## Test how we create SHT_GNU_verdef sections.

## Check that we link the SHT_GNU_verdef section to
## the `.dynstr` section by default.
## Check that we set the value of `sh_info` field to the
## number of version definitions by default.

# RUN: yaml2obj --docnum=1 %s -o %t1
# RUN: llvm-readobj -V %t1 | FileCheck %s
# RUN: llvm-readelf --sections %t1 | \
# RUN:   FileCheck %s -DLINK=3 -DINFO=4 --check-prefix=FIELDS

# FIELDS: [Nr] Name              Type   {{.*}} Flg Lk       Inf
# FIELDS: [ 1] .gnu.version_d    VERDEF {{.*}}   A [[LINK]] [[INFO]]
# FIELDS: [ 3] .dynstr

# CHECK:      VersionDefinitions [
# CHECK-NEXT:   Definition {
# CHECK-NEXT:     Version: 1
# CHECK-NEXT:     Flags [ (0x0)
# CHECK-NEXT:     ]
# CHECK-NEXT:     Index: 0
# CHECK-NEXT:     Hash: 0
# CHECK-NEXT:     Name:
# CHECK-NEXT:     Predecessors: []
# CHECK-NEXT:   }
# CHECK-NEXT:   Definition {
# CHECK-NEXT:     Version: 1
# CHECK-NEXT:     Flags [ (0x1)
# CHECK-NEXT:       Base (0x1)
# CHECK-NEXT:     ]
# CHECK-NEXT:     Index: 1
# CHECK-NEXT:     Hash: 170240160
# CHECK-NEXT:     Name: dso.so.0
# CHECK-NEXT:     Predecessors: []
# CHECK-NEXT:   }
# CHECK-NEXT:   Definition {
# CHECK-NEXT:     Version: 1
# CHECK-NEXT:     Flags [ (0x2)
# CHECK-NEXT:       Weak (0x2)
# CHECK-NEXT:     ]
# CHECK-NEXT:     Index: 2
# CHECK-NEXT:     Hash: 108387921
# CHECK-NEXT:     Name: VERSION_1
# CHECK-NEXT:     Predecessors: []
# CHECK-NEXT:   }
# CHECK-NEXT:   Definition {
# CHECK-NEXT:     Version: 1
# CHECK-NEXT:     Flags [ (0xFFFF)
# CHECK-NEXT:       Base (0x1)
# CHECK-NEXT:       Info (0x4)
# CHECK-NEXT:       Weak (0x2)
# CHECK-NEXT:     ]
# CHECK-NEXT:     Index: 3
# CHECK-NEXT:     Hash: 108387922
# CHECK-NEXT:     Name: VERSION_2
# CHECK-NEXT:     Predecessors: [VERSION_3, VERSION_4]
# CHECK-NEXT:   }
# CHECK-NEXT: ]

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_DYN
Sections:
  - Name:  .gnu.version_d
    Type:  SHT_GNU_verdef
    Flags: [ SHF_ALLOC ]
    Info:  [[INFO=<none>]]
    Link:  [[LINK=<none>]]
    Entries:
## Case 1: an entry that has no Version, Flags, VersionNdx or Hash fields set.
##         Used to check values that are written by default. Also shows
##         that we are able to use the "=<none>" syntax for these fields.
      - Version:    [[VERSION=<none>]]
        Flags:      [[FLAGS=<none>]]
        VersionNdx: [[VERNDX=<none>]]
        Hash:       [[HASH=<none>]]
        Names: []
## Case 2: an arbitrary entry.
      - Flags:      1
        VersionNdx: 1
        Hash:       170240160
        Names:
          - dso.so.0
## Case 3: one more arbitrary entry with different values.
      - Flags:      2
        VersionNdx: 2
        Hash:       108387921
        Names:
          - VERSION_1
## Case 4: an entry that has version predecessors. Also, it sets
##         all known flags as well as few unknown.
      - Flags:      0xffff
        VersionNdx: 3
        Hash:       108387922
        Names:
          - VERSION_2
          - VERSION_3
          - VERSION_4
DynamicSymbols:
  - Name:    foo
    Binding: STB_GLOBAL

## Check that we are able to set sh_info and sh_link fields to arbitrary values.

# RUN: yaml2obj --docnum=1 -DINFO=123 -DLINK=234 %s -o %t1.fields
# RUN: llvm-readelf --sections %t1.fields | \
# RUN:   FileCheck %s -DINFO=123 -DLINK=234 --check-prefix=FIELDS

## Check we are able to emit a version definition which has a version revision
## (vd_version) field value that is not equal to 1.

# RUN: yaml2obj --docnum=1 -DVERSION=2 %s -o %t.version
# RUN: llvm-readobj -V %t.version 2>&1 | FileCheck %s --check-prefix=VERSION-ERR

# VERSION-ERR: unable to dump SHT_GNU_verdef section with index 1: version 2 is not yet supported

## Check we can use "Content" to describe the content.
## Check we set the sh_link field to 0 when there is no .dynstr section.

# RUN: yaml2obj --docnum=2 %s -o %t2
# RUN: llvm-readobj --sections --section-data %t2 | FileCheck %s --check-prefix=CONTENT

# CONTENT:      Name: .gnu.version_d
# CONTENT-NEXT: Type: SHT_GNU_verdef
# CONTENT-NEXT: Flags [ (0x2)
# CONTENT-NEXT:   SHF_ALLOC (0x2)
# CONTENT-NEXT: ]
# CONTENT-NEXT: Address: 0x0
# CONTENT-NEXT: Offset: 0x40
# CONTENT-NEXT: Size: 3
# CONTENT-NEXT: Link: 0
# CONTENT-NEXT: Info: 0
# CONTENT-NEXT: AddressAlignment:
# CONTENT-NEXT: EntrySize:
# CONTENT-NEXT: SectionData (
# CONTENT-NEXT:   0000: 112233
# CONTENT-NEXT: )

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_DYN
Sections:
  - Name:    .gnu.version_d
    Type:    SHT_GNU_verdef
    Flags:   [ SHF_ALLOC ]
    Content: "112233"

## Check we can omit "Content" and "Entries" fields to produce an empty SHT_GNU_verdef section.

# RUN: yaml2obj --docnum=3 %s -o %t3
# RUN: llvm-readelf --sections %t3 | FileCheck %s --check-prefix=NO-PROPS

# NO-PROPS: [Nr] Name           Type   Address          Off    Size   ES Flg Lk Inf Al
# NO-PROPS: [ 1] .gnu.version_d VERDEF 0000000000000000 000040 000000 00   A 0   0  0

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_DYN
Sections:
  - Name:  .gnu.version_d
    Type:  SHT_GNU_verdef
    Flags: [ SHF_ALLOC ]

## Check we can use the "Content" key with the "Size" key when the size is greater
## than or equal to the content size.

# RUN: not yaml2obj --docnum=4 -DSIZE=1 -DCONTENT="'0011'" %s 2>&1 | \
# RUN:   FileCheck %s --check-prefix=CONTENT-SIZE-ERR

# CONTENT-SIZE-ERR: error: Section size must be greater than or equal to the content size

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_DYN
Sections:
  - Name:    .gnu.version_d
    Type:    SHT_GNU_verdef
    Size:    [[SIZE=<none>]]
    Content: [[CONTENT=<none>]]
    Entries: [[ENTRIES=<none>]]

# RUN: yaml2obj --docnum=4 -DSIZE=2 -DCONTENT="'0011'" %s -o %t.cont.size.eq.o
# RUN: llvm-readobj --sections --section-data %t.cont.size.eq.o | \
# RUN:   FileCheck %s --check-prefix=CHECK-CONTENT -DDATA="0011"

# RUN: yaml2obj --docnum=4 -DSIZE=3 -DCONTENT="'0011'" %s -o %t.cont.size.gr.o
# RUN: llvm-readobj --sections --section-data %t.cont.size.gr.o | \
# RUN:   FileCheck %s --check-prefix=CHECK-CONTENT -DDATA="001100"

# CHECK-CONTENT:      Name: .gnu.version_d
# CHECK-CONTENT:      SectionData (
# CHECK-CONTENT-NEXT:   0000: [[DATA]] |
# CHECK-CONTENT-NEXT: )

## Check we can use the "Size" key alone to create the section.

# RUN: yaml2obj --docnum=4 -DSIZE=3 %s -o %t.size.o
# RUN: llvm-readobj --sections --section-data %t.size.o | \
# RUN:   FileCheck %s --check-prefix=CHECK-CONTENT -DDATA="000000"

## Check we can use the "Content" key alone to create the section.

# RUN: yaml2obj --docnum=4 -DCONTENT="'112233'" %s -o %t.content.o
# RUN: llvm-readobj --sections --section-data %t.content.o | \
# RUN:   FileCheck %s --check-prefix=CHECK-CONTENT -DDATA="112233"

## Check we can't use the "Entries" key together with the "Content" or "Size" keys.

# RUN: not yaml2obj --docnum=4 -DSIZE=0 -DENTRIES="[]" %s 2>&1 | \
# RUN:   FileCheck %s --check-prefix=ENTRIES-ERR
# RUN: not yaml2obj --docnum=4 -DCONTENT="'00'" -DENTRIES="[]" %s 2>&1 | \
# RUN:   FileCheck %s --check-prefix=ENTRIES-ERR

# ENTRIES-ERR: error: "Entries" cannot be used with "Content" or "Size"

## Check we set the sh_link field to 0 when the .dynstr section is excluded
## from the section header table.

# RUN: yaml2obj --docnum=5 %s -o %t5
# RUN: llvm-readelf --sections %t5 | FileCheck %s --check-prefix=EXCLUDED

# EXCLUDED: [Nr] Name           {{.*}} ES Flg Lk Inf
# EXCLUDED: [ 1] .gnu.version_d {{.*}} 00     0   0

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_DYN
Sections:
  - Name: .gnu.version_d
    Type: SHT_GNU_verdef
  - Name: .dynstr
    Type: SHT_STRTAB
  - Type: SectionHeaderTable
    Sections:
      - Name: .gnu.version_d
      - Name: .strtab
      - Name: .shstrtab
    Excluded:
      - Name: .dynstr