//===- LoopInfo.cpp - Natural Loop Calculator -----------------------------===//
//
//                     The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file defines the LoopInfo class that is used to identify natural loops
// and determine the loop depth of various nodes of the CFG.  Note that the
// loops identified may actually be several natural loops that share the same
// header node... not just a single natural loop.
//
//===----------------------------------------------------------------------===//

#include "llvm/Analysis/LoopInfo.h"
#include "llvm/ADT/DepthFirstIterator.h"
#include "llvm/ADT/ScopeExit.h"
#include "llvm/ADT/SmallPtrSet.h"
#include "llvm/Analysis/LoopInfoImpl.h"
#include "llvm/Analysis/LoopIterator.h"
#include "llvm/Analysis/ValueTracking.h"
#include "llvm/Config/llvm-config.h"
#include "llvm/IR/CFG.h"
#include "llvm/IR/Constants.h"
#include "llvm/IR/DebugLoc.h"
#include "llvm/IR/Dominators.h"
#include "llvm/IR/IRPrintingPasses.h"
#include "llvm/IR/Instructions.h"
#include "llvm/IR/LLVMContext.h"
#include "llvm/IR/Metadata.h"
#include "llvm/IR/PassManager.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/raw_ostream.h"
#include <algorithm>
using namespace llvm;

// Explicitly instantiate methods in LoopInfoImpl.h for IR-level Loops.
template class llvm::LoopBase<BasicBlock, Loop>;
template class llvm::LoopInfoBase<BasicBlock, Loop>;

// Always verify loopinfo if expensive checking is enabled.
#ifdef EXPENSIVE_CHECKS
bool llvm::VerifyLoopInfo = true;
#else
bool llvm::VerifyLoopInfo = false;
#endif
static cl::opt<bool, true>
    VerifyLoopInfoX("verify-loop-info", cl::location(VerifyLoopInfo),
                    cl::Hidden, cl::desc("Verify loop info (time consuming)"));

//===----------------------------------------------------------------------===//
// Loop implementation
//

bool Loop::isLoopInvariant(const Value *V) const {
  if (const Instruction *I = dyn_cast<Instruction>(V))
    return !contains(I);
  return true; // All non-instructions are loop invariant
}

bool Loop::hasLoopInvariantOperands(const Instruction *I) const {
  return all_of(I->operands(), [this](Value *V) { return isLoopInvariant(V); });
}

bool Loop::makeLoopInvariant(Value *V, bool &Changed,
                             Instruction *InsertPt) const {
  if (Instruction *I = dyn_cast<Instruction>(V))
    return makeLoopInvariant(I, Changed, InsertPt);
  return true; // All non-instructions are loop-invariant.
}

bool Loop::makeLoopInvariant(Instruction *I, bool &Changed,
                             Instruction *InsertPt) const {
  // Test if the value is already loop-invariant.
  if (isLoopInvariant(I))
    return true;
  if (!isSafeToSpeculativelyExecute(I))
    return false;
  if (I->mayReadFromMemory())
    return false;
  // EH block instructions are immobile.
  if (I->isEHPad())
    return false;
  // Determine the insertion point, unless one was given.
  if (!InsertPt) {
    BasicBlock *Preheader = getLoopPreheader();
    // Without a preheader, hoisting is not feasible.
    if (!Preheader)
      return false;
    InsertPt = Preheader->getTerminator();
  }
  // Don't hoist instructions with loop-variant operands.
  for (Value *Operand : I->operands())
    if (!makeLoopInvariant(Operand, Changed, InsertPt))
      return false;

  // Hoist.
  I->moveBefore(InsertPt);

  // There is possibility of hoisting this instruction above some arbitrary
  // condition. Any metadata defined on it can be control dependent on this
  // condition. Conservatively strip it here so that we don't give any wrong
  // information to the optimizer.
  I->dropUnknownNonDebugMetadata();

  Changed = true;
  return true;
}

PHINode *Loop::getCanonicalInductionVariable() const {
  BasicBlock *H = getHeader();

  BasicBlock *Incoming = nullptr, *Backedge = nullptr;
  pred_iterator PI = pred_begin(H);
  assert(PI != pred_end(H) && "Loop must have at least one backedge!");
  Backedge = *PI++;
  if (PI == pred_end(H))
    return nullptr; // dead loop
  Incoming = *PI++;
  if (PI != pred_end(H))
    return nullptr; // multiple backedges?

  if (contains(Incoming)) {
    if (contains(Backedge))
      return nullptr;
    std::swap(Incoming, Backedge);
  } else if (!contains(Backedge))
    return nullptr;

  // Loop over all of the PHI nodes, looking for a canonical indvar.
  for (BasicBlock::iterator I = H->begin(); isa<PHINode>(I); ++I) {
    PHINode *PN = cast<PHINode>(I);
    if (ConstantInt *CI =
            dyn_cast<ConstantInt>(PN->getIncomingValueForBlock(Incoming)))
      if (CI->isZero())
        if (Instruction *Inc =
                dyn_cast<Instruction>(PN->getIncomingValueForBlock(Backedge)))
          if (Inc->getOpcode() == Instruction::Add && Inc->getOperand(0) == PN)
            if (ConstantInt *CI = dyn_cast<ConstantInt>(Inc->getOperand(1)))
              if (CI->isOne())
                return PN;
  }
  return nullptr;
}

// Check that 'BB' doesn't have any uses outside of the 'L'
static bool isBlockInLCSSAForm(const Loop &L, const BasicBlock &BB,
                               DominatorTree &DT) {
  for (const Instruction &I : BB) {
    // Tokens can't be used in PHI nodes and live-out tokens prevent loop
    // optimizations, so for the purposes of considered LCSSA form, we
    // can ignore them.
    if (I.getType()->isTokenTy())
      continue;

    for (const Use &U : I.uses()) {
      const Instruction *UI = cast<Instruction>(U.getUser());
      const BasicBlock *UserBB = UI->getParent();
      if (const PHINode *P = dyn_cast<PHINode>(UI))
        UserBB = P->getIncomingBlock(U);

      // Check the current block, as a fast-path, before checking whether
      // the use is anywhere in the loop.  Most values are used in the same
      // block they are defined in.  Also, blocks not reachable from the
      // entry are special; uses in them don't need to go through PHIs.
      if (UserBB != &BB && !L.contains(UserBB) &&
          DT.isReachableFromEntry(UserBB))
        return false;
    }
  }
  return true;
}

bool Loop::isLCSSAForm(DominatorTree &DT) const {
  // For each block we check that it doesn't have any uses outside of this loop.
  return all_of(this->blocks(), [&](const BasicBlock *BB) {
    return isBlockInLCSSAForm(*this, *BB, DT);
  });
}

bool Loop::isRecursivelyLCSSAForm(DominatorTree &DT, const LoopInfo &LI) const {
  // For each block we check that it doesn't have any uses outside of its
  // innermost loop. This process will transitively guarantee that the current
  // loop and all of the nested loops are in LCSSA form.
  return all_of(this->blocks(), [&](const BasicBlock *BB) {
    return isBlockInLCSSAForm(*LI.getLoopFor(BB), *BB, DT);
  });
}

bool Loop::isLoopSimplifyForm() const {
  // Normal-form loops have a preheader, a single backedge, and all of their
  // exits have all their predecessors inside the loop.
  return getLoopPreheader() && getLoopLatch() && hasDedicatedExits();
}

// Routines that reform the loop CFG and split edges often fail on indirectbr.
bool Loop::isSafeToClone() const {
  // Return false if any loop blocks contain indirectbrs, or there are any calls
  // to noduplicate functions.
  for (BasicBlock *BB : this->blocks()) {
    if (isa<IndirectBrInst>(BB->getTerminator()))
      return false;

    for (Instruction &I : *BB)
      if (auto CS = CallSite(&I))
        if (CS.cannotDuplicate())
          return false;
  }
  return true;
}

MDNode *Loop::getLoopID() const {
  MDNode *LoopID = nullptr;

  // Go through the latch blocks and check the terminator for the metadata.
  SmallVector<BasicBlock *, 4> LatchesBlocks;
  getLoopLatches(LatchesBlocks);
  for (BasicBlock *BB : LatchesBlocks) {
    Instruction *TI = BB->getTerminator();
    MDNode *MD = TI->getMetadata(LLVMContext::MD_loop);

    if (!MD)
      return nullptr;

    if (!LoopID)
      LoopID = MD;
    else if (MD != LoopID)
      return nullptr;
  }
  if (!LoopID || LoopID->getNumOperands() == 0 ||
      LoopID->getOperand(0) != LoopID)
    return nullptr;
  return LoopID;
}

void Loop::setLoopID(MDNode *LoopID) const {
  assert((!LoopID || LoopID->getNumOperands() > 0) &&
         "Loop ID needs at least one operand");
  assert((!LoopID || LoopID->getOperand(0) == LoopID) &&
         "Loop ID should refer to itself");

  BasicBlock *H = getHeader();
  for (BasicBlock *BB : this->blocks()) {
    Instruction *TI = BB->getTerminator();
    for (BasicBlock *Successor : successors(TI)) {
      if (Successor == H) {
        TI->setMetadata(LLVMContext::MD_loop, LoopID);
        break;
      }
    }
  }
}

void Loop::setLoopAlreadyUnrolled() {
  MDNode *LoopID = getLoopID();
  // First remove any existing loop unrolling metadata.
  SmallVector<Metadata *, 4> MDs;
  // Reserve first location for self reference to the LoopID metadata node.
  MDs.push_back(nullptr);

  if (LoopID) {
    for (unsigned i = 1, ie = LoopID->getNumOperands(); i < ie; ++i) {
      bool IsUnrollMetadata = false;
      MDNode *MD = dyn_cast<MDNode>(LoopID->getOperand(i));
      if (MD) {
        const MDString *S = dyn_cast<MDString>(MD->getOperand(0));
        IsUnrollMetadata = S && S->getString().startswith("llvm.loop.unroll.");
      }
      if (!IsUnrollMetadata)
        MDs.push_back(LoopID->getOperand(i));
    }
  }

  // Add unroll(disable) metadata to disable future unrolling.
  LLVMContext &Context = getHeader()->getContext();
  SmallVector<Metadata *, 1> DisableOperands;
  DisableOperands.push_back(MDString::get(Context, "llvm.loop.unroll.disable"));
  MDNode *DisableNode = MDNode::get(Context, DisableOperands);
  MDs.push_back(DisableNode);

  MDNode *NewLoopID = MDNode::get(Context, MDs);
  // Set operand 0 to refer to the loop id itself.
  NewLoopID->replaceOperandWith(0, NewLoopID);
  setLoopID(NewLoopID);
}

bool Loop::isAnnotatedParallel() const {
  MDNode *DesiredLoopIdMetadata = getLoopID();

  if (!DesiredLoopIdMetadata)
    return false;

  // The loop branch contains the parallel loop metadata. In order to ensure
  // that any parallel-loop-unaware optimization pass hasn't added loop-carried
  // dependencies (thus converted the loop back to a sequential loop), check
  // that all the memory instructions in the loop contain parallelism metadata
  // that point to the same unique "loop id metadata" the loop branch does.
  for (BasicBlock *BB : this->blocks()) {
    for (Instruction &I : *BB) {
      if (!I.mayReadOrWriteMemory())
        continue;

      // The memory instruction can refer to the loop identifier metadata
      // directly or indirectly through another list metadata (in case of
      // nested parallel loops). The loop identifier metadata refers to
      // itself so we can check both cases with the same routine.
      MDNode *LoopIdMD =
          I.getMetadata(LLVMContext::MD_mem_parallel_loop_access);

      if (!LoopIdMD)
        return false;

      bool LoopIdMDFound = false;
      for (const MDOperand &MDOp : LoopIdMD->operands()) {
        if (MDOp == DesiredLoopIdMetadata) {
          LoopIdMDFound = true;
          break;
        }
      }

      if (!LoopIdMDFound)
        return false;
    }
  }
  return true;
}

DebugLoc Loop::getStartLoc() const { return getLocRange().getStart(); }

Loop::LocRange Loop::getLocRange() const {
  // If we have a debug location in the loop ID, then use it.
  if (MDNode *LoopID = getLoopID()) {
    DebugLoc Start;
    // We use the first DebugLoc in the header as the start location of the loop
    // and if there is a second DebugLoc in the header we use it as end location
    // of the loop.
    for (unsigned i = 1, ie = LoopID->getNumOperands(); i < ie; ++i) {
      if (DILocation *L = dyn_cast<DILocation>(LoopID->getOperand(i))) {
        if (!Start)
          Start = DebugLoc(L);
        else
          return LocRange(Start, DebugLoc(L));
      }
    }

    if (Start)
      return LocRange(Start);
  }

  // Try the pre-header first.
  if (BasicBlock *PHeadBB = getLoopPreheader())
    if (DebugLoc DL = PHeadBB->getTerminator()->getDebugLoc())
      return LocRange(DL);

  // If we have no pre-header or there are no instructions with debug
  // info in it, try the header.
  if (BasicBlock *HeadBB = getHeader())
    return LocRange(HeadBB->getTerminator()->getDebugLoc());

  return LocRange();
}

#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void Loop::dump() const { print(dbgs()); }

LLVM_DUMP_METHOD void Loop::dumpVerbose() const {
  print(dbgs(), /*Depth=*/0, /*Verbose=*/true);
}
#endif

//===----------------------------------------------------------------------===//
// UnloopUpdater implementation
//

namespace {
/// Find the new parent loop for all blocks within the "unloop" whose last
/// backedges has just been removed.
class UnloopUpdater {
  Loop &Unloop;
  LoopInfo *LI;

  LoopBlocksDFS DFS;

  // Map unloop's immediate subloops to their nearest reachable parents. Nested
  // loops within these subloops will not change parents. However, an immediate
  // subloop's new parent will be the nearest loop reachable from either its own
  // exits *or* any of its nested loop's exits.
  DenseMap<Loop *, Loop *> SubloopParents;

  // Flag the presence of an irreducible backedge whose destination is a block
  // directly contained by the original unloop.
  bool FoundIB;

public:
  UnloopUpdater(Loop *UL, LoopInfo *LInfo)
      : Unloop(*UL), LI(LInfo), DFS(UL), FoundIB(false) {}

  void updateBlockParents();

  void removeBlocksFromAncestors();

  void updateSubloopParents();

protected:
  Loop *getNearestLoop(BasicBlock *BB, Loop *BBLoop);
};
} // end anonymous namespace

/// Update the parent loop for all blocks that are directly contained within the
/// original "unloop".
void UnloopUpdater::updateBlockParents() {
  if (Unloop.getNumBlocks()) {
    // Perform a post order CFG traversal of all blocks within this loop,
    // propagating the nearest loop from successors to predecessors.
    LoopBlocksTraversal Traversal(DFS, LI);
    for (BasicBlock *POI : Traversal) {

      Loop *L = LI->getLoopFor(POI);
      Loop *NL = getNearestLoop(POI, L);

      if (NL != L) {
        // For reducible loops, NL is now an ancestor of Unloop.
        assert((NL != &Unloop && (!NL || NL->contains(&Unloop))) &&
               "uninitialized successor");
        LI->changeLoopFor(POI, NL);
      } else {
        // Or the current block is part of a subloop, in which case its parent
        // is unchanged.
        assert((FoundIB || Unloop.contains(L)) && "uninitialized successor");
      }
    }
  }
  // Each irreducible loop within the unloop induces a round of iteration using
  // the DFS result cached by Traversal.
  bool Changed = FoundIB;
  for (unsigned NIters = 0; Changed; ++NIters) {
    assert(NIters < Unloop.getNumBlocks() && "runaway iterative algorithm");

    // Iterate over the postorder list of blocks, propagating the nearest loop
    // from successors to predecessors as before.
    Changed = false;
    for (LoopBlocksDFS::POIterator POI = DFS.beginPostorder(),
                                   POE = DFS.endPostorder();
         POI != POE; ++POI) {

      Loop *L = LI->getLoopFor(*POI);
      Loop *NL = getNearestLoop(*POI, L);
      if (NL != L) {
        assert(NL != &Unloop && (!NL || NL->contains(&Unloop)) &&
               "uninitialized successor");
        LI->changeLoopFor(*POI, NL);
        Changed = true;
      }
    }
  }
}

/// Remove unloop's blocks from all ancestors below their new parents.
void UnloopUpdater::removeBlocksFromAncestors() {
  // Remove all unloop's blocks (including those in nested subloops) from
  // ancestors below the new parent loop.
  for (Loop::block_iterator BI = Unloop.block_begin(), BE = Unloop.block_end();
       BI != BE; ++BI) {
    Loop *OuterParent = LI->getLoopFor(*BI);
    if (Unloop.contains(OuterParent)) {
      while (OuterParent->getParentLoop() != &Unloop)
        OuterParent = OuterParent->getParentLoop();
      OuterParent = SubloopParents[OuterParent];
    }
    // Remove blocks from former Ancestors except Unloop itself which will be
    // deleted.
    for (Loop *OldParent = Unloop.getParentLoop(); OldParent != OuterParent;
         OldParent = OldParent->getParentLoop()) {
      assert(OldParent && "new loop is not an ancestor of the original");
      OldParent->removeBlockFromLoop(*BI);
    }
  }
}

/// Update the parent loop for all subloops directly nested within unloop.
void UnloopUpdater::updateSubloopParents() {
  while (!Unloop.empty()) {
    Loop *Subloop = *std::prev(Unloop.end());
    Unloop.removeChildLoop(std::prev(Unloop.end()));

    assert(SubloopParents.count(Subloop) && "DFS failed to visit subloop");
    if (Loop *Parent = SubloopParents[Subloop])
      Parent->addChildLoop(Subloop);
    else
      LI->addTopLevelLoop(Subloop);
  }
}

/// Return the nearest parent loop among this block's successors. If a successor
/// is a subloop header, consider its parent to be the nearest parent of the
/// subloop's exits.
///
/// For subloop blocks, simply update SubloopParents and return NULL.
Loop *UnloopUpdater::getNearestLoop(BasicBlock *BB, Loop *BBLoop) {

  // Initially for blocks directly contained by Unloop, NearLoop == Unloop and
  // is considered uninitialized.
  Loop *NearLoop = BBLoop;

  Loop *Subloop = nullptr;
  if (NearLoop != &Unloop && Unloop.contains(NearLoop)) {
    Subloop = NearLoop;
    // Find the subloop ancestor that is directly contained within Unloop.
    while (Subloop->getParentLoop() != &Unloop) {
      Subloop = Subloop->getParentLoop();
      assert(Subloop && "subloop is not an ancestor of the original loop");
    }
    // Get the current nearest parent of the Subloop exits, initially Unloop.
    NearLoop = SubloopParents.insert({Subloop, &Unloop}).first->second;
  }

  succ_iterator I = succ_begin(BB), E = succ_end(BB);
  if (I == E) {
    assert(!Subloop && "subloop blocks must have a successor");
    NearLoop = nullptr; // unloop blocks may now exit the function.
  }
  for (; I != E; ++I) {
    if (*I == BB)
      continue; // self loops are uninteresting

    Loop *L = LI->getLoopFor(*I);
    if (L == &Unloop) {
      // This successor has not been processed. This path must lead to an
      // irreducible backedge.
      assert((FoundIB || !DFS.hasPostorder(*I)) && "should have seen IB");
      FoundIB = true;
    }
    if (L != &Unloop && Unloop.contains(L)) {
      // Successor is in a subloop.
      if (Subloop)
        continue; // Branching within subloops. Ignore it.

      // BB branches from the original into a subloop header.
      assert(L->getParentLoop() == &Unloop && "cannot skip into nested loops");

      // Get the current nearest parent of the Subloop's exits.
      L = SubloopParents[L];
      // L could be Unloop if the only exit was an irreducible backedge.
    }
    if (L == &Unloop) {
      continue;
    }
    // Handle critical edges from Unloop into a sibling loop.
    if (L && !L->contains(&Unloop)) {
      L = L->getParentLoop();
    }
    // Remember the nearest parent loop among successors or subloop exits.
    if (NearLoop == &Unloop || !NearLoop || NearLoop->contains(L))
      NearLoop = L;
  }
  if (Subloop) {
    SubloopParents[Subloop] = NearLoop;
    return BBLoop;
  }
  return NearLoop;
}

LoopInfo::LoopInfo(const DomTreeBase<BasicBlock> &DomTree) { analyze(DomTree); }

bool LoopInfo::invalidate(Function &F, const PreservedAnalyses &PA,
                          FunctionAnalysisManager::Invalidator &) {
  // Check whether the analysis, all analyses on functions, or the function's
  // CFG have been preserved.
  auto PAC = PA.getChecker<LoopAnalysis>();
  return !(PAC.preserved() || PAC.preservedSet<AllAnalysesOn<Function>>() ||
           PAC.preservedSet<CFGAnalyses>());
}

void LoopInfo::erase(Loop *Unloop) {
  assert(!Unloop->isInvalid() && "Loop has already been erased!");

  auto InvalidateOnExit = make_scope_exit([&]() { destroy(Unloop); });

  // First handle the special case of no parent loop to simplify the algorithm.
  if (!Unloop->getParentLoop()) {
    // Since BBLoop had no parent, Unloop blocks are no longer in a loop.
    for (Loop::block_iterator I = Unloop->block_begin(),
                              E = Unloop->block_end();
         I != E; ++I) {

      // Don't reparent blocks in subloops.
      if (getLoopFor(*I) != Unloop)
        continue;

      // Blocks no longer have a parent but are still referenced by Unloop until
      // the Unloop object is deleted.
      changeLoopFor(*I, nullptr);
    }

    // Remove the loop from the top-level LoopInfo object.
    for (iterator I = begin();; ++I) {
      assert(I != end() && "Couldn't find loop");
      if (*I == Unloop) {
        removeLoop(I);
        break;
      }
    }

    // Move all of the subloops to the top-level.
    while (!Unloop->empty())
      addTopLevelLoop(Unloop->removeChildLoop(std::prev(Unloop->end())));

    return;
  }

  // Update the parent loop for all blocks within the loop. Blocks within
  // subloops will not change parents.
  UnloopUpdater Updater(Unloop, this);
  Updater.updateBlockParents();

  // Remove blocks from former ancestor loops.
  Updater.removeBlocksFromAncestors();

  // Add direct subloops as children in their new parent loop.
  Updater.updateSubloopParents();

  // Remove unloop from its parent loop.
  Loop *ParentLoop = Unloop->getParentLoop();
  for (Loop::iterator I = ParentLoop->begin();; ++I) {
    assert(I != ParentLoop->end() && "Couldn't find loop");
    if (*I == Unloop) {
      ParentLoop->removeChildLoop(I);
      break;
    }
  }
}

AnalysisKey LoopAnalysis::Key;

LoopInfo LoopAnalysis::run(Function &F, FunctionAnalysisManager &AM) {
  // FIXME: Currently we create a LoopInfo from scratch for every function.
  // This may prove to be too wasteful due to deallocating and re-allocating
  // memory each time for the underlying map and vector datastructures. At some
  // point it may prove worthwhile to use a freelist and recycle LoopInfo
  // objects. I don't want to add that kind of complexity until the scope of
  // the problem is better understood.
  LoopInfo LI;
  LI.analyze(AM.getResult<DominatorTreeAnalysis>(F));
  return LI;
}

PreservedAnalyses LoopPrinterPass::run(Function &F,
                                       FunctionAnalysisManager &AM) {
  AM.getResult<LoopAnalysis>(F).print(OS);
  return PreservedAnalyses::all();
}

void llvm::printLoop(Loop &L, raw_ostream &OS, const std::string &Banner) {

  if (forcePrintModuleIR()) {
    // handling -print-module-scope
    OS << Banner << " (loop: ";
    L.getHeader()->printAsOperand(OS, false);
    OS << ")\n";

    // printing whole module
    OS << *L.getHeader()->getModule();
    return;
  }

  OS << Banner;

  auto *PreHeader = L.getLoopPreheader();
  if (PreHeader) {
    OS << "\n; Preheader:";
    PreHeader->print(OS);
    OS << "\n; Loop:";
  }

  for (auto *Block : L.blocks())
    if (Block)
      Block->print(OS);
    else
      OS << "Printing <null> block";

  SmallVector<BasicBlock *, 8> ExitBlocks;
  L.getExitBlocks(ExitBlocks);
  if (!ExitBlocks.empty()) {
    OS << "\n; Exit blocks";
    for (auto *Block : ExitBlocks)
      if (Block)
        Block->print(OS);
      else
        OS << "Printing <null> block";
  }
}

//===----------------------------------------------------------------------===//
// LoopInfo implementation
//

char LoopInfoWrapperPass::ID = 0;
INITIALIZE_PASS_BEGIN(LoopInfoWrapperPass, "loops", "Natural Loop Information",
                      true, true)
INITIALIZE_PASS_DEPENDENCY(DominatorTreeWrapperPass)
INITIALIZE_PASS_END(LoopInfoWrapperPass, "loops", "Natural Loop Information",
                    true, true)

bool LoopInfoWrapperPass::runOnFunction(Function &) {
  releaseMemory();
  LI.analyze(getAnalysis<DominatorTreeWrapperPass>().getDomTree());
  return false;
}

void LoopInfoWrapperPass::verifyAnalysis() const {
  // LoopInfoWrapperPass is a FunctionPass, but verifying every loop in the
  // function each time verifyAnalysis is called is very expensive. The
  // -verify-loop-info option can enable this. In order to perform some
  // checking by default, LoopPass has been taught to call verifyLoop manually
  // during loop pass sequences.
  if (VerifyLoopInfo) {
    auto &DT = getAnalysis<DominatorTreeWrapperPass>().getDomTree();
    LI.verify(DT);
  }
}

void LoopInfoWrapperPass::getAnalysisUsage(AnalysisUsage &AU) const {
  AU.setPreservesAll();
  AU.addRequired<DominatorTreeWrapperPass>();
}

void LoopInfoWrapperPass::print(raw_ostream &OS, const Module *) const {
  LI.print(OS);
}

PreservedAnalyses LoopVerifierPass::run(Function &F,
                                        FunctionAnalysisManager &AM) {
  LoopInfo &LI = AM.getResult<LoopAnalysis>(F);
  auto &DT = AM.getResult<DominatorTreeAnalysis>(F);
  LI.verify(DT);
  return PreservedAnalyses::all();
}

//===----------------------------------------------------------------------===//
// LoopBlocksDFS implementation
//

/// Traverse the loop blocks and store the DFS result.
/// Useful for clients that just want the final DFS result and don't need to
/// visit blocks during the initial traversal.
void LoopBlocksDFS::perform(LoopInfo *LI) {
  LoopBlocksTraversal Traversal(*this, LI);
  for (LoopBlocksTraversal::POTIterator POI = Traversal.begin(),
                                        POE = Traversal.end();
       POI != POE; ++POI)
    ;
}