## Test that yaml2obj emits .debug_ranges section.

## a) Generate the .debug_ranges section from the "DWARF" entry.

## Generate and verify a little endian .debug_ranges section.

# RUN: yaml2obj --docnum=1 -DENDIAN=ELFDATA2LSB %s -o %t.le.o
# RUN: llvm-readobj --sections --section-data %t.le.o | \
# RUN:   FileCheck %s -DSIZE=120 -DADDRALIGN=1 --check-prefixes=DWARF-HEADER,DWARF-LE-CONTENT

#          DWARF-HEADER: Index: 1
#     DWARF-HEADER-NEXT: Name: .debug_ranges (1)
#     DWARF-HEADER-NEXT: Type: SHT_PROGBITS (0x1)
#     DWARF-HEADER-NEXT: Flags [ (0x0)
#     DWARF-HEADER-NEXT: ]
#     DWARF-HEADER-NEXT: Address: 0x0
#     DWARF-HEADER-NEXT: Offset: 0x40
#     DWARF-HEADER-NEXT: Size: [[SIZE]]
#     DWARF-HEADER-NEXT: Link: 0
#     DWARF-HEADER-NEXT: Info: 0
#     DWARF-HEADER-NEXT: AddressAlignment: [[ADDRALIGN]]
#     DWARF-HEADER-NEXT: EntrySize: 0
# DWARF-LE-CONTENT-NEXT: SectionData (
# DWARF-LE-CONTENT-NEXT:   0000: 10000000 20000000 30000000 40000000
##                               |        |        |        |
##                               |        |        |        +------- HighOffset (4-byte) 0x40
##                               |        |        +------- LowOffset (4-byte) 0x30
##                               |        +------- HighOffset (4-byte) 0x20
##                               +------- LowOffset (4-byte) 0x10
##
# DWARF-LE-CONTENT-NEXT:   0010: FFFFFFFF 10000000 00000000 00000000
##                               |        |        |        |
##                               |        |        |        +------- HighOffset (4-byte) 0x00
##                               |        |        +------- LowOffset (4-byte) 0x00
##                               |        +------- Base Address (4-byte) 0x10
##                               +------- Base Address Entry (4-byte) UINT32_MAX
##
# DWARF-LE-CONTENT-NEXT:   0020: 00000000 00000000 10000000 00000000
##                               |                 |
##                               |                 +---------------- LowOffset (8-byte) 0x10
##                               +---------------- Terminating Entry (8-byte)
##
# DWARF-LE-CONTENT-NEXT:   0030: 20000000 00000000 30000000 00000000
##                               |                 |
##                               |                 +---------------- LowOffset (8-byte) 0x30
##                               +---------------- HighOffset (8-byte) 0x20
##
# DWARF-LE-CONTENT-NEXT:   0040: 40000000 00000000 FFFFFFFF FFFFFFFF
##                               |                 |
##                               |                 +---------------- Base Address Entry (8-byte) UINT64_MAX
##                               +---------------- HighOffset (8-byte) 0x40
##
# DWARF-LE-CONTENT-NEXT:   0050: 10000000 00000000 00000000 00000000
##                               |                 |
##                               |                 +---------------- LowOffset (8-byte) 0x00
##                               +---------------- Base Address (8-byte) 0x10
##
# DWARF-LE-CONTENT-NEXT:   0060: 00000000 00000000 00000000 00000000
##                               |                 |
##                               |                 +---------------- Terminating Entry (16-byte)
##                               +---------------- HighOffset (8-byte) 0x00
##
# DWARF-LE-CONTENT-NEXT:   0070: 00000000 00000000
##                               |
##                               +---------------- Terminating Entry (lower 8-byte)
##
# DWARF-LE-CONTENT-NEXT: )

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  [[ENDIAN]]
  Type:  ET_EXEC
DWARF:
  debug_ranges:
    - AddrSize: 0x04
      Entries:
        - LowOffset:  0x00000010
          HighOffset: 0x00000020
        - LowOffset:  0x00000030
          HighOffset: 0x00000040
        - LowOffset:  0xffffffff
          HighOffset: 0x00000010
        - LowOffset:  0x00000000
          HighOffset: 0x00000000
    - Entries:
        - LowOffset:  0x0000000000000010
          HighOffset: 0x0000000000000020
        - LowOffset:  0x0000000000000030
          HighOffset: 0x0000000000000040
        - LowOffset:  0xffffffffffffffff
          HighOffset: 0x0000000000000010
        - LowOffset:  0x0000000000000000
          HighOffset: 0x0000000000000000

## Generate and verify a big endian .debug_ranges section.

# RUN: yaml2obj --docnum=1 -DENDIAN=ELFDATA2MSB %s -o %t.be.o
# RUN: llvm-readobj --sections --section-data %t.be.o | \
# RUN:   FileCheck %s -DSIZE=120 -DADDRALIGN=1 --check-prefixes=DWARF-HEADER,DWARF-BE-CONTENT

# DWARF-BE-CONTENT-NEXT: SectionData (
# DWARF-BE-CONTENT-NEXT: 0000: 00000010 00000020 00000030 00000040
##                             |        |        |        |
##                             |        |        |        +------- HighOffset (4-byte) 0x40
##                             |        |        +------- LowOffset (4-byte) 0x30
##                             |        +------- HighOffset (4-byte) 0x20
##                             +------- LowOffset (4-byte) 0x10
##
# DWARF-BE-CONTENT-NEXT: 0010: FFFFFFFF 00000010 00000000 00000000
##                             |        |        |        |
##                             |        |        |        +------- HighOffset (4-byte) 0x00
##                             |        |        +------- LowOffset (4-byte) 0x00
##                             |        +------- Base Address (4-byte) 0x10
##                             +------- Base Address Entry (4-byte) UINT32_MAX
##
# DWARF-BE-CONTENT-NEXT: 0020: 00000000 00000000 00000000 00000010
##                             |                 |
##                             |                 +---------------- LowOffset (8-byte) 0x10
##                             +---------------- Terminating Entry (8-byte)
##
# DWARF-BE-CONTENT-NEXT: 0030: 00000000 00000020 00000000 00000030
##                             |                 |
##                             |                 +---------------- LowOffset (8-byte) 0x30
##                             +---------------- HighOffset (8-byte) 0x20
##
# DWARF-BE-CONTENT-NEXT: 0040: 00000000 00000040 FFFFFFFF FFFFFFFF
##                             |                 |
##                             |                 +---------------- Base Address Entry (8-byte) UINT64_MAX
##                             +---------------- HighOffset (8-byte) 0x40
##
# DWARF-BE-CONTENT-NEXT: 0050: 00000000 00000010 00000000 00000000
##                             |                 |
##                             |                 +---------------- LowOffset (8-byte) 0x00
##                             +---------------- Base Address (8-byte) 0x10
##
# DWARF-BE-CONTENT-NEXT: 0060: 00000000 00000000 00000000 00000000
##                             |                 |
##                             |                 +---------------- Terminating Entry (16-byte)
##                             +---------------- HighOffset (8-byte) 0x00
##
# DWARF-BE-CONTENT-NEXT: 0070: 00000000 00000000
##                             |
##                             +---------------- Terminating Entry (lower 8-byte)
##
# DWARF-BE-CONTENT-NEXT: )

## b) Generate the .debug_ranges section from raw section content.

# RUN: yaml2obj --docnum=2 %s -o %t2.o
# RUN: llvm-readobj --sections --section-data %t2.o | \
# RUN:   FileCheck %s -DSIZE=3 -DADDRALIGN=0 --check-prefixes=DWARF-HEADER,ARBITRARY-CONTENT

#      ARBITRARY-CONTENT: SectionData (
# ARBITRARY-CONTENT-NEXT:   0000: 112233
# ARBITRARY-CONTENT-NEXT: )

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:    .debug_ranges
    Type:    SHT_PROGBITS
    Content: "112233"

## c) Generate the .debug_ranges section when the "Size" is specified.

# RUN: yaml2obj --docnum=3 %s -o %t3.o
# RUN: llvm-readobj --hex-dump=.debug_ranges %t3.o | FileCheck %s --check-prefix=SIZE

#       SIZE: Hex dump of section '.debug_ranges':
#  SIZE-NEXT: 0x00000000 00000000 00000000 00000000 00000000 ................
# SIZE-EMPTY:

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name: .debug_ranges
    Type: SHT_PROGBITS
    Size: 0x10

## d) Test that yaml2obj emits an error message when both the "Size" and the
## "debug_ranges" entry are specified at the same time.

# RUN: not yaml2obj --docnum=4 %s 2>&1 | FileCheck %s --check-prefix=ERROR

# ERROR: yaml2obj: error: cannot specify section '.debug_ranges' contents in the 'DWARF' entry and the 'Content' or 'Size' in the 'Sections' entry at the same time

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name: .debug_ranges
    Type: SHT_PROGBITS
    Size: 0x10
DWARF:
  debug_ranges:
    - Entries:
        - LowOffset:  0x0000000000000001
          HighOffset: 0x0000000000000002

## e) Test that yaml2obj emits an error message when both the "Content" and the
## "debug_ranges" entry are specified at the same time.

# RUN: not yaml2obj --docnum=5 %s 2>&1 | FileCheck %s --check-prefix=ERROR

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:    .debug_ranges
    Type:    SHT_PROGBITS
    Content: "00"
DWARF:
  debug_ranges:
    - Entries:
        - LowOffset:  0x0000000000000001
          HighOffset: 0x0000000000000002

## f) Test that all the properties can be overridden by the section header when
## the "debug_ranges" entry doesn't exist.

# RUN: yaml2obj --docnum=6 %s -o %t6.o
# RUN: llvm-readelf --sections %t6.o | FileCheck %s --check-prefix=OVERRIDDEN

#      OVERRIDDEN: [Nr] Name          Type   Address          Off    Size   ES Flg Lk Inf Al
#      OVERRIDDEN: [ 1] .debug_ranges STRTAB 0000000000002020 000050 000020 01   A  2   1  2
# OVERRIDDEN-NEXT: [ 2] .sec          STRTAB 0000000000000000 000070 000000 00      0   0  0

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:         .debug_ranges
    Type:         SHT_STRTAB  # SHT_PROGBITS by default.
    Flags:        [SHF_ALLOC] # 0 by default.
    Link:         .sec        # 0 by default.
    EntSize:      1           # 0 by default.
    Info:         1           # 0 by default.
    AddressAlign: 2           # 0 by default.
    Address:      0x2020      # 0x00 by default.
    Offset:       0x50        # 0x40 for the first section.
    Size:         0x20        # Set the "Size" so that we can reuse the check tag "OVERRIDDEN".
  - Name:         .sec        # Linked by .debug_ranges.
    Type:         SHT_STRTAB

## g) Test that all the properties can be overridden by the section header when
## the "debug_ranges" entry exists.

# RUN: yaml2obj --docnum=7 %s -o %t7.o
# RUN: llvm-readelf --sections %t7.o | FileCheck %s --check-prefix=OVERRIDDEN

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:         .debug_ranges
    Type:         SHT_STRTAB  # SHT_PROGBITS by default.
    Flags:        [SHF_ALLOC] # 0 by default.
    Link:         .sec        # 0 by default.
    EntSize:      1           # 0 by default.
    Info:         1           # 0 by default.
    AddressAlign: 2           # 1 by default.
    Address:      0x2020      # 0x00 by default.
    Offset:       0x50        # 0x40 for the first section.
  - Name:         .sec        # Linked by .debug_ranges.
    Type:         SHT_STRTAB
DWARF:
  debug_ranges:
    - Entries:
        - LowOffset:  0x0000000000000001
          HighOffset: 0x0000000000000002

## h) Test that yaml2obj automatically pads zeros if we try to assign an offset that
## is greater than or equal to the number of bytes written already.

# RUN: yaml2obj --docnum=8 %s -o %t8.o
# RUN: llvm-readelf --hex-dump=.debug_ranges %t8.o | FileCheck %s --check-prefix=PADDED

#      PADDED: Hex dump of section '.debug_ranges':
# PADDED-NEXT: 0x00000000 01000000 00000000 02000000 00000000
##                        |                 |
##                        |                 +---------------- HighOffset (8-byte) 0x02
##                        +---------------- LowOffset (8-byte) 0x01
##
# PADDED-NEXT: 0x00000010 00000000 00000000 00000000 00000000
##                        |
##                        +---------------------------------- Terminating Entry (16-byte) 0x00
##
# PADDED-NEXT: 0x00000020 00010000 00000000 00020000 00000000
##                        |  |                 |
##                        |  |                 +------------- HighOffset (8-byte) 0x02
##                        |  +----------------- LowOffset (8-byte) 0x01
##                        +- Padded zeros (1-byte) 0x00
##
# PADDED-NEXT: 0x00000030 00000000 00000000 00000000 00000000
##                        | |
##                        | +-------------------------------- Terminating Entry (16-byte) 0x00
##                        +- higher byte(s) of HighOffset
##
# PADDED-NEXT: 0x00000040 00010000 00000000 00020000 00000000
##                        | |                 |
##                        | |                 +-------------- HighOffset (8-byte) 0x02
##                        | +----------------- LowOffset (8-byte) 0x01
##                        +- the last byte of terminating entry.
##
# PADDED-NEXT: 0x00000050 00000000 00000000 00000000 00000000
##                        | |
##                        | +-------------------------------- Terminating Entry (16-byte) 0x00
##                        +- higher byte(s) of HighOffset
##
# PADDED-NEXT: 0x00000060 00
##                        |
##                        +- the last byte of terminating entry.

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_ranges:
    - Entries:
        - LowOffset:  0x01
          HighOffset: 0x02
    - Offset:   0x21  ## There are 0x20 bytes before this entry.
      Entries:
        - LowOffset:  0x01
          HighOffset: 0x02
    - Offset:   0x41  ## There are 0x41 bytes before this entry.
      Entries:
        - LowOffset:  0x01
          HighOffset: 0x02

## i) Test that yaml2obj emits an error message if we try to assign an invalid offset to an
## entry of the '.debug_ranges' section.

# RUN: not yaml2obj --docnum=9 %s -o %t9.o 2>&1 | FileCheck %s --check-prefix=INVALID-OFFSET

# INVALID-OFFSET: yaml2obj: error: 'Offset' for 'debug_ranges' with index 1 must be greater than or equal to the number of bytes written already (0x20)

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_ranges:
    - Entries:
        - LowOffset:  0x01
          HighOffset: 0x02
    - Offset:   0x1F ## Must be greater than or equal to 0x20.
      Entries:
        - LowOffset:  0x01
          HighOffset: 0x02

## j) Test that yaml2obj still generates a .debug_ranges section if we assign an invalid value
## to 'AddrSize' when the 'Entries' list is empty.

# RUN: yaml2obj --docnum=10 %s -o %t10.o
# RUN: llvm-readelf --hex-dump=.debug_ranges %t10.o | \
# RUN:   FileCheck %s --check-prefix=ADDRSIZE

#      ADDRSIZE: Hex dump of section '.debug_ranges':
# ADDRSIZE-NEXT: 0x00000000 00000000 00000000 00000000 0000
##                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ terminating entry (2*AddrSize=14-byte)

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_ranges:
    - AddrSize: 0x07
      Entries:  []

## k) Test that yaml2obj emits an error message if we try to assign an invalid value to
## 'AddrSize' when the 'Entries' list isn't empty.

# RUN: not yaml2obj --docnum=11 %s 2>&1 | \
# RUN:   FileCheck %s --check-prefix=INVALID-SIZE

# INVALID-SIZE: yaml2obj: error: unable to write debug_ranges address offset: invalid integer write size: 7

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_ranges:
    - AddrSize: 0x07
      Entries:
        - LowOffset:  0x1234
          HighOffset: 0x5678

## l) Test that the .debug_ranges section header is emitted if the "debug_ranges"
## entry is empty.

# RUN: yaml2obj --docnum=12 %s -o %t12.o
# RUN: llvm-readobj -S %t12.o | FileCheck -DSIZE=0 -DADDRALIGN=1 %s --check-prefix=DWARF-HEADER

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_ranges: []