| //===-- AVRInstrInfo.td - AVR Instruction defs -------------*- tablegen -*-===// |
| // |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. |
| // See https://llvm.org/LICENSE.txt for license information. |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file describes the AVR instructions in TableGen format. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| include "AVRInstrFormats.td" |
| |
| //===----------------------------------------------------------------------===// |
| // AVR Type Profiles |
| //===----------------------------------------------------------------------===// |
| |
| def SDT_AVRCallSeqStart : SDCallSeqStart<[SDTCisVT<0, i16>, SDTCisVT<1, i16>]>; |
| def SDT_AVRCallSeqEnd : SDCallSeqEnd<[SDTCisVT<0, i16>, SDTCisVT<1, i16>]>; |
| def SDT_AVRCall : SDTypeProfile<0, -1, [SDTCisVT<0, iPTR>]>; |
| def SDT_AVRWrapper : SDTypeProfile<1, 1, [SDTCisSameAs<0, 1>, SDTCisPtrTy<0>]>; |
| def SDT_AVRBrcond : SDTypeProfile<0, 2, |
| [SDTCisVT<0, OtherVT>, SDTCisVT<1, i8>]>; |
| def SDT_AVRCmp : SDTypeProfile<0, 2, [SDTCisSameAs<0, 1>]>; |
| def SDT_AVRTst : SDTypeProfile<0, 1, [SDTCisInt<0>]>; |
| def SDT_AVRSelectCC : SDTypeProfile<1, 3, [SDTCisSameAs<0, 1>, |
| SDTCisSameAs<1, 2>, SDTCisVT<3, i8>]>; |
| |
| //===----------------------------------------------------------------------===// |
| // AVR Specific Node Definitions |
| //===----------------------------------------------------------------------===// |
| |
| def AVRretflag : SDNode<"AVRISD::RET_FLAG", SDTNone, |
| [SDNPHasChain, SDNPOptInGlue, SDNPVariadic]>; |
| def AVRretiflag : SDNode<"AVRISD::RETI_FLAG", SDTNone, |
| [SDNPHasChain, SDNPOptInGlue, SDNPVariadic]>; |
| |
| def AVRcallseq_start : SDNode<"ISD::CALLSEQ_START", SDT_AVRCallSeqStart, |
| [SDNPHasChain, SDNPOutGlue]>; |
| def AVRcallseq_end : SDNode<"ISD::CALLSEQ_END", SDT_AVRCallSeqEnd, |
| [SDNPHasChain, SDNPOptInGlue, SDNPOutGlue]>; |
| |
| def AVRcall : SDNode<"AVRISD::CALL", SDT_AVRCall, |
| [SDNPHasChain, SDNPOutGlue, SDNPOptInGlue, SDNPVariadic]>; |
| |
| def AVRWrapper : SDNode<"AVRISD::WRAPPER", SDT_AVRWrapper>; |
| |
| def AVRbrcond : SDNode<"AVRISD::BRCOND", SDT_AVRBrcond, |
| [SDNPHasChain, SDNPInGlue]>; |
| def AVRcmp : SDNode<"AVRISD::CMP", SDT_AVRCmp, [SDNPOutGlue]>; |
| def AVRcmpc : SDNode<"AVRISD::CMPC", SDT_AVRCmp, [SDNPInGlue, SDNPOutGlue]>; |
| def AVRtst : SDNode<"AVRISD::TST", SDT_AVRTst, [SDNPOutGlue]>; |
| def AVRselectcc: SDNode<"AVRISD::SELECT_CC", SDT_AVRSelectCC, [SDNPInGlue]>; |
| |
| // Shift nodes. |
| def AVRlsl : SDNode<"AVRISD::LSL", SDTIntUnaryOp>; |
| def AVRlsr : SDNode<"AVRISD::LSR", SDTIntUnaryOp>; |
| def AVRrol : SDNode<"AVRISD::ROL", SDTIntUnaryOp>; |
| def AVRror : SDNode<"AVRISD::ROR", SDTIntUnaryOp>; |
| def AVRasr : SDNode<"AVRISD::ASR", SDTIntUnaryOp>; |
| |
| // Pseudo shift nodes for non-constant shift amounts. |
| def AVRlslLoop : SDNode<"AVRISD::LSLLOOP", SDTIntShiftOp>; |
| def AVRlsrLoop : SDNode<"AVRISD::LSRLOOP", SDTIntShiftOp>; |
| def AVRrolLoop : SDNode<"AVRISD::ROLLOOP", SDTIntShiftOp>; |
| def AVRrorLoop : SDNode<"AVRISD::RORLOOP", SDTIntShiftOp>; |
| def AVRasrLoop : SDNode<"AVRISD::ASRLOOP", SDTIntShiftOp>; |
| |
| //===----------------------------------------------------------------------===// |
| // AVR Operands, Complex Patterns and Transformations Definitions. |
| //===----------------------------------------------------------------------===// |
| |
| def imm8_neg_XFORM : SDNodeXForm<imm, |
| [{ |
| return CurDAG->getTargetConstant(-N->getAPIntValue(), SDLoc(N), MVT::i8); |
| }]>; |
| |
| def imm16_neg_XFORM : SDNodeXForm<imm, |
| [{ |
| return CurDAG->getTargetConstant(-N->getAPIntValue(), SDLoc(N), MVT::i16); |
| }]>; |
| |
| def imm0_63_neg : PatLeaf<(imm), |
| [{ |
| int64_t val = -N->getSExtValue(); |
| return val >= 0 && val < 64; |
| }], imm16_neg_XFORM>; |
| |
| def uimm6 : PatLeaf<(imm), [{ return isUInt<6>(N->getZExtValue()); }]>; |
| |
| // imm_com8_XFORM - Return the complement of a imm_com8 value |
| def imm_com8_XFORM : SDNodeXForm<imm, [{ |
| return CurDAG->getTargetConstant(~((uint8_t)N->getZExtValue()), SDLoc(N), |
| MVT::i8); |
| }]>; |
| |
| // imm_com8 - Match an immediate that is a complement |
| // of a 8-bit immediate. |
| // Note: this pattern doesn't require an encoder method and such, as it's |
| // only used on aliases (Pat<> and InstAlias<>). The actual encoding |
| // is handled by the destination instructions, which use imm_com8. |
| def imm_com8_asmoperand : AsmOperandClass { let Name = "ImmCom8"; } |
| def imm_com8 : Operand<i8> { |
| let ParserMatchClass = imm_com8_asmoperand; |
| } |
| |
| def ioaddr_XFORM : SDNodeXForm<imm, |
| [{ |
| return CurDAG->getTargetConstant(uint8_t(N->getZExtValue()) - 0x20, SDLoc(N), MVT::i8); |
| }]>; |
| |
| def iobitpos8_XFORM : SDNodeXForm<imm, |
| [{ |
| return CurDAG->getTargetConstant(Log2_32(uint8_t(N->getZExtValue())), |
| SDLoc(N), MVT::i8); |
| }]>; |
| |
| def iobitposn8_XFORM : SDNodeXForm<imm, |
| [{ |
| return CurDAG->getTargetConstant(Log2_32(uint8_t(~N->getZExtValue())), |
| SDLoc(N), MVT::i8); |
| }]>; |
| |
| def ioaddr8 : PatLeaf<(imm), |
| [{ |
| uint64_t val = N->getZExtValue(); |
| return val >= 0x20 && val < 0x60; |
| }], ioaddr_XFORM>; |
| |
| def lowioaddr8 : PatLeaf<(imm), |
| [{ |
| uint64_t val = N->getZExtValue(); |
| return val >= 0x20 && val < 0x40; |
| }], ioaddr_XFORM>; |
| |
| def ioaddr16 : PatLeaf<(imm), |
| [{ |
| uint64_t val = N->getZExtValue(); |
| return val >= 0x20 && val < 0x5f; |
| }], ioaddr_XFORM>; |
| |
| def iobitpos8 : PatLeaf<(imm), |
| [{ |
| return isPowerOf2_32(uint8_t(N->getZExtValue())); |
| }], iobitpos8_XFORM>; |
| |
| def iobitposn8 : PatLeaf<(imm), |
| [{ |
| return isPowerOf2_32(uint8_t(~N->getZExtValue())); |
| }], iobitposn8_XFORM>; |
| |
| def MemriAsmOperand : AsmOperandClass { |
| let Name = "Memri"; |
| let ParserMethod = "parseMemriOperand"; |
| } |
| |
| /// Address operand for `reg+imm` used by STD and LDD. |
| def memri : Operand<iPTR> |
| { |
| let MIOperandInfo = (ops PTRDISPREGS, i16imm); |
| |
| let PrintMethod = "printMemri"; |
| let EncoderMethod = "encodeMemri"; |
| |
| let ParserMatchClass = MemriAsmOperand; |
| } |
| |
| // Address operand for `SP+imm` used by STD{W}SPQRr |
| def memspi : Operand<iPTR> |
| { |
| let MIOperandInfo = (ops GPRSP, i16imm); |
| } |
| |
| def relbrtarget_7 : Operand<OtherVT> |
| { |
| let PrintMethod = "printPCRelImm"; |
| let EncoderMethod = "encodeRelCondBrTarget<AVR::fixup_7_pcrel>"; |
| } |
| |
| def brtarget_13 : Operand<OtherVT> |
| { |
| let PrintMethod = "printPCRelImm"; |
| let EncoderMethod = "encodeRelCondBrTarget<AVR::fixup_13_pcrel>"; |
| } |
| |
| // The target of a 22 or 16-bit call/jmp instruction. |
| def call_target : Operand<iPTR> |
| { |
| let EncoderMethod = "encodeCallTarget"; |
| } |
| |
| // A 16-bit address (which can lead to an R_AVR_16 relocation). |
| def imm16 : Operand<i16> |
| { |
| let EncoderMethod = "encodeImm<AVR::fixup_16, 2>"; |
| } |
| |
| /// A 6-bit immediate used in the ADIW/SBIW instructions. |
| def imm_arith6 : Operand<i16> |
| { |
| let EncoderMethod = "encodeImm<AVR::fixup_6_adiw, 0>"; |
| } |
| |
| /// An 8-bit immediate inside an instruction with the same format |
| /// as the `LDI` instruction (the `FRdK` format). |
| def imm_ldi8 : Operand<i8> |
| { |
| let EncoderMethod = "encodeImm<AVR::fixup_ldi, 0>"; |
| } |
| |
| /// A 5-bit port number used in SBIC and friends (the `FIOBIT` format). |
| def imm_port5 : Operand<i8> |
| { |
| let EncoderMethod = "encodeImm<AVR::fixup_port5, 0>"; |
| } |
| |
| /// A 6-bit port number used in the `IN` instruction and friends (the |
| /// `FIORdA` format. |
| def imm_port6 : Operand<i8> |
| { |
| let EncoderMethod = "encodeImm<AVR::fixup_port6, 0>"; |
| } |
| |
| // Addressing mode pattern reg+imm6 |
| def addr : ComplexPattern<iPTR, 2, "SelectAddr", [], [SDNPWantRoot]>; |
| |
| // AsmOperand class for a pointer register. |
| // Used with the LD/ST family of instructions. |
| // See FSTLD in AVRInstrFormats.td |
| def PtrRegAsmOperand : AsmOperandClass |
| { |
| let Name = "Reg"; |
| } |
| |
| // A special operand type for the LD/ST instructions. |
| // It converts the pointer register number into a two-bit field used in the |
| // instruction. |
| def LDSTPtrReg : Operand<i16> |
| { |
| let MIOperandInfo = (ops PTRREGS); |
| let EncoderMethod = "encodeLDSTPtrReg"; |
| |
| let ParserMatchClass = PtrRegAsmOperand; |
| } |
| |
| // A special operand type for the LDD/STD instructions. |
| // It behaves identically to the LD/ST version, except restricts |
| // the pointer registers to Y and Z. |
| def LDDSTDPtrReg : Operand<i16> |
| { |
| let MIOperandInfo = (ops PTRDISPREGS); |
| let EncoderMethod = "encodeLDSTPtrReg"; |
| |
| let ParserMatchClass = PtrRegAsmOperand; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // AVR predicates for subtarget features |
| //===----------------------------------------------------------------------===// |
| |
| def HasSRAM : Predicate<"Subtarget->hasSRAM()">, |
| AssemblerPredicate<"FeatureSRAM">; |
| |
| def HasJMPCALL : Predicate<"Subtarget->hasJMPCALL()">, |
| AssemblerPredicate<"FeatureJMPCALL">; |
| |
| def HasIJMPCALL : Predicate<"Subtarget->hasIJMPCALL()">, |
| AssemblerPredicate<"FeatureIJMPCALL">; |
| |
| def HasEIJMPCALL : Predicate<"Subtarget->hasEIJMPCALL()">, |
| AssemblerPredicate<"FeatureEIJMPCALL">; |
| |
| def HasADDSUBIW : Predicate<"Subtarget->hasADDSUBIW()">, |
| AssemblerPredicate<"FeatureADDSUBIW">; |
| |
| def HasSmallStack : Predicate<"Subtarget->HasSmallStack()">, |
| AssemblerPredicate<"FeatureSmallStack">; |
| |
| def HasMOVW : Predicate<"Subtarget->hasMOVW()">, |
| AssemblerPredicate<"FeatureMOVW">; |
| |
| def HasLPM : Predicate<"Subtarget->hasLPM()">, |
| AssemblerPredicate<"FeatureLPM">; |
| |
| def HasLPMX : Predicate<"Subtarget->hasLPMX()">, |
| AssemblerPredicate<"FeatureLPMX">; |
| |
| def HasELPM : Predicate<"Subtarget->hasELPM()">, |
| AssemblerPredicate<"FeatureELPM">; |
| |
| def HasELPMX : Predicate<"Subtarget->hasELPMX()">, |
| AssemblerPredicate<"FeatureELPMX">; |
| |
| def HasSPM : Predicate<"Subtarget->hasSPM()">, |
| AssemblerPredicate<"FeatureSPM">; |
| |
| def HasSPMX : Predicate<"Subtarget->hasSPMX()">, |
| AssemblerPredicate<"FeatureSPMX">; |
| |
| def HasDES : Predicate<"Subtarget->hasDES()">, |
| AssemblerPredicate<"FeatureDES">; |
| |
| def SupportsRMW : Predicate<"Subtarget->supportsRMW()">, |
| AssemblerPredicate<"FeatureRMW">; |
| |
| def SupportsMultiplication : Predicate<"Subtarget->supportsMultiplication()">, |
| AssemblerPredicate<"FeatureMultiplication">; |
| |
| def HasBREAK : Predicate<"Subtarget->hasBREAK()">, |
| AssemblerPredicate<"FeatureBREAK">; |
| |
| def HasTinyEncoding : Predicate<"Subtarget->hasTinyEncoding()">, |
| AssemblerPredicate<"FeatureTinyEncoding">; |
| |
| |
| // AVR specific condition code. These correspond to AVR_*_COND in |
| // AVRInstrInfo.td. They must be kept in synch. |
| def AVR_COND_EQ : PatLeaf<(i8 0)>; |
| def AVR_COND_NE : PatLeaf<(i8 1)>; |
| def AVR_COND_GE : PatLeaf<(i8 2)>; |
| def AVR_COND_LT : PatLeaf<(i8 3)>; |
| def AVR_COND_SH : PatLeaf<(i8 4)>; |
| def AVR_COND_LO : PatLeaf<(i8 5)>; |
| def AVR_COND_MI : PatLeaf<(i8 6)>; |
| def AVR_COND_PL : PatLeaf<(i8 7)>; |
| |
| |
| //===----------------------------------------------------------------------===// |
| //===----------------------------------------------------------------------===// |
| // AVR Instruction list |
| //===----------------------------------------------------------------------===// |
| //===----------------------------------------------------------------------===// |
| |
| // ADJCALLSTACKDOWN/UP implicitly use/def SP because they may be expanded into |
| // a stack adjustment and the codegen must know that they may modify the stack |
| // pointer before prolog-epilog rewriting occurs. |
| // Pessimistically assume ADJCALLSTACKDOWN / ADJCALLSTACKUP will become |
| // sub / add which can clobber SREG. |
| let Defs = [SP, SREG], |
| Uses = [SP] in |
| { |
| def ADJCALLSTACKDOWN : Pseudo<(outs), |
| (ins i16imm:$amt, i16imm:$amt2), |
| "#ADJCALLSTACKDOWN", |
| [(AVRcallseq_start timm:$amt, timm:$amt2)]>; |
| |
| // R31R30 is used to update SP, since it is a scratch reg and this instruction |
| // is placed after the function call then R31R30 should be always free. |
| //let Defs = [R31R30], |
| //Uses = [R31R30] in |
| //:TODO: if we enable this, the pseudo is killed because it looks dead |
| def ADJCALLSTACKUP : Pseudo<(outs), |
| (ins i16imm:$amt1, i16imm:$amt2), |
| "#ADJCALLSTACKUP", |
| [(AVRcallseq_end timm:$amt1, timm:$amt2)]>; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Addition |
| //===----------------------------------------------------------------------===// |
| let isCommutable = 1, |
| Constraints = "$src = $rd", |
| Defs = [SREG] in |
| { |
| // ADD Rd, Rr |
| // Adds two 8-bit registers. |
| def ADDRdRr : FRdRr<0b0000, |
| 0b11, |
| (outs GPR8:$rd), |
| (ins GPR8:$src, GPR8:$rr), |
| "add\t$rd, $rr", |
| [(set i8:$rd, (add i8:$src, i8:$rr)), |
| (implicit SREG)]>; |
| |
| // ADDW Rd+1:Rd, Rr+1:Rr |
| // Pseudo instruction to add four 8-bit registers as two 16-bit values. |
| // |
| // Expands to: |
| // add Rd, Rr |
| // adc Rd+1, Rr+1 |
| def ADDWRdRr : Pseudo<(outs DREGS:$rd), |
| (ins DREGS:$src, DREGS:$rr), |
| "addw\t$rd, $rr", |
| [(set i16:$rd, (add i16:$src, i16:$rr)), |
| (implicit SREG)]>; |
| |
| // ADC Rd, Rr |
| // Adds two 8-bit registers with carry. |
| let Uses = [SREG] in |
| def ADCRdRr : FRdRr<0b0001, |
| 0b11, |
| (outs GPR8:$rd), |
| (ins GPR8:$src, GPR8:$rr), |
| "adc\t$rd, $rr", |
| [(set i8:$rd, (adde i8:$src, i8:$rr)), |
| (implicit SREG)]>; |
| |
| // ADCW Rd+1:Rd, Rr+1:Rr |
| // Pseudo instruction to add four 8-bit registers as two 16-bit values with |
| // carry. |
| // |
| // Expands to: |
| // adc Rd, Rr |
| // adc Rd+1, Rr+1 |
| let Uses = [SREG] in |
| def ADCWRdRr : Pseudo<(outs DREGS:$rd), |
| (ins DREGS:$src, DREGS:$rr), |
| "adcw\t$rd, $rr", |
| [(set i16:$rd, (adde i16:$src, i16:$rr)), |
| (implicit SREG)]>; |
| |
| // AIDW Rd, k |
| // Adds an immediate 6-bit value K to Rd, placing the result in Rd. |
| def ADIWRdK : FWRdK<0b0, |
| (outs IWREGS:$rd), |
| (ins IWREGS:$src, imm_arith6:$k), |
| "adiw\t$rd, $k", |
| [(set i16:$rd, (add i16:$src, uimm6:$k)), |
| (implicit SREG)]>, |
| Requires<[HasADDSUBIW]>; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Subtraction |
| //===----------------------------------------------------------------------===// |
| let Constraints = "$src = $rd", |
| Defs = [SREG] in |
| { |
| // SUB Rd, Rr |
| // Subtracts the 8-bit value of Rr from Rd and places the value in Rd. |
| def SUBRdRr : FRdRr<0b0001, |
| 0b10, |
| (outs GPR8:$rd), |
| (ins GPR8:$src, GPR8:$rr), |
| "sub\t$rd, $rr", |
| [(set i8:$rd, (sub i8:$src, i8:$rr)), |
| (implicit SREG)]>; |
| |
| // SUBW Rd+1:Rd, Rr+1:Rr |
| // Subtracts two 16-bit values and places the result into Rd. |
| // |
| // Expands to: |
| // sub Rd, Rr |
| // sbc Rd+1, Rr+1 |
| def SUBWRdRr : Pseudo<(outs DREGS:$rd), |
| (ins DREGS:$src, DREGS:$rr), |
| "subw\t$rd, $rr", |
| [(set i16:$rd, (sub i16:$src, i16:$rr)), |
| (implicit SREG)]>; |
| |
| def SUBIRdK : FRdK<0b0101, |
| (outs LD8:$rd), |
| (ins LD8:$src, imm_ldi8:$k), |
| "subi\t$rd, $k", |
| [(set i8:$rd, (sub i8:$src, imm:$k)), |
| (implicit SREG)]>; |
| |
| // SUBIW Rd+1:Rd, K+1:K |
| // |
| // Expands to: |
| // subi Rd, K |
| // sbci Rd+1, K+1 |
| def SUBIWRdK : Pseudo<(outs DLDREGS:$rd), |
| (ins DLDREGS:$src, i16imm:$rr), |
| "subiw\t$rd, $rr", |
| [(set i16:$rd, (sub i16:$src, imm:$rr)), |
| (implicit SREG)]>; |
| |
| def SBIWRdK : FWRdK<0b1, |
| (outs IWREGS:$rd), |
| (ins IWREGS:$src, imm_arith6:$k), |
| "sbiw\t$rd, $k", |
| [(set i16:$rd, (sub i16:$src, uimm6:$k)), |
| (implicit SREG)]>, |
| Requires<[HasADDSUBIW]>; |
| |
| // Subtract with carry operations which must read the carry flag in SREG. |
| let Uses = [SREG] in |
| { |
| def SBCRdRr : FRdRr<0b0000, |
| 0b10, |
| (outs GPR8:$rd), |
| (ins GPR8:$src, GPR8:$rr), |
| "sbc\t$rd, $rr", |
| [(set i8:$rd, (sube i8:$src, i8:$rr)), |
| (implicit SREG)]>; |
| |
| // SBCW Rd+1:Rd, Rr+1:Rr |
| // |
| // Expands to: |
| // sbc Rd, Rr |
| // sbc Rd+1, Rr+1 |
| def SBCWRdRr : Pseudo<(outs DREGS:$rd), |
| (ins DREGS:$src, DREGS:$rr), |
| "sbcw\t$rd, $rr", |
| [(set i16:$rd, (sube i16:$src, i16:$rr)), |
| (implicit SREG)]>; |
| |
| def SBCIRdK : FRdK<0b0100, |
| (outs LD8:$rd), |
| (ins LD8:$src, imm_ldi8:$k), |
| "sbci\t$rd, $k", |
| [(set i8:$rd, (sube i8:$src, imm:$k)), |
| (implicit SREG)]>; |
| |
| // SBCIW Rd+1:Rd, K+1:K |
| // sbci Rd, K |
| // sbci Rd+1, K+1 |
| def SBCIWRdK : Pseudo<(outs DLDREGS:$rd), |
| (ins DLDREGS:$src, i16imm:$rr), |
| "sbciw\t$rd, $rr", |
| [(set i16:$rd, (sube i16:$src, imm:$rr)), |
| (implicit SREG)]>; |
| } |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Increment and Decrement |
| //===----------------------------------------------------------------------===// |
| let Constraints = "$src = $rd", |
| Defs = [SREG] in |
| { |
| def INCRd : FRd<0b1001, |
| 0b0100011, |
| (outs GPR8:$rd), |
| (ins GPR8:$src), |
| "inc\t$rd", |
| [(set i8:$rd, (add i8:$src, 1)), (implicit SREG)]>; |
| |
| def DECRd : FRd<0b1001, |
| 0b0101010, |
| (outs GPR8:$rd), |
| (ins GPR8:$src), |
| "dec\t$rd", |
| [(set i8:$rd, (add i8:$src, -1)), (implicit SREG)]>; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Multiplication |
| //===----------------------------------------------------------------------===// |
| |
| let isCommutable = 1, |
| Defs = [R1, R0, SREG] in |
| { |
| // MUL Rd, Rr |
| // Multiplies Rd by Rr and places the result into R1:R0. |
| let usesCustomInserter = 1 in { |
| def MULRdRr : FRdRr<0b1001, 0b11, |
| (outs), |
| (ins GPR8:$lhs, GPR8:$rhs), |
| "mul\t$lhs, $rhs", |
| [/*(set R1, R0, (smullohi i8:$lhs, i8:$rhs))*/]>, |
| Requires<[SupportsMultiplication]>; |
| |
| def MULSRdRr : FMUL2RdRr<0, |
| (outs), |
| (ins GPR8:$lhs, GPR8:$rhs), |
| "muls\t$lhs, $rhs", |
| []>, |
| Requires<[SupportsMultiplication]>; |
| } |
| |
| def MULSURdRr : FMUL2RdRr<1, |
| (outs), |
| (ins GPR8:$lhs, GPR8:$rhs), |
| "mulsu\t$lhs, $rhs", |
| []>, |
| Requires<[SupportsMultiplication]>; |
| |
| def FMUL : FFMULRdRr<0b01, |
| (outs), |
| (ins GPR8:$lhs, GPR8:$rhs), |
| "fmul\t$lhs, $rhs", |
| []>, |
| Requires<[SupportsMultiplication]>; |
| |
| def FMULS : FFMULRdRr<0b10, |
| (outs), |
| (ins GPR8:$lhs, GPR8:$rhs), |
| "fmuls\t$lhs, $rhs", |
| []>, |
| Requires<[SupportsMultiplication]>; |
| |
| def FMULSU : FFMULRdRr<0b11, |
| (outs), |
| (ins GPR8:$lhs, GPR8:$rhs), |
| "fmulsu\t$lhs, $rhs", |
| []>, |
| Requires<[SupportsMultiplication]>; |
| } |
| |
| let Defs = [R15, R14, R13, R12, R11, R10, R9, |
| R8, R7, R6, R5, R4, R3, R2, R1, R0] in |
| def DESK : FDES<(outs), |
| (ins i8imm:$k), |
| "des\t$k", |
| []>, |
| Requires<[HasDES]>; |
| |
| //===----------------------------------------------------------------------===// |
| // Logic |
| //===----------------------------------------------------------------------===// |
| let Constraints = "$src = $rd", |
| Defs = [SREG] in |
| { |
| // Register-Register logic instructions (which have the |
| // property of commutativity). |
| let isCommutable = 1 in |
| { |
| def ANDRdRr : FRdRr<0b0010, |
| 0b00, |
| (outs GPR8:$rd), |
| (ins GPR8:$src, GPR8:$rr), |
| "and\t$rd, $rr", |
| [(set i8:$rd, (and i8:$src, i8:$rr)), |
| (implicit SREG)]>; |
| |
| // ANDW Rd+1:Rd, Rr+1:Rr |
| // |
| // Expands to: |
| // and Rd, Rr |
| // and Rd+1, Rr+1 |
| def ANDWRdRr : Pseudo<(outs DREGS:$rd), |
| (ins DREGS:$src, DREGS:$rr), |
| "andw\t$rd, $rr", |
| [(set i16:$rd, (and i16:$src, i16:$rr)), |
| (implicit SREG)]>; |
| |
| def ORRdRr : FRdRr<0b0010, |
| 0b10, |
| (outs GPR8:$rd), |
| (ins GPR8:$src, GPR8:$rr), |
| "or\t$rd, $rr", |
| [(set i8:$rd, (or i8:$src, i8:$rr)), |
| (implicit SREG)]>; |
| |
| // ORW Rd+1:Rd, Rr+1:Rr |
| // |
| // Expands to: |
| // or Rd, Rr |
| // or Rd+1, Rr+1 |
| def ORWRdRr : Pseudo<(outs DREGS:$rd), |
| (ins DREGS:$src, DREGS:$rr), |
| "orw\t$rd, $rr", |
| [(set i16:$rd, (or i16:$src, i16:$rr)), |
| (implicit SREG)]>; |
| |
| def EORRdRr : FRdRr<0b0010, |
| 0b01, |
| (outs GPR8:$rd), |
| (ins GPR8:$src, GPR8:$rr), |
| "eor\t$rd, $rr", |
| [(set i8:$rd, (xor i8:$src, i8:$rr)), |
| (implicit SREG)]>; |
| |
| // EORW Rd+1:Rd, Rr+1:Rr |
| // |
| // Expands to: |
| // eor Rd, Rr |
| // eor Rd+1, Rr+1 |
| def EORWRdRr : Pseudo<(outs DREGS:$rd), |
| (ins DREGS:$src, DREGS:$rr), |
| "eorw\t$rd, $rr", |
| [(set i16:$rd, (xor i16:$src, i16:$rr)), |
| (implicit SREG)]>; |
| } |
| |
| def ANDIRdK : FRdK<0b0111, |
| (outs LD8:$rd), |
| (ins LD8:$src, imm_ldi8:$k), |
| "andi\t$rd, $k", |
| [(set i8:$rd, (and i8:$src, imm:$k)), |
| (implicit SREG)]>; |
| |
| // ANDI Rd+1:Rd, K+1:K |
| // |
| // Expands to: |
| // andi Rd, K |
| // andi Rd+1, K+1 |
| def ANDIWRdK : Pseudo<(outs DLDREGS:$rd), |
| (ins DLDREGS:$src, i16imm:$k), |
| "andiw\t$rd, $k", |
| [(set i16:$rd, (and i16:$src, imm:$k)), |
| (implicit SREG)]>; |
| |
| def ORIRdK : FRdK<0b0110, |
| (outs LD8:$rd), |
| (ins LD8:$src, imm_ldi8:$k), |
| "ori\t$rd, $k", |
| [(set i8:$rd, (or i8:$src, imm:$k)), |
| (implicit SREG)]>; |
| |
| // ORIW Rd+1:Rd, K+1,K |
| // |
| // Expands to: |
| // ori Rd, K |
| // ori Rd+1, K+1 |
| def ORIWRdK : Pseudo<(outs DLDREGS:$rd), |
| (ins DLDREGS:$src, i16imm:$rr), |
| "oriw\t$rd, $rr", |
| [(set i16:$rd, (or i16:$src, imm:$rr)), |
| (implicit SREG)]>; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // One's/Two's Complement |
| //===----------------------------------------------------------------------===// |
| let Constraints = "$src = $rd", |
| Defs = [SREG] in |
| { |
| def COMRd : FRd<0b1001, |
| 0b0100000, |
| (outs GPR8:$rd), |
| (ins GPR8:$src), |
| "com\t$rd", |
| [(set i8:$rd, (not i8:$src)), (implicit SREG)]>; |
| |
| // COMW Rd+1:Rd |
| // |
| // Expands to: |
| // com Rd |
| // com Rd+1 |
| def COMWRd : Pseudo<(outs DREGS:$rd), |
| (ins DREGS:$src), |
| "comw\t$rd", |
| [(set i16:$rd, (not i16:$src)), (implicit SREG)]>; |
| |
| //:TODO: optimize NEG for wider types |
| def NEGRd : FRd<0b1001, |
| 0b0100001, |
| (outs GPR8:$rd), |
| (ins GPR8:$src), |
| "neg\t$rd", |
| [(set i8:$rd, (ineg i8:$src)), (implicit SREG)]>; |
| } |
| |
| // TST Rd |
| // Test for zero of minus. |
| // This operation is identical to a `Rd AND Rd`. |
| def : InstAlias<"tst\t$rd", (ANDRdRr GPR8:$rd, GPR8:$rd)>; |
| |
| // SBR Rd, K |
| // |
| // Mnemonic alias to 'ORI Rd, K'. Same bit pattern, same operands, |
| // same everything. |
| def : InstAlias<"sbr\t$rd, $k", |
| (ORIRdK LD8:$rd, imm_ldi8:$k), |
| /* Disable display, so we don't override ORI */ 0>; |
| |
| //===----------------------------------------------------------------------===// |
| // Jump instructions |
| //===----------------------------------------------------------------------===// |
| let isBarrier = 1, |
| isBranch = 1, |
| isTerminator = 1 in |
| { |
| def RJMPk : FBRk<0, |
| (outs), |
| (ins brtarget_13:$target), |
| "rjmp\t$target", |
| [(br bb:$target)]>; |
| |
| let isIndirectBranch = 1, |
| Uses = [R31R30] in |
| def IJMP : F16<0b1001010000001001, |
| (outs), |
| (ins), |
| "ijmp", |
| []>, |
| Requires<[HasIJMPCALL]>; |
| |
| let isIndirectBranch = 1, |
| Uses = [R31R30] in |
| def EIJMP : F16<0b1001010000011001, |
| (outs), |
| (ins), |
| "eijmp", |
| []>, |
| Requires<[HasEIJMPCALL]>; |
| |
| def JMPk : F32BRk<0b110, |
| (outs), |
| (ins call_target:$k), |
| "jmp\t$k", |
| []>, |
| Requires<[HasJMPCALL]>; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Call instructions |
| //===----------------------------------------------------------------------===// |
| let isCall = 1 in |
| { |
| // SP is marked as a use to prevent stack-pointer assignments that appear |
| // immediately before calls from potentially appearing dead. |
| let Uses = [SP] in |
| def RCALLk : FBRk<1, |
| (outs), |
| (ins brtarget_13:$target), |
| "rcall\t$target", |
| []>; |
| |
| // SP is marked as a use to prevent stack-pointer assignments that appear |
| // immediately before calls from potentially appearing dead. |
| let Uses = [SP, R31R30] in |
| def ICALL : F16<0b1001010100001001, |
| (outs), |
| (ins variable_ops), |
| "icall", |
| []>, |
| Requires<[HasIJMPCALL]>; |
| |
| // SP is marked as a use to prevent stack-pointer assignments that appear |
| // immediately before calls from potentially appearing dead. |
| let Uses = [SP, R31R30] in |
| def EICALL : F16<0b1001010100011001, |
| (outs), |
| (ins variable_ops), |
| "eicall", |
| []>, |
| Requires<[HasEIJMPCALL]>; |
| |
| // SP is marked as a use to prevent stack-pointer assignments that appear |
| // immediately before calls from potentially appearing dead. |
| // |
| //:TODO: the imm field can be either 16 or 22 bits in devices with more |
| // than 64k of ROM, fix it once we support the largest devices. |
| let Uses = [SP] in |
| def CALLk : F32BRk<0b111, |
| (outs), |
| (ins call_target:$k), |
| "call\t$k", |
| [(AVRcall imm:$k)]>, |
| Requires<[HasJMPCALL]>; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Return instructions. |
| //===----------------------------------------------------------------------===// |
| let isTerminator = 1, |
| isReturn = 1, |
| isBarrier = 1 in |
| { |
| def RET : F16<0b1001010100001000, |
| (outs), |
| (ins), |
| "ret", |
| [(AVRretflag)]>; |
| |
| def RETI : F16<0b1001010100011000, |
| (outs), |
| (ins), |
| "reti", |
| [(AVRretiflag)]>; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Compare operations. |
| //===----------------------------------------------------------------------===// |
| let Defs = [SREG] in |
| { |
| // CPSE Rd, Rr |
| // Compare Rd and Rr, skipping the next instruction if they are equal. |
| let isBarrier = 1, |
| isBranch = 1, |
| isTerminator = 1 in |
| def CPSE : FRdRr<0b0001, |
| 0b00, |
| (outs), |
| (ins GPR8:$rd, GPR8:$rr), |
| "cpse\t$rd, $rr", |
| []>; |
| |
| def CPRdRr : FRdRr<0b0001, |
| 0b01, |
| (outs), |
| (ins GPR8:$rd, GPR8:$rr), |
| "cp\t$rd, $rr", |
| [(AVRcmp i8:$rd, i8:$rr), (implicit SREG)]>; |
| |
| // CPW Rd+1:Rd, Rr+1:Rr |
| // |
| // Expands to: |
| // cp Rd, Rr |
| // cpc Rd+1, Rr+1 |
| def CPWRdRr : Pseudo<(outs), |
| (ins DREGS:$src, DREGS:$src2), |
| "cpw\t$src, $src2", |
| [(AVRcmp i16:$src, i16:$src2), (implicit SREG)]>; |
| |
| let Uses = [SREG] in |
| def CPCRdRr : FRdRr<0b0000, |
| 0b01, |
| (outs), |
| (ins GPR8:$rd, GPR8:$rr), |
| "cpc\t$rd, $rr", |
| [(AVRcmpc i8:$rd, i8:$rr), (implicit SREG)]>; |
| |
| // CPCW Rd+1:Rd. Rr+1:Rr |
| // |
| // Expands to: |
| // cpc Rd, Rr |
| // cpc Rd+1, Rr+1 |
| let Uses = [SREG] in |
| def CPCWRdRr : Pseudo<(outs), |
| (ins DREGS:$src, DREGS:$src2), |
| "cpcw\t$src, $src2", |
| [(AVRcmpc i16:$src, i16:$src2), (implicit SREG)]>; |
| |
| // CPI Rd, K |
| // Compares a register with an 8 bit immediate. |
| def CPIRdK : FRdK<0b0011, |
| (outs), |
| (ins LD8:$rd, imm_ldi8:$k), |
| "cpi\t$rd, $k", |
| [(AVRcmp i8:$rd, imm:$k), (implicit SREG)]>; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Register conditional skipping/branching operations. |
| //===----------------------------------------------------------------------===// |
| let isBranch = 1, |
| isTerminator = 1 in |
| { |
| // Conditional skipping on GPR register bits, and |
| // conditional skipping on IO register bits. |
| let isBarrier = 1 in |
| { |
| def SBRCRrB : FRdB<0b10, |
| (outs), |
| (ins GPR8:$rr, i8imm:$b), |
| "sbrc\t$rr, $b", |
| []>; |
| |
| def SBRSRrB : FRdB<0b11, |
| (outs), |
| (ins GPR8:$rr, i8imm:$b), |
| "sbrs\t$rr, $b", |
| []>; |
| |
| def SBICAb : FIOBIT<0b01, |
| (outs), |
| (ins imm_port5:$a, i8imm:$b), |
| "sbic\t$a, $b", |
| []>; |
| |
| def SBISAb : FIOBIT<0b11, |
| (outs), |
| (ins imm_port5:$a, i8imm:$b), |
| "sbis\t$a, $b", |
| []>; |
| } |
| |
| // Relative branches on status flag bits. |
| let Uses = [SREG] in |
| { |
| // BRBS s, k |
| // Branch if `s` flag in status register is set. |
| def BRBSsk : FSK<0, |
| (outs), |
| (ins i8imm:$s, relbrtarget_7:$k), |
| "brbs\t$s, $k", |
| []>; |
| |
| // BRBC s, k |
| // Branch if `s` flag in status register is clear. |
| def BRBCsk : FSK<1, |
| (outs), |
| (ins i8imm:$s, relbrtarget_7:$k), |
| "brbc\t$s, $k", |
| []>; |
| } |
| } |
| |
| |
| // BRCS k |
| // Branch if carry flag is set |
| def : InstAlias<"brcs\t$k", (BRBSsk 0, relbrtarget_7:$k)>; |
| |
| // BRCC k |
| // Branch if carry flag is clear |
| def : InstAlias<"brcc\t$k", (BRBCsk 0, relbrtarget_7:$k)>; |
| |
| // BRHS k |
| // Branch if half carry flag is set |
| def : InstAlias<"brhs\t$k", (BRBSsk 5, relbrtarget_7:$k)>; |
| |
| // BRHC k |
| // Branch if half carry flag is clear |
| def : InstAlias<"brhc\t$k", (BRBCsk 5, relbrtarget_7:$k)>; |
| |
| // BRTS k |
| // Branch if the T flag is set |
| def : InstAlias<"brts\t$k", (BRBSsk 6, relbrtarget_7:$k)>; |
| |
| // BRTC k |
| // Branch if the T flag is clear |
| def : InstAlias<"brtc\t$k", (BRBCsk 6, relbrtarget_7:$k)>; |
| |
| // BRVS k |
| // Branch if the overflow flag is set |
| def : InstAlias<"brvs\t$k", (BRBSsk 3, relbrtarget_7:$k)>; |
| |
| // BRVC k |
| // Branch if the overflow flag is clear |
| def : InstAlias<"brvc\t$k", (BRBCsk 3, relbrtarget_7:$k)>; |
| |
| // BRIE k |
| // Branch if the global interrupt flag is enabled |
| def : InstAlias<"brie\t$k", (BRBSsk 7, relbrtarget_7:$k)>; |
| |
| // BRID k |
| // Branch if the global interrupt flag is disabled |
| def : InstAlias<"brid\t$k", (BRBCsk 7, relbrtarget_7:$k)>; |
| |
| //===----------------------------------------------------------------------===// |
| // PC-relative conditional branches |
| //===----------------------------------------------------------------------===// |
| // Based on status register. We cannot simplify these into instruction aliases |
| // because we also need to be able to specify a pattern to match for ISel. |
| let isBranch = 1, |
| isTerminator = 1, |
| Uses = [SREG] in |
| { |
| def BREQk : FBRsk<0, |
| 0b001, |
| (outs), |
| (ins relbrtarget_7:$target), |
| "breq\t$target", |
| [(AVRbrcond bb:$target, AVR_COND_EQ)]>; |
| |
| def BRNEk : FBRsk<1, |
| 0b001, |
| (outs), |
| (ins relbrtarget_7:$target), |
| "brne\t$target", |
| [(AVRbrcond bb:$target, AVR_COND_NE)]>; |
| |
| |
| def BRSHk : FBRsk<1, |
| 0b000, |
| (outs), |
| (ins relbrtarget_7:$target), |
| "brsh\t$target", |
| [(AVRbrcond bb:$target, AVR_COND_SH)]>; |
| |
| def BRLOk : FBRsk<0, |
| 0b000, |
| (outs), |
| (ins relbrtarget_7:$target), |
| "brlo\t$target", |
| [(AVRbrcond bb:$target, AVR_COND_LO)]>; |
| |
| def BRMIk : FBRsk<0, |
| 0b010, |
| (outs), |
| (ins relbrtarget_7:$target), |
| "brmi\t$target", |
| [(AVRbrcond bb:$target, AVR_COND_MI)]>; |
| |
| def BRPLk : FBRsk<1, |
| 0b010, |
| (outs), |
| (ins relbrtarget_7:$target), |
| "brpl\t$target", |
| [(AVRbrcond bb:$target, AVR_COND_PL)]>; |
| |
| def BRGEk : FBRsk<1, |
| 0b100, |
| (outs), |
| (ins relbrtarget_7:$target), |
| "brge\t$target", |
| [(AVRbrcond bb:$target, AVR_COND_GE)]>; |
| |
| def BRLTk : FBRsk<0, |
| 0b100, |
| (outs), |
| (ins relbrtarget_7:$target), |
| "brlt\t$target", |
| [(AVRbrcond bb:$target, AVR_COND_LT)]>; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Data transfer instructions |
| //===----------------------------------------------------------------------===// |
| // 8 and 16-bit register move instructions. |
| let hasSideEffects = 0 in |
| { |
| def MOVRdRr : FRdRr<0b0010, |
| 0b11, |
| (outs GPR8:$rd), |
| (ins GPR8:$rr), |
| "mov\t$rd, $rr", |
| []>; |
| |
| def MOVWRdRr : FMOVWRdRr<(outs DREGS:$dst), |
| (ins DREGS:$src), |
| "movw\t$dst, $src", |
| []>, |
| Requires<[HasMOVW]>; |
| } |
| |
| // Load immediate values into registers. |
| let isReMaterializable = 1 in |
| { |
| def LDIRdK : FRdK<0b1110, |
| (outs LD8:$rd), |
| (ins imm_ldi8:$k), |
| "ldi\t$rd, $k", |
| [(set i8:$rd, imm:$k)]>; |
| |
| // LDIW Rd+1:Rd, K+1:K |
| // |
| // Expands to: |
| // ldi Rd, K |
| // ldi Rd+1, K+1 |
| def LDIWRdK : Pseudo<(outs DLDREGS:$dst), |
| (ins i16imm:$src), |
| "ldiw\t$dst, $src", |
| [(set i16:$dst, imm:$src)]>; |
| } |
| |
| // Load from data space into register. |
| let canFoldAsLoad = 1, |
| isReMaterializable = 1 in |
| { |
| def LDSRdK : F32DM<0b0, |
| (outs GPR8:$rd), |
| (ins imm16:$k), |
| "lds\t$rd, $k", |
| [(set i8:$rd, (load imm:$k))]>, |
| Requires<[HasSRAM]>; |
| |
| // LDSW Rd+1:Rd, K+1:K |
| // |
| // Expands to: |
| // lds Rd, (K+1:K) |
| // lds Rd+1 (K+1:K) + 1 |
| def LDSWRdK : Pseudo<(outs DREGS:$dst), |
| (ins i16imm:$src), |
| "ldsw\t$dst, $src", |
| [(set i16:$dst, (load imm:$src))]>, |
| Requires<[HasSRAM]>; |
| } |
| |
| // Indirect loads. |
| let canFoldAsLoad = 1, |
| isReMaterializable = 1 in |
| { |
| def LDRdPtr : FSTLD<0, |
| 0b00, |
| (outs GPR8:$reg), |
| (ins LDSTPtrReg:$ptrreg), |
| "ld\t$reg, $ptrreg", |
| [(set GPR8:$reg, (load i16:$ptrreg))]>, |
| Requires<[HasSRAM]>; |
| |
| // LDW Rd+1:Rd, P |
| // |
| // Expands to: |
| // ld Rd, P+ |
| // ld Rd+1, P |
| let Constraints = "@earlyclobber $reg" in |
| def LDWRdPtr : Pseudo<(outs DREGS:$reg), |
| (ins PTRREGS:$ptrreg), |
| "ldw\t$reg, $ptrreg", |
| [(set i16:$reg, (load i16:$ptrreg))]>, |
| Requires<[HasSRAM]>; |
| } |
| |
| // Indirect loads (with postincrement or predecrement). |
| let mayLoad = 1, |
| hasSideEffects = 0, |
| Constraints = "$ptrreg = $base_wb,@earlyclobber $reg" in |
| { |
| def LDRdPtrPi : FSTLD<0, |
| 0b01, |
| (outs GPR8:$reg, PTRREGS:$base_wb), |
| (ins LDSTPtrReg:$ptrreg), |
| "ld\t$reg, $ptrreg+", |
| []>, |
| Requires<[HasSRAM]>; |
| |
| // LDW Rd+1:Rd, P+ |
| // Expands to: |
| // ld Rd, P+ |
| // ld Rd+1, P+ |
| def LDWRdPtrPi : Pseudo<(outs DREGS:$reg, PTRREGS:$base_wb), |
| (ins PTRREGS:$ptrreg), |
| "ldw\t$reg, $ptrreg+", |
| []>, |
| Requires<[HasSRAM]>; |
| |
| def LDRdPtrPd : FSTLD<0, |
| 0b10, |
| (outs GPR8:$reg, PTRREGS:$base_wb), |
| (ins LDSTPtrReg:$ptrreg), |
| "ld\t$reg, -$ptrreg", |
| []>, |
| Requires<[HasSRAM]>; |
| |
| // LDW Rd+1:Rd, -P |
| // |
| // Expands to: |
| // ld Rd+1, -P |
| // ld Rd, -P |
| def LDWRdPtrPd : Pseudo<(outs DREGS:$reg, PTRREGS:$base_wb), |
| (ins PTRREGS:$ptrreg), |
| "ldw\t$reg, -$ptrreg", |
| []>, |
| Requires<[HasSRAM]>; |
| } |
| |
| // Load indirect with displacement operations. |
| let canFoldAsLoad = 1, |
| isReMaterializable = 1 in |
| { |
| let Constraints = "@earlyclobber $reg" in |
| def LDDRdPtrQ : FSTDLDD<0, |
| (outs GPR8:$reg), |
| (ins memri:$memri), |
| "ldd\t$reg, $memri", |
| [(set i8:$reg, (load addr:$memri))]>, |
| Requires<[HasSRAM]>; |
| |
| // LDDW Rd+1:Rd, P+q |
| // |
| // Expands to: |
| // ldd Rd, P+q |
| // ldd Rd+1, P+q+1 |
| let Constraints = "@earlyclobber $dst" in |
| def LDDWRdPtrQ : Pseudo<(outs DREGS_WITHOUT_Z_WORKAROUND:$dst), |
| (ins memri:$memri), |
| "lddw\t$dst, $memri", |
| [(set i16:$dst, (load addr:$memri))]>, |
| Requires<[HasSRAM]>; |
| |
| // An identical pseudo instruction to LDDWRdPtrQ, expect restricted to the Y |
| // register and without the @earlyclobber flag. |
| // |
| // Used to work around a bug caused by the register allocator not |
| // being able to handle the expansion of a COPY into an machine instruction |
| // that has an earlyclobber flag. This is because the register allocator will |
| // try expand a copy from a register slot into an earlyclobber instruction. |
| // Instructions that are earlyclobber need to be in a dedicated earlyclobber slot. |
| // |
| // This pseudo instruction can be used pre-AVR pseudo expansion in order to |
| // get a frame index load without directly using earlyclobber instructions. |
| // |
| // The pseudo expansion pass trivially expands this into LDDWRdPtrQ. |
| // |
| // This instruction may be removed once PR13375 is fixed. |
| let mayLoad = 1, |
| hasSideEffects = 0 in |
| def LDDWRdYQ : Pseudo<(outs DREGS:$dst), |
| (ins memri:$memri), |
| "lddw\t$dst, $memri", |
| []>, |
| Requires<[HasSRAM]>; |
| } |
| |
| class AtomicLoad<PatFrag Op, RegisterClass DRC, |
| RegisterClass PTRRC> : |
| Pseudo<(outs DRC:$rd), (ins PTRRC:$rr), "atomic_op", |
| [(set DRC:$rd, (Op i16:$rr))]>; |
| |
| class AtomicStore<PatFrag Op, RegisterClass DRC, |
| RegisterClass PTRRC> : |
| Pseudo<(outs), (ins PTRRC:$rd, DRC:$rr), "atomic_op", |
| [(Op i16:$rd, DRC:$rr)]>; |
| |
| class AtomicLoadOp<PatFrag Op, RegisterClass DRC, |
| RegisterClass PTRRC> : |
| Pseudo<(outs DRC:$rd), (ins PTRRC:$rr, DRC:$operand), |
| "atomic_op", |
| [(set DRC:$rd, (Op i16:$rr, DRC:$operand))]>; |
| |
| // FIXME: I think 16-bit atomic binary ops need to mark |
| // r0 as clobbered. |
| |
| // Atomic instructions |
| // =================== |
| // |
| // These are all expanded by AVRExpandPseudoInsts |
| // |
| // 8-bit operations can use any pointer register because |
| // they are expanded directly into an LD/ST instruction. |
| // |
| // 16-bit operations use 16-bit load/store postincrement instructions, |
| // which require PTRDISPREGS. |
| |
| def AtomicLoad8 : AtomicLoad<atomic_load_8, GPR8, PTRREGS>; |
| def AtomicLoad16 : AtomicLoad<atomic_load_16, DREGS, PTRDISPREGS>; |
| |
| def AtomicStore8 : AtomicStore<atomic_store_8, GPR8, PTRREGS>; |
| def AtomicStore16 : AtomicStore<atomic_store_16, DREGS, PTRDISPREGS>; |
| |
| class AtomicLoadOp8<PatFrag Op> : AtomicLoadOp<Op, GPR8, PTRREGS>; |
| class AtomicLoadOp16<PatFrag Op> : AtomicLoadOp<Op, DREGS, PTRDISPREGS>; |
| |
| def AtomicLoadAdd8 : AtomicLoadOp8<atomic_load_add_8>; |
| def AtomicLoadAdd16 : AtomicLoadOp16<atomic_load_add_16>; |
| def AtomicLoadSub8 : AtomicLoadOp8<atomic_load_sub_8>; |
| def AtomicLoadSub16 : AtomicLoadOp16<atomic_load_sub_16>; |
| def AtomicLoadAnd8 : AtomicLoadOp8<atomic_load_and_8>; |
| def AtomicLoadAnd16 : AtomicLoadOp16<atomic_load_and_16>; |
| def AtomicLoadOr8 : AtomicLoadOp8<atomic_load_or_8>; |
| def AtomicLoadOr16 : AtomicLoadOp16<atomic_load_or_16>; |
| def AtomicLoadXor8 : AtomicLoadOp8<atomic_load_xor_8>; |
| def AtomicLoadXor16 : AtomicLoadOp16<atomic_load_xor_16>; |
| def AtomicFence : Pseudo<(outs), (ins), "atomic_fence", |
| [(atomic_fence imm, imm)]>; |
| |
| // Indirect store from register to data space. |
| def STSKRr : F32DM<0b1, |
| (outs), |
| (ins imm16:$k, GPR8:$rd), |
| "sts\t$k, $rd", |
| [(store i8:$rd, imm:$k)]>, |
| Requires<[HasSRAM]>; |
| |
| // STSW K+1:K, Rr+1:Rr |
| // |
| // Expands to: |
| // sts Rr+1, (K+1:K) + 1 |
| // sts Rr, (K+1:K) |
| def STSWKRr : Pseudo<(outs), |
| (ins i16imm:$dst, DREGS:$src), |
| "stsw\t$dst, $src", |
| [(store i16:$src, imm:$dst)]>, |
| Requires<[HasSRAM]>; |
| |
| // Indirect stores. |
| // ST P, Rr |
| // Stores the value of Rr into the location addressed by pointer P. |
| def STPtrRr : FSTLD<1, |
| 0b00, |
| (outs), |
| (ins LDSTPtrReg:$ptrreg, GPR8:$reg), |
| "st\t$ptrreg, $reg", |
| [(store GPR8:$reg, i16:$ptrreg)]>, |
| Requires<[HasSRAM]>; |
| |
| // STW P, Rr+1:Rr |
| // Stores the value of Rr into the location addressed by pointer P. |
| // |
| // Expands to: |
| // st P, Rr |
| // std P+1, Rr+1 |
| def STWPtrRr : Pseudo<(outs), |
| (ins PTRDISPREGS:$ptrreg, DREGS:$reg), |
| "stw\t$ptrreg, $reg", |
| [(store i16:$reg, i16:$ptrreg)]>, |
| Requires<[HasSRAM]>; |
| |
| // Indirect stores (with postincrement or predecrement). |
| let Constraints = "$ptrreg = $base_wb,@earlyclobber $base_wb" in |
| { |
| |
| // ST P+, Rr |
| // Stores the value of Rr into the location addressed by pointer P. |
| // Post increments P. |
| def STPtrPiRr : FSTLD<1, |
| 0b01, |
| (outs LDSTPtrReg:$base_wb), |
| (ins LDSTPtrReg:$ptrreg, GPR8:$reg, i8imm:$offs), |
| "st\t$ptrreg+, $reg", |
| [(set i16:$base_wb, |
| (post_store GPR8:$reg, i16:$ptrreg, imm:$offs))]>, |
| Requires<[HasSRAM]>; |
| |
| // STW P+, Rr+1:Rr |
| // Stores the value of Rr into the location addressed by pointer P. |
| // Post increments P. |
| // |
| // Expands to: |
| // st P+, Rr |
| // st P+, Rr+1 |
| def STWPtrPiRr : Pseudo<(outs PTRREGS:$base_wb), |
| (ins PTRREGS:$ptrreg, DREGS:$trh, i8imm:$offs), |
| "stw\t$ptrreg+, $trh", |
| [(set PTRREGS:$base_wb, |
| (post_store DREGS:$trh, PTRREGS:$ptrreg, imm:$offs))]>, |
| Requires<[HasSRAM]>; |
| |
| // ST -P, Rr |
| // Stores the value of Rr into the location addressed by pointer P. |
| // Pre decrements P. |
| def STPtrPdRr : FSTLD<1, |
| 0b10, |
| (outs LDSTPtrReg:$base_wb), |
| (ins LDSTPtrReg:$ptrreg, GPR8:$reg, i8imm:$offs), |
| "st\t-$ptrreg, $reg", |
| [(set i16:$base_wb, |
| (pre_store GPR8:$reg, i16:$ptrreg, imm:$offs))]>, |
| Requires<[HasSRAM]>; |
| |
| // STW -P, Rr+1:Rr |
| // Stores the value of Rr into the location addressed by pointer P. |
| // Pre decrements P. |
| // |
| // Expands to: |
| // st -P, Rr+1 |
| // st -P, Rr |
| def STWPtrPdRr : Pseudo<(outs PTRREGS:$base_wb), |
| (ins PTRREGS:$ptrreg, DREGS:$reg, i8imm:$offs), |
| "stw\t-$ptrreg, $reg", |
| [(set PTRREGS:$base_wb, |
| (pre_store i16:$reg, i16:$ptrreg, imm:$offs))]>, |
| Requires<[HasSRAM]>; |
| } |
| |
| // Store indirect with displacement operations. |
| // STD P+q, Rr |
| // Stores the value of Rr into the location addressed by pointer P with a |
| // displacement of q. Does not modify P. |
| def STDPtrQRr : FSTDLDD<1, |
| (outs), |
| (ins memri:$memri, GPR8:$reg), |
| "std\t$memri, $reg", |
| [(store i8:$reg, addr:$memri)]>, |
| Requires<[HasSRAM]>; |
| |
| // STDW P+q, Rr+1:Rr |
| // Stores the value of Rr into the location addressed by pointer P with a |
| // displacement of q. Does not modify P. |
| // |
| // Expands to: |
| // std P+q, Rr |
| // std P+q+1, Rr+1 |
| def STDWPtrQRr : Pseudo<(outs), |
| (ins memri:$memri, DREGS:$src), |
| "stdw\t$memri, $src", |
| [(store i16:$src, addr:$memri)]>, |
| Requires<[HasSRAM]>; |
| |
| |
| // Load program memory operations. |
| let canFoldAsLoad = 1, |
| isReMaterializable = 1, |
| mayLoad = 1, |
| hasSideEffects = 0 in |
| { |
| let Defs = [R0], |
| Uses = [R31R30] in |
| def LPM : F16<0b1001010111001000, |
| (outs), |
| (ins), |
| "lpm", |
| []>, |
| Requires<[HasLPM]>; |
| |
| def LPMRdZ : FLPMX<0, |
| 0, |
| (outs GPR8:$dst), |
| (ins ZREG:$z), |
| "lpm\t$dst, $z", |
| []>, |
| Requires<[HasLPMX]>; |
| |
| // Load program memory, while postincrementing the Z register. |
| let Defs = [R31R30] in |
| { |
| def LPMRdZPi : FLPMX<0, |
| 1, |
| (outs GPR8:$dst), |
| (ins ZREG:$z), |
| "lpm\t$dst, $z+", |
| []>, |
| Requires<[HasLPMX]>; |
| |
| def LPMWRdZ : Pseudo<(outs DREGS:$dst), |
| (ins ZREG:$z), |
| "lpmw\t$dst, $z", |
| []>, |
| Requires<[HasLPMX]>; |
| |
| def LPMWRdZPi : Pseudo<(outs DREGS:$dst), |
| (ins ZREG:$z), |
| "lpmw\t$dst, $z+", |
| []>, |
| Requires<[HasLPMX]>; |
| } |
| } |
| |
| // Extended load program memory operations. |
| let mayLoad = 1, |
| hasSideEffects = 0 in |
| { |
| let Defs = [R0], |
| Uses = [R31R30] in |
| def ELPM : F16<0b1001010111011000, |
| (outs), |
| (ins), |
| "elpm", |
| []>, |
| Requires<[HasELPM]>; |
| |
| def ELPMRdZ : FLPMX<1, |
| 0, |
| (outs GPR8:$dst), |
| (ins ZREG:$z), |
| "elpm\t$dst, $z", |
| []>, |
| Requires<[HasELPMX]>; |
| |
| let Defs = [R31R30] in |
| def ELPMRdZPi : FLPMX<1, |
| 1, |
| (outs GPR8:$dst), |
| (ins ZREG: $z), |
| "elpm\t$dst, $z+", |
| []>, |
| Requires<[HasELPMX]>; |
| } |
| |
| // Store program memory operations. |
| let Uses = [R1, R0] in |
| { |
| let Uses = [R31R30, R1, R0] in |
| def SPM : F16<0b1001010111101000, |
| (outs), |
| (ins), |
| "spm", |
| []>, |
| Requires<[HasSPM]>; |
| |
| let Defs = [R31R30] in |
| def SPMZPi : F16<0b1001010111111000, |
| (outs), |
| (ins ZREG:$z), |
| "spm $z+", |
| []>, |
| Requires<[HasSPMX]>; |
| } |
| |
| // Read data from IO location operations. |
| let canFoldAsLoad = 1, |
| isReMaterializable = 1 in |
| { |
| def INRdA : FIORdA<(outs GPR8:$dst), |
| (ins imm_port6:$src), |
| "in\t$dst, $src", |
| [(set i8:$dst, (load ioaddr8:$src))]>; |
| |
| def INWRdA : Pseudo<(outs DREGS:$dst), |
| (ins imm_port6:$src), |
| "inw\t$dst, $src", |
| [(set i16:$dst, (load ioaddr16:$src))]>; |
| } |
| |
| // Write data to IO location operations. |
| def OUTARr : FIOARr<(outs), |
| (ins imm_port6:$dst, GPR8:$src), |
| "out\t$dst, $src", |
| [(store i8:$src, ioaddr8:$dst)]>; |
| |
| def OUTWARr : Pseudo<(outs), |
| (ins imm_port6:$dst, DREGS:$src), |
| "outw\t$dst, $src", |
| [(store i16:$src, ioaddr16:$dst)]>; |
| |
| // Stack push/pop operations. |
| let Defs = [SP], |
| Uses = [SP], |
| hasSideEffects = 0 in |
| { |
| // Stack push operations. |
| let mayStore = 1 in |
| { |
| def PUSHRr : FRd<0b1001, |
| 0b0011111, |
| (outs), |
| (ins GPR8:$reg), |
| "push\t$reg", |
| []>, |
| Requires<[HasSRAM]>; |
| |
| def PUSHWRr : Pseudo<(outs), |
| (ins DREGS:$reg), |
| "pushw\t$reg", |
| []>, |
| Requires<[HasSRAM]>; |
| } |
| |
| // Stack pop operations. |
| let mayLoad = 1 in |
| { |
| def POPRd : FRd<0b1001, |
| 0b0001111, |
| (outs GPR8:$reg), |
| (ins), |
| "pop\t$reg", |
| []>, |
| Requires<[HasSRAM]>; |
| |
| def POPWRd : Pseudo<(outs DREGS:$reg), |
| (ins), |
| "popw\t$reg", |
| []>, |
| Requires<[HasSRAM]>; |
| } |
| } |
| |
| // Read-Write-Modify (RMW) instructions. |
| def XCHZRd : FZRd<0b100, |
| (outs GPR8:$rd), |
| (ins ZREG:$z), |
| "xch\t$z, $rd", |
| []>, |
| Requires<[SupportsRMW]>; |
| |
| def LASZRd : FZRd<0b101, |
| (outs GPR8:$rd), |
| (ins ZREG:$z), |
| "las\t$z, $rd", |
| []>, |
| Requires<[SupportsRMW]>; |
| |
| def LACZRd : FZRd<0b110, |
| (outs GPR8:$rd), |
| (ins ZREG:$z), |
| "lac\t$z, $rd", |
| []>, |
| Requires<[SupportsRMW]>; |
| |
| def LATZRd : FZRd<0b111, |
| (outs GPR8:$rd), |
| (ins ZREG:$z), |
| "lat\t$z, $rd", |
| []>, |
| Requires<[SupportsRMW]>; |
| |
| //===----------------------------------------------------------------------===// |
| // Bit and bit-test instructions |
| //===----------------------------------------------------------------------===// |
| |
| // Bit shift/rotate operations. |
| let Constraints = "$src = $rd", |
| Defs = [SREG] in |
| { |
| // 8-bit LSL is an alias of ADD Rd, Rd |
| |
| def LSLWRd : Pseudo<(outs DREGS:$rd), |
| (ins DREGS:$src), |
| "lslw\t$rd", |
| [(set i16:$rd, (AVRlsl i16:$src)), (implicit SREG)]>; |
| |
| def LSRRd : FRd<0b1001, |
| 0b0100110, |
| (outs GPR8:$rd), |
| (ins GPR8:$src), |
| "lsr\t$rd", |
| [(set i8:$rd, (AVRlsr i8:$src)), (implicit SREG)]>; |
| |
| def LSRWRd : Pseudo<(outs DREGS:$rd), |
| (ins DREGS:$src), |
| "lsrw\t$rd", |
| [(set i16:$rd, (AVRlsr i16:$src)), (implicit SREG)]>; |
| |
| def ASRRd : FRd<0b1001, |
| 0b0100101, |
| (outs GPR8:$rd), |
| (ins GPR8:$src), |
| "asr\t$rd", |
| [(set i8:$rd, (AVRasr i8:$src)), (implicit SREG)]>; |
| |
| def ASRWRd : Pseudo<(outs DREGS:$rd), |
| (ins DREGS:$src), |
| "asrw\t$rd", |
| [(set i16:$rd, (AVRasr i16:$src)), (implicit SREG)]>; |
| |
| // Bit rotate operations. |
| let Uses = [SREG] in |
| { |
| // 8-bit ROL is an alias of ADC Rd, Rd |
| |
| def ROLWRd : Pseudo<(outs DREGS:$rd), |
| (ins DREGS:$src), |
| "rolw\t$rd", |
| [(set i16:$rd, (AVRrol i16:$src)), (implicit SREG)]>; |
| |
| def RORRd : FRd<0b1001, |
| 0b0100111, |
| (outs GPR8:$rd), |
| (ins GPR8:$src), |
| "ror\t$rd", |
| [(set i8:$rd, (AVRror i8:$src)), (implicit SREG)]>; |
| |
| def RORWRd : Pseudo<(outs DREGS:$rd), |
| (ins DREGS:$src), |
| "rorw\t$rd", |
| [(set i16:$rd, (AVRror i16:$src)), (implicit SREG)]>; |
| } |
| } |
| |
| // SWAP Rd |
| // Swaps the high and low nibbles in a register. |
| let Constraints = "$src = $rd" in |
| def SWAPRd : FRd<0b1001, |
| 0b0100010, |
| (outs GPR8:$rd), |
| (ins GPR8:$src), |
| "swap\t$rd", |
| [(set i8:$rd, (bswap i8:$src))]>; |
| |
| // IO register bit set/clear operations. |
| //:TODO: add patterns when popcount(imm)==2 to be expanded with 2 sbi/cbi |
| // instead of in+ori+out which requires one more instr. |
| def SBIAb : FIOBIT<0b10, |
| (outs), |
| (ins imm_port5:$addr, i8imm:$bit), |
| "sbi\t$addr, $bit", |
| [(store (or (i8 (load lowioaddr8:$addr)), iobitpos8:$bit), |
| lowioaddr8:$addr)]>; |
| |
| def CBIAb : FIOBIT<0b00, |
| (outs), |
| (ins imm_port5:$addr, i8imm:$bit), |
| "cbi\t$addr, $bit", |
| [(store (and (i8 (load lowioaddr8:$addr)), iobitposn8:$bit), |
| lowioaddr8:$addr)]>; |
| |
| // Status register bit load/store operations. |
| let Defs = [SREG] in |
| def BST : FRdB<0b01, |
| (outs), |
| (ins GPR8:$rd, i8imm:$b), |
| "bst\t$rd, $b", |
| []>; |
| |
| let Uses = [SREG] in |
| def BLD : FRdB<0b00, |
| (outs), |
| (ins GPR8:$rd, i8imm:$b), |
| "bld\t$rd, $b", |
| []>; |
| |
| def CBR : InstAlias<"cbr\t$rd, $k", (ANDIRdK LD8:$rd, imm_com8:$k), 0>; |
| |
| // CLR Rd |
| // Alias for EOR Rd, Rd |
| // ------------- |
| // Clears all bits in a register. |
| def CLR : InstAlias<"clr\t$rd", (EORRdRr GPR8:$rd, GPR8:$rd)>; |
| |
| // LSL Rd |
| // Alias for ADD Rd, Rd |
| // -------------- |
| // Logical shift left one bit. |
| def LSL : InstAlias<"lsl\t$rd", (ADDRdRr GPR8:$rd, GPR8:$rd)>; |
| |
| def ROL : InstAlias<"rol\t$rd", (ADCRdRr GPR8:$rd, GPR8:$rd)>; |
| |
| // SER Rd |
| // Alias for LDI Rd, 0xff |
| // --------- |
| // Sets all bits in a register. |
| def : InstAlias<"ser\t$rd", (LDIRdK LD8:$rd, 0xff), 0>; |
| |
| let Defs = [SREG] in |
| def BSETs : FS<0, |
| (outs), |
| (ins i8imm:$s), |
| "bset\t$s", |
| []>; |
| |
| let Defs = [SREG] in |
| def BCLRs : FS<1, |
| (outs), |
| (ins i8imm:$s), |
| "bclr\t$s", |
| []>; |
| |
| // Set/clear aliases for the carry (C) status flag (bit 0). |
| def : InstAlias<"sec", (BSETs 0)>; |
| def : InstAlias<"clc", (BCLRs 0)>; |
| |
| // Set/clear aliases for the zero (Z) status flag (bit 1). |
| def : InstAlias<"sez", (BSETs 1)>; |
| def : InstAlias<"clz", (BCLRs 1)>; |
| |
| // Set/clear aliases for the negative (N) status flag (bit 2). |
| def : InstAlias<"sen", (BSETs 2)>; |
| def : InstAlias<"cln", (BCLRs 2)>; |
| |
| // Set/clear aliases for the overflow (V) status flag (bit 3). |
| def : InstAlias<"sev", (BSETs 3)>; |
| def : InstAlias<"clv", (BCLRs 3)>; |
| |
| // Set/clear aliases for the signed (S) status flag (bit 4). |
| def : InstAlias<"ses", (BSETs 4)>; |
| def : InstAlias<"cls", (BCLRs 4)>; |
| |
| // Set/clear aliases for the half-carry (H) status flag (bit 5). |
| def : InstAlias<"seh", (BSETs 5)>; |
| def : InstAlias<"clh", (BCLRs 5)>; |
| |
| // Set/clear aliases for the T status flag (bit 6). |
| def : InstAlias<"set", (BSETs 6)>; |
| def : InstAlias<"clt", (BCLRs 6)>; |
| |
| // Set/clear aliases for the interrupt (I) status flag (bit 7). |
| def : InstAlias<"sei", (BSETs 7)>; |
| def : InstAlias<"cli", (BCLRs 7)>; |
| |
| //===----------------------------------------------------------------------===// |
| // Special/Control instructions |
| //===----------------------------------------------------------------------===// |
| |
| // BREAK |
| // Breakpoint instruction |
| // --------- |
| // <|1001|0101|1001|1000> |
| def BREAK : F16<0b1001010110011000, |
| (outs), |
| (ins), |
| "break", |
| []>, |
| Requires<[HasBREAK]>; |
| |
| // NOP |
| // No-operation instruction |
| // --------- |
| // <|0000|0000|0000|0000> |
| def NOP : F16<0b0000000000000000, |
| (outs), |
| (ins), |
| "nop", |
| []>; |
| |
| // SLEEP |
| // Sleep instruction |
| // --------- |
| // <|1001|0101|1000|1000> |
| def SLEEP : F16<0b1001010110001000, |
| (outs), |
| (ins), |
| "sleep", |
| []>; |
| |
| // WDR |
| // Watchdog reset |
| // --------- |
| // <|1001|0101|1010|1000> |
| def WDR : F16<0b1001010110101000, |
| (outs), |
| (ins), |
| "wdr", |
| []>; |
| |
| //===----------------------------------------------------------------------===// |
| // Pseudo instructions for later expansion |
| //===----------------------------------------------------------------------===// |
| |
| //:TODO: Optimize this for wider types AND optimize the following code |
| // compile int foo(char a, char b, char c, char d) {return d+b;} |
| // looks like a missed sext_inreg opportunity. |
| def SEXT : ExtensionPseudo< |
| (outs DREGS:$dst), |
| (ins GPR8:$src), |
| "sext\t$dst, $src", |
| [(set i16:$dst, (sext i8:$src)), (implicit SREG)] |
| >; |
| |
| def ZEXT : ExtensionPseudo< |
| (outs DREGS:$dst), |
| (ins GPR8:$src), |
| "zext\t$dst, $src", |
| [(set i16:$dst, (zext i8:$src)), (implicit SREG)] |
| >; |
| |
| // This pseudo gets expanded into a movw+adiw thus it clobbers SREG. |
| let Defs = [SREG], |
| hasSideEffects = 0 in |
| def FRMIDX : Pseudo<(outs DLDREGS:$dst), |
| (ins DLDREGS:$src, i16imm:$src2), |
| "frmidx\t$dst, $src, $src2", |
| []>; |
| |
| // This pseudo is either converted to a regular store or a push which clobbers |
| // SP. |
| def STDSPQRr : StorePseudo< |
| (outs), |
| (ins memspi:$dst, GPR8:$src), |
| "stdstk\t$dst, $src", |
| [(store i8:$src, addr:$dst)] |
| >; |
| |
| // This pseudo is either converted to a regular store or a push which clobbers |
| // SP. |
| def STDWSPQRr : StorePseudo< |
| (outs), |
| (ins memspi:$dst, DREGS:$src), |
| "stdwstk\t$dst, $src", |
| [(store i16:$src, addr:$dst)] |
| >; |
| |
| // SP read/write pseudos. |
| let hasSideEffects = 0 in |
| { |
| let Uses = [SP] in |
| def SPREAD : Pseudo< |
| (outs DREGS:$dst), |
| (ins GPRSP:$src), |
| "spread\t$dst, $src", |
| [] |
| >; |
| |
| let Defs = [SP] in |
| def SPWRITE : Pseudo< |
| (outs GPRSP:$dst), |
| (ins DREGS:$src), |
| "spwrite\t$dst, $src", |
| []>; |
| } |
| |
| def Select8 : SelectPseudo< |
| (outs GPR8:$dst), |
| (ins GPR8:$src, GPR8:$src2, i8imm:$cc), |
| "# Select8 PSEUDO", |
| [(set i8:$dst, (AVRselectcc i8:$src, i8:$src2, imm:$cc))] |
| >; |
| |
| def Select16 : SelectPseudo< |
| (outs DREGS:$dst), |
| (ins DREGS:$src, DREGS:$src2, i8imm:$cc), |
| "# Select16 PSEUDO", |
| [(set i16:$dst, (AVRselectcc i16:$src, i16:$src2, imm:$cc))] |
| >; |
| |
| def Lsl8 : ShiftPseudo< |
| (outs GPR8:$dst), |
| (ins GPR8:$src, GPR8:$cnt), |
| "# Lsl8 PSEUDO", |
| [(set i8:$dst, (AVRlslLoop i8:$src, i8:$cnt))] |
| >; |
| |
| def Lsl16 : ShiftPseudo< |
| (outs DREGS:$dst), |
| (ins DREGS:$src, GPR8:$cnt), |
| "# Lsl16 PSEUDO", |
| [(set i16:$dst, (AVRlslLoop i16:$src, i8:$cnt))] |
| >; |
| |
| def Lsr8 : ShiftPseudo< |
| (outs GPR8:$dst), |
| (ins GPR8:$src, GPR8:$cnt), |
| "# Lsr8 PSEUDO", |
| [(set i8:$dst, (AVRlsrLoop i8:$src, i8:$cnt))] |
| >; |
| |
| def Lsr16 : ShiftPseudo< |
| (outs DREGS:$dst), |
| (ins DREGS:$src, GPR8:$cnt), |
| "# Lsr16 PSEUDO", |
| [(set i16:$dst, (AVRlsrLoop i16:$src, i8:$cnt))] |
| >; |
| |
| def Rol8 : ShiftPseudo< |
| (outs GPR8:$dst), |
| (ins GPR8:$src, GPR8:$cnt), |
| "# Rol8 PSEUDO", |
| [(set i8:$dst, (AVRrolLoop i8:$src, i8:$cnt))] |
| >; |
| |
| def Rol16 : ShiftPseudo< |
| (outs DREGS:$dst), |
| (ins DREGS:$src, GPR8:$cnt), |
| "# Rol16 PSEUDO", |
| [(set i16:$dst, (AVRrolLoop i16:$src, i8:$cnt))] |
| >; |
| |
| def Ror8 : ShiftPseudo< |
| (outs GPR8:$dst), |
| (ins GPR8:$src, GPR8:$cnt), |
| "# Ror8 PSEUDO", |
| [(set i8:$dst, (AVRrorLoop i8:$src, i8:$cnt))] |
| >; |
| |
| def Ror16 : ShiftPseudo< |
| (outs DREGS:$dst), |
| (ins DREGS:$src, GPR8:$cnt), |
| "# Ror16 PSEUDO", |
| [(set i16:$dst, (AVRrorLoop i16:$src, i8:$cnt))] |
| >; |
| |
| def Asr8 : ShiftPseudo< |
| (outs GPR8:$dst), |
| (ins GPR8:$src, GPR8:$cnt), |
| "# Asr8 PSEUDO", |
| [(set i8:$dst, (AVRasrLoop i8:$src, i8:$cnt))] |
| >; |
| |
| def Asr16 : ShiftPseudo< |
| (outs DREGS:$dst), |
| (ins DREGS:$src, GPR8:$cnt), |
| "# Asr16 PSEUDO", |
| [(set i16:$dst, (AVRasrLoop i16:$src, i8:$cnt))] |
| >; |
| |
| |
| //===----------------------------------------------------------------------===// |
| // Non-Instruction Patterns |
| //===----------------------------------------------------------------------===// |
| |
| //:TODO: look in x86InstrCompiler.td for odd encoding trick related to |
| // add x, 128 -> sub x, -128. Clang is emitting an eor for this (ldi+eor) |
| |
| // the add instruction always writes the carry flag |
| def : Pat<(addc i8:$src, i8:$src2), |
| (ADDRdRr i8:$src, i8:$src2)>; |
| def : Pat<(addc DREGS:$src, DREGS:$src2), |
| (ADDWRdRr DREGS:$src, DREGS:$src2)>; |
| |
| // all sub instruction variants always writes the carry flag |
| def : Pat<(subc i8:$src, i8:$src2), |
| (SUBRdRr i8:$src, i8:$src2)>; |
| def : Pat<(subc i16:$src, i16:$src2), |
| (SUBWRdRr i16:$src, i16:$src2)>; |
| def : Pat<(subc i8:$src, imm:$src2), |
| (SUBIRdK i8:$src, imm:$src2)>; |
| def : Pat<(subc i16:$src, imm:$src2), |
| (SUBIWRdK i16:$src, imm:$src2)>; |
| |
| // These patterns convert add (x, -imm) to sub (x, imm) since we dont have |
| // any add with imm instructions. Also take care of the adiw/sbiw instructions. |
| def : Pat<(add i16:$src1, imm0_63_neg:$src2), |
| (SBIWRdK i16:$src1, (imm0_63_neg:$src2))>; |
| def : Pat<(add i16:$src1, imm:$src2), |
| (SUBIWRdK i16:$src1, (imm16_neg_XFORM imm:$src2))>; |
| def : Pat<(addc i16:$src1, imm:$src2), |
| (SUBIWRdK i16:$src1, (imm16_neg_XFORM imm:$src2))>; |
| def : Pat<(adde i16:$src1, imm:$src2), |
| (SBCIWRdK i16:$src1, (imm16_neg_XFORM imm:$src2))>; |
| |
| def : Pat<(add i8:$src1, imm:$src2), |
| (SUBIRdK i8:$src1, (imm8_neg_XFORM imm:$src2))>; |
| def : Pat<(addc i8:$src1, imm:$src2), |
| (SUBIRdK i8:$src1, (imm8_neg_XFORM imm:$src2))>; |
| def : Pat<(adde i8:$src1, imm:$src2), |
| (SBCIRdK i8:$src1, (imm8_neg_XFORM imm:$src2))>; |
| |
| // Calls. |
| def : Pat<(AVRcall (i16 tglobaladdr:$dst)), |
| (CALLk tglobaladdr:$dst)>; |
| def : Pat<(AVRcall (i16 texternalsym:$dst)), |
| (CALLk texternalsym:$dst)>; |
| |
| // `anyext` |
| def : Pat<(i16 (anyext i8:$src)), |
| (INSERT_SUBREG (i16 (IMPLICIT_DEF)), i8:$src, sub_lo)>; |
| |
| // `trunc` |
| def : Pat<(i8 (trunc i16:$src)), |
| (EXTRACT_SUBREG i16:$src, sub_lo)>; |
| |
| // sext_inreg |
| def : Pat<(sext_inreg i16:$src, i8), |
| (SEXT (i8 (EXTRACT_SUBREG i16:$src, sub_lo)))>; |
| |
| // GlobalAddress |
| def : Pat<(i16 (AVRWrapper tglobaladdr:$dst)), |
| (LDIWRdK tglobaladdr:$dst)>; |
| def : Pat<(add i16:$src, (AVRWrapper tglobaladdr:$src2)), |
| (SUBIWRdK i16:$src, tglobaladdr:$src2)>; |
| def : Pat<(i8 (load (AVRWrapper tglobaladdr:$dst))), |
| (LDSRdK tglobaladdr:$dst)>; |
| def : Pat<(i16 (load (AVRWrapper tglobaladdr:$dst))), |
| (LDSWRdK tglobaladdr:$dst)>; |
| def : Pat<(store i8:$src, (i16 (AVRWrapper tglobaladdr:$dst))), |
| (STSKRr tglobaladdr:$dst, i8:$src)>; |
| def : Pat<(store i16:$src, (i16 (AVRWrapper tglobaladdr:$dst))), |
| (STSWKRr tglobaladdr:$dst, i16:$src)>; |
| |
| // BlockAddress |
| def : Pat<(i16 (AVRWrapper tblockaddress:$dst)), |
| (LDIWRdK tblockaddress:$dst)>; |
| |
| // hi-reg truncation : trunc(int16 >> 8) |
| //:FIXME: i think it's better to emit an extract subreg node in the DAG than |
| // all this mess once we get optimal shift code |
| // lol... I think so, too. [@agnat] |
| def : Pat<(i8 (trunc (AVRlsr (AVRlsr (AVRlsr (AVRlsr (AVRlsr (AVRlsr (AVRlsr |
| (AVRlsr DREGS:$src)))))))))), |
| (EXTRACT_SUBREG DREGS:$src, sub_hi)>; |
| |
| // :FIXME: DAGCombiner produces an shl node after legalization from these seq: |
| // BR_JT -> (mul x, 2) -> (shl x, 1) |
| def : Pat<(shl i16:$src1, (i8 1)), |
| (LSLWRd i16:$src1)>; |
| |
| // Lowering of 'tst' node to 'TST' instruction. |
| // TST is an alias of AND Rd, Rd. |
| def : Pat<(AVRtst i8:$rd), |
| (ANDRdRr GPR8:$rd, GPR8:$rd)>; |
| |
| // Lowering of 'lsl' node to 'LSL' instruction. |
| // LSL is an alias of 'ADD Rd, Rd' |
| def : Pat<(AVRlsl i8:$rd), |
| (ADDRdRr GPR8:$rd, GPR8:$rd)>; |
| |
