| //===- Thumb1FrameLowering.cpp - Thumb1 Frame Information -----------------===// |
| // |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. |
| // See https://llvm.org/LICENSE.txt for license information. |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file contains the Thumb1 implementation of TargetFrameLowering class. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #include "Thumb1FrameLowering.h" |
| #include "ARMBaseInstrInfo.h" |
| #include "ARMBaseRegisterInfo.h" |
| #include "ARMMachineFunctionInfo.h" |
| #include "ARMSubtarget.h" |
| #include "Thumb1InstrInfo.h" |
| #include "ThumbRegisterInfo.h" |
| #include "Utils/ARMBaseInfo.h" |
| #include "llvm/ADT/BitVector.h" |
| #include "llvm/ADT/STLExtras.h" |
| #include "llvm/ADT/SmallVector.h" |
| #include "llvm/CodeGen/LivePhysRegs.h" |
| #include "llvm/CodeGen/MachineBasicBlock.h" |
| #include "llvm/CodeGen/MachineFrameInfo.h" |
| #include "llvm/CodeGen/MachineFunction.h" |
| #include "llvm/CodeGen/MachineInstr.h" |
| #include "llvm/CodeGen/MachineInstrBuilder.h" |
| #include "llvm/CodeGen/MachineModuleInfo.h" |
| #include "llvm/CodeGen/MachineOperand.h" |
| #include "llvm/CodeGen/MachineRegisterInfo.h" |
| #include "llvm/CodeGen/TargetInstrInfo.h" |
| #include "llvm/CodeGen/TargetOpcodes.h" |
| #include "llvm/CodeGen/TargetSubtargetInfo.h" |
| #include "llvm/IR/DebugLoc.h" |
| #include "llvm/MC/MCContext.h" |
| #include "llvm/MC/MCDwarf.h" |
| #include "llvm/MC/MCRegisterInfo.h" |
| #include "llvm/Support/Compiler.h" |
| #include "llvm/Support/ErrorHandling.h" |
| #include "llvm/Support/MathExtras.h" |
| #include <bitset> |
| #include <cassert> |
| #include <iterator> |
| #include <vector> |
| |
| using namespace llvm; |
| |
| Thumb1FrameLowering::Thumb1FrameLowering(const ARMSubtarget &sti) |
| : ARMFrameLowering(sti) {} |
| |
| bool Thumb1FrameLowering::hasReservedCallFrame(const MachineFunction &MF) const{ |
| const MachineFrameInfo &MFI = MF.getFrameInfo(); |
| unsigned CFSize = MFI.getMaxCallFrameSize(); |
| // It's not always a good idea to include the call frame as part of the |
| // stack frame. ARM (especially Thumb) has small immediate offset to |
| // address the stack frame. So a large call frame can cause poor codegen |
| // and may even makes it impossible to scavenge a register. |
| if (CFSize >= ((1 << 8) - 1) * 4 / 2) // Half of imm8 * 4 |
| return false; |
| |
| return !MFI.hasVarSizedObjects(); |
| } |
| |
| static void |
| emitPrologueEpilogueSPUpdate(MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator &MBBI, |
| const TargetInstrInfo &TII, const DebugLoc &dl, |
| const ThumbRegisterInfo &MRI, int NumBytes, |
| unsigned ScratchReg, unsigned MIFlags) { |
| // If it would take more than three instructions to adjust the stack pointer |
| // using tADDspi/tSUBspi, load an immediate instead. |
| if (std::abs(NumBytes) > 508 * 3) { |
| // We use a different codepath here from the normal |
| // emitThumbRegPlusImmediate so we don't have to deal with register |
| // scavenging. (Scavenging could try to use the emergency spill slot |
| // before we've actually finished setting up the stack.) |
| if (ScratchReg == ARM::NoRegister) |
| report_fatal_error("Failed to emit Thumb1 stack adjustment"); |
| MachineFunction &MF = *MBB.getParent(); |
| const ARMSubtarget &ST = MF.getSubtarget<ARMSubtarget>(); |
| if (ST.genExecuteOnly()) { |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::t2MOVi32imm), ScratchReg) |
| .addImm(NumBytes).setMIFlags(MIFlags); |
| } else { |
| MRI.emitLoadConstPool(MBB, MBBI, dl, ScratchReg, 0, NumBytes, ARMCC::AL, |
| 0, MIFlags); |
| } |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::tADDhirr), ARM::SP) |
| .addReg(ARM::SP) |
| .addReg(ScratchReg, RegState::Kill) |
| .add(predOps(ARMCC::AL)) |
| .setMIFlags(MIFlags); |
| return; |
| } |
| // FIXME: This is assuming the heuristics in emitThumbRegPlusImmediate |
| // won't change. |
| emitThumbRegPlusImmediate(MBB, MBBI, dl, ARM::SP, ARM::SP, NumBytes, TII, |
| MRI, MIFlags); |
| |
| } |
| |
| static void emitCallSPUpdate(MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator &MBBI, |
| const TargetInstrInfo &TII, const DebugLoc &dl, |
| const ThumbRegisterInfo &MRI, int NumBytes, |
| unsigned MIFlags = MachineInstr::NoFlags) { |
| emitThumbRegPlusImmediate(MBB, MBBI, dl, ARM::SP, ARM::SP, NumBytes, TII, |
| MRI, MIFlags); |
| } |
| |
| |
| MachineBasicBlock::iterator Thumb1FrameLowering:: |
| eliminateCallFramePseudoInstr(MachineFunction &MF, MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator I) const { |
| const Thumb1InstrInfo &TII = |
| *static_cast<const Thumb1InstrInfo *>(STI.getInstrInfo()); |
| const ThumbRegisterInfo *RegInfo = |
| static_cast<const ThumbRegisterInfo *>(STI.getRegisterInfo()); |
| if (!hasReservedCallFrame(MF)) { |
| // If we have alloca, convert as follows: |
| // ADJCALLSTACKDOWN -> sub, sp, sp, amount |
| // ADJCALLSTACKUP -> add, sp, sp, amount |
| MachineInstr &Old = *I; |
| DebugLoc dl = Old.getDebugLoc(); |
| unsigned Amount = TII.getFrameSize(Old); |
| if (Amount != 0) { |
| // We need to keep the stack aligned properly. To do this, we round the |
| // amount of space needed for the outgoing arguments up to the next |
| // alignment boundary. |
| Amount = alignTo(Amount, getStackAlign()); |
| |
| // Replace the pseudo instruction with a new instruction... |
| unsigned Opc = Old.getOpcode(); |
| if (Opc == ARM::ADJCALLSTACKDOWN || Opc == ARM::tADJCALLSTACKDOWN) { |
| emitCallSPUpdate(MBB, I, TII, dl, *RegInfo, -Amount); |
| } else { |
| assert(Opc == ARM::ADJCALLSTACKUP || Opc == ARM::tADJCALLSTACKUP); |
| emitCallSPUpdate(MBB, I, TII, dl, *RegInfo, Amount); |
| } |
| } |
| } |
| return MBB.erase(I); |
| } |
| |
| void Thumb1FrameLowering::emitPrologue(MachineFunction &MF, |
| MachineBasicBlock &MBB) const { |
| MachineBasicBlock::iterator MBBI = MBB.begin(); |
| MachineFrameInfo &MFI = MF.getFrameInfo(); |
| ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>(); |
| MachineModuleInfo &MMI = MF.getMMI(); |
| const MCRegisterInfo *MRI = MMI.getContext().getRegisterInfo(); |
| const ThumbRegisterInfo *RegInfo = |
| static_cast<const ThumbRegisterInfo *>(STI.getRegisterInfo()); |
| const Thumb1InstrInfo &TII = |
| *static_cast<const Thumb1InstrInfo *>(STI.getInstrInfo()); |
| |
| unsigned ArgRegsSaveSize = AFI->getArgRegsSaveSize(); |
| unsigned NumBytes = MFI.getStackSize(); |
| assert(NumBytes >= ArgRegsSaveSize && |
| "ArgRegsSaveSize is included in NumBytes"); |
| const std::vector<CalleeSavedInfo> &CSI = MFI.getCalleeSavedInfo(); |
| |
| // Debug location must be unknown since the first debug location is used |
| // to determine the end of the prologue. |
| DebugLoc dl; |
| |
| Register FramePtr = RegInfo->getFrameRegister(MF); |
| unsigned BasePtr = RegInfo->getBaseRegister(); |
| int CFAOffset = 0; |
| |
| // Thumb add/sub sp, imm8 instructions implicitly multiply the offset by 4. |
| NumBytes = (NumBytes + 3) & ~3; |
| MFI.setStackSize(NumBytes); |
| |
| // Determine the sizes of each callee-save spill areas and record which frame |
| // belongs to which callee-save spill areas. |
| unsigned GPRCS1Size = 0, GPRCS2Size = 0, DPRCSSize = 0; |
| int FramePtrSpillFI = 0; |
| |
| if (ArgRegsSaveSize) { |
| emitPrologueEpilogueSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -ArgRegsSaveSize, |
| ARM::NoRegister, MachineInstr::FrameSetup); |
| CFAOffset += ArgRegsSaveSize; |
| unsigned CFIIndex = |
| MF.addFrameInst(MCCFIInstruction::cfiDefCfaOffset(nullptr, CFAOffset)); |
| BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) |
| .addCFIIndex(CFIIndex) |
| .setMIFlags(MachineInstr::FrameSetup); |
| } |
| |
| if (!AFI->hasStackFrame()) { |
| if (NumBytes - ArgRegsSaveSize != 0) { |
| emitPrologueEpilogueSPUpdate(MBB, MBBI, TII, dl, *RegInfo, |
| -(NumBytes - ArgRegsSaveSize), |
| ARM::NoRegister, MachineInstr::FrameSetup); |
| CFAOffset += NumBytes - ArgRegsSaveSize; |
| unsigned CFIIndex = MF.addFrameInst( |
| MCCFIInstruction::cfiDefCfaOffset(nullptr, CFAOffset)); |
| BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) |
| .addCFIIndex(CFIIndex) |
| .setMIFlags(MachineInstr::FrameSetup); |
| } |
| return; |
| } |
| |
| for (unsigned i = 0, e = CSI.size(); i != e; ++i) { |
| unsigned Reg = CSI[i].getReg(); |
| int FI = CSI[i].getFrameIdx(); |
| switch (Reg) { |
| case ARM::R8: |
| case ARM::R9: |
| case ARM::R10: |
| case ARM::R11: |
| if (STI.splitFramePushPop(MF)) { |
| GPRCS2Size += 4; |
| break; |
| } |
| LLVM_FALLTHROUGH; |
| case ARM::R4: |
| case ARM::R5: |
| case ARM::R6: |
| case ARM::R7: |
| case ARM::LR: |
| if (Reg == FramePtr) |
| FramePtrSpillFI = FI; |
| GPRCS1Size += 4; |
| break; |
| default: |
| DPRCSSize += 8; |
| } |
| } |
| |
| if (MBBI != MBB.end() && MBBI->getOpcode() == ARM::tPUSH) { |
| ++MBBI; |
| } |
| |
| // Determine starting offsets of spill areas. |
| unsigned DPRCSOffset = NumBytes - ArgRegsSaveSize - (GPRCS1Size + GPRCS2Size + DPRCSSize); |
| unsigned GPRCS2Offset = DPRCSOffset + DPRCSSize; |
| unsigned GPRCS1Offset = GPRCS2Offset + GPRCS2Size; |
| bool HasFP = hasFP(MF); |
| if (HasFP) |
| AFI->setFramePtrSpillOffset(MFI.getObjectOffset(FramePtrSpillFI) + |
| NumBytes); |
| AFI->setGPRCalleeSavedArea1Offset(GPRCS1Offset); |
| AFI->setGPRCalleeSavedArea2Offset(GPRCS2Offset); |
| AFI->setDPRCalleeSavedAreaOffset(DPRCSOffset); |
| NumBytes = DPRCSOffset; |
| |
| int FramePtrOffsetInBlock = 0; |
| unsigned adjustedGPRCS1Size = GPRCS1Size; |
| if (GPRCS1Size > 0 && GPRCS2Size == 0 && |
| tryFoldSPUpdateIntoPushPop(STI, MF, &*std::prev(MBBI), NumBytes)) { |
| FramePtrOffsetInBlock = NumBytes; |
| adjustedGPRCS1Size += NumBytes; |
| NumBytes = 0; |
| } |
| |
| if (adjustedGPRCS1Size) { |
| CFAOffset += adjustedGPRCS1Size; |
| unsigned CFIIndex = |
| MF.addFrameInst(MCCFIInstruction::cfiDefCfaOffset(nullptr, CFAOffset)); |
| BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) |
| .addCFIIndex(CFIIndex) |
| .setMIFlags(MachineInstr::FrameSetup); |
| } |
| for (std::vector<CalleeSavedInfo>::const_iterator I = CSI.begin(), |
| E = CSI.end(); I != E; ++I) { |
| unsigned Reg = I->getReg(); |
| int FI = I->getFrameIdx(); |
| switch (Reg) { |
| case ARM::R8: |
| case ARM::R9: |
| case ARM::R10: |
| case ARM::R11: |
| case ARM::R12: |
| if (STI.splitFramePushPop(MF)) |
| break; |
| LLVM_FALLTHROUGH; |
| case ARM::R0: |
| case ARM::R1: |
| case ARM::R2: |
| case ARM::R3: |
| case ARM::R4: |
| case ARM::R5: |
| case ARM::R6: |
| case ARM::R7: |
| case ARM::LR: |
| unsigned CFIIndex = MF.addFrameInst(MCCFIInstruction::createOffset( |
| nullptr, MRI->getDwarfRegNum(Reg, true), MFI.getObjectOffset(FI))); |
| BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) |
| .addCFIIndex(CFIIndex) |
| .setMIFlags(MachineInstr::FrameSetup); |
| break; |
| } |
| } |
| |
| // Adjust FP so it point to the stack slot that contains the previous FP. |
| if (HasFP) { |
| FramePtrOffsetInBlock += |
| MFI.getObjectOffset(FramePtrSpillFI) + GPRCS1Size + ArgRegsSaveSize; |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::tADDrSPi), FramePtr) |
| .addReg(ARM::SP) |
| .addImm(FramePtrOffsetInBlock / 4) |
| .setMIFlags(MachineInstr::FrameSetup) |
| .add(predOps(ARMCC::AL)); |
| if(FramePtrOffsetInBlock) { |
| CFAOffset -= FramePtrOffsetInBlock; |
| unsigned CFIIndex = MF.addFrameInst(MCCFIInstruction::cfiDefCfa( |
| nullptr, MRI->getDwarfRegNum(FramePtr, true), CFAOffset)); |
| BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) |
| .addCFIIndex(CFIIndex) |
| .setMIFlags(MachineInstr::FrameSetup); |
| } else { |
| unsigned CFIIndex = |
| MF.addFrameInst(MCCFIInstruction::createDefCfaRegister( |
| nullptr, MRI->getDwarfRegNum(FramePtr, true))); |
| BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) |
| .addCFIIndex(CFIIndex) |
| .setMIFlags(MachineInstr::FrameSetup); |
| } |
| if (NumBytes > 508) |
| // If offset is > 508 then sp cannot be adjusted in a single instruction, |
| // try restoring from fp instead. |
| AFI->setShouldRestoreSPFromFP(true); |
| } |
| |
| // Skip past the spilling of r8-r11, which could consist of multiple tPUSH |
| // and tMOVr instructions. We don't need to add any call frame information |
| // in-between these instructions, because they do not modify the high |
| // registers. |
| while (true) { |
| MachineBasicBlock::iterator OldMBBI = MBBI; |
| // Skip a run of tMOVr instructions |
| while (MBBI != MBB.end() && MBBI->getOpcode() == ARM::tMOVr) |
| MBBI++; |
| if (MBBI != MBB.end() && MBBI->getOpcode() == ARM::tPUSH) { |
| MBBI++; |
| } else { |
| // We have reached an instruction which is not a push, so the previous |
| // run of tMOVr instructions (which may have been empty) was not part of |
| // the prologue. Reset MBBI back to the last PUSH of the prologue. |
| MBBI = OldMBBI; |
| break; |
| } |
| } |
| |
| // Emit call frame information for the callee-saved high registers. |
| for (auto &I : CSI) { |
| unsigned Reg = I.getReg(); |
| int FI = I.getFrameIdx(); |
| switch (Reg) { |
| case ARM::R8: |
| case ARM::R9: |
| case ARM::R10: |
| case ARM::R11: |
| case ARM::R12: { |
| unsigned CFIIndex = MF.addFrameInst(MCCFIInstruction::createOffset( |
| nullptr, MRI->getDwarfRegNum(Reg, true), MFI.getObjectOffset(FI))); |
| BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) |
| .addCFIIndex(CFIIndex) |
| .setMIFlags(MachineInstr::FrameSetup); |
| break; |
| } |
| default: |
| break; |
| } |
| } |
| |
| if (NumBytes) { |
| // Insert it after all the callee-save spills. |
| // |
| // For a large stack frame, we might need a scratch register to store |
| // the size of the frame. We know all callee-save registers are free |
| // at this point in the prologue, so pick one. |
| unsigned ScratchRegister = ARM::NoRegister; |
| for (auto &I : CSI) { |
| unsigned Reg = I.getReg(); |
| if (isARMLowRegister(Reg) && !(HasFP && Reg == FramePtr)) { |
| ScratchRegister = Reg; |
| break; |
| } |
| } |
| emitPrologueEpilogueSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -NumBytes, |
| ScratchRegister, MachineInstr::FrameSetup); |
| if (!HasFP) { |
| CFAOffset += NumBytes; |
| unsigned CFIIndex = MF.addFrameInst( |
| MCCFIInstruction::cfiDefCfaOffset(nullptr, CFAOffset)); |
| BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) |
| .addCFIIndex(CFIIndex) |
| .setMIFlags(MachineInstr::FrameSetup); |
| } |
| } |
| |
| if (STI.isTargetELF() && HasFP) |
| MFI.setOffsetAdjustment(MFI.getOffsetAdjustment() - |
| AFI->getFramePtrSpillOffset()); |
| |
| AFI->setGPRCalleeSavedArea1Size(GPRCS1Size); |
| AFI->setGPRCalleeSavedArea2Size(GPRCS2Size); |
| AFI->setDPRCalleeSavedAreaSize(DPRCSSize); |
| |
| if (RegInfo->needsStackRealignment(MF)) { |
| const unsigned NrBitsToZero = Log2(MFI.getMaxAlign()); |
| // Emit the following sequence, using R4 as a temporary, since we cannot use |
| // SP as a source or destination register for the shifts: |
| // mov r4, sp |
| // lsrs r4, r4, #NrBitsToZero |
| // lsls r4, r4, #NrBitsToZero |
| // mov sp, r4 |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), ARM::R4) |
| .addReg(ARM::SP, RegState::Kill) |
| .add(predOps(ARMCC::AL)); |
| |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::tLSRri), ARM::R4) |
| .addDef(ARM::CPSR) |
| .addReg(ARM::R4, RegState::Kill) |
| .addImm(NrBitsToZero) |
| .add(predOps(ARMCC::AL)); |
| |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::tLSLri), ARM::R4) |
| .addDef(ARM::CPSR) |
| .addReg(ARM::R4, RegState::Kill) |
| .addImm(NrBitsToZero) |
| .add(predOps(ARMCC::AL)); |
| |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), ARM::SP) |
| .addReg(ARM::R4, RegState::Kill) |
| .add(predOps(ARMCC::AL)); |
| |
| AFI->setShouldRestoreSPFromFP(true); |
| } |
| |
| // If we need a base pointer, set it up here. It's whatever the value |
| // of the stack pointer is at this point. Any variable size objects |
| // will be allocated after this, so we can still use the base pointer |
| // to reference locals. |
| if (RegInfo->hasBasePointer(MF)) |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), BasePtr) |
| .addReg(ARM::SP) |
| .add(predOps(ARMCC::AL)); |
| |
| // If the frame has variable sized objects then the epilogue must restore |
| // the sp from fp. We can assume there's an FP here since hasFP already |
| // checks for hasVarSizedObjects. |
| if (MFI.hasVarSizedObjects()) |
| AFI->setShouldRestoreSPFromFP(true); |
| |
| // In some cases, virtual registers have been introduced, e.g. by uses of |
| // emitThumbRegPlusImmInReg. |
| MF.getProperties().reset(MachineFunctionProperties::Property::NoVRegs); |
| } |
| |
| static bool isCSRestore(MachineInstr &MI, const MCPhysReg *CSRegs) { |
| if (MI.getOpcode() == ARM::tLDRspi && MI.getOperand(1).isFI() && |
| isCalleeSavedRegister(MI.getOperand(0).getReg(), CSRegs)) |
| return true; |
| else if (MI.getOpcode() == ARM::tPOP) { |
| return true; |
| } else if (MI.getOpcode() == ARM::tMOVr) { |
| Register Dst = MI.getOperand(0).getReg(); |
| Register Src = MI.getOperand(1).getReg(); |
| return ((ARM::tGPRRegClass.contains(Src) || Src == ARM::LR) && |
| ARM::hGPRRegClass.contains(Dst)); |
| } |
| return false; |
| } |
| |
| void Thumb1FrameLowering::emitEpilogue(MachineFunction &MF, |
| MachineBasicBlock &MBB) const { |
| MachineBasicBlock::iterator MBBI = MBB.getFirstTerminator(); |
| DebugLoc dl = MBBI != MBB.end() ? MBBI->getDebugLoc() : DebugLoc(); |
| MachineFrameInfo &MFI = MF.getFrameInfo(); |
| ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>(); |
| const ThumbRegisterInfo *RegInfo = |
| static_cast<const ThumbRegisterInfo *>(STI.getRegisterInfo()); |
| const Thumb1InstrInfo &TII = |
| *static_cast<const Thumb1InstrInfo *>(STI.getInstrInfo()); |
| |
| unsigned ArgRegsSaveSize = AFI->getArgRegsSaveSize(); |
| int NumBytes = (int)MFI.getStackSize(); |
| assert((unsigned)NumBytes >= ArgRegsSaveSize && |
| "ArgRegsSaveSize is included in NumBytes"); |
| const MCPhysReg *CSRegs = RegInfo->getCalleeSavedRegs(&MF); |
| Register FramePtr = RegInfo->getFrameRegister(MF); |
| |
| if (!AFI->hasStackFrame()) { |
| if (NumBytes - ArgRegsSaveSize != 0) |
| emitPrologueEpilogueSPUpdate(MBB, MBBI, TII, dl, *RegInfo, |
| NumBytes - ArgRegsSaveSize, ARM::NoRegister, |
| MachineInstr::NoFlags); |
| } else { |
| // Unwind MBBI to point to first LDR / VLDRD. |
| if (MBBI != MBB.begin()) { |
| do |
| --MBBI; |
| while (MBBI != MBB.begin() && isCSRestore(*MBBI, CSRegs)); |
| if (!isCSRestore(*MBBI, CSRegs)) |
| ++MBBI; |
| } |
| |
| // Move SP to start of FP callee save spill area. |
| NumBytes -= (AFI->getGPRCalleeSavedArea1Size() + |
| AFI->getGPRCalleeSavedArea2Size() + |
| AFI->getDPRCalleeSavedAreaSize() + |
| ArgRegsSaveSize); |
| |
| if (AFI->shouldRestoreSPFromFP()) { |
| NumBytes = AFI->getFramePtrSpillOffset() - NumBytes; |
| // Reset SP based on frame pointer only if the stack frame extends beyond |
| // frame pointer stack slot, the target is ELF and the function has FP, or |
| // the target uses var sized objects. |
| if (NumBytes) { |
| assert(!MFI.getPristineRegs(MF).test(ARM::R4) && |
| "No scratch register to restore SP from FP!"); |
| emitThumbRegPlusImmediate(MBB, MBBI, dl, ARM::R4, FramePtr, -NumBytes, |
| TII, *RegInfo); |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), ARM::SP) |
| .addReg(ARM::R4) |
| .add(predOps(ARMCC::AL)); |
| } else |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), ARM::SP) |
| .addReg(FramePtr) |
| .add(predOps(ARMCC::AL)); |
| } else { |
| // For a large stack frame, we might need a scratch register to store |
| // the size of the frame. We know all callee-save registers are free |
| // at this point in the epilogue, so pick one. |
| unsigned ScratchRegister = ARM::NoRegister; |
| bool HasFP = hasFP(MF); |
| for (auto &I : MFI.getCalleeSavedInfo()) { |
| unsigned Reg = I.getReg(); |
| if (isARMLowRegister(Reg) && !(HasFP && Reg == FramePtr)) { |
| ScratchRegister = Reg; |
| break; |
| } |
| } |
| if (MBBI != MBB.end() && MBBI->getOpcode() == ARM::tBX_RET && |
| &MBB.front() != &*MBBI && std::prev(MBBI)->getOpcode() == ARM::tPOP) { |
| MachineBasicBlock::iterator PMBBI = std::prev(MBBI); |
| if (!tryFoldSPUpdateIntoPushPop(STI, MF, &*PMBBI, NumBytes)) |
| emitPrologueEpilogueSPUpdate(MBB, PMBBI, TII, dl, *RegInfo, NumBytes, |
| ScratchRegister, MachineInstr::NoFlags); |
| } else if (!tryFoldSPUpdateIntoPushPop(STI, MF, &*MBBI, NumBytes)) |
| emitPrologueEpilogueSPUpdate(MBB, MBBI, TII, dl, *RegInfo, NumBytes, |
| ScratchRegister, MachineInstr::NoFlags); |
| } |
| } |
| |
| if (needPopSpecialFixUp(MF)) { |
| bool Done = emitPopSpecialFixUp(MBB, /* DoIt */ true); |
| (void)Done; |
| assert(Done && "Emission of the special fixup failed!?"); |
| } |
| } |
| |
| bool Thumb1FrameLowering::canUseAsEpilogue(const MachineBasicBlock &MBB) const { |
| if (!needPopSpecialFixUp(*MBB.getParent())) |
| return true; |
| |
| MachineBasicBlock *TmpMBB = const_cast<MachineBasicBlock *>(&MBB); |
| return emitPopSpecialFixUp(*TmpMBB, /* DoIt */ false); |
| } |
| |
| bool Thumb1FrameLowering::needPopSpecialFixUp(const MachineFunction &MF) const { |
| ARMFunctionInfo *AFI = |
| const_cast<MachineFunction *>(&MF)->getInfo<ARMFunctionInfo>(); |
| if (AFI->getArgRegsSaveSize()) |
| return true; |
| |
| // LR cannot be encoded with Thumb1, i.e., it requires a special fix-up. |
| for (const CalleeSavedInfo &CSI : MF.getFrameInfo().getCalleeSavedInfo()) |
| if (CSI.getReg() == ARM::LR) |
| return true; |
| |
| return false; |
| } |
| |
| static void findTemporariesForLR(const BitVector &GPRsNoLRSP, |
| const BitVector &PopFriendly, |
| const LivePhysRegs &UsedRegs, unsigned &PopReg, |
| unsigned &TmpReg) { |
| PopReg = TmpReg = 0; |
| for (auto Reg : GPRsNoLRSP.set_bits()) { |
| if (!UsedRegs.contains(Reg)) { |
| // Remember the first pop-friendly register and exit. |
| if (PopFriendly.test(Reg)) { |
| PopReg = Reg; |
| TmpReg = 0; |
| break; |
| } |
| // Otherwise, remember that the register will be available to |
| // save a pop-friendly register. |
| TmpReg = Reg; |
| } |
| } |
| } |
| |
| bool Thumb1FrameLowering::emitPopSpecialFixUp(MachineBasicBlock &MBB, |
| bool DoIt) const { |
| MachineFunction &MF = *MBB.getParent(); |
| ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>(); |
| unsigned ArgRegsSaveSize = AFI->getArgRegsSaveSize(); |
| const TargetInstrInfo &TII = *STI.getInstrInfo(); |
| const ThumbRegisterInfo *RegInfo = |
| static_cast<const ThumbRegisterInfo *>(STI.getRegisterInfo()); |
| |
| // If MBBI is a return instruction, or is a tPOP followed by a return |
| // instruction in the successor BB, we may be able to directly restore |
| // LR in the PC. |
| // This is only possible with v5T ops (v4T can't change the Thumb bit via |
| // a POP PC instruction), and only if we do not need to emit any SP update. |
| // Otherwise, we need a temporary register to pop the value |
| // and copy that value into LR. |
| auto MBBI = MBB.getFirstTerminator(); |
| bool CanRestoreDirectly = STI.hasV5TOps() && !ArgRegsSaveSize; |
| if (CanRestoreDirectly) { |
| if (MBBI != MBB.end() && MBBI->getOpcode() != ARM::tB) |
| CanRestoreDirectly = (MBBI->getOpcode() == ARM::tBX_RET || |
| MBBI->getOpcode() == ARM::tPOP_RET); |
| else { |
| auto MBBI_prev = MBBI; |
| MBBI_prev--; |
| assert(MBBI_prev->getOpcode() == ARM::tPOP); |
| assert(MBB.succ_size() == 1); |
| if ((*MBB.succ_begin())->begin()->getOpcode() == ARM::tBX_RET) |
| MBBI = MBBI_prev; // Replace the final tPOP with a tPOP_RET. |
| else |
| CanRestoreDirectly = false; |
| } |
| } |
| |
| if (CanRestoreDirectly) { |
| if (!DoIt || MBBI->getOpcode() == ARM::tPOP_RET) |
| return true; |
| MachineInstrBuilder MIB = |
| BuildMI(MBB, MBBI, MBBI->getDebugLoc(), TII.get(ARM::tPOP_RET)) |
| .add(predOps(ARMCC::AL)); |
| // Copy implicit ops and popped registers, if any. |
| for (auto MO: MBBI->operands()) |
| if (MO.isReg() && (MO.isImplicit() || MO.isDef())) |
| MIB.add(MO); |
| MIB.addReg(ARM::PC, RegState::Define); |
| // Erase the old instruction (tBX_RET or tPOP). |
| MBB.erase(MBBI); |
| return true; |
| } |
| |
| // Look for a temporary register to use. |
| // First, compute the liveness information. |
| const TargetRegisterInfo &TRI = *STI.getRegisterInfo(); |
| LivePhysRegs UsedRegs(TRI); |
| UsedRegs.addLiveOuts(MBB); |
| // The semantic of pristines changed recently and now, |
| // the callee-saved registers that are touched in the function |
| // are not part of the pristines set anymore. |
| // Add those callee-saved now. |
| const MCPhysReg *CSRegs = TRI.getCalleeSavedRegs(&MF); |
| for (unsigned i = 0; CSRegs[i]; ++i) |
| UsedRegs.addReg(CSRegs[i]); |
| |
| DebugLoc dl = DebugLoc(); |
| if (MBBI != MBB.end()) { |
| dl = MBBI->getDebugLoc(); |
| auto InstUpToMBBI = MBB.end(); |
| while (InstUpToMBBI != MBBI) |
| // The pre-decrement is on purpose here. |
| // We want to have the liveness right before MBBI. |
| UsedRegs.stepBackward(*--InstUpToMBBI); |
| } |
| |
| // Look for a register that can be directly use in the POP. |
| unsigned PopReg = 0; |
| // And some temporary register, just in case. |
| unsigned TemporaryReg = 0; |
| BitVector PopFriendly = |
| TRI.getAllocatableSet(MF, TRI.getRegClass(ARM::tGPRRegClassID)); |
| // R7 may be used as a frame pointer, hence marked as not generally |
| // allocatable, however there's no reason to not use it as a temporary for |
| // restoring LR. |
| if (STI.useR7AsFramePointer()) |
| PopFriendly.set(ARM::R7); |
| |
| assert(PopFriendly.any() && "No allocatable pop-friendly register?!"); |
| // Rebuild the GPRs from the high registers because they are removed |
| // form the GPR reg class for thumb1. |
| BitVector GPRsNoLRSP = |
| TRI.getAllocatableSet(MF, TRI.getRegClass(ARM::hGPRRegClassID)); |
| GPRsNoLRSP |= PopFriendly; |
| GPRsNoLRSP.reset(ARM::LR); |
| GPRsNoLRSP.reset(ARM::SP); |
| GPRsNoLRSP.reset(ARM::PC); |
| findTemporariesForLR(GPRsNoLRSP, PopFriendly, UsedRegs, PopReg, TemporaryReg); |
| |
| // If we couldn't find a pop-friendly register, try restoring LR before |
| // popping the other callee-saved registers, so we could use one of them as a |
| // temporary. |
| bool UseLDRSP = false; |
| if (!PopReg && MBBI != MBB.begin()) { |
| auto PrevMBBI = MBBI; |
| PrevMBBI--; |
| if (PrevMBBI->getOpcode() == ARM::tPOP) { |
| UsedRegs.stepBackward(*PrevMBBI); |
| findTemporariesForLR(GPRsNoLRSP, PopFriendly, UsedRegs, PopReg, TemporaryReg); |
| if (PopReg) { |
| MBBI = PrevMBBI; |
| UseLDRSP = true; |
| } |
| } |
| } |
| |
| if (!DoIt && !PopReg && !TemporaryReg) |
| return false; |
| |
| assert((PopReg || TemporaryReg) && "Cannot get LR"); |
| |
| if (UseLDRSP) { |
| assert(PopReg && "Do not know how to get LR"); |
| // Load the LR via LDR tmp, [SP, #off] |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::tLDRspi)) |
| .addReg(PopReg, RegState::Define) |
| .addReg(ARM::SP) |
| .addImm(MBBI->getNumExplicitOperands() - 2) |
| .add(predOps(ARMCC::AL)); |
| // Move from the temporary register to the LR. |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr)) |
| .addReg(ARM::LR, RegState::Define) |
| .addReg(PopReg, RegState::Kill) |
| .add(predOps(ARMCC::AL)); |
| // Advance past the pop instruction. |
| MBBI++; |
| // Increment the SP. |
| emitPrologueEpilogueSPUpdate(MBB, MBBI, TII, dl, *RegInfo, |
| ArgRegsSaveSize + 4, ARM::NoRegister, |
| MachineInstr::NoFlags); |
| return true; |
| } |
| |
| if (TemporaryReg) { |
| assert(!PopReg && "Unnecessary MOV is about to be inserted"); |
| PopReg = PopFriendly.find_first(); |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr)) |
| .addReg(TemporaryReg, RegState::Define) |
| .addReg(PopReg, RegState::Kill) |
| .add(predOps(ARMCC::AL)); |
| } |
| |
| if (MBBI != MBB.end() && MBBI->getOpcode() == ARM::tPOP_RET) { |
| // We couldn't use the direct restoration above, so |
| // perform the opposite conversion: tPOP_RET to tPOP. |
| MachineInstrBuilder MIB = |
| BuildMI(MBB, MBBI, MBBI->getDebugLoc(), TII.get(ARM::tPOP)) |
| .add(predOps(ARMCC::AL)); |
| bool Popped = false; |
| for (auto MO: MBBI->operands()) |
| if (MO.isReg() && (MO.isImplicit() || MO.isDef()) && |
| MO.getReg() != ARM::PC) { |
| MIB.add(MO); |
| if (!MO.isImplicit()) |
| Popped = true; |
| } |
| // Is there anything left to pop? |
| if (!Popped) |
| MBB.erase(MIB.getInstr()); |
| // Erase the old instruction. |
| MBB.erase(MBBI); |
| MBBI = BuildMI(MBB, MBB.end(), dl, TII.get(ARM::tBX_RET)) |
| .add(predOps(ARMCC::AL)); |
| } |
| |
| assert(PopReg && "Do not know how to get LR"); |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::tPOP)) |
| .add(predOps(ARMCC::AL)) |
| .addReg(PopReg, RegState::Define); |
| |
| emitPrologueEpilogueSPUpdate(MBB, MBBI, TII, dl, *RegInfo, ArgRegsSaveSize, |
| ARM::NoRegister, MachineInstr::NoFlags); |
| |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr)) |
| .addReg(ARM::LR, RegState::Define) |
| .addReg(PopReg, RegState::Kill) |
| .add(predOps(ARMCC::AL)); |
| |
| if (TemporaryReg) |
| BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr)) |
| .addReg(PopReg, RegState::Define) |
| .addReg(TemporaryReg, RegState::Kill) |
| .add(predOps(ARMCC::AL)); |
| |
| return true; |
| } |
| |
| using ARMRegSet = std::bitset<ARM::NUM_TARGET_REGS>; |
| |
| // Return the first iteraror after CurrentReg which is present in EnabledRegs, |
| // or OrderEnd if no further registers are in that set. This does not advance |
| // the iterator fiorst, so returns CurrentReg if it is in EnabledRegs. |
| static const unsigned *findNextOrderedReg(const unsigned *CurrentReg, |
| const ARMRegSet &EnabledRegs, |
| const unsigned *OrderEnd) { |
| while (CurrentReg != OrderEnd && !EnabledRegs[*CurrentReg]) |
| ++CurrentReg; |
| return CurrentReg; |
| } |
| |
| bool Thumb1FrameLowering::spillCalleeSavedRegisters( |
| MachineBasicBlock &MBB, MachineBasicBlock::iterator MI, |
| ArrayRef<CalleeSavedInfo> CSI, const TargetRegisterInfo *TRI) const { |
| if (CSI.empty()) |
| return false; |
| |
| DebugLoc DL; |
| const TargetInstrInfo &TII = *STI.getInstrInfo(); |
| MachineFunction &MF = *MBB.getParent(); |
| const ARMBaseRegisterInfo *RegInfo = static_cast<const ARMBaseRegisterInfo *>( |
| MF.getSubtarget().getRegisterInfo()); |
| |
| ARMRegSet LoRegsToSave; // r0-r7, lr |
| ARMRegSet HiRegsToSave; // r8-r11 |
| ARMRegSet CopyRegs; // Registers which can be used after pushing |
| // LoRegs for saving HiRegs. |
| |
| for (unsigned i = CSI.size(); i != 0; --i) { |
| unsigned Reg = CSI[i-1].getReg(); |
| |
| if (ARM::tGPRRegClass.contains(Reg) || Reg == ARM::LR) { |
| LoRegsToSave[Reg] = true; |
| } else if (ARM::hGPRRegClass.contains(Reg) && Reg != ARM::LR) { |
| HiRegsToSave[Reg] = true; |
| } else { |
| llvm_unreachable("callee-saved register of unexpected class"); |
| } |
| |
| if ((ARM::tGPRRegClass.contains(Reg) || Reg == ARM::LR) && |
| !MF.getRegInfo().isLiveIn(Reg) && |
| !(hasFP(MF) && Reg == RegInfo->getFrameRegister(MF))) |
| CopyRegs[Reg] = true; |
| } |
| |
| // Unused argument registers can be used for the high register saving. |
| for (unsigned ArgReg : {ARM::R0, ARM::R1, ARM::R2, ARM::R3}) |
| if (!MF.getRegInfo().isLiveIn(ArgReg)) |
| CopyRegs[ArgReg] = true; |
| |
| // Push the low registers and lr |
| const MachineRegisterInfo &MRI = MF.getRegInfo(); |
| if (!LoRegsToSave.none()) { |
| MachineInstrBuilder MIB = |
| BuildMI(MBB, MI, DL, TII.get(ARM::tPUSH)).add(predOps(ARMCC::AL)); |
| for (unsigned Reg : {ARM::R4, ARM::R5, ARM::R6, ARM::R7, ARM::LR}) { |
| if (LoRegsToSave[Reg]) { |
| bool isKill = !MRI.isLiveIn(Reg); |
| if (isKill && !MRI.isReserved(Reg)) |
| MBB.addLiveIn(Reg); |
| |
| MIB.addReg(Reg, getKillRegState(isKill)); |
| } |
| } |
| MIB.setMIFlags(MachineInstr::FrameSetup); |
| } |
| |
| // Push the high registers. There are no store instructions that can access |
| // these registers directly, so we have to move them to low registers, and |
| // push them. This might take multiple pushes, as it is possible for there to |
| // be fewer low registers available than high registers which need saving. |
| |
| // These are in reverse order so that in the case where we need to use |
| // multiple PUSH instructions, the order of the registers on the stack still |
| // matches the unwind info. They need to be swicthed back to ascending order |
| // before adding to the PUSH instruction. |
| static const unsigned AllCopyRegs[] = {ARM::LR, ARM::R7, ARM::R6, |
| ARM::R5, ARM::R4, ARM::R3, |
| ARM::R2, ARM::R1, ARM::R0}; |
| static const unsigned AllHighRegs[] = {ARM::R11, ARM::R10, ARM::R9, ARM::R8}; |
| |
| const unsigned *AllCopyRegsEnd = std::end(AllCopyRegs); |
| const unsigned *AllHighRegsEnd = std::end(AllHighRegs); |
| |
| // Find the first register to save. |
| const unsigned *HiRegToSave = findNextOrderedReg( |
| std::begin(AllHighRegs), HiRegsToSave, AllHighRegsEnd); |
| |
| while (HiRegToSave != AllHighRegsEnd) { |
| // Find the first low register to use. |
| const unsigned *CopyReg = |
| findNextOrderedReg(std::begin(AllCopyRegs), CopyRegs, AllCopyRegsEnd); |
| |
| // Create the PUSH, but don't insert it yet (the MOVs need to come first). |
| MachineInstrBuilder PushMIB = BuildMI(MF, DL, TII.get(ARM::tPUSH)) |
| .add(predOps(ARMCC::AL)) |
| .setMIFlags(MachineInstr::FrameSetup); |
| |
| SmallVector<unsigned, 4> RegsToPush; |
| while (HiRegToSave != AllHighRegsEnd && CopyReg != AllCopyRegsEnd) { |
| if (HiRegsToSave[*HiRegToSave]) { |
| bool isKill = !MRI.isLiveIn(*HiRegToSave); |
| if (isKill && !MRI.isReserved(*HiRegToSave)) |
| MBB.addLiveIn(*HiRegToSave); |
| |
| // Emit a MOV from the high reg to the low reg. |
| BuildMI(MBB, MI, DL, TII.get(ARM::tMOVr)) |
| .addReg(*CopyReg, RegState::Define) |
| .addReg(*HiRegToSave, getKillRegState(isKill)) |
| .add(predOps(ARMCC::AL)) |
| .setMIFlags(MachineInstr::FrameSetup); |
| |
| // Record the register that must be added to the PUSH. |
| RegsToPush.push_back(*CopyReg); |
| |
| CopyReg = findNextOrderedReg(++CopyReg, CopyRegs, AllCopyRegsEnd); |
| HiRegToSave = |
| findNextOrderedReg(++HiRegToSave, HiRegsToSave, AllHighRegsEnd); |
| } |
| } |
| |
| // Add the low registers to the PUSH, in ascending order. |
| for (unsigned Reg : llvm::reverse(RegsToPush)) |
| PushMIB.addReg(Reg, RegState::Kill); |
| |
| // Insert the PUSH instruction after the MOVs. |
| MBB.insert(MI, PushMIB); |
| } |
| |
| return true; |
| } |
| |
| bool Thumb1FrameLowering::restoreCalleeSavedRegisters( |
| MachineBasicBlock &MBB, MachineBasicBlock::iterator MI, |
| MutableArrayRef<CalleeSavedInfo> CSI, const TargetRegisterInfo *TRI) const { |
| if (CSI.empty()) |
| return false; |
| |
| MachineFunction &MF = *MBB.getParent(); |
| ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>(); |
| const TargetInstrInfo &TII = *STI.getInstrInfo(); |
| const ARMBaseRegisterInfo *RegInfo = static_cast<const ARMBaseRegisterInfo *>( |
| MF.getSubtarget().getRegisterInfo()); |
| |
| bool isVarArg = AFI->getArgRegsSaveSize() > 0; |
| DebugLoc DL = MI != MBB.end() ? MI->getDebugLoc() : DebugLoc(); |
| |
| ARMRegSet LoRegsToRestore; |
| ARMRegSet HiRegsToRestore; |
| // Low registers (r0-r7) which can be used to restore the high registers. |
| ARMRegSet CopyRegs; |
| |
| for (CalleeSavedInfo I : CSI) { |
| unsigned Reg = I.getReg(); |
| |
| if (ARM::tGPRRegClass.contains(Reg) || Reg == ARM::LR) { |
| LoRegsToRestore[Reg] = true; |
| } else if (ARM::hGPRRegClass.contains(Reg) && Reg != ARM::LR) { |
| HiRegsToRestore[Reg] = true; |
| } else { |
| llvm_unreachable("callee-saved register of unexpected class"); |
| } |
| |
| // If this is a low register not used as the frame pointer, we may want to |
| // use it for restoring the high registers. |
| if ((ARM::tGPRRegClass.contains(Reg)) && |
| !(hasFP(MF) && Reg == RegInfo->getFrameRegister(MF))) |
| CopyRegs[Reg] = true; |
| } |
| |
| // If this is a return block, we may be able to use some unused return value |
| // registers for restoring the high regs. |
| auto Terminator = MBB.getFirstTerminator(); |
| if (Terminator != MBB.end() && Terminator->getOpcode() == ARM::tBX_RET) { |
| CopyRegs[ARM::R0] = true; |
| CopyRegs[ARM::R1] = true; |
| CopyRegs[ARM::R2] = true; |
| CopyRegs[ARM::R3] = true; |
| for (auto Op : Terminator->implicit_operands()) { |
| if (Op.isReg()) |
| CopyRegs[Op.getReg()] = false; |
| } |
| } |
| |
| static const unsigned AllCopyRegs[] = {ARM::R0, ARM::R1, ARM::R2, ARM::R3, |
| ARM::R4, ARM::R5, ARM::R6, ARM::R7}; |
| static const unsigned AllHighRegs[] = {ARM::R8, ARM::R9, ARM::R10, ARM::R11}; |
| |
| const unsigned *AllCopyRegsEnd = std::end(AllCopyRegs); |
| const unsigned *AllHighRegsEnd = std::end(AllHighRegs); |
| |
| // Find the first register to restore. |
| auto HiRegToRestore = findNextOrderedReg(std::begin(AllHighRegs), |
| HiRegsToRestore, AllHighRegsEnd); |
| |
| while (HiRegToRestore != AllHighRegsEnd) { |
| assert(!CopyRegs.none()); |
| // Find the first low register to use. |
| auto CopyReg = |
| findNextOrderedReg(std::begin(AllCopyRegs), CopyRegs, AllCopyRegsEnd); |
| |
| // Create the POP instruction. |
| MachineInstrBuilder PopMIB = |
| BuildMI(MBB, MI, DL, TII.get(ARM::tPOP)).add(predOps(ARMCC::AL)); |
| |
| while (HiRegToRestore != AllHighRegsEnd && CopyReg != AllCopyRegsEnd) { |
| // Add the low register to the POP. |
| PopMIB.addReg(*CopyReg, RegState::Define); |
| |
| // Create the MOV from low to high register. |
| BuildMI(MBB, MI, DL, TII.get(ARM::tMOVr)) |
| .addReg(*HiRegToRestore, RegState::Define) |
| .addReg(*CopyReg, RegState::Kill) |
| .add(predOps(ARMCC::AL)); |
| |
| CopyReg = findNextOrderedReg(++CopyReg, CopyRegs, AllCopyRegsEnd); |
| HiRegToRestore = |
| findNextOrderedReg(++HiRegToRestore, HiRegsToRestore, AllHighRegsEnd); |
| } |
| } |
| |
| MachineInstrBuilder MIB = |
| BuildMI(MF, DL, TII.get(ARM::tPOP)).add(predOps(ARMCC::AL)); |
| |
| bool NeedsPop = false; |
| for (unsigned i = CSI.size(); i != 0; --i) { |
| CalleeSavedInfo &Info = CSI[i-1]; |
| unsigned Reg = Info.getReg(); |
| |
| // High registers (excluding lr) have already been dealt with |
| if (!(ARM::tGPRRegClass.contains(Reg) || Reg == ARM::LR)) |
| continue; |
| |
| if (Reg == ARM::LR) { |
| Info.setRestored(false); |
| if (!MBB.succ_empty() || |
| MI->getOpcode() == ARM::TCRETURNdi || |
| MI->getOpcode() == ARM::TCRETURNri) |
| // LR may only be popped into PC, as part of return sequence. |
| // If this isn't the return sequence, we'll need emitPopSpecialFixUp |
| // to restore LR the hard way. |
| // FIXME: if we don't pass any stack arguments it would be actually |
| // advantageous *and* correct to do the conversion to an ordinary call |
| // instruction here. |
| continue; |
| // Special epilogue for vararg functions. See emitEpilogue |
| if (isVarArg) |
| continue; |
| // ARMv4T requires BX, see emitEpilogue |
| if (!STI.hasV5TOps()) |
| continue; |
| |
| // CMSE entry functions must return via BXNS, see emitEpilogue. |
| if (AFI->isCmseNSEntryFunction()) |
| continue; |
| |
| // Pop LR into PC. |
| Reg = ARM::PC; |
| (*MIB).setDesc(TII.get(ARM::tPOP_RET)); |
| if (MI != MBB.end()) |
| MIB.copyImplicitOps(*MI); |
| MI = MBB.erase(MI); |
| } |
| MIB.addReg(Reg, getDefRegState(true)); |
| NeedsPop = true; |
| } |
| |
| // It's illegal to emit pop instruction without operands. |
| if (NeedsPop) |
| MBB.insert(MI, &*MIB); |
| else |
| MF.DeleteMachineInstr(MIB); |
| |
| return true; |
| } |
