| ====================================== |
| Syntax of AMDGPU Instruction Modifiers |
| ====================================== |
| |
| .. contents:: |
| :local: |
| |
| Conventions |
| =========== |
| |
| The following notation is used throughout this document: |
| |
| =================== ============================================================= |
| Notation Description |
| =================== ============================================================= |
| {0..N} Any integer value in the range from 0 to N (inclusive). |
| <x> Syntax and meaning of *x* are explained elsewhere. |
| =================== ============================================================= |
| |
| .. _amdgpu_syn_modifiers: |
| |
| Modifiers |
| ========= |
| |
| DS Modifiers |
| ------------ |
| |
| .. _amdgpu_synid_ds_offset80: |
| |
| offset0 |
| ~~~~~~~ |
| |
| Specifies the first 8-bit offset, in bytes. The default value is 0. |
| |
| Used with DS instructions that expect two addresses. |
| |
| =================== ==================================================================== |
| Syntax Description |
| =================== ==================================================================== |
| offset0:{0..0xFF} Specifies an unsigned 8-bit offset as a positive |
| :ref:`integer number <amdgpu_synid_integer_number>` |
| or an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| =================== ==================================================================== |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| offset0:0xff |
| offset0:2-x |
| offset0:-x-y |
| |
| .. _amdgpu_synid_ds_offset81: |
| |
| offset1 |
| ~~~~~~~ |
| |
| Specifies the second 8-bit offset, in bytes. The default value is 0. |
| |
| Used with DS instructions that expect two addresses. |
| |
| =================== ==================================================================== |
| Syntax Description |
| =================== ==================================================================== |
| offset1:{0..0xFF} Specifies an unsigned 8-bit offset as a positive |
| :ref:`integer number <amdgpu_synid_integer_number>` |
| or an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| =================== ==================================================================== |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| offset1:0xff |
| offset1:2-x |
| offset1:-x-y |
| |
| .. _amdgpu_synid_ds_offset16: |
| |
| offset |
| ~~~~~~ |
| |
| Specifies a 16-bit offset, in bytes. The default value is 0. |
| |
| Used with DS instructions that expect a single address. |
| |
| ==================== ==================================================================== |
| Syntax Description |
| ==================== ==================================================================== |
| offset:{0..0xFFFF} Specifies an unsigned 16-bit offset as a positive |
| :ref:`integer number <amdgpu_synid_integer_number>` |
| or an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| ==================== ==================================================================== |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| offset:65535 |
| offset:0xffff |
| offset:-x-y |
| |
| .. _amdgpu_synid_sw_offset16: |
| |
| swizzle pattern |
| ~~~~~~~~~~~~~~~ |
| |
| This is a special modifier that may be used with *ds_swizzle_b32* instruction only. |
| It specifies a swizzle pattern in numeric or symbolic form. The default value is 0. |
| |
| ======================================================= =========================================================== |
| Syntax Description |
| ======================================================= =========================================================== |
| offset:{0..0xFFFF} Specifies a 16-bit swizzle pattern. |
| offset:swizzle(QUAD_PERM,{0..3},{0..3},{0..3},{0..3}) Specifies a quad permute mode pattern |
| |
| Each number is a lane *id*. |
| offset:swizzle(BITMASK_PERM, "<mask>") Specifies a bitmask permute mode pattern. |
| |
| The pattern converts a 5-bit lane *id* to another |
| lane *id* with which the lane interacts. |
| |
| The *mask* is a 5-character sequence which |
| specifies how to transform the bits of the |
| lane *id*. |
| |
| The following characters are allowed: |
| |
| * "0" - set bit to 0. |
| |
| * "1" - set bit to 1. |
| |
| * "p" - preserve bit. |
| |
| * "i" - inverse bit. |
| |
| offset:swizzle(BROADCAST,{2..32},{0..N}) Specifies a broadcast mode. |
| |
| Broadcasts the value of any particular lane to |
| all lanes in its group. |
| |
| The first numeric parameter is a group |
| size and must be equal to 2, 4, 8, 16 or 32. |
| |
| The second numeric parameter is an index of the |
| lane being broadcast. |
| |
| The index must not exceed group size. |
| offset:swizzle(SWAP,{1..16}) Specifies a swap mode. |
| |
| Swaps the neighboring groups of |
| 1, 2, 4, 8 or 16 lanes. |
| offset:swizzle(REVERSE,{2..32}) Specifies a reverse mode. |
| |
| Reverses the lanes for groups of 2, 4, 8, 16 or 32 lanes. |
| ======================================================= =========================================================== |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| offset:255 |
| offset:0xffff |
| offset:swizzle(QUAD_PERM, 0, 1, 2, 3) |
| offset:swizzle(BITMASK_PERM, "01pi0") |
| offset:swizzle(BROADCAST, 2, 0) |
| offset:swizzle(SWAP, 8) |
| offset:swizzle(REVERSE, 30 + 2) |
| |
| .. _amdgpu_synid_gds: |
| |
| gds |
| ~~~ |
| |
| Specifies whether to use GDS or LDS memory (LDS is the default). |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| gds Use GDS memory. |
| ======================================== ================================================ |
| |
| |
| EXP Modifiers |
| ------------- |
| |
| .. _amdgpu_synid_done: |
| |
| done |
| ~~~~ |
| |
| Specifies if this is the last export from the shader to the target. By default, |
| an *export* instruction does not finish an export sequence. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| done Indicates the last export operation. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_compr: |
| |
| compr |
| ~~~~~ |
| |
| Indicates if the data is compressed (data is not compressed by default). |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| compr Data is compressed. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_vm: |
| |
| vm |
| ~~ |
| |
| Specifies if the :ref:`exec<amdgpu_synid_exec>` mask is valid for this *export* instruction |
| (the mask is not valid by default). |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| vm Set the flag indicating a valid |
| :ref:`exec<amdgpu_synid_exec>` mask. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_row_en: |
| |
| row_en |
| ~~~~~~ |
| |
| Specifies whether to export one row or multiple rows of data. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| row_en Export multiple rows using row index from M0. |
| ======================================== ================================================ |
| |
| FLAT Modifiers |
| -------------- |
| |
| .. _amdgpu_synid_flat_offset12: |
| |
| offset12 |
| ~~~~~~~~ |
| |
| Specifies an immediate unsigned 12-bit offset, in bytes. The default value is 0. |
| |
| ================= ==================================================================== |
| Syntax Description |
| ================= ==================================================================== |
| offset:{0..4095} Specifies a 12-bit unsigned offset as a positive |
| :ref:`integer number <amdgpu_synid_integer_number>` |
| or an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| ================= ==================================================================== |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| offset:4095 |
| offset:x-0xff |
| |
| .. _amdgpu_synid_flat_offset13s: |
| |
| offset13s |
| ~~~~~~~~~ |
| |
| Specifies an immediate signed 13-bit offset, in bytes. The default value is 0. |
| |
| ===================== ==================================================================== |
| Syntax Description |
| ===================== ==================================================================== |
| offset:{-4096..4095} Specifies a 13-bit signed offset as an |
| :ref:`integer number <amdgpu_synid_integer_number>` |
| or an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| ===================== ==================================================================== |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| offset:-4000 |
| offset:0x10 |
| offset:-x |
| |
| .. _amdgpu_synid_flat_offset12s: |
| |
| offset12s |
| ~~~~~~~~~ |
| |
| Specifies an immediate signed 12-bit offset, in bytes. The default value is 0. |
| |
| ===================== ==================================================================== |
| Syntax Description |
| ===================== ==================================================================== |
| offset:{-2048..2047} Specifies a 12-bit signed offset as an |
| :ref:`integer number <amdgpu_synid_integer_number>` |
| or an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| ===================== ==================================================================== |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| offset:-2000 |
| offset:0x10 |
| offset:-x+y |
| |
| .. _amdgpu_synid_flat_offset11: |
| |
| offset11 |
| ~~~~~~~~ |
| |
| Specifies an immediate unsigned 11-bit offset, in bytes. The default value is 0. |
| |
| ================= ==================================================================== |
| Syntax Description |
| ================= ==================================================================== |
| offset:{0..2047} Specifies an 11-bit unsigned offset as a positive |
| :ref:`integer number <amdgpu_synid_integer_number>` |
| or an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| ================= ==================================================================== |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| offset:2047 |
| offset:x+0xff |
| |
| dlc |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_dlc>`. |
| |
| glc |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_glc>`. |
| |
| lds |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_lds>`. |
| |
| slc |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_slc>`. |
| |
| tfe |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_tfe>`. |
| |
| nv |
| ~~ |
| |
| See a description :ref:`here<amdgpu_synid_nv>`. |
| |
| sc0 |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_sc0>`. |
| |
| sc1 |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_sc1>`. |
| |
| nt |
| ~~ |
| |
| See a description :ref:`here<amdgpu_synid_nt>`. |
| |
| MIMG Modifiers |
| -------------- |
| |
| .. _amdgpu_synid_dmask: |
| |
| dmask |
| ~~~~~ |
| |
| Specifies which channels (image components) are used by the operation. |
| By default, no channels are used. |
| |
| =============== ==================================================================== |
| Syntax Description |
| =============== ==================================================================== |
| dmask:{0..15} Specifies image channels as a positive |
| :ref:`integer number <amdgpu_synid_integer_number>` |
| or an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| |
| Each bit corresponds to one of 4 image components (RGBA). |
| |
| If the specified bit value is 0, the image component is not used, |
| while value 1 means that the component is used. |
| =============== ==================================================================== |
| |
| This modifier has some limitations depending on the instruction kind: |
| |
| =================================================== ======================== |
| Instruction Kind Valid dmask Values |
| =================================================== ======================== |
| 32-bit atomic *cmpswap* 0x3 |
| 32-bit atomic instructions except for *cmpswap* 0x1 |
| 64-bit atomic *cmpswap* 0xF |
| 64-bit atomic instructions except for *cmpswap* 0x3 |
| *gather4* 0x1, 0x2, 0x4, 0x8 |
| GFX11+ *msaa_load* 0x1, 0x2, 0x4, 0x8 |
| Other instructions any value |
| =================================================== ======================== |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| dmask:0xf |
| dmask:0b1111 |
| dmask:x|y|z |
| |
| .. _amdgpu_synid_unorm: |
| |
| unorm |
| ~~~~~ |
| |
| Specifies whether the address is normalized or not (the address is normalized by default). |
| |
| ======================== ======================================== |
| Syntax Description |
| ======================== ======================================== |
| unorm Force the address to be not normalized. |
| ======================== ======================================== |
| |
| glc |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_glc>`. |
| |
| slc |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_slc>`. |
| |
| .. _amdgpu_synid_r128: |
| |
| r128 |
| ~~~~ |
| |
| Specifies texture resource size. The default size is 256 bits. |
| |
| =================== ================================================ |
| Syntax Description |
| =================== ================================================ |
| r128 Specifies 128 bits texture resource size. |
| =================== ================================================ |
| |
| .. WARNING:: Using this modifier shall decrease *rsrc* operand size from 8 to 4 dwords, \ |
| but assembler does not currently support this feature. |
| |
| tfe |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_tfe>`. |
| |
| .. _amdgpu_synid_lwe: |
| |
| lwe |
| ~~~ |
| |
| Specifies LOD warning status (LOD warning is disabled by default). |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| lwe Enables LOD warning. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_da: |
| |
| da |
| ~~ |
| |
| Specifies if an array index must be sent to TA. By default, the array index is not sent. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| da Send an array index to TA. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_d16: |
| |
| d16 |
| ~~~ |
| |
| Specifies data size: 16 or 32 bits (32 bits by default). |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| d16 Enables 16-bits data mode. |
| |
| On loads, convert data in memory to 16-bit |
| format before storing it in VGPRs. |
| |
| For stores, convert 16-bit data in VGPRs to |
| 32 bits before writing the values to memory. |
| |
| Note that GFX8.0 does not support data packing. |
| Each 16-bit data element occupies 1 VGPR. |
| |
| GFX8.1 and GFX9+ support data packing. |
| Each pair of 16-bit data elements |
| occupies 1 VGPR. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_a16: |
| |
| a16 |
| ~~~ |
| |
| Specifies the size of image address components: 16 or 32 bits (32 bits by default). |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| a16 Enables 16-bits image address components. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_dim: |
| |
| dim |
| ~~~ |
| |
| Specifies surface dimension. This is a mandatory modifier. There is no default value. |
| |
| =============================== ========================================================= |
| Syntax Description |
| =============================== ========================================================= |
| dim:1D One-dimensional image. |
| dim:2D Two-dimensional image. |
| dim:3D Three-dimensional image. |
| dim:CUBE Cubemap array. |
| dim:1D_ARRAY One-dimensional image array. |
| dim:2D_ARRAY Two-dimensional image array. |
| dim:2D_MSAA Two-dimensional multi-sample auto-aliasing image. |
| dim:2D_MSAA_ARRAY Two-dimensional multi-sample auto-aliasing image array. |
| =============================== ========================================================= |
| |
| The following table defines an alternative syntax which is supported |
| for compatibility with SP3 assembler: |
| |
| =============================== ========================================================= |
| Syntax Description |
| =============================== ========================================================= |
| dim:SQ_RSRC_IMG_1D One-dimensional image. |
| dim:SQ_RSRC_IMG_2D Two-dimensional image. |
| dim:SQ_RSRC_IMG_3D Three-dimensional image. |
| dim:SQ_RSRC_IMG_CUBE Cubemap array. |
| dim:SQ_RSRC_IMG_1D_ARRAY One-dimensional image array. |
| dim:SQ_RSRC_IMG_2D_ARRAY Two-dimensional image array. |
| dim:SQ_RSRC_IMG_2D_MSAA Two-dimensional multi-sample auto-aliasing image. |
| dim:SQ_RSRC_IMG_2D_MSAA_ARRAY Two-dimensional multi-sample auto-aliasing image array. |
| =============================== ========================================================= |
| |
| dlc |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_dlc>`. |
| |
| Miscellaneous Modifiers |
| ----------------------- |
| |
| .. _amdgpu_synid_dlc: |
| |
| dlc |
| ~~~ |
| |
| Controls device level cache policy for memory operations. Used for synchronization. |
| When specified, forces operation to bypass device level cache, making the operation device |
| level coherent. By default, instructions use device level cache. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| dlc Bypass device level cache. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_glc: |
| |
| glc |
| ~~~ |
| |
| For atomic opcodes, this modifier indicates that the instruction returns the value from memory |
| before the operation. For other opcodes, it is used together with :ref:`slc<amdgpu_synid_slc>` |
| to specify cache policy. |
| |
| The default value is off (0). |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| glc Set glc bit to 1. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_lds: |
| |
| lds |
| ~~~ |
| |
| Specifies where to store the result: VGPRs or LDS (VGPRs by default). |
| |
| ======================================== =========================== |
| Syntax Description |
| ======================================== =========================== |
| lds Store the result in LDS. |
| ======================================== =========================== |
| |
| .. _amdgpu_synid_nv: |
| |
| nv |
| ~~ |
| |
| Specifies if the instruction is operating on non-volatile memory. |
| By default, memory is volatile. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| nv Indicates that the instruction operates on |
| non-volatile memory. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_slc: |
| |
| slc |
| ~~~ |
| |
| Controls behavior of L2 cache. The default value is off (0). |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| slc Set slc bit to 1. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_tfe: |
| |
| tfe |
| ~~~ |
| |
| Controls access to partially resident textures. The default value is off (0). |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| tfe Set tfe bit to 1. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_sc0: |
| |
| sc0 |
| ~~~ |
| |
| For atomic opcodes, this modifier indicates that the instruction returns the value from memory |
| before the operation. For other opcodes, it is used together with :ref:`sc1<amdgpu_synid_sc1>` |
| to specify cache policy. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| sc0 Set sc0 bit to 1. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_sc1: |
| |
| sc1 |
| ~~~ |
| |
| This modifier is used together with :ref:`sc0<amdgpu_synid_sc0>` to specify cache |
| policy. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| sc1 Set sc1 bit to 1. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_nt: |
| |
| nt |
| ~~ |
| |
| Indicates an operation with non-temporal data. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| nt Set nt bit to 1. |
| ======================================== ================================================ |
| |
| MUBUF/MTBUF Modifiers |
| --------------------- |
| |
| .. _amdgpu_synid_idxen: |
| |
| idxen |
| ~~~~~ |
| |
| Specifies whether address components include an index. By default, the index is not used. |
| |
| May be used together with :ref:`offen<amdgpu_synid_offen>`. |
| |
| Cannot be used with :ref:`addr64<amdgpu_synid_addr64>`. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| idxen Address components include an index. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_offen: |
| |
| offen |
| ~~~~~ |
| |
| Specifies whether address components include an offset. By default, the offset is not used. |
| |
| May be used together with :ref:`idxen<amdgpu_synid_idxen>`. |
| |
| Cannot be used with :ref:`addr64<amdgpu_synid_addr64>`. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| offen Address components include an offset. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_addr64: |
| |
| addr64 |
| ~~~~~~ |
| |
| Specifies whether a 64-bit address is used. By default, no address is used. |
| |
| Cannot be used with :ref:`offen<amdgpu_synid_offen>` and |
| :ref:`idxen<amdgpu_synid_idxen>` modifiers. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| addr64 A 64-bit address is used. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_buf_offset12: |
| |
| offset12 |
| ~~~~~~~~ |
| |
| Specifies an immediate unsigned 12-bit offset, in bytes. The default value is 0. |
| |
| ================== ==================================================================== |
| Syntax Description |
| ================== ==================================================================== |
| offset:{0..0xFFF} Specifies a 12-bit unsigned offset as a positive |
| :ref:`integer number <amdgpu_synid_integer_number>` |
| or an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| ================== ==================================================================== |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| offset:x+y |
| offset:0x10 |
| |
| glc |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_glc>`. |
| |
| slc |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_slc>`. |
| |
| lds |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_lds>`. |
| |
| dlc |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_dlc>`. |
| |
| tfe |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_tfe>`. |
| |
| .. _amdgpu_synid_fmt: |
| |
| fmt |
| ~~~ |
| |
| Specifies data and numeric formats used by the operation. |
| The default numeric format is BUF_NUM_FORMAT_UNORM. |
| The default data format is BUF_DATA_FORMAT_8. |
| |
| ========================================= =============================================================== |
| Syntax Description |
| ========================================= =============================================================== |
| format:{0..127} Use a format specified as either an |
| :ref:`integer number<amdgpu_synid_integer_number>` or an |
| :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| format:[<data format>] Use the specified data format and |
| default numeric format. |
| format:[<numeric format>] Use the specified numeric format and |
| default data format. |
| format:[<data format>,<numeric format>] Use the specified data and numeric formats. |
| format:[<numeric format>,<data format>] Use the specified data and numeric formats. |
| ========================================= =============================================================== |
| |
| .. _amdgpu_synid_format_data: |
| |
| Supported data formats are defined in the following table: |
| |
| ========================================= =============================== |
| Syntax Note |
| ========================================= =============================== |
| BUF_DATA_FORMAT_INVALID |
| BUF_DATA_FORMAT_8 The default value. |
| BUF_DATA_FORMAT_16 |
| BUF_DATA_FORMAT_8_8 |
| BUF_DATA_FORMAT_32 |
| BUF_DATA_FORMAT_16_16 |
| BUF_DATA_FORMAT_10_11_11 |
| BUF_DATA_FORMAT_11_11_10 |
| BUF_DATA_FORMAT_10_10_10_2 |
| BUF_DATA_FORMAT_2_10_10_10 |
| BUF_DATA_FORMAT_8_8_8_8 |
| BUF_DATA_FORMAT_32_32 |
| BUF_DATA_FORMAT_16_16_16_16 |
| BUF_DATA_FORMAT_32_32_32 |
| BUF_DATA_FORMAT_32_32_32_32 |
| BUF_DATA_FORMAT_RESERVED_15 |
| ========================================= =============================== |
| |
| .. _amdgpu_synid_format_num: |
| |
| Supported numeric formats are defined below: |
| |
| ========================================= =============================== |
| Syntax Note |
| ========================================= =============================== |
| BUF_NUM_FORMAT_UNORM The default value. |
| BUF_NUM_FORMAT_SNORM |
| BUF_NUM_FORMAT_USCALED |
| BUF_NUM_FORMAT_SSCALED |
| BUF_NUM_FORMAT_UINT |
| BUF_NUM_FORMAT_SINT |
| BUF_NUM_FORMAT_SNORM_OGL GFX7 only. |
| BUF_NUM_FORMAT_RESERVED_6 GFX8 and GFX9 only. |
| BUF_NUM_FORMAT_FLOAT |
| ========================================= =============================== |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| format:0 |
| format:127 |
| format:[BUF_DATA_FORMAT_16] |
| format:[BUF_DATA_FORMAT_16,BUF_NUM_FORMAT_SSCALED] |
| format:[BUF_NUM_FORMAT_FLOAT] |
| |
| .. _amdgpu_synid_ufmt: |
| |
| ufmt |
| ~~~~ |
| |
| Specifies a unified format used by the operation. |
| The default format is BUF_FMT_8_UNORM. |
| |
| ========================================= =============================================================== |
| Syntax Description |
| ========================================= =============================================================== |
| format:{0..127} Use a unified format specified as either an |
| :ref:`integer number<amdgpu_synid_integer_number>` or an |
| :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| Note that unified format numbers are incompatible with |
| format numbers used for pre-GFX10 ISA. |
| format:[<unified format>] Use the specified unified format. |
| ========================================= =============================================================== |
| |
| Unified format is a replacement for :ref:`data<amdgpu_synid_format_data>` |
| and :ref:`numeric<amdgpu_synid_format_num>` formats. For compatibility with older ISA, |
| :ref:`the syntax with data and numeric formats<amdgpu_synid_fmt>` is still accepted |
| provided that the combination of formats can be mapped to a unified format. |
| |
| Supported unified formats and equivalent combinations of data and numeric formats |
| are defined below: |
| |
| ============================== ============================== ============================= ============ |
| Unified Format Syntax Equivalent Data Format Equivalent Numeric Format Note |
| ============================== ============================== ============================= ============ |
| BUF_FMT_INVALID BUF_DATA_FORMAT_INVALID BUF_NUM_FORMAT_UNORM |
| |
| BUF_FMT_8_UNORM BUF_DATA_FORMAT_8 BUF_NUM_FORMAT_UNORM |
| BUF_FMT_8_SNORM BUF_DATA_FORMAT_8 BUF_NUM_FORMAT_SNORM |
| BUF_FMT_8_USCALED BUF_DATA_FORMAT_8 BUF_NUM_FORMAT_USCALED |
| BUF_FMT_8_SSCALED BUF_DATA_FORMAT_8 BUF_NUM_FORMAT_SSCALED |
| BUF_FMT_8_UINT BUF_DATA_FORMAT_8 BUF_NUM_FORMAT_UINT |
| BUF_FMT_8_SINT BUF_DATA_FORMAT_8 BUF_NUM_FORMAT_SINT |
| |
| BUF_FMT_16_UNORM BUF_DATA_FORMAT_16 BUF_NUM_FORMAT_UNORM |
| BUF_FMT_16_SNORM BUF_DATA_FORMAT_16 BUF_NUM_FORMAT_SNORM |
| BUF_FMT_16_USCALED BUF_DATA_FORMAT_16 BUF_NUM_FORMAT_USCALED |
| BUF_FMT_16_SSCALED BUF_DATA_FORMAT_16 BUF_NUM_FORMAT_SSCALED |
| BUF_FMT_16_UINT BUF_DATA_FORMAT_16 BUF_NUM_FORMAT_UINT |
| BUF_FMT_16_SINT BUF_DATA_FORMAT_16 BUF_NUM_FORMAT_SINT |
| BUF_FMT_16_FLOAT BUF_DATA_FORMAT_16 BUF_NUM_FORMAT_FLOAT |
| |
| BUF_FMT_8_8_UNORM BUF_DATA_FORMAT_8_8 BUF_NUM_FORMAT_UNORM |
| BUF_FMT_8_8_SNORM BUF_DATA_FORMAT_8_8 BUF_NUM_FORMAT_SNORM |
| BUF_FMT_8_8_USCALED BUF_DATA_FORMAT_8_8 BUF_NUM_FORMAT_USCALED |
| BUF_FMT_8_8_SSCALED BUF_DATA_FORMAT_8_8 BUF_NUM_FORMAT_SSCALED |
| BUF_FMT_8_8_UINT BUF_DATA_FORMAT_8_8 BUF_NUM_FORMAT_UINT |
| BUF_FMT_8_8_SINT BUF_DATA_FORMAT_8_8 BUF_NUM_FORMAT_SINT |
| |
| BUF_FMT_32_UINT BUF_DATA_FORMAT_32 BUF_NUM_FORMAT_UINT |
| BUF_FMT_32_SINT BUF_DATA_FORMAT_32 BUF_NUM_FORMAT_SINT |
| BUF_FMT_32_FLOAT BUF_DATA_FORMAT_32 BUF_NUM_FORMAT_FLOAT |
| |
| BUF_FMT_16_16_UNORM BUF_DATA_FORMAT_16_16 BUF_NUM_FORMAT_UNORM |
| BUF_FMT_16_16_SNORM BUF_DATA_FORMAT_16_16 BUF_NUM_FORMAT_SNORM |
| BUF_FMT_16_16_USCALED BUF_DATA_FORMAT_16_16 BUF_NUM_FORMAT_USCALED |
| BUF_FMT_16_16_SSCALED BUF_DATA_FORMAT_16_16 BUF_NUM_FORMAT_SSCALED |
| BUF_FMT_16_16_UINT BUF_DATA_FORMAT_16_16 BUF_NUM_FORMAT_UINT |
| BUF_FMT_16_16_SINT BUF_DATA_FORMAT_16_16 BUF_NUM_FORMAT_SINT |
| BUF_FMT_16_16_FLOAT BUF_DATA_FORMAT_16_16 BUF_NUM_FORMAT_FLOAT |
| |
| BUF_FMT_10_11_11_UNORM BUF_DATA_FORMAT_10_11_11 BUF_NUM_FORMAT_UNORM GFX10 only |
| BUF_FMT_10_11_11_SNORM BUF_DATA_FORMAT_10_11_11 BUF_NUM_FORMAT_SNORM GFX10 only |
| BUF_FMT_10_11_11_USCALED BUF_DATA_FORMAT_10_11_11 BUF_NUM_FORMAT_USCALED GFX10 only |
| BUF_FMT_10_11_11_SSCALED BUF_DATA_FORMAT_10_11_11 BUF_NUM_FORMAT_SSCALED GFX10 only |
| BUF_FMT_10_11_11_UINT BUF_DATA_FORMAT_10_11_11 BUF_NUM_FORMAT_UINT GFX10 only |
| BUF_FMT_10_11_11_SINT BUF_DATA_FORMAT_10_11_11 BUF_NUM_FORMAT_SINT GFX10 only |
| BUF_FMT_10_11_11_FLOAT BUF_DATA_FORMAT_10_11_11 BUF_NUM_FORMAT_FLOAT |
| |
| BUF_FMT_11_11_10_UNORM BUF_DATA_FORMAT_11_11_10 BUF_NUM_FORMAT_UNORM GFX10 only |
| BUF_FMT_11_11_10_SNORM BUF_DATA_FORMAT_11_11_10 BUF_NUM_FORMAT_SNORM GFX10 only |
| BUF_FMT_11_11_10_USCALED BUF_DATA_FORMAT_11_11_10 BUF_NUM_FORMAT_USCALED GFX10 only |
| BUF_FMT_11_11_10_SSCALED BUF_DATA_FORMAT_11_11_10 BUF_NUM_FORMAT_SSCALED GFX10 only |
| BUF_FMT_11_11_10_UINT BUF_DATA_FORMAT_11_11_10 BUF_NUM_FORMAT_UINT GFX10 only |
| BUF_FMT_11_11_10_SINT BUF_DATA_FORMAT_11_11_10 BUF_NUM_FORMAT_SINT GFX10 only |
| BUF_FMT_11_11_10_FLOAT BUF_DATA_FORMAT_11_11_10 BUF_NUM_FORMAT_FLOAT |
| |
| BUF_FMT_10_10_10_2_UNORM BUF_DATA_FORMAT_10_10_10_2 BUF_NUM_FORMAT_UNORM |
| BUF_FMT_10_10_10_2_SNORM BUF_DATA_FORMAT_10_10_10_2 BUF_NUM_FORMAT_SNORM |
| BUF_FMT_10_10_10_2_USCALED BUF_DATA_FORMAT_10_10_10_2 BUF_NUM_FORMAT_USCALED GFX10 only |
| BUF_FMT_10_10_10_2_SSCALED BUF_DATA_FORMAT_10_10_10_2 BUF_NUM_FORMAT_SSCALED GFX10 only |
| BUF_FMT_10_10_10_2_UINT BUF_DATA_FORMAT_10_10_10_2 BUF_NUM_FORMAT_UINT |
| BUF_FMT_10_10_10_2_SINT BUF_DATA_FORMAT_10_10_10_2 BUF_NUM_FORMAT_SINT |
| |
| BUF_FMT_2_10_10_10_UNORM BUF_DATA_FORMAT_2_10_10_10 BUF_NUM_FORMAT_UNORM |
| BUF_FMT_2_10_10_10_SNORM BUF_DATA_FORMAT_2_10_10_10 BUF_NUM_FORMAT_SNORM |
| BUF_FMT_2_10_10_10_USCALED BUF_DATA_FORMAT_2_10_10_10 BUF_NUM_FORMAT_USCALED |
| BUF_FMT_2_10_10_10_SSCALED BUF_DATA_FORMAT_2_10_10_10 BUF_NUM_FORMAT_SSCALED |
| BUF_FMT_2_10_10_10_UINT BUF_DATA_FORMAT_2_10_10_10 BUF_NUM_FORMAT_UINT |
| BUF_FMT_2_10_10_10_SINT BUF_DATA_FORMAT_2_10_10_10 BUF_NUM_FORMAT_SINT |
| |
| BUF_FMT_8_8_8_8_UNORM BUF_DATA_FORMAT_8_8_8_8 BUF_NUM_FORMAT_UNORM |
| BUF_FMT_8_8_8_8_SNORM BUF_DATA_FORMAT_8_8_8_8 BUF_NUM_FORMAT_SNORM |
| BUF_FMT_8_8_8_8_USCALED BUF_DATA_FORMAT_8_8_8_8 BUF_NUM_FORMAT_USCALED |
| BUF_FMT_8_8_8_8_SSCALED BUF_DATA_FORMAT_8_8_8_8 BUF_NUM_FORMAT_SSCALED |
| BUF_FMT_8_8_8_8_UINT BUF_DATA_FORMAT_8_8_8_8 BUF_NUM_FORMAT_UINT |
| BUF_FMT_8_8_8_8_SINT BUF_DATA_FORMAT_8_8_8_8 BUF_NUM_FORMAT_SINT |
| |
| BUF_FMT_32_32_UINT BUF_DATA_FORMAT_32_32 BUF_NUM_FORMAT_UINT |
| BUF_FMT_32_32_SINT BUF_DATA_FORMAT_32_32 BUF_NUM_FORMAT_SINT |
| BUF_FMT_32_32_FLOAT BUF_DATA_FORMAT_32_32 BUF_NUM_FORMAT_FLOAT |
| |
| BUF_FMT_16_16_16_16_UNORM BUF_DATA_FORMAT_16_16_16_16 BUF_NUM_FORMAT_UNORM |
| BUF_FMT_16_16_16_16_SNORM BUF_DATA_FORMAT_16_16_16_16 BUF_NUM_FORMAT_SNORM |
| BUF_FMT_16_16_16_16_USCALED BUF_DATA_FORMAT_16_16_16_16 BUF_NUM_FORMAT_USCALED |
| BUF_FMT_16_16_16_16_SSCALED BUF_DATA_FORMAT_16_16_16_16 BUF_NUM_FORMAT_SSCALED |
| BUF_FMT_16_16_16_16_UINT BUF_DATA_FORMAT_16_16_16_16 BUF_NUM_FORMAT_UINT |
| BUF_FMT_16_16_16_16_SINT BUF_DATA_FORMAT_16_16_16_16 BUF_NUM_FORMAT_SINT |
| BUF_FMT_16_16_16_16_FLOAT BUF_DATA_FORMAT_16_16_16_16 BUF_NUM_FORMAT_FLOAT |
| |
| BUF_FMT_32_32_32_UINT BUF_DATA_FORMAT_32_32_32 BUF_NUM_FORMAT_UINT |
| BUF_FMT_32_32_32_SINT BUF_DATA_FORMAT_32_32_32 BUF_NUM_FORMAT_SINT |
| BUF_FMT_32_32_32_FLOAT BUF_DATA_FORMAT_32_32_32 BUF_NUM_FORMAT_FLOAT |
| BUF_FMT_32_32_32_32_UINT BUF_DATA_FORMAT_32_32_32_32 BUF_NUM_FORMAT_UINT |
| BUF_FMT_32_32_32_32_SINT BUF_DATA_FORMAT_32_32_32_32 BUF_NUM_FORMAT_SINT |
| BUF_FMT_32_32_32_32_FLOAT BUF_DATA_FORMAT_32_32_32_32 BUF_NUM_FORMAT_FLOAT |
| ============================== ============================== ============================= ============ |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| format:0 |
| format:[BUF_FMT_32_UINT] |
| |
| SMRD/SMEM Modifiers |
| ------------------- |
| |
| glc |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_glc>`. |
| |
| nv |
| ~~ |
| |
| See a description :ref:`here<amdgpu_synid_nv>`. |
| |
| dlc |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_dlc>`. |
| |
| .. _amdgpu_synid_smem_offset20u: |
| |
| offset20u |
| ~~~~~~~~~ |
| |
| Specifies an unsigned 20-bit offset, in bytes. The default value is 0. |
| |
| ==================== ==================================================================== |
| Syntax Description |
| ==================== ==================================================================== |
| offset:{0..0xFFFFF} Specifies an offset as a positive |
| :ref:`integer number <amdgpu_synid_integer_number>` |
| or an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| ==================== ==================================================================== |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| offset:1 |
| offset:0xfffff |
| offset:x-y |
| |
| .. _amdgpu_synid_smem_offset21s: |
| |
| offset21s |
| ~~~~~~~~~ |
| |
| Specifies a signed 21-bit offset, in bytes. The default value is 0. |
| |
| ============================= ==================================================================== |
| Syntax Description |
| ============================= ==================================================================== |
| offset:{-0x100000..0xFFFFF} Specifies an offset as an |
| :ref:`integer number <amdgpu_synid_integer_number>` |
| or an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| ============================= ==================================================================== |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| offset:-1 |
| offset:0xfffff |
| offset:-x |
| |
| VINTRP/VINTERP/LDSDIR Modifiers |
| ------------------------------- |
| |
| .. _amdgpu_synid_high: |
| |
| high |
| ~~~~ |
| |
| Specifies which half of the LDS word to use. Low half of LDS word is used by default. |
| |
| ======================================== ================================ |
| Syntax Description |
| ======================================== ================================ |
| high Use the high half of LDS word. |
| ======================================== ================================ |
| |
| neg |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_neg>`. |
| |
| .. _amdgpu_synid_wait_exp: |
| |
| wait_exp |
| ~~~~~~~~ |
| |
| Specifies a wait on the EXP counter before issuing the current instruction. |
| The counter must be less than or equal to this value before the instruction is issued. |
| If set to 7, no wait is performed. |
| |
| The default value is zero. This is a safe value, but it may be suboptimal. |
| |
| ================ ====================================================== |
| Syntax Description |
| ================ ====================================================== |
| wait_exp:{0..7} An additional wait on the EXP counter before |
| issuing this instruction. |
| ================ ====================================================== |
| |
| .. _amdgpu_synid_wait_vdst: |
| |
| wait_vdst |
| ~~~~~~~~~ |
| |
| Specifies a wait on the VA_VDST counter before issuing the current instruction. |
| The counter must be less than or equal to this value before the instruction is issued. |
| If set to 15, no wait is performed. |
| |
| The default value is zero. This is a safe value, but it may be suboptimal. |
| |
| ================== ====================================================== |
| Syntax Description |
| ================== ====================================================== |
| wait_vdst:{0..15} An additional wait on the VA_VDST counter before |
| issuing this instruction. |
| ================== ====================================================== |
| |
| DPP8 Modifiers |
| -------------- |
| |
| .. _amdgpu_synid_dpp8_sel: |
| |
| dpp8_sel |
| ~~~~~~~~ |
| |
| Selects which lanes to pull data from, within a group of 8 lanes. This is a mandatory modifier. |
| There is no default value. |
| |
| The *dpp8_sel* modifier must specify exactly 8 values. |
| The first value selects which lane to read from to supply data into lane 0. |
| The second value controls lane 1 and so on. |
| |
| Each value may be specified as either |
| an :ref:`integer number<amdgpu_synid_integer_number>` or |
| an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| |
| =============================================================== =========================== |
| Syntax Description |
| =============================================================== =========================== |
| dpp8:[{0..7},{0..7},{0..7},{0..7},{0..7},{0..7},{0..7},{0..7}] Select lanes to read from. |
| =============================================================== =========================== |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| dpp8:[7,6,5,4,3,2,1,0] |
| dpp8:[0,1,0,1,0,1,0,1] |
| |
| .. _amdgpu_synid_fi8: |
| |
| fi |
| ~~ |
| |
| Controls interaction with inactive lanes for *dpp8* instructions. The default value is zero. |
| |
| Note: *inactive* lanes are those whose :ref:`exec<amdgpu_synid_exec>` mask bit is zero. |
| |
| ==================================== ===================================================== |
| Syntax Description |
| ==================================== ===================================================== |
| fi:0 Fetch zero when accessing data from inactive lanes. |
| fi:1 Fetch pre-existing values from inactive lanes. |
| ==================================== ===================================================== |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| DPP Modifiers |
| ------------- |
| |
| .. _amdgpu_synid_dpp_ctrl: |
| |
| dpp_ctrl |
| ~~~~~~~~ |
| |
| Specifies how data is shared between threads. This is a mandatory modifier. |
| There is no default value. |
| |
| Note: the lanes of a wavefront are organized in four *rows* and four *banks*. |
| |
| ======================================== ======================================================== |
| Syntax Description |
| ======================================== ======================================================== |
| quad_perm:[{0..3},{0..3},{0..3},{0..3}] Full permute of 4 threads. |
| row_mirror Mirror threads within row. |
| row_half_mirror Mirror threads within 1/2 row (8 threads). |
| row_bcast:15 Broadcast the 15th thread of each row to the next row. |
| row_bcast:31 Broadcast thread 31 to rows 2 and 3. |
| wave_shl:1 Wavefront left shift by 1 thread. |
| wave_rol:1 Wavefront left rotate by 1 thread. |
| wave_shr:1 Wavefront right shift by 1 thread. |
| wave_ror:1 Wavefront right rotate by 1 thread. |
| row_shl:{1..15} Row shift left by 1-15 threads. |
| row_shr:{1..15} Row shift right by 1-15 threads. |
| row_ror:{1..15} Row rotate right by 1-15 threads. |
| ======================================== ======================================================== |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| quad_perm:[0, 1, 2, 3] |
| row_shl:3 |
| |
| .. _amdgpu_synid_dpp16_ctrl: |
| |
| dpp16_ctrl |
| ~~~~~~~~~~ |
| |
| Specifies how data is shared between threads. This is a mandatory modifier. |
| There is no default value. |
| |
| Note: the lanes of a wavefront are organized in four *rows* and four *banks*. |
| (There are only two rows in *wave32* mode.) |
| |
| ======================================== ======================================================= |
| Syntax Description |
| ======================================== ======================================================= |
| quad_perm:[{0..3},{0..3},{0..3},{0..3}] Full permute of 4 threads. |
| row_mirror Mirror threads within row. |
| row_half_mirror Mirror threads within 1/2 row (8 threads). |
| row_share:{0..15} Share the value from the specified lane with other |
| lanes in the row. |
| row_xmask:{0..15} Fetch from XOR(<current lane id>,<specified lane id>). |
| row_shl:{1..15} Row shift left by 1-15 threads. |
| row_shr:{1..15} Row shift right by 1-15 threads. |
| row_ror:{1..15} Row rotate right by 1-15 threads. |
| ======================================== ======================================================= |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| quad_perm:[0, 1, 2, 3] |
| row_shl:3 |
| |
| .. _amdgpu_synid_dpp32_ctrl: |
| |
| dpp32_ctrl |
| ~~~~~~~~~~ |
| |
| Specifies how data is shared between threads. This is a mandatory modifier. |
| There is no default value. |
| |
| Note: the lanes of a wavefront are organized in four *rows* and four *banks*. |
| |
| ======================================== ========================================================= |
| Syntax Description |
| ======================================== ========================================================= |
| quad_perm:[{0..3},{0..3},{0..3},{0..3}] Full permute of 4 threads. |
| row_mirror Mirror threads within row. |
| row_half_mirror Mirror threads within 1/2 row (8 threads). |
| row_bcast:15 Broadcast the 15th thread of each row to the next row. |
| row_bcast:31 Broadcast thread 31 to rows 2 and 3. |
| wave_shl:1 Wavefront left shift by 1 thread. |
| wave_rol:1 Wavefront left rotate by 1 thread. |
| wave_shr:1 Wavefront right shift by 1 thread. |
| wave_ror:1 Wavefront right rotate by 1 thread. |
| row_shl:{1..15} Row shift left by 1-15 threads. |
| row_shr:{1..15} Row shift right by 1-15 threads. |
| row_ror:{1..15} Row rotate right by 1-15 threads. |
| row_newbcast:{1..15} Broadcast a thread within a row to the whole row. |
| ======================================== ========================================================= |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| quad_perm:[0, 1, 2, 3] |
| row_shl:3 |
| |
| |
| .. _amdgpu_synid_dpp64_ctrl: |
| |
| dpp64_ctrl |
| ~~~~~~~~~~ |
| |
| Specifies how data is shared between threads. This is a mandatory modifier. |
| There is no default value. |
| |
| Note: the lanes of a wavefront are organized in four *rows* and four *banks*. |
| |
| ======================================== ================================================== |
| Syntax Description |
| ======================================== ================================================== |
| row_newbcast:{1..15} Broadcast a thread within a row to the whole row. |
| ======================================== ================================================== |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| row_newbcast:3 |
| |
| |
| .. _amdgpu_synid_row_mask: |
| |
| row_mask |
| ~~~~~~~~ |
| |
| Controls which rows are enabled for data sharing. By default, all rows are enabled. |
| |
| Note: the lanes of a wavefront are organized in four *rows* and four *banks*. |
| (There are only two rows in *wave32* mode.) |
| |
| ================= ==================================================================== |
| Syntax Description |
| ================= ==================================================================== |
| row_mask:{0..15} Specifies a *row mask* as a positive |
| :ref:`integer number <amdgpu_synid_integer_number>` |
| or an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| |
| Each of the 4 bits in the mask controls one row |
| (0 - disabled, 1 - enabled). |
| |
| In *wave32* mode, the values shall be limited to {0..7}. |
| ================= ==================================================================== |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| row_mask:0xf |
| row_mask:0b1010 |
| row_mask:x|y |
| |
| .. _amdgpu_synid_bank_mask: |
| |
| bank_mask |
| ~~~~~~~~~ |
| |
| Controls which banks are enabled for data sharing. By default, all banks are enabled. |
| |
| Note: the lanes of a wavefront are organized in four *rows* and four *banks*. |
| (There are only two rows in *wave32* mode.) |
| |
| ================== ==================================================================== |
| Syntax Description |
| ================== ==================================================================== |
| bank_mask:{0..15} Specifies a *bank mask* as a positive |
| :ref:`integer number <amdgpu_synid_integer_number>` |
| or an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| |
| Each of the 4 bits in the mask controls one bank |
| (0 - disabled, 1 - enabled). |
| ================== ==================================================================== |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| bank_mask:0x3 |
| bank_mask:0b0011 |
| bank_mask:x&y |
| |
| .. _amdgpu_synid_bound_ctrl: |
| |
| bound_ctrl |
| ~~~~~~~~~~ |
| |
| Controls data sharing when accessing an invalid lane. By default, data sharing with |
| invalid lanes is disabled. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| bound_ctrl:1 Enables data sharing with invalid lanes. |
| |
| Accessing data from an invalid lane will |
| return zero. |
| |
| bound_ctrl:0 (GFX11+) Disables data sharing with invalid lanes. |
| ======================================== ================================================ |
| |
| .. WARNING:: For historical reasons, *bound_ctrl:0* has the same meaning as *bound_ctrl:1* for older architectures. |
| |
| .. _amdgpu_synid_fi16: |
| |
| fi |
| ~~ |
| |
| Controls interaction with *inactive* lanes for *dpp16* instructions. The default value is zero. |
| |
| Note: *inactive* lanes are those whose :ref:`exec<amdgpu_synid_exec>` mask bit is zero. |
| |
| ======================================== ================================================== |
| Syntax Description |
| ======================================== ================================================== |
| fi:0 Interaction with inactive lanes is controlled by |
| :ref:`bound_ctrl<amdgpu_synid_bound_ctrl>`. |
| |
| fi:1 Fetch pre-existing values from inactive lanes. |
| ======================================== ================================================== |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| SDWA Modifiers |
| -------------- |
| |
| clamp |
| ~~~~~ |
| |
| See a description :ref:`here<amdgpu_synid_clamp>`. |
| |
| omod |
| ~~~~ |
| |
| See a description :ref:`here<amdgpu_synid_omod>`. |
| |
| .. _amdgpu_synid_dst_sel: |
| |
| dst_sel |
| ~~~~~~~ |
| |
| Selects which bits in the destination are affected. By default, all bits are affected. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| dst_sel:DWORD Use bits 31:0. |
| dst_sel:BYTE_0 Use bits 7:0. |
| dst_sel:BYTE_1 Use bits 15:8. |
| dst_sel:BYTE_2 Use bits 23:16. |
| dst_sel:BYTE_3 Use bits 31:24. |
| dst_sel:WORD_0 Use bits 15:0. |
| dst_sel:WORD_1 Use bits 31:16. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_dst_unused: |
| |
| dst_unused |
| ~~~~~~~~~~ |
| |
| Controls what to do with the bits in the destination which are not selected |
| by :ref:`dst_sel<amdgpu_synid_dst_sel>`. |
| By default, unused bits are preserved. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| dst_unused:UNUSED_PAD Pad with zeros. |
| dst_unused:UNUSED_SEXT Sign-extend upper bits, zero lower bits. |
| dst_unused:UNUSED_PRESERVE Preserve bits. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_src0_sel: |
| |
| src0_sel |
| ~~~~~~~~ |
| |
| Controls which bits in the src0 are used. By default, all bits are used. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| src0_sel:DWORD Use bits 31:0. |
| src0_sel:BYTE_0 Use bits 7:0. |
| src0_sel:BYTE_1 Use bits 15:8. |
| src0_sel:BYTE_2 Use bits 23:16. |
| src0_sel:BYTE_3 Use bits 31:24. |
| src0_sel:WORD_0 Use bits 15:0. |
| src0_sel:WORD_1 Use bits 31:16. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_src1_sel: |
| |
| src1_sel |
| ~~~~~~~~ |
| |
| Controls which bits in the src1 are used. By default, all bits are used. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| src1_sel:DWORD Use bits 31:0. |
| src1_sel:BYTE_0 Use bits 7:0. |
| src1_sel:BYTE_1 Use bits 15:8. |
| src1_sel:BYTE_2 Use bits 23:16. |
| src1_sel:BYTE_3 Use bits 31:24. |
| src1_sel:WORD_0 Use bits 15:0. |
| src1_sel:WORD_1 Use bits 31:16. |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_sdwa_operand_modifiers: |
| |
| SDWA Operand Modifiers |
| ---------------------- |
| |
| Operand modifiers are not used separately. They are applied to source operands. |
| |
| abs |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_abs>`. |
| |
| neg |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_neg>`. |
| |
| .. _amdgpu_synid_sext: |
| |
| sext |
| ~~~~ |
| |
| Sign-extends the value of a (sub-dword) integer operand to fill all 32 bits. |
| |
| Valid for integer operands only. |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| sext(<operand>) Sign-extend operand value. |
| ======================================== ================================================ |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| sext(v4) |
| sext(v255) |
| |
| VOP3 Modifiers |
| -------------- |
| |
| .. _amdgpu_synid_vop3_op_sel: |
| |
| op_sel |
| ~~~~~~ |
| |
| Selects the low [15:0] or high [31:16] operand bits for source and destination operands. |
| By default, low bits are used for all operands. |
| |
| The number of values specified with the op_sel modifier must match the number of instruction |
| operands (both source and destination). The first value controls src0, the second value controls src1 |
| and so on, except that the last value controls destination. |
| The value 0 selects the low bits, while 1 selects the high bits. |
| |
| Note: op_sel modifier affects 16-bit operands only. For 32-bit operands, the value specified |
| by op_sel must be 0. |
| |
| ======================================== ============================================================ |
| Syntax Description |
| ======================================== ============================================================ |
| op_sel:[{0..1},{0..1}] Select operand bits for instructions with 1 source operand. |
| op_sel:[{0..1},{0..1},{0..1}] Select operand bits for instructions with 2 source operands. |
| op_sel:[{0..1},{0..1},{0..1},{0..1}] Select operand bits for instructions with 3 source operands. |
| ======================================== ============================================================ |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| op_sel:[0,0] |
| op_sel:[0,1] |
| |
| .. _amdgpu_synid_dpp_op_sel: |
| |
| dpp_op_sel |
| ~~~~~~~~~~ |
| |
| This is a special version of *op_sel* used for *permlane* opcodes to specify |
| dpp-like mode bits - :ref:`fi<amdgpu_synid_fi16>` and |
| :ref:`bound_ctrl<amdgpu_synid_bound_ctrl>`. |
| |
| ======================================== ================================================================= |
| Syntax Description |
| ======================================== ================================================================= |
| op_sel:[{0..1},{0..1}] The first bit specifies :ref:`fi<amdgpu_synid_fi16>`, the second |
| bit specifies :ref:`bound_ctrl<amdgpu_synid_bound_ctrl>`. |
| ======================================== ================================================================= |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| op_sel:[0,0] |
| |
| .. _amdgpu_synid_clamp: |
| |
| clamp |
| ~~~~~ |
| |
| Clamp meaning depends on instruction. |
| |
| For *v_cmp* instructions, clamp modifier indicates that the compare signals |
| if a floating-point exception occurs. By default, signaling is disabled. |
| |
| For integer operations, clamp modifier indicates that the result must be clamped |
| to the largest and smallest representable value. By default, there is no clamping. |
| |
| For floating-point operations, clamp modifier indicates that the result must be clamped |
| to the range [0.0, 1.0]. By default, there is no clamping. |
| |
| Note: clamp modifier is applied after :ref:`output modifiers<amdgpu_synid_omod>` (if any). |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| clamp Enables clamping (or signaling). |
| ======================================== ================================================ |
| |
| .. _amdgpu_synid_omod: |
| |
| omod |
| ~~~~ |
| |
| Specifies if an output modifier must be applied to the result. |
| It is assumed that the result is a floating-point number. |
| |
| By default, no output modifiers are applied. |
| |
| Note: output modifiers are applied before :ref:`clamping<amdgpu_synid_clamp>` (if any). |
| |
| ======================================== ================================================ |
| Syntax Description |
| ======================================== ================================================ |
| mul:2 Multiply the result by 2. |
| mul:4 Multiply the result by 4. |
| div:2 Multiply the result by 0.5. |
| ======================================== ================================================ |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| mul:2 |
| mul:x // x must be equal to 2 or 4 |
| |
| .. _amdgpu_synid_vop3_operand_modifiers: |
| |
| VOP3 Operand Modifiers |
| ---------------------- |
| |
| Operand modifiers are not used separately. They are applied to source operands. |
| |
| .. _amdgpu_synid_abs: |
| |
| abs |
| ~~~ |
| |
| Computes the absolute value of its operand. Must be applied before :ref:`neg<amdgpu_synid_neg>` |
| (if any). Valid for floating-point operands only. |
| |
| ======================================== ==================================================== |
| Syntax Description |
| ======================================== ==================================================== |
| abs(<operand>) Get the absolute value of a floating-point operand. |
| \|<operand>| The same as above (an SP3 syntax). |
| ======================================== ==================================================== |
| |
| Note: avoid using SP3 syntax with operands specified as expressions because the trailing '|' |
| may be misinterpreted. Such operands should be enclosed into additional parentheses, as shown |
| in examples below. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| abs(v36) |
| \|v36| |
| abs(x|y) // ok |
| \|(x|y)| // additional parentheses are required |
| |
| .. _amdgpu_synid_neg: |
| |
| neg |
| ~~~ |
| |
| Computes the negative value of its operand. Must be applied after :ref:`abs<amdgpu_synid_abs>` |
| (if any). Valid for floating-point operands only. |
| |
| ================== ==================================================== |
| Syntax Description |
| ================== ==================================================== |
| neg(<operand>) Get the negative value of a floating-point operand. |
| An optional :ref:`abs<amdgpu_synid_abs>` modifier |
| may be applied to the operand before negation. |
| -<operand> The same as above (an SP3 syntax). |
| ================== ==================================================== |
| |
| Note: SP3 syntax is supported with limitations because of a potential ambiguity. |
| Currently, it is allowed in the following cases: |
| |
| * Before a register. |
| * Before an :ref:`abs<amdgpu_synid_abs>` modifier. |
| * Before an SP3 :ref:`abs<amdgpu_synid_abs>` modifier. |
| |
| In all other cases, "-" is handled as a part of an expression that follows the sign. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| // Operands with negate modifiers |
| neg(v[0]) |
| neg(1.0) |
| neg(abs(v0)) |
| -v5 |
| -abs(v5) |
| -\|v5| |
| |
| // Expressions where "-" has a different meaning |
| -1 |
| -x+y |
| |
| VOP3P Modifiers |
| --------------- |
| |
| This section describes modifiers of *regular* VOP3P instructions. |
| |
| *v_mad_mix\** and *v_fma_mix\** |
| instructions use these modifiers :ref:`in a special manner<amdgpu_synid_mad_mix>`. |
| |
| .. _amdgpu_synid_op_sel: |
| |
| op_sel |
| ~~~~~~ |
| |
| Selects the low [15:0] or high [31:16] operand bits as input to the operation, |
| which results in the lower-half of the destination. |
| By default, low 16 bits are used for all operands. |
| |
| The number of values specified by the *op_sel* modifier must match the number of source |
| operands. The first value controls src0, the second value controls src1 and so on. |
| |
| The value 0 selects the low bits, while 1 selects the high bits. |
| |
| ================================= ============================================================= |
| Syntax Description |
| ================================= ============================================================= |
| op_sel:[{0..1}] Select operand bits for instructions with 1 source operand. |
| op_sel:[{0..1},{0..1}] Select operand bits for instructions with 2 source operands. |
| op_sel:[{0..1},{0..1},{0..1}] Select operand bits for instructions with 3 source operands. |
| ================================= ============================================================= |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| op_sel:[0,0] |
| op_sel:[0,1,0] |
| |
| .. _amdgpu_synid_op_sel_hi: |
| |
| op_sel_hi |
| ~~~~~~~~~ |
| |
| Selects the low [15:0] or high [31:16] operand bits as input to the operation, |
| which results in the upper-half of the destination. |
| By default, high 16 bits are used for all operands. |
| |
| The number of values specified by the *op_sel_hi* modifier must match the number of source |
| operands. The first value controls src0, the second value controls src1 and so on. |
| |
| The value 0 selects the low bits, while 1 selects the high bits. |
| |
| =================================== ============================================================= |
| Syntax Description |
| =================================== ============================================================= |
| op_sel_hi:[{0..1}] Select operand bits for instructions with 1 source operand. |
| op_sel_hi:[{0..1},{0..1}] Select operand bits for instructions with 2 source operands. |
| op_sel_hi:[{0..1},{0..1},{0..1}] Select operand bits for instructions with 3 source operands. |
| =================================== ============================================================= |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| op_sel_hi:[0,0] |
| op_sel_hi:[0,0,1] |
| |
| .. _amdgpu_synid_neg_lo: |
| |
| neg_lo |
| ~~~~~~ |
| |
| Specifies whether to change the sign of operand values selected by |
| :ref:`op_sel<amdgpu_synid_op_sel>`. These values are then used |
| as input to the operation, which results in the upper-half of the destination. |
| |
| The number of values specified by this modifier must match the number of source |
| operands. The first value controls src0, the second value controls src1 and so on. |
| |
| The value 0 indicates that the corresponding operand value is used unmodified, |
| the value 1 indicates that the negative value of the operand must be used. |
| |
| By default, operand values are used unmodified. |
| |
| This modifier is valid for floating-point operands only. |
| |
| ================================ ================================================================== |
| Syntax Description |
| ================================ ================================================================== |
| neg_lo:[{0..1}] Select affected operands for instructions with 1 source operand. |
| neg_lo:[{0..1},{0..1}] Select affected operands for instructions with 2 source operands. |
| neg_lo:[{0..1},{0..1},{0..1}] Select affected operands for instructions with 3 source operands. |
| ================================ ================================================================== |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| neg_lo:[0] |
| neg_lo:[0,1] |
| |
| .. _amdgpu_synid_neg_hi: |
| |
| neg_hi |
| ~~~~~~ |
| |
| Specifies whether to change sign of operand values selected by |
| :ref:`op_sel_hi<amdgpu_synid_op_sel_hi>`. These values are then used |
| as input to the operation, which results in the upper-half of the destination. |
| |
| The number of values specified by this modifier must match the number of source |
| operands. The first value controls src0, the second value controls src1 and so on. |
| |
| The value 0 indicates that the corresponding operand value is used unmodified, |
| the value 1 indicates that the negative value of the operand must be used. |
| |
| By default, operand values are used unmodified. |
| |
| This modifier is valid for floating-point operands only. |
| |
| =============================== ================================================================== |
| Syntax Description |
| =============================== ================================================================== |
| neg_hi:[{0..1}] Select affected operands for instructions with 1 source operand. |
| neg_hi:[{0..1},{0..1}] Select affected operands for instructions with 2 source operands. |
| neg_hi:[{0..1},{0..1},{0..1}] Select affected operands for instructions with 3 source operands. |
| =============================== ================================================================== |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| neg_hi:[1,0] |
| neg_hi:[0,1,1] |
| |
| clamp |
| ~~~~~ |
| |
| See a description :ref:`here<amdgpu_synid_clamp>`. |
| |
| .. _amdgpu_synid_mad_mix: |
| |
| VOP3P MAD_MIX/FMA_MIX Modifiers |
| ------------------------------- |
| |
| *v_mad_mix\** and *v_fma_mix\** |
| instructions use *op_sel* and *op_sel_hi* modifiers |
| in a manner different from *regular* VOP3P instructions. |
| |
| See a description below. |
| |
| .. _amdgpu_synid_mad_mix_op_sel: |
| |
| m_op_sel |
| ~~~~~~~~ |
| |
| This operand has meaning only for 16-bit source operands, as indicated by |
| :ref:`m_op_sel_hi<amdgpu_synid_mad_mix_op_sel_hi>`. |
| It specifies to select either the low [15:0] or high [31:16] operand bits |
| as input to the operation. |
| |
| The number of values specified by the *op_sel* modifier must match the number of source |
| operands. The first value controls src0, the second value controls src1 and so on. |
| |
| The value 0 indicates the low bits, the value 1 indicates the high 16 bits. |
| |
| By default, low bits are used for all operands. |
| |
| =============================== =================================================== |
| Syntax Description |
| =============================== =================================================== |
| op_sel:[{0..1},{0..1},{0..1}] Select the location of each 16-bit source operand. |
| =============================== =================================================== |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| op_sel:[0,1] |
| |
| .. _amdgpu_synid_mad_mix_op_sel_hi: |
| |
| m_op_sel_hi |
| ~~~~~~~~~~~ |
| |
| Selects the size of source operands: either 32 bits or 16 bits. |
| By default, 32 bits are used for all source operands. |
| |
| The number of values specified by the *op_sel_hi* modifier must match the number of source |
| operands. The first value controls src0, the second value controls src1 and so on. |
| |
| The value 0 indicates 32 bits, the value 1 indicates 16 bits. |
| |
| The location of 16 bits in the operand may be specified by |
| :ref:`m_op_sel<amdgpu_synid_mad_mix_op_sel>`. |
| |
| ======================================== ======================================== |
| Syntax Description |
| ======================================== ======================================== |
| op_sel_hi:[{0..1},{0..1},{0..1}] Select the size of each source operand. |
| ======================================== ======================================== |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| op_sel_hi:[1,1,1] |
| |
| abs |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_abs>`. |
| |
| neg |
| ~~~ |
| |
| See a description :ref:`here<amdgpu_synid_neg>`. |
| |
| clamp |
| ~~~~~ |
| |
| See a description :ref:`here<amdgpu_synid_clamp>`. |
| |
| VOP3P MFMA Modifiers |
| -------------------- |
| |
| .. _amdgpu_synid_cbsz: |
| |
| cbsz |
| ~~~~ |
| |
| Specifies a broadcast mode. |
| |
| =============================== ================================================================== |
| Syntax Description |
| =============================== ================================================================== |
| cbsz:[{0..7}] A broadcast mode. |
| =============================== ================================================================== |
| |
| Note: numeric value may be specified as either |
| an :ref:`integer number<amdgpu_synid_integer_number>` or |
| an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| |
| .. _amdgpu_synid_abid: |
| |
| abid |
| ~~~~ |
| |
| Specifies matrix A group select. |
| |
| =============================== ================================================================== |
| Syntax Description |
| =============================== ================================================================== |
| abid:[{0..15}] Matrix A group select id. |
| =============================== ================================================================== |
| |
| Note: numeric value may be specified as either |
| an :ref:`integer number<amdgpu_synid_integer_number>` or |
| an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| |
| .. _amdgpu_synid_blgp: |
| |
| blgp |
| ~~~~ |
| |
| Specifies matrix B lane group pattern. |
| |
| =============================== ================================================================== |
| Syntax Description |
| =============================== ================================================================== |
| blgp:[{0..7}] Matrix B lane group pattern. |
| =============================== ================================================================== |
| |
| Note: numeric value may be specified as either |
| an :ref:`integer number<amdgpu_synid_integer_number>` or |
| an :ref:`absolute expression<amdgpu_synid_absolute_expression>`. |
| |
| .. _amdgpu_synid_mfma_neg: |
| |
| neg |
| ~~~ |
| |
| Indicates operands that must be negated before the operation. |
| The number of values specified by this modifier must match the number of source |
| operands. The first value controls src0, the second value controls src1 and so on. |
| |
| The value 0 indicates that the corresponding operand value is used unmodified, |
| the value 1 indicates that the operand value must be negated before the operation. |
| |
| By default, operand values are used unmodified. |
| |
| =============================== ================================================================== |
| Syntax Description |
| =============================== ================================================================== |
| neg:[{0..1},{0..1},{0..1}] Select operands which must be negated before the operation. |
| =============================== ================================================================== |
| |
| Note: numeric values may be specified as either |
| :ref:`integer numbers<amdgpu_synid_integer_number>` or |
| :ref:`absolute expressions<amdgpu_synid_absolute_expression>`. |
| |
| Examples: |
| |
| .. parsed-literal:: |
| |
| neg:[0,1,1] |
