| @ RUN: not llvm-mc -triple=thumbv7-apple-darwin < %s 2> %t |
| @ RUN: FileCheck --check-prefix=CHECK-ERRORS --check-prefix=CHECK-ERRORS-V7 < %t %s |
| |
| @ RUN: not llvm-mc -triple=thumbv8-apple-darwin < %s 2> %t |
| @ RUN: FileCheck --check-prefix=CHECK-ERRORS --check-prefix=CHECK-ERRORS-V8 < %t %s |
| |
| @ Ill-formed IT block instructions. |
| itet eq |
| addle r0, r1, r2 |
| nop |
| it le |
| iteeee gt |
| ittfe le |
| nopeq |
| |
| @ CHECK-ERRORS: error: incorrect condition in IT block; got 'le', but expected 'eq' |
| @ CHECK-ERRORS: addle r0, r1, r2 |
| @ CHECK-ERRORS: ^ |
| @ CHECK-ERRORS: error: incorrect condition in IT block; got 'al', but expected 'ne' |
| @ CHECK-ERRORS: nop |
| @ CHECK-ERRORS: ^ |
| @ CHECK-ERRORS: error: instructions in IT block must be predicable |
| @ CHECK-ERRORS: it le |
| @ CHECK-ERRORS: ^ |
| @ CHECK-ERRORS: error: too many conditions on IT instruction |
| @ CHECK-ERRORS: iteeee gt |
| @ CHECK-ERRORS: ^ |
| @ CHECK-ERRORS: error: illegal IT block condition mask 'tfe' |
| @ CHECK-ERRORS: ittfe le |
| @ CHECK-ERRORS: ^ |
| @ CHECK-ERRORS: error: predicated instructions must be in IT block |
| @ CHECK-ERRORS: nopeq |
| @ CHECK-ERRORS: ^ |
| |
| @ Out of range immediates for MRC/MRC2/MRRC/MRRC2 |
| mrc p14, #8, r1, c1, c2, #4 |
| mrc p14, #1, r1, c1, c2, #8 |
| mrc2 p14, #8, r1, c1, c2, #4 |
| mrc2 p14, #0, r1, c1, c2, #9 |
| mrrc p14, #16, r5, r4, c1 |
| mrrc2 p14, #17, r5, r4, c1 |
| @ CHECK-ERRORS: operand must be an immediate in the range [0,7] |
| @ CHECK-ERRORS: operand must be an immediate in the range [0,7] |
| @ CHECK-ERRORS-V7: operand must be an immediate in the range [0,7] |
| @ CHECK-ERRORS-V7: operand must be an immediate in the range [0,7] |
| @ CHECK-ERRORS-V8: invalid instruction |
| @ CHECK-ERRORS-V8: too many operands for instruction |
| @ CHECK-ERRORS: operand must be an immediate in the range [0,15] |
| @ CHECK-ERRORS-V7: operand must be an immediate in the range [0,15] |
| @ CHECK-ERRORS-V8: invalid instruction |
| |
| isb #-1 |
| isb #16 |
| @ CHECK-ERRORS: error: immediate value out of range |
| @ CHECK-ERRORS: error: immediate value out of range |
| |
| itt eq |
| bkpteq #1 |
| @ CHECK-ERRORS: error: instruction 'bkpt' is not predicable, but condition code specified |
| |
| nopeq |
| nopeq |
| |
| @ out of range operands for Thumb2 targets |
| |
| beq.w #-1048578 |
| bne.w #1048576 |
| blt.w #1013411 |
| b.w #-16777218 |
| b.w #16777216 |
| b.w #1592313 |
| |
| @ CHECK-ERRORS: error: branch target out of range |
| @ CHECK-ERRORS: error: branch target out of range |
| @ CHECK-ERRORS: error: branch target out of range |
| @ CHECK-ERRORS: error: branch target out of range |
| @ CHECK-ERRORS: error: branch target out of range |
| @ CHECK-ERRORS: error: branch target out of range |
| |
| foo2: |
| movw r0, foo2 |
| movt r0, foo2 |
| movt r0, #0x10000 |
| movt r0, #0x10000 |
| @ CHECK-ERRORS: error: immediate expression for mov requires :lower16: or :upper16 |
| @ CHECK-ERRORS: ^ |
| @ CHECK-ERRORS: immediate expression for mov requires :lower16: or :upper16 |
| @ CHECK-ERRORS: ^ |
| @ CHECK-ERRORS: error: operand must be an immediate in the range [0,0xffff] or a relocatable expression |
| @ CHECK-ERRORS: error: operand must be an immediate in the range [0,0xffff] or a relocatable expression |
| |
| and sp, r1, #80008000 |
| and pc, r1, #80008000 |
| @ CHECK-ERRORS: error: invalid instruction |
| @ CHECK-ERRORS: error: invalid instruction |
| |
| ssat r0, #1, r0, asr #32 |
| usat r0, #1, r0, asr #32 |
| @ CHECK-ERRORS: error: 'asr #32' shift amount not allowed in Thumb mode |
| @ CHECK-ERRORS: error: 'asr #32' shift amount not allowed in Thumb mode |
| |
| @ PC is not valid as shifted-rGPR |
| sbc.w r2, r7, pc, lsr #16 |
| and.w r2, r7, pc, lsr #16 |
| @ CHECK-ERRORS: error: invalid instruction, any one of the following would fix this: |
| @ CHECK-ERRORS: note: invalid operand for instruction |
| @ CHECK-ERRORS-V7: note: operand must be a register in range [r0, r12] or r14 |
| @ CHECK-ERRORS-V8: note: operand must be a register in range [r0, r14] |
| @ CHECK-ERRORS: error: invalid instruction, any one of the following would fix this: |
| @ CHECK-ERRORS: note: invalid operand for instruction |
| @ CHECK-ERRORS-V7: note: operand must be a register in range [r0, r12] or r14 |
| @ CHECK-ERRORS-V8: note: operand must be a register in range [r0, r14] |
| |
| |
| @ PC is not valid as base of load |
| ldr r0, [pc, r0] |
| ldrb r1, [pc, r2] |
| ldrh r3, [pc, r3] |
| pld r4, [pc, r5] |
| str r6, [pc, r7] |
| strb r7 [pc, r8] |
| strh r9, [pc, r10] |
| @ CHECK-ERRORS: error: invalid instruction, any one of the following would fix this: |
| @ CHECK-ERRORS: note: invalid operand for instruction |
| @ CHECK-ERRORS: note: instruction requires: arm-mode |
| @ CHECK-ERRORS: error: invalid instruction, any one of the following would fix this: |
| @ CHECK-ERRORS: note: invalid operand for instruction |
| @ CHECK-ERRORS: note: instruction requires: arm-mode |
| @ CHECK-ERRORS: error: invalid instruction, any one of the following would fix this: |
| @ CHECK-ERRORS: note: instruction requires: arm-mode |
| @ CHECK-ERRORS: note: invalid operand for instruction |
| @ CHECK-ERRORS: error: invalid instruction |
| @ CHECK-ERRORS: error: invalid instruction, any one of the following would fix this: |
| @ CHECK-ERRORS: note: invalid operand for instruction |
| @ CHECK-ERRORS: note: instruction requires: arm-mode |
| @ CHECK-ERRORS: error: immediate value expected for vector index |
| @ CHECK-ERRORS: error: invalid instruction, any one of the following would fix this: |
| @ CHECK-ERRORS: note: instruction requires: arm-mode |
| @ CHECK-ERRORS: note: invalid operand for instruction |
| |
| @ SWP(B) is an ARM-only instruction |
| swp r0, r1, [r2] |
| swpb r3, r4, [r5] |
| @ CHECK-ERRORS-V7: error: instruction requires: arm-mode |
| @ CHECK-ERRORS-V7: error: instruction requires: arm-mode |
| @ CHECK-ERRORS-V8: error: invalid instruction |
| @ CHECK-ERRORS-V8: error: invalid instruction |
| |
| @ Generic error for too few operands |
| adds |
| adds r0 |
| @ CHECK-ERRORS: error: too few operands for instruction |
| @ CHECK-ERRORS: error: too few operands for instruction |
| |
| tst sp, #3 |
| tst sp, r5 |
| tst sp, r5, lsl #3 |
| @ CHECK-ERRORS-V7: error: operand must be a register in range [r0, r12] or r14 |
| @ CHECK-ERRORS-V7: operand must be a register in range [r0, r12] or r14 |
| @ CHECK-ERRORS-V7: operand must be a register in range [r0, r12] or r14 |
| |
| teq sp, #5 |
| teq sp, r7 |
| teq sp, r9, lsl #2 |
| @ CHECK-ERRORS-V7: error: operand must be a register in range [r0, r12] or r14 |
| @ CHECK-ERRORS-V7: operand must be a register in range [r0, r12] or r14 |
| @ CHECK-ERRORS-V7: operand must be a register in range [r0, r12] or r14 |
| |
| tbb [r0, sp] |
| @ v8 allows rm = sp |
| @ CHECK-ERRORS-V7: error: instruction variant requires ARMv8 or later |
| tbb [r0, pc] |
| @ rm = pc is always unpredictable |
| @ CHECK-ERRORS: error: invalid operand for instruction |
| tbb [sp, r0] |
| @ v8 allows rn = sp |
| @ CHECK-ERRORS-V7: error: instruction variant requires ARMv8 or later |
| @ rn = pc is allowed so not included here |
| |
| tbh [r0, sp, lsl #1] |
| @ v8 allows rm = sp |
| @ CHECK-ERRORS-V7: error: instruction variant requires ARMv8 or later |
| tbh [r0, pc, lsl #1] |
| @ rm = pc is always unpredictable |
| @ CHECK-ERRORS: error: invalid operand for instruction |
| tbh [sp, r0, lsl #1] |
| @ v8 allows rn = sp |
| @ CHECK-ERRORS-V7: error: instruction variant requires ARMv8 or later |
| @ rn=pc is allowed so not included here |