## Test that yaml2obj emits a .debug_rnglists section when requested.

## a) Generate and verify a little endian DWARF32 .debug_rnglists section in a 64-bit object file.

# RUN: yaml2obj --docnum=1 -DENDIAN=ELFDATA2LSB %s -o %t1.le.dwarf32.o
# RUN: llvm-readobj --sections --section-data %t1.le.dwarf32.o | \
# RUN:   FileCheck -DSIZE=99 -DADDRALIGN=1 %s --check-prefixes=SHDR,DWARF32-LE

#            SHDR: Index: 1
#       SHDR-NEXT: Name: .debug_rnglists (1)
#       SHDR-NEXT: Type: SHT_PROGBITS (0x1)
#       SHDR-NEXT: Flags [ (0x0)
#       SHDR-NEXT: ]
#       SHDR-NEXT: Address: 0x0
#       SHDR-NEXT: Offset: 0x40
#       SHDR-NEXT: Size: [[SIZE]]
#       SHDR-NEXT: Link: 0
#       SHDR-NEXT: Info: 0
#       SHDR-NEXT: AddressAlignment: [[ADDRALIGN]]
#       SHDR-NEXT: EntrySize: 0
# DWARF32-LE-NEXT: SectionData (
# DWARF32-LE-NEXT:   0000: 24000000 05000800 02000000 08000000  |$...............|
##                         ^-------                             unit_length (4-byte)
##                                  ^---                        version (2-byte)
##                                      ^-                      address_size (1-byte)
##                                        ^-                    segment_selector_size (1-byte)
##                                           ^-------           offset_entry_count (4-byte)
##                                                    ^-------  offsets[0] (4-byte)
# DWARF32-LE-NEXT:   0010: 11000000 01B42402 B424B424 0003B424  |......$..$.$...$|
##                         ^-------                             offsets[1] (4-byte)
##                                  ^-                          DW_RLE_base_addressx (1-byte)
##                                    ^---                      operands[0] (ULEB128) 0x1234
##                                        ^-                    DW_RLE_startx_endx (1-byte)
##                                           ^---               operands[0] (ULEB128) 0x1234
##                                               ^---           operands[1] (ULEB128) 0x1234
##                                                    ^-        DW_RLE_end_of_list (1-byte)
##                                                      ^-      DW_RLE_startx_length (1-byte)
##                                                        ^---  operands[0] (ULEB128) 0x1234
# DWARF32-LE-NEXT:   0020: B42404B4 24B42400 37000000 05000800  |.$..$.$.7.......|
##                         ^---                                 operands[1] (ULEB128) 0x1234
##                             ^-                               DW_RLE_offset_pair (1-byte)
##                               ^----                          operands[0] (ULEB128) 0x1234
##                                    ^---                      operands[1] (ULEB128) 0x1234
##                                        ^-                    DW_RLE_end_of_list (1-byte)
##                                           ^-------           unit_length (4-byte)
##                                                    ^---      version (2-byte)
##                                                        ^-    address_size (1-byte)
##                                                          ^-  segment_selector_size (1-byte)
# DWARF32-LE-NEXT:   0030: 02000000 08000000 23000000 05341200  |........#....4..|
##                         ^-------                             offset_entry_count (4-byte)
##                                  ^-------                    offsets[0] (4-byte)
##                                           ^-------           offsets[1] (4-byte)
##                                                    ^-        DW_RLE_base_address (1-byte)
##                                                      ^-----  operands[0] (8-byte)
# DWARF32-LE-NEXT:   0040: 00000000 00063412 00000000 00003412  |......4.......4.|
##                         -----------
##                                    ^-                        DW_RLE_start_end (1-byte)
##                                      ^-----------------      operands[0] (8-byte)
##                                                        ^---  operands[1] (8-byte)
# DWARF32-LE-NEXT:   0050: 00000000 00000007 34120000 00000000  |........4.......|
##                         -------------
##                                      ^-                      DW_RLE_end_of_list (1-byte)
##                                        ^-                    DW_RLE_start_length (1-byte)
##                                           ^----------------  operands[0] (8-byte)
# DWARF32-LE-NEXT:   0060: B42400                               |.$.|
##                         ^---                                 operands[1] (ULEB128) 0x1234
##                             ^-                               DW_RLE_end_of_list (1-byte)
# DWARF32-LE-NEXT: )

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  [[ENDIAN]]
  Type:  ET_EXEC
DWARF:
  debug_rnglists:
    - Lists:
        - Entries:
            - Operator: DW_RLE_base_addressx
              Values:   [ 0x1234 ]
            - Operator: DW_RLE_startx_endx
              Values:   [ 0x1234, 0x1234 ]
            - Operator: DW_RLE_end_of_list
        - Entries:
            - Operator: DW_RLE_startx_length
              Values:   [ 0x1234, 0x1234 ]
            - Operator: DW_RLE_offset_pair
              Values:   [ 0x1234, 0x1234 ]
            - Operator: DW_RLE_end_of_list
    - Lists:
        - Entries:
            - Operator: DW_RLE_base_address
              Values:   [ 0x1234 ]
            - Operator: DW_RLE_start_end
              Values:   [ 0x1234, 0x1234 ]
            - Operator: DW_RLE_end_of_list
        - Entries:
            - Operator: DW_RLE_start_length
              Values:   [ 0x1234, 0x1234 ]
            - Operator: DW_RLE_end_of_list

## b) Generate and verify a big endian DWARF32 .debug_rnglists section in a 64-bit object file.

# RUN: yaml2obj --docnum=1 -DENDIAN=ELFDATA2MSB %s -o %t1.be.dwarf32.o
# RUN: llvm-readobj --sections --section-data %t1.be.dwarf32.o | \
# RUN:   FileCheck -DSIZE=99 -DADDRALIGN=1 %s --check-prefixes=SHDR,DWARF32-BE

# DWARF32-BE-NEXT: SectionData (
# DWARF32-BE-NEXT:   0000: 00000024 00050800 00000002 00000008  |...$............|
##                         ^-------                             unit_length (4-byte)
##                                  ^---                        version (2-byte)
##                                      ^-                      address_size (1-byte)
##                                        ^-                    segment_selector_size (1-byte)
##                                           ^-------           offset_entry_count (4-byte)
##                                                    ^-------  offsets[0] (4-byte)
# DWARF32-BE-NEXT:   0010: 00000011 01B42402 B424B424 0003B424  |......$..$.$...$|
##                         ^-------                             offsets[1] (4-byte)
##                                  ^-                          DW_RLE_base_addressx (1-byte)
##                                    ^---                      operands[0] (ULEB128) 0x1234
##                                        ^-                    DW_RLE_startx_endx (1-byte)
##                                           ^---               operands[0] (ULEB128) 0x1234
##                                               ^---           operands[1] (ULEB128) 0x1234
##                                                    ^-        DW_RLE_end_of_list (1-byte)
##                                                      ^-      DW_RLE_startx_length (1-byte)
##                                                        ^---  operands[0] (ULEB128) 0x1234
# DWARF32-BE-NEXT:   0020: B42404B4 24B42400 00000037 00050800  |.$..$.$....7....|
##                         ^---                                 operands[1] (ULEB128) 0x1234
##                             ^-                               DW_RLE_offset_pair (1-byte)
##                               ^----                          operands[0] (ULEB128) 0x1234
##                                    ^---                      operands[1] (ULEB128) 0x1234
##                                        ^-                    DW_RLE_end_of_list (1-byte)
##                                           ^-------           unit_length (4-byte)
##                                                    ^---      version (2-byte)
##                                                        ^-    address_size (1-byte)
##                                                          ^-  segment_selector_size (1-byte)
# DWARF32-BE-NEXT:   0030: 00000002 00000008 00000023 05000000  |...........#....|
##                         ^-------                             offset_entry_count (4-byte)
##                                  ^-------                    offsets[0] (4-byte)
##                                           ^-------           offsets[1] (4-byte)
##                                                    ^-        DW_RLE_base_address (1-byte)
##                                                      ^-----  operands[0] (8-byte)
# DWARF32-BE-NEXT:   0040: 00000012 34060000 00000000 12340000  |....4........4..|
##                         -----------
##                                    ^-                        DW_RLE_start_end (1-byte)
##                                      ^-----------------      operands[0] (8-byte)
##                                                        ^---  operands[1] (8-byte)
# DWARF32-BE-NEXT:   0050: 00000000 12340007 00000000 00001234  |.....4.........4|
##                         -------------
##                                      ^-                      DW_RLE_end_of_list (1-byte)
##                                        ^-                    DW_RLE_start_length (1-byte)
##                                           ^----------------  operands[0] (8-byte)
# DWARF32-BE-NEXT:   0060: B42400                               |.$.|
##                         ^---                                 operands[1] (ULEB128) 0x1234
##                             ^-                               DW_RLE_end_of_list (1-byte)
# DWARF32-BE-NEXT: )

## c) Generate and verify a little endian DWARF64 .debug_rnglists section in a 64-bit object file.

# RUN: yaml2obj --docnum=2 -DENDIAN=ELFDATA2LSB %s -o %t2.le.dwarf64.o
# RUN: llvm-readobj --sections --section-data %t2.le.dwarf64.o | \
# RUN:   FileCheck -DSIZE=38 -DADDRALIGN=1 %s --check-prefixes=SHDR,DWARF64-LE

# DWARF64-LE-NEXT: SectionData (
# DWARF64-LE-NEXT:   0000: FFFFFFFF 1A000000 00000000 05000800  |................|
##                         ^-------------------------           unit_length (12-byte)
##                                                    ^---      version (2-byte)
##                                                        ^-    address_size (1-byte)
##                                                          ^-  segment_selector_size (1-byte)
# DWARF64-LE-NEXT:   0010: 02000000 10000000 00000000 11000000  |................|
##                         ^-------                             offset_entry_count (4-byte)
##                                  ^----------------           offsets[0] (8-byte)
##                                                    ^-------  offsets[1] (8-byte)
# DWARF64-LE-NEXT:   0020: 00000000 0000                        |......|
##                         --------
##                                  ^-                          DW_RLE_end_of_list (1-byte)
##                                    ^-                        DW_RLE_end_of_list (1-byte)
# DWARF64-LE-NEXT: )

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  [[ENDIAN]]
  Type:  ET_EXEC
DWARF:
  debug_rnglists:
    - Format:  DWARF64
      Lists:
        - Entries:
            - Operator: DW_RLE_end_of_list
        - Entries:
            - Operator: DW_RLE_end_of_list

## d) Generate and verify a big endian DWARF64 .debug_rnglists section in a 64-bit object file.

# RUN: yaml2obj --docnum=2 -DENDIAN=ELFDATA2MSB %s -o %t2.be.dwarf64.o
# RUN: llvm-readobj --sections --section-data %t2.be.dwarf64.o | \
# RUN:   FileCheck -DSIZE=38 -DADDRALIGN=1 %s --check-prefixes=SHDR,DWARF64-BE

# DWARF64-BE-NEXT: SectionData (
# DWARF64-BE-NEXT:   0000: FFFFFFFF 00000000 0000001A 00050800  |................|
##                         ^-------------------------           unit_length (12-byte)
##                                                    ^---      version (2-byte)
##                                                        ^-    address_size (1-byte)
##                                                          ^-  segment_selector_size (1-byte)
# DWARF64-BE-NEXT:   0010: 00000002 00000000 00000010 00000000  |................|
##                         ^-------                             offset_entry_count (4-byte)
##                                  ^----------------           offsets[0] (8-byte)
##                                                    ^-------  offsets[1] (8-byte)
# DWARF64-BE-NEXT:   0020: 00000011 0000                        |......|
##                         --------
##                                  ^-                          DW_RLE_end_of_list (1-byte)
##                                    ^-                        DW_RLE_end_of_list (1-byte)
# DWARF64-BE-NEXT: )

## e) Test that the length, version, segment_selector_size, address_size, offset_entry_count
## and offsets fields can be specified manually.

# RUN: yaml2obj --docnum=3 %s -o %t3.o
# RUN: llvm-readelf --hex-dump=.debug_rnglists %t3.o | \
# RUN:   FileCheck %s --check-prefix=OVERWRITE

#      OVERWRITE: Hex dump of section '.debug_rnglists':
# OVERWRITE-NEXT: 0x00000000 34120000 06000303 04000000 01000000 4...............
##                           ^-------                            unit_length (4-byte)
##                                    ^---                       version (2-byte)
##                                        ^-                     address_size (1-byte)
##                                          ^-                   segment_selector_size (1-byte)
##                                             ^-------          offset_entry_count (4-byte)
##                                                      ^------- offsets[0] (4-byte)
# OVERWRITE-NEXT: 0x00000010 0000                                ..

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_rnglists:
    - Length:              0x1234
      Version:             6
      AddressSize:         3
      SegmentSelectorSize: 3
      OffsetEntryCount:    4
      Offsets:             [ 0x01 ]
      Lists:
        - Entries:
            - Operator: DW_RLE_end_of_list
        - Entries:
            - Operator: DW_RLE_end_of_list

## f) Test that the default value of the address_size field in a 32-bit object file is 4.

# RUN: yaml2obj --docnum=4 %s -o %t4.o
# RUN: llvm-readelf --hex-dump=.debug_rnglists %t4.o | \
# RUN:   FileCheck %s --check-prefix=ADDRSIZE32

#      ADDRSIZE32: Hex dump of section '.debug_rnglists':
# ADDRSIZE32-NEXT: 0x00000000 22000000 05000400 01000000 04000000 "...............
##                                         ^-                     address_size (1-byte)
# ADDRSIZE32-NEXT: 0x00000010 05341200 00063412 00002143 00000734 .4....4...!C...4
##                            ^-                                  DW_RLE_base_address (1-byte)
##                              ^--------                         operands[0] (4-byte)
##                                       ^-                       DW_RLE_start_end (1-byte)
##                                         ^--------              operands[0] (4-byte)
##                                                  ^--------     operands[1] (4-byte)
##                                                           ^-   DW_RLE_start_length (1-byte)
##                                                             ^- operands[0] (4-byte)
# ADDRSIZE32-NEXT: 0x00000020 120000a1 8601                       ......
##                            ------
##                                  ^------                       operands[1] (ULEB128) 0x4321

--- !ELF
FileHeader:
  Class: ELFCLASS32
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_rnglists:
    - Lists:
        - Entries:
            - Operator: DW_RLE_base_address
              Values:   [ 0x1234 ]
            - Operator: DW_RLE_start_end
              Values:   [ 0x1234, 0x4321 ]
            - Operator: DW_RLE_start_length
              Values:   [ 0x1234, 0x4321 ]

## g) Test that the address_size field can be specified manually and the size of
## corresponding operands will be changed accordingly.

# RUN: yaml2obj --docnum=5 %s -o %t5.o
# RUN: llvm-readelf --hex-dump=.debug_rnglists %t5.o | \
# RUN:   FileCheck %s --check-prefix=ADDRSIZE

#      ADDRSIZE: Hex dump of section '.debug_rnglists':
# ADDRSIZE-NEXT: 0x00000000 22000000 05000400 01000000 04000000 "...............
##                                       ^-                     address_size 0x04
# ADDRSIZE-NEXT: 0x00000010 05341200 00063412 00002143 00000734 .4....4...!C...4
##                          ^-                                  DW_RLE_base_address
##                            ^--------                         operands[0] (4-byte)
##                                     ^-                       DW_RLE_start_end
##                                       ^--------              operands[0] (4-byte)
##                                                ^--------     operands[1] (4-byte)
##                                                         ^-   DW_RLE_start_length
##                                                           ^- operands[0] (4-byte)
# ADDRSIZE-NEXT: 0x00000020 120000b4 2400                       ....$.
##                          ------
##                                ^----                         operands[1] (ULEB128)
##                                     ^-                       DW_RLE_end_of_list

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_rnglists:
    - AddressSize: 4
      Lists:
        - Entries:
            - Operator: DW_RLE_base_address
              Values:   [ 0x1234 ]
            - Operator: DW_RLE_start_end
              Values:   [ 0x1234, 0x4321 ]
            - Operator: DW_RLE_start_length
              Values:   [ 0x1234, 0x1234 ]
            - Operator: DW_RLE_end_of_list

## h) Test that yaml2obj emits an error message if we try to assign an invalid value to
## 'AddressSize' when there is an entry whose operands contain address.

# RUN: not yaml2obj -DOPERATOR=base_address -DVALUES=[0x01] --docnum=6 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=base_address %s --check-prefix=INVALID-ADDRSIZE

# RUN: not yaml2obj -DOPERATOR=start_end -DVALUES=[0x01,0x02] --docnum=6 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=start_end %s --check-prefix=INVALID-ADDRSIZE

# RUN: not yaml2obj -DOPERATOR=start_length -DVALUES=[0x01,0x02] --docnum=6 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=start_length %s --check-prefix=INVALID-ADDRSIZE

# INVALID-ADDRSIZE: yaml2obj: error: unable to write address for the operator DW_RLE_[[OPERATOR]]: invalid integer write size: 3

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_rnglists:
    - AddressSize: 3
      Lists:
        - Entries:
            - Operator: DW_RLE_[[OPERATOR]]
              Values:   [[VALUES]]

## i) Test that an invalid address_size can be used when there are no address-using operators.

# RUN: yaml2obj --docnum=7 %s -o %t7.o
# RUN: llvm-readelf --hex-dump=.debug_rnglists %t7.o | \
# RUN:   FileCheck %s --check-prefix=ADDRSIZE-NOERROR

#      ADDRSIZE-NOERROR: Hex dump of section '.debug_rnglists':
# ADDRSIZE-NOERROR-NEXT: 0x00000000 0e000000 05000300 01000000 04000000 ................
##                                               ^-                     address_size (1-byte) 0x03
# ADDRSIZE-NOERROR-NEXT: 0x00000010 0101                                ..

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_rnglists:
    - AddressSize: 3
      Lists:
        - Entries:
            - Operator: DW_RLE_base_addressx
              Values:   [ 0x01 ]

## j) Test that yaml2obj emits an error message if we specify invalid numbers of operands
## for an operator.

# RUN: not yaml2obj -DOPERATOR=end_of_list -DVALUES=[0x01] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=end_of_list -DACTUAL=1 -DEXPECTED=0 %s --check-prefix=INVALID-OPERANDS

# RUN: not yaml2obj -DOPERATOR=base_addressx -DVALUES=[] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=base_addressx -DACTUAL=0 -DEXPECTED=1 %s --check-prefix=INVALID-OPERANDS

# RUN: not yaml2obj -DOPERATOR=startx_endx -DVALUES=[0x01] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=startx_endx -DACTUAL=1 -DEXPECTED=2 %s --check-prefix=INVALID-OPERANDS

# RUN: not yaml2obj -DOPERATOR=startx_length -DVALUES=[0x01] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=startx_length -DACTUAL=1 -DEXPECTED=2 %s --check-prefix=INVALID-OPERANDS

# RUN: not yaml2obj -DOPERATOR=offset_pair -DVALUES=[] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=offset_pair -DACTUAL=0 -DEXPECTED=2 %s --check-prefix=INVALID-OPERANDS

# RUN: not yaml2obj -DOPERATOR=base_address -DVALUES=[0x01,0x02] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=base_address -DACTUAL=2 -DEXPECTED=1 %s --check-prefix=INVALID-OPERANDS

# RUN: not yaml2obj -DOPERATOR=start_end -DVALUES=[0x01,0x02,0x03] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=start_end -DACTUAL=3 -DEXPECTED=2 %s --check-prefix=INVALID-OPERANDS

# RUN: not yaml2obj -DOPERATOR=start_length -DVALUES=[0x01] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=start_length -DACTUAL=1 -DEXPECTED=2 %s --check-prefix=INVALID-OPERANDS

# INVALID-OPERANDS: yaml2obj: error: invalid number ([[ACTUAL]]) of operands for the operator: DW_RLE_[[OPERATOR]], [[EXPECTED]] expected

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_rnglists:
    - AddressSize: 3
      Lists:
        - Entries:
            - Operator: DW_RLE_[[OPERATOR]]
              Values:   [[VALUES]]

## k) Test that an empty list is allowed for a range list table.

# RUN: yaml2obj --docnum=9 %s -o %t9.o
# RUN: llvm-readelf --hex-dump=.debug_rnglists %t9.o | \
# RUN:   FileCheck %s --check-prefix=EMPTY-LIST

#      EMPTY-LIST: Hex dump of section '.debug_rnglists':
# EMPTY-LIST-NEXT: 0x00000000 08000000 05000800 00000000          ............
##                            ^-------                            unit_length (4-byte)
##                                     ^---                       version (2-byte)
##                                         ^---                   address_size (1-byte)
##                                              ^-------          offset_entry_count (4-byte)

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_rnglists:
    - Lists: []

## l) Generate the .debug_rnglists section from raw section content.

# RUN: yaml2obj --docnum=10 %s -o %t10.o
# RUN: llvm-readobj --sections --section-data %t10.o | \
# RUN:   FileCheck %s -DSIZE=3 -DADDRALIGN=0 --check-prefixes=SHDR,ARBITRARY-CONTENT

#      ARBITRARY-CONTENT: SectionData (
# ARBITRARY-CONTENT-NEXT:   0000: 112233
# ARBITRARY-CONTENT-NEXT: )

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:    .debug_rnglists
    Type:    SHT_PROGBITS
    Content: "112233"

## m) Generate the .debug_rnglists section when the "Size" is specified.

# RUN: yaml2obj --docnum=11 %s -o %t11.o
# RUN: llvm-readelf --hex-dump=.debug_rnglists %t11.o | \
# RUN:   FileCheck %s --check-prefix=SIZE

#       SIZE: Hex dump of section '.debug_rnglists':
#  SIZE-NEXT: 0x00000000 00000000 00000000 00000000 00000000 ................
# SIZE-EMPTY:

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name: .debug_rnglists
    Type: SHT_PROGBITS
    Size: 0x10

## n) Test that yaml2obj emits an error message when both the "Size" and the
## "debug_rnglists" entry are specified at the same time.

# RUN: not yaml2obj --docnum=12 %s 2>&1 | FileCheck %s --check-prefix=ERROR

# ERROR: yaml2obj: error: cannot specify section '.debug_rnglists' contents in the 'DWARF' entry and the 'Content' or 'Size' in the 'Sections' entry at the same time

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name: .debug_rnglists
    Type: SHT_PROGBITS
    Size: 0x10
DWARF:
  debug_rnglists:
    - Lists: []

## o) Test that yaml2obj emits an error message when both the "Content" and the
## "debug_rnglists" entry are specified at the same time.

# RUN: not yaml2obj --docnum=13 %s 2>&1 | FileCheck %s --check-prefix=ERROR

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:    .debug_rnglists
    Type:    SHT_PROGBITS
    Content: "00"
DWARF:
  debug_rnglists:
    - Lists: []

## p) Test that all the properties can be overridden by the section header when
## the "debug_rnglists" entry doesn't exist.

# RUN: yaml2obj --docnum=14 %s -o %t14.o
# RUN: llvm-readelf --sections %t14.o | FileCheck %s --check-prefix=OVERRIDDEN

#      OVERRIDDEN: [Nr] Name            Type   Address          Off    Size   ES Flg Lk Inf Al
#      OVERRIDDEN: [ 1] .debug_rnglists STRTAB 0000000000002020 000050 00000c 01   A  2   1  2
# OVERRIDDEN-NEXT: [ 2] .sec            STRTAB 0000000000000000 00005c 000000 00      0   0  0

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:         .debug_rnglists
    Type:         SHT_STRTAB  ## SHT_PROGBITS by default.
    Flags:        [SHF_ALLOC] ## 0 by default.
    Link:         .sec        ## 0 by default.
    EntSize:      1           ## 0 by default.
    Info:         1           ## 0 by default.
    AddressAlign: 2           ## 0 by default.
    Address:      0x2020      ## 0x00 by default.
    Offset:       0x50        ## 0x40 for the first section.
    Size:         0x0c        ## Set the "Size" so that we can reuse the check tag "OVERRIDDEN".
  - Name:         .sec        ## Linked by .debug_rnglists.
    Type:         SHT_STRTAB

## q) Test that all the properties can be overridden by the section header when
## the "debug_rnglists" entry exists.

# RUN: yaml2obj --docnum=15 %s -o %t15.o
# RUN: llvm-readelf --sections %t15.o | FileCheck %s --check-prefix=OVERRIDDEN

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:         .debug_rnglists
    Type:         SHT_STRTAB  ## SHT_PROGBITS by default.
    Flags:        [SHF_ALLOC] ## 0 by default.
    Link:         .sec        ## 0 by default.
    EntSize:      1           ## 0 by default.
    Info:         1           ## 0 by default.
    AddressAlign: 2           ## 1 by default.
    Address:      0x2020      ## 0x00 by default.
    Offset:       0x50        ## 0x40 for the first section.
  - Name:         .sec        ## Linked by .debug_rnglists.
    Type:         SHT_STRTAB
DWARF:
  debug_rnglists:
    - Lists: []

## r) Test that the .debug_rnglists section header is emitted if the "debug_rnglists"
## entry is empty.

# RUN: yaml2obj --docnum=16 %s -o %t16.o
# RUN: llvm-readobj --sections --section-data %t16.o | \
# RUN:   FileCheck -DSIZE=0 -DADDRALIGN=1 %s --check-prefixes=SHDR,EMPTY-CONTENT

# EMPTY-CONTENT-NEXT: SectionData (
# EMPTY-CONTENT-NEXT: )

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_rnglists: []

## s) Test that we are able to generate a range list via raw binary data.

# RUN: yaml2obj --docnum=17 %s -o %t17.o
# RUN: llvm-readelf --hex-dump=.debug_rnglists %t17.o | \
# RUN:   FileCheck %s --check-prefix=CUSTOM-LIST

#      CUSTOM-LIST: Hex dump of section '.debug_rnglists':
# CUSTOM-LIST-NEXT: 0x00000000 29000000 05000800 03000000 0c000000 )...............
##                             ^-------                            unit_length (4-byte)
##                                      ^---                       version (2-byte)
##                                          ^-                     address_size (1-byte)
##                                            ^-                   segment_selector_size (1-byte)
##                                               ^-------          offset_entry_count (4-byte)
##                                                        ^------- offsets[0] (4-byte)
# CUSTOM-LIST-NEXT: 0x00000010 11000000 19000000 02b424b4 24123456 ..........$.$.4V
##                             ^-------                            offsets[1] (4-byte)
##                                      ^-------                   offsets[2] (4-byte)
##                                               ^-                DW_RLE_startx_endx
##                                                 ^---            operands[0] (ULEB128) 0x1234
##                                                     ^----       operands[1] (ULEB128) 0x1234
##                                                          ^----- custom list content
# CUSTOM-LIST-NEXT: 0x00000020 7890abcd efabcdef 12345678 90       x........4Vx.
##                             -----------
##                                        ^-----------------       custom list content

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_rnglists:
    - Lists:
        - Entries:
            - Operator: DW_RLE_startx_endx
              Values:   [ 0x1234, 0x1234 ]
        - Content: '1234567890abcdef'
        - Content: 'abcdef1234567890'

## t) Test that yaml2obj emits an error message when 'Content' and 'Entries' are specified
## at the same time.

# RUN: not yaml2obj --docnum=18 %s 2>&1 | FileCheck %s --check-prefix=ERR

#      ERR: YAML:{{.*}}: error: Entries and Content can't be used together
# ERR-NEXT:         - Entries: []
# ERR-NEXT:           ^

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_rnglists:
    - Lists:
        - Entries: []
          Content: ''

## u) Test that when the "OffsetEntryCount" is specified to be 0 and "Offsets" is not specified,
## the offsets array is not emitted.

# RUN: yaml2obj --docnum=19 -DENTRYCOUNT=0 %s -o %t19.o
# RUN: llvm-readelf --hex-dump=.debug_rnglists %t19.o | \
# RUN:   FileCheck %s --check-prefix=NO-OFFSETS

#      NO-OFFSETS: Hex dump of section '.debug_rnglists':
# NO-OFFSETS-NEXT: 0x00000000 0e000000 05000800 00000000 02010202 ................
##                                              ^-------          offset_entry_count (4-byte)
##                                                       ^-       DW_RLE_startx_endx
##                                                         ^-     operands[0] (ULEB128) 0x01
##                                                           ^-   operands[1] (ULEB128) 0x02
##                                                             ^- DW_RLE_startx_endx
# NO-OFFSETS-NEXT: 0x00000010 0102                                ..
##                            ^-                                  operands[0] (ULEB128) 0x01
##                              ^-                                operands[1] (ULEB128) 0x02

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_rnglists:
    - OffsetEntryCount: [[ENTRYCOUNT=<none>]]
      Offsets:          [[OFFSETS=<none>]]
      Lists:
        - Entries:
            - Operator: DW_RLE_startx_endx
              Values:   [ 0x01, 0x02 ]
        - Entries:
            - Operator: DW_RLE_startx_endx
              Values:   [ 0x01, 0x02 ]

## v) Test that when the "Offsets" entry is specified to be empty and the "OffsetEntryCount" is not specified,
## the offsets array will be omitted.

# RUN: yaml2obj --docnum=19 -DOFFSETS=[] %s -o %t20.o
# RUN: llvm-readelf --hex-dump=.debug_rnglists %t20.o | \
# RUN:   FileCheck %s --check-prefix=NO-OFFSETS

## w) Test that if "Offsets" is specified, the offsets array will be emitted accordingly, even when
## the "OffsetEntryCount" is specified to be 0.

# RUN: yaml2obj --docnum=19 -DOFFSETS=[0x01,0x02,0x03] -DENTRYCOUNT=0 %s -o %t21.o
# RUN: llvm-readelf --hex-dump=.debug_rnglists %t21.o | \
# RUN:   FileCheck %s --check-prefix=OFFSETS

#      OFFSETS: Hex dump of section '.debug_rnglists':
# OFFSETS-NEXT: 0x00000000 0e000000 05000800 00000000 01000000 ................
##                                           ^-------          offset_entry_count (4-byte)
##                                                    ^------- offsets[0] (4-byte)
# OFFSETS-NEXT: 0x00000010 02000000 03000000 02010202 0102     ..............
##                         ^-------                            offsets[1] (4-byte)
##                                  ^-------                   offsets[2] (4-byte)
##                                           ^-                DW_RLE_startx_endx
##                                             ^-              operands[0] (ULEB128) 0x01
##                                               ^-            operands[1] (ULEB128) 0x02
##                                                 ^-          DW_RLE_startx_endx
##                                                    ^-       operands[0] (ULEB128) 0x01
##                                                      ^-     operands[1] (ULEB128) 0x02