blob: 08fb62eeb7de027ca2f2fcd0241355fa289404e5 [file] [log] [blame]
; Test 128-bit subtraction in which the second operand is variable.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z10 | FileCheck %s
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z196 | FileCheck %s
declare i128 *@foo()
; Test register addition.
define void @f1(i128 *%ptr, i64 %high, i64 %low) {
; CHECK-LABEL: f1:
; CHECK: slgr {{%r[0-5]}}, %r4
; CHECK: slbgr {{%r[0-5]}}, %r3
; CHECK: br %r14
%a = load i128, i128 *%ptr
%highx = zext i64 %high to i128
%lowx = zext i64 %low to i128
%bhigh = shl i128 %highx, 64
%b = or i128 %bhigh, %lowx
%sub = sub i128 %a, %b
store i128 %sub, i128 *%ptr
ret void
}
; Test memory addition with no offset.
define void @f2(i64 %addr) {
; CHECK-LABEL: f2:
; CHECK: slg {{%r[0-5]}}, 8(%r2)
; CHECK: slbg {{%r[0-5]}}, 0(%r2)
; CHECK: br %r14
%bptr = inttoptr i64 %addr to i128 *
%aptr = getelementptr i128, i128 *%bptr, i64 -8
%a = load i128, i128 *%aptr
%b = load i128, i128 *%bptr
%sub = sub i128 %a, %b
store i128 %sub, i128 *%aptr
ret void
}
; Test the highest aligned offset that is in range of both SLG and SLBG.
define void @f3(i64 %base) {
; CHECK-LABEL: f3:
; CHECK: slg {{%r[0-5]}}, 524280(%r2)
; CHECK: slbg {{%r[0-5]}}, 524272(%r2)
; CHECK: br %r14
%addr = add i64 %base, 524272
%bptr = inttoptr i64 %addr to i128 *
%aptr = getelementptr i128, i128 *%bptr, i64 -8
%a = load i128, i128 *%aptr
%b = load i128, i128 *%bptr
%sub = sub i128 %a, %b
store i128 %sub, i128 *%aptr
ret void
}
; Test the next doubleword up, which requires separate address logic for SLG.
define void @f4(i64 %base) {
; CHECK-LABEL: f4:
; CHECK: lgr [[BASE:%r[1-5]]], %r2
; CHECK: agfi [[BASE]], 524288
; CHECK: slg {{%r[0-5]}}, 0([[BASE]])
; CHECK: slbg {{%r[0-5]}}, 524280(%r2)
; CHECK: br %r14
%addr = add i64 %base, 524280
%bptr = inttoptr i64 %addr to i128 *
%aptr = getelementptr i128, i128 *%bptr, i64 -8
%a = load i128, i128 *%aptr
%b = load i128, i128 *%bptr
%sub = sub i128 %a, %b
store i128 %sub, i128 *%aptr
ret void
}
; Test the next doubleword after that, which requires separate logic for
; both instructions. It would be better to create an anchor at 524288
; that both instructions can use, but that isn't implemented yet.
define void @f5(i64 %base) {
; CHECK-LABEL: f5:
; CHECK: slg {{%r[0-5]}}, 0({{%r[1-5]}})
; CHECK: slbg {{%r[0-5]}}, 0({{%r[1-5]}})
; CHECK: br %r14
%addr = add i64 %base, 524288
%bptr = inttoptr i64 %addr to i128 *
%aptr = getelementptr i128, i128 *%bptr, i64 -8
%a = load i128, i128 *%aptr
%b = load i128, i128 *%bptr
%sub = sub i128 %a, %b
store i128 %sub, i128 *%aptr
ret void
}
; Test the lowest displacement that is in range of both SLG and SLBG.
define void @f6(i64 %base) {
; CHECK-LABEL: f6:
; CHECK: slg {{%r[0-5]}}, -524280(%r2)
; CHECK: slbg {{%r[0-5]}}, -524288(%r2)
; CHECK: br %r14
%addr = add i64 %base, -524288
%bptr = inttoptr i64 %addr to i128 *
%aptr = getelementptr i128, i128 *%bptr, i64 -8
%a = load i128, i128 *%aptr
%b = load i128, i128 *%bptr
%sub = sub i128 %a, %b
store i128 %sub, i128 *%aptr
ret void
}
; Test the next doubleword down, which is out of range of the SLBG.
define void @f7(i64 %base) {
; CHECK-LABEL: f7:
; CHECK: slg {{%r[0-5]}}, -524288(%r2)
; CHECK: slbg {{%r[0-5]}}, 0({{%r[1-5]}})
; CHECK: br %r14
%addr = add i64 %base, -524296
%bptr = inttoptr i64 %addr to i128 *
%aptr = getelementptr i128, i128 *%bptr, i64 -8
%a = load i128, i128 *%aptr
%b = load i128, i128 *%bptr
%sub = sub i128 %a, %b
store i128 %sub, i128 *%aptr
ret void
}
; Check that subtractions of spilled values can use SLG and SLBG rather than
; SLGR and SLBGR.
define void @f8(i128 *%ptr0) {
; CHECK-LABEL: f8:
; CHECK: brasl %r14, foo@PLT
; CHECK: slg {{%r[0-9]+}}, {{[0-9]+}}(%r15)
; CHECK: slbg {{%r[0-9]+}}, {{[0-9]+}}(%r15)
; CHECK: br %r14
%ptr1 = getelementptr i128, i128 *%ptr0, i128 2
%ptr2 = getelementptr i128, i128 *%ptr0, i128 4
%ptr3 = getelementptr i128, i128 *%ptr0, i128 6
%ptr4 = getelementptr i128, i128 *%ptr0, i128 8
%ptr5 = getelementptr i128, i128 *%ptr0, i128 10
%val0 = load i128, i128 *%ptr0
%val1 = load i128, i128 *%ptr1
%val2 = load i128, i128 *%ptr2
%val3 = load i128, i128 *%ptr3
%val4 = load i128, i128 *%ptr4
%val5 = load i128, i128 *%ptr5
%retptr = call i128 *@foo()
%ret = load i128, i128 *%retptr
%sub0 = sub i128 %ret, %val0
%sub1 = sub i128 %sub0, %val1
%sub2 = sub i128 %sub1, %val2
%sub3 = sub i128 %sub2, %val3
%sub4 = sub i128 %sub3, %val4
%sub5 = sub i128 %sub4, %val5
store i128 %sub5, i128 *%retptr
ret void
}