<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
                      "http://www.w3.org/TR/html4/strict.dtd">

<html>
<head>
  <title>Kaleidoscope: Extending the Language: Mutable Variables / SSA
         construction</title>
  <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
  <meta name="author" content="Chris Lattner">
  <meta name="author" content="Erick Tryzelaar">
  <link rel="stylesheet" href="../llvm.css" type="text/css">
</head>

<body>

<h1>Kaleidoscope: Extending the Language: Mutable Variables</h1>

<ul>
<li><a href="index.html">Up to Tutorial Index</a></li>
<li>Chapter 7
  <ol>
    <li><a href="#intro">Chapter 7 Introduction</a></li>
    <li><a href="#why">Why is this a hard problem?</a></li>
    <li><a href="#memory">Memory in LLVM</a></li>
    <li><a href="#kalvars">Mutable Variables in Kaleidoscope</a></li>
    <li><a href="#adjustments">Adjusting Existing Variables for
     Mutation</a></li>
    <li><a href="#assignment">New Assignment Operator</a></li>
    <li><a href="#localvars">User-defined Local Variables</a></li>
    <li><a href="#code">Full Code Listing</a></li>
  </ol>
</li>
<li><a href="OCamlLangImpl8.html">Chapter 8</a>: Conclusion and other useful LLVM
 tidbits</li>
</ul>

<div class="doc_author">
	<p>
		Written by <a href="mailto:sabre@nondot.org">Chris Lattner</a>
		and <a href="mailto:idadesub@users.sourceforge.net">Erick Tryzelaar</a>
	</p>
</div>

<!-- *********************************************************************** -->
<h2><a name="intro">Chapter 7 Introduction</a></h2>
<!-- *********************************************************************** -->

<div>

<p>Welcome to Chapter 7 of the "<a href="index.html">Implementing a language
with LLVM</a>" tutorial.  In chapters 1 through 6, we've built a very
respectable, albeit simple, <a
href="http://en.wikipedia.org/wiki/Functional_programming">functional
programming language</a>.  In our journey, we learned some parsing techniques,
how to build and represent an AST, how to build LLVM IR, and how to optimize
the resultant code as well as JIT compile it.</p>

<p>While Kaleidoscope is interesting as a functional language, the fact that it
is functional makes it "too easy" to generate LLVM IR for it.  In particular, a
functional language makes it very easy to build LLVM IR directly in <a
href="http://en.wikipedia.org/wiki/Static_single_assignment_form">SSA form</a>.
Since LLVM requires that the input code be in SSA form, this is a very nice
property and it is often unclear to newcomers how to generate code for an
imperative language with mutable variables.</p>

<p>The short (and happy) summary of this chapter is that there is no need for
your front-end to build SSA form: LLVM provides highly tuned and well tested
support for this, though the way it works is a bit unexpected for some.</p>

</div>

<!-- *********************************************************************** -->
<h2><a name="why">Why is this a hard problem?</a></h2>
<!-- *********************************************************************** -->

<div>

<p>
To understand why mutable variables cause complexities in SSA construction,
consider this extremely simple C example:
</p>

<div class="doc_code">
<pre>
int G, H;
int test(_Bool Condition) {
  int X;
  if (Condition)
    X = G;
  else
    X = H;
  return X;
}
</pre>
</div>

<p>In this case, we have the variable "X", whose value depends on the path
executed in the program.  Because there are two different possible values for X
before the return instruction, a PHI node is inserted to merge the two values.
The LLVM IR that we want for this example looks like this:</p>

<div class="doc_code">
<pre>
@G = weak global i32 0   ; type of @G is i32*
@H = weak global i32 0   ; type of @H is i32*

define i32 @test(i1 %Condition) {
entry:
  br i1 %Condition, label %cond_true, label %cond_false

cond_true:
  %X.0 = load i32* @G
  br label %cond_next

cond_false:
  %X.1 = load i32* @H
  br label %cond_next

cond_next:
  %X.2 = phi i32 [ %X.1, %cond_false ], [ %X.0, %cond_true ]
  ret i32 %X.2
}
</pre>
</div>

<p>In this example, the loads from the G and H global variables are explicit in
the LLVM IR, and they live in the then/else branches of the if statement
(cond_true/cond_false).  In order to merge the incoming values, the X.2 phi node
in the cond_next block selects the right value to use based on where control
flow is coming from: if control flow comes from the cond_false block, X.2 gets
the value of X.1.  Alternatively, if control flow comes from cond_true, it gets
the value of X.0.  The intent of this chapter is not to explain the details of
SSA form.  For more information, see one of the many <a
href="http://en.wikipedia.org/wiki/Static_single_assignment_form">online
references</a>.</p>

<p>The question for this article is "who places the phi nodes when lowering
assignments to mutable variables?".  The issue here is that LLVM
<em>requires</em> that its IR be in SSA form: there is no "non-ssa" mode for it.
However, SSA construction requires non-trivial algorithms and data structures,
so it is inconvenient and wasteful for every front-end to have to reproduce this
logic.</p>

</div>

<!-- *********************************************************************** -->
<h2><a name="memory">Memory in LLVM</a></h2>
<!-- *********************************************************************** -->

<div>

<p>The 'trick' here is that while LLVM does require all register values to be
in SSA form, it does not require (or permit) memory objects to be in SSA form.
In the example above, note that the loads from G and H are direct accesses to
G and H: they are not renamed or versioned.  This differs from some other
compiler systems, which do try to version memory objects.  In LLVM, instead of
encoding dataflow analysis of memory into the LLVM IR, it is handled with <a
href="../WritingAnLLVMPass.html">Analysis Passes</a> which are computed on
demand.</p>

<p>
With this in mind, the high-level idea is that we want to make a stack variable
(which lives in memory, because it is on the stack) for each mutable object in
a function.  To take advantage of this trick, we need to talk about how LLVM
represents stack variables.
</p>

<p>In LLVM, all memory accesses are explicit with load/store instructions, and
it is carefully designed not to have (or need) an "address-of" operator.  Notice
how the type of the @G/@H global variables is actually "i32*" even though the
variable is defined as "i32".  What this means is that @G defines <em>space</em>
for an i32 in the global data area, but its <em>name</em> actually refers to the
address for that space.  Stack variables work the same way, except that instead of
being declared with global variable definitions, they are declared with the
<a href="../LangRef.html#i_alloca">LLVM alloca instruction</a>:</p>

<div class="doc_code">
<pre>
define i32 @example() {
entry:
  %X = alloca i32           ; type of %X is i32*.
  ...
  %tmp = load i32* %X       ; load the stack value %X from the stack.
  %tmp2 = add i32 %tmp, 1   ; increment it
  store i32 %tmp2, i32* %X  ; store it back
  ...
</pre>
</div>

<p>This code shows an example of how you can declare and manipulate a stack
variable in the LLVM IR.  Stack memory allocated with the alloca instruction is
fully general: you can pass the address of the stack slot to functions, you can
store it in other variables, etc.  In our example above, we could rewrite the
example to use the alloca technique to avoid using a PHI node:</p>

<div class="doc_code">
<pre>
@G = weak global i32 0   ; type of @G is i32*
@H = weak global i32 0   ; type of @H is i32*

define i32 @test(i1 %Condition) {
entry:
  %X = alloca i32           ; type of %X is i32*.
  br i1 %Condition, label %cond_true, label %cond_false

cond_true:
  %X.0 = load i32* @G
        store i32 %X.0, i32* %X   ; Update X
  br label %cond_next

cond_false:
  %X.1 = load i32* @H
        store i32 %X.1, i32* %X   ; Update X
  br label %cond_next

cond_next:
  %X.2 = load i32* %X       ; Read X
  ret i32 %X.2
}
</pre>
</div>

<p>With this, we have discovered a way to handle arbitrary mutable variables
without the need to create Phi nodes at all:</p>

<ol>
<li>Each mutable variable becomes a stack allocation.</li>
<li>Each read of the variable becomes a load from the stack.</li>
<li>Each update of the variable becomes a store to the stack.</li>
<li>Taking the address of a variable just uses the stack address directly.</li>
</ol>

<p>While this solution has solved our immediate problem, it introduced another
one: we have now apparently introduced a lot of stack traffic for very simple
and common operations, a major performance problem.  Fortunately for us, the
LLVM optimizer has a highly-tuned optimization pass named "mem2reg" that handles
this case, promoting allocas like this into SSA registers, inserting Phi nodes
as appropriate.  If you run this example through the pass, for example, you'll
get:</p>

<div class="doc_code">
<pre>
$ <b>llvm-as &lt; example.ll | opt -mem2reg | llvm-dis</b>
@G = weak global i32 0
@H = weak global i32 0

define i32 @test(i1 %Condition) {
entry:
  br i1 %Condition, label %cond_true, label %cond_false

cond_true:
  %X.0 = load i32* @G
  br label %cond_next

cond_false:
  %X.1 = load i32* @H
  br label %cond_next

cond_next:
  %X.01 = phi i32 [ %X.1, %cond_false ], [ %X.0, %cond_true ]
  ret i32 %X.01
}
</pre>
</div>

<p>The mem2reg pass implements the standard "iterated dominance frontier"
algorithm for constructing SSA form and has a number of optimizations that speed
up (very common) degenerate cases. The mem2reg optimization pass is the answer
to dealing with mutable variables, and we highly recommend that you depend on
it.  Note that mem2reg only works on variables in certain circumstances:</p>

<ol>
<li>mem2reg is alloca-driven: it looks for allocas and if it can handle them, it
promotes them.  It does not apply to global variables or heap allocations.</li>

<li>mem2reg only looks for alloca instructions in the entry block of the
function.  Being in the entry block guarantees that the alloca is only executed
once, which makes analysis simpler.</li>

<li>mem2reg only promotes allocas whose uses are direct loads and stores.  If
the address of the stack object is passed to a function, or if any funny pointer
arithmetic is involved, the alloca will not be promoted.</li>

<li>mem2reg only works on allocas of <a
href="../LangRef.html#t_classifications">first class</a>
values (such as pointers, scalars and vectors), and only if the array size
of the allocation is 1 (or missing in the .ll file).  mem2reg is not capable of
promoting structs or arrays to registers.  Note that the "scalarrepl" pass is
more powerful and can promote structs, "unions", and arrays in many cases.</li>

</ol>

<p>
All of these properties are easy to satisfy for most imperative languages, and
we'll illustrate it below with Kaleidoscope.  The final question you may be
asking is: should I bother with this nonsense for my front-end?  Wouldn't it be
better if I just did SSA construction directly, avoiding use of the mem2reg
optimization pass?  In short, we strongly recommend that you use this technique
for building SSA form, unless there is an extremely good reason not to.  Using
this technique is:</p>

<ul>
<li>Proven and well tested: llvm-gcc and clang both use this technique for local
mutable variables.  As such, the most common clients of LLVM are using this to
handle a bulk of their variables.  You can be sure that bugs are found fast and
fixed early.</li>

<li>Extremely Fast: mem2reg has a number of special cases that make it fast in
common cases as well as fully general.  For example, it has fast-paths for
variables that are only used in a single block, variables that only have one
assignment point, good heuristics to avoid insertion of unneeded phi nodes, etc.
</li>

<li>Needed for debug info generation: <a href="../SourceLevelDebugging.html">
Debug information in LLVM</a> relies on having the address of the variable
exposed so that debug info can be attached to it.  This technique dovetails
very naturally with this style of debug info.</li>
</ul>

<p>If nothing else, this makes it much easier to get your front-end up and
running, and is very simple to implement.  Lets extend Kaleidoscope with mutable
variables now!
</p>

</div>

<!-- *********************************************************************** -->
<h2><a name="kalvars">Mutable Variables in Kaleidoscope</a></h2>
<!-- *********************************************************************** -->

<div>

<p>Now that we know the sort of problem we want to tackle, lets see what this
looks like in the context of our little Kaleidoscope language.  We're going to
add two features:</p>

<ol>
<li>The ability to mutate variables with the '=' operator.</li>
<li>The ability to define new variables.</li>
</ol>

<p>While the first item is really what this is about, we only have variables
for incoming arguments as well as for induction variables, and redefining those only
goes so far :).  Also, the ability to define new variables is a
useful thing regardless of whether you will be mutating them.  Here's a
motivating example that shows how we could use these:</p>

<div class="doc_code">
<pre>
# Define ':' for sequencing: as a low-precedence operator that ignores operands
# and just returns the RHS.
def binary : 1 (x y) y;

# Recursive fib, we could do this before.
def fib(x)
  if (x &lt; 3) then
    1
  else
    fib(x-1)+fib(x-2);

# Iterative fib.
def fibi(x)
  <b>var a = 1, b = 1, c in</b>
  (for i = 3, i &lt; x in
     <b>c = a + b</b> :
     <b>a = b</b> :
     <b>b = c</b>) :
  b;

# Call it.
fibi(10);
</pre>
</div>

<p>
In order to mutate variables, we have to change our existing variables to use
the "alloca trick".  Once we have that, we'll add our new operator, then extend
Kaleidoscope to support new variable definitions.
</p>

</div>

<!-- *********************************************************************** -->
<h2><a name="adjustments">Adjusting Existing Variables for Mutation</a></h2>
<!-- *********************************************************************** -->

<div>

<p>
The symbol table in Kaleidoscope is managed at code generation time by the
'<tt>named_values</tt>' map.  This map currently keeps track of the LLVM
"Value*" that holds the double value for the named variable.  In order to
support mutation, we need to change this slightly, so that it
<tt>named_values</tt> holds the <em>memory location</em> of the variable in
question.  Note that this change is a refactoring: it changes the structure of
the code, but does not (by itself) change the behavior of the compiler.  All of
these changes are isolated in the Kaleidoscope code generator.</p>

<p>
At this point in Kaleidoscope's development, it only supports variables for two
things: incoming arguments to functions and the induction variable of 'for'
loops.  For consistency, we'll allow mutation of these variables in addition to
other user-defined variables.  This means that these will both need memory
locations.
</p>

<p>To start our transformation of Kaleidoscope, we'll change the
<tt>named_values</tt> map so that it maps to AllocaInst* instead of Value*.
Once we do this, the C++ compiler will tell us what parts of the code we need to
update:</p>

<p><b>Note:</b> the ocaml bindings currently model both <tt>Value*</tt>s and
<tt>AllocInst*</tt>s as <tt>Llvm.llvalue</tt>s, but this may change in the
future to be more type safe.</p>

<div class="doc_code">
<pre>
let named_values:(string, llvalue) Hashtbl.t = Hashtbl.create 10
</pre>
</div>

<p>Also, since we will need to create these alloca's, we'll use a helper
function that ensures that the allocas are created in the entry block of the
function:</p>

<div class="doc_code">
<pre>
(* Create an alloca instruction in the entry block of the function. This
 * is used for mutable variables etc. *)
let create_entry_block_alloca the_function var_name =
  let builder = builder_at (instr_begin (entry_block the_function)) in
  build_alloca double_type var_name builder
</pre>
</div>

<p>This funny looking code creates an <tt>Llvm.llbuilder</tt> object that is
pointing at the first instruction of the entry block.  It then creates an alloca
with the expected name and returns it.  Because all values in Kaleidoscope are
doubles, there is no need to pass in a type to use.</p>

<p>With this in place, the first functionality change we want to make is to
variable references.  In our new scheme, variables live on the stack, so code
generating a reference to them actually needs to produce a load from the stack
slot:</p>

<div class="doc_code">
<pre>
let rec codegen_expr = function
  ...
  | Ast.Variable name -&gt;
      let v = try Hashtbl.find named_values name with
        | Not_found -&gt; raise (Error "unknown variable name")
      in
      <b>(* Load the value. *)
      build_load v name builder</b>
</pre>
</div>

<p>As you can see, this is pretty straightforward.  Now we need to update the
things that define the variables to set up the alloca.  We'll start with
<tt>codegen_expr Ast.For ...</tt> (see the <a href="#code">full code listing</a>
for the unabridged code):</p>

<div class="doc_code">
<pre>
  | Ast.For (var_name, start, end_, step, body) -&gt;
      let the_function = block_parent (insertion_block builder) in

      (* Create an alloca for the variable in the entry block. *)
      <b>let alloca = create_entry_block_alloca the_function var_name in</b>

      (* Emit the start code first, without 'variable' in scope. *)
      let start_val = codegen_expr start in

      <b>(* Store the value into the alloca. *)
      ignore(build_store start_val alloca builder);</b>

      ...

      (* Within the loop, the variable is defined equal to the PHI node. If it
       * shadows an existing variable, we have to restore it, so save it
       * now. *)
      let old_val =
        try Some (Hashtbl.find named_values var_name) with Not_found -&gt; None
      in
      <b>Hashtbl.add named_values var_name alloca;</b>

      ...

      (* Compute the end condition. *)
      let end_cond = codegen_expr end_ in

      <b>(* Reload, increment, and restore the alloca. This handles the case where
       * the body of the loop mutates the variable. *)
      let cur_var = build_load alloca var_name builder in
      let next_var = build_add cur_var step_val "nextvar" builder in
      ignore(build_store next_var alloca builder);</b>
      ...
</pre>
</div>

<p>This code is virtually identical to the code <a
href="OCamlLangImpl5.html#forcodegen">before we allowed mutable variables</a>.
The big difference is that we no longer have to construct a PHI node, and we use
load/store to access the variable as needed.</p>

<p>To support mutable argument variables, we need to also make allocas for them.
The code for this is also pretty simple:</p>

<div class="doc_code">
<pre>
(* Create an alloca for each argument and register the argument in the symbol
 * table so that references to it will succeed. *)
let create_argument_allocas the_function proto =
  let args = match proto with
    | Ast.Prototype (_, args) | Ast.BinOpPrototype (_, args, _) -&gt; args
  in
  Array.iteri (fun i ai -&gt;
    let var_name = args.(i) in
    (* Create an alloca for this variable. *)
    let alloca = create_entry_block_alloca the_function var_name in

    (* Store the initial value into the alloca. *)
    ignore(build_store ai alloca builder);

    (* Add arguments to variable symbol table. *)
    Hashtbl.add named_values var_name alloca;
  ) (params the_function)
</pre>
</div>

<p>For each argument, we make an alloca, store the input value to the function
into the alloca, and register the alloca as the memory location for the
argument.  This method gets invoked by <tt>Codegen.codegen_func</tt> right after
it sets up the entry block for the function.</p>

<p>The final missing piece is adding the mem2reg pass, which allows us to get
good codegen once again:</p>

<div class="doc_code">
<pre>
let main () =
  ...
  let the_fpm = PassManager.create_function Codegen.the_module in

  (* Set up the optimizer pipeline.  Start with registering info about how the
   * target lays out data structures. *)
  TargetData.add (ExecutionEngine.target_data the_execution_engine) the_fpm;

  <b>(* Promote allocas to registers. *)
  add_memory_to_register_promotion the_fpm;</b>

  (* Do simple "peephole" optimizations and bit-twiddling optzn. *)
  add_instruction_combining the_fpm;

  (* reassociate expressions. *)
  add_reassociation the_fpm;
</pre>
</div>

<p>It is interesting to see what the code looks like before and after the
mem2reg optimization runs.  For example, this is the before/after code for our
recursive fib function.  Before the optimization:</p>

<div class="doc_code">
<pre>
define double @fib(double %x) {
entry:
  <b>%x1 = alloca double
  store double %x, double* %x1
  %x2 = load double* %x1</b>
  %cmptmp = fcmp ult double %x2, 3.000000e+00
  %booltmp = uitofp i1 %cmptmp to double
  %ifcond = fcmp one double %booltmp, 0.000000e+00
  br i1 %ifcond, label %then, label %else

then:    ; preds = %entry
  br label %ifcont

else:    ; preds = %entry
  <b>%x3 = load double* %x1</b>
  %subtmp = fsub double %x3, 1.000000e+00
  %calltmp = call double @fib(double %subtmp)
  <b>%x4 = load double* %x1</b>
  %subtmp5 = fsub double %x4, 2.000000e+00
  %calltmp6 = call double @fib(double %subtmp5)
  %addtmp = fadd double %calltmp, %calltmp6
  br label %ifcont

ifcont:    ; preds = %else, %then
  %iftmp = phi double [ 1.000000e+00, %then ], [ %addtmp, %else ]
  ret double %iftmp
}
</pre>
</div>

<p>Here there is only one variable (x, the input argument) but you can still
see the extremely simple-minded code generation strategy we are using.  In the
entry block, an alloca is created, and the initial input value is stored into
it.  Each reference to the variable does a reload from the stack.  Also, note
that we didn't modify the if/then/else expression, so it still inserts a PHI
node.  While we could make an alloca for it, it is actually easier to create a
PHI node for it, so we still just make the PHI.</p>

<p>Here is the code after the mem2reg pass runs:</p>

<div class="doc_code">
<pre>
define double @fib(double %x) {
entry:
  %cmptmp = fcmp ult double <b>%x</b>, 3.000000e+00
  %booltmp = uitofp i1 %cmptmp to double
  %ifcond = fcmp one double %booltmp, 0.000000e+00
  br i1 %ifcond, label %then, label %else

then:
  br label %ifcont

else:
  %subtmp = fsub double <b>%x</b>, 1.000000e+00
  %calltmp = call double @fib(double %subtmp)
  %subtmp5 = fsub double <b>%x</b>, 2.000000e+00
  %calltmp6 = call double @fib(double %subtmp5)
  %addtmp = fadd double %calltmp, %calltmp6
  br label %ifcont

ifcont:    ; preds = %else, %then
  %iftmp = phi double [ 1.000000e+00, %then ], [ %addtmp, %else ]
  ret double %iftmp
}
</pre>
</div>

<p>This is a trivial case for mem2reg, since there are no redefinitions of the
variable.  The point of showing this is to calm your tension about inserting
such blatent inefficiencies :).</p>

<p>After the rest of the optimizers run, we get:</p>

<div class="doc_code">
<pre>
define double @fib(double %x) {
entry:
  %cmptmp = fcmp ult double %x, 3.000000e+00
  %booltmp = uitofp i1 %cmptmp to double
  %ifcond = fcmp ueq double %booltmp, 0.000000e+00
  br i1 %ifcond, label %else, label %ifcont

else:
  %subtmp = fsub double %x, 1.000000e+00
  %calltmp = call double @fib(double %subtmp)
  %subtmp5 = fsub double %x, 2.000000e+00
  %calltmp6 = call double @fib(double %subtmp5)
  %addtmp = fadd double %calltmp, %calltmp6
  ret double %addtmp

ifcont:
  ret double 1.000000e+00
}
</pre>
</div>

<p>Here we see that the simplifycfg pass decided to clone the return instruction
into the end of the 'else' block.  This allowed it to eliminate some branches
and the PHI node.</p>

<p>Now that all symbol table references are updated to use stack variables,
we'll add the assignment operator.</p>

</div>

<!-- *********************************************************************** -->
<h2><a name="assignment">New Assignment Operator</a></h2>
<!-- *********************************************************************** -->

<div>

<p>With our current framework, adding a new assignment operator is really
simple.  We will parse it just like any other binary operator, but handle it
internally (instead of allowing the user to define it).  The first step is to
set a precedence:</p>

<div class="doc_code">
<pre>
let main () =
  (* Install standard binary operators.
   * 1 is the lowest precedence. *)
  <b>Hashtbl.add Parser.binop_precedence '=' 2;</b>
  Hashtbl.add Parser.binop_precedence '&lt;' 10;
  Hashtbl.add Parser.binop_precedence '+' 20;
  Hashtbl.add Parser.binop_precedence '-' 20;
  ...
</pre>
</div>

<p>Now that the parser knows the precedence of the binary operator, it takes
care of all the parsing and AST generation.  We just need to implement codegen
for the assignment operator.  This looks like:</p>

<div class="doc_code">
<pre>
let rec codegen_expr = function
      begin match op with
      | '=' -&gt;
          (* Special case '=' because we don't want to emit the LHS as an
           * expression. *)
          let name =
            match lhs with
            | Ast.Variable name -&gt; name
            | _ -&gt; raise (Error "destination of '=' must be a variable")
          in
</pre>
</div>

<p>Unlike the rest of the binary operators, our assignment operator doesn't
follow the "emit LHS, emit RHS, do computation" model.  As such, it is handled
as a special case before the other binary operators are handled.  The other
strange thing is that it requires the LHS to be a variable.  It is invalid to
have "(x+1) = expr" - only things like "x = expr" are allowed.
</p>


<div class="doc_code">
<pre>
          (* Codegen the rhs. *)
          let val_ = codegen_expr rhs in

          (* Lookup the name. *)
          let variable = try Hashtbl.find named_values name with
          | Not_found -&gt; raise (Error "unknown variable name")
          in
          ignore(build_store val_ variable builder);
          val_
      | _ -&gt;
			...
</pre>
</div>

<p>Once we have the variable, codegen'ing the assignment is straightforward:
we emit the RHS of the assignment, create a store, and return the computed
value.  Returning a value allows for chained assignments like "X = (Y = Z)".</p>

<p>Now that we have an assignment operator, we can mutate loop variables and
arguments.  For example, we can now run code like this:</p>

<div class="doc_code">
<pre>
# Function to print a double.
extern printd(x);

# Define ':' for sequencing: as a low-precedence operator that ignores operands
# and just returns the RHS.
def binary : 1 (x y) y;

def test(x)
  printd(x) :
  x = 4 :
  printd(x);

test(123);
</pre>
</div>

<p>When run, this example prints "123" and then "4", showing that we did
actually mutate the value!  Okay, we have now officially implemented our goal:
getting this to work requires SSA construction in the general case.  However,
to be really useful, we want the ability to define our own local variables, lets
add this next!
</p>

</div>

<!-- *********************************************************************** -->
<h2><a name="localvars">User-defined Local Variables</a></h2>
<!-- *********************************************************************** -->

<div>

<p>Adding var/in is just like any other other extensions we made to
Kaleidoscope: we extend the lexer, the parser, the AST and the code generator.
The first step for adding our new 'var/in' construct is to extend the lexer.
As before, this is pretty trivial, the code looks like this:</p>

<div class="doc_code">
<pre>
type token =
  ...
  <b>(* var definition *)
  | Var</b>

...

and lex_ident buffer = parser
      ...
      | "in" -&gt; [&lt; 'Token.In; stream &gt;]
      | "binary" -&gt; [&lt; 'Token.Binary; stream &gt;]
      | "unary" -&gt; [&lt; 'Token.Unary; stream &gt;]
      <b>| "var" -&gt; [&lt; 'Token.Var; stream &gt;]</b>
      ...
</pre>
</div>

<p>The next step is to define the AST node that we will construct.  For var/in,
it looks like this:</p>

<div class="doc_code">
<pre>
type expr =
  ...
  (* variant for var/in. *)
  | Var of (string * expr option) array * expr
  ...
</pre>
</div>

<p>var/in allows a list of names to be defined all at once, and each name can
optionally have an initializer value.  As such, we capture this information in
the VarNames vector.  Also, var/in has a body, this body is allowed to access
the variables defined by the var/in.</p>

<p>With this in place, we can define the parser pieces.  The first thing we do
is add it as a primary expression:</p>

<div class="doc_code">
<pre>
(* primary
 *   ::= identifier
 *   ::= numberexpr
 *   ::= parenexpr
 *   ::= ifexpr
 *   ::= forexpr
 <b>*   ::= varexpr</b> *)
let rec parse_primary = parser
  ...
  <b>(* varexpr
   *   ::= 'var' identifier ('=' expression?
   *             (',' identifier ('=' expression)?)* 'in' expression *)
  | [&lt; 'Token.Var;
       (* At least one variable name is required. *)
       'Token.Ident id ?? "expected identifier after var";
       init=parse_var_init;
       var_names=parse_var_names [(id, init)];
       (* At this point, we have to have 'in'. *)
       'Token.In ?? "expected 'in' keyword after 'var'";
       body=parse_expr &gt;] -&gt;
      Ast.Var (Array.of_list (List.rev var_names), body)</b>

...

and parse_var_init = parser
  (* read in the optional initializer. *)
  | [&lt; 'Token.Kwd '='; e=parse_expr &gt;] -&gt; Some e
  | [&lt; &gt;] -&gt; None

and parse_var_names accumulator = parser
  | [&lt; 'Token.Kwd ',';
       'Token.Ident id ?? "expected identifier list after var";
       init=parse_var_init;
       e=parse_var_names ((id, init) :: accumulator) &gt;] -&gt; e
  | [&lt; &gt;] -&gt; accumulator
</pre>
</div>

<p>Now that we can parse and represent the code, we need to support emission of
LLVM IR for it.  This code starts out with:</p>

<div class="doc_code">
<pre>
let rec codegen_expr = function
  ...
  | Ast.Var (var_names, body)
      let old_bindings = ref [] in

      let the_function = block_parent (insertion_block builder) in

      (* Register all variables and emit their initializer. *)
      Array.iter (fun (var_name, init) -&gt;
</pre>
</div>

<p>Basically it loops over all the variables, installing them one at a time.
For each variable we put into the symbol table, we remember the previous value
that we replace in OldBindings.</p>

<div class="doc_code">
<pre>
        (* Emit the initializer before adding the variable to scope, this
         * prevents the initializer from referencing the variable itself, and
         * permits stuff like this:
         *   var a = 1 in
         *     var a = a in ...   # refers to outer 'a'. *)
        let init_val =
          match init with
          | Some init -&gt; codegen_expr init
          (* If not specified, use 0.0. *)
          | None -&gt; const_float double_type 0.0
        in

        let alloca = create_entry_block_alloca the_function var_name in
        ignore(build_store init_val alloca builder);

        (* Remember the old variable binding so that we can restore the binding
         * when we unrecurse. *)

        begin
          try
            let old_value = Hashtbl.find named_values var_name in
            old_bindings := (var_name, old_value) :: !old_bindings;
          with Not_found &gt; ()
        end;

        (* Remember this binding. *)
        Hashtbl.add named_values var_name alloca;
      ) var_names;
</pre>
</div>

<p>There are more comments here than code.  The basic idea is that we emit the
initializer, create the alloca, then update the symbol table to point to it.
Once all the variables are installed in the symbol table, we evaluate the body
of the var/in expression:</p>

<div class="doc_code">
<pre>
      (* Codegen the body, now that all vars are in scope. *)
      let body_val = codegen_expr body in
</pre>
</div>

<p>Finally, before returning, we restore the previous variable bindings:</p>

<div class="doc_code">
<pre>
      (* Pop all our variables from scope. *)
      List.iter (fun (var_name, old_value) -&gt;
        Hashtbl.add named_values var_name old_value
      ) !old_bindings;

      (* Return the body computation. *)
      body_val
</pre>
</div>

<p>The end result of all of this is that we get properly scoped variable
definitions, and we even (trivially) allow mutation of them :).</p>

<p>With this, we completed what we set out to do.  Our nice iterative fib
example from the intro compiles and runs just fine.  The mem2reg pass optimizes
all of our stack variables into SSA registers, inserting PHI nodes where needed,
and our front-end remains simple: no "iterated dominance frontier" computation
anywhere in sight.</p>

</div>

<!-- *********************************************************************** -->
<h2><a name="code">Full Code Listing</a></h2>
<!-- *********************************************************************** -->

<div>

<p>
Here is the complete code listing for our running example, enhanced with mutable
variables and var/in support.  To build this example, use:
</p>

<div class="doc_code">
<pre>
# Compile
ocamlbuild toy.byte
# Run
./toy.byte
</pre>
</div>

<p>Here is the code:</p>

<dl>
<dt>_tags:</dt>
<dd class="doc_code">
<pre>
&lt;{lexer,parser}.ml&gt;: use_camlp4, pp(camlp4of)
&lt;*.{byte,native}&gt;: g++, use_llvm, use_llvm_analysis
&lt;*.{byte,native}&gt;: use_llvm_executionengine, use_llvm_target
&lt;*.{byte,native}&gt;: use_llvm_scalar_opts, use_bindings
</pre>
</dd>

<dt>myocamlbuild.ml:</dt>
<dd class="doc_code">
<pre>
open Ocamlbuild_plugin;;

ocaml_lib ~extern:true "llvm";;
ocaml_lib ~extern:true "llvm_analysis";;
ocaml_lib ~extern:true "llvm_executionengine";;
ocaml_lib ~extern:true "llvm_target";;
ocaml_lib ~extern:true "llvm_scalar_opts";;

flag ["link"; "ocaml"; "g++"] (S[A"-cc"; A"g++"; A"-cclib"; A"-rdynamic"]);;
dep ["link"; "ocaml"; "use_bindings"] ["bindings.o"];;
</pre>
</dd>

<dt>token.ml:</dt>
<dd class="doc_code">
<pre>
(*===----------------------------------------------------------------------===
 * Lexer Tokens
 *===----------------------------------------------------------------------===*)

(* The lexer returns these 'Kwd' if it is an unknown character, otherwise one of
 * these others for known things. *)
type token =
  (* commands *)
  | Def | Extern

  (* primary *)
  | Ident of string | Number of float

  (* unknown *)
  | Kwd of char

  (* control *)
  | If | Then | Else
  | For | In

  (* operators *)
  | Binary | Unary

  (* var definition *)
  | Var
</pre>
</dd>

<dt>lexer.ml:</dt>
<dd class="doc_code">
<pre>
(*===----------------------------------------------------------------------===
 * Lexer
 *===----------------------------------------------------------------------===*)

let rec lex = parser
  (* Skip any whitespace. *)
  | [&lt; ' (' ' | '\n' | '\r' | '\t'); stream &gt;] -&gt; lex stream

  (* identifier: [a-zA-Z][a-zA-Z0-9] *)
  | [&lt; ' ('A' .. 'Z' | 'a' .. 'z' as c); stream &gt;] -&gt;
      let buffer = Buffer.create 1 in
      Buffer.add_char buffer c;
      lex_ident buffer stream

  (* number: [0-9.]+ *)
  | [&lt; ' ('0' .. '9' as c); stream &gt;] -&gt;
      let buffer = Buffer.create 1 in
      Buffer.add_char buffer c;
      lex_number buffer stream

  (* Comment until end of line. *)
  | [&lt; ' ('#'); stream &gt;] -&gt;
      lex_comment stream

  (* Otherwise, just return the character as its ascii value. *)
  | [&lt; 'c; stream &gt;] -&gt;
      [&lt; 'Token.Kwd c; lex stream &gt;]

  (* end of stream. *)
  | [&lt; &gt;] -&gt; [&lt; &gt;]

and lex_number buffer = parser
  | [&lt; ' ('0' .. '9' | '.' as c); stream &gt;] -&gt;
      Buffer.add_char buffer c;
      lex_number buffer stream
  | [&lt; stream=lex &gt;] -&gt;
      [&lt; 'Token.Number (float_of_string (Buffer.contents buffer)); stream &gt;]

and lex_ident buffer = parser
  | [&lt; ' ('A' .. 'Z' | 'a' .. 'z' | '0' .. '9' as c); stream &gt;] -&gt;
      Buffer.add_char buffer c;
      lex_ident buffer stream
  | [&lt; stream=lex &gt;] -&gt;
      match Buffer.contents buffer with
      | "def" -&gt; [&lt; 'Token.Def; stream &gt;]
      | "extern" -&gt; [&lt; 'Token.Extern; stream &gt;]
      | "if" -&gt; [&lt; 'Token.If; stream &gt;]
      | "then" -&gt; [&lt; 'Token.Then; stream &gt;]
      | "else" -&gt; [&lt; 'Token.Else; stream &gt;]
      | "for" -&gt; [&lt; 'Token.For; stream &gt;]
      | "in" -&gt; [&lt; 'Token.In; stream &gt;]
      | "binary" -&gt; [&lt; 'Token.Binary; stream &gt;]
      | "unary" -&gt; [&lt; 'Token.Unary; stream &gt;]
      | "var" -&gt; [&lt; 'Token.Var; stream &gt;]
      | id -&gt; [&lt; 'Token.Ident id; stream &gt;]

and lex_comment = parser
  | [&lt; ' ('\n'); stream=lex &gt;] -&gt; stream
  | [&lt; 'c; e=lex_comment &gt;] -&gt; e
  | [&lt; &gt;] -&gt; [&lt; &gt;]
</pre>
</dd>

<dt>ast.ml:</dt>
<dd class="doc_code">
<pre>
(*===----------------------------------------------------------------------===
 * Abstract Syntax Tree (aka Parse Tree)
 *===----------------------------------------------------------------------===*)

(* expr - Base type for all expression nodes. *)
type expr =
  (* variant for numeric literals like "1.0". *)
  | Number of float

  (* variant for referencing a variable, like "a". *)
  | Variable of string

  (* variant for a unary operator. *)
  | Unary of char * expr

  (* variant for a binary operator. *)
  | Binary of char * expr * expr

  (* variant for function calls. *)
  | Call of string * expr array

  (* variant for if/then/else. *)
  | If of expr * expr * expr

  (* variant for for/in. *)
  | For of string * expr * expr * expr option * expr

  (* variant for var/in. *)
  | Var of (string * expr option) array * expr

(* proto - This type represents the "prototype" for a function, which captures
 * its name, and its argument names (thus implicitly the number of arguments the
 * function takes). *)
type proto =
  | Prototype of string * string array
  | BinOpPrototype of string * string array * int

(* func - This type represents a function definition itself. *)
type func = Function of proto * expr
</pre>
</dd>

<dt>parser.ml:</dt>
<dd class="doc_code">
<pre>
(*===---------------------------------------------------------------------===
 * Parser
 *===---------------------------------------------------------------------===*)

(* binop_precedence - This holds the precedence for each binary operator that is
 * defined *)
let binop_precedence:(char, int) Hashtbl.t = Hashtbl.create 10

(* precedence - Get the precedence of the pending binary operator token. *)
let precedence c = try Hashtbl.find binop_precedence c with Not_found -&gt; -1

(* primary
 *   ::= identifier
 *   ::= numberexpr
 *   ::= parenexpr
 *   ::= ifexpr
 *   ::= forexpr
 *   ::= varexpr *)
let rec parse_primary = parser
  (* numberexpr ::= number *)
  | [&lt; 'Token.Number n &gt;] -&gt; Ast.Number n

  (* parenexpr ::= '(' expression ')' *)
  | [&lt; 'Token.Kwd '('; e=parse_expr; 'Token.Kwd ')' ?? "expected ')'" &gt;] -&gt; e

  (* identifierexpr
   *   ::= identifier
   *   ::= identifier '(' argumentexpr ')' *)
  | [&lt; 'Token.Ident id; stream &gt;] -&gt;
      let rec parse_args accumulator = parser
        | [&lt; e=parse_expr; stream &gt;] -&gt;
            begin parser
              | [&lt; 'Token.Kwd ','; e=parse_args (e :: accumulator) &gt;] -&gt; e
              | [&lt; &gt;] -&gt; e :: accumulator
            end stream
        | [&lt; &gt;] -&gt; accumulator
      in
      let rec parse_ident id = parser
        (* Call. *)
        | [&lt; 'Token.Kwd '(';
             args=parse_args [];
             'Token.Kwd ')' ?? "expected ')'"&gt;] -&gt;
            Ast.Call (id, Array.of_list (List.rev args))

        (* Simple variable ref. *)
        | [&lt; &gt;] -&gt; Ast.Variable id
      in
      parse_ident id stream

  (* ifexpr ::= 'if' expr 'then' expr 'else' expr *)
  | [&lt; 'Token.If; c=parse_expr;
       'Token.Then ?? "expected 'then'"; t=parse_expr;
       'Token.Else ?? "expected 'else'"; e=parse_expr &gt;] -&gt;
      Ast.If (c, t, e)

  (* forexpr
        ::= 'for' identifier '=' expr ',' expr (',' expr)? 'in' expression *)
  | [&lt; 'Token.For;
       'Token.Ident id ?? "expected identifier after for";
       'Token.Kwd '=' ?? "expected '=' after for";
       stream &gt;] -&gt;
      begin parser
        | [&lt;
             start=parse_expr;
             'Token.Kwd ',' ?? "expected ',' after for";
             end_=parse_expr;
             stream &gt;] -&gt;
            let step =
              begin parser
              | [&lt; 'Token.Kwd ','; step=parse_expr &gt;] -&gt; Some step
              | [&lt; &gt;] -&gt; None
              end stream
            in
            begin parser
            | [&lt; 'Token.In; body=parse_expr &gt;] -&gt;
                Ast.For (id, start, end_, step, body)
            | [&lt; &gt;] -&gt;
                raise (Stream.Error "expected 'in' after for")
            end stream
        | [&lt; &gt;] -&gt;
            raise (Stream.Error "expected '=' after for")
      end stream

  (* varexpr
   *   ::= 'var' identifier ('=' expression?
   *             (',' identifier ('=' expression)?)* 'in' expression *)
  | [&lt; 'Token.Var;
       (* At least one variable name is required. *)
       'Token.Ident id ?? "expected identifier after var";
       init=parse_var_init;
       var_names=parse_var_names [(id, init)];
       (* At this point, we have to have 'in'. *)
       'Token.In ?? "expected 'in' keyword after 'var'";
       body=parse_expr &gt;] -&gt;
      Ast.Var (Array.of_list (List.rev var_names), body)

  | [&lt; &gt;] -&gt; raise (Stream.Error "unknown token when expecting an expression.")

(* unary
 *   ::= primary
 *   ::= '!' unary *)
and parse_unary = parser
  (* If this is a unary operator, read it. *)
  | [&lt; 'Token.Kwd op when op != '(' &amp;&amp; op != ')'; operand=parse_expr &gt;] -&gt;
      Ast.Unary (op, operand)

  (* If the current token is not an operator, it must be a primary expr. *)
  | [&lt; stream &gt;] -&gt; parse_primary stream

(* binoprhs
 *   ::= ('+' primary)* *)
and parse_bin_rhs expr_prec lhs stream =
  match Stream.peek stream with
  (* If this is a binop, find its precedence. *)
  | Some (Token.Kwd c) when Hashtbl.mem binop_precedence c -&gt;
      let token_prec = precedence c in

      (* If this is a binop that binds at least as tightly as the current binop,
       * consume it, otherwise we are done. *)
      if token_prec &lt; expr_prec then lhs else begin
        (* Eat the binop. *)
        Stream.junk stream;

        (* Parse the primary expression after the binary operator. *)
        let rhs = parse_unary stream in

        (* Okay, we know this is a binop. *)
        let rhs =
          match Stream.peek stream with
          | Some (Token.Kwd c2) -&gt;
              (* If BinOp binds less tightly with rhs than the operator after
               * rhs, let the pending operator take rhs as its lhs. *)
              let next_prec = precedence c2 in
              if token_prec &lt; next_prec
              then parse_bin_rhs (token_prec + 1) rhs stream
              else rhs
          | _ -&gt; rhs
        in

        (* Merge lhs/rhs. *)
        let lhs = Ast.Binary (c, lhs, rhs) in
        parse_bin_rhs expr_prec lhs stream
      end
  | _ -&gt; lhs

and parse_var_init = parser
  (* read in the optional initializer. *)
  | [&lt; 'Token.Kwd '='; e=parse_expr &gt;] -&gt; Some e
  | [&lt; &gt;] -&gt; None

and parse_var_names accumulator = parser
  | [&lt; 'Token.Kwd ',';
       'Token.Ident id ?? "expected identifier list after var";
       init=parse_var_init;
       e=parse_var_names ((id, init) :: accumulator) &gt;] -&gt; e
  | [&lt; &gt;] -&gt; accumulator

(* expression
 *   ::= primary binoprhs *)
and parse_expr = parser
  | [&lt; lhs=parse_unary; stream &gt;] -&gt; parse_bin_rhs 0 lhs stream

(* prototype
 *   ::= id '(' id* ')'
 *   ::= binary LETTER number? (id, id)
 *   ::= unary LETTER number? (id) *)
let parse_prototype =
  let rec parse_args accumulator = parser
    | [&lt; 'Token.Ident id; e=parse_args (id::accumulator) &gt;] -&gt; e
    | [&lt; &gt;] -&gt; accumulator
  in
  let parse_operator = parser
    | [&lt; 'Token.Unary &gt;] -&gt; "unary", 1
    | [&lt; 'Token.Binary &gt;] -&gt; "binary", 2
  in
  let parse_binary_precedence = parser
    | [&lt; 'Token.Number n &gt;] -&gt; int_of_float n
    | [&lt; &gt;] -&gt; 30
  in
  parser
  | [&lt; 'Token.Ident id;
       'Token.Kwd '(' ?? "expected '(' in prototype";
       args=parse_args [];
       'Token.Kwd ')' ?? "expected ')' in prototype" &gt;] -&gt;
      (* success. *)
      Ast.Prototype (id, Array.of_list (List.rev args))
  | [&lt; (prefix, kind)=parse_operator;
       'Token.Kwd op ?? "expected an operator";
       (* Read the precedence if present. *)
       binary_precedence=parse_binary_precedence;
       'Token.Kwd '(' ?? "expected '(' in prototype";
        args=parse_args [];
       'Token.Kwd ')' ?? "expected ')' in prototype" &gt;] -&gt;
      let name = prefix ^ (String.make 1 op) in
      let args = Array.of_list (List.rev args) in

      (* Verify right number of arguments for operator. *)
      if Array.length args != kind
      then raise (Stream.Error "invalid number of operands for operator")
      else
        if kind == 1 then
          Ast.Prototype (name, args)
        else
          Ast.BinOpPrototype (name, args, binary_precedence)
  | [&lt; &gt;] -&gt;
      raise (Stream.Error "expected function name in prototype")

(* definition ::= 'def' prototype expression *)
let parse_definition = parser
  | [&lt; 'Token.Def; p=parse_prototype; e=parse_expr &gt;] -&gt;
      Ast.Function (p, e)

(* toplevelexpr ::= expression *)
let parse_toplevel = parser
  | [&lt; e=parse_expr &gt;] -&gt;
      (* Make an anonymous proto. *)
      Ast.Function (Ast.Prototype ("", [||]), e)

(*  external ::= 'extern' prototype *)
let parse_extern = parser
  | [&lt; 'Token.Extern; e=parse_prototype &gt;] -&gt; e
</pre>
</dd>

<dt>codegen.ml:</dt>
<dd class="doc_code">
<pre>
(*===----------------------------------------------------------------------===
 * Code Generation
 *===----------------------------------------------------------------------===*)

open Llvm

exception Error of string

let context = global_context ()
let the_module = create_module context "my cool jit"
let builder = builder context
let named_values:(string, llvalue) Hashtbl.t = Hashtbl.create 10
let double_type = double_type context

(* Create an alloca instruction in the entry block of the function. This
 * is used for mutable variables etc. *)
let create_entry_block_alloca the_function var_name =
  let builder = builder_at context (instr_begin (entry_block the_function)) in
  build_alloca double_type var_name builder

let rec codegen_expr = function
  | Ast.Number n -&gt; const_float double_type n
  | Ast.Variable name -&gt;
      let v = try Hashtbl.find named_values name with
        | Not_found -&gt; raise (Error "unknown variable name")
      in
      (* Load the value. *)
      build_load v name builder
  | Ast.Unary (op, operand) -&gt;
      let operand = codegen_expr operand in
      let callee = "unary" ^ (String.make 1 op) in
      let callee =
        match lookup_function callee the_module with
        | Some callee -&gt; callee
        | None -&gt; raise (Error "unknown unary operator")
      in
      build_call callee [|operand|] "unop" builder
  | Ast.Binary (op, lhs, rhs) -&gt;
      begin match op with
      | '=' -&gt;
          (* Special case '=' because we don't want to emit the LHS as an
           * expression. *)
          let name =
            match lhs with
            | Ast.Variable name -&gt; name
            | _ -&gt; raise (Error "destination of '=' must be a variable")
          in

          (* Codegen the rhs. *)
          let val_ = codegen_expr rhs in

          (* Lookup the name. *)
          let variable = try Hashtbl.find named_values name with
          | Not_found -&gt; raise (Error "unknown variable name")
          in
          ignore(build_store val_ variable builder);
          val_
      | _ -&gt;
          let lhs_val = codegen_expr lhs in
          let rhs_val = codegen_expr rhs in
          begin
            match op with
            | '+' -&gt; build_add lhs_val rhs_val "addtmp" builder
            | '-' -&gt; build_sub lhs_val rhs_val "subtmp" builder
            | '*' -&gt; build_mul lhs_val rhs_val "multmp" builder
            | '&lt;' -&gt;
                (* Convert bool 0/1 to double 0.0 or 1.0 *)
                let i = build_fcmp Fcmp.Ult lhs_val rhs_val "cmptmp" builder in
                build_uitofp i double_type "booltmp" builder
            | _ -&gt;
                (* If it wasn't a builtin binary operator, it must be a user defined
                 * one. Emit a call to it. *)
                let callee = "binary" ^ (String.make 1 op) in
                let callee =
                  match lookup_function callee the_module with
                  | Some callee -&gt; callee
                  | None -&gt; raise (Error "binary operator not found!")
                in
                build_call callee [|lhs_val; rhs_val|] "binop" builder
          end
      end
  | Ast.Call (callee, args) -&gt;
      (* Look up the name in the module table. *)
      let callee =
        match lookup_function callee the_module with
        | Some callee -&gt; callee
        | None -&gt; raise (Error "unknown function referenced")
      in
      let params = params callee in

      (* If argument mismatch error. *)
      if Array.length params == Array.length args then () else
        raise (Error "incorrect # arguments passed");
      let args = Array.map codegen_expr args in
      build_call callee args "calltmp" builder
  | Ast.If (cond, then_, else_) -&gt;
      let cond = codegen_expr cond in

      (* Convert condition to a bool by comparing equal to 0.0 *)
      let zero = const_float double_type 0.0 in
      let cond_val = build_fcmp Fcmp.One cond zero "ifcond" builder in

      (* Grab the first block so that we might later add the conditional branch
       * to it at the end of the function. *)
      let start_bb = insertion_block builder in
      let the_function = block_parent start_bb in

      let then_bb = append_block context "then" the_function in

      (* Emit 'then' value. *)
      position_at_end then_bb builder;
      let then_val = codegen_expr then_ in

      (* Codegen of 'then' can change the current block, update then_bb for the
       * phi. We create a new name because one is used for the phi node, and the
       * other is used for the conditional branch. *)
      let new_then_bb = insertion_block builder in

      (* Emit 'else' value. *)
      let else_bb = append_block context "else" the_function in
      position_at_end else_bb builder;
      let else_val = codegen_expr else_ in

      (* Codegen of 'else' can change the current block, update else_bb for the
       * phi. *)
      let new_else_bb = insertion_block builder in

      (* Emit merge block. *)
      let merge_bb = append_block context "ifcont" the_function in
      position_at_end merge_bb builder;
      let incoming = [(then_val, new_then_bb); (else_val, new_else_bb)] in
      let phi = build_phi incoming "iftmp" builder in

      (* Return to the start block to add the conditional branch. *)
      position_at_end start_bb builder;
      ignore (build_cond_br cond_val then_bb else_bb builder);

      (* Set a unconditional branch at the end of the 'then' block and the
       * 'else' block to the 'merge' block. *)
      position_at_end new_then_bb builder; ignore (build_br merge_bb builder);
      position_at_end new_else_bb builder; ignore (build_br merge_bb builder);

      (* Finally, set the builder to the end of the merge block. *)
      position_at_end merge_bb builder;

      phi
  | Ast.For (var_name, start, end_, step, body) -&gt;
      (* Output this as:
       *   var = alloca double
       *   ...
       *   start = startexpr
       *   store start -&gt; var
       *   goto loop
       * loop:
       *   ...
       *   bodyexpr
       *   ...
       * loopend:
       *   step = stepexpr
       *   endcond = endexpr
       *
       *   curvar = load var
       *   nextvar = curvar + step
       *   store nextvar -&gt; var
       *   br endcond, loop, endloop
       * outloop: *)

      let the_function = block_parent (insertion_block builder) in

      (* Create an alloca for the variable in the entry block. *)
      let alloca = create_entry_block_alloca the_function var_name in

      (* Emit the start code first, without 'variable' in scope. *)
      let start_val = codegen_expr start in

      (* Store the value into the alloca. *)
      ignore(build_store start_val alloca builder);

      (* Make the new basic block for the loop header, inserting after current
       * block. *)
      let loop_bb = append_block context "loop" the_function in

      (* Insert an explicit fall through from the current block to the
       * loop_bb. *)
      ignore (build_br loop_bb builder);

      (* Start insertion in loop_bb. *)
      position_at_end loop_bb builder;

      (* Within the loop, the variable is defined equal to the PHI node. If it
       * shadows an existing variable, we have to restore it, so save it
       * now. *)
      let old_val =
        try Some (Hashtbl.find named_values var_name) with Not_found -&gt; None
      in
      Hashtbl.add named_values var_name alloca;

      (* Emit the body of the loop.  This, like any other expr, can change the
       * current BB.  Note that we ignore the value computed by the body, but
       * don't allow an error *)
      ignore (codegen_expr body);

      (* Emit the step value. *)
      let step_val =
        match step with
        | Some step -&gt; codegen_expr step
        (* If not specified, use 1.0. *)
        | None -&gt; const_float double_type 1.0
      in

      (* Compute the end condition. *)
      let end_cond = codegen_expr end_ in

      (* Reload, increment, and restore the alloca. This handles the case where
       * the body of the loop mutates the variable. *)
      let cur_var = build_load alloca var_name builder in
      let next_var = build_add cur_var step_val "nextvar" builder in
      ignore(build_store next_var alloca builder);

      (* Convert condition to a bool by comparing equal to 0.0. *)
      let zero = const_float double_type 0.0 in
      let end_cond = build_fcmp Fcmp.One end_cond zero "loopcond" builder in

      (* Create the "after loop" block and insert it. *)
      let after_bb = append_block context "afterloop" the_function in

      (* Insert the conditional branch into the end of loop_end_bb. *)
      ignore (build_cond_br end_cond loop_bb after_bb builder);

      (* Any new code will be inserted in after_bb. *)
      position_at_end after_bb builder;

      (* Restore the unshadowed variable. *)
      begin match old_val with
      | Some old_val -&gt; Hashtbl.add named_values var_name old_val
      | None -&gt; ()
      end;

      (* for expr always returns 0.0. *)
      const_null double_type
  | Ast.Var (var_names, body) -&gt;
      let old_bindings = ref [] in

      let the_function = block_parent (insertion_block builder) in

      (* Register all variables and emit their initializer. *)
      Array.iter (fun (var_name, init) -&gt;
        (* Emit the initializer before adding the variable to scope, this
         * prevents the initializer from referencing the variable itself, and
         * permits stuff like this:
         *   var a = 1 in
         *     var a = a in ...   # refers to outer 'a'. *)
        let init_val =
          match init with
          | Some init -&gt; codegen_expr init
          (* If not specified, use 0.0. *)
          | None -&gt; const_float double_type 0.0
        in

        let alloca = create_entry_block_alloca the_function var_name in
        ignore(build_store init_val alloca builder);

        (* Remember the old variable binding so that we can restore the binding
         * when we unrecurse. *)
        begin
          try
            let old_value = Hashtbl.find named_values var_name in
            old_bindings := (var_name, old_value) :: !old_bindings;
          with Not_found -&gt; ()
        end;

        (* Remember this binding. *)
        Hashtbl.add named_values var_name alloca;
      ) var_names;

      (* Codegen the body, now that all vars are in scope. *)
      let body_val = codegen_expr body in

      (* Pop all our variables from scope. *)
      List.iter (fun (var_name, old_value) -&gt;
        Hashtbl.add named_values var_name old_value
      ) !old_bindings;

      (* Return the body computation. *)
      body_val

let codegen_proto = function
  | Ast.Prototype (name, args) | Ast.BinOpPrototype (name, args, _) -&gt;
      (* Make the function type: double(double,double) etc. *)
      let doubles = Array.make (Array.length args) double_type in
      let ft = function_type double_type doubles in
      let f =
        match lookup_function name the_module with
        | None -&gt; declare_function name ft the_module

        (* If 'f' conflicted, there was already something named 'name'. If it
         * has a body, don't allow redefinition or reextern. *)
        | Some f -&gt;
            (* If 'f' already has a body, reject this. *)
            if block_begin f &lt;&gt; At_end f then
              raise (Error "redefinition of function");

            (* If 'f' took a different number of arguments, reject. *)
            if element_type (type_of f) &lt;&gt; ft then
              raise (Error "redefinition of function with different # args");
            f
      in

      (* Set names for all arguments. *)
      Array.iteri (fun i a -&gt;
        let n = args.(i) in
        set_value_name n a;
        Hashtbl.add named_values n a;
      ) (params f);
      f

(* Create an alloca for each argument and register the argument in the symbol
 * table so that references to it will succeed. *)
let create_argument_allocas the_function proto =
  let args = match proto with
    | Ast.Prototype (_, args) | Ast.BinOpPrototype (_, args, _) -&gt; args
  in
  Array.iteri (fun i ai -&gt;
    let var_name = args.(i) in
    (* Create an alloca for this variable. *)
    let alloca = create_entry_block_alloca the_function var_name in

    (* Store the initial value into the alloca. *)
    ignore(build_store ai alloca builder);

    (* Add arguments to variable symbol table. *)
    Hashtbl.add named_values var_name alloca;
  ) (params the_function)

let codegen_func the_fpm = function
  | Ast.Function (proto, body) -&gt;
      Hashtbl.clear named_values;
      let the_function = codegen_proto proto in

      (* If this is an operator, install it. *)
      begin match proto with
      | Ast.BinOpPrototype (name, args, prec) -&gt;
          let op = name.[String.length name - 1] in
          Hashtbl.add Parser.binop_precedence op prec;
      | _ -&gt; ()
      end;

      (* Create a new basic block to start insertion into. *)
      let bb = append_block context "entry" the_function in
      position_at_end bb builder;

      try
        (* Add all arguments to the symbol table and create their allocas. *)
        create_argument_allocas the_function proto;

        let ret_val = codegen_expr body in

        (* Finish off the function. *)
        let _ = build_ret ret_val builder in

        (* Validate the generated code, checking for consistency. *)
        Llvm_analysis.assert_valid_function the_function;

        (* Optimize the function. *)
        let _ = PassManager.run_function the_function the_fpm in

        the_function
      with e -&gt;
        delete_function the_function;
        raise e
</pre>
</dd>

<dt>toplevel.ml:</dt>
<dd class="doc_code">
<pre>
(*===----------------------------------------------------------------------===
 * Top-Level parsing and JIT Driver
 *===----------------------------------------------------------------------===*)

open Llvm
open Llvm_executionengine

(* top ::= definition | external | expression | ';' *)
let rec main_loop the_fpm the_execution_engine stream =
  match Stream.peek stream with
  | None -&gt; ()

  (* ignore top-level semicolons. *)
  | Some (Token.Kwd ';') -&gt;
      Stream.junk stream;
      main_loop the_fpm the_execution_engine stream

  | Some token -&gt;
      begin
        try match token with
        | Token.Def -&gt;
            let e = Parser.parse_definition stream in
            print_endline "parsed a function definition.";
            dump_value (Codegen.codegen_func the_fpm e);
        | Token.Extern -&gt;
            let e = Parser.parse_extern stream in
            print_endline "parsed an extern.";
            dump_value (Codegen.codegen_proto e);
        | _ -&gt;
            (* Evaluate a top-level expression into an anonymous function. *)
            let e = Parser.parse_toplevel stream in
            print_endline "parsed a top-level expr";
            let the_function = Codegen.codegen_func the_fpm e in
            dump_value the_function;

            (* JIT the function, returning a function pointer. *)
            let result = ExecutionEngine.run_function the_function [||]
              the_execution_engine in

            print_string "Evaluated to ";
            print_float (GenericValue.as_float Codegen.double_type result);
            print_newline ();
        with Stream.Error s | Codegen.Error s -&gt;
          (* Skip token for error recovery. *)
          Stream.junk stream;
          print_endline s;
      end;
      print_string "ready&gt; "; flush stdout;
      main_loop the_fpm the_execution_engine stream
</pre>
</dd>

<dt>toy.ml:</dt>
<dd class="doc_code">
<pre>
(*===----------------------------------------------------------------------===
 * Main driver code.
 *===----------------------------------------------------------------------===*)

open Llvm
open Llvm_executionengine
open Llvm_target
open Llvm_scalar_opts

let main () =
  ignore (initialize_native_target ());

  (* Install standard binary operators.
   * 1 is the lowest precedence. *)
  Hashtbl.add Parser.binop_precedence '=' 2;
  Hashtbl.add Parser.binop_precedence '&lt;' 10;
  Hashtbl.add Parser.binop_precedence '+' 20;
  Hashtbl.add Parser.binop_precedence '-' 20;
  Hashtbl.add Parser.binop_precedence '*' 40;    (* highest. *)

  (* Prime the first token. *)
  print_string "ready&gt; "; flush stdout;
  let stream = Lexer.lex (Stream.of_channel stdin) in

  (* Create the JIT. *)
  let the_execution_engine = ExecutionEngine.create Codegen.the_module in
  let the_fpm = PassManager.create_function Codegen.the_module in

  (* Set up the optimizer pipeline.  Start with registering info about how the
   * target lays out data structures. *)
  TargetData.add (ExecutionEngine.target_data the_execution_engine) the_fpm;

  (* Promote allocas to registers. *)
  add_memory_to_register_promotion the_fpm;

  (* Do simple "peephole" optimizations and bit-twiddling optzn. *)
  add_instruction_combination the_fpm;

  (* reassociate expressions. *)
  add_reassociation the_fpm;

  (* Eliminate Common SubExpressions. *)
  add_gvn the_fpm;

  (* Simplify the control flow graph (deleting unreachable blocks, etc). *)
  add_cfg_simplification the_fpm;

  ignore (PassManager.initialize the_fpm);

  (* Run the main "interpreter loop" now. *)
  Toplevel.main_loop the_fpm the_execution_engine stream;

  (* Print out all the generated code. *)
  dump_module Codegen.the_module
;;

main ()
</pre>
</dd>

<dt>bindings.c</dt>
<dd class="doc_code">
<pre>
#include &lt;stdio.h&gt;

/* putchard - putchar that takes a double and returns 0. */
extern double putchard(double X) {
  putchar((char)X);
  return 0;
}

/* printd - printf that takes a double prints it as "%f\n", returning 0. */
extern double printd(double X) {
  printf("%f\n", X);
  return 0;
}
</pre>
</dd>
</dl>

<a href="OCamlLangImpl8.html">Next: Conclusion and other useful LLVM tidbits</a>
</div>

<!-- *********************************************************************** -->
<hr>
<address>
  <a href="http://jigsaw.w3.org/css-validator/check/referer"><img
  src="http://jigsaw.w3.org/css-validator/images/vcss" alt="Valid CSS!"></a>
  <a href="http://validator.w3.org/check/referer"><img
  src="http://www.w3.org/Icons/valid-html401" alt="Valid HTML 4.01!"></a>

  <a href="mailto:sabre@nondot.org">Chris Lattner</a><br>
  <a href="http://llvm.org/">The LLVM Compiler Infrastructure</a><br>
  <a href="mailto:idadesub@users.sourceforge.net">Erick Tryzelaar</a><br>
  Last modified: $Date$
</address>
</body>
</html>