blob: 5612e95679437e0a373e63fe79d084709a6097ce [file] [log] [blame]
//===- LoopVectorize.cpp - A Loop Vectorizer ------------------------------===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// This is the LLVM loop vectorizer. This pass modifies 'vectorizable' loops
// and generates target-independent LLVM-IR.
// The vectorizer uses the TargetTransformInfo analysis to estimate the costs
// of instructions in order to estimate the profitability of vectorization.
//
// The loop vectorizer combines consecutive loop iterations into a single
// 'wide' iteration. After this transformation the index is incremented
// by the SIMD vector width, and not by one.
//
// This pass has three parts:
// 1. The main loop pass that drives the different parts.
// 2. LoopVectorizationLegality - A unit that checks for the legality
// of the vectorization.
// 3. InnerLoopVectorizer - A unit that performs the actual
// widening of instructions.
// 4. LoopVectorizationCostModel - A unit that checks for the profitability
// of vectorization. It decides on the optimal vector width, which
// can be one, if vectorization is not profitable.
//
// There is a development effort going on to migrate loop vectorizer to the
// VPlan infrastructure and to introduce outer loop vectorization support (see
// docs/Proposal/VectorizationPlan.rst and
// http://lists.llvm.org/pipermail/llvm-dev/2017-December/119523.html). For this
// purpose, we temporarily introduced the VPlan-native vectorization path: an
// alternative vectorization path that is natively implemented on top of the
// VPlan infrastructure. See EnableVPlanNativePath for enabling.
//
//===----------------------------------------------------------------------===//
//
// The reduction-variable vectorization is based on the paper:
// D. Nuzman and R. Henderson. Multi-platform Auto-vectorization.
//
// Variable uniformity checks are inspired by:
// Karrenberg, R. and Hack, S. Whole Function Vectorization.
//
// The interleaved access vectorization is based on the paper:
// Dorit Nuzman, Ira Rosen and Ayal Zaks. Auto-Vectorization of Interleaved
// Data for SIMD
//
// Other ideas/concepts are from:
// A. Zaks and D. Nuzman. Autovectorization in GCC-two years later.
//
// S. Maleki, Y. Gao, M. Garzaran, T. Wong and D. Padua. An Evaluation of
// Vectorizing Compilers.
//
//===----------------------------------------------------------------------===//
#include "llvm/Transforms/Vectorize/LoopVectorize.h"
#include "LoopVectorizationPlanner.h"
#include "VPRecipeBuilder.h"
#include "VPlanHCFGBuilder.h"
#include "VPlanHCFGTransforms.h"
#include "VPlanPredicator.h"
#include "llvm/ADT/APInt.h"
#include "llvm/ADT/ArrayRef.h"
#include "llvm/ADT/DenseMap.h"
#include "llvm/ADT/DenseMapInfo.h"
#include "llvm/ADT/Hashing.h"
#include "llvm/ADT/MapVector.h"
#include "llvm/ADT/None.h"
#include "llvm/ADT/Optional.h"
#include "llvm/ADT/STLExtras.h"
#include "llvm/ADT/SetVector.h"
#include "llvm/ADT/SmallPtrSet.h"
#include "llvm/ADT/SmallVector.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/ADT/StringRef.h"
#include "llvm/ADT/Twine.h"
#include "llvm/ADT/iterator_range.h"
#include "llvm/Analysis/AssumptionCache.h"
#include "llvm/Analysis/BasicAliasAnalysis.h"
#include "llvm/Analysis/BlockFrequencyInfo.h"
#include "llvm/Analysis/CFG.h"
#include "llvm/Analysis/CodeMetrics.h"
#include "llvm/Analysis/DemandedBits.h"
#include "llvm/Analysis/GlobalsModRef.h"
#include "llvm/Analysis/LoopAccessAnalysis.h"
#include "llvm/Analysis/LoopAnalysisManager.h"
#include "llvm/Analysis/LoopInfo.h"
#include "llvm/Analysis/LoopIterator.h"
#include "llvm/Analysis/MemorySSA.h"
#include "llvm/Analysis/OptimizationRemarkEmitter.h"
#include "llvm/Analysis/ScalarEvolution.h"
#include "llvm/Analysis/ScalarEvolutionExpander.h"
#include "llvm/Analysis/ScalarEvolutionExpressions.h"
#include "llvm/Analysis/TargetLibraryInfo.h"
#include "llvm/Analysis/TargetTransformInfo.h"
#include "llvm/Analysis/VectorUtils.h"
#include "llvm/IR/Attributes.h"
#include "llvm/IR/BasicBlock.h"
#include "llvm/IR/CFG.h"
#include "llvm/IR/Constant.h"
#include "llvm/IR/Constants.h"
#include "llvm/IR/DataLayout.h"
#include "llvm/IR/DebugInfoMetadata.h"
#include "llvm/IR/DebugLoc.h"
#include "llvm/IR/DerivedTypes.h"
#include "llvm/IR/DiagnosticInfo.h"
#include "llvm/IR/Dominators.h"
#include "llvm/IR/Function.h"
#include "llvm/IR/IRBuilder.h"
#include "llvm/IR/InstrTypes.h"
#include "llvm/IR/Instruction.h"
#include "llvm/IR/Instructions.h"
#include "llvm/IR/IntrinsicInst.h"
#include "llvm/IR/Intrinsics.h"
#include "llvm/IR/LLVMContext.h"
#include "llvm/IR/Metadata.h"
#include "llvm/IR/Module.h"
#include "llvm/IR/Operator.h"
#include "llvm/IR/Type.h"
#include "llvm/IR/Use.h"
#include "llvm/IR/User.h"
#include "llvm/IR/Value.h"
#include "llvm/IR/ValueHandle.h"
#include "llvm/IR/Verifier.h"
#include "llvm/Pass.h"
#include "llvm/Support/Casting.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Compiler.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/MathExtras.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/Transforms/Utils/BasicBlockUtils.h"
#include "llvm/Transforms/Utils/LoopSimplify.h"
#include "llvm/Transforms/Utils/LoopUtils.h"
#include "llvm/Transforms/Utils/LoopVersioning.h"
#include "llvm/Transforms/Vectorize/LoopVectorizationLegality.h"
#include <algorithm>
#include <cassert>
#include <cstdint>
#include <cstdlib>
#include <functional>
#include <iterator>
#include <limits>
#include <memory>
#include <string>
#include <tuple>
#include <utility>
#include <vector>
using namespace llvm;
#define LV_NAME "loop-vectorize"
#define DEBUG_TYPE LV_NAME
/// @{
/// Metadata attribute names
static const char *const LLVMLoopVectorizeFollowupAll =
"llvm.loop.vectorize.followup_all";
static const char *const LLVMLoopVectorizeFollowupVectorized =
"llvm.loop.vectorize.followup_vectorized";
static const char *const LLVMLoopVectorizeFollowupEpilogue =
"llvm.loop.vectorize.followup_epilogue";
/// @}
STATISTIC(LoopsVectorized, "Number of loops vectorized");
STATISTIC(LoopsAnalyzed, "Number of loops analyzed for vectorization");
/// Loops with a known constant trip count below this number are vectorized only
/// if no scalar iteration overheads are incurred.
static cl::opt<unsigned> TinyTripCountVectorThreshold(
"vectorizer-min-trip-count", cl::init(16), cl::Hidden,
cl::desc("Loops with a constant trip count that is smaller than this "
"value are vectorized only if no scalar iteration overheads "
"are incurred."));
static cl::opt<bool> MaximizeBandwidth(
"vectorizer-maximize-bandwidth", cl::init(false), cl::Hidden,
cl::desc("Maximize bandwidth when selecting vectorization factor which "
"will be determined by the smallest type in loop."));
static cl::opt<bool> EnableInterleavedMemAccesses(
"enable-interleaved-mem-accesses", cl::init(false), cl::Hidden,
cl::desc("Enable vectorization on interleaved memory accesses in a loop"));
/// An interleave-group may need masking if it resides in a block that needs
/// predication, or in order to mask away gaps.
static cl::opt<bool> EnableMaskedInterleavedMemAccesses(
"enable-masked-interleaved-mem-accesses", cl::init(false), cl::Hidden,
cl::desc("Enable vectorization on masked interleaved memory accesses in a loop"));
/// We don't interleave loops with a known constant trip count below this
/// number.
static const unsigned TinyTripCountInterleaveThreshold = 128;
static cl::opt<unsigned> ForceTargetNumScalarRegs(
"force-target-num-scalar-regs", cl::init(0), cl::Hidden,
cl::desc("A flag that overrides the target's number of scalar registers."));
static cl::opt<unsigned> ForceTargetNumVectorRegs(
"force-target-num-vector-regs", cl::init(0), cl::Hidden,
cl::desc("A flag that overrides the target's number of vector registers."));
static cl::opt<unsigned> ForceTargetMaxScalarInterleaveFactor(
"force-target-max-scalar-interleave", cl::init(0), cl::Hidden,
cl::desc("A flag that overrides the target's max interleave factor for "
"scalar loops."));
static cl::opt<unsigned> ForceTargetMaxVectorInterleaveFactor(
"force-target-max-vector-interleave", cl::init(0), cl::Hidden,
cl::desc("A flag that overrides the target's max interleave factor for "
"vectorized loops."));
static cl::opt<unsigned> ForceTargetInstructionCost(
"force-target-instruction-cost", cl::init(0), cl::Hidden,
cl::desc("A flag that overrides the target's expected cost for "
"an instruction to a single constant value. Mostly "
"useful for getting consistent testing."));
static cl::opt<unsigned> SmallLoopCost(
"small-loop-cost", cl::init(20), cl::Hidden,
cl::desc(
"The cost of a loop that is considered 'small' by the interleaver."));
static cl::opt<bool> LoopVectorizeWithBlockFrequency(
"loop-vectorize-with-block-frequency", cl::init(true), cl::Hidden,
cl::desc("Enable the use of the block frequency analysis to access PGO "
"heuristics minimizing code growth in cold regions and being more "
"aggressive in hot regions."));
// Runtime interleave loops for load/store throughput.
static cl::opt<bool> EnableLoadStoreRuntimeInterleave(
"enable-loadstore-runtime-interleave", cl::init(true), cl::Hidden,
cl::desc(
"Enable runtime interleaving until load/store ports are saturated"));
/// The number of stores in a loop that are allowed to need predication.
static cl::opt<unsigned> NumberOfStoresToPredicate(
"vectorize-num-stores-pred", cl::init(1), cl::Hidden,
cl::desc("Max number of stores to be predicated behind an if."));
static cl::opt<bool> EnableIndVarRegisterHeur(
"enable-ind-var-reg-heur", cl::init(true), cl::Hidden,
cl::desc("Count the induction variable only once when interleaving"));
static cl::opt<bool> EnableCondStoresVectorization(
"enable-cond-stores-vec", cl::init(true), cl::Hidden,
cl::desc("Enable if predication of stores during vectorization."));
static cl::opt<unsigned> MaxNestedScalarReductionIC(
"max-nested-scalar-reduction-interleave", cl::init(2), cl::Hidden,
cl::desc("The maximum interleave count to use when interleaving a scalar "
"reduction in a nested loop."));
cl::opt<bool> EnableVPlanNativePath(
"enable-vplan-native-path", cl::init(false), cl::Hidden,
cl::desc("Enable VPlan-native vectorization path with "
"support for outer loop vectorization."));
// FIXME: Remove this switch once we have divergence analysis. Currently we
// assume divergent non-backedge branches when this switch is true.
cl::opt<bool> EnableVPlanPredication(
"enable-vplan-predication", cl::init(false), cl::Hidden,
cl::desc("Enable VPlan-native vectorization path predicator with "
"support for outer loop vectorization."));
// This flag enables the stress testing of the VPlan H-CFG construction in the
// VPlan-native vectorization path. It must be used in conjuction with
// -enable-vplan-native-path. -vplan-verify-hcfg can also be used to enable the
// verification of the H-CFGs built.
static cl::opt<bool> VPlanBuildStressTest(
"vplan-build-stress-test", cl::init(false), cl::Hidden,
cl::desc(
"Build VPlan for every supported loop nest in the function and bail "
"out right after the build (stress test the VPlan H-CFG construction "
"in the VPlan-native vectorization path)."));
/// A helper function for converting Scalar types to vector types.
/// If the incoming type is void, we return void. If the VF is 1, we return
/// the scalar type.
static Type *ToVectorTy(Type *Scalar, unsigned VF) {
if (Scalar->isVoidTy() || VF == 1)
return Scalar;
return VectorType::get(Scalar, VF);
}
/// A helper function that returns the type of loaded or stored value.
static Type *getMemInstValueType(Value *I) {
assert((isa<LoadInst>(I) || isa<StoreInst>(I)) &&
"Expected Load or Store instruction");
if (auto *LI = dyn_cast<LoadInst>(I))
return LI->getType();
return cast<StoreInst>(I)->getValueOperand()->getType();
}
/// A helper function that returns true if the given type is irregular. The
/// type is irregular if its allocated size doesn't equal the store size of an
/// element of the corresponding vector type at the given vectorization factor.
static bool hasIrregularType(Type *Ty, const DataLayout &DL, unsigned VF) {
// Determine if an array of VF elements of type Ty is "bitcast compatible"
// with a <VF x Ty> vector.
if (VF > 1) {
auto *VectorTy = VectorType::get(Ty, VF);
return VF * DL.getTypeAllocSize(Ty) != DL.getTypeStoreSize(VectorTy);
}
// If the vectorization factor is one, we just check if an array of type Ty
// requires padding between elements.
return DL.getTypeAllocSizeInBits(Ty) != DL.getTypeSizeInBits(Ty);
}
/// A helper function that returns the reciprocal of the block probability of
/// predicated blocks. If we return X, we are assuming the predicated block
/// will execute once for every X iterations of the loop header.
///
/// TODO: We should use actual block probability here, if available. Currently,
/// we always assume predicated blocks have a 50% chance of executing.
static unsigned getReciprocalPredBlockProb() { return 2; }
/// A helper function that adds a 'fast' flag to floating-point operations.
static Value *addFastMathFlag(Value *V) {
if (isa<FPMathOperator>(V))
cast<Instruction>(V)->setFastMathFlags(FastMathFlags::getFast());
return V;
}
static Value *addFastMathFlag(Value *V, FastMathFlags FMF) {
if (isa<FPMathOperator>(V))
cast<Instruction>(V)->setFastMathFlags(FMF);
return V;
}
/// A helper function that returns an integer or floating-point constant with
/// value C.
static Constant *getSignedIntOrFpConstant(Type *Ty, int64_t C) {
return Ty->isIntegerTy() ? ConstantInt::getSigned(Ty, C)
: ConstantFP::get(Ty, C);
}
namespace llvm {
/// InnerLoopVectorizer vectorizes loops which contain only one basic
/// block to a specified vectorization factor (VF).
/// This class performs the widening of scalars into vectors, or multiple
/// scalars. This class also implements the following features:
/// * It inserts an epilogue loop for handling loops that don't have iteration
/// counts that are known to be a multiple of the vectorization factor.
/// * It handles the code generation for reduction variables.
/// * Scalarization (implementation using scalars) of un-vectorizable
/// instructions.
/// InnerLoopVectorizer does not perform any vectorization-legality
/// checks, and relies on the caller to check for the different legality
/// aspects. The InnerLoopVectorizer relies on the
/// LoopVectorizationLegality class to provide information about the induction
/// and reduction variables that were found to a given vectorization factor.
class InnerLoopVectorizer {
public:
InnerLoopVectorizer(Loop *OrigLoop, PredicatedScalarEvolution &PSE,
LoopInfo *LI, DominatorTree *DT,
const TargetLibraryInfo *TLI,
const TargetTransformInfo *TTI, AssumptionCache *AC,
OptimizationRemarkEmitter *ORE, unsigned VecWidth,
unsigned UnrollFactor, LoopVectorizationLegality *LVL,
LoopVectorizationCostModel *CM)
: OrigLoop(OrigLoop), PSE(PSE), LI(LI), DT(DT), TLI(TLI), TTI(TTI),
AC(AC), ORE(ORE), VF(VecWidth), UF(UnrollFactor),
Builder(PSE.getSE()->getContext()),
VectorLoopValueMap(UnrollFactor, VecWidth), Legal(LVL), Cost(CM) {}
virtual ~InnerLoopVectorizer() = default;
/// Create a new empty loop. Unlink the old loop and connect the new one.
/// Return the pre-header block of the new loop.
BasicBlock *createVectorizedLoopSkeleton();
/// Widen a single instruction within the innermost loop.
void widenInstruction(Instruction &I);
/// Fix the vectorized code, taking care of header phi's, live-outs, and more.
void fixVectorizedLoop();
// Return true if any runtime check is added.
bool areSafetyChecksAdded() { return AddedSafetyChecks; }
/// A type for vectorized values in the new loop. Each value from the
/// original loop, when vectorized, is represented by UF vector values in the
/// new unrolled loop, where UF is the unroll factor.
using VectorParts = SmallVector<Value *, 2>;
/// Vectorize a single PHINode in a block. This method handles the induction
/// variable canonicalization. It supports both VF = 1 for unrolled loops and
/// arbitrary length vectors.
void widenPHIInstruction(Instruction *PN, unsigned UF, unsigned VF);
/// A helper function to scalarize a single Instruction in the innermost loop.
/// Generates a sequence of scalar instances for each lane between \p MinLane
/// and \p MaxLane, times each part between \p MinPart and \p MaxPart,
/// inclusive..
void scalarizeInstruction(Instruction *Instr, const VPIteration &Instance,
bool IfPredicateInstr);
/// Widen an integer or floating-point induction variable \p IV. If \p Trunc
/// is provided, the integer induction variable will first be truncated to
/// the corresponding type.
void widenIntOrFpInduction(PHINode *IV, TruncInst *Trunc = nullptr);
/// getOrCreateVectorValue and getOrCreateScalarValue coordinate to generate a
/// vector or scalar value on-demand if one is not yet available. When
/// vectorizing a loop, we visit the definition of an instruction before its
/// uses. When visiting the definition, we either vectorize or scalarize the
/// instruction, creating an entry for it in the corresponding map. (In some
/// cases, such as induction variables, we will create both vector and scalar
/// entries.) Then, as we encounter uses of the definition, we derive values
/// for each scalar or vector use unless such a value is already available.
/// For example, if we scalarize a definition and one of its uses is vector,
/// we build the required vector on-demand with an insertelement sequence
/// when visiting the use. Otherwise, if the use is scalar, we can use the
/// existing scalar definition.
///
/// Return a value in the new loop corresponding to \p V from the original
/// loop at unroll index \p Part. If the value has already been vectorized,
/// the corresponding vector entry in VectorLoopValueMap is returned. If,
/// however, the value has a scalar entry in VectorLoopValueMap, we construct
/// a new vector value on-demand by inserting the scalar values into a vector
/// with an insertelement sequence. If the value has been neither vectorized
/// nor scalarized, it must be loop invariant, so we simply broadcast the
/// value into a vector.
Value *getOrCreateVectorValue(Value *V, unsigned Part);
/// Return a value in the new loop corresponding to \p V from the original
/// loop at unroll and vector indices \p Instance. If the value has been
/// vectorized but not scalarized, the necessary extractelement instruction
/// will be generated.
Value *getOrCreateScalarValue(Value *V, const VPIteration &Instance);
/// Construct the vector value of a scalarized value \p V one lane at a time.
void packScalarIntoVectorValue(Value *V, const VPIteration &Instance);
/// Try to vectorize the interleaved access group that \p Instr belongs to,
/// optionally masking the vector operations if \p BlockInMask is non-null.
void vectorizeInterleaveGroup(Instruction *Instr,
VectorParts *BlockInMask = nullptr);
/// Vectorize Load and Store instructions, optionally masking the vector
/// operations if \p BlockInMask is non-null.
void vectorizeMemoryInstruction(Instruction *Instr,
VectorParts *BlockInMask = nullptr);
/// Set the debug location in the builder using the debug location in
/// the instruction.
void setDebugLocFromInst(IRBuilder<> &B, const Value *Ptr);
/// Fix the non-induction PHIs in the OrigPHIsToFix vector.
void fixNonInductionPHIs(void);
protected:
friend class LoopVectorizationPlanner;
/// A small list of PHINodes.
using PhiVector = SmallVector<PHINode *, 4>;
/// A type for scalarized values in the new loop. Each value from the
/// original loop, when scalarized, is represented by UF x VF scalar values
/// in the new unrolled loop, where UF is the unroll factor and VF is the
/// vectorization factor.
using ScalarParts = SmallVector<SmallVector<Value *, 4>, 2>;
/// Set up the values of the IVs correctly when exiting the vector loop.
void fixupIVUsers(PHINode *OrigPhi, const InductionDescriptor &II,
Value *CountRoundDown, Value *EndValue,
BasicBlock *MiddleBlock);
/// Create a new induction variable inside L.
PHINode *createInductionVariable(Loop *L, Value *Start, Value *End,
Value *Step, Instruction *DL);
/// Handle all cross-iteration phis in the header.
void fixCrossIterationPHIs();
/// Fix a first-order recurrence. This is the second phase of vectorizing
/// this phi node.
void fixFirstOrderRecurrence(PHINode *Phi);
/// Fix a reduction cross-iteration phi. This is the second phase of
/// vectorizing this phi node.
void fixReduction(PHINode *Phi);
/// The Loop exit block may have single value PHI nodes with some
/// incoming value. While vectorizing we only handled real values
/// that were defined inside the loop and we should have one value for
/// each predecessor of its parent basic block. See PR14725.
void fixLCSSAPHIs();
/// Iteratively sink the scalarized operands of a predicated instruction into
/// the block that was created for it.
void sinkScalarOperands(Instruction *PredInst);
/// Shrinks vector element sizes to the smallest bitwidth they can be legally
/// represented as.
void truncateToMinimalBitwidths();
/// Insert the new loop to the loop hierarchy and pass manager
/// and update the analysis passes.
void updateAnalysis();
/// Create a broadcast instruction. This method generates a broadcast
/// instruction (shuffle) for loop invariant values and for the induction
/// value. If this is the induction variable then we extend it to N, N+1, ...
/// this is needed because each iteration in the loop corresponds to a SIMD
/// element.
virtual Value *getBroadcastInstrs(Value *V);
/// This function adds (StartIdx, StartIdx + Step, StartIdx + 2*Step, ...)
/// to each vector element of Val. The sequence starts at StartIndex.
/// \p Opcode is relevant for FP induction variable.
virtual Value *getStepVector(Value *Val, int StartIdx, Value *Step,
Instruction::BinaryOps Opcode =
Instruction::BinaryOpsEnd);
/// Compute scalar induction steps. \p ScalarIV is the scalar induction
/// variable on which to base the steps, \p Step is the size of the step, and
/// \p EntryVal is the value from the original loop that maps to the steps.
/// Note that \p EntryVal doesn't have to be an induction variable - it
/// can also be a truncate instruction.
void buildScalarSteps(Value *ScalarIV, Value *Step, Instruction *EntryVal,
const InductionDescriptor &ID);
/// Create a vector induction phi node based on an existing scalar one. \p
/// EntryVal is the value from the original loop that maps to the vector phi
/// node, and \p Step is the loop-invariant step. If \p EntryVal is a
/// truncate instruction, instead of widening the original IV, we widen a
/// version of the IV truncated to \p EntryVal's type.
void createVectorIntOrFpInductionPHI(const InductionDescriptor &II,
Value *Step, Instruction *EntryVal);
/// Returns true if an instruction \p I should be scalarized instead of
/// vectorized for the chosen vectorization factor.
bool shouldScalarizeInstruction(Instruction *I) const;
/// Returns true if we should generate a scalar version of \p IV.
bool needsScalarInduction(Instruction *IV) const;
/// If there is a cast involved in the induction variable \p ID, which should
/// be ignored in the vectorized loop body, this function records the
/// VectorLoopValue of the respective Phi also as the VectorLoopValue of the
/// cast. We had already proved that the casted Phi is equal to the uncasted
/// Phi in the vectorized loop (under a runtime guard), and therefore
/// there is no need to vectorize the cast - the same value can be used in the
/// vector loop for both the Phi and the cast.
/// If \p VectorLoopValue is a scalarized value, \p Lane is also specified,
/// Otherwise, \p VectorLoopValue is a widened/vectorized value.
///
/// \p EntryVal is the value from the original loop that maps to the vector
/// phi node and is used to distinguish what is the IV currently being
/// processed - original one (if \p EntryVal is a phi corresponding to the
/// original IV) or the "newly-created" one based on the proof mentioned above
/// (see also buildScalarSteps() and createVectorIntOrFPInductionPHI()). In the
/// latter case \p EntryVal is a TruncInst and we must not record anything for
/// that IV, but it's error-prone to expect callers of this routine to care
/// about that, hence this explicit parameter.
void recordVectorLoopValueForInductionCast(const InductionDescriptor &ID,
const Instruction *EntryVal,
Value *VectorLoopValue,
unsigned Part,
unsigned Lane = UINT_MAX);
/// Generate a shuffle sequence that will reverse the vector Vec.
virtual Value *reverseVector(Value *Vec);
/// Returns (and creates if needed) the original loop trip count.
Value *getOrCreateTripCount(Loop *NewLoop);
/// Returns (and creates if needed) the trip count of the widened loop.
Value *getOrCreateVectorTripCount(Loop *NewLoop);
/// Returns a bitcasted value to the requested vector type.
/// Also handles bitcasts of vector<float> <-> vector<pointer> types.
Value *createBitOrPointerCast(Value *V, VectorType *DstVTy,
const DataLayout &DL);
/// Emit a bypass check to see if the vector trip count is zero, including if
/// it overflows.
void emitMinimumIterationCountCheck(Loop *L, BasicBlock *Bypass);
/// Emit a bypass check to see if all of the SCEV assumptions we've
/// had to make are correct.
void emitSCEVChecks(Loop *L, BasicBlock *Bypass);
/// Emit bypass checks to check any memory assumptions we may have made.
void emitMemRuntimeChecks(Loop *L, BasicBlock *Bypass);
/// Compute the transformed value of Index at offset StartValue using step
/// StepValue.
/// For integer induction, returns StartValue + Index * StepValue.
/// For pointer induction, returns StartValue[Index * StepValue].
/// FIXME: The newly created binary instructions should contain nsw/nuw
/// flags, which can be found from the original scalar operations.
Value *emitTransformedIndex(IRBuilder<> &B, Value *Index, ScalarEvolution *SE,
const DataLayout &DL,
const InductionDescriptor &ID) const;
/// Add additional metadata to \p To that was not present on \p Orig.
///
/// Currently this is used to add the noalias annotations based on the
/// inserted memchecks. Use this for instructions that are *cloned* into the
/// vector loop.
void addNewMetadata(Instruction *To, const Instruction *Orig);
/// Add metadata from one instruction to another.
///
/// This includes both the original MDs from \p From and additional ones (\see
/// addNewMetadata). Use this for *newly created* instructions in the vector
/// loop.
void addMetadata(Instruction *To, Instruction *From);
/// Similar to the previous function but it adds the metadata to a
/// vector of instructions.
void addMetadata(ArrayRef<Value *> To, Instruction *From);
/// The original loop.
Loop *OrigLoop;
/// A wrapper around ScalarEvolution used to add runtime SCEV checks. Applies
/// dynamic knowledge to simplify SCEV expressions and converts them to a
/// more usable form.
PredicatedScalarEvolution &PSE;
/// Loop Info.
LoopInfo *LI;
/// Dominator Tree.
DominatorTree *DT;
/// Alias Analysis.
AliasAnalysis *AA;
/// Target Library Info.
const TargetLibraryInfo *TLI;
/// Target Transform Info.
const TargetTransformInfo *TTI;
/// Assumption Cache.
AssumptionCache *AC;
/// Interface to emit optimization remarks.
OptimizationRemarkEmitter *ORE;
/// LoopVersioning. It's only set up (non-null) if memchecks were
/// used.
///
/// This is currently only used to add no-alias metadata based on the
/// memchecks. The actually versioning is performed manually.
std::unique_ptr<LoopVersioning> LVer;
/// The vectorization SIMD factor to use. Each vector will have this many
/// vector elements.
unsigned VF;
/// The vectorization unroll factor to use. Each scalar is vectorized to this
/// many different vector instructions.
unsigned UF;
/// The builder that we use
IRBuilder<> Builder;
// --- Vectorization state ---
/// The vector-loop preheader.
BasicBlock *LoopVectorPreHeader;
/// The scalar-loop preheader.
BasicBlock *LoopScalarPreHeader;
/// Middle Block between the vector and the scalar.
BasicBlock *LoopMiddleBlock;
/// The ExitBlock of the scalar loop.
BasicBlock *LoopExitBlock;
/// The vector loop body.
BasicBlock *LoopVectorBody;
/// The scalar loop body.
BasicBlock *LoopScalarBody;
/// A list of all bypass blocks. The first block is the entry of the loop.
SmallVector<BasicBlock *, 4> LoopBypassBlocks;
/// The new Induction variable which was added to the new block.
PHINode *Induction = nullptr;
/// The induction variable of the old basic block.
PHINode *OldInduction = nullptr;
/// Maps values from the original loop to their corresponding values in the
/// vectorized loop. A key value can map to either vector values, scalar
/// values or both kinds of values, depending on whether the key was
/// vectorized and scalarized.
VectorizerValueMap VectorLoopValueMap;
/// Store instructions that were predicated.
SmallVector<Instruction *, 4> PredicatedInstructions;
/// Trip count of the original loop.
Value *TripCount = nullptr;
/// Trip count of the widened loop (TripCount - TripCount % (VF*UF))
Value *VectorTripCount = nullptr;
/// The legality analysis.
LoopVectorizationLegality *Legal;
/// The profitablity analysis.
LoopVectorizationCostModel *Cost;
// Record whether runtime checks are added.
bool AddedSafetyChecks = false;
// Holds the end values for each induction variable. We save the end values
// so we can later fix-up the external users of the induction variables.
DenseMap<PHINode *, Value *> IVEndValues;
// Vector of original scalar PHIs whose corresponding widened PHIs need to be
// fixed up at the end of vector code generation.
SmallVector<PHINode *, 8> OrigPHIsToFix;
};
class InnerLoopUnroller : public InnerLoopVectorizer {
public:
InnerLoopUnroller(Loop *OrigLoop, PredicatedScalarEvolution &PSE,
LoopInfo *LI, DominatorTree *DT,
const TargetLibraryInfo *TLI,
const TargetTransformInfo *TTI, AssumptionCache *AC,
OptimizationRemarkEmitter *ORE, unsigned UnrollFactor,
LoopVectorizationLegality *LVL,
LoopVectorizationCostModel *CM)
: InnerLoopVectorizer(OrigLoop, PSE, LI, DT, TLI, TTI, AC, ORE, 1,
UnrollFactor, LVL, CM) {}
private:
Value *getBroadcastInstrs(Value *V) override;
Value *getStepVector(Value *Val, int StartIdx, Value *Step,
Instruction::BinaryOps Opcode =
Instruction::BinaryOpsEnd) override;
Value *reverseVector(Value *Vec) override;
};
} // end namespace llvm
/// Look for a meaningful debug location on the instruction or it's
/// operands.
static Instruction *getDebugLocFromInstOrOperands(Instruction *I) {
if (!I)
return I;
DebugLoc Empty;
if (I->getDebugLoc() != Empty)
return I;
for (User::op_iterator OI = I->op_begin(), OE = I->op_end(); OI != OE; ++OI) {
if (Instruction *OpInst = dyn_cast<Instruction>(*OI))
if (OpInst->getDebugLoc() != Empty)
return OpInst;
}
return I;
}
void InnerLoopVectorizer::setDebugLocFromInst(IRBuilder<> &B, const Value *Ptr) {
if (const Instruction *Inst = dyn_cast_or_null<Instruction>(Ptr)) {
const DILocation *DIL = Inst->getDebugLoc();
if (DIL && Inst->getFunction()->isDebugInfoForProfiling() &&
!isa<DbgInfoIntrinsic>(Inst)) {
auto NewDIL = DIL->cloneByMultiplyingDuplicationFactor(UF * VF);
if (NewDIL)
B.SetCurrentDebugLocation(NewDIL.getValue());
else
LLVM_DEBUG(dbgs()
<< "Failed to create new discriminator: "
<< DIL->getFilename() << " Line: " << DIL->getLine());
}
else
B.SetCurrentDebugLocation(DIL);
} else
B.SetCurrentDebugLocation(DebugLoc());
}
#ifndef NDEBUG
/// \return string containing a file name and a line # for the given loop.
static std::string getDebugLocString(const Loop *L) {
std::string Result;
if (L) {
raw_string_ostream OS(Result);
if (const DebugLoc LoopDbgLoc = L->getStartLoc())
LoopDbgLoc.print(OS);
else
// Just print the module name.
OS << L->getHeader()->getParent()->getParent()->getModuleIdentifier();
OS.flush();
}
return Result;
}
#endif
void InnerLoopVectorizer::addNewMetadata(Instruction *To,
const Instruction *Orig) {
// If the loop was versioned with memchecks, add the corresponding no-alias
// metadata.
if (LVer && (isa<LoadInst>(Orig) || isa<StoreInst>(Orig)))
LVer->annotateInstWithNoAlias(To, Orig);
}
void InnerLoopVectorizer::addMetadata(Instruction *To,
Instruction *From) {
propagateMetadata(To, From);
addNewMetadata(To, From);
}
void InnerLoopVectorizer::addMetadata(ArrayRef<Value *> To,
Instruction *From) {
for (Value *V : To) {
if (Instruction *I = dyn_cast<Instruction>(V))
addMetadata(I, From);
}
}
namespace llvm {
/// LoopVectorizationCostModel - estimates the expected speedups due to
/// vectorization.
/// In many cases vectorization is not profitable. This can happen because of
/// a number of reasons. In this class we mainly attempt to predict the
/// expected speedup/slowdowns due to the supported instruction set. We use the
/// TargetTransformInfo to query the different backends for the cost of
/// different operations.
class LoopVectorizationCostModel {
public:
LoopVectorizationCostModel(Loop *L, PredicatedScalarEvolution &PSE,
LoopInfo *LI, LoopVectorizationLegality *Legal,
const TargetTransformInfo &TTI,
const TargetLibraryInfo *TLI, DemandedBits *DB,
AssumptionCache *AC,
OptimizationRemarkEmitter *ORE, const Function *F,
const LoopVectorizeHints *Hints,
InterleavedAccessInfo &IAI)
: TheLoop(L), PSE(PSE), LI(LI), Legal(Legal), TTI(TTI), TLI(TLI), DB(DB),
AC(AC), ORE(ORE), TheFunction(F), Hints(Hints), InterleaveInfo(IAI) {}
/// \return An upper bound for the vectorization factor, or None if
/// vectorization and interleaving should be avoided up front.
Optional<unsigned> computeMaxVF(bool OptForSize);
/// \return The most profitable vectorization factor and the cost of that VF.
/// This method checks every power of two up to MaxVF. If UserVF is not ZERO
/// then this vectorization factor will be selected if vectorization is
/// possible.
VectorizationFactor selectVectorizationFactor(unsigned MaxVF);
/// Setup cost-based decisions for user vectorization factor.
void selectUserVectorizationFactor(unsigned UserVF) {
collectUniformsAndScalars(UserVF);
collectInstsToScalarize(UserVF);
}
/// \return The size (in bits) of the smallest and widest types in the code
/// that needs to be vectorized. We ignore values that remain scalar such as
/// 64 bit loop indices.
std::pair<unsigned, unsigned> getSmallestAndWidestTypes();
/// \return The desired interleave count.
/// If interleave count has been specified by metadata it will be returned.
/// Otherwise, the interleave count is computed and returned. VF and LoopCost
/// are the selected vectorization factor and the cost of the selected VF.
unsigned selectInterleaveCount(bool OptForSize, unsigned VF,
unsigned LoopCost);
/// Memory access instruction may be vectorized in more than one way.
/// Form of instruction after vectorization depends on cost.
/// This function takes cost-based decisions for Load/Store instructions
/// and collects them in a map. This decisions map is used for building
/// the lists of loop-uniform and loop-scalar instructions.
/// The calculated cost is saved with widening decision in order to
/// avoid redundant calculations.
void setCostBasedWideningDecision(unsigned VF);
/// A struct that represents some properties of the register usage
/// of a loop.
struct RegisterUsage {
/// Holds the number of loop invariant values that are used in the loop.
unsigned LoopInvariantRegs;
/// Holds the maximum number of concurrent live intervals in the loop.
unsigned MaxLocalUsers;
};
/// \return Returns information about the register usages of the loop for the
/// given vectorization factors.
SmallVector<RegisterUsage, 8> calculateRegisterUsage(ArrayRef<unsigned> VFs);
/// Collect values we want to ignore in the cost model.
void collectValuesToIgnore();
/// \returns The smallest bitwidth each instruction can be represented with.
/// The vector equivalents of these instructions should be truncated to this
/// type.
const MapVector<Instruction *, uint64_t> &getMinimalBitwidths() const {
return MinBWs;
}
/// \returns True if it is more profitable to scalarize instruction \p I for
/// vectorization factor \p VF.
bool isProfitableToScalarize(Instruction *I, unsigned VF) const {
assert(VF > 1 && "Profitable to scalarize relevant only for VF > 1.");
// Cost model is not run in the VPlan-native path - return conservative
// result until this changes.
if (EnableVPlanNativePath)
return false;
auto Scalars = InstsToScalarize.find(VF);
assert(Scalars != InstsToScalarize.end() &&
"VF not yet analyzed for scalarization profitability");
return Scalars->second.find(I) != Scalars->second.end();
}
/// Returns true if \p I is known to be uniform after vectorization.
bool isUniformAfterVectorization(Instruction *I, unsigned VF) const {
if (VF == 1)
return true;
// Cost model is not run in the VPlan-native path - return conservative
// result until this changes.
if (EnableVPlanNativePath)
return false;
auto UniformsPerVF = Uniforms.find(VF);
assert(UniformsPerVF != Uniforms.end() &&
"VF not yet analyzed for uniformity");
return UniformsPerVF->second.find(I) != UniformsPerVF->second.end();
}
/// Returns true if \p I is known to be scalar after vectorization.
bool isScalarAfterVectorization(Instruction *I, unsigned VF) const {
if (VF == 1)
return true;
// Cost model is not run in the VPlan-native path - return conservative
// result until this changes.
if (EnableVPlanNativePath)
return false;
auto ScalarsPerVF = Scalars.find(VF);
assert(ScalarsPerVF != Scalars.end() &&
"Scalar values are not calculated for VF");
return ScalarsPerVF->second.find(I) != ScalarsPerVF->second.end();
}
/// \returns True if instruction \p I can be truncated to a smaller bitwidth
/// for vectorization factor \p VF.
bool canTruncateToMinimalBitwidth(Instruction *I, unsigned VF) const {
return VF > 1 && MinBWs.find(I) != MinBWs.end() &&
!isProfitableToScalarize(I, VF) &&
!isScalarAfterVectorization(I, VF);
}
/// Decision that was taken during cost calculation for memory instruction.
enum InstWidening {
CM_Unknown,
CM_Widen, // For consecutive accesses with stride +1.
CM_Widen_Reverse, // For consecutive accesses with stride -1.
CM_Interleave,
CM_GatherScatter,
CM_Scalarize
};
/// Save vectorization decision \p W and \p Cost taken by the cost model for
/// instruction \p I and vector width \p VF.
void setWideningDecision(Instruction *I, unsigned VF, InstWidening W,
unsigned Cost) {
assert(VF >= 2 && "Expected VF >=2");
WideningDecisions[std::make_pair(I, VF)] = std::make_pair(W, Cost);
}
/// Save vectorization decision \p W and \p Cost taken by the cost model for
/// interleaving group \p Grp and vector width \p VF.
void setWideningDecision(const InterleaveGroup<Instruction> *Grp, unsigned VF,
InstWidening W, unsigned Cost) {
assert(VF >= 2 && "Expected VF >=2");
/// Broadcast this decicion to all instructions inside the group.
/// But the cost will be assigned to one instruction only.
for (unsigned i = 0; i < Grp->getFactor(); ++i) {
if (auto *I = Grp->getMember(i)) {
if (Grp->getInsertPos() == I)
WideningDecisions[std::make_pair(I, VF)] = std::make_pair(W, Cost);
else
WideningDecisions[std::make_pair(I, VF)] = std::make_pair(W, 0);
}
}
}
/// Return the cost model decision for the given instruction \p I and vector
/// width \p VF. Return CM_Unknown if this instruction did not pass
/// through the cost modeling.
InstWidening getWideningDecision(Instruction *I, unsigned VF) {
assert(VF >= 2 && "Expected VF >=2");
// Cost model is not run in the VPlan-native path - return conservative
// result until this changes.
if (EnableVPlanNativePath)
return CM_GatherScatter;
std::pair<Instruction *, unsigned> InstOnVF = std::make_pair(I, VF);
auto Itr = WideningDecisions.find(InstOnVF);
if (Itr == WideningDecisions.end())
return CM_Unknown;
return Itr->second.first;
}
/// Return the vectorization cost for the given instruction \p I and vector
/// width \p VF.
unsigned getWideningCost(Instruction *I, unsigned VF) {
assert(VF >= 2 && "Expected VF >=2");
std::pair<Instruction *, unsigned> InstOnVF = std::make_pair(I, VF);
assert(WideningDecisions.find(InstOnVF) != WideningDecisions.end() &&
"The cost is not calculated");
return WideningDecisions[InstOnVF].second;
}
/// Return True if instruction \p I is an optimizable truncate whose operand
/// is an induction variable. Such a truncate will be removed by adding a new
/// induction variable with the destination type.
bool isOptimizableIVTruncate(Instruction *I, unsigned VF) {
// If the instruction is not a truncate, return false.
auto *Trunc = dyn_cast<TruncInst>(I);
if (!Trunc)
return false;
// Get the source and destination types of the truncate.
Type *SrcTy = ToVectorTy(cast<CastInst>(I)->getSrcTy(), VF);
Type *DestTy = ToVectorTy(cast<CastInst>(I)->getDestTy(), VF);
// If the truncate is free for the given types, return false. Replacing a
// free truncate with an induction variable would add an induction variable
// update instruction to each iteration of the loop. We exclude from this
// check the primary induction variable since it will need an update
// instruction regardless.
Value *Op = Trunc->getOperand(0);
if (Op != Legal->getPrimaryInduction() && TTI.isTruncateFree(SrcTy, DestTy))
return false;
// If the truncated value is not an induction variable, return false.
return Legal->isInductionPhi(Op);
}
/// Collects the instructions to scalarize for each predicated instruction in
/// the loop.
void collectInstsToScalarize(unsigned VF);
/// Collect Uniform and Scalar values for the given \p VF.
/// The sets depend on CM decision for Load/Store instructions
/// that may be vectorized as interleave, gather-scatter or scalarized.
void collectUniformsAndScalars(unsigned VF) {
// Do the analysis once.
if (VF == 1 || Uniforms.find(VF) != Uniforms.end())
return;
setCostBasedWideningDecision(VF);
collectLoopUniforms(VF);
collectLoopScalars(VF);
}
/// Returns true if the target machine supports masked store operation
/// for the given \p DataType and kind of access to \p Ptr.
bool isLegalMaskedStore(Type *DataType, Value *Ptr) {
return Legal->isConsecutivePtr(Ptr) && TTI.isLegalMaskedStore(DataType);
}
/// Returns true if the target machine supports masked load operation
/// for the given \p DataType and kind of access to \p Ptr.
bool isLegalMaskedLoad(Type *DataType, Value *Ptr) {
return Legal->isConsecutivePtr(Ptr) && TTI.isLegalMaskedLoad(DataType);
}
/// Returns true if the target machine supports masked scatter operation
/// for the given \p DataType.
bool isLegalMaskedScatter(Type *DataType) {
return TTI.isLegalMaskedScatter(DataType);
}
/// Returns true if the target machine supports masked gather operation
/// for the given \p DataType.
bool isLegalMaskedGather(Type *DataType) {
return TTI.isLegalMaskedGather(DataType);
}
/// Returns true if the target machine can represent \p V as a masked gather
/// or scatter operation.
bool isLegalGatherOrScatter(Value *V) {
bool LI = isa<LoadInst>(V);
bool SI = isa<StoreInst>(V);
if (!LI && !SI)
return false;
auto *Ty = getMemInstValueType(V);
return (LI && isLegalMaskedGather(Ty)) || (SI && isLegalMaskedScatter(Ty));
}
/// Returns true if \p I is an instruction that will be scalarized with
/// predication. Such instructions include conditional stores and
/// instructions that may divide by zero.
/// If a non-zero VF has been calculated, we check if I will be scalarized
/// predication for that VF.
bool isScalarWithPredication(Instruction *I, unsigned VF = 1);
// Returns true if \p I is an instruction that will be predicated either
// through scalar predication or masked load/store or masked gather/scatter.
// Superset of instructions that return true for isScalarWithPredication.
bool isPredicatedInst(Instruction *I) {
if (!blockNeedsPredication(I->getParent()))
return false;
// Loads and stores that need some form of masked operation are predicated
// instructions.
if (isa<LoadInst>(I) || isa<StoreInst>(I))
return Legal->isMaskRequired(I);
return isScalarWithPredication(I);
}
/// Returns true if \p I is a memory instruction with consecutive memory
/// access that can be widened.
bool memoryInstructionCanBeWidened(Instruction *I, unsigned VF = 1);
/// Returns true if \p I is a memory instruction in an interleaved-group
/// of memory accesses that can be vectorized with wide vector loads/stores
/// and shuffles.
bool interleavedAccessCanBeWidened(Instruction *I, unsigned VF = 1);
/// Check if \p Instr belongs to any interleaved access group.
bool isAccessInterleaved(Instruction *Instr) {
return InterleaveInfo.isInterleaved(Instr);
}
/// Get the interleaved access group that \p Instr belongs to.
const InterleaveGroup<Instruction> *
getInterleavedAccessGroup(Instruction *Instr) {
return InterleaveInfo.getInterleaveGroup(Instr);
}
/// Returns true if an interleaved group requires a scalar iteration
/// to handle accesses with gaps, and there is nothing preventing us from
/// creating a scalar epilogue.
bool requiresScalarEpilogue() const {
return IsScalarEpilogueAllowed && InterleaveInfo.requiresScalarEpilogue();
}
/// Returns true if a scalar epilogue is not allowed due to optsize.
bool isScalarEpilogueAllowed() const { return IsScalarEpilogueAllowed; }
/// Returns true if all loop blocks should be masked to fold tail loop.
bool foldTailByMasking() const { return FoldTailByMasking; }
bool blockNeedsPredication(BasicBlock *BB) {
return foldTailByMasking() || Legal->blockNeedsPredication(BB);
}
private:
unsigned NumPredStores = 0;
/// \return An upper bound for the vectorization factor, larger than zero.
/// One is returned if vectorization should best be avoided due to cost.
unsigned computeFeasibleMaxVF(bool OptForSize, unsigned ConstTripCount);
/// The vectorization cost is a combination of the cost itself and a boolean
/// indicating whether any of the contributing operations will actually
/// operate on
/// vector values after type legalization in the backend. If this latter value
/// is
/// false, then all operations will be scalarized (i.e. no vectorization has
/// actually taken place).
using VectorizationCostTy = std::pair<unsigned, bool>;
/// Returns the expected execution cost. The unit of the cost does
/// not matter because we use the 'cost' units to compare different
/// vector widths. The cost that is returned is *not* normalized by
/// the factor width.
VectorizationCostTy expectedCost(unsigned VF);
/// Returns the execution time cost of an instruction for a given vector
/// width. Vector width of one means scalar.
VectorizationCostTy getInstructionCost(Instruction *I, unsigned VF);
/// The cost-computation logic from getInstructionCost which provides
/// the vector type as an output parameter.
unsigned getInstructionCost(Instruction *I, unsigned VF, Type *&VectorTy);
/// Calculate vectorization cost of memory instruction \p I.
unsigned getMemoryInstructionCost(Instruction *I, unsigned VF);
/// The cost computation for scalarized memory instruction.
unsigned getMemInstScalarizationCost(Instruction *I, unsigned VF);
/// The cost computation for interleaving group of memory instructions.
unsigned getInterleaveGroupCost(Instruction *I, unsigned VF);
/// The cost computation for Gather/Scatter instruction.
unsigned getGatherScatterCost(Instruction *I, unsigned VF);
/// The cost computation for widening instruction \p I with consecutive
/// memory access.
unsigned getConsecutiveMemOpCost(Instruction *I, unsigned VF);
/// The cost calculation for Load/Store instruction \p I with uniform pointer -
/// Load: scalar load + broadcast.
/// Store: scalar store + (loop invariant value stored? 0 : extract of last
/// element)
unsigned getUniformMemOpCost(Instruction *I, unsigned VF);
/// Returns whether the instruction is a load or store and will be a emitted
/// as a vector operation.
bool isConsecutiveLoadOrStore(Instruction *I);
/// Returns true if an artificially high cost for emulated masked memrefs
/// should be used.
bool useEmulatedMaskMemRefHack(Instruction *I);
/// Create an analysis remark that explains why vectorization failed
///
/// \p RemarkName is the identifier for the remark. \return the remark object
/// that can be streamed to.
OptimizationRemarkAnalysis createMissedAnalysis(StringRef RemarkName) {
return createLVMissedAnalysis(Hints->vectorizeAnalysisPassName(),
RemarkName, TheLoop);
}
/// Map of scalar integer values to the smallest bitwidth they can be legally
/// represented as. The vector equivalents of these values should be truncated
/// to this type.
MapVector<Instruction *, uint64_t> MinBWs;
/// A type representing the costs for instructions if they were to be
/// scalarized rather than vectorized. The entries are Instruction-Cost
/// pairs.
using ScalarCostsTy = DenseMap<Instruction *, unsigned>;
/// A set containing all BasicBlocks that are known to present after
/// vectorization as a predicated block.
SmallPtrSet<BasicBlock *, 4> PredicatedBBsAfterVectorization;
/// Records whether it is allowed to have the original scalar loop execute at
/// least once. This may be needed as a fallback loop in case runtime
/// aliasing/dependence checks fail, or to handle the tail/remainder
/// iterations when the trip count is unknown or doesn't divide by the VF,
/// or as a peel-loop to handle gaps in interleave-groups.
/// Under optsize and when the trip count is very small we don't allow any
/// iterations to execute in the scalar loop.
bool IsScalarEpilogueAllowed = true;
/// All blocks of loop are to be masked to fold tail of scalar iterations.
bool FoldTailByMasking = false;
/// A map holding scalar costs for different vectorization factors. The
/// presence of a cost for an instruction in the mapping indicates that the
/// instruction will be scalarized when vectorizing with the associated
/// vectorization factor. The entries are VF-ScalarCostTy pairs.
DenseMap<unsigned, ScalarCostsTy> InstsToScalarize;
/// Holds the instructions known to be uniform after vectorization.
/// The data is collected per VF.
DenseMap<unsigned, SmallPtrSet<Instruction *, 4>> Uniforms;
/// Holds the instructions known to be scalar after vectorization.
/// The data is collected per VF.
DenseMap<unsigned, SmallPtrSet<Instruction *, 4>> Scalars;
/// Holds the instructions (address computations) that are forced to be
/// scalarized.
DenseMap<unsigned, SmallPtrSet<Instruction *, 4>> ForcedScalars;
/// Returns the expected difference in cost from scalarizing the expression
/// feeding a predicated instruction \p PredInst. The instructions to
/// scalarize and their scalar costs are collected in \p ScalarCosts. A
/// non-negative return value implies the expression will be scalarized.
/// Currently, only single-use chains are considered for scalarization.
int computePredInstDiscount(Instruction *PredInst, ScalarCostsTy &ScalarCosts,
unsigned VF);
/// Collect the instructions that are uniform after vectorization. An
/// instruction is uniform if we represent it with a single scalar value in
/// the vectorized loop corresponding to each vector iteration. Examples of
/// uniform instructions include pointer operands of consecutive or
/// interleaved memory accesses. Note that although uniformity implies an
/// instruction will be scalar, the reverse is not true. In general, a
/// scalarized instruction will be represented by VF scalar values in the
/// vectorized loop, each corresponding to an iteration of the original
/// scalar loop.
void collectLoopUniforms(unsigned VF);
/// Collect the instructions that are scalar after vectorization. An
/// instruction is scalar if it is known to be uniform or will be scalarized
/// during vectorization. Non-uniform scalarized instructions will be
/// represented by VF values in the vectorized loop, each corresponding to an
/// iteration of the original scalar loop.
void collectLoopScalars(unsigned VF);
/// Keeps cost model vectorization decision and cost for instructions.
/// Right now it is used for memory instructions only.
using DecisionList = DenseMap<std::pair<Instruction *, unsigned>,
std::pair<InstWidening, unsigned>>;
DecisionList WideningDecisions;
public:
/// The loop that we evaluate.
Loop *TheLoop;
/// Predicated scalar evolution analysis.
PredicatedScalarEvolution &PSE;
/// Loop Info analysis.
LoopInfo *LI;
/// Vectorization legality.
LoopVectorizationLegality *Legal;
/// Vector target information.
const TargetTransformInfo &TTI;
/// Target Library Info.
const TargetLibraryInfo *TLI;
/// Demanded bits analysis.
DemandedBits *DB;
/// Assumption cache.
AssumptionCache *AC;
/// Interface to emit optimization remarks.
OptimizationRemarkEmitter *ORE;
const Function *TheFunction;
/// Loop Vectorize Hint.
const LoopVectorizeHints *Hints;
/// The interleave access information contains groups of interleaved accesses
/// with the same stride and close to each other.
InterleavedAccessInfo &InterleaveInfo;
/// Values to ignore in the cost model.
SmallPtrSet<const Value *, 16> ValuesToIgnore;
/// Values to ignore in the cost model when VF > 1.
SmallPtrSet<const Value *, 16> VecValuesToIgnore;
};
} // end namespace llvm
// Return true if \p OuterLp is an outer loop annotated with hints for explicit
// vectorization. The loop needs to be annotated with #pragma omp simd
// simdlen(#) or #pragma clang vectorize(enable) vectorize_width(#). If the
// vector length information is not provided, vectorization is not considered
// explicit. Interleave hints are not allowed either. These limitations will be
// relaxed in the future.
// Please, note that we are currently forced to abuse the pragma 'clang
// vectorize' semantics. This pragma provides *auto-vectorization hints*
// (i.e., LV must check that vectorization is legal) whereas pragma 'omp simd'
// provides *explicit vectorization hints* (LV can bypass legal checks and
// assume that vectorization is legal). However, both hints are implemented
// using the same metadata (llvm.loop.vectorize, processed by
// LoopVectorizeHints). This will be fixed in the future when the native IR
// representation for pragma 'omp simd' is introduced.
static bool isExplicitVecOuterLoop(Loop *OuterLp,
OptimizationRemarkEmitter *ORE) {
assert(!OuterLp->empty() && "This is not an outer loop");
LoopVectorizeHints Hints(OuterLp, true /*DisableInterleaving*/, *ORE);
// Only outer loops with an explicit vectorization hint are supported.
// Unannotated outer loops are ignored.
if (Hints.getForce() == LoopVectorizeHints::FK_Undefined)
return false;
Function *Fn = OuterLp->getHeader()->getParent();
if (!Hints.allowVectorization(Fn, OuterLp,
true /*VectorizeOnlyWhenForced*/)) {
LLVM_DEBUG(dbgs() << "LV: Loop hints prevent outer loop vectorization.\n");
return false;
}
if (Hints.getInterleave() > 1) {
// TODO: Interleave support is future work.
LLVM_DEBUG(dbgs() << "LV: Not vectorizing: Interleave is not supported for "
"outer loops.\n");
Hints.emitRemarkWithHints();
return false;
}
return true;
}
static void collectSupportedLoops(Loop &L, LoopInfo *LI,
OptimizationRemarkEmitter *ORE,
SmallVectorImpl<Loop *> &V) {
// Collect inner loops and outer loops without irreducible control flow. For
// now, only collect outer loops that have explicit vectorization hints. If we
// are stress testing the VPlan H-CFG construction, we collect the outermost
// loop of every loop nest.
if (L.empty() || VPlanBuildStressTest ||
(EnableVPlanNativePath && isExplicitVecOuterLoop(&L, ORE))) {
LoopBlocksRPO RPOT(&L);
RPOT.perform(LI);
if (!containsIrreducibleCFG<const BasicBlock *>(RPOT, *LI)) {
V.push_back(&L);
// TODO: Collect inner loops inside marked outer loops in case
// vectorization fails for the outer loop. Do not invoke
// 'containsIrreducibleCFG' again for inner loops when the outer loop is
// already known to be reducible. We can use an inherited attribute for
// that.
return;
}
}
for (Loop *InnerL : L)
collectSupportedLoops(*InnerL, LI, ORE, V);
}
namespace {
/// The LoopVectorize Pass.
struct LoopVectorize : public FunctionPass {
/// Pass identification, replacement for typeid
static char ID;
LoopVectorizePass Impl;
explicit LoopVectorize(bool InterleaveOnlyWhenForced = false,
bool VectorizeOnlyWhenForced = false)
: FunctionPass(ID) {
Impl.InterleaveOnlyWhenForced = InterleaveOnlyWhenForced;
Impl.VectorizeOnlyWhenForced = VectorizeOnlyWhenForced;
initializeLoopVectorizePass(*PassRegistry::getPassRegistry());
}
bool runOnFunction(Function &F) override {
if (skipFunction(F))
return false;
auto *SE = &getAnalysis<ScalarEvolutionWrapperPass>().getSE();
auto *LI = &getAnalysis<LoopInfoWrapperPass>().getLoopInfo();
auto *TTI = &getAnalysis<TargetTransformInfoWrapperPass>().getTTI(F);
auto *DT = &getAnalysis<DominatorTreeWrapperPass>().getDomTree();
auto *BFI = &getAnalysis<BlockFrequencyInfoWrapperPass>().getBFI();
auto *TLIP = getAnalysisIfAvailable<TargetLibraryInfoWrapperPass>();
auto *TLI = TLIP ? &TLIP->getTLI() : nullptr;
auto *AA = &getAnalysis<AAResultsWrapperPass>().getAAResults();
auto *AC = &getAnalysis<AssumptionCacheTracker>().getAssumptionCache(F);
auto *LAA = &getAnalysis<LoopAccessLegacyAnalysis>();
auto *DB = &getAnalysis<DemandedBitsWrapperPass>().getDemandedBits();
auto *ORE = &getAnalysis<OptimizationRemarkEmitterWrapperPass>().getORE();
std::function<const LoopAccessInfo &(Loop &)> GetLAA =
[&](Loop &L) -> const LoopAccessInfo & { return LAA->getInfo(&L); };
return Impl.runImpl(F, *SE, *LI, *TTI, *DT, *BFI, TLI, *DB, *AA, *AC,
GetLAA, *ORE);
}
void getAnalysisUsage(AnalysisUsage &AU) const override {
AU.addRequired<AssumptionCacheTracker>();
AU.addRequired<BlockFrequencyInfoWrapperPass>();
AU.addRequired<DominatorTreeWrapperPass>();
AU.addRequired<LoopInfoWrapperPass>();
AU.addRequired<ScalarEvolutionWrapperPass>();
AU.addRequired<TargetTransformInfoWrapperPass>();
AU.addRequired<AAResultsWrapperPass>();
AU.addRequired<LoopAccessLegacyAnalysis>();
AU.addRequired<DemandedBitsWrapperPass>();
AU.addRequired<OptimizationRemarkEmitterWrapperPass>();
// We currently do not preserve loopinfo/dominator analyses with outer loop
// vectorization. Until this is addressed, mark these analyses as preserved
// only for non-VPlan-native path.
// TODO: Preserve Loop and Dominator analyses for VPlan-native path.
if (!EnableVPlanNativePath) {
AU.addPreserved<LoopInfoWrapperPass>();
AU.addPreserved<DominatorTreeWrapperPass>();
}
AU.addPreserved<BasicAAWrapperPass>();
AU.addPreserved<GlobalsAAWrapperPass>();
}
};
} // end anonymous namespace
//===----------------------------------------------------------------------===//
// Implementation of LoopVectorizationLegality, InnerLoopVectorizer and
// LoopVectorizationCostModel and LoopVectorizationPlanner.
//===----------------------------------------------------------------------===//
Value *InnerLoopVectorizer::getBroadcastInstrs(Value *V) {
// We need to place the broadcast of invariant variables outside the loop,
// but only if it's proven safe to do so. Else, broadcast will be inside
// vector loop body.
Instruction *Instr = dyn_cast<Instruction>(V);
bool SafeToHoist = OrigLoop->isLoopInvariant(V) &&
(!Instr ||
DT->dominates(Instr->getParent(), LoopVectorPreHeader));
// Place the code for broadcasting invariant variables in the new preheader.
IRBuilder<>::InsertPointGuard Guard(Builder);
if (SafeToHoist)
Builder.SetInsertPoint(LoopVectorPreHeader->getTerminator());
// Broadcast the scalar into all locations in the vector.
Value *Shuf = Builder.CreateVectorSplat(VF, V, "broadcast");
return Shuf;
}
void InnerLoopVectorizer::createVectorIntOrFpInductionPHI(
const InductionDescriptor &II, Value *Step, Instruction *EntryVal) {
assert((isa<PHINode>(EntryVal) || isa<TruncInst>(EntryVal)) &&
"Expected either an induction phi-node or a truncate of it!");
Value *Start = II.getStartValue();
// Construct the initial value of the vector IV in the vector loop preheader
auto CurrIP = Builder.saveIP();
Builder.SetInsertPoint(LoopVectorPreHeader->getTerminator());
if (isa<TruncInst>(EntryVal)) {
assert(Start->getType()->isIntegerTy() &&
"Truncation requires an integer type");
auto *TruncType = cast<IntegerType>(EntryVal->getType());
Step = Builder.CreateTrunc(Step, TruncType);
Start = Builder.CreateCast(Instruction::Trunc, Start, TruncType);
}
Value *SplatStart = Builder.CreateVectorSplat(VF, Start);
Value *SteppedStart =
getStepVector(SplatStart, 0, Step, II.getInductionOpcode());
// We create vector phi nodes for both integer and floating-point induction
// variables. Here, we determine the kind of arithmetic we will perform.
Instruction::BinaryOps AddOp;
Instruction::BinaryOps MulOp;
if (Step->getType()->isIntegerTy()) {
AddOp = Instruction::Add;
MulOp = Instruction::Mul;
} else {
AddOp = II.getInductionOpcode();
MulOp = Instruction::FMul;
}
// Multiply the vectorization factor by the step using integer or
// floating-point arithmetic as appropriate.
Value *ConstVF = getSignedIntOrFpConstant(Step->getType(), VF);
Value *Mul = addFastMathFlag(Builder.CreateBinOp(MulOp, Step, ConstVF));
// Create a vector splat to use in the induction update.
//
// FIXME: If the step is non-constant, we create the vector splat with
// IRBuilder. IRBuilder can constant-fold the multiply, but it doesn't
// handle a constant vector splat.
Value *SplatVF = isa<Constant>(Mul)
? ConstantVector::getSplat(VF, cast<Constant>(Mul))
: Builder.CreateVectorSplat(VF, Mul);
Builder.restoreIP(CurrIP);
// We may need to add the step a number of times, depending on the unroll
// factor. The last of those goes into the PHI.
PHINode *VecInd = PHINode::Create(SteppedStart->getType(), 2, "vec.ind",
&*LoopVectorBody->getFirstInsertionPt());
VecInd->setDebugLoc(EntryVal->getDebugLoc());
Instruction *LastInduction = VecInd;
for (unsigned Part = 0; Part < UF; ++Part) {
VectorLoopValueMap.setVectorValue(EntryVal, Part, LastInduction);
if (isa<TruncInst>(EntryVal))
addMetadata(LastInduction, EntryVal);
recordVectorLoopValueForInductionCast(II, EntryVal, LastInduction, Part);
LastInduction = cast<Instruction>(addFastMathFlag(
Builder.CreateBinOp(AddOp, LastInduction, SplatVF, "step.add")));
LastInduction->setDebugLoc(EntryVal->getDebugLoc());
}
// Move the last step to the end of the latch block. This ensures consistent
// placement of all induction updates.
auto *LoopVectorLatch = LI->getLoopFor(LoopVectorBody)->getLoopLatch();
auto *Br = cast<BranchInst>(LoopVectorLatch->getTerminator());
auto *ICmp = cast<Instruction>(Br->getCondition());
LastInduction->moveBefore(ICmp);
LastInduction->setName("vec.ind.next");
VecInd->addIncoming(SteppedStart, LoopVectorPreHeader);
VecInd->addIncoming(LastInduction, LoopVectorLatch);
}
bool InnerLoopVectorizer::shouldScalarizeInstruction(Instruction *I) const {
return Cost->isScalarAfterVectorization(I, VF) ||
Cost->isProfitableToScalarize(I, VF);
}
bool InnerLoopVectorizer::needsScalarInduction(Instruction *IV) const {
if (shouldScalarizeInstruction(IV))
return true;
auto isScalarInst = [&](User *U) -> bool {
auto *I = cast<Instruction>(U);
return (OrigLoop->contains(I) && shouldScalarizeInstruction(I));
};
return llvm::any_of(IV->users(), isScalarInst);
}
void InnerLoopVectorizer::recordVectorLoopValueForInductionCast(
const InductionDescriptor &ID, const Instruction *EntryVal,
Value *VectorLoopVal, unsigned Part, unsigned Lane) {
assert((isa<PHINode>(EntryVal) || isa<TruncInst>(EntryVal)) &&
"Expected either an induction phi-node or a truncate of it!");
// This induction variable is not the phi from the original loop but the
// newly-created IV based on the proof that casted Phi is equal to the
// uncasted Phi in the vectorized loop (under a runtime guard possibly). It
// re-uses the same InductionDescriptor that original IV uses but we don't
// have to do any recording in this case - that is done when original IV is
// processed.
if (isa<TruncInst>(EntryVal))
return;
const SmallVectorImpl<Instruction *> &Casts = ID.getCastInsts();
if (Casts.empty())
return;
// Only the first Cast instruction in the Casts vector is of interest.
// The rest of the Casts (if exist) have no uses outside the
// induction update chain itself.
Instruction *CastInst = *Casts.begin();
if (Lane < UINT_MAX)
VectorLoopValueMap.setScalarValue(CastInst, {Part, Lane}, VectorLoopVal);
else
VectorLoopValueMap.setVectorValue(CastInst, Part, VectorLoopVal);
}
void InnerLoopVectorizer::widenIntOrFpInduction(PHINode *IV, TruncInst *Trunc) {
assert((IV->getType()->isIntegerTy() || IV != OldInduction) &&
"Primary induction variable must have an integer type");
auto II = Legal->getInductionVars()->find(IV);
assert(II != Legal->getInductionVars()->end() && "IV is not an induction");
auto ID = II->second;
assert(IV->getType() == ID.getStartValue()->getType() && "Types must match");
// The scalar value to broadcast. This will be derived from the canonical
// induction variable.
Value *ScalarIV = nullptr;
// The value from the original loop to which we are mapping the new induction
// variable.
Instruction *EntryVal = Trunc ? cast<Instruction>(Trunc) : IV;
// True if we have vectorized the induction variable.
auto VectorizedIV = false;
// Determine if we want a scalar version of the induction variable. This is
// true if the induction variable itself is not widened, or if it has at
// least one user in the loop that is not widened.
auto NeedsScalarIV = VF > 1 && needsScalarInduction(EntryVal);
// Generate code for the induction step. Note that induction steps are
// required to be loop-invariant
assert(PSE.getSE()->isLoopInvariant(ID.getStep(), OrigLoop) &&
"Induction step should be loop invariant");
auto &DL = OrigLoop->getHeader()->getModule()->getDataLayout();
Value *Step = nullptr;
if (PSE.getSE()->isSCEVable(IV->getType())) {
SCEVExpander Exp(*PSE.getSE(), DL, "induction");
Step = Exp.expandCodeFor(ID.getStep(), ID.getStep()->getType(),
LoopVectorPreHeader->getTerminator());
} else {
Step = cast<SCEVUnknown>(ID.getStep())->getValue();
}
// Try to create a new independent vector induction variable. If we can't
// create the phi node, we will splat the scalar induction variable in each
// loop iteration.
if (VF > 1 && !shouldScalarizeInstruction(EntryVal)) {
createVectorIntOrFpInductionPHI(ID, Step, EntryVal);
VectorizedIV = true;
}
// If we haven't yet vectorized the induction variable, or if we will create
// a scalar one, we need to define the scalar induction variable and step
// values. If we were given a truncation type, truncate the canonical
// induction variable and step. Otherwise, derive these values from the
// induction descriptor.
if (!VectorizedIV || NeedsScalarIV) {
ScalarIV = Induction;
if (IV != OldInduction) {
ScalarIV = IV->getType()->isIntegerTy()
? Builder.CreateSExtOrTrunc(Induction, IV->getType())
: Builder.CreateCast(Instruction::SIToFP, Induction,
IV->getType());
ScalarIV = emitTransformedIndex(Builder, ScalarIV, PSE.getSE(), DL, ID);
ScalarIV->setName("offset.idx");
}
if (Trunc) {
auto *TruncType = cast<IntegerType>(Trunc->getType());
assert(Step->getType()->isIntegerTy() &&
"Truncation requires an integer step");
ScalarIV = Builder.CreateTrunc(ScalarIV, TruncType);
Step = Builder.CreateTrunc(Step, TruncType);
}
}
// If we haven't yet vectorized the induction variable, splat the scalar
// induction variable, and build the necessary step vectors.
// TODO: Don't do it unless the vectorized IV is really required.
if (!VectorizedIV) {
Value *Broadcasted = getBroadcastInstrs(ScalarIV);
for (unsigned Part = 0; Part < UF; ++Part) {
Value *EntryPart =
getStepVector(Broadcasted, VF * Part, Step, ID.getInductionOpcode());
VectorLoopValueMap.setVectorValue(EntryVal, Part, EntryPart);
if (Trunc)
addMetadata(EntryPart, Trunc);
recordVectorLoopValueForInductionCast(ID, EntryVal, EntryPart, Part);
}
}
// If an induction variable is only used for counting loop iterations or
// calculating addresses, it doesn't need to be widened. Create scalar steps
// that can be used by instructions we will later scalarize. Note that the
// addition of the scalar steps will not increase the number of instructions
// in the loop in the common case prior to InstCombine. We will be trading
// one vector extract for each scalar step.
if (NeedsScalarIV)
buildScalarSteps(ScalarIV, Step, EntryVal, ID);
}
Value *InnerLoopVectorizer::getStepVector(Value *Val, int StartIdx, Value *Step,
Instruction::BinaryOps BinOp) {
// Create and check the types.
assert(Val->getType()->isVectorTy() && "Must be a vector");
int VLen = Val->getType()->getVectorNumElements();
Type *STy = Val->getType()->getScalarType();
assert((STy->isIntegerTy() || STy->isFloatingPointTy()) &&
"Induction Step must be an integer or FP");
assert(Step->getType() == STy && "Step has wrong type");
SmallVector<Constant *, 8> Indices;
if (STy->isIntegerTy()) {
// Create a vector of consecutive numbers from zero to VF.
for (int i = 0; i < VLen; ++i)
Indices.push_back(ConstantInt::get(STy, StartIdx + i));
// Add the consecutive indices to the vector value.
Constant *Cv = ConstantVector::get(Indices);
assert(Cv->getType() == Val->getType() && "Invalid consecutive vec");
Step = Builder.CreateVectorSplat(VLen, Step);
assert(Step->getType() == Val->getType() && "Invalid step vec");
// FIXME: The newly created binary instructions should contain nsw/nuw flags,
// which can be found from the original scalar operations.
Step = Builder.CreateMul(Cv, Step);
return Builder.CreateAdd(Val, Step, "induction");
}
// Floating point induction.
assert((BinOp == Instruction::FAdd || BinOp == Instruction::FSub) &&
"Binary Opcode should be specified for FP induction");
// Create a vector of consecutive numbers from zero to VF.
for (int i = 0; i < VLen; ++i)
Indices.push_back(ConstantFP::get(STy, (double)(StartIdx + i)));
// Add the consecutive indices to the vector value.
Constant *Cv = ConstantVector::get(Indices);
Step = Builder.CreateVectorSplat(VLen, Step);
// Floating point operations had to be 'fast' to enable the induction.
FastMathFlags Flags;
Flags.setFast();
Value *MulOp = Builder.CreateFMul(Cv, Step);
if (isa<Instruction>(MulOp))
// Have to check, MulOp may be a constant
cast<Instruction>(MulOp)->setFastMathFlags(Flags);
Value *BOp = Builder.CreateBinOp(BinOp, Val, MulOp, "induction");
if (isa<Instruction>(BOp))
cast<Instruction>(BOp)->setFastMathFlags(Flags);
return BOp;
}
void InnerLoopVectorizer::buildScalarSteps(Value *ScalarIV, Value *Step,
Instruction *EntryVal,
const InductionDescriptor &ID) {
// We shouldn't have to build scalar steps if we aren't vectorizing.
assert(VF > 1 && "VF should be greater than one");
// Get the value type and ensure it and the step have the same integer type.
Type *ScalarIVTy = ScalarIV->getType()->getScalarType();
assert(ScalarIVTy == Step->getType() &&
"Val and Step should have the same type");
// We build scalar steps for both integer and floating-point induction
// variables. Here, we determine the kind of arithmetic we will perform.
Instruction::BinaryOps AddOp;
Instruction::BinaryOps MulOp;
if (ScalarIVTy->isIntegerTy()) {
AddOp = Instruction::Add;
MulOp = Instruction::Mul;
} else {
AddOp = ID.getInductionOpcode();
MulOp = Instruction::FMul;
}
// Determine the number of scalars we need to generate for each unroll
// iteration. If EntryVal is uniform, we only need to generate the first
// lane. Otherwise, we generate all VF values.
unsigned Lanes =
Cost->isUniformAfterVectorization(cast<Instruction>(EntryVal), VF) ? 1
: VF;
// Compute the scalar steps and save the results in VectorLoopValueMap.
for (unsigned Part = 0; Part < UF; ++Part) {
for (unsigned Lane = 0; Lane < Lanes; ++Lane) {
auto *StartIdx = getSignedIntOrFpConstant(ScalarIVTy, VF * Part + Lane);
auto *Mul = addFastMathFlag(Builder.CreateBinOp(MulOp, StartIdx, Step));
auto *Add = addFastMathFlag(Builder.CreateBinOp(AddOp, ScalarIV, Mul));
VectorLoopValueMap.setScalarValue(EntryVal, {Part, Lane}, Add);
recordVectorLoopValueForInductionCast(ID, EntryVal, Add, Part, Lane);
}
}
}
Value *InnerLoopVectorizer::getOrCreateVectorValue(Value *V, unsigned Part) {
assert(V != Induction && "The new induction variable should not be used.");
assert(!V->getType()->isVectorTy() && "Can't widen a vector");
assert(!V->getType()->isVoidTy() && "Type does not produce a value");
// If we have a stride that is replaced by one, do it here. Defer this for
// the VPlan-native path until we start running Legal checks in that path.
if (!EnableVPlanNativePath && Legal->hasStride(V))
V = ConstantInt::get(V->getType(), 1);
// If we have a vector mapped to this value, return it.
if (VectorLoopValueMap.hasVectorValue(V, Part))
return VectorLoopValueMap.getVectorValue(V, Part);
// If the value has not been vectorized, check if it has been scalarized
// instead. If it has been scalarized, and we actually need the value in
// vector form, we will construct the vector values on demand.
if (VectorLoopValueMap.hasAnyScalarValue(V)) {
Value *ScalarValue = VectorLoopValueMap.getScalarValue(V, {Part, 0});
// If we've scalarized a value, that value should be an instruction.
auto *I = cast<Instruction>(V);
// If we aren't vectorizing, we can just copy the scalar map values over to
// the vector map.
if (VF == 1) {
VectorLoopValueMap.setVectorValue(V, Part, ScalarValue);
return ScalarValue;
}
// Get the last scalar instruction we generated for V and Part. If the value
// is known to be uniform after vectorization, this corresponds to lane zero
// of the Part unroll iteration. Otherwise, the last instruction is the one
// we created for the last vector lane of the Part unroll iteration.
unsigned LastLane = Cost->isUniformAfterVectorization(I, VF) ? 0 : VF - 1;
auto *LastInst = cast<Instruction>(
VectorLoopValueMap.getScalarValue(V, {Part, LastLane}));
// Set the insert point after the last scalarized instruction. This ensures
// the insertelement sequence will directly follow the scalar definitions.
auto OldIP = Builder.saveIP();
auto NewIP = std::next(BasicBlock::iterator(LastInst));
Builder.SetInsertPoint(&*NewIP);
// However, if we are vectorizing, we need to construct the vector values.
// If the value is known to be uniform after vectorization, we can just
// broadcast the scalar value corresponding to lane zero for each unroll
// iteration. Otherwise, we construct the vector values using insertelement
// instructions. Since the resulting vectors are stored in
// VectorLoopValueMap, we will only generate the insertelements once.
Value *VectorValue = nullptr;
if (Cost->isUniformAfterVectorization(I, VF)) {
VectorValue = getBroadcastInstrs(ScalarValue);
VectorLoopValueMap.setVectorValue(V, Part, VectorValue);
} else {
// Initialize packing with insertelements to start from undef.
Value *Undef = UndefValue::get(VectorType::get(V->getType(), VF));
VectorLoopValueMap.setVectorValue(V, Part, Undef);
for (unsigned Lane = 0; Lane < VF; ++Lane)
packScalarIntoVectorValue(V, {Part, Lane});
VectorValue = VectorLoopValueMap.getVectorValue(V, Part);
}
Builder.restoreIP(OldIP);
return VectorValue;
}
// If this scalar is unknown, assume that it is a constant or that it is
// loop invariant. Broadcast V and save the value for future uses.
Value *B = getBroadcastInstrs(V);
VectorLoopValueMap.setVectorValue(V, Part, B);
return B;
}
Value *
InnerLoopVectorizer::getOrCreateScalarValue(Value *V,
const VPIteration &Instance) {
// If the value is not an instruction contained in the loop, it should
// already be scalar.
if (OrigLoop->isLoopInvariant(V))
return V;
assert(Instance.Lane > 0
? !Cost->isUniformAfterVectorization(cast<Instruction>(V), VF)
: true && "Uniform values only have lane zero");
// If the value from the original loop has not been vectorized, it is
// represented by UF x VF scalar values in the new loop. Return the requested
// scalar value.
if (VectorLoopValueMap.hasScalarValue(V, Instance))
return VectorLoopValueMap.getScalarValue(V, Instance);
// If the value has not been scalarized, get its entry in VectorLoopValueMap
// for the given unroll part. If this entry is not a vector type (i.e., the
// vectorization factor is one), there is no need to generate an
// extractelement instruction.
auto *U = getOrCreateVectorValue(V, Instance.Part);
if (!U->getType()->isVectorTy()) {
assert(VF == 1 && "Value not scalarized has non-vector type");
return U;
}
// Otherwise, the value from the original loop has been vectorized and is
// represented by UF vector values. Extract and return the requested scalar
// value from the appropriate vector lane.
return Builder.CreateExtractElement(U, Builder.getInt32(Instance.Lane));
}
void InnerLoopVectorizer::packScalarIntoVectorValue(
Value *V, const VPIteration &Instance) {
assert(V != Induction && "The new induction variable should not be used.");
assert(!V->getType()->isVectorTy() && "Can't pack a vector");
assert(!V->getType()->isVoidTy() && "Type does not produce a value");
Value *ScalarInst = VectorLoopValueMap.getScalarValue(V, Instance);
Value *VectorValue = VectorLoopValueMap.getVectorValue(V, Instance.Part);
VectorValue = Builder.CreateInsertElement(VectorValue, ScalarInst,
Builder.getInt32(Instance.Lane));
VectorLoopValueMap.resetVectorValue(V, Instance.Part, VectorValue);
}
Value *InnerLoopVectorizer::reverseVector(Value *Vec) {
assert(Vec->getType()->isVectorTy() && "Invalid type");
SmallVector<Constant *, 8> ShuffleMask;
for (unsigned i = 0; i < VF; ++i)
ShuffleMask.push_back(Builder.getInt32(VF - i - 1));
return Builder.CreateShuffleVector(Vec, UndefValue::get(Vec->getType()),
ConstantVector::get(ShuffleMask),
"reverse");
}
// Return whether we allow using masked interleave-groups (for dealing with
// strided loads/stores that reside in predicated blocks, or for dealing
// with gaps).
static bool useMaskedInterleavedAccesses(const TargetTransformInfo &TTI) {
// If an override option has been passed in for interleaved accesses, use it.
if (EnableMaskedInterleavedMemAccesses.getNumOccurrences() > 0)
return EnableMaskedInterleavedMemAccesses;
return TTI.enableMaskedInterleavedAccessVectorization();
}
// Try to vectorize the interleave group that \p Instr belongs to.
//
// E.g. Translate following interleaved load group (factor = 3):
// for (i = 0; i < N; i+=3) {
// R = Pic[i]; // Member of index 0
// G = Pic[i+1]; // Member of index 1
// B = Pic[i+2]; // Member of index 2
// ... // do something to R, G, B
// }
// To:
// %wide.vec = load <12 x i32> ; Read 4 tuples of R,G,B
// %R.vec = shuffle %wide.vec, undef, <0, 3, 6, 9> ; R elements
// %G.vec = shuffle %wide.vec, undef, <1, 4, 7, 10> ; G elements
// %B.vec = shuffle %wide.vec, undef, <2, 5, 8, 11> ; B elements
//
// Or translate following interleaved store group (factor = 3):
// for (i = 0; i < N; i+=3) {
// ... do something to R, G, B
// Pic[i] = R; // Member of index 0
// Pic[i+1] = G; // Member of index 1
// Pic[i+2] = B; // Member of index 2
// }
// To:
// %R_G.vec = shuffle %R.vec, %G.vec, <0, 1, 2, ..., 7>
// %B_U.vec = shuffle %B.vec, undef, <0, 1, 2, 3, u, u, u, u>
// %interleaved.vec = shuffle %R_G.vec, %B_U.vec,
// <0, 4, 8, 1, 5, 9, 2, 6, 10, 3, 7, 11> ; Interleave R,G,B elements
// store <12 x i32> %interleaved.vec ; Write 4 tuples of R,G,B
void InnerLoopVectorizer::vectorizeInterleaveGroup(Instruction *Instr,
VectorParts *BlockInMask) {
const InterleaveGroup<Instruction> *Group =
Cost->getInterleavedAccessGroup(Instr);
assert(Group && "Fail to get an interleaved access group.");
// Skip if current instruction is not the insert position.
if (Instr != Group->getInsertPos())
return;
const DataLayout &DL = Instr->getModule()->getDataLayout();
Value *Ptr = getLoadStorePointerOperand(Instr);
// Prepare for the vector type of the interleaved load/store.
Type *ScalarTy = getMemInstValueType(Instr);
unsigned InterleaveFactor = Group->getFactor();
Type *VecTy = VectorType::get(ScalarTy, InterleaveFactor * VF);
Type *PtrTy = VecTy->getPointerTo(getLoadStoreAddressSpace(Instr));
// Prepare for the new pointers.
setDebugLocFromInst(Builder, Ptr);
SmallVector<Value *, 2> NewPtrs;
unsigned Index = Group->getIndex(Instr);
VectorParts Mask;
bool IsMaskForCondRequired = BlockInMask;
if (IsMaskForCondRequired) {
Mask = *BlockInMask;
// TODO: extend the masked interleaved-group support to reversed access.
assert(!Group->isReverse() && "Reversed masked interleave-group "
"not supported.");
}
// If the group is reverse, adjust the index to refer to the last vector lane
// instead of the first. We adjust the index from the first vector lane,
// rather than directly getting the pointer for lane VF - 1, because the
// pointer operand of the interleaved access is supposed to be uniform. For
// uniform instructions, we're only required to generate a value for the
// first vector lane in each unroll iteration.
if (Group->isReverse())
Index += (VF - 1) * Group->getFactor();
bool InBounds = false;
if (auto *gep = dyn_cast<GetElementPtrInst>(Ptr->stripPointerCasts()))
InBounds = gep->isInBounds();
for (unsigned Part = 0; Part < UF; Part++) {
Value *NewPtr = getOrCreateScalarValue(Ptr, {Part, 0});
// Notice current instruction could be any index. Need to adjust the address
// to the member of index 0.
//
// E.g. a = A[i+1]; // Member of index 1 (Current instruction)
// b = A[i]; // Member of index 0
// Current pointer is pointed to A[i+1], adjust it to A[i].
//
// E.g. A[i+1] = a; // Member of index 1
// A[i] = b; // Member of index 0
// A[i+2] = c; // Member of index 2 (Current instruction)
// Current pointer is pointed to A[i+2], adjust it to A[i].
NewPtr = Builder.CreateGEP(ScalarTy, NewPtr, Builder.getInt32(-Index));
if (InBounds)
cast<GetElementPtrInst>(NewPtr)->setIsInBounds(true);
// Cast to the vector pointer type.
NewPtrs.push_back(Builder.CreateBitCast(NewPtr, PtrTy));
}
setDebugLocFromInst(Builder, Instr);
Value *UndefVec = UndefValue::get(VecTy);
Value *MaskForGaps = nullptr;
if (Group->requiresScalarEpilogue() && !Cost->isScalarEpilogueAllowed()) {
MaskForGaps = createBitMaskForGaps(Builder, VF, *Group);
assert(MaskForGaps && "Mask for Gaps is required but it is null");
}
// Vectorize the interleaved load group.
if (isa<LoadInst>(Instr)) {
// For each unroll part, create a wide load for the group.
SmallVector<Value *, 2> NewLoads;
for (unsigned Part = 0; Part < UF; Part++) {
Instruction *NewLoad;
if (IsMaskForCondRequired || MaskForGaps) {
assert(useMaskedInterleavedAccesses(*TTI) &&
"masked interleaved groups are not allowed.");
Value *GroupMask = MaskForGaps;
if (IsMaskForCondRequired) {
auto *Undefs = UndefValue::get(Mask[Part]->getType());
auto *RepMask = createReplicatedMask(Builder, InterleaveFactor, VF);
Value *ShuffledMask = Builder.CreateShuffleVector(
Mask[Part], Undefs, RepMask, "interleaved.mask");
GroupMask = MaskForGaps
? Builder.CreateBinOp(Instruction::And, ShuffledMask,
MaskForGaps)
: ShuffledMask;
}
NewLoad =
Builder.CreateMaskedLoad(NewPtrs[Part], Group->getAlignment(),
GroupMask, UndefVec, "wide.masked.vec");
}
else
NewLoad = Builder.CreateAlignedLoad(VecTy, NewPtrs[Part],
Group->getAlignment(), "wide.vec");
Group->addMetadata(NewLoad);
NewLoads.push_back(NewLoad);
}
// For each member in the group, shuffle out the appropriate data from the
// wide loads.
for (unsigned I = 0; I < InterleaveFactor; ++I) {
Instruction *Member = Group->getMember(I);
// Skip the gaps in the group.
if (!Member)
continue;
Constant *StrideMask = createStrideMask(Builder, I, InterleaveFactor, VF);
for (unsigned Part = 0; Part < UF; Part++) {
Value *StridedVec = Builder.CreateShuffleVector(
NewLoads[Part], UndefVec, StrideMask, "strided.vec");
// If this member has different type, cast the result type.
if (Member->getType() != ScalarTy) {
VectorType *OtherVTy = VectorType::get(Member->getType(), VF);
StridedVec = createBitOrPointerCast(StridedVec, OtherVTy, DL);
}
if (Group->isReverse())
StridedVec = reverseVector(StridedVec);
VectorLoopValueMap.setVectorValue(Member, Part, StridedVec);
}
}
return;
}
// The sub vector type for current instruction.
VectorType *SubVT = VectorType::get(ScalarTy, VF);
// Vectorize the interleaved store group.
for (unsigned Part = 0; Part < UF; Part++) {
// Collect the stored vector from each member.
SmallVector<Value *, 4> StoredVecs;
for (unsigned i = 0; i < InterleaveFactor; i++) {
// Interleaved store group doesn't allow a gap, so each index has a member
Instruction *Member = Group->getMember(i);
assert(Member && "Fail to get a member from an interleaved store group");
Value *StoredVec = getOrCreateVectorValue(
cast<StoreInst>(Member)->getValueOperand(), Part);
if (Group->isReverse())
StoredVec = reverseVector(StoredVec);
// If this member has different type, cast it to a unified type.
if (StoredVec->getType() != SubVT)
StoredVec = createBitOrPointerCast(StoredVec, SubVT, DL);
StoredVecs.push_back(StoredVec);
}
// Concatenate all vectors into a wide vector.
Value *WideVec = concatenateVectors(Builder, StoredVecs);
// Interleave the elements in the wide vector.
Constant *IMask = createInterleaveMask(Builder, VF, InterleaveFactor);
Value *IVec = Builder.CreateShuffleVector(WideVec, UndefVec, IMask,
"interleaved.vec");
Instruction *NewStoreInstr;
if (IsMaskForCondRequired) {
auto *Undefs = UndefValue::get(Mask[Part]->getType());
auto *RepMask = createReplicatedMask(Builder, InterleaveFactor, VF);
Value *ShuffledMask = Builder.CreateShuffleVector(
Mask[Part], Undefs, RepMask, "interleaved.mask");
NewStoreInstr = Builder.CreateMaskedStore(
IVec, NewPtrs[Part], Group->getAlignment(), ShuffledMask);
}
else
NewStoreInstr = Builder.CreateAlignedStore(IVec, NewPtrs[Part],
Group->getAlignment());
Group->addMetadata(NewStoreInstr);
}
}
void InnerLoopVectorizer::vectorizeMemoryInstruction(Instruction *Instr,
VectorParts *BlockInMask) {
// Attempt to issue a wide load.
LoadInst *LI = dyn_cast<LoadInst>(Instr);
StoreInst *SI = dyn_cast<StoreInst>(Instr);
assert((LI || SI) && "Invalid Load/Store instruction");
LoopVectorizationCostModel::InstWidening Decision =
Cost->getWideningDecision(Instr, VF);
assert(Decision != LoopVectorizationCostModel::CM_Unknown &&
"CM decision should be taken at this point");
if (Decision == LoopVectorizationCostModel::CM_Interleave)
return vectorizeInterleaveGroup(Instr);
Type *ScalarDataTy = getMemInstValueType(Instr);
Type *DataTy = VectorType::get(ScalarDataTy, VF);
Value *Ptr = getLoadStorePointerOperand(Instr);
unsigned Alignment = getLoadStoreAlignment(Instr);
// An alignment of 0 means target abi alignment. We need to use the scalar's
// target abi alignment in such a case.
const DataLayout &DL = Instr->getModule()->getDataLayout();
if (!Alignment)
Alignment = DL.getABITypeAlignment(ScalarDataTy);
unsigned AddressSpace = getLoadStoreAddressSpace(Instr);
// Determine if the pointer operand of the access is either consecutive or
// reverse consecutive.
bool Reverse = (Decision == LoopVectorizationCostModel::CM_Widen_Reverse);
bool ConsecutiveStride =
Reverse || (Decision == LoopVectorizationCostModel::CM_Widen);
bool CreateGatherScatter =
(Decision == LoopVectorizationCostModel::CM_GatherScatter);
// Either Ptr feeds a vector load/store, or a vector GEP should feed a vector
// gather/scatter. Otherwise Decision should have been to Scalarize.
assert((ConsecutiveStride || CreateGatherScatter) &&
"The instruction should be scalarized");
// Handle consecutive loads/stores.
if (ConsecutiveStride)
Ptr = getOrCreateScalarValue(Ptr, {0, 0});
VectorParts Mask;
bool isMaskRequired = BlockInMask;
if (isMaskRequired)
Mask = *BlockInMask;
bool InBounds = false;
if (auto *gep = dyn_cast<GetElementPtrInst>(
getLoadStorePointerOperand(Instr)->stripPointerCasts()))
InBounds = gep->isInBounds();
const auto CreateVecPtr = [&](unsigned Part, Value *Ptr) -> Value * {
// Calculate the pointer for the specific unroll-part.
GetElementPtrInst *PartPtr = nullptr;
if (Reverse) {
// If the address is consecutive but reversed, then the
// wide store needs to start at the last vector element.
PartPtr = cast<GetElementPtrInst>(
Builder.CreateGEP(ScalarDataTy, Ptr, Builder.getInt32(-Part * VF)));
PartPtr->setIsInBounds(InBounds);
PartPtr = cast<GetElementPtrInst>(
Builder.CreateGEP(ScalarDataTy, PartPtr, Builder.getInt32(1 - VF)));
PartPtr->setIsInBounds(InBounds);
if (isMaskRequired) // Reverse of a null all-one mask is a null mask.
Mask[Part] = reverseVector(Mask[Part]);
} else {
PartPtr = cast<GetElementPtrInst>(
Builder.CreateGEP(ScalarDataTy, Ptr, Builder.getInt32(Part * VF)));
PartPtr->setIsInBounds(InBounds);
}
return Builder.CreateBitCast(PartPtr, DataTy->getPointerTo(AddressSpace));
};
// Handle Stores:
if (SI) {
setDebugLocFromInst(Builder, SI);
for (unsigned Part = 0; Part < UF; ++Part) {
Instruction *NewSI = nullptr;
Value *StoredVal = getOrCreateVectorValue(SI->getValueOperand(), Part);
if (CreateGatherScatter) {
Value *MaskPart = isMaskRequired ? Mask[Part] : nullptr;
Value *VectorGep = getOrCreateVectorValue(Ptr, Part);
NewSI = Builder.CreateMaskedScatter(StoredVal, VectorGep, Alignment,
MaskPart);
} else {
if (Reverse) {
// If we store to reverse consecutive memory locations, then we need
// to reverse the order of elements in the stored value.
StoredVal = reverseVector(StoredVal);
// We don't want to update the value in the map as it might be used in
// another expression. So don't call resetVectorValue(StoredVal).
}
auto *VecPtr = CreateVecPtr(Part, Ptr);
if (isMaskRequired)
NewSI = Builder.CreateMaskedStore(StoredVal, VecPtr, Alignment,
Mask[Part]);
else
NewSI = Builder.CreateAlignedStore(StoredVal, VecPtr, Alignment);
}
addMetadata(NewSI, SI);
}
return;
}
// Handle loads.
assert(LI && "Must have a load instruction");
setDebugLocFromInst(Builder, LI);
for (unsigned Part = 0; Part < UF; ++Part) {
Value *NewLI;
if (CreateGatherScatter) {
Value *MaskPart = isMaskRequired ? Mask[Part] : nullptr;
Value *VectorGep = getOrCreateVectorValue(Ptr, Part);
NewLI = Builder.CreateMaskedGather(VectorGep, Alignment, MaskPart,
nullptr, "wide.masked.gather");
addMetadata(NewLI, LI);
} else {
auto *VecPtr = CreateVecPtr(Part, Ptr);
if (isMaskRequired)
NewLI = Builder.CreateMaskedLoad(VecPtr, Alignment, Mask[Part],
UndefValue::get(DataTy),
"wide.masked.load");
else
NewLI =
Builder.CreateAlignedLoad(DataTy, VecPtr, Alignment, "wide.load");
// Add metadata to the load, but setVectorValue to the reverse shuffle.
addMetadata(NewLI, LI);
if (Reverse)
NewLI = reverseVector(NewLI);
}
VectorLoopValueMap.setVectorValue(Instr, Part, NewLI);
}
}
void InnerLoopVectorizer::scalarizeInstruction(Instruction *Instr,
const VPIteration &Instance,
bool IfPredicateInstr) {
assert(!Instr->getType()->isAggregateType() && "Can't handle vectors");
setDebugLocFromInst(Builder, Instr);
// Does this instruction return a value ?
bool IsVoidRetTy = Instr->getType()->isVoidTy();
Instruction *Cloned = Instr->clone();
if (!IsVoidRetTy)
Cloned->setName(Instr->getName() + ".cloned");
// Replace the operands of the cloned instructions with their scalar
// equivalents in the new loop.
for (unsigned op = 0, e = Instr->getNumOperands(); op != e; ++op) {
auto *NewOp = getOrCreateScalarValue(Instr->getOperand(op), Instance);
Cloned->setOperand(op, NewOp);
}
addNewMetadata(Cloned, Instr);
// Place the cloned scalar in the new loop.
Builder.Insert(Cloned);
// Add the cloned scalar to the scalar map entry.
VectorLoopValueMap.setScalarValue(Instr, Instance, Cloned);
// If we just cloned a new assumption, add it the assumption cache.
if (auto *II = dyn_cast<IntrinsicInst>(Cloned))
if (II->getIntrinsicID() == Intrinsic::assume)
AC->registerAssumption(II);
// End if-block.
if (IfPredicateInstr)
PredicatedInstructions.push_back(Cloned);
}
PHINode *InnerLoopVectorizer::createInductionVariable(Loop *L, Value *Start,
Value *End, Value *Step,
Instruction *DL) {
BasicBlock *Header = L->getHeader();
BasicBlock *Latch = L->getLoopLatch();
// As we're just creating this loop, it's possible no latch exists
// yet. If so, use the header as this will be a single block loop.
if (!Latch)
Latch = Header;
IRBuilder<> Builder(&*Header->getFirstInsertionPt());
Instruction *OldInst = getDebugLocFromInstOrOperands(OldInduction);
setDebugLocFromInst(Builder, OldInst);
auto *Induction = Builder.CreatePHI(Start->getType(), 2, "index");
Builder.SetInsertPoint(Latch->getTerminator());
setDebugLocFromInst(Builder, OldInst);
// Create i+1 and fill the PHINode.
Value *Next = Builder.CreateAdd(Induction, Step, "index.next");
Induction->addIncoming(Start, L->getLoopPreheader());
Induction->addIncoming(Next, Latch);
// Create the compare.
Value *ICmp = Builder.CreateICmpEQ(Next, End);
Builder.CreateCondBr(ICmp, L->getExitBlock(), Header);
// Now we have two terminators. Remove the old one from the block.
Latch->getTerminator()->eraseFromParent();
return Induction;
}
Value *InnerLoopVectorizer::getOrCreateTripCount(Loop *L) {
if (TripCount)
return TripCount;
assert(L && "Create Trip Count for null loop.");
IRBuilder<> Builder(L->getLoopPreheader()->getTerminator());
// Find the loop boundaries.
ScalarEvolution *SE = PSE.getSE();
const SCEV *BackedgeTakenCount = PSE.getBackedgeTakenCount();
assert(BackedgeTakenCount != SE->getCouldNotCompute() &&
"Invalid loop count");
Type *IdxTy = Legal->getWidestInductionType();
assert(IdxTy && "No type for induction");
// The exit count might have the type of i64 while the phi is i32. This can
// happen if we have an induction variable that is sign extended before the
// compare. The only way that we get a backedge taken count is that the
// induction variable was signed and as such will not overflow. In such a case
// truncation is legal.
if (BackedgeTakenCount->getType()->getPrimitiveSizeInBits() >
IdxTy->getPrimitiveSizeInBits())
BackedgeTakenCount = SE->getTruncateOrNoop(BackedgeTakenCount, IdxTy);
BackedgeTakenCount = SE->getNoopOrZeroExtend(BackedgeTakenCount, IdxTy);
// Get the total trip count from the count by adding 1.
const SCEV *ExitCount = SE->getAddExpr(
BackedgeTakenCount, SE->getOne(BackedgeTakenCount->getType()));
const DataLayout &DL = L->getHeader()->getModule()->getDataLayout();
// Expand the trip count and place the new instructions in the preheader.
// Notice that the pre-header does not change, only the loop body.
SCEVExpander Exp(*SE, DL, "induction");
// Count holds the overall loop count (N).
TripCount = Exp.expandCodeFor(ExitCount, ExitCount->getType(),
L->getLoopPreheader()->getTerminator());
if (TripCount->getType()->isPointerTy())
TripCount =
CastInst::CreatePointerCast(TripCount, IdxTy, "exitcount.ptrcnt.to.int",
L->getLoopPreheader()->getTerminator());
return TripCount;
}
Value *InnerLoopVectorizer::getOrCreateVectorTripCount(Loop *L) {
if (VectorTripCount)
return VectorTripCount;
Value *TC = getOrCreateTripCount(L);
IRBuilder<> Builder(L->getLoopPreheader()->getTerminator());
Type *Ty = TC->getType();
Constant *Step = ConstantInt::get(Ty, VF * UF);
// If the tail is to be folded by masking, round the number of iterations N
// up to a multiple of Step instead of rounding down. This is done by first
// adding Step-1 and then rounding down. Note that it's ok if this addition
// overflows: the vector induction variable will eventually wrap to zero given
// that it starts at zero and its Step is a power of two; the loop will then
// exit, with the last early-exit vector comparison also producing all-true.
if (Cost->foldTailByMasking()) {
assert(isPowerOf2_32(VF * UF) &&
"VF*UF must be a power of 2 when folding tail by masking");
TC = Builder.CreateAdd(TC, ConstantInt::get(Ty, VF * UF - 1), "n.rnd.up");
}
// Now we need to generate the expression for the part of the loop that the
// vectorized body will execute. This is equal to N - (N % Step) if scalar
// iterations are not required for correctness, or N - Step, otherwise. Step
// is equal to the vectorization factor (number of SIMD elements) times the
// unroll factor (number of SIMD instructions).
Value *R = Builder.CreateURem(TC, Step, "n.mod.vf");
// If there is a non-reversed interleaved group that may speculatively access
// memory out-of-bounds, we need to ensure that there will be at least one
// iteration of the scalar epilogue loop. Thus, if the step evenly divides
// the trip count, we set the remainder to be equal to the step. If the step
// does not evenly divide the trip count, no adjustment is necessary since
// there will already be scalar iterations. Note that the minimum iterations
// check ensures that N >= Step.
if (VF > 1 && Cost->requiresScalarEpilogue()) {
auto *IsZero = Builder.CreateICmpEQ(R, ConstantInt::get(R->getType(), 0));
R = Builder.CreateSelect(IsZero, Step, R);
}
VectorTripCount = Builder.CreateSub(TC, R, "n.vec");
return VectorTripCount;
}
Value *InnerLoopVectorizer::createBitOrPointerCast(Value *V, VectorType *DstVTy,
const DataLayout &DL) {
// Verify that V is a vector type with same number of elements as DstVTy.
unsigned VF = DstVTy->getNumElements();
VectorType *SrcVecTy = cast<VectorType>(V->getType());
assert((VF == SrcVecTy->getNumElements()) && "Vector dimensions do not match");
Type *SrcElemTy = SrcVecTy->getElementType();
Type *DstElemTy = DstVTy->getElementType();
assert((DL.getTypeSizeInBits(SrcElemTy) == DL.getTypeSizeInBits(DstElemTy)) &&
"Vector elements must have same size");
// Do a direct cast if element types are castable.
if (CastInst::isBitOrNoopPointerCastable(SrcElemTy, DstElemTy, DL)) {
return Builder.CreateBitOrPointerCast(V, DstVTy);
}
// V cannot be directly casted to desired vector type.
// May happen when V is a floating point vector but DstVTy is a vector of
// pointers or vice-versa. Handle this using a two-step bitcast using an
// intermediate Integer type for the bitcast i.e. Ptr <-> Int <-> Float.
assert((DstElemTy->isPointerTy() != SrcElemTy->isPointerTy()) &&
"Only one type should be a pointer type");
assert((DstElemTy->isFloatingPointTy() != SrcElemTy->isFloatingPointTy()) &&
"Only one type should be a floating point type");
Type *IntTy =
IntegerType::getIntNTy(V->getContext(), DL.getTypeSizeInBits(SrcElemTy));
VectorType *VecIntTy = VectorType::get(IntTy, VF);
Value *CastVal = Builder.CreateBitOrPointerCast(V, VecIntTy);
return Builder.CreateBitOrPointerCast(CastVal, DstVTy);
}
void InnerLoopVectorizer::emitMinimumIterationCountCheck(Loop *L,
BasicBlock *Bypass) {
Value *Count = getOrCreateTripCount(L);
BasicBlock *BB = L->getLoopPreheader();
IRBuilder<> Builder(BB->getTerminator());
// Generate code to check if the loop's trip count is less than VF * UF, or
// equal to it in case a scalar epilogue is required; this implies that the
// vector trip count is zero. This check also covers the case where adding one
// to the backedge-taken count overflowed leading to an incorrect trip count
// of zero. In this case we will also jump to the scalar loop.
auto P = Cost->requiresScalarEpilogue() ? ICmpInst::ICMP_ULE
: ICmpInst::ICMP_ULT;
// If tail is to be folded, vector loop takes care of all iterations.
Value *CheckMinIters = Builder.getFalse();
if (!Cost->foldTailByMasking())
CheckMinIters = Builder.CreateICmp(
P, Count, ConstantInt::get(Count->getType(), VF * UF),
"min.iters.check");
BasicBlock *NewBB = BB->splitBasicBlock(BB->getTerminator(), "vector.ph");
// Update dominator tree immediately if the generated block is a
// LoopBypassBlock because SCEV expansions to generate loop bypass
// checks may query it before the current function is finished.
DT->addNewBlock(NewBB, BB);
if (L->getParentLoop())
L->getParentLoop()->addBasicBlockToLoop(NewBB, *LI);
ReplaceInstWithInst(BB->getTerminator(),
BranchInst::Create(Bypass, NewBB, CheckMinIters));
LoopBypassBlocks.push_back(BB);
}
void InnerLoopVectorizer::emitSCEVChecks(Loop