//===-- X86ISelLowering.cpp - X86 DAG Lowering Implementation -------------===//
//
//                     The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file defines the interfaces that X86 uses to lower LLVM code into a
// selection DAG.
//
//===----------------------------------------------------------------------===//

#include "X86ISelLowering.h"
#include "Utils/X86ShuffleDecode.h"
#include "X86CallingConv.h"
#include "X86FrameLowering.h"
#include "X86InstrBuilder.h"
#include "X86IntrinsicsInfo.h"
#include "X86MachineFunctionInfo.h"
#include "X86ShuffleDecodeConstantPool.h"
#include "X86TargetMachine.h"
#include "X86TargetObjectFile.h"
#include "llvm/ADT/SmallBitVector.h"
#include "llvm/ADT/SmallSet.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/ADT/StringExtras.h"
#include "llvm/ADT/StringSwitch.h"
#include "llvm/Analysis/EHPersonalities.h"
#include "llvm/CodeGen/IntrinsicLowering.h"
#include "llvm/CodeGen/MachineFrameInfo.h"
#include "llvm/CodeGen/MachineFunction.h"
#include "llvm/CodeGen/MachineInstrBuilder.h"
#include "llvm/CodeGen/MachineJumpTableInfo.h"
#include "llvm/CodeGen/MachineModuleInfo.h"
#include "llvm/CodeGen/MachineRegisterInfo.h"
#include "llvm/CodeGen/WinEHFuncInfo.h"
#include "llvm/IR/CallSite.h"
#include "llvm/IR/CallingConv.h"
#include "llvm/IR/Constants.h"
#include "llvm/IR/DerivedTypes.h"
#include "llvm/IR/DiagnosticInfo.h"
#include "llvm/IR/Function.h"
#include "llvm/IR/GlobalAlias.h"
#include "llvm/IR/GlobalVariable.h"
#include "llvm/IR/Instructions.h"
#include "llvm/IR/Intrinsics.h"
#include "llvm/MC/MCAsmInfo.h"
#include "llvm/MC/MCContext.h"
#include "llvm/MC/MCExpr.h"
#include "llvm/MC/MCSymbol.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/KnownBits.h"
#include "llvm/Support/MathExtras.h"
#include "llvm/Target/TargetLowering.h"
#include "llvm/Target/TargetOptions.h"
#include <algorithm>
#include <bitset>
#include <cctype>
#include <numeric>
using namespace llvm;

#define DEBUG_TYPE "x86-isel"

STATISTIC(NumTailCalls, "Number of tail calls");

static cl::opt<bool> ExperimentalVectorWideningLegalization(
    "x86-experimental-vector-widening-legalization", cl::init(false),
    cl::desc("Enable an experimental vector type legalization through widening "
             "rather than promotion."),
    cl::Hidden);

static cl::opt<int> ExperimentalPrefLoopAlignment(
    "x86-experimental-pref-loop-alignment", cl::init(4),
    cl::desc("Sets the preferable loop alignment for experiments "
             "(the last x86-experimental-pref-loop-alignment bits"
             " of the loop header PC will be 0)."),
    cl::Hidden);

static cl::opt<bool> MulConstantOptimization(
    "mul-constant-optimization", cl::init(true),
    cl::desc("Replace 'mul x, Const' with more effective instructions like "
             "SHIFT, LEA, etc."),
    cl::Hidden);

/// Call this when the user attempts to do something unsupported, like
/// returning a double without SSE2 enabled on x86_64. This is not fatal, unlike
/// report_fatal_error, so calling code should attempt to recover without
/// crashing.
static void errorUnsupported(SelectionDAG &DAG, const SDLoc &dl,
                             const char *Msg) {
  MachineFunction &MF = DAG.getMachineFunction();
  DAG.getContext()->diagnose(
      DiagnosticInfoUnsupported(*MF.getFunction(), Msg, dl.getDebugLoc()));
}

X86TargetLowering::X86TargetLowering(const X86TargetMachine &TM,
                                     const X86Subtarget &STI)
    : TargetLowering(TM), Subtarget(STI) {
  bool UseX87 = !Subtarget.useSoftFloat() && Subtarget.hasX87();
  X86ScalarSSEf64 = Subtarget.hasSSE2();
  X86ScalarSSEf32 = Subtarget.hasSSE1();
  MVT PtrVT = MVT::getIntegerVT(8 * TM.getPointerSize());

  // Set up the TargetLowering object.

  // X86 is weird. It always uses i8 for shift amounts and setcc results.
  setBooleanContents(ZeroOrOneBooleanContent);
  // X86-SSE is even stranger. It uses -1 or 0 for vector masks.
  setBooleanVectorContents(ZeroOrNegativeOneBooleanContent);

  // For 64-bit, since we have so many registers, use the ILP scheduler.
  // For 32-bit, use the register pressure specific scheduling.
  // For Atom, always use ILP scheduling.
  if (Subtarget.isAtom())
    setSchedulingPreference(Sched::ILP);
  else if (Subtarget.is64Bit())
    setSchedulingPreference(Sched::ILP);
  else
    setSchedulingPreference(Sched::RegPressure);
  const X86RegisterInfo *RegInfo = Subtarget.getRegisterInfo();
  setStackPointerRegisterToSaveRestore(RegInfo->getStackRegister());

  // Bypass expensive divides and use cheaper ones.
  if (TM.getOptLevel() >= CodeGenOpt::Default) {
    if (Subtarget.hasSlowDivide32())
      addBypassSlowDiv(32, 8);
    if (Subtarget.hasSlowDivide64() && Subtarget.is64Bit())
      addBypassSlowDiv(64, 32);
  }

  if (Subtarget.isTargetKnownWindowsMSVC() ||
      Subtarget.isTargetWindowsItanium()) {
    // Setup Windows compiler runtime calls.
    setLibcallName(RTLIB::SDIV_I64, "_alldiv");
    setLibcallName(RTLIB::UDIV_I64, "_aulldiv");
    setLibcallName(RTLIB::SREM_I64, "_allrem");
    setLibcallName(RTLIB::UREM_I64, "_aullrem");
    setLibcallName(RTLIB::MUL_I64, "_allmul");
    setLibcallCallingConv(RTLIB::SDIV_I64, CallingConv::X86_StdCall);
    setLibcallCallingConv(RTLIB::UDIV_I64, CallingConv::X86_StdCall);
    setLibcallCallingConv(RTLIB::SREM_I64, CallingConv::X86_StdCall);
    setLibcallCallingConv(RTLIB::UREM_I64, CallingConv::X86_StdCall);
    setLibcallCallingConv(RTLIB::MUL_I64, CallingConv::X86_StdCall);
  }

  if (Subtarget.isTargetDarwin()) {
    // Darwin should use _setjmp/_longjmp instead of setjmp/longjmp.
    setUseUnderscoreSetJmp(false);
    setUseUnderscoreLongJmp(false);
  } else if (Subtarget.isTargetWindowsGNU()) {
    // MS runtime is weird: it exports _setjmp, but longjmp!
    setUseUnderscoreSetJmp(true);
    setUseUnderscoreLongJmp(false);
  } else {
    setUseUnderscoreSetJmp(true);
    setUseUnderscoreLongJmp(true);
  }

  // Set up the register classes.
  addRegisterClass(MVT::i8, &X86::GR8RegClass);
  addRegisterClass(MVT::i16, &X86::GR16RegClass);
  addRegisterClass(MVT::i32, &X86::GR32RegClass);
  if (Subtarget.is64Bit())
    addRegisterClass(MVT::i64, &X86::GR64RegClass);

  for (MVT VT : MVT::integer_valuetypes())
    setLoadExtAction(ISD::SEXTLOAD, VT, MVT::i1, Promote);

  // We don't accept any truncstore of integer registers.
  setTruncStoreAction(MVT::i64, MVT::i32, Expand);
  setTruncStoreAction(MVT::i64, MVT::i16, Expand);
  setTruncStoreAction(MVT::i64, MVT::i8 , Expand);
  setTruncStoreAction(MVT::i32, MVT::i16, Expand);
  setTruncStoreAction(MVT::i32, MVT::i8 , Expand);
  setTruncStoreAction(MVT::i16, MVT::i8,  Expand);

  setTruncStoreAction(MVT::f64, MVT::f32, Expand);

  // SETOEQ and SETUNE require checking two conditions.
  setCondCodeAction(ISD::SETOEQ, MVT::f32, Expand);
  setCondCodeAction(ISD::SETOEQ, MVT::f64, Expand);
  setCondCodeAction(ISD::SETOEQ, MVT::f80, Expand);
  setCondCodeAction(ISD::SETUNE, MVT::f32, Expand);
  setCondCodeAction(ISD::SETUNE, MVT::f64, Expand);
  setCondCodeAction(ISD::SETUNE, MVT::f80, Expand);

  // Integer absolute.
  if (Subtarget.hasCMov()) {
    setOperationAction(ISD::ABS            , MVT::i16  , Custom);
    setOperationAction(ISD::ABS            , MVT::i32  , Custom);
    if (Subtarget.is64Bit())
      setOperationAction(ISD::ABS          , MVT::i64  , Custom);
  }

  // Promote all UINT_TO_FP to larger SINT_TO_FP's, as X86 doesn't have this
  // operation.
  setOperationAction(ISD::UINT_TO_FP       , MVT::i1   , Promote);
  setOperationAction(ISD::UINT_TO_FP       , MVT::i8   , Promote);
  setOperationAction(ISD::UINT_TO_FP       , MVT::i16  , Promote);

  if (Subtarget.is64Bit()) {
    if (!Subtarget.useSoftFloat() && Subtarget.hasAVX512())
      // f32/f64 are legal, f80 is custom.
      setOperationAction(ISD::UINT_TO_FP   , MVT::i32  , Custom);
    else
      setOperationAction(ISD::UINT_TO_FP   , MVT::i32  , Promote);
    setOperationAction(ISD::UINT_TO_FP     , MVT::i64  , Custom);
  } else if (!Subtarget.useSoftFloat()) {
    // We have an algorithm for SSE2->double, and we turn this into a
    // 64-bit FILD followed by conditional FADD for other targets.
    setOperationAction(ISD::UINT_TO_FP     , MVT::i64  , Custom);
    // We have an algorithm for SSE2, and we turn this into a 64-bit
    // FILD or VCVTUSI2SS/SD for other targets.
    setOperationAction(ISD::UINT_TO_FP     , MVT::i32  , Custom);
  }

  // Promote i1/i8 SINT_TO_FP to larger SINT_TO_FP's, as X86 doesn't have
  // this operation.
  setOperationAction(ISD::SINT_TO_FP       , MVT::i1   , Promote);
  setOperationAction(ISD::SINT_TO_FP       , MVT::i8   , Promote);

  if (!Subtarget.useSoftFloat()) {
    // SSE has no i16 to fp conversion, only i32.
    if (X86ScalarSSEf32) {
      setOperationAction(ISD::SINT_TO_FP     , MVT::i16  , Promote);
      // f32 and f64 cases are Legal, f80 case is not
      setOperationAction(ISD::SINT_TO_FP     , MVT::i32  , Custom);
    } else {
      setOperationAction(ISD::SINT_TO_FP     , MVT::i16  , Custom);
      setOperationAction(ISD::SINT_TO_FP     , MVT::i32  , Custom);
    }
  } else {
    setOperationAction(ISD::SINT_TO_FP     , MVT::i16  , Promote);
    setOperationAction(ISD::SINT_TO_FP     , MVT::i32  , Promote);
  }

  // Promote i1/i8 FP_TO_SINT to larger FP_TO_SINTS's, as X86 doesn't have
  // this operation.
  setOperationAction(ISD::FP_TO_SINT       , MVT::i1   , Promote);
  setOperationAction(ISD::FP_TO_SINT       , MVT::i8   , Promote);

  if (!Subtarget.useSoftFloat()) {
    // In 32-bit mode these are custom lowered.  In 64-bit mode F32 and F64
    // are Legal, f80 is custom lowered.
    setOperationAction(ISD::FP_TO_SINT     , MVT::i64  , Custom);
    setOperationAction(ISD::SINT_TO_FP     , MVT::i64  , Custom);

    if (X86ScalarSSEf32) {
      setOperationAction(ISD::FP_TO_SINT     , MVT::i16  , Promote);
      // f32 and f64 cases are Legal, f80 case is not
      setOperationAction(ISD::FP_TO_SINT     , MVT::i32  , Custom);
    } else {
      setOperationAction(ISD::FP_TO_SINT     , MVT::i16  , Custom);
      setOperationAction(ISD::FP_TO_SINT     , MVT::i32  , Custom);
    }
  } else {
    setOperationAction(ISD::FP_TO_SINT     , MVT::i16  , Promote);
    setOperationAction(ISD::FP_TO_SINT     , MVT::i32  , Expand);
    setOperationAction(ISD::FP_TO_SINT     , MVT::i64  , Expand);
  }

  // Handle FP_TO_UINT by promoting the destination to a larger signed
  // conversion.
  setOperationAction(ISD::FP_TO_UINT       , MVT::i1   , Promote);
  setOperationAction(ISD::FP_TO_UINT       , MVT::i8   , Promote);
  setOperationAction(ISD::FP_TO_UINT       , MVT::i16  , Promote);

  if (Subtarget.is64Bit()) {
    if (!Subtarget.useSoftFloat() && Subtarget.hasAVX512()) {
      // FP_TO_UINT-i32/i64 is legal for f32/f64, but custom for f80.
      setOperationAction(ISD::FP_TO_UINT   , MVT::i32  , Custom);
      setOperationAction(ISD::FP_TO_UINT   , MVT::i64  , Custom);
    } else {
      setOperationAction(ISD::FP_TO_UINT   , MVT::i32  , Promote);
      setOperationAction(ISD::FP_TO_UINT   , MVT::i64  , Expand);
    }
  } else if (!Subtarget.useSoftFloat()) {
    // Since AVX is a superset of SSE3, only check for SSE here.
    if (Subtarget.hasSSE1() && !Subtarget.hasSSE3())
      // Expand FP_TO_UINT into a select.
      // FIXME: We would like to use a Custom expander here eventually to do
      // the optimal thing for SSE vs. the default expansion in the legalizer.
      setOperationAction(ISD::FP_TO_UINT   , MVT::i32  , Expand);
    else
      // With AVX512 we can use vcvts[ds]2usi for f32/f64->i32, f80 is custom.
      // With SSE3 we can use fisttpll to convert to a signed i64; without
      // SSE, we're stuck with a fistpll.
      setOperationAction(ISD::FP_TO_UINT   , MVT::i32  , Custom);

    setOperationAction(ISD::FP_TO_UINT     , MVT::i64  , Custom);
  }

  // TODO: when we have SSE, these could be more efficient, by using movd/movq.
  if (!X86ScalarSSEf64) {
    setOperationAction(ISD::BITCAST        , MVT::f32  , Expand);
    setOperationAction(ISD::BITCAST        , MVT::i32  , Expand);
    if (Subtarget.is64Bit()) {
      setOperationAction(ISD::BITCAST      , MVT::f64  , Expand);
      // Without SSE, i64->f64 goes through memory.
      setOperationAction(ISD::BITCAST      , MVT::i64  , Expand);
    }
  } else if (!Subtarget.is64Bit())
    setOperationAction(ISD::BITCAST      , MVT::i64  , Custom);

  // Scalar integer divide and remainder are lowered to use operations that
  // produce two results, to match the available instructions. This exposes
  // the two-result form to trivial CSE, which is able to combine x/y and x%y
  // into a single instruction.
  //
  // Scalar integer multiply-high is also lowered to use two-result
  // operations, to match the available instructions. However, plain multiply
  // (low) operations are left as Legal, as there are single-result
  // instructions for this in x86. Using the two-result multiply instructions
  // when both high and low results are needed must be arranged by dagcombine.
  for (auto VT : { MVT::i8, MVT::i16, MVT::i32, MVT::i64 }) {
    setOperationAction(ISD::MULHS, VT, Expand);
    setOperationAction(ISD::MULHU, VT, Expand);
    setOperationAction(ISD::SDIV, VT, Expand);
    setOperationAction(ISD::UDIV, VT, Expand);
    setOperationAction(ISD::SREM, VT, Expand);
    setOperationAction(ISD::UREM, VT, Expand);
  }

  setOperationAction(ISD::BR_JT            , MVT::Other, Expand);
  setOperationAction(ISD::BRCOND           , MVT::Other, Custom);
  for (auto VT : { MVT::f32, MVT::f64, MVT::f80, MVT::f128,
                   MVT::i8,  MVT::i16, MVT::i32, MVT::i64 }) {
    setOperationAction(ISD::BR_CC,     VT, Expand);
    setOperationAction(ISD::SELECT_CC, VT, Expand);
  }
  if (Subtarget.is64Bit())
    setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i32, Legal);
  setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i16  , Legal);
  setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i8   , Legal);
  setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i1   , Expand);
  setOperationAction(ISD::FP_ROUND_INREG   , MVT::f32  , Expand);

  setOperationAction(ISD::FREM             , MVT::f32  , Expand);
  setOperationAction(ISD::FREM             , MVT::f64  , Expand);
  setOperationAction(ISD::FREM             , MVT::f80  , Expand);
  setOperationAction(ISD::FLT_ROUNDS_      , MVT::i32  , Custom);

  // Promote the i8 variants and force them on up to i32 which has a shorter
  // encoding.
  setOperationPromotedToType(ISD::CTTZ           , MVT::i8   , MVT::i32);
  setOperationPromotedToType(ISD::CTTZ_ZERO_UNDEF, MVT::i8   , MVT::i32);
  if (!Subtarget.hasBMI()) {
    setOperationAction(ISD::CTTZ           , MVT::i16  , Custom);
    setOperationAction(ISD::CTTZ           , MVT::i32  , Custom);
    setOperationAction(ISD::CTTZ_ZERO_UNDEF, MVT::i16  , Legal);
    setOperationAction(ISD::CTTZ_ZERO_UNDEF, MVT::i32  , Legal);
    if (Subtarget.is64Bit()) {
      setOperationAction(ISD::CTTZ         , MVT::i64  , Custom);
      setOperationAction(ISD::CTTZ_ZERO_UNDEF, MVT::i64, Legal);
    }
  }

  if (Subtarget.hasLZCNT()) {
    // When promoting the i8 variants, force them to i32 for a shorter
    // encoding.
    setOperationPromotedToType(ISD::CTLZ           , MVT::i8   , MVT::i32);
    setOperationPromotedToType(ISD::CTLZ_ZERO_UNDEF, MVT::i8   , MVT::i32);
  } else {
    setOperationAction(ISD::CTLZ           , MVT::i8   , Custom);
    setOperationAction(ISD::CTLZ           , MVT::i16  , Custom);
    setOperationAction(ISD::CTLZ           , MVT::i32  , Custom);
    setOperationAction(ISD::CTLZ_ZERO_UNDEF, MVT::i8   , Custom);
    setOperationAction(ISD::CTLZ_ZERO_UNDEF, MVT::i16  , Custom);
    setOperationAction(ISD::CTLZ_ZERO_UNDEF, MVT::i32  , Custom);
    if (Subtarget.is64Bit()) {
      setOperationAction(ISD::CTLZ         , MVT::i64  , Custom);
      setOperationAction(ISD::CTLZ_ZERO_UNDEF, MVT::i64, Custom);
    }
  }

  // Special handling for half-precision floating point conversions.
  // If we don't have F16C support, then lower half float conversions
  // into library calls.
  if (Subtarget.useSoftFloat() || !Subtarget.hasF16C()) {
    setOperationAction(ISD::FP16_TO_FP, MVT::f32, Expand);
    setOperationAction(ISD::FP_TO_FP16, MVT::f32, Expand);
  }

  // There's never any support for operations beyond MVT::f32.
  setOperationAction(ISD::FP16_TO_FP, MVT::f64, Expand);
  setOperationAction(ISD::FP16_TO_FP, MVT::f80, Expand);
  setOperationAction(ISD::FP_TO_FP16, MVT::f64, Expand);
  setOperationAction(ISD::FP_TO_FP16, MVT::f80, Expand);

  setLoadExtAction(ISD::EXTLOAD, MVT::f32, MVT::f16, Expand);
  setLoadExtAction(ISD::EXTLOAD, MVT::f64, MVT::f16, Expand);
  setLoadExtAction(ISD::EXTLOAD, MVT::f80, MVT::f16, Expand);
  setTruncStoreAction(MVT::f32, MVT::f16, Expand);
  setTruncStoreAction(MVT::f64, MVT::f16, Expand);
  setTruncStoreAction(MVT::f80, MVT::f16, Expand);

  if (Subtarget.hasPOPCNT()) {
    setOperationAction(ISD::CTPOP          , MVT::i8   , Promote);
  } else {
    setOperationAction(ISD::CTPOP          , MVT::i8   , Expand);
    setOperationAction(ISD::CTPOP          , MVT::i16  , Expand);
    setOperationAction(ISD::CTPOP          , MVT::i32  , Expand);
    if (Subtarget.is64Bit())
      setOperationAction(ISD::CTPOP        , MVT::i64  , Expand);
  }

  setOperationAction(ISD::READCYCLECOUNTER , MVT::i64  , Custom);

  if (!Subtarget.hasMOVBE())
    setOperationAction(ISD::BSWAP          , MVT::i16  , Expand);

  // These should be promoted to a larger select which is supported.
  setOperationAction(ISD::SELECT          , MVT::i1   , Promote);
  // X86 wants to expand cmov itself.
  for (auto VT : { MVT::f32, MVT::f64, MVT::f80, MVT::f128 }) {
    setOperationAction(ISD::SELECT, VT, Custom);
    setOperationAction(ISD::SETCC, VT, Custom);
  }
  for (auto VT : { MVT::i8, MVT::i16, MVT::i32, MVT::i64 }) {
    if (VT == MVT::i64 && !Subtarget.is64Bit())
      continue;
    setOperationAction(ISD::SELECT, VT, Custom);
    setOperationAction(ISD::SETCC,  VT, Custom);
  }

  // Custom action for SELECT MMX and expand action for SELECT_CC MMX
  setOperationAction(ISD::SELECT, MVT::x86mmx, Custom);
  setOperationAction(ISD::SELECT_CC, MVT::x86mmx, Expand);

  setOperationAction(ISD::EH_RETURN       , MVT::Other, Custom);
  // NOTE: EH_SJLJ_SETJMP/_LONGJMP are not recommended, since
  // LLVM/Clang supports zero-cost DWARF and SEH exception handling.
  setOperationAction(ISD::EH_SJLJ_SETJMP, MVT::i32, Custom);
  setOperationAction(ISD::EH_SJLJ_LONGJMP, MVT::Other, Custom);
  setOperationAction(ISD::EH_SJLJ_SETUP_DISPATCH, MVT::Other, Custom);
  if (TM.Options.ExceptionModel == ExceptionHandling::SjLj)
    setLibcallName(RTLIB::UNWIND_RESUME, "_Unwind_SjLj_Resume");

  // Darwin ABI issue.
  for (auto VT : { MVT::i32, MVT::i64 }) {
    if (VT == MVT::i64 && !Subtarget.is64Bit())
      continue;
    setOperationAction(ISD::ConstantPool    , VT, Custom);
    setOperationAction(ISD::JumpTable       , VT, Custom);
    setOperationAction(ISD::GlobalAddress   , VT, Custom);
    setOperationAction(ISD::GlobalTLSAddress, VT, Custom);
    setOperationAction(ISD::ExternalSymbol  , VT, Custom);
    setOperationAction(ISD::BlockAddress    , VT, Custom);
  }

  // 64-bit shl, sra, srl (iff 32-bit x86)
  for (auto VT : { MVT::i32, MVT::i64 }) {
    if (VT == MVT::i64 && !Subtarget.is64Bit())
      continue;
    setOperationAction(ISD::SHL_PARTS, VT, Custom);
    setOperationAction(ISD::SRA_PARTS, VT, Custom);
    setOperationAction(ISD::SRL_PARTS, VT, Custom);
  }

  if (Subtarget.hasSSE1())
    setOperationAction(ISD::PREFETCH      , MVT::Other, Legal);

  setOperationAction(ISD::ATOMIC_FENCE  , MVT::Other, Custom);

  // Expand certain atomics
  for (auto VT : { MVT::i8, MVT::i16, MVT::i32, MVT::i64 }) {
    setOperationAction(ISD::ATOMIC_CMP_SWAP_WITH_SUCCESS, VT, Custom);
    setOperationAction(ISD::ATOMIC_LOAD_SUB, VT, Custom);
    setOperationAction(ISD::ATOMIC_LOAD_ADD, VT, Custom);
    setOperationAction(ISD::ATOMIC_LOAD_OR, VT, Custom);
    setOperationAction(ISD::ATOMIC_LOAD_XOR, VT, Custom);
    setOperationAction(ISD::ATOMIC_LOAD_AND, VT, Custom);
    setOperationAction(ISD::ATOMIC_STORE, VT, Custom);
  }

  if (Subtarget.hasCmpxchg16b()) {
    setOperationAction(ISD::ATOMIC_CMP_SWAP_WITH_SUCCESS, MVT::i128, Custom);
  }

  // FIXME - use subtarget debug flags
  if (!Subtarget.isTargetDarwin() && !Subtarget.isTargetELF() &&
      !Subtarget.isTargetCygMing() && !Subtarget.isTargetWin64() &&
      TM.Options.ExceptionModel != ExceptionHandling::SjLj) {
    setOperationAction(ISD::EH_LABEL, MVT::Other, Expand);
  }

  setOperationAction(ISD::FRAME_TO_ARGS_OFFSET, MVT::i32, Custom);
  setOperationAction(ISD::FRAME_TO_ARGS_OFFSET, MVT::i64, Custom);

  setOperationAction(ISD::INIT_TRAMPOLINE, MVT::Other, Custom);
  setOperationAction(ISD::ADJUST_TRAMPOLINE, MVT::Other, Custom);

  setOperationAction(ISD::TRAP, MVT::Other, Legal);
  setOperationAction(ISD::DEBUGTRAP, MVT::Other, Legal);

  // VASTART needs to be custom lowered to use the VarArgsFrameIndex
  setOperationAction(ISD::VASTART           , MVT::Other, Custom);
  setOperationAction(ISD::VAEND             , MVT::Other, Expand);
  bool Is64Bit = Subtarget.is64Bit();
  setOperationAction(ISD::VAARG,  MVT::Other, Is64Bit ? Custom : Expand);
  setOperationAction(ISD::VACOPY, MVT::Other, Is64Bit ? Custom : Expand);

  setOperationAction(ISD::STACKSAVE,          MVT::Other, Expand);
  setOperationAction(ISD::STACKRESTORE,       MVT::Other, Expand);

  setOperationAction(ISD::DYNAMIC_STACKALLOC, PtrVT, Custom);

  // GC_TRANSITION_START and GC_TRANSITION_END need custom lowering.
  setOperationAction(ISD::GC_TRANSITION_START, MVT::Other, Custom);
  setOperationAction(ISD::GC_TRANSITION_END, MVT::Other, Custom);

  if (!Subtarget.useSoftFloat() && X86ScalarSSEf64) {
    // f32 and f64 use SSE.
    // Set up the FP register classes.
    addRegisterClass(MVT::f32, Subtarget.hasAVX512() ? &X86::FR32XRegClass
                                                     : &X86::FR32RegClass);
    addRegisterClass(MVT::f64, Subtarget.hasAVX512() ? &X86::FR64XRegClass
                                                     : &X86::FR64RegClass);

    for (auto VT : { MVT::f32, MVT::f64 }) {
      // Use ANDPD to simulate FABS.
      setOperationAction(ISD::FABS, VT, Custom);

      // Use XORP to simulate FNEG.
      setOperationAction(ISD::FNEG, VT, Custom);

      // Use ANDPD and ORPD to simulate FCOPYSIGN.
      setOperationAction(ISD::FCOPYSIGN, VT, Custom);

      // We don't support sin/cos/fmod
      setOperationAction(ISD::FSIN   , VT, Expand);
      setOperationAction(ISD::FCOS   , VT, Expand);
      setOperationAction(ISD::FSINCOS, VT, Expand);
    }

    // Lower this to MOVMSK plus an AND.
    setOperationAction(ISD::FGETSIGN, MVT::i64, Custom);
    setOperationAction(ISD::FGETSIGN, MVT::i32, Custom);

    // Expand FP immediates into loads from the stack, except for the special
    // cases we handle.
    addLegalFPImmediate(APFloat(+0.0)); // xorpd
    addLegalFPImmediate(APFloat(+0.0f)); // xorps
  } else if (UseX87 && X86ScalarSSEf32) {
    // Use SSE for f32, x87 for f64.
    // Set up the FP register classes.
    addRegisterClass(MVT::f32, Subtarget.hasAVX512() ? &X86::FR32XRegClass
                                                     : &X86::FR32RegClass);
    addRegisterClass(MVT::f64, &X86::RFP64RegClass);

    // Use ANDPS to simulate FABS.
    setOperationAction(ISD::FABS , MVT::f32, Custom);

    // Use XORP to simulate FNEG.
    setOperationAction(ISD::FNEG , MVT::f32, Custom);

    setOperationAction(ISD::UNDEF,     MVT::f64, Expand);

    // Use ANDPS and ORPS to simulate FCOPYSIGN.
    setOperationAction(ISD::FCOPYSIGN, MVT::f64, Expand);
    setOperationAction(ISD::FCOPYSIGN, MVT::f32, Custom);

    // We don't support sin/cos/fmod
    setOperationAction(ISD::FSIN   , MVT::f32, Expand);
    setOperationAction(ISD::FCOS   , MVT::f32, Expand);
    setOperationAction(ISD::FSINCOS, MVT::f32, Expand);

    // Special cases we handle for FP constants.
    addLegalFPImmediate(APFloat(+0.0f)); // xorps
    addLegalFPImmediate(APFloat(+0.0)); // FLD0
    addLegalFPImmediate(APFloat(+1.0)); // FLD1
    addLegalFPImmediate(APFloat(-0.0)); // FLD0/FCHS
    addLegalFPImmediate(APFloat(-1.0)); // FLD1/FCHS

    // Always expand sin/cos functions even though x87 has an instruction.
    setOperationAction(ISD::FSIN   , MVT::f64, Expand);
    setOperationAction(ISD::FCOS   , MVT::f64, Expand);
    setOperationAction(ISD::FSINCOS, MVT::f64, Expand);
  } else if (UseX87) {
    // f32 and f64 in x87.
    // Set up the FP register classes.
    addRegisterClass(MVT::f64, &X86::RFP64RegClass);
    addRegisterClass(MVT::f32, &X86::RFP32RegClass);

    for (auto VT : { MVT::f32, MVT::f64 }) {
      setOperationAction(ISD::UNDEF,     VT, Expand);
      setOperationAction(ISD::FCOPYSIGN, VT, Expand);

      // Always expand sin/cos functions even though x87 has an instruction.
      setOperationAction(ISD::FSIN   , VT, Expand);
      setOperationAction(ISD::FCOS   , VT, Expand);
      setOperationAction(ISD::FSINCOS, VT, Expand);
    }
    addLegalFPImmediate(APFloat(+0.0)); // FLD0
    addLegalFPImmediate(APFloat(+1.0)); // FLD1
    addLegalFPImmediate(APFloat(-0.0)); // FLD0/FCHS
    addLegalFPImmediate(APFloat(-1.0)); // FLD1/FCHS
    addLegalFPImmediate(APFloat(+0.0f)); // FLD0
    addLegalFPImmediate(APFloat(+1.0f)); // FLD1
    addLegalFPImmediate(APFloat(-0.0f)); // FLD0/FCHS
    addLegalFPImmediate(APFloat(-1.0f)); // FLD1/FCHS
  }

  // We don't support FMA.
  setOperationAction(ISD::FMA, MVT::f64, Expand);
  setOperationAction(ISD::FMA, MVT::f32, Expand);

  // Long double always uses X87, except f128 in MMX.
  if (UseX87) {
    if (Subtarget.is64Bit() && Subtarget.hasMMX()) {
      addRegisterClass(MVT::f128, &X86::FR128RegClass);
      ValueTypeActions.setTypeAction(MVT::f128, TypeSoftenFloat);
      setOperationAction(ISD::FABS , MVT::f128, Custom);
      setOperationAction(ISD::FNEG , MVT::f128, Custom);
      setOperationAction(ISD::FCOPYSIGN, MVT::f128, Custom);
    }

    addRegisterClass(MVT::f80, &X86::RFP80RegClass);
    setOperationAction(ISD::UNDEF,     MVT::f80, Expand);
    setOperationAction(ISD::FCOPYSIGN, MVT::f80, Expand);
    {
      APFloat TmpFlt = APFloat::getZero(APFloat::x87DoubleExtended());
      addLegalFPImmediate(TmpFlt);  // FLD0
      TmpFlt.changeSign();
      addLegalFPImmediate(TmpFlt);  // FLD0/FCHS

      bool ignored;
      APFloat TmpFlt2(+1.0);
      TmpFlt2.convert(APFloat::x87DoubleExtended(), APFloat::rmNearestTiesToEven,
                      &ignored);
      addLegalFPImmediate(TmpFlt2);  // FLD1
      TmpFlt2.changeSign();
      addLegalFPImmediate(TmpFlt2);  // FLD1/FCHS
    }

    // Always expand sin/cos functions even though x87 has an instruction.
    setOperationAction(ISD::FSIN   , MVT::f80, Expand);
    setOperationAction(ISD::FCOS   , MVT::f80, Expand);
    setOperationAction(ISD::FSINCOS, MVT::f80, Expand);

    setOperationAction(ISD::FFLOOR, MVT::f80, Expand);
    setOperationAction(ISD::FCEIL,  MVT::f80, Expand);
    setOperationAction(ISD::FTRUNC, MVT::f80, Expand);
    setOperationAction(ISD::FRINT,  MVT::f80, Expand);
    setOperationAction(ISD::FNEARBYINT, MVT::f80, Expand);
    setOperationAction(ISD::FMA, MVT::f80, Expand);
  }

  // Always use a library call for pow.
  setOperationAction(ISD::FPOW             , MVT::f32  , Expand);
  setOperationAction(ISD::FPOW             , MVT::f64  , Expand);
  setOperationAction(ISD::FPOW             , MVT::f80  , Expand);

  setOperationAction(ISD::FLOG, MVT::f80, Expand);
  setOperationAction(ISD::FLOG2, MVT::f80, Expand);
  setOperationAction(ISD::FLOG10, MVT::f80, Expand);
  setOperationAction(ISD::FEXP, MVT::f80, Expand);
  setOperationAction(ISD::FEXP2, MVT::f80, Expand);
  setOperationAction(ISD::FMINNUM, MVT::f80, Expand);
  setOperationAction(ISD::FMAXNUM, MVT::f80, Expand);

  // Some FP actions are always expanded for vector types.
  for (auto VT : { MVT::v4f32, MVT::v8f32, MVT::v16f32,
                   MVT::v2f64, MVT::v4f64, MVT::v8f64 }) {
    setOperationAction(ISD::FSIN,      VT, Expand);
    setOperationAction(ISD::FSINCOS,   VT, Expand);
    setOperationAction(ISD::FCOS,      VT, Expand);
    setOperationAction(ISD::FREM,      VT, Expand);
    setOperationAction(ISD::FCOPYSIGN, VT, Expand);
    setOperationAction(ISD::FPOW,      VT, Expand);
    setOperationAction(ISD::FLOG,      VT, Expand);
    setOperationAction(ISD::FLOG2,     VT, Expand);
    setOperationAction(ISD::FLOG10,    VT, Expand);
    setOperationAction(ISD::FEXP,      VT, Expand);
    setOperationAction(ISD::FEXP2,     VT, Expand);
  }

  // First set operation action for all vector types to either promote
  // (for widening) or expand (for scalarization). Then we will selectively
  // turn on ones that can be effectively codegen'd.
  for (MVT VT : MVT::vector_valuetypes()) {
    setOperationAction(ISD::SDIV, VT, Expand);
    setOperationAction(ISD::UDIV, VT, Expand);
    setOperationAction(ISD::SREM, VT, Expand);
    setOperationAction(ISD::UREM, VT, Expand);
    setOperationAction(ISD::EXTRACT_VECTOR_ELT, VT,Expand);
    setOperationAction(ISD::INSERT_VECTOR_ELT, VT, Expand);
    setOperationAction(ISD::EXTRACT_SUBVECTOR, VT,Expand);
    setOperationAction(ISD::INSERT_SUBVECTOR, VT,Expand);
    setOperationAction(ISD::FMA,  VT, Expand);
    setOperationAction(ISD::FFLOOR, VT, Expand);
    setOperationAction(ISD::FCEIL, VT, Expand);
    setOperationAction(ISD::FTRUNC, VT, Expand);
    setOperationAction(ISD::FRINT, VT, Expand);
    setOperationAction(ISD::FNEARBYINT, VT, Expand);
    setOperationAction(ISD::SMUL_LOHI, VT, Expand);
    setOperationAction(ISD::MULHS, VT, Expand);
    setOperationAction(ISD::UMUL_LOHI, VT, Expand);
    setOperationAction(ISD::MULHU, VT, Expand);
    setOperationAction(ISD::SDIVREM, VT, Expand);
    setOperationAction(ISD::UDIVREM, VT, Expand);
    setOperationAction(ISD::CTPOP, VT, Expand);
    setOperationAction(ISD::CTTZ, VT, Expand);
    setOperationAction(ISD::CTLZ, VT, Expand);
    setOperationAction(ISD::ROTL, VT, Expand);
    setOperationAction(ISD::ROTR, VT, Expand);
    setOperationAction(ISD::BSWAP, VT, Expand);
    setOperationAction(ISD::SETCC, VT, Expand);
    setOperationAction(ISD::FP_TO_UINT, VT, Expand);
    setOperationAction(ISD::FP_TO_SINT, VT, Expand);
    setOperationAction(ISD::UINT_TO_FP, VT, Expand);
    setOperationAction(ISD::SINT_TO_FP, VT, Expand);
    setOperationAction(ISD::SIGN_EXTEND_INREG, VT,Expand);
    setOperationAction(ISD::TRUNCATE, VT, Expand);
    setOperationAction(ISD::SIGN_EXTEND, VT, Expand);
    setOperationAction(ISD::ZERO_EXTEND, VT, Expand);
    setOperationAction(ISD::ANY_EXTEND, VT, Expand);
    setOperationAction(ISD::SELECT_CC, VT, Expand);
    for (MVT InnerVT : MVT::vector_valuetypes()) {
      setTruncStoreAction(InnerVT, VT, Expand);

      setLoadExtAction(ISD::SEXTLOAD, InnerVT, VT, Expand);
      setLoadExtAction(ISD::ZEXTLOAD, InnerVT, VT, Expand);

      // N.b. ISD::EXTLOAD legality is basically ignored except for i1-like
      // types, we have to deal with them whether we ask for Expansion or not.
      // Setting Expand causes its own optimisation problems though, so leave
      // them legal.
      if (VT.getVectorElementType() == MVT::i1)
        setLoadExtAction(ISD::EXTLOAD, InnerVT, VT, Expand);

      // EXTLOAD for MVT::f16 vectors is not legal because f16 vectors are
      // split/scalarized right now.
      if (VT.getVectorElementType() == MVT::f16)
        setLoadExtAction(ISD::EXTLOAD, InnerVT, VT, Expand);
    }
  }

  // FIXME: In order to prevent SSE instructions being expanded to MMX ones
  // with -msoft-float, disable use of MMX as well.
  if (!Subtarget.useSoftFloat() && Subtarget.hasMMX()) {
    addRegisterClass(MVT::x86mmx, &X86::VR64RegClass);
    // No operations on x86mmx supported, everything uses intrinsics.
  }

  if (!Subtarget.useSoftFloat() && Subtarget.hasSSE1()) {
    addRegisterClass(MVT::v4f32, Subtarget.hasVLX() ? &X86::VR128XRegClass
                                                    : &X86::VR128RegClass);

    setOperationAction(ISD::FNEG,               MVT::v4f32, Custom);
    setOperationAction(ISD::FABS,               MVT::v4f32, Custom);
    setOperationAction(ISD::FCOPYSIGN,          MVT::v4f32, Custom);
    setOperationAction(ISD::BUILD_VECTOR,       MVT::v4f32, Custom);
    setOperationAction(ISD::VECTOR_SHUFFLE,     MVT::v4f32, Custom);
    setOperationAction(ISD::VSELECT,            MVT::v4f32, Custom);
    setOperationAction(ISD::EXTRACT_VECTOR_ELT, MVT::v4f32, Custom);
    setOperationAction(ISD::SELECT,             MVT::v4f32, Custom);
    setOperationAction(ISD::UINT_TO_FP,         MVT::v4i32, Custom);
  }

  if (!Subtarget.useSoftFloat() && Subtarget.hasSSE2()) {
    addRegisterClass(MVT::v2f64, Subtarget.hasVLX() ? &X86::VR128XRegClass
                                                    : &X86::VR128RegClass);

    // FIXME: Unfortunately, -soft-float and -no-implicit-float mean XMM
    // registers cannot be used even for integer operations.
    addRegisterClass(MVT::v16i8, Subtarget.hasVLX() ? &X86::VR128XRegClass
                                                    : &X86::VR128RegClass);
    addRegisterClass(MVT::v8i16, Subtarget.hasVLX() ? &X86::VR128XRegClass
                                                    : &X86::VR128RegClass);
    addRegisterClass(MVT::v4i32, Subtarget.hasVLX() ? &X86::VR128XRegClass
                                                    : &X86::VR128RegClass);
    addRegisterClass(MVT::v2i64, Subtarget.hasVLX() ? &X86::VR128XRegClass
                                                    : &X86::VR128RegClass);

    setOperationAction(ISD::MUL,                MVT::v16i8, Custom);
    setOperationAction(ISD::MUL,                MVT::v4i32, Custom);
    setOperationAction(ISD::MUL,                MVT::v2i64, Custom);
    setOperationAction(ISD::UMUL_LOHI,          MVT::v4i32, Custom);
    setOperationAction(ISD::SMUL_LOHI,          MVT::v4i32, Custom);
    setOperationAction(ISD::MULHU,              MVT::v16i8, Custom);
    setOperationAction(ISD::MULHS,              MVT::v16i8, Custom);
    setOperationAction(ISD::MULHU,              MVT::v8i16, Legal);
    setOperationAction(ISD::MULHS,              MVT::v8i16, Legal);
    setOperationAction(ISD::MUL,                MVT::v8i16, Legal);
    setOperationAction(ISD::FNEG,               MVT::v2f64, Custom);
    setOperationAction(ISD::FABS,               MVT::v2f64, Custom);
    setOperationAction(ISD::FCOPYSIGN,          MVT::v2f64, Custom);

    setOperationAction(ISD::SMAX,               MVT::v8i16, Legal);
    setOperationAction(ISD::UMAX,               MVT::v16i8, Legal);
    setOperationAction(ISD::SMIN,               MVT::v8i16, Legal);
    setOperationAction(ISD::UMIN,               MVT::v16i8, Legal);

    setOperationAction(ISD::INSERT_VECTOR_ELT,  MVT::v8i16, Custom);
    setOperationAction(ISD::INSERT_VECTOR_ELT,  MVT::v4i32, Custom);
    setOperationAction(ISD::INSERT_VECTOR_ELT,  MVT::v4f32, Custom);

    for (auto VT : { MVT::v16i8, MVT::v8i16, MVT::v4i32, MVT::v2i64 }) {
      setOperationAction(ISD::SETCC,              VT, Custom);
      setOperationAction(ISD::CTPOP,              VT, Custom);
      setOperationAction(ISD::CTTZ,               VT, Custom);
    }

    for (auto VT : { MVT::v16i8, MVT::v8i16, MVT::v4i32 }) {
      setOperationAction(ISD::SCALAR_TO_VECTOR,   VT, Custom);
      setOperationAction(ISD::BUILD_VECTOR,       VT, Custom);
      setOperationAction(ISD::VECTOR_SHUFFLE,     VT, Custom);
      setOperationAction(ISD::VSELECT,            VT, Custom);
      setOperationAction(ISD::EXTRACT_VECTOR_ELT, VT, Custom);
    }

    // We support custom legalizing of sext and anyext loads for specific
    // memory vector types which we can load as a scalar (or sequence of
    // scalars) and extend in-register to a legal 128-bit vector type. For sext
    // loads these must work with a single scalar load.
    for (MVT VT : MVT::integer_vector_valuetypes()) {
      setLoadExtAction(ISD::SEXTLOAD, VT, MVT::v4i8, Custom);
      setLoadExtAction(ISD::SEXTLOAD, VT, MVT::v4i16, Custom);
      setLoadExtAction(ISD::SEXTLOAD, VT, MVT::v8i8, Custom);
      setLoadExtAction(ISD::EXTLOAD, VT, MVT::v2i8, Custom);
      setLoadExtAction(ISD::EXTLOAD, VT, MVT::v2i16, Custom);
      setLoadExtAction(ISD::EXTLOAD, VT, MVT::v2i32, Custom);
      setLoadExtAction(ISD::EXTLOAD, VT, MVT::v4i8, Custom);
      setLoadExtAction(ISD::EXTLOAD, VT, MVT::v4i16, Custom);
      setLoadExtAction(ISD::EXTLOAD, VT, MVT::v8i8, Custom);
    }

    for (auto VT : { MVT::v2f64, MVT::v2i64 }) {
      setOperationAction(ISD::BUILD_VECTOR,       VT, Custom);
      setOperationAction(ISD::VECTOR_SHUFFLE,     VT, Custom);
      setOperationAction(ISD::VSELECT,            VT, Custom);

      if (VT == MVT::v2i64 && !Subtarget.is64Bit())
        continue;

      setOperationAction(ISD::INSERT_VECTOR_ELT,  VT, Custom);
      setOperationAction(ISD::EXTRACT_VECTOR_ELT, VT, Custom);
    }

    // Promote v16i8, v8i16, v4i32 load, select, and, or, xor to v2i64.
    for (auto VT : { MVT::v16i8, MVT::v8i16, MVT::v4i32 }) {
      setOperationPromotedToType(ISD::AND,    VT, MVT::v2i64);
      setOperationPromotedToType(ISD::OR,     VT, MVT::v2i64);
      setOperationPromotedToType(ISD::XOR,    VT, MVT::v2i64);
      setOperationPromotedToType(ISD::LOAD,   VT, MVT::v2i64);
      setOperationPromotedToType(ISD::SELECT, VT, MVT::v2i64);
    }

    // Custom lower v2i64 and v2f64 selects.
    setOperationAction(ISD::SELECT,             MVT::v2f64, Custom);
    setOperationAction(ISD::SELECT,             MVT::v2i64, Custom);

    setOperationAction(ISD::FP_TO_SINT,         MVT::v4i32, Legal);
    setOperationAction(ISD::FP_TO_SINT,         MVT::v2i32, Custom);

    setOperationAction(ISD::SINT_TO_FP,         MVT::v4i32, Legal);
    setOperationAction(ISD::SINT_TO_FP,         MVT::v2i32, Custom);

    setOperationAction(ISD::UINT_TO_FP,         MVT::v4i8,  Custom);
    setOperationAction(ISD::UINT_TO_FP,         MVT::v4i16, Custom);
    setOperationAction(ISD::UINT_TO_FP,         MVT::v2i32, Custom);

    // Fast v2f32 UINT_TO_FP( v2i32 ) custom conversion.
    setOperationAction(ISD::UINT_TO_FP,         MVT::v2f32, Custom);

    setOperationAction(ISD::FP_EXTEND,          MVT::v2f32, Custom);
    setOperationAction(ISD::FP_ROUND,           MVT::v2f32, Custom);

    for (MVT VT : MVT::fp_vector_valuetypes())
      setLoadExtAction(ISD::EXTLOAD, VT, MVT::v2f32, Legal);

    setOperationAction(ISD::BITCAST,            MVT::v2i32, Custom);
    setOperationAction(ISD::BITCAST,            MVT::v4i16, Custom);
    setOperationAction(ISD::BITCAST,            MVT::v8i8,  Custom);

    setOperationAction(ISD::SIGN_EXTEND_VECTOR_INREG, MVT::v2i64, Custom);
    setOperationAction(ISD::SIGN_EXTEND_VECTOR_INREG, MVT::v4i32, Custom);
    setOperationAction(ISD::SIGN_EXTEND_VECTOR_INREG, MVT::v8i16, Custom);

    // In the customized shift lowering, the legal v4i32/v2i64 cases
    // in AVX2 will be recognized.
    for (auto VT : { MVT::v16i8, MVT::v8i16, MVT::v4i32, MVT::v2i64 }) {
      setOperationAction(ISD::SRL,              VT, Custom);
      setOperationAction(ISD::SHL,              VT, Custom);
      setOperationAction(ISD::SRA,              VT, Custom);
    }
  }

  if (!Subtarget.useSoftFloat() && Subtarget.hasSSSE3()) {
    setOperationAction(ISD::ABS,                MVT::v16i8, Legal);
    setOperationAction(ISD::ABS,                MVT::v8i16, Legal);
    setOperationAction(ISD::ABS,                MVT::v4i32, Legal);
    setOperationAction(ISD::BITREVERSE,         MVT::v16i8, Custom);
    setOperationAction(ISD::CTLZ,               MVT::v16i8, Custom);
    setOperationAction(ISD::CTLZ,               MVT::v8i16, Custom);
    setOperationAction(ISD::CTLZ,               MVT::v4i32, Custom);
    setOperationAction(ISD::CTLZ,               MVT::v2i64, Custom);
  }

  if (!Subtarget.useSoftFloat() && Subtarget.hasSSE41()) {
    for (MVT RoundedTy : {MVT::f32, MVT::f64, MVT::v4f32, MVT::v2f64}) {
      setOperationAction(ISD::FFLOOR,           RoundedTy,  Legal);
      setOperationAction(ISD::FCEIL,            RoundedTy,  Legal);
      setOperationAction(ISD::FTRUNC,           RoundedTy,  Legal);
      setOperationAction(ISD::FRINT,            RoundedTy,  Legal);
      setOperationAction(ISD::FNEARBYINT,       RoundedTy,  Legal);
    }

    setOperationAction(ISD::SMAX,               MVT::v16i8, Legal);
    setOperationAction(ISD::SMAX,               MVT::v4i32, Legal);
    setOperationAction(ISD::UMAX,               MVT::v8i16, Legal);
    setOperationAction(ISD::UMAX,               MVT::v4i32, Legal);
    setOperationAction(ISD::SMIN,               MVT::v16i8, Legal);
    setOperationAction(ISD::SMIN,               MVT::v4i32, Legal);
    setOperationAction(ISD::UMIN,               MVT::v8i16, Legal);
    setOperationAction(ISD::UMIN,               MVT::v4i32, Legal);

    // FIXME: Do we need to handle scalar-to-vector here?
    setOperationAction(ISD::MUL,                MVT::v4i32, Legal);

    // We directly match byte blends in the backend as they match the VSELECT
    // condition form.
    setOperationAction(ISD::VSELECT,            MVT::v16i8, Legal);

    // SSE41 brings specific instructions for doing vector sign extend even in
    // cases where we don't have SRA.
    for (auto VT : { MVT::v8i16, MVT::v4i32, MVT::v2i64 }) {
      setOperationAction(ISD::SIGN_EXTEND_VECTOR_INREG, VT, Legal);
      setOperationAction(ISD::ZERO_EXTEND_VECTOR_INREG, VT, Legal);
    }

    for (MVT VT : MVT::integer_vector_valuetypes()) {
      setLoadExtAction(ISD::SEXTLOAD, VT, MVT::v2i8, Custom);
      setLoadExtAction(ISD::SEXTLOAD, VT, MVT::v2i16, Custom);
      setLoadExtAction(ISD::SEXTLOAD, VT, MVT::v2i32, Custom);
    }

    // SSE41 also has vector sign/zero extending loads, PMOV[SZ]X
    for (auto LoadExtOp : { ISD::SEXTLOAD, ISD::ZEXTLOAD }) {
      setLoadExtAction(LoadExtOp, MVT::v8i16, MVT::v8i8,  Legal);
      setLoadExtAction(LoadExtOp, MVT::v4i32, MVT::v4i8,  Legal);
      setLoadExtAction(LoadExtOp, MVT::v2i32, MVT::v2i8,  Legal);
      setLoadExtAction(LoadExtOp, MVT::v2i64, MVT::v2i8,  Legal);
      setLoadExtAction(LoadExtOp, MVT::v4i32, MVT::v4i16, Legal);
      setLoadExtAction(LoadExtOp, MVT::v2i64, MVT::v2i16, Legal);
      setLoadExtAction(LoadExtOp, MVT::v2i64, MVT::v2i32, Legal);
    }

    // i8 vectors are custom because the source register and source
    // source memory operand types are not the same width.
    setOperationAction(ISD::INSERT_VECTOR_ELT,  MVT::v16i8, Custom);
  }

  if (!Subtarget.useSoftFloat() && Subtarget.hasXOP()) {
    for (auto VT : { MVT::v16i8, MVT::v8i16,  MVT::v4i32, MVT::v2i64,
                     MVT::v32i8, MVT::v16i16, MVT::v8i32, MVT::v4i64 })
      setOperationAction(ISD::ROTL, VT, Custom);

    // XOP can efficiently perform BITREVERSE with VPPERM.
    for (auto VT : { MVT::i8, MVT::i16, MVT::i32, MVT::i64 })
      setOperationAction(ISD::BITREVERSE, VT, Custom);

    for (auto VT : { MVT::v16i8, MVT::v8i16,  MVT::v4i32, MVT::v2i64,
                     MVT::v32i8, MVT::v16i16, MVT::v8i32, MVT::v4i64 })
      setOperationAction(ISD::BITREVERSE, VT, Custom);
  }

  if (!Subtarget.useSoftFloat() && Subtarget.hasFp256()) {
    bool HasInt256 = Subtarget.hasInt256();

    addRegisterClass(MVT::v32i8,  Subtarget.hasVLX() ? &X86::VR256XRegClass
                                                     : &X86::VR256RegClass);
    addRegisterClass(MVT::v16i16, Subtarget.hasVLX() ? &X86::VR256XRegClass
                                                     : &X86::VR256RegClass);
    addRegisterClass(MVT::v8i32,  Subtarget.hasVLX() ? &X86::VR256XRegClass
                                                     : &X86::VR256RegClass);
    addRegisterClass(MVT::v8f32,  Subtarget.hasVLX() ? &X86::VR256XRegClass
                                                     : &X86::VR256RegClass);
    addRegisterClass(MVT::v4i64,  Subtarget.hasVLX() ? &X86::VR256XRegClass
                                                     : &X86::VR256RegClass);
    addRegisterClass(MVT::v4f64,  Subtarget.hasVLX() ? &X86::VR256XRegClass
                                                     : &X86::VR256RegClass);

    for (auto VT : { MVT::v8f32, MVT::v4f64 }) {
      setOperationAction(ISD::FFLOOR,     VT, Legal);
      setOperationAction(ISD::FCEIL,      VT, Legal);
      setOperationAction(ISD::FTRUNC,     VT, Legal);
      setOperationAction(ISD::FRINT,      VT, Legal);
      setOperationAction(ISD::FNEARBYINT, VT, Legal);
      setOperationAction(ISD::FNEG,       VT, Custom);
      setOperationAction(ISD::FABS,       VT, Custom);
      setOperationAction(ISD::FCOPYSIGN,  VT, Custom);
    }

    // (fp_to_int:v8i16 (v8f32 ..)) requires the result type to be promoted
    // even though v8i16 is a legal type.
    setOperationAction(ISD::FP_TO_SINT,         MVT::v8i16, Promote);
    setOperationAction(ISD::FP_TO_UINT,         MVT::v8i16, Promote);
    setOperationAction(ISD::FP_TO_SINT,         MVT::v8i32, Legal);

    setOperationAction(ISD::SINT_TO_FP,         MVT::v8i16, Promote);
    setOperationAction(ISD::SINT_TO_FP,         MVT::v8i32, Legal);
    setOperationAction(ISD::FP_ROUND,           MVT::v4f32, Legal);

    setOperationAction(ISD::UINT_TO_FP,         MVT::v8i8,  Custom);
    setOperationAction(ISD::UINT_TO_FP,         MVT::v8i16, Custom);

    for (MVT VT : MVT::fp_vector_valuetypes())
      setLoadExtAction(ISD::EXTLOAD, VT, MVT::v4f32, Legal);

    // In the customized shift lowering, the legal v8i32/v4i64 cases
    // in AVX2 will be recognized.
    for (auto VT : { MVT::v32i8, MVT::v16i16, MVT::v8i32, MVT::v4i64 }) {
      setOperationAction(ISD::SRL, VT, Custom);
      setOperationAction(ISD::SHL, VT, Custom);
      setOperationAction(ISD::SRA, VT, Custom);
    }

    setOperationAction(ISD::SELECT,            MVT::v4f64, Custom);
    setOperationAction(ISD::SELECT,            MVT::v4i64, Custom);
    setOperationAction(ISD::SELECT,            MVT::v8f32, Custom);

    for (auto VT : { MVT::v16i16, MVT::v8i32, MVT::v4i64 }) {
      setOperationAction(ISD::SIGN_EXTEND,     VT, Custom);
      setOperationAction(ISD::ZERO_EXTEND,     VT, Custom);
      setOperationAction(ISD::ANY_EXTEND,      VT, Custom);
    }

    setOperationAction(ISD::TRUNCATE,          MVT::v16i8, Custom);
    setOperationAction(ISD::TRUNCATE,          MVT::v8i16, Custom);
    setOperationAction(ISD::TRUNCATE,          MVT::v4i32, Custom);
    setOperationAction(ISD::BITREVERSE,        MVT::v32i8, Custom);

    for (auto VT : { MVT::v32i8, MVT::v16i16, MVT::v8i32, MVT::v4i64 }) {
      setOperationAction(ISD::SETCC,           VT, Custom);
      setOperationAction(ISD::CTPOP,           VT, Custom);
      setOperationAction(ISD::CTTZ,            VT, Custom);
      setOperationAction(ISD::CTLZ,            VT, Custom);
    }

    if (Subtarget.hasAnyFMA()) {
      for (auto VT : { MVT::f32, MVT::f64, MVT::v4f32, MVT::v8f32,
                       MVT::v2f64, MVT::v4f64 })
        setOperationAction(ISD::FMA, VT, Legal);
    }

    for (auto VT : { MVT::v32i8, MVT::v16i16, MVT::v8i32, MVT::v4i64 }) {
      setOperationAction(ISD::ADD, VT, HasInt256 ? Legal : Custom);
      setOperationAction(ISD::SUB, VT, HasInt256 ? Legal : Custom);
    }

    setOperationAction(ISD::MUL,       MVT::v4i64,  Custom);
    setOperationAction(ISD::MUL,       MVT::v8i32,  HasInt256 ? Legal : Custom);
    setOperationAction(ISD::MUL,       MVT::v16i16, HasInt256 ? Legal : Custom);
    setOperationAction(ISD::MUL,       MVT::v32i8,  Custom);

    setOperationAction(ISD::UMUL_LOHI, MVT::v8i32,  Custom);
    setOperationAction(ISD::SMUL_LOHI, MVT::v8i32,  Custom);

    setOperationAction(ISD::MULHU,     MVT::v16i16, HasInt256 ? Legal : Custom);
    setOperationAction(ISD::MULHS,     MVT::v16i16, HasInt256 ? Legal : Custom);
    setOperationAction(ISD::MULHU,     MVT::v32i8,  Custom);
    setOperationAction(ISD::MULHS,     MVT::v32i8,  Custom);

    for (auto VT : { MVT::v32i8, MVT::v16i16, MVT::v8i32 }) {
      setOperationAction(ISD::ABS,  VT, HasInt256 ? Legal : Custom);
      setOperationAction(ISD::SMAX, VT, HasInt256 ? Legal : Custom);
      setOperationAction(ISD::UMAX, VT, HasInt256 ? Legal : Custom);
      setOperationAction(ISD::SMIN, VT, HasInt256 ? Legal : Custom);
      setOperationAction(ISD::UMIN, VT, HasInt256 ? Legal : Custom);
    }

    if (HasInt256) {
      setOperationAction(ISD::SIGN_EXTEND_VECTOR_INREG, MVT::v4i64,  Custom);
      setOperationAction(ISD::SIGN_EXTEND_VECTOR_INREG, MVT::v8i32,  Custom);
      setOperationAction(ISD::SIGN_EXTEND_VECTOR_INREG, MVT::v16i16, Custom);

      // The custom lowering for UINT_TO_FP for v8i32 becomes interesting
      // when we have a 256bit-wide blend with immediate.
      setOperationAction(ISD::UINT_TO_FP, MVT::v8i32, Custom);

      // AVX2 also has wider vector sign/zero extending loads, VPMOV[SZ]X
      for (auto LoadExtOp : { ISD::SEXTLOAD, ISD::ZEXTLOAD }) {
        setLoadExtAction(LoadExtOp, MVT::v16i16, MVT::v16i8, Legal);
        setLoadExtAction(LoadExtOp, MVT::v8i32,  MVT::v8i8,  Legal);
        setLoadExtAction(LoadExtOp, MVT::v4i64,  MVT::v4i8,  Legal);
        setLoadExtAction(LoadExtOp, MVT::v8i32,  MVT::v8i16, Legal);
        setLoadExtAction(LoadExtOp, MVT::v4i64,  MVT::v4i16, Legal);
        setLoadExtAction(LoadExtOp, MVT::v4i64,  MVT::v4i32, Legal);
      }
    }

    for (auto VT : { MVT::v4i32, MVT::v8i32, MVT::v2i64, MVT::v4i64,
                     MVT::v4f32, MVT::v8f32, MVT::v2f64, MVT::v4f64 }) {
      setOperationAction(ISD::MLOAD,  VT, Legal);
      setOperationAction(ISD::MSTORE, VT, Legal);
    }

    // Extract subvector is special because the value type
    // (result) is 128-bit but the source is 256-bit wide.
    for (auto VT : { MVT::v16i8, MVT::v8i16, MVT::v4i32, MVT::v2i64,
                     MVT::v4f32, MVT::v2f64 }) {
      setOperationAction(ISD::EXTRACT_SUBVECTOR, VT, Legal);
    }

    // Custom lower several nodes for 256-bit types.
    for (MVT VT : { MVT::v32i8, MVT::v16i16, MVT::v8i32, MVT::v4i64,
                    MVT::v8f32, MVT::v4f64 }) {
      setOperationAction(ISD::BUILD_VECTOR,       VT, Custom);
      setOperationAction(ISD::VECTOR_SHUFFLE,     VT, Custom);
      setOperationAction(ISD::VSELECT,            VT, Custom);
      setOperationAction(ISD::INSERT_VECTOR_ELT,  VT, Custom);
      setOperationAction(ISD::EXTRACT_VECTOR_ELT, VT, Custom);
      setOperationAction(ISD::SCALAR_TO_VECTOR,   VT, Custom);
      setOperationAction(ISD::INSERT_SUBVECTOR,   VT, Legal);
      setOperationAction(ISD::CONCAT_VECTORS,     VT, Custom);
    }

    if (HasInt256)
      setOperationAction(ISD::VSELECT,         MVT::v32i8, Legal);

    // Promote v32i8, v16i16, v8i32 select, and, or, xor to v4i64.
    for (auto VT : { MVT::v32i8, MVT::v16i16, MVT::v8i32 }) {
      setOperationPromotedToType(ISD::AND,    VT, MVT::v4i64);
      setOperationPromotedToType(ISD::OR,     VT, MVT::v4i64);
      setOperationPromotedToType(ISD::XOR,    VT, MVT::v4i64);
      setOperationPromotedToType(ISD::LOAD,   VT, MVT::v4i64);
      setOperationPromotedToType(ISD::SELECT, VT, MVT::v4i64);
    }
  }

  if (!Subtarget.useSoftFloat() && Subtarget.hasAVX512()) {
    addRegisterClass(MVT::v16i32, &X86::VR512RegClass);
    addRegisterClass(MVT::v16f32, &X86::VR512RegClass);
    addRegisterClass(MVT::v8i64,  &X86::VR512RegClass);
    addRegisterClass(MVT::v8f64,  &X86::VR512RegClass);

    addRegisterClass(MVT::v1i1,   &X86::VK1RegClass);
    addRegisterClass(MVT::v8i1,   &X86::VK8RegClass);
    addRegisterClass(MVT::v16i1,  &X86::VK16RegClass);

    for (MVT VT : MVT::fp_vector_valuetypes())
      setLoadExtAction(ISD::EXTLOAD, VT, MVT::v8f32, Legal);

    for (auto ExtType : {ISD::ZEXTLOAD, ISD::SEXTLOAD}) {
      setLoadExtAction(ExtType, MVT::v16i32, MVT::v16i8,  Legal);
      setLoadExtAction(ExtType, MVT::v16i32, MVT::v16i16, Legal);
      setLoadExtAction(ExtType, MVT::v8i64,  MVT::v8i8,   Legal);
      setLoadExtAction(ExtType, MVT::v8i64,  MVT::v8i16,  Legal);
      setLoadExtAction(ExtType, MVT::v8i64,  MVT::v8i32,  Legal);
    }

    for (MVT VT : {MVT::v2i64, MVT::v4i32, MVT::v8i32, MVT::v4i64, MVT::v8i16,
                   MVT::v16i8, MVT::v16i16, MVT::v32i8, MVT::v16i32,
                   MVT::v8i64, MVT::v32i16, MVT::v64i8}) {
      MVT MaskVT = MVT::getVectorVT(MVT::i1, VT.getVectorNumElements());
      setLoadExtAction(ISD::SEXTLOAD, VT, MaskVT, Custom);
      setLoadExtAction(ISD::ZEXTLOAD, VT, MaskVT, Custom);
      setLoadExtAction(ISD::EXTLOAD,  VT, MaskVT, Custom);
      setTruncStoreAction(VT, MaskVT, Custom);
    }

    for (MVT VT : { MVT::v16f32, MVT::v8f64 }) {
      setOperationAction(ISD::FNEG,  VT, Custom);
      setOperationAction(ISD::FABS,  VT, Custom);
      setOperationAction(ISD::FMA,   VT, Legal);
      setOperationAction(ISD::FCOPYSIGN, VT, Custom);
    }

    setOperationAction(ISD::FP_TO_SINT,         MVT::v16i32, Legal);
    setOperationAction(ISD::FP_TO_UINT,         MVT::v16i32, Legal);
    setOperationAction(ISD::FP_TO_UINT,         MVT::v16i8, Legal);
    setOperationAction(ISD::FP_TO_UINT,         MVT::v16i16, Legal);
    setOperationAction(ISD::FP_TO_UINT,         MVT::v8i32, Legal);
    setOperationAction(ISD::FP_TO_UINT,         MVT::v4i32, Legal);
    setOperationAction(ISD::FP_TO_UINT,         MVT::v2i32, Custom);
    setOperationAction(ISD::SINT_TO_FP,         MVT::v16i32, Legal);
    setOperationAction(ISD::SINT_TO_FP,         MVT::v8i1,   Custom);
    setOperationAction(ISD::SINT_TO_FP,         MVT::v16i1,  Custom);
    setOperationAction(ISD::SINT_TO_FP,         MVT::v16i8,  Promote);
    setOperationAction(ISD::SINT_TO_FP,         MVT::v16i16, Promote);
    setOperationAction(ISD::UINT_TO_FP,         MVT::v16i32, Legal);
    setOperationAction(ISD::UINT_TO_FP,         MVT::v8i32, Legal);
    setOperationAction(ISD::UINT_TO_FP,         MVT::v4i32, Legal);
    setOperationAction(ISD::UINT_TO_FP,         MVT::v16i8, Custom);
    setOperationAction(ISD::UINT_TO_FP,         MVT::v16i16, Custom);
    setOperationAction(ISD::SINT_TO_FP,         MVT::v16i1, Custom);
    setOperationAction(ISD::UINT_TO_FP,         MVT::v16i1, Custom);
    setOperationAction(ISD::SINT_TO_FP,         MVT::v8i1,  Custom);
    setOperationAction(ISD::UINT_TO_FP,         MVT::v8i1,  Custom);
    setOperationAction(ISD::SINT_TO_FP,         MVT::v4i1,  Custom);
    setOperationAction(ISD::UINT_TO_FP,         MVT::v4i1,  Custom);
    setOperationAction(ISD::SINT_TO_FP,         MVT::v2i1,  Custom);
    setOperationAction(ISD::UINT_TO_FP,         MVT::v2i1,  Custom);
    setOperationAction(ISD::FP_ROUND,           MVT::v8f32, Legal);
    setOperationAction(ISD::FP_EXTEND,          MVT::v8f32, Legal);

    setTruncStoreAction(MVT::v8i64,   MVT::v8i8,   Legal);
    setTruncStoreAction(MVT::v8i64,   MVT::v8i16,  Legal);
    setTruncStoreAction(MVT::v8i64,   MVT::v8i32,  Legal);
    setTruncStoreAction(MVT::v16i32,  MVT::v16i8,  Legal);
    setTruncStoreAction(MVT::v16i32,  MVT::v16i16, Legal);
    if (Subtarget.hasVLX()){
      setTruncStoreAction(MVT::v4i64, MVT::v4i8,  Legal);
      setTruncStoreAction(MVT::v4i64, MVT::v4i16, Legal);
      setTruncStoreAction(MVT::v4i64, MVT::v4i32, Legal);
      setTruncStoreAction(MVT::v8i32, MVT::v8i8,  Legal);
      setTruncStoreAction(MVT::v8i32, MVT::v8i16, Legal);

      setTruncStoreAction(MVT::v2i64, MVT::v2i8,  Legal);
      setTruncStoreAction(MVT::v2i64, MVT::v2i16, Legal);
      setTruncStoreAction(MVT::v2i64, MVT::v2i32, Legal);
      setTruncStoreAction(MVT::v4i32, MVT::v4i8,  Legal);
      setTruncStoreAction(MVT::v4i32, MVT::v4i16, Legal);
    } else {
      for (auto VT : {MVT::v4i32, MVT::v8i32, MVT::v2i64, MVT::v4i64,
           MVT::v4f32, MVT::v8f32, MVT::v2f64, MVT::v4f64}) {
        setOperationAction(ISD::MLOAD,  VT, Custom);
        setOperationAction(ISD::MSTORE, VT, Custom);
      }
    }

    if (Subtarget.hasDQI()) {
      for (auto VT : { MVT::v2i64, MVT::v4i64, MVT::v8i64 }) {
        setOperationAction(ISD::SINT_TO_FP,     VT, Legal);
        setOperationAction(ISD::UINT_TO_FP,     VT, Legal);
        setOperationAction(ISD::FP_TO_SINT,     VT, Legal);
        setOperationAction(ISD::FP_TO_UINT,     VT, Legal);
      }
      if (Subtarget.hasVLX()) {
        // Fast v2f32 SINT_TO_FP( v2i32 ) custom conversion.
        setOperationAction(ISD::SINT_TO_FP,    MVT::v2f32, Custom);
        setOperationAction(ISD::FP_TO_SINT,    MVT::v2f32, Custom);
        setOperationAction(ISD::FP_TO_UINT,    MVT::v2f32, Custom);
      }
    }
    if (Subtarget.hasVLX()) {
      setOperationAction(ISD::SINT_TO_FP,       MVT::v8i32, Legal);
      setOperationAction(ISD::UINT_TO_FP,       MVT::v8i32, Legal);
      setOperationAction(ISD::FP_TO_SINT,       MVT::v8i32, Legal);
      setOperationAction(ISD::FP_TO_UINT,       MVT::v8i32, Legal);
      setOperationAction(ISD::SINT_TO_FP,       MVT::v4i32, Legal);
      setOperationAction(ISD::FP_TO_SINT,       MVT::v4i32, Legal);
      setOperationAction(ISD::FP_TO_UINT,       MVT::v4i32, Legal);
      setOperationAction(ISD::ZERO_EXTEND,      MVT::v4i32, Custom);
      setOperationAction(ISD::ZERO_EXTEND,      MVT::v2i64, Custom);
      setOperationAction(ISD::SIGN_EXTEND,      MVT::v4i32, Custom);
      setOperationAction(ISD::SIGN_EXTEND,      MVT::v2i64, Custom);
    }

    setOperationAction(ISD::TRUNCATE,           MVT::v8i32, Custom);
    setOperationAction(ISD::TRUNCATE,           MVT::v16i16, Custom);
    setOperationAction(ISD::ZERO_EXTEND,        MVT::v16i32, Custom);
    setOperationAction(ISD::ZERO_EXTEND,        MVT::v8i64, Custom);
    setOperationAction(ISD::ANY_EXTEND,         MVT::v16i32, Custom);
    setOperationAction(ISD::ANY_EXTEND,         MVT::v8i64, Custom);
    setOperationAction(ISD::SIGN_EXTEND,        MVT::v16i32, Custom);
    setOperationAction(ISD::SIGN_EXTEND,        MVT::v8i64, Custom);
    setOperationAction(ISD::SIGN_EXTEND,        MVT::v16i8, Custom);
    setOperationAction(ISD::SIGN_EXTEND,        MVT::v8i16, Custom);
    setOperationAction(ISD::SIGN_EXTEND,        MVT::v16i16, Custom);

    for (auto VT : { MVT::v16f32, MVT::v8f64 }) {
      setOperationAction(ISD::FFLOOR,           VT, Legal);
      setOperationAction(ISD::FCEIL,            VT, Legal);
      setOperationAction(ISD::FTRUNC,           VT, Legal);
      setOperationAction(ISD::FRINT,            VT, Legal);
      setOperationAction(ISD::FNEARBYINT,       VT, Legal);
    }

    setOperationAction(ISD::SIGN_EXTEND_VECTOR_INREG, MVT::v8i64,  Custom);
    setOperationAction(ISD::SIGN_EXTEND_VECTOR_INREG, MVT::v16i32, Custom);

    // Without BWI we need to use custom lowering to handle MVT::v64i8 input.
    setOperationAction(ISD::SIGN_EXTEND_VECTOR_INREG, MVT::v64i8, Custom);
    setOperationAction(ISD::ZERO_EXTEND_VECTOR_INREG, MVT::v64i8, Custom);

    setOperationAction(ISD::CONCAT_VECTORS,     MVT::v8f64,  Custom);
    setOperationAction(ISD::CONCAT_VECTORS,     MVT::v8i64,  Custom);
    setOperationAction(ISD::CONCAT_VECTORS,     MVT::v16f32,  Custom);
    setOperationAction(ISD::CONCAT_VECTORS,     MVT::v16i32,  Custom);
    setOperationAction(ISD::CONCAT_VECTORS,     MVT::v16i1,   Custom);

    setOperationAction(ISD::MUL,                MVT::v8i64, Custom);
    setOperationAction(ISD::MUL,                MVT::v16i32, Legal);

    setOperationAction(ISD::UMUL_LOHI,          MVT::v16i32,  Custom);
    setOperationAction(ISD::SMUL_LOHI,          MVT::v16i32,  Custom);

    setOperationAction(ISD::EXTRACT_VECTOR_ELT, MVT::v1i1, Custom);
    setOperationAction(ISD::INSERT_SUBVECTOR,   MVT::v16i1, Custom);
    setOperationAction(ISD::BUILD_VECTOR,       MVT::v1i1, Custom);
    setOperationAction(ISD::SELECT,             MVT::v8f64, Custom);
    setOperationAction(ISD::SELECT,             MVT::v8i64, Custom);
    setOperationAction(ISD::SELECT,             MVT::v16f32, Custom);


    // NonVLX sub-targets extend 128/256 vectors to use the 512 version.
    setOperationAction(ISD::ABS,                MVT::v4i64, Legal);
    setOperationAction(ISD::ABS,                MVT::v2i64, Legal);

    for (auto VT : { MVT::v8i1, MVT::v16i1 }) {
      setOperationAction(ISD::ADD,              VT, Custom);
      setOperationAction(ISD::SUB,              VT, Custom);
      setOperationAction(ISD::MUL,              VT, Custom);
      setOperationAction(ISD::SETCC,            VT, Custom);
      setOperationAction(ISD::SELECT,           VT, Custom);
      setOperationAction(ISD::TRUNCATE,         VT, Custom);

      setOperationAction(ISD::BUILD_VECTOR,     VT, Custom);
      setOperationAction(ISD::EXTRACT_VECTOR_ELT, VT, Custom);
      setOperationAction(ISD::INSERT_VECTOR_ELT, VT, Custom);
      setOperationAction(ISD::VECTOR_SHUFFLE,   VT,  Custom);
      setOperationAction(ISD::VSELECT,          VT,  Expand);
    }

    for (auto VT : { MVT::v16i32, MVT::v8i64 }) {
      setOperationAction(ISD::SMAX,             VT, Legal);
      setOperationAction(ISD::UMAX,             VT, Legal);
      setOperationAction(ISD::SMIN,             VT, Legal);
      setOperationAction(ISD::UMIN,             VT, Legal);
      setOperationAction(ISD::ABS,              VT, Legal);
      setOperationAction(ISD::SRL,              VT, Custom);
      setOperationAction(ISD::SHL,              VT, Custom);
      setOperationAction(ISD::SRA,              VT, Custom);
      setOperationAction(ISD::CTPOP,            VT, Custom);
      setOperationAction(ISD::CTTZ,             VT, Custom);
    }

    // NonVLX sub-targets extend 128/256 vectors to use the 512 version.
    for (auto VT : {MVT::v4i32, MVT::v8i32, MVT::v16i32, MVT::v2i64, MVT::v4i64,
                    MVT::v8i64}) {
      setOperationAction(ISD::ROTL,             VT, Custom);
      setOperationAction(ISD::ROTR,             VT, Custom);
    }

    // Need to promote to 64-bit even though we have 32-bit masked instructions
    // because the IR optimizers rearrange bitcasts around logic ops leaving
    // too many variations to handle if we don't promote them.
    setOperationPromotedToType(ISD::AND, MVT::v16i32, MVT::v8i64);
    setOperationPromotedToType(ISD::OR,  MVT::v16i32, MVT::v8i64);
    setOperationPromotedToType(ISD::XOR, MVT::v16i32, MVT::v8i64);

    if (Subtarget.hasCDI()) {
      // NonVLX sub-targets extend 128/256 vectors to use the 512 version.
      for (auto VT : {MVT::v4i32, MVT::v8i32, MVT::v16i32, MVT::v2i64,
                      MVT::v4i64, MVT::v8i64}) {
        setOperationAction(ISD::CTLZ,            VT, Legal);
        setOperationAction(ISD::CTTZ_ZERO_UNDEF, VT, Custom);
      }
    } // Subtarget.hasCDI()

    if (Subtarget.hasDQI()) {
      // NonVLX sub-targets extend 128/256 vectors to use the 512 version.
      setOperationAction(ISD::MUL,             MVT::v2i64, Legal);
      setOperationAction(ISD::MUL,             MVT::v4i64, Legal);
      setOperationAction(ISD::MUL,             MVT::v8i64, Legal);
    }

    if (Subtarget.hasVPOPCNTDQ()) {
      // VPOPCNTDQ sub-targets extend 128/256 vectors to use the avx512
      // version of popcntd/q.
      for (auto VT : {MVT::v16i32, MVT::v8i64, MVT::v8i32, MVT::v4i64,
                      MVT::v4i32, MVT::v2i64})
        setOperationAction(ISD::CTPOP, VT, Legal);
    }

    // Custom lower several nodes.
    for (auto VT : { MVT::v4i32, MVT::v8i32, MVT::v2i64, MVT::v4i64,
                     MVT::v4f32, MVT::v8f32, MVT::v2f64, MVT::v4f64 }) {
      setOperationAction(ISD::MGATHER,  VT, Custom);
      setOperationAction(ISD::MSCATTER, VT, Custom);
    }

    setOperationAction(ISD::EXTRACT_SUBVECTOR, MVT::v1i1, Legal);

    // Extract subvector is special because the value type
    // (result) is 256-bit but the source is 512-bit wide.
    // 128-bit was made Legal under AVX1.
    for (auto VT : { MVT::v32i8, MVT::v16i16, MVT::v8i32, MVT::v4i64,
                     MVT::v8f32, MVT::v4f64 })
      setOperationAction(ISD::EXTRACT_SUBVECTOR, VT, Legal);
    for (auto VT : { MVT::v2i1, MVT::v4i1, MVT::v8i1,
                     MVT::v16i1, MVT::v32i1, MVT::v64i1 })
      setOperationAction(ISD::EXTRACT_SUBVECTOR, VT, Legal);

    for (auto VT : { MVT::v16i32, MVT::v8i64, MVT::v16f32, MVT::v8f64 }) {
      setOperationAction(ISD::VECTOR_SHUFFLE,      VT, Custom);
      setOperationAction(ISD::INSERT_VECTOR_ELT,   VT, Custom);
      setOperationAction(ISD::BUILD_VECTOR,        VT, Custom);
      setOperationAction(ISD::VSELECT,             VT, Custom);
      setOperationAction(ISD::EXTRACT_VECTOR_ELT,  VT, Custom);
      setOperationAction(ISD::SCALAR_TO_VECTOR,    VT, Custom);
      setOperationAction(ISD::INSERT_SUBVECTOR,    VT, Legal);
      setOperationAction(ISD::MLOAD,               VT, Legal);
      setOperationAction(ISD::MSTORE,              VT, Legal);
      setOperationAction(ISD::MGATHER,             VT, Legal);
      setOperationAction(ISD::MSCATTER,            VT, Custom);
    }
    for (auto VT : { MVT::v64i8, MVT::v32i16, MVT::v16i32 }) {
      setOperationPromotedToType(ISD::LOAD,   VT, MVT::v8i64);
      setOperationPromotedToType(ISD::SELECT, VT, MVT::v8i64);
    }
  }// has  AVX-512

  if (!Subtarget.useSoftFloat() && Subtarget.hasBWI()) {
    addRegisterClass(MVT::v32i16, &X86::VR512RegClass);
    addRegisterClass(MVT::v64i8,  &X86::VR512RegClass);

    addRegisterClass(MVT::v32i1,  &X86::VK32RegClass);
    addRegisterClass(MVT::v64i1,  &X86::VK64RegClass);

    setOperationAction(ISD::ADD,                MVT::v32i1, Custom);
    setOperationAction(ISD::ADD,                MVT::v64i1, Custom);
    setOperationAction(ISD::SUB,                MVT::v32i1, Custom);
    setOperationAction(ISD::SUB,                MVT::v64i1, Custom);
    setOperationAction(ISD::MUL,                MVT::v32i1, Custom);
    setOperationAction(ISD::MUL,                MVT::v64i1, Custom);

    setOperationAction(ISD::SETCC,              MVT::v32i1, Custom);
    setOperationAction(ISD::SETCC,              MVT::v64i1, Custom);
    setOperationAction(ISD::MUL,                MVT::v32i16, Legal);
    setOperationAction(ISD::MUL,                MVT::v64i8, Custom);
    setOperationAction(ISD::MULHS,              MVT::v32i16, Legal);
    setOperationAction(ISD::MULHU,              MVT::v32i16, Legal);
    setOperationAction(ISD::MULHS,              MVT::v64i8, Custom);
    setOperationAction(ISD::MULHU,              MVT::v64i8, Custom);
    setOperationAction(ISD::CONCAT_VECTORS,     MVT::v32i1, Custom);
    setOperationAction(ISD::CONCAT_VECTORS,     MVT::v64i1, Custom);
    setOperationAction(ISD::CONCAT_VECTORS,     MVT::v32i16, Custom);
    setOperationAction(ISD::CONCAT_VECTORS,     MVT::v64i8, Custom);
    setOperationAction(ISD::INSERT_SUBVECTOR,   MVT::v32i1, Custom);
    setOperationAction(ISD::INSERT_SUBVECTOR,   MVT::v64i1, Custom);
    setOperationAction(ISD::INSERT_SUBVECTOR,   MVT::v32i16, Legal);
    setOperationAction(ISD::INSERT_SUBVECTOR,   MVT::v64i8, Legal);
    setOperationAction(ISD::EXTRACT_VECTOR_ELT, MVT::v32i16, Custom);
    setOperationAction(ISD::EXTRACT_VECTOR_ELT, MVT::v64i8, Custom);
    setOperationAction(ISD::EXTRACT_VECTOR_ELT, MVT::v32i1,  Custom);
    setOperationAction(ISD::EXTRACT_VECTOR_ELT, MVT::v64i1, Custom);
    setOperationAction(ISD::SCALAR_TO_VECTOR,   MVT::v32i16, Custom);
    setOperationAction(ISD::SCALAR_TO_VECTOR,   MVT::v64i8, Custom);
    setOperationAction(ISD::SELECT,             MVT::v32i1, Custom);
    setOperationAction(ISD::SELECT,             MVT::v64i1, Custom);
    setOperationAction(ISD::SIGN_EXTEND,        MVT::v32i8, Custom);
    setOperationAction(ISD::ZERO_EXTEND,        MVT::v32i8, Custom);
    setOperationAction(ISD::SIGN_EXTEND,        MVT::v32i16, Custom);
    setOperationAction(ISD::ZERO_EXTEND,        MVT::v32i16, Custom);
    setOperationAction(ISD::ANY_EXTEND,         MVT::v32i16, Custom);
    setOperationAction(ISD::VECTOR_SHUFFLE,     MVT::v32i16, Custom);
    setOperationAction(ISD::VECTOR_SHUFFLE,     MVT::v64i8, Custom);
    setOperationAction(ISD::SIGN_EXTEND,        MVT::v64i8, Custom);
    setOperationAction(ISD::ZERO_EXTEND,        MVT::v64i8, Custom);
    setOperationAction(ISD::INSERT_VECTOR_ELT,  MVT::v32i1, Custom);
    setOperationAction(ISD::INSERT_VECTOR_ELT,  MVT::v64i1, Custom);
    setOperationAction(ISD::INSERT_VECTOR_ELT,  MVT::v32i16, Custom);
    setOperationAction(ISD::INSERT_VECTOR_ELT,  MVT::v64i8, Custom);
    setOperationAction(ISD::TRUNCATE,           MVT::v32i1, Custom);
    setOperationAction(ISD::TRUNCATE,           MVT::v64i1, Custom);
    setOperationAction(ISD::TRUNCATE,           MVT::v32i8, Custom);
    setOperationAction(ISD::VECTOR_SHUFFLE,     MVT::v32i1, Custom);
    setOperationAction(ISD::VECTOR_SHUFFLE,     MVT::v64i1, Custom);
    setOperationAction(ISD::BUILD_VECTOR,       MVT::v32i1, Custom);
    setOperationAction(ISD::BUILD_VECTOR,       MVT::v64i1, Custom);
    setOperationAction(ISD::VSELECT,            MVT::v32i1, Expand);
    setOperationAction(ISD::VSELECT,            MVT::v64i1, Expand);
    setOperationAction(ISD::BITREVERSE,         MVT::v64i8, Custom);

    setOperationAction(ISD::SIGN_EXTEND_VECTOR_INREG, MVT::v32i16, Custom);

    setTruncStoreAction(MVT::v32i16,  MVT::v32i8, Legal);
    if (Subtarget.hasVLX()) {
      setTruncStoreAction(MVT::v16i16,  MVT::v16i8, Legal);
      setTruncStoreAction(MVT::v8i16,   MVT::v8i8,  Legal);
    }

    LegalizeAction Action = Subtarget.hasVLX() ? Legal : Custom;
    for (auto VT : { MVT::v32i8, MVT::v16i8, MVT::v16i16, MVT::v8i16 }) {
      setOperationAction(ISD::MLOAD,               VT, Action);
      setOperationAction(ISD::MSTORE,              VT, Action);
    }

    if (Subtarget.hasCDI()) {
      setOperationAction(ISD::CTLZ,            MVT::v32i16, Custom);
      setOperationAction(ISD::CTLZ,            MVT::v64i8,  Custom);
    }

    for (auto VT : { MVT::v64i8, MVT::v32i16 }) {
      setOperationAction(ISD::BUILD_VECTOR, VT, Custom);
      setOperationAction(ISD::VSELECT,      VT, Custom);
      setOperationAction(ISD::ABS,          VT, Legal);
      setOperationAction(ISD::SRL,          VT, Custom);
      setOperationAction(ISD::SHL,          VT, Custom);
      setOperationAction(ISD::SRA,          VT, Custom);
      setOperationAction(ISD::MLOAD,        VT, Legal);
      setOperationAction(ISD::MSTORE,       VT, Legal);
      setOperationAction(ISD::CTPOP,        VT, Custom);
      setOperationAction(ISD::CTTZ,         VT, Custom);
      setOperationAction(ISD::SMAX,         VT, Legal);
      setOperationAction(ISD::UMAX,         VT, Legal);
      setOperationAction(ISD::SMIN,         VT, Legal);
      setOperationAction(ISD::UMIN,         VT, Legal);

      setOperationPromotedToType(ISD::AND,  VT, MVT::v8i64);
      setOperationPromotedToType(ISD::OR,   VT, MVT::v8i64);
      setOperationPromotedToType(ISD::XOR,  VT, MVT::v8i64);
    }

    for (auto ExtType : {ISD::ZEXTLOAD, ISD::SEXTLOAD}) {
      setLoadExtAction(ExtType, MVT::v32i16, MVT::v32i8, Legal);
    }
  }

  if (!Subtarget.useSoftFloat() && Subtarget.hasVLX()) {
    addRegisterClass(MVT::v4i1,   &X86::VK4RegClass);
    addRegisterClass(MVT::v2i1,   &X86::VK2RegClass);

    for (auto VT : { MVT::v2i1, MVT::v4i1 }) {
      setOperationAction(ISD::ADD,                VT, Custom);
      setOperationAction(ISD::SUB,                VT, Custom);
      setOperationAction(ISD::MUL,                VT, Custom);
      setOperationAction(ISD::VSELECT,            VT, Expand);

      setOperationAction(ISD::TRUNCATE,           VT, Custom);
      setOperationAction(ISD::SETCC,              VT, Custom);
      setOperationAction(ISD::EXTRACT_VECTOR_ELT, VT, Custom);
      setOperationAction(ISD::INSERT_VECTOR_ELT,  VT, Custom);
      setOperationAction(ISD::SELECT,             VT, Custom);
      setOperationAction(ISD::BUILD_VECTOR,       VT, Custom);
      setOperationAction(ISD::VECTOR_SHUFFLE,     VT, Custom);
    }

    setOperationAction(ISD::CONCAT_VECTORS,     MVT::v8i1, Custom);
    setOperationAction(ISD::CONCAT_VECTORS,     MVT::v4i1, Custom);
    setOperationAction(ISD::INSERT_SUBVECTOR,   MVT::v8i1, Custom);
    setOperationAction(ISD::INSERT_SUBVECTOR,   MVT::v4i1, Custom);

    for (auto VT : { MVT::v2i64, MVT::v4i64 }) {
      setOperationAction(ISD::SMAX, VT, Legal);
      setOperationAction(ISD::UMAX, VT, Legal);
      setOperationAction(ISD::SMIN, VT, Legal);
      setOperationAction(ISD::UMIN, VT, Legal);
    }
  }

  // We want to custom lower some of our intrinsics.
  setOperationAction(ISD::INTRINSIC_WO_CHAIN, MVT::Other, Custom);
  setOperationAction(ISD::INTRINSIC_W_CHAIN, MVT::Other, Custom);
  setOperationAction(ISD::INTRINSIC_VOID, MVT::Other, Custom);
  if (!Subtarget.is64Bit()) {
    setOperationAction(ISD::INTRINSIC_W_CHAIN, MVT::i64, Custom);
    setOperationAction(ISD::INTRINSIC_WO_CHAIN, MVT::i64, Custom);
  }

  // Only custom-lower 64-bit SADDO and friends on 64-bit because we don't
  // handle type legalization for these operations here.
  //
  // FIXME: We really should do custom legalization for addition and
  // subtraction on x86-32 once PR3203 is fixed.  We really can't do much better
  // than generic legalization for 64-bit multiplication-with-overflow, though.
  for (auto VT : { MVT::i8, MVT::i16, MVT::i32, MVT::i64 }) {
    if (VT == MVT::i64 && !Subtarget.is64Bit())
      continue;
    // Add/Sub/Mul with overflow operations are custom lowered.
    setOperationAction(ISD::SADDO, VT, Custom);
    setOperationAction(ISD::UADDO, VT, Custom);
    setOperationAction(ISD::SSUBO, VT, Custom);
    setOperationAction(ISD::USUBO, VT, Custom);
    setOperationAction(ISD::SMULO, VT, Custom);
    setOperationAction(ISD::UMULO, VT, Custom);

    // Support carry in as value rather than glue.
    setOperationAction(ISD::ADDCARRY, VT, Custom);
    setOperationAction(ISD::SUBCARRY, VT, Custom);
    setOperationAction(ISD::SETCCCARRY, VT, Custom);
  }

  if (!Subtarget.is64Bit()) {
    // These libcalls are not available in 32-bit.
    setLibcallName(RTLIB::SHL_I128, nullptr);
    setLibcallName(RTLIB::SRL_I128, nullptr);
    setLibcallName(RTLIB::SRA_I128, nullptr);
    setLibcallName(RTLIB::MUL_I128, nullptr);
  }

  // Combine sin / cos into one node or libcall if possible.
  if (Subtarget.hasSinCos()) {
    setLibcallName(RTLIB::SINCOS_F32, "sincosf");
    setLibcallName(RTLIB::SINCOS_F64, "sincos");
    if (Subtarget.isTargetDarwin()) {
      // For MacOSX, we don't want the normal expansion of a libcall to sincos.
      // We want to issue a libcall to __sincos_stret to avoid memory traffic.
      setOperationAction(ISD::FSINCOS, MVT::f64, Custom);
      setOperationAction(ISD::FSINCOS, MVT::f32, Custom);
    }
  }

  if (Subtarget.isTargetWin64()) {
    setOperationAction(ISD::SDIV, MVT::i128, Custom);
    setOperationAction(ISD::UDIV, MVT::i128, Custom);
    setOperationAction(ISD::SREM, MVT::i128, Custom);
    setOperationAction(ISD::UREM, MVT::i128, Custom);
    setOperationAction(ISD::SDIVREM, MVT::i128, Custom);
    setOperationAction(ISD::UDIVREM, MVT::i128, Custom);
  }

  // On 32 bit MSVC, `fmodf(f32)` is not defined - only `fmod(f64)`
  // is. We should promote the value to 64-bits to solve this.
  // This is what the CRT headers do - `fmodf` is an inline header
  // function casting to f64 and calling `fmod`.
  if (Subtarget.is32Bit() && (Subtarget.isTargetKnownWindowsMSVC() ||
                              Subtarget.isTargetWindowsItanium()))
    for (ISD::NodeType Op :
         {ISD::FCEIL, ISD::FCOS, ISD::FEXP, ISD::FFLOOR, ISD::FREM, ISD::FLOG,
          ISD::FLOG10, ISD::FPOW, ISD::FSIN})
      if (isOperationExpand(Op, MVT::f32))
        setOperationAction(Op, MVT::f32, Promote);

  // We have target-specific dag combine patterns for the following nodes:
  setTargetDAGCombine(ISD::VECTOR_SHUFFLE);
  setTargetDAGCombine(ISD::EXTRACT_VECTOR_ELT);
  setTargetDAGCombine(ISD::INSERT_SUBVECTOR);
  setTargetDAGCombine(ISD::EXTRACT_SUBVECTOR);
  setTargetDAGCombine(ISD::BITCAST);
  setTargetDAGCombine(ISD::VSELECT);
  setTargetDAGCombine(ISD::SELECT);
  setTargetDAGCombine(ISD::SHL);
  setTargetDAGCombine(ISD::SRA);
  setTargetDAGCombine(ISD::SRL);
  setTargetDAGCombine(ISD::OR);
  setTargetDAGCombine(ISD::AND);
  setTargetDAGCombine(ISD::ADD);
  setTargetDAGCombine(ISD::FADD);
  setTargetDAGCombine(ISD::FSUB);
  setTargetDAGCombine(ISD::FNEG);
  setTargetDAGCombine(ISD::FMA);
  setTargetDAGCombine(ISD::FMINNUM);
  setTargetDAGCombine(ISD::FMAXNUM);
  setTargetDAGCombine(ISD::SUB);
  setTargetDAGCombine(ISD::LOAD);
  setTargetDAGCombine(ISD::MLOAD);
  setTargetDAGCombine(ISD::STORE);
  setTargetDAGCombine(ISD::MSTORE);
  setTargetDAGCombine(ISD::TRUNCATE);
  setTargetDAGCombine(ISD::ZERO_EXTEND);
  setTargetDAGCombine(ISD::ANY_EXTEND);
  setTargetDAGCombine(ISD::SIGN_EXTEND);
  setTargetDAGCombine(ISD::SIGN_EXTEND_INREG);
  setTargetDAGCombine(ISD::SIGN_EXTEND_VECTOR_INREG);
  setTargetDAGCombine(ISD::ZERO_EXTEND_VECTOR_INREG);
  setTargetDAGCombine(ISD::SINT_TO_FP);
  setTargetDAGCombine(ISD::UINT_TO_FP);
  setTargetDAGCombine(ISD::SETCC);
  setTargetDAGCombine(ISD::MUL);
  setTargetDAGCombine(ISD::XOR);
  setTargetDAGCombine(ISD::MSCATTER);
  setTargetDAGCombine(ISD::MGATHER);

  computeRegisterProperties(Subtarget.getRegisterInfo());

  MaxStoresPerMemset = 16; // For @llvm.memset -> sequence of stores
  MaxStoresPerMemsetOptSize = 8;
  MaxStoresPerMemcpy = 8; // For @llvm.memcpy -> sequence of stores
  MaxStoresPerMemcpyOptSize = 4;
  MaxStoresPerMemmove = 8; // For @llvm.memmove -> sequence of stores
  MaxStoresPerMemmoveOptSize = 4;

  // TODO: These control memcmp expansion in CGP and could be raised higher, but
  // that needs to benchmarked and balanced with the potential use of vector
  // load/store types (PR33329, PR33914).
  MaxLoadsPerMemcmp = 2;
  MaxLoadsPerMemcmpOptSize = 2;

  // Set loop alignment to 2^ExperimentalPrefLoopAlignment bytes (default: 2^4).
  setPrefLoopAlignment(ExperimentalPrefLoopAlignment);

  // An out-of-order CPU can speculatively execute past a predictable branch,
  // but a conditional move could be stalled by an expensive earlier operation.
  PredictableSelectIsExpensive = Subtarget.getSchedModel().isOutOfOrder();
  EnableExtLdPromotion = true;
  setPrefFunctionAlignment(4); // 2^4 bytes.

  verifyIntrinsicTables();
}

// This has so far only been implemented for 64-bit MachO.
bool X86TargetLowering::useLoadStackGuardNode() const {
  return Subtarget.isTargetMachO() && Subtarget.is64Bit();
}

TargetLoweringBase::LegalizeTypeAction
X86TargetLowering::getPreferredVectorAction(EVT VT) const {
  if (ExperimentalVectorWideningLegalization &&
      VT.getVectorNumElements() != 1 &&
      VT.getVectorElementType().getSimpleVT() != MVT::i1)
    return TypeWidenVector;

  return TargetLoweringBase::getPreferredVectorAction(VT);
}

EVT X86TargetLowering::getSetCCResultType(const DataLayout &DL,
                                          LLVMContext& Context,
                                          EVT VT) const {
  if (!VT.isVector())
    return MVT::i8;

  if (VT.isSimple()) {
    MVT VVT = VT.getSimpleVT();
    const unsigned NumElts = VVT.getVectorNumElements();
    MVT EltVT = VVT.getVectorElementType();
    if (VVT.is512BitVector()) {
      if (Subtarget.hasAVX512())
        if (EltVT == MVT::i32 || EltVT == MVT::i64 ||
            EltVT == MVT::f32 || EltVT == MVT::f64)
          switch(NumElts) {
          case  8: return MVT::v8i1;
          case 16: return MVT::v16i1;
        }
      if (Subtarget.hasBWI())
        if (EltVT == MVT::i8 || EltVT == MVT::i16)
          switch(NumElts) {
          case 32: return MVT::v32i1;
          case 64: return MVT::v64i1;
        }
    }

    if (Subtarget.hasBWI() && Subtarget.hasVLX())
      return MVT::getVectorVT(MVT::i1, NumElts);

    if (!isTypeLegal(VT) && getTypeAction(Context, VT) == TypePromoteInteger) {
      EVT LegalVT = getTypeToTransformTo(Context, VT);
      EltVT = LegalVT.getVectorElementType().getSimpleVT();
    }

    if (Subtarget.hasVLX() && EltVT.getSizeInBits() >= 32)
      switch(NumElts) {
      case 2: return MVT::v2i1;
      case 4: return MVT::v4i1;
      case 8: return MVT::v8i1;
      }
  }

  return VT.changeVectorElementTypeToInteger();
}

/// Helper for getByValTypeAlignment to determine
/// the desired ByVal argument alignment.
static void getMaxByValAlign(Type *Ty, unsigned &MaxAlign) {
  if (MaxAlign == 16)
    return;
  if (VectorType *VTy = dyn_cast<VectorType>(Ty)) {
    if (VTy->getBitWidth() == 128)
      MaxAlign = 16;
  } else if (ArrayType *ATy = dyn_cast<ArrayType>(Ty)) {
    unsigned EltAlign = 0;
    getMaxByValAlign(ATy->getElementType(), EltAlign);
    if (EltAlign > MaxAlign)
      MaxAlign = EltAlign;
  } else if (StructType *STy = dyn_cast<StructType>(Ty)) {
    for (auto *EltTy : STy->elements()) {
      unsigned EltAlign = 0;
      getMaxByValAlign(EltTy, EltAlign);
      if (EltAlign > MaxAlign)
        MaxAlign = EltAlign;
      if (MaxAlign == 16)
        break;
    }
  }
}

/// Return the desired alignment for ByVal aggregate
/// function arguments in the caller parameter area. For X86, aggregates
/// that contain SSE vectors are placed at 16-byte boundaries while the rest
/// are at 4-byte boundaries.
unsigned X86TargetLowering::getByValTypeAlignment(Type *Ty,
                                                  const DataLayout &DL) const {
  if (Subtarget.is64Bit()) {
    // Max of 8 and alignment of type.
    unsigned TyAlign = DL.getABITypeAlignment(Ty);
    if (TyAlign > 8)
      return TyAlign;
    return 8;
  }

  unsigned Align = 4;
  if (Subtarget.hasSSE1())
    getMaxByValAlign(Ty, Align);
  return Align;
}

/// Returns the target specific optimal type for load
/// and store operations as a result of memset, memcpy, and memmove
/// lowering. If DstAlign is zero that means it's safe to destination
/// alignment can satisfy any constraint. Similarly if SrcAlign is zero it
/// means there isn't a need to check it against alignment requirement,
/// probably because the source does not need to be loaded. If 'IsMemset' is
/// true, that means it's expanding a memset. If 'ZeroMemset' is true, that
/// means it's a memset of zero. 'MemcpyStrSrc' indicates whether the memcpy
/// source is constant so it does not need to be loaded.
/// It returns EVT::Other if the type should be determined using generic
/// target-independent logic.
EVT
X86TargetLowering::getOptimalMemOpType(uint64_t Size,
                                       unsigned DstAlign, unsigned SrcAlign,
                                       bool IsMemset, bool ZeroMemset,
                                       bool MemcpyStrSrc,
                                       MachineFunction &MF) const {
  const Function *F = MF.getFunction();
  if (!F->hasFnAttribute(Attribute::NoImplicitFloat)) {
    if (Size >= 16 &&
        (!Subtarget.isUnalignedMem16Slow() ||
         ((DstAlign == 0 || DstAlign >= 16) &&
          (SrcAlign == 0 || SrcAlign >= 16)))) {
      // FIXME: Check if unaligned 32-byte accesses are slow.
      if (Size >= 32 && Subtarget.hasAVX()) {
        // Although this isn't a well-supported type for AVX1, we'll let
        // legalization and shuffle lowering produce the optimal codegen. If we
        // choose an optimal type with a vector element larger than a byte,
        // getMemsetStores() may create an intermediate splat (using an integer
        // multiply) before we splat as a vector.
        return MVT::v32i8;
      }
      if (Subtarget.hasSSE2())
        return MVT::v16i8;
      // TODO: Can SSE1 handle a byte vector?
      if (Subtarget.hasSSE1())
        return MVT::v4f32;
    } else if ((!IsMemset || ZeroMemset) && !MemcpyStrSrc && Size >= 8 &&
               !Subtarget.is64Bit() && Subtarget.hasSSE2()) {
      // Do not use f64 to lower memcpy if source is string constant. It's
      // better to use i32 to avoid the loads.
      // Also, do not use f64 to lower memset unless this is a memset of zeros.
      // The gymnastics of splatting a byte value into an XMM register and then
      // only using 8-byte stores (because this is a CPU with slow unaligned
      // 16-byte accesses) makes that a loser.
      return MVT::f64;
    }
  }
  // This is a compromise. If we reach here, unaligned accesses may be slow on
  // this target. However, creating smaller, aligned accesses could be even
  // slower and would certainly be a lot more code.
  if (Subtarget.is64Bit() && Size >= 8)
    return MVT::i64;
  return MVT::i32;
}

bool X86TargetLowering::isSafeMemOpType(MVT VT) const {
  if (VT == MVT::f32)
    return X86ScalarSSEf32;
  else if (VT == MVT::f64)
    return X86ScalarSSEf64;
  return true;
}

bool
X86TargetLowering::allowsMisalignedMemoryAccesses(EVT VT,
                                                  unsigned,
                                                  unsigned,
                                                  bool *Fast) const {
  if (Fast) {
    switch (VT.getSizeInBits()) {
    default:
      // 8-byte and under are always assumed to be fast.
      *Fast = true;
      break;
    case 128:
      *Fast = !Subtarget.isUnalignedMem16Slow();
      break;
    case 256:
      *Fast = !Subtarget.isUnalignedMem32Slow();
      break;
    // TODO: What about AVX-512 (512-bit) accesses?
    }
  }
  // Misaligned accesses of any size are always allowed.
  return true;
}

/// Return the entry encoding for a jump table in the
/// current function.  The returned value is a member of the
/// MachineJumpTableInfo::JTEntryKind enum.
unsigned X86TargetLowering::getJumpTableEncoding() const {
  // In GOT pic mode, each entry in the jump table is emitted as a @GOTOFF
  // symbol.
  if (isPositionIndependent() && Subtarget.isPICStyleGOT())
    return MachineJumpTableInfo::EK_Custom32;

  // Otherwise, use the normal jump table encoding heuristics.
  return TargetLowering::getJumpTableEncoding();
}

bool X86TargetLowering::useSoftFloat() const {
  return Subtarget.useSoftFloat();
}

void X86TargetLowering::markLibCallAttributes(MachineFunction *MF, unsigned CC,
                                              ArgListTy &Args) const {

  // Only relabel X86-32 for C / Stdcall CCs.
  if (Subtarget.is64Bit())
    return;
  if (CC != CallingConv::C && CC != CallingConv::X86_StdCall)
    return;
  unsigned ParamRegs = 0;
  if (auto *M = MF->getFunction()->getParent())
    ParamRegs = M->getNumberRegisterParameters();

  // Mark the first N int arguments as having reg
  for (unsigned Idx = 0; Idx < Args.size(); Idx++) {
    Type *T = Args[Idx].Ty;
    if (T->isPointerTy() || T->isIntegerTy())
      if (MF->getDataLayout().getTypeAllocSize(T) <= 8) {
        unsigned numRegs = 1;
        if (MF->getDataLayout().getTypeAllocSize(T) > 4)
          numRegs = 2;
        if (ParamRegs < numRegs)
          return;
        ParamRegs -= numRegs;
        Args[Idx].IsInReg = true;
      }
  }
}

const MCExpr *
X86TargetLowering::LowerCustomJumpTableEntry(const MachineJumpTableInfo *MJTI,
                                             const MachineBasicBlock *MBB,
                                             unsigned uid,MCContext &Ctx) const{
  assert(isPositionIndependent() && Subtarget.isPICStyleGOT());
  // In 32-bit ELF systems, our jump table entries are formed with @GOTOFF
  // entries.
  return MCSymbolRefExpr::create(MBB->getSymbol(),
                                 MCSymbolRefExpr::VK_GOTOFF, Ctx);
}

/// Returns relocation base for the given PIC jumptable.
SDValue X86TargetLowering::getPICJumpTableRelocBase(SDValue Table,
                                                    SelectionDAG &DAG) const {
  if (!Subtarget.is64Bit())
    // This doesn't have SDLoc associated with it, but is not really the
    // same as a Register.
    return DAG.getNode(X86ISD::GlobalBaseReg, SDLoc(),
                       getPointerTy(DAG.getDataLayout()));
  return Table;
}

/// This returns the relocation base for the given PIC jumptable,
/// the same as getPICJumpTableRelocBase, but as an MCExpr.
const MCExpr *X86TargetLowering::
getPICJumpTableRelocBaseExpr(const MachineFunction *MF, unsigned JTI,
                             MCContext &Ctx) const {
  // X86-64 uses RIP relative addressing based on the jump table label.
  if (Subtarget.isPICStyleRIPRel())
    return TargetLowering::getPICJumpTableRelocBaseExpr(MF, JTI, Ctx);

  // Otherwise, the reference is relative to the PIC base.
  return MCSymbolRefExpr::create(MF->getPICBaseSymbol(), Ctx);
}

std::pair<const TargetRegisterClass *, uint8_t>
X86TargetLowering::findRepresentativeClass(const TargetRegisterInfo *TRI,
                                           MVT VT) const {
  const TargetRegisterClass *RRC = nullptr;
  uint8_t Cost = 1;
  switch (VT.SimpleTy) {
  default:
    return TargetLowering::findRepresentativeClass(TRI, VT);
  case MVT::i8: case MVT::i16: case MVT::i32: case MVT::i64:
    RRC = Subtarget.is64Bit() ? &X86::GR64RegClass : &X86::GR32RegClass;
    break;
  case MVT::x86mmx:
    RRC = &X86::VR64RegClass;
    break;
  case MVT::f32: case MVT::f64:
  case MVT::v16i8: case MVT::v8i16: case MVT::v4i32: case MVT::v2i64:
  case MVT::v4f32: case MVT::v2f64:
  case MVT::v32i8: case MVT::v16i16: case MVT::v8i32: case MVT::v4i64:
  case MVT::v8f32: case MVT::v4f64:
  case MVT::v64i8: case MVT::v32i16: case MVT::v16i32: case MVT::v8i64:
  case MVT::v16f32: case MVT::v8f64:
    RRC = &X86::VR128XRegClass;
    break;
  }
  return std::make_pair(RRC, Cost);
}

unsigned X86TargetLowering::getAddressSpace() const {
  if (Subtarget.is64Bit())
    return (getTargetMachine().getCodeModel() == CodeModel::Kernel) ? 256 : 257;
  return 256;
}

static bool hasStackGuardSlotTLS(const Triple &TargetTriple) {
  return TargetTriple.isOSGlibc() || TargetTriple.isOSFuchsia() ||
         (TargetTriple.isAndroid() && !TargetTriple.isAndroidVersionLT(17));
}

static Constant* SegmentOffset(IRBuilder<> &IRB,
                               unsigned Offset, unsigned AddressSpace) {
  return ConstantExpr::getIntToPtr(
      ConstantInt::get(Type::getInt32Ty(IRB.getContext()), Offset),
      Type::getInt8PtrTy(IRB.getContext())->getPointerTo(AddressSpace));
}

Value *X86TargetLowering::getIRStackGuard(IRBuilder<> &IRB) const {
  // glibc, bionic, and Fuchsia have a special slot for the stack guard in
  // tcbhead_t; use it instead of the usual global variable (see
  // sysdeps/{i386,x86_64}/nptl/tls.h)
  if (hasStackGuardSlotTLS(Subtarget.getTargetTriple())) {
    if (Subtarget.isTargetFuchsia()) {
      // <zircon/tls.h> defines ZX_TLS_STACK_GUARD_OFFSET with this value.
      return SegmentOffset(IRB, 0x10, getAddressSpace());
    } else {
      // %fs:0x28, unless we're using a Kernel code model, in which case
      // it's %gs:0x28.  gs:0x14 on i386.
      unsigned Offset = (Subtarget.is64Bit()) ? 0x28 : 0x14;
      return SegmentOffset(IRB, Offset, getAddressSpace());
    }
  }

  return TargetLowering::getIRStackGuard(IRB);
}

void X86TargetLowering::insertSSPDeclarations(Module &M) const {
  // MSVC CRT provides functionalities for stack protection.
  if (Subtarget.getTargetTriple().isOSMSVCRT()) {
    // MSVC CRT has a global variable holding security cookie.
    M.getOrInsertGlobal("__security_cookie",
                        Type::getInt8PtrTy(M.getContext()));

    // MSVC CRT has a function to validate security cookie.
    auto *SecurityCheckCookie = cast<Function>(
        M.getOrInsertFunction("__security_check_cookie",
                              Type::getVoidTy(M.getContext()),
                              Type::getInt8PtrTy(M.getContext())));
    SecurityCheckCookie->setCallingConv(CallingConv::X86_FastCall);
    SecurityCheckCookie->addAttribute(1, Attribute::AttrKind::InReg);
    return;
  }
  // glibc, bionic, and Fuchsia have a special slot for the stack guard.
  if (hasStackGuardSlotTLS(Subtarget.getTargetTriple()))
    return;
  TargetLowering::insertSSPDeclarations(M);
}

Value *X86TargetLowering::getSDagStackGuard(const Module &M) const {
  // MSVC CRT has a global variable holding security cookie.
  if (Subtarget.getTargetTriple().isOSMSVCRT())
    return M.getGlobalVariable("__security_cookie");
  return TargetLowering::getSDagStackGuard(M);
}

Value *X86TargetLowering::getSSPStackGuardCheck(const Module &M) const {
  // MSVC CRT has a function to validate security cookie.
  if (Subtarget.getTargetTriple().isOSMSVCRT())
    return M.getFunction("__security_check_cookie");
  return TargetLowering::getSSPStackGuardCheck(M);
}

Value *X86TargetLowering::getSafeStackPointerLocation(IRBuilder<> &IRB) const {
  if (Subtarget.getTargetTriple().isOSContiki())
    return getDefaultSafeStackPointerLocation(IRB, false);

  // Android provides a fixed TLS slot for the SafeStack pointer. See the
  // definition of TLS_SLOT_SAFESTACK in
  // https://android.googlesource.com/platform/bionic/+/master/libc/private/bionic_tls.h
  if (Subtarget.isTargetAndroid()) {
    // %fs:0x48, unless we're using a Kernel code model, in which case it's %gs:
    // %gs:0x24 on i386
    unsigned Offset = (Subtarget.is64Bit()) ? 0x48 : 0x24;
    return SegmentOffset(IRB, Offset, getAddressSpace());
  }

  // Fuchsia is similar.
  if (Subtarget.isTargetFuchsia()) {
    // <zircon/tls.h> defines ZX_TLS_UNSAFE_SP_OFFSET with this value.
    return SegmentOffset(IRB, 0x18, getAddressSpace());
  }

  return TargetLowering::getSafeStackPointerLocation(IRB);
}

bool X86TargetLowering::isNoopAddrSpaceCast(unsigned SrcAS,
                                            unsigned DestAS) const {
  assert(SrcAS != DestAS && "Expected different address spaces!");

  return SrcAS < 256 && DestAS < 256;
}

//===----------------------------------------------------------------------===//
//               Return Value Calling Convention Implementation
//===----------------------------------------------------------------------===//

#include "X86GenCallingConv.inc"

bool X86TargetLowering::CanLowerReturn(
    CallingConv::ID CallConv, MachineFunction &MF, bool isVarArg,
    const SmallVectorImpl<ISD::OutputArg> &Outs, LLVMContext &Context) const {
  SmallVector<CCValAssign, 16> RVLocs;
  CCState CCInfo(CallConv, isVarArg, MF, RVLocs, Context);
  return CCInfo.CheckReturn(Outs, RetCC_X86);
}

const MCPhysReg *X86TargetLowering::getScratchRegisters(CallingConv::ID) const {
  static const MCPhysReg ScratchRegs[] = { X86::R11, 0 };
  return ScratchRegs;
}

/// Lowers masks values (v*i1) to the local register values
/// \returns DAG node after lowering to register type
static SDValue lowerMasksToReg(const SDValue &ValArg, const EVT &ValLoc,
                               const SDLoc &Dl, SelectionDAG &DAG) {
  EVT ValVT = ValArg.getValueType();

  if ((ValVT == MVT::v8i1 && (ValLoc == MVT::i8 || ValLoc == MVT::i32)) ||
      (ValVT == MVT::v16i1 && (ValLoc == MVT::i16 || ValLoc == MVT::i32))) {
    // Two stage lowering might be required
    // bitcast:   v8i1 -> i8 / v16i1 -> i16
    // anyextend: i8   -> i32 / i16   -> i32
    EVT TempValLoc = ValVT == MVT::v8i1 ? MVT::i8 : MVT::i16;
    SDValue ValToCopy = DAG.getBitcast(TempValLoc, ValArg);
    if (ValLoc == MVT::i32)
      ValToCopy = DAG.getNode(ISD::ANY_EXTEND, Dl, ValLoc, ValToCopy);
    return ValToCopy;
  } else if ((ValVT == MVT::v32i1 && ValLoc == MVT::i32) ||
             (ValVT == MVT::v64i1 && ValLoc == MVT::i64)) {
    // One stage lowering is required
    // bitcast:   v32i1 -> i32 / v64i1 -> i64
    return DAG.getBitcast(ValLoc, ValArg);
  } else
    return DAG.getNode(ISD::SIGN_EXTEND, Dl, ValLoc, ValArg);
}

/// Breaks v64i1 value into two registers and adds the new node to the DAG
static void Passv64i1ArgInRegs(
    const SDLoc &Dl, SelectionDAG &DAG, SDValue Chain, SDValue &Arg,
    SmallVector<std::pair<unsigned, SDValue>, 8> &RegsToPass, CCValAssign &VA,
    CCValAssign &NextVA, const X86Subtarget &Subtarget) {
  assert((Subtarget.hasBWI() || Subtarget.hasBMI()) &&
         "Expected AVX512BW or AVX512BMI target!");
  assert(Subtarget.is32Bit() && "Expecting 32 bit target");
  assert(Arg.getValueType() == MVT::i64 && "Expecting 64 bit value");
  assert(VA.isRegLoc() && NextVA.isRegLoc() &&
         "The value should reside in two registers");

  // Before splitting the value we cast it to i64
  Arg = DAG.getBitcast(MVT::i64, Arg);

  // Splitting the value into two i32 types
  SDValue Lo, Hi;
  Lo = DAG.getNode(ISD::EXTRACT_ELEMENT, Dl, MVT::i32, Arg,
                   DAG.getConstant(0, Dl, MVT::i32));
  Hi = DAG.getNode(ISD::EXTRACT_ELEMENT, Dl, MVT::i32, Arg,
                   DAG.getConstant(1, Dl, MVT::i32));

  // Attach the two i32 types into corresponding registers
  RegsToPass.push_back(std::make_pair(VA.getLocReg(), Lo));
  RegsToPass.push_back(std::make_pair(NextVA.getLocReg(), Hi));
}

SDValue
X86TargetLowering::LowerReturn(SDValue Chain, CallingConv::ID CallConv,
                               bool isVarArg,
                               const SmallVectorImpl<ISD::OutputArg> &Outs,
                               const SmallVectorImpl<SDValue> &OutVals,
                               const SDLoc &dl, SelectionDAG &DAG) const {
  MachineFunction &MF = DAG.getMachineFunction();
  X86MachineFunctionInfo *FuncInfo = MF.getInfo<X86MachineFunctionInfo>();

  // In some cases we need to disable registers from the default CSR list.
  // For example, when they are used for argument passing.
  bool ShouldDisableCalleeSavedRegister =
      CallConv == CallingConv::X86_RegCall ||
      MF.getFunction()->hasFnAttribute("no_caller_saved_registers");

  if (CallConv == CallingConv::X86_INTR && !Outs.empty())
    report_fatal_error("X86 interrupts may not return any value");

  SmallVector<CCValAssign, 16> RVLocs;
  CCState CCInfo(CallConv, isVarArg, MF, RVLocs, *DAG.getContext());
  CCInfo.AnalyzeReturn(Outs, RetCC_X86);

  SDValue Flag;
  SmallVector<SDValue, 6> RetOps;
  RetOps.push_back(Chain); // Operand #0 = Chain (updated below)
  // Operand #1 = Bytes To Pop
  RetOps.push_back(DAG.getTargetConstant(FuncInfo->getBytesToPopOnReturn(), dl,
                   MVT::i32));

  // Copy the result values into the output registers.
  for (unsigned I = 0, OutsIndex = 0, E = RVLocs.size(); I != E;
       ++I, ++OutsIndex) {
    CCValAssign &VA = RVLocs[I];
    assert(VA.isRegLoc() && "Can only return in registers!");

    // Add the register to the CalleeSaveDisableRegs list.
    if (ShouldDisableCalleeSavedRegister)
      MF.getRegInfo().disableCalleeSavedRegister(VA.getLocReg());

    SDValue ValToCopy = OutVals[OutsIndex];
    EVT ValVT = ValToCopy.getValueType();

    // Promote values to the appropriate types.
    if (VA.getLocInfo() == CCValAssign::SExt)
      ValToCopy = DAG.getNode(ISD::SIGN_EXTEND, dl, VA.getLocVT(), ValToCopy);
    else if (VA.getLocInfo() == CCValAssign::ZExt)
      ValToCopy = DAG.getNode(ISD::ZERO_EXTEND, dl, VA.getLocVT(), ValToCopy);
    else if (VA.getLocInfo() == CCValAssign::AExt) {
      if (ValVT.isVector() && ValVT.getVectorElementType() == MVT::i1)
        ValToCopy = lowerMasksToReg(ValToCopy, VA.getLocVT(), dl, DAG);
      else
        ValToCopy = DAG.getNode(ISD::ANY_EXTEND, dl, VA.getLocVT(), ValToCopy);
    }
    else if (VA.getLocInfo() == CCValAssign::BCvt)
      ValToCopy = DAG.getBitcast(VA.getLocVT(), ValToCopy);

    assert(VA.getLocInfo() != CCValAssign::FPExt &&
           "Unexpected FP-extend for return value.");

    // If this is x86-64, and we disabled SSE, we can't return FP values,
    // or SSE or MMX vectors.
    if ((ValVT == MVT::f32 || ValVT == MVT::f64 ||
         VA.getLocReg() == X86::XMM0 || VA.getLocReg() == X86::XMM1) &&
        (Subtarget.is64Bit() && !Subtarget.hasSSE1())) {
      errorUnsupported(DAG, dl, "SSE register return with SSE disabled");
      VA.convertToReg(X86::FP0); // Set reg to FP0, avoid hitting asserts.
    } else if (ValVT == MVT::f64 &&
               (Subtarget.is64Bit() && !Subtarget.hasSSE2())) {
      // Likewise we can't return F64 values with SSE1 only.  gcc does so, but
      // llvm-gcc has never done it right and no one has noticed, so this
      // should be OK for now.
      errorUnsupported(DAG, dl, "SSE2 register return with SSE2 disabled");
      VA.convertToReg(X86::FP0); // Set reg to FP0, avoid hitting asserts.
    }

    // Returns in ST0/ST1 are handled specially: these are pushed as operands to
    // the RET instruction and handled by the FP Stackifier.
    if (VA.getLocReg() == X86::FP0 ||
        VA.getLocReg() == X86::FP1) {
      // If this is a copy from an xmm register to ST(0), use an FPExtend to
      // change the value to the FP stack register class.
      if (isScalarFPTypeInSSEReg(VA.getValVT()))
        ValToCopy = DAG.getNode(ISD::FP_EXTEND, dl, MVT::f80, ValToCopy);
      RetOps.push_back(ValToCopy);
      // Don't emit a copytoreg.
      continue;
    }

    // 64-bit vector (MMX) values are returned in XMM0 / XMM1 except for v1i64
    // which is returned in RAX / RDX.
    if (Subtarget.is64Bit()) {
      if (ValVT == MVT::x86mmx) {
        if (VA.getLocReg() == X86::XMM0 || VA.getLocReg() == X86::XMM1) {
          ValToCopy = DAG.getBitcast(MVT::i64, ValToCopy);
          ValToCopy = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, MVT::v2i64,
                                  ValToCopy);
          // If we don't have SSE2 available, convert to v4f32 so the generated
          // register is legal.
          if (!Subtarget.hasSSE2())
            ValToCopy = DAG.getBitcast(MVT::v4f32, ValToCopy);
        }
      }
    }

    SmallVector<std::pair<unsigned, SDValue>, 8> RegsToPass;

    if (VA.needsCustom()) {
      assert(VA.getValVT() == MVT::v64i1 &&
             "Currently the only custom case is when we split v64i1 to 2 regs");

      Passv64i1ArgInRegs(dl, DAG, Chain, ValToCopy, RegsToPass, VA, RVLocs[++I],
                         Subtarget);

      assert(2 == RegsToPass.size() &&
             "Expecting two registers after Pass64BitArgInRegs");

      // Add the second register to the CalleeSaveDisableRegs list.
      if (ShouldDisableCalleeSavedRegister)
        MF.getRegInfo().disableCalleeSavedRegister(RVLocs[I].getLocReg());
    } else {
      RegsToPass.push_back(std::make_pair(VA.getLocReg(), ValToCopy));
    }

    // Add nodes to the DAG and add the values into the RetOps list
    for (auto &Reg : RegsToPass) {
      Chain = DAG.getCopyToReg(Chain, dl, Reg.first, Reg.second, Flag);
      Flag = Chain.getValue(1);
      RetOps.push_back(DAG.getRegister(Reg.first, Reg.second.getValueType()));
    }
  }

  // Swift calling convention does not require we copy the sret argument
  // into %rax/%eax for the return, and SRetReturnReg is not set for Swift.

  // All x86 ABIs require that for returning structs by value we copy
  // the sret argument into %rax/%eax (depending on ABI) for the return.
  // We saved the argument into a virtual register in the entry block,
  // so now we copy the value out and into %rax/%eax.
  //
  // Checking Function.hasStructRetAttr() here is insufficient because the IR
  // may not have an explicit sret argument. If FuncInfo.CanLowerReturn is
  // false, then an sret argument may be implicitly inserted in the SelDAG. In
  // either case FuncInfo->setSRetReturnReg() will have been called.
  if (unsigned SRetReg = FuncInfo->getSRetReturnReg()) {
    // When we have both sret and another return value, we should use the
    // original Chain stored in RetOps[0], instead of the current Chain updated
    // in the above loop. If we only have sret, RetOps[0] equals to Chain.

    // For the case of sret and another return value, we have
    //   Chain_0 at the function entry
    //   Chain_1 = getCopyToReg(Chain_0) in the above loop
    // If we use Chain_1 in getCopyFromReg, we will have
    //   Val = getCopyFromReg(Chain_1)
    //   Chain_2 = getCopyToReg(Chain_1, Val) from below

    // getCopyToReg(Chain_0) will be glued together with
    // getCopyToReg(Chain_1, Val) into Unit A, getCopyFromReg(Chain_1) will be
    // in Unit B, and we will have cyclic dependency between Unit A and Unit B:
    //   Data dependency from Unit B to Unit A due to usage of Val in
    //     getCopyToReg(Chain_1, Val)
    //   Chain dependency from Unit A to Unit B

    // So here, we use RetOps[0] (i.e Chain_0) for getCopyFromReg.
    SDValue Val = DAG.getCopyFromReg(RetOps[0], dl, SRetReg,
                                     getPointerTy(MF.getDataLayout()));

    unsigned RetValReg
        = (Subtarget.is64Bit() && !Subtarget.isTarget64BitILP32()) ?
          X86::RAX : X86::EAX;
    Chain = DAG.getCopyToReg(Chain, dl, RetValReg, Val, Flag);
    Flag = Chain.getValue(1);

    // RAX/EAX now acts like a return value.
    RetOps.push_back(
        DAG.getRegister(RetValReg, getPointerTy(DAG.getDataLayout())));

    // Add the returned register to the CalleeSaveDisableRegs list.
    if (ShouldDisableCalleeSavedRegister)
      MF.getRegInfo().disableCalleeSavedRegister(RetValReg);
  }

  const X86RegisterInfo *TRI = Subtarget.getRegisterInfo();
  const MCPhysReg *I =
      TRI->getCalleeSavedRegsViaCopy(&DAG.getMachineFunction());
  if (I) {
    for (; *I; ++I) {
      if (X86::GR64RegClass.contains(*I))
        RetOps.push_back(DAG.getRegister(*I, MVT::i64));
      else
        llvm_unreachable("Unexpected register class in CSRsViaCopy!");
    }
  }

  RetOps[0] = Chain;  // Update chain.

  // Add the flag if we have it.
  if (Flag.getNode())
    RetOps.push_back(Flag);

  X86ISD::NodeType opcode = X86ISD::RET_FLAG;
  if (CallConv == CallingConv::X86_INTR)
    opcode = X86ISD::IRET;
  return DAG.getNode(opcode, dl, MVT::Other, RetOps);
}

bool X86TargetLowering::isUsedByReturnOnly(SDNode *N, SDValue &Chain) const {
  if (N->getNumValues() != 1 || !N->hasNUsesOfValue(1, 0))
    return false;

  SDValue TCChain = Chain;
  SDNode *Copy = *N->use_begin();
  if (Copy->getOpcode() == ISD::CopyToReg) {
    // If the copy has a glue operand, we conservatively assume it isn't safe to
    // perform a tail call.
    if (Copy->getOperand(Copy->getNumOperands()-1).getValueType() == MVT::Glue)
      return false;
    TCChain = Copy->getOperand(0);
  } else if (Copy->getOpcode() != ISD::FP_EXTEND)
    return false;

  bool HasRet = false;
  for (SDNode::use_iterator UI = Copy->use_begin(), UE = Copy->use_end();
       UI != UE; ++UI) {
    if (UI->getOpcode() != X86ISD::RET_FLAG)
      return false;
    // If we are returning more than one value, we can definitely
    // not make a tail call see PR19530
    if (UI->getNumOperands() > 4)
      return false;
    if (UI->getNumOperands() == 4 &&
        UI->getOperand(UI->getNumOperands()-1).getValueType() != MVT::Glue)
      return false;
    HasRet = true;
  }

  if (!HasRet)
    return false;

  Chain = TCChain;
  return true;
}

EVT X86TargetLowering::getTypeForExtReturn(LLVMContext &Context, EVT VT,
                                           ISD::NodeType ExtendKind) const {
  MVT ReturnMVT = MVT::i32;

  bool Darwin = Subtarget.getTargetTriple().isOSDarwin();
  if (VT == MVT::i1 || (!Darwin && (VT == MVT::i8 || VT == MVT::i16))) {
    // The ABI does not require i1, i8 or i16 to be extended.
    //
    // On Darwin, there is code in the wild relying on Clang's old behaviour of
    // always extending i8/i16 return values, so keep doing that for now.
    // (PR26665).
    ReturnMVT = MVT::i8;
  }

  EVT MinVT = getRegisterType(Context, ReturnMVT);
  return VT.bitsLT(MinVT) ? MinVT : VT;
}

/// Reads two 32 bit registers and creates a 64 bit mask value.
/// \param VA The current 32 bit value that need to be assigned.
/// \param NextVA The next 32 bit value that need to be assigned.
/// \param Root The parent DAG node.
/// \param [in,out] InFlag Represents SDvalue in the parent DAG node for
///                        glue purposes. In the case the DAG is already using
///                        physical register instead of virtual, we should glue
///                        our new SDValue to InFlag SDvalue.
/// \return a new SDvalue of size 64bit.
static SDValue getv64i1Argument(CCValAssign &VA, CCValAssign &NextVA,
                                SDValue &Root, SelectionDAG &DAG,
                                const SDLoc &Dl, const X86Subtarget &Subtarget,
                                SDValue *InFlag = nullptr) {
  assert((Subtarget.hasBWI()) && "Expected AVX512BW target!");
  assert(Subtarget.is32Bit() && "Expecting 32 bit target");
  assert(VA.getValVT() == MVT::v64i1 &&
         "Expecting first location of 64 bit width type");
  assert(NextVA.getValVT() == VA.getValVT() &&
         "The locations should have the same type");
  assert(VA.isRegLoc() && NextVA.isRegLoc() &&
         "The values should reside in two registers");

  SDValue Lo, Hi;
  unsigned Reg;
  SDValue ArgValueLo, ArgValueHi;

  MachineFunction &MF = DAG.getMachineFunction();
  const TargetRegisterClass *RC = &X86::GR32RegClass;

  // Read a 32 bit value from the registers
  if (nullptr == InFlag) {
    // When no physical register is present,
    // create an intermediate virtual register
    Reg = MF.addLiveIn(VA.getLocReg(), RC);
    ArgValueLo = DAG.getCopyFromReg(Root, Dl, Reg, MVT::i32);
    Reg = MF.addLiveIn(NextVA.getLocReg(), RC);
    ArgValueHi = DAG.getCopyFromReg(Root, Dl, Reg, MVT::i32);
  } else {
    // When a physical register is available read the value from it and glue
    // the reads together.
    ArgValueLo =
      DAG.getCopyFromReg(Root, Dl, VA.getLocReg(), MVT::i32, *InFlag);
    *InFlag = ArgValueLo.getValue(2);
    ArgValueHi =
      DAG.getCopyFromReg(Root, Dl, NextVA.getLocReg(), MVT::i32, *InFlag);
    *InFlag = ArgValueHi.getValue(2);
  }

  // Convert the i32 type into v32i1 type
  Lo = DAG.getBitcast(MVT::v32i1, ArgValueLo);

  // Convert the i32 type into v32i1 type
  Hi = DAG.getBitcast(MVT::v32i1, ArgValueHi);

  // Concatenate the two values together
  return DAG.getNode(ISD::CONCAT_VECTORS, Dl, MVT::v64i1, Lo, Hi);
}

/// The function will lower a register of various sizes (8/16/32/64)
/// to a mask value of the expected size (v8i1/v16i1/v32i1/v64i1)
/// \returns a DAG node contains the operand after lowering to mask type.
static SDValue lowerRegToMasks(const SDValue &ValArg, const EVT &ValVT,
                               const EVT &ValLoc, const SDLoc &Dl,
                               SelectionDAG &DAG) {
  SDValue ValReturned = ValArg;

  if (ValVT == MVT::v1i1)
    return DAG.getNode(ISD::SCALAR_TO_VECTOR, Dl, MVT::v1i1, ValReturned);

  if (ValVT == MVT::v64i1) {
    // In 32 bit machine, this case is handled by getv64i1Argument
    assert(ValLoc == MVT::i64 && "Expecting only i64 locations");
    // In 64 bit machine, There is no need to truncate the value only bitcast
  } else {
    MVT maskLen;
    switch (ValVT.getSimpleVT().SimpleTy) {
    case MVT::v8i1:
      maskLen = MVT::i8;
      break;
    case MVT::v16i1:
      maskLen = MVT::i16;
      break;
    case MVT::v32i1:
      maskLen = MVT::i32;
      break;
    default:
      llvm_unreachable("Expecting a vector of i1 types");
    }

    ValReturned = DAG.getNode(ISD::TRUNCATE, Dl, maskLen, ValReturned);
  }
  return DAG.getBitcast(ValVT, ValReturned);
}

/// Lower the result values of a call into the
/// appropriate copies out of appropriate physical registers.
///
SDValue X86TargetLowering::LowerCallResult(
    SDValue Chain, SDValue InFlag, CallingConv::ID CallConv, bool isVarArg,
    const SmallVectorImpl<ISD::InputArg> &Ins, const SDLoc &dl,
    SelectionDAG &DAG, SmallVectorImpl<SDValue> &InVals,
    uint32_t *RegMask) const {

  const TargetRegisterInfo *TRI = Subtarget.getRegisterInfo();
  // Assign locations to each value returned by this call.
  SmallVector<CCValAssign, 16> RVLocs;
  bool Is64Bit = Subtarget.is64Bit();
  CCState CCInfo(CallConv, isVarArg, DAG.getMachineFunction(), RVLocs,
                 *DAG.getContext());
  CCInfo.AnalyzeCallResult(Ins, RetCC_X86);

  // Copy all of the result registers out of their specified physreg.
  for (unsigned I = 0, InsIndex = 0, E = RVLocs.size(); I != E;
       ++I, ++InsIndex) {
    CCValAssign &VA = RVLocs[I];
    EVT CopyVT = VA.getLocVT();

    // In some calling conventions we need to remove the used registers
    // from the register mask.
    if (RegMask) {
      for (MCSubRegIterator SubRegs(VA.getLocReg(), TRI, /*IncludeSelf=*/true);
           SubRegs.isValid(); ++SubRegs)
        RegMask[*SubRegs / 32] &= ~(1u << (*SubRegs % 32));
    }

    // If this is x86-64, and we disabled SSE, we can't return FP values
    if ((CopyVT == MVT::f32 || CopyVT == MVT::f64 || CopyVT == MVT::f128) &&
        ((Is64Bit || Ins[InsIndex].Flags.isInReg()) && !Subtarget.hasSSE1())) {
      errorUnsupported(DAG, dl, "SSE register return with SSE disabled");
      VA.convertToReg(X86::FP0); // Set reg to FP0, avoid hitting asserts.
    }

    // If we prefer to use the value in xmm registers, copy it out as f80 and
    // use a truncate to move it from fp stack reg to xmm reg.
    bool RoundAfterCopy = false;
    if ((VA.getLocReg() == X86::FP0 || VA.getLocReg() == X86::FP1) &&
        isScalarFPTypeInSSEReg(VA.getValVT())) {
      if (!Subtarget.hasX87())
        report_fatal_error("X87 register return with X87 disabled");
      CopyVT = MVT::f80;
      RoundAfterCopy = (CopyVT != VA.getLocVT());
    }

    SDValue Val;
    if (VA.needsCustom()) {
      assert(VA.getValVT() == MVT::v64i1 &&
             "Currently the only custom case is when we split v64i1 to 2 regs");
      Val =
          getv64i1Argument(VA, RVLocs[++I], Chain, DAG, dl, Subtarget, &InFlag);
    } else {
      Chain = DAG.getCopyFromReg(Chain, dl, VA.getLocReg(), CopyVT, InFlag)
                  .getValue(1);
      Val = Chain.getValue(0);
      InFlag = Chain.getValue(2);
    }

    if (RoundAfterCopy)
      Val = DAG.getNode(ISD::FP_ROUND, dl, VA.getValVT(), Val,
                        // This truncation won't change the value.
                        DAG.getIntPtrConstant(1, dl));

    if (VA.isExtInLoc() && (VA.getValVT().getScalarType() == MVT::i1)) {
      if (VA.getValVT().isVector() &&
          ((VA.getLocVT() == MVT::i64) || (VA.getLocVT() == MVT::i32) ||
           (VA.getLocVT() == MVT::i16) || (VA.getLocVT() == MVT::i8))) {
        // promoting a mask type (v*i1) into a register of type i64/i32/i16/i8
        Val = lowerRegToMasks(Val, VA.getValVT(), VA.getLocVT(), dl, DAG);
      } else
        Val = DAG.getNode(ISD::TRUNCATE, dl, VA.getValVT(), Val);
    }

    InVals.push_back(Val);
  }

  return Chain;
}

//===----------------------------------------------------------------------===//
//                C & StdCall & Fast Calling Convention implementation
//===----------------------------------------------------------------------===//
//  StdCall calling convention seems to be standard for many Windows' API
//  routines and around. It differs from C calling convention just a little:
//  callee should clean up the stack, not caller. Symbols should be also
//  decorated in some fancy way :) It doesn't support any vector arguments.
//  For info on fast calling convention see Fast Calling Convention (tail call)
//  implementation LowerX86_32FastCCCallTo.

/// CallIsStructReturn - Determines whether a call uses struct return
/// semantics.
enum StructReturnType {
  NotStructReturn,
  RegStructReturn,
  StackStructReturn
};
static StructReturnType
callIsStructReturn(const SmallVectorImpl<ISD::OutputArg> &Outs, bool IsMCU) {
  if (Outs.empty())
    return NotStructReturn;

  const ISD::ArgFlagsTy &Flags = Outs[0].Flags;
  if (!Flags.isSRet())
    return NotStructReturn;
  if (Flags.isInReg() || IsMCU)
    return RegStructReturn;
  return StackStructReturn;
}

/// Determines whether a function uses struct return semantics.
static StructReturnType
argsAreStructReturn(const SmallVectorImpl<ISD::InputArg> &Ins, bool IsMCU) {
  if (Ins.empty())
    return NotStructReturn;

  const ISD::ArgFlagsTy &Flags = Ins[0].Flags;
  if (!Flags.isSRet())
    return NotStructReturn;
  if (Flags.isInReg() || IsMCU)
    return RegStructReturn;
  return StackStructReturn;
}

/// Make a copy of an aggregate at address specified by "Src" to address
/// "Dst" with size and alignment information specified by the specific
/// parameter attribute. The copy will be passed as a byval function parameter.
static SDValue CreateCopyOfByValArgument(SDValue Src, SDValue Dst,
                                         SDValue Chain, ISD::ArgFlagsTy Flags,
                                         SelectionDAG &DAG, const SDLoc &dl) {
  SDValue SizeNode = DAG.getConstant(Flags.getByValSize(), dl, MVT::i32);

  return DAG.getMemcpy(Chain, dl, Dst, Src, SizeNode, Flags.getByValAlign(),
                       /*isVolatile*/false, /*AlwaysInline=*/true,
                       /*isTailCall*/false,
                       MachinePointerInfo(), MachinePointerInfo());
}

/// Return true if the calling convention is one that we can guarantee TCO for.
static bool canGuaranteeTCO(CallingConv::ID CC) {
  return (CC == CallingConv::Fast || CC == CallingConv::GHC ||
          CC == CallingConv::X86_RegCall || CC == CallingConv::HiPE ||
          CC == CallingConv::HHVM);
}

/// Return true if we might ever do TCO for calls with this calling convention.
static bool mayTailCallThisCC(CallingConv::ID CC) {
  switch (CC) {
  // C calling conventions:
  case CallingConv::C:
  case CallingConv::Win64:
  case CallingConv::X86_64_SysV:
  // Callee pop conventions:
  case CallingConv::X86_ThisCall:
  case CallingConv::X86_StdCall:
  case CallingConv::X86_VectorCall:
  case CallingConv::X86_FastCall:
    return true;
  default:
    return canGuaranteeTCO(CC);
  }
}

/// Return true if the function is being made into a tailcall target by
/// changing its ABI.
static bool shouldGuaranteeTCO(CallingConv::ID CC, bool GuaranteedTailCallOpt) {
  return GuaranteedTailCallOpt && canGuaranteeTCO(CC);
}

bool X86TargetLowering::mayBeEmittedAsTailCall(const CallInst *CI) const {
  auto Attr =
      CI->getParent()->getParent()->getFnAttribute("disable-tail-calls");
  if (!CI->isTailCall() || Attr.getValueAsString() == "true")
    return false;

  ImmutableCallSite CS(CI);
  CallingConv::ID CalleeCC = CS.getCallingConv();
  if (!mayTailCallThisCC(CalleeCC))
    return false;

  return true;
}

SDValue
X86TargetLowering::LowerMemArgument(SDValue Chain, CallingConv::ID CallConv,
                                    const SmallVectorImpl<ISD::InputArg> &Ins,
                                    const SDLoc &dl, SelectionDAG &DAG,
                                    const CCValAssign &VA,
                                    MachineFrameInfo &MFI, unsigned i) const {
  // Create the nodes corresponding to a load from this parameter slot.
  ISD::ArgFlagsTy Flags = Ins[i].Flags;
  bool AlwaysUseMutable = shouldGuaranteeTCO(
      CallConv, DAG.getTarget().Options.GuaranteedTailCallOpt);
  bool isImmutable = !AlwaysUseMutable && !Flags.isByVal();
  EVT ValVT;
  MVT PtrVT = getPointerTy(DAG.getDataLayout());

  // If value is passed by pointer we have address passed instead of the value
  // itself. No need to extend if the mask value and location share the same
  // absolute size.
  bool ExtendedInMem =
      VA.isExtInLoc() && VA.getValVT().getScalarType() == MVT::i1 &&
      VA.getValVT().getSizeInBits() != VA.getLocVT().getSizeInBits();

  if (VA.getLocInfo() == CCValAssign::Indirect || ExtendedInMem)
    ValVT = VA.getLocVT();
  else
    ValVT = VA.getValVT();

  // Calculate SP offset of interrupt parameter, re-arrange the slot normally
  // taken by a return address.
  int Offset = 0;
  if (CallConv == CallingConv::X86_INTR) {
    // X86 interrupts may take one or two arguments.
    // On the stack there will be no return address as in regular call.
    // Offset of last argument need to be set to -4/-8 bytes.
    // Where offset of the first argument out of two, should be set to 0 bytes.
    Offset = (Subtarget.is64Bit() ? 8 : 4) * ((i + 1) % Ins.size() - 1);
    if (Subtarget.is64Bit() && Ins.size() == 2) {
      // The stack pointer needs to be realigned for 64 bit handlers with error
      // code, so the argument offset changes by 8 bytes.
      Offset += 8;
    }
  }

  // FIXME: For now, all byval parameter objects are marked mutable. This can be
  // changed with more analysis.
  // In case of tail call optimization mark all arguments mutable. Since they
  // could be overwritten by lowering of arguments in case of a tail call.
  if (Flags.isByVal()) {
    unsigned Bytes = Flags.getByValSize();
    if (Bytes == 0) Bytes = 1; // Don't create zero-sized stack objects.
    int FI = MFI.CreateFixedObject(Bytes, VA.getLocMemOffset(), isImmutable);
    // Adjust SP offset of interrupt parameter.
    if (CallConv == CallingConv::X86_INTR) {
      MFI.setObjectOffset(FI, Offset);
    }
    return DAG.getFrameIndex(FI, PtrVT);
  }

  // This is an argument in memory. We might be able to perform copy elision.
  if (Flags.isCopyElisionCandidate()) {
    EVT ArgVT = Ins[i].ArgVT;
    SDValue PartAddr;
    if (Ins[i].PartOffset == 0) {
      // If this is a one-part value or the first part of a multi-part value,
      // create a stack object for the entire argument value type and return a
      // load from our portion of it. This assumes that if the first part of an
      // argument is in memory, the rest will also be in memory.
      int FI = MFI.CreateFixedObject(ArgVT.getStoreSize(), VA.getLocMemOffset(),
                                     /*Immutable=*/false);
      PartAddr = DAG.getFrameIndex(FI, PtrVT);
      return DAG.getLoad(
          ValVT, dl, Chain, PartAddr,
          MachinePointerInfo::getFixedStack(DAG.getMachineFunction(), FI));
    } else {
      // This is not the first piece of an argument in memory. See if there is
      // already a fixed stack object including this offset. If so, assume it
      // was created by the PartOffset == 0 branch above and create a load from
      // the appropriate offset into it.
      int64_t PartBegin = VA.getLocMemOffset();
      int64_t PartEnd = PartBegin + ValVT.getSizeInBits() / 8;
      int FI = MFI.getObjectIndexBegin();
      for (; MFI.isFixedObjectIndex(FI); ++FI) {
        int64_t ObjBegin = MFI.getObjectOffset(FI);
        int64_t ObjEnd = ObjBegin + MFI.getObjectSize(FI);
        if (ObjBegin <= PartBegin && PartEnd <= ObjEnd)
          break;
      }
      if (MFI.isFixedObjectIndex(FI)) {
        SDValue Addr =
            DAG.getNode(ISD::ADD, dl, PtrVT, DAG.getFrameIndex(FI, PtrVT),
                        DAG.getIntPtrConstant(Ins[i].PartOffset, dl));
        return DAG.getLoad(
            ValVT, dl, Chain, Addr,
            MachinePointerInfo::getFixedStack(DAG.getMachineFunction(), FI,
                                              Ins[i].PartOffset));
      }
    }
  }

  int FI = MFI.CreateFixedObject(ValVT.getSizeInBits() / 8,
                                 VA.getLocMemOffset(), isImmutable);

  // Set SExt or ZExt flag.
  if (VA.getLocInfo() == CCValAssign::ZExt) {
    MFI.setObjectZExt(FI, true);
  } else if (VA.getLocInfo() == CCValAssign::SExt) {
    MFI.setObjectSExt(FI, true);
  }

  // Adjust SP offset of interrupt parameter.
  if (CallConv == CallingConv::X86_INTR) {
    MFI.setObjectOffset(FI, Offset);
  }

  SDValue FIN = DAG.getFrameIndex(FI, PtrVT);
  SDValue Val = DAG.getLoad(
      ValVT, dl, Chain, FIN,
      MachinePointerInfo::getFixedStack(DAG.getMachineFunction(), FI));
  return ExtendedInMem
             ? (VA.getValVT().isVector()
                    ? DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VA.getValVT(), Val)
                    : DAG.getNode(ISD::TRUNCATE, dl, VA.getValVT(), Val))
             : Val;
}

// FIXME: Get this from tablegen.
static ArrayRef<MCPhysReg> get64BitArgumentGPRs(CallingConv::ID CallConv,
                                                const X86Subtarget &Subtarget) {
  assert(Subtarget.is64Bit());

  if (Subtarget.isCallingConvWin64(CallConv)) {
    static const MCPhysReg GPR64ArgRegsWin64[] = {
      X86::RCX, X86::RDX, X86::R8,  X86::R9
    };
    return makeArrayRef(std::begin(GPR64ArgRegsWin64), std::end(GPR64ArgRegsWin64));
  }

  static const MCPhysReg GPR64ArgRegs64Bit[] = {
    X86::RDI, X86::RSI, X86::RDX, X86::RCX, X86::R8, X86::R9
  };
  return makeArrayRef(std::begin(GPR64ArgRegs64Bit), std::end(GPR64ArgRegs64Bit));
}

// FIXME: Get this from tablegen.
static ArrayRef<MCPhysReg> get64BitArgumentXMMs(MachineFunction &MF,
                                                CallingConv::ID CallConv,
                                                const X86Subtarget &Subtarget) {
  assert(Subtarget.is64Bit());
  if (Subtarget.isCallingConvWin64(CallConv)) {
    // The XMM registers which might contain var arg parameters are shadowed
    // in their paired GPR.  So we only need to save the GPR to their home
    // slots.
    // TODO: __vectorcall will change this.
    return None;
  }

  const Function *Fn = MF.getFunction();
  bool NoImplicitFloatOps = Fn->hasFnAttribute(Attribute::NoImplicitFloat);
  bool isSoftFloat = Subtarget.useSoftFloat();
  assert(!(isSoftFloat && NoImplicitFloatOps) &&
         "SSE register cannot be used when SSE is disabled!");
  if (isSoftFloat || NoImplicitFloatOps || !Subtarget.hasSSE1())
    // Kernel mode asks for SSE to be disabled, so there are no XMM argument
    // registers.
    return None;

  static const MCPhysReg XMMArgRegs64Bit[] = {
    X86::XMM0, X86::XMM1, X86::XMM2, X86::XMM3,
    X86::XMM4, X86::XMM5, X86::XMM6, X86::XMM7
  };
  return makeArrayRef(std::begin(XMMArgRegs64Bit), std::end(XMMArgRegs64Bit));
}

#ifndef NDEBUG
static bool isSortedByValueNo(const SmallVectorImpl<CCValAssign> &ArgLocs) {
  return std::is_sorted(ArgLocs.begin(), ArgLocs.end(),
                        [](const CCValAssign &A, const CCValAssign &B) -> bool {
                          return A.getValNo() < B.getValNo();
                        });
}
#endif

SDValue X86TargetLowering::LowerFormalArguments(
    SDValue Chain, CallingConv::ID CallConv, bool isVarArg,
    const SmallVectorImpl<ISD::InputArg> &Ins, const SDLoc &dl,
    SelectionDAG &DAG, SmallVectorImpl<SDValue> &InVals) const {
  MachineFunction &MF = DAG.getMachineFunction();
  X86MachineFunctionInfo *FuncInfo = MF.getInfo<X86MachineFunctionInfo>();
  const TargetFrameLowering &TFI = *Subtarget.getFrameLowering();

  const Function *Fn = MF.getFunction();
  if (Fn->hasExternalLinkage() &&
      Subtarget.isTargetCygMing() &&
      Fn->getName() == "main")
    FuncInfo->setForceFramePointer(true);

  MachineFrameInfo &MFI = MF.getFrameInfo();
  bool Is64Bit = Subtarget.is64Bit();
  bool IsWin64 = Subtarget.isCallingConvWin64(CallConv);

  assert(
      !(isVarArg && canGuaranteeTCO(CallConv)) &&
      "Var args not supported with calling conv' regcall, fastcc, ghc or hipe");

  if (CallConv == CallingConv::X86_INTR) {
    bool isLegal = Ins.size() == 1 ||
                   (Ins.size() == 2 && ((Is64Bit && Ins[1].VT == MVT::i64) ||
                                        (!Is64Bit && Ins[1].VT == MVT::i32)));
    if (!isLegal)
      report_fatal_error("X86 interrupts may take one or two arguments");
  }

  // Assign locations to all of the incoming arguments.
  SmallVector<CCValAssign, 16> ArgLocs;
  CCState CCInfo(CallConv, isVarArg, MF, ArgLocs, *DAG.getContext());

  // Allocate shadow area for Win64.
  if (IsWin64)
    CCInfo.AllocateStack(32, 8);

  CCInfo.AnalyzeArguments(Ins, CC_X86);

  // In vectorcall calling convention a second pass is required for the HVA
  // types.
  if (CallingConv::X86_VectorCall == CallConv) {
    CCInfo.AnalyzeArgumentsSecondPass(Ins, CC_X86);
  }

  // The next loop assumes that the locations are in the same order of the
  // input arguments.
  assert(isSortedByValueNo(ArgLocs) &&
         "Argument Location list must be sorted before lowering");

  SDValue ArgValue;
  for (unsigned I = 0, InsIndex = 0, E = ArgLocs.size(); I != E;
       ++I, ++InsIndex) {
    assert(InsIndex < Ins.size() && "Invalid Ins index");
    CCValAssign &VA = ArgLocs[I];

    if (VA.isRegLoc()) {
      EVT RegVT = VA.getLocVT();
      if (VA.needsCustom()) {
        assert(
            VA.getValVT() == MVT::v64i1 &&
            "Currently the only custom case is when we split v64i1 to 2 regs");

        // v64i1 values, in regcall calling convention, that are
        // compiled to 32 bit arch, are split up into two registers.
        ArgValue =
            getv64i1Argument(VA, ArgLocs[++I], Chain, DAG, dl, Subtarget);
      } else {
        const TargetRegisterClass *RC;
        if (RegVT == MVT::i32)
          RC = &X86::GR32RegClass;
        else if (Is64Bit && RegVT == MVT::i64)
          RC = &X86::GR64RegClass;
        else if (RegVT == MVT::f32)
          RC = Subtarget.hasAVX512() ? &X86::FR32XRegClass : &X86::FR32RegClass;
        else if (RegVT == MVT::f64)
          RC = Subtarget.hasAVX512() ? &X86::FR64XRegClass : &X86::FR64RegClass;
        else if (RegVT == MVT::f80)
          RC = &X86::RFP80RegClass;
        else if (RegVT == MVT::f128)
          RC = &X86::FR128RegClass;
        else if (RegVT.is512BitVector())
          RC = &X86::VR512RegClass;
        else if (RegVT.is256BitVector())
          RC = Subtarget.hasVLX() ? &X86::VR256XRegClass : &X86::VR256RegClass;
        else if (RegVT.is128BitVector())
          RC = Subtarget.hasVLX() ? &X86::VR128XRegClass : &X86::VR128RegClass;
        else if (RegVT == MVT::x86mmx)
          RC = &X86::VR64RegClass;
        else if (RegVT == MVT::v1i1)
          RC = &X86::VK1RegClass;
        else if (RegVT == MVT::v8i1)
          RC = &X86::VK8RegClass;
        else if (RegVT == MVT::v16i1)
          RC = &X86::VK16RegClass;
        else if (RegVT == MVT::v32i1)
          RC = &X86::VK32RegClass;
        else if (RegVT == MVT::v64i1)
          RC = &X86::VK64RegClass;
        else
          llvm_unreachable("Unknown argument type!");

        unsigned Reg = MF.addLiveIn(VA.getLocReg(), RC);
        ArgValue = DAG.getCopyFromReg(Chain, dl, Reg, RegVT);
      }

      // If this is an 8 or 16-bit value, it is really passed promoted to 32
      // bits.  Insert an assert[sz]ext to capture this, then truncate to the
      // right size.
      if (VA.getLocInfo() == CCValAssign::SExt)
        ArgValue = DAG.getNode(ISD::AssertSext, dl, RegVT, ArgValue,
                               DAG.getValueType(VA.getValVT()));
      else if (VA.getLocInfo() == CCValAssign::ZExt)
        ArgValue = DAG.getNode(ISD::AssertZext, dl, RegVT, ArgValue,
                               DAG.getValueType(VA.getValVT()));
      else if (VA.getLocInfo() == CCValAssign::BCvt)
        ArgValue = DAG.getBitcast(VA.getValVT(), ArgValue);

      if (VA.isExtInLoc()) {
        // Handle MMX values passed in XMM regs.
        if (RegVT.isVector() && VA.getValVT().getScalarType() != MVT::i1)
          ArgValue = DAG.getNode(X86ISD::MOVDQ2Q, dl, VA.getValVT(), ArgValue);
        else if (VA.getValVT().isVector() &&
                 VA.getValVT().getScalarType() == MVT::i1 &&
                 ((VA.getLocVT() == MVT::i64) || (VA.getLocVT() == MVT::i32) ||
                  (VA.getLocVT() == MVT::i16) || (VA.getLocVT() == MVT::i8))) {
          // Promoting a mask type (v*i1) into a register of type i64/i32/i16/i8
          ArgValue = lowerRegToMasks(ArgValue, VA.getValVT(), RegVT, dl, DAG);
        } else
          ArgValue = DAG.getNode(ISD::TRUNCATE, dl, VA.getValVT(), ArgValue);
      }
    } else {
      assert(VA.isMemLoc());
      ArgValue =
          LowerMemArgument(Chain, CallConv, Ins, dl, DAG, VA, MFI, InsIndex);
    }

    // If value is passed via pointer - do a load.
    if (VA.getLocInfo() == CCValAssign::Indirect)
      ArgValue =
          DAG.getLoad(VA.getValVT(), dl, Chain, ArgValue, MachinePointerInfo());

    InVals.push_back(ArgValue);
  }

  for (unsigned I = 0, E = Ins.size(); I != E; ++I) {
    // Swift calling convention does not require we copy the sret argument
    // into %rax/%eax for the return. We don't set SRetReturnReg for Swift.
    if (CallConv == CallingConv::Swift)
      continue;

    // All x86 ABIs require that for returning structs by value we copy the
    // sret argument into %rax/%eax (depending on ABI) for the return. Save
    // the argument into a virtual register so that we can access it from the
    // return points.
    if (Ins[I].Flags.isSRet()) {
      unsigned Reg = FuncInfo->getSRetReturnReg();
      if (!Reg) {
        MVT PtrTy = getPointerTy(DAG.getDataLayout());
        Reg = MF.getRegInfo().createVirtualRegister(getRegClassFor(PtrTy));
        FuncInfo->setSRetReturnReg(Reg);
      }
      SDValue Copy = DAG.getCopyToReg(DAG.getEntryNode(), dl, Reg, InVals[I]);
      Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, Copy, Chain);
      break;
    }
  }

  unsigned StackSize = CCInfo.getNextStackOffset();
  // Align stack specially for tail calls.
  if (shouldGuaranteeTCO(CallConv,
                         MF.getTarget().Options.GuaranteedTailCallOpt))
    StackSize = GetAlignedArgumentStackSize(StackSize, DAG);

  // If the function takes variable number of arguments, make a frame index for
  // the start of the first vararg value... for expansion of llvm.va_start. We
  // can skip this if there are no va_start calls.
  if (MFI.hasVAStart() &&
      (Is64Bit || (CallConv != CallingConv::X86_FastCall &&
                   CallConv != CallingConv::X86_ThisCall))) {
    FuncInfo->setVarArgsFrameIndex(MFI.CreateFixedObject(1, StackSize, true));
  }

  // Figure out if XMM registers are in use.
  assert(!(Subtarget.useSoftFloat() &&
           Fn->hasFnAttribute(Attribute::NoImplicitFloat)) &&
         "SSE register cannot be used when SSE is disabled!");

  // 64-bit calling conventions support varargs and register parameters, so we
  // have to do extra work to spill them in the prologue.
  if (Is64Bit && isVarArg && MFI.hasVAStart()) {
    // Find the first unallocated argument registers.
    ArrayRef<MCPhysReg> ArgGPRs = get64BitArgumentGPRs(CallConv, Subtarget);
    ArrayRef<MCPhysReg> ArgXMMs = get64BitArgumentXMMs(MF, CallConv, Subtarget);
    unsigned NumIntRegs = CCInfo.getFirstUnallocated(ArgGPRs);
    unsigned NumXMMRegs = CCInfo.getFirstUnallocated(ArgXMMs);
    assert(!(NumXMMRegs && !Subtarget.hasSSE1()) &&
           "SSE register cannot be used when SSE is disabled!");

    // Gather all the live in physical registers.
    SmallVector<SDValue, 6> LiveGPRs;
    SmallVector<SDValue, 8> LiveXMMRegs;
    SDValue ALVal;
    for (MCPhysReg Reg : ArgGPRs.slice(NumIntRegs)) {
      unsigned GPR = MF.addLiveIn(Reg, &X86::GR64RegClass);
      LiveGPRs.push_back(
          DAG.getCopyFromReg(Chain, dl, GPR, MVT::i64));
    }
    if (!ArgXMMs.empty()) {
      unsigned AL = MF.addLiveIn(X86::AL, &X86::GR8RegClass);
      ALVal = DAG.getCopyFromReg(Chain, dl, AL, MVT::i8);
      for (MCPhysReg Reg : ArgXMMs.slice(NumXMMRegs)) {
        unsigned XMMReg = MF.addLiveIn(Reg, &X86::VR128RegClass);
        LiveXMMRegs.push_back(
            DAG.getCopyFromReg(Chain, dl, XMMReg, MVT::v4f32));
      }
    }

    if (IsWin64) {
      // Get to the caller-allocated home save location.  Add 8 to account
      // for the return address.
      int HomeOffset = TFI.getOffsetOfLocalArea() + 8;
      FuncInfo->setRegSaveFrameIndex(
          MFI.CreateFixedObject(1, NumIntRegs * 8 + HomeOffset, false));
      // Fixup to set vararg frame on shadow area (4 x i64).
      if (NumIntRegs < 4)
        FuncInfo->setVarArgsFrameIndex(FuncInfo->getRegSaveFrameIndex());
    } else {
      // For X86-64, if there are vararg parameters that are passed via
      // registers, then we must store them to their spots on the stack so
      // they may be loaded by dereferencing the result of va_next.
      FuncInfo->setVarArgsGPOffset(NumIntRegs * 8);
      FuncInfo->setVarArgsFPOffset(ArgGPRs.size() * 8 + NumXMMRegs * 16);
      FuncInfo->setRegSaveFrameIndex(MFI.CreateStackObject(
          ArgGPRs.size() * 8 + ArgXMMs.size() * 16, 16, false));
    }

    // Store the integer parameter registers.
    SmallVector<SDValue, 8> MemOps;
    SDValue RSFIN = DAG.getFrameIndex(FuncInfo->getRegSaveFrameIndex(),
                                      getPointerTy(DAG.getDataLayout()));
    unsigned Offset = FuncInfo->getVarArgsGPOffset();
    for (SDValue Val : LiveGPRs) {
      SDValue FIN = DAG.getNode(ISD::ADD, dl, getPointerTy(DAG.getDataLayout()),
                                RSFIN, DAG.getIntPtrConstant(Offset, dl));
      SDValue Store =
          DAG.getStore(Val.getValue(1), dl, Val, FIN,
                       MachinePointerInfo::getFixedStack(
                           DAG.getMachineFunction(),
                           FuncInfo->getRegSaveFrameIndex(), Offset));
      MemOps.push_back(Store);
      Offset += 8;
    }

    if (!ArgXMMs.empty() && NumXMMRegs != ArgXMMs.size()) {
      // Now store the XMM (fp + vector) parameter registers.
      SmallVector<SDValue, 12> SaveXMMOps;
      SaveXMMOps.push_back(Chain);
      SaveXMMOps.push_back(ALVal);
      SaveXMMOps.push_back(DAG.getIntPtrConstant(
                             FuncInfo->getRegSaveFrameIndex(), dl));
      SaveXMMOps.push_back(DAG.getIntPtrConstant(
                             FuncInfo->getVarArgsFPOffset(), dl));
      SaveXMMOps.insert(SaveXMMOps.end(), LiveXMMRegs.begin(),
                        LiveXMMRegs.end());
      MemOps.push_back(DAG.getNode(X86ISD::VASTART_SAVE_XMM_REGS, dl,
                                   MVT::Other, SaveXMMOps));
    }

    if (!MemOps.empty())
      Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, MemOps);
  }

  if (isVarArg && MFI.hasMustTailInVarArgFunc()) {
    // Find the largest legal vector type.
    MVT VecVT = MVT::Other;
    // FIXME: Only some x86_32 calling conventions support AVX512.
    if (Subtarget.hasAVX512() &&
        (Is64Bit || (CallConv == CallingConv::X86_VectorCall ||
                     CallConv == CallingConv::Intel_OCL_BI)))
      VecVT = MVT::v16f32;
    else if (Subtarget.hasAVX())
      VecVT = MVT::v8f32;
    else if (Subtarget.hasSSE2())
      VecVT = MVT::v4f32;

    // We forward some GPRs and some vector types.
    SmallVector<MVT, 2> RegParmTypes;
    MVT IntVT = Is64Bit ? MVT::i64 : MVT::i32;
    RegParmTypes.push_back(IntVT);
    if (VecVT != MVT::Other)
      RegParmTypes.push_back(VecVT);

    // Compute the set of forwarded registers. The rest are scratch.
    SmallVectorImpl<ForwardedRegister> &Forwards =
        FuncInfo->getForwardedMustTailRegParms();
    CCInfo.analyzeMustTailForwardedRegisters(Forwards, RegParmTypes, CC_X86);

    // Conservatively forward AL on x86_64, since it might be used for varargs.
    if (Is64Bit && !CCInfo.isAllocated(X86::AL)) {
      unsigned ALVReg = MF.addLiveIn(X86::AL, &X86::GR8RegClass);
      Forwards.push_back(ForwardedRegister(ALVReg, X86::AL, MVT::i8));
    }

    // Copy all forwards from physical to virtual registers.
    for (ForwardedRegister &F : Forwards) {
      // FIXME: Can we use a less constrained schedule?
      SDValue RegVal = DAG.getCopyFromReg(Chain, dl, F.VReg, F.VT);
      F.VReg = MF.getRegInfo().createVirtualRegister(getRegClassFor(F.VT));
      Chain = DAG.getCopyToReg(Chain, dl, F.VReg, RegVal);
    }
  }

  // Some CCs need callee pop.
  if (X86::isCalleePop(CallConv, Is64Bit, isVarArg,
                       MF.getTarget().Options.GuaranteedTailCallOpt)) {
    FuncInfo->setBytesToPopOnReturn(StackSize); // Callee pops everything.
  } else if (CallConv == CallingConv::X86_INTR && Ins.size() == 2) {
    // X86 interrupts must pop the error code (and the alignment padding) if
    // present.
    FuncInfo->setBytesToPopOnReturn(Is64Bit ? 16 : 4);
  } else {
    FuncInfo->setBytesToPopOnReturn(0); // Callee pops nothing.
    // If this is an sret function, the return should pop the hidden pointer.
    if (!Is64Bit && !canGuaranteeTCO(CallConv) &&
        !Subtarget.getTargetTriple().isOSMSVCRT() &&
        argsAreStructReturn(Ins, Subtarget.isTargetMCU()) == StackStructReturn)
      FuncInfo->setBytesToPopOnReturn(4);
  }

  if (!Is64Bit) {
    // RegSaveFrameIndex is X86-64 only.
    FuncInfo->setRegSaveFrameIndex(0xAAAAAAA);
    if (CallConv == CallingConv::X86_FastCall ||
        CallConv == CallingConv::X86_ThisCall)
      // fastcc functions can't have varargs.
      FuncInfo->setVarArgsFrameIndex(0xAAAAAAA);
  }

  FuncInfo->setArgumentStackSize(StackSize);

  if (WinEHFuncInfo *EHInfo = MF.getWinEHFuncInfo()) {
    EHPersonality Personality = classifyEHPersonality(Fn->getPersonalityFn());
    if (Personality == EHPersonality::CoreCLR) {
      assert(Is64Bit);
      // TODO: Add a mechanism to frame lowering that will allow us to indicate
      // that we'd prefer this slot be allocated towards the bottom of the frame
      // (i.e. near the stack pointer after allocating the frame).  Every
      // funclet needs a copy of this slot in its (mostly empty) frame, and the
      // offset from the bottom of this and each funclet's frame must be the
      // same, so the size of funclets' (mostly empty) frames is dictated by
      // how far this slot is from the bottom (since they allocate just enough
      // space to accommodate holding this slot at the correct offset).
      int PSPSymFI = MFI.CreateStackObject(8, 8, /*isSS=*/false);
      EHInfo->PSPSymFrameIdx = PSPSymFI;
    }
  }

  if (CallConv == CallingConv::X86_RegCall ||
      Fn->hasFnAttribute("no_caller_saved_registers")) {
    MachineRegisterInfo &MRI = MF.getRegInfo();
    for (std::pair<unsigned, unsigned> Pair : MRI.liveins())
      MRI.disableCalleeSavedRegister(Pair.first);
  }

  return Chain;
}

SDValue X86TargetLowering::LowerMemOpCallTo(SDValue Chain, SDValue StackPtr,
                                            SDValue Arg, const SDLoc &dl,
                                            SelectionDAG &DAG,
                                            const CCValAssign &VA,
                                            ISD::ArgFlagsTy Flags) const {
  unsigned LocMemOffset = VA.getLocMemOffset();
  SDValue PtrOff = DAG.getIntPtrConstant(LocMemOffset, dl);
  PtrOff = DAG.getNode(ISD::ADD, dl, getPointerTy(DAG.getDataLayout()),
                       StackPtr, PtrOff);
  if (Flags.isByVal())
    return CreateCopyOfByValArgument(Arg, PtrOff, Chain, Flags, DAG, dl);

  return DAG.getStore(
      Chain, dl, Arg, PtrOff,
      MachinePointerInfo::getStack(DAG.getMachineFunction(), LocMemOffset));
}

/// Emit a load of return address if tail call
/// optimization is performed and it is required.
SDValue X86TargetLowering::EmitTailCallLoadRetAddr(
    SelectionDAG &DAG, SDValue &OutRetAddr, SDValue Chain, bool IsTailCall,
    bool Is64Bit, int FPDiff, const SDLoc &dl) const {
  // Adjust the Return address stack slot.
  EVT VT = getPointerTy(DAG.getDataLayout());
  OutRetAddr = getReturnAddressFrameIndex(DAG);

  // Load the "old" Return address.
  OutRetAddr = DAG.getLoad(VT, dl, Chain, OutRetAddr, MachinePointerInfo());
  return SDValue(OutRetAddr.getNode(), 1);
}

/// Emit a store of the return address if tail call
/// optimization is performed and it is required (FPDiff!=0).
static SDValue EmitTailCallStoreRetAddr(SelectionDAG &DAG, MachineFunction &MF,
                                        SDValue Chain, SDValue RetAddrFrIdx,
                                        EVT PtrVT, unsigned SlotSize,
                                        int FPDiff, const SDLoc &dl) {
  // Store the return address to the appropriate stack slot.
  if (!FPDiff) return Chain;
  // Calculate the new stack slot for the return address.
  int NewReturnAddrFI =
    MF.getFrameInfo().CreateFixedObject(SlotSize, (int64_t)FPDiff - SlotSize,
                                         false);
  SDValue NewRetAddrFrIdx = DAG.getFrameIndex(NewReturnAddrFI, PtrVT);
  Chain = DAG.getStore(Chain, dl, RetAddrFrIdx, NewRetAddrFrIdx,
                       MachinePointerInfo::getFixedStack(
                           DAG.getMachineFunction(), NewReturnAddrFI));
  return Chain;
}

/// Returns a vector_shuffle mask for an movs{s|d}, movd
/// operation of specified width.
static SDValue getMOVL(SelectionDAG &DAG, const SDLoc &dl, MVT VT, SDValue V1,
                       SDValue V2) {
  unsigned NumElems = VT.getVectorNumElements();
  SmallVector<int, 8> Mask;
  Mask.push_back(NumElems);
  for (unsigned i = 1; i != NumElems; ++i)
    Mask.push_back(i);
  return DAG.getVectorShuffle(VT, dl, V1, V2, Mask);
}

SDValue
X86TargetLowering::LowerCall(TargetLowering::CallLoweringInfo &CLI,
                             SmallVectorImpl<SDValue> &InVals) const {
  SelectionDAG &DAG                     = CLI.DAG;
  SDLoc &dl                             = CLI.DL;
  SmallVectorImpl<ISD::OutputArg> &Outs = CLI.Outs;
  SmallVectorImpl<SDValue> &OutVals     = CLI.OutVals;
  SmallVectorImpl<ISD::InputArg> &Ins   = CLI.Ins;
  SDValue Chain                         = CLI.Chain;
  SDValue Callee                        = CLI.Callee;
  CallingConv::ID CallConv              = CLI.CallConv;
  bool &isTailCall                      = CLI.IsTailCall;
  bool isVarArg                         = CLI.IsVarArg;

  MachineFunction &MF = DAG.getMachineFunction();
  bool Is64Bit        = Subtarget.is64Bit();
  bool IsWin64        = Subtarget.isCallingConvWin64(CallConv);
  StructReturnType SR = callIsStructReturn(Outs, Subtarget.isTargetMCU());
  bool IsSibcall      = false;
  X86MachineFunctionInfo *X86Info = MF.getInfo<X86MachineFunctionInfo>();
  auto Attr = MF.getFunction()->getFnAttribute("disable-tail-calls");
  const auto *CI = dyn_cast_or_null<CallInst>(CLI.CS.getInstruction());
  const Function *Fn = CI ? CI->getCalledFunction() : nullptr;
  bool HasNCSR = (CI && CI->hasFnAttr("no_caller_saved_registers")) ||
                 (Fn && Fn->hasFnAttribute("no_caller_saved_registers"));

  if (CallConv == CallingConv::X86_INTR)
    report_fatal_error("X86 interrupts may not be called directly");

  if (Attr.getValueAsString() == "true")
    isTailCall = false;

  if (Subtarget.isPICStyleGOT() &&
      !MF.getTarget().Options.GuaranteedTailCallOpt) {
    // If we are using a GOT, disable tail calls to external symbols with
    // default visibility. Tail calling such a symbol requires using a GOT
    // relocation, which forces early binding of the symbol. This breaks code
    // that require lazy function symbol resolution. Using musttail or
    // GuaranteedTailCallOpt will override this.
    GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(Callee);
    if (!G || (!G->getGlobal()->hasLocalLinkage() &&
               G->getGlobal()->hasDefaultVisibility()))
      isTailCall = false;
  }

  bool IsMustTail = CLI.CS && CLI.CS.isMustTailCall();
  if (IsMustTail) {
    // Force this to be a tail call.  The verifier rules are enough to ensure
    // that we can lower this successfully without moving the return address
    // around.
    isTailCall = true;
  } else if (isTailCall) {
    // Check if it's really possible to do a tail call.
    isTailCall = IsEligibleForTailCallOptimization(Callee, CallConv,
                    isVarArg, SR != NotStructReturn,
                    MF.getFunction()->hasStructRetAttr(), CLI.RetTy,
                    Outs, OutVals, Ins, DAG);

    // Sibcalls are automatically detected tailcalls which do not require
    // ABI changes.
    if (!MF.getTarget().Options.GuaranteedTailCallOpt && isTailCall)
      IsSibcall = true;

    if (isTailCall)
      ++NumTailCalls;
  }

  assert(!(isVarArg && canGuaranteeTCO(CallConv)) &&
         "Var args not supported with calling convention fastcc, ghc or hipe");

  // Analyze operands of the call, assigning locations to each operand.
  SmallVector<CCValAssign, 16> ArgLocs;
  CCState CCInfo(CallConv, isVarArg, MF, ArgLocs, *DAG.getContext());

  // Allocate shadow area for Win64.
  if (IsWin64)
    CCInfo.AllocateStack(32, 8);

  CCInfo.AnalyzeArguments(Outs, CC_X86);

  // In vectorcall calling convention a second pass is required for the HVA
  // types.
  if (CallingConv::X86_VectorCall == CallConv) {
    CCInfo.AnalyzeArgumentsSecondPass(Outs, CC_X86);
  }

  // Get a count of how many bytes are to be pushed on the stack.
  unsigned NumBytes = CCInfo.getAlignedCallFrameSize();
  if (IsSibcall)
    // This is a sibcall. The memory operands are available in caller's
    // own caller's stack.
    NumBytes = 0;
  else if (MF.getTarget().Options.GuaranteedTailCallOpt &&
           canGuaranteeTCO(CallConv))
    NumBytes = GetAlignedArgumentStackSize(NumBytes, DAG);

  int FPDiff = 0;
  if (isTailCall && !IsSibcall && !IsMustTail) {
    // Lower arguments at fp - stackoffset + fpdiff.
    unsigned NumBytesCallerPushed = X86Info->getBytesToPopOnReturn();

    FPDiff = NumBytesCallerPushed - NumBytes;

    // Set the delta of movement of the returnaddr stackslot.
    // But only set if delta is greater than previous delta.
    if (FPDiff < X86Info->getTCReturnAddrDelta())
      X86Info->setTCReturnAddrDelta(FPDiff);
  }

  unsigned NumBytesToPush = NumBytes;
  unsigned NumBytesToPop = NumBytes;

  // If we have an inalloca argument, all stack space has already been allocated
  // for us and be right at the top of the stack.  We don't support multiple
  // arguments passed in memory when using inalloca.
  if (!Outs.empty() && Outs.back().Flags.isInAlloca()) {
    NumBytesToPush = 0;
    if (!ArgLocs.back().isMemLoc())
      report_fatal_error("cannot use inalloca attribute on a register "
                         "parameter");
    if (ArgLocs.back().getLocMemOffset() != 0)
      report_fatal_error("any parameter with the inalloca attribute must be "
                         "the only memory argument");
  }

  if (!IsSibcall)
    Chain = DAG.getCALLSEQ_START(Chain, NumBytesToPush,
                                 NumBytes - NumBytesToPush, dl);

  SDValue RetAddrFrIdx;
  // Load return address for tail calls.
  if (isTailCall && FPDiff)
    Chain = EmitTailCallLoadRetAddr(DAG, RetAddrFrIdx, Chain, isTailCall,
                                    Is64Bit, FPDiff, dl);

  SmallVector<std::pair<unsigned, SDValue>, 8> RegsToPass;
  SmallVector<SDValue, 8> MemOpChains;
  SDValue StackPtr;

  // The next loop assumes that the locations are in the same order of the
  // input arguments.
  assert(isSortedByValueNo(ArgLocs) &&
         "Argument Location list must be sorted before lowering");

  // Walk the register/memloc assignments, inserting copies/loads.  In the case
  // of tail call optimization arguments are handle later.
  const X86RegisterInfo *RegInfo = Subtarget.getRegisterInfo();
  for (unsigned I = 0, OutIndex = 0, E = ArgLocs.size(); I != E;
       ++I, ++OutIndex) {
    assert(OutIndex < Outs.size() && "Invalid Out index");
    // Skip inalloca arguments, they have already been written.
    ISD::ArgFlagsTy Flags = Outs[OutIndex].Flags;
    if (Flags.isInAlloca())
      continue;

    CCValAssign &VA = ArgLocs[I];
    EVT RegVT = VA.getLocVT();
    SDValue Arg = OutVals[OutIndex];
    bool isByVal = Flags.isByVal();

    // Promote the value if needed.
    switch (VA.getLocInfo()) {
    default: llvm_unreachable("Unknown loc info!");
    case CCValAssign::Full: break;
    case CCValAssign::SExt:
      Arg = DAG.getNode(ISD::SIGN_EXTEND, dl, RegVT, Arg);
      break;
    case CCValAssign::ZExt:
      Arg = DAG.getNode(ISD::ZERO_EXTEND, dl, RegVT, Arg);
      break;
    case CCValAssign::AExt:
      if (Arg.getValueType().isVector() &&
          Arg.getValueType().getVectorElementType() == MVT::i1)
        Arg = lowerMasksToReg(Arg, RegVT, dl, DAG);
      else if (RegVT.is128BitVector()) {
        // Special case: passing MMX values in XMM registers.
        Arg = DAG.getBitcast(MVT::i64, Arg);
        Arg = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, MVT::v2i64, Arg);
        Arg = getMOVL(DAG, dl, MVT::v2i64, DAG.getUNDEF(MVT::v2i64), Arg);
      } else
        Arg = DAG.getNode(ISD::ANY_EXTEND, dl, RegVT, Arg);
      break;
    case CCValAssign::BCvt:
      Arg = DAG.getBitcast(RegVT, Arg);
      break;
    case CCValAssign::Indirect: {
      // Store the argument.
      SDValue SpillSlot = DAG.CreateStackTemporary(VA.getValVT());
      int FI = cast<FrameIndexSDNode>(SpillSlot)->getIndex();
      Chain = DAG.getStore(
          Chain, dl, Arg, SpillSlot,
          MachinePointerInfo::getFixedStack(DAG.getMachineFunction(), FI));
      Arg = SpillSlot;
      break;
    }
    }

    if (VA.needsCustom()) {
      assert(VA.getValVT() == MVT::v64i1 &&
             "Currently the only custom case is when we split v64i1 to 2 regs");
      // Split v64i1 value into two registers
      Passv64i1ArgInRegs(dl, DAG, Chain, Arg, RegsToPass, VA, ArgLocs[++I],
                         Subtarget);
    } else if (VA.isRegLoc()) {
      RegsToPass.push_back(std::make_pair(VA.getLocReg(), Arg));
      if (isVarArg && IsWin64) {
        // Win64 ABI requires argument XMM reg to be copied to the corresponding
        // shadow reg if callee is a varargs function.
        unsigned ShadowReg = 0;
        switch (VA.getLocReg()) {
        case X86::XMM0: ShadowReg = X86::RCX; break;
        case X86::XMM1: ShadowReg = X86::RDX; break;
        case X86::XMM2: ShadowReg = X86::R8; break;
        case X86::XMM3: ShadowReg = X86::R9; break;
        }
        if (ShadowReg)
          RegsToPass.push_back(std::make_pair(ShadowReg, Arg));
      }
    } else if (!IsSibcall && (!isTailCall || isByVal)) {
      assert(VA.isMemLoc());
      if (!StackPtr.getNode())
        StackPtr = DAG.getCopyFromReg(Chain, dl, RegInfo->getStackRegister(),
                                      getPointerTy(DAG.getDataLayout()));
      MemOpChains.push_back(LowerMemOpCallTo(Chain, StackPtr, Arg,
                                             dl, DAG, VA, Flags));
    }
  }

  if (!MemOpChains.empty())
    Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, MemOpChains);

  if (Subtarget.isPICStyleGOT()) {
    // ELF / PIC requires GOT in the EBX register before function calls via PLT
    // GOT pointer.
    if (!isTailCall) {
      RegsToPass.push_back(std::make_pair(
          unsigned(X86::EBX), DAG.getNode(X86ISD::GlobalBaseReg, SDLoc(),
                                          getPointerTy(DAG.getDataLayout()))));
    } else {
      // If we are tail calling and generating PIC/GOT style code load the
      // address of the callee into ECX. The value in ecx is used as target of
      // the tail jump. This is done to circumvent the ebx/callee-saved problem
      // for tail calls on PIC/GOT architectures. Normally we would just put the
      // address of GOT into ebx and then call target@PLT. But for tail calls
      // ebx would be restored (since ebx is callee saved) before jumping to the
      // target@PLT.

      // Note: The actual moving to ECX is done further down.
      GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(Callee);
      if (G && !G->getGlobal()->hasLocalLinkage() &&
          G->getGlobal()->hasDefaultVisibility())
        Callee = LowerGlobalAddress(Callee, DAG);
      else if (isa<ExternalSymbolSDNode>(Callee))
        Callee = LowerExternalSymbol(Callee, DAG);
    }
  }

  if (Is64Bit && isVarArg && !IsWin64 && !IsMustTail) {
    // From AMD64 ABI document:
    // For calls that may call functions that use varargs or stdargs
    // (prototype-less calls or calls to functions containing ellipsis (...) in
    // the declaration) %al is used as hidden argument to specify the number
    // of SSE registers used. The contents of %al do not need to match exactly
    // the number of registers, but must be an ubound on the number of SSE
    // registers used and is in the range 0 - 8 inclusive.

    // Count the number of XMM registers allocated.
    static const MCPhysReg XMMArgRegs[] = {
      X86::XMM0, X86::XMM1, X86::XMM2, X86::XMM3,
      X86::XMM4, X86::XMM5, X86::XMM6, X86::XMM7
    };
    unsigned NumXMMRegs = CCInfo.getFirstUnallocated(XMMArgRegs);
    assert((Subtarget.hasSSE1() || !NumXMMRegs)
           && "SSE registers cannot be used when SSE is disabled");

    RegsToPass.push_back(std::make_pair(unsigned(X86::AL),
                                        DAG.getConstant(NumXMMRegs, dl,
                                                        MVT::i8)));
  }

  if (isVarArg && IsMustTail) {
    const auto &Forwards = X86Info->getForwardedMustTailRegParms();
    for (const auto &F : Forwards) {
      SDValue Val = DAG.getCopyFromReg(Chain, dl, F.VReg, F.VT);
      RegsToPass.push_back(std::make_pair(unsigned(F.PReg), Val));
    }
  }

  // For tail calls lower the arguments to the 'real' stack slots.  Sibcalls
  // don't need this because the eligibility check rejects calls that require
  // shuffling arguments passed in memory.
  if (!IsSibcall && isTailCall) {
    // Force all the incoming stack arguments to be loaded from the stack
    // before any new outgoing arguments are stored to the stack, because the
    // outgoing stack slots may alias the incoming argument stack slots, and
    // the alias isn't otherwise explicit. This is slightly more conservative
    // than necessary, because it means that each store effectively depends
    // on every argument instead of just those arguments it would clobber.
    SDValue ArgChain = DAG.getStackArgumentTokenFactor(Chain);

    SmallVector<SDValue, 8> MemOpChains2;
    SDValue FIN;
    int FI = 0;
    for (unsigned I = 0, OutsIndex = 0, E = ArgLocs.size(); I != E;
         ++I, ++OutsIndex) {
      CCValAssign &VA = ArgLocs[I];

      if (VA.isRegLoc()) {
        if (VA.needsCustom()) {
          assert((CallConv == CallingConv::X86_RegCall) &&
                 "Expecting custom case only in regcall calling convention");
          // This means that we are in special case where one argument was
          // passed through two register locations - Skip the next location
          ++I;
        }

        continue;
      }

      assert(VA.isMemLoc());
      SDValue Arg = OutVals[OutsIndex];
      ISD::ArgFlagsTy Flags = Outs[OutsIndex].Flags;
      // Skip inalloca arguments.  They don't require any work.
      if (Flags.isInAlloca())
        continue;
      // Create frame index.
      int32_t Offset = VA.getLocMemOffset()+FPDiff;
      uint32_t OpSize = (VA.getLocVT().getSizeInBits()+7)/8;
      FI = MF.getFrameInfo().CreateFixedObject(OpSize, Offset, true);
      FIN = DAG.getFrameIndex(FI, getPointerTy(DAG.getDataLayout()));

      if (Flags.isByVal()) {
        // Copy relative to framepointer.
        SDValue Source = DAG.getIntPtrConstant(VA.getLocMemOffset(), dl);
        if (!StackPtr.getNode())
          StackPtr = DAG.getCopyFromReg(Chain, dl, RegInfo->getStackRegister(),
                                        getPointerTy(DAG.getDataLayout()));
        Source = DAG.getNode(ISD::ADD, dl, getPointerTy(DAG.getDataLayout()),
                             StackPtr, Source);

        MemOpChains2.push_back(CreateCopyOfByValArgument(Source, FIN,
                                                         ArgChain,
                                                         Flags, DAG, dl));
      } else {
        // Store relative to framepointer.
        MemOpChains2.push_back(DAG.getStore(
            ArgChain, dl, Arg, FIN,
            MachinePointerInfo::getFixedStack(DAG.getMachineFunction(), FI)));
      }
    }

    if (!MemOpChains2.empty())
      Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, MemOpChains2);

    // Store the return address to the appropriate stack slot.
    Chain = EmitTailCallStoreRetAddr(DAG, MF, Chain, RetAddrFrIdx,
                                     getPointerTy(DAG.getDataLayout()),
                                     RegInfo->getSlotSize(), FPDiff, dl);
  }

  // Build a sequence of copy-to-reg nodes chained together with token chain
  // and flag operands which copy the outgoing args into registers.
  SDValue InFlag;
  for (unsigned i = 0, e = RegsToPass.size(); i != e; ++i) {
    Chain = DAG.getCopyToReg(Chain, dl, RegsToPass[i].first,
                             RegsToPass[i].second, InFlag);
    InFlag = Chain.getValue(1);
  }

  if (DAG.getTarget().getCodeModel() == CodeModel::Large) {
    assert(Is64Bit && "Large code model is only legal in 64-bit mode.");
    // In the 64-bit large code model, we have to make all calls
    // through a register, since the call instruction's 32-bit
    // pc-relative offset may not be large enough to hold the whole
    // address.
  } else if (Callee->getOpcode() == ISD::GlobalAddress) {
    // If the callee is a GlobalAddress node (quite common, every direct call
    // is) turn it into a TargetGlobalAddress node so that legalize doesn't hack
    // it.
    GlobalAddressSDNode* G = cast<GlobalAddressSDNode>(Callee);

    // We should use extra load for direct calls to dllimported functions in
    // non-JIT mode.
    const GlobalValue *GV = G->getGlobal();
    if (!GV->hasDLLImportStorageClass()) {
      unsigned char OpFlags = Subtarget.classifyGlobalFunctionReference(GV);

      Callee = DAG.getTargetGlobalAddress(
          GV, dl, getPointerTy(DAG.getDataLayout()), G->getOffset(), OpFlags);

      if (OpFlags == X86II::MO_GOTPCREL) {
        // Add a wrapper.
        Callee = DAG.getNode(X86ISD::WrapperRIP, dl,
          getPointerTy(DAG.getDataLayout()), Callee);
        // Add extra indirection
        Callee = DAG.getLoad(
            getPointerTy(DAG.getDataLayout()), dl, DAG.getEntryNode(), Callee,
            MachinePointerInfo::getGOT(DAG.getMachineFunction()));
      }
    }
  } else if (ExternalSymbolSDNode *S = dyn_cast<ExternalSymbolSDNode>(Callee)) {
    const Module *Mod = DAG.getMachineFunction().getFunction()->getParent();
    unsigned char OpFlags =
        Subtarget.classifyGlobalFunctionReference(nullptr, *Mod);

    Callee = DAG.getTargetExternalSymbol(
        S->getSymbol(), getPointerTy(DAG.getDataLayout()), OpFlags);
  } else if (Subtarget.isTarget64BitILP32() &&
             Callee->getValueType(0) == MVT::i32) {
    // Zero-extend the 32-bit Callee address into a 64-bit according to x32 ABI
    Callee = DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::i64, Callee);
  }

  // Returns a chain & a flag for retval copy to use.
  SDVTList NodeTys = DAG.getVTList(MVT::Other, MVT::Glue);
  SmallVector<SDValue, 8> Ops;

  if (!IsSibcall && isTailCall) {
    Chain = DAG.getCALLSEQ_END(Chain,
                               DAG.getIntPtrConstant(NumBytesToPop, dl, true),
                               DAG.getIntPtrConstant(0, dl, true), InFlag, dl);
    InFlag = Chain.getValue(1);
  }

  Ops.push_back(Chain);
  Ops.push_back(Callee);

  if (isTailCall)
    Ops.push_back(DAG.getConstant(FPDiff, dl, MVT::i32));

  // Add argument registers to the end of the list so that they are known live
  // into the call.
  for (unsigned i = 0, e = RegsToPass.size(); i != e; ++i)
    Ops.push_back(DAG.getRegister(RegsToPass[i].first,
                                  RegsToPass[i].second.getValueType()));

  // Add a register mask operand representing the call-preserved registers.
  // If HasNCSR is asserted (attribute NoCallerSavedRegisters exists) then we
  // set X86_INTR calling convention because it has the same CSR mask
  // (same preserved registers).
  const uint32_t *Mask = RegInfo->getCallPreservedMask(
      MF, HasNCSR ? (CallingConv::ID)CallingConv::X86_INTR : CallConv);
  assert(Mask && "Missing call preserved mask for calling convention");

  // If this is an invoke in a 32-bit function using a funclet-based
  // personality, assume the function clobbers all registers. If an exception
  // is thrown, the runtime will not restore CSRs.
  // FIXME: Model this more precisely so that we can register allocate across
  // the normal edge and spill and fill across the exceptional edge.
  if (!Is64Bit && CLI.CS && CLI.CS.isInvoke()) {
    const Function *CallerFn = MF.getFunction();
    EHPersonality Pers =
        CallerFn->hasPersonalityFn()
            ? classifyEHPersonality(CallerFn->getPersonalityFn())
            : EHPersonality::Unknown;
    if (isFuncletEHPersonality(Pers))
      Mask = RegInfo->getNoPreservedMask();
  }

  // Define a new register mask from the existing mask.
  uint32_t *RegMask = nullptr;

  // In some calling conventions we need to remove the used physical registers
  // from the reg mask.
  if (CallConv == CallingConv::X86_RegCall || HasNCSR) {
    const TargetRegisterInfo *TRI = Subtarget.getRegisterInfo();

    // Allocate a new Reg Mask and copy Mask.
    RegMask = MF.allocateRegisterMask(TRI->getNumRegs());
    unsigned RegMaskSize = (TRI->getNumRegs() + 31) / 32;
    memcpy(RegMask, Mask, sizeof(uint32_t) * RegMaskSize);

    // Make sure all sub registers of the argument registers are reset
    // in the RegMask.
    for (auto const &RegPair : RegsToPass)
      for (MCSubRegIterator SubRegs(RegPair.first, TRI, /*IncludeSelf=*/true);
           SubRegs.isValid(); ++SubRegs)
        RegMask[*SubRegs / 32] &= ~(1u << (*SubRegs % 32));

    // Create the RegMask Operand according to our updated mask.
    Ops.push_back(DAG.getRegisterMask(RegMask));
  } else {
    // Create the RegMask Operand according to the static mask.
    Ops.push_back(DAG.getRegisterMask(Mask));
  }

  if (InFlag.getNode())
    Ops.push_back(InFlag);

  if (isTailCall) {
    // We used to do:
    //// If this is the first return lowered for this function, add the regs
    //// to the liveout set for the function.
    // This isn't right, although it's probably harmless on x86; liveouts
    // should be computed from returns not tail calls.  Consider a void
    // function making a tail call to a function returning int.
    MF.getFrameInfo().setHasTailCall();
    return DAG.getNode(X86ISD::TC_RETURN, dl, NodeTys, Ops);
  }

  Chain = DAG.getNode(X86ISD::CALL, dl, NodeTys, Ops);
  InFlag = Chain.getValue(1);

  // Create the CALLSEQ_END node.
  unsigned NumBytesForCalleeToPop;
  if (X86::isCalleePop(CallConv, Is64Bit, isVarArg,
                       DAG.getTarget().Options.GuaranteedTailCallOpt))
    NumBytesForCalleeToPop = NumBytes;    // Callee pops everything
  else if (!Is64Bit && !canGuaranteeTCO(CallConv) &&
           !Subtarget.getTargetTriple().isOSMSVCRT() &&
           SR == StackStructReturn)
    // If this is a call to a struct-return function, the callee
    // pops the hidden struct pointer, so we have to push it back.
    // This is common for Darwin/X86, Linux & Mingw32 targets.
    // For MSVC Win32 targets, the caller pops the hidden struct pointer.
    NumBytesForCalleeToPop = 4;
  else
    NumBytesForCalleeToPop = 0;  // Callee pops nothing.

  if (CLI.DoesNotReturn && !getTargetMachine().Options.TrapUnreachable) {
    // No need to reset the stack after the call if the call doesn't return. To
    // make the MI verify, we'll pretend the callee does it for us.
    NumBytesForCalleeToPop = NumBytes;
  }

  // Returns a flag for retval copy to use.
  if (!IsSibcall) {
    Chain = DAG.getCALLSEQ_END(Chain,
                               DAG.getIntPtrConstant(NumBytesToPop, dl, true),
                               DAG.getIntPtrConstant(NumBytesForCalleeToPop, dl,
                                                     true),
                               InFlag, dl);
    InFlag = Chain.getValue(1);
  }

  // Handle result values, copying them out of physregs into vregs that we
  // return.
  return LowerCallResult(Chain, InFlag, CallConv, isVarArg, Ins, dl, DAG,
                         InVals, RegMask);
}

//===----------------------------------------------------------------------===//
//                Fast Calling Convention (tail call) implementation
//===----------------------------------------------------------------------===//

//  Like std call, callee cleans arguments, convention except that ECX is
//  reserved for storing the tail called function address. Only 2 registers are
//  free for argument passing (inreg). Tail call optimization is performed
//  provided:
//                * tailcallopt is enabled
//                * caller/callee are fastcc
//  On X86_64 architecture with GOT-style position independent code only local
//  (within module) calls are supported at the moment.
//  To keep the stack aligned according to platform abi the function
//  GetAlignedArgumentStackSize ensures that argument delta is always multiples
//  of stack alignment. (Dynamic linkers need this - darwin's dyld for example)
//  If a tail called function callee has more arguments than the caller the
//  caller needs to make sure that there is room to move the RETADDR to. This is
//  achieved by reserving an area the size of the argument delta right after the
//  original RETADDR, but before the saved framepointer or the spilled registers
//  e.g. caller(arg1, arg2) calls callee(arg1, arg2,arg3,arg4)
//  stack layout:
//    arg1
//    arg2
//    RETADDR
//    [ new RETADDR
//      move area ]
//    (possible EBP)
//    ESI
//    EDI
//    local1 ..

/// Make the stack size align e.g 16n + 12 aligned for a 16-byte align
/// requirement.
unsigned
X86TargetLowering::GetAlignedArgumentStackSize(unsigned StackSize,
                                               SelectionDAG& DAG) const {
  const X86RegisterInfo *RegInfo = Subtarget.getRegisterInfo();
  const TargetFrameLowering &TFI = *Subtarget.getFrameLowering();
  unsigned StackAlignment = TFI.getStackAlignment();
  uint64_t AlignMask = StackAlignment - 1;
  int64_t Offset = StackSize;
  unsigned SlotSize = RegInfo->getSlotSize();
  if ( (Offset & AlignMask) <= (StackAlignment - SlotSize) ) {
    // Number smaller than 12 so just add the difference.
    Offset += ((StackAlignment - SlotSize) - (Offset & AlignMask));
  } else {
    // Mask out lower bits, add stackalignment once plus the 12 bytes.
    Offset = ((~AlignMask) & Offset) + StackAlignment +
      (StackAlignment-SlotSize);
  }
  return Offset;
}

/// Return true if the given stack call argument is already available in the
/// same position (relatively) of the caller's incoming argument stack.
static
bool MatchingStackOffset(SDValue Arg, unsigned Offset, ISD::ArgFlagsTy Flags,
                         MachineFrameInfo &MFI, const MachineRegisterInfo *MRI,
                         const X86InstrInfo *TII, const CCValAssign &VA) {
  unsigned Bytes = Arg.getValueSizeInBits() / 8;

  for (;;) {
    // Look through nodes that don't alter the bits of the incoming value.
    unsigned Op = Arg.getOpcode();
    if (Op == ISD::ZERO_EXTEND || Op == ISD::ANY_EXTEND || Op == ISD::BITCAST) {
      Arg = Arg.getOperand(0);
      continue;
    }
    if (Op == ISD::TRUNCATE) {
      const SDValue &TruncInput = Arg.getOperand(0);
      if (TruncInput.getOpcode() == ISD::AssertZext &&
          cast<VTSDNode>(TruncInput.getOperand(1))->getVT() ==
              Arg.getValueType()) {
        Arg = TruncInput.getOperand(0);
        continue;
      }
    }
    break;
  }

  int FI = INT_MAX;
  if (Arg.getOpcode() == ISD::CopyFromReg) {
    unsigned VR = cast<RegisterSDNode>(Arg.getOperand(1))->getReg();
    if (!TargetRegisterInfo::isVirtualRegister(VR))
      return false;
    MachineInstr *Def = MRI->getVRegDef(VR);
    if (!Def)
      return false;
    if (!Flags.isByVal()) {
      if (!TII->isLoadFromStackSlot(*Def, FI))
        return false;
    } else {
      unsigned Opcode = Def->getOpcode();
      if ((Opcode == X86::LEA32r || Opcode == X86::LEA64r ||
           Opcode == X86::LEA64_32r) &&
          Def->getOperand(1).isFI()) {
        FI = Def->getOperand(1).getIndex();
        Bytes = Flags.getByValSize();
      } else
        return false;
    }
  } else if (LoadSDNode *Ld = dyn_cast<LoadSDNode>(Arg)) {
    if (Flags.isByVal())
      // ByVal argument is passed in as a pointer but it's now being
      // dereferenced. e.g.
      // define @foo(%struct.X* %A) {
      //   tail call @bar(%struct.X* byval %A)
      // }
      return false;
    SDValue Ptr = Ld->getBasePtr();
    FrameIndexSDNode *FINode = dyn_cast<FrameIndexSDNode>(Ptr);
    if (!FINode)
      return false;
    FI = FINode->getIndex();
  } else if (Arg.getOpcode() == ISD::FrameIndex && Flags.isByVal()) {
    FrameIndexSDNode *FINode = cast<FrameIndexSDNode>(Arg);
    FI = FINode->getIndex();
    Bytes = Flags.getByValSize();
  } else
    return false;

  assert(FI != INT_MAX);
  if (!MFI.isFixedObjectIndex(FI))
    return false;

  if (Offset != MFI.getObjectOffset(FI))
    return false;

  // If this is not byval, check that the argument stack object is immutable.
  // inalloca and argument copy elision can create mutable argument stack
  // objects. Byval objects can be mutated, but a byval call intends to pass the
  // mutated memory.
  if (!Flags.isByVal() && !MFI.isImmutableObjectIndex(FI))
    return false;

  if (VA.getLocVT().getSizeInBits() > Arg.getValueSizeInBits()) {
    // If the argument location is wider than the argument type, check that any
    // extension flags match.
    if (Flags.isZExt() != MFI.isObjectZExt(FI) ||
        Flags.isSExt() != MFI.isObjectSExt(FI)) {
      return false;
    }
  }

  return Bytes == MFI.getObjectSize(FI);
}

/// Check whether the call is eligible for tail call optimization. Targets
/// that want to do tail call optimization should implement this function.
bool X86TargetLowering::IsEligibleForTailCallOptimization(
    SDValue Callee, CallingConv::ID CalleeCC, bool isVarArg,
    bool isCalleeStructRet, bool isCallerStructRet, Type *RetTy,
    const SmallVectorImpl<ISD::OutputArg> &Outs,
    const SmallVectorImpl<SDValue> &OutVals,
    const SmallVectorImpl<ISD::InputArg> &Ins, SelectionDAG &DAG) const {
  if (!mayTailCallThisCC(CalleeCC))
    return false;

  // If -tailcallopt is specified, make fastcc functions tail-callable.
  MachineFunction &MF = DAG.getMachineFunction();
  const Function *CallerF = MF.getFunction();

  // If the function return type is x86_fp80 and the callee return type is not,
  // then the FP_EXTEND of the call result is not a nop. It's not safe to
  // perform a tailcall optimization here.
  if (CallerF->getReturnType()->isX86_FP80Ty() && !RetTy->isX86_FP80Ty())
    return false;

  CallingConv::ID CallerCC = CallerF->getCallingConv();
  bool CCMatch = CallerCC == CalleeCC;
  bool IsCalleeWin64 = Subtarget.isCallingConvWin64(CalleeCC);
  bool IsCallerWin64 = Subtarget.isCallingConvWin64(CallerCC);

  // Win64 functions have extra shadow space for argument homing. Don't do the
  // sibcall if the caller and callee have mismatched expectations for this
  // space.
  if (IsCalleeWin64 != IsCallerWin64)
    return false;

  if (DAG.getTarget().Options.GuaranteedTailCallOpt) {
    if (canGuaranteeTCO(CalleeCC) && CCMatch)
      return true;
    return false;
  }

  // Look for obvious safe cases to perform tail call optimization that do not
  // require ABI changes. This is what gcc calls sibcall.

  // Can't do sibcall if stack needs to be dynamically re-aligned. PEI needs to
  // emit a special epilogue.
  const X86RegisterInfo *RegInfo = Subtarget.getRegisterInfo();
  if (RegInfo->needsStackRealignment(MF))
    return false;

  // Also avoid sibcall optimization if either caller or callee uses struct
  // return semantics.
  if (isCalleeStructRet || isCallerStructRet)
    return false;

  // Do not sibcall optimize vararg calls unless all arguments are passed via
  // registers.
  LLVMContext &C = *DAG.getContext();
  if (isVarArg && !Outs.empty()) {
    // Optimizing for varargs on Win64 is unlikely to be safe without
    // additional testing.
    if (IsCalleeWin64 || IsCallerWin64)
      return false;

    SmallVector<CCValAssign, 16> ArgLocs;
    CCState CCInfo(CalleeCC, isVarArg, MF, ArgLocs, C);

    CCInfo.AnalyzeCallOperands(Outs, CC_X86);
    for (unsigned i = 0, e = ArgLocs.size(); i != e; ++i)
      if (!ArgLocs[i].isRegLoc())
        return false;
  }

  // If the call result is in ST0 / ST1, it needs to be popped off the x87
  // stack.  Therefore, if it's not used by the call it is not safe to optimize
  // this into a sibcall.
  bool Unused = false;
  for (unsigned i = 0, e = Ins.size(); i != e; ++i) {
    if (!Ins[i].Used) {
      Unused = true;
      break;
    }
  }
  if (Unused) {
    SmallVector<CCValAssign, 16> RVLocs;
    CCState CCInfo(CalleeCC, false, MF, RVLocs, C);
    CCInfo.AnalyzeCallResult(Ins, RetCC_X86);
    for (unsigned i = 0, e = RVLocs.size(); i != e; ++i) {
      CCValAssign &VA = RVLocs[i];
      if (VA.getLocReg() == X86::FP0 || VA.getLocReg() == X86::FP1)
        return false;
    }
  }

  // Check that the call results are passed in the same way.
  if (!CCState::resultsCompatible(CalleeCC, CallerCC, MF, C, Ins,
                                  RetCC_X86, RetCC_X86))
    return false;
  // The callee has to preserve all registers the caller needs to preserve.
  const X86RegisterInfo *TRI = Subtarget.getRegisterInfo();
  const uint32_t *CallerPreserved = TRI->getCallPreservedMask(MF, CallerCC);
  if (!CCMatch) {
    const uint32_t *CalleePreserved = TRI->getCallPreservedMask(MF, CalleeCC);
    if (!TRI->regmaskSubsetEqual(CallerPreserved, CalleePreserved))
      return false;
  }

  unsigned StackArgsSize = 0;

  // If the callee takes no arguments then go on to check the results of the
  // call.
  if (!Outs.empty()) {
    // Check if stack adjustment is needed. For now, do not do this if any
    // argument is passed on the stack.
    SmallVector<CCValAssign, 16> ArgLocs;
    CCState CCInfo(CalleeCC, isVarArg, MF, ArgLocs, C);

    // Allocate shadow area for Win64
    if (IsCalleeWin64)
      CCInfo.AllocateStack(32, 8);

    CCInfo.AnalyzeCallOperands(Outs, CC_X86);
    StackArgsSize = CCInfo.getNextStackOffset();

    if (CCInfo.getNextStackOffset()) {
      // Check if the arguments are already laid out in the right way as
      // the caller's fixed stack objects.
      MachineFrameInfo &MFI = MF.getFrameInfo();
      const MachineRegisterInfo *MRI = &MF.getRegInfo();
      const X86InstrInfo *TII = Subtarget.getInstrInfo();
      for (unsigned i = 0, e = ArgLocs.size(); i != e; ++i) {
        CCValAssign &VA = ArgLocs[i];
        SDValue Arg = OutVals[i];
        ISD::ArgFlagsTy Flags = Outs[i].Flags;
        if (VA.getLocInfo() == CCValAssign::Indirect)
          return false;
        if (!VA.isRegLoc()) {
          if (!MatchingStackOffset(Arg, VA.getLocMemOffset(), Flags,
                                   MFI, MRI, TII, VA))
            return false;
        }
      }
    }

    bool PositionIndependent = isPositionIndependent();
    // If the tailcall address may be in a register, then make sure it's
    // possible to register allocate for it. In 32-bit, the call address can
    // only target EAX, EDX, or ECX since the tail call must be scheduled after
    // callee-saved registers are restored. These happen to be the same
    // registers used to pass 'inreg' arguments so watch out for those.
    if (!Subtarget.is64Bit() && ((!isa<GlobalAddressSDNode>(Callee) &&
                                  !isa<ExternalSymbolSDNode>(Callee)) ||
                                 PositionIndependent)) {
      unsigned NumInRegs = 0;
      // In PIC we need an extra register to formulate the address computation
      // for the callee.
      unsigned MaxInRegs = PositionIndependent ? 2 : 3;

      for (unsigned i = 0, e = ArgLocs.size(); i != e; ++i) {
        CCValAssign &VA = ArgLocs[i];
        if (!VA.isRegLoc())
          continue;
        unsigned Reg = VA.getLocReg();
        switch (Reg) {
        default: break;
        case X86::EAX: case X86::EDX: case X86::ECX:
          if (++NumInRegs == MaxInRegs)
            return false;
          break;
        }
      }
    }

    const MachineRegisterInfo &MRI = MF.getRegInfo();
    if (!parametersInCSRMatch(MRI, CallerPreserved, ArgLocs, OutVals))
      return false;
  }

  bool CalleeWillPop =
      X86::isCalleePop(CalleeCC, Subtarget.is64Bit(), isVarArg,
                       MF.getTarget().Options.GuaranteedTailCallOpt);

  if (unsigned BytesToPop =
          MF.getInfo<X86MachineFunctionInfo>()->getBytesToPopOnReturn()) {
    // If we have bytes to pop, the callee must pop them.
    bool CalleePopMatches = CalleeWillPop && BytesToPop == StackArgsSize;
    if (!CalleePopMatches)
      return false;
  } else if (CalleeWillPop && StackArgsSize > 0) {
    // If we don't have bytes to pop, make sure the callee doesn't pop any.
    return false;
  }

  return true;
}

FastISel *
X86TargetLowering::createFastISel(FunctionLoweringInfo &funcInfo,
                                  const TargetLibraryInfo *libInfo) const {
  return X86::createFastISel(funcInfo, libInfo);
}

//===----------------------------------------------------------------------===//
//                           Other Lowering Hooks
//===----------------------------------------------------------------------===//

static bool MayFoldLoad(SDValue Op) {
  return Op.hasOneUse() && ISD::isNormalLoad(Op.getNode());
}

static bool MayFoldIntoStore(SDValue Op) {
  return Op.hasOneUse() && ISD::isNormalStore(*Op.getNode()->use_begin());
}

static bool MayFoldIntoZeroExtend(SDValue Op) {
  if (Op.hasOneUse()) {
    unsigned Opcode = Op.getNode()->use_begin()->getOpcode();
    return (ISD::ZERO_EXTEND == Opcode);
  }
  return false;
}

static bool isTargetShuffle(unsigned Opcode) {
  switch(Opcode) {
  default: return false;
  case X86ISD::BLENDI:
  case X86ISD::PSHUFB:
  case X86ISD::PSHUFD:
  case X86ISD::PSHUFHW:
  case X86ISD::PSHUFLW:
  case X86ISD::SHUFP:
  case X86ISD::INSERTPS:
  case X86ISD::EXTRQI:
  case X86ISD::INSERTQI:
  case X86ISD::PALIGNR:
  case X86ISD::VSHLDQ:
  case X86ISD::VSRLDQ:
  case X86ISD::MOVLHPS:
  case X86ISD::MOVHLPS:
  case X86ISD::MOVLPS:
  case X86ISD::MOVLPD:
  case X86ISD::MOVSHDUP:
  case X86ISD::MOVSLDUP:
  case X86ISD::MOVDDUP:
  case X86ISD::MOVSS:
  case X86ISD::MOVSD:
  case X86ISD::UNPCKL:
  case X86ISD::UNPCKH:
  case X86ISD::VBROADCAST:
  case X86ISD::VPERMILPI:
  case X86ISD::VPERMILPV:
  case X86ISD::VPERM2X128:
  case X86ISD::VPERMIL2:
  case X86ISD::VPERMI:
  case X86ISD::VPPERM:
  case X86ISD::VPERMV:
  case X86ISD::VPERMV3:
  case X86ISD::VPERMIV3:
  case X86ISD::VZEXT_MOVL:
    return true;
  }
}

static bool isTargetShuffleVariableMask(unsigned Opcode) {
  switch (Opcode) {
  default: return false;
  // Target Shuffles.
  case X86ISD::PSHUFB:
  case X86ISD::VPERMILPV:
  case X86ISD::VPERMIL2:
  case X86ISD::VPPERM:
  case X86ISD::VPERMV:
  case X86ISD::VPERMV3:
  case X86ISD::VPERMIV3:
    return true;
  // 'Faux' Target Shuffles.
  case ISD::AND:
  case X86ISD::ANDNP:
    return true;
  }
}

SDValue X86TargetLowering::getReturnAddressFrameIndex(SelectionDAG &DAG) const {
  MachineFunction &MF = DAG.getMachineFunction();
  const X86RegisterInfo *RegInfo = Subtarget.getRegisterInfo();
  X86MachineFunctionInfo *FuncInfo = MF.getInfo<X86MachineFunctionInfo>();
  int ReturnAddrIndex = FuncInfo->getRAIndex();

  if (ReturnAddrIndex == 0) {
    // Set up a frame object for the return address.
    unsigned SlotSize = RegInfo->getSlotSize();
    ReturnAddrIndex = MF.getFrameInfo().CreateFixedObject(SlotSize,
                                                          -(int64_t)SlotSize,
                                                          false);
    FuncInfo->setRAIndex(ReturnAddrIndex);
  }

  return DAG.getFrameIndex(ReturnAddrIndex, getPointerTy(DAG.getDataLayout()));
}

bool X86::isOffsetSuitableForCodeModel(int64_t Offset, CodeModel::Model M,
                                       bool hasSymbolicDisplacement) {
  // Offset should fit into 32 bit immediate field.
  if (!isInt<32>(Offset))
    return false;

  // If we don't have a symbolic displacement - we don't have any extra
  // restrictions.
  if (!hasSymbolicDisplacement)
    return true;

  // FIXME: Some tweaks might be needed for medium code model.
  if (M != CodeModel::Small && M != CodeModel::Kernel)
    return false;

  // For small code model we assume that latest object is 16MB before end of 31
  // bits boundary. We may also accept pretty large negative constants knowing
  // that all objects are in the positive half of address space.
  if (M == CodeModel::Small && Offset < 16*1024*1024)
    return true;

  // For kernel code model we know that all object resist in the negative half
  // of 32bits address space. We may not accept negative offsets, since they may
  // be just off and we may accept pretty large positive ones.
  if (M == CodeModel::Kernel && Offset >= 0)
    return true;

  return false;
}

/// Determines whether the callee is required to pop its own arguments.
/// Callee pop is necessary to support tail calls.
bool X86::isCalleePop(CallingConv::ID CallingConv,
                      bool is64Bit, bool IsVarArg, bool GuaranteeTCO) {
  // If GuaranteeTCO is true, we force some calls to be callee pop so that we
  // can guarantee TCO.
  if (!IsVarArg && shouldGuaranteeTCO(CallingConv, GuaranteeTCO))
    return true;

  switch (CallingConv) {
  default:
    return false;
  case CallingConv::X86_StdCall:
  case CallingConv::X86_FastCall:
  case CallingConv::X86_ThisCall:
  case CallingConv::X86_VectorCall:
    return !is64Bit;
  }
}

/// \brief Return true if the condition is an unsigned comparison operation.
static bool isX86CCUnsigned(unsigned X86CC) {
  switch (X86CC) {
  default:
    llvm_unreachable("Invalid integer condition!");
  case X86::COND_E:
  case X86::COND_NE:
  case X86::COND_B:
  case X86::COND_A:
  case X86::COND_BE:
  case X86::COND_AE:
    return true;
  case X86::COND_G:
  case X86::COND_GE:
  case X86::COND_L:
  case X86::COND_LE:
    return false;
  }
}

static X86::CondCode TranslateIntegerX86CC(ISD::CondCode SetCCOpcode) {
  switch (SetCCOpcode) {
  default: llvm_unreachable("Invalid integer condition!");
  case ISD::SETEQ:  return X86::COND_E;
  case ISD::SETGT:  return X86::COND_G;
  case ISD::SETGE:  return X86::COND_GE;
  case ISD::SETLT:  return X86::COND_L;
  case ISD::SETLE:  return X86::COND_LE;
  case ISD::SETNE:  return X86::COND_NE;
  case ISD::SETULT: return X86::COND_B;
  case ISD::SETUGT: return X86::COND_A;
  case ISD::SETULE: return X86::COND_BE;
  case ISD::SETUGE: return X86::COND_AE;
  }
}

/// Do a one-to-one translation of a ISD::CondCode to the X86-specific
/// condition code, returning the condition code and the LHS/RHS of the
/// comparison to make.
static X86::CondCode TranslateX86CC(ISD::CondCode SetCCOpcode, const SDLoc &DL,
                               bool isFP, SDValue &LHS, SDValue &RHS,
                               SelectionDAG &DAG) {
  if (!isFP) {
    if (ConstantSDNode *RHSC = dyn_cast<ConstantSDNode>(RHS)) {
      if (SetCCOpcode == ISD::SETGT && RHSC->isAllOnesValue()) {
        // X > -1   -> X == 0, jump !sign.
        RHS = DAG.getConstant(0, DL, RHS.getValueType());
        return X86::COND_NS;
      }
      if (SetCCOpcode == ISD::SETLT && RHSC->isNullValue()) {
        // X < 0   -> X == 0, jump on sign.
        return X86::COND_S;
      }
      if (SetCCOpcode == ISD::SETLT && RHSC->getZExtValue() == 1) {
        // X < 1   -> X <= 0
        RHS = DAG.getConstant(0, DL, RHS.getValueType());
        return X86::COND_LE;
      }
    }

    return TranslateIntegerX86CC(SetCCOpcode);
  }

  // First determine if it is required or is profitable to flip the operands.

  // If LHS is a foldable load, but RHS is not, flip the condition.
  if (ISD::isNON_EXTLoad(LHS.getNode()) &&
      !ISD::isNON_EXTLoad(RHS.getNode())) {
    SetCCOpcode = getSetCCSwappedOperands(SetCCOpcode);
    std::swap(LHS, RHS);
  }

  switch (SetCCOpcode) {
  default: break;
  case ISD::SETOLT:
  case ISD::SETOLE:
  case ISD::SETUGT:
  case ISD::SETUGE:
    std::swap(LHS, RHS);
    break;
  }

  // On a floating point condition, the flags are set as follows:
  // ZF  PF  CF   op
  //  0 | 0 | 0 | X > Y
  //  0 | 0 | 1 | X < Y
  //  1 | 0 | 0 | X == Y
  //  1 | 1 | 1 | unordered
  switch (SetCCOpcode) {
  default: llvm_unreachable("Condcode should be pre-legalized away");
  case ISD::SETUEQ:
  case ISD::SETEQ:   return X86::COND_E;
  case ISD::SETOLT:              // flipped
  case ISD::SETOGT:
  case ISD::SETGT:   return X86::COND_A;
  case ISD::SETOLE:              // flipped
  case ISD::SETOGE:
  case ISD::SETGE:   return X86::COND_AE;
  case ISD::SETUGT:              // flipped
  case ISD::SETULT:
  case ISD::SETLT:   return X86::COND_B;
  case ISD::SETUGE:              // flipped
  case ISD::SETULE:
  case ISD::SETLE:   return X86::COND_BE;
  case ISD::SETONE:
  case ISD::SETNE:   return X86::COND_NE;
  case ISD::SETUO:   return X86::COND_P;
  case ISD::SETO:    return X86::COND_NP;
  case ISD::SETOEQ:
  case ISD::SETUNE:  return X86::COND_INVALID;
  }
}

/// Is there a floating point cmov for the specific X86 condition code?
/// Current x86 isa includes the following FP cmov instructions:
/// fcmovb, fcomvbe, fcomve, fcmovu, fcmovae, fcmova, fcmovne, fcmovnu.
static bool hasFPCMov(unsigned X86CC) {
  switch (X86CC) {
  default:
    return false;
  case X86::COND_B:
  case X86::COND_BE:
  case X86::COND_E:
  case X86::COND_P:
  case X86::COND_A:
  case X86::COND_AE:
  case X86::COND_NE:
  case X86::COND_NP:
    return true;
  }
}


bool X86TargetLowering::getTgtMemIntrinsic(IntrinsicInfo &Info,
                                           const CallInst &I,
                                           unsigned Intrinsic) const {

  const IntrinsicData* IntrData = getIntrinsicWithChain(Intrinsic);
  if (!IntrData)
    return false;

  Info.opc = ISD::INTRINSIC_W_CHAIN;
  Info.readMem = false;
  Info.writeMem = false;
  Info.vol = false;
  Info.offset = 0;

  switch (IntrData->Type) {
  case EXPAND_FROM_MEM: {
    Info.ptrVal = I.getArgOperand(0);
    Info.memVT = MVT::getVT(I.getType());
    Info.align = 1;
    Info.readMem = true;
    break;
  }
  case COMPRESS_TO_MEM: {
    Info.ptrVal = I.getArgOperand(0);
    Info.memVT = MVT::getVT(I.getArgOperand(1)->getType());
    Info.align = 1;
    Info.writeMem = true;
    break;
  }
  case TRUNCATE_TO_MEM_VI8:
  case TRUNCATE_TO_MEM_VI16:
  case TRUNCATE_TO_MEM_VI32: {
    Info.ptrVal = I.getArgOperand(0);
    MVT VT  = MVT::getVT(I.getArgOperand(1)->getType());
    MVT ScalarVT = MVT::INVALID_SIMPLE_VALUE_TYPE;
    if (IntrData->Type == TRUNCATE_TO_MEM_VI8)
      ScalarVT = MVT::i8;
    else if (IntrData->Type == TRUNCATE_TO_MEM_VI16)
      ScalarVT = MVT::i16;
    else if (IntrData->Type == TRUNCATE_TO_MEM_VI32)
      ScalarVT = MVT::i32;

    Info.memVT = MVT::getVectorVT(ScalarVT, VT.getVectorNumElements());
    Info.align = 1;
    Info.writeMem = true;
    break;
  }
  default:
    return false;
  }

  return true;
}

/// Returns true if the target can instruction select the
/// specified FP immediate natively. If false, the legalizer will
/// materialize the FP immediate as a load from a constant pool.
bool X86TargetLowering::isFPImmLegal(const APFloat &Imm, EVT VT) const {
  for (unsigned i = 0, e = LegalFPImmediates.size(); i != e; ++i) {
    if (Imm.bitwiseIsEqual(LegalFPImmediates[i]))
      return true;
  }
  return false;
}

bool X86TargetLowering::shouldReduceLoadWidth(SDNode *Load,
                                              ISD::LoadExtType ExtTy,
                                              EVT NewVT) const {
  // "ELF Handling for Thread-Local Storage" specifies that R_X86_64_GOTTPOFF
  // relocation target a movq or addq instruction: don't let the load shrink.
  SDValue BasePtr = cast<LoadSDNode>(Load)->getBasePtr();
  if (BasePtr.getOpcode() == X86ISD::WrapperRIP)
    if (const auto *GA = dyn_cast<GlobalAddressSDNode>(BasePtr.getOperand(0)))
      return GA->getTargetFlags() != X86II::MO_GOTTPOFF;
  return true;
}

/// \brief Returns true if it is beneficial to convert a load of a constant
/// to just the constant itself.
bool X86TargetLowering::shouldConvertConstantLoadToIntImm(const APInt &Imm,
                                                          Type *Ty) const {
  assert(Ty->isIntegerTy());

  unsigned BitSize = Ty->getPrimitiveSizeInBits();
  if (BitSize == 0 || BitSize > 64)
    return false;
  return true;
}

bool X86TargetLowering::convertSelectOfConstantsToMath(EVT VT) const {
  // TODO: It might be a win to ease or lift this restriction, but the generic
  // folds in DAGCombiner conflict with vector folds for an AVX512 target.
  if (VT.isVector() && Subtarget.hasAVX512())
    return false;

  return true;
}

bool X86TargetLowering::isExtractSubvectorCheap(EVT ResVT, EVT SrcVT,
                                                unsigned Index) const {
  if (!isOperationLegalOrCustom(ISD::EXTRACT_SUBVECTOR, ResVT))
    return false;

  // Mask vectors support all subregister combinations and operations that
  // extract half of vector.
  if (ResVT.getVectorElementType() == MVT::i1)
    return Index == 0 || ((ResVT.getSizeInBits() == SrcVT.getSizeInBits()*2) &&
                          (Index == ResVT.getVectorNumElements()));

  return (Index % ResVT.getVectorNumElements()) == 0;
}

bool X86TargetLowering::isCheapToSpeculateCttz() const {
  // Speculate cttz only if we can directly use TZCNT.
  return Subtarget.hasBMI();
}

bool X86TargetLowering::isCheapToSpeculateCtlz() const {
  // Speculate ctlz only if we can directly use LZCNT.
  return Subtarget.hasLZCNT();
}

bool X86TargetLowering::canMergeStoresTo(unsigned AddressSpace, EVT MemVT,
                                         const SelectionDAG &DAG) const {
  // Do not merge to float value size (128 bytes) if no implicit
  // float attribute is set.
  bool NoFloat = DAG.getMachineFunction().getFunction()->hasFnAttribute(
      Attribute::NoImplicitFloat);

  if (NoFloat) {
    unsigned MaxIntSize = Subtarget.is64Bit() ? 64 : 32;
    return (MemVT.getSizeInBits() <= MaxIntSize);
  }
  return true;
}

bool X86TargetLowering::isCtlzFast() const {
  return Subtarget.hasFastLZCNT();
}

bool X86TargetLowering::isMaskAndCmp0FoldingBeneficial(
    const Instruction &AndI) const {
  return true;
}

bool X86TargetLowering::hasAndNotCompare(SDValue Y) const {
  if (!Subtarget.hasBMI())
    return false;

  // There are only 32-bit and 64-bit forms for 'andn'.
  EVT VT = Y.getValueType();
  if (VT != MVT::i32 && VT != MVT::i64)
    return false;

  return true;
}

MVT X86TargetLowering::hasFastEqualityCompare(unsigned NumBits) const {
  MVT VT = MVT::getIntegerVT(NumBits);
  if (isTypeLegal(VT))
    return VT;

  // PMOVMSKB can handle this.
  if (NumBits == 128 && isTypeLegal(MVT::v16i8))
    return MVT::v16i8;

  // VPMOVMSKB can handle this.
  if (NumBits == 256 && isTypeLegal(MVT::v32i8))
    return MVT::v32i8;

  // TODO: Allow 64-bit type for 32-bit target.
  // TODO: 512-bit types should be allowed, but make sure that those
  // cases are handled in combineVectorSizedSetCCEquality().

  return MVT::INVALID_SIMPLE_VALUE_TYPE;
}

/// Val is the undef sentinel value or equal to the specified value.
static bool isUndefOrEqual(int Val, int CmpVal) {
  return ((Val == SM_SentinelUndef) || (Val == CmpVal));
}

/// Val is either the undef or zero sentinel value.
static bool isUndefOrZero(int Val) {
  return ((Val == SM_SentinelUndef) || (Val == SM_SentinelZero));
}

/// Return true if every element in Mask, beginning
/// from position Pos and ending in Pos+Size is the undef sentinel value.
static bool isUndefInRange(ArrayRef<int> Mask, unsigned Pos, unsigned Size) {
  for (unsigned i = Pos, e = Pos + Size; i != e; ++i)
    if (Mask[i] != SM_SentinelUndef)
      return false;
  return true;
}

/// Return true if Val is undef or if its value falls within the
/// specified range (L, H].
static bool isUndefOrInRange(int Val, int Low, int Hi) {
  return (Val == SM_SentinelUndef) || (Val >= Low && Val < Hi);
}

/// Return true if every element in Mask is undef or if its value
/// falls within the specified range (L, H].
static bool isUndefOrInRange(ArrayRef<int> Mask,
                             int Low, int Hi) {
  for (int M : Mask)
    if (!isUndefOrInRange(M, Low, Hi))
      return false;
  return true;
}

/// Return true if Val is undef, zero or if its value falls within the
/// specified range (L, H].
static bool isUndefOrZeroOrInRange(int Val, int Low, int Hi) {
  return isUndefOrZero(Val) || (Val >= Low && Val < Hi);
}

/// Return true if every element in Mask is undef, zero or if its value
/// falls within the specified range (L, H].
static bool isUndefOrZeroOrInRange(ArrayRef<int> Mask, int Low, int Hi) {
  for (int M : Mask)
    if (!isUndefOrZeroOrInRange(M, Low, Hi))
      return false;
  return true;
}

/// Return true if every element in Mask, beginning
/// from position Pos and ending in Pos+Size, falls within the specified
/// sequential range (Low, Low+Size]. or is undef.
static bool isSequentialOrUndefInRange(ArrayRef<int> Mask,
                                       unsigned Pos, unsigned Size, int Low) {
  for (unsigned i = Pos, e = Pos+Size; i != e; ++i, ++Low)
    if (!isUndefOrEqual(Mask[i], Low))
      return false;
  return true;
}

/// Return true if every element in Mask, beginning
/// from position Pos and ending in Pos+Size, falls within the specified
/// sequential range (Low, Low+Size], or is undef or is zero.
static bool isSequentialOrUndefOrZeroInRange(ArrayRef<int> Mask, unsigned Pos,
                                             unsigned Size, int Low) {
  for (unsigned i = Pos, e = Pos + Size; i != e; ++i, ++Low)
    if (!isUndefOrZero(Mask[i]) && Mask[i] != Low)
      return false;
  return true;
}

/// Return true if every element in Mask, beginning
/// from position Pos and ending in Pos+Size is undef or is zero.
static bool isUndefOrZeroInRange(ArrayRef<int> Mask, unsigned Pos,
                                 unsigned Size) {
  for (unsigned i = Pos, e = Pos + Size; i != e; ++i)
    if (!isUndefOrZero(Mask[i]))
      return false;
  return true;
}

/// \brief Helper function to test whether a shuffle mask could be
/// simplified by widening the elements being shuffled.
///
/// Appends the mask for wider elements in WidenedMask if valid. Otherwise
/// leaves it in an unspecified state.
///
/// NOTE: This must handle normal vector shuffle masks and *target* vector
/// shuffle masks. The latter have the special property of a '-2' representing
/// a zero-ed lane of a vector.
static bool canWidenShuffleElements(ArrayRef<int> Mask,
                                    SmallVectorImpl<int> &WidenedMask) {
  WidenedMask.assign(Mask.size() / 2, 0);
  for (int i = 0, Size = Mask.size(); i < Size; i += 2) {
    int M0 = Mask[i];
    int M1 = Mask[i + 1];

    // If both elements are undef, its trivial.
    if (M0 == SM_SentinelUndef && M1 == SM_SentinelUndef) {
      WidenedMask[i / 2] = SM_SentinelUndef;
      continue;
    }

    // Check for an undef mask and a mask value properly aligned to fit with
    // a pair of values. If we find such a case, use the non-undef mask's value.
    if (M0 == SM_SentinelUndef && M1 >= 0 && (M1 % 2) == 1) {
      WidenedMask[i / 2] = M1 / 2;
      continue;
    }
    if (M1 == SM_SentinelUndef && M0 >= 0 && (M0 % 2) == 0) {
      WidenedMask[i / 2] = M0 / 2;
      continue;
    }

    // When zeroing, we need to spread the zeroing across both lanes to widen.
    if (M0 == SM_SentinelZero || M1 == SM_SentinelZero) {
      if ((M0 == SM_SentinelZero || M0 == SM_SentinelUndef) &&
          (M1 == SM_SentinelZero || M1 == SM_SentinelUndef)) {
        WidenedMask[i / 2] = SM_SentinelZero;
        continue;
      }
      return false;
    }

    // Finally check if the two mask values are adjacent and aligned with
    // a pair.
    if (M0 != SM_SentinelUndef && (M0 % 2) == 0 && (M0 + 1) == M1) {
      WidenedMask[i / 2] = M0 / 2;
      continue;
    }

    // Otherwise we can't safely widen the elements used in this shuffle.
    return false;
  }
  assert(WidenedMask.size() == Mask.size() / 2 &&
         "Incorrect size of mask after widening the elements!");

  return true;
}

/// Returns true if Elt is a constant zero or a floating point constant +0.0.
bool X86::isZeroNode(SDValue Elt) {
  return isNullConstant(Elt) || isNullFPConstant(Elt);
}

// Build a vector of constants.
// Use an UNDEF node if MaskElt == -1.
// Split 64-bit constants in the 32-bit mode.
static SDValue getConstVector(ArrayRef<int> Values, MVT VT, SelectionDAG &DAG,
                              const SDLoc &dl, bool IsMask = false) {

  SmallVector<SDValue, 32>  Ops;
  bool Split = false;

  MVT ConstVecVT = VT;
  unsigned NumElts = VT.getVectorNumElements();
  bool In64BitMode = DAG.getTargetLoweringInfo().isTypeLegal(MVT::i64);
  if (!In64BitMode && VT.getVectorElementType() == MVT::i64) {
    ConstVecVT = MVT::getVectorVT(MVT::i32, NumElts * 2);
    Split = true;
  }

  MVT EltVT = ConstVecVT.getVectorElementType();
  for (unsigned i = 0; i < NumElts; ++i) {
    bool IsUndef = Values[i] < 0 && IsMask;
    SDValue OpNode = IsUndef ? DAG.getUNDEF(EltVT) :
      DAG.getConstant(Values[i], dl, EltVT);
    Ops.push_back(OpNode);
    if (Split)
      Ops.push_back(IsUndef ? DAG.getUNDEF(EltVT) :
                    DAG.getConstant(0, dl, EltVT));
  }
  SDValue ConstsNode = DAG.getBuildVector(ConstVecVT, dl, Ops);
  if (Split)
    ConstsNode = DAG.getBitcast(VT, ConstsNode);
  return ConstsNode;
}

static SDValue getConstVector(ArrayRef<APInt> Bits, APInt &Undefs,
                              MVT VT, SelectionDAG &DAG, const SDLoc &dl) {
  assert(Bits.size() == Undefs.getBitWidth() &&
         "Unequal constant and undef arrays");
  SmallVector<SDValue, 32> Ops;
  bool Split = false;

  MVT ConstVecVT = VT;
  unsigned NumElts = VT.getVectorNumElements();
  bool In64BitMode = DAG.getTargetLoweringInfo().isTypeLegal(MVT::i64);
  if (!In64BitMode && VT.getVectorElementType() == MVT::i64) {
    ConstVecVT = MVT::getVectorVT(MVT::i32, NumElts * 2);
    Split = true;
  }

  MVT EltVT = ConstVecVT.getVectorElementType();
  for (unsigned i = 0, e = Bits.size(); i != e; ++i) {
    if (Undefs[i]) {
      Ops.append(Split ? 2 : 1, DAG.getUNDEF(EltVT));
      continue;
    }
    const APInt &V = Bits[i];
    assert(V.getBitWidth() == VT.getScalarSizeInBits() && "Unexpected sizes");
    if (Split) {
      Ops.push_back(DAG.getConstant(V.trunc(32), dl, EltVT));
      Ops.push_back(DAG.getConstant(V.lshr(32).trunc(32), dl, EltVT));
    } else if (EltVT == MVT::f32) {
      APFloat FV(APFloat::IEEEsingle(), V);
      Ops.push_back(DAG.getConstantFP(FV, dl, EltVT));
    } else if (EltVT == MVT::f64) {
      APFloat FV(APFloat::IEEEdouble(), V);
      Ops.push_back(DAG.getConstantFP(FV, dl, EltVT));
    } else {
      Ops.push_back(DAG.getConstant(V, dl, EltVT));
    }
  }

  SDValue ConstsNode = DAG.getBuildVector(ConstVecVT, dl, Ops);
  return DAG.getBitcast(VT, ConstsNode);
}

/// Returns a vector of specified type with all zero elements.
static SDValue getZeroVector(MVT VT, const X86Subtarget &Subtarget,
                             SelectionDAG &DAG, const SDLoc &dl) {
  assert((VT.is128BitVector() || VT.is256BitVector() || VT.is512BitVector() ||
          VT.getVectorElementType() == MVT::i1) &&
         "Unexpected vector type");

  // Try to build SSE/AVX zero vectors as <N x i32> bitcasted to their dest
  // type. This ensures they get CSE'd. But if the integer type is not
  // available, use a floating-point +0.0 instead.
  SDValue Vec;
  if (!Subtarget.hasSSE2() && VT.is128BitVector()) {
    Vec = DAG.getConstantFP(+0.0, dl, MVT::v4f32);
  } else if (VT.getVectorElementType() == MVT::i1) {
    assert((Subtarget.hasBWI() || VT.getVectorNumElements() <= 16) &&
           "Unexpected vector type");
    assert((Subtarget.hasVLX() || VT.getVectorNumElements() >= 8) &&
           "Unexpected vector type");
    Vec = DAG.getConstant(0, dl, VT);
  } else {
    unsigned Num32BitElts = VT.getSizeInBits() / 32;
    Vec = DAG.getConstant(0, dl, MVT::getVectorVT(MVT::i32, Num32BitElts));
  }
  return DAG.getBitcast(VT, Vec);
}

static SDValue extractSubVector(SDValue Vec, unsigned IdxVal, SelectionDAG &DAG,
                                const SDLoc &dl, unsigned vectorWidth) {
  EVT VT = Vec.getValueType();
  EVT ElVT = VT.getVectorElementType();
  unsigned Factor = VT.getSizeInBits()/vectorWidth;
  EVT ResultVT = EVT::getVectorVT(*DAG.getContext(), ElVT,
                                  VT.getVectorNumElements()/Factor);

  // Extract the relevant vectorWidth bits.  Generate an EXTRACT_SUBVECTOR
  unsigned ElemsPerChunk = vectorWidth / ElVT.getSizeInBits();
  assert(isPowerOf2_32(ElemsPerChunk) && "Elements per chunk not power of 2");

  // This is the index of the first element of the vectorWidth-bit chunk
  // we want. Since ElemsPerChunk is a power of 2 just need to clear bits.
  IdxVal &= ~(ElemsPerChunk - 1);

  // If the input is a buildvector just emit a smaller one.
  if (Vec.getOpcode() == ISD::BUILD_VECTOR)
    return DAG.getBuildVector(ResultVT, dl,
                              Vec->ops().slice(IdxVal, ElemsPerChunk));

  SDValue VecIdx = DAG.getIntPtrConstant(IdxVal, dl);
  return DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl, ResultVT, Vec, VecIdx);
}

/// Generate a DAG to grab 128-bits from a vector > 128 bits.  This
/// sets things up to match to an AVX VEXTRACTF128 / VEXTRACTI128
/// or AVX-512 VEXTRACTF32x4 / VEXTRACTI32x4
/// instructions or a simple subregister reference. Idx is an index in the
/// 128 bits we want.  It need not be aligned to a 128-bit boundary.  That makes
/// lowering EXTRACT_VECTOR_ELT operations easier.
static SDValue extract128BitVector(SDValue Vec, unsigned IdxVal,
                                   SelectionDAG &DAG, const SDLoc &dl) {
  assert((Vec.getValueType().is256BitVector() ||
          Vec.getValueType().is512BitVector()) && "Unexpected vector size!");
  return extractSubVector(Vec, IdxVal, DAG, dl, 128);
}

/// Generate a DAG to grab 256-bits from a 512-bit vector.
static SDValue extract256BitVector(SDValue Vec, unsigned IdxVal,
                                   SelectionDAG &DAG, const SDLoc &dl) {
  assert(Vec.getValueType().is512BitVector() && "Unexpected vector size!");
  return extractSubVector(Vec, IdxVal, DAG, dl, 256);
}

static SDValue insertSubVector(SDValue Result, SDValue Vec, unsigned IdxVal,
                               SelectionDAG &DAG, const SDLoc &dl,
                               unsigned vectorWidth) {
  assert((vectorWidth == 128 || vectorWidth == 256) &&
         "Unsupported vector width");
  // Inserting UNDEF is Result
  if (Vec.isUndef())
    return Result;
  EVT VT = Vec.getValueType();
  EVT ElVT = VT.getVectorElementType();
  EVT ResultVT = Result.getValueType();

  // Insert the relevant vectorWidth bits.
  unsigned ElemsPerChunk = vectorWidth/ElVT.getSizeInBits();
  assert(isPowerOf2_32(ElemsPerChunk) && "Elements per chunk not power of 2");

  // This is the index of the first element of the vectorWidth-bit chunk
  // we want. Since ElemsPerChunk is a power of 2 just need to clear bits.
  IdxVal &= ~(ElemsPerChunk - 1);

  SDValue VecIdx = DAG.getIntPtrConstant(IdxVal, dl);
  return DAG.getNode(ISD::INSERT_SUBVECTOR, dl, ResultVT, Result, Vec, VecIdx);
}

/// Generate a DAG to put 128-bits into a vector > 128 bits.  This
/// sets things up to match to an AVX VINSERTF128/VINSERTI128 or
/// AVX-512 VINSERTF32x4/VINSERTI32x4 instructions or a
/// simple superregister reference.  Idx is an index in the 128 bits
/// we want.  It need not be aligned to a 128-bit boundary.  That makes
/// lowering INSERT_VECTOR_ELT operations easier.
static SDValue insert128BitVector(SDValue Result, SDValue Vec, unsigned IdxVal,
                                  SelectionDAG &DAG, const SDLoc &dl) {
  assert(Vec.getValueType().is128BitVector() && "Unexpected vector size!");
  return insertSubVector(Result, Vec, IdxVal, DAG, dl, 128);
}

static SDValue insert256BitVector(SDValue Result, SDValue Vec, unsigned IdxVal,
                                  SelectionDAG &DAG, const SDLoc &dl) {
  assert(Vec.getValueType().is256BitVector() && "Unexpected vector size!");
  return insertSubVector(Result, Vec, IdxVal, DAG, dl, 256);
}

// Return true if the instruction zeroes the unused upper part of the
// destination and accepts mask.
static bool isMaskedZeroUpperBitsvXi1(unsigned int Opcode) {
  switch (Opcode) {
  default:
    return false;
  case X86ISD::TESTM:
  case X86ISD::TESTNM:
  case X86ISD::PCMPEQM:
  case X86ISD::PCMPGTM:
  case X86ISD::CMPM:
  case X86ISD::CMPMU:
    return true;
  }
}

/// Insert i1-subvector to i1-vector.
static SDValue insert1BitVector(SDValue Op, SelectionDAG &DAG,
                                const X86Subtarget &Subtarget) {

  SDLoc dl(Op);
  SDValue Vec = Op.getOperand(0);
  SDValue SubVec = Op.getOperand(1);
  SDValue Idx = Op.getOperand(2);

  if (!isa<ConstantSDNode>(Idx))
    return SDValue();

  unsigned IdxVal = cast<ConstantSDNode>(Idx)->getZExtValue();
  if (IdxVal == 0  && Vec.isUndef()) // the operation is legal
    return Op;

  MVT OpVT = Op.getSimpleValueType();
  MVT SubVecVT = SubVec.getSimpleValueType();
  unsigned NumElems = OpVT.getVectorNumElements();
  unsigned SubVecNumElems = SubVecVT.getVectorNumElements();

  assert(IdxVal + SubVecNumElems <= NumElems &&
         IdxVal % SubVecVT.getSizeInBits() == 0 &&
         "Unexpected index value in INSERT_SUBVECTOR");

  // There are 3 possible cases:
  // 1. Subvector should be inserted in the lower part (IdxVal == 0)
  // 2. Subvector should be inserted in the upper part
  //    (IdxVal + SubVecNumElems == NumElems)
  // 3. Subvector should be inserted in the middle (for example v2i1
  //    to v16i1, index 2)

  // If this node widens - by concatenating zeroes - the type of the result
  // of a node with instruction that zeroes all upper (irrelevant) bits of the
  // output register, mark this node as legal to enable replacing them with
  // the v8i1 version of the previous instruction during instruction selection.
  // For example, VPCMPEQDZ128rr instruction stores its v4i1 result in a k-reg,
  // while zeroing all the upper remaining 60 bits of the register. if the
  // result of such instruction is inserted into an allZeroVector, then we can
  // safely remove insert_vector (in instruction selection) as the cmp instr
  // already zeroed the rest of the register.
  if (ISD::isBuildVectorAllZeros(Vec.getNode()) && IdxVal == 0 &&
      (isMaskedZeroUpperBitsvXi1(SubVec.getOpcode()) ||
       (SubVec.getOpcode() == ISD::AND &&
        (isMaskedZeroUpperBitsvXi1(SubVec.getOperand(0).getOpcode()) ||
         isMaskedZeroUpperBitsvXi1(SubVec.getOperand(1).getOpcode())))))
    return Op;

  // extend to natively supported kshift
  MVT MinVT = Subtarget.hasDQI() ? MVT::v8i1 : MVT::v16i1;
  MVT WideOpVT = OpVT;
  if (OpVT.getSizeInBits() < MinVT.getStoreSizeInBits())
    WideOpVT = MinVT;

  SDValue ZeroIdx = DAG.getIntPtrConstant(0, dl);
  SDValue Undef = DAG.getUNDEF(WideOpVT);
  SDValue WideSubVec = DAG.getNode(ISD::INSERT_SUBVECTOR, dl, WideOpVT,
                                   Undef, SubVec, ZeroIdx);

  // Extract sub-vector if require.
  auto ExtractSubVec = [&](SDValue V) {
    return (WideOpVT == OpVT) ? V : DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl,
                                                OpVT, V, ZeroIdx);
  };

  if (Vec.isUndef()) {
    if (IdxVal != 0) {
      SDValue ShiftBits = DAG.getConstant(IdxVal, dl, MVT::i8);
      WideSubVec = DAG.getNode(X86ISD::KSHIFTL, dl, WideOpVT, WideSubVec,
                               ShiftBits);
    }
    return ExtractSubVec(WideSubVec);
  }

  if (ISD::isBuildVectorAllZeros(Vec.getNode())) {
    NumElems = WideOpVT.getVectorNumElements();
    unsigned ShiftLeft = NumElems - SubVecNumElems;
    unsigned ShiftRight = NumElems - SubVecNumElems - IdxVal;
    Vec = DAG.getNode(X86ISD::KSHIFTL, dl, WideOpVT, WideSubVec,
                      DAG.getConstant(ShiftLeft, dl, MVT::i8));
    Vec = ShiftRight ? DAG.getNode(X86ISD::KSHIFTR, dl, WideOpVT, Vec,
      DAG.getConstant(ShiftRight, dl, MVT::i8)) : Vec;
    return ExtractSubVec(Vec);
  }

  if (IdxVal == 0) {
    // Zero lower bits of the Vec
    SDValue ShiftBits = DAG.getConstant(SubVecNumElems, dl, MVT::i8);
    Vec = DAG.getNode(ISD::INSERT_SUBVECTOR, dl, WideOpVT, Undef, Vec, ZeroIdx);
    Vec = DAG.getNode(X86ISD::KSHIFTR, dl, WideOpVT, Vec, ShiftBits);
    Vec = DAG.getNode(X86ISD::KSHIFTL, dl, WideOpVT, Vec, ShiftBits);
    // Merge them together, SubVec should be zero extended.
    WideSubVec = DAG.getNode(ISD::INSERT_SUBVECTOR, dl, WideOpVT,
                             getZeroVector(WideOpVT, Subtarget, DAG, dl),
                             SubVec, ZeroIdx);
    Vec =  DAG.getNode(ISD::OR, dl, WideOpVT, Vec, WideSubVec);
    return ExtractSubVec(Vec);
  }

  // Simple case when we put subvector in the upper part
  if (IdxVal + SubVecNumElems == NumElems) {
    // Zero upper bits of the Vec
    WideSubVec = DAG.getNode(X86ISD::KSHIFTL, dl, WideOpVT, WideSubVec,
                             DAG.getConstant(IdxVal, dl, MVT::i8));
    SDValue ShiftBits = DAG.getConstant(SubVecNumElems, dl, MVT::i8);
    Vec = DAG.getNode(ISD::INSERT_SUBVECTOR, dl, WideOpVT, Undef, Vec, ZeroIdx);
    Vec = DAG.getNode(X86ISD::KSHIFTL, dl, WideOpVT, Vec, ShiftBits);
    Vec = DAG.getNode(X86ISD::KSHIFTR, dl, WideOpVT, Vec, ShiftBits);
    Vec = DAG.getNode(ISD::OR, dl, WideOpVT, Vec, WideSubVec);
    return ExtractSubVec(Vec);
  }
  // Subvector should be inserted in the middle - use shuffle
  WideSubVec = DAG.getNode(ISD::INSERT_SUBVECTOR, dl, OpVT, Undef,
                           SubVec, ZeroIdx);
  SmallVector<int, 64> Mask;
  for (unsigned i = 0; i < NumElems; ++i)
    Mask.push_back(i >= IdxVal && i < IdxVal + SubVecNumElems ?
                    i : i + NumElems);
  return DAG.getVectorShuffle(OpVT, dl, WideSubVec, Vec, Mask);
}

/// Concat two 128-bit vectors into a 256 bit vector using VINSERTF128
/// instructions. This is used because creating CONCAT_VECTOR nodes of
/// BUILD_VECTORS returns a larger BUILD_VECTOR while we're trying to lower
/// large BUILD_VECTORS.
static SDValue concat128BitVectors(SDValue V1, SDValue V2, EVT VT,
                                   unsigned NumElems, SelectionDAG &DAG,
                                   const SDLoc &dl) {
  SDValue V = insert128BitVector(DAG.getUNDEF(VT), V1, 0, DAG, dl);
  return insert128BitVector(V, V2, NumElems / 2, DAG, dl);
}

static SDValue concat256BitVectors(SDValue V1, SDValue V2, EVT VT,
                                   unsigned NumElems, SelectionDAG &DAG,
                                   const SDLoc &dl) {
  SDValue V = insert256BitVector(DAG.getUNDEF(VT), V1, 0, DAG, dl);
  return insert256BitVector(V, V2, NumElems / 2, DAG, dl);
}

/// Returns a vector of specified type with all bits set.
/// Always build ones vectors as <4 x i32>, <8 x i32> or <16 x i32>.
/// Then bitcast to their original type, ensuring they get CSE'd.
static SDValue getOnesVector(EVT VT, SelectionDAG &DAG, const SDLoc &dl) {
  assert((VT.is128BitVector() || VT.is256BitVector() || VT.is512BitVector()) &&
         "Expected a 128/256/512-bit vector type");

  APInt Ones = APInt::getAllOnesValue(32);
  unsigned NumElts = VT.getSizeInBits() / 32;
  SDValue Vec = DAG.getConstant(Ones, dl, MVT::getVectorVT(MVT::i32, NumElts));
  return DAG.getBitcast(VT, Vec);
}

static SDValue getExtendInVec(unsigned Opc, const SDLoc &DL, EVT VT, SDValue In,
                              SelectionDAG &DAG) {
  EVT InVT = In.getValueType();
  assert((X86ISD::VSEXT == Opc || X86ISD::VZEXT == Opc) && "Unexpected opcode");

  if (VT.is128BitVector() && InVT.is128BitVector())
    return X86ISD::VSEXT == Opc ? DAG.getSignExtendVectorInReg(In, DL, VT)
                                : DAG.getZeroExtendVectorInReg(In, DL, VT);

  // For 256-bit vectors, we only need the lower (128-bit) input half.
  // For 512-bit vectors, we only need the lower input half or quarter.
  if (VT.getSizeInBits() > 128 && InVT.getSizeInBits() > 128) {
    int Scale = VT.getScalarSizeInBits() / InVT.getScalarSizeInBits();
    In = extractSubVector(In, 0, DAG, DL,
                          std::max(128, (int)VT.getSizeInBits() / Scale));
  }

  return DAG.getNode(Opc, DL, VT, In);
}

/// Returns a vector_shuffle node for an unpackl operation.
static SDValue getUnpackl(SelectionDAG &DAG, const SDLoc &dl, MVT VT,
                          SDValue V1, SDValue V2) {
  SmallVector<int, 8> Mask;
  createUnpackShuffleMask(VT, Mask, /* Lo = */ true, /* Unary = */ false);
  return DAG.getVectorShuffle(VT, dl, V1, V2, Mask);
}

/// Returns a vector_shuffle node for an unpackh operation.
static SDValue getUnpackh(SelectionDAG &DAG, const SDLoc &dl, MVT VT,
                          SDValue V1, SDValue V2) {
  SmallVector<int, 8> Mask;
  createUnpackShuffleMask(VT, Mask, /* Lo = */ false, /* Unary = */ false);
  return DAG.getVectorShuffle(VT, dl, V1, V2, Mask);
}

/// Return a vector_shuffle of the specified vector of zero or undef vector.
/// This produces a shuffle where the low element of V2 is swizzled into the
/// zero/undef vector, landing at element Idx.
/// This produces a shuffle mask like 4,1,2,3 (idx=0) or  0,1,2,4 (idx=3).
static SDValue getShuffleVectorZeroOrUndef(SDValue V2, int Idx,
                                           bool IsZero,
                                           const X86Subtarget &Subtarget,
                                           SelectionDAG &DAG) {
  MVT VT = V2.getSimpleValueType();
  SDValue V1 = IsZero
    ? getZeroVector(VT, Subtarget, DAG, SDLoc(V2)) : DAG.getUNDEF(VT);
  int NumElems = VT.getVectorNumElements();
  SmallVector<int, 16> MaskVec(NumElems);
  for (int i = 0; i != NumElems; ++i)
    // If this is the insertion idx, put the low elt of V2 here.
    MaskVec[i] = (i == Idx) ? NumElems : i;
  return DAG.getVectorShuffle(VT, SDLoc(V2), V1, V2, MaskVec);
}

static SDValue peekThroughBitcasts(SDValue V) {
  while (V.getNode() && V.getOpcode() == ISD::BITCAST)
    V = V.getOperand(0);
  return V;
}

static SDValue peekThroughOneUseBitcasts(SDValue V) {
  while (V.getNode() && V.getOpcode() == ISD::BITCAST &&
         V.getOperand(0).hasOneUse())
    V = V.getOperand(0);
  return V;
}

static const Constant *getTargetConstantFromNode(SDValue Op) {
  Op = peekThroughBitcasts(Op);

  auto *Load = dyn_cast<LoadSDNode>(Op);
  if (!Load)
    return nullptr;

  SDValue Ptr = Load->getBasePtr();
  if (Ptr->getOpcode() == X86ISD::Wrapper ||
      Ptr->getOpcode() == X86ISD::WrapperRIP)
    Ptr = Ptr->getOperand(0);

  auto *CNode = dyn_cast<ConstantPoolSDNode>(Ptr);
  if (!CNode || CNode->isMachineConstantPoolEntry())
    return nullptr;

  return dyn_cast<Constant>(CNode->getConstVal());
}

// Extract raw constant bits from constant pools.
static bool getTargetConstantBitsFromNode(SDValue Op, unsigned EltSizeInBits,
                                          APInt &UndefElts,
                                          SmallVectorImpl<APInt> &EltBits,
                                          bool AllowWholeUndefs = true,
                                          bool AllowPartialUndefs = true) {
  assert(EltBits.empty() && "Expected an empty EltBits vector");

  Op = peekThroughBitcasts(Op);

  EVT VT = Op.getValueType();
  unsigned SizeInBits = VT.getSizeInBits();
  assert((SizeInBits % EltSizeInBits) == 0 && "Can't split constant!");
  unsigned NumElts = SizeInBits / EltSizeInBits;

  // Bitcast a source array of element bits to the target size.
  auto CastBitData = [&](APInt &UndefSrcElts, ArrayRef<APInt> SrcEltBits) {
    unsigned NumSrcElts = UndefSrcElts.getBitWidth();
    unsigned SrcEltSizeInBits = SrcEltBits[0].getBitWidth();
    assert((NumSrcElts * SrcEltSizeInBits) == SizeInBits &&
           "Constant bit sizes don't match");

    // Don't split if we don't allow undef bits.
    bool AllowUndefs = AllowWholeUndefs || AllowPartialUndefs;
    if (UndefSrcElts.getBoolValue() && !AllowUndefs)
      return false;

    // If we're already the right size, don't bother bitcasting.
    if (NumSrcElts == NumElts) {
      UndefElts = UndefSrcElts;
      EltBits.assign(SrcEltBits.begin(), SrcEltBits.end());
      return true;
    }

    // Extract all the undef/constant element data and pack into single bitsets.
    APInt UndefBits(SizeInBits, 0);
    APInt MaskBits(SizeInBits, 0);

    for (unsigned i = 0; i != NumSrcElts; ++i) {
      unsigned BitOffset = i * SrcEltSizeInBits;
      if (UndefSrcElts[i])
        UndefBits.setBits(BitOffset, BitOffset + SrcEltSizeInBits);
      MaskBits.insertBits(SrcEltBits[i], BitOffset);
    }

    // Split the undef/constant single bitset data into the target elements.
    UndefElts = APInt(NumElts, 0);
    EltBits.resize(NumElts, APInt(EltSizeInBits, 0));

    for (unsigned i = 0; i != NumElts; ++i) {
      unsigned BitOffset = i * EltSizeInBits;
      APInt UndefEltBits = UndefBits.extractBits(EltSizeInBits, BitOffset);

      // Only treat an element as UNDEF if all bits are UNDEF.
      if (UndefEltBits.isAllOnesValue()) {
        if (!AllowWholeUndefs)
          return false;
        UndefElts.setBit(i);
        continue;
      }

      // If only some bits are UNDEF then treat them as zero (or bail if not
      // supported).
      if (UndefEltBits.getBoolValue() && !AllowPartialUndefs)
        return false;

      APInt Bits = MaskBits.extractBits(EltSizeInBits, BitOffset);
      EltBits[i] = Bits.getZExtValue();
    }
    return true;
  };

  // Collect constant bits and insert into mask/undef bit masks.
  auto CollectConstantBits = [](const Constant *Cst, APInt &Mask, APInt &Undefs,
                                unsigned UndefBitIndex) {
    if (!Cst)
      return false;
    if (isa<UndefValue>(Cst)) {
      Undefs.setBit(UndefBitIndex);
      return true;
    }
    if (auto *CInt = dyn_cast<ConstantInt>(Cst)) {
      Mask = CInt->getValue();
      return true;
    }
    if (auto *CFP = dyn_cast<ConstantFP>(Cst)) {
      Mask = CFP->getValueAPF().bitcastToAPInt();
      return true;
    }
    return false;
  };

  // Handle UNDEFs.
  if (Op.isUndef()) {
    APInt UndefSrcElts = APInt::getAllOnesValue(NumElts);
    SmallVector<APInt, 64> SrcEltBits(NumElts, APInt(EltSizeInBits, 0));
    return CastBitData(UndefSrcElts, SrcEltBits);
  }

  // Extract scalar constant bits.
  if (auto *Cst = dyn_cast<ConstantSDNode>(Op)) {
    APInt UndefSrcElts = APInt::getNullValue(1);
    SmallVector<APInt, 64> SrcEltBits(1, Cst->getAPIntValue());
    return CastBitData(UndefSrcElts, SrcEltBits);
  }

  // Extract constant bits from build vector.
  if (ISD::isBuildVectorOfConstantSDNodes(Op.getNode())) {
    unsigned SrcEltSizeInBits = VT.getScalarSizeInBits();
    unsigned NumSrcElts = SizeInBits / SrcEltSizeInBits;

    APInt UndefSrcElts(NumSrcElts, 0);
    SmallVector<APInt, 64> SrcEltBits(NumSrcElts, APInt(SrcEltSizeInBits, 0));
    for (unsigned i = 0, e = Op.getNumOperands(); i != e; ++i) {
      const SDValue &Src = Op.getOperand(i);
      if (Src.isUndef()) {
        UndefSrcElts.setBit(i);
        continue;
      }
      auto *Cst = cast<ConstantSDNode>(Src);
      SrcEltBits[i] = Cst->getAPIntValue().zextOrTrunc(SrcEltSizeInBits);
    }
    return CastBitData(UndefSrcElts, SrcEltBits);
  }

  // Extract constant bits from constant pool vector.
  if (auto *Cst = getTargetConstantFromNode(Op)) {
    Type *CstTy = Cst->getType();
    if (!CstTy->isVectorTy() || (SizeInBits != CstTy->getPrimitiveSizeInBits()))
      return false;

    unsigned SrcEltSizeInBits = CstTy->getScalarSizeInBits();
    unsigned NumSrcElts = CstTy->getVectorNumElements();

    APInt UndefSrcElts(NumSrcElts, 0);
    SmallVector<APInt, 64> SrcEltBits(NumSrcElts, APInt(SrcEltSizeInBits, 0));
    for (unsigned i = 0; i != NumSrcElts; ++i)
      if (!CollectConstantBits(Cst->getAggregateElement(i), SrcEltBits[i],
                               UndefSrcElts, i))
        return false;

    return CastBitData(UndefSrcElts, SrcEltBits);
  }

  // Extract constant bits from a broadcasted constant pool scalar.
  if (Op.getOpcode() == X86ISD::VBROADCAST &&
      EltSizeInBits <= VT.getScalarSizeInBits()) {
    if (auto *Broadcast = getTargetConstantFromNode(Op.getOperand(0))) {
      unsigned SrcEltSizeInBits = Broadcast->getType()->getScalarSizeInBits();
      unsigned NumSrcElts = SizeInBits / SrcEltSizeInBits;

      APInt UndefSrcElts(NumSrcElts, 0);
      SmallVector<APInt, 64> SrcEltBits(1, APInt(SrcEltSizeInBits, 0));
      if (CollectConstantBits(Broadcast, SrcEltBits[0], UndefSrcElts, 0)) {
        if (UndefSrcElts[0])
          UndefSrcElts.setBits(0, NumSrcElts);
        SrcEltBits.append(NumSrcElts - 1, SrcEltBits[0]);
        return CastBitData(UndefSrcElts, SrcEltBits);
      }
    }
  }

  // Extract a rematerialized scalar constant insertion.
  if (Op.getOpcode() == X86ISD::VZEXT_MOVL &&
      Op.getOperand(0).getOpcode() == ISD::SCALAR_TO_VECTOR &&
      isa<ConstantSDNode>(Op.getOperand(0).getOperand(0))) {
    unsigned SrcEltSizeInBits = VT.getScalarSizeInBits();
    unsigned NumSrcElts = SizeInBits / SrcEltSizeInBits;

    APInt UndefSrcElts(NumSrcElts, 0);
    SmallVector<APInt, 64> SrcEltBits;
    auto *CN = cast<ConstantSDNode>(Op.getOperand(0).getOperand(0));
    SrcEltBits.push_back(CN->getAPIntValue().zextOrTrunc(SrcEltSizeInBits));
    SrcEltBits.append(NumSrcElts - 1, APInt(SrcEltSizeInBits, 0));
    return CastBitData(UndefSrcElts, SrcEltBits);
  }

  return false;
}

static bool getTargetShuffleMaskIndices(SDValue MaskNode,
                                        unsigned MaskEltSizeInBits,
                                        SmallVectorImpl<uint64_t> &RawMask) {
  APInt UndefElts;
  SmallVector<APInt, 64> EltBits;

  // Extract the raw target constant bits.
  // FIXME: We currently don't support UNDEF bits or mask entries.
  if (!getTargetConstantBitsFromNode(MaskNode, MaskEltSizeInBits, UndefElts,
                                     EltBits, /* AllowWholeUndefs */ false,
                                     /* AllowPartialUndefs */ false))
    return false;

  // Insert the extracted elements into the mask.
  for (APInt Elt : EltBits)
    RawMask.push_back(Elt.getZExtValue());

  return true;
}

/// Create a shuffle mask that matches the PACKSS/PACKUS truncation.
/// Note: This ignores saturation, so inputs must be checked first.
static void createPackShuffleMask(MVT VT, SmallVectorImpl<int> &Mask,
                                  bool Unary) {
  assert(Mask.empty() && "Expected an empty shuffle mask vector");
  unsigned NumElts = VT.getVectorNumElements();
  unsigned NumLanes = VT.getSizeInBits() / 128;
  unsigned NumEltsPerLane = 128 / VT.getScalarSizeInBits();
  unsigned Offset = Unary ? 0 : NumElts;

  for (unsigned Lane = 0; Lane != NumLanes; ++Lane) {
    for (unsigned Elt = 0; Elt != NumEltsPerLane; Elt += 2)
      Mask.push_back(Elt + (Lane * NumEltsPerLane));
    for (unsigned Elt = 0; Elt != NumEltsPerLane; Elt += 2)
      Mask.push_back(Elt + (Lane * NumEltsPerLane) + Offset);
  }
}

/// Calculates the shuffle mask corresponding to the target-specific opcode.
/// If the mask could be calculated, returns it in \p Mask, returns the shuffle
/// operands in \p Ops, and returns true.
/// Sets \p IsUnary to true if only one source is used. Note that this will set
/// IsUnary for shuffles which use a single input multiple times, and in those
/// cases it will adjust the mask to only have indices within that single input.
/// It is an error to call this with non-empty Mask/Ops vectors.
static bool getTargetShuffleMask(SDNode *N, MVT VT, bool AllowSentinelZero,
                                 SmallVectorImpl<SDValue> &Ops,
                                 SmallVectorImpl<int> &Mask, bool &IsUnary) {
  unsigned NumElems = VT.getVectorNumElements();
  SDValue ImmN;

  assert(Mask.empty() && "getTargetShuffleMask expects an empty Mask vector");
  assert(Ops.empty() && "getTargetShuffleMask expects an empty Ops vector");

  IsUnary = false;
  bool IsFakeUnary = false;
  switch(N->getOpcode()) {
  case X86ISD::BLENDI:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    ImmN = N->getOperand(N->getNumOperands()-1);
    DecodeBLENDMask(VT, cast<ConstantSDNode>(ImmN)->getZExtValue(), Mask);
    IsUnary = IsFakeUnary = N->getOperand(0) == N->getOperand(1);
    break;
  case X86ISD::SHUFP:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    ImmN = N->getOperand(N->getNumOperands()-1);
    DecodeSHUFPMask(VT, cast<ConstantSDNode>(ImmN)->getZExtValue(), Mask);
    IsUnary = IsFakeUnary = N->getOperand(0) == N->getOperand(1);
    break;
  case X86ISD::INSERTPS:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    ImmN = N->getOperand(N->getNumOperands()-1);
    DecodeINSERTPSMask(cast<ConstantSDNode>(ImmN)->getZExtValue(), Mask);
    IsUnary = IsFakeUnary = N->getOperand(0) == N->getOperand(1);
    break;
  case X86ISD::EXTRQI:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    if (isa<ConstantSDNode>(N->getOperand(1)) &&
        isa<ConstantSDNode>(N->getOperand(2))) {
      int BitLen = N->getConstantOperandVal(1);
      int BitIdx = N->getConstantOperandVal(2);
      DecodeEXTRQIMask(VT, BitLen, BitIdx, Mask);
      IsUnary = true;
    }
    break;
  case X86ISD::INSERTQI:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    if (isa<ConstantSDNode>(N->getOperand(2)) &&
        isa<ConstantSDNode>(N->getOperand(3))) {
      int BitLen = N->getConstantOperandVal(2);
      int BitIdx = N->getConstantOperandVal(3);
      DecodeINSERTQIMask(VT, BitLen, BitIdx, Mask);
      IsUnary = IsFakeUnary = N->getOperand(0) == N->getOperand(1);
    }
    break;
  case X86ISD::UNPCKH:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    DecodeUNPCKHMask(VT, Mask);
    IsUnary = IsFakeUnary = N->getOperand(0) == N->getOperand(1);
    break;
  case X86ISD::UNPCKL:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    DecodeUNPCKLMask(VT, Mask);
    IsUnary = IsFakeUnary = N->getOperand(0) == N->getOperand(1);
    break;
  case X86ISD::MOVHLPS:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    DecodeMOVHLPSMask(NumElems, Mask);
    IsUnary = IsFakeUnary = N->getOperand(0) == N->getOperand(1);
    break;
  case X86ISD::MOVLHPS:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    DecodeMOVLHPSMask(NumElems, Mask);
    IsUnary = IsFakeUnary = N->getOperand(0) == N->getOperand(1);
    break;
  case X86ISD::PALIGNR:
    assert(VT.getScalarType() == MVT::i8 && "Byte vector expected");
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    ImmN = N->getOperand(N->getNumOperands()-1);
    DecodePALIGNRMask(VT, cast<ConstantSDNode>(ImmN)->getZExtValue(), Mask);
    IsUnary = IsFakeUnary = N->getOperand(0) == N->getOperand(1);
    Ops.push_back(N->getOperand(1));
    Ops.push_back(N->getOperand(0));
    break;
  case X86ISD::VSHLDQ:
    assert(VT.getScalarType() == MVT::i8 && "Byte vector expected");
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    ImmN = N->getOperand(N->getNumOperands() - 1);
    DecodePSLLDQMask(VT, cast<ConstantSDNode>(ImmN)->getZExtValue(), Mask);
    IsUnary = true;
    break;
  case X86ISD::VSRLDQ:
    assert(VT.getScalarType() == MVT::i8 && "Byte vector expected");
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    ImmN = N->getOperand(N->getNumOperands() - 1);
    DecodePSRLDQMask(VT, cast<ConstantSDNode>(ImmN)->getZExtValue(), Mask);
    IsUnary = true;
    break;
  case X86ISD::PSHUFD:
  case X86ISD::VPERMILPI:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    ImmN = N->getOperand(N->getNumOperands()-1);
    DecodePSHUFMask(VT, cast<ConstantSDNode>(ImmN)->getZExtValue(), Mask);
    IsUnary = true;
    break;
  case X86ISD::PSHUFHW:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    ImmN = N->getOperand(N->getNumOperands()-1);
    DecodePSHUFHWMask(VT, cast<ConstantSDNode>(ImmN)->getZExtValue(), Mask);
    IsUnary = true;
    break;
  case X86ISD::PSHUFLW:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    ImmN = N->getOperand(N->getNumOperands()-1);
    DecodePSHUFLWMask(VT, cast<ConstantSDNode>(ImmN)->getZExtValue(), Mask);
    IsUnary = true;
    break;
  case X86ISD::VZEXT_MOVL:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    DecodeZeroMoveLowMask(VT, Mask);
    IsUnary = true;
    break;
  case X86ISD::VBROADCAST: {
    SDValue N0 = N->getOperand(0);
    // See if we're broadcasting from index 0 of an EXTRACT_SUBVECTOR. If so,
    // add the pre-extracted value to the Ops vector.
    if (N0.getOpcode() == ISD::EXTRACT_SUBVECTOR &&
        N0.getOperand(0).getValueType() == VT &&
        N0.getConstantOperandVal(1) == 0)
      Ops.push_back(N0.getOperand(0));

    // We only decode broadcasts of same-sized vectors, unless the broadcast
    // came from an extract from the original width. If we found one, we
    // pushed it the Ops vector above.
    if (N0.getValueType() == VT || !Ops.empty()) {
      DecodeVectorBroadcast(VT, Mask);
      IsUnary = true;
      break;
    }
    return false;
  }
  case X86ISD::VPERMILPV: {
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    IsUnary = true;
    SDValue MaskNode = N->getOperand(1);
    unsigned MaskEltSize = VT.getScalarSizeInBits();
    SmallVector<uint64_t, 32> RawMask;
    if (getTargetShuffleMaskIndices(MaskNode, MaskEltSize, RawMask)) {
      DecodeVPERMILPMask(VT, RawMask, Mask);
      break;
    }
    if (auto *C = getTargetConstantFromNode(MaskNode)) {
      DecodeVPERMILPMask(C, MaskEltSize, Mask);
      break;
    }
    return false;
  }
  case X86ISD::PSHUFB: {
    assert(VT.getScalarType() == MVT::i8 && "Byte vector expected");
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    IsUnary = true;
    SDValue MaskNode = N->getOperand(1);
    SmallVector<uint64_t, 32> RawMask;
    if (getTargetShuffleMaskIndices(MaskNode, 8, RawMask)) {
      DecodePSHUFBMask(RawMask, Mask);
      break;
    }
    if (auto *C = getTargetConstantFromNode(MaskNode)) {
      DecodePSHUFBMask(C, Mask);
      break;
    }
    return false;
  }
  case X86ISD::VPERMI:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    ImmN = N->getOperand(N->getNumOperands()-1);
    DecodeVPERMMask(VT, cast<ConstantSDNode>(ImmN)->getZExtValue(), Mask);
    IsUnary = true;
    break;
  case X86ISD::MOVSS:
  case X86ISD::MOVSD:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    DecodeScalarMoveMask(VT, /* IsLoad */ false, Mask);
    break;
  case X86ISD::VPERM2X128:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    ImmN = N->getOperand(N->getNumOperands()-1);
    DecodeVPERM2X128Mask(VT, cast<ConstantSDNode>(ImmN)->getZExtValue(), Mask);
    IsUnary = IsFakeUnary = N->getOperand(0) == N->getOperand(1);
    break;
  case X86ISD::MOVSLDUP:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    DecodeMOVSLDUPMask(VT, Mask);
    IsUnary = true;
    break;
  case X86ISD::MOVSHDUP:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    DecodeMOVSHDUPMask(VT, Mask);
    IsUnary = true;
    break;
  case X86ISD::MOVDDUP:
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    DecodeMOVDDUPMask(VT, Mask);
    IsUnary = true;
    break;
  case X86ISD::MOVLPD:
  case X86ISD::MOVLPS:
    // Not yet implemented
    return false;
  case X86ISD::VPERMIL2: {
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    IsUnary = IsFakeUnary = N->getOperand(0) == N->getOperand(1);
    unsigned MaskEltSize = VT.getScalarSizeInBits();
    SDValue MaskNode = N->getOperand(2);
    SDValue CtrlNode = N->getOperand(3);
    if (ConstantSDNode *CtrlOp = dyn_cast<ConstantSDNode>(CtrlNode)) {
      unsigned CtrlImm = CtrlOp->getZExtValue();
      SmallVector<uint64_t, 32> RawMask;
      if (getTargetShuffleMaskIndices(MaskNode, MaskEltSize, RawMask)) {
        DecodeVPERMIL2PMask(VT, CtrlImm, RawMask, Mask);
        break;
      }
      if (auto *C = getTargetConstantFromNode(MaskNode)) {
        DecodeVPERMIL2PMask(C, CtrlImm, MaskEltSize, Mask);
        break;
      }
    }
    return false;
  }
  case X86ISD::VPPERM: {
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    IsUnary = IsFakeUnary = N->getOperand(0) == N->getOperand(1);
    SDValue MaskNode = N->getOperand(2);
    SmallVector<uint64_t, 32> RawMask;
    if (getTargetShuffleMaskIndices(MaskNode, 8, RawMask)) {
      DecodeVPPERMMask(RawMask, Mask);
      break;
    }
    if (auto *C = getTargetConstantFromNode(MaskNode)) {
      DecodeVPPERMMask(C, Mask);
      break;
    }
    return false;
  }
  case X86ISD::VPERMV: {
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    IsUnary = true;
    // Unlike most shuffle nodes, VPERMV's mask operand is operand 0.
    Ops.push_back(N->getOperand(1));
    SDValue MaskNode = N->getOperand(0);
    SmallVector<uint64_t, 32> RawMask;
    unsigned MaskEltSize = VT.getScalarSizeInBits();
    if (getTargetShuffleMaskIndices(MaskNode, MaskEltSize, RawMask)) {
      DecodeVPERMVMask(RawMask, Mask);
      break;
    }
    if (auto *C = getTargetConstantFromNode(MaskNode)) {
      DecodeVPERMVMask(C, MaskEltSize, Mask);
      break;
    }
    return false;
  }
  case X86ISD::VPERMV3: {
    assert(N->getOperand(0).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(2).getValueType() == VT && "Unexpected value type");
    IsUnary = IsFakeUnary = N->getOperand(0) == N->getOperand(2);
    // Unlike most shuffle nodes, VPERMV3's mask operand is the middle one.
    Ops.push_back(N->getOperand(0));
    Ops.push_back(N->getOperand(2));
    SDValue MaskNode = N->getOperand(1);
    unsigned MaskEltSize = VT.getScalarSizeInBits();
    if (auto *C = getTargetConstantFromNode(MaskNode)) {
      DecodeVPERMV3Mask(C, MaskEltSize, Mask);
      break;
    }
    return false;
  }
  case X86ISD::VPERMIV3: {
    assert(N->getOperand(1).getValueType() == VT && "Unexpected value type");
    assert(N->getOperand(2).getValueType() == VT && "Unexpected value type");
    IsUnary = IsFakeUnary = N->getOperand(1) == N->getOperand(2);
    // Unlike most shuffle nodes, VPERMIV3's mask operand is the first one.
    Ops.push_back(N->getOperand(1));
    Ops.push_back(N->getOperand(2));
    SDValue MaskNode = N->getOperand(0);
    unsigned MaskEltSize = VT.getScalarSizeInBits();
    if (auto *C = getTargetConstantFromNode(MaskNode)) {
      DecodeVPERMV3Mask(C, MaskEltSize, Mask);
      break;
    }
    return false;
  }
  default: llvm_unreachable("unknown target shuffle node");
  }

  // Empty mask indicates the decode failed.
  if (Mask.empty())
    return false;

  // Check if we're getting a shuffle mask with zero'd elements.
  if (!AllowSentinelZero)
    if (any_of(Mask, [](int M) { return M == SM_SentinelZero; }))
      return false;

  // If we have a fake unary shuffle, the shuffle mask is spread across two
  // inputs that are actually the same node. Re-map the mask to always point
  // into the first input.
  if (IsFakeUnary)
    for (int &M : Mask)
      if (M >= (int)Mask.size())
        M -= Mask.size();

  // If we didn't already add operands in the opcode-specific code, default to
  // adding 1 or 2 operands starting at 0.
  if (Ops.empty()) {
    Ops.push_back(N->getOperand(0));
    if (!IsUnary || IsFakeUnary)
      Ops.push_back(N->getOperand(1));
  }

  return true;
}

/// Check a target shuffle mask's inputs to see if we can set any values to
/// SM_SentinelZero - this is for elements that are known to be zero
/// (not just zeroable) from their inputs.
/// Returns true if the target shuffle mask was decoded.
static bool setTargetShuffleZeroElements(SDValue N,
                                         SmallVectorImpl<int> &Mask,
                                         SmallVectorImpl<SDValue> &Ops) {
  bool IsUnary;
  if (!isTargetShuffle(N.getOpcode()))
    return false;

  MVT VT = N.getSimpleValueType();
  if (!getTargetShuffleMask(N.getNode(), VT, true, Ops, Mask, IsUnary))
    return false;

  SDValue V1 = Ops[0];
  SDValue V2 = IsUnary ? V1 : Ops[1];

  V1 = peekThroughBitcasts(V1);
  V2 = peekThroughBitcasts(V2);

  assert((VT.getSizeInBits() % Mask.size()) == 0 &&
         "Illegal split of shuffle value type");
  unsigned EltSizeInBits = VT.getSizeInBits() / Mask.size();

  // Extract known constant input data.
  APInt UndefSrcElts[2];
  SmallVector<APInt, 32> SrcEltBits[2];
  bool IsSrcConstant[2] = {
      getTargetConstantBitsFromNode(V1, EltSizeInBits, UndefSrcElts[0],
                                    SrcEltBits[0], true, false),
      getTargetConstantBitsFromNode(V2, EltSizeInBits, UndefSrcElts[1],
                                    SrcEltBits[1], true, false)};

  for (int i = 0, Size = Mask.size(); i < Size; ++i) {
    int M = Mask[i];

    // Already decoded as SM_SentinelZero / SM_SentinelUndef.
    if (M < 0)
      continue;

    // Determine shuffle input and normalize the mask.
    unsigned SrcIdx = M / Size;
    SDValue V = M < Size ? V1 : V2;
    M %= Size;

    // We are referencing an UNDEF input.
    if (V.isUndef()) {
      Mask[i] = SM_SentinelUndef;
      continue;
    }

    // SCALAR_TO_VECTOR - only the first element is defined, and the rest UNDEF.
    // TODO: We currently only set UNDEF for integer types - floats use the same
    // registers as vectors and many of the scalar folded loads rely on the
    // SCALAR_TO_VECTOR pattern.
    if (V.getOpcode() == ISD::SCALAR_TO_VECTOR &&
        (Size % V.getValueType().getVectorNumElements()) == 0) {
      int Scale = Size / V.getValueType().getVectorNumElements();
      int Idx = M / Scale;
      if (Idx != 0 && !VT.isFloatingPoint())
        Mask[i] = SM_SentinelUndef;
      else if (Idx == 0 && X86::isZeroNode(V.getOperand(0)))
        Mask[i] = SM_SentinelZero;
      continue;
    }

    // Attempt to extract from the source's constant bits.
    if (IsSrcConstant[SrcIdx]) {
      if (UndefSrcElts[SrcIdx][M])
        Mask[i] = SM_SentinelUndef;
      else if (SrcEltBits[SrcIdx][M] == 0)
        Mask[i] = SM_SentinelZero;
    }
  }

  assert(VT.getVectorNumElements() == Mask.size() &&
         "Different mask size from vector size!");
  return true;
}

// Attempt to decode ops that could be represented as a shuffle mask.
// The decoded shuffle mask may contain a different number of elements to the
// destination value type.
static bool getFauxShuffleMask(SDValue N, SmallVectorImpl<int> &Mask,
                               SmallVectorImpl<SDValue> &Ops,
                               SelectionDAG &DAG) {
  Mask.clear();
  Ops.clear();

  MVT VT = N.getSimpleValueType();
  unsigned NumElts = VT.getVectorNumElements();
  unsigned NumSizeInBits = VT.getSizeInBits();
  unsigned NumBitsPerElt = VT.getScalarSizeInBits();
  assert((NumBitsPerElt % 8) == 0 && (NumSizeInBits % 8) == 0 &&
         "Expected byte aligned value types");

  unsigned Opcode = N.getOpcode();
  switch (Opcode) {
  case ISD::AND:
  case X86ISD::ANDNP: {
    // Attempt to decode as a per-byte mask.
    APInt UndefElts;
    SmallVector<APInt, 32> EltBits;
    SDValue N0 = N.getOperand(0);
    SDValue N1 = N.getOperand(1);
    bool IsAndN = (X86ISD::ANDNP == Opcode);
    uint64_t ZeroMask = IsAndN ? 255 : 0;
    if (!getTargetConstantBitsFromNode(IsAndN ? N0 : N1, 8, UndefElts, EltBits))
      return false;
    for (int i = 0, e = (int)EltBits.size(); i != e; ++i) {
      if (UndefElts[i]) {
        Mask.push_back(SM_SentinelUndef);
        continue;
      }
      uint64_t ByteBits = EltBits[i].getZExtValue();
      if (ByteBits != 0 && ByteBits != 255)
        return false;
      Mask.push_back(ByteBits == ZeroMask ? SM_SentinelZero : i);
    }
    Ops.push_back(IsAndN ? N1 : N0);
    return true;
  }
  case ISD::SCALAR_TO_VECTOR: {
    // Match against a scalar_to_vector of an extract from a vector,
    // for PEXTRW/PEXTRB we must handle the implicit zext of the scalar.
    SDValue N0 = N.getOperand(0);
    SDValue SrcExtract;

    if ((N0.getOpcode() == ISD::EXTRACT_VECTOR_ELT &&
         N0.getOperand(0).getValueType() == VT) ||
        (N0.getOpcode() == X86ISD::PEXTRW &&
         N0.getOperand(0).getValueType() == MVT::v8i16) ||
        (N0.getOpcode() == X86ISD::PEXTRB &&
         N0.getOperand(0).getValueType() == MVT::v16i8)) {
      SrcExtract = N0;
    }

    if (!SrcExtract || !isa<ConstantSDNode>(SrcExtract.getOperand(1)))
      return false;

    SDValue SrcVec = SrcExtract.getOperand(0);
    EVT SrcVT = SrcVec.getValueType();
    unsigned NumSrcElts = SrcVT.getVectorNumElements();
    unsigned NumZeros = (NumBitsPerElt / SrcVT.getScalarSizeInBits()) - 1;

    unsigned SrcIdx = SrcExtract.getConstantOperandVal(1);
    if (NumSrcElts <= SrcIdx)
      return false;

    Ops.push_back(SrcVec);
    Mask.push_back(SrcIdx);
    Mask.append(NumZeros, SM_SentinelZero);
    Mask.append(NumSrcElts - Mask.size(), SM_SentinelUndef);
    return true;
  }
  case X86ISD::PINSRB:
  case X86ISD::PINSRW: {
    SDValue InVec = N.getOperand(0);
    SDValue InScl = N.getOperand(1);
    uint64_t InIdx = N.getConstantOperandVal(2);
    assert(InIdx < NumElts && "Illegal insertion index");

    // Attempt to recognise a PINSR*(VEC, 0, Idx) shuffle pattern.
    if (X86::isZeroNode(InScl)) {
      Ops.push_back(InVec);
      for (unsigned i = 0; i != NumElts; ++i)
        Mask.push_back(i == InIdx ? SM_SentinelZero : (int)i);
      return true;
    }

    // Attempt to recognise a PINSR*(PEXTR*) shuffle pattern.
    // TODO: Expand this to support INSERT_VECTOR_ELT/etc.
    unsigned ExOp =
        (X86ISD::PINSRB == Opcode ? X86ISD::PEXTRB : X86ISD::PEXTRW);
    if (InScl.getOpcode() != ExOp)
      return false;

    SDValue ExVec = InScl.getOperand(0);
    uint64_t ExIdx = InScl.getConstantOperandVal(1);
    assert(ExIdx < NumElts && "Illegal extraction index");
    Ops.push_back(InVec);
    Ops.push_back(ExVec);
    for (unsigned i = 0; i != NumElts; ++i)
      Mask.push_back(i == InIdx ? NumElts + ExIdx : i);
    return true;
  }
  case X86ISD::PACKSS:
  case X86ISD::PACKUS: {
    SDValue N0 = N.getOperand(0);
    SDValue N1 = N.getOperand(1);
    assert(N0.getValueType().getVectorNumElements() == (NumElts / 2) &&
           N1.getValueType().getVectorNumElements() == (NumElts / 2) &&
           "Unexpected input value type");

    // If we know input saturation won't happen we can treat this
    // as a truncation shuffle.
    if (Opcode == X86ISD::PACKSS) {
      if ((!N0.isUndef() && DAG.ComputeNumSignBits(N0) <= NumBitsPerElt) ||
          (!N1.isUndef() && DAG.ComputeNumSignBits(N1) <= NumBitsPerElt))
        return false;
    } else {
      APInt ZeroMask = APInt::getHighBitsSet(2 * NumBitsPerElt, NumBitsPerElt);
      if ((!N0.isUndef() && !DAG.MaskedValueIsZero(N0, ZeroMask)) ||
          (!N1.isUndef() && !DAG.MaskedValueIsZero(N1, ZeroMask)))
        return false;
    }

    bool IsUnary = (N0 == N1);

    Ops.push_back(N0);
    if (!IsUnary)
      Ops.push_back(N1);

    createPackShuffleMask(VT, Mask, IsUnary);
    return true;
  }
  case X86ISD::VSHLI:
  case X86ISD::VSRLI: {
    uint64_t ShiftVal = N.getConstantOperandVal(1);
    // Out of range bit shifts are guaranteed to be zero.
    if (NumBitsPerElt <= ShiftVal) {
      Mask.append(NumElts, SM_SentinelZero);
      return true;
    }

    // We can only decode 'whole byte' bit shifts as shuffles.
    if ((ShiftVal % 8) != 0)
      break;

    uint64_t ByteShift = ShiftVal / 8;
    unsigned NumBytes = NumSizeInBits / 8;
    unsigned NumBytesPerElt = NumBitsPerElt / 8;
    Ops.push_back(N.getOperand(0));

    // Clear mask to all zeros and insert the shifted byte indices.
    Mask.append(NumBytes, SM_SentinelZero);

    if (X86ISD::VSHLI == Opcode) {
      for (unsigned i = 0; i != NumBytes; i += NumBytesPerElt)
        for (unsigned j = ByteShift; j != NumBytesPerElt; ++j)
          Mask[i + j] = i + j - ByteShift;
    } else {
      for (unsigned i = 0; i != NumBytes; i += NumBytesPerElt)
        for (unsigned j = ByteShift; j != NumBytesPerElt; ++j)
          Mask[i + j - ByteShift] = i + j;
    }
    return true;
  }
  case ISD::ZERO_EXTEND_VECTOR_INREG:
  case X86ISD::VZEXT: {
    // TODO - add support for VPMOVZX with smaller input vector types.
    SDValue Src = N.getOperand(0);
    MVT SrcVT = Src.getSimpleValueType();
    if (NumSizeInBits != SrcVT.getSizeInBits())
      break;
    DecodeZeroExtendMask(SrcVT.getScalarType(), VT, Mask);
    Ops.push_back(Src);
    return true;
  }
  }

  return false;
}

/// Removes unused shuffle source inputs and adjusts the shuffle mask accordingly.
static void resolveTargetShuffleInputsAndMask(SmallVectorImpl<SDValue> &Inputs,
                                              SmallVectorImpl<int> &Mask) {
  int MaskWidth = Mask.size();
  SmallVector<SDValue, 16> UsedInputs;
  for (int i = 0, e = Inputs.size(); i < e; ++i) {
    int lo = UsedInputs.size() * MaskWidth;
    int hi = lo + MaskWidth;

    // Strip UNDEF input usage.
    if (Inputs[i].isUndef())
      for (int &M : Mask)
        if ((lo <= M) && (M < hi))
          M = SM_SentinelUndef;

    // Check for unused inputs.
    if (any_of(Mask, [lo, hi](int i) { return (lo <= i) && (i < hi); })) {
      UsedInputs.push_back(Inputs[i]);
      continue;
    }
    for (int &M : Mask)
      if (lo <= M)
        M -= MaskWidth;
  }
  Inputs = UsedInputs;
}

/// Calls setTargetShuffleZeroElements to resolve a target shuffle mask's inputs
/// and set the SM_SentinelUndef and SM_SentinelZero values. Then check the
/// remaining input indices in case we now have a unary shuffle and adjust the
/// inputs accordingly.
/// Returns true if the target shuffle mask was decoded.
static bool resolveTargetShuffleInputs(SDValue Op,
                                       SmallVectorImpl<SDValue> &Inputs,
                                       SmallVectorImpl<int> &Mask,
                                       SelectionDAG &DAG) {
  if (!setTargetShuffleZeroElements(Op, Mask, Inputs))
    if (!getFauxShuffleMask(Op, Mask, Inputs, DAG))
      return false;

  resolveTargetShuffleInputsAndMask(Inputs, Mask);
  return true;
}

/// Returns the scalar element that will make up the ith
/// element of the result of the vector shuffle.
static SDValue getShuffleScalarElt(SDNode *N, unsigned Index, SelectionDAG &DAG,
                                   unsigned Depth) {
  if (Depth == 6)
    return SDValue();  // Limit search depth.

  SDValue V = SDValue(N, 0);
  EVT VT = V.getValueType();
  unsigned Opcode = V.getOpcode();

  // Recurse into ISD::VECTOR_SHUFFLE node to find scalars.
  if (const ShuffleVectorSDNode *SV = dyn_cast<ShuffleVectorSDNode>(N)) {
    int Elt = SV->getMaskElt(Index);

    if (Elt < 0)
      return DAG.getUNDEF(VT.getVectorElementType());

    unsigned NumElems = VT.getVectorNumElements();
    SDValue NewV = (Elt < (int)NumElems) ? SV->getOperand(0)
                                         : SV->getOperand(1);
    return getShuffleScalarElt(NewV.getNode(), Elt % NumElems, DAG, Depth+1);
  }

  // Recurse into target specific vector shuffles to find scalars.
  if (isTargetShuffle(Opcode)) {
    MVT ShufVT = V.getSimpleValueType();
    MVT ShufSVT = ShufVT.getVectorElementType();
    int NumElems = (int)ShufVT.getVectorNumElements();
    SmallVector<int, 16> ShuffleMask;
    SmallVector<SDValue, 16> ShuffleOps;
    bool IsUnary;

    if (!getTargetShuffleMask(N, ShufVT, true, ShuffleOps, ShuffleMask, IsUnary))
      return SDValue();

    int Elt = ShuffleMask[Index];
    if (Elt == SM_SentinelZero)
      return ShufSVT.isInteger() ? DAG.getConstant(0, SDLoc(N), ShufSVT)
                                 : DAG.getConstantFP(+0.0, SDLoc(N), ShufSVT);
    if (Elt == SM_SentinelUndef)
      return DAG.getUNDEF(ShufSVT);

    assert(0 <= Elt && Elt < (2*NumElems) && "Shuffle index out of range");
    SDValue NewV = (Elt < NumElems) ? ShuffleOps[0] : ShuffleOps[1];
    return getShuffleScalarElt(NewV.getNode(), Elt % NumElems, DAG,
                               Depth+1);
  }

  // Actual nodes that may contain scalar elements
  if (Opcode == ISD::BITCAST) {
    V = V.getOperand(0);
    EVT SrcVT = V.getValueType();
    unsigned NumElems = VT.getVectorNumElements();

    if (!SrcVT.isVector() || SrcVT.getVectorNumElements() != NumElems)
      return SDValue();
  }

  if (V.getOpcode() == ISD::SCALAR_TO_VECTOR)
    return (Index == 0) ? V.getOperand(0)
                        : DAG.getUNDEF(VT.getVectorElementType());

  if (V.getOpcode() == ISD::BUILD_VECTOR)
    return V.getOperand(Index);

  return SDValue();
}

// Use PINSRB/PINSRW/PINSRD to create a build vector.
static SDValue LowerBuildVectorAsInsert(SDValue Op, unsigned NonZeros,
                                        unsigned NumNonZero, unsigned NumZero,
                                        SelectionDAG &DAG,
                                        const X86Subtarget &Subtarget) {
  MVT VT = Op.getSimpleValueType();
  unsigned NumElts = VT.getVectorNumElements();
  assert(((VT == MVT::v8i16 && Subtarget.hasSSE2()) ||
          ((VT == MVT::v16i8 || VT == MVT::v4i32) && Subtarget.hasSSE41())) &&
         "Illegal vector insertion");

  SDLoc dl(Op);
  SDValue V;
  bool First = true;

  for (unsigned i = 0; i < NumElts; ++i) {
    bool IsNonZero = (NonZeros & (1 << i)) != 0;
    if (!IsNonZero)
      continue;

    // If the build vector contains zeros or our first insertion is not the
    // first index then insert into zero vector to break any register
    // dependency else use SCALAR_TO_VECTOR/VZEXT_MOVL.
    if (First) {
      First = false;
      if (NumZero || 0 != i)
        V = getZeroVector(VT, Subtarget, DAG, dl);
      else {
        assert(0 == i && "Expected insertion into zero-index");
        V = DAG.getAnyExtOrTrunc(Op.getOperand(i), dl, MVT::i32);
        V = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, MVT::v4i32, V);
        V = DAG.getNode(X86ISD::VZEXT_MOVL, dl, MVT::v4i32, V);
        V = DAG.getBitcast(VT, V);
        continue;
      }
    }
    V = DAG.getNode(ISD::INSERT_VECTOR_ELT, dl, VT, V, Op.getOperand(i),
                    DAG.getIntPtrConstant(i, dl));
  }

  return V;
}

/// Custom lower build_vector of v16i8.
static SDValue LowerBuildVectorv16i8(SDValue Op, unsigned NonZeros,
                                     unsigned NumNonZero, unsigned NumZero,
                                     SelectionDAG &DAG,
                                     const X86Subtarget &Subtarget) {
  if (NumNonZero > 8 && !Subtarget.hasSSE41())
    return SDValue();

  // SSE4.1 - use PINSRB to insert each byte directly.
  if (Subtarget.hasSSE41())
    return LowerBuildVectorAsInsert(Op, NonZeros, NumNonZero, NumZero, DAG,
                                    Subtarget);

  SDLoc dl(Op);
  SDValue V;
  bool First = true;

  // Pre-SSE4.1 - merge byte pairs and insert with PINSRW.
  for (unsigned i = 0; i < 16; ++i) {
    bool ThisIsNonZero = (NonZeros & (1 << i)) != 0;
    if (ThisIsNonZero && First) {
      if (NumZero)
        V = getZeroVector(MVT::v8i16, Subtarget, DAG, dl);
      else
        V = DAG.getUNDEF(MVT::v8i16);
      First = false;
    }

    if ((i & 1) != 0) {
      // FIXME: Investigate extending to i32 instead of just i16.
      // FIXME: Investigate combining the first 4 bytes as a i32 instead.
      SDValue ThisElt, LastElt;
      bool LastIsNonZero = (NonZeros & (1 << (i - 1))) != 0;
      if (LastIsNonZero) {
        LastElt =
            DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::i16, Op.getOperand(i - 1));
      }
      if (ThisIsNonZero) {
        ThisElt = DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::i16, Op.getOperand(i));
        ThisElt = DAG.getNode(ISD::SHL, dl, MVT::i16, ThisElt,
                              DAG.getConstant(8, dl, MVT::i8));
        if (LastIsNonZero)
          ThisElt = DAG.getNode(ISD::OR, dl, MVT::i16, ThisElt, LastElt);
      } else
        ThisElt = LastElt;

      if (ThisElt) {
        if (1 == i) {
          V = NumZero ? DAG.getZExtOrTrunc(ThisElt, dl, MVT::i32)
                      : DAG.getAnyExtOrTrunc(ThisElt, dl, MVT::i32);
          V = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, MVT::v4i32, V);
          V = DAG.getNode(X86ISD::VZEXT_MOVL, dl, MVT::v4i32, V);
          V = DAG.getBitcast(MVT::v8i16, V);
        } else {
          V = DAG.getNode(ISD::INSERT_VECTOR_ELT, dl, MVT::v8i16, V, ThisElt,
                          DAG.getIntPtrConstant(i / 2, dl));
        }
      }
    }
  }

  return DAG.getBitcast(MVT::v16i8, V);
}

/// Custom lower build_vector of v8i16.
static SDValue LowerBuildVectorv8i16(SDValue Op, unsigned NonZeros,
                                     unsigned NumNonZero, unsigned NumZero,
                                     SelectionDAG &DAG,
                                     const X86Subtarget &Subtarget) {
  if (NumNonZero > 4 && !Subtarget.hasSSE41())
    return SDValue();

  // Use PINSRW to insert each byte directly.
  return LowerBuildVectorAsInsert(Op, NonZeros, NumNonZero, NumZero, DAG,
                                  Subtarget);
}

/// Custom lower build_vector of v4i32 or v4f32.
static SDValue LowerBuildVectorv4x32(SDValue Op, SelectionDAG &DAG,
                                     const X86Subtarget &Subtarget) {
  // Find all zeroable elements.
  std::bitset<4> Zeroable;
  for (int i=0; i < 4; ++i) {
    SDValue Elt = Op->getOperand(i);
    Zeroable[i] = (Elt.isUndef() || X86::isZeroNode(Elt));
  }
  assert(Zeroable.size() - Zeroable.count() > 1 &&
         "We expect at least two non-zero elements!");

  // We only know how to deal with build_vector nodes where elements are either
  // zeroable or extract_vector_elt with constant index.
  SDValue FirstNonZero;
  unsigned FirstNonZeroIdx;
  for (unsigned i=0; i < 4; ++i) {
    if (Zeroable[i])
      continue;
    SDValue Elt = Op->getOperand(i);
    if (Elt.getOpcode() != ISD::EXTRACT_VECTOR_ELT ||
        !isa<ConstantSDNode>(Elt.getOperand(1)))
      return SDValue();
    // Make sure that this node is extracting from a 128-bit vector.
    MVT VT = Elt.getOperand(0).getSimpleValueType();
    if (!VT.is128BitVector())
      return SDValue();
    if (!FirstNonZero.getNode()) {
      FirstNonZero = Elt;
      FirstNonZeroIdx = i;
    }
  }

  assert(FirstNonZero.getNode() && "Unexpected build vector of all zeros!");
  SDValue V1 = FirstNonZero.getOperand(0);
  MVT VT = V1.getSimpleValueType();

  // See if this build_vector can be lowered as a blend with zero.
  SDValue Elt;
  unsigned EltMaskIdx, EltIdx;
  int Mask[4];
  for (EltIdx = 0; EltIdx < 4; ++EltIdx) {
    if (Zeroable[EltIdx]) {
      // The zero vector will be on the right hand side.
      Mask[EltIdx] = EltIdx+4;
      continue;
    }

    Elt = Op->getOperand(EltIdx);
    // By construction, Elt is a EXTRACT_VECTOR_ELT with constant index.
    EltMaskIdx = Elt.getConstantOperandVal(1);
    if (Elt.getOperand(0) != V1 || EltMaskIdx != EltIdx)
      break;
    Mask[EltIdx] = EltIdx;
  }

  if (EltIdx == 4) {
    // Let the shuffle legalizer deal with blend operations.
    SDValue VZero = getZeroVector(VT, Subtarget, DAG, SDLoc(Op));
    if (V1.getSimpleValueType() != VT)
      V1 = DAG.getBitcast(VT, V1);
    return DAG.getVectorShuffle(VT, SDLoc(V1), V1, VZero, Mask);
  }

  // See if we can lower this build_vector to a INSERTPS.
  if (!Subtarget.hasSSE41())
    return SDValue();

  SDValue V2 = Elt.getOperand(0);
  if (Elt == FirstNonZero && EltIdx == FirstNonZeroIdx)
    V1 = SDValue();

  bool CanFold = true;
  for (unsigned i = EltIdx + 1; i < 4 && CanFold; ++i) {
    if (Zeroable[i])
      continue;

    SDValue Current = Op->getOperand(i);
    SDValue SrcVector = Current->getOperand(0);
    if (!V1.getNode())
      V1 = SrcVector;
    CanFold = (SrcVector == V1) && (Current.getConstantOperandVal(1) == i);
  }

  if (!CanFold)
    return SDValue();

  assert(V1.getNode() && "Expected at least two non-zero elements!");
  if (V1.getSimpleValueType() != MVT::v4f32)
    V1 = DAG.getBitcast(MVT::v4f32, V1);
  if (V2.getSimpleValueType() != MVT::v4f32)
    V2 = DAG.getBitcast(MVT::v4f32, V2);

  // Ok, we can emit an INSERTPS instruction.
  unsigned ZMask = Zeroable.to_ulong();

  unsigned InsertPSMask = EltMaskIdx << 6 | EltIdx << 4 | ZMask;
  assert((InsertPSMask & ~0xFFu) == 0 && "Invalid mask!");
  SDLoc DL(Op);
  SDValue Result = DAG.getNode(X86ISD::INSERTPS, DL, MVT::v4f32, V1, V2,
                               DAG.getIntPtrConstant(InsertPSMask, DL));
  return DAG.getBitcast(VT, Result);
}

/// Return a vector logical shift node.
static SDValue getVShift(bool isLeft, EVT VT, SDValue SrcOp, unsigned NumBits,
                         SelectionDAG &DAG, const TargetLowering &TLI,
                         const SDLoc &dl) {
  assert(VT.is128BitVector() && "Unknown type for VShift");
  MVT ShVT = MVT::v16i8;
  unsigned Opc = isLeft ? X86ISD::VSHLDQ : X86ISD::VSRLDQ;
  SrcOp = DAG.getBitcast(ShVT, SrcOp);
  MVT ScalarShiftTy = TLI.getScalarShiftAmountTy(DAG.getDataLayout(), VT);
  assert(NumBits % 8 == 0 && "Only support byte sized shifts");
  SDValue ShiftVal = DAG.getConstant(NumBits/8, dl, ScalarShiftTy);
  return DAG.getBitcast(VT, DAG.getNode(Opc, dl, ShVT, SrcOp, ShiftVal));
}

static SDValue LowerAsSplatVectorLoad(SDValue SrcOp, MVT VT, const SDLoc &dl,
                                      SelectionDAG &DAG) {

  // Check if the scalar load can be widened into a vector load. And if
  // the address is "base + cst" see if the cst can be "absorbed" into
  // the shuffle mask.
  if (LoadSDNode *LD = dyn_cast<LoadSDNode>(SrcOp)) {
    SDValue Ptr = LD->getBasePtr();
    if (!ISD::isNormalLoad(LD) || LD->isVolatile())
      return SDValue();
    EVT PVT = LD->getValueType(0);
    if (PVT != MVT::i32 && PVT != MVT::f32)
      return SDValue();

    int FI = -1;
    int64_t Offset = 0;
    if (FrameIndexSDNode *FINode = dyn_cast<FrameIndexSDNode>(Ptr)) {
      FI = FINode->getIndex();
      Offset = 0;
    } else if (DAG.isBaseWithConstantOffset(Ptr) &&
               isa<FrameIndexSDNode>(Ptr.getOperand(0))) {
      FI = cast<FrameIndexSDNode>(Ptr.getOperand(0))->getIndex();
      Offset = Ptr.getConstantOperandVal(1);
      Ptr = Ptr.getOperand(0);
    } else {
      return SDValue();
    }

    // FIXME: 256-bit vector instructions don't require a strict alignment,
    // improve this code to support it better.
    unsigned RequiredAlign = VT.getSizeInBits()/8;
    SDValue Chain = LD->getChain();
    // Make sure the stack object alignment is at least 16 or 32.
    MachineFrameInfo &MFI = DAG.getMachineFunction().getFrameInfo();
    if (DAG.InferPtrAlignment(Ptr) < RequiredAlign) {
      if (MFI.isFixedObjectIndex(FI)) {
        // Can't change the alignment. FIXME: It's possible to compute
        // the exact stack offset and reference FI + adjust offset instead.
        // If someone *really* cares about this. That's the way to implement it.
        return SDValue();
      } else {
        MFI.setObjectAlignment(FI, RequiredAlign);
      }
    }

    // (Offset % 16 or 32) must be multiple of 4. Then address is then
    // Ptr + (Offset & ~15).
    if (Offset < 0)
      return SDValue();
    if ((Offset % RequiredAlign) & 3)
      return SDValue();
    int64_t StartOffset = Offset & ~int64_t(RequiredAlign - 1);
    if (StartOffset) {
      SDLoc DL(Ptr);
      Ptr = DAG.getNode(ISD::ADD, DL, Ptr.getValueType(), Ptr,
                        DAG.getConstant(StartOffset, DL, Ptr.getValueType()));
    }

    int EltNo = (Offset - StartOffset) >> 2;
    unsigned NumElems = VT.getVectorNumElements();

    EVT NVT = EVT::getVectorVT(*DAG.getContext(), PVT, NumElems);
    SDValue V1 = DAG.getLoad(NVT, dl, Chain, Ptr,
                             LD->getPointerInfo().getWithOffset(StartOffset));

    SmallVector<int, 8> Mask(NumElems, EltNo);

    return DAG.getVectorShuffle(NVT, dl, V1, DAG.getUNDEF(NVT), Mask);
  }

  return SDValue();
}

/// Given the initializing elements 'Elts' of a vector of type 'VT', see if the
/// elements can be replaced by a single large load which has the same value as
/// a build_vector or insert_subvector whose loaded operands are 'Elts'.
///
/// Example: <load i32 *a, load i32 *a+4, zero, undef> -> zextload a
static SDValue EltsFromConsecutiveLoads(EVT VT, ArrayRef<SDValue> Elts,
                                        const SDLoc &DL, SelectionDAG &DAG,
                                        const X86Subtarget &Subtarget,
                                        bool isAfterLegalize) {
  unsigned NumElems = Elts.size();

  int LastLoadedElt = -1;
  SmallBitVector LoadMask(NumElems, false);
  SmallBitVector ZeroMask(NumElems, false);
  SmallBitVector UndefMask(NumElems, false);

  // For each element in the initializer, see if we've found a load, zero or an
  // undef.
  for (unsigned i = 0; i < NumElems; ++i) {
    SDValue Elt = peekThroughBitcasts(Elts[i]);
    if (!Elt.getNode())
      return SDValue();

    if (Elt.isUndef())
      UndefMask[i] = true;
    else if (X86::isZeroNode(Elt) || ISD::isBuildVectorAllZeros(Elt.getNode()))
      ZeroMask[i] = true;
    else if (ISD::isNON_EXTLoad(Elt.getNode())) {
      LoadMask[i] = true;
      LastLoadedElt = i;
      // Each loaded element must be the correct fractional portion of the
      // requested vector load.
      if ((NumElems * Elt.getValueSizeInBits()) != VT.getSizeInBits())
        return SDValue();
    } else
      return SDValue();
  }
  assert((ZeroMask | UndefMask | LoadMask).count() == NumElems &&
         "Incomplete element masks");

  // Handle Special Cases - all undef or undef/zero.
  if (UndefMask.count() == NumElems)
    return DAG.getUNDEF(VT);

  // FIXME: Should we return this as a BUILD_VECTOR instead?
  if ((ZeroMask | UndefMask).count() == NumElems)
    return VT.isInteger() ? DAG.getConstant(0, DL, VT)
                          : DAG.getConstantFP(0.0, DL, VT);

  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  int FirstLoadedElt = LoadMask.find_first();
  SDValue EltBase = peekThroughBitcasts(Elts[FirstLoadedElt]);
  LoadSDNode *LDBase = cast<LoadSDNode>(EltBase);
  EVT LDBaseVT = EltBase.getValueType();

  // Consecutive loads can contain UNDEFS but not ZERO elements.
  // Consecutive loads with UNDEFs and ZEROs elements require a
  // an additional shuffle stage to clear the ZERO elements.
  bool IsConsecutiveLoad = true;
  bool IsConsecutiveLoadWithZeros = true;
  for (int i = FirstLoadedElt + 1; i <= LastLoadedElt; ++i) {
    if (LoadMask[i]) {
      SDValue Elt = peekThroughBitcasts(Elts[i]);
      LoadSDNode *LD = cast<LoadSDNode>(Elt);
      if (!DAG.areNonVolatileConsecutiveLoads(
              LD, LDBase, Elt.getValueType().getStoreSizeInBits() / 8,
              i - FirstLoadedElt)) {
        IsConsecutiveLoad = false;
        IsConsecutiveLoadWithZeros = false;
        break;
      }
    } else if (ZeroMask[i]) {
      IsConsecutiveLoad = false;
    }
  }

  SmallVector<LoadSDNode *, 8> Loads;
  for (int i = FirstLoadedElt; i <= LastLoadedElt; ++i)
    if (LoadMask[i])
      Loads.push_back(cast<LoadSDNode>(peekThroughBitcasts(Elts[i])));

  auto CreateLoad = [&DAG, &DL, &Loads](EVT VT, LoadSDNode *LDBase) {
    auto MMOFlags = LDBase->getMemOperand()->getFlags();
    assert(!(MMOFlags & MachineMemOperand::MOVolatile) &&
           "Cannot merge volatile loads.");
    SDValue NewLd =
        DAG.getLoad(VT, DL, LDBase->getChain(), LDBase->getBasePtr(),
                    LDBase->getPointerInfo(), LDBase->getAlignment(), MMOFlags);
    for (auto *LD : Loads)
      DAG.makeEquivalentMemoryOrdering(LD, NewLd);
    return NewLd;
  };

  // LOAD - all consecutive load/undefs (must start/end with a load).
  // If we have found an entire vector of loads and undefs, then return a large
  // load of the entire vector width starting at the base pointer.
  // If the vector contains zeros, then attempt to shuffle those elements.
  if (FirstLoadedElt == 0 && LastLoadedElt == (int)(NumElems - 1) &&
      (IsConsecutiveLoad || IsConsecutiveLoadWithZeros)) {
    assert(LDBase && "Did not find base load for merging consecutive loads");
    EVT EltVT = LDBase->getValueType(0);
    // Ensure that the input vector size for the merged loads matches the
    // cumulative size of the input elements.
    if (VT.getSizeInBits() != EltVT.getSizeInBits() * NumElems)
      return SDValue();

    if (isAfterLegalize && !TLI.isOperationLegal(ISD::LOAD, VT))
      return SDValue();

    // Don't create 256-bit non-temporal aligned loads without AVX2 as these
    // will lower to regular temporal loads and use the cache.
    if (LDBase->isNonTemporal() && LDBase->getAlignment() >= 32 &&
        VT.is256BitVector() && !Subtarget.hasInt256())
      return SDValue();

    if (IsConsecutiveLoad)
      return CreateLoad(VT, LDBase);

    // IsConsecutiveLoadWithZeros - we need to create a shuffle of the loaded
    // vector and a zero vector to clear out the zero elements.
    if (!isAfterLegalize && NumElems == VT.getVectorNumElements()) {
      SmallVector<int, 4> ClearMask(NumElems, -1);
      for (unsigned i = 0; i < NumElems; ++i) {
        if (ZeroMask[i])
          ClearMask[i] = i + NumElems;
        else if (LoadMask[i])
          ClearMask[i] = i;
      }
      SDValue V = CreateLoad(VT, LDBase);
      SDValue Z = VT.isInteger() ? DAG.getConstant(0, DL, VT)
                                 : DAG.getConstantFP(0.0, DL, VT);
      return DAG.getVectorShuffle(VT, DL, V, Z, ClearMask);
    }
  }

  int LoadSize =
      (1 + LastLoadedElt - FirstLoadedElt) * LDBaseVT.getStoreSizeInBits();

  // VZEXT_LOAD - consecutive 32/64-bit load/undefs followed by zeros/undefs.
  if (IsConsecutiveLoad && FirstLoadedElt == 0 &&
      (LoadSize == 32 || LoadSize == 64) &&
      ((VT.is128BitVector() || VT.is256BitVector() || VT.is512BitVector()))) {
    MVT VecSVT = VT.isFloatingPoint() ? MVT::getFloatingPointVT(LoadSize)
                                      : MVT::getIntegerVT(LoadSize);
    MVT VecVT = MVT::getVectorVT(VecSVT, VT.getSizeInBits() / LoadSize);
    if (TLI.isTypeLegal(VecVT)) {
      SDVTList Tys = DAG.getVTList(VecVT, MVT::Other);
      SDValue Ops[] = { LDBase->getChain(), LDBase->getBasePtr() };
      SDValue ResNode =
          DAG.getMemIntrinsicNode(X86ISD::VZEXT_LOAD, DL, Tys, Ops, VecSVT,
                                  LDBase->getPointerInfo(),
                                  LDBase->getAlignment(),
                                  false/*isVolatile*/, true/*ReadMem*/,
                                  false/*WriteMem*/);
      for (auto *LD : Loads)
        DAG.makeEquivalentMemoryOrdering(LD, ResNode);
      return DAG.getBitcast(VT, ResNode);
    }
  }

  return SDValue();
}

static Constant *getConstantVector(MVT VT, const APInt &SplatValue,
                                   unsigned SplatBitSize, LLVMContext &C) {
  unsigned ScalarSize = VT.getScalarSizeInBits();
  unsigned NumElm = SplatBitSize / ScalarSize;

  SmallVector<Constant *, 32> ConstantVec;
  for (unsigned i = 0; i < NumElm; i++) {
    APInt Val = SplatValue.extractBits(ScalarSize, ScalarSize * i);
    Constant *Const;
    if (VT.isFloatingPoint()) {
      if (ScalarSize == 32) {
        Const = ConstantFP::get(C, APFloat(APFloat::IEEEsingle(), Val));
      } else {
        assert(ScalarSize == 64 && "Unsupported floating point scalar size");
        Const = ConstantFP::get(C, APFloat(APFloat::IEEEdouble(), Val));
      }
    } else
      Const = Constant::getIntegerValue(Type::getIntNTy(C, ScalarSize), Val);
    ConstantVec.push_back(Const);
  }
  return ConstantVector::get(ArrayRef<Constant *>(ConstantVec));
}

static bool isUseOfShuffle(SDNode *N) {
  for (auto *U : N->uses()) {
    if (isTargetShuffle(U->getOpcode()))
      return true;
    if (U->getOpcode() == ISD::BITCAST) // Ignore bitcasts
      return isUseOfShuffle(U);
  }
  return false;
}

// Check if the current node of build vector is a zero extended vector.
// // If so, return the value extended.
// // For example: (0,0,0,a,0,0,0,a,0,0,0,a,0,0,0,a) returns a.
// // NumElt - return the number of zero extended identical values.
// // EltType - return the type of the value include the zero extend.
static SDValue isSplatZeroExtended(const BuildVectorSDNode *Op,
                                   unsigned &NumElt, MVT &EltType) {
  SDValue ExtValue = Op->getOperand(0);
  unsigned NumElts = Op->getNumOperands();
  unsigned Delta = NumElts;

  for (unsigned i = 1; i < NumElts; i++) {
    if (Op->getOperand(i) == ExtValue) {
      Delta = i;
      break;
    }
    if (!(Op->getOperand(i).isUndef() || isNullConstant(Op->getOperand(i))))
      return SDValue();
  }
  if (!isPowerOf2_32(Delta) || Delta == 1)
    return SDValue();

  for (unsigned i = Delta; i < NumElts; i++) {
    if (i % Delta == 0) {
      if (Op->getOperand(i) != ExtValue)
        return SDValue();
    } else if (!(isNullConstant(Op->getOperand(i)) ||
                 Op->getOperand(i).isUndef()))
      return SDValue();
  }
  unsigned EltSize = Op->getSimpleValueType(0).getScalarSizeInBits();
  unsigned ExtVTSize = EltSize * Delta;
  EltType = MVT::getIntegerVT(ExtVTSize);
  NumElt = NumElts / Delta;
  return ExtValue;
}

/// Attempt to use the vbroadcast instruction to generate a splat value
/// from a splat BUILD_VECTOR which uses:
///  a. A single scalar load, or a constant.
///  b. Repeated pattern of constants (e.g. <0,1,0,1> or <0,1,2,3,0,1,2,3>).
///
/// The VBROADCAST node is returned when a pattern is found,
/// or SDValue() otherwise.
static SDValue lowerBuildVectorAsBroadcast(BuildVectorSDNode *BVOp,
                                           const X86Subtarget &Subtarget,
                                           SelectionDAG &DAG) {
  // VBROADCAST requires AVX.
  // TODO: Splats could be generated for non-AVX CPUs using SSE
  // instructions, but there's less potential gain for only 128-bit vectors.
  if (!Subtarget.hasAVX())
    return SDValue();

  MVT VT = BVOp->getSimpleValueType(0);
  SDLoc dl(BVOp);

  assert((VT.is128BitVector() || VT.is256BitVector() || VT.is512BitVector()) &&
         "Unsupported vector type for broadcast.");

  BitVector UndefElements;
  SDValue Ld = BVOp->getSplatValue(&UndefElements);

  // Attempt to use VBROADCASTM
  // From this paterrn:
  // a. t0 = (zext_i64 (bitcast_i8 v2i1 X))
  // b. t1 = (build_vector t0 t0)
  //
  // Create (VBROADCASTM v2i1 X)
  if (Subtarget.hasCDI() && (VT.is512BitVector() || Subtarget.hasVLX())) {
    MVT EltType = VT.getScalarType();
    unsigned NumElts = VT.getVectorNumElements();
    SDValue BOperand;
    SDValue ZeroExtended = isSplatZeroExtended(BVOp, NumElts, EltType);
    if ((ZeroExtended && ZeroExtended.getOpcode() == ISD::BITCAST) ||
        (Ld && Ld.getOpcode() == ISD::ZERO_EXTEND &&
         Ld.getOperand(0).getOpcode() == ISD::BITCAST)) {
      if (ZeroExtended)
        BOperand = ZeroExtended.getOperand(0);
      else
        BOperand = Ld.getOperand(0).getOperand(0);
      if (BOperand.getValueType().isVector() &&
          BOperand.getSimpleValueType().getVectorElementType() == MVT::i1) {
        if ((EltType == MVT::i64 && (VT.getVectorElementType() == MVT::i8 ||
                                     NumElts == 8)) || // for broadcastmb2q
            (EltType == MVT::i32 && (VT.getVectorElementType() == MVT::i16 ||
                                     NumElts == 16))) { // for broadcastmw2d
          SDValue Brdcst =
              DAG.getNode(X86ISD::VBROADCASTM, dl,
                          MVT::getVectorVT(EltType, NumElts), BOperand);
          return DAG.getBitcast(VT, Brdcst);
        }
      }
    }
  }

  // We need a splat of a single value to use broadcast, and it doesn't
  // make any sense if the value is only in one element of the vector.
  if (!Ld || (VT.getVectorNumElements() - UndefElements.count()) <= 1) {
    APInt SplatValue, Undef;
    unsigned SplatBitSize;
    bool HasUndef;
    // Check if this is a repeated constant pattern suitable for broadcasting.
    if (BVOp->isConstantSplat(SplatValue, Undef, SplatBitSize, HasUndef) &&
        SplatBitSize > VT.getScalarSizeInBits() &&
        SplatBitSize < VT.getSizeInBits()) {
      // Avoid replacing with broadcast when it's a use of a shuffle
      // instruction to preserve the present custom lowering of shuffles.
      if (isUseOfShuffle(BVOp) || BVOp->hasOneUse())
        return SDValue();
      // replace BUILD_VECTOR with broadcast of the repeated constants.
      const TargetLowering &TLI = DAG.getTargetLoweringInfo();
      LLVMContext *Ctx = DAG.getContext();
      MVT PVT = TLI.getPointerTy(DAG.getDataLayout());
      if (Subtarget.hasAVX()) {
        if (SplatBitSize <= 64 && Subtarget.hasAVX2() &&
            !(SplatBitSize == 64 && Subtarget.is32Bit())) {
          // Splatted value can fit in one INTEGER constant in constant pool.
          // Load the constant and broadcast it.
          MVT CVT = MVT::getIntegerVT(SplatBitSize);
          Type *ScalarTy = Type::getIntNTy(*Ctx, SplatBitSize);
          Constant *C = Constant::getIntegerValue(ScalarTy, SplatValue);
          SDValue CP = DAG.getConstantPool(C, PVT);
          unsigned Repeat = VT.getSizeInBits() / SplatBitSize;

          unsigned Alignment = cast<ConstantPoolSDNode>(CP)->getAlignment();
          Ld = DAG.getLoad(
              CVT, dl, DAG.getEntryNode(), CP,
              MachinePointerInfo::getConstantPool(DAG.getMachineFunction()),
              Alignment);
          SDValue Brdcst = DAG.getNode(X86ISD::VBROADCAST, dl,
                                       MVT::getVectorVT(CVT, Repeat), Ld);
          return DAG.getBitcast(VT, Brdcst);
        } else if (SplatBitSize == 32 || SplatBitSize == 64) {
          // Splatted value can fit in one FLOAT constant in constant pool.
          // Load the constant and broadcast it.
          // AVX have support for 32 and 64 bit broadcast for floats only.
          // No 64bit integer in 32bit subtarget.
          MVT CVT = MVT::getFloatingPointVT(SplatBitSize);
          // Lower the splat via APFloat directly, to avoid any conversion.
          Constant *C =
              SplatBitSize == 32
                  ? ConstantFP::get(*Ctx,
                                    APFloat(APFloat::IEEEsingle(), SplatValue))
                  : ConstantFP::get(*Ctx,
                                    APFloat(APFloat::IEEEdouble(), SplatValue));
          SDValue CP = DAG.getConstantPool(C, PVT);
          unsigned Repeat = VT.getSizeInBits() / SplatBitSize;

          unsigned Alignment = cast<ConstantPoolSDNode>(CP)->getAlignment();
          Ld = DAG.getLoad(
              CVT, dl, DAG.getEntryNode(), CP,
              MachinePointerInfo::getConstantPool(DAG.getMachineFunction()),
              Alignment);
          SDValue Brdcst = DAG.getNode(X86ISD::VBROADCAST, dl,
                                       MVT::getVectorVT(CVT, Repeat), Ld);
          return DAG.getBitcast(VT, Brdcst);
        } else if (SplatBitSize > 64) {
          // Load the vector of constants and broadcast it.
          MVT CVT = VT.getScalarType();
          Constant *VecC = getConstantVector(VT, SplatValue, SplatBitSize,
                                             *Ctx);
          SDValue VCP = DAG.getConstantPool(VecC, PVT);
          unsigned NumElm = SplatBitSize / VT.getScalarSizeInBits();
          unsigned Alignment = cast<ConstantPoolSDNode>(VCP)->getAlignment();
          Ld = DAG.getLoad(
              MVT::getVectorVT(CVT, NumElm), dl, DAG.getEntryNode(), VCP,
              MachinePointerInfo::getConstantPool(DAG.getMachineFunction()),
              Alignment);
          SDValue Brdcst = DAG.getNode(X86ISD::SUBV_BROADCAST, dl, VT, Ld);
          return DAG.getBitcast(VT, Brdcst);
        }
      }
    }
    return SDValue();
  }

  bool ConstSplatVal =
      (Ld.getOpcode() == ISD::Constant || Ld.getOpcode() == ISD::ConstantFP);

  // Make sure that all of the users of a non-constant load are from the
  // BUILD_VECTOR node.
  if (!ConstSplatVal && !BVOp->isOnlyUserOf(Ld.getNode()))
    return SDValue();

  unsigned ScalarSize = Ld.getValueSizeInBits();
  bool IsGE256 = (VT.getSizeInBits() >= 256);

  // When optimizing for size, generate up to 5 extra bytes for a broadcast
  // instruction to save 8 or more bytes of constant pool data.
  // TODO: If multiple splats are generated to load the same constant,
  // it may be detrimental to overall size. There needs to be a way to detect
  // that condition to know if this is truly a size win.
  bool OptForSize = DAG.getMachineFunction().getFunction()->optForSize();

  // Handle broadcasting a single constant scalar from the constant pool
  // into a vector.
  // On Sandybridge (no AVX2), it is still better to load a constant vector
  // from the constant pool and not to broadcast it from a scalar.
  // But override that restriction when optimizing for size.
  // TODO: Check if splatting is recommended for other AVX-capable CPUs.
  if (ConstSplatVal && (Subtarget.hasAVX2() || OptForSize)) {
    EVT CVT = Ld.getValueType();
    assert(!CVT.isVector() && "Must not broadcast a vector type");

    // Splat f32, i32, v4f64, v4i64 in all cases with AVX2.
    // For size optimization, also splat v2f64 and v2i64, and for size opt
    // with AVX2, also splat i8 and i16.
    // With pattern matching, the VBROADCAST node may become a VMOVDDUP.
    if (ScalarSize == 32 || (IsGE256 && ScalarSize == 64) ||
        (OptForSize && (ScalarSize == 64 || Subtarget.hasAVX2()))) {
      const Constant *C = nullptr;
      if (ConstantSDNode *CI = dyn_cast<ConstantSDNode>(Ld))
        C = CI->getConstantIntValue();
      else if (ConstantFPSDNode *CF = dyn_cast<ConstantFPSDNode>(Ld))
        C = CF->getConstantFPValue();

      assert(C && "Invalid constant type");

      const TargetLowering &TLI = DAG.getTargetLoweringInfo();
      SDValue CP =
          DAG.getConstantPool(C, TLI.getPointerTy(DAG.getDataLayout()));
      unsigned Alignment = cast<ConstantPoolSDNode>(CP)->getAlignment();
      Ld = DAG.getLoad(
          CVT, dl, DAG.getEntryNode(), CP,
          MachinePointerInfo::getConstantPool(DAG.getMachineFunction()),
          Alignment);

      return DAG.getNode(X86ISD::VBROADCAST, dl, VT, Ld);
    }
  }

  bool IsLoad = ISD::isNormalLoad(Ld.getNode());

  // Handle AVX2 in-register broadcasts.
  if (!IsLoad && Subtarget.hasInt256() &&
      (ScalarSize == 32 || (IsGE256 && ScalarSize == 64)))
    return DAG.getNode(X86ISD::VBROADCAST, dl, VT, Ld);

  // The scalar source must be a normal load.
  if (!IsLoad)
    return SDValue();

  if (ScalarSize == 32 || (IsGE256 && ScalarSize == 64) ||
      (Subtarget.hasVLX() && ScalarSize == 64))
    return DAG.getNode(X86ISD::VBROADCAST, dl, VT, Ld);

  // The integer check is needed for the 64-bit into 128-bit so it doesn't match
  // double since there is no vbroadcastsd xmm
  if (Subtarget.hasInt256() && Ld.getValueType().isInteger()) {
    if (ScalarSize == 8 || ScalarSize == 16 || ScalarSize == 64)
      return DAG.getNode(X86ISD::VBROADCAST, dl, VT, Ld);
  }

  // Unsupported broadcast.
  return SDValue();
}

/// \brief For an EXTRACT_VECTOR_ELT with a constant index return the real
/// underlying vector and index.
///
/// Modifies \p ExtractedFromVec to the real vector and returns the real
/// index.
static int getUnderlyingExtractedFromVec(SDValue &ExtractedFromVec,
                                         SDValue ExtIdx) {
  int Idx = cast<ConstantSDNode>(ExtIdx)->getZExtValue();
  if (!isa<ShuffleVectorSDNode>(ExtractedFromVec))
    return Idx;

  // For 256-bit vectors, LowerEXTRACT_VECTOR_ELT_SSE4 may have already
  // lowered this:
  //   (extract_vector_elt (v8f32 %vreg1), Constant<6>)
  // to:
  //   (extract_vector_elt (vector_shuffle<2,u,u,u>
  //                           (extract_subvector (v8f32 %vreg0), Constant<4>),
  //                           undef)
  //                       Constant<0>)
  // In this case the vector is the extract_subvector expression and the index
  // is 2, as specified by the shuffle.
  ShuffleVectorSDNode *SVOp = cast<ShuffleVectorSDNode>(ExtractedFromVec);
  SDValue ShuffleVec = SVOp->getOperand(0);
  MVT ShuffleVecVT = ShuffleVec.getSimpleValueType();
  assert(ShuffleVecVT.getVectorElementType() ==
         ExtractedFromVec.getSimpleValueType().getVectorElementType());

  int ShuffleIdx = SVOp->getMaskElt(Idx);
  if (isUndefOrInRange(ShuffleIdx, 0, ShuffleVecVT.getVectorNumElements())) {
    ExtractedFromVec = ShuffleVec;
    return ShuffleIdx;
  }
  return Idx;
}

static SDValue buildFromShuffleMostly(SDValue Op, SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();

  // Skip if insert_vec_elt is not supported.
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  if (!TLI.isOperationLegalOrCustom(ISD::INSERT_VECTOR_ELT, VT))
    return SDValue();

  SDLoc DL(Op);
  unsigned NumElems = Op.getNumOperands();

  SDValue VecIn1;
  SDValue VecIn2;
  SmallVector<unsigned, 4> InsertIndices;
  SmallVector<int, 8> Mask(NumElems, -1);

  for (unsigned i = 0; i != NumElems; ++i) {
    unsigned Opc = Op.getOperand(i).getOpcode();

    if (Opc == ISD::UNDEF)
      continue;

    if (Opc != ISD::EXTRACT_VECTOR_ELT) {
      // Quit if more than 1 elements need inserting.
      if (InsertIndices.size() > 1)
        return SDValue();

      InsertIndices.push_back(i);
      continue;
    }

    SDValue ExtractedFromVec = Op.getOperand(i).getOperand(0);
    SDValue ExtIdx = Op.getOperand(i).getOperand(1);

    // Quit if non-constant index.
    if (!isa<ConstantSDNode>(ExtIdx))
      return SDValue();
    int Idx = getUnderlyingExtractedFromVec(ExtractedFromVec, ExtIdx);

    // Quit if extracted from vector of different type.
    if (ExtractedFromVec.getValueType() != VT)
      return SDValue();

    if (!VecIn1.getNode())
      VecIn1 = ExtractedFromVec;
    else if (VecIn1 != ExtractedFromVec) {
      if (!VecIn2.getNode())
        VecIn2 = ExtractedFromVec;
      else if (VecIn2 != ExtractedFromVec)
        // Quit if more than 2 vectors to shuffle
        return SDValue();
    }

    if (ExtractedFromVec == VecIn1)
      Mask[i] = Idx;
    else if (ExtractedFromVec == VecIn2)
      Mask[i] = Idx + NumElems;
  }

  if (!VecIn1.getNode())
    return SDValue();

  VecIn2 = VecIn2.getNode() ? VecIn2 : DAG.getUNDEF(VT);
  SDValue NV = DAG.getVectorShuffle(VT, DL, VecIn1, VecIn2, Mask);

  for (unsigned Idx : InsertIndices)
    NV = DAG.getNode(ISD::INSERT_VECTOR_ELT, DL, VT, NV, Op.getOperand(Idx),
                     DAG.getIntPtrConstant(Idx, DL));

  return NV;
}

static SDValue ConvertI1VectorToInteger(SDValue Op, SelectionDAG &DAG) {
  assert(ISD::isBuildVectorOfConstantSDNodes(Op.getNode()) &&
         Op.getScalarValueSizeInBits() == 1 &&
         "Can not convert non-constant vector");
  uint64_t Immediate = 0;
  for (unsigned idx = 0, e = Op.getNumOperands(); idx < e; ++idx) {
    SDValue In = Op.getOperand(idx);
    if (!In.isUndef())
      Immediate |= (cast<ConstantSDNode>(In)->getZExtValue() & 0x1) << idx;
  }
  SDLoc dl(Op);
  MVT VT = MVT::getIntegerVT(std::max((int)Op.getValueSizeInBits(), 8));
  return DAG.getConstant(Immediate, dl, VT);
}
// Lower BUILD_VECTOR operation for v8i1 and v16i1 types.
SDValue
X86TargetLowering::LowerBUILD_VECTORvXi1(SDValue Op, SelectionDAG &DAG) const {

  MVT VT = Op.getSimpleValueType();
  assert((VT.getVectorElementType() == MVT::i1) &&
         "Unexpected type in LowerBUILD_VECTORvXi1!");

  SDLoc dl(Op);
  if (ISD::isBuildVectorAllZeros(Op.getNode()))
    return DAG.getTargetConstant(0, dl, VT);

  if (ISD::isBuildVectorAllOnes(Op.getNode()))
    return DAG.getTargetConstant(1, dl, VT);

  if (ISD::isBuildVectorOfConstantSDNodes(Op.getNode())) {
    if (VT == MVT::v64i1 && !Subtarget.is64Bit()) {
      // Split the pieces.
      SDValue Lower =
          DAG.getBuildVector(MVT::v32i1, dl, Op.getNode()->ops().slice(0, 32));
      SDValue Upper =
          DAG.getBuildVector(MVT::v32i1, dl, Op.getNode()->ops().slice(32, 32));
      // We have to manually lower both halves so getNode doesn't try to
      // reassemble the build_vector.
      Lower = LowerBUILD_VECTORvXi1(Lower, DAG);
      Upper = LowerBUILD_VECTORvXi1(Upper, DAG);
      return DAG.getNode(ISD::CONCAT_VECTORS, dl, MVT::v64i1, Lower, Upper);
    }
    SDValue Imm = ConvertI1VectorToInteger(Op, DAG);
    if (Imm.getValueSizeInBits() == VT.getSizeInBits())
      return DAG.getBitcast(VT, Imm);
    SDValue ExtVec = DAG.getBitcast(MVT::v8i1, Imm);
    return DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl, VT, ExtVec,
                        DAG.getIntPtrConstant(0, dl));
  }

  // Vector has one or more non-const elements
  uint64_t Immediate = 0;
  SmallVector<unsigned, 16> NonConstIdx;
  bool IsSplat = true;
  bool HasConstElts = false;
  int SplatIdx = -1;
  for (unsigned idx = 0, e = Op.getNumOperands(); idx < e; ++idx) {
    SDValue In = Op.getOperand(idx);
    if (In.isUndef())
      continue;
    if (!isa<ConstantSDNode>(In))
      NonConstIdx.push_back(idx);
    else {
      Immediate |= (cast<ConstantSDNode>(In)->getZExtValue() & 0x1) << idx;
      HasConstElts = true;
    }
    if (SplatIdx < 0)
      SplatIdx = idx;
    else if (In != Op.getOperand(SplatIdx))
      IsSplat = false;
  }

  // for splat use " (select i1 splat_elt, all-ones, all-zeroes)"
  if (IsSplat)
    return DAG.getSelect(dl, VT, Op.getOperand(SplatIdx),
                         DAG.getConstant(1, dl, VT),
                         DAG.getConstant(0, dl, VT));

  // insert elements one by one
  SDValue DstVec;
  SDValue Imm;
  if (Immediate) {
    MVT ImmVT = MVT::getIntegerVT(std::max((int)VT.getSizeInBits(), 8));
    Imm = DAG.getConstant(Immediate, dl, ImmVT);
  }
  else if (HasConstElts)
    Imm = DAG.getConstant(0, dl, VT);
  else
    Imm = DAG.getUNDEF(VT);
  if (Imm.getValueSizeInBits() == VT.getSizeInBits())
    DstVec = DAG.getBitcast(VT, Imm);
  else {
    SDValue ExtVec = DAG.getBitcast(MVT::v8i1, Imm);
    DstVec = DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl, VT, ExtVec,
                         DAG.getIntPtrConstant(0, dl));
  }

  for (unsigned i = 0, e = NonConstIdx.size(); i != e; ++i) {
    unsigned InsertIdx = NonConstIdx[i];
    DstVec = DAG.getNode(ISD::INSERT_VECTOR_ELT, dl, VT, DstVec,
                         Op.getOperand(InsertIdx),
                         DAG.getIntPtrConstant(InsertIdx, dl));
  }
  return DstVec;
}

/// \brief Return true if \p N implements a horizontal binop and return the
/// operands for the horizontal binop into V0 and V1.
///
/// This is a helper function of LowerToHorizontalOp().
/// This function checks that the build_vector \p N in input implements a
/// horizontal operation. Parameter \p Opcode defines the kind of horizontal
/// operation to match.
/// For example, if \p Opcode is equal to ISD::ADD, then this function
/// checks if \p N implements a horizontal arithmetic add; if instead \p Opcode
/// is equal to ISD::SUB, then this function checks if this is a horizontal
/// arithmetic sub.
///
/// This function only analyzes elements of \p N whose indices are
/// in range [BaseIdx, LastIdx).
static bool isHorizontalBinOp(const BuildVectorSDNode *N, unsigned Opcode,
                              SelectionDAG &DAG,
                              unsigned BaseIdx, unsigned LastIdx,
                              SDValue &V0, SDValue &V1) {
  EVT VT = N->getValueType(0);

  assert(BaseIdx * 2 <= LastIdx && "Invalid Indices in input!");
  assert(VT.isVector() && VT.getVectorNumElements() >= LastIdx &&
         "Invalid Vector in input!");

  bool IsCommutable = (Opcode == ISD::ADD || Opcode == ISD::FADD);
  bool CanFold = true;
  unsigned ExpectedVExtractIdx = BaseIdx;
  unsigned NumElts = LastIdx - BaseIdx;
  V0 = DAG.getUNDEF(VT);
  V1 = DAG.getUNDEF(VT);

  // Check if N implements a horizontal binop.
  for (unsigned i = 0, e = NumElts; i != e && CanFold; ++i) {
    SDValue Op = N->getOperand(i + BaseIdx);

    // Skip UNDEFs.
    if (Op->isUndef()) {
      // Update the expected vector extract index.
      if (i * 2 == NumElts)
        ExpectedVExtractIdx = BaseIdx;
      ExpectedVExtractIdx += 2;
      continue;
    }

    CanFold = Op->getOpcode() == Opcode && Op->hasOneUse();

    if (!CanFold)
      break;

    SDValue Op0 = Op.getOperand(0);
    SDValue Op1 = Op.getOperand(1);

    // Try to match the following pattern:
    // (BINOP (extract_vector_elt A, I), (extract_vector_elt A, I+1))
    CanFold = (Op0.getOpcode() == ISD::EXTRACT_VECTOR_ELT &&
        Op1.getOpcode() == ISD::EXTRACT_VECTOR_ELT &&
        Op0.getOperand(0) == Op1.getOperand(0) &&
        isa<ConstantSDNode>(Op0.getOperand(1)) &&
        isa<ConstantSDNode>(Op1.getOperand(1)));
    if (!CanFold)
      break;

    unsigned I0 = cast<ConstantSDNode>(Op0.getOperand(1))->getZExtValue();
    unsigned I1 = cast<ConstantSDNode>(Op1.getOperand(1))->getZExtValue();

    if (i * 2 < NumElts) {
      if (V0.isUndef()) {
        V0 = Op0.getOperand(0);
        if (V0.getValueType() != VT)
          return false;
      }
    } else {
      if (V1.isUndef()) {
        V1 = Op0.getOperand(0);
        if (V1.getValueType() != VT)
          return false;
      }
      if (i * 2 == NumElts)
        ExpectedVExtractIdx = BaseIdx;
    }

    SDValue Expected = (i * 2 < NumElts) ? V0 : V1;
    if (I0 == ExpectedVExtractIdx)
      CanFold = I1 == I0 + 1 && Op0.getOperand(0) == Expected;
    else if (IsCommutable && I1 == ExpectedVExtractIdx) {
      // Try to match the following dag sequence:
      // (BINOP (extract_vector_elt A, I+1), (extract_vector_elt A, I))
      CanFold = I0 == I1 + 1 && Op1.getOperand(0) == Expected;
    } else
      CanFold = false;

    ExpectedVExtractIdx += 2;
  }

  return CanFold;
}

/// \brief Emit a sequence of two 128-bit horizontal add/sub followed by
/// a concat_vector.
///
/// This is a helper function of LowerToHorizontalOp().
/// This function expects two 256-bit vectors called V0 and V1.
/// At first, each vector is split into two separate 128-bit vectors.
/// Then, the resulting 128-bit vectors are used to implement two
/// horizontal binary operations.
///
/// The kind of horizontal binary operation is defined by \p X86Opcode.
///
/// \p Mode specifies how the 128-bit parts of V0 and V1 are passed in input to
/// the two new horizontal binop.
/// When Mode is set, the first horizontal binop dag node would take as input
/// the lower 128-bit of V0 and the upper 128-bit of V0. The second
/// horizontal binop dag node would take as input the lower 128-bit of V1
/// and the upper 128-bit of V1.
///   Example:
///     HADD V0_LO, V0_HI
///     HADD V1_LO, V1_HI
///
/// Otherwise, the first horizontal binop dag node takes as input the lower
/// 128-bit of V0 and the lower 128-bit of V1, and the second horizontal binop
/// dag node takes the upper 128-bit of V0 and the upper 128-bit of V1.
///   Example:
///     HADD V0_LO, V1_LO
///     HADD V0_HI, V1_HI
///
/// If \p isUndefLO is set, then the algorithm propagates UNDEF to the lower
/// 128-bits of the result. If \p isUndefHI is set, then UNDEF is propagated to
/// the upper 128-bits of the result.
static SDValue ExpandHorizontalBinOp(const SDValue &V0, const SDValue &V1,
                                     const SDLoc &DL, SelectionDAG &DAG,
                                     unsigned X86Opcode, bool Mode,
                                     bool isUndefLO, bool isUndefHI) {
  MVT VT = V0.getSimpleValueType();
  assert(VT.is256BitVector() && VT == V1.getSimpleValueType() &&
         "Invalid nodes in input!");

  unsigned NumElts = VT.getVectorNumElements();
  SDValue V0_LO = extract128BitVector(V0, 0, DAG, DL);
  SDValue V0_HI = extract128BitVector(V0, NumElts/2, DAG, DL);
  SDValue V1_LO = extract128BitVector(V1, 0, DAG, DL);
  SDValue V1_HI = extract128BitVector(V1, NumElts/2, DAG, DL);
  MVT NewVT = V0_LO.getSimpleValueType();

  SDValue LO = DAG.getUNDEF(NewVT);
  SDValue HI = DAG.getUNDEF(NewVT);

  if (Mode) {
    // Don't emit a horizontal binop if the result is expected to be UNDEF.
    if (!isUndefLO && !V0->isUndef())
      LO = DAG.getNode(X86Opcode, DL, NewVT, V0_LO, V0_HI);
    if (!isUndefHI && !V1->isUndef())
      HI = DAG.getNode(X86Opcode, DL, NewVT, V1_LO, V1_HI);
  } else {
    // Don't emit a horizontal binop if the result is expected to be UNDEF.
    if (!isUndefLO && (!V0_LO->isUndef() || !V1_LO->isUndef()))
      LO = DAG.getNode(X86Opcode, DL, NewVT, V0_LO, V1_LO);

    if (!isUndefHI && (!V0_HI->isUndef() || !V1_HI->isUndef()))
      HI = DAG.getNode(X86Opcode, DL, NewVT, V0_HI, V1_HI);
  }

  return DAG.getNode(ISD::CONCAT_VECTORS, DL, VT, LO, HI);
}

/// Returns true iff \p BV builds a vector with the result equivalent to
/// the result of ADDSUB operation.
/// If true is returned then the operands of ADDSUB = Opnd0 +- Opnd1 operation
/// are written to the parameters \p Opnd0 and \p Opnd1.
static bool isAddSub(const BuildVectorSDNode *BV,
                     const X86Subtarget &Subtarget, SelectionDAG &DAG,
                     SDValue &Opnd0, SDValue &Opnd1) {

  MVT VT = BV->getSimpleValueType(0);
  if ((!Subtarget.hasSSE3() || (VT != MVT::v4f32 && VT != MVT::v2f64)) &&
      (!Subtarget.hasAVX() || (VT != MVT::v8f32 && VT != MVT::v4f64)) &&
      (!Subtarget.hasAVX512() || (VT != MVT::v16f32 && VT != MVT::v8f64)))
    return false;

  unsigned NumElts = VT.getVectorNumElements();
  SDValue InVec0 = DAG.getUNDEF(VT);
  SDValue InVec1 = DAG.getUNDEF(VT);

  // Odd-numbered elements in the input build vector are obtained from
  // adding two integer/float elements.
  // Even-numbered elements in the input build vector are obtained from
  // subtracting two integer/float elements.
  unsigned ExpectedOpcode = ISD::FSUB;
  unsigned NextExpectedOpcode = ISD::FADD;
  bool AddFound = false;
  bool SubFound = false;

  for (unsigned i = 0, e = NumElts; i != e; ++i) {
    SDValue Op = BV->getOperand(i);

    // Skip 'undef' values.
    unsigned Opcode = Op.getOpcode();
    if (Opcode == ISD::UNDEF) {
      std::swap(ExpectedOpcode, NextExpectedOpcode);
      continue;
    }

    // Early exit if we found an unexpected opcode.
    if (Opcode != ExpectedOpcode)
      return false;

    SDValue Op0 = Op.getOperand(0);
    SDValue Op1 = Op.getOperand(1);

    // Try to match the following pattern:
    // (BINOP (extract_vector_elt A, i), (extract_vector_elt B, i))
    // Early exit if we cannot match that sequence.
    if (Op0.getOpcode() != ISD::EXTRACT_VECTOR_ELT ||
        Op1.getOpcode() != ISD::EXTRACT_VECTOR_ELT ||
        !isa<ConstantSDNode>(Op0.getOperand(1)) ||
        !isa<ConstantSDNode>(Op1.getOperand(1)) ||
        Op0.getOperand(1) != Op1.getOperand(1))
      return false;

    unsigned I0 = cast<ConstantSDNode>(Op0.getOperand(1))->getZExtValue();
    if (I0 != i)
      return false;

    // We found a valid add/sub node. Update the information accordingly.
    if (i & 1)
      AddFound = true;
    else
      SubFound = true;

    // Update InVec0 and InVec1.
    if (InVec0.isUndef()) {
      InVec0 = Op0.getOperand(0);
      if (InVec0.getSimpleValueType() != VT)
        return false;
    }
    if (InVec1.isUndef()) {
      InVec1 = Op1.getOperand(0);
      if (InVec1.getSimpleValueType() != VT)
        return false;
    }

    // Make sure that operands in input to each add/sub node always
    // come from a same pair of vectors.
    if (InVec0 != Op0.getOperand(0)) {
      if (ExpectedOpcode == ISD::FSUB)
        return false;

      // FADD is commutable. Try to commute the operands
      // and then test again.
      std::swap(Op0, Op1);
      if (InVec0 != Op0.getOperand(0))
        return false;
    }

    if (InVec1 != Op1.getOperand(0))
      return false;

    // Update the pair of expected opcodes.
    std::swap(ExpectedOpcode, NextExpectedOpcode);
  }

  // Don't try to fold this build_vector into an ADDSUB if the inputs are undef.
  if (!AddFound || !SubFound || InVec0.isUndef() || InVec1.isUndef())
    return false;

  Opnd0 = InVec0;
  Opnd1 = InVec1;
  return true;
}

/// Returns true if is possible to fold MUL and an idiom that has already been
/// recognized as ADDSUB(\p Opnd0, \p Opnd1) into FMADDSUB(x, y, \p Opnd1).
/// If (and only if) true is returned, the operands of FMADDSUB are written to
/// parameters \p Opnd0, \p Opnd1, \p Opnd2.
///
/// Prior to calling this function it should be known that there is some
/// SDNode that potentially can be replaced with an X86ISD::ADDSUB operation
/// using \p Opnd0 and \p Opnd1 as operands. Also, this method is called
/// before replacement of such SDNode with ADDSUB operation. Thus the number
/// of \p Opnd0 uses is expected to be equal to 2.
/// For example, this function may be called for the following IR:
///    %AB = fmul fast <2 x double> %A, %B
///    %Sub = fsub fast <2 x double> %AB, %C
///    %Add = fadd fast <2 x double> %AB, %C
///    %Addsub = shufflevector <2 x double> %Sub, <2 x double> %Add,
///                            <2 x i32> <i32 0, i32 3>
/// There is a def for %Addsub here, which potentially can be replaced by
/// X86ISD::ADDSUB operation:
///    %Addsub = X86ISD::ADDSUB %AB, %C
/// and such ADDSUB can further be replaced with FMADDSUB:
///    %Addsub = FMADDSUB %A, %B, %C.
///
/// The main reason why this method is called before the replacement of the
/// recognized ADDSUB idiom with ADDSUB operation is that such replacement
/// is illegal sometimes. E.g. 512-bit ADDSUB is not available, while 512-bit
/// FMADDSUB is.
static bool isFMAddSub(const X86Subtarget &Subtarget, SelectionDAG &DAG,
                       SDValue &Opnd0, SDValue &Opnd1, SDValue &Opnd2) {
  if (Opnd0.getOpcode() != ISD::FMUL || Opnd0->use_size() != 2 ||
      !Subtarget.hasAnyFMA())
    return false;

  // FIXME: These checks must match the similar ones in
  // DAGCombiner::visitFADDForFMACombine. It would be good to have one
  // function that would answer if it is Ok to fuse MUL + ADD to FMADD
  // or MUL + ADDSUB to FMADDSUB.
  const TargetOptions &Options = DAG.getTarget().Options;
  bool AllowFusion =
      (Options.AllowFPOpFusion == FPOpFusion::Fast || Options.UnsafeFPMath);
  if (!AllowFusion)
    return false;

  Opnd2 = Opnd1;
  Opnd1 = Opnd0.getOperand(1);
  Opnd0 = Opnd0.getOperand(0);

  return true;
}

/// Try to fold a build_vector that performs an 'addsub' or 'fmaddsub' operation
/// accordingly to X86ISD::ADDSUB or X86ISD::FMADDSUB node.
static SDValue lowerToAddSubOrFMAddSub(const BuildVectorSDNode *BV,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  SDValue Opnd0, Opnd1;
  if (!isAddSub(BV, Subtarget, DAG, Opnd0, Opnd1))
    return SDValue();

  MVT VT = BV->getSimpleValueType(0);
  SDLoc DL(BV);

  // Try to generate X86ISD::FMADDSUB node here.
  SDValue Opnd2;
  if (isFMAddSub(Subtarget, DAG, Opnd0, Opnd1, Opnd2))
    return DAG.getNode(X86ISD::FMADDSUB, DL, VT, Opnd0, Opnd1, Opnd2);

  // Do not generate X86ISD::ADDSUB node for 512-bit types even though
  // the ADDSUB idiom has been successfully recognized. There are no known
  // X86 targets with 512-bit ADDSUB instructions!
  // 512-bit ADDSUB idiom recognition was needed only as part of FMADDSUB idiom
  // recognition.
  if (VT.is512BitVector())
    return SDValue();

  return DAG.getNode(X86ISD::ADDSUB, DL, VT, Opnd0, Opnd1);
}

/// Lower BUILD_VECTOR to a horizontal add/sub operation if possible.
static SDValue LowerToHorizontalOp(const BuildVectorSDNode *BV,
                                   const X86Subtarget &Subtarget,
                                   SelectionDAG &DAG) {
  MVT VT = BV->getSimpleValueType(0);
  unsigned NumElts = VT.getVectorNumElements();
  unsigned NumUndefsLO = 0;
  unsigned NumUndefsHI = 0;
  unsigned Half = NumElts/2;

  // Count the number of UNDEF operands in the build_vector in input.
  for (unsigned i = 0, e = Half; i != e; ++i)
    if (BV->getOperand(i)->isUndef())
      NumUndefsLO++;

  for (unsigned i = Half, e = NumElts; i != e; ++i)
    if (BV->getOperand(i)->isUndef())
      NumUndefsHI++;

  // Early exit if this is either a build_vector of all UNDEFs or all the
  // operands but one are UNDEF.
  if (NumUndefsLO + NumUndefsHI + 1 >= NumElts)
    return SDValue();

  SDLoc DL(BV);
  SDValue InVec0, InVec1;
  if ((VT == MVT::v4f32 || VT == MVT::v2f64) && Subtarget.hasSSE3()) {
    // Try to match an SSE3 float HADD/HSUB.
    if (isHorizontalBinOp(BV, ISD::FADD, DAG, 0, NumElts, InVec0, InVec1))
      return DAG.getNode(X86ISD::FHADD, DL, VT, InVec0, InVec1);

    if (isHorizontalBinOp(BV, ISD::FSUB, DAG, 0, NumElts, InVec0, InVec1))
      return DAG.getNode(X86ISD::FHSUB, DL, VT, InVec0, InVec1);
  } else if ((VT == MVT::v4i32 || VT == MVT::v8i16) && Subtarget.hasSSSE3()) {
    // Try to match an SSSE3 integer HADD/HSUB.
    if (isHorizontalBinOp(BV, ISD::ADD, DAG, 0, NumElts, InVec0, InVec1))
      return DAG.getNode(X86ISD::HADD, DL, VT, InVec0, InVec1);

    if (isHorizontalBinOp(BV, ISD::SUB, DAG, 0, NumElts, InVec0, InVec1))
      return DAG.getNode(X86ISD::HSUB, DL, VT, InVec0, InVec1);
  }

  if (!Subtarget.hasAVX())
    return SDValue();

  if ((VT == MVT::v8f32 || VT == MVT::v4f64)) {
    // Try to match an AVX horizontal add/sub of packed single/double
    // precision floating point values from 256-bit vectors.
    SDValue InVec2, InVec3;
    if (isHorizontalBinOp(BV, ISD::FADD, DAG, 0, Half, InVec0, InVec1) &&
        isHorizontalBinOp(BV, ISD::FADD, DAG, Half, NumElts, InVec2, InVec3) &&
        ((InVec0.isUndef() || InVec2.isUndef()) || InVec0 == InVec2) &&
        ((InVec1.isUndef() || InVec3.isUndef()) || InVec1 == InVec3))
      return DAG.getNode(X86ISD::FHADD, DL, VT, InVec0, InVec1);

    if (isHorizontalBinOp(BV, ISD::FSUB, DAG, 0, Half, InVec0, InVec1) &&
        isHorizontalBinOp(BV, ISD::FSUB, DAG, Half, NumElts, InVec2, InVec3) &&
        ((InVec0.isUndef() || InVec2.isUndef()) || InVec0 == InVec2) &&
        ((InVec1.isUndef() || InVec3.isUndef()) || InVec1 == InVec3))
      return DAG.getNode(X86ISD::FHSUB, DL, VT, InVec0, InVec1);
  } else if (VT == MVT::v8i32 || VT == MVT::v16i16) {
    // Try to match an AVX2 horizontal add/sub of signed integers.
    SDValue InVec2, InVec3;
    unsigned X86Opcode;
    bool CanFold = true;

    if (isHorizontalBinOp(BV, ISD::ADD, DAG, 0, Half, InVec0, InVec1) &&
        isHorizontalBinOp(BV, ISD::ADD, DAG, Half, NumElts, InVec2, InVec3) &&
        ((InVec0.isUndef() || InVec2.isUndef()) || InVec0 == InVec2) &&
        ((InVec1.isUndef() || InVec3.isUndef()) || InVec1 == InVec3))
      X86Opcode = X86ISD::HADD;
    else if (isHorizontalBinOp(BV, ISD::SUB, DAG, 0, Half, InVec0, InVec1) &&
        isHorizontalBinOp(BV, ISD::SUB, DAG, Half, NumElts, InVec2, InVec3) &&
        ((InVec0.isUndef() || InVec2.isUndef()) || InVec0 == InVec2) &&
        ((InVec1.isUndef() || InVec3.isUndef()) || InVec1 == InVec3))
      X86Opcode = X86ISD::HSUB;
    else
      CanFold = false;

    if (CanFold) {
      // Fold this build_vector into a single horizontal add/sub.
      // Do this only if the target has AVX2.
      if (Subtarget.hasAVX2())
        return DAG.getNode(X86Opcode, DL, VT, InVec0, InVec1);

      // Do not try to expand this build_vector into a pair of horizontal
      // add/sub if we can emit a pair of scalar add/sub.
      if (NumUndefsLO + 1 == Half || NumUndefsHI + 1 == Half)
        return SDValue();

      // Convert this build_vector into a pair of horizontal binop followed by
      // a concat vector.
      bool isUndefLO = NumUndefsLO == Half;
      bool isUndefHI = NumUndefsHI == Half;
      return ExpandHorizontalBinOp(InVec0, InVec1, DL, DAG, X86Opcode, false,
                                   isUndefLO, isUndefHI);
    }
  }

  if ((VT == MVT::v8f32 || VT == MVT::v4f64 || VT == MVT::v8i32 ||
       VT == MVT::v16i16) && Subtarget.hasAVX()) {
    unsigned X86Opcode;
    if (isHorizontalBinOp(BV, ISD::ADD, DAG, 0, NumElts, InVec0, InVec1))
      X86Opcode = X86ISD::HADD;
    else if (isHorizontalBinOp(BV, ISD::SUB, DAG, 0, NumElts, InVec0, InVec1))
      X86Opcode = X86ISD::HSUB;
    else if (isHorizontalBinOp(BV, ISD::FADD, DAG, 0, NumElts, InVec0, InVec1))
      X86Opcode = X86ISD::FHADD;
    else if (isHorizontalBinOp(BV, ISD::FSUB, DAG, 0, NumElts, InVec0, InVec1))
      X86Opcode = X86ISD::FHSUB;
    else
      return SDValue();

    // Don't try to expand this build_vector into a pair of horizontal add/sub
    // if we can simply emit a pair of scalar add/sub.
    if (NumUndefsLO + 1 == Half || NumUndefsHI + 1 == Half)
      return SDValue();

    // Convert this build_vector into two horizontal add/sub followed by
    // a concat vector.
    bool isUndefLO = NumUndefsLO == Half;
    bool isUndefHI = NumUndefsHI == Half;
    return ExpandHorizontalBinOp(InVec0, InVec1, DL, DAG, X86Opcode, true,
                                 isUndefLO, isUndefHI);
  }

  return SDValue();
}

/// If a BUILD_VECTOR's source elements all apply the same bit operation and
/// one of their operands is constant, lower to a pair of BUILD_VECTOR and
/// just apply the bit to the vectors.
/// NOTE: Its not in our interest to start make a general purpose vectorizer
/// from this, but enough scalar bit operations are created from the later
/// legalization + scalarization stages to need basic support.
static SDValue lowerBuildVectorToBitOp(BuildVectorSDNode *Op,
                                       SelectionDAG &DAG) {
  SDLoc DL(Op);
  MVT VT = Op->getSimpleValueType(0);
  unsigned NumElems = VT.getVectorNumElements();
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();

  // Check that all elements have the same opcode.
  // TODO: Should we allow UNDEFS and if so how many?
  unsigned Opcode = Op->getOperand(0).getOpcode();
  for (unsigned i = 1; i < NumElems; ++i)
    if (Opcode != Op->getOperand(i).getOpcode())
      return SDValue();

  // TODO: We may be able to add support for other Ops (ADD/SUB + shifts).
  switch (Opcode) {
  default:
    return SDValue();
  case ISD::AND:
  case ISD::XOR:
  case ISD::OR:
    if (!TLI.isOperationLegalOrPromote(Opcode, VT))
      return SDValue();
    break;
  }

  SmallVector<SDValue, 4> LHSElts, RHSElts;
  for (SDValue Elt : Op->ops()) {
    SDValue LHS = Elt.getOperand(0);
    SDValue RHS = Elt.getOperand(1);

    // We expect the canonicalized RHS operand to be the constant.
    if (!isa<ConstantSDNode>(RHS))
      return SDValue();
    LHSElts.push_back(LHS);
    RHSElts.push_back(RHS);
  }

  SDValue LHS = DAG.getBuildVector(VT, DL, LHSElts);
  SDValue RHS = DAG.getBuildVector(VT, DL, RHSElts);
  return DAG.getNode(Opcode, DL, VT, LHS, RHS);
}

/// Create a vector constant without a load. SSE/AVX provide the bare minimum
/// functionality to do this, so it's all zeros, all ones, or some derivation
/// that is cheap to calculate.
static SDValue materializeVectorConstant(SDValue Op, SelectionDAG &DAG,
                                         const X86Subtarget &Subtarget) {
  SDLoc DL(Op);
  MVT VT = Op.getSimpleValueType();

  // Vectors containing all zeros can be matched by pxor and xorps.
  if (ISD::isBuildVectorAllZeros(Op.getNode())) {
    // Canonicalize this to <4 x i32> to 1) ensure the zero vectors are CSE'd
    // and 2) ensure that i64 scalars are eliminated on x86-32 hosts.
    if (VT == MVT::v4i32 || VT == MVT::v8i32 || VT == MVT::v16i32)
      return Op;

    return getZeroVector(VT, Subtarget, DAG, DL);
  }

  // Vectors containing all ones can be matched by pcmpeqd on 128-bit width
  // vectors or broken into v4i32 operations on 256-bit vectors. AVX2 can use
  // vpcmpeqd on 256-bit vectors.
  if (Subtarget.hasSSE2() && ISD::isBuildVectorAllOnes(Op.getNode())) {
    if (VT == MVT::v4i32 || VT == MVT::v16i32 ||
        (VT == MVT::v8i32 && Subtarget.hasInt256()))
      return Op;

    return getOnesVector(VT, DAG, DL);
  }

  return SDValue();
}

// Tries to lower a BUILD_VECTOR composed of extract-extract chains that can be
// reasoned to be a permutation of a vector by indices in a non-constant vector.
// (build_vector (extract_elt V, (extract_elt I, 0)),
//               (extract_elt V, (extract_elt I, 1)),
//                    ...
// ->
// (vpermv I, V)
//
// TODO: Handle undefs
// TODO: Utilize pshufb and zero mask blending to support more efficient
// construction of vectors with constant-0 elements.
// TODO: Use smaller-element vectors of same width, and "interpolate" the indices,
// when no native operation available.
static SDValue
LowerBUILD_VECTORAsVariablePermute(SDValue V, SelectionDAG &DAG,
                                   const X86Subtarget &Subtarget) {
  // Look for VPERMV and PSHUFB opportunities.
  MVT VT = V.getSimpleValueType();
  switch (VT.SimpleTy) {
  default:
    return SDValue();
  case MVT::v16i8:
    if (!Subtarget.hasSSE3())
      return SDValue();
    break;
  case MVT::v8f32:
  case MVT::v8i32:
    if (!Subtarget.hasAVX2())
      return SDValue();
    break;
  case MVT::v4i64:
  case MVT::v4f64:
    if (!Subtarget.hasVLX())
      return SDValue();
    break;
  case MVT::v16f32:
  case MVT::v8f64:
  case MVT::v16i32:
  case MVT::v8i64:
    if (!Subtarget.hasAVX512())
      return SDValue();
    break;
  case MVT::v32i16:
    if (!Subtarget.hasBWI())
      return SDValue();
    break;
  case MVT::v8i16:
  case MVT::v16i16:
    if (!Subtarget.hasVLX() || !Subtarget.hasBWI())
      return SDValue();
    break;
  case MVT::v64i8:
    if (!Subtarget.hasVBMI())
      return SDValue();
    break;
  case MVT::v32i8:
    if (!Subtarget.hasVLX() || !Subtarget.hasVBMI())
      return SDValue();
    break;
  }
  SDValue SrcVec, IndicesVec;
  // Check for a match of the permute source vector and permute index elements.
  // This is done by checking that the i-th build_vector operand is of the form:
  // (extract_elt SrcVec, (extract_elt IndicesVec, i)).
  for (unsigned Idx = 0, E = V.getNumOperands(); Idx != E; ++Idx) {
    SDValue Op = V.getOperand(Idx);
    if (Op.getOpcode() != ISD::EXTRACT_VECTOR_ELT)
      return SDValue();

    // If this is the first extract encountered in V, set the source vector,
    // otherwise verify the extract is from the previously defined source
    // vector.
    if (!SrcVec)
      SrcVec = Op.getOperand(0);
    else if (SrcVec != Op.getOperand(0))
      return SDValue();
    SDValue ExtractedIndex = Op->getOperand(1);
    // Peek through extends.
    if (ExtractedIndex.getOpcode() == ISD::ZERO_EXTEND ||
        ExtractedIndex.getOpcode() == ISD::SIGN_EXTEND)
      ExtractedIndex = ExtractedIndex.getOperand(0);
    if (ExtractedIndex.getOpcode() != ISD::EXTRACT_VECTOR_ELT)
      return SDValue();

    // If this is the first extract from the index vector candidate, set the
    // indices vector, otherwise verify the extract is from the previously
    // defined indices vector.
    if (!IndicesVec)
      IndicesVec = ExtractedIndex.getOperand(0);
    else if (IndicesVec != ExtractedIndex.getOperand(0))
      return SDValue();

    auto *PermIdx = dyn_cast<ConstantSDNode>(ExtractedIndex.getOperand(1));
    if (!PermIdx || PermIdx->getZExtValue() != Idx)
      return SDValue();
  }
  MVT IndicesVT = VT;
  if (VT.isFloatingPoint())
    IndicesVT = MVT::getVectorVT(MVT::getIntegerVT(VT.getScalarSizeInBits()),
                                 VT.getVectorNumElements());
  IndicesVec = DAG.getZExtOrTrunc(IndicesVec, SDLoc(IndicesVec), IndicesVT);
  return DAG.getNode(VT == MVT::v16i8 ? X86ISD::PSHUFB : X86ISD::VPERMV,
                     SDLoc(V), VT, IndicesVec, SrcVec);
}

SDValue
X86TargetLowering::LowerBUILD_VECTOR(SDValue Op, SelectionDAG &DAG) const {
  SDLoc dl(Op);

  MVT VT = Op.getSimpleValueType();
  MVT ExtVT = VT.getVectorElementType();
  unsigned NumElems = Op.getNumOperands();

  // Generate vectors for predicate vectors.
  if (VT.getVectorElementType() == MVT::i1 && Subtarget.hasAVX512())
    return LowerBUILD_VECTORvXi1(Op, DAG);

  if (SDValue VectorConstant = materializeVectorConstant(Op, DAG, Subtarget))
    return VectorConstant;

  BuildVectorSDNode *BV = cast<BuildVectorSDNode>(Op.getNode());
  if (SDValue AddSub = lowerToAddSubOrFMAddSub(BV, Subtarget, DAG))
    return AddSub;
  if (SDValue HorizontalOp = LowerToHorizontalOp(BV, Subtarget, DAG))
    return HorizontalOp;
  if (SDValue Broadcast = lowerBuildVectorAsBroadcast(BV, Subtarget, DAG))
    return Broadcast;
  if (SDValue BitOp = lowerBuildVectorToBitOp(BV, DAG))
    return BitOp;

  unsigned EVTBits = ExtVT.getSizeInBits();

  unsigned NumZero  = 0;
  unsigned NumNonZero = 0;
  uint64_t NonZeros = 0;
  bool IsAllConstants = true;
  SmallSet<SDValue, 8> Values;
  unsigned NumConstants = NumElems;
  for (unsigned i = 0; i < NumElems; ++i) {
    SDValue Elt = Op.getOperand(i);
    if (Elt.isUndef())
      continue;
    Values.insert(Elt);
    if (!isa<ConstantSDNode>(Elt) && !isa<ConstantFPSDNode>(Elt)) {
      IsAllConstants = false;
      NumConstants--;
    }
    if (X86::isZeroNode(Elt))
      NumZero++;
    else {
      assert(i < sizeof(NonZeros) * 8); // Make sure the shift is within range.
      NonZeros |= ((uint64_t)1 << i);
      NumNonZero++;
    }
  }

  // All undef vector. Return an UNDEF.  All zero vectors were handled above.
  if (NumNonZero == 0)
    return DAG.getUNDEF(VT);

  // If we are inserting one variable into a vector of non-zero constants, try
  // to avoid loading each constant element as a scalar. Load the constants as a
  // vector and then insert the variable scalar element. If insertion is not
  // supported, we assume that we will fall back to a shuffle to get the scalar
  // blended with the constants. Insertion into a zero vector is handled as a
  // special-case somewhere below here.
  LLVMContext &Context = *DAG.getContext();
  if (NumConstants == NumElems - 1 && NumNonZero != 1 &&
      (isOperationLegalOrCustom(ISD::INSERT_VECTOR_ELT, VT) ||
       isOperationLegalOrCustom(ISD::VECTOR_SHUFFLE, VT))) {
    // Create an all-constant vector. The variable element in the old
    // build vector is replaced by undef in the constant vector. Save the
    // variable scalar element and its index for use in the insertelement.
    Type *EltType = Op.getValueType().getScalarType().getTypeForEVT(Context);
    SmallVector<Constant *, 16> ConstVecOps(NumElems, UndefValue::get(EltType));
    SDValue VarElt;
    SDValue InsIndex;
    for (unsigned i = 0; i != NumElems; ++i) {
      SDValue Elt = Op.getOperand(i);
      if (auto *C = dyn_cast<ConstantSDNode>(Elt))
        ConstVecOps[i] = ConstantInt::get(Context, C->getAPIntValue());
      else if (auto *C = dyn_cast<ConstantFPSDNode>(Elt))
        ConstVecOps[i] = ConstantFP::get(Context, C->getValueAPF());
      else if (!Elt.isUndef()) {
        assert(!VarElt.getNode() && !InsIndex.getNode() &&
               "Expected one variable element in this vector");
        VarElt = Elt;
        InsIndex = DAG.getConstant(i, dl, getVectorIdxTy(DAG.getDataLayout()));
      }
    }
    Constant *CV = ConstantVector::get(ConstVecOps);
    SDValue DAGConstVec = DAG.getConstantPool(CV, VT);

    // The constants we just created may not be legal (eg, floating point). We
    // must lower the vector right here because we can not guarantee that we'll
    // legalize it before loading it. This is also why we could not just create
    // a new build vector here. If the build vector contains illegal constants,
    // it could get split back up into a series of insert elements.
    // TODO: Improve this by using shorter loads with broadcast/VZEXT_LOAD.
    SDValue LegalDAGConstVec = LowerConstantPool(DAGConstVec, DAG);
    MachineFunction &MF = DAG.getMachineFunction();
    MachinePointerInfo MPI = MachinePointerInfo::getConstantPool(MF);
    SDValue Ld = DAG.getLoad(VT, dl, DAG.getEntryNode(), LegalDAGConstVec, MPI);
    return DAG.getNode(ISD::INSERT_VECTOR_ELT, dl, VT, Ld, VarElt, InsIndex);
  }

  // Special case for single non-zero, non-undef, element.
  if (NumNonZero == 1) {
    unsigned Idx = countTrailingZeros(NonZeros);
    SDValue Item = Op.getOperand(Idx);

    // If this is an insertion of an i64 value on x86-32, and if the top bits of
    // the value are obviously zero, truncate the value to i32 and do the
    // insertion that way.  Only do this if the value is non-constant or if the
    // value is a constant being inserted into element 0.  It is cheaper to do
    // a constant pool load than it is to do a movd + shuffle.
    if (ExtVT == MVT::i64 && !Subtarget.is64Bit() &&
        (!IsAllConstants || Idx == 0)) {
      if (DAG.MaskedValueIsZero(Item, APInt::getHighBitsSet(64, 32))) {
        // Handle SSE only.
        assert(VT == MVT::v2i64 && "Expected an SSE value type!");
        MVT VecVT = MVT::v4i32;

        // Truncate the value (which may itself be a constant) to i32, and
        // convert it to a vector with movd (S2V+shuffle to zero extend).
        Item = DAG.getNode(ISD::TRUNCATE, dl, MVT::i32, Item);
        Item = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VecVT, Item);
        return DAG.getBitcast(VT, getShuffleVectorZeroOrUndef(
                                      Item, Idx * 2, true, Subtarget, DAG));
      }
    }

    // If we have a constant or non-constant insertion into the low element of
    // a vector, we can do this with SCALAR_TO_VECTOR + shuffle of zero into
    // the rest of the elements.  This will be matched as movd/movq/movss/movsd
    // depending on what the source datatype is.
    if (Idx == 0) {
      if (NumZero == 0)
        return DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VT, Item);

      if (ExtVT == MVT::i32 || ExtVT == MVT::f32 || ExtVT == MVT::f64 ||
          (ExtVT == MVT::i64 && Subtarget.is64Bit())) {
        assert((VT.is128BitVector() || VT.is256BitVector() ||
                VT.is512BitVector()) &&
               "Expected an SSE value type!");
        Item = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VT, Item);
        // Turn it into a MOVL (i.e. movss, movsd, or movd) to a zero vector.
        return getShuffleVectorZeroOrUndef(Item, 0, true, Subtarget, DAG);
      }

      // We can't directly insert an i8 or i16 into a vector, so zero extend
      // it to i32 first.
      if (ExtVT == MVT::i16 || ExtVT == MVT::i8) {
        Item = DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::i32, Item);
        if (VT.getSizeInBits() >= 256) {
          MVT ShufVT = MVT::getVectorVT(MVT::i32, VT.getSizeInBits()/32);
          if (Subtarget.hasAVX()) {
            Item = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, ShufVT, Item);
            Item = getShuffleVectorZeroOrUndef(Item, 0, true, Subtarget, DAG);
          } else {
            // Without AVX, we need to extend to a 128-bit vector and then
            // insert into the 256-bit vector.
            Item = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, MVT::v4i32, Item);
            SDValue ZeroVec = getZeroVector(ShufVT, Subtarget, DAG, dl);
            Item = insert128BitVector(ZeroVec, Item, 0, DAG, dl);
          }
        } else {
          assert(VT.is128BitVector() && "Expected an SSE value type!");
          Item = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, MVT::v4i32, Item);
          Item = getShuffleVectorZeroOrUndef(Item, 0, true, Subtarget, DAG);
        }
        return DAG.getBitcast(VT, Item);
      }
    }

    // Is it a vector logical left shift?
    if (NumElems == 2 && Idx == 1 &&
        X86::isZeroNode(Op.getOperand(0)) &&
        !X86::isZeroNode(Op.getOperand(1))) {
      unsigned NumBits = VT.getSizeInBits();
      return getVShift(true, VT,
                       DAG.getNode(ISD::SCALAR_TO_VECTOR, dl,
                                   VT, Op.getOperand(1)),
                       NumBits/2, DAG, *this, dl);
    }

    if (IsAllConstants) // Otherwise, it's better to do a constpool load.
      return SDValue();

    // Otherwise, if this is a vector with i32 or f32 elements, and the element
    // is a non-constant being inserted into an element other than the low one,
    // we can't use a constant pool load.  Instead, use SCALAR_TO_VECTOR (aka
    // movd/movss) to move this into the low element, then shuffle it into
    // place.
    if (EVTBits == 32) {
      Item = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VT, Item);
      return getShuffleVectorZeroOrUndef(Item, Idx, NumZero > 0, Subtarget, DAG);
    }
  }

  // Splat is obviously ok. Let legalizer expand it to a shuffle.
  if (Values.size() == 1) {
    if (EVTBits == 32) {
      // Instead of a shuffle like this:
      // shuffle (scalar_to_vector (load (ptr + 4))), undef, <0, 0, 0, 0>
      // Check if it's possible to issue this instead.
      // shuffle (vload ptr)), undef, <1, 1, 1, 1>
      unsigned Idx = countTrailingZeros(NonZeros);
      SDValue Item = Op.getOperand(Idx);
      if (Op.getNode()->isOnlyUserOf(Item.getNode()))
        return LowerAsSplatVectorLoad(Item, VT, dl, DAG);
    }
    return SDValue();
  }

  // A vector full of immediates; various special cases are already
  // handled, so this is best done with a single constant-pool load.
  if (IsAllConstants)
    return SDValue();

  if (SDValue V = LowerBUILD_VECTORAsVariablePermute(Op, DAG, Subtarget))
      return V;

  // See if we can use a vector load to get all of the elements.
  if (VT.is128BitVector() || VT.is256BitVector() || VT.is512BitVector()) {
    SmallVector<SDValue, 64> Ops(Op->op_begin(), Op->op_begin() + NumElems);
    if (SDValue LD =
            EltsFromConsecutiveLoads(VT, Ops, dl, DAG, Subtarget, false))
      return LD;
  }

  // For AVX-length vectors, build the individual 128-bit pieces and use
  // shuffles to put them in place.
  if (VT.is256BitVector() || VT.is512BitVector()) {
    EVT HVT = EVT::getVectorVT(Context, ExtVT, NumElems/2);

    // Build both the lower and upper subvector.
    SDValue Lower =
        DAG.getBuildVector(HVT, dl, Op->ops().slice(0, NumElems / 2));
    SDValue Upper = DAG.getBuildVector(
        HVT, dl, Op->ops().slice(NumElems / 2, NumElems /2));

    // Recreate the wider vector with the lower and upper part.
    if (VT.is256BitVector())
      return concat128BitVectors(Lower, Upper, VT, NumElems, DAG, dl);
    return concat256BitVectors(Lower, Upper, VT, NumElems, DAG, dl);
  }

  // Let legalizer expand 2-wide build_vectors.
  if (EVTBits == 64) {
    if (NumNonZero == 1) {
      // One half is zero or undef.
      unsigned Idx = countTrailingZeros(NonZeros);
      SDValue V2 = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VT,
                               Op.getOperand(Idx));
      return getShuffleVectorZeroOrUndef(V2, Idx, true, Subtarget, DAG);
    }
    return SDValue();
  }

  // If element VT is < 32 bits, convert it to inserts into a zero vector.
  if (EVTBits == 8 && NumElems == 16)
    if (SDValue V = LowerBuildVectorv16i8(Op, NonZeros, NumNonZero, NumZero,
                                          DAG, Subtarget))
      return V;

  if (EVTBits == 16 && NumElems == 8)
    if (SDValue V = LowerBuildVectorv8i16(Op, NonZeros, NumNonZero, NumZero,
                                          DAG, Subtarget))
      return V;

  // If element VT is == 32 bits and has 4 elems, try to generate an INSERTPS
  if (EVTBits == 32 && NumElems == 4)
    if (SDValue V = LowerBuildVectorv4x32(Op, DAG, Subtarget))
      return V;

  // If element VT is == 32 bits, turn it into a number of shuffles.
  if (NumElems == 4 && NumZero > 0) {
    SmallVector<SDValue, 8> Ops(NumElems);
    for (unsigned i = 0; i < 4; ++i) {
      bool isZero = !(NonZeros & (1ULL << i));
      if (isZero)
        Ops[i] = getZeroVector(VT, Subtarget, DAG, dl);
      else
        Ops[i] = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VT, Op.getOperand(i));
    }

    for (unsigned i = 0; i < 2; ++i) {
      switch ((NonZeros & (0x3 << i*2)) >> (i*2)) {
        default: break;
        case 0:
          Ops[i] = Ops[i*2];  // Must be a zero vector.
          break;
        case 1:
          Ops[i] = getMOVL(DAG, dl, VT, Ops[i*2+1], Ops[i*2]);
          break;
        case 2:
          Ops[i] = getMOVL(DAG, dl, VT, Ops[i*2], Ops[i*2+1]);
          break;
        case 3:
          Ops[i] = getUnpackl(DAG, dl, VT, Ops[i*2], Ops[i*2+1]);
          break;
      }
    }

    bool Reverse1 = (NonZeros & 0x3) == 2;
    bool Reverse2 = ((NonZeros & (0x3 << 2)) >> 2) == 2;
    int MaskVec[] = {
      Reverse1 ? 1 : 0,
      Reverse1 ? 0 : 1,
      static_cast<int>(Reverse2 ? NumElems+1 : NumElems),
      static_cast<int>(Reverse2 ? NumElems   : NumElems+1)
    };
    return DAG.getVectorShuffle(VT, dl, Ops[0], Ops[1], MaskVec);
  }

  if (Values.size() > 1 && VT.is128BitVector()) {
    // Check for a build vector from mostly shuffle plus few inserting.
    if (SDValue Sh = buildFromShuffleMostly(Op, DAG))
      return Sh;

    // For SSE 4.1, use insertps to put the high elements into the low element.
    if (Subtarget.hasSSE41()) {
      SDValue Result;
      if (!Op.getOperand(0).isUndef())
        Result = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VT, Op.getOperand(0));
      else
        Result = DAG.getUNDEF(VT);

      for (unsigned i = 1; i < NumElems; ++i) {
        if (Op.getOperand(i).isUndef()) continue;
        Result = DAG.getNode(ISD::INSERT_VECTOR_ELT, dl, VT, Result,
                             Op.getOperand(i), DAG.getIntPtrConstant(i, dl));
      }
      return Result;
    }

    // Otherwise, expand into a number of unpckl*, start by extending each of
    // our (non-undef) elements to the full vector width with the element in the
    // bottom slot of the vector (which generates no code for SSE).
    SmallVector<SDValue, 8> Ops(NumElems);
    for (unsigned i = 0; i < NumElems; ++i) {
      if (!Op.getOperand(i).isUndef())
        Ops[i] = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VT, Op.getOperand(i));
      else
        Ops[i] = DAG.getUNDEF(VT);
    }

    // Next, we iteratively mix elements, e.g. for v4f32:
    //   Step 1: unpcklps 0, 1 ==> X: <?, ?, 1, 0>
    //         : unpcklps 2, 3 ==> Y: <?, ?, 3, 2>
    //   Step 2: unpcklpd X, Y ==>    <3, 2, 1, 0>
    for (unsigned Scale = 1; Scale < NumElems; Scale *= 2) {
      // Generate scaled UNPCKL shuffle mask.
      SmallVector<int, 16> Mask;
      for(unsigned i = 0; i != Scale; ++i)
        Mask.push_back(i);
      for (unsigned i = 0; i != Scale; ++i)
        Mask.push_back(NumElems+i);
      Mask.append(NumElems - Mask.size(), SM_SentinelUndef);

      for (unsigned i = 0, e = NumElems / (2 * Scale); i != e; ++i)
        Ops[i] = DAG.getVectorShuffle(VT, dl, Ops[2*i], Ops[(2*i)+1], Mask);
    }
    return Ops[0];
  }
  return SDValue();
}

// 256-bit AVX can use the vinsertf128 instruction
// to create 256-bit vectors from two other 128-bit ones.
static SDValue LowerAVXCONCAT_VECTORS(SDValue Op, SelectionDAG &DAG) {
  SDLoc dl(Op);
  MVT ResVT = Op.getSimpleValueType();

  assert((ResVT.is256BitVector() ||
          ResVT.is512BitVector()) && "Value type must be 256-/512-bit wide");

  SDValue V1 = Op.getOperand(0);
  SDValue V2 = Op.getOperand(1);
  unsigned NumElems = ResVT.getVectorNumElements();
  if (ResVT.is256BitVector())
    return concat128BitVectors(V1, V2, ResVT, NumElems, DAG, dl);

  if (Op.getNumOperands() == 4) {
    MVT HalfVT = MVT::getVectorVT(ResVT.getVectorElementType(),
                                  ResVT.getVectorNumElements()/2);
    SDValue V3 = Op.getOperand(2);
    SDValue V4 = Op.getOperand(3);
    return concat256BitVectors(
        concat128BitVectors(V1, V2, HalfVT, NumElems / 2, DAG, dl),
        concat128BitVectors(V3, V4, HalfVT, NumElems / 2, DAG, dl), ResVT,
        NumElems, DAG, dl);
  }
  return concat256BitVectors(V1, V2, ResVT, NumElems, DAG, dl);
}

// Return true if all the operands of the given CONCAT_VECTORS node are zeros
// except for the first one. (CONCAT_VECTORS Op, 0, 0,...,0)
static bool isExpandWithZeros(const SDValue &Op) {
  assert(Op.getOpcode() == ISD::CONCAT_VECTORS &&
         "Expand with zeros only possible in CONCAT_VECTORS nodes!");

  for (unsigned i = 1; i < Op.getNumOperands(); i++)
    if (!ISD::isBuildVectorAllZeros(Op.getOperand(i).getNode()))
      return false;

  return true;
}

// Returns true if the given node is a type promotion (by concatenating i1
// zeros) of the result of a node that already zeros all upper bits of
// k-register.
static SDValue isTypePromotionOfi1ZeroUpBits(SDValue Op) {
  unsigned Opc = Op.getOpcode();

  assert(Opc == ISD::CONCAT_VECTORS &&
         Op.getSimpleValueType().getVectorElementType() == MVT::i1 &&
         "Unexpected node to check for type promotion!");

  // As long as we are concatenating zeros to the upper part of a previous node
  // result, climb up the tree until a node with different opcode is
  // encountered
  while (Opc == ISD::INSERT_SUBVECTOR || Opc == ISD::CONCAT_VECTORS) {
    if (Opc == ISD::INSERT_SUBVECTOR) {
      if (ISD::isBuildVectorAllZeros(Op.getOperand(0).getNode()) &&
          Op.getConstantOperandVal(2) == 0)
        Op = Op.getOperand(1);
      else
        return SDValue();
    } else { // Opc == ISD::CONCAT_VECTORS
      if (isExpandWithZeros(Op))
        Op = Op.getOperand(0);
      else
        return SDValue();
    }
    Opc = Op.getOpcode();
  }

  // Check if the first inserted node zeroes the upper bits, or an 'and' result
  // of a node that zeros the upper bits (its masked version).
  if (isMaskedZeroUpperBitsvXi1(Op.getOpcode()) ||
      (Op.getOpcode() == ISD::AND &&
       (isMaskedZeroUpperBitsvXi1(Op.getOperand(0).getOpcode()) ||
        isMaskedZeroUpperBitsvXi1(Op.getOperand(1).getOpcode())))) {
    return Op;
  }

  return SDValue();
}

static SDValue LowerCONCAT_VECTORSvXi1(SDValue Op,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG & DAG) {
  SDLoc dl(Op);
  MVT ResVT = Op.getSimpleValueType();
  unsigned NumOfOperands = Op.getNumOperands();

  assert(isPowerOf2_32(NumOfOperands) &&
         "Unexpected number of operands in CONCAT_VECTORS");

  // If this node promotes - by concatenating zeroes - the type of the result
  // of a node with instruction that zeroes all upper (irrelevant) bits of the
  // output register, mark it as legal and catch the pattern in instruction
  // selection to avoid emitting extra instructions (for zeroing upper bits).
  if (SDValue Promoted = isTypePromotionOfi1ZeroUpBits(Op)) {
    SDValue ZeroC = DAG.getIntPtrConstant(0, dl);
    SDValue AllZeros = getZeroVector(ResVT, Subtarget, DAG, dl);
    return DAG.getNode(ISD::INSERT_SUBVECTOR, dl, ResVT, AllZeros, Promoted,
                       ZeroC);
  }

  SDValue Undef = DAG.getUNDEF(ResVT);
  if (NumOfOperands > 2) {
    // Specialize the cases when all, or all but one, of the operands are undef.
    unsigned NumOfDefinedOps = 0;
    unsigned OpIdx = 0;
    for (unsigned i = 0; i < NumOfOperands; i++)
      if (!Op.getOperand(i).isUndef()) {
        NumOfDefinedOps++;
        OpIdx = i;
      }
    if (NumOfDefinedOps == 0)
      return Undef;
    if (NumOfDefinedOps == 1) {
      unsigned SubVecNumElts =
        Op.getOperand(OpIdx).getValueType().getVectorNumElements();
      SDValue IdxVal = DAG.getIntPtrConstant(SubVecNumElts * OpIdx, dl);
      return DAG.getNode(ISD::INSERT_SUBVECTOR, dl, ResVT, Undef,
                         Op.getOperand(OpIdx), IdxVal);
    }

    MVT HalfVT = MVT::getVectorVT(ResVT.getVectorElementType(),
                                  ResVT.getVectorNumElements()/2);
    SmallVector<SDValue, 2> Ops;
    for (unsigned i = 0; i < NumOfOperands/2; i++)
      Ops.push_back(Op.getOperand(i));
    SDValue Lo = DAG.getNode(ISD::CONCAT_VECTORS, dl, HalfVT, Ops);
    Ops.clear();
    for (unsigned i = NumOfOperands/2; i < NumOfOperands; i++)
      Ops.push_back(Op.getOperand(i));
    SDValue Hi = DAG.getNode(ISD::CONCAT_VECTORS, dl, HalfVT, Ops);
    return DAG.getNode(ISD::CONCAT_VECTORS, dl, ResVT, Lo, Hi);
  }

  // 2 operands
  SDValue V1 = Op.getOperand(0);
  SDValue V2 = Op.getOperand(1);
  unsigned NumElems = ResVT.getVectorNumElements();
  assert(V1.getValueType() == V2.getValueType() &&
         V1.getValueType().getVectorNumElements() == NumElems/2 &&
         "Unexpected operands in CONCAT_VECTORS");

  if (ResVT.getSizeInBits() >= 16)
    return Op; // The operation is legal with KUNPCK

  bool IsZeroV1 = ISD::isBuildVectorAllZeros(V1.getNode());
  bool IsZeroV2 = ISD::isBuildVectorAllZeros(V2.getNode());
  SDValue ZeroVec = getZeroVector(ResVT, Subtarget, DAG, dl);
  if (IsZeroV1 && IsZeroV2)
    return ZeroVec;

  SDValue ZeroIdx = DAG.getIntPtrConstant(0, dl);
  if (V2.isUndef())
    return DAG.getNode(ISD::INSERT_SUBVECTOR, dl, ResVT, Undef, V1, ZeroIdx);
  if (IsZeroV2)
    return DAG.getNode(ISD::INSERT_SUBVECTOR, dl, ResVT, ZeroVec, V1, ZeroIdx);

  SDValue IdxVal = DAG.getIntPtrConstant(NumElems/2, dl);
  if (V1.isUndef())
    return DAG.getNode(ISD::INSERT_SUBVECTOR, dl, ResVT, Undef, V2, IdxVal);

  if (IsZeroV1)
    return DAG.getNode(ISD::INSERT_SUBVECTOR, dl, ResVT, ZeroVec, V2, IdxVal);

  V1 = DAG.getNode(ISD::INSERT_SUBVECTOR, dl, ResVT, Undef, V1, ZeroIdx);
  return DAG.getNode(ISD::INSERT_SUBVECTOR, dl, ResVT, V1, V2, IdxVal);
}

static SDValue LowerCONCAT_VECTORS(SDValue Op,
                                   const X86Subtarget &Subtarget,
                                   SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();
  if (VT.getVectorElementType() == MVT::i1)
    return LowerCONCAT_VECTORSvXi1(Op, Subtarget, DAG);

  assert((VT.is256BitVector() && Op.getNumOperands() == 2) ||
         (VT.is512BitVector() && (Op.getNumOperands() == 2 ||
          Op.getNumOperands() == 4)));

  // AVX can use the vinsertf128 instruction to create 256-bit vectors
  // from two other 128-bit ones.

  // 512-bit vector may contain 2 256-bit vectors or 4 128-bit vectors
  return LowerAVXCONCAT_VECTORS(Op, DAG);
}

//===----------------------------------------------------------------------===//
// Vector shuffle lowering
//
// This is an experimental code path for lowering vector shuffles on x86. It is
// designed to handle arbitrary vector shuffles and blends, gracefully
// degrading performance as necessary. It works hard to recognize idiomatic
// shuffles and lower them to optimal instruction patterns without leaving
// a framework that allows reasonably efficient handling of all vector shuffle
// patterns.
//===----------------------------------------------------------------------===//

/// \brief Tiny helper function to identify a no-op mask.
///
/// This is a somewhat boring predicate function. It checks whether the mask
/// array input, which is assumed to be a single-input shuffle mask of the kind
/// used by the X86 shuffle instructions (not a fully general
/// ShuffleVectorSDNode mask) requires any shuffles to occur. Both undef and an
/// in-place shuffle are 'no-op's.
static bool isNoopShuffleMask(ArrayRef<int> Mask) {
  for (int i = 0, Size = Mask.size(); i < Size; ++i) {
    assert(Mask[i] >= -1 && "Out of bound mask element!");
    if (Mask[i] >= 0 && Mask[i] != i)
      return false;
  }
  return true;
}

/// \brief Test whether there are elements crossing 128-bit lanes in this
/// shuffle mask.
///
/// X86 divides up its shuffles into in-lane and cross-lane shuffle operations
/// and we routinely test for these.
static bool is128BitLaneCrossingShuffleMask(MVT VT, ArrayRef<int> Mask) {
  int LaneSize = 128 / VT.getScalarSizeInBits();
  int Size = Mask.size();
  for (int i = 0; i < Size; ++i)
    if (Mask[i] >= 0 && (Mask[i] % Size) / LaneSize != i / LaneSize)
      return true;
  return false;
}

/// \brief Test whether a shuffle mask is equivalent within each sub-lane.
///
/// This checks a shuffle mask to see if it is performing the same
/// lane-relative shuffle in each sub-lane. This trivially implies
/// that it is also not lane-crossing. It may however involve a blend from the
/// same lane of a second vector.
///
/// The specific repeated shuffle mask is populated in \p RepeatedMask, as it is
/// non-trivial to compute in the face of undef lanes. The representation is
/// suitable for use with existing 128-bit shuffles as entries from the second
/// vector have been remapped to [LaneSize, 2*LaneSize).
static bool isRepeatedShuffleMask(unsigned LaneSizeInBits, MVT VT,
                                  ArrayRef<int> Mask,
                                  SmallVectorImpl<int> &RepeatedMask) {
  auto LaneSize = LaneSizeInBits / VT.getScalarSizeInBits();
  RepeatedMask.assign(LaneSize, -1);
  int Size = Mask.size();
  for (int i = 0; i < Size; ++i) {
    assert(Mask[i] == SM_SentinelUndef || Mask[i] >= 0);
    if (Mask[i] < 0)
      continue;
    if ((Mask[i] % Size) / LaneSize != i / LaneSize)
      // This entry crosses lanes, so there is no way to model this shuffle.
      return false;

    // Ok, handle the in-lane shuffles by detecting if and when they repeat.
    // Adjust second vector indices to start at LaneSize instead of Size.
    int LocalM = Mask[i] < Size ? Mask[i] % LaneSize
                                : Mask[i] % LaneSize + LaneSize;
    if (RepeatedMask[i % LaneSize] < 0)
      // This is the first non-undef entry in this slot of a 128-bit lane.
      RepeatedMask[i % LaneSize] = LocalM;
    else if (RepeatedMask[i % LaneSize] != LocalM)
      // Found a mismatch with the repeated mask.
      return false;
  }
  return true;
}

/// Test whether a shuffle mask is equivalent within each 128-bit lane.
static bool
is128BitLaneRepeatedShuffleMask(MVT VT, ArrayRef<int> Mask,
                                SmallVectorImpl<int> &RepeatedMask) {
  return isRepeatedShuffleMask(128, VT, Mask, RepeatedMask);
}

/// Test whether a shuffle mask is equivalent within each 256-bit lane.
static bool
is256BitLaneRepeatedShuffleMask(MVT VT, ArrayRef<int> Mask,
                                SmallVectorImpl<int> &RepeatedMask) {
  return isRepeatedShuffleMask(256, VT, Mask, RepeatedMask);
}

/// Test whether a target shuffle mask is equivalent within each sub-lane.
/// Unlike isRepeatedShuffleMask we must respect SM_SentinelZero.
static bool isRepeatedTargetShuffleMask(unsigned LaneSizeInBits, MVT VT,
                                        ArrayRef<int> Mask,
                                        SmallVectorImpl<int> &RepeatedMask) {
  int LaneSize = LaneSizeInBits / VT.getScalarSizeInBits();
  RepeatedMask.assign(LaneSize, SM_SentinelUndef);
  int Size = Mask.size();
  for (int i = 0; i < Size; ++i) {
    assert(isUndefOrZero(Mask[i]) || (Mask[i] >= 0));
    if (Mask[i] == SM_SentinelUndef)
      continue;
    if (Mask[i] == SM_SentinelZero) {
      if (!isUndefOrZero(RepeatedMask[i % LaneSize]))
        return false;
      RepeatedMask[i % LaneSize] = SM_SentinelZero;
      continue;
    }
    if ((Mask[i] % Size) / LaneSize != i / LaneSize)
      // This entry crosses lanes, so there is no way to model this shuffle.
      return false;

    // Ok, handle the in-lane shuffles by detecting if and when they repeat.
    // Adjust second vector indices to start at LaneSize instead of Size.
    int LocalM =
        Mask[i] < Size ? Mask[i] % LaneSize : Mask[i] % LaneSize + LaneSize;
    if (RepeatedMask[i % LaneSize] == SM_SentinelUndef)
      // This is the first non-undef entry in this slot of a 128-bit lane.
      RepeatedMask[i % LaneSize] = LocalM;
    else if (RepeatedMask[i % LaneSize] != LocalM)
      // Found a mismatch with the repeated mask.
      return false;
  }
  return true;
}

/// \brief Checks whether a shuffle mask is equivalent to an explicit list of
/// arguments.
///
/// This is a fast way to test a shuffle mask against a fixed pattern:
///
///   if (isShuffleEquivalent(Mask, 3, 2, {1, 0})) { ... }
///
/// It returns true if the mask is exactly as wide as the argument list, and
/// each element of the mask is either -1 (signifying undef) or the value given
/// in the argument.
static bool isShuffleEquivalent(SDValue V1, SDValue V2, ArrayRef<int> Mask,
                                ArrayRef<int> ExpectedMask) {
  if (Mask.size() != ExpectedMask.size())
    return false;

  int Size = Mask.size();

  // If the values are build vectors, we can look through them to find
  // equivalent inputs that make the shuffles equivalent.
  auto *BV1 = dyn_cast<BuildVectorSDNode>(V1);
  auto *BV2 = dyn_cast<BuildVectorSDNode>(V2);

  for (int i = 0; i < Size; ++i) {
    assert(Mask[i] >= -1 && "Out of bound mask element!");
    if (Mask[i] >= 0 && Mask[i] != ExpectedMask[i]) {
      auto *MaskBV = Mask[i] < Size ? BV1 : BV2;
      auto *ExpectedBV = ExpectedMask[i] < Size ? BV1 : BV2;
      if (!MaskBV || !ExpectedBV ||
          MaskBV->getOperand(Mask[i] % Size) !=
              ExpectedBV->getOperand(ExpectedMask[i] % Size))
        return false;
    }
  }

  return true;
}

/// Checks whether a target shuffle mask is equivalent to an explicit pattern.
///
/// The masks must be exactly the same width.
///
/// If an element in Mask matches SM_SentinelUndef (-1) then the corresponding
/// value in ExpectedMask is always accepted. Otherwise the indices must match.
///
/// SM_SentinelZero is accepted as a valid negative index but must match in both.
static bool isTargetShuffleEquivalent(ArrayRef<int> Mask,
                                      ArrayRef<int> ExpectedMask) {
  int Size = Mask.size();
  if (Size != (int)ExpectedMask.size())
    return false;

  for (int i = 0; i < Size; ++i)
    if (Mask[i] == SM_SentinelUndef)
      continue;
    else if (Mask[i] < 0 && Mask[i] != SM_SentinelZero)
      return false;
    else if (Mask[i] != ExpectedMask[i])
      return false;

  return true;
}

// Merges a general DAG shuffle mask and zeroable bit mask into a target shuffle
// mask.
static SmallVector<int, 64> createTargetShuffleMask(ArrayRef<int> Mask,
                                                    const APInt &Zeroable) {
  int NumElts = Mask.size();
  assert(NumElts == (int)Zeroable.getBitWidth() && "Mismatch mask sizes");

  SmallVector<int, 64> TargetMask(NumElts, SM_SentinelUndef);
  for (int i = 0; i != NumElts; ++i) {
    int M = Mask[i];
    if (M == SM_SentinelUndef)
      continue;
    assert(0 <= M && M < (2 * NumElts) && "Out of range shuffle index");
    TargetMask[i] = (Zeroable[i] ? SM_SentinelZero : M);
  }
  return TargetMask;
}

// Check if the shuffle mask is suitable for the AVX vpunpcklwd or vpunpckhwd
// instructions.
static bool isUnpackWdShuffleMask(ArrayRef<int> Mask, MVT VT) {
  if (VT != MVT::v8i32 && VT != MVT::v8f32)
    return false;

  SmallVector<int, 8> Unpcklwd;
  createUnpackShuffleMask(MVT::v8i16, Unpcklwd, /* Lo = */ true,
                          /* Unary = */ false);
  SmallVector<int, 8> Unpckhwd;
  createUnpackShuffleMask(MVT::v8i16, Unpckhwd, /* Lo = */ false,
                          /* Unary = */ false);
  bool IsUnpackwdMask = (isTargetShuffleEquivalent(Mask, Unpcklwd) ||
                         isTargetShuffleEquivalent(Mask, Unpckhwd));
  return IsUnpackwdMask;
}

/// \brief Get a 4-lane 8-bit shuffle immediate for a mask.
///
/// This helper function produces an 8-bit shuffle immediate corresponding to
/// the ubiquitous shuffle encoding scheme used in x86 instructions for
/// shuffling 4 lanes. It can be used with most of the PSHUF instructions for
/// example.
///
/// NB: We rely heavily on "undef" masks preserving the input lane.
static unsigned getV4X86ShuffleImm(ArrayRef<int> Mask) {
  assert(Mask.size() == 4 && "Only 4-lane shuffle masks");
  assert(Mask[0] >= -1 && Mask[0] < 4 && "Out of bound mask element!");
  assert(Mask[1] >= -1 && Mask[1] < 4 && "Out of bound mask element!");
  assert(Mask[2] >= -1 && Mask[2] < 4 && "Out of bound mask element!");
  assert(Mask[3] >= -1 && Mask[3] < 4 && "Out of bound mask element!");

  unsigned Imm = 0;
  Imm |= (Mask[0] < 0 ? 0 : Mask[0]) << 0;
  Imm |= (Mask[1] < 0 ? 1 : Mask[1]) << 2;
  Imm |= (Mask[2] < 0 ? 2 : Mask[2]) << 4;
  Imm |= (Mask[3] < 0 ? 3 : Mask[3]) << 6;
  return Imm;
}

static SDValue getV4X86ShuffleImm8ForMask(ArrayRef<int> Mask, const SDLoc &DL,
                                          SelectionDAG &DAG) {
  return DAG.getConstant(getV4X86ShuffleImm(Mask), DL, MVT::i8);
}

/// \brief Compute whether each element of a shuffle is zeroable.
///
/// A "zeroable" vector shuffle element is one which can be lowered to zero.
/// Either it is an undef element in the shuffle mask, the element of the input
/// referenced is undef, or the element of the input referenced is known to be
/// zero. Many x86 shuffles can zero lanes cheaply and we often want to handle
/// as many lanes with this technique as possible to simplify the remaining
/// shuffle.
static APInt computeZeroableShuffleElements(ArrayRef<int> Mask,
                                            SDValue V1, SDValue V2) {
  APInt Zeroable(Mask.size(), 0);
  V1 = peekThroughBitcasts(V1);
  V2 = peekThroughBitcasts(V2);

  bool V1IsZero = ISD::isBuildVectorAllZeros(V1.getNode());
  bool V2IsZero = ISD::isBuildVectorAllZeros(V2.getNode());

  int VectorSizeInBits = V1.getValueSizeInBits();
  int ScalarSizeInBits = VectorSizeInBits / Mask.size();
  assert(!(VectorSizeInBits % ScalarSizeInBits) && "Illegal shuffle mask size");

  for (int i = 0, Size = Mask.size(); i < Size; ++i) {
    int M = Mask[i];
    // Handle the easy cases.
    if (M < 0 || (M >= 0 && M < Size && V1IsZero) || (M >= Size && V2IsZero)) {
      Zeroable.setBit(i);
      continue;
    }

    // Determine shuffle input and normalize the mask.
    SDValue V = M < Size ? V1 : V2;
    M %= Size;

    // Currently we can only search BUILD_VECTOR for UNDEF/ZERO elements.
    if (V.getOpcode() != ISD::BUILD_VECTOR)
      continue;

    // If the BUILD_VECTOR has fewer elements then the bitcasted portion of
    // the (larger) source element must be UNDEF/ZERO.
    if ((Size % V.getNumOperands()) == 0) {
      int Scale = Size / V->getNumOperands();
      SDValue Op = V.getOperand(M / Scale);
      if (Op.isUndef() || X86::isZeroNode(Op))
        Zeroable.setBit(i);
      else if (ConstantSDNode *Cst = dyn_cast<ConstantSDNode>(Op)) {
        APInt Val = Cst->getAPIntValue();
        Val.lshrInPlace((M % Scale) * ScalarSizeInBits);
        Val = Val.getLoBits(ScalarSizeInBits);
        if (Val == 0)
          Zeroable.setBit(i);
      } else if (ConstantFPSDNode *Cst = dyn_cast<ConstantFPSDNode>(Op)) {
        APInt Val = Cst->getValueAPF().bitcastToAPInt();
        Val.lshrInPlace((M % Scale) * ScalarSizeInBits);
        Val = Val.getLoBits(ScalarSizeInBits);
        if (Val == 0)
          Zeroable.setBit(i);
      }
      continue;
    }

    // If the BUILD_VECTOR has more elements then all the (smaller) source
    // elements must be UNDEF or ZERO.
    if ((V.getNumOperands() % Size) == 0) {
      int Scale = V->getNumOperands() / Size;
      bool AllZeroable = true;
      for (int j = 0; j < Scale; ++j) {
        SDValue Op = V.getOperand((M * Scale) + j);
        AllZeroable &= (Op.isUndef() || X86::isZeroNode(Op));
      }
      if (AllZeroable)
        Zeroable.setBit(i);
      continue;
    }
  }

  return Zeroable;
}

// The Shuffle result is as follow:
// 0*a[0]0*a[1]...0*a[n] , n >=0 where a[] elements in a ascending order.
// Each Zeroable's element correspond to a particular Mask's element.
// As described in computeZeroableShuffleElements function.
//
// The function looks for a sub-mask that the nonzero elements are in
// increasing order. If such sub-mask exist. The function returns true.
static bool isNonZeroElementsInOrder(const APInt &Zeroable,
                                     ArrayRef<int> Mask, const EVT &VectorType,
                                     bool &IsZeroSideLeft) {
  int NextElement = -1;
  // Check if the Mask's nonzero elements are in increasing order.
  for (int i = 0, e = Mask.size(); i < e; i++) {
    // Checks if the mask's zeros elements are built from only zeros.
    assert(Mask[i] >= -1 && "Out of bound mask element!");
    if (Mask[i] < 0)
      return false;
    if (Zeroable[i])
      continue;
    // Find the lowest non zero element
    if (NextElement < 0) {
      NextElement = Mask[i] != 0 ? VectorType.getVectorNumElements() : 0;
      IsZeroSideLeft = NextElement != 0;
    }
    // Exit if the mask's non zero elements are not in increasing order.
    if (NextElement != Mask[i])
      return false;
    NextElement++;
  }
  return true;
}

/// Try to lower a shuffle with a single PSHUFB of V1 or V2.
static SDValue lowerVectorShuffleWithPSHUFB(const SDLoc &DL, MVT VT,
                                            ArrayRef<int> Mask, SDValue V1,
                                            SDValue V2,
                                            const APInt &Zeroable,
                                            const X86Subtarget &Subtarget,
                                            SelectionDAG &DAG) {
  int Size = Mask.size();
  int LaneSize = 128 / VT.getScalarSizeInBits();
  const int NumBytes = VT.getSizeInBits() / 8;
  const int NumEltBytes = VT.getScalarSizeInBits() / 8;

  assert((Subtarget.hasSSSE3() && VT.is128BitVector()) ||
         (Subtarget.hasAVX2() && VT.is256BitVector()) ||
         (Subtarget.hasBWI() && VT.is512BitVector()));

  SmallVector<SDValue, 64> PSHUFBMask(NumBytes);
  // Sign bit set in i8 mask means zero element.
  SDValue ZeroMask = DAG.getConstant(0x80, DL, MVT::i8);

  SDValue V;
  for (int i = 0; i < NumBytes; ++i) {
    int M = Mask[i / NumEltBytes];
    if (M < 0) {
      PSHUFBMask[i] = DAG.getUNDEF(MVT::i8);
      continue;
    }
    if (Zeroable[i / NumEltBytes]) {
      PSHUFBMask[i] = ZeroMask;
      continue;
    }

    // We can only use a single input of V1 or V2.
    SDValue SrcV = (M >= Size ? V2 : V1);
    if (V && V != SrcV)
      return SDValue();
    V = SrcV;
    M %= Size;

    // PSHUFB can't cross lanes, ensure this doesn't happen.
    if ((M / LaneSize) != ((i / NumEltBytes) / LaneSize))
      return SDValue();

    M = M % LaneSize;
    M = M * NumEltBytes + (i % NumEltBytes);
    PSHUFBMask[i] = DAG.getConstant(M, DL, MVT::i8);
  }
  assert(V && "Failed to find a source input");

  MVT I8VT = MVT::getVectorVT(MVT::i8, NumBytes);
  return DAG.getBitcast(
      VT, DAG.getNode(X86ISD::PSHUFB, DL, I8VT, DAG.getBitcast(I8VT, V),
                      DAG.getBuildVector(I8VT, DL, PSHUFBMask)));
}

static SDValue getMaskNode(SDValue Mask, MVT MaskVT,
                           const X86Subtarget &Subtarget, SelectionDAG &DAG,
                           const SDLoc &dl);

// X86 has dedicated shuffle that can be lowered to VEXPAND
static SDValue lowerVectorShuffleToEXPAND(const SDLoc &DL, MVT VT,
                                          const APInt &Zeroable,
                                          ArrayRef<int> Mask, SDValue &V1,
                                          SDValue &V2, SelectionDAG &DAG,
                                          const X86Subtarget &Subtarget) {
  bool IsLeftZeroSide = true;
  if (!isNonZeroElementsInOrder(Zeroable, Mask, V1.getValueType(),
                                IsLeftZeroSide))
    return SDValue();
  unsigned VEXPANDMask = (~Zeroable).getZExtValue();
  MVT IntegerType =
      MVT::getIntegerVT(std::max((int)VT.getVectorNumElements(), 8));
  SDValue MaskNode = DAG.getConstant(VEXPANDMask, DL, IntegerType);
  unsigned NumElts = VT.getVectorNumElements();
  assert((NumElts == 4 || NumElts == 8 || NumElts == 16) &&
         "Unexpected number of vector elements");
  SDValue VMask = getMaskNode(MaskNode, MVT::getVectorVT(MVT::i1, NumElts),
                              Subtarget, DAG, DL);
  SDValue ZeroVector = getZeroVector(VT, Subtarget, DAG, DL);
  SDValue ExpandedVector = IsLeftZeroSide ? V2 : V1;
  return DAG.getSelect(DL, VT, VMask,
                       DAG.getNode(X86ISD::EXPAND, DL, VT, ExpandedVector),
                       ZeroVector);
}

static bool matchVectorShuffleWithUNPCK(MVT VT, SDValue &V1, SDValue &V2,
                                        unsigned &UnpackOpcode, bool IsUnary,
                                        ArrayRef<int> TargetMask, SDLoc &DL,
                                        SelectionDAG &DAG,
                                        const X86Subtarget &Subtarget) {
  int NumElts = VT.getVectorNumElements();

  bool Undef1 = true, Undef2 = true, Zero1 = true, Zero2 = true;
  for (int i = 0; i != NumElts; i += 2) {
    int M1 = TargetMask[i + 0];
    int M2 = TargetMask[i + 1];
    Undef1 &= (SM_SentinelUndef == M1);
    Undef2 &= (SM_SentinelUndef == M2);
    Zero1 &= isUndefOrZero(M1);
    Zero2 &= isUndefOrZero(M2);
  }
  assert(!((Undef1 || Zero1) && (Undef2 || Zero2)) &&
         "Zeroable shuffle detected");

  // Attempt to match the target mask against the unpack lo/hi mask patterns.
  SmallVector<int, 64> Unpckl, Unpckh;
  createUnpackShuffleMask(VT, Unpckl, /* Lo = */ true, IsUnary);
  if (isTargetShuffleEquivalent(TargetMask, Unpckl)) {
    UnpackOpcode = X86ISD::UNPCKL;
    V2 = (Undef2 ? DAG.getUNDEF(VT) : (IsUnary ? V1 : V2));
    V1 = (Undef1 ? DAG.getUNDEF(VT) : V1);
    return true;
  }

  createUnpackShuffleMask(VT, Unpckh, /* Lo = */ false, IsUnary);
  if (isTargetShuffleEquivalent(TargetMask, Unpckh)) {
    UnpackOpcode = X86ISD::UNPCKH;
    V2 = (Undef2 ? DAG.getUNDEF(VT) : (IsUnary ? V1 : V2));
    V1 = (Undef1 ? DAG.getUNDEF(VT) : V1);
    return true;
  }

  // If an unary shuffle, attempt to match as an unpack lo/hi with zero.
  if (IsUnary && (Zero1 || Zero2)) {
    // Don't bother if we can blend instead.
    if ((Subtarget.hasSSE41() || VT == MVT::v2i64 || VT == MVT::v2f64) &&
        isSequentialOrUndefOrZeroInRange(TargetMask, 0, NumElts, 0))
      return false;

    bool MatchLo = true, MatchHi = true;
    for (int i = 0; (i != NumElts) && (MatchLo || MatchHi); ++i) {
      int M = TargetMask[i];

      // Ignore if the input is known to be zero or the index is undef.
      if ((((i & 1) == 0) && Zero1) || (((i & 1) == 1) && Zero2) ||
          (M == SM_SentinelUndef))
        continue;

      MatchLo &= (M == Unpckl[i]);
      MatchHi &= (M == Unpckh[i]);
    }

    if (MatchLo || MatchHi) {
      UnpackOpcode = MatchLo ? X86ISD::UNPCKL : X86ISD::UNPCKH;
      V2 = Zero2 ? getZeroVector(VT, Subtarget, DAG, DL) : V1;
      V1 = Zero1 ? getZeroVector(VT, Subtarget, DAG, DL) : V1;
      return true;
    }
  }

  // If a binary shuffle, commute and try again.
  if (!IsUnary) {
    ShuffleVectorSDNode::commuteMask(Unpckl);
    if (isTargetShuffleEquivalent(TargetMask, Unpckl)) {
      UnpackOpcode = X86ISD::UNPCKL;
      std::swap(V1, V2);
      return true;
    }

    ShuffleVectorSDNode::commuteMask(Unpckh);
    if (isTargetShuffleEquivalent(TargetMask, Unpckh)) {
      UnpackOpcode = X86ISD::UNPCKH;
      std::swap(V1, V2);
      return true;
    }
  }

  return false;
}

// X86 has dedicated unpack instructions that can handle specific blend
// operations: UNPCKH and UNPCKL.
static SDValue lowerVectorShuffleWithUNPCK(const SDLoc &DL, MVT VT,
                                           ArrayRef<int> Mask, SDValue V1,
                                           SDValue V2, SelectionDAG &DAG) {
  SmallVector<int, 8> Unpckl;
  createUnpackShuffleMask(VT, Unpckl, /* Lo = */ true, /* Unary = */ false);
  if (isShuffleEquivalent(V1, V2, Mask, Unpckl))
    return DAG.getNode(X86ISD::UNPCKL, DL, VT, V1, V2);

  SmallVector<int, 8> Unpckh;
  createUnpackShuffleMask(VT, Unpckh, /* Lo = */ false, /* Unary = */ false);
  if (isShuffleEquivalent(V1, V2, Mask, Unpckh))
    return DAG.getNode(X86ISD::UNPCKH, DL, VT, V1, V2);

  // Commute and try again.
  ShuffleVectorSDNode::commuteMask(Unpckl);
  if (isShuffleEquivalent(V1, V2, Mask, Unpckl))
    return DAG.getNode(X86ISD::UNPCKL, DL, VT, V2, V1);

  ShuffleVectorSDNode::commuteMask(Unpckh);
  if (isShuffleEquivalent(V1, V2, Mask, Unpckh))
    return DAG.getNode(X86ISD::UNPCKH, DL, VT, V2, V1);

  return SDValue();
}

// X86 has dedicated pack instructions that can handle specific truncation
// operations: PACKSS and PACKUS.
static bool matchVectorShuffleWithPACK(MVT VT, MVT &SrcVT, SDValue &V1,
                                       SDValue &V2, unsigned &PackOpcode,
                                       ArrayRef<int> TargetMask,
                                       SelectionDAG &DAG,
                                       const X86Subtarget &Subtarget) {
  unsigned NumElts = VT.getVectorNumElements();
  unsigned BitSize = VT.getScalarSizeInBits();
  MVT PackSVT = MVT::getIntegerVT(BitSize * 2);
  MVT PackVT = MVT::getVectorVT(PackSVT, NumElts / 2);

  auto MatchPACK = [&](SDValue N1, SDValue N2) {
    SDValue VV1 = DAG.getBitcast(PackVT, N1);
    SDValue VV2 = DAG.getBitcast(PackVT, N2);
    if ((N1.isUndef() || DAG.ComputeNumSignBits(VV1) > BitSize) &&
        (N2.isUndef() || DAG.ComputeNumSignBits(VV2) > BitSize)) {
      V1 = VV1;
      V2 = VV2;
      SrcVT = PackVT;
      PackOpcode = X86ISD::PACKSS;
      return true;
    }

    if (Subtarget.hasSSE41() || PackSVT == MVT::i16) {
      APInt ZeroMask = APInt::getHighBitsSet(BitSize * 2, BitSize);
      if ((N1.isUndef() || DAG.MaskedValueIsZero(VV1, ZeroMask)) &&
          (N2.isUndef() || DAG.MaskedValueIsZero(VV2, ZeroMask))) {
        V1 = VV1;
        V2 = VV2;
        SrcVT = PackVT;
        PackOpcode = X86ISD::PACKUS;
        return true;
      }
    }

    return false;
  };

  // Try binary shuffle.
  SmallVector<int, 32> BinaryMask;
  createPackShuffleMask(VT, BinaryMask, false);
  if (isTargetShuffleEquivalent(TargetMask, BinaryMask))
    if (MatchPACK(V1, V2))
      return true;

  // Try unary shuffle.
  SmallVector<int, 32> UnaryMask;
  createPackShuffleMask(VT, UnaryMask, true);
  if (isTargetShuffleEquivalent(TargetMask, UnaryMask))
    if (MatchPACK(V1, V1))
      return true;

  return false;
}

static SDValue lowerVectorShuffleWithPACK(const SDLoc &DL, MVT VT,
                                          ArrayRef<int> Mask, SDValue V1,
                                          SDValue V2, SelectionDAG &DAG,
                                          const X86Subtarget &Subtarget) {
  MVT PackVT;
  unsigned PackOpcode;
  if (matchVectorShuffleWithPACK(VT, PackVT, V1, V2, PackOpcode, Mask, DAG,
                                 Subtarget))
    return DAG.getNode(PackOpcode, DL, VT, DAG.getBitcast(PackVT, V1),
                       DAG.getBitcast(PackVT, V2));

  return SDValue();
}

/// \brief Try to emit a bitmask instruction for a shuffle.
///
/// This handles cases where we can model a blend exactly as a bitmask due to
/// one of the inputs being zeroable.
static SDValue lowerVectorShuffleAsBitMask(const SDLoc &DL, MVT VT, SDValue V1,
                                           SDValue V2, ArrayRef<int> Mask,
                                           const APInt &Zeroable,
                                           SelectionDAG &DAG) {
  assert(!VT.isFloatingPoint() && "Floating point types are not supported");
  MVT EltVT = VT.getVectorElementType();
  SDValue Zero = DAG.getConstant(0, DL, EltVT);
  SDValue AllOnes = DAG.getAllOnesConstant(DL, EltVT);
  SmallVector<SDValue, 16> VMaskOps(Mask.size(), Zero);
  SDValue V;
  for (int i = 0, Size = Mask.size(); i < Size; ++i) {
    if (Zeroable[i])
      continue;
    if (Mask[i] % Size != i)
      return SDValue(); // Not a blend.
    if (!V)
      V = Mask[i] < Size ? V1 : V2;
    else if (V != (Mask[i] < Size ? V1 : V2))
      return SDValue(); // Can only let one input through the mask.

    VMaskOps[i] = AllOnes;
  }
  if (!V)
    return SDValue(); // No non-zeroable elements!

  SDValue VMask = DAG.getBuildVector(VT, DL, VMaskOps);
  return DAG.getNode(ISD::AND, DL, VT, V, VMask);
}

/// \brief Try to emit a blend instruction for a shuffle using bit math.
///
/// This is used as a fallback approach when first class blend instructions are
/// unavailable. Currently it is only suitable for integer vectors, but could
/// be generalized for floating point vectors if desirable.
static SDValue lowerVectorShuffleAsBitBlend(const SDLoc &DL, MVT VT, SDValue V1,
                                            SDValue V2, ArrayRef<int> Mask,
                                            SelectionDAG &DAG) {
  assert(VT.isInteger() && "Only supports integer vector types!");
  MVT EltVT = VT.getVectorElementType();
  SDValue Zero = DAG.getConstant(0, DL, EltVT);
  SDValue AllOnes = DAG.getAllOnesConstant(DL, EltVT);
  SmallVector<SDValue, 16> MaskOps;
  for (int i = 0, Size = Mask.size(); i < Size; ++i) {
    if (Mask[i] >= 0 && Mask[i] != i && Mask[i] != i + Size)
      return SDValue(); // Shuffled input!
    MaskOps.push_back(Mask[i] < Size ? AllOnes : Zero);
  }

  SDValue V1Mask = DAG.getBuildVector(VT, DL, MaskOps);
  V1 = DAG.getNode(ISD::AND, DL, VT, V1, V1Mask);
  // We have to cast V2 around.
  MVT MaskVT = MVT::getVectorVT(MVT::i64, VT.getSizeInBits() / 64);
  V2 = DAG.getBitcast(VT, DAG.getNode(X86ISD::ANDNP, DL, MaskVT,
                                      DAG.getBitcast(MaskVT, V1Mask),
                                      DAG.getBitcast(MaskVT, V2)));
  return DAG.getNode(ISD::OR, DL, VT, V1, V2);
}

static SDValue getVectorMaskingNode(SDValue Op, SDValue Mask,
                                    SDValue PreservedSrc,
                                    const X86Subtarget &Subtarget,
                                    SelectionDAG &DAG);

static bool matchVectorShuffleAsBlend(SDValue V1, SDValue V2,
                                      MutableArrayRef<int> TargetMask,
                                      bool &ForceV1Zero, bool &ForceV2Zero,
                                      uint64_t &BlendMask) {
  bool V1IsZeroOrUndef =
      V1.isUndef() || ISD::isBuildVectorAllZeros(V1.getNode());
  bool V2IsZeroOrUndef =
      V2.isUndef() || ISD::isBuildVectorAllZeros(V2.getNode());

  BlendMask = 0;
  ForceV1Zero = false, ForceV2Zero = false;
  assert(TargetMask.size() <= 64 && "Shuffle mask too big for blend mask");

  // Attempt to generate the binary blend mask. If an input is zero then
  // we can use any lane.
  // TODO: generalize the zero matching to any scalar like isShuffleEquivalent.
  for (int i = 0, Size = TargetMask.size(); i < Size; ++i) {
    int M = TargetMask[i];
    if (M == SM_SentinelUndef)
      continue;
    if (M == i)
      continue;
    if (M == i + Size) {
      BlendMask |= 1ull << i;
      continue;
    }
    if (M == SM_SentinelZero) {
      if (V1IsZeroOrUndef) {
        ForceV1Zero = true;
        TargetMask[i] = i;
        continue;
      }
      if (V2IsZeroOrUndef) {
        ForceV2Zero = true;
        BlendMask |= 1ull << i;
        TargetMask[i] = i + Size;
        continue;
      }
    }
    return false;
  }
  return true;
}

static uint64_t scaleVectorShuffleBlendMask(uint64_t BlendMask, int Size,
                                            int Scale) {
  uint64_t ScaledMask = 0;
  for (int i = 0; i != Size; ++i)
    if (BlendMask & (1ull << i))
      ScaledMask |= ((1ull << Scale) - 1) << (i * Scale);
  return ScaledMask;
}

/// \brief Try to emit a blend instruction for a shuffle.
///
/// This doesn't do any checks for the availability of instructions for blending
/// these values. It relies on the availability of the X86ISD::BLENDI pattern to
/// be matched in the backend with the type given. What it does check for is
/// that the shuffle mask is a blend, or convertible into a blend with zero.
static SDValue lowerVectorShuffleAsBlend(const SDLoc &DL, MVT VT, SDValue V1,
                                         SDValue V2, ArrayRef<int> Original,
                                         const APInt &Zeroable,
                                         const X86Subtarget &Subtarget,
                                         SelectionDAG &DAG) {
  SmallVector<int, 64> Mask = createTargetShuffleMask(Original, Zeroable);

  uint64_t BlendMask = 0;
  bool ForceV1Zero = false, ForceV2Zero = false;
  if (!matchVectorShuffleAsBlend(V1, V2, Mask, ForceV1Zero, ForceV2Zero,
                                 BlendMask))
    return SDValue();

  // Create a REAL zero vector - ISD::isBuildVectorAllZeros allows UNDEFs.
  if (ForceV1Zero)
    V1 = getZeroVector(VT, Subtarget, DAG, DL);
  if (ForceV2Zero)
    V2 = getZeroVector(VT, Subtarget, DAG, DL);

  switch (VT.SimpleTy) {
  case MVT::v2f64:
  case MVT::v4f32:
  case MVT::v4f64:
  case MVT::v8f32:
    return DAG.getNode(X86ISD::BLENDI, DL, VT, V1, V2,
                       DAG.getConstant(BlendMask, DL, MVT::i8));

  case MVT::v4i64:
  case MVT::v8i32:
    assert(Subtarget.hasAVX2() && "256-bit integer blends require AVX2!");
    LLVM_FALLTHROUGH;
  case MVT::v2i64:
  case MVT::v4i32:
    // If we have AVX2 it is faster to use VPBLENDD when the shuffle fits into
    // that instruction.
    if (Subtarget.hasAVX2()) {
      // Scale the blend by the number of 32-bit dwords per element.
      int Scale =  VT.getScalarSizeInBits() / 32;
      BlendMask = scaleVectorShuffleBlendMask(BlendMask, Mask.size(), Scale);
      MVT BlendVT = VT.getSizeInBits() > 128 ? MVT::v8i32 : MVT::v4i32;
      V1 = DAG.getBitcast(BlendVT, V1);
      V2 = DAG.getBitcast(BlendVT, V2);
      return DAG.getBitcast(
          VT, DAG.getNode(X86ISD::BLENDI, DL, BlendVT, V1, V2,
                          DAG.getConstant(BlendMask, DL, MVT::i8)));
    }
    LLVM_FALLTHROUGH;
  case MVT::v8i16: {
    // For integer shuffles we need to expand the mask and cast the inputs to
    // v8i16s prior to blending.
    int Scale = 8 / VT.getVectorNumElements();
    BlendMask = scaleVectorShuffleBlendMask(BlendMask, Mask.size(), Scale);
    V1 = DAG.getBitcast(MVT::v8i16, V1);
    V2 = DAG.getBitcast(MVT::v8i16, V2);
    return DAG.getBitcast(VT,
                          DAG.getNode(X86ISD::BLENDI, DL, MVT::v8i16, V1, V2,
                                      DAG.getConstant(BlendMask, DL, MVT::i8)));
  }

  case MVT::v16i16: {
    assert(Subtarget.hasAVX2() && "256-bit integer blends require AVX2!");
    SmallVector<int, 8> RepeatedMask;
    if (is128BitLaneRepeatedShuffleMask(MVT::v16i16, Mask, RepeatedMask)) {
      // We can lower these with PBLENDW which is mirrored across 128-bit lanes.
      assert(RepeatedMask.size() == 8 && "Repeated mask size doesn't match!");
      BlendMask = 0;
      for (int i = 0; i < 8; ++i)
        if (RepeatedMask[i] >= 8)
          BlendMask |= 1ull << i;
      return DAG.getNode(X86ISD::BLENDI, DL, MVT::v16i16, V1, V2,
                         DAG.getConstant(BlendMask, DL, MVT::i8));
    }
    LLVM_FALLTHROUGH;
  }
  case MVT::v16i8:
  case MVT::v32i8: {
    assert((VT.is128BitVector() || Subtarget.hasAVX2()) &&
           "256-bit byte-blends require AVX2 support!");

    if (Subtarget.hasBWI() && Subtarget.hasVLX()) {
      MVT IntegerType =
          MVT::getIntegerVT(std::max((int)VT.getVectorNumElements(), 8));
      SDValue MaskNode = DAG.getConstant(BlendMask, DL, IntegerType);
      return getVectorMaskingNode(V2, MaskNode, V1, Subtarget, DAG);
    }

    // Attempt to lower to a bitmask if we can. VPAND is faster than VPBLENDVB.
    if (SDValue Masked =
            lowerVectorShuffleAsBitMask(DL, VT, V1, V2, Mask, Zeroable, DAG))
      return Masked;

    // Scale the blend by the number of bytes per element.
    int Scale = VT.getScalarSizeInBits() / 8;

    // This form of blend is always done on bytes. Compute the byte vector
    // type.
    MVT BlendVT = MVT::getVectorVT(MVT::i8, VT.getSizeInBits() / 8);

    // Compute the VSELECT mask. Note that VSELECT is really confusing in the
    // mix of LLVM's code generator and the x86 backend. We tell the code
    // generator that boolean values in the elements of an x86 vector register
    // are -1 for true and 0 for false. We then use the LLVM semantics of 'true'
    // mapping a select to operand #1, and 'false' mapping to operand #2. The
    // reality in x86 is that vector masks (pre-AVX-512) use only the high bit
    // of the element (the remaining are ignored) and 0 in that high bit would
    // mean operand #1 while 1 in the high bit would mean operand #2. So while
    // the LLVM model for boolean values in vector elements gets the relevant
    // bit set, it is set backwards and over constrained relative to x86's
    // actual model.
    SmallVector<SDValue, 32> VSELECTMask;
    for (int i = 0, Size = Mask.size(); i < Size; ++i)
      for (int j = 0; j < Scale; ++j)
        VSELECTMask.push_back(
            Mask[i] < 0 ? DAG.getUNDEF(MVT::i8)
                        : DAG.getConstant(Mask[i] < Size ? -1 : 0, DL,
                                          MVT::i8));

    V1 = DAG.getBitcast(BlendVT, V1);
    V2 = DAG.getBitcast(BlendVT, V2);
    return DAG.getBitcast(
        VT,
        DAG.getSelect(DL, BlendVT, DAG.getBuildVector(BlendVT, DL, VSELECTMask),
                      V1, V2));
  }
  case MVT::v16f32:
  case MVT::v8f64:
  case MVT::v8i64:
  case MVT::v16i32:
  case MVT::v32i16:
  case MVT::v64i8: {
    MVT IntegerType =
        MVT::getIntegerVT(std::max((int)VT.getVectorNumElements(), 8));
    SDValue MaskNode = DAG.getConstant(BlendMask, DL, IntegerType);
    return getVectorMaskingNode(V2, MaskNode, V1, Subtarget, DAG);
  }
  default:
    llvm_unreachable("Not a supported integer vector type!");
  }
}

/// \brief Try to lower as a blend of elements from two inputs followed by
/// a single-input permutation.
///
/// This matches the pattern where we can blend elements from two inputs and
/// then reduce the shuffle to a single-input permutation.
static SDValue lowerVectorShuffleAsBlendAndPermute(const SDLoc &DL, MVT VT,
                                                   SDValue V1, SDValue V2,
                                                   ArrayRef<int> Mask,
                                                   SelectionDAG &DAG) {
  // We build up the blend mask while checking whether a blend is a viable way
  // to reduce the shuffle.
  SmallVector<int, 32> BlendMask(Mask.size(), -1);
  SmallVector<int, 32> PermuteMask(Mask.size(), -1);

  for (int i = 0, Size = Mask.size(); i < Size; ++i) {
    if (Mask[i] < 0)
      continue;

    assert(Mask[i] < Size * 2 && "Shuffle input is out of bounds.");

    if (BlendMask[Mask[i] % Size] < 0)
      BlendMask[Mask[i] % Size] = Mask[i];
    else if (BlendMask[Mask[i] % Size] != Mask[i])
      return SDValue(); // Can't blend in the needed input!

    PermuteMask[i] = Mask[i] % Size;
  }

  SDValue V = DAG.getVectorShuffle(VT, DL, V1, V2, BlendMask);
  return DAG.getVectorShuffle(VT, DL, V, DAG.getUNDEF(VT), PermuteMask);
}

/// \brief Generic routine to decompose a shuffle and blend into independent
/// blends and permutes.
///
/// This matches the extremely common pattern for handling combined
/// shuffle+blend operations on newer X86 ISAs where we have very fast blend
/// operations. It will try to pick the best arrangement of shuffles and
/// blends.
static SDValue lowerVectorShuffleAsDecomposedShuffleBlend(const SDLoc &DL,
                                                          MVT VT, SDValue V1,
                                                          SDValue V2,
                                                          ArrayRef<int> Mask,
                                                          SelectionDAG &DAG) {
  // Shuffle the input elements into the desired positions in V1 and V2 and
  // blend them together.
  SmallVector<int, 32> V1Mask(Mask.size(), -1);
  SmallVector<int, 32> V2Mask(Mask.size(), -1);
  SmallVector<int, 32> BlendMask(Mask.size(), -1);
  for (int i = 0, Size = Mask.size(); i < Size; ++i)
    if (Mask[i] >= 0 && Mask[i] < Size) {
      V1Mask[i] = Mask[i];
      BlendMask[i] = i;
    } else if (Mask[i] >= Size) {
      V2Mask[i] = Mask[i] - Size;
      BlendMask[i] = i + Size;
    }

  // Try to lower with the simpler initial blend strategy unless one of the
  // input shuffles would be a no-op. We prefer to shuffle inputs as the
  // shuffle may be able to fold with a load or other benefit. However, when
  // we'll have to do 2x as many shuffles in order to achieve this, blending
  // first is a better strategy.
  if (!isNoopShuffleMask(V1Mask) && !isNoopShuffleMask(V2Mask))
    if (SDValue BlendPerm =
            lowerVectorShuffleAsBlendAndPermute(DL, VT, V1, V2, Mask, DAG))
      return BlendPerm;

  V1 = DAG.getVectorShuffle(VT, DL, V1, DAG.getUNDEF(VT), V1Mask);
  V2 = DAG.getVectorShuffle(VT, DL, V2, DAG.getUNDEF(VT), V2Mask);
  return DAG.getVectorShuffle(VT, DL, V1, V2, BlendMask);
}

/// \brief Try to lower a vector shuffle as a rotation.
///
/// This is used for support PALIGNR for SSSE3 or VALIGND/Q for AVX512.
static int matchVectorShuffleAsRotate(SDValue &V1, SDValue &V2,
                                      ArrayRef<int> Mask) {
  int NumElts = Mask.size();

  // We need to detect various ways of spelling a rotation:
  //   [11, 12, 13, 14, 15,  0,  1,  2]
  //   [-1, 12, 13, 14, -1, -1,  1, -1]
  //   [-1, -1, -1, -1, -1, -1,  1,  2]
  //   [ 3,  4,  5,  6,  7,  8,  9, 10]
  //   [-1,  4,  5,  6, -1, -1,  9, -1]
  //   [-1,  4,  5,  6, -1, -1, -1, -1]
  int Rotation = 0;
  SDValue Lo, Hi;
  for (int i = 0; i < NumElts; ++i) {
    int M = Mask[i];
    assert((M == SM_SentinelUndef || (0 <= M && M < (2*NumElts))) &&
           "Unexpected mask index.");
    if (M < 0)
      continue;

    // Determine where a rotated vector would have started.
    int StartIdx = i - (M % NumElts);
    if (StartIdx == 0)
      // The identity rotation isn't interesting, stop.
      return -1;

    // If we found the tail of a vector the rotation must be the missing
    // front. If we found the head of a vector, it must be how much of the
    // head.
    int CandidateRotation = StartIdx < 0 ? -StartIdx : NumElts - StartIdx;

    if (Rotation == 0)
      Rotation = CandidateRotation;
    else if (Rotation != CandidateRotation)
      // The rotations don't match, so we can't match this mask.
      return -1;

    // Compute which value this mask is pointing at.
    SDValue MaskV = M < NumElts ? V1 : V2;

    // Compute which of the two target values this index should be assigned
    // to. This reflects whether the high elements are remaining or the low
    // elements are remaining.
    SDValue &TargetV = StartIdx < 0 ? Hi : Lo;

    // Either set up this value if we've not encountered it before, or check
    // that it remains consistent.
    if (!TargetV)
      TargetV = MaskV;
    else if (TargetV != MaskV)
      // This may be a rotation, but it pulls from the inputs in some
      // unsupported interleaving.
      return -1;
  }

  // Check that we successfully analyzed the mask, and normalize the results.
  assert(Rotation != 0 && "Failed to locate a viable rotation!");
  assert((Lo || Hi) && "Failed to find a rotated input vector!");
  if (!Lo)
    Lo = Hi;
  else if (!Hi)
    Hi = Lo;

  V1 = Lo;
  V2 = Hi;

  return Rotation;
}

/// \brief Try to lower a vector shuffle as a byte rotation.
///
/// SSSE3 has a generic PALIGNR instruction in x86 that will do an arbitrary
/// byte-rotation of the concatenation of two vectors; pre-SSSE3 can use
/// a PSRLDQ/PSLLDQ/POR pattern to get a similar effect. This routine will
/// try to generically lower a vector shuffle through such an pattern. It
/// does not check for the profitability of lowering either as PALIGNR or
/// PSRLDQ/PSLLDQ/POR, only whether the mask is valid to lower in that form.
/// This matches shuffle vectors that look like:
///
///   v8i16 [11, 12, 13, 14, 15, 0, 1, 2]
///
/// Essentially it concatenates V1 and V2, shifts right by some number of
/// elements, and takes the low elements as the result. Note that while this is
/// specified as a *right shift* because x86 is little-endian, it is a *left
/// rotate* of the vector lanes.
static int matchVectorShuffleAsByteRotate(MVT VT, SDValue &V1, SDValue &V2,
                                          ArrayRef<int> Mask) {
  // Don't accept any shuffles with zero elements.
  if (any_of(Mask, [](int M) { return M == SM_SentinelZero; }))
    return -1;

  // PALIGNR works on 128-bit lanes.
  SmallVector<int, 16> RepeatedMask;
  if (!is128BitLaneRepeatedShuffleMask(VT, Mask, RepeatedMask))
    return -1;

  int Rotation = matchVectorShuffleAsRotate(V1, V2, RepeatedMask);
  if (Rotation <= 0)
    return -1;

  // PALIGNR rotates bytes, so we need to scale the
  // rotation based on how many bytes are in the vector lane.
  int NumElts = RepeatedMask.size();
  int Scale = 16 / NumElts;
  return Rotation * Scale;
}

static SDValue lowerVectorShuffleAsByteRotate(const SDLoc &DL, MVT VT,
                                              SDValue V1, SDValue V2,
                                              ArrayRef<int> Mask,
                                              const X86Subtarget &Subtarget,
                                              SelectionDAG &DAG) {
  assert(!isNoopShuffleMask(Mask) && "We shouldn't lower no-op shuffles!");

  SDValue Lo = V1, Hi = V2;
  int ByteRotation = matchVectorShuffleAsByteRotate(VT, Lo, Hi, Mask);
  if (ByteRotation <= 0)
    return SDValue();

  // Cast the inputs to i8 vector of correct length to match PALIGNR or
  // PSLLDQ/PSRLDQ.
  MVT ByteVT = MVT::getVectorVT(MVT::i8, VT.getSizeInBits() / 8);
  Lo = DAG.getBitcast(ByteVT, Lo);
  Hi = DAG.getBitcast(ByteVT, Hi);

  // SSSE3 targets can use the palignr instruction.
  if (Subtarget.hasSSSE3()) {
    assert((!VT.is512BitVector() || Subtarget.hasBWI()) &&
           "512-bit PALIGNR requires BWI instructions");
    return DAG.getBitcast(
        VT, DAG.getNode(X86ISD::PALIGNR, DL, ByteVT, Lo, Hi,
                        DAG.getConstant(ByteRotation, DL, MVT::i8)));
  }

  assert(VT.is128BitVector() &&
         "Rotate-based lowering only supports 128-bit lowering!");
  assert(Mask.size() <= 16 &&
         "Can shuffle at most 16 bytes in a 128-bit vector!");
  assert(ByteVT == MVT::v16i8 &&
         "SSE2 rotate lowering only needed for v16i8!");

  // Default SSE2 implementation
  int LoByteShift = 16 - ByteRotation;
  int HiByteShift = ByteRotation;

  SDValue LoShift = DAG.getNode(X86ISD::VSHLDQ, DL, MVT::v16i8, Lo,
                                DAG.getConstant(LoByteShift, DL, MVT::i8));
  SDValue HiShift = DAG.getNode(X86ISD::VSRLDQ, DL, MVT::v16i8, Hi,
                                DAG.getConstant(HiByteShift, DL, MVT::i8));
  return DAG.getBitcast(VT,
                        DAG.getNode(ISD::OR, DL, MVT::v16i8, LoShift, HiShift));
}

/// \brief Try to lower a vector shuffle as a dword/qword rotation.
///
/// AVX512 has a VALIGND/VALIGNQ instructions that will do an arbitrary
/// rotation of the concatenation of two vectors; This routine will
/// try to generically lower a vector shuffle through such an pattern.
///
/// Essentially it concatenates V1 and V2, shifts right by some number of
/// elements, and takes the low elements as the result. Note that while this is
/// specified as a *right shift* because x86 is little-endian, it is a *left
/// rotate* of the vector lanes.
static SDValue lowerVectorShuffleAsRotate(const SDLoc &DL, MVT VT,
                                          SDValue V1, SDValue V2,
                                          ArrayRef<int> Mask,
                                          const X86Subtarget &Subtarget,
                                          SelectionDAG &DAG) {
  assert((VT.getScalarType() == MVT::i32 || VT.getScalarType() == MVT::i64) &&
         "Only 32-bit and 64-bit elements are supported!");

  // 128/256-bit vectors are only supported with VLX.
  assert((Subtarget.hasVLX() || (!VT.is128BitVector() && !VT.is256BitVector()))
         && "VLX required for 128/256-bit vectors");

  SDValue Lo = V1, Hi = V2;
  int Rotation = matchVectorShuffleAsRotate(Lo, Hi, Mask);
  if (Rotation <= 0)
    return SDValue();

  return DAG.getNode(X86ISD::VALIGN, DL, VT, Lo, Hi,
                     DAG.getConstant(Rotation, DL, MVT::i8));
}

/// \brief Try to lower a vector shuffle as a bit shift (shifts in zeros).
///
/// Attempts to match a shuffle mask against the PSLL(W/D/Q/DQ) and
/// PSRL(W/D/Q/DQ) SSE2 and AVX2 logical bit-shift instructions. The function
/// matches elements from one of the input vectors shuffled to the left or
/// right with zeroable elements 'shifted in'. It handles both the strictly
/// bit-wise element shifts and the byte shift across an entire 128-bit double
/// quad word lane.
///
/// PSHL : (little-endian) left bit shift.
/// [ zz, 0, zz,  2 ]
/// [ -1, 4, zz, -1 ]
/// PSRL : (little-endian) right bit shift.
/// [  1, zz,  3, zz]
/// [ -1, -1,  7, zz]
/// PSLLDQ : (little-endian) left byte shift
/// [ zz,  0,  1,  2,  3,  4,  5,  6]
/// [ zz, zz, -1, -1,  2,  3,  4, -1]
/// [ zz, zz, zz, zz, zz, zz, -1,  1]
/// PSRLDQ : (little-endian) right byte shift
/// [  5, 6,  7, zz, zz, zz, zz, zz]
/// [ -1, 5,  6,  7, zz, zz, zz, zz]
/// [  1, 2, -1, -1, -1, -1, zz, zz]
static int matchVectorShuffleAsShift(MVT &ShiftVT, unsigned &Opcode,
                                     unsigned ScalarSizeInBits,
                                     ArrayRef<int> Mask, int MaskOffset,
                                     const APInt &Zeroable,
                                     const X86Subtarget &Subtarget) {
  int Size = Mask.size();
  unsigned SizeInBits = Size * ScalarSizeInBits;

  auto CheckZeros = [&](int Shift, int Scale, bool Left) {
    for (int i = 0; i < Size; i += Scale)
      for (int j = 0; j < Shift; ++j)
        if (!Zeroable[i + j + (Left ? 0 : (Scale - Shift))])
          return false;

    return true;
  };

  auto MatchShift = [&](int Shift, int Scale, bool Left) {
    for (int i = 0; i != Size; i += Scale) {
      unsigned Pos = Left ? i + Shift : i;
      unsigned Low = Left ? i : i + Shift;
      unsigned Len = Scale - Shift;
      if (!isSequentialOrUndefInRange(Mask, Pos, Len, Low + MaskOffset))
        return -1;
    }

    int ShiftEltBits = ScalarSizeInBits * Scale;
    bool ByteShift = ShiftEltBits > 64;
    Opcode = Left ? (ByteShift ? X86ISD::VSHLDQ : X86ISD::VSHLI)
                  : (ByteShift ? X86ISD::VSRLDQ : X86ISD::VSRLI);
    int ShiftAmt = Shift * ScalarSizeInBits / (ByteShift ? 8 : 1);

    // Normalize the scale for byte shifts to still produce an i64 element
    // type.
    Scale = ByteShift ? Scale / 2 : Scale;

    // We need to round trip through the appropriate type for the shift.
    MVT ShiftSVT = MVT::getIntegerVT(ScalarSizeInBits * Scale);
    ShiftVT = ByteShift ? MVT::getVectorVT(MVT::i8, SizeInBits / 8)
                        : MVT::getVectorVT(ShiftSVT, Size / Scale);
    return (int)ShiftAmt;
  };

  // SSE/AVX supports logical shifts up to 64-bit integers - so we can just
  // keep doubling the size of the integer elements up to that. We can
  // then shift the elements of the integer vector by whole multiples of
  // their width within the elements of the larger integer vector. Test each
  // multiple to see if we can find a match with the moved element indices
  // and that the shifted in elements are all zeroable.
  unsigned MaxWidth = ((SizeInBits == 512) && !Subtarget.hasBWI() ? 64 : 128);
  for (int Scale = 2; Scale * ScalarSizeInBits <= MaxWidth; Scale *= 2)
    for (int Shift = 1; Shift != Scale; ++Shift)
      for (bool Left : {true, false})
        if (CheckZeros(Shift, Scale, Left)) {
          int ShiftAmt = MatchShift(Shift, Scale, Left);
          if (0 < ShiftAmt)
            return ShiftAmt;
        }

  // no match
  return -1;
}

static SDValue lowerVectorShuffleAsShift(const SDLoc &DL, MVT VT, SDValue V1,
                                         SDValue V2, ArrayRef<int> Mask,
                                         const APInt &Zeroable,
                                         const X86Subtarget &Subtarget,
                                         SelectionDAG &DAG) {
  int Size = Mask.size();
  assert(Size == (int)VT.getVectorNumElements() && "Unexpected mask size");

  MVT ShiftVT;
  SDValue V = V1;
  unsigned Opcode;

  // Try to match shuffle against V1 shift.
  int ShiftAmt = matchVectorShuffleAsShift(
      ShiftVT, Opcode, VT.getScalarSizeInBits(), Mask, 0, Zeroable, Subtarget);

  // If V1 failed, try to match shuffle against V2 shift.
  if (ShiftAmt < 0) {
    ShiftAmt =
        matchVectorShuffleAsShift(ShiftVT, Opcode, VT.getScalarSizeInBits(),
                                  Mask, Size, Zeroable, Subtarget);
    V = V2;
  }

  if (ShiftAmt < 0)
    return SDValue();

  assert(DAG.getTargetLoweringInfo().isTypeLegal(ShiftVT) &&
         "Illegal integer vector type");
  V = DAG.getBitcast(ShiftVT, V);
  V = DAG.getNode(Opcode, DL, ShiftVT, V,
                  DAG.getConstant(ShiftAmt, DL, MVT::i8));
  return DAG.getBitcast(VT, V);
}

// EXTRQ: Extract Len elements from lower half of source, starting at Idx.
// Remainder of lower half result is zero and upper half is all undef.
static bool matchVectorShuffleAsEXTRQ(MVT VT, SDValue &V1, SDValue &V2,
                                      ArrayRef<int> Mask, uint64_t &BitLen,
                                      uint64_t &BitIdx, const APInt &Zeroable) {
  int Size = Mask.size();
  int HalfSize = Size / 2;
  assert(Size == (int)VT.getVectorNumElements() && "Unexpected mask size");
  assert(!Zeroable.isAllOnesValue() && "Fully zeroable shuffle mask");

  // Upper half must be undefined.
  if (!isUndefInRange(Mask, HalfSize, HalfSize))
    return false;

  // Determine the extraction length from the part of the
  // lower half that isn't zeroable.
  int Len = HalfSize;
  for (; Len > 0; --Len)
    if (!Zeroable[Len - 1])
      break;
  assert(Len > 0 && "Zeroable shuffle mask");

  // Attempt to match first Len sequential elements from the lower half.
  SDValue Src;
  int Idx = -1;
  for (int i = 0; i != Len; ++i) {
    int M = Mask[i];
    if (M == SM_SentinelUndef)
      continue;
    SDValue &V = (M < Size ? V1 : V2);
    M = M % Size;

    // The extracted elements must start at a valid index and all mask
    // elements must be in the lower half.
    if (i > M || M >= HalfSize)
      return false;

    if (Idx < 0 || (Src == V && Idx == (M - i))) {
      Src = V;
      Idx = M - i;
      continue;
    }
    return false;
  }

  if (!Src || Idx < 0)
    return false;

  assert((Idx + Len) <= HalfSize && "Illegal extraction mask");
  BitLen = (Len * VT.getScalarSizeInBits()) & 0x3f;
  BitIdx = (Idx * VT.getScalarSizeInBits()) & 0x3f;
  V1 = Src;
  return true;
}

// INSERTQ: Extract lowest Len elements from lower half of second source and
// insert over first source, starting at Idx.
// { A[0], .., A[Idx-1], B[0], .., B[Len-1], A[Idx+Len], .., UNDEF, ... }
static bool matchVectorShuffleAsINSERTQ(MVT VT, SDValue &V1, SDValue &V2,
                                        ArrayRef<int> Mask, uint64_t &BitLen,
                                        uint64_t &BitIdx) {
  int Size = Mask.size();
  int HalfSize = Size / 2;
  assert(Size == (int)VT.getVectorNumElements() && "Unexpected mask size");

  // Upper half must be undefined.
  if (!isUndefInRange(Mask, HalfSize, HalfSize))
    return false;

  for (int Idx = 0; Idx != HalfSize; ++Idx) {
    SDValue Base;

    // Attempt to match first source from mask before insertion point.
    if (isUndefInRange(Mask, 0, Idx)) {
      /* EMPTY */
    } else if (isSequentialOrUndefInRange(Mask, 0, Idx, 0)) {
      Base = V1;
    } else if (isSequentialOrUndefInRange(Mask, 0, Idx, Size)) {
      Base = V2;
    } else {
      continue;
    }

    // Extend the extraction length looking to match both the insertion of
    // the second source and the remaining elements of the first.
    for (int Hi = Idx + 1; Hi <= HalfSize; ++Hi) {
      SDValue Insert;
      int Len = Hi - Idx;

      // Match insertion.
      if (isSequentialOrUndefInRange(Mask, Idx, Len, 0)) {
        Insert = V1;
      } else if (isSequentialOrUndefInRange(Mask, Idx, Len, Size)) {
        Insert = V2;
      } else {
        continue;
      }

      // Match the remaining elements of the lower half.
      if (isUndefInRange(Mask, Hi, HalfSize - Hi)) {
        /* EMPTY */
      } else if ((!Base || (Base == V1)) &&
                 isSequentialOrUndefInRange(Mask, Hi, HalfSize - Hi, Hi)) {
        Base = V1;
      } else if ((!Base || (Base == V2)) &&
                 isSequentialOrUndefInRange(Mask, Hi, HalfSize - Hi,
                                            Size + Hi)) {
        Base = V2;
      } else {
        continue;
      }

      BitLen = (Len * VT.getScalarSizeInBits()) & 0x3f;
      BitIdx = (Idx * VT.getScalarSizeInBits()) & 0x3f;
      V1 = Base;
      V2 = Insert;
      return true;
    }
  }

  return false;
}

/// \brief Try to lower a vector shuffle using SSE4a EXTRQ/INSERTQ.
static SDValue lowerVectorShuffleWithSSE4A(const SDLoc &DL, MVT VT, SDValue V1,
                                           SDValue V2, ArrayRef<int> Mask,
                                           const APInt &Zeroable,
                                           SelectionDAG &DAG) {
  uint64_t BitLen, BitIdx;
  if (matchVectorShuffleAsEXTRQ(VT, V1, V2, Mask, BitLen, BitIdx, Zeroable))
    return DAG.getNode(X86ISD::EXTRQI, DL, VT, V1,
                       DAG.getConstant(BitLen, DL, MVT::i8),
                       DAG.getConstant(BitIdx, DL, MVT::i8));

  if (matchVectorShuffleAsINSERTQ(VT, V1, V2, Mask, BitLen, BitIdx))
    return DAG.getNode(X86ISD::INSERTQI, DL, VT, V1 ? V1 : DAG.getUNDEF(VT),
                       V2 ? V2 : DAG.getUNDEF(VT),
                       DAG.getConstant(BitLen, DL, MVT::i8),
                       DAG.getConstant(BitIdx, DL, MVT::i8));

  return SDValue();
}

/// \brief Lower a vector shuffle as a zero or any extension.
///
/// Given a specific number of elements, element bit width, and extension
/// stride, produce either a zero or any extension based on the available
/// features of the subtarget. The extended elements are consecutive and
/// begin and can start from an offsetted element index in the input; to
/// avoid excess shuffling the offset must either being in the bottom lane
/// or at the start of a higher lane. All extended elements must be from
/// the same lane.
static SDValue lowerVectorShuffleAsSpecificZeroOrAnyExtend(
    const SDLoc &DL, MVT VT, int Scale, int Offset, bool AnyExt, SDValue InputV,
    ArrayRef<int> Mask, const X86Subtarget &Subtarget, SelectionDAG &DAG) {
  assert(Scale > 1 && "Need a scale to extend.");
  int EltBits = VT.getScalarSizeInBits();
  int NumElements = VT.getVectorNumElements();
  int NumEltsPerLane = 128 / EltBits;
  int OffsetLane = Offset / NumEltsPerLane;
  assert((EltBits == 8 || EltBits == 16 || EltBits == 32) &&
         "Only 8, 16, and 32 bit elements can be extended.");
  assert(Scale * EltBits <= 64 && "Cannot zero extend past 64 bits.");
  assert(0 <= Offset && "Extension offset must be positive.");
  assert((Offset < NumEltsPerLane || Offset % NumEltsPerLane == 0) &&
         "Extension offset must be in the first lane or start an upper lane.");

  // Check that an index is in same lane as the base offset.
  auto SafeOffset = [&](int Idx) {
    return OffsetLane == (Idx / NumEltsPerLane);
  };

  // Shift along an input so that the offset base moves to the first element.
  auto ShuffleOffset = [&](SDValue V) {
    if (!Offset)
      return V;

    SmallVector<int, 8> ShMask((unsigned)NumElements, -1);
    for (int i = 0; i * Scale < NumElements; ++i) {
      int SrcIdx = i + Offset;
      ShMask[i] = SafeOffset(SrcIdx) ? SrcIdx : -1;
    }
    return DAG.getVectorShuffle(VT, DL, V, DAG.getUNDEF(VT), ShMask);
  };

  // Found a valid zext mask! Try various lowering strategies based on the
  // input type and available ISA extensions.
  if (Subtarget.hasSSE41()) {
    // Not worth offsetting 128-bit vectors if scale == 2, a pattern using
    // PUNPCK will catch this in a later shuffle match.
    if (Offset && Scale == 2 && VT.is128BitVector())
      return SDValue();
    MVT ExtVT = MVT::getVectorVT(MVT::getIntegerVT(EltBits * Scale),
                                 NumElements / Scale);
    InputV = ShuffleOffset(InputV);
    InputV = getExtendInVec(X86ISD::VZEXT, DL, ExtVT, InputV, DAG);
    return DAG.getBitcast(VT, InputV);
  }

  assert(VT.is128BitVector() && "Only 128-bit vectors can be extended.");

  // For any extends we can cheat for larger element sizes and use shuffle
  // instructions that can fold with a load and/or copy.
  if (AnyExt && EltBits == 32) {
    int PSHUFDMask[4] = {Offset, -1, SafeOffset(Offset + 1) ? Offset + 1 : -1,
                         -1};
    return DAG.getBitcast(
        VT, DAG.getNode(X86ISD::PSHUFD, DL, MVT::v4i32,
                        DAG.getBitcast(MVT::v4i32, InputV),
                        getV4X86ShuffleImm8ForMask(PSHUFDMask, DL, DAG)));
  }
  if (AnyExt && EltBits == 16 && Scale > 2) {
    int PSHUFDMask[4] = {Offset / 2, -1,
                         SafeOffset(Offset + 1) ? (Offset + 1) / 2 : -1, -1};
    InputV = DAG.getNode(X86ISD::PSHUFD, DL, MVT::v4i32,
                         DAG.getBitcast(MVT::v4i32, InputV),
                         getV4X86ShuffleImm8ForMask(PSHUFDMask, DL, DAG));
    int PSHUFWMask[4] = {1, -1, -1, -1};
    unsigned OddEvenOp = (Offset & 1 ? X86ISD::PSHUFLW : X86ISD::PSHUFHW);
    return DAG.getBitcast(
        VT, DAG.getNode(OddEvenOp, DL, MVT::v8i16,
                        DAG.getBitcast(MVT::v8i16, InputV),
                        getV4X86ShuffleImm8ForMask(PSHUFWMask, DL, DAG)));
  }

  // The SSE4A EXTRQ instruction can efficiently extend the first 2 lanes
  // to 64-bits.
  if ((Scale * EltBits) == 64 && EltBits < 32 && Subtarget.hasSSE4A()) {
    assert(NumElements == (int)Mask.size() && "Unexpected shuffle mask size!");
    assert(VT.is128BitVector() && "Unexpected vector width!");

    int LoIdx = Offset * EltBits;
    SDValue Lo = DAG.getBitcast(
        MVT::v2i64, DAG.getNode(X86ISD::EXTRQI, DL, VT, InputV,
                                DAG.getConstant(EltBits, DL, MVT::i8),
                                DAG.getConstant(LoIdx, DL, MVT::i8)));

    if (isUndefInRange(Mask, NumElements / 2, NumElements / 2) ||
        !SafeOffset(Offset + 1))
      return DAG.getBitcast(VT, Lo);

    int HiIdx = (Offset + 1) * EltBits;
    SDValue Hi = DAG.getBitcast(
        MVT::v2i64, DAG.getNode(X86ISD::EXTRQI, DL, VT, InputV,
                                DAG.getConstant(EltBits, DL, MVT::i8),
                                DAG.getConstant(HiIdx, DL, MVT::i8)));
    return DAG.getBitcast(VT,
                          DAG.getNode(X86ISD::UNPCKL, DL, MVT::v2i64, Lo, Hi));
  }

  // If this would require more than 2 unpack instructions to expand, use
  // pshufb when available. We can only use more than 2 unpack instructions
  // when zero extending i8 elements which also makes it easier to use pshufb.
  if (Scale > 4 && EltBits == 8 && Subtarget.hasSSSE3()) {
    assert(NumElements == 16 && "Unexpected byte vector width!");
    SDValue PSHUFBMask[16];
    for (int i = 0; i < 16; ++i) {
      int Idx = Offset + (i / Scale);
      PSHUFBMask[i] = DAG.getConstant(
          (i % Scale == 0 && SafeOffset(Idx)) ? Idx : 0x80, DL, MVT::i8);
    }
    InputV = DAG.getBitcast(MVT::v16i8, InputV);
    return DAG.getBitcast(
        VT, DAG.getNode(X86ISD::PSHUFB, DL, MVT::v16i8, InputV,
                        DAG.getBuildVector(MVT::v16i8, DL, PSHUFBMask)));
  }

  // If we are extending from an offset, ensure we start on a boundary that
  // we can unpack from.
  int AlignToUnpack = Offset % (NumElements / Scale);
  if (AlignToUnpack) {
    SmallVector<int, 8> ShMask((unsigned)NumElements, -1);
    for (int i = AlignToUnpack; i < NumElements; ++i)
      ShMask[i - AlignToUnpack] = i;
    InputV = DAG.getVectorShuffle(VT, DL, InputV, DAG.getUNDEF(VT), ShMask);
    Offset -= AlignToUnpack;
  }

  // Otherwise emit a sequence of unpacks.
  do {
    unsigned UnpackLoHi = X86ISD::UNPCKL;
    if (Offset >= (NumElements / 2)) {
      UnpackLoHi = X86ISD::UNPCKH;
      Offset -= (NumElements / 2);
    }

    MVT InputVT = MVT::getVectorVT(MVT::getIntegerVT(EltBits), NumElements);
    SDValue Ext = AnyExt ? DAG.getUNDEF(InputVT)
                         : getZeroVector(InputVT, Subtarget, DAG, DL);
    InputV = DAG.getBitcast(InputVT, InputV);
    InputV = DAG.getNode(UnpackLoHi, DL, InputVT, InputV, Ext);
    Scale /= 2;
    EltBits *= 2;
    NumElements /= 2;
  } while (Scale > 1);
  return DAG.getBitcast(VT, InputV);
}

/// \brief Try to lower a vector shuffle as a zero extension on any microarch.
///
/// This routine will try to do everything in its power to cleverly lower
/// a shuffle which happens to match the pattern of a zero extend. It doesn't
/// check for the profitability of this lowering,  it tries to aggressively
/// match this pattern. It will use all of the micro-architectural details it
/// can to emit an efficient lowering. It handles both blends with all-zero
/// inputs to explicitly zero-extend and undef-lanes (sometimes undef due to
/// masking out later).
///
/// The reason we have dedicated lowering for zext-style shuffles is that they
/// are both incredibly common and often quite performance sensitive.
static SDValue lowerVectorShuffleAsZeroOrAnyExtend(
    const SDLoc &DL, MVT VT, SDValue V1, SDValue V2, ArrayRef<int> Mask,
    const APInt &Zeroable, const X86Subtarget &Subtarget,
    SelectionDAG &DAG) {
  int Bits = VT.getSizeInBits();
  int NumLanes = Bits / 128;
  int NumElements = VT.getVectorNumElements();
  int NumEltsPerLane = NumElements / NumLanes;
  assert(VT.getScalarSizeInBits() <= 32 &&
         "Exceeds 32-bit integer zero extension limit");
  assert((int)Mask.size() == NumElements && "Unexpected shuffle mask size");

  // Define a helper function to check a particular ext-scale and lower to it if
  // valid.
  auto Lower = [&](int Scale) -> SDValue {
    SDValue InputV;
    bool AnyExt = true;
    int Offset = 0;
    int Matches = 0;
    for (int i = 0; i < NumElements; ++i) {
      int M = Mask[i];
      if (M < 0)
        continue; // Valid anywhere but doesn't tell us anything.
      if (i % Scale != 0) {
        // Each of the extended elements need to be zeroable.
        if (!Zeroable[i])
          return SDValue();

        // We no longer are in the anyext case.
        AnyExt = false;
        continue;
      }

      // Each of the base elements needs to be consecutive indices into the
      // same input vector.
      SDValue V = M < NumElements ? V1 : V2;
      M = M % NumElements;
      if (!InputV) {
        InputV = V;
        Offset = M - (i / Scale);
      } else if (InputV != V)
        return SDValue(); // Flip-flopping inputs.

      // Offset must start in the lowest 128-bit lane or at the start of an
      // upper lane.
      // FIXME: Is it ever worth allowing a negative base offset?
      if (!((0 <= Offset && Offset < NumEltsPerLane) ||
            (Offset % NumEltsPerLane) == 0))
        return SDValue();

      // If we are offsetting, all referenced entries must come from the same
      // lane.
      if (Offset && (Offset / NumEltsPerLane) != (M / NumEltsPerLane))
        return SDValue();

      if ((M % NumElements) != (Offset + (i / Scale)))
        return SDValue(); // Non-consecutive strided elements.
      Matches++;
    }

    // If we fail to find an input, we have a zero-shuffle which should always
    // have already been handled.
    // FIXME: Maybe handle this here in case during blending we end up with one?
    if (!InputV)
      return SDValue();

    // If we are offsetting, don't extend if we only match a single input, we
    // can always do better by using a basic PSHUF or PUNPCK.
    if (Offset != 0 && Matches < 2)
      return SDValue();

    return lowerVectorShuffleAsSpecificZeroOrAnyExtend(
        DL, VT, Scale, Offset, AnyExt, InputV, Mask, Subtarget, DAG);
  };

  // The widest scale possible for extending is to a 64-bit integer.
  assert(Bits % 64 == 0 &&
         "The number of bits in a vector must be divisible by 64 on x86!");
  int NumExtElements = Bits / 64;

  // Each iteration, try extending the elements half as much, but into twice as
  // many elements.
  for (; NumExtElements < NumElements; NumExtElements *= 2) {
    assert(NumElements % NumExtElements == 0 &&
           "The input vector size must be divisible by the extended size.");
    if (SDValue V = Lower(NumElements / NumExtElements))
      return V;
  }

  // General extends failed, but 128-bit vectors may be able to use MOVQ.
  if (Bits != 128)
    return SDValue();

  // Returns one of the source operands if the shuffle can be reduced to a
  // MOVQ, copying the lower 64-bits and zero-extending to the upper 64-bits.
  auto CanZExtLowHalf = [&]() {
    for (int i = NumElements / 2; i != NumElements; ++i)
      if (!Zeroable[i])
        return SDValue();
    if (isSequentialOrUndefInRange(Mask, 0, NumElements / 2, 0))
      return V1;
    if (isSequentialOrUndefInRange(Mask, 0, NumElements / 2, NumElements))
      return V2;
    return SDValue();
  };

  if (SDValue V = CanZExtLowHalf()) {
    V = DAG.getBitcast(MVT::v2i64, V);
    V = DAG.getNode(X86ISD::VZEXT_MOVL, DL, MVT::v2i64, V);
    return DAG.getBitcast(VT, V);
  }

  // No viable ext lowering found.
  return SDValue();
}

/// \brief Try to get a scalar value for a specific element of a vector.
///
/// Looks through BUILD_VECTOR and SCALAR_TO_VECTOR nodes to find a scalar.
static SDValue getScalarValueForVectorElement(SDValue V, int Idx,
                                              SelectionDAG &DAG) {
  MVT VT = V.getSimpleValueType();
  MVT EltVT = VT.getVectorElementType();
  V = peekThroughBitcasts(V);

  // If the bitcasts shift the element size, we can't extract an equivalent
  // element from it.
  MVT NewVT = V.getSimpleValueType();
  if (!NewVT.isVector() || NewVT.getScalarSizeInBits() != VT.getScalarSizeInBits())
    return SDValue();

  if (V.getOpcode() == ISD::BUILD_VECTOR ||
      (Idx == 0 && V.getOpcode() == ISD::SCALAR_TO_VECTOR)) {
    // Ensure the scalar operand is the same size as the destination.
    // FIXME: Add support for scalar truncation where possible.
    SDValue S = V.getOperand(Idx);
    if (EltVT.getSizeInBits() == S.getSimpleValueType().getSizeInBits())
      return DAG.getBitcast(EltVT, S);
  }

  return SDValue();
}

/// \brief Helper to test for a load that can be folded with x86 shuffles.
///
/// This is particularly important because the set of instructions varies
/// significantly based on whether the operand is a load or not.
static bool isShuffleFoldableLoad(SDValue V) {
  V = peekThroughBitcasts(V);
  return ISD::isNON_EXTLoad(V.getNode());
}

/// \brief Try to lower insertion of a single element into a zero vector.
///
/// This is a common pattern that we have especially efficient patterns to lower
/// across all subtarget feature sets.
static SDValue lowerVectorShuffleAsElementInsertion(
    const SDLoc &DL, MVT VT, SDValue V1, SDValue V2, ArrayRef<int> Mask,
    const APInt &Zeroable, const X86Subtarget &Subtarget,
    SelectionDAG &DAG) {
  MVT ExtVT = VT;
  MVT EltVT = VT.getVectorElementType();

  int V2Index =
      find_if(Mask, [&Mask](int M) { return M >= (int)Mask.size(); }) -
      Mask.begin();
  bool IsV1Zeroable = true;
  for (int i = 0, Size = Mask.size(); i < Size; ++i)
    if (i != V2Index && !Zeroable[i]) {
      IsV1Zeroable = false;
      break;
    }

  // Check for a single input from a SCALAR_TO_VECTOR node.
  // FIXME: All of this should be canonicalized into INSERT_VECTOR_ELT and
  // all the smarts here sunk into that routine. However, the current
  // lowering of BUILD_VECTOR makes that nearly impossible until the old
  // vector shuffle lowering is dead.
  SDValue V2S = getScalarValueForVectorElement(V2, Mask[V2Index] - Mask.size(),
                                               DAG);
  if (V2S && DAG.getTargetLoweringInfo().isTypeLegal(V2S.getValueType())) {
    // We need to zext the scalar if it is smaller than an i32.
    V2S = DAG.getBitcast(EltVT, V2S);
    if (EltVT == MVT::i8 || EltVT == MVT::i16) {
      // Using zext to expand a narrow element won't work for non-zero
      // insertions.
      if (!IsV1Zeroable)
        return SDValue();

      // Zero-extend directly to i32.
      ExtVT = MVT::v4i32;
      V2S = DAG.getNode(ISD::ZERO_EXTEND, DL, MVT::i32, V2S);
    }
    V2 = DAG.getNode(ISD::SCALAR_TO_VECTOR, DL, ExtVT, V2S);
  } else if (Mask[V2Index] != (int)Mask.size() || EltVT == MVT::i8 ||
             EltVT == MVT::i16) {
    // Either not inserting from the low element of the input or the input
    // element size is too small to use VZEXT_MOVL to clear the high bits.
    return SDValue();
  }

  if (!IsV1Zeroable) {
    // If V1 can't be treated as a zero vector we have fewer options to lower
    // this. We can't support integer vectors or non-zero targets cheaply, and
    // the V1 elements can't be permuted in any way.
    assert(VT == ExtVT && "Cannot change extended type when non-zeroable!");
    if (!VT.isFloatingPoint() || V2Index != 0)
      return SDValue();
    SmallVector<int, 8> V1Mask(Mask.begin(), Mask.end());
    V1Mask[V2Index] = -1;
    if (!isNoopShuffleMask(V1Mask))
      return SDValue();
    if (!VT.is128BitVector())
      return SDValue();

    // Otherwise, use MOVSD or MOVSS.
    assert((EltVT == MVT::f32 || EltVT == MVT::f64) &&
           "Only two types of floating point element types to handle!");
    return DAG.getNode(EltVT == MVT::f32 ? X86ISD::MOVSS : X86ISD::MOVSD, DL,
                       ExtVT, V1, V2);
  }

  // This lowering only works for the low element with floating point vectors.
  if (VT.isFloatingPoint() && V2Index != 0)
    return SDValue();

  V2 = DAG.getNode(X86ISD::VZEXT_MOVL, DL, ExtVT, V2);
  if (ExtVT != VT)
    V2 = DAG.getBitcast(VT, V2);

  if (V2Index != 0) {
    // If we have 4 or fewer lanes we can cheaply shuffle the element into
    // the desired position. Otherwise it is more efficient to do a vector
    // shift left. We know that we can do a vector shift left because all
    // the inputs are zero.
    if (VT.isFloatingPoint() || VT.getVectorNumElements() <= 4) {
      SmallVector<int, 4> V2Shuffle(Mask.size(), 1);
      V2Shuffle[V2Index] = 0;
      V2 = DAG.getVectorShuffle(VT, DL, V2, DAG.getUNDEF(VT), V2Shuffle);
    } else {
      V2 = DAG.getBitcast(MVT::v16i8, V2);
      V2 = DAG.getNode(
          X86ISD::VSHLDQ, DL, MVT::v16i8, V2,
          DAG.getConstant(V2Index * EltVT.getSizeInBits() / 8, DL,
                          DAG.getTargetLoweringInfo().getScalarShiftAmountTy(
                              DAG.getDataLayout(), VT)));
      V2 = DAG.getBitcast(VT, V2);
    }
  }
  return V2;
}

/// Try to lower broadcast of a single - truncated - integer element,
/// coming from a scalar_to_vector/build_vector node \p V0 with larger elements.
///
/// This assumes we have AVX2.
static SDValue lowerVectorShuffleAsTruncBroadcast(const SDLoc &DL, MVT VT,
                                                  SDValue V0, int BroadcastIdx,
                                                  const X86Subtarget &Subtarget,
                                                  SelectionDAG &DAG) {
  assert(Subtarget.hasAVX2() &&
         "We can only lower integer broadcasts with AVX2!");

  EVT EltVT = VT.getVectorElementType();
  EVT V0VT = V0.getValueType();

  assert(VT.isInteger() && "Unexpected non-integer trunc broadcast!");
  assert(V0VT.isVector() && "Unexpected non-vector vector-sized value!");

  EVT V0EltVT = V0VT.getVectorElementType();
  if (!V0EltVT.isInteger())
    return SDValue();

  const unsigned EltSize = EltVT.getSizeInBits();
  const unsigned V0EltSize = V0EltVT.getSizeInBits();

  // This is only a truncation if the original element type is larger.
  if (V0EltSize <= EltSize)
    return SDValue();

  assert(((V0EltSize % EltSize) == 0) &&
         "Scalar type sizes must all be powers of 2 on x86!");

  const unsigned V0Opc = V0.getOpcode();
  const unsigned Scale = V0EltSize / EltSize;
  const unsigned V0BroadcastIdx = BroadcastIdx / Scale;

  if ((V0Opc != ISD::SCALAR_TO_VECTOR || V0BroadcastIdx != 0) &&
      V0Opc != ISD::BUILD_VECTOR)
    return SDValue();

  SDValue Scalar = V0.getOperand(V0BroadcastIdx);

  // If we're extracting non-least-significant bits, shift so we can truncate.
  // Hopefully, we can fold away the trunc/srl/load into the broadcast.
  // Even if we can't (and !isShuffleFoldableLoad(Scalar)), prefer
  // vpbroadcast+vmovd+shr to vpshufb(m)+vmovd.
  if (const int OffsetIdx = BroadcastIdx % Scale)
    Scalar = DAG.getNode(ISD::SRL, DL, Scalar.getValueType(), Scalar,
            DAG.getConstant(OffsetIdx * EltSize, DL, Scalar.getValueType()));

  return DAG.getNode(X86ISD::VBROADCAST, DL, VT,
                     DAG.getNode(ISD::TRUNCATE, DL, EltVT, Scalar));
}

/// \brief Try to lower broadcast of a single element.
///
/// For convenience, this code also bundles all of the subtarget feature set
/// filtering. While a little annoying to re-dispatch on type here, there isn't
/// a convenient way to factor it out.
static SDValue lowerVectorShuffleAsBroadcast(const SDLoc &DL, MVT VT,
                                             SDValue V1, SDValue V2,
                                             ArrayRef<int> Mask,
                                             const X86Subtarget &Subtarget,
                                             SelectionDAG &DAG) {
  if (!((Subtarget.hasSSE3() && VT == MVT::v2f64) ||
        (Subtarget.hasAVX() && VT.isFloatingPoint()) ||
        (Subtarget.hasAVX2() && VT.isInteger())))
    return SDValue();

  // With MOVDDUP (v2f64) we can broadcast from a register or a load, otherwise
  // we can only broadcast from a register with AVX2.
  unsigned NumElts = Mask.size();
  unsigned Opcode = (VT == MVT::v2f64 && !Subtarget.hasAVX2())
                        ? X86ISD::MOVDDUP
                        : X86ISD::VBROADCAST;
  bool BroadcastFromReg = (Opcode == X86ISD::MOVDDUP) || Subtarget.hasAVX2();

  // Check that the mask is a broadcast.
  int BroadcastIdx = -1;
  for (int i = 0; i != (int)NumElts; ++i) {
    SmallVector<int, 8> BroadcastMask(NumElts, i);
    if (isShuffleEquivalent(V1, V2, Mask, BroadcastMask)) {
      BroadcastIdx = i;
      break;
    }
  }

  if (BroadcastIdx < 0)
    return SDValue();
  assert(BroadcastIdx < (int)Mask.size() && "We only expect to be called with "
                                            "a sorted mask where the broadcast "
                                            "comes from V1.");

  // Go up the chain of (vector) values to find a scalar load that we can
  // combine with the broadcast.
  SDValue V = V1;
  for (;;) {
    switch (V.getOpcode()) {
    case ISD::BITCAST: {
      SDValue VSrc = V.getOperand(0);
      MVT SrcVT = VSrc.getSimpleValueType();
      if (VT.getScalarSizeInBits() != SrcVT.getScalarSizeInBits())
        break;
      V = VSrc;
      continue;
    }
    case ISD::CONCAT_VECTORS: {
      int OperandSize = Mask.size() / V.getNumOperands();
      V = V.getOperand(BroadcastIdx / OperandSize);
      BroadcastIdx %= OperandSize;
      continue;
    }
    case ISD::INSERT_SUBVECTOR: {
      SDValue VOuter = V.getOperand(0), VInner = V.getOperand(1);
      auto ConstantIdx = dyn_cast<ConstantSDNode>(V.getOperand(2));
      if (!ConstantIdx)
        break;

      int BeginIdx = (int)ConstantIdx->getZExtValue();
      int EndIdx =
          BeginIdx + (int)VInner.getSimpleValueType().getVectorNumElements();
      if (BroadcastIdx >= BeginIdx && BroadcastIdx < EndIdx) {
        BroadcastIdx -= BeginIdx;
        V = VInner;
      } else {
        V = VOuter;
      }
      continue;
    }
    }
    break;
  }

  // Check if this is a broadcast of a scalar. We special case lowering
  // for scalars so that we can more effectively fold with loads.
  // First, look through bitcast: if the original value has a larger element
  // type than the shuffle, the broadcast element is in essence truncated.
  // Make that explicit to ease folding.
  if (V.getOpcode() == ISD::BITCAST && VT.isInteger())
    if (SDValue TruncBroadcast = lowerVectorShuffleAsTruncBroadcast(
            DL, VT, V.getOperand(0), BroadcastIdx, Subtarget, DAG))
      return TruncBroadcast;

  MVT BroadcastVT = VT;

  // Peek through any bitcast (only useful for loads).
  SDValue BC = peekThroughBitcasts(V);

  // Also check the simpler case, where we can directly reuse the scalar.
  if (V.getOpcode() == ISD::BUILD_VECTOR ||
      (V.getOpcode() == ISD::SCALAR_TO_VECTOR && BroadcastIdx == 0)) {
    V = V.getOperand(BroadcastIdx);

    // If we can't broadcast from a register, check that the input is a load.
    if (!BroadcastFromReg && !isShuffleFoldableLoad(V))
      return SDValue();
  } else if (MayFoldLoad(BC) && !cast<LoadSDNode>(BC)->isVolatile()) {
    // 32-bit targets need to load i64 as a f64 and then bitcast the result.
    if (!Subtarget.is64Bit() && VT.getScalarType() == MVT::i64) {
      BroadcastVT = MVT::getVectorVT(MVT::f64, VT.getVectorNumElements());
      Opcode = (BroadcastVT.is128BitVector() && !Subtarget.hasAVX2())
                   ? X86ISD::MOVDDUP
                   : Opcode;
    }

    // If we are broadcasting a load that is only used by the shuffle
    // then we can reduce the vector load to the broadcasted scalar load.
    LoadSDNode *Ld = cast<LoadSDNode>(BC);
    SDValue BaseAddr = Ld->getOperand(1);
    EVT SVT = BroadcastVT.getScalarType();
    unsigned Offset = BroadcastIdx * SVT.getStoreSize();
    SDValue NewAddr = DAG.getMemBasePlusOffset(BaseAddr, Offset, DL);
    V = DAG.getLoad(SVT, DL, Ld->getChain(), NewAddr,
                    DAG.getMachineFunction().getMachineMemOperand(
                        Ld->getMemOperand(), Offset, SVT.getStoreSize()));
    DAG.makeEquivalentMemoryOrdering(Ld, V);
  } else if (!BroadcastFromReg) {
    // We can't broadcast from a vector register.
    return SDValue();
  } else if (BroadcastIdx != 0) {
    // We can only broadcast from the zero-element of a vector register,
    // but it can be advantageous to broadcast from the zero-element of a
    // subvector.
    if (!VT.is256BitVector() && !VT.is512BitVector())
      return SDValue();

    // VPERMQ/VPERMPD can perform the cross-lane shuffle directly.
    if (VT == MVT::v4f64 || VT == MVT::v4i64)
      return SDValue();

    // Only broadcast the zero-element of a 128-bit subvector.
    unsigned EltSize = VT.getScalarSizeInBits();
    if (((BroadcastIdx * EltSize) % 128) != 0)
      return SDValue();

    // The shuffle input might have been a bitcast we looked through; look at
    // the original input vector.  Emit an EXTRACT_SUBVECTOR of that type; we'll
    // later bitcast it to BroadcastVT.
    MVT SrcVT = V.getSimpleValueType();
    assert(SrcVT.getScalarSizeInBits() == BroadcastVT.getScalarSizeInBits() &&
           "Unexpected vector element size");
    assert((SrcVT.is256BitVector() || SrcVT.is512BitVector()) &&
           "Unexpected vector size");

    MVT ExtVT = MVT::getVectorVT(SrcVT.getScalarType(), 128 / EltSize);
    V = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, ExtVT, V,
                    DAG.getIntPtrConstant(BroadcastIdx, DL));
  }

  if (Opcode == X86ISD::MOVDDUP && !V.getValueType().isVector())
    V = DAG.getNode(ISD::SCALAR_TO_VECTOR, DL, MVT::v2f64,
                    DAG.getBitcast(MVT::f64, V));

  // Bitcast back to the same scalar type as BroadcastVT.
  MVT SrcVT = V.getSimpleValueType();
  if (SrcVT.getScalarType() != BroadcastVT.getScalarType()) {
    assert(SrcVT.getScalarSizeInBits() == BroadcastVT.getScalarSizeInBits() &&
           "Unexpected vector element size");
    if (SrcVT.isVector()) {
      unsigned NumSrcElts = SrcVT.getVectorNumElements();
      SrcVT = MVT::getVectorVT(BroadcastVT.getScalarType(), NumSrcElts);
    } else {
      SrcVT = BroadcastVT.getScalarType();
    }
    V = DAG.getBitcast(SrcVT, V);
  }

  // 32-bit targets need to load i64 as a f64 and then bitcast the result.
  if (!Subtarget.is64Bit() && SrcVT == MVT::i64) {
    V = DAG.getBitcast(MVT::f64, V);
    unsigned NumBroadcastElts = BroadcastVT.getVectorNumElements();
    BroadcastVT = MVT::getVectorVT(MVT::f64, NumBroadcastElts);
  }

  // We only support broadcasting from 128-bit vectors to minimize the
  // number of patterns we need to deal with in isel. So extract down to
  // 128-bits.
  if (SrcVT.getSizeInBits() > 128)
    V = extract128BitVector(V, 0, DAG, DL);

  return DAG.getBitcast(VT, DAG.getNode(Opcode, DL, BroadcastVT, V));
}

// Check for whether we can use INSERTPS to perform the shuffle. We only use
// INSERTPS when the V1 elements are already in the correct locations
// because otherwise we can just always use two SHUFPS instructions which
// are much smaller to encode than a SHUFPS and an INSERTPS. We can also
// perform INSERTPS if a single V1 element is out of place and all V2
// elements are zeroable.
static bool matchVectorShuffleAsInsertPS(SDValue &V1, SDValue &V2,
                                         unsigned &InsertPSMask,
                                         const APInt &Zeroable,
                                         ArrayRef<int> Mask,
                                         SelectionDAG &DAG) {
  assert(V1.getSimpleValueType().is128BitVector() && "Bad operand type!");
  assert(V2.getSimpleValueType().is128BitVector() && "Bad operand type!");
  assert(Mask.size() == 4 && "Unexpected mask size for v4 shuffle!");

  // Attempt to match INSERTPS with one element from VA or VB being
  // inserted into VA (or undef). If successful, V1, V2 and InsertPSMask
  // are updated.
  auto matchAsInsertPS = [&](SDValue VA, SDValue VB,
                             ArrayRef<int> CandidateMask) {
    unsigned ZMask = 0;
    int VADstIndex = -1;
    int VBDstIndex = -1;
    bool VAUsedInPlace = false;

    for (int i = 0; i < 4; ++i) {
      // Synthesize a zero mask from the zeroable elements (includes undefs).
      if (Zeroable[i]) {
        ZMask |= 1 << i;
        continue;
      }

      // Flag if we use any VA inputs in place.
      if (i == CandidateMask[i]) {
        VAUsedInPlace = true;
        continue;
      }

      // We can only insert a single non-zeroable element.
      if (VADstIndex >= 0 || VBDstIndex >= 0)
        return false;

      if (CandidateMask[i] < 4) {
        // VA input out of place for insertion.
        VADstIndex = i;
      } else {
        // VB input for insertion.
        VBDstIndex = i;
      }
    }

    // Don't bother if we have no (non-zeroable) element for insertion.
    if (VADstIndex < 0 && VBDstIndex < 0)
      return false;

    // Determine element insertion src/dst indices. The src index is from the
    // start of the inserted vector, not the start of the concatenated vector.
    unsigned VBSrcIndex = 0;
    if (VADstIndex >= 0) {
      // If we have a VA input out of place, we use VA as the V2 element
      // insertion and don't use the original V2 at all.
      VBSrcIndex = CandidateMask[VADstIndex];
      VBDstIndex = VADstIndex;
      VB = VA;
    } else {
      VBSrcIndex = CandidateMask[VBDstIndex] - 4;
    }

    // If no V1 inputs are used in place, then the result is created only from
    // the zero mask and the V2 insertion - so remove V1 dependency.
    if (!VAUsedInPlace)
      VA = DAG.getUNDEF(MVT::v4f32);

    // Update V1, V2 and InsertPSMask accordingly.
    V1 = VA;
    V2 = VB;

    // Insert the V2 element into the desired position.
    InsertPSMask = VBSrcIndex << 6 | VBDstIndex << 4 | ZMask;
    assert((InsertPSMask & ~0xFFu) == 0 && "Invalid mask!");
    return true;
  };

  if (matchAsInsertPS(V1, V2, Mask))
    return true;

  // Commute and try again.
  SmallVector<int, 4> CommutedMask(Mask.begin(), Mask.end());
  ShuffleVectorSDNode::commuteMask(CommutedMask);
  if (matchAsInsertPS(V2, V1, CommutedMask))
    return true;

  return false;
}

static SDValue lowerVectorShuffleAsInsertPS(const SDLoc &DL, SDValue V1,
                                            SDValue V2, ArrayRef<int> Mask,
                                            const APInt &Zeroable,
                                            SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v4f32 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v4f32 && "Bad operand type!");

  // Attempt to match the insertps pattern.
  unsigned InsertPSMask;
  if (!matchVectorShuffleAsInsertPS(V1, V2, InsertPSMask, Zeroable, Mask, DAG))
    return SDValue();

  // Insert the V2 element into the desired position.
  return DAG.getNode(X86ISD::INSERTPS, DL, MVT::v4f32, V1, V2,
                     DAG.getConstant(InsertPSMask, DL, MVT::i8));
}

/// \brief Try to lower a shuffle as a permute of the inputs followed by an
/// UNPCK instruction.
///
/// This specifically targets cases where we end up with alternating between
/// the two inputs, and so can permute them into something that feeds a single
/// UNPCK instruction. Note that this routine only targets integer vectors
/// because for floating point vectors we have a generalized SHUFPS lowering
/// strategy that handles everything that doesn't *exactly* match an unpack,
/// making this clever lowering unnecessary.
static SDValue lowerVectorShuffleAsPermuteAndUnpack(const SDLoc &DL, MVT VT,
                                                    SDValue V1, SDValue V2,
                                                    ArrayRef<int> Mask,
                                                    SelectionDAG &DAG) {
  assert(!VT.isFloatingPoint() &&
         "This routine only supports integer vectors.");
  assert(VT.is128BitVector() &&
         "This routine only works on 128-bit vectors.");
  assert(!V2.isUndef() &&
         "This routine should only be used when blending two inputs.");
  assert(Mask.size() >= 2 && "Single element masks are invalid.");

  int Size = Mask.size();

  int NumLoInputs =
      count_if(Mask, [Size](int M) { return M >= 0 && M % Size < Size / 2; });
  int NumHiInputs =
      count_if(Mask, [Size](int M) { return M % Size >= Size / 2; });

  bool UnpackLo = NumLoInputs >= NumHiInputs;

  auto TryUnpack = [&](int ScalarSize, int Scale) {
    SmallVector<int, 16> V1Mask((unsigned)Size, -1);
    SmallVector<int, 16> V2Mask((unsigned)Size, -1);

    for (int i = 0; i < Size; ++i) {
      if (Mask[i] < 0)
        continue;

      // Each element of the unpack contains Scale elements from this mask.
      int UnpackIdx = i / Scale;

      // We only handle the case where V1 feeds the first slots of the unpack.
      // We rely on canonicalization to ensure this is the case.
      if ((UnpackIdx % 2 == 0) != (Mask[i] < Size))
        return SDValue();

      // Setup the mask for this input. The indexing is tricky as we have to
      // handle the unpack stride.
      SmallVectorImpl<int> &VMask = (UnpackIdx % 2 == 0) ? V1Mask : V2Mask;
      VMask[(UnpackIdx / 2) * Scale + i % Scale + (UnpackLo ? 0 : Size / 2)] =
          Mask[i] % Size;
    }

    // If we will have to shuffle both inputs to use the unpack, check whether
    // we can just unpack first and shuffle the result. If so, skip this unpack.
    if ((NumLoInputs == 0 || NumHiInputs == 0) && !isNoopShuffleMask(V1Mask) &&
        !isNoopShuffleMask(V2Mask))
      return SDValue();

    // Shuffle the inputs into place.
    V1 = DAG.getVectorShuffle(VT, DL, V1, DAG.getUNDEF(VT), V1Mask);
    V2 = DAG.getVectorShuffle(VT, DL, V2, DAG.getUNDEF(VT), V2Mask);

    // Cast the inputs to the type we will use to unpack them.
    MVT UnpackVT = MVT::getVectorVT(MVT::getIntegerVT(ScalarSize), Size / Scale);
    V1 = DAG.getBitcast(UnpackVT, V1);
    V2 = DAG.getBitcast(UnpackVT, V2);

    // Unpack the inputs and cast the result back to the desired type.
    return DAG.getBitcast(
        VT, DAG.getNode(UnpackLo ? X86ISD::UNPCKL : X86ISD::UNPCKH, DL,
                        UnpackVT, V1, V2));
  };

  // We try each unpack from the largest to the smallest to try and find one
  // that fits this mask.
  int OrigScalarSize = VT.getScalarSizeInBits();
  for (int ScalarSize = 64; ScalarSize >= OrigScalarSize; ScalarSize /= 2)
    if (SDValue Unpack = TryUnpack(ScalarSize, ScalarSize / OrigScalarSize))
      return Unpack;

  // If none of the unpack-rooted lowerings worked (or were profitable) try an
  // initial unpack.
  if (NumLoInputs == 0 || NumHiInputs == 0) {
    assert((NumLoInputs > 0 || NumHiInputs > 0) &&
           "We have to have *some* inputs!");
    int HalfOffset = NumLoInputs == 0 ? Size / 2 : 0;

    // FIXME: We could consider the total complexity of the permute of each
    // possible unpacking. Or at the least we should consider how many
    // half-crossings are created.
    // FIXME: We could consider commuting the unpacks.

    SmallVector<int, 32> PermMask((unsigned)Size, -1);
    for (int i = 0; i < Size; ++i) {
      if (Mask[i] < 0)
        continue;

      assert(Mask[i] % Size >= HalfOffset && "Found input from wrong half!");

      PermMask[i] =
          2 * ((Mask[i] % Size) - HalfOffset) + (Mask[i] < Size ? 0 : 1);
    }
    return DAG.getVectorShuffle(
        VT, DL, DAG.getNode(NumLoInputs == 0 ? X86ISD::UNPCKH : X86ISD::UNPCKL,
                            DL, VT, V1, V2),
        DAG.getUNDEF(VT), PermMask);
  }

  return SDValue();
}

/// \brief Handle lowering of 2-lane 64-bit floating point shuffles.
///
/// This is the basis function for the 2-lane 64-bit shuffles as we have full
/// support for floating point shuffles but not integer shuffles. These
/// instructions will incur a domain crossing penalty on some chips though so
/// it is better to avoid lowering through this for integer vectors where
/// possible.
static SDValue lowerV2F64VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                       const APInt &Zeroable,
                                       SDValue V1, SDValue V2,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v2f64 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v2f64 && "Bad operand type!");
  assert(Mask.size() == 2 && "Unexpected mask size for v2 shuffle!");

  if (V2.isUndef()) {
    // Check for being able to broadcast a single element.
    if (SDValue Broadcast = lowerVectorShuffleAsBroadcast(
            DL, MVT::v2f64, V1, V2, Mask, Subtarget, DAG))
      return Broadcast;

    // Straight shuffle of a single input vector. Simulate this by using the
    // single input as both of the "inputs" to this instruction..
    unsigned SHUFPDMask = (Mask[0] == 1) | ((Mask[1] == 1) << 1);

    if (Subtarget.hasAVX()) {
      // If we have AVX, we can use VPERMILPS which will allow folding a load
      // into the shuffle.
      return DAG.getNode(X86ISD::VPERMILPI, DL, MVT::v2f64, V1,
                         DAG.getConstant(SHUFPDMask, DL, MVT::i8));
    }

    return DAG.getNode(
        X86ISD::SHUFP, DL, MVT::v2f64,
        Mask[0] == SM_SentinelUndef ? DAG.getUNDEF(MVT::v2f64) : V1,
        Mask[1] == SM_SentinelUndef ? DAG.getUNDEF(MVT::v2f64) : V1,
        DAG.getConstant(SHUFPDMask, DL, MVT::i8));
  }
  assert(Mask[0] >= 0 && Mask[0] < 2 && "Non-canonicalized blend!");
  assert(Mask[1] >= 2 && "Non-canonicalized blend!");

  // If we have a single input, insert that into V1 if we can do so cheaply.
  if ((Mask[0] >= 2) + (Mask[1] >= 2) == 1) {
    if (SDValue Insertion = lowerVectorShuffleAsElementInsertion(
            DL, MVT::v2f64, V1, V2, Mask, Zeroable, Subtarget, DAG))
      return Insertion;
    // Try inverting the insertion since for v2 masks it is easy to do and we
    // can't reliably sort the mask one way or the other.
    int InverseMask[2] = {Mask[0] < 0 ? -1 : (Mask[0] ^ 2),
                          Mask[1] < 0 ? -1 : (Mask[1] ^ 2)};
    if (SDValue Insertion = lowerVectorShuffleAsElementInsertion(
            DL, MVT::v2f64, V2, V1, InverseMask, Zeroable, Subtarget, DAG))
      return Insertion;
  }

  // Try to use one of the special instruction patterns to handle two common
  // blend patterns if a zero-blend above didn't work.
  if (isShuffleEquivalent(V1, V2, Mask, {0, 3}) ||
      isShuffleEquivalent(V1, V2, Mask, {1, 3}))
    if (SDValue V1S = getScalarValueForVectorElement(V1, Mask[0], DAG))
      // We can either use a special instruction to load over the low double or
      // to move just the low double.
      return DAG.getNode(
          isShuffleFoldableLoad(V1S) ? X86ISD::MOVLPD : X86ISD::MOVSD,
          DL, MVT::v2f64, V2,
          DAG.getNode(ISD::SCALAR_TO_VECTOR, DL, MVT::v2f64, V1S));

  if (Subtarget.hasSSE41())
    if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v2f64, V1, V2, Mask,
                                                  Zeroable, Subtarget, DAG))
      return Blend;

  // Use dedicated unpack instructions for masks that match their pattern.
  if (SDValue V =
          lowerVectorShuffleWithUNPCK(DL, MVT::v2f64, Mask, V1, V2, DAG))
    return V;

  unsigned SHUFPDMask = (Mask[0] == 1) | (((Mask[1] - 2) == 1) << 1);
  return DAG.getNode(X86ISD::SHUFP, DL, MVT::v2f64, V1, V2,
                     DAG.getConstant(SHUFPDMask, DL, MVT::i8));
}

/// \brief Handle lowering of 2-lane 64-bit integer shuffles.
///
/// Tries to lower a 2-lane 64-bit shuffle using shuffle operations provided by
/// the integer unit to minimize domain crossing penalties. However, for blends
/// it falls back to the floating point shuffle operation with appropriate bit
/// casting.
static SDValue lowerV2I64VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                       const APInt &Zeroable,
                                       SDValue V1, SDValue V2,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v2i64 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v2i64 && "Bad operand type!");
  assert(Mask.size() == 2 && "Unexpected mask size for v2 shuffle!");

  if (V2.isUndef()) {
    // Check for being able to broadcast a single element.
    if (SDValue Broadcast = lowerVectorShuffleAsBroadcast(
            DL, MVT::v2i64, V1, V2, Mask, Subtarget, DAG))
      return Broadcast;

    // Straight shuffle of a single input vector. For everything from SSE2
    // onward this has a single fast instruction with no scary immediates.
    // We have to map the mask as it is actually a v4i32 shuffle instruction.
    V1 = DAG.getBitcast(MVT::v4i32, V1);
    int WidenedMask[4] = {
        std::max(Mask[0], 0) * 2, std::max(Mask[0], 0) * 2 + 1,
        std::max(Mask[1], 0) * 2, std::max(Mask[1], 0) * 2 + 1};
    return DAG.getBitcast(
        MVT::v2i64,
        DAG.getNode(X86ISD::PSHUFD, DL, MVT::v4i32, V1,
                    getV4X86ShuffleImm8ForMask(WidenedMask, DL, DAG)));
  }
  assert(Mask[0] != -1 && "No undef lanes in multi-input v2 shuffles!");
  assert(Mask[1] != -1 && "No undef lanes in multi-input v2 shuffles!");
  assert(Mask[0] < 2 && "We sort V1 to be the first input.");
  assert(Mask[1] >= 2 && "We sort V2 to be the second input.");

  // Try to use shift instructions.
  if (SDValue Shift = lowerVectorShuffleAsShift(DL, MVT::v2i64, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Shift;

  // When loading a scalar and then shuffling it into a vector we can often do
  // the insertion cheaply.
  if (SDValue Insertion = lowerVectorShuffleAsElementInsertion(
          DL, MVT::v2i64, V1, V2, Mask, Zeroable, Subtarget, DAG))
    return Insertion;
  // Try inverting the insertion since for v2 masks it is easy to do and we
  // can't reliably sort the mask one way or the other.
  int InverseMask[2] = {Mask[0] ^ 2, Mask[1] ^ 2};
  if (SDValue Insertion = lowerVectorShuffleAsElementInsertion(
          DL, MVT::v2i64, V2, V1, InverseMask, Zeroable, Subtarget, DAG))
    return Insertion;

  // We have different paths for blend lowering, but they all must use the
  // *exact* same predicate.
  bool IsBlendSupported = Subtarget.hasSSE41();
  if (IsBlendSupported)
    if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v2i64, V1, V2, Mask,
                                                  Zeroable, Subtarget, DAG))
      return Blend;

  // Use dedicated unpack instructions for masks that match their pattern.
  if (SDValue V =
          lowerVectorShuffleWithUNPCK(DL, MVT::v2i64, Mask, V1, V2, DAG))
    return V;

  // Try to use byte rotation instructions.
  // Its more profitable for pre-SSSE3 to use shuffles/unpacks.
  if (Subtarget.hasSSSE3()) {
    if (Subtarget.hasVLX())
      if (SDValue Rotate = lowerVectorShuffleAsRotate(DL, MVT::v2i64, V1, V2,
                                                      Mask, Subtarget, DAG))
        return Rotate;

    if (SDValue Rotate = lowerVectorShuffleAsByteRotate(
            DL, MVT::v2i64, V1, V2, Mask, Subtarget, DAG))
      return Rotate;
  }

  // If we have direct support for blends, we should lower by decomposing into
  // a permute. That will be faster than the domain cross.
  if (IsBlendSupported)
    return lowerVectorShuffleAsDecomposedShuffleBlend(DL, MVT::v2i64, V1, V2,
                                                      Mask, DAG);

  // We implement this with SHUFPD which is pretty lame because it will likely
  // incur 2 cycles of stall for integer vectors on Nehalem and older chips.
  // However, all the alternatives are still more cycles and newer chips don't
  // have this problem. It would be really nice if x86 had better shuffles here.
  V1 = DAG.getBitcast(MVT::v2f64, V1);
  V2 = DAG.getBitcast(MVT::v2f64, V2);
  return DAG.getBitcast(MVT::v2i64,
                        DAG.getVectorShuffle(MVT::v2f64, DL, V1, V2, Mask));
}

/// \brief Test whether this can be lowered with a single SHUFPS instruction.
///
/// This is used to disable more specialized lowerings when the shufps lowering
/// will happen to be efficient.
static bool isSingleSHUFPSMask(ArrayRef<int> Mask) {
  // This routine only handles 128-bit shufps.
  assert(Mask.size() == 4 && "Unsupported mask size!");
  assert(Mask[0] >= -1 && Mask[0] < 8 && "Out of bound mask element!");
  assert(Mask[1] >= -1 && Mask[1] < 8 && "Out of bound mask element!");
  assert(Mask[2] >= -1 && Mask[2] < 8 && "Out of bound mask element!");
  assert(Mask[3] >= -1 && Mask[3] < 8 && "Out of bound mask element!");

  // To lower with a single SHUFPS we need to have the low half and high half
  // each requiring a single input.
  if (Mask[0] >= 0 && Mask[1] >= 0 && (Mask[0] < 4) != (Mask[1] < 4))
    return false;
  if (Mask[2] >= 0 && Mask[3] >= 0 && (Mask[2] < 4) != (Mask[3] < 4))
    return false;

  return true;
}

/// \brief Lower a vector shuffle using the SHUFPS instruction.
///
/// This is a helper routine dedicated to lowering vector shuffles using SHUFPS.
/// It makes no assumptions about whether this is the *best* lowering, it simply
/// uses it.
static SDValue lowerVectorShuffleWithSHUFPS(const SDLoc &DL, MVT VT,
                                            ArrayRef<int> Mask, SDValue V1,
                                            SDValue V2, SelectionDAG &DAG) {
  SDValue LowV = V1, HighV = V2;
  int NewMask[4] = {Mask[0], Mask[1], Mask[2], Mask[3]};

  int NumV2Elements = count_if(Mask, [](int M) { return M >= 4; });

  if (NumV2Elements == 1) {
    int V2Index = find_if(Mask, [](int M) { return M >= 4; }) - Mask.begin();

    // Compute the index adjacent to V2Index and in the same half by toggling
    // the low bit.
    int V2AdjIndex = V2Index ^ 1;

    if (Mask[V2AdjIndex] < 0) {
      // Handles all the cases where we have a single V2 element and an undef.
      // This will only ever happen in the high lanes because we commute the
      // vector otherwise.
      if (V2Index < 2)
        std::swap(LowV, HighV);
      NewMask[V2Index] -= 4;
    } else {
      // Handle the case where the V2 element ends up adjacent to a V1 element.
      // To make this work, blend them together as the first step.
      int V1Index = V2AdjIndex;
      int BlendMask[4] = {Mask[V2Index] - 4, 0, Mask[V1Index], 0};
      V2 = DAG.getNode(X86ISD::SHUFP, DL, VT, V2, V1,
                       getV4X86ShuffleImm8ForMask(BlendMask, DL, DAG));

      // Now proceed to reconstruct the final blend as we have the necessary
      // high or low half formed.
      if (V2Index < 2) {
        LowV = V2;
        HighV = V1;
      } else {
        HighV = V2;
      }
      NewMask[V1Index] = 2; // We put the V1 element in V2[2].
      NewMask[V2Index] = 0; // We shifted the V2 element into V2[0].
    }
  } else if (NumV2Elements == 2) {
    if (Mask[0] < 4 && Mask[1] < 4) {
      // Handle the easy case where we have V1 in the low lanes and V2 in the
      // high lanes.
      NewMask[2] -= 4;
      NewMask[3] -= 4;
    } else if (Mask[2] < 4 && Mask[3] < 4) {
      // We also handle the reversed case because this utility may get called
      // when we detect a SHUFPS pattern but can't easily commute the shuffle to
      // arrange things in the right direction.
      NewMask[0] -= 4;
      NewMask[1] -= 4;
      HighV = V1;
      LowV = V2;
    } else {
      // We have a mixture of V1 and V2 in both low and high lanes. Rather than
      // trying to place elements directly, just blend them and set up the final
      // shuffle to place them.

      // The first two blend mask elements are for V1, the second two are for
      // V2.
      int BlendMask[4] = {Mask[0] < 4 ? Mask[0] : Mask[1],
                          Mask[2] < 4 ? Mask[2] : Mask[3],
                          (Mask[0] >= 4 ? Mask[0] : Mask[1]) - 4,
                          (Mask[2] >= 4 ? Mask[2] : Mask[3]) - 4};
      V1 = DAG.getNode(X86ISD::SHUFP, DL, VT, V1, V2,
                       getV4X86ShuffleImm8ForMask(BlendMask, DL, DAG));

      // Now we do a normal shuffle of V1 by giving V1 as both operands to
      // a blend.
      LowV = HighV = V1;
      NewMask[0] = Mask[0] < 4 ? 0 : 2;
      NewMask[1] = Mask[0] < 4 ? 2 : 0;
      NewMask[2] = Mask[2] < 4 ? 1 : 3;
      NewMask[3] = Mask[2] < 4 ? 3 : 1;
    }
  }
  return DAG.getNode(X86ISD::SHUFP, DL, VT, LowV, HighV,
                     getV4X86ShuffleImm8ForMask(NewMask, DL, DAG));
}

/// \brief Lower 4-lane 32-bit floating point shuffles.
///
/// Uses instructions exclusively from the floating point unit to minimize
/// domain crossing penalties, as these are sufficient to implement all v4f32
/// shuffles.
static SDValue lowerV4F32VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                       const APInt &Zeroable,
                                       SDValue V1, SDValue V2,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v4f32 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v4f32 && "Bad operand type!");
  assert(Mask.size() == 4 && "Unexpected mask size for v4 shuffle!");

  int NumV2Elements = count_if(Mask, [](int M) { return M >= 4; });

  if (NumV2Elements == 0) {
    // Check for being able to broadcast a single element.
    if (SDValue Broadcast = lowerVectorShuffleAsBroadcast(
            DL, MVT::v4f32, V1, V2, Mask, Subtarget, DAG))
      return Broadcast;

    // Use even/odd duplicate instructions for masks that match their pattern.
    if (Subtarget.hasSSE3()) {
      if (isShuffleEquivalent(V1, V2, Mask, {0, 0, 2, 2}))
        return DAG.getNode(X86ISD::MOVSLDUP, DL, MVT::v4f32, V1);
      if (isShuffleEquivalent(V1, V2, Mask, {1, 1, 3, 3}))
        return DAG.getNode(X86ISD::MOVSHDUP, DL, MVT::v4f32, V1);
    }

    if (Subtarget.hasAVX()) {
      // If we have AVX, we can use VPERMILPS which will allow folding a load
      // into the shuffle.
      return DAG.getNode(X86ISD::VPERMILPI, DL, MVT::v4f32, V1,
                         getV4X86ShuffleImm8ForMask(Mask, DL, DAG));
    }

    // Use MOVLHPS/MOVHLPS to simulate unary shuffles. These are only valid
    // in SSE1 because otherwise they are widened to v2f64 and never get here.
    if (!Subtarget.hasSSE2()) {
      if (isShuffleEquivalent(V1, V2, Mask, {0, 1, 0, 1}))
        return DAG.getNode(X86ISD::MOVLHPS, DL, MVT::v4f32, V1, V1);
      if (isShuffleEquivalent(V1, V2, Mask, {2, 3, 2, 3}))
        return DAG.getNode(X86ISD::MOVHLPS, DL, MVT::v4f32, V1, V1);
    }

    // Otherwise, use a straight shuffle of a single input vector. We pass the
    // input vector to both operands to simulate this with a SHUFPS.
    return DAG.getNode(X86ISD::SHUFP, DL, MVT::v4f32, V1, V1,
                       getV4X86ShuffleImm8ForMask(Mask, DL, DAG));
  }

  // There are special ways we can lower some single-element blends. However, we
  // have custom ways we can lower more complex single-element blends below that
  // we defer to if both this and BLENDPS fail to match, so restrict this to
  // when the V2 input is targeting element 0 of the mask -- that is the fast
  // case here.
  if (NumV2Elements == 1 && Mask[0] >= 4)
    if (SDValue V = lowerVectorShuffleAsElementInsertion(
            DL, MVT::v4f32, V1, V2, Mask, Zeroable, Subtarget, DAG))
      return V;

  if (Subtarget.hasSSE41()) {
    if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v4f32, V1, V2, Mask,
                                                  Zeroable, Subtarget, DAG))
      return Blend;

    // Use INSERTPS if we can complete the shuffle efficiently.
    if (SDValue V =
            lowerVectorShuffleAsInsertPS(DL, V1, V2, Mask, Zeroable, DAG))
      return V;

    if (!isSingleSHUFPSMask(Mask))
      if (SDValue BlendPerm = lowerVectorShuffleAsBlendAndPermute(
              DL, MVT::v4f32, V1, V2, Mask, DAG))
        return BlendPerm;
  }

  // Use low/high mov instructions. These are only valid in SSE1 because
  // otherwise they are widened to v2f64 and never get here.
  if (!Subtarget.hasSSE2()) {
    if (isShuffleEquivalent(V1, V2, Mask, {0, 1, 4, 5}))
      return DAG.getNode(X86ISD::MOVLHPS, DL, MVT::v4f32, V1, V2);
    if (isShuffleEquivalent(V1, V2, Mask, {2, 3, 6, 7}))
      return DAG.getNode(X86ISD::MOVHLPS, DL, MVT::v4f32, V2, V1);
  }

  // Use dedicated unpack instructions for masks that match their pattern.
  if (SDValue V =
          lowerVectorShuffleWithUNPCK(DL, MVT::v4f32, Mask, V1, V2, DAG))
    return V;

  // Otherwise fall back to a SHUFPS lowering strategy.
  return lowerVectorShuffleWithSHUFPS(DL, MVT::v4f32, Mask, V1, V2, DAG);
}

/// \brief Lower 4-lane i32 vector shuffles.
///
/// We try to handle these with integer-domain shuffles where we can, but for
/// blends we use the floating point domain blend instructions.
static SDValue lowerV4I32VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                       const APInt &Zeroable,
                                       SDValue V1, SDValue V2,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v4i32 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v4i32 && "Bad operand type!");
  assert(Mask.size() == 4 && "Unexpected mask size for v4 shuffle!");

  // Whenever we can lower this as a zext, that instruction is strictly faster
  // than any alternative. It also allows us to fold memory operands into the
  // shuffle in many cases.
  if (SDValue ZExt = lowerVectorShuffleAsZeroOrAnyExtend(
          DL, MVT::v4i32, V1, V2, Mask, Zeroable, Subtarget, DAG))
    return ZExt;

  int NumV2Elements = count_if(Mask, [](int M) { return M >= 4; });

  if (NumV2Elements == 0) {
    // Check for being able to broadcast a single element.
    if (SDValue Broadcast = lowerVectorShuffleAsBroadcast(
            DL, MVT::v4i32, V1, V2, Mask, Subtarget, DAG))
      return Broadcast;

    // Straight shuffle of a single input vector. For everything from SSE2
    // onward this has a single fast instruction with no scary immediates.
    // We coerce the shuffle pattern to be compatible with UNPCK instructions
    // but we aren't actually going to use the UNPCK instruction because doing
    // so prevents folding a load into this instruction or making a copy.
    const int UnpackLoMask[] = {0, 0, 1, 1};
    const int UnpackHiMask[] = {2, 2, 3, 3};
    if (isShuffleEquivalent(V1, V2, Mask, {0, 0, 1, 1}))
      Mask = UnpackLoMask;
    else if (isShuffleEquivalent(V1, V2, Mask, {2, 2, 3, 3}))
      Mask = UnpackHiMask;

    return DAG.getNode(X86ISD::PSHUFD, DL, MVT::v4i32, V1,
                       getV4X86ShuffleImm8ForMask(Mask, DL, DAG));
  }

  // Try to use shift instructions.
  if (SDValue Shift = lowerVectorShuffleAsShift(DL, MVT::v4i32, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Shift;

  // There are special ways we can lower some single-element blends.
  if (NumV2Elements == 1)
    if (SDValue V = lowerVectorShuffleAsElementInsertion(
            DL, MVT::v4i32, V1, V2, Mask, Zeroable, Subtarget, DAG))
      return V;

  // We have different paths for blend lowering, but they all must use the
  // *exact* same predicate.
  bool IsBlendSupported = Subtarget.hasSSE41();
  if (IsBlendSupported)
    if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v4i32, V1, V2, Mask,
                                                  Zeroable, Subtarget, DAG))
      return Blend;

  if (SDValue Masked = lowerVectorShuffleAsBitMask(DL, MVT::v4i32, V1, V2, Mask,
                                                   Zeroable, DAG))
    return Masked;

  // Use dedicated unpack instructions for masks that match their pattern.
  if (SDValue V =
          lowerVectorShuffleWithUNPCK(DL, MVT::v4i32, Mask, V1, V2, DAG))
    return V;

  // Try to use byte rotation instructions.
  // Its more profitable for pre-SSSE3 to use shuffles/unpacks.
  if (Subtarget.hasSSSE3()) {
    if (Subtarget.hasVLX())
      if (SDValue Rotate = lowerVectorShuffleAsRotate(DL, MVT::v4i32, V1, V2,
                                                      Mask, Subtarget, DAG))
        return Rotate;

    if (SDValue Rotate = lowerVectorShuffleAsByteRotate(
            DL, MVT::v4i32, V1, V2, Mask, Subtarget, DAG))
      return Rotate;
  }

  // Assume that a single SHUFPS is faster than an alternative sequence of
  // multiple instructions (even if the CPU has a domain penalty).
  // If some CPU is harmed by the domain switch, we can fix it in a later pass.
  if (!isSingleSHUFPSMask(Mask)) {
    // If we have direct support for blends, we should lower by decomposing into
    // a permute. That will be faster than the domain cross.
    if (IsBlendSupported)
      return lowerVectorShuffleAsDecomposedShuffleBlend(DL, MVT::v4i32, V1, V2,
                                                        Mask, DAG);

    // Try to lower by permuting the inputs into an unpack instruction.
    if (SDValue Unpack = lowerVectorShuffleAsPermuteAndUnpack(
            DL, MVT::v4i32, V1, V2, Mask, DAG))
      return Unpack;
  }

  // We implement this with SHUFPS because it can blend from two vectors.
  // Because we're going to eventually use SHUFPS, we use SHUFPS even to build
  // up the inputs, bypassing domain shift penalties that we would incur if we
  // directly used PSHUFD on Nehalem and older. For newer chips, this isn't
  // relevant.
  SDValue CastV1 = DAG.getBitcast(MVT::v4f32, V1);
  SDValue CastV2 = DAG.getBitcast(MVT::v4f32, V2);
  SDValue ShufPS = DAG.getVectorShuffle(MVT::v4f32, DL, CastV1, CastV2, Mask);
  return DAG.getBitcast(MVT::v4i32, ShufPS);
}

/// \brief Lowering of single-input v8i16 shuffles is the cornerstone of SSE2
/// shuffle lowering, and the most complex part.
///
/// The lowering strategy is to try to form pairs of input lanes which are
/// targeted at the same half of the final vector, and then use a dword shuffle
/// to place them onto the right half, and finally unpack the paired lanes into
/// their final position.
///
/// The exact breakdown of how to form these dword pairs and align them on the
/// correct sides is really tricky. See the comments within the function for
/// more of the details.
///
/// This code also handles repeated 128-bit lanes of v8i16 shuffles, but each
/// lane must shuffle the *exact* same way. In fact, you must pass a v8 Mask to
/// this routine for it to work correctly. To shuffle a 256-bit or 512-bit i16
/// vector, form the analogous 128-bit 8-element Mask.
static SDValue lowerV8I16GeneralSingleInputVectorShuffle(
    const SDLoc &DL, MVT VT, SDValue V, MutableArrayRef<int> Mask,
    const X86Subtarget &Subtarget, SelectionDAG &DAG) {
  assert(VT.getVectorElementType() == MVT::i16 && "Bad input type!");
  MVT PSHUFDVT = MVT::getVectorVT(MVT::i32, VT.getVectorNumElements() / 2);

  assert(Mask.size() == 8 && "Shuffle mask length doesn't match!");
  MutableArrayRef<int> LoMask = Mask.slice(0, 4);
  MutableArrayRef<int> HiMask = Mask.slice(4, 4);

  SmallVector<int, 4> LoInputs;
  copy_if(LoMask, std::back_inserter(LoInputs), [](int M) { return M >= 0; });
  std::sort(LoInputs.begin(), LoInputs.end());
  LoInputs.erase(std::unique(LoInputs.begin(), LoInputs.end()), LoInputs.end());
  SmallVector<int, 4> HiInputs;
  copy_if(HiMask, std::back_inserter(HiInputs), [](int M) { return M >= 0; });
  std::sort(HiInputs.begin(), HiInputs.end());
  HiInputs.erase(std::unique(HiInputs.begin(), HiInputs.end()), HiInputs.end());
  int NumLToL =
      std::lower_bound(LoInputs.begin(), LoInputs.end(), 4) - LoInputs.begin();
  int NumHToL = LoInputs.size() - NumLToL;
  int NumLToH =
      std::lower_bound(HiInputs.begin(), HiInputs.end(), 4) - HiInputs.begin();
  int NumHToH = HiInputs.size() - NumLToH;
  MutableArrayRef<int> LToLInputs(LoInputs.data(), NumLToL);
  MutableArrayRef<int> LToHInputs(HiInputs.data(), NumLToH);
  MutableArrayRef<int> HToLInputs(LoInputs.data() + NumLToL, NumHToL);
  MutableArrayRef<int> HToHInputs(HiInputs.data() + NumLToH, NumHToH);

  // If we are splatting two values from one half - one to each half, then
  // we can shuffle that half so each is splatted to a dword, then splat those
  // to their respective halves.
  auto SplatHalfs = [&](int LoInput, int HiInput, unsigned ShufWOp,
                        int DOffset) {
    int PSHUFHalfMask[] = {LoInput % 4, LoInput % 4, HiInput % 4, HiInput % 4};
    int PSHUFDMask[] = {DOffset + 0, DOffset + 0, DOffset + 1, DOffset + 1};
    V = DAG.getNode(ShufWOp, DL, VT, V,
                    getV4X86ShuffleImm8ForMask(PSHUFHalfMask, DL, DAG));
    V = DAG.getBitcast(PSHUFDVT, V);
    V = DAG.getNode(X86ISD::PSHUFD, DL, PSHUFDVT, V,
                    getV4X86ShuffleImm8ForMask(PSHUFDMask, DL, DAG));
    return DAG.getBitcast(VT, V);
  };

  if (NumLToL == 1 && NumLToH == 1 && (NumHToL + NumHToH) == 0)
    return SplatHalfs(LToLInputs[0], LToHInputs[0], X86ISD::PSHUFLW, 0);
  if (NumHToL == 1 && NumHToH == 1 && (NumLToL + NumLToH) == 0)
    return SplatHalfs(HToLInputs[0], HToHInputs[0], X86ISD::PSHUFHW, 2);

  // Simplify the 1-into-3 and 3-into-1 cases with a single pshufd. For all
  // such inputs we can swap two of the dwords across the half mark and end up
  // with <=2 inputs to each half in each half. Once there, we can fall through
  // to the generic code below. For example:
  //
  // Input: [a, b, c, d, e, f, g, h] -PSHUFD[0,2,1,3]-> [a, b, e, f, c, d, g, h]
  // Mask:  [0, 1, 2, 7, 4, 5, 6, 3] -----------------> [0, 1, 4, 7, 2, 3, 6, 5]
  //
  // However in some very rare cases we have a 1-into-3 or 3-into-1 on one half
  // and an existing 2-into-2 on the other half. In this case we may have to
  // pre-shuffle the 2-into-2 half to avoid turning it into a 3-into-1 or
  // 1-into-3 which could cause us to cycle endlessly fixing each side in turn.
  // Fortunately, we don't have to handle anything but a 2-into-2 pattern
  // because any other situation (including a 3-into-1 or 1-into-3 in the other
  // half than the one we target for fixing) will be fixed when we re-enter this
  // path. We will also combine away any sequence of PSHUFD instructions that
  // result into a single instruction. Here is an example of the tricky case:
  //
  // Input: [a, b, c, d, e, f, g, h] -PSHUFD[0,2,1,3]-> [a, b, e, f, c, d, g, h]
  // Mask:  [3, 7, 1, 0, 2, 7, 3, 5] -THIS-IS-BAD!!!!-> [5, 7, 1, 0, 4, 7, 5, 3]
  //
  // This now has a 1-into-3 in the high half! Instead, we do two shuffles:
  //
  // Input: [a, b, c, d, e, f, g, h] PSHUFHW[0,2,1,3]-> [a, b, c, d, e, g, f, h]
  // Mask:  [3, 7, 1, 0, 2, 7, 3, 5] -----------------> [3, 7, 1, 0, 2, 7, 3, 6]
  //
  // Input: [a, b, c, d, e, g, f, h] -PSHUFD[0,2,1,3]-> [a, b, e, g, c, d, f, h]
  // Mask:  [3, 7, 1, 0, 2, 7, 3, 6] -----------------> [5, 7, 1, 0, 4, 7, 5, 6]
  //
  // The result is fine to be handled by the generic logic.
  auto balanceSides = [&](ArrayRef<int> AToAInputs, ArrayRef<int> BToAInputs,
                          ArrayRef<int> BToBInputs, ArrayRef<int> AToBInputs,
                          int AOffset, int BOffset) {
    assert((AToAInputs.size() == 3 || AToAInputs.size() == 1) &&
           "Must call this with A having 3 or 1 inputs from the A half.");
    assert((BToAInputs.size() == 1 || BToAInputs.size() == 3) &&
           "Must call this with B having 1 or 3 inputs from the B half.");
    assert(AToAInputs.size() + BToAInputs.size() == 4 &&
           "Must call this with either 3:1 or 1:3 inputs (summing to 4).");

    bool ThreeAInputs = AToAInputs.size() == 3;

    // Compute the index of dword with only one word among the three inputs in
    // a half by taking the sum of the half with three inputs and subtracting
    // the sum of the actual three inputs. The difference is the remaining
    // slot.
    int ADWord, BDWord;
    int &TripleDWord = ThreeAInputs ? ADWord : BDWord;
    int &OneInputDWord = ThreeAInputs ? BDWord : ADWord;
    int TripleInputOffset = ThreeAInputs ? AOffset : BOffset;
    ArrayRef<int> TripleInputs = ThreeAInputs ? AToAInputs : BToAInputs;
    int OneInput = ThreeAInputs ? BToAInputs[0] : AToAInputs[0];
    int TripleInputSum = 0 + 1 + 2 + 3 + (4 * TripleInputOffset);
    int TripleNonInputIdx =
        TripleInputSum - std::accumulate(TripleInputs.begin(), TripleInputs.end(), 0);
    TripleDWord = TripleNonInputIdx / 2;

    // We use xor with one to compute the adjacent DWord to whichever one the
    // OneInput is in.
    OneInputDWord = (OneInput / 2) ^ 1;

    // Check for one tricky case: We're fixing a 3<-1 or a 1<-3 shuffle for AToA
    // and BToA inputs. If there is also such a problem with the BToB and AToB
    // inputs, we don't try to fix it necessarily -- we'll recurse and see it in
    // the next pass. However, if we have a 2<-2 in the BToB and AToB inputs, it
    // is essential that we don't *create* a 3<-1 as then we might oscillate.
    if (BToBInputs.size() == 2 && AToBInputs.size() == 2) {
      // Compute how many inputs will be flipped by swapping these DWords. We
      // need
      // to balance this to ensure we don't form a 3-1 shuffle in the other
      // half.
      int NumFlippedAToBInputs =
          std::count(AToBInputs.begin(), AToBInputs.end(), 2 * ADWord) +
          std::count(AToBInputs.begin(), AToBInputs.end(), 2 * ADWord + 1);
      int NumFlippedBToBInputs =
          std::count(BToBInputs.begin(), BToBInputs.end(), 2 * BDWord) +
          std::count(BToBInputs.begin(), BToBInputs.end(), 2 * BDWord + 1);
      if ((NumFlippedAToBInputs == 1 &&
           (NumFlippedBToBInputs == 0 || NumFlippedBToBInputs == 2)) ||
          (NumFlippedBToBInputs == 1 &&
           (NumFlippedAToBInputs == 0 || NumFlippedAToBInputs == 2))) {
        // We choose whether to fix the A half or B half based on whether that
        // half has zero flipped inputs. At zero, we may not be able to fix it
        // with that half. We also bias towards fixing the B half because that
        // will more commonly be the high half, and we have to bias one way.
        auto FixFlippedInputs = [&V, &DL, &Mask, &DAG](int PinnedIdx, int DWord,
                                                       ArrayRef<int> Inputs) {
          int FixIdx = PinnedIdx ^ 1; // The adjacent slot to the pinned slot.
          bool IsFixIdxInput = is_contained(Inputs, PinnedIdx ^ 1);
          // Determine whether the free index is in the flipped dword or the
          // unflipped dword based on where the pinned index is. We use this bit
          // in an xor to conditionally select the adjacent dword.
          int FixFreeIdx = 2 * (DWord ^ (PinnedIdx / 2 == DWord));
          bool IsFixFreeIdxInput = is_contained(Inputs, FixFreeIdx);
          if (IsFixIdxInput == IsFixFreeIdxInput)
            FixFreeIdx += 1;
          IsFixFreeIdxInput = is_contained(Inputs, FixFreeIdx);
          assert(IsFixIdxInput != IsFixFreeIdxInput &&
                 "We need to be changing the number of flipped inputs!");
          int PSHUFHalfMask[] = {0, 1, 2, 3};
          std::swap(PSHUFHalfMask[FixFreeIdx % 4], PSHUFHalfMask[FixIdx % 4]);
          V = DAG.getNode(
              FixIdx < 4 ? X86ISD::PSHUFLW : X86ISD::PSHUFHW, DL,
              MVT::getVectorVT(MVT::i16, V.getValueSizeInBits() / 16), V,
              getV4X86ShuffleImm8ForMask(PSHUFHalfMask, DL, DAG));

          for (int &M : Mask)
            if (M >= 0 && M == FixIdx)
              M = FixFreeIdx;
            else if (M >= 0 && M == FixFreeIdx)
              M = FixIdx;
        };
        if (NumFlippedBToBInputs != 0) {
          int BPinnedIdx =
              BToAInputs.size() == 3 ? TripleNonInputIdx : OneInput;
          FixFlippedInputs(BPinnedIdx, BDWord, BToBInputs);
        } else {
          assert(NumFlippedAToBInputs != 0 && "Impossible given predicates!");
          int APinnedIdx = ThreeAInputs ? TripleNonInputIdx : OneInput;
          FixFlippedInputs(APinnedIdx, ADWord, AToBInputs);
        }
      }
    }

    int PSHUFDMask[] = {0, 1, 2, 3};
    PSHUFDMask[ADWord] = BDWord;
    PSHUFDMask[BDWord] = ADWord;
    V = DAG.getBitcast(
        VT,
        DAG.getNode(X86ISD::PSHUFD, DL, PSHUFDVT, DAG.getBitcast(PSHUFDVT, V),
                    getV4X86ShuffleImm8ForMask(PSHUFDMask, DL, DAG)));

    // Adjust the mask to match the new locations of A and B.
    for (int &M : Mask)
      if (M >= 0 && M/2 == ADWord)
        M = 2 * BDWord + M % 2;
      else if (M >= 0 && M/2 == BDWord)
        M = 2 * ADWord + M % 2;

    // Recurse back into this routine to re-compute state now that this isn't
    // a 3 and 1 problem.
    return lowerV8I16GeneralSingleInputVectorShuffle(DL, VT, V, Mask, Subtarget,
                                                     DAG);
  };
  if ((NumLToL == 3 && NumHToL == 1) || (NumLToL == 1 && NumHToL == 3))
    return balanceSides(LToLInputs, HToLInputs, HToHInputs, LToHInputs, 0, 4);
  if ((NumHToH == 3 && NumLToH == 1) || (NumHToH == 1 && NumLToH == 3))
    return balanceSides(HToHInputs, LToHInputs, LToLInputs, HToLInputs, 4, 0);

  // At this point there are at most two inputs to the low and high halves from
  // each half. That means the inputs can always be grouped into dwords and
  // those dwords can then be moved to the correct half with a dword shuffle.
  // We use at most one low and one high word shuffle to collect these paired
  // inputs into dwords, and finally a dword shuffle to place them.
  int PSHUFLMask[4] = {-1, -1, -1, -1};
  int PSHUFHMask[4] = {-1, -1, -1, -1};
  int PSHUFDMask[4] = {-1, -1, -1, -1};

  // First fix the masks for all the inputs that are staying in their
  // original halves. This will then dictate the targets of the cross-half
  // shuffles.
  auto fixInPlaceInputs =
      [&PSHUFDMask](ArrayRef<int> InPlaceInputs, ArrayRef<int> IncomingInputs,
                    MutableArrayRef<int> SourceHalfMask,
                    MutableArrayRef<int> HalfMask, int HalfOffset) {
    if (InPlaceInputs.empty())
      return;
    if (InPlaceInputs.size() == 1) {
      SourceHalfMask[InPlaceInputs[0] - HalfOffset] =
          InPlaceInputs[0] - HalfOffset;
      PSHUFDMask[InPlaceInputs[0] / 2] = InPlaceInputs[0] / 2;
      return;
    }
    if (IncomingInputs.empty()) {
      // Just fix all of the in place inputs.
      for (int Input : InPlaceInputs) {
        SourceHalfMask[Input - HalfOffset] = Input - HalfOffset;
        PSHUFDMask[Input / 2] = Input / 2;
      }
      return;
    }

    assert(InPlaceInputs.size() == 2 && "Cannot handle 3 or 4 inputs!");
    SourceHalfMask[InPlaceInputs[0] - HalfOffset] =
        InPlaceInputs[0] - HalfOffset;
    // Put the second input next to the first so that they are packed into
    // a dword. We find the adjacent index by toggling the low bit.
    int AdjIndex = InPlaceInputs[0] ^ 1;
    SourceHalfMask[AdjIndex - HalfOffset] = InPlaceInputs[1] - HalfOffset;
    std::replace(HalfMask.begin(), HalfMask.end(), InPlaceInputs[1], AdjIndex);
    PSHUFDMask[AdjIndex / 2] = AdjIndex / 2;
  };
  fixInPlaceInputs(LToLInputs, HToLInputs, PSHUFLMask, LoMask, 0);
  fixInPlaceInputs(HToHInputs, LToHInputs, PSHUFHMask, HiMask, 4);

  // Now gather the cross-half inputs and place them into a free dword of
  // their target half.
  // FIXME: This operation could almost certainly be simplified dramatically to
  // look more like the 3-1 fixing operation.
  auto moveInputsToRightHalf = [&PSHUFDMask](
      MutableArrayRef<int> IncomingInputs, ArrayRef<int> ExistingInputs,
      MutableArrayRef<int> SourceHalfMask, MutableArrayRef<int> HalfMask,
      MutableArrayRef<int> FinalSourceHalfMask, int SourceOffset,
      int DestOffset) {
    auto isWordClobbered = [](ArrayRef<int> SourceHalfMask, int Word) {
      return SourceHalfMask[Word] >= 0 && SourceHalfMask[Word] != Word;
    };
    auto isDWordClobbered = [&isWordClobbered](ArrayRef<int> SourceHalfMask,
                                               int Word) {
      int LowWord = Word & ~1;
      int HighWord = Word | 1;
      return isWordClobbered(SourceHalfMask, LowWord) ||
             isWordClobbered(SourceHalfMask, HighWord);
    };

    if (IncomingInputs.empty())
      return;

    if (ExistingInputs.empty()) {
      // Map any dwords with inputs from them into the right half.
      for (int Input : IncomingInputs) {
        // If the source half mask maps over the inputs, turn those into
        // swaps and use the swapped lane.
        if (isWordClobbered(SourceHalfMask, Input - SourceOffset)) {
          if (SourceHalfMask[SourceHalfMask[Input - SourceOffset]] < 0) {
            SourceHalfMask[SourceHalfMask[Input - SourceOffset]] =
                Input - SourceOffset;
            // We have to swap the uses in our half mask in one sweep.
            for (int &M : HalfMask)
              if (M == SourceHalfMask[Input - SourceOffset] + SourceOffset)
                M = Input;
              else if (M == Input)
                M = SourceHalfMask[Input - SourceOffset] + SourceOffset;
          } else {
            assert(SourceHalfMask[SourceHalfMask[Input - SourceOffset]] ==
                       Input - SourceOffset &&
                   "Previous placement doesn't match!");
          }
          // Note that this correctly re-maps both when we do a swap and when
          // we observe the other side of the swap above. We rely on that to
          // avoid swapping the members of the input list directly.
          Input = SourceHalfMask[Input - SourceOffset] + SourceOffset;
        }

        // Map the input's dword into the correct half.
        if (PSHUFDMask[(Input - SourceOffset + DestOffset) / 2] < 0)
          PSHUFDMask[(Input - SourceOffset + DestOffset) / 2] = Input / 2;
        else
          assert(PSHUFDMask[(Input - SourceOffset + DestOffset) / 2] ==
                     Input / 2 &&
                 "Previous placement doesn't match!");
      }

      // And just directly shift any other-half mask elements to be same-half
      // as we will have mirrored the dword containing the element into the
      // same position within that half.
      for (int &M : HalfMask)
        if (M >= SourceOffset && M < SourceOffset + 4) {
          M = M - SourceOffset + DestOffset;
          assert(M >= 0 && "This should never wrap below zero!");
        }
      return;
    }

    // Ensure we have the input in a viable dword of its current half. This
    // is particularly tricky because the original position may be clobbered
    // by inputs being moved and *staying* in that half.
    if (IncomingInputs.size() == 1) {
      if (isWordClobbered(SourceHalfMask, IncomingInputs[0] - SourceOffset)) {
        int InputFixed = find(SourceHalfMask, -1) - std::begin(SourceHalfMask) +
                         SourceOffset;
        SourceHalfMask[InputFixed - SourceOffset] =
            IncomingInputs[0] - SourceOffset;
        std::replace(HalfMask.begin(), HalfMask.end(), IncomingInputs[0],
                     InputFixed);
        IncomingInputs[0] = InputFixed;
      }
    } else if (IncomingInputs.size() == 2) {
      if (IncomingInputs[0] / 2 != IncomingInputs[1] / 2 ||
          isDWordClobbered(SourceHalfMask, IncomingInputs[0] - SourceOffset)) {
        // We have two non-adjacent or clobbered inputs we need to extract from
        // the source half. To do this, we need to map them into some adjacent
        // dword slot in the source mask.
        int InputsFixed[2] = {IncomingInputs[0] - SourceOffset,
                              IncomingInputs[1] - SourceOffset};

        // If there is a free slot in the source half mask adjacent to one of
        // the inputs, place the other input in it. We use (Index XOR 1) to
        // compute an adjacent index.
        if (!isWordClobbered(SourceHalfMask, InputsFixed[0]) &&
            SourceHalfMask[InputsFixed[0] ^ 1] < 0) {
          SourceHalfMask[InputsFixed[0]] = InputsFixed[0];
          SourceHalfMask[InputsFixed[0] ^ 1] = InputsFixed[1];
          InputsFixed[1] = InputsFixed[0] ^ 1;
        } else if (!isWordClobbered(SourceHalfMask, InputsFixed[1]) &&
                   SourceHalfMask[InputsFixed[1] ^ 1] < 0) {
          SourceHalfMask[InputsFixed[1]] = InputsFixed[1];
          SourceHalfMask[InputsFixed[1] ^ 1] = InputsFixed[0];
          InputsFixed[0] = InputsFixed[1] ^ 1;
        } else if (SourceHalfMask[2 * ((InputsFixed[0] / 2) ^ 1)] < 0 &&
                   SourceHalfMask[2 * ((InputsFixed[0] / 2) ^ 1) + 1] < 0) {
          // The two inputs are in the same DWord but it is clobbered and the
          // adjacent DWord isn't used at all. Move both inputs to the free
          // slot.
          SourceHalfMask[2 * ((InputsFixed[0] / 2) ^ 1)] = InputsFixed[0];
          SourceHalfMask[2 * ((InputsFixed[0] / 2) ^ 1) + 1] = InputsFixed[1];
          InputsFixed[0] = 2 * ((InputsFixed[0] / 2) ^ 1);
          InputsFixed[1] = 2 * ((InputsFixed[0] / 2) ^ 1) + 1;
        } else {
          // The only way we hit this point is if there is no clobbering
          // (because there are no off-half inputs to this half) and there is no
          // free slot adjacent to one of the inputs. In this case, we have to
          // swap an input with a non-input.
          for (int i = 0; i < 4; ++i)
            assert((SourceHalfMask[i] < 0 || SourceHalfMask[i] == i) &&
                   "We can't handle any clobbers here!");
          assert(InputsFixed[1] != (InputsFixed[0] ^ 1) &&
                 "Cannot have adjacent inputs here!");

          SourceHalfMask[InputsFixed[0] ^ 1] = InputsFixed[1];
          SourceHalfMask[InputsFixed[1]] = InputsFixed[0] ^ 1;

          // We also have to update the final source mask in this case because
          // it may need to undo the above swap.
          for (int &M : FinalSourceHalfMask)
            if (M == (InputsFixed[0] ^ 1) + SourceOffset)
              M = InputsFixed[1] + SourceOffset;
            else if (M == InputsFixed[1] + SourceOffset)
              M = (InputsFixed[0] ^ 1) + SourceOffset;

          InputsFixed[1] = InputsFixed[0] ^ 1;
        }

        // Point everything at the fixed inputs.
        for (int &M : HalfMask)
          if (M == IncomingInputs[0])
            M = InputsFixed[0] + SourceOffset;
          else if (M == IncomingInputs[1])
            M = InputsFixed[1] + SourceOffset;

        IncomingInputs[0] = InputsFixed[0] + SourceOffset;
        IncomingInputs[1] = InputsFixed[1] + SourceOffset;
      }
    } else {
      llvm_unreachable("Unhandled input size!");
    }

    // Now hoist the DWord down to the right half.
    int FreeDWord = (PSHUFDMask[DestOffset / 2] < 0 ? 0 : 1) + DestOffset / 2;
    assert(PSHUFDMask[FreeDWord] < 0 && "DWord not free");
    PSHUFDMask[FreeDWord] = IncomingInputs[0] / 2;
    for (int &M : HalfMask)
      for (int Input : IncomingInputs)
        if (M == Input)
          M = FreeDWord * 2 + Input % 2;
  };
  moveInputsToRightHalf(HToLInputs, LToLInputs, PSHUFHMask, LoMask, HiMask,
                        /*SourceOffset*/ 4, /*DestOffset*/ 0);
  moveInputsToRightHalf(LToHInputs, HToHInputs, PSHUFLMask, HiMask, LoMask,
                        /*SourceOffset*/ 0, /*DestOffset*/ 4);

  // Now enact all the shuffles we've computed to move the inputs into their
  // target half.
  if (!isNoopShuffleMask(PSHUFLMask))
    V = DAG.getNode(X86ISD::PSHUFLW, DL, VT, V,
                    getV4X86ShuffleImm8ForMask(PSHUFLMask, DL, DAG));
  if (!isNoopShuffleMask(PSHUFHMask))
    V = DAG.getNode(X86ISD::PSHUFHW, DL, VT, V,
                    getV4X86ShuffleImm8ForMask(PSHUFHMask, DL, DAG));
  if (!isNoopShuffleMask(PSHUFDMask))
    V = DAG.getBitcast(
        VT,
        DAG.getNode(X86ISD::PSHUFD, DL, PSHUFDVT, DAG.getBitcast(PSHUFDVT, V),
                    getV4X86ShuffleImm8ForMask(PSHUFDMask, DL, DAG)));

  // At this point, each half should contain all its inputs, and we can then
  // just shuffle them into their final position.
  assert(count_if(LoMask, [](int M) { return M >= 4; }) == 0 &&
         "Failed to lift all the high half inputs to the low mask!");
  assert(count_if(HiMask, [](int M) { return M >= 0 && M < 4; }) == 0 &&
         "Failed to lift all the low half inputs to the high mask!");

  // Do a half shuffle for the low mask.
  if (!isNoopShuffleMask(LoMask))
    V = DAG.getNode(X86ISD::PSHUFLW, DL, VT, V,
                    getV4X86ShuffleImm8ForMask(LoMask, DL, DAG));

  // Do a half shuffle with the high mask after shifting its values down.
  for (int &M : HiMask)
    if (M >= 0)
      M -= 4;
  if (!isNoopShuffleMask(HiMask))
    V = DAG.getNode(X86ISD::PSHUFHW, DL, VT, V,
                    getV4X86ShuffleImm8ForMask(HiMask, DL, DAG));

  return V;
}

/// Helper to form a PSHUFB-based shuffle+blend, opportunistically avoiding the
/// blend if only one input is used.
static SDValue lowerVectorShuffleAsBlendOfPSHUFBs(
    const SDLoc &DL, MVT VT, SDValue V1, SDValue V2, ArrayRef<int> Mask,
    const APInt &Zeroable, SelectionDAG &DAG, bool &V1InUse,
    bool &V2InUse) {
  SDValue V1Mask[16];
  SDValue V2Mask[16];
  V1InUse = false;
  V2InUse = false;

  int Size = Mask.size();
  int Scale = 16 / Size;
  for (int i = 0; i < 16; ++i) {
    if (Mask[i / Scale] < 0) {
      V1Mask[i] = V2Mask[i] = DAG.getUNDEF(MVT::i8);
    } else {
      const int ZeroMask = 0x80;
      int V1Idx = Mask[i / Scale] < Size ? Mask[i / Scale] * Scale + i % Scale
                                          : ZeroMask;
      int V2Idx = Mask[i / Scale] < Size
                      ? ZeroMask
                      : (Mask[i / Scale] - Size) * Scale + i % Scale;
      if (Zeroable[i / Scale])
        V1Idx = V2Idx = ZeroMask;
      V1Mask[i] = DAG.getConstant(V1Idx, DL, MVT::i8);
      V2Mask[i] = DAG.getConstant(V2Idx, DL, MVT::i8);
      V1InUse |= (ZeroMask != V1Idx);
      V2InUse |= (ZeroMask != V2Idx);
    }
  }

  if (V1InUse)
    V1 = DAG.getNode(X86ISD::PSHUFB, DL, MVT::v16i8,
                     DAG.getBitcast(MVT::v16i8, V1),
                     DAG.getBuildVector(MVT::v16i8, DL, V1Mask));
  if (V2InUse)
    V2 = DAG.getNode(X86ISD::PSHUFB, DL, MVT::v16i8,
                     DAG.getBitcast(MVT::v16i8, V2),
                     DAG.getBuildVector(MVT::v16i8, DL, V2Mask));

  // If we need shuffled inputs from both, blend the two.
  SDValue V;
  if (V1InUse && V2InUse)
    V = DAG.getNode(ISD::OR, DL, MVT::v16i8, V1, V2);
  else
    V = V1InUse ? V1 : V2;

  // Cast the result back to the correct type.
  return DAG.getBitcast(VT, V);
}

/// \brief Generic lowering of 8-lane i16 shuffles.
///
/// This handles both single-input shuffles and combined shuffle/blends with
/// two inputs. The single input shuffles are immediately delegated to
/// a dedicated lowering routine.
///
/// The blends are lowered in one of three fundamental ways. If there are few
/// enough inputs, it delegates to a basic UNPCK-based strategy. If the shuffle
/// of the input is significantly cheaper when lowered as an interleaving of
/// the two inputs, try to interleave them. Otherwise, blend the low and high
/// halves of the inputs separately (making them have relatively few inputs)
/// and then concatenate them.
static SDValue lowerV8I16VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                       const APInt &Zeroable,
                                       SDValue V1, SDValue V2,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v8i16 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v8i16 && "Bad operand type!");
  assert(Mask.size() == 8 && "Unexpected mask size for v8 shuffle!");

  // Whenever we can lower this as a zext, that instruction is strictly faster
  // than any alternative.
  if (SDValue ZExt = lowerVectorShuffleAsZeroOrAnyExtend(
          DL, MVT::v8i16, V1, V2, Mask, Zeroable, Subtarget, DAG))
    return ZExt;

  int NumV2Inputs = count_if(Mask, [](int M) { return M >= 8; });

  if (NumV2Inputs == 0) {
    // Check for being able to broadcast a single element.
    if (SDValue Broadcast = lowerVectorShuffleAsBroadcast(
            DL, MVT::v8i16, V1, V2, Mask, Subtarget, DAG))
      return Broadcast;

    // Try to use shift instructions.
    if (SDValue Shift = lowerVectorShuffleAsShift(DL, MVT::v8i16, V1, V1, Mask,
                                                  Zeroable, Subtarget, DAG))
      return Shift;

    // Use dedicated unpack instructions for masks that match their pattern.
    if (SDValue V =
            lowerVectorShuffleWithUNPCK(DL, MVT::v8i16, Mask, V1, V2, DAG))
      return V;

    // Use dedicated pack instructions for masks that match their pattern.
    if (SDValue V = lowerVectorShuffleWithPACK(DL, MVT::v8i16, Mask, V1, V2,
                                               DAG, Subtarget))
      return V;

    // Try to use byte rotation instructions.
    if (SDValue Rotate = lowerVectorShuffleAsByteRotate(DL, MVT::v8i16, V1, V1,
                                                        Mask, Subtarget, DAG))
      return Rotate;

    // Make a copy of the mask so it can be modified.
    SmallVector<int, 8> MutableMask(Mask.begin(), Mask.end());
    return lowerV8I16GeneralSingleInputVectorShuffle(DL, MVT::v8i16, V1,
                                                     MutableMask, Subtarget,
                                                     DAG);
  }

  assert(llvm::any_of(Mask, [](int M) { return M >= 0 && M < 8; }) &&
         "All single-input shuffles should be canonicalized to be V1-input "
         "shuffles.");

  // Try to use shift instructions.
  if (SDValue Shift = lowerVectorShuffleAsShift(DL, MVT::v8i16, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Shift;

  // See if we can use SSE4A Extraction / Insertion.
  if (Subtarget.hasSSE4A())
    if (SDValue V = lowerVectorShuffleWithSSE4A(DL, MVT::v8i16, V1, V2, Mask,
                                                Zeroable, DAG))
      return V;

  // There are special ways we can lower some single-element blends.
  if (NumV2Inputs == 1)
    if (SDValue V = lowerVectorShuffleAsElementInsertion(
            DL, MVT::v8i16, V1, V2, Mask, Zeroable, Subtarget, DAG))
      return V;

  // We have different paths for blend lowering, but they all must use the
  // *exact* same predicate.
  bool IsBlendSupported = Subtarget.hasSSE41();
  if (IsBlendSupported)
    if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v8i16, V1, V2, Mask,
                                                  Zeroable, Subtarget, DAG))
      return Blend;

  if (SDValue Masked = lowerVectorShuffleAsBitMask(DL, MVT::v8i16, V1, V2, Mask,
                                                   Zeroable, DAG))
    return Masked;

  // Use dedicated unpack instructions for masks that match their pattern.
  if (SDValue V =
          lowerVectorShuffleWithUNPCK(DL, MVT::v8i16, Mask, V1, V2, DAG))
    return V;

  // Use dedicated pack instructions for masks that match their pattern.
  if (SDValue V = lowerVectorShuffleWithPACK(DL, MVT::v8i16, Mask, V1, V2, DAG,
                                             Subtarget))
    return V;

  // Try to use byte rotation instructions.
  if (SDValue Rotate = lowerVectorShuffleAsByteRotate(
          DL, MVT::v8i16, V1, V2, Mask, Subtarget, DAG))
    return Rotate;

  if (SDValue BitBlend =
          lowerVectorShuffleAsBitBlend(DL, MVT::v8i16, V1, V2, Mask, DAG))
    return BitBlend;

  // Try to lower by permuting the inputs into an unpack instruction.
  if (SDValue Unpack = lowerVectorShuffleAsPermuteAndUnpack(DL, MVT::v8i16, V1,
                                                            V2, Mask, DAG))
    return Unpack;

  // If we can't directly blend but can use PSHUFB, that will be better as it
  // can both shuffle and set up the inefficient blend.
  if (!IsBlendSupported && Subtarget.hasSSSE3()) {
    bool V1InUse, V2InUse;
    return lowerVectorShuffleAsBlendOfPSHUFBs(DL, MVT::v8i16, V1, V2, Mask,
                                              Zeroable, DAG, V1InUse, V2InUse);
  }

  // We can always bit-blend if we have to so the fallback strategy is to
  // decompose into single-input permutes and blends.
  return lowerVectorShuffleAsDecomposedShuffleBlend(DL, MVT::v8i16, V1, V2,
                                                    Mask, DAG);
}

/// \brief Check whether a compaction lowering can be done by dropping even
/// elements and compute how many times even elements must be dropped.
///
/// This handles shuffles which take every Nth element where N is a power of
/// two. Example shuffle masks:
///
///  N = 1:  0,  2,  4,  6,  8, 10, 12, 14,  0,  2,  4,  6,  8, 10, 12, 14
///  N = 1:  0,  2,  4,  6,  8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30
///  N = 2:  0,  4,  8, 12,  0,  4,  8, 12,  0,  4,  8, 12,  0,  4,  8, 12
///  N = 2:  0,  4,  8, 12, 16, 20, 24, 28,  0,  4,  8, 12, 16, 20, 24, 28
///  N = 3:  0,  8,  0,  8,  0,  8,  0,  8,  0,  8,  0,  8,  0,  8,  0,  8
///  N = 3:  0,  8, 16, 24,  0,  8, 16, 24,  0,  8, 16, 24,  0,  8, 16, 24
///
/// Any of these lanes can of course be undef.
///
/// This routine only supports N <= 3.
/// FIXME: Evaluate whether either AVX or AVX-512 have any opportunities here
/// for larger N.
///
/// \returns N above, or the number of times even elements must be dropped if
/// there is such a number. Otherwise returns zero.
static int canLowerByDroppingEvenElements(ArrayRef<int> Mask,
                                          bool IsSingleInput) {
  // The modulus for the shuffle vector entries is based on whether this is
  // a single input or not.
  int ShuffleModulus = Mask.size() * (IsSingleInput ? 1 : 2);
  assert(isPowerOf2_32((uint32_t)ShuffleModulus) &&
         "We should only be called with masks with a power-of-2 size!");

  uint64_t ModMask = (uint64_t)ShuffleModulus - 1;

  // We track whether the input is viable for all power-of-2 strides 2^1, 2^2,
  // and 2^3 simultaneously. This is because we may have ambiguity with
  // partially undef inputs.
  bool ViableForN[3] = {true, true, true};

  for (int i = 0, e = Mask.size(); i < e; ++i) {
    // Ignore undef lanes, we'll optimistically collapse them to the pattern we
    // want.
    if (Mask[i] < 0)
      continue;

    bool IsAnyViable = false;
    for (unsigned j = 0; j != array_lengthof(ViableForN); ++j)
      if (ViableForN[j]) {
        uint64_t N = j + 1;

        // The shuffle mask must be equal to (i * 2^N) % M.
        if ((uint64_t)Mask[i] == (((uint64_t)i << N) & ModMask))
          IsAnyViable = true;
        else
          ViableForN[j] = false;
      }
    // Early exit if we exhaust the possible powers of two.
    if (!IsAnyViable)
      break;
  }

  for (unsigned j = 0; j != array_lengthof(ViableForN); ++j)
    if (ViableForN[j])
      return j + 1;

  // Return 0 as there is no viable power of two.
  return 0;
}

/// \brief Generic lowering of v16i8 shuffles.
///
/// This is a hybrid strategy to lower v16i8 vectors. It first attempts to
/// detect any complexity reducing interleaving. If that doesn't help, it uses
/// UNPCK to spread the i8 elements across two i16-element vectors, and uses
/// the existing lowering for v8i16 blends on each half, finally PACK-ing them
/// back together.
static SDValue lowerV16I8VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                       const APInt &Zeroable,
                                       SDValue V1, SDValue V2,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v16i8 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v16i8 && "Bad operand type!");
  assert(Mask.size() == 16 && "Unexpected mask size for v16 shuffle!");

  // Try to use shift instructions.
  if (SDValue Shift = lowerVectorShuffleAsShift(DL, MVT::v16i8, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Shift;

  // Try to use byte rotation instructions.
  if (SDValue Rotate = lowerVectorShuffleAsByteRotate(
          DL, MVT::v16i8, V1, V2, Mask, Subtarget, DAG))
    return Rotate;

  // Use dedicated pack instructions for masks that match their pattern.
  if (SDValue V = lowerVectorShuffleWithPACK(DL, MVT::v16i8, Mask, V1, V2, DAG,
                                             Subtarget))
    return V;

  // Try to use a zext lowering.
  if (SDValue ZExt = lowerVectorShuffleAsZeroOrAnyExtend(
          DL, MVT::v16i8, V1, V2, Mask, Zeroable, Subtarget, DAG))
    return ZExt;

  // See if we can use SSE4A Extraction / Insertion.
  if (Subtarget.hasSSE4A())
    if (SDValue V = lowerVectorShuffleWithSSE4A(DL, MVT::v16i8, V1, V2, Mask,
                                                Zeroable, DAG))
      return V;

  int NumV2Elements = count_if(Mask, [](int M) { return M >= 16; });

  // For single-input shuffles, there are some nicer lowering tricks we can use.
  if (NumV2Elements == 0) {
    // Check for being able to broadcast a single element.
    if (SDValue Broadcast = lowerVectorShuffleAsBroadcast(
            DL, MVT::v16i8, V1, V2, Mask, Subtarget, DAG))
      return Broadcast;

    // Check whether we can widen this to an i16 shuffle by duplicating bytes.
    // Notably, this handles splat and partial-splat shuffles more efficiently.
    // However, it only makes sense if the pre-duplication shuffle simplifies
    // things significantly. Currently, this means we need to be able to
    // express the pre-duplication shuffle as an i16 shuffle.
    //
    // FIXME: We should check for other patterns which can be widened into an
    // i16 shuffle as well.
    auto canWidenViaDuplication = [](ArrayRef<int> Mask) {
      for (int i = 0; i < 16; i += 2)
        if (Mask[i] >= 0 && Mask[i + 1] >= 0 && Mask[i] != Mask[i + 1])
          return false;

      return true;
    };
    auto tryToWidenViaDuplication = [&]() -> SDValue {
      if (!canWidenViaDuplication(Mask))
        return SDValue();
      SmallVector<int, 4> LoInputs;
      copy_if(Mask, std::back_inserter(LoInputs),
              [](int M) { return M >= 0 && M < 8; });
      std::sort(LoInputs.begin(), LoInputs.end());
      LoInputs.erase(std::unique(LoInputs.begin(), LoInputs.end()),
                     LoInputs.end());
      SmallVector<int, 4> HiInputs;
      copy_if(Mask, std::back_inserter(HiInputs), [](int M) { return M >= 8; });
      std::sort(HiInputs.begin(), HiInputs.end());
      HiInputs.erase(std::unique(HiInputs.begin(), HiInputs.end()),
                     HiInputs.end());

      bool TargetLo = LoInputs.size() >= HiInputs.size();
      ArrayRef<int> InPlaceInputs = TargetLo ? LoInputs : HiInputs;
      ArrayRef<int> MovingInputs = TargetLo ? HiInputs : LoInputs;

      int PreDupI16Shuffle[] = {-1, -1, -1, -1, -1, -1, -1, -1};
      SmallDenseMap<int, int, 8> LaneMap;
      for (int I : InPlaceInputs) {
        PreDupI16Shuffle[I/2] = I/2;
        LaneMap[I] = I;
      }
      int j = TargetLo ? 0 : 4, je = j + 4;
      for (int i = 0, ie = MovingInputs.size(); i < ie; ++i) {
        // Check if j is already a shuffle of this input. This happens when
        // there are two adjacent bytes after we move the low one.
        if (PreDupI16Shuffle[j] != MovingInputs[i] / 2) {
          // If we haven't yet mapped the input, search for a slot into which
          // we can map it.
          while (j < je && PreDupI16Shuffle[j] >= 0)
            ++j;

          if (j == je)
            // We can't place the inputs into a single half with a simple i16 shuffle, so bail.
            return SDValue();

          // Map this input with the i16 shuffle.
          PreDupI16Shuffle[j] = MovingInputs[i] / 2;
        }

        // Update the lane map based on the mapping we ended up with.
        LaneMap[MovingInputs[i]] = 2 * j + MovingInputs[i] % 2;
      }
      V1 = DAG.getBitcast(
          MVT::v16i8,
          DAG.getVectorShuffle(MVT::v8i16, DL, DAG.getBitcast(MVT::v8i16, V1),
                               DAG.getUNDEF(MVT::v8i16), PreDupI16Shuffle));

      // Unpack the bytes to form the i16s that will be shuffled into place.
      V1 = DAG.getNode(TargetLo ? X86ISD::UNPCKL : X86ISD::UNPCKH, DL,
                       MVT::v16i8, V1, V1);

      int PostDupI16Shuffle[8] = {-1, -1, -1, -1, -1, -1, -1, -1};
      for (int i = 0; i < 16; ++i)
        if (Mask[i] >= 0) {
          int MappedMask = LaneMap[Mask[i]] - (TargetLo ? 0 : 8);
          assert(MappedMask < 8 && "Invalid v8 shuffle mask!");
          if (PostDupI16Shuffle[i / 2] < 0)
            PostDupI16Shuffle[i / 2] = MappedMask;
          else
            assert(PostDupI16Shuffle[i / 2] == MappedMask &&
                   "Conflicting entries in the original shuffle!");
        }
      return DAG.getBitcast(
          MVT::v16i8,
          DAG.getVectorShuffle(MVT::v8i16, DL, DAG.getBitcast(MVT::v8i16, V1),
                               DAG.getUNDEF(MVT::v8i16), PostDupI16Shuffle));
    };
    if (SDValue V = tryToWidenViaDuplication())
      return V;
  }

  if (SDValue Masked = lowerVectorShuffleAsBitMask(DL, MVT::v16i8, V1, V2, Mask,
                                                   Zeroable, DAG))
    return Masked;

  // Use dedicated unpack instructions for masks that match their pattern.
  if (SDValue V =
          lowerVectorShuffleWithUNPCK(DL, MVT::v16i8, Mask, V1, V2, DAG))
    return V;

  // Check for SSSE3 which lets us lower all v16i8 shuffles much more directly
  // with PSHUFB. It is important to do this before we attempt to generate any
  // blends but after all of the single-input lowerings. If the single input
  // lowerings can find an instruction sequence that is faster than a PSHUFB, we
  // want to preserve that and we can DAG combine any longer sequences into
  // a PSHUFB in the end. But once we start blending from multiple inputs,
  // the complexity of DAG combining bad patterns back into PSHUFB is too high,
  // and there are *very* few patterns that would actually be faster than the
  // PSHUFB approach because of its ability to zero lanes.
  //
  // FIXME: The only exceptions to the above are blends which are exact
  // interleavings with direct instructions supporting them. We currently don't
  // handle those well here.
  if (Subtarget.hasSSSE3()) {
    bool V1InUse = false;
    bool V2InUse = false;

    SDValue PSHUFB = lowerVectorShuffleAsBlendOfPSHUFBs(
        DL, MVT::v16i8, V1, V2, Mask, Zeroable, DAG, V1InUse, V2InUse);

    // If both V1 and V2 are in use and we can use a direct blend or an unpack,
    // do so. This avoids using them to handle blends-with-zero which is
    // important as a single pshufb is significantly faster for that.
    if (V1InUse && V2InUse) {
      if (Subtarget.hasSSE41())
        if (SDValue Blend = lowerVectorShuffleAsBlend(
                DL, MVT::v16i8, V1, V2, Mask, Zeroable, Subtarget, DAG))
          return Blend;

      // We can use an unpack to do the blending rather than an or in some
      // cases. Even though the or may be (very minorly) more efficient, we
      // preference this lowering because there are common cases where part of
      // the complexity of the shuffles goes away when we do the final blend as
      // an unpack.
      // FIXME: It might be worth trying to detect if the unpack-feeding
      // shuffles will both be pshufb, in which case we shouldn't bother with
      // this.
      if (SDValue Unpack = lowerVectorShuffleAsPermuteAndUnpack(
              DL, MVT::v16i8, V1, V2, Mask, DAG))
        return Unpack;
    }

    return PSHUFB;
  }

  // There are special ways we can lower some single-element blends.
  if (NumV2Elements == 1)
    if (SDValue V = lowerVectorShuffleAsElementInsertion(
            DL, MVT::v16i8, V1, V2, Mask, Zeroable, Subtarget, DAG))
      return V;

  if (SDValue BitBlend =
          lowerVectorShuffleAsBitBlend(DL, MVT::v16i8, V1, V2, Mask, DAG))
    return BitBlend;

  // Check whether a compaction lowering can be done. This handles shuffles
  // which take every Nth element for some even N. See the helper function for
  // details.
  //
  // We special case these as they can be particularly efficiently handled with
  // the PACKUSB instruction on x86 and they show up in common patterns of
  // rearranging bytes to truncate wide elements.
  bool IsSingleInput = V2.isUndef();
  if (int NumEvenDrops = canLowerByDroppingEvenElements(Mask, IsSingleInput)) {
    // NumEvenDrops is the power of two stride of the elements. Another way of
    // thinking about it is that we need to drop the even elements this many
    // times to get the original input.

    // First we need to zero all the dropped bytes.
    assert(NumEvenDrops <= 3 &&
           "No support for dropping even elements more than 3 times.");
    // We use the mask type to pick which bytes are preserved based on how many
    // elements are dropped.
    MVT MaskVTs[] = { MVT::v8i16, MVT::v4i32, MVT::v2i64 };
    SDValue ByteClearMask = DAG.getBitcast(
        MVT::v16i8, DAG.getConstant(0xFF, DL, MaskVTs[NumEvenDrops - 1]));
    V1 = DAG.getNode(ISD::AND, DL, MVT::v16i8, V1, ByteClearMask);
    if (!IsSingleInput)
      V2 = DAG.getNode(ISD::AND, DL, MVT::v16i8, V2, ByteClearMask);

    // Now pack things back together.
    V1 = DAG.getBitcast(MVT::v8i16, V1);
    V2 = IsSingleInput ? V1 : DAG.getBitcast(MVT::v8i16, V2);
    SDValue Result = DAG.getNode(X86ISD::PACKUS, DL, MVT::v16i8, V1, V2);
    for (int i = 1; i < NumEvenDrops; ++i) {
      Result = DAG.getBitcast(MVT::v8i16, Result);
      Result = DAG.getNode(X86ISD::PACKUS, DL, MVT::v16i8, Result, Result);
    }

    return Result;
  }

  // Handle multi-input cases by blending single-input shuffles.
  if (NumV2Elements > 0)
    return lowerVectorShuffleAsDecomposedShuffleBlend(DL, MVT::v16i8, V1, V2,
                                                      Mask, DAG);

  // The fallback path for single-input shuffles widens this into two v8i16
  // vectors with unpacks, shuffles those, and then pulls them back together
  // with a pack.
  SDValue V = V1;

  std::array<int, 8> LoBlendMask = {{-1, -1, -1, -1, -1, -1, -1, -1}};
  std::array<int, 8> HiBlendMask = {{-1, -1, -1, -1, -1, -1, -1, -1}};
  for (int i = 0; i < 16; ++i)
    if (Mask[i] >= 0)
      (i < 8 ? LoBlendMask[i] : HiBlendMask[i % 8]) = Mask[i];

  SDValue VLoHalf, VHiHalf;
  // Check if any of the odd lanes in the v16i8 are used. If not, we can mask
  // them out and avoid using UNPCK{L,H} to extract the elements of V as
  // i16s.
  if (none_of(LoBlendMask, [](int M) { return M >= 0 && M % 2 == 1; }) &&
      none_of(HiBlendMask, [](int M) { return M >= 0 && M % 2 == 1; })) {
    // Use a mask to drop the high bytes.
    VLoHalf = DAG.getBitcast(MVT::v8i16, V);
    VLoHalf = DAG.getNode(ISD::AND, DL, MVT::v8i16, VLoHalf,
                          DAG.getConstant(0x00FF, DL, MVT::v8i16));

    // This will be a single vector shuffle instead of a blend so nuke VHiHalf.
    VHiHalf = DAG.getUNDEF(MVT::v8i16);

    // Squash the masks to point directly into VLoHalf.
    for (int &M : LoBlendMask)
      if (M >= 0)
        M /= 2;
    for (int &M : HiBlendMask)
      if (M >= 0)
        M /= 2;
  } else {
    // Otherwise just unpack the low half of V into VLoHalf and the high half into
    // VHiHalf so that we can blend them as i16s.
    SDValue Zero = getZeroVector(MVT::v16i8, Subtarget, DAG, DL);

    VLoHalf = DAG.getBitcast(
        MVT::v8i16, DAG.getNode(X86ISD::UNPCKL, DL, MVT::v16i8, V, Zero));
    VHiHalf = DAG.getBitcast(
        MVT::v8i16, DAG.getNode(X86ISD::UNPCKH, DL, MVT::v16i8, V, Zero));
  }

  SDValue LoV = DAG.getVectorShuffle(MVT::v8i16, DL, VLoHalf, VHiHalf, LoBlendMask);
  SDValue HiV = DAG.getVectorShuffle(MVT::v8i16, DL, VLoHalf, VHiHalf, HiBlendMask);

  return DAG.getNode(X86ISD::PACKUS, DL, MVT::v16i8, LoV, HiV);
}

/// \brief Dispatching routine to lower various 128-bit x86 vector shuffles.
///
/// This routine breaks down the specific type of 128-bit shuffle and
/// dispatches to the lowering routines accordingly.
static SDValue lower128BitVectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                        MVT VT, SDValue V1, SDValue V2,
                                        const APInt &Zeroable,
                                        const X86Subtarget &Subtarget,
                                        SelectionDAG &DAG) {
  switch (VT.SimpleTy) {
  case MVT::v2i64:
    return lowerV2I64VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);
  case MVT::v2f64:
    return lowerV2F64VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);
  case MVT::v4i32:
    return lowerV4I32VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);
  case MVT::v4f32:
    return lowerV4F32VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);
  case MVT::v8i16:
    return lowerV8I16VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);
  case MVT::v16i8:
    return lowerV16I8VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);

  default:
    llvm_unreachable("Unimplemented!");
  }
}

/// \brief Generic routine to split vector shuffle into half-sized shuffles.
///
/// This routine just extracts two subvectors, shuffles them independently, and
/// then concatenates them back together. This should work effectively with all
/// AVX vector shuffle types.
static SDValue splitAndLowerVectorShuffle(const SDLoc &DL, MVT VT, SDValue V1,
                                          SDValue V2, ArrayRef<int> Mask,
                                          SelectionDAG &DAG) {
  assert(VT.getSizeInBits() >= 256 &&
         "Only for 256-bit or wider vector shuffles!");
  assert(V1.getSimpleValueType() == VT && "Bad operand type!");
  assert(V2.getSimpleValueType() == VT && "Bad operand type!");

  ArrayRef<int> LoMask = Mask.slice(0, Mask.size() / 2);
  ArrayRef<int> HiMask = Mask.slice(Mask.size() / 2);

  int NumElements = VT.getVectorNumElements();
  int SplitNumElements = NumElements / 2;
  MVT ScalarVT = VT.getVectorElementType();
  MVT SplitVT = MVT::getVectorVT(ScalarVT, NumElements / 2);

  // Rather than splitting build-vectors, just build two narrower build
  // vectors. This helps shuffling with splats and zeros.
  auto SplitVector = [&](SDValue V) {
    V = peekThroughBitcasts(V);

    MVT OrigVT = V.getSimpleValueType();
    int OrigNumElements = OrigVT.getVectorNumElements();
    int OrigSplitNumElements = OrigNumElements / 2;
    MVT OrigScalarVT = OrigVT.getVectorElementType();
    MVT OrigSplitVT = MVT::getVectorVT(OrigScalarVT, OrigNumElements / 2);

    SDValue LoV, HiV;

    auto *BV = dyn_cast<BuildVectorSDNode>(V);
    if (!BV) {
      LoV = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, OrigSplitVT, V,
                        DAG.getIntPtrConstant(0, DL));
      HiV = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, OrigSplitVT, V,
                        DAG.getIntPtrConstant(OrigSplitNumElements, DL));
    } else {

      SmallVector<SDValue, 16> LoOps, HiOps;
      for (int i = 0; i < OrigSplitNumElements; ++i) {
        LoOps.push_back(BV->getOperand(i));
        HiOps.push_back(BV->getOperand(i + OrigSplitNumElements));
      }
      LoV = DAG.getBuildVector(OrigSplitVT, DL, LoOps);
      HiV = DAG.getBuildVector(OrigSplitVT, DL, HiOps);
    }
    return std::make_pair(DAG.getBitcast(SplitVT, LoV),
                          DAG.getBitcast(SplitVT, HiV));
  };

  SDValue LoV1, HiV1, LoV2, HiV2;
  std::tie(LoV1, HiV1) = SplitVector(V1);
  std::tie(LoV2, HiV2) = SplitVector(V2);

  // Now create two 4-way blends of these half-width vectors.
  auto HalfBlend = [&](ArrayRef<int> HalfMask) {
    bool UseLoV1 = false, UseHiV1 = false, UseLoV2 = false, UseHiV2 = false;
    SmallVector<int, 32> V1BlendMask((unsigned)SplitNumElements, -1);
    SmallVector<int, 32> V2BlendMask((unsigned)SplitNumElements, -1);
    SmallVector<int, 32> BlendMask((unsigned)SplitNumElements, -1);
    for (int i = 0; i < SplitNumElements; ++i) {
      int M = HalfMask[i];
      if (M >= NumElements) {
        if (M >= NumElements + SplitNumElements)
          UseHiV2 = true;
        else
          UseLoV2 = true;
        V2BlendMask[i] = M - NumElements;
        BlendMask[i] = SplitNumElements + i;
      } else if (M >= 0) {
        if (M >= SplitNumElements)
          UseHiV1 = true;
        else
          UseLoV1 = true;
        V1BlendMask[i] = M;
        BlendMask[i] = i;
      }
    }

    // Because the lowering happens after all combining takes place, we need to
    // manually combine these blend masks as much as possible so that we create
    // a minimal number of high-level vector shuffle nodes.

    // First try just blending the halves of V1 or V2.
    if (!UseLoV1 && !UseHiV1 && !UseLoV2 && !UseHiV2)
      return DAG.getUNDEF(SplitVT);
    if (!UseLoV2 && !UseHiV2)
      return DAG.getVectorShuffle(SplitVT, DL, LoV1, HiV1, V1BlendMask);
    if (!UseLoV1 && !UseHiV1)
      return DAG.getVectorShuffle(SplitVT, DL, LoV2, HiV2, V2BlendMask);

    SDValue V1Blend, V2Blend;
    if (UseLoV1 && UseHiV1) {
      V1Blend =
        DAG.getVectorShuffle(SplitVT, DL, LoV1, HiV1, V1BlendMask);
    } else {
      // We only use half of V1 so map the usage down into the final blend mask.
      V1Blend = UseLoV1 ? LoV1 : HiV1;
      for (int i = 0; i < SplitNumElements; ++i)
        if (BlendMask[i] >= 0 && BlendMask[i] < SplitNumElements)
          BlendMask[i] = V1BlendMask[i] - (UseLoV1 ? 0 : SplitNumElements);
    }
    if (UseLoV2 && UseHiV2) {
      V2Blend =
        DAG.getVectorShuffle(SplitVT, DL, LoV2, HiV2, V2BlendMask);
    } else {
      // We only use half of V2 so map the usage down into the final blend mask.
      V2Blend = UseLoV2 ? LoV2 : HiV2;
      for (int i = 0; i < SplitNumElements; ++i)
        if (BlendMask[i] >= SplitNumElements)
          BlendMask[i] = V2BlendMask[i] + (UseLoV2 ? SplitNumElements : 0);
    }
    return DAG.getVectorShuffle(SplitVT, DL, V1Blend, V2Blend, BlendMask);
  };
  SDValue Lo = HalfBlend(LoMask);
  SDValue Hi = HalfBlend(HiMask);
  return DAG.getNode(ISD::CONCAT_VECTORS, DL, VT, Lo, Hi);
}

/// \brief Either split a vector in halves or decompose the shuffles and the
/// blend.
///
/// This is provided as a good fallback for many lowerings of non-single-input
/// shuffles with more than one 128-bit lane. In those cases, we want to select
/// between splitting the shuffle into 128-bit components and stitching those
/// back together vs. extracting the single-input shuffles and blending those
/// results.
static SDValue lowerVectorShuffleAsSplitOrBlend(const SDLoc &DL, MVT VT,
                                                SDValue V1, SDValue V2,
                                                ArrayRef<int> Mask,
                                                SelectionDAG &DAG) {
  assert(!V2.isUndef() && "This routine must not be used to lower single-input "
         "shuffles as it could then recurse on itself.");
  int Size = Mask.size();

  // If this can be modeled as a broadcast of two elements followed by a blend,
  // prefer that lowering. This is especially important because broadcasts can
  // often fold with memory operands.
  auto DoBothBroadcast = [&] {
    int V1BroadcastIdx = -1, V2BroadcastIdx = -1;
    for (int M : Mask)
      if (M >= Size) {
        if (V2BroadcastIdx < 0)
          V2BroadcastIdx = M - Size;
        else if (M - Size != V2BroadcastIdx)
          return false;
      } else if (M >= 0) {
        if (V1BroadcastIdx < 0)
          V1BroadcastIdx = M;
        else if (M != V1BroadcastIdx)
          return false;
      }
    return true;
  };
  if (DoBothBroadcast())
    return lowerVectorShuffleAsDecomposedShuffleBlend(DL, VT, V1, V2, Mask,
                                                      DAG);

  // If the inputs all stem from a single 128-bit lane of each input, then we
  // split them rather than blending because the split will decompose to
  // unusually few instructions.
  int LaneCount = VT.getSizeInBits() / 128;
  int LaneSize = Size / LaneCount;
  SmallBitVector LaneInputs[2];
  LaneInputs[0].resize(LaneCount, false);
  LaneInputs[1].resize(LaneCount, false);
  for (int i = 0; i < Size; ++i)
    if (Mask[i] >= 0)
      LaneInputs[Mask[i] / Size][(Mask[i] % Size) / LaneSize] = true;
  if (LaneInputs[0].count() <= 1 && LaneInputs[1].count() <= 1)
    return splitAndLowerVectorShuffle(DL, VT, V1, V2, Mask, DAG);

  // Otherwise, just fall back to decomposed shuffles and a blend. This requires
  // that the decomposed single-input shuffles don't end up here.
  return lowerVectorShuffleAsDecomposedShuffleBlend(DL, VT, V1, V2, Mask, DAG);
}

/// \brief Lower a vector shuffle crossing multiple 128-bit lanes as
/// a permutation and blend of those lanes.
///
/// This essentially blends the out-of-lane inputs to each lane into the lane
/// from a permuted copy of the vector. This lowering strategy results in four
/// instructions in the worst case for a single-input cross lane shuffle which
/// is lower than any other fully general cross-lane shuffle strategy I'm aware
/// of. Special cases for each particular shuffle pattern should be handled
/// prior to trying this lowering.
static SDValue lowerVectorShuffleAsLanePermuteAndBlend(const SDLoc &DL, MVT VT,
                                                       SDValue V1, SDValue V2,
                                                       ArrayRef<int> Mask,
                                                       SelectionDAG &DAG,
                                                       const X86Subtarget &Subtarget) {
  // FIXME: This should probably be generalized for 512-bit vectors as well.
  assert(VT.is256BitVector() && "Only for 256-bit vector shuffles!");
  int Size = Mask.size();
  int LaneSize = Size / 2;

  // If there are only inputs from one 128-bit lane, splitting will in fact be
  // less expensive. The flags track whether the given lane contains an element
  // that crosses to another lane.
  if (!Subtarget.hasAVX2()) {
    bool LaneCrossing[2] = {false, false};
    for (int i = 0; i < Size; ++i)
      if (Mask[i] >= 0 && (Mask[i] % Size) / LaneSize != i / LaneSize)
        LaneCrossing[(Mask[i] % Size) / LaneSize] = true;
    if (!LaneCrossing[0] || !LaneCrossing[1])
      return splitAndLowerVectorShuffle(DL, VT, V1, V2, Mask, DAG);
  } else {
    bool LaneUsed[2] = {false, false};
    for (int i = 0; i < Size; ++i)
      if (Mask[i] >= 0)
        LaneUsed[(Mask[i] / LaneSize)] = true;
    if (!LaneUsed[0] || !LaneUsed[1])
      return splitAndLowerVectorShuffle(DL, VT, V1, V2, Mask, DAG);
  }

  assert(V2.isUndef() &&
         "This last part of this routine only works on single input shuffles");

  SmallVector<int, 32> FlippedBlendMask(Size);
  for (int i = 0; i < Size; ++i)
    FlippedBlendMask[i] =
        Mask[i] < 0 ? -1 : (((Mask[i] % Size) / LaneSize == i / LaneSize)
                                ? Mask[i]
                                : Mask[i] % LaneSize +
                                      (i / LaneSize) * LaneSize + Size);

  // Flip the vector, and blend the results which should now be in-lane.
  MVT PVT = VT.isFloatingPoint() ? MVT::v4f64 : MVT::v4i64;
  SDValue Flipped = DAG.getBitcast(PVT, V1);
  Flipped = DAG.getVectorShuffle(PVT, DL, Flipped, DAG.getUNDEF(PVT),
                                 { 2, 3, 0, 1 });
  Flipped = DAG.getBitcast(VT, Flipped);
  return DAG.getVectorShuffle(VT, DL, V1, Flipped, FlippedBlendMask);
}

/// \brief Handle lowering 2-lane 128-bit shuffles.
static SDValue lowerV2X128VectorShuffle(const SDLoc &DL, MVT VT, SDValue V1,
                                        SDValue V2, ArrayRef<int> Mask,
                                        const APInt &Zeroable,
                                        const X86Subtarget &Subtarget,
                                        SelectionDAG &DAG) {
  // With AVX2, use VPERMQ/VPERMPD for unary shuffles to allow memory folding.
  if (Subtarget.hasAVX2() && V2.isUndef())
    return SDValue();

  SmallVector<int, 4> WidenedMask;
  if (!canWidenShuffleElements(Mask, WidenedMask))
    return SDValue();

  // TODO: If minimizing size and one of the inputs is a zero vector and the
  // the zero vector has only one use, we could use a VPERM2X128 to save the
  // instruction bytes needed to explicitly generate the zero vector.

  // Blends are faster and handle all the non-lane-crossing cases.
  if (SDValue Blend = lowerVectorShuffleAsBlend(DL, VT, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Blend;

  bool IsLowZero = (Zeroable & 0x3) == 0x3;
  bool IsHighZero = (Zeroable & 0xc) == 0xc;

  // If either input operand is a zero vector, use VPERM2X128 because its mask
  // allows us to replace the zero input with an implicit zero.
  if (!IsLowZero && !IsHighZero) {
    // Check for patterns which can be matched with a single insert of a 128-bit
    // subvector.
    bool OnlyUsesV1 = isShuffleEquivalent(V1, V2, Mask, {0, 1, 0, 1});
    if (OnlyUsesV1 || isShuffleEquivalent(V1, V2, Mask, {0, 1, 4, 5})) {

      // With AVX1, use vperm2f128 (below) to allow load folding. Otherwise,
      // this will likely become vinsertf128 which can't fold a 256-bit memop.
      if (!isa<LoadSDNode>(peekThroughBitcasts(V1))) {
        MVT SubVT = MVT::getVectorVT(VT.getVectorElementType(),
                                     VT.getVectorNumElements() / 2);
        SDValue LoV = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, SubVT, V1,
                                  DAG.getIntPtrConstant(0, DL));
        SDValue HiV = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, SubVT,
                                  OnlyUsesV1 ? V1 : V2,
                                  DAG.getIntPtrConstant(0, DL));
        return DAG.getNode(ISD::CONCAT_VECTORS, DL, VT, LoV, HiV);
      }
    }

    // Try to use SHUF128 if possible.
    if (Subtarget.hasVLX()) {
      if (WidenedMask[0] < 2 && WidenedMask[1] >= 2) {
        unsigned PermMask = ((WidenedMask[0] % 2) << 0) |
                            ((WidenedMask[1] % 2) << 1);
      return DAG.getNode(X86ISD::SHUF128, DL, VT, V1, V2,
                         DAG.getConstant(PermMask, DL, MVT::i8));
      }
    }
  }

  // Otherwise form a 128-bit permutation. After accounting for undefs,
  // convert the 64-bit shuffle mask selection values into 128-bit
  // selection bits by dividing the indexes by 2 and shifting into positions
  // defined by a vperm2*128 instruction's immediate control byte.

  // The immediate permute control byte looks like this:
  //    [1:0] - select 128 bits from sources for low half of destination
  //    [2]   - ignore
  //    [3]   - zero low half of destination
  //    [5:4] - select 128 bits from sources for high half of destination
  //    [6]   - ignore
  //    [7]   - zero high half of destination

  assert(WidenedMask[0] >= 0 && WidenedMask[1] >= 0 && "Undef half?");

  unsigned PermMask = 0;
  PermMask |= IsLowZero  ? 0x08 : (WidenedMask[0] << 0);
  PermMask |= IsHighZero ? 0x80 : (WidenedMask[1] << 4);

  // Check the immediate mask and replace unused sources with undef.
  if ((PermMask & 0x0a) != 0x00 && (PermMask & 0xa0) != 0x00)
    V1 = DAG.getUNDEF(VT);
  if ((PermMask & 0x0a) != 0x02 && (PermMask & 0xa0) != 0x20)
    V2 = DAG.getUNDEF(VT);

  return DAG.getNode(X86ISD::VPERM2X128, DL, VT, V1, V2,
                     DAG.getConstant(PermMask, DL, MVT::i8));
}

/// \brief Lower a vector shuffle by first fixing the 128-bit lanes and then
/// shuffling each lane.
///
/// This will only succeed when the result of fixing the 128-bit lanes results
/// in a single-input non-lane-crossing shuffle with a repeating shuffle mask in
/// each 128-bit lanes. This handles many cases where we can quickly blend away
/// the lane crosses early and then use simpler shuffles within each lane.
///
/// FIXME: It might be worthwhile at some point to support this without
/// requiring the 128-bit lane-relative shuffles to be repeating, but currently
/// in x86 only floating point has interesting non-repeating shuffles, and even
/// those are still *marginally* more expensive.
static SDValue lowerVectorShuffleByMerging128BitLanes(
    const SDLoc &DL, MVT VT, SDValue V1, SDValue V2, ArrayRef<int> Mask,
    const X86Subtarget &Subtarget, SelectionDAG &DAG) {
  assert(!V2.isUndef() && "This is only useful with multiple inputs.");

  int Size = Mask.size();
  int LaneSize = 128 / VT.getScalarSizeInBits();
  int NumLanes = Size / LaneSize;
  assert(NumLanes > 1 && "Only handles 256-bit and wider shuffles.");

  // See if we can build a hypothetical 128-bit lane-fixing shuffle mask. Also
  // check whether the in-128-bit lane shuffles share a repeating pattern.
  SmallVector<int, 4> Lanes((unsigned)NumLanes, -1);
  SmallVector<int, 4> InLaneMask((unsigned)LaneSize, -1);
  for (int i = 0; i < Size; ++i) {
    if (Mask[i] < 0)
      continue;

    int j = i / LaneSize;

    if (Lanes[j] < 0) {
      // First entry we've seen for this lane.
      Lanes[j] = Mask[i] / LaneSize;
    } else if (Lanes[j] != Mask[i] / LaneSize) {
      // This doesn't match the lane selected previously!
      return SDValue();
    }

    // Check that within each lane we have a consistent shuffle mask.
    int k = i % LaneSize;
    if (InLaneMask[k] < 0) {
      InLaneMask[k] = Mask[i] % LaneSize;
    } else if (InLaneMask[k] != Mask[i] % LaneSize) {
      // This doesn't fit a repeating in-lane mask.
      return SDValue();
    }
  }

  // First shuffle the lanes into place.
  MVT LaneVT = MVT::getVectorVT(VT.isFloatingPoint() ? MVT::f64 : MVT::i64,
                                VT.getSizeInBits() / 64);
  SmallVector<int, 8> LaneMask((unsigned)NumLanes * 2, -1);
  for (int i = 0; i < NumLanes; ++i)
    if (Lanes[i] >= 0) {
      LaneMask[2 * i + 0] = 2*Lanes[i] + 0;
      LaneMask[2 * i + 1] = 2*Lanes[i] + 1;
    }

  V1 = DAG.getBitcast(LaneVT, V1);
  V2 = DAG.getBitcast(LaneVT, V2);
  SDValue LaneShuffle = DAG.getVectorShuffle(LaneVT, DL, V1, V2, LaneMask);

  // Cast it back to the type we actually want.
  LaneShuffle = DAG.getBitcast(VT, LaneShuffle);

  // Now do a simple shuffle that isn't lane crossing.
  SmallVector<int, 8> NewMask((unsigned)Size, -1);
  for (int i = 0; i < Size; ++i)
    if (Mask[i] >= 0)
      NewMask[i] = (i / LaneSize) * LaneSize + Mask[i] % LaneSize;
  assert(!is128BitLaneCrossingShuffleMask(VT, NewMask) &&
         "Must not introduce lane crosses at this point!");

  return DAG.getVectorShuffle(VT, DL, LaneShuffle, DAG.getUNDEF(VT), NewMask);
}

/// Lower shuffles where an entire half of a 256 or 512-bit vector is UNDEF.
/// This allows for fast cases such as subvector extraction/insertion
/// or shuffling smaller vector types which can lower more efficiently.
static SDValue lowerVectorShuffleWithUndefHalf(const SDLoc &DL, MVT VT,
                                               SDValue V1, SDValue V2,
                                               ArrayRef<int> Mask,
                                               const X86Subtarget &Subtarget,
                                               SelectionDAG &DAG) {
  assert((VT.is256BitVector() || VT.is512BitVector()) &&
         "Expected 256-bit or 512-bit vector");

  unsigned NumElts = VT.getVectorNumElements();
  unsigned HalfNumElts = NumElts / 2;
  MVT HalfVT = MVT::getVectorVT(VT.getVectorElementType(), HalfNumElts);

  bool UndefLower = isUndefInRange(Mask, 0, HalfNumElts);
  bool UndefUpper = isUndefInRange(Mask, HalfNumElts, HalfNumElts);
  if (!UndefLower && !UndefUpper)
    return SDValue();

  // Upper half is undef and lower half is whole upper subvector.
  // e.g. vector_shuffle <4, 5, 6, 7, u, u, u, u> or <2, 3, u, u>
  if (UndefUpper &&
      isSequentialOrUndefInRange(Mask, 0, HalfNumElts, HalfNumElts)) {
    SDValue Hi = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, HalfVT, V1,
                             DAG.getIntPtrConstant(HalfNumElts, DL));
    return DAG.getNode(ISD::INSERT_SUBVECTOR, DL, VT, DAG.getUNDEF(VT), Hi,
                       DAG.getIntPtrConstant(0, DL));
  }

  // Lower half is undef and upper half is whole lower subvector.
  // e.g. vector_shuffle <u, u, u, u, 0, 1, 2, 3> or <u, u, 0, 1>
  if (UndefLower &&
      isSequentialOrUndefInRange(Mask, HalfNumElts, HalfNumElts, 0)) {
    SDValue Hi = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, HalfVT, V1,
                             DAG.getIntPtrConstant(0, DL));
    return DAG.getNode(ISD::INSERT_SUBVECTOR, DL, VT, DAG.getUNDEF(VT), Hi,
                       DAG.getIntPtrConstant(HalfNumElts, DL));
  }

  // If the shuffle only uses two of the four halves of the input operands,
  // then extract them and perform the 'half' shuffle at half width.
  // e.g. vector_shuffle <X, X, X, X, u, u, u, u> or <X, X, u, u>
  int HalfIdx1 = -1, HalfIdx2 = -1;
  SmallVector<int, 8> HalfMask(HalfNumElts);
  unsigned Offset = UndefLower ? HalfNumElts : 0;
  for (unsigned i = 0; i != HalfNumElts; ++i) {
    int M = Mask[i + Offset];
    if (M < 0) {
      HalfMask[i] = M;
      continue;
    }

    // Determine which of the 4 half vectors this element is from.
    // i.e. 0 = Lower V1, 1 = Upper V1, 2 = Lower V2, 3 = Upper V2.
    int HalfIdx = M / HalfNumElts;

    // Determine the element index into its half vector source.
    int HalfElt = M % HalfNumElts;

    // We can shuffle with up to 2 half vectors, set the new 'half'
    // shuffle mask accordingly.
    if (HalfIdx1 < 0 || HalfIdx1 == HalfIdx) {
      HalfMask[i] = HalfElt;
      HalfIdx1 = HalfIdx;
      continue;
    }
    if (HalfIdx2 < 0 || HalfIdx2 == HalfIdx) {
      HalfMask[i] = HalfElt + HalfNumElts;
      HalfIdx2 = HalfIdx;
      continue;
    }

    // Too many half vectors referenced.
    return SDValue();
  }
  assert(HalfMask.size() == HalfNumElts && "Unexpected shuffle mask length");

  // Only shuffle the halves of the inputs when useful.
  int NumLowerHalves =
      (HalfIdx1 == 0 || HalfIdx1 == 2) + (HalfIdx2 == 0 || HalfIdx2 == 2);
  int NumUpperHalves =
      (HalfIdx1 == 1 || HalfIdx1 == 3) + (HalfIdx2 == 1 || HalfIdx2 == 3);

  // uuuuXXXX - don't extract uppers just to insert again.
  if (UndefLower && NumUpperHalves != 0)
    return SDValue();

  // XXXXuuuu - don't extract both uppers, instead shuffle and then extract.
  if (UndefUpper && NumUpperHalves == 2)
    return SDValue();

  // AVX2 - XXXXuuuu - always extract lowers.
  if (Subtarget.hasAVX2() && !(UndefUpper && NumUpperHalves == 0)) {
    // AVX2 supports efficient immediate 64-bit element cross-lane shuffles.
    if (VT == MVT::v4f64 || VT == MVT::v4i64)
      return SDValue();
    // AVX2 supports variable 32-bit element cross-lane shuffles.
    if (VT == MVT::v8f32 || VT == MVT::v8i32) {
      // XXXXuuuu - don't extract lowers and uppers.
      if (UndefUpper && NumLowerHalves != 0 && NumUpperHalves != 0)
        return SDValue();
    }
  }

  // AVX512 - XXXXuuuu - always extract lowers.
  if (VT.is512BitVector() && !(UndefUpper && NumUpperHalves == 0))
    return SDValue();

  auto GetHalfVector = [&](int HalfIdx) {
    if (HalfIdx < 0)
      return DAG.getUNDEF(HalfVT);
    SDValue V = (HalfIdx < 2 ? V1 : V2);
    HalfIdx = (HalfIdx % 2) * HalfNumElts;
    return DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, HalfVT, V,
                       DAG.getIntPtrConstant(HalfIdx, DL));
  };

  SDValue Half1 = GetHalfVector(HalfIdx1);
  SDValue Half2 = GetHalfVector(HalfIdx2);
  SDValue V = DAG.getVectorShuffle(HalfVT, DL, Half1, Half2, HalfMask);
  return DAG.getNode(ISD::INSERT_SUBVECTOR, DL, VT, DAG.getUNDEF(VT), V,
                     DAG.getIntPtrConstant(Offset, DL));
}

/// \brief Test whether the specified input (0 or 1) is in-place blended by the
/// given mask.
///
/// This returns true if the elements from a particular input are already in the
/// slot required by the given mask and require no permutation.
static bool isShuffleMaskInputInPlace(int Input, ArrayRef<int> Mask) {
  assert((Input == 0 || Input == 1) && "Only two inputs to shuffles.");
  int Size = Mask.size();
  for (int i = 0; i < Size; ++i)
    if (Mask[i] >= 0 && Mask[i] / Size == Input && Mask[i] % Size != i)
      return false;

  return true;
}

/// Handle case where shuffle sources are coming from the same 128-bit lane and
/// every lane can be represented as the same repeating mask - allowing us to
/// shuffle the sources with the repeating shuffle and then permute the result
/// to the destination lanes.
static SDValue lowerShuffleAsRepeatedMaskAndLanePermute(
    const SDLoc &DL, MVT VT, SDValue V1, SDValue V2, ArrayRef<int> Mask,
    const X86Subtarget &Subtarget, SelectionDAG &DAG) {
  int NumElts = VT.getVectorNumElements();
  int NumLanes = VT.getSizeInBits() / 128;
  int NumLaneElts = NumElts / NumLanes;

  // On AVX2 we may be able to just shuffle the lowest elements and then
  // broadcast the result.
  if (Subtarget.hasAVX2()) {
    for (unsigned BroadcastSize : {16, 32, 64}) {
      if (BroadcastSize <= VT.getScalarSizeInBits())
        continue;
      int NumBroadcastElts = BroadcastSize / VT.getScalarSizeInBits();

      // Attempt to match a repeating pattern every NumBroadcastElts,
      // accounting for UNDEFs but only references the lowest 128-bit
      // lane of the inputs.
      auto FindRepeatingBroadcastMask = [&](SmallVectorImpl<int> &RepeatMask) {
        for (int i = 0; i != NumElts; i += NumBroadcastElts)
          for (int j = 0; j != NumBroadcastElts; ++j) {
            int M = Mask[i + j];
            if (M < 0)
              continue;
            int &R = RepeatMask[j];
            if (0 != ((M % NumElts) / NumLaneElts))
              return false;
            if (0 <= R && R != M)
              return false;
            R = M;
          }
        return true;
      };

      SmallVector<int, 8> RepeatMask((unsigned)NumElts, -1);
      if (!FindRepeatingBroadcastMask(RepeatMask))
        continue;

      // Shuffle the (lowest) repeated elements in place for broadcast.
      SDValue RepeatShuf = DAG.getVectorShuffle(VT, DL, V1, V2, RepeatMask);

      // Shuffle the actual broadcast.
      SmallVector<int, 8> BroadcastMask((unsigned)NumElts, -1);
      for (int i = 0; i != NumElts; i += NumBroadcastElts)
        for (int j = 0; j != NumBroadcastElts; ++j)
          BroadcastMask[i + j] = j;
      return DAG.getVectorShuffle(VT, DL, RepeatShuf, DAG.getUNDEF(VT),
                                  BroadcastMask);
    }
  }

  // Bail if the shuffle mask doesn't cross 128-bit lanes.
  if (!is128BitLaneCrossingShuffleMask(VT, Mask))
    return SDValue();

  // Bail if we already have a repeated lane shuffle mask.
  SmallVector<int, 8> RepeatedShuffleMask;
  if (is128BitLaneRepeatedShuffleMask(VT, Mask, RepeatedShuffleMask))
    return SDValue();

  // On AVX2 targets we can permute 256-bit vectors as 64-bit sub-lanes
  // (with PERMQ/PERMPD), otherwise we can only permute whole 128-bit lanes.
  int SubLaneScale = Subtarget.hasAVX2() && VT.is256BitVector() ? 2 : 1;
  int NumSubLanes = NumLanes * SubLaneScale;
  int NumSubLaneElts = NumLaneElts / SubLaneScale;

  // Check that all the sources are coming from the same lane and see if we can
  // form a repeating shuffle mask (local to each sub-lane). At the same time,
  // determine the source sub-lane for each destination sub-lane.
  int TopSrcSubLane = -1;
  SmallVector<int, 8> Dst2SrcSubLanes((unsigned)NumSubLanes, -1);
  SmallVector<int, 8> RepeatedSubLaneMasks[2] = {
      SmallVector<int, 8>((unsigned)NumSubLaneElts, SM_SentinelUndef),
      SmallVector<int, 8>((unsigned)NumSubLaneElts, SM_SentinelUndef)};

  for (int DstSubLane = 0; DstSubLane != NumSubLanes; ++DstSubLane) {
    // Extract the sub-lane mask, check that it all comes from the same lane
    // and normalize the mask entries to come from the first lane.
    int SrcLane = -1;
    SmallVector<int, 8> SubLaneMask((unsigned)NumSubLaneElts, -1);
    for (int Elt = 0; Elt != NumSubLaneElts; ++Elt) {
      int M = Mask[(DstSubLane * NumSubLaneElts) + Elt];
      if (M < 0)
        continue;
      int Lane = (M % NumElts) / NumLaneElts;
      if ((0 <= SrcLane) && (SrcLane != Lane))
        return SDValue();
      SrcLane = Lane;
      int LocalM = (M % NumLaneElts) + (M < NumElts ? 0 : NumElts);
      SubLaneMask[Elt] = LocalM;
    }

    // Whole sub-lane is UNDEF.
    if (SrcLane < 0)
      continue;

    // Attempt to match against the candidate repeated sub-lane masks.
    for (int SubLane = 0; SubLane != SubLaneScale; ++SubLane) {
      auto MatchMasks = [NumSubLaneElts](ArrayRef<int> M1, ArrayRef<int> M2) {
        for (int i = 0; i != NumSubLaneElts; ++i) {
          if (M1[i] < 0 || M2[i] < 0)
            continue;
          if (M1[i] != M2[i])
            return false;
        }
        return true;
      };

      auto &RepeatedSubLaneMask = RepeatedSubLaneMasks[SubLane];
      if (!MatchMasks(SubLaneMask, RepeatedSubLaneMask))
        continue;

      // Merge the sub-lane mask into the matching repeated sub-lane mask.
      for (int i = 0; i != NumSubLaneElts; ++i) {
        int M = SubLaneMask[i];
        if (M < 0)
          continue;
        assert((RepeatedSubLaneMask[i] < 0 || RepeatedSubLaneMask[i] == M) &&
               "Unexpected mask element");
        RepeatedSubLaneMask[i] = M;
      }

      // Track the top most source sub-lane - by setting the remaining to UNDEF
      // we can greatly simplify shuffle matching.
      int SrcSubLane = (SrcLane * SubLaneScale) + SubLane;
      TopSrcSubLane = std::max(TopSrcSubLane, SrcSubLane);
      Dst2SrcSubLanes[DstSubLane] = SrcSubLane;
      break;
    }

    // Bail if we failed to find a matching repeated sub-lane mask.
    if (Dst2SrcSubLanes[DstSubLane] < 0)
      return SDValue();
  }
  assert(0 <= TopSrcSubLane && TopSrcSubLane < NumSubLanes &&
         "Unexpected source lane");

  // Create a repeating shuffle mask for the entire vector.
  SmallVector<int, 8> RepeatedMask((unsigned)NumElts, -1);
  for (int SubLane = 0; SubLane <= TopSrcSubLane; ++SubLane) {
    int Lane = SubLane / SubLaneScale;
    auto &RepeatedSubLaneMask = RepeatedSubLaneMasks[SubLane % SubLaneScale];
    for (int Elt = 0; Elt != NumSubLaneElts; ++Elt) {
      int M = RepeatedSubLaneMask[Elt];
      if (M < 0)
        continue;
      int Idx = (SubLane * NumSubLaneElts) + Elt;
      RepeatedMask[Idx] = M + (Lane * NumLaneElts);
    }
  }
  SDValue RepeatedShuffle = DAG.getVectorShuffle(VT, DL, V1, V2, RepeatedMask);

  // Shuffle each source sub-lane to its destination.
  SmallVector<int, 8> SubLaneMask((unsigned)NumElts, -1);
  for (int i = 0; i != NumElts; i += NumSubLaneElts) {
    int SrcSubLane = Dst2SrcSubLanes[i / NumSubLaneElts];
    if (SrcSubLane < 0)
      continue;
    for (int j = 0; j != NumSubLaneElts; ++j)
      SubLaneMask[i + j] = j + (SrcSubLane * NumSubLaneElts);
  }

  return DAG.getVectorShuffle(VT, DL, RepeatedShuffle, DAG.getUNDEF(VT),
                              SubLaneMask);
}

static bool matchVectorShuffleWithSHUFPD(MVT VT, SDValue &V1, SDValue &V2,
                                         unsigned &ShuffleImm,
                                         ArrayRef<int> Mask) {
  int NumElts = VT.getVectorNumElements();
  assert(VT.getScalarSizeInBits() == 64 &&
         (NumElts == 2 || NumElts == 4 || NumElts == 8) &&
         "Unexpected data type for VSHUFPD");

  // Mask for V8F64: 0/1,  8/9,  2/3,  10/11, 4/5, ..
  // Mask for V4F64; 0/1,  4/5,  2/3,  6/7..
  ShuffleImm = 0;
  bool ShufpdMask = true;
  bool CommutableMask = true;
  for (int i = 0; i < NumElts; ++i) {
    if (Mask[i] == SM_SentinelUndef)
      continue;
    if (Mask[i] < 0)
      return false;
    int Val = (i & 6) + NumElts * (i & 1);
    int CommutVal = (i & 0xe) + NumElts * ((i & 1) ^ 1);
    if (Mask[i] < Val || Mask[i] > Val + 1)
      ShufpdMask = false;
    if (Mask[i] < CommutVal || Mask[i] > CommutVal + 1)
      CommutableMask = false;
    ShuffleImm |= (Mask[i] % 2) << i;
  }

  if (ShufpdMask)
    return true;
  if (CommutableMask) {
    std::swap(V1, V2);
    return true;
  }

  return false;
}

static SDValue lowerVectorShuffleWithSHUFPD(const SDLoc &DL, MVT VT,
                                            ArrayRef<int> Mask, SDValue V1,
                                            SDValue V2, SelectionDAG &DAG) {
  assert((VT == MVT::v2f64 || VT == MVT::v4f64 || VT == MVT::v8f64)&&
         "Unexpected data type for VSHUFPD");

  unsigned Immediate = 0;
  if (!matchVectorShuffleWithSHUFPD(VT, V1, V2, Immediate, Mask))
    return SDValue();

  return DAG.getNode(X86ISD::SHUFP, DL, VT, V1, V2,
                     DAG.getConstant(Immediate, DL, MVT::i8));
}

static SDValue lowerVectorShuffleWithPERMV(const SDLoc &DL, MVT VT,
                                           ArrayRef<int> Mask, SDValue V1,
                                           SDValue V2, SelectionDAG &DAG) {
  MVT MaskEltVT = MVT::getIntegerVT(VT.getScalarSizeInBits());
  MVT MaskVecVT = MVT::getVectorVT(MaskEltVT, VT.getVectorNumElements());

  SDValue MaskNode = getConstVector(Mask, MaskVecVT, DAG, DL, true);
  if (V2.isUndef())
    return DAG.getNode(X86ISD::VPERMV, DL, VT, MaskNode, V1);

  return DAG.getNode(X86ISD::VPERMV3, DL, VT, V1, MaskNode, V2);
}

/// \brief Handle lowering of 4-lane 64-bit floating point shuffles.
///
/// Also ends up handling lowering of 4-lane 64-bit integer shuffles when AVX2
/// isn't available.
static SDValue lowerV4F64VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                       const APInt &Zeroable,
                                       SDValue V1, SDValue V2,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v4f64 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v4f64 && "Bad operand type!");
  assert(Mask.size() == 4 && "Unexpected mask size for v4 shuffle!");

  if (SDValue V = lowerV2X128VectorShuffle(DL, MVT::v4f64, V1, V2, Mask,
                                           Zeroable, Subtarget, DAG))
    return V;

  if (V2.isUndef()) {
    // Check for being able to broadcast a single element.
    if (SDValue Broadcast = lowerVectorShuffleAsBroadcast(
            DL, MVT::v4f64, V1, V2, Mask, Subtarget, DAG))
      return Broadcast;

    // Use low duplicate instructions for masks that match their pattern.
    if (isShuffleEquivalent(V1, V2, Mask, {0, 0, 2, 2}))
      return DAG.getNode(X86ISD::MOVDDUP, DL, MVT::v4f64, V1);

    if (!is128BitLaneCrossingShuffleMask(MVT::v4f64, Mask)) {
      // Non-half-crossing single input shuffles can be lowered with an
      // interleaved permutation.
      unsigned VPERMILPMask = (Mask[0] == 1) | ((Mask[1] == 1) << 1) |
                              ((Mask[2] == 3) << 2) | ((Mask[3] == 3) << 3);
      return DAG.getNode(X86ISD::VPERMILPI, DL, MVT::v4f64, V1,
                         DAG.getConstant(VPERMILPMask, DL, MVT::i8));
    }

    // With AVX2 we have direct support for this permutation.
    if (Subtarget.hasAVX2())
      return DAG.getNode(X86ISD::VPERMI, DL, MVT::v4f64, V1,
                         getV4X86ShuffleImm8ForMask(Mask, DL, DAG));

    // Try to create an in-lane repeating shuffle mask and then shuffle the
    // the results into the target lanes.
    if (SDValue V = lowerShuffleAsRepeatedMaskAndLanePermute(
            DL, MVT::v4f64, V1, V2, Mask, Subtarget, DAG))
      return V;

    // Otherwise, fall back.
    return lowerVectorShuffleAsLanePermuteAndBlend(DL, MVT::v4f64, V1, V2, Mask,
                                                   DAG, Subtarget);
  }

  // Use dedicated unpack instructions for masks that match their pattern.
  if (SDValue V =
          lowerVectorShuffleWithUNPCK(DL, MVT::v4f64, Mask, V1, V2, DAG))
    return V;

  if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v4f64, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Blend;

  // Check if the blend happens to exactly fit that of SHUFPD.
  if (SDValue Op =
      lowerVectorShuffleWithSHUFPD(DL, MVT::v4f64, Mask, V1, V2, DAG))
    return Op;

  // Try to create an in-lane repeating shuffle mask and then shuffle the
  // the results into the target lanes.
  if (SDValue V = lowerShuffleAsRepeatedMaskAndLanePermute(
          DL, MVT::v4f64, V1, V2, Mask, Subtarget, DAG))
    return V;

  // Try to simplify this by merging 128-bit lanes to enable a lane-based
  // shuffle. However, if we have AVX2 and either inputs are already in place,
  // we will be able to shuffle even across lanes the other input in a single
  // instruction so skip this pattern.
  if (!(Subtarget.hasAVX2() && (isShuffleMaskInputInPlace(0, Mask) ||
                                isShuffleMaskInputInPlace(1, Mask))))
    if (SDValue Result = lowerVectorShuffleByMerging128BitLanes(
            DL, MVT::v4f64, V1, V2, Mask, Subtarget, DAG))
      return Result;
  // If we have VLX support, we can use VEXPAND.
  if (Subtarget.hasVLX())
    if (SDValue V = lowerVectorShuffleToEXPAND(DL, MVT::v4f64, Zeroable, Mask,
                                               V1, V2, DAG, Subtarget))
      return V;

  // If we have AVX2 then we always want to lower with a blend because an v4 we
  // can fully permute the elements.
  if (Subtarget.hasAVX2())
    return lowerVectorShuffleAsDecomposedShuffleBlend(DL, MVT::v4f64, V1, V2,
                                                      Mask, DAG);

  // Otherwise fall back on generic lowering.
  return lowerVectorShuffleAsSplitOrBlend(DL, MVT::v4f64, V1, V2, Mask, DAG);
}

/// \brief Handle lowering of 4-lane 64-bit integer shuffles.
///
/// This routine is only called when we have AVX2 and thus a reasonable
/// instruction set for v4i64 shuffling..
static SDValue lowerV4I64VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                       const APInt &Zeroable,
                                       SDValue V1, SDValue V2,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v4i64 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v4i64 && "Bad operand type!");
  assert(Mask.size() == 4 && "Unexpected mask size for v4 shuffle!");
  assert(Subtarget.hasAVX2() && "We can only lower v4i64 with AVX2!");

  if (SDValue V = lowerV2X128VectorShuffle(DL, MVT::v4i64, V1, V2, Mask,
                                           Zeroable, Subtarget, DAG))
    return V;

  if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v4i64, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Blend;

  // Check for being able to broadcast a single element.
  if (SDValue Broadcast = lowerVectorShuffleAsBroadcast(DL, MVT::v4i64, V1, V2,
                                                        Mask, Subtarget, DAG))
    return Broadcast;

  if (V2.isUndef()) {
    // When the shuffle is mirrored between the 128-bit lanes of the unit, we
    // can use lower latency instructions that will operate on both lanes.
    SmallVector<int, 2> RepeatedMask;
    if (is128BitLaneRepeatedShuffleMask(MVT::v4i64, Mask, RepeatedMask)) {
      SmallVector<int, 4> PSHUFDMask;
      scaleShuffleMask<int>(2, RepeatedMask, PSHUFDMask);
      return DAG.getBitcast(
          MVT::v4i64,
          DAG.getNode(X86ISD::PSHUFD, DL, MVT::v8i32,
                      DAG.getBitcast(MVT::v8i32, V1),
                      getV4X86ShuffleImm8ForMask(PSHUFDMask, DL, DAG)));
    }

    // AVX2 provides a direct instruction for permuting a single input across
    // lanes.
    return DAG.getNode(X86ISD::VPERMI, DL, MVT::v4i64, V1,
                       getV4X86ShuffleImm8ForMask(Mask, DL, DAG));
  }

  // Try to use shift instructions.
  if (SDValue Shift = lowerVectorShuffleAsShift(DL, MVT::v4i64, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Shift;

  // If we have VLX support, we can use VALIGN or VEXPAND.
  if (Subtarget.hasVLX()) {
    if (SDValue Rotate = lowerVectorShuffleAsRotate(DL, MVT::v4i64, V1, V2,
                                                    Mask, Subtarget, DAG))
      return Rotate;

    if (SDValue V = lowerVectorShuffleToEXPAND(DL, MVT::v4i64, Zeroable, Mask,
                                               V1, V2, DAG, Subtarget))
      return V;
  }

  // Try to use PALIGNR.
  if (SDValue Rotate = lowerVectorShuffleAsByteRotate(DL, MVT::v4i64, V1, V2,
                                                      Mask, Subtarget, DAG))
    return Rotate;

  // Use dedicated unpack instructions for masks that match their pattern.
  if (SDValue V =
          lowerVectorShuffleWithUNPCK(DL, MVT::v4i64, Mask, V1, V2, DAG))
    return V;

  // Try to simplify this by merging 128-bit lanes to enable a lane-based
  // shuffle. However, if we have AVX2 and either inputs are already in place,
  // we will be able to shuffle even across lanes the other input in a single
  // instruction so skip this pattern.
  if (!isShuffleMaskInputInPlace(0, Mask) &&
      !isShuffleMaskInputInPlace(1, Mask))
    if (SDValue Result = lowerVectorShuffleByMerging128BitLanes(
            DL, MVT::v4i64, V1, V2, Mask, Subtarget, DAG))
      return Result;

  // Otherwise fall back on generic blend lowering.
  return lowerVectorShuffleAsDecomposedShuffleBlend(DL, MVT::v4i64, V1, V2,
                                                    Mask, DAG);
}

/// \brief Handle lowering of 8-lane 32-bit floating point shuffles.
///
/// Also ends up handling lowering of 8-lane 32-bit integer shuffles when AVX2
/// isn't available.
static SDValue lowerV8F32VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                       const APInt &Zeroable,
                                       SDValue V1, SDValue V2,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v8f32 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v8f32 && "Bad operand type!");
  assert(Mask.size() == 8 && "Unexpected mask size for v8 shuffle!");

  if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v8f32, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Blend;

  // Check for being able to broadcast a single element.
  if (SDValue Broadcast = lowerVectorShuffleAsBroadcast(DL, MVT::v8f32, V1, V2,
                                                        Mask, Subtarget, DAG))
    return Broadcast;

  // If the shuffle mask is repeated in each 128-bit lane, we have many more
  // options to efficiently lower the shuffle.
  SmallVector<int, 4> RepeatedMask;
  if (is128BitLaneRepeatedShuffleMask(MVT::v8f32, Mask, RepeatedMask)) {
    assert(RepeatedMask.size() == 4 &&
           "Repeated masks must be half the mask width!");

    // Use even/odd duplicate instructions for masks that match their pattern.
    if (isShuffleEquivalent(V1, V2, RepeatedMask, {0, 0, 2, 2}))
      return DAG.getNode(X86ISD::MOVSLDUP, DL, MVT::v8f32, V1);
    if (isShuffleEquivalent(V1, V2, RepeatedMask, {1, 1, 3, 3}))
      return DAG.getNode(X86ISD::MOVSHDUP, DL, MVT::v8f32, V1);

    if (V2.isUndef())
      return DAG.getNode(X86ISD::VPERMILPI, DL, MVT::v8f32, V1,
                         getV4X86ShuffleImm8ForMask(RepeatedMask, DL, DAG));

    // Use dedicated unpack instructions for masks that match their pattern.
    if (SDValue V =
            lowerVectorShuffleWithUNPCK(DL, MVT::v8f32, Mask, V1, V2, DAG))
      return V;

    // Otherwise, fall back to a SHUFPS sequence. Here it is important that we
    // have already handled any direct blends.
    return lowerVectorShuffleWithSHUFPS(DL, MVT::v8f32, RepeatedMask, V1, V2, DAG);
  }

  // Try to create an in-lane repeating shuffle mask and then shuffle the
  // the results into the target lanes.
  if (SDValue V = lowerShuffleAsRepeatedMaskAndLanePermute(
          DL, MVT::v8f32, V1, V2, Mask, Subtarget, DAG))
    return V;

  // If we have a single input shuffle with different shuffle patterns in the
  // two 128-bit lanes use the variable mask to VPERMILPS.
  if (V2.isUndef()) {
    SDValue VPermMask = getConstVector(Mask, MVT::v8i32, DAG, DL, true);
    if (!is128BitLaneCrossingShuffleMask(MVT::v8f32, Mask))
      return DAG.getNode(X86ISD::VPERMILPV, DL, MVT::v8f32, V1, VPermMask);

    if (Subtarget.hasAVX2())
      return DAG.getNode(X86ISD::VPERMV, DL, MVT::v8f32, VPermMask, V1);

    // Otherwise, fall back.
    return lowerVectorShuffleAsLanePermuteAndBlend(DL, MVT::v8f32, V1, V2, Mask,
                                                   DAG, Subtarget);
  }

  // Try to simplify this by merging 128-bit lanes to enable a lane-based
  // shuffle.
  if (SDValue Result = lowerVectorShuffleByMerging128BitLanes(
          DL, MVT::v8f32, V1, V2, Mask, Subtarget, DAG))
    return Result;
  // If we have VLX support, we can use VEXPAND.
  if (Subtarget.hasVLX())
    if (SDValue V = lowerVectorShuffleToEXPAND(DL, MVT::v8f32, Zeroable, Mask,
                                               V1, V2, DAG, Subtarget))
      return V;

  // For non-AVX512 if the Mask is of 16bit elements in lane then try to split
  // since after split we get a more efficient code using vpunpcklwd and
  // vpunpckhwd instrs than vblend.
  if (!Subtarget.hasAVX512() && isUnpackWdShuffleMask(Mask, MVT::v8f32))
    if (SDValue V = lowerVectorShuffleAsSplitOrBlend(DL, MVT::v8f32, V1, V2,
                                                     Mask, DAG))
      return V;

  // If we have AVX2 then we always want to lower with a blend because at v8 we
  // can fully permute the elements.
  if (Subtarget.hasAVX2())
    return lowerVectorShuffleAsDecomposedShuffleBlend(DL, MVT::v8f32, V1, V2,
                                                      Mask, DAG);

  // Otherwise fall back on generic lowering.
  return lowerVectorShuffleAsSplitOrBlend(DL, MVT::v8f32, V1, V2, Mask, DAG);
}

/// \brief Handle lowering of 8-lane 32-bit integer shuffles.
///
/// This routine is only called when we have AVX2 and thus a reasonable
/// instruction set for v8i32 shuffling..
static SDValue lowerV8I32VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                       const APInt &Zeroable,
                                       SDValue V1, SDValue V2,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v8i32 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v8i32 && "Bad operand type!");
  assert(Mask.size() == 8 && "Unexpected mask size for v8 shuffle!");
  assert(Subtarget.hasAVX2() && "We can only lower v8i32 with AVX2!");

  // Whenever we can lower this as a zext, that instruction is strictly faster
  // than any alternative. It also allows us to fold memory operands into the
  // shuffle in many cases.
  if (SDValue ZExt = lowerVectorShuffleAsZeroOrAnyExtend(
          DL, MVT::v8i32, V1, V2, Mask, Zeroable, Subtarget, DAG))
    return ZExt;

  // For non-AVX512 if the Mask is of 16bit elements in lane then try to split
  // since after split we get a more efficient code than vblend by using
  // vpunpcklwd and vpunpckhwd instrs.
  if (isUnpackWdShuffleMask(Mask, MVT::v8i32) && !V2.isUndef() &&
      !Subtarget.hasAVX512())
    if (SDValue V =
            lowerVectorShuffleAsSplitOrBlend(DL, MVT::v8i32, V1, V2, Mask, DAG))
      return V;

  if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v8i32, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Blend;

  // Check for being able to broadcast a single element.
  if (SDValue Broadcast = lowerVectorShuffleAsBroadcast(DL, MVT::v8i32, V1, V2,
                                                        Mask, Subtarget, DAG))
    return Broadcast;

  // If the shuffle mask is repeated in each 128-bit lane we can use more
  // efficient instructions that mirror the shuffles across the two 128-bit
  // lanes.
  SmallVector<int, 4> RepeatedMask;
  bool Is128BitLaneRepeatedShuffle =
      is128BitLaneRepeatedShuffleMask(MVT::v8i32, Mask, RepeatedMask);
  if (Is128BitLaneRepeatedShuffle) {
    assert(RepeatedMask.size() == 4 && "Unexpected repeated mask size!");
    if (V2.isUndef())
      return DAG.getNode(X86ISD::PSHUFD, DL, MVT::v8i32, V1,
                         getV4X86ShuffleImm8ForMask(RepeatedMask, DL, DAG));

    // Use dedicated unpack instructions for masks that match their pattern.
    if (SDValue V =
            lowerVectorShuffleWithUNPCK(DL, MVT::v8i32, Mask, V1, V2, DAG))
      return V;
  }

  // Try to use shift instructions.
  if (SDValue Shift = lowerVectorShuffleAsShift(DL, MVT::v8i32, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Shift;

  // If we have VLX support, we can use VALIGN or EXPAND.
  if (Subtarget.hasVLX()) {
    if (SDValue Rotate = lowerVectorShuffleAsRotate(DL, MVT::v8i32, V1, V2,
                                                    Mask, Subtarget, DAG))
      return Rotate;

    if (SDValue V = lowerVectorShuffleToEXPAND(DL, MVT::v8i32, Zeroable, Mask,
                                               V1, V2, DAG, Subtarget))
      return V;
  }

  // Try to use byte rotation instructions.
  if (SDValue Rotate = lowerVectorShuffleAsByteRotate(
          DL, MVT::v8i32, V1, V2, Mask, Subtarget, DAG))
    return Rotate;

  // Try to create an in-lane repeating shuffle mask and then shuffle the
  // results into the target lanes.
  if (SDValue V = lowerShuffleAsRepeatedMaskAndLanePermute(
          DL, MVT::v8i32, V1, V2, Mask, Subtarget, DAG))
    return V;

  // If the shuffle patterns aren't repeated but it is a single input, directly
  // generate a cross-lane VPERMD instruction.
  if (V2.isUndef()) {
    SDValue VPermMask = getConstVector(Mask, MVT::v8i32, DAG, DL, true);
    return DAG.getNode(X86ISD::VPERMV, DL, MVT::v8i32, VPermMask, V1);
  }

  // Assume that a single SHUFPS is faster than an alternative sequence of
  // multiple instructions (even if the CPU has a domain penalty).
  // If some CPU is harmed by the domain switch, we can fix it in a later pass.
  if (Is128BitLaneRepeatedShuffle && isSingleSHUFPSMask(RepeatedMask)) {
    SDValue CastV1 = DAG.getBitcast(MVT::v8f32, V1);
    SDValue CastV2 = DAG.getBitcast(MVT::v8f32, V2);
    SDValue ShufPS = lowerVectorShuffleWithSHUFPS(DL, MVT::v8f32, RepeatedMask,
                                                  CastV1, CastV2, DAG);
    return DAG.getBitcast(MVT::v8i32, ShufPS);
  }

  // Try to simplify this by merging 128-bit lanes to enable a lane-based
  // shuffle.
  if (SDValue Result = lowerVectorShuffleByMerging128BitLanes(
          DL, MVT::v8i32, V1, V2, Mask, Subtarget, DAG))
    return Result;

  // Otherwise fall back on generic blend lowering.
  return lowerVectorShuffleAsDecomposedShuffleBlend(DL, MVT::v8i32, V1, V2,
                                                    Mask, DAG);
}

/// \brief Handle lowering of 16-lane 16-bit integer shuffles.
///
/// This routine is only called when we have AVX2 and thus a reasonable
/// instruction set for v16i16 shuffling..
static SDValue lowerV16I16VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                        const APInt &Zeroable,
                                        SDValue V1, SDValue V2,
                                        const X86Subtarget &Subtarget,
                                        SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v16i16 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v16i16 && "Bad operand type!");
  assert(Mask.size() == 16 && "Unexpected mask size for v16 shuffle!");
  assert(Subtarget.hasAVX2() && "We can only lower v16i16 with AVX2!");

  // Whenever we can lower this as a zext, that instruction is strictly faster
  // than any alternative. It also allows us to fold memory operands into the
  // shuffle in many cases.
  if (SDValue ZExt = lowerVectorShuffleAsZeroOrAnyExtend(
          DL, MVT::v16i16, V1, V2, Mask, Zeroable, Subtarget, DAG))
    return ZExt;

  // Check for being able to broadcast a single element.
  if (SDValue Broadcast = lowerVectorShuffleAsBroadcast(DL, MVT::v16i16, V1, V2,
                                                        Mask, Subtarget, DAG))
    return Broadcast;

  if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v16i16, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Blend;

  // Use dedicated unpack instructions for masks that match their pattern.
  if (SDValue V =
          lowerVectorShuffleWithUNPCK(DL, MVT::v16i16, Mask, V1, V2, DAG))
    return V;

  // Use dedicated pack instructions for masks that match their pattern.
  if (SDValue V = lowerVectorShuffleWithPACK(DL, MVT::v16i16, Mask, V1, V2, DAG,
                                             Subtarget))
    return V;

  // Try to use shift instructions.
  if (SDValue Shift = lowerVectorShuffleAsShift(DL, MVT::v16i16, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Shift;

  // Try to use byte rotation instructions.
  if (SDValue Rotate = lowerVectorShuffleAsByteRotate(
          DL, MVT::v16i16, V1, V2, Mask, Subtarget, DAG))
    return Rotate;

  // Try to create an in-lane repeating shuffle mask and then shuffle the
  // the results into the target lanes.
  if (SDValue V = lowerShuffleAsRepeatedMaskAndLanePermute(
          DL, MVT::v16i16, V1, V2, Mask, Subtarget, DAG))
    return V;

  if (V2.isUndef()) {
    // There are no generalized cross-lane shuffle operations available on i16
    // element types.
    if (is128BitLaneCrossingShuffleMask(MVT::v16i16, Mask))
      return lowerVectorShuffleAsLanePermuteAndBlend(DL, MVT::v16i16, V1, V2,
                                                     Mask, DAG, Subtarget);

    SmallVector<int, 8> RepeatedMask;
    if (is128BitLaneRepeatedShuffleMask(MVT::v16i16, Mask, RepeatedMask)) {
      // As this is a single-input shuffle, the repeated mask should be
      // a strictly valid v8i16 mask that we can pass through to the v8i16
      // lowering to handle even the v16 case.
      return lowerV8I16GeneralSingleInputVectorShuffle(
          DL, MVT::v16i16, V1, RepeatedMask, Subtarget, DAG);
    }
  }

  if (SDValue PSHUFB = lowerVectorShuffleWithPSHUFB(
          DL, MVT::v16i16, Mask, V1, V2, Zeroable, Subtarget, DAG))
    return PSHUFB;

  // AVX512BWVL can lower to VPERMW.
  if (Subtarget.hasBWI() && Subtarget.hasVLX())
    return lowerVectorShuffleWithPERMV(DL, MVT::v16i16, Mask, V1, V2, DAG);

  // Try to simplify this by merging 128-bit lanes to enable a lane-based
  // shuffle.
  if (SDValue Result = lowerVectorShuffleByMerging128BitLanes(
          DL, MVT::v16i16, V1, V2, Mask, Subtarget, DAG))
    return Result;

  // Otherwise fall back on generic lowering.
  return lowerVectorShuffleAsSplitOrBlend(DL, MVT::v16i16, V1, V2, Mask, DAG);
}

/// \brief Handle lowering of 32-lane 8-bit integer shuffles.
///
/// This routine is only called when we have AVX2 and thus a reasonable
/// instruction set for v32i8 shuffling..
static SDValue lowerV32I8VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                       const APInt &Zeroable,
                                       SDValue V1, SDValue V2,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v32i8 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v32i8 && "Bad operand type!");
  assert(Mask.size() == 32 && "Unexpected mask size for v32 shuffle!");
  assert(Subtarget.hasAVX2() && "We can only lower v32i8 with AVX2!");

  // Whenever we can lower this as a zext, that instruction is strictly faster
  // than any alternative. It also allows us to fold memory operands into the
  // shuffle in many cases.
  if (SDValue ZExt = lowerVectorShuffleAsZeroOrAnyExtend(
          DL, MVT::v32i8, V1, V2, Mask, Zeroable, Subtarget, DAG))
    return ZExt;

  // Check for being able to broadcast a single element.
  if (SDValue Broadcast = lowerVectorShuffleAsBroadcast(DL, MVT::v32i8, V1, V2,
                                                        Mask, Subtarget, DAG))
    return Broadcast;

  if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v32i8, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Blend;

  // Use dedicated unpack instructions for masks that match their pattern.
  if (SDValue V =
          lowerVectorShuffleWithUNPCK(DL, MVT::v32i8, Mask, V1, V2, DAG))
    return V;

  // Use dedicated pack instructions for masks that match their pattern.
  if (SDValue V = lowerVectorShuffleWithPACK(DL, MVT::v32i8, Mask, V1, V2, DAG,
                                             Subtarget))
    return V;

  // Try to use shift instructions.
  if (SDValue Shift = lowerVectorShuffleAsShift(DL, MVT::v32i8, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Shift;

  // Try to use byte rotation instructions.
  if (SDValue Rotate = lowerVectorShuffleAsByteRotate(
          DL, MVT::v32i8, V1, V2, Mask, Subtarget, DAG))
    return Rotate;

  // Try to create an in-lane repeating shuffle mask and then shuffle the
  // the results into the target lanes.
  if (SDValue V = lowerShuffleAsRepeatedMaskAndLanePermute(
          DL, MVT::v32i8, V1, V2, Mask, Subtarget, DAG))
    return V;

  // There are no generalized cross-lane shuffle operations available on i8
  // element types.
  if (V2.isUndef() && is128BitLaneCrossingShuffleMask(MVT::v32i8, Mask))
    return lowerVectorShuffleAsLanePermuteAndBlend(DL, MVT::v32i8, V1, V2, Mask,
                                                   DAG, Subtarget);

  if (SDValue PSHUFB = lowerVectorShuffleWithPSHUFB(
          DL, MVT::v32i8, Mask, V1, V2, Zeroable, Subtarget, DAG))
    return PSHUFB;

  // Try to simplify this by merging 128-bit lanes to enable a lane-based
  // shuffle.
  if (SDValue Result = lowerVectorShuffleByMerging128BitLanes(
          DL, MVT::v32i8, V1, V2, Mask, Subtarget, DAG))
    return Result;

  // Otherwise fall back on generic lowering.
  return lowerVectorShuffleAsSplitOrBlend(DL, MVT::v32i8, V1, V2, Mask, DAG);
}

/// \brief High-level routine to lower various 256-bit x86 vector shuffles.
///
/// This routine either breaks down the specific type of a 256-bit x86 vector
/// shuffle or splits it into two 128-bit shuffles and fuses the results back
/// together based on the available instructions.
static SDValue lower256BitVectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                        MVT VT, SDValue V1, SDValue V2,
                                        const APInt &Zeroable,
                                        const X86Subtarget &Subtarget,
                                        SelectionDAG &DAG) {
  // If we have a single input to the zero element, insert that into V1 if we
  // can do so cheaply.
  int NumElts = VT.getVectorNumElements();
  int NumV2Elements = count_if(Mask, [NumElts](int M) { return M >= NumElts; });

  if (NumV2Elements == 1 && Mask[0] >= NumElts)
    if (SDValue Insertion = lowerVectorShuffleAsElementInsertion(
            DL, VT, V1, V2, Mask, Zeroable, Subtarget, DAG))
      return Insertion;

  // Handle special cases where the lower or upper half is UNDEF.
  if (SDValue V =
          lowerVectorShuffleWithUndefHalf(DL, VT, V1, V2, Mask, Subtarget, DAG))
    return V;

  // There is a really nice hard cut-over between AVX1 and AVX2 that means we
  // can check for those subtargets here and avoid much of the subtarget
  // querying in the per-vector-type lowering routines. With AVX1 we have
  // essentially *zero* ability to manipulate a 256-bit vector with integer
  // types. Since we'll use floating point types there eventually, just
  // immediately cast everything to a float and operate entirely in that domain.
  if (VT.isInteger() && !Subtarget.hasAVX2()) {
    int ElementBits = VT.getScalarSizeInBits();
    if (ElementBits < 32) {
      // No floating point type available, if we can't use the bit operations
      // for masking/blending then decompose into 128-bit vectors.
      if (SDValue V =
              lowerVectorShuffleAsBitMask(DL, VT, V1, V2, Mask, Zeroable, DAG))
        return V;
      if (SDValue V = lowerVectorShuffleAsBitBlend(DL, VT, V1, V2, Mask, DAG))
        return V;
      return splitAndLowerVectorShuffle(DL, VT, V1, V2, Mask, DAG);
    }

    MVT FpVT = MVT::getVectorVT(MVT::getFloatingPointVT(ElementBits),
                                VT.getVectorNumElements());
    V1 = DAG.getBitcast(FpVT, V1);
    V2 = DAG.getBitcast(FpVT, V2);
    return DAG.getBitcast(VT, DAG.getVectorShuffle(FpVT, DL, V1, V2, Mask));
  }

  switch (VT.SimpleTy) {
  case MVT::v4f64:
    return lowerV4F64VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);
  case MVT::v4i64:
    return lowerV4I64VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);
  case MVT::v8f32:
    return lowerV8F32VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);
  case MVT::v8i32:
    return lowerV8I32VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);
  case MVT::v16i16:
    return lowerV16I16VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);
  case MVT::v32i8:
    return lowerV32I8VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);

  default:
    llvm_unreachable("Not a valid 256-bit x86 vector type!");
  }
}

/// \brief Try to lower a vector shuffle as a 128-bit shuffles.
static SDValue lowerV4X128VectorShuffle(const SDLoc &DL, MVT VT,
                                        ArrayRef<int> Mask, SDValue V1,
                                        SDValue V2, SelectionDAG &DAG) {
  assert(VT.getScalarSizeInBits() == 64 &&
         "Unexpected element type size for 128bit shuffle.");

  // To handle 256 bit vector requires VLX and most probably
  // function lowerV2X128VectorShuffle() is better solution.
  assert(VT.is512BitVector() && "Unexpected vector size for 512bit shuffle.");

  SmallVector<int, 4> WidenedMask;
  if (!canWidenShuffleElements(Mask, WidenedMask))
    return SDValue();

  // Check for patterns which can be matched with a single insert of a 256-bit
  // subvector.
  bool OnlyUsesV1 = isShuffleEquivalent(V1, V2, Mask,
                                        {0, 1, 2, 3, 0, 1, 2, 3});
  if (OnlyUsesV1 || isShuffleEquivalent(V1, V2, Mask,
                                        {0, 1, 2, 3, 8, 9, 10, 11})) {
    MVT SubVT = MVT::getVectorVT(VT.getVectorElementType(), 4);
    SDValue LoV = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, SubVT, V1,
                              DAG.getIntPtrConstant(0, DL));
    SDValue HiV = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, SubVT,
                              OnlyUsesV1 ? V1 : V2,
                              DAG.getIntPtrConstant(0, DL));
    return DAG.getNode(ISD::CONCAT_VECTORS, DL, VT, LoV, HiV);
  }

  assert(WidenedMask.size() == 4);

  // See if this is an insertion of the lower 128-bits of V2 into V1.
  bool IsInsert = true;
  int V2Index = -1;
  for (int i = 0; i < 4; ++i) {
    assert(WidenedMask[i] >= -1);
    if (WidenedMask[i] < 0)
      continue;

    // Make sure all V1 subvectors are in place.
    if (WidenedMask[i] < 4) {
      if (WidenedMask[i] != i) {
        IsInsert = false;
        break;
      }
    } else {
      // Make sure we only have a single V2 index and its the lowest 128-bits.
      if (V2Index >= 0 || WidenedMask[i] != 4) {
        IsInsert = false;
        break;
      }
      V2Index = i;
    }
  }
  if (IsInsert && V2Index >= 0) {
    MVT SubVT = MVT::getVectorVT(VT.getVectorElementType(), 2);
    SDValue Subvec = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, SubVT, V2,
                                 DAG.getIntPtrConstant(0, DL));
    return insert128BitVector(V1, Subvec, V2Index * 2, DAG, DL);
  }

  // Try to lower to to vshuf64x2/vshuf32x4.
  SDValue Ops[2] = {DAG.getUNDEF(VT), DAG.getUNDEF(VT)};
  unsigned PermMask = 0;
  // Insure elements came from the same Op.
  for (int i = 0; i < 4; ++i) {
    assert(WidenedMask[i] >= -1);
    if (WidenedMask[i] < 0)
      continue;

    SDValue Op = WidenedMask[i] >= 4 ? V2 : V1;
    unsigned OpIndex = i / 2;
    if (Ops[OpIndex].isUndef())
      Ops[OpIndex] = Op;
    else if (Ops[OpIndex] != Op)
      return SDValue();

    // Convert the 128-bit shuffle mask selection values into 128-bit selection
    // bits defined by a vshuf64x2 instruction's immediate control byte.
    PermMask |= (WidenedMask[i] % 4) << (i * 2);
  }

  return DAG.getNode(X86ISD::SHUF128, DL, VT, Ops[0], Ops[1],
                     DAG.getConstant(PermMask, DL, MVT::i8));
}

/// \brief Handle lowering of 8-lane 64-bit floating point shuffles.
static SDValue lowerV8F64VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                       const APInt &Zeroable,
                                       SDValue V1, SDValue V2,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v8f64 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v8f64 && "Bad operand type!");
  assert(Mask.size() == 8 && "Unexpected mask size for v8 shuffle!");

  if (V2.isUndef()) {
    // Use low duplicate instructions for masks that match their pattern.
    if (isShuffleEquivalent(V1, V2, Mask, {0, 0, 2, 2, 4, 4, 6, 6}))
      return DAG.getNode(X86ISD::MOVDDUP, DL, MVT::v8f64, V1);

    if (!is128BitLaneCrossingShuffleMask(MVT::v8f64, Mask)) {
      // Non-half-crossing single input shuffles can be lowered with an
      // interleaved permutation.
      unsigned VPERMILPMask = (Mask[0] == 1) | ((Mask[1] == 1) << 1) |
                              ((Mask[2] == 3) << 2) | ((Mask[3] == 3) << 3) |
                              ((Mask[4] == 5) << 4) | ((Mask[5] == 5) << 5) |
                              ((Mask[6] == 7) << 6) | ((Mask[7] == 7) << 7);
      return DAG.getNode(X86ISD::VPERMILPI, DL, MVT::v8f64, V1,
                         DAG.getConstant(VPERMILPMask, DL, MVT::i8));
    }

    SmallVector<int, 4> RepeatedMask;
    if (is256BitLaneRepeatedShuffleMask(MVT::v8f64, Mask, RepeatedMask))
      return DAG.getNode(X86ISD::VPERMI, DL, MVT::v8f64, V1,
                         getV4X86ShuffleImm8ForMask(RepeatedMask, DL, DAG));
  }

  if (SDValue Shuf128 =
          lowerV4X128VectorShuffle(DL, MVT::v8f64, Mask, V1, V2, DAG))
    return Shuf128;

  if (SDValue Unpck =
          lowerVectorShuffleWithUNPCK(DL, MVT::v8f64, Mask, V1, V2, DAG))
    return Unpck;

  // Check if the blend happens to exactly fit that of SHUFPD.
  if (SDValue Op =
      lowerVectorShuffleWithSHUFPD(DL, MVT::v8f64, Mask, V1, V2, DAG))
    return Op;

  if (SDValue V = lowerVectorShuffleToEXPAND(DL, MVT::v8f64, Zeroable, Mask, V1,
                                             V2, DAG, Subtarget))
    return V;

  if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v8f64, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Blend;

  return lowerVectorShuffleWithPERMV(DL, MVT::v8f64, Mask, V1, V2, DAG);
}

/// \brief Handle lowering of 16-lane 32-bit floating point shuffles.
static SDValue lowerV16F32VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                        const APInt &Zeroable,
                                        SDValue V1, SDValue V2,
                                        const X86Subtarget &Subtarget,
                                        SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v16f32 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v16f32 && "Bad operand type!");
  assert(Mask.size() == 16 && "Unexpected mask size for v16 shuffle!");

  // If the shuffle mask is repeated in each 128-bit lane, we have many more
  // options to efficiently lower the shuffle.
  SmallVector<int, 4> RepeatedMask;
  if (is128BitLaneRepeatedShuffleMask(MVT::v16f32, Mask, RepeatedMask)) {
    assert(RepeatedMask.size() == 4 && "Unexpected repeated mask size!");

    // Use even/odd duplicate instructions for masks that match their pattern.
    if (isShuffleEquivalent(V1, V2, RepeatedMask, {0, 0, 2, 2}))
      return DAG.getNode(X86ISD::MOVSLDUP, DL, MVT::v16f32, V1);
    if (isShuffleEquivalent(V1, V2, RepeatedMask, {1, 1, 3, 3}))
      return DAG.getNode(X86ISD::MOVSHDUP, DL, MVT::v16f32, V1);

    if (V2.isUndef())
      return DAG.getNode(X86ISD::VPERMILPI, DL, MVT::v16f32, V1,
                         getV4X86ShuffleImm8ForMask(RepeatedMask, DL, DAG));

    // Use dedicated unpack instructions for masks that match their pattern.
    if (SDValue Unpck =
            lowerVectorShuffleWithUNPCK(DL, MVT::v16f32, Mask, V1, V2, DAG))
      return Unpck;

    if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v16f32, V1, V2, Mask,
                                                  Zeroable, Subtarget, DAG))
      return Blend;

    // Otherwise, fall back to a SHUFPS sequence.
    return lowerVectorShuffleWithSHUFPS(DL, MVT::v16f32, RepeatedMask, V1, V2, DAG);
  }

  // If we have a single input shuffle with different shuffle patterns in the
  // 128-bit lanes and don't lane cross, use variable mask VPERMILPS.
  if (V2.isUndef() &&
      !is128BitLaneCrossingShuffleMask(MVT::v16f32, Mask)) {
    SDValue VPermMask = getConstVector(Mask, MVT::v16i32, DAG, DL, true);
    return DAG.getNode(X86ISD::VPERMILPV, DL, MVT::v16f32, V1, VPermMask);
  }

  // If we have AVX512F support, we can use VEXPAND.
  if (SDValue V = lowerVectorShuffleToEXPAND(DL, MVT::v16f32, Zeroable, Mask,
                                             V1, V2, DAG, Subtarget))
    return V;

  return lowerVectorShuffleWithPERMV(DL, MVT::v16f32, Mask, V1, V2, DAG);
}

/// \brief Handle lowering of 8-lane 64-bit integer shuffles.
static SDValue lowerV8I64VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                       const APInt &Zeroable,
                                       SDValue V1, SDValue V2,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v8i64 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v8i64 && "Bad operand type!");
  assert(Mask.size() == 8 && "Unexpected mask size for v8 shuffle!");

  if (V2.isUndef()) {
    // When the shuffle is mirrored between the 128-bit lanes of the unit, we
    // can use lower latency instructions that will operate on all four
    // 128-bit lanes.
    SmallVector<int, 2> Repeated128Mask;
    if (is128BitLaneRepeatedShuffleMask(MVT::v8i64, Mask, Repeated128Mask)) {
      SmallVector<int, 4> PSHUFDMask;
      scaleShuffleMask<int>(2, Repeated128Mask, PSHUFDMask);
      return DAG.getBitcast(
          MVT::v8i64,
          DAG.getNode(X86ISD::PSHUFD, DL, MVT::v16i32,
                      DAG.getBitcast(MVT::v16i32, V1),
                      getV4X86ShuffleImm8ForMask(PSHUFDMask, DL, DAG)));
    }

    SmallVector<int, 4> Repeated256Mask;
    if (is256BitLaneRepeatedShuffleMask(MVT::v8i64, Mask, Repeated256Mask))
      return DAG.getNode(X86ISD::VPERMI, DL, MVT::v8i64, V1,
                         getV4X86ShuffleImm8ForMask(Repeated256Mask, DL, DAG));
  }

  if (SDValue Shuf128 =
          lowerV4X128VectorShuffle(DL, MVT::v8i64, Mask, V1, V2, DAG))
    return Shuf128;

  // Try to use shift instructions.
  if (SDValue Shift = lowerVectorShuffleAsShift(DL, MVT::v8i64, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Shift;

  // Try to use VALIGN.
  if (SDValue Rotate = lowerVectorShuffleAsRotate(DL, MVT::v8i64, V1, V2,
                                                  Mask, Subtarget, DAG))
    return Rotate;

  // Try to use PALIGNR.
  if (SDValue Rotate = lowerVectorShuffleAsByteRotate(DL, MVT::v8i64, V1, V2,
                                                      Mask, Subtarget, DAG))
    return Rotate;

  if (SDValue Unpck =
          lowerVectorShuffleWithUNPCK(DL, MVT::v8i64, Mask, V1, V2, DAG))
    return Unpck;
  // If we have AVX512F support, we can use VEXPAND.
  if (SDValue V = lowerVectorShuffleToEXPAND(DL, MVT::v8i64, Zeroable, Mask, V1,
                                             V2, DAG, Subtarget))
    return V;

  if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v8i64, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Blend;

  return lowerVectorShuffleWithPERMV(DL, MVT::v8i64, Mask, V1, V2, DAG);
}

/// \brief Handle lowering of 16-lane 32-bit integer shuffles.
static SDValue lowerV16I32VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                        const APInt &Zeroable,
                                        SDValue V1, SDValue V2,
                                        const X86Subtarget &Subtarget,
                                        SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v16i32 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v16i32 && "Bad operand type!");
  assert(Mask.size() == 16 && "Unexpected mask size for v16 shuffle!");

  // Whenever we can lower this as a zext, that instruction is strictly faster
  // than any alternative. It also allows us to fold memory operands into the
  // shuffle in many cases.
  if (SDValue ZExt = lowerVectorShuffleAsZeroOrAnyExtend(
          DL, MVT::v16i32, V1, V2, Mask, Zeroable, Subtarget, DAG))
    return ZExt;

  // If the shuffle mask is repeated in each 128-bit lane we can use more
  // efficient instructions that mirror the shuffles across the four 128-bit
  // lanes.
  SmallVector<int, 4> RepeatedMask;
  bool Is128BitLaneRepeatedShuffle =
      is128BitLaneRepeatedShuffleMask(MVT::v16i32, Mask, RepeatedMask);
  if (Is128BitLaneRepeatedShuffle) {
    assert(RepeatedMask.size() == 4 && "Unexpected repeated mask size!");
    if (V2.isUndef())
      return DAG.getNode(X86ISD::PSHUFD, DL, MVT::v16i32, V1,
                         getV4X86ShuffleImm8ForMask(RepeatedMask, DL, DAG));

    // Use dedicated unpack instructions for masks that match their pattern.
    if (SDValue V =
            lowerVectorShuffleWithUNPCK(DL, MVT::v16i32, Mask, V1, V2, DAG))
      return V;
  }

  // Try to use shift instructions.
  if (SDValue Shift = lowerVectorShuffleAsShift(DL, MVT::v16i32, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Shift;

  // Try to use VALIGN.
  if (SDValue Rotate = lowerVectorShuffleAsRotate(DL, MVT::v16i32, V1, V2,
                                                  Mask, Subtarget, DAG))
    return Rotate;

  // Try to use byte rotation instructions.
  if (Subtarget.hasBWI())
    if (SDValue Rotate = lowerVectorShuffleAsByteRotate(
            DL, MVT::v16i32, V1, V2, Mask, Subtarget, DAG))
      return Rotate;

  // Assume that a single SHUFPS is faster than using a permv shuffle.
  // If some CPU is harmed by the domain switch, we can fix it in a later pass.
  if (Is128BitLaneRepeatedShuffle && isSingleSHUFPSMask(RepeatedMask)) {
    SDValue CastV1 = DAG.getBitcast(MVT::v16f32, V1);
    SDValue CastV2 = DAG.getBitcast(MVT::v16f32, V2);
    SDValue ShufPS = lowerVectorShuffleWithSHUFPS(DL, MVT::v16f32, RepeatedMask,
                                                  CastV1, CastV2, DAG);
    return DAG.getBitcast(MVT::v16i32, ShufPS);
  }
  // If we have AVX512F support, we can use VEXPAND.
  if (SDValue V = lowerVectorShuffleToEXPAND(DL, MVT::v16i32, Zeroable, Mask,
                                             V1, V2, DAG, Subtarget))
    return V;

  if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v16i32, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Blend;
  return lowerVectorShuffleWithPERMV(DL, MVT::v16i32, Mask, V1, V2, DAG);
}

/// \brief Handle lowering of 32-lane 16-bit integer shuffles.
static SDValue lowerV32I16VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                        const APInt &Zeroable,
                                        SDValue V1, SDValue V2,
                                        const X86Subtarget &Subtarget,
                                        SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v32i16 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v32i16 && "Bad operand type!");
  assert(Mask.size() == 32 && "Unexpected mask size for v32 shuffle!");
  assert(Subtarget.hasBWI() && "We can only lower v32i16 with AVX-512-BWI!");

  // Whenever we can lower this as a zext, that instruction is strictly faster
  // than any alternative. It also allows us to fold memory operands into the
  // shuffle in many cases.
  if (SDValue ZExt = lowerVectorShuffleAsZeroOrAnyExtend(
          DL, MVT::v32i16, V1, V2, Mask, Zeroable, Subtarget, DAG))
    return ZExt;

  // Use dedicated unpack instructions for masks that match their pattern.
  if (SDValue V =
          lowerVectorShuffleWithUNPCK(DL, MVT::v32i16, Mask, V1, V2, DAG))
    return V;

  // Try to use shift instructions.
  if (SDValue Shift = lowerVectorShuffleAsShift(DL, MVT::v32i16, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Shift;

  // Try to use byte rotation instructions.
  if (SDValue Rotate = lowerVectorShuffleAsByteRotate(
          DL, MVT::v32i16, V1, V2, Mask, Subtarget, DAG))
    return Rotate;

  if (V2.isUndef()) {
    SmallVector<int, 8> RepeatedMask;
    if (is128BitLaneRepeatedShuffleMask(MVT::v32i16, Mask, RepeatedMask)) {
      // As this is a single-input shuffle, the repeated mask should be
      // a strictly valid v8i16 mask that we can pass through to the v8i16
      // lowering to handle even the v32 case.
      return lowerV8I16GeneralSingleInputVectorShuffle(
          DL, MVT::v32i16, V1, RepeatedMask, Subtarget, DAG);
    }
  }

  if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v32i16, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Blend;

  return lowerVectorShuffleWithPERMV(DL, MVT::v32i16, Mask, V1, V2, DAG);
}

/// \brief Handle lowering of 64-lane 8-bit integer shuffles.
static SDValue lowerV64I8VectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                       const APInt &Zeroable,
                                       SDValue V1, SDValue V2,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  assert(V1.getSimpleValueType() == MVT::v64i8 && "Bad operand type!");
  assert(V2.getSimpleValueType() == MVT::v64i8 && "Bad operand type!");
  assert(Mask.size() == 64 && "Unexpected mask size for v64 shuffle!");
  assert(Subtarget.hasBWI() && "We can only lower v64i8 with AVX-512-BWI!");

  // Whenever we can lower this as a zext, that instruction is strictly faster
  // than any alternative. It also allows us to fold memory operands into the
  // shuffle in many cases.
  if (SDValue ZExt = lowerVectorShuffleAsZeroOrAnyExtend(
          DL, MVT::v64i8, V1, V2, Mask, Zeroable, Subtarget, DAG))
    return ZExt;

  // Use dedicated unpack instructions for masks that match their pattern.
  if (SDValue V =
          lowerVectorShuffleWithUNPCK(DL, MVT::v64i8, Mask, V1, V2, DAG))
    return V;

  // Try to use shift instructions.
  if (SDValue Shift = lowerVectorShuffleAsShift(DL, MVT::v64i8, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Shift;

  // Try to use byte rotation instructions.
  if (SDValue Rotate = lowerVectorShuffleAsByteRotate(
          DL, MVT::v64i8, V1, V2, Mask, Subtarget, DAG))
    return Rotate;

  if (SDValue PSHUFB = lowerVectorShuffleWithPSHUFB(
          DL, MVT::v64i8, Mask, V1, V2, Zeroable, Subtarget, DAG))
    return PSHUFB;

  // VBMI can use VPERMV/VPERMV3 byte shuffles.
  if (Subtarget.hasVBMI())
    return lowerVectorShuffleWithPERMV(DL, MVT::v64i8, Mask, V1, V2, DAG);

  // Try to create an in-lane repeating shuffle mask and then shuffle the
  // the results into the target lanes.
  if (SDValue V = lowerShuffleAsRepeatedMaskAndLanePermute(
          DL, MVT::v64i8, V1, V2, Mask, Subtarget, DAG))
    return V;

  if (SDValue Blend = lowerVectorShuffleAsBlend(DL, MVT::v64i8, V1, V2, Mask,
                                                Zeroable, Subtarget, DAG))
    return Blend;

  // FIXME: Implement direct support for this type!
  return splitAndLowerVectorShuffle(DL, MVT::v64i8, V1, V2, Mask, DAG);
}

/// \brief High-level routine to lower various 512-bit x86 vector shuffles.
///
/// This routine either breaks down the specific type of a 512-bit x86 vector
/// shuffle or splits it into two 256-bit shuffles and fuses the results back
/// together based on the available instructions.
static SDValue lower512BitVectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                        MVT VT, SDValue V1, SDValue V2,
                                        const APInt &Zeroable,
                                        const X86Subtarget &Subtarget,
                                        SelectionDAG &DAG) {
  assert(Subtarget.hasAVX512() &&
         "Cannot lower 512-bit vectors w/ basic ISA!");

  // If we have a single input to the zero element, insert that into V1 if we
  // can do so cheaply.
  int NumElts = Mask.size();
  int NumV2Elements = count_if(Mask, [NumElts](int M) { return M >= NumElts; });

  if (NumV2Elements == 1 && Mask[0] >= NumElts)
    if (SDValue Insertion = lowerVectorShuffleAsElementInsertion(
            DL, VT, V1, V2, Mask, Zeroable, Subtarget, DAG))
      return Insertion;

  // Handle special cases where the lower or upper half is UNDEF.
  if (SDValue V =
        lowerVectorShuffleWithUndefHalf(DL, VT, V1, V2, Mask, Subtarget, DAG))
    return V;

  // Check for being able to broadcast a single element.
  if (SDValue Broadcast =
          lowerVectorShuffleAsBroadcast(DL, VT, V1, V2, Mask, Subtarget, DAG))
    return Broadcast;

  // Dispatch to each element type for lowering. If we don't have support for
  // specific element type shuffles at 512 bits, immediately split them and
  // lower them. Each lowering routine of a given type is allowed to assume that
  // the requisite ISA extensions for that element type are available.
  switch (VT.SimpleTy) {
  case MVT::v8f64:
    return lowerV8F64VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);
  case MVT::v16f32:
    return lowerV16F32VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);
  case MVT::v8i64:
    return lowerV8I64VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);
  case MVT::v16i32:
    return lowerV16I32VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);
  case MVT::v32i16:
    return lowerV32I16VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);
  case MVT::v64i8:
    return lowerV64I8VectorShuffle(DL, Mask, Zeroable, V1, V2, Subtarget, DAG);

  default:
    llvm_unreachable("Not a valid 512-bit x86 vector type!");
  }
}

// Lower vXi1 vector shuffles.
// There is no a dedicated instruction on AVX-512 that shuffles the masks.
// The only way to shuffle bits is to sign-extend the mask vector to SIMD
// vector, shuffle and then truncate it back.
static SDValue lower1BitVectorShuffle(const SDLoc &DL, ArrayRef<int> Mask,
                                      MVT VT, SDValue V1, SDValue V2,
                                      const X86Subtarget &Subtarget,
                                      SelectionDAG &DAG) {
  assert(Subtarget.hasAVX512() &&
         "Cannot lower 512-bit vectors w/o basic ISA!");
  MVT ExtVT;
  switch (VT.SimpleTy) {
  default:
    llvm_unreachable("Expected a vector of i1 elements");
  case MVT::v2i1:
    ExtVT = MVT::v2i64;
    break;
  case MVT::v4i1:
    ExtVT = MVT::v4i32;
    break;
  case MVT::v8i1:
    ExtVT = MVT::v8i64; // Take 512-bit type, more shuffles on KNL
    break;
  case MVT::v16i1:
    ExtVT = MVT::v16i32;
    break;
  case MVT::v32i1:
    ExtVT = MVT::v32i16;
    break;
  case MVT::v64i1:
    ExtVT = MVT::v64i8;
    break;
  }

  if (ISD::isBuildVectorAllZeros(V1.getNode()))
    V1 = getZeroVector(ExtVT, Subtarget, DAG, DL);
  else if (ISD::isBuildVectorAllOnes(V1.getNode()))
    V1 = getOnesVector(ExtVT, DAG, DL);
  else
    V1 = DAG.getNode(ISD::SIGN_EXTEND, DL, ExtVT, V1);

  if (V2.isUndef())
    V2 = DAG.getUNDEF(ExtVT);
  else if (ISD::isBuildVectorAllZeros(V2.getNode()))
    V2 = getZeroVector(ExtVT, Subtarget, DAG, DL);
  else if (ISD::isBuildVectorAllOnes(V2.getNode()))
    V2 = getOnesVector(ExtVT, DAG, DL);
  else
    V2 = DAG.getNode(ISD::SIGN_EXTEND, DL, ExtVT, V2);

  SDValue Shuffle = DAG.getVectorShuffle(ExtVT, DL, V1, V2, Mask);
  // i1 was sign extended we can use X86ISD::CVT2MASK.
  int NumElems = VT.getVectorNumElements();
  if ((Subtarget.hasBWI() && (NumElems >= 32)) ||
      (Subtarget.hasDQI() && (NumElems < 32)))
    return DAG.getNode(X86ISD::CVT2MASK, DL, VT, Shuffle);

  return DAG.getNode(ISD::TRUNCATE, DL, VT, Shuffle);
}

/// Helper function that returns true if the shuffle mask should be
/// commuted to improve canonicalization.
static bool canonicalizeShuffleMaskWithCommute(ArrayRef<int> Mask) {
  int NumElements = Mask.size();

  int NumV1Elements = 0, NumV2Elements = 0;
  for (int M : Mask)
    if (M < 0)
      continue;
    else if (M < NumElements)
      ++NumV1Elements;
    else
      ++NumV2Elements;

  // Commute the shuffle as needed such that more elements come from V1 than
  // V2. This allows us to match the shuffle pattern strictly on how many
  // elements come from V1 without handling the symmetric cases.
  if (NumV2Elements > NumV1Elements)
    return true;

  assert(NumV1Elements > 0 && "No V1 indices");

  if (NumV2Elements == 0)
    return false;

  // When the number of V1 and V2 elements are the same, try to minimize the
  // number of uses of V2 in the low half of the vector. When that is tied,
  // ensure that the sum of indices for V1 is equal to or lower than the sum
  // indices for V2. When those are equal, try to ensure that the number of odd
  // indices for V1 is lower than the number of odd indices for V2.
  if (NumV1Elements == NumV2Elements) {
    int LowV1Elements = 0, LowV2Elements = 0;
    for (int M : Mask.slice(0, NumElements / 2))
      if (M >= NumElements)
        ++LowV2Elements;
      else if (M >= 0)
        ++LowV1Elements;
    if (LowV2Elements > LowV1Elements)
      return true;
    if (LowV2Elements == LowV1Elements) {
      int SumV1Indices = 0, SumV2Indices = 0;
      for (int i = 0, Size = Mask.size(); i < Size; ++i)
        if (Mask[i] >= NumElements)
          SumV2Indices += i;
        else if (Mask[i] >= 0)
          SumV1Indices += i;
      if (SumV2Indices < SumV1Indices)
        return true;
      if (SumV2Indices == SumV1Indices) {
        int NumV1OddIndices = 0, NumV2OddIndices = 0;
        for (int i = 0, Size = Mask.size(); i < Size; ++i)
          if (Mask[i] >= NumElements)
            NumV2OddIndices += i % 2;
          else if (Mask[i] >= 0)
            NumV1OddIndices += i % 2;
        if (NumV2OddIndices < NumV1OddIndices)
          return true;
      }
    }
  }

  return false;
}

/// \brief Top-level lowering for x86 vector shuffles.
///
/// This handles decomposition, canonicalization, and lowering of all x86
/// vector shuffles. Most of the specific lowering strategies are encapsulated
/// above in helper routines. The canonicalization attempts to widen shuffles
/// to involve fewer lanes of wider elements, consolidate symmetric patterns
/// s.t. only one of the two inputs needs to be tested, etc.
static SDValue lowerVectorShuffle(SDValue Op, const X86Subtarget &Subtarget,
                                  SelectionDAG &DAG) {
  ShuffleVectorSDNode *SVOp = cast<ShuffleVectorSDNode>(Op);
  ArrayRef<int> Mask = SVOp->getMask();
  SDValue V1 = Op.getOperand(0);
  SDValue V2 = Op.getOperand(1);
  MVT VT = Op.getSimpleValueType();
  int NumElements = VT.getVectorNumElements();
  SDLoc DL(Op);
  bool Is1BitVector = (VT.getVectorElementType() == MVT::i1);

  assert((VT.getSizeInBits() != 64 || Is1BitVector) &&
         "Can't lower MMX shuffles");

  bool V1IsUndef = V1.isUndef();
  bool V2IsUndef = V2.isUndef();
  if (V1IsUndef && V2IsUndef)
    return DAG.getUNDEF(VT);

  // When we create a shuffle node we put the UNDEF node to second operand,
  // but in some cases the first operand may be transformed to UNDEF.
  // In this case we should just commute the node.
  if (V1IsUndef)
    return DAG.getCommutedVectorShuffle(*SVOp);

  // Check for non-undef masks pointing at an undef vector and make the masks
  // undef as well. This makes it easier to match the shuffle based solely on
  // the mask.
  if (V2IsUndef)
    for (int M : Mask)
      if (M >= NumElements) {
        SmallVector<int, 8> NewMask(Mask.begin(), Mask.end());
        for (int &M : NewMask)
          if (M >= NumElements)
            M = -1;
        return DAG.getVectorShuffle(VT, DL, V1, V2, NewMask);
      }

  // Check for illegal shuffle mask element index values.
  int MaskUpperLimit = Mask.size() * (V2IsUndef ? 1 : 2); (void)MaskUpperLimit;
  assert(llvm::all_of(Mask,
                      [&](int M) { return -1 <= M && M < MaskUpperLimit; }) &&
         "Out of bounds shuffle index");

  // We actually see shuffles that are entirely re-arrangements of a set of
  // zero inputs. This mostly happens while decomposing complex shuffles into
  // simple ones. Directly lower these as a buildvector of zeros.
  APInt Zeroable = computeZeroableShuffleElements(Mask, V1, V2);
  if (Zeroable.isAllOnesValue())
    return getZeroVector(VT, Subtarget, DAG, DL);

  // Try to collapse shuffles into using a vector type with fewer elements but
  // wider element types. We cap this to not form integers or floating point
  // elements wider than 64 bits, but it might be interesting to form i128
  // integers to handle flipping the low and high halves of AVX 256-bit vectors.
  SmallVector<int, 16> WidenedMask;
  if (VT.getScalarSizeInBits() < 64 && !Is1BitVector &&
      canWidenShuffleElements(Mask, WidenedMask)) {
    MVT NewEltVT = VT.isFloatingPoint()
                       ? MVT::getFloatingPointVT(VT.getScalarSizeInBits() * 2)
                       : MVT::getIntegerVT(VT.getScalarSizeInBits() * 2);
    MVT NewVT = MVT::getVectorVT(NewEltVT, VT.getVectorNumElements() / 2);
    // Make sure that the new vector type is legal. For example, v2f64 isn't
    // legal on SSE1.
    if (DAG.getTargetLoweringInfo().isTypeLegal(NewVT)) {
      V1 = DAG.getBitcast(NewVT, V1);
      V2 = DAG.getBitcast(NewVT, V2);
      return DAG.getBitcast(
          VT, DAG.getVectorShuffle(NewVT, DL, V1, V2, WidenedMask));
    }
  }

  // Commute the shuffle if it will improve canonicalization.
  if (canonicalizeShuffleMaskWithCommute(Mask))
    return DAG.getCommutedVectorShuffle(*SVOp);

  // For each vector width, delegate to a specialized lowering routine.
  if (VT.is128BitVector())
    return lower128BitVectorShuffle(DL, Mask, VT, V1, V2, Zeroable, Subtarget,
                                    DAG);

  if (VT.is256BitVector())
    return lower256BitVectorShuffle(DL, Mask, VT, V1, V2, Zeroable, Subtarget,
                                    DAG);

  if (VT.is512BitVector())
    return lower512BitVectorShuffle(DL, Mask, VT, V1, V2, Zeroable, Subtarget,
                                    DAG);

  if (Is1BitVector)
    return lower1BitVectorShuffle(DL, Mask, VT, V1, V2, Subtarget, DAG);

  llvm_unreachable("Unimplemented!");
}

/// \brief Try to lower a VSELECT instruction to a vector shuffle.
static SDValue lowerVSELECTtoVectorShuffle(SDValue Op,
                                           const X86Subtarget &Subtarget,
                                           SelectionDAG &DAG) {
  SDValue Cond = Op.getOperand(0);
  SDValue LHS = Op.getOperand(1);
  SDValue RHS = Op.getOperand(2);
  SDLoc dl(Op);
  MVT VT = Op.getSimpleValueType();

  if (!ISD::isBuildVectorOfConstantSDNodes(Cond.getNode()))
    return SDValue();
  auto *CondBV = cast<BuildVectorSDNode>(Cond);

  // Only non-legal VSELECTs reach this lowering, convert those into generic
  // shuffles and re-use the shuffle lowering path for blends.
  SmallVector<int, 32> Mask;
  for (int i = 0, Size = VT.getVectorNumElements(); i < Size; ++i) {
    SDValue CondElt = CondBV->getOperand(i);
    Mask.push_back(
        isa<ConstantSDNode>(CondElt) ? i + (isNullConstant(CondElt) ? Size : 0)
                                     : -1);
  }
  return DAG.getVectorShuffle(VT, dl, LHS, RHS, Mask);
}

SDValue X86TargetLowering::LowerVSELECT(SDValue Op, SelectionDAG &DAG) const {
  // A vselect where all conditions and data are constants can be optimized into
  // a single vector load by SelectionDAGLegalize::ExpandBUILD_VECTOR().
  if (ISD::isBuildVectorOfConstantSDNodes(Op.getOperand(0).getNode()) &&
      ISD::isBuildVectorOfConstantSDNodes(Op.getOperand(1).getNode()) &&
      ISD::isBuildVectorOfConstantSDNodes(Op.getOperand(2).getNode()))
    return SDValue();

  // Try to lower this to a blend-style vector shuffle. This can handle all
  // constant condition cases.
  if (SDValue BlendOp = lowerVSELECTtoVectorShuffle(Op, Subtarget, DAG))
    return BlendOp;

  // If this VSELECT has a vector if i1 as a mask, it will be directly matched
  // with patterns on the mask registers on AVX-512.
  if (Op->getOperand(0).getValueType().getScalarSizeInBits() == 1)
    return Op;

  // Variable blends are only legal from SSE4.1 onward.
  if (!Subtarget.hasSSE41())
    return SDValue();

  SDLoc dl(Op);
  MVT VT = Op.getSimpleValueType();

  // If the VSELECT is on a 512-bit type, we have to convert a non-i1 condition
  // into an i1 condition so that we can use the mask-based 512-bit blend
  // instructions.
  if (VT.getSizeInBits() == 512) {
    SDValue Cond = Op.getOperand(0);
    // The vNi1 condition case should be handled above as it can be trivially
    // lowered.
    assert(Cond.getValueType().getScalarSizeInBits() ==
               VT.getScalarSizeInBits() &&
           "Should have a size-matched integer condition!");
    // Build a mask by testing the condition against itself (tests for zero).
    MVT MaskVT = MVT::getVectorVT(MVT::i1, VT.getVectorNumElements());
    SDValue Mask = DAG.getNode(X86ISD::TESTM, dl, MaskVT, Cond, Cond);
    // Now return a new VSELECT using the mask.
    return DAG.getSelect(dl, VT, Mask, Op.getOperand(1), Op.getOperand(2));
  }

  // Only some types will be legal on some subtargets. If we can emit a legal
  // VSELECT-matching blend, return Op, and but if we need to expand, return
  // a null value.
  switch (VT.SimpleTy) {
  default:
    // Most of the vector types have blends past SSE4.1.
    return Op;

  case MVT::v32i8:
    // The byte blends for AVX vectors were introduced only in AVX2.
    if (Subtarget.hasAVX2())
      return Op;

    return SDValue();

  case MVT::v8i16:
  case MVT::v16i16:
    // FIXME: We should custom lower this by fixing the condition and using i8
    // blends.
    return SDValue();
  }
}

static SDValue LowerEXTRACT_VECTOR_ELT_SSE4(SDValue Op, SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();
  SDLoc dl(Op);

  if (!Op.getOperand(0).getSimpleValueType().is128BitVector())
    return SDValue();

  if (VT.getSizeInBits() == 8) {
    SDValue Extract = DAG.getNode(X86ISD::PEXTRB, dl, MVT::i32,
                                  Op.getOperand(0), Op.getOperand(1));
    return DAG.getNode(ISD::TRUNCATE, dl, VT, Extract);
  }

  if (VT == MVT::f32) {
    // EXTRACTPS outputs to a GPR32 register which will require a movd to copy
    // the result back to FR32 register. It's only worth matching if the
    // result has a single use which is a store or a bitcast to i32.  And in
    // the case of a store, it's not worth it if the index is a constant 0,
    // because a MOVSSmr can be used instead, which is smaller and faster.
    if (!Op.hasOneUse())
      return SDValue();
    SDNode *User = *Op.getNode()->use_begin();
    if ((User->getOpcode() != ISD::STORE ||
         isNullConstant(Op.getOperand(1))) &&
        (User->getOpcode() != ISD::BITCAST ||
         User->getValueType(0) != MVT::i32))
      return SDValue();
    SDValue Extract = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, MVT::i32,
                                  DAG.getBitcast(MVT::v4i32, Op.getOperand(0)),
                                  Op.getOperand(1));
    return DAG.getBitcast(MVT::f32, Extract);
  }

  if (VT == MVT::i32 || VT == MVT::i64) {
    // ExtractPS/pextrq works with constant index.
    if (isa<ConstantSDNode>(Op.getOperand(1)))
      return Op;
  }

  return SDValue();
}

/// Extract one bit from mask vector, like v16i1 or v8i1.
/// AVX-512 feature.
SDValue
X86TargetLowering::ExtractBitFromMaskVector(SDValue Op, SelectionDAG &DAG) const {
  SDValue Vec = Op.getOperand(0);
  SDLoc dl(Vec);
  MVT VecVT = Vec.getSimpleValueType();
  SDValue Idx = Op.getOperand(1);
  MVT EltVT = Op.getSimpleValueType();

  assert((VecVT.getVectorNumElements() <= 16 || Subtarget.hasBWI()) &&
         "Unexpected vector type in ExtractBitFromMaskVector");

  // variable index can't be handled in mask registers,
  // extend vector to VR512/128
  if (!isa<ConstantSDNode>(Idx)) {
    unsigned NumElts = VecVT.getVectorNumElements();
    // Extending v8i1/v16i1 to 512-bit get better performance on KNL
    // than extending to 128/256bit.
    unsigned VecSize = (NumElts <= 4 ? 128 : 512);
    MVT ExtVT = MVT::getVectorVT(MVT::getIntegerVT(VecSize/NumElts), NumElts);
    SDValue Ext = DAG.getNode(ISD::SIGN_EXTEND, dl, ExtVT, Vec);
    SDValue Elt = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl,
                              ExtVT.getVectorElementType(), Ext, Idx);
    return DAG.getNode(ISD::TRUNCATE, dl, EltVT, Elt);
  }

  unsigned IdxVal = cast<ConstantSDNode>(Idx)->getZExtValue();
  if ((!Subtarget.hasDQI() && (VecVT.getVectorNumElements() == 8)) ||
      (VecVT.getVectorNumElements() < 8)) {
    // Use kshiftlw/rw instruction.
    VecVT = MVT::v16i1;
    Vec = DAG.getNode(ISD::INSERT_SUBVECTOR, dl, VecVT,
                      DAG.getUNDEF(VecVT),
                      Vec,
                      DAG.getIntPtrConstant(0, dl));
  }
  unsigned MaxSift = VecVT.getVectorNumElements() - 1;
  if (MaxSift - IdxVal)
    Vec = DAG.getNode(X86ISD::KSHIFTL, dl, VecVT, Vec,
                      DAG.getConstant(MaxSift - IdxVal, dl, MVT::i8));
  Vec = DAG.getNode(X86ISD::KSHIFTR, dl, VecVT, Vec,
                    DAG.getConstant(MaxSift, dl, MVT::i8));
  return DAG.getNode(X86ISD::VEXTRACT, dl, Op.getSimpleValueType(), Vec,
                     DAG.getIntPtrConstant(0, dl));
}

SDValue
X86TargetLowering::LowerEXTRACT_VECTOR_ELT(SDValue Op,
                                           SelectionDAG &DAG) const {
  SDLoc dl(Op);
  SDValue Vec = Op.getOperand(0);
  MVT VecVT = Vec.getSimpleValueType();
  SDValue Idx = Op.getOperand(1);

  if (VecVT.getVectorElementType() == MVT::i1)
    return ExtractBitFromMaskVector(Op, DAG);

  if (!isa<ConstantSDNode>(Idx)) {
    // Its more profitable to go through memory (1 cycles throughput)
    // than using VMOVD + VPERMV/PSHUFB sequence ( 2/3 cycles throughput)
    // IACA tool was used to get performance estimation
    // (https://software.intel.com/en-us/articles/intel-architecture-code-analyzer)
    //
    // example : extractelement <16 x i8> %a, i32 %i
    //
    // Block Throughput: 3.00 Cycles
    // Throughput Bottleneck: Port5
    //
    // | Num Of |   Ports pressure in cycles  |    |
    // |  Uops  |  0  - DV  |  5  |  6  |  7  |    |
    // ---------------------------------------------
    // |   1    |           | 1.0 |     |     | CP | vmovd xmm1, edi
    // |   1    |           | 1.0 |     |     | CP | vpshufb xmm0, xmm0, xmm1
    // |   2    | 1.0       | 1.0 |     |     | CP | vpextrb eax, xmm0, 0x0
    // Total Num Of Uops: 4
    //
    //
    // Block Throughput: 1.00 Cycles
    // Throughput Bottleneck: PORT2_AGU, PORT3_AGU, Port4
    //
    // |    |  Ports pressure in cycles   |  |
    // |Uops| 1 | 2 - D  |3 -  D  | 4 | 5 |  |
    // ---------------------------------------------------------
    // |2^  |   | 0.5    | 0.5    |1.0|   |CP| vmovaps xmmword ptr [rsp-0x18], xmm0
    // |1   |0.5|        |        |   |0.5|  | lea rax, ptr [rsp-0x18]
    // |1   |   |0.5, 0.5|0.5, 0.5|   |   |CP| mov al, byte ptr [rdi+rax*1]
    // Total Num Of Uops: 4

    return SDValue();
  }

  unsigned IdxVal = cast<ConstantSDNode>(Idx)->getZExtValue();

  // If this is a 256-bit vector result, first extract the 128-bit vector and
  // then extract the element from the 128-bit vector.
  if (VecVT.is256BitVector() || VecVT.is512BitVector()) {
    // Get the 128-bit vector.
    Vec = extract128BitVector(Vec, IdxVal, DAG, dl);
    MVT EltVT = VecVT.getVectorElementType();

    unsigned ElemsPerChunk = 128 / EltVT.getSizeInBits();
    assert(isPowerOf2_32(ElemsPerChunk) && "Elements per chunk not power of 2");

    // Find IdxVal modulo ElemsPerChunk. Since ElemsPerChunk is a power of 2
    // this can be done with a mask.
    IdxVal &= ElemsPerChunk - 1;
    return DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, Op.getValueType(), Vec,
                       DAG.getConstant(IdxVal, dl, MVT::i32));
  }

  assert(VecVT.is128BitVector() && "Unexpected vector length");

  MVT VT = Op.getSimpleValueType();

  if (VT.getSizeInBits() == 16) {
    // If IdxVal is 0, it's cheaper to do a move instead of a pextrw, unless
    // we're going to zero extend the register or fold the store (SSE41 only).
    if (IdxVal == 0 && !MayFoldIntoZeroExtend(Op) &&
        !(Subtarget.hasSSE41() && MayFoldIntoStore(Op)))
      return DAG.getNode(ISD::TRUNCATE, dl, MVT::i16,
                         DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, MVT::i32,
                                     DAG.getBitcast(MVT::v4i32, Vec), Idx));

    // Transform it so it match pextrw which produces a 32-bit result.
    SDValue Extract = DAG.getNode(X86ISD::PEXTRW, dl, MVT::i32,
                                  Op.getOperand(0), Op.getOperand(1));
    return DAG.getNode(ISD::TRUNCATE, dl, VT, Extract);
  }

  if (Subtarget.hasSSE41())
    if (SDValue Res = LowerEXTRACT_VECTOR_ELT_SSE4(Op, DAG))
      return Res;

  // TODO: We only extract a single element from v16i8, we can probably afford
  // to be more aggressive here before using the default approach of spilling to
  // stack.
  if (VT.getSizeInBits() == 8 && Op->isOnlyUserOf(Vec.getNode())) {
    // Extract either the lowest i32 or any i16, and extract the sub-byte.
    int DWordIdx = IdxVal / 4;
    if (DWordIdx == 0) {
      SDValue Res = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, MVT::i32,
                                DAG.getBitcast(MVT::v4i32, Vec),
                                DAG.getIntPtrConstant(DWordIdx, dl));
      int ShiftVal = (IdxVal % 4) * 8;
      if (ShiftVal != 0)
        Res = DAG.getNode(ISD::SRL, dl, MVT::i32, Res,
                          DAG.getConstant(ShiftVal, dl, MVT::i32));
      return DAG.getNode(ISD::TRUNCATE, dl, VT, Res);
    }

    int WordIdx = IdxVal / 2;
    SDValue Res = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, MVT::i16,
                              DAG.getBitcast(MVT::v8i16, Vec),
                              DAG.getIntPtrConstant(WordIdx, dl));
    int ShiftVal = (IdxVal % 2) * 8;
    if (ShiftVal != 0)
      Res = DAG.getNode(ISD::SRL, dl, MVT::i16, Res,
                        DAG.getConstant(ShiftVal, dl, MVT::i16));
    return DAG.getNode(ISD::TRUNCATE, dl, VT, Res);
  }

  if (VT.getSizeInBits() == 32) {
    if (IdxVal == 0)
      return Op;

    // SHUFPS the element to the lowest double word, then movss.
    int Mask[4] = { static_cast<int>(IdxVal), -1, -1, -1 };
    Vec = DAG.getVectorShuffle(VecVT, dl, Vec, DAG.getUNDEF(VecVT), Mask);
    return DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, VT, Vec,
                       DAG.getIntPtrConstant(0, dl));
  }

  if (VT.getSizeInBits() == 64) {
    // FIXME: .td only matches this for <2 x f64>, not <2 x i64> on 32b
    // FIXME: seems like this should be unnecessary if mov{h,l}pd were taught
    //        to match extract_elt for f64.
    if (IdxVal == 0)
      return Op;

    // UNPCKHPD the element to the lowest double word, then movsd.
    // Note if the lower 64 bits of the result of the UNPCKHPD is then stored
    // to a f64mem, the whole operation is folded into a single MOVHPDmr.
    int Mask[2] = { 1, -1 };
    Vec = DAG.getVectorShuffle(VecVT, dl, Vec, DAG.getUNDEF(VecVT), Mask);
    return DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, VT, Vec,
                       DAG.getIntPtrConstant(0, dl));
  }

  return SDValue();
}

/// Insert one bit to mask vector, like v16i1 or v8i1.
/// AVX-512 feature.
SDValue
X86TargetLowering::InsertBitToMaskVector(SDValue Op, SelectionDAG &DAG) const {
  SDLoc dl(Op);
  SDValue Vec = Op.getOperand(0);
  SDValue Elt = Op.getOperand(1);
  SDValue Idx = Op.getOperand(2);
  MVT VecVT = Vec.getSimpleValueType();

  if (!isa<ConstantSDNode>(Idx)) {
    // Non constant index. Extend source and destination,
    // insert element and then truncate the result.
    MVT ExtVecVT = (VecVT == MVT::v8i1 ?  MVT::v8i64 : MVT::v16i32);
    MVT ExtEltVT = (VecVT == MVT::v8i1 ?  MVT::i64 : MVT::i32);
    SDValue ExtOp = DAG.getNode(ISD::INSERT_VECTOR_ELT, dl, ExtVecVT,
      DAG.getNode(ISD::ZERO_EXTEND, dl, ExtVecVT, Vec),
      DAG.getNode(ISD::ZERO_EXTEND, dl, ExtEltVT, Elt), Idx);
    return DAG.getNode(ISD::TRUNCATE, dl, VecVT, ExtOp);
  }

  unsigned IdxVal = cast<ConstantSDNode>(Idx)->getZExtValue();
  SDValue EltInVec = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VecVT, Elt);
  unsigned NumElems = VecVT.getVectorNumElements();

  if(Vec.isUndef()) {
    if (IdxVal)
      EltInVec = DAG.getNode(X86ISD::KSHIFTL, dl, VecVT, EltInVec,
                             DAG.getConstant(IdxVal, dl, MVT::i8));
    return EltInVec;
  }

  // Insertion of one bit into first position
  if (IdxVal == 0 ) {
    // Clean top bits of vector.
    EltInVec = DAG.getNode(X86ISD::KSHIFTL, dl, VecVT, EltInVec,
                           DAG.getConstant(NumElems - 1, dl, MVT::i8));
    EltInVec = DAG.getNode(X86ISD::KSHIFTR, dl, VecVT, EltInVec,
                           DAG.getConstant(NumElems - 1, dl, MVT::i8));
    // Clean the first bit in source vector.
    Vec = DAG.getNode(X86ISD::KSHIFTR, dl, VecVT, Vec,
                      DAG.getConstant(1 , dl, MVT::i8));
    Vec = DAG.getNode(X86ISD::KSHIFTL, dl, VecVT, Vec,
                      DAG.getConstant(1, dl, MVT::i8));

    return DAG.getNode(ISD::OR, dl, VecVT, Vec, EltInVec);
  }
  // Insertion of one bit into last position
  if (IdxVal == NumElems -1) {
    // Move the bit to the last position inside the vector.
    EltInVec = DAG.getNode(X86ISD::KSHIFTL, dl, VecVT, EltInVec,
                           DAG.getConstant(IdxVal, dl, MVT::i8));
    // Clean the last bit in the source vector.
    Vec = DAG.getNode(X86ISD::KSHIFTL, dl, VecVT, Vec,
                           DAG.getConstant(1, dl, MVT::i8));
    Vec = DAG.getNode(X86ISD::KSHIFTR, dl, VecVT, Vec,
                           DAG.getConstant(1 , dl, MVT::i8));

    return DAG.getNode(ISD::OR, dl, VecVT, Vec, EltInVec);
  }

  // Use shuffle to insert element.
  SmallVector<int, 64> MaskVec(NumElems);
  for (unsigned i = 0; i != NumElems; ++i)
    MaskVec[i] = (i == IdxVal) ? NumElems : i;

  return DAG.getVectorShuffle(VecVT, dl, Vec, EltInVec, MaskVec);
}

SDValue X86TargetLowering::LowerINSERT_VECTOR_ELT(SDValue Op,
                                                  SelectionDAG &DAG) const {
  MVT VT = Op.getSimpleValueType();
  MVT EltVT = VT.getVectorElementType();
  unsigned NumElts = VT.getVectorNumElements();

  if (EltVT == MVT::i1)
    return InsertBitToMaskVector(Op, DAG);

  SDLoc dl(Op);
  SDValue N0 = Op.getOperand(0);
  SDValue N1 = Op.getOperand(1);
  SDValue N2 = Op.getOperand(2);
  if (!isa<ConstantSDNode>(N2))
    return SDValue();
  auto *N2C = cast<ConstantSDNode>(N2);
  unsigned IdxVal = N2C->getZExtValue();

  bool IsZeroElt = X86::isZeroNode(N1);
  bool IsAllOnesElt = VT.isInteger() && llvm::isAllOnesConstant(N1);

  // If we are inserting a element, see if we can do this more efficiently with
  // a blend shuffle with a rematerializable vector than a costly integer
  // insertion.
  if ((IsZeroElt || IsAllOnesElt) && Subtarget.hasSSE41() &&
      16 <= EltVT.getSizeInBits()) {
    SmallVector<int, 8> BlendMask;
    for (unsigned i = 0; i != NumElts; ++i)
      BlendMask.push_back(i == IdxVal ? i + NumElts : i);
    SDValue CstVector = IsZeroElt ? getZeroVector(VT, Subtarget, DAG, dl)
                                  : getOnesVector(VT, DAG, dl);
    return DAG.getVectorShuffle(VT, dl, N0, CstVector, BlendMask);
  }

  // If the vector is wider than 128 bits, extract the 128-bit subvector, insert
  // into that, and then insert the subvector back into the result.
  if (VT.is256BitVector() || VT.is512BitVector()) {
    // With a 256-bit vector, we can insert into the zero element efficiently
    // using a blend if we have AVX or AVX2 and the right data type.
    if (VT.is256BitVector() && IdxVal == 0) {
      // TODO: It is worthwhile to cast integer to floating point and back
      // and incur a domain crossing penalty if that's what we'll end up
      // doing anyway after extracting to a 128-bit vector.
      if ((Subtarget.hasAVX() && (EltVT == MVT::f64 || EltVT == MVT::f32)) ||
          (Subtarget.hasAVX2() && EltVT == MVT::i32)) {
        SDValue N1Vec = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VT, N1);
        N2 = DAG.getIntPtrConstant(1, dl);
        return DAG.getNode(X86ISD::BLENDI, dl, VT, N0, N1Vec, N2);
      }
    }

    // Get the desired 128-bit vector chunk.
    SDValue V = extract128BitVector(N0, IdxVal, DAG, dl);

    // Insert the element into the desired chunk.
    unsigned NumEltsIn128 = 128 / EltVT.getSizeInBits();
    assert(isPowerOf2_32(NumEltsIn128));
    // Since NumEltsIn128 is a power of 2 we can use mask instead of modulo.
    unsigned IdxIn128 = IdxVal & (NumEltsIn128 - 1);

    V = DAG.getNode(ISD::INSERT_VECTOR_ELT, dl, V.getValueType(), V, N1,
                    DAG.getConstant(IdxIn128, dl, MVT::i32));

    // Insert the changed part back into the bigger vector
    return insert128BitVector(N0, V, IdxVal, DAG, dl);
  }
  assert(VT.is128BitVector() && "Only 128-bit vector types should be left!");

  // Transform it so it match pinsr{b,w} which expects a GR32 as its second
  // argument. SSE41 required for pinsrb.
  if (VT == MVT::v8i16 || (VT == MVT::v16i8 && Subtarget.hasSSE41())) {
    unsigned Opc;
    if (VT == MVT::v8i16) {
      assert(Subtarget.hasSSE2() && "SSE2 required for PINSRW");
      Opc = X86ISD::PINSRW;
    } else {
      assert(VT == MVT::v16i8 && "PINSRB requires v16i8 vector");
      assert(Subtarget.hasSSE41() && "SSE41 required for PINSRB");
      Opc = X86ISD::PINSRB;
    }

    if (N1.getValueType() != MVT::i32)
      N1 = DAG.getNode(ISD::ANY_EXTEND, dl, MVT::i32, N1);
    if (N2.getValueType() != MVT::i32)
      N2 = DAG.getIntPtrConstant(IdxVal, dl);
    return DAG.getNode(Opc, dl, VT, N0, N1, N2);
  }

  if (Subtarget.hasSSE41()) {
    if (EltVT == MVT::f32) {
      // Bits [7:6] of the constant are the source select. This will always be
      //   zero here. The DAG Combiner may combine an extract_elt index into
      //   these bits. For example (insert (extract, 3), 2) could be matched by
      //   putting the '3' into bits [7:6] of X86ISD::INSERTPS.
      // Bits [5:4] of the constant are the destination select. This is the
      //   value of the incoming immediate.
      // Bits [3:0] of the constant are the zero mask. The DAG Combiner may
      //   combine either bitwise AND or insert of float 0.0 to set these bits.

      bool MinSize = DAG.getMachineFunction().getFunction()->optForMinSize();
      if (IdxVal == 0 && (!MinSize || !MayFoldLoad(N1))) {
        // If this is an insertion of 32-bits into the low 32-bits of
        // a vector, we prefer to generate a blend with immediate rather
        // than an insertps. Blends are simpler operations in hardware and so
        // will always have equal or better performance than insertps.
        // But if optimizing for size and there's a load folding opportunity,
        // generate insertps because blendps does not have a 32-bit memory
        // operand form.
        N2 = DAG.getIntPtrConstant(1, dl);
        N1 = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, MVT::v4f32, N1);
        return DAG.getNode(X86ISD::BLENDI, dl, VT, N0, N1, N2);
      }
      N2 = DAG.getIntPtrConstant(IdxVal << 4, dl);
      // Create this as a scalar to vector..
      N1 = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, MVT::v4f32, N1);
      return DAG.getNode(X86ISD::INSERTPS, dl, VT, N0, N1, N2);
    }

    // PINSR* works with constant index.
    if (EltVT == MVT::i32 || EltVT == MVT::i64)
      return Op;
  }

  return SDValue();
}

static SDValue LowerSCALAR_TO_VECTOR(SDValue Op, const X86Subtarget &Subtarget,
                                     SelectionDAG &DAG) {
  SDLoc dl(Op);
  MVT OpVT = Op.getSimpleValueType();

  // It's always cheaper to replace a xor+movd with xorps and simplifies further
  // combines.
  if (X86::isZeroNode(Op.getOperand(0)))
    return getZeroVector(OpVT, Subtarget, DAG, dl);

  // If this is a 256-bit vector result, first insert into a 128-bit
  // vector and then insert into the 256-bit vector.
  if (!OpVT.is128BitVector()) {
    // Insert into a 128-bit vector.
    unsigned SizeFactor = OpVT.getSizeInBits() / 128;
    MVT VT128 = MVT::getVectorVT(OpVT.getVectorElementType(),
                                 OpVT.getVectorNumElements() / SizeFactor);

    Op = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VT128, Op.getOperand(0));

    // Insert the 128-bit vector.
    return insert128BitVector(DAG.getUNDEF(OpVT), Op, 0, DAG, dl);
  }
  assert(OpVT.is128BitVector() && "Expected an SSE type!");

  // Pass through a v4i32 SCALAR_TO_VECTOR as that's what we use in tblgen.
  if (OpVT == MVT::v4i32)
    return Op;

  SDValue AnyExt = DAG.getNode(ISD::ANY_EXTEND, dl, MVT::i32, Op.getOperand(0));
  return DAG.getBitcast(
      OpVT, DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, MVT::v4i32, AnyExt));
}

// Lower a node with an INSERT_SUBVECTOR opcode.  This may result in a
// simple superregister reference or explicit instructions to insert
// the upper bits of a vector.
static SDValue LowerINSERT_SUBVECTOR(SDValue Op, const X86Subtarget &Subtarget,
                                     SelectionDAG &DAG) {
  assert(Op.getSimpleValueType().getVectorElementType() == MVT::i1);

  return insert1BitVector(Op, DAG, Subtarget);
}

// Returns the appropriate wrapper opcode for a global reference.
unsigned X86TargetLowering::getGlobalWrapperKind(const GlobalValue *GV) const {
  // References to absolute symbols are never PC-relative.
  if (GV && GV->isAbsoluteSymbolRef())
    return X86ISD::Wrapper;

  CodeModel::Model M = getTargetMachine().getCodeModel();
  if (Subtarget.isPICStyleRIPRel() &&
      (M == CodeModel::Small || M == CodeModel::Kernel))
    return X86ISD::WrapperRIP;

  return X86ISD::Wrapper;
}

// ConstantPool, JumpTable, GlobalAddress, and ExternalSymbol are lowered as
// their target counterpart wrapped in the X86ISD::Wrapper node. Suppose N is
// one of the above mentioned nodes. It has to be wrapped because otherwise
// Select(N) returns N. So the raw TargetGlobalAddress nodes, etc. can only
// be used to form addressing mode. These wrapped nodes will be selected
// into MOV32ri.
SDValue
X86TargetLowering::LowerConstantPool(SDValue Op, SelectionDAG &DAG) const {
  ConstantPoolSDNode *CP = cast<ConstantPoolSDNode>(Op);

  // In PIC mode (unless we're in RIPRel PIC mode) we add an offset to the
  // global base reg.
  unsigned char OpFlag = Subtarget.classifyLocalReference(nullptr);

  auto PtrVT = getPointerTy(DAG.getDataLayout());
  SDValue Result = DAG.getTargetConstantPool(
      CP->getConstVal(), PtrVT, CP->getAlignment(), CP->getOffset(), OpFlag);
  SDLoc DL(CP);
  Result = DAG.getNode(getGlobalWrapperKind(), DL, PtrVT, Result);
  // With PIC, the address is actually $g + Offset.
  if (OpFlag) {
    Result =
        DAG.getNode(ISD::ADD, DL, PtrVT,
                    DAG.getNode(X86ISD::GlobalBaseReg, SDLoc(), PtrVT), Result);
  }

  return Result;
}

SDValue X86TargetLowering::LowerJumpTable(SDValue Op, SelectionDAG &DAG) const {
  JumpTableSDNode *JT = cast<JumpTableSDNode>(Op);

  // In PIC mode (unless we're in RIPRel PIC mode) we add an offset to the
  // global base reg.
  unsigned char OpFlag = Subtarget.classifyLocalReference(nullptr);

  auto PtrVT = getPointerTy(DAG.getDataLayout());
  SDValue Result = DAG.getTargetJumpTable(JT->getIndex(), PtrVT, OpFlag);
  SDLoc DL(JT);
  Result = DAG.getNode(getGlobalWrapperKind(), DL, PtrVT, Result);

  // With PIC, the address is actually $g + Offset.
  if (OpFlag)
    Result =
        DAG.getNode(ISD::ADD, DL, PtrVT,
                    DAG.getNode(X86ISD::GlobalBaseReg, SDLoc(), PtrVT), Result);

  return Result;
}

SDValue
X86TargetLowering::LowerExternalSymbol(SDValue Op, SelectionDAG &DAG) const {
  const char *Sym = cast<ExternalSymbolSDNode>(Op)->getSymbol();

  // In PIC mode (unless we're in RIPRel PIC mode) we add an offset to the
  // global base reg.
  const Module *Mod = DAG.getMachineFunction().getFunction()->getParent();
  unsigned char OpFlag = Subtarget.classifyGlobalReference(nullptr, *Mod);

  auto PtrVT = getPointerTy(DAG.getDataLayout());
  SDValue Result = DAG.getTargetExternalSymbol(Sym, PtrVT, OpFlag);

  SDLoc DL(Op);
  Result = DAG.getNode(getGlobalWrapperKind(), DL, PtrVT, Result);

  // With PIC, the address is actually $g + Offset.
  if (isPositionIndependent() && !Subtarget.is64Bit()) {
    Result =
        DAG.getNode(ISD::ADD, DL, PtrVT,
                    DAG.getNode(X86ISD::GlobalBaseReg, SDLoc(), PtrVT), Result);
  }

  // For symbols that require a load from a stub to get the address, emit the
  // load.
  if (isGlobalStubReference(OpFlag))
    Result = DAG.getLoad(PtrVT, DL, DAG.getEntryNode(), Result,
                         MachinePointerInfo::getGOT(DAG.getMachineFunction()));

  return Result;
}

SDValue
X86TargetLowering::LowerBlockAddress(SDValue Op, SelectionDAG &DAG) const {
  // Create the TargetBlockAddressAddress node.
  unsigned char OpFlags =
    Subtarget.classifyBlockAddressReference();
  const BlockAddress *BA = cast<BlockAddressSDNode>(Op)->getBlockAddress();
  int64_t Offset = cast<BlockAddressSDNode>(Op)->getOffset();
  SDLoc dl(Op);
  auto PtrVT = getPointerTy(DAG.getDataLayout());
  SDValue Result = DAG.getTargetBlockAddress(BA, PtrVT, Offset, OpFlags);
  Result = DAG.getNode(getGlobalWrapperKind(), dl, PtrVT, Result);

  // With PIC, the address is actually $g + Offset.
  if (isGlobalRelativeToPICBase(OpFlags)) {
    Result = DAG.getNode(ISD::ADD, dl, PtrVT,
                         DAG.getNode(X86ISD::GlobalBaseReg, dl, PtrVT), Result);
  }

  return Result;
}

SDValue X86TargetLowering::LowerGlobalAddress(const GlobalValue *GV,
                                              const SDLoc &dl, int64_t Offset,
                                              SelectionDAG &DAG) const {
  // Create the TargetGlobalAddress node, folding in the constant
  // offset if it is legal.
  unsigned char OpFlags = Subtarget.classifyGlobalReference(GV);
  CodeModel::Model M = DAG.getTarget().getCodeModel();
  auto PtrVT = getPointerTy(DAG.getDataLayout());
  SDValue Result;
  if (OpFlags == X86II::MO_NO_FLAG &&
      X86::isOffsetSuitableForCodeModel(Offset, M)) {
    // A direct static reference to a global.
    Result = DAG.getTargetGlobalAddress(GV, dl, PtrVT, Offset);
    Offset = 0;
  } else {
    Result = DAG.getTargetGlobalAddress(GV, dl, PtrVT, 0, OpFlags);
  }

  Result = DAG.getNode(getGlobalWrapperKind(GV), dl, PtrVT, Result);

  // With PIC, the address is actually $g + Offset.
  if (isGlobalRelativeToPICBase(OpFlags)) {
    Result = DAG.getNode(ISD::ADD, dl, PtrVT,
                         DAG.getNode(X86ISD::GlobalBaseReg, dl, PtrVT), Result);
  }

  // For globals that require a load from a stub to get the address, emit the
  // load.
  if (isGlobalStubReference(OpFlags))
    Result = DAG.getLoad(PtrVT, dl, DAG.getEntryNode(), Result,
                         MachinePointerInfo::getGOT(DAG.getMachineFunction()));

  // If there was a non-zero offset that we didn't fold, create an explicit
  // addition for it.
  if (Offset != 0)
    Result = DAG.getNode(ISD::ADD, dl, PtrVT, Result,
                         DAG.getConstant(Offset, dl, PtrVT));

  return Result;
}

SDValue
X86TargetLowering::LowerGlobalAddress(SDValue Op, SelectionDAG &DAG) const {
  const GlobalValue *GV = cast<GlobalAddressSDNode>(Op)->getGlobal();
  int64_t Offset = cast<GlobalAddressSDNode>(Op)->getOffset();
  return LowerGlobalAddress(GV, SDLoc(Op), Offset, DAG);
}

static SDValue
GetTLSADDR(SelectionDAG &DAG, SDValue Chain, GlobalAddressSDNode *GA,
           SDValue *InFlag, const EVT PtrVT, unsigned ReturnReg,
           unsigned char OperandFlags, bool LocalDynamic = false) {
  MachineFrameInfo &MFI = DAG.getMachineFunction().getFrameInfo();
  SDVTList NodeTys = DAG.getVTList(MVT::Other, MVT::Glue);
  SDLoc dl(GA);
  SDValue TGA = DAG.getTargetGlobalAddress(GA->getGlobal(), dl,
                                           GA->getValueType(0),
                                           GA->getOffset(),
                                           OperandFlags);

  X86ISD::NodeType CallType = LocalDynamic ? X86ISD::TLSBASEADDR
                                           : X86ISD::TLSADDR;

  if (InFlag) {
    SDValue Ops[] = { Chain,  TGA, *InFlag };
    Chain = DAG.getNode(CallType, dl, NodeTys, Ops);
  } else {
    SDValue Ops[]  = { Chain, TGA };
    Chain = DAG.getNode(CallType, dl, NodeTys, Ops);
  }

  // TLSADDR will be codegen'ed as call. Inform MFI that function has calls.
  MFI.setAdjustsStack(true);
  MFI.setHasCalls(true);

  SDValue Flag = Chain.getValue(1);
  return DAG.getCopyFromReg(Chain, dl, ReturnReg, PtrVT, Flag);
}

// Lower ISD::GlobalTLSAddress using the "general dynamic" model, 32 bit
static SDValue
LowerToTLSGeneralDynamicModel32(GlobalAddressSDNode *GA, SelectionDAG &DAG,
                                const EVT PtrVT) {
  SDValue InFlag;
  SDLoc dl(GA);  // ? function entry point might be better
  SDValue Chain = DAG.getCopyToReg(DAG.getEntryNode(), dl, X86::EBX,
                                   DAG.getNode(X86ISD::GlobalBaseReg,
                                               SDLoc(), PtrVT), InFlag);
  InFlag = Chain.getValue(1);

  return GetTLSADDR(DAG, Chain, GA, &InFlag, PtrVT, X86::EAX, X86II::MO_TLSGD);
}

// Lower ISD::GlobalTLSAddress using the "general dynamic" model, 64 bit
static SDValue
LowerToTLSGeneralDynamicModel64(GlobalAddressSDNode *GA, SelectionDAG &DAG,
                                const EVT PtrVT) {
  return GetTLSADDR(DAG, DAG.getEntryNode(), GA, nullptr, PtrVT,
                    X86::RAX, X86II::MO_TLSGD);
}

static SDValue LowerToTLSLocalDynamicModel(GlobalAddressSDNode *GA,
                                           SelectionDAG &DAG,
                                           const EVT PtrVT,
                                           bool is64Bit) {
  SDLoc dl(GA);

  // Get the start address of the TLS block for this module.
  X86MachineFunctionInfo *MFI = DAG.getMachineFunction()
      .getInfo<X86MachineFunctionInfo>();
  MFI->incNumLocalDynamicTLSAccesses();

  SDValue Base;
  if (is64Bit) {
    Base = GetTLSADDR(DAG, DAG.getEntryNode(), GA, nullptr, PtrVT, X86::RAX,
                      X86II::MO_TLSLD, /*LocalDynamic=*/true);
  } else {
    SDValue InFlag;
    SDValue Chain = DAG.getCopyToReg(DAG.getEntryNode(), dl, X86::EBX,
        DAG.getNode(X86ISD::GlobalBaseReg, SDLoc(), PtrVT), InFlag);
    InFlag = Chain.getValue(1);
    Base = GetTLSADDR(DAG, Chain, GA, &InFlag, PtrVT, X86::EAX,
                      X86II::MO_TLSLDM, /*LocalDynamic=*/true);
  }

  // Note: the CleanupLocalDynamicTLSPass will remove redundant computations
  // of Base.

  // Build x@dtpoff.
  unsigned char OperandFlags = X86II::MO_DTPOFF;
  unsigned WrapperKind = X86ISD::Wrapper;
  SDValue TGA = DAG.getTargetGlobalAddress(GA->getGlobal(), dl,
                                           GA->getValueType(0),
                                           GA->getOffset(), OperandFlags);
  SDValue Offset = DAG.getNode(WrapperKind, dl, PtrVT, TGA);

  // Add x@dtpoff with the base.
  return DAG.getNode(ISD::ADD, dl, PtrVT, Offset, Base);
}

// Lower ISD::GlobalTLSAddress using the "initial exec" or "local exec" model.
static SDValue LowerToTLSExecModel(GlobalAddressSDNode *GA, SelectionDAG &DAG,
                                   const EVT PtrVT, TLSModel::Model model,
                                   bool is64Bit, bool isPIC) {
  SDLoc dl(GA);

  // Get the Thread Pointer, which is %gs:0 (32-bit) or %fs:0 (64-bit).
  Value *Ptr = Constant::getNullValue(Type::getInt8PtrTy(*DAG.getContext(),
                                                         is64Bit ? 257 : 256));

  SDValue ThreadPointer =
      DAG.getLoad(PtrVT, dl, DAG.getEntryNode(), DAG.getIntPtrConstant(0, dl),
                  MachinePointerInfo(Ptr));

  unsigned char OperandFlags = 0;
  // Most TLS accesses are not RIP relative, even on x86-64.  One exception is
  // initialexec.
  unsigned WrapperKind = X86ISD::Wrapper;
  if (model == TLSModel::LocalExec) {
    OperandFlags = is64Bit ? X86II::MO_TPOFF : X86II::MO_NTPOFF;
  } else if (model == TLSModel::InitialExec) {
    if (is64Bit) {
      OperandFlags = X86II::MO_GOTTPOFF;
      WrapperKind = X86ISD::WrapperRIP;
    } else {
      OperandFlags = isPIC ? X86II::MO_GOTNTPOFF : X86II::MO_INDNTPOFF;
    }
  } else {
    llvm_unreachable("Unexpected model");
  }

  // emit "addl x@ntpoff,%eax" (local exec)
  // or "addl x@indntpoff,%eax" (initial exec)
  // or "addl x@gotntpoff(%ebx) ,%eax" (initial exec, 32-bit pic)
  SDValue TGA =
      DAG.getTargetGlobalAddress(GA->getGlobal(), dl, GA->getValueType(0),
                                 GA->getOffset(), OperandFlags);
  SDValue Offset = DAG.getNode(WrapperKind, dl, PtrVT, TGA);

  if (model == TLSModel::InitialExec) {
    if (isPIC && !is64Bit) {
      Offset = DAG.getNode(ISD::ADD, dl, PtrVT,
                           DAG.getNode(X86ISD::GlobalBaseReg, SDLoc(), PtrVT),
                           Offset);
    }

    Offset = DAG.getLoad(PtrVT, dl, DAG.getEntryNode(), Offset,
                         MachinePointerInfo::getGOT(DAG.getMachineFunction()));
  }

  // The address of the thread local variable is the add of the thread
  // pointer with the offset of the variable.
  return DAG.getNode(ISD::ADD, dl, PtrVT, ThreadPointer, Offset);
}

SDValue
X86TargetLowering::LowerGlobalTLSAddress(SDValue Op, SelectionDAG &DAG) const {

  GlobalAddressSDNode *GA = cast<GlobalAddressSDNode>(Op);

  if (DAG.getTarget().Options.EmulatedTLS)
    return LowerToTLSEmulatedModel(GA, DAG);

  const GlobalValue *GV = GA->getGlobal();
  auto PtrVT = getPointerTy(DAG.getDataLayout());
  bool PositionIndependent = isPositionIndependent();

  if (Subtarget.isTargetELF()) {
    TLSModel::Model model = DAG.getTarget().getTLSModel(GV);
    switch (model) {
      case TLSModel::GeneralDynamic:
        if (Subtarget.is64Bit())
          return LowerToTLSGeneralDynamicModel64(GA, DAG, PtrVT);
        return LowerToTLSGeneralDynamicModel32(GA, DAG, PtrVT);
      case TLSModel::LocalDynamic:
        return LowerToTLSLocalDynamicModel(GA, DAG, PtrVT,
                                           Subtarget.is64Bit());
      case TLSModel::InitialExec:
      case TLSModel::LocalExec:
        return LowerToTLSExecModel(GA, DAG, PtrVT, model, Subtarget.is64Bit(),
                                   PositionIndependent);
    }
    llvm_unreachable("Unknown TLS model.");
  }

  if (Subtarget.isTargetDarwin()) {
    // Darwin only has one model of TLS.  Lower to that.
    unsigned char OpFlag = 0;
    unsigned WrapperKind = Subtarget.isPICStyleRIPRel() ?
                           X86ISD::WrapperRIP : X86ISD::Wrapper;

    // In PIC mode (unless we're in RIPRel PIC mode) we add an offset to the
    // global base reg.
    bool PIC32 = PositionIndependent && !Subtarget.is64Bit();
    if (PIC32)
      OpFlag = X86II::MO_TLVP_PIC_BASE;
    else
      OpFlag = X86II::MO_TLVP;
    SDLoc DL(Op);
    SDValue Result = DAG.getTargetGlobalAddress(GA->getGlobal(), DL,
                                                GA->getValueType(0),
                                                GA->getOffset(), OpFlag);
    SDValue Offset = DAG.getNode(WrapperKind, DL, PtrVT, Result);

    // With PIC32, the address is actually $g + Offset.
    if (PIC32)
      Offset = DAG.getNode(ISD::ADD, DL, PtrVT,
                           DAG.getNode(X86ISD::GlobalBaseReg, SDLoc(), PtrVT),
                           Offset);

    // Lowering the machine isd will make sure everything is in the right
    // location.
    SDValue Chain = DAG.getEntryNode();
    SDVTList NodeTys = DAG.getVTList(MVT::Other, MVT::Glue);
    Chain = DAG.getCALLSEQ_START(Chain, 0, 0, DL);
    SDValue Args[] = { Chain, Offset };
    Chain = DAG.getNode(X86ISD::TLSCALL, DL, NodeTys, Args);
    Chain = DAG.getCALLSEQ_END(Chain, DAG.getIntPtrConstant(0, DL, true),
                               DAG.getIntPtrConstant(0, DL, true),
                               Chain.getValue(1), DL);

    // TLSCALL will be codegen'ed as call. Inform MFI that function has calls.
    MachineFrameInfo &MFI = DAG.getMachineFunction().getFrameInfo();
    MFI.setAdjustsStack(true);

    // And our return value (tls address) is in the standard call return value
    // location.
    unsigned Reg = Subtarget.is64Bit() ? X86::RAX : X86::EAX;
    return DAG.getCopyFromReg(Chain, DL, Reg, PtrVT, Chain.getValue(1));
  }

  if (Subtarget.isTargetKnownWindowsMSVC() ||
      Subtarget.isTargetWindowsItanium() ||
      Subtarget.isTargetWindowsGNU()) {
    // Just use the implicit TLS architecture
    // Need to generate something similar to:
    //   mov     rdx, qword [gs:abs 58H]; Load pointer to ThreadLocalStorage
    //                                  ; from TEB
    //   mov     ecx, dword [rel _tls_index]: Load index (from C runtime)
    //   mov     rcx, qword [rdx+rcx*8]
    //   mov     eax, .tls$:tlsvar
    //   [rax+rcx] contains the address
    // Windows 64bit: gs:0x58
    // Windows 32bit: fs:__tls_array

    SDLoc dl(GA);
    SDValue Chain = DAG.getEntryNode();

    // Get the Thread Pointer, which is %fs:__tls_array (32-bit) or
    // %gs:0x58 (64-bit). On MinGW, __tls_array is not available, so directly
    // use its literal value of 0x2C.
    Value *Ptr = Constant::getNullValue(Subtarget.is64Bit()
                                        ? Type::getInt8PtrTy(*DAG.getContext(),
                                                             256)
                                        : Type::getInt32PtrTy(*DAG.getContext(),
                                                              257));

    SDValue TlsArray = Subtarget.is64Bit()
                           ? DAG.getIntPtrConstant(0x58, dl)
                           : (Subtarget.isTargetWindowsGNU()
                                  ? DAG.getIntPtrConstant(0x2C, dl)
                                  : DAG.getExternalSymbol("_tls_array", PtrVT));

    SDValue ThreadPointer =
        DAG.getLoad(PtrVT, dl, Chain, TlsArray, MachinePointerInfo(Ptr));

    SDValue res;
    if (GV->getThreadLocalMode() == GlobalVariable::LocalExecTLSModel) {
      res = ThreadPointer;
    } else {
      // Load the _tls_index variable
      SDValue IDX = DAG.getExternalSymbol("_tls_index", PtrVT);
      if (Subtarget.is64Bit())
        IDX = DAG.getExtLoad(ISD::ZEXTLOAD, dl, PtrVT, Chain, IDX,
                             MachinePointerInfo(), MVT::i32);
      else
        IDX = DAG.getLoad(PtrVT, dl, Chain, IDX, MachinePointerInfo());

      auto &DL = DAG.getDataLayout();
      SDValue Scale =
          DAG.getConstant(Log2_64_Ceil(DL.getPointerSize()), dl, PtrVT);
      IDX = DAG.getNode(ISD::SHL, dl, PtrVT, IDX, Scale);

      res = DAG.getNode(ISD::ADD, dl, PtrVT, ThreadPointer, IDX);
    }

    res = DAG.getLoad(PtrVT, dl, Chain, res, MachinePointerInfo());

    // Get the offset of start of .tls section
    SDValue TGA = DAG.getTargetGlobalAddress(GA->getGlobal(), dl,
                                             GA->getValueType(0),
                                             GA->getOffset(), X86II::MO_SECREL);
    SDValue Offset = DAG.getNode(X86ISD::Wrapper, dl, PtrVT, TGA);

    // The address of the thread local variable is the add of the thread
    // pointer with the offset of the variable.
    return DAG.getNode(ISD::ADD, dl, PtrVT, res, Offset);
  }

  llvm_unreachable("TLS not implemented for this target.");
}

/// Lower SRA_PARTS and friends, which return two i32 values
/// and take a 2 x i32 value to shift plus a shift amount.
static SDValue LowerShiftParts(SDValue Op, SelectionDAG &DAG) {
  assert(Op.getNumOperands() == 3 && "Not a double-shift!");
  MVT VT = Op.getSimpleValueType();
  unsigned VTBits = VT.getSizeInBits();
  SDLoc dl(Op);
  bool isSRA = Op.getOpcode() == ISD::SRA_PARTS;
  SDValue ShOpLo = Op.getOperand(0);
  SDValue ShOpHi = Op.getOperand(1);
  SDValue ShAmt  = Op.getOperand(2);
  // X86ISD::SHLD and X86ISD::SHRD have defined overflow behavior but the
  // generic ISD nodes haven't. Insert an AND to be safe, it's optimized away
  // during isel.
  SDValue SafeShAmt = DAG.getNode(ISD::AND, dl, MVT::i8, ShAmt,
                                  DAG.getConstant(VTBits - 1, dl, MVT::i8));
  SDValue Tmp1 = isSRA ? DAG.getNode(ISD::SRA, dl, VT, ShOpHi,
                                     DAG.getConstant(VTBits - 1, dl, MVT::i8))
                       : DAG.getConstant(0, dl, VT);

  SDValue Tmp2, Tmp3;
  if (Op.getOpcode() == ISD::SHL_PARTS) {
    Tmp2 = DAG.getNode(X86ISD::SHLD, dl, VT, ShOpHi, ShOpLo, ShAmt);
    Tmp3 = DAG.getNode(ISD::SHL, dl, VT, ShOpLo, SafeShAmt);
  } else {
    Tmp2 = DAG.getNode(X86ISD::SHRD, dl, VT, ShOpLo, ShOpHi, ShAmt);
    Tmp3 = DAG.getNode(isSRA ? ISD::SRA : ISD::SRL, dl, VT, ShOpHi, SafeShAmt);
  }

  // If the shift amount is larger or equal than the width of a part we can't
  // rely on the results of shld/shrd. Insert a test and select the appropriate
  // values for large shift amounts.
  SDValue AndNode = DAG.getNode(ISD::AND, dl, MVT::i8, ShAmt,
                                DAG.getConstant(VTBits, dl, MVT::i8));
  SDValue Cond = DAG.getNode(X86ISD::CMP, dl, MVT::i32,
                             AndNode, DAG.getConstant(0, dl, MVT::i8));

  SDValue Hi, Lo;
  SDValue CC = DAG.getConstant(X86::COND_NE, dl, MVT::i8);
  SDValue Ops0[4] = { Tmp2, Tmp3, CC, Cond };
  SDValue Ops1[4] = { Tmp3, Tmp1, CC, Cond };

  if (Op.getOpcode() == ISD::SHL_PARTS) {
    Hi = DAG.getNode(X86ISD::CMOV, dl, VT, Ops0);
    Lo = DAG.getNode(X86ISD::CMOV, dl, VT, Ops1);
  } else {
    Lo = DAG.getNode(X86ISD::CMOV, dl, VT, Ops0);
    Hi = DAG.getNode(X86ISD::CMOV, dl, VT, Ops1);
  }

  SDValue Ops[2] = { Lo, Hi };
  return DAG.getMergeValues(Ops, dl);
}

SDValue X86TargetLowering::LowerSINT_TO_FP(SDValue Op,
                                           SelectionDAG &DAG) const {
  SDValue Src = Op.getOperand(0);
  MVT SrcVT = Src.getSimpleValueType();
  MVT VT = Op.getSimpleValueType();
  SDLoc dl(Op);

  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  if (SrcVT.isVector()) {
    if (SrcVT == MVT::v2i32 && VT == MVT::v2f64) {
      return DAG.getNode(X86ISD::CVTSI2P, dl, VT,
                         DAG.getNode(ISD::CONCAT_VECTORS, dl, MVT::v4i32, Src,
                                     DAG.getUNDEF(SrcVT)));
    }
    if (SrcVT.getVectorElementType() == MVT::i1) {
      if (SrcVT == MVT::v2i1 && TLI.isTypeLegal(SrcVT))
        return DAG.getNode(ISD::SINT_TO_FP, dl, Op.getValueType(),
                           DAG.getNode(ISD::SIGN_EXTEND, dl, MVT::v2i64, Src));
      MVT IntegerVT = MVT::getVectorVT(MVT::i32, SrcVT.getVectorNumElements());
      return DAG.getNode(ISD::SINT_TO_FP, dl, Op.getValueType(),
                         DAG.getNode(ISD::SIGN_EXTEND, dl, IntegerVT, Src));
    }
    return SDValue();
  }

  assert(SrcVT <= MVT::i64 && SrcVT >= MVT::i16 &&
         "Unknown SINT_TO_FP to lower!");

  // These are really Legal; return the operand so the caller accepts it as
  // Legal.
  if (SrcVT == MVT::i32 && isScalarFPTypeInSSEReg(Op.getValueType()))
    return Op;
  if (SrcVT == MVT::i64 && isScalarFPTypeInSSEReg(Op.getValueType()) &&
      Subtarget.is64Bit()) {
    return Op;
  }

  SDValue ValueToStore = Op.getOperand(0);
  if (SrcVT == MVT::i64 && isScalarFPTypeInSSEReg(Op.getValueType()) &&
      !Subtarget.is64Bit())
    // Bitcasting to f64 here allows us to do a single 64-bit store from
    // an SSE register, avoiding the store forwarding penalty that would come
    // with two 32-bit stores.
    ValueToStore = DAG.getBitcast(MVT::f64, ValueToStore);

  unsigned Size = SrcVT.getSizeInBits()/8;
  MachineFunction &MF = DAG.getMachineFunction();
  auto PtrVT = getPointerTy(MF.getDataLayout());
  int SSFI = MF.getFrameInfo().CreateStackObject(Size, Size, false);
  SDValue StackSlot = DAG.getFrameIndex(SSFI, PtrVT);
  SDValue Chain = DAG.getStore(
      DAG.getEntryNode(), dl, ValueToStore, StackSlot,
      MachinePointerInfo::getFixedStack(DAG.getMachineFunction(), SSFI));
  return BuildFILD(Op, SrcVT, Chain, StackSlot, DAG);
}

SDValue X86TargetLowering::BuildFILD(SDValue Op, EVT SrcVT, SDValue Chain,
                                     SDValue StackSlot,
                                     SelectionDAG &DAG) const {
  // Build the FILD
  SDLoc DL(Op);
  SDVTList Tys;
  bool useSSE = isScalarFPTypeInSSEReg(Op.getValueType());
  if (useSSE)
    Tys = DAG.getVTList(MVT::f64, MVT::Other, MVT::Glue);
  else
    Tys = DAG.getVTList(Op.getValueType(), MVT::Other);

  unsigned ByteSize = SrcVT.getSizeInBits()/8;

  FrameIndexSDNode *FI = dyn_cast<FrameIndexSDNode>(StackSlot);
  MachineMemOperand *MMO;
  if (FI) {
    int SSFI = FI->getIndex();
    MMO = DAG.getMachineFunction().getMachineMemOperand(
        MachinePointerInfo::getFixedStack(DAG.getMachineFunction(), SSFI),
        MachineMemOperand::MOLoad, ByteSize, ByteSize);
  } else {
    MMO = cast<LoadSDNode>(StackSlot)->getMemOperand();
    StackSlot = StackSlot.getOperand(1);
  }
  SDValue Ops[] = { Chain, StackSlot, DAG.getValueType(SrcVT) };
  SDValue Result = DAG.getMemIntrinsicNode(useSSE ? X86ISD::FILD_FLAG :
                                           X86ISD::FILD, DL,
                                           Tys, Ops, SrcVT, MMO);

  if (useSSE) {
    Chain = Result.getValue(1);
    SDValue InFlag = Result.getValue(2);

    // FIXME: Currently the FST is flagged to the FILD_FLAG. This
    // shouldn't be necessary except that RFP cannot be live across
    // multiple blocks. When stackifier is fixed, they can be uncoupled.
    MachineFunction &MF = DAG.getMachineFunction();
    unsigned SSFISize = Op.getValueSizeInBits()/8;
    int SSFI = MF.getFrameInfo().CreateStackObject(SSFISize, SSFISize, false);
    auto PtrVT = getPointerTy(MF.getDataLayout());
    SDValue StackSlot = DAG.getFrameIndex(SSFI, PtrVT);
    Tys = DAG.getVTList(MVT::Other);
    SDValue Ops[] = {
      Chain, Result, StackSlot, DAG.getValueType(Op.getValueType()), InFlag
    };
    MachineMemOperand *MMO = DAG.getMachineFunction().getMachineMemOperand(
        MachinePointerInfo::getFixedStack(DAG.getMachineFunction(), SSFI),
        MachineMemOperand::MOStore, SSFISize, SSFISize);

    Chain = DAG.getMemIntrinsicNode(X86ISD::FST, DL, Tys,
                                    Ops, Op.getValueType(), MMO);
    Result = DAG.getLoad(
        Op.getValueType(), DL, Chain, StackSlot,
        MachinePointerInfo::getFixedStack(DAG.getMachineFunction(), SSFI));
  }

  return Result;
}

/// 64-bit unsigned integer to double expansion.
SDValue X86TargetLowering::LowerUINT_TO_FP_i64(SDValue Op,
                                               SelectionDAG &DAG) const {
  // This algorithm is not obvious. Here it is what we're trying to output:
  /*
     movq       %rax,  %xmm0
     punpckldq  (c0),  %xmm0  // c0: (uint4){ 0x43300000U, 0x45300000U, 0U, 0U }
     subpd      (c1),  %xmm0  // c1: (double2){ 0x1.0p52, 0x1.0p52 * 0x1.0p32 }
     #ifdef __SSE3__
       haddpd   %xmm0, %xmm0
     #else
       pshufd   $0x4e, %xmm0, %xmm1
       addpd    %xmm1, %xmm0
     #endif
  */

  SDLoc dl(Op);
  LLVMContext *Context = DAG.getContext();

  // Build some magic constants.
  static const uint32_t CV0[] = { 0x43300000, 0x45300000, 0, 0 };
  Constant *C0 = ConstantDataVector::get(*Context, CV0);
  auto PtrVT = getPointerTy(DAG.getDataLayout());
  SDValue CPIdx0 = DAG.getConstantPool(C0, PtrVT, 16);

  SmallVector<Constant*,2> CV1;
  CV1.push_back(
    ConstantFP::get(*Context, APFloat(APFloat::IEEEdouble(),
                                      APInt(64, 0x4330000000000000ULL))));
  CV1.push_back(
    ConstantFP::get(*Context, APFloat(APFloat::IEEEdouble(),
                                      APInt(64, 0x4530000000000000ULL))));
  Constant *C1 = ConstantVector::get(CV1);
  SDValue CPIdx1 = DAG.getConstantPool(C1, PtrVT, 16);

  // Load the 64-bit value into an XMM register.
  SDValue XR1 = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, MVT::v2i64,
                            Op.getOperand(0));
  SDValue CLod0 =
      DAG.getLoad(MVT::v4i32, dl, DAG.getEntryNode(), CPIdx0,
                  MachinePointerInfo::getConstantPool(DAG.getMachineFunction()),
                  /* Alignment = */ 16);
  SDValue Unpck1 =
      getUnpackl(DAG, dl, MVT::v4i32, DAG.getBitcast(MVT::v4i32, XR1), CLod0);

  SDValue CLod1 =
      DAG.getLoad(MVT::v2f64, dl, CLod0.getValue(1), CPIdx1,
                  MachinePointerInfo::getConstantPool(DAG.getMachineFunction()),
                  /* Alignment = */ 16);
  SDValue XR2F = DAG.getBitcast(MVT::v2f64, Unpck1);
  // TODO: Are there any fast-math-flags to propagate here?
  SDValue Sub = DAG.getNode(ISD::FSUB, dl, MVT::v2f64, XR2F, CLod1);
  SDValue Result;

  if (Subtarget.hasSSE3()) {
    // FIXME: The 'haddpd' instruction may be slower than 'movhlps + addsd'.
    Result = DAG.getNode(X86ISD::FHADD, dl, MVT::v2f64, Sub, Sub);
  } else {
    SDValue S2F = DAG.getBitcast(MVT::v4i32, Sub);
    SDValue Shuffle = DAG.getVectorShuffle(MVT::v4i32, dl, S2F, S2F, {2,3,0,1});
    Result = DAG.getNode(ISD::FADD, dl, MVT::v2f64,
                         DAG.getBitcast(MVT::v2f64, Shuffle), Sub);
  }

  return DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, MVT::f64, Result,
                     DAG.getIntPtrConstant(0, dl));
}

/// 32-bit unsigned integer to float expansion.
SDValue X86TargetLowering::LowerUINT_TO_FP_i32(SDValue Op,
                                               SelectionDAG &DAG) const {
  SDLoc dl(Op);
  // FP constant to bias correct the final result.
  SDValue Bias = DAG.getConstantFP(BitsToDouble(0x4330000000000000ULL), dl,
                                   MVT::f64);

  // Load the 32-bit value into an XMM register.
  SDValue Load = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, MVT::v4i32,
                             Op.getOperand(0));

  // Zero out the upper parts of the register.
  Load = getShuffleVectorZeroOrUndef(Load, 0, true, Subtarget, DAG);

  Load = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, MVT::f64,
                     DAG.getBitcast(MVT::v2f64, Load),
                     DAG.getIntPtrConstant(0, dl));

  // Or the load with the bias.
  SDValue Or = DAG.getNode(
      ISD::OR, dl, MVT::v2i64,
      DAG.getBitcast(MVT::v2i64,
                     DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, MVT::v2f64, Load)),
      DAG.getBitcast(MVT::v2i64,
                     DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, MVT::v2f64, Bias)));
  Or =
      DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, MVT::f64,
                  DAG.getBitcast(MVT::v2f64, Or), DAG.getIntPtrConstant(0, dl));

  // Subtract the bias.
  // TODO: Are there any fast-math-flags to propagate here?
  SDValue Sub = DAG.getNode(ISD::FSUB, dl, MVT::f64, Or, Bias);

  // Handle final rounding.
  MVT DestVT = Op.getSimpleValueType();

  if (DestVT.bitsLT(MVT::f64))
    return DAG.getNode(ISD::FP_ROUND, dl, DestVT, Sub,
                       DAG.getIntPtrConstant(0, dl));
  if (DestVT.bitsGT(MVT::f64))
    return DAG.getNode(ISD::FP_EXTEND, dl, DestVT, Sub);

  // Handle final rounding.
  return Sub;
}

static SDValue lowerUINT_TO_FP_v2i32(SDValue Op, SelectionDAG &DAG,
                                     const X86Subtarget &Subtarget, SDLoc &DL) {
  if (Op.getSimpleValueType() != MVT::v2f64)
    return SDValue();

  SDValue N0 = Op.getOperand(0);
  assert(N0.getSimpleValueType() == MVT::v2i32 && "Unexpected input type");

  // Legalize to v4i32 type.
  N0 = DAG.getNode(ISD::CONCAT_VECTORS, DL, MVT::v4i32, N0,
                   DAG.getUNDEF(MVT::v2i32));

  if (Subtarget.hasAVX512())
    return DAG.getNode(X86ISD::CVTUI2P, DL, MVT::v2f64, N0);

  // Same implementation as VectorLegalizer::ExpandUINT_TO_FLOAT,
  // but using v2i32 to v2f64 with X86ISD::CVTSI2P.
  SDValue HalfWord = DAG.getConstant(16, DL, MVT::v4i32);
  SDValue HalfWordMask = DAG.getConstant(0x0000FFFF, DL, MVT::v4i32);

  // Two to the power of half-word-size.
  SDValue TWOHW = DAG.getConstantFP(1 << 16, DL, MVT::v2f64);

  // Clear upper part of LO, lower HI.
  SDValue HI = DAG.getNode(ISD::SRL, DL, MVT::v4i32, N0, HalfWord);
  SDValue LO = DAG.getNode(ISD::AND, DL, MVT::v4i32, N0, HalfWordMask);

  SDValue fHI = DAG.getNode(X86ISD::CVTSI2P, DL, MVT::v2f64, HI);
          fHI = DAG.getNode(ISD::FMUL, DL, MVT::v2f64, fHI, TWOHW);
  SDValue fLO = DAG.getNode(X86ISD::CVTSI2P, DL, MVT::v2f64, LO);

  // Add the two halves.
  return DAG.getNode(ISD::FADD, DL, MVT::v2f64, fHI, fLO);
}

static SDValue lowerUINT_TO_FP_vXi32(SDValue Op, SelectionDAG &DAG,
                                     const X86Subtarget &Subtarget) {
  // The algorithm is the following:
  // #ifdef __SSE4_1__
  //     uint4 lo = _mm_blend_epi16( v, (uint4) 0x4b000000, 0xaa);
  //     uint4 hi = _mm_blend_epi16( _mm_srli_epi32(v,16),
  //                                 (uint4) 0x53000000, 0xaa);
  // #else
  //     uint4 lo = (v & (uint4) 0xffff) | (uint4) 0x4b000000;
  //     uint4 hi = (v >> 16) | (uint4) 0x53000000;
  // #endif
  //     float4 fhi = (float4) hi - (0x1.0p39f + 0x1.0p23f);
  //     return (float4) lo + fhi;

  // We shouldn't use it when unsafe-fp-math is enabled though: we might later
  // reassociate the two FADDs, and if we do that, the algorithm fails
  // spectacularly (PR24512).
  // FIXME: If we ever have some kind of Machine FMF, this should be marked
  // as non-fast and always be enabled. Why isn't SDAG FMF enough? Because
  // there's also the MachineCombiner reassociations happening on Machine IR.
  if (DAG.getTarget().Options.UnsafeFPMath)
    return SDValue();

  SDLoc DL(Op);
  SDValue V = Op->getOperand(0);
  MVT VecIntVT = V.getSimpleValueType();
  bool Is128 = VecIntVT == MVT::v4i32;
  MVT VecFloatVT = Is128 ? MVT::v4f32 : MVT::v8f32;
  // If we convert to something else than the supported type, e.g., to v4f64,
  // abort early.
  if (VecFloatVT != Op->getSimpleValueType(0))
    return SDValue();

  assert((VecIntVT == MVT::v4i32 || VecIntVT == MVT::v8i32) &&
         "Unsupported custom type");

  // In the #idef/#else code, we have in common:
  // - The vector of constants:
  // -- 0x4b000000
  // -- 0x53000000
  // - A shift:
  // -- v >> 16

  // Create the splat vector for 0x4b000000.
  SDValue VecCstLow = DAG.getConstant(0x4b000000, DL, VecIntVT);
  // Create the splat vector for 0x53000000.
  SDValue VecCstHigh = DAG.getConstant(0x53000000, DL, VecIntVT);

  // Create the right shift.
  SDValue VecCstShift = DAG.getConstant(16, DL, VecIntVT);
  SDValue HighShift = DAG.getNode(ISD::SRL, DL, VecIntVT, V, VecCstShift);

  SDValue Low, High;
  if (Subtarget.hasSSE41()) {
    MVT VecI16VT = Is128 ? MVT::v8i16 : MVT::v16i16;
    //     uint4 lo = _mm_blend_epi16( v, (uint4) 0x4b000000, 0xaa);
    SDValue VecCstLowBitcast = DAG.getBitcast(VecI16VT, VecCstLow);
    SDValue VecBitcast = DAG.getBitcast(VecI16VT, V);
    // Low will be bitcasted right away, so do not bother bitcasting back to its
    // original type.
    Low = DAG.getNode(X86ISD::BLENDI, DL, VecI16VT, VecBitcast,
                      VecCstLowBitcast, DAG.getConstant(0xaa, DL, MVT::i32));
    //     uint4 hi = _mm_blend_epi16( _mm_srli_epi32(v,16),
    //                                 (uint4) 0x53000000, 0xaa);
    SDValue VecCstHighBitcast = DAG.getBitcast(VecI16VT, VecCstHigh);
    SDValue VecShiftBitcast = DAG.getBitcast(VecI16VT, HighShift);
    // High will be bitcasted right away, so do not bother bitcasting back to
    // its original type.
    High = DAG.getNode(X86ISD::BLENDI, DL, VecI16VT, VecShiftBitcast,
                       VecCstHighBitcast, DAG.getConstant(0xaa, DL, MVT::i32));
  } else {
    SDValue VecCstMask = DAG.getConstant(0xffff, DL, VecIntVT);
    //     uint4 lo = (v & (uint4) 0xffff) | (uint4) 0x4b000000;
    SDValue LowAnd = DAG.getNode(ISD::AND, DL, VecIntVT, V, VecCstMask);
    Low = DAG.getNode(ISD::OR, DL, VecIntVT, LowAnd, VecCstLow);

    //     uint4 hi = (v >> 16) | (uint4) 0x53000000;
    High = DAG.getNode(ISD::OR, DL, VecIntVT, HighShift, VecCstHigh);
  }

  // Create the vector constant for -(0x1.0p39f + 0x1.0p23f).
  SDValue VecCstFAdd = DAG.getConstantFP(
      APFloat(APFloat::IEEEsingle(), APInt(32, 0xD3000080)), DL, VecFloatVT);

  //     float4 fhi = (float4) hi - (0x1.0p39f + 0x1.0p23f);
  SDValue HighBitcast = DAG.getBitcast(VecFloatVT, High);
  // TODO: Are there any fast-math-flags to propagate here?
  SDValue FHigh =
      DAG.getNode(ISD::FADD, DL, VecFloatVT, HighBitcast, VecCstFAdd);
  //     return (float4) lo + fhi;
  SDValue LowBitcast = DAG.getBitcast(VecFloatVT, Low);
  return DAG.getNode(ISD::FADD, DL, VecFloatVT, LowBitcast, FHigh);
}

SDValue X86TargetLowering::lowerUINT_TO_FP_vec(SDValue Op,
                                               SelectionDAG &DAG) const {
  SDValue N0 = Op.getOperand(0);
  MVT SrcVT = N0.getSimpleValueType();
  SDLoc dl(Op);

  if (SrcVT.getVectorElementType() == MVT::i1) {
    if (SrcVT == MVT::v2i1)
      return DAG.getNode(ISD::UINT_TO_FP, dl, Op.getValueType(),
                         DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::v2i64, N0));
    MVT IntegerVT = MVT::getVectorVT(MVT::i32, SrcVT.getVectorNumElements());
    return DAG.getNode(ISD::UINT_TO_FP, dl, Op.getValueType(),
                       DAG.getNode(ISD::ZERO_EXTEND, dl, IntegerVT, N0));
  }

  switch (SrcVT.SimpleTy) {
  default:
    llvm_unreachable("Custom UINT_TO_FP is not supported!");
  case MVT::v4i8:
  case MVT::v4i16:
  case MVT::v8i8:
  case MVT::v8i16: {
    MVT NVT = MVT::getVectorVT(MVT::i32, SrcVT.getVectorNumElements());
    return DAG.getNode(ISD::SINT_TO_FP, dl, Op.getValueType(),
                       DAG.getNode(ISD::ZERO_EXTEND, dl, NVT, N0));
  }
  case MVT::v2i32:
    return lowerUINT_TO_FP_v2i32(Op, DAG, Subtarget, dl);
  case MVT::v4i32:
  case MVT::v8i32:
    return lowerUINT_TO_FP_vXi32(Op, DAG, Subtarget);
  case MVT::v16i8:
  case MVT::v16i16:
    assert(Subtarget.hasAVX512());
    return DAG.getNode(ISD::UINT_TO_FP, dl, Op.getValueType(),
                       DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::v16i32, N0));
  }
}

SDValue X86TargetLowering::LowerUINT_TO_FP(SDValue Op,
                                           SelectionDAG &DAG) const {
  SDValue N0 = Op.getOperand(0);
  SDLoc dl(Op);
  auto PtrVT = getPointerTy(DAG.getDataLayout());

  // Since UINT_TO_FP is legal (it's marked custom), dag combiner won't
  // optimize it to a SINT_TO_FP when the sign bit is known zero. Perform
  // the optimization here.
  if (DAG.SignBitIsZero(N0))
    return DAG.getNode(ISD::SINT_TO_FP, dl, Op.getValueType(), N0);

  if (Op.getSimpleValueType().isVector())
    return lowerUINT_TO_FP_vec(Op, DAG);

  MVT SrcVT = N0.getSimpleValueType();
  MVT DstVT = Op.getSimpleValueType();

  if (Subtarget.hasAVX512() && isScalarFPTypeInSSEReg(DstVT) &&
      (SrcVT == MVT::i32 || (SrcVT == MVT::i64 && Subtarget.is64Bit()))) {
    // Conversions from unsigned i32 to f32/f64 are legal,
    // using VCVTUSI2SS/SD.  Same for i64 in 64-bit mode.
    return Op;
  }

  if (SrcVT == MVT::i64 && DstVT == MVT::f64 && X86ScalarSSEf64)
    return LowerUINT_TO_FP_i64(Op, DAG);
  if (SrcVT == MVT::i32 && X86ScalarSSEf64)
    return LowerUINT_TO_FP_i32(Op, DAG);
  if (Subtarget.is64Bit() && SrcVT == MVT::i64 && DstVT == MVT::f32)
    return SDValue();

  // Make a 64-bit buffer, and use it to build an FILD.
  SDValue StackSlot = DAG.CreateStackTemporary(MVT::i64);
  if (SrcVT == MVT::i32) {
    SDValue OffsetSlot = DAG.getMemBasePlusOffset(StackSlot, 4, dl);
    SDValue Store1 = DAG.getStore(DAG.getEntryNode(), dl, Op.getOperand(0),
                                  StackSlot, MachinePointerInfo());
    SDValue Store2 = DAG.getStore(Store1, dl, DAG.getConstant(0, dl, MVT::i32),
                                  OffsetSlot, MachinePointerInfo());
    SDValue Fild = BuildFILD(Op, MVT::i64, Store2, StackSlot, DAG);
    return Fild;
  }

  assert(SrcVT == MVT::i64 && "Unexpected type in UINT_TO_FP");
  SDValue ValueToStore = Op.getOperand(0);
  if (isScalarFPTypeInSSEReg(Op.getValueType()) && !Subtarget.is64Bit())
    // Bitcasting to f64 here allows us to do a single 64-bit store from
    // an SSE register, avoiding the store forwarding penalty that would come
    // with two 32-bit stores.
    ValueToStore = DAG.getBitcast(MVT::f64, ValueToStore);
  SDValue Store = DAG.getStore(DAG.getEntryNode(), dl, ValueToStore, StackSlot,
                               MachinePointerInfo());
  // For i64 source, we need to add the appropriate power of 2 if the input
  // was negative.  This is the same as the optimization in
  // DAGTypeLegalizer::ExpandIntOp_UNIT_TO_FP, and for it to be safe here,
  // we must be careful to do the computation in x87 extended precision, not
  // in SSE. (The generic code can't know it's OK to do this, or how to.)
  int SSFI = cast<FrameIndexSDNode>(StackSlot)->getIndex();
  MachineMemOperand *MMO = DAG.getMachineFunction().getMachineMemOperand(
      MachinePointerInfo::getFixedStack(DAG.getMachineFunction(), SSFI),
      MachineMemOperand::MOLoad, 8, 8);

  SDVTList Tys = DAG.getVTList(MVT::f80, MVT::Other);
  SDValue Ops[] = { Store, StackSlot, DAG.getValueType(MVT::i64) };
  SDValue Fild = DAG.getMemIntrinsicNode(X86ISD::FILD, dl, Tys, Ops,
                                         MVT::i64, MMO);

  APInt FF(32, 0x5F800000ULL);

  // Check whether the sign bit is set.
  SDValue SignSet = DAG.getSetCC(
      dl, getSetCCResultType(DAG.getDataLayout(), *DAG.getContext(), MVT::i64),
      Op.getOperand(0), DAG.getConstant(0, dl, MVT::i64), ISD::SETLT);

  // Build a 64 bit pair (0, FF) in the constant pool, with FF in the lo bits.
  SDValue FudgePtr = DAG.getConstantPool(
      ConstantInt::get(*DAG.getContext(), FF.zext(64)), PtrVT);

  // Get a pointer to FF if the sign bit was set, or to 0 otherwise.
  SDValue Zero = DAG.getIntPtrConstant(0, dl);
  SDValue Four = DAG.getIntPtrConstant(4, dl);
  SDValue Offset = DAG.getSelect(dl, Zero.getValueType(), SignSet, Zero, Four);
  FudgePtr = DAG.getNode(ISD::ADD, dl, PtrVT, FudgePtr, Offset);

  // Load the value out, extending it from f32 to f80.
  // FIXME: Avoid the extend by constructing the right constant pool?
  SDValue Fudge = DAG.getExtLoad(
      ISD::EXTLOAD, dl, MVT::f80, DAG.getEntryNode(), FudgePtr,
      MachinePointerInfo::getConstantPool(DAG.getMachineFunction()), MVT::f32,
      /* Alignment = */ 4);
  // Extend everything to 80 bits to force it to be done on x87.
  // TODO: Are there any fast-math-flags to propagate here?
  SDValue Add = DAG.getNode(ISD::FADD, dl, MVT::f80, Fild, Fudge);
  return DAG.getNode(ISD::FP_ROUND, dl, DstVT, Add,
                     DAG.getIntPtrConstant(0, dl));
}

// If the given FP_TO_SINT (IsSigned) or FP_TO_UINT (!IsSigned) operation
// is legal, or has an fp128 or f16 source (which needs to be promoted to f32),
// just return an <SDValue(), SDValue()> pair.
// Otherwise it is assumed to be a conversion from one of f32, f64 or f80
// to i16, i32 or i64, and we lower it to a legal sequence.
// If lowered to the final integer result we return a <result, SDValue()> pair.
// Otherwise we lower it to a sequence ending with a FIST, return a
// <FIST, StackSlot> pair, and the caller is responsible for loading
// the final integer result from StackSlot.
std::pair<SDValue,SDValue>
X86TargetLowering::FP_TO_INTHelper(SDValue Op, SelectionDAG &DAG,
                                   bool IsSigned, bool IsReplace) const {
  SDLoc DL(Op);

  EVT DstTy = Op.getValueType();
  EVT TheVT = Op.getOperand(0).getValueType();
  auto PtrVT = getPointerTy(DAG.getDataLayout());

  if (TheVT != MVT::f32 && TheVT != MVT::f64 && TheVT != MVT::f80) {
    // f16 must be promoted before using the lowering in this routine.
    // fp128 does not use this lowering.
    return std::make_pair(SDValue(), SDValue());
  }

  // If using FIST to compute an unsigned i64, we'll need some fixup
  // to handle values above the maximum signed i64.  A FIST is always
  // used for the 32-bit subtarget, but also for f80 on a 64-bit target.
  bool UnsignedFixup = !IsSigned &&
                       DstTy == MVT::i64 &&
                       (!Subtarget.is64Bit() ||
                        !isScalarFPTypeInSSEReg(TheVT));

  if (!IsSigned && DstTy != MVT::i64 && !Subtarget.hasAVX512()) {
    // Replace the fp-to-uint32 operation with an fp-to-sint64 FIST.
    // The low 32 bits of the fist result will have the correct uint32 result.
    assert(DstTy == MVT::i32 && "Unexpected FP_TO_UINT");
    DstTy = MVT::i64;
  }

  assert(DstTy.getSimpleVT() <= MVT::i64 &&
         DstTy.getSimpleVT() >= MVT::i16 &&
         "Unknown FP_TO_INT to lower!");

  // These are really Legal.
  if (DstTy == MVT::i32 &&
      isScalarFPTypeInSSEReg(Op.getOperand(0).getValueType()))
    return std::make_pair(SDValue(), SDValue());
  if (Subtarget.is64Bit() &&
      DstTy == MVT::i64 &&
      isScalarFPTypeInSSEReg(Op.getOperand(0).getValueType()))
    return std::make_pair(SDValue(), SDValue());

  // We lower FP->int64 into FISTP64 followed by a load from a temporary
  // stack slot.
  MachineFunction &MF = DAG.getMachineFunction();
  unsigned MemSize = DstTy.getSizeInBits()/8;
  int SSFI = MF.getFrameInfo().CreateStackObject(MemSize, MemSize, false);
  SDValue StackSlot = DAG.getFrameIndex(SSFI, PtrVT);

  unsigned Opc;
  switch (DstTy.getSimpleVT().SimpleTy) {
  default: llvm_unreachable("Invalid FP_TO_SINT to lower!");
  case MVT::i16: Opc = X86ISD::FP_TO_INT16_IN_MEM; break;
  case MVT::i32: Opc = X86ISD::FP_TO_INT32_IN_MEM; break;
  case MVT::i64: Opc = X86ISD::FP_TO_INT64_IN_MEM; break;
  }

  SDValue Chain = DAG.getEntryNode();
  SDValue Value = Op.getOperand(0);
  SDValue Adjust; // 0x0 or 0x80000000, for result sign bit adjustment.

  if (UnsignedFixup) {
    //
    // Conversion to unsigned i64 is implemented with a select,
    // depending on whether the source value fits in the range
    // of a signed i64.  Let Thresh be the FP equivalent of
    // 0x8000000000000000ULL.
    //
    //  Adjust i32 = (Value < Thresh) ? 0 : 0x80000000;
    //  FistSrc    = (Value < Thresh) ? Value : (Value - Thresh);
    //  Fist-to-mem64 FistSrc
    //  Add 0 or 0x800...0ULL to the 64-bit result, which is equivalent
    //  to XOR'ing the high 32 bits with Adjust.
    //
    // Being a power of 2, Thresh is exactly representable in all FP formats.
    // For X87 we'd like to use the smallest FP type for this constant, but
    // for DAG type consistency we have to match the FP operand type.

    APFloat Thresh(APFloat::IEEEsingle(), APInt(32, 0x5f000000));
    LLVM_ATTRIBUTE_UNUSED APFloat::opStatus Status = APFloat::opOK;
    bool LosesInfo = false;
    if (TheVT == MVT::f64)
      // The rounding mode is irrelevant as the conversion should be exact.
      Status = Thresh.convert(APFloat::IEEEdouble(), APFloat::rmNearestTiesToEven,
                              &LosesInfo);
    else if (TheVT == MVT::f80)
      Status = Thresh.convert(APFloat::x87DoubleExtended(),
                              APFloat::rmNearestTiesToEven, &LosesInfo);

    assert(Status == APFloat::opOK && !LosesInfo &&
           "FP conversion should have been exact");

    SDValue ThreshVal = DAG.getConstantFP(Thresh, DL, TheVT);

    SDValue Cmp = DAG.getSetCC(DL,
                               getSetCCResultType(DAG.getDataLayout(),
                                                  *DAG.getContext(), TheVT),
                               Value, ThreshVal, ISD::SETLT);
    Adjust = DAG.getSelect(DL, MVT::i32, Cmp,
                           DAG.getConstant(0, DL, MVT::i32),
                           DAG.getConstant(0x80000000, DL, MVT::i32));
    SDValue Sub = DAG.getNode(ISD::FSUB, DL, TheVT, Value, ThreshVal);
    Cmp = DAG.getSetCC(DL, getSetCCResultType(DAG.getDataLayout(),
                                              *DAG.getContext(), TheVT),
                       Value, ThreshVal, ISD::SETLT);
    Value = DAG.getSelect(DL, TheVT, Cmp, Value, Sub);
  }

  // FIXME This causes a redundant load/store if the SSE-class value is already
  // in memory, such as if it is on the callstack.
  if (isScalarFPTypeInSSEReg(TheVT)) {
    assert(DstTy == MVT::i64 && "Invalid FP_TO_SINT to lower!");
    Chain = DAG.getStore(Chain, DL, Value, StackSlot,
                         MachinePointerInfo::getFixedStack(MF, SSFI));
    SDVTList Tys = DAG.getVTList(Op.getOperand(0).getValueType(), MVT::Other);
    SDValue Ops[] = {
      Chain, StackSlot, DAG.getValueType(TheVT)
    };

    MachineMemOperand *MMO =
        MF.getMachineMemOperand(MachinePointerInfo::getFixedStack(MF, SSFI),
                                MachineMemOperand::MOLoad, MemSize, MemSize);
    Value = DAG.getMemIntrinsicNode(X86ISD::FLD, DL, Tys, Ops, DstTy, MMO);
    Chain = Value.getValue(1);
    SSFI = MF.getFrameInfo().CreateStackObject(MemSize, MemSize, false);
    StackSlot = DAG.getFrameIndex(SSFI, PtrVT);
  }

  MachineMemOperand *MMO =
      MF.getMachineMemOperand(MachinePointerInfo::getFixedStack(MF, SSFI),
                              MachineMemOperand::MOStore, MemSize, MemSize);

  if (UnsignedFixup) {

    // Insert the FIST, load its result as two i32's,
    // and XOR the high i32 with Adjust.

    SDValue FistOps[] = { Chain, Value, StackSlot };
    SDValue FIST = DAG.getMemIntrinsicNode(Opc, DL, DAG.getVTList(MVT::Other),
                                           FistOps, DstTy, MMO);

    SDValue Low32 =
        DAG.getLoad(MVT::i32, DL, FIST, StackSlot, MachinePointerInfo());
    SDValue HighAddr = DAG.getMemBasePlusOffset(StackSlot, 4, DL);

    SDValue High32 =
        DAG.getLoad(MVT::i32, DL, FIST, HighAddr, MachinePointerInfo());
    High32 = DAG.getNode(ISD::XOR, DL, MVT::i32, High32, Adjust);

    if (Subtarget.is64Bit()) {
      // Join High32 and Low32 into a 64-bit result.
      // (High32 << 32) | Low32
      Low32 = DAG.getNode(ISD::ZERO_EXTEND, DL, MVT::i64, Low32);
      High32 = DAG.getNode(ISD::ANY_EXTEND, DL, MVT::i64, High32);
      High32 = DAG.getNode(ISD::SHL, DL, MVT::i64, High32,
                           DAG.getConstant(32, DL, MVT::i8));
      SDValue Result = DAG.getNode(ISD::OR, DL, MVT::i64, High32, Low32);
      return std::make_pair(Result, SDValue());
    }

    SDValue ResultOps[] = { Low32, High32 };

    SDValue pair = IsReplace
      ? DAG.getNode(ISD::BUILD_PAIR, DL, MVT::i64, ResultOps)
      : DAG.getMergeValues(ResultOps, DL);
    return std::make_pair(pair, SDValue());
  } else {
    // Build the FP_TO_INT*_IN_MEM
    SDValue Ops[] = { Chain, Value, StackSlot };
    SDValue FIST = DAG.getMemIntrinsicNode(Opc, DL, DAG.getVTList(MVT::Other),
                                           Ops, DstTy, MMO);
    return std::make_pair(FIST, StackSlot);
  }
}

static SDValue LowerAVXExtend(SDValue Op, SelectionDAG &DAG,
                              const X86Subtarget &Subtarget) {
  MVT VT = Op->getSimpleValueType(0);
  SDValue In = Op->getOperand(0);
  MVT InVT = In.getSimpleValueType();
  SDLoc dl(Op);

  if (VT.is512BitVector() || InVT.getVectorElementType() == MVT::i1)
    return DAG.getNode(ISD::ZERO_EXTEND, dl, VT, In);

  // Optimize vectors in AVX mode:
  //
  //   v8i16 -> v8i32
  //   Use vpunpcklwd for 4 lower elements  v8i16 -> v4i32.
  //   Use vpunpckhwd for 4 upper elements  v8i16 -> v4i32.
  //   Concat upper and lower parts.
  //
  //   v4i32 -> v4i64
  //   Use vpunpckldq for 4 lower elements  v4i32 -> v2i64.
  //   Use vpunpckhdq for 4 upper elements  v4i32 -> v2i64.
  //   Concat upper and lower parts.
  //

  if (((VT != MVT::v16i16) || (InVT != MVT::v16i8)) &&
      ((VT != MVT::v8i32) || (InVT != MVT::v8i16)) &&
      ((VT != MVT::v4i64) || (InVT != MVT::v4i32)))
    return SDValue();

  if (Subtarget.hasInt256())
    return DAG.getNode(X86ISD::VZEXT, dl, VT, In);

  SDValue ZeroVec = getZeroVector(InVT, Subtarget, DAG, dl);
  SDValue Undef = DAG.getUNDEF(InVT);
  bool NeedZero = Op.getOpcode() == ISD::ZERO_EXTEND;
  SDValue OpLo = getUnpackl(DAG, dl, InVT, In, NeedZero ? ZeroVec : Undef);
  SDValue OpHi = getUnpackh(DAG, dl, InVT, In, NeedZero ? ZeroVec : Undef);

  MVT HVT = MVT::getVectorVT(VT.getVectorElementType(),
                             VT.getVectorNumElements()/2);

  OpLo = DAG.getBitcast(HVT, OpLo);
  OpHi = DAG.getBitcast(HVT, OpHi);

  return DAG.getNode(ISD::CONCAT_VECTORS, dl, VT, OpLo, OpHi);
}

static  SDValue LowerZERO_EXTEND_AVX512(SDValue Op,
                  const X86Subtarget &Subtarget, SelectionDAG &DAG) {
  MVT VT = Op->getSimpleValueType(0);
  SDValue In = Op->getOperand(0);
  MVT InVT = In.getSimpleValueType();
  SDLoc DL(Op);
  unsigned NumElts = VT.getVectorNumElements();

  if (VT.is512BitVector() && InVT.getVectorElementType() != MVT::i1 &&
      (NumElts == 8 || NumElts == 16 || Subtarget.hasBWI()))
    return DAG.getNode(X86ISD::VZEXT, DL, VT, In);

  if (InVT.getVectorElementType() != MVT::i1)
    return SDValue();

  // Extend VT if the target is 256 or 128bit vector and VLX is not supported.
  MVT ExtVT = VT;
  if (!VT.is512BitVector() && !Subtarget.hasVLX())
    ExtVT = MVT::getVectorVT(MVT::getIntegerVT(512/NumElts), NumElts);

  SDValue One =
   DAG.getConstant(APInt(ExtVT.getScalarSizeInBits(), 1), DL, ExtVT);
  SDValue Zero =
   DAG.getConstant(APInt::getNullValue(ExtVT.getScalarSizeInBits()), DL, ExtVT);

  SDValue SelectedVal = DAG.getSelect(DL, ExtVT, In, One, Zero);
  if (VT == ExtVT)
    return SelectedVal;
  return DAG.getNode(X86ISD::VTRUNC, DL, VT, SelectedVal);
}

static SDValue LowerANY_EXTEND(SDValue Op, const X86Subtarget &Subtarget,
                               SelectionDAG &DAG) {
  if (Subtarget.hasFp256())
    if (SDValue Res = LowerAVXExtend(Op, DAG, Subtarget))
      return Res;

  return SDValue();
}

static SDValue LowerZERO_EXTEND(SDValue Op, const X86Subtarget &Subtarget,
                                SelectionDAG &DAG) {
  SDLoc DL(Op);
  MVT VT = Op.getSimpleValueType();
  SDValue In = Op.getOperand(0);
  MVT SVT = In.getSimpleValueType();

  if (VT.is512BitVector() || SVT.getVectorElementType() == MVT::i1)
    return LowerZERO_EXTEND_AVX512(Op, Subtarget, DAG);

  if (Subtarget.hasFp256())
    if (SDValue Res = LowerAVXExtend(Op, DAG, Subtarget))
      return Res;

  assert(!VT.is256BitVector() || !SVT.is128BitVector() ||
         VT.getVectorNumElements() != SVT.getVectorNumElements());
  return SDValue();
}

/// Helper to recursively truncate vector elements in half with PACKSS/PACKUS.
/// It makes use of the fact that vectors with enough leading sign/zero bits
/// prevent the PACKSS/PACKUS from saturating the results.
/// AVX2 (Int256) sub-targets require extra shuffling as the PACK*S operates
/// within each 128-bit lane.
static SDValue truncateVectorWithPACK(unsigned Opcode, EVT DstVT, SDValue In,
                                      const SDLoc &DL, SelectionDAG &DAG,
                                      const X86Subtarget &Subtarget) {
  assert((Opcode == X86ISD::PACKSS || Opcode == X86ISD::PACKUS) &&
         "Unexpected PACK opcode");

  // Requires SSE2 but AVX512 has fast truncate.
  if (!Subtarget.hasSSE2() || Subtarget.hasAVX512())
    return SDValue();

  EVT SrcVT = In.getValueType();

  // No truncation required, we might get here due to recursive calls.
  if (SrcVT == DstVT)
    return In;

  // We only support vector truncation to 128bits or greater from a
  // 256bits or greater source.
  unsigned DstSizeInBits = DstVT.getSizeInBits();
  unsigned SrcSizeInBits = SrcVT.getSizeInBits();
  if ((DstSizeInBits % 128) != 0 || (SrcSizeInBits % 256) != 0)
    return SDValue();

  LLVMContext &Ctx = *DAG.getContext();
  unsigned NumElems = SrcVT.getVectorNumElements();
  assert(DstVT.getVectorNumElements() == NumElems && "Illegal truncation");
  assert(SrcSizeInBits > DstSizeInBits && "Illegal truncation");

  EVT PackedSVT = EVT::getIntegerVT(Ctx, SrcVT.getScalarSizeInBits() / 2);

  // Extract lower/upper subvectors.
  unsigned NumSubElts = NumElems / 2;
  SDValue Lo = extractSubVector(In, 0 * NumSubElts, DAG, DL, SrcSizeInBits / 2);
  SDValue Hi = extractSubVector(In, 1 * NumSubElts, DAG, DL, SrcSizeInBits / 2);

  // Pack to the largest type possible:
  // vXi64/vXi32 -> PACK*SDW and vXi16 -> PACK*SWB.
  EVT InVT = MVT::i16, OutVT = MVT::i8;
  if (DstVT.getScalarSizeInBits() > 8 &&
      (Opcode == X86ISD::PACKSS || Subtarget.hasSSE41())) {
    InVT = MVT::i32;
    OutVT = MVT::i16;
  }

  unsigned SubSizeInBits = SrcSizeInBits / 2;
  InVT = EVT::getVectorVT(Ctx, InVT, SubSizeInBits / InVT.getSizeInBits());
  OutVT = EVT::getVectorVT(Ctx, OutVT, SubSizeInBits / OutVT.getSizeInBits());

  // 256bit -> 128bit truncate - PACK lower/upper 128-bit subvectors.
  if (SrcVT.is256BitVector()) {
    Lo = DAG.getBitcast(InVT, Lo);
    Hi = DAG.getBitcast(InVT, Hi);
    SDValue Res = DAG.getNode(Opcode, DL, OutVT, Lo, Hi);
    return DAG.getBitcast(DstVT, Res);
  }

  // AVX2: 512bit -> 256bit truncate - PACK lower/upper 256-bit subvectors.
  // AVX2: 512bit -> 128bit truncate - PACK(PACK, PACK).
  if (SrcVT.is512BitVector() && Subtarget.hasInt256()) {
    Lo = DAG.getBitcast(InVT, Lo);
    Hi = DAG.getBitcast(InVT, Hi);
    SDValue Res = DAG.getNode(Opcode, DL, OutVT, Lo, Hi);

    // 256-bit PACK(ARG0, ARG1) leaves us with ((LO0,LO1),(HI0,HI1)),
    // so we need to shuffle to get ((LO0,HI0),(LO1,HI1)).
    Res = DAG.getBitcast(MVT::v4i64, Res);
    Res = DAG.getVectorShuffle(MVT::v4i64, DL, Res, Res, {0, 2, 1, 3});

    if (DstVT.is256BitVector())
      return DAG.getBitcast(DstVT, Res);

    // If 512bit -> 128bit truncate another stage.
    EVT PackedVT = EVT::getVectorVT(Ctx, PackedSVT, NumElems);
    Res = DAG.getBitcast(PackedVT, Res);
    return truncateVectorWithPACK(Opcode, DstVT, Res, DL, DAG, Subtarget);
  }

  // Recursively pack lower/upper subvectors, concat result and pack again.
  assert(SrcSizeInBits >= 512 && "Expected 512-bit vector or greater");
  EVT PackedVT = EVT::getVectorVT(Ctx, PackedSVT, NumSubElts);
  Lo = truncateVectorWithPACK(Opcode, PackedVT, Lo, DL, DAG, Subtarget);
  Hi = truncateVectorWithPACK(Opcode, PackedVT, Hi, DL, DAG, Subtarget);

  PackedVT = EVT::getVectorVT(Ctx, PackedSVT, NumElems);
  SDValue Res = DAG.getNode(ISD::CONCAT_VECTORS, DL, PackedVT, Lo, Hi);
  return truncateVectorWithPACK(Opcode, DstVT, Res, DL, DAG, Subtarget);
}

static SDValue LowerTruncateVecI1(SDValue Op, SelectionDAG &DAG,
                                  const X86Subtarget &Subtarget) {

  SDLoc DL(Op);
  MVT VT = Op.getSimpleValueType();
  SDValue In = Op.getOperand(0);
  MVT InVT = In.getSimpleValueType();

  assert(VT.getVectorElementType() == MVT::i1 && "Unexpected vector type.");

  // Shift LSB to MSB and use VPMOVB/W2M or TESTD/Q.
  unsigned ShiftInx = InVT.getScalarSizeInBits() - 1;
  if (InVT.getScalarSizeInBits() <= 16) {
    if (Subtarget.hasBWI()) {
      // legal, will go to VPMOVB2M, VPMOVW2M
      // Shift packed bytes not supported natively, bitcast to word
      MVT ExtVT = MVT::getVectorVT(MVT::i16, InVT.getSizeInBits()/16);
      SDValue  ShiftNode = DAG.getNode(ISD::SHL, DL, ExtVT,
                                       DAG.getBitcast(ExtVT, In),
                                       DAG.getConstant(ShiftInx, DL, ExtVT));
      ShiftNode = DAG.getBitcast(InVT, ShiftNode);
      return DAG.getNode(X86ISD::CVT2MASK, DL, VT, ShiftNode);
    }
    // Use TESTD/Q, extended vector to packed dword/qword.
    assert((InVT.is256BitVector() || InVT.is128BitVector()) &&
           "Unexpected vector type.");
    unsigned NumElts = InVT.getVectorNumElements();
    MVT ExtVT = MVT::getVectorVT(MVT::getIntegerVT(512/NumElts), NumElts);
    In = DAG.getNode(ISD::SIGN_EXTEND, DL, ExtVT, In);
    InVT = ExtVT;
    ShiftInx = InVT.getScalarSizeInBits() - 1;
  }

  SDValue  ShiftNode = DAG.getNode(ISD::SHL, DL, InVT, In,
                                   DAG.getConstant(ShiftInx, DL, InVT));
  return DAG.getNode(X86ISD::TESTM, DL, VT, ShiftNode, ShiftNode);
}

SDValue X86TargetLowering::LowerTRUNCATE(SDValue Op, SelectionDAG &DAG) const {
  SDLoc DL(Op);
  MVT VT = Op.getSimpleValueType();
  SDValue In = Op.getOperand(0);
  MVT InVT = In.getSimpleValueType();
  unsigned InNumEltBits = InVT.getScalarSizeInBits();

  assert(VT.getVectorNumElements() == InVT.getVectorNumElements() &&
         "Invalid TRUNCATE operation");

  if (VT.getVectorElementType() == MVT::i1)
    return LowerTruncateVecI1(Op, DAG, Subtarget);

  // vpmovqb/w/d, vpmovdb/w, vpmovwb
  if (Subtarget.hasAVX512()) {
    // word to byte only under BWI
    if (InVT == MVT::v16i16 && !Subtarget.hasBWI()) // v16i16 -> v16i8
      return DAG.getNode(X86ISD::VTRUNC, DL, VT,
                         getExtendInVec(X86ISD::VSEXT, DL, MVT::v16i32, In, DAG));
    return DAG.getNode(X86ISD::VTRUNC, DL, VT, In);
  }

  // Truncate with PACKSS if we are truncating a vector with sign-bits that
  // extend all the way to the packed/truncated value.
  unsigned NumPackedBits = std::min<unsigned>(VT.getScalarSizeInBits(), 16);
  if ((InNumEltBits - NumPackedBits) < DAG.ComputeNumSignBits(In))
    if (SDValue V =
            truncateVectorWithPACK(X86ISD::PACKSS, VT, In, DL, DAG, Subtarget))
      return V;

  // Truncate with PACKUS if we are truncating a vector with leading zero bits
  // that extend all the way to the packed/truncated value.
  // Pre-SSE41 we can only use PACKUSWB.
  KnownBits Known;
  DAG.computeKnownBits(In, Known);
  NumPackedBits = Subtarget.hasSSE41() ? NumPackedBits : 8;
  if ((InNumEltBits - NumPackedBits) <= Known.countMinLeadingZeros())
    if (SDValue V =
            truncateVectorWithPACK(X86ISD::PACKUS, VT, In, DL, DAG, Subtarget))
      return V;

  if ((VT == MVT::v4i32) && (InVT == MVT::v4i64)) {
    // On AVX2, v4i64 -> v4i32 becomes VPERMD.
    if (Subtarget.hasInt256()) {
      static const int ShufMask[] = {0, 2, 4, 6, -1, -1, -1, -1};
      In = DAG.getBitcast(MVT::v8i32, In);
      In = DAG.getVectorShuffle(MVT::v8i32, DL, In, In, ShufMask);
      return DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, VT, In,
                         DAG.getIntPtrConstant(0, DL));
    }

    SDValue OpLo = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, MVT::v2i64, In,
                               DAG.getIntPtrConstant(0, DL));
    SDValue OpHi = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, MVT::v2i64, In,
                               DAG.getIntPtrConstant(2, DL));
    OpLo = DAG.getBitcast(MVT::v4i32, OpLo);
    OpHi = DAG.getBitcast(MVT::v4i32, OpHi);
    static const int ShufMask[] = {0, 2, 4, 6};
    return DAG.getVectorShuffle(VT, DL, OpLo, OpHi, ShufMask);
  }

  if ((VT == MVT::v8i16) && (InVT == MVT::v8i32)) {
    // On AVX2, v8i32 -> v8i16 becomes PSHUFB.
    if (Subtarget.hasInt256()) {
      In = DAG.getBitcast(MVT::v32i8, In);

      // The PSHUFB mask:
      static const int ShufMask1[] = { 0,  1,  4,  5,  8,  9, 12, 13,
                                      -1, -1, -1, -1, -1, -1, -1, -1,
                                      16, 17, 20, 21, 24, 25, 28, 29,
                                      -1, -1, -1, -1, -1, -1, -1, -1 };
      In = DAG.getVectorShuffle(MVT::v32i8, DL, In, In, ShufMask1);
      In = DAG.getBitcast(MVT::v4i64, In);

      static const int ShufMask2[] = {0,  2,  -1,  -1};
      In = DAG.getVectorShuffle(MVT::v4i64, DL,  In, In, ShufMask2);
      In = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, MVT::v2i64, In,
                       DAG.getIntPtrConstant(0, DL));
      return DAG.getBitcast(VT, In);
    }

    SDValue OpLo = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, MVT::v4i32, In,
                               DAG.getIntPtrConstant(0, DL));

    SDValue OpHi = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, MVT::v4i32, In,
                               DAG.getIntPtrConstant(4, DL));

    OpLo = DAG.getBitcast(MVT::v16i8, OpLo);
    OpHi = DAG.getBitcast(MVT::v16i8, OpHi);

    // The PSHUFB mask:
    static const int ShufMask1[] = {0,  1,  4,  5,  8,  9, 12, 13,
                                   -1, -1, -1, -1, -1, -1, -1, -1};

    OpLo = DAG.getVectorShuffle(MVT::v16i8, DL, OpLo, OpLo, ShufMask1);
    OpHi = DAG.getVectorShuffle(MVT::v16i8, DL, OpHi, OpHi, ShufMask1);

    OpLo = DAG.getBitcast(MVT::v4i32, OpLo);
    OpHi = DAG.getBitcast(MVT::v4i32, OpHi);

    // The MOVLHPS Mask:
    static const int ShufMask2[] = {0, 1, 4, 5};
    SDValue res = DAG.getVectorShuffle(MVT::v4i32, DL, OpLo, OpHi, ShufMask2);
    return DAG.getBitcast(MVT::v8i16, res);
  }

  // Handle truncation of V256 to V128 using shuffles.
  if (!VT.is128BitVector() || !InVT.is256BitVector())
    return SDValue();

  assert(Subtarget.hasFp256() && "256-bit vector without AVX!");

  unsigned NumElems = VT.getVectorNumElements();
  MVT NVT = MVT::getVectorVT(VT.getVectorElementType(), NumElems * 2);

  SmallVector<int, 16> MaskVec(NumElems * 2, -1);
  // Prepare truncation shuffle mask
  for (unsigned i = 0; i != NumElems; ++i)
    MaskVec[i] = i * 2;
  In = DAG.getBitcast(NVT, In);
  SDValue V = DAG.getVectorShuffle(NVT, DL, In, In, MaskVec);
  return DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, VT, V,
                     DAG.getIntPtrConstant(0, DL));
}

SDValue X86TargetLowering::LowerFP_TO_INT(SDValue Op, SelectionDAG &DAG) const {
  bool IsSigned = Op.getOpcode() == ISD::FP_TO_SINT;
  MVT VT = Op.getSimpleValueType();

  if (VT.isVector()) {
    assert(Subtarget.hasDQI() && Subtarget.hasVLX() && "Requires AVX512DQVL!");
    SDValue Src = Op.getOperand(0);
    SDLoc dl(Op);
    if (VT == MVT::v2i64 && Src.getSimpleValueType() == MVT::v2f32) {
      return DAG.getNode(IsSigned ? X86ISD::CVTTP2SI : X86ISD::CVTTP2UI, dl, VT,
                         DAG.getNode(ISD::CONCAT_VECTORS, dl, MVT::v4f32, Src,
                                     DAG.getUNDEF(MVT::v2f32)));
    }

    return SDValue();
  }

  assert(!VT.isVector());

  std::pair<SDValue,SDValue> Vals = FP_TO_INTHelper(Op, DAG,
    IsSigned, /*IsReplace=*/ false);
  SDValue FIST = Vals.first, StackSlot = Vals.second;
  // If FP_TO_INTHelper failed, the node is actually supposed to be Legal.
  if (!FIST.getNode())
    return Op;

  if (StackSlot.getNode())
    // Load the result.
    return DAG.getLoad(VT, SDLoc(Op), FIST, StackSlot, MachinePointerInfo());

  // The node is the result.
  return FIST;
}

static SDValue LowerFP_EXTEND(SDValue Op, SelectionDAG &DAG) {
  SDLoc DL(Op);
  MVT VT = Op.getSimpleValueType();
  SDValue In = Op.getOperand(0);
  MVT SVT = In.getSimpleValueType();

  assert(SVT == MVT::v2f32 && "Only customize MVT::v2f32 type legalization!");

  return DAG.getNode(X86ISD::VFPEXT, DL, VT,
                     DAG.getNode(ISD::CONCAT_VECTORS, DL, MVT::v4f32,
                                 In, DAG.getUNDEF(SVT)));
}

/// The only differences between FABS and FNEG are the mask and the logic op.
/// FNEG also has a folding opportunity for FNEG(FABS(x)).
static SDValue LowerFABSorFNEG(SDValue Op, SelectionDAG &DAG) {
  assert((Op.getOpcode() == ISD::FABS || Op.getOpcode() == ISD::FNEG) &&
         "Wrong opcode for lowering FABS or FNEG.");

  bool IsFABS = (Op.getOpcode() == ISD::FABS);

  // If this is a FABS and it has an FNEG user, bail out to fold the combination
  // into an FNABS. We'll lower the FABS after that if it is still in use.
  if (IsFABS)
    for (SDNode *User : Op->uses())
      if (User->getOpcode() == ISD::FNEG)
        return Op;

  SDLoc dl(Op);
  MVT VT = Op.getSimpleValueType();

  bool IsF128 = (VT == MVT::f128);

  // FIXME: Use function attribute "OptimizeForSize" and/or CodeGenOpt::Level to
  // decide if we should generate a 16-byte constant mask when we only need 4 or
  // 8 bytes for the scalar case.

  MVT LogicVT;
  MVT EltVT;

  if (VT.isVector()) {
    LogicVT = VT;
    EltVT = VT.getVectorElementType();
  } else if (IsF128) {
    // SSE instructions are used for optimized f128 logical operations.
    LogicVT = MVT::f128;
    EltVT = VT;
  } else {
    // There are no scalar bitwise logical SSE/AVX instructions, so we
    // generate a 16-byte vector constant and logic op even for the scalar case.
    // Using a 16-byte mask allows folding the load of the mask with
    // the logic op, so it can save (~4 bytes) on code size.
    LogicVT = (VT == MVT::f64) ? MVT::v2f64 : MVT::v4f32;
    EltVT = VT;
  }

  unsigned EltBits = EltVT.getSizeInBits();
  // For FABS, mask is 0x7f...; for FNEG, mask is 0x80...
  APInt MaskElt =
    IsFABS ? APInt::getSignedMaxValue(EltBits) : APInt::getSignMask(EltBits);
  const fltSemantics &Sem =
      EltVT == MVT::f64 ? APFloat::IEEEdouble() :
          (IsF128 ? APFloat::IEEEquad() : APFloat::IEEEsingle());
  SDValue Mask = DAG.getConstantFP(APFloat(Sem, MaskElt), dl, LogicVT);

  SDValue Op0 = Op.getOperand(0);
  bool IsFNABS = !IsFABS && (Op0.getOpcode() == ISD::FABS);
  unsigned LogicOp =
    IsFABS ? X86ISD::FAND : IsFNABS ? X86ISD::FOR : X86ISD::FXOR;
  SDValue Operand = IsFNABS ? Op0.getOperand(0) : Op0;

  if (VT.isVector() || IsF128)
    return DAG.getNode(LogicOp, dl, LogicVT, Operand, Mask);

  // For the scalar case extend to a 128-bit vector, perform the logic op,
  // and extract the scalar result back out.
  Operand = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, LogicVT, Operand);
  SDValue LogicNode = DAG.getNode(LogicOp, dl, LogicVT, Operand, Mask);
  return DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, VT, LogicNode,
                     DAG.getIntPtrConstant(0, dl));
}

static SDValue LowerFCOPYSIGN(SDValue Op, SelectionDAG &DAG) {
  SDValue Mag = Op.getOperand(0);
  SDValue Sign = Op.getOperand(1);
  SDLoc dl(Op);

  // If the sign operand is smaller, extend it first.
  MVT VT = Op.getSimpleValueType();
  if (Sign.getSimpleValueType().bitsLT(VT))
    Sign = DAG.getNode(ISD::FP_EXTEND, dl, VT, Sign);

  // And if it is bigger, shrink it first.
  if (Sign.getSimpleValueType().bitsGT(VT))
    Sign = DAG.getNode(ISD::FP_ROUND, dl, VT, Sign, DAG.getIntPtrConstant(1, dl));

  // At this point the operands and the result should have the same
  // type, and that won't be f80 since that is not custom lowered.
  bool IsF128 = (VT == MVT::f128);
  assert((VT == MVT::f64 || VT == MVT::f32 || VT == MVT::f128 ||
          VT == MVT::v2f64 || VT == MVT::v4f64 || VT == MVT::v4f32 ||
          VT == MVT::v8f32 || VT == MVT::v8f64 || VT == MVT::v16f32) &&
         "Unexpected type in LowerFCOPYSIGN");

  MVT EltVT = VT.getScalarType();
  const fltSemantics &Sem =
      EltVT == MVT::f64 ? APFloat::IEEEdouble()
                        : (IsF128 ? APFloat::IEEEquad() : APFloat::IEEEsingle());

  // Perform all scalar logic operations as 16-byte vectors because there are no
  // scalar FP logic instructions in SSE.
  // TODO: This isn't necessary. If we used scalar types, we might avoid some
  // unnecessary splats, but we might miss load folding opportunities. Should
  // this decision be based on OptimizeForSize?
  bool IsFakeVector = !VT.isVector() && !IsF128;
  MVT LogicVT = VT;
  if (IsFakeVector)
    LogicVT = (VT == MVT::f64) ? MVT::v2f64 : MVT::v4f32;

  // The mask constants are automatically splatted for vector types.
  unsigned EltSizeInBits = VT.getScalarSizeInBits();
  SDValue SignMask = DAG.getConstantFP(
      APFloat(Sem, APInt::getSignMask(EltSizeInBits)), dl, LogicVT);
  SDValue MagMask = DAG.getConstantFP(
      APFloat(Sem, ~APInt::getSignMask(EltSizeInBits)), dl, LogicVT);

  // First, clear all bits but the sign bit from the second operand (sign).
  if (IsFakeVector)
    Sign = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, LogicVT, Sign);
  SDValue SignBit = DAG.getNode(X86ISD::FAND, dl, LogicVT, Sign, SignMask);

  // Next, clear the sign bit from the first operand (magnitude).
  // TODO: If we had general constant folding for FP logic ops, this check
  // wouldn't be necessary.
  SDValue MagBits;
  if (ConstantFPSDNode *Op0CN = dyn_cast<ConstantFPSDNode>(Mag)) {
    APFloat APF = Op0CN->getValueAPF();
    APF.clearSign();
    MagBits = DAG.getConstantFP(APF, dl, LogicVT);
  } else {
    // If the magnitude operand wasn't a constant, we need to AND out the sign.
    if (IsFakeVector)
      Mag = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, LogicVT, Mag);
    MagBits = DAG.getNode(X86ISD::FAND, dl, LogicVT, Mag, MagMask);
  }

  // OR the magnitude value with the sign bit.
  SDValue Or = DAG.getNode(X86ISD::FOR, dl, LogicVT, MagBits, SignBit);
  return !IsFakeVector ? Or : DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, VT, Or,
                                          DAG.getIntPtrConstant(0, dl));
}

static SDValue LowerFGETSIGN(SDValue Op, SelectionDAG &DAG) {
  SDValue N0 = Op.getOperand(0);
  SDLoc dl(Op);
  MVT VT = Op.getSimpleValueType();

  MVT OpVT = N0.getSimpleValueType();
  assert((OpVT == MVT::f32 || OpVT == MVT::f64) &&
         "Unexpected type for FGETSIGN");

  // Lower ISD::FGETSIGN to (AND (X86ISD::MOVMSK ...) 1).
  MVT VecVT = (OpVT == MVT::f32 ? MVT::v4f32 : MVT::v2f64);
  SDValue Res = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VecVT, N0);
  Res = DAG.getNode(X86ISD::MOVMSK, dl, MVT::i32, Res);
  Res = DAG.getZExtOrTrunc(Res, dl, VT);
  Res = DAG.getNode(ISD::AND, dl, VT, Res, DAG.getConstant(1, dl, VT));
  return Res;
}

// Check whether an OR'd tree is PTEST-able.
static SDValue LowerVectorAllZeroTest(SDValue Op, const X86Subtarget &Subtarget,
                                      SelectionDAG &DAG) {
  assert(Op.getOpcode() == ISD::OR && "Only check OR'd tree.");

  if (!Subtarget.hasSSE41())
    return SDValue();

  if (!Op->hasOneUse())
    return SDValue();

  SDNode *N = Op.getNode();
  SDLoc DL(N);

  SmallVector<SDValue, 8> Opnds;
  DenseMap<SDValue, unsigned> VecInMap;
  SmallVector<SDValue, 8> VecIns;
  EVT VT = MVT::Other;

  // Recognize a special case where a vector is casted into wide integer to
  // test all 0s.
  Opnds.push_back(N->getOperand(0));
  Opnds.push_back(N->getOperand(1));

  for (unsigned Slot = 0, e = Opnds.size(); Slot < e; ++Slot) {
    SmallVectorImpl<SDValue>::const_iterator I = Opnds.begin() + Slot;
    // BFS traverse all OR'd operands.
    if (I->getOpcode() == ISD::OR) {
      Opnds.push_back(I->getOperand(0));
      Opnds.push_back(I->getOperand(1));
      // Re-evaluate the number of nodes to be traversed.
      e += 2; // 2 more nodes (LHS and RHS) are pushed.
      continue;
    }

    // Quit if a non-EXTRACT_VECTOR_ELT
    if (I->getOpcode() != ISD::EXTRACT_VECTOR_ELT)
      return SDValue();

    // Quit if without a constant index.
    SDValue Idx = I->getOperand(1);
    if (!isa<ConstantSDNode>(Idx))
      return SDValue();

    SDValue ExtractedFromVec = I->getOperand(0);
    DenseMap<SDValue, unsigned>::iterator M = VecInMap.find(ExtractedFromVec);
    if (M == VecInMap.end()) {
      VT = ExtractedFromVec.getValueType();
      // Quit if not 128/256-bit vector.
      if (!VT.is128BitVector() && !VT.is256BitVector())
        return SDValue();
      // Quit if not the same type.
      if (VecInMap.begin() != VecInMap.end() &&
          VT != VecInMap.begin()->first.getValueType())
        return SDValue();
      M = VecInMap.insert(std::make_pair(ExtractedFromVec, 0)).first;
      VecIns.push_back(ExtractedFromVec);
    }
    M->second |= 1U << cast<ConstantSDNode>(Idx)->getZExtValue();
  }

  assert((VT.is128BitVector() || VT.is256BitVector()) &&
         "Not extracted from 128-/256-bit vector.");

  unsigned FullMask = (1U << VT.getVectorNumElements()) - 1U;

  for (DenseMap<SDValue, unsigned>::const_iterator
        I = VecInMap.begin(), E = VecInMap.end(); I != E; ++I) {
    // Quit if not all elements are used.
    if (I->second != FullMask)
      return SDValue();
  }

  MVT TestVT = VT.is128BitVector() ? MVT::v2i64 : MVT::v4i64;

  // Cast all vectors into TestVT for PTEST.
  for (unsigned i = 0, e = VecIns.size(); i < e; ++i)
    VecIns[i] = DAG.getBitcast(TestVT, VecIns[i]);

  // If more than one full vector is evaluated, OR them first before PTEST.
  for (unsigned Slot = 0, e = VecIns.size(); e - Slot > 1; Slot += 2, e += 1) {
    // Each iteration will OR 2 nodes and append the result until there is only
    // 1 node left, i.e. the final OR'd value of all vectors.
    SDValue LHS = VecIns[Slot];
    SDValue RHS = VecIns[Slot + 1];
    VecIns.push_back(DAG.getNode(ISD::OR, DL, TestVT, LHS, RHS));
  }

  return DAG.getNode(X86ISD::PTEST, DL, MVT::i32, VecIns.back(), VecIns.back());
}

/// \brief return true if \c Op has a use that doesn't just read flags.
static bool hasNonFlagsUse(SDValue Op) {
  for (SDNode::use_iterator UI = Op->use_begin(), UE = Op->use_end(); UI != UE;
       ++UI) {
    SDNode *User = *UI;
    unsigned UOpNo = UI.getOperandNo();
    if (User->getOpcode() == ISD::TRUNCATE && User->hasOneUse()) {
      // Look pass truncate.
      UOpNo = User->use_begin().getOperandNo();
      User = *User->use_begin();
    }

    if (User->getOpcode() != ISD::BRCOND && User->getOpcode() != ISD::SETCC &&
        !(User->getOpcode() == ISD::SELECT && UOpNo == 0))
      return true;
  }
  return false;
}

// Emit KTEST instruction for bit vectors on AVX-512
static SDValue EmitKTEST(SDValue Op, SelectionDAG &DAG,
                         const X86Subtarget &Subtarget) {
  if (Op.getOpcode() == ISD::BITCAST) {
    auto hasKTEST = [&](MVT VT) {
      unsigned SizeInBits = VT.getSizeInBits();
      return (Subtarget.hasDQI() && (SizeInBits == 8 || SizeInBits == 16)) ||
        (Subtarget.hasBWI() && (SizeInBits == 32 || SizeInBits == 64));
    };
    SDValue Op0 = Op.getOperand(0);
    MVT Op0VT = Op0.getValueType().getSimpleVT();
    if (Op0VT.isVector() && Op0VT.getVectorElementType() == MVT::i1 &&
        hasKTEST(Op0VT))
      return DAG.getNode(X86ISD::KTEST, SDLoc(Op), Op0VT, Op0, Op0);
  }
  return SDValue();
}

/// Emit nodes that will be selected as "test Op0,Op0", or something
/// equivalent.
SDValue X86TargetLowering::EmitTest(SDValue Op, unsigned X86CC, const SDLoc &dl,
                                    SelectionDAG &DAG) const {
  if (Op.getValueType() == MVT::i1) {
    SDValue ExtOp = DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::i8, Op);
    return DAG.getNode(X86ISD::CMP, dl, MVT::i32, ExtOp,
                       DAG.getConstant(0, dl, MVT::i8));
  }
  // CF and OF aren't always set the way we want. Determine which
  // of these we need.
  bool NeedCF = false;
  bool NeedOF = false;
  switch (X86CC) {
  default: break;
  case X86::COND_A: case X86::COND_AE:
  case X86::COND_B: case X86::COND_BE:
    NeedCF = true;
    break;
  case X86::COND_G: case X86::COND_GE:
  case X86::COND_L: case X86::COND_LE:
  case X86::COND_O: case X86::COND_NO: {
    // Check if we really need to set the
    // Overflow flag. If NoSignedWrap is present
    // that is not actually needed.
    switch (Op->getOpcode()) {
    case ISD::ADD:
    case ISD::SUB:
    case ISD::MUL:
    case ISD::SHL:
      if (Op.getNode()->getFlags().hasNoSignedWrap())
        break;
      LLVM_FALLTHROUGH;
    default:
      NeedOF = true;
      break;
    }
    break;
  }
  }
  // See if we can use the EFLAGS value from the operand instead of
  // doing a separate TEST. TEST always sets OF and CF to 0, so unless
  // we prove that the arithmetic won't overflow, we can't use OF or CF.
  if (Op.getResNo() != 0 || NeedOF || NeedCF) {
    // Emit KTEST for bit vectors
    if (auto Node = EmitKTEST(Op, DAG, Subtarget))
      return Node;
    // Emit a CMP with 0, which is the TEST pattern.
    return DAG.getNode(X86ISD::CMP, dl, MVT::i32, Op,
                       DAG.getConstant(0, dl, Op.getValueType()));
  }
  unsigned Opcode = 0;
  unsigned NumOperands = 0;

  // Truncate operations may prevent the merge of the SETCC instruction
  // and the arithmetic instruction before it. Attempt to truncate the operands
  // of the arithmetic instruction and use a reduced bit-width instruction.
  bool NeedTruncation = false;
  SDValue ArithOp = Op;
  if (Op->getOpcode() == ISD::TRUNCATE && Op->hasOneUse()) {
    SDValue Arith = Op->getOperand(0);
    // Both the trunc and the arithmetic op need to have one user each.
    if (Arith->hasOneUse())
      switch (Arith.getOpcode()) {
        default: break;
        case ISD::ADD:
        case ISD::SUB:
        case ISD::AND:
        case ISD::OR:
        case ISD::XOR: {
          NeedTruncation = true;
          ArithOp = Arith;
        }
      }
  }

  // Sometimes flags can be set either with an AND or with an SRL/SHL
  // instruction. SRL/SHL variant should be preferred for masks longer than this
  // number of bits.
  const int ShiftToAndMaxMaskWidth = 32;
  const bool ZeroCheck = (X86CC == X86::COND_E || X86CC == X86::COND_NE);

  // NOTICE: In the code below we use ArithOp to hold the arithmetic operation
  // which may be the result of a CAST.  We use the variable 'Op', which is the
  // non-casted variable when we check for possible users.
  switch (ArithOp.getOpcode()) {
  case ISD::ADD:
    // We only want to rewrite this as a target-specific node with attached
    // flags if there is a reasonable chance of either using that to do custom
    // instructions selection that can fold some of the memory operands, or if
    // only the flags are used. If there are other uses, leave the node alone
    // and emit a test instruction.
    for (SDNode::use_iterator UI = Op.getNode()->use_begin(),
         UE = Op.getNode()->use_end(); UI != UE; ++UI)
      if (UI->getOpcode() != ISD::CopyToReg &&
          UI->getOpcode() != ISD::SETCC &&
          UI->getOpcode() != ISD::STORE)
        goto default_case;

    if (auto *C = dyn_cast<ConstantSDNode>(ArithOp.getOperand(1))) {
      // An add of one will be selected as an INC.
      if (C->isOne() &&
          (!Subtarget.slowIncDec() ||
           DAG.getMachineFunction().getFunction()->optForSize())) {
        Opcode = X86ISD::INC;
        NumOperands = 1;
        break;
      }

      // An add of negative one (subtract of one) will be selected as a DEC.
      if (C->isAllOnesValue() &&
          (!Subtarget.slowIncDec() ||
           DAG.getMachineFunction().getFunction()->optForSize())) {
        Opcode = X86ISD::DEC;
        NumOperands = 1;
        break;
      }
    }

    // Otherwise use a regular EFLAGS-setting add.
    Opcode = X86ISD::ADD;
    NumOperands = 2;
    break;
  case ISD::SHL:
  case ISD::SRL:
    // If we have a constant logical shift that's only used in a comparison
    // against zero turn it into an equivalent AND. This allows turning it into
    // a TEST instruction later.
    if (ZeroCheck && Op->hasOneUse() &&
        isa<ConstantSDNode>(Op->getOperand(1)) && !hasNonFlagsUse(Op)) {
      EVT VT = Op.getValueType();
      unsigned BitWidth = VT.getSizeInBits();
      unsigned ShAmt = Op->getConstantOperandVal(1);
      if (ShAmt >= BitWidth) // Avoid undefined shifts.
        break;
      APInt Mask = ArithOp.getOpcode() == ISD::SRL
                       ? APInt::getHighBitsSet(BitWidth, BitWidth - ShAmt)
                       : APInt::getLowBitsSet(BitWidth, BitWidth - ShAmt);
      if (!Mask.isSignedIntN(ShiftToAndMaxMaskWidth))
        break;
      Op = DAG.getNode(ISD::AND, dl, VT, Op->getOperand(0),
                       DAG.getConstant(Mask, dl, VT));
    }
    break;

  case ISD::AND:
    // If the primary 'and' result isn't used, don't bother using X86ISD::AND,
    // because a TEST instruction will be better. However, AND should be
    // preferred if the instruction can be combined into ANDN.
    if (!hasNonFlagsUse(Op)) {
      SDValue Op0 = ArithOp->getOperand(0);
      SDValue Op1 = ArithOp->getOperand(1);
      EVT VT = ArithOp.getValueType();
      bool isAndn = isBitwiseNot(Op0) || isBitwiseNot(Op1);
      bool isLegalAndnType = VT == MVT::i32 || VT == MVT::i64;
      bool isProperAndn = isAndn && isLegalAndnType && Subtarget.hasBMI();

      // If we cannot select an ANDN instruction, check if we can replace
      // AND+IMM64 with a shift before giving up. This is possible for masks
      // like 0xFF000000 or 0x00FFFFFF and if we care only about the zero flag.
      if (!isProperAndn) {
        if (!ZeroCheck)
          break;

        assert(!isa<ConstantSDNode>(Op0) && "AND node isn't canonicalized");
        auto *CN = dyn_cast<ConstantSDNode>(Op1);
        if (!CN)
          break;

        const APInt &Mask = CN->getAPIntValue();
        if (Mask.isSignedIntN(ShiftToAndMaxMaskWidth))
          break; // Prefer TEST instruction.

        unsigned BitWidth = Mask.getBitWidth();
        unsigned LeadingOnes = Mask.countLeadingOnes();
        unsigned TrailingZeros = Mask.countTrailingZeros();

        if (LeadingOnes + TrailingZeros == BitWidth) {
          assert(TrailingZeros < VT.getSizeInBits() &&
                 "Shift amount should be less than the type width");
          MVT ShTy = getScalarShiftAmountTy(DAG.getDataLayout(), VT);
          SDValue ShAmt = DAG.getConstant(TrailingZeros, dl, ShTy);
          Op = DAG.getNode(ISD::SRL, dl, VT, Op0, ShAmt);
          break;
        }

        unsigned LeadingZeros = Mask.countLeadingZeros();
        unsigned TrailingOnes = Mask.countTrailingOnes();

        if (LeadingZeros + TrailingOnes == BitWidth) {
          assert(LeadingZeros < VT.getSizeInBits() &&
                 "Shift amount should be less than the type width");
          MVT ShTy = getScalarShiftAmountTy(DAG.getDataLayout(), VT);
          SDValue ShAmt = DAG.getConstant(LeadingZeros, dl, ShTy);
          Op = DAG.getNode(ISD::SHL, dl, VT, Op0, ShAmt);
          break;
        }

        break;
      }
    }
    LLVM_FALLTHROUGH;
  case ISD::SUB:
  case ISD::OR:
  case ISD::XOR:
    // Similar to ISD::ADD above, check if the uses will preclude useful
    // lowering of the target-specific node.
    for (SDNode::use_iterator UI = Op.getNode()->use_begin(),
           UE = Op.getNode()->use_end(); UI != UE; ++UI)
      if (UI->getOpcode() != ISD::CopyToReg &&
          UI->getOpcode() != ISD::SETCC &&
          UI->getOpcode() != ISD::STORE)
        goto default_case;

    // Otherwise use a regular EFLAGS-setting instruction.
    switch (ArithOp.getOpcode()) {
    default: llvm_unreachable("unexpected operator!");
    case ISD::SUB: Opcode = X86ISD::SUB; break;
    case ISD::XOR: Opcode = X86ISD::XOR; break;
    case ISD::AND: Opcode = X86ISD::AND; break;
    case ISD::OR: {
      if (!NeedTruncation && ZeroCheck) {
        if (SDValue EFLAGS = LowerVectorAllZeroTest(Op, Subtarget, DAG))
          return EFLAGS;
      }
      Opcode = X86ISD::OR;
      break;
    }
    }

    NumOperands = 2;
    break;
  case X86ISD::ADD:
  case X86ISD::SUB:
  case X86ISD::INC:
  case X86ISD::DEC:
  case X86ISD::OR:
  case X86ISD::XOR:
  case X86ISD::AND:
    return SDValue(Op.getNode(), 1);
  default:
  default_case:
    break;
  }

  // If we found that truncation is beneficial, perform the truncation and
  // update 'Op'.
  if (NeedTruncation) {
    EVT VT = Op.getValueType();
    SDValue WideVal = Op->getOperand(0);
    EVT WideVT = WideVal.getValueType();
    unsigned ConvertedOp = 0;
    // Use a target machine opcode to prevent further DAGCombine
    // optimizations that may separate the arithmetic operations
    // from the setcc node.
    switch (WideVal.getOpcode()) {
      default: break;
      case ISD::ADD: ConvertedOp = X86ISD::ADD; break;
      case ISD::SUB: ConvertedOp = X86ISD::SUB; break;
      case ISD::AND: ConvertedOp = X86ISD::AND; break;
      case ISD::OR:  ConvertedOp = X86ISD::OR;  break;
      case ISD::XOR: ConvertedOp = X86ISD::XOR; break;
    }

    if (ConvertedOp) {
      const TargetLowering &TLI = DAG.getTargetLoweringInfo();
      if (TLI.isOperationLegal(WideVal.getOpcode(), WideVT)) {
        SDValue V0 = DAG.getNode(ISD::TRUNCATE, dl, VT, WideVal.getOperand(0));
        SDValue V1 = DAG.getNode(ISD::TRUNCATE, dl, VT, WideVal.getOperand(1));
        Op = DAG.getNode(ConvertedOp, dl, VT, V0, V1);
      }
    }
  }

  if (Opcode == 0) {
    // Emit KTEST for bit vectors
    if (auto Node = EmitKTEST(Op, DAG, Subtarget))
      return Node;

    // Emit a CMP with 0, which is the TEST pattern.
    return DAG.getNode(X86ISD::CMP, dl, MVT::i32, Op,
                       DAG.getConstant(0, dl, Op.getValueType()));
  }
  SDVTList VTs = DAG.getVTList(Op.getValueType(), MVT::i32);
  SmallVector<SDValue, 4> Ops(Op->op_begin(), Op->op_begin() + NumOperands);

  SDValue New = DAG.getNode(Opcode, dl, VTs, Ops);
  DAG.ReplaceAllUsesWith(Op, New);
  return SDValue(New.getNode(), 1);
}

/// Emit nodes that will be selected as "cmp Op0,Op1", or something
/// equivalent.
SDValue X86TargetLowering::EmitCmp(SDValue Op0, SDValue Op1, unsigned X86CC,
                                   const SDLoc &dl, SelectionDAG &DAG) const {
  if (isNullConstant(Op1))
    return EmitTest(Op0, X86CC, dl, DAG);

  assert(!(isa<ConstantSDNode>(Op1) && Op0.getValueType() == MVT::i1) &&
         "Unexpected comparison operation for MVT::i1 operands");

  if ((Op0.getValueType() == MVT::i8 || Op0.getValueType() == MVT::i16 ||
       Op0.getValueType() == MVT::i32 || Op0.getValueType() == MVT::i64)) {
    // Only promote the compare up to I32 if it is a 16 bit operation
    // with an immediate.  16 bit immediates are to be avoided.
    if ((Op0.getValueType() == MVT::i16 &&
         (isa<ConstantSDNode>(Op0) || isa<ConstantSDNode>(Op1))) &&
        !DAG.getMachineFunction().getFunction()->optForMinSize() &&
        !Subtarget.isAtom()) {
      unsigned ExtendOp =
          isX86CCUnsigned(X86CC) ? ISD::ZERO_EXTEND : ISD::SIGN_EXTEND;
      Op0 = DAG.getNode(ExtendOp, dl, MVT::i32, Op0);
      Op1 = DAG.getNode(ExtendOp, dl, MVT::i32, Op1);
    }
    // Use SUB instead of CMP to enable CSE between SUB and CMP.
    SDVTList VTs = DAG.getVTList(Op0.getValueType(), MVT::i32);
    SDValue Sub = DAG.getNode(X86ISD::SUB, dl, VTs, Op0, Op1);
    return SDValue(Sub.getNode(), 1);
  }
  return DAG.getNode(X86ISD::CMP, dl, MVT::i32, Op0, Op1);
}

/// Convert a comparison if required by the subtarget.
SDValue X86TargetLowering::ConvertCmpIfNecessary(SDValue Cmp,
                                                 SelectionDAG &DAG) const {
  // If the subtarget does not support the FUCOMI instruction, floating-point
  // comparisons have to be converted.
  if (Subtarget.hasCMov() ||
      Cmp.getOpcode() != X86ISD::CMP ||
      !Cmp.getOperand(0).getValueType().isFloatingPoint() ||
      !Cmp.getOperand(1).getValueType().isFloatingPoint())
    return Cmp;

  // The instruction selector will select an FUCOM instruction instead of
  // FUCOMI, which writes the comparison result to FPSW instead of EFLAGS. Hence
  // build an SDNode sequence that transfers the result from FPSW into EFLAGS:
  // (X86sahf (trunc (srl (X86fp_stsw (trunc (X86cmp ...)), 8))))
  SDLoc dl(Cmp);
  SDValue TruncFPSW = DAG.getNode(ISD::TRUNCATE, dl, MVT::i16, Cmp);
  SDValue FNStSW = DAG.getNode(X86ISD::FNSTSW16r, dl, MVT::i16, TruncFPSW);
  SDValue Srl = DAG.getNode(ISD::SRL, dl, MVT::i16, FNStSW,
                            DAG.getConstant(8, dl, MVT::i8));
  SDValue TruncSrl = DAG.getNode(ISD::TRUNCATE, dl, MVT::i8, Srl);

  // Some 64-bit targets lack SAHF support, but they do support FCOMI.
  assert(Subtarget.hasLAHFSAHF() && "Target doesn't support SAHF or FCOMI?");
  return DAG.getNode(X86ISD::SAHF, dl, MVT::i32, TruncSrl);
}

/// Check if replacement of SQRT with RSQRT should be disabled.
bool X86TargetLowering::isFsqrtCheap(SDValue Op, SelectionDAG &DAG) const {
  EVT VT = Op.getValueType();

  // We never want to use both SQRT and RSQRT instructions for the same input.
  if (DAG.getNodeIfExists(X86ISD::FRSQRT, DAG.getVTList(VT), Op))
    return false;

  if (VT.isVector())
    return Subtarget.hasFastVectorFSQRT();
  return Subtarget.hasFastScalarFSQRT();
}

/// The minimum architected relative accuracy is 2^-12. We need one
/// Newton-Raphson step to have a good float result (24 bits of precision).
SDValue X86TargetLowering::getSqrtEstimate(SDValue Op,
                                           SelectionDAG &DAG, int Enabled,
                                           int &RefinementSteps,
                                           bool &UseOneConstNR,
                                           bool Reciprocal) const {
  EVT VT = Op.getValueType();

  // SSE1 has rsqrtss and rsqrtps. AVX adds a 256-bit variant for rsqrtps.
  // TODO: Add support for AVX512 (v16f32).
  // It is likely not profitable to do this for f64 because a double-precision
  // rsqrt estimate with refinement on x86 prior to FMA requires at least 16
  // instructions: convert to single, rsqrtss, convert back to double, refine
  // (3 steps = at least 13 insts). If an 'rsqrtsd' variant was added to the ISA
  // along with FMA, this could be a throughput win.
  if ((VT == MVT::f32 && Subtarget.hasSSE1()) ||
      (VT == MVT::v4f32 && Subtarget.hasSSE1()) ||
      (VT == MVT::v8f32 && Subtarget.hasAVX())) {
    if (RefinementSteps == ReciprocalEstimate::Unspecified)
      RefinementSteps = 1;

    UseOneConstNR = false;
    return DAG.getNode(X86ISD::FRSQRT, SDLoc(Op), VT, Op);
  }
  return SDValue();
}

/// The minimum architected relative accuracy is 2^-12. We need one
/// Newton-Raphson step to have a good float result (24 bits of precision).
SDValue X86TargetLowering::getRecipEstimate(SDValue Op, SelectionDAG &DAG,
                                            int Enabled,
                                            int &RefinementSteps) const {
  EVT VT = Op.getValueType();

  // SSE1 has rcpss and rcpps. AVX adds a 256-bit variant for rcpps.
  // TODO: Add support for AVX512 (v16f32).
  // It is likely not profitable to do this for f64 because a double-precision
  // reciprocal estimate with refinement on x86 prior to FMA requires
  // 15 instructions: convert to single, rcpss, convert back to double, refine
  // (3 steps = 12 insts). If an 'rcpsd' variant was added to the ISA
  // along with FMA, this could be a throughput win.

  if ((VT == MVT::f32 && Subtarget.hasSSE1()) ||
      (VT == MVT::v4f32 && Subtarget.hasSSE1()) ||
      (VT == MVT::v8f32 && Subtarget.hasAVX())) {
    // Enable estimate codegen with 1 refinement step for vector division.
    // Scalar division estimates are disabled because they break too much
    // real-world code. These defaults are intended to match GCC behavior.
    if (VT == MVT::f32 && Enabled == ReciprocalEstimate::Unspecified)
      return SDValue();

    if (RefinementSteps == ReciprocalEstimate::Unspecified)
      RefinementSteps = 1;

    return DAG.getNode(X86ISD::FRCP, SDLoc(Op), VT, Op);
  }
  return SDValue();
}

/// If we have at least two divisions that use the same divisor, convert to
/// multiplication by a reciprocal. This may need to be adjusted for a given
/// CPU if a division's cost is not at least twice the cost of a multiplication.
/// This is because we still need one division to calculate the reciprocal and
/// then we need two multiplies by that reciprocal as replacements for the
/// original divisions.
unsigned X86TargetLowering::combineRepeatedFPDivisors() const {
  return 2;
}

/// Helper for creating a X86ISD::SETCC node.
static SDValue getSETCC(X86::CondCode Cond, SDValue EFLAGS, const SDLoc &dl,
                        SelectionDAG &DAG) {
  return DAG.getNode(X86ISD::SETCC, dl, MVT::i8,
                     DAG.getConstant(Cond, dl, MVT::i8), EFLAGS);
}

/// Create a BT (Bit Test) node - Test bit \p BitNo in \p Src and set condition
/// according to equal/not-equal condition code \p CC.
static SDValue getBitTestCondition(SDValue Src, SDValue BitNo, ISD::CondCode CC,
                                   const SDLoc &dl, SelectionDAG &DAG) {
  // If Src is i8, promote it to i32 with any_extend.  There is no i8 BT
  // instruction.  Since the shift amount is in-range-or-undefined, we know
  // that doing a bittest on the i32 value is ok.  We extend to i32 because
  // the encoding for the i16 version is larger than the i32 version.
  // Also promote i16 to i32 for performance / code size reason.
  if (Src.getValueType() == MVT::i8 || Src.getValueType() == MVT::i16)
    Src = DAG.getNode(ISD::ANY_EXTEND, dl, MVT::i32, Src);

  // See if we can use the 32-bit instruction instead of the 64-bit one for a
  // shorter encoding. Since the former takes the modulo 32 of BitNo and the
  // latter takes the modulo 64, this is only valid if the 5th bit of BitNo is
  // known to be zero.
  if (Src.getValueType() == MVT::i64 &&
      DAG.MaskedValueIsZero(BitNo, APInt(BitNo.getValueSizeInBits(), 32)))
    Src = DAG.getNode(ISD::TRUNCATE, dl, MVT::i32, Src);

  // If the operand types disagree, extend the shift amount to match.  Since
  // BT ignores high bits (like shifts) we can use anyextend.
  if (Src.getValueType() != BitNo.getValueType())
    BitNo = DAG.getNode(ISD::ANY_EXTEND, dl, Src.getValueType(), BitNo);

  SDValue BT = DAG.getNode(X86ISD::BT, dl, MVT::i32, Src, BitNo);
  X86::CondCode Cond = CC == ISD::SETEQ ? X86::COND_AE : X86::COND_B;
  return getSETCC(Cond, BT, dl , DAG);
}

/// Result of 'and' is compared against zero. Change to a BT node if possible.
static SDValue LowerAndToBT(SDValue And, ISD::CondCode CC,
                            const SDLoc &dl, SelectionDAG &DAG) {
  assert(And.getOpcode() == ISD::AND && "Expected AND node!");
  SDValue Op0 = And.getOperand(0);
  SDValue Op1 = And.getOperand(1);
  if (Op0.getOpcode() == ISD::TRUNCATE)
    Op0 = Op0.getOperand(0);
  if (Op1.getOpcode() == ISD::TRUNCATE)
    Op1 = Op1.getOperand(0);

  SDValue LHS, RHS;
  if (Op1.getOpcode() == ISD::SHL)
    std::swap(Op0, Op1);
  if (Op0.getOpcode() == ISD::SHL) {
    if (isOneConstant(Op0.getOperand(0))) {
      // If we looked past a truncate, check that it's only truncating away
      // known zeros.
      unsigned BitWidth = Op0.getValueSizeInBits();
      unsigned AndBitWidth = And.getValueSizeInBits();
      if (BitWidth > AndBitWidth) {
        KnownBits Known;
        DAG.computeKnownBits(Op0, Known);
        if (Known.countMinLeadingZeros() < BitWidth - AndBitWidth)
          return SDValue();
      }
      LHS = Op1;
      RHS = Op0.getOperand(1);
    }
  } else if (Op1.getOpcode() == ISD::Constant) {
    ConstantSDNode *AndRHS = cast<ConstantSDNode>(Op1);
    uint64_t AndRHSVal = AndRHS->getZExtValue();
    SDValue AndLHS = Op0;

    if (AndRHSVal == 1 && AndLHS.getOpcode() == ISD::SRL) {
      LHS = AndLHS.getOperand(0);
      RHS = AndLHS.getOperand(1);
    }

    // Use BT if the immediate can't be encoded in a TEST instruction.
    if (!isUInt<32>(AndRHSVal) && isPowerOf2_64(AndRHSVal)) {
      LHS = AndLHS;
      RHS = DAG.getConstant(Log2_64_Ceil(AndRHSVal), dl, LHS.getValueType());
    }
  }

  if (LHS.getNode())
    return getBitTestCondition(LHS, RHS, CC, dl, DAG);

  return SDValue();
}

/// Turns an ISD::CondCode into a value suitable for SSE floating-point mask
/// CMPs.
static unsigned translateX86FSETCC(ISD::CondCode SetCCOpcode, SDValue &Op0,
                                   SDValue &Op1) {
  unsigned SSECC;
  bool Swap = false;

  // SSE Condition code mapping:
  //  0 - EQ
  //  1 - LT
  //  2 - LE
  //  3 - UNORD
  //  4 - NEQ
  //  5 - NLT
  //  6 - NLE
  //  7 - ORD
  switch (SetCCOpcode) {
  default: llvm_unreachable("Unexpected SETCC condition");
  case ISD::SETOEQ:
  case ISD::SETEQ:  SSECC = 0; break;
  case ISD::SETOGT:
  case ISD::SETGT:  Swap = true; LLVM_FALLTHROUGH;
  case ISD::SETLT:
  case ISD::SETOLT: SSECC = 1; break;
  case ISD::SETOGE:
  case ISD::SETGE:  Swap = true; LLVM_FALLTHROUGH;
  case ISD::SETLE:
  case ISD::SETOLE: SSECC = 2; break;
  case ISD::SETUO:  SSECC = 3; break;
  case ISD::SETUNE:
  case ISD::SETNE:  SSECC = 4; break;
  case ISD::SETULE: Swap = true; LLVM_FALLTHROUGH;
  case ISD::SETUGE: SSECC = 5; break;
  case ISD::SETULT: Swap = true; LLVM_FALLTHROUGH;
  case ISD::SETUGT: SSECC = 6; break;
  case ISD::SETO:   SSECC = 7; break;
  case ISD::SETUEQ: SSECC = 8; break;
  case ISD::SETONE: SSECC = 12; break;
  }
  if (Swap)
    std::swap(Op0, Op1);

  return SSECC;
}

/// Break a VSETCC 256-bit integer VSETCC into two new 128 ones and then
/// concatenate the result back.
static SDValue Lower256IntVSETCC(SDValue Op, SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();

  assert(VT.is256BitVector() && Op.getOpcode() == ISD::SETCC &&
         "Unsupported value type for operation");

  unsigned NumElems = VT.getVectorNumElements();
  SDLoc dl(Op);
  SDValue CC = Op.getOperand(2);

  // Extract the LHS vectors
  SDValue LHS = Op.getOperand(0);
  SDValue LHS1 = extract128BitVector(LHS, 0, DAG, dl);
  SDValue LHS2 = extract128BitVector(LHS, NumElems / 2, DAG, dl);

  // Extract the RHS vectors
  SDValue RHS = Op.getOperand(1);
  SDValue RHS1 = extract128BitVector(RHS, 0, DAG, dl);
  SDValue RHS2 = extract128BitVector(RHS, NumElems / 2, DAG, dl);

  // Issue the operation on the smaller types and concatenate the result back
  MVT EltVT = VT.getVectorElementType();
  MVT NewVT = MVT::getVectorVT(EltVT, NumElems/2);
  return DAG.getNode(ISD::CONCAT_VECTORS, dl, VT,
                     DAG.getNode(Op.getOpcode(), dl, NewVT, LHS1, RHS1, CC),
                     DAG.getNode(Op.getOpcode(), dl, NewVT, LHS2, RHS2, CC));
}

static SDValue LowerBoolVSETCC_AVX512(SDValue Op, SelectionDAG &DAG) {
  SDValue Op0 = Op.getOperand(0);
  SDValue Op1 = Op.getOperand(1);
  SDValue CC = Op.getOperand(2);
  MVT VT = Op.getSimpleValueType();
  SDLoc dl(Op);

  assert(Op0.getSimpleValueType().getVectorElementType() == MVT::i1 &&
         "Unexpected type for boolean compare operation");
  ISD::CondCode SetCCOpcode = cast<CondCodeSDNode>(CC)->get();
  SDValue NotOp0 = DAG.getNode(ISD::XOR, dl, VT, Op0,
                               DAG.getConstant(-1, dl, VT));
  SDValue NotOp1 = DAG.getNode(ISD::XOR, dl, VT, Op1,
                               DAG.getConstant(-1, dl, VT));
  switch (SetCCOpcode) {
  default: llvm_unreachable("Unexpected SETCC condition");
  case ISD::SETEQ:
    // (x == y) -> ~(x ^ y)
    return DAG.getNode(ISD::XOR, dl, VT,
                       DAG.getNode(ISD::XOR, dl, VT, Op0, Op1),
                       DAG.getConstant(-1, dl, VT));
  case ISD::SETNE:
    // (x != y) -> (x ^ y)
    return DAG.getNode(ISD::XOR, dl, VT, Op0, Op1);
  case ISD::SETUGT:
  case ISD::SETGT:
    // (x > y) -> (x & ~y)
    return DAG.getNode(ISD::AND, dl, VT, Op0, NotOp1);
  case ISD::SETULT:
  case ISD::SETLT:
    // (x < y) -> (~x & y)
    return DAG.getNode(ISD::AND, dl, VT, NotOp0, Op1);
  case ISD::SETULE:
  case ISD::SETLE:
    // (x <= y) -> (~x | y)
    return DAG.getNode(ISD::OR, dl, VT, NotOp0, Op1);
  case ISD::SETUGE:
  case ISD::SETGE:
    // (x >=y) -> (x | ~y)
    return DAG.getNode(ISD::OR, dl, VT, Op0, NotOp1);
  }
}

static SDValue LowerIntVSETCC_AVX512(SDValue Op, SelectionDAG &DAG) {

  SDValue Op0 = Op.getOperand(0);
  SDValue Op1 = Op.getOperand(1);
  SDValue CC = Op.getOperand(2);
  MVT VT = Op.getSimpleValueType();
  SDLoc dl(Op);

  assert(VT.getVectorElementType() == MVT::i1 &&
         "Cannot set masked compare for this operation");

  ISD::CondCode SetCCOpcode = cast<CondCodeSDNode>(CC)->get();
  unsigned  Opc = 0;
  bool Unsigned = false;
  bool Swap = false;
  unsigned SSECC;
  switch (SetCCOpcode) {
  default: llvm_unreachable("Unexpected SETCC condition");
  case ISD::SETNE:  SSECC = 4; break;
  case ISD::SETEQ:  Opc = X86ISD::PCMPEQM; break;
  case ISD::SETUGT: SSECC = 6; Unsigned = true; break;
  case ISD::SETLT:  Swap = true; LLVM_FALLTHROUGH;
  case ISD::SETGT:  Opc = X86ISD::PCMPGTM; break;
  case ISD::SETULT: SSECC = 1; Unsigned = true; break;
  case ISD::SETUGE: SSECC = 5; Unsigned = true; break; //NLT
  case ISD::SETGE:  Swap = true; SSECC = 2; break; // LE + swap
  case ISD::SETULE: Unsigned = true; LLVM_FALLTHROUGH;
  case ISD::SETLE:  SSECC = 2; break;
  }

  if (Swap)
    std::swap(Op0, Op1);

  //  See if it is the case of CMP(EQ|NEQ,AND(A,B),ZERO) and change it to TESTM|NM.
  if ((!Opc && SSECC == 4) || Opc == X86ISD::PCMPEQM) {
    SDValue A = peekThroughBitcasts(Op0);
    if ((A.getOpcode() == ISD::AND || A.getOpcode() == X86ISD::FAND) &&
        ISD::isBuildVectorAllZeros(Op1.getNode())) {
      MVT VT0 = Op0.getSimpleValueType();
      SDValue RHS = DAG.getBitcast(VT0, A.getOperand(0));
      SDValue LHS = DAG.getBitcast(VT0, A.getOperand(1));
      return DAG.getNode(Opc == X86ISD::PCMPEQM ? X86ISD::TESTNM : X86ISD::TESTM,
                         dl, VT, RHS, LHS);
    }
  }

  if (Opc)
    return DAG.getNode(Opc, dl, VT, Op0, Op1);
  Opc = Unsigned ? X86ISD::CMPMU: X86ISD::CMPM;
  return DAG.getNode(Opc, dl, VT, Op0, Op1,
                     DAG.getConstant(SSECC, dl, MVT::i8));
}

/// \brief Try to turn a VSETULT into a VSETULE by modifying its second
/// operand \p Op1.  If non-trivial (for example because it's not constant)
/// return an empty value.
static SDValue ChangeVSETULTtoVSETULE(const SDLoc &dl, SDValue Op1,
                                      SelectionDAG &DAG) {
  BuildVectorSDNode *BV = dyn_cast<BuildVectorSDNode>(Op1.getNode());
  if (!BV)
    return SDValue();

  MVT VT = Op1.getSimpleValueType();
  MVT EVT = VT.getVectorElementType();
  unsigned n = VT.getVectorNumElements();
  SmallVector<SDValue, 8> ULTOp1;

  for (unsigned i = 0; i < n; ++i) {
    ConstantSDNode *Elt = dyn_cast<ConstantSDNode>(BV->getOperand(i));
    if (!Elt || Elt->isOpaque() || Elt->getSimpleValueType(0) != EVT)
      return SDValue();

    // Avoid underflow.
    APInt Val = Elt->getAPIntValue();
    if (Val == 0)
      return SDValue();

    ULTOp1.push_back(DAG.getConstant(Val - 1, dl, EVT));
  }

  return DAG.getBuildVector(VT, dl, ULTOp1);
}

static SDValue LowerVSETCC(SDValue Op, const X86Subtarget &Subtarget,
                           SelectionDAG &DAG) {
  SDValue Op0 = Op.getOperand(0);
  SDValue Op1 = Op.getOperand(1);
  SDValue CC = Op.getOperand(2);
  MVT VT = Op.getSimpleValueType();
  ISD::CondCode Cond = cast<CondCodeSDNode>(CC)->get();
  bool isFP = Op.getOperand(1).getSimpleValueType().isFloatingPoint();
  SDLoc dl(Op);

  if (isFP) {
#ifndef NDEBUG
    MVT EltVT = Op0.getSimpleValueType().getVectorElementType();
    assert(EltVT == MVT::f32 || EltVT == MVT::f64);
#endif

    unsigned Opc;
    if (Subtarget.hasAVX512() && VT.getVectorElementType() == MVT::i1) {
      assert(VT.getVectorNumElements() <= 16);
      Opc = X86ISD::CMPM;
    } else {
      Opc = X86ISD::CMPP;
      // The SSE/AVX packed FP comparison nodes are defined with a
      // floating-point vector result that matches the operand type. This allows
      // them to work with an SSE1 target (integer vector types are not legal).
      VT = Op0.getSimpleValueType();
    }

    // In the two cases not handled by SSE compare predicates (SETUEQ/SETONE),
    // emit two comparisons and a logic op to tie them together.
    SDValue Cmp;
    unsigned SSECC = translateX86FSETCC(Cond, Op0, Op1);
    if (SSECC >= 8 && !Subtarget.hasAVX()) {
      // LLVM predicate is SETUEQ or SETONE.
      unsigned CC0, CC1;
      unsigned CombineOpc;
      if (Cond == ISD::SETUEQ) {
        CC0 = 3; // UNORD
        CC1 = 0; // EQ
        CombineOpc = Opc == X86ISD::CMPP ? static_cast<unsigned>(X86ISD::FOR) :
                                           static_cast<unsigned>(ISD::OR);
      } else {
        assert(Cond == ISD::SETONE);
        CC0 = 7; // ORD
        CC1 = 4; // NEQ
        CombineOpc = Opc == X86ISD::CMPP ? static_cast<unsigned>(X86ISD::FAND) :
                                           static_cast<unsigned>(ISD::AND);
      }

      SDValue Cmp0 = DAG.getNode(Opc, dl, VT, Op0, Op1,
                                 DAG.getConstant(CC0, dl, MVT::i8));
      SDValue Cmp1 = DAG.getNode(Opc, dl, VT, Op0, Op1,
                                 DAG.getConstant(CC1, dl, MVT::i8));
      Cmp = DAG.getNode(CombineOpc, dl, VT, Cmp0, Cmp1);
    } else {
      // Handle all other FP comparisons here.
      Cmp = DAG.getNode(Opc, dl, VT, Op0, Op1,
                        DAG.getConstant(SSECC, dl, MVT::i8));
    }

    // If this is SSE/AVX CMPP, bitcast the result back to integer to match the
    // result type of SETCC. The bitcast is expected to be optimized away
    // during combining/isel.
    if (Opc == X86ISD::CMPP)
      Cmp = DAG.getBitcast(Op.getSimpleValueType(), Cmp);

    return Cmp;
  }

  MVT VTOp0 = Op0.getSimpleValueType();
  assert(VTOp0 == Op1.getSimpleValueType() &&
         "Expected operands with same type!");
  assert(VT.getVectorNumElements() == VTOp0.getVectorNumElements() &&
         "Invalid number of packed elements for source and destination!");

  if (VT.is128BitVector() && VTOp0.is256BitVector()) {
    // On non-AVX512 targets, a vector of MVT::i1 is promoted by the type
    // legalizer to a wider vector type.  In the case of 'vsetcc' nodes, the
    // legalizer firstly checks if the first operand in input to the setcc has
    // a legal type. If so, then it promotes the return type to that same type.
    // Otherwise, the return type is promoted to the 'next legal type' which,
    // for a vector of MVT::i1 is always a 128-bit integer vector type.
    //
    // We reach this code only if the following two conditions are met:
    // 1. Both return type and operand type have been promoted to wider types
    //    by the type legalizer.
    // 2. The original operand type has been promoted to a 256-bit vector.
    //
    // Note that condition 2. only applies for AVX targets.
    SDValue NewOp = DAG.getSetCC(dl, VTOp0, Op0, Op1, Cond);
    return DAG.getZExtOrTrunc(NewOp, dl, VT);
  }

  // The non-AVX512 code below works under the assumption that source and
  // destination types are the same.
  assert((Subtarget.hasAVX512() || (VT == VTOp0)) &&
         "Value types for source and destination must be the same!");

  // Break 256-bit integer vector compare into smaller ones.
  if (VT.is256BitVector() && !Subtarget.hasInt256())
    return Lower256IntVSETCC(Op, DAG);

  // Operands are boolean (vectors of i1)
  MVT OpVT = Op1.getSimpleValueType();
  if (OpVT.getVectorElementType() == MVT::i1)
    return LowerBoolVSETCC_AVX512(Op, DAG);

  // The result is boolean, but operands are int/float
  if (VT.getVectorElementType() == MVT::i1) {
    // In AVX-512 architecture setcc returns mask with i1 elements,
    // But there is no compare instruction for i8 and i16 elements in KNL.
    // In this case use SSE compare
    bool UseAVX512Inst =
      (OpVT.is512BitVector() ||
       OpVT.getScalarSizeInBits() >= 32 ||
       (Subtarget.hasBWI() && Subtarget.hasVLX()));

    if (UseAVX512Inst)
      return LowerIntVSETCC_AVX512(Op, DAG);

    return DAG.getNode(ISD::TRUNCATE, dl, VT,
                        DAG.getNode(ISD::SETCC, dl, OpVT, Op0, Op1, CC));
  }

  // Lower using XOP integer comparisons.
  if ((VT == MVT::v16i8 || VT == MVT::v8i16 ||
       VT == MVT::v4i32 || VT == MVT::v2i64) && Subtarget.hasXOP()) {
    // Translate compare code to XOP PCOM compare mode.
    unsigned CmpMode = 0;
    switch (Cond) {
    default: llvm_unreachable("Unexpected SETCC condition");
    case ISD::SETULT:
    case ISD::SETLT: CmpMode = 0x00; break;
    case ISD::SETULE:
    case ISD::SETLE: CmpMode = 0x01; break;
    case ISD::SETUGT:
    case ISD::SETGT: CmpMode = 0x02; break;
    case ISD::SETUGE:
    case ISD::SETGE: CmpMode = 0x03; break;
    case ISD::SETEQ: CmpMode = 0x04; break;
    case ISD::SETNE: CmpMode = 0x05; break;
    }

    // Are we comparing unsigned or signed integers?
    unsigned Opc =
        ISD::isUnsignedIntSetCC(Cond) ? X86ISD::VPCOMU : X86ISD::VPCOM;

    return DAG.getNode(Opc, dl, VT, Op0, Op1,
                       DAG.getConstant(CmpMode, dl, MVT::i8));
  }

  // (X & Y) != 0 --> (X & Y) == Y iff Y is power-of-2.
  // Revert part of the simplifySetCCWithAnd combine, to avoid an invert.
  if (Cond == ISD::SETNE && ISD::isBuildVectorAllZeros(Op1.getNode())) {
    SDValue BC0 = peekThroughBitcasts(Op0);
    if (BC0.getOpcode() == ISD::AND) {
      APInt UndefElts;
      SmallVector<APInt, 64> EltBits;
      if (getTargetConstantBitsFromNode(BC0.getOperand(1),
                                        VT.getScalarSizeInBits(), UndefElts,
                                        EltBits, false, false)) {
        if (llvm::all_of(EltBits, [](APInt &V) { return V.isPowerOf2(); })) {
          Cond = ISD::SETEQ;
          Op1 = DAG.getBitcast(VT, BC0.getOperand(1));
        }
      }
    }
  }

  // We are handling one of the integer comparisons here. Since SSE only has
  // GT and EQ comparisons for integer, swapping operands and multiple
  // operations may be required for some comparisons.
  unsigned Opc = (Cond == ISD::SETEQ || Cond == ISD::SETNE) ? X86ISD::PCMPEQ
                                                            : X86ISD::PCMPGT;
  bool Swap = Cond == ISD::SETLT || Cond == ISD::SETULT ||
              Cond == ISD::SETGE || Cond == ISD::SETUGE;
  bool Invert = Cond == ISD::SETNE ||
                (Cond != ISD::SETEQ && ISD::isTrueWhenEqual(Cond));

  // If both operands are known non-negative, then an unsigned compare is the
  // same as a signed compare and there's no need to flip signbits.
  // TODO: We could check for more general simplifications here since we're
  // computing known bits.
  bool FlipSigns = ISD::isUnsignedIntSetCC(Cond) &&
                   !(DAG.SignBitIsZero(Op0) && DAG.SignBitIsZero(Op1));

  // Special case: Use min/max operations for SETULE/SETUGE
  MVT VET = VT.getVectorElementType();
  bool HasMinMax =
      (Subtarget.hasSSE41() && (VET >= MVT::i8 && VET <= MVT::i32)) ||
      (Subtarget.hasSSE2() && (VET == MVT::i8));
  bool MinMax = false;
  if (HasMinMax) {
    switch (Cond) {
    default: break;
    case ISD::SETULE: Opc = ISD::UMIN; MinMax = true; break;
    case ISD::SETUGE: Opc = ISD::UMAX; MinMax = true; break;
    }

    if (MinMax)
      Swap = Invert = FlipSigns = false;
  }

  bool HasSubus = Subtarget.hasSSE2() && (VET == MVT::i8 || VET == MVT::i16);
  bool Subus = false;
  if (!MinMax && HasSubus) {
    // As another special case, use PSUBUS[BW] when it's profitable. E.g. for
    // Op0 u<= Op1:
    //   t = psubus Op0, Op1
    //   pcmpeq t, <0..0>
    switch (Cond) {
    default: break;
    case ISD::SETULT: {
      // If the comparison is against a constant we can turn this into a
      // setule.  With psubus, setule does not require a swap.  This is
      // beneficial because the constant in the register is no longer
      // destructed as the destination so it can be hoisted out of a loop.
      // Only do this pre-AVX since vpcmp* is no longer destructive.
      if (Subtarget.hasAVX())
        break;
      if (SDValue ULEOp1 = ChangeVSETULTtoVSETULE(dl, Op1, DAG)) {
        Op1 = ULEOp1;
        Subus = true; Invert = false; Swap = false;
      }
      break;
    }
    // Psubus is better than flip-sign because it requires no inversion.
    case ISD::SETUGE: Subus = true; Invert = false; Swap = true;  break;
    case ISD::SETULE: Subus = true; Invert = false; Swap = false; break;
    }

    if (Subus) {
      Opc = X86ISD::SUBUS;
      FlipSigns = false;
    }
  }

  if (Swap)
    std::swap(Op0, Op1);

  // Check that the operation in question is available (most are plain SSE2,
  // but PCMPGTQ and PCMPEQQ have different requirements).
  if (VT == MVT::v2i64) {
    if (Opc == X86ISD::PCMPGT && !Subtarget.hasSSE42()) {
      assert(Subtarget.hasSSE2() && "Don't know how to lower!");

      // First cast everything to the right type.
      Op0 = DAG.getBitcast(MVT::v4i32, Op0);
      Op1 = DAG.getBitcast(MVT::v4i32, Op1);

      // Since SSE has no unsigned integer comparisons, we need to flip the sign
      // bits of the inputs before performing those operations. The lower
      // compare is always unsigned.
      SDValue SB;
      if (FlipSigns) {
        SB = DAG.getConstant(0x80000000U, dl, MVT::v4i32);
      } else {
        SDValue Sign = DAG.getConstant(0x80000000U, dl, MVT::i32);
        SDValue Zero = DAG.getConstant(0x00000000U, dl, MVT::i32);
        SB = DAG.getBuildVector(MVT::v4i32, dl, {Sign, Zero, Sign, Zero});
      }
      Op0 = DAG.getNode(ISD::XOR, dl, MVT::v4i32, Op0, SB);
      Op1 = DAG.getNode(ISD::XOR, dl, MVT::v4i32, Op1, SB);

      // Emulate PCMPGTQ with (hi1 > hi2) | ((hi1 == hi2) & (lo1 > lo2))
      SDValue GT = DAG.getNode(X86ISD::PCMPGT, dl, MVT::v4i32, Op0, Op1);
      SDValue EQ = DAG.getNode(X86ISD::PCMPEQ, dl, MVT::v4i32, Op0, Op1);

      // Create masks for only the low parts/high parts of the 64 bit integers.
      static const int MaskHi[] = { 1, 1, 3, 3 };
      static const int MaskLo[] = { 0, 0, 2, 2 };
      SDValue EQHi = DAG.getVectorShuffle(MVT::v4i32, dl, EQ, EQ, MaskHi);
      SDValue GTLo = DAG.getVectorShuffle(MVT::v4i32, dl, GT, GT, MaskLo);
      SDValue GTHi = DAG.getVectorShuffle(MVT::v4i32, dl, GT, GT, MaskHi);

      SDValue Result = DAG.getNode(ISD::AND, dl, MVT::v4i32, EQHi, GTLo);
      Result = DAG.getNode(ISD::OR, dl, MVT::v4i32, Result, GTHi);

      if (Invert)
        Result = DAG.getNOT(dl, Result, MVT::v4i32);

      return DAG.getBitcast(VT, Result);
    }

    if (Opc == X86ISD::PCMPEQ && !Subtarget.hasSSE41()) {
      // If pcmpeqq is missing but pcmpeqd is available synthesize pcmpeqq with
      // pcmpeqd + pshufd + pand.
      assert(Subtarget.hasSSE2() && !FlipSigns && "Don't know how to lower!");

      // First cast everything to the right type.
      Op0 = DAG.getBitcast(MVT::v4i32, Op0);
      Op1 = DAG.getBitcast(MVT::v4i32, Op1);

      // Do the compare.
      SDValue Result = DAG.getNode(Opc, dl, MVT::v4i32, Op0, Op1);

      // Make sure the lower and upper halves are both all-ones.
      static const int Mask[] = { 1, 0, 3, 2 };
      SDValue Shuf = DAG.getVectorShuffle(MVT::v4i32, dl, Result, Result, Mask);
      Result = DAG.getNode(ISD::AND, dl, MVT::v4i32, Result, Shuf);

      if (Invert)
        Result = DAG.getNOT(dl, Result, MVT::v4i32);

      return DAG.getBitcast(VT, Result);
    }
  }

  // Since SSE has no unsigned integer comparisons, we need to flip the sign
  // bits of the inputs before performing those operations.
  if (FlipSigns) {
    MVT EltVT = VT.getVectorElementType();
    SDValue SM = DAG.getConstant(APInt::getSignMask(EltVT.getSizeInBits()), dl,
                                 VT);
    Op0 = DAG.getNode(ISD::XOR, dl, VT, Op0, SM);
    Op1 = DAG.getNode(ISD::XOR, dl, VT, Op1, SM);
  }

  SDValue Result = DAG.getNode(Opc, dl, VT, Op0, Op1);

  // If the logical-not of the result is required, perform that now.
  if (Invert)
    Result = DAG.getNOT(dl, Result, VT);

  if (MinMax)
    Result = DAG.getNode(X86ISD::PCMPEQ, dl, VT, Op0, Result);

  if (Subus)
    Result = DAG.getNode(X86ISD::PCMPEQ, dl, VT, Result,
                         getZeroVector(VT, Subtarget, DAG, dl));

  return Result;
}

SDValue X86TargetLowering::LowerSETCC(SDValue Op, SelectionDAG &DAG) const {

  MVT VT = Op.getSimpleValueType();

  if (VT.isVector()) return LowerVSETCC(Op, Subtarget, DAG);

  assert(VT == MVT::i8 && "SetCC type must be 8-bit integer");
  SDValue Op0 = Op.getOperand(0);
  SDValue Op1 = Op.getOperand(1);
  SDLoc dl(Op);
  ISD::CondCode CC = cast<CondCodeSDNode>(Op.getOperand(2))->get();

  // Optimize to BT if possible.
  // Lower (X & (1 << N)) == 0 to BT(X, N).
  // Lower ((X >>u N) & 1) != 0 to BT(X, N).
  // Lower ((X >>s N) & 1) != 0 to BT(X, N).
  if (Op0.getOpcode() == ISD::AND && Op0.hasOneUse() && isNullConstant(Op1) &&
      (CC == ISD::SETEQ || CC == ISD::SETNE)) {
    if (SDValue NewSetCC = LowerAndToBT(Op0, CC, dl, DAG))
      return NewSetCC;
  }

  // Look for X == 0, X == 1, X != 0, or X != 1.  We can simplify some forms of
  // these.
  if ((isOneConstant(Op1) || isNullConstant(Op1)) &&
      (CC == ISD::SETEQ || CC == ISD::SETNE)) {

    // If the input is a setcc, then reuse the input setcc or use a new one with
    // the inverted condition.
    if (Op0.getOpcode() == X86ISD::SETCC) {
      X86::CondCode CCode = (X86::CondCode)Op0.getConstantOperandVal(0);
      bool Invert = (CC == ISD::SETNE) ^ isNullConstant(Op1);
      if (!Invert)
        return Op0;

      CCode = X86::GetOppositeBranchCondition(CCode);
      SDValue SetCC = getSETCC(CCode, Op0.getOperand(1), dl, DAG);
      if (VT == MVT::i1)
        return DAG.getNode(ISD::TRUNCATE, dl, MVT::i1, SetCC);
      return SetCC;
    }
  }
  if (Op0.getValueType() == MVT::i1 && (CC == ISD::SETEQ || CC == ISD::SETNE)) {
    if (isOneConstant(Op1)) {
      ISD::CondCode NewCC = ISD::getSetCCInverse(CC, true);
      return DAG.getSetCC(dl, VT, Op0, DAG.getConstant(0, dl, MVT::i1), NewCC);
    }
    if (!isNullConstant(Op1)) {
      SDValue Xor = DAG.getNode(ISD::XOR, dl, MVT::i1, Op0, Op1);
      return DAG.getSetCC(dl, VT, Xor, DAG.getConstant(0, dl, MVT::i1), CC);
    }
  }

  bool IsFP = Op1.getSimpleValueType().isFloatingPoint();
  X86::CondCode X86CC = TranslateX86CC(CC, dl, IsFP, Op0, Op1, DAG);
  if (X86CC == X86::COND_INVALID)
    return SDValue();

  SDValue EFLAGS = EmitCmp(Op0, Op1, X86CC, dl, DAG);
  EFLAGS = ConvertCmpIfNecessary(EFLAGS, DAG);
  SDValue SetCC = getSETCC(X86CC, EFLAGS, dl, DAG);
  if (VT == MVT::i1)
    return DAG.getNode(ISD::TRUNCATE, dl, MVT::i1, SetCC);
  return SetCC;
}

SDValue X86TargetLowering::LowerSETCCCARRY(SDValue Op, SelectionDAG &DAG) const {
  SDValue LHS = Op.getOperand(0);
  SDValue RHS = Op.getOperand(1);
  SDValue Carry = Op.getOperand(2);
  SDValue Cond = Op.getOperand(3);
  SDLoc DL(Op);

  assert(LHS.getSimpleValueType().isInteger() && "SETCCCARRY is integer only.");
  X86::CondCode CC = TranslateIntegerX86CC(cast<CondCodeSDNode>(Cond)->get());

  // Recreate the carry if needed.
  EVT CarryVT = Carry.getValueType();
  APInt NegOne = APInt::getAllOnesValue(CarryVT.getScalarSizeInBits());
  Carry = DAG.getNode(X86ISD::ADD, DL, DAG.getVTList(CarryVT, MVT::i32),
                      Carry, DAG.getConstant(NegOne, DL, CarryVT));

  SDVTList VTs = DAG.getVTList(LHS.getValueType(), MVT::i32);
  SDValue Cmp = DAG.getNode(X86ISD::SBB, DL, VTs, LHS, RHS, Carry.getValue(1));
  SDValue SetCC = getSETCC(CC, Cmp.getValue(1), DL, DAG);
  if (Op.getSimpleValueType() == MVT::i1)
    return DAG.getNode(ISD::TRUNCATE, DL, MVT::i1, SetCC);
  return SetCC;
}

/// Return true if opcode is a X86 logical comparison.
static bool isX86LogicalCmp(SDValue Op) {
  unsigned Opc = Op.getOpcode();
  if (Opc == X86ISD::CMP || Opc == X86ISD::COMI || Opc == X86ISD::UCOMI ||
      Opc == X86ISD::SAHF)
    return true;
  if (Op.getResNo() == 1 &&
      (Opc == X86ISD::ADD || Opc == X86ISD::SUB || Opc == X86ISD::ADC ||
       Opc == X86ISD::SBB || Opc == X86ISD::SMUL ||
       Opc == X86ISD::INC || Opc == X86ISD::DEC || Opc == X86ISD::OR ||
       Opc == X86ISD::XOR || Opc == X86ISD::AND))
    return true;

  if (Op.getResNo() == 2 && Opc == X86ISD::UMUL)
    return true;

  return false;
}

static bool isTruncWithZeroHighBitsInput(SDValue V, SelectionDAG &DAG) {
  if (V.getOpcode() != ISD::TRUNCATE)
    return false;

  SDValue VOp0 = V.getOperand(0);
  unsigned InBits = VOp0.getValueSizeInBits();
  unsigned Bits = V.getValueSizeInBits();
  return DAG.MaskedValueIsZero(VOp0, APInt::getHighBitsSet(InBits,InBits-Bits));
}

SDValue X86TargetLowering::LowerSELECT(SDValue Op, SelectionDAG &DAG) const {
  bool AddTest = true;
  SDValue Cond  = Op.getOperand(0);
  SDValue Op1 = Op.getOperand(1);
  SDValue Op2 = Op.getOperand(2);
  SDLoc DL(Op);
  MVT VT = Op1.getSimpleValueType();
  SDValue CC;

  // Lower FP selects into a CMP/AND/ANDN/OR sequence when the necessary SSE ops
  // are available or VBLENDV if AVX is available.
  // Otherwise FP cmovs get lowered into a less efficient branch sequence later.
  if (Cond.getOpcode() == ISD::SETCC &&
      ((Subtarget.hasSSE2() && (VT == MVT::f32 || VT == MVT::f64)) ||
       (Subtarget.hasSSE1() && VT == MVT::f32)) &&
      VT == Cond.getOperand(0).getSimpleValueType() && Cond->hasOneUse()) {
    SDValue CondOp0 = Cond.getOperand(0), CondOp1 = Cond.getOperand(1);
    unsigned SSECC = translateX86FSETCC(
        cast<CondCodeSDNode>(Cond.getOperand(2))->get(), CondOp0, CondOp1);

    if (Subtarget.hasAVX512()) {
      SDValue Cmp = DAG.getNode(X86ISD::FSETCCM, DL, MVT::v1i1, CondOp0,
                                CondOp1, DAG.getConstant(SSECC, DL, MVT::i8));
      assert(!VT.isVector() && "Not a scalar type?");
      return DAG.getNode(X86ISD::SELECTS, DL, VT, Cmp, Op1, Op2);
    }

    if (SSECC < 8 || Subtarget.hasAVX()) {
      SDValue Cmp = DAG.getNode(X86ISD::FSETCC, DL, VT, CondOp0, CondOp1,
                                DAG.getConstant(SSECC, DL, MVT::i8));

      // If we have AVX, we can use a variable vector select (VBLENDV) instead
      // of 3 logic instructions for size savings and potentially speed.
      // Unfortunately, there is no scalar form of VBLENDV.

      // If either operand is a constant, don't try this. We can expect to
      // optimize away at least one of the logic instructions later in that
      // case, so that sequence would be faster than a variable blend.

      // BLENDV was introduced with SSE 4.1, but the 2 register form implicitly
      // uses XMM0 as the selection register. That may need just as many
      // instructions as the AND/ANDN/OR sequence due to register moves, so
      // don't bother.

      if (Subtarget.hasAVX() &&
          !isa<ConstantFPSDNode>(Op1) && !isa<ConstantFPSDNode>(Op2)) {

        // Convert to vectors, do a VSELECT, and convert back to scalar.
        // All of the conversions should be optimized away.

        MVT VecVT = VT == MVT::f32 ? MVT::v4f32 : MVT::v2f64;
        SDValue VOp1 = DAG.getNode(ISD::SCALAR_TO_VECTOR, DL, VecVT, Op1);
        SDValue VOp2 = DAG.getNode(ISD::SCALAR_TO_VECTOR, DL, VecVT, Op2);
        SDValue VCmp = DAG.getNode(ISD::SCALAR_TO_VECTOR, DL, VecVT, Cmp);

        MVT VCmpVT = VT == MVT::f32 ? MVT::v4i32 : MVT::v2i64;
        VCmp = DAG.getBitcast(VCmpVT, VCmp);

        SDValue VSel = DAG.getSelect(DL, VecVT, VCmp, VOp1, VOp2);

        return DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, VT,
                           VSel, DAG.getIntPtrConstant(0, DL));
      }
      SDValue AndN = DAG.getNode(X86ISD::FANDN, DL, VT, Cmp, Op2);
      SDValue And = DAG.getNode(X86ISD::FAND, DL, VT, Cmp, Op1);
      return DAG.getNode(X86ISD::FOR, DL, VT, AndN, And);
    }
  }

  // AVX512 fallback is to lower selects of scalar floats to masked moves.
  if ((VT == MVT::f64 || VT == MVT::f32) && Subtarget.hasAVX512()) {
    SDValue Cmp = DAG.getNode(ISD::SCALAR_TO_VECTOR, DL, MVT::v1i1, Cond);
    return DAG.getNode(X86ISD::SELECTS, DL, VT, Cmp, Op1, Op2);
  }

  if (VT.isVector() && VT.getVectorElementType() == MVT::i1) {
    SDValue Op1Scalar;
    if (ISD::isBuildVectorOfConstantSDNodes(Op1.getNode()))
      Op1Scalar = ConvertI1VectorToInteger(Op1, DAG);
    else if (Op1.getOpcode() == ISD::BITCAST && Op1.getOperand(0))
      Op1Scalar = Op1.getOperand(0);
    SDValue Op2Scalar;
    if (ISD::isBuildVectorOfConstantSDNodes(Op2.getNode()))
      Op2Scalar = ConvertI1VectorToInteger(Op2, DAG);
    else if (Op2.getOpcode() == ISD::BITCAST && Op2.getOperand(0))
      Op2Scalar = Op2.getOperand(0);
    if (Op1Scalar.getNode() && Op2Scalar.getNode()) {
      SDValue newSelect = DAG.getSelect(DL, Op1Scalar.getValueType(), Cond,
                                        Op1Scalar, Op2Scalar);
      if (newSelect.getValueSizeInBits() == VT.getSizeInBits())
        return DAG.getBitcast(VT, newSelect);
      SDValue ExtVec = DAG.getBitcast(MVT::v8i1, newSelect);
      return DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, VT, ExtVec,
                         DAG.getIntPtrConstant(0, DL));
    }
  }

  if (VT == MVT::v4i1 || VT == MVT::v2i1) {
    SDValue zeroConst = DAG.getIntPtrConstant(0, DL);
    Op1 = DAG.getNode(ISD::INSERT_SUBVECTOR, DL, MVT::v8i1,
                      DAG.getUNDEF(MVT::v8i1), Op1, zeroConst);
    Op2 = DAG.getNode(ISD::INSERT_SUBVECTOR, DL, MVT::v8i1,
                      DAG.getUNDEF(MVT::v8i1), Op2, zeroConst);
    SDValue newSelect = DAG.getSelect(DL, MVT::v8i1, Cond, Op1, Op2);
    return DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, VT, newSelect, zeroConst);
  }

  if (Cond.getOpcode() == ISD::SETCC) {
    if (SDValue NewCond = LowerSETCC(Cond, DAG)) {
      Cond = NewCond;
      // If the condition was updated, it's possible that the operands of the
      // select were also updated (for example, EmitTest has a RAUW). Refresh
      // the local references to the select operands in case they got stale.
      Op1 = Op.getOperand(1);
      Op2 = Op.getOperand(2);
    }
  }

  // (select (x == 0), -1, y) -> (sign_bit (x - 1)) | y
  // (select (x == 0), y, -1) -> ~(sign_bit (x - 1)) | y
  // (select (x != 0), y, -1) -> (sign_bit (x - 1)) | y
  // (select (x != 0), -1, y) -> ~(sign_bit (x - 1)) | y
  // (select (and (x , 0x1) == 0), y, (z ^ y) ) -> (-(and (x , 0x1)) & z ) ^ y
  // (select (and (x , 0x1) == 0), y, (z | y) ) -> (-(and (x , 0x1)) & z ) | y
  if (Cond.getOpcode() == X86ISD::SETCC &&
      Cond.getOperand(1).getOpcode() == X86ISD::CMP &&
      isNullConstant(Cond.getOperand(1).getOperand(1))) {
    SDValue Cmp = Cond.getOperand(1);
    unsigned CondCode =
        cast<ConstantSDNode>(Cond.getOperand(0))->getZExtValue();

    if ((isAllOnesConstant(Op1) || isAllOnesConstant(Op2)) &&
        (CondCode == X86::COND_E || CondCode == X86::COND_NE)) {
      SDValue Y = isAllOnesConstant(Op2) ? Op1 : Op2;
      SDValue CmpOp0 = Cmp.getOperand(0);

      // Apply further optimizations for special cases
      // (select (x != 0), -1, 0) -> neg & sbb
      // (select (x == 0), 0, -1) -> neg & sbb
      if (isNullConstant(Y) &&
          (isAllOnesConstant(Op1) == (CondCode == X86::COND_NE))) {
        SDVTList VTs = DAG.getVTList(CmpOp0.getValueType(), MVT::i32);
        SDValue Zero = DAG.getConstant(0, DL, CmpOp0.getValueType());
        SDValue Neg = DAG.getNode(X86ISD::SUB, DL, VTs, Zero, CmpOp0);
        SDValue Res = DAG.getNode(X86ISD::SETCC_CARRY, DL, Op.getValueType(),
                                  DAG.getConstant(X86::COND_B, DL, MVT::i8),
                                  SDValue(Neg.getNode(), 1));
        return Res;
      }

      Cmp = DAG.getNode(X86ISD::CMP, DL, MVT::i32,
                        CmpOp0, DAG.getConstant(1, DL, CmpOp0.getValueType()));
      Cmp = ConvertCmpIfNecessary(Cmp, DAG);

      SDValue Res =   // Res = 0 or -1.
        DAG.getNode(X86ISD::SETCC_CARRY, DL, Op.getValueType(),
                    DAG.getConstant(X86::COND_B, DL, MVT::i8), Cmp);

      if (isAllOnesConstant(Op1) != (CondCode == X86::COND_E))
        Res = DAG.getNOT(DL, Res, Res.getValueType());

      if (!isNullConstant(Op2))
        Res = DAG.getNode(ISD::OR, DL, Res.getValueType(), Res, Y);
      return Res;
    } else if (!Subtarget.hasCMov() && CondCode == X86::COND_E &&
               Cmp.getOperand(0).getOpcode() == ISD::AND &&
               isOneConstant(Cmp.getOperand(0).getOperand(1))) {
      SDValue CmpOp0 = Cmp.getOperand(0);
      SDValue Src1, Src2;
      // true if Op2 is XOR or OR operator and one of its operands
      // is equal to Op1
      // ( a , a op b) || ( b , a op b)
      auto isOrXorPattern = [&]() {
        if ((Op2.getOpcode() == ISD::XOR || Op2.getOpcode() == ISD::OR) &&
            (Op2.getOperand(0) == Op1 || Op2.getOperand(1) == Op1)) {
          Src1 =
              Op2.getOperand(0) == Op1 ? Op2.getOperand(1) : Op2.getOperand(0);
          Src2 = Op1;
          return true;
        }
        return false;
      };

      if (isOrXorPattern()) {
        SDValue Neg;
        unsigned int CmpSz = CmpOp0.getSimpleValueType().getSizeInBits();
        // we need mask of all zeros or ones with same size of the other
        // operands.
        if (CmpSz > VT.getSizeInBits())
          Neg = DAG.getNode(ISD::TRUNCATE, DL, VT, CmpOp0);
        else if (CmpSz < VT.getSizeInBits())
          Neg = DAG.getNode(ISD::AND, DL, VT,
              DAG.getNode(ISD::ANY_EXTEND, DL, VT, CmpOp0.getOperand(0)),
              DAG.getConstant(1, DL, VT));
        else
          Neg = CmpOp0;
        SDValue Mask = DAG.getNode(ISD::SUB, DL, VT, DAG.getConstant(0, DL, VT),
                                   Neg); // -(and (x, 0x1))
        SDValue And = DAG.getNode(ISD::AND, DL, VT, Mask, Src1); // Mask & z
        return DAG.getNode(Op2.getOpcode(), DL, VT, And, Src2);  // And Op y
      }
    }
  }

  // Look past (and (setcc_carry (cmp ...)), 1).
  if (Cond.getOpcode() == ISD::AND &&
      Cond.getOperand(0).getOpcode() == X86ISD::SETCC_CARRY &&
      isOneConstant(Cond.getOperand(1)))
    Cond = Cond.getOperand(0);

  // If condition flag is set by a X86ISD::CMP, then use it as the condition
  // setting operand in place of the X86ISD::SETCC.
  unsigned CondOpcode = Cond.getOpcode();
  if (CondOpcode == X86ISD::SETCC ||
      CondOpcode == X86ISD::SETCC_CARRY) {
    CC = Cond.getOperand(0);

    SDValue Cmp = Cond.getOperand(1);
    unsigned Opc = Cmp.getOpcode();
    MVT VT = Op.getSimpleValueType();

    bool IllegalFPCMov = false;
    if (VT.isFloatingPoint() && !VT.isVector() &&
        !isScalarFPTypeInSSEReg(VT))  // FPStack?
      IllegalFPCMov = !hasFPCMov(cast<ConstantSDNode>(CC)->getSExtValue());

    if ((isX86LogicalCmp(Cmp) && !IllegalFPCMov) ||
        Opc == X86ISD::BT) { // FIXME
      Cond = Cmp;
      AddTest = false;
    }
  } else if (CondOpcode == ISD::USUBO || CondOpcode == ISD::SSUBO ||
             CondOpcode == ISD::UADDO || CondOpcode == ISD::SADDO ||
             ((CondOpcode == ISD::UMULO || CondOpcode == ISD::SMULO) &&
              Cond.getOperand(0).getValueType() != MVT::i8)) {
    SDValue LHS = Cond.getOperand(0);
    SDValue RHS = Cond.getOperand(1);
    unsigned X86Opcode;
    unsigned X86Cond;
    SDVTList VTs;
    switch (CondOpcode) {
    case ISD::UADDO: X86Opcode = X86ISD::ADD; X86Cond = X86::COND_B; break;
    case ISD::SADDO: X86Opcode = X86ISD::ADD; X86Cond = X86::COND_O; break;
    case ISD::USUBO: X86Opcode = X86ISD::SUB; X86Cond = X86::COND_B; break;
    case ISD::SSUBO: X86Opcode = X86ISD::SUB; X86Cond = X86::COND_O; break;
    case ISD::UMULO: X86Opcode = X86ISD::UMUL; X86Cond = X86::COND_O; break;
    case ISD::SMULO: X86Opcode = X86ISD::SMUL; X86Cond = X86::COND_O; break;
    default: llvm_unreachable("unexpected overflowing operator");
    }
    if (CondOpcode == ISD::UMULO)
      VTs = DAG.getVTList(LHS.getValueType(), LHS.getValueType(),
                          MVT::i32);
    else
      VTs = DAG.getVTList(LHS.getValueType(), MVT::i32);

    SDValue X86Op = DAG.getNode(X86Opcode, DL, VTs, LHS, RHS);

    if (CondOpcode == ISD::UMULO)
      Cond = X86Op.getValue(2);
    else
      Cond = X86Op.getValue(1);

    CC = DAG.getConstant(X86Cond, DL, MVT::i8);
    AddTest = false;
  }

  if (AddTest) {
    // Look past the truncate if the high bits are known zero.
    if (isTruncWithZeroHighBitsInput(Cond, DAG))
      Cond = Cond.getOperand(0);

    // We know the result of AND is compared against zero. Try to match
    // it to BT.
    if (Cond.getOpcode() == ISD::AND && Cond.hasOneUse()) {
      if (SDValue NewSetCC = LowerAndToBT(Cond, ISD::SETNE, DL, DAG)) {
        CC = NewSetCC.getOperand(0);
        Cond = NewSetCC.getOperand(1);
        AddTest = false;
      }
    }
  }

  if (AddTest) {
    CC = DAG.getConstant(X86::COND_NE, DL, MVT::i8);
    Cond = EmitTest(Cond, X86::COND_NE, DL, DAG);
  }

  // a <  b ? -1 :  0 -> RES = ~setcc_carry
  // a <  b ?  0 : -1 -> RES = setcc_carry
  // a >= b ? -1 :  0 -> RES = setcc_carry
  // a >= b ?  0 : -1 -> RES = ~setcc_carry
  if (Cond.getOpcode() == X86ISD::SUB) {
    Cond = ConvertCmpIfNecessary(Cond, DAG);
    unsigned CondCode = cast<ConstantSDNode>(CC)->getZExtValue();

    if ((CondCode == X86::COND_AE || CondCode == X86::COND_B) &&
        (isAllOnesConstant(Op1) || isAllOnesConstant(Op2)) &&
        (isNullConstant(Op1) || isNullConstant(Op2))) {
      SDValue Res = DAG.getNode(X86ISD::SETCC_CARRY, DL, Op.getValueType(),
                                DAG.getConstant(X86::COND_B, DL, MVT::i8),
                                Cond);
      if (isAllOnesConstant(Op1) != (CondCode == X86::COND_B))
        return DAG.getNOT(DL, Res, Res.getValueType());
      return Res;
    }
  }

  // X86 doesn't have an i8 cmov. If both operands are the result of a truncate
  // widen the cmov and push the truncate through. This avoids introducing a new
  // branch during isel and doesn't add any extensions.
  if (Op.getValueType() == MVT::i8 &&
      Op1.getOpcode() == ISD::TRUNCATE && Op2.getOpcode() == ISD::TRUNCATE) {
    SDValue T1 = Op1.getOperand(0), T2 = Op2.getOperand(0);
    if (T1.getValueType() == T2.getValueType() &&
        // Blacklist CopyFromReg to avoid partial register stalls.
        T1.getOpcode() != ISD::CopyFromReg && T2.getOpcode()!=ISD::CopyFromReg){
      SDValue Cmov = DAG.getNode(X86ISD::CMOV, DL, T1.getValueType(), T2, T1,
                                 CC, Cond);
      return DAG.getNode(ISD::TRUNCATE, DL, Op.getValueType(), Cmov);
    }
  }

  // X86ISD::CMOV means set the result (which is operand 1) to the RHS if
  // condition is true.
  SDValue Ops[] = { Op2, Op1, CC, Cond };
  return DAG.getNode(X86ISD::CMOV, DL, Op.getValueType(), Ops);
}

static SDValue LowerSIGN_EXTEND_AVX512(SDValue Op,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  MVT VT = Op->getSimpleValueType(0);
  SDValue In = Op->getOperand(0);
  MVT InVT = In.getSimpleValueType();
  MVT VTElt = VT.getVectorElementType();
  MVT InVTElt = InVT.getVectorElementType();
  SDLoc dl(Op);

  // SKX processor
  if ((InVTElt == MVT::i1) &&
      (((Subtarget.hasBWI() && VTElt.getSizeInBits() <= 16)) ||

       ((Subtarget.hasDQI() && VTElt.getSizeInBits() >= 32))))

    return DAG.getNode(X86ISD::VSEXT, dl, VT, In);

  unsigned NumElts = VT.getVectorNumElements();

  if (VT.is512BitVector() && InVTElt != MVT::i1 &&
      (NumElts == 8 || NumElts == 16 || Subtarget.hasBWI())) {
    if (In.getOpcode() == X86ISD::VSEXT || In.getOpcode() == X86ISD::VZEXT)
      return getExtendInVec(In.getOpcode(), dl, VT, In.getOperand(0), DAG);
    return getExtendInVec(X86ISD::VSEXT, dl, VT, In, DAG);
  }

  if (InVTElt != MVT::i1)
    return SDValue();

  MVT ExtVT = VT;
  if (!VT.is512BitVector() && !Subtarget.hasVLX()) {
    ExtVT = MVT::getVectorVT(MVT::getIntegerVT(512/NumElts), NumElts);
  } else if (VTElt == MVT::i16 || VTElt == MVT::i8) {
    // If we don't have BWI support we need to extend 8/16-bit to 32-bit.
    // Otherwise we end up with vselects we can't handle.
    ExtVT = MVT::getVectorVT(MVT::i32, NumElts);
  }

  SDValue V;
  if (Subtarget.hasDQI()) {
    V = getExtendInVec(X86ISD::VSEXT, dl, ExtVT, In, DAG);
    assert(!VT.is512BitVector() && "Unexpected vector type");
  } else {
    SDValue NegOne = getOnesVector(ExtVT, DAG, dl);
    SDValue Zero = getZeroVector(ExtVT, Subtarget, DAG, dl);
    V = DAG.getSelect(dl, ExtVT, In, NegOne, Zero);
    if (ExtVT == VT)
      return V;
  }

  return DAG.getNode(X86ISD::VTRUNC, dl, VT, V);
}

// Lowering for SIGN_EXTEND_VECTOR_INREG and ZERO_EXTEND_VECTOR_INREG.
// For sign extend this needs to handle all vector sizes and SSE4.1 and
// non-SSE4.1 targets. For zero extend this should only handle inputs of
// MVT::v64i8 when BWI is not supported, but AVX512 is.
static SDValue LowerEXTEND_VECTOR_INREG(SDValue Op,
                                        const X86Subtarget &Subtarget,
                                        SelectionDAG &DAG) {
  SDValue In = Op->getOperand(0);
  MVT VT = Op->getSimpleValueType(0);
  MVT InVT = In.getSimpleValueType();
  assert(VT.getSizeInBits() == InVT.getSizeInBits());

  MVT SVT = VT.getVectorElementType();
  MVT InSVT = InVT.getVectorElementType();
  assert(SVT.getSizeInBits() > InSVT.getSizeInBits());

  if (SVT != MVT::i64 && SVT != MVT::i32 && SVT != MVT::i16)
    return SDValue();
  if (InSVT != MVT::i32 && InSVT != MVT::i16 && InSVT != MVT::i8)
    return SDValue();
  if (!(VT.is128BitVector() && Subtarget.hasSSE2()) &&
      !(VT.is256BitVector() && Subtarget.hasInt256()) &&
      !(VT.is512BitVector() && Subtarget.hasAVX512()))
    return SDValue();

  SDLoc dl(Op);

  // For 256-bit vectors, we only need the lower (128-bit) half of the input.
  // For 512-bit vectors, we need 128-bits or 256-bits.
  if (VT.getSizeInBits() > 128) {
    // Input needs to be at least the same number of elements as output, and
    // at least 128-bits.
    int InSize = InSVT.getSizeInBits() * VT.getVectorNumElements();
    In = extractSubVector(In, 0, DAG, dl, std::max(InSize, 128));
  }

  assert((Op.getOpcode() != ISD::ZERO_EXTEND_VECTOR_INREG ||
          InVT == MVT::v64i8) && "Zero extend only for v64i8 input!");

  // SSE41 targets can use the pmovsx* instructions directly for 128-bit results,
  // so are legal and shouldn't occur here. AVX2/AVX512 pmovsx* instructions still
  // need to be handled here for 256/512-bit results.
  if (Subtarget.hasInt256()) {
    assert(VT.getSizeInBits() > 128 && "Unexpected 128-bit vector extension");
    unsigned ExtOpc = Op.getOpcode() == ISD::SIGN_EXTEND_VECTOR_INREG ?
                        X86ISD::VSEXT : X86ISD::VZEXT;
    return DAG.getNode(ExtOpc, dl, VT, In);
  }

  // We should only get here for sign extend.
  assert(Op.getOpcode() == ISD::SIGN_EXTEND_VECTOR_INREG &&
         "Unexpected opcode!");

  // pre-SSE41 targets unpack lower lanes and then sign-extend using SRAI.
  SDValue Curr = In;
  MVT CurrVT = InVT;

  // As SRAI is only available on i16/i32 types, we expand only up to i32
  // and handle i64 separately.
  while (CurrVT != VT && CurrVT.getVectorElementType() != MVT::i32) {
    Curr = DAG.getNode(X86ISD::UNPCKL, dl, CurrVT, DAG.getUNDEF(CurrVT), Curr);
    MVT CurrSVT = MVT::getIntegerVT(CurrVT.getScalarSizeInBits() * 2);
    CurrVT = MVT::getVectorVT(CurrSVT, CurrVT.getVectorNumElements() / 2);
    Curr = DAG.getBitcast(CurrVT, Curr);
  }

  SDValue SignExt = Curr;
  if (CurrVT != InVT) {
    unsigned SignExtShift =
        CurrVT.getScalarSizeInBits() - InSVT.getSizeInBits();
    SignExt = DAG.getNode(X86ISD::VSRAI, dl, CurrVT, Curr,
                          DAG.getConstant(SignExtShift, dl, MVT::i8));
  }

  if (CurrVT == VT)
    return SignExt;

  if (VT == MVT::v2i64 && CurrVT == MVT::v4i32) {
    SDValue Sign = DAG.getNode(X86ISD::VSRAI, dl, CurrVT, Curr,
                               DAG.getConstant(31, dl, MVT::i8));
    SDValue Ext = DAG.getVectorShuffle(CurrVT, dl, SignExt, Sign, {0, 4, 1, 5});
    return DAG.getBitcast(VT, Ext);
  }

  return SDValue();
}

static SDValue LowerSIGN_EXTEND(SDValue Op, const X86Subtarget &Subtarget,
                                SelectionDAG &DAG) {
  MVT VT = Op->getSimpleValueType(0);
  SDValue In = Op->getOperand(0);
  MVT InVT = In.getSimpleValueType();
  SDLoc dl(Op);

  if (VT.is512BitVector() || InVT.getVectorElementType() == MVT::i1)
    return LowerSIGN_EXTEND_AVX512(Op, Subtarget, DAG);

  if ((VT != MVT::v4i64 || InVT != MVT::v4i32) &&
      (VT != MVT::v8i32 || InVT != MVT::v8i16) &&
      (VT != MVT::v16i16 || InVT != MVT::v16i8))
    return SDValue();

  if (Subtarget.hasInt256())
    return DAG.getNode(X86ISD::VSEXT, dl, VT, In);

  // Optimize vectors in AVX mode
  // Sign extend  v8i16 to v8i32 and
  //              v4i32 to v4i64
  //
  // Divide input vector into two parts
  // for v4i32 the shuffle mask will be { 0, 1, -1, -1} {2, 3, -1, -1}
  // use vpmovsx instruction to extend v4i32 -> v2i64; v8i16 -> v4i32
  // concat the vectors to original VT

  unsigned NumElems = InVT.getVectorNumElements();
  SDValue Undef = DAG.getUNDEF(InVT);

  SmallVector<int,8> ShufMask1(NumElems, -1);
  for (unsigned i = 0; i != NumElems/2; ++i)
    ShufMask1[i] = i;

  SDValue OpLo = DAG.getVectorShuffle(InVT, dl, In, Undef, ShufMask1);

  SmallVector<int,8> ShufMask2(NumElems, -1);
  for (unsigned i = 0; i != NumElems/2; ++i)
    ShufMask2[i] = i + NumElems/2;

  SDValue OpHi = DAG.getVectorShuffle(InVT, dl, In, Undef, ShufMask2);

  MVT HalfVT = MVT::getVectorVT(VT.getVectorElementType(),
                                VT.getVectorNumElements() / 2);

  OpLo = DAG.getSignExtendVectorInReg(OpLo, dl, HalfVT);
  OpHi = DAG.getSignExtendVectorInReg(OpHi, dl, HalfVT);

  return DAG.getNode(ISD::CONCAT_VECTORS, dl, VT, OpLo, OpHi);
}

// Lower truncating store. We need a special lowering to vXi1 vectors
static SDValue LowerTruncatingStore(SDValue StOp, const X86Subtarget &Subtarget,
                                    SelectionDAG &DAG) {
  StoreSDNode *St = cast<StoreSDNode>(StOp.getNode());
  SDLoc dl(St);
  EVT MemVT = St->getMemoryVT();
  assert(St->isTruncatingStore() && "We only custom truncating store.");
  assert(MemVT.isVector() && MemVT.getVectorElementType() == MVT::i1 &&
         "Expected truncstore of i1 vector");

  SDValue Op = St->getValue();
  MVT OpVT = Op.getValueType().getSimpleVT();
  unsigned NumElts = OpVT.getVectorNumElements();
  if ((Subtarget.hasVLX() && Subtarget.hasBWI() && Subtarget.hasDQI()) ||
      NumElts == 16) {
    // Truncate and store - everything is legal
    Op = DAG.getNode(ISD::TRUNCATE, dl, MemVT, Op);
    if (MemVT.getSizeInBits() < 8)
      Op = DAG.getNode(ISD::INSERT_SUBVECTOR, dl, MVT::v8i1,
                       DAG.getUNDEF(MVT::v8i1), Op,
                       DAG.getIntPtrConstant(0, dl));
    return DAG.getStore(St->getChain(), dl, Op, St->getBasePtr(),
                        St->getMemOperand());
  }

  // A subset, assume that we have only AVX-512F
  if (NumElts <= 8) {
    if (NumElts < 8) {
      // Extend to 8-elts vector
      MVT ExtVT = MVT::getVectorVT(OpVT.getScalarType(), 8);
      Op = DAG.getNode(ISD::INSERT_SUBVECTOR, dl, ExtVT,
                        DAG.getUNDEF(ExtVT), Op, DAG.getIntPtrConstant(0, dl));
    }
    Op = DAG.getNode(ISD::TRUNCATE, dl, MVT::v8i1, Op);
    return DAG.getStore(St->getChain(), dl, Op, St->getBasePtr(),
                        St->getMemOperand());
  }
  // v32i8
  assert(OpVT == MVT::v32i8 && "Unexpected operand type");
  // Divide the vector into 2 parts and store each part separately
  SDValue Lo = DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl, MVT::v16i8, Op,
                            DAG.getIntPtrConstant(0, dl));
  Lo = DAG.getNode(ISD::TRUNCATE, dl, MVT::v16i1, Lo);
  SDValue BasePtr = St->getBasePtr();
  SDValue StLo = DAG.getStore(St->getChain(), dl, Lo, BasePtr,
                              St->getMemOperand());
  SDValue Hi = DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl, MVT::v16i8, Op,
                            DAG.getIntPtrConstant(16, dl));
  Hi = DAG.getNode(ISD::TRUNCATE, dl, MVT::v16i1, Hi);

  SDValue BasePtrHi =
    DAG.getNode(ISD::ADD, dl, BasePtr.getValueType(), BasePtr,
                DAG.getConstant(2, dl, BasePtr.getValueType()));

  SDValue StHi = DAG.getStore(St->getChain(), dl, Hi,
                              BasePtrHi, St->getMemOperand());
  return DAG.getNode(ISD::TokenFactor, dl, MVT::Other, StLo, StHi);
}

static SDValue LowerExtended1BitVectorLoad(SDValue Op,
                                           const X86Subtarget &Subtarget,
                                           SelectionDAG &DAG) {

  LoadSDNode *Ld = cast<LoadSDNode>(Op.getNode());
  SDLoc dl(Ld);
  EVT MemVT = Ld->getMemoryVT();
  assert(MemVT.isVector() && MemVT.getScalarType() == MVT::i1 &&
         "Expected i1 vector load");
  unsigned ExtOpcode = Ld->getExtensionType() == ISD::ZEXTLOAD ?
    ISD::ZERO_EXTEND : ISD::SIGN_EXTEND;
  MVT VT = Op.getValueType().getSimpleVT();
  unsigned NumElts = VT.getVectorNumElements();

  if ((Subtarget.hasBWI() && NumElts >= 32) ||
      (Subtarget.hasDQI() && NumElts < 16) ||
      NumElts == 16) {
    // Load and extend - everything is legal
    if (NumElts < 8) {
      SDValue Load = DAG.getLoad(MVT::v8i1, dl, Ld->getChain(),
                                 Ld->getBasePtr(),
                                 Ld->getMemOperand());
      // Replace chain users with the new chain.
      assert(Load->getNumValues() == 2 && "Loads must carry a chain!");
      DAG.ReplaceAllUsesOfValueWith(SDValue(Ld, 1), Load.getValue(1));
      MVT ExtVT = MVT::getVectorVT(VT.getScalarType(), 8);
      SDValue ExtVec = DAG.getNode(ExtOpcode, dl, ExtVT, Load);

      return DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl, VT, ExtVec,
                                   DAG.getIntPtrConstant(0, dl));
    }
    SDValue Load = DAG.getLoad(MemVT, dl, Ld->getChain(),
                               Ld->getBasePtr(),
                               Ld->getMemOperand());
    // Replace chain users with the new chain.
    assert(Load->getNumValues() == 2 && "Loads must carry a chain!");
    DAG.ReplaceAllUsesOfValueWith(SDValue(Ld, 1), Load.getValue(1));

    // Finally, do a normal sign-extend to the desired register.
    return DAG.getNode(ExtOpcode, dl, Op.getValueType(), Load);
  }

  if (NumElts <= 8) {
    // A subset, assume that we have only AVX-512F
    unsigned NumBitsToLoad = 8;
    MVT TypeToLoad = MVT::getIntegerVT(NumBitsToLoad);
    SDValue Load = DAG.getLoad(TypeToLoad, dl, Ld->getChain(),
                              Ld->getBasePtr(),
                              Ld->getMemOperand());
    // Replace chain users with the new chain.
    assert(Load->getNumValues() == 2 && "Loads must carry a chain!");
    DAG.ReplaceAllUsesOfValueWith(SDValue(Ld, 1), Load.getValue(1));

    MVT MaskVT = MVT::getVectorVT(MVT::i1, NumBitsToLoad);
    SDValue BitVec = DAG.getBitcast(MaskVT, Load);

    if (NumElts == 8)
      return DAG.getNode(ExtOpcode, dl, VT, BitVec);

      // we should take care to v4i1 and v2i1

    MVT ExtVT = MVT::getVectorVT(VT.getScalarType(), 8);
    SDValue ExtVec = DAG.getNode(ExtOpcode, dl, ExtVT, BitVec);
    return DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl, VT, ExtVec,
                        DAG.getIntPtrConstant(0, dl));
  }

  assert(VT == MVT::v32i8 && "Unexpected extload type");

  SmallVector<SDValue, 2> Chains;

  SDValue BasePtr = Ld->getBasePtr();
  SDValue LoadLo = DAG.getLoad(MVT::v16i1, dl, Ld->getChain(),
                               Ld->getBasePtr(),
                               Ld->getMemOperand());
  Chains.push_back(LoadLo.getValue(1));

  SDValue BasePtrHi =
    DAG.getNode(ISD::ADD, dl, BasePtr.getValueType(), BasePtr,
                DAG.getConstant(2, dl, BasePtr.getValueType()));

  SDValue LoadHi = DAG.getLoad(MVT::v16i1, dl, Ld->getChain(),
                               BasePtrHi,
                               Ld->getMemOperand());
  Chains.push_back(LoadHi.getValue(1));
  SDValue NewChain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, Chains);
  DAG.ReplaceAllUsesOfValueWith(SDValue(Ld, 1), NewChain);

  SDValue Lo = DAG.getNode(ExtOpcode, dl, MVT::v16i8, LoadLo);
  SDValue Hi = DAG.getNode(ExtOpcode, dl, MVT::v16i8, LoadHi);
  return DAG.getNode(ISD::CONCAT_VECTORS, dl, MVT::v32i8, Lo, Hi);
}

// Lower vector extended loads using a shuffle. If SSSE3 is not available we
// may emit an illegal shuffle but the expansion is still better than scalar
// code. We generate X86ISD::VSEXT for SEXTLOADs if it's available, otherwise
// we'll emit a shuffle and a arithmetic shift.
// FIXME: Is the expansion actually better than scalar code? It doesn't seem so.
// TODO: It is possible to support ZExt by zeroing the undef values during
// the shuffle phase or after the shuffle.
static SDValue LowerExtendedLoad(SDValue Op, const X86Subtarget &Subtarget,
                                 SelectionDAG &DAG) {
  MVT RegVT = Op.getSimpleValueType();
  assert(RegVT.isVector() && "We only custom lower vector sext loads.");
  assert(RegVT.isInteger() &&
         "We only custom lower integer vector sext loads.");

  // Nothing useful we can do without SSE2 shuffles.
  assert(Subtarget.hasSSE2() && "We only custom lower sext loads with SSE2.");

  LoadSDNode *Ld = cast<LoadSDNode>(Op.getNode());
  SDLoc dl(Ld);
  EVT MemVT = Ld->getMemoryVT();
  if (MemVT.getScalarType() == MVT::i1)
    return LowerExtended1BitVectorLoad(Op, Subtarget, DAG);

  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  unsigned RegSz = RegVT.getSizeInBits();

  ISD::LoadExtType Ext = Ld->getExtensionType();

  assert((Ext == ISD::EXTLOAD || Ext == ISD::SEXTLOAD)
         && "Only anyext and sext are currently implemented.");
  assert(MemVT != RegVT && "Cannot extend to the same type");
  assert(MemVT.isVector() && "Must load a vector from memory");

  unsigned NumElems = RegVT.getVectorNumElements();
  unsigned MemSz = MemVT.getSizeInBits();
  assert(RegSz > MemSz && "Register size must be greater than the mem size");

  if (Ext == ISD::SEXTLOAD && RegSz == 256 && !Subtarget.hasInt256()) {
    // The only way in which we have a legal 256-bit vector result but not the
    // integer 256-bit operations needed to directly lower a sextload is if we
    // have AVX1 but not AVX2. In that case, we can always emit a sextload to
    // a 128-bit vector and a normal sign_extend to 256-bits that should get
    // correctly legalized. We do this late to allow the canonical form of
    // sextload to persist throughout the rest of the DAG combiner -- it wants
    // to fold together any extensions it can, and so will fuse a sign_extend
    // of an sextload into a sextload targeting a wider value.
    SDValue Load;
    if (MemSz == 128) {
      // Just switch this to a normal load.
      assert(TLI.isTypeLegal(MemVT) && "If the memory type is a 128-bit type, "
                                       "it must be a legal 128-bit vector "
                                       "type!");
      Load = DAG.getLoad(MemVT, dl, Ld->getChain(), Ld->getBasePtr(),
                         Ld->getPointerInfo(), Ld->getAlignment(),
                         Ld->getMemOperand()->getFlags());
    } else {
      assert(MemSz < 128 &&
             "Can't extend a type wider than 128 bits to a 256 bit vector!");
      // Do an sext load to a 128-bit vector type. We want to use the same
      // number of elements, but elements half as wide. This will end up being
      // recursively lowered by this routine, but will succeed as we definitely
      // have all the necessary features if we're using AVX1.
      EVT HalfEltVT =
          EVT::getIntegerVT(*DAG.getContext(), RegVT.getScalarSizeInBits() / 2);
      EVT HalfVecVT = EVT::getVectorVT(*DAG.getContext(), HalfEltVT, NumElems);
      Load =
          DAG.getExtLoad(Ext, dl, HalfVecVT, Ld->getChain(), Ld->getBasePtr(),
                         Ld->getPointerInfo(), MemVT, Ld->getAlignment(),
                         Ld->getMemOperand()->getFlags());
    }

    // Replace chain users with the new chain.
    assert(Load->getNumValues() == 2 && "Loads must carry a chain!");
    DAG.ReplaceAllUsesOfValueWith(SDValue(Ld, 1), Load.getValue(1));

    // Finally, do a normal sign-extend to the desired register.
    return DAG.getSExtOrTrunc(Load, dl, RegVT);
  }

  // All sizes must be a power of two.
  assert(isPowerOf2_32(RegSz * MemSz * NumElems) &&
         "Non-power-of-two elements are not custom lowered!");

  // Attempt to load the original value using scalar loads.
  // Find the largest scalar type that divides the total loaded size.
  MVT SclrLoadTy = MVT::i8;
  for (MVT Tp : MVT::integer_valuetypes()) {
    if (TLI.isTypeLegal(Tp) && ((MemSz % Tp.getSizeInBits()) == 0)) {
      SclrLoadTy = Tp;
    }
  }

  // On 32bit systems, we can't save 64bit integers. Try bitcasting to F64.
  if (TLI.isTypeLegal(MVT::f64) && SclrLoadTy.getSizeInBits() < 64 &&
      (64 <= MemSz))
    SclrLoadTy = MVT::f64;

  // Calculate the number of scalar loads that we need to perform
  // in order to load our vector from memory.
  unsigned NumLoads = MemSz / SclrLoadTy.getSizeInBits();

  assert((Ext != ISD::SEXTLOAD || NumLoads == 1) &&
         "Can only lower sext loads with a single scalar load!");

  unsigned loadRegZize = RegSz;
  if (Ext == ISD::SEXTLOAD && RegSz >= 256)
    loadRegZize = 128;

  // If we don't have BWI we won't be able to create the shuffle needed for
  // v8i8->v8i64.
  if (Ext == ISD::EXTLOAD && !Subtarget.hasBWI() && RegVT == MVT::v8i64 &&
      MemVT == MVT::v8i8)
    loadRegZize = 128;

  // Represent our vector as a sequence of elements which are the
  // largest scalar that we can load.
  EVT LoadUnitVecVT = EVT::getVectorVT(
      *DAG.getContext(), SclrLoadTy, loadRegZize / SclrLoadTy.getSizeInBits());

  // Represent the data using the same element type that is stored in
  // memory. In practice, we ''widen'' MemVT.
  EVT WideVecVT =
      EVT::getVectorVT(*DAG.getContext(), MemVT.getScalarType(),
                       loadRegZize / MemVT.getScalarSizeInBits());

  assert(WideVecVT.getSizeInBits() == LoadUnitVecVT.getSizeInBits() &&
         "Invalid vector type");

  // We can't shuffle using an illegal type.
  assert(TLI.isTypeLegal(WideVecVT) &&
         "We only lower types that form legal widened vector types");

  SmallVector<SDValue, 8> Chains;
  SDValue Ptr = Ld->getBasePtr();
  SDValue Increment = DAG.getConstant(SclrLoadTy.getSizeInBits() / 8, dl,
                                      TLI.getPointerTy(DAG.getDataLayout()));
  SDValue Res = DAG.getUNDEF(LoadUnitVecVT);

  for (unsigned i = 0; i < NumLoads; ++i) {
    // Perform a single load.
    SDValue ScalarLoad =
        DAG.getLoad(SclrLoadTy, dl, Ld->getChain(), Ptr, Ld->getPointerInfo(),
                    Ld->getAlignment(), Ld->getMemOperand()->getFlags());
    Chains.push_back(ScalarLoad.getValue(1));
    // Create the first element type using SCALAR_TO_VECTOR in order to avoid
    // another round of DAGCombining.
    if (i == 0)
      Res = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, LoadUnitVecVT, ScalarLoad);
    else
      Res = DAG.getNode(ISD::INSERT_VECTOR_ELT, dl, LoadUnitVecVT, Res,
                        ScalarLoad, DAG.getIntPtrConstant(i, dl));

    Ptr = DAG.getNode(ISD::ADD, dl, Ptr.getValueType(), Ptr, Increment);
  }

  SDValue TF = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, Chains);

  // Bitcast the loaded value to a vector of the original element type, in
  // the size of the target vector type.
  SDValue SlicedVec = DAG.getBitcast(WideVecVT, Res);
  unsigned SizeRatio = RegSz / MemSz;

  if (Ext == ISD::SEXTLOAD) {
    // If we have SSE4.1, we can directly emit a VSEXT node.
    if (Subtarget.hasSSE41()) {
      SDValue Sext = getExtendInVec(X86ISD::VSEXT, dl, RegVT, SlicedVec, DAG);
      DAG.ReplaceAllUsesOfValueWith(SDValue(Ld, 1), TF);
      return Sext;
    }

    // Otherwise we'll use SIGN_EXTEND_VECTOR_INREG to sign extend the lowest
    // lanes.
    assert(TLI.isOperationLegalOrCustom(ISD::SIGN_EXTEND_VECTOR_INREG, RegVT) &&
           "We can't implement a sext load without SIGN_EXTEND_VECTOR_INREG!");

    SDValue Shuff = DAG.getSignExtendVectorInReg(SlicedVec, dl, RegVT);
    DAG.ReplaceAllUsesOfValueWith(SDValue(Ld, 1), TF);
    return Shuff;
  }

  if (Ext == ISD::EXTLOAD && !Subtarget.hasBWI() && RegVT == MVT::v8i64 &&
      MemVT == MVT::v8i8) {
    SDValue Sext = getExtendInVec(X86ISD::VZEXT, dl, RegVT, SlicedVec, DAG);
    DAG.ReplaceAllUsesOfValueWith(SDValue(Ld, 1), TF);
    return Sext;
  }

  // Redistribute the loaded elements into the different locations.
  SmallVector<int, 16> ShuffleVec(NumElems * SizeRatio, -1);
  for (unsigned i = 0; i != NumElems; ++i)
    ShuffleVec[i * SizeRatio] = i;

  SDValue Shuff = DAG.getVectorShuffle(WideVecVT, dl, SlicedVec,
                                       DAG.getUNDEF(WideVecVT), ShuffleVec);

  // Bitcast to the requested type.
  Shuff = DAG.getBitcast(RegVT, Shuff);
  DAG.ReplaceAllUsesOfValueWith(SDValue(Ld, 1), TF);
  return Shuff;
}

/// Return true if node is an ISD::AND or ISD::OR of two X86ISD::SETCC nodes
/// each of which has no other use apart from the AND / OR.
static bool isAndOrOfSetCCs(SDValue Op, unsigned &Opc) {
  Opc = Op.getOpcode();
  if (Opc != ISD::OR && Opc != ISD::AND)
    return false;
  return (Op.getOperand(0).getOpcode() == X86ISD::SETCC &&
          Op.getOperand(0).hasOneUse() &&
          Op.getOperand(1).getOpcode() == X86ISD::SETCC &&
          Op.getOperand(1).hasOneUse());
}

/// Return true if node is an ISD::XOR of a X86ISD::SETCC and 1 and that the
/// SETCC node has a single use.
static bool isXor1OfSetCC(SDValue Op) {
  if (Op.getOpcode() != ISD::XOR)
    return false;
  if (isOneConstant(Op.getOperand(1)))
    return Op.getOperand(0).getOpcode() == X86ISD::SETCC &&
           Op.getOperand(0).hasOneUse();
  return false;
}

SDValue X86TargetLowering::LowerBRCOND(SDValue Op, SelectionDAG &DAG) const {
  bool addTest = true;
  SDValue Chain = Op.getOperand(0);
  SDValue Cond  = Op.getOperand(1);
  SDValue Dest  = Op.getOperand(2);
  SDLoc dl(Op);
  SDValue CC;
  bool Inverted = false;

  if (Cond.getOpcode() == ISD::SETCC) {
    // Check for setcc([su]{add,sub,mul}o == 0).
    if (cast<CondCodeSDNode>(Cond.getOperand(2))->get() == ISD::SETEQ &&
        isNullConstant(Cond.getOperand(1)) &&
        Cond.getOperand(0).getResNo() == 1 &&
        (Cond.getOperand(0).getOpcode() == ISD::SADDO ||
         Cond.getOperand(0).getOpcode() == ISD::UADDO ||
         Cond.getOperand(0).getOpcode() == ISD::SSUBO ||
         Cond.getOperand(0).getOpcode() == ISD::USUBO ||
         Cond.getOperand(0).getOpcode() == ISD::SMULO ||
         Cond.getOperand(0).getOpcode() == ISD::UMULO)) {
      Inverted = true;
      Cond = Cond.getOperand(0);
    } else {
      if (SDValue NewCond = LowerSETCC(Cond, DAG))
        Cond = NewCond;
    }
  }
#if 0
  // FIXME: LowerXALUO doesn't handle these!!
  else if (Cond.getOpcode() == X86ISD::ADD  ||
           Cond.getOpcode() == X86ISD::SUB  ||
           Cond.getOpcode() == X86ISD::SMUL ||
           Cond.getOpcode() == X86ISD::UMUL)
    Cond = LowerXALUO(Cond, DAG);
#endif

  // Look pass (and (setcc_carry (cmp ...)), 1).
  if (Cond.getOpcode() == ISD::AND &&
      Cond.getOperand(0).getOpcode() == X86ISD::SETCC_CARRY &&
      isOneConstant(Cond.getOperand(1)))
    Cond = Cond.getOperand(0);

  // If condition flag is set by a X86ISD::CMP, then use it as the condition
  // setting operand in place of the X86ISD::SETCC.
  unsigned CondOpcode = Cond.getOpcode();
  if (CondOpcode == X86ISD::SETCC ||
      CondOpcode == X86ISD::SETCC_CARRY) {
    CC = Cond.getOperand(0);

    SDValue Cmp = Cond.getOperand(1);
    unsigned Opc = Cmp.getOpcode();
    // FIXME: WHY THE SPECIAL CASING OF LogicalCmp??
    if (isX86LogicalCmp(Cmp) || Opc == X86ISD::BT) {
      Cond = Cmp;
      addTest = false;
    } else {
      switch (cast<ConstantSDNode>(CC)->getZExtValue()) {
      default: break;
      case X86::COND_O:
      case X86::COND_B:
        // These can only come from an arithmetic instruction with overflow,
        // e.g. SADDO, UADDO.
        Cond = Cond.getOperand(1);
        addTest = false;
        break;
      }
    }
  }
  CondOpcode = Cond.getOpcode();
  if (CondOpcode == ISD::UADDO || CondOpcode == ISD::SADDO ||
      CondOpcode == ISD::USUBO || CondOpcode == ISD::SSUBO ||
      ((CondOpcode == ISD::UMULO || CondOpcode == ISD::SMULO) &&
       Cond.getOperand(0).getValueType() != MVT::i8)) {
    SDValue LHS = Cond.getOperand(0);
    SDValue RHS = Cond.getOperand(1);
    unsigned X86Opcode;
    unsigned X86Cond;
    SDVTList VTs;
    // Keep this in sync with LowerXALUO, otherwise we might create redundant
    // instructions that can't be removed afterwards (i.e. X86ISD::ADD and
    // X86ISD::INC).
    switch (CondOpcode) {
    case ISD::UADDO: X86Opcode = X86ISD::ADD; X86Cond = X86::COND_B; break;
    case ISD::SADDO:
      if (isOneConstant(RHS)) {
          X86Opcode = X86ISD::INC; X86Cond = X86::COND_O;
          break;
        }
      X86Opcode = X86ISD::ADD; X86Cond = X86::COND_O; break;
    case ISD::USUBO: X86Opcode = X86ISD::SUB; X86Cond = X86::COND_B; break;
    case ISD::SSUBO:
      if (isOneConstant(RHS)) {
          X86Opcode = X86ISD::DEC; X86Cond = X86::COND_O;
          break;
        }
      X86Opcode = X86ISD::SUB; X86Cond = X86::COND_O; break;
    case ISD::UMULO: X86Opcode = X86ISD::UMUL; X86Cond = X86::COND_O; break;
    case ISD::SMULO: X86Opcode = X86ISD::SMUL; X86Cond = X86::COND_O; break;
    default: llvm_unreachable("unexpected overflowing operator");
    }
    if (Inverted)
      X86Cond = X86::GetOppositeBranchCondition((X86::CondCode)X86Cond);
    if (CondOpcode == ISD::UMULO)
      VTs = DAG.getVTList(LHS.getValueType(), LHS.getValueType(),
                          MVT::i32);
    else
      VTs = DAG.getVTList(LHS.getValueType(), MVT::i32);

    SDValue X86Op = DAG.getNode(X86Opcode, dl, VTs, LHS, RHS);

    if (CondOpcode == ISD::UMULO)
      Cond = X86Op.getValue(2);
    else
      Cond = X86Op.getValue(1);

    CC = DAG.getConstant(X86Cond, dl, MVT::i8);
    addTest = false;
  } else {
    unsigned CondOpc;
    if (Cond.hasOneUse() && isAndOrOfSetCCs(Cond, CondOpc)) {
      SDValue Cmp = Cond.getOperand(0).getOperand(1);
      if (CondOpc == ISD::OR) {
        // Also, recognize the pattern generated by an FCMP_UNE. We can emit
        // two branches instead of an explicit OR instruction with a
        // separate test.
        if (Cmp == Cond.getOperand(1).getOperand(1) &&
            isX86LogicalCmp(Cmp)) {
          CC = Cond.getOperand(0).getOperand(0);
          Chain = DAG.getNode(X86ISD::BRCOND, dl, Op.getValueType(),
                              Chain, Dest, CC, Cmp);
          CC = Cond.getOperand(1).getOperand(0);
          Cond = Cmp;
          addTest = false;
        }
      } else { // ISD::AND
        // Also, recognize the pattern generated by an FCMP_OEQ. We can emit
        // two branches instead of an explicit AND instruction with a
        // separate test. However, we only do this if this block doesn't
        // have a fall-through edge, because this requires an explicit
        // jmp when the condition is false.
        if (Cmp == Cond.getOperand(1).getOperand(1) &&
            isX86LogicalCmp(Cmp) &&
            Op.getNode()->hasOneUse()) {
          X86::CondCode CCode =
            (X86::CondCode)Cond.getOperand(0).getConstantOperandVal(0);
          CCode = X86::GetOppositeBranchCondition(CCode);
          CC = DAG.getConstant(CCode, dl, MVT::i8);
          SDNode *User = *Op.getNode()->use_begin();
          // Look for an unconditional branch following this conditional branch.
          // We need this because we need to reverse the successors in order
          // to implement FCMP_OEQ.
          if (User->getOpcode() == ISD::BR) {
            SDValue FalseBB = User->getOperand(1);
            SDNode *NewBR =
              DAG.UpdateNodeOperands(User, User->getOperand(0), Dest);
            assert(NewBR == User);
            (void)NewBR;
            Dest = FalseBB;

            Chain = DAG.getNode(X86ISD::BRCOND, dl, Op.getValueType(),
                                Chain, Dest, CC, Cmp);
            X86::CondCode CCode =
              (X86::CondCode)Cond.getOperand(1).getConstantOperandVal(0);
            CCode = X86::GetOppositeBranchCondition(CCode);
            CC = DAG.getConstant(CCode, dl, MVT::i8);
            Cond = Cmp;
            addTest = false;
          }
        }
      }
    } else if (Cond.hasOneUse() && isXor1OfSetCC(Cond)) {
      // Recognize for xorb (setcc), 1 patterns. The xor inverts the condition.
      // It should be transformed during dag combiner except when the condition
      // is set by a arithmetics with overflow node.
      X86::CondCode CCode =
        (X86::CondCode)Cond.getOperand(0).getConstantOperandVal(0);
      CCode = X86::GetOppositeBranchCondition(CCode);
      CC = DAG.getConstant(CCode, dl, MVT::i8);
      Cond = Cond.getOperand(0).getOperand(1);
      addTest = false;
    } else if (Cond.getOpcode() == ISD::SETCC &&
               cast<CondCodeSDNode>(Cond.getOperand(2))->get() == ISD::SETOEQ) {
      // For FCMP_OEQ, we can emit
      // two branches instead of an explicit AND instruction with a
      // separate test. However, we only do this if this block doesn't
      // have a fall-through edge, because this requires an explicit
      // jmp when the condition is false.
      if (Op.getNode()->hasOneUse()) {
        SDNode *User = *Op.getNode()->use_begin();
        // Look for an unconditional branch following this conditional branch.
        // We need this because we need to reverse the successors in order
        // to implement FCMP_OEQ.
        if (User->getOpcode() == ISD::BR) {
          SDValue FalseBB = User->getOperand(1);
          SDNode *NewBR =
            DAG.UpdateNodeOperands(User, User->getOperand(0), Dest);
          assert(NewBR == User);
          (void)NewBR;
          Dest = FalseBB;

          SDValue Cmp = DAG.getNode(X86ISD::CMP, dl, MVT::i32,
                                    Cond.getOperand(0), Cond.getOperand(1));
          Cmp = ConvertCmpIfNecessary(Cmp, DAG);
          CC = DAG.getConstant(X86::COND_NE, dl, MVT::i8);
          Chain = DAG.getNode(X86ISD::BRCOND, dl, Op.getValueType(),
                              Chain, Dest, CC, Cmp);
          CC = DAG.getConstant(X86::COND_P, dl, MVT::i8);
          Cond = Cmp;
          addTest = false;
        }
      }
    } else if (Cond.getOpcode() == ISD::SETCC &&
               cast<CondCodeSDNode>(Cond.getOperand(2))->get() == ISD::SETUNE) {
      // For FCMP_UNE, we can emit
      // two branches instead of an explicit AND instruction with a
      // separate test. However, we only do this if this block doesn't
      // have a fall-through edge, because this requires an explicit
      // jmp when the condition is false.
      if (Op.getNode()->hasOneUse()) {
        SDNode *User = *Op.getNode()->use_begin();
        // Look for an unconditional branch following this conditional branch.
        // We need this because we need to reverse the successors in order
        // to implement FCMP_UNE.
        if (User->getOpcode() == ISD::BR) {
          SDValue FalseBB = User->getOperand(1);
          SDNode *NewBR =
            DAG.UpdateNodeOperands(User, User->getOperand(0), Dest);
          assert(NewBR == User);
          (void)NewBR;

          SDValue Cmp = DAG.getNode(X86ISD::CMP, dl, MVT::i32,
                                    Cond.getOperand(0), Cond.getOperand(1));
          Cmp = ConvertCmpIfNecessary(Cmp, DAG);
          CC = DAG.getConstant(X86::COND_NE, dl, MVT::i8);
          Chain = DAG.getNode(X86ISD::BRCOND, dl, Op.getValueType(),
                              Chain, Dest, CC, Cmp);
          CC = DAG.getConstant(X86::COND_NP, dl, MVT::i8);
          Cond = Cmp;
          addTest = false;
          Dest = FalseBB;
        }
      }
    }
  }

  if (addTest) {
    // Look pass the truncate if the high bits are known zero.
    if (isTruncWithZeroHighBitsInput(Cond, DAG))
        Cond = Cond.getOperand(0);

    // We know the result of AND is compared against zero. Try to match
    // it to BT.
    if (Cond.getOpcode() == ISD::AND && Cond.hasOneUse()) {
      if (SDValue NewSetCC = LowerAndToBT(Cond, ISD::SETNE, dl, DAG)) {
        CC = NewSetCC.getOperand(0);
        Cond = NewSetCC.getOperand(1);
        addTest = false;
      }
    }
  }

  if (addTest) {
    X86::CondCode X86Cond = Inverted ? X86::COND_E : X86::COND_NE;
    CC = DAG.getConstant(X86Cond, dl, MVT::i8);
    Cond = EmitTest(Cond, X86Cond, dl, DAG);
  }
  Cond = ConvertCmpIfNecessary(Cond, DAG);
  return DAG.getNode(X86ISD::BRCOND, dl, Op.getValueType(),
                     Chain, Dest, CC, Cond);
}

// Lower dynamic stack allocation to _alloca call for Cygwin/Mingw targets.
// Calls to _alloca are needed to probe the stack when allocating more than 4k
// bytes in one go. Touching the stack at 4K increments is necessary to ensure
// that the guard pages used by the OS virtual memory manager are allocated in
// correct sequence.
SDValue
X86TargetLowering::LowerDYNAMIC_STACKALLOC(SDValue Op,
                                           SelectionDAG &DAG) const {
  MachineFunction &MF = DAG.getMachineFunction();
  bool SplitStack = MF.shouldSplitStack();
  bool EmitStackProbe = !getStackProbeSymbolName(MF).empty();
  bool Lower = (Subtarget.isOSWindows() && !Subtarget.isTargetMachO()) ||
               SplitStack || EmitStackProbe;
  SDLoc dl(Op);

  // Get the inputs.
  SDNode *Node = Op.getNode();
  SDValue Chain = Op.getOperand(0);
  SDValue Size  = Op.getOperand(1);
  unsigned Align = cast<ConstantSDNode>(Op.getOperand(2))->getZExtValue();
  EVT VT = Node->getValueType(0);

  // Chain the dynamic stack allocation so that it doesn't modify the stack
  // pointer when other instructions are using the stack.
  Chain = DAG.getCALLSEQ_START(Chain, 0, 0, dl);

  bool Is64Bit = Subtarget.is64Bit();
  MVT SPTy = getPointerTy(DAG.getDataLayout());

  SDValue Result;
  if (!Lower) {
    const TargetLowering &TLI = DAG.getTargetLoweringInfo();
    unsigned SPReg = TLI.getStackPointerRegisterToSaveRestore();
    assert(SPReg && "Target cannot require DYNAMIC_STACKALLOC expansion and"
                    " not tell us which reg is the stack pointer!");

    SDValue SP = DAG.getCopyFromReg(Chain, dl, SPReg, VT);
    Chain = SP.getValue(1);
    const TargetFrameLowering &TFI = *Subtarget.getFrameLowering();
    unsigned StackAlign = TFI.getStackAlignment();
    Result = DAG.getNode(ISD::SUB, dl, VT, SP, Size); // Value
    if (Align > StackAlign)
      Result = DAG.getNode(ISD::AND, dl, VT, Result,
                         DAG.getConstant(-(uint64_t)Align, dl, VT));
    Chain = DAG.getCopyToReg(Chain, dl, SPReg, Result); // Output chain
  } else if (SplitStack) {
    MachineRegisterInfo &MRI = MF.getRegInfo();

    if (Is64Bit) {
      // The 64 bit implementation of segmented stacks needs to clobber both r10
      // r11. This makes it impossible to use it along with nested parameters.
      const Function *F = MF.getFunction();
      for (const auto &A : F->args()) {
        if (A.hasNestAttr())
          report_fatal_error("Cannot use segmented stacks with functions that "
                             "have nested arguments.");
      }
    }

    const TargetRegisterClass *AddrRegClass = getRegClassFor(SPTy);
    unsigned Vreg = MRI.createVirtualRegister(AddrRegClass);
    Chain = DAG.getCopyToReg(Chain, dl, Vreg, Size);
    Result = DAG.getNode(X86ISD::SEG_ALLOCA, dl, SPTy, Chain,
                                DAG.getRegister(Vreg, SPTy));
  } else {
    SDVTList NodeTys = DAG.getVTList(MVT::Other, MVT::Glue);
    Chain = DAG.getNode(X86ISD::WIN_ALLOCA, dl, NodeTys, Chain, Size);
    MF.getInfo<X86MachineFunctionInfo>()->setHasWinAlloca(true);

    const X86RegisterInfo *RegInfo = Subtarget.getRegisterInfo();
    unsigned SPReg = RegInfo->getStackRegister();
    SDValue SP = DAG.getCopyFromReg(Chain, dl, SPReg, SPTy);
    Chain = SP.getValue(1);

    if (Align) {
      SP = DAG.getNode(ISD::AND, dl, VT, SP.getValue(0),
                       DAG.getConstant(-(uint64_t)Align, dl, VT));
      Chain = DAG.getCopyToReg(Chain, dl, SPReg, SP);
    }

    Result = SP;
  }

  Chain = DAG.getCALLSEQ_END(Chain, DAG.getIntPtrConstant(0, dl, true),
                             DAG.getIntPtrConstant(0, dl, true), SDValue(), dl);

  SDValue Ops[2] = {Result, Chain};
  return DAG.getMergeValues(Ops, dl);
}

SDValue X86TargetLowering::LowerVASTART(SDValue Op, SelectionDAG &DAG) const {
  MachineFunction &MF = DAG.getMachineFunction();
  auto PtrVT = getPointerTy(MF.getDataLayout());
  X86MachineFunctionInfo *FuncInfo = MF.getInfo<X86MachineFunctionInfo>();

  const Value *SV = cast<SrcValueSDNode>(Op.getOperand(2))->getValue();
  SDLoc DL(Op);

  if (!Subtarget.is64Bit() ||
      Subtarget.isCallingConvWin64(MF.getFunction()->getCallingConv())) {
    // vastart just stores the address of the VarArgsFrameIndex slot into the
    // memory location argument.
    SDValue FR = DAG.getFrameIndex(FuncInfo->getVarArgsFrameIndex(), PtrVT);
    return DAG.getStore(Op.getOperand(0), DL, FR, Op.getOperand(1),
                        MachinePointerInfo(SV));
  }

  // __va_list_tag:
  //   gp_offset         (0 - 6 * 8)
  //   fp_offset         (48 - 48 + 8 * 16)
  //   overflow_arg_area (point to parameters coming in memory).
  //   reg_save_area
  SmallVector<SDValue, 8> MemOps;
  SDValue FIN = Op.getOperand(1);
  // Store gp_offset
  SDValue Store = DAG.getStore(
      Op.getOperand(0), DL,
      DAG.getConstant(FuncInfo->getVarArgsGPOffset(), DL, MVT::i32), FIN,
      MachinePointerInfo(SV));
  MemOps.push_back(Store);

  // Store fp_offset
  FIN = DAG.getMemBasePlusOffset(FIN, 4, DL);
  Store = DAG.getStore(
      Op.getOperand(0), DL,
      DAG.getConstant(FuncInfo->getVarArgsFPOffset(), DL, MVT::i32), FIN,
      MachinePointerInfo(SV, 4));
  MemOps.push_back(Store);

  // Store ptr to overflow_arg_area
  FIN = DAG.getNode(ISD::ADD, DL, PtrVT, FIN, DAG.getIntPtrConstant(4, DL));
  SDValue OVFIN = DAG.getFrameIndex(FuncInfo->getVarArgsFrameIndex(), PtrVT);
  Store =
      DAG.getStore(Op.getOperand(0), DL, OVFIN, FIN, MachinePointerInfo(SV, 8));
  MemOps.push_back(Store);

  // Store ptr to reg_save_area.
  FIN = DAG.getNode(ISD::ADD, DL, PtrVT, FIN, DAG.getIntPtrConstant(
      Subtarget.isTarget64BitLP64() ? 8 : 4, DL));
  SDValue RSFIN = DAG.getFrameIndex(FuncInfo->getRegSaveFrameIndex(), PtrVT);
  Store = DAG.getStore(
      Op.getOperand(0), DL, RSFIN, FIN,
      MachinePointerInfo(SV, Subtarget.isTarget64BitLP64() ? 16 : 12));
  MemOps.push_back(Store);
  return DAG.getNode(ISD::TokenFactor, DL, MVT::Other, MemOps);
}

SDValue X86TargetLowering::LowerVAARG(SDValue Op, SelectionDAG &DAG) const {
  assert(Subtarget.is64Bit() &&
         "LowerVAARG only handles 64-bit va_arg!");
  assert(Op.getNumOperands() == 4);

  MachineFunction &MF = DAG.getMachineFunction();
  if (Subtarget.isCallingConvWin64(MF.getFunction()->getCallingConv()))
    // The Win64 ABI uses char* instead of a structure.
    return DAG.expandVAArg(Op.getNode());

  SDValue Chain = Op.getOperand(0);
  SDValue SrcPtr = Op.getOperand(1);
  const Value *SV = cast<SrcValueSDNode>(Op.getOperand(2))->getValue();
  unsigned Align = Op.getConstantOperandVal(3);
  SDLoc dl(Op);

  EVT ArgVT = Op.getNode()->getValueType(0);
  Type *ArgTy = ArgVT.getTypeForEVT(*DAG.getContext());
  uint32_t ArgSize = DAG.getDataLayout().getTypeAllocSize(ArgTy);
  uint8_t ArgMode;

  // Decide which area this value should be read from.
  // TODO: Implement the AMD64 ABI in its entirety. This simple
  // selection mechanism works only for the basic types.
  if (ArgVT == MVT::f80) {
    llvm_unreachable("va_arg for f80 not yet implemented");
  } else if (ArgVT.isFloatingPoint() && ArgSize <= 16 /*bytes*/) {
    ArgMode = 2;  // Argument passed in XMM register. Use fp_offset.
  } else if (ArgVT.isInteger() && ArgSize <= 32 /*bytes*/) {
    ArgMode = 1;  // Argument passed in GPR64 register(s). Use gp_offset.
  } else {
    llvm_unreachable("Unhandled argument type in LowerVAARG");
  }

  if (ArgMode == 2) {
    // Sanity Check: Make sure using fp_offset makes sense.
    assert(!Subtarget.useSoftFloat() &&
           !(MF.getFunction()->hasFnAttribute(Attribute::NoImplicitFloat)) &&
           Subtarget.hasSSE1());
  }

  // Insert VAARG_64 node into the DAG
  // VAARG_64 returns two values: Variable Argument Address, Chain
  SDValue InstOps[] = {Chain, SrcPtr, DAG.getConstant(ArgSize, dl, MVT::i32),
                       DAG.getConstant(ArgMode, dl, MVT::i8),
                       DAG.getConstant(Align, dl, MVT::i32)};
  SDVTList VTs = DAG.getVTList(getPointerTy(DAG.getDataLayout()), MVT::Other);
  SDValue VAARG = DAG.getMemIntrinsicNode(X86ISD::VAARG_64, dl,
                                          VTs, InstOps, MVT::i64,
                                          MachinePointerInfo(SV),
                                          /*Align=*/0,
                                          /*Volatile=*/false,
                                          /*ReadMem=*/true,
                                          /*WriteMem=*/true);
  Chain = VAARG.getValue(1);

  // Load the next argument and return it
  return DAG.getLoad(ArgVT, dl, Chain, VAARG, MachinePointerInfo());
}

static SDValue LowerVACOPY(SDValue Op, const X86Subtarget &Subtarget,
                           SelectionDAG &DAG) {
  // X86-64 va_list is a struct { i32, i32, i8*, i8* }, except on Windows,
  // where a va_list is still an i8*.
  assert(Subtarget.is64Bit() && "This code only handles 64-bit va_copy!");
  if (Subtarget.isCallingConvWin64(
        DAG.getMachineFunction().getFunction()->getCallingConv()))
    // Probably a Win64 va_copy.
    return DAG.expandVACopy(Op.getNode());

  SDValue Chain = Op.getOperand(0);
  SDValue DstPtr = Op.getOperand(1);
  SDValue SrcPtr = Op.getOperand(2);
  const Value *DstSV = cast<SrcValueSDNode>(Op.getOperand(3))->getValue();
  const Value *SrcSV = cast<SrcValueSDNode>(Op.getOperand(4))->getValue();
  SDLoc DL(Op);

  return DAG.getMemcpy(Chain, DL, DstPtr, SrcPtr,
                       DAG.getIntPtrConstant(24, DL), 8, /*isVolatile*/false,
                       false, false,
                       MachinePointerInfo(DstSV), MachinePointerInfo(SrcSV));
}

/// Handle vector element shifts where the shift amount is a constant.
/// Takes immediate version of shift as input.
static SDValue getTargetVShiftByConstNode(unsigned Opc, const SDLoc &dl, MVT VT,
                                          SDValue SrcOp, uint64_t ShiftAmt,
                                          SelectionDAG &DAG) {
  MVT ElementType = VT.getVectorElementType();

  // Bitcast the source vector to the output type, this is mainly necessary for
  // vXi8/vXi64 shifts.
  if (VT != SrcOp.getSimpleValueType())
    SrcOp = DAG.getBitcast(VT, SrcOp);

  // Fold this packed shift into its first operand if ShiftAmt is 0.
  if (ShiftAmt == 0)
    return SrcOp;

  // Check for ShiftAmt >= element width
  if (ShiftAmt >= ElementType.getSizeInBits()) {
    if (Opc == X86ISD::VSRAI)
      ShiftAmt = ElementType.getSizeInBits() - 1;
    else
      return DAG.getConstant(0, dl, VT);
  }

  assert((Opc == X86ISD::VSHLI || Opc == X86ISD::VSRLI || Opc == X86ISD::VSRAI)
         && "Unknown target vector shift-by-constant node");

  // Fold this packed vector shift into a build vector if SrcOp is a
  // vector of Constants or UNDEFs.
  if (ISD::isBuildVectorOfConstantSDNodes(SrcOp.getNode())) {
    SmallVector<SDValue, 8> Elts;
    unsigned NumElts = SrcOp->getNumOperands();
    ConstantSDNode *ND;

    switch(Opc) {
    default: llvm_unreachable("Unknown opcode!");
    case X86ISD::VSHLI:
      for (unsigned i=0; i!=NumElts; ++i) {
        SDValue CurrentOp = SrcOp->getOperand(i);
        if (CurrentOp->isUndef()) {
          Elts.push_back(CurrentOp);
          continue;
        }
        ND = cast<ConstantSDNode>(CurrentOp);
        const APInt &C = ND->getAPIntValue();
        Elts.push_back(DAG.getConstant(C.shl(ShiftAmt), dl, ElementType));
      }
      break;
    case X86ISD::VSRLI:
      for (unsigned i=0; i!=NumElts; ++i) {
        SDValue CurrentOp = SrcOp->getOperand(i);
        if (CurrentOp->isUndef()) {
          Elts.push_back(CurrentOp);
          continue;
        }
        ND = cast<ConstantSDNode>(CurrentOp);
        const APInt &C = ND->getAPIntValue();
        Elts.push_back(DAG.getConstant(C.lshr(ShiftAmt), dl, ElementType));
      }
      break;
    case X86ISD::VSRAI:
      for (unsigned i=0; i!=NumElts; ++i) {
        SDValue CurrentOp = SrcOp->getOperand(i);
        if (CurrentOp->isUndef()) {
          Elts.push_back(CurrentOp);
          continue;
        }
        ND = cast<ConstantSDNode>(CurrentOp);
        const APInt &C = ND->getAPIntValue();
        Elts.push_back(DAG.getConstant(C.ashr(ShiftAmt), dl, ElementType));
      }
      break;
    }

    return DAG.getBuildVector(VT, dl, Elts);
  }

  return DAG.getNode(Opc, dl, VT, SrcOp,
                     DAG.getConstant(ShiftAmt, dl, MVT::i8));
}

/// Handle vector element shifts where the shift amount may or may not be a
/// constant. Takes immediate version of shift as input.
static SDValue getTargetVShiftNode(unsigned Opc, const SDLoc &dl, MVT VT,
                                   SDValue SrcOp, SDValue ShAmt,
                                   const X86Subtarget &Subtarget,
                                   SelectionDAG &DAG) {
  MVT SVT = ShAmt.getSimpleValueType();
  assert((SVT == MVT::i32 || SVT == MVT::i64) && "Unexpected value type!");

  // Catch shift-by-constant.
  if (ConstantSDNode *CShAmt = dyn_cast<ConstantSDNode>(ShAmt))
    return getTargetVShiftByConstNode(Opc, dl, VT, SrcOp,
                                      CShAmt->getZExtValue(), DAG);

  // Change opcode to non-immediate version
  switch (Opc) {
    default: llvm_unreachable("Unknown target vector shift node");
    case X86ISD::VSHLI: Opc = X86ISD::VSHL; break;
    case X86ISD::VSRLI: Opc = X86ISD::VSRL; break;
    case X86ISD::VSRAI: Opc = X86ISD::VSRA; break;
  }

  // Need to build a vector containing shift amount.
  // SSE/AVX packed shifts only use the lower 64-bit of the shift count.
  // +=================+============+=======================================+
  // | ShAmt is        | HasSSE4.1? | Construct ShAmt vector as             |
  // +=================+============+=======================================+
  // | i64             | Yes, No    | Use ShAmt as lowest elt               |
  // | i32             | Yes        | zero-extend in-reg                    |
  // | (i32 zext(i16)) | Yes        | zero-extend in-reg                    |
  // | i16/i32         | No         | v4i32 build_vector(ShAmt, 0, ud, ud)) |
  // +=================+============+=======================================+

  if (SVT == MVT::i64)
    ShAmt = DAG.getNode(ISD::SCALAR_TO_VECTOR, SDLoc(ShAmt), MVT::v2i64, ShAmt);
  else if (Subtarget.hasSSE41() && ShAmt.getOpcode() == ISD::ZERO_EXTEND &&
           ShAmt.getOperand(0).getSimpleValueType() == MVT::i16) {
    ShAmt = ShAmt.getOperand(0);
    ShAmt = DAG.getNode(ISD::SCALAR_TO_VECTOR, SDLoc(ShAmt), MVT::v8i16, ShAmt);
    ShAmt = DAG.getZeroExtendVectorInReg(ShAmt, SDLoc(ShAmt), MVT::v2i64);
  } else if (Subtarget.hasSSE41() &&
             ShAmt.getOpcode() == ISD::EXTRACT_VECTOR_ELT) {
    ShAmt = DAG.getNode(ISD::SCALAR_TO_VECTOR, SDLoc(ShAmt), MVT::v4i32, ShAmt);
    ShAmt = DAG.getZeroExtendVectorInReg(ShAmt, SDLoc(ShAmt), MVT::v2i64);
  } else {
    SDValue ShOps[4] = {ShAmt, DAG.getConstant(0, dl, SVT),
                        DAG.getUNDEF(SVT), DAG.getUNDEF(SVT)};
    ShAmt = DAG.getBuildVector(MVT::v4i32, dl, ShOps);
  }

  // The return type has to be a 128-bit type with the same element
  // type as the input type.
  MVT EltVT = VT.getVectorElementType();
  MVT ShVT = MVT::getVectorVT(EltVT, 128/EltVT.getSizeInBits());

  ShAmt = DAG.getBitcast(ShVT, ShAmt);
  return DAG.getNode(Opc, dl, VT, SrcOp, ShAmt);
}

/// \brief Return Mask with the necessary casting or extending
/// for \p Mask according to \p MaskVT when lowering masking intrinsics
static SDValue getMaskNode(SDValue Mask, MVT MaskVT,
                           const X86Subtarget &Subtarget, SelectionDAG &DAG,
                           const SDLoc &dl) {

  if (isAllOnesConstant(Mask))
    return DAG.getTargetConstant(1, dl, MaskVT);
  if (X86::isZeroNode(Mask))
    return DAG.getTargetConstant(0, dl, MaskVT);

  if (MaskVT.bitsGT(Mask.getSimpleValueType())) {
    // Mask should be extended
    Mask = DAG.getNode(ISD::ANY_EXTEND, dl,
                       MVT::getIntegerVT(MaskVT.getSizeInBits()), Mask);
  }

  if (Mask.getSimpleValueType() == MVT::i64 && Subtarget.is32Bit()) {
    if (MaskVT == MVT::v64i1) {
      assert(Subtarget.hasBWI() && "Expected AVX512BW target!");
      // In case 32bit mode, bitcast i64 is illegal, extend/split it.
      SDValue Lo, Hi;
      Lo = DAG.getNode(ISD::EXTRACT_ELEMENT, dl, MVT::i32, Mask,
                          DAG.getConstant(0, dl, MVT::i32));
      Hi = DAG.getNode(ISD::EXTRACT_ELEMENT, dl, MVT::i32, Mask,
                          DAG.getConstant(1, dl, MVT::i32));

      Lo = DAG.getBitcast(MVT::v32i1, Lo);
      Hi = DAG.getBitcast(MVT::v32i1, Hi);

      return DAG.getNode(ISD::CONCAT_VECTORS, dl, MVT::v64i1, Lo, Hi);
    } else {
      // MaskVT require < 64bit. Truncate mask (should succeed in any case),
      // and bitcast.
      MVT TruncVT = MVT::getIntegerVT(MaskVT.getSizeInBits());
      return DAG.getBitcast(MaskVT,
                            DAG.getNode(ISD::TRUNCATE, dl, TruncVT, Mask));
    }

  } else {
    MVT BitcastVT = MVT::getVectorVT(MVT::i1,
                                     Mask.getSimpleValueType().getSizeInBits());
    // In case when MaskVT equals v2i1 or v4i1, low 2 or 4 elements
    // are extracted by EXTRACT_SUBVECTOR.
    return DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl, MaskVT,
                       DAG.getBitcast(BitcastVT, Mask),
                       DAG.getIntPtrConstant(0, dl));
  }
}

/// \brief Return (and \p Op, \p Mask) for compare instructions or
/// (vselect \p Mask, \p Op, \p PreservedSrc) for others along with the
/// necessary casting or extending for \p Mask when lowering masking intrinsics
static SDValue getVectorMaskingNode(SDValue Op, SDValue Mask,
                  SDValue PreservedSrc,
                  const X86Subtarget &Subtarget,
                  SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();
  MVT MaskVT = MVT::getVectorVT(MVT::i1, VT.getVectorNumElements());
  unsigned OpcodeSelect = ISD::VSELECT;
  SDLoc dl(Op);

  if (isAllOnesConstant(Mask))
    return Op;

  SDValue VMask = getMaskNode(Mask, MaskVT, Subtarget, DAG, dl);

  switch (Op.getOpcode()) {
  default: break;
  case X86ISD::PCMPEQM:
  case X86ISD::PCMPGTM:
  case X86ISD::CMPM:
  case X86ISD::CMPMU:
    return DAG.getNode(ISD::AND, dl, VT, Op, VMask);
  case X86ISD::VFPCLASS:
    case X86ISD::VFPCLASSS:
    return DAG.getNode(ISD::OR, dl, VT, Op, VMask);
  case X86ISD::VTRUNC:
  case X86ISD::VTRUNCS:
  case X86ISD::VTRUNCUS:
  case X86ISD::CVTPS2PH:
    // We can't use ISD::VSELECT here because it is not always "Legal"
    // for the destination type. For example vpmovqb require only AVX512
    // and vselect that can operate on byte element type require BWI
    OpcodeSelect = X86ISD::SELECT;
    break;
  }
  if (PreservedSrc.isUndef())
    PreservedSrc = getZeroVector(VT, Subtarget, DAG, dl);
  return DAG.getNode(OpcodeSelect, dl, VT, VMask, Op, PreservedSrc);
}

/// \brief Creates an SDNode for a predicated scalar operation.
/// \returns (X86vselect \p Mask, \p Op, \p PreservedSrc).
/// The mask is coming as MVT::i8 and it should be transformed
/// to MVT::v1i1 while lowering masking intrinsics.
/// The main difference between ScalarMaskingNode and VectorMaskingNode is using
/// "X86select" instead of "vselect". We just can't create the "vselect" node
/// for a scalar instruction.
static SDValue getScalarMaskingNode(SDValue Op, SDValue Mask,
                                    SDValue PreservedSrc,
                                    const X86Subtarget &Subtarget,
                                    SelectionDAG &DAG) {

  if (auto *MaskConst = dyn_cast<ConstantSDNode>(Mask))
    if (MaskConst->getZExtValue() & 0x1)
      return Op;

  MVT VT = Op.getSimpleValueType();
  SDLoc dl(Op);

  SDValue IMask = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, MVT::v1i1, Mask);
  if (Op.getOpcode() == X86ISD::FSETCCM ||
      Op.getOpcode() == X86ISD::FSETCCM_RND)
    return DAG.getNode(ISD::AND, dl, VT, Op, IMask);
  if (Op.getOpcode() == X86ISD::VFPCLASSS)
    return DAG.getNode(ISD::OR, dl, VT, Op, IMask);

  if (PreservedSrc.isUndef())
    PreservedSrc = getZeroVector(VT, Subtarget, DAG, dl);
  return DAG.getNode(X86ISD::SELECTS, dl, VT, IMask, Op, PreservedSrc);
}

static int getSEHRegistrationNodeSize(const Function *Fn) {
  if (!Fn->hasPersonalityFn())
    report_fatal_error(
        "querying registration node size for function without personality");
  // The RegNodeSize is 6 32-bit words for SEH and 4 for C++ EH. See
  // WinEHStatePass for the full struct definition.
  switch (classifyEHPersonality(Fn->getPersonalityFn())) {
  case EHPersonality::MSVC_X86SEH: return 24;
  case EHPersonality::MSVC_CXX: return 16;
  default: break;
  }
  report_fatal_error(
      "can only recover FP for 32-bit MSVC EH personality functions");
}

/// When the MSVC runtime transfers control to us, either to an outlined
/// function or when returning to a parent frame after catching an exception, we
/// recover the parent frame pointer by doing arithmetic on the incoming EBP.
/// Here's the math:
///   RegNodeBase = EntryEBP - RegNodeSize
///   ParentFP = RegNodeBase - ParentFrameOffset
/// Subtracting RegNodeSize takes us to the offset of the registration node, and
/// subtracting the offset (negative on x86) takes us back to the parent FP.
static SDValue recoverFramePointer(SelectionDAG &DAG, const Function *Fn,
                                   SDValue EntryEBP) {
  MachineFunction &MF = DAG.getMachineFunction();
  SDLoc dl;

  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  MVT PtrVT = TLI.getPointerTy(DAG.getDataLayout());

  // It's possible that the parent function no longer has a personality function
  // if the exceptional code was optimized away, in which case we just return
  // the incoming EBP.
  if (!Fn->hasPersonalityFn())
    return EntryEBP;

  // Get an MCSymbol that will ultimately resolve to the frame offset of the EH
  // registration, or the .set_setframe offset.
  MCSymbol *OffsetSym =
      MF.getMMI().getContext().getOrCreateParentFrameOffsetSymbol(
          GlobalValue::dropLLVMManglingEscape(Fn->getName()));
  SDValue OffsetSymVal = DAG.getMCSymbol(OffsetSym, PtrVT);
  SDValue ParentFrameOffset =
      DAG.getNode(ISD::LOCAL_RECOVER, dl, PtrVT, OffsetSymVal);

  // Return EntryEBP + ParentFrameOffset for x64. This adjusts from RSP after
  // prologue to RBP in the parent function.
  const X86Subtarget &Subtarget =
      static_cast<const X86Subtarget &>(DAG.getSubtarget());
  if (Subtarget.is64Bit())
    return DAG.getNode(ISD::ADD, dl, PtrVT, EntryEBP, ParentFrameOffset);

  int RegNodeSize = getSEHRegistrationNodeSize(Fn);
  // RegNodeBase = EntryEBP - RegNodeSize
  // ParentFP = RegNodeBase - ParentFrameOffset
  SDValue RegNodeBase = DAG.getNode(ISD::SUB, dl, PtrVT, EntryEBP,
                                    DAG.getConstant(RegNodeSize, dl, PtrVT));
  return DAG.getNode(ISD::SUB, dl, PtrVT, RegNodeBase, ParentFrameOffset);
}

SDValue X86TargetLowering::LowerINTRINSIC_WO_CHAIN(SDValue Op,
                                                   SelectionDAG &DAG) const {
  // Helper to detect if the operand is CUR_DIRECTION rounding mode.
  auto isRoundModeCurDirection = [](SDValue Rnd) {
    if (!isa<ConstantSDNode>(Rnd))
      return false;

    unsigned Round = cast<ConstantSDNode>(Rnd)->getZExtValue();
    return Round == X86::STATIC_ROUNDING::CUR_DIRECTION;
  };

  SDLoc dl(Op);
  unsigned IntNo = cast<ConstantSDNode>(Op.getOperand(0))->getZExtValue();
  MVT VT = Op.getSimpleValueType();
  const IntrinsicData* IntrData = getIntrinsicWithoutChain(IntNo);
  if (IntrData) {
    switch(IntrData->Type) {
    case INTR_TYPE_1OP:
      return DAG.getNode(IntrData->Opc0, dl, Op.getValueType(), Op.getOperand(1));
    case INTR_TYPE_2OP:
      return DAG.getNode(IntrData->Opc0, dl, Op.getValueType(), Op.getOperand(1),
        Op.getOperand(2));
    case INTR_TYPE_3OP:
      return DAG.getNode(IntrData->Opc0, dl, Op.getValueType(), Op.getOperand(1),
        Op.getOperand(2), Op.getOperand(3));
    case INTR_TYPE_4OP:
      return DAG.getNode(IntrData->Opc0, dl, Op.getValueType(), Op.getOperand(1),
        Op.getOperand(2), Op.getOperand(3), Op.getOperand(4));
    case INTR_TYPE_1OP_MASK_RM: {
      SDValue Src = Op.getOperand(1);
      SDValue PassThru = Op.getOperand(2);
      SDValue Mask = Op.getOperand(3);
      SDValue RoundingMode;
      // We always add rounding mode to the Node.
      // If the rounding mode is not specified, we add the
      // "current direction" mode.
      if (Op.getNumOperands() == 4)
        RoundingMode =
          DAG.getConstant(X86::STATIC_ROUNDING::CUR_DIRECTION, dl, MVT::i32);
      else
        RoundingMode = Op.getOperand(4);
      assert(IntrData->Opc1 == 0 && "Unexpected second opcode!");
      return getVectorMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT, Src,
                                              RoundingMode),
                                  Mask, PassThru, Subtarget, DAG);
    }
    case INTR_TYPE_1OP_MASK: {
      SDValue Src = Op.getOperand(1);
      SDValue PassThru = Op.getOperand(2);
      SDValue Mask = Op.getOperand(3);
      // We add rounding mode to the Node when
      //   - RM Opcode is specified and
      //   - RM is not "current direction".
      unsigned IntrWithRoundingModeOpcode = IntrData->Opc1;
      if (IntrWithRoundingModeOpcode != 0) {
        SDValue Rnd = Op.getOperand(4);
        if (!isRoundModeCurDirection(Rnd)) {
          return getVectorMaskingNode(DAG.getNode(IntrWithRoundingModeOpcode,
                                      dl, Op.getValueType(),
                                      Src, Rnd),
                                      Mask, PassThru, Subtarget, DAG);
        }
      }
      return getVectorMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT, Src),
                                  Mask, PassThru, Subtarget, DAG);
    }
    case INTR_TYPE_SCALAR_MASK: {
      SDValue Src1 = Op.getOperand(1);
      SDValue Src2 = Op.getOperand(2);
      SDValue passThru = Op.getOperand(3);
      SDValue Mask = Op.getOperand(4);
      unsigned IntrWithRoundingModeOpcode = IntrData->Opc1;
      if (IntrWithRoundingModeOpcode != 0) {
        SDValue Rnd = Op.getOperand(5);
        if (!isRoundModeCurDirection(Rnd))
          return getScalarMaskingNode(DAG.getNode(IntrWithRoundingModeOpcode,
                                                  dl, VT, Src1, Src2, Rnd),
                                      Mask, passThru, Subtarget, DAG);
      }
      return getScalarMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT, Src1, Src2),
                                  Mask, passThru, Subtarget, DAG);
    }
    case INTR_TYPE_SCALAR_MASK_RM: {
      SDValue Src1 = Op.getOperand(1);
      SDValue Src2 = Op.getOperand(2);
      SDValue Src0 = Op.getOperand(3);
      SDValue Mask = Op.getOperand(4);
      // There are 2 kinds of intrinsics in this group:
      // (1) With suppress-all-exceptions (sae) or rounding mode- 6 operands
      // (2) With rounding mode and sae - 7 operands.
      if (Op.getNumOperands() == 6) {
        SDValue Sae  = Op.getOperand(5);
        return getScalarMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT, Src1, Src2,
                                                Sae),
                                    Mask, Src0, Subtarget, DAG);
      }
      assert(Op.getNumOperands() == 7 && "Unexpected intrinsic form");
      SDValue RoundingMode  = Op.getOperand(5);
      SDValue Sae  = Op.getOperand(6);
      return getScalarMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT, Src1, Src2,
                                              RoundingMode, Sae),
                                  Mask, Src0, Subtarget, DAG);
    }
    case INTR_TYPE_2OP_MASK:
    case INTR_TYPE_2OP_IMM8_MASK: {
      SDValue Src1 = Op.getOperand(1);
      SDValue Src2 = Op.getOperand(2);
      SDValue PassThru = Op.getOperand(3);
      SDValue Mask = Op.getOperand(4);

      if (IntrData->Type == INTR_TYPE_2OP_IMM8_MASK)
        Src2 = DAG.getNode(ISD::TRUNCATE, dl, MVT::i8, Src2);

      // We specify 2 possible opcodes for intrinsics with rounding modes.
      // First, we check if the intrinsic may have non-default rounding mode,
      // (IntrData->Opc1 != 0), then we check the rounding mode operand.
      unsigned IntrWithRoundingModeOpcode = IntrData->Opc1;
      if (IntrWithRoundingModeOpcode != 0) {
        SDValue Rnd = Op.getOperand(5);
        if (!isRoundModeCurDirection(Rnd)) {
          return getVectorMaskingNode(DAG.getNode(IntrWithRoundingModeOpcode,
                                      dl, Op.getValueType(),
                                      Src1, Src2, Rnd),
                                      Mask, PassThru, Subtarget, DAG);
        }
      }
      // TODO: Intrinsics should have fast-math-flags to propagate.
      return getVectorMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT,Src1,Src2),
                                  Mask, PassThru, Subtarget, DAG);
    }
    case INTR_TYPE_2OP_MASK_RM: {
      SDValue Src1 = Op.getOperand(1);
      SDValue Src2 = Op.getOperand(2);
      SDValue PassThru = Op.getOperand(3);
      SDValue Mask = Op.getOperand(4);
      // We specify 2 possible modes for intrinsics, with/without rounding
      // modes.
      // First, we check if the intrinsic have rounding mode (6 operands),
      // if not, we set rounding mode to "current".
      SDValue Rnd;
      if (Op.getNumOperands() == 6)
        Rnd = Op.getOperand(5);
      else
        Rnd = DAG.getConstant(X86::STATIC_ROUNDING::CUR_DIRECTION, dl, MVT::i32);
      return getVectorMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT,
                                              Src1, Src2, Rnd),
                                  Mask, PassThru, Subtarget, DAG);
    }
    case INTR_TYPE_3OP_SCALAR_MASK_RM: {
      SDValue Src1 = Op.getOperand(1);
      SDValue Src2 = Op.getOperand(2);
      SDValue Src3 = Op.getOperand(3);
      SDValue PassThru = Op.getOperand(4);
      SDValue Mask = Op.getOperand(5);
      SDValue Sae  = Op.getOperand(6);

      return getScalarMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT, Src1,
                                              Src2, Src3, Sae),
                                  Mask, PassThru, Subtarget, DAG);
    }
    case INTR_TYPE_3OP_MASK_RM: {
      SDValue Src1 = Op.getOperand(1);
      SDValue Src2 = Op.getOperand(2);
      SDValue Imm = Op.getOperand(3);
      SDValue PassThru = Op.getOperand(4);
      SDValue Mask = Op.getOperand(5);
      // We specify 2 possible modes for intrinsics, with/without rounding
      // modes.
      // First, we check if the intrinsic have rounding mode (7 operands),
      // if not, we set rounding mode to "current".
      SDValue Rnd;
      if (Op.getNumOperands() == 7)
        Rnd = Op.getOperand(6);
      else
        Rnd = DAG.getConstant(X86::STATIC_ROUNDING::CUR_DIRECTION, dl, MVT::i32);
      return getVectorMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT,
                                              Src1, Src2, Imm, Rnd),
                                  Mask, PassThru, Subtarget, DAG);
    }
    case INTR_TYPE_3OP_IMM8_MASK:
    case INTR_TYPE_3OP_MASK: {
      SDValue Src1 = Op.getOperand(1);
      SDValue Src2 = Op.getOperand(2);
      SDValue Src3 = Op.getOperand(3);
      SDValue PassThru = Op.getOperand(4);
      SDValue Mask = Op.getOperand(5);

      if (IntrData->Type == INTR_TYPE_3OP_IMM8_MASK)
        Src3 = DAG.getNode(ISD::TRUNCATE, dl, MVT::i8, Src3);

      // We specify 2 possible opcodes for intrinsics with rounding modes.
      // First, we check if the intrinsic may have non-default rounding mode,
      // (IntrData->Opc1 != 0), then we check the rounding mode operand.
      unsigned IntrWithRoundingModeOpcode = IntrData->Opc1;
      if (IntrWithRoundingModeOpcode != 0) {
        SDValue Rnd = Op.getOperand(6);
        if (!isRoundModeCurDirection(Rnd)) {
          return getVectorMaskingNode(DAG.getNode(IntrWithRoundingModeOpcode,
                                      dl, Op.getValueType(),
                                      Src1, Src2, Src3, Rnd),
                                      Mask, PassThru, Subtarget, DAG);
        }
      }
      return getVectorMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT,
                                              Src1, Src2, Src3),
                                  Mask, PassThru, Subtarget, DAG);
    }
    case VPERM_2OP_MASK : {
      SDValue Src1 = Op.getOperand(1);
      SDValue Src2 = Op.getOperand(2);
      SDValue PassThru = Op.getOperand(3);
      SDValue Mask = Op.getOperand(4);

      // Swap Src1 and Src2 in the node creation
      return getVectorMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT,Src2, Src1),
                                  Mask, PassThru, Subtarget, DAG);
    }
    case VPERM_3OP_MASKZ:
    case VPERM_3OP_MASK:{
      MVT VT = Op.getSimpleValueType();
      // Src2 is the PassThru
      SDValue Src1 = Op.getOperand(1);
      // PassThru needs to be the same type as the destination in order
      // to pattern match correctly.
      SDValue Src2 = DAG.getBitcast(VT, Op.getOperand(2));
      SDValue Src3 = Op.getOperand(3);
      SDValue Mask = Op.getOperand(4);
      SDValue PassThru = SDValue();

      // set PassThru element
      if (IntrData->Type == VPERM_3OP_MASKZ)
        PassThru = getZeroVector(VT, Subtarget, DAG, dl);
      else
        PassThru = Src2;

      // Swap Src1 and Src2 in the node creation
      return getVectorMaskingNode(DAG.getNode(IntrData->Opc0,
                                              dl, Op.getValueType(),
                                              Src2, Src1, Src3),
                                  Mask, PassThru, Subtarget, DAG);
    }
    case FMA_OP_MASK3:
    case FMA_OP_MASKZ:
    case FMA_OP_MASK: {
      SDValue Src1 = Op.getOperand(1);
      SDValue Src2 = Op.getOperand(2);
      SDValue Src3 = Op.getOperand(3);
      SDValue Mask = Op.getOperand(4);
      MVT VT = Op.getSimpleValueType();
      SDValue PassThru = SDValue();

      // set PassThru element
      if (IntrData->Type == FMA_OP_MASKZ)
        PassThru = getZeroVector(VT, Subtarget, DAG, dl);
      else if (IntrData->Type == FMA_OP_MASK3)
        PassThru = Src3;
      else
        PassThru = Src1;

      // We specify 2 possible opcodes for intrinsics with rounding modes.
      // First, we check if the intrinsic may have non-default rounding mode,
      // (IntrData->Opc1 != 0), then we check the rounding mode operand.
      unsigned IntrWithRoundingModeOpcode = IntrData->Opc1;
      if (IntrWithRoundingModeOpcode != 0) {
        SDValue Rnd = Op.getOperand(5);
        if (!isRoundModeCurDirection(Rnd))
          return getVectorMaskingNode(DAG.getNode(IntrWithRoundingModeOpcode,
                                                  dl, Op.getValueType(),
                                                  Src1, Src2, Src3, Rnd),
                                      Mask, PassThru, Subtarget, DAG);
      }
      return getVectorMaskingNode(DAG.getNode(IntrData->Opc0,
                                              dl, Op.getValueType(),
                                              Src1, Src2, Src3),
                                  Mask, PassThru, Subtarget, DAG);
    }
    case FMA_OP_SCALAR_MASK:
    case FMA_OP_SCALAR_MASK3:
    case FMA_OP_SCALAR_MASKZ: {
      SDValue Src1 = Op.getOperand(1);
      SDValue Src2 = Op.getOperand(2);
      SDValue Src3 = Op.getOperand(3);
      SDValue Mask = Op.getOperand(4);
      MVT VT = Op.getSimpleValueType();
      SDValue PassThru = SDValue();

      // set PassThru element
      if (IntrData->Type == FMA_OP_SCALAR_MASKZ)
        PassThru = getZeroVector(VT, Subtarget, DAG, dl);
      else if (IntrData->Type == FMA_OP_SCALAR_MASK3)
        PassThru = Src3;
      else
        PassThru = Src1;

      unsigned IntrWithRoundingModeOpcode = IntrData->Opc1;
      if (IntrWithRoundingModeOpcode != 0) {
        SDValue Rnd = Op.getOperand(5);
        if (!isRoundModeCurDirection(Rnd))
          return getScalarMaskingNode(DAG.getNode(IntrWithRoundingModeOpcode, dl,
                                                  Op.getValueType(), Src1, Src2,
                                                  Src3, Rnd),
                                      Mask, PassThru, Subtarget, DAG);
      }

      return getScalarMaskingNode(DAG.getNode(IntrData->Opc0, dl,
                                              Op.getValueType(), Src1, Src2,
                                              Src3),
                                  Mask, PassThru, Subtarget, DAG);
    }
    case IFMA_OP_MASKZ:
    case IFMA_OP_MASK: {
      SDValue Src1 = Op.getOperand(1);
      SDValue Src2 = Op.getOperand(2);
      SDValue Src3 = Op.getOperand(3);
      SDValue Mask = Op.getOperand(4);
      MVT VT = Op.getSimpleValueType();
      SDValue PassThru = Src1;

      // set PassThru element
      if (IntrData->Type == IFMA_OP_MASKZ)
        PassThru = getZeroVector(VT, Subtarget, DAG, dl);

      // Node we need to swizzle the operands to pass the multiply operands
      // first.
      return getVectorMaskingNode(DAG.getNode(IntrData->Opc0,
                                              dl, Op.getValueType(),
                                              Src2, Src3, Src1),
                                  Mask, PassThru, Subtarget, DAG);
    }
    case TERLOG_OP_MASK:
    case TERLOG_OP_MASKZ: {
      SDValue Src1 = Op.getOperand(1);
      SDValue Src2 = Op.getOperand(2);
      SDValue Src3 = Op.getOperand(3);
      SDValue Src4 = DAG.getNode(ISD::TRUNCATE, dl, MVT::i8, Op.getOperand(4));
      SDValue Mask = Op.getOperand(5);
      MVT VT = Op.getSimpleValueType();
      SDValue PassThru = Src1;
      // Set PassThru element.
      if (IntrData->Type == TERLOG_OP_MASKZ)
        PassThru = getZeroVector(VT, Subtarget, DAG, dl);

      return getVectorMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT,
                                              Src1, Src2, Src3, Src4),
                                  Mask, PassThru, Subtarget, DAG);
    }
    case CVTPD2PS:
      // ISD::FP_ROUND has a second argument that indicates if the truncation
      // does not change the value. Set it to 0 since it can change.
      return DAG.getNode(IntrData->Opc0, dl, VT, Op.getOperand(1),
                         DAG.getIntPtrConstant(0, dl));
    case CVTPD2PS_MASK: {
      SDValue Src = Op.getOperand(1);
      SDValue PassThru = Op.getOperand(2);
      SDValue Mask = Op.getOperand(3);
      // We add rounding mode to the Node when
      //   - RM Opcode is specified and
      //   - RM is not "current direction".
      unsigned IntrWithRoundingModeOpcode = IntrData->Opc1;
      if (IntrWithRoundingModeOpcode != 0) {
        SDValue Rnd = Op.getOperand(4);
        if (!isRoundModeCurDirection(Rnd)) {
          return getVectorMaskingNode(DAG.getNode(IntrWithRoundingModeOpcode,
                                      dl, Op.getValueType(),
                                      Src, Rnd),
                                      Mask, PassThru, Subtarget, DAG);
        }
      }
      assert(IntrData->Opc0 == ISD::FP_ROUND && "Unexpected opcode!");
      // ISD::FP_ROUND has a second argument that indicates if the truncation
      // does not change the value. Set it to 0 since it can change.
      return getVectorMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT, Src,
                                              DAG.getIntPtrConstant(0, dl)),
                                  Mask, PassThru, Subtarget, DAG);
    }
    case FPCLASS: {
      // FPclass intrinsics with mask
       SDValue Src1 = Op.getOperand(1);
       MVT VT = Src1.getSimpleValueType();
       MVT MaskVT = MVT::getVectorVT(MVT::i1, VT.getVectorNumElements());
       SDValue Imm = Op.getOperand(2);
       SDValue Mask = Op.getOperand(3);
       MVT BitcastVT = MVT::getVectorVT(MVT::i1,
                                     Mask.getSimpleValueType().getSizeInBits());
       SDValue FPclass = DAG.getNode(IntrData->Opc0, dl, MaskVT, Src1, Imm);
       SDValue FPclassMask = getVectorMaskingNode(FPclass, Mask,
                                                 DAG.getTargetConstant(0, dl, MaskVT),
                                                 Subtarget, DAG);
       SDValue Res = DAG.getNode(ISD::INSERT_SUBVECTOR, dl, BitcastVT,
                                 DAG.getUNDEF(BitcastVT), FPclassMask,
                                 DAG.getIntPtrConstant(0, dl));
       return DAG.getBitcast(Op.getValueType(), Res);
    }
    case FPCLASSS: {
      SDValue Src1 = Op.getOperand(1);
      SDValue Imm = Op.getOperand(2);
      SDValue Mask = Op.getOperand(3);
      SDValue FPclass = DAG.getNode(IntrData->Opc0, dl, MVT::v1i1, Src1, Imm);
      SDValue FPclassMask = getScalarMaskingNode(FPclass, Mask,
        DAG.getTargetConstant(0, dl, MVT::i1), Subtarget, DAG);
      return DAG.getNode(X86ISD::VEXTRACT, dl, MVT::i8, FPclassMask,
                         DAG.getIntPtrConstant(0, dl));
    }
    case CMP_MASK:
    case CMP_MASK_CC: {
      // Comparison intrinsics with masks.
      // Example of transformation:
      // (i8 (int_x86_avx512_mask_pcmpeq_q_128
      //             (v2i64 %a), (v2i64 %b), (i8 %mask))) ->
      // (i8 (bitcast
      //   (v8i1 (insert_subvector undef,
      //           (v2i1 (and (PCMPEQM %a, %b),
      //                      (extract_subvector
      //                         (v8i1 (bitcast %mask)), 0))), 0))))
      MVT VT = Op.getOperand(1).getSimpleValueType();
      MVT MaskVT = MVT::getVectorVT(MVT::i1, VT.getVectorNumElements());
      SDValue Mask = Op.getOperand((IntrData->Type == CMP_MASK_CC) ? 4 : 3);
      MVT BitcastVT = MVT::getVectorVT(MVT::i1,
                                       Mask.getSimpleValueType().getSizeInBits());
      SDValue Cmp;
      if (IntrData->Type == CMP_MASK_CC) {
        SDValue CC = Op.getOperand(3);
        CC = DAG.getNode(ISD::TRUNCATE, dl, MVT::i8, CC);
        // We specify 2 possible opcodes for intrinsics with rounding modes.
        // First, we check if the intrinsic may have non-default rounding mode,
        // (IntrData->Opc1 != 0), then we check the rounding mode operand.
        if (IntrData->Opc1 != 0) {
          SDValue Rnd = Op.getOperand(5);
          if (!isRoundModeCurDirection(Rnd))
            Cmp = DAG.getNode(IntrData->Opc1, dl, MaskVT, Op.getOperand(1),
                              Op.getOperand(2), CC, Rnd);
        }
        //default rounding mode
        if(!Cmp.getNode())
            Cmp = DAG.getNode(IntrData->Opc0, dl, MaskVT, Op.getOperand(1),
                              Op.getOperand(2), CC);

      } else {
        assert(IntrData->Type == CMP_MASK && "Unexpected intrinsic type!");
        Cmp = DAG.getNode(IntrData->Opc0, dl, MaskVT, Op.getOperand(1),
                          Op.getOperand(2));
      }
      SDValue CmpMask = getVectorMaskingNode(Cmp, Mask,
                                             DAG.getTargetConstant(0, dl,
                                                                   MaskVT),
                                             Subtarget, DAG);
      SDValue Res = DAG.getNode(ISD::INSERT_SUBVECTOR, dl, BitcastVT,
                                DAG.getUNDEF(BitcastVT), CmpMask,
                                DAG.getIntPtrConstant(0, dl));
      return DAG.getBitcast(Op.getValueType(), Res);
    }
    case CMP_MASK_SCALAR_CC: {
      SDValue Src1 = Op.getOperand(1);
      SDValue Src2 = Op.getOperand(2);
      SDValue CC = DAG.getNode(ISD::TRUNCATE, dl, MVT::i8, Op.getOperand(3));
      SDValue Mask = Op.getOperand(4);

      SDValue Cmp;
      if (IntrData->Opc1 != 0) {
        SDValue Rnd = Op.getOperand(5);
        if (!isRoundModeCurDirection(Rnd))
          Cmp = DAG.getNode(IntrData->Opc1, dl, MVT::v1i1, Src1, Src2, CC, Rnd);
      }
      //default rounding mode
      if(!Cmp.getNode())
        Cmp = DAG.getNode(IntrData->Opc0, dl, MVT::v1i1, Src1, Src2, CC);

      SDValue CmpMask = getScalarMaskingNode(Cmp, Mask,
                                             DAG.getTargetConstant(0, dl,
                                                                   MVT::i1),
                                             Subtarget, DAG);
      return DAG.getNode(X86ISD::VEXTRACT, dl, MVT::i8, CmpMask,
                         DAG.getIntPtrConstant(0, dl));
    }
    case COMI: { // Comparison intrinsics
      ISD::CondCode CC = (ISD::CondCode)IntrData->Opc1;
      SDValue LHS = Op.getOperand(1);
      SDValue RHS = Op.getOperand(2);
      SDValue Comi = DAG.getNode(IntrData->Opc0, dl, MVT::i32, LHS, RHS);
      SDValue InvComi = DAG.getNode(IntrData->Opc0, dl, MVT::i32, RHS, LHS);
      SDValue SetCC;
      switch (CC) {
      case ISD::SETEQ: { // (ZF = 0 and PF = 0)
        SetCC = getSETCC(X86::COND_E, Comi, dl, DAG);
        SDValue SetNP = getSETCC(X86::COND_NP, Comi, dl, DAG);
        SetCC = DAG.getNode(ISD::AND, dl, MVT::i8, SetCC, SetNP);
        break;
      }
      case ISD::SETNE: { // (ZF = 1 or PF = 1)
        SetCC = getSETCC(X86::COND_NE, Comi, dl, DAG);
        SDValue SetP = getSETCC(X86::COND_P, Comi, dl, DAG);
        SetCC = DAG.getNode(ISD::OR, dl, MVT::i8, SetCC, SetP);
        break;
      }
      case ISD::SETGT: // (CF = 0 and ZF = 0)
        SetCC = getSETCC(X86::COND_A, Comi, dl, DAG);
        break;
      case ISD::SETLT: { // The condition is opposite to GT. Swap the operands.
        SetCC = getSETCC(X86::COND_A, InvComi, dl, DAG);
        break;
      }
      case ISD::SETGE: // CF = 0
        SetCC = getSETCC(X86::COND_AE, Comi, dl, DAG);
        break;
      case ISD::SETLE: // The condition is opposite to GE. Swap the operands.
        SetCC = getSETCC(X86::COND_AE, InvComi, dl, DAG);
        break;
      default:
        llvm_unreachable("Unexpected illegal condition!");
      }
      return DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::i32, SetCC);
    }
    case COMI_RM: { // Comparison intrinsics with Sae
      SDValue LHS = Op.getOperand(1);
      SDValue RHS = Op.getOperand(2);
      unsigned CondVal = cast<ConstantSDNode>(Op.getOperand(3))->getZExtValue();
      SDValue Sae = Op.getOperand(4);

      SDValue FCmp;
      if (isRoundModeCurDirection(Sae))
        FCmp = DAG.getNode(X86ISD::FSETCCM, dl, MVT::v1i1, LHS, RHS,
                           DAG.getConstant(CondVal, dl, MVT::i8));
      else
        FCmp = DAG.getNode(X86ISD::FSETCCM_RND, dl, MVT::v1i1, LHS, RHS,
                           DAG.getConstant(CondVal, dl, MVT::i8), Sae);
      return DAG.getNode(X86ISD::VEXTRACT, dl, MVT::i32, FCmp,
                         DAG.getIntPtrConstant(0, dl));
    }
    case VSHIFT:
      return getTargetVShiftNode(IntrData->Opc0, dl, Op.getSimpleValueType(),
                                 Op.getOperand(1), Op.getOperand(2), Subtarget,
                                 DAG);
    case COMPRESS_EXPAND_IN_REG: {
      SDValue Mask = Op.getOperand(3);
      SDValue DataToCompress = Op.getOperand(1);
      SDValue PassThru = Op.getOperand(2);
      if (isAllOnesConstant(Mask)) // return data as is
        return Op.getOperand(1);

      return getVectorMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT,
                                              DataToCompress),
                                  Mask, PassThru, Subtarget, DAG);
    }
    case BROADCASTM: {
      SDValue Mask = Op.getOperand(1);
      MVT MaskVT = MVT::getVectorVT(MVT::i1,
                                    Mask.getSimpleValueType().getSizeInBits());
      Mask = DAG.getBitcast(MaskVT, Mask);
      return DAG.getNode(IntrData->Opc0, dl, Op.getValueType(), Mask);
    }
    case KUNPCK: {
      MVT VT = Op.getSimpleValueType();
      MVT MaskVT = MVT::getVectorVT(MVT::i1, VT.getSizeInBits()/2);

      SDValue Src1 = getMaskNode(Op.getOperand(1), MaskVT, Subtarget, DAG, dl);
      SDValue Src2 = getMaskNode(Op.getOperand(2), MaskVT, Subtarget, DAG, dl);
      // Arguments should be swapped.
      SDValue Res = DAG.getNode(IntrData->Opc0, dl,
                                MVT::getVectorVT(MVT::i1, VT.getSizeInBits()),
                                Src2, Src1);
      return DAG.getBitcast(VT, Res);
    }
    case MASK_BINOP: {
      MVT VT = Op.getSimpleValueType();
      MVT MaskVT = MVT::getVectorVT(MVT::i1, VT.getSizeInBits());

      SDValue Src1 = getMaskNode(Op.getOperand(1), MaskVT, Subtarget, DAG, dl);
      SDValue Src2 = getMaskNode(Op.getOperand(2), MaskVT, Subtarget, DAG, dl);
      SDValue Res = DAG.getNode(IntrData->Opc0, dl, MaskVT, Src1, Src2);
      return DAG.getBitcast(VT, Res);
    }
    case FIXUPIMMS:
    case FIXUPIMMS_MASKZ:
    case FIXUPIMM:
    case FIXUPIMM_MASKZ:{
      SDValue Src1 = Op.getOperand(1);
      SDValue Src2 = Op.getOperand(2);
      SDValue Src3 = Op.getOperand(3);
      SDValue Imm = Op.getOperand(4);
      SDValue Mask = Op.getOperand(5);
      SDValue Passthru = (IntrData->Type == FIXUPIMM || IntrData->Type == FIXUPIMMS ) ?
                                         Src1 : getZeroVector(VT, Subtarget, DAG, dl);
      // We specify 2 possible modes for intrinsics, with/without rounding
      // modes.
      // First, we check if the intrinsic have rounding mode (7 operands),
      // if not, we set rounding mode to "current".
      SDValue Rnd;
      if (Op.getNumOperands() == 7)
        Rnd = Op.getOperand(6);
      else
        Rnd = DAG.getConstant(X86::STATIC_ROUNDING::CUR_DIRECTION, dl, MVT::i32);
      if (IntrData->Type == FIXUPIMM || IntrData->Type == FIXUPIMM_MASKZ)
        return getVectorMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT,
                                                Src1, Src2, Src3, Imm, Rnd),
                                    Mask, Passthru, Subtarget, DAG);
      else // Scalar - FIXUPIMMS, FIXUPIMMS_MASKZ
        return getScalarMaskingNode(DAG.getNode(IntrData->Opc0, dl, VT,
                                       Src1, Src2, Src3, Imm, Rnd),
                                    Mask, Passthru, Subtarget, DAG);
    }
    case CONVERT_TO_MASK: {
      MVT SrcVT = Op.getOperand(1).getSimpleValueType();
      MVT MaskVT = MVT::getVectorVT(MVT::i1, SrcVT.getVectorNumElements());
      MVT BitcastVT = MVT::getVectorVT(MVT::i1, VT.getSizeInBits());

      SDValue CvtMask = DAG.getNode(IntrData->Opc0, dl, MaskVT,
                                    Op.getOperand(1));
      SDValue Res = DAG.getNode(ISD::INSERT_SUBVECTOR, dl, BitcastVT,
                                DAG.getUNDEF(BitcastVT), CvtMask,
                                DAG.getIntPtrConstant(0, dl));
      return DAG.getBitcast(Op.getValueType(), Res);
    }
    case BRCST32x2_TO_VEC: {
      SDValue Src = Op.getOperand(1);
      SDValue PassThru = Op.getOperand(2);
      SDValue Mask = Op.getOperand(3);

      assert((VT.getScalarType() == MVT::i32 ||
              VT.getScalarType() == MVT::f32) && "Unexpected type!");
      //bitcast Src to packed 64
      MVT ScalarVT = VT.getScalarType() == MVT::i32 ? MVT::i64 : MVT::f64;
      MVT BitcastVT = MVT::getVectorVT(ScalarVT, Src.getValueSizeInBits()/64);
      Src = DAG.getBitcast(BitcastVT, Src);
      MVT ResVT = MVT::getVectorVT(ScalarVT, VT.getSizeInBits()/64);
      SDValue Res = DAG.getNode(IntrData->Opc0, dl, ResVT, Src);
      Res = DAG.getBitcast(VT, Res);

      return getVectorMaskingNode(Res, Mask, PassThru, Subtarget, DAG);
    }
    default:
      break;
    }
  }

  switch (IntNo) {
  default: return SDValue();    // Don't custom lower most intrinsics.

  case Intrinsic::x86_avx2_permd:
  case Intrinsic::x86_avx2_permps:
    // Operands intentionally swapped. Mask is last operand to intrinsic,
    // but second operand for node/instruction.
    return DAG.getNode(X86ISD::VPERMV, dl, Op.getValueType(),
                       Op.getOperand(2), Op.getOperand(1));

  // ptest and testp intrinsics. The intrinsic these come from are designed to
  // return an integer value, not just an instruction so lower it to the ptest
  // or testp pattern and a setcc for the result.
  case Intrinsic::x86_sse41_ptestz:
  case Intrinsic::x86_sse41_ptestc:
  case Intrinsic::x86_sse41_ptestnzc:
  case Intrinsic::x86_avx_ptestz_256:
  case Intrinsic::x86_avx_ptestc_256:
  case Intrinsic::x86_avx_ptestnzc_256:
  case Intrinsic::x86_avx_vtestz_ps:
  case Intrinsic::x86_avx_vtestc_ps:
  case Intrinsic::x86_avx_vtestnzc_ps:
  case Intrinsic::x86_avx_vtestz_pd:
  case Intrinsic::x86_avx_vtestc_pd:
  case Intrinsic::x86_avx_vtestnzc_pd:
  case Intrinsic::x86_avx_vtestz_ps_256:
  case Intrinsic::x86_avx_vtestc_ps_256:
  case Intrinsic::x86_avx_vtestnzc_ps_256:
  case Intrinsic::x86_avx_vtestz_pd_256:
  case Intrinsic::x86_avx_vtestc_pd_256:
  case Intrinsic::x86_avx_vtestnzc_pd_256: {
    bool IsTestPacked = false;
    X86::CondCode X86CC;
    switch (IntNo) {
    default: llvm_unreachable("Bad fallthrough in Intrinsic lowering.");
    case Intrinsic::x86_avx_vtestz_ps:
    case Intrinsic::x86_avx_vtestz_pd:
    case Intrinsic::x86_avx_vtestz_ps_256:
    case Intrinsic::x86_avx_vtestz_pd_256:
      IsTestPacked = true;
      LLVM_FALLTHROUGH;
    case Intrinsic::x86_sse41_ptestz:
    case Intrinsic::x86_avx_ptestz_256:
      // ZF = 1
      X86CC = X86::COND_E;
      break;
    case Intrinsic::x86_avx_vtestc_ps:
    case Intrinsic::x86_avx_vtestc_pd:
    case Intrinsic::x86_avx_vtestc_ps_256:
    case Intrinsic::x86_avx_vtestc_pd_256:
      IsTestPacked = true;
      LLVM_FALLTHROUGH;
    case Intrinsic::x86_sse41_ptestc:
    case Intrinsic::x86_avx_ptestc_256:
      // CF = 1
      X86CC = X86::COND_B;
      break;
    case Intrinsic::x86_avx_vtestnzc_ps:
    case Intrinsic::x86_avx_vtestnzc_pd:
    case Intrinsic::x86_avx_vtestnzc_ps_256:
    case Intrinsic::x86_avx_vtestnzc_pd_256:
      IsTestPacked = true;
      LLVM_FALLTHROUGH;
    case Intrinsic::x86_sse41_ptestnzc:
    case Intrinsic::x86_avx_ptestnzc_256:
      // ZF and CF = 0
      X86CC = X86::COND_A;
      break;
    }

    SDValue LHS = Op.getOperand(1);
    SDValue RHS = Op.getOperand(2);
    unsigned TestOpc = IsTestPacked ? X86ISD::TESTP : X86ISD::PTEST;
    SDValue Test = DAG.getNode(TestOpc, dl, MVT::i32, LHS, RHS);
    SDValue SetCC = getSETCC(X86CC, Test, dl, DAG);
    return DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::i32, SetCC);
  }
  case Intrinsic::x86_avx512_kortestz_w:
  case Intrinsic::x86_avx512_kortestc_w: {
    X86::CondCode X86CC =
        (IntNo == Intrinsic::x86_avx512_kortestz_w) ? X86::COND_E : X86::COND_B;
    SDValue LHS = DAG.getBitcast(MVT::v16i1, Op.getOperand(1));
    SDValue RHS = DAG.getBitcast(MVT::v16i1, Op.getOperand(2));
    SDValue Test = DAG.getNode(X86ISD::KORTEST, dl, MVT::i32, LHS, RHS);
    SDValue SetCC = getSETCC(X86CC, Test, dl, DAG);
    return DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::i32, SetCC);
  }

  case Intrinsic::x86_avx512_knot_w: {
    SDValue LHS = DAG.getBitcast(MVT::v16i1, Op.getOperand(1));
    SDValue RHS = DAG.getConstant(1, dl, MVT::v16i1);
    SDValue Res = DAG.getNode(ISD::XOR, dl, MVT::v16i1, LHS, RHS);
    return DAG.getBitcast(MVT::i16, Res);
  }

  case Intrinsic::x86_avx512_kandn_w: {
    SDValue LHS = DAG.getBitcast(MVT::v16i1, Op.getOperand(1));
    // Invert LHS for the not.
    LHS = DAG.getNode(ISD::XOR, dl, MVT::v16i1, LHS,
                      DAG.getConstant(1, dl, MVT::v16i1));
    SDValue RHS = DAG.getBitcast(MVT::v16i1, Op.getOperand(2));
    SDValue Res = DAG.getNode(ISD::AND, dl, MVT::v16i1, LHS, RHS);
    return DAG.getBitcast(MVT::i16, Res);
  }

  case Intrinsic::x86_avx512_kxnor_w: {
    SDValue LHS = DAG.getBitcast(MVT::v16i1, Op.getOperand(1));
    SDValue RHS = DAG.getBitcast(MVT::v16i1, Op.getOperand(2));
    SDValue Res = DAG.getNode(ISD::XOR, dl, MVT::v16i1, LHS, RHS);
    // Invert result for the not.
    Res = DAG.getNode(ISD::XOR, dl, MVT::v16i1, Res,
                      DAG.getConstant(1, dl, MVT::v16i1));
    return DAG.getBitcast(MVT::i16, Res);
  }

  case Intrinsic::x86_sse42_pcmpistria128:
  case Intrinsic::x86_sse42_pcmpestria128:
  case Intrinsic::x86_sse42_pcmpistric128:
  case Intrinsic::x86_sse42_pcmpestric128:
  case Intrinsic::x86_sse42_pcmpistrio128:
  case Intrinsic::x86_sse42_pcmpestrio128:
  case Intrinsic::x86_sse42_pcmpistris128:
  case Intrinsic::x86_sse42_pcmpestris128:
  case Intrinsic::x86_sse42_pcmpistriz128:
  case Intrinsic::x86_sse42_pcmpestriz128: {
    unsigned Opcode;
    X86::CondCode X86CC;
    switch (IntNo) {
    default: llvm_unreachable("Impossible intrinsic");  // Can't reach here.
    case Intrinsic::x86_sse42_pcmpistria128:
      Opcode = X86ISD::PCMPISTRI;
      X86CC = X86::COND_A;
      break;
    case Intrinsic::x86_sse42_pcmpestria128:
      Opcode = X86ISD::PCMPESTRI;
      X86CC = X86::COND_A;
      break;
    case Intrinsic::x86_sse42_pcmpistric128:
      Opcode = X86ISD::PCMPISTRI;
      X86CC = X86::COND_B;
      break;
    case Intrinsic::x86_sse42_pcmpestric128:
      Opcode = X86ISD::PCMPESTRI;
      X86CC = X86::COND_B;
      break;
    case Intrinsic::x86_sse42_pcmpistrio128:
      Opcode = X86ISD::PCMPISTRI;
      X86CC = X86::COND_O;
      break;
    case Intrinsic::x86_sse42_pcmpestrio128:
      Opcode = X86ISD::PCMPESTRI;
      X86CC = X86::COND_O;
      break;
    case Intrinsic::x86_sse42_pcmpistris128:
      Opcode = X86ISD::PCMPISTRI;
      X86CC = X86::COND_S;
      break;
    case Intrinsic::x86_sse42_pcmpestris128:
      Opcode = X86ISD::PCMPESTRI;
      X86CC = X86::COND_S;
      break;
    case Intrinsic::x86_sse42_pcmpistriz128:
      Opcode = X86ISD::PCMPISTRI;
      X86CC = X86::COND_E;
      break;
    case Intrinsic::x86_sse42_pcmpestriz128:
      Opcode = X86ISD::PCMPESTRI;
      X86CC = X86::COND_E;
      break;
    }
    SmallVector<SDValue, 5> NewOps(Op->op_begin()+1, Op->op_end());
    SDVTList VTs = DAG.getVTList(Op.getValueType(), MVT::i32);
    SDValue PCMP = DAG.getNode(Opcode, dl, VTs, NewOps);
    SDValue SetCC = getSETCC(X86CC, SDValue(PCMP.getNode(), 1), dl, DAG);
    return DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::i32, SetCC);
  }

  case Intrinsic::x86_sse42_pcmpistri128:
  case Intrinsic::x86_sse42_pcmpestri128: {
    unsigned Opcode;
    if (IntNo == Intrinsic::x86_sse42_pcmpistri128)
      Opcode = X86ISD::PCMPISTRI;
    else
      Opcode = X86ISD::PCMPESTRI;

    SmallVector<SDValue, 5> NewOps(Op->op_begin()+1, Op->op_end());
    SDVTList VTs = DAG.getVTList(Op.getValueType(), MVT::i32);
    return DAG.getNode(Opcode, dl, VTs, NewOps);
  }

  case Intrinsic::eh_sjlj_lsda: {
    MachineFunction &MF = DAG.getMachineFunction();
    const TargetLowering &TLI = DAG.getTargetLoweringInfo();
    MVT PtrVT = TLI.getPointerTy(DAG.getDataLayout());
    auto &Context = MF.getMMI().getContext();
    MCSymbol *S = Context.getOrCreateSymbol(Twine("GCC_except_table") +
                                            Twine(MF.getFunctionNumber()));
    return DAG.getNode(getGlobalWrapperKind(), dl, VT,
                       DAG.getMCSymbol(S, PtrVT));
  }

  case Intrinsic::x86_seh_lsda: {
    // Compute the symbol for the LSDA. We know it'll get emitted later.
    MachineFunction &MF = DAG.getMachineFunction();
    SDValue Op1 = Op.getOperand(1);
    auto *Fn = cast<Function>(cast<GlobalAddressSDNode>(Op1)->getGlobal());
    MCSymbol *LSDASym = MF.getMMI().getContext().getOrCreateLSDASymbol(
        GlobalValue::dropLLVMManglingEscape(Fn->getName()));

    // Generate a simple absolute symbol reference. This intrinsic is only
    // supported on 32-bit Windows, which isn't PIC.
    SDValue Result = DAG.getMCSymbol(LSDASym, VT);
    return DAG.getNode(X86ISD::Wrapper, dl, VT, Result);
  }

  case Intrinsic::x86_seh_recoverfp: {
    SDValue FnOp = Op.getOperand(1);
    SDValue IncomingFPOp = Op.getOperand(2);
    GlobalAddressSDNode *GSD = dyn_cast<GlobalAddressSDNode>(FnOp);
    auto *Fn = dyn_cast_or_null<Function>(GSD ? GSD->getGlobal() : nullptr);
    if (!Fn)
      report_fatal_error(
          "llvm.x86.seh.recoverfp must take a function as the first argument");
    return recoverFramePointer(DAG, Fn, IncomingFPOp);
  }

  case Intrinsic::localaddress: {
    // Returns one of the stack, base, or frame pointer registers, depending on
    // which is used to reference local variables.
    MachineFunction &MF = DAG.getMachineFunction();
    const X86RegisterInfo *RegInfo = Subtarget.getRegisterInfo();
    unsigned Reg;
    if (RegInfo->hasBasePointer(MF))
      Reg = RegInfo->getBaseRegister();
    else // This function handles the SP or FP case.
      Reg = RegInfo->getPtrSizedFrameRegister(MF);
    return DAG.getCopyFromReg(DAG.getEntryNode(), dl, Reg, VT);
  }
  }
}

static SDValue getAVX2GatherNode(unsigned Opc, SDValue Op, SelectionDAG &DAG,
                                 SDValue Src, SDValue Mask, SDValue Base,
                                 SDValue Index, SDValue ScaleOp, SDValue Chain,
                                 const X86Subtarget &Subtarget) {
  SDLoc dl(Op);
  auto *C = dyn_cast<ConstantSDNode>(ScaleOp);
  // Scale must be constant.
  if (!C)
    return SDValue();
  SDValue Scale = DAG.getTargetConstant(C->getZExtValue(), dl, MVT::i8);
  EVT MaskVT = Mask.getValueType();
  SDVTList VTs = DAG.getVTList(Op.getValueType(), MaskVT, MVT::Other);
  SDValue Disp = DAG.getTargetConstant(0, dl, MVT::i32);
  SDValue Segment = DAG.getRegister(0, MVT::i32);
  // If source is undef or we know it won't be used, use a zero vector
  // to break register dependency.
  // TODO: use undef instead and let ExecutionDepsFix deal with it?
  if (Src.isUndef() || ISD::isBuildVectorAllOnes(Mask.getNode()))
    Src = getZeroVector(Op.getSimpleValueType(), Subtarget, DAG, dl);
  SDValue Ops[] = {Src, Base, Scale, Index, Disp, Segment, Mask, Chain};
  SDNode *Res = DAG.getMachineNode(Opc, dl, VTs, Ops);
  SDValue RetOps[] = { SDValue(Res, 0), SDValue(Res, 2) };
  return DAG.getMergeValues(RetOps, dl);
}

static SDValue getGatherNode(unsigned Opc, SDValue Op, SelectionDAG &DAG,
                              SDValue Src, SDValue Mask, SDValue Base,
                              SDValue Index, SDValue ScaleOp, SDValue Chain,
                              const X86Subtarget &Subtarget) {
  SDLoc dl(Op);
  auto *C = dyn_cast<ConstantSDNode>(ScaleOp);
  // Scale must be constant.
  if (!C)
    return SDValue();
  SDValue Scale = DAG.getTargetConstant(C->getZExtValue(), dl, MVT::i8);
  MVT MaskVT = MVT::getVectorVT(MVT::i1,
                             Index.getSimpleValueType().getVectorNumElements());

  SDValue VMask = getMaskNode(Mask, MaskVT, Subtarget, DAG, dl);
  SDVTList VTs = DAG.getVTList(Op.getValueType(), MaskVT, MVT::Other);
  SDValue Disp = DAG.getTargetConstant(0, dl, MVT::i32);
  SDValue Segment = DAG.getRegister(0, MVT::i32);
  // If source is undef or we know it won't be used, use a zero vector
  // to break register dependency.
  // TODO: use undef instead and let ExecutionDepsFix deal with it?
  if (Src.isUndef() || ISD::isBuildVectorAllOnes(VMask.getNode()))
    Src = getZeroVector(Op.getSimpleValueType(), Subtarget, DAG, dl);
  SDValue Ops[] = {Src, VMask, Base, Scale, Index, Disp, Segment, Chain};
  SDNode *Res = DAG.getMachineNode(Opc, dl, VTs, Ops);
  SDValue RetOps[] = { SDValue(Res, 0), SDValue(Res, 2) };
  return DAG.getMergeValues(RetOps, dl);
}

static SDValue getScatterNode(unsigned Opc, SDValue Op, SelectionDAG &DAG,
                               SDValue Src, SDValue Mask, SDValue Base,
                               SDValue Index, SDValue ScaleOp, SDValue Chain,
                               const X86Subtarget &Subtarget) {
  SDLoc dl(Op);
  auto *C = dyn_cast<ConstantSDNode>(ScaleOp);
  // Scale must be constant.
  if (!C)
    return SDValue();
  SDValue Scale = DAG.getTargetConstant(C->getZExtValue(), dl, MVT::i8);
  SDValue Disp = DAG.getTargetConstant(0, dl, MVT::i32);
  SDValue Segment = DAG.getRegister(0, MVT::i32);
  MVT MaskVT = MVT::getVectorVT(MVT::i1,
                             Index.getSimpleValueType().getVectorNumElements());

  SDValue VMask = getMaskNode(Mask, MaskVT, Subtarget, DAG, dl);
  SDVTList VTs = DAG.getVTList(MaskVT, MVT::Other);
  SDValue Ops[] = {Base, Scale, Index, Disp, Segment, VMask, Src, Chain};
  SDNode *Res = DAG.getMachineNode(Opc, dl, VTs, Ops);
  return SDValue(Res, 1);
}

static SDValue getPrefetchNode(unsigned Opc, SDValue Op, SelectionDAG &DAG,
                               SDValue Mask, SDValue Base, SDValue Index,
                               SDValue ScaleOp, SDValue Chain,
                               const X86Subtarget &Subtarget) {
  SDLoc dl(Op);
  auto *C = dyn_cast<ConstantSDNode>(ScaleOp);
  // Scale must be constant.
  if (!C)
    return SDValue();
  SDValue Scale = DAG.getTargetConstant(C->getZExtValue(), dl, MVT::i8);
  SDValue Disp = DAG.getTargetConstant(0, dl, MVT::i32);
  SDValue Segment = DAG.getRegister(0, MVT::i32);
  MVT MaskVT =
    MVT::getVectorVT(MVT::i1, Index.getSimpleValueType().getVectorNumElements());
  SDValue VMask = getMaskNode(Mask, MaskVT, Subtarget, DAG, dl);
  SDValue Ops[] = {VMask, Base, Scale, Index, Disp, Segment, Chain};
  SDNode *Res = DAG.getMachineNode(Opc, dl, MVT::Other, Ops);
  return SDValue(Res, 0);
}

/// Handles the lowering of builtin intrinsic that return the value
/// of the extended control register.
static void getExtendedControlRegister(SDNode *N, const SDLoc &DL,
                                       SelectionDAG &DAG,
                                       const X86Subtarget &Subtarget,
                                       SmallVectorImpl<SDValue> &Results) {
  assert(N->getNumOperands() == 3 && "Unexpected number of operands!");
  SDVTList Tys = DAG.getVTList(MVT::Other, MVT::Glue);
  SDValue LO, HI;

  // The ECX register is used to select the index of the XCR register to
  // return.
  SDValue Chain =
      DAG.getCopyToReg(N->getOperand(0), DL, X86::ECX, N->getOperand(2));
  SDNode *N1 = DAG.getMachineNode(X86::XGETBV, DL, Tys, Chain);
  Chain = SDValue(N1, 0);

  // Reads the content of XCR and returns it in registers EDX:EAX.
  if (Subtarget.is64Bit()) {
    LO = DAG.getCopyFromReg(Chain, DL, X86::RAX, MVT::i64, SDValue(N1, 1));
    HI = DAG.getCopyFromReg(LO.getValue(1), DL, X86::RDX, MVT::i64,
                            LO.getValue(2));
  } else {
    LO = DAG.getCopyFromReg(Chain, DL, X86::EAX, MVT::i32, SDValue(N1, 1));
    HI = DAG.getCopyFromReg(LO.getValue(1), DL, X86::EDX, MVT::i32,
                            LO.getValue(2));
  }
  Chain = HI.getValue(1);

  if (Subtarget.is64Bit()) {
    // Merge the two 32-bit values into a 64-bit one..
    SDValue Tmp = DAG.getNode(ISD::SHL, DL, MVT::i64, HI,
                              DAG.getConstant(32, DL, MVT::i8));
    Results.push_back(DAG.getNode(ISD::OR, DL, MVT::i64, LO, Tmp));
    Results.push_back(Chain);
    return;
  }

  // Use a buildpair to merge the two 32-bit values into a 64-bit one.
  SDValue Ops[] = { LO, HI };
  SDValue Pair = DAG.getNode(ISD::BUILD_PAIR, DL, MVT::i64, Ops);
  Results.push_back(Pair);
  Results.push_back(Chain);
}

/// Handles the lowering of builtin intrinsics that read performance monitor
/// counters (x86_rdpmc).
static void getReadPerformanceCounter(SDNode *N, const SDLoc &DL,
                                      SelectionDAG &DAG,
                                      const X86Subtarget &Subtarget,
                                      SmallVectorImpl<SDValue> &Results) {
  assert(N->getNumOperands() == 3 && "Unexpected number of operands!");
  SDVTList Tys = DAG.getVTList(MVT::Other, MVT::Glue);
  SDValue LO, HI;

  // The ECX register is used to select the index of the performance counter
  // to read.
  SDValue Chain = DAG.getCopyToReg(N->getOperand(0), DL, X86::ECX,
                                   N->getOperand(2));
  SDValue rd = DAG.getNode(X86ISD::RDPMC_DAG, DL, Tys, Chain);

  // Reads the content of a 64-bit performance counter and returns it in the
  // registers EDX:EAX.
  if (Subtarget.is64Bit()) {
    LO = DAG.getCopyFromReg(rd, DL, X86::RAX, MVT::i64, rd.getValue(1));
    HI = DAG.getCopyFromReg(LO.getValue(1), DL, X86::RDX, MVT::i64,
                            LO.getValue(2));
  } else {
    LO = DAG.getCopyFromReg(rd, DL, X86::EAX, MVT::i32, rd.getValue(1));
    HI = DAG.getCopyFromReg(LO.getValue(1), DL, X86::EDX, MVT::i32,
                            LO.getValue(2));
  }
  Chain = HI.getValue(1);

  if (Subtarget.is64Bit()) {
    // The EAX register is loaded with the low-order 32 bits. The EDX register
    // is loaded with the supported high-order bits of the counter.
    SDValue Tmp = DAG.getNode(ISD::SHL, DL, MVT::i64, HI,
                              DAG.getConstant(32, DL, MVT::i8));
    Results.push_back(DAG.getNode(ISD::OR, DL, MVT::i64, LO, Tmp));
    Results.push_back(Chain);
    return;
  }

  // Use a buildpair to merge the two 32-bit values into a 64-bit one.
  SDValue Ops[] = { LO, HI };
  SDValue Pair = DAG.getNode(ISD::BUILD_PAIR, DL, MVT::i64, Ops);
  Results.push_back(Pair);
  Results.push_back(Chain);
}

/// Handles the lowering of builtin intrinsics that read the time stamp counter
/// (x86_rdtsc and x86_rdtscp). This function is also used to custom lower
/// READCYCLECOUNTER nodes.
static void getReadTimeStampCounter(SDNode *N, const SDLoc &DL, unsigned Opcode,
                                    SelectionDAG &DAG,
                                    const X86Subtarget &Subtarget,
                                    SmallVectorImpl<SDValue> &Results) {
  SDVTList Tys = DAG.getVTList(MVT::Other, MVT::Glue);
  SDValue rd = DAG.getNode(Opcode, DL, Tys, N->getOperand(0));
  SDValue LO, HI;

  // The processor's time-stamp counter (a 64-bit MSR) is stored into the
  // EDX:EAX registers. EDX is loaded with the high-order 32 bits of the MSR
  // and the EAX register is loaded with the low-order 32 bits.
  if (Subtarget.is64Bit()) {
    LO = DAG.getCopyFromReg(rd, DL, X86::RAX, MVT::i64, rd.getValue(1));
    HI = DAG.getCopyFromReg(LO.getValue(1), DL, X86::RDX, MVT::i64,
                            LO.getValue(2));
  } else {
    LO = DAG.getCopyFromReg(rd, DL, X86::EAX, MVT::i32, rd.getValue(1));
    HI = DAG.getCopyFromReg(LO.getValue(1), DL, X86::EDX, MVT::i32,
                            LO.getValue(2));
  }
  SDValue Chain = HI.getValue(1);

  if (Opcode == X86ISD::RDTSCP_DAG) {
    assert(N->getNumOperands() == 3 && "Unexpected number of operands!");

    // Instruction RDTSCP loads the IA32:TSC_AUX_MSR (address C000_0103H) into
    // the ECX register. Add 'ecx' explicitly to the chain.
    SDValue ecx = DAG.getCopyFromReg(Chain, DL, X86::ECX, MVT::i32,
                                     HI.getValue(2));
    // Explicitly store the content of ECX at the location passed in input
    // to the 'rdtscp' intrinsic.
    Chain = DAG.getStore(ecx.getValue(1), DL, ecx, N->getOperand(2),
                         MachinePointerInfo());
  }

  if (Subtarget.is64Bit()) {
    // The EDX register is loaded with the high-order 32 bits of the MSR, and
    // the EAX register is loaded with the low-order 32 bits.
    SDValue Tmp = DAG.getNode(ISD::SHL, DL, MVT::i64, HI,
                              DAG.getConstant(32, DL, MVT::i8));
    Results.push_back(DAG.getNode(ISD::OR, DL, MVT::i64, LO, Tmp));
    Results.push_back(Chain);
    return;
  }

  // Use a buildpair to merge the two 32-bit values into a 64-bit one.
  SDValue Ops[] = { LO, HI };
  SDValue Pair = DAG.getNode(ISD::BUILD_PAIR, DL, MVT::i64, Ops);
  Results.push_back(Pair);
  Results.push_back(Chain);
}

static SDValue LowerREADCYCLECOUNTER(SDValue Op, const X86Subtarget &Subtarget,
                                     SelectionDAG &DAG) {
  SmallVector<SDValue, 2> Results;
  SDLoc DL(Op);
  getReadTimeStampCounter(Op.getNode(), DL, X86ISD::RDTSC_DAG, DAG, Subtarget,
                          Results);
  return DAG.getMergeValues(Results, DL);
}

static SDValue MarkEHRegistrationNode(SDValue Op, SelectionDAG &DAG) {
  MachineFunction &MF = DAG.getMachineFunction();
  SDValue Chain = Op.getOperand(0);
  SDValue RegNode = Op.getOperand(2);
  WinEHFuncInfo *EHInfo = MF.getWinEHFuncInfo();
  if (!EHInfo)
    report_fatal_error("EH registrations only live in functions using WinEH");

  // Cast the operand to an alloca, and remember the frame index.
  auto *FINode = dyn_cast<FrameIndexSDNode>(RegNode);
  if (!FINode)
    report_fatal_error("llvm.x86.seh.ehregnode expects a static alloca");
  EHInfo->EHRegNodeFrameIndex = FINode->getIndex();

  // Return the chain operand without making any DAG nodes.
  return Chain;
}

static SDValue MarkEHGuard(SDValue Op, SelectionDAG &DAG) {
  MachineFunction &MF = DAG.getMachineFunction();
  SDValue Chain = Op.getOperand(0);
  SDValue EHGuard = Op.getOperand(2);
  WinEHFuncInfo *EHInfo = MF.getWinEHFuncInfo();
  if (!EHInfo)
    report_fatal_error("EHGuard only live in functions using WinEH");

  // Cast the operand to an alloca, and remember the frame index.
  auto *FINode = dyn_cast<FrameIndexSDNode>(EHGuard);
  if (!FINode)
    report_fatal_error("llvm.x86.seh.ehguard expects a static alloca");
  EHInfo->EHGuardFrameIndex = FINode->getIndex();

  // Return the chain operand without making any DAG nodes.
  return Chain;
}

/// Emit Truncating Store with signed or unsigned saturation.
static SDValue
EmitTruncSStore(bool SignedSat, SDValue Chain, const SDLoc &Dl, SDValue Val,
                SDValue Ptr, EVT MemVT, MachineMemOperand *MMO,
                SelectionDAG &DAG) {

  SDVTList VTs = DAG.getVTList(MVT::Other);
  SDValue Undef = DAG.getUNDEF(Ptr.getValueType());
  SDValue Ops[] = { Chain, Val, Ptr, Undef };
  return SignedSat ?
    DAG.getTargetMemSDNode<TruncSStoreSDNode>(VTs, Ops, Dl, MemVT, MMO) :
    DAG.getTargetMemSDNode<TruncUSStoreSDNode>(VTs, Ops, Dl, MemVT, MMO);
}

/// Emit Masked Truncating Store with signed or unsigned saturation.
static SDValue
EmitMaskedTruncSStore(bool SignedSat, SDValue Chain, const SDLoc &Dl,
                      SDValue Val, SDValue Ptr, SDValue Mask, EVT MemVT,
                      MachineMemOperand *MMO, SelectionDAG &DAG) {

  SDVTList VTs = DAG.getVTList(MVT::Other);
  SDValue Ops[] = { Chain, Ptr, Mask, Val };
  return SignedSat ?
    DAG.getTargetMemSDNode<MaskedTruncSStoreSDNode>(VTs, Ops, Dl, MemVT, MMO) :
    DAG.getTargetMemSDNode<MaskedTruncUSStoreSDNode>(VTs, Ops, Dl, MemVT, MMO);
}

static SDValue LowerINTRINSIC_W_CHAIN(SDValue Op, const X86Subtarget &Subtarget,
                                      SelectionDAG &DAG) {
  unsigned IntNo = cast<ConstantSDNode>(Op.getOperand(1))->getZExtValue();

  const IntrinsicData *IntrData = getIntrinsicWithChain(IntNo);
  if (!IntrData) {
    switch (IntNo) {
    case llvm::Intrinsic::x86_seh_ehregnode:
      return MarkEHRegistrationNode(Op, DAG);
    case llvm::Intrinsic::x86_seh_ehguard:
      return MarkEHGuard(Op, DAG);
    case llvm::Intrinsic::x86_flags_read_u32:
    case llvm::Intrinsic::x86_flags_read_u64:
    case llvm::Intrinsic::x86_flags_write_u32:
    case llvm::Intrinsic::x86_flags_write_u64: {
      // We need a frame pointer because this will get lowered to a PUSH/POP
      // sequence.
      MachineFrameInfo &MFI = DAG.getMachineFunction().getFrameInfo();
      MFI.setHasCopyImplyingStackAdjustment(true);
      // Don't do anything here, we will expand these intrinsics out later
      // during ExpandISelPseudos in EmitInstrWithCustomInserter.
      return SDValue();
    }
    case Intrinsic::x86_lwpins32:
    case Intrinsic::x86_lwpins64: {
      SDLoc dl(Op);
      SDValue Chain = Op->getOperand(0);
      SDVTList VTs = DAG.getVTList(MVT::i32, MVT::Other);
      SDValue LwpIns =
          DAG.getNode(X86ISD::LWPINS, dl, VTs, Chain, Op->getOperand(2),
                      Op->getOperand(3), Op->getOperand(4));
      SDValue SetCC = getSETCC(X86::COND_B, LwpIns.getValue(0), dl, DAG);
      SDValue Result = DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::i8, SetCC);
      return DAG.getNode(ISD::MERGE_VALUES, dl, Op->getVTList(), Result,
                         LwpIns.getValue(1));
    }
    }
    return SDValue();
  }

  SDLoc dl(Op);
  switch(IntrData->Type) {
  default: llvm_unreachable("Unknown Intrinsic Type");
  case RDSEED:
  case RDRAND: {
    // Emit the node with the right value type.
    SDVTList VTs = DAG.getVTList(Op->getValueType(0), MVT::i32, MVT::Other);
    SDValue Result = DAG.getNode(IntrData->Opc0, dl, VTs, Op.getOperand(0));

    // If the value returned by RDRAND/RDSEED was valid (CF=1), return 1.
    // Otherwise return the value from Rand, which is always 0, casted to i32.
    SDValue Ops[] = { DAG.getZExtOrTrunc(Result, dl, Op->getValueType(1)),
                      DAG.getConstant(1, dl, Op->getValueType(1)),
                      DAG.getConstant(X86::COND_B, dl, MVT::i8),
                      SDValue(Result.getNode(), 1) };
    SDValue isValid = DAG.getNode(X86ISD::CMOV, dl, Op->getValueType(1), Ops);

    // Return { result, isValid, chain }.
    return DAG.getNode(ISD::MERGE_VALUES, dl, Op->getVTList(), Result, isValid,
                       SDValue(Result.getNode(), 2));
  }
  case GATHER_AVX2: {
    SDValue Chain = Op.getOperand(0);
    SDValue Src   = Op.getOperand(2);
    SDValue Base  = Op.getOperand(3);
    SDValue Index = Op.getOperand(4);
    SDValue Mask  = Op.getOperand(5);
    SDValue Scale = Op.getOperand(6);
    return getAVX2GatherNode(IntrData->Opc0, Op, DAG, Src, Mask, Base, Index,
                             Scale, Chain, Subtarget);
  }
  case GATHER: {
  //gather(v1, mask, index, base, scale);
    SDValue Chain = Op.getOperand(0);
    SDValue Src   = Op.getOperand(2);
    SDValue Base  = Op.getOperand(3);
    SDValue Index = Op.getOperand(4);
    SDValue Mask  = Op.getOperand(5);
    SDValue Scale = Op.getOperand(6);
    return getGatherNode(IntrData->Opc0, Op, DAG, Src, Mask, Base, Index, Scale,
                         Chain, Subtarget);
  }
  case SCATTER: {
  //scatter(base, mask, index, v1, scale);
    SDValue Chain = Op.getOperand(0);
    SDValue Base  = Op.getOperand(2);
    SDValue Mask  = Op.getOperand(3);
    SDValue Index = Op.getOperand(4);
    SDValue Src   = Op.getOperand(5);
    SDValue Scale = Op.getOperand(6);
    return getScatterNode(IntrData->Opc0, Op, DAG, Src, Mask, Base, Index,
                          Scale, Chain, Subtarget);
  }
  case PREFETCH: {
    SDValue Hint = Op.getOperand(6);
    unsigned HintVal = cast<ConstantSDNode>(Hint)->getZExtValue();
    assert((HintVal == 2 || HintVal == 3) &&
           "Wrong prefetch hint in intrinsic: should be 2 or 3");
    unsigned Opcode = (HintVal == 2 ? IntrData->Opc1 : IntrData->Opc0);
    SDValue Chain = Op.getOperand(0);
    SDValue Mask  = Op.getOperand(2);
    SDValue Index = Op.getOperand(3);
    SDValue Base  = Op.getOperand(4);
    SDValue Scale = Op.getOperand(5);
    return getPrefetchNode(Opcode, Op, DAG, Mask, Base, Index, Scale, Chain,
                           Subtarget);
  }
  // Read Time Stamp Counter (RDTSC) and Processor ID (RDTSCP).
  case RDTSC: {
    SmallVector<SDValue, 2> Results;
    getReadTimeStampCounter(Op.getNode(), dl, IntrData->Opc0, DAG, Subtarget,
                            Results);
    return DAG.getMergeValues(Results, dl);
  }
  // Read Performance Monitoring Counters.
  case RDPMC: {
    SmallVector<SDValue, 2> Results;
    getReadPerformanceCounter(Op.getNode(), dl, DAG, Subtarget, Results);
    return DAG.getMergeValues(Results, dl);
  }
  // Get Extended Control Register.
  case XGETBV: {
    SmallVector<SDValue, 2> Results;
    getExtendedControlRegister(Op.getNode(), dl, DAG, Subtarget, Results);
    return DAG.getMergeValues(Results, dl);
  }
  // XTEST intrinsics.
  case XTEST: {
    SDVTList VTs = DAG.getVTList(Op->getValueType(0), MVT::Other);
    SDValue InTrans = DAG.getNode(IntrData->Opc0, dl, VTs, Op.getOperand(0));

    SDValue SetCC = getSETCC(X86::COND_NE, InTrans, dl, DAG);
    SDValue Ret = DAG.getNode(ISD::ZERO_EXTEND, dl, Op->getValueType(0), SetCC);
    return DAG.getNode(ISD::MERGE_VALUES, dl, Op->getVTList(),
                       Ret, SDValue(InTrans.getNode(), 1));
  }
  // ADC/ADCX/SBB
  case ADX: {
    SDVTList CFVTs = DAG.getVTList(Op->getValueType(0), MVT::i32);
    SDVTList VTs = DAG.getVTList(Op.getOperand(3)->getValueType(0), MVT::i32);
    SDValue GenCF = DAG.getNode(X86ISD::ADD, dl, CFVTs, Op.getOperand(2),
                                DAG.getConstant(-1, dl, MVT::i8));
    SDValue Res = DAG.getNode(IntrData->Opc0, dl, VTs, Op.getOperand(3),
                              Op.getOperand(4), GenCF.getValue(1));
    SDValue Store = DAG.getStore(Op.getOperand(0), dl, Res.getValue(0),
                                 Op.getOperand(5), MachinePointerInfo());
    SDValue SetCC = getSETCC(X86::COND_B, Res.getValue(1), dl, DAG);
    SDValue Results[] = { SetCC, Store };
    return DAG.getMergeValues(Results, dl);
  }
  case COMPRESS_TO_MEM: {
    SDValue Mask = Op.getOperand(4);
    SDValue DataToCompress = Op.getOperand(3);
    SDValue Addr = Op.getOperand(2);
    SDValue Chain = Op.getOperand(0);
    MVT VT = DataToCompress.getSimpleValueType();

    MemIntrinsicSDNode *MemIntr = dyn_cast<MemIntrinsicSDNode>(Op);
    assert(MemIntr && "Expected MemIntrinsicSDNode!");

    if (isAllOnesConstant(Mask)) // return just a store
      return DAG.getStore(Chain, dl, DataToCompress, Addr,
                          MemIntr->getMemOperand());

    MVT MaskVT = MVT::getVectorVT(MVT::i1, VT.getVectorNumElements());
    SDValue VMask = getMaskNode(Mask, MaskVT, Subtarget, DAG, dl);

    return DAG.getMaskedStore(Chain, dl, DataToCompress, Addr, VMask, VT,
                              MemIntr->getMemOperand(),
                              false /* truncating */, true /* compressing */);
  }
  case TRUNCATE_TO_MEM_VI8:
  case TRUNCATE_TO_MEM_VI16:
  case TRUNCATE_TO_MEM_VI32: {
    SDValue Mask = Op.getOperand(4);
    SDValue DataToTruncate = Op.getOperand(3);
    SDValue Addr = Op.getOperand(2);
    SDValue Chain = Op.getOperand(0);

    MemIntrinsicSDNode *MemIntr = dyn_cast<MemIntrinsicSDNode>(Op);
    assert(MemIntr && "Expected MemIntrinsicSDNode!");

    EVT MemVT  = MemIntr->getMemoryVT();

    uint16_t TruncationOp = IntrData->Opc0;
    switch (TruncationOp) {
    case X86ISD::VTRUNC: {
      if (isAllOnesConstant(Mask)) // return just a truncate store
        return DAG.getTruncStore(Chain, dl, DataToTruncate, Addr, MemVT,
                                 MemIntr->getMemOperand());

      MVT MaskVT = MVT::getVectorVT(MVT::i1, MemVT.getVectorNumElements());
      SDValue VMask = getMaskNode(Mask, MaskVT, Subtarget, DAG, dl);

      return DAG.getMaskedStore(Chain, dl, DataToTruncate, Addr, VMask, MemVT,
                                MemIntr->getMemOperand(), true /* truncating */);
    }
    case X86ISD::VTRUNCUS:
    case X86ISD::VTRUNCS: {
      bool IsSigned = (TruncationOp == X86ISD::VTRUNCS);
      if (isAllOnesConstant(Mask))
        return EmitTruncSStore(IsSigned, Chain, dl, DataToTruncate, Addr, MemVT,
                               MemIntr->getMemOperand(), DAG);

      MVT MaskVT = MVT::getVectorVT(MVT::i1, MemVT.getVectorNumElements());
      SDValue VMask = getMaskNode(Mask, MaskVT, Subtarget, DAG, dl);

      return EmitMaskedTruncSStore(IsSigned, Chain, dl, DataToTruncate, Addr,
                                   VMask, MemVT, MemIntr->getMemOperand(), DAG);
    }
    default:
      llvm_unreachable("Unsupported truncstore intrinsic");
    }
  }

  case EXPAND_FROM_MEM: {
    SDValue Mask = Op.getOperand(4);
    SDValue PassThru = Op.getOperand(3);
    SDValue Addr = Op.getOperand(2);
    SDValue Chain = Op.getOperand(0);
    MVT VT = Op.getSimpleValueType();

    MemIntrinsicSDNode *MemIntr = dyn_cast<MemIntrinsicSDNode>(Op);
    assert(MemIntr && "Expected MemIntrinsicSDNode!");

    if (isAllOnesConstant(Mask)) // Return a regular (unmasked) vector load.
      return DAG.getLoad(VT, dl, Chain, Addr, MemIntr->getMemOperand());
    if (X86::isZeroNode(Mask))
      return DAG.getUNDEF(VT);

    MVT MaskVT = MVT::getVectorVT(MVT::i1, VT.getVectorNumElements());
    SDValue VMask = getMaskNode(Mask, MaskVT, Subtarget, DAG, dl);
    return DAG.getMaskedLoad(VT, dl, Chain, Addr, VMask, PassThru, VT,
                             MemIntr->getMemOperand(), ISD::NON_EXTLOAD,
                             true /* expanding */);
  }
  }
}

SDValue X86TargetLowering::LowerRETURNADDR(SDValue Op,
                                           SelectionDAG &DAG) const {
  MachineFrameInfo &MFI = DAG.getMachineFunction().getFrameInfo();
  MFI.setReturnAddressIsTaken(true);

  if (verifyReturnAddressArgumentIsConstant(Op, DAG))
    return SDValue();

  unsigned Depth = cast<ConstantSDNode>(Op.getOperand(0))->getZExtValue();
  SDLoc dl(Op);
  EVT PtrVT = getPointerTy(DAG.getDataLayout());

  if (Depth > 0) {
    SDValue FrameAddr = LowerFRAMEADDR(Op, DAG);
    const X86RegisterInfo *RegInfo = Subtarget.getRegisterInfo();
    SDValue Offset = DAG.getConstant(RegInfo->getSlotSize(), dl, PtrVT);
    return DAG.getLoad(PtrVT, dl, DAG.getEntryNode(),
                       DAG.getNode(ISD::ADD, dl, PtrVT, FrameAddr, Offset),
                       MachinePointerInfo());
  }

  // Just load the return address.
  SDValue RetAddrFI = getReturnAddressFrameIndex(DAG);
  return DAG.getLoad(PtrVT, dl, DAG.getEntryNode(), RetAddrFI,
                     MachinePointerInfo());
}

SDValue X86TargetLowering::LowerADDROFRETURNADDR(SDValue Op,
                                                 SelectionDAG &DAG) const {
  DAG.getMachineFunction().getFrameInfo().setReturnAddressIsTaken(true);
  return getReturnAddressFrameIndex(DAG);
}

SDValue X86TargetLowering::LowerFRAMEADDR(SDValue Op, SelectionDAG &DAG) const {
  MachineFunction &MF = DAG.getMachineFunction();
  MachineFrameInfo &MFI = MF.getFrameInfo();
  X86MachineFunctionInfo *FuncInfo = MF.getInfo<X86MachineFunctionInfo>();
  const X86RegisterInfo *RegInfo = Subtarget.getRegisterInfo();
  EVT VT = Op.getValueType();

  MFI.setFrameAddressIsTaken(true);

  if (MF.getTarget().getMCAsmInfo()->usesWindowsCFI()) {
    // Depth > 0 makes no sense on targets which use Windows unwind codes.  It
    // is not possible to crawl up the stack without looking at the unwind codes
    // simultaneously.
    int FrameAddrIndex = FuncInfo->getFAIndex();
    if (!FrameAddrIndex) {
      // Set up a frame object for the return address.
      unsigned SlotSize = RegInfo->getSlotSize();
      FrameAddrIndex = MF.getFrameInfo().CreateFixedObject(
          SlotSize, /*Offset=*/0, /*IsImmutable=*/false);
      FuncInfo->setFAIndex(FrameAddrIndex);
    }
    return DAG.getFrameIndex(FrameAddrIndex, VT);
  }

  unsigned FrameReg =
      RegInfo->getPtrSizedFrameRegister(DAG.getMachineFunction());
  SDLoc dl(Op);  // FIXME probably not meaningful
  unsigned Depth = cast<ConstantSDNode>(Op.getOperand(0))->getZExtValue();
  assert(((FrameReg == X86::RBP && VT == MVT::i64) ||
          (FrameReg == X86::EBP && VT == MVT::i32)) &&
         "Invalid Frame Register!");
  SDValue FrameAddr = DAG.getCopyFromReg(DAG.getEntryNode(), dl, FrameReg, VT);
  while (Depth--)
    FrameAddr = DAG.getLoad(VT, dl, DAG.getEntryNode(), FrameAddr,
                            MachinePointerInfo());
  return FrameAddr;
}

// FIXME? Maybe this could be a TableGen attribute on some registers and
// this table could be generated automatically from RegInfo.
unsigned X86TargetLowering::getRegisterByName(const char* RegName, EVT VT,
                                              SelectionDAG &DAG) const {
  const TargetFrameLowering &TFI = *Subtarget.getFrameLowering();
  const MachineFunction &MF = DAG.getMachineFunction();

  unsigned Reg = StringSwitch<unsigned>(RegName)
                       .Case("esp", X86::ESP)
                       .Case("rsp", X86::RSP)
                       .Case("ebp", X86::EBP)
                       .Case("rbp", X86::RBP)
                       .Default(0);

  if (Reg == X86::EBP || Reg == X86::RBP) {
    if (!TFI.hasFP(MF))
      report_fatal_error("register " + StringRef(RegName) +
                         " is allocatable: function has no frame pointer");
#ifndef NDEBUG
    else {
      const X86RegisterInfo *RegInfo = Subtarget.getRegisterInfo();
      unsigned FrameReg =
          RegInfo->getPtrSizedFrameRegister(DAG.getMachineFunction());
      assert((FrameReg == X86::EBP || FrameReg == X86::RBP) &&
             "Invalid Frame Register!");
    }
#endif
  }

  if (Reg)
    return Reg;

  report_fatal_error("Invalid register name global variable");
}

SDValue X86TargetLowering::LowerFRAME_TO_ARGS_OFFSET(SDValue Op,
                                                     SelectionDAG &DAG) const {
  const X86RegisterInfo *RegInfo = Subtarget.getRegisterInfo();
  return DAG.getIntPtrConstant(2 * RegInfo->getSlotSize(), SDLoc(Op));
}

unsigned X86TargetLowering::getExceptionPointerRegister(
    const Constant *PersonalityFn) const {
  if (classifyEHPersonality(PersonalityFn) == EHPersonality::CoreCLR)
    return Subtarget.isTarget64BitLP64() ? X86::RDX : X86::EDX;

  return Subtarget.isTarget64BitLP64() ? X86::RAX : X86::EAX;
}

unsigned X86TargetLowering::getExceptionSelectorRegister(
    const Constant *PersonalityFn) const {
  // Funclet personalities don't use selectors (the runtime does the selection).
  assert(!isFuncletEHPersonality(classifyEHPersonality(PersonalityFn)));
  return Subtarget.isTarget64BitLP64() ? X86::RDX : X86::EDX;
}

bool X86TargetLowering::needsFixedCatchObjects() const {
  return Subtarget.isTargetWin64();
}

SDValue X86TargetLowering::LowerEH_RETURN(SDValue Op, SelectionDAG &DAG) const {
  SDValue Chain     = Op.getOperand(0);
  SDValue Offset    = Op.getOperand(1);
  SDValue Handler   = Op.getOperand(2);
  SDLoc dl      (Op);

  EVT PtrVT = getPointerTy(DAG.getDataLayout());
  const X86RegisterInfo *RegInfo = Subtarget.getRegisterInfo();
  unsigned FrameReg = RegInfo->getFrameRegister(DAG.getMachineFunction());
  assert(((FrameReg == X86::RBP && PtrVT == MVT::i64) ||
          (FrameReg == X86::EBP && PtrVT == MVT::i32)) &&
         "Invalid Frame Register!");
  SDValue Frame = DAG.getCopyFromReg(DAG.getEntryNode(), dl, FrameReg, PtrVT);
  unsigned StoreAddrReg = (PtrVT == MVT::i64) ? X86::RCX : X86::ECX;

  SDValue StoreAddr = DAG.getNode(ISD::ADD, dl, PtrVT, Frame,
                                 DAG.getIntPtrConstant(RegInfo->getSlotSize(),
                                                       dl));
  StoreAddr = DAG.getNode(ISD::ADD, dl, PtrVT, StoreAddr, Offset);
  Chain = DAG.getStore(Chain, dl, Handler, StoreAddr, MachinePointerInfo());
  Chain = DAG.getCopyToReg(Chain, dl, StoreAddrReg, StoreAddr);

  return DAG.getNode(X86ISD::EH_RETURN, dl, MVT::Other, Chain,
                     DAG.getRegister(StoreAddrReg, PtrVT));
}

SDValue X86TargetLowering::lowerEH_SJLJ_SETJMP(SDValue Op,
                                               SelectionDAG &DAG) const {
  SDLoc DL(Op);
  // If the subtarget is not 64bit, we may need the global base reg
  // after isel expand pseudo, i.e., after CGBR pass ran.
  // Therefore, ask for the GlobalBaseReg now, so that the pass
  // inserts the code for us in case we need it.
  // Otherwise, we will end up in a situation where we will
  // reference a virtual register that is not defined!
  if (!Subtarget.is64Bit()) {
    const X86InstrInfo *TII = Subtarget.getInstrInfo();
    (void)TII->getGlobalBaseReg(&DAG.getMachineFunction());
  }
  return DAG.getNode(X86ISD::EH_SJLJ_SETJMP, DL,
                     DAG.getVTList(MVT::i32, MVT::Other),
                     Op.getOperand(0), Op.getOperand(1));
}

SDValue X86TargetLowering::lowerEH_SJLJ_LONGJMP(SDValue Op,
                                                SelectionDAG &DAG) const {
  SDLoc DL(Op);
  return DAG.getNode(X86ISD::EH_SJLJ_LONGJMP, DL, MVT::Other,
                     Op.getOperand(0), Op.getOperand(1));
}

SDValue X86TargetLowering::lowerEH_SJLJ_SETUP_DISPATCH(SDValue Op,
                                                       SelectionDAG &DAG) const {
  SDLoc DL(Op);
  return DAG.getNode(X86ISD::EH_SJLJ_SETUP_DISPATCH, DL, MVT::Other,
                     Op.getOperand(0));
}

static SDValue LowerADJUST_TRAMPOLINE(SDValue Op, SelectionDAG &DAG) {
  return Op.getOperand(0);
}

SDValue X86TargetLowering::LowerINIT_TRAMPOLINE(SDValue Op,
                                                SelectionDAG &DAG) const {
  SDValue Root = Op.getOperand(0);
  SDValue Trmp = Op.getOperand(1); // trampoline
  SDValue FPtr = Op.getOperand(2); // nested function
  SDValue Nest = Op.getOperand(3); // 'nest' parameter value
  SDLoc dl (Op);

  const Value *TrmpAddr = cast<SrcValueSDNode>(Op.getOperand(4))->getValue();
  const TargetRegisterInfo *TRI = Subtarget.getRegisterInfo();

  if (Subtarget.is64Bit()) {
    SDValue OutChains[6];

    // Large code-model.
    const unsigned char JMP64r  = 0xFF; // 64-bit jmp through register opcode.
    const unsigned char MOV64ri = 0xB8; // X86::MOV64ri opcode.

    const unsigned char N86R10 = TRI->getEncodingValue(X86::R10) & 0x7;
    const unsigned char N86R11 = TRI->getEncodingValue(X86::R11) & 0x7;

    const unsigned char REX_WB = 0x40 | 0x08 | 0x01; // REX prefix

    // Load the pointer to the nested function into R11.
    unsigned OpCode = ((MOV64ri | N86R11) << 8) | REX_WB; // movabsq r11
    SDValue Addr = Trmp;
    OutChains[0] = DAG.getStore(Root, dl, DAG.getConstant(OpCode, dl, MVT::i16),
                                Addr, MachinePointerInfo(TrmpAddr));

    Addr = DAG.getNode(ISD::ADD, dl, MVT::i64, Trmp,
                       DAG.getConstant(2, dl, MVT::i64));
    OutChains[1] =
        DAG.getStore(Root, dl, FPtr, Addr, MachinePointerInfo(TrmpAddr, 2),
                     /* Alignment = */ 2);

    // Load the 'nest' parameter value into R10.
    // R10 is specified in X86CallingConv.td
    OpCode = ((MOV64ri | N86R10) << 8) | REX_WB; // movabsq r10
    Addr = DAG.getNode(ISD::ADD, dl, MVT::i64, Trmp,
                       DAG.getConstant(10, dl, MVT::i64));
    OutChains[2] = DAG.getStore(Root, dl, DAG.getConstant(OpCode, dl, MVT::i16),
                                Addr, MachinePointerInfo(TrmpAddr, 10));

    Addr = DAG.getNode(ISD::ADD, dl, MVT::i64, Trmp,
                       DAG.getConstant(12, dl, MVT::i64));
    OutChains[3] =
        DAG.getStore(Root, dl, Nest, Addr, MachinePointerInfo(TrmpAddr, 12),
                     /* Alignment = */ 2);

    // Jump to the nested function.
    OpCode = (JMP64r << 8) | REX_WB; // jmpq *...
    Addr = DAG.getNode(ISD::ADD, dl, MVT::i64, Trmp,
                       DAG.getConstant(20, dl, MVT::i64));
    OutChains[4] = DAG.getStore(Root, dl, DAG.getConstant(OpCode, dl, MVT::i16),
                                Addr, MachinePointerInfo(TrmpAddr, 20));

    unsigned char ModRM = N86R11 | (4 << 3) | (3 << 6); // ...r11
    Addr = DAG.getNode(ISD::ADD, dl, MVT::i64, Trmp,
                       DAG.getConstant(22, dl, MVT::i64));
    OutChains[5] = DAG.getStore(Root, dl, DAG.getConstant(ModRM, dl, MVT::i8),
                                Addr, MachinePointerInfo(TrmpAddr, 22));

    return DAG.getNode(ISD::TokenFactor, dl, MVT::Other, OutChains);
  } else {
    const Function *Func =
      cast<Function>(cast<SrcValueSDNode>(Op.getOperand(5))->getValue());
    CallingConv::ID CC = Func->getCallingConv();
    unsigned NestReg;

    switch (CC) {
    default:
      llvm_unreachable("Unsupported calling convention");
    case CallingConv::C:
    case CallingConv::X86_StdCall: {
      // Pass 'nest' parameter in ECX.
      // Must be kept in sync with X86CallingConv.td
      NestReg = X86::ECX;

      // Check that ECX wasn't needed by an 'inreg' parameter.
      FunctionType *FTy = Func->getFunctionType();
      const AttributeList &Attrs = Func->getAttributes();

      if (!Attrs.isEmpty() && !Func->isVarArg()) {
        unsigned InRegCount = 0;
        unsigned Idx = 1;

        for (FunctionType::param_iterator I = FTy->param_begin(),
             E = FTy->param_end(); I != E; ++I, ++Idx)
          if (Attrs.hasAttribute(Idx, Attribute::InReg)) {
            auto &DL = DAG.getDataLayout();
            // FIXME: should only count parameters that are lowered to integers.
            InRegCount += (DL.getTypeSizeInBits(*I) + 31) / 32;
          }

        if (InRegCount > 2) {
          report_fatal_error("Nest register in use - reduce number of inreg"
                             " parameters!");
        }
      }
      break;
    }
    case CallingConv::X86_FastCall:
    case CallingConv::X86_ThisCall:
    case CallingConv::Fast:
      // Pass 'nest' parameter in EAX.
      // Must be kept in sync with X86CallingConv.td
      NestReg = X86::EAX;
      break;
    }

    SDValue OutChains[4];
    SDValue Addr, Disp;

    Addr = DAG.getNode(ISD::ADD, dl, MVT::i32, Trmp,
                       DAG.getConstant(10, dl, MVT::i32));
    Disp = DAG.getNode(ISD::SUB, dl, MVT::i32, FPtr, Addr);

    // This is storing the opcode for MOV32ri.
    const unsigned char MOV32ri = 0xB8; // X86::MOV32ri's opcode byte.
    const unsigned char N86Reg = TRI->getEncodingValue(NestReg) & 0x7;
    OutChains[0] =
        DAG.getStore(Root, dl, DAG.getConstant(MOV32ri | N86Reg, dl, MVT::i8),
                     Trmp, MachinePointerInfo(TrmpAddr));

    Addr = DAG.getNode(ISD::ADD, dl, MVT::i32, Trmp,
                       DAG.getConstant(1, dl, MVT::i32));
    OutChains[1] =
        DAG.getStore(Root, dl, Nest, Addr, MachinePointerInfo(TrmpAddr, 1),
                     /* Alignment = */ 1);

    const unsigned char JMP = 0xE9; // jmp <32bit dst> opcode.
    Addr = DAG.getNode(ISD::ADD, dl, MVT::i32, Trmp,
                       DAG.getConstant(5, dl, MVT::i32));
    OutChains[2] = DAG.getStore(Root, dl, DAG.getConstant(JMP, dl, MVT::i8),
                                Addr, MachinePointerInfo(TrmpAddr, 5),
                                /* Alignment = */ 1);

    Addr = DAG.getNode(ISD::ADD, dl, MVT::i32, Trmp,
                       DAG.getConstant(6, dl, MVT::i32));
    OutChains[3] =
        DAG.getStore(Root, dl, Disp, Addr, MachinePointerInfo(TrmpAddr, 6),
                     /* Alignment = */ 1);

    return DAG.getNode(ISD::TokenFactor, dl, MVT::Other, OutChains);
  }
}

SDValue X86TargetLowering::LowerFLT_ROUNDS_(SDValue Op,
                                            SelectionDAG &DAG) const {
  /*
   The rounding mode is in bits 11:10 of FPSR, and has the following
   settings:
     00 Round to nearest
     01 Round to -inf
     10 Round to +inf
     11 Round to 0

  FLT_ROUNDS, on the other hand, expects the following:
    -1 Undefined
     0 Round to 0
     1 Round to nearest
     2 Round to +inf
     3 Round to -inf

  To perform the conversion, we do:
    (((((FPSR & 0x800) >> 11) | ((FPSR & 0x400) >> 9)) + 1) & 3)
  */

  MachineFunction &MF = DAG.getMachineFunction();
  const TargetFrameLowering &TFI = *Subtarget.getFrameLowering();
  unsigned StackAlignment = TFI.getStackAlignment();
  MVT VT = Op.getSimpleValueType();
  SDLoc DL(Op);

  // Save FP Control Word to stack slot
  int SSFI = MF.getFrameInfo().CreateStackObject(2, StackAlignment, false);
  SDValue StackSlot =
      DAG.getFrameIndex(SSFI, getPointerTy(DAG.getDataLayout()));

  MachineMemOperand *MMO =
      MF.getMachineMemOperand(MachinePointerInfo::getFixedStack(MF, SSFI),
                              MachineMemOperand::MOStore, 2, 2);

  SDValue Ops[] = { DAG.getEntryNode(), StackSlot };
  SDValue Chain = DAG.getMemIntrinsicNode(X86ISD::FNSTCW16m, DL,
                                          DAG.getVTList(MVT::Other),
                                          Ops, MVT::i16, MMO);

  // Load FP Control Word from stack slot
  SDValue CWD =
      DAG.getLoad(MVT::i16, DL, Chain, StackSlot, MachinePointerInfo());

  // Transform as necessary
  SDValue CWD1 =
    DAG.getNode(ISD::SRL, DL, MVT::i16,
                DAG.getNode(ISD::AND, DL, MVT::i16,
                            CWD, DAG.getConstant(0x800, DL, MVT::i16)),
                DAG.getConstant(11, DL, MVT::i8));
  SDValue CWD2 =
    DAG.getNode(ISD::SRL, DL, MVT::i16,
                DAG.getNode(ISD::AND, DL, MVT::i16,
                            CWD, DAG.getConstant(0x400, DL, MVT::i16)),
                DAG.getConstant(9, DL, MVT::i8));

  SDValue RetVal =
    DAG.getNode(ISD::AND, DL, MVT::i16,
                DAG.getNode(ISD::ADD, DL, MVT::i16,
                            DAG.getNode(ISD::OR, DL, MVT::i16, CWD1, CWD2),
                            DAG.getConstant(1, DL, MVT::i16)),
                DAG.getConstant(3, DL, MVT::i16));

  return DAG.getNode((VT.getSizeInBits() < 16 ?
                      ISD::TRUNCATE : ISD::ZERO_EXTEND), DL, VT, RetVal);
}

// Split an unary integer op into 2 half sized ops.
static SDValue LowerVectorIntUnary(SDValue Op, SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();
  unsigned NumElems = VT.getVectorNumElements();
  unsigned SizeInBits = VT.getSizeInBits();

  // Extract the Lo/Hi vectors
  SDLoc dl(Op);
  SDValue Src = Op.getOperand(0);
  SDValue Lo = extractSubVector(Src, 0, DAG, dl, SizeInBits / 2);
  SDValue Hi = extractSubVector(Src, NumElems / 2, DAG, dl, SizeInBits / 2);

  MVT EltVT = VT.getVectorElementType();
  MVT NewVT = MVT::getVectorVT(EltVT, NumElems / 2);
  return DAG.getNode(ISD::CONCAT_VECTORS, dl, VT,
                     DAG.getNode(Op.getOpcode(), dl, NewVT, Lo),
                     DAG.getNode(Op.getOpcode(), dl, NewVT, Hi));
}

// Decompose 256-bit ops into smaller 128-bit ops.
static SDValue Lower256IntUnary(SDValue Op, SelectionDAG &DAG) {
  assert(Op.getSimpleValueType().is256BitVector() &&
         Op.getSimpleValueType().isInteger() &&
         "Only handle AVX 256-bit vector integer operation");
  return LowerVectorIntUnary(Op, DAG);
}

// Decompose 512-bit ops into smaller 256-bit ops.
static SDValue Lower512IntUnary(SDValue Op, SelectionDAG &DAG) {
  assert(Op.getSimpleValueType().is512BitVector() &&
         Op.getSimpleValueType().isInteger() &&
         "Only handle AVX 512-bit vector integer operation");
  return LowerVectorIntUnary(Op, DAG);
}

/// \brief Lower a vector CTLZ using native supported vector CTLZ instruction.
//
// i8/i16 vector implemented using dword LZCNT vector instruction
// ( sub(trunc(lzcnt(zext32(x)))) ). In case zext32(x) is illegal,
// split the vector, perform operation on it's Lo a Hi part and
// concatenate the results.
static SDValue LowerVectorCTLZ_AVX512CDI(SDValue Op, SelectionDAG &DAG) {
  assert(Op.getOpcode() == ISD::CTLZ);
  SDLoc dl(Op);
  MVT VT = Op.getSimpleValueType();
  MVT EltVT = VT.getVectorElementType();
  unsigned NumElems = VT.getVectorNumElements();

  assert((EltVT == MVT::i8 || EltVT == MVT::i16) &&
          "Unsupported element type");

  // Split vector, it's Lo and Hi parts will be handled in next iteration.
  if (16 < NumElems)
    return LowerVectorIntUnary(Op, DAG);

  MVT NewVT = MVT::getVectorVT(MVT::i32, NumElems);
  assert((NewVT.is256BitVector() || NewVT.is512BitVector()) &&
          "Unsupported value type for operation");

  // Use native supported vector instruction vplzcntd.
  Op = DAG.getNode(ISD::ZERO_EXTEND, dl, NewVT, Op.getOperand(0));
  SDValue CtlzNode = DAG.getNode(ISD::CTLZ, dl, NewVT, Op);
  SDValue TruncNode = DAG.getNode(ISD::TRUNCATE, dl, VT, CtlzNode);
  SDValue Delta = DAG.getConstant(32 - EltVT.getSizeInBits(), dl, VT);

  return DAG.getNode(ISD::SUB, dl, VT, TruncNode, Delta);
}

// Lower CTLZ using a PSHUFB lookup table implementation.
static SDValue LowerVectorCTLZInRegLUT(SDValue Op, const SDLoc &DL,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();
  int NumElts = VT.getVectorNumElements();
  int NumBytes = NumElts * (VT.getScalarSizeInBits() / 8);
  MVT CurrVT = MVT::getVectorVT(MVT::i8, NumBytes);

  // Per-nibble leading zero PSHUFB lookup table.
  const int LUT[16] = {/* 0 */ 4, /* 1 */ 3, /* 2 */ 2, /* 3 */ 2,
                       /* 4 */ 1, /* 5 */ 1, /* 6 */ 1, /* 7 */ 1,
                       /* 8 */ 0, /* 9 */ 0, /* a */ 0, /* b */ 0,
                       /* c */ 0, /* d */ 0, /* e */ 0, /* f */ 0};

  SmallVector<SDValue, 64> LUTVec;
  for (int i = 0; i < NumBytes; ++i)
    LUTVec.push_back(DAG.getConstant(LUT[i % 16], DL, MVT::i8));
  SDValue InRegLUT = DAG.getBuildVector(CurrVT, DL, LUTVec);

  // Begin by bitcasting the input to byte vector, then split those bytes
  // into lo/hi nibbles and use the PSHUFB LUT to perform CLTZ on each of them.
  // If the hi input nibble is zero then we add both results together, otherwise
  // we just take the hi result (by masking the lo result to zero before the
  // add).
  SDValue Op0 = DAG.getBitcast(CurrVT, Op.getOperand(0));
  SDValue Zero = getZeroVector(CurrVT, Subtarget, DAG, DL);

  SDValue NibbleMask = DAG.getConstant(0xF, DL, CurrVT);
  SDValue NibbleShift = DAG.getConstant(0x4, DL, CurrVT);
  SDValue Lo = DAG.getNode(ISD::AND, DL, CurrVT, Op0, NibbleMask);
  SDValue Hi = DAG.getNode(ISD::SRL, DL, CurrVT, Op0, NibbleShift);
  SDValue HiZ = DAG.getSetCC(DL, CurrVT, Hi, Zero, ISD::SETEQ);

  Lo = DAG.getNode(X86ISD::PSHUFB, DL, CurrVT, InRegLUT, Lo);
  Hi = DAG.getNode(X86ISD::PSHUFB, DL, CurrVT, InRegLUT, Hi);
  Lo = DAG.getNode(ISD::AND, DL, CurrVT, Lo, HiZ);
  SDValue Res = DAG.getNode(ISD::ADD, DL, CurrVT, Lo, Hi);

  // Merge result back from vXi8 back to VT, working on the lo/hi halves
  // of the current vector width in the same way we did for the nibbles.
  // If the upper half of the input element is zero then add the halves'
  // leading zero counts together, otherwise just use the upper half's.
  // Double the width of the result until we are at target width.
  while (CurrVT != VT) {
    int CurrScalarSizeInBits = CurrVT.getScalarSizeInBits();
    int CurrNumElts = CurrVT.getVectorNumElements();
    MVT NextSVT = MVT::getIntegerVT(CurrScalarSizeInBits * 2);
    MVT NextVT = MVT::getVectorVT(NextSVT, CurrNumElts / 2);
    SDValue Shift = DAG.getConstant(CurrScalarSizeInBits, DL, NextVT);

    // Check if the upper half of the input element is zero.
    SDValue HiZ = DAG.getSetCC(DL, CurrVT, DAG.getBitcast(CurrVT, Op0),
                               DAG.getBitcast(CurrVT, Zero), ISD::SETEQ);
    HiZ = DAG.getBitcast(NextVT, HiZ);

    // Move the upper/lower halves to the lower bits as we'll be extending to
    // NextVT. Mask the lower result to zero if HiZ is true and add the results
    // together.
    SDValue ResNext = Res = DAG.getBitcast(NextVT, Res);
    SDValue R0 = DAG.getNode(ISD::SRL, DL, NextVT, ResNext, Shift);
    SDValue R1 = DAG.getNode(ISD::SRL, DL, NextVT, HiZ, Shift);
    R1 = DAG.getNode(ISD::AND, DL, NextVT, ResNext, R1);
    Res = DAG.getNode(ISD::ADD, DL, NextVT, R0, R1);
    CurrVT = NextVT;
  }

  return Res;
}

static SDValue LowerVectorCTLZ(SDValue Op, const SDLoc &DL,
                               const X86Subtarget &Subtarget,
                               SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();

  if (Subtarget.hasCDI())
    return LowerVectorCTLZ_AVX512CDI(Op, DAG);

  // Decompose 256-bit ops into smaller 128-bit ops.
  if (VT.is256BitVector() && !Subtarget.hasInt256())
    return Lower256IntUnary(Op, DAG);

  // Decompose 512-bit ops into smaller 256-bit ops.
  if (VT.is512BitVector() && !Subtarget.hasBWI())
    return Lower512IntUnary(Op, DAG);

  assert(Subtarget.hasSSSE3() && "Expected SSSE3 support for PSHUFB");
  return LowerVectorCTLZInRegLUT(Op, DL, Subtarget, DAG);
}

static SDValue LowerCTLZ(SDValue Op, const X86Subtarget &Subtarget,
                         SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();
  MVT OpVT = VT;
  unsigned NumBits = VT.getSizeInBits();
  SDLoc dl(Op);
  unsigned Opc = Op.getOpcode();

  if (VT.isVector())
    return LowerVectorCTLZ(Op, dl, Subtarget, DAG);

  Op = Op.getOperand(0);
  if (VT == MVT::i8) {
    // Zero extend to i32 since there is not an i8 bsr.
    OpVT = MVT::i32;
    Op = DAG.getNode(ISD::ZERO_EXTEND, dl, OpVT, Op);
  }

  // Issue a bsr (scan bits in reverse) which also sets EFLAGS.
  SDVTList VTs = DAG.getVTList(OpVT, MVT::i32);
  Op = DAG.getNode(X86ISD::BSR, dl, VTs, Op);

  if (Opc == ISD::CTLZ) {
    // If src is zero (i.e. bsr sets ZF), returns NumBits.
    SDValue Ops[] = {
      Op,
      DAG.getConstant(NumBits + NumBits - 1, dl, OpVT),
      DAG.getConstant(X86::COND_E, dl, MVT::i8),
      Op.getValue(1)
    };
    Op = DAG.getNode(X86ISD::CMOV, dl, OpVT, Ops);
  }

  // Finally xor with NumBits-1.
  Op = DAG.getNode(ISD::XOR, dl, OpVT, Op,
                   DAG.getConstant(NumBits - 1, dl, OpVT));

  if (VT == MVT::i8)
    Op = DAG.getNode(ISD::TRUNCATE, dl, MVT::i8, Op);
  return Op;
}

static SDValue LowerCTTZ(SDValue Op, SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();
  unsigned NumBits = VT.getScalarSizeInBits();
  SDLoc dl(Op);

  if (VT.isVector()) {
    SDValue N0 = Op.getOperand(0);
    SDValue Zero = DAG.getConstant(0, dl, VT);

    // lsb(x) = (x & -x)
    SDValue LSB = DAG.getNode(ISD::AND, dl, VT, N0,
                              DAG.getNode(ISD::SUB, dl, VT, Zero, N0));

    // cttz_undef(x) = (width - 1) - ctlz(lsb)
    if (Op.getOpcode() == ISD::CTTZ_ZERO_UNDEF) {
      SDValue WidthMinusOne = DAG.getConstant(NumBits - 1, dl, VT);
      return DAG.getNode(ISD::SUB, dl, VT, WidthMinusOne,
                         DAG.getNode(ISD::CTLZ, dl, VT, LSB));
    }

    // cttz(x) = ctpop(lsb - 1)
    SDValue One = DAG.getConstant(1, dl, VT);
    return DAG.getNode(ISD::CTPOP, dl, VT,
                       DAG.getNode(ISD::SUB, dl, VT, LSB, One));
  }

  assert(Op.getOpcode() == ISD::CTTZ &&
         "Only scalar CTTZ requires custom lowering");

  // Issue a bsf (scan bits forward) which also sets EFLAGS.
  SDVTList VTs = DAG.getVTList(VT, MVT::i32);
  Op = DAG.getNode(X86ISD::BSF, dl, VTs, Op.getOperand(0));

  // If src is zero (i.e. bsf sets ZF), returns NumBits.
  SDValue Ops[] = {
    Op,
    DAG.getConstant(NumBits, dl, VT),
    DAG.getConstant(X86::COND_E, dl, MVT::i8),
    Op.getValue(1)
  };
  return DAG.getNode(X86ISD::CMOV, dl, VT, Ops);
}

/// Break a 256-bit integer operation into two new 128-bit ones and then
/// concatenate the result back.
static SDValue Lower256IntArith(SDValue Op, SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();

  assert(VT.is256BitVector() && VT.isInteger() &&
         "Unsupported value type for operation");

  unsigned NumElems = VT.getVectorNumElements();
  SDLoc dl(Op);

  // Extract the LHS vectors
  SDValue LHS = Op.getOperand(0);
  SDValue LHS1 = extract128BitVector(LHS, 0, DAG, dl);
  SDValue LHS2 = extract128BitVector(LHS, NumElems / 2, DAG, dl);

  // Extract the RHS vectors
  SDValue RHS = Op.getOperand(1);
  SDValue RHS1 = extract128BitVector(RHS, 0, DAG, dl);
  SDValue RHS2 = extract128BitVector(RHS, NumElems / 2, DAG, dl);

  MVT EltVT = VT.getVectorElementType();
  MVT NewVT = MVT::getVectorVT(EltVT, NumElems/2);

  return DAG.getNode(ISD::CONCAT_VECTORS, dl, VT,
                     DAG.getNode(Op.getOpcode(), dl, NewVT, LHS1, RHS1),
                     DAG.getNode(Op.getOpcode(), dl, NewVT, LHS2, RHS2));
}

/// Break a 512-bit integer operation into two new 256-bit ones and then
/// concatenate the result back.
static SDValue Lower512IntArith(SDValue Op, SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();

  assert(VT.is512BitVector() && VT.isInteger() &&
         "Unsupported value type for operation");

  unsigned NumElems = VT.getVectorNumElements();
  SDLoc dl(Op);

  // Extract the LHS vectors
  SDValue LHS = Op.getOperand(0);
  SDValue LHS1 = extract256BitVector(LHS, 0, DAG, dl);
  SDValue LHS2 = extract256BitVector(LHS, NumElems / 2, DAG, dl);

  // Extract the RHS vectors
  SDValue RHS = Op.getOperand(1);
  SDValue RHS1 = extract256BitVector(RHS, 0, DAG, dl);
  SDValue RHS2 = extract256BitVector(RHS, NumElems / 2, DAG, dl);

  MVT EltVT = VT.getVectorElementType();
  MVT NewVT = MVT::getVectorVT(EltVT, NumElems/2);

  return DAG.getNode(ISD::CONCAT_VECTORS, dl, VT,
                     DAG.getNode(Op.getOpcode(), dl, NewVT, LHS1, RHS1),
                     DAG.getNode(Op.getOpcode(), dl, NewVT, LHS2, RHS2));
}

static SDValue LowerADD_SUB(SDValue Op, SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();
  if (VT.getScalarType() == MVT::i1)
    return DAG.getNode(ISD::XOR, SDLoc(Op), VT,
                       Op.getOperand(0), Op.getOperand(1));
  assert(Op.getSimpleValueType().is256BitVector() &&
         Op.getSimpleValueType().isInteger() &&
         "Only handle AVX 256-bit vector integer operation");
  return Lower256IntArith(Op, DAG);
}

static SDValue LowerABS(SDValue Op, SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();
  if (VT == MVT::i16 || VT == MVT::i32 || VT == MVT::i64) {
    // Since X86 does not have CMOV for 8-bit integer, we don't convert
    // 8-bit integer abs to NEG and CMOV.
    SDLoc DL(Op);
    SDValue N0 = Op.getOperand(0);
    SDValue Neg = DAG.getNode(X86ISD::SUB, DL, DAG.getVTList(VT, MVT::i32),
                              DAG.getConstant(0, DL, VT), N0);
    SDValue Ops[] = {N0, Neg, DAG.getConstant(X86::COND_GE, DL, MVT::i8),
                     SDValue(Neg.getNode(), 1)};
    return DAG.getNode(X86ISD::CMOV, DL, VT, Ops);
  }

  assert(Op.getSimpleValueType().is256BitVector() &&
         Op.getSimpleValueType().isInteger() &&
         "Only handle AVX 256-bit vector integer operation");
  return Lower256IntUnary(Op, DAG);
}

static SDValue LowerMINMAX(SDValue Op, SelectionDAG &DAG) {
  assert(Op.getSimpleValueType().is256BitVector() &&
         Op.getSimpleValueType().isInteger() &&
         "Only handle AVX 256-bit vector integer operation");
  return Lower256IntArith(Op, DAG);
}

static SDValue LowerMUL(SDValue Op, const X86Subtarget &Subtarget,
                        SelectionDAG &DAG) {
  SDLoc dl(Op);
  MVT VT = Op.getSimpleValueType();

  if (VT.getScalarType() == MVT::i1)
    return DAG.getNode(ISD::AND, dl, VT, Op.getOperand(0), Op.getOperand(1));

  // Decompose 256-bit ops into smaller 128-bit ops.
  if (VT.is256BitVector() && !Subtarget.hasInt256())
    return Lower256IntArith(Op, DAG);

  SDValue A = Op.getOperand(0);
  SDValue B = Op.getOperand(1);

  // Lower v16i8/v32i8/v64i8 mul as sign-extension to v8i16/v16i16/v32i16
  // vector pairs, multiply and truncate.
  if (VT == MVT::v16i8 || VT == MVT::v32i8 || VT == MVT::v64i8) {
    if (Subtarget.hasInt256()) {
      // For 512-bit vectors, split into 256-bit vectors to allow the
      // sign-extension to occur.
      if (VT == MVT::v64i8)
        return Lower512IntArith(Op, DAG);

      // For 256-bit vectors, split into 128-bit vectors to allow the
      // sign-extension to occur. We don't need this on AVX512BW as we can
      // safely sign-extend to v32i16.
      if (VT == MVT::v32i8 && !Subtarget.hasBWI())
        return Lower256IntArith(Op, DAG);

      MVT ExVT = MVT::getVectorVT(MVT::i16, VT.getVectorNumElements());
      return DAG.getNode(
          ISD::TRUNCATE, dl, VT,
          DAG.getNode(ISD::MUL, dl, ExVT,
                      DAG.getNode(ISD::SIGN_EXTEND, dl, ExVT, A),
                      DAG.getNode(ISD::SIGN_EXTEND, dl, ExVT, B)));
    }

    assert(VT == MVT::v16i8 &&
           "Pre-AVX2 support only supports v16i8 multiplication");
    MVT ExVT = MVT::v8i16;

    // Extract the lo parts and sign extend to i16
    SDValue ALo, BLo;
    if (Subtarget.hasSSE41()) {
      ALo = DAG.getSignExtendVectorInReg(A, dl, ExVT);
      BLo = DAG.getSignExtendVectorInReg(B, dl, ExVT);
    } else {
      const int ShufMask[] = {-1, 0, -1, 1, -1, 2, -1, 3,
                              -1, 4, -1, 5, -1, 6, -1, 7};
      ALo = DAG.getVectorShuffle(VT, dl, A, A, ShufMask);
      BLo = DAG.getVectorShuffle(VT, dl, B, B, ShufMask);
      ALo = DAG.getBitcast(ExVT, ALo);
      BLo = DAG.getBitcast(ExVT, BLo);
      ALo = DAG.getNode(ISD::SRA, dl, ExVT, ALo, DAG.getConstant(8, dl, ExVT));
      BLo = DAG.getNode(ISD::SRA, dl, ExVT, BLo, DAG.getConstant(8, dl, ExVT));
    }

    // Extract the hi parts and sign extend to i16
    SDValue AHi, BHi;
    if (Subtarget.hasSSE41()) {
      const int ShufMask[] = {8,  9,  10, 11, 12, 13, 14, 15,
                              -1, -1, -1, -1, -1, -1, -1, -1};
      AHi = DAG.getVectorShuffle(VT, dl, A, A, ShufMask);
      BHi = DAG.getVectorShuffle(VT, dl, B, B, ShufMask);
      AHi = DAG.getSignExtendVectorInReg(AHi, dl, ExVT);
      BHi = DAG.getSignExtendVectorInReg(BHi, dl, ExVT);
    } else {
      const int ShufMask[] = {-1, 8,  -1, 9,  -1, 10, -1, 11,
                              -1, 12, -1, 13, -1, 14, -1, 15};
      AHi = DAG.getVectorShuffle(VT, dl, A, A, ShufMask);
      BHi = DAG.getVectorShuffle(VT, dl, B, B, ShufMask);
      AHi = DAG.getBitcast(ExVT, AHi);
      BHi = DAG.getBitcast(ExVT, BHi);
      AHi = DAG.getNode(ISD::SRA, dl, ExVT, AHi, DAG.getConstant(8, dl, ExVT));
      BHi = DAG.getNode(ISD::SRA, dl, ExVT, BHi, DAG.getConstant(8, dl, ExVT));
    }

    // Multiply, mask the lower 8bits of the lo/hi results and pack
    SDValue RLo = DAG.getNode(ISD::MUL, dl, ExVT, ALo, BLo);
    SDValue RHi = DAG.getNode(ISD::MUL, dl, ExVT, AHi, BHi);
    RLo = DAG.getNode(ISD::AND, dl, ExVT, RLo, DAG.getConstant(255, dl, ExVT));
    RHi = DAG.getNode(ISD::AND, dl, ExVT, RHi, DAG.getConstant(255, dl, ExVT));
    return DAG.getNode(X86ISD::PACKUS, dl, VT, RLo, RHi);
  }

  // Lower v4i32 mul as 2x shuffle, 2x pmuludq, 2x shuffle.
  if (VT == MVT::v4i32) {
    assert(Subtarget.hasSSE2() && !Subtarget.hasSSE41() &&
           "Should not custom lower when pmuldq is available!");

    // Extract the odd parts.
    static const int UnpackMask[] = { 1, -1, 3, -1 };
    SDValue Aodds = DAG.getVectorShuffle(VT, dl, A, A, UnpackMask);
    SDValue Bodds = DAG.getVectorShuffle(VT, dl, B, B, UnpackMask);

    // Multiply the even parts.
    SDValue Evens = DAG.getNode(X86ISD::PMULUDQ, dl, MVT::v2i64, A, B);
    // Now multiply odd parts.
    SDValue Odds = DAG.getNode(X86ISD::PMULUDQ, dl, MVT::v2i64, Aodds, Bodds);

    Evens = DAG.getBitcast(VT, Evens);
    Odds = DAG.getBitcast(VT, Odds);

    // Merge the two vectors back together with a shuffle. This expands into 2
    // shuffles.
    static const int ShufMask[] = { 0, 4, 2, 6 };
    return DAG.getVectorShuffle(VT, dl, Evens, Odds, ShufMask);
  }

  assert((VT == MVT::v2i64 || VT == MVT::v4i64 || VT == MVT::v8i64) &&
         "Only know how to lower V2I64/V4I64/V8I64 multiply");

  // 32-bit vector types used for MULDQ/MULUDQ.
  MVT MulVT = MVT::getVectorVT(MVT::i32, VT.getSizeInBits() / 32);

  // MULDQ returns the 64-bit result of the signed multiplication of the lower
  // 32-bits. We can lower with this if the sign bits stretch that far.
  if (Subtarget.hasSSE41() && DAG.ComputeNumSignBits(A) > 32 &&
      DAG.ComputeNumSignBits(B) > 32) {
    return DAG.getNode(X86ISD::PMULDQ, dl, VT, DAG.getBitcast(MulVT, A),
                       DAG.getBitcast(MulVT, B));
  }

  //  Ahi = psrlqi(a, 32);
  //  Bhi = psrlqi(b, 32);
  //
  //  AloBlo = pmuludq(a, b);
  //  AloBhi = pmuludq(a, Bhi);
  //  AhiBlo = pmuludq(Ahi, b);
  //
  //  Hi = psllqi(AloBhi + AhiBlo, 32);
  //  return AloBlo + Hi;
  APInt LowerBitsMask = APInt::getLowBitsSet(64, 32);
  bool ALoIsZero = DAG.MaskedValueIsZero(A, LowerBitsMask);
  bool BLoIsZero = DAG.MaskedValueIsZero(B, LowerBitsMask);

  APInt UpperBitsMask = APInt::getHighBitsSet(64, 32);
  bool AHiIsZero = DAG.MaskedValueIsZero(A, UpperBitsMask);
  bool BHiIsZero = DAG.MaskedValueIsZero(B, UpperBitsMask);

  // Bit cast to 32-bit vectors for MULUDQ.
  SDValue Alo = DAG.getBitcast(MulVT, A);
  SDValue Blo = DAG.getBitcast(MulVT, B);

  SDValue Zero = getZeroVector(VT, Subtarget, DAG, dl);

  // Only multiply lo/hi halves that aren't known to be zero.
  SDValue AloBlo = Zero;
  if (!ALoIsZero && !BLoIsZero)
    AloBlo = DAG.getNode(X86ISD::PMULUDQ, dl, VT, Alo, Blo);

  SDValue AloBhi = Zero;
  if (!ALoIsZero && !BHiIsZero) {
    SDValue Bhi = getTargetVShiftByConstNode(X86ISD::VSRLI, dl, VT, B, 32, DAG);
    Bhi = DAG.getBitcast(MulVT, Bhi);
    AloBhi = DAG.getNode(X86ISD::PMULUDQ, dl, VT, Alo, Bhi);
  }

  SDValue AhiBlo = Zero;
  if (!AHiIsZero && !BLoIsZero) {
    SDValue Ahi = getTargetVShiftByConstNode(X86ISD::VSRLI, dl, VT, A, 32, DAG);
    Ahi = DAG.getBitcast(MulVT, Ahi);
    AhiBlo = DAG.getNode(X86ISD::PMULUDQ, dl, VT, Ahi, Blo);
  }

  SDValue Hi = DAG.getNode(ISD::ADD, dl, VT, AloBhi, AhiBlo);
  Hi = getTargetVShiftByConstNode(X86ISD::VSHLI, dl, VT, Hi, 32, DAG);

  return DAG.getNode(ISD::ADD, dl, VT, AloBlo, Hi);
}

static SDValue LowerMULH(SDValue Op, const X86Subtarget &Subtarget,
                         SelectionDAG &DAG) {
  SDLoc dl(Op);
  MVT VT = Op.getSimpleValueType();

  // Decompose 256-bit ops into smaller 128-bit ops.
  if (VT.is256BitVector() && !Subtarget.hasInt256())
    return Lower256IntArith(Op, DAG);

  // Only i8 vectors should need custom lowering after this.
  assert((VT == MVT::v16i8 || (VT == MVT::v32i8 && Subtarget.hasInt256()) ||
         (VT == MVT::v64i8 && Subtarget.hasBWI())) &&
         "Unsupported vector type");

  // Lower v16i8/v32i8 as extension to v8i16/v16i16 vector pairs, multiply,
  // logical shift down the upper half and pack back to i8.
  SDValue A = Op.getOperand(0);
  SDValue B = Op.getOperand(1);

  // With SSE41 we can use sign/zero extend, but for pre-SSE41 we unpack
  // and then ashr/lshr the upper bits down to the lower bits before multiply.
  unsigned Opcode = Op.getOpcode();
  unsigned ExShift = (ISD::MULHU == Opcode ? ISD::SRL : ISD::SRA);
  unsigned ExAVX = (ISD::MULHU == Opcode ? ISD::ZERO_EXTEND : ISD::SIGN_EXTEND);

  // For 512-bit vectors, split into 256-bit vectors to allow the
  // sign-extension to occur.
  if (VT == MVT::v64i8)
    return Lower512IntArith(Op, DAG);

  // AVX2 implementations - extend xmm subvectors to ymm.
  if (Subtarget.hasInt256()) {
    unsigned NumElems = VT.getVectorNumElements();
    SDValue Lo = DAG.getIntPtrConstant(0, dl);
    SDValue Hi = DAG.getIntPtrConstant(NumElems / 2, dl);

    if (VT == MVT::v32i8) {
      if (Subtarget.hasBWI()) {
        SDValue ExA = DAG.getNode(ExAVX, dl, MVT::v32i16, A);
        SDValue ExB = DAG.getNode(ExAVX, dl, MVT::v32i16, B);
        SDValue Mul = DAG.getNode(ISD::MUL, dl, MVT::v32i16, ExA, ExB);
        Mul = DAG.getNode(ISD::SRL, dl, MVT::v32i16, Mul,
                          DAG.getConstant(8, dl, MVT::v32i16));
        return DAG.getNode(ISD::TRUNCATE, dl, VT, Mul);
      }
      SDValue ALo = extract128BitVector(A, 0, DAG, dl);
      SDValue BLo = extract128BitVector(B, 0, DAG, dl);
      SDValue AHi = extract128BitVector(A, NumElems / 2, DAG, dl);
      SDValue BHi = extract128BitVector(B, NumElems / 2, DAG, dl);
      ALo = DAG.getNode(ExAVX, dl, MVT::v16i16, ALo);
      BLo = DAG.getNode(ExAVX, dl, MVT::v16i16, BLo);
      AHi = DAG.getNode(ExAVX, dl, MVT::v16i16, AHi);
      BHi = DAG.getNode(ExAVX, dl, MVT::v16i16, BHi);
      Lo = DAG.getNode(ISD::SRL, dl, MVT::v16i16,
                       DAG.getNode(ISD::MUL, dl, MVT::v16i16, ALo, BLo),
                       DAG.getConstant(8, dl, MVT::v16i16));
      Hi = DAG.getNode(ISD::SRL, dl, MVT::v16i16,
                       DAG.getNode(ISD::MUL, dl, MVT::v16i16, AHi, BHi),
                       DAG.getConstant(8, dl, MVT::v16i16));
      // The ymm variant of PACKUS treats the 128-bit lanes separately, so before
      // using PACKUS we need to permute the inputs to the correct lo/hi xmm lane.
      const int LoMask[] = {0,  1,  2,  3,  4,  5,  6,  7,
                            16, 17, 18, 19, 20, 21, 22, 23};
      const int HiMask[] = {8,  9,  10, 11, 12, 13, 14, 15,
                            24, 25, 26, 27, 28, 29, 30, 31};
      return DAG.getNode(X86ISD::PACKUS, dl, VT,
                         DAG.getVectorShuffle(MVT::v16i16, dl, Lo, Hi, LoMask),
                         DAG.getVectorShuffle(MVT::v16i16, dl, Lo, Hi, HiMask));
    }

    SDValue ExA = DAG.getNode(ExAVX, dl, MVT::v16i16, A);
    SDValue ExB = DAG.getNode(ExAVX, dl, MVT::v16i16, B);
    SDValue Mul = DAG.getNode(ISD::MUL, dl, MVT::v16i16, ExA, ExB);
    Mul = DAG.getNode(ISD::SRL, dl, MVT::v16i16, Mul,
                      DAG.getConstant(8, dl, MVT::v16i16));
    // If we have BWI we can use truncate instruction.
    if (Subtarget.hasBWI())
      return DAG.getNode(ISD::TRUNCATE, dl, VT, Mul);
    Lo = DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl, MVT::v8i16, Mul, Lo);
    Hi = DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl, MVT::v8i16, Mul, Hi);
    return DAG.getNode(X86ISD::PACKUS, dl, VT, Lo, Hi);
  }

  assert(VT == MVT::v16i8 &&
         "Pre-AVX2 support only supports v16i8 multiplication");
  MVT ExVT = MVT::v8i16;
  unsigned ExSSE41 = (ISD::MULHU == Opcode ? X86ISD::VZEXT : X86ISD::VSEXT);

  // Extract the lo parts and zero/sign extend to i16.
  SDValue ALo, BLo;
  if (Subtarget.hasSSE41()) {
    ALo = getExtendInVec(ExSSE41, dl, ExVT, A, DAG);
    BLo = getExtendInVec(ExSSE41, dl, ExVT, B, DAG);
  } else {
    const int ShufMask[] = {-1, 0, -1, 1, -1, 2, -1, 3,
                            -1, 4, -1, 5, -1, 6, -1, 7};
    ALo = DAG.getVectorShuffle(VT, dl, A, A, ShufMask);
    BLo = DAG.getVectorShuffle(VT, dl, B, B, ShufMask);
    ALo = DAG.getBitcast(ExVT, ALo);
    BLo = DAG.getBitcast(ExVT, BLo);
    ALo = DAG.getNode(ExShift, dl, ExVT, ALo, DAG.getConstant(8, dl, ExVT));
    BLo = DAG.getNode(ExShift, dl, ExVT, BLo, DAG.getConstant(8, dl, ExVT));
  }

  // Extract the hi parts and zero/sign extend to i16.
  SDValue AHi, BHi;
  if (Subtarget.hasSSE41()) {
    const int ShufMask[] = {8,  9,  10, 11, 12, 13, 14, 15,
                            -1, -1, -1, -1, -1, -1, -1, -1};
    AHi = DAG.getVectorShuffle(VT, dl, A, A, ShufMask);
    BHi = DAG.getVectorShuffle(VT, dl, B, B, ShufMask);
    AHi = getExtendInVec(ExSSE41, dl, ExVT, AHi, DAG);
    BHi = getExtendInVec(ExSSE41, dl, ExVT, BHi, DAG);
  } else {
    const int ShufMask[] = {-1, 8,  -1, 9,  -1, 10, -1, 11,
                            -1, 12, -1, 13, -1, 14, -1, 15};
    AHi = DAG.getVectorShuffle(VT, dl, A, A, ShufMask);
    BHi = DAG.getVectorShuffle(VT, dl, B, B, ShufMask);
    AHi = DAG.getBitcast(ExVT, AHi);
    BHi = DAG.getBitcast(ExVT, BHi);
    AHi = DAG.getNode(ExShift, dl, ExVT, AHi, DAG.getConstant(8, dl, ExVT));
    BHi = DAG.getNode(ExShift, dl, ExVT, BHi, DAG.getConstant(8, dl, ExVT));
  }

  // Multiply, lshr the upper 8bits to the lower 8bits of the lo/hi results and
  // pack back to v16i8.
  SDValue RLo = DAG.getNode(ISD::MUL, dl, ExVT, ALo, BLo);
  SDValue RHi = DAG.getNode(ISD::MUL, dl, ExVT, AHi, BHi);
  RLo = DAG.getNode(ISD::SRL, dl, ExVT, RLo, DAG.getConstant(8, dl, ExVT));
  RHi = DAG.getNode(ISD::SRL, dl, ExVT, RHi, DAG.getConstant(8, dl, ExVT));
  return DAG.getNode(X86ISD::PACKUS, dl, VT, RLo, RHi);
}

SDValue X86TargetLowering::LowerWin64_i128OP(SDValue Op, SelectionDAG &DAG) const {
  assert(Subtarget.isTargetWin64() && "Unexpected target");
  EVT VT = Op.getValueType();
  assert(VT.isInteger() && VT.getSizeInBits() == 128 &&
         "Unexpected return type for lowering");

  RTLIB::Libcall LC;
  bool isSigned;
  switch (Op->getOpcode()) {
  default: llvm_unreachable("Unexpected request for libcall!");
  case ISD::SDIV:      isSigned = true;  LC = RTLIB::SDIV_I128;    break;
  case ISD::UDIV:      isSigned = false; LC = RTLIB::UDIV_I128;    break;
  case ISD::SREM:      isSigned = true;  LC = RTLIB::SREM_I128;    break;
  case ISD::UREM:      isSigned = false; LC = RTLIB::UREM_I128;    break;
  case ISD::SDIVREM:   isSigned = true;  LC = RTLIB::SDIVREM_I128; break;
  case ISD::UDIVREM:   isSigned = false; LC = RTLIB::UDIVREM_I128; break;
  }

  SDLoc dl(Op);
  SDValue InChain = DAG.getEntryNode();

  TargetLowering::ArgListTy Args;
  TargetLowering::ArgListEntry Entry;
  for (unsigned i = 0, e = Op->getNumOperands(); i != e; ++i) {
    EVT ArgVT = Op->getOperand(i).getValueType();
    assert(ArgVT.isInteger() && ArgVT.getSizeInBits() == 128 &&
           "Unexpected argument type for lowering");
    SDValue StackPtr = DAG.CreateStackTemporary(ArgVT, 16);
    Entry.Node = StackPtr;
    InChain = DAG.getStore(InChain, dl, Op->getOperand(i), StackPtr,
                           MachinePointerInfo(), /* Alignment = */ 16);
    Type *ArgTy = ArgVT.getTypeForEVT(*DAG.getContext());
    Entry.Ty = PointerType::get(ArgTy,0);
    Entry.IsSExt = false;
    Entry.IsZExt = false;
    Args.push_back(Entry);
  }

  SDValue Callee = DAG.getExternalSymbol(getLibcallName(LC),
                                         getPointerTy(DAG.getDataLayout()));

  TargetLowering::CallLoweringInfo CLI(DAG);
  CLI.setDebugLoc(dl)
      .setChain(InChain)
      .setLibCallee(
          getLibcallCallingConv(LC),
          static_cast<EVT>(MVT::v2i64).getTypeForEVT(*DAG.getContext()), Callee,
          std::move(Args))
      .setInRegister()
      .setSExtResult(isSigned)
      .setZExtResult(!isSigned);

  std::pair<SDValue, SDValue> CallInfo = LowerCallTo(CLI);
  return DAG.getBitcast(VT, CallInfo.first);
}

static SDValue LowerMUL_LOHI(SDValue Op, const X86Subtarget &Subtarget,
                             SelectionDAG &DAG) {
  SDValue Op0 = Op.getOperand(0), Op1 = Op.getOperand(1);
  MVT VT = Op0.getSimpleValueType();
  SDLoc dl(Op);

  // Decompose 256-bit ops into smaller 128-bit ops.
  if (VT.is256BitVector() && !Subtarget.hasInt256()) {
    unsigned Opcode = Op.getOpcode();
    unsigned NumElems = VT.getVectorNumElements();
    MVT HalfVT = MVT::getVectorVT(VT.getScalarType(), NumElems / 2);
    SDValue Lo0 = extract128BitVector(Op0, 0, DAG, dl);
    SDValue Lo1 = extract128BitVector(Op1, 0, DAG, dl);
    SDValue Hi0 = extract128BitVector(Op0, NumElems / 2, DAG, dl);
    SDValue Hi1 = extract128BitVector(Op1, NumElems / 2, DAG, dl);
    SDValue Lo = DAG.getNode(Opcode, dl, DAG.getVTList(HalfVT, HalfVT), Lo0, Lo1);
    SDValue Hi = DAG.getNode(Opcode, dl, DAG.getVTList(HalfVT, HalfVT), Hi0, Hi1);
    SDValue Ops[] = {
      DAG.getNode(ISD::CONCAT_VECTORS, dl, VT, Lo.getValue(0), Hi.getValue(0)),
      DAG.getNode(ISD::CONCAT_VECTORS, dl, VT, Lo.getValue(1), Hi.getValue(1))
    };
    return DAG.getMergeValues(Ops, dl);
  }

  assert((VT == MVT::v4i32 && Subtarget.hasSSE2()) ||
         (VT == MVT::v8i32 && Subtarget.hasInt256()) ||
         (VT == MVT::v16i32 && Subtarget.hasAVX512()));

  int NumElts = VT.getVectorNumElements();

  // PMULxD operations multiply each even value (starting at 0) of LHS with
  // the related value of RHS and produce a widen result.
  // E.g., PMULUDQ <4 x i32> <a|b|c|d>, <4 x i32> <e|f|g|h>
  // => <2 x i64> <ae|cg>
  //
  // In other word, to have all the results, we need to perform two PMULxD:
  // 1. one with the even values.
  // 2. one with the odd values.
  // To achieve #2, with need to place the odd values at an even position.
  //
  // Place the odd value at an even position (basically, shift all values 1
  // step to the left):
  const int Mask[] = {1, -1, 3, -1, 5, -1, 7, -1, 9, -1, 11, -1, 13, -1, 15, -1};
  // <a|b|c|d> => <b|undef|d|undef>
  SDValue Odd0 = DAG.getVectorShuffle(VT, dl, Op0, Op0,
                                      makeArrayRef(&Mask[0], NumElts));
  // <e|f|g|h> => <f|undef|h|undef>
  SDValue Odd1 = DAG.getVectorShuffle(VT, dl, Op1, Op1,
                                      makeArrayRef(&Mask[0], NumElts));

  // Emit two multiplies, one for the lower 2 ints and one for the higher 2
  // ints.
  MVT MulVT = MVT::getVectorVT(MVT::i64, NumElts / 2);
  bool IsSigned = Op->getOpcode() == ISD::SMUL_LOHI;
  unsigned Opcode =
      (!IsSigned || !Subtarget.hasSSE41()) ? X86ISD::PMULUDQ : X86ISD::PMULDQ;
  // PMULUDQ <4 x i32> <a|b|c|d>, <4 x i32> <e|f|g|h>
  // => <2 x i64> <ae|cg>
  SDValue Mul1 = DAG.getBitcast(VT, DAG.getNode(Opcode, dl, MulVT, Op0, Op1));
  // PMULUDQ <4 x i32> <b|undef|d|undef>, <4 x i32> <f|undef|h|undef>
  // => <2 x i64> <bf|dh>
  SDValue Mul2 = DAG.getBitcast(VT, DAG.getNode(Opcode, dl, MulVT, Odd0, Odd1));

  // Shuffle it back into the right order.
  SmallVector<int, 16> HighMask(NumElts);
  SmallVector<int, 16> LowMask(NumElts);
  for (int i = 0; i != NumElts; ++i) {
    HighMask[i] = (i / 2) * 2 + ((i % 2) * NumElts) + 1;
    LowMask[i] = (i / 2) * 2 + ((i % 2) * NumElts);
  }

  SDValue Highs = DAG.getVectorShuffle(VT, dl, Mul1, Mul2, HighMask);
  SDValue Lows = DAG.getVectorShuffle(VT, dl, Mul1, Mul2, LowMask);

  // If we have a signed multiply but no PMULDQ fix up the high parts of a
  // unsigned multiply.
  if (IsSigned && !Subtarget.hasSSE41()) {
    SDValue ShAmt = DAG.getConstant(
        31, dl,
        DAG.getTargetLoweringInfo().getShiftAmountTy(VT, DAG.getDataLayout()));
    SDValue T1 = DAG.getNode(ISD::AND, dl, VT,
                             DAG.getNode(ISD::SRA, dl, VT, Op0, ShAmt), Op1);
    SDValue T2 = DAG.getNode(ISD::AND, dl, VT,
                             DAG.getNode(ISD::SRA, dl, VT, Op1, ShAmt), Op0);

    SDValue Fixup = DAG.getNode(ISD::ADD, dl, VT, T1, T2);
    Highs = DAG.getNode(ISD::SUB, dl, VT, Highs, Fixup);
  }

  // The first result of MUL_LOHI is actually the low value, followed by the
  // high value.
  SDValue Ops[] = {Lows, Highs};
  return DAG.getMergeValues(Ops, dl);
}

// Return true if the required (according to Opcode) shift-imm form is natively
// supported by the Subtarget
static bool SupportedVectorShiftWithImm(MVT VT, const X86Subtarget &Subtarget,
                                        unsigned Opcode) {
  if (VT.getScalarSizeInBits() < 16)
    return false;

  if (VT.is512BitVector() && Subtarget.hasAVX512() &&
      (VT.getScalarSizeInBits() > 16 || Subtarget.hasBWI()))
    return true;

  bool LShift = (VT.is128BitVector() && Subtarget.hasSSE2()) ||
                (VT.is256BitVector() && Subtarget.hasInt256());

  bool AShift = LShift && (Subtarget.hasAVX512() ||
                           (VT != MVT::v2i64 && VT != MVT::v4i64));
  return (Opcode == ISD::SRA) ? AShift : LShift;
}

// The shift amount is a variable, but it is the same for all vector lanes.
// These instructions are defined together with shift-immediate.
static
bool SupportedVectorShiftWithBaseAmnt(MVT VT, const X86Subtarget &Subtarget,
                                      unsigned Opcode) {
  return SupportedVectorShiftWithImm(VT, Subtarget, Opcode);
}

// Return true if the required (according to Opcode) variable-shift form is
// natively supported by the Subtarget
static bool SupportedVectorVarShift(MVT VT, const X86Subtarget &Subtarget,
                                    unsigned Opcode) {

  if (!Subtarget.hasInt256() || VT.getScalarSizeInBits() < 16)
    return false;

  // vXi16 supported only on AVX-512, BWI
  if (VT.getScalarSizeInBits() == 16 && !Subtarget.hasBWI())
    return false;

  if (Subtarget.hasAVX512())
    return true;

  bool LShift = VT.is128BitVector() || VT.is256BitVector();
  bool AShift = LShift &&  VT != MVT::v2i64 && VT != MVT::v4i64;
  return (Opcode == ISD::SRA) ? AShift : LShift;
}

static SDValue LowerScalarImmediateShift(SDValue Op, SelectionDAG &DAG,
                                         const X86Subtarget &Subtarget) {
  MVT VT = Op.getSimpleValueType();
  SDLoc dl(Op);
  SDValue R = Op.getOperand(0);
  SDValue Amt = Op.getOperand(1);

  unsigned X86Opc = (Op.getOpcode() == ISD::SHL) ? X86ISD::VSHLI :
    (Op.getOpcode() == ISD::SRL) ? X86ISD::VSRLI : X86ISD::VSRAI;

  auto ArithmeticShiftRight64 = [&](uint64_t ShiftAmt) {
    assert((VT == MVT::v2i64 || VT == MVT::v4i64) && "Unexpected SRA type");
    MVT ExVT = MVT::getVectorVT(MVT::i32, VT.getVectorNumElements() * 2);
    SDValue Ex = DAG.getBitcast(ExVT, R);

    // ashr(R, 63) === cmp_slt(R, 0)
    if (ShiftAmt == 63 && Subtarget.hasSSE42()) {
      assert((VT != MVT::v4i64 || Subtarget.hasInt256()) &&
             "Unsupported PCMPGT op");
      return DAG.getNode(X86ISD::PCMPGT, dl, VT,
                         getZeroVector(VT, Subtarget, DAG, dl), R);
    }

    if (ShiftAmt >= 32) {
      // Splat sign to upper i32 dst, and SRA upper i32 src to lower i32.
      SDValue Upper =
          getTargetVShiftByConstNode(X86ISD::VSRAI, dl, ExVT, Ex, 31, DAG);
      SDValue Lower = getTargetVShiftByConstNode(X86ISD::VSRAI, dl, ExVT, Ex,
                                                 ShiftAmt - 32, DAG);
      if (VT == MVT::v2i64)
        Ex = DAG.getVectorShuffle(ExVT, dl, Upper, Lower, {5, 1, 7, 3});
      if (VT == MVT::v4i64)
        Ex = DAG.getVectorShuffle(ExVT, dl, Upper, Lower,
                                  {9, 1, 11, 3, 13, 5, 15, 7});
    } else {
      // SRA upper i32, SHL whole i64 and select lower i32.
      SDValue Upper = getTargetVShiftByConstNode(X86ISD::VSRAI, dl, ExVT, Ex,
                                                 ShiftAmt, DAG);
      SDValue Lower =
          getTargetVShiftByConstNode(X86ISD::VSRLI, dl, VT, R, ShiftAmt, DAG);
      Lower = DAG.getBitcast(ExVT, Lower);
      if (VT == MVT::v2i64)
        Ex = DAG.getVectorShuffle(ExVT, dl, Upper, Lower, {4, 1, 6, 3});
      if (VT == MVT::v4i64)
        Ex = DAG.getVectorShuffle(ExVT, dl, Upper, Lower,
                                  {8, 1, 10, 3, 12, 5, 14, 7});
    }
    return DAG.getBitcast(VT, Ex);
  };

  // Optimize shl/srl/sra with constant shift amount.
  if (auto *BVAmt = dyn_cast<BuildVectorSDNode>(Amt)) {
    if (auto *ShiftConst = BVAmt->getConstantSplatNode()) {
      uint64_t ShiftAmt = ShiftConst->getZExtValue();

      if (SupportedVectorShiftWithImm(VT, Subtarget, Op.getOpcode()))
        return getTargetVShiftByConstNode(X86Opc, dl, VT, R, ShiftAmt, DAG);

      // i64 SRA needs to be performed as partial shifts.
      if (((!Subtarget.hasXOP() && VT == MVT::v2i64) ||
           (Subtarget.hasInt256() && VT == MVT::v4i64)) &&
          Op.getOpcode() == ISD::SRA)
        return ArithmeticShiftRight64(ShiftAmt);

      if (VT == MVT::v16i8 ||
          (Subtarget.hasInt256() && VT == MVT::v32i8) ||
          VT == MVT::v64i8) {
        unsigned NumElts = VT.getVectorNumElements();
        MVT ShiftVT = MVT::getVectorVT(MVT::i16, NumElts / 2);

        // Simple i8 add case
        if (Op.getOpcode() == ISD::SHL && ShiftAmt == 1)
          return DAG.getNode(ISD::ADD, dl, VT, R, R);

        // ashr(R, 7)  === cmp_slt(R, 0)
        if (Op.getOpcode() == ISD::SRA && ShiftAmt == 7) {
          SDValue Zeros = getZeroVector(VT, Subtarget, DAG, dl);
          if (VT.is512BitVector()) {
            assert(VT == MVT::v64i8 && "Unexpected element type!");
            SDValue CMP = DAG.getNode(X86ISD::PCMPGTM, dl, MVT::v64i1, Zeros, R);
            return DAG.getNode(ISD::SIGN_EXTEND, dl, VT, CMP);
          }
          return DAG.getNode(X86ISD::PCMPGT, dl, VT, Zeros, R);
        }

        // XOP can shift v16i8 directly instead of as shift v8i16 + mask.
        if (VT == MVT::v16i8 && Subtarget.hasXOP())
          return SDValue();

        if (Op.getOpcode() == ISD::SHL) {
          // Make a large shift.
          SDValue SHL = getTargetVShiftByConstNode(X86ISD::VSHLI, dl, ShiftVT,
                                                   R, ShiftAmt, DAG);
          SHL = DAG.getBitcast(VT, SHL);
          // Zero out the rightmost bits.
          return DAG.getNode(ISD::AND, dl, VT, SHL,
                             DAG.getConstant(uint8_t(-1U << ShiftAmt), dl, VT));
        }
        if (Op.getOpcode() == ISD::SRL) {
          // Make a large shift.
          SDValue SRL = getTargetVShiftByConstNode(X86ISD::VSRLI, dl, ShiftVT,
                                                   R, ShiftAmt, DAG);
          SRL = DAG.getBitcast(VT, SRL);
          // Zero out the leftmost bits.
          return DAG.getNode(ISD::AND, dl, VT, SRL,
                             DAG.getConstant(uint8_t(-1U) >> ShiftAmt, dl, VT));
        }
        if (Op.getOpcode() == ISD::SRA) {
          // ashr(R, Amt) === sub(xor(lshr(R, Amt), Mask), Mask)
          SDValue Res = DAG.getNode(ISD::SRL, dl, VT, R, Amt);

          SDValue Mask = DAG.getConstant(128 >> ShiftAmt, dl, VT);
          Res = DAG.getNode(ISD::XOR, dl, VT, Res, Mask);
          Res = DAG.getNode(ISD::SUB, dl, VT, Res, Mask);
          return Res;
        }
        llvm_unreachable("Unknown shift opcode.");
      }
    }
  }

  // Check cases (mainly 32-bit) where i64 is expanded into high and low parts.
  // TODO: Replace constant extraction with getTargetConstantBitsFromNode.
  if (!Subtarget.hasXOP() &&
      (VT == MVT::v2i64 || (Subtarget.hasInt256() && VT == MVT::v4i64) ||
       (Subtarget.hasAVX512() && VT == MVT::v8i64))) {

    // AVX1 targets maybe extracting a 128-bit vector from a 256-bit constant.
    unsigned SubVectorScale = 1;
    if (Amt.getOpcode() == ISD::EXTRACT_SUBVECTOR) {
      SubVectorScale =
          Amt.getOperand(0).getValueSizeInBits() / Amt.getValueSizeInBits();
      Amt = Amt.getOperand(0);
    }

    // Peek through any splat that was introduced for i64 shift vectorization.
    int SplatIndex = -1;
    if (ShuffleVectorSDNode *SVN = dyn_cast<ShuffleVectorSDNode>(Amt.getNode()))
      if (SVN->isSplat()) {
        SplatIndex = SVN->getSplatIndex();
        Amt = Amt.getOperand(0);
        assert(SplatIndex < (int)VT.getVectorNumElements() &&
               "Splat shuffle referencing second operand");
      }

    if (Amt.getOpcode() != ISD::BITCAST ||
        Amt.getOperand(0).getOpcode() != ISD::BUILD_VECTOR)
      return SDValue();

    Amt = Amt.getOperand(0);
    unsigned Ratio = Amt.getSimpleValueType().getVectorNumElements() /
                     (SubVectorScale * VT.getVectorNumElements());
    unsigned RatioInLog2 = Log2_32_Ceil(Ratio);
    uint64_t ShiftAmt = 0;
    unsigned BaseOp = (SplatIndex < 0 ? 0 : SplatIndex * Ratio);
    for (unsigned i = 0; i != Ratio; ++i) {
      ConstantSDNode *C = dyn_cast<ConstantSDNode>(Amt.getOperand(i + BaseOp));
      if (!C)
        return SDValue();
      // 6 == Log2(64)
      ShiftAmt |= C->getZExtValue() << (i * (1 << (6 - RatioInLog2)));
    }

    // Check remaining shift amounts (if not a splat).
    if (SplatIndex < 0) {
      for (unsigned i = Ratio; i != Amt.getNumOperands(); i += Ratio) {
        uint64_t ShAmt = 0;
        for (unsigned j = 0; j != Ratio; ++j) {
          ConstantSDNode *C = dyn_cast<ConstantSDNode>(Amt.getOperand(i + j));
          if (!C)
            return SDValue();
          // 6 == Log2(64)
          ShAmt |= C->getZExtValue() << (j * (1 << (6 - RatioInLog2)));
        }
        if (ShAmt != ShiftAmt)
          return SDValue();
      }
    }

    if (SupportedVectorShiftWithImm(VT, Subtarget, Op.getOpcode()))
      return getTargetVShiftByConstNode(X86Opc, dl, VT, R, ShiftAmt, DAG);

    if (Op.getOpcode() == ISD::SRA)
      return ArithmeticShiftRight64(ShiftAmt);
  }

  return SDValue();
}

static SDValue LowerScalarVariableShift(SDValue Op, SelectionDAG &DAG,
                                        const X86Subtarget &Subtarget) {
  MVT VT = Op.getSimpleValueType();
  SDLoc dl(Op);
  SDValue R = Op.getOperand(0);
  SDValue Amt = Op.getOperand(1);

  unsigned X86OpcI = (Op.getOpcode() == ISD::SHL) ? X86ISD::VSHLI :
    (Op.getOpcode() == ISD::SRL) ? X86ISD::VSRLI : X86ISD::VSRAI;

  unsigned X86OpcV = (Op.getOpcode() == ISD::SHL) ? X86ISD::VSHL :
    (Op.getOpcode() == ISD::SRL) ? X86ISD::VSRL : X86ISD::VSRA;

  if (SupportedVectorShiftWithBaseAmnt(VT, Subtarget, Op.getOpcode())) {
    SDValue BaseShAmt;
    MVT EltVT = VT.getVectorElementType();

    if (BuildVectorSDNode *BV = dyn_cast<BuildVectorSDNode>(Amt)) {
      // Check if this build_vector node is doing a splat.
      // If so, then set BaseShAmt equal to the splat value.
      BaseShAmt = BV->getSplatValue();
      if (BaseShAmt && BaseShAmt.isUndef())
        BaseShAmt = SDValue();
    } else {
      if (Amt.getOpcode() == ISD::EXTRACT_SUBVECTOR)
        Amt = Amt.getOperand(0);

      ShuffleVectorSDNode *SVN = dyn_cast<ShuffleVectorSDNode>(Amt);
      if (SVN && SVN->isSplat()) {
        unsigned SplatIdx = (unsigned)SVN->getSplatIndex();
        SDValue InVec = Amt.getOperand(0);
        if (InVec.getOpcode() == ISD::BUILD_VECTOR) {
          assert((SplatIdx < InVec.getSimpleValueType().getVectorNumElements()) &&
                 "Unexpected shuffle index found!");
          BaseShAmt = InVec.getOperand(SplatIdx);
        } else if (InVec.getOpcode() == ISD::INSERT_VECTOR_ELT) {
           if (ConstantSDNode *C =
               dyn_cast<ConstantSDNode>(InVec.getOperand(2))) {
             if (C->getZExtValue() == SplatIdx)
               BaseShAmt = InVec.getOperand(1);
           }
        }

        if (!BaseShAmt)
          // Avoid introducing an extract element from a shuffle.
          BaseShAmt = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, EltVT, InVec,
                                  DAG.getIntPtrConstant(SplatIdx, dl));
      }
    }

    if (BaseShAmt.getNode()) {
      assert(EltVT.bitsLE(MVT::i64) && "Unexpected element type!");
      if (EltVT != MVT::i64 && EltVT.bitsGT(MVT::i32))
        BaseShAmt = DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::i64, BaseShAmt);
      else if (EltVT.bitsLT(MVT::i32))
        BaseShAmt = DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::i32, BaseShAmt);

      return getTargetVShiftNode(X86OpcI, dl, VT, R, BaseShAmt, Subtarget, DAG);
    }
  }

  // Check cases (mainly 32-bit) where i64 is expanded into high and low parts.
  if (VT == MVT::v2i64  && Amt.getOpcode() == ISD::BITCAST &&
      Amt.getOperand(0).getOpcode() == ISD::BUILD_VECTOR) {
    Amt = Amt.getOperand(0);
    unsigned Ratio = Amt.getSimpleValueType().getVectorNumElements() /
                     VT.getVectorNumElements();
    std::vector<SDValue> Vals(Ratio);
    for (unsigned i = 0; i != Ratio; ++i)
      Vals[i] = Amt.getOperand(i);
    for (unsigned i = Ratio; i != Amt.getNumOperands(); i += Ratio) {
      for (unsigned j = 0; j != Ratio; ++j)
        if (Vals[j] != Amt.getOperand(i + j))
          return SDValue();
    }

    if (SupportedVectorShiftWithBaseAmnt(VT, Subtarget, Op.getOpcode()))
      return DAG.getNode(X86OpcV, dl, VT, R, Op.getOperand(1));
  }
  return SDValue();
}

static SDValue LowerShift(SDValue Op, const X86Subtarget &Subtarget,
                          SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();
  SDLoc dl(Op);
  SDValue R = Op.getOperand(0);
  SDValue Amt = Op.getOperand(1);
  bool ConstantAmt = ISD::isBuildVectorOfConstantSDNodes(Amt.getNode());

  assert(VT.isVector() && "Custom lowering only for vector shifts!");
  assert(Subtarget.hasSSE2() && "Only custom lower when we have SSE2!");

  if (SDValue V = LowerScalarImmediateShift(Op, DAG, Subtarget))
    return V;

  if (SDValue V = LowerScalarVariableShift(Op, DAG, Subtarget))
    return V;

  if (SupportedVectorVarShift(VT, Subtarget, Op.getOpcode()))
    return Op;

  // XOP has 128-bit variable logical/arithmetic shifts.
  // +ve/-ve Amt = shift left/right.
  if (Subtarget.hasXOP() &&
      (VT == MVT::v2i64 || VT == MVT::v4i32 ||
       VT == MVT::v8i16 || VT == MVT::v16i8)) {
    if (Op.getOpcode() == ISD::SRL || Op.getOpcode() == ISD::SRA) {
      SDValue Zero = getZeroVector(VT, Subtarget, DAG, dl);
      Amt = DAG.getNode(ISD::SUB, dl, VT, Zero, Amt);
    }
    if (Op.getOpcode() == ISD::SHL || Op.getOpcode() == ISD::SRL)
      return DAG.getNode(X86ISD::VPSHL, dl, VT, R, Amt);
    if (Op.getOpcode() == ISD::SRA)
      return DAG.getNode(X86ISD::VPSHA, dl, VT, R, Amt);
  }

  // 2i64 vector logical shifts can efficiently avoid scalarization - do the
  // shifts per-lane and then shuffle the partial results back together.
  if (VT == MVT::v2i64 && Op.getOpcode() != ISD::SRA) {
    // Splat the shift amounts so the scalar shifts above will catch it.
    SDValue Amt0 = DAG.getVectorShuffle(VT, dl, Amt, Amt, {0, 0});
    SDValue Amt1 = DAG.getVectorShuffle(VT, dl, Amt, Amt, {1, 1});
    SDValue R0 = DAG.getNode(Op->getOpcode(), dl, VT, R, Amt0);
    SDValue R1 = DAG.getNode(Op->getOpcode(), dl, VT, R, Amt1);
    return DAG.getVectorShuffle(VT, dl, R0, R1, {0, 3});
  }

  // i64 vector arithmetic shift can be emulated with the transform:
  // M = lshr(SIGN_MASK, Amt)
  // ashr(R, Amt) === sub(xor(lshr(R, Amt), M), M)
  if ((VT == MVT::v2i64 || (VT == MVT::v4i64 && Subtarget.hasInt256())) &&
      Op.getOpcode() == ISD::SRA) {
    SDValue S = DAG.getConstant(APInt::getSignMask(64), dl, VT);
    SDValue M = DAG.getNode(ISD::SRL, dl, VT, S, Amt);
    R = DAG.getNode(ISD::SRL, dl, VT, R, Amt);
    R = DAG.getNode(ISD::XOR, dl, VT, R, M);
    R = DAG.getNode(ISD::SUB, dl, VT, R, M);
    return R;
  }

  // If possible, lower this packed shift into a vector multiply instead of
  // expanding it into a sequence of scalar shifts.
  // Do this only if the vector shift count is a constant build_vector.
  if (ConstantAmt && Op.getOpcode() == ISD::SHL &&
      (VT == MVT::v8i16 || VT == MVT::v4i32 ||
       (Subtarget.hasInt256() && VT == MVT::v16i16))) {
    SmallVector<SDValue, 8> Elts;
    MVT SVT = VT.getVectorElementType();
    unsigned SVTBits = SVT.getSizeInBits();
    APInt One(SVTBits, 1);
    unsigned NumElems = VT.getVectorNumElements();

    for (unsigned i=0; i !=NumElems; ++i) {
      SDValue Op = Amt->getOperand(i);
      if (Op->isUndef()) {
        Elts.push_back(Op);
        continue;
      }

      ConstantSDNode *ND = cast<ConstantSDNode>(Op);
      APInt C(SVTBits, ND->getAPIntValue().getZExtValue());
      uint64_t ShAmt = C.getZExtValue();
      if (ShAmt >= SVTBits) {
        Elts.push_back(DAG.getUNDEF(SVT));
        continue;
      }
      Elts.push_back(DAG.getConstant(One.shl(ShAmt), dl, SVT));
    }
    SDValue BV = DAG.getBuildVector(VT, dl, Elts);
    return DAG.getNode(ISD::MUL, dl, VT, R, BV);
  }

  // Lower SHL with variable shift amount.
  if (VT == MVT::v4i32 && Op->getOpcode() == ISD::SHL) {
    Op = DAG.getNode(ISD::SHL, dl, VT, Amt, DAG.getConstant(23, dl, VT));

    Op = DAG.getNode(ISD::ADD, dl, VT, Op,
                     DAG.getConstant(0x3f800000U, dl, VT));
    Op = DAG.getBitcast(MVT::v4f32, Op);
    Op = DAG.getNode(ISD::FP_TO_SINT, dl, VT, Op);
    return DAG.getNode(ISD::MUL, dl, VT, Op, R);
  }

  // If possible, lower this shift as a sequence of two shifts by
  // constant plus a MOVSS/MOVSD/PBLEND instead of scalarizing it.
  // Example:
  //   (v4i32 (srl A, (build_vector < X, Y, Y, Y>)))
  //
  // Could be rewritten as:
  //   (v4i32 (MOVSS (srl A, <Y,Y,Y,Y>), (srl A, <X,X,X,X>)))
  //
  // The advantage is that the two shifts from the example would be
  // lowered as X86ISD::VSRLI nodes. This would be cheaper than scalarizing
  // the vector shift into four scalar shifts plus four pairs of vector
  // insert/extract.
  if (ConstantAmt && (VT == MVT::v8i16 || VT == MVT::v4i32)) {
    bool UseMOVSD = false;
    bool CanBeSimplified;
    // The splat value for the first packed shift (the 'X' from the example).
    SDValue Amt1 = Amt->getOperand(0);
    // The splat value for the second packed shift (the 'Y' from the example).
    SDValue Amt2 = (VT == MVT::v4i32) ? Amt->getOperand(1) : Amt->getOperand(2);

    // See if it is possible to replace this node with a sequence of
    // two shifts followed by a MOVSS/MOVSD/PBLEND.
    if (VT == MVT::v4i32) {
      // Check if it is legal to use a MOVSS.
      CanBeSimplified = Amt2 == Amt->getOperand(2) &&
                        Amt2 == Amt->getOperand(3);
      if (!CanBeSimplified) {
        // Otherwise, check if we can still simplify this node using a MOVSD.
        CanBeSimplified = Amt1 == Amt->getOperand(1) &&
                          Amt->getOperand(2) == Amt->getOperand(3);
        UseMOVSD = true;
        Amt2 = Amt->getOperand(2);
      }
    } else {
      // Do similar checks for the case where the machine value type
      // is MVT::v8i16.
      CanBeSimplified = Amt1 == Amt->getOperand(1);
      for (unsigned i=3; i != 8 && CanBeSimplified; ++i)
        CanBeSimplified = Amt2 == Amt->getOperand(i);

      if (!CanBeSimplified) {
        UseMOVSD = true;
        CanBeSimplified = true;
        Amt2 = Amt->getOperand(4);
        for (unsigned i=0; i != 4 && CanBeSimplified; ++i)
          CanBeSimplified = Amt1 == Amt->getOperand(i);
        for (unsigned j=4; j != 8 && CanBeSimplified; ++j)
          CanBeSimplified = Amt2 == Amt->getOperand(j);
      }
    }

    if (CanBeSimplified && isa<ConstantSDNode>(Amt1) &&
        isa<ConstantSDNode>(Amt2)) {
      // Replace this node with two shifts followed by a MOVSS/MOVSD/PBLEND.
      SDValue Splat1 =
          DAG.getConstant(cast<ConstantSDNode>(Amt1)->getAPIntValue(), dl, VT);
      SDValue Shift1 = DAG.getNode(Op->getOpcode(), dl, VT, R, Splat1);
      SDValue Splat2 =
          DAG.getConstant(cast<ConstantSDNode>(Amt2)->getAPIntValue(), dl, VT);
      SDValue Shift2 = DAG.getNode(Op->getOpcode(), dl, VT, R, Splat2);
      SDValue BitCast1 = DAG.getBitcast(MVT::v4i32, Shift1);
      SDValue BitCast2 = DAG.getBitcast(MVT::v4i32, Shift2);
      if (UseMOVSD)
        return DAG.getBitcast(VT, DAG.getVectorShuffle(MVT::v4i32, dl, BitCast1,
                                                       BitCast2, {0, 1, 6, 7}));
      return DAG.getBitcast(VT, DAG.getVectorShuffle(MVT::v4i32, dl, BitCast1,
                                                     BitCast2, {0, 5, 6, 7}));
    }
  }

  // v4i32 Non Uniform Shifts.
  // If the shift amount is constant we can shift each lane using the SSE2
  // immediate shifts, else we need to zero-extend each lane to the lower i64
  // and shift using the SSE2 variable shifts.
  // The separate results can then be blended together.
  if (VT == MVT::v4i32) {
    unsigned Opc = Op.getOpcode();
    SDValue Amt0, Amt1, Amt2, Amt3;
    if (ConstantAmt) {
      Amt0 = DAG.getVectorShuffle(VT, dl, Amt, DAG.getUNDEF(VT), {0, 0, 0, 0});
      Amt1 = DAG.getVectorShuffle(VT, dl, Amt, DAG.getUNDEF(VT), {1, 1, 1, 1});
      Amt2 = DAG.getVectorShuffle(VT, dl, Amt, DAG.getUNDEF(VT), {2, 2, 2, 2});
      Amt3 = DAG.getVectorShuffle(VT, dl, Amt, DAG.getUNDEF(VT), {3, 3, 3, 3});
    } else {
      // ISD::SHL is handled above but we include it here for completeness.
      switch (Opc) {
      default:
        llvm_unreachable("Unknown target vector shift node");
      case ISD::SHL:
        Opc = X86ISD::VSHL;
        break;
      case ISD::SRL:
        Opc = X86ISD::VSRL;
        break;
      case ISD::SRA:
        Opc = X86ISD::VSRA;
        break;
      }
      // The SSE2 shifts use the lower i64 as the same shift amount for
      // all lanes and the upper i64 is ignored. These shuffle masks
      // optimally zero-extend each lanes on SSE2/SSE41/AVX targets.
      SDValue Z = getZeroVector(VT, Subtarget, DAG, dl);
      Amt0 = DAG.getVectorShuffle(VT, dl, Amt, Z, {0, 4, -1, -1});
      Amt1 = DAG.getVectorShuffle(VT, dl, Amt, Z, {1, 5, -1, -1});
      Amt2 = DAG.getVectorShuffle(VT, dl, Amt, Z, {2, 6, -1, -1});
      Amt3 = DAG.getVectorShuffle(VT, dl, Amt, Z, {3, 7, -1, -1});
    }

    SDValue R0 = DAG.getNode(Opc, dl, VT, R, Amt0);
    SDValue R1 = DAG.getNode(Opc, dl, VT, R, Amt1);
    SDValue R2 = DAG.getNode(Opc, dl, VT, R, Amt2);
    SDValue R3 = DAG.getNode(Opc, dl, VT, R, Amt3);
    SDValue R02 = DAG.getVectorShuffle(VT, dl, R0, R2, {0, -1, 6, -1});
    SDValue R13 = DAG.getVectorShuffle(VT, dl, R1, R3, {-1, 1, -1, 7});
    return DAG.getVectorShuffle(VT, dl, R02, R13, {0, 5, 2, 7});
  }

  // It's worth extending once and using the vXi16/vXi32 shifts for smaller
  // types, but without AVX512 the extra overheads to get from vXi8 to vXi32
  // make the existing SSE solution better.
  if ((Subtarget.hasInt256() && VT == MVT::v8i16) ||
      (Subtarget.hasAVX512() && VT == MVT::v16i16) ||
      (Subtarget.hasAVX512() && VT == MVT::v16i8) ||
      (Subtarget.hasBWI() && VT == MVT::v32i8)) {
    MVT EvtSVT = (VT == MVT::v32i8 ? MVT::i16 : MVT::i32);
    MVT ExtVT = MVT::getVectorVT(EvtSVT, VT.getVectorNumElements());
    unsigned ExtOpc =
        Op.getOpcode() == ISD::SRA ? ISD::SIGN_EXTEND : ISD::ZERO_EXTEND;
    R = DAG.getNode(ExtOpc, dl, ExtVT, R);
    Amt = DAG.getNode(ISD::ANY_EXTEND, dl, ExtVT, Amt);
    return DAG.getNode(ISD::TRUNCATE, dl, VT,
                       DAG.getNode(Op.getOpcode(), dl, ExtVT, R, Amt));
  }

  if (VT == MVT::v16i8 ||
      (VT == MVT::v32i8 && Subtarget.hasInt256() && !Subtarget.hasXOP()) ||
      (VT == MVT::v64i8 && Subtarget.hasBWI())) {
    MVT ExtVT = MVT::getVectorVT(MVT::i16, VT.getVectorNumElements() / 2);
    unsigned ShiftOpcode = Op->getOpcode();

    auto SignBitSelect = [&](MVT SelVT, SDValue Sel, SDValue V0, SDValue V1) {
      if (VT.is512BitVector()) {
        // On AVX512BW targets we make use of the fact that VSELECT lowers
        // to a masked blend which selects bytes based just on the sign bit
        // extracted to a mask.
        MVT MaskVT = MVT::getVectorVT(MVT::i1, VT.getVectorNumElements());
        V0 = DAG.getBitcast(VT, V0);
        V1 = DAG.getBitcast(VT, V1);
        Sel = DAG.getBitcast(VT, Sel);
        Sel = DAG.getNode(X86ISD::CVT2MASK, dl, MaskVT, Sel);
        return DAG.getBitcast(SelVT, DAG.getSelect(dl, VT, Sel, V0, V1));
      } else if (Subtarget.hasSSE41()) {
        // On SSE41 targets we make use of the fact that VSELECT lowers
        // to PBLENDVB which selects bytes based just on the sign bit.
        V0 = DAG.getBitcast(VT, V0);
        V1 = DAG.getBitcast(VT, V1);
        Sel = DAG.getBitcast(VT, Sel);
        return DAG.getBitcast(SelVT, DAG.getSelect(dl, VT, Sel, V0, V1));
      }
      // On pre-SSE41 targets we test for the sign bit by comparing to
      // zero - a negative value will set all bits of the lanes to true
      // and VSELECT uses that in its OR(AND(V0,C),AND(V1,~C)) lowering.
      SDValue Z = getZeroVector(SelVT, Subtarget, DAG, dl);
      SDValue C = DAG.getNode(X86ISD::PCMPGT, dl, SelVT, Z, Sel);
      return DAG.getSelect(dl, SelVT, C, V0, V1);
    };

    // Turn 'a' into a mask suitable for VSELECT: a = a << 5;
    // We can safely do this using i16 shifts as we're only interested in
    // the 3 lower bits of each byte.
    Amt = DAG.getBitcast(ExtVT, Amt);
    Amt = DAG.getNode(ISD::SHL, dl, ExtVT, Amt, DAG.getConstant(5, dl, ExtVT));
    Amt = DAG.getBitcast(VT, Amt);

    if (Op->getOpcode() == ISD::SHL || Op->getOpcode() == ISD::SRL) {
      // r = VSELECT(r, shift(r, 4), a);
      SDValue M =
          DAG.getNode(ShiftOpcode, dl, VT, R, DAG.getConstant(4, dl, VT));
      R = SignBitSelect(VT, Amt, M, R);

      // a += a
      Amt = DAG.getNode(ISD::ADD, dl, VT, Amt, Amt);

      // r = VSELECT(r, shift(r, 2), a);
      M = DAG.getNode(ShiftOpcode, dl, VT, R, DAG.getConstant(2, dl, VT));
      R = SignBitSelect(VT, Amt, M, R);

      // a += a
      Amt = DAG.getNode(ISD::ADD, dl, VT, Amt, Amt);

      // return VSELECT(r, shift(r, 1), a);
      M = DAG.getNode(ShiftOpcode, dl, VT, R, DAG.getConstant(1, dl, VT));
      R = SignBitSelect(VT, Amt, M, R);
      return R;
    }

    if (Op->getOpcode() == ISD::SRA) {
      // For SRA we need to unpack each byte to the higher byte of a i16 vector
      // so we can correctly sign extend. We don't care what happens to the
      // lower byte.
      SDValue ALo = DAG.getNode(X86ISD::UNPCKL, dl, VT, DAG.getUNDEF(VT), Amt);
      SDValue AHi = DAG.getNode(X86ISD::UNPCKH, dl, VT, DAG.getUNDEF(VT), Amt);
      SDValue RLo = DAG.getNode(X86ISD::UNPCKL, dl, VT, DAG.getUNDEF(VT), R);
      SDValue RHi = DAG.getNode(X86ISD::UNPCKH, dl, VT, DAG.getUNDEF(VT), R);
      ALo = DAG.getBitcast(ExtVT, ALo);
      AHi = DAG.getBitcast(ExtVT, AHi);
      RLo = DAG.getBitcast(ExtVT, RLo);
      RHi = DAG.getBitcast(ExtVT, RHi);

      // r = VSELECT(r, shift(r, 4), a);
      SDValue MLo = DAG.getNode(ShiftOpcode, dl, ExtVT, RLo,
                                DAG.getConstant(4, dl, ExtVT));
      SDValue MHi = DAG.getNode(ShiftOpcode, dl, ExtVT, RHi,
                                DAG.getConstant(4, dl, ExtVT));
      RLo = SignBitSelect(ExtVT, ALo, MLo, RLo);
      RHi = SignBitSelect(ExtVT, AHi, MHi, RHi);

      // a += a
      ALo = DAG.getNode(ISD::ADD, dl, ExtVT, ALo, ALo);
      AHi = DAG.getNode(ISD::ADD, dl, ExtVT, AHi, AHi);

      // r = VSELECT(r, shift(r, 2), a);
      MLo = DAG.getNode(ShiftOpcode, dl, ExtVT, RLo,
                        DAG.getConstant(2, dl, ExtVT));
      MHi = DAG.getNode(ShiftOpcode, dl, ExtVT, RHi,
                        DAG.getConstant(2, dl, ExtVT));
      RLo = SignBitSelect(ExtVT, ALo, MLo, RLo);
      RHi = SignBitSelect(ExtVT, AHi, MHi, RHi);

      // a += a
      ALo = DAG.getNode(ISD::ADD, dl, ExtVT, ALo, ALo);
      AHi = DAG.getNode(ISD::ADD, dl, ExtVT, AHi, AHi);

      // r = VSELECT(r, shift(r, 1), a);
      MLo = DAG.getNode(ShiftOpcode, dl, ExtVT, RLo,
                        DAG.getConstant(1, dl, ExtVT));
      MHi = DAG.getNode(ShiftOpcode, dl, ExtVT, RHi,
                        DAG.getConstant(1, dl, ExtVT));
      RLo = SignBitSelect(ExtVT, ALo, MLo, RLo);
      RHi = SignBitSelect(ExtVT, AHi, MHi, RHi);

      // Logical shift the result back to the lower byte, leaving a zero upper
      // byte
      // meaning that we can safely pack with PACKUSWB.
      RLo =
          DAG.getNode(ISD::SRL, dl, ExtVT, RLo, DAG.getConstant(8, dl, ExtVT));
      RHi =
          DAG.getNode(ISD::SRL, dl, ExtVT, RHi, DAG.getConstant(8, dl, ExtVT));
      return DAG.getNode(X86ISD::PACKUS, dl, VT, RLo, RHi);
    }
  }

  if (Subtarget.hasInt256() && !Subtarget.hasXOP() && VT == MVT::v16i16) {
    MVT ExtVT = MVT::v8i32;
    SDValue Z = getZeroVector(VT, Subtarget, DAG, dl);
    SDValue ALo = DAG.getNode(X86ISD::UNPCKL, dl, VT, Amt, Z);
    SDValue AHi = DAG.getNode(X86ISD::UNPCKH, dl, VT, Amt, Z);
    SDValue RLo = DAG.getNode(X86ISD::UNPCKL, dl, VT, Z, R);
    SDValue RHi = DAG.getNode(X86ISD::UNPCKH, dl, VT, Z, R);
    ALo = DAG.getBitcast(ExtVT, ALo);
    AHi = DAG.getBitcast(ExtVT, AHi);
    RLo = DAG.getBitcast(ExtVT, RLo);
    RHi = DAG.getBitcast(ExtVT, RHi);
    SDValue Lo = DAG.getNode(Op.getOpcode(), dl, ExtVT, RLo, ALo);
    SDValue Hi = DAG.getNode(Op.getOpcode(), dl, ExtVT, RHi, AHi);
    Lo = DAG.getNode(ISD::SRL, dl, ExtVT, Lo, DAG.getConstant(16, dl, ExtVT));
    Hi = DAG.getNode(ISD::SRL, dl, ExtVT, Hi, DAG.getConstant(16, dl, ExtVT));
    return DAG.getNode(X86ISD::PACKUS, dl, VT, Lo, Hi);
  }

  if (VT == MVT::v8i16) {
    unsigned ShiftOpcode = Op->getOpcode();

    // If we have a constant shift amount, the non-SSE41 path is best as
    // avoiding bitcasts make it easier to constant fold and reduce to PBLENDW.
    bool UseSSE41 = Subtarget.hasSSE41() &&
                    !ISD::isBuildVectorOfConstantSDNodes(Amt.getNode());

    auto SignBitSelect = [&](SDValue Sel, SDValue V0, SDValue V1) {
      // On SSE41 targets we make use of the fact that VSELECT lowers
      // to PBLENDVB which selects bytes based just on the sign bit.
      if (UseSSE41) {
        MVT ExtVT = MVT::getVectorVT(MVT::i8, VT.getVectorNumElements() * 2);
        V0 = DAG.getBitcast(ExtVT, V0);
        V1 = DAG.getBitcast(ExtVT, V1);
        Sel = DAG.getBitcast(ExtVT, Sel);
        return DAG.getBitcast(VT, DAG.getSelect(dl, ExtVT, Sel, V0, V1));
      }
      // On pre-SSE41 targets we splat the sign bit - a negative value will
      // set all bits of the lanes to true and VSELECT uses that in
      // its OR(AND(V0,C),AND(V1,~C)) lowering.
      SDValue C =
          DAG.getNode(ISD::SRA, dl, VT, Sel, DAG.getConstant(15, dl, VT));
      return DAG.getSelect(dl, VT, C, V0, V1);
    };

    // Turn 'a' into a mask suitable for VSELECT: a = a << 12;
    if (UseSSE41) {
      // On SSE41 targets we need to replicate the shift mask in both
      // bytes for PBLENDVB.
      Amt = DAG.getNode(
          ISD::OR, dl, VT,
          DAG.getNode(ISD::SHL, dl, VT, Amt, DAG.getConstant(4, dl, VT)),
          DAG.getNode(ISD::SHL, dl, VT, Amt, DAG.getConstant(12, dl, VT)));
    } else {
      Amt = DAG.getNode(ISD::SHL, dl, VT, Amt, DAG.getConstant(12, dl, VT));
    }

    // r = VSELECT(r, shift(r, 8), a);
    SDValue M = DAG.getNode(ShiftOpcode, dl, VT, R, DAG.getConstant(8, dl, VT));
    R = SignBitSelect(Amt, M, R);

    // a += a
    Amt = DAG.getNode(ISD::ADD, dl, VT, Amt, Amt);

    // r = VSELECT(r, shift(r, 4), a);
    M = DAG.getNode(ShiftOpcode, dl, VT, R, DAG.getConstant(4, dl, VT));
    R = SignBitSelect(Amt, M, R);

    // a += a
    Amt = DAG.getNode(ISD::ADD, dl, VT, Amt, Amt);

    // r = VSELECT(r, shift(r, 2), a);
    M = DAG.getNode(ShiftOpcode, dl, VT, R, DAG.getConstant(2, dl, VT));
    R = SignBitSelect(Amt, M, R);

    // a += a
    Amt = DAG.getNode(ISD::ADD, dl, VT, Amt, Amt);

    // return VSELECT(r, shift(r, 1), a);
    M = DAG.getNode(ShiftOpcode, dl, VT, R, DAG.getConstant(1, dl, VT));
    R = SignBitSelect(Amt, M, R);
    return R;
  }

  // Decompose 256-bit shifts into smaller 128-bit shifts.
  if (VT.is256BitVector())
    return Lower256IntArith(Op, DAG);

  return SDValue();
}

static SDValue LowerRotate(SDValue Op, const X86Subtarget &Subtarget,
                           SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();
  SDLoc DL(Op);
  SDValue R = Op.getOperand(0);
  SDValue Amt = Op.getOperand(1);
  unsigned Opcode = Op.getOpcode();
  unsigned EltSizeInBits = VT.getScalarSizeInBits();

  if (Subtarget.hasAVX512()) {
    // Attempt to rotate by immediate.
    APInt UndefElts;
    SmallVector<APInt, 16> EltBits;
    if (getTargetConstantBitsFromNode(Amt, EltSizeInBits, UndefElts, EltBits)) {
      if (!UndefElts && llvm::all_of(EltBits, [EltBits](APInt &V) {
            return EltBits[0] == V;
          })) {
        unsigned Op = (Opcode == ISD::ROTL ? X86ISD::VROTLI : X86ISD::VROTRI);
        uint64_t RotateAmt = EltBits[0].urem(EltSizeInBits);
        return DAG.getNode(Op, DL, VT, R,
                           DAG.getConstant(RotateAmt, DL, MVT::i8));
      }
    }

    // Else, fall-back on VPROLV/VPRORV.
    return Op;
  }

  assert(VT.isVector() && "Custom lowering only for vector rotates!");
  assert(Subtarget.hasXOP() && "XOP support required for vector rotates!");
  assert((Opcode == ISD::ROTL) && "Only ROTL supported");

  // XOP has 128-bit vector variable + immediate rotates.
  // +ve/-ve Amt = rotate left/right - just need to handle ISD::ROTL.

  // Split 256-bit integers.
  if (VT.is256BitVector())
    return Lower256IntArith(Op, DAG);

  assert(VT.is128BitVector() && "Only rotate 128-bit vectors!");

  // Attempt to rotate by immediate.
  if (auto *BVAmt = dyn_cast<BuildVectorSDNode>(Amt)) {
    if (auto *RotateConst = BVAmt->getConstantSplatNode()) {
      uint64_t RotateAmt = RotateConst->getAPIntValue().getZExtValue();
      assert(RotateAmt < EltSizeInBits && "Rotation out of range");
      return DAG.getNode(X86ISD::VROTLI, DL, VT, R,
                         DAG.getConstant(RotateAmt, DL, MVT::i8));
    }
  }

  // Use general rotate by variable (per-element).
  return Op;
}

static SDValue LowerXALUO(SDValue Op, SelectionDAG &DAG) {
  // Lower the "add/sub/mul with overflow" instruction into a regular ins plus
  // a "setcc" instruction that checks the overflow flag. The "brcond" lowering
  // looks for this combo and may remove the "setcc" instruction if the "setcc"
  // has only one use.
  SDNode *N = Op.getNode();
  SDValue LHS = N->getOperand(0);
  SDValue RHS = N->getOperand(1);
  unsigned BaseOp = 0;
  X86::CondCode Cond;
  SDLoc DL(Op);
  switch (Op.getOpcode()) {
  default: llvm_unreachable("Unknown ovf instruction!");
  case ISD::SADDO:
    // A subtract of one will be selected as a INC. Note that INC doesn't
    // set CF, so we can't do this for UADDO.
    if (isOneConstant(RHS)) {
      BaseOp = X86ISD::INC;
      Cond = X86::COND_O;
      break;
    }
    BaseOp = X86ISD::ADD;
    Cond = X86::COND_O;
    break;
  case ISD::UADDO:
    BaseOp = X86ISD::ADD;
    Cond = X86::COND_B;
    break;
  case ISD::SSUBO:
    // A subtract of one will be selected as a DEC. Note that DEC doesn't
    // set CF, so we can't do this for USUBO.
    if (isOneConstant(RHS)) {
      BaseOp = X86ISD::DEC;
      Cond = X86::COND_O;
      break;
    }
    BaseOp = X86ISD::SUB;
    Cond = X86::COND_O;
    break;
  case ISD::USUBO:
    BaseOp = X86ISD::SUB;
    Cond = X86::COND_B;
    break;
  case ISD::SMULO:
    BaseOp = N->getValueType(0) == MVT::i8 ? X86ISD::SMUL8 : X86ISD::SMUL;
    Cond = X86::COND_O;
    break;
  case ISD::UMULO: { // i64, i8 = umulo lhs, rhs --> i64, i64, i32 umul lhs,rhs
    if (N->getValueType(0) == MVT::i8) {
      BaseOp = X86ISD::UMUL8;
      Cond = X86::COND_O;
      break;
    }
    SDVTList VTs = DAG.getVTList(N->getValueType(0), N->getValueType(0),
                                 MVT::i32);
    SDValue Sum = DAG.getNode(X86ISD::UMUL, DL, VTs, LHS, RHS);

    SDValue SetCC = getSETCC(X86::COND_O, SDValue(Sum.getNode(), 2), DL, DAG);

    if (N->getValueType(1) == MVT::i1)
      SetCC = DAG.getNode(ISD::TRUNCATE, DL, MVT::i1, SetCC);

    return DAG.getNode(ISD::MERGE_VALUES, DL, N->getVTList(), Sum, SetCC);
  }
  }

  // Also sets EFLAGS.
  SDVTList VTs = DAG.getVTList(N->getValueType(0), MVT::i32);
  SDValue Sum = DAG.getNode(BaseOp, DL, VTs, LHS, RHS);

  SDValue SetCC = getSETCC(Cond, SDValue(Sum.getNode(), 1), DL, DAG);

  if (N->getValueType(1) == MVT::i1)
    SetCC = DAG.getNode(ISD::TRUNCATE, DL, MVT::i1, SetCC);

  return DAG.getNode(ISD::MERGE_VALUES, DL, N->getVTList(), Sum, SetCC);
}

/// Returns true if the operand type is exactly twice the native width, and
/// the corresponding cmpxchg8b or cmpxchg16b instruction is available.
/// Used to know whether to use cmpxchg8/16b when expanding atomic operations
/// (otherwise we leave them alone to become __sync_fetch_and_... calls).
bool X86TargetLowering::needsCmpXchgNb(Type *MemType) const {
  unsigned OpWidth = MemType->getPrimitiveSizeInBits();

  if (OpWidth == 64)
    return !Subtarget.is64Bit(); // FIXME this should be Subtarget.hasCmpxchg8b
  else if (OpWidth == 128)
    return Subtarget.hasCmpxchg16b();
  else
    return false;
}

bool X86TargetLowering::shouldExpandAtomicStoreInIR(StoreInst *SI) const {
  return needsCmpXchgNb(SI->getValueOperand()->getType());
}

// Note: this turns large loads into lock cmpxchg8b/16b.
// FIXME: On 32 bits x86, fild/movq might be faster than lock cmpxchg8b.
TargetLowering::AtomicExpansionKind
X86TargetLowering::shouldExpandAtomicLoadInIR(LoadInst *LI) const {
  auto PTy = cast<PointerType>(LI->getPointerOperandType());
  return needsCmpXchgNb(PTy->getElementType()) ? AtomicExpansionKind::CmpXChg
                                               : AtomicExpansionKind::None;
}

TargetLowering::AtomicExpansionKind
X86TargetLowering::shouldExpandAtomicRMWInIR(AtomicRMWInst *AI) const {
  unsigned NativeWidth = Subtarget.is64Bit() ? 64 : 32;
  Type *MemType = AI->getType();

  // If the operand is too big, we must see if cmpxchg8/16b is available
  // and default to library calls otherwise.
  if (MemType->getPrimitiveSizeInBits() > NativeWidth) {
    return needsCmpXchgNb(MemType) ? AtomicExpansionKind::CmpXChg
                                   : AtomicExpansionKind::None;
  }

  AtomicRMWInst::BinOp Op = AI->getOperation();
  switch (Op) {
  default:
    llvm_unreachable("Unknown atomic operation");
  case AtomicRMWInst::Xchg:
  case AtomicRMWInst::Add:
  case AtomicRMWInst::Sub:
    // It's better to use xadd, xsub or xchg for these in all cases.
    return AtomicExpansionKind::None;
  case AtomicRMWInst::Or:
  case AtomicRMWInst::And:
  case AtomicRMWInst::Xor:
    // If the atomicrmw's result isn't actually used, we can just add a "lock"
    // prefix to a normal instruction for these operations.
    return !AI->use_empty() ? AtomicExpansionKind::CmpXChg
                            : AtomicExpansionKind::None;
  case AtomicRMWInst::Nand:
  case AtomicRMWInst::Max:
  case AtomicRMWInst::Min:
  case AtomicRMWInst::UMax:
  case AtomicRMWInst::UMin:
    // These always require a non-trivial set of data operations on x86. We must
    // use a cmpxchg loop.
    return AtomicExpansionKind::CmpXChg;
  }
}

LoadInst *
X86TargetLowering::lowerIdempotentRMWIntoFencedLoad(AtomicRMWInst *AI) const {
  unsigned NativeWidth = Subtarget.is64Bit() ? 64 : 32;
  Type *MemType = AI->getType();
  // Accesses larger than the native width are turned into cmpxchg/libcalls, so
  // there is no benefit in turning such RMWs into loads, and it is actually
  // harmful as it introduces a mfence.
  if (MemType->getPrimitiveSizeInBits() > NativeWidth)
    return nullptr;

  auto Builder = IRBuilder<>(AI);
  Module *M = Builder.GetInsertBlock()->getParent()->getParent();
  auto SSID = AI->getSyncScopeID();
  // We must restrict the ordering to avoid generating loads with Release or
  // ReleaseAcquire orderings.
  auto Order = AtomicCmpXchgInst::getStrongestFailureOrdering(AI->getOrdering());
  auto Ptr = AI->getPointerOperand();

  // Before the load we need a fence. Here is an example lifted from
  // http://www.hpl.hp.com/techreports/2012/HPL-2012-68.pdf showing why a fence
  // is required:
  // Thread 0:
  //   x.store(1, relaxed);
  //   r1 = y.fetch_add(0, release);
  // Thread 1:
  //   y.fetch_add(42, acquire);
  //   r2 = x.load(relaxed);
  // r1 = r2 = 0 is impossible, but becomes possible if the idempotent rmw is
  // lowered to just a load without a fence. A mfence flushes the store buffer,
  // making the optimization clearly correct.
  // FIXME: it is required if isReleaseOrStronger(Order) but it is not clear
  // otherwise, we might be able to be more aggressive on relaxed idempotent
  // rmw. In practice, they do not look useful, so we don't try to be
  // especially clever.
  if (SSID == SyncScope::SingleThread)
    // FIXME: we could just insert an X86ISD::MEMBARRIER here, except we are at
    // the IR level, so we must wrap it in an intrinsic.
    return nullptr;

  if (!Subtarget.hasMFence())
    // FIXME: it might make sense to use a locked operation here but on a
    // different cache-line to prevent cache-line bouncing. In practice it
    // is probably a small win, and x86 processors without mfence are rare
    // enough that we do not bother.
    return nullptr;

  Function *MFence =
      llvm::Intrinsic::getDeclaration(M, Intrinsic::x86_sse2_mfence);
  Builder.CreateCall(MFence, {});

  // Finally we can emit the atomic load.
  LoadInst *Loaded = Builder.CreateAlignedLoad(Ptr,
          AI->getType()->getPrimitiveSizeInBits());
  Loaded->setAtomic(Order, SSID);
  AI->replaceAllUsesWith(Loaded);
  AI->eraseFromParent();
  return Loaded;
}

static SDValue LowerATOMIC_FENCE(SDValue Op, const X86Subtarget &Subtarget,
                                 SelectionDAG &DAG) {
  SDLoc dl(Op);
  AtomicOrdering FenceOrdering = static_cast<AtomicOrdering>(
    cast<ConstantSDNode>(Op.getOperand(1))->getZExtValue());
  SyncScope::ID FenceSSID = static_cast<SyncScope::ID>(
    cast<ConstantSDNode>(Op.getOperand(2))->getZExtValue());

  // The only fence that needs an instruction is a sequentially-consistent
  // cross-thread fence.
  if (FenceOrdering == AtomicOrdering::SequentiallyConsistent &&
      FenceSSID == SyncScope::System) {
    if (Subtarget.hasMFence())
      return DAG.getNode(X86ISD::MFENCE, dl, MVT::Other, Op.getOperand(0));

    SDValue Chain = Op.getOperand(0);
    SDValue Zero = DAG.getConstant(0, dl, MVT::i32);
    SDValue Ops[] = {
      DAG.getRegister(X86::ESP, MVT::i32),     // Base
      DAG.getTargetConstant(1, dl, MVT::i8),   // Scale
      DAG.getRegister(0, MVT::i32),            // Index
      DAG.getTargetConstant(0, dl, MVT::i32),  // Disp
      DAG.getRegister(0, MVT::i32),            // Segment.
      Zero,
      Chain
    };
    SDNode *Res = DAG.getMachineNode(X86::OR32mrLocked, dl, MVT::Other, Ops);
    return SDValue(Res, 0);
  }

  // MEMBARRIER is a compiler barrier; it codegens to a no-op.
  return DAG.getNode(X86ISD::MEMBARRIER, dl, MVT::Other, Op.getOperand(0));
}

static SDValue LowerCMP_SWAP(SDValue Op, const X86Subtarget &Subtarget,
                             SelectionDAG &DAG) {
  MVT T = Op.getSimpleValueType();
  SDLoc DL(Op);
  unsigned Reg = 0;
  unsigned size = 0;
  switch(T.SimpleTy) {
  default: llvm_unreachable("Invalid value type!");
  case MVT::i8:  Reg = X86::AL;  size = 1; break;
  case MVT::i16: Reg = X86::AX;  size = 2; break;
  case MVT::i32: Reg = X86::EAX; size = 4; break;
  case MVT::i64:
    assert(Subtarget.is64Bit() && "Node not type legal!");
    Reg = X86::RAX; size = 8;
    break;
  }
  SDValue cpIn = DAG.getCopyToReg(Op.getOperand(0), DL, Reg,
                                  Op.getOperand(2), SDValue());
  SDValue Ops[] = { cpIn.getValue(0),
                    Op.getOperand(1),
                    Op.getOperand(3),
                    DAG.getTargetConstant(size, DL, MVT::i8),
                    cpIn.getValue(1) };
  SDVTList Tys = DAG.getVTList(MVT::Other, MVT::Glue);
  MachineMemOperand *MMO = cast<AtomicSDNode>(Op)->getMemOperand();
  SDValue Result = DAG.getMemIntrinsicNode(X86ISD::LCMPXCHG_DAG, DL, Tys,
                                           Ops, T, MMO);

  SDValue cpOut =
    DAG.getCopyFromReg(Result.getValue(0), DL, Reg, T, Result.getValue(1));
  SDValue EFLAGS = DAG.getCopyFromReg(cpOut.getValue(1), DL, X86::EFLAGS,
                                      MVT::i32, cpOut.getValue(2));
  SDValue Success = getSETCC(X86::COND_E, EFLAGS, DL, DAG);

  DAG.ReplaceAllUsesOfValueWith(Op.getValue(0), cpOut);
  DAG.ReplaceAllUsesOfValueWith(Op.getValue(1), Success);
  DAG.ReplaceAllUsesOfValueWith(Op.getValue(2), EFLAGS.getValue(1));
  return SDValue();
}

static SDValue LowerBITCAST(SDValue Op, const X86Subtarget &Subtarget,
                            SelectionDAG &DAG) {
  MVT SrcVT = Op.getOperand(0).getSimpleValueType();
  MVT DstVT = Op.getSimpleValueType();

  if (SrcVT == MVT::v2i32 || SrcVT == MVT::v4i16 || SrcVT == MVT::v8i8 ||
      SrcVT == MVT::i64) {
    assert(Subtarget.hasSSE2() && "Requires at least SSE2!");
    if (DstVT != MVT::f64)
      // This conversion needs to be expanded.
      return SDValue();

    SDValue Op0 = Op->getOperand(0);
    SmallVector<SDValue, 16> Elts;
    SDLoc dl(Op);
    unsigned NumElts;
    MVT SVT;
    if (SrcVT.isVector()) {
      NumElts = SrcVT.getVectorNumElements();
      SVT = SrcVT.getVectorElementType();

      // Widen the vector in input in the case of MVT::v2i32.
      // Example: from MVT::v2i32 to MVT::v4i32.
      for (unsigned i = 0, e = NumElts; i != e; ++i)
        Elts.push_back(DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, SVT, Op0,
                                   DAG.getIntPtrConstant(i, dl)));
    } else {
      assert(SrcVT == MVT::i64 && !Subtarget.is64Bit() &&
             "Unexpected source type in LowerBITCAST");
      Elts.push_back(DAG.getNode(ISD::EXTRACT_ELEMENT, dl, MVT::i32, Op0,
                                 DAG.getIntPtrConstant(0, dl)));
      Elts.push_back(DAG.getNode(ISD::EXTRACT_ELEMENT, dl, MVT::i32, Op0,
                                 DAG.getIntPtrConstant(1, dl)));
      NumElts = 2;
      SVT = MVT::i32;
    }
    // Explicitly mark the extra elements as Undef.
    Elts.append(NumElts, DAG.getUNDEF(SVT));

    EVT NewVT = EVT::getVectorVT(*DAG.getContext(), SVT, NumElts * 2);
    SDValue BV = DAG.getBuildVector(NewVT, dl, Elts);
    SDValue ToV2F64 = DAG.getBitcast(MVT::v2f64, BV);
    return DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, MVT::f64, ToV2F64,
                       DAG.getIntPtrConstant(0, dl));
  }

  assert(Subtarget.is64Bit() && !Subtarget.hasSSE2() &&
         Subtarget.hasMMX() && "Unexpected custom BITCAST");
  assert((DstVT == MVT::i64 ||
          (DstVT.isVector() && DstVT.getSizeInBits()==64)) &&
         "Unexpected custom BITCAST");
  // i64 <=> MMX conversions are Legal.
  if (SrcVT==MVT::i64 && DstVT.isVector())
    return Op;
  if (DstVT==MVT::i64 && SrcVT.isVector())
    return Op;
  // MMX <=> MMX conversions are Legal.
  if (SrcVT.isVector() && DstVT.isVector())
    return Op;
  // All other conversions need to be expanded.
  return SDValue();
}

/// Compute the horizontal sum of bytes in V for the elements of VT.
///
/// Requires V to be a byte vector and VT to be an integer vector type with
/// wider elements than V's type. The width of the elements of VT determines
/// how many bytes of V are summed horizontally to produce each element of the
/// result.
static SDValue LowerHorizontalByteSum(SDValue V, MVT VT,
                                      const X86Subtarget &Subtarget,
                                      SelectionDAG &DAG) {
  SDLoc DL(V);
  MVT ByteVecVT = V.getSimpleValueType();
  MVT EltVT = VT.getVectorElementType();
  assert(ByteVecVT.getVectorElementType() == MVT::i8 &&
         "Expected value to have byte element type.");
  assert(EltVT != MVT::i8 &&
         "Horizontal byte sum only makes sense for wider elements!");
  unsigned VecSize = VT.getSizeInBits();
  assert(ByteVecVT.getSizeInBits() == VecSize && "Cannot change vector size!");

  // PSADBW instruction horizontally add all bytes and leave the result in i64
  // chunks, thus directly computes the pop count for v2i64 and v4i64.
  if (EltVT == MVT::i64) {
    SDValue Zeros = getZeroVector(ByteVecVT, Subtarget, DAG, DL);
    MVT SadVecVT = MVT::getVectorVT(MVT::i64, VecSize / 64);
    V = DAG.getNode(X86ISD::PSADBW, DL, SadVecVT, V, Zeros);
    return DAG.getBitcast(VT, V);
  }

  if (EltVT == MVT::i32) {
    // We unpack the low half and high half into i32s interleaved with zeros so
    // that we can use PSADBW to horizontally sum them. The most useful part of
    // this is that it lines up the results of two PSADBW instructions to be
    // two v2i64 vectors which concatenated are the 4 population counts. We can
    // then use PACKUSWB to shrink and concatenate them into a v4i32 again.
    SDValue Zeros = getZeroVector(VT, Subtarget, DAG, DL);
    SDValue V32 = DAG.getBitcast(VT, V);
    SDValue Low = DAG.getNode(X86ISD::UNPCKL, DL, VT, V32, Zeros);
    SDValue High = DAG.getNode(X86ISD::UNPCKH, DL, VT, V32, Zeros);

    // Do the horizontal sums into two v2i64s.
    Zeros = getZeroVector(ByteVecVT, Subtarget, DAG, DL);
    MVT SadVecVT = MVT::getVectorVT(MVT::i64, VecSize / 64);
    Low = DAG.getNode(X86ISD::PSADBW, DL, SadVecVT,
                      DAG.getBitcast(ByteVecVT, Low), Zeros);
    High = DAG.getNode(X86ISD::PSADBW, DL, SadVecVT,
                       DAG.getBitcast(ByteVecVT, High), Zeros);

    // Merge them together.
    MVT ShortVecVT = MVT::getVectorVT(MVT::i16, VecSize / 16);
    V = DAG.getNode(X86ISD::PACKUS, DL, ByteVecVT,
                    DAG.getBitcast(ShortVecVT, Low),
                    DAG.getBitcast(ShortVecVT, High));

    return DAG.getBitcast(VT, V);
  }

  // The only element type left is i16.
  assert(EltVT == MVT::i16 && "Unknown how to handle type");

  // To obtain pop count for each i16 element starting from the pop count for
  // i8 elements, shift the i16s left by 8, sum as i8s, and then shift as i16s
  // right by 8. It is important to shift as i16s as i8 vector shift isn't
  // directly supported.
  SDValue ShifterV = DAG.getConstant(8, DL, VT);
  SDValue Shl = DAG.getNode(ISD::SHL, DL, VT, DAG.getBitcast(VT, V), ShifterV);
  V = DAG.getNode(ISD::ADD, DL, ByteVecVT, DAG.getBitcast(ByteVecVT, Shl),
                  DAG.getBitcast(ByteVecVT, V));
  return DAG.getNode(ISD::SRL, DL, VT, DAG.getBitcast(VT, V), ShifterV);
}

static SDValue LowerVectorCTPOPInRegLUT(SDValue Op, const SDLoc &DL,
                                        const X86Subtarget &Subtarget,
                                        SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();
  MVT EltVT = VT.getVectorElementType();
  unsigned VecSize = VT.getSizeInBits();

  // Implement a lookup table in register by using an algorithm based on:
  // http://wm.ite.pl/articles/sse-popcount.html
  //
  // The general idea is that every lower byte nibble in the input vector is an
  // index into a in-register pre-computed pop count table. We then split up the
  // input vector in two new ones: (1) a vector with only the shifted-right
  // higher nibbles for each byte and (2) a vector with the lower nibbles (and
  // masked out higher ones) for each byte. PSHUFB is used separately with both
  // to index the in-register table. Next, both are added and the result is a
  // i8 vector where each element contains the pop count for input byte.
  //
  // To obtain the pop count for elements != i8, we follow up with the same
  // approach and use additional tricks as described below.
  //
  const int LUT[16] = {/* 0 */ 0, /* 1 */ 1, /* 2 */ 1, /* 3 */ 2,
                       /* 4 */ 1, /* 5 */ 2, /* 6 */ 2, /* 7 */ 3,
                       /* 8 */ 1, /* 9 */ 2, /* a */ 2, /* b */ 3,
                       /* c */ 2, /* d */ 3, /* e */ 3, /* f */ 4};

  int NumByteElts = VecSize / 8;
  MVT ByteVecVT = MVT::getVectorVT(MVT::i8, NumByteElts);
  SDValue In = DAG.getBitcast(ByteVecVT, Op);
  SmallVector<SDValue, 64> LUTVec;
  for (int i = 0; i < NumByteElts; ++i)
    LUTVec.push_back(DAG.getConstant(LUT[i % 16], DL, MVT::i8));
  SDValue InRegLUT = DAG.getBuildVector(ByteVecVT, DL, LUTVec);
  SDValue M0F = DAG.getConstant(0x0F, DL, ByteVecVT);

  // High nibbles
  SDValue FourV = DAG.getConstant(4, DL, ByteVecVT);
  SDValue HighNibbles = DAG.getNode(ISD::SRL, DL, ByteVecVT, In, FourV);

  // Low nibbles
  SDValue LowNibbles = DAG.getNode(ISD::AND, DL, ByteVecVT, In, M0F);

  // The input vector is used as the shuffle mask that index elements into the
  // LUT. After counting low and high nibbles, add the vector to obtain the
  // final pop count per i8 element.
  SDValue HighPopCnt =
      DAG.getNode(X86ISD::PSHUFB, DL, ByteVecVT, InRegLUT, HighNibbles);
  SDValue LowPopCnt =
      DAG.getNode(X86ISD::PSHUFB, DL, ByteVecVT, InRegLUT, LowNibbles);
  SDValue PopCnt = DAG.getNode(ISD::ADD, DL, ByteVecVT, HighPopCnt, LowPopCnt);

  if (EltVT == MVT::i8)
    return PopCnt;

  return LowerHorizontalByteSum(PopCnt, VT, Subtarget, DAG);
}

static SDValue LowerVectorCTPOPBitmath(SDValue Op, const SDLoc &DL,
                                       const X86Subtarget &Subtarget,
                                       SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();
  assert(VT.is128BitVector() &&
         "Only 128-bit vector bitmath lowering supported.");

  int VecSize = VT.getSizeInBits();
  MVT EltVT = VT.getVectorElementType();
  int Len = EltVT.getSizeInBits();

  // This is the vectorized version of the "best" algorithm from
  // http://graphics.stanford.edu/~seander/bithacks.html#CountBitsSetParallel
  // with a minor tweak to use a series of adds + shifts instead of vector
  // multiplications. Implemented for all integer vector types. We only use
  // this when we don't have SSSE3 which allows a LUT-based lowering that is
  // much faster, even faster than using native popcnt instructions.

  auto GetShift = [&](unsigned OpCode, SDValue V, int Shifter) {
    MVT VT = V.getSimpleValueType();
    SDValue ShifterV = DAG.getConstant(Shifter, DL, VT);
    return DAG.getNode(OpCode, DL, VT, V, ShifterV);
  };
  auto GetMask = [&](SDValue V, APInt Mask) {
    MVT VT = V.getSimpleValueType();
    SDValue MaskV = DAG.getConstant(Mask, DL, VT);
    return DAG.getNode(ISD::AND, DL, VT, V, MaskV);
  };

  // We don't want to incur the implicit masks required to SRL vNi8 vectors on
  // x86, so set the SRL type to have elements at least i16 wide. This is
  // correct because all of our SRLs are followed immediately by a mask anyways
  // that handles any bits that sneak into the high bits of the byte elements.
  MVT SrlVT = Len > 8 ? VT : MVT::getVectorVT(MVT::i16, VecSize / 16);

  SDValue V = Op;

  // v = v - ((v >> 1) & 0x55555555...)
  SDValue Srl =
      DAG.getBitcast(VT, GetShift(ISD::SRL, DAG.getBitcast(SrlVT, V), 1));
  SDValue And = GetMask(Srl, APInt::getSplat(Len, APInt(8, 0x55)));
  V = DAG.getNode(ISD::SUB, DL, VT, V, And);

  // v = (v & 0x33333333...) + ((v >> 2) & 0x33333333...)
  SDValue AndLHS = GetMask(V, APInt::getSplat(Len, APInt(8, 0x33)));
  Srl = DAG.getBitcast(VT, GetShift(ISD::SRL, DAG.getBitcast(SrlVT, V), 2));
  SDValue AndRHS = GetMask(Srl, APInt::getSplat(Len, APInt(8, 0x33)));
  V = DAG.getNode(ISD::ADD, DL, VT, AndLHS, AndRHS);

  // v = (v + (v >> 4)) & 0x0F0F0F0F...
  Srl = DAG.getBitcast(VT, GetShift(ISD::SRL, DAG.getBitcast(SrlVT, V), 4));
  SDValue Add = DAG.getNode(ISD::ADD, DL, VT, V, Srl);
  V = GetMask(Add, APInt::getSplat(Len, APInt(8, 0x0F)));

  // At this point, V contains the byte-wise population count, and we are
  // merely doing a horizontal sum if necessary to get the wider element
  // counts.
  if (EltVT == MVT::i8)
    return V;

  return LowerHorizontalByteSum(
      DAG.getBitcast(MVT::getVectorVT(MVT::i8, VecSize / 8), V), VT, Subtarget,
      DAG);
}

// Please ensure that any codegen change from LowerVectorCTPOP is reflected in
// updated cost models in X86TTIImpl::getIntrinsicInstrCost.
static SDValue LowerVectorCTPOP(SDValue Op, const X86Subtarget &Subtarget,
                                SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();
  assert((VT.is512BitVector() || VT.is256BitVector() || VT.is128BitVector()) &&
         "Unknown CTPOP type to handle");
  SDLoc DL(Op.getNode());
  SDValue Op0 = Op.getOperand(0);

  // TRUNC(CTPOP(ZEXT(X))) to make use of vXi32/vXi64 VPOPCNT instructions.
  if (Subtarget.hasVPOPCNTDQ()) {
    if (VT == MVT::v8i16) {
      Op = DAG.getNode(X86ISD::VZEXT, DL, MVT::v8i64, Op0);
      Op = DAG.getNode(ISD::CTPOP, DL, MVT::v8i64, Op);
      return DAG.getNode(X86ISD::VTRUNC, DL, VT, Op);
    }
    if (VT == MVT::v16i8 || VT == MVT::v16i16) {
      Op = DAG.getNode(X86ISD::VZEXT, DL, MVT::v16i32, Op0);
      Op = DAG.getNode(ISD::CTPOP, DL, MVT::v16i32, Op);
      return DAG.getNode(X86ISD::VTRUNC, DL, VT, Op);
    }
  }

  if (!Subtarget.hasSSSE3()) {
    // We can't use the fast LUT approach, so fall back on vectorized bitmath.
    assert(VT.is128BitVector() && "Only 128-bit vectors supported in SSE!");
    return LowerVectorCTPOPBitmath(Op0, DL, Subtarget, DAG);
  }

  // Decompose 256-bit ops into smaller 128-bit ops.
  if (VT.is256BitVector() && !Subtarget.hasInt256())
    return Lower256IntUnary(Op, DAG);

  // Decompose 512-bit ops into smaller 256-bit ops.
  if (VT.is512BitVector() && !Subtarget.hasBWI())
    return Lower512IntUnary(Op, DAG);

  return LowerVectorCTPOPInRegLUT(Op0, DL, Subtarget, DAG);
}

static SDValue LowerCTPOP(SDValue Op, const X86Subtarget &Subtarget,
                          SelectionDAG &DAG) {
  assert(Op.getSimpleValueType().isVector() &&
         "We only do custom lowering for vector population count.");
  return LowerVectorCTPOP(Op, Subtarget, DAG);
}

static SDValue LowerBITREVERSE_XOP(SDValue Op, SelectionDAG &DAG) {
  MVT VT = Op.getSimpleValueType();
  SDValue In = Op.getOperand(0);
  SDLoc DL(Op);

  // For scalars, its still beneficial to transfer to/from the SIMD unit to
  // perform the BITREVERSE.
  if (!VT.isVector()) {
    MVT VecVT = MVT::getVectorVT(VT, 128 / VT.getSizeInBits());
    SDValue Res = DAG.getNode(ISD::SCALAR_TO_VECTOR, DL, VecVT, In);
    Res = DAG.getNode(ISD::BITREVERSE, DL, VecVT, Res);
    return DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, VT, Res,
                       DAG.getIntPtrConstant(0, DL));
  }

  int NumElts = VT.getVectorNumElements();
  int ScalarSizeInBytes = VT.getScalarSizeInBits() / 8;

  // Decompose 256-bit ops into smaller 128-bit ops.
  if (VT.is256BitVector())
    return Lower256IntUnary(Op, DAG);

  assert(VT.is128BitVector() &&
         "Only 128-bit vector bitreverse lowering supported.");

  // VPPERM reverses the bits of a byte with the permute Op (2 << 5), and we
  // perform the BSWAP in the shuffle.
  // Its best to shuffle using the second operand as this will implicitly allow
  // memory folding for multiple vectors.
  SmallVector<SDValue, 16> MaskElts;
  for (int i = 0; i != NumElts; ++i) {
    for (int j = ScalarSizeInBytes - 1; j >= 0; --j) {
      int SourceByte = 16 + (i * ScalarSizeInBytes) + j;
      int PermuteByte = SourceByte | (2 << 5);
      MaskElts.push_back(DAG.getConstant(PermuteByte, DL, MVT::i8));
    }
  }

  SDValue Mask = DAG.getBuildVector(MVT::v16i8, DL, MaskElts);
  SDValue Res = DAG.getBitcast(MVT::v16i8, In);
  Res = DAG.getNode(X86ISD::VPPERM, DL, MVT::v16i8, DAG.getUNDEF(MVT::v16i8),
                    Res, Mask);
  return DAG.getBitcast(VT, Res);
}

static SDValue LowerBITREVERSE(SDValue Op, const X86Subtarget &Subtarget,
                               SelectionDAG &DAG) {
  if (Subtarget.hasXOP())
    return LowerBITREVERSE_XOP(Op, DAG);

  assert(Subtarget.hasSSSE3() && "SSSE3 required for BITREVERSE");

  MVT VT = Op.getSimpleValueType();
  SDValue In = Op.getOperand(0);
  SDLoc DL(Op);

  unsigned NumElts = VT.getVectorNumElements();
  assert(VT.getScalarType() == MVT::i8 &&
         "Only byte vector BITREVERSE supported");

  // Decompose 256-bit ops into smaller 128-bit ops on pre-AVX2.
  if (VT.is256BitVector() && !Subtarget.hasInt256())
    return Lower256IntUnary(Op, DAG);

  // Perform BITREVERSE using PSHUFB lookups. Each byte is split into
  // two nibbles and a PSHUFB lookup to find the bitreverse of each
  // 0-15 value (moved to the other nibble).
  SDValue NibbleMask = DAG.getConstant(0xF, DL, VT);
  SDValue Lo = DAG.getNode(ISD::AND, DL, VT, In, NibbleMask);
  SDValue Hi = DAG.getNode(ISD::SRL, DL, VT, In, DAG.getConstant(4, DL, VT));

  const int LoLUT[16] = {
      /* 0 */ 0x00, /* 1 */ 0x80, /* 2 */ 0x40, /* 3 */ 0xC0,
      /* 4 */ 0x20, /* 5 */ 0xA0, /* 6 */ 0x60, /* 7 */ 0xE0,
      /* 8 */ 0x10, /* 9 */ 0x90, /* a */ 0x50, /* b */ 0xD0,
      /* c */ 0x30, /* d */ 0xB0, /* e */ 0x70, /* f */ 0xF0};
  const int HiLUT[16] = {
      /* 0 */ 0x00, /* 1 */ 0x08, /* 2 */ 0x04, /* 3 */ 0x0C,
      /* 4 */ 0x02, /* 5 */ 0x0A, /* 6 */ 0x06, /* 7 */ 0x0E,
      /* 8 */ 0x01, /* 9 */ 0x09, /* a */ 0x05, /* b */ 0x0D,
      /* c */ 0x03, /* d */ 0x0B, /* e */ 0x07, /* f */ 0x0F};

  SmallVector<SDValue, 16> LoMaskElts, HiMaskElts;
  for (unsigned i = 0; i < NumElts; ++i) {
    LoMaskElts.push_back(DAG.getConstant(LoLUT[i % 16], DL, MVT::i8));
    HiMaskElts.push_back(DAG.getConstant(HiLUT[i % 16], DL, MVT::i8));
  }

  SDValue LoMask = DAG.getBuildVector(VT, DL, LoMaskElts);
  SDValue HiMask = DAG.getBuildVector(VT, DL, HiMaskElts);
  Lo = DAG.getNode(X86ISD::PSHUFB, DL, VT, LoMask, Lo);
  Hi = DAG.getNode(X86ISD::PSHUFB, DL, VT, HiMask, Hi);
  return DAG.getNode(ISD::OR, DL, VT, Lo, Hi);
}

static SDValue lowerAtomicArithWithLOCK(SDValue N, SelectionDAG &DAG,
                                        const X86Subtarget &Subtarget,
                                        bool AllowIncDec = true) {
  unsigned NewOpc = 0;
  switch (N->getOpcode()) {
  case ISD::ATOMIC_LOAD_ADD:
    NewOpc = X86ISD::LADD;
    break;
  case ISD::ATOMIC_LOAD_SUB:
    NewOpc = X86ISD::LSUB;
    break;
  case ISD::ATOMIC_LOAD_OR:
    NewOpc = X86ISD::LOR;
    break;
  case ISD::ATOMIC_LOAD_XOR:
    NewOpc = X86ISD::LXOR;
    break;
  case ISD::ATOMIC_LOAD_AND:
    NewOpc = X86ISD::LAND;
    break;
  default:
    llvm_unreachable("Unknown ATOMIC_LOAD_ opcode");
  }

  MachineMemOperand *MMO = cast<MemSDNode>(N)->getMemOperand();

  if (auto *C = dyn_cast<ConstantSDNode>(N->getOperand(2))) {
    // Convert to inc/dec if they aren't slow or we are optimizing for size.
    if (AllowIncDec && (!Subtarget.slowIncDec() ||
                        DAG.getMachineFunction().getFunction()->optForSize())) {
      if ((NewOpc == X86ISD::LADD && C->isOne()) ||
          (NewOpc == X86ISD::LSUB && C->isAllOnesValue()))
        return DAG.getMemIntrinsicNode(X86ISD::LINC, SDLoc(N),
                                       DAG.getVTList(MVT::i32, MVT::Other),
                                       {N->getOperand(0), N->getOperand(1)},
                                       /*MemVT=*/N->getSimpleValueType(0), MMO);
      if ((NewOpc == X86ISD::LSUB && C->isOne()) ||
          (NewOpc == X86ISD::LADD && C->isAllOnesValue()))
        return DAG.getMemIntrinsicNode(X86ISD::LDEC, SDLoc(N),
                                       DAG.getVTList(MVT::i32, MVT::Other),
                                       {N->getOperand(0), N->getOperand(1)},
                                       /*MemVT=*/N->getSimpleValueType(0), MMO);
    }
  }

  return DAG.getMemIntrinsicNode(
      NewOpc, SDLoc(N), DAG.getVTList(MVT::i32, MVT::Other),
      {N->getOperand(0), N->getOperand(1), N->getOperand(2)},
      /*MemVT=*/N->getSimpleValueType(0), MMO);
}

/// Lower atomic_load_ops into LOCK-prefixed operations.
static SDValue lowerAtomicArith(SDValue N, SelectionDAG &DAG,
                                const X86Subtarget &Subtarget) {
  SDValue Chain = N->getOperand(0);
  SDValue LHS = N->getOperand(1);
  SDValue RHS = N->getOperand(2);
  unsigned Opc = N->getOpcode();
  MVT VT = N->getSimpleValueType(0);
  SDLoc DL(N);

  // We can lower atomic_load_add into LXADD. However, any other atomicrmw op
  // can only be lowered when the result is unused.  They should have already
  // been transformed into a cmpxchg loop in AtomicExpand.
  if (N->hasAnyUseOfValue(0)) {
    // Handle (atomic_load_sub p, v) as (atomic_load_add p, -v), to be able to
    // select LXADD if LOCK_SUB can't be selected.
    if (Opc == ISD::ATOMIC_LOAD_SUB) {
      AtomicSDNode *AN = cast<AtomicSDNode>(N.getNode());
      RHS = DAG.getNode(ISD::SUB, DL, VT, DAG.getConstant(0, DL, VT), RHS);
      return DAG.getAtomic(ISD::ATOMIC_LOAD_ADD, DL, VT, Chain, LHS,
                           RHS, AN->getMemOperand());
    }
    assert(Opc == ISD::ATOMIC_LOAD_ADD &&
           "Used AtomicRMW ops other than Add should have been expanded!");
    return N;
  }

  SDValue LockOp = lowerAtomicArithWithLOCK(N, DAG, Subtarget);
  // RAUW the chain, but don't worry about the result, as it's unused.
  assert(!N->hasAnyUseOfValue(0));
  DAG.ReplaceAllUsesOfValueWith(N.getValue(1), LockOp.getValue(1));
  return SDValue();
}

static SDValue LowerATOMIC_STORE(SDValue Op, SelectionDAG &DAG) {
  SDNode *Node = Op.getNode();
  SDLoc dl(Node);
  EVT VT = cast<AtomicSDNode>(Node)->getMemoryVT();

  // Convert seq_cst store -> xchg
  // Convert wide store -> swap (-> cmpxchg8b/cmpxchg16b)
  // FIXME: On 32-bit, store -> fist or movq would be more efficient
  //        (The only way to get a 16-byte store is cmpxchg16b)
  // FIXME: 16-byte ATOMIC_SWAP isn't actually hooked up at the moment.
  if (cast<AtomicSDNode>(Node)->getOrdering() ==
          AtomicOrdering::SequentiallyConsistent ||
      !DAG.getTargetLoweringInfo().isTypeLegal(VT)) {
    SDValue Swap = DAG.getAtomic(ISD::ATOMIC_SWAP, dl,
                                 cast<AtomicSDNode>(Node)->getMemoryVT(),
                                 Node->getOperand(0),
                                 Node->getOperand(1), Node->getOperand(2),
                                 cast<AtomicSDNode>(Node)->getMemOperand());
    return Swap.getValue(1);
  }
  // Other atomic stores have a simple pattern.
  return Op;
}

static SDValue LowerADDSUBCARRY(SDValue Op, SelectionDAG &DAG) {
  SDNode *N = Op.getNode();
  MVT VT = N->getSimpleValueType(0);

  // Let legalize expand this if it isn't a legal type yet.
  if (!DAG.getTargetLoweringInfo().isTypeLegal(VT))
    return SDValue();

  SDVTList VTs = DAG.getVTList(VT, MVT::i32);
  SDLoc DL(N);

  // Set the carry flag.
  SDValue Carry = Op.getOperand(2);
  EVT CarryVT = Carry.getValueType();
  APInt NegOne = APInt::getAllOnesValue(CarryVT.getScalarSizeInBits());
  Carry = DAG.getNode(X86ISD::ADD, DL, DAG.getVTList(CarryVT, MVT::i32),
                      Carry, DAG.getConstant(NegOne, DL, CarryVT));

  unsigned Opc = Op.getOpcode() == ISD::ADDCARRY ? X86ISD::ADC : X86ISD::SBB;
  SDValue Sum = DAG.getNode(Opc, DL, VTs, Op.getOperand(0),
                            Op.getOperand(1), Carry.getValue(1));

  SDValue SetCC = getSETCC(X86::COND_B, Sum.getValue(1), DL, DAG);
  if (N->getValueType(1) == MVT::i1)
    SetCC = DAG.getNode(ISD::TRUNCATE, DL, MVT::i1, SetCC);

  return DAG.getNode(ISD::MERGE_VALUES, DL, N->getVTList(), Sum, SetCC);
}

static SDValue LowerFSINCOS(SDValue Op, const X86Subtarget &Subtarget,
                            SelectionDAG &DAG) {
  assert(Subtarget.isTargetDarwin() && Subtarget.is64Bit());

  // For MacOSX, we want to call an alternative entry point: __sincos_stret,
  // which returns the values as { float, float } (in XMM0) or
  // { double, double } (which is returned in XMM0, XMM1).
  SDLoc dl(Op);
  SDValue Arg = Op.getOperand(0);
  EVT ArgVT = Arg.getValueType();
  Type *ArgTy = ArgVT.getTypeForEVT(*DAG.getContext());

  TargetLowering::ArgListTy Args;
  TargetLowering::ArgListEntry Entry;

  Entry.Node = Arg;
  Entry.Ty = ArgTy;
  Entry.IsSExt = false;
  Entry.IsZExt = false;
  Args.push_back(Entry);

  bool isF64 = ArgVT == MVT::f64;
  // Only optimize x86_64 for now. i386 is a bit messy. For f32,
  // the small struct {f32, f32} is returned in (eax, edx). For f64,
  // the results are returned via SRet in memory.
  const char *LibcallName =  isF64 ? "__sincos_stret" : "__sincosf_stret";
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  SDValue Callee =
      DAG.getExternalSymbol(LibcallName, TLI.getPointerTy(DAG.getDataLayout()));

  Type *RetTy = isF64 ? (Type *)StructType::get(ArgTy, ArgTy)
                      : (Type *)VectorType::get(ArgTy, 4);

  TargetLowering::CallLoweringInfo CLI(DAG);
  CLI.setDebugLoc(dl)
      .setChain(DAG.getEntryNode())
      .setLibCallee(CallingConv::C, RetTy, Callee, std::move(Args));

  std::pair<SDValue, SDValue> CallResult = TLI.LowerCallTo(CLI);

  if (isF64)
    // Returned in xmm0 and xmm1.
    return CallResult.first;

  // Returned in bits 0:31 and 32:64 xmm0.
  SDValue SinVal = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, ArgVT,
                               CallResult.first, DAG.getIntPtrConstant(0, dl));
  SDValue CosVal = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, ArgVT,
                               CallResult.first, DAG.getIntPtrConstant(1, dl));
  SDVTList Tys = DAG.getVTList(ArgVT, ArgVT);
  return DAG.getNode(ISD::MERGE_VALUES, dl, Tys, SinVal, CosVal);
}

/// Widen a vector input to a vector of NVT.  The
/// input vector must have the same element type as NVT.
static SDValue ExtendToType(SDValue InOp, MVT NVT, SelectionDAG &DAG,
                            bool FillWithZeroes = false) {
  // Check if InOp already has the right width.
  MVT InVT = InOp.getSimpleValueType();
  if (InVT == NVT)
    return InOp;

  if (InOp.isUndef())
    return DAG.getUNDEF(NVT);

  assert(InVT.getVectorElementType() == NVT.getVectorElementType() &&
         "input and widen element type must match");

  unsigned InNumElts = InVT.getVectorNumElements();
  unsigned WidenNumElts = NVT.getVectorNumElements();
  assert(WidenNumElts > InNumElts && WidenNumElts % InNumElts == 0 &&
         "Unexpected request for vector widening");

  SDLoc dl(InOp);
  if (InOp.getOpcode() == ISD::CONCAT_VECTORS &&
      InOp.getNumOperands() == 2) {
    SDValue N1 = InOp.getOperand(1);
    if ((ISD::isBuildVectorAllZeros(N1.getNode()) && FillWithZeroes) ||
        N1.isUndef()) {
      InOp = InOp.getOperand(0);
      InVT = InOp.getSimpleValueType();
      InNumElts = InVT.getVectorNumElements();
    }
  }
  if (ISD::isBuildVectorOfConstantSDNodes(InOp.getNode()) ||
      ISD::isBuildVectorOfConstantFPSDNodes(InOp.getNode())) {
    SmallVector<SDValue, 16> Ops;
    for (unsigned i = 0; i < InNumElts; ++i)
      Ops.push_back(InOp.getOperand(i));

    EVT EltVT = InOp.getOperand(0).getValueType();

    SDValue FillVal = FillWithZeroes ? DAG.getConstant(0, dl, EltVT) :
      DAG.getUNDEF(EltVT);
    for (unsigned i = 0; i < WidenNumElts - InNumElts; ++i)
      Ops.push_back(FillVal);
    return DAG.getBuildVector(NVT, dl, Ops);
  }
  SDValue FillVal = FillWithZeroes ? DAG.getConstant(0, dl, NVT) :
    DAG.getUNDEF(NVT);
  return DAG.getNode(ISD::INSERT_SUBVECTOR, dl, NVT, FillVal,
                     InOp, DAG.getIntPtrConstant(0, dl));
}

static SDValue LowerMSCATTER(SDValue Op, const X86Subtarget &Subtarget,
                             SelectionDAG &DAG) {
  assert(Subtarget.hasAVX512() &&
         "MGATHER/MSCATTER are supported on AVX-512 arch only");

  // X86 scatter kills mask register, so its type should be added to
  // the list of return values.
  // If the "scatter" has 2 return values, it is already handled.
  if (Op.getNode()->getNumValues() == 2)
    return Op;

  MaskedScatterSDNode *N = cast<MaskedScatterSDNode>(Op.getNode());
  SDValue Src = N->getValue();
  MVT VT = Src.getSimpleValueType();
  assert(VT.getScalarSizeInBits() >= 32 && "Unsupported scatter op");
  SDLoc dl(Op);

  SDValue NewScatter;
  SDValue Index = N->getIndex();
  SDValue Mask = N->getMask();
  SDValue Chain = N->getChain();
  SDValue BasePtr = N->getBasePtr();
  MVT MemVT = N->getMemoryVT().getSimpleVT();
  MVT IndexVT = Index.getSimpleValueType();
  MVT MaskVT = Mask.getSimpleValueType();

  if (MemVT.getScalarSizeInBits() < VT.getScalarSizeInBits()) {
    // The v2i32 value was promoted to v2i64.
    // Now we "redo" the type legalizer's work and widen the original
    // v2i32 value to v4i32. The original v2i32 is retrieved from v2i64
    // with a shuffle.
    assert((MemVT == MVT::v2i32 && VT == MVT::v2i64) &&
           "Unexpected memory type");
    int ShuffleMask[] = {0, 2, -1, -1};
    Src = DAG.getVectorShuffle(MVT::v4i32, dl, DAG.getBitcast(MVT::v4i32, Src),
                               DAG.getUNDEF(MVT::v4i32), ShuffleMask);
    // Now we have 4 elements instead of 2.
    // Expand the index.
    MVT NewIndexVT = MVT::getVectorVT(IndexVT.getScalarType(), 4);
    Index = ExtendToType(Index, NewIndexVT, DAG);

    // Expand the mask with zeroes
    // Mask may be <2 x i64> or <2 x i1> at this moment
    assert((MaskVT == MVT::v2i1 || MaskVT == MVT::v2i64) &&
           "Unexpected mask type");
    MVT ExtMaskVT = MVT::getVectorVT(MaskVT.getScalarType(), 4);
    Mask = ExtendToType(Mask, ExtMaskVT, DAG, true);
    VT = MVT::v4i32;
  }

  unsigned NumElts = VT.getVectorNumElements();
  if (!Subtarget.hasVLX() && !VT.is512BitVector() &&
      !Index.getSimpleValueType().is512BitVector()) {
    // AVX512F supports only 512-bit vectors. Or data or index should
    // be 512 bit wide. If now the both index and data are 256-bit, but
    // the vector contains 8 elements, we just sign-extend the index
    if (IndexVT == MVT::v8i32)
      // Just extend index
      Index = DAG.getNode(ISD::SIGN_EXTEND, dl, MVT::v8i64, Index);
    else {
      // The minimal number of elts in scatter is 8
      NumElts = 8;
      // Index
      MVT NewIndexVT = MVT::getVectorVT(IndexVT.getScalarType(), NumElts);
      // Use original index here, do not modify the index twice
      Index = ExtendToType(N->getIndex(), NewIndexVT, DAG);
      if (IndexVT.getScalarType() == MVT::i32)
        Index = DAG.getNode(ISD::SIGN_EXTEND, dl, MVT::v8i64, Index);

      // Mask
      // At this point we have promoted mask operand
      assert(MaskVT.getScalarSizeInBits() >= 32 && "unexpected mask type");
      MVT ExtMaskVT = MVT::getVectorVT(MaskVT.getScalarType(), NumElts);
      // Use the original mask here, do not modify the mask twice
      Mask = ExtendToType(N->getMask(), ExtMaskVT, DAG, true);

      // The value that should be stored
      MVT NewVT = MVT::getVectorVT(VT.getScalarType(), NumElts);
      Src = ExtendToType(Src, NewVT, DAG);
    }
  }
  // If the mask is "wide" at this point - truncate it to i1 vector
  MVT BitMaskVT = MVT::getVectorVT(MVT::i1, NumElts);
  Mask = DAG.getNode(ISD::TRUNCATE, dl, BitMaskVT, Mask);

  // The mask is killed by scatter, add it to the values
  SDVTList VTs = DAG.getVTList(BitMaskVT, MVT::Other);
  SDValue Ops[] = {Chain, Src, Mask, BasePtr, Index};
  NewScatter = DAG.getMaskedScatter(VTs, N->getMemoryVT(), dl, Ops,
                                    N->getMemOperand());
  DAG.ReplaceAllUsesWith(Op, SDValue(NewScatter.getNode(), 1));
  return SDValue(NewScatter.getNode(), 1);
}

static SDValue LowerMLOAD(SDValue Op, const X86Subtarget &Subtarget,
                          SelectionDAG &DAG) {

  MaskedLoadSDNode *N = cast<MaskedLoadSDNode>(Op.getNode());
  MVT VT = Op.getSimpleValueType();
  MVT ScalarVT = VT.getScalarType();
  SDValue Mask = N->getMask();
  SDLoc dl(Op);

  assert((!N->isExpandingLoad() || Subtarget.hasAVX512()) &&
         "Expanding masked load is supported on AVX-512 target only!");

  assert((!N->isExpandingLoad() || ScalarVT.getSizeInBits() >= 32) &&
         "Expanding masked load is supported for 32 and 64-bit types only!");

  // 4x32, 4x64 and 2x64 vectors of non-expanding loads are legal regardless of
  // VLX. These types for exp-loads are handled here.
  if (!N->isExpandingLoad() && VT.getVectorNumElements() <= 4)
    return Op;

  assert(Subtarget.hasAVX512() && !Subtarget.hasVLX() && !VT.is512BitVector() &&
         "Cannot lower masked load op.");

  assert((ScalarVT.getSizeInBits() >= 32 ||
          (Subtarget.hasBWI() &&
              (ScalarVT == MVT::i8 || ScalarVT == MVT::i16))) &&
         "Unsupported masked load op.");

  // This operation is legal for targets with VLX, but without
  // VLX the vector should be widened to 512 bit
  unsigned NumEltsInWideVec = 512 / VT.getScalarSizeInBits();
  MVT WideDataVT = MVT::getVectorVT(ScalarVT, NumEltsInWideVec);
  SDValue Src0 = N->getSrc0();
  Src0 = ExtendToType(Src0, WideDataVT, DAG);

  // Mask element has to be i1.
  MVT MaskEltTy = Mask.getSimpleValueType().getScalarType();
  assert((MaskEltTy == MVT::i1 || VT.getVectorNumElements() <= 4) &&
         "We handle 4x32, 4x64 and 2x64 vectors only in this case");

  MVT WideMaskVT = MVT::getVectorVT(MaskEltTy, NumEltsInWideVec);

  Mask = ExtendToType(Mask, WideMaskVT, DAG, true);
  if (MaskEltTy != MVT::i1)
    Mask = DAG.getNode(ISD::TRUNCATE, dl,
                       MVT::getVectorVT(MVT::i1, NumEltsInWideVec), Mask);
  SDValue NewLoad = DAG.getMaskedLoad(WideDataVT, dl, N->getChain(),
                                      N->getBasePtr(), Mask, Src0,
                                      N->getMemoryVT(), N->getMemOperand(),
                                      N->getExtensionType(),
                                      N->isExpandingLoad());

  SDValue Exract = DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl, VT,
                               NewLoad.getValue(0),
                               DAG.getIntPtrConstant(0, dl));
  SDValue RetOps[] = {Exract, NewLoad.getValue(1)};
  return DAG.getMergeValues(RetOps, dl);
}

static SDValue LowerMSTORE(SDValue Op, const X86Subtarget &Subtarget,
                           SelectionDAG &DAG) {
  MaskedStoreSDNode *N = cast<MaskedStoreSDNode>(Op.getNode());
  SDValue DataToStore = N->getValue();
  MVT VT = DataToStore.getSimpleValueType();
  MVT ScalarVT = VT.getScalarType();
  SDValue Mask = N->getMask();
  SDLoc dl(Op);

  assert((!N->isCompressingStore() || Subtarget.hasAVX512()) &&
         "Expanding masked load is supported on AVX-512 target only!");

  assert((!N->isCompressingStore() || ScalarVT.getSizeInBits() >= 32) &&
         "Expanding masked load is supported for 32 and 64-bit types only!");

  // 4x32 and 2x64 vectors of non-compressing stores are legal regardless to VLX.
  if (!N->isCompressingStore() && VT.getVectorNumElements() <= 4)
    return Op;

  assert(Subtarget.hasAVX512() && !Subtarget.hasVLX() && !VT.is512BitVector() &&
         "Cannot lower masked store op.");

  assert((ScalarVT.getSizeInBits() >= 32 ||
          (Subtarget.hasBWI() &&
              (ScalarVT == MVT::i8 || ScalarVT == MVT::i16))) &&
          "Unsupported masked store op.");

  // This operation is legal for targets with VLX, but without
  // VLX the vector should be widened to 512 bit
  unsigned NumEltsInWideVec = 512/VT.getScalarSizeInBits();
  MVT WideDataVT = MVT::getVectorVT(ScalarVT, NumEltsInWideVec);

  // Mask element has to be i1.
  MVT MaskEltTy = Mask.getSimpleValueType().getScalarType();
  assert((MaskEltTy == MVT::i1 || VT.getVectorNumElements() <= 4) &&
         "We handle 4x32, 4x64 and 2x64 vectors only in this case");

  MVT WideMaskVT = MVT::getVectorVT(MaskEltTy, NumEltsInWideVec);

  DataToStore = ExtendToType(DataToStore, WideDataVT, DAG);
  Mask = ExtendToType(Mask, WideMaskVT, DAG, true);
  if (MaskEltTy != MVT::i1)
    Mask = DAG.getNode(ISD::TRUNCATE, dl,
                       MVT::getVectorVT(MVT::i1, NumEltsInWideVec), Mask);
  return DAG.getMaskedStore(N->getChain(), dl, DataToStore, N->getBasePtr(),
                            Mask, N->getMemoryVT(), N->getMemOperand(),
                            N->isTruncatingStore(), N->isCompressingStore());
}

static SDValue LowerMGATHER(SDValue Op, const X86Subtarget &Subtarget,
                            SelectionDAG &DAG) {
  assert(Subtarget.hasAVX512() &&
         "MGATHER/MSCATTER are supported on AVX-512 arch only");

  MaskedGatherSDNode *N = cast<MaskedGatherSDNode>(Op.getNode());
  SDLoc dl(Op);
  MVT VT = Op.getSimpleValueType();
  SDValue Index = N->getIndex();
  SDValue Mask = N->getMask();
  SDValue Src0 = N->getValue();
  MVT IndexVT = Index.getSimpleValueType();
  MVT MaskVT = Mask.getSimpleValueType();

  unsigned NumElts = VT.getVectorNumElements();
  assert(VT.getScalarSizeInBits() >= 32 && "Unsupported gather op");

  if (!Subtarget.hasVLX() && !VT.is512BitVector() &&
      !Index.getSimpleValueType().is512BitVector()) {
    // AVX512F supports only 512-bit vectors. Or data or index should
    // be 512 bit wide. If now the both index and data are 256-bit, but
    // the vector contains 8 elements, we just sign-extend the index
    if (NumElts == 8) {
      Index = DAG.getNode(ISD::SIGN_EXTEND, dl, MVT::v8i64, Index);
      SDValue Ops[] = { N->getOperand(0), N->getOperand(1),  N->getOperand(2),
                        N->getOperand(3), Index };
      DAG.UpdateNodeOperands(N, Ops);
      return Op;
    }

    // Minimal number of elements in Gather
    NumElts = 8;
    // Index
    MVT NewIndexVT = MVT::getVectorVT(IndexVT.getScalarType(), NumElts);
    Index = ExtendToType(Index, NewIndexVT, DAG);
    if (IndexVT.getScalarType() == MVT::i32)
      Index = DAG.getNode(ISD::SIGN_EXTEND, dl, MVT::v8i64, Index);

    // Mask
    MVT MaskBitVT = MVT::getVectorVT(MVT::i1, NumElts);
    // At this point we have promoted mask operand
    assert(MaskVT.getScalarSizeInBits() >= 32 && "unexpected mask type");
    MVT ExtMaskVT = MVT::getVectorVT(MaskVT.getScalarType(), NumElts);
    Mask = ExtendToType(Mask, ExtMaskVT, DAG, true);
    Mask = DAG.getNode(ISD::TRUNCATE, dl, MaskBitVT, Mask);

    // The pass-through value
    MVT NewVT = MVT::getVectorVT(VT.getScalarType(), NumElts);
    Src0 = ExtendToType(Src0, NewVT, DAG);

    SDValue Ops[] = { N->getChain(), Src0, Mask, N->getBasePtr(), Index };
    SDValue NewGather = DAG.getMaskedGather(DAG.getVTList(NewVT, MVT::Other),
                                            N->getMemoryVT(), dl, Ops,
                                            N->getMemOperand());
    SDValue Exract = DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl, VT,
                                 NewGather.getValue(0),
                                 DAG.getIntPtrConstant(0, dl));
    SDValue RetOps[] = {Exract, NewGather.getValue(1)};
    return DAG.getMergeValues(RetOps, dl);
  }
  if (N->getMemoryVT() == MVT::v2i32 && Subtarget.hasVLX()) {
    // There is a special case when the return type is v2i32 is illegal and
    // the type legaizer extended it to v2i64. Without this conversion we end up
    // with VPGATHERQQ (reading q-words from the memory) instead of VPGATHERQD.
    // In order to avoid this situation, we'll build an X86 specific Gather node
    // with index v2i64 and value type v4i32.
    assert(VT == MVT::v2i64 && Src0.getValueType() == MVT::v2i64 &&
           "Unexpected type in masked gather");
    Src0 = DAG.getVectorShuffle(MVT::v4i32, dl,
                                DAG.getBitcast(MVT::v4i32, Src0),
                                DAG.getUNDEF(MVT::v4i32), { 0, 2, -1, -1 });
    // The mask should match the destination type. Extending mask with zeroes
    // is not necessary since instruction itself reads only two values from
    // memory.
    Mask = ExtendToType(Mask, MVT::v4i1, DAG, false);
    SDValue Ops[] = { N->getChain(), Src0, Mask, N->getBasePtr(), Index };
    SDValue NewGather = DAG.getTargetMemSDNode<X86MaskedGatherSDNode>(
      DAG.getVTList(MVT::v4i32, MVT::Other), Ops, dl, N->getMemoryVT(),
      N->getMemOperand());

    SDValue Sext = getExtendInVec(X86ISD::VSEXT, dl, MVT::v2i64,
                                  NewGather.getValue(0), DAG);
    SDValue RetOps[] = { Sext, NewGather.getValue(1) };
    return DAG.getMergeValues(RetOps, dl);
  }
  if (N->getMemoryVT() == MVT::v2f32 && Subtarget.hasVLX()) {
    // This transformation is for optimization only.
    // The type legalizer extended mask and index to 4 elements vector
    // in order to match requirements of the common gather node - same
    // vector width of index and value. X86 Gather node allows mismatch
    // of vector width in order to select more optimal instruction at the
    // end.
    assert(VT == MVT::v4f32 && Src0.getValueType() == MVT::v4f32 &&
           "Unexpected type in masked gather");
    if (Mask.getOpcode() == ISD::CONCAT_VECTORS &&
        ISD::isBuildVectorAllZeros(Mask.getOperand(1).getNode()) &&
        Index.getOpcode() == ISD::CONCAT_VECTORS &&
        Index.getOperand(1).isUndef()) {
      Mask = ExtendToType(Mask.getOperand(0), MVT::v4i1, DAG, false);
      Index = Index.getOperand(0);
    } else
      return Op;
    SDValue Ops[] = { N->getChain(), Src0, Mask, N->getBasePtr(), Index };
    SDValue NewGather = DAG.getTargetMemSDNode<X86MaskedGatherSDNode>(
      DAG.getVTList(MVT::v4f32, MVT::Other), Ops, dl, N->getMemoryVT(),
      N->getMemOperand());

    SDValue RetOps[] = { NewGather.getValue(0), NewGather.getValue(1) };
    return DAG.getMergeValues(RetOps, dl);

  }
  return Op;
}

SDValue X86TargetLowering::LowerGC_TRANSITION_START(SDValue Op,
                                                    SelectionDAG &DAG) const {
  // TODO: Eventually, the lowering of these nodes should be informed by or
  // deferred to the GC strategy for the function in which they appear. For
  // now, however, they must be lowered to something. Since they are logically
  // no-ops in the case of a null GC strategy (or a GC strategy which does not
  // require special handling for these nodes), lower them as literal NOOPs for
  // the time being.
  SmallVector<SDValue, 2> Ops;

  Ops.push_back(Op.getOperand(0));
  if (Op->getGluedNode())
    Ops.push_back(Op->getOperand(Op->getNumOperands() - 1));

  SDLoc OpDL(Op);
  SDVTList VTs = DAG.getVTList(MVT::Other, MVT::Glue);
  SDValue NOOP(DAG.getMachineNode(X86::NOOP, SDLoc(Op), VTs, Ops), 0);

  return NOOP;
}

SDValue X86TargetLowering::LowerGC_TRANSITION_END(SDValue Op,
                                                  SelectionDAG &DAG) const {
  // TODO: Eventually, the lowering of these nodes should be informed by or
  // deferred to the GC strategy for the function in which they appear. For
  // now, however, they must be lowered to something. Since they are logically
  // no-ops in the case of a null GC strategy (or a GC strategy which does not
  // require special handling for these nodes), lower them as literal NOOPs for
  // the time being.
  SmallVector<SDValue, 2> Ops;

  Ops.push_back(Op.getOperand(0));
  if (Op->getGluedNode())
    Ops.push_back(Op->getOperand(Op->getNumOperands() - 1));

  SDLoc OpDL(Op);
  SDVTList VTs = DAG.getVTList(MVT::Other, MVT::Glue);
  SDValue NOOP(DAG.getMachineNode(X86::NOOP, SDLoc(Op), VTs, Ops), 0);

  return NOOP;
}

/// Provide custom lowering hooks for some operations.
SDValue X86TargetLowering::LowerOperation(SDValue Op, SelectionDAG &DAG) const {
  switch (Op.getOpcode()) {
  default: llvm_unreachable("Should not custom lower this!");
  case ISD::ATOMIC_FENCE:       return LowerATOMIC_FENCE(Op, Subtarget, DAG);
  case ISD::ATOMIC_CMP_SWAP_WITH_SUCCESS:
    return LowerCMP_SWAP(Op, Subtarget, DAG);
  case ISD::CTPOP:              return LowerCTPOP(Op, Subtarget, DAG);
  case ISD::ATOMIC_LOAD_ADD:
  case ISD::ATOMIC_LOAD_SUB:
  case ISD::ATOMIC_LOAD_OR:
  case ISD::ATOMIC_LOAD_XOR:
  case ISD::ATOMIC_LOAD_AND:    return lowerAtomicArith(Op, DAG, Subtarget);
  case ISD::ATOMIC_STORE:       return LowerATOMIC_STORE(Op, DAG);
  case ISD::BITREVERSE:         return LowerBITREVERSE(Op, Subtarget, DAG);
  case ISD::BUILD_VECTOR:       return LowerBUILD_VECTOR(Op, DAG);
  case ISD::CONCAT_VECTORS:     return LowerCONCAT_VECTORS(Op, Subtarget, DAG);
  case ISD::VECTOR_SHUFFLE:     return lowerVectorShuffle(Op, Subtarget, DAG);
  case ISD::VSELECT:            return LowerVSELECT(Op, DAG);
  case ISD::EXTRACT_VECTOR_ELT: return LowerEXTRACT_VECTOR_ELT(Op, DAG);
  case ISD::INSERT_VECTOR_ELT:  return LowerINSERT_VECTOR_ELT(Op, DAG);
  case ISD::INSERT_SUBVECTOR:   return LowerINSERT_SUBVECTOR(Op, Subtarget,DAG);
  case ISD::SCALAR_TO_VECTOR:   return LowerSCALAR_TO_VECTOR(Op, Subtarget,DAG);
  case ISD::ConstantPool:       return LowerConstantPool(Op, DAG);
  case ISD::GlobalAddress:      return LowerGlobalAddress(Op, DAG);
  case ISD::GlobalTLSAddress:   return LowerGlobalTLSAddress(Op, DAG);
  case ISD::ExternalSymbol:     return LowerExternalSymbol(Op, DAG);
  case ISD::BlockAddress:       return LowerBlockAddress(Op, DAG);
  case ISD::SHL_PARTS:
  case ISD::SRA_PARTS:
  case ISD::SRL_PARTS:          return LowerShiftParts(Op, DAG);
  case ISD::SINT_TO_FP:         return LowerSINT_TO_FP(Op, DAG);
  case ISD::UINT_TO_FP:         return LowerUINT_TO_FP(Op, DAG);
  case ISD::TRUNCATE:           return LowerTRUNCATE(Op, DAG);
  case ISD::ZERO_EXTEND:        return LowerZERO_EXTEND(Op, Subtarget, DAG);
  case ISD::SIGN_EXTEND:        return LowerSIGN_EXTEND(Op, Subtarget, DAG);
  case ISD::ANY_EXTEND:         return LowerANY_EXTEND(Op, Subtarget, DAG);
  case ISD::ZERO_EXTEND_VECTOR_INREG:
  case ISD::SIGN_EXTEND_VECTOR_INREG:
    return LowerEXTEND_VECTOR_INREG(Op, Subtarget, DAG);
  case ISD::FP_TO_SINT:
  case ISD::FP_TO_UINT:         return LowerFP_TO_INT(Op, DAG);
  case ISD::FP_EXTEND:          return LowerFP_EXTEND(Op, DAG);
  case ISD::LOAD:               return LowerExtendedLoad(Op, Subtarget, DAG);
  case ISD::FABS:
  case ISD::FNEG:               return LowerFABSorFNEG(Op, DAG);
  case ISD::FCOPYSIGN:          return LowerFCOPYSIGN(Op, DAG);
  case ISD::FGETSIGN:           return LowerFGETSIGN(Op, DAG);
  case ISD::SETCC:              return LowerSETCC(Op, DAG);
  case ISD::SETCCCARRY:         return LowerSETCCCARRY(Op, DAG);
  case ISD::SELECT:             return LowerSELECT(Op, DAG);
  case ISD::BRCOND:             return LowerBRCOND(Op, DAG);
  case ISD::JumpTable:          return LowerJumpTable(Op, DAG);
  case ISD::VASTART:            return LowerVASTART(Op, DAG);
  case ISD::VAARG:              return LowerVAARG(Op, DAG);
  case ISD::VACOPY:             return LowerVACOPY(Op, Subtarget, DAG);
  case ISD::INTRINSIC_WO_CHAIN: return LowerINTRINSIC_WO_CHAIN(Op, DAG);
  case ISD::INTRINSIC_VOID:
  case ISD::INTRINSIC_W_CHAIN:  return LowerINTRINSIC_W_CHAIN(Op, Subtarget, DAG);
  case ISD::RETURNADDR:         return LowerRETURNADDR(Op, DAG);
  case ISD::ADDROFRETURNADDR:   return LowerADDROFRETURNADDR(Op, DAG);
  case ISD::FRAMEADDR:          return LowerFRAMEADDR(Op, DAG);
  case ISD::FRAME_TO_ARGS_OFFSET:
                                return LowerFRAME_TO_ARGS_OFFSET(Op, DAG);
  case ISD::DYNAMIC_STACKALLOC: return LowerDYNAMIC_STACKALLOC(Op, DAG);
  case ISD::EH_RETURN:          return LowerEH_RETURN(Op, DAG);
  case ISD::EH_SJLJ_SETJMP:     return lowerEH_SJLJ_SETJMP(Op, DAG);
  case ISD::EH_SJLJ_LONGJMP:    return lowerEH_SJLJ_LONGJMP(Op, DAG);
  case ISD::EH_SJLJ_SETUP_DISPATCH:
    return lowerEH_SJLJ_SETUP_DISPATCH(Op, DAG);
  case ISD::INIT_TRAMPOLINE:    return LowerINIT_TRAMPOLINE(Op, DAG);
  case ISD::ADJUST_TRAMPOLINE:  return LowerADJUST_TRAMPOLINE(Op, DAG);
  case ISD::FLT_ROUNDS_:        return LowerFLT_ROUNDS_(Op, DAG);
  case ISD::CTLZ:
  case ISD::CTLZ_ZERO_UNDEF:    return LowerCTLZ(Op, Subtarget, DAG);
  case ISD::CTTZ:
  case ISD::CTTZ_ZERO_UNDEF:    return LowerCTTZ(Op, DAG);
  case ISD::MUL:                return LowerMUL(Op, Subtarget, DAG);
  case ISD::MULHS:
  case ISD::MULHU:              return LowerMULH(Op, Subtarget, DAG);
  case ISD::UMUL_LOHI:
  case ISD::SMUL_LOHI:          return LowerMUL_LOHI(Op, Subtarget, DAG);
  case ISD::ROTL:
  case ISD::ROTR:               return LowerRotate(Op, Subtarget, DAG);
  case ISD::SRA:
  case ISD::SRL:
  case ISD::SHL:                return LowerShift(Op, Subtarget, DAG);
  case ISD::SADDO:
  case ISD::UADDO:
  case ISD::SSUBO:
  case ISD::USUBO:
  case ISD::SMULO:
  case ISD::UMULO:              return LowerXALUO(Op, DAG);
  case ISD::READCYCLECOUNTER:   return LowerREADCYCLECOUNTER(Op, Subtarget,DAG);
  case ISD::BITCAST:            return LowerBITCAST(Op, Subtarget, DAG);
  case ISD::ADDCARRY:
  case ISD::SUBCARRY:           return LowerADDSUBCARRY(Op, DAG);
  case ISD::ADD:
  case ISD::SUB:                return LowerADD_SUB(Op, DAG);
  case ISD::SMAX:
  case ISD::SMIN:
  case ISD::UMAX:
  case ISD::UMIN:               return LowerMINMAX(Op, DAG);
  case ISD::ABS:                return LowerABS(Op, DAG);
  case ISD::FSINCOS:            return LowerFSINCOS(Op, Subtarget, DAG);
  case ISD::MLOAD:              return LowerMLOAD(Op, Subtarget, DAG);
  case ISD::MSTORE:             return LowerMSTORE(Op, Subtarget, DAG);
  case ISD::MGATHER:            return LowerMGATHER(Op, Subtarget, DAG);
  case ISD::MSCATTER:           return LowerMSCATTER(Op, Subtarget, DAG);
  case ISD::GC_TRANSITION_START:
                                return LowerGC_TRANSITION_START(Op, DAG);
  case ISD::GC_TRANSITION_END:  return LowerGC_TRANSITION_END(Op, DAG);
  case ISD::STORE:              return LowerTruncatingStore(Op, Subtarget, DAG);
  }
}

/// Places new result values for the node in Results (their number
/// and types must exactly match those of the original return values of
/// the node), or leaves Results empty, which indicates that the node is not
/// to be custom lowered after all.
void X86TargetLowering::LowerOperationWrapper(SDNode *N,
                                              SmallVectorImpl<SDValue> &Results,
                                              SelectionDAG &DAG) const {
  SDValue Res = LowerOperation(SDValue(N, 0), DAG);

  if (!Res.getNode())
    return;

  assert((N->getNumValues() <= Res->getNumValues()) &&
      "Lowering returned the wrong number of results!");

  // Places new result values base on N result number.
  // In some cases (LowerSINT_TO_FP for example) Res has more result values
  // than original node, chain should be dropped(last value).
  for (unsigned I = 0, E = N->getNumValues(); I != E; ++I)
    Results.push_back(Res.getValue(I));
}

/// Replace a node with an illegal result type with a new node built out of
/// custom code.
void X86TargetLowering::ReplaceNodeResults(SDNode *N,
                                           SmallVectorImpl<SDValue>&Results,
                                           SelectionDAG &DAG) const {
  SDLoc dl(N);
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  switch (N->getOpcode()) {
  default:
    llvm_unreachable("Do not know how to custom type legalize this operation!");
  case X86ISD::AVG: {
    // Legalize types for X86ISD::AVG by expanding vectors.
    assert(Subtarget.hasSSE2() && "Requires at least SSE2!");

    auto InVT = N->getValueType(0);
    auto InVTSize = InVT.getSizeInBits();
    const unsigned RegSize =
        (InVTSize > 128) ? ((InVTSize > 256) ? 512 : 256) : 128;
    assert((Subtarget.hasBWI() || RegSize < 512) &&
           "512-bit vector requires AVX512BW");
    assert((Subtarget.hasAVX2() || RegSize < 256) &&
           "256-bit vector requires AVX2");

    auto ElemVT = InVT.getVectorElementType();
    auto RegVT = EVT::getVectorVT(*DAG.getContext(), ElemVT,
                                  RegSize / ElemVT.getSizeInBits());
    assert(RegSize % InVT.getSizeInBits() == 0);
    unsigned NumConcat = RegSize / InVT.getSizeInBits();

    SmallVector<SDValue, 16> Ops(NumConcat, DAG.getUNDEF(InVT));
    Ops[0] = N->getOperand(0);
    SDValue InVec0 = DAG.getNode(ISD::CONCAT_VECTORS, dl, RegVT, Ops);
    Ops[0] = N->getOperand(1);
    SDValue InVec1 = DAG.getNode(ISD::CONCAT_VECTORS, dl, RegVT, Ops);

    SDValue Res = DAG.getNode(X86ISD::AVG, dl, RegVT, InVec0, InVec1);
    Results.push_back(DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl, InVT, Res,
                                  DAG.getIntPtrConstant(0, dl)));
    return;
  }
  // We might have generated v2f32 FMIN/FMAX operations. Widen them to v4f32.
  case X86ISD::FMINC:
  case X86ISD::FMIN:
  case X86ISD::FMAXC:
  case X86ISD::FMAX: {
    EVT VT = N->getValueType(0);
    assert(VT == MVT::v2f32 && "Unexpected type (!= v2f32) on FMIN/FMAX.");
    SDValue UNDEF = DAG.getUNDEF(VT);
    SDValue LHS = DAG.getNode(ISD::CONCAT_VECTORS, dl, MVT::v4f32,
                              N->getOperand(0), UNDEF);
    SDValue RHS = DAG.getNode(ISD::CONCAT_VECTORS, dl, MVT::v4f32,
                              N->getOperand(1), UNDEF);
    Results.push_back(DAG.getNode(N->getOpcode(), dl, MVT::v4f32, LHS, RHS));
    return;
  }
  case ISD::SDIV:
  case ISD::UDIV:
  case ISD::SREM:
  case ISD::UREM:
  case ISD::SDIVREM:
  case ISD::UDIVREM: {
    SDValue V = LowerWin64_i128OP(SDValue(N,0), DAG);
    Results.push_back(V);
    return;
  }
  case ISD::FP_TO_SINT:
  case ISD::FP_TO_UINT: {
    bool IsSigned = N->getOpcode() == ISD::FP_TO_SINT;

    if (N->getValueType(0) == MVT::v2i32) {
      assert((IsSigned || Subtarget.hasAVX512()) &&
             "Can only handle signed conversion without AVX512");
      assert(Subtarget.hasSSE2() && "Requires at least SSE2!");
      SDValue Src = N->getOperand(0);
      if (Src.getValueType() == MVT::v2f64) {
        SDValue Idx = DAG.getIntPtrConstant(0, dl);
        SDValue Res = DAG.getNode(IsSigned ? X86ISD::CVTTP2SI
                                           : X86ISD::CVTTP2UI,
                                  dl, MVT::v4i32, Src);
        Res = DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl, MVT::v2i32, Res, Idx);
        Results.push_back(Res);
        return;
      }
      if (Src.getValueType() == MVT::v2f32) {
        SDValue Idx = DAG.getIntPtrConstant(0, dl);
        SDValue Res = DAG.getNode(ISD::CONCAT_VECTORS, dl, MVT::v4f32, Src,
                                  DAG.getUNDEF(MVT::v2f32));
        Res = DAG.getNode(IsSigned ? ISD::FP_TO_SINT
                                   : ISD::FP_TO_UINT, dl, MVT::v4i32, Res);
        Res = DAG.getNode(ISD::EXTRACT_SUBVECTOR, dl, MVT::v2i32, Res, Idx);
        Results.push_back(Res);
        return;
      }

      // The FP_TO_INTHelper below only handles f32/f64/f80 scalar inputs,
      // so early out here.
      return;
    }

    std::pair<SDValue,SDValue> Vals =
        FP_TO_INTHelper(SDValue(N, 0), DAG, IsSigned, /*IsReplace=*/ true);
    SDValue FIST = Vals.first, StackSlot = Vals.second;
    if (FIST.getNode()) {
      EVT VT = N->getValueType(0);
      // Return a load from the stack slot.
      if (StackSlot.getNode())
        Results.push_back(
            DAG.getLoad(VT, dl, FIST, StackSlot, MachinePointerInfo()));
      else
        Results.push_back(FIST);
    }
    return;
  }
  case ISD::SINT_TO_FP: {
    assert(Subtarget.hasDQI() && Subtarget.hasVLX() && "Requires AVX512DQVL!");
    SDValue Src = N->getOperand(0);
    if (N->getValueType(0) != MVT::v2f32 || Src.getValueType() != MVT::v2i64)
      return;
    Results.push_back(DAG.getNode(X86ISD::CVTSI2P, dl, MVT::v4f32, Src));
    return;
  }
  case ISD::UINT_TO_FP: {
    assert(Subtarget.hasSSE2() && "Requires at least SSE2!");
    EVT VT = N->getValueType(0);
    if (VT != MVT::v2f32)
      return;
    SDValue Src = N->getOperand(0);
    EVT SrcVT = Src.getValueType();
    if (Subtarget.hasDQI() && Subtarget.hasVLX() && SrcVT == MVT::v2i64) {
      Results.push_back(DAG.getNode(X86ISD::CVTUI2P, dl, MVT::v4f32, Src));
      return;
    }
    if (SrcVT != MVT::v2i32)
      return;
    SDValue ZExtIn = DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::v2i64, Src);
    SDValue VBias =
        DAG.getConstantFP(BitsToDouble(0x4330000000000000ULL), dl, MVT::v2f64);
    SDValue Or = DAG.getNode(ISD::OR, dl, MVT::v2i64, ZExtIn,
                             DAG.getBitcast(MVT::v2i64, VBias));
    Or = DAG.getBitcast(MVT::v2f64, Or);
    // TODO: Are there any fast-math-flags to propagate here?
    SDValue Sub = DAG.getNode(ISD::FSUB, dl, MVT::v2f64, Or, VBias);
    Results.push_back(DAG.getNode(X86ISD::VFPROUND, dl, MVT::v4f32, Sub));
    return;
  }
  case ISD::FP_ROUND: {
    if (!TLI.isTypeLegal(N->getOperand(0).getValueType()))
        return;
    SDValue V = DAG.getNode(X86ISD::VFPROUND, dl, MVT::v4f32, N->getOperand(0));
    Results.push_back(V);
    return;
  }
  case ISD::FP_EXTEND: {
    // Right now, only MVT::v2f32 has OperationAction for FP_EXTEND.
    // No other ValueType for FP_EXTEND should reach this point.
    assert(N->getValueType(0) == MVT::v2f32 &&
           "Do not know how to legalize this Node");
    return;
  }
  case ISD::INTRINSIC_W_CHAIN: {
    unsigned IntNo = cast<ConstantSDNode>(N->getOperand(1))->getZExtValue();
    switch (IntNo) {
    default : llvm_unreachable("Do not know how to custom type "
                               "legalize this intrinsic operation!");
    case Intrinsic::x86_rdtsc:
      return getReadTimeStampCounter(N, dl, X86ISD::RDTSC_DAG, DAG, Subtarget,
                                     Results);
    case Intrinsic::x86_rdtscp:
      return getReadTimeStampCounter(N, dl, X86ISD::RDTSCP_DAG, DAG, Subtarget,
                                     Results);
    case Intrinsic::x86_rdpmc:
      return getReadPerformanceCounter(N, dl, DAG, Subtarget, Results);

    case Intrinsic::x86_xgetbv:
      return getExtendedControlRegister(N, dl, DAG, Subtarget, Results);
    }
  }
  case ISD::INTRINSIC_WO_CHAIN: {
    if (SDValue V = LowerINTRINSIC_WO_CHAIN(SDValue(N, 0), DAG))
      Results.push_back(V);
    return;
  }
  case ISD::READCYCLECOUNTER: {
    return getReadTimeStampCounter(N, dl, X86ISD::RDTSC_DAG, DAG, Subtarget,
                                   Results);
  }
  case ISD::ATOMIC_CMP_SWAP_WITH_SUCCESS: {
    EVT T = N->getValueType(0);
    assert((T == MVT::i64 || T == MVT::i128) && "can only expand cmpxchg pair");
    bool Regs64bit = T == MVT::i128;
    MVT HalfT = Regs64bit ? MVT::i64 : MVT::i32;
    SDValue cpInL, cpInH;
    cpInL = DAG.getNode(ISD::EXTRACT_ELEMENT, dl, HalfT, N->getOperand(2),
                        DAG.getConstant(0, dl, HalfT));
    cpInH = DAG.getNode(ISD::EXTRACT_ELEMENT, dl, HalfT, N->getOperand(2),
                        DAG.getConstant(1, dl, HalfT));
    cpInL = DAG.getCopyToReg(N->getOperand(0), dl,
                             Regs64bit ? X86::RAX : X86::EAX,
                             cpInL, SDValue());
    cpInH = DAG.getCopyToReg(cpInL.getValue(0), dl,
                             Regs64bit ? X86::RDX : X86::EDX,
                             cpInH, cpInL.getValue(1));
    SDValue swapInL, swapInH;
    swapInL = DAG.getNode(ISD::EXTRACT_ELEMENT, dl, HalfT, N->getOperand(3),
                          DAG.getConstant(0, dl, HalfT));
    swapInH = DAG.getNode(ISD::EXTRACT_ELEMENT, dl, HalfT, N->getOperand(3),
                          DAG.getConstant(1, dl, HalfT));
    swapInH =
        DAG.getCopyToReg(cpInH.getValue(0), dl, Regs64bit ? X86::RCX : X86::ECX,
                         swapInH, cpInH.getValue(1));
    // If the current function needs the base pointer, RBX,
    // we shouldn't use cmpxchg directly.
    // Indeed the lowering of that instruction will clobber
    // that register and since RBX will be a reserved register
    // the register allocator will not make sure its value will
    // be properly saved and restored around this live-range.
    const X86RegisterInfo *TRI = Subtarget.getRegisterInfo();
    SDValue Result;
    SDVTList Tys = DAG.getVTList(MVT::Other, MVT::Glue);
    unsigned BasePtr = TRI->getBaseRegister();
    MachineMemOperand *MMO = cast<AtomicSDNode>(N)->getMemOperand();
    if (TRI->hasBasePointer(DAG.getMachineFunction()) &&
        (BasePtr == X86::RBX || BasePtr == X86::EBX)) {
      // ISel prefers the LCMPXCHG64 variant.
      // If that assert breaks, that means it is not the case anymore,
      // and we need to teach LCMPXCHG8_SAVE_EBX_DAG how to save RBX,
      // not just EBX. This is a matter of accepting i64 input for that
      // pseudo, and restoring into the register of the right wide
      // in expand pseudo. Everything else should just work.
      assert(((Regs64bit == (BasePtr == X86::RBX)) || BasePtr == X86::EBX) &&
             "Saving only half of the RBX");
      unsigned Opcode = Regs64bit ? X86ISD::LCMPXCHG16_SAVE_RBX_DAG
                                  : X86ISD::LCMPXCHG8_SAVE_EBX_DAG;
      SDValue RBXSave = DAG.getCopyFromReg(swapInH.getValue(0), dl,
                                           Regs64bit ? X86::RBX : X86::EBX,
                                           HalfT, swapInH.getValue(1));
      SDValue Ops[] = {/*Chain*/ RBXSave.getValue(1), N->getOperand(1), swapInL,
                       RBXSave,
                       /*Glue*/ RBXSave.getValue(2)};
      Result = DAG.getMemIntrinsicNode(Opcode, dl, Tys, Ops, T, MMO);
    } else {
      unsigned Opcode =
          Regs64bit ? X86ISD::LCMPXCHG16_DAG : X86ISD::LCMPXCHG8_DAG;
      swapInL = DAG.getCopyToReg(swapInH.getValue(0), dl,
                                 Regs64bit ? X86::RBX : X86::EBX, swapInL,
                                 swapInH.getValue(1));
      SDValue Ops[] = {swapInL.getValue(0), N->getOperand(1),
                       swapInL.getValue(1)};
      Result = DAG.getMemIntrinsicNode(Opcode, dl, Tys, Ops, T, MMO);
    }
    SDValue cpOutL = DAG.getCopyFromReg(Result.getValue(0), dl,
                                        Regs64bit ? X86::RAX : X86::EAX,
                                        HalfT, Result.getValue(1));
    SDValue cpOutH = DAG.getCopyFromReg(cpOutL.getValue(1), dl,
                                        Regs64bit ? X86::RDX : X86::EDX,
                                        HalfT, cpOutL.getValue(2));
    SDValue OpsF[] = { cpOutL.getValue(0), cpOutH.getValue(0)};

    SDValue EFLAGS = DAG.getCopyFromReg(cpOutH.getValue(1), dl, X86::EFLAGS,
                                        MVT::i32, cpOutH.getValue(2));
    SDValue Success = getSETCC(X86::COND_E, EFLAGS, dl, DAG);
    Success = DAG.getZExtOrTrunc(Success, dl, N->getValueType(1));

    Results.push_back(DAG.getNode(ISD::BUILD_PAIR, dl, T, OpsF));
    Results.push_back(Success);
    Results.push_back(EFLAGS.getValue(1));
    return;
  }
  case ISD::ATOMIC_SWAP:
  case ISD::ATOMIC_LOAD_ADD:
  case ISD::ATOMIC_LOAD_SUB:
  case ISD::ATOMIC_LOAD_AND:
  case ISD::ATOMIC_LOAD_OR:
  case ISD::ATOMIC_LOAD_XOR:
  case ISD::ATOMIC_LOAD_NAND:
  case ISD::ATOMIC_LOAD_MIN:
  case ISD::ATOMIC_LOAD_MAX:
  case ISD::ATOMIC_LOAD_UMIN:
  case ISD::ATOMIC_LOAD_UMAX:
  case ISD::ATOMIC_LOAD: {
    // Delegate to generic TypeLegalization. Situations we can really handle
    // should have already been dealt with by AtomicExpandPass.cpp.
    break;
  }
  case ISD::BITCAST: {
    assert(Subtarget.hasSSE2() && "Requires at least SSE2!");
    EVT DstVT = N->getValueType(0);
    EVT SrcVT = N->getOperand(0)->getValueType(0);

    if (SrcVT != MVT::f64 ||
        (DstVT != MVT::v2i32 && DstVT != MVT::v4i16 && DstVT != MVT::v8i8))
      return;

    unsigned NumElts = DstVT.getVectorNumElements();
    EVT SVT = DstVT.getVectorElementType();
    EVT WiderVT = EVT::getVectorVT(*DAG.getContext(), SVT, NumElts * 2);
    SDValue Expanded = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl,
                                   MVT::v2f64, N->getOperand(0));
    SDValue ToVecInt = DAG.getBitcast(WiderVT, Expanded);

    if (ExperimentalVectorWideningLegalization) {
      // If we are legalizing vectors by widening, we already have the desired
      // legal vector type, just return it.
      Results.push_back(ToVecInt);
      return;
    }

    SmallVector<SDValue, 8> Elts;
    for (unsigned i = 0, e = NumElts; i != e; ++i)
      Elts.push_back(DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, SVT,
                                   ToVecInt, DAG.getIntPtrConstant(i, dl)));

    Results.push_back(DAG.getBuildVector(DstVT, dl, Elts));
  }
  }
}

const char *X86TargetLowering::getTargetNodeName(unsigned Opcode) const {
  switch ((X86ISD::NodeType)Opcode) {
  case X86ISD::FIRST_NUMBER:       break;
  case X86ISD::BSF:                return "X86ISD::BSF";
  case X86ISD::BSR:                return "X86ISD::BSR";
  case X86ISD::SHLD:               return "X86ISD::SHLD";
  case X86ISD::SHRD:               return "X86ISD::SHRD";
  case X86ISD::FAND:               return "X86ISD::FAND";
  case X86ISD::FANDN:              return "X86ISD::FANDN";
  case X86ISD::FOR:                return "X86ISD::FOR";
  case X86ISD::FXOR:               return "X86ISD::FXOR";
  case X86ISD::FILD:               return "X86ISD::FILD";
  case X86ISD::FILD_FLAG:          return "X86ISD::FILD_FLAG";
  case X86ISD::FP_TO_INT16_IN_MEM: return "X86ISD::FP_TO_INT16_IN_MEM";
  case X86ISD::FP_TO_INT32_IN_MEM: return "X86ISD::FP_TO_INT32_IN_MEM";
  case X86ISD::FP_TO_INT64_IN_MEM: return "X86ISD::FP_TO_INT64_IN_MEM";
  case X86ISD::FLD:                return "X86ISD::FLD";
  case X86ISD::FST:                return "X86ISD::FST";
  case X86ISD::CALL:               return "X86ISD::CALL";
  case X86ISD::RDTSC_DAG:          return "X86ISD::RDTSC_DAG";
  case X86ISD::RDTSCP_DAG:         return "X86ISD::RDTSCP_DAG";
  case X86ISD::RDPMC_DAG:          return "X86ISD::RDPMC_DAG";
  case X86ISD::BT:                 return "X86ISD::BT";
  case X86ISD::CMP:                return "X86ISD::CMP";
  case X86ISD::COMI:               return "X86ISD::COMI";
  case X86ISD::UCOMI:              return "X86ISD::UCOMI";
  case X86ISD::CMPM:               return "X86ISD::CMPM";
  case X86ISD::CMPMU:              return "X86ISD::CMPMU";
  case X86ISD::CMPM_RND:           return "X86ISD::CMPM_RND";
  case X86ISD::SETCC:              return "X86ISD::SETCC";
  case X86ISD::SETCC_CARRY:        return "X86ISD::SETCC_CARRY";
  case X86ISD::FSETCC:             return "X86ISD::FSETCC";
  case X86ISD::FSETCCM:            return "X86ISD::FSETCCM";
  case X86ISD::FSETCCM_RND:        return "X86ISD::FSETCCM_RND";
  case X86ISD::CMOV:               return "X86ISD::CMOV";
  case X86ISD::BRCOND:             return "X86ISD::BRCOND";
  case X86ISD::RET_FLAG:           return "X86ISD::RET_FLAG";
  case X86ISD::IRET:               return "X86ISD::IRET";
  case X86ISD::REP_STOS:           return "X86ISD::REP_STOS";
  case X86ISD::REP_MOVS:           return "X86ISD::REP_MOVS";
  case X86ISD::GlobalBaseReg:      return "X86ISD::GlobalBaseReg";
  case X86ISD::Wrapper:            return "X86ISD::Wrapper";
  case X86ISD::WrapperRIP:         return "X86ISD::WrapperRIP";
  case X86ISD::MOVDQ2Q:            return "X86ISD::MOVDQ2Q";
  case X86ISD::MMX_MOVD2W:         return "X86ISD::MMX_MOVD2W";
  case X86ISD::MMX_MOVW2D:         return "X86ISD::MMX_MOVW2D";
  case X86ISD::PEXTRB:             return "X86ISD::PEXTRB";
  case X86ISD::PEXTRW:             return "X86ISD::PEXTRW";
  case X86ISD::INSERTPS:           return "X86ISD::INSERTPS";
  case X86ISD::PINSRB:             return "X86ISD::PINSRB";
  case X86ISD::PINSRW:             return "X86ISD::PINSRW";
  case X86ISD::PSHUFB:             return "X86ISD::PSHUFB";
  case X86ISD::ANDNP:              return "X86ISD::ANDNP";
  case X86ISD::BLENDI:             return "X86ISD::BLENDI";
  case X86ISD::SHRUNKBLEND:        return "X86ISD::SHRUNKBLEND";
  case X86ISD::ADDUS:              return "X86ISD::ADDUS";
  case X86ISD::SUBUS:              return "X86ISD::SUBUS";
  case X86ISD::HADD:               return "X86ISD::HADD";
  case X86ISD::HSUB:               return "X86ISD::HSUB";
  case X86ISD::FHADD:              return "X86ISD::FHADD";
  case X86ISD::FHSUB:              return "X86ISD::FHSUB";
  case X86ISD::CONFLICT:           return "X86ISD::CONFLICT";
  case X86ISD::FMAX:               return "X86ISD::FMAX";
  case X86ISD::FMAXS:              return "X86ISD::FMAXS";
  case X86ISD::FMAX_RND:           return "X86ISD::FMAX_RND";
  case X86ISD::FMAXS_RND:          return "X86ISD::FMAX_RND";
  case X86ISD::FMIN:               return "X86ISD::FMIN";
  case X86ISD::FMINS:              return "X86ISD::FMINS";
  case X86ISD::FMIN_RND:           return "X86ISD::FMIN_RND";
  case X86ISD::FMINS_RND:          return "X86ISD::FMINS_RND";
  case X86ISD::FMAXC:              return "X86ISD::FMAXC";
  case X86ISD::FMINC:              return "X86ISD::FMINC";
  case X86ISD::FRSQRT:             return "X86ISD::FRSQRT";
  case X86ISD::FRCP:               return "X86ISD::FRCP";
  case X86ISD::EXTRQI:             return "X86ISD::EXTRQI";
  case X86ISD::INSERTQI:           return "X86ISD::INSERTQI";
  case X86ISD::TLSADDR:            return "X86ISD::TLSADDR";
  case X86ISD::TLSBASEADDR:        return "X86ISD::TLSBASEADDR";
  case X86ISD::TLSCALL:            return "X86ISD::TLSCALL";
  case X86ISD::EH_SJLJ_SETJMP:     return "X86ISD::EH_SJLJ_SETJMP";
  case X86ISD::EH_SJLJ_LONGJMP:    return "X86ISD::EH_SJLJ_LONGJMP";
  case X86ISD::EH_SJLJ_SETUP_DISPATCH:
    return "X86ISD::EH_SJLJ_SETUP_DISPATCH";
  case X86ISD::EH_RETURN:          return "X86ISD::EH_RETURN";
  case X86ISD::TC_RETURN:          return "X86ISD::TC_RETURN";
  case X86ISD::FNSTCW16m:          return "X86ISD::FNSTCW16m";
  case X86ISD::FNSTSW16r:          return "X86ISD::FNSTSW16r";
  case X86ISD::LCMPXCHG_DAG:       return "X86ISD::LCMPXCHG_DAG";
  case X86ISD::LCMPXCHG8_DAG:      return "X86ISD::LCMPXCHG8_DAG";
  case X86ISD::LCMPXCHG16_DAG:     return "X86ISD::LCMPXCHG16_DAG";
  case X86ISD::LCMPXCHG8_SAVE_EBX_DAG:
    return "X86ISD::LCMPXCHG8_SAVE_EBX_DAG";
  case X86ISD::LCMPXCHG16_SAVE_RBX_DAG:
    return "X86ISD::LCMPXCHG16_SAVE_RBX_DAG";
  case X86ISD::LADD:               return "X86ISD::LADD";
  case X86ISD::LSUB:               return "X86ISD::LSUB";
  case X86ISD::LOR:                return "X86ISD::LOR";
  case X86ISD::LXOR:               return "X86ISD::LXOR";
  case X86ISD::LAND:               return "X86ISD::LAND";
  case X86ISD::LINC:               return "X86ISD::LINC";
  case X86ISD::LDEC:               return "X86ISD::LDEC";
  case X86ISD::VZEXT_MOVL:         return "X86ISD::VZEXT_MOVL";
  case X86ISD::VZEXT_LOAD:         return "X86ISD::VZEXT_LOAD";
  case X86ISD::VZEXT:              return "X86ISD::VZEXT";
  case X86ISD::VSEXT:              return "X86ISD::VSEXT";
  case X86ISD::VTRUNC:             return "X86ISD::VTRUNC";
  case X86ISD::VTRUNCS:            return "X86ISD::VTRUNCS";
  case X86ISD::VTRUNCUS:           return "X86ISD::VTRUNCUS";
  case X86ISD::VTRUNCSTORES:       return "X86ISD::VTRUNCSTORES";
  case X86ISD::VTRUNCSTOREUS:      return "X86ISD::VTRUNCSTOREUS";
  case X86ISD::VMTRUNCSTORES:      return "X86ISD::VMTRUNCSTORES";
  case X86ISD::VMTRUNCSTOREUS:     return "X86ISD::VMTRUNCSTOREUS";
  case X86ISD::VFPEXT:             return "X86ISD::VFPEXT";
  case X86ISD::VFPEXT_RND:         return "X86ISD::VFPEXT_RND";
  case X86ISD::VFPEXTS_RND:        return "X86ISD::VFPEXTS_RND";
  case X86ISD::VFPROUND:           return "X86ISD::VFPROUND";
  case X86ISD::VFPROUND_RND:       return "X86ISD::VFPROUND_RND";
  case X86ISD::VFPROUNDS_RND:      return "X86ISD::VFPROUNDS_RND";
  case X86ISD::CVT2MASK:           return "X86ISD::CVT2MASK";
  case X86ISD::VSHLDQ:             return "X86ISD::VSHLDQ";
  case X86ISD::VSRLDQ:             return "X86ISD::VSRLDQ";
  case X86ISD::VSHL:               return "X86ISD::VSHL";
  case X86ISD::VSRL:               return "X86ISD::VSRL";
  case X86ISD::VSRA:               return "X86ISD::VSRA";
  case X86ISD::VSHLI:              return "X86ISD::VSHLI";
  case X86ISD::VSRLI:              return "X86ISD::VSRLI";
  case X86ISD::VSRAI:              return "X86ISD::VSRAI";
  case X86ISD::VSRAV:              return "X86ISD::VSRAV";
  case X86ISD::VROTLI:             return "X86ISD::VROTLI";
  case X86ISD::VROTRI:             return "X86ISD::VROTRI";
  case X86ISD::VPPERM:             return "X86ISD::VPPERM";
  case X86ISD::CMPP:               return "X86ISD::CMPP";
  case X86ISD::PCMPEQ:             return "X86ISD::PCMPEQ";
  case X86ISD::PCMPGT:             return "X86ISD::PCMPGT";
  case X86ISD::PCMPEQM:            return "X86ISD::PCMPEQM";
  case X86ISD::PCMPGTM:            return "X86ISD::PCMPGTM";
  case X86ISD::ADD:                return "X86ISD::ADD";
  case X86ISD::SUB:                return "X86ISD::SUB";
  case X86ISD::ADC:                return "X86ISD::ADC";
  case X86ISD::SBB:                return "X86ISD::SBB";
  case X86ISD::SMUL:               return "X86ISD::SMUL";
  case X86ISD::UMUL:               return "X86ISD::UMUL";
  case X86ISD::SMUL8:              return "X86ISD::SMUL8";
  case X86ISD::UMUL8:              return "X86ISD::UMUL8";
  case X86ISD::SDIVREM8_SEXT_HREG: return "X86ISD::SDIVREM8_SEXT_HREG";
  case X86ISD::UDIVREM8_ZEXT_HREG: return "X86ISD::UDIVREM8_ZEXT_HREG";
  case X86ISD::INC:                return "X86ISD::INC";
  case X86ISD::DEC:                return "X86ISD::DEC";
  case X86ISD::OR:                 return "X86ISD::OR";
  case X86ISD::XOR:                return "X86ISD::XOR";
  case X86ISD::AND:                return "X86ISD::AND";
  case X86ISD::MUL_IMM:            return "X86ISD::MUL_IMM";
  case X86ISD::MOVMSK:             return "X86ISD::MOVMSK";
  case X86ISD::PTEST:              return "X86ISD::PTEST";
  case X86ISD::TESTP:              return "X86ISD::TESTP";
  case X86ISD::TESTM:              return "X86ISD::TESTM";
  case X86ISD::TESTNM:             return "X86ISD::TESTNM";
  case X86ISD::KORTEST:            return "X86ISD::KORTEST";
  case X86ISD::KTEST:              return "X86ISD::KTEST";
  case X86ISD::KSHIFTL:            return "X86ISD::KSHIFTL";
  case X86ISD::KSHIFTR:            return "X86ISD::KSHIFTR";
  case X86ISD::PACKSS:             return "X86ISD::PACKSS";
  case X86ISD::PACKUS:             return "X86ISD::PACKUS";
  case X86ISD::PALIGNR:            return "X86ISD::PALIGNR";
  case X86ISD::VALIGN:             return "X86ISD::VALIGN";
  case X86ISD::PSHUFD:             return "X86ISD::PSHUFD";
  case X86ISD::PSHUFHW:            return "X86ISD::PSHUFHW";
  case X86ISD::PSHUFLW:            return "X86ISD::PSHUFLW";
  case X86ISD::SHUFP:              return "X86ISD::SHUFP";
  case X86ISD::SHUF128:            return "X86ISD::SHUF128";
  case X86ISD::MOVLHPS:            return "X86ISD::MOVLHPS";
  case X86ISD::MOVHLPS:            return "X86ISD::MOVHLPS";
  case X86ISD::MOVLPS:             return "X86ISD::MOVLPS";
  case X86ISD::MOVLPD:             return "X86ISD::MOVLPD";
  case X86ISD::MOVDDUP:            return "X86ISD::MOVDDUP";
  case X86ISD::MOVSHDUP:           return "X86ISD::MOVSHDUP";
  case X86ISD::MOVSLDUP:           return "X86ISD::MOVSLDUP";
  case X86ISD::MOVSD:              return "X86ISD::MOVSD";
  case X86ISD::MOVSS:              return "X86ISD::MOVSS";
  case X86ISD::UNPCKL:             return "X86ISD::UNPCKL";
  case X86ISD::UNPCKH:             return "X86ISD::UNPCKH";
  case X86ISD::VBROADCAST:         return "X86ISD::VBROADCAST";
  case X86ISD::VBROADCASTM:        return "X86ISD::VBROADCASTM";
  case X86ISD::SUBV_BROADCAST:     return "X86ISD::SUBV_BROADCAST";
  case X86ISD::VEXTRACT:           return "X86ISD::VEXTRACT";
  case X86ISD::VPERMILPV:          return "X86ISD::VPERMILPV";
  case X86ISD::VPERMILPI:          return "X86ISD::VPERMILPI";
  case X86ISD::VPERM2X128:         return "X86ISD::VPERM2X128";
  case X86ISD::VPERMV:             return "X86ISD::VPERMV";
  case X86ISD::VPERMV3:            return "X86ISD::VPERMV3";
  case X86ISD::VPERMIV3:           return "X86ISD::VPERMIV3";
  case X86ISD::VPERMI:             return "X86ISD::VPERMI";
  case X86ISD::VPTERNLOG:          return "X86ISD::VPTERNLOG";
  case X86ISD::VFIXUPIMM:          return "X86ISD::VFIXUPIMM";
  case X86ISD::VFIXUPIMMS:          return "X86ISD::VFIXUPIMMS";
  case X86ISD::VRANGE:             return "X86ISD::VRANGE";
  case X86ISD::PMULUDQ:            return "X86ISD::PMULUDQ";
  case X86ISD::PMULDQ:             return "X86ISD::PMULDQ";
  case X86ISD::PSADBW:             return "X86ISD::PSADBW";
  case X86ISD::DBPSADBW:           return "X86ISD::DBPSADBW";
  case X86ISD::VASTART_SAVE_XMM_REGS: return "X86ISD::VASTART_SAVE_XMM_REGS";
  case X86ISD::VAARG_64:           return "X86ISD::VAARG_64";
  case X86ISD::WIN_ALLOCA:         return "X86ISD::WIN_ALLOCA";
  case X86ISD::MEMBARRIER:         return "X86ISD::MEMBARRIER";
  case X86ISD::MFENCE:             return "X86ISD::MFENCE";
  case X86ISD::SEG_ALLOCA:         return "X86ISD::SEG_ALLOCA";
  case X86ISD::SAHF:               return "X86ISD::SAHF";
  case X86ISD::RDRAND:             return "X86ISD::RDRAND";
  case X86ISD::RDSEED:             return "X86ISD::RDSEED";
  case X86ISD::VPMADDUBSW:         return "X86ISD::VPMADDUBSW";
  case X86ISD::VPMADDWD:           return "X86ISD::VPMADDWD";
  case X86ISD::VPSHA:              return "X86ISD::VPSHA";
  case X86ISD::VPSHL:              return "X86ISD::VPSHL";
  case X86ISD::VPCOM:              return "X86ISD::VPCOM";
  case X86ISD::VPCOMU:             return "X86ISD::VPCOMU";
  case X86ISD::VPERMIL2:           return "X86ISD::VPERMIL2";
  case X86ISD::FMSUB:              return "X86ISD::FMSUB";
  case X86ISD::FNMADD:             return "X86ISD::FNMADD";
  case X86ISD::FNMSUB:             return "X86ISD::FNMSUB";
  case X86ISD::FMADDSUB:           return "X86ISD::FMADDSUB";
  case X86ISD::FMSUBADD:           return "X86ISD::FMSUBADD";
  case X86ISD::FMADD_RND:          return "X86ISD::FMADD_RND";
  case X86ISD::FNMADD_RND:         return "X86ISD::FNMADD_RND";
  case X86ISD::FMSUB_RND:          return "X86ISD::FMSUB_RND";
  case X86ISD::FNMSUB_RND:         return "X86ISD::FNMSUB_RND";
  case X86ISD::FMADDSUB_RND:       return "X86ISD::FMADDSUB_RND";
  case X86ISD::FMSUBADD_RND:       return "X86ISD::FMSUBADD_RND";
  case X86ISD::FMADDS1:            return "X86ISD::FMADDS1";
  case X86ISD::FNMADDS1:           return "X86ISD::FNMADDS1";
  case X86ISD::FMSUBS1:            return "X86ISD::FMSUBS1";
  case X86ISD::FNMSUBS1:           return "X86ISD::FNMSUBS1";
  case X86ISD::FMADDS1_RND:        return "X86ISD::FMADDS1_RND";
  case X86ISD::FNMADDS1_RND:       return "X86ISD::FNMADDS1_RND";
  case X86ISD::FMSUBS1_RND:        return "X86ISD::FMSUBS1_RND";
  case X86ISD::FNMSUBS1_RND:       return "X86ISD::FNMSUBS1_RND";
  case X86ISD::FMADDS3:            return "X86ISD::FMADDS3";
  case X86ISD::FNMADDS3:           return "X86ISD::FNMADDS3";
  case X86ISD::FMSUBS3:            return "X86ISD::FMSUBS3";
  case X86ISD::FNMSUBS3:           return "X86ISD::FNMSUBS3";
  case X86ISD::FMADDS3_RND:        return "X86ISD::FMADDS3_RND";
  case X86ISD::FNMADDS3_RND:       return "X86ISD::FNMADDS3_RND";
  case X86ISD::FMSUBS3_RND:        return "X86ISD::FMSUBS3_RND";
  case X86ISD::FNMSUBS3_RND:       return "X86ISD::FNMSUBS3_RND";
  case X86ISD::VPMADD52H:          return "X86ISD::VPMADD52H";
  case X86ISD::VPMADD52L:          return "X86ISD::VPMADD52L";
  case X86ISD::VRNDSCALE:          return "X86ISD::VRNDSCALE";
  case X86ISD::VRNDSCALES:         return "X86ISD::VRNDSCALES";
  case X86ISD::VREDUCE:            return "X86ISD::VREDUCE";
  case X86ISD::VREDUCES:           return "X86ISD::VREDUCES";
  case X86ISD::VGETMANT:           return "X86ISD::VGETMANT";
  case X86ISD::VGETMANTS:          return "X86ISD::VGETMANTS";
  case X86ISD::PCMPESTRI:          return "X86ISD::PCMPESTRI";
  case X86ISD::PCMPISTRI:          return "X86ISD::PCMPISTRI";
  case X86ISD::XTEST:              return "X86ISD::XTEST";
  case X86ISD::COMPRESS:           return "X86ISD::COMPRESS";
  case X86ISD::EXPAND:             return "X86ISD::EXPAND";
  case X86ISD::SELECT:             return "X86ISD::SELECT";
  case X86ISD::SELECTS:            return "X86ISD::SELECTS";
  case X86ISD::ADDSUB:             return "X86ISD::ADDSUB";
  case X86ISD::RCP14:              return "X86ISD::RCP14";
  case X86ISD::RCP14S:             return "X86ISD::RCP14S";
  case X86ISD::RCP28:              return "X86ISD::RCP28";
  case X86ISD::RCP28S:             return "X86ISD::RCP28S";
  case X86ISD::EXP2:               return "X86ISD::EXP2";
  case X86ISD::RSQRT14:            return "X86ISD::RSQRT14";
  case X86ISD::RSQRT14S:           return "X86ISD::RSQRT14S";
  case X86ISD::RSQRT28:            return "X86ISD::RSQRT28";
  case X86ISD::RSQRT28S:           return "X86ISD::RSQRT28S";
  case X86ISD::FADD_RND:           return "X86ISD::FADD_RND";
  case X86ISD::FADDS_RND:          return "X86ISD::FADDS_RND";
  case X86ISD::FSUB_RND:           return "X86ISD::FSUB_RND";
  case X86ISD::FSUBS_RND:          return "X86ISD::FSUBS_RND";
  case X86ISD::FMUL_RND:           return "X86ISD::FMUL_RND";
  case X86ISD::FMULS_RND:          return "X86ISD::FMULS_RND";
  case X86ISD::FDIV_RND:           return "X86ISD::FDIV_RND";
  case X86ISD::FDIVS_RND:          return "X86ISD::FDIVS_RND";
  case X86ISD::FSQRT_RND:          return "X86ISD::FSQRT_RND";
  case X86ISD::FSQRTS_RND:         return "X86ISD::FSQRTS_RND";
  case X86ISD::FGETEXP_RND:        return "X86ISD::FGETEXP_RND";
  case X86ISD::FGETEXPS_RND:       return "X86ISD::FGETEXPS_RND";
  case X86ISD::SCALEF:             return "X86ISD::SCALEF";
  case X86ISD::SCALEFS:            return "X86ISD::SCALEFS";
  case X86ISD::ADDS:               return "X86ISD::ADDS";
  case X86ISD::SUBS:               return "X86ISD::SUBS";
  case X86ISD::AVG:                return "X86ISD::AVG";
  case X86ISD::MULHRS:             return "X86ISD::MULHRS";
  case X86ISD::SINT_TO_FP_RND:     return "X86ISD::SINT_TO_FP_RND";
  case X86ISD::UINT_TO_FP_RND:     return "X86ISD::UINT_TO_FP_RND";
  case X86ISD::CVTTP2SI:           return "X86ISD::CVTTP2SI";
  case X86ISD::CVTTP2UI:           return "X86ISD::CVTTP2UI";
  case X86ISD::CVTTP2SI_RND:       return "X86ISD::CVTTP2SI_RND";
  case X86ISD::CVTTP2UI_RND:       return "X86ISD::CVTTP2UI_RND";
  case X86ISD::CVTTS2SI_RND:       return "X86ISD::CVTTS2SI_RND";
  case X86ISD::CVTTS2UI_RND:       return "X86ISD::CVTTS2UI_RND";
  case X86ISD::CVTSI2P:            return "X86ISD::CVTSI2P";
  case X86ISD::CVTUI2P:            return "X86ISD::CVTUI2P";
  case X86ISD::VFPCLASS:           return "X86ISD::VFPCLASS";
  case X86ISD::VFPCLASSS:          return "X86ISD::VFPCLASSS";
  case X86ISD::MULTISHIFT:         return "X86ISD::MULTISHIFT";
  case X86ISD::SCALAR_SINT_TO_FP_RND: return "X86ISD::SCALAR_SINT_TO_FP_RND";
  case X86ISD::SCALAR_UINT_TO_FP_RND: return "X86ISD::SCALAR_UINT_TO_FP_RND";
  case X86ISD::CVTPS2PH:           return "X86ISD::CVTPS2PH";
  case X86ISD::CVTPH2PS:           return "X86ISD::CVTPH2PS";
  case X86ISD::CVTPH2PS_RND:       return "X86ISD::CVTPH2PS_RND";
  case X86ISD::CVTP2SI:            return "X86ISD::CVTP2SI";
  case X86ISD::CVTP2UI:            return "X86ISD::CVTP2UI";
  case X86ISD::CVTP2SI_RND:        return "X86ISD::CVTP2SI_RND";
  case X86ISD::CVTP2UI_RND:        return "X86ISD::CVTP2UI_RND";
  case X86ISD::CVTS2SI_RND:        return "X86ISD::CVTS2SI_RND";
  case X86ISD::CVTS2UI_RND:        return "X86ISD::CVTS2UI_RND";
  case X86ISD::LWPINS:             return "X86ISD::LWPINS";
  case X86ISD::MGATHER:            return "X86ISD::MGATHER";
  }
  return nullptr;
}

/// Return true if the addressing mode represented by AM is legal for this
/// target, for a load/store of the specified type.
bool X86TargetLowering::isLegalAddressingMode(const DataLayout &DL,
                                              const AddrMode &AM, Type *Ty,
                                              unsigned AS,
                                              Instruction *I) const {
  // X86 supports extremely general addressing modes.
  CodeModel::Model M = getTargetMachine().getCodeModel();

  // X86 allows a sign-extended 32-bit immediate field as a displacement.
  if (!X86::isOffsetSuitableForCodeModel(AM.BaseOffs, M, AM.BaseGV != nullptr))
    return false;

  if (AM.BaseGV) {
    unsigned GVFlags = Subtarget.classifyGlobalReference(AM.BaseGV);

    // If a reference to this global requires an extra load, we can't fold it.
    if (isGlobalStubReference(GVFlags))
      return false;

    // If BaseGV requires a register for the PIC base, we cannot also have a
    // BaseReg specified.
    if (AM.HasBaseReg && isGlobalRelativeToPICBase(GVFlags))
      return false;

    // If lower 4G is not available, then we must use rip-relative addressing.
    if ((M != CodeModel::Small || isPositionIndependent()) &&
        Subtarget.is64Bit() && (AM.BaseOffs || AM.Scale > 1))
      return false;
  }

  switch (AM.Scale) {
  case 0:
  case 1:
  case 2:
  case 4:
  case 8:
    // These scales always work.
    break;
  case 3:
  case 5:
  case 9:
    // These scales are formed with basereg+scalereg.  Only accept if there is
    // no basereg yet.
    if (AM.HasBaseReg)
      return false;
    break;
  default:  // Other stuff never works.
    return false;
  }

  return true;
}

bool X86TargetLowering::isVectorShiftByScalarCheap(Type *Ty) const {
  unsigned Bits = Ty->getScalarSizeInBits();

  // 8-bit shifts are always expensive, but versions with a scalar amount aren't
  // particularly cheaper than those without.
  if (Bits == 8)
    return false;

  // On AVX2 there are new vpsllv[dq] instructions (and other shifts), that make
  // variable shifts just as cheap as scalar ones.
  if (Subtarget.hasInt256() && (Bits == 32 || Bits == 64))
    return false;

  // Otherwise, it's significantly cheaper to shift by a scalar amount than by a
  // fully general vector.
  return true;
}

bool X86TargetLowering::isTruncateFree(Type *Ty1, Type *Ty2) const {
  if (!Ty1->isIntegerTy() || !Ty2->isIntegerTy())
    return false;
  unsigned NumBits1 = Ty1->getPrimitiveSizeInBits();
  unsigned NumBits2 = Ty2->getPrimitiveSizeInBits();
  return NumBits1 > NumBits2;
}

bool X86TargetLowering::allowTruncateForTailCall(Type *Ty1, Type *Ty2) const {
  if (!Ty1->isIntegerTy() || !Ty2->isIntegerTy())
    return false;

  if (!isTypeLegal(EVT::getEVT(Ty1)))
    return false;

  assert(Ty1->getPrimitiveSizeInBits() <= 64 && "i128 is probably not a noop");

  // Assuming the caller doesn't have a zeroext or signext return parameter,
  // truncation all the way down to i1 is valid.
  return true;
}

bool X86TargetLowering::isLegalICmpImmediate(int64_t Imm) const {
  return isInt<32>(Imm);
}

bool X86TargetLowering::isLegalAddImmediate(int64_t Imm) const {
  // Can also use sub to handle negated immediates.
  return isInt<32>(Imm);
}

bool X86TargetLowering::isTruncateFree(EVT VT1, EVT VT2) const {
  if (!VT1.isInteger() || !VT2.isInteger())
    return false;
  unsigned NumBits1 = VT1.getSizeInBits();
  unsigned NumBits2 = VT2.getSizeInBits();
  return NumBits1 > NumBits2;
}

bool X86TargetLowering::isZExtFree(Type *Ty1, Type *Ty2) const {
  // x86-64 implicitly zero-extends 32-bit results in 64-bit registers.
  return Ty1->isIntegerTy(32) && Ty2->isIntegerTy(64) && Subtarget.is64Bit();
}

bool X86TargetLowering::isZExtFree(EVT VT1, EVT VT2) const {
  // x86-64 implicitly zero-extends 32-bit results in 64-bit registers.
  return VT1 == MVT::i32 && VT2 == MVT::i64 && Subtarget.is64Bit();
}

bool X86TargetLowering::isZExtFree(SDValue Val, EVT VT2) const {
  EVT VT1 = Val.getValueType();
  if (isZExtFree(VT1, VT2))
    return true;

  if (Val.getOpcode() != ISD::LOAD)
    return false;

  if (!VT1.isSimple() || !VT1.isInteger() ||
      !VT2.isSimple() || !VT2.isInteger())
    return false;

  switch (VT1.getSimpleVT().SimpleTy) {
  default: break;
  case MVT::i8:
  case MVT::i16:
  case MVT::i32:
    // X86 has 8, 16, and 32-bit zero-extending loads.
    return true;
  }

  return false;
}

bool X86TargetLowering::isVectorLoadExtDesirable(SDValue) const { return true; }

bool
X86TargetLowering::isFMAFasterThanFMulAndFAdd(EVT VT) const {
  if (!Subtarget.hasAnyFMA())
    return false;

  VT = VT.getScalarType();

  if (!VT.isSimple())
    return false;

  switch (VT.getSimpleVT().SimpleTy) {
  case MVT::f32:
  case MVT::f64:
    return true;
  default:
    break;
  }

  return false;
}

bool X86TargetLowering::isNarrowingProfitable(EVT VT1, EVT VT2) const {
  // i16 instructions are longer (0x66 prefix) and potentially slower.
  return !(VT1 == MVT::i32 && VT2 == MVT::i16);
}

/// Targets can use this to indicate that they only support *some*
/// VECTOR_SHUFFLE operations, those with specific masks.
/// By default, if a target supports the VECTOR_SHUFFLE node, all mask values
/// are assumed to be legal.
bool X86TargetLowering::isShuffleMaskLegal(ArrayRef<int> M, EVT VT) const {
  if (!VT.isSimple())
    return false;

  // Not for i1 vectors
  if (VT.getSimpleVT().getScalarType() == MVT::i1)
    return false;

  // Very little shuffling can be done for 64-bit vectors right now.
  if (VT.getSimpleVT().getSizeInBits() == 64)
    return false;

  // We only care that the types being shuffled are legal. The lowering can
  // handle any possible shuffle mask that results.
  return isTypeLegal(VT.getSimpleVT());
}

bool
X86TargetLowering::isVectorClearMaskLegal(const SmallVectorImpl<int> &Mask,
                                          EVT VT) const {
  // Just delegate to the generic legality, clear masks aren't special.
  return isShuffleMaskLegal(Mask, VT);
}

//===----------------------------------------------------------------------===//
//                           X86 Scheduler Hooks
//===----------------------------------------------------------------------===//

/// Utility function to emit xbegin specifying the start of an RTM region.
static MachineBasicBlock *emitXBegin(MachineInstr &MI, MachineBasicBlock *MBB,
                                     const TargetInstrInfo *TII) {
  DebugLoc DL = MI.getDebugLoc();

  const BasicBlock *BB = MBB->getBasicBlock();
  MachineFunction::iterator I = ++MBB->getIterator();

  // For the v = xbegin(), we generate
  //
  // thisMBB:
  //  xbegin sinkMBB
  //
  // mainMBB:
  //  s0 = -1
  //
  // fallBB:
  //  eax = # XABORT_DEF
  //  s1 = eax
  //
  // sinkMBB:
  //  v = phi(s0/mainBB, s1/fallBB)

  MachineBasicBlock *thisMBB = MBB;
  MachineFunction *MF = MBB->getParent();
  MachineBasicBlock *mainMBB = MF->CreateMachineBasicBlock(BB);
  MachineBasicBlock *fallMBB = MF->CreateMachineBasicBlock(BB);
  MachineBasicBlock *sinkMBB = MF->CreateMachineBasicBlock(BB);
  MF->insert(I, mainMBB);
  MF->insert(I, fallMBB);
  MF->insert(I, sinkMBB);

  // Transfer the remainder of BB and its successor edges to sinkMBB.
  sinkMBB->splice(sinkMBB->begin(), MBB,
                  std::next(MachineBasicBlock::iterator(MI)), MBB->end());
  sinkMBB->transferSuccessorsAndUpdatePHIs(MBB);

  MachineRegisterInfo &MRI = MF->getRegInfo();
  unsigned DstReg = MI.getOperand(0).getReg();
  const TargetRegisterClass *RC = MRI.getRegClass(DstReg);
  unsigned mainDstReg = MRI.createVirtualRegister(RC);
  unsigned fallDstReg = MRI.createVirtualRegister(RC);

  // thisMBB:
  //  xbegin fallMBB
  //  # fallthrough to mainMBB
  //  # abortion to fallMBB
  BuildMI(thisMBB, DL, TII->get(X86::XBEGIN_4)).addMBB(fallMBB);
  thisMBB->addSuccessor(mainMBB);
  thisMBB->addSuccessor(fallMBB);

  // mainMBB:
  //  mainDstReg := -1
  BuildMI(mainMBB, DL, TII->get(X86::MOV32ri), mainDstReg).addImm(-1);
  BuildMI(mainMBB, DL, TII->get(X86::JMP_1)).addMBB(sinkMBB);
  mainMBB->addSuccessor(sinkMBB);

  // fallMBB:
  //  ; pseudo instruction to model hardware's definition from XABORT
  //  EAX := XABORT_DEF
  //  fallDstReg := EAX
  BuildMI(fallMBB, DL, TII->get(X86::XABORT_DEF));
  BuildMI(fallMBB, DL, TII->get(TargetOpcode::COPY), fallDstReg)
      .addReg(X86::EAX);
  fallMBB->addSuccessor(sinkMBB);

  // sinkMBB:
  //  DstReg := phi(mainDstReg/mainBB, fallDstReg/fallBB)
  BuildMI(*sinkMBB, sinkMBB->begin(), DL, TII->get(X86::PHI), DstReg)
      .addReg(mainDstReg).addMBB(mainMBB)
      .addReg(fallDstReg).addMBB(fallMBB);

  MI.eraseFromParent();
  return sinkMBB;
}

// FIXME: When we get size specific XMM0 registers, i.e. XMM0_V16I8
// or XMM0_V32I8 in AVX all of this code can be replaced with that
// in the .td file.
static MachineBasicBlock *emitPCMPSTRM(MachineInstr &MI, MachineBasicBlock *BB,
                                       const TargetInstrInfo *TII) {
  unsigned Opc;
  switch (MI.getOpcode()) {
  default: llvm_unreachable("illegal opcode!");
  case X86::PCMPISTRM128REG:  Opc = X86::PCMPISTRM128rr;  break;
  case X86::VPCMPISTRM128REG: Opc = X86::VPCMPISTRM128rr; break;
  case X86::PCMPISTRM128MEM:  Opc = X86::PCMPISTRM128rm;  break;
  case X86::VPCMPISTRM128MEM: Opc = X86::VPCMPISTRM128rm; break;
  case X86::PCMPESTRM128REG:  Opc = X86::PCMPESTRM128rr;  break;
  case X86::VPCMPESTRM128REG: Opc = X86::VPCMPESTRM128rr; break;
  case X86::PCMPESTRM128MEM:  Opc = X86::PCMPESTRM128rm;  break;
  case X86::VPCMPESTRM128MEM: Opc = X86::VPCMPESTRM128rm; break;
  }

  DebugLoc dl = MI.getDebugLoc();
  MachineInstrBuilder MIB = BuildMI(*BB, MI, dl, TII->get(Opc));

  unsigned NumArgs = MI.getNumOperands();
  for (unsigned i = 1; i < NumArgs; ++i) {
    MachineOperand &Op = MI.getOperand(i);
    if (!(Op.isReg() && Op.isImplicit()))
      MIB.add(Op);
  }
  if (MI.hasOneMemOperand())
    MIB->setMemRefs(MI.memoperands_begin(), MI.memoperands_end());

  BuildMI(*BB, MI, dl, TII->get(TargetOpcode::COPY), MI.getOperand(0).getReg())
      .addReg(X86::XMM0);

  MI.eraseFromParent();
  return BB;
}

// FIXME: Custom handling because TableGen doesn't support multiple implicit
// defs in an instruction pattern
static MachineBasicBlock *emitPCMPSTRI(MachineInstr &MI, MachineBasicBlock *BB,
                                       const TargetInstrInfo *TII) {
  unsigned Opc;
  switch (MI.getOpcode()) {
  default: llvm_unreachable("illegal opcode!");
  case X86::PCMPISTRIREG:  Opc = X86::PCMPISTRIrr;  break;
  case X86::VPCMPISTRIREG: Opc = X86::VPCMPISTRIrr; break;
  case X86::PCMPISTRIMEM:  Opc = X86::PCMPISTRIrm;  break;
  case X86::VPCMPISTRIMEM: Opc = X86::VPCMPISTRIrm; break;
  case X86::PCMPESTRIREG:  Opc = X86::PCMPESTRIrr;  break;
  case X86::VPCMPESTRIREG: Opc = X86::VPCMPESTRIrr; break;
  case X86::PCMPESTRIMEM:  Opc = X86::PCMPESTRIrm;  break;
  case X86::VPCMPESTRIMEM: Opc = X86::VPCMPESTRIrm; break;
  }

  DebugLoc dl = MI.getDebugLoc();
  MachineInstrBuilder MIB = BuildMI(*BB, MI, dl, TII->get(Opc));

  unsigned NumArgs = MI.getNumOperands(); // remove the results
  for (unsigned i = 1; i < NumArgs; ++i) {
    MachineOperand &Op = MI.getOperand(i);
    if (!(Op.isReg() && Op.isImplicit()))
      MIB.add(Op);
  }
  if (MI.hasOneMemOperand())
    MIB->setMemRefs(MI.memoperands_begin(), MI.memoperands_end());

  BuildMI(*BB, MI, dl, TII->get(TargetOpcode::COPY), MI.getOperand(0).getReg())
      .addReg(X86::ECX);

  MI.eraseFromParent();
  return BB;
}

static MachineBasicBlock *emitWRPKRU(MachineInstr &MI, MachineBasicBlock *BB,
                                     const X86Subtarget &Subtarget) {
  DebugLoc dl = MI.getDebugLoc();
  const TargetInstrInfo *TII = Subtarget.getInstrInfo();

  // insert input VAL into EAX
  BuildMI(*BB, MI, dl, TII->get(TargetOpcode::COPY), X86::EAX)
      .addReg(MI.getOperand(0).getReg());
  // insert zero to ECX
  BuildMI(*BB, MI, dl, TII->get(X86::MOV32r0), X86::ECX);

  // insert zero to EDX
  BuildMI(*BB, MI, dl, TII->get(X86::MOV32r0), X86::EDX);

  // insert WRPKRU instruction
  BuildMI(*BB, MI, dl, TII->get(X86::WRPKRUr));

  MI.eraseFromParent(); // The pseudo is gone now.
  return BB;
}

static MachineBasicBlock *emitRDPKRU(MachineInstr &MI, MachineBasicBlock *BB,
                                     const X86Subtarget &Subtarget) {
  DebugLoc dl = MI.getDebugLoc();
  const TargetInstrInfo *TII = Subtarget.getInstrInfo();

  // insert zero to ECX
  BuildMI(*BB, MI, dl, TII->get(X86::MOV32r0), X86::ECX);

  // insert RDPKRU instruction
  BuildMI(*BB, MI, dl, TII->get(X86::RDPKRUr));
  BuildMI(*BB, MI, dl, TII->get(TargetOpcode::COPY), MI.getOperand(0).getReg())
      .addReg(X86::EAX);

  MI.eraseFromParent(); // The pseudo is gone now.
  return BB;
}

static MachineBasicBlock *emitMonitor(MachineInstr &MI, MachineBasicBlock *BB,
                                      const X86Subtarget &Subtarget,
                                      unsigned Opc) {
  DebugLoc dl = MI.getDebugLoc();
  const TargetInstrInfo *TII = Subtarget.getInstrInfo();
  // Address into RAX/EAX, other two args into ECX, EDX.
  unsigned MemOpc = Subtarget.is64Bit() ? X86::LEA64r : X86::LEA32r;
  unsigned MemReg = Subtarget.is64Bit() ? X86::RAX : X86::EAX;
  MachineInstrBuilder MIB = BuildMI(*BB, MI, dl, TII->get(MemOpc), MemReg);
  for (int i = 0; i < X86::AddrNumOperands; ++i)
    MIB.add(MI.getOperand(i));

  unsigned ValOps = X86::AddrNumOperands;
  BuildMI(*BB, MI, dl, TII->get(TargetOpcode::COPY), X86::ECX)
      .addReg(MI.getOperand(ValOps).getReg());
  BuildMI(*BB, MI, dl, TII->get(TargetOpcode::COPY), X86::EDX)
      .addReg(MI.getOperand(ValOps + 1).getReg());

  // The instruction doesn't actually take any operands though.
  BuildMI(*BB, MI, dl, TII->get(Opc));

  MI.eraseFromParent(); // The pseudo is gone now.
  return BB;
}

static MachineBasicBlock *emitClzero(MachineInstr *MI, MachineBasicBlock *BB,
                                      const X86Subtarget &Subtarget) {
  DebugLoc dl = MI->getDebugLoc();
  const TargetInstrInfo *TII = Subtarget.getInstrInfo();
  // Address into RAX/EAX
  unsigned MemOpc = Subtarget.is64Bit() ? X86::LEA64r : X86::LEA32r;
  unsigned MemReg = Subtarget.is64Bit() ? X86::RAX : X86::EAX;
  MachineInstrBuilder MIB = BuildMI(*BB, MI, dl, TII->get(MemOpc), MemReg);
  for (int i = 0; i < X86::AddrNumOperands; ++i)
    MIB.add(MI->getOperand(i));

  // The instruction doesn't actually take any operands though.
  BuildMI(*BB, MI, dl, TII->get(X86::CLZEROr));

  MI->eraseFromParent(); // The pseudo is gone now.
  return BB;
}


MachineBasicBlock *
X86TargetLowering::EmitVAARG64WithCustomInserter(MachineInstr &MI,
                                                 MachineBasicBlock *MBB) const {
  // Emit va_arg instruction on X86-64.

  // Operands to this pseudo-instruction:
  // 0  ) Output        : destination address (reg)
  // 1-5) Input         : va_list address (addr, i64mem)
  // 6  ) ArgSize       : Size (in bytes) of vararg type
  // 7  ) ArgMode       : 0=overflow only, 1=use gp_offset, 2=use fp_offset
  // 8  ) Align         : Alignment of type
  // 9  ) EFLAGS (implicit-def)

  assert(MI.getNumOperands() == 10 && "VAARG_64 should have 10 operands!");
  static_assert(X86::AddrNumOperands == 5,
                "VAARG_64 assumes 5 address operands");

  unsigned DestReg = MI.getOperand(0).getReg();
  MachineOperand &Base = MI.getOperand(1);
  MachineOperand &Scale = MI.getOperand(2);
  MachineOperand &Index = MI.getOperand(3);
  MachineOperand &Disp = MI.getOperand(4);
  MachineOperand &Segment = MI.getOperand(5);
  unsigned ArgSize = MI.getOperand(6).getImm();
  unsigned ArgMode = MI.getOperand(7).getImm();
  unsigned Align = MI.getOperand(8).getImm();

  // Memory Reference
  assert(MI.hasOneMemOperand() && "Expected VAARG_64 to have one memoperand");
  MachineInstr::mmo_iterator MMOBegin = MI.memoperands_begin();
  MachineInstr::mmo_iterator MMOEnd = MI.memoperands_end();

  // Machine Information
  const TargetInstrInfo *TII = Subtarget.getInstrInfo();
  MachineRegisterInfo &MRI = MBB->getParent()->getRegInfo();
  const TargetRegisterClass *AddrRegClass = getRegClassFor(MVT::i64);
  const TargetRegisterClass *OffsetRegClass = getRegClassFor(MVT::i32);
  DebugLoc DL = MI.getDebugLoc();

  // struct va_list {
  //   i32   gp_offset
  //   i32   fp_offset
  //   i64   overflow_area (address)
  //   i64   reg_save_area (address)
  // }
  // sizeof(va_list) = 24
  // alignment(va_list) = 8

  unsigned TotalNumIntRegs = 6;
  unsigned TotalNumXMMRegs = 8;
  bool UseGPOffset = (ArgMode == 1);
  bool UseFPOffset = (ArgMode == 2);
  unsigned MaxOffset = TotalNumIntRegs * 8 +
                       (UseFPOffset ? TotalNumXMMRegs * 16 : 0);

  /* Align ArgSize to a multiple of 8 */
  unsigned ArgSizeA8 = (ArgSize + 7) & ~7;
  bool NeedsAlign = (Align > 8);

  MachineBasicBlock *thisMBB = MBB;
  MachineBasicBlock *overflowMBB;
  MachineBasicBlock *offsetMBB;
  MachineBasicBlock *endMBB;

  unsigned OffsetDestReg = 0;    // Argument address computed by offsetMBB
  unsigned OverflowDestReg = 0;  // Argument address computed by overflowMBB
  unsigned OffsetReg = 0;

  if (!UseGPOffset && !UseFPOffset) {
    // If we only pull from the overflow region, we don't create a branch.
    // We don't need to alter control flow.
    OffsetDestReg = 0; // unused
    OverflowDestReg = DestReg;

    offsetMBB = nullptr;
    overflowMBB = thisMBB;
    endMBB = thisMBB;
  } else {
    // First emit code to check if gp_offset (or fp_offset) is below the bound.
    // If so, pull the argument from reg_save_area. (branch to offsetMBB)
    // If not, pull from overflow_area. (branch to overflowMBB)
    //
    //       thisMBB
    //         |     .
    //         |        .
    //     offsetMBB   overflowMBB
    //         |        .
    //         |     .
    //        endMBB

    // Registers for the PHI in endMBB
    OffsetDestReg = MRI.createVirtualRegister(AddrRegClass);
    OverflowDestReg = MRI.createVirtualRegister(AddrRegClass);

    const BasicBlock *LLVM_BB = MBB->getBasicBlock();
    MachineFunction *MF = MBB->getParent();
    overflowMBB = MF->CreateMachineBasicBlock(LLVM_BB);
    offsetMBB = MF->CreateMachineBasicBlock(LLVM_BB);
    endMBB = MF->CreateMachineBasicBlock(LLVM_BB);

    MachineFunction::iterator MBBIter = ++MBB->getIterator();

    // Insert the new basic blocks
    MF->insert(MBBIter, offsetMBB);
    MF->insert(MBBIter, overflowMBB);
    MF->insert(MBBIter, endMBB);

    // Transfer the remainder of MBB and its successor edges to endMBB.
    endMBB->splice(endMBB->begin(), thisMBB,
                   std::next(MachineBasicBlock::iterator(MI)), thisMBB->end());
    endMBB->transferSuccessorsAndUpdatePHIs(thisMBB);

    // Make offsetMBB and overflowMBB successors of thisMBB
    thisMBB->addSuccessor(offsetMBB);
    thisMBB->addSuccessor(overflowMBB);

    // endMBB is a successor of both offsetMBB and overflowMBB
    offsetMBB->addSuccessor(endMBB);
    overflowMBB->addSuccessor(endMBB);

    // Load the offset value into a register
    OffsetReg = MRI.createVirtualRegister(OffsetRegClass);
    BuildMI(thisMBB, DL, TII->get(X86::MOV32rm), OffsetReg)
        .add(Base)
        .add(Scale)
        .add(Index)
        .addDisp(Disp, UseFPOffset ? 4 : 0)
        .add(Segment)
        .setMemRefs(MMOBegin, MMOEnd);

    // Check if there is enough room left to pull this argument.
    BuildMI(thisMBB, DL, TII->get(X86::CMP32ri))
      .addReg(OffsetReg)
      .addImm(MaxOffset + 8 - ArgSizeA8);

    // Branch to "overflowMBB" if offset >= max
    // Fall through to "offsetMBB" otherwise
    BuildMI(thisMBB, DL, TII->get(X86::GetCondBranchFromCond(X86::COND_AE)))
      .addMBB(overflowMBB);
  }

  // In offsetMBB, emit code to use the reg_save_area.
  if (offsetMBB) {
    assert(OffsetReg != 0);

    // Read the reg_save_area address.
    unsigned RegSaveReg = MRI.createVirtualRegister(AddrRegClass);
    BuildMI(offsetMBB, DL, TII->get(X86::MOV64rm), RegSaveReg)
        .add(Base)
        .add(Scale)
        .add(Index)
        .addDisp(Disp, 16)
        .add(Segment)
        .setMemRefs(MMOBegin, MMOEnd);

    // Zero-extend the offset
    unsigned OffsetReg64 = MRI.createVirtualRegister(AddrRegClass);
      BuildMI(offsetMBB, DL, TII->get(X86::SUBREG_TO_REG), OffsetReg64)
        .addImm(0)
        .addReg(OffsetReg)
        .addImm(X86::sub_32bit);

    // Add the offset to the reg_save_area to get the final address.
    BuildMI(offsetMBB, DL, TII->get(X86::ADD64rr), OffsetDestReg)
      .addReg(OffsetReg64)
      .addReg(RegSaveReg);

    // Compute the offset for the next argument
    unsigned NextOffsetReg = MRI.createVirtualRegister(OffsetRegClass);
    BuildMI(offsetMBB, DL, TII->get(X86::ADD32ri), NextOffsetReg)
      .addReg(OffsetReg)
      .addImm(UseFPOffset ? 16 : 8);

    // Store it back into the va_list.
    BuildMI(offsetMBB, DL, TII->get(X86::MOV32mr))
        .add(Base)
        .add(Scale)
        .add(Index)
        .addDisp(Disp, UseFPOffset ? 4 : 0)
        .add(Segment)
        .addReg(NextOffsetReg)
        .setMemRefs(MMOBegin, MMOEnd);

    // Jump to endMBB
    BuildMI(offsetMBB, DL, TII->get(X86::JMP_1))
      .addMBB(endMBB);
  }

  //
  // Emit code to use overflow area
  //

  // Load the overflow_area address into a register.
  unsigned OverflowAddrReg = MRI.createVirtualRegister(AddrRegClass);
  BuildMI(overflowMBB, DL, TII->get(X86::MOV64rm), OverflowAddrReg)
      .add(Base)
      .add(Scale)
      .add(Index)
      .addDisp(Disp, 8)
      .add(Segment)
      .setMemRefs(MMOBegin, MMOEnd);

  // If we need to align it, do so. Otherwise, just copy the address
  // to OverflowDestReg.
  if (NeedsAlign) {
    // Align the overflow address
    assert(isPowerOf2_32(Align) && "Alignment must be a power of 2");
    unsigned TmpReg = MRI.createVirtualRegister(AddrRegClass);

    // aligned_addr = (addr + (align-1)) & ~(align-1)
    BuildMI(overflowMBB, DL, TII->get(X86::ADD64ri32), TmpReg)
      .addReg(OverflowAddrReg)
      .addImm(Align-1);

    BuildMI(overflowMBB, DL, TII->get(X86::AND64ri32), OverflowDestReg)
      .addReg(TmpReg)
      .addImm(~(uint64_t)(Align-1));
  } else {
    BuildMI(overflowMBB, DL, TII->get(TargetOpcode::COPY), OverflowDestReg)
      .addReg(OverflowAddrReg);
  }

  // Compute the next overflow address after this argument.
  // (the overflow address should be kept 8-byte aligned)
  unsigned NextAddrReg = MRI.createVirtualRegister(AddrRegClass);
  BuildMI(overflowMBB, DL, TII->get(X86::ADD64ri32), NextAddrReg)
    .addReg(OverflowDestReg)
    .addImm(ArgSizeA8);

  // Store the new overflow address.
  BuildMI(overflowMBB, DL, TII->get(X86::MOV64mr))
      .add(Base)
      .add(Scale)
      .add(Index)
      .addDisp(Disp, 8)
      .add(Segment)
      .addReg(NextAddrReg)
      .setMemRefs(MMOBegin, MMOEnd);

  // If we branched, emit the PHI to the front of endMBB.
  if (offsetMBB) {
    BuildMI(*endMBB, endMBB->begin(), DL,
            TII->get(X86::PHI), DestReg)
      .addReg(OffsetDestReg).addMBB(offsetMBB)
      .addReg(OverflowDestReg).addMBB(overflowMBB);
  }

  // Erase the pseudo instruction
  MI.eraseFromParent();

  return endMBB;
}

MachineBasicBlock *X86TargetLowering::EmitVAStartSaveXMMRegsWithCustomInserter(
    MachineInstr &MI, MachineBasicBlock *MBB) const {
  // Emit code to save XMM registers to the stack. The ABI says that the
  // number of registers to save is given in %al, so it's theoretically
  // possible to do an indirect jump trick to avoid saving all of them,
  // however this code takes a simpler approach and just executes all
  // of the stores if %al is non-zero. It's less code, and it's probably
  // easier on the hardware branch predictor, and stores aren't all that
  // expensive anyway.

  // Create the new basic blocks. One block contains all the XMM stores,
  // and one block is the final destination regardless of whether any
  // stores were performed.
  const BasicBlock *LLVM_BB = MBB->getBasicBlock();
  MachineFunction *F = MBB->getParent();
  MachineFunction::iterator MBBIter = ++MBB->getIterator();
  MachineBasicBlock *XMMSaveMBB = F->CreateMachineBasicBlock(LLVM_BB);
  MachineBasicBlock *EndMBB = F->CreateMachineBasicBlock(LLVM_BB);
  F->insert(MBBIter, XMMSaveMBB);
  F->insert(MBBIter, EndMBB);

  // Transfer the remainder of MBB and its successor edges to EndMBB.
  EndMBB->splice(EndMBB->begin(), MBB,
                 std::next(MachineBasicBlock::iterator(MI)), MBB->end());
  EndMBB->transferSuccessorsAndUpdatePHIs(MBB);

  // The original block will now fall through to the XMM save block.
  MBB->addSuccessor(XMMSaveMBB);
  // The XMMSaveMBB will fall through to the end block.
  XMMSaveMBB->addSuccessor(EndMBB);

  // Now add the instructions.
  const TargetInstrInfo *TII = Subtarget.getInstrInfo();
  DebugLoc DL = MI.getDebugLoc();

  unsigned CountReg = MI.getOperand(0).getReg();
  int64_t RegSaveFrameIndex = MI.getOperand(1).getImm();
  int64_t VarArgsFPOffset = MI.getOperand(2).getImm();

  if (!Subtarget.isCallingConvWin64(F->getFunction()->getCallingConv())) {
    // If %al is 0, branch around the XMM save block.
    BuildMI(MBB, DL, TII->get(X86::TEST8rr)).addReg(CountReg).addReg(CountReg);
    BuildMI(MBB, DL, TII->get(X86::JE_1)).addMBB(EndMBB);
    MBB->addSuccessor(EndMBB);
  }

  // Make sure the last operand is EFLAGS, which gets clobbered by the branch
  // that was just emitted, but clearly shouldn't be "saved".
  assert((MI.getNumOperands() <= 3 ||
          !MI.getOperand(MI.getNumOperands() - 1).isReg() ||
          MI.getOperand(MI.getNumOperands() - 1).getReg() == X86::EFLAGS) &&
         "Expected last argument to be EFLAGS");
  unsigned MOVOpc = Subtarget.hasFp256() ? X86::VMOVAPSmr : X86::MOVAPSmr;
  // In the XMM save block, save all the XMM argument registers.
  for (int i = 3, e = MI.getNumOperands() - 1; i != e; ++i) {
    int64_t Offset = (i - 3) * 16 + VarArgsFPOffset;
    MachineMemOperand *MMO = F->getMachineMemOperand(
        MachinePointerInfo::getFixedStack(*F, RegSaveFrameIndex, Offset),
        MachineMemOperand::MOStore,
        /*Size=*/16, /*Align=*/16);
    BuildMI(XMMSaveMBB, DL, TII->get(MOVOpc))
        .addFrameIndex(RegSaveFrameIndex)
        .addImm(/*Scale=*/1)
        .addReg(/*IndexReg=*/0)
        .addImm(/*Disp=*/Offset)
        .addReg(/*Segment=*/0)
        .addReg(MI.getOperand(i).getReg())
        .addMemOperand(MMO);
  }

  MI.eraseFromParent(); // The pseudo instruction is gone now.

  return EndMBB;
}

// The EFLAGS operand of SelectItr might be missing a kill marker
// because there were multiple uses of EFLAGS, and ISel didn't know
// which to mark. Figure out whether SelectItr should have had a
// kill marker, and set it if it should. Returns the correct kill
// marker value.
static bool checkAndUpdateEFLAGSKill(MachineBasicBlock::iterator SelectItr,
                                     MachineBasicBlock* BB,
                                     const TargetRegisterInfo* TRI) {
  // Scan forward through BB for a use/def of EFLAGS.
  MachineBasicBlock::iterator miI(std::next(SelectItr));
  for (MachineBasicBlock::iterator miE = BB->end(); miI != miE; ++miI) {
    const MachineInstr& mi = *miI;
    if (mi.readsRegister(X86::EFLAGS))
      return false;
    if (mi.definesRegister(X86::EFLAGS))
      break; // Should have kill-flag - update below.
  }

  // If we hit the end of the block, check whether EFLAGS is live into a
  // successor.
  if (miI == BB->end()) {
    for (MachineBasicBlock::succ_iterator sItr = BB->succ_begin(),
                                          sEnd = BB->succ_end();
         sItr != sEnd; ++sItr) {
      MachineBasicBlock* succ = *sItr;
      if (succ->isLiveIn(X86::EFLAGS))
        return false;
    }
  }

  // We found a def, or hit the end of the basic block and EFLAGS wasn't live
  // out. SelectMI should have a kill flag on EFLAGS.
  SelectItr->addRegisterKilled(X86::EFLAGS, TRI);
  return true;
}

// Return true if it is OK for this CMOV pseudo-opcode to be cascaded
// together with other CMOV pseudo-opcodes into a single basic-block with
// conditional jump around it.
static bool isCMOVPseudo(MachineInstr &MI) {
  switch (MI.getOpcode()) {
  case X86::CMOV_FR32:
  case X86::CMOV_FR64:
  case X86::CMOV_GR8:
  case X86::CMOV_GR16:
  case X86::CMOV_GR32:
  case X86::CMOV_RFP32:
  case X86::CMOV_RFP64:
  case X86::CMOV_RFP80:
  case X86::CMOV_V2F64:
  case X86::CMOV_V2I64:
  case X86::CMOV_V4F32:
  case X86::CMOV_V4F64:
  case X86::CMOV_V4I64:
  case X86::CMOV_V16F32:
  case X86::CMOV_V8F32:
  case X86::CMOV_V8F64:
  case X86::CMOV_V8I64:
  case X86::CMOV_V8I1:
  case X86::CMOV_V16I1:
  case X86::CMOV_V32I1:
  case X86::CMOV_V64I1:
    return true;

  default:
    return false;
  }
}

// Helper function, which inserts PHI functions into SinkMBB:
//   %Result(i) = phi [ %FalseValue(i), FalseMBB ], [ %TrueValue(i), TrueMBB ],
// where %FalseValue(i) and %TrueValue(i) are taken from the consequent CMOVs
// in [MIItBegin, MIItEnd) range. It returns the last MachineInstrBuilder for
// the last PHI function inserted.
static MachineInstrBuilder createPHIsForCMOVsInSinkBB(
    MachineBasicBlock::iterator MIItBegin, MachineBasicBlock::iterator MIItEnd,
    MachineBasicBlock *TrueMBB, MachineBasicBlock *FalseMBB,
    MachineBasicBlock *SinkMBB) {
  MachineFunction *MF = TrueMBB->getParent();
  const TargetInstrInfo *TII = MF->getSubtarget().getInstrInfo();
  DebugLoc DL = MIItBegin->getDebugLoc();

  X86::CondCode CC = X86::CondCode(MIItBegin->getOperand(3).getImm());
  X86::CondCode OppCC = X86::GetOppositeBranchCondition(CC);

  MachineBasicBlock::iterator SinkInsertionPoint = SinkMBB->begin();

  // As we are creating the PHIs, we have to be careful if there is more than
  // one.  Later CMOVs may reference the results of earlier CMOVs, but later
  // PHIs have to reference the individual true/false inputs from earlier PHIs.
  // That also means that PHI construction must work forward from earlier to
  // later, and that the code must maintain a mapping from earlier PHI's
  // destination registers, and the registers that went into the PHI.
  DenseMap<unsigned, std::pair<unsigned, unsigned>> RegRewriteTable;
  MachineInstrBuilder MIB;

  for (MachineBasicBlock::iterator MIIt = MIItBegin; MIIt != MIItEnd; ++MIIt) {
    unsigned DestReg = MIIt->getOperand(0).getReg();
    unsigned Op1Reg = MIIt->getOperand(1).getReg();
    unsigned Op2Reg = MIIt->getOperand(2).getReg();

    // If this CMOV we are generating is the opposite condition from
    // the jump we generated, then we have to swap the operands for the
    // PHI that is going to be generated.
    if (MIIt->getOperand(3).getImm() == OppCC)
      std::swap(Op1Reg, Op2Reg);

    if (RegRewriteTable.find(Op1Reg) != RegRewriteTable.end())
      Op1Reg = RegRewriteTable[Op1Reg].first;

    if (RegRewriteTable.find(Op2Reg) != RegRewriteTable.end())
      Op2Reg = RegRewriteTable[Op2Reg].second;

    MIB = BuildMI(*SinkMBB, SinkInsertionPoint, DL, TII->get(X86::PHI), DestReg)
              .addReg(Op1Reg)
              .addMBB(FalseMBB)
              .addReg(Op2Reg)
              .addMBB(TrueMBB);

    // Add this PHI to the rewrite table.
    RegRewriteTable[DestReg] = std::make_pair(Op1Reg, Op2Reg);
  }

  return MIB;
}

// Lower cascaded selects in form of (SecondCmov (FirstCMOV F, T, cc1), T, cc2).
MachineBasicBlock *
X86TargetLowering::EmitLoweredCascadedSelect(MachineInstr &FirstCMOV,
                                             MachineInstr &SecondCascadedCMOV,
                                             MachineBasicBlock *ThisMBB) const {
  const TargetInstrInfo *TII = Subtarget.getInstrInfo();
  DebugLoc DL = FirstCMOV.getDebugLoc();

  // We lower cascaded CMOVs such as
  //
  //   (SecondCascadedCMOV (FirstCMOV F, T, cc1), T, cc2)
  //
  // to two successive branches.
  //
  // Without this, we would add a PHI between the two jumps, which ends up
  // creating a few copies all around. For instance, for
  //
  //    (sitofp (zext (fcmp une)))
  //
  // we would generate:
  //
  //         ucomiss %xmm1, %xmm0
  //         movss  <1.0f>, %xmm0
  //         movaps  %xmm0, %xmm1
  //         jne     .LBB5_2
  //         xorps   %xmm1, %xmm1
  // .LBB5_2:
  //         jp      .LBB5_4
  //         movaps  %xmm1, %xmm0
  // .LBB5_4:
  //         retq
  //
  // because this custom-inserter would have generated:
  //
  //   A
  //   | \
  //   |  B
  //   | /
  //   C
  //   | \
  //   |  D
  //   | /
  //   E
  //
  // A: X = ...; Y = ...
  // B: empty
  // C: Z = PHI [X, A], [Y, B]
  // D: empty
  // E: PHI [X, C], [Z, D]
  //
  // If we lower both CMOVs in a single step, we can instead generate:
  //
  //   A
  //   | \
  //   |  C
  //   | /|
  //   |/ |
  //   |  |
  //   |  D
  //   | /
  //   E
  //
  // A: X = ...; Y = ...
  // D: empty
  // E: PHI [X, A], [X, C], [Y, D]
  //
  // Which, in our sitofp/fcmp example, gives us something like:
  //
  //         ucomiss %xmm1, %xmm0
  //         movss  <1.0f>, %xmm0
  //         jne     .LBB5_4
  //         jp      .LBB5_4
  //         xorps   %xmm0, %xmm0
  // .LBB5_4:
  //         retq
  //

  // We lower cascaded CMOV into two successive branches to the same block.
  // EFLAGS is used by both, so mark it as live in the second.
  const BasicBlock *LLVM_BB = ThisMBB->getBasicBlock();
  MachineFunction *F = ThisMBB->getParent();
  MachineBasicBlock *FirstInsertedMBB = F->CreateMachineBasicBlock(LLVM_BB);
  MachineBasicBlock *SecondInsertedMBB = F->CreateMachineBasicBlock(LLVM_BB);
  MachineBasicBlock *SinkMBB = F->CreateMachineBasicBlock(LLVM_BB);

  MachineFunction::iterator It = ++ThisMBB->getIterator();
  F->insert(It, FirstInsertedMBB);
  F->insert(It, SecondInsertedMBB);
  F->insert(It, SinkMBB);

  // For a cascaded CMOV, we lower it to two successive branches to
  // the same block (SinkMBB).  EFLAGS is used by both, so mark it as live in
  // the FirstInsertedMBB.
  FirstInsertedMBB->addLiveIn(X86::EFLAGS);

  // If the EFLAGS register isn't dead in the terminator, then claim that it's
  // live into the sink and copy blocks.
  const TargetRegisterInfo *TRI = Subtarget.getRegisterInfo();
  if (!SecondCascadedCMOV.killsRegister(X86::EFLAGS) &&
      !checkAndUpdateEFLAGSKill(SecondCascadedCMOV, ThisMBB, TRI)) {
    SecondInsertedMBB->addLiveIn(X86::EFLAGS);
    SinkMBB->addLiveIn(X86::EFLAGS);
  }

  // Transfer the remainder of ThisMBB and its successor edges to SinkMBB.
  SinkMBB->splice(SinkMBB->begin(), ThisMBB,
                  std::next(MachineBasicBlock::iterator(FirstCMOV)),
                  ThisMBB->end());
  SinkMBB->transferSuccessorsAndUpdatePHIs(ThisMBB);

  // Fallthrough block for ThisMBB.
  ThisMBB->addSuccessor(FirstInsertedMBB);
  // The true block target of the first branch is always SinkMBB.
  ThisMBB->addSuccessor(SinkMBB);
  // Fallthrough block for FirstInsertedMBB.
  FirstInsertedMBB->addSuccessor(SecondInsertedMBB);
  // The true block for the branch of FirstInsertedMBB.
  FirstInsertedMBB->addSuccessor(SinkMBB);
  // This is fallthrough.
  SecondInsertedMBB->addSuccessor(SinkMBB);

  // Create the conditional branch instructions.
  X86::CondCode FirstCC = X86::CondCode(FirstCMOV.getOperand(3).getImm());
  unsigned Opc = X86::GetCondBranchFromCond(FirstCC);
  BuildMI(ThisMBB, DL, TII->get(Opc)).addMBB(SinkMBB);

  X86::CondCode SecondCC =
      X86::CondCode(SecondCascadedCMOV.getOperand(3).getImm());
  unsigned Opc2 = X86::GetCondBranchFromCond(SecondCC);
  BuildMI(FirstInsertedMBB, DL, TII->get(Opc2)).addMBB(SinkMBB);

  //  SinkMBB:
  //   %Result = phi [ %FalseValue, SecondInsertedMBB ], [ %TrueValue, ThisMBB ]
  unsigned DestReg = FirstCMOV.getOperand(0).getReg();
  unsigned Op1Reg = FirstCMOV.getOperand(1).getReg();
  unsigned Op2Reg = FirstCMOV.getOperand(2).getReg();
  MachineInstrBuilder MIB =
      BuildMI(*SinkMBB, SinkMBB->begin(), DL, TII->get(X86::PHI), DestReg)
          .addReg(Op1Reg)
          .addMBB(SecondInsertedMBB)
          .addReg(Op2Reg)
          .addMBB(ThisMBB);

  // The second SecondInsertedMBB provides the same incoming value as the
  // FirstInsertedMBB (the True operand of the SELECT_CC/CMOV nodes).
  MIB.addReg(FirstCMOV.getOperand(2).getReg()).addMBB(FirstInsertedMBB);
  // Copy the PHI result to the register defined by the second CMOV.
  BuildMI(*SinkMBB, std::next(MachineBasicBlock::iterator(MIB.getInstr())), DL,
          TII->get(TargetOpcode::COPY),
          SecondCascadedCMOV.getOperand(0).getReg())
      .addReg(FirstCMOV.getOperand(0).getReg());

  // Now remove the CMOVs.
  FirstCMOV.eraseFromParent();
  SecondCascadedCMOV.eraseFromParent();

  return SinkMBB;
}

MachineBasicBlock *
X86TargetLowering::EmitLoweredSelect(MachineInstr &MI,
                                     MachineBasicBlock *ThisMBB) const {
  const TargetInstrInfo *TII = Subtarget.getInstrInfo();
  DebugLoc DL = MI.getDebugLoc();

  // To "insert" a SELECT_CC instruction, we actually have to insert the
  // diamond control-flow pattern.  The incoming instruction knows the
  // destination vreg to set, the condition code register to branch on, the
  // true/false values to select between and a branch opcode to use.

  //  ThisMBB:
  //  ...
  //   TrueVal = ...
  //   cmpTY ccX, r1, r2
  //   bCC copy1MBB
  //   fallthrough --> FalseMBB

  // This code lowers all pseudo-CMOV instructions. Generally it lowers these
  // as described above, by inserting a BB, and then making a PHI at the join
  // point to select the true and false operands of the CMOV in the PHI.
  //
  // The code also handles two different cases of multiple CMOV opcodes
  // in a row.
  //
  // Case 1:
  // In this case, there are multiple CMOVs in a row, all which are based on
  // the same condition setting (or the exact opposite condition setting).
  // In this case we can lower all the CMOVs using a single inserted BB, and
  // then make a number of PHIs at the join point to model the CMOVs. The only
  // trickiness here, is that in a case like:
  //
  // t2 = CMOV cond1 t1, f1
  // t3 = CMOV cond1 t2, f2
  //
  // when rewriting this into PHIs, we have to perform some renaming on the
  // temps since you cannot have a PHI operand refer to a PHI result earlier
  // in the same block.  The "simple" but wrong lowering would be:
  //
  // t2 = PHI t1(BB1), f1(BB2)
  // t3 = PHI t2(BB1), f2(BB2)
  //
  // but clearly t2 is not defined in BB1, so that is incorrect. The proper
  // renaming is to note that on the path through BB1, t2 is really just a
  // copy of t1, and do that renaming, properly generating:
  //
  // t2 = PHI t1(BB1), f1(BB2)
  // t3 = PHI t1(BB1), f2(BB2)
  //
  // Case 2:
  // CMOV ((CMOV F, T, cc1), T, cc2) is checked here and handled by a separate
  // function - EmitLoweredCascadedSelect.

  X86::CondCode CC = X86::CondCode(MI.getOperand(3).getImm());
  X86::CondCode OppCC = X86::GetOppositeBranchCondition(CC);
  MachineInstr *LastCMOV = &MI;
  MachineBasicBlock::iterator NextMIIt =
      std::next(MachineBasicBlock::iterator(MI));

  // Check for case 1, where there are multiple CMOVs with the same condition
  // first.  Of the two cases of multiple CMOV lowerings, case 1 reduces the
  // number of jumps the most.

  if (isCMOVPseudo(MI)) {
    // See if we have a string of CMOVS with the same condition.
    while (NextMIIt != ThisMBB->end() && isCMOVPseudo(*NextMIIt) &&
           (NextMIIt->getOperand(3).getImm() == CC ||
            NextMIIt->getOperand(3).getImm() == OppCC)) {
      LastCMOV = &*NextMIIt;
      ++NextMIIt;
    }
  }

  // This checks for case 2, but only do this if we didn't already find
  // case 1, as indicated by LastCMOV == MI.
  if (LastCMOV == &MI && NextMIIt != ThisMBB->end() &&
      NextMIIt->getOpcode() == MI.getOpcode() &&
      NextMIIt->getOperand(2).getReg() == MI.getOperand(2).getReg() &&
      NextMIIt->getOperand(1).getReg() == MI.getOperand(0).getReg() &&
      NextMIIt->getOperand(1).isKill()) {
    return EmitLoweredCascadedSelect(MI, *NextMIIt, ThisMBB);
  }

  const BasicBlock *LLVM_BB = ThisMBB->getBasicBlock();
  MachineFunction *F = ThisMBB->getParent();
  MachineBasicBlock *FalseMBB = F->CreateMachineBasicBlock(LLVM_BB);
  MachineBasicBlock *SinkMBB = F->CreateMachineBasicBlock(LLVM_BB);

  MachineFunction::iterator It = ++ThisMBB->getIterator();
  F->insert(It, FalseMBB);
  F->insert(It, SinkMBB);

  // If the EFLAGS register isn't dead in the terminator, then claim that it's
  // live into the sink and copy blocks.
  const TargetRegisterInfo *TRI = Subtarget.getRegisterInfo();
  if (!LastCMOV->killsRegister(X86::EFLAGS) &&
      !checkAndUpdateEFLAGSKill(LastCMOV, ThisMBB, TRI)) {
    FalseMBB->addLiveIn(X86::EFLAGS);
    SinkMBB->addLiveIn(X86::EFLAGS);
  }

  // Transfer the remainder of ThisMBB and its successor edges to SinkMBB.
  SinkMBB->splice(SinkMBB->begin(), ThisMBB,
                  std::next(MachineBasicBlock::iterator(LastCMOV)),
                  ThisMBB->end());
  SinkMBB->transferSuccessorsAndUpdatePHIs(ThisMBB);

  // Fallthrough block for ThisMBB.
  ThisMBB->addSuccessor(FalseMBB);
  // The true block target of the first (or only) branch is always a SinkMBB.
  ThisMBB->addSuccessor(SinkMBB);
  // Fallthrough block for FalseMBB.
  FalseMBB->addSuccessor(SinkMBB);

  // Create the conditional branch instruction.
  unsigned Opc = X86::GetCondBranchFromCond(CC);
  BuildMI(ThisMBB, DL, TII->get(Opc)).addMBB(SinkMBB);

  //  SinkMBB:
  //   %Result = phi [ %FalseValue, FalseMBB ], [ %TrueValue, ThisMBB ]
  //  ...
  MachineBasicBlock::iterator MIItBegin = MachineBasicBlock::iterator(MI);
  MachineBasicBlock::iterator MIItEnd =
      std::next(MachineBasicBlock::iterator(LastCMOV));
  createPHIsForCMOVsInSinkBB(MIItBegin, MIItEnd, ThisMBB, FalseMBB, SinkMBB);

  // Now remove the CMOV(s).
  ThisMBB->erase(MIItBegin, MIItEnd);

  return SinkMBB;
}

MachineBasicBlock *
X86TargetLowering::EmitLoweredAtomicFP(MachineInstr &MI,
                                       MachineBasicBlock *BB) const {
  // Combine the following atomic floating-point modification pattern:
  //   a.store(reg OP a.load(acquire), release)
  // Transform them into:
  //   OPss (%gpr), %xmm
  //   movss %xmm, (%gpr)
  // Or sd equivalent for 64-bit operations.
  unsigned MOp, FOp;
  switch (MI.getOpcode()) {
  default: llvm_unreachable("unexpected instr type for EmitLoweredAtomicFP");
  case X86::RELEASE_FADD32mr:
    FOp = X86::ADDSSrm;
    MOp = X86::MOVSSmr;
    break;
  case X86::RELEASE_FADD64mr:
    FOp = X86::ADDSDrm;
    MOp = X86::MOVSDmr;
    break;
  }
  const X86InstrInfo *TII = Subtarget.getInstrInfo();
  DebugLoc DL = MI.getDebugLoc();
  MachineRegisterInfo &MRI = BB->getParent()->getRegInfo();
  unsigned ValOpIdx = X86::AddrNumOperands;
  unsigned VSrc = MI.getOperand(ValOpIdx).getReg();
  MachineInstrBuilder MIB =
      BuildMI(*BB, MI, DL, TII->get(FOp),
              MRI.createVirtualRegister(MRI.getRegClass(VSrc)))
          .addReg(VSrc);
  for (int i = 0; i < X86::AddrNumOperands; ++i) {
    MachineOperand &Operand = MI.getOperand(i);
    // Clear any kill flags on register operands as we'll create a second
    // instruction using the same address operands.
    if (Operand.isReg())
      Operand.setIsKill(false);
    MIB.add(Operand);
  }
  MachineInstr *FOpMI = MIB;
  MIB = BuildMI(*BB, MI, DL, TII->get(MOp));
  for (int i = 0; i < X86::AddrNumOperands; ++i)
    MIB.add(MI.getOperand(i));
  MIB.addReg(FOpMI->getOperand(0).getReg(), RegState::Kill);
  MI.eraseFromParent(); // The pseudo instruction is gone now.
  return BB;
}

MachineBasicBlock *
X86TargetLowering::EmitLoweredSegAlloca(MachineInstr &MI,
                                        MachineBasicBlock *BB) const {
  MachineFunction *MF = BB->getParent();
  const TargetInstrInfo *TII = Subtarget.getInstrInfo();
  DebugLoc DL = MI.getDebugLoc();
  const BasicBlock *LLVM_BB = BB->getBasicBlock();

  assert(MF->shouldSplitStack());

  const bool Is64Bit = Subtarget.is64Bit();
  const bool IsLP64 = Subtarget.isTarget64BitLP64();

  const unsigned TlsReg = Is64Bit ? X86::FS : X86::GS;
  const unsigned TlsOffset = IsLP64 ? 0x70 : Is64Bit ? 0x40 : 0x30;

  // BB:
  //  ... [Till the alloca]
  // If stacklet is not large enough, jump to mallocMBB
  //
  // bumpMBB:
  //  Allocate by subtracting from RSP
  //  Jump to continueMBB
  //
  // mallocMBB:
  //  Allocate by call to runtime
  //
  // continueMBB:
  //  ...
  //  [rest of original BB]
  //

  MachineBasicBlock *mallocMBB = MF->CreateMachineBasicBlock(LLVM_BB);
  MachineBasicBlock *bumpMBB = MF->CreateMachineBasicBlock(LLVM_BB);
  MachineBasicBlock *continueMBB = MF->CreateMachineBasicBlock(LLVM_BB);

  MachineRegisterInfo &MRI = MF->getRegInfo();
  const TargetRegisterClass *AddrRegClass =
      getRegClassFor(getPointerTy(MF->getDataLayout()));

  unsigned mallocPtrVReg = MRI.createVirtualRegister(AddrRegClass),
           bumpSPPtrVReg = MRI.createVirtualRegister(AddrRegClass),
           tmpSPVReg = MRI.createVirtualRegister(AddrRegClass),
           SPLimitVReg = MRI.createVirtualRegister(AddrRegClass),
           sizeVReg = MI.getOperand(1).getReg(),
           physSPReg =
               IsLP64 || Subtarget.isTargetNaCl64() ? X86::RSP : X86::ESP;

  MachineFunction::iterator MBBIter = ++BB->getIterator();

  MF->insert(MBBIter, bumpMBB);
  MF->insert(MBBIter, mallocMBB);
  MF->insert(MBBIter, continueMBB);

  continueMBB->splice(continueMBB->begin(), BB,
                      std::next(MachineBasicBlock::iterator(MI)), BB->end());
  continueMBB->transferSuccessorsAndUpdatePHIs(BB);

  // Add code to the main basic block to check if the stack limit has been hit,
  // and if so, jump to mallocMBB otherwise to bumpMBB.
  BuildMI(BB, DL, TII->get(TargetOpcode::COPY), tmpSPVReg).addReg(physSPReg);
  BuildMI(BB, DL, TII->get(IsLP64 ? X86::SUB64rr:X86::SUB32rr), SPLimitVReg)
    .addReg(tmpSPVReg).addReg(sizeVReg);
  BuildMI(BB, DL, TII->get(IsLP64 ? X86::CMP64mr:X86::CMP32mr))
    .addReg(0).addImm(1).addReg(0).addImm(TlsOffset).addReg(TlsReg)
    .addReg(SPLimitVReg);
  BuildMI(BB, DL, TII->get(X86::JG_1)).addMBB(mallocMBB);

  // bumpMBB simply decreases the stack pointer, since we know the current
  // stacklet has enough space.
  BuildMI(bumpMBB, DL, TII->get(TargetOpcode::COPY), physSPReg)
    .addReg(SPLimitVReg);
  BuildMI(bumpMBB, DL, TII->get(TargetOpcode::COPY), bumpSPPtrVReg)
    .addReg(SPLimitVReg);
  BuildMI(bumpMBB, DL, TII->get(X86::JMP_1)).addMBB(continueMBB);

  // Calls into a routine in libgcc to allocate more space from the heap.
  const uint32_t *RegMask =
      Subtarget.getRegisterInfo()->getCallPreservedMask(*MF, CallingConv::C);
  if (IsLP64) {
    BuildMI(mallocMBB, DL, TII->get(X86::MOV64rr), X86::RDI)
      .addReg(sizeVReg);
    BuildMI(mallocMBB, DL, TII->get(X86::CALL64pcrel32))
      .addExternalSymbol("__morestack_allocate_stack_space")
      .addRegMask(RegMask)
      .addReg(X86::RDI, RegState::Implicit)
      .addReg(X86::RAX, RegState::ImplicitDefine);
  } else if (Is64Bit) {
    BuildMI(mallocMBB, DL, TII->get(X86::MOV32rr), X86::EDI)
      .addReg(sizeVReg);
    BuildMI(mallocMBB, DL, TII->get(X86::CALL64pcrel32))
      .addExternalSymbol("__morestack_allocate_stack_space")
      .addRegMask(RegMask)
      .addReg(X86::EDI, RegState::Implicit)
      .addReg(X86::EAX, RegState::ImplicitDefine);
  } else {
    BuildMI(mallocMBB, DL, TII->get(X86::SUB32ri), physSPReg).addReg(physSPReg)
      .addImm(12);
    BuildMI(mallocMBB, DL, TII->get(X86::PUSH32r)).addReg(sizeVReg);
    BuildMI(mallocMBB, DL, TII->get(X86::CALLpcrel32))
      .addExternalSymbol("__morestack_allocate_stack_space")
      .addRegMask(RegMask)
      .addReg(X86::EAX, RegState::ImplicitDefine);
  }

  if (!Is64Bit)
    BuildMI(mallocMBB, DL, TII->get(X86::ADD32ri), physSPReg).addReg(physSPReg)
      .addImm(16);

  BuildMI(mallocMBB, DL, TII->get(TargetOpcode::COPY), mallocPtrVReg)
    .addReg(IsLP64 ? X86::RAX : X86::EAX);
  BuildMI(mallocMBB, DL, TII->get(X86::JMP_1)).addMBB(continueMBB);

  // Set up the CFG correctly.
  BB->addSuccessor(bumpMBB);
  BB->addSuccessor(mallocMBB);
  mallocMBB->addSuccessor(continueMBB);
  bumpMBB->addSuccessor(continueMBB);

  // Take care of the PHI nodes.
  BuildMI(*continueMBB, continueMBB->begin(), DL, TII->get(X86::PHI),
          MI.getOperand(0).getReg())
      .addReg(mallocPtrVReg)
      .addMBB(mallocMBB)
      .addReg(bumpSPPtrVReg)
      .addMBB(bumpMBB);

  // Delete the original pseudo instruction.
  MI.eraseFromParent();

  // And we're done.
  return continueMBB;
}

MachineBasicBlock *
X86TargetLowering::EmitLoweredCatchRet(MachineInstr &MI,
                                       MachineBasicBlock *BB) const {
  MachineFunction *MF = BB->getParent();
  const TargetInstrInfo &TII = *Subtarget.getInstrInfo();
  MachineBasicBlock *TargetMBB = MI.getOperand(0).getMBB();
  DebugLoc DL = MI.getDebugLoc();

  assert(!isAsynchronousEHPersonality(
             classifyEHPersonality(MF->getFunction()->getPersonalityFn())) &&
         "SEH does not use catchret!");

  // Only 32-bit EH needs to worry about manually restoring stack pointers.
  if (!Subtarget.is32Bit())
    return BB;

  // C++ EH creates a new target block to hold the restore code, and wires up
  // the new block to the return destination with a normal JMP_4.
  MachineBasicBlock *RestoreMBB =
      MF->CreateMachineBasicBlock(BB->getBasicBlock());
  assert(BB->succ_size() == 1);
  MF->insert(std::next(BB->getIterator()), RestoreMBB);
  RestoreMBB->transferSuccessorsAndUpdatePHIs(BB);
  BB->addSuccessor(RestoreMBB);
  MI.getOperand(0).setMBB(RestoreMBB);

  auto RestoreMBBI = RestoreMBB->begin();
  BuildMI(*RestoreMBB, RestoreMBBI, DL, TII.get(X86::EH_RESTORE));
  BuildMI(*RestoreMBB, RestoreMBBI, DL, TII.get(X86::JMP_4)).addMBB(TargetMBB);
  return BB;
}

MachineBasicBlock *
X86TargetLowering::EmitLoweredCatchPad(MachineInstr &MI,
                                       MachineBasicBlock *BB) const {
  MachineFunction *MF = BB->getParent();
  const Constant *PerFn = MF->getFunction()->getPersonalityFn();
  bool IsSEH = isAsynchronousEHPersonality(classifyEHPersonality(PerFn));
  // Only 32-bit SEH requires special handling for catchpad.
  if (IsSEH && Subtarget.is32Bit()) {
    const TargetInstrInfo &TII = *Subtarget.getInstrInfo();
    DebugLoc DL = MI.getDebugLoc();
    BuildMI(*BB, MI, DL, TII.get(X86::EH_RESTORE));
  }
  MI.eraseFromParent();
  return BB;
}

MachineBasicBlock *
X86TargetLowering::EmitLoweredTLSAddr(MachineInstr &MI,
                                      MachineBasicBlock *BB) const {
  // So, here we replace TLSADDR with the sequence:
  // adjust_stackdown -> TLSADDR -> adjust_stackup.
  // We need this because TLSADDR is lowered into calls
  // inside MC, therefore without the two markers shrink-wrapping
  // may push the prologue/epilogue pass them.
  const TargetInstrInfo &TII = *Subtarget.getInstrInfo();
  DebugLoc DL = MI.getDebugLoc();
  MachineFunction &MF = *BB->getParent();

  // Emit CALLSEQ_START right before the instruction.
  unsigned AdjStackDown = TII.getCallFrameSetupOpcode();
  MachineInstrBuilder CallseqStart =
    BuildMI(MF, DL, TII.get(AdjStackDown)).addImm(0).addImm(0).addImm(0);
  BB->insert(MachineBasicBlock::iterator(MI), CallseqStart);

  // Emit CALLSEQ_END right after the instruction.
  // We don't call erase from parent because we want to keep the
  // original instruction around.
  unsigned AdjStackUp = TII.getCallFrameDestroyOpcode();
  MachineInstrBuilder CallseqEnd =
    BuildMI(MF, DL, TII.get(AdjStackUp)).addImm(0).addImm(0);
  BB->insertAfter(MachineBasicBlock::iterator(MI), CallseqEnd);

  return BB;
}

MachineBasicBlock *
X86TargetLowering::EmitLoweredTLSCall(MachineInstr &MI,
                                      MachineBasicBlock *BB) const {
  // This is pretty easy.  We're taking the value that we received from
  // our load from the relocation, sticking it in either RDI (x86-64)
  // or EAX and doing an indirect call.  The return value will then
  // be in the normal return register.
  MachineFunction *F = BB->getParent();
  const X86InstrInfo *TII = Subtarget.getInstrInfo();
  DebugLoc DL = MI.getDebugLoc();

  assert(Subtarget.isTargetDarwin() && "Darwin only instr emitted?");
  assert(MI.getOperand(3).isGlobal() && "This should be a global");

  // Get a register mask for the lowered call.
  // FIXME: The 32-bit calls have non-standard calling conventions. Use a
  // proper register mask.
  const uint32_t *RegMask =
      Subtarget.is64Bit() ?
      Subtarget.getRegisterInfo()->getDarwinTLSCallPreservedMask() :
      Subtarget.getRegisterInfo()->getCallPreservedMask(*F, CallingConv::C);
  if (Subtarget.is64Bit()) {
    MachineInstrBuilder MIB =
        BuildMI(*BB, MI, DL, TII->get(X86::MOV64rm), X86::RDI)
            .addReg(X86::RIP)
            .addImm(0)
            .addReg(0)
            .addGlobalAddress(MI.getOperand(3).getGlobal(), 0,
                              MI.getOperand(3).getTargetFlags())
            .addReg(0);
    MIB = BuildMI(*BB, MI, DL, TII->get(X86::CALL64m));
    addDirectMem(MIB, X86::RDI);
    MIB.addReg(X86::RAX, RegState::ImplicitDefine).addRegMask(RegMask);
  } else if (!isPositionIndependent()) {
    MachineInstrBuilder MIB =
        BuildMI(*BB, MI, DL, TII->get(X86::MOV32rm), X86::EAX)
            .addReg(0)
            .addImm(0)
            .addReg(0)
            .addGlobalAddress(MI.getOperand(3).getGlobal(), 0,
                              MI.getOperand(3).getTargetFlags())
            .addReg(0);
    MIB = BuildMI(*BB, MI, DL, TII->get(X86::CALL32m));
    addDirectMem(MIB, X86::EAX);
    MIB.addReg(X86::EAX, RegState::ImplicitDefine).addRegMask(RegMask);
  } else {
    MachineInstrBuilder MIB =
        BuildMI(*BB, MI, DL, TII->get(X86::MOV32rm), X86::EAX)
            .addReg(TII->getGlobalBaseReg(F))
            .addImm(0)
            .addReg(0)
            .addGlobalAddress(MI.getOperand(3).getGlobal(), 0,
                              MI.getOperand(3).getTargetFlags())
            .addReg(0);
    MIB = BuildMI(*BB, MI, DL, TII->get(X86::CALL32m));
    addDirectMem(MIB, X86::EAX);
    MIB.addReg(X86::EAX, RegState::ImplicitDefine).addRegMask(RegMask);
  }

  MI.eraseFromParent(); // The pseudo instruction is gone now.
  return BB;
}

MachineBasicBlock *
X86TargetLowering::emitEHSjLjSetJmp(MachineInstr &MI,
                                    MachineBasicBlock *MBB) const {
  DebugLoc DL = MI.getDebugLoc();
  MachineFunction *MF = MBB->getParent();
  const TargetInstrInfo *TII = Subtarget.getInstrInfo();
  const TargetRegisterInfo *TRI = Subtarget.getRegisterInfo();
  MachineRegisterInfo &MRI = MF->getRegInfo();

  const BasicBlock *BB = MBB->getBasicBlock();
  MachineFunction::iterator I = ++MBB->getIterator();

  // Memory Reference
  MachineInstr::mmo_iterator MMOBegin = MI.memoperands_begin();
  MachineInstr::mmo_iterator MMOEnd = MI.memoperands_end();

  unsigned DstReg;
  unsigned MemOpndSlot = 0;

  unsigned CurOp = 0;

  DstReg = MI.getOperand(CurOp++).getReg();
  const TargetRegisterClass *RC = MRI.getRegClass(DstReg);
  assert(TRI->isTypeLegalForClass(*RC, MVT::i32) && "Invalid destination!");
  (void)TRI;
  unsigned mainDstReg = MRI.createVirtualRegister(RC);
  unsigned restoreDstReg = MRI.createVirtualRegister(RC);

  MemOpndSlot = CurOp;

  MVT PVT = getPointerTy(MF->getDataLayout());
  assert((PVT == MVT::i64 || PVT == MVT::i32) &&
         "Invalid Pointer Size!");

  // For v = setjmp(buf), we generate
  //
  // thisMBB:
  //  buf[LabelOffset] = restoreMBB <-- takes address of restoreMBB
  //  SjLjSetup restoreMBB
  //
  // mainMBB:
  //  v_main = 0
  //
  // sinkMBB:
  //  v = phi(main, restore)
  //
  // restoreMBB:
  //  if base pointer being used, load it from frame
  //  v_restore = 1

  MachineBasicBlock *thisMBB = MBB;
  MachineBasicBlock *mainMBB = MF->CreateMachineBasicBlock(BB);
  MachineBasicBlock *sinkMBB = MF->CreateMachineBasicBlock(BB);
  MachineBasicBlock *restoreMBB = MF->CreateMachineBasicBlock(BB);
  MF->insert(I, mainMBB);
  MF->insert(I, sinkMBB);
  MF->push_back(restoreMBB);
  restoreMBB->setHasAddressTaken();

  MachineInstrBuilder MIB;

  // Transfer the remainder of BB and its successor edges to sinkMBB.
  sinkMBB->splice(sinkMBB->begin(), MBB,
                  std::next(MachineBasicBlock::iterator(MI)), MBB->end());
  sinkMBB->transferSuccessorsAndUpdatePHIs(MBB);

  // thisMBB:
  unsigned PtrStoreOpc = 0;
  unsigned LabelReg = 0;
  const int64_t LabelOffset = 1 * PVT.getStoreSize();
  bool UseImmLabel = (MF->getTarget().getCodeModel() == CodeModel::Small) &&
                     !isPositionIndependent();

  // Prepare IP either in reg or imm.
  if (!UseImmLabel) {
    PtrStoreOpc = (PVT == MVT::i64) ? X86::MOV64mr : X86::MOV32mr;
    const TargetRegisterClass *PtrRC = getRegClassFor(PVT);
    LabelReg = MRI.createVirtualRegister(PtrRC);
    if (Subtarget.is64Bit()) {
      MIB = BuildMI(*thisMBB, MI, DL, TII->get(X86::LEA64r), LabelReg)
              .addReg(X86::RIP)
              .addImm(0)
              .addReg(0)
              .addMBB(restoreMBB)
              .addReg(0);
    } else {
      const X86InstrInfo *XII = static_cast<const X86InstrInfo*>(TII);
      MIB = BuildMI(*thisMBB, MI, DL, TII->get(X86::LEA32r), LabelReg)
              .addReg(XII->getGlobalBaseReg(MF))
              .addImm(0)
              .addReg(0)
              .addMBB(restoreMBB, Subtarget.classifyBlockAddressReference())
              .addReg(0);
    }
  } else
    PtrStoreOpc = (PVT == MVT::i64) ? X86::MOV64mi32 : X86::MOV32mi;
  // Store IP
  MIB = BuildMI(*thisMBB, MI, DL, TII->get(PtrStoreOpc));
  for (unsigned i = 0; i < X86::AddrNumOperands; ++i) {
    if (i == X86::AddrDisp)
      MIB.addDisp(MI.getOperand(MemOpndSlot + i), LabelOffset);
    else
      MIB.add(MI.getOperand(MemOpndSlot + i));
  }
  if (!UseImmLabel)
    MIB.addReg(LabelReg);
  else
    MIB.addMBB(restoreMBB);
  MIB.setMemRefs(MMOBegin, MMOEnd);
  // Setup
  MIB = BuildMI(*thisMBB, MI, DL, TII->get(X86::EH_SjLj_Setup))
          .addMBB(restoreMBB);

  const X86RegisterInfo *RegInfo = Subtarget.getRegisterInfo();
  MIB.addRegMask(RegInfo->getNoPreservedMask());
  thisMBB->addSuccessor(mainMBB);
  thisMBB->addSuccessor(restoreMBB);

  // mainMBB:
  //  EAX = 0
  BuildMI(mainMBB, DL, TII->get(X86::MOV32r0), mainDstReg);
  mainMBB->addSuccessor(sinkMBB);

  // sinkMBB:
  BuildMI(*sinkMBB, sinkMBB->begin(), DL,
          TII->get(X86::PHI), DstReg)
    .addReg(mainDstReg).addMBB(mainMBB)
    .addReg(restoreDstReg).addMBB(restoreMBB);

  // restoreMBB:
  if (RegInfo->hasBasePointer(*MF)) {
    const bool Uses64BitFramePtr =
        Subtarget.isTarget64BitLP64() || Subtarget.isTargetNaCl64();
    X86MachineFunctionInfo *X86FI = MF->getInfo<X86MachineFunctionInfo>();
    X86FI->setRestoreBasePointer(MF);
    unsigned FramePtr = RegInfo->getFrameRegister(*MF);
    unsigned BasePtr = RegInfo->getBaseRegister();
    unsigned Opm = Uses64BitFramePtr ? X86::MOV64rm : X86::MOV32rm;
    addRegOffset(BuildMI(restoreMBB, DL, TII->get(Opm), BasePtr),
                 FramePtr, true, X86FI->getRestoreBasePointerOffset())
      .setMIFlag(MachineInstr::FrameSetup);
  }
  BuildMI(restoreMBB, DL, TII->get(X86::MOV32ri), restoreDstReg).addImm(1);
  BuildMI(restoreMBB, DL, TII->get(X86::JMP_1)).addMBB(sinkMBB);
  restoreMBB->addSuccessor(sinkMBB);

  MI.eraseFromParent();
  return sinkMBB;
}

MachineBasicBlock *
X86TargetLowering::emitEHSjLjLongJmp(MachineInstr &MI,
                                     MachineBasicBlock *MBB) const {
  DebugLoc DL = MI.getDebugLoc();
  MachineFunction *MF = MBB->getParent();
  const TargetInstrInfo *TII = Subtarget.getInstrInfo();
  MachineRegisterInfo &MRI = MF->getRegInfo();

  // Memory Reference
  MachineInstr::mmo_iterator MMOBegin = MI.memoperands_begin();
  MachineInstr::mmo_iterator MMOEnd = MI.memoperands_end();

  MVT PVT = getPointerTy(MF->getDataLayout());
  assert((PVT == MVT::i64 || PVT == MVT::i32) &&
         "Invalid Pointer Size!");

  const TargetRegisterClass *RC =
    (PVT == MVT::i64) ? &X86::GR64RegClass : &X86::GR32RegClass;
  unsigned Tmp = MRI.createVirtualRegister(RC);
  // Since FP is only updated here but NOT referenced, it's treated as GPR.
  const X86RegisterInfo *RegInfo = Subtarget.getRegisterInfo();
  unsigned FP = (PVT == MVT::i64) ? X86::RBP : X86::EBP;
  unsigned SP = RegInfo->getStackRegister();

  MachineInstrBuilder MIB;

  const int64_t LabelOffset = 1 * PVT.getStoreSize();
  const int64_t SPOffset = 2 * PVT.getStoreSize();

  unsigned PtrLoadOpc = (PVT == MVT::i64) ? X86::MOV64rm : X86::MOV32rm;
  unsigned IJmpOpc = (PVT == MVT::i64) ? X86::JMP64r : X86::JMP32r;

  // Reload FP
  MIB = BuildMI(*MBB, MI, DL, TII->get(PtrLoadOpc), FP);
  for (unsigned i = 0; i < X86::AddrNumOperands; ++i)
    MIB.add(MI.getOperand(i));
  MIB.setMemRefs(MMOBegin, MMOEnd);
  // Reload IP
  MIB = BuildMI(*MBB, MI, DL, TII->get(PtrLoadOpc), Tmp);
  for (unsigned i = 0; i < X86::AddrNumOperands; ++i) {
    if (i == X86::AddrDisp)
      MIB.addDisp(MI.getOperand(i), LabelOffset);
    else
      MIB.add(MI.getOperand(i));
  }
  MIB.setMemRefs(MMOBegin, MMOEnd);
  // Reload SP
  MIB = BuildMI(*MBB, MI, DL, TII->get(PtrLoadOpc), SP);
  for (unsigned i = 0; i < X86::AddrNumOperands; ++i) {
    if (i == X86::AddrDisp)
      MIB.addDisp(MI.getOperand(i), SPOffset);
    else
      MIB.add(MI.getOperand(i));
  }
  MIB.setMemRefs(MMOBegin, MMOEnd);
  // Jump
  BuildMI(*MBB, MI, DL, TII->get(IJmpOpc)).addReg(Tmp);

  MI.eraseFromParent();
  return MBB;
}

void X86TargetLowering::SetupEntryBlockForSjLj(MachineInstr &MI,
                                               MachineBasicBlock *MBB,
                                               MachineBasicBlock *DispatchBB,
                                               int FI) const {
  DebugLoc DL = MI.getDebugLoc();
  MachineFunction *MF = MBB->getParent();
  MachineRegisterInfo *MRI = &MF->getRegInfo();
  const X86InstrInfo *TII = Subtarget.getInstrInfo();

  MVT PVT = getPointerTy(MF->getDataLayout());
  assert((PVT == MVT::i64 || PVT == MVT::i32) && "Invalid Pointer Size!");

  unsigned Op = 0;
  unsigned VR = 0;

  bool UseImmLabel = (MF->getTarget().getCodeModel() == CodeModel::Small) &&
                     !isPositionIndependent();

  if (UseImmLabel) {
    Op = (PVT == MVT::i64) ? X86::MOV64mi32 : X86::MOV32mi;
  } else {
    const TargetRegisterClass *TRC =
        (PVT == MVT::i64) ? &X86::GR64RegClass : &X86::GR32RegClass;
    VR = MRI->createVirtualRegister(TRC);
    Op = (PVT == MVT::i64) ? X86::MOV64mr : X86::MOV32mr;

    if (Subtarget.is64Bit())
      BuildMI(*MBB, MI, DL, TII->get(X86::LEA64r), VR)
          .addReg(X86::RIP)
          .addImm(1)
          .addReg(0)
          .addMBB(DispatchBB)
          .addReg(0);
    else
      BuildMI(*MBB, MI, DL, TII->get(X86::LEA32r), VR)
          .addReg(0) /* TII->getGlobalBaseReg(MF) */
          .addImm(1)
          .addReg(0)
          .addMBB(DispatchBB, Subtarget.classifyBlockAddressReference())
          .addReg(0);
  }

  MachineInstrBuilder MIB = BuildMI(*MBB, MI, DL, TII->get(Op));
  addFrameReference(MIB, FI, Subtarget.is64Bit() ? 56 : 36);
  if (UseImmLabel)
    MIB.addMBB(DispatchBB);
  else
    MIB.addReg(VR);
}

MachineBasicBlock *
X86TargetLowering::EmitSjLjDispatchBlock(MachineInstr &MI,
                                         MachineBasicBlock *BB) const {
  DebugLoc DL = MI.getDebugLoc();
  MachineFunction *MF = BB->getParent();
  MachineFrameInfo &MFI = MF->getFrameInfo();
  MachineRegisterInfo *MRI = &MF->getRegInfo();
  const X86InstrInfo *TII = Subtarget.getInstrInfo();
  int FI = MFI.getFunctionContextIndex();

  // Get a mapping of the call site numbers to all of the landing pads they're
  // associated with.
  DenseMap<unsigned, SmallVector<MachineBasicBlock *, 2>> CallSiteNumToLPad;
  unsigned MaxCSNum = 0;
  for (auto &MBB : *MF) {
    if (!MBB.isEHPad())
      continue;

    MCSymbol *Sym = nullptr;
    for (const auto &MI : MBB) {
      if (MI.isDebugValue())
        continue;

      assert(MI.isEHLabel() && "expected EH_LABEL");
      Sym = MI.getOperand(0).getMCSymbol();
      break;
    }

    if (!MF->hasCallSiteLandingPad(Sym))
      continue;

    for (unsigned CSI : MF->getCallSiteLandingPad(Sym)) {
      CallSiteNumToLPad[CSI].push_back(&MBB);
      MaxCSNum = std::max(MaxCSNum, CSI);
    }
  }

  // Get an ordered list of the machine basic blocks for the jump table.
  std::vector<MachineBasicBlock *> LPadList;
  SmallPtrSet<MachineBasicBlock *, 32> InvokeBBs;
  LPadList.reserve(CallSiteNumToLPad.size());

  for (unsigned CSI = 1; CSI <= MaxCSNum; ++CSI) {
    for (auto &LP : CallSiteNumToLPad[CSI]) {
      LPadList.push_back(LP);
      InvokeBBs.insert(LP->pred_begin(), LP->pred_end());
    }
  }

  assert(!LPadList.empty() &&
         "No landing pad destinations for the dispatch jump table!");

  // Create the MBBs for the dispatch code.

  // Shove the dispatch's address into the return slot in the function context.
  MachineBasicBlock *DispatchBB = MF->CreateMachineBasicBlock();
  DispatchBB->setIsEHPad(true);

  MachineBasicBlock *TrapBB = MF->CreateMachineBasicBlock();
  BuildMI(TrapBB, DL, TII->get(X86::TRAP));
  DispatchBB->addSuccessor(TrapBB);

  MachineBasicBlock *DispContBB = MF->CreateMachineBasicBlock();
  DispatchBB->addSuccessor(DispContBB);

  // Insert MBBs.
  MF->push_back(DispatchBB);
  MF->push_back(DispContBB);
  MF->push_back(TrapBB);

  // Insert code into the entry block that creates and registers the function
  // context.
  SetupEntryBlockForSjLj(MI, BB, DispatchBB, FI);

  // Create the jump table and associated information
  unsigned JTE = getJumpTableEncoding();
  MachineJumpTableInfo *JTI = MF->getOrCreateJumpTableInfo(JTE);
  unsigned MJTI = JTI->createJumpTableIndex(LPadList);

  const X86RegisterInfo &RI = TII->getRegisterInfo();
  // Add a register mask with no preserved registers.  This results in all
  // registers being marked as clobbered.
  if (RI.hasBasePointer(*MF)) {
    const bool FPIs64Bit =
        Subtarget.isTarget64BitLP64() || Subtarget.isTargetNaCl64();
    X86MachineFunctionInfo *MFI = MF->getInfo<X86MachineFunctionInfo>();
    MFI->setRestoreBasePointer(MF);

    unsigned FP = RI.getFrameRegister(*MF);
    unsigned BP = RI.getBaseRegister();
    unsigned Op = FPIs64Bit ? X86::MOV64rm : X86::MOV32rm;
    addRegOffset(BuildMI(DispatchBB, DL, TII->get(Op), BP), FP, true,
                 MFI->getRestoreBasePointerOffset())
        .addRegMask(RI.getNoPreservedMask());
  } else {
    BuildMI(DispatchBB, DL, TII->get(X86::NOOP))
        .addRegMask(RI.getNoPreservedMask());
  }

  // IReg is used as an index in a memory operand and therefore can't be SP
  unsigned IReg = MRI->createVirtualRegister(&X86::GR32_NOSPRegClass);
  addFrameReference(BuildMI(DispatchBB, DL, TII->get(X86::MOV32rm), IReg), FI,
                    Subtarget.is64Bit() ? 8 : 4);
  BuildMI(DispatchBB, DL, TII->get(X86::CMP32ri))
      .addReg(IReg)
      .addImm(LPadList.size());
  BuildMI(DispatchBB, DL, TII->get(X86::JAE_1)).addMBB(TrapBB);

  if (Subtarget.is64Bit()) {
    unsigned BReg = MRI->createVirtualRegister(&X86::GR64RegClass);
    unsigned IReg64 = MRI->createVirtualRegister(&X86::GR64_NOSPRegClass);

    // leaq .LJTI0_0(%rip), BReg
    BuildMI(DispContBB, DL, TII->get(X86::LEA64r), BReg)
        .addReg(X86::RIP)
        .addImm(1)
        .addReg(0)
        .addJumpTableIndex(MJTI)
        .addReg(0);
    // movzx IReg64, IReg
    BuildMI(DispContBB, DL, TII->get(TargetOpcode::SUBREG_TO_REG), IReg64)
        .addImm(0)
        .addReg(IReg)
        .addImm(X86::sub_32bit);

    switch (JTE) {
    case MachineJumpTableInfo::EK_BlockAddress:
      // jmpq *(BReg,IReg64,8)
      BuildMI(DispContBB, DL, TII->get(X86::JMP64m))
          .addReg(BReg)
          .addImm(8)
          .addReg(IReg64)
          .addImm(0)
          .addReg(0);
      break;
    case MachineJumpTableInfo::EK_LabelDifference32: {
      unsigned OReg = MRI->createVirtualRegister(&X86::GR32RegClass);
      unsigned OReg64 = MRI->createVirtualRegister(&X86::GR64RegClass);
      unsigned TReg = MRI->createVirtualRegister(&X86::GR64RegClass);

      // movl (BReg,IReg64,4), OReg
      BuildMI(DispContBB, DL, TII->get(X86::MOV32rm), OReg)
          .addReg(BReg)
          .addImm(4)
          .addReg(IReg64)
          .addImm(0)
          .addReg(0);
      // movsx OReg64, OReg
      BuildMI(DispContBB, DL, TII->get(X86::MOVSX64rr32), OReg64).addReg(OReg);
      // addq BReg, OReg64, TReg
      BuildMI(DispContBB, DL, TII->get(X86::ADD64rr), TReg)
          .addReg(OReg64)
          .addReg(BReg);
      // jmpq *TReg
      BuildMI(DispContBB, DL, TII->get(X86::JMP64r)).addReg(TReg);
      break;
    }
    default:
      llvm_unreachable("Unexpected jump table encoding");
    }
  } else {
    // jmpl *.LJTI0_0(,IReg,4)
    BuildMI(DispContBB, DL, TII->get(X86::JMP32m))
        .addReg(0)
        .addImm(4)
        .addReg(IReg)
        .addJumpTableIndex(MJTI)
        .addReg(0);
  }

  // Add the jump table entries as successors to the MBB.
  SmallPtrSet<MachineBasicBlock *, 8> SeenMBBs;
  for (auto &LP : LPadList)
    if (SeenMBBs.insert(LP).second)
      DispContBB->addSuccessor(LP);

  // N.B. the order the invoke BBs are processed in doesn't matter here.
  SmallVector<MachineBasicBlock *, 64> MBBLPads;
  const MCPhysReg *SavedRegs = MF->getRegInfo().getCalleeSavedRegs();
  for (MachineBasicBlock *MBB : InvokeBBs) {
    // Remove the landing pad successor from the invoke block and replace it
    // with the new dispatch block.
    // Keep a copy of Successors since it's modified inside the loop.
    SmallVector<MachineBasicBlock *, 8> Successors(MBB->succ_rbegin(),
                                                   MBB->succ_rend());
    // FIXME: Avoid quadratic complexity.
    for (auto MBBS : Successors) {
      if (MBBS->isEHPad()) {
        MBB->removeSuccessor(MBBS);
        MBBLPads.push_back(MBBS);
      }
    }

    MBB->addSuccessor(DispatchBB);

    // Find the invoke call and mark all of the callee-saved registers as
    // 'implicit defined' so that they're spilled.  This prevents code from
    // moving instructions to before the EH block, where they will never be
    // executed.
    for (auto &II : reverse(*MBB)) {
      if (!II.isCall())
        continue;

      DenseMap<unsigned, bool> DefRegs;
      for (auto &MOp : II.operands())
        if (MOp.isReg())
          DefRegs[MOp.getReg()] = true;

      MachineInstrBuilder MIB(*MF, &II);
      for (unsigned RI = 0; SavedRegs[RI]; ++RI) {
        unsigned Reg = SavedRegs[RI];
        if (!DefRegs[Reg])
          MIB.addReg(Reg, RegState::ImplicitDefine | RegState::Dead);
      }

      break;
    }
  }

  // Mark all former landing pads as non-landing pads.  The dispatch is the only
  // landing pad now.
  for (auto &LP : MBBLPads)
    LP->setIsEHPad(false);

  // The instruction is gone now.
  MI.eraseFromParent();
  return BB;
}

MachineBasicBlock *
X86TargetLowering::EmitInstrWithCustomInserter(MachineInstr &MI,
                                               MachineBasicBlock *BB) const {
  MachineFunction *MF = BB->getParent();
  const TargetInstrInfo *TII = Subtarget.getInstrInfo();
  DebugLoc DL = MI.getDebugLoc();

  switch (MI.getOpcode()) {
  default: llvm_unreachable("Unexpected instr type to insert");
  case X86::TAILJMPd64:
  case X86::TAILJMPr64:
  case X86::TAILJMPm64:
  case X86::TAILJMPr64_REX:
  case X86::TAILJMPm64_REX:
    llvm_unreachable("TAILJMP64 would not be touched here.");
  case X86::TCRETURNdi64:
  case X86::TCRETURNri64:
  case X86::TCRETURNmi64:
    return BB;
  case X86::TLS_addr32:
  case X86::TLS_addr64:
  case X86::TLS_base_addr32:
  case X86::TLS_base_addr64:
    return EmitLoweredTLSAddr(MI, BB);
  case X86::CATCHRET:
    return EmitLoweredCatchRet(MI, BB);
  case X86::CATCHPAD:
    return EmitLoweredCatchPad(MI, BB);
  case X86::SEG_ALLOCA_32:
  case X86::SEG_ALLOCA_64:
    return EmitLoweredSegAlloca(MI, BB);
  case X86::TLSCall_32:
  case X86::TLSCall_64:
    return EmitLoweredTLSCall(MI, BB);
  case X86::CMOV_FR32:
  case X86::CMOV_FR64:
  case X86::CMOV_FR128:
  case X86::CMOV_GR8:
  case X86::CMOV_GR16:
  case X86::CMOV_GR32:
  case X86::CMOV_RFP32:
  case X86::CMOV_RFP64:
  case X86::CMOV_RFP80:
  case X86::CMOV_V2F64:
  case X86::CMOV_V2I64:
  case X86::CMOV_V4F32:
  case X86::CMOV_V4F64:
  case X86::CMOV_V4I64:
  case X86::CMOV_V16F32:
  case X86::CMOV_V8F32:
  case X86::CMOV_V8F64:
  case X86::CMOV_V8I64:
  case X86::CMOV_V8I1:
  case X86::CMOV_V16I1:
  case X86::CMOV_V32I1:
  case X86::CMOV_V64I1:
    return EmitLoweredSelect(MI, BB);

  case X86::RDFLAGS32:
  case X86::RDFLAGS64: {
    unsigned PushF =
        MI.getOpcode() == X86::RDFLAGS32 ? X86::PUSHF32 : X86::PUSHF64;
    unsigned Pop = MI.getOpcode() == X86::RDFLAGS32 ? X86::POP32r : X86::POP64r;
    MachineInstr *Push = BuildMI(*BB, MI, DL, TII->get(PushF));
    // Permit reads of the FLAGS register without it being defined.
    // This intrinsic exists to read external processor state in flags, such as
    // the trap flag, interrupt flag, and direction flag, none of which are
    // modeled by the backend.
    Push->getOperand(2).setIsUndef();
    BuildMI(*BB, MI, DL, TII->get(Pop), MI.getOperand(0).getReg());

    MI.eraseFromParent(); // The pseudo is gone now.
    return BB;
  }

  case X86::WRFLAGS32:
  case X86::WRFLAGS64: {
    unsigned Push =
        MI.getOpcode() == X86::WRFLAGS32 ? X86::PUSH32r : X86::PUSH64r;
    unsigned PopF =
        MI.getOpcode() == X86::WRFLAGS32 ? X86::POPF32 : X86::POPF64;
    BuildMI(*BB, MI, DL, TII->get(Push)).addReg(MI.getOperand(0).getReg());
    BuildMI(*BB, MI, DL, TII->get(PopF));

    MI.eraseFromParent(); // The pseudo is gone now.
    return BB;
  }

  case X86::RELEASE_FADD32mr:
  case X86::RELEASE_FADD64mr:
    return EmitLoweredAtomicFP(MI, BB);

  case X86::FP32_TO_INT16_IN_MEM:
  case X86::FP32_TO_INT32_IN_MEM:
  case X86::FP32_TO_INT64_IN_MEM:
  case X86::FP64_TO_INT16_IN_MEM:
  case X86::FP64_TO_INT32_IN_MEM:
  case X86::FP64_TO_INT64_IN_MEM:
  case X86::FP80_TO_INT16_IN_MEM:
  case X86::FP80_TO_INT32_IN_MEM:
  case X86::FP80_TO_INT64_IN_MEM: {
    // Change the floating point control register to use "round towards zero"
    // mode when truncating to an integer value.
    int CWFrameIdx = MF->getFrameInfo().CreateStackObject(2, 2, false);
    addFrameReference(BuildMI(*BB, MI, DL,
                              TII->get(X86::FNSTCW16m)), CWFrameIdx);

    // Load the old value of the high byte of the control word...
    unsigned OldCW =
      MF->getRegInfo().createVirtualRegister(&X86::GR16RegClass);
    addFrameReference(BuildMI(*BB, MI, DL, TII->get(X86::MOV16rm), OldCW),
                      CWFrameIdx);

    // Set the high part to be round to zero...
    addFrameReference(BuildMI(*BB, MI, DL, TII->get(X86::MOV16mi)), CWFrameIdx)
      .addImm(0xC7F);

    // Reload the modified control word now...
    addFrameReference(BuildMI(*BB, MI, DL,
                              TII->get(X86::FLDCW16m)), CWFrameIdx);

    // Restore the memory image of control word to original value
    addFrameReference(BuildMI(*BB, MI, DL, TII->get(X86::MOV16mr)), CWFrameIdx)
      .addReg(OldCW);

    // Get the X86 opcode to use.
    unsigned Opc;
    switch (MI.getOpcode()) {
    default: llvm_unreachable("illegal opcode!");
    case X86::FP32_TO_INT16_IN_MEM: Opc = X86::IST_Fp16m32; break;
    case X86::FP32_TO_INT32_IN_MEM: Opc = X86::IST_Fp32m32; break;
    case X86::FP32_TO_INT64_IN_MEM: Opc = X86::IST_Fp64m32; break;
    case X86::FP64_TO_INT16_IN_MEM: Opc = X86::IST_Fp16m64; break;
    case X86::FP64_TO_INT32_IN_MEM: Opc = X86::IST_Fp32m64; break;
    case X86::FP64_TO_INT64_IN_MEM: Opc = X86::IST_Fp64m64; break;
    case X86::FP80_TO_INT16_IN_MEM: Opc = X86::IST_Fp16m80; break;
    case X86::FP80_TO_INT32_IN_MEM: Opc = X86::IST_Fp32m80; break;
    case X86::FP80_TO_INT64_IN_MEM: Opc = X86::IST_Fp64m80; break;
    }

    X86AddressMode AM = getAddressFromInstr(&MI, 0);
    addFullAddress(BuildMI(*BB, MI, DL, TII->get(Opc)), AM)
        .addReg(MI.getOperand(X86::AddrNumOperands).getReg());

    // Reload the original control word now.
    addFrameReference(BuildMI(*BB, MI, DL,
                              TII->get(X86::FLDCW16m)), CWFrameIdx);

    MI.eraseFromParent(); // The pseudo instruction is gone now.
    return BB;
  }
    // String/text processing lowering.
  case X86::PCMPISTRM128REG:
  case X86::VPCMPISTRM128REG:
  case X86::PCMPISTRM128MEM:
  case X86::VPCMPISTRM128MEM:
  case X86::PCMPESTRM128REG:
  case X86::VPCMPESTRM128REG:
  case X86::PCMPESTRM128MEM:
  case X86::VPCMPESTRM128MEM:
    assert(Subtarget.hasSSE42() &&
           "Target must have SSE4.2 or AVX features enabled");
    return emitPCMPSTRM(MI, BB, Subtarget.getInstrInfo());

  // String/text processing lowering.
  case X86::PCMPISTRIREG:
  case X86::VPCMPISTRIREG:
  case X86::PCMPISTRIMEM:
  case X86::VPCMPISTRIMEM:
  case X86::PCMPESTRIREG:
  case X86::VPCMPESTRIREG:
  case X86::PCMPESTRIMEM:
  case X86::VPCMPESTRIMEM:
    assert(Subtarget.hasSSE42() &&
           "Target must have SSE4.2 or AVX features enabled");
    return emitPCMPSTRI(MI, BB, Subtarget.getInstrInfo());

  // Thread synchronization.
  case X86::MONITOR:
    return emitMonitor(MI, BB, Subtarget, X86::MONITORrrr);
  case X86::MONITORX:
    return emitMonitor(MI, BB, Subtarget, X86::MONITORXrrr);

  // Cache line zero
  case X86::CLZERO:
    return emitClzero(&MI, BB, Subtarget);

  // PKU feature
  case X86::WRPKRU:
    return emitWRPKRU(MI, BB, Subtarget);
  case X86::RDPKRU:
    return emitRDPKRU(MI, BB, Subtarget);
  // xbegin
  case X86::XBEGIN:
    return emitXBegin(MI, BB, Subtarget.getInstrInfo());

  case X86::VASTART_SAVE_XMM_REGS:
    return EmitVAStartSaveXMMRegsWithCustomInserter(MI, BB);

  case X86::VAARG_64:
    return EmitVAARG64WithCustomInserter(MI, BB);

  case X86::EH_SjLj_SetJmp32:
  case X86::EH_SjLj_SetJmp64:
    return emitEHSjLjSetJmp(MI, BB);

  case X86::EH_SjLj_LongJmp32:
  case X86::EH_SjLj_LongJmp64:
    return emitEHSjLjLongJmp(MI, BB);

  case X86::Int_eh_sjlj_setup_dispatch:
    return EmitSjLjDispatchBlock(MI, BB);

  case TargetOpcode::STATEPOINT:
    // As an implementation detail, STATEPOINT shares the STACKMAP format at
    // this point in the process.  We diverge later.
    return emitPatchPoint(MI, BB);

  case TargetOpcode::STACKMAP:
  case TargetOpcode::PATCHPOINT:
    return emitPatchPoint(MI, BB);

  case TargetOpcode::PATCHABLE_EVENT_CALL:
    // Do nothing here, handle in xray instrumentation pass.
    return BB;

  case X86::LCMPXCHG8B: {
    const X86RegisterInfo *TRI = Subtarget.getRegisterInfo();
    // In addition to 4 E[ABCD] registers implied by encoding, CMPXCHG8B
    // requires a memory operand. If it happens that current architecture is
    // i686 and for current function we need a base pointer
    // - which is ESI for i686 - register allocator would not be able to
    // allocate registers for an address in form of X(%reg, %reg, Y)
    // - there never would be enough unreserved registers during regalloc
    // (without the need for base ptr the only option would be X(%edi, %esi, Y).
    // We are giving a hand to register allocator by precomputing the address in
    // a new vreg using LEA.

    // If it is not i686 or there is no base pointer - nothing to do here.
    if (!Subtarget.is32Bit() || !TRI->hasBasePointer(*MF))
      return BB;

    // Even though this code does not necessarily needs the base pointer to
    // be ESI, we check for that. The reason: if this assert fails, there are
    // some changes happened in the compiler base pointer handling, which most
    // probably have to be addressed somehow here.
    assert(TRI->getBaseRegister() == X86::ESI &&
           "LCMPXCHG8B custom insertion for i686 is written with X86::ESI as a "
           "base pointer in mind");

    MachineRegisterInfo &MRI = MF->getRegInfo();
    MVT SPTy = getPointerTy(MF->getDataLayout());
    const TargetRegisterClass *AddrRegClass = getRegClassFor(SPTy);
    unsigned computedAddrVReg = MRI.createVirtualRegister(AddrRegClass);

    X86AddressMode AM = getAddressFromInstr(&MI, 0);
    // Regalloc does not need any help when the memory operand of CMPXCHG8B
    // does not use index register.
    if (AM.IndexReg == X86::NoRegister)
      return BB;

    // After X86TargetLowering::ReplaceNodeResults CMPXCHG8B is glued to its
    // four operand definitions that are E[ABCD] registers. We skip them and
    // then insert the LEA.
    MachineBasicBlock::iterator MBBI(MI);
    while (MBBI->definesRegister(X86::EAX) || MBBI->definesRegister(X86::EBX) ||
           MBBI->definesRegister(X86::ECX) || MBBI->definesRegister(X86::EDX))
      --MBBI;
    addFullAddress(
        BuildMI(*BB, *MBBI, DL, TII->get(X86::LEA32r), computedAddrVReg), AM);

    setDirectAddressInInstr(&MI, 0, computedAddrVReg);

    return BB;
  }
  case X86::LCMPXCHG16B:
    return BB;
  case X86::LCMPXCHG8B_SAVE_EBX:
  case X86::LCMPXCHG16B_SAVE_RBX: {
    unsigned BasePtr =
        MI.getOpcode() == X86::LCMPXCHG8B_SAVE_EBX ? X86::EBX : X86::RBX;
    if (!BB->isLiveIn(BasePtr))
      BB->addLiveIn(BasePtr);
    return BB;
  }
  }
}

//===----------------------------------------------------------------------===//
//                           X86 Optimization Hooks
//===----------------------------------------------------------------------===//

void X86TargetLowering::computeKnownBitsForTargetNode(const SDValue Op,
                                                      KnownBits &Known,
                                                      const APInt &DemandedElts,
                                                      const SelectionDAG &DAG,
                                                      unsigned Depth) const {
  unsigned BitWidth = Known.getBitWidth();
  unsigned Opc = Op.getOpcode();
  EVT VT = Op.getValueType();
  assert((Opc >= ISD::BUILTIN_OP_END ||
          Opc == ISD::INTRINSIC_WO_CHAIN ||
          Opc == ISD::INTRINSIC_W_CHAIN ||
          Opc == ISD::INTRINSIC_VOID) &&
         "Should use MaskedValueIsZero if you don't know whether Op"
         " is a target node!");

  Known.resetAll();
  switch (Opc) {
  default: break;
  case X86ISD::SETCC:
    Known.Zero.setBitsFrom(1);
    break;
  case X86ISD::MOVMSK: {
    unsigned NumLoBits = Op.getOperand(0).getValueType().getVectorNumElements();
    Known.Zero.setBitsFrom(NumLoBits);
    break;
  }
  case X86ISD::PEXTRB:
  case X86ISD::PEXTRW: {
    SDValue Src = Op.getOperand(0);
    EVT SrcVT = Src.getValueType();
    APInt DemandedElt = APInt::getOneBitSet(SrcVT.getVectorNumElements(),
                                            Op.getConstantOperandVal(1));
    DAG.computeKnownBits(Src, Known, DemandedElt, Depth + 1);
    Known = Known.zextOrTrunc(BitWidth);
    Known.Zero.setBitsFrom(SrcVT.getScalarSizeInBits());
    break;
  }
  case X86ISD::VSHLI:
  case X86ISD::VSRLI: {
    if (auto *ShiftImm = dyn_cast<ConstantSDNode>(Op.getOperand(1))) {
      if (ShiftImm->getAPIntValue().uge(VT.getScalarSizeInBits())) {
        Known.setAllZero();
        break;
      }

      DAG.computeKnownBits(Op.getOperand(0), Known, DemandedElts, Depth + 1);
      unsigned ShAmt = ShiftImm->getZExtValue();
      if (Opc == X86ISD::VSHLI) {
        Known.Zero <<= ShAmt;
        Known.One <<= ShAmt;
        // Low bits are known zero.
        Known.Zero.setLowBits(ShAmt);
      } else {
        Known.Zero.lshrInPlace(ShAmt);
        Known.One.lshrInPlace(ShAmt);
        // High bits are known zero.
        Known.Zero.setHighBits(ShAmt);
      }
    }
    break;
  }
  case X86ISD::VZEXT: {
    // TODO: Add DemandedElts support.
    SDValue N0 = Op.getOperand(0);
    unsigned NumElts = VT.getVectorNumElements();

    EVT SrcVT = N0.getValueType();
    unsigned InNumElts = SrcVT.getVectorNumElements();
    unsigned InBitWidth = SrcVT.getScalarSizeInBits();
    assert(InNumElts >= NumElts && "Illegal VZEXT input");

    Known = KnownBits(InBitWidth);
    APInt DemandedSrcElts = APInt::getLowBitsSet(InNumElts, NumElts);
    DAG.computeKnownBits(N0, Known, DemandedSrcElts, Depth + 1);
    Known = Known.zext(BitWidth);
    Known.Zero.setBitsFrom(InBitWidth);
    break;
  }
  case X86ISD::CMOV: {
    DAG.computeKnownBits(Op.getOperand(1), Known, Depth+1);
    // If we don't know any bits, early out.
    if (Known.isUnknown())
      break;
    KnownBits Known2;
    DAG.computeKnownBits(Op.getOperand(0), Known2, Depth+1);

    // Only known if known in both the LHS and RHS.
    Known.One &= Known2.One;
    Known.Zero &= Known2.Zero;
    break;
  }
  case X86ISD::UDIVREM8_ZEXT_HREG:
    // TODO: Support more than just the zero extended bits?
    if (Op.getResNo() != 1)
      break;
    // The remainder is zero extended.
    Known.Zero.setBitsFrom(8);
    break;
  }
}

unsigned X86TargetLowering::ComputeNumSignBitsForTargetNode(
    SDValue Op, const APInt &DemandedElts, const SelectionDAG &DAG,
    unsigned Depth) const {
  unsigned VTBits = Op.getScalarValueSizeInBits();
  unsigned Opcode = Op.getOpcode();
  switch (Opcode) {
  case X86ISD::SETCC_CARRY:
    // SETCC_CARRY sets the dest to ~0 for true or 0 for false.
    return VTBits;

  case X86ISD::VSEXT: {
    // TODO: Add DemandedElts support.
    SDValue Src = Op.getOperand(0);
    unsigned Tmp = DAG.ComputeNumSignBits(Src, Depth + 1);
    Tmp += VTBits - Src.getScalarValueSizeInBits();
    return Tmp;
  }

  case X86ISD::VTRUNC: {
    // TODO: Add DemandedElts support.
    SDValue Src = Op.getOperand(0);
    unsigned NumSrcBits = Src.getScalarValueSizeInBits();
    assert(VTBits < NumSrcBits && "Illegal truncation input type");
    unsigned Tmp = DAG.ComputeNumSignBits(Src, Depth + 1);
    if (Tmp > (NumSrcBits - VTBits))
      return Tmp - (NumSrcBits - VTBits);
    return 1;
  }

  case X86ISD::PACKSS: {
    // PACKSS is just a truncation if the sign bits extend to the packed size.
    // TODO: Add DemandedElts support.
    unsigned SrcBits = Op.getOperand(0).getScalarValueSizeInBits();
    unsigned Tmp0 = DAG.ComputeNumSignBits(Op.getOperand(0), Depth + 1);
    unsigned Tmp1 = DAG.ComputeNumSignBits(Op.getOperand(1), Depth + 1);
    unsigned Tmp = std::min(Tmp0, Tmp1);
    if (Tmp > (SrcBits - VTBits))
      return Tmp - (SrcBits - VTBits);
    return 1;
  }

  case X86ISD::VSHLI: {
    SDValue Src = Op.getOperand(0);
    APInt ShiftVal = cast<ConstantSDNode>(Op.getOperand(1))->getAPIntValue();
    if (ShiftVal.uge(VTBits))
      return VTBits; // Shifted all bits out --> zero.
    unsigned Tmp = DAG.ComputeNumSignBits(Src, DemandedElts, Depth + 1);
    if (ShiftVal.uge(Tmp))
      return 1; // Shifted all sign bits out --> unknown.
    return Tmp - ShiftVal.getZExtValue();
  }

  case X86ISD::VSRAI: {
    SDValue Src = Op.getOperand(0);
    APInt ShiftVal = cast<ConstantSDNode>(Op.getOperand(1))->getAPIntValue();
    if (ShiftVal.uge(VTBits - 1))
      return VTBits; // Sign splat.
    unsigned Tmp = DAG.ComputeNumSignBits(Src, DemandedElts, Depth + 1);
    ShiftVal += Tmp;
    return ShiftVal.uge(VTBits) ? VTBits : ShiftVal.getZExtValue();
  }

  case X86ISD::PCMPGT:
  case X86ISD::PCMPEQ:
  case X86ISD::CMPP:
  case X86ISD::VPCOM:
  case X86ISD::VPCOMU:
    // Vector compares return zero/all-bits result values.
    return VTBits;

  case X86ISD::CMOV: {
    unsigned Tmp0 = DAG.ComputeNumSignBits(Op.getOperand(0), Depth+1);
    if (Tmp0 == 1) return 1;  // Early out.
    unsigned Tmp1 = DAG.ComputeNumSignBits(Op.getOperand(1), Depth+1);
    return std::min(Tmp0, Tmp1);
  }
  case X86ISD::SDIVREM8_SEXT_HREG:
    // TODO: Support more than just the sign extended bits?
    if (Op.getResNo() != 1)
      break;
    // The remainder is sign extended.
    return VTBits - 7;
  }

  // Fallback case.
  return 1;
}

SDValue X86TargetLowering::unwrapAddress(SDValue N) const {
  if (N->getOpcode() == X86ISD::Wrapper || N->getOpcode() == X86ISD::WrapperRIP)
    return N->getOperand(0);
  return N;
}

/// Returns true (and the GlobalValue and the offset) if the node is a
/// GlobalAddress + offset.
bool X86TargetLowering::isGAPlusOffset(SDNode *N,
                                       const GlobalValue* &GA,
                                       int64_t &Offset) const {
  if (N->getOpcode() == X86ISD::Wrapper) {
    if (isa<GlobalAddressSDNode>(N->getOperand(0))) {
      GA = cast<GlobalAddressSDNode>(N->getOperand(0))->getGlobal();
      Offset = cast<GlobalAddressSDNode>(N->getOperand(0))->getOffset();
      return true;
    }
  }
  return TargetLowering::isGAPlusOffset(N, GA, Offset);
}

// Attempt to match a combined shuffle mask against supported unary shuffle
// instructions.
// TODO: Investigate sharing more of this with shuffle lowering.
static bool matchUnaryVectorShuffle(MVT MaskVT, ArrayRef<int> Mask,
                                    bool AllowFloatDomain, bool AllowIntDomain,
                                    SDValue &V1, SDLoc &DL, SelectionDAG &DAG,
                                    const X86Subtarget &Subtarget,
                                    unsigned &Shuffle, MVT &SrcVT, MVT &DstVT) {
  unsigned NumMaskElts = Mask.size();
  unsigned MaskEltSize = MaskVT.getScalarSizeInBits();

  // Match against a ZERO_EXTEND_VECTOR_INREG/VZEXT instruction.
  // TODO: Add 512-bit vector support (split AVX512F and AVX512BW).
  if (AllowIntDomain && ((MaskVT.is128BitVector() && Subtarget.hasSSE41()) ||
                         (MaskVT.is256BitVector() && Subtarget.hasInt256()))) {
    unsigned MaxScale = 64 / MaskEltSize;
    for (unsigned Scale = 2; Scale <= MaxScale; Scale *= 2) {
      bool Match = true;
      unsigned NumDstElts = NumMaskElts / Scale;
      for (unsigned i = 0; i != NumDstElts && Match; ++i) {
        Match &= isUndefOrEqual(Mask[i * Scale], (int)i);
        Match &= isUndefOrZeroInRange(Mask, (i * Scale) + 1, Scale - 1);
      }
      if (Match) {
        unsigned SrcSize = std::max(128u, NumDstElts * MaskEltSize);
        MVT ScalarTy = MaskVT.isInteger() ? MaskVT.getScalarType() :
                                            MVT::getIntegerVT(MaskEltSize);
        SrcVT = MVT::getVectorVT(ScalarTy, SrcSize / MaskEltSize);

        if (SrcVT.getSizeInBits() != MaskVT.getSizeInBits()) {
          V1 = extractSubVector(V1, 0, DAG, DL, SrcSize);
          Shuffle = unsigned(X86ISD::VZEXT);
        } else
          Shuffle = unsigned(ISD::ZERO_EXTEND_VECTOR_INREG);

        DstVT = MVT::getIntegerVT(Scale * MaskEltSize);
        DstVT = MVT::getVectorVT(DstVT, NumDstElts);
        return true;
      }
    }
  }

  // Match against a VZEXT_MOVL instruction, SSE1 only supports 32-bits (MOVSS).
  if (((MaskEltSize == 32) || (MaskEltSize == 64 && Subtarget.hasSSE2())) &&
      isUndefOrEqual(Mask[0], 0) &&
      isUndefOrZeroInRange(Mask, 1, NumMaskElts - 1)) {
    Shuffle = X86ISD::VZEXT_MOVL;
    SrcVT = DstVT = !Subtarget.hasSSE2() ? MVT::v4f32 : MaskVT;
    return true;
  }

  // Check if we have SSE3 which will let us use MOVDDUP etc. The
  // instructions are no slower than UNPCKLPD but has the option to
  // fold the input operand into even an unaligned memory load.
  if (MaskVT.is128BitVector() && Subtarget.hasSSE3() && AllowFloatDomain) {
    if (!Subtarget.hasAVX2() && isTargetShuffleEquivalent(Mask, {0, 0})) {
      Shuffle = X86ISD::MOVDDUP;
      SrcVT = DstVT = MVT::v2f64;
      return true;
    }
    if (isTargetShuffleEquivalent(Mask, {0, 0, 2, 2})) {
      Shuffle = X86ISD::MOVSLDUP;
      SrcVT = DstVT = MVT::v4f32;
      return true;
    }
    if (isTargetShuffleEquivalent(Mask, {1, 1, 3, 3})) {
      Shuffle = X86ISD::MOVSHDUP;
      SrcVT = DstVT = MVT::v4f32;
      return true;
    }
  }

  if (MaskVT.is256BitVector() && AllowFloatDomain) {
    assert(Subtarget.hasAVX() && "AVX required for 256-bit vector shuffles");
    if (isTargetShuffleEquivalent(Mask, {0, 0, 2, 2})) {
      Shuffle = X86ISD::MOVDDUP;
      SrcVT = DstVT = MVT::v4f64;
      return true;
    }
    if (isTargetShuffleEquivalent(Mask, {0, 0, 2, 2, 4, 4, 6, 6})) {
      Shuffle = X86ISD::MOVSLDUP;
      SrcVT = DstVT = MVT::v8f32;
      return true;
    }
    if (isTargetShuffleEquivalent(Mask, {1, 1, 3, 3, 5, 5, 7, 7})) {
      Shuffle = X86ISD::MOVSHDUP;
      SrcVT = DstVT = MVT::v8f32;
      return true;
    }
  }

  if (MaskVT.is512BitVector() && AllowFloatDomain) {
    assert(Subtarget.hasAVX512() &&
           "AVX512 required for 512-bit vector shuffles");
    if (isTargetShuffleEquivalent(Mask, {0, 0, 2, 2, 4, 4, 6, 6})) {
      Shuffle = X86ISD::MOVDDUP;
      SrcVT = DstVT = MVT::v8f64;
      return true;
    }
    if (isTargetShuffleEquivalent(
            Mask, {0, 0, 2, 2, 4, 4, 6, 6, 8, 8, 10, 10, 12, 12, 14, 14})) {
      Shuffle = X86ISD::MOVSLDUP;
      SrcVT = DstVT = MVT::v16f32;
      return true;
    }
    if (isTargetShuffleEquivalent(
            Mask, {1, 1, 3, 3, 5, 5, 7, 7, 9, 9, 11, 11, 13, 13, 15, 15})) {
      Shuffle = X86ISD::MOVSHDUP;
      SrcVT = DstVT = MVT::v16f32;
      return true;
    }
  }

  // Attempt to match against broadcast-from-vector.
  if (Subtarget.hasAVX2()) {
    SmallVector<int, 64> BroadcastMask(NumMaskElts, 0);
    if (isTargetShuffleEquivalent(Mask, BroadcastMask)) {
      SrcVT = DstVT = MaskVT;
      Shuffle = X86ISD::VBROADCAST;
      return true;
    }
  }

  return false;
}

// Attempt to match a combined shuffle mask against supported unary immediate
// permute instructions.
// TODO: Investigate sharing more of this with shuffle lowering.
static bool matchUnaryPermuteVectorShuffle(MVT MaskVT, ArrayRef<int> Mask,
                                           const APInt &Zeroable,
                                           bool AllowFloatDomain,
                                           bool AllowIntDomain,
                                           const X86Subtarget &Subtarget,
                                           unsigned &Shuffle, MVT &ShuffleVT,
                                           unsigned &PermuteImm) {
  unsigned NumMaskElts = Mask.size();
  unsigned InputSizeInBits = MaskVT.getSizeInBits();
  unsigned MaskScalarSizeInBits = InputSizeInBits / NumMaskElts;
  MVT MaskEltVT = MVT::getIntegerVT(MaskScalarSizeInBits);

  bool ContainsZeros =
      llvm::any_of(Mask, [](int M) { return M == SM_SentinelZero; });

  // Handle VPERMI/VPERMILPD vXi64/vXi64 patterns.
  if (!ContainsZeros && MaskScalarSizeInBits == 64) {
    // Check for lane crossing permutes.
    if (is128BitLaneCrossingShuffleMask(MaskEltVT, Mask)) {
      // PERMPD/PERMQ permutes within a 256-bit vector (AVX2+).
      if (Subtarget.hasAVX2() && MaskVT.is256BitVector()) {
        Shuffle = X86ISD::VPERMI;
        ShuffleVT = (AllowFloatDomain ? MVT::v4f64 : MVT::v4i64);
        PermuteImm = getV4X86ShuffleImm(Mask);
        return true;
      }
      if (Subtarget.hasAVX512() && MaskVT.is512BitVector()) {
        SmallVector<int, 4> RepeatedMask;
        if (is256BitLaneRepeatedShuffleMask(MVT::v8f64, Mask, RepeatedMask)) {
          Shuffle = X86ISD::VPERMI;
          ShuffleVT = (AllowFloatDomain ? MVT::v8f64 : MVT::v8i64);
          PermuteImm = getV4X86ShuffleImm(RepeatedMask);
          return true;
        }
      }
    } else if (AllowFloatDomain && Subtarget.hasAVX()) {
      // VPERMILPD can permute with a non-repeating shuffle.
      Shuffle = X86ISD::VPERMILPI;
      ShuffleVT = MVT::getVectorVT(MVT::f64, Mask.size());
      PermuteImm = 0;
      for (int i = 0, e = Mask.size(); i != e; ++i) {
        int M = Mask[i];
        if (M == SM_SentinelUndef)
          continue;
        assert(((M / 2) == (i / 2)) && "Out of range shuffle mask index");
        PermuteImm |= (M & 1) << i;
      }
      return true;
    }
  }

  // Handle PSHUFD/VPERMILPI vXi32/vXf32 repeated patterns.
  // AVX introduced the VPERMILPD/VPERMILPS float permutes, before then we
  // had to use 2-input SHUFPD/SHUFPS shuffles (not handled here).
  if ((MaskScalarSizeInBits == 64 || MaskScalarSizeInBits == 32) &&
      !ContainsZeros && (AllowIntDomain || Subtarget.hasAVX())) {
    SmallVector<int, 4> RepeatedMask;
    if (is128BitLaneRepeatedShuffleMask(MaskEltVT, Mask, RepeatedMask)) {
      // Narrow the repeated mask to create 32-bit element permutes.
      SmallVector<int, 4> WordMask = RepeatedMask;
      if (MaskScalarSizeInBits == 64)
        scaleShuffleMask<int>(2, RepeatedMask, WordMask);

      Shuffle = (AllowIntDomain ? X86ISD::PSHUFD : X86ISD::VPERMILPI);
      ShuffleVT = (AllowIntDomain ? MVT::i32 : MVT::f32);
      ShuffleVT = MVT::getVectorVT(ShuffleVT, InputSizeInBits / 32);
      PermuteImm = getV4X86ShuffleImm(WordMask);
      return true;
    }
  }

  // Handle PSHUFLW/PSHUFHW vXi16 repeated patterns.
  if (!ContainsZeros && AllowIntDomain && MaskScalarSizeInBits == 16) {
    SmallVector<int, 4> RepeatedMask;
    if (is128BitLaneRepeatedShuffleMask(MaskEltVT, Mask, RepeatedMask)) {
      ArrayRef<int> LoMask(Mask.data() + 0, 4);
      ArrayRef<int> HiMask(Mask.data() + 4, 4);

      // PSHUFLW: permute lower 4 elements only.
      if (isUndefOrInRange(LoMask, 0, 4) &&
          isSequentialOrUndefInRange(HiMask, 0, 4, 4)) {
        Shuffle = X86ISD::PSHUFLW;
        ShuffleVT = MVT::getVectorVT(MVT::i16, InputSizeInBits / 16);
        PermuteImm = getV4X86ShuffleImm(LoMask);
        return true;
      }

      // PSHUFHW: permute upper 4 elements only.
      if (isUndefOrInRange(HiMask, 4, 8) &&
          isSequentialOrUndefInRange(LoMask, 0, 4, 0)) {
        // Offset the HiMask so that we can create the shuffle immediate.
        int OffsetHiMask[4];
        for (int i = 0; i != 4; ++i)
          OffsetHiMask[i] = (HiMask[i] < 0 ? HiMask[i] : HiMask[i] - 4);

        Shuffle = X86ISD::PSHUFHW;
        ShuffleVT = MVT::getVectorVT(MVT::i16, InputSizeInBits / 16);
        PermuteImm = getV4X86ShuffleImm(OffsetHiMask);
        return true;
      }
    }
  }

  // Attempt to match against byte/bit shifts.
  // FIXME: Add 512-bit support.
  if (AllowIntDomain && ((MaskVT.is128BitVector() && Subtarget.hasSSE2()) ||
                         (MaskVT.is256BitVector() && Subtarget.hasAVX2()))) {
    int ShiftAmt = matchVectorShuffleAsShift(ShuffleVT, Shuffle,
                                             MaskScalarSizeInBits, Mask,
                                             0, Zeroable, Subtarget);
    if (0 < ShiftAmt) {
      PermuteImm = (unsigned)ShiftAmt;
      return true;
    }
  }

  return false;
}

// Attempt to match a combined unary shuffle mask against supported binary
// shuffle instructions.
// TODO: Investigate sharing more of this with shuffle lowering.
static bool matchBinaryVectorShuffle(MVT MaskVT, ArrayRef<int> Mask,
                                     bool AllowFloatDomain, bool AllowIntDomain,
                                     SDValue &V1, SDValue &V2, SDLoc &DL,
                                     SelectionDAG &DAG,
                                     const X86Subtarget &Subtarget,
                                     unsigned &Shuffle, MVT &SrcVT, MVT &DstVT,
                                     bool IsUnary) {
  unsigned EltSizeInBits = MaskVT.getScalarSizeInBits();

  if (MaskVT.is128BitVector()) {
    if (isTargetShuffleEquivalent(Mask, {0, 0}) && AllowFloatDomain) {
      V2 = V1;
      Shuffle = X86ISD::MOVLHPS;
      SrcVT = DstVT = MVT::v4f32;
      return true;
    }
    if (isTargetShuffleEquivalent(Mask, {1, 1}) && AllowFloatDomain) {
      V2 = V1;
      Shuffle = X86ISD::MOVHLPS;
      SrcVT = DstVT = MVT::v4f32;
      return true;
    }
    if (isTargetShuffleEquivalent(Mask, {0, 3}) && Subtarget.hasSSE2() &&
        (AllowFloatDomain || !Subtarget.hasSSE41())) {
      std::swap(V1, V2);
      Shuffle = X86ISD::MOVSD;
      SrcVT = DstVT = MaskVT;
      return true;
    }
    if (isTargetShuffleEquivalent(Mask, {4, 1, 2, 3}) &&
        (AllowFloatDomain || !Subtarget.hasSSE41())) {
      Shuffle = X86ISD::MOVSS;
      SrcVT = DstVT = MaskVT;
      return true;
    }
  }

  // Attempt to match against either a unary or binary PACKSS/PACKUS shuffle.
  // TODO add support for 256/512-bit types.
  if ((MaskVT == MVT::v8i16 || MaskVT == MVT::v16i8) && Subtarget.hasSSE2()) {
    if (matchVectorShuffleWithPACK(MaskVT, SrcVT, V1, V2, Shuffle, Mask, DAG,
                                   Subtarget)) {
      DstVT = MaskVT;
      return true;
    }
  }

  // Attempt to match against either a unary or binary UNPCKL/UNPCKH shuffle.
  if ((MaskVT == MVT::v4f32 && Subtarget.hasSSE1()) ||
      (MaskVT.is128BitVector() && Subtarget.hasSSE2()) ||
      (MaskVT.is256BitVector() && 32 <= EltSizeInBits && Subtarget.hasAVX()) ||
      (MaskVT.is256BitVector() && Subtarget.hasAVX2()) ||
      (MaskVT.is512BitVector() && Subtarget.hasAVX512())) {
    if (matchVectorShuffleWithUNPCK(MaskVT, V1, V2, Shuffle, IsUnary, Mask, DL,
                                    DAG, Subtarget)) {
      SrcVT = DstVT = MaskVT;
      if (MaskVT.is256BitVector() && !Subtarget.hasAVX2())
        SrcVT = DstVT = (32 == EltSizeInBits ? MVT::v8f32 : MVT::v4f64);
      return true;
    }
  }

  return false;
}

static bool matchBinaryPermuteVectorShuffle(MVT MaskVT, ArrayRef<int> Mask,
                                            const APInt &Zeroable,
                                            bool AllowFloatDomain,
                                            bool AllowIntDomain,
                                            SDValue &V1, SDValue &V2, SDLoc &DL,
                                            SelectionDAG &DAG,
                                            const X86Subtarget &Subtarget,
                                            unsigned &Shuffle, MVT &ShuffleVT,
                                            unsigned &PermuteImm) {
  unsigned NumMaskElts = Mask.size();
  unsigned EltSizeInBits = MaskVT.getScalarSizeInBits();

  // Attempt to match against PALIGNR byte rotate.
  if (AllowIntDomain && ((MaskVT.is128BitVector() && Subtarget.hasSSSE3()) ||
                         (MaskVT.is256BitVector() && Subtarget.hasAVX2()))) {
    int ByteRotation = matchVectorShuffleAsByteRotate(MaskVT, V1, V2, Mask);
    if (0 < ByteRotation) {
      Shuffle = X86ISD::PALIGNR;
      ShuffleVT = MVT::getVectorVT(MVT::i8, MaskVT.getSizeInBits() / 8);
      PermuteImm = ByteRotation;
      return true;
    }
  }

  // Attempt to combine to X86ISD::BLENDI.
  if ((NumMaskElts <= 8 && ((Subtarget.hasSSE41() && MaskVT.is128BitVector()) ||
                            (Subtarget.hasAVX() && MaskVT.is256BitVector()))) ||
      (MaskVT == MVT::v16i16 && Subtarget.hasAVX2())) {
    uint64_t BlendMask = 0;
    bool ForceV1Zero = false, ForceV2Zero = false;
    SmallVector<int, 8> TargetMask(Mask.begin(), Mask.end());
    if (matchVectorShuffleAsBlend(V1, V2, TargetMask, ForceV1Zero, ForceV2Zero,
                                  BlendMask)) {
      if (MaskVT == MVT::v16i16) {
        // We can only use v16i16 PBLENDW if the lanes are repeated.
        SmallVector<int, 8> RepeatedMask;
        if (isRepeatedTargetShuffleMask(128, MaskVT, TargetMask,
                                        RepeatedMask)) {
          assert(RepeatedMask.size() == 8 &&
                 "Repeated mask size doesn't match!");
          PermuteImm = 0;
          for (int i = 0; i < 8; ++i)
            if (RepeatedMask[i] >= 8)
              PermuteImm |= 1 << i;
          V1 = ForceV1Zero ? getZeroVector(MaskVT, Subtarget, DAG, DL) : V1;
          V2 = ForceV2Zero ? getZeroVector(MaskVT, Subtarget, DAG, DL) : V2;
          Shuffle = X86ISD::BLENDI;
          ShuffleVT = MaskVT;
          return true;
        }
      } else {
        // Determine a type compatible with X86ISD::BLENDI.
        ShuffleVT = MaskVT;
        if (Subtarget.hasAVX2()) {
          if (ShuffleVT == MVT::v4i64)
            ShuffleVT = MVT::v8i32;
          else if (ShuffleVT == MVT::v2i64)
            ShuffleVT = MVT::v4i32;
        } else {
          if (ShuffleVT == MVT::v2i64 || ShuffleVT == MVT::v4i32)
            ShuffleVT = MVT::v8i16;
          else if (ShuffleVT == MVT::v4i64)
            ShuffleVT = MVT::v4f64;
          else if (ShuffleVT == MVT::v8i32)
            ShuffleVT = MVT::v8f32;
        }

        if (!ShuffleVT.isFloatingPoint()) {
          int Scale = EltSizeInBits / ShuffleVT.getScalarSizeInBits();
          BlendMask =
              scaleVectorShuffleBlendMask(BlendMask, NumMaskElts, Scale);
          ShuffleVT = MVT::getIntegerVT(EltSizeInBits / Scale);
          ShuffleVT = MVT::getVectorVT(ShuffleVT, NumMaskElts * Scale);
        }

        V1 = ForceV1Zero ? getZeroVector(MaskVT, Subtarget, DAG, DL) : V1;
        V2 = ForceV2Zero ? getZeroVector(MaskVT, Subtarget, DAG, DL) : V2;
        PermuteImm = (unsigned)BlendMask;
        Shuffle = X86ISD::BLENDI;
        return true;
      }
    }
  }

  // Attempt to combine to INSERTPS.
  if (AllowFloatDomain && EltSizeInBits == 32 && Subtarget.hasSSE41() &&
      MaskVT.is128BitVector()) {
    if (Zeroable.getBoolValue() &&
        matchVectorShuffleAsInsertPS(V1, V2, PermuteImm, Zeroable, Mask, DAG)) {
      Shuffle = X86ISD::INSERTPS;
      ShuffleVT = MVT::v4f32;
      return true;
    }
  }

  // Attempt to combine to SHUFPD.
  if (AllowFloatDomain && EltSizeInBits == 64 &&
      ((MaskVT.is128BitVector() && Subtarget.hasSSE2()) ||
       (MaskVT.is256BitVector() && Subtarget.hasAVX()) ||
       (MaskVT.is512BitVector() && Subtarget.hasAVX512()))) {
    if (matchVectorShuffleWithSHUFPD(MaskVT, V1, V2, PermuteImm, Mask)) {
      Shuffle = X86ISD::SHUFP;
      ShuffleVT = MVT::getVectorVT(MVT::f64, MaskVT.getSizeInBits() / 64);
      return true;
    }
  }

  // Attempt to combine to SHUFPS.
  if (AllowFloatDomain && EltSizeInBits == 32 &&
      ((MaskVT.is128BitVector() && Subtarget.hasSSE1()) ||
       (MaskVT.is256BitVector() && Subtarget.hasAVX()) ||
       (MaskVT.is512BitVector() && Subtarget.hasAVX512()))) {
    SmallVector<int, 4> RepeatedMask;
    if (isRepeatedTargetShuffleMask(128, MaskVT, Mask, RepeatedMask)) {
      // Match each half of the repeated mask, to determine if its just
      // referencing one of the vectors, is zeroable or entirely undef.
      auto MatchHalf = [&](unsigned Offset, int &S0, int &S1) {
        int M0 = RepeatedMask[Offset];
        int M1 = RepeatedMask[Offset + 1];

        if (isUndefInRange(RepeatedMask, Offset, 2)) {
          return DAG.getUNDEF(MaskVT);
        } else if (isUndefOrZeroInRange(RepeatedMask, Offset, 2)) {
          S0 = (SM_SentinelUndef == M0 ? -1 : 0);
          S1 = (SM_SentinelUndef == M1 ? -1 : 1);
          return getZeroVector(MaskVT, Subtarget, DAG, DL);
        } else if (isUndefOrInRange(M0, 0, 4) && isUndefOrInRange(M1, 0, 4)) {
          S0 = (SM_SentinelUndef == M0 ? -1 : M0 & 3);
          S1 = (SM_SentinelUndef == M1 ? -1 : M1 & 3);
          return V1;
        } else if (isUndefOrInRange(M0, 4, 8) && isUndefOrInRange(M1, 4, 8)) {
          S0 = (SM_SentinelUndef == M0 ? -1 : M0 & 3);
          S1 = (SM_SentinelUndef == M1 ? -1 : M1 & 3);
          return V2;
        }

        return SDValue();
      };

      int ShufMask[4] = {-1, -1, -1, -1};
      SDValue Lo = MatchHalf(0, ShufMask[0], ShufMask[1]);
      SDValue Hi = MatchHalf(2, ShufMask[2], ShufMask[3]);

      if (Lo && Hi) {
        V1 = Lo;
        V2 = Hi;
        Shuffle = X86ISD::SHUFP;
        ShuffleVT = MVT::getVectorVT(MVT::f32, MaskVT.getSizeInBits() / 32);
        PermuteImm = getV4X86ShuffleImm(ShufMask);
        return true;
      }
    }
  }

  return false;
}

/// \brief Combine an arbitrary chain of shuffles into a single instruction if
/// possible.
///
/// This is the leaf of the recursive combine below. When we have found some
/// chain of single-use x86 shuffle instructions and accumulated the combined
/// shuffle mask represented by them, this will try to pattern match that mask
/// into either a single instruction if there is a special purpose instruction
/// for this operation, or into a PSHUFB instruction which is a fully general
/// instruction but should only be used to replace chains over a certain depth.
static SDValue combineX86ShuffleChain(ArrayRef<SDValue> Inputs, SDValue Root,
                                      ArrayRef<int> BaseMask, int Depth,
                                      bool HasVariableMask, SelectionDAG &DAG,
                                      TargetLowering::DAGCombinerInfo &DCI,
                                      const X86Subtarget &Subtarget) {
  assert(!BaseMask.empty() && "Cannot combine an empty shuffle mask!");
  assert((Inputs.size() == 1 || Inputs.size() == 2) &&
         "Unexpected number of shuffle inputs!");

  // Find the inputs that enter the chain. Note that multiple uses are OK
  // here, we're not going to remove the operands we find.
  bool UnaryShuffle = (Inputs.size() == 1);
  SDValue V1 = peekThroughBitcasts(Inputs[0]);
  SDValue V2 = (UnaryShuffle ? DAG.getUNDEF(V1.getValueType())
                             : peekThroughBitcasts(Inputs[1]));

  MVT VT1 = V1.getSimpleValueType();
  MVT VT2 = V2.getSimpleValueType();
  MVT RootVT = Root.getSimpleValueType();
  assert(VT1.getSizeInBits() == RootVT.getSizeInBits() &&
         VT2.getSizeInBits() == RootVT.getSizeInBits() &&
         "Vector size mismatch");

  SDLoc DL(Root);
  SDValue Res;

  unsigned NumBaseMaskElts = BaseMask.size();
  if (NumBaseMaskElts == 1) {
    assert(BaseMask[0] == 0 && "Invalid shuffle index found!");
    return DAG.getBitcast(RootVT, V1);
  }

  unsigned RootSizeInBits = RootVT.getSizeInBits();
  unsigned NumRootElts = RootVT.getVectorNumElements();
  unsigned BaseMaskEltSizeInBits = RootSizeInBits / NumBaseMaskElts;
  bool FloatDomain = VT1.isFloatingPoint() || VT2.isFloatingPoint() ||
                     (RootVT.is256BitVector() && !Subtarget.hasAVX2());

  // Don't combine if we are a AVX512/EVEX target and the mask element size
  // is different from the root element size - this would prevent writemasks
  // from being reused.
  // TODO - this currently prevents all lane shuffles from occurring.
  // TODO - check for writemasks usage instead of always preventing combining.
  // TODO - attempt to narrow Mask back to writemask size.
  bool IsEVEXShuffle =
      RootSizeInBits == 512 || (Subtarget.hasVLX() && RootSizeInBits >= 128);
  if (IsEVEXShuffle && (RootVT.getScalarSizeInBits() != BaseMaskEltSizeInBits))
    return SDValue();

  // TODO - handle 128/256-bit lane shuffles of 512-bit vectors.

  // Handle 128-bit lane shuffles of 256-bit vectors.
  // If we have AVX2, prefer to use VPERMQ/VPERMPD for unary shuffles unless
  // we need to use the zeroing feature.
  // TODO - this should support binary shuffles.
  if (UnaryShuffle && RootVT.is256BitVector() && NumBaseMaskElts == 2 &&
      !(Subtarget.hasAVX2() && BaseMask[0] >= -1 && BaseMask[1] >= -1) &&
      !isSequentialOrUndefOrZeroInRange(BaseMask, 0, 2, 0)) {
    if (Depth == 1 && Root.getOpcode() == X86ISD::VPERM2X128)
      return SDValue(); // Nothing to do!
    MVT ShuffleVT = (FloatDomain ? MVT::v4f64 : MVT::v4i64);
    unsigned PermMask = 0;
    PermMask |= ((BaseMask[0] < 0 ? 0x8 : (BaseMask[0] & 1)) << 0);
    PermMask |= ((BaseMask[1] < 0 ? 0x8 : (BaseMask[1] & 1)) << 4);

    Res = DAG.getBitcast(ShuffleVT, V1);
    DCI.AddToWorklist(Res.getNode());
    Res = DAG.getNode(X86ISD::VPERM2X128, DL, ShuffleVT, Res,
                      DAG.getUNDEF(ShuffleVT),
                      DAG.getConstant(PermMask, DL, MVT::i8));
    DCI.AddToWorklist(Res.getNode());
    return DAG.getBitcast(RootVT, Res);
  }

  // For masks that have been widened to 128-bit elements or more,
  // narrow back down to 64-bit elements.
  SmallVector<int, 64> Mask;
  if (BaseMaskEltSizeInBits > 64) {
    assert((BaseMaskEltSizeInBits % 64) == 0 && "Illegal mask size");
    int MaskScale = BaseMaskEltSizeInBits / 64;
    scaleShuffleMask<int>(MaskScale, BaseMask, Mask);
  } else {
    Mask = SmallVector<int, 64>(BaseMask.begin(), BaseMask.end());
  }

  unsigned NumMaskElts = Mask.size();
  unsigned MaskEltSizeInBits = RootSizeInBits / NumMaskElts;

  // Determine the effective mask value type.
  FloatDomain &= (32 <= MaskEltSizeInBits);
  MVT MaskVT = FloatDomain ? MVT::getFloatingPointVT(MaskEltSizeInBits)
                           : MVT::getIntegerVT(MaskEltSizeInBits);
  MaskVT = MVT::getVectorVT(MaskVT, NumMaskElts);

  // Only allow legal mask types.
  if (!DAG.getTargetLoweringInfo().isTypeLegal(MaskVT))
    return SDValue();

  // Attempt to match the mask against known shuffle patterns.
  MVT ShuffleSrcVT, ShuffleVT;
  unsigned Shuffle, PermuteImm;

  // Which shuffle domains are permitted?
  // Permit domain crossing at higher combine depths.
  bool AllowFloatDomain = FloatDomain || (Depth > 3);
  bool AllowIntDomain = (!FloatDomain || (Depth > 3)) &&
                        (!MaskVT.is256BitVector() || Subtarget.hasAVX2());

  // Determine zeroable mask elements.
  APInt Zeroable(NumMaskElts, 0);
  for (unsigned i = 0; i != NumMaskElts; ++i)
    if (isUndefOrZero(Mask[i]))
      Zeroable.setBit(i);

  if (UnaryShuffle) {
    // If we are shuffling a X86ISD::VZEXT_LOAD then we can use the load
    // directly if we don't shuffle the lower element and we shuffle the upper
    // (zero) elements within themselves.
    if (V1.getOpcode() == X86ISD::VZEXT_LOAD &&
        (V1.getScalarValueSizeInBits() % MaskEltSizeInBits) == 0) {
      unsigned Scale = V1.getScalarValueSizeInBits() / MaskEltSizeInBits;
      ArrayRef<int> HiMask(Mask.data() + Scale, NumMaskElts - Scale);
      if (isSequentialOrUndefInRange(Mask, 0, Scale, 0) &&
          isUndefOrZeroOrInRange(HiMask, Scale, NumMaskElts)) {
        return DAG.getBitcast(RootVT, V1);
      }
    }

    if (matchUnaryVectorShuffle(MaskVT, Mask, AllowFloatDomain, AllowIntDomain,
                                V1, DL, DAG, Subtarget, Shuffle, ShuffleSrcVT,
                                ShuffleVT)) {
      if (Depth == 1 && Root.getOpcode() == Shuffle)
        return SDValue(); // Nothing to do!
      if (IsEVEXShuffle && (NumRootElts != ShuffleVT.getVectorNumElements()))
        return SDValue(); // AVX512 Writemask clash.
      Res = DAG.getBitcast(ShuffleSrcVT, V1);
      DCI.AddToWorklist(Res.getNode());
      Res = DAG.getNode(Shuffle, DL, ShuffleVT, Res);
      DCI.AddToWorklist(Res.getNode());
      return DAG.getBitcast(RootVT, Res);
    }

    if (matchUnaryPermuteVectorShuffle(MaskVT, Mask, Zeroable, AllowFloatDomain,
                                       AllowIntDomain, Subtarget, Shuffle,
                                       ShuffleVT, PermuteImm)) {
      if (Depth == 1 && Root.getOpcode() == Shuffle)
        return SDValue(); // Nothing to do!
      if (IsEVEXShuffle && (NumRootElts != ShuffleVT.getVectorNumElements()))
        return SDValue(); // AVX512 Writemask clash.
      Res = DAG.getBitcast(ShuffleVT, V1);
      DCI.AddToWorklist(Res.getNode());
      Res = DAG.getNode(Shuffle, DL, ShuffleVT, Res,
                        DAG.getConstant(PermuteImm, DL, MVT::i8));
      DCI.AddToWorklist(Res.getNode());
      return DAG.getBitcast(RootVT, Res);
    }
  }

  if (matchBinaryVectorShuffle(MaskVT, Mask, AllowFloatDomain, AllowIntDomain,
                               V1, V2, DL, DAG, Subtarget, Shuffle, ShuffleSrcVT,
                               ShuffleVT, UnaryShuffle)) {
    if (Depth == 1 && Root.getOpcode() == Shuffle)
      return SDValue(); // Nothing to do!
    if (IsEVEXShuffle && (NumRootElts != ShuffleVT.getVectorNumElements()))
      return SDValue(); // AVX512 Writemask clash.
    V1 = DAG.getBitcast(ShuffleSrcVT, V1);
    DCI.AddToWorklist(V1.getNode());
    V2 = DAG.getBitcast(ShuffleSrcVT, V2);
    DCI.AddToWorklist(V2.getNode());
    Res = DAG.getNode(Shuffle, DL, ShuffleVT, V1, V2);
    DCI.AddToWorklist(Res.getNode());
    return DAG.getBitcast(RootVT, Res);
  }

  if (matchBinaryPermuteVectorShuffle(MaskVT, Mask, Zeroable, AllowFloatDomain,
                                      AllowIntDomain, V1, V2, DL, DAG,
                                      Subtarget, Shuffle, ShuffleVT,
                                      PermuteImm)) {
    if (Depth == 1 && Root.getOpcode() == Shuffle)
      return SDValue(); // Nothing to do!
    if (IsEVEXShuffle && (NumRootElts != ShuffleVT.getVectorNumElements()))
      return SDValue(); // AVX512 Writemask clash.
    V1 = DAG.getBitcast(ShuffleVT, V1);
    DCI.AddToWorklist(V1.getNode());
    V2 = DAG.getBitcast(ShuffleVT, V2);
    DCI.AddToWorklist(V2.getNode());
    Res = DAG.getNode(Shuffle, DL, ShuffleVT, V1, V2,
                      DAG.getConstant(PermuteImm, DL, MVT::i8));
    DCI.AddToWorklist(Res.getNode());
    return DAG.getBitcast(RootVT, Res);
  }

  // Typically from here on, we need an integer version of MaskVT.
  MVT IntMaskVT = MVT::getIntegerVT(MaskEltSizeInBits);
  IntMaskVT = MVT::getVectorVT(IntMaskVT, NumMaskElts);

  // Annoyingly, SSE4A instructions don't map into the above match helpers.
  if (Subtarget.hasSSE4A() && AllowIntDomain && RootSizeInBits == 128) {
    uint64_t BitLen, BitIdx;
    if (matchVectorShuffleAsEXTRQ(IntMaskVT, V1, V2, Mask, BitLen, BitIdx,
                                  Zeroable)) {
      if (Depth == 1 && Root.getOpcode() == X86ISD::EXTRQI)
        return SDValue(); // Nothing to do!
      V1 = DAG.getBitcast(IntMaskVT, V1);
      DCI.AddToWorklist(V1.getNode());
      Res = DAG.getNode(X86ISD::EXTRQI, DL, IntMaskVT, V1,
                        DAG.getConstant(BitLen, DL, MVT::i8),
                        DAG.getConstant(BitIdx, DL, MVT::i8));
      DCI.AddToWorklist(Res.getNode());
      return DAG.getBitcast(RootVT, Res);
    }

    if (matchVectorShuffleAsINSERTQ(IntMaskVT, V1, V2, Mask, BitLen, BitIdx)) {
      if (Depth == 1 && Root.getOpcode() == X86ISD::INSERTQI)
        return SDValue(); // Nothing to do!
      V1 = DAG.getBitcast(IntMaskVT, V1);
      DCI.AddToWorklist(V1.getNode());
      V2 = DAG.getBitcast(IntMaskVT, V2);
      DCI.AddToWorklist(V2.getNode());
      Res = DAG.getNode(X86ISD::INSERTQI, DL, IntMaskVT, V1, V2,
                        DAG.getConstant(BitLen, DL, MVT::i8),
                        DAG.getConstant(BitIdx, DL, MVT::i8));
      DCI.AddToWorklist(Res.getNode());
      return DAG.getBitcast(RootVT, Res);
    }
  }

  // Don't try to re-form single instruction chains under any circumstances now
  // that we've done encoding canonicalization for them.
  if (Depth < 2)
    return SDValue();

  // Depth threshold above which we can efficiently use variable mask shuffles.
  // TODO This should probably be target specific.
  bool AllowVariableMask = (Depth >= 3) || HasVariableMask;

  bool MaskContainsZeros =
      any_of(Mask, [](int M) { return M == SM_SentinelZero; });

  if (is128BitLaneCrossingShuffleMask(MaskVT, Mask)) {
    // If we have a single input lane-crossing shuffle then lower to VPERMV.
    if (UnaryShuffle && AllowVariableMask && !MaskContainsZeros &&
        ((Subtarget.hasAVX2() &&
          (MaskVT == MVT::v8f32 || MaskVT == MVT::v8i32)) ||
         (Subtarget.hasAVX512() &&
          (MaskVT == MVT::v8f64 || MaskVT == MVT::v8i64 ||
           MaskVT == MVT::v16f32 || MaskVT == MVT::v16i32)) ||
         (Subtarget.hasBWI() && MaskVT == MVT::v32i16) ||
         (Subtarget.hasBWI() && Subtarget.hasVLX() && MaskVT == MVT::v16i16) ||
         (Subtarget.hasVBMI() && MaskVT == MVT::v64i8) ||
         (Subtarget.hasVBMI() && Subtarget.hasVLX() && MaskVT == MVT::v32i8))) {
      SDValue VPermMask = getConstVector(Mask, IntMaskVT, DAG, DL, true);
      DCI.AddToWorklist(VPermMask.getNode());
      Res = DAG.getBitcast(MaskVT, V1);
      DCI.AddToWorklist(Res.getNode());
      Res = DAG.getNode(X86ISD::VPERMV, DL, MaskVT, VPermMask, Res);
      DCI.AddToWorklist(Res.getNode());
      return DAG.getBitcast(RootVT, Res);
    }

    // Lower a unary+zero lane-crossing shuffle as VPERMV3 with a zero
    // vector as the second source.
    if (UnaryShuffle && AllowVariableMask &&
        ((Subtarget.hasAVX512() &&
          (MaskVT == MVT::v8f64 || MaskVT == MVT::v8i64 ||
           MaskVT == MVT::v16f32 || MaskVT == MVT::v16i32)) ||
         (Subtarget.hasVLX() &&
          (MaskVT == MVT::v4f64 || MaskVT == MVT::v4i64 ||
           MaskVT == MVT::v8f32 || MaskVT == MVT::v8i32)) ||
         (Subtarget.hasBWI() && MaskVT == MVT::v32i16) ||
         (Subtarget.hasBWI() && Subtarget.hasVLX() && MaskVT == MVT::v16i16) ||
         (Subtarget.hasVBMI() && MaskVT == MVT::v64i8) ||
         (Subtarget.hasVBMI() && Subtarget.hasVLX() && MaskVT == MVT::v32i8))) {
      // Adjust shuffle mask - replace SM_SentinelZero with second source index.
      for (unsigned i = 0; i != NumMaskElts; ++i)
        if (Mask[i] == SM_SentinelZero)
          Mask[i] = NumMaskElts + i;

      SDValue VPermMask = getConstVector(Mask, IntMaskVT, DAG, DL, true);
      DCI.AddToWorklist(VPermMask.getNode());
      Res = DAG.getBitcast(MaskVT, V1);
      DCI.AddToWorklist(Res.getNode());
      SDValue Zero = getZeroVector(MaskVT, Subtarget, DAG, DL);
      DCI.AddToWorklist(Zero.getNode());
      Res = DAG.getNode(X86ISD::VPERMV3, DL, MaskVT, Res, VPermMask, Zero);
      DCI.AddToWorklist(Res.getNode());
      return DAG.getBitcast(RootVT, Res);
    }

    // If we have a dual input lane-crossing shuffle then lower to VPERMV3.
    if (AllowVariableMask && !MaskContainsZeros &&
        ((Subtarget.hasAVX512() &&
          (MaskVT == MVT::v8f64 || MaskVT == MVT::v8i64 ||
           MaskVT == MVT::v16f32 || MaskVT == MVT::v16i32)) ||
         (Subtarget.hasVLX() &&
          (MaskVT == MVT::v4f64 || MaskVT == MVT::v4i64 ||
           MaskVT == MVT::v8f32 || MaskVT == MVT::v8i32)) ||
         (Subtarget.hasBWI() && MaskVT == MVT::v32i16) ||
         (Subtarget.hasBWI() && Subtarget.hasVLX() && MaskVT == MVT::v16i16) ||
         (Subtarget.hasVBMI() && MaskVT == MVT::v64i8) ||
         (Subtarget.hasVBMI() && Subtarget.hasVLX() && MaskVT == MVT::v32i8))) {
      SDValue VPermMask = getConstVector(Mask, IntMaskVT, DAG, DL, true);
      DCI.AddToWorklist(VPermMask.getNode());
      V1 = DAG.getBitcast(MaskVT, V1);
      DCI.AddToWorklist(V1.getNode());
      V2 = DAG.getBitcast(MaskVT, V2);
      DCI.AddToWorklist(V2.getNode());
      Res = DAG.getNode(X86ISD::VPERMV3, DL, MaskVT, V1, VPermMask, V2);
      DCI.AddToWorklist(Res.getNode());
      return DAG.getBitcast(RootVT, Res);
    }
    return SDValue();
  }

  // See if we can combine a single input shuffle with zeros to a bit-mask,
  // which is much simpler than any shuffle.
  if (UnaryShuffle && MaskContainsZeros && AllowVariableMask &&
      isSequentialOrUndefOrZeroInRange(Mask, 0, NumMaskElts, 0) &&
      DAG.getTargetLoweringInfo().isTypeLegal(MaskVT)) {
    APInt Zero = APInt::getNullValue(MaskEltSizeInBits);
    APInt AllOnes = APInt::getAllOnesValue(MaskEltSizeInBits);
    APInt UndefElts(NumMaskElts, 0);
    SmallVector<APInt, 64> EltBits(NumMaskElts, Zero);
    for (unsigned i = 0; i != NumMaskElts; ++i) {
      int M = Mask[i];
      if (M == SM_SentinelUndef) {
        UndefElts.setBit(i);
        continue;
      }
      if (M == SM_SentinelZero)
        continue;
      EltBits[i] = AllOnes;
    }
    SDValue BitMask = getConstVector(EltBits, UndefElts, MaskVT, DAG, DL);
    DCI.AddToWorklist(BitMask.getNode());
    Res = DAG.getBitcast(MaskVT, V1);
    DCI.AddToWorklist(Res.getNode());
    unsigned AndOpcode =
        FloatDomain ? unsigned(X86ISD::FAND) : unsigned(ISD::AND);
    Res = DAG.getNode(AndOpcode, DL, MaskVT, Res, BitMask);
    DCI.AddToWorklist(Res.getNode());
    return DAG.getBitcast(RootVT, Res);
  }

  // If we have a single input shuffle with different shuffle patterns in the
  // the 128-bit lanes use the variable mask to VPERMILPS.
  // TODO Combine other mask types at higher depths.
  if (UnaryShuffle && AllowVariableMask && !MaskContainsZeros &&
      ((MaskVT == MVT::v8f32 && Subtarget.hasAVX()) ||
       (MaskVT == MVT::v16f32 && Subtarget.hasAVX512()))) {
    SmallVector<SDValue, 16> VPermIdx;
    for (int M : Mask) {
      SDValue Idx =
          M < 0 ? DAG.getUNDEF(MVT::i32) : DAG.getConstant(M % 4, DL, MVT::i32);
      VPermIdx.push_back(Idx);
    }
    SDValue VPermMask = DAG.getBuildVector(IntMaskVT, DL, VPermIdx);
    DCI.AddToWorklist(VPermMask.getNode());
    Res = DAG.getBitcast(MaskVT, V1);
    DCI.AddToWorklist(Res.getNode());
    Res = DAG.getNode(X86ISD::VPERMILPV, DL, MaskVT, Res, VPermMask);
    DCI.AddToWorklist(Res.getNode());
    return DAG.getBitcast(RootVT, Res);
  }

  // With XOP, binary shuffles of 128/256-bit floating point vectors can combine
  // to VPERMIL2PD/VPERMIL2PS.
  if (AllowVariableMask && Subtarget.hasXOP() &&
      (MaskVT == MVT::v2f64 || MaskVT == MVT::v4f64 || MaskVT == MVT::v4f32 ||
       MaskVT == MVT::v8f32)) {
    // VPERMIL2 Operation.
    // Bits[3] - Match Bit.
    // Bits[2:1] - (Per Lane) PD Shuffle Mask.
    // Bits[2:0] - (Per Lane) PS Shuffle Mask.
    unsigned NumLanes = MaskVT.getSizeInBits() / 128;
    unsigned NumEltsPerLane = NumMaskElts / NumLanes;
    SmallVector<int, 8> VPerm2Idx;
    unsigned M2ZImm = 0;
    for (int M : Mask) {
      if (M == SM_SentinelUndef) {
        VPerm2Idx.push_back(-1);
        continue;
      }
      if (M == SM_SentinelZero) {
        M2ZImm = 2;
        VPerm2Idx.push_back(8);
        continue;
      }
      int Index = (M % NumEltsPerLane) + ((M / NumMaskElts) * NumEltsPerLane);
      Index = (MaskVT.getScalarSizeInBits() == 64 ? Index << 1 : Index);
      VPerm2Idx.push_back(Index);
    }
    V1 = DAG.getBitcast(MaskVT, V1);
    DCI.AddToWorklist(V1.getNode());
    V2 = DAG.getBitcast(MaskVT, V2);
    DCI.AddToWorklist(V2.getNode());
    SDValue VPerm2MaskOp = getConstVector(VPerm2Idx, IntMaskVT, DAG, DL, true);
    DCI.AddToWorklist(VPerm2MaskOp.getNode());
    Res = DAG.getNode(X86ISD::VPERMIL2, DL, MaskVT, V1, V2, VPerm2MaskOp,
                      DAG.getConstant(M2ZImm, DL, MVT::i8));
    DCI.AddToWorklist(Res.getNode());
    return DAG.getBitcast(RootVT, Res);
  }

  // If we have 3 or more shuffle instructions or a chain involving a variable
  // mask, we can replace them with a single PSHUFB instruction profitably.
  // Intel's manuals suggest only using PSHUFB if doing so replacing 5
  // instructions, but in practice PSHUFB tends to be *very* fast so we're
  // more aggressive.
  if (UnaryShuffle && AllowVariableMask &&
      ((RootVT.is128BitVector() && Subtarget.hasSSSE3()) ||
       (RootVT.is256BitVector() && Subtarget.hasAVX2()) ||
       (RootVT.is512BitVector() && Subtarget.hasBWI()))) {
    SmallVector<SDValue, 16> PSHUFBMask;
    int NumBytes = RootVT.getSizeInBits() / 8;
    int Ratio = NumBytes / NumMaskElts;
    for (int i = 0; i < NumBytes; ++i) {
      int M = Mask[i / Ratio];
      if (M == SM_SentinelUndef) {
        PSHUFBMask.push_back(DAG.getUNDEF(MVT::i8));
        continue;
      }
      if (M == SM_SentinelZero) {
        PSHUFBMask.push_back(DAG.getConstant(255, DL, MVT::i8));
        continue;
      }
      M = Ratio * M + i % Ratio;
      assert((M / 16) == (i / 16) && "Lane crossing detected");
      PSHUFBMask.push_back(DAG.getConstant(M, DL, MVT::i8));
    }
    MVT ByteVT = MVT::getVectorVT(MVT::i8, NumBytes);
    Res = DAG.getBitcast(ByteVT, V1);
    DCI.AddToWorklist(Res.getNode());
    SDValue PSHUFBMaskOp = DAG.getBuildVector(ByteVT, DL, PSHUFBMask);
    DCI.AddToWorklist(PSHUFBMaskOp.getNode());
    Res = DAG.getNode(X86ISD::PSHUFB, DL, ByteVT, Res, PSHUFBMaskOp);
    DCI.AddToWorklist(Res.getNode());
    return DAG.getBitcast(RootVT, Res);
  }

  // With XOP, if we have a 128-bit binary input shuffle we can always combine
  // to VPPERM. We match the depth requirement of PSHUFB - VPPERM is never
  // slower than PSHUFB on targets that support both.
  if (AllowVariableMask && RootVT.is128BitVector() && Subtarget.hasXOP()) {
    // VPPERM Mask Operation
    // Bits[4:0] - Byte Index (0 - 31)
    // Bits[7:5] - Permute Operation (0 - Source byte, 4 - ZERO)
    SmallVector<SDValue, 16> VPPERMMask;
    int NumBytes = 16;
    int Ratio = NumBytes / NumMaskElts;
    for (int i = 0; i < NumBytes; ++i) {
      int M = Mask[i / Ratio];
      if (M == SM_SentinelUndef) {
        VPPERMMask.push_back(DAG.getUNDEF(MVT::i8));
        continue;
      }
      if (M == SM_SentinelZero) {
        VPPERMMask.push_back(DAG.getConstant(128, DL, MVT::i8));
        continue;
      }
      M = Ratio * M + i % Ratio;
      VPPERMMask.push_back(DAG.getConstant(M, DL, MVT::i8));
    }
    MVT ByteVT = MVT::v16i8;
    V1 = DAG.getBitcast(ByteVT, V1);
    DCI.AddToWorklist(V1.getNode());
    V2 = DAG.getBitcast(ByteVT, V2);
    DCI.AddToWorklist(V2.getNode());
    SDValue VPPERMMaskOp = DAG.getBuildVector(ByteVT, DL, VPPERMMask);
    DCI.AddToWorklist(VPPERMMaskOp.getNode());
    Res = DAG.getNode(X86ISD::VPPERM, DL, ByteVT, V1, V2, VPPERMMaskOp);
    DCI.AddToWorklist(Res.getNode());
    return DAG.getBitcast(RootVT, Res);
  }

  // Failed to find any combines.
  return SDValue();
}

// Attempt to constant fold all of the constant source ops.
// Returns true if the entire shuffle is folded to a constant.
// TODO: Extend this to merge multiple constant Ops and update the mask.
static SDValue combineX86ShufflesConstants(const SmallVectorImpl<SDValue> &Ops,
                                           ArrayRef<int> Mask, SDValue Root,
                                           bool HasVariableMask,
                                           SelectionDAG &DAG,
                                           TargetLowering::DAGCombinerInfo &DCI,
                                           const X86Subtarget &Subtarget) {
  MVT VT = Root.getSimpleValueType();

  unsigned SizeInBits = VT.getSizeInBits();
  unsigned NumMaskElts = Mask.size();
  unsigned MaskSizeInBits = SizeInBits / NumMaskElts;
  unsigned NumOps = Ops.size();

  // Extract constant bits from each source op.
  bool OneUseConstantOp = false;
  SmallVector<APInt, 16> UndefEltsOps(NumOps);
  SmallVector<SmallVector<APInt, 16>, 16> RawBitsOps(NumOps);
  for (unsigned i = 0; i != NumOps; ++i) {
    SDValue SrcOp = Ops[i];
    OneUseConstantOp |= SrcOp.hasOneUse();
    if (!getTargetConstantBitsFromNode(SrcOp, MaskSizeInBits, UndefEltsOps[i],
                                       RawBitsOps[i]))
      return SDValue();
  }

  // Only fold if at least one of the constants is only used once or
  // the combined shuffle has included a variable mask shuffle, this
  // is to avoid constant pool bloat.
  if (!OneUseConstantOp && !HasVariableMask)
    return SDValue();

  // Shuffle the constant bits according to the mask.
  APInt UndefElts(NumMaskElts, 0);
  APInt ZeroElts(NumMaskElts, 0);
  APInt ConstantElts(NumMaskElts, 0);
  SmallVector<APInt, 8> ConstantBitData(NumMaskElts,
                                        APInt::getNullValue(MaskSizeInBits));
  for (unsigned i = 0; i != NumMaskElts; ++i) {
    int M = Mask[i];
    if (M == SM_SentinelUndef) {
      UndefElts.setBit(i);
      continue;
    } else if (M == SM_SentinelZero) {
      ZeroElts.setBit(i);
      continue;
    }
    assert(0 <= M && M < (int)(NumMaskElts * NumOps));

    unsigned SrcOpIdx = (unsigned)M / NumMaskElts;
    unsigned SrcMaskIdx = (unsigned)M % NumMaskElts;

    auto &SrcUndefElts = UndefEltsOps[SrcOpIdx];
    if (SrcUndefElts[SrcMaskIdx]) {
      UndefElts.setBit(i);
      continue;
    }

    auto &SrcEltBits = RawBitsOps[SrcOpIdx];
    APInt &Bits = SrcEltBits[SrcMaskIdx];
    if (!Bits) {
      ZeroElts.setBit(i);
      continue;
    }

    ConstantElts.setBit(i);
    ConstantBitData[i] = Bits;
  }
  assert((UndefElts | ZeroElts | ConstantElts).isAllOnesValue());

  // Create the constant data.
  MVT MaskSVT;
  if (VT.isFloatingPoint() && (MaskSizeInBits == 32 || MaskSizeInBits == 64))
    MaskSVT = MVT::getFloatingPointVT(MaskSizeInBits);
  else
    MaskSVT = MVT::getIntegerVT(MaskSizeInBits);

  MVT MaskVT = MVT::getVectorVT(MaskSVT, NumMaskElts);

  SDLoc DL(Root);
  SDValue CstOp = getConstVector(ConstantBitData, UndefElts, MaskVT, DAG, DL);
  DCI.AddToWorklist(CstOp.getNode());
  return DAG.getBitcast(VT, CstOp);
}

/// \brief Fully generic combining of x86 shuffle instructions.
///
/// This should be the last combine run over the x86 shuffle instructions. Once
/// they have been fully optimized, this will recursively consider all chains
/// of single-use shuffle instructions, build a generic model of the cumulative
/// shuffle operation, and check for simpler instructions which implement this
/// operation. We use this primarily for two purposes:
///
/// 1) Collapse generic shuffles to specialized single instructions when
///    equivalent. In most cases, this is just an encoding size win, but
///    sometimes we will collapse multiple generic shuffles into a single
///    special-purpose shuffle.
/// 2) Look for sequences of shuffle instructions with 3 or more total
///    instructions, and replace them with the slightly more expensive SSSE3
///    PSHUFB instruction if available. We do this as the last combining step
///    to ensure we avoid using PSHUFB if we can implement the shuffle with
///    a suitable short sequence of other instructions. The PSHUFB will either
///    use a register or have to read from memory and so is slightly (but only
///    slightly) more expensive than the other shuffle instructions.
///
/// Because this is inherently a quadratic operation (for each shuffle in
/// a chain, we recurse up the chain), the depth is limited to 8 instructions.
/// This should never be an issue in practice as the shuffle lowering doesn't
/// produce sequences of more than 8 instructions.
///
/// FIXME: We will currently miss some cases where the redundant shuffling
/// would simplify under the threshold for PSHUFB formation because of
/// combine-ordering. To fix this, we should do the redundant instruction
/// combining in this recursive walk.
static SDValue combineX86ShufflesRecursively(
    ArrayRef<SDValue> SrcOps, int SrcOpIndex, SDValue Root,
    ArrayRef<int> RootMask, ArrayRef<const SDNode *> SrcNodes, int Depth,
    bool HasVariableMask, SelectionDAG &DAG,
    TargetLowering::DAGCombinerInfo &DCI, const X86Subtarget &Subtarget) {
  // Bound the depth of our recursive combine because this is ultimately
  // quadratic in nature.
  if (Depth > 8)
    return SDValue();

  // Directly rip through bitcasts to find the underlying operand.
  SDValue Op = SrcOps[SrcOpIndex];
  Op = peekThroughOneUseBitcasts(Op);

  MVT VT = Op.getSimpleValueType();
  if (!VT.isVector())
    return SDValue(); // Bail if we hit a non-vector.

  assert(Root.getSimpleValueType().isVector() &&
         "Shuffles operate on vector types!");
  assert(VT.getSizeInBits() == Root.getSimpleValueType().getSizeInBits() &&
         "Can only combine shuffles of the same vector register size.");

  // Extract target shuffle mask and resolve sentinels and inputs.
  SmallVector<int, 64> OpMask;
  SmallVector<SDValue, 2> OpInputs;
  if (!resolveTargetShuffleInputs(Op, OpInputs, OpMask, DAG))
    return SDValue();

  assert(OpInputs.size() <= 2 && "Too many shuffle inputs");
  SDValue Input0 = (OpInputs.size() > 0 ? OpInputs[0] : SDValue());
  SDValue Input1 = (OpInputs.size() > 1 ? OpInputs[1] : SDValue());

  // Add the inputs to the Ops list, avoiding duplicates.
  SmallVector<SDValue, 16> Ops(SrcOps.begin(), SrcOps.end());

  int InputIdx0 = -1, InputIdx1 = -1;
  for (int i = 0, e = Ops.size(); i < e; ++i) {
    SDValue BC = peekThroughBitcasts(Ops[i]);
    if (Input0 && BC == peekThroughBitcasts(Input0))
      InputIdx0 = i;
    if (Input1 && BC == peekThroughBitcasts(Input1))
      InputIdx1 = i;
  }

  if (Input0 && InputIdx0 < 0) {
    InputIdx0 = SrcOpIndex;
    Ops[SrcOpIndex] = Input0;
  }
  if (Input1 && InputIdx1 < 0) {
    InputIdx1 = Ops.size();
    Ops.push_back(Input1);
  }

  assert(((RootMask.size() > OpMask.size() &&
           RootMask.size() % OpMask.size() == 0) ||
          (OpMask.size() > RootMask.size() &&
           OpMask.size() % RootMask.size() == 0) ||
          OpMask.size() == RootMask.size()) &&
         "The smaller number of elements must divide the larger.");

  // This function can be performance-critical, so we rely on the power-of-2
  // knowledge that we have about the mask sizes to replace div/rem ops with
  // bit-masks and shifts.
  assert(isPowerOf2_32(RootMask.size()) && "Non-power-of-2 shuffle mask sizes");
  assert(isPowerOf2_32(OpMask.size()) && "Non-power-of-2 shuffle mask sizes");
  unsigned RootMaskSizeLog2 = countTrailingZeros(RootMask.size());
  unsigned OpMaskSizeLog2 = countTrailingZeros(OpMask.size());

  unsigned MaskWidth = std::max<unsigned>(OpMask.size(), RootMask.size());
  unsigned RootRatio = std::max<unsigned>(1, OpMask.size() >> RootMaskSizeLog2);
  unsigned OpRatio = std::max<unsigned>(1, RootMask.size() >> OpMaskSizeLog2);
  assert((RootRatio == 1 || OpRatio == 1) &&
         "Must not have a ratio for both incoming and op masks!");

  assert(isPowerOf2_32(MaskWidth) && "Non-power-of-2 shuffle mask sizes");
  assert(isPowerOf2_32(RootRatio) && "Non-power-of-2 shuffle mask sizes");
  assert(isPowerOf2_32(OpRatio) && "Non-power-of-2 shuffle mask sizes");
  unsigned RootRatioLog2 = countTrailingZeros(RootRatio);
  unsigned OpRatioLog2 = countTrailingZeros(OpRatio);

  SmallVector<int, 64> Mask(MaskWidth, SM_SentinelUndef);

  // Merge this shuffle operation's mask into our accumulated mask. Note that
  // this shuffle's mask will be the first applied to the input, followed by the
  // root mask to get us all the way to the root value arrangement. The reason
  // for this order is that we are recursing up the operation chain.
  for (unsigned i = 0; i < MaskWidth; ++i) {
    unsigned RootIdx = i >> RootRatioLog2;
    if (RootMask[RootIdx] < 0) {
      // This is a zero or undef lane, we're done.
      Mask[i] = RootMask[RootIdx];
      continue;
    }

    unsigned RootMaskedIdx =
        RootRatio == 1
            ? RootMask[RootIdx]
            : (RootMask[RootIdx] << RootRatioLog2) + (i & (RootRatio - 1));

    // Just insert the scaled root mask value if it references an input other
    // than the SrcOp we're currently inserting.
    if ((RootMaskedIdx < (SrcOpIndex * MaskWidth)) ||
        (((SrcOpIndex + 1) * MaskWidth) <= RootMaskedIdx)) {
      Mask[i] = RootMaskedIdx;
      continue;
    }

    RootMaskedIdx = RootMaskedIdx & (MaskWidth - 1);
    unsigned OpIdx = RootMaskedIdx >> OpRatioLog2;
    if (OpMask[OpIdx] < 0) {
      // The incoming lanes are zero or undef, it doesn't matter which ones we
      // are using.
      Mask[i] = OpMask[OpIdx];
      continue;
    }

    // Ok, we have non-zero lanes, map them through to one of the Op's inputs.
    unsigned OpMaskedIdx =
        OpRatio == 1
            ? OpMask[OpIdx]
            : (OpMask[OpIdx] << OpRatioLog2) + (RootMaskedIdx & (OpRatio - 1));

    OpMaskedIdx = OpMaskedIdx & (MaskWidth - 1);
    if (OpMask[OpIdx] < (int)OpMask.size()) {
      assert(0 <= InputIdx0 && "Unknown target shuffle input");
      OpMaskedIdx += InputIdx0 * MaskWidth;
    } else {
      assert(0 <= InputIdx1 && "Unknown target shuffle input");
      OpMaskedIdx += InputIdx1 * MaskWidth;
    }

    Mask[i] = OpMaskedIdx;
  }

  // Handle the all undef/zero cases early.
  if (all_of(Mask, [](int Idx) { return Idx == SM_SentinelUndef; }))
    return DAG.getUNDEF(Root.getValueType());

  // TODO - should we handle the mixed zero/undef case as well? Just returning
  // a zero mask will lose information on undef elements possibly reducing
  // future combine possibilities.
  if (all_of(Mask, [](int Idx) { return Idx < 0; }))
    return getZeroVector(Root.getSimpleValueType(), Subtarget, DAG,
                         SDLoc(Root));

  // Remove unused shuffle source ops.
  resolveTargetShuffleInputsAndMask(Ops, Mask);
  assert(!Ops.empty() && "Shuffle with no inputs detected");

  HasVariableMask |= isTargetShuffleVariableMask(Op.getOpcode());

  // Update the list of shuffle nodes that have been combined so far.
  SmallVector<const SDNode *, 16> CombinedNodes(SrcNodes.begin(),
                                                SrcNodes.end());
  CombinedNodes.push_back(Op.getNode());

  // See if we can recurse into each shuffle source op (if it's a target
  // shuffle). The source op should only be combined if it either has a
  // single use (i.e. current Op) or all its users have already been combined.
  for (int i = 0, e = Ops.size(); i < e; ++i)
    if (Ops[i].getNode()->hasOneUse() ||
        SDNode::areOnlyUsersOf(CombinedNodes, Ops[i].getNode()))
      if (SDValue Res = combineX86ShufflesRecursively(
              Ops, i, Root, Mask, CombinedNodes, Depth + 1, HasVariableMask,
              DAG, DCI, Subtarget))
        return Res;

  // Attempt to constant fold all of the constant source ops.
  if (SDValue Cst = combineX86ShufflesConstants(
          Ops, Mask, Root, HasVariableMask, DAG, DCI, Subtarget))
    return Cst;

  // We can only combine unary and binary shuffle mask cases.
  if (Ops.size() > 2)
    return SDValue();

  // Minor canonicalization of the accumulated shuffle mask to make it easier
  // to match below. All this does is detect masks with sequential pairs of
  // elements, and shrink them to the half-width mask. It does this in a loop
  // so it will reduce the size of the mask to the minimal width mask which
  // performs an equivalent shuffle.
  SmallVector<int, 64> WidenedMask;
  while (Mask.size() > 1 && canWidenShuffleElements(Mask, WidenedMask)) {
    Mask = std::move(WidenedMask);
  }

  // Canonicalization of binary shuffle masks to improve pattern matching by
  // commuting the inputs.
  if (Ops.size() == 2 && canonicalizeShuffleMaskWithCommute(Mask)) {
    ShuffleVectorSDNode::commuteMask(Mask);
    std::swap(Ops[0], Ops[1]);
  }

  // Finally, try to combine into a single shuffle instruction.
  return combineX86ShuffleChain(Ops, Root, Mask, Depth, HasVariableMask, DAG,
                                DCI, Subtarget);
}

/// \brief Get the PSHUF-style mask from PSHUF node.
///
/// This is a very minor wrapper around getTargetShuffleMask to easy forming v4
/// PSHUF-style masks that can be reused with such instructions.
static SmallVector<int, 4> getPSHUFShuffleMask(SDValue N) {
  MVT VT = N.getSimpleValueType();
  SmallVector<int, 4> Mask;
  SmallVector<SDValue, 2> Ops;
  bool IsUnary;
  bool HaveMask =
      getTargetShuffleMask(N.getNode(), VT, false, Ops, Mask, IsUnary);
  (void)HaveMask;
  assert(HaveMask);

  // If we have more than 128-bits, only the low 128-bits of shuffle mask
  // matter. Check that the upper masks are repeats and remove them.
  if (VT.getSizeInBits() > 128) {
    int LaneElts = 128 / VT.getScalarSizeInBits();
#ifndef NDEBUG
    for (int i = 1, NumLanes = VT.getSizeInBits() / 128; i < NumLanes; ++i)
      for (int j = 0; j < LaneElts; ++j)
        assert(Mask[j] == Mask[i * LaneElts + j] - (LaneElts * i) &&
               "Mask doesn't repeat in high 128-bit lanes!");
#endif
    Mask.resize(LaneElts);
  }

  switch (N.getOpcode()) {
  case X86ISD::PSHUFD:
    return Mask;
  case X86ISD::PSHUFLW:
    Mask.resize(4);
    return Mask;
  case X86ISD::PSHUFHW:
    Mask.erase(Mask.begin(), Mask.begin() + 4);
    for (int &M : Mask)
      M -= 4;
    return Mask;
  default:
    llvm_unreachable("No valid shuffle instruction found!");
  }
}

/// \brief Search for a combinable shuffle across a chain ending in pshufd.
///
/// We walk up the chain and look for a combinable shuffle, skipping over
/// shuffles that we could hoist this shuffle's transformation past without
/// altering anything.
static SDValue
combineRedundantDWordShuffle(SDValue N, MutableArrayRef<int> Mask,
                             SelectionDAG &DAG) {
  assert(N.getOpcode() == X86ISD::PSHUFD &&
         "Called with something other than an x86 128-bit half shuffle!");
  SDLoc DL(N);

  // Walk up a single-use chain looking for a combinable shuffle. Keep a stack
  // of the shuffles in the chain so that we can form a fresh chain to replace
  // this one.
  SmallVector<SDValue, 8> Chain;
  SDValue V = N.getOperand(0);
  for (; V.hasOneUse(); V = V.getOperand(0)) {
    switch (V.getOpcode()) {
    default:
      return SDValue(); // Nothing combined!

    case ISD::BITCAST:
      // Skip bitcasts as we always know the type for the target specific
      // instructions.
      continue;

    case X86ISD::PSHUFD:
      // Found another dword shuffle.
      break;

    case X86ISD::PSHUFLW:
      // Check that the low words (being shuffled) are the identity in the
      // dword shuffle, and the high words are self-contained.
      if (Mask[0] != 0 || Mask[1] != 1 ||
          !(Mask[2] >= 2 && Mask[2] < 4 && Mask[3] >= 2 && Mask[3] < 4))
        return SDValue();

      Chain.push_back(V);
      continue;

    case X86ISD::PSHUFHW:
      // Check that the high words (being shuffled) are the identity in the
      // dword shuffle, and the low words are self-contained.
      if (Mask[2] != 2 || Mask[3] != 3 ||
          !(Mask[0] >= 0 && Mask[0] < 2 && Mask[1] >= 0 && Mask[1] < 2))
        return SDValue();

      Chain.push_back(V);
      continue;

    case X86ISD::UNPCKL:
    case X86ISD::UNPCKH:
      // For either i8 -> i16 or i16 -> i32 unpacks, we can combine a dword
      // shuffle into a preceding word shuffle.
      if (V.getSimpleValueType().getVectorElementType() != MVT::i8 &&
          V.getSimpleValueType().getVectorElementType() != MVT::i16)
        return SDValue();

      // Search for a half-shuffle which we can combine with.
      unsigned CombineOp =
          V.getOpcode() == X86ISD::UNPCKL ? X86ISD::PSHUFLW : X86ISD::PSHUFHW;
      if (V.getOperand(0) != V.getOperand(1) ||
          !V->isOnlyUserOf(V.getOperand(0).getNode()))
        return SDValue();
      Chain.push_back(V);
      V = V.getOperand(0);
      do {
        switch (V.getOpcode()) {
        default:
          return SDValue(); // Nothing to combine.

        case X86ISD::PSHUFLW:
        case X86ISD::PSHUFHW:
          if (V.getOpcode() == CombineOp)
            break;

          Chain.push_back(V);

          LLVM_FALLTHROUGH;
        case ISD::BITCAST:
          V = V.getOperand(0);
          continue;
        }
        break;
      } while (V.hasOneUse());
      break;
    }
    // Break out of the loop if we break out of the switch.
    break;
  }

  if (!V.hasOneUse())
    // We fell out of the loop without finding a viable combining instruction.
    return SDValue();

  // Merge this node's mask and our incoming mask.
  SmallVector<int, 4> VMask = getPSHUFShuffleMask(V);
  for (int &M : Mask)
    M = VMask[M];
  V = DAG.getNode(V.getOpcode(), DL, V.getValueType(), V.getOperand(0),
                  getV4X86ShuffleImm8ForMask(Mask, DL, DAG));

  // Rebuild the chain around this new shuffle.
  while (!Chain.empty()) {
    SDValue W = Chain.pop_back_val();

    if (V.getValueType() != W.getOperand(0).getValueType())
      V = DAG.getBitcast(W.getOperand(0).getValueType(), V);

    switch (W.getOpcode()) {
    default:
      llvm_unreachable("Only PSHUF and UNPCK instructions get here!");

    case X86ISD::UNPCKL:
    case X86ISD::UNPCKH:
      V = DAG.getNode(W.getOpcode(), DL, W.getValueType(), V, V);
      break;

    case X86ISD::PSHUFD:
    case X86ISD::PSHUFLW:
    case X86ISD::PSHUFHW:
      V = DAG.getNode(W.getOpcode(), DL, W.getValueType(), V, W.getOperand(1));
      break;
    }
  }
  if (V.getValueType() != N.getValueType())
    V = DAG.getBitcast(N.getValueType(), V);

  // Return the new chain to replace N.
  return V;
}

/// \brief Search for a combinable shuffle across a chain ending in pshuflw or
/// pshufhw.
///
/// We walk up the chain, skipping shuffles of the other half and looking
/// through shuffles which switch halves trying to find a shuffle of the same
/// pair of dwords.
static bool combineRedundantHalfShuffle(SDValue N, MutableArrayRef<int> Mask,
                                        SelectionDAG &DAG,
                                        TargetLowering::DAGCombinerInfo &DCI) {
  assert(
      (N.getOpcode() == X86ISD::PSHUFLW || N.getOpcode() == X86ISD::PSHUFHW) &&
      "Called with something other than an x86 128-bit half shuffle!");
  SDLoc DL(N);
  unsigned CombineOpcode = N.getOpcode();

  // Walk up a single-use chain looking for a combinable shuffle.
  SDValue V = N.getOperand(0);
  for (; V.hasOneUse(); V = V.getOperand(0)) {
    switch (V.getOpcode()) {
    default:
      return false; // Nothing combined!

    case ISD::BITCAST:
      // Skip bitcasts as we always know the type for the target specific
      // instructions.
      continue;

    case X86ISD::PSHUFLW:
    case X86ISD::PSHUFHW:
      if (V.getOpcode() == CombineOpcode)
        break;

      // Other-half shuffles are no-ops.
      continue;
    }
    // Break out of the loop if we break out of the switch.
    break;
  }

  if (!V.hasOneUse())
    // We fell out of the loop without finding a viable combining instruction.
    return false;

  // Combine away the bottom node as its shuffle will be accumulated into
  // a preceding shuffle.
  DCI.CombineTo(N.getNode(), N.getOperand(0), /*AddTo*/ true);

  // Record the old value.
  SDValue Old = V;

  // Merge this node's mask and our incoming mask (adjusted to account for all
  // the pshufd instructions encountered).
  SmallVector<int, 4> VMask = getPSHUFShuffleMask(V);
  for (int &M : Mask)
    M = VMask[M];
  V = DAG.getNode(V.getOpcode(), DL, MVT::v8i16, V.getOperand(0),
                  getV4X86ShuffleImm8ForMask(Mask, DL, DAG));

  // Check that the shuffles didn't cancel each other out. If not, we need to
  // combine to the new one.
  if (Old != V)
    // Replace the combinable shuffle with the combined one, updating all users
    // so that we re-evaluate the chain here.
    DCI.CombineTo(Old.getNode(), V, /*AddTo*/ true);

  return true;
}

/// \brief Try to combine x86 target specific shuffles.
static SDValue combineTargetShuffle(SDValue N, SelectionDAG &DAG,
                                    TargetLowering::DAGCombinerInfo &DCI,
                                    const X86Subtarget &Subtarget) {
  SDLoc DL(N);
  MVT VT = N.getSimpleValueType();
  SmallVector<int, 4> Mask;
  unsigned Opcode = N.getOpcode();

  // Combine binary shuffle of 2 similar 'Horizontal' instructions into a
  // single instruction.
  if (VT.getScalarSizeInBits() == 64 &&
      (Opcode == X86ISD::MOVSD || Opcode == X86ISD::UNPCKH ||
       Opcode == X86ISD::UNPCKL)) {
    auto BC0 = peekThroughBitcasts(N.getOperand(0));
    auto BC1 = peekThroughBitcasts(N.getOperand(1));
    EVT VT0 = BC0.getValueType();
    EVT VT1 = BC1.getValueType();
    unsigned Opcode0 = BC0.getOpcode();
    unsigned Opcode1 = BC1.getOpcode();
    if (Opcode0 == Opcode1 && VT0 == VT1 &&
        (Opcode0 == X86ISD::FHADD || Opcode0 == X86ISD::HADD ||
         Opcode0 == X86ISD::FHSUB || Opcode0 == X86ISD::HSUB ||
         Opcode0 == X86ISD::PACKSS || Opcode0 == X86ISD::PACKUS)) {
      SDValue Lo, Hi;
      if (Opcode == X86ISD::MOVSD) {
        Lo = BC1.getOperand(0);
        Hi = BC0.getOperand(1);
      } else {
        Lo = BC0.getOperand(Opcode == X86ISD::UNPCKH ? 1 : 0);
        Hi = BC1.getOperand(Opcode == X86ISD::UNPCKH ? 1 : 0);
      }
      SDValue Horiz = DAG.getNode(Opcode0, DL, VT0, Lo, Hi);
      DCI.AddToWorklist(Horiz.getNode());
      return DAG.getBitcast(VT, Horiz);
    }
  }

  switch (Opcode) {
  case X86ISD::PSHUFD:
  case X86ISD::PSHUFLW:
  case X86ISD::PSHUFHW:
    Mask = getPSHUFShuffleMask(N);
    assert(Mask.size() == 4);
    break;
  case X86ISD::UNPCKL: {
    // Combine X86ISD::UNPCKL and ISD::VECTOR_SHUFFLE into X86ISD::UNPCKH, in
    // which X86ISD::UNPCKL has a ISD::UNDEF operand, and ISD::VECTOR_SHUFFLE
    // moves upper half elements into the lower half part. For example:
    //
    // t2: v16i8 = vector_shuffle<8,9,10,11,12,13,14,15,u,u,u,u,u,u,u,u> t1,
    //     undef:v16i8
    // t3: v16i8 = X86ISD::UNPCKL undef:v16i8, t2
    //
    // will be combined to:
    //
    // t3: v16i8 = X86ISD::UNPCKH undef:v16i8, t1

    // This is only for 128-bit vectors. From SSE4.1 onward this combine may not
    // happen due to advanced instructions.
    if (!VT.is128BitVector())
      return SDValue();

    auto Op0 = N.getOperand(0);
    auto Op1 = N.getOperand(1);
    if (Op0.isUndef() && Op1.getOpcode() == ISD::VECTOR_SHUFFLE) {
      ArrayRef<int> Mask = cast<ShuffleVectorSDNode>(Op1.getNode())->getMask();

      unsigned NumElts = VT.getVectorNumElements();
      SmallVector<int, 8> ExpectedMask(NumElts, -1);
      std::iota(ExpectedMask.begin(), ExpectedMask.begin() + NumElts / 2,
                NumElts / 2);

      auto ShufOp = Op1.getOperand(0);
      if (isShuffleEquivalent(Op1, ShufOp, Mask, ExpectedMask))
        return DAG.getNode(X86ISD::UNPCKH, DL, VT, N.getOperand(0), ShufOp);
    }
    return SDValue();
  }
  case X86ISD::BLENDI: {
    SDValue V0 = N->getOperand(0);
    SDValue V1 = N->getOperand(1);
    assert(VT == V0.getSimpleValueType() && VT == V1.getSimpleValueType() &&
           "Unexpected input vector types");

    // Canonicalize a v2f64 blend with a mask of 2 by swapping the vector
    // operands and changing the mask to 1. This saves us a bunch of
    // pattern-matching possibilities related to scalar math ops in SSE/AVX.
    // x86InstrInfo knows how to commute this back after instruction selection
    // if it would help register allocation.

    // TODO: If optimizing for size or a processor that doesn't suffer from
    // partial register update stalls, this should be transformed into a MOVSD
    // instruction because a MOVSD is 1-2 bytes smaller than a BLENDPD.

    if (VT == MVT::v2f64)
      if (auto *Mask = dyn_cast<ConstantSDNode>(N->getOperand(2)))
        if (Mask->getZExtValue() == 2 && !isShuffleFoldableLoad(V0)) {
          SDValue NewMask = DAG.getConstant(1, DL, MVT::i8);
          return DAG.getNode(X86ISD::BLENDI, DL, VT, V1, V0, NewMask);
        }

    return SDValue();
  }
  case X86ISD::MOVSD:
  case X86ISD::MOVSS: {
    SDValue V0 = peekThroughBitcasts(N->getOperand(0));
    SDValue V1 = peekThroughBitcasts(N->getOperand(1));
    bool isZero0 = ISD::isBuildVectorAllZeros(V0.getNode());
    bool isZero1 = ISD::isBuildVectorAllZeros(V1.getNode());
    if (isZero0 && isZero1)
      return SDValue();

    // We often lower to MOVSD/MOVSS from integer as well as native float
    // types; remove unnecessary domain-crossing bitcasts if we can to make it
    // easier to combine shuffles later on. We've already accounted for the
    // domain switching cost when we decided to lower with it.
    bool isFloat = VT.isFloatingPoint();
    bool isFloat0 = V0.getSimpleValueType().isFloatingPoint();
    bool isFloat1 = V1.getSimpleValueType().isFloatingPoint();
    if ((isFloat != isFloat0 || isZero0) && (isFloat != isFloat1 || isZero1)) {
      MVT NewVT = isFloat ? (X86ISD::MOVSD == Opcode ? MVT::v2i64 : MVT::v4i32)
                          : (X86ISD::MOVSD == Opcode ? MVT::v2f64 : MVT::v4f32);
      V0 = DAG.getBitcast(NewVT, V0);
      V1 = DAG.getBitcast(NewVT, V1);
      return DAG.getBitcast(VT, DAG.getNode(Opcode, DL, NewVT, V0, V1));
    }

    return SDValue();
  }
  case X86ISD::INSERTPS: {
    assert(VT == MVT::v4f32 && "INSERTPS ValueType must be MVT::v4f32");
    SDValue Op0 = N.getOperand(0);
    SDValue Op1 = N.getOperand(1);
    SDValue Op2 = N.getOperand(2);
    unsigned InsertPSMask = cast<ConstantSDNode>(Op2)->getZExtValue();
    unsigned SrcIdx = (InsertPSMask >> 6) & 0x3;
    unsigned DstIdx = (InsertPSMask >> 4) & 0x3;
    unsigned ZeroMask = InsertPSMask & 0xF;

    // If we zero out all elements from Op0 then we don't need to reference it.
    if (((ZeroMask | (1u << DstIdx)) == 0xF) && !Op0.isUndef())
      return DAG.getNode(X86ISD::INSERTPS, DL, VT, DAG.getUNDEF(VT), Op1,
                         DAG.getConstant(InsertPSMask, DL, MVT::i8));

    // If we zero out the element from Op1 then we don't need to reference it.
    if ((ZeroMask & (1u << DstIdx)) && !Op1.isUndef())
      return DAG.getNode(X86ISD::INSERTPS, DL, VT, Op0, DAG.getUNDEF(VT),
                         DAG.getConstant(InsertPSMask, DL, MVT::i8));

    // Attempt to merge insertps Op1 with an inner target shuffle node.
    SmallVector<int, 8> TargetMask1;
    SmallVector<SDValue, 2> Ops1;
    if (setTargetShuffleZeroElements(Op1, TargetMask1, Ops1)) {
      int M = TargetMask1[SrcIdx];
      if (isUndefOrZero(M)) {
        // Zero/UNDEF insertion - zero out element and remove dependency.
        InsertPSMask |= (1u << DstIdx);
        return DAG.getNode(X86ISD::INSERTPS, DL, VT, Op0, DAG.getUNDEF(VT),
                           DAG.getConstant(InsertPSMask, DL, MVT::i8));
      }
      // Update insertps mask srcidx and reference the source input directly.
      assert(0 <= M && M < 8 && "Shuffle index out of range");
      InsertPSMask = (InsertPSMask & 0x3f) | ((M & 0x3) << 6);
      Op1 = Ops1[M < 4 ? 0 : 1];
      return DAG.getNode(X86ISD::INSERTPS, DL, VT, Op0, Op1,
                         DAG.getConstant(InsertPSMask, DL, MVT::i8));
    }

    // Attempt to merge insertps Op0 with an inner target shuffle node.
    SmallVector<int, 8> TargetMask0;
    SmallVector<SDValue, 2> Ops0;
    if (!setTargetShuffleZeroElements(Op0, TargetMask0, Ops0))
      return SDValue();

    bool Updated = false;
    bool UseInput00 = false;
    bool UseInput01 = false;
    for (int i = 0; i != 4; ++i) {
      int M = TargetMask0[i];
      if ((InsertPSMask & (1u << i)) || (i == (int)DstIdx)) {
        // No change if element is already zero or the inserted element.
        continue;
      } else if (isUndefOrZero(M)) {
        // If the target mask is undef/zero then we must zero the element.
        InsertPSMask |= (1u << i);
        Updated = true;
        continue;
      }

      // The input vector element must be inline.
      if (M != i && M != (i + 4))
        return SDValue();

      // Determine which inputs of the target shuffle we're using.
      UseInput00 |= (0 <= M && M < 4);
      UseInput01 |= (4 <= M);
    }

    // If we're not using both inputs of the target shuffle then use the
    // referenced input directly.
    if (UseInput00 && !UseInput01) {
      Updated = true;
      Op0 = Ops0[0];
    } else if (!UseInput00 && UseInput01) {
      Updated = true;
      Op0 = Ops0[1];
    }

    if (Updated)
      return DAG.getNode(X86ISD::INSERTPS, DL, VT, Op0, Op1,
                         DAG.getConstant(InsertPSMask, DL, MVT::i8));

    return SDValue();
  }
  default:
    return SDValue();
  }

  // Nuke no-op shuffles that show up after combining.
  if (isNoopShuffleMask(Mask))
    return DCI.CombineTo(N.getNode(), N.getOperand(0), /*AddTo*/ true);

  // Look for simplifications involving one or two shuffle instructions.
  SDValue V = N.getOperand(0);
  switch (N.getOpcode()) {
  default:
    break;
  case X86ISD::PSHUFLW:
  case X86ISD::PSHUFHW:
    assert(VT.getVectorElementType() == MVT::i16 && "Bad word shuffle type!");

    if (combineRedundantHalfShuffle(N, Mask, DAG, DCI))
      return SDValue(); // We combined away this shuffle, so we're done.

    // See if this reduces to a PSHUFD which is no more expensive and can
    // combine with more operations. Note that it has to at least flip the
    // dwords as otherwise it would have been removed as a no-op.
    if (makeArrayRef(Mask).equals({2, 3, 0, 1})) {
      int DMask[] = {0, 1, 2, 3};
      int DOffset = N.getOpcode() == X86ISD::PSHUFLW ? 0 : 2;
      DMask[DOffset + 0] = DOffset + 1;
      DMask[DOffset + 1] = DOffset + 0;
      MVT DVT = MVT::getVectorVT(MVT::i32, VT.getVectorNumElements() / 2);
      V = DAG.getBitcast(DVT, V);
      DCI.AddToWorklist(V.getNode());
      V = DAG.getNode(X86ISD::PSHUFD, DL, DVT, V,
                      getV4X86ShuffleImm8ForMask(DMask, DL, DAG));
      DCI.AddToWorklist(V.getNode());
      return DAG.getBitcast(VT, V);
    }

    // Look for shuffle patterns which can be implemented as a single unpack.
    // FIXME: This doesn't handle the location of the PSHUFD generically, and
    // only works when we have a PSHUFD followed by two half-shuffles.
    if (Mask[0] == Mask[1] && Mask[2] == Mask[3] &&
        (V.getOpcode() == X86ISD::PSHUFLW ||
         V.getOpcode() == X86ISD::PSHUFHW) &&
        V.getOpcode() != N.getOpcode() &&
        V.hasOneUse()) {
      SDValue D = peekThroughOneUseBitcasts(V.getOperand(0));
      if (D.getOpcode() == X86ISD::PSHUFD && D.hasOneUse()) {
        SmallVector<int, 4> VMask = getPSHUFShuffleMask(V);
        SmallVector<int, 4> DMask = getPSHUFShuffleMask(D);
        int NOffset = N.getOpcode() == X86ISD::PSHUFLW ? 0 : 4;
        int VOffset = V.getOpcode() == X86ISD::PSHUFLW ? 0 : 4;
        int WordMask[8];
        for (int i = 0; i < 4; ++i) {
          WordMask[i + NOffset] = Mask[i] + NOffset;
          WordMask[i + VOffset] = VMask[i] + VOffset;
        }
        // Map the word mask through the DWord mask.
        int MappedMask[8];
        for (int i = 0; i < 8; ++i)
          MappedMask[i] = 2 * DMask[WordMask[i] / 2] + WordMask[i] % 2;
        if (makeArrayRef(MappedMask).equals({0, 0, 1, 1, 2, 2, 3, 3}) ||
            makeArrayRef(MappedMask).equals({4, 4, 5, 5, 6, 6, 7, 7})) {
          // We can replace all three shuffles with an unpack.
          V = DAG.getBitcast(VT, D.getOperand(0));
          DCI.AddToWorklist(V.getNode());
          return DAG.getNode(MappedMask[0] == 0 ? X86ISD::UNPCKL
                                                : X86ISD::UNPCKH,
                             DL, VT, V, V);
        }
      }
    }

    break;

  case X86ISD::PSHUFD:
    if (SDValue NewN = combineRedundantDWordShuffle(N, Mask, DAG))
      return NewN;

    break;
  }

  return SDValue();
}

/// Returns true iff the shuffle node \p N can be replaced with ADDSUB
/// operation. If true is returned then the operands of ADDSUB operation
/// are written to the parameters \p Opnd0 and \p Opnd1.
///
/// We combine shuffle to ADDSUB directly on the abstract vector shuffle nodes
/// so it is easier to generically match. We also insert dummy vector shuffle
/// nodes for the operands which explicitly discard the lanes which are unused
/// by this operation to try to flow through the rest of the combiner
/// the fact that they're unused.
static bool isAddSub(SDNode *N, const X86Subtarget &Subtarget,
                     SDValue &Opnd0, SDValue &Opnd1) {

  EVT VT = N->getValueType(0);
  if ((!Subtarget.hasSSE3() || (VT != MVT::v4f32 && VT != MVT::v2f64)) &&
      (!Subtarget.hasAVX() || (VT != MVT::v8f32 && VT != MVT::v4f64)) &&
      (!Subtarget.hasAVX512() || (VT != MVT::v16f32 && VT != MVT::v8f64)))
    return false;

  // We only handle target-independent shuffles.
  // FIXME: It would be easy and harmless to use the target shuffle mask
  // extraction tool to support more.
  if (N->getOpcode() != ISD::VECTOR_SHUFFLE)
    return false;

  ArrayRef<int> OrigMask = cast<ShuffleVectorSDNode>(N)->getMask();
  SmallVector<int, 16> Mask(OrigMask.begin(), OrigMask.end());

  SDValue V1 = N->getOperand(0);
  SDValue V2 = N->getOperand(1);

  // We require the first shuffle operand to be the FSUB node, and the second to
  // be the FADD node.
  if (V1.getOpcode() == ISD::FADD && V2.getOpcode() == ISD::FSUB) {
    ShuffleVectorSDNode::commuteMask(Mask);
    std::swap(V1, V2);
  } else if (V1.getOpcode() != ISD::FSUB || V2.getOpcode() != ISD::FADD)
    return false;

  // If there are other uses of these operations we can't fold them.
  if (!V1->hasOneUse() || !V2->hasOneUse())
    return false;

  // Ensure that both operations have the same operands. Note that we can
  // commute the FADD operands.
  SDValue LHS = V1->getOperand(0), RHS = V1->getOperand(1);
  if ((V2->getOperand(0) != LHS || V2->getOperand(1) != RHS) &&
      (V2->getOperand(0) != RHS || V2->getOperand(1) != LHS))
    return false;

  // We're looking for blends between FADD and FSUB nodes. We insist on these
  // nodes being lined up in a specific expected pattern.
  if (!(isShuffleEquivalent(V1, V2, Mask, {0, 3}) ||
        isShuffleEquivalent(V1, V2, Mask, {0, 5, 2, 7}) ||
        isShuffleEquivalent(V1, V2, Mask, {0, 9, 2, 11, 4, 13, 6, 15}) ||
        isShuffleEquivalent(V1, V2, Mask, {0, 17, 2, 19, 4, 21, 6, 23,
                                           8, 25, 10, 27, 12, 29, 14, 31})))
    return false;

  Opnd0 = LHS;
  Opnd1 = RHS;
  return true;
}

/// \brief Try to combine a shuffle into a target-specific add-sub or
/// mul-add-sub node.
static SDValue combineShuffleToAddSubOrFMAddSub(SDNode *N,
                                                const X86Subtarget &Subtarget,
                                                SelectionDAG &DAG) {
  SDValue Opnd0, Opnd1;
  if (!isAddSub(N, Subtarget, Opnd0, Opnd1))
    return SDValue();

  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // Try to generate X86ISD::FMADDSUB node here.
  SDValue Opnd2;
  if (isFMAddSub(Subtarget, DAG, Opnd0, Opnd1, Opnd2))
    return DAG.getNode(X86ISD::FMADDSUB, DL, VT, Opnd0, Opnd1, Opnd2);

  // Do not generate X86ISD::ADDSUB node for 512-bit types even though
  // the ADDSUB idiom has been successfully recognized. There are no known
  // X86 targets with 512-bit ADDSUB instructions!
  if (VT.is512BitVector())
    return SDValue();

  return DAG.getNode(X86ISD::ADDSUB, DL, VT, Opnd0, Opnd1);
}

// We are looking for a shuffle where both sources are concatenated with undef
// and have a width that is half of the output's width. AVX2 has VPERMD/Q, so
// if we can express this as a single-source shuffle, that's preferable.
static SDValue combineShuffleOfConcatUndef(SDNode *N, SelectionDAG &DAG,
                                           const X86Subtarget &Subtarget) {
  if (!Subtarget.hasAVX2() || !isa<ShuffleVectorSDNode>(N))
    return SDValue();

  EVT VT = N->getValueType(0);

  // We only care about shuffles of 128/256-bit vectors of 32/64-bit values.
  if (!VT.is128BitVector() && !VT.is256BitVector())
    return SDValue();

  if (VT.getVectorElementType() != MVT::i32 &&
      VT.getVectorElementType() != MVT::i64 &&
      VT.getVectorElementType() != MVT::f32 &&
      VT.getVectorElementType() != MVT::f64)
    return SDValue();

  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);

  // Check that both sources are concats with undef.
  if (N0.getOpcode() != ISD::CONCAT_VECTORS ||
      N1.getOpcode() != ISD::CONCAT_VECTORS || N0.getNumOperands() != 2 ||
      N1.getNumOperands() != 2 || !N0.getOperand(1).isUndef() ||
      !N1.getOperand(1).isUndef())
    return SDValue();

  // Construct the new shuffle mask. Elements from the first source retain their
  // index, but elements from the second source no longer need to skip an undef.
  SmallVector<int, 8> Mask;
  int NumElts = VT.getVectorNumElements();

  ShuffleVectorSDNode *SVOp = cast<ShuffleVectorSDNode>(N);
  for (int Elt : SVOp->getMask())
    Mask.push_back(Elt < NumElts ? Elt : (Elt - NumElts / 2));

  SDLoc DL(N);
  SDValue Concat = DAG.getNode(ISD::CONCAT_VECTORS, DL, VT, N0.getOperand(0),
                               N1.getOperand(0));
  return DAG.getVectorShuffle(VT, DL, Concat, DAG.getUNDEF(VT), Mask);
}

/// Eliminate a redundant shuffle of a horizontal math op.
static SDValue foldShuffleOfHorizOp(SDNode *N) {
  if (N->getOpcode() != ISD::VECTOR_SHUFFLE || !N->getOperand(1).isUndef())
    return SDValue();

  SDValue HOp = N->getOperand(0);
  if (HOp.getOpcode() != X86ISD::HADD && HOp.getOpcode() != X86ISD::FHADD &&
      HOp.getOpcode() != X86ISD::HSUB && HOp.getOpcode() != X86ISD::FHSUB)
    return SDValue();

  // 128-bit horizontal math instructions are defined to operate on adjacent
  // lanes of each operand as:
  // v4X32: A[0] + A[1] , A[2] + A[3] , B[0] + B[1] , B[2] + B[3]
  // ...similarly for v2f64 and v8i16.
  // TODO: 256-bit is not the same because...x86.
  if (HOp.getOperand(0) != HOp.getOperand(1) || HOp.getValueSizeInBits() != 128)
    return SDValue();

  // When the operands of a horizontal math op are identical, the low half of
  // the result is the same as the high half. If the shuffle is also replicating
  // low and high halves, we don't need the shuffle.
  // shuffle (hadd X, X), undef, [low half...high half] --> hadd X, X
  ArrayRef<int> Mask = cast<ShuffleVectorSDNode>(N)->getMask();
  // TODO: Other mask possibilities like {1,1} and {1,0} could be added here,
  // but this should be tied to whatever horizontal op matching and shuffle
  // canonicalization are producing.
  if (isTargetShuffleEquivalent(Mask, { 0, 0 }) ||
      isTargetShuffleEquivalent(Mask, { 0, 1, 0, 1 }) ||
      isTargetShuffleEquivalent(Mask, { 0, 1, 2, 3, 0, 1, 2, 3 }))
    return HOp;

  return SDValue();
}

static SDValue combineShuffle(SDNode *N, SelectionDAG &DAG,
                              TargetLowering::DAGCombinerInfo &DCI,
                              const X86Subtarget &Subtarget) {
  SDLoc dl(N);
  EVT VT = N->getValueType(0);
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  // If we have legalized the vector types, look for blends of FADD and FSUB
  // nodes that we can fuse into an ADDSUB node.
  if (TLI.isTypeLegal(VT)) {
    if (SDValue AddSub = combineShuffleToAddSubOrFMAddSub(N, Subtarget, DAG))
      return AddSub;

    if (SDValue HAddSub = foldShuffleOfHorizOp(N))
      return HAddSub;
  }

  // During Type Legalization, when promoting illegal vector types,
  // the backend might introduce new shuffle dag nodes and bitcasts.
  //
  // This code performs the following transformation:
  // fold: (shuffle (bitcast (BINOP A, B)), Undef, <Mask>) ->
  //       (shuffle (BINOP (bitcast A), (bitcast B)), Undef, <Mask>)
  //
  // We do this only if both the bitcast and the BINOP dag nodes have
  // one use. Also, perform this transformation only if the new binary
  // operation is legal. This is to avoid introducing dag nodes that
  // potentially need to be further expanded (or custom lowered) into a
  // less optimal sequence of dag nodes.
  if (!DCI.isBeforeLegalize() && DCI.isBeforeLegalizeOps() &&
      N->getOpcode() == ISD::VECTOR_SHUFFLE &&
      N->getOperand(0).getOpcode() == ISD::BITCAST &&
      N->getOperand(1).isUndef() && N->getOperand(0).hasOneUse()) {
    SDValue N0 = N->getOperand(0);
    SDValue N1 = N->getOperand(1);

    SDValue BC0 = N0.getOperand(0);
    EVT SVT = BC0.getValueType();
    unsigned Opcode = BC0.getOpcode();
    unsigned NumElts = VT.getVectorNumElements();

    if (BC0.hasOneUse() && SVT.isVector() &&
        SVT.getVectorNumElements() * 2 == NumElts &&
        TLI.isOperationLegal(Opcode, VT)) {
      bool CanFold = false;
      switch (Opcode) {
      default : break;
      case ISD::ADD:
      case ISD::SUB:
      case ISD::MUL:
        // isOperationLegal lies for integer ops on floating point types.
        CanFold = VT.isInteger();
        break;
      case ISD::FADD:
      case ISD::FSUB:
      case ISD::FMUL:
        // isOperationLegal lies for floating point ops on integer types.
        CanFold = VT.isFloatingPoint();
        break;
      }

      unsigned SVTNumElts = SVT.getVectorNumElements();
      ShuffleVectorSDNode *SVOp = cast<ShuffleVectorSDNode>(N);
      for (unsigned i = 0, e = SVTNumElts; i != e && CanFold; ++i)
        CanFold = SVOp->getMaskElt(i) == (int)(i * 2);
      for (unsigned i = SVTNumElts, e = NumElts; i != e && CanFold; ++i)
        CanFold = SVOp->getMaskElt(i) < 0;

      if (CanFold) {
        SDValue BC00 = DAG.getBitcast(VT, BC0.getOperand(0));
        SDValue BC01 = DAG.getBitcast(VT, BC0.getOperand(1));
        SDValue NewBinOp = DAG.getNode(BC0.getOpcode(), dl, VT, BC00, BC01);
        return DAG.getVectorShuffle(VT, dl, NewBinOp, N1, SVOp->getMask());
      }
    }
  }

  // Combine a vector_shuffle that is equal to build_vector load1, load2, load3,
  // load4, <0, 1, 2, 3> into a 128-bit load if the load addresses are
  // consecutive, non-overlapping, and in the right order.
  SmallVector<SDValue, 16> Elts;
  for (unsigned i = 0, e = VT.getVectorNumElements(); i != e; ++i) {
    if (SDValue Elt = getShuffleScalarElt(N, i, DAG, 0)) {
      Elts.push_back(Elt);
      continue;
    }
    Elts.clear();
    break;
  }

  if (Elts.size() == VT.getVectorNumElements())
    if (SDValue LD =
            EltsFromConsecutiveLoads(VT, Elts, dl, DAG, Subtarget, true))
      return LD;

  // For AVX2, we sometimes want to combine
  // (vector_shuffle <mask> (concat_vectors t1, undef)
  //                        (concat_vectors t2, undef))
  // Into:
  // (vector_shuffle <mask> (concat_vectors t1, t2), undef)
  // Since the latter can be efficiently lowered with VPERMD/VPERMQ
  if (SDValue ShufConcat = combineShuffleOfConcatUndef(N, DAG, Subtarget))
    return ShufConcat;

  if (isTargetShuffle(N->getOpcode())) {
    SDValue Op(N, 0);
    if (SDValue Shuffle = combineTargetShuffle(Op, DAG, DCI, Subtarget))
      return Shuffle;

    // Try recursively combining arbitrary sequences of x86 shuffle
    // instructions into higher-order shuffles. We do this after combining
    // specific PSHUF instruction sequences into their minimal form so that we
    // can evaluate how many specialized shuffle instructions are involved in
    // a particular chain.
    if (SDValue Res = combineX86ShufflesRecursively(
            {Op}, 0, Op, {0}, {}, /*Depth*/ 1,
            /*HasVarMask*/ false, DAG, DCI, Subtarget)) {
      DCI.CombineTo(N, Res);
      return SDValue();
    }
  }

  return SDValue();
}

/// Check if a vector extract from a target-specific shuffle of a load can be
/// folded into a single element load.
/// Similar handling for VECTOR_SHUFFLE is performed by DAGCombiner, but
/// shuffles have been custom lowered so we need to handle those here.
static SDValue XFormVExtractWithShuffleIntoLoad(SDNode *N, SelectionDAG &DAG,
                                         TargetLowering::DAGCombinerInfo &DCI) {
  if (DCI.isBeforeLegalizeOps())
    return SDValue();

  SDValue InVec = N->getOperand(0);
  SDValue EltNo = N->getOperand(1);
  EVT EltVT = N->getValueType(0);

  if (!isa<ConstantSDNode>(EltNo))
    return SDValue();

  EVT OriginalVT = InVec.getValueType();

  // Peek through bitcasts, don't duplicate a load with other uses.
  InVec = peekThroughOneUseBitcasts(InVec);

  EVT CurrentVT = InVec.getValueType();
  if (!CurrentVT.isVector() ||
      CurrentVT.getVectorNumElements() != OriginalVT.getVectorNumElements())
    return SDValue();

  if (!isTargetShuffle(InVec.getOpcode()))
    return SDValue();

  // Don't duplicate a load with other uses.
  if (!InVec.hasOneUse())
    return SDValue();

  SmallVector<int, 16> ShuffleMask;
  SmallVector<SDValue, 2> ShuffleOps;
  bool UnaryShuffle;
  if (!getTargetShuffleMask(InVec.getNode(), CurrentVT.getSimpleVT(), true,
                            ShuffleOps, ShuffleMask, UnaryShuffle))
    return SDValue();

  // Select the input vector, guarding against out of range extract vector.
  unsigned NumElems = CurrentVT.getVectorNumElements();
  int Elt = cast<ConstantSDNode>(EltNo)->getZExtValue();
  int Idx = (Elt > (int)NumElems) ? SM_SentinelUndef : ShuffleMask[Elt];

  if (Idx == SM_SentinelZero)
    return EltVT.isInteger() ? DAG.getConstant(0, SDLoc(N), EltVT)
                             : DAG.getConstantFP(+0.0, SDLoc(N), EltVT);
  if (Idx == SM_SentinelUndef)
    return DAG.getUNDEF(EltVT);

  assert(0 <= Idx && Idx < (int)(2 * NumElems) && "Shuffle index out of range");
  SDValue LdNode = (Idx < (int)NumElems) ? ShuffleOps[0]
                                         : ShuffleOps[1];

  // If inputs to shuffle are the same for both ops, then allow 2 uses
  unsigned AllowedUses =
      (ShuffleOps.size() > 1 && ShuffleOps[0] == ShuffleOps[1]) ? 2 : 1;

  if (LdNode.getOpcode() == ISD::BITCAST) {
    // Don't duplicate a load with other uses.
    if (!LdNode.getNode()->hasNUsesOfValue(AllowedUses, 0))
      return SDValue();

    AllowedUses = 1; // only allow 1 load use if we have a bitcast
    LdNode = LdNode.getOperand(0);
  }

  if (!ISD::isNormalLoad(LdNode.getNode()))
    return SDValue();

  LoadSDNode *LN0 = cast<LoadSDNode>(LdNode);

  if (!LN0 ||!LN0->hasNUsesOfValue(AllowedUses, 0) || LN0->isVolatile())
    return SDValue();

  // If there's a bitcast before the shuffle, check if the load type and
  // alignment is valid.
  unsigned Align = LN0->getAlignment();
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  unsigned NewAlign = DAG.getDataLayout().getABITypeAlignment(
      EltVT.getTypeForEVT(*DAG.getContext()));

  if (NewAlign > Align || !TLI.isOperationLegalOrCustom(ISD::LOAD, EltVT))
    return SDValue();

  // All checks match so transform back to vector_shuffle so that DAG combiner
  // can finish the job
  SDLoc dl(N);

  // Create shuffle node taking into account the case that its a unary shuffle
  SDValue Shuffle = (UnaryShuffle) ? DAG.getUNDEF(CurrentVT) : ShuffleOps[1];
  Shuffle = DAG.getVectorShuffle(CurrentVT, dl, ShuffleOps[0], Shuffle,
                                 ShuffleMask);
  Shuffle = DAG.getBitcast(OriginalVT, Shuffle);
  return DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, N->getValueType(0), Shuffle,
                     EltNo);
}

// Try to match patterns such as
// (i16 bitcast (v16i1 x))
// ->
// (i16 movmsk (16i8 sext (v16i1 x)))
// before the illegal vector is scalarized on subtargets that don't have legal
// vxi1 types.
static SDValue combineBitcastvxi1(SelectionDAG &DAG, SDValue BitCast,
                                  const X86Subtarget &Subtarget) {
  EVT VT = BitCast.getValueType();
  SDValue N0 = BitCast.getOperand(0);
  EVT VecVT = N0->getValueType(0);

  if (!VT.isScalarInteger() || !VecVT.isSimple())
    return SDValue();

  // With AVX512 vxi1 types are legal and we prefer using k-regs.
  // MOVMSK is supported in SSE2 or later.
  if (Subtarget.hasAVX512() || !Subtarget.hasSSE2())
    return SDValue();

  // There are MOVMSK flavors for types v16i8, v32i8, v4f32, v8f32, v4f64 and
  // v8f64. So all legal 128-bit and 256-bit vectors are covered except for
  // v8i16 and v16i16.
  // For these two cases, we can shuffle the upper element bytes to a
  // consecutive sequence at the start of the vector and treat the results as
  // v16i8 or v32i8, and for v16i8 this is the preferable solution. However,
  // for v16i16 this is not the case, because the shuffle is expensive, so we
  // avoid sign-extending to this type entirely.
  // For example, t0 := (v8i16 sext(v8i1 x)) needs to be shuffled as:
  // (v16i8 shuffle <0,2,4,6,8,10,12,14,u,u,...,u> (v16i8 bitcast t0), undef)
  MVT SExtVT;
  MVT FPCastVT = MVT::INVALID_SIMPLE_VALUE_TYPE;
  switch (VecVT.getSimpleVT().SimpleTy) {
  default:
    return SDValue();
  case MVT::v2i1:
    SExtVT = MVT::v2i64;
    FPCastVT = MVT::v2f64;
    break;
  case MVT::v4i1:
    SExtVT = MVT::v4i32;
    FPCastVT = MVT::v4f32;
    // For cases such as (i4 bitcast (v4i1 setcc v4i64 v1, v2))
    // sign-extend to a 256-bit operation to avoid truncation.
    if (N0->getOpcode() == ISD::SETCC && Subtarget.hasAVX() &&
        N0->getOperand(0)->getValueType(0).is256BitVector()) {
      SExtVT = MVT::v4i64;
      FPCastVT = MVT::v4f64;
    }
    break;
  case MVT::v8i1:
    SExtVT = MVT::v8i16;
    // For cases such as (i8 bitcast (v8i1 setcc v8i32 v1, v2)),
    // sign-extend to a 256-bit operation to match the compare.
    // If the setcc operand is 128-bit, prefer sign-extending to 128-bit over
    // 256-bit because the shuffle is cheaper than sign extending the result of
    // the compare.
    if (N0->getOpcode() == ISD::SETCC && Subtarget.hasAVX() &&
        (N0->getOperand(0)->getValueType(0).is256BitVector() ||
         N0->getOperand(0)->getValueType(0).is512BitVector())) {
      SExtVT = MVT::v8i32;
      FPCastVT = MVT::v8f32;
    }
    break;
  case MVT::v16i1:
    SExtVT = MVT::v16i8;
    // For the case (i16 bitcast (v16i1 setcc v16i16 v1, v2)),
    // it is not profitable to sign-extend to 256-bit because this will
    // require an extra cross-lane shuffle which is more expensive than
    // truncating the result of the compare to 128-bits.
    break;
  case MVT::v32i1:
    SExtVT = MVT::v32i8;
    break;
  };

  SDLoc DL(BitCast);
  SDValue V = DAG.getSExtOrTrunc(N0, DL, SExtVT);

  if (SExtVT == MVT::v32i8 && !Subtarget.hasInt256()) {
    // Handle pre-AVX2 cases by splitting to two v16i1's.
    const TargetLowering &TLI = DAG.getTargetLoweringInfo();
    MVT ShiftTy = TLI.getScalarShiftAmountTy(DAG.getDataLayout(), MVT::i32);
    SDValue Lo = extract128BitVector(V, 0, DAG, DL);
    SDValue Hi = extract128BitVector(V, 16, DAG, DL);
    Lo = DAG.getNode(X86ISD::MOVMSK, DL, MVT::i32, Lo);
    Hi = DAG.getNode(X86ISD::MOVMSK, DL, MVT::i32, Hi);
    Hi = DAG.getNode(ISD::SHL, DL, MVT::i32, Hi,
                     DAG.getConstant(16, DL, ShiftTy));
    V = DAG.getNode(ISD::OR, DL, MVT::i32, Lo, Hi);
    return DAG.getZExtOrTrunc(V, DL, VT);
  }

  if (SExtVT == MVT::v8i16) {
    assert(16 == DAG.ComputeNumSignBits(V) && "Expected all/none bit vector");
    V = DAG.getNode(X86ISD::PACKSS, DL, MVT::v16i8, V,
                    DAG.getUNDEF(MVT::v8i16));
  } else
    assert(SExtVT.getScalarType() != MVT::i16 &&
           "Vectors of i16 must be packed");
  if (FPCastVT != MVT::INVALID_SIMPLE_VALUE_TYPE)
    V = DAG.getBitcast(FPCastVT, V);
  V = DAG.getNode(X86ISD::MOVMSK, DL, MVT::i32, V);
  return DAG.getZExtOrTrunc(V, DL, VT);
}

static SDValue combineBitcast(SDNode *N, SelectionDAG &DAG,
                              TargetLowering::DAGCombinerInfo &DCI,
                              const X86Subtarget &Subtarget) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  EVT SrcVT = N0.getValueType();

  // Try to match patterns such as
  // (i16 bitcast (v16i1 x))
  // ->
  // (i16 movmsk (16i8 sext (v16i1 x)))
  // before the setcc result is scalarized on subtargets that don't have legal
  // vxi1 types.
  if (DCI.isBeforeLegalize())
    if (SDValue V = combineBitcastvxi1(DAG, SDValue(N, 0), Subtarget))
      return V;
  // Since MMX types are special and don't usually play with other vector types,
  // it's better to handle them early to be sure we emit efficient code by
  // avoiding store-load conversions.

  // Detect bitcasts between i32 to x86mmx low word.
  if (VT == MVT::x86mmx && N0.getOpcode() == ISD::BUILD_VECTOR &&
      SrcVT == MVT::v2i32 && isNullConstant(N0.getOperand(1))) {
    SDValue N00 = N0->getOperand(0);
    if (N00.getValueType() == MVT::i32)
      return DAG.getNode(X86ISD::MMX_MOVW2D, SDLoc(N00), VT, N00);
  }

  // Detect bitcasts between element or subvector extraction to x86mmx.
  if (VT == MVT::x86mmx &&
      (N0.getOpcode() == ISD::EXTRACT_VECTOR_ELT ||
       N0.getOpcode() == ISD::EXTRACT_SUBVECTOR) &&
      isNullConstant(N0.getOperand(1))) {
    SDValue N00 = N0->getOperand(0);
    if (N00.getValueType().is128BitVector())
      return DAG.getNode(X86ISD::MOVDQ2Q, SDLoc(N00), VT,
                         DAG.getBitcast(MVT::v2i64, N00));
  }

  // Detect bitcasts from FP_TO_SINT to x86mmx.
  if (VT == MVT::x86mmx && SrcVT == MVT::v2i32 &&
      N0.getOpcode() == ISD::FP_TO_SINT) {
    SDLoc DL(N0);
    SDValue Res = DAG.getNode(ISD::CONCAT_VECTORS, DL, MVT::v4i32, N0,
                              DAG.getUNDEF(MVT::v2i32));
    return DAG.getNode(X86ISD::MOVDQ2Q, DL, VT,
                       DAG.getBitcast(MVT::v2i64, Res));
  }

  // Convert a bitcasted integer logic operation that has one bitcasted
  // floating-point operand into a floating-point logic operation. This may
  // create a load of a constant, but that is cheaper than materializing the
  // constant in an integer register and transferring it to an SSE register or
  // transferring the SSE operand to integer register and back.
  unsigned FPOpcode;
  switch (N0.getOpcode()) {
    case ISD::AND: FPOpcode = X86ISD::FAND; break;
    case ISD::OR:  FPOpcode = X86ISD::FOR;  break;
    case ISD::XOR: FPOpcode = X86ISD::FXOR; break;
    default: return SDValue();
  }

  if (!((Subtarget.hasSSE1() && VT == MVT::f32) ||
        (Subtarget.hasSSE2() && VT == MVT::f64)))
    return SDValue();

  SDValue LogicOp0 = N0.getOperand(0);
  SDValue LogicOp1 = N0.getOperand(1);
  SDLoc DL0(N0);

  // bitcast(logic(bitcast(X), Y)) --> logic'(X, bitcast(Y))
  if (N0.hasOneUse() && LogicOp0.getOpcode() == ISD::BITCAST &&
      LogicOp0.hasOneUse() && LogicOp0.getOperand(0).getValueType() == VT &&
      !isa<ConstantSDNode>(LogicOp0.getOperand(0))) {
    SDValue CastedOp1 = DAG.getBitcast(VT, LogicOp1);
    return DAG.getNode(FPOpcode, DL0, VT, LogicOp0.getOperand(0), CastedOp1);
  }
  // bitcast(logic(X, bitcast(Y))) --> logic'(bitcast(X), Y)
  if (N0.hasOneUse() && LogicOp1.getOpcode() == ISD::BITCAST &&
      LogicOp1.hasOneUse() && LogicOp1.getOperand(0).getValueType() == VT &&
      !isa<ConstantSDNode>(LogicOp1.getOperand(0))) {
    SDValue CastedOp0 = DAG.getBitcast(VT, LogicOp0);
    return DAG.getNode(FPOpcode, DL0, VT, LogicOp1.getOperand(0), CastedOp0);
  }

  return SDValue();
}

// Match a binop + shuffle pyramid that represents a horizontal reduction over
// the elements of a vector.
// Returns the vector that is being reduced on, or SDValue() if a reduction
// was not matched.
static SDValue matchBinOpReduction(SDNode *Extract, ISD::NodeType BinOp) {
  // The pattern must end in an extract from index 0.
  if ((Extract->getOpcode() != ISD::EXTRACT_VECTOR_ELT) ||
      !isNullConstant(Extract->getOperand(1)))
    return SDValue();

  unsigned Stages =
      Log2_32(Extract->getOperand(0).getValueType().getVectorNumElements());

  SDValue Op = Extract->getOperand(0);
  // At each stage, we're looking for something that looks like:
  // %s = shufflevector <8 x i32> %op, <8 x i32> undef,
  //                    <8 x i32> <i32 2, i32 3, i32 undef, i32 undef,
  //                               i32 undef, i32 undef, i32 undef, i32 undef>
  // %a = binop <8 x i32> %op, %s
  // Where the mask changes according to the stage. E.g. for a 3-stage pyramid,
  // we expect something like:
  // <4,5,6,7,u,u,u,u>
  // <2,3,u,u,u,u,u,u>
  // <1,u,u,u,u,u,u,u>
  for (unsigned i = 0; i < Stages; ++i) {
    if (Op.getOpcode() != BinOp)
      return SDValue();

    ShuffleVectorSDNode *Shuffle =
        dyn_cast<ShuffleVectorSDNode>(Op.getOperand(0).getNode());
    if (Shuffle) {
      Op = Op.getOperand(1);
    } else {
      Shuffle = dyn_cast<ShuffleVectorSDNode>(Op.getOperand(1).getNode());
      Op = Op.getOperand(0);
    }

    // The first operand of the shuffle should be the same as the other operand
    // of the add.
    if (!Shuffle || (Shuffle->getOperand(0) != Op))
      return SDValue();

    // Verify the shuffle has the expected (at this stage of the pyramid) mask.
    for (int Index = 0, MaskEnd = 1 << i; Index < MaskEnd; ++Index)
      if (Shuffle->getMaskElt(Index) != MaskEnd + Index)
        return SDValue();
  }

  return Op;
}

// Given a select, detect the following pattern:
// 1:    %2 = zext <N x i8> %0 to <N x i32>
// 2:    %3 = zext <N x i8> %1 to <N x i32>
// 3:    %4 = sub nsw <N x i32> %2, %3
// 4:    %5 = icmp sgt <N x i32> %4, [0 x N] or [-1 x N]
// 5:    %6 = sub nsw <N x i32> zeroinitializer, %4
// 6:    %7 = select <N x i1> %5, <N x i32> %4, <N x i32> %6
// This is useful as it is the input into a SAD pattern.
static bool detectZextAbsDiff(const SDValue &Select, SDValue &Op0,
                              SDValue &Op1) {
  // Check the condition of the select instruction is greater-than.
  SDValue SetCC = Select->getOperand(0);
  if (SetCC.getOpcode() != ISD::SETCC)
    return false;
  ISD::CondCode CC = cast<CondCodeSDNode>(SetCC.getOperand(2))->get();
  if (CC != ISD::SETGT && CC != ISD::SETLT)
    return false;

  SDValue SelectOp1 = Select->getOperand(1);
  SDValue SelectOp2 = Select->getOperand(2);

  // The following instructions assume SelectOp1 is the subtraction operand
  // and SelectOp2 is the negation operand.
  // In the case of SETLT this is the other way around.
  if (CC == ISD::SETLT)
    std::swap(SelectOp1, SelectOp2);

  // The second operand of the select should be the negation of the first
  // operand, which is implemented as 0 - SelectOp1.
  if (!(SelectOp2.getOpcode() == ISD::SUB &&
        ISD::isBuildVectorAllZeros(SelectOp2.getOperand(0).getNode()) &&
        SelectOp2.getOperand(1) == SelectOp1))
    return false;

  // The first operand of SetCC is the first operand of the select, which is the
  // difference between the two input vectors.
  if (SetCC.getOperand(0) != SelectOp1)
    return false;

  // In SetLT case, The second operand of the comparison can be either 1 or 0.
  APInt SplatVal;
  if ((CC == ISD::SETLT) &&
      !((ISD::isConstantSplatVector(SetCC.getOperand(1).getNode(), SplatVal) &&
         SplatVal.isOneValue()) ||
        (ISD::isBuildVectorAllZeros(SetCC.getOperand(1).getNode()))))
    return false;

  // In SetGT case, The second operand of the comparison can be either -1 or 0.
  if ((CC == ISD::SETGT) &&
      !(ISD::isBuildVectorAllZeros(SetCC.getOperand(1).getNode()) ||
        ISD::isBuildVectorAllOnes(SetCC.getOperand(1).getNode())))
    return false;

  // The first operand of the select is the difference between the two input
  // vectors.
  if (SelectOp1.getOpcode() != ISD::SUB)
    return false;

  Op0 = SelectOp1.getOperand(0);
  Op1 = SelectOp1.getOperand(1);

  // Check if the operands of the sub are zero-extended from vectors of i8.
  if (Op0.getOpcode() != ISD::ZERO_EXTEND ||
      Op0.getOperand(0).getValueType().getVectorElementType() != MVT::i8 ||
      Op1.getOpcode() != ISD::ZERO_EXTEND ||
      Op1.getOperand(0).getValueType().getVectorElementType() != MVT::i8)
    return false;

  return true;
}

// Given two zexts of <k x i8> to <k x i32>, create a PSADBW of the inputs
// to these zexts.
static SDValue createPSADBW(SelectionDAG &DAG, const SDValue &Zext0,
                            const SDValue &Zext1, const SDLoc &DL) {

  // Find the appropriate width for the PSADBW.
  EVT InVT = Zext0.getOperand(0).getValueType();
  unsigned RegSize = std::max(128u, InVT.getSizeInBits());

  // "Zero-extend" the i8 vectors. This is not a per-element zext, rather we
  // fill in the missing vector elements with 0.
  unsigned NumConcat = RegSize / InVT.getSizeInBits();
  SmallVector<SDValue, 16> Ops(NumConcat, DAG.getConstant(0, DL, InVT));
  Ops[0] = Zext0.getOperand(0);
  MVT ExtendedVT = MVT::getVectorVT(MVT::i8, RegSize / 8);
  SDValue SadOp0 = DAG.getNode(ISD::CONCAT_VECTORS, DL, ExtendedVT, Ops);
  Ops[0] = Zext1.getOperand(0);
  SDValue SadOp1 = DAG.getNode(ISD::CONCAT_VECTORS, DL, ExtendedVT, Ops);

  // Actually build the SAD
  MVT SadVT = MVT::getVectorVT(MVT::i64, RegSize / 64);
  return DAG.getNode(X86ISD::PSADBW, DL, SadVT, SadOp0, SadOp1);
}

// Attempt to replace an all_of/any_of style horizontal reduction with a MOVMSK.
static SDValue combineHorizontalPredicateResult(SDNode *Extract,
                                                SelectionDAG &DAG,
                                                const X86Subtarget &Subtarget) {
  // Bail without SSE2 or with AVX512VL (which uses predicate registers).
  if (!Subtarget.hasSSE2() || Subtarget.hasVLX())
    return SDValue();

  EVT ExtractVT = Extract->getValueType(0);
  unsigned BitWidth = ExtractVT.getSizeInBits();
  if (ExtractVT != MVT::i64 && ExtractVT != MVT::i32 && ExtractVT != MVT::i16 &&
      ExtractVT != MVT::i8)
    return SDValue();

  // Check for OR(any_of) and AND(all_of) horizontal reduction patterns.
  for (ISD::NodeType Op : {ISD::OR, ISD::AND}) {
    SDValue Match = matchBinOpReduction(Extract, Op);
    if (!Match)
      continue;

    // EXTRACT_VECTOR_ELT can require implicit extension of the vector element
    // which we can't support here for now.
    if (Match.getScalarValueSizeInBits() != BitWidth)
      continue;

    // We require AVX2 for PMOVMSKB for v16i16/v32i8;
    unsigned MatchSizeInBits = Match.getValueSizeInBits();
    if (!(MatchSizeInBits == 128 ||
          (MatchSizeInBits == 256 &&
           ((Subtarget.hasAVX() && BitWidth >= 32) || Subtarget.hasAVX2()))))
      return SDValue();

    // Don't bother performing this for 2-element vectors.
    if (Match.getValueType().getVectorNumElements() <= 2)
      return SDValue();

    // Check that we are extracting a reduction of all sign bits.
    if (DAG.ComputeNumSignBits(Match) != BitWidth)
      return SDValue();

    // For 32/64 bit comparisons use MOVMSKPS/MOVMSKPD, else PMOVMSKB.
    MVT MaskVT;
    if (64 == BitWidth || 32 == BitWidth)
      MaskVT = MVT::getVectorVT(MVT::getFloatingPointVT(BitWidth),
                                MatchSizeInBits / BitWidth);
    else
      MaskVT = MVT::getVectorVT(MVT::i8, MatchSizeInBits / 8);

    APInt CompareBits;
    ISD::CondCode CondCode;
    if (Op == ISD::OR) {
      // any_of -> MOVMSK != 0
      CompareBits = APInt::getNullValue(32);
      CondCode = ISD::CondCode::SETNE;
    } else {
      // all_of -> MOVMSK == ((1 << NumElts) - 1)
      CompareBits = APInt::getLowBitsSet(32, MaskVT.getVectorNumElements());
      CondCode = ISD::CondCode::SETEQ;
    }

    // Perform the select as i32/i64 and then truncate to avoid partial register
    // stalls.
    unsigned ResWidth = std::max(BitWidth, 32u);
    EVT ResVT = EVT::getIntegerVT(*DAG.getContext(), ResWidth);
    SDLoc DL(Extract);
    SDValue Zero = DAG.getConstant(0, DL, ResVT);
    SDValue Ones = DAG.getAllOnesConstant(DL, ResVT);
    SDValue Res = DAG.getBitcast(MaskVT, Match);
    Res = DAG.getNode(X86ISD::MOVMSK, DL, MVT::i32, Res);
    Res = DAG.getSelectCC(DL, Res, DAG.getConstant(CompareBits, DL, MVT::i32),
                          Ones, Zero, CondCode);
    return DAG.getSExtOrTrunc(Res, DL, ExtractVT);
  }

  return SDValue();
}

static SDValue combineBasicSADPattern(SDNode *Extract, SelectionDAG &DAG,
                                      const X86Subtarget &Subtarget) {
  // PSADBW is only supported on SSE2 and up.
  if (!Subtarget.hasSSE2())
    return SDValue();

  // Verify the type we're extracting from is any integer type above i16.
  EVT VT = Extract->getOperand(0).getValueType();
  if (!VT.isSimple() || !(VT.getVectorElementType().getSizeInBits() > 16))
    return SDValue();

  unsigned RegSize = 128;
  if (Subtarget.hasBWI())
    RegSize = 512;
  else if (Subtarget.hasAVX2())
    RegSize = 256;

  // We handle upto v16i* for SSE2 / v32i* for AVX2 / v64i* for AVX512.
  // TODO: We should be able to handle larger vectors by splitting them before
  // feeding them into several SADs, and then reducing over those.
  if (RegSize / VT.getVectorNumElements() < 8)
    return SDValue();

  // Match shuffle + add pyramid.
  SDValue Root = matchBinOpReduction(Extract, ISD::ADD);

  // The operand is expected to be zero extended from i8
  // (verified in detectZextAbsDiff).
  // In order to convert to i64 and above, additional any/zero/sign
  // extend is expected.
  // The zero extend from 32 bit has no mathematical effect on the result.
  // Also the sign extend is basically zero extend
  // (extends the sign bit which is zero).
  // So it is correct to skip the sign/zero extend instruction.
  if (Root && (Root.getOpcode() == ISD::SIGN_EXTEND ||
    Root.getOpcode() == ISD::ZERO_EXTEND ||
    Root.getOpcode() == ISD::ANY_EXTEND))
    Root = Root.getOperand(0);

  // If there was a match, we want Root to be a select that is the root of an
  // abs-diff pattern.
  if (!Root || (Root.getOpcode() != ISD::VSELECT))
    return SDValue();

  // Check whether we have an abs-diff pattern feeding into the select.
  SDValue Zext0, Zext1;
  if (!detectZextAbsDiff(Root, Zext0, Zext1))
    return SDValue();

  // Create the SAD instruction.
  SDLoc DL(Extract);
  SDValue SAD = createPSADBW(DAG, Zext0, Zext1, DL);

  // If the original vector was wider than 8 elements, sum over the results
  // in the SAD vector.
  unsigned Stages = Log2_32(VT.getVectorNumElements());
  MVT SadVT = SAD.getSimpleValueType();
  if (Stages > 3) {
    unsigned SadElems = SadVT.getVectorNumElements();

    for(unsigned i = Stages - 3; i > 0; --i) {
      SmallVector<int, 16> Mask(SadElems, -1);
      for(unsigned j = 0, MaskEnd = 1 << (i - 1); j < MaskEnd; ++j)
        Mask[j] = MaskEnd + j;

      SDValue Shuffle =
          DAG.getVectorShuffle(SadVT, DL, SAD, DAG.getUNDEF(SadVT), Mask);
      SAD = DAG.getNode(ISD::ADD, DL, SadVT, SAD, Shuffle);
    }
  }

  MVT Type = Extract->getSimpleValueType(0);
  unsigned TypeSizeInBits = Type.getSizeInBits();
  // Return the lowest TypeSizeInBits bits.
  MVT ResVT = MVT::getVectorVT(Type, SadVT.getSizeInBits() / TypeSizeInBits);
  SAD = DAG.getBitcast(ResVT, SAD);
  return DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, Type, SAD,
                     Extract->getOperand(1));
}

// Attempt to peek through a target shuffle and extract the scalar from the
// source.
static SDValue combineExtractWithShuffle(SDNode *N, SelectionDAG &DAG,
                                         TargetLowering::DAGCombinerInfo &DCI,
                                         const X86Subtarget &Subtarget) {
  if (DCI.isBeforeLegalizeOps())
    return SDValue();

  SDValue Src = N->getOperand(0);
  SDValue Idx = N->getOperand(1);

  EVT VT = N->getValueType(0);
  EVT SrcVT = Src.getValueType();
  EVT SrcSVT = SrcVT.getVectorElementType();
  unsigned NumSrcElts = SrcVT.getVectorNumElements();

  // Don't attempt this for boolean mask vectors or unknown extraction indices.
  if (SrcSVT == MVT::i1 || !isa<ConstantSDNode>(Idx))
    return SDValue();

  // Resolve the target shuffle inputs and mask.
  SmallVector<int, 16> Mask;
  SmallVector<SDValue, 2> Ops;
  if (!resolveTargetShuffleInputs(peekThroughBitcasts(Src), Ops, Mask, DAG))
    return SDValue();

  // Attempt to narrow/widen the shuffle mask to the correct size.
  if (Mask.size() != NumSrcElts) {
    if ((NumSrcElts % Mask.size()) == 0) {
      SmallVector<int, 16> ScaledMask;
      int Scale = NumSrcElts / Mask.size();
      scaleShuffleMask<int>(Scale, Mask, ScaledMask);
      Mask = std::move(ScaledMask);
    } else if ((Mask.size() % NumSrcElts) == 0) {
      SmallVector<int, 16> WidenedMask;
      while (Mask.size() > NumSrcElts &&
             canWidenShuffleElements(Mask, WidenedMask))
        Mask = std::move(WidenedMask);
      // TODO - investigate support for wider shuffle masks with known upper
      // undef/zero elements for implicit zero-extension.
    }
  }

  // Check if narrowing/widening failed.
  if (Mask.size() != NumSrcElts)
    return SDValue();

  int SrcIdx = Mask[N->getConstantOperandVal(1)];
  SDLoc dl(N);

  // If the shuffle source element is undef/zero then we can just accept it.
  if (SrcIdx == SM_SentinelUndef)
    return DAG.getUNDEF(VT);

  if (SrcIdx == SM_SentinelZero)
    return VT.isFloatingPoint() ? DAG.getConstantFP(0.0, dl, VT)
                                : DAG.getConstant(0, dl, VT);

  SDValue SrcOp = Ops[SrcIdx / Mask.size()];
  SrcOp = DAG.getBitcast(SrcVT, SrcOp);
  SrcIdx = SrcIdx % Mask.size();

  // We can only extract other elements from 128-bit vectors and in certain
  // circumstances, depending on SSE-level.
  // TODO: Investigate using extract_subvector for larger vectors.
  // TODO: Investigate float/double extraction if it will be just stored.
  if ((SrcVT == MVT::v4i32 || SrcVT == MVT::v2i64) &&
      ((SrcIdx == 0 && Subtarget.hasSSE2()) || Subtarget.hasSSE41())) {
    assert(SrcSVT == VT && "Unexpected extraction type");
    return DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, SrcSVT, SrcOp,
                       DAG.getIntPtrConstant(SrcIdx, dl));
  }

  if ((SrcVT == MVT::v8i16 && Subtarget.hasSSE2()) ||
      (SrcVT == MVT::v16i8 && Subtarget.hasSSE41())) {
    assert(VT.getSizeInBits() >= SrcSVT.getSizeInBits() &&
           "Unexpected extraction type");
    unsigned OpCode = (SrcVT == MVT::v8i16 ? X86ISD::PEXTRW : X86ISD::PEXTRB);
    SDValue ExtOp = DAG.getNode(OpCode, dl, MVT::i32, SrcOp,
                                DAG.getIntPtrConstant(SrcIdx, dl));
    return DAG.getZExtOrTrunc(ExtOp, dl, VT);
  }

  return SDValue();
}

/// Detect vector gather/scatter index generation and convert it from being a
/// bunch of shuffles and extracts into a somewhat faster sequence.
/// For i686, the best sequence is apparently storing the value and loading
/// scalars back, while for x64 we should use 64-bit extracts and shifts.
static SDValue combineExtractVectorElt(SDNode *N, SelectionDAG &DAG,
                                       TargetLowering::DAGCombinerInfo &DCI,
                                       const X86Subtarget &Subtarget) {
  if (SDValue NewOp = combineExtractWithShuffle(N, DAG, DCI, Subtarget))
    return NewOp;

  // TODO - Remove this once we can handle the implicit zero-extension of
  // X86ISD::PEXTRW/X86ISD::PEXTRB in:
  // XFormVExtractWithShuffleIntoLoad, combineHorizontalPredicateResult and
  // combineBasicSADPattern.
  if (N->getOpcode() != ISD::EXTRACT_VECTOR_ELT)
    return SDValue();

  if (SDValue NewOp = XFormVExtractWithShuffleIntoLoad(N, DAG, DCI))
    return NewOp;

  SDValue InputVector = N->getOperand(0);
  SDValue EltIdx = N->getOperand(1);

  EVT SrcVT = InputVector.getValueType();
  EVT VT = N->getValueType(0);
  SDLoc dl(InputVector);

  // Detect mmx extraction of all bits as a i64. It works better as a bitcast.
  if (InputVector.getOpcode() == ISD::BITCAST && InputVector.hasOneUse() &&
      VT == MVT::i64 && SrcVT == MVT::v1i64 && isNullConstant(EltIdx)) {
    SDValue MMXSrc = InputVector.getOperand(0);

    // The bitcast source is a direct mmx result.
    if (MMXSrc.getValueType() == MVT::x86mmx)
      return DAG.getBitcast(VT, InputVector);
  }

  // Detect mmx to i32 conversion through a v2i32 elt extract.
  if (InputVector.getOpcode() == ISD::BITCAST && InputVector.hasOneUse() &&
      VT == MVT::i32 && SrcVT == MVT::v2i32 && isNullConstant(EltIdx)) {
    SDValue MMXSrc = InputVector.getOperand(0);

    // The bitcast source is a direct mmx result.
    if (MMXSrc.getValueType() == MVT::x86mmx)
      return DAG.getNode(X86ISD::MMX_MOVD2W, dl, MVT::i32, MMXSrc);
  }

  if (VT == MVT::i1 && InputVector.getOpcode() == ISD::BITCAST &&
      isa<ConstantSDNode>(EltIdx) &&
      isa<ConstantSDNode>(InputVector.getOperand(0))) {
    uint64_t ExtractedElt = N->getConstantOperandVal(1);
    uint64_t InputValue = InputVector.getConstantOperandVal(0);
    uint64_t Res = (InputValue >> ExtractedElt) & 1;
    return DAG.getConstant(Res, dl, MVT::i1);
  }

  // Check whether this extract is the root of a sum of absolute differences
  // pattern. This has to be done here because we really want it to happen
  // pre-legalization,
  if (SDValue SAD = combineBasicSADPattern(N, DAG, Subtarget))
    return SAD;

  // Attempt to replace an all_of/any_of horizontal reduction with a MOVMSK.
  if (SDValue Cmp = combineHorizontalPredicateResult(N, DAG, Subtarget))
    return Cmp;

  // Only operate on vectors of 4 elements, where the alternative shuffling
  // gets to be more expensive.
  if (SrcVT != MVT::v4i32)
    return SDValue();

  // Check whether every use of InputVector is an EXTRACT_VECTOR_ELT with a
  // single use which is a sign-extend or zero-extend, and all elements are
  // used.
  SmallVector<SDNode *, 4> Uses;
  unsigned ExtractedElements = 0;
  for (SDNode::use_iterator UI = InputVector.getNode()->use_begin(),
       UE = InputVector.getNode()->use_end(); UI != UE; ++UI) {
    if (UI.getUse().getResNo() != InputVector.getResNo())
      return SDValue();

    SDNode *Extract = *UI;
    if (Extract->getOpcode() != ISD::EXTRACT_VECTOR_ELT)
      return SDValue();

    if (Extract->getValueType(0) != MVT::i32)
      return SDValue();
    if (!Extract->hasOneUse())
      return SDValue();
    if (Extract->use_begin()->getOpcode() != ISD::SIGN_EXTEND &&
        Extract->use_begin()->getOpcode() != ISD::ZERO_EXTEND)
      return SDValue();
    if (!isa<ConstantSDNode>(Extract->getOperand(1)))
      return SDValue();

    // Record which element was extracted.
    ExtractedElements |= 1 << Extract->getConstantOperandVal(1);
    Uses.push_back(Extract);
  }

  // If not all the elements were used, this may not be worthwhile.
  if (ExtractedElements != 15)
    return SDValue();

  // Ok, we've now decided to do the transformation.
  // If 64-bit shifts are legal, use the extract-shift sequence,
  // otherwise bounce the vector off the cache.
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  SDValue Vals[4];

  if (TLI.isOperationLegal(ISD::SRA, MVT::i64)) {
    SDValue Cst = DAG.getBitcast(MVT::v2i64, InputVector);
    auto &DL = DAG.getDataLayout();
    EVT VecIdxTy = DAG.getTargetLoweringInfo().getVectorIdxTy(DL);
    SDValue BottomHalf = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, MVT::i64, Cst,
      DAG.getConstant(0, dl, VecIdxTy));
    SDValue TopHalf = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, MVT::i64, Cst,
      DAG.getConstant(1, dl, VecIdxTy));

    SDValue ShAmt = DAG.getConstant(
        32, dl, DAG.getTargetLoweringInfo().getShiftAmountTy(MVT::i64, DL));
    Vals[0] = DAG.getNode(ISD::TRUNCATE, dl, MVT::i32, BottomHalf);
    Vals[1] = DAG.getNode(ISD::TRUNCATE, dl, MVT::i32,
      DAG.getNode(ISD::SRA, dl, MVT::i64, BottomHalf, ShAmt));
    Vals[2] = DAG.getNode(ISD::TRUNCATE, dl, MVT::i32, TopHalf);
    Vals[3] = DAG.getNode(ISD::TRUNCATE, dl, MVT::i32,
      DAG.getNode(ISD::SRA, dl, MVT::i64, TopHalf, ShAmt));
  } else {
    // Store the value to a temporary stack slot.
    SDValue StackPtr = DAG.CreateStackTemporary(SrcVT);
    SDValue Ch = DAG.getStore(DAG.getEntryNode(), dl, InputVector, StackPtr,
                              MachinePointerInfo());

    EVT ElementType = SrcVT.getVectorElementType();
    unsigned EltSize = ElementType.getSizeInBits() / 8;

    // Replace each use (extract) with a load of the appropriate element.
    for (unsigned i = 0; i < 4; ++i) {
      uint64_t Offset = EltSize * i;
      auto PtrVT = TLI.getPointerTy(DAG.getDataLayout());
      SDValue OffsetVal = DAG.getConstant(Offset, dl, PtrVT);

      SDValue ScalarAddr =
          DAG.getNode(ISD::ADD, dl, PtrVT, StackPtr, OffsetVal);

      // Load the scalar.
      Vals[i] =
          DAG.getLoad(ElementType, dl, Ch, ScalarAddr, MachinePointerInfo());
    }
  }

  // Replace the extracts
  for (SmallVectorImpl<SDNode *>::iterator UI = Uses.begin(),
    UE = Uses.end(); UI != UE; ++UI) {
    SDNode *Extract = *UI;

    uint64_t IdxVal = Extract->getConstantOperandVal(1);
    DAG.ReplaceAllUsesOfValueWith(SDValue(Extract, 0), Vals[IdxVal]);
  }

  // The replacement was made in place; don't return anything.
  return SDValue();
}

/// If a vector select has an operand that is -1 or 0, try to simplify the
/// select to a bitwise logic operation.
/// TODO: Move to DAGCombiner, possibly using TargetLowering::hasAndNot()?
static SDValue
combineVSelectWithAllOnesOrZeros(SDNode *N, SelectionDAG &DAG,
                                 TargetLowering::DAGCombinerInfo &DCI,
                                 const X86Subtarget &Subtarget) {
  SDValue Cond = N->getOperand(0);
  SDValue LHS = N->getOperand(1);
  SDValue RHS = N->getOperand(2);
  EVT VT = LHS.getValueType();
  EVT CondVT = Cond.getValueType();
  SDLoc DL(N);
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();

  if (N->getOpcode() != ISD::VSELECT)
    return SDValue();

  assert(CondVT.isVector() && "Vector select expects a vector selector!");

  bool TValIsAllZeros = ISD::isBuildVectorAllZeros(LHS.getNode());
  // Check if the first operand is all zeros and Cond type is vXi1.
  // This situation only applies to avx512.
  if (TValIsAllZeros  && Subtarget.hasAVX512() && Cond.hasOneUse() &&
      CondVT.getVectorElementType() == MVT::i1) {
    // Invert the cond to not(cond) : xor(op,allones)=not(op)
    SDValue CondNew = DAG.getNode(ISD::XOR, DL, CondVT, Cond,
                                  DAG.getAllOnesConstant(DL, CondVT));
    // Vselect cond, op1, op2 = Vselect not(cond), op2, op1
    return DAG.getSelect(DL, VT, CondNew, RHS, LHS);
  }

  // To use the condition operand as a bitwise mask, it must have elements that
  // are the same size as the select elements. Ie, the condition operand must
  // have already been promoted from the IR select condition type <N x i1>.
  // Don't check if the types themselves are equal because that excludes
  // vector floating-point selects.
  if (CondVT.getScalarSizeInBits() != VT.getScalarSizeInBits())
    return SDValue();

  bool TValIsAllOnes = ISD::isBuildVectorAllOnes(LHS.getNode());
  bool FValIsAllZeros = ISD::isBuildVectorAllZeros(RHS.getNode());

  // Try to invert the condition if true value is not all 1s and false value is
  // not all 0s.
  if (!TValIsAllOnes && !FValIsAllZeros &&
      // Check if the selector will be produced by CMPP*/PCMP*.
      Cond.getOpcode() == ISD::SETCC &&
      // Check if SETCC has already been promoted.
      TLI.getSetCCResultType(DAG.getDataLayout(), *DAG.getContext(), VT) ==
          CondVT) {
    bool FValIsAllOnes = ISD::isBuildVectorAllOnes(RHS.getNode());

    if (TValIsAllZeros || FValIsAllOnes) {
      SDValue CC = Cond.getOperand(2);
      ISD::CondCode NewCC =
          ISD::getSetCCInverse(cast<CondCodeSDNode>(CC)->get(),
                               Cond.getOperand(0).getValueType().isInteger());
      Cond = DAG.getSetCC(DL, CondVT, Cond.getOperand(0), Cond.getOperand(1),
                          NewCC);
      std::swap(LHS, RHS);
      TValIsAllOnes = FValIsAllOnes;
      FValIsAllZeros = TValIsAllZeros;
    }
  }

  // Cond value must be 'sign splat' to be converted to a logical op.
  if (DAG.ComputeNumSignBits(Cond) != CondVT.getScalarSizeInBits())
    return SDValue();

  // vselect Cond, 111..., 000... -> Cond
  if (TValIsAllOnes && FValIsAllZeros)
    return DAG.getBitcast(VT, Cond);

  if (!DCI.isBeforeLegalize() && !TLI.isTypeLegal(CondVT))
    return SDValue();

  // vselect Cond, 111..., X -> or Cond, X
  if (TValIsAllOnes) {
    SDValue CastRHS = DAG.getBitcast(CondVT, RHS);
    SDValue Or = DAG.getNode(ISD::OR, DL, CondVT, Cond, CastRHS);
    return DAG.getBitcast(VT, Or);
  }

  // vselect Cond, X, 000... -> and Cond, X
  if (FValIsAllZeros) {
    SDValue CastLHS = DAG.getBitcast(CondVT, LHS);
    SDValue And = DAG.getNode(ISD::AND, DL, CondVT, Cond, CastLHS);
    return DAG.getBitcast(VT, And);
  }

  // vselect Cond, 000..., X -> andn Cond, X
  if (TValIsAllZeros) {
    MVT AndNVT = MVT::getVectorVT(MVT::i64, CondVT.getSizeInBits() / 64);
    SDValue CastCond = DAG.getBitcast(AndNVT, Cond);
    SDValue CastRHS = DAG.getBitcast(AndNVT, RHS);
    SDValue AndN = DAG.getNode(X86ISD::ANDNP, DL, AndNVT, CastCond, CastRHS);
    return DAG.getBitcast(VT, AndN);
  }

  return SDValue();
}

static SDValue combineSelectOfTwoConstants(SDNode *N, SelectionDAG &DAG) {
  SDValue Cond = N->getOperand(0);
  SDValue LHS = N->getOperand(1);
  SDValue RHS = N->getOperand(2);
  SDLoc DL(N);

  auto *TrueC = dyn_cast<ConstantSDNode>(LHS);
  auto *FalseC = dyn_cast<ConstantSDNode>(RHS);
  if (!TrueC || !FalseC)
    return SDValue();

  // Don't do this for crazy integer types.
  EVT VT = N->getValueType(0);
  if (!DAG.getTargetLoweringInfo().isTypeLegal(VT))
    return SDValue();

  // We're going to use the condition bit in math or logic ops. We could allow
  // this with a wider condition value (post-legalization it becomes an i8),
  // but if nothing is creating selects that late, it doesn't matter.
  if (Cond.getValueType() != MVT::i1)
    return SDValue();

  // A power-of-2 multiply is just a shift. LEA also cheaply handles multiply by
  // 3, 5, or 9 with i32/i64, so those get transformed too.
  // TODO: For constants that overflow or do not differ by power-of-2 or small
  // multiplier, convert to 'and' + 'add'.
  const APInt &TrueVal = TrueC->getAPIntValue();
  const APInt &FalseVal = FalseC->getAPIntValue();
  bool OV;
  APInt Diff = TrueVal.ssub_ov(FalseVal, OV);
  if (OV)
    return SDValue();

  APInt AbsDiff = Diff.abs();
  if (AbsDiff.isPowerOf2() ||
      ((VT == MVT::i32 || VT == MVT::i64) &&
       (AbsDiff == 3 || AbsDiff == 5 || AbsDiff == 9))) {

    // We need a positive multiplier constant for shift/LEA codegen. The 'not'
    // of the condition can usually be folded into a compare predicate, but even
    // without that, the sequence should be cheaper than a CMOV alternative.
    if (TrueVal.slt(FalseVal)) {
      Cond = DAG.getNOT(DL, Cond, MVT::i1);
      std::swap(TrueC, FalseC);
    }

    // select Cond, TC, FC --> (zext(Cond) * (TC - FC)) + FC
    SDValue R = DAG.getNode(ISD::ZERO_EXTEND, DL, VT, Cond);

    // Multiply condition by the difference if non-one.
    if (!AbsDiff.isOneValue())
      R = DAG.getNode(ISD::MUL, DL, VT, R, DAG.getConstant(AbsDiff, DL, VT));

    // Add the base if non-zero.
    if (!FalseC->isNullValue())
      R = DAG.getNode(ISD::ADD, DL, VT, R, SDValue(FalseC, 0));

    return R;
  }

  return SDValue();
}

// If this is a bitcasted op that can be represented as another type, push the
// the bitcast to the inputs. This allows more opportunities for pattern
// matching masked instructions. This is called when we know that the operation
// is used as one of the inputs of a vselect.
static bool combineBitcastForMaskedOp(SDValue OrigOp, SelectionDAG &DAG,
                                      TargetLowering::DAGCombinerInfo &DCI) {
  // Make sure we have a bitcast.
  if (OrigOp.getOpcode() != ISD::BITCAST)
    return false;

  SDValue Op = OrigOp.getOperand(0);

  // If the operation is used by anything other than the bitcast, we shouldn't
  // do this combine as that would replicate the operation.
  if (!Op.hasOneUse())
    return false;

  MVT VT = OrigOp.getSimpleValueType();
  MVT EltVT = VT.getVectorElementType();
  SDLoc DL(Op.getNode());

  auto BitcastAndCombineShuffle = [&](unsigned Opcode, SDValue Op0, SDValue Op1,
                                      SDValue Op2) {
    Op0 = DAG.getBitcast(VT, Op0);
    DCI.AddToWorklist(Op0.getNode());
    Op1 = DAG.getBitcast(VT, Op1);
    DCI.AddToWorklist(Op1.getNode());
    DCI.CombineTo(OrigOp.getNode(),
                  DAG.getNode(Opcode, DL, VT, Op0, Op1, Op2));
    return true;
  };

  unsigned Opcode = Op.getOpcode();
  switch (Opcode) {
  case X86ISD::SHUF128: {
    if (EltVT.getSizeInBits() != 32 && EltVT.getSizeInBits() != 64)
      return false;
    // Only change element size, not type.
    if (VT.isInteger() != Op.getSimpleValueType().isInteger())
      return false;
    return BitcastAndCombineShuffle(Opcode, Op.getOperand(0), Op.getOperand(1),
                                    Op.getOperand(2));
  }
  case X86ISD::SUBV_BROADCAST: {
    unsigned EltSize = EltVT.getSizeInBits();
    if (EltSize != 32 && EltSize != 64)
      return false;
    // Only change element size, not type.
    if (VT.isInteger() != Op.getSimpleValueType().isInteger())
      return false;
    SDValue Op0 = Op.getOperand(0);
    MVT Op0VT = MVT::getVectorVT(EltVT,
                            Op0.getSimpleValueType().getSizeInBits() / EltSize);
    Op0 = DAG.getBitcast(Op0VT, Op.getOperand(0));
    DCI.AddToWorklist(Op0.getNode());
    DCI.CombineTo(OrigOp.getNode(),
                  DAG.getNode(Opcode, DL, VT, Op0));
    return true;
  }
  }

  return false;
}

/// Do target-specific dag combines on SELECT and VSELECT nodes.
static SDValue combineSelect(SDNode *N, SelectionDAG &DAG,
                             TargetLowering::DAGCombinerInfo &DCI,
                             const X86Subtarget &Subtarget) {
  SDLoc DL(N);
  SDValue Cond = N->getOperand(0);
  // Get the LHS/RHS of the select.
  SDValue LHS = N->getOperand(1);
  SDValue RHS = N->getOperand(2);
  EVT VT = LHS.getValueType();
  EVT CondVT = Cond.getValueType();
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();

  // If we have SSE[12] support, try to form min/max nodes. SSE min/max
  // instructions match the semantics of the common C idiom x<y?x:y but not
  // x<=y?x:y, because of how they handle negative zero (which can be
  // ignored in unsafe-math mode).
  // We also try to create v2f32 min/max nodes, which we later widen to v4f32.
  if (Cond.getOpcode() == ISD::SETCC && VT.isFloatingPoint() &&
      VT != MVT::f80 && VT != MVT::f128 &&
      (TLI.isTypeLegal(VT) || VT == MVT::v2f32) &&
      (Subtarget.hasSSE2() ||
       (Subtarget.hasSSE1() && VT.getScalarType() == MVT::f32))) {
    ISD::CondCode CC = cast<CondCodeSDNode>(Cond.getOperand(2))->get();

    unsigned Opcode = 0;
    // Check for x CC y ? x : y.
    if (DAG.isEqualTo(LHS, Cond.getOperand(0)) &&
        DAG.isEqualTo(RHS, Cond.getOperand(1))) {
      switch (CC) {
      default: break;
      case ISD::SETULT:
        // Converting this to a min would handle NaNs incorrectly, and swapping
        // the operands would cause it to handle comparisons between positive
        // and negative zero incorrectly.
        if (!DAG.isKnownNeverNaN(LHS) || !DAG.isKnownNeverNaN(RHS)) {
          if (!DAG.getTarget().Options.UnsafeFPMath &&
              !(DAG.isKnownNeverZero(LHS) || DAG.isKnownNeverZero(RHS)))
            break;
          std::swap(LHS, RHS);
        }
        Opcode = X86ISD::FMIN;
        break;
      case ISD::SETOLE:
        // Converting this to a min would handle comparisons between positive
        // and negative zero incorrectly.
        if (!DAG.getTarget().Options.UnsafeFPMath &&
            !DAG.isKnownNeverZero(LHS) && !DAG.isKnownNeverZero(RHS))
          break;
        Opcode = X86ISD::FMIN;
        break;
      case ISD::SETULE:
        // Converting this to a min would handle both negative zeros and NaNs
        // incorrectly, but we can swap the operands to fix both.
        std::swap(LHS, RHS);
        LLVM_FALLTHROUGH;
      case ISD::SETOLT:
      case ISD::SETLT:
      case ISD::SETLE:
        Opcode = X86ISD::FMIN;
        break;

      case ISD::SETOGE:
        // Converting this to a max would handle comparisons between positive
        // and negative zero incorrectly.
        if (!DAG.getTarget().Options.UnsafeFPMath &&
            !DAG.isKnownNeverZero(LHS) && !DAG.isKnownNeverZero(RHS))
          break;
        Opcode = X86ISD::FMAX;
        break;
      case ISD::SETUGT:
        // Converting this to a max would handle NaNs incorrectly, and swapping
        // the operands would cause it to handle comparisons between positive
        // and negative zero incorrectly.
        if (!DAG.isKnownNeverNaN(LHS) || !DAG.isKnownNeverNaN(RHS)) {
          if (!DAG.getTarget().Options.UnsafeFPMath &&
              !(DAG.isKnownNeverZero(LHS) || DAG.isKnownNeverZero(RHS)))
            break;
          std::swap(LHS, RHS);
        }
        Opcode = X86ISD::FMAX;
        break;
      case ISD::SETUGE:
        // Converting this to a max would handle both negative zeros and NaNs
        // incorrectly, but we can swap the operands to fix both.
        std::swap(LHS, RHS);
        LLVM_FALLTHROUGH;
      case ISD::SETOGT:
      case ISD::SETGT:
      case ISD::SETGE:
        Opcode = X86ISD::FMAX;
        break;
      }
    // Check for x CC y ? y : x -- a min/max with reversed arms.
    } else if (DAG.isEqualTo(LHS, Cond.getOperand(1)) &&
               DAG.isEqualTo(RHS, Cond.getOperand(0))) {
      switch (CC) {
      default: break;
      case ISD::SETOGE:
        // Converting this to a min would handle comparisons between positive
        // and negative zero incorrectly, and swapping the operands would
        // cause it to handle NaNs incorrectly.
        if (!DAG.getTarget().Options.UnsafeFPMath &&
            !(DAG.isKnownNeverZero(LHS) || DAG.isKnownNeverZero(RHS))) {
          if (!DAG.isKnownNeverNaN(LHS) || !DAG.isKnownNeverNaN(RHS))
            break;
          std::swap(LHS, RHS);
        }
        Opcode = X86ISD::FMIN;
        break;
      case ISD::SETUGT:
        // Converting this to a min would handle NaNs incorrectly.
        if (!DAG.getTarget().Options.UnsafeFPMath &&
            (!DAG.isKnownNeverNaN(LHS) || !DAG.isKnownNeverNaN(RHS)))
          break;
        Opcode = X86ISD::FMIN;
        break;
      case ISD::SETUGE:
        // Converting this to a min would handle both negative zeros and NaNs
        // incorrectly, but we can swap the operands to fix both.
        std::swap(LHS, RHS);
        LLVM_FALLTHROUGH;
      case ISD::SETOGT:
      case ISD::SETGT:
      case ISD::SETGE:
        Opcode = X86ISD::FMIN;
        break;

      case ISD::SETULT:
        // Converting this to a max would handle NaNs incorrectly.
        if (!DAG.isKnownNeverNaN(LHS) || !DAG.isKnownNeverNaN(RHS))
          break;
        Opcode = X86ISD::FMAX;
        break;
      case ISD::SETOLE:
        // Converting this to a max would handle comparisons between positive
        // and negative zero incorrectly, and swapping the operands would
        // cause it to handle NaNs incorrectly.
        if (!DAG.getTarget().Options.UnsafeFPMath &&
            !DAG.isKnownNeverZero(LHS) && !DAG.isKnownNeverZero(RHS)) {
          if (!DAG.isKnownNeverNaN(LHS) || !DAG.isKnownNeverNaN(RHS))
            break;
          std::swap(LHS, RHS);
        }
        Opcode = X86ISD::FMAX;
        break;
      case ISD::SETULE:
        // Converting this to a max would handle both negative zeros and NaNs
        // incorrectly, but we can swap the operands to fix both.
        std::swap(LHS, RHS);
        LLVM_FALLTHROUGH;
      case ISD::SETOLT:
      case ISD::SETLT:
      case ISD::SETLE:
        Opcode = X86ISD::FMAX;
        break;
      }
    }

    if (Opcode)
      return DAG.getNode(Opcode, DL, N->getValueType(0), LHS, RHS);
  }

  // v16i8 (select v16i1, v16i8, v16i8) does not have a proper
  // lowering on KNL. In this case we convert it to
  // v16i8 (select v16i8, v16i8, v16i8) and use AVX instruction.
  // The same situation for all 128 and 256-bit vectors of i8 and i16.
  // Since SKX these selects have a proper lowering.
  if (Subtarget.hasAVX512() && CondVT.isVector() &&
      CondVT.getVectorElementType() == MVT::i1 &&
      (VT.is128BitVector() || VT.is256BitVector()) &&
      (VT.getVectorElementType() == MVT::i8 ||
       VT.getVectorElementType() == MVT::i16) &&
      !(Subtarget.hasBWI() && Subtarget.hasVLX())) {
    Cond = DAG.getNode(ISD::SIGN_EXTEND, DL, VT, Cond);
    DCI.AddToWorklist(Cond.getNode());
    return DAG.getNode(N->getOpcode(), DL, VT, Cond, LHS, RHS);
  }

  if (SDValue V = combineSelectOfTwoConstants(N, DAG))
    return V;

  // Canonicalize max and min:
  // (x > y) ? x : y -> (x >= y) ? x : y
  // (x < y) ? x : y -> (x <= y) ? x : y
  // This allows use of COND_S / COND_NS (see TranslateX86CC) which eliminates
  // the need for an extra compare
  // against zero. e.g.
  // (x - y) > 0 : (x - y) ? 0 -> (x - y) >= 0 : (x - y) ? 0
  // subl   %esi, %edi
  // testl  %edi, %edi
  // movl   $0, %eax
  // cmovgl %edi, %eax
  // =>
  // xorl   %eax, %eax
  // subl   %esi, $edi
  // cmovsl %eax, %edi
  if (N->getOpcode() == ISD::SELECT && Cond.getOpcode() == ISD::SETCC &&
      DAG.isEqualTo(LHS, Cond.getOperand(0)) &&
      DAG.isEqualTo(RHS, Cond.getOperand(1))) {
    ISD::CondCode CC = cast<CondCodeSDNode>(Cond.getOperand(2))->get();
    switch (CC) {
    default: break;
    case ISD::SETLT:
    case ISD::SETGT: {
      ISD::CondCode NewCC = (CC == ISD::SETLT) ? ISD::SETLE : ISD::SETGE;
      Cond = DAG.getSetCC(SDLoc(Cond), Cond.getValueType(),
                          Cond.getOperand(0), Cond.getOperand(1), NewCC);
      return DAG.getSelect(DL, VT, Cond, LHS, RHS);
    }
    }
  }

  // Early exit check
  if (!TLI.isTypeLegal(VT))
    return SDValue();

  // Match VSELECTs into subs with unsigned saturation.
  if (N->getOpcode() == ISD::VSELECT && Cond.getOpcode() == ISD::SETCC &&
      // psubus is available in SSE2 and AVX2 for i8 and i16 vectors.
      ((Subtarget.hasSSE2() && (VT == MVT::v16i8 || VT == MVT::v8i16)) ||
       (Subtarget.hasAVX2() && (VT == MVT::v32i8 || VT == MVT::v16i16)))) {
    ISD::CondCode CC = cast<CondCodeSDNode>(Cond.getOperand(2))->get();

    // Check if one of the arms of the VSELECT is a zero vector. If it's on the
    // left side invert the predicate to simplify logic below.
    SDValue Other;
    if (ISD::isBuildVectorAllZeros(LHS.getNode())) {
      Other = RHS;
      CC = ISD::getSetCCInverse(CC, true);
    } else if (ISD::isBuildVectorAllZeros(RHS.getNode())) {
      Other = LHS;
    }

    if (Other.getNode() && Other->getNumOperands() == 2 &&
        DAG.isEqualTo(Other->getOperand(0), Cond.getOperand(0))) {
      SDValue OpLHS = Other->getOperand(0), OpRHS = Other->getOperand(1);
      SDValue CondRHS = Cond->getOperand(1);

      // Look for a general sub with unsigned saturation first.
      // x >= y ? x-y : 0 --> subus x, y
      // x >  y ? x-y : 0 --> subus x, y
      if ((CC == ISD::SETUGE || CC == ISD::SETUGT) &&
          Other->getOpcode() == ISD::SUB && DAG.isEqualTo(OpRHS, CondRHS))
        return DAG.getNode(X86ISD::SUBUS, DL, VT, OpLHS, OpRHS);

      if (auto *OpRHSBV = dyn_cast<BuildVectorSDNode>(OpRHS))
        if (auto *OpRHSConst = OpRHSBV->getConstantSplatNode()) {
          if (auto *CondRHSBV = dyn_cast<BuildVectorSDNode>(CondRHS))
            if (auto *CondRHSConst = CondRHSBV->getConstantSplatNode())
              // If the RHS is a constant we have to reverse the const
              // canonicalization.
              // x > C-1 ? x+-C : 0 --> subus x, C
              if (CC == ISD::SETUGT && Other->getOpcode() == ISD::ADD &&
                  CondRHSConst->getAPIntValue() ==
                      (-OpRHSConst->getAPIntValue() - 1))
                return DAG.getNode(
                    X86ISD::SUBUS, DL, VT, OpLHS,
                    DAG.getConstant(-OpRHSConst->getAPIntValue(), DL, VT));

          // Another special case: If C was a sign bit, the sub has been
          // canonicalized into a xor.
          // FIXME: Would it be better to use computeKnownBits to determine
          //        whether it's safe to decanonicalize the xor?
          // x s< 0 ? x^C : 0 --> subus x, C
          if (CC == ISD::SETLT && Other->getOpcode() == ISD::XOR &&
              ISD::isBuildVectorAllZeros(CondRHS.getNode()) &&
              OpRHSConst->getAPIntValue().isSignMask())
            // Note that we have to rebuild the RHS constant here to ensure we
            // don't rely on particular values of undef lanes.
            return DAG.getNode(
                X86ISD::SUBUS, DL, VT, OpLHS,
                DAG.getConstant(OpRHSConst->getAPIntValue(), DL, VT));
        }
    }
  }

  if (SDValue V = combineVSelectWithAllOnesOrZeros(N, DAG, DCI, Subtarget))
    return V;

  // If this is a *dynamic* select (non-constant condition) and we can match
  // this node with one of the variable blend instructions, restructure the
  // condition so that blends can use the high (sign) bit of each element and
  // use SimplifyDemandedBits to simplify the condition operand.
  if (N->getOpcode() == ISD::VSELECT && DCI.isBeforeLegalizeOps() &&
      !DCI.isBeforeLegalize() &&
      !ISD::isBuildVectorOfConstantSDNodes(Cond.getNode())) {
    unsigned BitWidth = Cond.getScalarValueSizeInBits();

    // Don't optimize vector selects that map to mask-registers.
    if (BitWidth == 1)
      return SDValue();

    // We can only handle the cases where VSELECT is directly legal on the
    // subtarget. We custom lower VSELECT nodes with constant conditions and
    // this makes it hard to see whether a dynamic VSELECT will correctly
    // lower, so we both check the operation's status and explicitly handle the
    // cases where a *dynamic* blend will fail even though a constant-condition
    // blend could be custom lowered.
    // FIXME: We should find a better way to handle this class of problems.
    // Potentially, we should combine constant-condition vselect nodes
    // pre-legalization into shuffles and not mark as many types as custom
    // lowered.
    if (!TLI.isOperationLegalOrCustom(ISD::VSELECT, VT))
      return SDValue();
    // FIXME: We don't support i16-element blends currently. We could and
    // should support them by making *all* the bits in the condition be set
    // rather than just the high bit and using an i8-element blend.
    if (VT.getVectorElementType() == MVT::i16)
      return SDValue();
    // Dynamic blending was only available from SSE4.1 onward.
    if (VT.is128BitVector() && !Subtarget.hasSSE41())
      return SDValue();
    // Byte blends are only available in AVX2
    if (VT == MVT::v32i8 && !Subtarget.hasAVX2())
      return SDValue();
    // There are no 512-bit blend instructions that use sign bits.
    if (VT.is512BitVector())
      return SDValue();

    assert(BitWidth >= 8 && BitWidth <= 64 && "Invalid mask size");
    APInt DemandedMask(APInt::getSignMask(BitWidth));
    KnownBits Known;
    TargetLowering::TargetLoweringOpt TLO(DAG, !DCI.isBeforeLegalize(),
                                          !DCI.isBeforeLegalizeOps());
    if (TLI.ShrinkDemandedConstant(Cond, DemandedMask, TLO) ||
        TLI.SimplifyDemandedBits(Cond, DemandedMask, Known, TLO)) {
      // If we changed the computation somewhere in the DAG, this change will
      // affect all users of Cond. Make sure it is fine and update all the nodes
      // so that we do not use the generic VSELECT anymore. Otherwise, we may
      // perform wrong optimizations as we messed with the actual expectation
      // for the vector boolean values.
      if (Cond != TLO.Old) {
        // Check all uses of the condition operand to check whether it will be
        // consumed by non-BLEND instructions. Those may require that all bits
        // are set properly.
        for (SDNode *U : Cond->uses()) {
          // TODO: Add other opcodes eventually lowered into BLEND.
          if (U->getOpcode() != ISD::VSELECT)
            return SDValue();
        }

        // Update all users of the condition before committing the change, so
        // that the VSELECT optimizations that expect the correct vector boolean
        // value will not be triggered.
        for (SDNode *U : Cond->uses()) {
          SDValue SB = DAG.getNode(X86ISD::SHRUNKBLEND, SDLoc(U),
                                   U->getValueType(0), Cond, U->getOperand(1),
                                   U->getOperand(2));
          DAG.ReplaceAllUsesOfValueWith(SDValue(U, 0), SB);
        }
        DCI.CommitTargetLoweringOpt(TLO);
        return SDValue();
      }
      // Only Cond (rather than other nodes in the computation chain) was
      // changed. Change the condition just for N to keep the opportunity to
      // optimize all other users their own way.
      SDValue SB = DAG.getNode(X86ISD::SHRUNKBLEND, DL, VT, TLO.New, LHS, RHS);
      DAG.ReplaceAllUsesOfValueWith(SDValue(N, 0), SB);
      return SDValue();
    }
  }

  // Look for vselects with LHS/RHS being bitcasted from an operation that
  // can be executed on another type. Push the bitcast to the inputs of
  // the operation. This exposes opportunities for using masking instructions.
  if (N->getOpcode() == ISD::VSELECT && DCI.isAfterLegalizeVectorOps() &&
      CondVT.getVectorElementType() == MVT::i1) {
    if (combineBitcastForMaskedOp(LHS, DAG, DCI))
      return SDValue(N, 0);
    if (combineBitcastForMaskedOp(RHS, DAG, DCI))
      return SDValue(N, 0);
  }

  // Custom action for SELECT MMX
  if (VT == MVT::x86mmx) {
    LHS = DAG.getBitcast(MVT::i64, LHS);
    RHS = DAG.getBitcast(MVT::i64, RHS);
    SDValue newSelect = DAG.getNode(ISD::SELECT, DL, MVT::i64, Cond, LHS, RHS);
    return DAG.getBitcast(VT, newSelect);
  }

  return SDValue();
}

/// Combine:
///   (brcond/cmov/setcc .., (cmp (atomic_load_add x, 1), 0), COND_S)
/// to:
///   (brcond/cmov/setcc .., (LADD x, 1), COND_LE)
/// i.e., reusing the EFLAGS produced by the LOCKed instruction.
/// Note that this is only legal for some op/cc combinations.
static SDValue combineSetCCAtomicArith(SDValue Cmp, X86::CondCode &CC,
                                       SelectionDAG &DAG,
                                       const X86Subtarget &Subtarget) {
  // This combine only operates on CMP-like nodes.
  if (!(Cmp.getOpcode() == X86ISD::CMP ||
        (Cmp.getOpcode() == X86ISD::SUB && !Cmp->hasAnyUseOfValue(0))))
    return SDValue();

  // Can't replace the cmp if it has more uses than the one we're looking at.
  // FIXME: We would like to be able to handle this, but would need to make sure
  // all uses were updated.
  if (!Cmp.hasOneUse())
    return SDValue();

  // This only applies to variations of the common case:
  //   (icmp slt x, 0) -> (icmp sle (add x, 1), 0)
  //   (icmp sge x, 0) -> (icmp sgt (add x, 1), 0)
  //   (icmp sle x, 0) -> (icmp slt (sub x, 1), 0)
  //   (icmp sgt x, 0) -> (icmp sge (sub x, 1), 0)
  // Using the proper condcodes (see below), overflow is checked for.

  // FIXME: We can generalize both constraints:
  // - XOR/OR/AND (if they were made to survive AtomicExpand)
  // - LHS != 1
  // if the result is compared.

  SDValue CmpLHS = Cmp.getOperand(0);
  SDValue CmpRHS = Cmp.getOperand(1);

  if (!CmpLHS.hasOneUse())
    return SDValue();

  unsigned Opc = CmpLHS.getOpcode();
  if (Opc != ISD::ATOMIC_LOAD_ADD && Opc != ISD::ATOMIC_LOAD_SUB)
    return SDValue();

  SDValue OpRHS = CmpLHS.getOperand(2);
  auto *OpRHSC = dyn_cast<ConstantSDNode>(OpRHS);
  if (!OpRHSC)
    return SDValue();

  APInt Addend = OpRHSC->getAPIntValue();
  if (Opc == ISD::ATOMIC_LOAD_SUB)
    Addend = -Addend;

  auto *CmpRHSC = dyn_cast<ConstantSDNode>(CmpRHS);
  if (!CmpRHSC)
    return SDValue();

  APInt Comparison = CmpRHSC->getAPIntValue();

  // If the addend is the negation of the comparison value, then we can do
  // a full comparison by emitting the atomic arithmetic as a locked sub.
  if (Comparison == -Addend) {
    // The CC is fine, but we need to rewrite the LHS of the comparison as an
    // atomic sub.
    auto *AN = cast<AtomicSDNode>(CmpLHS.getNode());
    auto AtomicSub = DAG.getAtomic(
        ISD::ATOMIC_LOAD_SUB, SDLoc(CmpLHS), CmpLHS.getValueType(),
        /*Chain*/ CmpLHS.getOperand(0), /*LHS*/ CmpLHS.getOperand(1),
        /*RHS*/ DAG.getConstant(-Addend, SDLoc(CmpRHS), CmpRHS.getValueType()),
        AN->getMemOperand());
    // If the comparision uses the CF flag we can't use INC/DEC instructions.
    bool NeedCF = false;
    switch (CC) {
    default: break;
    case X86::COND_A: case X86::COND_AE:
    case X86::COND_B: case X86::COND_BE:
      NeedCF = true;
      break;
    }
    auto LockOp = lowerAtomicArithWithLOCK(AtomicSub, DAG, Subtarget, !NeedCF);
    DAG.ReplaceAllUsesOfValueWith(CmpLHS.getValue(0),
                                  DAG.getUNDEF(CmpLHS.getValueType()));
    DAG.ReplaceAllUsesOfValueWith(CmpLHS.getValue(1), LockOp.getValue(1));
    return LockOp;
  }

  // We can handle comparisons with zero in a number of cases by manipulating
  // the CC used.
  if (!Comparison.isNullValue())
    return SDValue();

  if (CC == X86::COND_S && Addend == 1)
    CC = X86::COND_LE;
  else if (CC == X86::COND_NS && Addend == 1)
    CC = X86::COND_G;
  else if (CC == X86::COND_G && Addend == -1)
    CC = X86::COND_GE;
  else if (CC == X86::COND_LE && Addend == -1)
    CC = X86::COND_L;
  else
    return SDValue();

  SDValue LockOp = lowerAtomicArithWithLOCK(CmpLHS, DAG, Subtarget);
  DAG.ReplaceAllUsesOfValueWith(CmpLHS.getValue(0),
                                DAG.getUNDEF(CmpLHS.getValueType()));
  DAG.ReplaceAllUsesOfValueWith(CmpLHS.getValue(1), LockOp.getValue(1));
  return LockOp;
}

// Check whether a boolean test is testing a boolean value generated by
// X86ISD::SETCC. If so, return the operand of that SETCC and proper condition
// code.
//
// Simplify the following patterns:
// (Op (CMP (SETCC Cond EFLAGS) 1) EQ) or
// (Op (CMP (SETCC Cond EFLAGS) 0) NEQ)
// to (Op EFLAGS Cond)
//
// (Op (CMP (SETCC Cond EFLAGS) 0) EQ) or
// (Op (CMP (SETCC Cond EFLAGS) 1) NEQ)
// to (Op EFLAGS !Cond)
//
// where Op could be BRCOND or CMOV.
//
static SDValue checkBoolTestSetCCCombine(SDValue Cmp, X86::CondCode &CC) {
  // This combine only operates on CMP-like nodes.
  if (!(Cmp.getOpcode() == X86ISD::CMP ||
        (Cmp.getOpcode() == X86ISD::SUB && !Cmp->hasAnyUseOfValue(0))))
    return SDValue();

  // Quit if not used as a boolean value.
  if (CC != X86::COND_E && CC != X86::COND_NE)
    return SDValue();

  // Check CMP operands. One of them should be 0 or 1 and the other should be
  // an SetCC or extended from it.
  SDValue Op1 = Cmp.getOperand(0);
  SDValue Op2 = Cmp.getOperand(1);

  SDValue SetCC;
  const ConstantSDNode* C = nullptr;
  bool needOppositeCond = (CC == X86::COND_E);
  bool checkAgainstTrue = false; // Is it a comparison against 1?

  if ((C = dyn_cast<ConstantSDNode>(Op1)))
    SetCC = Op2;
  else if ((C = dyn_cast<ConstantSDNode>(Op2)))
    SetCC = Op1;
  else // Quit if all operands are not constants.
    return SDValue();

  if (C->getZExtValue() == 1) {
    needOppositeCond = !needOppositeCond;
    checkAgainstTrue = true;
  } else if (C->getZExtValue() != 0)
    // Quit if the constant is neither 0 or 1.
    return SDValue();

  bool truncatedToBoolWithAnd = false;
  // Skip (zext $x), (trunc $x), or (and $x, 1) node.
  while (SetCC.getOpcode() == ISD::ZERO_EXTEND ||
         SetCC.getOpcode() == ISD::TRUNCATE ||
         SetCC.getOpcode() == ISD::AND) {
    if (SetCC.getOpcode() == ISD::AND) {
      int OpIdx = -1;
      if (isOneConstant(SetCC.getOperand(0)))
        OpIdx = 1;
      if (isOneConstant(SetCC.getOperand(1)))
        OpIdx = 0;
      if (OpIdx < 0)
        break;
      SetCC = SetCC.getOperand(OpIdx);
      truncatedToBoolWithAnd = true;
    } else
      SetCC = SetCC.getOperand(0);
  }

  switch (SetCC.getOpcode()) {
  case X86ISD::SETCC_CARRY:
    // Since SETCC_CARRY gives output based on R = CF ? ~0 : 0, it's unsafe to
    // simplify it if the result of SETCC_CARRY is not canonicalized to 0 or 1,
    // i.e. it's a comparison against true but the result of SETCC_CARRY is not
    // truncated to i1 using 'and'.
    if (checkAgainstTrue && !truncatedToBoolWithAnd)
      break;
    assert(X86::CondCode(SetCC.getConstantOperandVal(0)) == X86::COND_B &&
           "Invalid use of SETCC_CARRY!");
    LLVM_FALLTHROUGH;
  case X86ISD::SETCC:
    // Set the condition code or opposite one if necessary.
    CC = X86::CondCode(SetCC.getConstantOperandVal(0));
    if (needOppositeCond)
      CC = X86::GetOppositeBranchCondition(CC);
    return SetCC.getOperand(1);
  case X86ISD::CMOV: {
    // Check whether false/true value has canonical one, i.e. 0 or 1.
    ConstantSDNode *FVal = dyn_cast<ConstantSDNode>(SetCC.getOperand(0));
    ConstantSDNode *TVal = dyn_cast<ConstantSDNode>(SetCC.getOperand(1));
    // Quit if true value is not a constant.
    if (!TVal)
      return SDValue();
    // Quit if false value is not a constant.
    if (!FVal) {
      SDValue Op = SetCC.getOperand(0);
      // Skip 'zext' or 'trunc' node.
      if (Op.getOpcode() == ISD::ZERO_EXTEND ||
          Op.getOpcode() == ISD::TRUNCATE)
        Op = Op.getOperand(0);
      // A special case for rdrand/rdseed, where 0 is set if false cond is
      // found.
      if ((Op.getOpcode() != X86ISD::RDRAND &&
           Op.getOpcode() != X86ISD::RDSEED) || Op.getResNo() != 0)
        return SDValue();
    }
    // Quit if false value is not the constant 0 or 1.
    bool FValIsFalse = true;
    if (FVal && FVal->getZExtValue() != 0) {
      if (FVal->getZExtValue() != 1)
        return SDValue();
      // If FVal is 1, opposite cond is needed.
      needOppositeCond = !needOppositeCond;
      FValIsFalse = false;
    }
    // Quit if TVal is not the constant opposite of FVal.
    if (FValIsFalse && TVal->getZExtValue() != 1)
      return SDValue();
    if (!FValIsFalse && TVal->getZExtValue() != 0)
      return SDValue();
    CC = X86::CondCode(SetCC.getConstantOperandVal(2));
    if (needOppositeCond)
      CC = X86::GetOppositeBranchCondition(CC);
    return SetCC.getOperand(3);
  }
  }

  return SDValue();
}

/// Check whether Cond is an AND/OR of SETCCs off of the same EFLAGS.
/// Match:
///   (X86or (X86setcc) (X86setcc))
///   (X86cmp (and (X86setcc) (X86setcc)), 0)
static bool checkBoolTestAndOrSetCCCombine(SDValue Cond, X86::CondCode &CC0,
                                           X86::CondCode &CC1, SDValue &Flags,
                                           bool &isAnd) {
  if (Cond->getOpcode() == X86ISD::CMP) {
    if (!isNullConstant(Cond->getOperand(1)))
      return false;

    Cond = Cond->getOperand(0);
  }

  isAnd = false;

  SDValue SetCC0, SetCC1;
  switch (Cond->getOpcode()) {
  default: return false;
  case ISD::AND:
  case X86ISD::AND:
    isAnd = true;
    LLVM_FALLTHROUGH;
  case ISD::OR:
  case X86ISD::OR:
    SetCC0 = Cond->getOperand(0);
    SetCC1 = Cond->getOperand(1);
    break;
  };

  // Make sure we have SETCC nodes, using the same flags value.
  if (SetCC0.getOpcode() != X86ISD::SETCC ||
      SetCC1.getOpcode() != X86ISD::SETCC ||
      SetCC0->getOperand(1) != SetCC1->getOperand(1))
    return false;

  CC0 = (X86::CondCode)SetCC0->getConstantOperandVal(0);
  CC1 = (X86::CondCode)SetCC1->getConstantOperandVal(0);
  Flags = SetCC0->getOperand(1);
  return true;
}

// When legalizing carry, we create carries via add X, -1
// If that comes from an actual carry, via setcc, we use the
// carry directly.
static SDValue combineCarryThroughADD(SDValue EFLAGS) {
  if (EFLAGS.getOpcode() == X86ISD::ADD) {
    if (isAllOnesConstant(EFLAGS.getOperand(1))) {
      SDValue Carry = EFLAGS.getOperand(0);
      while (Carry.getOpcode() == ISD::TRUNCATE ||
             Carry.getOpcode() == ISD::ZERO_EXTEND ||
             Carry.getOpcode() == ISD::SIGN_EXTEND ||
             Carry.getOpcode() == ISD::ANY_EXTEND ||
             (Carry.getOpcode() == ISD::AND &&
              isOneConstant(Carry.getOperand(1))))
        Carry = Carry.getOperand(0);
      if (Carry.getOpcode() == X86ISD::SETCC ||
          Carry.getOpcode() == X86ISD::SETCC_CARRY) {
        if (Carry.getConstantOperandVal(0) == X86::COND_B)
          return Carry.getOperand(1);
      }
    }
  }

  return SDValue();
}

/// Optimize an EFLAGS definition used according to the condition code \p CC
/// into a simpler EFLAGS value, potentially returning a new \p CC and replacing
/// uses of chain values.
static SDValue combineSetCCEFLAGS(SDValue EFLAGS, X86::CondCode &CC,
                                  SelectionDAG &DAG,
                                  const X86Subtarget &Subtarget) {
  if (CC == X86::COND_B)
    if (SDValue Flags = combineCarryThroughADD(EFLAGS))
      return Flags;

  if (SDValue R = checkBoolTestSetCCCombine(EFLAGS, CC))
    return R;
  return combineSetCCAtomicArith(EFLAGS, CC, DAG, Subtarget);
}

/// Optimize X86ISD::CMOV [LHS, RHS, CONDCODE (e.g. X86::COND_NE), CONDVAL]
static SDValue combineCMov(SDNode *N, SelectionDAG &DAG,
                           TargetLowering::DAGCombinerInfo &DCI,
                           const X86Subtarget &Subtarget) {
  SDLoc DL(N);

  SDValue FalseOp = N->getOperand(0);
  SDValue TrueOp = N->getOperand(1);
  X86::CondCode CC = (X86::CondCode)N->getConstantOperandVal(2);
  SDValue Cond = N->getOperand(3);

  if (CC == X86::COND_E || CC == X86::COND_NE) {
    switch (Cond.getOpcode()) {
    default: break;
    case X86ISD::BSR:
    case X86ISD::BSF:
      // If operand of BSR / BSF are proven never zero, then ZF cannot be set.
      if (DAG.isKnownNeverZero(Cond.getOperand(0)))
        return (CC == X86::COND_E) ? FalseOp : TrueOp;
    }
  }

  // Try to simplify the EFLAGS and condition code operands.
  // We can't always do this as FCMOV only supports a subset of X86 cond.
  if (SDValue Flags = combineSetCCEFLAGS(Cond, CC, DAG, Subtarget)) {
    if (FalseOp.getValueType() != MVT::f80 || hasFPCMov(CC)) {
      SDValue Ops[] = {FalseOp, TrueOp, DAG.getConstant(CC, DL, MVT::i8),
        Flags};
      return DAG.getNode(X86ISD::CMOV, DL, N->getValueType(0), Ops);
    }
  }

  // If this is a select between two integer constants, try to do some
  // optimizations.  Note that the operands are ordered the opposite of SELECT
  // operands.
  if (ConstantSDNode *TrueC = dyn_cast<ConstantSDNode>(TrueOp)) {
    if (ConstantSDNode *FalseC = dyn_cast<ConstantSDNode>(FalseOp)) {
      // Canonicalize the TrueC/FalseC values so that TrueC (the true value) is
      // larger than FalseC (the false value).
      if (TrueC->getAPIntValue().ult(FalseC->getAPIntValue())) {
        CC = X86::GetOppositeBranchCondition(CC);
        std::swap(TrueC, FalseC);
        std::swap(TrueOp, FalseOp);
      }

      // Optimize C ? 8 : 0 -> zext(setcc(C)) << 3.  Likewise for any pow2/0.
      // This is efficient for any integer data type (including i8/i16) and
      // shift amount.
      if (FalseC->getAPIntValue() == 0 && TrueC->getAPIntValue().isPowerOf2()) {
        Cond = getSETCC(CC, Cond, DL, DAG);

        // Zero extend the condition if needed.
        Cond = DAG.getNode(ISD::ZERO_EXTEND, DL, TrueC->getValueType(0), Cond);

        unsigned ShAmt = TrueC->getAPIntValue().logBase2();
        Cond = DAG.getNode(ISD::SHL, DL, Cond.getValueType(), Cond,
                           DAG.getConstant(ShAmt, DL, MVT::i8));
        return Cond;
      }

      // Optimize Cond ? cst+1 : cst -> zext(setcc(C)+cst.  This is efficient
      // for any integer data type, including i8/i16.
      if (FalseC->getAPIntValue()+1 == TrueC->getAPIntValue()) {
        Cond = getSETCC(CC, Cond, DL, DAG);

        // Zero extend the condition if needed.
        Cond = DAG.getNode(ISD::ZERO_EXTEND, DL,
                           FalseC->getValueType(0), Cond);
        Cond = DAG.getNode(ISD::ADD, DL, Cond.getValueType(), Cond,
                           SDValue(FalseC, 0));
        return Cond;
      }

      // Optimize cases that will turn into an LEA instruction.  This requires
      // an i32 or i64 and an efficient multiplier (1, 2, 3, 4, 5, 8, 9).
      if (N->getValueType(0) == MVT::i32 || N->getValueType(0) == MVT::i64) {
        uint64_t Diff = TrueC->getZExtValue()-FalseC->getZExtValue();
        if (N->getValueType(0) == MVT::i32) Diff = (unsigned)Diff;

        bool isFastMultiplier = false;
        if (Diff < 10) {
          switch ((unsigned char)Diff) {
          default: break;
          case 1:  // result = add base, cond
          case 2:  // result = lea base(    , cond*2)
          case 3:  // result = lea base(cond, cond*2)
          case 4:  // result = lea base(    , cond*4)
          case 5:  // result = lea base(cond, cond*4)
          case 8:  // result = lea base(    , cond*8)
          case 9:  // result = lea base(cond, cond*8)
            isFastMultiplier = true;
            break;
          }
        }

        if (isFastMultiplier) {
          APInt Diff = TrueC->getAPIntValue()-FalseC->getAPIntValue();
          Cond = getSETCC(CC, Cond, DL ,DAG);
          // Zero extend the condition if needed.
          Cond = DAG.getNode(ISD::ZERO_EXTEND, DL, FalseC->getValueType(0),
                             Cond);
          // Scale the condition by the difference.
          if (Diff != 1)
            Cond = DAG.getNode(ISD::MUL, DL, Cond.getValueType(), Cond,
                               DAG.getConstant(Diff, DL, Cond.getValueType()));

          // Add the base if non-zero.
          if (FalseC->getAPIntValue() != 0)
            Cond = DAG.getNode(ISD::ADD, DL, Cond.getValueType(), Cond,
                               SDValue(FalseC, 0));
          return Cond;
        }
      }
    }
  }

  // Handle these cases:
  //   (select (x != c), e, c) -> select (x != c), e, x),
  //   (select (x == c), c, e) -> select (x == c), x, e)
  // where the c is an integer constant, and the "select" is the combination
  // of CMOV and CMP.
  //
  // The rationale for this change is that the conditional-move from a constant
  // needs two instructions, however, conditional-move from a register needs
  // only one instruction.
  //
  // CAVEAT: By replacing a constant with a symbolic value, it may obscure
  //  some instruction-combining opportunities. This opt needs to be
  //  postponed as late as possible.
  //
  if (!DCI.isBeforeLegalize() && !DCI.isBeforeLegalizeOps()) {
    // the DCI.xxxx conditions are provided to postpone the optimization as
    // late as possible.

    ConstantSDNode *CmpAgainst = nullptr;
    if ((Cond.getOpcode() == X86ISD::CMP || Cond.getOpcode() == X86ISD::SUB) &&
        (CmpAgainst = dyn_cast<ConstantSDNode>(Cond.getOperand(1))) &&
        !isa<ConstantSDNode>(Cond.getOperand(0))) {

      if (CC == X86::COND_NE &&
          CmpAgainst == dyn_cast<ConstantSDNode>(FalseOp)) {
        CC = X86::GetOppositeBranchCondition(CC);
        std::swap(TrueOp, FalseOp);
      }

      if (CC == X86::COND_E &&
          CmpAgainst == dyn_cast<ConstantSDNode>(TrueOp)) {
        SDValue Ops[] = { FalseOp, Cond.getOperand(0),
                          DAG.getConstant(CC, DL, MVT::i8), Cond };
        return DAG.getNode(X86ISD::CMOV, DL, N->getValueType(0), Ops);
      }
    }
  }

  // Fold and/or of setcc's to double CMOV:
  //   (CMOV F, T, ((cc1 | cc2) != 0)) -> (CMOV (CMOV F, T, cc1), T, cc2)
  //   (CMOV F, T, ((cc1 & cc2) != 0)) -> (CMOV (CMOV T, F, !cc1), F, !cc2)
  //
  // This combine lets us generate:
  //   cmovcc1 (jcc1 if we don't have CMOV)
  //   cmovcc2 (same)
  // instead of:
  //   setcc1
  //   setcc2
  //   and/or
  //   cmovne (jne if we don't have CMOV)
  // When we can't use the CMOV instruction, it might increase branch
  // mispredicts.
  // When we can use CMOV, or when there is no mispredict, this improves
  // throughput and reduces register pressure.
  //
  if (CC == X86::COND_NE) {
    SDValue Flags;
    X86::CondCode CC0, CC1;
    bool isAndSetCC;
    if (checkBoolTestAndOrSetCCCombine(Cond, CC0, CC1, Flags, isAndSetCC)) {
      if (isAndSetCC) {
        std::swap(FalseOp, TrueOp);
        CC0 = X86::GetOppositeBranchCondition(CC0);
        CC1 = X86::GetOppositeBranchCondition(CC1);
      }

      SDValue LOps[] = {FalseOp, TrueOp, DAG.getConstant(CC0, DL, MVT::i8),
        Flags};
      SDValue LCMOV = DAG.getNode(X86ISD::CMOV, DL, N->getValueType(0), LOps);
      SDValue Ops[] = {LCMOV, TrueOp, DAG.getConstant(CC1, DL, MVT::i8), Flags};
      SDValue CMOV = DAG.getNode(X86ISD::CMOV, DL, N->getValueType(0), Ops);
      return CMOV;
    }
  }

  return SDValue();
}

/// Different mul shrinking modes.
enum ShrinkMode { MULS8, MULU8, MULS16, MULU16 };

static bool canReduceVMulWidth(SDNode *N, SelectionDAG &DAG, ShrinkMode &Mode) {
  EVT VT = N->getOperand(0).getValueType();
  if (VT.getScalarSizeInBits() != 32)
    return false;

  assert(N->getNumOperands() == 2 && "NumOperands of Mul are 2");
  unsigned SignBits[2] = {1, 1};
  bool IsPositive[2] = {false, false};
  for (unsigned i = 0; i < 2; i++) {
    SDValue Opd = N->getOperand(i);

    // DAG.ComputeNumSignBits return 1 for ISD::ANY_EXTEND, so we need to
    // compute signbits for it separately.
    if (Opd.getOpcode() == ISD::ANY_EXTEND) {
      // For anyextend, it is safe to assume an appropriate number of leading
      // sign/zero bits.
      if (Opd.getOperand(0).getValueType().getVectorElementType() == MVT::i8)
        SignBits[i] = 25;
      else if (Opd.getOperand(0).getValueType().getVectorElementType() ==
               MVT::i16)
        SignBits[i] = 17;
      else
        return false;
      IsPositive[i] = true;
    } else if (Opd.getOpcode() == ISD::BUILD_VECTOR) {
      // All the operands of BUILD_VECTOR need to be int constant.
      // Find the smallest value range which all the operands belong to.
      SignBits[i] = 32;
      IsPositive[i] = true;
      for (const SDValue &SubOp : Opd.getNode()->op_values()) {
        if (SubOp.isUndef())
          continue;
        auto *CN = dyn_cast<ConstantSDNode>(SubOp);
        if (!CN)
          return false;
        APInt IntVal = CN->getAPIntValue();
        if (IntVal.isNegative())
          IsPositive[i] = false;
        SignBits[i] = std::min(SignBits[i], IntVal.getNumSignBits());
      }
    } else {
      SignBits[i] = DAG.ComputeNumSignBits(Opd);
      if (Opd.getOpcode() == ISD::ZERO_EXTEND)
        IsPositive[i] = true;
    }
  }

  bool AllPositive = IsPositive[0] && IsPositive[1];
  unsigned MinSignBits = std::min(SignBits[0], SignBits[1]);
  // When ranges are from -128 ~ 127, use MULS8 mode.
  if (MinSignBits >= 25)
    Mode = MULS8;
  // When ranges are from 0 ~ 255, use MULU8 mode.
  else if (AllPositive && MinSignBits >= 24)
    Mode = MULU8;
  // When ranges are from -32768 ~ 32767, use MULS16 mode.
  else if (MinSignBits >= 17)
    Mode = MULS16;
  // When ranges are from 0 ~ 65535, use MULU16 mode.
  else if (AllPositive && MinSignBits >= 16)
    Mode = MULU16;
  else
    return false;
  return true;
}

/// When the operands of vector mul are extended from smaller size values,
/// like i8 and i16, the type of mul may be shrinked to generate more
/// efficient code. Two typical patterns are handled:
/// Pattern1:
///     %2 = sext/zext <N x i8> %1 to <N x i32>
///     %4 = sext/zext <N x i8> %3 to <N x i32>
//   or %4 = build_vector <N x i32> %C1, ..., %CN (%C1..%CN are constants)
///     %5 = mul <N x i32> %2, %4
///
/// Pattern2:
///     %2 = zext/sext <N x i16> %1 to <N x i32>
///     %4 = zext/sext <N x i16> %3 to <N x i32>
///  or %4 = build_vector <N x i32> %C1, ..., %CN (%C1..%CN are constants)
///     %5 = mul <N x i32> %2, %4
///
/// There are four mul shrinking modes:
/// If %2 == sext32(trunc8(%2)), i.e., the scalar value range of %2 is
/// -128 to 128, and the scalar value range of %4 is also -128 to 128,
/// generate pmullw+sext32 for it (MULS8 mode).
/// If %2 == zext32(trunc8(%2)), i.e., the scalar value range of %2 is
/// 0 to 255, and the scalar value range of %4 is also 0 to 255,
/// generate pmullw+zext32 for it (MULU8 mode).
/// If %2 == sext32(trunc16(%2)), i.e., the scalar value range of %2 is
/// -32768 to 32767, and the scalar value range of %4 is also -32768 to 32767,
/// generate pmullw+pmulhw for it (MULS16 mode).
/// If %2 == zext32(trunc16(%2)), i.e., the scalar value range of %2 is
/// 0 to 65535, and the scalar value range of %4 is also 0 to 65535,
/// generate pmullw+pmulhuw for it (MULU16 mode).
static SDValue reduceVMULWidth(SDNode *N, SelectionDAG &DAG,
                               const X86Subtarget &Subtarget) {
  // Check for legality
  // pmullw/pmulhw are not supported by SSE.
  if (!Subtarget.hasSSE2())
    return SDValue();

  // Check for profitability
  // pmulld is supported since SSE41. It is better to use pmulld
  // instead of pmullw+pmulhw, except for subtargets where pmulld is slower than
  // the expansion.
  bool OptForMinSize = DAG.getMachineFunction().getFunction()->optForMinSize();
  if (Subtarget.hasSSE41() && (OptForMinSize || !Subtarget.isPMULLDSlow()))
    return SDValue();

  ShrinkMode Mode;
  if (!canReduceVMulWidth(N, DAG, Mode))
    return SDValue();

  SDLoc DL(N);
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getOperand(0).getValueType();
  unsigned NumElts = VT.getVectorNumElements();
  if ((NumElts % 2) != 0)
    return SDValue();

  unsigned RegSize = 128;
  MVT OpsVT = MVT::getVectorVT(MVT::i16, RegSize / 16);
  EVT ReducedVT = EVT::getVectorVT(*DAG.getContext(), MVT::i16, NumElts);

  // Shrink the operands of mul.
  SDValue NewN0 = DAG.getNode(ISD::TRUNCATE, DL, ReducedVT, N0);
  SDValue NewN1 = DAG.getNode(ISD::TRUNCATE, DL, ReducedVT, N1);

  if (NumElts >= OpsVT.getVectorNumElements()) {
    // Generate the lower part of mul: pmullw. For MULU8/MULS8, only the
    // lower part is needed.
    SDValue MulLo = DAG.getNode(ISD::MUL, DL, ReducedVT, NewN0, NewN1);
    if (Mode == MULU8 || Mode == MULS8) {
      return DAG.getNode((Mode == MULU8) ? ISD::ZERO_EXTEND : ISD::SIGN_EXTEND,
                         DL, VT, MulLo);
    } else {
      MVT ResVT = MVT::getVectorVT(MVT::i32, NumElts / 2);
      // Generate the higher part of mul: pmulhw/pmulhuw. For MULU16/MULS16,
      // the higher part is also needed.
      SDValue MulHi = DAG.getNode(Mode == MULS16 ? ISD::MULHS : ISD::MULHU, DL,
                                  ReducedVT, NewN0, NewN1);

      // Repack the lower part and higher part result of mul into a wider
      // result.
      // Generate shuffle functioning as punpcklwd.
      SmallVector<int, 16> ShuffleMask(NumElts);
      for (unsigned i = 0, e = NumElts / 2; i < e; i++) {
        ShuffleMask[2 * i] = i;
        ShuffleMask[2 * i + 1] = i + NumElts;
      }
      SDValue ResLo =
          DAG.getVectorShuffle(ReducedVT, DL, MulLo, MulHi, ShuffleMask);
      ResLo = DAG.getBitcast(ResVT, ResLo);
      // Generate shuffle functioning as punpckhwd.
      for (unsigned i = 0, e = NumElts / 2; i < e; i++) {
        ShuffleMask[2 * i] = i + NumElts / 2;
        ShuffleMask[2 * i + 1] = i + NumElts * 3 / 2;
      }
      SDValue ResHi =
          DAG.getVectorShuffle(ReducedVT, DL, MulLo, MulHi, ShuffleMask);
      ResHi = DAG.getBitcast(ResVT, ResHi);
      return DAG.getNode(ISD::CONCAT_VECTORS, DL, VT, ResLo, ResHi);
    }
  } else {
    // When VT.getVectorNumElements() < OpsVT.getVectorNumElements(), we want
    // to legalize the mul explicitly because implicit legalization for type
    // <4 x i16> to <4 x i32> sometimes involves unnecessary unpack
    // instructions which will not exist when we explicitly legalize it by
    // extending <4 x i16> to <8 x i16> (concatenating the <4 x i16> val with
    // <4 x i16> undef).
    //
    // Legalize the operands of mul.
    // FIXME: We may be able to handle non-concatenated vectors by insertion.
    unsigned ReducedSizeInBits = ReducedVT.getSizeInBits();
    if ((RegSize % ReducedSizeInBits) != 0)
      return SDValue();

    SmallVector<SDValue, 16> Ops(RegSize / ReducedSizeInBits,
                                 DAG.getUNDEF(ReducedVT));
    Ops[0] = NewN0;
    NewN0 = DAG.getNode(ISD::CONCAT_VECTORS, DL, OpsVT, Ops);
    Ops[0] = NewN1;
    NewN1 = DAG.getNode(ISD::CONCAT_VECTORS, DL, OpsVT, Ops);

    if (Mode == MULU8 || Mode == MULS8) {
      // Generate lower part of mul: pmullw. For MULU8/MULS8, only the lower
      // part is needed.
      SDValue Mul = DAG.getNode(ISD::MUL, DL, OpsVT, NewN0, NewN1);

      // convert the type of mul result to VT.
      MVT ResVT = MVT::getVectorVT(MVT::i32, RegSize / 32);
      SDValue Res = DAG.getNode(Mode == MULU8 ? ISD::ZERO_EXTEND_VECTOR_INREG
                                              : ISD::SIGN_EXTEND_VECTOR_INREG,
                                DL, ResVT, Mul);
      return DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, VT, Res,
                         DAG.getIntPtrConstant(0, DL));
    } else {
      // Generate the lower and higher part of mul: pmulhw/pmulhuw. For
      // MULU16/MULS16, both parts are needed.
      SDValue MulLo = DAG.getNode(ISD::MUL, DL, OpsVT, NewN0, NewN1);
      SDValue MulHi = DAG.getNode(Mode == MULS16 ? ISD::MULHS : ISD::MULHU, DL,
                                  OpsVT, NewN0, NewN1);

      // Repack the lower part and higher part result of mul into a wider
      // result. Make sure the type of mul result is VT.
      MVT ResVT = MVT::getVectorVT(MVT::i32, RegSize / 32);
      SDValue Res = getUnpackl(DAG, DL, OpsVT, MulLo, MulHi);
      Res = DAG.getBitcast(ResVT, Res);
      return DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, VT, Res,
                         DAG.getIntPtrConstant(0, DL));
    }
  }
}

static SDValue combineMulSpecial(uint64_t MulAmt, SDNode *N, SelectionDAG &DAG,
                                 EVT VT, SDLoc DL) {

  auto combineMulShlAddOrSub = [&](int Mult, int Shift, bool isAdd) {
    SDValue Result = DAG.getNode(X86ISD::MUL_IMM, DL, VT, N->getOperand(0),
                                 DAG.getConstant(Mult, DL, VT));
    Result = DAG.getNode(ISD::SHL, DL, VT, Result,
                         DAG.getConstant(Shift, DL, MVT::i8));
    Result = DAG.getNode(isAdd ? ISD::ADD : ISD::SUB, DL, VT, Result,
                         N->getOperand(0));
    return Result;
  };

  auto combineMulMulAddOrSub = [&](bool isAdd) {
    SDValue Result = DAG.getNode(X86ISD::MUL_IMM, DL, VT, N->getOperand(0),
                                 DAG.getConstant(9, DL, VT));
    Result = DAG.getNode(ISD::MUL, DL, VT, Result, DAG.getConstant(3, DL, VT));
    Result = DAG.getNode(isAdd ? ISD::ADD : ISD::SUB, DL, VT, Result,
                         N->getOperand(0));
    return Result;
  };

  switch (MulAmt) {
  default:
    break;
  case 11:
    // mul x, 11 => add ((shl (mul x, 5), 1), x)
    return combineMulShlAddOrSub(5, 1, /*isAdd*/ true);
  case 21:
    // mul x, 21 => add ((shl (mul x, 5), 2), x)
    return combineMulShlAddOrSub(5, 2, /*isAdd*/ true);
  case 22:
    // mul x, 22 => add (add ((shl (mul x, 5), 2), x), x)
    return DAG.getNode(ISD::ADD, DL, VT, N->getOperand(0),
                       combineMulShlAddOrSub(5, 2, /*isAdd*/ true));
  case 19:
    // mul x, 19 => sub ((shl (mul x, 5), 2), x)
    return combineMulShlAddOrSub(5, 2, /*isAdd*/ false);
  case 13:
    // mul x, 13 => add ((shl (mul x, 3), 2), x)
    return combineMulShlAddOrSub(3, 2, /*isAdd*/ true);
  case 23:
    // mul x, 13 => sub ((shl (mul x, 3), 3), x)
    return combineMulShlAddOrSub(3, 3, /*isAdd*/ false);
  case 14:
    // mul x, 14 => add (add ((shl (mul x, 3), 2), x), x)
    return DAG.getNode(ISD::ADD, DL, VT, N->getOperand(0),
                       combineMulShlAddOrSub(3, 2, /*isAdd*/ true));
  case 26:
    // mul x, 26 => sub ((mul (mul x, 9), 3), x)
    return combineMulMulAddOrSub(/*isAdd*/ false);
  case 28:
    // mul x, 28 => add ((mul (mul x, 9), 3), x)
    return combineMulMulAddOrSub(/*isAdd*/ true);
  case 29:
    // mul x, 29 => add (add ((mul (mul x, 9), 3), x), x)
    return DAG.getNode(ISD::ADD, DL, VT, N->getOperand(0),
                       combineMulMulAddOrSub(/*isAdd*/ true));
  case 30:
    // mul x, 30 => sub (sub ((shl x, 5), x), x)
    return DAG.getNode(
        ISD::SUB, DL, VT,
        DAG.getNode(ISD::SUB, DL, VT,
                    DAG.getNode(ISD::SHL, DL, VT, N->getOperand(0),
                                DAG.getConstant(5, DL, MVT::i8)),
                    N->getOperand(0)),
        N->getOperand(0));
  }
  return SDValue();
}

/// Optimize a single multiply with constant into two operations in order to
/// implement it with two cheaper instructions, e.g. LEA + SHL, LEA + LEA.
static SDValue combineMul(SDNode *N, SelectionDAG &DAG,
                          TargetLowering::DAGCombinerInfo &DCI,
                          const X86Subtarget &Subtarget) {
  EVT VT = N->getValueType(0);
  if (DCI.isBeforeLegalize() && VT.isVector())
    return reduceVMULWidth(N, DAG, Subtarget);

  if (!MulConstantOptimization)
    return SDValue();
  // An imul is usually smaller than the alternative sequence.
  if (DAG.getMachineFunction().getFunction()->optForMinSize())
    return SDValue();

  if (DCI.isBeforeLegalize() || DCI.isCalledByLegalizer())
    return SDValue();

  if (VT != MVT::i64 && VT != MVT::i32)
    return SDValue();

  ConstantSDNode *C = dyn_cast<ConstantSDNode>(N->getOperand(1));
  if (!C)
    return SDValue();
  uint64_t MulAmt = C->getZExtValue();
  if (isPowerOf2_64(MulAmt) || MulAmt == 3 || MulAmt == 5 || MulAmt == 9)
    return SDValue();

  uint64_t MulAmt1 = 0;
  uint64_t MulAmt2 = 0;
  if ((MulAmt % 9) == 0) {
    MulAmt1 = 9;
    MulAmt2 = MulAmt / 9;
  } else if ((MulAmt % 5) == 0) {
    MulAmt1 = 5;
    MulAmt2 = MulAmt / 5;
  } else if ((MulAmt % 3) == 0) {
    MulAmt1 = 3;
    MulAmt2 = MulAmt / 3;
  }

  SDLoc DL(N);
  SDValue NewMul;
  if (MulAmt2 &&
      (isPowerOf2_64(MulAmt2) || MulAmt2 == 3 || MulAmt2 == 5 || MulAmt2 == 9)){

    if (isPowerOf2_64(MulAmt2) &&
        !(N->hasOneUse() && N->use_begin()->getOpcode() == ISD::ADD))
      // If second multiplifer is pow2, issue it first. We want the multiply by
      // 3, 5, or 9 to be folded into the addressing mode unless the lone use
      // is an add.
      std::swap(MulAmt1, MulAmt2);

    if (isPowerOf2_64(MulAmt1))
      NewMul = DAG.getNode(ISD::SHL, DL, VT, N->getOperand(0),
                           DAG.getConstant(Log2_64(MulAmt1), DL, MVT::i8));
    else
      NewMul = DAG.getNode(X86ISD::MUL_IMM, DL, VT, N->getOperand(0),
                           DAG.getConstant(MulAmt1, DL, VT));

    if (isPowerOf2_64(MulAmt2))
      NewMul = DAG.getNode(ISD::SHL, DL, VT, NewMul,
                           DAG.getConstant(Log2_64(MulAmt2), DL, MVT::i8));
    else
      NewMul = DAG.getNode(X86ISD::MUL_IMM, DL, VT, NewMul,
                           DAG.getConstant(MulAmt2, DL, VT));
  } else if (!Subtarget.slowLEA())
    NewMul = combineMulSpecial(MulAmt, N, DAG, VT, DL);

  if (!NewMul) {
    assert(MulAmt != 0 &&
           MulAmt != (VT == MVT::i64 ? UINT64_MAX : UINT32_MAX) &&
           "Both cases that could cause potential overflows should have "
           "already been handled.");
    int64_t SignMulAmt = C->getSExtValue();
    if ((SignMulAmt != INT64_MIN) && (SignMulAmt != INT64_MAX) &&
        (SignMulAmt != -INT64_MAX)) {
      int NumSign = SignMulAmt > 0 ? 1 : -1;
      bool IsPowerOf2_64PlusOne = isPowerOf2_64(NumSign * SignMulAmt - 1);
      bool IsPowerOf2_64MinusOne = isPowerOf2_64(NumSign * SignMulAmt + 1);
      if (IsPowerOf2_64PlusOne) {
        // (mul x, 2^N + 1) => (add (shl x, N), x)
        NewMul = DAG.getNode(
            ISD::ADD, DL, VT, N->getOperand(0),
            DAG.getNode(ISD::SHL, DL, VT, N->getOperand(0),
                        DAG.getConstant(Log2_64(NumSign * SignMulAmt - 1), DL,
                                        MVT::i8)));
      } else if (IsPowerOf2_64MinusOne) {
        // (mul x, 2^N - 1) => (sub (shl x, N), x)
        NewMul = DAG.getNode(
            ISD::SUB, DL, VT,
            DAG.getNode(ISD::SHL, DL, VT, N->getOperand(0),
                        DAG.getConstant(Log2_64(NumSign * SignMulAmt + 1), DL,
                                        MVT::i8)),
            N->getOperand(0));
      }
      // To negate, subtract the number from zero
      if ((IsPowerOf2_64PlusOne || IsPowerOf2_64MinusOne) && NumSign == -1)
        NewMul =
            DAG.getNode(ISD::SUB, DL, VT, DAG.getConstant(0, DL, VT), NewMul);
    }
  }

  if (NewMul)
    // Do not add new nodes to DAG combiner worklist.
    DCI.CombineTo(N, NewMul, false);

  return SDValue();
}

static SDValue combineShiftLeft(SDNode *N, SelectionDAG &DAG) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  ConstantSDNode *N1C = dyn_cast<ConstantSDNode>(N1);
  EVT VT = N0.getValueType();

  // fold (shl (and (setcc_c), c1), c2) -> (and setcc_c, (c1 << c2))
  // since the result of setcc_c is all zero's or all ones.
  if (VT.isInteger() && !VT.isVector() &&
      N1C && N0.getOpcode() == ISD::AND &&
      N0.getOperand(1).getOpcode() == ISD::Constant) {
    SDValue N00 = N0.getOperand(0);
    APInt Mask = cast<ConstantSDNode>(N0.getOperand(1))->getAPIntValue();
    Mask <<= N1C->getAPIntValue();
    bool MaskOK = false;
    // We can handle cases concerning bit-widening nodes containing setcc_c if
    // we carefully interrogate the mask to make sure we are semantics
    // preserving.
    // The transform is not safe if the result of C1 << C2 exceeds the bitwidth
    // of the underlying setcc_c operation if the setcc_c was zero extended.
    // Consider the following example:
    //   zext(setcc_c)                 -> i32 0x0000FFFF
    //   c1                            -> i32 0x0000FFFF
    //   c2                            -> i32 0x00000001
    //   (shl (and (setcc_c), c1), c2) -> i32 0x0001FFFE
    //   (and setcc_c, (c1 << c2))     -> i32 0x0000FFFE
    if (N00.getOpcode() == X86ISD::SETCC_CARRY) {
      MaskOK = true;
    } else if (N00.getOpcode() == ISD::SIGN_EXTEND &&
               N00.getOperand(0).getOpcode() == X86ISD::SETCC_CARRY) {
      MaskOK = true;
    } else if ((N00.getOpcode() == ISD::ZERO_EXTEND ||
                N00.getOpcode() == ISD::ANY_EXTEND) &&
               N00.getOperand(0).getOpcode() == X86ISD::SETCC_CARRY) {
      MaskOK = Mask.isIntN(N00.getOperand(0).getValueSizeInBits());
    }
    if (MaskOK && Mask != 0) {
      SDLoc DL(N);
      return DAG.getNode(ISD::AND, DL, VT, N00, DAG.getConstant(Mask, DL, VT));
    }
  }

  // Hardware support for vector shifts is sparse which makes us scalarize the
  // vector operations in many cases. Also, on sandybridge ADD is faster than
  // shl.
  // (shl V, 1) -> add V,V
  if (auto *N1BV = dyn_cast<BuildVectorSDNode>(N1))
    if (auto *N1SplatC = N1BV->getConstantSplatNode()) {
      assert(N0.getValueType().isVector() && "Invalid vector shift type");
      // We shift all of the values by one. In many cases we do not have
      // hardware support for this operation. This is better expressed as an ADD
      // of two values.
      if (N1SplatC->getAPIntValue() == 1)
        return DAG.getNode(ISD::ADD, SDLoc(N), VT, N0, N0);
    }

  return SDValue();
}

static SDValue combineShiftRightArithmetic(SDNode *N, SelectionDAG &DAG) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N0.getValueType();
  unsigned Size = VT.getSizeInBits();

  // fold (ashr (shl, a, [56,48,32,24,16]), SarConst)
  // into (shl, (sext (a), [56,48,32,24,16] - SarConst)) or
  // into (lshr, (sext (a), SarConst - [56,48,32,24,16]))
  // depending on sign of (SarConst - [56,48,32,24,16])

  // sexts in X86 are MOVs. The MOVs have the same code size
  // as above SHIFTs (only SHIFT on 1 has lower code size).
  // However the MOVs have 2 advantages to a SHIFT:
  // 1. MOVs can write to a register that differs from source
  // 2. MOVs accept memory operands

  if (!VT.isInteger() || VT.isVector() || N1.getOpcode() != ISD::Constant ||
      N0.getOpcode() != ISD::SHL || !N0.hasOneUse() ||
      N0.getOperand(1).getOpcode() != ISD::Constant)
    return SDValue();

  SDValue N00 = N0.getOperand(0);
  SDValue N01 = N0.getOperand(1);
  APInt ShlConst = (cast<ConstantSDNode>(N01))->getAPIntValue();
  APInt SarConst = (cast<ConstantSDNode>(N1))->getAPIntValue();
  EVT CVT = N1.getValueType();

  if (SarConst.isNegative())
    return SDValue();

  for (MVT SVT : MVT::integer_valuetypes()) {
    unsigned ShiftSize = SVT.getSizeInBits();
    // skipping types without corresponding sext/zext and
    // ShlConst that is not one of [56,48,32,24,16]
    if (ShiftSize < 8 || ShiftSize > 64 || ShlConst != Size - ShiftSize)
      continue;
    SDLoc DL(N);
    SDValue NN =
        DAG.getNode(ISD::SIGN_EXTEND_INREG, DL, VT, N00, DAG.getValueType(SVT));
    SarConst = SarConst - (Size - ShiftSize);
    if (SarConst == 0)
      return NN;
    else if (SarConst.isNegative())
      return DAG.getNode(ISD::SHL, DL, VT, NN,
                         DAG.getConstant(-SarConst, DL, CVT));
    else
      return DAG.getNode(ISD::SRA, DL, VT, NN,
                         DAG.getConstant(SarConst, DL, CVT));
  }
  return SDValue();
}

static SDValue combineShiftRightLogical(SDNode *N, SelectionDAG &DAG) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N0.getValueType();

  // Try to improve a sequence of srl (and X, C1), C2 by inverting the order.
  // TODO: This is a generic DAG combine that became an x86-only combine to
  // avoid shortcomings in other folds such as bswap, bit-test ('bt'), and
  // and-not ('andn').
  if (N0.getOpcode() != ISD::AND || !N0.hasOneUse())
    return SDValue();

  auto *ShiftC = dyn_cast<ConstantSDNode>(N1);
  auto *AndC = dyn_cast<ConstantSDNode>(N0.getOperand(1));
  if (!ShiftC || !AndC)
    return SDValue();

  // If we can shrink the constant mask below 8-bits or 32-bits, then this
  // transform should reduce code size. It may also enable secondary transforms
  // from improved known-bits analysis or instruction selection.
  APInt MaskVal = AndC->getAPIntValue();
  APInt NewMaskVal = MaskVal.lshr(ShiftC->getAPIntValue());
  unsigned OldMaskSize = MaskVal.getMinSignedBits();
  unsigned NewMaskSize = NewMaskVal.getMinSignedBits();
  if ((OldMaskSize > 8 && NewMaskSize <= 8) ||
      (OldMaskSize > 32 && NewMaskSize <= 32)) {
    // srl (and X, AndC), ShiftC --> and (srl X, ShiftC), (AndC >> ShiftC)
    SDLoc DL(N);
    SDValue NewMask = DAG.getConstant(NewMaskVal, DL, VT);
    SDValue NewShift = DAG.getNode(ISD::SRL, DL, VT, N0.getOperand(0), N1);
    return DAG.getNode(ISD::AND, DL, VT, NewShift, NewMask);
  }
  return SDValue();
}

/// \brief Returns a vector of 0s if the node in input is a vector logical
/// shift by a constant amount which is known to be bigger than or equal
/// to the vector element size in bits.
static SDValue performShiftToAllZeros(SDNode *N, SelectionDAG &DAG,
                                      const X86Subtarget &Subtarget) {
  EVT VT = N->getValueType(0);

  if (VT != MVT::v2i64 && VT != MVT::v4i32 && VT != MVT::v8i16 &&
      (!Subtarget.hasInt256() ||
       (VT != MVT::v4i64 && VT != MVT::v8i32 && VT != MVT::v16i16)))
    return SDValue();

  SDValue Amt = N->getOperand(1);
  SDLoc DL(N);
  if (auto *AmtBV = dyn_cast<BuildVectorSDNode>(Amt))
    if (auto *AmtSplat = AmtBV->getConstantSplatNode()) {
      const APInt &ShiftAmt = AmtSplat->getAPIntValue();
      unsigned MaxAmount =
        VT.getSimpleVT().getScalarSizeInBits();

      // SSE2/AVX2 logical shifts always return a vector of 0s
      // if the shift amount is bigger than or equal to
      // the element size. The constant shift amount will be
      // encoded as a 8-bit immediate.
      if (ShiftAmt.trunc(8).uge(MaxAmount))
        return getZeroVector(VT.getSimpleVT(), Subtarget, DAG, DL);
    }

  return SDValue();
}

static SDValue combineShift(SDNode* N, SelectionDAG &DAG,
                            TargetLowering::DAGCombinerInfo &DCI,
                            const X86Subtarget &Subtarget) {
  if (N->getOpcode() == ISD::SHL)
    if (SDValue V = combineShiftLeft(N, DAG))
      return V;

  if (N->getOpcode() == ISD::SRA)
    if (SDValue V = combineShiftRightArithmetic(N, DAG))
      return V;

  if (N->getOpcode() == ISD::SRL)
    if (SDValue V = combineShiftRightLogical(N, DAG))
      return V;

  // Try to fold this logical shift into a zero vector.
  if (N->getOpcode() != ISD::SRA)
    if (SDValue V = performShiftToAllZeros(N, DAG, Subtarget))
      return V;

  return SDValue();
}

static SDValue combineVectorPack(SDNode *N, SelectionDAG &DAG,
                                 TargetLowering::DAGCombinerInfo &DCI,
                                 const X86Subtarget &Subtarget) {
  unsigned Opcode = N->getOpcode();
  assert((X86ISD::PACKSS == Opcode || X86ISD::PACKUS == Opcode) &&
         "Unexpected shift opcode");

  EVT VT = N->getValueType(0);
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  unsigned DstBitsPerElt = VT.getScalarSizeInBits();
  unsigned SrcBitsPerElt = 2 * DstBitsPerElt;
  assert(N0.getScalarValueSizeInBits() == SrcBitsPerElt &&
         N1.getScalarValueSizeInBits() == SrcBitsPerElt &&
         "Unexpected PACKSS/PACKUS input type");

  // Constant Folding.
  APInt UndefElts0, UndefElts1;
  SmallVector<APInt, 32> EltBits0, EltBits1;
  if ((N0->isUndef() || N->isOnlyUserOf(N0.getNode())) &&
      (N1->isUndef() || N->isOnlyUserOf(N1.getNode())) &&
      getTargetConstantBitsFromNode(N0, SrcBitsPerElt, UndefElts0, EltBits0) &&
      getTargetConstantBitsFromNode(N1, SrcBitsPerElt, UndefElts1, EltBits1)) {
    unsigned NumLanes = VT.getSizeInBits() / 128;
    unsigned NumDstElts = VT.getVectorNumElements();
    unsigned NumSrcElts = NumDstElts / 2;
    unsigned NumDstEltsPerLane = NumDstElts / NumLanes;
    unsigned NumSrcEltsPerLane = NumSrcElts / NumLanes;
    bool IsSigned = (X86ISD::PACKSS == Opcode);

    APInt Undefs(NumDstElts, 0);
    SmallVector<APInt, 32> Bits(NumDstElts, APInt::getNullValue(DstBitsPerElt));
    for (unsigned Lane = 0; Lane != NumLanes; ++Lane) {
      for (unsigned Elt = 0; Elt != NumDstEltsPerLane; ++Elt) {
        unsigned SrcIdx = Lane * NumSrcEltsPerLane + Elt % NumSrcEltsPerLane;
        auto &UndefElts = (Elt >= NumSrcEltsPerLane ? UndefElts1 : UndefElts0);
        auto &EltBits = (Elt >= NumSrcEltsPerLane ? EltBits1 : EltBits0);

        if (UndefElts[SrcIdx]) {
          Undefs.setBit(Lane * NumDstEltsPerLane + Elt);
          continue;
        }

        APInt &Val = EltBits[SrcIdx];
        if (IsSigned) {
          // PACKSS: Truncate signed value with signed saturation.
          // Source values less than dst minint are saturated to minint.
          // Source values greater than dst maxint are saturated to maxint.
          if (Val.isSignedIntN(DstBitsPerElt))
            Val = Val.trunc(DstBitsPerElt);
          else if (Val.isNegative())
            Val = APInt::getSignedMinValue(DstBitsPerElt);
          else
            Val = APInt::getSignedMaxValue(DstBitsPerElt);
        } else {
          // PACKUS: Truncate signed value with unsigned saturation.
          // Source values less than zero are saturated to zero.
          // Source values greater than dst maxuint are saturated to maxuint.
          if (Val.isIntN(DstBitsPerElt))
            Val = Val.trunc(DstBitsPerElt);
          else if (Val.isNegative())
            Val = APInt::getNullValue(DstBitsPerElt);
          else
            Val = APInt::getAllOnesValue(DstBitsPerElt);
        }
        Bits[Lane * NumDstEltsPerLane + Elt] = Val;
      }
    }

    return getConstVector(Bits, Undefs, VT.getSimpleVT(), DAG, SDLoc(N));
  }

  // Attempt to combine as shuffle.
  SDValue Op(N, 0);
  if (SDValue Res = combineX86ShufflesRecursively(
          {Op}, 0, Op, {0}, {}, /*Depth*/ 1,
          /*HasVarMask*/ false, DAG, DCI, Subtarget)) {
    DCI.CombineTo(N, Res);
    return SDValue();
  }

  return SDValue();
}

static SDValue combineVectorShiftImm(SDNode *N, SelectionDAG &DAG,
                                     TargetLowering::DAGCombinerInfo &DCI,
                                     const X86Subtarget &Subtarget) {
  unsigned Opcode = N->getOpcode();
  assert((X86ISD::VSHLI == Opcode || X86ISD::VSRAI == Opcode ||
          X86ISD::VSRLI == Opcode) &&
         "Unexpected shift opcode");
  bool LogicalShift = X86ISD::VSHLI == Opcode || X86ISD::VSRLI == Opcode;
  EVT VT = N->getValueType(0);
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  unsigned NumBitsPerElt = VT.getScalarSizeInBits();
  assert(VT == N0.getValueType() && (NumBitsPerElt % 8) == 0 &&
         "Unexpected value type");

  // Out of range logical bit shifts are guaranteed to be zero.
  // Out of range arithmetic bit shifts splat the sign bit.
  APInt ShiftVal = cast<ConstantSDNode>(N1)->getAPIntValue();
  if (ShiftVal.zextOrTrunc(8).uge(NumBitsPerElt)) {
    if (LogicalShift)
      return getZeroVector(VT.getSimpleVT(), Subtarget, DAG, SDLoc(N));
    else
      ShiftVal = NumBitsPerElt - 1;
  }

  // Shift N0 by zero -> N0.
  if (!ShiftVal)
    return N0;

  // Shift zero -> zero.
  if (ISD::isBuildVectorAllZeros(N0.getNode()))
    return getZeroVector(VT.getSimpleVT(), Subtarget, DAG, SDLoc(N));

  // fold (VSRLI (VSRAI X, Y), 31) -> (VSRLI X, 31).
  // This VSRLI only looks at the sign bit, which is unmodified by VSRAI.
  // TODO - support other sra opcodes as needed.
  if (Opcode == X86ISD::VSRLI && (ShiftVal + 1) == NumBitsPerElt &&
      N0.getOpcode() == X86ISD::VSRAI)
    return DAG.getNode(X86ISD::VSRLI, SDLoc(N), VT, N0.getOperand(0), N1);

  // fold (VSRAI (VSHLI X, C1), C1) --> X iff NumSignBits(X) > C1
  if (Opcode == X86ISD::VSRAI && N0.getOpcode() == X86ISD::VSHLI &&
      N1 == N0.getOperand(1)) {
    SDValue N00 = N0.getOperand(0);
    unsigned NumSignBits = DAG.ComputeNumSignBits(N00);
    if (ShiftVal.ult(NumSignBits))
      return N00;
  }

  // We can decode 'whole byte' logical bit shifts as shuffles.
  if (LogicalShift && (ShiftVal.getZExtValue() % 8) == 0) {
    SDValue Op(N, 0);
    if (SDValue Res = combineX86ShufflesRecursively(
            {Op}, 0, Op, {0}, {}, /*Depth*/ 1,
            /*HasVarMask*/ false, DAG, DCI, Subtarget)) {
      DCI.CombineTo(N, Res);
      return SDValue();
    }
  }

  // Constant Folding.
  APInt UndefElts;
  SmallVector<APInt, 32> EltBits;
  if (N->isOnlyUserOf(N0.getNode()) &&
      getTargetConstantBitsFromNode(N0, NumBitsPerElt, UndefElts, EltBits)) {
    assert(EltBits.size() == VT.getVectorNumElements() &&
           "Unexpected shift value type");
    unsigned ShiftImm = ShiftVal.getZExtValue();
    for (APInt &Elt : EltBits) {
      if (X86ISD::VSHLI == Opcode)
        Elt <<= ShiftImm;
      else if (X86ISD::VSRAI == Opcode)
        Elt.ashrInPlace(ShiftImm);
      else
        Elt.lshrInPlace(ShiftImm);
    }
    return getConstVector(EltBits, UndefElts, VT.getSimpleVT(), DAG, SDLoc(N));
  }

  return SDValue();
}

static SDValue combineVectorInsert(SDNode *N, SelectionDAG &DAG,
                                   TargetLowering::DAGCombinerInfo &DCI,
                                   const X86Subtarget &Subtarget) {
  assert(
      ((N->getOpcode() == X86ISD::PINSRB && N->getValueType(0) == MVT::v16i8) ||
       (N->getOpcode() == X86ISD::PINSRW &&
        N->getValueType(0) == MVT::v8i16)) &&
      "Unexpected vector insertion");

  // Attempt to combine PINSRB/PINSRW patterns to a shuffle.
  SDValue Op(N, 0);
  if (SDValue Res = combineX86ShufflesRecursively(
          {Op}, 0, Op, {0}, {}, /*Depth*/ 1,
          /*HasVarMask*/ false, DAG, DCI, Subtarget)) {
    DCI.CombineTo(N, Res);
    return SDValue();
  }

  return SDValue();
}

/// Recognize the distinctive (AND (setcc ...) (setcc ..)) where both setccs
/// reference the same FP CMP, and rewrite for CMPEQSS and friends. Likewise for
/// OR -> CMPNEQSS.
static SDValue combineCompareEqual(SDNode *N, SelectionDAG &DAG,
                                   TargetLowering::DAGCombinerInfo &DCI,
                                   const X86Subtarget &Subtarget) {
  unsigned opcode;

  // SSE1 supports CMP{eq|ne}SS, and SSE2 added CMP{eq|ne}SD, but
  // we're requiring SSE2 for both.
  if (Subtarget.hasSSE2() && isAndOrOfSetCCs(SDValue(N, 0U), opcode)) {
    SDValue N0 = N->getOperand(0);
    SDValue N1 = N->getOperand(1);
    SDValue CMP0 = N0->getOperand(1);
    SDValue CMP1 = N1->getOperand(1);
    SDLoc DL(N);

    // The SETCCs should both refer to the same CMP.
    if (CMP0.getOpcode() != X86ISD::CMP || CMP0 != CMP1)
      return SDValue();

    SDValue CMP00 = CMP0->getOperand(0);
    SDValue CMP01 = CMP0->getOperand(1);
    EVT     VT    = CMP00.getValueType();

    if (VT == MVT::f32 || VT == MVT::f64) {
      bool ExpectingFlags = false;
      // Check for any users that want flags:
      for (SDNode::use_iterator UI = N->use_begin(), UE = N->use_end();
           !ExpectingFlags && UI != UE; ++UI)
        switch (UI->getOpcode()) {
        default:
        case ISD::BR_CC:
        case ISD::BRCOND:
        case ISD::SELECT:
          ExpectingFlags = true;
          break;
        case ISD::CopyToReg:
        case ISD::SIGN_EXTEND:
        case ISD::ZERO_EXTEND:
        case ISD::ANY_EXTEND:
          break;
        }

      if (!ExpectingFlags) {
        enum X86::CondCode cc0 = (enum X86::CondCode)N0.getConstantOperandVal(0);
        enum X86::CondCode cc1 = (enum X86::CondCode)N1.getConstantOperandVal(0);

        if (cc1 == X86::COND_E || cc1 == X86::COND_NE) {
          X86::CondCode tmp = cc0;
          cc0 = cc1;
          cc1 = tmp;
        }

        if ((cc0 == X86::COND_E  && cc1 == X86::COND_NP) ||
            (cc0 == X86::COND_NE && cc1 == X86::COND_P)) {
          // FIXME: need symbolic constants for these magic numbers.
          // See X86ATTInstPrinter.cpp:printSSECC().
          unsigned x86cc = (cc0 == X86::COND_E) ? 0 : 4;
          if (Subtarget.hasAVX512()) {
            SDValue FSetCC =
                DAG.getNode(X86ISD::FSETCCM, DL, MVT::v1i1, CMP00, CMP01,
                            DAG.getConstant(x86cc, DL, MVT::i8));
            return DAG.getNode(X86ISD::VEXTRACT, DL, N->getSimpleValueType(0),
                               FSetCC, DAG.getIntPtrConstant(0, DL));
          }
          SDValue OnesOrZeroesF = DAG.getNode(X86ISD::FSETCC, DL,
                                              CMP00.getValueType(), CMP00, CMP01,
                                              DAG.getConstant(x86cc, DL,
                                                              MVT::i8));

          bool is64BitFP = (CMP00.getValueType() == MVT::f64);
          MVT IntVT = is64BitFP ? MVT::i64 : MVT::i32;

          if (is64BitFP && !Subtarget.is64Bit()) {
            // On a 32-bit target, we cannot bitcast the 64-bit float to a
            // 64-bit integer, since that's not a legal type. Since
            // OnesOrZeroesF is all ones of all zeroes, we don't need all the
            // bits, but can do this little dance to extract the lowest 32 bits
            // and work with those going forward.
            SDValue Vector64 = DAG.getNode(ISD::SCALAR_TO_VECTOR, DL, MVT::v2f64,
                                           OnesOrZeroesF);
            SDValue Vector32 = DAG.getBitcast(MVT::v4f32, Vector64);
            OnesOrZeroesF = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, MVT::f32,
                                        Vector32, DAG.getIntPtrConstant(0, DL));
            IntVT = MVT::i32;
          }

          SDValue OnesOrZeroesI = DAG.getBitcast(IntVT, OnesOrZeroesF);
          SDValue ANDed = DAG.getNode(ISD::AND, DL, IntVT, OnesOrZeroesI,
                                      DAG.getConstant(1, DL, IntVT));
          SDValue OneBitOfTruth = DAG.getNode(ISD::TRUNCATE, DL, MVT::i8,
                                              ANDed);
          return OneBitOfTruth;
        }
      }
    }
  }
  return SDValue();
}

/// Try to fold: (and (xor X, -1), Y) -> (andnp X, Y).
static SDValue combineANDXORWithAllOnesIntoANDNP(SDNode *N, SelectionDAG &DAG) {
  assert(N->getOpcode() == ISD::AND);

  EVT VT = N->getValueType(0);
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDLoc DL(N);

  if (VT != MVT::v2i64 && VT != MVT::v4i64 && VT != MVT::v8i64)
    return SDValue();

  if (N0.getOpcode() == ISD::XOR &&
      ISD::isBuildVectorAllOnes(N0.getOperand(1).getNode()))
    return DAG.getNode(X86ISD::ANDNP, DL, VT, N0.getOperand(0), N1);

  if (N1.getOpcode() == ISD::XOR &&
      ISD::isBuildVectorAllOnes(N1.getOperand(1).getNode()))
    return DAG.getNode(X86ISD::ANDNP, DL, VT, N1.getOperand(0), N0);

  return SDValue();
}

// On AVX/AVX2 the type v8i1 is legalized to v8i16, which is an XMM sized
// register. In most cases we actually compare or select YMM-sized registers
// and mixing the two types creates horrible code. This method optimizes
// some of the transition sequences.
static SDValue WidenMaskArithmetic(SDNode *N, SelectionDAG &DAG,
                                 TargetLowering::DAGCombinerInfo &DCI,
                                 const X86Subtarget &Subtarget) {
  EVT VT = N->getValueType(0);
  if (!VT.is256BitVector())
    return SDValue();

  assert((N->getOpcode() == ISD::ANY_EXTEND ||
          N->getOpcode() == ISD::ZERO_EXTEND ||
          N->getOpcode() == ISD::SIGN_EXTEND) && "Invalid Node");

  SDValue Narrow = N->getOperand(0);
  EVT NarrowVT = Narrow->getValueType(0);
  if (!NarrowVT.is128BitVector())
    return SDValue();

  if (Narrow->getOpcode() != ISD::XOR &&
      Narrow->getOpcode() != ISD::AND &&
      Narrow->getOpcode() != ISD::OR)
    return SDValue();

  SDValue N0  = Narrow->getOperand(0);
  SDValue N1  = Narrow->getOperand(1);
  SDLoc DL(Narrow);

  // The Left side has to be a trunc.
  if (N0.getOpcode() != ISD::TRUNCATE)
    return SDValue();

  // The type of the truncated inputs.
  EVT WideVT = N0->getOperand(0)->getValueType(0);
  if (WideVT != VT)
    return SDValue();

  // The right side has to be a 'trunc' or a constant vector.
  bool RHSTrunc = N1.getOpcode() == ISD::TRUNCATE;
  ConstantSDNode *RHSConstSplat = nullptr;
  if (auto *RHSBV = dyn_cast<BuildVectorSDNode>(N1))
    RHSConstSplat = RHSBV->getConstantSplatNode();
  if (!RHSTrunc && !RHSConstSplat)
    return SDValue();

  const TargetLowering &TLI = DAG.getTargetLoweringInfo();

  if (!TLI.isOperationLegalOrPromote(Narrow->getOpcode(), WideVT))
    return SDValue();

  // Set N0 and N1 to hold the inputs to the new wide operation.
  N0 = N0->getOperand(0);
  if (RHSConstSplat) {
    N1 = DAG.getNode(ISD::ZERO_EXTEND, DL, WideVT.getVectorElementType(),
                     SDValue(RHSConstSplat, 0));
    N1 = DAG.getSplatBuildVector(WideVT, DL, N1);
  } else if (RHSTrunc) {
    N1 = N1->getOperand(0);
  }

  // Generate the wide operation.
  SDValue Op = DAG.getNode(Narrow->getOpcode(), DL, WideVT, N0, N1);
  unsigned Opcode = N->getOpcode();
  switch (Opcode) {
  case ISD::ANY_EXTEND:
    return Op;
  case ISD::ZERO_EXTEND: {
    unsigned InBits = NarrowVT.getScalarSizeInBits();
    APInt Mask = APInt::getAllOnesValue(InBits);
    Mask = Mask.zext(VT.getScalarSizeInBits());
    return DAG.getNode(ISD::AND, DL, VT,
                       Op, DAG.getConstant(Mask, DL, VT));
  }
  case ISD::SIGN_EXTEND:
    return DAG.getNode(ISD::SIGN_EXTEND_INREG, DL, VT,
                       Op, DAG.getValueType(NarrowVT));
  default:
    llvm_unreachable("Unexpected opcode");
  }
}

/// If both input operands of a logic op are being cast from floating point
/// types, try to convert this into a floating point logic node to avoid
/// unnecessary moves from SSE to integer registers.
static SDValue convertIntLogicToFPLogic(SDNode *N, SelectionDAG &DAG,
                                        const X86Subtarget &Subtarget) {
  unsigned FPOpcode = ISD::DELETED_NODE;
  if (N->getOpcode() == ISD::AND)
    FPOpcode = X86ISD::FAND;
  else if (N->getOpcode() == ISD::OR)
    FPOpcode = X86ISD::FOR;
  else if (N->getOpcode() == ISD::XOR)
    FPOpcode = X86ISD::FXOR;

  assert(FPOpcode != ISD::DELETED_NODE &&
         "Unexpected input node for FP logic conversion");

  EVT VT = N->getValueType(0);
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDLoc DL(N);
  if (N0.getOpcode() == ISD::BITCAST && N1.getOpcode() == ISD::BITCAST &&
      ((Subtarget.hasSSE1() && VT == MVT::i32) ||
       (Subtarget.hasSSE2() && VT == MVT::i64))) {
    SDValue N00 = N0.getOperand(0);
    SDValue N10 = N1.getOperand(0);
    EVT N00Type = N00.getValueType();
    EVT N10Type = N10.getValueType();
    if (N00Type.isFloatingPoint() && N10Type.isFloatingPoint()) {
      SDValue FPLogic = DAG.getNode(FPOpcode, DL, N00Type, N00, N10);
      return DAG.getBitcast(VT, FPLogic);
    }
  }
  return SDValue();
}

/// If this is a zero/all-bits result that is bitwise-anded with a low bits
/// mask. (Mask == 1 for the x86 lowering of a SETCC + ZEXT), replace the 'and'
/// with a shift-right to eliminate loading the vector constant mask value.
static SDValue combineAndMaskToShift(SDNode *N, SelectionDAG &DAG,
                                     const X86Subtarget &Subtarget) {
  SDValue Op0 = peekThroughBitcasts(N->getOperand(0));
  SDValue Op1 = peekThroughBitcasts(N->getOperand(1));
  EVT VT0 = Op0.getValueType();
  EVT VT1 = Op1.getValueType();

  if (VT0 != VT1 || !VT0.isSimple() || !VT0.isInteger())
    return SDValue();

  APInt SplatVal;
  if (!ISD::isConstantSplatVector(Op1.getNode(), SplatVal) ||
      !SplatVal.isMask())
    return SDValue();

  if (!SupportedVectorShiftWithImm(VT0.getSimpleVT(), Subtarget, ISD::SRL))
    return SDValue();

  unsigned EltBitWidth = VT0.getScalarSizeInBits();
  if (EltBitWidth != DAG.ComputeNumSignBits(Op0))
    return SDValue();

  SDLoc DL(N);
  unsigned ShiftVal = SplatVal.countTrailingOnes();
  SDValue ShAmt = DAG.getConstant(EltBitWidth - ShiftVal, DL, MVT::i8);
  SDValue Shift = DAG.getNode(X86ISD::VSRLI, DL, VT0, Op0, ShAmt);
  return DAG.getBitcast(N->getValueType(0), Shift);
}

static SDValue combineAnd(SDNode *N, SelectionDAG &DAG,
                          TargetLowering::DAGCombinerInfo &DCI,
                          const X86Subtarget &Subtarget) {
  if (DCI.isBeforeLegalizeOps())
    return SDValue();

  if (SDValue R = combineCompareEqual(N, DAG, DCI, Subtarget))
    return R;

  if (SDValue FPLogic = convertIntLogicToFPLogic(N, DAG, Subtarget))
    return FPLogic;

  if (SDValue R = combineANDXORWithAllOnesIntoANDNP(N, DAG))
    return R;

  if (SDValue ShiftRight = combineAndMaskToShift(N, DAG, Subtarget))
    return ShiftRight;

  EVT VT = N->getValueType(0);

  // Attempt to recursively combine a bitmask AND with shuffles.
  if (VT.isVector() && (VT.getScalarSizeInBits() % 8) == 0) {
    SDValue Op(N, 0);
    if (SDValue Res = combineX86ShufflesRecursively(
            {Op}, 0, Op, {0}, {}, /*Depth*/ 1,
            /*HasVarMask*/ false, DAG, DCI, Subtarget)) {
      DCI.CombineTo(N, Res);
      return SDValue();
    }
  }

  // Attempt to combine a scalar bitmask AND with an extracted shuffle.
  if ((VT.getScalarSizeInBits() % 8) == 0 &&
      N->getOperand(0).getOpcode() == ISD::EXTRACT_VECTOR_ELT &&
      isa<ConstantSDNode>(N->getOperand(0).getOperand(1))) {
    SDValue BitMask = N->getOperand(1);
    SDValue SrcVec = N->getOperand(0).getOperand(0);
    EVT SrcVecVT = SrcVec.getValueType();

    // Check that the constant bitmask masks whole bytes.
    APInt UndefElts;
    SmallVector<APInt, 64> EltBits;
    if (VT == SrcVecVT.getScalarType() &&
        N->getOperand(0)->isOnlyUserOf(SrcVec.getNode()) &&
        getTargetConstantBitsFromNode(BitMask, 8, UndefElts, EltBits) &&
        llvm::all_of(EltBits, [](APInt M) {
          return M.isNullValue() || M.isAllOnesValue();
        })) {
      unsigned NumElts = SrcVecVT.getVectorNumElements();
      unsigned Scale = SrcVecVT.getScalarSizeInBits() / 8;
      unsigned Idx = N->getOperand(0).getConstantOperandVal(1);

      // Create a root shuffle mask from the byte mask and the extracted index.
      SmallVector<int, 16> ShuffleMask(NumElts * Scale, SM_SentinelUndef);
      for (unsigned i = 0; i != Scale; ++i) {
        if (UndefElts[i])
          continue;
        int VecIdx = Scale * Idx + i;
        ShuffleMask[VecIdx] =
            EltBits[i].isNullValue() ? SM_SentinelZero : VecIdx;
      }

      if (SDValue Shuffle = combineX86ShufflesRecursively(
              {SrcVec}, 0, SrcVec, ShuffleMask, {}, /*Depth*/ 2,
              /*HasVarMask*/ false, DAG, DCI, Subtarget))
        return DAG.getNode(ISD::EXTRACT_VECTOR_ELT, SDLoc(N), VT, Shuffle,
                           N->getOperand(0).getOperand(1));
    }
  }

  return SDValue();
}

// Try to fold:
//   (or (and (m, y), (pandn m, x)))
// into:
//   (vselect m, x, y)
// As a special case, try to fold:
//   (or (and (m, (sub 0, x)), (pandn m, x)))
// into:
//   (sub (xor X, M), M)
static SDValue combineLogicBlendIntoPBLENDV(SDNode *N, SelectionDAG &DAG,
                                            const X86Subtarget &Subtarget) {
  assert(N->getOpcode() == ISD::OR && "Unexpected Opcode");

  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);

  if (!((VT.is128BitVector() && Subtarget.hasSSE2()) ||
        (VT.is256BitVector() && Subtarget.hasInt256())))
    return SDValue();

  // Canonicalize AND to LHS.
  if (N1.getOpcode() == ISD::AND)
    std::swap(N0, N1);

  // TODO: Attempt to match against AND(XOR(-1,X),Y) as well, waiting for
  // ANDNP combine allows other combines to happen that prevent matching.
  if (N0.getOpcode() != ISD::AND || N1.getOpcode() != X86ISD::ANDNP)
    return SDValue();

  SDValue Mask = N1.getOperand(0);
  SDValue X = N1.getOperand(1);
  SDValue Y;
  if (N0.getOperand(0) == Mask)
    Y = N0.getOperand(1);
  if (N0.getOperand(1) == Mask)
    Y = N0.getOperand(0);

  // Check to see if the mask appeared in both the AND and ANDNP.
  if (!Y.getNode())
    return SDValue();

  // Validate that X, Y, and Mask are bitcasts, and see through them.
  Mask = peekThroughBitcasts(Mask);
  X = peekThroughBitcasts(X);
  Y = peekThroughBitcasts(Y);

  EVT MaskVT = Mask.getValueType();
  unsigned EltBits = MaskVT.getScalarSizeInBits();

  // TODO: Attempt to handle floating point cases as well?
  if (!MaskVT.isInteger() || DAG.ComputeNumSignBits(Mask) != EltBits)
    return SDValue();

  SDLoc DL(N);

  // Try to match:
  //   (or (and (M, (sub 0, X)), (pandn M, X)))
  // which is a special case of vselect:
  //   (vselect M, (sub 0, X), X)
  // Per:
  // http://graphics.stanford.edu/~seander/bithacks.html#ConditionalNegate
  // We know that, if fNegate is 0 or 1:
  //   (fNegate ? -v : v) == ((v ^ -fNegate) + fNegate)
  //
  // Here, we have a mask, M (all 1s or 0), and, similarly, we know that:
  //   ((M & 1) ? -X : X) == ((X ^ -(M & 1)) + (M & 1))
  //   ( M      ? -X : X) == ((X ^   M     ) + (M & 1))
  // This lets us transform our vselect to:
  //   (add (xor X, M), (and M, 1))
  // And further to:
  //   (sub (xor X, M), M)
  if (X.getValueType() == MaskVT && Y.getValueType() == MaskVT &&
      DAG.getTargetLoweringInfo().isOperationLegal(ISD::SUB, MaskVT)) {
    auto IsNegV = [](SDNode *N, SDValue V) {
      return N->getOpcode() == ISD::SUB && N->getOperand(1) == V &&
        ISD::isBuildVectorAllZeros(N->getOperand(0).getNode());
    };
    SDValue V;
    if (IsNegV(Y.getNode(), X))
      V = X;
    else if (IsNegV(X.getNode(), Y))
      V = Y;

    if (V) {
      SDValue SubOp1 = DAG.getNode(ISD::XOR, DL, MaskVT, V, Mask);
      SDValue SubOp2 = Mask;

      // If the negate was on the false side of the select, then
      // the operands of the SUB need to be swapped. PR 27251.
      // This is because the pattern being matched above is
      // (vselect M, (sub (0, X), X)  -> (sub (xor X, M), M)
      // but if the pattern matched was
      // (vselect M, X, (sub (0, X))), that is really negation of the pattern
      // above, -(vselect M, (sub 0, X), X), and therefore the replacement
      // pattern also needs to be a negation of the replacement pattern above.
      // And -(sub X, Y) is just sub (Y, X), so swapping the operands of the
      // sub accomplishes the negation of the replacement pattern.
      if (V == Y)
         std::swap(SubOp1, SubOp2);

      SDValue Res = DAG.getNode(ISD::SUB, DL, MaskVT, SubOp1, SubOp2);
      return DAG.getBitcast(VT, Res);
    }
  }

  // PBLENDVB is only available on SSE 4.1.
  if (!Subtarget.hasSSE41())
    return SDValue();

  MVT BlendVT = (VT == MVT::v4i64) ? MVT::v32i8 : MVT::v16i8;

  X = DAG.getBitcast(BlendVT, X);
  Y = DAG.getBitcast(BlendVT, Y);
  Mask = DAG.getBitcast(BlendVT, Mask);
  Mask = DAG.getSelect(DL, BlendVT, Mask, Y, X);
  return DAG.getBitcast(VT, Mask);
}

// Helper function for combineOrCmpEqZeroToCtlzSrl
// Transforms:
//   seteq(cmp x, 0)
//   into:
//   srl(ctlz x), log2(bitsize(x))
// Input pattern is checked by caller.
static SDValue lowerX86CmpEqZeroToCtlzSrl(SDValue Op, EVT ExtTy,
                                          SelectionDAG &DAG) {
  SDValue Cmp = Op.getOperand(1);
  EVT VT = Cmp.getOperand(0).getValueType();
  unsigned Log2b = Log2_32(VT.getSizeInBits());
  SDLoc dl(Op);
  SDValue Clz = DAG.getNode(ISD::CTLZ, dl, VT, Cmp->getOperand(0));
  // The result of the shift is true or false, and on X86, the 32-bit
  // encoding of shr and lzcnt is more desirable.
  SDValue Trunc = DAG.getZExtOrTrunc(Clz, dl, MVT::i32);
  SDValue Scc = DAG.getNode(ISD::SRL, dl, MVT::i32, Trunc,
                            DAG.getConstant(Log2b, dl, VT));
  return DAG.getZExtOrTrunc(Scc, dl, ExtTy);
}

// Try to transform:
//   zext(or(setcc(eq, (cmp x, 0)), setcc(eq, (cmp y, 0))))
//   into:
//   srl(or(ctlz(x), ctlz(y)), log2(bitsize(x))
// Will also attempt to match more generic cases, eg:
//   zext(or(or(setcc(eq, cmp 0), setcc(eq, cmp 0)), setcc(eq, cmp 0)))
// Only applies if the target supports the FastLZCNT feature.
static SDValue combineOrCmpEqZeroToCtlzSrl(SDNode *N, SelectionDAG &DAG,
                                           TargetLowering::DAGCombinerInfo &DCI,
                                           const X86Subtarget &Subtarget) {
  if (DCI.isBeforeLegalize() || !Subtarget.getTargetLowering()->isCtlzFast())
    return SDValue();

  auto isORCandidate = [](SDValue N) {
    return (N->getOpcode() == ISD::OR && N->hasOneUse());
  };

  // Check the zero extend is extending to 32-bit or more. The code generated by
  // srl(ctlz) for 16-bit or less variants of the pattern would require extra
  // instructions to clear the upper bits.
  if (!N->hasOneUse() || !N->getSimpleValueType(0).bitsGE(MVT::i32) ||
      !isORCandidate(N->getOperand(0)))
    return SDValue();

  // Check the node matches: setcc(eq, cmp 0)
  auto isSetCCCandidate = [](SDValue N) {
    return N->getOpcode() == X86ISD::SETCC && N->hasOneUse() &&
           X86::CondCode(N->getConstantOperandVal(0)) == X86::COND_E &&
           N->getOperand(1).getOpcode() == X86ISD::CMP &&
           isNullConstant(N->getOperand(1).getOperand(1)) &&
           N->getOperand(1).getValueType().bitsGE(MVT::i32);
  };

  SDNode *OR = N->getOperand(0).getNode();
  SDValue LHS = OR->getOperand(0);
  SDValue RHS = OR->getOperand(1);

  // Save nodes matching or(or, setcc(eq, cmp 0)).
  SmallVector<SDNode *, 2> ORNodes;
  while (((isORCandidate(LHS) && isSetCCCandidate(RHS)) ||
          (isORCandidate(RHS) && isSetCCCandidate(LHS)))) {
    ORNodes.push_back(OR);
    OR = (LHS->getOpcode() == ISD::OR) ? LHS.getNode() : RHS.getNode();
    LHS = OR->getOperand(0);
    RHS = OR->getOperand(1);
  }

  // The last OR node should match or(setcc(eq, cmp 0), setcc(eq, cmp 0)).
  if (!(isSetCCCandidate(LHS) && isSetCCCandidate(RHS)) ||
      !isORCandidate(SDValue(OR, 0)))
    return SDValue();

  // We have a or(setcc(eq, cmp 0), setcc(eq, cmp 0)) pattern, try to lower it
  // to
  // or(srl(ctlz),srl(ctlz)).
  // The dag combiner can then fold it into:
  // srl(or(ctlz, ctlz)).
  EVT VT = OR->getValueType(0);
  SDValue NewLHS = lowerX86CmpEqZeroToCtlzSrl(LHS, VT, DAG);
  SDValue Ret, NewRHS;
  if (NewLHS && (NewRHS = lowerX86CmpEqZeroToCtlzSrl(RHS, VT, DAG)))
    Ret = DAG.getNode(ISD::OR, SDLoc(OR), VT, NewLHS, NewRHS);

  if (!Ret)
    return SDValue();

  // Try to lower nodes matching the or(or, setcc(eq, cmp 0)) pattern.
  while (ORNodes.size() > 0) {
    OR = ORNodes.pop_back_val();
    LHS = OR->getOperand(0);
    RHS = OR->getOperand(1);
    // Swap rhs with lhs to match or(setcc(eq, cmp, 0), or).
    if (RHS->getOpcode() == ISD::OR)
      std::swap(LHS, RHS);
    EVT VT = OR->getValueType(0);
    SDValue NewRHS = lowerX86CmpEqZeroToCtlzSrl(RHS, VT, DAG);
    if (!NewRHS)
      return SDValue();
    Ret = DAG.getNode(ISD::OR, SDLoc(OR), VT, Ret, NewRHS);
  }

  if (Ret)
    Ret = DAG.getNode(ISD::ZERO_EXTEND, SDLoc(N), N->getValueType(0), Ret);

  return Ret;
}

static SDValue combineOr(SDNode *N, SelectionDAG &DAG,
                         TargetLowering::DAGCombinerInfo &DCI,
                         const X86Subtarget &Subtarget) {
  if (DCI.isBeforeLegalizeOps())
    return SDValue();

  if (SDValue R = combineCompareEqual(N, DAG, DCI, Subtarget))
    return R;

  if (SDValue FPLogic = convertIntLogicToFPLogic(N, DAG, Subtarget))
    return FPLogic;

  if (SDValue R = combineLogicBlendIntoPBLENDV(N, DAG, Subtarget))
    return R;

  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);

  if (VT != MVT::i16 && VT != MVT::i32 && VT != MVT::i64)
    return SDValue();

  // fold (or (x << c) | (y >> (64 - c))) ==> (shld64 x, y, c)
  bool OptForSize = DAG.getMachineFunction().getFunction()->optForSize();

  // SHLD/SHRD instructions have lower register pressure, but on some
  // platforms they have higher latency than the equivalent
  // series of shifts/or that would otherwise be generated.
  // Don't fold (or (x << c) | (y >> (64 - c))) if SHLD/SHRD instructions
  // have higher latencies and we are not optimizing for size.
  if (!OptForSize && Subtarget.isSHLDSlow())
    return SDValue();

  if (N0.getOpcode() == ISD::SRL && N1.getOpcode() == ISD::SHL)
    std::swap(N0, N1);
  if (N0.getOpcode() != ISD::SHL || N1.getOpcode() != ISD::SRL)
    return SDValue();
  if (!N0.hasOneUse() || !N1.hasOneUse())
    return SDValue();

  SDValue ShAmt0 = N0.getOperand(1);
  if (ShAmt0.getValueType() != MVT::i8)
    return SDValue();
  SDValue ShAmt1 = N1.getOperand(1);
  if (ShAmt1.getValueType() != MVT::i8)
    return SDValue();
  if (ShAmt0.getOpcode() == ISD::TRUNCATE)
    ShAmt0 = ShAmt0.getOperand(0);
  if (ShAmt1.getOpcode() == ISD::TRUNCATE)
    ShAmt1 = ShAmt1.getOperand(0);

  SDLoc DL(N);
  unsigned Opc = X86ISD::SHLD;
  SDValue Op0 = N0.getOperand(0);
  SDValue Op1 = N1.getOperand(0);
  if (ShAmt0.getOpcode() == ISD::SUB ||
      ShAmt0.getOpcode() == ISD::XOR) {
    Opc = X86ISD::SHRD;
    std::swap(Op0, Op1);
    std::swap(ShAmt0, ShAmt1);
  }

  // OR( SHL( X, C ), SRL( Y, 32 - C ) ) -> SHLD( X, Y, C )
  // OR( SRL( X, C ), SHL( Y, 32 - C ) ) -> SHRD( X, Y, C )
  // OR( SHL( X, C ), SRL( SRL( Y, 1 ), XOR( C, 31 ) ) ) -> SHLD( X, Y, C )
  // OR( SRL( X, C ), SHL( SHL( Y, 1 ), XOR( C, 31 ) ) ) -> SHRD( X, Y, C )
  unsigned Bits = VT.getSizeInBits();
  if (ShAmt1.getOpcode() == ISD::SUB) {
    SDValue Sum = ShAmt1.getOperand(0);
    if (ConstantSDNode *SumC = dyn_cast<ConstantSDNode>(Sum)) {
      SDValue ShAmt1Op1 = ShAmt1.getOperand(1);
      if (ShAmt1Op1.getOpcode() == ISD::TRUNCATE)
        ShAmt1Op1 = ShAmt1Op1.getOperand(0);
      if (SumC->getSExtValue() == Bits && ShAmt1Op1 == ShAmt0)
        return DAG.getNode(Opc, DL, VT,
                           Op0, Op1,
                           DAG.getNode(ISD::TRUNCATE, DL,
                                       MVT::i8, ShAmt0));
    }
  } else if (ConstantSDNode *ShAmt1C = dyn_cast<ConstantSDNode>(ShAmt1)) {
    ConstantSDNode *ShAmt0C = dyn_cast<ConstantSDNode>(ShAmt0);
    if (ShAmt0C && (ShAmt0C->getSExtValue() + ShAmt1C->getSExtValue()) == Bits)
      return DAG.getNode(Opc, DL, VT,
                         N0.getOperand(0), N1.getOperand(0),
                         DAG.getNode(ISD::TRUNCATE, DL,
                                       MVT::i8, ShAmt0));
  } else if (ShAmt1.getOpcode() == ISD::XOR) {
    SDValue Mask = ShAmt1.getOperand(1);
    if (ConstantSDNode *MaskC = dyn_cast<ConstantSDNode>(Mask)) {
      unsigned InnerShift = (X86ISD::SHLD == Opc ? ISD::SRL : ISD::SHL);
      SDValue ShAmt1Op0 = ShAmt1.getOperand(0);
      if (ShAmt1Op0.getOpcode() == ISD::TRUNCATE)
        ShAmt1Op0 = ShAmt1Op0.getOperand(0);
      if (MaskC->getSExtValue() == (Bits - 1) && ShAmt1Op0 == ShAmt0) {
        if (Op1.getOpcode() == InnerShift &&
            isa<ConstantSDNode>(Op1.getOperand(1)) &&
            Op1.getConstantOperandVal(1) == 1) {
          return DAG.getNode(Opc, DL, VT, Op0, Op1.getOperand(0),
                             DAG.getNode(ISD::TRUNCATE, DL, MVT::i8, ShAmt0));
        }
        // Test for ADD( Y, Y ) as an equivalent to SHL( Y, 1 ).
        if (InnerShift == ISD::SHL && Op1.getOpcode() == ISD::ADD &&
            Op1.getOperand(0) == Op1.getOperand(1)) {
          return DAG.getNode(Opc, DL, VT, Op0, Op1.getOperand(0),
                     DAG.getNode(ISD::TRUNCATE, DL, MVT::i8, ShAmt0));
        }
      }
    }
  }

  return SDValue();
}

/// Try to turn tests against the signbit in the form of:
///   XOR(TRUNCATE(SRL(X, size(X)-1)), 1)
/// into:
///   SETGT(X, -1)
static SDValue foldXorTruncShiftIntoCmp(SDNode *N, SelectionDAG &DAG) {
  // This is only worth doing if the output type is i8 or i1.
  EVT ResultType = N->getValueType(0);
  if (ResultType != MVT::i8 && ResultType != MVT::i1)
    return SDValue();

  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);

  // We should be performing an xor against a truncated shift.
  if (N0.getOpcode() != ISD::TRUNCATE || !N0.hasOneUse())
    return SDValue();

  // Make sure we are performing an xor against one.
  if (!isOneConstant(N1))
    return SDValue();

  // SetCC on x86 zero extends so only act on this if it's a logical shift.
  SDValue Shift = N0.getOperand(0);
  if (Shift.getOpcode() != ISD::SRL || !Shift.hasOneUse())
    return SDValue();

  // Make sure we are truncating from one of i16, i32 or i64.
  EVT ShiftTy = Shift.getValueType();
  if (ShiftTy != MVT::i16 && ShiftTy != MVT::i32 && ShiftTy != MVT::i64)
    return SDValue();

  // Make sure the shift amount extracts the sign bit.
  if (!isa<ConstantSDNode>(Shift.getOperand(1)) ||
      Shift.getConstantOperandVal(1) != ShiftTy.getSizeInBits() - 1)
    return SDValue();

  // Create a greater-than comparison against -1.
  // N.B. Using SETGE against 0 works but we want a canonical looking
  // comparison, using SETGT matches up with what TranslateX86CC.
  SDLoc DL(N);
  SDValue ShiftOp = Shift.getOperand(0);
  EVT ShiftOpTy = ShiftOp.getValueType();
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  EVT SetCCResultType = TLI.getSetCCResultType(DAG.getDataLayout(),
                                               *DAG.getContext(), ResultType);
  SDValue Cond = DAG.getSetCC(DL, SetCCResultType, ShiftOp,
                              DAG.getConstant(-1, DL, ShiftOpTy), ISD::SETGT);
  if (SetCCResultType != ResultType)
    Cond = DAG.getNode(ISD::ZERO_EXTEND, DL, ResultType, Cond);
  return Cond;
}

/// Turn vector tests of the signbit in the form of:
///   xor (sra X, elt_size(X)-1), -1
/// into:
///   pcmpgt X, -1
///
/// This should be called before type legalization because the pattern may not
/// persist after that.
static SDValue foldVectorXorShiftIntoCmp(SDNode *N, SelectionDAG &DAG,
                                         const X86Subtarget &Subtarget) {
  EVT VT = N->getValueType(0);
  if (!VT.isSimple())
    return SDValue();

  switch (VT.getSimpleVT().SimpleTy) {
  default: return SDValue();
  case MVT::v16i8:
  case MVT::v8i16:
  case MVT::v4i32: if (!Subtarget.hasSSE2()) return SDValue(); break;
  case MVT::v2i64: if (!Subtarget.hasSSE42()) return SDValue(); break;
  case MVT::v32i8:
  case MVT::v16i16:
  case MVT::v8i32:
  case MVT::v4i64: if (!Subtarget.hasAVX2()) return SDValue(); break;
  }

  // There must be a shift right algebraic before the xor, and the xor must be a
  // 'not' operation.
  SDValue Shift = N->getOperand(0);
  SDValue Ones = N->getOperand(1);
  if (Shift.getOpcode() != ISD::SRA || !Shift.hasOneUse() ||
      !ISD::isBuildVectorAllOnes(Ones.getNode()))
    return SDValue();

  // The shift should be smearing the sign bit across each vector element.
  auto *ShiftBV = dyn_cast<BuildVectorSDNode>(Shift.getOperand(1));
  if (!ShiftBV)
    return SDValue();

  EVT ShiftEltTy = Shift.getValueType().getVectorElementType();
  auto *ShiftAmt = ShiftBV->getConstantSplatNode();
  if (!ShiftAmt || ShiftAmt->getZExtValue() != ShiftEltTy.getSizeInBits() - 1)
    return SDValue();

  // Create a greater-than comparison against -1. We don't use the more obvious
  // greater-than-or-equal-to-zero because SSE/AVX don't have that instruction.
  return DAG.getNode(X86ISD::PCMPGT, SDLoc(N), VT, Shift.getOperand(0), Ones);
}

/// Check if truncation with saturation form type \p SrcVT to \p DstVT
/// is valid for the given \p Subtarget.
static bool isSATValidOnAVX512Subtarget(EVT SrcVT, EVT DstVT,
                                        const X86Subtarget &Subtarget) {
  if (!Subtarget.hasAVX512())
    return false;

  // FIXME: Scalar type may be supported if we move it to vector register.
  if (!SrcVT.isVector() || !SrcVT.isSimple() || SrcVT.getSizeInBits() > 512)
    return false;

  EVT SrcElVT = SrcVT.getScalarType();
  EVT DstElVT = DstVT.getScalarType();
  if (SrcElVT.getSizeInBits() < 16 || SrcElVT.getSizeInBits() > 64)
    return false;
  if (DstElVT.getSizeInBits() < 8 || DstElVT.getSizeInBits() > 32)
    return false;
  if (SrcVT.is512BitVector() || Subtarget.hasVLX())
    return SrcElVT.getSizeInBits() >= 32 || Subtarget.hasBWI();
  return false;
}

/// Detect a pattern of truncation with saturation:
/// (truncate (umin (x, unsigned_max_of_dest_type)) to dest_type).
/// Return the source value to be truncated or SDValue() if the pattern was not
/// matched.
static SDValue detectUSatPattern(SDValue In, EVT VT) {
  if (In.getOpcode() != ISD::UMIN)
    return SDValue();

  //Saturation with truncation. We truncate from InVT to VT.
  assert(In.getScalarValueSizeInBits() > VT.getScalarSizeInBits() &&
    "Unexpected types for truncate operation");

  APInt C;
  if (ISD::isConstantSplatVector(In.getOperand(1).getNode(), C)) {
    // C should be equal to UINT32_MAX / UINT16_MAX / UINT8_MAX according
    // the element size of the destination type.
    return C.isMask(VT.getScalarSizeInBits()) ? In.getOperand(0) :
      SDValue();
  }
  return SDValue();
}

/// Detect a pattern of truncation with saturation:
/// (truncate (umin (x, unsigned_max_of_dest_type)) to dest_type).
/// The types should allow to use VPMOVUS* instruction on AVX512.
/// Return the source value to be truncated or SDValue() if the pattern was not
/// matched.
static SDValue detectAVX512USatPattern(SDValue In, EVT VT,
                                       const X86Subtarget &Subtarget) {
  if (!isSATValidOnAVX512Subtarget(In.getValueType(), VT, Subtarget))
    return SDValue();
  return detectUSatPattern(In, VT);
}

static SDValue
combineTruncateWithUSat(SDValue In, EVT VT, SDLoc &DL, SelectionDAG &DAG,
                        const X86Subtarget &Subtarget) {
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  if (!TLI.isTypeLegal(In.getValueType()) || !TLI.isTypeLegal(VT))
    return SDValue();
  if (auto USatVal = detectUSatPattern(In, VT))
    if (isSATValidOnAVX512Subtarget(In.getValueType(), VT, Subtarget))
      return DAG.getNode(X86ISD::VTRUNCUS, DL, VT, USatVal);
  return SDValue();
}

/// This function detects the AVG pattern between vectors of unsigned i8/i16,
/// which is c = (a + b + 1) / 2, and replace this operation with the efficient
/// X86ISD::AVG instruction.
static SDValue detectAVGPattern(SDValue In, EVT VT, SelectionDAG &DAG,
                                const X86Subtarget &Subtarget,
                                const SDLoc &DL) {
  if (!VT.isVector() || !VT.isSimple())
    return SDValue();
  EVT InVT = In.getValueType();
  unsigned NumElems = VT.getVectorNumElements();

  EVT ScalarVT = VT.getVectorElementType();
  if (!((ScalarVT == MVT::i8 || ScalarVT == MVT::i16) &&
        isPowerOf2_32(NumElems)))
    return SDValue();

  // InScalarVT is the intermediate type in AVG pattern and it should be greater
  // than the original input type (i8/i16).
  EVT InScalarVT = InVT.getVectorElementType();
  if (InScalarVT.getSizeInBits() <= ScalarVT.getSizeInBits())
    return SDValue();

  if (!Subtarget.hasSSE2())
    return SDValue();
  if (Subtarget.hasBWI()) {
    if (VT.getSizeInBits() > 512)
      return SDValue();
  } else if (Subtarget.hasAVX2()) {
    if (VT.getSizeInBits() > 256)
      return SDValue();
  } else {
    if (VT.getSizeInBits() > 128)
      return SDValue();
  }

  // Detect the following pattern:
  //
  //   %1 = zext <N x i8> %a to <N x i32>
  //   %2 = zext <N x i8> %b to <N x i32>
  //   %3 = add nuw nsw <N x i32> %1, <i32 1 x N>
  //   %4 = add nuw nsw <N x i32> %3, %2
  //   %5 = lshr <N x i32> %N, <i32 1 x N>
  //   %6 = trunc <N x i32> %5 to <N x i8>
  //
  // In AVX512, the last instruction can also be a trunc store.

  if (In.getOpcode() != ISD::SRL)
    return SDValue();

  // A lambda checking the given SDValue is a constant vector and each element
  // is in the range [Min, Max].
  auto IsConstVectorInRange = [](SDValue V, unsigned Min, unsigned Max) {
    BuildVectorSDNode *BV = dyn_cast<BuildVectorSDNode>(V);
    if (!BV || !BV->isConstant())
      return false;
    for (SDValue Op : V->ops()) {
      ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op);
      if (!C)
        return false;
      uint64_t Val = C->getZExtValue();
      if (Val < Min || Val > Max)
        return false;
    }
    return true;
  };

  // Check if each element of the vector is left-shifted by one.
  auto LHS = In.getOperand(0);
  auto RHS = In.getOperand(1);
  if (!IsConstVectorInRange(RHS, 1, 1))
    return SDValue();
  if (LHS.getOpcode() != ISD::ADD)
    return SDValue();

  // Detect a pattern of a + b + 1 where the order doesn't matter.
  SDValue Operands[3];
  Operands[0] = LHS.getOperand(0);
  Operands[1] = LHS.getOperand(1);

  // Take care of the case when one of the operands is a constant vector whose
  // element is in the range [1, 256].
  if (IsConstVectorInRange(Operands[1], 1, ScalarVT == MVT::i8 ? 256 : 65536) &&
      Operands[0].getOpcode() == ISD::ZERO_EXTEND &&
      Operands[0].getOperand(0).getValueType() == VT) {
    // The pattern is detected. Subtract one from the constant vector, then
    // demote it and emit X86ISD::AVG instruction.
    SDValue VecOnes = DAG.getConstant(1, DL, InVT);
    Operands[1] = DAG.getNode(ISD::SUB, DL, InVT, Operands[1], VecOnes);
    Operands[1] = DAG.getNode(ISD::TRUNCATE, DL, VT, Operands[1]);
    return DAG.getNode(X86ISD::AVG, DL, VT, Operands[0].getOperand(0),
                       Operands[1]);
  }

  if (Operands[0].getOpcode() == ISD::ADD)
    std::swap(Operands[0], Operands[1]);
  else if (Operands[1].getOpcode() != ISD::ADD)
    return SDValue();
  Operands[2] = Operands[1].getOperand(0);
  Operands[1] = Operands[1].getOperand(1);

  // Now we have three operands of two additions. Check that one of them is a
  // constant vector with ones, and the other two are promoted from i8/i16.
  for (int i = 0; i < 3; ++i) {
    if (!IsConstVectorInRange(Operands[i], 1, 1))
      continue;
    std::swap(Operands[i], Operands[2]);

    // Check if Operands[0] and Operands[1] are results of type promotion.
    for (int j = 0; j < 2; ++j)
      if (Operands[j].getOpcode() != ISD::ZERO_EXTEND ||
          Operands[j].getOperand(0).getValueType() != VT)
        return SDValue();

    // The pattern is detected, emit X86ISD::AVG instruction.
    return DAG.getNode(X86ISD::AVG, DL, VT, Operands[0].getOperand(0),
                       Operands[1].getOperand(0));
  }

  return SDValue();
}

static SDValue combineLoad(SDNode *N, SelectionDAG &DAG,
                           TargetLowering::DAGCombinerInfo &DCI,
                           const X86Subtarget &Subtarget) {
  LoadSDNode *Ld = cast<LoadSDNode>(N);
  EVT RegVT = Ld->getValueType(0);
  EVT MemVT = Ld->getMemoryVT();
  SDLoc dl(Ld);
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();

  // For chips with slow 32-byte unaligned loads, break the 32-byte operation
  // into two 16-byte operations. Also split non-temporal aligned loads on
  // pre-AVX2 targets as 32-byte loads will lower to regular temporal loads.
  ISD::LoadExtType Ext = Ld->getExtensionType();
  bool Fast;
  unsigned AddressSpace = Ld->getAddressSpace();
  unsigned Alignment = Ld->getAlignment();
  if (RegVT.is256BitVector() && !DCI.isBeforeLegalizeOps() &&
      Ext == ISD::NON_EXTLOAD &&
      ((Ld->isNonTemporal() && !Subtarget.hasInt256() && Alignment >= 16) ||
       (TLI.allowsMemoryAccess(*DAG.getContext(), DAG.getDataLayout(), RegVT,
                               AddressSpace, Alignment, &Fast) && !Fast))) {
    unsigned NumElems = RegVT.getVectorNumElements();
    if (NumElems < 2)
      return SDValue();

    SDValue Ptr = Ld->getBasePtr();

    EVT HalfVT = EVT::getVectorVT(*DAG.getContext(), MemVT.getScalarType(),
                                  NumElems/2);
    SDValue Load1 =
        DAG.getLoad(HalfVT, dl, Ld->getChain(), Ptr, Ld->getPointerInfo(),
                    Alignment, Ld->getMemOperand()->getFlags());

    Ptr = DAG.getMemBasePlusOffset(Ptr, 16, dl);
    SDValue Load2 =
        DAG.getLoad(HalfVT, dl, Ld->getChain(), Ptr, Ld->getPointerInfo(),
                    std::min(16U, Alignment), Ld->getMemOperand()->getFlags());
    SDValue TF = DAG.getNode(ISD::TokenFactor, dl, MVT::Other,
                             Load1.getValue(1),
                             Load2.getValue(1));

    SDValue NewVec = DAG.getUNDEF(RegVT);
    NewVec = insert128BitVector(NewVec, Load1, 0, DAG, dl);
    NewVec = insert128BitVector(NewVec, Load2, NumElems / 2, DAG, dl);
    return DCI.CombineTo(N, NewVec, TF, true);
  }

  return SDValue();
}

/// If V is a build vector of boolean constants and exactly one of those
/// constants is true, return the operand index of that true element.
/// Otherwise, return -1.
static int getOneTrueElt(SDValue V) {
  // This needs to be a build vector of booleans.
  // TODO: Checking for the i1 type matches the IR definition for the mask,
  // but the mask check could be loosened to i8 or other types. That might
  // also require checking more than 'allOnesValue'; eg, the x86 HW
  // instructions only require that the MSB is set for each mask element.
  // The ISD::MSTORE comments/definition do not specify how the mask operand
  // is formatted.
  auto *BV = dyn_cast<BuildVectorSDNode>(V);
  if (!BV || BV->getValueType(0).getVectorElementType() != MVT::i1)
    return -1;

  int TrueIndex = -1;
  unsigned NumElts = BV->getValueType(0).getVectorNumElements();
  for (unsigned i = 0; i < NumElts; ++i) {
    const SDValue &Op = BV->getOperand(i);
    if (Op.isUndef())
      continue;
    auto *ConstNode = dyn_cast<ConstantSDNode>(Op);
    if (!ConstNode)
      return -1;
    if (ConstNode->getAPIntValue().isAllOnesValue()) {
      // If we already found a one, this is too many.
      if (TrueIndex >= 0)
        return -1;
      TrueIndex = i;
    }
  }
  return TrueIndex;
}

/// Given a masked memory load/store operation, return true if it has one mask
/// bit set. If it has one mask bit set, then also return the memory address of
/// the scalar element to load/store, the vector index to insert/extract that
/// scalar element, and the alignment for the scalar memory access.
static bool getParamsForOneTrueMaskedElt(MaskedLoadStoreSDNode *MaskedOp,
                                         SelectionDAG &DAG, SDValue &Addr,
                                         SDValue &Index, unsigned &Alignment) {
  int TrueMaskElt = getOneTrueElt(MaskedOp->getMask());
  if (TrueMaskElt < 0)
    return false;

  // Get the address of the one scalar element that is specified by the mask
  // using the appropriate offset from the base pointer.
  EVT EltVT = MaskedOp->getMemoryVT().getVectorElementType();
  Addr = MaskedOp->getBasePtr();
  if (TrueMaskElt != 0) {
    unsigned Offset = TrueMaskElt * EltVT.getStoreSize();
    Addr = DAG.getMemBasePlusOffset(Addr, Offset, SDLoc(MaskedOp));
  }

  Index = DAG.getIntPtrConstant(TrueMaskElt, SDLoc(MaskedOp));
  Alignment = MinAlign(MaskedOp->getAlignment(), EltVT.getStoreSize());
  return true;
}

/// If exactly one element of the mask is set for a non-extending masked load,
/// it is a scalar load and vector insert.
/// Note: It is expected that the degenerate cases of an all-zeros or all-ones
/// mask have already been optimized in IR, so we don't bother with those here.
static SDValue
reduceMaskedLoadToScalarLoad(MaskedLoadSDNode *ML, SelectionDAG &DAG,
                             TargetLowering::DAGCombinerInfo &DCI) {
  // TODO: This is not x86-specific, so it could be lifted to DAGCombiner.
  // However, some target hooks may need to be added to know when the transform
  // is profitable. Endianness would also have to be considered.

  SDValue Addr, VecIndex;
  unsigned Alignment;
  if (!getParamsForOneTrueMaskedElt(ML, DAG, Addr, VecIndex, Alignment))
    return SDValue();

  // Load the one scalar element that is specified by the mask using the
  // appropriate offset from the base pointer.
  SDLoc DL(ML);
  EVT VT = ML->getValueType(0);
  EVT EltVT = VT.getVectorElementType();
  SDValue Load =
      DAG.getLoad(EltVT, DL, ML->getChain(), Addr, ML->getPointerInfo(),
                  Alignment, ML->getMemOperand()->getFlags());

  // Insert the loaded element into the appropriate place in the vector.
  SDValue Insert = DAG.getNode(ISD::INSERT_VECTOR_ELT, DL, VT, ML->getSrc0(),
                               Load, VecIndex);
  return DCI.CombineTo(ML, Insert, Load.getValue(1), true);
}

static SDValue
combineMaskedLoadConstantMask(MaskedLoadSDNode *ML, SelectionDAG &DAG,
                              TargetLowering::DAGCombinerInfo &DCI) {
  if (!ISD::isBuildVectorOfConstantSDNodes(ML->getMask().getNode()))
    return SDValue();

  SDLoc DL(ML);
  EVT VT = ML->getValueType(0);

  // If we are loading the first and last elements of a vector, it is safe and
  // always faster to load the whole vector. Replace the masked load with a
  // vector load and select.
  unsigned NumElts = VT.getVectorNumElements();
  BuildVectorSDNode *MaskBV = cast<BuildVectorSDNode>(ML->getMask());
  bool LoadFirstElt = !isNullConstant(MaskBV->getOperand(0));
  bool LoadLastElt = !isNullConstant(MaskBV->getOperand(NumElts - 1));
  if (LoadFirstElt && LoadLastElt) {
    SDValue VecLd = DAG.getLoad(VT, DL, ML->getChain(), ML->getBasePtr(),
                                ML->getMemOperand());
    SDValue Blend = DAG.getSelect(DL, VT, ML->getMask(), VecLd, ML->getSrc0());
    return DCI.CombineTo(ML, Blend, VecLd.getValue(1), true);
  }

  // Convert a masked load with a constant mask into a masked load and a select.
  // This allows the select operation to use a faster kind of select instruction
  // (for example, vblendvps -> vblendps).

  // Don't try this if the pass-through operand is already undefined. That would
  // cause an infinite loop because that's what we're about to create.
  if (ML->getSrc0().isUndef())
    return SDValue();

  // The new masked load has an undef pass-through operand. The select uses the
  // original pass-through operand.
  SDValue NewML = DAG.getMaskedLoad(VT, DL, ML->getChain(), ML->getBasePtr(),
                                    ML->getMask(), DAG.getUNDEF(VT),
                                    ML->getMemoryVT(), ML->getMemOperand(),
                                    ML->getExtensionType());
  SDValue Blend = DAG.getSelect(DL, VT, ML->getMask(), NewML, ML->getSrc0());

  return DCI.CombineTo(ML, Blend, NewML.getValue(1), true);
}

static SDValue combineMaskedLoad(SDNode *N, SelectionDAG &DAG,
                                 TargetLowering::DAGCombinerInfo &DCI,
                                 const X86Subtarget &Subtarget) {
  MaskedLoadSDNode *Mld = cast<MaskedLoadSDNode>(N);

  // TODO: Expanding load with constant mask may be optimized as well.
  if (Mld->isExpandingLoad())
    return SDValue();

  if (Mld->getExtensionType() == ISD::NON_EXTLOAD) {
    if (SDValue ScalarLoad = reduceMaskedLoadToScalarLoad(Mld, DAG, DCI))
      return ScalarLoad;
    // TODO: Do some AVX512 subsets benefit from this transform?
    if (!Subtarget.hasAVX512())
      if (SDValue Blend = combineMaskedLoadConstantMask(Mld, DAG, DCI))
        return Blend;
  }

  if (Mld->getExtensionType() != ISD::SEXTLOAD)
    return SDValue();

  // Resolve extending loads.
  EVT VT = Mld->getValueType(0);
  unsigned NumElems = VT.getVectorNumElements();
  EVT LdVT = Mld->getMemoryVT();
  SDLoc dl(Mld);

  assert(LdVT != VT && "Cannot extend to the same type");
  unsigned ToSz = VT.getScalarSizeInBits();
  unsigned FromSz = LdVT.getScalarSizeInBits();
  // From/To sizes and ElemCount must be pow of two.
  assert (isPowerOf2_32(NumElems * FromSz * ToSz) &&
    "Unexpected size for extending masked load");

  unsigned SizeRatio  = ToSz / FromSz;
  assert(SizeRatio * NumElems * FromSz == VT.getSizeInBits());

  // Create a type on which we perform the shuffle.
  EVT WideVecVT = EVT::getVectorVT(*DAG.getContext(),
          LdVT.getScalarType(), NumElems*SizeRatio);
  assert(WideVecVT.getSizeInBits() == VT.getSizeInBits());

  // Convert Src0 value.
  SDValue WideSrc0 = DAG.getBitcast(WideVecVT, Mld->getSrc0());
  if (!Mld->getSrc0().isUndef()) {
    SmallVector<int, 16> ShuffleVec(NumElems * SizeRatio, -1);
    for (unsigned i = 0; i != NumElems; ++i)
      ShuffleVec[i] = i * SizeRatio;

    // Can't shuffle using an illegal type.
    assert(DAG.getTargetLoweringInfo().isTypeLegal(WideVecVT) &&
           "WideVecVT should be legal");
    WideSrc0 = DAG.getVectorShuffle(WideVecVT, dl, WideSrc0,
                                    DAG.getUNDEF(WideVecVT), ShuffleVec);
  }

  // Prepare the new mask.
  SDValue NewMask;
  SDValue Mask = Mld->getMask();
  if (Mask.getValueType() == VT) {
    // Mask and original value have the same type.
    NewMask = DAG.getBitcast(WideVecVT, Mask);
    SmallVector<int, 16> ShuffleVec(NumElems * SizeRatio, -1);
    for (unsigned i = 0; i != NumElems; ++i)
      ShuffleVec[i] = i * SizeRatio;
    for (unsigned i = NumElems; i != NumElems * SizeRatio; ++i)
      ShuffleVec[i] = NumElems * SizeRatio;
    NewMask = DAG.getVectorShuffle(WideVecVT, dl, NewMask,
                                   DAG.getConstant(0, dl, WideVecVT),
                                   ShuffleVec);
  } else {
    assert(Mask.getValueType().getVectorElementType() == MVT::i1);
    unsigned WidenNumElts = NumElems*SizeRatio;
    unsigned MaskNumElts = VT.getVectorNumElements();
    EVT NewMaskVT = EVT::getVectorVT(*DAG.getContext(),  MVT::i1,
                                     WidenNumElts);

    unsigned NumConcat = WidenNumElts / MaskNumElts;
    SDValue ZeroVal = DAG.getConstant(0, dl, Mask.getValueType());
    SmallVector<SDValue, 16> Ops(NumConcat, ZeroVal);
    Ops[0] = Mask;
    NewMask = DAG.getNode(ISD::CONCAT_VECTORS, dl, NewMaskVT, Ops);
  }

  SDValue WideLd = DAG.getMaskedLoad(WideVecVT, dl, Mld->getChain(),
                                     Mld->getBasePtr(), NewMask, WideSrc0,
                                     Mld->getMemoryVT(), Mld->getMemOperand(),
                                     ISD::NON_EXTLOAD);
  SDValue NewVec = getExtendInVec(X86ISD::VSEXT, dl, VT, WideLd, DAG);
  return DCI.CombineTo(N, NewVec, WideLd.getValue(1), true);
}

/// If exactly one element of the mask is set for a non-truncating masked store,
/// it is a vector extract and scalar store.
/// Note: It is expected that the degenerate cases of an all-zeros or all-ones
/// mask have already been optimized in IR, so we don't bother with those here.
static SDValue reduceMaskedStoreToScalarStore(MaskedStoreSDNode *MS,
                                              SelectionDAG &DAG) {
  // TODO: This is not x86-specific, so it could be lifted to DAGCombiner.
  // However, some target hooks may need to be added to know when the transform
  // is profitable. Endianness would also have to be considered.

  SDValue Addr, VecIndex;
  unsigned Alignment;
  if (!getParamsForOneTrueMaskedElt(MS, DAG, Addr, VecIndex, Alignment))
    return SDValue();

  // Extract the one scalar element that is actually being stored.
  SDLoc DL(MS);
  EVT VT = MS->getValue().getValueType();
  EVT EltVT = VT.getVectorElementType();
  SDValue Extract = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, EltVT,
                                MS->getValue(), VecIndex);

  // Store that element at the appropriate offset from the base pointer.
  return DAG.getStore(MS->getChain(), DL, Extract, Addr, MS->getPointerInfo(),
                      Alignment, MS->getMemOperand()->getFlags());
}

static SDValue combineMaskedStore(SDNode *N, SelectionDAG &DAG,
                                  const X86Subtarget &Subtarget) {
  MaskedStoreSDNode *Mst = cast<MaskedStoreSDNode>(N);

  if (Mst->isCompressingStore())
    return SDValue();

  if (!Mst->isTruncatingStore()) {
    if (SDValue ScalarStore = reduceMaskedStoreToScalarStore(Mst, DAG))
      return ScalarStore;

    // If the mask is checking (0 > X), we're creating a vector with all-zeros
    // or all-ones elements based on the sign bits of X. AVX1 masked store only
    // cares about the sign bit of each mask element, so eliminate the compare:
    // mstore val, ptr, (pcmpgt 0, X) --> mstore val, ptr, X
    // Note that by waiting to match an x86-specific PCMPGT node, we're
    // eliminating potentially more complex matching of a setcc node which has
    // a full range of predicates.
    SDValue Mask = Mst->getMask();
    if (Mask.getOpcode() == X86ISD::PCMPGT &&
        ISD::isBuildVectorAllZeros(Mask.getOperand(0).getNode())) {
      assert(Mask.getValueType() == Mask.getOperand(1).getValueType() &&
             "Unexpected type for PCMPGT");
      return DAG.getMaskedStore(
          Mst->getChain(), SDLoc(N), Mst->getValue(), Mst->getBasePtr(),
          Mask.getOperand(1), Mst->getMemoryVT(), Mst->getMemOperand());
    }

    // TODO: AVX512 targets should also be able to simplify something like the
    // pattern above, but that pattern will be different. It will either need to
    // match setcc more generally or match PCMPGTM later (in tablegen?).

    return SDValue();
  }

  // Resolve truncating stores.
  EVT VT = Mst->getValue().getValueType();
  unsigned NumElems = VT.getVectorNumElements();
  EVT StVT = Mst->getMemoryVT();
  SDLoc dl(Mst);

  assert(StVT != VT && "Cannot truncate to the same type");
  unsigned FromSz = VT.getScalarSizeInBits();
  unsigned ToSz = StVT.getScalarSizeInBits();

  const TargetLowering &TLI = DAG.getTargetLoweringInfo();

  // The truncating store is legal in some cases. For example
  // vpmovqb, vpmovqw, vpmovqd, vpmovdb, vpmovdw
  // are designated for truncate store.
  // In this case we don't need any further transformations.
  if (TLI.isTruncStoreLegal(VT, StVT))
    return SDValue();

  // From/To sizes and ElemCount must be pow of two.
  assert (isPowerOf2_32(NumElems * FromSz * ToSz) &&
    "Unexpected size for truncating masked store");
  // We are going to use the original vector elt for storing.
  // Accumulated smaller vector elements must be a multiple of the store size.
  assert (((NumElems * FromSz) % ToSz) == 0 &&
          "Unexpected ratio for truncating masked store");

  unsigned SizeRatio  = FromSz / ToSz;
  assert(SizeRatio * NumElems * ToSz == VT.getSizeInBits());

  // Create a type on which we perform the shuffle.
  EVT WideVecVT = EVT::getVectorVT(*DAG.getContext(),
          StVT.getScalarType(), NumElems*SizeRatio);

  assert(WideVecVT.getSizeInBits() == VT.getSizeInBits());

  SDValue WideVec = DAG.getBitcast(WideVecVT, Mst->getValue());
  SmallVector<int, 16> ShuffleVec(NumElems * SizeRatio, -1);
  for (unsigned i = 0; i != NumElems; ++i)
    ShuffleVec[i] = i * SizeRatio;

  // Can't shuffle using an illegal type.
  assert(DAG.getTargetLoweringInfo().isTypeLegal(WideVecVT) &&
         "WideVecVT should be legal");

  SDValue TruncatedVal = DAG.getVectorShuffle(WideVecVT, dl, WideVec,
                                              DAG.getUNDEF(WideVecVT),
                                              ShuffleVec);

  SDValue NewMask;
  SDValue Mask = Mst->getMask();
  if (Mask.getValueType() == VT) {
    // Mask and original value have the same type.
    NewMask = DAG.getBitcast(WideVecVT, Mask);
    for (unsigned i = 0; i != NumElems; ++i)
      ShuffleVec[i] = i * SizeRatio;
    for (unsigned i = NumElems; i != NumElems*SizeRatio; ++i)
      ShuffleVec[i] = NumElems*SizeRatio;
    NewMask = DAG.getVectorShuffle(WideVecVT, dl, NewMask,
                                   DAG.getConstant(0, dl, WideVecVT),
                                   ShuffleVec);
  } else {
    assert(Mask.getValueType().getVectorElementType() == MVT::i1);
    unsigned WidenNumElts = NumElems*SizeRatio;
    unsigned MaskNumElts = VT.getVectorNumElements();
    EVT NewMaskVT = EVT::getVectorVT(*DAG.getContext(),  MVT::i1,
                                     WidenNumElts);

    unsigned NumConcat = WidenNumElts / MaskNumElts;
    SDValue ZeroVal = DAG.getConstant(0, dl, Mask.getValueType());
    SmallVector<SDValue, 16> Ops(NumConcat, ZeroVal);
    Ops[0] = Mask;
    NewMask = DAG.getNode(ISD::CONCAT_VECTORS, dl, NewMaskVT, Ops);
  }

  return DAG.getMaskedStore(Mst->getChain(), dl, TruncatedVal,
                            Mst->getBasePtr(), NewMask, StVT,
                            Mst->getMemOperand(), false);
}

static SDValue combineStore(SDNode *N, SelectionDAG &DAG,
                            const X86Subtarget &Subtarget) {
  StoreSDNode *St = cast<StoreSDNode>(N);
  EVT VT = St->getValue().getValueType();
  EVT StVT = St->getMemoryVT();
  SDLoc dl(St);
  SDValue StoredVal = St->getOperand(1);
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();

  // If we are saving a concatenation of two XMM registers and 32-byte stores
  // are slow, such as on Sandy Bridge, perform two 16-byte stores.
  bool Fast;
  unsigned AddressSpace = St->getAddressSpace();
  unsigned Alignment = St->getAlignment();
  if (VT.is256BitVector() && StVT == VT &&
      TLI.allowsMemoryAccess(*DAG.getContext(), DAG.getDataLayout(), VT,
                             AddressSpace, Alignment, &Fast) &&
      !Fast) {
    unsigned NumElems = VT.getVectorNumElements();
    if (NumElems < 2)
      return SDValue();

    SDValue Value0 = extract128BitVector(StoredVal, 0, DAG, dl);
    SDValue Value1 = extract128BitVector(StoredVal, NumElems / 2, DAG, dl);

    SDValue Ptr0 = St->getBasePtr();
    SDValue Ptr1 = DAG.getMemBasePlusOffset(Ptr0, 16, dl);

    SDValue Ch0 =
        DAG.getStore(St->getChain(), dl, Value0, Ptr0, St->getPointerInfo(),
                     Alignment, St->getMemOperand()->getFlags());
    SDValue Ch1 =
        DAG.getStore(St->getChain(), dl, Value1, Ptr1, St->getPointerInfo(),
                     std::min(16U, Alignment), St->getMemOperand()->getFlags());
    return DAG.getNode(ISD::TokenFactor, dl, MVT::Other, Ch0, Ch1);
  }

  // Optimize trunc store (of multiple scalars) to shuffle and store.
  // First, pack all of the elements in one place. Next, store to memory
  // in fewer chunks.
  if (St->isTruncatingStore() && VT.isVector()) {
    // Check if we can detect an AVG pattern from the truncation. If yes,
    // replace the trunc store by a normal store with the result of X86ISD::AVG
    // instruction.
    if (SDValue Avg = detectAVGPattern(St->getValue(), St->getMemoryVT(), DAG,
                                       Subtarget, dl))
      return DAG.getStore(St->getChain(), dl, Avg, St->getBasePtr(),
                          St->getPointerInfo(), St->getAlignment(),
                          St->getMemOperand()->getFlags());

    if (SDValue Val =
        detectAVX512USatPattern(St->getValue(), St->getMemoryVT(), Subtarget))
      return EmitTruncSStore(false /* Unsigned saturation */, St->getChain(),
                             dl, Val, St->getBasePtr(),
                             St->getMemoryVT(), St->getMemOperand(), DAG);

    const TargetLowering &TLI = DAG.getTargetLoweringInfo();
    unsigned NumElems = VT.getVectorNumElements();
    assert(StVT != VT && "Cannot truncate to the same type");
    unsigned FromSz = VT.getScalarSizeInBits();
    unsigned ToSz = StVT.getScalarSizeInBits();

    // The truncating store is legal in some cases. For example
    // vpmovqb, vpmovqw, vpmovqd, vpmovdb, vpmovdw
    // are designated for truncate store.
    // In this case we don't need any further transformations.
    if (TLI.isTruncStoreLegalOrCustom(VT, StVT))
      return SDValue();

    // From, To sizes and ElemCount must be pow of two
    if (!isPowerOf2_32(NumElems * FromSz * ToSz)) return SDValue();
    // We are going to use the original vector elt for storing.
    // Accumulated smaller vector elements must be a multiple of the store size.
    if (0 != (NumElems * FromSz) % ToSz) return SDValue();

    unsigned SizeRatio  = FromSz / ToSz;

    assert(SizeRatio * NumElems * ToSz == VT.getSizeInBits());

    // Create a type on which we perform the shuffle
    EVT WideVecVT = EVT::getVectorVT(*DAG.getContext(),
            StVT.getScalarType(), NumElems*SizeRatio);

    assert(WideVecVT.getSizeInBits() == VT.getSizeInBits());

    SDValue WideVec = DAG.getBitcast(WideVecVT, St->getValue());
    SmallVector<int, 8> ShuffleVec(NumElems * SizeRatio, -1);
    for (unsigned i = 0; i != NumElems; ++i)
      ShuffleVec[i] = i * SizeRatio;

    // Can't shuffle using an illegal type.
    if (!TLI.isTypeLegal(WideVecVT))
      return SDValue();

    SDValue Shuff = DAG.getVectorShuffle(WideVecVT, dl, WideVec,
                                         DAG.getUNDEF(WideVecVT),
                                         ShuffleVec);
    // At this point all of the data is stored at the bottom of the
    // register. We now need to save it to mem.

    // Find the largest store unit
    MVT StoreType = MVT::i8;
    for (MVT Tp : MVT::integer_valuetypes()) {
      if (TLI.isTypeLegal(Tp) && Tp.getSizeInBits() <= NumElems * ToSz)
        StoreType = Tp;
    }

    // On 32bit systems, we can't save 64bit integers. Try bitcasting to F64.
    if (TLI.isTypeLegal(MVT::f64) && StoreType.getSizeInBits() < 64 &&
        (64 <= NumElems * ToSz))
      StoreType = MVT::f64;

    // Bitcast the original vector into a vector of store-size units
    EVT StoreVecVT = EVT::getVectorVT(*DAG.getContext(),
            StoreType, VT.getSizeInBits()/StoreType.getSizeInBits());
    assert(StoreVecVT.getSizeInBits() == VT.getSizeInBits());
    SDValue ShuffWide = DAG.getBitcast(StoreVecVT, Shuff);
    SmallVector<SDValue, 8> Chains;
    SDValue Ptr = St->getBasePtr();

    // Perform one or more big stores into memory.
    for (unsigned i=0, e=(ToSz*NumElems)/StoreType.getSizeInBits(); i!=e; ++i) {
      SDValue SubVec = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl,
                                   StoreType, ShuffWide,
                                   DAG.getIntPtrConstant(i, dl));
      SDValue Ch =
          DAG.getStore(St->getChain(), dl, SubVec, Ptr, St->getPointerInfo(),
                       St->getAlignment(), St->getMemOperand()->getFlags());
      Ptr = DAG.getMemBasePlusOffset(Ptr, StoreType.getStoreSize(), dl);
      Chains.push_back(Ch);
    }

    return DAG.getNode(ISD::TokenFactor, dl, MVT::Other, Chains);
  }

  // Turn load->store of MMX types into GPR load/stores.  This avoids clobbering
  // the FP state in cases where an emms may be missing.
  // A preferable solution to the general problem is to figure out the right
  // places to insert EMMS.  This qualifies as a quick hack.

  // Similarly, turn load->store of i64 into double load/stores in 32-bit mode.
  if (VT.getSizeInBits() != 64)
    return SDValue();

  const Function *F = DAG.getMachineFunction().getFunction();
  bool NoImplicitFloatOps = F->hasFnAttribute(Attribute::NoImplicitFloat);
  bool F64IsLegal =
      !Subtarget.useSoftFloat() && !NoImplicitFloatOps && Subtarget.hasSSE2();
  if ((VT.isVector() ||
       (VT == MVT::i64 && F64IsLegal && !Subtarget.is64Bit())) &&
      isa<LoadSDNode>(St->getValue()) &&
      !cast<LoadSDNode>(St->getValue())->isVolatile() &&
      St->getChain().hasOneUse() && !St->isVolatile()) {
    SDNode* LdVal = St->getValue().getNode();
    LoadSDNode *Ld = nullptr;
    int TokenFactorIndex = -1;
    SmallVector<SDValue, 8> Ops;
    SDNode* ChainVal = St->getChain().getNode();
    // Must be a store of a load.  We currently handle two cases:  the load
    // is a direct child, and it's under an intervening TokenFactor.  It is
    // possible to dig deeper under nested TokenFactors.
    if (ChainVal == LdVal)
      Ld = cast<LoadSDNode>(St->getChain());
    else if (St->getValue().hasOneUse() &&
             ChainVal->getOpcode() == ISD::TokenFactor) {
      for (unsigned i = 0, e = ChainVal->getNumOperands(); i != e; ++i) {
        if (ChainVal->getOperand(i).getNode() == LdVal) {
          TokenFactorIndex = i;
          Ld = cast<LoadSDNode>(St->getValue());
        } else
          Ops.push_back(ChainVal->getOperand(i));
      }
    }

    if (!Ld || !ISD::isNormalLoad(Ld))
      return SDValue();

    // If this is not the MMX case, i.e. we are just turning i64 load/store
    // into f64 load/store, avoid the transformation if there are multiple
    // uses of the loaded value.
    if (!VT.isVector() && !Ld->hasNUsesOfValue(1, 0))
      return SDValue();

    SDLoc LdDL(Ld);
    SDLoc StDL(N);
    // If we are a 64-bit capable x86, lower to a single movq load/store pair.
    // Otherwise, if it's legal to use f64 SSE instructions, use f64 load/store
    // pair instead.
    if (Subtarget.is64Bit() || F64IsLegal) {
      MVT LdVT = Subtarget.is64Bit() ? MVT::i64 : MVT::f64;
      SDValue NewLd = DAG.getLoad(LdVT, LdDL, Ld->getChain(), Ld->getBasePtr(),
                                  Ld->getPointerInfo(), Ld->getAlignment(),
                                  Ld->getMemOperand()->getFlags());
      // Make sure new load is placed in same chain order.
      SDValue NewChain = DAG.makeEquivalentMemoryOrdering(Ld, NewLd);
      if (TokenFactorIndex >= 0) {
        Ops.push_back(NewChain);
        NewChain = DAG.getNode(ISD::TokenFactor, LdDL, MVT::Other, Ops);
      }
      return DAG.getStore(NewChain, StDL, NewLd, St->getBasePtr(),
                          St->getPointerInfo(), St->getAlignment(),
                          St->getMemOperand()->getFlags());
    }

    // Otherwise, lower to two pairs of 32-bit loads / stores.
    SDValue LoAddr = Ld->getBasePtr();
    SDValue HiAddr = DAG.getMemBasePlusOffset(LoAddr, 4, LdDL);

    SDValue LoLd = DAG.getLoad(MVT::i32, LdDL, Ld->getChain(), LoAddr,
                               Ld->getPointerInfo(), Ld->getAlignment(),
                               Ld->getMemOperand()->getFlags());
    SDValue HiLd = DAG.getLoad(MVT::i32, LdDL, Ld->getChain(), HiAddr,
                               Ld->getPointerInfo().getWithOffset(4),
                               MinAlign(Ld->getAlignment(), 4),
                               Ld->getMemOperand()->getFlags());
    // Make sure new loads are placed in same chain order.
    SDValue NewChain = DAG.makeEquivalentMemoryOrdering(Ld, LoLd);
    NewChain = DAG.makeEquivalentMemoryOrdering(Ld, HiLd);

    if (TokenFactorIndex >= 0) {
      Ops.push_back(NewChain);
      NewChain = DAG.getNode(ISD::TokenFactor, LdDL, MVT::Other, Ops);
    }

    LoAddr = St->getBasePtr();
    HiAddr = DAG.getMemBasePlusOffset(LoAddr, 4, StDL);

    SDValue LoSt =
        DAG.getStore(NewChain, StDL, LoLd, LoAddr, St->getPointerInfo(),
                     St->getAlignment(), St->getMemOperand()->getFlags());
    SDValue HiSt = DAG.getStore(
        NewChain, StDL, HiLd, HiAddr, St->getPointerInfo().getWithOffset(4),
        MinAlign(St->getAlignment(), 4), St->getMemOperand()->getFlags());
    return DAG.getNode(ISD::TokenFactor, StDL, MVT::Other, LoSt, HiSt);
  }

  // This is similar to the above case, but here we handle a scalar 64-bit
  // integer store that is extracted from a vector on a 32-bit target.
  // If we have SSE2, then we can treat it like a floating-point double
  // to get past legalization. The execution dependencies fixup pass will
  // choose the optimal machine instruction for the store if this really is
  // an integer or v2f32 rather than an f64.
  if (VT == MVT::i64 && F64IsLegal && !Subtarget.is64Bit() &&
      St->getOperand(1).getOpcode() == ISD::EXTRACT_VECTOR_ELT) {
    SDValue OldExtract = St->getOperand(1);
    SDValue ExtOp0 = OldExtract.getOperand(0);
    unsigned VecSize = ExtOp0.getValueSizeInBits();
    EVT VecVT = EVT::getVectorVT(*DAG.getContext(), MVT::f64, VecSize / 64);
    SDValue BitCast = DAG.getBitcast(VecVT, ExtOp0);
    SDValue NewExtract = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, MVT::f64,
                                     BitCast, OldExtract.getOperand(1));
    return DAG.getStore(St->getChain(), dl, NewExtract, St->getBasePtr(),
                        St->getPointerInfo(), St->getAlignment(),
                        St->getMemOperand()->getFlags());
  }

  return SDValue();
}

/// Return 'true' if this vector operation is "horizontal"
/// and return the operands for the horizontal operation in LHS and RHS.  A
/// horizontal operation performs the binary operation on successive elements
/// of its first operand, then on successive elements of its second operand,
/// returning the resulting values in a vector.  For example, if
///   A = < float a0, float a1, float a2, float a3 >
/// and
///   B = < float b0, float b1, float b2, float b3 >
/// then the result of doing a horizontal operation on A and B is
///   A horizontal-op B = < a0 op a1, a2 op a3, b0 op b1, b2 op b3 >.
/// In short, LHS and RHS are inspected to see if LHS op RHS is of the form
/// A horizontal-op B, for some already available A and B, and if so then LHS is
/// set to A, RHS to B, and the routine returns 'true'.
/// Note that the binary operation should have the property that if one of the
/// operands is UNDEF then the result is UNDEF.
static bool isHorizontalBinOp(SDValue &LHS, SDValue &RHS, bool IsCommutative) {
  // Look for the following pattern: if
  //   A = < float a0, float a1, float a2, float a3 >
  //   B = < float b0, float b1, float b2, float b3 >
  // and
  //   LHS = VECTOR_SHUFFLE A, B, <0, 2, 4, 6>
  //   RHS = VECTOR_SHUFFLE A, B, <1, 3, 5, 7>
  // then LHS op RHS = < a0 op a1, a2 op a3, b0 op b1, b2 op b3 >
  // which is A horizontal-op B.

  // At least one of the operands should be a vector shuffle.
  if (LHS.getOpcode() != ISD::VECTOR_SHUFFLE &&
      RHS.getOpcode() != ISD::VECTOR_SHUFFLE)
    return false;

  MVT VT = LHS.getSimpleValueType();

  assert((VT.is128BitVector() || VT.is256BitVector()) &&
         "Unsupported vector type for horizontal add/sub");

  // Handle 128 and 256-bit vector lengths. AVX defines horizontal add/sub to
  // operate independently on 128-bit lanes.
  unsigned NumElts = VT.getVectorNumElements();
  unsigned NumLanes = VT.getSizeInBits()/128;
  unsigned NumLaneElts = NumElts / NumLanes;
  assert((NumLaneElts % 2 == 0) &&
         "Vector type should have an even number of elements in each lane");
  unsigned HalfLaneElts = NumLaneElts/2;

  // View LHS in the form
  //   LHS = VECTOR_SHUFFLE A, B, LMask
  // If LHS is not a shuffle then pretend it is the shuffle
  //   LHS = VECTOR_SHUFFLE LHS, undef, <0, 1, ..., N-1>
  // NOTE: in what follows a default initialized SDValue represents an UNDEF of
  // type VT.
  SDValue A, B;
  SmallVector<int, 16> LMask(NumElts);
  if (LHS.getOpcode() == ISD::VECTOR_SHUFFLE) {
    if (!LHS.getOperand(0).isUndef())
      A = LHS.getOperand(0);
    if (!LHS.getOperand(1).isUndef())
      B = LHS.getOperand(1);
    ArrayRef<int> Mask = cast<ShuffleVectorSDNode>(LHS.getNode())->getMask();
    std::copy(Mask.begin(), Mask.end(), LMask.begin());
  } else {
    if (!LHS.isUndef())
      A = LHS;
    for (unsigned i = 0; i != NumElts; ++i)
      LMask[i] = i;
  }

  // Likewise, view RHS in the form
  //   RHS = VECTOR_SHUFFLE C, D, RMask
  SDValue C, D;
  SmallVector<int, 16> RMask(NumElts);
  if (RHS.getOpcode() == ISD::VECTOR_SHUFFLE) {
    if (!RHS.getOperand(0).isUndef())
      C = RHS.getOperand(0);
    if (!RHS.getOperand(1).isUndef())
      D = RHS.getOperand(1);
    ArrayRef<int> Mask = cast<ShuffleVectorSDNode>(RHS.getNode())->getMask();
    std::copy(Mask.begin(), Mask.end(), RMask.begin());
  } else {
    if (!RHS.isUndef())
      C = RHS;
    for (unsigned i = 0; i != NumElts; ++i)
      RMask[i] = i;
  }

  // Check that the shuffles are both shuffling the same vectors.
  if (!(A == C && B == D) && !(A == D && B == C))
    return false;

  // If everything is UNDEF then bail out: it would be better to fold to UNDEF.
  if (!A.getNode() && !B.getNode())
    return false;

  // If A and B occur in reverse order in RHS, then "swap" them (which means
  // rewriting the mask).
  if (A != C)
    ShuffleVectorSDNode::commuteMask(RMask);

  // At this point LHS and RHS are equivalent to
  //   LHS = VECTOR_SHUFFLE A, B, LMask
  //   RHS = VECTOR_SHUFFLE A, B, RMask
  // Check that the masks correspond to performing a horizontal operation.
  for (unsigned l = 0; l != NumElts; l += NumLaneElts) {
    for (unsigned i = 0; i != NumLaneElts; ++i) {
      int LIdx = LMask[i+l], RIdx = RMask[i+l];

      // Ignore any UNDEF components.
      if (LIdx < 0 || RIdx < 0 ||
          (!A.getNode() && (LIdx < (int)NumElts || RIdx < (int)NumElts)) ||
          (!B.getNode() && (LIdx >= (int)NumElts || RIdx >= (int)NumElts)))
        continue;

      // Check that successive elements are being operated on.  If not, this is
      // not a horizontal operation.
      unsigned Src = (i/HalfLaneElts); // each lane is split between srcs
      int Index = 2*(i%HalfLaneElts) + NumElts*Src + l;
      if (!(LIdx == Index && RIdx == Index + 1) &&
          !(IsCommutative && LIdx == Index + 1 && RIdx == Index))
        return false;
    }
  }

  LHS = A.getNode() ? A : B; // If A is 'UNDEF', use B for it.
  RHS = B.getNode() ? B : A; // If B is 'UNDEF', use A for it.
  return true;
}

/// Do target-specific dag combines on floating-point adds/subs.
static SDValue combineFaddFsub(SDNode *N, SelectionDAG &DAG,
                               const X86Subtarget &Subtarget) {
  EVT VT = N->getValueType(0);
  SDValue LHS = N->getOperand(0);
  SDValue RHS = N->getOperand(1);
  bool IsFadd = N->getOpcode() == ISD::FADD;
  assert((IsFadd || N->getOpcode() == ISD::FSUB) && "Wrong opcode");

  // Try to synthesize horizontal add/sub from adds/subs of shuffles.
  if (((Subtarget.hasSSE3() && (VT == MVT::v4f32 || VT == MVT::v2f64)) ||
       (Subtarget.hasFp256() && (VT == MVT::v8f32 || VT == MVT::v4f64))) &&
      isHorizontalBinOp(LHS, RHS, IsFadd)) {
    auto NewOpcode = IsFadd ? X86ISD::FHADD : X86ISD::FHSUB;
    return DAG.getNode(NewOpcode, SDLoc(N), VT, LHS, RHS);
  }
  return SDValue();
}

/// Attempt to pre-truncate inputs to arithmetic ops if it will simplify
/// the codegen.
/// e.g. TRUNC( BINOP( X, Y ) ) --> BINOP( TRUNC( X ), TRUNC( Y ) )
static SDValue combineTruncatedArithmetic(SDNode *N, SelectionDAG &DAG,
                                          const X86Subtarget &Subtarget,
                                          SDLoc &DL) {
  assert(N->getOpcode() == ISD::TRUNCATE && "Wrong opcode");
  SDValue Src = N->getOperand(0);
  unsigned Opcode = Src.getOpcode();
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();

  EVT VT = N->getValueType(0);
  EVT SrcVT = Src.getValueType();

  auto IsRepeatedOpOrFreeTruncation = [VT](SDValue Op0, SDValue Op1) {
    unsigned TruncSizeInBits = VT.getScalarSizeInBits();

    // Repeated operand, so we are only trading one output truncation for
    // one input truncation.
    if (Op0 == Op1)
      return true;

    // See if either operand has been extended from a smaller/equal size to
    // the truncation size, allowing a truncation to combine with the extend.
    unsigned Opcode0 = Op0.getOpcode();
    if ((Opcode0 == ISD::ANY_EXTEND || Opcode0 == ISD::SIGN_EXTEND ||
         Opcode0 == ISD::ZERO_EXTEND) &&
        Op0.getOperand(0).getScalarValueSizeInBits() <= TruncSizeInBits)
      return true;

    unsigned Opcode1 = Op1.getOpcode();
    if ((Opcode1 == ISD::ANY_EXTEND || Opcode1 == ISD::SIGN_EXTEND ||
         Opcode1 == ISD::ZERO_EXTEND) &&
        Op1.getOperand(0).getScalarValueSizeInBits() <= TruncSizeInBits)
      return true;

    // See if either operand is a single use constant which can be constant
    // folded.
    SDValue BC0 = peekThroughOneUseBitcasts(Op0);
    SDValue BC1 = peekThroughOneUseBitcasts(Op1);
    return ISD::isBuildVectorOfConstantSDNodes(BC0.getNode()) ||
           ISD::isBuildVectorOfConstantSDNodes(BC1.getNode());
  };

  auto TruncateArithmetic = [&](SDValue N0, SDValue N1) {
    SDValue Trunc0 = DAG.getNode(ISD::TRUNCATE, DL, VT, N0);
    SDValue Trunc1 = DAG.getNode(ISD::TRUNCATE, DL, VT, N1);
    return DAG.getNode(Opcode, DL, VT, Trunc0, Trunc1);
  };

  // Don't combine if the operation has other uses.
  if (!N->isOnlyUserOf(Src.getNode()))
    return SDValue();

  // Only support vector truncation for now.
  // TODO: i64 scalar math would benefit as well.
  if (!VT.isVector())
    return SDValue();

  // In most cases its only worth pre-truncating if we're only facing the cost
  // of one truncation.
  // i.e. if one of the inputs will constant fold or the input is repeated.
  switch (Opcode) {
  case ISD::AND:
  case ISD::XOR:
  case ISD::OR: {
    SDValue Op0 = Src.getOperand(0);
    SDValue Op1 = Src.getOperand(1);
    if (TLI.isOperationLegalOrPromote(Opcode, VT) &&
        IsRepeatedOpOrFreeTruncation(Op0, Op1))
      return TruncateArithmetic(Op0, Op1);
    break;
  }

  case ISD::MUL:
    // X86 is rubbish at scalar and vector i64 multiplies (until AVX512DQ) - its
    // better to truncate if we have the chance.
    if (SrcVT.getScalarType() == MVT::i64 && TLI.isOperationLegal(Opcode, VT) &&
        !TLI.isOperationLegal(Opcode, SrcVT))
      return TruncateArithmetic(Src.getOperand(0), Src.getOperand(1));
    LLVM_FALLTHROUGH;
  case ISD::ADD: {
    SDValue Op0 = Src.getOperand(0);
    SDValue Op1 = Src.getOperand(1);
    if (TLI.isOperationLegal(Opcode, VT) &&
        IsRepeatedOpOrFreeTruncation(Op0, Op1))
      return TruncateArithmetic(Op0, Op1);
    break;
  }
  }

  return SDValue();
}

/// Truncate a group of v4i32 into v16i8/v8i16 using X86ISD::PACKUS.
static SDValue
combineVectorTruncationWithPACKUS(SDNode *N, SelectionDAG &DAG,
                                  SmallVector<SDValue, 8> &Regs) {
  assert(Regs.size() > 0 && (Regs[0].getValueType() == MVT::v4i32 ||
                             Regs[0].getValueType() == MVT::v2i64));
  EVT OutVT = N->getValueType(0);
  EVT OutSVT = OutVT.getVectorElementType();
  EVT InVT = Regs[0].getValueType();
  EVT InSVT = InVT.getVectorElementType();
  SDLoc DL(N);

  // First, use mask to unset all bits that won't appear in the result.
  assert((OutSVT == MVT::i8 || OutSVT == MVT::i16) &&
         "OutSVT can only be either i8 or i16.");
  APInt Mask =
      APInt::getLowBitsSet(InSVT.getSizeInBits(), OutSVT.getSizeInBits());
  SDValue MaskVal = DAG.getConstant(Mask, DL, InVT);
  for (auto &Reg : Regs)
    Reg = DAG.getNode(ISD::AND, DL, InVT, MaskVal, Reg);

  MVT UnpackedVT, PackedVT;
  if (OutSVT == MVT::i8) {
    UnpackedVT = MVT::v8i16;
    PackedVT = MVT::v16i8;
  } else {
    UnpackedVT = MVT::v4i32;
    PackedVT = MVT::v8i16;
  }

  // In each iteration, truncate the type by a half size.
  auto RegNum = Regs.size();
  for (unsigned j = 1, e = InSVT.getSizeInBits() / OutSVT.getSizeInBits();
       j < e; j *= 2, RegNum /= 2) {
    for (unsigned i = 0; i < RegNum; i++)
      Regs[i] = DAG.getBitcast(UnpackedVT, Regs[i]);
    for (unsigned i = 0; i < RegNum / 2; i++)
      Regs[i] = DAG.getNode(X86ISD::PACKUS, DL, PackedVT, Regs[i * 2],
                            Regs[i * 2 + 1]);
  }

  // If the type of the result is v8i8, we need do one more X86ISD::PACKUS, and
  // then extract a subvector as the result since v8i8 is not a legal type.
  if (OutVT == MVT::v8i8) {
    Regs[0] = DAG.getNode(X86ISD::PACKUS, DL, PackedVT, Regs[0], Regs[0]);
    Regs[0] = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, OutVT, Regs[0],
                          DAG.getIntPtrConstant(0, DL));
    return Regs[0];
  } else if (RegNum > 1) {
    Regs.resize(RegNum);
    return DAG.getNode(ISD::CONCAT_VECTORS, DL, OutVT, Regs);
  } else
    return Regs[0];
}

/// Truncate a group of v4i32 into v8i16 using X86ISD::PACKSS.
static SDValue
combineVectorTruncationWithPACKSS(SDNode *N, const X86Subtarget &Subtarget,
                                  SelectionDAG &DAG,
                                  SmallVector<SDValue, 8> &Regs) {
  assert(Regs.size() > 0 && Regs[0].getValueType() == MVT::v4i32);
  EVT OutVT = N->getValueType(0);
  SDLoc DL(N);

  // Shift left by 16 bits, then arithmetic-shift right by 16 bits.
  SDValue ShAmt = DAG.getConstant(16, DL, MVT::i32);
  for (auto &Reg : Regs) {
    Reg = getTargetVShiftNode(X86ISD::VSHLI, DL, MVT::v4i32, Reg, ShAmt,
                              Subtarget, DAG);
    Reg = getTargetVShiftNode(X86ISD::VSRAI, DL, MVT::v4i32, Reg, ShAmt,
                              Subtarget, DAG);
  }

  for (unsigned i = 0, e = Regs.size() / 2; i < e; i++)
    Regs[i] = DAG.getNode(X86ISD::PACKSS, DL, MVT::v8i16, Regs[i * 2],
                          Regs[i * 2 + 1]);

  if (Regs.size() > 2) {
    Regs.resize(Regs.size() / 2);
    return DAG.getNode(ISD::CONCAT_VECTORS, DL, OutVT, Regs);
  } else
    return Regs[0];
}

/// This function transforms truncation from vXi32/vXi64 to vXi8/vXi16 into
/// X86ISD::PACKUS/X86ISD::PACKSS operations. We do it here because after type
/// legalization the truncation will be translated into a BUILD_VECTOR with each
/// element that is extracted from a vector and then truncated, and it is
/// difficult to do this optimization based on them.
static SDValue combineVectorTruncation(SDNode *N, SelectionDAG &DAG,
                                       const X86Subtarget &Subtarget) {
  EVT OutVT = N->getValueType(0);
  if (!OutVT.isVector())
    return SDValue();

  SDValue In = N->getOperand(0);
  if (!In.getValueType().isSimple())
    return SDValue();

  EVT InVT = In.getValueType();
  unsigned NumElems = OutVT.getVectorNumElements();

  // TODO: On AVX2, the behavior of X86ISD::PACKUS is different from that on
  // SSE2, and we need to take care of it specially.
  // AVX512 provides vpmovdb.
  if (!Subtarget.hasSSE2() || Subtarget.hasAVX2())
    return SDValue();

  EVT OutSVT = OutVT.getVectorElementType();
  EVT InSVT = InVT.getVectorElementType();
  if (!((InSVT == MVT::i32 || InSVT == MVT::i64) &&
        (OutSVT == MVT::i8 || OutSVT == MVT::i16) && isPowerOf2_32(NumElems) &&
        NumElems >= 8))
    return SDValue();

  // SSSE3's pshufb results in less instructions in the cases below.
  if (Subtarget.hasSSSE3() && NumElems == 8 &&
      ((OutSVT == MVT::i8 && InSVT != MVT::i64) ||
       (InSVT == MVT::i32 && OutSVT == MVT::i16)))
    return SDValue();

  SDLoc DL(N);

  // Split a long vector into vectors of legal type.
  unsigned RegNum = InVT.getSizeInBits() / 128;
  SmallVector<SDValue, 8> SubVec(RegNum);
  unsigned NumSubRegElts = 128 / InSVT.getSizeInBits();
  EVT SubRegVT = EVT::getVectorVT(*DAG.getContext(), InSVT, NumSubRegElts);

  for (unsigned i = 0; i < RegNum; i++)
    SubVec[i] = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, SubRegVT, In,
                            DAG.getIntPtrConstant(i * NumSubRegElts, DL));

  // SSE2 provides PACKUS for only 2 x v8i16 -> v16i8 and SSE4.1 provides PACKUS
  // for 2 x v4i32 -> v8i16. For SSSE3 and below, we need to use PACKSS to
  // truncate 2 x v4i32 to v8i16.
  if (Subtarget.hasSSE41() || OutSVT == MVT::i8)
    return combineVectorTruncationWithPACKUS(N, DAG, SubVec);
  else if (InSVT == MVT::i32)
    return combineVectorTruncationWithPACKSS(N, Subtarget, DAG, SubVec);
  else
    return SDValue();
}

/// This function transforms vector truncation of 'extended sign-bits' or
/// 'extended zero-bits' values.
/// vXi16/vXi32/vXi64 to vXi8/vXi16/vXi32 into X86ISD::PACKSS/PACKUS operations.
static SDValue combineVectorSignBitsTruncation(SDNode *N, SDLoc &DL,
                                               SelectionDAG &DAG,
                                               const X86Subtarget &Subtarget) {
  // Requires SSE2 but AVX512 has fast truncate.
  if (!Subtarget.hasSSE2() || Subtarget.hasAVX512())
    return SDValue();

  if (!N->getValueType(0).isVector() || !N->getValueType(0).isSimple())
    return SDValue();

  SDValue In = N->getOperand(0);
  if (!In.getValueType().isSimple())
    return SDValue();

  MVT VT = N->getValueType(0).getSimpleVT();
  MVT SVT = VT.getScalarType();

  MVT InVT = In.getValueType().getSimpleVT();
  MVT InSVT = InVT.getScalarType();

  // Check we have a truncation suited for PACKSS.
  if (!VT.is128BitVector() && !VT.is256BitVector())
    return SDValue();
  if (SVT != MVT::i8 && SVT != MVT::i16 && SVT != MVT::i32)
    return SDValue();
  if (InSVT != MVT::i16 && InSVT != MVT::i32 && InSVT != MVT::i64)
    return SDValue();

  // Use PACKSS if the input has sign-bits that extend all the way to the
  // packed/truncated value. e.g. Comparison result, sext_in_reg, etc.
  unsigned NumSignBits = DAG.ComputeNumSignBits(In);
  unsigned NumPackedBits = std::min<unsigned>(SVT.getSizeInBits(), 16);
  if (NumSignBits > (InSVT.getSizeInBits() - NumPackedBits))
    return truncateVectorWithPACK(X86ISD::PACKSS, VT, In, DL, DAG, Subtarget);

  // Use PACKUS if the input has zero-bits that extend all the way to the
  // packed/truncated value. e.g. masks, zext_in_reg, etc.
  KnownBits Known;
  DAG.computeKnownBits(In, Known);
  unsigned NumLeadingZeroBits = Known.countMinLeadingZeros();
  NumPackedBits = Subtarget.hasSSE41() ? NumPackedBits : 8;
  if (NumLeadingZeroBits >= (InSVT.getSizeInBits() - NumPackedBits))
    return truncateVectorWithPACK(X86ISD::PACKUS, VT, In, DL, DAG, Subtarget);

  return SDValue();
}

static SDValue combineTruncate(SDNode *N, SelectionDAG &DAG,
                               const X86Subtarget &Subtarget) {
  EVT VT = N->getValueType(0);
  SDValue Src = N->getOperand(0);
  SDLoc DL(N);

  // Attempt to pre-truncate inputs to arithmetic ops instead.
  if (SDValue V = combineTruncatedArithmetic(N, DAG, Subtarget, DL))
    return V;

  // Try to detect AVG pattern first.
  if (SDValue Avg = detectAVGPattern(Src, VT, DAG, Subtarget, DL))
    return Avg;

  // Try to combine truncation with unsigned saturation.
  if (SDValue Val = combineTruncateWithUSat(Src, VT, DL, DAG, Subtarget))
    return Val;

  // The bitcast source is a direct mmx result.
  // Detect bitcasts between i32 to x86mmx
  if (Src.getOpcode() == ISD::BITCAST && VT == MVT::i32) {
    SDValue BCSrc = Src.getOperand(0);
    if (BCSrc.getValueType() == MVT::x86mmx)
      return DAG.getNode(X86ISD::MMX_MOVD2W, DL, MVT::i32, BCSrc);
  }

  // Try to truncate extended sign/zero bits with PACKSS/PACKUS.
  if (SDValue V = combineVectorSignBitsTruncation(N, DL, DAG, Subtarget))
    return V;

  return combineVectorTruncation(N, DAG, Subtarget);
}

/// Returns the negated value if the node \p N flips sign of FP value.
///
/// FP-negation node may have different forms: FNEG(x) or FXOR (x, 0x80000000).
/// AVX512F does not have FXOR, so FNEG is lowered as
/// (bitcast (xor (bitcast x), (bitcast ConstantFP(0x80000000)))).
/// In this case we go though all bitcasts.
static SDValue isFNEG(SDNode *N) {
  if (N->getOpcode() == ISD::FNEG)
    return N->getOperand(0);

  SDValue Op = peekThroughBitcasts(SDValue(N, 0));
  if (Op.getOpcode() != X86ISD::FXOR && Op.getOpcode() != ISD::XOR)
    return SDValue();

  SDValue Op1 = peekThroughBitcasts(Op.getOperand(1));
  if (!Op1.getValueType().isFloatingPoint())
    return SDValue();

  SDValue Op0 = peekThroughBitcasts(Op.getOperand(0));

  unsigned EltBits = Op1.getScalarValueSizeInBits();
  auto isSignMask = [&](const ConstantFP *C) {
    return C->getValueAPF().bitcastToAPInt() == APInt::getSignMask(EltBits);
  };

  // There is more than one way to represent the same constant on
  // the different X86 targets. The type of the node may also depend on size.
  //  - load scalar value and broadcast
  //  - BUILD_VECTOR node
  //  - load from a constant pool.
  // We check all variants here.
  if (Op1.getOpcode() == X86ISD::VBROADCAST) {
    if (auto *C = getTargetConstantFromNode(Op1.getOperand(0)))
      if (isSignMask(cast<ConstantFP>(C)))
        return Op0;

  } else if (BuildVectorSDNode *BV = dyn_cast<BuildVectorSDNode>(Op1)) {
    if (ConstantFPSDNode *CN = BV->getConstantFPSplatNode())
      if (isSignMask(CN->getConstantFPValue()))
        return Op0;

  } else if (auto *C = getTargetConstantFromNode(Op1)) {
    if (C->getType()->isVectorTy()) {
      if (auto *SplatV = C->getSplatValue())
        if (isSignMask(cast<ConstantFP>(SplatV)))
          return Op0;
    } else if (auto *FPConst = dyn_cast<ConstantFP>(C))
      if (isSignMask(FPConst))
        return Op0;
  }
  return SDValue();
}

/// Do target-specific dag combines on floating point negations.
static SDValue combineFneg(SDNode *N, SelectionDAG &DAG,
                           const X86Subtarget &Subtarget) {
  EVT OrigVT = N->getValueType(0);
  SDValue Arg = isFNEG(N);
  assert(Arg.getNode() && "N is expected to be an FNEG node");

  EVT VT = Arg.getValueType();
  EVT SVT = VT.getScalarType();
  SDLoc DL(N);

  // Let legalize expand this if it isn't a legal type yet.
  if (!DAG.getTargetLoweringInfo().isTypeLegal(VT))
    return SDValue();

  // If we're negating a FMUL node on a target with FMA, then we can avoid the
  // use of a constant by performing (-0 - A*B) instead.
  // FIXME: Check rounding control flags as well once it becomes available.
  if (Arg.getOpcode() == ISD::FMUL && (SVT == MVT::f32 || SVT == MVT::f64) &&
      Arg->getFlags().hasNoSignedZeros() && Subtarget.hasAnyFMA()) {
    SDValue Zero = DAG.getConstantFP(0.0, DL, VT);
    SDValue NewNode = DAG.getNode(X86ISD::FNMSUB, DL, VT, Arg.getOperand(0),
                                  Arg.getOperand(1), Zero);
    return DAG.getBitcast(OrigVT, NewNode);
  }

  // If we're negating an FMA node, then we can adjust the
  // instruction to include the extra negation.
  unsigned NewOpcode = 0;
  if (Arg.hasOneUse()) {
    switch (Arg.getOpcode()) {
    case ISD::FMA:             NewOpcode = X86ISD::FNMSUB;       break;
    case X86ISD::FMSUB:        NewOpcode = X86ISD::FNMADD;       break;
    case X86ISD::FNMADD:       NewOpcode = X86ISD::FMSUB;        break;
    case X86ISD::FNMSUB:       NewOpcode = ISD::FMA;             break;
    case X86ISD::FMADD_RND:    NewOpcode = X86ISD::FNMSUB_RND;   break;
    case X86ISD::FMSUB_RND:    NewOpcode = X86ISD::FNMADD_RND;   break;
    case X86ISD::FNMADD_RND:   NewOpcode = X86ISD::FMSUB_RND;    break;
    case X86ISD::FNMSUB_RND:   NewOpcode = X86ISD::FMADD_RND;    break;
    // We can't handle scalar intrinsic node here because it would only
    // invert one element and not the whole vector. But we could try to handle
    // a negation of the lower element only.
    }
  }
  if (NewOpcode)
    return DAG.getBitcast(OrigVT, DAG.getNode(NewOpcode, DL, VT,
                                              Arg.getNode()->ops()));

  return SDValue();
}

static SDValue lowerX86FPLogicOp(SDNode *N, SelectionDAG &DAG,
                                 const X86Subtarget &Subtarget) {
  MVT VT = N->getSimpleValueType(0);
  // If we have integer vector types available, use the integer opcodes.
  if (VT.isVector() && Subtarget.hasSSE2()) {
    SDLoc dl(N);

    MVT IntVT = MVT::getVectorVT(MVT::i64, VT.getSizeInBits() / 64);

    SDValue Op0 = DAG.getBitcast(IntVT, N->getOperand(0));
    SDValue Op1 = DAG.getBitcast(IntVT, N->getOperand(1));
    unsigned IntOpcode;
    switch (N->getOpcode()) {
    default: llvm_unreachable("Unexpected FP logic op");
    case X86ISD::FOR: IntOpcode = ISD::OR; break;
    case X86ISD::FXOR: IntOpcode = ISD::XOR; break;
    case X86ISD::FAND: IntOpcode = ISD::AND; break;
    case X86ISD::FANDN: IntOpcode = X86ISD::ANDNP; break;
    }
    SDValue IntOp = DAG.getNode(IntOpcode, dl, IntVT, Op0, Op1);
    return DAG.getBitcast(VT, IntOp);
  }
  return SDValue();
}


/// Fold a xor(setcc cond, val), 1 --> setcc (inverted(cond), val)
static SDValue foldXor1SetCC(SDNode *N, SelectionDAG &DAG) {
  if (N->getOpcode() != ISD::XOR)
    return SDValue();

  SDValue LHS = N->getOperand(0);
  auto *RHSC = dyn_cast<ConstantSDNode>(N->getOperand(1));
  if (!RHSC || RHSC->getZExtValue() != 1 || LHS->getOpcode() != X86ISD::SETCC)
    return SDValue();

  X86::CondCode NewCC = X86::GetOppositeBranchCondition(
      X86::CondCode(LHS->getConstantOperandVal(0)));
  SDLoc DL(N);
  return getSETCC(NewCC, LHS->getOperand(1), DL, DAG);
}

static SDValue combineXor(SDNode *N, SelectionDAG &DAG,
                          TargetLowering::DAGCombinerInfo &DCI,
                          const X86Subtarget &Subtarget) {
  if (SDValue Cmp = foldVectorXorShiftIntoCmp(N, DAG, Subtarget))
    return Cmp;

  if (DCI.isBeforeLegalizeOps())
    return SDValue();

  if (SDValue SetCC = foldXor1SetCC(N, DAG))
    return SetCC;

  if (SDValue RV = foldXorTruncShiftIntoCmp(N, DAG))
    return RV;

  if (SDValue FPLogic = convertIntLogicToFPLogic(N, DAG, Subtarget))
    return FPLogic;

  if (isFNEG(N))
    return combineFneg(N, DAG, Subtarget);
  return SDValue();
}


static bool isNullFPScalarOrVectorConst(SDValue V) {
  return isNullFPConstant(V) || ISD::isBuildVectorAllZeros(V.getNode());
}

/// If a value is a scalar FP zero or a vector FP zero (potentially including
/// undefined elements), return a zero constant that may be used to fold away
/// that value. In the case of a vector, the returned constant will not contain
/// undefined elements even if the input parameter does. This makes it suitable
/// to be used as a replacement operand with operations (eg, bitwise-and) where
/// an undef should not propagate.
static SDValue getNullFPConstForNullVal(SDValue V, SelectionDAG &DAG,
                                        const X86Subtarget &Subtarget) {
  if (!isNullFPScalarOrVectorConst(V))
    return SDValue();

  if (V.getValueType().isVector())
    return getZeroVector(V.getSimpleValueType(), Subtarget, DAG, SDLoc(V));

  return V;
}

static SDValue combineFAndFNotToFAndn(SDNode *N, SelectionDAG &DAG,
                                      const X86Subtarget &Subtarget) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // Vector types are handled in combineANDXORWithAllOnesIntoANDNP().
  if (!((VT == MVT::f32 && Subtarget.hasSSE1()) ||
        (VT == MVT::f64 && Subtarget.hasSSE2())))
    return SDValue();

  auto isAllOnesConstantFP = [](SDValue V) {
    auto *C = dyn_cast<ConstantFPSDNode>(V);
    return C && C->getConstantFPValue()->isAllOnesValue();
  };

  // fand (fxor X, -1), Y --> fandn X, Y
  if (N0.getOpcode() == X86ISD::FXOR && isAllOnesConstantFP(N0.getOperand(1)))
    return DAG.getNode(X86ISD::FANDN, DL, VT, N0.getOperand(0), N1);

  // fand X, (fxor Y, -1) --> fandn Y, X
  if (N1.getOpcode() == X86ISD::FXOR && isAllOnesConstantFP(N1.getOperand(1)))
    return DAG.getNode(X86ISD::FANDN, DL, VT, N1.getOperand(0), N0);

  return SDValue();
}

/// Do target-specific dag combines on X86ISD::FAND nodes.
static SDValue combineFAnd(SDNode *N, SelectionDAG &DAG,
                           const X86Subtarget &Subtarget) {
  // FAND(0.0, x) -> 0.0
  if (SDValue V = getNullFPConstForNullVal(N->getOperand(0), DAG, Subtarget))
    return V;

  // FAND(x, 0.0) -> 0.0
  if (SDValue V = getNullFPConstForNullVal(N->getOperand(1), DAG, Subtarget))
    return V;

  if (SDValue V = combineFAndFNotToFAndn(N, DAG, Subtarget))
    return V;

  return lowerX86FPLogicOp(N, DAG, Subtarget);
}

/// Do target-specific dag combines on X86ISD::FANDN nodes.
static SDValue combineFAndn(SDNode *N, SelectionDAG &DAG,
                            const X86Subtarget &Subtarget) {
  // FANDN(0.0, x) -> x
  if (isNullFPScalarOrVectorConst(N->getOperand(0)))
    return N->getOperand(1);

  // FANDN(x, 0.0) -> 0.0
  if (SDValue V = getNullFPConstForNullVal(N->getOperand(1), DAG, Subtarget))
    return V;

  return lowerX86FPLogicOp(N, DAG, Subtarget);
}

/// Do target-specific dag combines on X86ISD::FOR and X86ISD::FXOR nodes.
static SDValue combineFOr(SDNode *N, SelectionDAG &DAG,
                          const X86Subtarget &Subtarget) {
  assert(N->getOpcode() == X86ISD::FOR || N->getOpcode() == X86ISD::FXOR);

  // F[X]OR(0.0, x) -> x
  if (isNullFPScalarOrVectorConst(N->getOperand(0)))
    return N->getOperand(1);

  // F[X]OR(x, 0.0) -> x
  if (isNullFPScalarOrVectorConst(N->getOperand(1)))
    return N->getOperand(0);

  if (isFNEG(N))
    if (SDValue NewVal = combineFneg(N, DAG, Subtarget))
      return NewVal;

  return lowerX86FPLogicOp(N, DAG, Subtarget);
}

/// Do target-specific dag combines on X86ISD::FMIN and X86ISD::FMAX nodes.
static SDValue combineFMinFMax(SDNode *N, SelectionDAG &DAG) {
  assert(N->getOpcode() == X86ISD::FMIN || N->getOpcode() == X86ISD::FMAX);

  // Only perform optimizations if UnsafeMath is used.
  if (!DAG.getTarget().Options.UnsafeFPMath)
    return SDValue();

  // If we run in unsafe-math mode, then convert the FMAX and FMIN nodes
  // into FMINC and FMAXC, which are Commutative operations.
  unsigned NewOp = 0;
  switch (N->getOpcode()) {
    default: llvm_unreachable("unknown opcode");
    case X86ISD::FMIN:  NewOp = X86ISD::FMINC; break;
    case X86ISD::FMAX:  NewOp = X86ISD::FMAXC; break;
  }

  return DAG.getNode(NewOp, SDLoc(N), N->getValueType(0),
                     N->getOperand(0), N->getOperand(1));
}

static SDValue combineFMinNumFMaxNum(SDNode *N, SelectionDAG &DAG,
                                     const X86Subtarget &Subtarget) {
  if (Subtarget.useSoftFloat())
    return SDValue();

  // TODO: Check for global or instruction-level "nnan". In that case, we
  //       should be able to lower to FMAX/FMIN alone.
  // TODO: If an operand is already known to be a NaN or not a NaN, this
  //       should be an optional swap and FMAX/FMIN.

  EVT VT = N->getValueType(0);
  if (!((Subtarget.hasSSE1() && (VT == MVT::f32 || VT == MVT::v4f32)) ||
        (Subtarget.hasSSE2() && (VT == MVT::f64 || VT == MVT::v2f64)) ||
        (Subtarget.hasAVX() && (VT == MVT::v8f32 || VT == MVT::v4f64))))
    return SDValue();

  // This takes at least 3 instructions, so favor a library call when operating
  // on a scalar and minimizing code size.
  if (!VT.isVector() && DAG.getMachineFunction().getFunction()->optForMinSize())
    return SDValue();

  SDValue Op0 = N->getOperand(0);
  SDValue Op1 = N->getOperand(1);
  SDLoc DL(N);
  EVT SetCCType = DAG.getTargetLoweringInfo().getSetCCResultType(
      DAG.getDataLayout(), *DAG.getContext(), VT);

  // There are 4 possibilities involving NaN inputs, and these are the required
  // outputs:
  //                   Op1
  //               Num     NaN
  //            ----------------
  //       Num  |  Max  |  Op0 |
  // Op0        ----------------
  //       NaN  |  Op1  |  NaN |
  //            ----------------
  //
  // The SSE FP max/min instructions were not designed for this case, but rather
  // to implement:
  //   Min = Op1 < Op0 ? Op1 : Op0
  //   Max = Op1 > Op0 ? Op1 : Op0
  //
  // So they always return Op0 if either input is a NaN. However, we can still
  // use those instructions for fmaxnum by selecting away a NaN input.

  // If either operand is NaN, the 2nd source operand (Op0) is passed through.
  auto MinMaxOp = N->getOpcode() == ISD::FMAXNUM ? X86ISD::FMAX : X86ISD::FMIN;
  SDValue MinOrMax = DAG.getNode(MinMaxOp, DL, VT, Op1, Op0);
  SDValue IsOp0Nan = DAG.getSetCC(DL, SetCCType , Op0, Op0, ISD::SETUO);

  // If Op0 is a NaN, select Op1. Otherwise, select the max. If both operands
  // are NaN, the NaN value of Op1 is the result.
  return DAG.getSelect(DL, VT, IsOp0Nan, Op1, MinOrMax);
}

/// Do target-specific dag combines on X86ISD::ANDNP nodes.
static SDValue combineAndnp(SDNode *N, SelectionDAG &DAG,
                            TargetLowering::DAGCombinerInfo &DCI,
                            const X86Subtarget &Subtarget) {
  // ANDNP(0, x) -> x
  if (ISD::isBuildVectorAllZeros(N->getOperand(0).getNode()))
    return N->getOperand(1);

  // ANDNP(x, 0) -> 0
  if (ISD::isBuildVectorAllZeros(N->getOperand(1).getNode()))
    return getZeroVector(N->getSimpleValueType(0), Subtarget, DAG, SDLoc(N));

  EVT VT = N->getValueType(0);

  // Attempt to recursively combine a bitmask ANDNP with shuffles.
  if (VT.isVector() && (VT.getScalarSizeInBits() % 8) == 0) {
    SDValue Op(N, 0);
    if (SDValue Res = combineX86ShufflesRecursively(
            {Op}, 0, Op, {0}, {}, /*Depth*/ 1,
            /*HasVarMask*/ false, DAG, DCI, Subtarget)) {
      DCI.CombineTo(N, Res);
      return SDValue();
    }
  }

  return SDValue();
}

static SDValue combineBT(SDNode *N, SelectionDAG &DAG,
                         TargetLowering::DAGCombinerInfo &DCI) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);

  // BT ignores high bits in the bit index operand.
  unsigned BitWidth = N1.getValueSizeInBits();
  APInt DemandedMask = APInt::getLowBitsSet(BitWidth, Log2_32(BitWidth));
  if (SDValue DemandedN1 = DAG.GetDemandedBits(N1, DemandedMask))
    return DAG.getNode(X86ISD::BT, SDLoc(N), MVT::i32, N0, DemandedN1);

  return SDValue();
}

static SDValue combineSignExtendInReg(SDNode *N, SelectionDAG &DAG,
                                      const X86Subtarget &Subtarget) {
  EVT VT = N->getValueType(0);
  if (!VT.isVector())
    return SDValue();

  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT ExtraVT = cast<VTSDNode>(N1)->getVT();
  SDLoc dl(N);

  // The SIGN_EXTEND_INREG to v4i64 is expensive operation on the
  // both SSE and AVX2 since there is no sign-extended shift right
  // operation on a vector with 64-bit elements.
  //(sext_in_reg (v4i64 anyext (v4i32 x )), ExtraVT) ->
  // (v4i64 sext (v4i32 sext_in_reg (v4i32 x , ExtraVT)))
  if (VT == MVT::v4i64 && (N0.getOpcode() == ISD::ANY_EXTEND ||
      N0.getOpcode() == ISD::SIGN_EXTEND)) {
    SDValue N00 = N0.getOperand(0);

    // EXTLOAD has a better solution on AVX2,
    // it may be replaced with X86ISD::VSEXT node.
    if (N00.getOpcode() == ISD::LOAD && Subtarget.hasInt256())
      if (!ISD::isNormalLoad(N00.getNode()))
        return SDValue();

    if (N00.getValueType() == MVT::v4i32 && ExtraVT.getSizeInBits() < 128) {
        SDValue Tmp = DAG.getNode(ISD::SIGN_EXTEND_INREG, dl, MVT::v4i32,
                                  N00, N1);
      return DAG.getNode(ISD::SIGN_EXTEND, dl, MVT::v4i64, Tmp);
    }
  }
  return SDValue();
}

/// sext(add_nsw(x, C)) --> add(sext(x), C_sext)
/// zext(add_nuw(x, C)) --> add(zext(x), C_zext)
/// Promoting a sign/zero extension ahead of a no overflow 'add' exposes
/// opportunities to combine math ops, use an LEA, or use a complex addressing
/// mode. This can eliminate extend, add, and shift instructions.
static SDValue promoteExtBeforeAdd(SDNode *Ext, SelectionDAG &DAG,
                                   const X86Subtarget &Subtarget) {
  if (Ext->getOpcode() != ISD::SIGN_EXTEND &&
      Ext->getOpcode() != ISD::ZERO_EXTEND)
    return SDValue();

  // TODO: This should be valid for other integer types.
  EVT VT = Ext->getValueType(0);
  if (VT != MVT::i64)
    return SDValue();

  SDValue Add = Ext->getOperand(0);
  if (Add.getOpcode() != ISD::ADD)
    return SDValue();

  bool Sext = Ext->getOpcode() == ISD::SIGN_EXTEND;
  bool NSW = Add->getFlags().hasNoSignedWrap();
  bool NUW = Add->getFlags().hasNoUnsignedWrap();

  // We need an 'add nsw' feeding into the 'sext' or 'add nuw' feeding
  // into the 'zext'
  if ((Sext && !NSW) || (!Sext && !NUW))
    return SDValue();

  // Having a constant operand to the 'add' ensures that we are not increasing
  // the instruction count because the constant is extended for free below.
  // A constant operand can also become the displacement field of an LEA.
  auto *AddOp1 = dyn_cast<ConstantSDNode>(Add.getOperand(1));
  if (!AddOp1)
    return SDValue();

  // Don't make the 'add' bigger if there's no hope of combining it with some
  // other 'add' or 'shl' instruction.
  // TODO: It may be profitable to generate simpler LEA instructions in place
  // of single 'add' instructions, but the cost model for selecting an LEA
  // currently has a high threshold.
  bool HasLEAPotential = false;
  for (auto *User : Ext->uses()) {
    if (User->getOpcode() == ISD::ADD || User->getOpcode() == ISD::SHL) {
      HasLEAPotential = true;
      break;
    }
  }
  if (!HasLEAPotential)
    return SDValue();

  // Everything looks good, so pull the '{s|z}ext' ahead of the 'add'.
  int64_t AddConstant = Sext ? AddOp1->getSExtValue() : AddOp1->getZExtValue();
  SDValue AddOp0 = Add.getOperand(0);
  SDValue NewExt = DAG.getNode(Ext->getOpcode(), SDLoc(Ext), VT, AddOp0);
  SDValue NewConstant = DAG.getConstant(AddConstant, SDLoc(Add), VT);

  // The wider add is guaranteed to not wrap because both operands are
  // sign-extended.
  SDNodeFlags Flags;
  Flags.setNoSignedWrap(NSW);
  Flags.setNoUnsignedWrap(NUW);
  return DAG.getNode(ISD::ADD, SDLoc(Add), VT, NewExt, NewConstant, Flags);
}

/// (i8,i32 {s/z}ext ({s/u}divrem (i8 x, i8 y)) ->
/// (i8,i32 ({s/u}divrem_sext_hreg (i8 x, i8 y)
/// This exposes the {s/z}ext to the sdivrem lowering, so that it directly
/// extends from AH (which we otherwise need to do contortions to access).
static SDValue getDivRem8(SDNode *N, SelectionDAG &DAG) {
  SDValue N0 = N->getOperand(0);
  auto OpcodeN = N->getOpcode();
  auto OpcodeN0 = N0.getOpcode();
  if (!((OpcodeN == ISD::SIGN_EXTEND && OpcodeN0 == ISD::SDIVREM) ||
        (OpcodeN == ISD::ZERO_EXTEND && OpcodeN0 == ISD::UDIVREM)))
    return SDValue();

  EVT VT = N->getValueType(0);
  EVT InVT = N0.getValueType();
  if (N0.getResNo() != 1 || InVT != MVT::i8 ||
      !(VT == MVT::i32 || VT == MVT::i64))
    return SDValue();

  SDVTList NodeTys = DAG.getVTList(MVT::i8, MVT::i32);
  auto DivRemOpcode = OpcodeN0 == ISD::SDIVREM ? X86ISD::SDIVREM8_SEXT_HREG
                                               : X86ISD::UDIVREM8_ZEXT_HREG;
  SDValue R = DAG.getNode(DivRemOpcode, SDLoc(N), NodeTys, N0.getOperand(0),
                          N0.getOperand(1));
  DAG.ReplaceAllUsesOfValueWith(N0.getValue(0), R.getValue(0));
  // If this was a 64-bit extend, complete it.
  if (VT == MVT::i64)
    return DAG.getNode(OpcodeN, SDLoc(N), VT, R.getValue(1));
  return R.getValue(1);
}

// If we face {ANY,SIGN,ZERO}_EXTEND that is applied to a CMOV with constant
// operands and the result of CMOV is not used anywhere else - promote CMOV
// itself instead of promoting its result. This could be beneficial, because:
//     1) X86TargetLowering::EmitLoweredSelect later can do merging of two
//        (or more) pseudo-CMOVs only when they go one-after-another and
//        getting rid of result extension code after CMOV will help that.
//     2) Promotion of constant CMOV arguments is free, hence the
//        {ANY,SIGN,ZERO}_EXTEND will just be deleted.
//     3) 16-bit CMOV encoding is 4 bytes, 32-bit CMOV is 3-byte, so this
//        promotion is also good in terms of code-size.
//        (64-bit CMOV is 4-bytes, that's why we don't do 32-bit => 64-bit
//         promotion).
static SDValue combineToExtendCMOV(SDNode *Extend, SelectionDAG &DAG) {
  SDValue CMovN = Extend->getOperand(0);
  if (CMovN.getOpcode() != X86ISD::CMOV)
    return SDValue();

  EVT TargetVT = Extend->getValueType(0);
  unsigned ExtendOpcode = Extend->getOpcode();
  SDLoc DL(Extend);

  EVT VT = CMovN.getValueType();
  SDValue CMovOp0 = CMovN.getOperand(0);
  SDValue CMovOp1 = CMovN.getOperand(1);

  bool DoPromoteCMOV =
      (VT == MVT::i16 && (TargetVT == MVT::i32 || TargetVT == MVT::i64)) &&
      CMovN.hasOneUse() &&
      (isa<ConstantSDNode>(CMovOp0.getNode()) &&
       isa<ConstantSDNode>(CMovOp1.getNode()));

  if (!DoPromoteCMOV)
    return SDValue();

  CMovOp0 = DAG.getNode(ExtendOpcode, DL, TargetVT, CMovOp0);
  CMovOp1 = DAG.getNode(ExtendOpcode, DL, TargetVT, CMovOp1);

  return DAG.getNode(X86ISD::CMOV, DL, TargetVT, CMovOp0, CMovOp1,
                     CMovN.getOperand(2), CMovN.getOperand(3));
}

// Convert (vXiY *ext(vXi1 bitcast(iX))) to extend_in_reg(broadcast(iX)).
// This is more or less the reverse of combineBitcastvxi1.
static SDValue
combineToExtendBoolVectorInReg(SDNode *N, SelectionDAG &DAG,
                               TargetLowering::DAGCombinerInfo &DCI,
                               const X86Subtarget &Subtarget) {
  unsigned Opcode = N->getOpcode();
  if (Opcode != ISD::SIGN_EXTEND && Opcode != ISD::ZERO_EXTEND &&
      Opcode != ISD::ANY_EXTEND)
    return SDValue();
  if (!DCI.isBeforeLegalizeOps())
    return SDValue();
  if (!Subtarget.hasSSE2() || Subtarget.hasAVX512())
    return SDValue();

  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  EVT SVT = VT.getScalarType();
  EVT InSVT = N0.getValueType().getScalarType();
  unsigned EltSizeInBits = SVT.getSizeInBits();

  // Input type must be extending a bool vector (bit-casted from a scalar
  // integer) to legal integer types.
  if (!VT.isVector())
    return SDValue();
  if (SVT != MVT::i64 && SVT != MVT::i32 && SVT != MVT::i16 && SVT != MVT::i8)
    return SDValue();
  if (InSVT != MVT::i1 || N0.getOpcode() != ISD::BITCAST)
    return SDValue();

  SDValue N00 = N0.getOperand(0);
  EVT SclVT = N0.getOperand(0).getValueType();
  if (!SclVT.isScalarInteger())
    return SDValue();

  SDLoc DL(N);
  SDValue Vec;
  SmallVector<int, 32> ShuffleMask;
  unsigned NumElts = VT.getVectorNumElements();
  assert(NumElts == SclVT.getSizeInBits() && "Unexpected bool vector size");

  // Broadcast the scalar integer to the vector elements.
  if (NumElts > EltSizeInBits) {
    // If the scalar integer is greater than the vector element size, then we
    // must split it down into sub-sections for broadcasting. For example:
    //   i16 -> v16i8 (i16 -> v8i16 -> v16i8) with 2 sub-sections.
    //   i32 -> v32i8 (i32 -> v8i32 -> v32i8) with 4 sub-sections.
    assert((NumElts % EltSizeInBits) == 0 && "Unexpected integer scale");
    unsigned Scale = NumElts / EltSizeInBits;
    EVT BroadcastVT =
        EVT::getVectorVT(*DAG.getContext(), SclVT, EltSizeInBits);
    Vec = DAG.getNode(ISD::SCALAR_TO_VECTOR, DL, BroadcastVT, N00);
    Vec = DAG.getBitcast(VT, Vec);

    for (unsigned i = 0; i != Scale; ++i)
      ShuffleMask.append(EltSizeInBits, i);
  } else {
    // For smaller scalar integers, we can simply any-extend it to the vector
    // element size (we don't care about the upper bits) and broadcast it to all
    // elements.
    SDValue Scl = DAG.getAnyExtOrTrunc(N00, DL, SVT);
    Vec = DAG.getNode(ISD::SCALAR_TO_VECTOR, DL, VT, Scl);
    ShuffleMask.append(NumElts, 0);
  }
  Vec = DAG.getVectorShuffle(VT, DL, Vec, Vec, ShuffleMask);

  // Now, mask the relevant bit in each element.
  SmallVector<SDValue, 32> Bits;
  for (unsigned i = 0; i != NumElts; ++i) {
    int BitIdx = (i % EltSizeInBits);
    APInt Bit = APInt::getBitsSet(EltSizeInBits, BitIdx, BitIdx + 1);
    Bits.push_back(DAG.getConstant(Bit, DL, SVT));
  }
  SDValue BitMask = DAG.getBuildVector(VT, DL, Bits);
  Vec = DAG.getNode(ISD::AND, DL, VT, Vec, BitMask);

  // Compare against the bitmask and extend the result.
  EVT CCVT = EVT::getVectorVT(*DAG.getContext(), MVT::i1, NumElts);
  Vec = DAG.getSetCC(DL, CCVT, Vec, BitMask, ISD::SETEQ);
  Vec = DAG.getSExtOrTrunc(Vec, DL, VT);

  // For SEXT, this is now done, otherwise shift the result down for
  // zero-extension.
  if (Opcode == ISD::SIGN_EXTEND)
    return Vec;
  return DAG.getNode(ISD::SRL, DL, VT, Vec,
                     DAG.getConstant(EltSizeInBits - 1, DL, VT));
}

/// Convert a SEXT or ZEXT of a vector to a SIGN_EXTEND_VECTOR_INREG or
/// ZERO_EXTEND_VECTOR_INREG, this requires the splitting (or concatenating
/// with UNDEFs) of the input to vectors of the same size as the target type
/// which then extends the lowest elements.
static SDValue combineToExtendVectorInReg(SDNode *N, SelectionDAG &DAG,
                                          TargetLowering::DAGCombinerInfo &DCI,
                                          const X86Subtarget &Subtarget) {
  unsigned Opcode = N->getOpcode();
  if (Opcode != ISD::SIGN_EXTEND && Opcode != ISD::ZERO_EXTEND)
    return SDValue();
  if (!DCI.isBeforeLegalizeOps())
    return SDValue();
  if (!Subtarget.hasSSE2())
    return SDValue();

  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  EVT SVT = VT.getScalarType();
  EVT InVT = N0.getValueType();
  EVT InSVT = InVT.getScalarType();

  // Input type must be a vector and we must be extending legal integer types.
  if (!VT.isVector())
    return SDValue();
  if (SVT != MVT::i64 && SVT != MVT::i32 && SVT != MVT::i16)
    return SDValue();
  if (InSVT != MVT::i32 && InSVT != MVT::i16 && InSVT != MVT::i8)
    return SDValue();

  // On AVX2+ targets, if the input/output types are both legal then we will be
  // able to use SIGN_EXTEND/ZERO_EXTEND directly.
  if (Subtarget.hasInt256() && DAG.getTargetLoweringInfo().isTypeLegal(VT) &&
      DAG.getTargetLoweringInfo().isTypeLegal(InVT))
    return SDValue();

  SDLoc DL(N);

  auto ExtendVecSize = [&DAG](const SDLoc &DL, SDValue N, unsigned Size) {
    EVT InVT = N.getValueType();
    EVT OutVT = EVT::getVectorVT(*DAG.getContext(), InVT.getScalarType(),
                                 Size / InVT.getScalarSizeInBits());
    SmallVector<SDValue, 8> Opnds(Size / InVT.getSizeInBits(),
                                  DAG.getUNDEF(InVT));
    Opnds[0] = N;
    return DAG.getNode(ISD::CONCAT_VECTORS, DL, OutVT, Opnds);
  };

  // If target-size is less than 128-bits, extend to a type that would extend
  // to 128 bits, extend that and extract the original target vector.
  if (VT.getSizeInBits() < 128 && !(128 % VT.getSizeInBits())) {
    unsigned Scale = 128 / VT.getSizeInBits();
    EVT ExVT =
        EVT::getVectorVT(*DAG.getContext(), SVT, 128 / SVT.getSizeInBits());
    SDValue Ex = ExtendVecSize(DL, N0, Scale * InVT.getSizeInBits());
    SDValue SExt = DAG.getNode(Opcode, DL, ExVT, Ex);
    return DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, VT, SExt,
                       DAG.getIntPtrConstant(0, DL));
  }

  // If target-size is 128-bits (or 256-bits on AVX2 target), then convert to
  // ISD::*_EXTEND_VECTOR_INREG which ensures lowering to X86ISD::V*EXT.
  // Also use this if we don't have SSE41 to allow the legalizer do its job.
  if (!Subtarget.hasSSE41() || VT.is128BitVector() ||
      (VT.is256BitVector() && Subtarget.hasInt256()) ||
      (VT.is512BitVector() && Subtarget.hasAVX512())) {
    SDValue ExOp = ExtendVecSize(DL, N0, VT.getSizeInBits());
    return Opcode == ISD::SIGN_EXTEND
               ? DAG.getSignExtendVectorInReg(ExOp, DL, VT)
               : DAG.getZeroExtendVectorInReg(ExOp, DL, VT);
  }

  auto SplitAndExtendInReg = [&](unsigned SplitSize) {
    unsigned NumVecs = VT.getSizeInBits() / SplitSize;
    unsigned NumSubElts = SplitSize / SVT.getSizeInBits();
    EVT SubVT = EVT::getVectorVT(*DAG.getContext(), SVT, NumSubElts);
    EVT InSubVT = EVT::getVectorVT(*DAG.getContext(), InSVT, NumSubElts);

    SmallVector<SDValue, 8> Opnds;
    for (unsigned i = 0, Offset = 0; i != NumVecs; ++i, Offset += NumSubElts) {
      SDValue SrcVec = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, InSubVT, N0,
                                   DAG.getIntPtrConstant(Offset, DL));
      SrcVec = ExtendVecSize(DL, SrcVec, SplitSize);
      SrcVec = Opcode == ISD::SIGN_EXTEND
                   ? DAG.getSignExtendVectorInReg(SrcVec, DL, SubVT)
                   : DAG.getZeroExtendVectorInReg(SrcVec, DL, SubVT);
      Opnds.push_back(SrcVec);
    }
    return DAG.getNode(ISD::CONCAT_VECTORS, DL, VT, Opnds);
  };

  // On pre-AVX2 targets, split into 128-bit nodes of
  // ISD::*_EXTEND_VECTOR_INREG.
  if (!Subtarget.hasInt256() && !(VT.getSizeInBits() % 128))
    return SplitAndExtendInReg(128);

  // On pre-AVX512 targets, split into 256-bit nodes of
  // ISD::*_EXTEND_VECTOR_INREG.
  if (!Subtarget.hasAVX512() && !(VT.getSizeInBits() % 256))
    return SplitAndExtendInReg(256);

  return SDValue();
}

static SDValue combineSext(SDNode *N, SelectionDAG &DAG,
                           TargetLowering::DAGCombinerInfo &DCI,
                           const X86Subtarget &Subtarget) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  EVT InVT = N0.getValueType();
  SDLoc DL(N);

  if (SDValue DivRem8 = getDivRem8(N, DAG))
    return DivRem8;

  if (SDValue NewCMov = combineToExtendCMOV(N, DAG))
    return NewCMov;

  if (!DCI.isBeforeLegalizeOps()) {
    if (InVT == MVT::i1) {
      SDValue Zero = DAG.getConstant(0, DL, VT);
      SDValue AllOnes = DAG.getAllOnesConstant(DL, VT);
      return DAG.getSelect(DL, VT, N0, AllOnes, Zero);
    }
    return SDValue();
  }

  if (InVT == MVT::i1 && N0.getOpcode() == ISD::XOR &&
      isAllOnesConstant(N0.getOperand(1)) && N0.hasOneUse()) {
    // Invert and sign-extend a boolean is the same as zero-extend and subtract
    // 1 because 0 becomes -1 and 1 becomes 0. The subtract is efficiently
    // lowered with an LEA or a DEC. This is the same as: select Bool, 0, -1.
    // sext (xor Bool, -1) --> sub (zext Bool), 1
    SDValue Zext = DAG.getNode(ISD::ZERO_EXTEND, DL, VT, N0.getOperand(0));
    return DAG.getNode(ISD::SUB, DL, VT, Zext, DAG.getConstant(1, DL, VT));
  }

  if (SDValue V = combineToExtendVectorInReg(N, DAG, DCI, Subtarget))
    return V;

  if (SDValue V = combineToExtendBoolVectorInReg(N, DAG, DCI, Subtarget))
    return V;

  if (Subtarget.hasAVX() && VT.is256BitVector())
    if (SDValue R = WidenMaskArithmetic(N, DAG, DCI, Subtarget))
      return R;

  if (SDValue NewAdd = promoteExtBeforeAdd(N, DAG, Subtarget))
    return NewAdd;

  return SDValue();
}

static SDValue combineFMA(SDNode *N, SelectionDAG &DAG,
                          const X86Subtarget &Subtarget) {
  SDLoc dl(N);
  EVT VT = N->getValueType(0);

  // Let legalize expand this if it isn't a legal type yet.
  if (!DAG.getTargetLoweringInfo().isTypeLegal(VT))
    return SDValue();

  EVT ScalarVT = VT.getScalarType();
  if ((ScalarVT != MVT::f32 && ScalarVT != MVT::f64) || !Subtarget.hasAnyFMA())
    return SDValue();

  SDValue A = N->getOperand(0);
  SDValue B = N->getOperand(1);
  SDValue C = N->getOperand(2);

  auto invertIfNegative = [](SDValue &V) {
    if (SDValue NegVal = isFNEG(V.getNode())) {
      V = NegVal;
      return true;
    }
    return false;
  };

  // Do not convert the passthru input of scalar intrinsics.
  // FIXME: We could allow negations of the lower element only.
  bool NegA = N->getOpcode() != X86ISD::FMADDS1 &&
              N->getOpcode() != X86ISD::FMADDS1_RND && invertIfNegative(A);
  bool NegB = invertIfNegative(B);
  bool NegC = N->getOpcode() != X86ISD::FMADDS3 &&
              N->getOpcode() != X86ISD::FMADDS3_RND && invertIfNegative(C);

  // Negative multiplication when NegA xor NegB
  bool NegMul = (NegA != NegB);
  bool HasNeg = NegA || NegB || NegC;

  unsigned NewOpcode;
  if (!NegMul)
    NewOpcode = (!NegC) ? unsigned(ISD::FMA) : unsigned(X86ISD::FMSUB);
  else
    NewOpcode = (!NegC) ? X86ISD::FNMADD : X86ISD::FNMSUB;

  // For FMA, we risk reconstructing the node we started with.
  // In order to avoid this, we check for negation or opcode change. If
  // one of the two happened, then it is a new node and we return it.
  if (N->getOpcode() == ISD::FMA) {
    if (HasNeg || NewOpcode != N->getOpcode())
      return DAG.getNode(NewOpcode, dl, VT, A, B, C);
    return SDValue();
  }

  if (N->getOpcode() == X86ISD::FMADD_RND) {
    switch (NewOpcode) {
    case ISD::FMA:       NewOpcode = X86ISD::FMADD_RND; break;
    case X86ISD::FMSUB:  NewOpcode = X86ISD::FMSUB_RND; break;
    case X86ISD::FNMADD: NewOpcode = X86ISD::FNMADD_RND; break;
    case X86ISD::FNMSUB: NewOpcode = X86ISD::FNMSUB_RND; break;
    }
  } else if (N->getOpcode() == X86ISD::FMADDS1) {
    switch (NewOpcode) {
    case ISD::FMA:       NewOpcode = X86ISD::FMADDS1; break;
    case X86ISD::FMSUB:  NewOpcode = X86ISD::FMSUBS1; break;
    case X86ISD::FNMADD: NewOpcode = X86ISD::FNMADDS1; break;
    case X86ISD::FNMSUB: NewOpcode = X86ISD::FNMSUBS1; break;
    }
  } else if (N->getOpcode() == X86ISD::FMADDS3) {
    switch (NewOpcode) {
    case ISD::FMA:       NewOpcode = X86ISD::FMADDS3; break;
    case X86ISD::FMSUB:  NewOpcode = X86ISD::FMSUBS3; break;
    case X86ISD::FNMADD: NewOpcode = X86ISD::FNMADDS3; break;
    case X86ISD::FNMSUB: NewOpcode = X86ISD::FNMSUBS3; break;
    }
  } else if (N->getOpcode() == X86ISD::FMADDS1_RND) {
    switch (NewOpcode) {
    case ISD::FMA:       NewOpcode = X86ISD::FMADDS1_RND; break;
    case X86ISD::FMSUB:  NewOpcode = X86ISD::FMSUBS1_RND; break;
    case X86ISD::FNMADD: NewOpcode = X86ISD::FNMADDS1_RND; break;
    case X86ISD::FNMSUB: NewOpcode = X86ISD::FNMSUBS1_RND; break;
    }
  } else if (N->getOpcode() == X86ISD::FMADDS3_RND) {
    switch (NewOpcode) {
    case ISD::FMA:       NewOpcode = X86ISD::FMADDS3_RND; break;
    case X86ISD::FMSUB:  NewOpcode = X86ISD::FMSUBS3_RND; break;
    case X86ISD::FNMADD: NewOpcode = X86ISD::FNMADDS3_RND; break;
    case X86ISD::FNMSUB: NewOpcode = X86ISD::FNMSUBS3_RND; break;
    }
  } else {
    llvm_unreachable("Unexpected opcode!");
  }

  // Only return the node is the opcode was changed or one of the
  // operand was negated. If not, we'll just recreate the same node.
  if (HasNeg || NewOpcode != N->getOpcode())
    return DAG.getNode(NewOpcode, dl, VT, A, B, C, N->getOperand(3));

  return SDValue();
}

static SDValue combineZext(SDNode *N, SelectionDAG &DAG,
                           TargetLowering::DAGCombinerInfo &DCI,
                           const X86Subtarget &Subtarget) {
  // (i32 zext (and (i8  x86isd::setcc_carry), 1)) ->
  //           (and (i32 x86isd::setcc_carry), 1)
  // This eliminates the zext. This transformation is necessary because
  // ISD::SETCC is always legalized to i8.
  SDLoc dl(N);
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);

  if (N0.getOpcode() == ISD::AND &&
      N0.hasOneUse() &&
      N0.getOperand(0).hasOneUse()) {
    SDValue N00 = N0.getOperand(0);
    if (N00.getOpcode() == X86ISD::SETCC_CARRY) {
      if (!isOneConstant(N0.getOperand(1)))
        return SDValue();
      return DAG.getNode(ISD::AND, dl, VT,
                         DAG.getNode(X86ISD::SETCC_CARRY, dl, VT,
                                     N00.getOperand(0), N00.getOperand(1)),
                         DAG.getConstant(1, dl, VT));
    }
  }

  if (N0.getOpcode() == ISD::TRUNCATE &&
      N0.hasOneUse() &&
      N0.getOperand(0).hasOneUse()) {
    SDValue N00 = N0.getOperand(0);
    if (N00.getOpcode() == X86ISD::SETCC_CARRY) {
      return DAG.getNode(ISD::AND, dl, VT,
                         DAG.getNode(X86ISD::SETCC_CARRY, dl, VT,
                                     N00.getOperand(0), N00.getOperand(1)),
                         DAG.getConstant(1, dl, VT));
    }
  }

  if (SDValue NewCMov = combineToExtendCMOV(N, DAG))
    return NewCMov;

  if (SDValue V = combineToExtendVectorInReg(N, DAG, DCI, Subtarget))
    return V;

  if (SDValue V = combineToExtendBoolVectorInReg(N, DAG, DCI, Subtarget))
    return V;

  if (VT.is256BitVector())
    if (SDValue R = WidenMaskArithmetic(N, DAG, DCI, Subtarget))
      return R;

  if (SDValue DivRem8 = getDivRem8(N, DAG))
    return DivRem8;

  if (SDValue NewAdd = promoteExtBeforeAdd(N, DAG, Subtarget))
    return NewAdd;

  if (SDValue R = combineOrCmpEqZeroToCtlzSrl(N, DAG, DCI, Subtarget))
    return R;

  return SDValue();
}

/// Try to map a 128-bit or larger integer comparison to vector instructions
/// before type legalization splits it up into chunks.
static SDValue combineVectorSizedSetCCEquality(SDNode *SetCC, SelectionDAG &DAG,
                                               const X86Subtarget &Subtarget) {
  ISD::CondCode CC = cast<CondCodeSDNode>(SetCC->getOperand(2))->get();
  assert((CC == ISD::SETNE || CC == ISD::SETEQ) && "Bad comparison predicate");

  // We're looking for an oversized integer equality comparison, but ignore a
  // comparison with zero because that gets special treatment in EmitTest().
  SDValue X = SetCC->getOperand(0);
  SDValue Y = SetCC->getOperand(1);
  EVT OpVT = X.getValueType();
  unsigned OpSize = OpVT.getSizeInBits();
  if (!OpVT.isScalarInteger() || OpSize < 128 || isNullConstant(Y))
    return SDValue();

  // Bail out if we know that this is not really just an oversized integer.
  if (peekThroughBitcasts(X).getValueType() == MVT::f128 ||
      peekThroughBitcasts(Y).getValueType() == MVT::f128)
    return SDValue();

  // TODO: Use PXOR + PTEST for SSE4.1 or later?
  // TODO: Add support for AVX-512.
  EVT VT = SetCC->getValueType(0);
  SDLoc DL(SetCC);
  if ((OpSize == 128 && Subtarget.hasSSE2()) ||
      (OpSize == 256 && Subtarget.hasAVX2())) {
    EVT VecVT = OpSize == 128 ? MVT::v16i8 : MVT::v32i8;
    SDValue VecX = DAG.getBitcast(VecVT, X);
    SDValue VecY = DAG.getBitcast(VecVT, Y);

    // If all bytes match (bitmask is 0x(FFFF)FFFF), that's equality.
    // setcc i128 X, Y, eq --> setcc (pmovmskb (pcmpeqb X, Y)), 0xFFFF, eq
    // setcc i128 X, Y, ne --> setcc (pmovmskb (pcmpeqb X, Y)), 0xFFFF, ne
    // setcc i256 X, Y, eq --> setcc (vpmovmskb (vpcmpeqb X, Y)), 0xFFFFFFFF, eq
    // setcc i256 X, Y, ne --> setcc (vpmovmskb (vpcmpeqb X, Y)), 0xFFFFFFFF, ne
    SDValue Cmp = DAG.getNode(X86ISD::PCMPEQ, DL, VecVT, VecX, VecY);
    SDValue MovMsk = DAG.getNode(X86ISD::MOVMSK, DL, MVT::i32, Cmp);
    SDValue FFFFs = DAG.getConstant(OpSize == 128 ? 0xFFFF : 0xFFFFFFFF, DL,
                                    MVT::i32);
    return DAG.getSetCC(DL, VT, MovMsk, FFFFs, CC);
  }

  return SDValue();
}

static SDValue combineSetCC(SDNode *N, SelectionDAG &DAG,
                            const X86Subtarget &Subtarget) {
  ISD::CondCode CC = cast<CondCodeSDNode>(N->getOperand(2))->get();
  SDValue LHS = N->getOperand(0);
  SDValue RHS = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  if (CC == ISD::SETNE || CC == ISD::SETEQ) {
    EVT OpVT = LHS.getValueType();
    // 0-x == y --> x+y == 0
    // 0-x != y --> x+y != 0
    if (LHS.getOpcode() == ISD::SUB && isNullConstant(LHS.getOperand(0)) &&
        LHS.hasOneUse()) {
      SDValue Add = DAG.getNode(ISD::ADD, DL, OpVT, RHS, LHS.getOperand(1));
      return DAG.getSetCC(DL, VT, Add, DAG.getConstant(0, DL, OpVT), CC);
    }
    // x == 0-y --> x+y == 0
    // x != 0-y --> x+y != 0
    if (RHS.getOpcode() == ISD::SUB && isNullConstant(RHS.getOperand(0)) &&
        RHS.hasOneUse()) {
      SDValue Add = DAG.getNode(ISD::ADD, DL, OpVT, LHS, RHS.getOperand(1));
      return DAG.getSetCC(DL, VT, Add, DAG.getConstant(0, DL, OpVT), CC);
    }

    if (SDValue V = combineVectorSizedSetCCEquality(N, DAG, Subtarget))
      return V;
  }

  if (VT.getScalarType() == MVT::i1 &&
      (CC == ISD::SETNE || CC == ISD::SETEQ || ISD::isSignedIntSetCC(CC))) {
    bool IsSEXT0 =
        (LHS.getOpcode() == ISD::SIGN_EXTEND) &&
        (LHS.getOperand(0).getValueType().getScalarType() == MVT::i1);
    bool IsVZero1 = ISD::isBuildVectorAllZeros(RHS.getNode());

    if (!IsSEXT0 || !IsVZero1) {
      // Swap the operands and update the condition code.
      std::swap(LHS, RHS);
      CC = ISD::getSetCCSwappedOperands(CC);

      IsSEXT0 = (LHS.getOpcode() == ISD::SIGN_EXTEND) &&
                (LHS.getOperand(0).getValueType().getScalarType() == MVT::i1);
      IsVZero1 = ISD::isBuildVectorAllZeros(RHS.getNode());
    }

    if (IsSEXT0 && IsVZero1) {
      assert(VT == LHS.getOperand(0).getValueType() &&
             "Uexpected operand type");
      if (CC == ISD::SETGT)
        return DAG.getConstant(0, DL, VT);
      if (CC == ISD::SETLE)
        return DAG.getConstant(1, DL, VT);
      if (CC == ISD::SETEQ || CC == ISD::SETGE)
        return DAG.getNOT(DL, LHS.getOperand(0), VT);

      assert((CC == ISD::SETNE || CC == ISD::SETLT) &&
             "Unexpected condition code!");
      return LHS.getOperand(0);
    }
  }

  // For an SSE1-only target, lower a comparison of v4f32 to X86ISD::CMPP early
  // to avoid scalarization via legalization because v4i32 is not a legal type.
  if (Subtarget.hasSSE1() && !Subtarget.hasSSE2() && VT == MVT::v4i32 &&
      LHS.getValueType() == MVT::v4f32)
    return LowerVSETCC(SDValue(N, 0), Subtarget, DAG);

  return SDValue();
}

static SDValue combineGatherScatter(SDNode *N, SelectionDAG &DAG) {
  SDLoc DL(N);
  // Gather and Scatter instructions use k-registers for masks. The type of
  // the masks is v*i1. So the mask will be truncated anyway.
  // The SIGN_EXTEND_INREG my be dropped.
  SDValue Mask = N->getOperand(2);
  if (Mask.getOpcode() == ISD::SIGN_EXTEND_INREG) {
    SmallVector<SDValue, 5> NewOps(N->op_begin(), N->op_end());
    NewOps[2] = Mask.getOperand(0);
    DAG.UpdateNodeOperands(N, NewOps);
  }
  return SDValue();
}

// Optimize  RES = X86ISD::SETCC CONDCODE, EFLAG_INPUT
static SDValue combineX86SetCC(SDNode *N, SelectionDAG &DAG,
                               const X86Subtarget &Subtarget) {
  SDLoc DL(N);
  X86::CondCode CC = X86::CondCode(N->getConstantOperandVal(0));
  SDValue EFLAGS = N->getOperand(1);

  // Try to simplify the EFLAGS and condition code operands.
  if (SDValue Flags = combineSetCCEFLAGS(EFLAGS, CC, DAG, Subtarget))
    return getSETCC(CC, Flags, DL, DAG);

  return SDValue();
}

/// Optimize branch condition evaluation.
static SDValue combineBrCond(SDNode *N, SelectionDAG &DAG,
                             const X86Subtarget &Subtarget) {
  SDLoc DL(N);
  SDValue EFLAGS = N->getOperand(3);
  X86::CondCode CC = X86::CondCode(N->getConstantOperandVal(2));

  // Try to simplify the EFLAGS and condition code operands.
  // Make sure to not keep references to operands, as combineSetCCEFLAGS can
  // RAUW them under us.
  if (SDValue Flags = combineSetCCEFLAGS(EFLAGS, CC, DAG, Subtarget)) {
    SDValue Cond = DAG.getConstant(CC, DL, MVT::i8);
    return DAG.getNode(X86ISD::BRCOND, DL, N->getVTList(), N->getOperand(0),
                       N->getOperand(1), Cond, Flags);
  }

  return SDValue();
}

static SDValue combineVectorCompareAndMaskUnaryOp(SDNode *N,
                                                  SelectionDAG &DAG) {
  // Take advantage of vector comparisons producing 0 or -1 in each lane to
  // optimize away operation when it's from a constant.
  //
  // The general transformation is:
  //    UNARYOP(AND(VECTOR_CMP(x,y), constant)) -->
  //       AND(VECTOR_CMP(x,y), constant2)
  //    constant2 = UNARYOP(constant)

  // Early exit if this isn't a vector operation, the operand of the
  // unary operation isn't a bitwise AND, or if the sizes of the operations
  // aren't the same.
  EVT VT = N->getValueType(0);
  if (!VT.isVector() || N->getOperand(0)->getOpcode() != ISD::AND ||
      N->getOperand(0)->getOperand(0)->getOpcode() != ISD::SETCC ||
      VT.getSizeInBits() != N->getOperand(0)->getValueType(0).getSizeInBits())
    return SDValue();

  // Now check that the other operand of the AND is a constant. We could
  // make the transformation for non-constant splats as well, but it's unclear
  // that would be a benefit as it would not eliminate any operations, just
  // perform one more step in scalar code before moving to the vector unit.
  if (BuildVectorSDNode *BV =
          dyn_cast<BuildVectorSDNode>(N->getOperand(0)->getOperand(1))) {
    // Bail out if the vector isn't a constant.
    if (!BV->isConstant())
      return SDValue();

    // Everything checks out. Build up the new and improved node.
    SDLoc DL(N);
    EVT IntVT = BV->getValueType(0);
    // Create a new constant of the appropriate type for the transformed
    // DAG.
    SDValue SourceConst = DAG.getNode(N->getOpcode(), DL, VT, SDValue(BV, 0));
    // The AND node needs bitcasts to/from an integer vector type around it.
    SDValue MaskConst = DAG.getBitcast(IntVT, SourceConst);
    SDValue NewAnd = DAG.getNode(ISD::AND, DL, IntVT,
                                 N->getOperand(0)->getOperand(0), MaskConst);
    SDValue Res = DAG.getBitcast(VT, NewAnd);
    return Res;
  }

  return SDValue();
}

static SDValue combineUIntToFP(SDNode *N, SelectionDAG &DAG,
                               const X86Subtarget &Subtarget) {
  SDValue Op0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  EVT InVT = Op0.getValueType();
  EVT InSVT = InVT.getScalarType();
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();

  // UINT_TO_FP(vXi8) -> SINT_TO_FP(ZEXT(vXi8 to vXi32))
  // UINT_TO_FP(vXi16) -> SINT_TO_FP(ZEXT(vXi16 to vXi32))
  if (InVT.isVector() && (InSVT == MVT::i8 || InSVT == MVT::i16)) {
    SDLoc dl(N);
    EVT DstVT = EVT::getVectorVT(*DAG.getContext(), MVT::i32,
                                 InVT.getVectorNumElements());
    SDValue P = DAG.getNode(ISD::ZERO_EXTEND, dl, DstVT, Op0);

    if (TLI.isOperationLegal(ISD::UINT_TO_FP, DstVT))
      return DAG.getNode(ISD::UINT_TO_FP, dl, VT, P);

    return DAG.getNode(ISD::SINT_TO_FP, dl, VT, P);
  }

  // Since UINT_TO_FP is legal (it's marked custom), dag combiner won't
  // optimize it to a SINT_TO_FP when the sign bit is known zero. Perform
  // the optimization here.
  if (DAG.SignBitIsZero(Op0))
    return DAG.getNode(ISD::SINT_TO_FP, SDLoc(N), VT, Op0);

  return SDValue();
}

static SDValue combineSIntToFP(SDNode *N, SelectionDAG &DAG,
                               const X86Subtarget &Subtarget) {
  // First try to optimize away the conversion entirely when it's
  // conditionally from a constant. Vectors only.
  if (SDValue Res = combineVectorCompareAndMaskUnaryOp(N, DAG))
    return Res;

  // Now move on to more general possibilities.
  SDValue Op0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  EVT InVT = Op0.getValueType();
  EVT InSVT = InVT.getScalarType();

  // SINT_TO_FP(vXi1) -> SINT_TO_FP(SEXT(vXi1 to vXi32))
  // SINT_TO_FP(vXi8) -> SINT_TO_FP(SEXT(vXi8 to vXi32))
  // SINT_TO_FP(vXi16) -> SINT_TO_FP(SEXT(vXi16 to vXi32))
  if (InVT.isVector() &&
      (InSVT == MVT::i8 || InSVT == MVT::i16 ||
       (InSVT == MVT::i1 && !DAG.getTargetLoweringInfo().isTypeLegal(InVT)))) {
    SDLoc dl(N);
    EVT DstVT = EVT::getVectorVT(*DAG.getContext(), MVT::i32,
                                 InVT.getVectorNumElements());
    SDValue P = DAG.getNode(ISD::SIGN_EXTEND, dl, DstVT, Op0);
    return DAG.getNode(ISD::SINT_TO_FP, dl, VT, P);
  }

  // Without AVX512DQ we only support i64 to float scalar conversion. For both
  // vectors and scalars, see if we know that the upper bits are all the sign
  // bit, in which case we can truncate the input to i32 and convert from that.
  if (InVT.getScalarSizeInBits() > 32 && !Subtarget.hasDQI()) {
    unsigned BitWidth = InVT.getScalarSizeInBits();
    unsigned NumSignBits = DAG.ComputeNumSignBits(Op0);
    if (NumSignBits >= (BitWidth - 31)) {
      EVT TruncVT = EVT::getIntegerVT(*DAG.getContext(), 32);
      if (InVT.isVector())
        TruncVT = EVT::getVectorVT(*DAG.getContext(), TruncVT,
                                   InVT.getVectorNumElements());
      SDLoc dl(N);
      SDValue Trunc = DAG.getNode(ISD::TRUNCATE, dl, TruncVT, Op0);
      return DAG.getNode(ISD::SINT_TO_FP, dl, VT, Trunc);
    }
  }

  // Transform (SINT_TO_FP (i64 ...)) into an x87 operation if we have
  // a 32-bit target where SSE doesn't support i64->FP operations.
  if (!Subtarget.useSoftFloat() && Op0.getOpcode() == ISD::LOAD) {
    LoadSDNode *Ld = cast<LoadSDNode>(Op0.getNode());
    EVT LdVT = Ld->getValueType(0);

    // This transformation is not supported if the result type is f16 or f128.
    if (VT == MVT::f16 || VT == MVT::f128)
      return SDValue();

    if (!Ld->isVolatile() && !VT.isVector() &&
        ISD::isNON_EXTLoad(Op0.getNode()) && Op0.hasOneUse() &&
        !Subtarget.is64Bit() && LdVT == MVT::i64) {
      SDValue FILDChain = Subtarget.getTargetLowering()->BuildFILD(
          SDValue(N, 0), LdVT, Ld->getChain(), Op0, DAG);
      DAG.ReplaceAllUsesOfValueWith(Op0.getValue(1), FILDChain.getValue(1));
      return FILDChain;
    }
  }
  return SDValue();
}

static SDValue combineSBB(SDNode *N, SelectionDAG &DAG) {
  if (SDValue Flags = combineCarryThroughADD(N->getOperand(2))) {
    MVT VT = N->getSimpleValueType(0);
    SDVTList VTs = DAG.getVTList(VT, MVT::i32);
    return DAG.getNode(X86ISD::SBB, SDLoc(N), VTs,
                       N->getOperand(0), N->getOperand(1),
                       Flags);
  }

  return SDValue();
}

// Optimize RES, EFLAGS = X86ISD::ADC LHS, RHS, EFLAGS
static SDValue combineADC(SDNode *N, SelectionDAG &DAG,
                          X86TargetLowering::DAGCombinerInfo &DCI) {
  // If the LHS and RHS of the ADC node are zero, then it can't overflow and
  // the result is either zero or one (depending on the input carry bit).
  // Strength reduce this down to a "set on carry" aka SETCC_CARRY&1.
  if (X86::isZeroNode(N->getOperand(0)) &&
      X86::isZeroNode(N->getOperand(1)) &&
      // We don't have a good way to replace an EFLAGS use, so only do this when
      // dead right now.
      SDValue(N, 1).use_empty()) {
    SDLoc DL(N);
    EVT VT = N->getValueType(0);
    SDValue CarryOut = DAG.getConstant(0, DL, N->getValueType(1));
    SDValue Res1 = DAG.getNode(ISD::AND, DL, VT,
                               DAG.getNode(X86ISD::SETCC_CARRY, DL, VT,
                                           DAG.getConstant(X86::COND_B, DL,
                                                           MVT::i8),
                                           N->getOperand(2)),
                               DAG.getConstant(1, DL, VT));
    return DCI.CombineTo(N, Res1, CarryOut);
  }

  if (SDValue Flags = combineCarryThroughADD(N->getOperand(2))) {
    MVT VT = N->getSimpleValueType(0);
    SDVTList VTs = DAG.getVTList(VT, MVT::i32);
    return DAG.getNode(X86ISD::ADC, SDLoc(N), VTs,
                       N->getOperand(0), N->getOperand(1),
                       Flags);
  }

  return SDValue();
}

/// Materialize "setb reg" as "sbb reg,reg", since it produces an all-ones bit
/// which is more useful than 0/1 in some cases.
static SDValue materializeSBB(SDNode *N, SDValue EFLAGS, SelectionDAG &DAG) {
  SDLoc DL(N);
  // "Condition code B" is also known as "the carry flag" (CF).
  SDValue CF = DAG.getConstant(X86::COND_B, DL, MVT::i8);
  SDValue SBB = DAG.getNode(X86ISD::SETCC_CARRY, DL, MVT::i8, CF, EFLAGS);
  MVT VT = N->getSimpleValueType(0);
  if (VT == MVT::i8)
    return DAG.getNode(ISD::AND, DL, VT, SBB, DAG.getConstant(1, DL, VT));

  assert(VT == MVT::i1 && "Unexpected type for SETCC node");
  return DAG.getNode(ISD::TRUNCATE, DL, MVT::i1, SBB);
}

/// If this is an add or subtract where one operand is produced by a cmp+setcc,
/// then try to convert it to an ADC or SBB. This replaces TEST+SET+{ADD/SUB}
/// with CMP+{ADC, SBB}.
static SDValue combineAddOrSubToADCOrSBB(SDNode *N, SelectionDAG &DAG) {
  bool IsSub = N->getOpcode() == ISD::SUB;
  SDValue X = N->getOperand(0);
  SDValue Y = N->getOperand(1);

  // If this is an add, canonicalize a zext operand to the RHS.
  // TODO: Incomplete? What if both sides are zexts?
  if (!IsSub && X.getOpcode() == ISD::ZERO_EXTEND &&
      Y.getOpcode() != ISD::ZERO_EXTEND)
    std::swap(X, Y);

  // Look through a one-use zext.
  bool PeekedThroughZext = false;
  if (Y.getOpcode() == ISD::ZERO_EXTEND && Y.hasOneUse()) {
    Y = Y.getOperand(0);
    PeekedThroughZext = true;
  }

  // If this is an add, canonicalize a setcc operand to the RHS.
  // TODO: Incomplete? What if both sides are setcc?
  // TODO: Should we allow peeking through a zext of the other operand?
  if (!IsSub && !PeekedThroughZext && X.getOpcode() == X86ISD::SETCC &&
      Y.getOpcode() != X86ISD::SETCC)
    std::swap(X, Y);

  if (Y.getOpcode() != X86ISD::SETCC || !Y.hasOneUse())
    return SDValue();

  SDLoc DL(N);
  EVT VT = N->getValueType(0);
  X86::CondCode CC = (X86::CondCode)Y.getConstantOperandVal(0);

  // If X is -1 or 0, then we have an opportunity to avoid constants required in
  // the general case below.
  auto *ConstantX = dyn_cast<ConstantSDNode>(X);
  if (ConstantX) {
    if ((!IsSub && CC == X86::COND_AE && ConstantX->isAllOnesValue()) ||
        (IsSub && CC == X86::COND_B && ConstantX->isNullValue())) {
      // This is a complicated way to get -1 or 0 from the carry flag:
      // -1 + SETAE --> -1 + (!CF) --> CF ? -1 : 0 --> SBB %eax, %eax
      //  0 - SETB  -->  0 -  (CF) --> CF ? -1 : 0 --> SBB %eax, %eax
      return DAG.getNode(X86ISD::SETCC_CARRY, DL, VT,
                         DAG.getConstant(X86::COND_B, DL, MVT::i8),
                         Y.getOperand(1));
    }

    if ((!IsSub && CC == X86::COND_BE && ConstantX->isAllOnesValue()) ||
        (IsSub && CC == X86::COND_A && ConstantX->isNullValue())) {
      SDValue EFLAGS = Y->getOperand(1);
      if (EFLAGS.getOpcode() == X86ISD::SUB && EFLAGS.hasOneUse() &&
          EFLAGS.getValueType().isInteger() &&
          !isa<ConstantSDNode>(EFLAGS.getOperand(1))) {
        // Swap the operands of a SUB, and we have the same pattern as above.
        // -1 + SETBE (SUB A, B) --> -1 + SETAE (SUB B, A) --> SUB + SBB
        //  0 - SETA  (SUB A, B) -->  0 - SETB  (SUB B, A) --> SUB + SBB
        SDValue NewSub = DAG.getNode(
            X86ISD::SUB, SDLoc(EFLAGS), EFLAGS.getNode()->getVTList(),
            EFLAGS.getOperand(1), EFLAGS.getOperand(0));
        SDValue NewEFLAGS = SDValue(NewSub.getNode(), EFLAGS.getResNo());
        return DAG.getNode(X86ISD::SETCC_CARRY, DL, VT,
                           DAG.getConstant(X86::COND_B, DL, MVT::i8),
                           NewEFLAGS);
      }
    }
  }

  if (CC == X86::COND_B) {
    // X + SETB Z --> X + (mask SBB Z, Z)
    // X - SETB Z --> X - (mask SBB Z, Z)
    // TODO: Produce ADC/SBB here directly and avoid SETCC_CARRY?
    SDValue SBB = materializeSBB(Y.getNode(), Y.getOperand(1), DAG);
    if (SBB.getValueSizeInBits() != VT.getSizeInBits())
      SBB = DAG.getZExtOrTrunc(SBB, DL, VT);
    return DAG.getNode(IsSub ? ISD::SUB : ISD::ADD, DL, VT, X, SBB);
  }

  if (CC == X86::COND_A) {
    SDValue EFLAGS = Y->getOperand(1);
    // Try to convert COND_A into COND_B in an attempt to facilitate
    // materializing "setb reg".
    //
    // Do not flip "e > c", where "c" is a constant, because Cmp instruction
    // cannot take an immediate as its first operand.
    //
    if (EFLAGS.getOpcode() == X86ISD::SUB && EFLAGS.hasOneUse() &&
        EFLAGS.getValueType().isInteger() &&
        !isa<ConstantSDNode>(EFLAGS.getOperand(1))) {
      SDValue NewSub = DAG.getNode(X86ISD::SUB, SDLoc(EFLAGS),
                                   EFLAGS.getNode()->getVTList(),
                                   EFLAGS.getOperand(1), EFLAGS.getOperand(0));
      SDValue NewEFLAGS = SDValue(NewSub.getNode(), EFLAGS.getResNo());
      SDValue SBB = materializeSBB(Y.getNode(), NewEFLAGS, DAG);
      if (SBB.getValueSizeInBits() != VT.getSizeInBits())
        SBB = DAG.getZExtOrTrunc(SBB, DL, VT);
      return DAG.getNode(IsSub ? ISD::SUB : ISD::ADD, DL, VT, X, SBB);
    }
  }

  if (CC != X86::COND_E && CC != X86::COND_NE)
    return SDValue();

  SDValue Cmp = Y.getOperand(1);
  if (Cmp.getOpcode() != X86ISD::CMP || !Cmp.hasOneUse() ||
      !X86::isZeroNode(Cmp.getOperand(1)) ||
      !Cmp.getOperand(0).getValueType().isInteger())
    return SDValue();

  SDValue Z = Cmp.getOperand(0);
  EVT ZVT = Z.getValueType();

  // If X is -1 or 0, then we have an opportunity to avoid constants required in
  // the general case below.
  if (ConstantX) {
    // 'neg' sets the carry flag when Z != 0, so create 0 or -1 using 'sbb' with
    // fake operands:
    //  0 - (Z != 0) --> sbb %eax, %eax, (neg Z)
    // -1 + (Z == 0) --> sbb %eax, %eax, (neg Z)
    if ((IsSub && CC == X86::COND_NE && ConstantX->isNullValue()) ||
        (!IsSub && CC == X86::COND_E && ConstantX->isAllOnesValue())) {
      SDValue Zero = DAG.getConstant(0, DL, ZVT);
      SDVTList X86SubVTs = DAG.getVTList(ZVT, MVT::i32);
      SDValue Neg = DAG.getNode(X86ISD::SUB, DL, X86SubVTs, Zero, Z);
      return DAG.getNode(X86ISD::SETCC_CARRY, DL, VT,
                         DAG.getConstant(X86::COND_B, DL, MVT::i8),
                         SDValue(Neg.getNode(), 1));
    }

    // cmp with 1 sets the carry flag when Z == 0, so create 0 or -1 using 'sbb'
    // with fake operands:
    //  0 - (Z == 0) --> sbb %eax, %eax, (cmp Z, 1)
    // -1 + (Z != 0) --> sbb %eax, %eax, (cmp Z, 1)
    if ((IsSub && CC == X86::COND_E && ConstantX->isNullValue()) ||
        (!IsSub && CC == X86::COND_NE && ConstantX->isAllOnesValue())) {
      SDValue One = DAG.getConstant(1, DL, ZVT);
      SDValue Cmp1 = DAG.getNode(X86ISD::CMP, DL, MVT::i32, Z, One);
      return DAG.getNode(X86ISD::SETCC_CARRY, DL, VT,
                         DAG.getConstant(X86::COND_B, DL, MVT::i8), Cmp1);
    }
  }

  // (cmp Z, 1) sets the carry flag if Z is 0.
  SDValue One = DAG.getConstant(1, DL, ZVT);
  SDValue Cmp1 = DAG.getNode(X86ISD::CMP, DL, MVT::i32, Z, One);

  // Add the flags type for ADC/SBB nodes.
  SDVTList VTs = DAG.getVTList(VT, MVT::i32);

  // X - (Z != 0) --> sub X, (zext(setne Z, 0)) --> adc X, -1, (cmp Z, 1)
  // X + (Z != 0) --> add X, (zext(setne Z, 0)) --> sbb X, -1, (cmp Z, 1)
  if (CC == X86::COND_NE)
    return DAG.getNode(IsSub ? X86ISD::ADC : X86ISD::SBB, DL, VTs, X,
                       DAG.getConstant(-1ULL, DL, VT), Cmp1);

  // X - (Z == 0) --> sub X, (zext(sete  Z, 0)) --> sbb X, 0, (cmp Z, 1)
  // X + (Z == 0) --> add X, (zext(sete  Z, 0)) --> adc X, 0, (cmp Z, 1)
  return DAG.getNode(IsSub ? X86ISD::SBB : X86ISD::ADC, DL, VTs, X,
                     DAG.getConstant(0, DL, VT), Cmp1);
}

static SDValue combineLoopMAddPattern(SDNode *N, SelectionDAG &DAG,
                                      const X86Subtarget &Subtarget) {
  if (!Subtarget.hasSSE2())
    return SDValue();

  SDValue MulOp = N->getOperand(0);
  SDValue Phi = N->getOperand(1);

  if (MulOp.getOpcode() != ISD::MUL)
    std::swap(MulOp, Phi);
  if (MulOp.getOpcode() != ISD::MUL)
    return SDValue();

  ShrinkMode Mode;
  if (!canReduceVMulWidth(MulOp.getNode(), DAG, Mode) || Mode == MULU16)
    return SDValue();

  EVT VT = N->getValueType(0);

  unsigned RegSize = 128;
  if (Subtarget.hasBWI())
    RegSize = 512;
  else if (Subtarget.hasAVX2())
    RegSize = 256;
  unsigned VectorSize = VT.getVectorNumElements() * 16;
  // If the vector size is less than 128, or greater than the supported RegSize,
  // do not use PMADD.
  if (VectorSize < 128 || VectorSize > RegSize)
    return SDValue();

  SDLoc DL(N);
  EVT ReducedVT = EVT::getVectorVT(*DAG.getContext(), MVT::i16,
                                   VT.getVectorNumElements());
  EVT MAddVT = EVT::getVectorVT(*DAG.getContext(), MVT::i32,
                                VT.getVectorNumElements() / 2);

  // Shrink the operands of mul.
  SDValue N0 = DAG.getNode(ISD::TRUNCATE, DL, ReducedVT, MulOp->getOperand(0));
  SDValue N1 = DAG.getNode(ISD::TRUNCATE, DL, ReducedVT, MulOp->getOperand(1));

  // Madd vector size is half of the original vector size
  SDValue Madd = DAG.getNode(X86ISD::VPMADDWD, DL, MAddVT, N0, N1);
  // Fill the rest of the output with 0
  SDValue Zero = getZeroVector(Madd.getSimpleValueType(), Subtarget, DAG, DL);
  SDValue Concat = DAG.getNode(ISD::CONCAT_VECTORS, DL, VT, Madd, Zero);
  return DAG.getNode(ISD::ADD, DL, VT, Concat, Phi);
}

static SDValue combineLoopSADPattern(SDNode *N, SelectionDAG &DAG,
                                     const X86Subtarget &Subtarget) {
  if (!Subtarget.hasSSE2())
    return SDValue();

  SDLoc DL(N);
  EVT VT = N->getValueType(0);
  SDValue Op0 = N->getOperand(0);
  SDValue Op1 = N->getOperand(1);

  // TODO: There's nothing special about i32, any integer type above i16 should
  // work just as well.
  if (!VT.isVector() || !VT.isSimple() ||
      !(VT.getVectorElementType() == MVT::i32))
    return SDValue();

  unsigned RegSize = 128;
  if (Subtarget.hasBWI())
    RegSize = 512;
  else if (Subtarget.hasAVX2())
    RegSize = 256;

  // We only handle v16i32 for SSE2 / v32i32 for AVX2 / v64i32 for AVX512.
  // TODO: We should be able to handle larger vectors by splitting them before
  // feeding them into several SADs, and then reducing over those.
  if (VT.getSizeInBits() / 4 > RegSize)
    return SDValue();

  // We know N is a reduction add, which means one of its operands is a phi.
  // To match SAD, we need the other operand to be a vector select.
  SDValue SelectOp, Phi;
  if (Op0.getOpcode() == ISD::VSELECT) {
    SelectOp = Op0;
    Phi = Op1;
  } else if (Op1.getOpcode() == ISD::VSELECT) {
    SelectOp = Op1;
    Phi = Op0;
  } else
    return SDValue();

  // Check whether we have an abs-diff pattern feeding into the select.
  if(!detectZextAbsDiff(SelectOp, Op0, Op1))
    return SDValue();

  // SAD pattern detected. Now build a SAD instruction and an addition for
  // reduction. Note that the number of elements of the result of SAD is less
  // than the number of elements of its input. Therefore, we could only update
  // part of elements in the reduction vector.
  SDValue Sad = createPSADBW(DAG, Op0, Op1, DL);

  // The output of PSADBW is a vector of i64.
  // We need to turn the vector of i64 into a vector of i32.
  // If the reduction vector is at least as wide as the psadbw result, just
  // bitcast. If it's narrower, truncate - the high i32 of each i64 is zero
  // anyway.
  MVT ResVT = MVT::getVectorVT(MVT::i32, Sad.getValueSizeInBits() / 32);
  if (VT.getSizeInBits() >= ResVT.getSizeInBits())
    Sad = DAG.getNode(ISD::BITCAST, DL, ResVT, Sad);
  else
    Sad = DAG.getNode(ISD::TRUNCATE, DL, VT, Sad);

  if (VT.getSizeInBits() > ResVT.getSizeInBits()) {
    // Fill the upper elements with zero to match the add width.
    SDValue Zero = DAG.getConstant(0, DL, VT);
    Sad = DAG.getNode(ISD::INSERT_SUBVECTOR, DL, VT, Zero, Sad,
                      DAG.getIntPtrConstant(0, DL));
  }

  return DAG.getNode(ISD::ADD, DL, VT, Sad, Phi);
}

/// Convert vector increment or decrement to sub/add with an all-ones constant:
/// add X, <1, 1...> --> sub X, <-1, -1...>
/// sub X, <1, 1...> --> add X, <-1, -1...>
/// The all-ones vector constant can be materialized using a pcmpeq instruction
/// that is commonly recognized as an idiom (has no register dependency), so
/// that's better/smaller than loading a splat 1 constant.
static SDValue combineIncDecVector(SDNode *N, SelectionDAG &DAG) {
  assert((N->getOpcode() == ISD::ADD || N->getOpcode() == ISD::SUB) &&
         "Unexpected opcode for increment/decrement transform");

  // Pseudo-legality check: getOnesVector() expects one of these types, so bail
  // out and wait for legalization if we have an unsupported vector length.
  EVT VT = N->getValueType(0);
  if (!VT.is128BitVector() && !VT.is256BitVector() && !VT.is512BitVector())
    return SDValue();

  SDNode *N1 = N->getOperand(1).getNode();
  APInt SplatVal;
  if (!ISD::isConstantSplatVector(N1, SplatVal) ||
      !SplatVal.isOneValue())
    return SDValue();

  SDValue AllOnesVec = getOnesVector(VT, DAG, SDLoc(N));
  unsigned NewOpcode = N->getOpcode() == ISD::ADD ? ISD::SUB : ISD::ADD;
  return DAG.getNode(NewOpcode, SDLoc(N), VT, N->getOperand(0), AllOnesVec);
}

static SDValue combineAdd(SDNode *N, SelectionDAG &DAG,
                          const X86Subtarget &Subtarget) {
  const SDNodeFlags Flags = N->getFlags();
  if (Flags.hasVectorReduction()) {
    if (SDValue Sad = combineLoopSADPattern(N, DAG, Subtarget))
      return Sad;
    if (SDValue MAdd = combineLoopMAddPattern(N, DAG, Subtarget))
      return MAdd;
  }
  EVT VT = N->getValueType(0);
  SDValue Op0 = N->getOperand(0);
  SDValue Op1 = N->getOperand(1);

  // Try to synthesize horizontal adds from adds of shuffles.
  if (((Subtarget.hasSSSE3() && (VT == MVT::v8i16 || VT == MVT::v4i32)) ||
       (Subtarget.hasInt256() && (VT == MVT::v16i16 || VT == MVT::v8i32))) &&
      isHorizontalBinOp(Op0, Op1, true))
    return DAG.getNode(X86ISD::HADD, SDLoc(N), VT, Op0, Op1);

  if (SDValue V = combineIncDecVector(N, DAG))
    return V;

  return combineAddOrSubToADCOrSBB(N, DAG);
}

static SDValue combineSubToSubus(SDNode *N, SelectionDAG &DAG,
                                 const X86Subtarget &Subtarget) {
  SDValue Op0 = N->getOperand(0);
  SDValue Op1 = N->getOperand(1);
  EVT VT = N->getValueType(0);

  // PSUBUS is supported, starting from SSE2, but special preprocessing
  // for v8i32 requires umin, which appears in SSE41.
  if (!(Subtarget.hasSSE2() && (VT == MVT::v16i8 || VT == MVT::v8i16)) &&
      !(Subtarget.hasSSE41() && (VT == MVT::v8i32)) &&
      !(Subtarget.hasAVX2() && (VT == MVT::v32i8 || VT == MVT::v16i16)) &&
      !(Subtarget.hasAVX512() && Subtarget.hasBWI() &&
        (VT == MVT::v64i8 || VT == MVT::v32i16 || VT == MVT::v16i32 ||
         VT == MVT::v8i64)))
    return SDValue();

  SDValue SubusLHS, SubusRHS;
  // Try to find umax(a,b) - b or a - umin(a,b) patterns
  // they may be converted to subus(a,b).
  // TODO: Need to add IR cannonicialization for this code.
  if (Op0.getOpcode() == ISD::UMAX) {
    SubusRHS = Op1;
    SDValue MaxLHS = Op0.getOperand(0);
    SDValue MaxRHS = Op0.getOperand(1);
    if (MaxLHS == Op1)
      SubusLHS = MaxRHS;
    else if (MaxRHS == Op1)
      SubusLHS = MaxLHS;
    else
      return SDValue();
  } else if (Op1.getOpcode() == ISD::UMIN) {
    SubusLHS = Op0;
    SDValue MinLHS = Op1.getOperand(0);
    SDValue MinRHS = Op1.getOperand(1);
    if (MinLHS == Op0)
      SubusRHS = MinRHS;
    else if (MinRHS == Op0)
      SubusRHS = MinLHS;
    else
      return SDValue();
  } else
    return SDValue();

  // PSUBUS doesn't support v8i32/v8i64/v16i32, but it can be enabled with
  // special preprocessing in some cases.
  if (VT != MVT::v8i32 && VT != MVT::v16i32 && VT != MVT::v8i64)
    return DAG.getNode(X86ISD::SUBUS, SDLoc(N), VT, SubusLHS, SubusRHS);

  // Special preprocessing case can be only applied
  // if the value was zero extended from 16 bit,
  // so we require first 16 bits to be zeros for 32 bit
  // values, or first 48 bits for 64 bit values.
  KnownBits Known;
  DAG.computeKnownBits(SubusLHS, Known);
  unsigned NumZeros = Known.countMinLeadingZeros();
  if ((VT == MVT::v8i64 && NumZeros < 48) || NumZeros < 16)
    return SDValue();

  EVT ExtType = SubusLHS.getValueType();
  EVT ShrinkedType;
  if (VT == MVT::v8i32 || VT == MVT::v8i64)
    ShrinkedType = MVT::v8i16;
  else
    ShrinkedType = NumZeros >= 24 ? MVT::v16i8 : MVT::v16i16;

  // If SubusLHS is zeroextended - truncate SubusRHS to it's
  // size SubusRHS = umin(0xFFF.., SubusRHS).
  SDValue SaturationConst =
      DAG.getConstant(APInt::getLowBitsSet(ExtType.getScalarSizeInBits(),
                                           ShrinkedType.getScalarSizeInBits()),
                      SDLoc(SubusLHS), ExtType);
  SDValue UMin = DAG.getNode(ISD::UMIN, SDLoc(SubusLHS), ExtType, SubusRHS,
                             SaturationConst);
  SDValue NewSubusLHS =
      DAG.getZExtOrTrunc(SubusLHS, SDLoc(SubusLHS), ShrinkedType);
  SDValue NewSubusRHS = DAG.getZExtOrTrunc(UMin, SDLoc(SubusRHS), ShrinkedType);
  SDValue Psubus = DAG.getNode(X86ISD::SUBUS, SDLoc(N), ShrinkedType,
                               NewSubusLHS, NewSubusRHS);
  // Zero extend the result, it may be used somewhere as 32 bit,
  // if not zext and following trunc will shrink.
  return DAG.getZExtOrTrunc(Psubus, SDLoc(N), ExtType);
}

static SDValue combineSub(SDNode *N, SelectionDAG &DAG,
                          const X86Subtarget &Subtarget) {
  SDValue Op0 = N->getOperand(0);
  SDValue Op1 = N->getOperand(1);

  // X86 can't encode an immediate LHS of a sub. See if we can push the
  // negation into a preceding instruction.
  if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op0)) {
    // If the RHS of the sub is a XOR with one use and a constant, invert the
    // immediate. Then add one to the LHS of the sub so we can turn
    // X-Y -> X+~Y+1, saving one register.
    if (Op1->hasOneUse() && Op1.getOpcode() == ISD::XOR &&
        isa<ConstantSDNode>(Op1.getOperand(1))) {
      APInt XorC = cast<ConstantSDNode>(Op1.getOperand(1))->getAPIntValue();
      EVT VT = Op0.getValueType();
      SDValue NewXor = DAG.getNode(ISD::XOR, SDLoc(Op1), VT,
                                   Op1.getOperand(0),
                                   DAG.getConstant(~XorC, SDLoc(Op1), VT));
      return DAG.getNode(ISD::ADD, SDLoc(N), VT, NewXor,
                         DAG.getConstant(C->getAPIntValue() + 1, SDLoc(N), VT));
    }
  }

  // Try to synthesize horizontal subs from subs of shuffles.
  EVT VT = N->getValueType(0);
  if (((Subtarget.hasSSSE3() && (VT == MVT::v8i16 || VT == MVT::v4i32)) ||
       (Subtarget.hasInt256() && (VT == MVT::v16i16 || VT == MVT::v8i32))) &&
      isHorizontalBinOp(Op0, Op1, false))
    return DAG.getNode(X86ISD::HSUB, SDLoc(N), VT, Op0, Op1);

  if (SDValue V = combineIncDecVector(N, DAG))
    return V;

  // Try to create PSUBUS if SUB's argument is max/min
  if (SDValue V = combineSubToSubus(N, DAG, Subtarget))
    return V;

  return combineAddOrSubToADCOrSBB(N, DAG);
}

static SDValue combineVSZext(SDNode *N, SelectionDAG &DAG,
                             TargetLowering::DAGCombinerInfo &DCI,
                             const X86Subtarget &Subtarget) {
  if (DCI.isBeforeLegalize())
    return SDValue();

  SDLoc DL(N);
  unsigned Opcode = N->getOpcode();
  MVT VT = N->getSimpleValueType(0);
  MVT SVT = VT.getVectorElementType();
  unsigned NumElts = VT.getVectorNumElements();
  unsigned EltSizeInBits = SVT.getSizeInBits();

  SDValue Op = N->getOperand(0);
  MVT OpVT = Op.getSimpleValueType();
  MVT OpEltVT = OpVT.getVectorElementType();
  unsigned OpEltSizeInBits = OpEltVT.getSizeInBits();
  unsigned InputBits = OpEltSizeInBits * NumElts;

  // Perform any constant folding.
  // FIXME: Reduce constant pool usage and don't fold when OptSize is enabled.
  APInt UndefElts;
  SmallVector<APInt, 64> EltBits;
  if (getTargetConstantBitsFromNode(Op, OpEltSizeInBits, UndefElts, EltBits)) {
    APInt Undefs(NumElts, 0);
    SmallVector<APInt, 4> Vals(NumElts, APInt(EltSizeInBits, 0));
    bool IsZEXT =
        (Opcode == X86ISD::VZEXT) || (Opcode == ISD::ZERO_EXTEND_VECTOR_INREG);
    for (unsigned i = 0; i != NumElts; ++i) {
      if (UndefElts[i]) {
        Undefs.setBit(i);
        continue;
      }
      Vals[i] = IsZEXT ? EltBits[i].zextOrTrunc(EltSizeInBits)
                       : EltBits[i].sextOrTrunc(EltSizeInBits);
    }
    return getConstVector(Vals, Undefs, VT, DAG, DL);
  }

  // (vzext (bitcast (vzext (x)) -> (vzext x)
  // TODO: (vsext (bitcast (vsext (x)) -> (vsext x)
  SDValue V = peekThroughBitcasts(Op);
  if (Opcode == X86ISD::VZEXT && V != Op && V.getOpcode() == X86ISD::VZEXT) {
    MVT InnerVT = V.getSimpleValueType();
    MVT InnerEltVT = InnerVT.getVectorElementType();

    // If the element sizes match exactly, we can just do one larger vzext. This
    // is always an exact type match as vzext operates on integer types.
    if (OpEltVT == InnerEltVT) {
      assert(OpVT == InnerVT && "Types must match for vzext!");
      return DAG.getNode(X86ISD::VZEXT, DL, VT, V.getOperand(0));
    }

    // The only other way we can combine them is if only a single element of the
    // inner vzext is used in the input to the outer vzext.
    if (InnerEltVT.getSizeInBits() < InputBits)
      return SDValue();

    // In this case, the inner vzext is completely dead because we're going to
    // only look at bits inside of the low element. Just do the outer vzext on
    // a bitcast of the input to the inner.
    return DAG.getNode(X86ISD::VZEXT, DL, VT, DAG.getBitcast(OpVT, V));
  }

  // Check if we can bypass extracting and re-inserting an element of an input
  // vector. Essentially:
  // (bitcast (sclr2vec (ext_vec_elt x))) -> (bitcast x)
  // TODO: Add X86ISD::VSEXT support
  if (Opcode == X86ISD::VZEXT &&
      V.getOpcode() == ISD::SCALAR_TO_VECTOR &&
      V.getOperand(0).getOpcode() == ISD::EXTRACT_VECTOR_ELT &&
      V.getOperand(0).getSimpleValueType().getSizeInBits() == InputBits) {
    SDValue ExtractedV = V.getOperand(0);
    SDValue OrigV = ExtractedV.getOperand(0);
    if (isNullConstant(ExtractedV.getOperand(1))) {
        MVT OrigVT = OrigV.getSimpleValueType();
        // Extract a subvector if necessary...
        if (OrigVT.getSizeInBits() > OpVT.getSizeInBits()) {
          int Ratio = OrigVT.getSizeInBits() / OpVT.getSizeInBits();
          OrigVT = MVT::getVectorVT(OrigVT.getVectorElementType(),
                                    OrigVT.getVectorNumElements() / Ratio);
          OrigV = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, OrigVT, OrigV,
                              DAG.getIntPtrConstant(0, DL));
        }
        Op = DAG.getBitcast(OpVT, OrigV);
        return DAG.getNode(X86ISD::VZEXT, DL, VT, Op);
      }
  }

  return SDValue();
}

static SDValue combineTestM(SDNode *N, SelectionDAG &DAG,
                            const X86Subtarget &Subtarget) {
  SDValue Op0 = N->getOperand(0);
  SDValue Op1 = N->getOperand(1);

  MVT VT = N->getSimpleValueType(0);
  SDLoc DL(N);

  // TEST (AND a, b) ,(AND a, b) -> TEST a, b
  if (Op0 == Op1 && Op1->getOpcode() == ISD::AND)
    return DAG.getNode(X86ISD::TESTM, DL, VT, Op0->getOperand(0),
                       Op0->getOperand(1));

  // TEST op0, BUILD_VECTOR(all_zero) -> BUILD_VECTOR(all_zero)
  // TEST BUILD_VECTOR(all_zero), op1 -> BUILD_VECTOR(all_zero)
  if (ISD::isBuildVectorAllZeros(Op0.getNode()) ||
      ISD::isBuildVectorAllZeros(Op1.getNode()))
    return getZeroVector(VT, Subtarget, DAG, DL);

  return SDValue();
}

static SDValue combineVectorCompare(SDNode *N, SelectionDAG &DAG,
                                    const X86Subtarget &Subtarget) {
  MVT VT = N->getSimpleValueType(0);
  SDLoc DL(N);

  if (N->getOperand(0) == N->getOperand(1)) {
    if (N->getOpcode() == X86ISD::PCMPEQ)
      return getOnesVector(VT, DAG, DL);
    if (N->getOpcode() == X86ISD::PCMPGT)
      return getZeroVector(VT, Subtarget, DAG, DL);
  }

  return SDValue();
}

static SDValue combineInsertSubvector(SDNode *N, SelectionDAG &DAG,
                                      TargetLowering::DAGCombinerInfo &DCI,
                                      const X86Subtarget &Subtarget) {
  if (DCI.isBeforeLegalizeOps())
    return SDValue();

  MVT OpVT = N->getSimpleValueType(0);

  // Early out for mask vectors.
  if (OpVT.getVectorElementType() == MVT::i1)
    return SDValue();

  SDLoc dl(N);
  SDValue Vec = N->getOperand(0);
  SDValue SubVec = N->getOperand(1);

  unsigned IdxVal = N->getConstantOperandVal(2);
  MVT SubVecVT = SubVec.getSimpleValueType();

  if (ISD::isBuildVectorAllZeros(Vec.getNode())) {
    // Inserting zeros into zeros is a nop.
    if (ISD::isBuildVectorAllZeros(SubVec.getNode()))
      return Vec;

    // If we're inserting into a zero vector and then into a larger zero vector,
    // just insert into the larger zero vector directly.
    if (SubVec.getOpcode() == ISD::INSERT_SUBVECTOR &&
        ISD::isBuildVectorAllZeros(SubVec.getOperand(0).getNode())) {
      unsigned Idx2Val = SubVec.getConstantOperandVal(2);
      return DAG.getNode(ISD::INSERT_SUBVECTOR, dl, OpVT, Vec,
                         SubVec.getOperand(1),
                         DAG.getIntPtrConstant(IdxVal + Idx2Val, dl));
    }

    // If we're inserting a bitcast into zeros, rewrite the insert and move the
    // bitcast to the other side. This helps with detecting zero extending
    // during isel.
    // TODO: Is this useful for other indices than 0?
    if (SubVec.getOpcode() == ISD::BITCAST && IdxVal == 0) {
      MVT CastVT = SubVec.getOperand(0).getSimpleValueType();
      unsigned NumElems = OpVT.getSizeInBits() / CastVT.getScalarSizeInBits();
      MVT NewVT = MVT::getVectorVT(CastVT.getVectorElementType(), NumElems);
      SDValue Insert = DAG.getNode(ISD::INSERT_SUBVECTOR, dl, NewVT,
                                   DAG.getBitcast(NewVT, Vec),
                                   SubVec.getOperand(0), N->getOperand(2));
      return DAG.getBitcast(OpVT, Insert);
    }
  }

  // If this is an insert of an extract, combine to a shuffle. Don't do this
  // if the insert or extract can be represented with a subregister operation.
  if (SubVec.getOpcode() == ISD::EXTRACT_SUBVECTOR &&
      SubVec.getOperand(0).getSimpleValueType() == OpVT &&
      (IdxVal != 0 || !Vec.isUndef())) {
    int ExtIdxVal = SubVec.getConstantOperandVal(1);
    if (ExtIdxVal != 0) {
      int VecNumElts = OpVT.getVectorNumElements();
      int SubVecNumElts = SubVecVT.getVectorNumElements();
      SmallVector<int, 64> Mask(VecNumElts);
      // First create an identity shuffle mask.
      for (int i = 0; i != VecNumElts; ++i)
        Mask[i] = i;
      // Now insert the extracted portion.
      for (int i = 0; i != SubVecNumElts; ++i)
        Mask[i + IdxVal] = i + ExtIdxVal + VecNumElts;

      return DAG.getVectorShuffle(OpVT, dl, Vec, SubVec.getOperand(0), Mask);
    }
  }

  // Fold two 16-byte or 32-byte subvector loads into one 32-byte or 64-byte
  // load:
  // (insert_subvector (insert_subvector undef, (load16 addr), 0),
  //                   (load16 addr + 16), Elts/2)
  // --> load32 addr
  // or:
  // (insert_subvector (insert_subvector undef, (load32 addr), 0),
  //                   (load32 addr + 32), Elts/2)
  // --> load64 addr
  // or a 16-byte or 32-byte broadcast:
  // (insert_subvector (insert_subvector undef, (load16 addr), 0),
  //                   (load16 addr), Elts/2)
  // --> X86SubVBroadcast(load16 addr)
  // or:
  // (insert_subvector (insert_subvector undef, (load32 addr), 0),
  //                   (load32 addr), Elts/2)
  // --> X86SubVBroadcast(load32 addr)
  if ((IdxVal == OpVT.getVectorNumElements() / 2) &&
      Vec.getOpcode() == ISD::INSERT_SUBVECTOR &&
      OpVT.getSizeInBits() == SubVecVT.getSizeInBits() * 2) {
    auto *Idx2 = dyn_cast<ConstantSDNode>(Vec.getOperand(2));
    if (Idx2 && Idx2->getZExtValue() == 0) {
      SDValue SubVec2 = Vec.getOperand(1);
      // If needed, look through bitcasts to get to the load.
      if (auto *FirstLd = dyn_cast<LoadSDNode>(peekThroughBitcasts(SubVec2))) {
        bool Fast;
        unsigned Alignment = FirstLd->getAlignment();
        unsigned AS = FirstLd->getAddressSpace();
        const X86TargetLowering *TLI = Subtarget.getTargetLowering();
        if (TLI->allowsMemoryAccess(*DAG.getContext(), DAG.getDataLayout(),
                                    OpVT, AS, Alignment, &Fast) && Fast) {
          SDValue Ops[] = {SubVec2, SubVec};
          if (SDValue Ld = EltsFromConsecutiveLoads(OpVT, Ops, dl, DAG,
                                                    Subtarget, false))
            return Ld;
        }
      }
      // If lower/upper loads are the same and the only users of the load, then
      // lower to a VBROADCASTF128/VBROADCASTI128/etc.
      if (auto *Ld = dyn_cast<LoadSDNode>(peekThroughOneUseBitcasts(SubVec2)))
        if (SubVec2 == SubVec && ISD::isNormalLoad(Ld) &&
            SDNode::areOnlyUsersOf({N, Vec.getNode()}, SubVec2.getNode()))
          return DAG.getNode(X86ISD::SUBV_BROADCAST, dl, OpVT, SubVec);

      // If this is subv_broadcast insert into both halves, use a larger
      // subv_broadcast.
      if (SubVec.getOpcode() == X86ISD::SUBV_BROADCAST && SubVec == SubVec2)
        return DAG.getNode(X86ISD::SUBV_BROADCAST, dl, OpVT,
                           SubVec.getOperand(0));

      // If we're inserting all zeros into the upper half, change this to
      // an insert into an all zeros vector. We will match this to a move
      // with implicit upper bit zeroing during isel.
      if (ISD::isBuildVectorAllZeros(SubVec.getNode()))
        return DAG.getNode(ISD::INSERT_SUBVECTOR, dl, OpVT,
                           getZeroVector(OpVT, Subtarget, DAG, dl), SubVec2,
                           Vec.getOperand(2));

      // If we are inserting into both halves of the vector, the starting
      // vector should be undef. If it isn't, make it so. Only do this if the
      // the early insert has no other uses.
      // TODO: Should this be a generic DAG combine?
      if (!Vec.getOperand(0).isUndef() && Vec.hasOneUse()) {
        Vec = DAG.getNode(ISD::INSERT_SUBVECTOR, dl, OpVT, DAG.getUNDEF(OpVT),
                          SubVec2, Vec.getOperand(2));
        DCI.AddToWorklist(Vec.getNode());
        return DAG.getNode(ISD::INSERT_SUBVECTOR, dl, OpVT, Vec, SubVec,
                           N->getOperand(2));

      }
    }
  }

  return SDValue();
}

static SDValue combineExtractSubvector(SDNode *N, SelectionDAG &DAG,
                                       TargetLowering::DAGCombinerInfo &DCI,
                                       const X86Subtarget &Subtarget) {
  if (DCI.isBeforeLegalizeOps())
    return SDValue();

  MVT OpVT = N->getSimpleValueType(0);
  SDValue InVec = N->getOperand(0);
  unsigned IdxVal = cast<ConstantSDNode>(N->getOperand(1))->getZExtValue();

  if (ISD::isBuildVectorAllZeros(InVec.getNode()))
    return getZeroVector(OpVT, Subtarget, DAG, SDLoc(N));

  if (ISD::isBuildVectorAllOnes(InVec.getNode())) {
    if (OpVT.getScalarType() == MVT::i1)
      return DAG.getConstant(1, SDLoc(N), OpVT);
    return getOnesVector(OpVT, DAG, SDLoc(N));
  }

  if (InVec.getOpcode() == ISD::BUILD_VECTOR)
    return DAG.getBuildVector(
        OpVT, SDLoc(N),
        InVec.getNode()->ops().slice(IdxVal, OpVT.getVectorNumElements()));

  return SDValue();
}

SDValue X86TargetLowering::PerformDAGCombine(SDNode *N,
                                             DAGCombinerInfo &DCI) const {
  SelectionDAG &DAG = DCI.DAG;
  switch (N->getOpcode()) {
  default: break;
  case ISD::EXTRACT_VECTOR_ELT:
  case X86ISD::PEXTRW:
  case X86ISD::PEXTRB:
    return combineExtractVectorElt(N, DAG, DCI, Subtarget);
  case ISD::INSERT_SUBVECTOR:
    return combineInsertSubvector(N, DAG, DCI, Subtarget);
  case ISD::EXTRACT_SUBVECTOR:
    return combineExtractSubvector(N, DAG, DCI, Subtarget);
  case ISD::VSELECT:
  case ISD::SELECT:
  case X86ISD::SHRUNKBLEND: return combineSelect(N, DAG, DCI, Subtarget);
  case ISD::BITCAST:        return combineBitcast(N, DAG, DCI, Subtarget);
  case X86ISD::CMOV:        return combineCMov(N, DAG, DCI, Subtarget);
  case ISD::ADD:            return combineAdd(N, DAG, Subtarget);
  case ISD::SUB:            return combineSub(N, DAG, Subtarget);
  case X86ISD::SBB:         return combineSBB(N, DAG);
  case X86ISD::ADC:         return combineADC(N, DAG, DCI);
  case ISD::MUL:            return combineMul(N, DAG, DCI, Subtarget);
  case ISD::SHL:
  case ISD::SRA:
  case ISD::SRL:            return combineShift(N, DAG, DCI, Subtarget);
  case ISD::AND:            return combineAnd(N, DAG, DCI, Subtarget);
  case ISD::OR:             return combineOr(N, DAG, DCI, Subtarget);
  case ISD::XOR:            return combineXor(N, DAG, DCI, Subtarget);
  case ISD::LOAD:           return combineLoad(N, DAG, DCI, Subtarget);
  case ISD::MLOAD:          return combineMaskedLoad(N, DAG, DCI, Subtarget);
  case ISD::STORE:          return combineStore(N, DAG, Subtarget);
  case ISD::MSTORE:         return combineMaskedStore(N, DAG, Subtarget);
  case ISD::SINT_TO_FP:     return combineSIntToFP(N, DAG, Subtarget);
  case ISD::UINT_TO_FP:     return combineUIntToFP(N, DAG, Subtarget);
  case ISD::FADD:
  case ISD::FSUB:           return combineFaddFsub(N, DAG, Subtarget);
  case ISD::FNEG:           return combineFneg(N, DAG, Subtarget);
  case ISD::TRUNCATE:       return combineTruncate(N, DAG, Subtarget);
  case X86ISD::ANDNP:       return combineAndnp(N, DAG, DCI, Subtarget);
  case X86ISD::FAND:        return combineFAnd(N, DAG, Subtarget);
  case X86ISD::FANDN:       return combineFAndn(N, DAG, Subtarget);
  case X86ISD::FXOR:
  case X86ISD::FOR:         return combineFOr(N, DAG, Subtarget);
  case X86ISD::FMIN:
  case X86ISD::FMAX:        return combineFMinFMax(N, DAG);
  case ISD::FMINNUM:
  case ISD::FMAXNUM:        return combineFMinNumFMaxNum(N, DAG, Subtarget);
  case X86ISD::BT:          return combineBT(N, DAG, DCI);
  case ISD::ANY_EXTEND:
  case ISD::ZERO_EXTEND:    return combineZext(N, DAG, DCI, Subtarget);
  case ISD::SIGN_EXTEND:    return combineSext(N, DAG, DCI, Subtarget);
  case ISD::SIGN_EXTEND_INREG: return combineSignExtendInReg(N, DAG, Subtarget);
  case ISD::SETCC:          return combineSetCC(N, DAG, Subtarget);
  case X86ISD::SETCC:       return combineX86SetCC(N, DAG, Subtarget);
  case X86ISD::BRCOND:      return combineBrCond(N, DAG, Subtarget);
  case X86ISD::PACKSS:
  case X86ISD::PACKUS:      return combineVectorPack(N, DAG, DCI, Subtarget);
  case X86ISD::VSHLI:
  case X86ISD::VSRAI:
  case X86ISD::VSRLI:
    return combineVectorShiftImm(N, DAG, DCI, Subtarget);
  case ISD::SIGN_EXTEND_VECTOR_INREG:
  case ISD::ZERO_EXTEND_VECTOR_INREG:
  case X86ISD::VSEXT:
  case X86ISD::VZEXT:       return combineVSZext(N, DAG, DCI, Subtarget);
  case X86ISD::PINSRB:
  case X86ISD::PINSRW:      return combineVectorInsert(N, DAG, DCI, Subtarget);
  case X86ISD::SHUFP:       // Handle all target specific shuffles
  case X86ISD::INSERTPS:
  case X86ISD::EXTRQI:
  case X86ISD::INSERTQI:
  case X86ISD::PALIGNR:
  case X86ISD::VSHLDQ:
  case X86ISD::VSRLDQ:
  case X86ISD::BLENDI:
  case X86ISD::UNPCKH:
  case X86ISD::UNPCKL:
  case X86ISD::MOVHLPS:
  case X86ISD::MOVLHPS:
  case X86ISD::PSHUFB:
  case X86ISD::PSHUFD:
  case X86ISD::PSHUFHW:
  case X86ISD::PSHUFLW:
  case X86ISD::MOVSHDUP:
  case X86ISD::MOVSLDUP:
  case X86ISD::MOVDDUP:
  case X86ISD::MOVSS:
  case X86ISD::MOVSD:
  case X86ISD::VBROADCAST:
  case X86ISD::VPPERM:
  case X86ISD::VPERMI:
  case X86ISD::VPERMV:
  case X86ISD::VPERMV3:
  case X86ISD::VPERMIV3:
  case X86ISD::VPERMIL2:
  case X86ISD::VPERMILPI:
  case X86ISD::VPERMILPV:
  case X86ISD::VPERM2X128:
  case X86ISD::VZEXT_MOVL:
  case ISD::VECTOR_SHUFFLE: return combineShuffle(N, DAG, DCI,Subtarget);
  case X86ISD::FMADD_RND:
  case X86ISD::FMADDS1_RND:
  case X86ISD::FMADDS3_RND:
  case X86ISD::FMADDS1:
  case X86ISD::FMADDS3:
  case ISD::FMA:            return combineFMA(N, DAG, Subtarget);
  case ISD::MGATHER:
  case ISD::MSCATTER:       return combineGatherScatter(N, DAG);
  case X86ISD::TESTM:       return combineTestM(N, DAG, Subtarget);
  case X86ISD::PCMPEQ:
  case X86ISD::PCMPGT:      return combineVectorCompare(N, DAG, Subtarget);
  }

  return SDValue();
}

/// Return true if the target has native support for the specified value type
/// and it is 'desirable' to use the type for the given node type. e.g. On x86
/// i16 is legal, but undesirable since i16 instruction encodings are longer and
/// some i16 instructions are slow.
bool X86TargetLowering::isTypeDesirableForOp(unsigned Opc, EVT VT) const {
  if (!isTypeLegal(VT))
    return false;
  if (VT != MVT::i16)
    return true;

  switch (Opc) {
  default:
    return true;
  case ISD::LOAD:
  case ISD::SIGN_EXTEND:
  case ISD::ZERO_EXTEND:
  case ISD::ANY_EXTEND:
  case ISD::SHL:
  case ISD::SRL:
  case ISD::SUB:
  case ISD::ADD:
  case ISD::MUL:
  case ISD::AND:
  case ISD::OR:
  case ISD::XOR:
    return false;
  }
}

/// This function checks if any of the users of EFLAGS copies the EFLAGS. We
/// know that the code that lowers COPY of EFLAGS has to use the stack, and if
/// we don't adjust the stack we clobber the first frame index.
/// See X86InstrInfo::copyPhysReg.
static bool hasCopyImplyingStackAdjustment(const MachineFunction &MF) {
  const MachineRegisterInfo &MRI = MF.getRegInfo();
  return any_of(MRI.reg_instructions(X86::EFLAGS),
                [](const MachineInstr &RI) { return RI.isCopy(); });
}

void X86TargetLowering::finalizeLowering(MachineFunction &MF) const {
  if (hasCopyImplyingStackAdjustment(MF)) {
    MachineFrameInfo &MFI = MF.getFrameInfo();
    MFI.setHasCopyImplyingStackAdjustment(true);
  }

  TargetLoweringBase::finalizeLowering(MF);
}

/// This method query the target whether it is beneficial for dag combiner to
/// promote the specified node. If true, it should return the desired promotion
/// type by reference.
bool X86TargetLowering::IsDesirableToPromoteOp(SDValue Op, EVT &PVT) const {
  EVT VT = Op.getValueType();
  if (VT != MVT::i16)
    return false;

  bool Promote = false;
  bool Commute = false;
  switch (Op.getOpcode()) {
  default: break;
  case ISD::SIGN_EXTEND:
  case ISD::ZERO_EXTEND:
  case ISD::ANY_EXTEND:
    Promote = true;
    break;
  case ISD::SHL:
  case ISD::SRL: {
    SDValue N0 = Op.getOperand(0);
    // Look out for (store (shl (load), x)).
    if (MayFoldLoad(N0) && MayFoldIntoStore(Op))
      return false;
    Promote = true;
    break;
  }
  case ISD::ADD:
  case ISD::MUL:
  case ISD::AND:
  case ISD::OR:
  case ISD::XOR:
    Commute = true;
    LLVM_FALLTHROUGH;
  case ISD::SUB: {
    SDValue N0 = Op.getOperand(0);
    SDValue N1 = Op.getOperand(1);
    if (!Commute && MayFoldLoad(N1))
      return false;
    // Avoid disabling potential load folding opportunities.
    if (MayFoldLoad(N0) && (!isa<ConstantSDNode>(N1) || MayFoldIntoStore(Op)))
      return false;
    if (MayFoldLoad(N1) && (!isa<ConstantSDNode>(N0) || MayFoldIntoStore(Op)))
      return false;
    Promote = true;
  }
  }

  PVT = MVT::i32;
  return Promote;
}

bool X86TargetLowering::
    isDesirableToCombineBuildVectorToShuffleTruncate(
        ArrayRef<int> ShuffleMask, EVT SrcVT, EVT TruncVT) const {

  assert(SrcVT.getVectorNumElements() == ShuffleMask.size() &&
         "Element count mismatch");
  assert(
      Subtarget.getTargetLowering()->isShuffleMaskLegal(ShuffleMask, SrcVT) &&
      "Shuffle Mask expected to be legal");

  // For 32-bit elements VPERMD is better than shuffle+truncate.
  // TODO: After we improve lowerBuildVector, add execption for VPERMW.
  if (SrcVT.getScalarSizeInBits() == 32 || !Subtarget.hasAVX2())
    return false;

  if (is128BitLaneCrossingShuffleMask(SrcVT.getSimpleVT(), ShuffleMask))
    return false;

  return true;
}

//===----------------------------------------------------------------------===//
//                           X86 Inline Assembly Support
//===----------------------------------------------------------------------===//

// Helper to match a string separated by whitespace.
static bool matchAsm(StringRef S, ArrayRef<const char *> Pieces) {
  S = S.substr(S.find_first_not_of(" \t")); // Skip leading whitespace.

  for (StringRef Piece : Pieces) {
    if (!S.startswith(Piece)) // Check if the piece matches.
      return false;

    S = S.substr(Piece.size());
    StringRef::size_type Pos = S.find_first_not_of(" \t");
    if (Pos == 0) // We matched a prefix.
      return false;

    S = S.substr(Pos);
  }

  return S.empty();
}

static bool clobbersFlagRegisters(const SmallVector<StringRef, 4> &AsmPieces) {

  if (AsmPieces.size() == 3 || AsmPieces.size() == 4) {
    if (std::count(AsmPieces.begin(), AsmPieces.end(), "~{cc}") &&
        std::count(AsmPieces.begin(), AsmPieces.end(), "~{flags}") &&
        std::count(AsmPieces.begin(), AsmPieces.end(), "~{fpsr}")) {

      if (AsmPieces.size() == 3)
        return true;
      else if (std::count(AsmPieces.begin(), AsmPieces.end(), "~{dirflag}"))
        return true;
    }
  }
  return false;
}

bool X86TargetLowering::ExpandInlineAsm(CallInst *CI) const {
  InlineAsm *IA = cast<InlineAsm>(CI->getCalledValue());

  const std::string &AsmStr = IA->getAsmString();

  IntegerType *Ty = dyn_cast<IntegerType>(CI->getType());
  if (!Ty || Ty->getBitWidth() % 16 != 0)
    return false;

  // TODO: should remove alternatives from the asmstring: "foo {a|b}" -> "foo a"
  SmallVector<StringRef, 4> AsmPieces;
  SplitString(AsmStr, AsmPieces, ";\n");

  switch (AsmPieces.size()) {
  default: return false;
  case 1:
    // FIXME: this should verify that we are targeting a 486 or better.  If not,
    // we will turn this bswap into something that will be lowered to logical
    // ops instead of emitting the bswap asm.  For now, we don't support 486 or
    // lower so don't worry about this.
    // bswap $0
    if (matchAsm(AsmPieces[0], {"bswap", "$0"}) ||
        matchAsm(AsmPieces[0], {"bswapl", "$0"}) ||
        matchAsm(AsmPieces[0], {"bswapq", "$0"}) ||
        matchAsm(AsmPieces[0], {"bswap", "${0:q}"}) ||
        matchAsm(AsmPieces[0], {"bswapl", "${0:q}"}) ||
        matchAsm(AsmPieces[0], {"bswapq", "${0:q}"})) {
      // No need to check constraints, nothing other than the equivalent of
      // "=r,0" would be valid here.
      return IntrinsicLowering::LowerToByteSwap(CI);
    }

    // rorw $$8, ${0:w}  -->  llvm.bswap.i16
    if (CI->getType()->isIntegerTy(16) &&
        IA->getConstraintString().compare(0, 5, "=r,0,") == 0 &&
        (matchAsm(AsmPieces[0], {"rorw", "$$8,", "${0:w}"}) ||
         matchAsm(AsmPieces[0], {"rolw", "$$8,", "${0:w}"}))) {
      AsmPieces.clear();
      StringRef ConstraintsStr = IA->getConstraintString();
      SplitString(StringRef(ConstraintsStr).substr(5), AsmPieces, ",");
      array_pod_sort(AsmPieces.begin(), AsmPieces.end());
      if (clobbersFlagRegisters(AsmPieces))
        return IntrinsicLowering::LowerToByteSwap(CI);
    }
    break;
  case 3:
    if (CI->getType()->isIntegerTy(32) &&
        IA->getConstraintString().compare(0, 5, "=r,0,") == 0 &&
        matchAsm(AsmPieces[0], {"rorw", "$$8,", "${0:w}"}) &&
        matchAsm(AsmPieces[1], {"rorl", "$$16,", "$0"}) &&
        matchAsm(AsmPieces[2], {"rorw", "$$8,", "${0:w}"})) {
      AsmPieces.clear();
      StringRef ConstraintsStr = IA->getConstraintString();
      SplitString(StringRef(ConstraintsStr).substr(5), AsmPieces, ",");
      array_pod_sort(AsmPieces.begin(), AsmPieces.end());
      if (clobbersFlagRegisters(AsmPieces))
        return IntrinsicLowering::LowerToByteSwap(CI);
    }

    if (CI->getType()->isIntegerTy(64)) {
      InlineAsm::ConstraintInfoVector Constraints = IA->ParseConstraints();
      if (Constraints.size() >= 2 &&
          Constraints[0].Codes.size() == 1 && Constraints[0].Codes[0] == "A" &&
          Constraints[1].Codes.size() == 1 && Constraints[1].Codes[0] == "0") {
        // bswap %eax / bswap %edx / xchgl %eax, %edx  -> llvm.bswap.i64
        if (matchAsm(AsmPieces[0], {"bswap", "%eax"}) &&
            matchAsm(AsmPieces[1], {"bswap", "%edx"}) &&
            matchAsm(AsmPieces[2], {"xchgl", "%eax,", "%edx"}))
          return IntrinsicLowering::LowerToByteSwap(CI);
      }
    }
    break;
  }
  return false;
}

/// Given a constraint letter, return the type of constraint for this target.
X86TargetLowering::ConstraintType
X86TargetLowering::getConstraintType(StringRef Constraint) const {
  if (Constraint.size() == 1) {
    switch (Constraint[0]) {
    case 'R':
    case 'q':
    case 'Q':
    case 'f':
    case 't':
    case 'u':
    case 'y':
    case 'x':
    case 'v':
    case 'Y':
    case 'l':
    case 'k': // AVX512 masking registers.
      return C_RegisterClass;
    case 'a':
    case 'b':
    case 'c':
    case 'd':
    case 'S':
    case 'D':
    case 'A':
      return C_Register;
    case 'I':
    case 'J':
    case 'K':
    case 'L':
    case 'M':
    case 'N':
    case 'G':
    case 'C':
    case 'e':
    case 'Z':
      return C_Other;
    default:
      break;
    }
  }
  else if (Constraint.size() == 2) {
    switch (Constraint[0]) {
    default:
      break;
    case 'Y':
      switch (Constraint[1]) {
      default:
        break;
      case 'z':
      case '0':
        return C_Register;
      case 'i':
      case 'm':
      case 'k':
      case 't':
      case '2':
        return C_RegisterClass;
      }
    }
  }
  return TargetLowering::getConstraintType(Constraint);
}

/// Examine constraint type and operand type and determine a weight value.
/// This object must already have been set up with the operand type
/// and the current alternative constraint selected.
TargetLowering::ConstraintWeight
  X86TargetLowering::getSingleConstraintMatchWeight(
    AsmOperandInfo &info, const char *constraint) const {
  ConstraintWeight weight = CW_Invalid;
  Value *CallOperandVal = info.CallOperandVal;
    // If we don't have a value, we can't do a match,
    // but allow it at the lowest weight.
  if (!CallOperandVal)
    return CW_Default;
  Type *type = CallOperandVal->getType();
  // Look at the constraint type.
  switch (*constraint) {
  default:
    weight = TargetLowering::getSingleConstraintMatchWeight(info, constraint);
    LLVM_FALLTHROUGH;
  case 'R':
  case 'q':
  case 'Q':
  case 'a':
  case 'b':
  case 'c':
  case 'd':
  case 'S':
  case 'D':
  case 'A':
    if (CallOperandVal->getType()->isIntegerTy())
      weight = CW_SpecificReg;
    break;
  case 'f':
  case 't':
  case 'u':
    if (type->isFloatingPointTy())
      weight = CW_SpecificReg;
    break;
  case 'y':
    if (type->isX86_MMXTy() && Subtarget.hasMMX())
      weight = CW_SpecificReg;
    break;
  case 'Y': {
    unsigned Size = StringRef(constraint).size();
    // Pick 'i' as the next char as 'Yi' and 'Y' are synonymous, when matching 'Y'
    char NextChar = Size == 2 ? constraint[1] : 'i';
    if (Size > 2)
      break;
    switch (NextChar) {
      default:
        return CW_Invalid;
      // XMM0
      case 'z':
      case '0':
        if ((type->getPrimitiveSizeInBits() == 128) && Subtarget.hasSSE1())
          return CW_SpecificReg;
        return CW_Invalid;
      // Conditional OpMask regs (AVX512)
      case 'k':
        if ((type->getPrimitiveSizeInBits() == 64) && Subtarget.hasAVX512())
          return CW_Register;
        return CW_Invalid;
      // Any MMX reg
      case 'm':
        if (type->isX86_MMXTy() && Subtarget.hasMMX())
          return weight;
        return CW_Invalid;
      // Any SSE reg when ISA >= SSE2, same as 'Y'
      case 'i':
      case 't':
      case '2':
        if (!Subtarget.hasSSE2())
          return CW_Invalid;
        break;
    }
    // Fall through (handle "Y" constraint).
    LLVM_FALLTHROUGH;
  }
  case 'v':
    if ((type->getPrimitiveSizeInBits() == 512) && Subtarget.hasAVX512())
      weight = CW_Register;
    LLVM_FALLTHROUGH;
  case 'x':
    if (((type->getPrimitiveSizeInBits() == 128) && Subtarget.hasSSE1()) ||
        ((type->getPrimitiveSizeInBits() == 256) && Subtarget.hasFp256()))
      weight = CW_Register;
    break;
  case 'k':
    // Enable conditional vector operations using %k<#> registers.
    if ((type->getPrimitiveSizeInBits() == 64) && Subtarget.hasAVX512())
      weight = CW_Register;
    break;
  case 'I':
    if (ConstantInt *C = dyn_cast<ConstantInt>(info.CallOperandVal)) {
      if (C->getZExtValue() <= 31)
        weight = CW_Constant;
    }
    break;
  case 'J':
    if (ConstantInt *C = dyn_cast<ConstantInt>(CallOperandVal)) {
      if (C->getZExtValue() <= 63)
        weight = CW_Constant;
    }
    break;
  case 'K':
    if (ConstantInt *C = dyn_cast<ConstantInt>(CallOperandVal)) {
      if ((C->getSExtValue() >= -0x80) && (C->getSExtValue() <= 0x7f))
        weight = CW_Constant;
    }
    break;
  case 'L':
    if (ConstantInt *C = dyn_cast<ConstantInt>(CallOperandVal)) {
      if ((C->getZExtValue() == 0xff) || (C->getZExtValue() == 0xffff))
        weight = CW_Constant;
    }
    break;
  case 'M':
    if (ConstantInt *C = dyn_cast<ConstantInt>(CallOperandVal)) {
      if (C->getZExtValue() <= 3)
        weight = CW_Constant;
    }
    break;
  case 'N':
    if (ConstantInt *C = dyn_cast<ConstantInt>(CallOperandVal)) {
      if (C->getZExtValue() <= 0xff)
        weight = CW_Constant;
    }
    break;
  case 'G':
  case 'C':
    if (isa<ConstantFP>(CallOperandVal)) {
      weight = CW_Constant;
    }
    break;
  case 'e':
    if (ConstantInt *C = dyn_cast<ConstantInt>(CallOperandVal)) {
      if ((C->getSExtValue() >= -0x80000000LL) &&
          (C->getSExtValue() <= 0x7fffffffLL))
        weight = CW_Constant;
    }
    break;
  case 'Z':
    if (ConstantInt *C = dyn_cast<ConstantInt>(CallOperandVal)) {
      if (C->getZExtValue() <= 0xffffffff)
        weight = CW_Constant;
    }
    break;
  }
  return weight;
}

/// Try to replace an X constraint, which matches anything, with another that
/// has more specific requirements based on the type of the corresponding
/// operand.
const char *X86TargetLowering::
LowerXConstraint(EVT ConstraintVT) const {
  // FP X constraints get lowered to SSE1/2 registers if available, otherwise
  // 'f' like normal targets.
  if (ConstraintVT.isFloatingPoint()) {
    if (Subtarget.hasSSE2())
      return "Y";
    if (Subtarget.hasSSE1())
      return "x";
  }

  return TargetLowering::LowerXConstraint(ConstraintVT);
}

/// Lower the specified operand into the Ops vector.
/// If it is invalid, don't add anything to Ops.
void X86TargetLowering::LowerAsmOperandForConstraint(SDValue Op,
                                                     std::string &Constraint,
                                                     std::vector<SDValue>&Ops,
                                                     SelectionDAG &DAG) const {
  SDValue Result;

  // Only support length 1 constraints for now.
  if (Constraint.length() > 1) return;

  char ConstraintLetter = Constraint[0];
  switch (ConstraintLetter) {
  default: break;
  case 'I':
    if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op)) {
      if (C->getZExtValue() <= 31) {
        Result = DAG.getTargetConstant(C->getZExtValue(), SDLoc(Op),
                                       Op.getValueType());
        break;
      }
    }
    return;
  case 'J':
    if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op)) {
      if (C->getZExtValue() <= 63) {
        Result = DAG.getTargetConstant(C->getZExtValue(), SDLoc(Op),
                                       Op.getValueType());
        break;
      }
    }
    return;
  case 'K':
    if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op)) {
      if (isInt<8>(C->getSExtValue())) {
        Result = DAG.getTargetConstant(C->getZExtValue(), SDLoc(Op),
                                       Op.getValueType());
        break;
      }
    }
    return;
  case 'L':
    if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op)) {
      if (C->getZExtValue() == 0xff || C->getZExtValue() == 0xffff ||
          (Subtarget.is64Bit() && C->getZExtValue() == 0xffffffff)) {
        Result = DAG.getTargetConstant(C->getSExtValue(), SDLoc(Op),
                                       Op.getValueType());
        break;
      }
    }
    return;
  case 'M':
    if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op)) {
      if (C->getZExtValue() <= 3) {
        Result = DAG.getTargetConstant(C->getZExtValue(), SDLoc(Op),
                                       Op.getValueType());
        break;
      }
    }
    return;
  case 'N':
    if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op)) {
      if (C->getZExtValue() <= 255) {
        Result = DAG.getTargetConstant(C->getZExtValue(), SDLoc(Op),
                                       Op.getValueType());
        break;
      }
    }
    return;
  case 'O':
    if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op)) {
      if (C->getZExtValue() <= 127) {
        Result = DAG.getTargetConstant(C->getZExtValue(), SDLoc(Op),
                                       Op.getValueType());
        break;
      }
    }
    return;
  case 'e': {
    // 32-bit signed value
    if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op)) {
      if (ConstantInt::isValueValidForType(Type::getInt32Ty(*DAG.getContext()),
                                           C->getSExtValue())) {
        // Widen to 64 bits here to get it sign extended.
        Result = DAG.getTargetConstant(C->getSExtValue(), SDLoc(Op), MVT::i64);
        break;
      }
    // FIXME gcc accepts some relocatable values here too, but only in certain
    // memory models; it's complicated.
    }
    return;
  }
  case 'Z': {
    // 32-bit unsigned value
    if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op)) {
      if (ConstantInt::isValueValidForType(Type::getInt32Ty(*DAG.getContext()),
                                           C->getZExtValue())) {
        Result = DAG.getTargetConstant(C->getZExtValue(), SDLoc(Op),
                                       Op.getValueType());
        break;
      }
    }
    // FIXME gcc accepts some relocatable values here too, but only in certain
    // memory models; it's complicated.
    return;
  }
  case 'i': {
    // Literal immediates are always ok.
    if (ConstantSDNode *CST = dyn_cast<ConstantSDNode>(Op)) {
      // Widen to 64 bits here to get it sign extended.
      Result = DAG.getTargetConstant(CST->getSExtValue(), SDLoc(Op), MVT::i64);
      break;
    }

    // In any sort of PIC mode addresses need to be computed at runtime by
    // adding in a register or some sort of table lookup.  These can't
    // be used as immediates.
    if (Subtarget.isPICStyleGOT() || Subtarget.isPICStyleStubPIC())
      return;

    // If we are in non-pic codegen mode, we allow the address of a global (with
    // an optional displacement) to be used with 'i'.
    GlobalAddressSDNode *GA = nullptr;
    int64_t Offset = 0;

    // Match either (GA), (GA+C), (GA+C1+C2), etc.
    while (1) {
      if ((GA = dyn_cast<GlobalAddressSDNode>(Op))) {
        Offset += GA->getOffset();
        break;
      } else if (Op.getOpcode() == ISD::ADD) {
        if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op.getOperand(1))) {
          Offset += C->getZExtValue();
          Op = Op.getOperand(0);
          continue;
        }
      } else if (Op.getOpcode() == ISD::SUB) {
        if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op.getOperand(1))) {
          Offset += -C->getZExtValue();
          Op = Op.getOperand(0);
          continue;
        }
      }

      // Otherwise, this isn't something we can handle, reject it.
      return;
    }

    const GlobalValue *GV = GA->getGlobal();
    // If we require an extra load to get this address, as in PIC mode, we
    // can't accept it.
    if (isGlobalStubReference(Subtarget.classifyGlobalReference(GV)))
      return;

    Result = DAG.getTargetGlobalAddress(GV, SDLoc(Op),
                                        GA->getValueType(0), Offset);
    break;
  }
  }

  if (Result.getNode()) {
    Ops.push_back(Result);
    return;
  }
  return TargetLowering::LowerAsmOperandForConstraint(Op, Constraint, Ops, DAG);
}

/// Check if \p RC is a general purpose register class.
/// I.e., GR* or one of their variant.
static bool isGRClass(const TargetRegisterClass &RC) {
  return RC.hasSuperClassEq(&X86::GR8RegClass) ||
         RC.hasSuperClassEq(&X86::GR16RegClass) ||
         RC.hasSuperClassEq(&X86::GR32RegClass) ||
         RC.hasSuperClassEq(&X86::GR64RegClass) ||
         RC.hasSuperClassEq(&X86::LOW32_ADDR_ACCESS_RBPRegClass);
}

/// Check if \p RC is a vector register class.
/// I.e., FR* / VR* or one of their variant.
static bool isFRClass(const TargetRegisterClass &RC) {
  return RC.hasSuperClassEq(&X86::FR32XRegClass) ||
         RC.hasSuperClassEq(&X86::FR64XRegClass) ||
         RC.hasSuperClassEq(&X86::VR128XRegClass) ||
         RC.hasSuperClassEq(&X86::VR256XRegClass) ||
         RC.hasSuperClassEq(&X86::VR512RegClass);
}

std::pair<unsigned, const TargetRegisterClass *>
X86TargetLowering::getRegForInlineAsmConstraint(const TargetRegisterInfo *TRI,
                                                StringRef Constraint,
                                                MVT VT) const {
  // First, see if this is a constraint that directly corresponds to an LLVM
  // register class.
  if (Constraint.size() == 1) {
    // GCC Constraint Letters
    switch (Constraint[0]) {
    default: break;
      // TODO: Slight differences here in allocation order and leaving
      // RIP in the class. Do they matter any more here than they do
      // in the normal allocation?
    case 'k':
      if (Subtarget.hasAVX512()) {
        //  Only supported in AVX512 or later.
        switch (VT.SimpleTy) {
        default: break;
        case MVT::i32:
          return std::make_pair(0U, &X86::VK32RegClass);
        case MVT::i16:
          return std::make_pair(0U, &X86::VK16RegClass);
        case MVT::i8:
          return std::make_pair(0U, &X86::VK8RegClass);
        case MVT::i1:
          return std::make_pair(0U, &X86::VK1RegClass);
        case MVT::i64:
          return std::make_pair(0U, &X86::VK64RegClass);
        }
      }
      break;
    case 'q':   // GENERAL_REGS in 64-bit mode, Q_REGS in 32-bit mode.
      if (Subtarget.is64Bit()) {
        if (VT == MVT::i32 || VT == MVT::f32)
          return std::make_pair(0U, &X86::GR32RegClass);
        if (VT == MVT::i16)
          return std::make_pair(0U, &X86::GR16RegClass);
        if (VT == MVT::i8 || VT == MVT::i1)
          return std::make_pair(0U, &X86::GR8RegClass);
        if (VT == MVT::i64 || VT == MVT::f64)
          return std::make_pair(0U, &X86::GR64RegClass);
        break;
      }
      LLVM_FALLTHROUGH;
      // 32-bit fallthrough
    case 'Q':   // Q_REGS
      if (VT == MVT::i32 || VT == MVT::f32)
        return std::make_pair(0U, &X86::GR32_ABCDRegClass);
      if (VT == MVT::i16)
        return std::make_pair(0U, &X86::GR16_ABCDRegClass);
      if (VT == MVT::i8 || VT == MVT::i1)
        return std::make_pair(0U, &X86::GR8_ABCD_LRegClass);
      if (VT == MVT::i64)
        return std::make_pair(0U, &X86::GR64_ABCDRegClass);
      break;
    case 'r':   // GENERAL_REGS
    case 'l':   // INDEX_REGS
      if (VT == MVT::i8 || VT == MVT::i1)
        return std::make_pair(0U, &X86::GR8RegClass);
      if (VT == MVT::i16)
        return std::make_pair(0U, &X86::GR16RegClass);
      if (VT == MVT::i32 || VT == MVT::f32 || !Subtarget.is64Bit())
        return std::make_pair(0U, &X86::GR32RegClass);
      return std::make_pair(0U, &X86::GR64RegClass);
    case 'R':   // LEGACY_REGS
      if (VT == MVT::i8 || VT == MVT::i1)
        return std::make_pair(0U, &X86::GR8_NOREXRegClass);
      if (VT == MVT::i16)
        return std::make_pair(0U, &X86::GR16_NOREXRegClass);
      if (VT == MVT::i32 || !Subtarget.is64Bit())
        return std::make_pair(0U, &X86::GR32_NOREXRegClass);
      return std::make_pair(0U, &X86::GR64_NOREXRegClass);
    case 'f':  // FP Stack registers.
      // If SSE is enabled for this VT, use f80 to ensure the isel moves the
      // value to the correct fpstack register class.
      if (VT == MVT::f32 && !isScalarFPTypeInSSEReg(VT))
        return std::make_pair(0U, &X86::RFP32RegClass);
      if (VT == MVT::f64 && !isScalarFPTypeInSSEReg(VT))
        return std::make_pair(0U, &X86::RFP64RegClass);
      return std::make_pair(0U, &X86::RFP80RegClass);
    case 'y':   // MMX_REGS if MMX allowed.
      if (!Subtarget.hasMMX()) break;
      return std::make_pair(0U, &X86::VR64RegClass);
    case 'Y':   // SSE_REGS if SSE2 allowed
      if (!Subtarget.hasSSE2()) break;
      LLVM_FALLTHROUGH;
    case 'v':
    case 'x':   // SSE_REGS if SSE1 allowed or AVX_REGS if AVX allowed
      if (!Subtarget.hasSSE1()) break;
      bool VConstraint = (Constraint[0] == 'v');

      switch (VT.SimpleTy) {
      default: break;
      // Scalar SSE types.
      case MVT::f32:
      case MVT::i32:
        if (VConstraint && Subtarget.hasAVX512() && Subtarget.hasVLX())
          return std::make_pair(0U, &X86::FR32XRegClass);
        return std::make_pair(0U, &X86::FR32RegClass);
      case MVT::f64:
      case MVT::i64:
        if (VConstraint && Subtarget.hasVLX())
          return std::make_pair(0U, &X86::FR64XRegClass);
        return std::make_pair(0U, &X86::FR64RegClass);
      // TODO: Handle f128 and i128 in FR128RegClass after it is tested well.
      // Vector types.
      case MVT::v16i8:
      case MVT::v8i16:
      case MVT::v4i32:
      case MVT::v2i64:
      case MVT::v4f32:
      case MVT::v2f64:
        if (VConstraint && Subtarget.hasVLX())
          return std::make_pair(0U, &X86::VR128XRegClass);
        return std::make_pair(0U, &X86::VR128RegClass);
      // AVX types.
      case MVT::v32i8:
      case MVT::v16i16:
      case MVT::v8i32:
      case MVT::v4i64:
      case MVT::v8f32:
      case MVT::v4f64:
        if (VConstraint && Subtarget.hasVLX())
          return std::make_pair(0U, &X86::VR256XRegClass);
        return std::make_pair(0U, &X86::VR256RegClass);
      case MVT::v8f64:
      case MVT::v16f32:
      case MVT::v16i32:
      case MVT::v8i64:
        return std::make_pair(0U, &X86::VR512RegClass);
      }
      break;
    }
  } else if (Constraint.size() == 2 && Constraint[0] == 'Y') {
    switch (Constraint[1]) {
    default:
      break;
    case 'i':
    case 't':
    case '2':
      return getRegForInlineAsmConstraint(TRI, "Y", VT);
    case 'm':
      if (!Subtarget.hasMMX()) break;
      return std::make_pair(0U, &X86::VR64RegClass);
    case 'z':
    case '0':
      if (!Subtarget.hasSSE1()) break;
      return std::make_pair(X86::XMM0, &X86::VR128RegClass);
    case 'k':
      // This register class doesn't allocate k0 for masked vector operation.
      if (Subtarget.hasAVX512()) { // Only supported in AVX512.
        switch (VT.SimpleTy) {
        default: break;
        case MVT::i32:
          return std::make_pair(0U, &X86::VK32WMRegClass);
        case MVT::i16:
          return std::make_pair(0U, &X86::VK16WMRegClass);
        case MVT::i8:
          return std::make_pair(0U, &X86::VK8WMRegClass);
        case MVT::i1:
          return std::make_pair(0U, &X86::VK1WMRegClass);
        case MVT::i64:
          return std::make_pair(0U, &X86::VK64WMRegClass);
        }
      }
      break;
    }
  }

  // Use the default implementation in TargetLowering to convert the register
  // constraint into a member of a register class.
  std::pair<unsigned, const TargetRegisterClass*> Res;
  Res = TargetLowering::getRegForInlineAsmConstraint(TRI, Constraint, VT);

  // Not found as a standard register?
  if (!Res.second) {
    // Map st(0) -> st(7) -> ST0
    if (Constraint.size() == 7 && Constraint[0] == '{' &&
        tolower(Constraint[1]) == 's' &&
        tolower(Constraint[2]) == 't' &&
        Constraint[3] == '(' &&
        (Constraint[4] >= '0' && Constraint[4] <= '7') &&
        Constraint[5] == ')' &&
        Constraint[6] == '}') {

      Res.first = X86::FP0+Constraint[4]-'0';
      Res.second = &X86::RFP80RegClass;
      return Res;
    }

    // GCC allows "st(0)" to be called just plain "st".
    if (StringRef("{st}").equals_lower(Constraint)) {
      Res.first = X86::FP0;
      Res.second = &X86::RFP80RegClass;
      return Res;
    }

    // flags -> EFLAGS
    if (StringRef("{flags}").equals_lower(Constraint)) {
      Res.first = X86::EFLAGS;
      Res.second = &X86::CCRRegClass;
      return Res;
    }

    // 'A' means [ER]AX + [ER]DX.
    if (Constraint == "A") {
      if (Subtarget.is64Bit()) {
        Res.first = X86::RAX;
        Res.second = &X86::GR64_ADRegClass;
      } else {
        assert((Subtarget.is32Bit() || Subtarget.is16Bit()) &&
               "Expecting 64, 32 or 16 bit subtarget");
        Res.first = X86::EAX;
        Res.second = &X86::GR32_ADRegClass;
      }
      return Res;
    }
    return Res;
  }

  // Otherwise, check to see if this is a register class of the wrong value
  // type.  For example, we want to map "{ax},i32" -> {eax}, we don't want it to
  // turn into {ax},{dx}.
  // MVT::Other is used to specify clobber names.
  if (TRI->isTypeLegalForClass(*Res.second, VT) || VT == MVT::Other)
    return Res;   // Correct type already, nothing to do.

  // Get a matching integer of the correct size. i.e. "ax" with MVT::32 should
  // return "eax". This should even work for things like getting 64bit integer
  // registers when given an f64 type.
  const TargetRegisterClass *Class = Res.second;
  // The generic code will match the first register class that contains the
  // given register. Thus, based on the ordering of the tablegened file,
  // the "plain" GR classes might not come first.
  // Therefore, use a helper method.
  if (isGRClass(*Class)) {
    unsigned Size = VT.getSizeInBits();
    if (Size == 1) Size = 8;
    unsigned DestReg = getX86SubSuperRegisterOrZero(Res.first, Size);
    if (DestReg > 0) {
      bool is64Bit = Subtarget.is64Bit();
      const TargetRegisterClass *RC =
          Size == 8 ? (is64Bit ? &X86::GR8RegClass : &X86::GR8_NOREXRegClass)
        : Size == 16 ? (is64Bit ? &X86::GR16RegClass : &X86::GR16_NOREXRegClass)
        : Size == 32 ? (is64Bit ? &X86::GR32RegClass : &X86::GR32_NOREXRegClass)
        : &X86::GR64RegClass;
      if (RC->contains(DestReg))
        Res = std::make_pair(DestReg, RC);
    } else {
      // No register found/type mismatch.
      Res.first = 0;
      Res.second = nullptr;
    }
  } else if (isFRClass(*Class)) {
    // Handle references to XMM physical registers that got mapped into the
    // wrong class.  This can happen with constraints like {xmm0} where the
    // target independent register mapper will just pick the first match it can
    // find, ignoring the required type.

    // TODO: Handle f128 and i128 in FR128RegClass after it is tested well.
    if (VT == MVT::f32 || VT == MVT::i32)
      Res.second = &X86::FR32RegClass;
    else if (VT == MVT::f64 || VT == MVT::i64)
      Res.second = &X86::FR64RegClass;
    else if (TRI->isTypeLegalForClass(X86::VR128RegClass, VT))
      Res.second = &X86::VR128RegClass;
    else if (TRI->isTypeLegalForClass(X86::VR256RegClass, VT))
      Res.second = &X86::VR256RegClass;
    else if (TRI->isTypeLegalForClass(X86::VR512RegClass, VT))
      Res.second = &X86::VR512RegClass;
    else {
      // Type mismatch and not a clobber: Return an error;
      Res.first = 0;
      Res.second = nullptr;
    }
  }

  return Res;
}

int X86TargetLowering::getScalingFactorCost(const DataLayout &DL,
                                            const AddrMode &AM, Type *Ty,
                                            unsigned AS) const {
  // Scaling factors are not free at all.
  // An indexed folded instruction, i.e., inst (reg1, reg2, scale),
  // will take 2 allocations in the out of order engine instead of 1
  // for plain addressing mode, i.e. inst (reg1).
  // E.g.,
  // vaddps (%rsi,%drx), %ymm0, %ymm1
  // Requires two allocations (one for the load, one for the computation)
  // whereas:
  // vaddps (%rsi), %ymm0, %ymm1
  // Requires just 1 allocation, i.e., freeing allocations for other operations
  // and having less micro operations to execute.
  //
  // For some X86 architectures, this is even worse because for instance for
  // stores, the complex addressing mode forces the instruction to use the
  // "load" ports instead of the dedicated "store" port.
  // E.g., on Haswell:
  // vmovaps %ymm1, (%r8, %rdi) can use port 2 or 3.
  // vmovaps %ymm1, (%r8) can use port 2, 3, or 7.
  if (isLegalAddressingMode(DL, AM, Ty, AS))
    // Scale represents reg2 * scale, thus account for 1
    // as soon as we use a second register.
    return AM.Scale != 0;
  return -1;
}

bool X86TargetLowering::isIntDivCheap(EVT VT, AttributeList Attr) const {
  // Integer division on x86 is expensive. However, when aggressively optimizing
  // for code size, we prefer to use a div instruction, as it is usually smaller
  // than the alternative sequence.
  // The exception to this is vector division. Since x86 doesn't have vector
  // integer division, leaving the division as-is is a loss even in terms of
  // size, because it will have to be scalarized, while the alternative code
  // sequence can be performed in vector form.
  bool OptSize =
      Attr.hasAttribute(AttributeList::FunctionIndex, Attribute::MinSize);
  return OptSize && !VT.isVector();
}

void X86TargetLowering::initializeSplitCSR(MachineBasicBlock *Entry) const {
  if (!Subtarget.is64Bit())
    return;

  // Update IsSplitCSR in X86MachineFunctionInfo.
  X86MachineFunctionInfo *AFI =
    Entry->getParent()->getInfo<X86MachineFunctionInfo>();
  AFI->setIsSplitCSR(true);
}

void X86TargetLowering::insertCopiesSplitCSR(
    MachineBasicBlock *Entry,
    const SmallVectorImpl<MachineBasicBlock *> &Exits) const {
  const X86RegisterInfo *TRI = Subtarget.getRegisterInfo();
  const MCPhysReg *IStart = TRI->getCalleeSavedRegsViaCopy(Entry->getParent());
  if (!IStart)
    return;

  const TargetInstrInfo *TII = Subtarget.getInstrInfo();
  MachineRegisterInfo *MRI = &Entry->getParent()->getRegInfo();
  MachineBasicBlock::iterator MBBI = Entry->begin();
  for (const MCPhysReg *I = IStart; *I; ++I) {
    const TargetRegisterClass *RC = nullptr;
    if (X86::GR64RegClass.contains(*I))
      RC = &X86::GR64RegClass;
    else
      llvm_unreachable("Unexpected register class in CSRsViaCopy!");

    unsigned NewVR = MRI->createVirtualRegister(RC);
    // Create copy from CSR to a virtual register.
    // FIXME: this currently does not emit CFI pseudo-instructions, it works
    // fine for CXX_FAST_TLS since the C++-style TLS access functions should be
    // nounwind. If we want to generalize this later, we may need to emit
    // CFI pseudo-instructions.
    assert(Entry->getParent()->getFunction()->hasFnAttribute(
               Attribute::NoUnwind) &&
           "Function should be nounwind in insertCopiesSplitCSR!");
    Entry->addLiveIn(*I);
    BuildMI(*Entry, MBBI, DebugLoc(), TII->get(TargetOpcode::COPY), NewVR)
        .addReg(*I);

    // Insert the copy-back instructions right before the terminator.
    for (auto *Exit : Exits)
      BuildMI(*Exit, Exit->getFirstTerminator(), DebugLoc(),
              TII->get(TargetOpcode::COPY), *I)
          .addReg(NewVR);
  }
}

bool X86TargetLowering::supportSwiftError() const {
  return Subtarget.is64Bit();
}

/// Returns the name of the symbol used to emit stack probes or the empty
/// string if not applicable.
StringRef X86TargetLowering::getStackProbeSymbolName(MachineFunction &MF) const {
  // If the function specifically requests stack probes, emit them.
  if (MF.getFunction()->hasFnAttribute("probe-stack"))
    return MF.getFunction()->getFnAttribute("probe-stack").getValueAsString();

  // Generally, if we aren't on Windows, the platform ABI does not include
  // support for stack probes, so don't emit them.
  if (!Subtarget.isOSWindows() || Subtarget.isTargetMachO())
    return "";

  // We need a stack probe to conform to the Windows ABI. Choose the right
  // symbol.
  if (Subtarget.is64Bit())
    return Subtarget.isTargetCygMing() ? "___chkstk_ms" : "__chkstk";
  return Subtarget.isTargetCygMing() ? "_alloca" : "_chkstk";
}