## Test that yaml2obj emits a .debug_loclists section when requested.

## a) Generate and verify a little endian DWARF32 .debug_loclists section in a 64-bit object file.

# RUN: yaml2obj --docnum=1 -DENDIAN=ELFDATA2LSB %s -o %t1.dwarf32.le.o
# RUN: llvm-readobj --sections --section-data %t1.dwarf32.le.o | \
# RUN:   FileCheck -DSIZE=133 -DADDRALIGN=1 %s --check-prefixes=SHDR,DWARF32-LE

#            SHDR: Index: 1
#       SHDR-NEXT: Name: .debug_loclists (1)
#       SHDR-NEXT: Type: SHT_PROGBITS (0x1)
#       SHDR-NEXT: Flags [ (0x0)
#       SHDR-NEXT: ]
#       SHDR-NEXT: Address: 0x0
#       SHDR-NEXT: Offset: 0x40
#       SHDR-NEXT: Size: [[SIZE]]
#       SHDR-NEXT: Link: 0
#       SHDR-NEXT: Info: 0
#       SHDR-NEXT: AddressAlignment: [[ADDRALIGN]]
#       SHDR-NEXT: EntrySize: 0
# DWARF32-LE-NEXT: SectionData (
# DWARF32-LE-NEXT:   0000: 3D000000 05000800 03000000 0C000000  |=...............|
##                         ^-------                             unit_length (4-byte)
##                                  ^---                        version (2-byte)
##                                      ^-                      address_size (1-byte)
##                                        ^-                    segment_selector_size (1-byte)
##                                           ^-------           offset_entry_count (4-byte)
##                                                    ^-------  offsets[0] (4-byte)
# DWARF32-LE-NEXT:   0010: 1B000000 2F000000 01B42402 B424A186  |..../.....$..$..|
##                         ^-------                             offsets[1] (4-byte)
##                                  ^-------                    offsets[2] (4-byte)
##                                           ^-                 DW_LLE_base_addressx
##                                             ^---             operands[0] (ULEB128) 0x1234
##                                                 ^-           DW_LLE_startx_endx
##                                                    ^---      operands[0] (ULEB128) 0x1234
##                                                        ^---  operands[1] (ULEB128) 0x4321
# DWARF32-LE-NEXT:   0020: 010411B4 249F0003 B424A186 0102117D  |....$....$.....}|
##                         --
##                           ^-                                 location descriptions length (ULEB128) 0x04
##                             ^-                               DW_OP_consts
##                               ^----                          operands[0] (SLEB128) +0x1234
##                                    ^-                        DW_OP_stack_value
##                                      ^-                      DW_LLE_end_of_list
##                                        ^-                    DW_LLE_startx_length
##                                           ^---               operands[0] (ULEB128) 0x1234
##                                               ^------        operands[1] (ULEB128) 0x4321
##                                                      ^-      location descriptions length (ULEB128) 0x02
##                                                        ^-    DW_OP_consts
##                                                          ^-  operands[0] (SLEB128) -0x03
# DWARF32-LE-NEXT:   0030: 04B424A1 86010311 B4240005 0311B424  |..$......$.....$|
##                         ^-                                   DW_LLE_offset_pair
##                           ^---                               operands[0] (ULEB128) 0x1234
##                               ^------                        operands[1] (ULEB128) 0x4321
##                                      ^-                      location descriptions length (ULEB128) 0x03
##                                        ^-                    DW_OP_consts
##                                           ^---               operands[0] (SLEB128) +0x1234
##                                               ^-             DW_LLE_end_of_list
##                                                 ^-           DW_LLE_default_location
##                                                    ^-        location descriptions length (ULEB128) 0x03
##                                                      ^-      DW_OP_consts
##                                                        ^---  operands[0] (SLEB128) +0x1234
# DWARF32-LE-NEXT:   0040: 00400000 00050008 00020000 00080000  |.@..............|
##                         ^-                                   DW_LLE_end_of_list
##                           ^--------                          unit_length (4-byte)
##                                    ^---                      version (2-byte)
##                                        ^-                    address_size (1-byte)
##                                           ^-                 segment_selector_size (1-byte)
##                                             ^--------        offset_entry_count (4-byte)
##                                                      ^-----  offsets[0] (4-byte)
# DWARF32-LE-NEXT:   0050: 00270000 00063412 00000000 00000734  |.'....4........4|
##                         --
##                           ^--------                          offsets[1] (4-byte)
##                                    ^-                        DW_LLE_base_address
##                                      ^-----------------      operands[0] (8-byte)
##                                                        ^-    DW_LLE_start_end
##                                                          ^-  operands[0] (8-byte)
# DWARF32-LE-NEXT:   0060: 12000000 00000021 43000000 00000003  |.......!C.......|
##                         ---------------
##                                        ^-----------------    operands[1] (8-byte)
##                                                          ^-  location descriptions length (ULEB128) 0x03
# DWARF32-LE-NEXT:   0070: 11B42400 08341200 00000000 00A18601  |..$..4..........|
##                         ^-                                   DW_OP_consts
##                           ^---                               operands[0] (SLEB128) +0x1234
##                               ^-                             DW_LLE_end_of_list
##                                  ^-                          DW_LLE_start_length
##                                    ^-----------------        operands[0] (8-byte)
##                                                      ^-----  operands[1] (LEB128) 0x4321
# DWARF32-LE-NEXT:   0080: 0311B424 00                          |...$.|
##                         ^-                                   location descriptions length (ULEB128) 0x03
##                           ^-                                 DW_OP_consts
##                             ^---                             operands[0] (SLEB128) +0x1234
##                                  ^-                          DW_LLE_end_of_list
# DWARF32-LE-NEXT: )

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  [[ENDIAN]]
  Type:  ET_EXEC
DWARF:
  debug_loclists:
    - Lists:
        - Entries:
            - Operator: DW_LLE_base_addressx
              Values:   [ 0x1234 ]
            - Operator: DW_LLE_startx_endx
              Values:   [ 0x1234, 0x4321 ]
              Descriptions:
                - Operator: DW_OP_consts
                  Values:   [ 0x1234 ]
                - Operator: DW_OP_stack_value
            - Operator: DW_LLE_end_of_list
        - Entries:
            - Operator: DW_LLE_startx_length
              Values:   [ 0x1234, 0x4321 ]
              Descriptions:
                - Operator: DW_OP_consts
                  ## Test a negative number (-3).
                  Values:   [ 0xfffffffffffffffd ]
            - Operator: DW_LLE_offset_pair
              Values:   [ 0x1234, 0x4321 ]
              Descriptions:
                - Operator: DW_OP_consts
                  Values:   [ 0x1234 ]
            - Operator: DW_LLE_end_of_list
        - Entries:
            - Operator: DW_LLE_default_location
              Descriptions:
                - Operator: DW_OP_consts
                  Values:   [ 0x1234 ]
            - Operator: DW_LLE_end_of_list
    - Lists:
        - Entries:
            - Operator: DW_LLE_base_address
              Values:   [ 0x1234 ]
            - Operator: DW_LLE_start_end
              Values:   [ 0x1234, 0x4321 ]
              Descriptions:
                - Operator: DW_OP_consts
                  Values:   [ 0x1234 ]
            - Operator: DW_LLE_end_of_list
        - Entries:
            - Operator: DW_LLE_start_length
              Values:   [ 0x1234, 0x4321 ]
              Descriptions:
                - Operator: DW_OP_consts
                  Values:   [ 0x1234 ]
            - Operator: DW_LLE_end_of_list

## b) Generate and verify a big endian DWARF32 .debug_loclists section in a 64-bit object file.

# RUN: yaml2obj --docnum=1 -DENDIAN=ELFDATA2MSB %s -o %t.dwarf32.be.o
# RUN: llvm-readobj --sections --section-data %t.dwarf32.be.o | \
# RUN:   FileCheck -DSIZE=133 -DADDRALIGN=1 %s --check-prefixes=SHDR,DWARF32-BE

# DWARF32-BE-NEXT: SectionData (
# DWARF32-BE-NEXT:   0000: 0000003D 00050800 00000003 0000000C  |...=............|
##                         ^-------                             unit_length (4-byte)
##                                  ^---                        version (2-byte)
##                                      ^-                      address_size (1-byte)
##                                        ^-                    segment_selector_size (1-byte)
##                                           ^-------           offset_entry_count (4-byte)
##                                                    ^-------  offsets[0] (4-byte)
# DWARF32-BE-NEXT:   0010: 0000001B 0000002F 01B42402 B424A186  |......./..$..$..|
##                         ^-------                             offsets[1] (4-byte)
##                                  ^-------                    offsets[2] (4-byte)
##                                           ^-                 DW_LLE_base_addressx
##                                             ^---             operands[0] (ULEB128) 0x1234
##                                                 ^-           DW_LLE_startx_endx
##                                                    ^---      operands[0] (ULEB128) 0x1234
##                                                        ^---  operands[1] (ULEB128) 0x4321
# DWARF32-BE-NEXT:   0020: 010411B4 249F0003 B424A186 0102117D  |....$....$.....}|
##                         --
##                           ^-                                 location descriptions length (ULEB128) 0x04
##                             ^-                               DW_OP_consts
##                               ^----                          operands[0] (SLEB128) +0x1234
##                                    ^-                        DW_OP_stack_value
##                                      ^-                      DW_LLE_end_of_list
##                                        ^-                    DW_LLE_startx_length
##                                           ^---               operands[0] (ULEB128) 0x1234
##                                               ^------        operands[1] (ULEB128) 0x4321
##                                                      ^-      location descriptions length (ULEB128) 0x02
##                                                        ^-    DW_OP_consts
##                                                          ^-  operands[0] (SLEB128) -0x03
# DWARF32-BE-NEXT:   0030: 04B424A1 86010311 B4240005 0311B424  |..$......$.....$|
##                         ^-                                   DW_LLE_offset_pair
##                           ^---                               operands[0] (ULEB128) 0x1234
##                               ^------                        operands[1] (ULEB128) 0x4321
##                                      ^-                      location descriptions length (ULEB128) 0x03
##                                        ^-                    DW_OP_consts
##                                           ^---               operands[0] (SLEB128) +0x1234
##                                               ^-             DW_LLE_end_of_list
##                                                 ^-           DW_LLE_default_location
##                                                    ^-        location descriptions length (ULEB128) 0x03
##                                                      ^-      DW_OP_consts
##                                                        ^---  operands[0] (SLEB128) +0x1234
# DWARF32-BE-NEXT:   0040: 00000000 40000508 00000000 02000000  |....@...........|
##                         ^-                                   DW_LLE_end_of_list
##                           ^--------                          unit_length (4-byte)
##                                    ^---                      version (2-byte)
##                                        ^-                    address_size (1-byte)
##                                           ^-                 segment_selector_size (1-byte)
##                                             ^--------        offset_entry_count (4-byte)
##                                                      ^-----  offsets[0] (4-byte)
# DWARF32-BE-NEXT:   0050: 08000000 27060000 00000000 12340700  |....'........4..|
##                         --
##                           ^--------                          offsets[1] (4-byte)
##                                    ^-                        DW_LLE_base_address
##                                      ^-----------------      operands[0] (8-byte)
##                                                        ^-    DW_LLE_start_end
##                                                          ^-  operands[0] (8-byte)
# DWARF32-BE-NEXT:   0060: 00000000 00123400 00000000 00432103  |......4......C!.|
##                         ---------------
##                                        ^-----------------    operands[1] (8-byte)
##                                                          ^-  location descriptions length (ULEB128) 0x03
# DWARF32-BE-NEXT:   0070: 11B42400 08000000 00000012 34A18601  |..$.........4...|
##                         ^-                                   DW_OP_consts
##                           ^---                               operands[0] (SLEB128) +0x1234
##                               ^-                             DW_LLE_end_of_list
##                                  ^-                          DW_LLE_start_length
##                                    ^-----------------        operands[0] (8-byte)
##                                                      ^-----  operands[1] (LEB128) 0x4321
# DWARF32-BE-NEXT:   0080: 0311B424 00                          |...$.|
##                         ^-                                   location descriptions length (ULEB128) 0x03
##                           ^-                                 DW_OP_consts
##                             ^---                             operands[0] (SLEB128) +0x1234
##                                  ^-                          DW_LLE_end_of_list
# DWARF32-BE-NEXT: )

## c) Generate and verify a little endian DWARF64 .debug_loclists section in a 64-bit object file.

# RUN: yaml2obj --docnum=2 -DENDIAN=ELFDATA2LSB %s -o %t2.dwarf64.le.o
# RUN: llvm-readobj --sections --section-data %t2.dwarf64.le.o | \
# RUN:   FileCheck -DSIZE=47 -DADDRALIGN=1 %s --check-prefixes=SHDR,DWARF64-LE

# DWARF64-LE-NEXT: SectionData (
# DWARF64-LE-NEXT:   0000: FFFFFFFF 23000000 00000000 05000800  |....#...........|
##                         ^-------------------------           unit_length (12-byte)
##                                                    ^---      version (2-byte)
##                                                        ^-    address_size (1-byte)
##                                                          ^-  segment_selector_size (1-byte)
# DWARF64-LE-NEXT:   0010: 02000000 10000000 00000000 1A000000  |................|
##                         ^-------                             offset_entry_count (4-byte)
##                                  ^----------------           offsets[0] (8-byte)
##                                                    ^-------  offsets[1] (8-byte)
# DWARF64-LE-NEXT:   0020: 00000000 02B424A1 86010311 B42400    |......$......$.|
##                         --------
##                                  ^-                          DW_LLE_startx_endx
##                                    ^---                      operands[0] (ULEB128) 0x1234
##                                        ^------               operands[1] (ULEB128) 0x4321
##                                               ^-             location descriptions length (ULEB128) 0x03
##                                                 ^-           DW_OP_consts
##                                                    ^---      operands[0] (SLEB128) +0x1234
##                                                        ^-    DW_LLE_end_of_list
# DWARF64-LE-NEXT: )

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  [[ENDIAN]]
  Type:  ET_EXEC
DWARF:
  debug_loclists:
    - Format:  DWARF64
      Lists:
        - Entries:
            - Operator: DW_LLE_startx_endx
              Values:   [ 0x1234, 0x4321 ]
              Descriptions:
                - Operator: DW_OP_consts
                  Values:   [ 0x1234 ]
        - Entries:
            - Operator: DW_LLE_end_of_list

## d) Generate and verify a big endian DWARF64 .debug_loclists section in a 64-bit object file.

# RUN: yaml2obj --docnum=2 -DENDIAN=ELFDATA2MSB %s -o %t2.dwarf64.be.o
# RUN: llvm-readobj --sections --section-data %t2.dwarf64.be.o | \
# RUN:   FileCheck -DSIZE=47 -DADDRALIGN=1 %s --check-prefixes=SHDR,DWARF64-BE

# DWARF64-BE-NEXT: SectionData (
# DWARF64-BE-NEXT:   0000: FFFFFFFF 00000000 00000023 00050800  |...........#....|
##                         ^-------------------------           unit_length (12-byte)
##                                                    ^---      version (2-byte)
##                                                        ^-    address_size (1-byte)
##                                                          ^-  segment_selector_size (1-byte)
# DWARF64-BE-NEXT:   0010: 00000002 00000000 00000010 00000000  |................|
##                         ^-------                             offset_entry_count (4-byte)
##                                  ^----------------           offsets[0] (8-byte)
##                                                    ^-------  offsets[1] (8-byte)
# DWARF64-BE-NEXT:   0020: 0000001A 02B424A1 86010311 B42400    |......$......$.|
##                         --------
##                                  ^-                          DW_LLE_startx_endx
##                                    ^---                      operands[0] (ULEB128) 0x1234
##                                        ^------               operands[1] (ULEB128) 0x4321
##                                               ^-             location descriptions length (ULEB128) 0x03
##                                                 ^-           DW_OP_consts
##                                                    ^---      operands[0] (SLEB128) +0x1234
##                                                        ^-    DW_LLE_end_of_list
# DWARF64-BE-NEXT: )

## e) Test that the length, version, segment_selector_size, address_size, offset_entry_count,
## offsets and location descriptions length fields can be specified manually.

# RUN: yaml2obj --docnum=3 %s -o %t3.o
# RUN: llvm-readelf --hex-dump=.debug_loclists %t3.o | \
# RUN:   FileCheck %s --check-prefix=OVERWRITE

#      OVERWRITE: Hex dump of section '.debug_loclists':
# OVERWRITE-NEXT: 0x00000000 34120000 06000303 04000000 01000000 4...............
##                           ^-------                            unit_length (4-byte) 0x1234
##                                    ^---                       version (2-byte) 0x06
##                                        ^-                     address_size (1-byte) 0x03
##                                          ^-                   segment_selector_size (1-byte) 0x03
##                                             ^-------          offset_entry_count (4-byte) 0x04
##                                                      ^------- offsets[0] (4-byte) 0x01
# OVERWRITE-NEXT: 0x00000010 02b424a1 8601a186 019f00            ..$........
##                           ^-                                  DW_LLE_startx_endx
##                             ^---                              operands[0] (ULEB128) 0x1234
##                                 ^------                       operands[1] (ULEB128) 0x4321
##                                        ^------                location descriptions length (ULEB128) 0x4321
##                                               ^-              DW_OP_stack_value
##                                                 ^-            DW_LLE_end_of_list

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_loclists:
    - Length:              0x1234
      Version:             6
      AddressSize:         3
      SegmentSelectorSize: 3
      OffsetEntryCount:    4
      Offsets:             [ 0x01 ]
      Lists:
        - Entries:
            - Operator:           DW_LLE_startx_endx
              Values:             [ 0x1234, 0x4321 ]
              DescriptionsLength: 0x4321
              Descriptions:
                - Operator: DW_OP_stack_value
        - Entries:
            - Operator: DW_LLE_end_of_list

## f) Test that location descriptions can be omitted from the YAML description.

# RUN: yaml2obj --docnum=4 %s -o %t4.o
# RUN: llvm-readelf --hex-dump=.debug_loclists %t4.o | \
# RUN:   FileCheck %s --check-prefix=OMIT-DESCRIPTIONS

#      OMIT-DESCRIPTIONS: Hex dump of section '.debug_loclists':
# OMIT-DESCRIPTIONS-NEXT: 0x00000000 42000000 05000800 01000000 04000000 B...............
# OMIT-DESCRIPTIONS-NEXT: 0x00000010 02b424a1 86010003 b424a186 010004b4 ..$......$......
##                                  ^-                                  DW_LLE_startx_endx
##                                    ^---                              operands[0] (ULEB128) 0x1234
##                                        ^------                       operands[1] (ULEB128) 0x4321
##                                               ^-                     location descriptions length (ULEB128) 0x00
##                                                 ^-                   DW_LLE_startx_length
##                                                    ^---              operands[0] (ULEB128) 0x1234
##                                                        ^------       operands[1] (ULEB128) 0x4321
##                                                               ^-     location descriptions length (ULEB128) 0x00
##                                                                 ^-   DW_LLE_offset_pair
##                                                                   ^- operands[0] (ULEB128) 0x1234
# OMIT-DESCRIPTIONS-NEXT: 0x00000020 24a18601 00050007 34120000 00000000 $.......4.......
##                                  --
##                                    ^-----                            operands[1] (ULEB128) 0x4321
##                                           ^-                         location descriptions length (ULEB128) 0x00
##                                             ^-                       DW_LLE_default_location
##                                               ^-                     location descriptions length (ULEB128) 0x00
##                                                 ^-                   DW_LLE_start_end
##                                                    ^---------------- operands[0] (8-byte)
# OMIT-DESCRIPTIONS-NEXT: 0x00000030 21430000 00000000 00083412 00000000 !C........4.....
##                                  ^----------------                   operands[1] (8-byte)
##                                                    ^-                location descriptions length (ULEB128) 0x00
##                                                      ^-              DW_LLE_start_length
##                                                        ^------------ operands[0] (8-byte)
# OMIT-DESCRIPTIONS-NEXT: 0x00000040 0000a186 0100                       ......
##                                  ----
##                                      ^------                         operands[1] (ULEB128) 0x4321
##                                             ^-                       location descriptions length (ULEB128) 0x00

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_loclists:
    - Lists:
        - Entries:
            - Operator: DW_LLE_startx_endx
              Values:   [ 0x1234, 0x4321 ]
            - Operator: DW_LLE_startx_length
              Values:   [ 0x1234, 0x4321 ]
            - Operator: DW_LLE_offset_pair
              Values:   [ 0x1234, 0x4321 ]
            - Operator: DW_LLE_default_location
            - Operator: DW_LLE_start_end
              Values:   [ 0x1234, 0x4321 ]
            - Operator: DW_LLE_start_length
              Values:   [ 0x1234, 0x4321 ]

## g) Test that the default value of the address_size field in a 32-bit object file is 4.

# RUN: yaml2obj --docnum=5 %s -o %t5.o
# RUN: llvm-readelf --hex-dump=.debug_loclists %t5.o | \
# RUN:   FileCheck %s --check-prefix=ADDRSIZE32

#      ADDRSIZE32: Hex dump of section '.debug_loclists':
# ADDRSIZE32-NEXT: 0x00000000 24000000 05000400 01000000 04000000 $...............
##                                         ^-                     address_size (1-byte) 0x04
# ADDRSIZE32-NEXT: 0x00000010 06341200 00073412 00002143 00000008 .4....4...!C....
##                            ^-                                  DW_LLE_base_address
##                              ^--------                         operands[0] (4-byte)
##                                       ^-                       DW_LLE_start_end
##                                         ^--------              operands[0] (4-byte)
##                                                  ^--------     operands[1] (4-byte)
##                                                           ^-   counted location description
##                                                             ^- DW_LLE_start_length
# ADDRSIZE32-NEXT: 0x00000020 34120000 a1860100                   4.......
##                            ^-------                            operands[0] (4-byte)
##                                     ^-----                     operands[1] (ULEB128) 0x4321
##                                           ^-                   counted location description

--- !ELF
FileHeader:
  Class: ELFCLASS32
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_loclists:
    - Lists:
        - Entries:
            - Operator: DW_LLE_base_address
              Values:   [ 0x1234 ]
            - Operator: DW_LLE_start_end
              Values:   [ 0x1234, 0x4321 ]
            - Operator: DW_LLE_start_length
              Values:   [ 0x1234, 0x4321 ]

## h) Test that the address_size field can be specified manually and the size of
## corresponding operands will be changed accordingly.

# RUN: yaml2obj --docnum=6 %s -o %t6.o
# RUN: llvm-readelf --hex-dump=.debug_loclists %t6.o | \
# RUN:   FileCheck %s --check-prefix=ADDRSIZE32

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_loclists:
    - AddressSize: 4
      Lists:
        - Entries:
            - Operator: DW_LLE_base_address
              Values:   [ 0x1234 ]
            - Operator: DW_LLE_start_end
              Values:   [ 0x1234, 0x4321 ]
            - Operator: DW_LLE_start_length
              Values:   [ 0x1234, 0x4321 ]

## i) Test that yaml2obj emits an error message if we try to assign an invalid value to
## 'AddressSize' when there is an entry whose operands contain address.

# RUN: not yaml2obj -DOPERATOR=base_address -DVALUES=[0x01] --docnum=7 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=base_address %s --check-prefix=INVALID-ADDRSIZE

# RUN: not yaml2obj -DOPERATOR=start_end -DVALUES=[0x01,0x02] --docnum=7 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=start_end %s --check-prefix=INVALID-ADDRSIZE

# RUN: not yaml2obj -DOPERATOR=start_length -DVALUES=[0x01,0x02] --docnum=7 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=start_length %s --check-prefix=INVALID-ADDRSIZE

# INVALID-ADDRSIZE: yaml2obj: error: unable to write address for the operator DW_LLE_[[OPERATOR]]: invalid integer write size: 3

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_loclists:
    - AddressSize: 3
      Lists:
        - Entries:
            - Operator: DW_LLE_[[OPERATOR]]
              Values:   [[VALUES]]

## j) Test that yaml2obj emits an error message if we specify invalid numbers of operands
## for a location list encoding.

# RUN: not yaml2obj -DOPERATOR=end_of_list -DVALUES=[0x01] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=end_of_list -DACTUAL=1 -DEXPECTED=0 %s --check-prefix=INVALID-LLE-OPERANDS

# RUN: not yaml2obj -DOPERATOR=base_addressx -DVALUES=[] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=base_addressx -DACTUAL=0 -DEXPECTED=1 %s --check-prefix=INVALID-LLE-OPERANDS

# RUN: not yaml2obj -DOPERATOR=startx_endx -DVALUES=[0x01] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=startx_endx -DACTUAL=1 -DEXPECTED=2 %s --check-prefix=INVALID-LLE-OPERANDS

# RUN: not yaml2obj -DOPERATOR=startx_length -DVALUES=[0x01] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=startx_length -DACTUAL=1 -DEXPECTED=2 %s --check-prefix=INVALID-LLE-OPERANDS

# RUN: not yaml2obj -DOPERATOR=offset_pair -DVALUES=[] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=offset_pair -DACTUAL=0 -DEXPECTED=2 %s --check-prefix=INVALID-LLE-OPERANDS

# RUN: not yaml2obj -DOPERATOR=default_location -DVALUES=[0x01] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=default_location -DACTUAL=1 -DEXPECTED=0 %s --check-prefix=INVALID-LLE-OPERANDS

# RUN: not yaml2obj -DOPERATOR=base_address -DVALUES=[0x01,0x02] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=base_address -DACTUAL=2 -DEXPECTED=1 %s --check-prefix=INVALID-LLE-OPERANDS

# RUN: not yaml2obj -DOPERATOR=start_end -DVALUES=[0x01,0x02,0x03] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=start_end -DACTUAL=3 -DEXPECTED=2 %s --check-prefix=INVALID-LLE-OPERANDS

# RUN: not yaml2obj -DOPERATOR=start_length -DVALUES=[0x01] --docnum=8 %s 2>&1 | \
# RUN:   FileCheck -DOPERATOR=start_length -DACTUAL=1 -DEXPECTED=2 %s --check-prefix=INVALID-LLE-OPERANDS

# INVALID-LLE-OPERANDS: yaml2obj: error: invalid number ([[ACTUAL]]) of operands for the operator: DW_LLE_[[OPERATOR]], [[EXPECTED]] expected

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_loclists:
    - Lists:
        - Entries:
            - Operator: DW_LLE_[[OPERATOR]]
              Values:   [[VALUES]]

## k) Test that yaml2obj emits an error message if we specify invalid numbers of operands
## for a DWARF expression operator.

# RUN: not yaml2obj --docnum=9 -DOPERATOR=consts -DVALUES=[0x01,0x02] %s 2>&1 | \
# RUN:   FileCheck -DACTUAL=2 -DEXPECTED=1 -DOPERATOR=consts %s --check-prefix=INVALID-OP-OPERANDS

# RUN: not yaml2obj --docnum=9 -DOPERATOR=stack_value -DVALUES=[0x01] %s 2>&1 | \
# RUN:   FileCheck -DACTUAL=1 -DEXPECTED=0 -DOPERATOR=stack_value %s --check-prefix=INVALID-OP-OPERANDS

# INVALID-OP-OPERANDS: yaml2obj: error: invalid number ([[ACTUAL]]) of operands for the operator: DW_OP_[[OPERATOR]], [[EXPECTED]] expected

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_loclists:
    - Lists:
        - Entries:
            - Operator: DW_LLE_startx_endx
              Values:   [ 0x01, 0x02 ]
              Descriptions:
                - Operator: DW_OP_[[OPERATOR]]
                  Values:   [[VALUES]]

## l) Test that an empty list is allowed for a location list table.

# RUN: yaml2obj --docnum=10 %s -o %t10.o
# RUN: llvm-readelf --hex-dump=.debug_loclists %t10.o | \
# RUN:   FileCheck %s --check-prefix=EMPTY-LIST

#      EMPTY-LIST: Hex dump of section '.debug_loclists':
# EMPTY-LIST-NEXT: 0x00000000 08000000 05000800 00000000 ............
##                            ^-------                   unit_length (4-byte)
##                                     ^---              version (2-byte)
##                                         ^-            address_size (1-byte)
##                                           ^-          segment_selector_size (1-byte)
##                                              ^------- offset_entry_count (4-byte)

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_loclists:
    - Lists: []

## m) Generate the .debug_loclists section from raw section content.

# RUN: yaml2obj --docnum=11 %s -o %t11.o
# RUN: llvm-readobj --sections --section-data %t11.o | \
# RUN:   FileCheck %s -DSIZE=3 -DADDRALIGN=0 --check-prefixes=SHDR,ARBITRARY-CONTENT

#      ARBITRARY-CONTENT: SectionData (
# ARBITRARY-CONTENT-NEXT:   0000: 112233
# ARBITRARY-CONTENT-NEXT: )

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:    .debug_loclists
    Type:    SHT_PROGBITS
    Content: "112233"

## n) Generate the .debug_loclists section when the "Size" is specified.

# RUN: yaml2obj --docnum=12 %s -o %t12.o
# RUN: llvm-readelf --hex-dump=.debug_loclists %t12.o | \
# RUN:   FileCheck %s --check-prefix=SIZE

#       SIZE: Hex dump of section '.debug_loclists':
#  SIZE-NEXT: 0x00000000 00000000 00000000 00000000 00000000 ................
# SIZE-EMPTY:

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name: .debug_loclists
    Type: SHT_PROGBITS
    Size: 0x10

## o) Test that yaml2obj emits an error message when both the "Size" and the
## "debug_loclists" entry are specified at the same time.

# RUN: not yaml2obj --docnum=13 %s 2>&1 | FileCheck %s --check-prefix=ERROR

# ERROR: yaml2obj: error: cannot specify section '.debug_loclists' contents in the 'DWARF' entry and the 'Content' or 'Size' in the 'Sections' entry at the same time

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name: .debug_loclists
    Type: SHT_PROGBITS
    Size: 0x10
DWARF:
  debug_loclists:
    - Lists: []

## p) Test that yaml2obj emits an error message when both the "Content" and the
## "debug_loclists" entry are specified at the same time.

# RUN: not yaml2obj --docnum=14 %s 2>&1 | FileCheck %s --check-prefix=ERROR

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:    .debug_loclists
    Type:    SHT_PROGBITS
    Content: "00"
DWARF:
  debug_loclists:
    - Lists: []

## q) Test that all the properties can be overridden by the section header when
## the "debug_loclists" entry doesn't exist.

# RUN: yaml2obj --docnum=15 %s -o %t15.o
# RUN: llvm-readelf --sections %t15.o | FileCheck %s --check-prefix=OVERRIDDEN

#      OVERRIDDEN: [Nr] Name            Type   Address          Off    Size   ES Flg Lk Inf Al
#      OVERRIDDEN: [ 1] .debug_loclists STRTAB 0000000000002020 000050 00000c 01   A  2   1  2
# OVERRIDDEN-NEXT: [ 2] .sec            STRTAB 0000000000000000 00005c 000000 00      0   0  0

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:         .debug_loclists
    Type:         SHT_STRTAB  ## SHT_PROGBITS by default.
    Flags:        [SHF_ALLOC] ## 0 by default.
    Link:         .sec        ## 0 by default.
    EntSize:      1           ## 0 by default.
    Info:         1           ## 0 by default.
    AddressAlign: 2           ## 0 by default.
    Address:      0x2020      ## 0x00 by default.
    Offset:       0x50        ## 0x40 for the first section.
    Size:         0x0c        ## Set the "Size" so that we can reuse the check tag "OVERRIDDEN".
  - Name:         .sec        ## Linked by .debug_loclists.
    Type:         SHT_STRTAB

## r) Test that all the properties can be overridden by the section header when
## the "debug_loclists" entry exists.

# RUN: yaml2obj --docnum=16 %s -o %t16.o
# RUN: llvm-readelf --sections %t16.o | FileCheck %s --check-prefix=OVERRIDDEN

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:         .debug_loclists
    Type:         SHT_STRTAB  ## SHT_PROGBITS by default.
    Flags:        [SHF_ALLOC] ## 0 by default.
    Link:         .sec        ## 0 by default.
    EntSize:      1           ## 0 by default.
    Info:         1           ## 0 by default.
    AddressAlign: 2           ## 1 by default.
    Address:      0x2020      ## 0x00 by default.
    Offset:       0x50        ## 0x40 for the first section.
  - Name:         .sec        ## Linked by .debug_loclists.
    Type:         SHT_STRTAB
DWARF:
  debug_loclists:
    - Lists: []

## s) Test that the .debug_loclists section header is emitted if the "debug_loclists"
## entry is empty.

# RUN: yaml2obj --docnum=17 %s -o %t17.o
# RUN: llvm-readobj --sections --section-data %t17.o | \
# RUN:   FileCheck -DSIZE=0 -DADDRALIGN=1 %s --check-prefixes=SHDR,EMPTY-CONTENT

# EMPTY-CONTENT-NEXT: SectionData (
# EMPTY-CONTENT-NEXT: )

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_loclists: []

## t) Test that yaml2obj emits an error message if we use an unimplemented DWARF expression
## operator.

# RUN: not yaml2obj --docnum=18 -DOP=0x01 %s 2>&1 | \
# RUN:   FileCheck -DOP=0x1 %s --check-prefix=UNSUPPORTED-OP

# UNSUPPORTED-OP: yaml2obj: error: DWARF expression: [[OP]] is not supported

# RUN: not yaml2obj --docnum=18 -DOP=DW_OP_entry_value %s 2>&1 | \
# RUN:   FileCheck -DOP=DW_OP_entry_value %s --check-prefix=UNSUPPORTED-OP


--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_loclists:
    - Lists:
        - Entries:
            - Operator: DW_LLE_default_location
              Descriptions:
                - Operator: [[OP]]

## u) Test that we are able to generate a location list via raw binary data.

# RUN: yaml2obj --docnum=19 %s -o %t19.o
# RUN: llvm-readelf --hex-dump=.debug_loclists %t19.o | \
# RUN:   FileCheck %s --check-prefix=CUSTOM-LIST

#      CUSTOM-LIST: Hex dump of section '.debug_loclists':
# CUSTOM-LIST-NEXT: 0x00000000 2a000000 05000800 03000000 0c000000 *...............
##                             ^-------                            unit_length (4-byte)
##                                      ^---                       version (2-byte)
##                                          ^-                     address_size (1-byte)
##                                            ^-                   segment_selector_size (1-byte)
##                                               ^-------          offset_entry_count (4-byte)
##                                                        ^------- offsets[0] (4-byte)
# CUSTOM-LIST-NEXT: 0x00000010 12000000 1a000000 02b424b4 24001234 ..........$.$..4
##                             ^-------                            offsets[1] (4-byte)
##                                      ^-------                   offsets[2] (4-byte)
##                                               ^-                DW_LLE_startx_endx
##                                                 ^---            operands[0] (ULEB128) 0x1234
##                                                     ^----       operands[1] (ULEB128) 0x1234
##                                                          ^-     location descriptions length (ULEB128) 0x00
##                                                            ^--- custom list content
# CUSTOM-LIST-NEXT: 0x00000020 567890ab cdefabcd ef123456 7890     Vx........4Vx.
##                             -------------
##                                          ^-----------------     custom list content

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_loclists:
    - Lists:
        - Entries:
            - Operator: DW_LLE_startx_endx
              Values:   [ 0x1234, 0x1234 ]
        - Content: '1234567890abcdef'
        - Content: 'abcdef1234567890'

## v) Test that yaml2obj emits an error message when 'Content' and 'Entries' are specified
## at the same time.

# RUN: not yaml2obj --docnum=20 %s 2>&1 | FileCheck %s --check-prefix=ERR

#      ERR: YAML:{{.*}}: error: Entries and Content can't be used together
# ERR-NEXT:         - Entries: []
# ERR-NEXT:           ^

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_loclists:
    - Lists:
        - Entries: []
          Content: ''

## w) Test that when the "OffsetEntryCount" is specified to be 0 and "Offsets" is not specified,
## the offsets array is not emitted.

# RUN: yaml2obj --docnum=21 -DOFFSETENTRIES=0 %s -o %t21.o
# RUN: llvm-readelf --hex-dump=.debug_loclists %t21.o | \
# RUN:   FileCheck %s --check-prefix=NO-OFFSETS

#      NO-OFFSETS: Hex dump of section '.debug_loclists':
# NO-OFFSETS-NEXT: 0x00000000 0e000000 05000800 00000000 01010201 ................
##                            ^-------                            unit_length (4-byte)
##                                     ^---                       version (2-byte)
##                                         ^-                     address_size (1-byte)
##                                           ^-                   segment_selector_size (1-byte)
##                                              ^-------          offset_entry_count (4-byte)
##                                                       ^-       DW_LLE_base_addressx
##                                                         ^-     operands[0] (ULEB128) 0x01
##                                                           ^-   DW_LLE_startx_endx
##                                                             ^- operands[0] (ULEB128) 0x01
# NO-OFFSETS-NEXT: 0x00000010 0200                                ..
##                            ^-                                  operands[1] (ULEB128) 0x02
##                              ^-                                location descriptions length (ULEB128) 0x00

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_loclists:
    - OffsetEntryCount: [[OFFSETENTRIES=<none>]]
      Offsets:          [[OFFSETS=<none>]]
      Lists:
        - Entries:
            - Operator: DW_LLE_base_addressx
              Values:   [ 0x01 ]
            - Operator: DW_LLE_startx_endx
              Values:   [ 0x01, 0x02 ]

## x) Test that when the "Offsets" entry is specified to be empty and the "OffsetEntryCount" is not specified,
## the offsets array will be omitted.

# RUN: yaml2obj --docnum=21 -DOFFSETS=[] %s -o %t22.o
# RUN: llvm-readelf --hex-dump=.debug_loclists %t22.o | \
# RUN:   FileCheck %s --check-prefix=NO-OFFSETS

## y) Test that if "Offsets" is specified, the offsets array will be emitted accordingly, even when
## the "OffsetEntryCount" is specified to be 0.

# RUN: yaml2obj --docnum=21 -DOFFSETENTRIES=0 -DOFFSETS=[0x01,0x02,0x03] %s -o %t23.o
# RUN: llvm-readelf --hex-dump=.debug_loclists %t23.o | \
# RUN:   FileCheck %s --check-prefix=OFFSETS

#      OFFSETS: Hex dump of section '.debug_loclists':
# OFFSETS-NEXT: 0x00000000 0e000000 05000800 00000000 01000000 ................
##                         ^-------                            unit_length (4-byte)
##                                  ^---                       version (2-byte)
##                                      ^-                     address_size (1-byte)
##                                        ^-                   segment_selector_size (1-byte)
##                                           ^-------          offset_entry_count (4-byte)
##                                                    ^------- offsets[0] (4-byte)
# OFFSETS-NEXT: 0x00000010 02000000 03000000 01010201 0200     ..............
##                         ^-------                            offsets[1] (4-byte)
##                                  ^-------                   offsets[2] (4-byte)
##                                           ^-                DW_LLE_base_addressx
##                                             ^-              operands[0] (ULEB128) 0x01
##                                               ^-            DW_LLE_startx_endx
##                                                 ^-          operands[0] (ULEB128) 0x01
##                                                    ^-       operands[1] (ULEB128) 0x02
##                                                      ^-     location descriptions length (ULEB128) 0x00