| ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py |
| ; RUN: opt -passes='gvn' -S %s | FileCheck %s |
| |
| define i32 @load_of_ptr_select_can_be_replaced_by_value_select(ptr %ptr, ptr %end) { |
| ; CHECK-LABEL: @load_of_ptr_select_can_be_replaced_by_value_select( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @different_phis_1(ptr %ptr, ptr %end) { |
| ; CHECK-LABEL: @different_phis_1( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ null, [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ null, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @different_phi_2(ptr %ptr, ptr %end) { |
| ; CHECK-LABEL: @different_phi_2( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[START_PTR]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT:%.*]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %start.ptr, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @different_phis_3(ptr %ptr, ptr %end) { |
| ; CHECK-LABEL: @different_phis_3( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ 19, [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ 19, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @different_phis_4(ptr %ptr, ptr %end) { |
| ; CHECK-LABEL: @different_phis_4( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ 10, [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL:%.*]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ 10, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @load_before_loop_in_different_block(ptr %ptr, ptr %end, i1 %c) { |
| ; CHECK-LABEL: @load_before_loop_in_different_block( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br i1 [[C:%.*]], label [[PH:%.*]], label [[EXIT_2:%.*]] |
| ; CHECK: ph: |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[PH]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[PH]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[PH]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; CHECK: exit.2: |
| ; CHECK-NEXT: ret i32 0 |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br i1 %c, label %ph, label %exit.2 |
| |
| ph: |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %ph ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %ph ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %ph ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| |
| exit.2: |
| ret i32 0 |
| } |
| |
| define i32 @selects_use_different_compares(ptr %ptr, ptr %end) { |
| ; CHECK-LABEL: @selects_use_different_compares( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[CMP_2:%.*]] = icmp ult i32 [[L_1]], 10 |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_2]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %cmp.2 = icmp ult i32 %l.1, 10 |
| %min.val = select i1 %cmp.2, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| |
| define i32 @value_select_different_value_1(ptr %ptr, ptr %end) { |
| ; CHECK-LABEL: @value_select_different_value_1( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 10 |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 10 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @value_select_different_value_2(ptr %ptr, ptr %end, ptr %ptr.2) { |
| ; CHECK-LABEL: @value_select_different_value_2( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: [[L_1_PRE:%.*]] = load i32, ptr [[PTR_2:%.*]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1_PRE]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1_PRE]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.2, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @pointer_select_clobbered_1(ptr %ptr, ptr %end) { |
| ; CHECK-LABEL: @pointer_select_clobbered_1( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: store i32 99, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| store i32 99, ptr %ptr |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @pointer_select_clobbered_in_loop(ptr %ptr, ptr %end) { |
| ; CHECK-LABEL: @pointer_select_clobbered_in_loop( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: store i32 99, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| store i32 99, ptr %ptr |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @pointer_select_clobbered_in_loop_2(ptr %ptr, ptr %end) { |
| ; CHECK-LABEL: @pointer_select_clobbered_in_loop_2( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: store i32 99, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| store i32 99, ptr %ptr |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @pointer_select_clobbered_in_loop_3(ptr %ptr, ptr %end) { |
| ; CHECK-LABEL: @pointer_select_clobbered_in_loop_3( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: store i32 99, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| store i32 99, ptr %ptr.iv |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @pointer_select_clobbered_in_loop_4(ptr %ptr, ptr %end, ptr %ptr.2) { |
| ; CHECK-LABEL: @pointer_select_clobbered_in_loop_4( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: store i32 99, ptr [[PTR_2:%.*]], align 4 |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| store i32 99, ptr %ptr.2 |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| declare void @may_write() |
| |
| define i32 @pointer_select_clobbered_by_call_before_loop(ptr %ptr, ptr %end, ptr %ptr.2) { |
| ; CHECK-LABEL: @pointer_select_clobbered_by_call_before_loop( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: call void @may_write() |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| call void @may_write() |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @pointer_select_clobbered_by_call_in_loop(ptr %ptr, ptr %end, ptr %ptr.2) { |
| ; CHECK-LABEL: @pointer_select_clobbered_by_call_in_loop( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: call void @may_write() |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| call void @may_write() |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @pointer_select_clobbered_by_call_after_loop(ptr %ptr, ptr %end, ptr %ptr.2) { |
| ; CHECK-LABEL: @pointer_select_clobbered_by_call_after_loop( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: call void @may_write() |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| call void @may_write() |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @pointer_select_clobbered_after_loop(ptr %ptr, ptr %end) { |
| ; CHECK-LABEL: @pointer_select_clobbered_after_loop( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: store i32 99, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| store i32 99, ptr %ptr |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| declare void @may_throw() readonly |
| |
| define i32 @pointer_select_may_throw_before_loop(ptr %ptr, ptr %end) { |
| ; CHECK-LABEL: @pointer_select_may_throw_before_loop( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: call void @may_throw() |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| call void @may_throw() |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @pointer_select_may_throw_in_loop(ptr %ptr, ptr %end) { |
| ; CHECK-LABEL: @pointer_select_may_throw_in_loop( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: call void @may_throw() |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| call void @may_throw() |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |
| |
| define i32 @pointer_select_may_throw_after_loop(ptr %ptr, ptr %end) { |
| ; CHECK-LABEL: @pointer_select_may_throw_after_loop( |
| ; CHECK-NEXT: entry: |
| ; CHECK-NEXT: [[START_PTR:%.*]] = getelementptr inbounds i32, ptr [[PTR:%.*]], i64 1 |
| ; CHECK-NEXT: [[L_2_PRE:%.*]] = load i32, ptr [[PTR]], align 4 |
| ; CHECK-NEXT: br label [[LOOP:%.*]] |
| ; CHECK: loop: |
| ; CHECK-NEXT: [[L_2:%.*]] = phi i32 [ [[L_2_PRE]], [[ENTRY:%.*]] ], [ [[MIN_VAL:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[PTR_IV:%.*]] = phi ptr [ [[START_PTR]], [[ENTRY]] ], [ [[PTR_IV_NEXT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[MIN_PTR:%.*]] = phi ptr [ [[PTR]], [[ENTRY]] ], [ [[MIN_SELECT:%.*]], [[LOOP]] ] |
| ; CHECK-NEXT: [[L_1:%.*]] = load i32, ptr [[PTR_IV]], align 4 |
| ; CHECK-NEXT: [[CMP_1:%.*]] = icmp ult i32 [[L_1]], [[L_2]] |
| ; CHECK-NEXT: [[MIN_VAL]] = select i1 [[CMP_1]], i32 [[L_1]], i32 [[L_2]] |
| ; CHECK-NEXT: [[MIN_SELECT]] = select i1 [[CMP_1]], ptr [[PTR_IV]], ptr [[MIN_PTR]] |
| ; CHECK-NEXT: [[PTR_IV_NEXT]] = getelementptr inbounds i32, ptr [[PTR_IV]], i64 1 |
| ; CHECK-NEXT: [[EC:%.*]] = icmp eq ptr [[PTR_IV_NEXT]], [[END:%.*]] |
| ; CHECK-NEXT: br i1 [[EC]], label [[EXIT:%.*]], label [[LOOP]] |
| ; CHECK: exit: |
| ; CHECK-NEXT: call void @may_throw() |
| ; CHECK-NEXT: [[RES:%.*]] = load i32, ptr [[MIN_SELECT]], align 4 |
| ; CHECK-NEXT: ret i32 [[RES]] |
| ; |
| entry: |
| %start.ptr = getelementptr inbounds i32, ptr %ptr, i64 1 |
| %l.2.pre = load i32, ptr %ptr, align 4 |
| br label %loop |
| |
| loop: |
| %l.2 = phi i32 [ %l.2.pre, %entry ], [ %min.val, %loop ] |
| %ptr.iv = phi ptr [ %start.ptr, %entry ], [ %ptr.iv.next, %loop ] |
| %min.ptr = phi ptr [ %ptr, %entry ], [ %min.select, %loop ] |
| %l.1 = load i32, ptr %ptr.iv, align 4 |
| %cmp.1 = icmp ult i32 %l.1, %l.2 |
| %min.val = select i1 %cmp.1, i32 %l.1, i32 %l.2 |
| %min.select = select i1 %cmp.1, ptr %ptr.iv, ptr %min.ptr |
| %ptr.iv.next = getelementptr inbounds i32, ptr %ptr.iv, i64 1 |
| %ec = icmp eq ptr %ptr.iv.next, %end |
| br i1 %ec, label %exit, label %loop |
| |
| exit: |
| call void @may_throw() |
| %res = load i32, ptr %min.select, align 4 |
| ret i32 %res |
| } |