blob: 1b9859b5779096605fe814b87687552694bd5b36 [file] [log] [blame]
//===- LoopDistribute.cpp - Loop Distribution Pass ------------------------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file implements the Loop Distribution Pass. Its main focus is to
// distribute loops that cannot be vectorized due to dependence cycles. It
// tries to isolate the offending dependences into a new loop allowing
// vectorization of the remaining parts.
//
// For dependence analysis, the pass uses the LoopVectorizer's
// LoopAccessAnalysis. Because this analysis presumes no change in the order of
// memory operations, special care is taken to preserve the lexical order of
// these operations.
//
// Similarly to the Vectorizer, the pass also supports loop versioning to
// run-time disambiguate potentially overlapping arrays.
//
//===----------------------------------------------------------------------===//
#include "llvm/ADT/DepthFirstIterator.h"
#include "llvm/ADT/EquivalenceClasses.h"
#include "llvm/ADT/STLExtras.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/Analysis/LoopAccessAnalysis.h"
#include "llvm/Analysis/LoopInfo.h"
#include "llvm/IR/Dominators.h"
#include "llvm/Pass.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
#include "llvm/Transforms/Utils/BasicBlockUtils.h"
#include "llvm/Transforms/Utils/Cloning.h"
#include "llvm/Transforms/Utils/LoopVersioning.h"
#include <list>
#define LDIST_NAME "loop-distribute"
#define DEBUG_TYPE LDIST_NAME
using namespace llvm;
static cl::opt<bool>
LDistVerify("loop-distribute-verify", cl::Hidden,
cl::desc("Turn on DominatorTree and LoopInfo verification "
"after Loop Distribution"),
cl::init(false));
static cl::opt<bool> DistributeNonIfConvertible(
"loop-distribute-non-if-convertible", cl::Hidden,
cl::desc("Whether to distribute into a loop that may not be "
"if-convertible by the loop vectorizer"),
cl::init(false));
STATISTIC(NumLoopsDistributed, "Number of loops distributed");
namespace {
/// \brief Maintains the set of instructions of the loop for a partition before
/// cloning. After cloning, it hosts the new loop.
class InstPartition {
typedef SmallPtrSet<Instruction *, 8> InstructionSet;
public:
InstPartition(Instruction *I, Loop *L, bool DepCycle = false)
: DepCycle(DepCycle), OrigLoop(L), ClonedLoop(nullptr) {
Set.insert(I);
}
/// \brief Returns whether this partition contains a dependence cycle.
bool hasDepCycle() const { return DepCycle; }
/// \brief Adds an instruction to this partition.
void add(Instruction *I) { Set.insert(I); }
/// \brief Collection accessors.
InstructionSet::iterator begin() { return Set.begin(); }
InstructionSet::iterator end() { return Set.end(); }
InstructionSet::const_iterator begin() const { return Set.begin(); }
InstructionSet::const_iterator end() const { return Set.end(); }
bool empty() const { return Set.empty(); }
/// \brief Moves this partition into \p Other. This partition becomes empty
/// after this.
void moveTo(InstPartition &Other) {
Other.Set.insert(Set.begin(), Set.end());
Set.clear();
Other.DepCycle |= DepCycle;
}
/// \brief Populates the partition with a transitive closure of all the
/// instructions that the seeded instructions dependent on.
void populateUsedSet() {
// FIXME: We currently don't use control-dependence but simply include all
// blocks (possibly empty at the end) and let simplifycfg mostly clean this
// up.
for (auto *B : OrigLoop->getBlocks())
Set.insert(B->getTerminator());
// Follow the use-def chains to form a transitive closure of all the
// instructions that the originally seeded instructions depend on.
SmallVector<Instruction *, 8> Worklist(Set.begin(), Set.end());
while (!Worklist.empty()) {
Instruction *I = Worklist.pop_back_val();
// Insert instructions from the loop that we depend on.
for (Value *V : I->operand_values()) {
auto *I = dyn_cast<Instruction>(V);
if (I && OrigLoop->contains(I->getParent()) && Set.insert(I).second)
Worklist.push_back(I);
}
}
}
/// \brief Clones the original loop.
///
/// Updates LoopInfo and DominatorTree using the information that block \p
/// LoopDomBB dominates the loop.
Loop *cloneLoopWithPreheader(BasicBlock *InsertBefore, BasicBlock *LoopDomBB,
unsigned Index, LoopInfo *LI,
DominatorTree *DT) {
ClonedLoop = ::cloneLoopWithPreheader(InsertBefore, LoopDomBB, OrigLoop,
VMap, Twine(".ldist") + Twine(Index),
LI, DT, ClonedLoopBlocks);
return ClonedLoop;
}
/// \brief The cloned loop. If this partition is mapped to the original loop,
/// this is null.
const Loop *getClonedLoop() const { return ClonedLoop; }
/// \brief Returns the loop where this partition ends up after distribution.
/// If this partition is mapped to the original loop then use the block from
/// the loop.
const Loop *getDistributedLoop() const {
return ClonedLoop ? ClonedLoop : OrigLoop;
}
/// \brief The VMap that is populated by cloning and then used in
/// remapinstruction to remap the cloned instructions.
ValueToValueMapTy &getVMap() { return VMap; }
/// \brief Remaps the cloned instructions using VMap.
void remapInstructions() {
remapInstructionsInBlocks(ClonedLoopBlocks, VMap);
}
/// \brief Based on the set of instructions selected for this partition,
/// removes the unnecessary ones.
void removeUnusedInsts() {
SmallVector<Instruction *, 8> Unused;
for (auto *Block : OrigLoop->getBlocks())
for (auto &Inst : *Block)
if (!Set.count(&Inst)) {
Instruction *NewInst = &Inst;
if (!VMap.empty())
NewInst = cast<Instruction>(VMap[NewInst]);
assert(!isa<BranchInst>(NewInst) &&
"Branches are marked used early on");
Unused.push_back(NewInst);
}
// Delete the instructions backwards, as it has a reduced likelihood of
// having to update as many def-use and use-def chains.
for (auto I = Unused.rbegin(), E = Unused.rend(); I != E; ++I) {
auto *Inst = *I;
if (!Inst->use_empty())
Inst->replaceAllUsesWith(UndefValue::get(Inst->getType()));
Inst->eraseFromParent();
}
}
void print() const {
if (DepCycle)
dbgs() << " (cycle)\n";
for (auto *I : Set)
// Prefix with the block name.
dbgs() << " " << I->getParent()->getName() << ":" << *I << "\n";
}
void printBlocks() const {
for (auto *BB : getDistributedLoop()->getBlocks())
dbgs() << *BB;
}
private:
/// \brief Instructions from OrigLoop selected for this partition.
InstructionSet Set;
/// \brief Whether this partition contains a dependence cycle.
bool DepCycle;
/// \brief The original loop.
Loop *OrigLoop;
/// \brief The cloned loop. If this partition is mapped to the original loop,
/// this is null.
Loop *ClonedLoop;
/// \brief The blocks of ClonedLoop including the preheader. If this
/// partition is mapped to the original loop, this is empty.
SmallVector<BasicBlock *, 8> ClonedLoopBlocks;
/// \brief These gets populated once the set of instructions have been
/// finalized. If this partition is mapped to the original loop, these are not
/// set.
ValueToValueMapTy VMap;
};
/// \brief Holds the set of Partitions. It populates them, merges them and then
/// clones the loops.
class InstPartitionContainer {
typedef DenseMap<Instruction *, int> InstToPartitionIdT;
public:
InstPartitionContainer(Loop *L, LoopInfo *LI, DominatorTree *DT)
: L(L), LI(LI), DT(DT) {}
/// \brief Returns the number of partitions.
unsigned getSize() const { return PartitionContainer.size(); }
/// \brief Adds \p Inst into the current partition if that is marked to
/// contain cycles. Otherwise start a new partition for it.
void addToCyclicPartition(Instruction *Inst) {
// If the current partition is non-cyclic. Start a new one.
if (PartitionContainer.empty() || !PartitionContainer.back().hasDepCycle())
PartitionContainer.emplace_back(Inst, L, /*DepCycle=*/true);
else
PartitionContainer.back().add(Inst);
}
/// \brief Adds \p Inst into a partition that is not marked to contain
/// dependence cycles.
///
// Initially we isolate memory instructions into as many partitions as
// possible, then later we may merge them back together.
void addToNewNonCyclicPartition(Instruction *Inst) {
PartitionContainer.emplace_back(Inst, L);
}
/// \brief Merges adjacent non-cyclic partitions.
///
/// The idea is that we currently only want to isolate the non-vectorizable
/// partition. We could later allow more distribution among these partition
/// too.
void mergeAdjacentNonCyclic() {
mergeAdjacentPartitionsIf(
[](const InstPartition *P) { return !P->hasDepCycle(); });
}
/// \brief If a partition contains only conditional stores, we won't vectorize
/// it. Try to merge it with a previous cyclic partition.
void mergeNonIfConvertible() {
mergeAdjacentPartitionsIf([&](const InstPartition *Partition) {
if (Partition->hasDepCycle())
return true;
// Now, check if all stores are conditional in this partition.
bool seenStore = false;
for (auto *Inst : *Partition)
if (isa<StoreInst>(Inst)) {
seenStore = true;
if (!LoopAccessInfo::blockNeedsPredication(Inst->getParent(), L, DT))
return false;
}
return seenStore;
});
}
/// \brief Merges the partitions according to various heuristics.
void mergeBeforePopulating() {
mergeAdjacentNonCyclic();
if (!DistributeNonIfConvertible)
mergeNonIfConvertible();
}
/// \brief Merges partitions in order to ensure that no loads are duplicated.
///
/// We can't duplicate loads because that could potentially reorder them.
/// LoopAccessAnalysis provides dependency information with the context that
/// the order of memory operation is preserved.
///
/// Return if any partitions were merged.
bool mergeToAvoidDuplicatedLoads() {
typedef DenseMap<Instruction *, InstPartition *> LoadToPartitionT;
typedef EquivalenceClasses<InstPartition *> ToBeMergedT;
LoadToPartitionT LoadToPartition;
ToBeMergedT ToBeMerged;
// Step through the partitions and create equivalence between partitions
// that contain the same load. Also put partitions in between them in the
// same equivalence class to avoid reordering of memory operations.
for (PartitionContainerT::iterator I = PartitionContainer.begin(),
E = PartitionContainer.end();
I != E; ++I) {
auto *PartI = &*I;
// If a load occurs in two partitions PartI and PartJ, merge all
// partitions (PartI, PartJ] into PartI.
for (Instruction *Inst : *PartI)
if (isa<LoadInst>(Inst)) {
bool NewElt;
LoadToPartitionT::iterator LoadToPart;
std::tie(LoadToPart, NewElt) =
LoadToPartition.insert(std::make_pair(Inst, PartI));
if (!NewElt) {
DEBUG(dbgs() << "Merging partitions due to this load in multiple "
<< "partitions: " << PartI << ", "
<< LoadToPart->second << "\n" << *Inst << "\n");
auto PartJ = I;
do {
--PartJ;
ToBeMerged.unionSets(PartI, &*PartJ);
} while (&*PartJ != LoadToPart->second);
}
}
}
if (ToBeMerged.empty())
return false;
// Merge the member of an equivalence class into its class leader. This
// makes the members empty.
for (ToBeMergedT::iterator I = ToBeMerged.begin(), E = ToBeMerged.end();
I != E; ++I) {
if (!I->isLeader())
continue;
auto PartI = I->getData();
for (auto PartJ : make_range(std::next(ToBeMerged.member_begin(I)),
ToBeMerged.member_end())) {
PartJ->moveTo(*PartI);
}
}
// Remove the empty partitions.
PartitionContainer.remove_if(
[](const InstPartition &P) { return P.empty(); });
return true;
}
/// \brief Sets up the mapping between instructions to partitions. If the
/// instruction is duplicated across multiple partitions, set the entry to -1.
void setupPartitionIdOnInstructions() {
int PartitionID = 0;
for (const auto &Partition : PartitionContainer) {
for (Instruction *Inst : Partition) {
bool NewElt;
InstToPartitionIdT::iterator Iter;
std::tie(Iter, NewElt) =
InstToPartitionId.insert(std::make_pair(Inst, PartitionID));
if (!NewElt)
Iter->second = -1;
}
++PartitionID;
}
}
/// \brief Populates the partition with everything that the seeding
/// instructions require.
void populateUsedSet() {
for (auto &P : PartitionContainer)
P.populateUsedSet();
}
/// \brief This performs the main chunk of the work of cloning the loops for
/// the partitions.
void cloneLoops(Pass *P) {
BasicBlock *OrigPH = L->getLoopPreheader();
// At this point the predecessor of the preheader is either the memcheck
// block or the top part of the original preheader.
BasicBlock *Pred = OrigPH->getSinglePredecessor();
assert(Pred && "Preheader does not have a single predecessor");
BasicBlock *ExitBlock = L->getExitBlock();
assert(ExitBlock && "No single exit block");
Loop *NewLoop;
assert(!PartitionContainer.empty() && "at least two partitions expected");
// We're cloning the preheader along with the loop so we already made sure
// it was empty.
assert(&*OrigPH->begin() == OrigPH->getTerminator() &&
"preheader not empty");
// Create a loop for each partition except the last. Clone the original
// loop before PH along with adding a preheader for the cloned loop. Then
// update PH to point to the newly added preheader.
BasicBlock *TopPH = OrigPH;
unsigned Index = getSize() - 1;
for (auto I = std::next(PartitionContainer.rbegin()),
E = PartitionContainer.rend();
I != E; ++I, --Index, TopPH = NewLoop->getLoopPreheader()) {
auto *Part = &*I;
NewLoop = Part->cloneLoopWithPreheader(TopPH, Pred, Index, LI, DT);
Part->getVMap()[ExitBlock] = TopPH;
Part->remapInstructions();
}
Pred->getTerminator()->replaceUsesOfWith(OrigPH, TopPH);
// Now go in forward order and update the immediate dominator for the
// preheaders with the exiting block of the previous loop. Dominance
// within the loop is updated in cloneLoopWithPreheader.
for (auto Curr = PartitionContainer.cbegin(),
Next = std::next(PartitionContainer.cbegin()),
E = PartitionContainer.cend();
Next != E; ++Curr, ++Next)
DT->changeImmediateDominator(
Next->getDistributedLoop()->getLoopPreheader(),
Curr->getDistributedLoop()->getExitingBlock());
}
/// \brief Removes the dead instructions from the cloned loops.
void removeUnusedInsts() {
for (auto &Partition : PartitionContainer)
Partition.removeUnusedInsts();
}
/// \brief For each memory pointer, it computes the partitionId the pointer is
/// used in.
///
/// This returns an array of int where the I-th entry corresponds to I-th
/// entry in LAI.getRuntimePointerCheck(). If the pointer is used in multiple
/// partitions its entry is set to -1.
SmallVector<int, 8>
computePartitionSetForPointers(const LoopAccessInfo &LAI) {
const RuntimePointerChecking *RtPtrCheck = LAI.getRuntimePointerChecking();
unsigned N = RtPtrCheck->Pointers.size();
SmallVector<int, 8> PtrToPartitions(N);
for (unsigned I = 0; I < N; ++I) {
Value *Ptr = RtPtrCheck->Pointers[I].PointerValue;
auto Instructions =
LAI.getInstructionsForAccess(Ptr, RtPtrCheck->Pointers[I].IsWritePtr);
int &Partition = PtrToPartitions[I];
// First set it to uninitialized.
Partition = -2;
for (Instruction *Inst : Instructions) {
// Note that this could be -1 if Inst is duplicated across multiple
// partitions.
int ThisPartition = this->InstToPartitionId[Inst];
if (Partition == -2)
Partition = ThisPartition;
// -1 means belonging to multiple partitions.
else if (Partition == -1)
break;
else if (Partition != (int)ThisPartition)
Partition = -1;
}
assert(Partition != -2 && "Pointer not belonging to any partition");
}
return PtrToPartitions;
}
void print(raw_ostream &OS) const {
unsigned Index = 0;
for (const auto &P : PartitionContainer) {
OS << "Partition " << Index++ << " (" << &P << "):\n";
P.print();
}
}
void dump() const { print(dbgs()); }
#ifndef NDEBUG
friend raw_ostream &operator<<(raw_ostream &OS,
const InstPartitionContainer &Partitions) {
Partitions.print(OS);
return OS;
}
#endif
void printBlocks() const {
unsigned Index = 0;
for (const auto &P : PartitionContainer) {
dbgs() << "\nPartition " << Index++ << " (" << &P << "):\n";
P.printBlocks();
}
}
private:
typedef std::list<InstPartition> PartitionContainerT;
/// \brief List of partitions.
PartitionContainerT PartitionContainer;
/// \brief Mapping from Instruction to partition Id. If the instruction
/// belongs to multiple partitions the entry contains -1.
InstToPartitionIdT InstToPartitionId;
Loop *L;
LoopInfo *LI;
DominatorTree *DT;
/// \brief The control structure to merge adjacent partitions if both satisfy
/// the \p Predicate.
template <class UnaryPredicate>
void mergeAdjacentPartitionsIf(UnaryPredicate Predicate) {
InstPartition *PrevMatch = nullptr;
for (auto I = PartitionContainer.begin(); I != PartitionContainer.end();) {
auto DoesMatch = Predicate(&*I);
if (PrevMatch == nullptr && DoesMatch) {
PrevMatch = &*I;
++I;
} else if (PrevMatch != nullptr && DoesMatch) {
I->moveTo(*PrevMatch);
I = PartitionContainer.erase(I);
} else {
PrevMatch = nullptr;
++I;
}
}
}
};
/// \brief For each memory instruction, this class maintains difference of the
/// number of unsafe dependences that start out from this instruction minus
/// those that end here.
///
/// By traversing the memory instructions in program order and accumulating this
/// number, we know whether any unsafe dependence crosses over a program point.
class MemoryInstructionDependences {
typedef MemoryDepChecker::Dependence Dependence;
public:
struct Entry {
Instruction *Inst;
unsigned NumUnsafeDependencesStartOrEnd;
Entry(Instruction *Inst) : Inst(Inst), NumUnsafeDependencesStartOrEnd(0) {}
};
typedef SmallVector<Entry, 8> AccessesType;
AccessesType::const_iterator begin() const { return Accesses.begin(); }
AccessesType::const_iterator end() const { return Accesses.end(); }
MemoryInstructionDependences(
const SmallVectorImpl<Instruction *> &Instructions,
const SmallVectorImpl<Dependence> &InterestingDependences) {
Accesses.append(Instructions.begin(), Instructions.end());
DEBUG(dbgs() << "Backward dependences:\n");
for (auto &Dep : InterestingDependences)
if (Dep.isPossiblyBackward()) {
// Note that the designations source and destination follow the program
// order, i.e. source is always first. (The direction is given by the
// DepType.)
++Accesses[Dep.Source].NumUnsafeDependencesStartOrEnd;
--Accesses[Dep.Destination].NumUnsafeDependencesStartOrEnd;
DEBUG(Dep.print(dbgs(), 2, Instructions));
}
}
private:
AccessesType Accesses;
};
/// \brief Returns the instructions that use values defined in the loop.
static SmallVector<Instruction *, 8> findDefsUsedOutsideOfLoop(Loop *L) {
SmallVector<Instruction *, 8> UsedOutside;
for (auto *Block : L->getBlocks())
// FIXME: I believe that this could use copy_if if the Inst reference could
// be adapted into a pointer.
for (auto &Inst : *Block) {
auto Users = Inst.users();
if (std::any_of(Users.begin(), Users.end(), [&](User *U) {
auto *Use = cast<Instruction>(U);
return !L->contains(Use->getParent());
}))
UsedOutside.push_back(&Inst);
}
return UsedOutside;
}
/// \brief The pass class.
class LoopDistribute : public FunctionPass {
public:
LoopDistribute() : FunctionPass(ID) {
initializeLoopDistributePass(*PassRegistry::getPassRegistry());
}
bool runOnFunction(Function &F) override {
LI = &getAnalysis<LoopInfoWrapperPass>().getLoopInfo();
LAA = &getAnalysis<LoopAccessAnalysis>();
DT = &getAnalysis<DominatorTreeWrapperPass>().getDomTree();
// Build up a worklist of inner-loops to vectorize. This is necessary as the
// act of distributing a loop creates new loops and can invalidate iterators
// across the loops.
SmallVector<Loop *, 8> Worklist;
for (Loop *TopLevelLoop : *LI)
for (Loop *L : depth_first(TopLevelLoop))
// We only handle inner-most loops.
if (L->empty())
Worklist.push_back(L);
// Now walk the identified inner loops.
bool Changed = false;
for (Loop *L : Worklist)
Changed |= processLoop(L);
// Process each loop nest in the function.
return Changed;
}
void getAnalysisUsage(AnalysisUsage &AU) const override {
AU.addRequired<LoopInfoWrapperPass>();
AU.addPreserved<LoopInfoWrapperPass>();
AU.addRequired<LoopAccessAnalysis>();
AU.addRequired<DominatorTreeWrapperPass>();
AU.addPreserved<DominatorTreeWrapperPass>();
}
static char ID;
private:
/// \brief Try to distribute an inner-most loop.
bool processLoop(Loop *L) {
assert(L->empty() && "Only process inner loops.");
DEBUG(dbgs() << "\nLDist: In \"" << L->getHeader()->getParent()->getName()
<< "\" checking " << *L << "\n");
BasicBlock *PH = L->getLoopPreheader();
if (!PH) {
DEBUG(dbgs() << "Skipping; no preheader");
return false;
}
if (!L->getExitBlock()) {
DEBUG(dbgs() << "Skipping; multiple exit blocks");
return false;
}
// LAA will check that we only have a single exiting block.
const LoopAccessInfo &LAI = LAA->getInfo(L, ValueToValueMap());
// Currently, we only distribute to isolate the part of the loop with
// dependence cycles to enable partial vectorization.
if (LAI.canVectorizeMemory()) {
DEBUG(dbgs() << "Skipping; memory operations are safe for vectorization");
return false;
}
auto *InterestingDependences =
LAI.getDepChecker().getInterestingDependences();
if (!InterestingDependences || InterestingDependences->empty()) {
DEBUG(dbgs() << "Skipping; No unsafe dependences to isolate");
return false;
}
InstPartitionContainer Partitions(L, LI, DT);
// First, go through each memory operation and assign them to consecutive
// partitions (the order of partitions follows program order). Put those
// with unsafe dependences into "cyclic" partition otherwise put each store
// in its own "non-cyclic" partition (we'll merge these later).
//
// Note that a memory operation (e.g. Load2 below) at a program point that
// has an unsafe dependence (Store3->Load1) spanning over it must be
// included in the same cyclic partition as the dependent operations. This
// is to preserve the original program order after distribution. E.g.:
//
// NumUnsafeDependencesStartOrEnd NumUnsafeDependencesActive
// Load1 -. 1 0->1
// Load2 | /Unsafe/ 0 1
// Store3 -' -1 1->0
// Load4 0 0
//
// NumUnsafeDependencesActive > 0 indicates this situation and in this case
// we just keep assigning to the same cyclic partition until
// NumUnsafeDependencesActive reaches 0.
const MemoryDepChecker &DepChecker = LAI.getDepChecker();
MemoryInstructionDependences MID(DepChecker.getMemoryInstructions(),
*InterestingDependences);
int NumUnsafeDependencesActive = 0;
for (auto &InstDep : MID) {
Instruction *I = InstDep.Inst;
// We update NumUnsafeDependencesActive post-instruction, catch the
// start of a dependence directly via NumUnsafeDependencesStartOrEnd.
if (NumUnsafeDependencesActive ||
InstDep.NumUnsafeDependencesStartOrEnd > 0)
Partitions.addToCyclicPartition(I);
else
Partitions.addToNewNonCyclicPartition(I);
NumUnsafeDependencesActive += InstDep.NumUnsafeDependencesStartOrEnd;
assert(NumUnsafeDependencesActive >= 0 &&
"Negative number of dependences active");
}
// Add partitions for values used outside. These partitions can be out of
// order from the original program order. This is OK because if the
// partition uses a load we will merge this partition with the original
// partition of the load that we set up in the previous loop (see
// mergeToAvoidDuplicatedLoads).
auto DefsUsedOutside = findDefsUsedOutsideOfLoop(L);
for (auto *Inst : DefsUsedOutside)
Partitions.addToNewNonCyclicPartition(Inst);
DEBUG(dbgs() << "Seeded partitions:\n" << Partitions);
if (Partitions.getSize() < 2)
return false;
// Run the merge heuristics: Merge non-cyclic adjacent partitions since we
// should be able to vectorize these together.
Partitions.mergeBeforePopulating();
DEBUG(dbgs() << "\nMerged partitions:\n" << Partitions);
if (Partitions.getSize() < 2)
return false;
// Now, populate the partitions with non-memory operations.
Partitions.populateUsedSet();
DEBUG(dbgs() << "\nPopulated partitions:\n" << Partitions);
// In order to preserve original lexical order for loads, keep them in the
// partition that we set up in the MemoryInstructionDependences loop.
if (Partitions.mergeToAvoidDuplicatedLoads()) {
DEBUG(dbgs() << "\nPartitions merged to ensure unique loads:\n"
<< Partitions);
if (Partitions.getSize() < 2)
return false;
}
DEBUG(dbgs() << "\nDistributing loop: " << *L << "\n");
// We're done forming the partitions set up the reverse mapping from
// instructions to partitions.
Partitions.setupPartitionIdOnInstructions();
// To keep things simple have an empty preheader before we version or clone
// the loop. (Also split if this has no predecessor, i.e. entry, because we
// rely on PH having a predecessor.)
if (!PH->getSinglePredecessor() || &*PH->begin() != PH->getTerminator())
SplitBlock(PH, PH->getTerminator(), DT, LI);
// If we need run-time checks to disambiguate pointers are run-time, version
// the loop now.
auto PtrToPartition = Partitions.computePartitionSetForPointers(LAI);
LoopVersioning LVer(LAI, L, LI, DT, &PtrToPartition);
if (LVer.needsRuntimeChecks()) {
DEBUG(dbgs() << "\nPointers:\n");
DEBUG(LAI.getRuntimePointerChecking()->print(dbgs(), 0, &PtrToPartition));
LVer.versionLoop(this);
LVer.addPHINodes(DefsUsedOutside);
}
// Create identical copies of the original loop for each partition and hook
// them up sequentially.
Partitions.cloneLoops(this);
// Now, we remove the instruction from each loop that don't belong to that
// partition.
Partitions.removeUnusedInsts();
DEBUG(dbgs() << "\nAfter removing unused Instrs:\n");
DEBUG(Partitions.printBlocks());
if (LDistVerify) {
LI->verify();
DT->verifyDomTree();
}
++NumLoopsDistributed;
return true;
}
// Analyses used.
LoopInfo *LI;
LoopAccessAnalysis *LAA;
DominatorTree *DT;
};
} // anonymous namespace
char LoopDistribute::ID;
static const char ldist_name[] = "Loop Distribition";
INITIALIZE_PASS_BEGIN(LoopDistribute, LDIST_NAME, ldist_name, false, false)
INITIALIZE_PASS_DEPENDENCY(LoopInfoWrapperPass)
INITIALIZE_PASS_DEPENDENCY(LoopAccessAnalysis)
INITIALIZE_PASS_DEPENDENCY(DominatorTreeWrapperPass)
INITIALIZE_PASS_END(LoopDistribute, LDIST_NAME, ldist_name, false, false)
namespace llvm {
FunctionPass *createLoopDistributePass() { return new LoopDistribute(); }
}