; NOTE: Assertions have been autogenerated by utils/update_llc_test_checks.py
; RUN: llc < %s -mtriple=x86_64-linux-gnu | FileCheck %s

; fold (shl (zext (lshr (A, X))), X) -> (zext (shl (lshr (A, X)), X))

; Canolicalize the sequence shl/zext/lshr performing the zeroextend
; as the last instruction of the sequence.
; This will help DAGCombiner to identify and then fold the sequence
; of shifts into a single AND.
; This transformation is profitable if the shift amounts are the same
; and if there is only one use of the zext.

define i16 @fun1(i8 zeroext %v) {
; CHECK-LABEL: fun1:
; CHECK:       # %bb.0: # %entry
; CHECK-NEXT:    movl %edi, %eax
; CHECK-NEXT:    andl $-16, %eax
; CHECK-NEXT:    # kill: def $ax killed $ax killed $eax
; CHECK-NEXT:    retq
entry:
  %shr = lshr i8 %v, 4
  %ext = zext i8 %shr to i16
  %shl = shl i16 %ext, 4
  ret i16 %shl
}

define i32 @fun2(i8 zeroext %v) {
; CHECK-LABEL: fun2:
; CHECK:       # %bb.0: # %entry
; CHECK-NEXT:    movl %edi, %eax
; CHECK-NEXT:    andl $-16, %eax
; CHECK-NEXT:    retq
entry:
  %shr = lshr i8 %v, 4
  %ext = zext i8 %shr to i32
  %shl = shl i32 %ext, 4
  ret i32 %shl
}

define i32 @fun3(i16 zeroext %v) {
; CHECK-LABEL: fun3:
; CHECK:       # %bb.0: # %entry
; CHECK-NEXT:    movl %edi, %eax
; CHECK-NEXT:    andl $-16, %eax
; CHECK-NEXT:    retq
entry:
  %shr = lshr i16 %v, 4
  %ext = zext i16 %shr to i32
  %shl = shl i32 %ext, 4
  ret i32 %shl
}

define i64 @fun4(i8 zeroext %v) {
; CHECK-LABEL: fun4:
; CHECK:       # %bb.0: # %entry
; CHECK-NEXT:    movl %edi, %eax
; CHECK-NEXT:    andl $-16, %eax
; CHECK-NEXT:    retq
entry:
  %shr = lshr i8 %v, 4
  %ext = zext i8 %shr to i64
  %shl = shl i64 %ext, 4
  ret i64 %shl
}

define i64 @fun5(i16 zeroext %v) {
; CHECK-LABEL: fun5:
; CHECK:       # %bb.0: # %entry
; CHECK-NEXT:    movl %edi, %eax
; CHECK-NEXT:    andl $-16, %eax
; CHECK-NEXT:    retq
entry:
  %shr = lshr i16 %v, 4
  %ext = zext i16 %shr to i64
  %shl = shl i64 %ext, 4
  ret i64 %shl
}

define i64 @fun6(i32 zeroext %v) {
; CHECK-LABEL: fun6:
; CHECK:       # %bb.0: # %entry
; CHECK-NEXT:    movl %edi, %eax
; CHECK-NEXT:    andl $-16, %eax
; CHECK-NEXT:    retq
entry:
  %shr = lshr i32 %v, 4
  %ext = zext i32 %shr to i64
  %shl = shl i64 %ext, 4
  ret i64 %shl
}

; Don't fold the pattern if we use arithmetic shifts.

define i64 @fun7(i8 zeroext %v) {
; CHECK-LABEL: fun7:
; CHECK:       # %bb.0: # %entry
; CHECK-NEXT:    sarb $4, %dil
; CHECK-NEXT:    movzbl %dil, %eax
; CHECK-NEXT:    shlq $4, %rax
; CHECK-NEXT:    retq
entry:
  %shr = ashr i8 %v, 4
  %ext = zext i8 %shr to i64
  %shl = shl i64 %ext, 4
  ret i64 %shl
}

define i64 @fun8(i16 zeroext %v) {
; CHECK-LABEL: fun8:
; CHECK:       # %bb.0: # %entry
; CHECK-NEXT:    movswl %di, %eax
; CHECK-NEXT:    shrl $4, %eax
; CHECK-NEXT:    movzwl %ax, %eax
; CHECK-NEXT:    shlq $4, %rax
; CHECK-NEXT:    retq
entry:
  %shr = ashr i16 %v, 4
  %ext = zext i16 %shr to i64
  %shl = shl i64 %ext, 4
  ret i64 %shl
}

define i64 @fun9(i32 zeroext %v) {
; CHECK-LABEL: fun9:
; CHECK:       # %bb.0: # %entry
; CHECK-NEXT:    movl %edi, %eax
; CHECK-NEXT:    sarl $4, %eax
; CHECK-NEXT:    shlq $4, %rax
; CHECK-NEXT:    retq
entry:
  %shr = ashr i32 %v, 4
  %ext = zext i32 %shr to i64
  %shl = shl i64 %ext, 4
  ret i64 %shl
}

; Don't fold the pattern if there is more than one use of the
; operand in input to the shift left.

define i64 @fun10(i8 zeroext %v) {
; CHECK-LABEL: fun10:
; CHECK:       # %bb.0: # %entry
; CHECK-NEXT:    shrb $4, %dil
; CHECK-NEXT:    movzbl %dil, %ecx
; CHECK-NEXT:    movq %rcx, %rax
; CHECK-NEXT:    shlq $4, %rax
; CHECK-NEXT:    orq %rcx, %rax
; CHECK-NEXT:    retq
entry:
  %shr = lshr i8 %v, 4
  %ext = zext i8 %shr to i64
  %shl = shl i64 %ext, 4
  %add = add i64 %shl, %ext
  ret i64 %add
}

define i64 @fun11(i16 zeroext %v) {
; CHECK-LABEL: fun11:
; CHECK:       # %bb.0: # %entry
; CHECK-NEXT:    # kill: def $edi killed $edi def $rdi
; CHECK-NEXT:    shrl $4, %edi
; CHECK-NEXT:    movq %rdi, %rax
; CHECK-NEXT:    shlq $4, %rax
; CHECK-NEXT:    leaq (%rax,%rdi), %rax
; CHECK-NEXT:    retq
entry:
  %shr = lshr i16 %v, 4
  %ext = zext i16 %shr to i64
  %shl = shl i64 %ext, 4
  %add = add i64 %shl, %ext
  ret i64 %add
}

define i64 @fun12(i32 zeroext %v) {
; CHECK-LABEL: fun12:
; CHECK:       # %bb.0: # %entry
; CHECK-NEXT:    # kill: def $edi killed $edi def $rdi
; CHECK-NEXT:    shrl $4, %edi
; CHECK-NEXT:    movq %rdi, %rax
; CHECK-NEXT:    shlq $4, %rax
; CHECK-NEXT:    leaq (%rax,%rdi), %rax
; CHECK-NEXT:    retq
entry:
  %shr = lshr i32 %v, 4
  %ext = zext i32 %shr to i64
  %shl = shl i64 %ext, 4
  %add = add i64 %shl, %ext
  ret i64 %add
}

; PR17380
; Make sure that the combined dags are legal if we run the DAGCombiner after
; Legalization took place. The add instruction is redundant and increases by
; one the number of uses of the zext. This prevents the transformation from
; firing before dags are legalized and optimized.
; Once the add is removed, the number of uses becomes one and therefore the
; dags are canonicalized. After Legalization, we need to make sure that the
; valuetype for the shift count is legal.
; Verify also that we correctly fold the shl-shr sequence into an
; AND with bitmask.

define void @g(i32 %a) {
; CHECK-LABEL: g:
; CHECK:       # %bb.0:
; CHECK-NEXT:    # kill: def $edi killed $edi def $rdi
; CHECK-NEXT:    andl $-4, %edi
; CHECK-NEXT:    jmp f # TAILCALL
  %b = lshr i32 %a, 2
  %c = zext i32 %b to i64
  %d = add i64 %c, 1
  %e = shl i64 %c, 2
  tail call void @f(i64 %e)
  ret void
}

declare void @f(i64)