//===- LoopUnswitch.cpp - Hoist loop-invariant conditionals in loop -------===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// This pass transforms loops that contain branches on loop-invariant conditions
// to multiple loops.  For example, it turns the left into the right code:
//
//  for (...)                  if (lic)
//    A                          for (...)
//    if (lic)                     A; B; C
//      B                      else
//    C                          for (...)
//                                 A; C
//
// This can increase the size of the code exponentially (doubling it every time
// a loop is unswitched) so we only unswitch if the resultant code will be
// smaller than a threshold.
//
// This pass expects LICM to be run before it to hoist invariant conditions out
// of the loop, to make the unswitching opportunity obvious.
//
//===----------------------------------------------------------------------===//

#include "llvm/ADT/DenseMap.h"
#include "llvm/ADT/STLExtras.h"
#include "llvm/ADT/SmallPtrSet.h"
#include "llvm/ADT/SmallVector.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/Analysis/AssumptionCache.h"
#include "llvm/Analysis/CodeMetrics.h"
#include "llvm/Analysis/InstructionSimplify.h"
#include "llvm/Analysis/LazyBlockFrequencyInfo.h"
#include "llvm/Analysis/LegacyDivergenceAnalysis.h"
#include "llvm/Analysis/LoopInfo.h"
#include "llvm/Analysis/LoopIterator.h"
#include "llvm/Analysis/LoopPass.h"
#include "llvm/Analysis/MemorySSA.h"
#include "llvm/Analysis/MemorySSAUpdater.h"
#include "llvm/Analysis/MustExecute.h"
#include "llvm/Analysis/ScalarEvolution.h"
#include "llvm/Analysis/TargetTransformInfo.h"
#include "llvm/IR/Attributes.h"
#include "llvm/IR/BasicBlock.h"
#include "llvm/IR/Constant.h"
#include "llvm/IR/Constants.h"
#include "llvm/IR/DerivedTypes.h"
#include "llvm/IR/Dominators.h"
#include "llvm/IR/Function.h"
#include "llvm/IR/IRBuilder.h"
#include "llvm/IR/InstrTypes.h"
#include "llvm/IR/Instruction.h"
#include "llvm/IR/Instructions.h"
#include "llvm/IR/IntrinsicInst.h"
#include "llvm/IR/Intrinsics.h"
#include "llvm/IR/Module.h"
#include "llvm/IR/Type.h"
#include "llvm/IR/User.h"
#include "llvm/IR/Value.h"
#include "llvm/IR/ValueHandle.h"
#include "llvm/InitializePasses.h"
#include "llvm/Pass.h"
#include "llvm/Support/Casting.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/Transforms/Scalar.h"
#include "llvm/Transforms/Scalar/LoopPassManager.h"
#include "llvm/Transforms/Utils/BasicBlockUtils.h"
#include "llvm/Transforms/Utils/Cloning.h"
#include "llvm/Transforms/Utils/Local.h"
#include "llvm/Transforms/Utils/LoopUtils.h"
#include "llvm/Transforms/Utils/ValueMapper.h"
#include <algorithm>
#include <cassert>
#include <map>
#include <set>
#include <tuple>
#include <utility>
#include <vector>

using namespace llvm;

#define DEBUG_TYPE "loop-unswitch"

STATISTIC(NumBranches, "Number of branches unswitched");
STATISTIC(NumSwitches, "Number of switches unswitched");
STATISTIC(NumGuards,   "Number of guards unswitched");
STATISTIC(NumSelects , "Number of selects unswitched");
STATISTIC(NumTrivial , "Number of unswitches that are trivial");
STATISTIC(NumSimplify, "Number of simplifications of unswitched code");
STATISTIC(TotalInsts,  "Total number of instructions analyzed");

// The specific value of 100 here was chosen based only on intuition and a
// few specific examples.
static cl::opt<unsigned>
Threshold("loop-unswitch-threshold", cl::desc("Max loop size to unswitch"),
          cl::init(100), cl::Hidden);

static cl::opt<unsigned>
    MSSAThreshold("loop-unswitch-memoryssa-threshold",
                  cl::desc("Max number of memory uses to explore during "
                           "partial unswitching analysis"),
                  cl::init(100), cl::Hidden);

namespace {

  class LUAnalysisCache {
    using UnswitchedValsMap =
        DenseMap<const SwitchInst *, SmallPtrSet<const Value *, 8>>;
    using UnswitchedValsIt = UnswitchedValsMap::iterator;

    struct LoopProperties {
      unsigned CanBeUnswitchedCount;
      unsigned WasUnswitchedCount;
      unsigned SizeEstimation;
      UnswitchedValsMap UnswitchedVals;
    };

    // Here we use std::map instead of DenseMap, since we need to keep valid
    // LoopProperties pointer for current loop for better performance.
    using LoopPropsMap = std::map<const Loop *, LoopProperties>;
    using LoopPropsMapIt = LoopPropsMap::iterator;

    LoopPropsMap LoopsProperties;
    UnswitchedValsMap *CurLoopInstructions = nullptr;
    LoopProperties *CurrentLoopProperties = nullptr;

    // A loop unswitching with an estimated cost above this threshold
    // is not performed. MaxSize is turned into unswitching quota for
    // the current loop, and reduced correspondingly, though note that
    // the quota is returned by releaseMemory() when the loop has been
    // processed, so that MaxSize will return to its previous
    // value. So in most cases MaxSize will equal the Threshold flag
    // when a new loop is processed. An exception to that is that
    // MaxSize will have a smaller value while processing nested loops
    // that were introduced due to loop unswitching of an outer loop.
    //
    // FIXME: The way that MaxSize works is subtle and depends on the
    // pass manager processing loops and calling releaseMemory() in a
    // specific order. It would be good to find a more straightforward
    // way of doing what MaxSize does.
    unsigned MaxSize;

  public:
    LUAnalysisCache() : MaxSize(Threshold) {}

    // Analyze loop. Check its size, calculate is it possible to unswitch
    // it. Returns true if we can unswitch this loop.
    bool countLoop(const Loop *L, const TargetTransformInfo &TTI,
                   AssumptionCache *AC);

    // Clean all data related to given loop.
    void forgetLoop(const Loop *L);

    // Mark case value as unswitched.
    // Since SI instruction can be partly unswitched, in order to avoid
    // extra unswitching in cloned loops keep track all unswitched values.
    void setUnswitched(const SwitchInst *SI, const Value *V);

    // Check was this case value unswitched before or not.
    bool isUnswitched(const SwitchInst *SI, const Value *V);

    // Returns true if another unswitching could be done within the cost
    // threshold.
    bool costAllowsUnswitching();

    // Clone all loop-unswitch related loop properties.
    // Redistribute unswitching quotas.
    // Note, that new loop data is stored inside the VMap.
    void cloneData(const Loop *NewLoop, const Loop *OldLoop,
                   const ValueToValueMapTy &VMap);
  };

  class LoopUnswitch : public LoopPass {
    LoopInfo *LI;  // Loop information
    LPPassManager *LPM;
    AssumptionCache *AC;

    // Used to check if second loop needs processing after
    // rewriteLoopBodyWithConditionConstant rewrites first loop.
    std::vector<Loop*> LoopProcessWorklist;

    LUAnalysisCache BranchesInfo;

    bool OptimizeForSize;
    bool RedoLoop = false;

    Loop *CurrentLoop = nullptr;
    DominatorTree *DT = nullptr;
    MemorySSA *MSSA = nullptr;
    AAResults *AA = nullptr;
    std::unique_ptr<MemorySSAUpdater> MSSAU;
    BasicBlock *LoopHeader = nullptr;
    BasicBlock *LoopPreheader = nullptr;

    bool SanitizeMemory;
    SimpleLoopSafetyInfo SafetyInfo;

    // LoopBlocks contains all of the basic blocks of the loop, including the
    // preheader of the loop, the body of the loop, and the exit blocks of the
    // loop, in that order.
    std::vector<BasicBlock*> LoopBlocks;
    // NewBlocks contained cloned copy of basic blocks from LoopBlocks.
    std::vector<BasicBlock*> NewBlocks;

    bool HasBranchDivergence;

  public:
    static char ID; // Pass ID, replacement for typeid

    explicit LoopUnswitch(bool Os = false, bool HasBranchDivergence = false)
        : LoopPass(ID), OptimizeForSize(Os),
          HasBranchDivergence(HasBranchDivergence) {
      initializeLoopUnswitchPass(*PassRegistry::getPassRegistry());
    }

    bool runOnLoop(Loop *L, LPPassManager &LPM) override;
    bool processCurrentLoop();
    bool isUnreachableDueToPreviousUnswitching(BasicBlock *);

    /// This transformation requires natural loop information & requires that
    /// loop preheaders be inserted into the CFG.
    ///
    void getAnalysisUsage(AnalysisUsage &AU) const override {
      // Lazy BFI and BPI are marked as preserved here so Loop Unswitching
      // can remain part of the same loop pass as LICM
      AU.addPreserved<LazyBlockFrequencyInfoPass>();
      AU.addPreserved<LazyBranchProbabilityInfoPass>();
      AU.addRequired<AssumptionCacheTracker>();
      AU.addRequired<TargetTransformInfoWrapperPass>();
      if (EnableMSSALoopDependency) {
        AU.addRequired<MemorySSAWrapperPass>();
        AU.addPreserved<MemorySSAWrapperPass>();
      }
      if (HasBranchDivergence)
        AU.addRequired<LegacyDivergenceAnalysis>();
      getLoopAnalysisUsage(AU);
    }

  private:
    void releaseMemory() override { BranchesInfo.forgetLoop(CurrentLoop); }

    void initLoopData() {
      LoopHeader = CurrentLoop->getHeader();
      LoopPreheader = CurrentLoop->getLoopPreheader();
    }

    /// Split all of the edges from inside the loop to their exit blocks.
    /// Update the appropriate Phi nodes as we do so.
    void splitExitEdges(Loop *L,
                        const SmallVectorImpl<BasicBlock *> &ExitBlocks);

    bool tryTrivialLoopUnswitch(bool &Changed);

    bool unswitchIfProfitable(Value *LoopCond, Constant *Val,
                              Instruction *TI = nullptr,
                              ArrayRef<Instruction *> ToDuplicate = {});
    void unswitchTrivialCondition(Loop *L, Value *Cond, Constant *Val,
                                  BasicBlock *ExitBlock, Instruction *TI);
    void unswitchNontrivialCondition(Value *LIC, Constant *OnVal, Loop *L,
                                     Instruction *TI,
                                     ArrayRef<Instruction *> ToDuplicate = {});

    void rewriteLoopBodyWithConditionConstant(Loop *L, Value *LIC,
                                              Constant *Val, bool IsEqual);

    void
    emitPreheaderBranchOnCondition(Value *LIC, Constant *Val,
                                   BasicBlock *TrueDest, BasicBlock *FalseDest,
                                   BranchInst *OldBranch, Instruction *TI,
                                   ArrayRef<Instruction *> ToDuplicate = {});

    void simplifyCode(std::vector<Instruction *> &Worklist, Loop *L);

    /// Given that the Invariant is not equal to Val. Simplify instructions
    /// in the loop.
    Value *simplifyInstructionWithNotEqual(Instruction *Inst, Value *Invariant,
                                           Constant *Val);
  };

} // end anonymous namespace

// Analyze loop. Check its size, calculate is it possible to unswitch
// it. Returns true if we can unswitch this loop.
bool LUAnalysisCache::countLoop(const Loop *L, const TargetTransformInfo &TTI,
                                AssumptionCache *AC) {
  LoopPropsMapIt PropsIt;
  bool Inserted;
  std::tie(PropsIt, Inserted) =
      LoopsProperties.insert(std::make_pair(L, LoopProperties()));

  LoopProperties &Props = PropsIt->second;

  if (Inserted) {
    // New loop.

    // Limit the number of instructions to avoid causing significant code
    // expansion, and the number of basic blocks, to avoid loops with
    // large numbers of branches which cause loop unswitching to go crazy.
    // This is a very ad-hoc heuristic.

    SmallPtrSet<const Value *, 32> EphValues;
    CodeMetrics::collectEphemeralValues(L, AC, EphValues);

    // FIXME: This is overly conservative because it does not take into
    // consideration code simplification opportunities and code that can
    // be shared by the resultant unswitched loops.
    CodeMetrics Metrics;
    for (BasicBlock *BB : L->blocks())
      Metrics.analyzeBasicBlock(BB, TTI, EphValues);

    Props.SizeEstimation = Metrics.NumInsts;
    Props.CanBeUnswitchedCount = MaxSize / (Props.SizeEstimation);
    Props.WasUnswitchedCount = 0;
    MaxSize -= Props.SizeEstimation * Props.CanBeUnswitchedCount;

    if (Metrics.notDuplicatable) {
      LLVM_DEBUG(dbgs() << "NOT unswitching loop %" << L->getHeader()->getName()
                        << ", contents cannot be "
                        << "duplicated!\n");
      return false;
    }
  }

  // Be careful. This links are good only before new loop addition.
  CurrentLoopProperties = &Props;
  CurLoopInstructions = &Props.UnswitchedVals;

  return true;
}

// Clean all data related to given loop.
void LUAnalysisCache::forgetLoop(const Loop *L) {
  LoopPropsMapIt LIt = LoopsProperties.find(L);

  if (LIt != LoopsProperties.end()) {
    LoopProperties &Props = LIt->second;
    MaxSize += (Props.CanBeUnswitchedCount + Props.WasUnswitchedCount) *
               Props.SizeEstimation;
    LoopsProperties.erase(LIt);
  }

  CurrentLoopProperties = nullptr;
  CurLoopInstructions = nullptr;
}

// Mark case value as unswitched.
// Since SI instruction can be partly unswitched, in order to avoid
// extra unswitching in cloned loops keep track all unswitched values.
void LUAnalysisCache::setUnswitched(const SwitchInst *SI, const Value *V) {
  (*CurLoopInstructions)[SI].insert(V);
}

// Check was this case value unswitched before or not.
bool LUAnalysisCache::isUnswitched(const SwitchInst *SI, const Value *V) {
  return (*CurLoopInstructions)[SI].count(V);
}

bool LUAnalysisCache::costAllowsUnswitching() {
  return CurrentLoopProperties->CanBeUnswitchedCount > 0;
}

// Clone all loop-unswitch related loop properties.
// Redistribute unswitching quotas.
// Note, that new loop data is stored inside the VMap.
void LUAnalysisCache::cloneData(const Loop *NewLoop, const Loop *OldLoop,
                                const ValueToValueMapTy &VMap) {
  LoopProperties &NewLoopProps = LoopsProperties[NewLoop];
  LoopProperties &OldLoopProps = *CurrentLoopProperties;
  UnswitchedValsMap &Insts = OldLoopProps.UnswitchedVals;

  // Reallocate "can-be-unswitched quota"

  --OldLoopProps.CanBeUnswitchedCount;
  ++OldLoopProps.WasUnswitchedCount;
  NewLoopProps.WasUnswitchedCount = 0;
  unsigned Quota = OldLoopProps.CanBeUnswitchedCount;
  NewLoopProps.CanBeUnswitchedCount = Quota / 2;
  OldLoopProps.CanBeUnswitchedCount = Quota - Quota / 2;

  NewLoopProps.SizeEstimation = OldLoopProps.SizeEstimation;

  // Clone unswitched values info:
  // for new loop switches we clone info about values that was
  // already unswitched and has redundant successors.
  for (const auto &I : Insts) {
    const SwitchInst *OldInst = I.first;
    Value *NewI = VMap.lookup(OldInst);
    const SwitchInst *NewInst = cast_or_null<SwitchInst>(NewI);
    assert(NewInst && "All instructions that are in SrcBB must be in VMap.");

    NewLoopProps.UnswitchedVals[NewInst] = OldLoopProps.UnswitchedVals[OldInst];
  }
}

char LoopUnswitch::ID = 0;

INITIALIZE_PASS_BEGIN(LoopUnswitch, "loop-unswitch", "Unswitch loops",
                      false, false)
INITIALIZE_PASS_DEPENDENCY(AssumptionCacheTracker)
INITIALIZE_PASS_DEPENDENCY(LoopPass)
INITIALIZE_PASS_DEPENDENCY(TargetTransformInfoWrapperPass)
INITIALIZE_PASS_DEPENDENCY(LegacyDivergenceAnalysis)
INITIALIZE_PASS_DEPENDENCY(MemorySSAWrapperPass)
INITIALIZE_PASS_END(LoopUnswitch, "loop-unswitch", "Unswitch loops",
                      false, false)

Pass *llvm::createLoopUnswitchPass(bool Os, bool HasBranchDivergence) {
  return new LoopUnswitch(Os, HasBranchDivergence);
}

/// Operator chain lattice.
enum OperatorChain {
  OC_OpChainNone,    ///< There is no operator.
  OC_OpChainOr,      ///< There are only ORs.
  OC_OpChainAnd,     ///< There are only ANDs.
  OC_OpChainMixed    ///< There are ANDs and ORs.
};

/// Cond is a condition that occurs in L. If it is invariant in the loop, or has
/// an invariant piece, return the invariant. Otherwise, return null.
//
/// NOTE: findLIVLoopCondition will not return a partial LIV by walking up a
/// mixed operator chain, as we can not reliably find a value which will
/// simplify the operator chain. If the chain is AND-only or OR-only, we can use
/// 0 or ~0 to simplify the chain.
///
/// NOTE: In case a partial LIV and a mixed operator chain, we may be able to
/// simplify the condition itself to a loop variant condition, but at the
/// cost of creating an entirely new loop.
static Value *findLIVLoopCondition(Value *Cond, Loop *L, bool &Changed,
                                   OperatorChain &ParentChain,
                                   DenseMap<Value *, Value *> &Cache,
                                   MemorySSAUpdater *MSSAU) {
  auto CacheIt = Cache.find(Cond);
  if (CacheIt != Cache.end())
    return CacheIt->second;

  // We started analyze new instruction, increment scanned instructions counter.
  ++TotalInsts;

  // We can never unswitch on vector conditions.
  if (Cond->getType()->isVectorTy())
    return nullptr;

  // Constants should be folded, not unswitched on!
  if (isa<Constant>(Cond)) return nullptr;

  // TODO: Handle: br (VARIANT|INVARIANT).

  // Hoist simple values out.
  if (L->makeLoopInvariant(Cond, Changed, nullptr, MSSAU)) {
    Cache[Cond] = Cond;
    return Cond;
  }

  // Walk up the operator chain to find partial invariant conditions.
  if (BinaryOperator *BO = dyn_cast<BinaryOperator>(Cond))
    if (BO->getOpcode() == Instruction::And ||
        BO->getOpcode() == Instruction::Or) {
      // Given the previous operator, compute the current operator chain status.
      OperatorChain NewChain;
      switch (ParentChain) {
      case OC_OpChainNone:
        NewChain = BO->getOpcode() == Instruction::And ? OC_OpChainAnd :
                                      OC_OpChainOr;
        break;
      case OC_OpChainOr:
        NewChain = BO->getOpcode() == Instruction::Or ? OC_OpChainOr :
                                      OC_OpChainMixed;
        break;
      case OC_OpChainAnd:
        NewChain = BO->getOpcode() == Instruction::And ? OC_OpChainAnd :
                                      OC_OpChainMixed;
        break;
      case OC_OpChainMixed:
        NewChain = OC_OpChainMixed;
        break;
      }

      // If we reach a Mixed state, we do not want to keep walking up as we can not
      // reliably find a value that will simplify the chain. With this check, we
      // will return null on the first sight of mixed chain and the caller will
      // either backtrack to find partial LIV in other operand or return null.
      if (NewChain != OC_OpChainMixed) {
        // Update the current operator chain type before we search up the chain.
        ParentChain = NewChain;
        // If either the left or right side is invariant, we can unswitch on this,
        // which will cause the branch to go away in one loop and the condition to
        // simplify in the other one.
        if (Value *LHS = findLIVLoopCondition(BO->getOperand(0), L, Changed,
                                              ParentChain, Cache, MSSAU)) {
          Cache[Cond] = LHS;
          return LHS;
        }
        // We did not manage to find a partial LIV in operand(0). Backtrack and try
        // operand(1).
        ParentChain = NewChain;
        if (Value *RHS = findLIVLoopCondition(BO->getOperand(1), L, Changed,
                                              ParentChain, Cache, MSSAU)) {
          Cache[Cond] = RHS;
          return RHS;
        }
      }
    }

  Cache[Cond] = nullptr;
  return nullptr;
}

/// Cond is a condition that occurs in L. If it is invariant in the loop, or has
/// an invariant piece, return the invariant along with the operator chain type.
/// Otherwise, return null.
static std::pair<Value *, OperatorChain>
findLIVLoopCondition(Value *Cond, Loop *L, bool &Changed,
                     MemorySSAUpdater *MSSAU) {
  DenseMap<Value *, Value *> Cache;
  OperatorChain OpChain = OC_OpChainNone;
  Value *FCond = findLIVLoopCondition(Cond, L, Changed, OpChain, Cache, MSSAU);

  // In case we do find a LIV, it can not be obtained by walking up a mixed
  // operator chain.
  assert((!FCond || OpChain != OC_OpChainMixed) &&
        "Do not expect a partial LIV with mixed operator chain");
  return {FCond, OpChain};
}

bool LoopUnswitch::runOnLoop(Loop *L, LPPassManager &LPMRef) {
  if (skipLoop(L))
    return false;

  AC = &getAnalysis<AssumptionCacheTracker>().getAssumptionCache(
      *L->getHeader()->getParent());
  LI = &getAnalysis<LoopInfoWrapperPass>().getLoopInfo();
  LPM = &LPMRef;
  DT = &getAnalysis<DominatorTreeWrapperPass>().getDomTree();
  AA = &getAnalysis<AAResultsWrapperPass>().getAAResults();
  if (EnableMSSALoopDependency) {
    MSSA = &getAnalysis<MemorySSAWrapperPass>().getMSSA();
    MSSAU = std::make_unique<MemorySSAUpdater>(MSSA);
    assert(DT && "Cannot update MemorySSA without a valid DomTree.");
  }
  CurrentLoop = L;
  Function *F = CurrentLoop->getHeader()->getParent();

  SanitizeMemory = F->hasFnAttribute(Attribute::SanitizeMemory);
  if (SanitizeMemory)
    SafetyInfo.computeLoopSafetyInfo(L);

  if (MSSA && VerifyMemorySSA)
    MSSA->verifyMemorySSA();

  bool Changed = false;
  do {
    assert(CurrentLoop->isLCSSAForm(*DT));
    if (MSSA && VerifyMemorySSA)
      MSSA->verifyMemorySSA();
    RedoLoop = false;
    Changed |= processCurrentLoop();
  } while (RedoLoop);

  if (MSSA && VerifyMemorySSA)
    MSSA->verifyMemorySSA();

  return Changed;
}

// Return true if the BasicBlock BB is unreachable from the loop header.
// Return false, otherwise.
bool LoopUnswitch::isUnreachableDueToPreviousUnswitching(BasicBlock *BB) {
  auto *Node = DT->getNode(BB)->getIDom();
  BasicBlock *DomBB = Node->getBlock();
  while (CurrentLoop->contains(DomBB)) {
    BranchInst *BInst = dyn_cast<BranchInst>(DomBB->getTerminator());

    Node = DT->getNode(DomBB)->getIDom();
    DomBB = Node->getBlock();

    if (!BInst || !BInst->isConditional())
      continue;

    Value *Cond = BInst->getCondition();
    if (!isa<ConstantInt>(Cond))
      continue;

    BasicBlock *UnreachableSucc =
        Cond == ConstantInt::getTrue(Cond->getContext())
            ? BInst->getSuccessor(1)
            : BInst->getSuccessor(0);

    if (DT->dominates(UnreachableSucc, BB))
      return true;
  }
  return false;
}

/// FIXME: Remove this workaround when freeze related patches are done.
/// LoopUnswitch and Equality propagation in GVN have discrepancy about
/// whether branch on undef/poison has undefine behavior. Here it is to
/// rule out some common cases that we found such discrepancy already
/// causing problems. Detail could be found in PR31652. Note if the
/// func returns true, it is unsafe. But if it is false, it doesn't mean
/// it is necessarily safe.
static bool equalityPropUnSafe(Value &LoopCond) {
  ICmpInst *CI = dyn_cast<ICmpInst>(&LoopCond);
  if (!CI || !CI->isEquality())
    return false;

  Value *LHS = CI->getOperand(0);
  Value *RHS = CI->getOperand(1);
  if (isa<UndefValue>(LHS) || isa<UndefValue>(RHS))
    return true;

  auto HasUndefInPHI = [](PHINode &PN) {
    for (Value *Opd : PN.incoming_values()) {
      if (isa<UndefValue>(Opd))
        return true;
    }
    return false;
  };
  PHINode *LPHI = dyn_cast<PHINode>(LHS);
  PHINode *RPHI = dyn_cast<PHINode>(RHS);
  if ((LPHI && HasUndefInPHI(*LPHI)) || (RPHI && HasUndefInPHI(*RPHI)))
    return true;

  auto HasUndefInSelect = [](SelectInst &SI) {
    if (isa<UndefValue>(SI.getTrueValue()) ||
        isa<UndefValue>(SI.getFalseValue()))
      return true;
    return false;
  };
  SelectInst *LSI = dyn_cast<SelectInst>(LHS);
  SelectInst *RSI = dyn_cast<SelectInst>(RHS);
  if ((LSI && HasUndefInSelect(*LSI)) || (RSI && HasUndefInSelect(*RSI)))
    return true;
  return false;
}

namespace {
/// Struct to hold information about a partially invariant condition.
struct IVConditionInfo {
  /// Instructions that need to be duplicated and checked for the unswitching
  /// condition.
  SmallVector<Instruction *, 4> InstToDuplicate;

  /// Constant to indicate for which value the condition is invariant.
  Constant *KnownValue = nullptr;

  /// True if the partially invariant path is no-op (=does not have any
  /// side-effects and no loop value is used outside the loop).
  bool PathIsNoop = true;

  /// If the partially invariant path reaches a single exit block, ExitForPath
  /// is set to that block. Otherwise it is nullptr.
  BasicBlock *ExitForPath = nullptr;
};
} // namespace

/// Check if the loop header has a conditional branch that is not
/// loop-invariant, because it involves load instructions. If all paths from
/// either the true or false successor to the header or loop exists do not
/// modify the memory feeding the condition, perform 'partial unswitching'. That
/// is, duplicate the instructions feeding the condition in the pre-header. Then
/// unswitch on the duplicated condition. The condition is now known in the
/// unswitched version for the 'invariant' path through the original loop.
///
/// If the branch condition of the header is partially invariant, return a pair
/// containing the instructions to duplicate and a boolean Constant to update
/// the condition in the loops created for the true or false successors.
static Optional<IVConditionInfo> hasPartialIVCondition(Loop *L, MemorySSA &MSSA,
                                                       AAResults *AA) {

  auto *TI = dyn_cast<BranchInst>(L->getHeader()->getTerminator());
  if (!TI || !TI->isConditional())
    return {};

  auto *CondI = dyn_cast<CmpInst>(TI->getCondition());
  // The case with the condition outside the loop should already be handled
  // earlier.
  if (!CondI || !L->contains(CondI))
    return {};

  SmallVector<Instruction *, 4> InstToDuplicate;
  InstToDuplicate.push_back(CondI);

  SmallVector<Value *, 4> WorkList;
  WorkList.append(CondI->op_begin(), CondI->op_end());

  SmallVector<MemoryAccess *, 4> AccessesToCheck;
  SmallVector<MemoryLocation, 4> AccessedLocs;
  while (!WorkList.empty()) {
    Instruction *I = dyn_cast<Instruction>(WorkList.pop_back_val());
    if (!I || !L->contains(I))
      continue;

    // TODO: support additional instructions.
    if (!isa<LoadInst>(I) && !isa<GetElementPtrInst>(I))
      return {};

    // Do not duplicate volatile and atomic loads.
    if (auto *LI = dyn_cast<LoadInst>(I))
      if (LI->isVolatile() || LI->isAtomic())
        return {};

    InstToDuplicate.push_back(I);
    if (MemoryAccess *MA = MSSA.getMemoryAccess(I)) {
      if (auto *MemUse = dyn_cast_or_null<MemoryUse>(MA)) {
        // Queue the defining access to check for alias checks.
        AccessesToCheck.push_back(MemUse->getDefiningAccess());
        AccessedLocs.push_back(MemoryLocation::get(I));
      } else {
        // MemoryDefs may clobber the location or may be atomic memory
        // operations. Bail out.
        return {};
      }
    }
    WorkList.append(I->op_begin(), I->op_end());
  }

  if (InstToDuplicate.size() <= 1)
    return {};

  SmallVector<BasicBlock *, 4> ExitingBlocks;
  L->getExitingBlocks(ExitingBlocks);
  auto HasNoClobbersOnPath =
      [L, AA, &AccessedLocs, &ExitingBlocks,
       &InstToDuplicate](BasicBlock *Succ, BasicBlock *Header,
                         SmallVector<MemoryAccess *, 4> AccessesToCheck)
      -> Optional<IVConditionInfo> {
    IVConditionInfo Info;
    // First, collect all blocks in the loop that are on a patch from Succ
    // to the header.
    SmallVector<BasicBlock *, 4> WorkList;
    WorkList.push_back(Succ);
    WorkList.push_back(Header);
    SmallPtrSet<BasicBlock *, 4> Seen;
    Seen.insert(Header);
    Info.PathIsNoop &=
        all_of(*Header, [](Instruction &I) { return !I.mayHaveSideEffects(); });

    while (!WorkList.empty()) {
      BasicBlock *Current = WorkList.pop_back_val();
      if (!L->contains(Current))
        continue;
      const auto &SeenIns = Seen.insert(Current);
      if (!SeenIns.second)
        continue;

      Info.PathIsNoop &= all_of(
          *Current, [](Instruction &I) { return !I.mayHaveSideEffects(); });
      WorkList.append(succ_begin(Current), succ_end(Current));
    }

    // Require at least 2 blocks on a path through the loop. This skips
    // paths that directly exit the loop.
    if (Seen.size() < 2)
      return {};

    // Next, check if there are any MemoryDefs that are on the path through
    // the loop (in the Seen set) and they may-alias any of the locations in
    // AccessedLocs. If that is the case, they may modify the condition and
    // partial unswitching is not possible.
    SmallPtrSet<MemoryAccess *, 4> SeenAccesses;
    while (!AccessesToCheck.empty()) {
      MemoryAccess *Current = AccessesToCheck.pop_back_val();
      auto SeenI = SeenAccesses.insert(Current);
      if (!SeenI.second || !Seen.contains(Current->getBlock()))
        continue;

      // Bail out if exceeded the threshold.
      if (SeenAccesses.size() >= MSSAThreshold)
        return {};

      // MemoryUse are read-only accesses.
      if (isa<MemoryUse>(Current))
        continue;

      // For a MemoryDef, check if is aliases any of the location feeding
      // the original condition.
      if (auto *CurrentDef = dyn_cast<MemoryDef>(Current)) {
        if (any_of(AccessedLocs, [AA, CurrentDef](MemoryLocation &Loc) {
              return isModSet(
                  AA->getModRefInfo(CurrentDef->getMemoryInst(), Loc));
            }))
          return {};
      }

      for (Use &U : Current->uses())
        AccessesToCheck.push_back(cast<MemoryAccess>(U.getUser()));
    }

    // We could also allow loops with known trip counts without mustprogress,
    // but ScalarEvolution may not be available.
    Info.PathIsNoop &=
        L->getHeader()->getParent()->mustProgress() || hasMustProgress(L);

    // If the path is considered a no-op so far, check if it reaches a
    // single exit block without any phis. This ensures no values from the
    // loop are used outside of the loop.
    if (Info.PathIsNoop) {
      for (auto *Exiting : ExitingBlocks) {
        if (!Seen.contains(Exiting))
          continue;
        for (auto *Succ : successors(Exiting)) {
          if (L->contains(Succ))
            continue;

          Info.PathIsNoop &= llvm::empty(Succ->phis()) &&
                             (!Info.ExitForPath || Info.ExitForPath == Succ);
          if (!Info.PathIsNoop)
            break;
          assert((!Info.ExitForPath || Info.ExitForPath == Succ) &&
                 "cannot have multiple exit blocks");
          Info.ExitForPath = Succ;
        }
      }
    }
    if (!Info.ExitForPath)
      Info.PathIsNoop = false;

    Info.InstToDuplicate = InstToDuplicate;
    return Info;
  };

  // If we branch to the same successor, partial unswitching will not be
  // beneficial.
  if (TI->getSuccessor(0) == TI->getSuccessor(1))
    return {};

  if (auto Info = HasNoClobbersOnPath(TI->getSuccessor(0), L->getHeader(),
                                      AccessesToCheck)) {
    Info->KnownValue = ConstantInt::getTrue(TI->getContext());
    return Info;
  }
  if (auto Info = HasNoClobbersOnPath(TI->getSuccessor(1), L->getHeader(),
                                      AccessesToCheck)) {
    Info->KnownValue = ConstantInt::getFalse(TI->getContext());
    return Info;
  }

  return {};
}

/// Do actual work and unswitch loop if possible and profitable.
bool LoopUnswitch::processCurrentLoop() {
  bool Changed = false;

  initLoopData();

  // If LoopSimplify was unable to form a preheader, don't do any unswitching.
  if (!LoopPreheader)
    return false;

  // Loops with indirectbr cannot be cloned.
  if (!CurrentLoop->isSafeToClone())
    return false;

  // Without dedicated exits, splitting the exit edge may fail.
  if (!CurrentLoop->hasDedicatedExits())
    return false;

  LLVMContext &Context = LoopHeader->getContext();

  // Analyze loop cost, and stop unswitching if loop content can not be duplicated.
  if (!BranchesInfo.countLoop(
          CurrentLoop,
          getAnalysis<TargetTransformInfoWrapperPass>().getTTI(
              *CurrentLoop->getHeader()->getParent()),
          AC))
    return false;

  // Try trivial unswitch first before loop over other basic blocks in the loop.
  if (tryTrivialLoopUnswitch(Changed)) {
    return true;
  }

  // Do not do non-trivial unswitch while optimizing for size.
  // FIXME: Use Function::hasOptSize().
  if (OptimizeForSize ||
      LoopHeader->getParent()->hasFnAttribute(Attribute::OptimizeForSize))
    return Changed;

  // Run through the instructions in the loop, keeping track of three things:
  //
  //  - That we do not unswitch loops containing convergent operations, as we
  //    might be making them control dependent on the unswitch value when they
  //    were not before.
  //    FIXME: This could be refined to only bail if the convergent operation is
  //    not already control-dependent on the unswitch value.
  //
  //  - That basic blocks in the loop contain invokes whose predecessor edges we
  //    cannot split.
  //
  //  - The set of guard intrinsics encountered (these are non terminator
  //    instructions that are also profitable to be unswitched).

  SmallVector<IntrinsicInst *, 4> Guards;

  for (const auto BB : CurrentLoop->blocks()) {
    for (auto &I : *BB) {
      auto *CB = dyn_cast<CallBase>(&I);
      if (!CB)
        continue;
      if (CB->isConvergent())
        return Changed;
      if (auto *II = dyn_cast<InvokeInst>(&I))
        if (!II->getUnwindDest()->canSplitPredecessors())
          return Changed;
      if (auto *II = dyn_cast<IntrinsicInst>(&I))
        if (II->getIntrinsicID() == Intrinsic::experimental_guard)
          Guards.push_back(II);
    }
  }

  for (IntrinsicInst *Guard : Guards) {
    Value *LoopCond = findLIVLoopCondition(Guard->getOperand(0), CurrentLoop,
                                           Changed, MSSAU.get())
                          .first;
    if (LoopCond &&
        unswitchIfProfitable(LoopCond, ConstantInt::getTrue(Context))) {
      // NB! Unswitching (if successful) could have erased some of the
      // instructions in Guards leaving dangling pointers there.  This is fine
      // because we're returning now, and won't look at Guards again.
      ++NumGuards;
      return true;
    }
  }

  // Loop over all of the basic blocks in the loop.  If we find an interior
  // block that is branching on a loop-invariant condition, we can unswitch this
  // loop.
  for (Loop::block_iterator I = CurrentLoop->block_begin(),
                            E = CurrentLoop->block_end();
       I != E; ++I) {
    Instruction *TI = (*I)->getTerminator();

    // Unswitching on a potentially uninitialized predicate is not
    // MSan-friendly. Limit this to the cases when the original predicate is
    // guaranteed to execute, to avoid creating a use-of-uninitialized-value
    // in the code that did not have one.
    // This is a workaround for the discrepancy between LLVM IR and MSan
    // semantics. See PR28054 for more details.
    if (SanitizeMemory &&
        !SafetyInfo.isGuaranteedToExecute(*TI, DT, CurrentLoop))
      continue;

    if (BranchInst *BI = dyn_cast<BranchInst>(TI)) {
      // Some branches may be rendered unreachable because of previous
      // unswitching.
      // Unswitch only those branches that are reachable.
      if (isUnreachableDueToPreviousUnswitching(*I))
        continue;

      // If this isn't branching on an invariant condition, we can't unswitch
      // it.
      if (BI->isConditional()) {
        // See if this, or some part of it, is loop invariant.  If so, we can
        // unswitch on it if we desire.
        Value *LoopCond = findLIVLoopCondition(BI->getCondition(), CurrentLoop,
                                               Changed, MSSAU.get())
                              .first;
        if (LoopCond && !equalityPropUnSafe(*LoopCond) &&
            unswitchIfProfitable(LoopCond, ConstantInt::getTrue(Context), TI)) {
          ++NumBranches;
          return true;
        }
      }
    } else if (SwitchInst *SI = dyn_cast<SwitchInst>(TI)) {
      Value *SC = SI->getCondition();
      Value *LoopCond;
      OperatorChain OpChain;
      std::tie(LoopCond, OpChain) =
          findLIVLoopCondition(SC, CurrentLoop, Changed, MSSAU.get());

      unsigned NumCases = SI->getNumCases();
      if (LoopCond && NumCases) {
        // Find a value to unswitch on:
        // FIXME: this should chose the most expensive case!
        // FIXME: scan for a case with a non-critical edge?
        Constant *UnswitchVal = nullptr;
        // Find a case value such that at least one case value is unswitched
        // out.
        if (OpChain == OC_OpChainAnd) {
          // If the chain only has ANDs and the switch has a case value of 0.
          // Dropping in a 0 to the chain will unswitch out the 0-casevalue.
          auto *AllZero = cast<ConstantInt>(Constant::getNullValue(SC->getType()));
          if (BranchesInfo.isUnswitched(SI, AllZero))
            continue;
          // We are unswitching 0 out.
          UnswitchVal = AllZero;
        } else if (OpChain == OC_OpChainOr) {
          // If the chain only has ORs and the switch has a case value of ~0.
          // Dropping in a ~0 to the chain will unswitch out the ~0-casevalue.
          auto *AllOne = cast<ConstantInt>(Constant::getAllOnesValue(SC->getType()));
          if (BranchesInfo.isUnswitched(SI, AllOne))
            continue;
          // We are unswitching ~0 out.
          UnswitchVal = AllOne;
        } else {
          assert(OpChain == OC_OpChainNone &&
                 "Expect to unswitch on trivial chain");
          // Do not process same value again and again.
          // At this point we have some cases already unswitched and
          // some not yet unswitched. Let's find the first not yet unswitched one.
          for (auto Case : SI->cases()) {
            Constant *UnswitchValCandidate = Case.getCaseValue();
            if (!BranchesInfo.isUnswitched(SI, UnswitchValCandidate)) {
              UnswitchVal = UnswitchValCandidate;
              break;
            }
          }
        }

        if (!UnswitchVal)
          continue;

        if (unswitchIfProfitable(LoopCond, UnswitchVal)) {
          ++NumSwitches;
          // In case of a full LIV, UnswitchVal is the value we unswitched out.
          // In case of a partial LIV, we only unswitch when its an AND-chain
          // or OR-chain. In both cases switch input value simplifies to
          // UnswitchVal.
          BranchesInfo.setUnswitched(SI, UnswitchVal);
          return true;
        }
      }
    }

    // Scan the instructions to check for unswitchable values.
    for (BasicBlock::iterator BBI = (*I)->begin(), E = (*I)->end();
         BBI != E; ++BBI)
      if (SelectInst *SI = dyn_cast<SelectInst>(BBI)) {
        Value *LoopCond = findLIVLoopCondition(SI->getCondition(), CurrentLoop,
                                               Changed, MSSAU.get())
                              .first;
        if (LoopCond &&
            unswitchIfProfitable(LoopCond, ConstantInt::getTrue(Context))) {
          ++NumSelects;
          return true;
        }
      }
  }

  // Check if there is a header condition that is invariant along the patch from
  // either the true or false successors to the header. This allows unswitching
  // conditions depending on memory accesses, if there's a path not clobbering
  // the memory locations. Check if this transform has been disabled using
  // metadata, to avoid unswitching the same loop multiple times.
  if (MSSA &&
      !findOptionMDForLoop(CurrentLoop, "llvm.loop.unswitch.partial.disable")) {
    if (auto Info = hasPartialIVCondition(CurrentLoop, *MSSA, AA)) {
      assert(!Info->InstToDuplicate.empty() &&
             "need at least a partially invariant condition");
      LLVM_DEBUG(dbgs() << "loop-unswitch: Found partially invariant condition "
                        << *Info->InstToDuplicate[0] << "\n");

      Instruction *TI = CurrentLoop->getHeader()->getTerminator();
      Value *LoopCond = Info->InstToDuplicate[0];

      // If the partially unswitched path is a no-op and has a single exit
      // block, we do not need to do full unswitching. Instead, we can directly
      // branch to the exit.
      // TODO: Instead of duplicating the checks, we could also just directly
      // branch to the exit from the conditional branch in the loop.
      if (Info->PathIsNoop) {
        if (HasBranchDivergence &&
            getAnalysis<LegacyDivergenceAnalysis>().isDivergent(LoopCond)) {
          LLVM_DEBUG(dbgs() << "NOT unswitching loop %"
                            << CurrentLoop->getHeader()->getName()
                            << " at non-trivial condition '"
                            << *Info->KnownValue << "' == " << *LoopCond << "\n"
                            << ". Condition is divergent.\n");
          return false;
        }

        ++NumBranches;

        BasicBlock *TrueDest = LoopHeader;
        BasicBlock *FalseDest = Info->ExitForPath;
        if (Info->KnownValue->isOneValue())
          std::swap(TrueDest, FalseDest);

        auto *OldBr =
            cast<BranchInst>(CurrentLoop->getLoopPreheader()->getTerminator());
        emitPreheaderBranchOnCondition(LoopCond, Info->KnownValue, TrueDest,
                                       FalseDest, OldBr, TI,
                                       Info->InstToDuplicate);
        delete OldBr;
        RedoLoop = false;
        return true;
      }

      // Otherwise, the path is not a no-op. Run regular unswitching.
      if (unswitchIfProfitable(LoopCond, Info->KnownValue,
                               CurrentLoop->getHeader()->getTerminator(),
                               Info->InstToDuplicate)) {
        ++NumBranches;
        RedoLoop = false;
        return true;
      }
    }
  }

  return Changed;
}

/// Check to see if all paths from BB exit the loop with no side effects
/// (including infinite loops).
///
/// If true, we return true and set ExitBB to the block we
/// exit through.
///
static bool isTrivialLoopExitBlockHelper(Loop *L, BasicBlock *BB,
                                         BasicBlock *&ExitBB,
                                         std::set<BasicBlock*> &Visited) {
  if (!Visited.insert(BB).second) {
    // Already visited. Without more analysis, this could indicate an infinite
    // loop.
    return false;
  }
  if (!L->contains(BB)) {
    // Otherwise, this is a loop exit, this is fine so long as this is the
    // first exit.
    if (ExitBB) return false;
    ExitBB = BB;
    return true;
  }

  // Otherwise, this is an unvisited intra-loop node.  Check all successors.
  for (BasicBlock *Succ : successors(BB)) {
    // Check to see if the successor is a trivial loop exit.
    if (!isTrivialLoopExitBlockHelper(L, Succ, ExitBB, Visited))
      return false;
  }

  // Okay, everything after this looks good, check to make sure that this block
  // doesn't include any side effects.
  for (Instruction &I : *BB)
    if (I.mayHaveSideEffects())
      return false;

  return true;
}

/// Return true if the specified block unconditionally leads to an exit from
/// the specified loop, and has no side-effects in the process. If so, return
/// the block that is exited to, otherwise return null.
static BasicBlock *isTrivialLoopExitBlock(Loop *L, BasicBlock *BB) {
  std::set<BasicBlock*> Visited;
  Visited.insert(L->getHeader());  // Branches to header make infinite loops.
  BasicBlock *ExitBB = nullptr;
  if (isTrivialLoopExitBlockHelper(L, BB, ExitBB, Visited))
    return ExitBB;
  return nullptr;
}

/// We have found that we can unswitch CurrentLoop when LoopCond == Val to
/// simplify the loop.  If we decide that this is profitable,
/// unswitch the loop, reprocess the pieces, then return true.
bool LoopUnswitch::unswitchIfProfitable(Value *LoopCond, Constant *Val,
                                        Instruction *TI,
                                        ArrayRef<Instruction *> ToDuplicate) {
  // Check to see if it would be profitable to unswitch current loop.
  if (!BranchesInfo.costAllowsUnswitching()) {
    LLVM_DEBUG(dbgs() << "NOT unswitching loop %"
                      << CurrentLoop->getHeader()->getName()
                      << " at non-trivial condition '" << *Val
                      << "' == " << *LoopCond << "\n"
                      << ". Cost too high.\n");
    return false;
  }
  if (HasBranchDivergence &&
      getAnalysis<LegacyDivergenceAnalysis>().isDivergent(LoopCond)) {
    LLVM_DEBUG(dbgs() << "NOT unswitching loop %"
                      << CurrentLoop->getHeader()->getName()
                      << " at non-trivial condition '" << *Val
                      << "' == " << *LoopCond << "\n"
                      << ". Condition is divergent.\n");
    return false;
  }

  unswitchNontrivialCondition(LoopCond, Val, CurrentLoop, TI, ToDuplicate);
  return true;
}

/// Emit a conditional branch on two values if LIC == Val, branch to TrueDst,
/// otherwise branch to FalseDest. Insert the code immediately before OldBranch
/// and remove (but not erase!) it from the function.
void LoopUnswitch::emitPreheaderBranchOnCondition(
    Value *LIC, Constant *Val, BasicBlock *TrueDest, BasicBlock *FalseDest,
    BranchInst *OldBranch, Instruction *TI,
    ArrayRef<Instruction *> ToDuplicate) {
  assert(OldBranch->isUnconditional() && "Preheader is not split correctly");
  assert(TrueDest != FalseDest && "Branch targets should be different");

  // Insert a conditional branch on LIC to the two preheaders.  The original
  // code is the true version and the new code is the false version.
  Value *BranchVal = LIC;
  bool Swapped = false;

  if (!ToDuplicate.empty()) {
    ValueToValueMapTy Old2New;
    for (Instruction *I : reverse(ToDuplicate)) {
      auto *New = I->clone();
      New->insertBefore(OldBranch);
      RemapInstruction(New, Old2New,
                       RF_NoModuleLevelChanges | RF_IgnoreMissingLocals);
      Old2New[I] = New;

      if (MSSAU) {
        MemorySSA *MSSA = MSSAU->getMemorySSA();
        auto *MemA = dyn_cast_or_null<MemoryUse>(MSSA->getMemoryAccess(I));
        if (!MemA)
          continue;

        Loop *L = LI->getLoopFor(I->getParent());
        auto *DefiningAccess = MemA->getDefiningAccess();
        // Get the first defining access before the loop.
        while (L->contains(DefiningAccess->getBlock())) {
          // If the defining access is a MemoryPhi, get the incoming
          // value for the pre-header as defining access.
          if (auto *MemPhi = dyn_cast<MemoryPhi>(DefiningAccess)) {
            DefiningAccess =
                MemPhi->getIncomingValueForBlock(L->getLoopPreheader());
          } else {
            DefiningAccess =
                cast<MemoryDef>(DefiningAccess)->getDefiningAccess();
          }
        }
        MSSAU->createMemoryAccessInBB(New, DefiningAccess, New->getParent(),
                                      MemorySSA::BeforeTerminator);
      }
    }
    BranchVal = Old2New[ToDuplicate[0]];
  } else {

    if (!isa<ConstantInt>(Val) ||
        Val->getType() != Type::getInt1Ty(LIC->getContext()))
      BranchVal = new ICmpInst(OldBranch, ICmpInst::ICMP_EQ, LIC, Val);
    else if (Val != ConstantInt::getTrue(Val->getContext())) {
      // We want to enter the new loop when the condition is true.
      std::swap(TrueDest, FalseDest);
      Swapped = true;
    }
  }

  // Old branch will be removed, so save its parent and successor to update the
  // DomTree.
  auto *OldBranchSucc = OldBranch->getSuccessor(0);
  auto *OldBranchParent = OldBranch->getParent();

  // Insert the new branch.
  BranchInst *BI =
      IRBuilder<>(OldBranch).CreateCondBr(BranchVal, TrueDest, FalseDest, TI);
  if (Swapped)
    BI->swapProfMetadata();

  // Remove the old branch so there is only one branch at the end. This is
  // needed to perform DomTree's internal DFS walk on the function's CFG.
  OldBranch->removeFromParent();

  // Inform the DT about the new branch.
  if (DT) {
    // First, add both successors.
    SmallVector<DominatorTree::UpdateType, 3> Updates;
    if (TrueDest != OldBranchSucc)
      Updates.push_back({DominatorTree::Insert, OldBranchParent, TrueDest});
    if (FalseDest != OldBranchSucc)
      Updates.push_back({DominatorTree::Insert, OldBranchParent, FalseDest});
    // If both of the new successors are different from the old one, inform the
    // DT that the edge was deleted.
    if (OldBranchSucc != TrueDest && OldBranchSucc != FalseDest) {
      Updates.push_back({DominatorTree::Delete, OldBranchParent, OldBranchSucc});
    }

    if (MSSAU)
      MSSAU->applyUpdates(Updates, *DT, /*UpdateDT=*/true);
    else
      DT->applyUpdates(Updates);
  }

  // If either edge is critical, split it. This helps preserve LoopSimplify
  // form for enclosing loops.
  auto Options =
      CriticalEdgeSplittingOptions(DT, LI, MSSAU.get()).setPreserveLCSSA();
  SplitCriticalEdge(BI, 0, Options);
  SplitCriticalEdge(BI, 1, Options);
}

/// Given a loop that has a trivial unswitchable condition in it (a cond branch
/// from its header block to its latch block, where the path through the loop
/// that doesn't execute its body has no side-effects), unswitch it. This
/// doesn't involve any code duplication, just moving the conditional branch
/// outside of the loop and updating loop info.
void LoopUnswitch::unswitchTrivialCondition(Loop *L, Value *Cond, Constant *Val,
                                            BasicBlock *ExitBlock,
                                            Instruction *TI) {
  LLVM_DEBUG(dbgs() << "loop-unswitch: Trivial-Unswitch loop %"
                    << LoopHeader->getName() << " [" << L->getBlocks().size()
                    << " blocks] in Function "
                    << L->getHeader()->getParent()->getName()
                    << " on cond: " << *Val << " == " << *Cond << "\n");
  // We are going to make essential changes to CFG. This may invalidate cached
  // information for L or one of its parent loops in SCEV.
  if (auto *SEWP = getAnalysisIfAvailable<ScalarEvolutionWrapperPass>())
    SEWP->getSE().forgetTopmostLoop(L);

  // First step, split the preheader, so that we know that there is a safe place
  // to insert the conditional branch.  We will change LoopPreheader to have a
  // conditional branch on Cond.
  BasicBlock *NewPH = SplitEdge(LoopPreheader, LoopHeader, DT, LI, MSSAU.get());

  // Now that we have a place to insert the conditional branch, create a place
  // to branch to: this is the exit block out of the loop that we should
  // short-circuit to.

  // Split this block now, so that the loop maintains its exit block, and so
  // that the jump from the preheader can execute the contents of the exit block
  // without actually branching to it (the exit block should be dominated by the
  // loop header, not the preheader).
  assert(!L->contains(ExitBlock) && "Exit block is in the loop?");
  BasicBlock *NewExit =
      SplitBlock(ExitBlock, &ExitBlock->front(), DT, LI, MSSAU.get());

  // Okay, now we have a position to branch from and a position to branch to,
  // insert the new conditional branch.
  auto *OldBranch = dyn_cast<BranchInst>(LoopPreheader->getTerminator());
  assert(OldBranch && "Failed to split the preheader");
  emitPreheaderBranchOnCondition(Cond, Val, NewExit, NewPH, OldBranch, TI);

  // emitPreheaderBranchOnCondition removed the OldBranch from the function.
  // Delete it, as it is no longer needed.
  delete OldBranch;

  // We need to reprocess this loop, it could be unswitched again.
  RedoLoop = true;

  // Now that we know that the loop is never entered when this condition is a
  // particular value, rewrite the loop with this info.  We know that this will
  // at least eliminate the old branch.
  rewriteLoopBodyWithConditionConstant(L, Cond, Val, /*IsEqual=*/false);

  ++NumTrivial;
}

/// Check if the first non-constant condition starting from the loop header is
/// a trivial unswitch condition: that is, a condition controls whether or not
/// the loop does anything at all. If it is a trivial condition, unswitching
/// produces no code duplications (equivalently, it produces a simpler loop and
/// a new empty loop, which gets deleted). Therefore always unswitch trivial
/// condition.
bool LoopUnswitch::tryTrivialLoopUnswitch(bool &Changed) {
  BasicBlock *CurrentBB = CurrentLoop->getHeader();
  Instruction *CurrentTerm = CurrentBB->getTerminator();
  LLVMContext &Context = CurrentBB->getContext();

  // If loop header has only one reachable successor (currently via an
  // unconditional branch or constant foldable conditional branch, but
  // should also consider adding constant foldable switch instruction in
  // future), we should keep looking for trivial condition candidates in
  // the successor as well. An alternative is to constant fold conditions
  // and merge successors into loop header (then we only need to check header's
  // terminator). The reason for not doing this in LoopUnswitch pass is that
  // it could potentially break LoopPassManager's invariants. Folding dead
  // branches could either eliminate the current loop or make other loops
  // unreachable. LCSSA form might also not be preserved after deleting
  // branches. The following code keeps traversing loop header's successors
  // until it finds the trivial condition candidate (condition that is not a
  // constant). Since unswitching generates branches with constant conditions,
  // this scenario could be very common in practice.
  SmallPtrSet<BasicBlock*, 8> Visited;

  while (true) {
    // If we exit loop or reach a previous visited block, then
    // we can not reach any trivial condition candidates (unfoldable
    // branch instructions or switch instructions) and no unswitch
    // can happen. Exit and return false.
    if (!CurrentLoop->contains(CurrentBB) || !Visited.insert(CurrentBB).second)
      return false;

    // Check if this loop will execute any side-effecting instructions (e.g.
    // stores, calls, volatile loads) in the part of the loop that the code
    // *would* execute. Check the header first.
    for (Instruction &I : *CurrentBB)
      if (I.mayHaveSideEffects())
        return false;

    if (BranchInst *BI = dyn_cast<BranchInst>(CurrentTerm)) {
      if (BI->isUnconditional()) {
        CurrentBB = BI->getSuccessor(0);
      } else if (BI->getCondition() == ConstantInt::getTrue(Context)) {
        CurrentBB = BI->getSuccessor(0);
      } else if (BI->getCondition() == ConstantInt::getFalse(Context)) {
        CurrentBB = BI->getSuccessor(1);
      } else {
        // Found a trivial condition candidate: non-foldable conditional branch.
        break;
      }
    } else if (SwitchInst *SI = dyn_cast<SwitchInst>(CurrentTerm)) {
      // At this point, any constant-foldable instructions should have probably
      // been folded.
      ConstantInt *Cond = dyn_cast<ConstantInt>(SI->getCondition());
      if (!Cond)
        break;
      // Find the target block we are definitely going to.
      CurrentBB = SI->findCaseValue(Cond)->getCaseSuccessor();
    } else {
      // We do not understand these terminator instructions.
      break;
    }

    CurrentTerm = CurrentBB->getTerminator();
  }

  // CondVal is the condition that controls the trivial condition.
  // LoopExitBB is the BasicBlock that loop exits when meets trivial condition.
  Constant *CondVal = nullptr;
  BasicBlock *LoopExitBB = nullptr;

  if (BranchInst *BI = dyn_cast<BranchInst>(CurrentTerm)) {
    // If this isn't branching on an invariant condition, we can't unswitch it.
    if (!BI->isConditional())
      return false;

    Value *LoopCond = findLIVLoopCondition(BI->getCondition(), CurrentLoop,
                                           Changed, MSSAU.get())
                          .first;

    // Unswitch only if the trivial condition itself is an LIV (not
    // partial LIV which could occur in and/or)
    if (!LoopCond || LoopCond != BI->getCondition())
      return false;

    // Check to see if a successor of the branch is guaranteed to
    // exit through a unique exit block without having any
    // side-effects.  If so, determine the value of Cond that causes
    // it to do this.
    if ((LoopExitBB =
             isTrivialLoopExitBlock(CurrentLoop, BI->getSuccessor(0)))) {
      CondVal = ConstantInt::getTrue(Context);
    } else if ((LoopExitBB =
                    isTrivialLoopExitBlock(CurrentLoop, BI->getSuccessor(1)))) {
      CondVal = ConstantInt::getFalse(Context);
    }

    // If we didn't find a single unique LoopExit block, or if the loop exit
    // block contains phi nodes, this isn't trivial.
    if (!LoopExitBB || isa<PHINode>(LoopExitBB->begin()))
      return false;   // Can't handle this.

    if (equalityPropUnSafe(*LoopCond))
      return false;

    unswitchTrivialCondition(CurrentLoop, LoopCond, CondVal, LoopExitBB,
                             CurrentTerm);
    ++NumBranches;
    return true;
  } else if (SwitchInst *SI = dyn_cast<SwitchInst>(CurrentTerm)) {
    // If this isn't switching on an invariant condition, we can't unswitch it.
    Value *LoopCond = findLIVLoopCondition(SI->getCondition(), CurrentLoop,
                                           Changed, MSSAU.get())
                          .first;

    // Unswitch only if the trivial condition itself is an LIV (not
    // partial LIV which could occur in and/or)
    if (!LoopCond || LoopCond != SI->getCondition())
      return false;

    // Check to see if a successor of the switch is guaranteed to go to the
    // latch block or exit through a one exit block without having any
    // side-effects.  If so, determine the value of Cond that causes it to do
    // this.
    // Note that we can't trivially unswitch on the default case or
    // on already unswitched cases.
    for (auto Case : SI->cases()) {
      BasicBlock *LoopExitCandidate;
      if ((LoopExitCandidate =
               isTrivialLoopExitBlock(CurrentLoop, Case.getCaseSuccessor()))) {
        // Okay, we found a trivial case, remember the value that is trivial.
        ConstantInt *CaseVal = Case.getCaseValue();

        // Check that it was not unswitched before, since already unswitched
        // trivial vals are looks trivial too.
        if (BranchesInfo.isUnswitched(SI, CaseVal))
          continue;
        LoopExitBB = LoopExitCandidate;
        CondVal = CaseVal;
        break;
      }
    }

    // If we didn't find a single unique LoopExit block, or if the loop exit
    // block contains phi nodes, this isn't trivial.
    if (!LoopExitBB || isa<PHINode>(LoopExitBB->begin()))
      return false;   // Can't handle this.

    unswitchTrivialCondition(CurrentLoop, LoopCond, CondVal, LoopExitBB,
                             nullptr);

    // We are only unswitching full LIV.
    BranchesInfo.setUnswitched(SI, CondVal);
    ++NumSwitches;
    return true;
  }
  return false;
}

/// Split all of the edges from inside the loop to their exit blocks.
/// Update the appropriate Phi nodes as we do so.
void LoopUnswitch::splitExitEdges(
    Loop *L, const SmallVectorImpl<BasicBlock *> &ExitBlocks) {

  for (unsigned I = 0, E = ExitBlocks.size(); I != E; ++I) {
    BasicBlock *ExitBlock = ExitBlocks[I];
    SmallVector<BasicBlock *, 4> Preds(pred_begin(ExitBlock),
                                       pred_end(ExitBlock));

    // Although SplitBlockPredecessors doesn't preserve loop-simplify in
    // general, if we call it on all predecessors of all exits then it does.
    SplitBlockPredecessors(ExitBlock, Preds, ".us-lcssa", DT, LI, MSSAU.get(),
                           /*PreserveLCSSA*/ true);
  }
}

/// We determined that the loop is profitable to unswitch when LIC equal Val.
/// Split it into loop versions and test the condition outside of either loop.
/// Return the loops created as Out1/Out2.
void LoopUnswitch::unswitchNontrivialCondition(
    Value *LIC, Constant *Val, Loop *L, Instruction *TI,
    ArrayRef<Instruction *> ToDuplicate) {
  Function *F = LoopHeader->getParent();
  LLVM_DEBUG(dbgs() << "loop-unswitch: Unswitching loop %"
                    << LoopHeader->getName() << " [" << L->getBlocks().size()
                    << " blocks] in Function " << F->getName() << " when '"
                    << *Val << "' == " << *LIC << "\n");

  // We are going to make essential changes to CFG. This may invalidate cached
  // information for L or one of its parent loops in SCEV.
  if (auto *SEWP = getAnalysisIfAvailable<ScalarEvolutionWrapperPass>())
    SEWP->getSE().forgetTopmostLoop(L);

  LoopBlocks.clear();
  NewBlocks.clear();

  if (MSSAU && VerifyMemorySSA)
    MSSA->verifyMemorySSA();

  // First step, split the preheader and exit blocks, and add these blocks to
  // the LoopBlocks list.
  BasicBlock *NewPreheader =
      SplitEdge(LoopPreheader, LoopHeader, DT, LI, MSSAU.get());
  LoopBlocks.push_back(NewPreheader);

  // We want the loop to come after the preheader, but before the exit blocks.
  llvm::append_range(LoopBlocks, L->blocks());

  SmallVector<BasicBlock*, 8> ExitBlocks;
  L->getUniqueExitBlocks(ExitBlocks);

  // Split all of the edges from inside the loop to their exit blocks.  Update
  // the appropriate Phi nodes as we do so.
  splitExitEdges(L, ExitBlocks);

  // The exit blocks may have been changed due to edge splitting, recompute.
  ExitBlocks.clear();
  L->getUniqueExitBlocks(ExitBlocks);

  // Add exit blocks to the loop blocks.
  llvm::append_range(LoopBlocks, ExitBlocks);

  // Next step, clone all of the basic blocks that make up the loop (including
  // the loop preheader and exit blocks), keeping track of the mapping between
  // the instructions and blocks.
  NewBlocks.reserve(LoopBlocks.size());
  ValueToValueMapTy VMap;
  for (unsigned I = 0, E = LoopBlocks.size(); I != E; ++I) {
    BasicBlock *NewBB = CloneBasicBlock(LoopBlocks[I], VMap, ".us", F);

    NewBlocks.push_back(NewBB);
    VMap[LoopBlocks[I]] = NewBB; // Keep the BB mapping.
  }

  // Splice the newly inserted blocks into the function right before the
  // original preheader.
  F->getBasicBlockList().splice(NewPreheader->getIterator(),
                                F->getBasicBlockList(),
                                NewBlocks[0]->getIterator(), F->end());

  // Now we create the new Loop object for the versioned loop.
  Loop *NewLoop = cloneLoop(L, L->getParentLoop(), VMap, LI, LPM);

  // Recalculate unswitching quota, inherit simplified switches info for NewBB,
  // Probably clone more loop-unswitch related loop properties.
  BranchesInfo.cloneData(NewLoop, L, VMap);

  Loop *ParentLoop = L->getParentLoop();
  if (ParentLoop) {
    // Make sure to add the cloned preheader and exit blocks to the parent loop
    // as well.
    ParentLoop->addBasicBlockToLoop(NewBlocks[0], *LI);
  }

  for (unsigned EBI = 0, EBE = ExitBlocks.size(); EBI != EBE; ++EBI) {
    BasicBlock *NewExit = cast<BasicBlock>(VMap[ExitBlocks[EBI]]);
    // The new exit block should be in the same loop as the old one.
    if (Loop *ExitBBLoop = LI->getLoopFor(ExitBlocks[EBI]))
      ExitBBLoop->addBasicBlockToLoop(NewExit, *LI);

    assert(NewExit->getTerminator()->getNumSuccessors() == 1 &&
           "Exit block should have been split to have one successor!");
    BasicBlock *ExitSucc = NewExit->getTerminator()->getSuccessor(0);

    // If the successor of the exit block had PHI nodes, add an entry for
    // NewExit.
    for (PHINode &PN : ExitSucc->phis()) {
      Value *V = PN.getIncomingValueForBlock(ExitBlocks[EBI]);
      ValueToValueMapTy::iterator It = VMap.find(V);
      if (It != VMap.end()) V = It->second;
      PN.addIncoming(V, NewExit);
    }

    if (LandingPadInst *LPad = NewExit->getLandingPadInst()) {
      PHINode *PN = PHINode::Create(LPad->getType(), 0, "",
                                    &*ExitSucc->getFirstInsertionPt());

      for (BasicBlock *BB : predecessors(ExitSucc)) {
        LandingPadInst *LPI = BB->getLandingPadInst();
        LPI->replaceAllUsesWith(PN);
        PN->addIncoming(LPI, BB);
      }
    }
  }

  // Rewrite the code to refer to itself.
  for (unsigned NBI = 0, NBE = NewBlocks.size(); NBI != NBE; ++NBI) {
    for (Instruction &I : *NewBlocks[NBI]) {
      RemapInstruction(&I, VMap,
                       RF_NoModuleLevelChanges | RF_IgnoreMissingLocals);
      if (auto *II = dyn_cast<IntrinsicInst>(&I))
        if (II->getIntrinsicID() == Intrinsic::assume)
          AC->registerAssumption(II);
    }
  }

  // Rewrite the original preheader to select between versions of the loop.
  BranchInst *OldBR = cast<BranchInst>(LoopPreheader->getTerminator());
  assert(OldBR->isUnconditional() && OldBR->getSuccessor(0) == LoopBlocks[0] &&
         "Preheader splitting did not work correctly!");

  if (MSSAU) {
    // Update MemorySSA after cloning, and before splitting to unreachables,
    // since that invalidates the 1:1 mapping of clones in VMap.
    LoopBlocksRPO LBRPO(L);
    LBRPO.perform(LI);
    MSSAU->updateForClonedLoop(LBRPO, ExitBlocks, VMap);
  }

  // Emit the new branch that selects between the two versions of this loop.
  emitPreheaderBranchOnCondition(LIC, Val, NewBlocks[0], LoopBlocks[0], OldBR,
                                 TI, ToDuplicate);
  if (MSSAU) {
    // Update MemoryPhis in Exit blocks.
    MSSAU->updateExitBlocksForClonedLoop(ExitBlocks, VMap, *DT);
    if (VerifyMemorySSA)
      MSSA->verifyMemorySSA();
  }

  // The OldBr was replaced by a new one and removed (but not erased) by
  // emitPreheaderBranchOnCondition. It is no longer needed, so delete it.
  delete OldBR;

  LoopProcessWorklist.push_back(NewLoop);
  RedoLoop = true;

  // Keep a WeakTrackingVH holding onto LIC.  If the first call to
  // RewriteLoopBody
  // deletes the instruction (for example by simplifying a PHI that feeds into
  // the condition that we're unswitching on), we don't rewrite the second
  // iteration.
  WeakTrackingVH LICHandle(LIC);

  if (ToDuplicate.empty()) {
    // Now we rewrite the original code to know that the condition is true and
    // the new code to know that the condition is false.
    rewriteLoopBodyWithConditionConstant(L, LIC, Val, /*IsEqual=*/false);

    // It's possible that simplifying one loop could cause the other to be
    // changed to another value or a constant.  If its a constant, don't
    // simplify it.
    if (!LoopProcessWorklist.empty() && LoopProcessWorklist.back() == NewLoop &&
        LICHandle && !isa<Constant>(LICHandle))
      rewriteLoopBodyWithConditionConstant(NewLoop, LICHandle, Val,
                                           /*IsEqual=*/true);
  } else {
    // Partial unswitching. Update the condition in the right loop with the
    // constant.
    auto *CC = cast<ConstantInt>(Val);
    if (CC->isOneValue()) {
      rewriteLoopBodyWithConditionConstant(NewLoop, VMap[LIC], Val,
                                           /*IsEqual=*/true);
    } else
      rewriteLoopBodyWithConditionConstant(L, LIC, Val, /*IsEqual=*/true);

    // Mark the new loop as partially unswitched, to avoid unswitching on the
    // same condition again.
    auto &Context = NewLoop->getHeader()->getContext();
    MDNode *DisableUnswitchMD = MDNode::get(
        Context, MDString::get(Context, "llvm.loop.unswitch.partial.disable"));
    MDNode *NewLoopID = makePostTransformationMetadata(
        Context, L->getLoopID(), {"llvm.loop.unswitch.partial"},
        {DisableUnswitchMD});
    NewLoop->setLoopID(NewLoopID);
  }

  if (MSSA && VerifyMemorySSA)
    MSSA->verifyMemorySSA();
}

/// Remove all instances of I from the worklist vector specified.
static void removeFromWorklist(Instruction *I,
                               std::vector<Instruction *> &Worklist) {
  llvm::erase_value(Worklist, I);
}

/// When we find that I really equals V, remove I from the
/// program, replacing all uses with V and update the worklist.
static void replaceUsesOfWith(Instruction *I, Value *V,
                              std::vector<Instruction *> &Worklist, Loop *L,
                              LPPassManager *LPM, MemorySSAUpdater *MSSAU) {
  LLVM_DEBUG(dbgs() << "Replace with '" << *V << "': " << *I << "\n");

  // Add uses to the worklist, which may be dead now.
  for (unsigned i = 0, e = I->getNumOperands(); i != e; ++i)
    if (Instruction *Use = dyn_cast<Instruction>(I->getOperand(i)))
      Worklist.push_back(Use);

  // Add users to the worklist which may be simplified now.
  for (User *U : I->users())
    Worklist.push_back(cast<Instruction>(U));
  removeFromWorklist(I, Worklist);
  I->replaceAllUsesWith(V);
  if (!I->mayHaveSideEffects()) {
    if (MSSAU)
      MSSAU->removeMemoryAccess(I);
    I->eraseFromParent();
  }
  ++NumSimplify;
}

/// We know either that the value LIC has the value specified by Val in the
/// specified loop, or we know it does NOT have that value.
/// Rewrite any uses of LIC or of properties correlated to it.
void LoopUnswitch::rewriteLoopBodyWithConditionConstant(Loop *L, Value *LIC,
                                                        Constant *Val,
                                                        bool IsEqual) {
  assert(!isa<Constant>(LIC) && "Why are we unswitching on a constant?");

  // FIXME: Support correlated properties, like:
  //  for (...)
  //    if (li1 < li2)
  //      ...
  //    if (li1 > li2)
  //      ...

  // FOLD boolean conditions (X|LIC), (X&LIC).  Fold conditional branches,
  // selects, switches.
  std::vector<Instruction*> Worklist;
  LLVMContext &Context = Val->getContext();

  // If we know that LIC == Val, or that LIC == NotVal, just replace uses of LIC
  // in the loop with the appropriate one directly.
  if (IsEqual || (isa<ConstantInt>(Val) &&
      Val->getType()->isIntegerTy(1))) {
    Value *Replacement;
    if (IsEqual)
      Replacement = Val;
    else
      Replacement = ConstantInt::get(Type::getInt1Ty(Val->getContext()),
                                     !cast<ConstantInt>(Val)->getZExtValue());

    for (User *U : LIC->users()) {
      Instruction *UI = dyn_cast<Instruction>(U);
      if (!UI || !L->contains(UI))
        continue;
      Worklist.push_back(UI);
    }

    for (Instruction *UI : Worklist)
      UI->replaceUsesOfWith(LIC, Replacement);

    simplifyCode(Worklist, L);
    return;
  }

  // Otherwise, we don't know the precise value of LIC, but we do know that it
  // is certainly NOT "Val".  As such, simplify any uses in the loop that we
  // can.  This case occurs when we unswitch switch statements.
  for (User *U : LIC->users()) {
    Instruction *UI = dyn_cast<Instruction>(U);
    if (!UI || !L->contains(UI))
      continue;

    // At this point, we know LIC is definitely not Val. Try to use some simple
    // logic to simplify the user w.r.t. to the context.
    if (Value *Replacement = simplifyInstructionWithNotEqual(UI, LIC, Val)) {
      if (LI->replacementPreservesLCSSAForm(UI, Replacement)) {
        // This in-loop instruction has been simplified w.r.t. its context,
        // i.e. LIC != Val, make sure we propagate its replacement value to
        // all its users.
        //
        // We can not yet delete UI, the LIC user, yet, because that would invalidate
        // the LIC->users() iterator !. However, we can make this instruction
        // dead by replacing all its users and push it onto the worklist so that
        // it can be properly deleted and its operands simplified.
        UI->replaceAllUsesWith(Replacement);
      }
    }

    // This is a LIC user, push it into the worklist so that simplifyCode can
    // attempt to simplify it.
    Worklist.push_back(UI);

    // If we know that LIC is not Val, use this info to simplify code.
    SwitchInst *SI = dyn_cast<SwitchInst>(UI);
    if (!SI || !isa<ConstantInt>(Val)) continue;

    // NOTE: if a case value for the switch is unswitched out, we record it
    // after the unswitch finishes. We can not record it here as the switch
    // is not a direct user of the partial LIV.
    SwitchInst::CaseHandle DeadCase =
        *SI->findCaseValue(cast<ConstantInt>(Val));
    // Default case is live for multiple values.
    if (DeadCase == *SI->case_default())
      continue;

    // Found a dead case value.  Don't remove PHI nodes in the
    // successor if they become single-entry, those PHI nodes may
    // be in the Users list.

    BasicBlock *Switch = SI->getParent();
    BasicBlock *SISucc = DeadCase.getCaseSuccessor();
    BasicBlock *Latch = L->getLoopLatch();

    if (!SI->findCaseDest(SISucc)) continue;  // Edge is critical.
    // If the DeadCase successor dominates the loop latch, then the
    // transformation isn't safe since it will delete the sole predecessor edge
    // to the latch.
    if (Latch && DT->dominates(SISucc, Latch))
      continue;

    // FIXME: This is a hack.  We need to keep the successor around
    // and hooked up so as to preserve the loop structure, because
    // trying to update it is complicated.  So instead we preserve the
    // loop structure and put the block on a dead code path.
    SplitEdge(Switch, SISucc, DT, LI, MSSAU.get());
    // Compute the successors instead of relying on the return value
    // of SplitEdge, since it may have split the switch successor
    // after PHI nodes.
    BasicBlock *NewSISucc = DeadCase.getCaseSuccessor();
    BasicBlock *OldSISucc = *succ_begin(NewSISucc);
    // Create an "unreachable" destination.
    BasicBlock *Abort = BasicBlock::Create(Context, "us-unreachable",
                                           Switch->getParent(),
                                           OldSISucc);
    new UnreachableInst(Context, Abort);
    // Force the new case destination to branch to the "unreachable"
    // block while maintaining a (dead) CFG edge to the old block.
    NewSISucc->getTerminator()->eraseFromParent();
    BranchInst::Create(Abort, OldSISucc,
                       ConstantInt::getTrue(Context), NewSISucc);
    // Release the PHI operands for this edge.
    for (PHINode &PN : NewSISucc->phis())
      PN.setIncomingValueForBlock(Switch, UndefValue::get(PN.getType()));
    // Tell the domtree about the new block. We don't fully update the
    // domtree here -- instead we force it to do a full recomputation
    // after the pass is complete -- but we do need to inform it of
    // new blocks.
    DT->addNewBlock(Abort, NewSISucc);
  }

  simplifyCode(Worklist, L);
}

/// Now that we have simplified some instructions in the loop, walk over it and
/// constant prop, dce, and fold control flow where possible. Note that this is
/// effectively a very simple loop-structure-aware optimizer. During processing
/// of this loop, L could very well be deleted, so it must not be used.
///
/// FIXME: When the loop optimizer is more mature, separate this out to a new
/// pass.
///
void LoopUnswitch::simplifyCode(std::vector<Instruction *> &Worklist, Loop *L) {
  const DataLayout &DL = L->getHeader()->getModule()->getDataLayout();
  while (!Worklist.empty()) {
    Instruction *I = Worklist.back();
    Worklist.pop_back();

    // Simple DCE.
    if (isInstructionTriviallyDead(I)) {
      LLVM_DEBUG(dbgs() << "Remove dead instruction '" << *I << "\n");

      // Add uses to the worklist, which may be dead now.
      for (unsigned i = 0, e = I->getNumOperands(); i != e; ++i)
        if (Instruction *Use = dyn_cast<Instruction>(I->getOperand(i)))
          Worklist.push_back(Use);
      removeFromWorklist(I, Worklist);
      if (MSSAU)
        MSSAU->removeMemoryAccess(I);
      I->eraseFromParent();
      ++NumSimplify;
      continue;
    }

    // See if instruction simplification can hack this up.  This is common for
    // things like "select false, X, Y" after unswitching made the condition be
    // 'false'.  TODO: update the domtree properly so we can pass it here.
    if (Value *V = SimplifyInstruction(I, DL))
      if (LI->replacementPreservesLCSSAForm(I, V)) {
        replaceUsesOfWith(I, V, Worklist, L, LPM, MSSAU.get());
        continue;
      }

    // Special case hacks that appear commonly in unswitched code.
    if (BranchInst *BI = dyn_cast<BranchInst>(I)) {
      if (BI->isUnconditional()) {
        // If BI's parent is the only pred of the successor, fold the two blocks
        // together.
        BasicBlock *Pred = BI->getParent();
        (void)Pred;
        BasicBlock *Succ = BI->getSuccessor(0);
        BasicBlock *SinglePred = Succ->getSinglePredecessor();
        if (!SinglePred) continue;  // Nothing to do.
        assert(SinglePred == Pred && "CFG broken");

        // Make the LPM and Worklist updates specific to LoopUnswitch.
        removeFromWorklist(BI, Worklist);
        auto SuccIt = Succ->begin();
        while (PHINode *PN = dyn_cast<PHINode>(SuccIt++)) {
          for (unsigned It = 0, E = PN->getNumOperands(); It != E; ++It)
            if (Instruction *Use = dyn_cast<Instruction>(PN->getOperand(It)))
              Worklist.push_back(Use);
          for (User *U : PN->users())
            Worklist.push_back(cast<Instruction>(U));
          removeFromWorklist(PN, Worklist);
          ++NumSimplify;
        }
        // Merge the block and make the remaining analyses updates.
        DomTreeUpdater DTU(DT, DomTreeUpdater::UpdateStrategy::Eager);
        MergeBlockIntoPredecessor(Succ, &DTU, LI, MSSAU.get());
        ++NumSimplify;
        continue;
      }

      continue;
    }
  }
}

/// Simple simplifications we can do given the information that Cond is
/// definitely not equal to Val.
Value *LoopUnswitch::simplifyInstructionWithNotEqual(Instruction *Inst,
                                                     Value *Invariant,
                                                     Constant *Val) {
  // icmp eq cond, val -> false
  ICmpInst *CI = dyn_cast<ICmpInst>(Inst);
  if (CI && CI->isEquality()) {
    Value *Op0 = CI->getOperand(0);
    Value *Op1 = CI->getOperand(1);
    if ((Op0 == Invariant && Op1 == Val) || (Op0 == Val && Op1 == Invariant)) {
      LLVMContext &Ctx = Inst->getContext();
      if (CI->getPredicate() == CmpInst::ICMP_EQ)
        return ConstantInt::getFalse(Ctx);
      else
        return ConstantInt::getTrue(Ctx);
     }
  }

  // FIXME: there may be other opportunities, e.g. comparison with floating
  // point, or Invariant - Val != 0, etc.
  return nullptr;
}