## Test that yaml2obj emits .debug_line section.

## a) Generate the .debug_line section from the "DWARF" entry.

## Generate and verify a little endian DWARF32 .debug_line section.

# RUN: yaml2obj --docnum=1 -DENDIAN=ELFDATA2LSB %s -o %t1.le.o
# RUN: llvm-readobj --sections --section-data %t1.le.o | \
# RUN:   FileCheck %s -DSIZE=50 -DADDRALIGN=1 --check-prefixes=SHDR,DWARF-LE-CONTENT

#                  SHDR: Index: 1
#             SHDR-NEXT: Name: .debug_line (1)
#             SHDR-NEXT: Type: SHT_PROGBITS (0x1)
#             SHDR-NEXT: Flags [ (0x0)
#             SHDR-NEXT: ]
#             SHDR-NEXT: Address: 0x0
#             SHDR-NEXT: Offset: 0x40
#             SHDR-NEXT: Size: [[SIZE]]
#             SHDR-NEXT: Link: 0
#             SHDR-NEXT: Info: 0
#             SHDR-NEXT: AddressAlignment: [[ADDRALIGN]]
#             SHDR-NEXT: EntrySize: 0
# DWARF-LE-CONTENT-NEXT: SectionData (
# DWARF-LE-CONTENT-NEXT:   0000: 70000000 02003200 00000102 03040501
##                               |        |   |        | |  | | | |
##                               |        |   |        | |  | | | +- standard_opcode_lengths[DW_LNS_copy] (1-byte) 0x01
##                               |        |   |        | |  | | +- opcode_base (1-byte) 0x05
##                               |        |   |        | |  | +- line_range (1-byte) 0x04
##                               |        |   |        | |  +- line_base (signed 1-byte) 0x03
##                               |        |   |        | +- default_is_stmt (1-byte) 0x02
##                               |        |   |        +- minimum_instruction_length (1-byte) 0x01
##                               |        |   +-------- prologue_length (4-byte) 50
##                               |        +--- version (2-byte) 0x02
##                               +------- unit_length (4-byte) 0x70
##
# DWARF-LE-CONTENT-NEXT:   0010: 02030405 06070809 64697231 00646972
##                               | | | |  | | | |  |          |
##                               | | | |  | | | |  |          +----- include_directories[2] "dir2\0"
##                               | | | |  | | | |  +---------- include_directories[1] "dir1\0"
##                               | | | |  | | | +- standard_opcode_lengths[DW_LNS_fixed_advance_pc] (1-byte) 0x09
##                               | | | |  | | +- standard_opcode_lengths[DW_LNS_const_add_pc] (1-byte) 0x08
##                               | | | |  | +- standard_opcode_lengths[DW_LNS_set_basic_block] (1-byte) 0x07
##                               | | | |  +- standard_opcode_lengths[DW_LNS_negate_stmt] (1-byte) 0x06
##                               | | | +- standard_opcode_lengths[DW_LNS_set_column] (1-byte) 0x05
##                               | | +- standard_opcode_lengths[DW_LNS_set_file] (1-byte) 0x04
##                               | +- standard_opcode_lengths[DW_LNS_advance_line] (1-byte) 0x03
##                               +- standard_opcode_lengths[DW_LNS_advance_pc] (1-byte) 0x02
##
# DWARF-LE-CONTENT-NEXT:   0020: 32000061 2E630001 0203622E 63000203
##                               |   | |        |  | | |        | |
##                               |   | |        |  | | |        | +- ModTime (ULEB128) 0x03
##                               |   | |        |  | | |        +- DirIndex (ULEB128) 0x02
##                               |   | |        |  | | +-------- file_names[2] "b.c\0"
##                               |   | |        |  | +- Length (ULEB128) 0x03
##                               |   | |        |  +- ModTime (ULEB128) 0x02
##                               |   | |        +- DirIndex (ULEB128) 0x01
##                               |   | +-------- file_names[1] "a.c\0"
##                               |   +- terminating entry (1-byte) 0x00
##                               +--- the last two bytes of "dir2\0"
##
# DWARF-LE-CONTENT-NEXT:   0030: 0400
##                               | |
##                               | +- terminating entry (1-byte) 0x00
##                               +- Length (ULEB128) 0x04
# DWARF-LE-CONTENT-NEXT: )

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  [[ENDIAN]]
  Type:  ET_EXEC
DWARF:
  debug_line:
    - Length:         0x70
      Version:        2
      PrologueLength: 50
      MinInstLength:  1
      DefaultIsStmt:  2
      LineBase:       3
      LineRange:      4
      OpcodeBase:     5
      StandardOpcodeLengths: [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ]
      IncludeDirs:
        - dir1
        - dir2
      Files:
        - Name:    "a.c"
          DirIdx:  1
          ModTime: 2
          Length:  3
        - Name:    "b.c"
          DirIdx:  2
          ModTime: 3
          Length:  4

## Generate and verify a big endian DWARF32 .debug_line section.

# RUN: yaml2obj --docnum=1 -DENDIAN=ELFDATA2MSB %s -o %t1.be.o
# RUN: llvm-readobj --sections --section-data %t1.be.o | \
# RUN:   FileCheck %s -DSIZE=50 -DADDRALIGN=1 --check-prefixes=SHDR,DWARF-BE-CONTENT

# DWARF-BE-CONTENT-NEXT: SectionData (
# DWARF-BE-CONTENT-NEXT:   0000: 00000070 00020000 00320102 03040501
##                               |        |   |        | |  | | | |
##                               |        |   |        | |  | | | +- standard_opcode_lengths[DW_LNS_copy] (1-byte) 0x01
##                               |        |   |        | |  | | +- opcode_base (1-byte) 0x05
##                               |        |   |        | |  | +- line_range (1-byte) 0x04
##                               |        |   |        | |  +- line_base (signed 1-byte) 0x03
##                               |        |   |        | +- default_is_stmt (1-byte) 0x02
##                               |        |   |        +- minimum_instruction_length (1-byte) 0x01
##                               |        |   +-------- prologue_length (4-byte) 50
##                               |        +--- version (2-byte) 0x02
##                               +------- unit_length (4-byte) 0x70
##
# DWARF-BE-CONTENT-NEXT:   0010: 02030405 06070809 64697231 00646972
##                               | | | |  | | | |  |          |
##                               | | | |  | | | |  |          +----- include_directories[2] "dir2\0"
##                               | | | |  | | | |  +---------- include_directories[1] "dir1\0"
##                               | | | |  | | | +- standard_opcode_lengths[DW_LNS_fixed_advance_pc] (1-byte) 0x09
##                               | | | |  | | +- standard_opcode_lengths[DW_LNS_const_add_pc] (1-byte) 0x08
##                               | | | |  | +- standard_opcode_lengths[DW_LNS_set_basic_block] (1-byte) 0x07
##                               | | | |  +- standard_opcode_lengths[DW_LNS_negate_stmt] (1-byte) 0x06
##                               | | | +- standard_opcode_lengths[DW_LNS_set_column] (1-byte) 0x05
##                               | | +- standard_opcode_lengths[DW_LNS_set_file] (1-byte) 0x04
##                               | +- standard_opcode_lengths[DW_LNS_advance_line] (1-byte) 0x03
##                               +- standard_opcode_lengths[DW_LNS_advance_pc] (1-byte) 0x02
##
# DWARF-BE-CONTENT-NEXT:   0020: 32000061 2E630001 0203622E 63000203
##                               |   | |        |  | | |        | |
##                               |   | |        |  | | |        | +- ModTime (ULEB128) 0x03
##                               |   | |        |  | | |        +- DirIndex (ULEB128) 0x02
##                               |   | |        |  | | +-------- file_names[2] "b.c\0"
##                               |   | |        |  | +- Length (ULEB128) 0x03
##                               |   | |        |  +- ModTime (ULEB128) 0x02
##                               |   | |        +- DirIndex (ULEB128) 0x01
##                               |   | +-------- file_names[1] "a.c\0"
##                               |   +- terminating entry (1-byte) 0x00
##                               +--- the last two bytes of "dir2\0"
##
# DWARF-BE-CONTENT-NEXT:   0030: 0400
##                               | |
##                               | +- terminating entry (1-byte) 0x00
##                               +- Length (ULEB128) 0x04
# DWARF-BE-CONTENT-NEXT: )

## b) Generate the .debug_line section from raw section content.

# RUN: yaml2obj --docnum=2 %s -o %t2.o
# RUN: llvm-readobj --sections --section-data %t2.o | \
# RUN:   FileCheck %s -DSIZE=3 -DADDRALIGN=0 --check-prefixes=SHDR,ARBITRARY-CONTENT

#      ARBITRARY-CONTENT: SectionData (
# ARBITRARY-CONTENT-NEXT:   0000: 112233 |."3|
# ARBITRARY-CONTENT-NEXT: )

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:    .debug_line
    Type:    SHT_PROGBITS
    Content: "112233"

## c) Generate the .debug_line section when the "Size" is specified.

# RUN: yaml2obj --docnum=3 %s -o %t3.o
# RUN: llvm-readobj --sections --section-data %t3.o | \
# RUN:   FileCheck %s -DSIZE=16 -DADDRALIGN=0 --check-prefixes=SHDR,SIZE

#      SIZE: SectionData (
# SIZE-NEXT:   0000: 00000000 00000000 00000000 00000000 |................|
# SIZE-NEXT: )

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name: .debug_line
    Type: SHT_PROGBITS
    Size: 0x10

## d) Test that yaml2obj emits an error message when both the "Size" and the
## "debug_line" entry are specified at the same time.

# RUN: not yaml2obj --docnum=4 %s 2>&1 | FileCheck %s --check-prefix=ERROR

# ERROR: yaml2obj: error: cannot specify section '.debug_line' contents in the 'DWARF' entry and the 'Content' or 'Size' in the 'Sections' entry at the same time

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name: .debug_line
    Type: SHT_PROGBITS
    Size: 0x10
DWARF:
  debug_line:
    - Length:                0x70
      Version:               2
      PrologueLength:        50
      MinInstLength:         1
      DefaultIsStmt:         1
      LineBase:              1
      LineRange:             14
      OpcodeBase:            13
      StandardOpcodeLengths: []

## e) Test that yaml2obj emits an error message when both the "Content" and the
## "debug_line" entry are specified at the same time.

# RUN: not yaml2obj --docnum=5 %s 2>&1 | FileCheck %s --check-prefix=ERROR

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:    .debug_line
    Type:    SHT_PROGBITS
    Content: "00"
DWARF:
  debug_line:
    - Length:                0x70
      Version:               2
      PrologueLength:        50
      MinInstLength:         1
      DefaultIsStmt:         1
      LineBase:              1
      LineRange:             14
      OpcodeBase:            13
      StandardOpcodeLengths: []

## f) Test that all the properties can be overridden by the section header when
## the "debug_line" entry doesn't exist.

# RUN: yaml2obj --docnum=6 %s -o %t6.o
# RUN: llvm-readelf --sections %t6.o | FileCheck %s --check-prefix=OVERRIDDEN

#      OVERRIDDEN: [Nr] Name        Type   Address          Off    Size   ES Flg Lk Inf Al
#      OVERRIDDEN: [ 1] .debug_line STRTAB 0000000000002020 000050 000011 01   A  2   1  2
# OVERRIDDEN-NEXT: [ 2] .sec        STRTAB 0000000000000000 000061 000000 00      0   0  0

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:         .debug_line
    Type:         SHT_STRTAB  # SHT_PROGBITS by default.
    Flags:        [SHF_ALLOC] # 0 by default.
    Link:         .sec        # 0 by default.
    EntSize:      1           # 0 by default.
    Info:         1           # 0 by default.
    AddressAlign: 2           # 0 by default.
    Address:      0x2020      # 0x00 by default.
    Offset:       0x50        # 0x40 for the first section.
    Size:         0x11        # Set the "Size" so that we can reuse the check tag "OVERRIDDEN".
  - Name:         .sec        # Linked by .debug_line.
    Type:         SHT_STRTAB

## g) Test that all the properties can be overridden by the section header when
## the "debug_line" entry exists.

# RUN: yaml2obj --docnum=7 %s -o %t7.o
# RUN: llvm-readelf --sections %t7.o | FileCheck %s --check-prefix=OVERRIDDEN

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
Sections:
  - Name:         .debug_line
    Type:         SHT_STRTAB  # SHT_PROGBITS by default.
    Flags:        [SHF_ALLOC] # 0 by default.
    Link:         .sec        # 0 by default.
    EntSize:      1           # 0 by default.
    Info:         1           # 0 by default.
    AddressAlign: 2           # 1 by default.
    Address:      0x2020      # 0x00 by default.
    Offset:       0x50        # 0x40 for the first section.
  - Name:         .sec        # Linked by .debug_line.
    Type:         SHT_STRTAB
DWARF:
  debug_line:
    - Length:                0x70
      Version:               2
      PrologueLength:        50
      MinInstLength:         1
      DefaultIsStmt:         1
      LineBase:              1
      LineRange:             14
      OpcodeBase:            13
      StandardOpcodeLengths: []

## h) Test that the address size is inferred from the target machine.

# RUN: yaml2obj --docnum=8 -DBITS=64 -DADDR=0x1234567890abcdef %s -o %t8.64-bit.o
# RUN: llvm-readelf --hex-dump=.debug_line %t8.64-bit.o | \
# RUN:   FileCheck %s --check-prefix=ADDRSIZE -DADDR="efcdab90 78563412"

#      ADDRSIZE: Hex dump of section '.debug_line':
# ADDRSIZE-NEXT: 0x00000000 34120000 02003412 00000101 010e0d00 4.....4.........
##                          ^-------                            unit_length (4-byte)
##                                   ^---                       version (2-byte)
##                                       ^--------              header_length (4-byte)
##                                                ^-            minimum_instruction_length (1-byte)
##                                                  ^-          default_is_stmt (1-byte)
##                                                     ^-       line_base (1-byte)
##                                                       ^-     line_range (1-byte)
##                                                         ^-   opcode_base (1-byte)
##                                                           ^- null byte for terminating include_directories
# ADDRSIZE-NEXT: 0x00000010 00000902 [[ADDR]]
##                          ^-                                  null byte for terminating file_names
##                            ^-                                DW_LNS_extended_op
##                              ^-                              extended op length (ULEB128) 0x09
##                                ^-                            DW_LNE_set_address
##                                   ^-------                   address

# RUN: yaml2obj --docnum=8 -DBITS=32 -DADDR=0x12345678 %s -o %t8.32-bit.o
# RUN: llvm-readelf --hex-dump=.debug_line %t8.32-bit.o | \
# RUN:   FileCheck %s --check-prefix=ADDRSIZE -DADDR="78563412"

--- !ELF
FileHeader:
  Class: ELFCLASS[[BITS]]
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_line:
    - Length:                0x1234
      Version:               2
      PrologueLength:        0x1234
      MinInstLength:         1
      DefaultIsStmt:         1
      LineBase:              1
      LineRange:             14
      OpcodeBase:            13
      StandardOpcodeLengths: []
      Opcodes:
        - Opcode:    DW_LNS_extended_op
          ExtLen:    9
          SubOpcode: DW_LNE_set_address
          Data:      [[ADDR]]

## i) Test that yaml2obj is able to emit correct opcodes.

# RUN: yaml2obj --docnum=9 %s -o %t9.o
# RUN: llvm-readelf --hex-dump=.debug_line %t9.o | FileCheck %s --check-prefix=OPCODES

#      OPCODES: Hex dump of section '.debug_line':
# OPCODES-NEXT: 0x00000000 34120000 04003412 00000101 01010e0d 4.....4.........
##                         ^-------                            unit_length (4-byte)
##                                  ^---                       version (2-byte)
##                                      ^--------              header_length (4-byte)
##                                               ^-            minimum_instruction_length (1-byte)
##                                                 ^-          maximum_operations_per_instruction (1-byte)
##                                                    ^-       default_is_stmt (1-byte)
##                                                      ^-     line_base (1-byte)
##                                                        ^-   line_range (1-byte)
##                                                          ^- opcode_base (1-byte)
# OPCODES-NEXT: 0x00000010 00000102 b42403b4 2404b424 05b42406 .....$..$..$..$.
##                         ^-                                  null byte for terminating include_directories
##                           ^-                                null byte for terminating file_names
##                             ^-                              DW_LNS_copy (1-byte)
##                               ^-                            DW_LNS_advance_pc
##                                  ^---                       operands[0] (ULEB128) 0x1234
##                                      ^-                     DW_LNS_advance_line
##                                        ^----                operands[0] (SLEB128) 0x1234
##                                             ^-              DW_LNS_set_file
##                                               ^---          operands[0] (ULEB128) 0x1234
##                                                    ^-       DW_LNS_set_column
##                                                      ^---   operands[0] (ULEB128) 0x1234
##                                                          ^- DW_LNS_negate_stmt
# OPCODES-NEXT: 0x00000020 07080934 120a0b0c b4240009 01000902 ...4.....$......
##                         ^-                                  DW_LNS_set_basic_block
##                           ^-                                DW_LNS_const_add_pc
##                             ^-                              DW_LNS_fixed_advance_pc
##                               ^----                         operands[0] (uhalf, 2-byte)
##                                    ^-                       DW_LNS_set_prologue_end
##                                      ^-                     DW_LNS_set_epilogue_begin
##                                        ^-                   DW_LNS_set_isa
##                                           ^---              operands[0] (ULEB128) 0x1234
##                                               ^-            DW_LNS_extended_op
##                                                 ^-          extended op length (ULEB128) 0x09
##                                                    ^-       DW_LNE_end_sequence
##                                                      ^-     DW_LNS_extended_op
##                                                        ^-   extended op length (ULEB128) 0x09
##                                                          ^- DW_LNE_set_address
# OPCODES-NEXT: 0x00000030 34120000 00000000 00090361 62636400 4..........abcd.
##                         ^----------------                   operands[0] (8-byte)
##                                           ^-                DW_LNS_extended_op
##                                             ^-              extended op length (ULEB128) 0x09
##                                               ^-            DW_LNE_define_file
##                                                 ^---------- operands[0] "abcd\0"
# OPCODES-NEXT: 0x00000040 b424b424 b4240009 04b424            .$.$.$....$
##                         ^---                                operands[1] (ULEB128) 0x1234
##                             ^---                            operands[2] (ULEB128) 0x1234
##                                  ^---                       operands[3] (ULEB128) 0x1234
##                                      ^-                     DW_LNS_extended_op
##                                        ^-                   extended op length (ULEB128) 0x09
##                                           ^-                DW_LNE_set_discriminator
##                                             ^---            operands[0] (ULEB128) 0x1234

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_line:
    - Length:                0x1234
      Version:               4
      PrologueLength:        0x1234
      MinInstLength:         1
      MaxOpsPerInst:         1
      DefaultIsStmt:         1
      LineBase:              1
      LineRange:             14
      OpcodeBase:            13
      StandardOpcodeLengths: []
      Opcodes:
        - Opcode:    DW_LNS_copy
        - Opcode:    DW_LNS_advance_pc
          Data:      0x1234
        - Opcode:    DW_LNS_advance_line
          SData:     0x1234
        - Opcode:    DW_LNS_set_file
          Data:      0x1234
        - Opcode:    DW_LNS_set_column
          Data:      0x1234
        - Opcode:    DW_LNS_negate_stmt
        - Opcode:    DW_LNS_set_basic_block
        - Opcode:    DW_LNS_const_add_pc
        - Opcode:    DW_LNS_fixed_advance_pc
          Data:      0x1234
        - Opcode:    DW_LNS_set_prologue_end
        - Opcode:    DW_LNS_set_epilogue_begin
        - Opcode:    DW_LNS_set_isa
          Data:      0x1234
        - Opcode:    DW_LNS_extended_op
          ExtLen:    0x09
          SubOpcode: DW_LNE_end_sequence
        - Opcode:    DW_LNS_extended_op
          ExtLen:    0x09
          SubOpcode: DW_LNE_set_address
          Data:      0x1234
        - Opcode:    DW_LNS_extended_op
          ExtLen:    0x09
          SubOpcode: DW_LNE_define_file
          FileEntry:
            Name:    abcd
            DirIdx:  0x1234
            ModTime: 0x1234
            Length:  0x1234
        - Opcode:    DW_LNS_extended_op
          ExtLen:    0x09
          SubOpcode: DW_LNE_set_discriminator
          Data:      0x1234

## j) Test that yaml2obj is able to infer the length and header_length fields.

# RUN: yaml2obj --docnum=10 %s -o %t10.o
# RUN: llvm-readelf --hex-dump=.debug_line %t10.o | FileCheck %s --check-prefix=INFER-LENGTH

#      INFER-LENGTH: Hex dump of section '.debug_line':
# INFER-LENGTH-NEXT: 0x00000000 2e000000 04002500 00000101 01fb0e04 ......%.........
##                              ^-------                            unit_length (4-byte) 0x2e
##                                       ^---                       version (2-byte)
##                                           ^--------              header_length (4-byte) 0x25
##                                                    ^-            minimum_instruction_length (1-byte)
##                                                      ^-          maximum_operations_per_instruction (1-byte)
##                                                         ^-       default_is_stmt (1-byte)
##                                                           ^-     line_base (1-byte) -5
##                                                             ^-   line_range (1-byte)
##                                                               ^- opcode_base (1-byte)
# INFER-LENGTH-NEXT: 0x00000010 00010174 656d7031 0074656d 70320000 ...temp1.temp2..
##                              ^-----                              standard_opcode_lengths (3-byte)
##                                    ^-------------                include_directories[1] "temp1\0"
##                                                  ^------------   include_directories[2] "temp1\0"
##                                                               ^- include_directories null byte
# INFER-LENGTH-NEXT: 0x00000020 612e6300 01000062 2e630002 00000000 a.c....b.c......
##                              ^-------                            file_names[1] file name "a.c\0"
##                                       ^-                         file_names[1] directory index (ULEB128) 0x01
##                                         ^-                       file_names[1] file length (ULEB128) 0x00
##                                           ^-                     file_names[1] modification time 0x00
##                                             ^--------            file_names[2] file name "b.c\0"
##                                                      ^-          file_names[2] directory index (ULEB128) 0x02
##                                                         ^-       file_names[2] file length (ULEB128) 0x00
##                                                           ^-     file_names[2] modification time 0x00
##                                                             ^-   file_names null byte
##                                                               ^- DW_LNS_extended_op
# INFER-LENGTH-NEXT: 0x00000030 0101ffff ffff2500 00000000 00000400 ......%.........
##                              ^-                                  extended op length (ULEB128) 0x01
##                                ^-                                DW_LNE_end_sequence
##                                  ^--------------------------     unit_length (12-byte)
##                                                             ^--- version (2-byte)
# INFER-LENGTH-NEXT: 0x00000040 18000000 00000000 010101fb 0e040001 ................
##                              ^----------------                   header_length (8-byte)
##                                                ^-                minimum_instruction_length (1-byte)
##                                                  ^-              maximum_operations_per_instruction (1-byte)
##                                                    ^-            default_is_stmt (1-byte)
##                                                      ^-          line_base (1-byte) -5
##                                                         ^-       line_range (1-byte)
##                                                           ^-     opcode_base (1-byte)
##                                                             ^--- standard_opcode_lengths (3-byte)
# INFER-LENGTH-NEXT: 0x00000050 0174656d 70330000 632e6300 01000000 .temp3..c.c.....
##                              --
##                                ^------------                     include_directories[1] "temp3\0"
##                                             ^-                   include_directories null byte
##                                                ^-------          file_names[1] file name "a.c\0"
##                                                         ^-       file_names[1] directory index (ULEB128) 0x01
##                                                           ^-     file_names[1] file length (ULEB128) 0x00
##                                                             ^-   file_names[1] modification time 0x00
##                                                               ^- file_names null byte
# INFER-LENGTH-NEXT: 0x00000060 000101                              ...
##                              ^-                                  DW_LNS_extended_op
##                                ^-                                extended op length (ULEB128) 0x01
##                                  ^-                              DW_LNE_end_sequence

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_line:
    - Version:               4
      MinInstLength:         1
      MaxOpsPerInst:         1
      DefaultIsStmt:         1
      LineBase:              251
      LineRange:             14
      OpcodeBase:            4
      StandardOpcodeLengths: [ 0, 1, 1 ]
      IncludeDirs:
        - temp1
        - temp2
      Files:
        - Name:    a.c
          DirIdx:  1
          ModTime: 0
          Length:  0
        - Name:    b.c
          DirIdx:  2
          ModTime: 0
          Length:  0
      Opcodes:
        - Opcode:    DW_LNS_extended_op
          ExtLen:    1
          SubOpcode: DW_LNE_end_sequence
    - Format:                DWARF64
      Version:               4
      MinInstLength:         1
      MaxOpsPerInst:         1
      DefaultIsStmt:         1
      LineBase:              251
      LineRange:             14
      OpcodeBase:            4
      StandardOpcodeLengths: [ 0, 1, 1 ]
      IncludeDirs:
        - temp3
      Files:
        - Name:    c.c
          DirIdx:  1
          ModTime: 0
          Length:  0
      Opcodes:
        - Opcode:    DW_LNS_extended_op
          ExtLen:    1
          SubOpcode: DW_LNE_end_sequence

## k) Test that we can omit the include_directories, file_names and opcodes
## fields of the line table.

# RUN: yaml2obj --docnum=11 %s -o %t11.o
# RUN: llvm-readelf --hex-dump=.debug_line %t11.o | \
# RUN:   FileCheck %s --check-prefix=OMIT-FIELDS

#      OMIT-FIELDS: Hex dump of section '.debug_line':
# OMIT-FIELDS-NEXT: 0x00000000 11000000 04000b00 00000101 01fb0e04 ................
##                             ^-------                            unit_length (4-byte)
##                                      ^---                       version (2-byte)
##                                          ^--------              header_length (4-byte)
##                                                   ^-            minimum_instruction_length (1-byte)
##                                                     ^-          maximum_operations_per_instruction (1-byte)
##                                                        ^-       default_is_stmt (1-byte)
##                                                          ^-     line_base (1-byte) -5
##                                                            ^-   line_range (1-byte)
##                                                              ^- opcode_base (1-byte)
# OMIT-FIELDS-NEXT: 0x00000010 00010100 00                         .....
##                             ^-----                              standard_opcode_lengths (3-byte)
##                                   ^-                            include_directories null byte (1-byte)
##                                      ^-                         file_names null byte (1-byte)

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_line:
    - Version:               4
      MinInstLength:         1
      MaxOpsPerInst:         1
      DefaultIsStmt:         1
      LineBase:              251
      LineRange:             14
      OpcodeBase:            4
      StandardOpcodeLengths: [ 0, 1, 1 ]

## l) Test that we can specify or omit the ExtLen field of extended opcodes.

# RUN: yaml2obj --docnum=12 %s -o %t12.o
# RUN: llvm-readelf --hex-dump=.debug_line %t12.o | \
# RUN:   FileCheck %s --check-prefix=EXTLEN --strict-whitespace

#      EXTLEN: Hex dump of section '.debug_line':
# EXTLEN-NEXT: 0x00000000 20000000 04000800 00000101 01fb0e01
##                        ^---------------------------------- line number program header
# EXTLEN-NEXT: 0x00000010 0000000c 03616263 6400b424 b424b424
##                        ----
##                            ^-                              DW_LNS_extended_op
##                              ^-                            extended opcode length (ULEB128) 12
##                                 ^-                         DW_LNE_define_file
##                                   ^----------              "abcd\0"
##                                              ^---          directory index (ULEB128) 0x1234
##                                                   ^---     modification time (ULEB128) 0x1234
##                                                       ^--- file length (ULEB128) 0x1234
# EXTLEN-NEXT: 0x00000020 00b42401{{  }}
##                        ^-                                  DW_LNS_extended_op
##                          ^---                              extended opcode length (ULEB128) 0x1234
##                              ^-                            DW_LNE_end_sequence

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_line:
    - Version:               4
      MinInstLength:         1
      MaxOpsPerInst:         1
      DefaultIsStmt:         1
      LineBase:              251
      LineRange:             14
      OpcodeBase:            1
      StandardOpcodeLengths: []
      Opcodes:
        - Opcode:    DW_LNS_extended_op
          ## Omit the ExtLen field.
          SubOpcode: DW_LNE_define_file
          FileEntry:
            Name:    abcd
            DirIdx:  0x1234
            ModTime: 0x1234
            Length:  0x1234
        - Opcode:    DW_LNS_extended_op
          ## Specify the ExtLen field.
          ExtLen:    0x1234
          SubOpcode: DW_LNE_end_sequence

## m) Test how yaml2obj generates the opcode_base and the
## standard_opcode_lengths fields.

## Both the opcode_base and the standard_opcode_lengths fields are not
## specified (DWARFv2).

# RUN: yaml2obj --docnum=13 -DVERSION=2 -DMAXOPSPERINST='' %s -o %t13.o
# RUN: llvm-readelf --hex-dump=.debug_line %t13.o | \
# RUN:   FileCheck %s --check-prefix=OPCODEBASEV2

#      OPCODEBASEV2: Hex dump of section '.debug_line':
# OPCODEBASEV2-NEXT: 0x00000000 16000000 02001000 00000101 00010a00 ................
##                                                             ^-   opcode_base (10)
##                                                               ^- standard_opcode_lengths[DW_LNS_copy] = 0
# OPCODEBASEV2-NEXT: 0x00000010 01010101 00000001 0000              ..........
##                              ^-                                  standard_opcode_lengths[DW_LNS_advance_pc] = 1
##                                ^-                                standard_opcode_lengths[DW_LNS_advance_line] = 1
##                                  ^-                              standard_opcode_lengths[DW_LNS_set_file] = 1
##                                    ^-                            standard_opcode_lengths[DW_LNS_set_column] = 1
##                                       ^-                         standard_opcode_lengths[DW_LNS_negate_stmt] = 0
##                                         ^-                       standard_opcode_lengths[DW_LNS_set_basic_block] = 0
##                                           ^-                     standard_opcode_lengths[DW_LNS_const_add_pc] = 0
##                                             ^-                   standard_opcode_lengths[DW_LNS_fixed_advance_pc] = 1
##                                                ^---              terminators for include_directories and file_names

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
DWARF:
  debug_line:
    - Version:               [[VERSION=4]]
      MinInstLength:         1
      [[MAXOPSPERINST=MaxOpsPerInst: 0]]
      DefaultIsStmt:         1
      LineBase:              0
      LineRange:             1
      OpcodeBase:            [[OPCODEBASE=<none>]]
      StandardOpcodeLengths: [[STANDARDOPCODELENGTHS=<none>]]

## Both the opcode_base and the standard_opcode_lengths fields are not
## specified (DWARFv3).

# RUN: yaml2obj --docnum=13 -DVERSION=3 -DMAXOPSPERINST='' %s -o %t14.o
# RUN: llvm-readelf --hex-dump=.debug_line %t14.o | \
# RUN:   FileCheck %s --check-prefix=OPCODEBASEV3

#      OPCODEBASEV3: Hex dump of section '.debug_line':
# OPCODEBASEV3-NEXT: 0x00000000 19000000 03001300 00000101 00010d00 ................
##                                                             ^-   opcode_base (13)
##                                                               ^- standard_opcode_lengths[DW_LNS_copy] = 0
# OPCODEBASEV3-NEXT: 0x00000010 01010101 00000001 00000100 00       .............
##                              ^-                                  standard_opcode_lengths[DW_LNS_advance_pc] = 1
##                                ^-                                standard_opcode_lengths[DW_LNS_advance_line] = 1
##                                  ^-                              standard_opcode_lengths[DW_LNS_set_file] = 1
##                                    ^-                            standard_opcode_lengths[DW_LNS_set_column] = 1
##                                       ^-                         standard_opcode_lengths[DW_LNS_negate_stmt] = 0
##                                         ^-                       standard_opcode_lengths[DW_LNS_set_basic_block] = 0
##                                           ^-                     standard_opcode_lengths[DW_LNS_const_add_pc] = 0
##                                             ^-                   standard_opcode_lengths[DW_LNS_fixed_advance_pc] = 1
##                                                ^-                standard_opcode_lengths[DW_LNS_set_prologue_end] = 0
##                                                  ^-              standard_opcode_lengths[DW_LNS_set_epilogue_begin] = 0
##                                                    ^-            standard_opcode_lengths[DW_LNS_set_isa] = 1
##                                                      ^----       terminators for include_directories and file_names

## Both the opcode_base and the standard_opcode_lengths fields are not
## specified (DWARFv4).

# RUN: yaml2obj --docnum=13 %s -o %t15.o
# RUN: llvm-readelf --hex-dump=.debug_line %t15.o | \
# RUN:   FileCheck %s --check-prefix=OPCODEBASEV4

#      OPCODEBASEV4: Hex dump of section '.debug_line':
# OPCODEBASEV4-NEXT: 0x00000000 1a000000 04001400 00000100 0100010d ................
##                                                              ^- opcode_base (13)
# OPCODEBASEV4-NEXT: 0x00000010 00010101 01000000 01000001 0000     ..............
##                              ^-                                  standard_opcode_lengths[DW_LNS_copy] = 0
##                                ^-                                standard_opcode_lengths[DW_LNS_advance_pc] = 1
##                                  ^-                              standard_opcode_lengths[DW_LNS_advance_line] = 1
##                                    ^-                            standard_opcode_lengths[DW_LNS_set_file] = 1
##                                       ^-                         standard_opcode_lengths[DW_LNS_set_column] = 1
##                                         ^-                       standard_opcode_lengths[DW_LNS_negate_stmt] = 0
##                                           ^-                     standard_opcode_lengths[DW_LNS_set_basic_block] = 0
##                                             ^-                   standard_opcode_lengths[DW_LNS_const_add_pc] = 0
##                                                ^-                standard_opcode_lengths[DW_LNS_fixed_advance_pc] = 1
##                                                  ^-              standard_opcode_lengths[DW_LNS_set_prologue_end] = 0
##                                                    ^-            standard_opcode_lengths[DW_LNS_set_epilogue_begin] = 0
##                                                      ^-          standard_opcode_lengths[DW_LNS_set_isa] = 1
##                                                         ^---     terminators for include_directories and file_names

## Specify the opcode_base field (opcode_base == 0).

# RUN: yaml2obj --docnum=13 -DOPCODEBASE=0 %s -o %t16.o
# RUN: llvm-readelf --hex-dump=.debug_line %t16.o | \
# RUN:   FileCheck %s --check-prefix=ZERO-OPCODEBASE

#      ZERO-OPCODEBASE: Hex dump of section '.debug_line':
# ZERO-OPCODEBASE-NEXT: 0x00000000 0e000000 04000800 00000100 01000100 ................
##                                                                  ^- opcode_base (0)
# ZERO-OPCODEBASE-NEXT: 0x00000010 0000                                ..
##                                 ^---                                terminators for include_directories and file_names

## Specify the opcode_base field (opcode_base != 0, opcode_base - 1 < 12).
## The standard_opcode_lengths array will be truncated.

# RUN: yaml2obj --docnum=13 -DOPCODEBASE=4 %s -o %t17.o
# RUN: llvm-readelf --hex-dump=.debug_line %t17.o | \
# RUN:   FileCheck %s --check-prefix=OPCODEBASE

#      OPCODEBASE: Hex dump of section '.debug_line':
# OPCODEBASE-NEXT: 0x00000000 11000000 04000b00 00000100 01000104 ................
##                                                             ^- opcode_base (4)
# OPCODEBASE-NEXT: 0x00000010 00010100 00                         .....
##                            ^-----                              standard_opcode_lengths (3-byte)
##                                  ^----                         terminators for include_directories and file_names

## Specify the opcode_base field (opcode_base != 0, opcode_base - 1 > 12).
## The standard_opcode_lengths array will be extended.

# RUN: yaml2obj --docnum=13 -DOPCODEBASE=20 %s -o %t18.o
# RUN: llvm-readelf --hex-dump=.debug_line %t18.o | \
# RUN:   FileCheck %s --check-prefix=OPCODEBASE1

#      OPCODEBASE1: Hex dump of section '.debug_line':
# OPCODEBASE1-NEXT: 0x00000000 21000000 04001b00 00000100 01000114 !...............
##                                                              ^- opcode_base (20)
# OPCODEBASE1-NEXT: 0x00000010 00010101 01000000 01000001 00000000 ................
##                             ^-------------------------          standard_opcode_lengths defined in DWARFv5 (12-byte)
##                                                        ^------- extended standard_opcode_lengths (7-byte)
# OPCODEBASE1-NEXT: 0x00000020 00000000 00                         .....
##                             ------
##                                   ^----                         terminators for include_directories and file_names

## Specify the standard_opcode_lengths field.

# RUN: yaml2obj --docnum=13 -DSTANDARDOPCODELENGTHS=[0,1,0] %s -o %t19.o
# RUN: llvm-readelf --hex-dump=.debug_line %t19.o | \
# RUN:   FileCheck %s --check-prefix=OPCODELENGTHS

#      OPCODELENGTHS: Hex dump of section '.debug_line':
# OPCODELENGTHS-NEXT: 0x00000000 11000000 04000b00 00000100 01000104 ................
##                                                                ^- opcode_base (4)
# OPCODELENGTHS-NEXT: 0x00000010 00010000 00                         .....
##                               ^-----                              standard_opcode_lengths (3-byte)
##                                     ^----                         terminators for include_directories and file_names

## Specify both the opcode_base and the standard_opcode_lengths fields.

# RUN: yaml2obj --docnum=13 -DOPCODEBASE=2 -DSTANDARDOPCODELENGTHS=[0,1,0] %s -o %t20.o
# RUN: llvm-readelf --hex-dump=.debug_line %t20.o | \
# RUN:   FileCheck %s --check-prefix=OPCODEBASE-LENGTHS

#      OPCODEBASE-LENGTHS: Hex dump of section '.debug_line':
# OPCODEBASE-LENGTHS-NEXT: 0x00000000 11000000 04000b00 00000100 01000102 ................
##                                                                     ^- opcode_base (2)
# OPCODEBASE-LENGTHS-NEXT: 0x00000010 00010000 00                         .....
##                                    ^-----                              standard_opcode_lengths (3-byte)
##                                          ^----                         terminators for include_directories and file_names