// RUN: not llvm-mc -triple=aarch64 -show-encoding -mattr=+sve  2>&1 < %s| FileCheck %s

// --------------------------------------------------------------------------//
// Immediate out of lower bound [-8, 7].

ld1d z28.d, p2/z, [x28, #-9, MUL VL]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: index must be an integer in range [-8, 7].
// CHECK-NEXT: ld1d z28.d, p2/z, [x28, #-9, MUL VL]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d z27.d, p1/z, [x26, #8, MUL VL]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: index must be an integer in range [-8, 7].
// CHECK-NEXT: ld1d z27.d, p1/z, [x26, #8, MUL VL]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:


// --------------------------------------------------------------------------//
// restricted predicate has range [0, 7].

ld1d z4.d, p8/z, [x11, #1, MUL VL]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: restricted predicate has range [0, 7].
// CHECK-NEXT: ld1d z4.d, p8/z, [x11, #1, MUL VL]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:


// --------------------------------------------------------------------------//
// Invalid vector list.

ld1d { }, p0/z, [x1, #1, MUL VL]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: vector register expected
// CHECK-NEXT: ld1d { }, p0/z, [x1, #1, MUL VL]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d { z1.d, z2.d }, p0/z, [x1, #1, MUL VL]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: invalid operand
// CHECK-NEXT: ld1d { z1.d, z2.d }, p0/z, [x1, #1, MUL VL]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d { v0.2d }, p0/z, [x1, #1, MUL VL]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: invalid operand
// CHECK-NEXT: ld1d { v0.2d }, p0/z, [x1, #1, MUL VL]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:


// --------------------------------------------------------------------------//
// Invalid scalar + scalar addressing modes

ld1d z0.d, p0/z, [x0, x0]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: register must be x0..x30 with required shift 'lsl #3'
// CHECK-NEXT: ld1d z0.d, p0/z, [x0, x0]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d z0.d, p0/z, [x0, xzr]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: register must be x0..x30 with required shift 'lsl #3'
// CHECK-NEXT: ld1d z0.d, p0/z, [x0, xzr]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d z0.d, p0/z, [x0, x0, lsl #2]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: register must be x0..x30 with required shift 'lsl #3'
// CHECK-NEXT: ld1d z0.d, p0/z, [x0, x0, lsl #2]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d z0.d, p0/z, [x0, w0]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: register must be x0..x30 with required shift 'lsl #3'
// CHECK-NEXT: ld1d z0.d, p0/z, [x0, w0]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d z0.d, p0/z, [x0, w0, uxtw]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: register must be x0..x30 with required shift 'lsl #3'
// CHECK-NEXT: ld1d z0.d, p0/z, [x0, w0, uxtw]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:


// --------------------------------------------------------------------------//
// Invalid scalar + vector addressing modes

ld1d z0.d, p0/z, [x0, z0.s]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: invalid operand
// CHECK-NEXT: ld1d z0.d, p0/z, [x0, z0.s]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d z0.d, p0/z, [x0, z0.d, uxtw #2]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: invalid shift/extend specified, expected 'z[0..31].d, (lsl|uxtw|sxtw) #3'
// CHECK-NEXT: ld1d z0.d, p0/z, [x0, z0.d, uxtw #2]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d z0.d, p0/z, [x0, z0.d, lsl #2]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: invalid shift/extend specified, expected 'z[0..31].d, (lsl|uxtw|sxtw) #3'
// CHECK-NEXT: ld1d z0.d, p0/z, [x0, z0.d, lsl #2]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d z0.d, p0/z, [x0, z0.d, lsl]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: expected #imm after shift specifier
// CHECK-NEXT: ld1d z0.d, p0/z, [x0, z0.d, lsl]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:


// --------------------------------------------------------------------------//
// Invalid vector + immediate addressing modes

ld1d z0.s, p0/z, [z0.s]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: invalid element width
// CHECK-NEXT: ld1d z0.s, p0/z, [z0.s]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d z0.s, p0/z, [z0.s, #8]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: invalid element width
// CHECK-NEXT: ld1d z0.s, p0/z, [z0.s, #8]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d z0.d, p0/z, [z0.d, #-8]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: index must be a multiple of 8 in range [0, 248].
// CHECK-NEXT: ld1d z0.d, p0/z, [z0.d, #-8]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d z0.d, p0/z, [z0.d, #-1]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: index must be a multiple of 8 in range [0, 248].
// CHECK-NEXT: ld1d z0.d, p0/z, [z0.d, #-1]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d z0.d, p0/z, [z0.d, #249]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: index must be a multiple of 8 in range [0, 248].
// CHECK-NEXT: ld1d z0.d, p0/z, [z0.d, #249]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d z0.d, p0/z, [z0.d, #256]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: index must be a multiple of 8 in range [0, 248].
// CHECK-NEXT: ld1d z0.d, p0/z, [z0.d, #256]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

ld1d z0.d, p0/z, [z0.d, #3]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: index must be a multiple of 8 in range [0, 248].
// CHECK-NEXT: ld1d z0.d, p0/z, [z0.d, #3]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:


// --------------------------------------------------------------------------//
// Negative tests for instructions that are incompatible with movprfx

movprfx z0.d, p0/z, z7.d
ld1d    { z0.d }, p0/z, [z0.d]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: instruction is unpredictable when following a movprfx, suggest replacing movprfx with mov
// CHECK-NEXT: ld1d    { z0.d }, p0/z, [z0.d]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}:

movprfx z0, z7
ld1d    { z0.d }, p0/z, [z0.d]
// CHECK: [[@LINE-1]]:{{[0-9]+}}: error: instruction is unpredictable when following a movprfx, suggest replacing movprfx with mov
// CHECK-NEXT: ld1d    { z0.d }, p0/z, [z0.d]
// CHECK-NOT: [[@LINE-1]]:{{[0-9]+}}: