blob: 75f8652ff17bfc09945edf963fdc790e91c594c3 [file] [log] [blame]
//===- DAGCombiner.cpp - Implement a DAG node combiner --------------------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This pass combines dag nodes to form fewer, simpler DAG nodes. It can be run
// both before and after the DAG is legalized.
//
// This pass is not a substitute for the LLVM IR instcombine pass. This pass is
// primarily intended to handle simplification opportunities that are implicit
// in the LLVM IR and exposed by the various codegen lowering phases.
//
//===----------------------------------------------------------------------===//
#include "llvm/ADT/APFloat.h"
#include "llvm/ADT/APInt.h"
#include "llvm/ADT/ArrayRef.h"
#include "llvm/ADT/DenseMap.h"
#include "llvm/ADT/IntervalMap.h"
#include "llvm/ADT/None.h"
#include "llvm/ADT/Optional.h"
#include "llvm/ADT/STLExtras.h"
#include "llvm/ADT/SetVector.h"
#include "llvm/ADT/SmallBitVector.h"
#include "llvm/ADT/SmallPtrSet.h"
#include "llvm/ADT/SmallSet.h"
#include "llvm/ADT/SmallVector.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/Analysis/AliasAnalysis.h"
#include "llvm/Analysis/MemoryLocation.h"
#include "llvm/CodeGen/DAGCombine.h"
#include "llvm/CodeGen/ISDOpcodes.h"
#include "llvm/CodeGen/MachineFrameInfo.h"
#include "llvm/CodeGen/MachineFunction.h"
#include "llvm/CodeGen/MachineMemOperand.h"
#include "llvm/CodeGen/RuntimeLibcalls.h"
#include "llvm/CodeGen/SelectionDAG.h"
#include "llvm/CodeGen/SelectionDAGAddressAnalysis.h"
#include "llvm/CodeGen/SelectionDAGNodes.h"
#include "llvm/CodeGen/SelectionDAGTargetInfo.h"
#include "llvm/CodeGen/TargetLowering.h"
#include "llvm/CodeGen/TargetRegisterInfo.h"
#include "llvm/CodeGen/TargetSubtargetInfo.h"
#include "llvm/CodeGen/ValueTypes.h"
#include "llvm/IR/Attributes.h"
#include "llvm/IR/Constant.h"
#include "llvm/IR/DataLayout.h"
#include "llvm/IR/DerivedTypes.h"
#include "llvm/IR/Function.h"
#include "llvm/IR/LLVMContext.h"
#include "llvm/IR/Metadata.h"
#include "llvm/Support/Casting.h"
#include "llvm/Support/CodeGen.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Compiler.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/KnownBits.h"
#include "llvm/Support/MachineValueType.h"
#include "llvm/Support/MathExtras.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/Target/TargetMachine.h"
#include "llvm/Target/TargetOptions.h"
#include <algorithm>
#include <cassert>
#include <cstdint>
#include <functional>
#include <iterator>
#include <string>
#include <tuple>
#include <utility>
using namespace llvm;
#define DEBUG_TYPE "dagcombine"
STATISTIC(NodesCombined , "Number of dag nodes combined");
STATISTIC(PreIndexedNodes , "Number of pre-indexed nodes created");
STATISTIC(PostIndexedNodes, "Number of post-indexed nodes created");
STATISTIC(OpsNarrowed , "Number of load/op/store narrowed");
STATISTIC(LdStFP2Int , "Number of fp load/store pairs transformed to int");
STATISTIC(SlicedLoads, "Number of load sliced");
STATISTIC(NumFPLogicOpsConv, "Number of logic ops converted to fp ops");
static cl::opt<bool>
CombinerGlobalAA("combiner-global-alias-analysis", cl::Hidden,
cl::desc("Enable DAG combiner's use of IR alias analysis"));
static cl::opt<bool>
UseTBAA("combiner-use-tbaa", cl::Hidden, cl::init(true),
cl::desc("Enable DAG combiner's use of TBAA"));
#ifndef NDEBUG
static cl::opt<std::string>
CombinerAAOnlyFunc("combiner-aa-only-func", cl::Hidden,
cl::desc("Only use DAG-combiner alias analysis in this"
" function"));
#endif
/// Hidden option to stress test load slicing, i.e., when this option
/// is enabled, load slicing bypasses most of its profitability guards.
static cl::opt<bool>
StressLoadSlicing("combiner-stress-load-slicing", cl::Hidden,
cl::desc("Bypass the profitability model of load slicing"),
cl::init(false));
static cl::opt<bool>
MaySplitLoadIndex("combiner-split-load-index", cl::Hidden, cl::init(true),
cl::desc("DAG combiner may split indexing from loads"));
namespace {
class DAGCombiner {
SelectionDAG &DAG;
const TargetLowering &TLI;
CombineLevel Level;
CodeGenOpt::Level OptLevel;
bool LegalOperations = false;
bool LegalTypes = false;
bool ForCodeSize;
/// Worklist of all of the nodes that need to be simplified.
///
/// This must behave as a stack -- new nodes to process are pushed onto the
/// back and when processing we pop off of the back.
///
/// The worklist will not contain duplicates but may contain null entries
/// due to nodes being deleted from the underlying DAG.
SmallVector<SDNode *, 64> Worklist;
/// Mapping from an SDNode to its position on the worklist.
///
/// This is used to find and remove nodes from the worklist (by nulling
/// them) when they are deleted from the underlying DAG. It relies on
/// stable indices of nodes within the worklist.
DenseMap<SDNode *, unsigned> WorklistMap;
/// Set of nodes which have been combined (at least once).
///
/// This is used to allow us to reliably add any operands of a DAG node
/// which have not yet been combined to the worklist.
SmallPtrSet<SDNode *, 32> CombinedNodes;
// AA - Used for DAG load/store alias analysis.
AliasAnalysis *AA;
/// When an instruction is simplified, add all users of the instruction to
/// the work lists because they might get more simplified now.
void AddUsersToWorklist(SDNode *N) {
for (SDNode *Node : N->uses())
AddToWorklist(Node);
}
/// Call the node-specific routine that folds each particular type of node.
SDValue visit(SDNode *N);
public:
DAGCombiner(SelectionDAG &D, AliasAnalysis *AA, CodeGenOpt::Level OL)
: DAG(D), TLI(D.getTargetLoweringInfo()), Level(BeforeLegalizeTypes),
OptLevel(OL), AA(AA) {
ForCodeSize = DAG.getMachineFunction().getFunction().optForSize();
MaximumLegalStoreInBits = 0;
for (MVT VT : MVT::all_valuetypes())
if (EVT(VT).isSimple() && VT != MVT::Other &&
TLI.isTypeLegal(EVT(VT)) &&
VT.getSizeInBits() >= MaximumLegalStoreInBits)
MaximumLegalStoreInBits = VT.getSizeInBits();
}
/// Add to the worklist making sure its instance is at the back (next to be
/// processed.)
void AddToWorklist(SDNode *N) {
assert(N->getOpcode() != ISD::DELETED_NODE &&
"Deleted Node added to Worklist");
// Skip handle nodes as they can't usefully be combined and confuse the
// zero-use deletion strategy.
if (N->getOpcode() == ISD::HANDLENODE)
return;
if (WorklistMap.insert(std::make_pair(N, Worklist.size())).second)
Worklist.push_back(N);
}
/// Remove all instances of N from the worklist.
void removeFromWorklist(SDNode *N) {
CombinedNodes.erase(N);
auto It = WorklistMap.find(N);
if (It == WorklistMap.end())
return; // Not in the worklist.
// Null out the entry rather than erasing it to avoid a linear operation.
Worklist[It->second] = nullptr;
WorklistMap.erase(It);
}
void deleteAndRecombine(SDNode *N);
bool recursivelyDeleteUnusedNodes(SDNode *N);
/// Replaces all uses of the results of one DAG node with new values.
SDValue CombineTo(SDNode *N, const SDValue *To, unsigned NumTo,
bool AddTo = true);
/// Replaces all uses of the results of one DAG node with new values.
SDValue CombineTo(SDNode *N, SDValue Res, bool AddTo = true) {
return CombineTo(N, &Res, 1, AddTo);
}
/// Replaces all uses of the results of one DAG node with new values.
SDValue CombineTo(SDNode *N, SDValue Res0, SDValue Res1,
bool AddTo = true) {
SDValue To[] = { Res0, Res1 };
return CombineTo(N, To, 2, AddTo);
}
void CommitTargetLoweringOpt(const TargetLowering::TargetLoweringOpt &TLO);
private:
unsigned MaximumLegalStoreInBits;
/// Check the specified integer node value to see if it can be simplified or
/// if things it uses can be simplified by bit propagation.
/// If so, return true.
bool SimplifyDemandedBits(SDValue Op) {
unsigned BitWidth = Op.getScalarValueSizeInBits();
APInt Demanded = APInt::getAllOnesValue(BitWidth);
return SimplifyDemandedBits(Op, Demanded);
}
/// Check the specified vector node value to see if it can be simplified or
/// if things it uses can be simplified as it only uses some of the
/// elements. If so, return true.
bool SimplifyDemandedVectorElts(SDValue Op) {
unsigned NumElts = Op.getValueType().getVectorNumElements();
APInt Demanded = APInt::getAllOnesValue(NumElts);
return SimplifyDemandedVectorElts(Op, Demanded);
}
bool SimplifyDemandedBits(SDValue Op, const APInt &Demanded);
bool SimplifyDemandedVectorElts(SDValue Op, const APInt &Demanded,
bool AssumeSingleUse = false);
bool CombineToPreIndexedLoadStore(SDNode *N);
bool CombineToPostIndexedLoadStore(SDNode *N);
SDValue SplitIndexingFromLoad(LoadSDNode *LD);
bool SliceUpLoad(SDNode *N);
// Scalars have size 0 to distinguish from singleton vectors.
SDValue ForwardStoreValueToDirectLoad(LoadSDNode *LD);
bool getTruncatedStoreValue(StoreSDNode *ST, SDValue &Val);
bool extendLoadedValueToExtension(LoadSDNode *LD, SDValue &Val);
/// Replace an ISD::EXTRACT_VECTOR_ELT of a load with a narrowed
/// load.
///
/// \param EVE ISD::EXTRACT_VECTOR_ELT to be replaced.
/// \param InVecVT type of the input vector to EVE with bitcasts resolved.
/// \param EltNo index of the vector element to load.
/// \param OriginalLoad load that EVE came from to be replaced.
/// \returns EVE on success SDValue() on failure.
SDValue scalarizeExtractedVectorLoad(SDNode *EVE, EVT InVecVT,
SDValue EltNo,
LoadSDNode *OriginalLoad);
void ReplaceLoadWithPromotedLoad(SDNode *Load, SDNode *ExtLoad);
SDValue PromoteOperand(SDValue Op, EVT PVT, bool &Replace);
SDValue SExtPromoteOperand(SDValue Op, EVT PVT);
SDValue ZExtPromoteOperand(SDValue Op, EVT PVT);
SDValue PromoteIntBinOp(SDValue Op);
SDValue PromoteIntShiftOp(SDValue Op);
SDValue PromoteExtend(SDValue Op);
bool PromoteLoad(SDValue Op);
/// Call the node-specific routine that knows how to fold each
/// particular type of node. If that doesn't do anything, try the
/// target-specific DAG combines.
SDValue combine(SDNode *N);
// Visitation implementation - Implement dag node combining for different
// node types. The semantics are as follows:
// Return Value:
// SDValue.getNode() == 0 - No change was made
// SDValue.getNode() == N - N was replaced, is dead and has been handled.
// otherwise - N should be replaced by the returned Operand.
//
SDValue visitTokenFactor(SDNode *N);
SDValue visitMERGE_VALUES(SDNode *N);
SDValue visitADD(SDNode *N);
SDValue visitADDLike(SDValue N0, SDValue N1, SDNode *LocReference);
SDValue visitSUB(SDNode *N);
SDValue visitADDC(SDNode *N);
SDValue visitUADDO(SDNode *N);
SDValue visitUADDOLike(SDValue N0, SDValue N1, SDNode *N);
SDValue visitSUBC(SDNode *N);
SDValue visitUSUBO(SDNode *N);
SDValue visitADDE(SDNode *N);
SDValue visitADDCARRY(SDNode *N);
SDValue visitADDCARRYLike(SDValue N0, SDValue N1, SDValue CarryIn, SDNode *N);
SDValue visitSUBE(SDNode *N);
SDValue visitSUBCARRY(SDNode *N);
SDValue visitMUL(SDNode *N);
SDValue useDivRem(SDNode *N);
SDValue visitSDIV(SDNode *N);
SDValue visitSDIVLike(SDValue N0, SDValue N1, SDNode *N);
SDValue visitUDIV(SDNode *N);
SDValue visitUDIVLike(SDValue N0, SDValue N1, SDNode *N);
SDValue visitREM(SDNode *N);
SDValue visitMULHU(SDNode *N);
SDValue visitMULHS(SDNode *N);
SDValue visitSMUL_LOHI(SDNode *N);
SDValue visitUMUL_LOHI(SDNode *N);
SDValue visitSMULO(SDNode *N);
SDValue visitUMULO(SDNode *N);
SDValue visitIMINMAX(SDNode *N);
SDValue visitAND(SDNode *N);
SDValue visitANDLike(SDValue N0, SDValue N1, SDNode *N);
SDValue visitOR(SDNode *N);
SDValue visitORLike(SDValue N0, SDValue N1, SDNode *N);
SDValue visitXOR(SDNode *N);
SDValue SimplifyVBinOp(SDNode *N);
SDValue visitSHL(SDNode *N);
SDValue visitSRA(SDNode *N);
SDValue visitSRL(SDNode *N);
SDValue visitFunnelShift(SDNode *N);
SDValue visitRotate(SDNode *N);
SDValue visitABS(SDNode *N);
SDValue visitBSWAP(SDNode *N);
SDValue visitBITREVERSE(SDNode *N);
SDValue visitCTLZ(SDNode *N);
SDValue visitCTLZ_ZERO_UNDEF(SDNode *N);
SDValue visitCTTZ(SDNode *N);
SDValue visitCTTZ_ZERO_UNDEF(SDNode *N);
SDValue visitCTPOP(SDNode *N);
SDValue visitSELECT(SDNode *N);
SDValue visitVSELECT(SDNode *N);
SDValue visitSELECT_CC(SDNode *N);
SDValue visitSETCC(SDNode *N);
SDValue visitSETCCCARRY(SDNode *N);
SDValue visitSIGN_EXTEND(SDNode *N);
SDValue visitZERO_EXTEND(SDNode *N);
SDValue visitANY_EXTEND(SDNode *N);
SDValue visitAssertExt(SDNode *N);
SDValue visitSIGN_EXTEND_INREG(SDNode *N);
SDValue visitSIGN_EXTEND_VECTOR_INREG(SDNode *N);
SDValue visitZERO_EXTEND_VECTOR_INREG(SDNode *N);
SDValue visitTRUNCATE(SDNode *N);
SDValue visitBITCAST(SDNode *N);
SDValue visitBUILD_PAIR(SDNode *N);
SDValue visitFADD(SDNode *N);
SDValue visitFSUB(SDNode *N);
SDValue visitFMUL(SDNode *N);
SDValue visitFMA(SDNode *N);
SDValue visitFDIV(SDNode *N);
SDValue visitFREM(SDNode *N);
SDValue visitFSQRT(SDNode *N);
SDValue visitFCOPYSIGN(SDNode *N);
SDValue visitFPOW(SDNode *N);
SDValue visitSINT_TO_FP(SDNode *N);
SDValue visitUINT_TO_FP(SDNode *N);
SDValue visitFP_TO_SINT(SDNode *N);
SDValue visitFP_TO_UINT(SDNode *N);
SDValue visitFP_ROUND(SDNode *N);
SDValue visitFP_ROUND_INREG(SDNode *N);
SDValue visitFP_EXTEND(SDNode *N);
SDValue visitFNEG(SDNode *N);
SDValue visitFABS(SDNode *N);
SDValue visitFCEIL(SDNode *N);
SDValue visitFTRUNC(SDNode *N);
SDValue visitFFLOOR(SDNode *N);
SDValue visitFMINNUM(SDNode *N);
SDValue visitFMAXNUM(SDNode *N);
SDValue visitFMINIMUM(SDNode *N);
SDValue visitFMAXIMUM(SDNode *N);
SDValue visitBRCOND(SDNode *N);
SDValue visitBR_CC(SDNode *N);
SDValue visitLOAD(SDNode *N);
SDValue replaceStoreChain(StoreSDNode *ST, SDValue BetterChain);
SDValue replaceStoreOfFPConstant(StoreSDNode *ST);
SDValue visitSTORE(SDNode *N);
SDValue visitINSERT_VECTOR_ELT(SDNode *N);
SDValue visitEXTRACT_VECTOR_ELT(SDNode *N);
SDValue visitBUILD_VECTOR(SDNode *N);
SDValue visitCONCAT_VECTORS(SDNode *N);
SDValue visitEXTRACT_SUBVECTOR(SDNode *N);
SDValue visitVECTOR_SHUFFLE(SDNode *N);
SDValue visitSCALAR_TO_VECTOR(SDNode *N);
SDValue visitINSERT_SUBVECTOR(SDNode *N);
SDValue visitMLOAD(SDNode *N);
SDValue visitMSTORE(SDNode *N);
SDValue visitMGATHER(SDNode *N);
SDValue visitMSCATTER(SDNode *N);
SDValue visitFP_TO_FP16(SDNode *N);
SDValue visitFP16_TO_FP(SDNode *N);
SDValue visitFADDForFMACombine(SDNode *N);
SDValue visitFSUBForFMACombine(SDNode *N);
SDValue visitFMULForFMADistributiveCombine(SDNode *N);
SDValue XformToShuffleWithZero(SDNode *N);
SDValue ReassociateOps(unsigned Opc, const SDLoc &DL, SDValue N0,
SDValue N1, SDNodeFlags Flags);
SDValue visitShiftByConstant(SDNode *N, ConstantSDNode *Amt);
SDValue foldSelectOfConstants(SDNode *N);
SDValue foldVSelectOfConstants(SDNode *N);
SDValue foldBinOpIntoSelect(SDNode *BO);
bool SimplifySelectOps(SDNode *SELECT, SDValue LHS, SDValue RHS);
SDValue hoistLogicOpWithSameOpcodeHands(SDNode *N);
SDValue SimplifySelect(const SDLoc &DL, SDValue N0, SDValue N1, SDValue N2);
SDValue SimplifySelectCC(const SDLoc &DL, SDValue N0, SDValue N1,
SDValue N2, SDValue N3, ISD::CondCode CC,
bool NotExtCompare = false);
SDValue convertSelectOfFPConstantsToLoadOffset(
const SDLoc &DL, SDValue N0, SDValue N1, SDValue N2, SDValue N3,
ISD::CondCode CC);
SDValue foldSelectCCToShiftAnd(const SDLoc &DL, SDValue N0, SDValue N1,
SDValue N2, SDValue N3, ISD::CondCode CC);
SDValue foldLogicOfSetCCs(bool IsAnd, SDValue N0, SDValue N1,
const SDLoc &DL);
SDValue unfoldMaskedMerge(SDNode *N);
SDValue unfoldExtremeBitClearingToShifts(SDNode *N);
SDValue SimplifySetCC(EVT VT, SDValue N0, SDValue N1, ISD::CondCode Cond,
const SDLoc &DL, bool foldBooleans);
SDValue rebuildSetCC(SDValue N);
bool isSetCCEquivalent(SDValue N, SDValue &LHS, SDValue &RHS,
SDValue &CC) const;
bool isOneUseSetCC(SDValue N) const;
SDValue SimplifyNodeWithTwoResults(SDNode *N, unsigned LoOp,
unsigned HiOp);
SDValue CombineConsecutiveLoads(SDNode *N, EVT VT);
SDValue CombineExtLoad(SDNode *N);
SDValue CombineZExtLogicopShiftLoad(SDNode *N);
SDValue combineRepeatedFPDivisors(SDNode *N);
SDValue combineInsertEltToShuffle(SDNode *N, unsigned InsIndex);
SDValue ConstantFoldBITCASTofBUILD_VECTOR(SDNode *, EVT);
SDValue BuildSDIV(SDNode *N);
SDValue BuildSDIVPow2(SDNode *N);
SDValue BuildUDIV(SDNode *N);
SDValue BuildLogBase2(SDValue V, const SDLoc &DL);
SDValue BuildReciprocalEstimate(SDValue Op, SDNodeFlags Flags);
SDValue buildRsqrtEstimate(SDValue Op, SDNodeFlags Flags);
SDValue buildSqrtEstimate(SDValue Op, SDNodeFlags Flags);
SDValue buildSqrtEstimateImpl(SDValue Op, SDNodeFlags Flags, bool Recip);
SDValue buildSqrtNROneConst(SDValue Arg, SDValue Est, unsigned Iterations,
SDNodeFlags Flags, bool Reciprocal);
SDValue buildSqrtNRTwoConst(SDValue Arg, SDValue Est, unsigned Iterations,
SDNodeFlags Flags, bool Reciprocal);
SDValue MatchBSwapHWordLow(SDNode *N, SDValue N0, SDValue N1,
bool DemandHighBits = true);
SDValue MatchBSwapHWord(SDNode *N, SDValue N0, SDValue N1);
SDNode *MatchRotatePosNeg(SDValue Shifted, SDValue Pos, SDValue Neg,
SDValue InnerPos, SDValue InnerNeg,
unsigned PosOpcode, unsigned NegOpcode,
const SDLoc &DL);
SDNode *MatchRotate(SDValue LHS, SDValue RHS, const SDLoc &DL);
SDValue MatchLoadCombine(SDNode *N);
SDValue ReduceLoadWidth(SDNode *N);
SDValue ReduceLoadOpStoreWidth(SDNode *N);
SDValue splitMergedValStore(StoreSDNode *ST);
SDValue TransformFPLoadStorePair(SDNode *N);
SDValue convertBuildVecZextToZext(SDNode *N);
SDValue reduceBuildVecExtToExtBuildVec(SDNode *N);
SDValue reduceBuildVecToShuffle(SDNode *N);
SDValue createBuildVecShuffle(const SDLoc &DL, SDNode *N,
ArrayRef<int> VectorMask, SDValue VecIn1,
SDValue VecIn2, unsigned LeftIdx);
SDValue matchVSelectOpSizesWithSetCC(SDNode *Cast);
/// Walk up chain skipping non-aliasing memory nodes,
/// looking for aliasing nodes and adding them to the Aliases vector.
void GatherAllAliases(SDNode *N, SDValue OriginalChain,
SmallVectorImpl<SDValue> &Aliases);
/// Return true if there is any possibility that the two addresses overlap.
bool isAlias(LSBaseSDNode *Op0, LSBaseSDNode *Op1) const;
/// Walk up chain skipping non-aliasing memory nodes, looking for a better
/// chain (aliasing node.)
SDValue FindBetterChain(SDNode *N, SDValue Chain);
/// Try to replace a store and any possibly adjacent stores on
/// consecutive chains with better chains. Return true only if St is
/// replaced.
///
/// Notice that other chains may still be replaced even if the function
/// returns false.
bool findBetterNeighborChains(StoreSDNode *St);
// Helper for findBetterNeighborChains. Walk up store chain add additional
// chained stores that do not overlap and can be parallelized.
bool parallelizeChainedStores(StoreSDNode *St);
/// Holds a pointer to an LSBaseSDNode as well as information on where it
/// is located in a sequence of memory operations connected by a chain.
struct MemOpLink {
// Ptr to the mem node.
LSBaseSDNode *MemNode;
// Offset from the base ptr.
int64_t OffsetFromBase;
MemOpLink(LSBaseSDNode *N, int64_t Offset)
: MemNode(N), OffsetFromBase(Offset) {}
};
/// This is a helper function for visitMUL to check the profitability
/// of folding (mul (add x, c1), c2) -> (add (mul x, c2), c1*c2).
/// MulNode is the original multiply, AddNode is (add x, c1),
/// and ConstNode is c2.
bool isMulAddWithConstProfitable(SDNode *MulNode,
SDValue &AddNode,
SDValue &ConstNode);
/// This is a helper function for visitAND and visitZERO_EXTEND. Returns
/// true if the (and (load x) c) pattern matches an extload. ExtVT returns
/// the type of the loaded value to be extended.
bool isAndLoadExtLoad(ConstantSDNode *AndC, LoadSDNode *LoadN,
EVT LoadResultTy, EVT &ExtVT);
/// Helper function to calculate whether the given Load/Store can have its
/// width reduced to ExtVT.
bool isLegalNarrowLdSt(LSBaseSDNode *LDSTN, ISD::LoadExtType ExtType,
EVT &MemVT, unsigned ShAmt = 0);
/// Used by BackwardsPropagateMask to find suitable loads.
bool SearchForAndLoads(SDNode *N, SmallVectorImpl<LoadSDNode*> &Loads,
SmallPtrSetImpl<SDNode*> &NodesWithConsts,
ConstantSDNode *Mask, SDNode *&NodeToMask);
/// Attempt to propagate a given AND node back to load leaves so that they
/// can be combined into narrow loads.
bool BackwardsPropagateMask(SDNode *N, SelectionDAG &DAG);
/// Helper function for MergeConsecutiveStores which merges the
/// component store chains.
SDValue getMergeStoreChains(SmallVectorImpl<MemOpLink> &StoreNodes,
unsigned NumStores);
/// This is a helper function for MergeConsecutiveStores. When the
/// source elements of the consecutive stores are all constants or
/// all extracted vector elements, try to merge them into one
/// larger store introducing bitcasts if necessary. \return True
/// if a merged store was created.
bool MergeStoresOfConstantsOrVecElts(SmallVectorImpl<MemOpLink> &StoreNodes,
EVT MemVT, unsigned NumStores,
bool IsConstantSrc, bool UseVector,
bool UseTrunc);
/// This is a helper function for MergeConsecutiveStores. Stores
/// that potentially may be merged with St are placed in
/// StoreNodes. RootNode is a chain predecessor to all store
/// candidates.
void getStoreMergeCandidates(StoreSDNode *St,
SmallVectorImpl<MemOpLink> &StoreNodes,
SDNode *&Root);
/// Helper function for MergeConsecutiveStores. Checks if
/// candidate stores have indirect dependency through their
/// operands. RootNode is the predecessor to all stores calculated
/// by getStoreMergeCandidates and is used to prune the dependency check.
/// \return True if safe to merge.
bool checkMergeStoreCandidatesForDependencies(
SmallVectorImpl<MemOpLink> &StoreNodes, unsigned NumStores,
SDNode *RootNode);
/// Merge consecutive store operations into a wide store.
/// This optimization uses wide integers or vectors when possible.
/// \return number of stores that were merged into a merged store (the
/// affected nodes are stored as a prefix in \p StoreNodes).
bool MergeConsecutiveStores(StoreSDNode *St);
/// Try to transform a truncation where C is a constant:
/// (trunc (and X, C)) -> (and (trunc X), (trunc C))
///
/// \p N needs to be a truncation and its first operand an AND. Other
/// requirements are checked by the function (e.g. that trunc is
/// single-use) and if missed an empty SDValue is returned.
SDValue distributeTruncateThroughAnd(SDNode *N);
/// Helper function to determine whether the target supports operation
/// given by \p Opcode for type \p VT, that is, whether the operation
/// is legal or custom before legalizing operations, and whether is
/// legal (but not custom) after legalization.
bool hasOperation(unsigned Opcode, EVT VT) {
if (LegalOperations)
return TLI.isOperationLegal(Opcode, VT);
return TLI.isOperationLegalOrCustom(Opcode, VT);
}
public:
/// Runs the dag combiner on all nodes in the work list
void Run(CombineLevel AtLevel);
SelectionDAG &getDAG() const { return DAG; }
/// Returns a type large enough to hold any valid shift amount - before type
/// legalization these can be huge.
EVT getShiftAmountTy(EVT LHSTy) {
assert(LHSTy.isInteger() && "Shift amount is not an integer type!");
return TLI.getShiftAmountTy(LHSTy, DAG.getDataLayout(), LegalTypes);
}
/// This method returns true if we are running before type legalization or
/// if the specified VT is legal.
bool isTypeLegal(const EVT &VT) {
if (!LegalTypes) return true;
return TLI.isTypeLegal(VT);
}
/// Convenience wrapper around TargetLowering::getSetCCResultType
EVT getSetCCResultType(EVT VT) const {
return TLI.getSetCCResultType(DAG.getDataLayout(), *DAG.getContext(), VT);
}
void ExtendSetCCUses(const SmallVectorImpl<SDNode *> &SetCCs,
SDValue OrigLoad, SDValue ExtLoad,
ISD::NodeType ExtType);
};
/// This class is a DAGUpdateListener that removes any deleted
/// nodes from the worklist.
class WorklistRemover : public SelectionDAG::DAGUpdateListener {
DAGCombiner &DC;
public:
explicit WorklistRemover(DAGCombiner &dc)
: SelectionDAG::DAGUpdateListener(dc.getDAG()), DC(dc) {}
void NodeDeleted(SDNode *N, SDNode *E) override {
DC.removeFromWorklist(N);
}
};
} // end anonymous namespace
//===----------------------------------------------------------------------===//
// TargetLowering::DAGCombinerInfo implementation
//===----------------------------------------------------------------------===//
void TargetLowering::DAGCombinerInfo::AddToWorklist(SDNode *N) {
((DAGCombiner*)DC)->AddToWorklist(N);
}
SDValue TargetLowering::DAGCombinerInfo::
CombineTo(SDNode *N, ArrayRef<SDValue> To, bool AddTo) {
return ((DAGCombiner*)DC)->CombineTo(N, &To[0], To.size(), AddTo);
}
SDValue TargetLowering::DAGCombinerInfo::
CombineTo(SDNode *N, SDValue Res, bool AddTo) {
return ((DAGCombiner*)DC)->CombineTo(N, Res, AddTo);
}
SDValue TargetLowering::DAGCombinerInfo::
CombineTo(SDNode *N, SDValue Res0, SDValue Res1, bool AddTo) {
return ((DAGCombiner*)DC)->CombineTo(N, Res0, Res1, AddTo);
}
void TargetLowering::DAGCombinerInfo::
CommitTargetLoweringOpt(const TargetLowering::TargetLoweringOpt &TLO) {
return ((DAGCombiner*)DC)->CommitTargetLoweringOpt(TLO);
}
//===----------------------------------------------------------------------===//
// Helper Functions
//===----------------------------------------------------------------------===//
void DAGCombiner::deleteAndRecombine(SDNode *N) {
removeFromWorklist(N);
// If the operands of this node are only used by the node, they will now be
// dead. Make sure to re-visit them and recursively delete dead nodes.
for (const SDValue &Op : N->ops())
// For an operand generating multiple values, one of the values may
// become dead allowing further simplification (e.g. split index
// arithmetic from an indexed load).
if (Op->hasOneUse() || Op->getNumValues() > 1)
AddToWorklist(Op.getNode());
DAG.DeleteNode(N);
}
/// Return 1 if we can compute the negated form of the specified expression for
/// the same cost as the expression itself, or 2 if we can compute the negated
/// form more cheaply than the expression itself.
static char isNegatibleForFree(SDValue Op, bool LegalOperations,
const TargetLowering &TLI,
const TargetOptions *Options,
unsigned Depth = 0) {
// fneg is removable even if it has multiple uses.
if (Op.getOpcode() == ISD::FNEG) return 2;
// Don't allow anything with multiple uses unless we know it is free.
EVT VT = Op.getValueType();
const SDNodeFlags Flags = Op->getFlags();
if (!Op.hasOneUse())
if (!(Op.getOpcode() == ISD::FP_EXTEND &&
TLI.isFPExtFree(VT, Op.getOperand(0).getValueType())))
return 0;
// Don't recurse exponentially.
if (Depth > 6) return 0;
switch (Op.getOpcode()) {
default: return false;
case ISD::ConstantFP: {
if (!LegalOperations)
return 1;
// Don't invert constant FP values after legalization unless the target says
// the negated constant is legal.
return TLI.isOperationLegal(ISD::ConstantFP, VT) ||
TLI.isFPImmLegal(neg(cast<ConstantFPSDNode>(Op)->getValueAPF()), VT);
}
case ISD::FADD:
if (!Options->UnsafeFPMath && !Flags.hasNoSignedZeros())
return 0;
// After operation legalization, it might not be legal to create new FSUBs.
if (LegalOperations && !TLI.isOperationLegalOrCustom(ISD::FSUB, VT))
return 0;
// fold (fneg (fadd A, B)) -> (fsub (fneg A), B)
if (char V = isNegatibleForFree(Op.getOperand(0), LegalOperations, TLI,
Options, Depth + 1))
return V;
// fold (fneg (fadd A, B)) -> (fsub (fneg B), A)
return isNegatibleForFree(Op.getOperand(1), LegalOperations, TLI, Options,
Depth + 1);
case ISD::FSUB:
// We can't turn -(A-B) into B-A when we honor signed zeros.
if (!Options->NoSignedZerosFPMath &&
!Flags.hasNoSignedZeros())
return 0;
// fold (fneg (fsub A, B)) -> (fsub B, A)
return 1;
case ISD::FMUL:
case ISD::FDIV:
// fold (fneg (fmul X, Y)) -> (fmul (fneg X), Y) or (fmul X, (fneg Y))
if (char V = isNegatibleForFree(Op.getOperand(0), LegalOperations, TLI,
Options, Depth + 1))
return V;
return isNegatibleForFree(Op.getOperand(1), LegalOperations, TLI, Options,
Depth + 1);
case ISD::FP_EXTEND:
case ISD::FP_ROUND:
case ISD::FSIN:
return isNegatibleForFree(Op.getOperand(0), LegalOperations, TLI, Options,
Depth + 1);
}
}
/// If isNegatibleForFree returns true, return the newly negated expression.
static SDValue GetNegatedExpression(SDValue Op, SelectionDAG &DAG,
bool LegalOperations, unsigned Depth = 0) {
const TargetOptions &Options = DAG.getTarget().Options;
// fneg is removable even if it has multiple uses.
if (Op.getOpcode() == ISD::FNEG) return Op.getOperand(0);
assert(Depth <= 6 && "GetNegatedExpression doesn't match isNegatibleForFree");
const SDNodeFlags Flags = Op.getNode()->getFlags();
switch (Op.getOpcode()) {
default: llvm_unreachable("Unknown code");
case ISD::ConstantFP: {
APFloat V = cast<ConstantFPSDNode>(Op)->getValueAPF();
V.changeSign();
return DAG.getConstantFP(V, SDLoc(Op), Op.getValueType());
}
case ISD::FADD:
assert(Options.UnsafeFPMath || Flags.hasNoSignedZeros());
// fold (fneg (fadd A, B)) -> (fsub (fneg A), B)
if (isNegatibleForFree(Op.getOperand(0), LegalOperations,
DAG.getTargetLoweringInfo(), &Options, Depth+1))
return DAG.getNode(ISD::FSUB, SDLoc(Op), Op.getValueType(),
GetNegatedExpression(Op.getOperand(0), DAG,
LegalOperations, Depth+1),
Op.getOperand(1), Flags);
// fold (fneg (fadd A, B)) -> (fsub (fneg B), A)
return DAG.getNode(ISD::FSUB, SDLoc(Op), Op.getValueType(),
GetNegatedExpression(Op.getOperand(1), DAG,
LegalOperations, Depth+1),
Op.getOperand(0), Flags);
case ISD::FSUB:
// fold (fneg (fsub 0, B)) -> B
if (ConstantFPSDNode *N0CFP = dyn_cast<ConstantFPSDNode>(Op.getOperand(0)))
if (N0CFP->isZero())
return Op.getOperand(1);
// fold (fneg (fsub A, B)) -> (fsub B, A)
return DAG.getNode(ISD::FSUB, SDLoc(Op), Op.getValueType(),
Op.getOperand(1), Op.getOperand(0), Flags);
case ISD::FMUL:
case ISD::FDIV:
// fold (fneg (fmul X, Y)) -> (fmul (fneg X), Y)
if (isNegatibleForFree(Op.getOperand(0), LegalOperations,
DAG.getTargetLoweringInfo(), &Options, Depth+1))
return DAG.getNode(Op.getOpcode(), SDLoc(Op), Op.getValueType(),
GetNegatedExpression(Op.getOperand(0), DAG,
LegalOperations, Depth+1),
Op.getOperand(1), Flags);
// fold (fneg (fmul X, Y)) -> (fmul X, (fneg Y))
return DAG.getNode(Op.getOpcode(), SDLoc(Op), Op.getValueType(),
Op.getOperand(0),
GetNegatedExpression(Op.getOperand(1), DAG,
LegalOperations, Depth+1), Flags);
case ISD::FP_EXTEND:
case ISD::FSIN:
return DAG.getNode(Op.getOpcode(), SDLoc(Op), Op.getValueType(),
GetNegatedExpression(Op.getOperand(0), DAG,
LegalOperations, Depth+1));
case ISD::FP_ROUND:
return DAG.getNode(ISD::FP_ROUND, SDLoc(Op), Op.getValueType(),
GetNegatedExpression(Op.getOperand(0), DAG,
LegalOperations, Depth+1),
Op.getOperand(1));
}
}
// APInts must be the same size for most operations, this helper
// function zero extends the shorter of the pair so that they match.
// We provide an Offset so that we can create bitwidths that won't overflow.
static void zeroExtendToMatch(APInt &LHS, APInt &RHS, unsigned Offset = 0) {
unsigned Bits = Offset + std::max(LHS.getBitWidth(), RHS.getBitWidth());
LHS = LHS.zextOrSelf(Bits);
RHS = RHS.zextOrSelf(Bits);
}
// Return true if this node is a setcc, or is a select_cc
// that selects between the target values used for true and false, making it
// equivalent to a setcc. Also, set the incoming LHS, RHS, and CC references to
// the appropriate nodes based on the type of node we are checking. This
// simplifies life a bit for the callers.
bool DAGCombiner::isSetCCEquivalent(SDValue N, SDValue &LHS, SDValue &RHS,
SDValue &CC) const {
if (N.getOpcode() == ISD::SETCC) {
LHS = N.getOperand(0);
RHS = N.getOperand(1);
CC = N.getOperand(2);
return true;
}
if (N.getOpcode() != ISD::SELECT_CC ||
!TLI.isConstTrueVal(N.getOperand(2).getNode()) ||
!TLI.isConstFalseVal(N.getOperand(3).getNode()))
return false;
if (TLI.getBooleanContents(N.getValueType()) ==
TargetLowering::UndefinedBooleanContent)
return false;
LHS = N.getOperand(0);
RHS = N.getOperand(1);
CC = N.getOperand(4);
return true;
}
/// Return true if this is a SetCC-equivalent operation with only one use.
/// If this is true, it allows the users to invert the operation for free when
/// it is profitable to do so.
bool DAGCombiner::isOneUseSetCC(SDValue N) const {
SDValue N0, N1, N2;
if (isSetCCEquivalent(N, N0, N1, N2) && N.getNode()->hasOneUse())
return true;
return false;
}
// Returns the SDNode if it is a constant float BuildVector
// or constant float.
static SDNode *isConstantFPBuildVectorOrConstantFP(SDValue N) {
if (isa<ConstantFPSDNode>(N))
return N.getNode();
if (ISD::isBuildVectorOfConstantFPSDNodes(N.getNode()))
return N.getNode();
return nullptr;
}
// Determines if it is a constant integer or a build vector of constant
// integers (and undefs).
// Do not permit build vector implicit truncation.
static bool isConstantOrConstantVector(SDValue N, bool NoOpaques = false) {
if (ConstantSDNode *Const = dyn_cast<ConstantSDNode>(N))
return !(Const->isOpaque() && NoOpaques);
if (N.getOpcode() != ISD::BUILD_VECTOR)
return false;
unsigned BitWidth = N.getScalarValueSizeInBits();
for (const SDValue &Op : N->op_values()) {
if (Op.isUndef())
continue;
ConstantSDNode *Const = dyn_cast<ConstantSDNode>(Op);
if (!Const || Const->getAPIntValue().getBitWidth() != BitWidth ||
(Const->isOpaque() && NoOpaques))
return false;
}
return true;
}
// Determines if a BUILD_VECTOR is composed of all-constants possibly mixed with
// undef's.
static bool isAnyConstantBuildVector(SDValue V, bool NoOpaques = false) {
if (V.getOpcode() != ISD::BUILD_VECTOR)
return false;
return isConstantOrConstantVector(V, NoOpaques) ||
ISD::isBuildVectorOfConstantFPSDNodes(V.getNode());
}
SDValue DAGCombiner::ReassociateOps(unsigned Opc, const SDLoc &DL, SDValue N0,
SDValue N1, SDNodeFlags Flags) {
// Don't reassociate reductions.
if (Flags.hasVectorReduction())
return SDValue();
EVT VT = N0.getValueType();
if (N0.getOpcode() == Opc && !N0->getFlags().hasVectorReduction()) {
if (SDNode *L = DAG.isConstantIntBuildVectorOrConstantInt(N0.getOperand(1))) {
if (SDNode *R = DAG.isConstantIntBuildVectorOrConstantInt(N1)) {
// reassoc. (op (op x, c1), c2) -> (op x, (op c1, c2))
if (SDValue OpNode = DAG.FoldConstantArithmetic(Opc, DL, VT, L, R))
return DAG.getNode(Opc, DL, VT, N0.getOperand(0), OpNode);
return SDValue();
}
if (N0.hasOneUse()) {
// reassoc. (op (op x, c1), y) -> (op (op x, y), c1) iff x+c1 has one
// use
SDValue OpNode = DAG.getNode(Opc, SDLoc(N0), VT, N0.getOperand(0), N1);
if (!OpNode.getNode())
return SDValue();
AddToWorklist(OpNode.getNode());
return DAG.getNode(Opc, DL, VT, OpNode, N0.getOperand(1));
}
}
}
if (N1.getOpcode() == Opc && !N1->getFlags().hasVectorReduction()) {
if (SDNode *R = DAG.isConstantIntBuildVectorOrConstantInt(N1.getOperand(1))) {
if (SDNode *L = DAG.isConstantIntBuildVectorOrConstantInt(N0)) {
// reassoc. (op c2, (op x, c1)) -> (op x, (op c1, c2))
if (SDValue OpNode = DAG.FoldConstantArithmetic(Opc, DL, VT, R, L))
return DAG.getNode(Opc, DL, VT, N1.getOperand(0), OpNode);
return SDValue();
}
if (N1.hasOneUse()) {
// reassoc. (op x, (op y, c1)) -> (op (op x, y), c1) iff x+c1 has one
// use
SDValue OpNode = DAG.getNode(Opc, SDLoc(N0), VT, N0, N1.getOperand(0));
if (!OpNode.getNode())
return SDValue();
AddToWorklist(OpNode.getNode());
return DAG.getNode(Opc, DL, VT, OpNode, N1.getOperand(1));
}
}
}
return SDValue();
}
SDValue DAGCombiner::CombineTo(SDNode *N, const SDValue *To, unsigned NumTo,
bool AddTo) {
assert(N->getNumValues() == NumTo && "Broken CombineTo call!");
++NodesCombined;
LLVM_DEBUG(dbgs() << "\nReplacing.1 "; N->dump(&DAG); dbgs() << "\nWith: ";
To[0].getNode()->dump(&DAG);
dbgs() << " and " << NumTo - 1 << " other values\n");
for (unsigned i = 0, e = NumTo; i != e; ++i)
assert((!To[i].getNode() ||
N->getValueType(i) == To[i].getValueType()) &&
"Cannot combine value to value of different type!");
WorklistRemover DeadNodes(*this);
DAG.ReplaceAllUsesWith(N, To);
if (AddTo) {
// Push the new nodes and any users onto the worklist
for (unsigned i = 0, e = NumTo; i != e; ++i) {
if (To[i].getNode()) {
AddToWorklist(To[i].getNode());
AddUsersToWorklist(To[i].getNode());
}
}
}
// Finally, if the node is now dead, remove it from the graph. The node
// may not be dead if the replacement process recursively simplified to
// something else needing this node.
if (N->use_empty())
deleteAndRecombine(N);
return SDValue(N, 0);
}
void DAGCombiner::
CommitTargetLoweringOpt(const TargetLowering::TargetLoweringOpt &TLO) {
// Replace all uses. If any nodes become isomorphic to other nodes and
// are deleted, make sure to remove them from our worklist.
WorklistRemover DeadNodes(*this);
DAG.ReplaceAllUsesOfValueWith(TLO.Old, TLO.New);
// Push the new node and any (possibly new) users onto the worklist.
AddToWorklist(TLO.New.getNode());
AddUsersToWorklist(TLO.New.getNode());
// Finally, if the node is now dead, remove it from the graph. The node
// may not be dead if the replacement process recursively simplified to
// something else needing this node.
if (TLO.Old.getNode()->use_empty())
deleteAndRecombine(TLO.Old.getNode());
}
/// Check the specified integer node value to see if it can be simplified or if
/// things it uses can be simplified by bit propagation. If so, return true.
bool DAGCombiner::SimplifyDemandedBits(SDValue Op, const APInt &Demanded) {
TargetLowering::TargetLoweringOpt TLO(DAG, LegalTypes, LegalOperations);
KnownBits Known;
if (!TLI.SimplifyDemandedBits(Op, Demanded, Known, TLO))
return false;
// Revisit the node.
AddToWorklist(Op.getNode());
// Replace the old value with the new one.
++NodesCombined;
LLVM_DEBUG(dbgs() << "\nReplacing.2 "; TLO.Old.getNode()->dump(&DAG);
dbgs() << "\nWith: "; TLO.New.getNode()->dump(&DAG);
dbgs() << '\n');
CommitTargetLoweringOpt(TLO);
return true;
}
/// Check the specified vector node value to see if it can be simplified or
/// if things it uses can be simplified as it only uses some of the elements.
/// If so, return true.
bool DAGCombiner::SimplifyDemandedVectorElts(SDValue Op, const APInt &Demanded,
bool AssumeSingleUse) {
TargetLowering::TargetLoweringOpt TLO(DAG, LegalTypes, LegalOperations);
APInt KnownUndef, KnownZero;
if (!TLI.SimplifyDemandedVectorElts(Op, Demanded, KnownUndef, KnownZero, TLO,
0, AssumeSingleUse))
return false;
// Revisit the node.
AddToWorklist(Op.getNode());
// Replace the old value with the new one.
++NodesCombined;
LLVM_DEBUG(dbgs() << "\nReplacing.2 "; TLO.Old.getNode()->dump(&DAG);
dbgs() << "\nWith: "; TLO.New.getNode()->dump(&DAG);
dbgs() << '\n');
CommitTargetLoweringOpt(TLO);
return true;
}
void DAGCombiner::ReplaceLoadWithPromotedLoad(SDNode *Load, SDNode *ExtLoad) {
SDLoc DL(Load);
EVT VT = Load->getValueType(0);
SDValue Trunc = DAG.getNode(ISD::TRUNCATE, DL, VT, SDValue(ExtLoad, 0));
LLVM_DEBUG(dbgs() << "\nReplacing.9 "; Load->dump(&DAG); dbgs() << "\nWith: ";
Trunc.getNode()->dump(&DAG); dbgs() << '\n');
WorklistRemover DeadNodes(*this);
DAG.ReplaceAllUsesOfValueWith(SDValue(Load, 0), Trunc);
DAG.ReplaceAllUsesOfValueWith(SDValue(Load, 1), SDValue(ExtLoad, 1));
deleteAndRecombine(Load);
AddToWorklist(Trunc.getNode());
}
SDValue DAGCombiner::PromoteOperand(SDValue Op, EVT PVT, bool &Replace) {
Replace = false;
SDLoc DL(Op);
if (ISD::isUNINDEXEDLoad(Op.getNode())) {
LoadSDNode *LD = cast<LoadSDNode>(Op);
EVT MemVT = LD->getMemoryVT();
ISD::LoadExtType ExtType = ISD::isNON_EXTLoad(LD) ? ISD::EXTLOAD
: LD->getExtensionType();
Replace = true;
return DAG.getExtLoad(ExtType, DL, PVT,
LD->getChain(), LD->getBasePtr(),
MemVT, LD->getMemOperand());
}
unsigned Opc = Op.getOpcode();
switch (Opc) {
default: break;
case ISD::AssertSext:
if (SDValue Op0 = SExtPromoteOperand(Op.getOperand(0), PVT))
return DAG.getNode(ISD::AssertSext, DL, PVT, Op0, Op.getOperand(1));
break;
case ISD::AssertZext:
if (SDValue Op0 = ZExtPromoteOperand(Op.getOperand(0), PVT))
return DAG.getNode(ISD::AssertZext, DL, PVT, Op0, Op.getOperand(1));
break;
case ISD::Constant: {
unsigned ExtOpc =
Op.getValueType().isByteSized() ? ISD::SIGN_EXTEND : ISD::ZERO_EXTEND;
return DAG.getNode(ExtOpc, DL, PVT, Op);
}
}
if (!TLI.isOperationLegal(ISD::ANY_EXTEND, PVT))
return SDValue();
return DAG.getNode(ISD::ANY_EXTEND, DL, PVT, Op);
}
SDValue DAGCombiner::SExtPromoteOperand(SDValue Op, EVT PVT) {
if (!TLI.isOperationLegal(ISD::SIGN_EXTEND_INREG, PVT))
return SDValue();
EVT OldVT = Op.getValueType();
SDLoc DL(Op);
bool Replace = false;
SDValue NewOp = PromoteOperand(Op, PVT, Replace);
if (!NewOp.getNode())
return SDValue();
AddToWorklist(NewOp.getNode());
if (Replace)
ReplaceLoadWithPromotedLoad(Op.getNode(), NewOp.getNode());
return DAG.getNode(ISD::SIGN_EXTEND_INREG, DL, NewOp.getValueType(), NewOp,
DAG.getValueType(OldVT));
}
SDValue DAGCombiner::ZExtPromoteOperand(SDValue Op, EVT PVT) {
EVT OldVT = Op.getValueType();
SDLoc DL(Op);
bool Replace = false;
SDValue NewOp = PromoteOperand(Op, PVT, Replace);
if (!NewOp.getNode())
return SDValue();
AddToWorklist(NewOp.getNode());
if (Replace)
ReplaceLoadWithPromotedLoad(Op.getNode(), NewOp.getNode());
return DAG.getZeroExtendInReg(NewOp, DL, OldVT);
}
/// Promote the specified integer binary operation if the target indicates it is
/// beneficial. e.g. On x86, it's usually better to promote i16 operations to
/// i32 since i16 instructions are longer.
SDValue DAGCombiner::PromoteIntBinOp(SDValue Op) {
if (!LegalOperations)
return SDValue();
EVT VT = Op.getValueType();
if (VT.isVector() || !VT.isInteger())
return SDValue();
// If operation type is 'undesirable', e.g. i16 on x86, consider
// promoting it.
unsigned Opc = Op.getOpcode();
if (TLI.isTypeDesirableForOp(Opc, VT))
return SDValue();
EVT PVT = VT;
// Consult target whether it is a good idea to promote this operation and
// what's the right type to promote it to.
if (TLI.IsDesirableToPromoteOp(Op, PVT)) {
assert(PVT != VT && "Don't know what type to promote to!");
LLVM_DEBUG(dbgs() << "\nPromoting "; Op.getNode()->dump(&DAG));
bool Replace0 = false;
SDValue N0 = Op.getOperand(0);
SDValue NN0 = PromoteOperand(N0, PVT, Replace0);
bool Replace1 = false;
SDValue N1 = Op.getOperand(1);
SDValue NN1 = PromoteOperand(N1, PVT, Replace1);
SDLoc DL(Op);
SDValue RV =
DAG.getNode(ISD::TRUNCATE, DL, VT, DAG.getNode(Opc, DL, PVT, NN0, NN1));
// We are always replacing N0/N1's use in N and only need
// additional replacements if there are additional uses.
Replace0 &= !N0->hasOneUse();
Replace1 &= (N0 != N1) && !N1->hasOneUse();
// Combine Op here so it is preserved past replacements.
CombineTo(Op.getNode(), RV);
// If operands have a use ordering, make sure we deal with
// predecessor first.
if (Replace0 && Replace1 && N0.getNode()->isPredecessorOf(N1.getNode())) {
std::swap(N0, N1);
std::swap(NN0, NN1);
}
if (Replace0) {
AddToWorklist(NN0.getNode());
ReplaceLoadWithPromotedLoad(N0.getNode(), NN0.getNode());
}
if (Replace1) {
AddToWorklist(NN1.getNode());
ReplaceLoadWithPromotedLoad(N1.getNode(), NN1.getNode());
}
return Op;
}
return SDValue();
}
/// Promote the specified integer shift operation if the target indicates it is
/// beneficial. e.g. On x86, it's usually better to promote i16 operations to
/// i32 since i16 instructions are longer.
SDValue DAGCombiner::PromoteIntShiftOp(SDValue Op) {
if (!LegalOperations)
return SDValue();
EVT VT = Op.getValueType();
if (VT.isVector() || !VT.isInteger())
return SDValue();
// If operation type is 'undesirable', e.g. i16 on x86, consider
// promoting it.
unsigned Opc = Op.getOpcode();
if (TLI.isTypeDesirableForOp(Opc, VT))
return SDValue();
EVT PVT = VT;
// Consult target whether it is a good idea to promote this operation and
// what's the right type to promote it to.
if (TLI.IsDesirableToPromoteOp(Op, PVT)) {
assert(PVT != VT && "Don't know what type to promote to!");
LLVM_DEBUG(dbgs() << "\nPromoting "; Op.getNode()->dump(&DAG));
bool Replace = false;
SDValue N0 = Op.getOperand(0);
SDValue N1 = Op.getOperand(1);
if (Opc == ISD::SRA)
N0 = SExtPromoteOperand(N0, PVT);
else if (Opc == ISD::SRL)
N0 = ZExtPromoteOperand(N0, PVT);
else
N0 = PromoteOperand(N0, PVT, Replace);
if (!N0.getNode())
return SDValue();
SDLoc DL(Op);
SDValue RV =
DAG.getNode(ISD::TRUNCATE, DL, VT, DAG.getNode(Opc, DL, PVT, N0, N1));
AddToWorklist(N0.getNode());
if (Replace)
ReplaceLoadWithPromotedLoad(Op.getOperand(0).getNode(), N0.getNode());
// Deal with Op being deleted.
if (Op && Op.getOpcode() != ISD::DELETED_NODE)
return RV;
}
return SDValue();
}
SDValue DAGCombiner::PromoteExtend(SDValue Op) {
if (!LegalOperations)
return SDValue();
EVT VT = Op.getValueType();
if (VT.isVector() || !VT.isInteger())
return SDValue();
// If operation type is 'undesirable', e.g. i16 on x86, consider
// promoting it.
unsigned Opc = Op.getOpcode();
if (TLI.isTypeDesirableForOp(Opc, VT))
return SDValue();
EVT PVT = VT;
// Consult target whether it is a good idea to promote this operation and
// what's the right type to promote it to.
if (TLI.IsDesirableToPromoteOp(Op, PVT)) {
assert(PVT != VT && "Don't know what type to promote to!");
// fold (aext (aext x)) -> (aext x)
// fold (aext (zext x)) -> (zext x)
// fold (aext (sext x)) -> (sext x)
LLVM_DEBUG(dbgs() << "\nPromoting "; Op.getNode()->dump(&DAG));
return DAG.getNode(Op.getOpcode(), SDLoc(Op), VT, Op.getOperand(0));
}
return SDValue();
}
bool DAGCombiner::PromoteLoad(SDValue Op) {
if (!LegalOperations)
return false;
if (!ISD::isUNINDEXEDLoad(Op.getNode()))
return false;
EVT VT = Op.getValueType();
if (VT.isVector() || !VT.isInteger())
return false;
// If operation type is 'undesirable', e.g. i16 on x86, consider
// promoting it.
unsigned Opc = Op.getOpcode();
if (TLI.isTypeDesirableForOp(Opc, VT))
return false;
EVT PVT = VT;
// Consult target whether it is a good idea to promote this operation and
// what's the right type to promote it to.
if (TLI.IsDesirableToPromoteOp(Op, PVT)) {
assert(PVT != VT && "Don't know what type to promote to!");
SDLoc DL(Op);
SDNode *N = Op.getNode();
LoadSDNode *LD = cast<LoadSDNode>(N);
EVT MemVT = LD->getMemoryVT();
ISD::LoadExtType ExtType = ISD::isNON_EXTLoad(LD) ? ISD::EXTLOAD
: LD->getExtensionType();
SDValue NewLD = DAG.getExtLoad(ExtType, DL, PVT,
LD->getChain(), LD->getBasePtr(),
MemVT, LD->getMemOperand());
SDValue Result = DAG.getNode(ISD::TRUNCATE, DL, VT, NewLD);
LLVM_DEBUG(dbgs() << "\nPromoting "; N->dump(&DAG); dbgs() << "\nTo: ";
Result.getNode()->dump(&DAG); dbgs() << '\n');
WorklistRemover DeadNodes(*this);
DAG.ReplaceAllUsesOfValueWith(SDValue(N, 0), Result);
DAG.ReplaceAllUsesOfValueWith(SDValue(N, 1), NewLD.getValue(1));
deleteAndRecombine(N);
AddToWorklist(Result.getNode());
return true;
}
return false;
}
/// Recursively delete a node which has no uses and any operands for
/// which it is the only use.
///
/// Note that this both deletes the nodes and removes them from the worklist.
/// It also adds any nodes who have had a user deleted to the worklist as they
/// may now have only one use and subject to other combines.
bool DAGCombiner::recursivelyDeleteUnusedNodes(SDNode *N) {
if (!N->use_empty())
return false;
SmallSetVector<SDNode *, 16> Nodes;
Nodes.insert(N);
do {
N = Nodes.pop_back_val();
if (!N)
continue;
if (N->use_empty()) {
for (const SDValue &ChildN : N->op_values())
Nodes.insert(ChildN.getNode());
removeFromWorklist(N);
DAG.DeleteNode(N);
} else {
AddToWorklist(N);
}
} while (!Nodes.empty());
return true;
}
//===----------------------------------------------------------------------===//
// Main DAG Combiner implementation
//===----------------------------------------------------------------------===//
void DAGCombiner::Run(CombineLevel AtLevel) {
// set the instance variables, so that the various visit routines may use it.
Level = AtLevel;
LegalOperations = Level >= AfterLegalizeVectorOps;
LegalTypes = Level >= AfterLegalizeTypes;
// Add all the dag nodes to the worklist.
for (SDNode &Node : DAG.allnodes())
AddToWorklist(&Node);
// Create a dummy node (which is not added to allnodes), that adds a reference
// to the root node, preventing it from being deleted, and tracking any
// changes of the root.
HandleSDNode Dummy(DAG.getRoot());
// While the worklist isn't empty, find a node and try to combine it.
while (!WorklistMap.empty()) {
SDNode *N;
// The Worklist holds the SDNodes in order, but it may contain null entries.
do {
N = Worklist.pop_back_val();
} while (!N);
bool GoodWorklistEntry = WorklistMap.erase(N);
(void)GoodWorklistEntry;
assert(GoodWorklistEntry &&
"Found a worklist entry without a corresponding map entry!");
// If N has no uses, it is dead. Make sure to revisit all N's operands once
// N is deleted from the DAG, since they too may now be dead or may have a
// reduced number of uses, allowing other xforms.
if (recursivelyDeleteUnusedNodes(N))
continue;
WorklistRemover DeadNodes(*this);
// If this combine is running after legalizing the DAG, re-legalize any
// nodes pulled off the worklist.
if (Level == AfterLegalizeDAG) {
SmallSetVector<SDNode *, 16> UpdatedNodes;
bool NIsValid = DAG.LegalizeOp(N, UpdatedNodes);
for (SDNode *LN : UpdatedNodes) {
AddToWorklist(LN);
AddUsersToWorklist(LN);
}
if (!NIsValid)
continue;
}
LLVM_DEBUG(dbgs() << "\nCombining: "; N->dump(&DAG));
// Add any operands of the new node which have not yet been combined to the
// worklist as well. Because the worklist uniques things already, this
// won't repeatedly process the same operand.
CombinedNodes.insert(N);
for (const SDValue &ChildN : N->op_values())
if (!CombinedNodes.count(ChildN.getNode()))
AddToWorklist(ChildN.getNode());
SDValue RV = combine(N);
if (!RV.getNode())
continue;
++NodesCombined;
// If we get back the same node we passed in, rather than a new node or
// zero, we know that the node must have defined multiple values and
// CombineTo was used. Since CombineTo takes care of the worklist
// mechanics for us, we have no work to do in this case.
if (RV.getNode() == N)
continue;
assert(N->getOpcode() != ISD::DELETED_NODE &&
RV.getOpcode() != ISD::DELETED_NODE &&
"Node was deleted but visit returned new node!");
LLVM_DEBUG(dbgs() << " ... into: "; RV.getNode()->dump(&DAG));
if (N->getNumValues() == RV.getNode()->getNumValues())
DAG.ReplaceAllUsesWith(N, RV.getNode());
else {
assert(N->getValueType(0) == RV.getValueType() &&
N->getNumValues() == 1 && "Type mismatch");
DAG.ReplaceAllUsesWith(N, &RV);
}
// Push the new node and any users onto the worklist
AddToWorklist(RV.getNode());
AddUsersToWorklist(RV.getNode());
// Finally, if the node is now dead, remove it from the graph. The node
// may not be dead if the replacement process recursively simplified to
// something else needing this node. This will also take care of adding any
// operands which have lost a user to the worklist.
recursivelyDeleteUnusedNodes(N);
}
// If the root changed (e.g. it was a dead load, update the root).
DAG.setRoot(Dummy.getValue());
DAG.RemoveDeadNodes();
}
SDValue DAGCombiner::visit(SDNode *N) {
switch (N->getOpcode()) {
default: break;
case ISD::TokenFactor: return visitTokenFactor(N);
case ISD::MERGE_VALUES: return visitMERGE_VALUES(N);
case ISD::ADD: return visitADD(N);
case ISD::SUB: return visitSUB(N);
case ISD::ADDC: return visitADDC(N);
case ISD::UADDO: return visitUADDO(N);
case ISD::SUBC: return visitSUBC(N);
case ISD::USUBO: return visitUSUBO(N);
case ISD::ADDE: return visitADDE(N);
case ISD::ADDCARRY: return visitADDCARRY(N);
case ISD::SUBE: return visitSUBE(N);
case ISD::SUBCARRY: return visitSUBCARRY(N);
case ISD::MUL: return visitMUL(N);
case ISD::SDIV: return visitSDIV(N);
case ISD::UDIV: return visitUDIV(N);
case ISD::SREM:
case ISD::UREM: return visitREM(N);
case ISD::MULHU: return visitMULHU(N);
case ISD::MULHS: return visitMULHS(N);
case ISD::SMUL_LOHI: return visitSMUL_LOHI(N);
case ISD::UMUL_LOHI: return visitUMUL_LOHI(N);
case ISD::SMULO: return visitSMULO(N);
case ISD::UMULO: return visitUMULO(N);
case ISD::SMIN:
case ISD::SMAX:
case ISD::UMIN:
case ISD::UMAX: return visitIMINMAX(N);
case ISD::AND: return visitAND(N);
case ISD::OR: return visitOR(N);
case ISD::XOR: return visitXOR(N);
case ISD::SHL: return visitSHL(N);
case ISD::SRA: return visitSRA(N);
case ISD::SRL: return visitSRL(N);
case ISD::ROTR:
case ISD::ROTL: return visitRotate(N);
case ISD::FSHL:
case ISD::FSHR: return visitFunnelShift(N);
case ISD::ABS: return visitABS(N);
case ISD::BSWAP: return visitBSWAP(N);
case ISD::BITREVERSE: return visitBITREVERSE(N);
case ISD::CTLZ: return visitCTLZ(N);
case ISD::CTLZ_ZERO_UNDEF: return visitCTLZ_ZERO_UNDEF(N);
case ISD::CTTZ: return visitCTTZ(N);
case ISD::CTTZ_ZERO_UNDEF: return visitCTTZ_ZERO_UNDEF(N);
case ISD::CTPOP: return visitCTPOP(N);
case ISD::SELECT: return visitSELECT(N);
case ISD::VSELECT: return visitVSELECT(N);
case ISD::SELECT_CC: return visitSELECT_CC(N);
case ISD::SETCC: return visitSETCC(N);
case ISD::SETCCCARRY: return visitSETCCCARRY(N);
case ISD::SIGN_EXTEND: return visitSIGN_EXTEND(N);
case ISD::ZERO_EXTEND: return visitZERO_EXTEND(N);
case ISD::ANY_EXTEND: return visitANY_EXTEND(N);
case ISD::AssertSext:
case ISD::AssertZext: return visitAssertExt(N);
case ISD::SIGN_EXTEND_INREG: return visitSIGN_EXTEND_INREG(N);
case ISD::SIGN_EXTEND_VECTOR_INREG: return visitSIGN_EXTEND_VECTOR_INREG(N);
case ISD::ZERO_EXTEND_VECTOR_INREG: return visitZERO_EXTEND_VECTOR_INREG(N);
case ISD::TRUNCATE: return visitTRUNCATE(N);
case ISD::BITCAST: return visitBITCAST(N);
case ISD::BUILD_PAIR: return visitBUILD_PAIR(N);
case ISD::FADD: return visitFADD(N);
case ISD::FSUB: return visitFSUB(N);
case ISD::FMUL: return visitFMUL(N);
case ISD::FMA: return visitFMA(N);
case ISD::FDIV: return visitFDIV(N);
case ISD::FREM: return visitFREM(N);
case ISD::FSQRT: return visitFSQRT(N);
case ISD::FCOPYSIGN: return visitFCOPYSIGN(N);
case ISD::FPOW: return visitFPOW(N);
case ISD::SINT_TO_FP: return visitSINT_TO_FP(N);
case ISD::UINT_TO_FP: return visitUINT_TO_FP(N);
case ISD::FP_TO_SINT: return visitFP_TO_SINT(N);
case ISD::FP_TO_UINT: return visitFP_TO_UINT(N);
case ISD::FP_ROUND: return visitFP_ROUND(N);
case ISD::FP_ROUND_INREG: return visitFP_ROUND_INREG(N);
case ISD::FP_EXTEND: return visitFP_EXTEND(N);
case ISD::FNEG: return visitFNEG(N);
case ISD::FABS: return visitFABS(N);
case ISD::FFLOOR: return visitFFLOOR(N);
case ISD::FMINNUM: return visitFMINNUM(N);
case ISD::FMAXNUM: return visitFMAXNUM(N);
case ISD::FMINIMUM: return visitFMINIMUM(N);
case ISD::FMAXIMUM: return visitFMAXIMUM(N);
case ISD::FCEIL: return visitFCEIL(N);
case ISD::FTRUNC: return visitFTRUNC(N);
case ISD::BRCOND: return visitBRCOND(N);
case ISD::BR_CC: return visitBR_CC(N);
case ISD::LOAD: return visitLOAD(N);
case ISD::STORE: return visitSTORE(N);
case ISD::INSERT_VECTOR_ELT: return visitINSERT_VECTOR_ELT(N);
case ISD::EXTRACT_VECTOR_ELT: return visitEXTRACT_VECTOR_ELT(N);
case ISD::BUILD_VECTOR: return visitBUILD_VECTOR(N);
case ISD::CONCAT_VECTORS: return visitCONCAT_VECTORS(N);
case ISD::EXTRACT_SUBVECTOR: return visitEXTRACT_SUBVECTOR(N);
case ISD::VECTOR_SHUFFLE: return visitVECTOR_SHUFFLE(N);
case ISD::SCALAR_TO_VECTOR: return visitSCALAR_TO_VECTOR(N);
case ISD::INSERT_SUBVECTOR: return visitINSERT_SUBVECTOR(N);
case ISD::MGATHER: return visitMGATHER(N);
case ISD::MLOAD: return visitMLOAD(N);
case ISD::MSCATTER: return visitMSCATTER(N);
case ISD::MSTORE: return visitMSTORE(N);
case ISD::FP_TO_FP16: return visitFP_TO_FP16(N);
case ISD::FP16_TO_FP: return visitFP16_TO_FP(N);
}
return SDValue();
}
SDValue DAGCombiner::combine(SDNode *N) {
SDValue RV = visit(N);
// If nothing happened, try a target-specific DAG combine.
if (!RV.getNode()) {
assert(N->getOpcode() != ISD::DELETED_NODE &&
"Node was deleted but visit returned NULL!");
if (N->getOpcode() >= ISD::BUILTIN_OP_END ||
TLI.hasTargetDAGCombine((ISD::NodeType)N->getOpcode())) {
// Expose the DAG combiner to the target combiner impls.
TargetLowering::DAGCombinerInfo
DagCombineInfo(DAG, Level, false, this);
RV = TLI.PerformDAGCombine(N, DagCombineInfo);
}
}
// If nothing happened still, try promoting the operation.
if (!RV.getNode()) {
switch (N->getOpcode()) {
default: break;
case ISD::ADD:
case ISD::SUB:
case ISD::MUL:
case ISD::AND:
case ISD::OR:
case ISD::XOR:
RV = PromoteIntBinOp(SDValue(N, 0));
break;
case ISD::SHL:
case ISD::SRA:
case ISD::SRL:
RV = PromoteIntShiftOp(SDValue(N, 0));
break;
case ISD::SIGN_EXTEND:
case ISD::ZERO_EXTEND:
case ISD::ANY_EXTEND:
RV = PromoteExtend(SDValue(N, 0));
break;
case ISD::LOAD:
if (PromoteLoad(SDValue(N, 0)))
RV = SDValue(N, 0);
break;
}
}
// If N is a commutative binary node, try eliminate it if the commuted
// version is already present in the DAG.
if (!RV.getNode() && TLI.isCommutativeBinOp(N->getOpcode()) &&
N->getNumValues() == 1) {
SDValue N0 = N->getOperand(0);
SDValue N1 = N->getOperand(1);
// Constant operands are canonicalized to RHS.
if (N0 != N1 && (isa<ConstantSDNode>(N0) || !isa<ConstantSDNode>(N1))) {
SDValue Ops[] = {N1, N0};
SDNode *CSENode = DAG.getNodeIfExists(N->getOpcode(), N->getVTList(), Ops,
N->getFlags());
if (CSENode)
return SDValue(CSENode, 0);
}
}
return RV;
}
/// Given a node, return its input chain if it has one, otherwise return a null
/// sd operand.
static SDValue getInputChainForNode(SDNode *N) {
if (unsigned NumOps = N->getNumOperands()) {
if (N->getOperand(0).getValueType() == MVT::Other)
return N->getOperand(0);
if (N->getOperand(NumOps-1).getValueType() == MVT::Other)
return N->getOperand(NumOps-1);
for (unsigned i = 1; i < NumOps-1; ++i)
if (N->getOperand(i).getValueType() == MVT::Other)
return N->getOperand(i);
}
return SDValue();
}
SDValue DAGCombiner::visitTokenFactor(SDNode *N) {
// If N has two operands, where one has an input chain equal to the other,
// the 'other' chain is redundant.
if (N->getNumOperands() == 2) {
if (getInputChainForNode(N->getOperand(0).getNode()) == N->getOperand(1))
return N->getOperand(0);
if (getInputChainForNode(N->getOperand(1).getNode()) == N->getOperand(0))
return N->getOperand(1);
}
// Don't simplify token factors if optnone.
if (OptLevel == CodeGenOpt::None)
return SDValue();
SmallVector<SDNode *, 8> TFs; // List of token factors to visit.
SmallVector<SDValue, 8> Ops; // Ops for replacing token factor.
SmallPtrSet<SDNode*, 16> SeenOps;
bool Changed = false; // If we should replace this token factor.
// Start out with this token factor.
TFs.push_back(N);
// Iterate through token factors. The TFs grows when new token factors are
// encountered.
for (unsigned i = 0; i < TFs.size(); ++i) {
SDNode *TF = TFs[i];
// Check each of the operands.
for (const SDValue &Op : TF->op_values()) {
switch (Op.getOpcode()) {
case ISD::EntryToken:
// Entry tokens don't need to be added to the list. They are
// redundant.
Changed = true;
break;
case ISD::TokenFactor:
if (Op.hasOneUse() && !is_contained(TFs, Op.getNode())) {
// Queue up for processing.
TFs.push_back(Op.getNode());
// Clean up in case the token factor is removed.
AddToWorklist(Op.getNode());
Changed = true;
break;
}
LLVM_FALLTHROUGH;
default:
// Only add if it isn't already in the list.
if (SeenOps.insert(Op.getNode()).second)
Ops.push_back(Op);
else
Changed = true;
break;
}
}
}
// Remove Nodes that are chained to another node in the list. Do so
// by walking up chains breath-first stopping when we've seen
// another operand. In general we must climb to the EntryNode, but we can exit
// early if we find all remaining work is associated with just one operand as
// no further pruning is possible.
// List of nodes to search through and original Ops from which they originate.
SmallVector<std::pair<SDNode *, unsigned>, 8> Worklist;
SmallVector<unsigned, 8> OpWorkCount; // Count of work for each Op.
SmallPtrSet<SDNode *, 16> SeenChains;
bool DidPruneOps = false;
unsigned NumLeftToConsider = 0;
for (const SDValue &Op : Ops) {
Worklist.push_back(std::make_pair(Op.getNode(), NumLeftToConsider++));
OpWorkCount.push_back(1);
}
auto AddToWorklist = [&](unsigned CurIdx, SDNode *Op, unsigned OpNumber) {
// If this is an Op, we can remove the op from the list. Remark any
// search associated with it as from the current OpNumber.
if (SeenOps.count(Op) != 0) {
Changed = true;
DidPruneOps = true;
unsigned OrigOpNumber = 0;
while (OrigOpNumber < Ops.size() && Ops[OrigOpNumber].getNode() != Op)
OrigOpNumber++;
assert((OrigOpNumber != Ops.size()) &&
"expected to find TokenFactor Operand");
// Re-mark worklist from OrigOpNumber to OpNumber
for (unsigned i = CurIdx + 1; i < Worklist.size(); ++i) {
if (Worklist[i].second == OrigOpNumber) {
Worklist[i].second = OpNumber;
}
}
OpWorkCount[OpNumber] += OpWorkCount[OrigOpNumber];
OpWorkCount[OrigOpNumber] = 0;
NumLeftToConsider--;
}
// Add if it's a new chain
if (SeenChains.insert(Op).second) {
OpWorkCount[OpNumber]++;
Worklist.push_back(std::make_pair(Op, OpNumber));
}
};
for (unsigned i = 0; i < Worklist.size() && i < 1024; ++i) {
// We need at least be consider at least 2 Ops to prune.
if (NumLeftToConsider <= 1)
break;
auto CurNode = Worklist[i].first;
auto CurOpNumber = Worklist[i].second;
assert((OpWorkCount[CurOpNumber] > 0) &&
"Node should not appear in worklist");
switch (CurNode->getOpcode()) {
case ISD::EntryToken:
// Hitting EntryToken is the only way for the search to terminate without
// hitting
// another operand's search. Prevent us from marking this operand
// considered.
NumLeftToConsider++;
break;
case ISD::TokenFactor:
for (const SDValue &Op : CurNode->op_values())
AddToWorklist(i, Op.getNode(), CurOpNumber);
break;
case ISD::CopyFromReg:
case ISD::CopyToReg:
AddToWorklist(i, CurNode->getOperand(0).getNode(), CurOpNumber);
break;
default:
if (auto *MemNode = dyn_cast<MemSDNode>(CurNode))
AddToWorklist(i, MemNode->getChain().getNode(), CurOpNumber);
break;
}
OpWorkCount[CurOpNumber]--;
if (OpWorkCount[CurOpNumber] == 0)
NumLeftToConsider--;
}
// If we've changed things around then replace token factor.
if (Changed) {
SDValue Result;
if (Ops.empty()) {
// The entry token is the only possible outcome.
Result = DAG.getEntryNode();
} else {
if (DidPruneOps) {
SmallVector<SDValue, 8> PrunedOps;
//
for (const SDValue &Op : Ops) {
if (SeenChains.count(Op.getNode()) == 0)
PrunedOps.push_back(Op);
}
Result = DAG.getNode(ISD::TokenFactor, SDLoc(N), MVT::Other, PrunedOps);
} else {
Result = DAG.getNode(ISD::TokenFactor, SDLoc(N), MVT::Other, Ops);
}
}
return Result;
}
return SDValue();
}
/// MERGE_VALUES can always be eliminated.
SDValue DAGCombiner::visitMERGE_VALUES(SDNode *N) {
WorklistRemover DeadNodes(*this);
// Replacing results may cause a different MERGE_VALUES to suddenly
// be CSE'd with N, and carry its uses with it. Iterate until no
// uses remain, to ensure that the node can be safely deleted.
// First add the users of this node to the work list so that they
// can be tried again once they have new operands.
AddUsersToWorklist(N);
do {
// Do as a single replacement to avoid rewalking use lists.
SmallVector<SDValue, 8> Ops;
for (unsigned i = 0, e = N->getNumOperands(); i != e; ++i)
Ops.push_back(N->getOperand(i));
DAG.ReplaceAllUsesWith(N, Ops.data());
} while (!N->use_empty());
deleteAndRecombine(N);
return SDValue(N, 0); // Return N so it doesn't get rechecked!
}
/// If \p N is a ConstantSDNode with isOpaque() == false return it casted to a
/// ConstantSDNode pointer else nullptr.
static ConstantSDNode *getAsNonOpaqueConstant(SDValue N) {
ConstantSDNode *Const = dyn_cast<ConstantSDNode>(N);
return Const != nullptr && !Const->isOpaque() ? Const : nullptr;
}
SDValue DAGCombiner::foldBinOpIntoSelect(SDNode *BO) {
assert(ISD::isBinaryOp(BO) && "Unexpected binary operator");
// Don't do this unless the old select is going away. We want to eliminate the
// binary operator, not replace a binop with a select.
// TODO: Handle ISD::SELECT_CC.
unsigned SelOpNo = 0;
SDValue Sel = BO->getOperand(0);
if (Sel.getOpcode() != ISD::SELECT || !Sel.hasOneUse()) {
SelOpNo = 1;
Sel = BO->getOperand(1);
}
if (Sel.getOpcode() != ISD::SELECT || !Sel.hasOneUse())
return SDValue();
SDValue CT = Sel.getOperand(1);
if (!isConstantOrConstantVector(CT, true) &&
!isConstantFPBuildVectorOrConstantFP(CT))
return SDValue();
SDValue CF = Sel.getOperand(2);
if (!isConstantOrConstantVector(CF, true) &&
!isConstantFPBuildVectorOrConstantFP(CF))
return SDValue();
// Bail out if any constants are opaque because we can't constant fold those.
// The exception is "and" and "or" with either 0 or -1 in which case we can
// propagate non constant operands into select. I.e.:
// and (select Cond, 0, -1), X --> select Cond, 0, X
// or X, (select Cond, -1, 0) --> select Cond, -1, X
auto BinOpcode = BO->getOpcode();
bool CanFoldNonConst =
(BinOpcode == ISD::AND || BinOpcode == ISD::OR) &&
(isNullOrNullSplat(CT) || isAllOnesOrAllOnesSplat(CT)) &&
(isNullOrNullSplat(CF) || isAllOnesOrAllOnesSplat(CF));
SDValue CBO = BO->getOperand(SelOpNo ^ 1);
if (!CanFoldNonConst &&
!isConstantOrConstantVector(CBO, true) &&
!isConstantFPBuildVectorOrConstantFP(CBO))
return SDValue();
EVT VT = Sel.getValueType();
// In case of shift value and shift amount may have different VT. For instance
// on x86 shift amount is i8 regardles of LHS type. Bail out if we have
// swapped operands and value types do not match. NB: x86 is fine if operands
// are not swapped with shift amount VT being not bigger than shifted value.
// TODO: that is possible to check for a shift operation, correct VTs and
// still perform optimization on x86 if needed.
if (SelOpNo && VT != CBO.getValueType())
return SDValue();
// We have a select-of-constants followed by a binary operator with a
// constant. Eliminate the binop by pulling the constant math into the select.
// Example: add (select Cond, CT, CF), CBO --> select Cond, CT + CBO, CF + CBO
SDLoc DL(Sel);
SDValue NewCT = SelOpNo ? DAG.getNode(BinOpcode, DL, VT, CBO, CT)
: DAG.getNode(BinOpcode, DL, VT, CT, CBO);
if (!CanFoldNonConst && !NewCT.isUndef() &&
!isConstantOrConstantVector(NewCT, true) &&
!isConstantFPBuildVectorOrConstantFP(NewCT))
return SDValue();
SDValue NewCF = SelOpNo ? DAG.getNode(BinOpcode, DL, VT, CBO, CF)
: DAG.getNode(BinOpcode, DL, VT, CF, CBO);
if (!CanFoldNonConst && !NewCF.isUndef() &&
!isConstantOrConstantVector(NewCF, true) &&
!isConstantFPBuildVectorOrConstantFP(NewCF))
return SDValue();
return DAG.getSelect(DL, VT, Sel.getOperand(0), NewCT, NewCF);
}
static SDValue foldAddSubBoolOfMaskedVal(SDNode *N, SelectionDAG &DAG) {
assert((N->getOpcode() == ISD::ADD || N->getOpcode() == ISD::SUB) &&
"Expecting add or sub");
// Match a constant operand and a zext operand for the math instruction:
// add Z, C
// sub C, Z
bool IsAdd = N->getOpcode() == ISD::ADD;
SDValue C = IsAdd ? N->getOperand(1) : N->getOperand(0);
SDValue Z = IsAdd ? N->getOperand(0) : N->getOperand(1);
auto *CN = dyn_cast<ConstantSDNode>(C);
if (!CN || Z.getOpcode() != ISD::ZERO_EXTEND)
return SDValue();
// Match the zext operand as a setcc of a boolean.
if (Z.getOperand(0).getOpcode() != ISD::SETCC ||
Z.getOperand(0).getValueType() != MVT::i1)
return SDValue();
// Match the compare as: setcc (X & 1), 0, eq.
SDValue SetCC = Z.getOperand(0);
ISD::CondCode CC = cast<CondCodeSDNode>(SetCC->getOperand(2))->get();
if (CC != ISD::SETEQ || !isNullConstant(SetCC.getOperand(1)) ||
SetCC.getOperand(0).getOpcode() != ISD::AND ||
!isOneConstant(SetCC.getOperand(0).getOperand(1)))
return SDValue();
// We are adding/subtracting a constant and an inverted low bit. Turn that
// into a subtract/add of the low bit with incremented/decremented constant:
// add (zext i1 (seteq (X & 1), 0)), C --> sub C+1, (zext (X & 1))
// sub C, (zext i1 (seteq (X & 1), 0)) --> add C-1, (zext (X & 1))
EVT VT = C.getValueType();
SDLoc DL(N);
SDValue LowBit = DAG.getZExtOrTrunc(SetCC.getOperand(0), DL, VT);
SDValue C1 = IsAdd ? DAG.getConstant(CN->getAPIntValue() + 1, DL, VT) :
DAG.getConstant(CN->getAPIntValue() - 1, DL, VT);
return DAG.getNode(IsAdd ? ISD::SUB : ISD::ADD, DL, VT, C1, LowBit);
}
/// Try to fold a 'not' shifted sign-bit with add/sub with constant operand into
/// a shift and add with a different constant.
static SDValue foldAddSubOfSignBit(SDNode *N, SelectionDAG &DAG) {
assert((N->getOpcode() == ISD::ADD || N->getOpcode() == ISD::SUB) &&
"Expecting add or sub");
// We need a constant operand for the add/sub, and the other operand is a
// logical shift right: add (srl), C or sub C, (srl).
bool IsAdd = N->getOpcode() == ISD::ADD;
SDValue ConstantOp = IsAdd ? N->getOperand(1) : N->getOperand(0);
SDValue ShiftOp = IsAdd ? N->getOperand(0) : N->getOperand(1);
ConstantSDNode *C = isConstOrConstSplat(ConstantOp);
if (!C || ShiftOp.getOpcode() != ISD::SRL)
return SDValue();
// The shift must be of a 'not' value.
SDValue Not = ShiftOp.getOperand(0);
if (!Not.hasOneUse() || !isBitwiseNot(Not))
return SDValue();
// The shift must be moving the sign bit to the least-significant-bit.
EVT VT = ShiftOp.getValueType();
SDValue ShAmt = ShiftOp.getOperand(1);
ConstantSDNode *ShAmtC = isConstOrConstSplat(ShAmt);
if (!ShAmtC || ShAmtC->getZExtValue() != VT.getScalarSizeInBits() - 1)
return SDValue();
// Eliminate the 'not' by adjusting the shift and add/sub constant:
// add (srl (not X), 31), C --> add (sra X, 31), (C + 1)
// sub C, (srl (not X), 31) --> add (srl X, 31), (C - 1)
SDLoc DL(N);
auto ShOpcode = IsAdd ? ISD::SRA : ISD::SRL;
SDValue NewShift = DAG.getNode(ShOpcode, DL, VT, Not.getOperand(0), ShAmt);
APInt NewC = IsAdd ? C->getAPIntValue() + 1 : C->getAPIntValue() - 1;
return DAG.getNode(ISD::ADD, DL, VT, NewShift, DAG.getConstant(NewC, DL, VT));
}
SDValue DAGCombiner::visitADD(SDNode *N) {
SDValue N0 = N->getOperand(0);
SDValue N1 = N->getOperand(1);
EVT VT = N0.getValueType();
SDLoc DL(N);
// fold vector ops
if (VT.isVector()) {
if (SDValue FoldedVOp = SimplifyVBinOp(N))
return FoldedVOp;
// fold (add x, 0) -> x, vector edition
if (ISD::isBuildVectorAllZeros(N1.getNode()))
return N0;
if (ISD::isBuildVectorAllZeros(N0.getNode()))
return N1;
}
// fold (add x, undef) -> undef
if (N0.isUndef())
return N0;
if (N1.isUndef())
return N1;
if (DAG.isConstantIntBuildVectorOrConstantInt(N0)) {
// canonicalize constant to RHS
if (!DAG.isConstantIntBuildVectorOrConstantInt(N1))
return DAG.getNode(ISD::ADD, DL, VT, N1, N0);
// fold (add c1, c2) -> c1+c2
return DAG.FoldConstantArithmetic(ISD::ADD, DL, VT, N0.getNode(),
N1.getNode());
}
// fold (add x, 0) -> x
if (isNullConstant(N1))
return N0;
if (isConstantOrConstantVector(N1, /* NoOpaque */ true)) {
// fold ((c1-A)+c2) -> (c1+c2)-A
if (N0.getOpcode() == ISD::SUB &&
isConstantOrConstantVector(N0.getOperand(0), /* NoOpaque */ true)) {
// FIXME: Adding 2 constants should be handled by FoldConstantArithmetic.
return DAG.getNode(ISD::SUB, DL, VT,
DAG.getNode(ISD::ADD, DL, VT, N1, N0.getOperand(0)),
N0.getOperand(1));
}
// add (sext i1 X), 1 -> zext (not i1 X)
// We don't transform this pattern:
// add (zext i1 X), -1 -> sext (not i1 X)
// because most (?) targets generate better code for the zext form.
if (N0.getOpcode() == ISD::SIGN_EXTEND && N0.hasOneUse() &&
isOneOrOneSplat(N1)) {
SDValue X = N0.getOperand(0);
if ((!LegalOperations ||
(TLI.isOperationLegal(ISD::XOR, X.getValueType()) &&
TLI.isOperationLegal(ISD::ZERO_EXTEND, VT))) &&
X.getScalarValueSizeInBits() == 1) {
SDValue Not = DAG.getNOT(DL, X, X.getValueType());
return DAG.getNode(ISD::ZERO_EXTEND, DL, VT, Not);
}
}
// Undo the add -> or combine to merge constant offsets from a frame index.
if (N0.getOpcode() == ISD::OR &&
isa<FrameIndexSDNode>(N0.getOperand(0)) &&
isa<ConstantSDNode>(N0.getOperand(1)) &&
DAG.haveNoCommonBitsSet(N0.getOperand(0), N0.getOperand(1))) {
SDValue Add0 = DAG.getNode(ISD::ADD, DL, VT, N1, N0.getOperand(1));
return DAG.getNode(ISD::ADD, DL, VT, N0.getOperand(0), Add0);
}
}
if (SDValue NewSel = foldBinOpIntoSelect(N))
return NewSel;
// reassociate add
if (SDValue RADD = ReassociateOps(ISD::ADD, DL, N0, N1, N->getFlags()))
return RADD;
// fold ((0-A) + B) -> B-A
if (N0.getOpcode() == ISD::SUB && isNullOrNullSplat(N0.getOperand(0)))
return DAG.getNode(ISD::SUB, DL, VT, N1, N0.getOperand(1));
// fold (A + (0-B)) -> A-B
if (N1.getOpcode() == ISD::SUB && isNullOrNullSplat(N1.getOperand(0)))
return DAG.getNode(ISD::SUB, DL, VT, N0, N1.getOperand(1));
// fold (A+(B-A)) -> B
if (N1.getOpcode() == ISD::SUB && N0 == N1.getOperand(1))
return N1.getOperand(0);
// fold ((B-A)+A) -> B
if (N0.getOpcode() == ISD::SUB && N1 == N0.getOperand(1))
return N0.getOperand(0);
// fold (A+(B-(A+C))) to (B-C)
if (N1.getOpcode() == ISD::SUB && N1.getOperand(1).getOpcode() == ISD::ADD &&
N0 == N1.getOperand(1).getOperand(0))
return DAG.getNode(ISD::SUB, DL, VT, N1.getOperand(0),
N1.getOperand(1).getOperand(1));
// fold (A+(B-(C+A))) to (B-C)
if (N1.getOpcode() == ISD::SUB && N1.getOperand(1).getOpcode() == ISD::ADD &&
N0 == N1.getOperand(1).getOperand(1))
return DAG.getNode(ISD::SUB, DL, VT, N1.getOperand(0),
N1.getOperand(1).getOperand(0));
// fold (A+((B-A)+or-C)) to (B+or-C)
if ((N1.getOpcode() == ISD::SUB || N1.getOpcode() == ISD::ADD) &&
N1.getOperand(0).getOpcode() == ISD::SUB &&
N0 == N1.getOperand(0).getOperand(1))
return DAG.getNode(N1.getOpcode(), DL, VT, N1.getOperand(0).getOperand(0),
N1.getOperand(1));
// fold (A-B)+(C-D) to (A+C)-(B+D) when A or C is constant
if (N0.getOpcode() == ISD::SUB && N1.getOpcode() == ISD::SUB) {
SDValue N00 = N0.getOperand(0);
SDValue N01 = N0.getOperand(1);
SDValue N10 = N1.getOperand(0);
SDValue N11 = N1.getOperand(1);
if (isConstantOrConstantVector(N00) || isConstantOrConstantVector(N10))
return DAG.getNode(ISD::SUB, DL, VT,
DAG.getNode(ISD::ADD, SDLoc(N0), VT, N00, N10),
DAG.getNode(ISD::ADD, SDLoc(N1), VT, N01, N11));
}
if (SDValue V = foldAddSubBoolOfMaskedVal(N, DAG))
return V;
if (SDValue V = foldAddSubOfSignBit(N, DAG))
return V;
if (SimplifyDemandedBits(SDValue(N, 0)))
return SDValue(N, 0);
// fold (a+b) -> (a|b) iff a and b share no bits.
if ((!LegalOperations || TLI.isOperationLegal(ISD::OR, VT)) &&
DAG.haveNoCommonBitsSet(N0, N1))
return DAG.getNode(ISD::OR, DL, VT, N0, N1);
// fold (add (xor a, -1), 1) -> (sub 0, a)
if (isBitwiseNot(N0) && isOneOrOneSplat(N1))
return DAG.getNode(ISD::SUB, DL, VT, DAG.getConstant(0, DL, VT),
N0.getOperand(0));
if (SDValue Combined = visitADDLike(N0, N1, N))
return Combined;
if (SDValue Combined = visitADDLike(N1, N0, N))
return Combined;
return SDValue();
}
static SDValue getAsCarry(const TargetLowering &TLI, SDValue V) {
bool Masked = false;
// First, peel away TRUNCATE/ZERO_EXTEND/AND nodes due to legalization.
while (true) {
if (V.getOpcode() == ISD::TRUNCATE || V.getOpcode() == ISD::ZERO_EXTEND) {
V = V.getOperand(0);
continue;
}
if (V.getOpcode() == ISD::AND && isOneConstant(V.getOperand(1))) {
Masked = true;
V = V.getOperand(0);
continue;
}
break;
}
// If this is not a carry, return.
if (V.getResNo() != 1)
return SDValue();
if (V.getOpcode() != ISD::ADDCARRY && V.getOpcode() != ISD::SUBCARRY &&
V.getOpcode() != ISD::UADDO && V.getOpcode() != ISD::USUBO)
return SDValue();
// If the result is masked, then no matter what kind of bool it is we can
// return. If it isn't, then we need to make sure the bool type is either 0 or
// 1 and not other values.
if (Masked ||
TLI.getBooleanContents(V.getValueType()) ==
TargetLoweringBase::ZeroOrOneBooleanContent)
return V;
return SDValue();
}
SDValue DAGCombiner::visitADDLike(SDValue N0, SDValue N1, SDNode *LocReference) {
EVT VT = N0.getValueType();
SDLoc DL(LocReference);
// fold (add x, shl(0 - y, n)) -> sub(x, shl(y, n))
if (N1.getOpcode() == ISD::SHL && N1.getOperand(0).getOpcode() == ISD::SUB &&
isNullOrNullSplat(N1.getOperand(0).getOperand(0)))
return DAG.getNode(ISD::SUB, DL, VT, N0,
DAG.getNode(ISD::SHL, DL, VT,
N1.getOperand(0).getOperand(1),
N1.getOperand(1)));
if (N1.getOpcode() == ISD::AND) {
SDValue AndOp0 = N1.getOperand(0);
unsigned NumSignBits = DAG.ComputeNumSignBits(AndOp0);
unsigned DestBits = VT.getScalarSizeInBits();
// (add z, (and (sbbl x, x), 1)) -> (sub z, (sbbl x, x))
// and similar xforms where the inner op is either ~0 or 0.
if (NumSignBits == DestBits && isOneOrOneSplat(N1->getOperand(1)))
return DAG.getNode(ISD::SUB, DL, VT, N0, AndOp0);
}
// add (sext i1), X -> sub X, (zext i1)
if (N0.getOpcode() == ISD::SIGN_EXTEND &&
N0.getOperand(0).getValueType() == MVT::i1 &&
!TLI.isOperationLegal(ISD::SIGN_EXTEND, MVT::i1)) {
SDValue ZExt = DAG.getNode(ISD::ZERO_EXTEND, DL, VT, N0.getOperand(0));
return DAG.getNode(ISD::SUB, DL, VT, N1, ZExt);
}
// add X, (sextinreg Y i1) -> sub X, (and Y 1)
if (N1.getOpcode() == ISD::SIGN_EXTEND_INREG) {
VTSDNode *TN = cast<VTSDNode>(N1.getOperand(1));
if (TN->getVT() == MVT::i1) {
SDValue ZExt = DAG.getNode(ISD::AND, DL, VT, N1.getOperand(0),
DAG.getConstant(1, DL, VT));
return DAG.getNode(ISD::SUB, DL, VT, N0, ZExt);
}
}
// (add X, (addcarry Y, 0, Carry)) -> (addcarry X, Y, Carry)
if (N1.getOpcode() == ISD::ADDCARRY && isNullConstant(N1.getOperand(1)) &&
N1.getResNo() == 0)
return DAG.getNode(ISD::ADDCARRY, DL, N1->getVTList(),
N0, N1.getOperand(0), N1.getOperand(2));
// (add X, Carry) -> (addcarry X, 0, Carry)
if (TLI.isOperationLegalOrCustom(ISD::ADDCARRY, VT))
if (SDValue Carry = getAsCarry(TLI, N1))
return DAG.getNode(ISD::ADDCARRY, DL,
DAG.getVTList(VT, Carry.getValueType()), N0,
DAG.getConstant(0, DL, VT), Carry);
return SDValue();
}
SDValue DAGCombiner::visitADDC(SDNode *N) {
SDValue N0 = N->getOperand(0);
SDValue N1 = N->getOperand(1);
EVT VT = N0.getValueType();
SDLoc DL(N);
// If the flag result is dead, turn this into an ADD.
if (!N->hasAnyUseOfValue(1))
return CombineTo(N, DAG.getNode(ISD::ADD, DL, VT, N0, N1),
DAG.getNode(ISD::CARRY_FALSE, DL, MVT::Glue));
// canonicalize constant to RHS.
ConstantSDNode *N0C = dyn_cast<ConstantSDNode>(N0);
ConstantSDNode *N1C = dyn_cast<ConstantSDNode>(N1);
if (N0C && !N1C)
return DAG.getNode(ISD::ADDC, DL, N->getVTList(), N1, N0);
// fold (addc x, 0) -> x + no carry out
if (isNullConstant(N1))
return CombineTo(N, N0, DAG.getNode(ISD::CARRY_FALSE,
DL, MVT::Glue));
// If it cannot overflow, transform into an add.
if (DAG.computeOverflowKind(N0, N1) == SelectionDAG::OFK_Never)
return CombineTo(N, DAG.getNode(ISD::ADD, DL, VT, N0, N1),
DAG.getNode(ISD::CARRY_FALSE, DL, MVT::Glue));
return SDValue();
}
static SDValue flipBoolean(SDValue V, const SDLoc &DL, EVT VT,
SelectionDAG &DAG, const TargetLowering &TLI) {
SDValue Cst;
switch (TLI.getBooleanContents(VT)) {
case TargetLowering::ZeroOrOneBooleanContent:
case TargetLowering::UndefinedBooleanContent:
Cst = DAG.getConstant(1, DL, VT);
break;
case TargetLowering::ZeroOrNegativeOneBooleanContent:
Cst = DAG.getConstant(-1, DL, VT);
break;
}
return DAG.getNode(ISD::XOR, DL, VT, V, Cst);
}
static bool isBooleanFlip(SDValue V, EVT VT, const TargetLowering &TLI) {
if (V.getOpcode() != ISD::XOR) return false;
ConstantSDNode *Const = dyn_cast<ConstantSDNode>(V.getOperand(1));
if (!Const) return false;
switch(TLI.getBooleanContents(VT)) {
case TargetLowering::ZeroOrOneBooleanContent:
return Const->isOne();
case TargetLowering::ZeroOrNegativeOneBooleanContent:
return Const->isAllOnesValue();
case TargetLowering::UndefinedBooleanContent:
return (Const->getAPIntValue() & 0x01) == 1;
}
llvm_unreachable("Unsupported boolean content");
}
SDValue DAGCombiner::visitUADDO(SDNode *N) {
SDValue N0 = N->getOperand(0);
SDValue N1 = N->getOperand(1);
EVT VT = N0.getValueType();
if (VT.isVector())
return SDValue();
EVT CarryVT = N->getValueType(1);
SDLoc DL(N);
// If the flag result is dead, turn this into an ADD.
if (!N->hasAnyUseOfValue(1))
r