blob: c5ccaa46f37b624da47ff85c3d665ea519a310c3 [file] [log] [blame]
# RUN: llc -mtriple=x86_64-unknown-linux-gnu -run-pass x86-fixup-bw-insts %s -o - | FileCheck %s
--- |
define void @test1() { ret void }
define void @test2() { ret void }
define i16 @test3(i16* readonly %p) {
; Keep original IR to show how the situation like this might happen
; due to preceding CG passes.
;
; %0 is used in %if.end BB (before tail-duplication), so its
; corresponding super-register (EAX) is live-in into that BB (%if.end)
; and also has an implicit-def EAX flag. Make sure that we still change
; the movw into movzwl because EAX is not live before the load (which
; can be seen by the fact that implicit EAX flag is missing).
entry:
%tobool = icmp eq i16* %p, null
br i1 %tobool, label %if.end, label %if.then
if.then: ; preds = %entry
%0 = load i16, i16* %p, align 2
br label %if.end
if.end: ; preds = %if.then, %entry
%i.0 = phi i16 [ %0, %if.then ], [ 0, %entry ]
ret i16 %i.0
}
define i16 @test4() {
entry:
%t1 = zext i1 undef to i16
%t2 = or i16 undef, %t1
ret i16 %t2
}
define void @test5() {ret void}
...
---
# CHECK-LABEL: name: test1
name: test1
alignment: 4
tracksRegLiveness: true
liveins:
- { reg: '$rax' }
# Verify that "movw ($rax), $ax" is changed to "movzwl ($rax), $rax".
#
# For that to happen, the liveness information after the MOV16rm
# instruction should be used, not before it because $rax is live
# before the MOV and is killed by it.
body: |
bb.0:
liveins: $rax
$ax = MOV16rm killed $rax, 1, $noreg, 0, $noreg
; CHECK: $eax = MOVZX32rm16 killed $rax
RETQ $ax
...
---
# CHECK-LABEL: name: test2
name: test2
alignment: 4
tracksRegLiveness: true
liveins:
- { reg: '$rax' }
# Imp-use of any super-register means the register is live before the MOV
body: |
bb.0:
liveins: $dl, $rbx, $rcx, $r14
$cl = MOV8rr killed $dl, implicit killed $rcx, implicit-def $rcx
; CHECK: $cl = MOV8rr killed $dl, implicit killed $rcx, implicit-def $rcx
JMP_1 %bb.1
bb.1:
liveins: $rcx
RETQ $cl
...
---
# CHECK-LABEL: name: test3
name: test3
alignment: 4
tracksRegLiveness: true
liveins:
- { reg: '$rdi' }
# After MOV16rm the whole $eax is not *really* live, as can be seen by
# missing implicit-uses of it in that MOV. Make sure that MOV is
# transformed into MOVZX.
# See the comment near the original IR on what preceding decisions can
# lead to that.
body: |
bb.0.entry:
successors: %bb.1(0x30000000), %bb.2.if.then(0x50000000)
liveins: $rdi
TEST64rr $rdi, $rdi, implicit-def $eflags
JE_1 %bb.1, implicit $eflags
bb.2.if.then:
liveins: $rdi
$ax = MOV16rm killed $rdi, 1, $noreg, 0, $noreg, implicit-def $eax :: (load 2 from %ir.p)
; CHECK: $eax = MOVZX32rm16 killed $rdi, 1, $noreg, 0, $noreg, implicit-def $eax :: (load 2 from %ir.p)
$ax = KILL $ax, implicit killed $eax
RETQ $ax
bb.1:
$eax = XOR32rr undef $eax, undef $eax, implicit-def dead $eflags
$ax = KILL $ax, implicit killed $eax
RETQ $ax
...
---
# CHECK-LABEL: name: test4
name: test4
alignment: 4
tracksRegLiveness: true
liveins:
- { reg: '$r9d' }
# This code copies r10b into r9b and then uses r9w. We would like to promote
# the copy to a 32-bit copy, but because r9w is used this is not acceptable.
body: |
bb.0.entry:
liveins: $r9d
$r9b = MOV8rr undef $r10b, implicit-def $r9d, implicit killed $r9d, implicit-def $eflags
; CHECK: $r9b = MOV8rr undef $r10b, implicit-def $r9d, implicit killed $r9d, implicit-def $eflags
$ax = OR16rr undef $ax, $r9w, implicit-def $eflags
RETQ $ax
...
---
# CHECK-LABEL: name: test5
name: test5
alignment: 4
tracksRegLiveness: true
liveins:
- { reg: '$ch', reg: '$bl' }
body: |
bb.0:
liveins: $ch, $bl
$cl = MOV8rr $bl, implicit-def $cx, implicit killed $ch, implicit-def $eflags
; CHECK: $cl = MOV8rr $bl, implicit-def $cx, implicit killed $ch, implicit-def $eflags
RETQ $cx
...