# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=bdver2 -timeline -timeline-max-iterations=2 < %s | FileCheck %s

  vmulps     %ymm0, %ymm1, %ymm2
  vpermil2pd $16, %xmm3, %xmm5, %xmm1, %xmm2
  vmulps     %ymm2, %ymm3, %ymm4
  vaddps     %ymm4, %ymm5, %ymm6
  vmulps     %ymm6, %ymm3, %ymm4
  vaddps     %ymm4, %ymm5, %ymm0

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      600
# CHECK-NEXT: Total Cycles:      653
# CHECK-NEXT: Total uOps:        1100

# CHECK:      Dispatch Width:    4
# CHECK-NEXT: uOps Per Cycle:    1.68
# CHECK-NEXT: IPC:               0.92
# CHECK-NEXT: Block RThroughput: 6.0

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  2      5     2.00                        vmulps	%ymm0, %ymm1, %ymm2
# CHECK-NEXT:  1      3     2.00                        vpermil2pd	$16, %xmm3, %xmm5, %xmm1, %xmm2
# CHECK-NEXT:  2      5     2.00                        vmulps	%ymm2, %ymm3, %ymm4
# CHECK-NEXT:  2      5     2.00                        vaddps	%ymm4, %ymm5, %ymm6
# CHECK-NEXT:  2      5     2.00                        vmulps	%ymm6, %ymm3, %ymm4
# CHECK-NEXT:  2      5     2.00                        vaddps	%ymm4, %ymm5, %ymm0

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - PdAGLU01
# CHECK-NEXT: [0.1] - PdAGLU01
# CHECK-NEXT: [1]   - PdBranch
# CHECK-NEXT: [2]   - PdCount
# CHECK-NEXT: [3]   - PdDiv
# CHECK-NEXT: [4]   - PdEX0
# CHECK-NEXT: [5]   - PdEX1
# CHECK-NEXT: [6]   - PdFPCVT
# CHECK-NEXT: [7.0] - PdFPFMA
# CHECK-NEXT: [7.1] - PdFPFMA
# CHECK-NEXT: [8.0] - PdFPMAL
# CHECK-NEXT: [8.1] - PdFPMAL
# CHECK-NEXT: [9]   - PdFPMMA
# CHECK-NEXT: [10]  - PdFPSTO
# CHECK-NEXT: [11]  - PdFPU0
# CHECK-NEXT: [12]  - PdFPU1
# CHECK-NEXT: [13]  - PdFPU2
# CHECK-NEXT: [14]  - PdFPU3
# CHECK-NEXT: [15]  - PdFPXBR
# CHECK-NEXT: [16.0] - PdLoad
# CHECK-NEXT: [16.1] - PdLoad
# CHECK-NEXT: [17]  - PdMul
# CHECK-NEXT: [18]  - PdStore

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1]    [2]    [3]    [4]    [5]    [6]    [7.0]  [7.1]  [8.0]  [8.1]  [9]    [10]   [11]   [12]   [13]   [14]   [15]   [16.0] [16.1] [17]   [18]
# CHECK-NEXT:  -      -      -      -      -      -      -      -     4.42   4.58    -      -      -      -     4.99   6.01    -      -      -      -      -      -      -

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1]    [2]    [3]    [4]    [5]    [6]    [7.0]  [7.1]  [8.0]  [8.1]  [9]    [10]   [11]   [12]   [13]   [14]   [15]   [16.0] [16.1] [17]   [18]   Instructions:
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.77   0.23    -      -      -      -      -     2.00    -      -      -      -      -      -      -     vmulps	%ymm0, %ymm1, %ymm2
# CHECK-NEXT:  -      -      -      -      -      -      -      -     1.64   2.36    -      -      -      -     0.99   0.01    -      -      -      -      -      -      -     vpermil2pd	$16, %xmm3, %xmm5, %xmm1, %xmm2
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.99   0.01    -      -      -      -      -     2.00    -      -      -      -      -      -      -     vmulps	%ymm2, %ymm3, %ymm4
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.01   0.99    -      -      -      -     2.00    -      -      -      -      -      -      -      -     vaddps	%ymm4, %ymm5, %ymm6
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.80   0.20    -      -      -      -      -     2.00    -      -      -      -      -      -      -     vmulps	%ymm6, %ymm3, %ymm4
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.21   0.79    -      -      -      -     2.00    -      -      -      -      -      -      -      -     vaddps	%ymm4, %ymm5, %ymm0

# CHECK:      Timeline view:
# CHECK-NEXT:                     0123456789          012
# CHECK-NEXT: Index     0123456789          0123456789

# CHECK:      [0,0]     DeeeeeER  .    .    .    .    . .   vmulps	%ymm0, %ymm1, %ymm2
# CHECK-NEXT: [0,1]     DeeeE--R  .    .    .    .    . .   vpermil2pd	$16, %xmm3, %xmm5, %xmm1, %xmm2
# CHECK-NEXT: [0,2]     .D==eeeeeER    .    .    .    . .   vmulps	%ymm2, %ymm3, %ymm4
# CHECK-NEXT: [0,3]     .D=======eeeeeER    .    .    . .   vaddps	%ymm4, %ymm5, %ymm6
# CHECK-NEXT: [0,4]     . D============eeeeeER   .    . .   vmulps	%ymm6, %ymm3, %ymm4
# CHECK-NEXT: [0,5]     . D=================eeeeeER   . .   vaddps	%ymm4, %ymm5, %ymm0
# CHECK-NEXT: [1,0]     .  D=====================eeeeeER.   vmulps	%ymm0, %ymm1, %ymm2
# CHECK-NEXT: [1,1]     .  D=eeeE----------------------R.   vpermil2pd	$16, %xmm3, %xmm5, %xmm1, %xmm2
# CHECK-NEXT: [1,2]     .   D=====eeeeeE---------------R.   vmulps	%ymm2, %ymm3, %ymm4
# CHECK-NEXT: [1,3]     .   D===========eeeeeE---------R.   vaddps	%ymm4, %ymm5, %ymm6
# CHECK-NEXT: [1,4]     .    D===============eeeeeE-----R   vmulps	%ymm6, %ymm3, %ymm4
# CHECK-NEXT: [1,5]     .    D====================eeeeeER   vaddps	%ymm4, %ymm5, %ymm0

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     2     11.5   0.5    0.0       vmulps	%ymm0, %ymm1, %ymm2
# CHECK-NEXT: 1.     2     1.5    1.5    12.0      vpermil2pd	$16, %xmm3, %xmm5, %xmm1, %xmm2
# CHECK-NEXT: 2.     2     4.5    1.0    7.5       vmulps	%ymm2, %ymm3, %ymm4
# CHECK-NEXT: 3.     2     10.0   0.5    4.5       vaddps	%ymm4, %ymm5, %ymm6
# CHECK-NEXT: 4.     2     14.5   0.5    2.5       vmulps	%ymm6, %ymm3, %ymm4
# CHECK-NEXT: 5.     2     19.5   0.0    0.0       vaddps	%ymm4, %ymm5, %ymm0