| .section .debug_line,"",@progbits |
| # Leading good section |
| .long .Lunit1_end - .Lunit1_start # Length of Unit (DWARF-32 format) |
| .Lunit1_start: |
| .short 4 # DWARF version number |
| .long .Lprologue1_end-.Lprologue1_start # Length of Prologue |
| .Lprologue1_start: |
| .byte 1 # Minimum Instruction Length |
| .byte 1 # Maximum Operations per Instruction |
| .byte 1 # Default is_stmt |
| .byte -5 # Line Base |
| .byte 14 # Line Range |
| .byte 13 # Opcode Base |
| .byte 0, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1 # Standard Opcode Lengths |
| .asciz "dir1" # Include table |
| .asciz "dir2" |
| .byte 0 |
| .asciz "file1" # File table |
| .byte 0, 0, 0 |
| .asciz "file2" |
| .byte 1, 0, 0 |
| .byte 0 |
| .Lprologue1_end: |
| .byte 0, 9, 2 # DW_LNE_set_address |
| .quad 0x0badbeef |
| .byte 0, 1, 1 # DW_LNE_end_sequence |
| .Lunit1_end: |
| |
| # version 0 |
| .long .Lunit_v0_end - .Lunit_v0_start # unit length |
| .Lunit_v0_start: |
| .short 0 # version |
| .Lunit_v0_end: |
| |
| # version 1 |
| .long .Lunit_v1_end - .Lunit_v1_start # unit length |
| .Lunit_v1_start: |
| .short 1 # version |
| .Lunit_v1_end: |
| |
| # version 5 malformed line/include table |
| .long .Lunit_v5_end - .Lunit_v5_start # unit length |
| .Lunit_v5_start: |
| .short 5 # version |
| .byte 8 # address size |
| .byte 8 # segment selector |
| .long .Lprologue_v5_end-.Lprologue_v5_start # Length of Prologue |
| .Lprologue_v5_start: |
| .byte 1 # Minimum Instruction Length |
| .byte 1 # Maximum Operations per Instruction |
| .byte 1 # Default is_stmt |
| .byte -5 # Line Base |
| .byte 14 # Line Range |
| .byte 13 # Opcode Base |
| .byte 0, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1 # Standard Opcode Lengths |
| .byte 0 # directory table (invalid) |
| .Lprologue_v5_end: |
| .Lunit_v5_end: |
| |
| # Short prologue |
| .long .Lunit_short_prologue_end - .Lunit_short_prologue_start # unit length |
| .Lunit_short_prologue_start: |
| .short 4 # version |
| .long .Lprologue_short_prologue_end-.Lprologue_short_prologue_start - 2 # Length of Prologue |
| .Lprologue_short_prologue_start: |
| .byte 1 # Minimum Instruction Length |
| .byte 1 # Maximum Operations per Instruction |
| .byte 1 # Default is_stmt |
| .byte -5 # Line Base |
| .byte 14 # Line Range |
| .byte 13 # Opcode Base |
| .byte 0, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1 # Standard Opcode Lengths |
| .asciz "dir1" # Include table |
| .asciz "dir2" |
| .byte 0 |
| .asciz "file1" # File table |
| .byte 0, 0, 0 |
| .asciz "file2" |
| .byte 1, 0, 0 |
| .byte 0 |
| .Lprologue_short_prologue_end: |
| .Lunit_short_prologue_end: |
| |
| # Over-long prologue |
| .long .Lunit_long_prologue_end - .Lunit_long_prologue_start # unit length |
| .Lunit_long_prologue_start: |
| .short 4 # version |
| .long .Lprologue_long_prologue_end-.Lprologue_long_prologue_start + 1 # Length of Prologue |
| .Lprologue_long_prologue_start: |
| .byte 1 # Minimum Instruction Length |
| .byte 1 # Maximum Operations per Instruction |
| .byte 1 # Default is_stmt |
| .byte -5 # Line Base |
| .byte 14 # Line Range |
| .byte 13 # Opcode Base |
| .byte 0, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1 # Standard Opcode Lengths |
| .asciz "dir1" # Include table |
| .asciz "dir2" |
| .byte 0 |
| .asciz "file1" # File table |
| .byte 0, 0, 0 |
| .asciz "file2" |
| .byte 1, 0, 0 |
| .byte 0 |
| .Lprologue_long_prologue_end: |
| .Lunit_long_prologue_end: |
| |
| # Over-long extended opcode |
| .long .Lunit_long_opcode_end - .Lunit_long_opcode_start # unit length |
| .Lunit_long_opcode_start: |
| .short 4 # version |
| .long .Lprologue_long_opcode_end-.Lprologue_long_opcode_start # Length of Prologue |
| .Lprologue_long_opcode_start: |
| .byte 1 # Minimum Instruction Length |
| .byte 1 # Maximum Operations per Instruction |
| .byte 1 # Default is_stmt |
| .byte -5 # Line Base |
| .byte 14 # Line Range |
| .byte 13 # Opcode Base |
| .byte 0, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1 # Standard Opcode Lengths |
| .asciz "dir1" # Include table |
| .asciz "dir2" |
| .byte 0 |
| .asciz "file1" # File table |
| .byte 0, 0, 0 |
| .asciz "file2" |
| .byte 1, 0, 0 |
| .byte 0 |
| .Lprologue_long_opcode_end: |
| .byte 0, 9, 2 # DW_LNE_set_address |
| .quad 0xabbadaba |
| .byte 0, 2, 1 # DW_LNE_end_sequence (wrong length) |
| .byte 0, 9, 2 # DW_LNE_set_address |
| .quad 0xbabb1e45 |
| .byte 0, 1, 1 # DW_LNE_end_sequence (wrong length) |
| .Lunit_long_opcode_end: |
| |
| # No end of sequence |
| .long .Lunit_no_eos_end - .Lunit_no_eos_start # unit length |
| .Lunit_no_eos_start: |
| .short 4 # version |
| .long .Lprologue_no_eos_end-.Lprologue_no_eos_start # Length of Prologue |
| .Lprologue_no_eos_start: |
| .byte 1 # Minimum Instruction Length |
| .byte 1 # Maximum Operations per Instruction |
| .byte 1 # Default is_stmt |
| .byte -5 # Line Base |
| .byte 14 # Line Range |
| .byte 13 # Opcode Base |
| .byte 0, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1 # Standard Opcode Lengths |
| .asciz "dir1" # Include table |
| .asciz "dir2" |
| .byte 0 |
| .asciz "file1" # File table |
| .byte 0, 0, 0 |
| .asciz "file2" |
| .byte 1, 0, 0 |
| .byte 0 |
| .Lprologue_no_eos_end: |
| .byte 0, 9, 2 # DW_LNE_set_address |
| .quad 0xdeadfade |
| .byte 1 # DW_LNS_copy |
| .Lunit_no_eos_end: |
| |
| # Trailing good section |
| .long .Lunit_good_end - .Lunit_good_start # Length of Unit (DWARF-32 format) |
| .Lunit_good_start: |
| .short 4 # DWARF version number |
| .long .Lprologue_good_end-.Lprologue_good_start # Length of Prologue |
| .Lprologue_good_start: |
| .byte 1 # Minimum Instruction Length |
| .byte 1 # Maximum Operations per Instruction |
| .byte 1 # Default is_stmt |
| .byte -5 # Line Base |
| .byte 14 # Line Range |
| .byte 13 # Opcode Base |
| .byte 0, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1 # Standard Opcode Lengths |
| .asciz "dir1" # Include table |
| .asciz "dir2" |
| .byte 0 |
| .asciz "file1" # File table |
| .byte 0, 0, 0 |
| .asciz "file2" |
| .byte 1, 0, 0 |
| .byte 0 |
| .Lprologue_good_end: |
| .byte 0, 9, 2 # DW_LNE_set_address |
| .quad 0xcafebabe |
| .byte 0, 1, 1 # DW_LNE_end_sequence |
| .Lunit_good_end: |
