//===-- AVRInstrInfo.td - AVR Instruction defs -------------*- tablegen -*-===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// This file describes the AVR instructions in TableGen format.
//
//===----------------------------------------------------------------------===//

include "AVRInstrFormats.td"

//===----------------------------------------------------------------------===//
// AVR Type Profiles
//===----------------------------------------------------------------------===//

def SDT_AVRCallSeqStart : SDCallSeqStart<[SDTCisVT<0, i16>, SDTCisVT<1, i16>]>;
def SDT_AVRCallSeqEnd : SDCallSeqEnd<[SDTCisVT<0, i16>, SDTCisVT<1, i16>]>;
def SDT_AVRCall : SDTypeProfile<0, -1, [SDTCisVT<0, iPTR>]>;
def SDT_AVRWrapper : SDTypeProfile<1, 1, [SDTCisSameAs<0, 1>, SDTCisPtrTy<0>]>;
def SDT_AVRBrcond : SDTypeProfile<0, 2,
                                  [SDTCisVT<0, OtherVT>, SDTCisVT<1, i8>]>;
def SDT_AVRCmp : SDTypeProfile<0, 2, [SDTCisSameAs<0, 1>]>;
def SDT_AVRTst : SDTypeProfile<0, 1, [SDTCisInt<0>]>;
def SDT_AVRSelectCC : SDTypeProfile<1, 3, [SDTCisSameAs<0, 1>,
                                    SDTCisSameAs<1, 2>, SDTCisVT<3, i8>]>;

//===----------------------------------------------------------------------===//
// AVR Specific Node Definitions
//===----------------------------------------------------------------------===//

def AVRretflag : SDNode<"AVRISD::RET_FLAG", SDTNone,
                        [SDNPHasChain, SDNPOptInGlue, SDNPVariadic]>;
def AVRretiflag : SDNode<"AVRISD::RETI_FLAG", SDTNone,
                         [SDNPHasChain, SDNPOptInGlue, SDNPVariadic]>;

def AVRcallseq_start : SDNode<"ISD::CALLSEQ_START", SDT_AVRCallSeqStart,
                              [SDNPHasChain, SDNPOutGlue]>;
def AVRcallseq_end : SDNode<"ISD::CALLSEQ_END", SDT_AVRCallSeqEnd,
                            [SDNPHasChain, SDNPOptInGlue, SDNPOutGlue]>;

def AVRcall : SDNode<"AVRISD::CALL", SDT_AVRCall,
                     [SDNPHasChain, SDNPOutGlue, SDNPOptInGlue, SDNPVariadic]>;

def AVRWrapper : SDNode<"AVRISD::WRAPPER", SDT_AVRWrapper>;

def AVRbrcond : SDNode<"AVRISD::BRCOND", SDT_AVRBrcond,
                       [SDNPHasChain, SDNPInGlue]>;
def AVRcmp : SDNode<"AVRISD::CMP", SDT_AVRCmp, [SDNPOutGlue]>;
def AVRcmpc : SDNode<"AVRISD::CMPC", SDT_AVRCmp, [SDNPInGlue, SDNPOutGlue]>;
def AVRtst : SDNode<"AVRISD::TST", SDT_AVRTst, [SDNPOutGlue]>;
def AVRselectcc: SDNode<"AVRISD::SELECT_CC", SDT_AVRSelectCC, [SDNPInGlue]>;

// Shift nodes.
def AVRlsl : SDNode<"AVRISD::LSL", SDTIntUnaryOp>;
def AVRlsl4 : SDNode<"AVRISD::LSL4", SDTIntUnaryOp>;
def AVRlsl8 : SDNode<"AVRISD::LSL8", SDTIntUnaryOp>;
def AVRlsl12 : SDNode<"AVRISD::LSL12", SDTIntUnaryOp>;
def AVRlsr : SDNode<"AVRISD::LSR", SDTIntUnaryOp>;
def AVRlsr4 : SDNode<"AVRISD::LSR4", SDTIntUnaryOp>;
def AVRlsr8 : SDNode<"AVRISD::LSR8", SDTIntUnaryOp>;
def AVRlsr12 : SDNode<"AVRISD::LSR12", SDTIntUnaryOp>;
def AVRrol : SDNode<"AVRISD::ROL", SDTIntUnaryOp>;
def AVRror : SDNode<"AVRISD::ROR", SDTIntUnaryOp>;
def AVRasr : SDNode<"AVRISD::ASR", SDTIntUnaryOp>;
def AVRasr8 : SDNode<"AVRISD::ASR8", SDTIntUnaryOp>;
def AVRlsl7 : SDNode<"AVRISD::LSL7", SDTIntUnaryOp>;
def AVRlsr7 : SDNode<"AVRISD::LSR7", SDTIntUnaryOp>;
def AVRasr7 : SDNode<"AVRISD::ASR7", SDTIntUnaryOp>;

// Pseudo shift nodes for non-constant shift amounts.
def AVRlslLoop : SDNode<"AVRISD::LSLLOOP", SDTIntShiftOp>;
def AVRlsrLoop : SDNode<"AVRISD::LSRLOOP", SDTIntShiftOp>;
def AVRrolLoop : SDNode<"AVRISD::ROLLOOP", SDTIntShiftOp>;
def AVRrorLoop : SDNode<"AVRISD::RORLOOP", SDTIntShiftOp>;
def AVRasrLoop : SDNode<"AVRISD::ASRLOOP", SDTIntShiftOp>;

// SWAP node.
def AVRSwap : SDNode<"AVRISD::SWAP", SDTIntUnaryOp>;

//===----------------------------------------------------------------------===//
// AVR Operands, Complex Patterns and Transformations Definitions.
//===----------------------------------------------------------------------===//

def imm8_neg_XFORM : SDNodeXForm<imm,
[{
  return CurDAG->getTargetConstant(-N->getAPIntValue(), SDLoc(N), MVT::i8);
}]>;

def imm16_neg_XFORM : SDNodeXForm<imm,
[{
  return CurDAG->getTargetConstant(-N->getAPIntValue(), SDLoc(N), MVT::i16);
}]>;

def imm0_63_neg : PatLeaf<(imm),
[{
  int64_t val = -N->getSExtValue();
  return val >= 0 && val < 64;
}], imm16_neg_XFORM>;

def uimm6 : PatLeaf<(imm), [{ return isUInt<6>(N->getZExtValue()); }]>;

// imm_com8_XFORM - Return the complement of a imm_com8 value
def imm_com8_XFORM : SDNodeXForm<imm, [{
  return CurDAG->getTargetConstant(~((uint8_t)N->getZExtValue()), SDLoc(N),
                                   MVT::i8);
}]>;

// imm_com8 - Match an immediate that is a complement
// of a 8-bit immediate.
// Note: this pattern doesn't require an encoder method and such, as it's
// only used on aliases (Pat<> and InstAlias<>). The actual encoding
// is handled by the destination instructions, which use imm_com8.
def imm_com8_asmoperand : AsmOperandClass { let Name = "ImmCom8"; }
def imm_com8 : Operand<i8> {
  let ParserMatchClass = imm_com8_asmoperand;
}

def ioaddr_XFORM : SDNodeXForm<imm,
[{
  uint8_t offset = Subtarget->getIORegisterOffset();
  return CurDAG->getTargetConstant(uint8_t(N->getZExtValue()) - offset,
                                   SDLoc(N), MVT::i8);
}]>;

def iobitpos8_XFORM : SDNodeXForm<imm,
[{
  return CurDAG->getTargetConstant(Log2_32(uint8_t(N->getZExtValue())),
                                   SDLoc(N), MVT::i8);
}]>;

def iobitposn8_XFORM : SDNodeXForm<imm,
[{
  return CurDAG->getTargetConstant(Log2_32(uint8_t(~N->getZExtValue())),
                                   SDLoc(N), MVT::i8);
}]>;

def ioaddr8 : PatLeaf<(imm),
[{
  uint8_t offset = Subtarget->getIORegisterOffset();
  uint64_t val = N->getZExtValue() - offset;
  return val < 0x40;
}], ioaddr_XFORM>;

def lowioaddr8 : PatLeaf<(imm),
[{
  uint8_t offset = Subtarget->getIORegisterOffset();
  uint64_t val = N->getZExtValue() - offset;
  return val < 0x20;
}], ioaddr_XFORM>;

def ioaddr16 : PatLeaf<(imm),
[{
  uint8_t offset = Subtarget->getIORegisterOffset();
  uint64_t val = N->getZExtValue() - offset;
  return val < 0x3f;
}], ioaddr_XFORM>;

def iobitpos8 : PatLeaf<(imm),
[{
  return isPowerOf2_32(uint8_t(N->getZExtValue()));
}], iobitpos8_XFORM>;

def iobitposn8 : PatLeaf<(imm),
[{
  return isPowerOf2_32(uint8_t(~N->getZExtValue()));
}], iobitposn8_XFORM>;

def MemriAsmOperand : AsmOperandClass {
  let Name = "Memri";
  let ParserMethod = "parseMemriOperand";
}

/// Address operand for `reg+imm` used by STD and LDD.
def memri : Operand<iPTR>
{
  let MIOperandInfo = (ops PTRDISPREGS, i16imm);

  let PrintMethod = "printMemri";
  let EncoderMethod = "encodeMemri";

  let ParserMatchClass = MemriAsmOperand;
}

// Address operand for `SP+imm` used by STD{W}SPQRr
def memspi : Operand<iPTR>
{
  let MIOperandInfo = (ops GPRSP, i16imm);
}

def relbrtarget_7 : Operand<OtherVT>
{
    let PrintMethod   = "printPCRelImm";
    let EncoderMethod = "encodeRelCondBrTarget<AVR::fixup_7_pcrel>";
}

def brtarget_13 : Operand<OtherVT>
{
    let PrintMethod   = "printPCRelImm";
    let EncoderMethod = "encodeRelCondBrTarget<AVR::fixup_13_pcrel>";
}

// The target of a 22 or 16-bit call/jmp instruction.
def call_target : Operand<iPTR>
{
    let EncoderMethod = "encodeCallTarget";
    let DecoderMethod = "decodeCallTarget";
}

// A 16-bit address (which can lead to an R_AVR_16 relocation).
def imm16 : Operand<i16>
{
    let EncoderMethod = "encodeImm<AVR::fixup_16, 2>";
}

/// A 6-bit immediate used in the ADIW/SBIW instructions.
def imm_arith6 : Operand<i16>
{
    let EncoderMethod = "encodeImm<AVR::fixup_6_adiw, 0>";
}

/// An 8-bit immediate inside an instruction with the same format
/// as the `LDI` instruction (the `FRdK` format).
def imm_ldi8 : Operand<i8>
{
    let EncoderMethod = "encodeImm<AVR::fixup_ldi, 0>";
}

/// A 5-bit port number used in SBIC and friends (the `FIOBIT` format).
def imm_port5 : Operand<i8>
{
    let EncoderMethod = "encodeImm<AVR::fixup_port5, 0>";
}

/// A 6-bit port number used in the `IN` instruction and friends (the
/// `FIORdA` format.
def imm_port6 : Operand<i8>
{
    let EncoderMethod = "encodeImm<AVR::fixup_port6, 0>";
}

// Addressing mode pattern reg+imm6
def addr : ComplexPattern<iPTR, 2, "SelectAddr", [], [SDNPWantRoot]>;

// AsmOperand class for a pointer register.
// Used with the LD/ST family of instructions.
// See FSTLD in AVRInstrFormats.td
def PtrRegAsmOperand : AsmOperandClass
{
   let Name = "Reg";
}

// A special operand type for the LD/ST instructions.
// It converts the pointer register number into a two-bit field used in the
// instruction.
def LDSTPtrReg : Operand<i16>
{
    let MIOperandInfo = (ops PTRREGS);
    let EncoderMethod = "encodeLDSTPtrReg";

    let ParserMatchClass = PtrRegAsmOperand;
}

// A special operand type for the LDD/STD instructions.
// It behaves identically to the LD/ST version, except restricts
// the pointer registers to Y and Z.
def LDDSTDPtrReg : Operand<i16>
{
    let MIOperandInfo = (ops PTRDISPREGS);
    let EncoderMethod = "encodeLDSTPtrReg";

    let ParserMatchClass = PtrRegAsmOperand;
}

//===----------------------------------------------------------------------===//
// AVR predicates for subtarget features
//===----------------------------------------------------------------------===//

def HasSRAM       :    Predicate<"Subtarget->hasSRAM()">,
                         AssemblerPredicate<(all_of FeatureSRAM)>;

def HasJMPCALL    :    Predicate<"Subtarget->hasJMPCALL()">,
                         AssemblerPredicate<(all_of FeatureJMPCALL)>;

def HasIJMPCALL   :    Predicate<"Subtarget->hasIJMPCALL()">,
                         AssemblerPredicate<(all_of FeatureIJMPCALL)>;

def HasEIJMPCALL  :    Predicate<"Subtarget->hasEIJMPCALL()">,
                         AssemblerPredicate<(all_of FeatureEIJMPCALL)>;

def HasADDSUBIW   :    Predicate<"Subtarget->hasADDSUBIW()">,
                         AssemblerPredicate<(all_of FeatureADDSUBIW)>;

def HasSmallStack :    Predicate<"Subtarget->HasSmallStack()">,
                         AssemblerPredicate<(all_of FeatureSmallStack)>;

def HasMOVW       :    Predicate<"Subtarget->hasMOVW()">,
                         AssemblerPredicate<(all_of FeatureMOVW)>;

def HasLPM        :    Predicate<"Subtarget->hasLPM()">,
                         AssemblerPredicate<(all_of FeatureLPM)>;

def HasLPMX       :    Predicate<"Subtarget->hasLPMX()">,
                         AssemblerPredicate<(all_of FeatureLPMX)>;

def HasELPM       :    Predicate<"Subtarget->hasELPM()">,
                         AssemblerPredicate<(all_of FeatureELPM)>;

def HasELPMX      :    Predicate<"Subtarget->hasELPMX()">,
                         AssemblerPredicate<(all_of FeatureELPMX)>;

def HasSPM        :    Predicate<"Subtarget->hasSPM()">,
                         AssemblerPredicate<(all_of FeatureSPM)>;

def HasSPMX       :    Predicate<"Subtarget->hasSPMX()">,
                         AssemblerPredicate<(all_of FeatureSPMX)>;

def HasDES        :    Predicate<"Subtarget->hasDES()">,
                         AssemblerPredicate<(all_of FeatureDES)>;

def SupportsRMW   :    Predicate<"Subtarget->supportsRMW()">,
                         AssemblerPredicate<(all_of FeatureRMW)>;

def SupportsMultiplication : Predicate<"Subtarget->supportsMultiplication()">,
                               AssemblerPredicate<(all_of FeatureMultiplication)>;

def HasBREAK      :    Predicate<"Subtarget->hasBREAK()">,
                         AssemblerPredicate<(all_of FeatureBREAK)>;

def HasTinyEncoding : Predicate<"Subtarget->hasTinyEncoding()">,
                        AssemblerPredicate<(all_of FeatureTinyEncoding)>;


// AVR specific condition code. These correspond to AVR_*_COND in
// AVRInstrInfo.td. They must be kept in synch.
def AVR_COND_EQ : PatLeaf<(i8 0)>;
def AVR_COND_NE : PatLeaf<(i8 1)>;
def AVR_COND_GE : PatLeaf<(i8 2)>;
def AVR_COND_LT : PatLeaf<(i8 3)>;
def AVR_COND_SH : PatLeaf<(i8 4)>;
def AVR_COND_LO : PatLeaf<(i8 5)>;
def AVR_COND_MI : PatLeaf<(i8 6)>;
def AVR_COND_PL : PatLeaf<(i8 7)>;


//===----------------------------------------------------------------------===//
//===----------------------------------------------------------------------===//
// AVR Instruction list
//===----------------------------------------------------------------------===//
//===----------------------------------------------------------------------===//

// ADJCALLSTACKDOWN/UP implicitly use/def SP because they may be expanded into
// a stack adjustment and the codegen must know that they may modify the stack
// pointer before prolog-epilog rewriting occurs.
// Pessimistically assume ADJCALLSTACKDOWN / ADJCALLSTACKUP will become
// sub / add which can clobber SREG.
let Defs = [SP, SREG],
Uses = [SP] in
{
  def ADJCALLSTACKDOWN : Pseudo<(outs),
                                (ins i16imm:$amt, i16imm:$amt2),
                                "#ADJCALLSTACKDOWN",
                                [(AVRcallseq_start timm:$amt, timm:$amt2)]>;

  // R31R30 is used to update SP, since it is a scratch reg and this instruction
  // is placed after the function call then R31R30 should be always free.
  //let Defs = [R31R30],
  //Uses = [R31R30] in
  //:TODO: if we enable this, the pseudo is killed because it looks dead
  def ADJCALLSTACKUP : Pseudo<(outs),
                              (ins i16imm:$amt1, i16imm:$amt2),
                              "#ADJCALLSTACKUP",
                              [(AVRcallseq_end timm:$amt1, timm:$amt2)]>;
}

//===----------------------------------------------------------------------===//
// Addition
//===----------------------------------------------------------------------===//
let isCommutable = 1,
Constraints = "$src = $rd",
Defs = [SREG] in
{
  // ADD Rd, Rr
  // Adds two 8-bit registers.
  def ADDRdRr : FRdRr<0b0000,
                      0b11,
                      (outs GPR8:$rd),
                      (ins GPR8:$src, GPR8:$rr),
                      "add\t$rd, $rr",
                      [(set i8:$rd, (add i8:$src, i8:$rr)),
                       (implicit SREG)]>;

  // ADDW Rd+1:Rd, Rr+1:Rr
  // Pseudo instruction to add four 8-bit registers as two 16-bit values.
  //
  // Expands to:
  // add Rd,    Rr
  // adc Rd+1, Rr+1
  def ADDWRdRr : Pseudo<(outs DREGS:$rd),
                        (ins DREGS:$src, DREGS:$rr),
                        "addw\t$rd, $rr",
                        [(set i16:$rd, (add i16:$src, i16:$rr)),
                         (implicit SREG)]>;

  // ADC Rd, Rr
  // Adds two 8-bit registers with carry.
  let Uses = [SREG] in
  def ADCRdRr : FRdRr<0b0001,
                      0b11,
                      (outs GPR8:$rd),
                      (ins GPR8:$src, GPR8:$rr),
                      "adc\t$rd, $rr",
                      [(set i8:$rd, (adde i8:$src, i8:$rr)),
                       (implicit SREG)]>;

  // ADCW Rd+1:Rd, Rr+1:Rr
  // Pseudo instruction to add four 8-bit registers as two 16-bit values with
  // carry.
  //
  // Expands to:
  // adc Rd,   Rr
  // adc Rd+1, Rr+1
  let Uses = [SREG] in
  def ADCWRdRr : Pseudo<(outs DREGS:$rd),
                        (ins DREGS:$src, DREGS:$rr),
                        "adcw\t$rd, $rr",
                        [(set i16:$rd, (adde i16:$src, i16:$rr)),
                         (implicit SREG)]>;

  // AIDW Rd, k
  // Adds an immediate 6-bit value K to Rd, placing the result in Rd.
  def ADIWRdK : FWRdK<0b0,
                      (outs IWREGS:$rd),
                      (ins IWREGS:$src, imm_arith6:$k),
                      "adiw\t$rd, $k",
                      [(set i16:$rd, (add i16:$src, uimm6:$k)),
                       (implicit SREG)]>,
                Requires<[HasADDSUBIW]>;
}

//===----------------------------------------------------------------------===//
// Subtraction
//===----------------------------------------------------------------------===//
let Constraints = "$src = $rd",
Defs = [SREG] in
{
  // SUB Rd, Rr
  // Subtracts the 8-bit value of Rr from Rd and places the value in Rd.
  def SUBRdRr : FRdRr<0b0001,
                      0b10,
                      (outs GPR8:$rd),
                      (ins GPR8:$src, GPR8:$rr),
                      "sub\t$rd, $rr",
                      [(set i8:$rd, (sub i8:$src, i8:$rr)),
                       (implicit SREG)]>;

  // SUBW Rd+1:Rd, Rr+1:Rr
  // Subtracts two 16-bit values and places the result into Rd.
  //
  // Expands to:
  // sub Rd,   Rr
  // sbc Rd+1, Rr+1
  def SUBWRdRr : Pseudo<(outs DREGS:$rd),
                        (ins DREGS:$src, DREGS:$rr),
                        "subw\t$rd, $rr",
                        [(set i16:$rd, (sub i16:$src, i16:$rr)),
                         (implicit SREG)]>;

  def SUBIRdK : FRdK<0b0101,
                     (outs LD8:$rd),
                     (ins LD8:$src, imm_ldi8:$k),
                     "subi\t$rd, $k",
                     [(set i8:$rd, (sub i8:$src, imm:$k)),
                      (implicit SREG)]>;

  // SUBIW Rd+1:Rd, K+1:K
  //
  // Expands to:
  // subi Rd,   K
  // sbci Rd+1, K+1
  def SUBIWRdK : Pseudo<(outs DLDREGS:$rd),
                        (ins DLDREGS:$src, i16imm:$rr),
                        "subiw\t$rd, $rr",
                        [(set i16:$rd, (sub i16:$src, imm:$rr)),
                         (implicit SREG)]>;

  def SBIWRdK : FWRdK<0b1,
                      (outs IWREGS:$rd),
                      (ins IWREGS:$src, imm_arith6:$k),
                      "sbiw\t$rd, $k",
                      [(set i16:$rd, (sub i16:$src, uimm6:$k)),
                       (implicit SREG)]>,
                Requires<[HasADDSUBIW]>;

  // Subtract with carry operations which must read the carry flag in SREG.
  let Uses = [SREG] in
  {
    def SBCRdRr : FRdRr<0b0000,
                        0b10,
                        (outs GPR8:$rd),
                        (ins GPR8:$src, GPR8:$rr),
                        "sbc\t$rd, $rr",
                        [(set i8:$rd, (sube i8:$src, i8:$rr)),
                         (implicit SREG)]>;

    // SBCW Rd+1:Rd, Rr+1:Rr
    //
    // Expands to:
    // sbc Rd,   Rr
    // sbc Rd+1, Rr+1
    def SBCWRdRr : Pseudo<(outs DREGS:$rd),
                          (ins DREGS:$src, DREGS:$rr),
                          "sbcw\t$rd, $rr",
                          [(set i16:$rd, (sube i16:$src, i16:$rr)),
                           (implicit SREG)]>;

    def SBCIRdK : FRdK<0b0100,
                       (outs LD8:$rd),
                       (ins LD8:$src, imm_ldi8:$k),
                       "sbci\t$rd, $k",
                       [(set i8:$rd, (sube i8:$src, imm:$k)),
                        (implicit SREG)]>;

    // SBCIW Rd+1:Rd, K+1:K
    // sbci Rd,   K
    // sbci Rd+1, K+1
    def SBCIWRdK : Pseudo<(outs DLDREGS:$rd),
                          (ins DLDREGS:$src, i16imm:$rr),
                          "sbciw\t$rd, $rr",
                          [(set i16:$rd, (sube i16:$src, imm:$rr)),
                           (implicit SREG)]>;
  }
}

//===----------------------------------------------------------------------===//
// Increment and Decrement
//===----------------------------------------------------------------------===//
let Constraints = "$src = $rd",
Defs = [SREG] in
{
  def INCRd : FRd<0b1001,
                  0b0100011,
                  (outs GPR8:$rd),
                  (ins GPR8:$src),
                  "inc\t$rd",
                  [(set i8:$rd, (add i8:$src, 1)), (implicit SREG)]>;

  def DECRd : FRd<0b1001,
                  0b0101010,
                  (outs GPR8:$rd),
                  (ins GPR8:$src),
                  "dec\t$rd",
                  [(set i8:$rd, (add i8:$src, -1)), (implicit SREG)]>;
}

//===----------------------------------------------------------------------===//
// Multiplication
//===----------------------------------------------------------------------===//

let isCommutable = 1,
Defs = [R1, R0, SREG] in
{
  // MUL Rd, Rr
  // Multiplies Rd by Rr and places the result into R1:R0.
  let usesCustomInserter = 1 in {
    def MULRdRr : FRdRr<0b1001, 0b11,
                        (outs),
                        (ins GPR8:$lhs, GPR8:$rhs),
                        "mul\t$lhs, $rhs",
                        [/*(set R1, R0, (smullohi i8:$lhs, i8:$rhs))*/]>,
                    Requires<[SupportsMultiplication]>;

    def MULSRdRr : FMUL2RdRr<0,
                             (outs),
                             (ins LD8:$lhs, LD8:$rhs),
                             "muls\t$lhs, $rhs",
                             []>,
                   Requires<[SupportsMultiplication]>;
  }

  def MULSURdRr : FMUL2RdRr<1,
                            (outs),
                            (ins LD8lo:$lhs, LD8lo:$rhs),
                            "mulsu\t$lhs, $rhs",
                            []>,
                  Requires<[SupportsMultiplication]>;

  def FMUL : FFMULRdRr<0b01,
                       (outs),
                       (ins LD8lo:$lhs, LD8lo:$rhs),
                       "fmul\t$lhs, $rhs",
                       []>,
             Requires<[SupportsMultiplication]>;

  def FMULS : FFMULRdRr<0b10,
                        (outs),
                        (ins LD8lo:$lhs, LD8lo:$rhs),
                        "fmuls\t$lhs, $rhs",
                        []>,
              Requires<[SupportsMultiplication]>;

  def FMULSU : FFMULRdRr<0b11,
                         (outs),
                         (ins LD8lo:$lhs, LD8lo:$rhs),
                         "fmulsu\t$lhs, $rhs",
                         []>,
               Requires<[SupportsMultiplication]>;
}

let Defs = [R15, R14, R13, R12, R11, R10, R9,
            R8, R7, R6, R5, R4, R3, R2, R1, R0] in
def DESK : FDES<(outs),
                (ins i8imm:$k),
                "des\t$k",
                []>,
           Requires<[HasDES]>;

//===----------------------------------------------------------------------===//
// Logic
//===----------------------------------------------------------------------===//
let Constraints = "$src = $rd",
Defs = [SREG] in
{
  // Register-Register logic instructions (which have the
  // property of commutativity).
  let isCommutable = 1 in
  {
    def ANDRdRr : FRdRr<0b0010,
                        0b00,
                        (outs GPR8:$rd),
                        (ins GPR8:$src, GPR8:$rr),
                        "and\t$rd, $rr",
                        [(set i8:$rd, (and i8:$src, i8:$rr)),
                         (implicit SREG)]>;

    // ANDW Rd+1:Rd, Rr+1:Rr
    //
    // Expands to:
    // and Rd,   Rr
    // and Rd+1, Rr+1
    def ANDWRdRr : Pseudo<(outs DREGS:$rd),
                          (ins DREGS:$src, DREGS:$rr),
                          "andw\t$rd, $rr",
                          [(set i16:$rd, (and i16:$src, i16:$rr)),
                           (implicit SREG)]>;

    def ORRdRr : FRdRr<0b0010,
                       0b10,
                       (outs GPR8:$rd),
                       (ins GPR8:$src, GPR8:$rr),
                       "or\t$rd, $rr",
                       [(set i8:$rd, (or i8:$src, i8:$rr)),
                        (implicit SREG)]>;

    // ORW Rd+1:Rd, Rr+1:Rr
    //
    // Expands to:
    // or Rd,   Rr
    // or Rd+1, Rr+1
    def ORWRdRr : Pseudo<(outs DREGS:$rd),
                         (ins DREGS:$src, DREGS:$rr),
                         "orw\t$rd, $rr",
                         [(set i16:$rd, (or i16:$src, i16:$rr)),
                          (implicit SREG)]>;

    def EORRdRr : FRdRr<0b0010,
                        0b01,
                        (outs GPR8:$rd),
                        (ins GPR8:$src, GPR8:$rr),
                        "eor\t$rd, $rr",
                        [(set i8:$rd, (xor i8:$src, i8:$rr)),
                         (implicit SREG)]>;

    // EORW Rd+1:Rd, Rr+1:Rr
    //
    // Expands to:
    // eor Rd,   Rr
    // eor Rd+1, Rr+1
    def EORWRdRr : Pseudo<(outs DREGS:$rd),
                          (ins DREGS:$src, DREGS:$rr),
                          "eorw\t$rd, $rr",
                          [(set i16:$rd, (xor i16:$src, i16:$rr)),
                           (implicit SREG)]>;
  }

  def ANDIRdK : FRdK<0b0111,
                     (outs LD8:$rd),
                     (ins LD8:$src, imm_ldi8:$k),
                     "andi\t$rd, $k",
                     [(set i8:$rd, (and i8:$src, imm:$k)),
                      (implicit SREG)]>;

  // ANDI Rd+1:Rd, K+1:K
  //
  // Expands to:
  // andi Rd,   K
  // andi Rd+1, K+1
  def ANDIWRdK : Pseudo<(outs DLDREGS:$rd),
                        (ins DLDREGS:$src, i16imm:$k),
                        "andiw\t$rd, $k",
                        [(set i16:$rd, (and i16:$src, imm:$k)),
                         (implicit SREG)]>;

  def ORIRdK : FRdK<0b0110,
                    (outs LD8:$rd),
                    (ins LD8:$src, imm_ldi8:$k),
                    "ori\t$rd, $k",
                    [(set i8:$rd, (or i8:$src, imm:$k)),
                     (implicit SREG)]>;

  // ORIW Rd+1:Rd, K+1,K
  //
  // Expands to:
  // ori Rd,   K
  // ori Rd+1, K+1
  def ORIWRdK : Pseudo<(outs DLDREGS:$rd),
                       (ins DLDREGS:$src, i16imm:$rr),
                       "oriw\t$rd, $rr",
                       [(set i16:$rd, (or i16:$src, imm:$rr)),
                        (implicit SREG)]>;
}

//===----------------------------------------------------------------------===//
// One's/Two's Complement
//===----------------------------------------------------------------------===//
let Constraints = "$src = $rd",
Defs = [SREG] in
{
  def COMRd : FRd<0b1001,
                  0b0100000,
                  (outs GPR8:$rd),
                  (ins GPR8:$src),
                  "com\t$rd",
                  [(set i8:$rd, (not i8:$src)), (implicit SREG)]>;

  // COMW Rd+1:Rd
  //
  // Expands to:
  // com Rd
  // com Rd+1
  def COMWRd : Pseudo<(outs DREGS:$rd),
                      (ins DREGS:$src),
                      "comw\t$rd",
                      [(set i16:$rd, (not i16:$src)), (implicit SREG)]>;

  def NEGRd : FRd<0b1001,
                  0b0100001,
                  (outs GPR8:$rd),
                  (ins GPR8:$src),
                  "neg\t$rd",
                  [(set i8:$rd, (ineg i8:$src)), (implicit SREG)]>;

  // NEGW Rd+1:Rd
  //
  // Expands to:
  // neg Rd+1
  // neg Rd
  // sbc Rd+1, r1
  def NEGWRd : Pseudo<(outs DREGS:$rd),
                      (ins DREGS:$src),
                      "negw\t$rd",
                      [(set i16:$rd, (ineg i16:$src)), (implicit SREG)]>;
}

// TST Rd
// Test for zero of minus.
// This operation is identical to a `Rd AND Rd`.
def : InstAlias<"tst\t$rd", (ANDRdRr GPR8:$rd, GPR8:$rd)>;

// SBR Rd, K
//
// Mnemonic alias to 'ORI Rd, K'. Same bit pattern, same operands,
// same everything.
def : InstAlias<"sbr\t$rd, $k",
                (ORIRdK LD8:$rd, imm_ldi8:$k),
                /* Disable display, so we don't override ORI */ 0>;

//===----------------------------------------------------------------------===//
// Jump instructions
//===----------------------------------------------------------------------===//
let isBarrier = 1,
isBranch = 1,
isTerminator = 1 in
{
  def RJMPk : FBRk<0,
                   (outs),
                   (ins brtarget_13:$target),
                   "rjmp\t$target",
                   [(br bb:$target)]>;

  let isIndirectBranch = 1,
  Uses = [R31R30] in
  def IJMP : F16<0b1001010000001001,
                 (outs),
                 (ins),
                 "ijmp",
                 []>,
             Requires<[HasIJMPCALL]>;

  let isIndirectBranch = 1,
  Uses = [R31R30] in
  def EIJMP : F16<0b1001010000011001,
                  (outs),
                  (ins),
                  "eijmp",
                  []>,
              Requires<[HasEIJMPCALL]>;

  def JMPk : F32BRk<0b110,
                    (outs),
                    (ins call_target:$k),
                    "jmp\t$k",
                    []>,
             Requires<[HasJMPCALL]>;
}

//===----------------------------------------------------------------------===//
// Call instructions
//===----------------------------------------------------------------------===//
let isCall = 1 in
{
  // SP is marked as a use to prevent stack-pointer assignments that appear
  // immediately before calls from potentially appearing dead.
  let Uses = [SP] in
  def RCALLk : FBRk<1,
                    (outs),
                    (ins brtarget_13:$target),
                    "rcall\t$target",
                    []>;

  // SP is marked as a use to prevent stack-pointer assignments that appear
  // immediately before calls from potentially appearing dead.
  let Uses = [SP, R31R30] in
  def ICALL : F16<0b1001010100001001,
                  (outs),
                  (ins variable_ops),
                  "icall",
                  []>,
              Requires<[HasIJMPCALL]>;

  // SP is marked as a use to prevent stack-pointer assignments that appear
  // immediately before calls from potentially appearing dead.
  let Uses = [SP, R31R30] in
  def EICALL : F16<0b1001010100011001,
                   (outs),
                   (ins variable_ops),
                   "eicall",
                   []>,
               Requires<[HasEIJMPCALL]>;

  // SP is marked as a use to prevent stack-pointer assignments that appear
  // immediately before calls from potentially appearing dead.
  //
  //:TODO: the imm field can be either 16 or 22 bits in devices with more
  // than 64k of ROM, fix it once we support the largest devices.
  let Uses = [SP] in
  def CALLk : F32BRk<0b111,
                     (outs),
                     (ins call_target:$k),
                     "call\t$k",
                     [(AVRcall imm:$k)]>,
              Requires<[HasJMPCALL]>;
}

//===----------------------------------------------------------------------===//
// Return instructions.
//===----------------------------------------------------------------------===//
let isTerminator = 1,
isReturn = 1,
isBarrier = 1 in
{
  def RET : F16<0b1001010100001000,
                (outs),
                (ins),
                "ret",
                [(AVRretflag)]>;

  def RETI : F16<0b1001010100011000,
                 (outs),
                 (ins),
                 "reti",
                 [(AVRretiflag)]>;
}

//===----------------------------------------------------------------------===//
// Compare operations.
//===----------------------------------------------------------------------===//
let Defs = [SREG] in
{
  // CPSE Rd, Rr
  // Compare Rd and Rr, skipping the next instruction if they are equal.
  let isBarrier = 1,
  isBranch = 1,
  isTerminator = 1 in
  def CPSE : FRdRr<0b0001,
                   0b00,
                   (outs),
                   (ins GPR8:$rd, GPR8:$rr),
                   "cpse\t$rd, $rr",
                   []>;

  def CPRdRr : FRdRr<0b0001,
                     0b01,
                     (outs),
                     (ins GPR8:$rd, GPR8:$rr),
                     "cp\t$rd, $rr",
                     [(AVRcmp i8:$rd, i8:$rr), (implicit SREG)]>;

  // CPW Rd+1:Rd, Rr+1:Rr
  //
  // Expands to:
  // cp  Rd,   Rr
  // cpc Rd+1, Rr+1
  def CPWRdRr : Pseudo<(outs),
                       (ins DREGS:$src, DREGS:$src2),
                       "cpw\t$src, $src2",
                       [(AVRcmp i16:$src, i16:$src2), (implicit SREG)]>;

  let Uses = [SREG] in
  def CPCRdRr : FRdRr<0b0000,
                      0b01,
                      (outs),
                      (ins GPR8:$rd, GPR8:$rr),
                      "cpc\t$rd, $rr",
                      [(AVRcmpc i8:$rd, i8:$rr), (implicit SREG)]>;

  // CPCW Rd+1:Rd. Rr+1:Rr
  //
  // Expands to:
  // cpc Rd,   Rr
  // cpc Rd+1, Rr+1
  let Uses = [SREG] in
  def CPCWRdRr : Pseudo<(outs),
                        (ins DREGS:$src, DREGS:$src2),
                        "cpcw\t$src, $src2",
                        [(AVRcmpc i16:$src, i16:$src2), (implicit SREG)]>;

  // CPI Rd, K
  // Compares a register with an 8 bit immediate.
  def CPIRdK : FRdK<0b0011,
                    (outs),
                    (ins LD8:$rd, imm_ldi8:$k),
                    "cpi\t$rd, $k",
                    [(AVRcmp i8:$rd, imm:$k), (implicit SREG)]>;
}

//===----------------------------------------------------------------------===//
// Register conditional skipping/branching operations.
//===----------------------------------------------------------------------===//
let isBranch = 1,
isTerminator = 1 in
{
  // Conditional skipping on GPR register bits, and
  // conditional skipping on IO register bits.
  let isBarrier = 1 in
  {
    def SBRCRrB : FRdB<0b10,
                       (outs),
                       (ins GPR8:$rr, i8imm:$b),
                       "sbrc\t$rr, $b",
                       []>;

    def SBRSRrB : FRdB<0b11,
                       (outs),
                       (ins GPR8:$rr, i8imm:$b),
                       "sbrs\t$rr, $b",
                       []>;

    def SBICAb : FIOBIT<0b01,
                        (outs),
                        (ins imm_port5:$a, i8imm:$b),
                        "sbic\t$a, $b",
                        []>;

    def SBISAb : FIOBIT<0b11,
                        (outs),
                        (ins imm_port5:$a, i8imm:$b),
                        "sbis\t$a, $b",
                        []>;
  }

  // Relative branches on status flag bits.
  let Uses = [SREG] in
  {
    // BRBS s, k
    // Branch if `s` flag in status register is set.
    def BRBSsk : FSK<0,
                     (outs),
                     (ins i8imm:$s, relbrtarget_7:$k),
                     "brbs\t$s, $k",
                     []>;

    // BRBC s, k
    // Branch if `s` flag in status register is clear.
    def BRBCsk : FSK<1,
                     (outs),
                     (ins i8imm:$s, relbrtarget_7:$k),
                     "brbc\t$s, $k",
                     []>;
  }
}


// BRCS k
// Branch if carry flag is set
def : InstAlias<"brcs\t$k", (BRBSsk 0, relbrtarget_7:$k)>;

// BRCC k
// Branch if carry flag is clear
def : InstAlias<"brcc\t$k", (BRBCsk 0, relbrtarget_7:$k)>;

// BRHS k
// Branch if half carry flag is set
def : InstAlias<"brhs\t$k", (BRBSsk 5, relbrtarget_7:$k)>;

// BRHC k
// Branch if half carry flag is clear
def : InstAlias<"brhc\t$k", (BRBCsk 5, relbrtarget_7:$k)>;

// BRTS k
// Branch if the T flag is set
def : InstAlias<"brts\t$k", (BRBSsk 6, relbrtarget_7:$k)>;

// BRTC k
// Branch if the T flag is clear
def : InstAlias<"brtc\t$k", (BRBCsk 6, relbrtarget_7:$k)>;

// BRVS k
// Branch if the overflow flag is set
def : InstAlias<"brvs\t$k", (BRBSsk 3, relbrtarget_7:$k)>;

// BRVC k
// Branch if the overflow flag is clear
def : InstAlias<"brvc\t$k", (BRBCsk 3, relbrtarget_7:$k)>;

// BRIE k
// Branch if the global interrupt flag is enabled
def : InstAlias<"brie\t$k", (BRBSsk 7, relbrtarget_7:$k)>;

// BRID k
// Branch if the global interrupt flag is disabled
def : InstAlias<"brid\t$k", (BRBCsk 7, relbrtarget_7:$k)>;

//===----------------------------------------------------------------------===//
// PC-relative conditional branches
//===----------------------------------------------------------------------===//
// Based on status register. We cannot simplify these into instruction aliases
// because we also need to be able to specify a pattern to match for ISel.
let isBranch = 1,
isTerminator = 1,
Uses = [SREG] in
{
  def BREQk : FBRsk<0,
                    0b001,
                    (outs),
                    (ins relbrtarget_7:$target),
                    "breq\t$target",
                    [(AVRbrcond bb:$target, AVR_COND_EQ)]>;

  def BRNEk : FBRsk<1,
                    0b001,
                    (outs),
                    (ins relbrtarget_7:$target),
                    "brne\t$target",
                    [(AVRbrcond bb:$target, AVR_COND_NE)]>;


  def BRSHk : FBRsk<1,
                    0b000,
                    (outs),
                    (ins relbrtarget_7:$target),
                    "brsh\t$target",
                    [(AVRbrcond bb:$target, AVR_COND_SH)]>;

  def BRLOk : FBRsk<0,
                    0b000,
                    (outs),
                    (ins relbrtarget_7:$target),
                    "brlo\t$target",
                    [(AVRbrcond bb:$target, AVR_COND_LO)]>;

  def BRMIk : FBRsk<0,
                    0b010,
                    (outs),
                    (ins relbrtarget_7:$target),
                    "brmi\t$target",
                    [(AVRbrcond bb:$target, AVR_COND_MI)]>;

  def BRPLk : FBRsk<1,
                    0b010,
                    (outs),
                    (ins relbrtarget_7:$target),
                    "brpl\t$target",
                    [(AVRbrcond bb:$target, AVR_COND_PL)]>;

  def BRGEk : FBRsk<1,
                    0b100,
                    (outs),
                    (ins relbrtarget_7:$target),
                    "brge\t$target",
                    [(AVRbrcond bb:$target, AVR_COND_GE)]>;

  def BRLTk : FBRsk<0,
                    0b100,
                    (outs),
                    (ins relbrtarget_7:$target),
                    "brlt\t$target",
                    [(AVRbrcond bb:$target, AVR_COND_LT)]>;
}

//===----------------------------------------------------------------------===//
// Data transfer instructions
//===----------------------------------------------------------------------===//
// 8 and 16-bit register move instructions.
let hasSideEffects = 0 in
{
  def MOVRdRr : FRdRr<0b0010,
                      0b11,
                      (outs GPR8:$rd),
                      (ins GPR8:$rr),
                      "mov\t$rd, $rr",
                      []>;

  def MOVWRdRr : FMOVWRdRr<(outs DREGS:$dst),
                           (ins DREGS:$src),
                           "movw\t$dst, $src",
                           []>,
                 Requires<[HasMOVW]>;
}

// Load immediate values into registers.
let isReMaterializable = 1 in
{
  def LDIRdK : FRdK<0b1110,
                    (outs LD8:$rd),
                    (ins imm_ldi8:$k),
                    "ldi\t$rd, $k",
                    [(set i8:$rd, imm:$k)]>;

  // LDIW Rd+1:Rd, K+1:K
  //
  // Expands to:
  // ldi Rd,   K
  // ldi Rd+1, K+1
  def LDIWRdK : Pseudo<(outs DLDREGS:$dst),
                       (ins i16imm:$src),
                       "ldiw\t$dst, $src",
                       [(set i16:$dst, imm:$src)]>;
}

// Load from data space into register.
let canFoldAsLoad = 1,
isReMaterializable = 1 in
{
  def LDSRdK : F32DM<0b0,
                     (outs GPR8:$rd),
                     (ins imm16:$k),
                     "lds\t$rd, $k",
                     [(set i8:$rd, (load imm:$k))]>,
               Requires<[HasSRAM]>;

  // LDSW Rd+1:Rd, K+1:K
  //
  // Expands to:
  // lds Rd,  (K+1:K)
  // lds Rd+1 (K+1:K) + 1
  def LDSWRdK : Pseudo<(outs DREGS:$dst),
                       (ins i16imm:$src),
                       "ldsw\t$dst, $src",
                       [(set i16:$dst, (load imm:$src))]>,
                Requires<[HasSRAM]>;
}

// Indirect loads.
let canFoldAsLoad = 1,
isReMaterializable = 1 in
{
  def LDRdPtr : FSTLD<0,
                      0b00,
                      (outs GPR8:$reg),
                      (ins LDSTPtrReg:$ptrreg),
                      "ld\t$reg, $ptrreg",
                      [(set GPR8:$reg, (load i16:$ptrreg))]>,
                Requires<[HasSRAM]>;

  // LDW Rd+1:Rd, P
  //
  // Expands to:
  // ld  Rd,   P
  // ldd Rd+1, P+1
  let Constraints = "@earlyclobber $reg" in
  def LDWRdPtr : Pseudo<(outs DREGS:$reg),
                        (ins PTRDISPREGS:$ptrreg),
                        "ldw\t$reg, $ptrreg",
                        [(set i16:$reg, (load i16:$ptrreg))]>,
                 Requires<[HasSRAM]>;
}

// Indirect loads (with postincrement or predecrement).
let mayLoad = 1,
hasSideEffects = 0,
Constraints = "$ptrreg = $base_wb,@earlyclobber $reg" in
{
  def LDRdPtrPi : FSTLD<0,
                        0b01,
                        (outs GPR8:$reg, PTRREGS:$base_wb),
                        (ins LDSTPtrReg:$ptrreg),
                        "ld\t$reg, $ptrreg+",
                        []>,
                  Requires<[HasSRAM]>;

  // LDW Rd+1:Rd, P+
  // Expands to:
  // ld Rd,   P+
  // ld Rd+1, P+
  def LDWRdPtrPi : Pseudo<(outs DREGS:$reg, PTRREGS:$base_wb),
                          (ins PTRREGS:$ptrreg),
                          "ldw\t$reg, $ptrreg+",
                          []>,
                   Requires<[HasSRAM]>;

  def LDRdPtrPd : FSTLD<0,
                        0b10,
                        (outs GPR8:$reg, PTRREGS:$base_wb),
                        (ins LDSTPtrReg:$ptrreg),
                        "ld\t$reg, -$ptrreg",
                        []>,
                  Requires<[HasSRAM]>;

  // LDW Rd+1:Rd, -P
  //
  // Expands to:
  // ld Rd+1, -P
  // ld Rd,   -P
  def LDWRdPtrPd : Pseudo<(outs DREGS:$reg, PTRREGS:$base_wb),
                          (ins PTRREGS:$ptrreg),
                          "ldw\t$reg, -$ptrreg",
                          []>,
                   Requires<[HasSRAM]>;
}

// Load indirect with displacement operations.
let canFoldAsLoad = 1,
isReMaterializable = 1 in
{
  let Constraints = "@earlyclobber $reg" in
  def LDDRdPtrQ : FSTDLDD<0,
                          (outs GPR8:$reg),
                          (ins memri:$memri),
                          "ldd\t$reg, $memri",
                          [(set i8:$reg, (load addr:$memri))]>,
                  Requires<[HasSRAM]>;

  // LDDW Rd+1:Rd, P+q
  //
  // Expands to:
  // ldd Rd,   P+q
  // ldd Rd+1, P+q+1
  let Constraints = "@earlyclobber $dst" in
  def LDDWRdPtrQ : Pseudo<(outs DREGS_WITHOUT_YZ_WORKAROUND:$dst),
                          (ins memri:$memri),
                          "lddw\t$dst, $memri",
                          [(set i16:$dst, (load addr:$memri))]>,
                   Requires<[HasSRAM]>;

  // An identical pseudo instruction to LDDWRdPtrQ, expect restricted to the Y
  // register and without the @earlyclobber flag.
  //
  // Used to work around a bug caused by the register allocator not
  // being able to handle the expansion of a COPY into an machine instruction
  // that has an earlyclobber flag. This is because the register allocator will
  // try expand a copy from a register slot into an earlyclobber instruction.
  // Instructions that are earlyclobber need to be in a dedicated earlyclobber slot.
  //
  // This pseudo instruction can be used pre-AVR pseudo expansion in order to
  // get a frame index load without directly using earlyclobber instructions.
  //
  // The pseudo expansion pass trivially expands this into LDDWRdPtrQ.
  //
  // This instruction may be removed once PR13375 is fixed.
  let mayLoad = 1,
  hasSideEffects = 0 in
  def LDDWRdYQ : Pseudo<(outs DREGS:$dst),
                        (ins memri:$memri),
                        "lddw\t$dst, $memri",
                        []>,
                 Requires<[HasSRAM]>;
}

class AtomicLoad<PatFrag Op, RegisterClass DRC,
                 RegisterClass PTRRC> :
  Pseudo<(outs DRC:$rd), (ins PTRRC:$rr), "atomic_op",
         [(set DRC:$rd, (Op i16:$rr))]>;

class AtomicStore<PatFrag Op, RegisterClass DRC,
                  RegisterClass PTRRC> :
  Pseudo<(outs), (ins PTRRC:$rd, DRC:$rr), "atomic_op",
         [(Op i16:$rd, DRC:$rr)]>;

class AtomicLoadOp<PatFrag Op, RegisterClass DRC,
                   RegisterClass PTRRC> :
  Pseudo<(outs DRC:$rd), (ins PTRRC:$rr, DRC:$operand),
         "atomic_op",
         [(set DRC:$rd, (Op i16:$rr, DRC:$operand))]>;

// FIXME: I think 16-bit atomic binary ops need to mark
// r0 as clobbered.

// Atomic instructions
// ===================
//
// These are all expanded by AVRExpandPseudoInsts
//
// 8-bit operations can use any pointer register because
// they are expanded directly into an LD/ST instruction.
//
// 16-bit operations use 16-bit load/store postincrement instructions,
// which require PTRDISPREGS.

def AtomicLoad8   : AtomicLoad<atomic_load_8, GPR8, PTRREGS>;
def AtomicLoad16  : AtomicLoad<atomic_load_16, DREGS, PTRDISPREGS>;

def AtomicStore8  : AtomicStore<atomic_store_8, GPR8, PTRREGS>;
def AtomicStore16 : AtomicStore<atomic_store_16, DREGS, PTRDISPREGS>;

class AtomicLoadOp8<PatFrag Op> : AtomicLoadOp<Op, GPR8, PTRREGS>;
class AtomicLoadOp16<PatFrag Op> : AtomicLoadOp<Op, DREGS, PTRDISPREGS>;

def AtomicLoadAdd8  : AtomicLoadOp8<atomic_load_add_8>;
def AtomicLoadAdd16 : AtomicLoadOp16<atomic_load_add_16>;
def AtomicLoadSub8  : AtomicLoadOp8<atomic_load_sub_8>;
def AtomicLoadSub16 : AtomicLoadOp16<atomic_load_sub_16>;
def AtomicLoadAnd8  : AtomicLoadOp8<atomic_load_and_8>;
def AtomicLoadAnd16 : AtomicLoadOp16<atomic_load_and_16>;
def AtomicLoadOr8   : AtomicLoadOp8<atomic_load_or_8>;
def AtomicLoadOr16  : AtomicLoadOp16<atomic_load_or_16>;
def AtomicLoadXor8  : AtomicLoadOp8<atomic_load_xor_8>;
def AtomicLoadXor16 : AtomicLoadOp16<atomic_load_xor_16>;
def AtomicFence     : Pseudo<(outs), (ins), "atomic_fence",
                             [(atomic_fence timm, timm)]>;

// Indirect store from register to data space.
def STSKRr : F32DM<0b1,
                   (outs),
                   (ins imm16:$k, GPR8:$rd),
                   "sts\t$k, $rd",
                   [(store i8:$rd, imm:$k)]>,
             Requires<[HasSRAM]>;

// STSW K+1:K, Rr+1:Rr
//
// Expands to:
// sts Rr+1, (K+1:K) + 1
// sts Rr,   (K+1:K)
def STSWKRr : Pseudo<(outs),
                     (ins i16imm:$dst, DREGS:$src),
                     "stsw\t$dst, $src",
                     [(store i16:$src, imm:$dst)]>,
              Requires<[HasSRAM]>;

// Indirect stores.
// ST P, Rr
// Stores the value of Rr into the location addressed by pointer P.
def STPtrRr : FSTLD<1,
                    0b00,
                    (outs),
                    (ins LDSTPtrReg:$ptrreg, GPR8:$reg),
                    "st\t$ptrreg, $reg",
                    [(store GPR8:$reg, i16:$ptrreg)]>,
              Requires<[HasSRAM]>;

// STW P, Rr+1:Rr
// Stores the value of Rr into the location addressed by pointer P.
//
// Expands to:
// st P, Rr
// std P+1, Rr+1
def STWPtrRr : Pseudo<(outs),
                      (ins PTRDISPREGS:$ptrreg, DREGS:$reg),
                      "stw\t$ptrreg, $reg",
                      [(store i16:$reg, i16:$ptrreg)]>,
               Requires<[HasSRAM]>;

// Indirect stores (with postincrement or predecrement).
let Constraints = "$ptrreg = $base_wb,@earlyclobber $base_wb" in
{

  // ST P+, Rr
  // Stores the value of Rr into the location addressed by pointer P.
  // Post increments P.
  def STPtrPiRr : FSTLD<1,
                        0b01,
                        (outs LDSTPtrReg:$base_wb),
                        (ins LDSTPtrReg:$ptrreg, GPR8:$reg, i8imm:$offs),
                        "st\t$ptrreg+, $reg",
                        [(set i16:$base_wb,
                         (post_store GPR8:$reg, i16:$ptrreg, imm:$offs))]>,
                  Requires<[HasSRAM]>;

  // STW P+, Rr+1:Rr
  // Stores the value of Rr into the location addressed by pointer P.
  // Post increments P.
  //
  // Expands to:
  // st P+, Rr
  // st P+, Rr+1
  def STWPtrPiRr : Pseudo<(outs PTRREGS:$base_wb),
                          (ins PTRREGS:$ptrreg, DREGS:$trh, i8imm:$offs),
                          "stw\t$ptrreg+, $trh",
                          [(set PTRREGS:$base_wb,
                           (post_store DREGS:$trh, PTRREGS:$ptrreg, imm:$offs))]>,
                   Requires<[HasSRAM]>;

  // ST -P, Rr
  // Stores the value of Rr into the location addressed by pointer P.
  // Pre decrements P.
  def STPtrPdRr : FSTLD<1,
                        0b10,
                        (outs LDSTPtrReg:$base_wb),
                        (ins LDSTPtrReg:$ptrreg, GPR8:$reg, i8imm:$offs),
                        "st\t-$ptrreg, $reg",
                        [(set i16:$base_wb,
                         (pre_store GPR8:$reg, i16:$ptrreg, imm:$offs))]>,
                  Requires<[HasSRAM]>;

  // STW -P, Rr+1:Rr
  // Stores the value of Rr into the location addressed by pointer P.
  // Pre decrements P.
  //
  // Expands to:
  // st -P, Rr+1
  // st -P, Rr
  def STWPtrPdRr : Pseudo<(outs PTRREGS:$base_wb),
                          (ins PTRREGS:$ptrreg, DREGS:$reg, i8imm:$offs),
                          "stw\t-$ptrreg, $reg",
                          [(set PTRREGS:$base_wb,
                           (pre_store i16:$reg, i16:$ptrreg, imm:$offs))]>,
                   Requires<[HasSRAM]>;
}

// Store indirect with displacement operations.
// STD P+q, Rr
// Stores the value of Rr into the location addressed by pointer P with a
// displacement of q. Does not modify P.
def STDPtrQRr : FSTDLDD<1,
                        (outs),
                        (ins memri:$memri, GPR8:$reg),
                        "std\t$memri, $reg",
                        [(store i8:$reg, addr:$memri)]>,
                Requires<[HasSRAM]>;

// STDW P+q, Rr+1:Rr
// Stores the value of Rr into the location addressed by pointer P with a
// displacement of q. Does not modify P.
//
// Expands to:
// std P+q,   Rr
// std P+q+1, Rr+1
def STDWPtrQRr : Pseudo<(outs),
                        (ins memri:$memri, DREGS:$src),
                        "stdw\t$memri, $src",
                        [(store i16:$src, addr:$memri)]>,
                 Requires<[HasSRAM]>;


// Load program memory operations.
let canFoldAsLoad = 1,
isReMaterializable = 1,
mayLoad = 1,
hasSideEffects = 0 in
{
  let Defs = [R0],
      Uses = [R31R30] in
  def LPM : F16<0b1001010111001000,
                (outs),
                (ins),
                "lpm",
                []>,
            Requires<[HasLPM]>;

  def LPMRdZ : FLPMX<0,
                     0,
                     (outs GPR8:$dst),
                     (ins ZREG:$z),
                     "lpm\t$dst, $z",
                     []>,
               Requires<[HasLPMX]>;

  // Load program memory, while postincrementing the Z register.
  let Defs = [R31R30] in
  {
    def LPMRdZPi : FLPMX<0,
                         1,
                         (outs GPR8:$dst),
                         (ins ZREG:$z),
                         "lpm\t$dst, $z+",
                         []>,
                   Requires<[HasLPMX]>;

    def LPMWRdZ : Pseudo<(outs DREGS:$dst),
                         (ins ZREG:$z),
                         "lpmw\t$dst, $z",
                         []>,
                  Requires<[HasLPMX]>;

    def LPMWRdZPi : Pseudo<(outs DREGS:$dst),
                           (ins ZREG:$z),
                           "lpmw\t$dst, $z+",
                           []>,
                    Requires<[HasLPMX]>;
  }
}

// Extended load program memory operations.
let mayLoad = 1,
hasSideEffects = 0 in
{
  let Defs = [R0],
      Uses = [R31R30] in
  def ELPM : F16<0b1001010111011000,
                 (outs),
                 (ins),
                 "elpm",
                 []>,
             Requires<[HasELPM]>;

  def ELPMRdZ : FLPMX<1,
                      0,
                      (outs GPR8:$dst),
                      (ins ZREG:$z),
                      "elpm\t$dst, $z",
                      []>,
                Requires<[HasELPMX]>;

  let Defs = [R31R30] in
  def ELPMRdZPi : FLPMX<1,
                        1,
                        (outs GPR8:$dst),
                        (ins ZREG: $z),
                        "elpm\t$dst, $z+",
                        []>,
                  Requires<[HasELPMX]>;
}

// Store program memory operations.
let Uses = [R1, R0] in
{
  let Uses = [R31R30, R1, R0] in
  def SPM : F16<0b1001010111101000,
                (outs),
                (ins),
                "spm",
                []>,
            Requires<[HasSPM]>;

  let Defs = [R31R30] in
  def SPMZPi : F16<0b1001010111111000,
                   (outs),
                   (ins ZREG:$z),
                   "spm $z+",
                   []>,
               Requires<[HasSPMX]>;
}

// Read data from IO location operations.
let canFoldAsLoad = 1,
isReMaterializable = 1 in
{
  def INRdA : FIORdA<(outs GPR8:$dst),
                     (ins imm_port6:$src),
                     "in\t$dst, $src",
                     [(set i8:$dst, (load ioaddr8:$src))]>;

  def INWRdA : Pseudo<(outs DREGS:$dst),
                      (ins imm_port6:$src),
                      "inw\t$dst, $src",
                      [(set i16:$dst, (load ioaddr16:$src))]>;
}

// Write data to IO location operations.
def OUTARr : FIOARr<(outs),
                    (ins imm_port6:$dst, GPR8:$src),
                    "out\t$dst, $src",
                    [(store i8:$src, ioaddr8:$dst)]>;

def OUTWARr : Pseudo<(outs),
                     (ins imm_port6:$dst, DREGS:$src),
                     "outw\t$dst, $src",
                     [(store i16:$src, ioaddr16:$dst)]>;

// Stack push/pop operations.
let Defs = [SP],
Uses = [SP],
hasSideEffects = 0 in
{
  // Stack push operations.
  let mayStore = 1 in
  {
    def PUSHRr : FRd<0b1001,
                     0b0011111,
                     (outs),
                     (ins GPR8:$reg),
                     "push\t$reg",
                     []>,
                 Requires<[HasSRAM]>;

    def PUSHWRr : Pseudo<(outs),
                         (ins DREGS:$reg),
                         "pushw\t$reg",
                         []>,
                  Requires<[HasSRAM]>;
  }

  // Stack pop operations.
  let mayLoad = 1 in
  {
    def POPRd : FRd<0b1001,
                    0b0001111,
                    (outs GPR8:$reg),
                    (ins),
                    "pop\t$reg",
                    []>,
                Requires<[HasSRAM]>;

    def POPWRd : Pseudo<(outs DREGS:$reg),
                        (ins),
                        "popw\t$reg",
                        []>,
                 Requires<[HasSRAM]>;
  }
}

// Read-Write-Modify (RMW) instructions.
def XCHZRd : FZRd<0b100,
                  (outs GPR8:$rd),
                  (ins ZREG:$z),
                  "xch\t$z, $rd",
                  []>,
             Requires<[SupportsRMW]>;

def LASZRd : FZRd<0b101,
                  (outs GPR8:$rd),
                  (ins ZREG:$z),
                  "las\t$z, $rd",
                  []>,
             Requires<[SupportsRMW]>;

def LACZRd : FZRd<0b110,
                  (outs GPR8:$rd),
                  (ins ZREG:$z),
                  "lac\t$z, $rd",
                  []>,
             Requires<[SupportsRMW]>;

def LATZRd : FZRd<0b111,
                  (outs GPR8:$rd),
                  (ins ZREG:$z),
                  "lat\t$z, $rd",
                  []>,
             Requires<[SupportsRMW]>;

//===----------------------------------------------------------------------===//
// Bit and bit-test instructions
//===----------------------------------------------------------------------===//

// Bit shift/rotate operations.
let Constraints = "$src = $rd",
Defs = [SREG] in
{
  // 8-bit LSL is an alias of ADD Rd, Rd

  def LSLWRd : Pseudo<(outs DREGS:$rd),
                      (ins DREGS:$src),
                      "lslw\t$rd",
                      [(set i16:$rd, (AVRlsl i16:$src)), (implicit SREG)]>;

  def LSLB7Rd : Pseudo<(outs GPR8:$rd),
                       (ins GPR8:$src),
                       "lslb7\t$rd",
                       [(set i8:$rd, (AVRlsl7 i8:$src)), (implicit SREG)]>;

  def LSLW4Rd : Pseudo<(outs DLDREGS:$rd),
                       (ins DREGS:$src),
                       "lslw4\t$rd",
                       [(set i16:$rd, (AVRlsl4 i16:$src)), (implicit SREG)]>;

  def LSLW8Rd : Pseudo<(outs DREGS:$rd),
                       (ins DREGS:$src),
                       "lslw8\t$rd",
                       [(set i16:$rd, (AVRlsl8 i16:$src)), (implicit SREG)]>;

  def LSLW12Rd : Pseudo<(outs DLDREGS:$rd),
                       (ins DREGS:$src),
                       "lslw12\t$rd",
                       [(set i16:$rd, (AVRlsl12 i16:$src)), (implicit SREG)]>;

  def LSRRd : FRd<0b1001,
                  0b0100110,
                  (outs GPR8:$rd),
                  (ins GPR8:$src),
                  "lsr\t$rd",
                  [(set i8:$rd, (AVRlsr i8:$src)), (implicit SREG)]>;

  def LSRB7Rd : Pseudo<(outs GPR8:$rd),
                       (ins GPR8:$src),
                       "lsrb7\t$rd",
                       [(set i8:$rd, (AVRlsr7 i8:$src)), (implicit SREG)]>;

  def LSRWRd : Pseudo<(outs DREGS:$rd),
                      (ins DREGS:$src),
                      "lsrw\t$rd",
                      [(set i16:$rd, (AVRlsr i16:$src)), (implicit SREG)]>;

  def LSRW4Rd : Pseudo<(outs DLDREGS:$rd),
                       (ins DREGS:$src),
                       "lsrw4\t$rd",
                       [(set i16:$rd, (AVRlsr4 i16:$src)), (implicit SREG)]>;

  def LSRW8Rd : Pseudo<(outs DREGS:$rd),
                       (ins DREGS:$src),
                       "lsrw8\t$rd",
                       [(set i16:$rd, (AVRlsr8 i16:$src)), (implicit SREG)]>;

  def LSRW12Rd : Pseudo<(outs DLDREGS:$rd),
                       (ins DREGS:$src),
                       "lsrw12\t$rd",
                       [(set i16:$rd, (AVRlsr12 i16:$src)), (implicit SREG)]>;

  def ASRRd : FRd<0b1001,
                  0b0100101,
                  (outs GPR8:$rd),
                  (ins GPR8:$src),
                  "asr\t$rd",
                  [(set i8:$rd, (AVRasr i8:$src)), (implicit SREG)]>;

  def ASRB7Rd : Pseudo<(outs GPR8:$rd),
                       (ins GPR8:$src),
                       "asrb7\t$rd",
                       [(set i8:$rd, (AVRasr7 i8:$src)), (implicit SREG)]>;

  def ASRWRd : Pseudo<(outs DREGS:$rd),
                      (ins DREGS:$src),
                      "asrw\t$rd",
                      [(set i16:$rd, (AVRasr i16:$src)), (implicit SREG)]>;

  def ASRW8Rd : Pseudo<(outs DREGS:$rd),
                       (ins DREGS:$src),
                       "asrw8\t$rd",
                       [(set i16:$rd, (AVRasr8 i16:$src)), (implicit SREG)]>;

  // Bit rotate operations.
  let Uses = [SREG] in
  {
    // 8-bit ROL is an alias of ADC Rd, Rd

    def ROLBRd : Pseudo<(outs GPR8:$rd),
                        (ins GPR8:$src),
                        "rolb\t$rd",
                        [(set i8:$rd, (AVRrol i8:$src)), (implicit SREG)]>;

    def RORBRd : Pseudo<(outs GPR8:$rd),
                        (ins GPR8:$src),
                        "rorb\t$rd",
                        [(set i8:$rd, (AVRror i8:$src)), (implicit SREG)]>;

    def ROLWRd : Pseudo<(outs DREGS:$rd),
                        (ins DREGS:$src),
                        "rolw\t$rd",
                        [(set i16:$rd, (AVRrol i16:$src)), (implicit SREG)]>;

    def RORRd : FRd<0b1001,
                    0b0100111,
                    (outs GPR8:$rd),
                    (ins GPR8:$src),
                    "ror\t$rd",
                    []>;

    def RORWRd : Pseudo<(outs DREGS:$rd),
                        (ins DREGS:$src),
                        "rorw\t$rd",
                        [(set i16:$rd, (AVRror i16:$src)), (implicit SREG)]>;
  }
}

// SWAP Rd
// Swaps the high and low nibbles in a register.
let Constraints = "$src = $rd" in
def SWAPRd : FRd<0b1001,
                 0b0100010,
                 (outs GPR8:$rd),
                 (ins GPR8:$src),
                 "swap\t$rd",
                 [(set i8:$rd, (AVRSwap i8:$src))]>;

// IO register bit set/clear operations.
//:TODO: add patterns when popcount(imm)==2 to be expanded with 2 sbi/cbi
// instead of in+ori+out which requires one more instr.
def SBIAb : FIOBIT<0b10,
                   (outs),
                   (ins imm_port5:$addr, i8imm:$bit),
                   "sbi\t$addr, $bit",
                   [(store (or (i8 (load lowioaddr8:$addr)), iobitpos8:$bit),
                     lowioaddr8:$addr)]>;

def CBIAb : FIOBIT<0b00,
                   (outs),
                   (ins imm_port5:$addr, i8imm:$bit),
                   "cbi\t$addr, $bit",
                   [(store (and (i8 (load lowioaddr8:$addr)), iobitposn8:$bit),
                     lowioaddr8:$addr)]>;

// Status register bit load/store operations.
let Defs = [SREG] in
def BST : FRdB<0b01,
               (outs),
               (ins GPR8:$rd, i8imm:$b),
               "bst\t$rd, $b",
               []>;

let Uses = [SREG] in
def BLD : FRdB<0b00,
               (outs),
               (ins GPR8:$rd, i8imm:$b),
               "bld\t$rd, $b",
               []>;

def CBR : InstAlias<"cbr\t$rd, $k", (ANDIRdK LD8:$rd, imm_com8:$k), 0>;

// CLR Rd
// Alias for EOR Rd, Rd
// -------------
// Clears all bits in a register.
def CLR : InstAlias<"clr\t$rd", (EORRdRr GPR8:$rd, GPR8:$rd)>;

// LSL Rd
// Alias for ADD Rd, Rd
// --------------
// Logical shift left one bit.
def LSL : InstAlias<"lsl\t$rd", (ADDRdRr GPR8:$rd, GPR8:$rd)>;

def ROL : InstAlias<"rol\t$rd", (ADCRdRr GPR8:$rd, GPR8:$rd)>;

// SER Rd
// Alias for LDI Rd, 0xff
// ---------
// Sets all bits in a register.
def : InstAlias<"ser\t$rd", (LDIRdK LD8:$rd, 0xff), 0>;

let Defs = [SREG] in
def BSETs : FS<0,
               (outs),
               (ins i8imm:$s),
               "bset\t$s",
               []>;

let Defs = [SREG] in
def BCLRs : FS<1,
               (outs),
               (ins i8imm:$s),
               "bclr\t$s",
               []>;

// Set/clear aliases for the carry (C) status flag (bit 0).
def : InstAlias<"sec", (BSETs 0)>;
def : InstAlias<"clc", (BCLRs 0)>;

// Set/clear aliases for the zero (Z) status flag (bit 1).
def : InstAlias<"sez", (BSETs 1)>;
def : InstAlias<"clz", (BCLRs 1)>;

// Set/clear aliases for the negative (N) status flag (bit 2).
def : InstAlias<"sen", (BSETs 2)>;
def : InstAlias<"cln", (BCLRs 2)>;

// Set/clear aliases for the overflow (V) status flag (bit 3).
def : InstAlias<"sev", (BSETs 3)>;
def : InstAlias<"clv", (BCLRs 3)>;

// Set/clear aliases for the signed (S) status flag (bit 4).
def : InstAlias<"ses", (BSETs 4)>;
def : InstAlias<"cls", (BCLRs 4)>;

// Set/clear aliases for the half-carry (H) status flag (bit 5).
def : InstAlias<"seh", (BSETs 5)>;
def : InstAlias<"clh", (BCLRs 5)>;

// Set/clear aliases for the T status flag (bit 6).
def : InstAlias<"set", (BSETs 6)>;
def : InstAlias<"clt", (BCLRs 6)>;

// Set/clear aliases for the interrupt (I) status flag (bit 7).
def : InstAlias<"sei", (BSETs 7)>;
def : InstAlias<"cli", (BCLRs 7)>;

//===----------------------------------------------------------------------===//
// Special/Control instructions
//===----------------------------------------------------------------------===//

// BREAK
// Breakpoint instruction
// ---------
// <|1001|0101|1001|1000>
def BREAK : F16<0b1001010110011000,
                (outs),
                (ins),
                "break",
                []>,
            Requires<[HasBREAK]>;

// NOP
// No-operation instruction
// ---------
// <|0000|0000|0000|0000>
def NOP : F16<0b0000000000000000,
              (outs),
              (ins),
              "nop",
              []>;

// SLEEP
// Sleep instruction
// ---------
// <|1001|0101|1000|1000>
def SLEEP : F16<0b1001010110001000,
                (outs),
                (ins),
                "sleep",
                []>;

// WDR
// Watchdog reset
// ---------
// <|1001|0101|1010|1000>
def WDR : F16<0b1001010110101000,
              (outs),
              (ins),
              "wdr",
              []>;

//===----------------------------------------------------------------------===//
// Pseudo instructions for later expansion
//===----------------------------------------------------------------------===//

//:TODO: Optimize this for wider types AND optimize the following code
//       compile int foo(char a, char b, char c, char d) {return d+b;}
//       looks like a missed sext_inreg opportunity.
def SEXT : ExtensionPseudo<
  (outs DREGS:$dst),
  (ins GPR8:$src),
  "sext\t$dst, $src",
  [(set i16:$dst, (sext i8:$src)), (implicit SREG)]
>;

def ZEXT : ExtensionPseudo<
  (outs DREGS:$dst),
  (ins GPR8:$src),
  "zext\t$dst, $src",
  [(set i16:$dst, (zext i8:$src)), (implicit SREG)]
>;

// This pseudo gets expanded into a movw+adiw thus it clobbers SREG.
let Defs = [SREG],
    hasSideEffects = 0 in
def FRMIDX : Pseudo<(outs DLDREGS:$dst),
                    (ins DLDREGS:$src, i16imm:$src2),
                    "frmidx\t$dst, $src, $src2",
                    []>;

// This pseudo is either converted to a regular store or a push which clobbers
// SP.
def STDSPQRr : StorePseudo<
  (outs),
  (ins memspi:$dst, GPR8:$src),
  "stdstk\t$dst, $src",
  [(store i8:$src, addr:$dst)]
>;

// This pseudo is either converted to a regular store or a push which clobbers
// SP.
def STDWSPQRr : StorePseudo<
  (outs),
  (ins memspi:$dst, DREGS:$src),
  "stdwstk\t$dst, $src",
  [(store i16:$src, addr:$dst)]
>;

// SP read/write pseudos.
let hasSideEffects = 0 in
{
  let Uses = [SP] in
  def SPREAD : Pseudo<
    (outs DREGS:$dst),
    (ins GPRSP:$src),
    "spread\t$dst, $src",
    []
  >;

  let Defs = [SP] in
  def SPWRITE : Pseudo<
    (outs GPRSP:$dst),
    (ins DREGS:$src),
    "spwrite\t$dst, $src",
    []>;
}

def Select8 : SelectPseudo<
  (outs GPR8:$dst),
  (ins GPR8:$src, GPR8:$src2, i8imm:$cc),
  "# Select8 PSEUDO",
  [(set i8:$dst, (AVRselectcc i8:$src, i8:$src2, imm:$cc))]
>;

def Select16 : SelectPseudo<
  (outs DREGS:$dst),
  (ins DREGS:$src, DREGS:$src2, i8imm:$cc),
  "# Select16 PSEUDO",
  [(set i16:$dst, (AVRselectcc i16:$src, i16:$src2, imm:$cc))]
>;

def Lsl8 : ShiftPseudo<
  (outs GPR8:$dst),
  (ins GPR8:$src, GPR8:$cnt),
  "# Lsl8 PSEUDO",
  [(set i8:$dst, (AVRlslLoop i8:$src, i8:$cnt))]
>;

def Lsl16 : ShiftPseudo<
  (outs DREGS:$dst),
  (ins DREGS:$src, GPR8:$cnt),
  "# Lsl16 PSEUDO",
  [(set i16:$dst, (AVRlslLoop i16:$src, i8:$cnt))]
>;

def Lsr8 : ShiftPseudo<
  (outs GPR8:$dst),
  (ins GPR8:$src, GPR8:$cnt),
  "# Lsr8 PSEUDO",
  [(set i8:$dst, (AVRlsrLoop i8:$src, i8:$cnt))]
>;

def Lsr16 : ShiftPseudo<
  (outs DREGS:$dst),
   (ins DREGS:$src, GPR8:$cnt),
   "# Lsr16 PSEUDO",
   [(set i16:$dst, (AVRlsrLoop i16:$src, i8:$cnt))]
>;

def Rol8 : ShiftPseudo<
  (outs GPR8:$dst),
  (ins GPR8:$src, GPR8:$cnt),
  "# Rol8 PSEUDO",
  [(set i8:$dst, (AVRrolLoop i8:$src, i8:$cnt))]
>;

def Rol16 : ShiftPseudo<
  (outs DREGS:$dst),
  (ins DREGS:$src, GPR8:$cnt),
  "# Rol16 PSEUDO",
  [(set i16:$dst, (AVRrolLoop i16:$src, i8:$cnt))]
>;

def Ror8 : ShiftPseudo<
  (outs GPR8:$dst),
  (ins GPR8:$src, GPR8:$cnt),
  "# Ror8 PSEUDO",
  [(set i8:$dst, (AVRrorLoop i8:$src, i8:$cnt))]
>;

def Ror16 : ShiftPseudo<
  (outs DREGS:$dst),
  (ins DREGS:$src, GPR8:$cnt),
  "# Ror16 PSEUDO",
  [(set i16:$dst, (AVRrorLoop i16:$src, i8:$cnt))]
>;

def Asr8 : ShiftPseudo<
  (outs GPR8:$dst),
  (ins GPR8:$src, GPR8:$cnt),
  "# Asr8 PSEUDO",
  [(set i8:$dst, (AVRasrLoop i8:$src, i8:$cnt))]
>;

def Asr16 : ShiftPseudo<
  (outs DREGS:$dst),
   (ins DREGS:$src, GPR8:$cnt),
   "# Asr16 PSEUDO",
   [(set i16:$dst, (AVRasrLoop i16:$src, i8:$cnt))]
>;


//===----------------------------------------------------------------------===//
// Non-Instruction Patterns
//===----------------------------------------------------------------------===//

//:TODO: look in x86InstrCompiler.td for odd encoding trick related to
// add x, 128 -> sub x, -128. Clang is emitting an eor for this (ldi+eor)

// the add instruction always writes the carry flag
def : Pat<(addc i8:$src, i8:$src2),
          (ADDRdRr i8:$src, i8:$src2)>;
def : Pat<(addc DREGS:$src, DREGS:$src2),
          (ADDWRdRr DREGS:$src, DREGS:$src2)>;

// all sub instruction variants always writes the carry flag
def : Pat<(subc i8:$src, i8:$src2),
          (SUBRdRr i8:$src, i8:$src2)>;
def : Pat<(subc i16:$src, i16:$src2),
          (SUBWRdRr i16:$src, i16:$src2)>;
def : Pat<(subc i8:$src, imm:$src2),
          (SUBIRdK i8:$src, imm:$src2)>;
def : Pat<(subc i16:$src, imm:$src2),
          (SUBIWRdK i16:$src, imm:$src2)>;

// These patterns convert add (x, -imm) to sub (x, imm) since we dont have
// any add with imm instructions. Also take care of the adiw/sbiw instructions.
def : Pat<(add i16:$src1, imm0_63_neg:$src2),
          (SBIWRdK i16:$src1, (imm0_63_neg:$src2))>;
def : Pat<(add i16:$src1, imm:$src2),
          (SUBIWRdK i16:$src1, (imm16_neg_XFORM imm:$src2))>;
def : Pat<(addc i16:$src1, imm:$src2),
          (SUBIWRdK i16:$src1, (imm16_neg_XFORM imm:$src2))>;

def : Pat<(add i8:$src1, imm:$src2),
          (SUBIRdK i8:$src1, (imm8_neg_XFORM imm:$src2))>;
def : Pat<(addc i8:$src1, imm:$src2),
          (SUBIRdK i8:$src1, (imm8_neg_XFORM imm:$src2))>;
def : Pat<(adde i8:$src1, imm:$src2),
          (SBCIRdK i8:$src1, (imm8_neg_XFORM imm:$src2))>;

// Calls.
def : Pat<(AVRcall (i16 tglobaladdr:$dst)),
          (CALLk tglobaladdr:$dst)>;
def : Pat<(AVRcall (i16 texternalsym:$dst)),
          (CALLk texternalsym:$dst)>;

// `anyext`
def : Pat<(i16 (anyext i8:$src)),
          (INSERT_SUBREG (i16 (IMPLICIT_DEF)), i8:$src, sub_lo)>;

// `trunc`
def : Pat<(i8 (trunc i16:$src)),
          (EXTRACT_SUBREG i16:$src, sub_lo)>;

// sext_inreg
def : Pat<(sext_inreg i16:$src, i8),
          (SEXT (i8 (EXTRACT_SUBREG i16:$src, sub_lo)))>;

// GlobalAddress
def : Pat<(i16 (AVRWrapper tglobaladdr:$dst)),
          (LDIWRdK tglobaladdr:$dst)>;
def : Pat<(add i16:$src, (AVRWrapper tglobaladdr:$src2)),
          (SUBIWRdK i16:$src, tglobaladdr:$src2)>;
def : Pat<(i8 (load (AVRWrapper tglobaladdr:$dst))),
          (LDSRdK tglobaladdr:$dst)>;
def : Pat<(i16 (load (AVRWrapper tglobaladdr:$dst))),
          (LDSWRdK tglobaladdr:$dst)>;
def : Pat<(store i8:$src, (i16 (AVRWrapper tglobaladdr:$dst))),
          (STSKRr tglobaladdr:$dst, i8:$src)>;
def : Pat<(store i16:$src, (i16 (AVRWrapper tglobaladdr:$dst))),
          (STSWKRr tglobaladdr:$dst, i16:$src)>;

// BlockAddress
def : Pat<(i16 (AVRWrapper tblockaddress:$dst)),
          (LDIWRdK tblockaddress:$dst)>;

def : Pat<(i8 (trunc (AVRlsr8 DREGS:$src))),
          (EXTRACT_SUBREG DREGS:$src, sub_hi)>;

// :FIXME: DAGCombiner produces an shl node after legalization from these seq:
// BR_JT -> (mul x, 2) -> (shl x, 1)
def : Pat<(shl i16:$src1, (i8 1)),
          (LSLWRd i16:$src1)>;

// Lowering of 'tst' node to 'TST' instruction.
// TST is an alias of AND Rd, Rd.
def : Pat<(AVRtst i8:$rd),
          (ANDRdRr GPR8:$rd, GPR8:$rd)>;

// Lowering of 'lsl' node to 'LSL' instruction.
// LSL is an alias of 'ADD Rd, Rd'
def : Pat<(AVRlsl i8:$rd),
          (ADDRdRr GPR8:$rd, GPR8:$rd)>;