llvm-ar - LLVM archiver
=======================

.. program:: llvm-ar

SYNOPSIS
--------

:program:`llvm-ar` [-]{dmpqrstx}[abcDilLNoOPsSTuUvV] [relpos] [count] archive [files...]

DESCRIPTION
-----------

The :program:`llvm-ar` command is similar to the common Unix utility,
:program:`ar`. It archives several files, such as objects and LLVM bitcode
files into a single archive library that can be linked into a program. However,
the archive can contain any kind of file. By default, :program:`llvm-ar`
generates a symbol table that makes linking faster because only the symbol
table needs to be consulted, not each individual file member of the archive.

The :program:`llvm-ar` command can be used to *read* archive files in SVR4,
GNU, BSD and Darwin format, and *write* in the GNU, BSD, and Darwin style
archive files. If an SVR4 format archive is used with the :option:`r`
(replace), :option:`d` (delete), :option:`m` (move) or :option:`q`
(quick update) operations, the archive will be reconstructed in the format
defined by :option:`--format`.

Here's where :program:`llvm-ar` departs from previous :program:`ar` 
implementations:

*The following option is not supported*
 
 [f] - truncate inserted filenames
 
*The following options are ignored for compatibility*

 --plugin=<string> - load a plugin which adds support for other file formats
 
 [l] - ignored in :program:`ar` 

*Symbol Table*

 Since :program:`llvm-ar` supports bitcode files, the symbol table it creates
 includes both native and bitcode symbols.
 
*Deterministic Archives*

 By default, :program:`llvm-ar` always uses zero for timestamps and UIDs/GIDs
 to write archives in a deterministic mode. This is equivalent to the 
 :option:`D` modifier being enabled by default. If you wish to maintain
 compatibility with other :program:`ar` implementations, you can pass the
 :option:`U` modifier to write actual timestamps and UIDs/GIDs.
 
*Windows Paths*

 When on Windows :program:`llvm-ar` treats the names of archived *files* in the same
 case sensitive manner as the operating system. When on a non-Windows machine
 :program:`llvm-ar` does not consider character case.

OPTIONS
-------

:program:`llvm-ar` operations are compatible with other :program:`ar`
implementations. However, there are a few modifiers (:option:`L`) that are not
found in other :program:`ar` implementations. The options for 
:program:`llvm-ar` specify a single basic Operation to perform on the archive,
a variety of Modifiers for that Operation, the name of the archive file, and an
optional list of file names. If the *files* option is not specified, it
generally means either "none" or "all" members, depending on the operation. The
Options, Operations and Modifiers are explained in the sections below.

The minimal set of options is at least one operator and the name of the
archive.

Operations
~~~~~~~~~~

.. option:: d [NT]

 Delete files from the ``archive``. The :option:`N` and :option:`T` modifiers
 apply to this operation. The *files* options specify which members should be
 removed from the archive. It is not an error if a specified file does not
 appear in the archive. If no *files* are specified, the archive is not
 modified.

.. option:: m [abi]

 Move files from one location in the ``archive`` to another. The :option:`a`,
 :option:`b`, and :option:`i` modifiers apply to this operation. The *files*
 will all be moved to the location given by the modifiers. If no modifiers are
 used, the files will be moved to the end of the archive. If no *files* are
 specified, the archive is not modified.

.. option:: p [v]

 Print *files* to the standard output stream. If no *files* are specified, the
 entire ``archive`` is printed. With the :option:`v` modifier,
 :program:`llvm-ar` also prints out the name of the file being output. Printing
 binary files is  ill-advised as they might confuse your terminal settings. The
 :option:`p` operation never modifies the archive.

.. option:: q [LT]

 Quickly append files to the end of the ``archive`` without removing
 duplicates. If no *files* are specified, the archive is not modified. The
 behavior when appending one archive to another depends upon whether the
 :option:`L` and :option:`T` modifiers are used:

 * Appending a regular archive to a regular archive will append the archive
   file. If the :option:`L` modifier is specified the members will be appended
   instead.

 * Appending a regular archive to a thin archive requires the :option:`T`
   modifier and will append the archive file. The :option:`L` modifier is not
   supported.

 * Appending a thin archive to a regular archive will append the archive file.
   If the :option:`L` modifier is specified the members will be appended
   instead.

 * Appending a thin archive to a thin archive will always quick append its
   members.

.. option:: r [abTu]

 Replace existing *files* or insert them at the end of the ``archive`` if
 they do not exist. The :option:`a`, :option:`b`, :option:`T` and :option:`u`
 modifiers apply to this operation. If no *files* are specified, the archive
 is not modified.
 
t[v]
.. option:: t [vO]

 Print the table of contents. Without any modifiers, this operation just prints
 the names of the members to the standard output stream. With the :option:`v`
 modifier, :program:`llvm-ar` also prints out the file type (B=bitcode,
 S=symbol table, blank=regular file), the permission mode, the owner and group,
 are ignored when extracting *files* and set to placeholder values when adding
 size, and the date. With the :option:`O` modifier, display member offsets. If
 any *files* are specified, the listing is only for those files. If no *files*
 are specified, the table of contents for the whole archive is printed.
 
.. option:: V

 A synonym for the :option:`--version` option. 

.. option:: x [oP]

 Extract ``archive`` members back to files. The :option:`o` modifier applies
 to this operation. This operation retrieves the indicated *files* from the
 archive and writes them back to the operating system's file system. If no
 *files* are specified, the entire archive is extracted.

Modifiers (operation specific)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The modifiers below are specific to certain operations. See the Operations
section to determine which modifiers are applicable to which operations.

.. option:: a

 When inserting or moving member files, this option specifies the destination
 of the new files as being after the *relpos* member. If *relpos* is not found,
 the files are placed at the end of the ``archive``. *relpos* cannot be
 consumed without either :option:`a`, :option:`b` or :option:`i`.

.. option:: b

 When inserting or moving member files, this option specifies the destination
 of the new files as being before the *relpos* member. If *relpos* is not
 found, the files are placed at the end of the ``archive``. *relpos* cannot
 be consumed without either :option:`a`, :option:`b` or :option:`i`. This
 modifier is identical to the :option:`i` modifier.

.. option:: i

 A synonym for the :option:`b` option. 

.. option:: L

 When quick appending an ``archive``, instead quick append its members. This
 is a feature for :program:`llvm-ar` that is not found in gnu-ar.

.. option:: N

 When extracting or deleting a member that shares its name with another member,
 the *count* parameter allows you to supply a positive whole number that
 selects the instance of the given name, with "1" indicating the first
 instance. If :option:`N` is not specified the first member of that name will
 be selected. If *count* is not supplied, the operation fails.*count* cannot be
 
.. option:: o

 When extracting files, use the modification times of any *files* as they
 appear in the ``archive``. By default *files* extracted from the archive
 use the time of extraction.
 
.. option:: O

 Display member offsets inside the archive.

.. option:: T

 When creating or modifying an archive, this option specifies that the
 ``archive`` will be thin. By default, archives are not created as thin
 archives and when modifying a thin archive, it will be converted to a regular
 archive.

.. option:: v

 When printing *files* or the ``archive`` table of contents, this modifier
 instructs :program:`llvm-ar` to include additional information in the output.

Modifiers (generic)
~~~~~~~~~~~~~~~~~~~

The modifiers below may be applied to any operation.

.. option:: c

 For the :option:`r` (replace)and :option:`q` (quick update) operations,
 :program:`llvm-ar` will always create the archive if it doesn't exist.
 Normally, :program:`llvm-ar` will print a warning message indicating that the
 ``archive`` is being created. Using this modifier turns off
 that warning.

.. option:: D

 Use zero for timestamps and UIDs/GIDs. This is set by default.

.. option:: P

 Use full paths when matching member names rather than just the file name.
 This can be useful when manipulating an ``archive`` generated by another
 archiver, as some allow paths as member names. This is the default behavior
 for thin archives.

.. option:: s

 This modifier requests that an archive index (or symbol table) be added to the
 ``archive``, as if using ranlib. The symbol table will contain all the
 externally visible functions and global variables defined by all the bitcode
 files in the archive. By default :program:`llvm-ar` generates symbol tables in
 archives. This can also be used as an operation.

.. option:: S

 This modifier is the opposite of the :option:`s` modifier. It instructs
 :program:`llvm-ar` to not build the symbol table. If both :option:`s` and
 :option:`S` are used, the last modifier to occur in the options will prevail.
 
.. option:: u

 Only update ``archive`` members with *files* that have more recent
 timestamps.
 
.. option:: U

 Use actual timestamps and UIDs/GIDs.

Other
~~~~~

.. option:: --format=<type>

 This option allows for default, gnu, darwin or bsd ``<type>`` to be selected.
 When creating an ``archive``, ``<type>`` will default to that of the host
 machine.

.. option:: -h, --help

 Print a summary of command-line options and their meanings.

.. option:: -M

 This option allows for MRI scripts to be read through the standard input
 stream. No other options are compatible with this option.

.. option:: --version

 Display the version of the :program:`llvm-ar` executable.

.. option:: @<FILE>

  Read command-line options and commands from response file ``<FILE>``.

MRI SCRIPTS
-----------

:program:`llvm-ar` understands a subset of the MRI scripting interface commonly
supported by archivers following in the ar tradition. An MRI script contains a
sequence of commands to be executed by the archiver. The :option:`-M` option
allows for an MRI script to be passed to :program:`llvm-ar` through the
standard input stream. 
 
Note that :program:`llvm-ar` has known limitations regarding the use of MRI
scripts:
 
* Each script can only create one archive.
* Existing archives can not be modified.

MRI Script Commands
~~~~~~~~~~~~~~~~~~~

Each command begins with the command's name and must appear on its own line.
Some commands have arguments, which must be separated from the name by
whitespace. An MRI script should begin with either a :option:`CREATE` or
:option:`CREATETHIN` command and will typically end with a :option:`SAVE`
command. Any text after either '*' or ';' is treated as a comment.

.. option:: CREATE archive

 Begin creation of a regular archive with the specified name. Subsequent
 commands act upon this ``archive``.

.. option:: CREATETHIN archive

 Begin creation of a thin archive with the specified name. Subsequent
 commands act upon this ``archive``.

.. option:: ADDLIB archive

 Append the contents of ``archive`` to the current archive.

.. option:: ADDMOD <file>

 Append ``<file>`` to the current archive.

.. option:: DELETE <file>

 Delete the member of the current archive whose file name, excluding directory
 components, matches ``<file>``.

.. option:: SAVE

 Write the current archive to the path specified in the previous
 :option:`CREATE`/:option:`CREATETHIN` command.

.. option:: END

 Ends the MRI script (optional).

EXIT STATUS
-----------

If :program:`llvm-ar` succeeds, it will exit with 0.  Otherwise, if an error occurs, it
will exit with a non-zero value.