; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
; RUN: opt -passes=indvars -S < %s | FileCheck %s

declare i1 @cond()

; Range check here can be turned into invariant check.
define i32 @test_simple_case(i32 %start, i32 %len) {
; CHECK-LABEL: @test_simple_case(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FIRST_ITER:%.*]] = icmp ult i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[ZERO_CHECK:%.*]] = icmp ne i32 [[IV]], 0
; CHECK-NEXT:    br i1 [[ZERO_CHECK]], label [[RANGE_CHECK_BLOCK:%.*]], label [[FAILED_1:%.*]]
; CHECK:       range_check_block:
; CHECK-NEXT:    br i1 [[RANGE_CHECK_FIRST_ITER]], label [[BACKEDGE]], label [[FAILED_2:%.*]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA2:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA2]]
; CHECK:       failed_1:
; CHECK-NEXT:    ret i32 -1
; CHECK:       failed_2:
; CHECK-NEXT:    ret i32 -2
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %zero_check = icmp ne i32 %iv, 0
  br i1 %zero_check, label %range_check_block, label %failed_1

range_check_block:
  %iv.minus.1 = add i32 %iv, -1
  %range_check = icmp ult i32 %iv.minus.1, %len
  br i1 %range_check, label %backedge, label %failed_2

backedge:
  %iv.next = add i32 %iv, -1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed_1:
  ret i32 -1

failed_2:
  ret i32 -2
}

; This example is equivalent to @test_simple_case, with only difference that
; both checks are littered with extra irrelevant conditions. We should be able
; to replace it with invariant despite this fact.
; https://alive2.llvm.org/ce/z/G4iW8c
define i32 @test_litter_conditions(i32 %start, i32 %len) {
; CHECK-LABEL: @test_litter_conditions(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FIRST_ITER:%.*]] = icmp ult i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[ZERO_CHECK:%.*]] = icmp ne i32 [[IV]], 0
; CHECK-NEXT:    [[FAKE_1:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[AND_1:%.*]] = and i1 [[ZERO_CHECK]], [[FAKE_1]]
; CHECK-NEXT:    br i1 [[AND_1]], label [[RANGE_CHECK_BLOCK:%.*]], label [[FAILED_1:%.*]]
; CHECK:       range_check_block:
; CHECK-NEXT:    [[FAKE_2:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[AND_2:%.*]] = and i1 [[RANGE_CHECK_FIRST_ITER]], [[FAKE_2]]
; CHECK-NEXT:    br i1 [[AND_2]], label [[BACKEDGE]], label [[FAILED_2:%.*]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA2:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA2]]
; CHECK:       failed_1:
; CHECK-NEXT:    ret i32 -1
; CHECK:       failed_2:
; CHECK-NEXT:    ret i32 -2
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %zero_check = icmp ne i32 %iv, 0
  %fake_1 = call i1 @cond()
  %and_1 = and i1 %zero_check, %fake_1
  br i1 %and_1, label %range_check_block, label %failed_1

range_check_block:
  %iv.minus.1 = add i32 %iv, -1
  %range_check = icmp ult i32 %iv.minus.1, %len
  %fake_2 = call i1 @cond()
  %and_2 = and i1 %range_check, %fake_2
  br i1 %and_2, label %backedge, label %failed_2

backedge:
  %iv.next = add i32 %iv, -1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed_1:
  ret i32 -1

failed_2:
  ret i32 -2
}

; Same as test_litter_conditions, but swapped exit block branches
; and exit condition expressed by OR. Still optimizable.
define i32 @test_litter_conditions_inverse(i32 %start, i32 %len) {
; CHECK-LABEL: @test_litter_conditions_inverse(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FAILED_FIRST_ITER:%.*]] = icmp uge i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[ZERO_CHECK:%.*]] = icmp ne i32 [[IV]], 0
; CHECK-NEXT:    [[FAKE_1:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[AND_1:%.*]] = and i1 [[ZERO_CHECK]], [[FAKE_1]]
; CHECK-NEXT:    br i1 [[AND_1]], label [[RANGE_CHECK_BLOCK:%.*]], label [[FAILED_1:%.*]]
; CHECK:       range_check_block:
; CHECK-NEXT:    [[FAKE_2:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[OR_2:%.*]] = or i1 [[RANGE_CHECK_FAILED_FIRST_ITER]], [[FAKE_2]]
; CHECK-NEXT:    br i1 [[OR_2]], label [[FAILED_2:%.*]], label [[BACKEDGE]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA2:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA2]]
; CHECK:       failed_1:
; CHECK-NEXT:    ret i32 -1
; CHECK:       failed_2:
; CHECK-NEXT:    ret i32 -2
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %zero_check = icmp ne i32 %iv, 0
  %fake_1 = call i1 @cond()
  %and_1 = and i1 %zero_check, %fake_1
  br i1 %and_1, label %range_check_block, label %failed_1

range_check_block:
  %iv.minus.1 = add i32 %iv, -1
  %range_check_failed = icmp uge i32 %iv.minus.1, %len
  %fake_2 = call i1 @cond()
  %or_2 = or i1 %range_check_failed, %fake_2
  br i1 %or_2, label %failed_2, label %backedge

backedge:
  %iv.next = add i32 %iv, -1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed_1:
  ret i32 -1

failed_2:
  ret i32 -2
}

define i32 @test_litter_conditions_01(i32 %start, i32 %len) {
; CHECK-LABEL: @test_litter_conditions_01(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FIRST_ITER:%.*]] = icmp ult i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[ZERO_CHECK:%.*]] = icmp ne i32 [[IV]], 0
; CHECK-NEXT:    [[FAKE_1:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[AND_1:%.*]] = and i1 [[ZERO_CHECK]], [[FAKE_1]]
; CHECK-NEXT:    br i1 [[AND_1]], label [[RANGE_CHECK_BLOCK:%.*]], label [[FAILED_1:%.*]]
; CHECK:       range_check_block:
; CHECK-NEXT:    br i1 [[RANGE_CHECK_FIRST_ITER]], label [[BACKEDGE]], label [[FAILED_2:%.*]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA2:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA2]]
; CHECK:       failed_1:
; CHECK-NEXT:    ret i32 -1
; CHECK:       failed_2:
; CHECK-NEXT:    ret i32 -2
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %zero_check = icmp ne i32 %iv, 0
  %fake_1 = call i1 @cond()
  %and_1 = and i1 %zero_check, %fake_1
  br i1 %and_1, label %range_check_block, label %failed_1

range_check_block:
  %iv.minus.1 = add i32 %iv, -1
  %range_check = icmp ult i32 %iv.minus.1, %len
  br i1 %range_check, label %backedge, label %failed_2

backedge:
  %iv.next = add i32 %iv, -1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed_1:
  ret i32 -1

failed_2:
  ret i32 -2
}

; Same as test_litter_conditions_01, but swapped exit block branches
; and condition expressed by OR. Still optimizable.
define i32 @test_litter_conditions_01_inverse(i32 %start, i32 %len) {
; CHECK-LABEL: @test_litter_conditions_01_inverse(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FAILED_FIRST_ITER:%.*]] = icmp uge i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[ZERO_CHECK:%.*]] = icmp ne i32 [[IV]], 0
; CHECK-NEXT:    [[FAKE_1:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[AND_1:%.*]] = and i1 [[ZERO_CHECK]], [[FAKE_1]]
; CHECK-NEXT:    br i1 [[AND_1]], label [[RANGE_CHECK_BLOCK:%.*]], label [[FAILED_1:%.*]]
; CHECK:       range_check_block:
; CHECK-NEXT:    br i1 [[RANGE_CHECK_FAILED_FIRST_ITER]], label [[FAILED_2:%.*]], label [[BACKEDGE]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA2:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA2]]
; CHECK:       failed_1:
; CHECK-NEXT:    ret i32 -1
; CHECK:       failed_2:
; CHECK-NEXT:    ret i32 -2
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %zero_check = icmp ne i32 %iv, 0
  %fake_1 = call i1 @cond()
  %and_1 = and i1 %zero_check, %fake_1
  br i1 %and_1, label %range_check_block, label %failed_1

range_check_block:
  %iv.minus.1 = add i32 %iv, -1
  %range_check_failed = icmp uge i32 %iv.minus.1, %len
  br i1 %range_check_failed, label %failed_2, label %backedge

backedge:
  %iv.next = add i32 %iv, -1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed_1:
  ret i32 -1

failed_2:
  ret i32 -2
}

; TODO: Simplified version 2 of test_litter_conditions.
define i32 @test_litter_conditions_02(i32 %start, i32 %len) {
; CHECK-LABEL: @test_litter_conditions_02(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FIRST_ITER:%.*]] = icmp ult i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[ZERO_CHECK:%.*]] = icmp ne i32 [[IV]], 0
; CHECK-NEXT:    br i1 [[ZERO_CHECK]], label [[RANGE_CHECK_BLOCK:%.*]], label [[FAILED_1:%.*]]
; CHECK:       range_check_block:
; CHECK-NEXT:    [[FAKE_2:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[AND_2:%.*]] = and i1 [[RANGE_CHECK_FIRST_ITER]], [[FAKE_2]]
; CHECK-NEXT:    br i1 [[AND_2]], label [[BACKEDGE]], label [[FAILED_2:%.*]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA2:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA2]]
; CHECK:       failed_1:
; CHECK-NEXT:    ret i32 -1
; CHECK:       failed_2:
; CHECK-NEXT:    ret i32 -2
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %zero_check = icmp ne i32 %iv, 0
  br i1 %zero_check, label %range_check_block, label %failed_1

range_check_block:
  %iv.minus.1 = add i32 %iv, -1
  %range_check = icmp ult i32 %iv.minus.1, %len
  %fake_2 = call i1 @cond()
  %and_2 = and i1 %range_check, %fake_2
  br i1 %and_2, label %backedge, label %failed_2

backedge:
  %iv.next = add i32 %iv, -1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed_1:
  ret i32 -1

failed_2:
  ret i32 -2
}

; Same as test_litter_conditions_02, but swapped exit block branches,
; and condition is expressed as OR. Still optimizable.
define i32 @test_litter_conditions_02_inverse(i32 %start, i32 %len) {
; CHECK-LABEL: @test_litter_conditions_02_inverse(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FAILED_FIRST_ITER:%.*]] = icmp uge i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[ZERO_CHECK:%.*]] = icmp ne i32 [[IV]], 0
; CHECK-NEXT:    br i1 [[ZERO_CHECK]], label [[RANGE_CHECK_BLOCK:%.*]], label [[FAILED_1:%.*]]
; CHECK:       range_check_block:
; CHECK-NEXT:    [[FAKE_2:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[OR_2:%.*]] = or i1 [[RANGE_CHECK_FAILED_FIRST_ITER]], [[FAKE_2]]
; CHECK-NEXT:    br i1 [[OR_2]], label [[FAILED_2:%.*]], label [[BACKEDGE]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA2:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA2]]
; CHECK:       failed_1:
; CHECK-NEXT:    ret i32 -1
; CHECK:       failed_2:
; CHECK-NEXT:    ret i32 -2
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %zero_check = icmp ne i32 %iv, 0
  br i1 %zero_check, label %range_check_block, label %failed_1

range_check_block:
  %iv.minus.1 = add i32 %iv, -1
  %range_check_failed = icmp uge i32 %iv.minus.1, %len
  %fake_2 = call i1 @cond()
  %or_2 = or i1 %range_check_failed, %fake_2
  br i1 %or_2, label %failed_2, label %backedge

backedge:
  %iv.next = add i32 %iv, -1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed_1:
  ret i32 -1

failed_2:
  ret i32 -2
}

; Same as @test_litter_conditions, but all conditions are computed in
; header block. Make sure we infer fact from the right context.
; https://alive2.llvm.org/ce/z/JiD-Pw
define i32 @test_litter_conditions_bad_context(i32 %start, i32 %len) {
; CHECK-LABEL: @test_litter_conditions_bad_context(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FIRST_ITER:%.*]] = icmp ult i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[ZERO_CHECK:%.*]] = icmp ne i32 [[IV]], 0
; CHECK-NEXT:    [[FAKE_1:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[AND_1:%.*]] = and i1 [[ZERO_CHECK]], [[FAKE_1]]
; CHECK-NEXT:    [[FAKE_2:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[AND_2:%.*]] = and i1 [[RANGE_CHECK_FIRST_ITER]], [[FAKE_2]]
; CHECK-NEXT:    br i1 [[AND_1]], label [[RANGE_CHECK_BLOCK:%.*]], label [[FAILED_1:%.*]]
; CHECK:       range_check_block:
; CHECK-NEXT:    br i1 [[AND_2]], label [[BACKEDGE]], label [[FAILED_2:%.*]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA2:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA2]]
; CHECK:       failed_1:
; CHECK-NEXT:    ret i32 -1
; CHECK:       failed_2:
; CHECK-NEXT:    ret i32 -2
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %zero_check = icmp ne i32 %iv, 0
  %fake_1 = call i1 @cond()
  %and_1 = and i1 %zero_check, %fake_1
  %iv.minus.1 = add i32 %iv, -1
  %range_check = icmp ult i32 %iv.minus.1, %len
  %fake_2 = call i1 @cond()
  %and_2 = and i1 %range_check, %fake_2
  br i1 %and_1, label %range_check_block, label %failed_1

range_check_block:
  br i1 %and_2, label %backedge, label %failed_2

backedge:
  %iv.next = add i32 %iv, -1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed_1:
  ret i32 -1

failed_2:
  ret i32 -2
}

; Same as @test_litter_conditions_bad_context, but swapped exit block branches,
; and conditions expressed as OR. Still optimizable.
define i32 @test_litter_conditions_bad_context_inverse(i32 %start, i32 %len) {
; CHECK-LABEL: @test_litter_conditions_bad_context_inverse(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FAILED_FIRST_ITER:%.*]] = icmp uge i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[ZERO_CHECK:%.*]] = icmp ne i32 [[IV]], 0
; CHECK-NEXT:    [[FAKE_1:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[AND_1:%.*]] = and i1 [[ZERO_CHECK]], [[FAKE_1]]
; CHECK-NEXT:    [[FAKE_2:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[OR_2:%.*]] = or i1 [[RANGE_CHECK_FAILED_FIRST_ITER]], [[FAKE_2]]
; CHECK-NEXT:    br i1 [[AND_1]], label [[RANGE_CHECK_BLOCK:%.*]], label [[FAILED_1:%.*]]
; CHECK:       range_check_block:
; CHECK-NEXT:    br i1 [[OR_2]], label [[FAILED_2:%.*]], label [[BACKEDGE]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA2:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA2]]
; CHECK:       failed_1:
; CHECK-NEXT:    ret i32 -1
; CHECK:       failed_2:
; CHECK-NEXT:    ret i32 -2
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %zero_check = icmp ne i32 %iv, 0
  %fake_1 = call i1 @cond()
  %and_1 = and i1 %zero_check, %fake_1
  %iv.minus.1 = add i32 %iv, -1
  %range_check_failed = icmp uge i32 %iv.minus.1, %len
  %fake_2 = call i1 @cond()
  %or_2 = or i1 %range_check_failed, %fake_2
  br i1 %and_1, label %range_check_block, label %failed_1

range_check_block:
  br i1 %or_2, label %failed_2, label %backedge

backedge:
  %iv.next = add i32 %iv, -1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed_1:
  ret i32 -1

failed_2:
  ret i32 -2
}

; This test is equivalent to @test_simple_case, with only difference
; that both checks are merged together into one 'and' check. This
; should not prevent turning the range check into invariant.
; https://alive2.llvm.org/ce/z/G-2ERB
define i32 @test_and_conditions(i32 %start, i32 %len) {
; CHECK-LABEL: @test_and_conditions(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FIRST_ITER:%.*]] = icmp ult i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[ZERO_CHECK:%.*]] = icmp ne i32 [[IV]], 0
; CHECK-NEXT:    [[BOTH_CHECKS:%.*]] = and i1 [[ZERO_CHECK]], [[RANGE_CHECK_FIRST_ITER]]
; CHECK-NEXT:    br i1 [[BOTH_CHECKS]], label [[BACKEDGE]], label [[FAILED:%.*]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA1:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA1]]
; CHECK:       failed:
; CHECK-NEXT:    ret i32 -3
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %zero_check = icmp ne i32 %iv, 0
  %iv.minus.1 = add i32 %iv, -1
  %range_check = icmp ult i32 %iv.minus.1, %len
  %both_checks = and i1 %zero_check, %range_check
  br i1 %both_checks, label %backedge, label %failed

backedge:
  %iv.next = add i32 %iv, -1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed:
  ret i32 -3
}

; Same as test_and_conditions, but swapped exit block branches,
; and condition is expressed as OR. Still optimizable.
define i32 @test_and_conditions_inverse(i32 %start, i32 %len) {
; CHECK-LABEL: @test_and_conditions_inverse(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FAILED_FIRST_ITER:%.*]] = icmp uge i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[ZERO_CHECK_FAILED:%.*]] = icmp eq i32 [[IV]], 0
; CHECK-NEXT:    [[EITHER_CHECK:%.*]] = or i1 [[ZERO_CHECK_FAILED]], [[RANGE_CHECK_FAILED_FIRST_ITER]]
; CHECK-NEXT:    br i1 [[EITHER_CHECK]], label [[FAILED:%.*]], label [[BACKEDGE]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA1:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA1]]
; CHECK:       failed:
; CHECK-NEXT:    ret i32 -3
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %zero_check_failed = icmp eq i32 %iv, 0
  %iv.minus.1 = add i32 %iv, -1
  %range_check_failed = icmp uge i32 %iv.minus.1, %len
  %either_check = or i1 %zero_check_failed, %range_check_failed
  br i1 %either_check, label %failed, label %backedge

backedge:
  %iv.next = add i32 %iv, -1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed:
  ret i32 -3
}

; Same as test_litter_conditions, but with logical AND.
define i32 @test_litter_conditions_logical_and(i32 %start, i32 %len) {
; CHECK-LABEL: @test_litter_conditions_logical_and(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FIRST_ITER:%.*]] = icmp ult i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[ZERO_CHECK:%.*]] = icmp ne i32 [[IV]], 0
; CHECK-NEXT:    [[FAKE_1:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[AND_1:%.*]] = and i1 [[ZERO_CHECK]], [[FAKE_1]]
; CHECK-NEXT:    br i1 [[AND_1]], label [[RANGE_CHECK_BLOCK:%.*]], label [[FAILED_1:%.*]]
; CHECK:       range_check_block:
; CHECK-NEXT:    [[FAKE_2:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[AND_2:%.*]] = select i1 [[RANGE_CHECK_FIRST_ITER]], i1 [[FAKE_2]], i1 false
; CHECK-NEXT:    br i1 [[AND_2]], label [[BACKEDGE]], label [[FAILED_2:%.*]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA2:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA2]]
; CHECK:       failed_1:
; CHECK-NEXT:    ret i32 -1
; CHECK:       failed_2:
; CHECK-NEXT:    ret i32 -2
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %zero_check = icmp ne i32 %iv, 0
  %fake_1 = call i1 @cond()
  %and_1 = and i1 %zero_check, %fake_1
  br i1 %and_1, label %range_check_block, label %failed_1

range_check_block:
  %iv.minus.1 = add i32 %iv, -1
  %range_check = icmp ult i32 %iv.minus.1, %len
  %fake_2 = call i1 @cond()
  %and_2 = select i1 %range_check, i1 %fake_2, i1 false
  br i1 %and_2, label %backedge, label %failed_2

backedge:
  %iv.next = add i32 %iv, -1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed_1:
  ret i32 -1

failed_2:
  ret i32 -2
}

; Same as test_litter_conditions_inverse, but with logical OR.
define i32 @test_litter_conditions_inverse_logical_or(i32 %start, i32 %len) {
; CHECK-LABEL: @test_litter_conditions_inverse_logical_or(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FAILED_FIRST_ITER:%.*]] = icmp uge i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[ZERO_CHECK:%.*]] = icmp ne i32 [[IV]], 0
; CHECK-NEXT:    [[FAKE_1:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[AND_1:%.*]] = and i1 [[ZERO_CHECK]], [[FAKE_1]]
; CHECK-NEXT:    br i1 [[AND_1]], label [[RANGE_CHECK_BLOCK:%.*]], label [[FAILED_1:%.*]]
; CHECK:       range_check_block:
; CHECK-NEXT:    [[FAKE_2:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[OR_2:%.*]] = select i1 [[RANGE_CHECK_FAILED_FIRST_ITER]], i1 true, i1 [[FAKE_2]]
; CHECK-NEXT:    br i1 [[OR_2]], label [[FAILED_2:%.*]], label [[BACKEDGE]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA2:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA2]]
; CHECK:       failed_1:
; CHECK-NEXT:    ret i32 -1
; CHECK:       failed_2:
; CHECK-NEXT:    ret i32 -2
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %zero_check = icmp ne i32 %iv, 0
  %fake_1 = call i1 @cond()
  %and_1 = and i1 %zero_check, %fake_1
  br i1 %and_1, label %range_check_block, label %failed_1

range_check_block:
  %iv.minus.1 = add i32 %iv, -1
  %range_check_failed = icmp uge i32 %iv.minus.1, %len
  %fake_2 = call i1 @cond()
  %or_2 = select i1 %range_check_failed, i1 true, i1 %fake_2
  br i1 %or_2, label %failed_2, label %backedge

backedge:
  %iv.next = add i32 %iv, -1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed_1:
  ret i32 -1

failed_2:
  ret i32 -2
}

; Same as test_and_conditions, but with logical AND.
define i32 @test_and_conditions_logical_and(i32 %start, i32 %len) {
; CHECK-LABEL: @test_and_conditions_logical_and(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FIRST_ITER:%.*]] = icmp ult i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[ZERO_CHECK:%.*]] = icmp ne i32 [[IV]], 0
; CHECK-NEXT:    [[BOTH_CHECKS:%.*]] = select i1 [[ZERO_CHECK]], i1 [[RANGE_CHECK_FIRST_ITER]], i1 false
; CHECK-NEXT:    br i1 [[BOTH_CHECKS]], label [[BACKEDGE]], label [[FAILED:%.*]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA1:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA1]]
; CHECK:       failed:
; CHECK-NEXT:    ret i32 -3
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %zero_check = icmp ne i32 %iv, 0
  %iv.minus.1 = add i32 %iv, -1
  %range_check = icmp ult i32 %iv.minus.1, %len
  %both_checks = select i1 %zero_check, i1 %range_check, i1 false
  br i1 %both_checks, label %backedge, label %failed

backedge:
  %iv.next = add i32 %iv, -1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed:
  ret i32 -3
}

; Same as test_and_conditions_inverse, but with logical OR.
define i32 @test_and_conditions_inverse_logical_or(i32 %start, i32 %len) {
; CHECK-LABEL: @test_and_conditions_inverse_logical_or(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FAILED_FIRST_ITER:%.*]] = icmp uge i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[ZERO_CHECK_FAILED:%.*]] = icmp eq i32 [[IV]], 0
; CHECK-NEXT:    [[EITHER_CHECK:%.*]] = select i1 [[ZERO_CHECK_FAILED]], i1 true, i1 [[RANGE_CHECK_FAILED_FIRST_ITER]]
; CHECK-NEXT:    br i1 [[EITHER_CHECK]], label [[FAILED:%.*]], label [[BACKEDGE]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA1:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA1]]
; CHECK:       failed:
; CHECK-NEXT:    ret i32 -3
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %zero_check_failed = icmp eq i32 %iv, 0
  %iv.minus.1 = add i32 %iv, -1
  %range_check_failed = icmp uge i32 %iv.minus.1, %len
  %either_check = select i1 %zero_check_failed, i1 true, i1 %range_check_failed
  br i1 %either_check, label %failed, label %backedge

backedge:
  %iv.next = add i32 %iv, -1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed:
  ret i32 -3
}

; Same as test_litter_conditions, but an extra check with known exact exit count is preventing the opt.
define i32 @test_litter_conditions_constant(i32 %start, i32 %len) {
; CHECK-LABEL: @test_litter_conditions_constant(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], -1
; CHECK-NEXT:    [[RANGE_CHECK_FIRST_ITER:%.*]] = icmp ult i32 [[TMP0]], [[LEN:%.*]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[CANONICAL_IV:%.*]] = phi i32 [ 0, [[ENTRY]] ], [ [[CANONICAL_IV_NEXT:%.*]], [[BACKEDGE]] ]
; CHECK-NEXT:    [[CONSTANT_CHECK:%.*]] = icmp samesign ult i32 [[CANONICAL_IV]], 65635
; CHECK-NEXT:    br i1 [[CONSTANT_CHECK]], label [[CONSTANT_CHECK_PASSED:%.*]], label [[CONSTANT_CHECK_FAILED:%.*]]
; CHECK:       constant_check_passed:
; CHECK-NEXT:    [[ZERO_CHECK:%.*]] = icmp ne i32 [[IV]], 0
; CHECK-NEXT:    [[FAKE_1:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[AND_1:%.*]] = and i1 [[ZERO_CHECK]], [[FAKE_1]]
; CHECK-NEXT:    br i1 [[AND_1]], label [[RANGE_CHECK_BLOCK:%.*]], label [[FAILED_1:%.*]]
; CHECK:       range_check_block:
; CHECK-NEXT:    [[FAKE_2:%.*]] = call i1 @cond()
; CHECK-NEXT:    [[AND_2:%.*]] = and i1 [[RANGE_CHECK_FIRST_ITER]], [[FAKE_2]]
; CHECK-NEXT:    br i1 [[AND_2]], label [[BACKEDGE]], label [[FAILED_2:%.*]]
; CHECK:       backedge:
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], -1
; CHECK-NEXT:    [[CANONICAL_IV_NEXT]] = add nuw nsw i32 [[CANONICAL_IV]], 1
; CHECK-NEXT:    [[LOOP_COND:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[DONE:%.*]], label [[LOOP]]
; CHECK:       done:
; CHECK-NEXT:    [[IV_LCSSA3:%.*]] = phi i32 [ [[IV]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA3]]
; CHECK:       failed_1:
; CHECK-NEXT:    ret i32 -1
; CHECK:       failed_2:
; CHECK-NEXT:    ret i32 -2
; CHECK:       constant_check_failed:
; CHECK-NEXT:    ret i32 -3
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %canonical_iv = phi i32 [0, %entry], [%canonical_iv.next, %backedge]
  %constant_check = icmp ult i32 %canonical_iv, 65635
  br i1 %constant_check, label %constant_check_passed, label %constant_check_failed

constant_check_passed:
  %zero_check = icmp ne i32 %iv, 0
  %fake_1 = call i1 @cond()
  %and_1 = and i1 %zero_check, %fake_1
  br i1 %and_1, label %range_check_block, label %failed_1

range_check_block:
  %iv.minus.1 = add i32 %iv, -1
  %range_check = icmp ult i32 %iv.minus.1, %len
  %fake_2 = call i1 @cond()
  %and_2 = and i1 %range_check, %fake_2
  br i1 %and_2, label %backedge, label %failed_2

backedge:
  %iv.next = add i32 %iv, -1
  %canonical_iv.next = add i32 %canonical_iv, 1
  %loop_cond = call i1 @cond()
  br i1 %loop_cond, label %done, label %loop

done:
  ret i32 %iv

failed_1:
  ret i32 -1

failed_2:
  ret i32 -2

constant_check_failed:
  ret i32 -3
}

; TODO: the backedge is predicated by iv.next <u len. It means that starting the
; 2nd iteration, iv <u len is a known fact. We can replace %check with
; %check.first.iter = icmp ult i32 0, %len.
define i32 @test_predicated_backedge_no_side_exit(i32 %len) {
; CHECK-LABEL: @test_predicated_backedge_no_side_exit(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[UMAX:%.*]] = call i32 @llvm.umax.i32(i32 [[LEN:%.*]], i32 1)
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[UMAX]], -1
; CHECK-NEXT:    [[UMIN:%.*]] = call i32 @llvm.umin.i32(i32 [[LEN]], i32 [[TMP0]])
; CHECK-NEXT:    [[TMP1:%.*]] = icmp ne i32 [[LEN]], [[UMIN]]
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ 0, [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[IV_NEXT]] = add nuw i32 [[IV]], 1
; CHECK-NEXT:    br i1 [[TMP1]], label [[BACKEDGE]], label [[FAILED:%.*]]
; CHECK:       backedge:
; CHECK-NEXT:    [[LOOP_COND:%.*]] = icmp ult i32 [[IV_NEXT]], [[LEN]]
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[LOOP]], label [[EXIT:%.*]]
; CHECK:       exit:
; CHECK-NEXT:    [[IV_NEXT_LCSSA1:%.*]] = phi i32 [ [[IV_NEXT]], [[BACKEDGE]] ]
; CHECK-NEXT:    ret i32 [[IV_NEXT_LCSSA1]]
; CHECK:       failed:
; CHECK-NEXT:    ret i32 -1
;
entry:
  br label %loop

loop:
  %iv = phi i32 [0, %entry], [%iv.next, %backedge]
  %iv.next = add i32 %iv, 1
  %check = icmp ult i32 %iv, %len
  br i1 %check, label %backedge, label %failed

backedge:
  %loop.cond = icmp ult i32 %iv.next, %len
  br i1 %loop.cond, label %loop, label %exit

exit:
  ret i32 %iv.next

failed:
  ret i32 -1
}

; TODO: the backedge is predicated by iv.next <u len. It means that starting the
; 2nd iteration, iv <u len is a known fact. We can replace %check with
; %check.first.iter = icmp ult i32 0, %len.
define i32 @test_predicated_backedge_with_side_exit(i32 %len) {
; CHECK-LABEL: @test_predicated_backedge_with_side_exit(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[UMAX:%.*]] = call i32 @llvm.umax.i32(i32 [[LEN:%.*]], i32 1)
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ 0, [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[IV_NEXT]] = add nuw i32 [[IV]], 1
; CHECK-NEXT:    [[CHECK:%.*]] = icmp ult i32 [[IV]], [[LEN]]
; CHECK-NEXT:    br i1 [[CHECK]], label [[INNER_BLOCK:%.*]], label [[FAILED:%.*]]
; CHECK:       inner_block:
; CHECK-NEXT:    [[COND_1:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[COND_1]], label [[BACKEDGE]], label [[FAILED]]
; CHECK:       backedge:
; CHECK-NEXT:    [[LOOP_COND:%.*]] = icmp ult i32 [[IV_NEXT]], [[LEN]]
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[LOOP]], label [[EXIT:%.*]]
; CHECK:       exit:
; CHECK-NEXT:    ret i32 [[UMAX]]
; CHECK:       failed:
; CHECK-NEXT:    ret i32 -1
;
entry:
  br label %loop

loop:
  %iv = phi i32 [0, %entry], [%iv.next, %backedge]
  %iv.next = add i32 %iv, 1
  %check = icmp ult i32 %iv, %len
  br i1 %check, label %inner_block, label %failed

inner_block:
  %cond_1 = call i1 @cond()
  br i1 %cond_1, label %backedge, label %failed

backedge:
  %loop.cond = icmp ult i32 %iv.next, %len
  br i1 %loop.cond, label %loop, label %exit

exit:
  ret i32 %iv.next

failed:
  ret i32 -1
}

; TODO: the backedge is predicated by iv.next <u len. It means that starting the
; 2nd iteration, iv <u len is a known fact. We can replace %check with
; %check.first.iter = icmp ult i32 %start, %len.
define i32 @test_predicated_backedge_with_side_exit_unknown_start(i32 %start, i32 %len) {
; CHECK-LABEL: @test_predicated_backedge_with_side_exit_unknown_start(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = add i32 [[START:%.*]], 1
; CHECK-NEXT:    [[UMAX:%.*]] = call i32 @llvm.umax.i32(i32 [[LEN:%.*]], i32 [[TMP0]])
; CHECK-NEXT:    br label [[LOOP:%.*]]
; CHECK:       loop:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ [[START]], [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[BACKEDGE:%.*]] ]
; CHECK-NEXT:    [[IV_NEXT]] = add i32 [[IV]], 1
; CHECK-NEXT:    [[CHECK:%.*]] = icmp ult i32 [[IV]], [[LEN]]
; CHECK-NEXT:    br i1 [[CHECK]], label [[INNER_BLOCK:%.*]], label [[FAILED:%.*]]
; CHECK:       inner_block:
; CHECK-NEXT:    [[COND_1:%.*]] = call i1 @cond()
; CHECK-NEXT:    br i1 [[COND_1]], label [[BACKEDGE]], label [[FAILED]]
; CHECK:       backedge:
; CHECK-NEXT:    [[LOOP_COND:%.*]] = icmp ult i32 [[IV_NEXT]], [[LEN]]
; CHECK-NEXT:    br i1 [[LOOP_COND]], label [[LOOP]], label [[EXIT:%.*]]
; CHECK:       exit:
; CHECK-NEXT:    ret i32 [[UMAX]]
; CHECK:       failed:
; CHECK-NEXT:    ret i32 -1
;
entry:
  br label %loop

loop:
  %iv = phi i32 [%start, %entry], [%iv.next, %backedge]
  %iv.next = add i32 %iv, 1
  %check = icmp ult i32 %iv, %len
  br i1 %check, label %inner_block, label %failed

inner_block:
  %cond_1 = call i1 @cond()
  br i1 %cond_1, label %backedge, label %failed

backedge:
  %loop.cond = icmp ult i32 %iv.next, %len
  br i1 %loop.cond, label %loop, label %exit

exit:
  ret i32 %iv.next

failed:
  ret i32 -1
}

; PR180870: %range_check1 here cannot be made invariant.
define i32 @not_invariant_samesign(i32 %unknown_limit, ptr %length_ptr) {
; CHECK-LABEL: @not_invariant_samesign(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    br label [[HEADER:%.*]]
; CHECK:       header:
; CHECK-NEXT:    [[IV:%.*]] = phi i32 [ 1, [[ENTRY:%.*]] ], [ [[IV_NEXT:%.*]], [[LATCH:%.*]] ]
; CHECK-NEXT:    [[IV_NEXT]] = add nuw i32 [[IV]], 1
; CHECK-NEXT:    [[RANGE_CHECK1_FIRST_ITER:%.*]] = icmp samesign ult i32 [[IV_NEXT]], [[UNKNOWN_LIMIT:%.*]]
; CHECK-NEXT:    [[IS_POSITIVE:%.*]] = icmp sgt i32 [[UNKNOWN_LIMIT]], 0
; CHECK-NEXT:    [[OR_COND:%.*]] = and i1 [[RANGE_CHECK1_FIRST_ITER]], [[IS_POSITIVE]]
; CHECK-NEXT:    br i1 [[OR_COND]], label [[LATCH]], label [[RET:%.*]]
; CHECK:       latch:
; CHECK-NEXT:    [[IV_PREV:%.*]] = add nsw i32 [[IV]], -1
; CHECK-NEXT:    [[LENGTH:%.*]] = load i32, ptr [[LENGTH_PTR:%.*]], align 4, !range [[RNG0:![0-9]+]]
; CHECK-NEXT:    [[RANGE_CHECK2:%.*]] = icmp samesign ult i32 [[IV_PREV]], [[LENGTH]]
; CHECK-NEXT:    br i1 [[RANGE_CHECK2]], label [[HEADER]], label [[RET]]
; CHECK:       ret:
; CHECK-NEXT:    [[IV_LCSSA:%.*]] = phi i32 [ [[IV]], [[LATCH]] ], [ [[IV]], [[HEADER]] ]
; CHECK-NEXT:    ret i32 [[IV_LCSSA]]
;
entry:
  br label %header

header:                                           ; preds = %latch, %entry
  %iv = phi i32 [ 1, %entry ], [ %iv.next, %latch ]
  %iv.next = add i32 %iv, 1
  %range_check1 = icmp samesign ult i32 %iv.next, %unknown_limit
  %is_positive = icmp sgt i32 %unknown_limit, 0
  %or.cond = and i1 %range_check1, %is_positive
  br i1 %or.cond, label %latch, label %ret

latch:                                            ; preds = %header
  %iv.prev = add i32 %iv, -1
  %length = load i32, ptr %length_ptr, align 4, !range !0
  %range_check2 = icmp ult i32 %iv.prev, %length
  br i1 %range_check2, label %header, label %ret

ret:                                              ; preds = %latch, %header
  ret i32 %iv
}

!0 = !{i32 0, i32 2147483647}