//===- NVPTXInstrInfo.td - NVPTX Instruction defs -------------*- tblgen-*-===//
//
//                     The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file describes the PTX instructions in TableGen format.
//
//===----------------------------------------------------------------------===//

include "NVPTXInstrFormats.td"

// A NOP instruction
def NOP : NVPTXInst<(outs), (ins), "", []>;

// List of vector specific properties
def isVecLD      : VecInstTypeEnum<1>;
def isVecST      : VecInstTypeEnum<2>;
def isVecBuild   : VecInstTypeEnum<3>;
def isVecShuffle : VecInstTypeEnum<4>;
def isVecExtract : VecInstTypeEnum<5>;
def isVecInsert  : VecInstTypeEnum<6>;
def isVecDest    : VecInstTypeEnum<7>;
def isVecOther   : VecInstTypeEnum<15>;

//===----------------------------------------------------------------------===//
// NVPTX Operand Definitions.
//===----------------------------------------------------------------------===//

def brtarget    : Operand<OtherVT>;

// CVT conversion modes
// These must match the enum in NVPTX.h
def CvtNONE : PatLeaf<(i32 0x0)>;
def CvtRNI  : PatLeaf<(i32 0x1)>;
def CvtRZI  : PatLeaf<(i32 0x2)>;
def CvtRMI  : PatLeaf<(i32 0x3)>;
def CvtRPI  : PatLeaf<(i32 0x4)>;
def CvtRN   : PatLeaf<(i32 0x5)>;
def CvtRZ   : PatLeaf<(i32 0x6)>;
def CvtRM   : PatLeaf<(i32 0x7)>;
def CvtRP   : PatLeaf<(i32 0x8)>;

def CvtNONE_FTZ : PatLeaf<(i32 0x10)>;
def CvtRNI_FTZ  : PatLeaf<(i32 0x11)>;
def CvtRZI_FTZ  : PatLeaf<(i32 0x12)>;
def CvtRMI_FTZ  : PatLeaf<(i32 0x13)>;
def CvtRPI_FTZ  : PatLeaf<(i32 0x14)>;
def CvtRN_FTZ   : PatLeaf<(i32 0x15)>;
def CvtRZ_FTZ   : PatLeaf<(i32 0x16)>;
def CvtRM_FTZ   : PatLeaf<(i32 0x17)>;
def CvtRP_FTZ   : PatLeaf<(i32 0x18)>;

def CvtSAT      : PatLeaf<(i32 0x20)>;
def CvtSAT_FTZ  : PatLeaf<(i32 0x30)>;

def CvtMode : Operand<i32> {
  let PrintMethod = "printCvtMode";
}

// Compare modes
// These must match the enum in NVPTX.h
def CmpEQ   : PatLeaf<(i32 0)>;
def CmpNE   : PatLeaf<(i32 1)>;
def CmpLT   : PatLeaf<(i32 2)>;
def CmpLE   : PatLeaf<(i32 3)>;
def CmpGT   : PatLeaf<(i32 4)>;
def CmpGE   : PatLeaf<(i32 5)>;
def CmpLO   : PatLeaf<(i32 6)>;
def CmpLS   : PatLeaf<(i32 7)>;
def CmpHI   : PatLeaf<(i32 8)>;
def CmpHS   : PatLeaf<(i32 9)>;
def CmpEQU  : PatLeaf<(i32 10)>;
def CmpNEU  : PatLeaf<(i32 11)>;
def CmpLTU  : PatLeaf<(i32 12)>;
def CmpLEU  : PatLeaf<(i32 13)>;
def CmpGTU  : PatLeaf<(i32 14)>;
def CmpGEU  : PatLeaf<(i32 15)>;
def CmpNUM  : PatLeaf<(i32 16)>;
def CmpNAN  : PatLeaf<(i32 17)>;

def CmpEQ_FTZ   : PatLeaf<(i32 0x100)>;
def CmpNE_FTZ   : PatLeaf<(i32 0x101)>;
def CmpLT_FTZ   : PatLeaf<(i32 0x102)>;
def CmpLE_FTZ   : PatLeaf<(i32 0x103)>;
def CmpGT_FTZ   : PatLeaf<(i32 0x104)>;
def CmpGE_FTZ   : PatLeaf<(i32 0x105)>;
def CmpLO_FTZ   : PatLeaf<(i32 0x106)>;
def CmpLS_FTZ   : PatLeaf<(i32 0x107)>;
def CmpHI_FTZ   : PatLeaf<(i32 0x108)>;
def CmpHS_FTZ   : PatLeaf<(i32 0x109)>;
def CmpEQU_FTZ  : PatLeaf<(i32 0x10A)>;
def CmpNEU_FTZ  : PatLeaf<(i32 0x10B)>;
def CmpLTU_FTZ  : PatLeaf<(i32 0x10C)>;
def CmpLEU_FTZ  : PatLeaf<(i32 0x10D)>;
def CmpGTU_FTZ  : PatLeaf<(i32 0x10E)>;
def CmpGEU_FTZ  : PatLeaf<(i32 0x10F)>;
def CmpNUM_FTZ  : PatLeaf<(i32 0x110)>;
def CmpNAN_FTZ  : PatLeaf<(i32 0x111)>;

def CmpMode : Operand<i32> {
  let PrintMethod = "printCmpMode";
}

def F32ConstZero : Operand<f32>, PatLeaf<(f32 fpimm)>, SDNodeXForm<fpimm, [{
    return CurDAG->getTargetConstantFP(0.0, MVT::f32);
  }]>;
def F32ConstOne : Operand<f32>, PatLeaf<(f32 fpimm)>, SDNodeXForm<fpimm, [{
    return CurDAG->getTargetConstantFP(1.0, MVT::f32);
  }]>;

//===----------------------------------------------------------------------===//
// NVPTX Instruction Predicate Definitions
//===----------------------------------------------------------------------===//


def hasAtomRedG32 : Predicate<"Subtarget.hasAtomRedG32()">;
def hasAtomRedS32 : Predicate<"Subtarget.hasAtomRedS32()">;
def hasAtomRedGen32 : Predicate<"Subtarget.hasAtomRedGen32()">;
def useAtomRedG32forGen32 :
  Predicate<"!Subtarget.hasAtomRedGen32() && Subtarget.hasAtomRedG32()">;
def hasBrkPt : Predicate<"Subtarget.hasBrkPt()">;
def hasAtomRedG64 : Predicate<"Subtarget.hasAtomRedG64()">;
def hasAtomRedS64 : Predicate<"Subtarget.hasAtomRedS64()">;
def hasAtomRedGen64 : Predicate<"Subtarget.hasAtomRedGen64()">;
def useAtomRedG64forGen64 :
  Predicate<"!Subtarget.hasAtomRedGen64() && Subtarget.hasAtomRedG64()">;
def hasAtomAddF32 : Predicate<"Subtarget.hasAtomAddF32()">;
def hasVote : Predicate<"Subtarget.hasVote()">;
def hasDouble : Predicate<"Subtarget.hasDouble()">;
def reqPTX20 : Predicate<"Subtarget.reqPTX20()">;
def hasLDG : Predicate<"Subtarget.hasLDG()">;
def hasLDU : Predicate<"Subtarget.hasLDU()">;
def hasGenericLdSt : Predicate<"Subtarget.hasGenericLdSt()">;

def doF32FTZ : Predicate<"useF32FTZ()">;
def doNoF32FTZ : Predicate<"!useF32FTZ()">;

def doMulWide      : Predicate<"doMulWide">;

def allowFMA : Predicate<"allowFMA()">;
def noFMA : Predicate<"!allowFMA()">;

def do_DIVF32_APPROX : Predicate<"getDivF32Level()==0">;
def do_DIVF32_FULL : Predicate<"getDivF32Level()==1">;

def do_SQRTF32_APPROX : Predicate<"!usePrecSqrtF32()">;
def do_SQRTF32_RN : Predicate<"usePrecSqrtF32()">;

def hasHWROT32 : Predicate<"Subtarget.hasHWROT32()">;
def noHWROT32 : Predicate<"!Subtarget.hasHWROT32()">;

def true : Predicate<"1">;

def hasPTX31 : Predicate<"Subtarget.getPTXVersion() >= 31">;


//===----------------------------------------------------------------------===//
// Some Common Instruction Class Templates
//===----------------------------------------------------------------------===//

multiclass I3<string OpcStr, SDNode OpNode> {
  def i64rr : NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$a, Int64Regs:$b),
                     !strconcat(OpcStr, "64 \t$dst, $a, $b;"),
                     [(set Int64Regs:$dst, (OpNode Int64Regs:$a,
                       Int64Regs:$b))]>;
  def i64ri : NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$a, i64imm:$b),
                     !strconcat(OpcStr, "64 \t$dst, $a, $b;"),
                     [(set Int64Regs:$dst, (OpNode Int64Regs:$a, imm:$b))]>;
  def i32rr : NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$a, Int32Regs:$b),
                     !strconcat(OpcStr, "32 \t$dst, $a, $b;"),
                     [(set Int32Regs:$dst, (OpNode Int32Regs:$a,
                       Int32Regs:$b))]>;
  def i32ri : NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$a, i32imm:$b),
                     !strconcat(OpcStr, "32 \t$dst, $a, $b;"),
                     [(set Int32Regs:$dst, (OpNode Int32Regs:$a, imm:$b))]>;
  def i16rr : NVPTXInst<(outs Int16Regs:$dst), (ins Int16Regs:$a, Int16Regs:$b),
                     !strconcat(OpcStr, "16 \t$dst, $a, $b;"),
                     [(set Int16Regs:$dst, (OpNode Int16Regs:$a,
                       Int16Regs:$b))]>;
  def i16ri : NVPTXInst<(outs Int16Regs:$dst), (ins Int16Regs:$a, i16imm:$b),
                     !strconcat(OpcStr, "16 \t$dst, $a, $b;"),
                     [(set Int16Regs:$dst, (OpNode Int16Regs:$a, (imm):$b))]>;
}

multiclass ADD_SUB_INT_32<string OpcStr, SDNode OpNode> {
   def i32rr : NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$a,
       Int32Regs:$b),
                      !strconcat(OpcStr, ".s32 \t$dst, $a, $b;"),
                      [(set Int32Regs:$dst, (OpNode Int32Regs:$a,
                        Int32Regs:$b))]>;
   def i32ri : NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$a, i32imm:$b),
                      !strconcat(OpcStr, ".s32 \t$dst, $a, $b;"),
                      [(set Int32Regs:$dst, (OpNode Int32Regs:$a, imm:$b))]>;
}

multiclass F3<string OpcStr, SDNode OpNode> {
   def f64rr : NVPTXInst<(outs Float64Regs:$dst),
                      (ins Float64Regs:$a, Float64Regs:$b),
                      !strconcat(OpcStr, ".f64 \t$dst, $a, $b;"),
                      [(set Float64Regs:$dst,
                        (OpNode Float64Regs:$a, Float64Regs:$b))]>,
                      Requires<[allowFMA]>;
   def f64ri : NVPTXInst<(outs Float64Regs:$dst),
                      (ins Float64Regs:$a, f64imm:$b),
                      !strconcat(OpcStr, ".f64 \t$dst, $a, $b;"),
                      [(set Float64Regs:$dst,
                        (OpNode Float64Regs:$a, fpimm:$b))]>,
                      Requires<[allowFMA]>;
   def f32rr_ftz : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, Float32Regs:$b),
                      !strconcat(OpcStr, ".ftz.f32 \t$dst, $a, $b;"),
                      [(set Float32Regs:$dst,
                        (OpNode Float32Regs:$a, Float32Regs:$b))]>,
                      Requires<[allowFMA, doF32FTZ]>;
   def f32ri_ftz : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, f32imm:$b),
                      !strconcat(OpcStr, ".ftz.f32 \t$dst, $a, $b;"),
                      [(set Float32Regs:$dst,
                        (OpNode Float32Regs:$a, fpimm:$b))]>,
                      Requires<[allowFMA, doF32FTZ]>;
   def f32rr : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, Float32Regs:$b),
                      !strconcat(OpcStr, ".f32 \t$dst, $a, $b;"),
                      [(set Float32Regs:$dst,
                        (OpNode Float32Regs:$a, Float32Regs:$b))]>,
                      Requires<[allowFMA]>;
   def f32ri : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, f32imm:$b),
                      !strconcat(OpcStr, ".f32 \t$dst, $a, $b;"),
                      [(set Float32Regs:$dst,
                        (OpNode Float32Regs:$a, fpimm:$b))]>,
                      Requires<[allowFMA]>;
}

multiclass F3_rn<string OpcStr, SDNode OpNode> {
   def f64rr : NVPTXInst<(outs Float64Regs:$dst),
                      (ins Float64Regs:$a, Float64Regs:$b),
                      !strconcat(OpcStr, ".rn.f64 \t$dst, $a, $b;"),
                      [(set Float64Regs:$dst,
                        (OpNode Float64Regs:$a, Float64Regs:$b))]>,
                      Requires<[noFMA]>;
   def f64ri : NVPTXInst<(outs Float64Regs:$dst),
                      (ins Float64Regs:$a, f64imm:$b),
                      !strconcat(OpcStr, ".rn.f64 \t$dst, $a, $b;"),
                      [(set Float64Regs:$dst,
                        (OpNode Float64Regs:$a, fpimm:$b))]>,
                      Requires<[noFMA]>;
   def f32rr_ftz : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, Float32Regs:$b),
                      !strconcat(OpcStr, ".rn.ftz.f32 \t$dst, $a, $b;"),
                      [(set Float32Regs:$dst,
                        (OpNode Float32Regs:$a, Float32Regs:$b))]>,
                      Requires<[noFMA, doF32FTZ]>;
   def f32ri_ftz : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, f32imm:$b),
                      !strconcat(OpcStr, ".rn.ftz.f32 \t$dst, $a, $b;"),
                      [(set Float32Regs:$dst,
                        (OpNode Float32Regs:$a, fpimm:$b))]>,
                      Requires<[noFMA, doF32FTZ]>;
   def f32rr : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, Float32Regs:$b),
                      !strconcat(OpcStr, ".rn.f32 \t$dst, $a, $b;"),
                      [(set Float32Regs:$dst,
                        (OpNode Float32Regs:$a, Float32Regs:$b))]>,
                      Requires<[noFMA]>;
   def f32ri : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, f32imm:$b),
                      !strconcat(OpcStr, ".rn.f32 \t$dst, $a, $b;"),
                      [(set Float32Regs:$dst,
                        (OpNode Float32Regs:$a, fpimm:$b))]>,
                      Requires<[noFMA]>;
}

multiclass F2<string OpcStr, SDNode OpNode> {
   def f64 : NVPTXInst<(outs Float64Regs:$dst), (ins Float64Regs:$a),
                      !strconcat(OpcStr, ".f64 \t$dst, $a;"),
                      [(set Float64Regs:$dst, (OpNode Float64Regs:$a))]>;
   def f32_ftz : NVPTXInst<(outs Float32Regs:$dst), (ins Float32Regs:$a),
                      !strconcat(OpcStr, ".ftz.f32 \t$dst, $a;"),
                      [(set Float32Regs:$dst, (OpNode Float32Regs:$a))]>,
                      Requires<[doF32FTZ]>;
   def f32 : NVPTXInst<(outs Float32Regs:$dst), (ins Float32Regs:$a),
                      !strconcat(OpcStr, ".f32 \t$dst, $a;"),
                      [(set Float32Regs:$dst, (OpNode Float32Regs:$a))]>;
}

//===----------------------------------------------------------------------===//
// NVPTX Instructions.
//===----------------------------------------------------------------------===//

//-----------------------------------
// General Type Conversion
//-----------------------------------

let hasSideEffects = 0 in {
// Generate a cvt to the given type from all possible types.
// Each instance takes a CvtMode immediate that defines the conversion mode to
// use.  It can be CvtNONE to omit a conversion mode.
multiclass CVT_FROM_ALL<string FromName, RegisterClass RC> {
  def _s16 : NVPTXInst<(outs RC:$dst),
                       (ins Int16Regs:$src, CvtMode:$mode),
                       !strconcat("cvt${mode:base}${mode:ftz}${mode:sat}.",
                       FromName, ".s16\t$dst, $src;"),
                       []>;
  def _u16 : NVPTXInst<(outs RC:$dst),
                       (ins Int16Regs:$src, CvtMode:$mode),
                       !strconcat("cvt${mode:base}${mode:ftz}${mode:sat}.",
                       FromName, ".u16\t$dst, $src;"),
                       []>;
  def _f16 : NVPTXInst<(outs RC:$dst),
                       (ins Int16Regs:$src, CvtMode:$mode),
                       !strconcat("cvt${mode:base}${mode:ftz}${mode:sat}.",
                       FromName, ".f16\t$dst, $src;"),
                       []>;
  def _s32 : NVPTXInst<(outs RC:$dst),
                       (ins Int32Regs:$src, CvtMode:$mode),
                       !strconcat("cvt${mode:base}${mode:ftz}${mode:sat}.",
                       FromName, ".s32\t$dst, $src;"),
                       []>;
  def _u32 : NVPTXInst<(outs RC:$dst),
                       (ins Int32Regs:$src, CvtMode:$mode),
                       !strconcat("cvt${mode:base}${mode:ftz}${mode:sat}.",
                       FromName, ".u32\t$dst, $src;"),
                       []>;
  def _s64 : NVPTXInst<(outs RC:$dst),
                       (ins Int64Regs:$src, CvtMode:$mode),
                       !strconcat("cvt${mode:base}${mode:ftz}${mode:sat}.",
                       FromName, ".s64\t$dst, $src;"),
                       []>;
  def _u64 : NVPTXInst<(outs RC:$dst),
                       (ins Int64Regs:$src, CvtMode:$mode),
                       !strconcat("cvt${mode:base}${mode:ftz}${mode:sat}.",
                       FromName, ".u64\t$dst, $src;"),
                       []>;
  def _f32 : NVPTXInst<(outs RC:$dst),
                       (ins Float32Regs:$src, CvtMode:$mode),
                       !strconcat("cvt${mode:base}${mode:ftz}${mode:sat}.",
                       FromName, ".f32\t$dst, $src;"),
                       []>;
  def _f64 : NVPTXInst<(outs RC:$dst),
                       (ins Float64Regs:$src, CvtMode:$mode),
                       !strconcat("cvt${mode:base}${mode:ftz}${mode:sat}.",
                       FromName, ".f64\t$dst, $src;"),
                       []>;
}

// Generate a cvt to all possible types.
defm CVT_s16 : CVT_FROM_ALL<"s16", Int16Regs>;
defm CVT_u16 : CVT_FROM_ALL<"u16", Int16Regs>;
defm CVT_f16 : CVT_FROM_ALL<"f16", Int16Regs>;
defm CVT_s32 : CVT_FROM_ALL<"s32", Int32Regs>;
defm CVT_u32 : CVT_FROM_ALL<"u32", Int32Regs>;
defm CVT_s64 : CVT_FROM_ALL<"s64", Int64Regs>;
defm CVT_u64 : CVT_FROM_ALL<"u64", Int64Regs>;
defm CVT_f32 : CVT_FROM_ALL<"f32", Float32Regs>;
defm CVT_f64 : CVT_FROM_ALL<"f64", Float64Regs>;

// This set of cvt is different from the above. The type of the source
// and target are the same.
//
def CVT_INREG_s16_s8 : NVPTXInst<(outs Int16Regs:$dst), (ins Int16Regs:$src),
                        "cvt.s16.s8 \t$dst, $src;", []>;
def CVT_INREG_s32_s8 : NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$src),
                        "cvt.s32.s8 \t$dst, $src;", []>;
def CVT_INREG_s32_s16 : NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$src),
                        "cvt.s32.s16 \t$dst, $src;", []>;
def CVT_INREG_s64_s8 : NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$src),
                        "cvt.s64.s8 \t$dst, $src;", []>;
def CVT_INREG_s64_s16 : NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$src),
                        "cvt.s64.s16 \t$dst, $src;", []>;
def CVT_INREG_s64_s32 : NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$src),
                        "cvt.s64.s32 \t$dst, $src;", []>;
}

//-----------------------------------
// Integer Arithmetic
//-----------------------------------

multiclass ADD_SUB_i1<SDNode OpNode> {
   def _rr: NVPTXInst<(outs Int1Regs:$dst), (ins Int1Regs:$a, Int1Regs:$b),
          "xor.pred \t$dst, $a, $b;",
      [(set Int1Regs:$dst, (OpNode Int1Regs:$a, Int1Regs:$b))]>;
   def _ri: NVPTXInst<(outs Int1Regs:$dst), (ins Int1Regs:$a, i1imm:$b),
          "xor.pred \t$dst, $a, $b;",
      [(set Int1Regs:$dst, (OpNode Int1Regs:$a, (imm):$b))]>;
}

defm ADD_i1 : ADD_SUB_i1<add>;
defm SUB_i1 : ADD_SUB_i1<sub>;


defm ADD : I3<"add.s", add>;
defm SUB : I3<"sub.s", sub>;

defm ADDCC : ADD_SUB_INT_32<"add.cc", addc>;
defm SUBCC : ADD_SUB_INT_32<"sub.cc", subc>;

defm ADDCCC : ADD_SUB_INT_32<"addc.cc", adde>;
defm SUBCCC : ADD_SUB_INT_32<"subc.cc", sube>;

//mul.wide PTX instruction
def SInt32Const : PatLeaf<(imm), [{
  const APInt &v = N->getAPIntValue();
  if (v.isSignedIntN(32))
    return true;
  return false;
}]>;

def UInt32Const : PatLeaf<(imm), [{
  const APInt &v = N->getAPIntValue();
  if (v.isIntN(32))
    return true;
  return false;
}]>;

def SInt16Const : PatLeaf<(imm), [{
  const APInt &v = N->getAPIntValue();
  if (v.isSignedIntN(16))
    return true;
  return false;
}]>;

def UInt16Const : PatLeaf<(imm), [{
  const APInt &v = N->getAPIntValue();
  if (v.isIntN(16))
    return true;
  return false;
}]>;

def Int5Const : PatLeaf<(imm), [{
  const APInt &v = N->getAPIntValue();
  // Check if 0 <= v < 32
  // Only then the result from (x << v) will be i32
  if (v.sge(0) && v.slt(32))
    return true;
  return false;
}]>;

def Int4Const : PatLeaf<(imm), [{
  const APInt &v = N->getAPIntValue();
  // Check if 0 <= v < 16
  // Only then the result from (x << v) will be i16
  if (v.sge(0) && v.slt(16))
    return true;
  return false;
}]>;

def SHL2MUL32 : SDNodeXForm<imm, [{
  const APInt &v = N->getAPIntValue();
  APInt temp(32, 1);
  return CurDAG->getTargetConstant(temp.shl(v), MVT::i32);
}]>;

def SHL2MUL16 : SDNodeXForm<imm, [{
  const APInt &v = N->getAPIntValue();
  APInt temp(16, 1);
  return CurDAG->getTargetConstant(temp.shl(v), MVT::i16);
}]>;

def MULWIDES64
  : NVPTXInst<(outs Int64Regs:$dst), (ins Int32Regs:$a, Int32Regs:$b),
              "mul.wide.s32 \t$dst, $a, $b;", []>;
def MULWIDES64Imm
  : NVPTXInst<(outs Int64Regs:$dst), (ins Int32Regs:$a, i32imm:$b),
                           "mul.wide.s32 \t$dst, $a, $b;", []>;
def MULWIDES64Imm64
  : NVPTXInst<(outs Int64Regs:$dst), (ins Int32Regs:$a, i64imm:$b),
                           "mul.wide.s32 \t$dst, $a, $b;", []>;

def MULWIDEU64
  : NVPTXInst<(outs Int64Regs:$dst), (ins Int32Regs:$a, Int32Regs:$b),
              "mul.wide.u32 \t$dst, $a, $b;", []>;
def MULWIDEU64Imm
  : NVPTXInst<(outs Int64Regs:$dst), (ins Int32Regs:$a, i32imm:$b),
                           "mul.wide.u32 \t$dst, $a, $b;", []>;
def MULWIDEU64Imm64
  : NVPTXInst<(outs Int64Regs:$dst), (ins Int32Regs:$a, i64imm:$b),
                           "mul.wide.u32 \t$dst, $a, $b;", []>;

def MULWIDES32
  : NVPTXInst<(outs Int32Regs:$dst), (ins Int16Regs:$a, Int16Regs:$b),
                           "mul.wide.s16 \t$dst, $a, $b;", []>;
def MULWIDES32Imm
  : NVPTXInst<(outs Int32Regs:$dst), (ins Int16Regs:$a, i16imm:$b),
              "mul.wide.s16 \t$dst, $a, $b;", []>;
def MULWIDES32Imm32
  : NVPTXInst<(outs Int32Regs:$dst), (ins Int16Regs:$a, i32imm:$b),
                           "mul.wide.s16 \t$dst, $a, $b;", []>;

def MULWIDEU32
  : NVPTXInst<(outs Int32Regs:$dst), (ins Int16Regs:$a, Int16Regs:$b),
              "mul.wide.u16 \t$dst, $a, $b;", []>;
def MULWIDEU32Imm
  : NVPTXInst<(outs Int32Regs:$dst), (ins Int16Regs:$a, i16imm:$b),
                           "mul.wide.u16 \t$dst, $a, $b;", []>;
def MULWIDEU32Imm32
  : NVPTXInst<(outs Int32Regs:$dst), (ins Int16Regs:$a, i32imm:$b),
                            "mul.wide.u16 \t$dst, $a, $b;", []>;

def : Pat<(shl (sext Int32Regs:$a), (i32 Int5Const:$b)),
          (MULWIDES64Imm Int32Regs:$a, (SHL2MUL32 node:$b))>,
          Requires<[doMulWide]>;
def : Pat<(shl (zext Int32Regs:$a), (i32 Int5Const:$b)),
          (MULWIDEU64Imm Int32Regs:$a, (SHL2MUL32 node:$b))>,
          Requires<[doMulWide]>;

def : Pat<(shl (sext Int16Regs:$a), (i16 Int4Const:$b)),
          (MULWIDES32Imm Int16Regs:$a, (SHL2MUL16 node:$b))>,
          Requires<[doMulWide]>;
def : Pat<(shl (zext Int16Regs:$a), (i16 Int4Const:$b)),
          (MULWIDEU32Imm Int16Regs:$a, (SHL2MUL16 node:$b))>,
          Requires<[doMulWide]>;

def : Pat<(mul (sext Int32Regs:$a), (sext Int32Regs:$b)),
          (MULWIDES64 Int32Regs:$a, Int32Regs:$b)>,
          Requires<[doMulWide]>;
def : Pat<(mul (sext Int32Regs:$a), (i64 SInt32Const:$b)),
          (MULWIDES64Imm64 Int32Regs:$a, (i64 SInt32Const:$b))>,
          Requires<[doMulWide]>;

def : Pat<(mul (zext Int32Regs:$a), (zext Int32Regs:$b)),
          (MULWIDEU64 Int32Regs:$a, Int32Regs:$b)>,
      Requires<[doMulWide]>;
def : Pat<(mul (zext Int32Regs:$a), (i64 UInt32Const:$b)),
          (MULWIDEU64Imm64 Int32Regs:$a, (i64 UInt32Const:$b))>,
          Requires<[doMulWide]>;

def : Pat<(mul (sext Int16Regs:$a), (sext Int16Regs:$b)),
          (MULWIDES32 Int16Regs:$a, Int16Regs:$b)>,
      Requires<[doMulWide]>;
def : Pat<(mul (sext Int16Regs:$a), (i32 SInt16Const:$b)),
          (MULWIDES32Imm32 Int16Regs:$a, (i32 SInt16Const:$b))>,
          Requires<[doMulWide]>;

def : Pat<(mul (zext Int16Regs:$a), (zext Int16Regs:$b)),
          (MULWIDEU32 Int16Regs:$a, Int16Regs:$b)>,
      Requires<[doMulWide]>;
def : Pat<(mul (zext Int16Regs:$a), (i32 UInt16Const:$b)),
          (MULWIDEU32Imm32 Int16Regs:$a, (i32 UInt16Const:$b))>,
          Requires<[doMulWide]>;


def SDTMulWide
  : SDTypeProfile<1, 2, [SDTCisSameAs<1, 2>]>;
def mul_wide_signed
  : SDNode<"NVPTXISD::MUL_WIDE_SIGNED", SDTMulWide>;
def mul_wide_unsigned
  : SDNode<"NVPTXISD::MUL_WIDE_UNSIGNED", SDTMulWide>;

def : Pat<(i32 (mul_wide_signed Int16Regs:$a, Int16Regs:$b)),
          (MULWIDES32 Int16Regs:$a, Int16Regs:$b)>,
      Requires<[doMulWide]>;
def : Pat<(i32 (mul_wide_signed Int16Regs:$a, imm:$b)),
          (MULWIDES32Imm Int16Regs:$a, imm:$b)>,
          Requires<[doMulWide]>;
def : Pat<(i32 (mul_wide_unsigned Int16Regs:$a, Int16Regs:$b)),
          (MULWIDEU32 Int16Regs:$a, Int16Regs:$b)>,
          Requires<[doMulWide]>;
def : Pat<(i32 (mul_wide_unsigned Int16Regs:$a, imm:$b)),
          (MULWIDEU32Imm Int16Regs:$a, imm:$b)>,
          Requires<[doMulWide]>;


def : Pat<(i64 (mul_wide_signed Int32Regs:$a, Int32Regs:$b)),
          (MULWIDES64 Int32Regs:$a, Int32Regs:$b)>,
          Requires<[doMulWide]>;
def : Pat<(i64 (mul_wide_signed Int32Regs:$a, imm:$b)),
          (MULWIDES64Imm Int32Regs:$a, imm:$b)>,
          Requires<[doMulWide]>;
def : Pat<(i64 (mul_wide_unsigned Int32Regs:$a, Int32Regs:$b)),
          (MULWIDEU64 Int32Regs:$a, Int32Regs:$b)>,
          Requires<[doMulWide]>;
def : Pat<(i64 (mul_wide_unsigned Int32Regs:$a, imm:$b)),
          (MULWIDEU64Imm Int32Regs:$a, imm:$b)>,
          Requires<[doMulWide]>;

defm MULT : I3<"mul.lo.s", mul>;

defm MULTHS : I3<"mul.hi.s", mulhs>;
defm MULTHU : I3<"mul.hi.u", mulhu>;

defm SDIV : I3<"div.s", sdiv>;
defm UDIV : I3<"div.u", udiv>;

defm SREM : I3<"rem.s", srem>;
// The ri version will not be selected as DAGCombiner::visitSREM will lower it.
defm UREM : I3<"rem.u", urem>;
// The ri version will not be selected as DAGCombiner::visitUREM will lower it.

def SDTIMAD
  : SDTypeProfile<1, 3, [SDTCisSameAs<0, 1>, SDTCisInt<0>,
                         SDTCisInt<2>, SDTCisSameAs<0, 2>,
                         SDTCisSameAs<0, 3>]>;
def imad
  : SDNode<"NVPTXISD::IMAD", SDTIMAD>;

def MAD16rrr : NVPTXInst<(outs Int16Regs:$dst),
                      (ins Int16Regs:$a, Int16Regs:$b, Int16Regs:$c),
                      "mad.lo.s16 \t$dst, $a, $b, $c;",
                      [(set Int16Regs:$dst,
                         (imad Int16Regs:$a, Int16Regs:$b, Int16Regs:$c))]>;
def MAD16rri : NVPTXInst<(outs Int16Regs:$dst),
                      (ins Int16Regs:$a, Int16Regs:$b, i16imm:$c),
                      "mad.lo.s16 \t$dst, $a, $b, $c;",
                      [(set Int16Regs:$dst,
                         (imad Int16Regs:$a, Int16Regs:$b, imm:$c))]>;
def MAD16rir : NVPTXInst<(outs Int16Regs:$dst),
                      (ins Int16Regs:$a, i16imm:$b, Int16Regs:$c),
                      "mad.lo.s16 \t$dst, $a, $b, $c;",
                      [(set Int16Regs:$dst,
                        (imad Int16Regs:$a, imm:$b, Int16Regs:$c))]>;
def MAD16rii : NVPTXInst<(outs Int16Regs:$dst),
    (ins Int16Regs:$a, i16imm:$b, i16imm:$c),
                      "mad.lo.s16 \t$dst, $a, $b, $c;",
                      [(set Int16Regs:$dst,
                        (imad Int16Regs:$a, imm:$b, imm:$c))]>;

def MAD32rrr : NVPTXInst<(outs Int32Regs:$dst),
                      (ins Int32Regs:$a, Int32Regs:$b, Int32Regs:$c),
                      "mad.lo.s32 \t$dst, $a, $b, $c;",
                      [(set Int32Regs:$dst,
                        (imad Int32Regs:$a, Int32Regs:$b, Int32Regs:$c))]>;
def MAD32rri : NVPTXInst<(outs Int32Regs:$dst),
                      (ins Int32Regs:$a, Int32Regs:$b, i32imm:$c),
                      "mad.lo.s32 \t$dst, $a, $b, $c;",
                      [(set Int32Regs:$dst,
                        (imad Int32Regs:$a, Int32Regs:$b, imm:$c))]>;
def MAD32rir : NVPTXInst<(outs Int32Regs:$dst),
                      (ins Int32Regs:$a, i32imm:$b, Int32Regs:$c),
                      "mad.lo.s32 \t$dst, $a, $b, $c;",
                      [(set Int32Regs:$dst,
                        (imad Int32Regs:$a, imm:$b, Int32Regs:$c))]>;
def MAD32rii : NVPTXInst<(outs Int32Regs:$dst),
                      (ins Int32Regs:$a, i32imm:$b, i32imm:$c),
                      "mad.lo.s32 \t$dst, $a, $b, $c;",
                      [(set Int32Regs:$dst,
                        (imad Int32Regs:$a, imm:$b, imm:$c))]>;

def MAD64rrr : NVPTXInst<(outs Int64Regs:$dst),
                      (ins Int64Regs:$a, Int64Regs:$b, Int64Regs:$c),
                      "mad.lo.s64 \t$dst, $a, $b, $c;",
                      [(set Int64Regs:$dst,
                        (imad Int64Regs:$a, Int64Regs:$b, Int64Regs:$c))]>;
def MAD64rri : NVPTXInst<(outs Int64Regs:$dst),
                      (ins Int64Regs:$a, Int64Regs:$b, i64imm:$c),
                      "mad.lo.s64 \t$dst, $a, $b, $c;",
                      [(set Int64Regs:$dst,
                        (imad Int64Regs:$a, Int64Regs:$b, imm:$c))]>;
def MAD64rir : NVPTXInst<(outs Int64Regs:$dst),
                      (ins Int64Regs:$a, i64imm:$b, Int64Regs:$c),
                      "mad.lo.s64 \t$dst, $a, $b, $c;",
                      [(set Int64Regs:$dst,
                        (imad Int64Regs:$a, imm:$b, Int64Regs:$c))]>;
def MAD64rii : NVPTXInst<(outs Int64Regs:$dst),
                      (ins Int64Regs:$a, i64imm:$b, i64imm:$c),
                      "mad.lo.s64 \t$dst, $a, $b, $c;",
                      [(set Int64Regs:$dst,
                        (imad Int64Regs:$a, imm:$b, imm:$c))]>;

def INEG16 : NVPTXInst<(outs Int16Regs:$dst), (ins Int16Regs:$src),
                     "neg.s16 \t$dst, $src;",
         [(set Int16Regs:$dst, (ineg Int16Regs:$src))]>;
def INEG32 : NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$src),
                     "neg.s32 \t$dst, $src;",
         [(set Int32Regs:$dst, (ineg Int32Regs:$src))]>;
def INEG64 : NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$src),
                     "neg.s64 \t$dst, $src;",
         [(set Int64Regs:$dst, (ineg Int64Regs:$src))]>;

//-----------------------------------
// Floating Point Arithmetic
//-----------------------------------

// Constant 1.0f
def FloatConst1 : PatLeaf<(fpimm), [{
    if (&(N->getValueAPF().getSemantics()) != &llvm::APFloat::IEEEsingle)
      return false;
    float f = (float)N->getValueAPF().convertToFloat();
    return (f==1.0f);
}]>;
// Constand (double)1.0
def DoubleConst1 : PatLeaf<(fpimm), [{
    if (&(N->getValueAPF().getSemantics()) != &llvm::APFloat::IEEEdouble)
      return false;
    double d = (double)N->getValueAPF().convertToDouble();
    return (d==1.0);
}]>;

defm FADD : F3<"add", fadd>;
defm FSUB : F3<"sub", fsub>;
defm FMUL : F3<"mul", fmul>;

defm FADD_rn : F3_rn<"add", fadd>;
defm FSUB_rn : F3_rn<"sub", fsub>;
defm FMUL_rn : F3_rn<"mul", fmul>;

defm FABS : F2<"abs", fabs>;
defm FNEG : F2<"neg", fneg>;
defm FSQRT : F2<"sqrt.rn", fsqrt>;

//
// F64 division
//
def FDIV641r : NVPTXInst<(outs Float64Regs:$dst),
                      (ins f64imm:$a, Float64Regs:$b),
                      "rcp.rn.f64 \t$dst, $b;",
                      [(set Float64Regs:$dst,
                        (fdiv DoubleConst1:$a, Float64Regs:$b))]>;
def FDIV64rr : NVPTXInst<(outs Float64Regs:$dst),
                      (ins Float64Regs:$a, Float64Regs:$b),
                      "div.rn.f64 \t$dst, $a, $b;",
                      [(set Float64Regs:$dst,
                        (fdiv Float64Regs:$a, Float64Regs:$b))]>;
def FDIV64ri : NVPTXInst<(outs Float64Regs:$dst),
                      (ins Float64Regs:$a, f64imm:$b),
                      "div.rn.f64 \t$dst, $a, $b;",
                      [(set Float64Regs:$dst,
                        (fdiv Float64Regs:$a, fpimm:$b))]>;

//
// F32 Approximate reciprocal
//
def FDIV321r_ftz : NVPTXInst<(outs Float32Regs:$dst),
                      (ins f32imm:$a, Float32Regs:$b),
                      "rcp.approx.ftz.f32 \t$dst, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv FloatConst1:$a, Float32Regs:$b))]>,
                      Requires<[do_DIVF32_APPROX, doF32FTZ]>;
def FDIV321r : NVPTXInst<(outs Float32Regs:$dst),
                        (ins f32imm:$a, Float32Regs:$b),
                       "rcp.approx.f32 \t$dst, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv FloatConst1:$a, Float32Regs:$b))]>,
                      Requires<[do_DIVF32_APPROX]>;
//
// F32 Approximate division
//
def FDIV32approxrr_ftz : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, Float32Regs:$b),
                      "div.approx.ftz.f32 \t$dst, $a, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv Float32Regs:$a, Float32Regs:$b))]>,
                      Requires<[do_DIVF32_APPROX, doF32FTZ]>;
def FDIV32approxri_ftz : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, f32imm:$b),
                      "div.approx.ftz.f32 \t$dst, $a, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv Float32Regs:$a, fpimm:$b))]>,
                      Requires<[do_DIVF32_APPROX, doF32FTZ]>;
def FDIV32approxrr     : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, Float32Regs:$b),
                      "div.approx.f32 \t$dst, $a, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv Float32Regs:$a, Float32Regs:$b))]>,
                      Requires<[do_DIVF32_APPROX]>;
def FDIV32approxri : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, f32imm:$b),
                      "div.approx.f32 \t$dst, $a, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv Float32Regs:$a, fpimm:$b))]>,
                      Requires<[do_DIVF32_APPROX]>;
//
// F32 Semi-accurate reciprocal
//
// rcp.approx gives the same result as div.full(1.0f, a) and is faster.
//
def FDIV321r_approx_ftz : NVPTXInst<(outs Float32Regs:$dst),
                      (ins f32imm:$a, Float32Regs:$b),
                      "rcp.approx.ftz.f32 \t$dst, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv FloatConst1:$a, Float32Regs:$b))]>,
                      Requires<[do_DIVF32_FULL, doF32FTZ]>;
def FDIV321r_approx : NVPTXInst<(outs Float32Regs:$dst),
                      (ins f32imm:$a, Float32Regs:$b),
                      "rcp.approx.f32 \t$dst, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv FloatConst1:$a, Float32Regs:$b))]>,
                      Requires<[do_DIVF32_FULL]>;
//
// F32 Semi-accurate division
//
def FDIV32rr_ftz : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, Float32Regs:$b),
                      "div.full.ftz.f32 \t$dst, $a, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv Float32Regs:$a, Float32Regs:$b))]>,
                      Requires<[do_DIVF32_FULL, doF32FTZ]>;
def FDIV32ri_ftz : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, f32imm:$b),
                      "div.full.ftz.f32 \t$dst, $a, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv Float32Regs:$a, fpimm:$b))]>,
                      Requires<[do_DIVF32_FULL, doF32FTZ]>;
def FDIV32rr : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, Float32Regs:$b),
                      "div.full.f32 \t$dst, $a, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv Float32Regs:$a, Float32Regs:$b))]>,
                      Requires<[do_DIVF32_FULL]>;
def FDIV32ri : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, f32imm:$b),
                      "div.full.f32 \t$dst, $a, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv Float32Regs:$a, fpimm:$b))]>,
                      Requires<[do_DIVF32_FULL]>;
//
// F32 Accurate reciprocal
//
def FDIV321r_prec_ftz : NVPTXInst<(outs Float32Regs:$dst),
                        (ins f32imm:$a, Float32Regs:$b),
                       "rcp.rn.ftz.f32 \t$dst, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv FloatConst1:$a, Float32Regs:$b))]>,
                      Requires<[reqPTX20, doF32FTZ]>;
def FDIV321r_prec : NVPTXInst<(outs Float32Regs:$dst),
                      (ins f32imm:$a, Float32Regs:$b),
                       "rcp.rn.f32 \t$dst, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv FloatConst1:$a, Float32Regs:$b))]>,
                      Requires<[reqPTX20]>;
//
// F32 Accurate division
//
def FDIV32rr_prec_ftz : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, Float32Regs:$b),
                      "div.rn.ftz.f32 \t$dst, $a, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv Float32Regs:$a, Float32Regs:$b))]>,
                      Requires<[doF32FTZ, reqPTX20]>;
def FDIV32ri_prec_ftz : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, f32imm:$b),
                      "div.rn.ftz.f32 \t$dst, $a, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv Float32Regs:$a, fpimm:$b))]>,
                      Requires<[doF32FTZ, reqPTX20]>;
def FDIV32rr_prec : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, Float32Regs:$b),
                      "div.rn.f32 \t$dst, $a, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv Float32Regs:$a, Float32Regs:$b))]>,
                      Requires<[reqPTX20]>;
def FDIV32ri_prec : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, f32imm:$b),
                      "div.rn.f32 \t$dst, $a, $b;",
                      [(set Float32Regs:$dst,
                        (fdiv Float32Regs:$a, fpimm:$b))]>,
                      Requires<[reqPTX20]>;

//
// F32 rsqrt
//

def RSQRTF32approx1r : NVPTXInst<(outs Float32Regs:$dst), (ins Float32Regs:$b),
                       "rsqrt.approx.f32 \t$dst, $b;", []>;

def: Pat<(fdiv FloatConst1, (int_nvvm_sqrt_f Float32Regs:$b)),
         (RSQRTF32approx1r Float32Regs:$b)>,
         Requires<[do_DIVF32_FULL, do_SQRTF32_APPROX, doNoF32FTZ]>;

multiclass FPCONTRACT32<string OpcStr, Predicate Pred> {
   def rrr : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, Float32Regs:$b, Float32Regs:$c),
                      !strconcat(OpcStr, " \t$dst, $a, $b, $c;"),
                      [(set Float32Regs:$dst,
                        (fma Float32Regs:$a, Float32Regs:$b, Float32Regs:$c))]>,
                      Requires<[Pred]>;
   def rri : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, Float32Regs:$b, f32imm:$c),
                      !strconcat(OpcStr, " \t$dst, $a, $b, $c;"),
                      [(set Float32Regs:$dst,
                        (fma Float32Regs:$a, Float32Regs:$b, fpimm:$c))]>,
                      Requires<[Pred]>;
   def rir : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, f32imm:$b, Float32Regs:$c),
                      !strconcat(OpcStr, " \t$dst, $a, $b, $c;"),
                      [(set Float32Regs:$dst,
                        (fma Float32Regs:$a, fpimm:$b, Float32Regs:$c))]>,
                      Requires<[Pred]>;
   def rii : NVPTXInst<(outs Float32Regs:$dst),
                      (ins Float32Regs:$a, f32imm:$b, f32imm:$c),
                      !strconcat(OpcStr, " \t$dst, $a, $b, $c;"),
                      [(set Float32Regs:$dst,
                        (fma Float32Regs:$a, fpimm:$b, fpimm:$c))]>,
                      Requires<[Pred]>;
}

multiclass FPCONTRACT64<string OpcStr, Predicate Pred> {
   def rrr : NVPTXInst<(outs Float64Regs:$dst),
                      (ins Float64Regs:$a, Float64Regs:$b, Float64Regs:$c),
                      !strconcat(OpcStr, " \t$dst, $a, $b, $c;"),
                      [(set Float64Regs:$dst,
                        (fma Float64Regs:$a, Float64Regs:$b, Float64Regs:$c))]>,
                      Requires<[Pred]>;
   def rri : NVPTXInst<(outs Float64Regs:$dst),
                      (ins Float64Regs:$a, Float64Regs:$b, f64imm:$c),
                      !strconcat(OpcStr, " \t$dst, $a, $b, $c;"),
                      [(set Float64Regs:$dst,
                        (fma Float64Regs:$a, Float64Regs:$b, fpimm:$c))]>,
                      Requires<[Pred]>;
   def rir : NVPTXInst<(outs Float64Regs:$dst),
                      (ins Float64Regs:$a, f64imm:$b, Float64Regs:$c),
                      !strconcat(OpcStr, " \t$dst, $a, $b, $c;"),
                      [(set Float64Regs:$dst,
                        (fma Float64Regs:$a, fpimm:$b, Float64Regs:$c))]>,
                      Requires<[Pred]>;
   def rii : NVPTXInst<(outs Float64Regs:$dst),
                      (ins Float64Regs:$a, f64imm:$b, f64imm:$c),
                      !strconcat(OpcStr, " \t$dst, $a, $b, $c;"),
                      [(set Float64Regs:$dst,
                        (fma Float64Regs:$a, fpimm:$b, fpimm:$c))]>,
                      Requires<[Pred]>;
}

defm FMA32_ftz  : FPCONTRACT32<"fma.rn.ftz.f32", doF32FTZ>;
defm FMA32  : FPCONTRACT32<"fma.rn.f32", true>;
defm FMA64  : FPCONTRACT64<"fma.rn.f64", true>;

def SINF:  NVPTXInst<(outs Float32Regs:$dst), (ins Float32Regs:$src),
                      "sin.approx.f32 \t$dst, $src;",
                      [(set Float32Regs:$dst, (fsin Float32Regs:$src))]>;
def COSF:  NVPTXInst<(outs Float32Regs:$dst), (ins Float32Regs:$src),
                      "cos.approx.f32 \t$dst, $src;",
                      [(set Float32Regs:$dst, (fcos Float32Regs:$src))]>;

// Lower (frem x, y) into (sub x, (mul (floor (div x, y)) y))
// e.g. "poor man's fmod()"

// frem - f32 FTZ
def : Pat<(frem Float32Regs:$x, Float32Regs:$y),
          (FSUBf32rr_ftz Float32Regs:$x, (FMULf32rr_ftz (CVT_f32_f32
            (FDIV32rr_prec_ftz Float32Regs:$x, Float32Regs:$y), CvtRMI_FTZ),
             Float32Regs:$y))>,
          Requires<[doF32FTZ]>;
def : Pat<(frem Float32Regs:$x, fpimm:$y),
          (FSUBf32rr_ftz Float32Regs:$x, (FMULf32ri_ftz (CVT_f32_f32
            (FDIV32ri_prec_ftz Float32Regs:$x, fpimm:$y), CvtRMI_FTZ),
             fpimm:$y))>,
          Requires<[doF32FTZ]>;

// frem - f32
def : Pat<(frem Float32Regs:$x, Float32Regs:$y),
          (FSUBf32rr Float32Regs:$x, (FMULf32rr (CVT_f32_f32
            (FDIV32rr_prec Float32Regs:$x, Float32Regs:$y), CvtRMI),
             Float32Regs:$y))>;
def : Pat<(frem Float32Regs:$x, fpimm:$y),
          (FSUBf32rr Float32Regs:$x, (FMULf32ri (CVT_f32_f32
            (FDIV32ri_prec Float32Regs:$x, fpimm:$y), CvtRMI),
             fpimm:$y))>;

// frem - f64
def : Pat<(frem Float64Regs:$x, Float64Regs:$y),
          (FSUBf64rr Float64Regs:$x, (FMULf64rr (CVT_f64_f64
            (FDIV64rr Float64Regs:$x, Float64Regs:$y), CvtRMI),
             Float64Regs:$y))>;
def : Pat<(frem Float64Regs:$x, fpimm:$y),
          (FSUBf64rr Float64Regs:$x, (FMULf64ri (CVT_f64_f64
            (FDIV64ri Float64Regs:$x, fpimm:$y), CvtRMI),
             fpimm:$y))>;

//-----------------------------------
// Logical Arithmetic
//-----------------------------------

multiclass LOG_FORMAT<string OpcStr, SDNode OpNode> {
  def b1rr:  NVPTXInst<(outs Int1Regs:$dst), (ins Int1Regs:$a, Int1Regs:$b),
                      !strconcat(OpcStr, ".pred  \t$dst, $a, $b;"),
                      [(set Int1Regs:$dst, (OpNode Int1Regs:$a, Int1Regs:$b))]>;
  def b1ri:  NVPTXInst<(outs Int1Regs:$dst), (ins Int1Regs:$a, i1imm:$b),
                      !strconcat(OpcStr, ".pred  \t$dst, $a, $b;"),
                      [(set Int1Regs:$dst, (OpNode Int1Regs:$a, imm:$b))]>;
  def b16rr:  NVPTXInst<(outs Int16Regs:$dst), (ins Int16Regs:$a, Int16Regs:$b),
                      !strconcat(OpcStr, ".b16  \t$dst, $a, $b;"),
                      [(set Int16Regs:$dst, (OpNode Int16Regs:$a,
                        Int16Regs:$b))]>;
  def b16ri:  NVPTXInst<(outs Int16Regs:$dst), (ins Int16Regs:$a, i16imm:$b),
                      !strconcat(OpcStr, ".b16  \t$dst, $a, $b;"),
                      [(set Int16Regs:$dst, (OpNode Int16Regs:$a, imm:$b))]>;
  def b32rr:  NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$a, Int32Regs:$b),
                      !strconcat(OpcStr, ".b32  \t$dst, $a, $b;"),
                      [(set Int32Regs:$dst, (OpNode Int32Regs:$a,
                        Int32Regs:$b))]>;
  def b32ri:  NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$a, i32imm:$b),
                      !strconcat(OpcStr, ".b32  \t$dst, $a, $b;"),
                      [(set Int32Regs:$dst, (OpNode Int32Regs:$a, imm:$b))]>;
  def b64rr:  NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$a, Int64Regs:$b),
                      !strconcat(OpcStr, ".b64  \t$dst, $a, $b;"),
                      [(set Int64Regs:$dst, (OpNode Int64Regs:$a,
                        Int64Regs:$b))]>;
  def b64ri:  NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$a, i64imm:$b),
                      !strconcat(OpcStr, ".b64  \t$dst, $a, $b;"),
                      [(set Int64Regs:$dst, (OpNode Int64Regs:$a, imm:$b))]>;
}

defm OR  : LOG_FORMAT<"or", or>;
defm AND : LOG_FORMAT<"and", and>;
defm XOR : LOG_FORMAT<"xor", xor>;

def NOT1:  NVPTXInst<(outs Int1Regs:$dst), (ins Int1Regs:$src),
                      "not.pred \t$dst, $src;",
                      [(set Int1Regs:$dst, (not Int1Regs:$src))]>;
def NOT16:  NVPTXInst<(outs Int16Regs:$dst), (ins Int16Regs:$src),
                      "not.b16 \t$dst, $src;",
                      [(set Int16Regs:$dst, (not Int16Regs:$src))]>;
def NOT32:  NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$src),
                      "not.b32 \t$dst, $src;",
                      [(set Int32Regs:$dst, (not Int32Regs:$src))]>;
def NOT64:  NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$src),
                      "not.b64 \t$dst, $src;",
                      [(set Int64Regs:$dst, (not Int64Regs:$src))]>;

// For shifts, the second src operand must be 32-bit value
multiclass LSHIFT_FORMAT<string OpcStr, SDNode OpNode> {
   def i64rr : NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$a,
                      Int32Regs:$b),
                      !strconcat(OpcStr, "64 \t$dst, $a, $b;"),
                      [(set Int64Regs:$dst, (OpNode Int64Regs:$a,
                        Int32Regs:$b))]>;
   def i64ri : NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$a, i32imm:$b),
                      !strconcat(OpcStr, "64 \t$dst, $a, $b;"),
                      [(set Int64Regs:$dst, (OpNode Int64Regs:$a,
                        (i32 imm:$b)))]>;
   def i32rr : NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$a,
                      Int32Regs:$b),
                      !strconcat(OpcStr, "32 \t$dst, $a, $b;"),
                      [(set Int32Regs:$dst, (OpNode Int32Regs:$a,
                        Int32Regs:$b))]>;
   def i32ri : NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$a, i32imm:$b),
                      !strconcat(OpcStr, "32 \t$dst, $a, $b;"),
                      [(set Int32Regs:$dst, (OpNode Int32Regs:$a,
                        (i32 imm:$b)))]>;
   def i32ii : NVPTXInst<(outs Int32Regs:$dst), (ins i32imm:$a, i32imm:$b),
                      !strconcat(OpcStr, "32 \t$dst, $a, $b;"),
                      [(set Int32Regs:$dst, (OpNode (i32 imm:$a),
                        (i32 imm:$b)))]>;
   def i16rr : NVPTXInst<(outs Int16Regs:$dst), (ins Int16Regs:$a,
                      Int32Regs:$b),
                      !strconcat(OpcStr, "16 \t$dst, $a, $b;"),
                      [(set Int16Regs:$dst, (OpNode Int16Regs:$a,
                        Int32Regs:$b))]>;
   def i16ri : NVPTXInst<(outs Int16Regs:$dst), (ins Int16Regs:$a, i32imm:$b),
                      !strconcat(OpcStr, "16 \t$dst, $a, $b;"),
                      [(set Int16Regs:$dst, (OpNode Int16Regs:$a,
                        (i32 imm:$b)))]>;
}

defm SHL : LSHIFT_FORMAT<"shl.b", shl>;

// For shifts, the second src operand must be 32-bit value
// Need to add cvt for the 8-bits.
multiclass RSHIFT_FORMAT<string OpcStr, SDNode OpNode> {
   def i64rr : NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$a,
                      Int32Regs:$b),
                      !strconcat(OpcStr, "64 \t$dst, $a, $b;"),
                      [(set Int64Regs:$dst, (OpNode Int64Regs:$a,
                        Int32Regs:$b))]>;
   def i64ri : NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$a, i32imm:$b),
                      !strconcat(OpcStr, "64 \t$dst, $a, $b;"),
                      [(set Int64Regs:$dst, (OpNode Int64Regs:$a,
                        (i32 imm:$b)))]>;
   def i32rr : NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$a,
                      Int32Regs:$b),
                      !strconcat(OpcStr, "32 \t$dst, $a, $b;"),
                      [(set Int32Regs:$dst, (OpNode Int32Regs:$a,
                        Int32Regs:$b))]>;
   def i32ri : NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$a, i32imm:$b),
                      !strconcat(OpcStr, "32 \t$dst, $a, $b;"),
                      [(set Int32Regs:$dst, (OpNode Int32Regs:$a,
                        (i32 imm:$b)))]>;
   def i32ii : NVPTXInst<(outs Int32Regs:$dst), (ins i32imm:$a, i32imm:$b),
                      !strconcat(OpcStr, "32 \t$dst, $a, $b;"),
                      [(set Int32Regs:$dst, (OpNode (i32 imm:$a),
                        (i32 imm:$b)))]>;
   def i16rr : NVPTXInst<(outs Int16Regs:$dst), (ins Int16Regs:$a,
                      Int32Regs:$b),
                      !strconcat(OpcStr, "16 \t$dst, $a, $b;"),
                      [(set Int16Regs:$dst, (OpNode Int16Regs:$a,
                        Int32Regs:$b))]>;
   def i16ri : NVPTXInst<(outs Int16Regs:$dst), (ins Int16Regs:$a, i32imm:$b),
                      !strconcat(OpcStr, "16 \t$dst, $a, $b;"),
                      [(set Int16Regs:$dst, (OpNode Int16Regs:$a,
                        (i32 imm:$b)))]>;
}

defm SRA : RSHIFT_FORMAT<"shr.s", sra>;
defm SRL : RSHIFT_FORMAT<"shr.u", srl>;

//
// Rotate: use ptx shf instruction if available.
//

// 32 bit r2 = rotl r1, n
//    =>
//        r2 = shf.l r1, r1, n
def ROTL32imm_hw : NVPTXInst<(outs Int32Regs:$dst),
                             (ins Int32Regs:$src, i32imm:$amt),
              "shf.l.wrap.b32 \t$dst, $src, $src, $amt;",
    [(set Int32Regs:$dst, (rotl Int32Regs:$src, (i32 imm:$amt)))]>,
    Requires<[hasHWROT32]> ;

def ROTL32reg_hw : NVPTXInst<(outs Int32Regs:$dst),
                             (ins Int32Regs:$src, Int32Regs:$amt),
              "shf.l.wrap.b32 \t$dst, $src, $src, $amt;",
    [(set Int32Regs:$dst, (rotl Int32Regs:$src, Int32Regs:$amt))]>,
    Requires<[hasHWROT32]>;

// 32 bit r2 = rotr r1, n
//    =>
//        r2 = shf.r r1, r1, n
def ROTR32imm_hw : NVPTXInst<(outs Int32Regs:$dst),
                             (ins Int32Regs:$src, i32imm:$amt),
              "shf.r.wrap.b32 \t$dst, $src, $src, $amt;",
    [(set Int32Regs:$dst, (rotr Int32Regs:$src, (i32 imm:$amt)))]>,
    Requires<[hasHWROT32]>;

def ROTR32reg_hw : NVPTXInst<(outs Int32Regs:$dst),
                             (ins Int32Regs:$src, Int32Regs:$amt),
              "shf.r.wrap.b32 \t$dst, $src, $src, $amt;",
    [(set Int32Regs:$dst, (rotr Int32Regs:$src, Int32Regs:$amt))]>,
    Requires<[hasHWROT32]>;

//
// Rotate: if ptx shf instruction is not available, then use shift+add
//
// 32bit
def ROT32imm_sw : NVPTXInst<(outs Int32Regs:$dst),
  (ins Int32Regs:$src, i32imm:$amt1, i32imm:$amt2),
    !strconcat("{{\n\t",
    !strconcat(".reg .b32 %lhs;\n\t",
    !strconcat(".reg .b32 %rhs;\n\t",
    !strconcat("shl.b32 \t%lhs, $src, $amt1;\n\t",
    !strconcat("shr.b32 \t%rhs, $src, $amt2;\n\t",
    !strconcat("add.u32 \t$dst, %lhs, %rhs;\n\t",
    !strconcat("}}", ""))))))),
    []>;

def SUB_FRM_32 : SDNodeXForm<imm, [{
    return CurDAG->getTargetConstant(32-N->getZExtValue(), MVT::i32);
}]>;

def : Pat<(rotl Int32Regs:$src, (i32 imm:$amt)),
          (ROT32imm_sw Int32Regs:$src, imm:$amt, (SUB_FRM_32 node:$amt))>,
      Requires<[noHWROT32]>;
def : Pat<(rotr Int32Regs:$src, (i32 imm:$amt)),
          (ROT32imm_sw Int32Regs:$src, (SUB_FRM_32 node:$amt), imm:$amt)>,
      Requires<[noHWROT32]>;

def ROTL32reg_sw : NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$src,
    Int32Regs:$amt),
    !strconcat("{{\n\t",
    !strconcat(".reg .b32 %lhs;\n\t",
    !strconcat(".reg .b32 %rhs;\n\t",
    !strconcat(".reg .b32 %amt2;\n\t",
    !strconcat("shl.b32 \t%lhs, $src, $amt;\n\t",
    !strconcat("sub.s32 \t%amt2, 32, $amt;\n\t",
    !strconcat("shr.b32 \t%rhs, $src, %amt2;\n\t",
    !strconcat("add.u32 \t$dst, %lhs, %rhs;\n\t",
    !strconcat("}}", ""))))))))),
    [(set Int32Regs:$dst, (rotl Int32Regs:$src, Int32Regs:$amt))]>,
    Requires<[noHWROT32]>;

def ROTR32reg_sw : NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$src,
    Int32Regs:$amt),
    !strconcat("{{\n\t",
    !strconcat(".reg .b32 %lhs;\n\t",
    !strconcat(".reg .b32 %rhs;\n\t",
    !strconcat(".reg .b32 %amt2;\n\t",
    !strconcat("shr.b32 \t%lhs, $src, $amt;\n\t",
    !strconcat("sub.s32 \t%amt2, 32, $amt;\n\t",
    !strconcat("shl.b32 \t%rhs, $src, %amt2;\n\t",
    !strconcat("add.u32 \t$dst, %lhs, %rhs;\n\t",
    !strconcat("}}", ""))))))))),
    [(set Int32Regs:$dst, (rotr Int32Regs:$src, Int32Regs:$amt))]>,
    Requires<[noHWROT32]>;

// 64bit
def ROT64imm_sw : NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$src,
    i32imm:$amt1, i32imm:$amt2),
    !strconcat("{{\n\t",
    !strconcat(".reg .b64 %lhs;\n\t",
    !strconcat(".reg .b64 %rhs;\n\t",
    !strconcat("shl.b64 \t%lhs, $src, $amt1;\n\t",
    !strconcat("shr.b64 \t%rhs, $src, $amt2;\n\t",
    !strconcat("add.u64 \t$dst, %lhs, %rhs;\n\t",
    !strconcat("}}", ""))))))),
    []>;

def SUB_FRM_64 : SDNodeXForm<imm, [{
    return CurDAG->getTargetConstant(64-N->getZExtValue(), MVT::i32);
}]>;

def : Pat<(rotl Int64Regs:$src, (i32 imm:$amt)),
          (ROT64imm_sw Int64Regs:$src, imm:$amt, (SUB_FRM_64 node:$amt))>;
def : Pat<(rotr Int64Regs:$src, (i32 imm:$amt)),
          (ROT64imm_sw Int64Regs:$src, (SUB_FRM_64 node:$amt), imm:$amt)>;

def ROTL64reg_sw : NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$src,
    Int32Regs:$amt),
    !strconcat("{{\n\t",
    !strconcat(".reg .b64 %lhs;\n\t",
    !strconcat(".reg .b64 %rhs;\n\t",
    !strconcat(".reg .u32 %amt2;\n\t",
    !strconcat("shl.b64 \t%lhs, $src, $amt;\n\t",
    !strconcat("sub.u32 \t%amt2, 64, $amt;\n\t",
    !strconcat("shr.b64 \t%rhs, $src, %amt2;\n\t",
    !strconcat("add.u64 \t$dst, %lhs, %rhs;\n\t",
    !strconcat("}}", ""))))))))),
    [(set Int64Regs:$dst, (rotl Int64Regs:$src, Int32Regs:$amt))]>;

def ROTR64reg_sw : NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$src,
    Int32Regs:$amt),
    !strconcat("{{\n\t",
    !strconcat(".reg .b64 %lhs;\n\t",
    !strconcat(".reg .b64 %rhs;\n\t",
    !strconcat(".reg .u32 %amt2;\n\t",
    !strconcat("shr.b64 \t%lhs, $src, $amt;\n\t",
    !strconcat("sub.u32 \t%amt2, 64, $amt;\n\t",
    !strconcat("shl.b64 \t%rhs, $src, %amt2;\n\t",
    !strconcat("add.u64 \t$dst, %lhs, %rhs;\n\t",
    !strconcat("}}", ""))))))))),
    [(set Int64Regs:$dst, (rotr Int64Regs:$src, Int32Regs:$amt))]>;

// BFE - bit-field extract

multiclass BFE<string TyStr, RegisterClass RC> {
  // BFE supports both 32-bit and 64-bit values, but the start and length
  // operands are always 32-bit
  def rrr
    : NVPTXInst<(outs RC:$d),
                (ins RC:$a, Int32Regs:$b, Int32Regs:$c),
                !strconcat("bfe.", TyStr, " \t$d, $a, $b, $c;"), []>;
  def rri
    : NVPTXInst<(outs RC:$d),
                (ins RC:$a, Int32Regs:$b, i32imm:$c),
                !strconcat("bfe.", TyStr, " \t$d, $a, $b, $c;"), []>;
  def rii
    : NVPTXInst<(outs RC:$d),
                (ins RC:$a, i32imm:$b, i32imm:$c),
                !strconcat("bfe.", TyStr, " \t$d, $a, $b, $c;"), []>;
}

defm BFE_S32 : BFE<"s32", Int32Regs>;
defm BFE_U32 : BFE<"u32", Int32Regs>;
defm BFE_S64 : BFE<"s64", Int64Regs>;
defm BFE_U64 : BFE<"u64", Int64Regs>;

//-----------------------------------
// General Comparison
//-----------------------------------

// General setp instructions
multiclass SETP<string TypeStr, RegisterClass RC, Operand ImmCls> {
  def rr : NVPTXInst<(outs Int1Regs:$dst),
                     (ins RC:$a, RC:$b, CmpMode:$cmp),
            !strconcat("setp${cmp:base}${cmp:ftz}.", TypeStr, "\t$dst, $a, $b;"),
                     []>;
  def ri : NVPTXInst<(outs Int1Regs:$dst),
                     (ins RC:$a, ImmCls:$b, CmpMode:$cmp),
            !strconcat("setp${cmp:base}${cmp:ftz}.", TypeStr, "\t$dst, $a, $b;"),
                     []>;
  def ir : NVPTXInst<(outs Int1Regs:$dst),
                     (ins ImmCls:$a, RC:$b, CmpMode:$cmp),
            !strconcat("setp${cmp:base}${cmp:ftz}.", TypeStr, "\t$dst, $a, $b;"),
                     []>;
}

defm SETP_b16 : SETP<"b16", Int16Regs, i16imm>;
defm SETP_s16 : SETP<"s16", Int16Regs, i16imm>;
defm SETP_u16 : SETP<"u16", Int16Regs, i16imm>;
defm SETP_b32 : SETP<"b32", Int32Regs, i32imm>;
defm SETP_s32 : SETP<"s32", Int32Regs, i32imm>;
defm SETP_u32 : SETP<"u32", Int32Regs, i32imm>;
defm SETP_b64 : SETP<"b64", Int64Regs, i64imm>;
defm SETP_s64 : SETP<"s64", Int64Regs, i64imm>;
defm SETP_u64 : SETP<"u64", Int64Regs, i64imm>;
defm SETP_f32 : SETP<"f32", Float32Regs, f32imm>;
defm SETP_f64 : SETP<"f64", Float64Regs, f64imm>;

// General set instructions
multiclass SET<string TypeStr, RegisterClass RC, Operand ImmCls> {
  def rr : NVPTXInst<(outs Int32Regs:$dst),
                     (ins RC:$a, RC:$b, CmpMode:$cmp),
                     !strconcat("set$cmp.", TypeStr, "\t$dst, $a, $b;"), []>;
  def ri : NVPTXInst<(outs Int32Regs:$dst),
                     (ins RC:$a, ImmCls:$b, CmpMode:$cmp),
                     !strconcat("set$cmp.", TypeStr, "\t$dst, $a, $b;"), []>;
  def ir : NVPTXInst<(outs Int32Regs:$dst),
                     (ins ImmCls:$a, RC:$b, CmpMode:$cmp),
                     !strconcat("set$cmp.", TypeStr, "\t$dst, $a, $b;"), []>;
}

defm SET_b16 : SET<"b16", Int16Regs, i16imm>;
defm SET_s16 : SET<"s16", Int16Regs, i16imm>;
defm SET_u16 : SET<"u16", Int16Regs, i16imm>;
defm SET_b32 : SET<"b32", Int32Regs, i32imm>;
defm SET_s32 : SET<"s32", Int32Regs, i32imm>;
defm SET_u32 : SET<"u32", Int32Regs, i32imm>;
defm SET_b64 : SET<"b64", Int64Regs, i64imm>;
defm SET_s64 : SET<"s64", Int64Regs, i64imm>;
defm SET_u64 : SET<"u64", Int64Regs, i64imm>;
defm SET_f32 : SET<"f32", Float32Regs, f32imm>;
defm SET_f64 : SET<"f64", Float64Regs, f64imm>;

//-----------------------------------
// General Selection
//-----------------------------------

// General selp instructions
multiclass SELP<string TypeStr, RegisterClass RC, Operand ImmCls> {
  def rr : NVPTXInst<(outs RC:$dst),
                     (ins RC:$a, RC:$b, Int1Regs:$p),
                     !strconcat("selp.", TypeStr, "\t$dst, $a, $b, $p;"), []>;
  def ri : NVPTXInst<(outs RC:$dst),
                     (ins RC:$a, ImmCls:$b, Int1Regs:$p),
                     !strconcat("selp.", TypeStr, "\t$dst, $a, $b, $p;"), []>;
  def ir : NVPTXInst<(outs RC:$dst),
                     (ins ImmCls:$a, RC:$b, Int1Regs:$p),
                     !strconcat("selp.", TypeStr, "\t$dst, $a, $b, $p;"), []>;
  def ii : NVPTXInst<(outs RC:$dst),
                     (ins ImmCls:$a, ImmCls:$b, Int1Regs:$p),
                     !strconcat("selp.", TypeStr, "\t$dst, $a, $b, $p;"), []>;
}

multiclass SELP_PATTERN<string TypeStr, RegisterClass RC, Operand ImmCls,
                        SDNode ImmNode> {
  def rr : NVPTXInst<(outs RC:$dst),
                     (ins RC:$a, RC:$b, Int1Regs:$p),
                     !strconcat("selp.", TypeStr, "\t$dst, $a, $b, $p;"),
                     [(set RC:$dst, (select Int1Regs:$p, RC:$a, RC:$b))]>;
  def ri : NVPTXInst<(outs RC:$dst),
                     (ins RC:$a, ImmCls:$b, Int1Regs:$p),
                     !strconcat("selp.", TypeStr, "\t$dst, $a, $b, $p;"),
                     [(set RC:$dst, (select Int1Regs:$p, RC:$a, ImmNode:$b))]>;
  def ir : NVPTXInst<(outs RC:$dst),
                     (ins ImmCls:$a, RC:$b, Int1Regs:$p),
                     !strconcat("selp.", TypeStr, "\t$dst, $a, $b, $p;"),
                     [(set RC:$dst, (select Int1Regs:$p, ImmNode:$a, RC:$b))]>;
  def ii : NVPTXInst<(outs RC:$dst),
                     (ins ImmCls:$a, ImmCls:$b, Int1Regs:$p),
                     !strconcat("selp.", TypeStr, "\t$dst, $a, $b, $p;"),
                 [(set RC:$dst, (select Int1Regs:$p, ImmNode:$a, ImmNode:$b))]>;
}

defm SELP_b16 : SELP_PATTERN<"b16", Int16Regs, i16imm, imm>;
defm SELP_s16 : SELP<"s16", Int16Regs, i16imm>;
defm SELP_u16 : SELP<"u16", Int16Regs, i16imm>;
defm SELP_b32 : SELP_PATTERN<"b32", Int32Regs, i32imm, imm>;
defm SELP_s32 : SELP<"s32", Int32Regs, i32imm>;
defm SELP_u32 : SELP<"u32", Int32Regs, i32imm>;
defm SELP_b64 : SELP_PATTERN<"b64", Int64Regs, i64imm, imm>;
defm SELP_s64 : SELP<"s64", Int64Regs, i64imm>;
defm SELP_u64 : SELP<"u64", Int64Regs, i64imm>;
defm SELP_f32 : SELP_PATTERN<"f32", Float32Regs, f32imm, fpimm>;
defm SELP_f64 : SELP_PATTERN<"f64", Float64Regs, f64imm, fpimm>;

// Special select for predicate operands
def : Pat<(i1 (select Int1Regs:$p, Int1Regs:$a, Int1Regs:$b)),
              (ORb1rr (ANDb1rr Int1Regs:$p, Int1Regs:$a),
              (ANDb1rr (NOT1 Int1Regs:$p), Int1Regs:$b))>;

//
// Funnnel shift in clamp mode
//
// - SDNodes are created so they can be used in the DAG code,
//   e.g. NVPTXISelLowering (LowerShiftLeftParts and LowerShiftRightParts)
//
def SDTIntShiftDOp: SDTypeProfile<1, 3,
                                  [SDTCisSameAs<0, 1>, SDTCisSameAs<0, 2>,
                                   SDTCisInt<0>, SDTCisInt<3>]>;
def FUN_SHFL_CLAMP : SDNode<"NVPTXISD::FUN_SHFL_CLAMP", SDTIntShiftDOp, []>;
def FUN_SHFR_CLAMP : SDNode<"NVPTXISD::FUN_SHFR_CLAMP", SDTIntShiftDOp, []>;

def FUNSHFLCLAMP : NVPTXInst<(outs Int32Regs:$dst),
                             (ins Int32Regs:$lo, Int32Regs:$hi, Int32Regs:$amt),
                  "shf.l.clamp.b32 \t$dst, $lo, $hi, $amt;",
                  [(set Int32Regs:$dst,
                     (FUN_SHFL_CLAMP Int32Regs:$lo,
                        Int32Regs:$hi, Int32Regs:$amt))]>;

def FUNSHFRCLAMP : NVPTXInst<(outs Int32Regs:$dst),
                             (ins Int32Regs:$lo, Int32Regs:$hi, Int32Regs:$amt),
                  "shf.r.clamp.b32 \t$dst, $lo, $hi, $amt;",
                  [(set Int32Regs:$dst,
                     (FUN_SHFR_CLAMP Int32Regs:$lo,
                        Int32Regs:$hi, Int32Regs:$amt))]>;

//-----------------------------------
// Data Movement (Load / Store, Move)
//-----------------------------------

def ADDRri : ComplexPattern<i32, 2, "SelectADDRri", [frameindex],
  [SDNPWantRoot]>;
def ADDRri64 : ComplexPattern<i64, 2, "SelectADDRri64", [frameindex],
  [SDNPWantRoot]>;

def MEMri : Operand<i32> {
  let PrintMethod = "printMemOperand";
  let MIOperandInfo = (ops Int32Regs, i32imm);
}
def MEMri64 : Operand<i64> {
  let PrintMethod = "printMemOperand";
  let MIOperandInfo = (ops Int64Regs, i64imm);
}

def imem : Operand<iPTR> {
    let PrintMethod = "printOperand";
}

def imemAny : Operand<iPTRAny> {
    let PrintMethod = "printOperand";
}

def LdStCode : Operand<i32> {
    let PrintMethod = "printLdStCode";
}

def SDTWrapper : SDTypeProfile<1, 1, [SDTCisSameAs<0, 1>, SDTCisPtrTy<0>]>;
def Wrapper    : SDNode<"NVPTXISD::Wrapper", SDTWrapper>;

def MOV_ADDR : NVPTXInst<(outs Int32Regs:$dst), (ins imem:$a),
                     "mov.u32 \t$dst, $a;",
                     [(set Int32Regs:$dst, (Wrapper tglobaladdr:$a))]>;

def MOV_ADDR64 : NVPTXInst<(outs Int64Regs:$dst), (ins imem:$a),
                     "mov.u64 \t$dst, $a;",
                     [(set Int64Regs:$dst, (Wrapper tglobaladdr:$a))]>;

// Get pointer to local stack
def MOV_DEPOT_ADDR
  : NVPTXInst<(outs Int32Regs:$d), (ins i32imm:$num),
              "mov.u32 \t$d, __local_depot$num;", []>;
def MOV_DEPOT_ADDR_64
  : NVPTXInst<(outs Int64Regs:$d), (ins i32imm:$num),
              "mov.u64 \t$d, __local_depot$num;", []>;


// copyPhysreg is hard-coded in NVPTXInstrInfo.cpp
let IsSimpleMove=1 in {
def IMOV1rr: NVPTXInst<(outs Int1Regs:$dst), (ins Int1Regs:$sss),
                   "mov.pred \t$dst, $sss;", []>;
def IMOV16rr: NVPTXInst<(outs Int16Regs:$dst), (ins Int16Regs:$sss),
                    "mov.u16 \t$dst, $sss;", []>;
def IMOV32rr: NVPTXInst<(outs Int32Regs:$dst), (ins Int32Regs:$sss),
                    "mov.u32 \t$dst, $sss;", []>;
def IMOV64rr: NVPTXInst<(outs Int64Regs:$dst), (ins Int64Regs:$sss),
                    "mov.u64 \t$dst, $sss;", []>;

def FMOV32rr: NVPTXInst<(outs Float32Regs:$dst), (ins Float32Regs:$src),
                    "mov.f32 \t$dst, $src;", []>;
def FMOV64rr: NVPTXInst<(outs Float64Regs:$dst), (ins Float64Regs:$src),
                    "mov.f64 \t$dst, $src;", []>;
}
def IMOV1ri: NVPTXInst<(outs Int1Regs:$dst), (ins i1imm:$src),
                    "mov.pred \t$dst, $src;",
          [(set Int1Regs:$dst, imm:$src)]>;
def IMOV16ri: NVPTXInst<(outs Int16Regs:$dst), (ins i16imm:$src),
                    "mov.u16 \t$dst, $src;",
          [(set Int16Regs:$dst, imm:$src)]>;
def IMOV32ri: NVPTXInst<(outs Int32Regs:$dst), (ins i32imm:$src),
                    "mov.u32 \t$dst, $src;",
          [(set Int32Regs:$dst, imm:$src)]>;
def IMOV64i: NVPTXInst<(outs Int64Regs:$dst), (ins i64imm:$src),
                    "mov.u64 \t$dst, $src;",
          [(set Int64Regs:$dst, imm:$src)]>;

def FMOV32ri: NVPTXInst<(outs Float32Regs:$dst), (ins f32imm:$src),
                    "mov.f32 \t$dst, $src;",
          [(set Float32Regs:$dst, fpimm:$src)]>;
def FMOV64ri: NVPTXInst<(outs Float64Regs:$dst), (ins f64imm:$src),
                    "mov.f64 \t$dst, $src;",
          [(set Float64Regs:$dst, fpimm:$src)]>;

def : Pat<(i32 (Wrapper texternalsym:$dst)), (IMOV32ri texternalsym:$dst)>;

//---- Copy Frame Index ----
def LEA_ADDRi : NVPTXInst<(outs Int32Regs:$dst), (ins MEMri:$addr),
                        "add.u32 \t$dst, ${addr:add};",
                        [(set Int32Regs:$dst, ADDRri:$addr)]>;
def LEA_ADDRi64 : NVPTXInst<(outs Int64Regs:$dst), (ins MEMri64:$addr),
                        "add.u64 \t$dst, ${addr:add};",
                        [(set Int64Regs:$dst, ADDRri64:$addr)]>;

//-----------------------------------
// Comparison and Selection
//-----------------------------------

multiclass ISET_FORMAT<PatFrag OpNode, PatLeaf Mode,
                       Instruction setp_16rr,
                       Instruction setp_16ri,
                       Instruction setp_16ir,
                       Instruction setp_32rr,
                       Instruction setp_32ri,
                       Instruction setp_32ir,
                       Instruction setp_64rr,
                       Instruction setp_64ri,
                       Instruction setp_64ir,
                       Instruction set_16rr,
                       Instruction set_16ri,
                       Instruction set_16ir,
                       Instruction set_32rr,
                       Instruction set_32ri,
                       Instruction set_32ir,
                       Instruction set_64rr,
                       Instruction set_64ri,
                       Instruction set_64ir> {
  // i16 -> pred
  def : Pat<(i1 (OpNode Int16Regs:$a, Int16Regs:$b)),
            (setp_16rr Int16Regs:$a, Int16Regs:$b, Mode)>;
  def : Pat<(i1 (OpNode Int16Regs:$a, imm:$b)),
            (setp_16ri Int16Regs:$a, imm:$b, Mode)>;
  def : Pat<(i1 (OpNode imm:$a, Int16Regs:$b)),
            (setp_16ir imm:$a, Int16Regs:$b, Mode)>;
  // i32 -> pred
  def : Pat<(i1 (OpNode Int32Regs:$a, Int32Regs:$b)),
            (setp_32rr Int32Regs:$a, Int32Regs:$b, Mode)>;
  def : Pat<(i1 (OpNode Int32Regs:$a, imm:$b)),
            (setp_32ri Int32Regs:$a, imm:$b, Mode)>;
  def : Pat<(i1 (OpNode imm:$a, Int32Regs:$b)),
            (setp_32ir imm:$a, Int32Regs:$b, Mode)>;
  // i64 -> pred
  def : Pat<(i1 (OpNode Int64Regs:$a, Int64Regs:$b)),
            (setp_64rr Int64Regs:$a, Int64Regs:$b, Mode)>;
  def : Pat<(i1 (OpNode Int64Regs:$a, imm:$b)),
            (setp_64ri Int64Regs:$a, imm:$b, Mode)>;
  def : Pat<(i1 (OpNode imm:$a, Int64Regs:$b)),
            (setp_64ir imm:$a, Int64Regs:$b, Mode)>;

  // i16 -> i32
  def : Pat<(i32 (OpNode Int16Regs:$a, Int16Regs:$b)),
            (set_16rr Int16Regs:$a, Int16Regs:$b, Mode)>;
  def : Pat<(i32 (OpNode Int16Regs:$a, imm:$b)),
            (set_16ri Int16Regs:$a, imm:$b, Mode)>;
  def : Pat<(i32 (OpNode imm:$a, Int16Regs:$b)),
            (set_16ir imm:$a, Int16Regs:$b, Mode)>;
  // i32 -> i32
  def : Pat<(i32 (OpNode Int32Regs:$a, Int32Regs:$b)),
            (set_32rr Int32Regs:$a, Int32Regs:$b, Mode)>;
  def : Pat<(i32 (OpNode Int32Regs:$a, imm:$b)),
            (set_32ri Int32Regs:$a, imm:$b, Mode)>;
  def : Pat<(i32 (OpNode imm:$a, Int32Regs:$b)),
            (set_32ir imm:$a, Int32Regs:$b, Mode)>;
  // i64 -> i32
  def : Pat<(i32 (OpNode Int64Regs:$a, Int64Regs:$b)),
            (set_64rr Int64Regs:$a, Int64Regs:$b, Mode)>;
  def : Pat<(i32 (OpNode Int64Regs:$a, imm:$b)),
            (set_64ri Int64Regs:$a, imm:$b, Mode)>;
  def : Pat<(i32 (OpNode imm:$a, Int64Regs:$b)),
            (set_64ir imm:$a, Int64Regs:$b, Mode)>;
}

multiclass ISET_FORMAT_SIGNED<PatFrag OpNode, PatLeaf Mode>
  : ISET_FORMAT<OpNode, Mode,
                SETP_s16rr, SETP_s16ri, SETP_s16ir,
                SETP_s32rr, SETP_s32ri, SETP_s32ir,
                SETP_s64rr, SETP_s64ri, SETP_s64ir,
                SET_s16rr, SET_s16ri, SET_s16ir,
                SET_s32rr, SET_s32ri, SET_s32ir,
                SET_s64rr, SET_s64ri, SET_s64ir> {
  // TableGen doesn't like empty multiclasses
  def : PatLeaf<(i32 0)>;
}

multiclass ISET_FORMAT_UNSIGNED<PatFrag OpNode, PatLeaf Mode>
  : ISET_FORMAT<OpNode, Mode,
                SETP_u16rr, SETP_u16ri, SETP_u16ir,
                SETP_u32rr, SETP_u32ri, SETP_u32ir,
                SETP_u64rr, SETP_u64ri, SETP_u64ir,
                SET_u16rr, SET_u16ri, SET_u16ir,
                SET_u32rr, SET_u32ri, SET_u32ir,
                SET_u64rr, SET_u64ri, SET_u64ir> {
  // TableGen doesn't like empty multiclasses
  def : PatLeaf<(i32 0)>;
}

defm : ISET_FORMAT_SIGNED<setgt, CmpGT>;
defm : ISET_FORMAT_UNSIGNED<setugt, CmpGT>;
defm : ISET_FORMAT_SIGNED<setlt, CmpLT>;
defm : ISET_FORMAT_UNSIGNED<setult, CmpLT>;
defm : ISET_FORMAT_SIGNED<setge, CmpGE>;
defm : ISET_FORMAT_UNSIGNED<setuge, CmpGE>;
defm : ISET_FORMAT_SIGNED<setle, CmpLE>;
defm : ISET_FORMAT_UNSIGNED<setule, CmpLE>;
defm : ISET_FORMAT_SIGNED<seteq, CmpEQ>;
defm : ISET_FORMAT_UNSIGNED<setueq, CmpEQ>;
defm : ISET_FORMAT_SIGNED<setne, CmpNE>;
defm : ISET_FORMAT_UNSIGNED<setune, CmpNE>;

// i1 compares
def : Pat<(setne Int1Regs:$a, Int1Regs:$b),
          (XORb1rr Int1Regs:$a, Int1Regs:$b)>;
def : Pat<(setune Int1Regs:$a, Int1Regs:$b),
          (XORb1rr Int1Regs:$a, Int1Regs:$b)>;

def : Pat<(seteq Int1Regs:$a, Int1Regs:$b),
          (NOT1 (XORb1rr Int1Regs:$a, Int1Regs:$b))>;
def : Pat<(setueq Int1Regs:$a, Int1Regs:$b),
          (NOT1 (XORb1rr Int1Regs:$a, Int1Regs:$b))>;

// i1 compare -> i32
def : Pat<(i32 (setne Int1Regs:$a, Int1Regs:$b)),
          (SELP_u32ii -1, 0, (XORb1rr Int1Regs:$a, Int1Regs:$b))>;
def : Pat<(i32 (setne Int1Regs:$a, Int1Regs:$b)),
          (SELP_u32ii 0, -1, (XORb1rr Int1Regs:$a, Int1Regs:$b))>;


multiclass FSET_FORMAT<PatFrag OpNode, PatLeaf Mode, PatLeaf ModeFTZ> {
  // f32 -> pred
  def : Pat<(i1 (OpNode Float32Regs:$a, Float32Regs:$b)),
            (SETP_f32rr Float32Regs:$a, Float32Regs:$b, ModeFTZ)>,
        Requires<[doF32FTZ]>;
  def : Pat<(i1 (OpNode Float32Regs:$a, Float32Regs:$b)),
            (SETP_f32rr Float32Regs:$a, Float32Regs:$b, Mode)>;
  def : Pat<(i1 (OpNode Float32Regs:$a, fpimm:$b)),
            (SETP_f32ri Float32Regs:$a, fpimm:$b, ModeFTZ)>,
        Requires<[doF32FTZ]>;
  def : Pat<(i1 (OpNode Float32Regs:$a, fpimm:$b)),
            (SETP_f32ri Float32Regs:$a, fpimm:$b, Mode)>;
  def : Pat<(i1 (OpNode fpimm:$a, Float32Regs:$b)),
            (SETP_f32ir fpimm:$a, Float32Regs:$b, ModeFTZ)>,
        Requires<[doF32FTZ]>;
  def : Pat<(i1 (OpNode fpimm:$a, Float32Regs:$b)),
            (SETP_f32ir fpimm:$a, Float32Regs:$b, Mode)>;

  // f64 -> pred
  def : Pat<(i1 (OpNode Float64Regs:$a, Float64Regs:$b)),
            (SETP_f64rr Float64Regs:$a, Float64Regs:$b, Mode)>;
  def : Pat<(i1 (OpNode Float64Regs:$a, fpimm:$b)),
            (SETP_f64ri Float64Regs:$a, fpimm:$b, Mode)>;
  def : Pat<(i1 (OpNode fpimm:$a, Float64Regs:$b)),
            (SETP_f64ir fpimm:$a, Float64Regs:$b, Mode)>;

  // f32 -> i32
  def : Pat<(i32 (OpNode Float32Regs:$a, Float32Regs:$b)),
            (SET_f32rr Float32Regs:$a, Float32Regs:$b, ModeFTZ)>,
        Requires<[doF32FTZ]>;
  def : Pat<(i32 (OpNode Float32Regs:$a, Float32Regs:$b)),
            (SET_f32rr Float32Regs:$a, Float32Regs:$b, Mode)>;
  def : Pat<(i32 (OpNode Float32Regs:$a, fpimm:$b)),
            (SET_f32ri Float32Regs:$a, fpimm:$b, ModeFTZ)>,
        Requires<[doF32FTZ]>;
  def : Pat<(i32 (OpNode Float32Regs:$a, fpimm:$b)),
            (SET_f32ri Float32Regs:$a, fpimm:$b, Mode)>;
  def : Pat<(i32 (OpNode fpimm:$a, Float32Regs:$b)),
            (SET_f32ir fpimm:$a, Float32Regs:$b, ModeFTZ)>,
        Requires<[doF32FTZ]>;
  def : Pat<(i32 (OpNode fpimm:$a, Float32Regs:$b)),
            (SET_f32ir fpimm:$a, Float32Regs:$b, Mode)>;

  // f64 -> i32
  def : Pat<(i32 (OpNode Float64Regs:$a, Float64Regs:$b)),
            (SET_f64rr Float64Regs:$a, Float64Regs:$b, Mode)>;
  def : Pat<(i32 (OpNode Float64Regs:$a, fpimm:$b)),
            (SET_f64ri Float64Regs:$a, fpimm:$b, Mode)>;
  def : Pat<(i32 (OpNode fpimm:$a, Float64Regs:$b)),
            (SET_f64ir fpimm:$a, Float64Regs:$b, Mode)>;
}

defm FSetGT : FSET_FORMAT<setogt, CmpGT, CmpGT_FTZ>;
defm FSetLT : FSET_FORMAT<setolt, CmpLT, CmpLT_FTZ>;
defm FSetGE : FSET_FORMAT<setoge, CmpGE, CmpGE_FTZ>;
defm FSetLE : FSET_FORMAT<setole, CmpLE, CmpLE_FTZ>;
defm FSetEQ : FSET_FORMAT<setoeq, CmpEQ, CmpEQ_FTZ>;
defm FSetNE : FSET_FORMAT<setone, CmpNE, CmpNE_FTZ>;

defm FSetUGT : FSET_FORMAT<setugt, CmpGTU, CmpGTU_FTZ>;
defm FSetULT : FSET_FORMAT<setult, CmpLTU, CmpLTU_FTZ>;
defm FSetUGE : FSET_FORMAT<setuge, CmpGEU, CmpGEU_FTZ>;
defm FSetULE : FSET_FORMAT<setule, CmpLEU, CmpLEU_FTZ>;
defm FSetUEQ : FSET_FORMAT<setueq, CmpEQU, CmpEQU_FTZ>;
defm FSetUNE : FSET_FORMAT<setune, CmpNEU, CmpNEU_FTZ>;

defm FSetNUM : FSET_FORMAT<seto, CmpNUM, CmpNUM_FTZ>;
defm FSetNAN : FSET_FORMAT<setuo, CmpNAN, CmpNAN_FTZ>;

//def ld_param         : SDNode<"NVPTXISD::LOAD_PARAM", SDTLoad,
//                        [SDNPHasChain, SDNPMayLoad, SDNPMemOperand]>;

def SDTDeclareParamProfile : SDTypeProfile<0, 3, [SDTCisInt<0>, SDTCisInt<1>,
  SDTCisInt<2>]>;
def SDTDeclareScalarParamProfile : SDTypeProfile<0, 3, [SDTCisInt<0>,
  SDTCisInt<1>, SDTCisInt<2>]>;
def SDTLoadParamProfile : SDTypeProfile<1, 2, [SDTCisInt<1>, SDTCisInt<2>]>;
def SDTLoadParamV2Profile : SDTypeProfile<2, 2, [SDTCisSameAs<0, 1>, SDTCisInt<2>, SDTCisInt<3>]>;
def SDTLoadParamV4Profile : SDTypeProfile<4, 2, [SDTCisInt<4>, SDTCisInt<5>]>;
def SDTPrintCallProfile : SDTypeProfile<0, 1, [SDTCisInt<0>]>;
def SDTPrintCallUniProfile : SDTypeProfile<0, 1, [SDTCisInt<0>]>;
def SDTStoreParamProfile : SDTypeProfile<0, 3, [SDTCisInt<0>, SDTCisInt<1>]>;
def SDTStoreParamV2Profile : SDTypeProfile<0, 4, [SDTCisInt<0>, SDTCisInt<1>]>;
def SDTStoreParamV4Profile : SDTypeProfile<0, 6, [SDTCisInt<0>, SDTCisInt<1>]>;
def SDTStoreParam32Profile : SDTypeProfile<0, 3, [SDTCisInt<0>, SDTCisInt<1>]>;
def SDTCallArgProfile : SDTypeProfile<0, 2, [SDTCisInt<0>]>;
def SDTCallArgMarkProfile : SDTypeProfile<0, 0, []>;
def SDTCallVoidProfile : SDTypeProfile<0, 1, []>;
def SDTCallValProfile : SDTypeProfile<1, 0, []>;
def SDTMoveParamProfile : SDTypeProfile<1, 1, []>;
def SDTStoreRetvalProfile : SDTypeProfile<0, 2, [SDTCisInt<0>]>;
def SDTStoreRetvalV2Profile : SDTypeProfile<0, 3, [SDTCisInt<0>]>;
def SDTStoreRetvalV4Profile : SDTypeProfile<0, 5, [SDTCisInt<0>]>;
def SDTPseudoUseParamProfile : SDTypeProfile<0, 1, []>;

def DeclareParam : SDNode<"NVPTXISD::DeclareParam", SDTDeclareParamProfile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def DeclareScalarParam : SDNode<"NVPTXISD::DeclareScalarParam",
  SDTDeclareScalarParamProfile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def DeclareRetParam : SDNode<"NVPTXISD::DeclareRetParam",
  SDTDeclareParamProfile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def DeclareRet   : SDNode<"NVPTXISD::DeclareRet", SDTDeclareScalarParamProfile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def LoadParam    : SDNode<"NVPTXISD::LoadParam", SDTLoadParamProfile,
                         [SDNPHasChain, SDNPMayLoad, SDNPOutGlue, SDNPInGlue]>;
def LoadParamV2  : SDNode<"NVPTXISD::LoadParamV2", SDTLoadParamV2Profile,
                         [SDNPHasChain, SDNPMayLoad, SDNPOutGlue, SDNPInGlue]>;
def LoadParamV4  : SDNode<"NVPTXISD::LoadParamV4", SDTLoadParamV4Profile,
                         [SDNPHasChain, SDNPMayLoad, SDNPOutGlue, SDNPInGlue]>;
def PrintCall    : SDNode<"NVPTXISD::PrintCall", SDTPrintCallProfile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def PrintCallUni : SDNode<"NVPTXISD::PrintCallUni", SDTPrintCallUniProfile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def StoreParam   : SDNode<"NVPTXISD::StoreParam", SDTStoreParamProfile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def StoreParamV2 : SDNode<"NVPTXISD::StoreParamV2", SDTStoreParamV2Profile,
                         [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def StoreParamV4 : SDNode<"NVPTXISD::StoreParamV4", SDTStoreParamV4Profile,
                         [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def StoreParamU32 : SDNode<"NVPTXISD::StoreParamU32", SDTStoreParam32Profile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def StoreParamS32 : SDNode<"NVPTXISD::StoreParamS32", SDTStoreParam32Profile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def CallArgBegin : SDNode<"NVPTXISD::CallArgBegin", SDTCallArgMarkProfile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def CallArg      : SDNode<"NVPTXISD::CallArg", SDTCallArgProfile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def LastCallArg  : SDNode<"NVPTXISD::LastCallArg", SDTCallArgProfile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def CallArgEnd   : SDNode<"NVPTXISD::CallArgEnd", SDTCallVoidProfile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def CallVoid     : SDNode<"NVPTXISD::CallVoid", SDTCallVoidProfile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def Prototype    : SDNode<"NVPTXISD::Prototype", SDTCallVoidProfile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def CallVal      : SDNode<"NVPTXISD::CallVal", SDTCallValProfile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def MoveParam    : SDNode<"NVPTXISD::MoveParam", SDTMoveParamProfile,
                         []>;
def StoreRetval  : SDNode<"NVPTXISD::StoreRetval", SDTStoreRetvalProfile,
                         [SDNPHasChain, SDNPSideEffect]>;
def StoreRetvalV2  : SDNode<"NVPTXISD::StoreRetvalV2", SDTStoreRetvalV2Profile,
                           [SDNPHasChain, SDNPSideEffect]>;
def StoreRetvalV4  : SDNode<"NVPTXISD::StoreRetvalV4", SDTStoreRetvalV4Profile,
                           [SDNPHasChain, SDNPSideEffect]>;
def PseudoUseParam : SDNode<"NVPTXISD::PseudoUseParam",
  SDTPseudoUseParamProfile,
                       [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def RETURNNode   : SDNode<"NVPTXISD::RETURN", SDTCallArgMarkProfile,
                         [SDNPHasChain, SDNPSideEffect]>;

class LoadParamMemInst<NVPTXRegClass regclass, string opstr> :
      NVPTXInst<(outs regclass:$dst), (ins i32imm:$b),
                !strconcat(!strconcat("ld.param", opstr),
                "\t$dst, [retval0+$b];"),
                []>;

class LoadParamRegInst<NVPTXRegClass regclass, string opstr> :
      NVPTXInst<(outs regclass:$dst), (ins i32imm:$b),
                !strconcat(!strconcat("mov", opstr),
                "\t$dst, retval$b;"),
                [(set regclass:$dst, (LoadParam (i32 0), (i32 imm:$b)))]>;

class LoadParamV2MemInst<NVPTXRegClass regclass, string opstr> :
      NVPTXInst<(outs regclass:$dst, regclass:$dst2), (ins i32imm:$b),
                !strconcat(!strconcat("ld.param.v2", opstr),
                "\t{{$dst, $dst2}}, [retval0+$b];"), []>;

class LoadParamV4MemInst<NVPTXRegClass regclass, string opstr> :
      NVPTXInst<(outs regclass:$dst, regclass:$dst2, regclass:$dst3,
                      regclass:$dst4),
                (ins i32imm:$b),
                !strconcat(!strconcat("ld.param.v4", opstr),
                "\t{{$dst, $dst2, $dst3, $dst4}}, [retval0+$b];"), []>;

class StoreParamInst<NVPTXRegClass regclass, string opstr> :
      NVPTXInst<(outs), (ins regclass:$val, i32imm:$a, i32imm:$b),
                !strconcat(!strconcat("st.param", opstr),
                "\t[param$a+$b], $val;"),
                []>;

class StoreParamV2Inst<NVPTXRegClass regclass, string opstr> :
      NVPTXInst<(outs), (ins regclass:$val, regclass:$val2,
                             i32imm:$a, i32imm:$b),
                !strconcat(!strconcat("st.param.v2", opstr),
                "\t[param$a+$b], {{$val, $val2}};"),
                []>;

class StoreParamV4Inst<NVPTXRegClass regclass, string opstr> :
      NVPTXInst<(outs), (ins regclass:$val, regclass:$val1, regclass:$val2,
                             regclass:$val3, i32imm:$a, i32imm:$b),
                !strconcat(!strconcat("st.param.v4", opstr),
                "\t[param$a+$b], {{$val, $val2, $val3, $val4}};"),
                []>;

class StoreRetvalInst<NVPTXRegClass regclass, string opstr> :
      NVPTXInst<(outs), (ins regclass:$val, i32imm:$a),
                !strconcat(!strconcat("st.param", opstr),
                "\t[func_retval0+$a], $val;"),
                []>;

class StoreRetvalV2Inst<NVPTXRegClass regclass, string opstr> :
      NVPTXInst<(outs), (ins regclass:$val, regclass:$val2, i32imm:$a),
                !strconcat(!strconcat("st.param.v2", opstr),
                "\t[func_retval0+$a], {{$val, $val2}};"),
                []>;

class StoreRetvalV4Inst<NVPTXRegClass regclass, string opstr> :
      NVPTXInst<(outs),
                (ins regclass:$val, regclass:$val2, regclass:$val3,
                     regclass:$val4, i32imm:$a),
                !strconcat(!strconcat("st.param.v4", opstr),
                "\t[func_retval0+$a], {{$val, $val2, $val3, $val4}};"),
                []>;

def PrintCallRetInst1 : NVPTXInst<(outs), (ins),
"call (retval0), ",
                                [(PrintCall (i32 1))]>;
def PrintCallRetInst2 : NVPTXInst<(outs), (ins),
"call (retval0, retval1), ",
                                [(PrintCall (i32 2))]>;
def PrintCallRetInst3 : NVPTXInst<(outs), (ins),
"call (retval0, retval1, retval2), ",
                                [(PrintCall (i32 3))]>;
def PrintCallRetInst4 : NVPTXInst<(outs), (ins),
"call (retval0, retval1, retval2, retval3), ",
                                [(PrintCall (i32 4))]>;
def PrintCallRetInst5 : NVPTXInst<(outs), (ins),
"call (retval0, retval1, retval2, retval3, retval4), ",
                                [(PrintCall (i32 5))]>;
def PrintCallRetInst6 : NVPTXInst<(outs), (ins),
"call (retval0, retval1, retval2, retval3, retval4, retval5), ",
                                [(PrintCall (i32 6))]>;
def PrintCallRetInst7 : NVPTXInst<(outs), (ins),
"call (retval0, retval1, retval2, retval3, retval4, retval5, retval6), ",
                                [(PrintCall (i32 7))]>;
def PrintCallRetInst8 : NVPTXInst<(outs), (ins),
!strconcat("call (retval0, retval1, retval2, retval3, retval4",
           ", retval5, retval6, retval7), "),
                                [(PrintCall (i32 8))]>;

def PrintCallNoRetInst : NVPTXInst<(outs), (ins), "call ",
                                [(PrintCall (i32 0))]>;

def PrintCallUniRetInst1 : NVPTXInst<(outs), (ins),
"call.uni (retval0), ",
                                [(PrintCallUni (i32 1))]>;
def PrintCallUniRetInst2 : NVPTXInst<(outs), (ins),
"call.uni (retval0, retval1), ",
                                [(PrintCallUni (i32 2))]>;
def PrintCallUniRetInst3 : NVPTXInst<(outs), (ins),
"call.uni (retval0, retval1, retval2), ",
                                [(PrintCallUni (i32 3))]>;
def PrintCallUniRetInst4 : NVPTXInst<(outs), (ins),
"call.uni (retval0, retval1, retval2, retval3), ",
                                [(PrintCallUni (i32 4))]>;
def PrintCallUniRetInst5 : NVPTXInst<(outs), (ins),
"call.uni (retval0, retval1, retval2, retval3, retval4), ",
                                [(PrintCallUni (i32 5))]>;
def PrintCallUniRetInst6 : NVPTXInst<(outs), (ins),
"call.uni (retval0, retval1, retval2, retval3, retval4, retval5), ",
                                [(PrintCallUni (i32 6))]>;
def PrintCallUniRetInst7 : NVPTXInst<(outs), (ins),
"call.uni (retval0, retval1, retval2, retval3, retval4, retval5, retval6), ",
                                [(PrintCallUni (i32 7))]>;
def PrintCallUniRetInst8 : NVPTXInst<(outs), (ins),
!strconcat("call.uni (retval0, retval1, retval2, retval3, retval4",
           ", retval5, retval6, retval7), "),
                                [(PrintCallUni (i32 8))]>;

def PrintCallUniNoRetInst : NVPTXInst<(outs), (ins), "call.uni ",
                                [(PrintCallUni (i32 0))]>;

def LoadParamMemI64    : LoadParamMemInst<Int64Regs, ".b64">;
def LoadParamMemI32    : LoadParamMemInst<Int32Regs, ".b32">;
def LoadParamMemI16    : LoadParamMemInst<Int16Regs, ".b16">;
def LoadParamMemI8     : LoadParamMemInst<Int16Regs, ".b8">;
def LoadParamMemV2I64  : LoadParamV2MemInst<Int64Regs, ".b64">;
def LoadParamMemV2I32  : LoadParamV2MemInst<Int32Regs, ".b32">;
def LoadParamMemV2I16  : LoadParamV2MemInst<Int16Regs, ".b16">;
def LoadParamMemV2I8   : LoadParamV2MemInst<Int16Regs, ".b8">;
def LoadParamMemV4I32  : LoadParamV4MemInst<Int32Regs, ".b32">;
def LoadParamMemV4I16  : LoadParamV4MemInst<Int16Regs, ".b16">;
def LoadParamMemV4I8   : LoadParamV4MemInst<Int16Regs, ".b8">;
def LoadParamMemF32    : LoadParamMemInst<Float32Regs, ".f32">;
def LoadParamMemF64    : LoadParamMemInst<Float64Regs, ".f64">;
def LoadParamMemV2F32  : LoadParamV2MemInst<Float32Regs, ".f32">;
def LoadParamMemV2F64  : LoadParamV2MemInst<Float64Regs, ".f64">;
def LoadParamMemV4F32  : LoadParamV4MemInst<Float32Regs, ".f32">;

def StoreParamI64    : StoreParamInst<Int64Regs, ".b64">;
def StoreParamI32    : StoreParamInst<Int32Regs, ".b32">;

def StoreParamI16    : StoreParamInst<Int16Regs, ".b16">;
def StoreParamI8     : StoreParamInst<Int16Regs, ".b8">;
def StoreParamV2I64  : StoreParamV2Inst<Int64Regs, ".b64">;
def StoreParamV2I32  : StoreParamV2Inst<Int32Regs, ".b32">;
def StoreParamV2I16  : StoreParamV2Inst<Int16Regs, ".b16">;
def StoreParamV2I8   : StoreParamV2Inst<Int16Regs, ".b8">;

// FIXME: StoreParamV4Inst crashes llvm-tblgen :(
//def StoreParamV4I32    : StoreParamV4Inst<Int32Regs, ".b32">;
def StoreParamV4I32    : NVPTXInst<(outs), (ins Int32Regs:$val, Int32Regs:$val2,
                                               Int32Regs:$val3, Int32Regs:$val4,
                                                i32imm:$a, i32imm:$b),
                "st.param.v4.b32\t[param$a+$b], {{$val, $val2, $val3, $val4}};",
                         []>;

def StoreParamV4I16    : NVPTXInst<(outs), (ins Int16Regs:$val, Int16Regs:$val2,
                                               Int16Regs:$val3, Int16Regs:$val4,
                                                i32imm:$a, i32imm:$b),
                "st.param.v4.b16\t[param$a+$b], {{$val, $val2, $val3, $val4}};",
                         []>;

def StoreParamV4I8     : NVPTXInst<(outs), (ins Int16Regs:$val, Int16Regs:$val2,
                                                Int16Regs:$val3, Int16Regs:$val4,
                                                i32imm:$a, i32imm:$b),
                 "st.param.v4.b8\t[param$a+$b], {{$val, $val2, $val3, $val4}};",
                         []>;

def StoreParamF32    : StoreParamInst<Float32Regs, ".f32">;
def StoreParamF64    : StoreParamInst<Float64Regs, ".f64">;
def StoreParamV2F32    : StoreParamV2Inst<Float32Regs, ".f32">;
def StoreParamV2F64    : StoreParamV2Inst<Float64Regs, ".f64">;
// FIXME: StoreParamV4Inst crashes llvm-tblgen :(
//def StoreParamV4F32    : StoreParamV4Inst<Float32Regs, ".f32">;
def StoreParamV4F32    : NVPTXInst<(outs),
                                   (ins Float32Regs:$val, Float32Regs:$val2,
                                        Float32Regs:$val3, Float32Regs:$val4,
                                        i32imm:$a, i32imm:$b),
                "st.param.v4.f32\t[param$a+$b], {{$val, $val2, $val3, $val4}};",
                        []>;


def StoreRetvalI64    : StoreRetvalInst<Int64Regs, ".b64">;
def StoreRetvalI32    : StoreRetvalInst<Int32Regs, ".b32">;
def StoreRetvalI16    : StoreRetvalInst<Int16Regs, ".b16">;
def StoreRetvalI8     : StoreRetvalInst<Int16Regs, ".b8">;
def StoreRetvalV2I64  : StoreRetvalV2Inst<Int64Regs, ".b64">;
def StoreRetvalV2I32  : StoreRetvalV2Inst<Int32Regs, ".b32">;
def StoreRetvalV2I16  : StoreRetvalV2Inst<Int16Regs, ".b16">;
def StoreRetvalV2I8   : StoreRetvalV2Inst<Int16Regs, ".b8">;
def StoreRetvalV4I32  : StoreRetvalV4Inst<Int32Regs, ".b32">;
def StoreRetvalV4I16  : StoreRetvalV4Inst<Int16Regs, ".b16">;
def StoreRetvalV4I8   : StoreRetvalV4Inst<Int16Regs, ".b8">;

def StoreRetvalF64    : StoreRetvalInst<Float64Regs, ".f64">;
def StoreRetvalF32    : StoreRetvalInst<Float32Regs, ".f32">;
def StoreRetvalV2F64  : StoreRetvalV2Inst<Float64Regs, ".f64">;
def StoreRetvalV2F32  : StoreRetvalV2Inst<Float32Regs, ".f32">;
def StoreRetvalV4F32  : StoreRetvalV4Inst<Float32Regs, ".f32">;

def CallArgBeginInst : NVPTXInst<(outs), (ins), "(", [(CallArgBegin)]>;
def CallArgEndInst1  : NVPTXInst<(outs), (ins), ");", [(CallArgEnd (i32 1))]>;
def CallArgEndInst0  : NVPTXInst<(outs), (ins), ")", [(CallArgEnd (i32 0))]>;
def RETURNInst       : NVPTXInst<(outs), (ins), "ret;", [(RETURNNode)]>;

class CallArgInst<NVPTXRegClass regclass> :
      NVPTXInst<(outs), (ins regclass:$a), "$a, ",
                [(CallArg (i32 0), regclass:$a)]>;

class LastCallArgInst<NVPTXRegClass regclass> :
      NVPTXInst<(outs), (ins regclass:$a), "$a",
                [(LastCallArg (i32 0), regclass:$a)]>;

def CallArgI64     : CallArgInst<Int64Regs>;
def CallArgI32     : CallArgInst<Int32Regs>;
def CallArgI16     : CallArgInst<Int16Regs>;

def CallArgF64     : CallArgInst<Float64Regs>;
def CallArgF32     : CallArgInst<Float32Regs>;

def LastCallArgI64 : LastCallArgInst<Int64Regs>;
def LastCallArgI32 : LastCallArgInst<Int32Regs>;
def LastCallArgI16 : LastCallArgInst<Int16Regs>;

def LastCallArgF64 : LastCallArgInst<Float64Regs>;
def LastCallArgF32 : LastCallArgInst<Float32Regs>;

def CallArgI32imm : NVPTXInst<(outs), (ins i32imm:$a), "$a, ",
                              [(CallArg (i32 0), (i32 imm:$a))]>;
def LastCallArgI32imm : NVPTXInst<(outs), (ins i32imm:$a), "$a",
                              [(LastCallArg (i32 0), (i32 imm:$a))]>;

def CallArgParam : NVPTXInst<(outs), (ins i32imm:$a), "param$a, ",
                             [(CallArg (i32 1), (i32 imm:$a))]>;
def LastCallArgParam : NVPTXInst<(outs), (ins i32imm:$a), "param$a",
                             [(LastCallArg (i32 1), (i32 imm:$a))]>;

def CallVoidInst : NVPTXInst<(outs), (ins imem:$addr),
                             "$addr, ",
                             [(CallVoid (Wrapper tglobaladdr:$addr))]>;
def CallVoidInstReg : NVPTXInst<(outs), (ins Int32Regs:$addr),
                             "$addr, ",
                             [(CallVoid Int32Regs:$addr)]>;
def CallVoidInstReg64 : NVPTXInst<(outs), (ins Int64Regs:$addr),
                             "$addr, ",
                             [(CallVoid Int64Regs:$addr)]>;
def PrototypeInst : NVPTXInst<(outs), (ins i32imm:$val),
                             ", prototype_$val;",
                             [(Prototype (i32 imm:$val))]>;

def DeclareRetMemInst : NVPTXInst<(outs),
  (ins i32imm:$align, i32imm:$size, i32imm:$num),
         ".param .align $align .b8 retval$num[$size];",
         [(DeclareRetParam (i32 imm:$align), (i32 imm:$size), (i32 imm:$num))]>;
def DeclareRetScalarInst : NVPTXInst<(outs), (ins i32imm:$size, i32imm:$num),
         ".param .b$size retval$num;",
         [(DeclareRet (i32 1), (i32 imm:$size), (i32 imm:$num))]>;
def DeclareRetRegInst : NVPTXInst<(outs), (ins i32imm:$size, i32imm:$num),
         ".reg .b$size retval$num;",
         [(DeclareRet (i32 2), (i32 imm:$size), (i32 imm:$num))]>;

def DeclareParamInst : NVPTXInst<(outs),
  (ins i32imm:$align, i32imm:$a, i32imm:$size),
         ".param .align $align .b8 param$a[$size];",
         [(DeclareParam (i32 imm:$align), (i32 imm:$a), (i32 imm:$size))]>;
def DeclareScalarParamInst : NVPTXInst<(outs), (ins i32imm:$a, i32imm:$size),
         ".param .b$size param$a;",
         [(DeclareScalarParam (i32 imm:$a), (i32 imm:$size), (i32 0))]>;
def DeclareScalarRegInst : NVPTXInst<(outs), (ins i32imm:$a, i32imm:$size),
         ".reg .b$size param$a;",
         [(DeclareScalarParam (i32 imm:$a), (i32 imm:$size), (i32 1))]>;

class MoveParamInst<NVPTXRegClass regclass, string asmstr> :
      NVPTXInst<(outs regclass:$dst), (ins regclass:$src),
                !strconcat(!strconcat("mov", asmstr), "\t$dst, $src;"),
                [(set regclass:$dst, (MoveParam regclass:$src))]>;

def MoveParamI64 : MoveParamInst<Int64Regs, ".b64">;
def MoveParamI32 : MoveParamInst<Int32Regs, ".b32">;
def MoveParamI16 : NVPTXInst<(outs Int16Regs:$dst), (ins Int16Regs:$src),
                   "cvt.u16.u32\t$dst, $src;",
                   [(set Int16Regs:$dst, (MoveParam Int16Regs:$src))]>;
def MoveParamF64 : MoveParamInst<Float64Regs, ".f64">;
def MoveParamF32 : MoveParamInst<Float32Regs, ".f32">;

class PseudoUseParamInst<NVPTXRegClass regclass> :
      NVPTXInst<(outs), (ins regclass:$src),
      "// Pseudo use of $src",
      [(PseudoUseParam regclass:$src)]>;

def PseudoUseParamI64 : PseudoUseParamInst<Int64Regs>;
def PseudoUseParamI32 : PseudoUseParamInst<Int32Regs>;
def PseudoUseParamI16 : PseudoUseParamInst<Int16Regs>;
def PseudoUseParamF64 : PseudoUseParamInst<Float64Regs>;
def PseudoUseParamF32 : PseudoUseParamInst<Float32Regs>;


//
// Load / Store Handling
//
multiclass LD<NVPTXRegClass regclass> {
  def _avar : NVPTXInst<(outs regclass:$dst),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, imem:$addr),
!strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
           "$fromWidth \t$dst, [$addr];"), []>;
  def _areg : NVPTXInst<(outs regclass:$dst),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, Int32Regs:$addr),
!strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
           "$fromWidth \t$dst, [$addr];"), []>;
  def _areg_64 : NVPTXInst<(outs regclass:$dst),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
     i32imm:$fromWidth, Int64Regs:$addr),
     !strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}$fromWidth",
                " \t$dst, [$addr];"), []>;
  def _ari : NVPTXInst<(outs regclass:$dst),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, Int32Regs:$addr, i32imm:$offset),
!strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
           "$fromWidth \t$dst, [$addr+$offset];"), []>;
  def _ari_64 : NVPTXInst<(outs regclass:$dst),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
     i32imm:$fromWidth, Int64Regs:$addr, i32imm:$offset),
    !strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}$fromWidth",
               " \t$dst, [$addr+$offset];"), []>;
  def _asi : NVPTXInst<(outs regclass:$dst),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, imem:$addr, i32imm:$offset),
!strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
           "$fromWidth \t$dst, [$addr+$offset];"), []>;
}

let mayLoad=1, hasSideEffects=0 in {
defm LD_i8  : LD<Int16Regs>;
defm LD_i16 : LD<Int16Regs>;
defm LD_i32 : LD<Int32Regs>;
defm LD_i64 : LD<Int64Regs>;
defm LD_f32 : LD<Float32Regs>;
defm LD_f64 : LD<Float64Regs>;
}

multiclass ST<NVPTXRegClass regclass> {
  def _avar : NVPTXInst<(outs),
    (ins regclass:$src, LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec,
      LdStCode:$Sign, i32imm:$toWidth, imem:$addr),
!strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}$toWidth",
           " \t[$addr], $src;"), []>;
  def _areg : NVPTXInst<(outs),
    (ins regclass:$src, LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec,
      LdStCode:$Sign, i32imm:$toWidth, Int32Regs:$addr),
!strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}$toWidth",
           " \t[$addr], $src;"), []>;
  def _areg_64 : NVPTXInst<(outs),
    (ins regclass:$src, LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec,
     LdStCode:$Sign, i32imm:$toWidth, Int64Regs:$addr),
  !strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}$toWidth ",
               "\t[$addr], $src;"), []>;
  def _ari : NVPTXInst<(outs),
    (ins regclass:$src, LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec,
      LdStCode:$Sign, i32imm:$toWidth, Int32Regs:$addr, i32imm:$offset),
!strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}$toWidth",
           " \t[$addr+$offset], $src;"), []>;
  def _ari_64 : NVPTXInst<(outs),
    (ins regclass:$src, LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec,
     LdStCode:$Sign, i32imm:$toWidth, Int64Regs:$addr, i32imm:$offset),
  !strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}$toWidth ",
               "\t[$addr+$offset], $src;"), []>;
  def _asi : NVPTXInst<(outs),
    (ins regclass:$src, LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec,
      LdStCode:$Sign, i32imm:$toWidth, imem:$addr, i32imm:$offset),
!strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}$toWidth",
           " \t[$addr+$offset], $src;"), []>;
}

let mayStore=1, hasSideEffects=0 in {
defm ST_i8  : ST<Int16Regs>;
defm ST_i16 : ST<Int16Regs>;
defm ST_i32 : ST<Int32Regs>;
defm ST_i64 : ST<Int64Regs>;
defm ST_f32 : ST<Float32Regs>;
defm ST_f64 : ST<Float64Regs>;
}

// The following is used only in and after vector elementizations.
// Vector elementization happens at the machine instruction level, so the
// following instruction
// never appears in the DAG.
multiclass LD_VEC<NVPTXRegClass regclass> {
  def _v2_avar : NVPTXInst<(outs regclass:$dst1, regclass:$dst2),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, imem:$addr),
    !strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t{{$dst1, $dst2}}, [$addr];"), []>;
  def _v2_areg : NVPTXInst<(outs regclass:$dst1, regclass:$dst2),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, Int32Regs:$addr),
    !strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t{{$dst1, $dst2}}, [$addr];"), []>;
  def _v2_areg_64 : NVPTXInst<(outs regclass:$dst1, regclass:$dst2),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
     i32imm:$fromWidth, Int64Regs:$addr),
    !strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t{{$dst1, $dst2}}, [$addr];"), []>;
  def _v2_ari : NVPTXInst<(outs regclass:$dst1, regclass:$dst2),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, Int32Regs:$addr, i32imm:$offset),
    !strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t{{$dst1, $dst2}}, [$addr+$offset];"), []>;
  def _v2_ari_64 : NVPTXInst<(outs regclass:$dst1, regclass:$dst2),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
     i32imm:$fromWidth, Int64Regs:$addr, i32imm:$offset),
    !strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t{{$dst1, $dst2}}, [$addr+$offset];"), []>;
  def _v2_asi : NVPTXInst<(outs regclass:$dst1, regclass:$dst2),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, imem:$addr, i32imm:$offset),
    !strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t{{$dst1, $dst2}}, [$addr+$offset];"), []>;
  def _v4_avar : NVPTXInst<(outs regclass:$dst1, regclass:$dst2,
      regclass:$dst3, regclass:$dst4),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, imem:$addr),
    !strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t{{$dst1, $dst2, $dst3, $dst4}}, [$addr];"), []>;
  def _v4_areg : NVPTXInst<(outs regclass:$dst1, regclass:$dst2, regclass:$dst3,
      regclass:$dst4),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, Int32Regs:$addr),
    !strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t{{$dst1, $dst2, $dst3, $dst4}}, [$addr];"), []>;
  def _v4_areg_64 : NVPTXInst<(outs regclass:$dst1, regclass:$dst2,
                               regclass:$dst3, regclass:$dst4),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
     i32imm:$fromWidth, Int64Regs:$addr),
    !strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t{{$dst1, $dst2, $dst3, $dst4}}, [$addr];"), []>;
  def _v4_ari : NVPTXInst<(outs regclass:$dst1, regclass:$dst2, regclass:$dst3,
      regclass:$dst4),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, Int32Regs:$addr, i32imm:$offset),
    !strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t{{$dst1, $dst2, $dst3, $dst4}}, [$addr+$offset];"),
                []>;
  def _v4_ari_64 : NVPTXInst<(outs regclass:$dst1, regclass:$dst2,
                              regclass:$dst3, regclass:$dst4),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
     i32imm:$fromWidth, Int64Regs:$addr, i32imm:$offset),
    !strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t{{$dst1, $dst2, $dst3, $dst4}}, [$addr+$offset];"),
    []>;
  def _v4_asi : NVPTXInst<(outs regclass:$dst1, regclass:$dst2, regclass:$dst3,
      regclass:$dst4),
    (ins LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, imem:$addr, i32imm:$offset),
    !strconcat("ld${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t{{$dst1, $dst2, $dst3, $dst4}}, [$addr+$offset];"),
                []>;
}
let mayLoad=1, hasSideEffects=0 in {
defm LDV_i8  : LD_VEC<Int16Regs>;
defm LDV_i16 : LD_VEC<Int16Regs>;
defm LDV_i32 : LD_VEC<Int32Regs>;
defm LDV_i64 : LD_VEC<Int64Regs>;
defm LDV_f32 : LD_VEC<Float32Regs>;
defm LDV_f64 : LD_VEC<Float64Regs>;
}

multiclass ST_VEC<NVPTXRegClass regclass> {
  def _v2_avar : NVPTXInst<(outs),
    (ins regclass:$src1, regclass:$src2, LdStCode:$isVol, LdStCode:$addsp,
      LdStCode:$Vec, LdStCode:$Sign, i32imm:$fromWidth, imem:$addr),
    !strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t[$addr], {{$src1, $src2}};"), []>;
  def _v2_areg : NVPTXInst<(outs),
    (ins regclass:$src1, regclass:$src2, LdStCode:$isVol, LdStCode:$addsp,
      LdStCode:$Vec, LdStCode:$Sign, i32imm:$fromWidth, Int32Regs:$addr),
    !strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t[$addr], {{$src1, $src2}};"), []>;
  def _v2_areg_64 : NVPTXInst<(outs),
    (ins regclass:$src1, regclass:$src2, LdStCode:$isVol, LdStCode:$addsp,
     LdStCode:$Vec, LdStCode:$Sign, i32imm:$fromWidth, Int64Regs:$addr),
    !strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t[$addr], {{$src1, $src2}};"), []>;
  def _v2_ari : NVPTXInst<(outs),
    (ins regclass:$src1, regclass:$src2, LdStCode:$isVol, LdStCode:$addsp,
      LdStCode:$Vec, LdStCode:$Sign, i32imm:$fromWidth, Int32Regs:$addr,
      i32imm:$offset),
    !strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t[$addr+$offset], {{$src1, $src2}};"), []>;
  def _v2_ari_64 : NVPTXInst<(outs),
    (ins regclass:$src1, regclass:$src2, LdStCode:$isVol, LdStCode:$addsp,
     LdStCode:$Vec, LdStCode:$Sign, i32imm:$fromWidth, Int64Regs:$addr,
     i32imm:$offset),
    !strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t[$addr+$offset], {{$src1, $src2}};"), []>;
  def _v2_asi : NVPTXInst<(outs),
    (ins regclass:$src1, regclass:$src2, LdStCode:$isVol, LdStCode:$addsp,
      LdStCode:$Vec, LdStCode:$Sign, i32imm:$fromWidth, imem:$addr,
      i32imm:$offset),
    !strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t[$addr+$offset], {{$src1, $src2}};"), []>;
  def _v4_avar : NVPTXInst<(outs),
    (ins regclass:$src1, regclass:$src2, regclass:$src3, regclass:$src4,
      LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, imem:$addr),
    !strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t[$addr], {{$src1, $src2, $src3, $src4}};"), []>;
  def _v4_areg : NVPTXInst<(outs),
    (ins regclass:$src1, regclass:$src2, regclass:$src3, regclass:$src4,
      LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, Int32Regs:$addr),
    !strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t[$addr], {{$src1, $src2, $src3, $src4}};"), []>;
  def _v4_areg_64 : NVPTXInst<(outs),
    (ins regclass:$src1, regclass:$src2, regclass:$src3, regclass:$src4,
     LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
     i32imm:$fromWidth, Int64Regs:$addr),
    !strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t[$addr], {{$src1, $src2, $src3, $src4}};"), []>;
  def _v4_ari : NVPTXInst<(outs),
    (ins regclass:$src1, regclass:$src2, regclass:$src3, regclass:$src4,
      LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, Int32Regs:$addr, i32imm:$offset),
    !strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t[$addr+$offset], {{$src1, $src2, $src3, $src4}};"),
    []>;
  def _v4_ari_64 : NVPTXInst<(outs),
    (ins regclass:$src1, regclass:$src2, regclass:$src3, regclass:$src4,
     LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
     i32imm:$fromWidth, Int64Regs:$addr, i32imm:$offset),
    !strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t[$addr+$offset], {{$src1, $src2, $src3, $src4}};"),
     []>;
  def _v4_asi : NVPTXInst<(outs),
    (ins regclass:$src1, regclass:$src2, regclass:$src3, regclass:$src4,
      LdStCode:$isVol, LdStCode:$addsp, LdStCode:$Vec, LdStCode:$Sign,
      i32imm:$fromWidth, imem:$addr, i32imm:$offset),
    !strconcat("st${isVol:volatile}${addsp:addsp}${Vec:vec}.${Sign:sign}",
               "$fromWidth \t[$addr+$offset], {{$src1, $src2, $src3, $src4}};"),
    []>;
}
let mayStore=1, hasSideEffects=0 in {
defm STV_i8  : ST_VEC<Int16Regs>;
defm STV_i16 : ST_VEC<Int16Regs>;
defm STV_i32 : ST_VEC<Int32Regs>;
defm STV_i64 : ST_VEC<Int64Regs>;
defm STV_f32 : ST_VEC<Float32Regs>;
defm STV_f64 : ST_VEC<Float64Regs>;
}


//---- Conversion ----

class F_BITCONVERT<string SzStr, NVPTXRegClass regclassIn,
  NVPTXRegClass regclassOut> :
           NVPTXInst<(outs regclassOut:$d), (ins regclassIn:$a),
           !strconcat("mov.b", !strconcat(SzStr, " \t $d, $a;")),
     [(set regclassOut:$d, (bitconvert regclassIn:$a))]>;

def BITCONVERT_32_I2F : F_BITCONVERT<"32", Int32Regs, Float32Regs>;
def BITCONVERT_32_F2I : F_BITCONVERT<"32", Float32Regs, Int32Regs>;
def BITCONVERT_64_I2F : F_BITCONVERT<"64", Int64Regs, Float64Regs>;
def BITCONVERT_64_F2I : F_BITCONVERT<"64", Float64Regs, Int64Regs>;

// NOTE: pred->fp are currently sub-optimal due to an issue in TableGen where
// we cannot specify floating-point literals in isel patterns.  Therefore, we
// use an integer selp to select either 1 or 0 and then cvt to floating-point.

// sint -> f32
def : Pat<(f32 (sint_to_fp Int1Regs:$a)),
          (CVT_f32_s32 (SELP_u32ii 1, 0, Int1Regs:$a), CvtRN)>;
def : Pat<(f32 (sint_to_fp Int16Regs:$a)),
          (CVT_f32_s16 Int16Regs:$a, CvtRN)>;
def : Pat<(f32 (sint_to_fp Int32Regs:$a)),
          (CVT_f32_s32 Int32Regs:$a, CvtRN)>;
def : Pat<(f32 (sint_to_fp Int64Regs:$a)),
          (CVT_f32_s64 Int64Regs:$a, CvtRN)>;

// uint -> f32
def : Pat<(f32 (uint_to_fp Int1Regs:$a)),
          (CVT_f32_u32 (SELP_u32ii 1, 0, Int1Regs:$a), CvtRN)>;
def : Pat<(f32 (uint_to_fp Int16Regs:$a)),
          (CVT_f32_u16 Int16Regs:$a, CvtRN)>;
def : Pat<(f32 (uint_to_fp Int32Regs:$a)),
          (CVT_f32_u32 Int32Regs:$a, CvtRN)>;
def : Pat<(f32 (uint_to_fp Int64Regs:$a)),
          (CVT_f32_u64 Int64Regs:$a, CvtRN)>;

// sint -> f64
def : Pat<(f64 (sint_to_fp Int1Regs:$a)),
          (CVT_f64_s32 (SELP_u32ii 1, 0, Int1Regs:$a), CvtRN)>;
def : Pat<(f64 (sint_to_fp Int16Regs:$a)),
          (CVT_f64_s16 Int16Regs:$a, CvtRN)>;
def : Pat<(f64 (sint_to_fp Int32Regs:$a)),
          (CVT_f64_s32 Int32Regs:$a, CvtRN)>;
def : Pat<(f64 (sint_to_fp Int64Regs:$a)),
          (CVT_f64_s64 Int64Regs:$a, CvtRN)>;

// uint -> f64
def : Pat<(f64 (uint_to_fp Int1Regs:$a)),
          (CVT_f64_u32 (SELP_u32ii 1, 0, Int1Regs:$a), CvtRN)>;
def : Pat<(f64 (uint_to_fp Int16Regs:$a)),
          (CVT_f64_u16 Int16Regs:$a, CvtRN)>;
def : Pat<(f64 (uint_to_fp Int32Regs:$a)),
          (CVT_f64_u32 Int32Regs:$a, CvtRN)>;
def : Pat<(f64 (uint_to_fp Int64Regs:$a)),
          (CVT_f64_u64 Int64Regs:$a, CvtRN)>;


// f32 -> sint
def : Pat<(i1 (fp_to_sint Float32Regs:$a)),
          (SETP_b32ri (BITCONVERT_32_F2I Float32Regs:$a), 0, CmpEQ)>;
def : Pat<(i16 (fp_to_sint Float32Regs:$a)),
          (CVT_s16_f32 Float32Regs:$a, CvtRZI_FTZ)>, Requires<[doF32FTZ]>;
def : Pat<(i16 (fp_to_sint Float32Regs:$a)),
          (CVT_s16_f32 Float32Regs:$a, CvtRZI)>;
def : Pat<(i32 (fp_to_sint Float32Regs:$a)),
          (CVT_s32_f32 Float32Regs:$a, CvtRZI_FTZ)>, Requires<[doF32FTZ]>;
def : Pat<(i32 (fp_to_sint Float32Regs:$a)),
          (CVT_s32_f32 Float32Regs:$a, CvtRZI)>;
def : Pat<(i64 (fp_to_sint Float32Regs:$a)),
          (CVT_s64_f32 Float32Regs:$a, CvtRZI_FTZ)>, Requires<[doF32FTZ]>;
def : Pat<(i64 (fp_to_sint Float32Regs:$a)),
          (CVT_s64_f32 Float32Regs:$a, CvtRZI)>;

// f32 -> uint
def : Pat<(i1 (fp_to_uint Float32Regs:$a)),
          (SETP_b32ri (BITCONVERT_32_F2I Float32Regs:$a), 0, CmpEQ)>;
def : Pat<(i16 (fp_to_uint Float32Regs:$a)),
          (CVT_u16_f32 Float32Regs:$a, CvtRZI_FTZ)>, Requires<[doF32FTZ]>;
def : Pat<(i16 (fp_to_uint Float32Regs:$a)),
          (CVT_u16_f32 Float32Regs:$a, CvtRZI)>;
def : Pat<(i32 (fp_to_uint Float32Regs:$a)),
          (CVT_u32_f32 Float32Regs:$a, CvtRZI_FTZ)>, Requires<[doF32FTZ]>;
def : Pat<(i32 (fp_to_uint Float32Regs:$a)),
          (CVT_u32_f32 Float32Regs:$a, CvtRZI)>;
def : Pat<(i64 (fp_to_uint Float32Regs:$a)),
          (CVT_u64_f32 Float32Regs:$a, CvtRZI_FTZ)>, Requires<[doF32FTZ]>;
def : Pat<(i64 (fp_to_uint Float32Regs:$a)),
          (CVT_u64_f32 Float32Regs:$a, CvtRZI)>;

// f64 -> sint
def : Pat<(i1 (fp_to_sint Float64Regs:$a)),
          (SETP_b64ri (BITCONVERT_64_F2I Float64Regs:$a), 0, CmpEQ)>;
def : Pat<(i16 (fp_to_sint Float64Regs:$a)),
          (CVT_s16_f64 Float64Regs:$a, CvtRZI)>;
def : Pat<(i32 (fp_to_sint Float64Regs:$a)),
          (CVT_s32_f64 Float64Regs:$a, CvtRZI)>;
def : Pat<(i64 (fp_to_sint Float64Regs:$a)),
          (CVT_s64_f64 Float64Regs:$a, CvtRZI)>;

// f64 -> uint
def : Pat<(i1 (fp_to_uint Float64Regs:$a)),
          (SETP_b64ri (BITCONVERT_64_F2I Float64Regs:$a), 0, CmpEQ)>;
def : Pat<(i16 (fp_to_uint Float64Regs:$a)),
          (CVT_u16_f64 Float64Regs:$a, CvtRZI)>;
def : Pat<(i32 (fp_to_uint Float64Regs:$a)),
          (CVT_u32_f64 Float64Regs:$a, CvtRZI)>;
def : Pat<(i64 (fp_to_uint Float64Regs:$a)),
          (CVT_u64_f64 Float64Regs:$a, CvtRZI)>;

// sext i1
def : Pat<(i16 (sext Int1Regs:$a)),
          (SELP_s16ii -1, 0, Int1Regs:$a)>;
def : Pat<(i32 (sext Int1Regs:$a)),
          (SELP_s32ii -1, 0, Int1Regs:$a)>;
def : Pat<(i64 (sext Int1Regs:$a)),
          (SELP_s64ii -1, 0, Int1Regs:$a)>;

// zext i1
def : Pat<(i16 (zext Int1Regs:$a)),
          (SELP_u16ii 1, 0, Int1Regs:$a)>;
def : Pat<(i32 (zext Int1Regs:$a)),
          (SELP_u32ii 1, 0, Int1Regs:$a)>;
def : Pat<(i64 (zext Int1Regs:$a)),
          (SELP_u64ii 1, 0, Int1Regs:$a)>;

// anyext i1
def : Pat<(i16 (anyext Int1Regs:$a)),
          (SELP_u16ii -1, 0, Int1Regs:$a)>;
def : Pat<(i32 (anyext Int1Regs:$a)),
          (SELP_u32ii -1, 0, Int1Regs:$a)>;
def : Pat<(i64 (anyext Int1Regs:$a)),
          (SELP_u64ii -1, 0, Int1Regs:$a)>;

// sext i16
def : Pat<(i32 (sext Int16Regs:$a)),
          (CVT_s32_s16 Int16Regs:$a, CvtNONE)>;
def : Pat<(i64 (sext Int16Regs:$a)),
          (CVT_s64_s16 Int16Regs:$a, CvtNONE)>;

// zext i16
def : Pat<(i32 (zext Int16Regs:$a)),
          (CVT_u32_u16 Int16Regs:$a, CvtNONE)>;
def : Pat<(i64 (zext Int16Regs:$a)),
          (CVT_u64_u16 Int16Regs:$a, CvtNONE)>;

// anyext i16
def : Pat<(i32 (anyext Int16Regs:$a)),
          (CVT_u32_u16 Int16Regs:$a, CvtNONE)>;
def : Pat<(i64 (anyext Int16Regs:$a)),
          (CVT_u64_u16 Int16Regs:$a, CvtNONE)>;

// sext i32
def : Pat<(i64 (sext Int32Regs:$a)),
          (CVT_s64_s32 Int32Regs:$a, CvtNONE)>;

// zext i32
def : Pat<(i64 (zext Int32Regs:$a)),
          (CVT_u64_u32 Int32Regs:$a, CvtNONE)>;

// anyext i32
def : Pat<(i64 (anyext Int32Regs:$a)),
          (CVT_u64_u32 Int32Regs:$a, CvtNONE)>;


// truncate i64
def : Pat<(i32 (trunc Int64Regs:$a)),
          (CVT_u32_u64 Int64Regs:$a, CvtNONE)>;
def : Pat<(i16 (trunc Int64Regs:$a)),
          (CVT_u16_u64 Int64Regs:$a, CvtNONE)>;
def : Pat<(i1 (trunc Int64Regs:$a)),
          (SETP_b64ri (ANDb64ri Int64Regs:$a, 1), 1, CmpEQ)>;

// truncate i32
def : Pat<(i16 (trunc Int32Regs:$a)),
          (CVT_u16_u32 Int32Regs:$a, CvtNONE)>;
def : Pat<(i1 (trunc Int32Regs:$a)),
          (SETP_b32ri (ANDb32ri Int32Regs:$a, 1), 1, CmpEQ)>;

// truncate i16
def : Pat<(i1 (trunc Int16Regs:$a)),
          (SETP_b16ri (ANDb16ri Int16Regs:$a, 1), 1, CmpEQ)>;

// sext_inreg
def : Pat<(sext_inreg Int16Regs:$a, i8), (CVT_INREG_s16_s8 Int16Regs:$a)>;
def : Pat<(sext_inreg Int32Regs:$a, i8), (CVT_INREG_s32_s8 Int32Regs:$a)>;
def : Pat<(sext_inreg Int32Regs:$a, i16), (CVT_INREG_s32_s16 Int32Regs:$a)>;
def : Pat<(sext_inreg Int64Regs:$a, i8), (CVT_INREG_s64_s8 Int64Regs:$a)>;
def : Pat<(sext_inreg Int64Regs:$a, i16), (CVT_INREG_s64_s16 Int64Regs:$a)>;
def : Pat<(sext_inreg Int64Regs:$a, i32), (CVT_INREG_s64_s32 Int64Regs:$a)>;


// Select instructions with 32-bit predicates
def : Pat<(select Int32Regs:$pred, Int16Regs:$a, Int16Regs:$b),
          (SELP_b16rr Int16Regs:$a, Int16Regs:$b,
          (SETP_b32ri (ANDb32ri Int32Regs:$pred, 1), 1, CmpEQ))>;
def : Pat<(select Int32Regs:$pred, Int32Regs:$a, Int32Regs:$b),
          (SELP_b32rr Int32Regs:$a, Int32Regs:$b,
          (SETP_b32ri (ANDb32ri Int32Regs:$pred, 1), 1, CmpEQ))>;
def : Pat<(select Int32Regs:$pred, Int64Regs:$a, Int64Regs:$b),
          (SELP_b64rr Int64Regs:$a, Int64Regs:$b,
          (SETP_b32ri (ANDb32ri Int32Regs:$pred, 1), 1, CmpEQ))>;
def : Pat<(select Int32Regs:$pred, Float32Regs:$a, Float32Regs:$b),
          (SELP_f32rr Float32Regs:$a, Float32Regs:$b,
          (SETP_b32ri (ANDb32ri Int32Regs:$pred, 1), 1, CmpEQ))>;
def : Pat<(select Int32Regs:$pred, Float64Regs:$a, Float64Regs:$b),
          (SELP_f64rr Float64Regs:$a, Float64Regs:$b,
          (SETP_b32ri (ANDb32ri Int32Regs:$pred, 1), 1, CmpEQ))>;


// pack a set of smaller int registers to a larger int register
def V4I16toI64 : NVPTXInst<(outs Int64Regs:$d),
                          (ins Int16Regs:$s1, Int16Regs:$s2,
                               Int16Regs:$s3, Int16Regs:$s4),
                          "mov.b64\t$d, {{$s1, $s2, $s3, $s4}};",
                          []>;
def V2I16toI32 : NVPTXInst<(outs Int32Regs:$d),
                          (ins Int16Regs:$s1, Int16Regs:$s2),
                          "mov.b32\t$d, {{$s1, $s2}};",
                          []>;
def V2I32toI64 : NVPTXInst<(outs Int64Regs:$d),
                          (ins Int32Regs:$s1, Int32Regs:$s2),
                          "mov.b64\t$d, {{$s1, $s2}};",
                          []>;
def V2F32toF64 : NVPTXInst<(outs Float64Regs:$d),
                          (ins Float32Regs:$s1, Float32Regs:$s2),
                          "mov.b64\t$d, {{$s1, $s2}};",
                          []>;

// unpack a larger int register to a set of smaller int registers
def I64toV4I16 : NVPTXInst<(outs Int16Regs:$d1, Int16Regs:$d2,
                                 Int16Regs:$d3, Int16Regs:$d4),
                           (ins Int64Regs:$s),
                           "mov.b64\t{{$d1, $d2, $d3, $d4}}, $s;",
                          []>;
def I32toV2I16 : NVPTXInst<(outs Int16Regs:$d1, Int16Regs:$d2),
                           (ins Int32Regs:$s),
                           "mov.b32\t{{$d1, $d2}}, $s;",
                          []>;
def I64toV2I32 : NVPTXInst<(outs Int32Regs:$d1, Int32Regs:$d2),
                           (ins Int64Regs:$s),
                           "mov.b64\t{{$d1, $d2}}, $s;",
                          []>;
def F64toV2F32 : NVPTXInst<(outs Float32Regs:$d1, Float32Regs:$d2),
                           (ins Float64Regs:$s),
                           "mov.b64\t{{$d1, $d2}}, $s;",
                          []>;

// Count leading zeros
def CLZr32 : NVPTXInst<(outs Int32Regs:$d), (ins Int32Regs:$a),
                       "clz.b32\t$d, $a;",
                       []>;
def CLZr64 : NVPTXInst<(outs Int32Regs:$d), (ins Int64Regs:$a),
                       "clz.b64\t$d, $a;",
                       []>;

// 32-bit has a direct PTX instruction
def : Pat<(ctlz Int32Regs:$a),
          (CLZr32 Int32Regs:$a)>;
def : Pat<(ctlz_zero_undef Int32Regs:$a),
          (CLZr32 Int32Regs:$a)>;

// For 64-bit, the result in PTX is actually 32-bit so we zero-extend
// to 64-bit to match the LLVM semantics
def : Pat<(ctlz Int64Regs:$a),
          (CVT_u64_u32 (CLZr64 Int64Regs:$a), CvtNONE)>;
def : Pat<(ctlz_zero_undef Int64Regs:$a),
          (CVT_u64_u32 (CLZr64 Int64Regs:$a), CvtNONE)>;

// For 16-bit, we zero-extend to 32-bit, then trunc the result back
// to 16-bits (ctlz of a 16-bit value is guaranteed to require less
// than 16 bits to store). We also need to subtract 16 because the
// high-order 16 zeros were counted.
def : Pat<(ctlz Int16Regs:$a),
          (SUBi16ri (CVT_u16_u32 (CLZr32
            (CVT_u32_u16 Int16Regs:$a, CvtNONE)),
           CvtNONE), 16)>;
def : Pat<(ctlz_zero_undef Int16Regs:$a),
          (SUBi16ri (CVT_u16_u32 (CLZr32
            (CVT_u32_u16 Int16Regs:$a, CvtNONE)),
           CvtNONE), 16)>;

// Population count
def POPCr32 : NVPTXInst<(outs Int32Regs:$d), (ins Int32Regs:$a),
                        "popc.b32\t$d, $a;",
                        []>;
def POPCr64 : NVPTXInst<(outs Int32Regs:$d), (ins Int64Regs:$a),
                        "popc.b64\t$d, $a;",
                        []>;

// 32-bit has a direct PTX instruction
def : Pat<(ctpop Int32Regs:$a),
          (POPCr32 Int32Regs:$a)>;

// For 64-bit, the result in PTX is actually 32-bit so we zero-extend
// to 64-bit to match the LLVM semantics
def : Pat<(ctpop Int64Regs:$a),
          (CVT_u64_u32 (POPCr64 Int64Regs:$a), CvtNONE)>;

// For 16-bit, we zero-extend to 32-bit, then trunc the result back
// to 16-bits (ctpop of a 16-bit value is guaranteed to require less
// than 16 bits to store)
def : Pat<(ctpop Int16Regs:$a),
          (CVT_u16_u32 (POPCr32 (CVT_u32_u16 Int16Regs:$a, CvtNONE)),
           CvtNONE)>;

// fround f64 -> f32
def : Pat<(f32 (fround Float64Regs:$a)),
          (CVT_f32_f64 Float64Regs:$a, CvtRN_FTZ)>, Requires<[doF32FTZ]>;
def : Pat<(f32 (fround Float64Regs:$a)),
          (CVT_f32_f64 Float64Regs:$a, CvtRN)>;

// fextend f32 -> f64
def : Pat<(f64 (fextend Float32Regs:$a)),
          (CVT_f64_f32 Float32Regs:$a, CvtNONE_FTZ)>, Requires<[doF32FTZ]>;
def : Pat<(f64 (fextend Float32Regs:$a)),
          (CVT_f64_f32 Float32Regs:$a, CvtNONE)>;

def retflag       : SDNode<"NVPTXISD::RET_FLAG", SDTNone,
                           [SDNPHasChain, SDNPOptInGlue]>;

//-----------------------------------
// Control-flow
//-----------------------------------

let isTerminator=1 in {
   let isReturn=1, isBarrier=1 in
      def Return : NVPTXInst<(outs), (ins), "ret;", [(retflag)]>;

   let isBranch=1 in
      def CBranch : NVPTXInst<(outs), (ins Int1Regs:$a, brtarget:$target),
                          "@$a bra \t$target;",
                           [(brcond Int1Regs:$a, bb:$target)]>;
   let isBranch=1 in
      def CBranchOther : NVPTXInst<(outs), (ins Int1Regs:$a, brtarget:$target),
                          "@!$a bra \t$target;",
                           []>;

   let isBranch=1, isBarrier=1 in
      def GOTO : NVPTXInst<(outs), (ins brtarget:$target),
                        "bra.uni \t$target;",
                  [(br bb:$target)]>;
}

def : Pat<(brcond Int32Regs:$a, bb:$target),
          (CBranch (SETP_u32ri Int32Regs:$a, 0, CmpNE), bb:$target)>;

// SelectionDAGBuilder::visitSWitchCase() will invert the condition of a
// conditional branch if
// the target block is the next block so that the code can fall through to the
// target block.
// The invertion is done by 'xor condition, 1', which will be translated to
// (setne condition, -1).
// Since ptx supports '@!pred bra target', we should use it.
def : Pat<(brcond (i1 (setne Int1Regs:$a, -1)), bb:$target),
  (CBranchOther Int1Regs:$a, bb:$target)>;

// Call
def SDT_NVPTXCallSeqStart : SDCallSeqStart<[ SDTCisVT<0, i32> ]>;
def SDT_NVPTXCallSeqEnd   : SDCallSeqEnd<[ SDTCisVT<0, i32>,
                                        SDTCisVT<1, i32> ]>;

def callseq_start : SDNode<"ISD::CALLSEQ_START", SDT_NVPTXCallSeqStart,
                           [SDNPHasChain, SDNPOutGlue, SDNPSideEffect]>;
def callseq_end   : SDNode<"ISD::CALLSEQ_END",   SDT_NVPTXCallSeqEnd,
                           [SDNPHasChain, SDNPOptInGlue, SDNPOutGlue,
                           SDNPSideEffect]>;

def SDT_NVPTXCall : SDTypeProfile<0, 1, [SDTCisVT<0, i32>]>;
def call          : SDNode<"NVPTXISD::CALL", SDT_NVPTXCall,
                           [SDNPHasChain, SDNPOptInGlue, SDNPOutGlue]>;
def calltarget : Operand<i32>;
let isCall=1 in {
   def CALL : NVPTXInst<(outs), (ins calltarget:$dst),
                  "call \t$dst, (1);", []>;
}

def : Pat<(call tglobaladdr:$dst),
          (CALL tglobaladdr:$dst)>;
def : Pat<(call texternalsym:$dst),
          (CALL texternalsym:$dst)>;

// Pseudo instructions.
class Pseudo<dag outs, dag ins, string asmstr, list<dag> pattern>
   : NVPTXInst<outs, ins, asmstr, pattern>;

// @TODO: We use some tricks here to emit curly braces.  Can we clean this up
// a bit without TableGen modifications?
def Callseq_Start : NVPTXInst<(outs), (ins i32imm:$amt),
  "// Callseq Start $amt\n\t{{\n\t.reg .b32 temp_param_reg;\n\t// <end>}}",
                               [(callseq_start timm:$amt)]>;
def Callseq_End : NVPTXInst<(outs), (ins i32imm:$amt1, i32imm:$amt2),
  "\n\t//{{\n\t}}// Callseq End $amt1",
                            [(callseq_end timm:$amt1, timm:$amt2)]>;

// trap instruction

def trapinst : NVPTXInst<(outs), (ins),
                         "trap;",
                         [(trap)]>;

// Call prototype wrapper
def SDTCallPrototype : SDTypeProfile<0, 1, [SDTCisInt<0>]>;
def CallPrototype
  : SDNode<"NVPTXISD::CallPrototype", SDTCallPrototype,
           [SDNPHasChain, SDNPOutGlue, SDNPInGlue, SDNPSideEffect]>;
def ProtoIdent : Operand<i32> {
  let PrintMethod = "printProtoIdent";
}
def CALL_PROTOTYPE
  : NVPTXInst<(outs), (ins ProtoIdent:$ident),
              "$ident", [(CallPrototype (i32 texternalsym:$ident))]>;


include "NVPTXIntrinsics.td"


//-----------------------------------
// Notes
//-----------------------------------
// BSWAP is currently expanded. The following is a more efficient
// - for < sm_20, use vector scalar mov, as tesla support native 16-bit register
// - for sm_20, use pmpt (use vector scalar mov to get the pack and
//   unpack). sm_20 supports native 32-bit register, but not native 16-bit
// register.