blob: c167d0647ecb46ca733cac84c20bcc177ee74d59 [file] [log] [blame]
; RUN: llc < %s -march=sparcv9 -disable-sparc-delay-filler -disable-sparc-leaf-proc | FileCheck %s --check-prefix=CHECK --check-prefix=HARD
; RUN: llc < %s -march=sparcv9 -disable-sparc-delay-filler -disable-sparc-leaf-proc -mattr=soft-float | FileCheck %s --check-prefix=CHECK --check-prefix=SOFT
; CHECK-LABEL: intarg:
; The save/restore frame is not strictly necessary here, but we would need to
; refer to %o registers instead.
; CHECK: save %sp, -128, %sp
; CHECK: ldx [%fp+2231], [[R2:%[gilo][0-7]]]
; CHECK: ld [%fp+2227], [[R1:%[gilo][0-7]]]
; CHECK: stb %i0, [%i4]
; CHECK: stb %i1, [%i4]
; CHECK: sth %i2, [%i4]
; CHECK: st %i3, [%i4]
; CHECK: stx %i4, [%i4]
; CHECK: st %i5, [%i4]
; CHECK: st [[R1]], [%i4]
; CHECK: stx [[R2]], [%i4]
; CHECK: restore
define void @intarg(i8 %a0, ; %i0
i8 %a1, ; %i1
i16 %a2, ; %i2
i32 %a3, ; %i3
i8* %a4, ; %i4
i32 %a5, ; %i5
i32 signext %a6, ; [%fp+BIAS+176]
i8* %a7) { ; [%fp+BIAS+184]
store volatile i8 %a0, i8* %a4
store volatile i8 %a1, i8* %a4
%p16 = bitcast i8* %a4 to i16*
store volatile i16 %a2, i16* %p16
%p32 = bitcast i8* %a4 to i32*
store volatile i32 %a3, i32* %p32
%pp = bitcast i8* %a4 to i8**
store volatile i8* %a4, i8** %pp
store volatile i32 %a5, i32* %p32
store volatile i32 %a6, i32* %p32
store volatile i8* %a7, i8** %pp
ret void
}
; CHECK-LABEL: call_intarg:
; 16 saved + 8 args.
; CHECK: save %sp, -192, %sp
; Sign-extend and store the full 64 bits.
; CHECK: sra %i0, 0, [[R:%[gilo][0-7]]]
; Use %o0-%o5 for outgoing arguments
; CHECK: mov 5, %o5
; CHECK: stx [[R]], [%sp+2223]
; CHECK: call intarg
; CHECK-NOT: add %sp
; CHECK: restore
define void @call_intarg(i32 %i0, i8* %i1) {
call void @intarg(i8 0, i8 1, i16 2, i32 3, i8* undef, i32 5, i32 %i0, i8* %i1)
ret void
}
; CHECK-LABEL: floatarg:
; HARD: save %sp, -128, %sp
; HARD: ld [%fp+2307], [[F:%f[0-9]+]]
; HARD: fstod %f1,
; HARD: faddd %f2,
; HARD: faddd %f4,
; HARD: faddd %f6,
; HARD: fadds %f31, [[F]]
; SOFT: save %sp, -176, %sp
; SOFT: ld [%fp+2299], %i4
; SOFT: ld [%fp+2307], %i5
; SOFT: srl %i0, 0, %o0
; SOFT-NEXT: call __extendsfdf2
; SOFT: mov %o0, %o1
; SOFT: mov %i1, %o0
; SOFT: mov %i2, %o0
; SOFT: mov %i3, %o0
define double @floatarg(float %a0, ; %f1
double %a1, ; %d2
double %a2, ; %d4
double %a3, ; %d6
float %a4, ; %f9
float %a5, ; %f11
float %a6, ; %f13
float %a7, ; %f15
float %a8, ; %f17
float %a9, ; %f19
float %a10, ; %f21
float %a11, ; %f23
float %a12, ; %f25
float %a13, ; %f27
float %a14, ; %f29
float %a15, ; %f31
float %a16, ; [%fp+BIAS+256] (using 8 bytes)
double %a17) { ; [%fp+BIAS+264] (using 8 bytes)
%d0 = fpext float %a0 to double
%s1 = fadd double %a1, %d0
%s2 = fadd double %a2, %s1
%s3 = fadd double %a3, %s2
%s16 = fadd float %a15, %a16
%d16 = fpext float %s16 to double
%s17 = fadd double %d16, %s3
ret double %s17
}
; CHECK-LABEL: call_floatarg:
; CHECK: save %sp, -272, %sp
; Store 8 bytes in full slot.
; HARD: std %f2, [%sp+2311]
; Store 4 bytes, right-aligned in slot.
; HARD: st %f1, [%sp+2307]
; HARD: fmovd %f2, %f4
; SOFT: stx %i1, [%sp+2311]
; SOFT: stx %i0, [%sp+2303]
; SOFT: stx %i2, [%sp+2295]
; SOFT: stx %i2, [%sp+2287]
; SOFT: stx %i2, [%sp+2279]
; SOFT: stx %i2, [%sp+2271]
; SOFT: stx %i2, [%sp+2263]
; SOFT: stx %i2, [%sp+2255]
; SOFT: stx %i2, [%sp+2247]
; SOFT: stx %i2, [%sp+2239]
; SOFT: stx %i2, [%sp+2231]
; SOFT: stx %i2, [%sp+2223]
; SOFT: mov %i2, %o0
; SOFT: mov %i1, %o1
; SOFT: mov %i1, %o2
; SOFT: mov %i1, %o3
; SOFT: mov %i2, %o4
; SOFT: mov %i2, %o5
; CHECK: call floatarg
; CHECK-NOT: add %sp
; CHECK: restore
define void @call_floatarg(float %f1, double %d2, float %f5, double *%p) {
%r = call double @floatarg(float %f5, double %d2, double %d2, double %d2,
float %f5, float %f5, float %f5, float %f5,
float %f5, float %f5, float %f5, float %f5,
float %f5, float %f5, float %f5, float %f5,
float %f1, double %d2)
store double %r, double* %p
ret void
}
; CHECK-LABEL: mixedarg:
; CHECK: ldx [%fp+2247]
; CHECK: ldx [%fp+2231]
; SOFT: ldx [%fp+2239], %i0
; HARD: fstod %f3
; HARD: faddd %f6
; HARD: faddd %f16
; SOFT: mov %o0, %o1
; SOFT-NEXT: mov %i3, %o0
; SOFT-NEXT: call __adddf3
; SOFT: mov %o0, %o1
; SOFT-NEXT: mov %i0, %o0
; SOFT-NEXT: call __adddf3
; HARD: std %f0, [%i1]
; SOFT: stx %o0, [%i5]
define void @mixedarg(i8 %a0, ; %i0
float %a1, ; %f3
i16 %a2, ; %i2
double %a3, ; %d6
i13 %a4, ; %i4
float %a5, ; %f11
i64 %a6, ; [%fp+BIAS+176]
double *%a7, ; [%fp+BIAS+184]
double %a8, ; %d16
i16* %a9) { ; [%fp+BIAS+200]
%d1 = fpext float %a1 to double
%s3 = fadd double %a3, %d1
%s8 = fadd double %a8, %s3
store double %s8, double* %a7
store i16 %a2, i16* %a9
ret void
}
; CHECK-LABEL: call_mixedarg:
; CHECK: stx %i2, [%sp+2247]
; SOFT: stx %i1, [%sp+2239]
; CHECK: stx %i0, [%sp+2223]
; HARD: fmovd %f2, %f6
; HARD: fmovd %f2, %f16
; SOFT: mov %i1, %o3
; CHECK: call mixedarg
; CHECK-NOT: add %sp
; CHECK: restore
define void @call_mixedarg(i64 %i0, double %f2, i16* %i2) {
call void @mixedarg(i8 undef,
float undef,
i16 undef,
double %f2,
i13 undef,
float undef,
i64 %i0,
double* undef,
double %f2,
i16* %i2)
ret void
}
; The inreg attribute is used to indicate 32-bit sized struct elements that
; share an 8-byte slot.
; CHECK-LABEL: inreg_fi:
; SOFT: srlx %i0, 32, [[R:%[gilo][0-7]]]
; HARD: fstoi %f1
; SOFT: call __fixsfsi
; HARD: srlx %i0, 32, [[R:%[gilo][0-7]]]
; CHECK: sub [[R]],
define i32 @inreg_fi(i32 inreg %a0, ; high bits of %i0
float inreg %a1) { ; %f1
%b1 = fptosi float %a1 to i32
%rv = sub i32 %a0, %b1
ret i32 %rv
}
; CHECK-LABEL: call_inreg_fi:
; Allocate space for 6 arguments, even when only 2 are used.
; CHECK: save %sp, -176, %sp
; HARD-DAG: sllx %i1, 32, %o0
; HARD-DAG: fmovs %f5, %f1
; SOFT: srl %i2, 0, %i0
; SOFT: sllx %i1, 32, %i1
; SOFT: or %i1, %i0, %o0
; CHECK: call inreg_fi
define void @call_inreg_fi(i32* %p, i32 %i1, float %f5) {
%x = call i32 @inreg_fi(i32 %i1, float %f5)
ret void
}
; CHECK-LABEL: inreg_ff:
; HARD: fsubs %f0, %f1, %f0
; SOFT: srlx %i0, 32, %o0
; SOFT: srl %i0, 0, %o1
; SOFT: call __subsf3
define float @inreg_ff(float inreg %a0, ; %f0
float inreg %a1) { ; %f1
%rv = fsub float %a0, %a1
ret float %rv
}
; CHECK-LABEL: call_inreg_ff:
; HARD-DAG: fmovs %f3, %f0
; HARD-DAG: fmovs %f5, %f1
; SOFT: srl %i2, 0, %i0
; SOFT: sllx %i1, 32, %i1
; SOFT: or %i1, %i0, %o0
; CHECK: call inreg_ff
define void @call_inreg_ff(i32* %p, float %f3, float %f5) {
%x = call float @inreg_ff(float %f3, float %f5)
ret void
}
; CHECK-LABEL: inreg_if:
; HARD: fstoi %f0
; SOFT: srlx %i0, 32, %o0
; SOFT: call __fixsfsi
; CHECK: sub %i0
define i32 @inreg_if(float inreg %a0, ; %f0
i32 inreg %a1) { ; low bits of %i0
%b0 = fptosi float %a0 to i32
%rv = sub i32 %a1, %b0
ret i32 %rv
}
; CHECK-LABEL: call_inreg_if:
; HARD: fmovs %f3, %f0
; HARD: mov %i2, %o0
; SOFT: srl %i2, 0, %i0
; SOFT: sllx %i1, 32, %i1
; SOFT: or %i1, %i0, %o0
; CHECK: call inreg_if
define void @call_inreg_if(i32* %p, float %f3, i32 %i2) {
%x = call i32 @inreg_if(float %f3, i32 %i2)
ret void
}
; The frontend shouldn't do this. Just pass i64 instead.
; CHECK-LABEL: inreg_ii:
; CHECK: srlx %i0, 32, [[R:%[gilo][0-7]]]
; CHECK: sub %i0, [[R]], %i0
define i32 @inreg_ii(i32 inreg %a0, ; high bits of %i0
i32 inreg %a1) { ; low bits of %i0
%rv = sub i32 %a1, %a0
ret i32 %rv
}
; CHECK-LABEL: call_inreg_ii:
; CHECK: srl %i2, 0, [[R2:%[gilo][0-7]]]
; CHECK: sllx %i1, 32, [[R1:%[gilo][0-7]]]
; CHECK: or [[R1]], [[R2]], %o0
; CHECK: call inreg_ii
define void @call_inreg_ii(i32* %p, i32 %i1, i32 %i2) {
%x = call i32 @inreg_ii(i32 %i1, i32 %i2)
ret void
}
; Structs up to 32 bytes in size can be returned in registers.
; CHECK-LABEL: ret_i64_pair:
; CHECK: ldx [%i2], %i0
; CHECK: ldx [%i3], %i1
define { i64, i64 } @ret_i64_pair(i32 %a0, i32 %a1, i64* %p, i64* %q) {
%r1 = load i64, i64* %p
%rv1 = insertvalue { i64, i64 } undef, i64 %r1, 0
store i64 0, i64* %p
%r2 = load i64, i64* %q
%rv2 = insertvalue { i64, i64 } %rv1, i64 %r2, 1
ret { i64, i64 } %rv2
}
; CHECK-LABEL: call_ret_i64_pair:
; CHECK: call ret_i64_pair
; CHECK: stx %o0, [%i0]
; CHECK: stx %o1, [%i0]
define void @call_ret_i64_pair(i64* %i0) {
%rv = call { i64, i64 } @ret_i64_pair(i32 undef, i32 undef,
i64* undef, i64* undef)
%e0 = extractvalue { i64, i64 } %rv, 0
store volatile i64 %e0, i64* %i0
%e1 = extractvalue { i64, i64 } %rv, 1
store i64 %e1, i64* %i0
ret void
}
; This is not a C struct, the i32 member uses 8 bytes, but the float only 4.
; CHECK-LABEL: ret_i32_float_pair:
; CHECK: ld [%i2], %i0
; HARD: ld [%i3], %f2
; SOFT: ld [%i3], %i1
define { i32, float } @ret_i32_float_pair(i32 %a0, i32 %a1,
i32* %p, float* %q) {
%r1 = load i32, i32* %p
%rv1 = insertvalue { i32, float } undef, i32 %r1, 0
store i32 0, i32* %p
%r2 = load float, float* %q
%rv2 = insertvalue { i32, float } %rv1, float %r2, 1
ret { i32, float } %rv2
}
; CHECK-LABEL: call_ret_i32_float_pair:
; CHECK: call ret_i32_float_pair
; CHECK: st %o0, [%i0]
; HARD: st %f2, [%i1]
; SOFT: st %o1, [%i1]
define void @call_ret_i32_float_pair(i32* %i0, float* %i1) {
%rv = call { i32, float } @ret_i32_float_pair(i32 undef, i32 undef,
i32* undef, float* undef)
%e0 = extractvalue { i32, float } %rv, 0
store i32 %e0, i32* %i0
%e1 = extractvalue { i32, float } %rv, 1
store float %e1, float* %i1
ret void
}
; This is a C struct, each member uses 4 bytes.
; CHECK-LABEL: ret_i32_float_packed:
; CHECK: ld [%i2], [[R:%[gilo][0-7]]]
; HARD: ld [%i3], %f1
; SOFT: ld [%i3], %i1
; CHECK: sllx [[R]], 32, %i0
define inreg { i32, float } @ret_i32_float_packed(i32 %a0, i32 %a1,
i32* %p, float* %q) {
%r1 = load i32, i32* %p
%rv1 = insertvalue { i32, float } undef, i32 %r1, 0
store i32 0, i32* %p
%r2 = load float, float* %q
%rv2 = insertvalue { i32, float } %rv1, float %r2, 1
ret { i32, float } %rv2
}
; CHECK-LABEL: call_ret_i32_float_packed:
; CHECK: call ret_i32_float_packed
; CHECK: srlx %o0, 32, [[R:%[gilo][0-7]]]
; CHECK: st [[R]], [%i0]
; HARD: st %f1, [%i1]
; SOFT: st %o0, [%i1]
define void @call_ret_i32_float_packed(i32* %i0, float* %i1) {
%rv = call { i32, float } @ret_i32_float_packed(i32 undef, i32 undef,
i32* undef, float* undef)
%e0 = extractvalue { i32, float } %rv, 0
store i32 %e0, i32* %i0
%e1 = extractvalue { i32, float } %rv, 1
store float %e1, float* %i1
ret void
}
; The C frontend should use i64 to return { i32, i32 } structs, but verify that
; we don't miscompile thi case where both struct elements are placed in %i0.
; CHECK-LABEL: ret_i32_packed:
; CHECK: ld [%i2], [[R1:%[gilo][0-7]]]
; CHECK: ld [%i3], [[R2:%[gilo][0-7]]]
; CHECK: sllx [[R2]], 32, [[R3:%[gilo][0-7]]]
; CHECK: or [[R3]], [[R1]], %i0
define inreg { i32, i32 } @ret_i32_packed(i32 %a0, i32 %a1,
i32* %p, i32* %q) {
%r1 = load i32, i32* %p
%rv1 = insertvalue { i32, i32 } undef, i32 %r1, 1
store i32 0, i32* %p
%r2 = load i32, i32* %q
%rv2 = insertvalue { i32, i32 } %rv1, i32 %r2, 0
ret { i32, i32 } %rv2
}
; CHECK-LABEL: call_ret_i32_packed:
; CHECK: call ret_i32_packed
; CHECK: srlx %o0, 32, [[R:%[gilo][0-7]]]
; CHECK: st [[R]], [%i0]
; CHECK: st %o0, [%i1]
define void @call_ret_i32_packed(i32* %i0, i32* %i1) {
%rv = call { i32, i32 } @ret_i32_packed(i32 undef, i32 undef,
i32* undef, i32* undef)
%e0 = extractvalue { i32, i32 } %rv, 0
store i32 %e0, i32* %i0
%e1 = extractvalue { i32, i32 } %rv, 1
store i32 %e1, i32* %i1
ret void
}
; The return value must be sign-extended to 64 bits.
; CHECK-LABEL: ret_sext:
; CHECK: sra %i0, 0, %i0
define signext i32 @ret_sext(i32 %a0) {
ret i32 %a0
}
; CHECK-LABEL: ret_zext:
; CHECK: srl %i0, 0, %i0
define zeroext i32 @ret_zext(i32 %a0) {
ret i32 %a0
}
; CHECK-LABEL: ret_nosext:
; CHECK-NOT: sra
define signext i32 @ret_nosext(i32 signext %a0) {
ret i32 %a0
}
; CHECK-LABEL: ret_nozext:
; CHECK-NOT: srl
define signext i32 @ret_nozext(i32 signext %a0) {
ret i32 %a0
}
; CHECK-LABEL: test_register_directive:
; CHECK: .register %g2, #scratch
; CHECK: .register %g3, #scratch
; CHECK: add %i0, 2, %g2
; CHECK: add %i0, 3, %g3
define i32 @test_register_directive(i32 %i0) {
entry:
%0 = add nsw i32 %i0, 2
%1 = add nsw i32 %i0, 3
tail call void asm sideeffect "", "r,r,~{l0},~{l1},~{l2},~{l3},~{l4},~{l5},~{l6},~{l7},~{i0},~{i1},~{i2},~{i3},~{i4},~{i5},~{i6},~{i7},~{o0},~{o1},~{o2},~{o3},~{o4},~{o5},~{o6},~{o7},~{g1},~{g4},~{g5},~{g6},~{g7}"(i32 %0, i32 %1)
%2 = add nsw i32 %0, %1
ret i32 %2
}
; CHECK-LABEL: test_large_stack:
; CHECK: sethi 16, %g1
; CHECK: xor %g1, -176, %g1
; CHECK: save %sp, %g1, %sp
; CHECK: sethi 14, %g1
; CHECK: xor %g1, -1, %g1
; CHECK: add %g1, %fp, %g1
; CHECK: call use_buf
define i32 @test_large_stack() {
entry:
%buffer1 = alloca [16384 x i8], align 8
%buffer1.sub = getelementptr inbounds [16384 x i8], [16384 x i8]* %buffer1, i32 0, i32 0
%0 = call i32 @use_buf(i32 16384, i8* %buffer1.sub)
ret i32 %0
}
declare i32 @use_buf(i32, i8*)
; CHECK-LABEL: test_fp128_args:
; HARD-DAG: std %f0, [%fp+{{.+}}]
; HARD-DAG: std %f2, [%fp+{{.+}}]
; HARD-DAG: std %f6, [%fp+{{.+}}]
; HARD-DAG: std %f4, [%fp+{{.+}}]
; HARD: add %fp, [[Offset:[0-9]+]], %o0
; HARD: call _Qp_add
; HARD: ldd [%fp+[[Offset]]], %f0
; SOFT-DAG: mov %i0, %o0
; SOFT-DAG: mov %i1, %o1
; SOFT-DAG: mov %i2, %o2
; SOFT-DAG: mov %i3, %o3
; SOFT: call __addtf3
; SOFT: mov %o0, %i0
; SOFT: mov %o1, %i1
define fp128 @test_fp128_args(fp128 %a, fp128 %b) {
entry:
%0 = fadd fp128 %a, %b
ret fp128 %0
}
declare i64 @receive_fp128(i64 %a, ...)
; CHECK-LABEL: test_fp128_variable_args:
; HARD-DAG: std %f4, [%sp+[[Offset0:[0-9]+]]]
; HARD-DAG: std %f6, [%sp+[[Offset1:[0-9]+]]]
; HARD-DAG: ldx [%sp+[[Offset0]]], %o2
; HARD-DAG: ldx [%sp+[[Offset1]]], %o3
; SOFT-DAG: mov %i0, %o0
; SOFT-DAG: mov %i1, %o1
; SOFT-DAG: mov %i2, %o2
; CHECK: call receive_fp128
define i64 @test_fp128_variable_args(i64 %a, fp128 %b) {
entry:
%0 = call i64 (i64, ...) @receive_fp128(i64 %a, fp128 %b)
ret i64 %0
}
; CHECK-LABEL: test_call_libfunc:
; HARD: st %f1, [%fp+[[Offset0:[0-9]+]]]
; HARD: fmovs %f3, %f1
; SOFT: srl %i1, 0, %o0
; CHECK: call cosf
; HARD: st %f0, [%fp+[[Offset1:[0-9]+]]]
; HARD: ld [%fp+[[Offset0]]], %f1
; SOFT: mov %o0, %i1
; SOFT: srl %i0, 0, %o0
; CHECK: call sinf
; HARD: ld [%fp+[[Offset1]]], %f1
; HARD: fmuls %f1, %f0, %f0
; SOFT: mov %o0, %o1
; SOFT: mov %i1, %o0
; SOFT: call __mulsf3
; SOFT: sllx %o0, 32, %i0
define inreg float @test_call_libfunc(float %arg0, float %arg1) {
entry:
%0 = tail call inreg float @cosf(float %arg1)
%1 = tail call inreg float @sinf(float %arg0)
%2 = fmul float %0, %1
ret float %2
}
declare inreg float @cosf(float %arg) readnone nounwind
declare inreg float @sinf(float %arg) readnone nounwind