; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
; RUN: opt < %s -simplifycfg -switch-to-lookup=true -keep-loops=false -S -mtriple=x86_64-unknown-linux-gnu | FileCheck %s
; RUN: opt < %s -passes='simplify-cfg<no-keep-loops;switch-to-lookup>' -S -mtriple=x86_64-unknown-linux-gnu | FileCheck %s
target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
target triple = "x86_64-unknown-linux-gnu"

; The table for @f
; CHECK: @switch.table.f = private unnamed_addr constant [7 x i32] [i32 55, i32 123, i32 0, i32 -1, i32 27, i32 62, i32 1], align 4

; The char table for char
; CHECK: @switch.table.char = private unnamed_addr constant [9 x i8] c"7{\00\FF\1B>\01!T", align 1

; The float table for @h
; CHECK: @switch.table.h = private unnamed_addr constant [4 x float] [float 0x40091EB860000000, float 0x3FF3BE76C0000000, float 0x4012449BA0000000, float 0x4001AE1480000000], align 4

; The table for @foostring
; CHECK: @switch.table.foostring = private unnamed_addr constant [4 x i8*] [i8* getelementptr inbounds ([4 x i8], [4 x i8]* @.str, i64 0, i64 0), i8* getelementptr inbounds ([4 x i8], [4 x i8]* @.str1, i64 0, i64 0), i8* getelementptr inbounds ([4 x i8], [4 x i8]* @.str2, i64 0, i64 0), i8* getelementptr inbounds ([4 x i8], [4 x i8]* @.str3, i64 0, i64 0)], align 8

; The table for @earlyreturncrash
; CHECK: @switch.table.earlyreturncrash = private unnamed_addr constant [4 x i32] [i32 42, i32 9, i32 88, i32 5], align 4

; The table for @large
; CHECK: @switch.table.large = private unnamed_addr constant [199 x i32] [i32 1, i32 4, i32 9,

; The table for @cprop
; CHECK: @switch.table.cprop = private unnamed_addr constant [7 x i32] [i32 5, i32 42, i32 126, i32 -452, i32 128, i32 6, i32 7], align 4

; The table for @unreachable_case
; CHECK: @switch.table.unreachable_case = private unnamed_addr constant [9 x i32] [i32 0, i32 0, i32 0, i32 2, i32 -1, i32 1, i32 1, i32 1, i32 1], align 4

; A simple int-to-int selection switch.
; It is dense enough to be replaced by table lookup.
; The result is directly by a ret from an otherwise empty bb,
; so we return early, directly from the lookup bb.

define i32 @f(i32 %c) {
; CHECK-LABEL: @f(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[SWITCH_TABLEIDX:%.*]] = sub i32 [[C:%.*]], 42
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[SWITCH_TABLEIDX]], 7
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[RETURN:%.*]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_GEP:%.*]] = getelementptr inbounds [7 x i32], [7 x i32]* @switch.table.f, i32 0, i32 [[SWITCH_TABLEIDX]]
; CHECK-NEXT:    [[SWITCH_LOAD:%.*]] = load i32, i32* [[SWITCH_GEP]], align 4
; CHECK-NEXT:    ret i32 [[SWITCH_LOAD]]
; CHECK:       return:
; CHECK-NEXT:    ret i32 15
;
entry:
  switch i32 %c, label %sw.default [
  i32 42, label %return
  i32 43, label %sw.bb1
  i32 44, label %sw.bb2
  i32 45, label %sw.bb3
  i32 46, label %sw.bb4
  i32 47, label %sw.bb5
  i32 48, label %sw.bb6
  ]

sw.bb1: br label %return
sw.bb2: br label %return
sw.bb3: br label %return
sw.bb4: br label %return
sw.bb5: br label %return
sw.bb6: br label %return
sw.default: br label %return
return:
  %retval.0 = phi i32 [ 15, %sw.default ], [ 1, %sw.bb6 ], [ 62, %sw.bb5 ], [ 27, %sw.bb4 ], [ -1, %sw.bb3 ], [ 0, %sw.bb2 ], [ 123, %sw.bb1 ], [ 55, %entry ]
  ret i32 %retval.0

}

; Same thing, but with i8's

define i8 @char(i32 %c) {
; CHECK-LABEL: @char(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[SWITCH_TABLEIDX:%.*]] = sub i32 [[C:%.*]], 42
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[SWITCH_TABLEIDX]], 9
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[RETURN:%.*]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_GEP:%.*]] = getelementptr inbounds [9 x i8], [9 x i8]* @switch.table.char, i32 0, i32 [[SWITCH_TABLEIDX]]
; CHECK-NEXT:    [[SWITCH_LOAD:%.*]] = load i8, i8* [[SWITCH_GEP]], align 1
; CHECK-NEXT:    ret i8 [[SWITCH_LOAD]]
; CHECK:       return:
; CHECK-NEXT:    ret i8 15
;
entry:
  switch i32 %c, label %sw.default [
  i32 42, label %return
  i32 43, label %sw.bb1
  i32 44, label %sw.bb2
  i32 45, label %sw.bb3
  i32 46, label %sw.bb4
  i32 47, label %sw.bb5
  i32 48, label %sw.bb6
  i32 49, label %sw.bb7
  i32 50, label %sw.bb8
  ]

sw.bb1: br label %return
sw.bb2: br label %return
sw.bb3: br label %return
sw.bb4: br label %return
sw.bb5: br label %return
sw.bb6: br label %return
sw.bb7: br label %return
sw.bb8: br label %return
sw.default: br label %return
return:
  %retval.0 = phi i8 [ 15, %sw.default ], [ 84, %sw.bb8 ], [ 33, %sw.bb7 ], [ 1, %sw.bb6 ], [ 62, %sw.bb5 ], [ 27, %sw.bb4 ], [ -1, %sw.bb3 ], [ 0, %sw.bb2 ], [ 123, %sw.bb1 ], [ 55, %entry ]
  ret i8 %retval.0

}

; A switch used to initialize two variables, an i8 and a float.

declare void @dummy(i8 signext, float)
define void @h(i32 %x) {
; CHECK-LABEL: @h(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[X:%.*]], 4
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[SW_EPILOG:%.*]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_SHIFTAMT:%.*]] = mul i32 [[X]], 8
; CHECK-NEXT:    [[SWITCH_DOWNSHIFT:%.*]] = lshr i32 89655594, [[SWITCH_SHIFTAMT]]
; CHECK-NEXT:    [[SWITCH_MASKED:%.*]] = trunc i32 [[SWITCH_DOWNSHIFT]] to i8
; CHECK-NEXT:    [[SWITCH_GEP:%.*]] = getelementptr inbounds [4 x float], [4 x float]* @switch.table.h, i32 0, i32 [[X]]
; CHECK-NEXT:    [[SWITCH_LOAD:%.*]] = load float, float* [[SWITCH_GEP]], align 4
; CHECK-NEXT:    br label [[SW_EPILOG]]
; CHECK:       sw.epilog:
; CHECK-NEXT:    [[A_0:%.*]] = phi i8 [ [[SWITCH_MASKED]], [[SWITCH_LOOKUP]] ], [ 7, [[ENTRY:%.*]] ]
; CHECK-NEXT:    [[B_0:%.*]] = phi float [ [[SWITCH_LOAD]], [[SWITCH_LOOKUP]] ], [ 0x4023FAE140000000, [[ENTRY]] ]
; CHECK-NEXT:    call void @dummy(i8 signext [[A_0]], float [[B_0]])
; CHECK-NEXT:    ret void
;
entry:
  switch i32 %x, label %sw.default [
  i32 0, label %sw.epilog
  i32 1, label %sw.bb1
  i32 2, label %sw.bb2
  i32 3, label %sw.bb3
  ]

sw.bb1: br label %sw.epilog
sw.bb2: br label %sw.epilog
sw.bb3: br label %sw.epilog
sw.default: br label %sw.epilog

sw.epilog:
  %a.0 = phi i8 [ 7, %sw.default ], [ 5, %sw.bb3 ], [ 88, %sw.bb2 ], [ 9, %sw.bb1 ], [ 42, %entry ]
  %b.0 = phi float [ 0x4023FAE140000000, %sw.default ], [ 0x4001AE1480000000, %sw.bb3 ], [ 0x4012449BA0000000, %sw.bb2 ], [ 0x3FF3BE76C0000000, %sw.bb1 ], [ 0x40091EB860000000, %entry ]
  call void @dummy(i8 signext %a.0, float %b.0)
  ret void

}


; Switch used to return a string.

@.str = private unnamed_addr constant [4 x i8] c"foo\00", align 1
@.str1 = private unnamed_addr constant [4 x i8] c"bar\00", align 1
@.str2 = private unnamed_addr constant [4 x i8] c"baz\00", align 1
@.str3 = private unnamed_addr constant [4 x i8] c"qux\00", align 1
@.str4 = private unnamed_addr constant [6 x i8] c"error\00", align 1

define i8* @foostring(i32 %x)  {
; CHECK-LABEL: @foostring(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[X:%.*]], 4
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[RETURN:%.*]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_GEP:%.*]] = getelementptr inbounds [4 x i8*], [4 x i8*]* @switch.table.foostring, i32 0, i32 [[X]]
; CHECK-NEXT:    [[SWITCH_LOAD:%.*]] = load i8*, i8** [[SWITCH_GEP]], align 8
; CHECK-NEXT:    ret i8* [[SWITCH_LOAD]]
; CHECK:       return:
; CHECK-NEXT:    ret i8* getelementptr inbounds ([6 x i8], [6 x i8]* @.str4, i64 0, i64 0)
;
entry:
  switch i32 %x, label %sw.default [
  i32 0, label %return
  i32 1, label %sw.bb1
  i32 2, label %sw.bb2
  i32 3, label %sw.bb3
  ]

sw.bb1: br label %return
sw.bb2: br label %return
sw.bb3: br label %return
sw.default: br label %return

return:
  %retval.0 = phi i8* [ getelementptr inbounds ([6 x i8], [6 x i8]* @.str4, i64 0, i64 0), %sw.default ],
  [ getelementptr inbounds ([4 x i8], [4 x i8]* @.str3, i64 0, i64 0), %sw.bb3 ],
  [ getelementptr inbounds ([4 x i8], [4 x i8]* @.str2, i64 0, i64 0), %sw.bb2 ],
  [ getelementptr inbounds ([4 x i8], [4 x i8]* @.str1, i64 0, i64 0), %sw.bb1 ],
  [ getelementptr inbounds ([4 x i8], [4 x i8]* @.str, i64 0, i64 0), %entry ]
  ret i8* %retval.0

}

; Switch used to initialize two values. The first value is returned, the second
; value is not used. This used to make the transformation generate illegal code.

define i32 @earlyreturncrash(i32 %x)  {
; CHECK-LABEL: @earlyreturncrash(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[X:%.*]], 4
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[SW_EPILOG:%.*]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_GEP:%.*]] = getelementptr inbounds [4 x i32], [4 x i32]* @switch.table.earlyreturncrash, i32 0, i32 [[X]]
; CHECK-NEXT:    [[SWITCH_LOAD:%.*]] = load i32, i32* [[SWITCH_GEP]], align 4
; CHECK-NEXT:    ret i32 [[SWITCH_LOAD]]
; CHECK:       sw.epilog:
; CHECK-NEXT:    ret i32 7
;
entry:
  switch i32 %x, label %sw.default [
  i32 0, label %sw.epilog
  i32 1, label %sw.bb1
  i32 2, label %sw.bb2
  i32 3, label %sw.bb3
  ]

sw.bb1: br label %sw.epilog
sw.bb2: br label %sw.epilog
sw.bb3: br label %sw.epilog
sw.default: br label %sw.epilog

sw.epilog:
  %a.0 = phi i32 [ 7, %sw.default ], [ 5, %sw.bb3 ], [ 88, %sw.bb2 ], [ 9, %sw.bb1 ], [ 42, %entry ]
  %b.0 = phi i32 [ 10, %sw.default ], [ 5, %sw.bb3 ], [ 1, %sw.bb2 ], [ 4, %sw.bb1 ], [ 3, %entry ]
  ret i32 %a.0

}


; Example 7 from http://blog.regehr.org/archives/320
; It is not dense enough for a regular table, but the results
; can be packed into a bitmap.

define i32 @crud(i8 zeroext %c)  {
; CHECK-LABEL: @crud(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[CMP:%.*]] = icmp ult i8 [[C:%.*]], 33
; CHECK-NEXT:    br i1 [[CMP]], label [[LOR_END:%.*]], label [[SWITCH_EARLY_TEST:%.*]]
; CHECK:       switch.early.test:
; CHECK-NEXT:    [[SWITCH_TABLEIDX:%.*]] = sub i8 [[C]], 34
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i8 [[SWITCH_TABLEIDX]], 59
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[LOR_END]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_CAST:%.*]] = zext i8 [[SWITCH_TABLEIDX]] to i59
; CHECK-NEXT:    [[SWITCH_SHIFTAMT:%.*]] = mul i59 [[SWITCH_CAST]], 1
; CHECK-NEXT:    [[SWITCH_DOWNSHIFT:%.*]] = lshr i59 -288230375765830623, [[SWITCH_SHIFTAMT]]
; CHECK-NEXT:    [[SWITCH_MASKED:%.*]] = trunc i59 [[SWITCH_DOWNSHIFT]] to i1
; CHECK-NEXT:    br label [[LOR_END]]
; CHECK:       lor.end:
; CHECK-NEXT:    [[TMP1:%.*]] = phi i1 [ true, [[ENTRY:%.*]] ], [ [[SWITCH_MASKED]], [[SWITCH_LOOKUP]] ], [ false, [[SWITCH_EARLY_TEST]] ]
; CHECK-NEXT:    [[LOR_EXT:%.*]] = zext i1 [[TMP1]] to i32
; CHECK-NEXT:    ret i32 [[LOR_EXT]]
;
entry:
  %cmp = icmp ult i8 %c, 33
  br i1 %cmp, label %lor.end, label %switch.early.test

switch.early.test:
  switch i8 %c, label %lor.rhs [
  i8 92, label %lor.end
  i8 62, label %lor.end
  i8 60, label %lor.end
  i8 59, label %lor.end
  i8 58, label %lor.end
  i8 46, label %lor.end
  i8 44, label %lor.end
  i8 34, label %lor.end
  i8 39, label %switch.edge
  ]

switch.edge: br label %lor.end
lor.rhs: br label %lor.end

lor.end:
  %0 = phi i1 [ true, %switch.early.test ],
  [ false, %lor.rhs ],
  [ true, %entry ],
  [ true, %switch.early.test ],
  [ true, %switch.early.test ],
  [ true, %switch.early.test ],
  [ true, %switch.early.test ],
  [ true, %switch.early.test ],
  [ true, %switch.early.test ],
  [ true, %switch.early.test ],
  [ true, %switch.edge ]
  %lor.ext = zext i1 %0 to i32
  ret i32 %lor.ext

}

; PR13946
define i32 @overflow(i32 %type) {
; CHECK-LABEL: @overflow(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    switch i32 [[TYPE:%.*]], label [[IF_END:%.*]] [
; CHECK-NEXT:    i32 3, label [[SW_BB3:%.*]]
; CHECK-NEXT:    i32 -2147483645, label [[SW_BB3]]
; CHECK-NEXT:    i32 1, label [[SW_BB1:%.*]]
; CHECK-NEXT:    i32 2, label [[SW_BB2:%.*]]
; CHECK-NEXT:    ]
; CHECK:       sw.bb1:
; CHECK-NEXT:    br label [[IF_END]]
; CHECK:       sw.bb2:
; CHECK-NEXT:    br label [[IF_END]]
; CHECK:       sw.bb3:
; CHECK-NEXT:    br label [[IF_END]]
; CHECK:       if.end:
; CHECK-NEXT:    [[DIRENT_TYPE_0:%.*]] = phi i32 [ 6, [[SW_BB3]] ], [ 5, [[SW_BB2]] ], [ 0, [[SW_BB1]] ], [ 3, [[ENTRY:%.*]] ]
; CHECK-NEXT:    ret i32 [[DIRENT_TYPE_0]]
;
entry:
  switch i32 %type, label %sw.default [
  i32 -2147483648, label %sw.bb
  i32 0, label %sw.bb
  i32 1, label %sw.bb1
  i32 2, label %sw.bb2
  i32 -2147483645, label %sw.bb3
  i32 3, label %sw.bb3
  ]

sw.bb: br label %if.end
sw.bb1: br label %if.end
sw.bb2: br label %if.end
sw.bb3: br label %if.end
sw.default: br label %if.end
if.else: br label %if.end

if.end:
  %dirent_type.0 = phi i32 [ 3, %sw.default ], [ 6, %sw.bb3 ], [ 5, %sw.bb2 ], [ 0, %sw.bb1 ], [ 3, %sw.bb ], [ 0, %if.else ]
  ret i32 %dirent_type.0
}

; PR13985
define i1 @undef(i32 %tmp) {
; CHECK-LABEL: @undef(
; CHECK-NEXT:  bb:
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[TMP:%.*]], 9
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[BB3:%.*]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_CAST:%.*]] = trunc i32 [[TMP]] to i9
; CHECK-NEXT:    [[SWITCH_SHIFTAMT:%.*]] = mul i9 [[SWITCH_CAST]], 1
; CHECK-NEXT:    [[SWITCH_DOWNSHIFT:%.*]] = lshr i9 3, [[SWITCH_SHIFTAMT]]
; CHECK-NEXT:    [[SWITCH_MASKED:%.*]] = trunc i9 [[SWITCH_DOWNSHIFT]] to i1
; CHECK-NEXT:    ret i1 [[SWITCH_MASKED]]
; CHECK:       bb3:
; CHECK-NEXT:    ret i1 undef
;
bb:
  switch i32 %tmp, label %bb3 [
  i32 0, label %bb1
  i32 1, label %bb1
  i32 7, label %bb2
  i32 8, label %bb2
  ]

bb1: br label %bb3
bb2: br label %bb3

bb3:
  %tmp4 = phi i1 [ undef, %bb ], [ false, %bb2 ], [ true, %bb1 ]
  ret i1 %tmp4
}

; Also handle large switches that would be rejected by
; isValueEqualityComparison()

define i32 @large(i32 %x) {
; CHECK-LABEL: @large(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[CMP:%.*]] = icmp slt i32 [[X:%.*]], 0
; CHECK-NEXT:    [[MUL:%.*]] = mul i32 [[X]], -10
; CHECK-NEXT:    [[SPEC_SELECT:%.*]] = select i1 [[CMP]], i32 [[MUL]], i32 [[X]]
; CHECK-NEXT:    [[SWITCH_TABLEIDX:%.*]] = sub i32 [[SPEC_SELECT]], 1
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[SWITCH_TABLEIDX]], 199
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[RETURN:%.*]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_GEP:%.*]] = getelementptr inbounds [199 x i32], [199 x i32]* @switch.table.large, i32 0, i32 [[SWITCH_TABLEIDX]]
; CHECK-NEXT:    [[SWITCH_LOAD:%.*]] = load i32, i32* [[SWITCH_GEP]], align 4
; CHECK-NEXT:    ret i32 [[SWITCH_LOAD]]
; CHECK:       return:
; CHECK-NEXT:    ret i32 0
;
entry:
  %cmp = icmp slt i32 %x, 0
  br i1 %cmp, label %if.then, label %if.end

if.then:
  %mul = mul i32 %x, -10
  br label %if.end

if.end:
  %x.addr.0 = phi i32 [ %mul, %if.then ], [ %x, %entry ]
  switch i32 %x.addr.0, label %return [
  i32 199, label %sw.bb203
  i32 1, label %sw.bb1
  i32 2, label %sw.bb2
  i32 3, label %sw.bb3
  i32 4, label %sw.bb4
  i32 5, label %sw.bb5
  i32 6, label %sw.bb6
  i32 7, label %sw.bb7
  i32 8, label %sw.bb8
  i32 9, label %sw.bb9
  i32 10, label %sw.bb10
  i32 11, label %sw.bb11
  i32 12, label %sw.bb12
  i32 13, label %sw.bb13
  i32 14, label %sw.bb14
  i32 15, label %sw.bb15
  i32 16, label %sw.bb16
  i32 17, label %sw.bb17
  i32 18, label %sw.bb18
  i32 19, label %sw.bb19
  i32 20, label %sw.bb20
  i32 21, label %sw.bb21
  i32 22, label %sw.bb22
  i32 23, label %sw.bb23
  i32 24, label %sw.bb24
  i32 25, label %sw.bb25
  i32 26, label %sw.bb26
  i32 27, label %sw.bb27
  i32 28, label %sw.bb28
  i32 29, label %sw.bb29
  i32 30, label %sw.bb30
  i32 31, label %sw.bb31
  i32 32, label %sw.bb32
  i32 33, label %sw.bb33
  i32 34, label %sw.bb34
  i32 35, label %sw.bb35
  i32 36, label %sw.bb37
  i32 37, label %sw.bb38
  i32 38, label %sw.bb39
  i32 39, label %sw.bb40
  i32 40, label %sw.bb41
  i32 41, label %sw.bb42
  i32 42, label %sw.bb43
  i32 43, label %sw.bb44
  i32 44, label %sw.bb45
  i32 45, label %sw.bb47
  i32 46, label %sw.bb48
  i32 47, label %sw.bb49
  i32 48, label %sw.bb50
  i32 49, label %sw.bb51
  i32 50, label %sw.bb52
  i32 51, label %sw.bb53
  i32 52, label %sw.bb54
  i32 53, label %sw.bb55
  i32 54, label %sw.bb56
  i32 55, label %sw.bb58
  i32 56, label %sw.bb59
  i32 57, label %sw.bb60
  i32 58, label %sw.bb61
  i32 59, label %sw.bb62
  i32 60, label %sw.bb63
  i32 61, label %sw.bb64
  i32 62, label %sw.bb65
  i32 63, label %sw.bb66
  i32 64, label %sw.bb67
  i32 65, label %sw.bb68
  i32 66, label %sw.bb69
  i32 67, label %sw.bb70
  i32 68, label %sw.bb71
  i32 69, label %sw.bb72
  i32 70, label %sw.bb73
  i32 71, label %sw.bb74
  i32 72, label %sw.bb76
  i32 73, label %sw.bb77
  i32 74, label %sw.bb78
  i32 75, label %sw.bb79
  i32 76, label %sw.bb80
  i32 77, label %sw.bb81
  i32 78, label %sw.bb82
  i32 79, label %sw.bb83
  i32 80, label %sw.bb84
  i32 81, label %sw.bb85
  i32 82, label %sw.bb86
  i32 83, label %sw.bb87
  i32 84, label %sw.bb88
  i32 85, label %sw.bb89
  i32 86, label %sw.bb90
  i32 87, label %sw.bb91
  i32 88, label %sw.bb92
  i32 89, label %sw.bb93
  i32 90, label %sw.bb94
  i32 91, label %sw.bb95
  i32 92, label %sw.bb96
  i32 93, label %sw.bb97
  i32 94, label %sw.bb98
  i32 95, label %sw.bb99
  i32 96, label %sw.bb100
  i32 97, label %sw.bb101
  i32 98, label %sw.bb102
  i32 99, label %sw.bb103
  i32 100, label %sw.bb104
  i32 101, label %sw.bb105
  i32 102, label %sw.bb106
  i32 103, label %sw.bb107
  i32 104, label %sw.bb108
  i32 105, label %sw.bb109
  i32 106, label %sw.bb110
  i32 107, label %sw.bb111
  i32 108, label %sw.bb112
  i32 109, label %sw.bb113
  i32 110, label %sw.bb114
  i32 111, label %sw.bb115
  i32 112, label %sw.bb116
  i32 113, label %sw.bb117
  i32 114, label %sw.bb118
  i32 115, label %sw.bb119
  i32 116, label %sw.bb120
  i32 117, label %sw.bb121
  i32 118, label %sw.bb122
  i32 119, label %sw.bb123
  i32 120, label %sw.bb124
  i32 121, label %sw.bb125
  i32 122, label %sw.bb126
  i32 123, label %sw.bb127
  i32 124, label %sw.bb128
  i32 125, label %sw.bb129
  i32 126, label %sw.bb130
  i32 127, label %sw.bb131
  i32 128, label %sw.bb132
  i32 129, label %sw.bb133
  i32 130, label %sw.bb134
  i32 131, label %sw.bb135
  i32 132, label %sw.bb136
  i32 133, label %sw.bb137
  i32 134, label %sw.bb138
  i32 135, label %sw.bb139
  i32 136, label %sw.bb140
  i32 137, label %sw.bb141
  i32 138, label %sw.bb142
  i32 139, label %sw.bb143
  i32 140, label %sw.bb144
  i32 141, label %sw.bb145
  i32 142, label %sw.bb146
  i32 143, label %sw.bb147
  i32 144, label %sw.bb148
  i32 145, label %sw.bb149
  i32 146, label %sw.bb150
  i32 147, label %sw.bb151
  i32 148, label %sw.bb152
  i32 149, label %sw.bb153
  i32 150, label %sw.bb154
  i32 151, label %sw.bb155
  i32 152, label %sw.bb156
  i32 153, label %sw.bb157
  i32 154, label %sw.bb158
  i32 155, label %sw.bb159
  i32 156, label %sw.bb160
  i32 157, label %sw.bb161
  i32 158, label %sw.bb162
  i32 159, label %sw.bb163
  i32 160, label %sw.bb164
  i32 161, label %sw.bb165
  i32 162, label %sw.bb166
  i32 163, label %sw.bb167
  i32 164, label %sw.bb168
  i32 165, label %sw.bb169
  i32 166, label %sw.bb170
  i32 167, label %sw.bb171
  i32 168, label %sw.bb172
  i32 169, label %sw.bb173
  i32 170, label %sw.bb174
  i32 171, label %sw.bb175
  i32 172, label %sw.bb176
  i32 173, label %sw.bb177
  i32 174, label %sw.bb178
  i32 175, label %sw.bb179
  i32 176, label %sw.bb180
  i32 177, label %sw.bb181
  i32 178, label %sw.bb182
  i32 179, label %sw.bb183
  i32 180, label %sw.bb184
  i32 181, label %sw.bb185
  i32 182, label %sw.bb186
  i32 183, label %sw.bb187
  i32 184, label %sw.bb188
  i32 185, label %sw.bb189
  i32 186, label %sw.bb190
  i32 187, label %sw.bb191
  i32 188, label %sw.bb192
  i32 189, label %sw.bb193
  i32 190, label %sw.bb194
  i32 191, label %sw.bb195
  i32 192, label %sw.bb196
  i32 193, label %sw.bb197
  i32 194, label %sw.bb198
  i32 195, label %sw.bb199
  i32 196, label %sw.bb200
  i32 197, label %sw.bb201
  i32 198, label %sw.bb202
  ]

sw.bb1: br label %return
sw.bb2: br label %return
sw.bb3: br label %return
sw.bb4: br label %return
sw.bb5: br label %return
sw.bb6: br label %return
sw.bb7: br label %return
sw.bb8: br label %return
sw.bb9: br label %return
sw.bb10: br label %return
sw.bb11: br label %return
sw.bb12: br label %return
sw.bb13: br label %return
sw.bb14: br label %return
sw.bb15: br label %return
sw.bb16: br label %return
sw.bb17: br label %return
sw.bb18: br label %return
sw.bb19: br label %return
sw.bb20: br label %return
sw.bb21: br label %return
sw.bb22: br label %return
sw.bb23: br label %return
sw.bb24: br label %return
sw.bb25: br label %return
sw.bb26: br label %return
sw.bb27: br label %return
sw.bb28: br label %return
sw.bb29: br label %return
sw.bb30: br label %return
sw.bb31: br label %return
sw.bb32: br label %return
sw.bb33: br label %return
sw.bb34: br label %return
sw.bb35: br label %return
sw.bb37: br label %return
sw.bb38: br label %return
sw.bb39: br label %return
sw.bb40: br label %return
sw.bb41: br label %return
sw.bb42: br label %return
sw.bb43: br label %return
sw.bb44: br label %return
sw.bb45: br label %return
sw.bb47: br label %return
sw.bb48: br label %return
sw.bb49: br label %return
sw.bb50: br label %return
sw.bb51: br label %return
sw.bb52: br label %return
sw.bb53: br label %return
sw.bb54: br label %return
sw.bb55: br label %return
sw.bb56: br label %return
sw.bb58: br label %return
sw.bb59: br label %return
sw.bb60: br label %return
sw.bb61: br label %return
sw.bb62: br label %return
sw.bb63: br label %return
sw.bb64: br label %return
sw.bb65: br label %return
sw.bb66: br label %return
sw.bb67: br label %return
sw.bb68: br label %return
sw.bb69: br label %return
sw.bb70: br label %return
sw.bb71: br label %return
sw.bb72: br label %return
sw.bb73: br label %return
sw.bb74: br label %return
sw.bb76: br label %return
sw.bb77: br label %return
sw.bb78: br label %return
sw.bb79: br label %return
sw.bb80: br label %return
sw.bb81: br label %return
sw.bb82: br label %return
sw.bb83: br label %return
sw.bb84: br label %return
sw.bb85: br label %return
sw.bb86: br label %return
sw.bb87: br label %return
sw.bb88: br label %return
sw.bb89: br label %return
sw.bb90: br label %return
sw.bb91: br label %return
sw.bb92: br label %return
sw.bb93: br label %return
sw.bb94: br label %return
sw.bb95: br label %return
sw.bb96: br label %return
sw.bb97: br label %return
sw.bb98: br label %return
sw.bb99: br label %return
sw.bb100: br label %return
sw.bb101: br label %return
sw.bb102: br label %return
sw.bb103: br label %return
sw.bb104: br label %return
sw.bb105: br label %return
sw.bb106: br label %return
sw.bb107: br label %return
sw.bb108: br label %return
sw.bb109: br label %return
sw.bb110: br label %return
sw.bb111: br label %return
sw.bb112: br label %return
sw.bb113: br label %return
sw.bb114: br label %return
sw.bb115: br label %return
sw.bb116: br label %return
sw.bb117: br label %return
sw.bb118: br label %return
sw.bb119: br label %return
sw.bb120: br label %return
sw.bb121: br label %return
sw.bb122: br label %return
sw.bb123: br label %return
sw.bb124: br label %return
sw.bb125: br label %return
sw.bb126: br label %return
sw.bb127: br label %return
sw.bb128: br label %return
sw.bb129: br label %return
sw.bb130: br label %return
sw.bb131: br label %return
sw.bb132: br label %return
sw.bb133: br label %return
sw.bb134: br label %return
sw.bb135: br label %return
sw.bb136: br label %return
sw.bb137: br label %return
sw.bb138: br label %return
sw.bb139: br label %return
sw.bb140: br label %return
sw.bb141: br label %return
sw.bb142: br label %return
sw.bb143: br label %return
sw.bb144: br label %return
sw.bb145: br label %return
sw.bb146: br label %return
sw.bb147: br label %return
sw.bb148: br label %return
sw.bb149: br label %return
sw.bb150: br label %return
sw.bb151: br label %return
sw.bb152: br label %return
sw.bb153: br label %return
sw.bb154: br label %return
sw.bb155: br label %return
sw.bb156: br label %return
sw.bb157: br label %return
sw.bb158: br label %return
sw.bb159: br label %return
sw.bb160: br label %return
sw.bb161: br label %return
sw.bb162: br label %return
sw.bb163: br label %return
sw.bb164: br label %return
sw.bb165: br label %return
sw.bb166: br label %return
sw.bb167: br label %return
sw.bb168: br label %return
sw.bb169: br label %return
sw.bb170: br label %return
sw.bb171: br label %return
sw.bb172: br label %return
sw.bb173: br label %return
sw.bb174: br label %return
sw.bb175: br label %return
sw.bb176: br label %return
sw.bb177: br label %return
sw.bb178: br label %return
sw.bb179: br label %return
sw.bb180: br label %return
sw.bb181: br label %return
sw.bb182: br label %return
sw.bb183: br label %return
sw.bb184: br label %return
sw.bb185: br label %return
sw.bb186: br label %return
sw.bb187: br label %return
sw.bb188: br label %return
sw.bb189: br label %return
sw.bb190: br label %return
sw.bb191: br label %return
sw.bb192: br label %return
sw.bb193: br label %return
sw.bb194: br label %return
sw.bb195: br label %return
sw.bb196: br label %return
sw.bb197: br label %return
sw.bb198: br label %return
sw.bb199: br label %return
sw.bb200: br label %return
sw.bb201: br label %return
sw.bb202: br label %return
sw.bb203: br label %return

return:
  %retval.0 = phi i32 [ 39204, %sw.bb202 ], [ 38809, %sw.bb201 ], [ 38416, %sw.bb200 ], [ 38025, %sw.bb199 ], [ 37636, %sw.bb198 ], [ 37249, %sw.bb197 ], [ 36864, %sw.bb196 ], [ 36481, %sw.bb195 ], [ 36100, %sw.bb194 ], [ 35721, %sw.bb193 ], [ 35344, %sw.bb192 ], [ 34969, %sw.bb191 ], [ 34596, %sw.bb190 ], [ 34225, %sw.bb189 ], [ 33856, %sw.bb188 ], [ 33489, %sw.bb187 ], [ 33124, %sw.bb186 ], [ 32761, %sw.bb185 ], [ 32400, %sw.bb184 ], [ 32041, %sw.bb183 ], [ 31684, %sw.bb182 ], [ 31329, %sw.bb181 ], [ 30976, %sw.bb180 ], [ 30625, %sw.bb179 ], [ 30276, %sw.bb178 ], [ 29929, %sw.bb177 ], [ 29584, %sw.bb176 ], [ 29241, %sw.bb175 ], [ 28900, %sw.bb174 ], [ 28561, %sw.bb173 ], [ 28224, %sw.bb172 ], [ 27889, %sw.bb171 ], [ 27556, %sw.bb170 ], [ 27225, %sw.bb169 ], [ 26896, %sw.bb168 ], [ 26569, %sw.bb167 ], [ 26244, %sw.bb166 ], [ 25921, %sw.bb165 ], [ 25600, %sw.bb164 ], [ 25281, %sw.bb163 ], [ 24964, %sw.bb162 ], [ 24649, %sw.bb161 ], [ 24336, %sw.bb160 ], [ 24025, %sw.bb159 ], [ 23716, %sw.bb158 ], [ 23409, %sw.bb157 ], [ 23104, %sw.bb156 ], [ 22801, %sw.bb155 ], [ 22500, %sw.bb154 ], [ 22201, %sw.bb153 ], [ 21904, %sw.bb152 ], [ 21609, %sw.bb151 ], [ 21316, %sw.bb150 ], [ 21025, %sw.bb149 ], [ 20736, %sw.bb148 ], [ 20449, %sw.bb147 ], [ 20164, %sw.bb146 ], [ 19881, %sw.bb145 ], [ 19600, %sw.bb144 ], [ 19321, %sw.bb143 ], [ 19044, %sw.bb142 ], [ 18769, %sw.bb141 ], [ 18496, %sw.bb140 ], [ 18225, %sw.bb139 ], [ 17956, %sw.bb138 ], [ 17689, %sw.bb137 ], [ 17424, %sw.bb136 ], [ 17161, %sw.bb135 ], [ 16900, %sw.bb134 ], [ 16641, %sw.bb133 ], [ 16384, %sw.bb132 ], [ 16129, %sw.bb131 ], [ 15876, %sw.bb130 ], [ 15625, %sw.bb129 ], [ 15376, %sw.bb128 ], [ 15129, %sw.bb127 ], [ 14884, %sw.bb126 ], [ 14641, %sw.bb125 ], [ 14400, %sw.bb124 ], [ 14161, %sw.bb123 ], [ 13924, %sw.bb122 ], [ 13689, %sw.bb121 ], [ 13456, %sw.bb120 ], [ 13225, %sw.bb119 ], [ 12996, %sw.bb118 ], [ 12769, %sw.bb117 ], [ 12544, %sw.bb116 ], [ 12321, %sw.bb115 ], [ 12100, %sw.bb114 ], [ 11881, %sw.bb113 ], [ 11664, %sw.bb112 ], [ 11449, %sw.bb111 ], [ 11236, %sw.bb110 ], [ 11025, %sw.bb109 ], [ 10816, %sw.bb108 ], [ 10609, %sw.bb107 ], [ 10404, %sw.bb106 ], [ 10201, %sw.bb105 ], [ 10000, %sw.bb104 ], [ 9801, %sw.bb103 ], [ 9604, %sw.bb102 ], [ 9409, %sw.bb101 ], [ 9216, %sw.bb100 ], [ 9025, %sw.bb99 ], [ 8836, %sw.bb98 ], [ 8649, %sw.bb97 ], [ 8464, %sw.bb96 ], [ 8281, %sw.bb95 ], [ 8100, %sw.bb94 ], [ 7921, %sw.bb93 ], [ 7744, %sw.bb92 ], [ 7569, %sw.bb91 ], [ 7396, %sw.bb90 ], [ 7225, %sw.bb89 ], [ 7056, %sw.bb88 ], [ 6889, %sw.bb87 ], [ 6724, %sw.bb86 ], [ 6561, %sw.bb85 ], [ 6400, %sw.bb84 ], [ 6241, %sw.bb83 ], [ 6084, %sw.bb82 ], [ 5929, %sw.bb81 ], [ 5776, %sw.bb80 ], [ 5625, %sw.bb79 ], [ 5476, %sw.bb78 ], [ 5329, %sw.bb77 ], [ 5184, %sw.bb76 ], [ 5112, %sw.bb74 ], [ 4900, %sw.bb73 ], [ 4761, %sw.bb72 ], [ 4624, %sw.bb71 ], [ 4489, %sw.bb70 ], [ 4356, %sw.bb69 ], [ 4225, %sw.bb68 ], [ 4096, %sw.bb67 ], [ 3969, %sw.bb66 ], [ 3844, %sw.bb65 ], [ 3721, %sw.bb64 ], [ 3600, %sw.bb63 ], [ 3481, %sw.bb62 ], [ 3364, %sw.bb61 ], [ 3249, %sw.bb60 ], [ 3136, %sw.bb59 ], [ 3025, %sw.bb58 ], [ 2970, %sw.bb56 ], [ 2809, %sw.bb55 ], [ 2704, %sw.bb54 ], [ 2601, %sw.bb53 ], [ 2500, %sw.bb52 ], [ 2401, %sw.bb51 ], [ 2304, %sw.bb50 ], [ 2209, %sw.bb49 ], [ 2116, %sw.bb48 ], [ 2025, %sw.bb47 ], [ 1980, %sw.bb45 ], [ 1849, %sw.bb44 ], [ 1764, %sw.bb43 ], [ 1681, %sw.bb42 ], [ 1600, %sw.bb41 ], [ 1521, %sw.bb40 ], [ 1444, %sw.bb39 ], [ 1369, %sw.bb38 ], [ 1296, %sw.bb37 ], [ 1260, %sw.bb35 ], [ 1156, %sw.bb34 ], [ 1089, %sw.bb33 ], [ 1024, %sw.bb32 ], [ 961, %sw.bb31 ], [ 900, %sw.bb30 ], [ 841, %sw.bb29 ], [ 784, %sw.bb28 ], [ 729, %sw.bb27 ], [ 676, %sw.bb26 ], [ 625, %sw.bb25 ], [ 576, %sw.bb24 ], [ 529, %sw.bb23 ], [ 484, %sw.bb22 ], [ 441, %sw.bb21 ], [ 400, %sw.bb20 ], [ 361, %sw.bb19 ], [ 342, %sw.bb18 ], [ 289, %sw.bb17 ], [ 256, %sw.bb16 ], [ 225, %sw.bb15 ], [ 196, %sw.bb14 ], [ 169, %sw.bb13 ], [ 144, %sw.bb12 ], [ 121, %sw.bb11 ], [ 100, %sw.bb10 ], [ 81, %sw.bb9 ], [ 64, %sw.bb8 ], [ 49, %sw.bb7 ], [ 36, %sw.bb6 ], [ 25, %sw.bb5 ], [ 16, %sw.bb4 ], [ 9, %sw.bb3 ], [ 4, %sw.bb2 ], [ 1, %sw.bb1 ], [ 39601, %sw.bb203 ], [ 0, %if.end ]
  ret i32 %retval.0
}

define i32 @cprop(i32 %x, i32 %y) {
; CHECK-LABEL: @cprop(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[SWITCH_TABLEIDX:%.*]] = sub i32 [[X:%.*]], 1
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[SWITCH_TABLEIDX]], 7
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[RETURN:%.*]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_GEP:%.*]] = getelementptr inbounds [7 x i32], [7 x i32]* @switch.table.cprop, i32 0, i32 [[SWITCH_TABLEIDX]]
; CHECK-NEXT:    [[SWITCH_LOAD:%.*]] = load i32, i32* [[SWITCH_GEP]], align 4
; CHECK-NEXT:    ret i32 [[SWITCH_LOAD]]
; CHECK:       return:
; CHECK-NEXT:    ret i32 123
;
entry:
  switch i32 %x, label %sw.default [
  i32 1, label %return
  i32 2, label %sw.bb1
  i32 3, label %sw.bb2
  i32 4, label %sw.bb2
  i32 5, label %sw.bb2
  i32 6, label %sw.bb3
  i32 7, label %sw.bb3
  ]

sw.bb1: br label %return

sw.bb2:
  %and = and i32 %x, 1
  %and.ptr = inttoptr i32 %and to i8*
  %tobool = icmp ne i8* %and.ptr, null
  %cond = select i1 %tobool, i32 -123, i32 456
  %sub = sub nsw i32 %x, %cond
  br label %return

sw.bb3:
  %trunc = trunc i32 %x to i8
  %sext = sext i8 %trunc to i32
  %select.i = icmp sgt i32 %sext, 0
  %select = select i1 %select.i, i32 %sext, i32 %y
  br label %return

sw.default:
  br label %return

return:
  %retval.0 = phi i32 [ 123, %sw.default ], [ %select, %sw.bb3 ], [ %sub, %sw.bb2 ], [ 42, %sw.bb1 ], [ 5, %entry ]
  ret i32 %retval.0

}

define i32 @unreachable_case(i32 %x)  {
; CHECK-LABEL: @unreachable_case(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[X:%.*]], 9
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[RETURN:%.*]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_GEP:%.*]] = getelementptr inbounds [9 x i32], [9 x i32]* @switch.table.unreachable_case, i32 0, i32 [[X]]
; CHECK-NEXT:    [[SWITCH_LOAD:%.*]] = load i32, i32* [[SWITCH_GEP]], align 4
; CHECK-NEXT:    ret i32 [[SWITCH_LOAD]]
; CHECK:       return:
; CHECK-NEXT:    ret i32 2
;
entry:
  switch i32 %x, label %sw.default [
  i32 0, label %sw.bb
  i32 1, label %sw.bb
  i32 2, label %sw.bb
  i32 3, label %sw.bb1
  i32 4, label %sw.bb2
  i32 5, label %sw.bb3
  i32 6, label %sw.bb3
  i32 7, label %sw.bb3
  i32 8, label %sw.bb3
  ]

sw.bb: br label %return
sw.bb1: unreachable
sw.bb2: br label %return
sw.bb3: br label %return
sw.default: br label %return

return:
  %retval.0 = phi i32 [ 1, %sw.bb3 ], [ -1, %sw.bb2 ], [ 0, %sw.bb ], [ 2, %sw.default ]
  ret i32 %retval.0

}

define i32 @unreachable_default(i32 %x)  {
; CHECK-LABEL: @unreachable_default(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[SWITCH_GEP:%.*]] = getelementptr inbounds [4 x i32], [4 x i32]* @switch.table.unreachable_default, i32 0, i32 [[X:%.*]]
; CHECK-NEXT:    [[SWITCH_LOAD:%.*]] = load i32, i32* [[SWITCH_GEP]], align 4
; CHECK-NEXT:    ret i32 [[SWITCH_LOAD]]
;
entry:
  switch i32 %x, label %default [
  i32 0, label %bb0
  i32 1, label %bb1
  i32 2, label %bb2
  i32 3, label %bb3
  ]

bb0: br label %return
bb1: br label %return
bb2: br label %return
bb3: br label %return
default: unreachable

return:
  %retval = phi i32 [ 42, %bb0 ], [ 52, %bb1 ], [ 1, %bb2 ], [ 2, %bb3 ]
  ret i32 %retval

}

; Don't create a table with illegal type
define i96 @illegaltype(i32 %c) {
; CHECK-LABEL: @illegaltype(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    switch i32 [[C:%.*]], label [[SW_DEFAULT:%.*]] [
; CHECK-NEXT:    i32 42, label [[RETURN:%.*]]
; CHECK-NEXT:    i32 43, label [[SW_BB1:%.*]]
; CHECK-NEXT:    i32 44, label [[SW_BB2:%.*]]
; CHECK-NEXT:    i32 45, label [[SW_BB3:%.*]]
; CHECK-NEXT:    i32 46, label [[SW_BB4:%.*]]
; CHECK-NEXT:    ]
; CHECK:       sw.bb1:
; CHECK-NEXT:    br label [[RETURN]]
; CHECK:       sw.bb2:
; CHECK-NEXT:    br label [[RETURN]]
; CHECK:       sw.bb3:
; CHECK-NEXT:    br label [[RETURN]]
; CHECK:       sw.bb4:
; CHECK-NEXT:    br label [[RETURN]]
; CHECK:       sw.default:
; CHECK-NEXT:    br label [[RETURN]]
; CHECK:       return:
; CHECK-NEXT:    [[RETVAL_0:%.*]] = phi i96 [ 15, [[SW_DEFAULT]] ], [ 27, [[SW_BB4]] ], [ -1, [[SW_BB3]] ], [ 0, [[SW_BB2]] ], [ 123, [[SW_BB1]] ], [ 55, [[ENTRY:%.*]] ]
; CHECK-NEXT:    ret i96 [[RETVAL_0]]
;
entry:
  switch i32 %c, label %sw.default [
  i32 42, label %return
  i32 43, label %sw.bb1
  i32 44, label %sw.bb2
  i32 45, label %sw.bb3
  i32 46, label %sw.bb4
  ]

sw.bb1: br label %return
sw.bb2: br label %return
sw.bb3: br label %return
sw.bb4: br label %return
sw.default: br label %return
return:
  %retval.0 = phi i96 [ 15, %sw.default ], [ 27, %sw.bb4 ], [ -1, %sw.bb3 ], [ 0, %sw.bb2 ], [ 123, %sw.bb1 ], [ 55, %entry ]
  ret i96 %retval.0

}

; If we can build a lookup table without any holes, we don't need a default result.
declare void @exit(i32)
define i32 @nodefaultnoholes(i32 %c) {
; CHECK-LABEL: @nodefaultnoholes(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[C:%.*]], 4
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[SW_DEFAULT:%.*]]
; CHECK:       sw.default:
; CHECK-NEXT:    call void @exit(i32 1)
; CHECK-NEXT:    unreachable
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_GEP:%.*]] = getelementptr inbounds [4 x i32], [4 x i32]* @switch.table.nodefaultnoholes, i32 0, i32 [[C]]
; CHECK-NEXT:    [[SWITCH_LOAD:%.*]] = load i32, i32* [[SWITCH_GEP]], align 4
; CHECK-NEXT:    ret i32 [[SWITCH_LOAD]]
;
entry:
  switch i32 %c, label %sw.default [
  i32 0, label %return
  i32 1, label %sw.bb1
  i32 2, label %sw.bb2
  i32 3, label %sw.bb3
  ]

sw.bb1: br label %return
sw.bb2: br label %return
sw.bb3: br label %return
sw.default: call void @exit(i32 1)
  unreachable
return:
  %x = phi i32 [ -1, %sw.bb3 ], [ 0, %sw.bb2 ], [ 123, %sw.bb1 ], [ 55, %entry ]
  ret i32 %x

}

; This lookup table will have holes, so we need to test for the holes.
define i32 @nodefaultwithholes(i32 %c) {
; CHECK-LABEL: @nodefaultwithholes(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[C:%.*]], 6
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_HOLE_CHECK:%.*]], label [[SW_DEFAULT:%.*]]
; CHECK:       sw.default:
; CHECK-NEXT:    call void @exit(i32 1)
; CHECK-NEXT:    unreachable
; CHECK:       switch.hole_check:
; CHECK-NEXT:    [[SWITCH_MASKINDEX:%.*]] = trunc i32 [[C]] to i8
; CHECK-NEXT:    [[SWITCH_SHIFTED:%.*]] = lshr i8 47, [[SWITCH_MASKINDEX]]
; CHECK-NEXT:    [[SWITCH_LOBIT:%.*]] = trunc i8 [[SWITCH_SHIFTED]] to i1
; CHECK-NEXT:    br i1 [[SWITCH_LOBIT]], label [[SWITCH_LOOKUP:%.*]], label [[SW_DEFAULT]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_GEP:%.*]] = getelementptr inbounds [6 x i32], [6 x i32]* @switch.table.nodefaultwithholes, i32 0, i32 [[C]]
; CHECK-NEXT:    [[SWITCH_LOAD:%.*]] = load i32, i32* [[SWITCH_GEP]], align 4
; CHECK-NEXT:    ret i32 [[SWITCH_LOAD]]
;
entry:
  switch i32 %c, label %sw.default [
  i32 0, label %return
  i32 1, label %sw.bb1
  i32 2, label %sw.bb2
  i32 3, label %sw.bb3
  i32 5, label %sw.bb3
  ]

sw.bb1: br label %return
sw.bb2: br label %return
sw.bb3: br label %return
sw.default: call void @exit(i32 1)
  unreachable
return:
  %x = phi i32 [ -1, %sw.bb3 ], [ 0, %sw.bb2 ], [ 123, %sw.bb1 ], [ 55, %entry ]
  ret i32 %x

; The mask is binary 101111.
}

; We don't build lookup tables with holes for switches with less than four cases.
define i32 @threecasesholes(i32 %c) {
; CHECK-LABEL: @threecasesholes(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    switch i32 [[C:%.*]], label [[SW_DEFAULT:%.*]] [
; CHECK-NEXT:    i32 0, label [[RETURN:%.*]]
; CHECK-NEXT:    i32 1, label [[SW_BB1:%.*]]
; CHECK-NEXT:    i32 3, label [[SW_BB2:%.*]]
; CHECK-NEXT:    ]
; CHECK:       sw.bb1:
; CHECK-NEXT:    br label [[RETURN]]
; CHECK:       sw.bb2:
; CHECK-NEXT:    br label [[RETURN]]
; CHECK:       sw.default:
; CHECK-NEXT:    br label [[RETURN]]
; CHECK:       return:
; CHECK-NEXT:    [[X:%.*]] = phi i32 [ [[C]], [[SW_DEFAULT]] ], [ 5, [[SW_BB2]] ], [ 7, [[SW_BB1]] ], [ 9, [[ENTRY:%.*]] ]
; CHECK-NEXT:    ret i32 [[X]]
;
entry:
  switch i32 %c, label %sw.default [
  i32 0, label %return
  i32 1, label %sw.bb1
  i32 3, label %sw.bb2
  ]
sw.bb1: br label %return
sw.bb2: br label %return
sw.default: br label %return
return:
  %x = phi i32 [ %c, %sw.default ], [ 5, %sw.bb2 ], [ 7, %sw.bb1 ], [ 9, %entry ]
  ret i32 %x
}

; We build lookup tables for switches with three or more cases.
define i32 @threecases(i32 %c) {
; CHECK-LABEL: @threecases(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[C:%.*]], 3
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[RETURN:%.*]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_GEP:%.*]] = getelementptr inbounds [3 x i32], [3 x i32]* @switch.table.threecases, i32 0, i32 [[C]]
; CHECK-NEXT:    [[SWITCH_LOAD:%.*]] = load i32, i32* [[SWITCH_GEP]], align 4
; CHECK-NEXT:    ret i32 [[SWITCH_LOAD]]
; CHECK:       return:
; CHECK-NEXT:    ret i32 3
;
entry:
  switch i32 %c, label %sw.default [
  i32 0, label %return
  i32 1, label %sw.bb1
  i32 2, label %sw.bb2
  ]
sw.bb1:
  br label %return
sw.bb2:
  br label %return
sw.default:
  br label %return
return:
  %x = phi i32 [ 3, %sw.default ], [ 5, %sw.bb2 ], [ 7, %sw.bb1 ], [ 10, %entry ]
  ret i32 %x
}

; We don't build tables for switches with two cases.
define i32 @twocases(i32 %c) {
; CHECK-LABEL: @twocases(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[SWITCH_SELECTCMP:%.*]] = icmp eq i32 [[C:%.*]], 1
; CHECK-NEXT:    [[SWITCH_SELECT:%.*]] = select i1 [[SWITCH_SELECTCMP]], i32 7, i32 3
; CHECK-NEXT:    [[SWITCH_SELECTCMP1:%.*]] = icmp eq i32 [[C]], 0
; CHECK-NEXT:    [[SWITCH_SELECT2:%.*]] = select i1 [[SWITCH_SELECTCMP1]], i32 9, i32 [[SWITCH_SELECT]]
; CHECK-NEXT:    ret i32 [[SWITCH_SELECT2]]
;
entry:
  switch i32 %c, label %sw.default [
  i32 0, label %return
  i32 1, label %sw.bb1
  ]
sw.bb1:
  br label %return
sw.default:
  br label %return
return:
  %x = phi i32 [ 3, %sw.default ], [ 7, %sw.bb1 ], [ 9, %entry ]
  ret i32 %x
}

; Don't build tables for switches with TLS variables.
@tls_a = thread_local global i32 0
@tls_b = thread_local global i32 0
@tls_c = thread_local global i32 0
@tls_d = thread_local global i32 0
define i32* @tls(i32 %x) {
; CHECK-LABEL: @tls(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    switch i32 [[X:%.*]], label [[SW_DEFAULT:%.*]] [
; CHECK-NEXT:    i32 0, label [[RETURN:%.*]]
; CHECK-NEXT:    i32 1, label [[SW_BB1:%.*]]
; CHECK-NEXT:    i32 2, label [[SW_BB2:%.*]]
; CHECK-NEXT:    ]
; CHECK:       sw.bb1:
; CHECK-NEXT:    br label [[RETURN]]
; CHECK:       sw.bb2:
; CHECK-NEXT:    br label [[RETURN]]
; CHECK:       sw.default:
; CHECK-NEXT:    br label [[RETURN]]
; CHECK:       return:
; CHECK-NEXT:    [[RETVAL_0:%.*]] = phi i32* [ @tls_d, [[SW_DEFAULT]] ], [ @tls_c, [[SW_BB2]] ], [ @tls_b, [[SW_BB1]] ], [ @tls_a, [[ENTRY:%.*]] ]
; CHECK-NEXT:    ret i32* [[RETVAL_0]]
;
entry:
  switch i32 %x, label %sw.default [
  i32 0, label %return
  i32 1, label %sw.bb1
  i32 2, label %sw.bb2
  ]
sw.bb1:
  br label %return
sw.bb2:
  br label %return
sw.default:
  br label %return
return:
  %retval.0 = phi i32* [ @tls_d, %sw.default ], [ @tls_c, %sw.bb2 ], [ @tls_b, %sw.bb1 ], [ @tls_a, %entry ]
  ret i32* %retval.0
}

; Don't build tables for switches with dllimport variables.
@dllimport_a = external dllimport global [3x i32]
@dllimport_b = external dllimport global [3x i32]
@dllimport_c = external dllimport global [3x i32]
@dllimport_d = external dllimport global [3x i32]
define i32* @dllimport(i32 %x) {
; CHECK-LABEL: @dllimport(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    switch i32 [[X:%.*]], label [[SW_DEFAULT:%.*]] [
; CHECK-NEXT:    i32 0, label [[RETURN:%.*]]
; CHECK-NEXT:    i32 1, label [[SW_BB1:%.*]]
; CHECK-NEXT:    i32 2, label [[SW_BB2:%.*]]
; CHECK-NEXT:    ]
; CHECK:       sw.bb1:
; CHECK-NEXT:    br label [[RETURN]]
; CHECK:       sw.bb2:
; CHECK-NEXT:    br label [[RETURN]]
; CHECK:       sw.default:
; CHECK-NEXT:    br label [[RETURN]]
; CHECK:       return:
; CHECK-NEXT:    [[RETVAL_0:%.*]] = phi i32* [ getelementptr inbounds ([3 x i32], [3 x i32]* @dllimport_d, i32 0, i32 0), [[SW_DEFAULT]] ], [ getelementptr inbounds ([3 x i32], [3 x i32]* @dllimport_c, i32 0, i32 0), [[SW_BB2]] ], [ getelementptr inbounds ([3 x i32], [3 x i32]* @dllimport_b, i32 0, i32 0), [[SW_BB1]] ], [ getelementptr inbounds ([3 x i32], [3 x i32]* @dllimport_a, i32 0, i32 0), [[ENTRY:%.*]] ]
; CHECK-NEXT:    ret i32* [[RETVAL_0]]
;
entry:
  switch i32 %x, label %sw.default [
  i32 0, label %return
  i32 1, label %sw.bb1
  i32 2, label %sw.bb2
  ]
sw.bb1:
  br label %return
sw.bb2:
  br label %return
sw.default:
  br label %return
return:
  %retval.0 = phi i32* [ getelementptr inbounds ([3 x i32], [3 x i32]* @dllimport_d, i32 0, i32 0), %sw.default ],
  [ getelementptr inbounds ([3 x i32], [3 x i32]* @dllimport_c, i32 0, i32 0), %sw.bb2 ],
  [ getelementptr inbounds ([3 x i32], [3 x i32]* @dllimport_b, i32 0, i32 0), %sw.bb1 ],
  [ getelementptr inbounds ([3 x i32], [3 x i32]* @dllimport_a, i32 0, i32 0), %entry ]
  ret i32* %retval.0
}

; We can use linear mapping.
define i8 @linearmap1(i32 %c) {
; CHECK-LABEL: @linearmap1(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[SWITCH_TABLEIDX:%.*]] = sub i32 [[C:%.*]], 10
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[SWITCH_TABLEIDX]], 4
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[RETURN:%.*]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_IDX_CAST:%.*]] = trunc i32 [[SWITCH_TABLEIDX]] to i8
; CHECK-NEXT:    [[SWITCH_IDX_MULT:%.*]] = mul i8 [[SWITCH_IDX_CAST]], -5
; CHECK-NEXT:    [[SWITCH_OFFSET:%.*]] = add i8 [[SWITCH_IDX_MULT]], 18
; CHECK-NEXT:    ret i8 [[SWITCH_OFFSET]]
; CHECK:       return:
; CHECK-NEXT:    ret i8 3
;
entry:
  switch i32 %c, label %sw.default [
  i32 10, label %return
  i32 11, label %sw.bb1
  i32 12, label %sw.bb2
  i32 13, label %sw.bb3
  ]
sw.bb1: br label %return
sw.bb2: br label %return
sw.bb3: br label %return
sw.default: br label %return
return:
  %x = phi i8 [ 3, %sw.default ], [ 3, %sw.bb3 ], [ 8, %sw.bb2 ], [ 13, %sw.bb1 ], [ 18, %entry ]
  ret i8 %x
}

; Linear mapping in a different configuration.
define i32 @linearmap2(i8 %c) {
; CHECK-LABEL: @linearmap2(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[SWITCH_TABLEIDX:%.*]] = sub i8 [[C:%.*]], -13
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i8 [[SWITCH_TABLEIDX]], 4
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[RETURN:%.*]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_IDX_CAST:%.*]] = zext i8 [[SWITCH_TABLEIDX]] to i32
; CHECK-NEXT:    [[SWITCH_OFFSET:%.*]] = add i32 [[SWITCH_IDX_CAST]], 18
; CHECK-NEXT:    ret i32 [[SWITCH_OFFSET]]
; CHECK:       return:
; CHECK-NEXT:    ret i32 3
;
entry:
  switch i8 %c, label %sw.default [
  i8 -10, label %return
  i8 -11, label %sw.bb1
  i8 -12, label %sw.bb2
  i8 -13, label %sw.bb3
  ]
sw.bb1: br label %return
sw.bb2: br label %return
sw.bb3: br label %return
sw.default: br label %return
return:
  %x = phi i32 [ 3, %sw.default ], [ 18, %sw.bb3 ], [ 19, %sw.bb2 ], [ 20, %sw.bb1 ], [ 21, %entry ]
  ret i32 %x
}

; Linear mapping with overflows.
define i8 @linearmap3(i32 %c) {
; CHECK-LABEL: @linearmap3(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[SWITCH_TABLEIDX:%.*]] = sub i32 [[C:%.*]], 10
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[SWITCH_TABLEIDX]], 4
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[RETURN:%.*]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_IDX_CAST:%.*]] = trunc i32 [[SWITCH_TABLEIDX]] to i8
; CHECK-NEXT:    [[SWITCH_IDX_MULT:%.*]] = mul i8 [[SWITCH_IDX_CAST]], 100
; CHECK-NEXT:    ret i8 [[SWITCH_IDX_MULT]]
; CHECK:       return:
; CHECK-NEXT:    ret i8 3
;
entry:
  switch i32 %c, label %sw.default [
  i32 10, label %return
  i32 11, label %sw.bb1
  i32 12, label %sw.bb2
  i32 13, label %sw.bb3
  ]
sw.bb1: br label %return
sw.bb2: br label %return
sw.bb3: br label %return
sw.default: br label %return
return:
  %x = phi i8 [ 3, %sw.default ], [ 44, %sw.bb3 ], [ -56, %sw.bb2 ], [ 100, %sw.bb1 ], [ 0, %entry ]
  ret i8 %x
}

; Linear mapping with with multiplier 1 and offset 0.
define i8 @linearmap4(i32 %c) {
; CHECK-LABEL: @linearmap4(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[SWITCH_TABLEIDX:%.*]] = sub i32 [[C:%.*]], -2
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[SWITCH_TABLEIDX]], 4
; CHECK-NEXT:    br i1 [[TMP0]], label [[SWITCH_LOOKUP:%.*]], label [[RETURN:%.*]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_IDX_CAST:%.*]] = trunc i32 [[SWITCH_TABLEIDX]] to i8
; CHECK-NEXT:    ret i8 [[SWITCH_IDX_CAST]]
; CHECK:       return:
; CHECK-NEXT:    ret i8 3
;
entry:
  switch i32 %c, label %sw.default [
  i32 -2, label %return
  i32 -1, label %sw.bb1
  i32 0, label %sw.bb2
  i32 1, label %sw.bb3
  ]
sw.bb1: br label %return
sw.bb2: br label %return
sw.bb3: br label %return
sw.default: br label %return
return:
  %x = phi i8 [ 3, %sw.default ], [ 3, %sw.bb3 ], [ 2, %sw.bb2 ], [ 1, %sw.bb1 ], [ 0, %entry ]
  ret i8 %x
}

; Reuse the inverted table range compare.
define i32 @reuse_cmp1(i32 %x) {
; CHECK-LABEL: @reuse_cmp1(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[X:%.*]], 4
; CHECK-NEXT:    [[INVERTED_CMP:%.*]] = xor i1 [[TMP0]], true
; CHECK-NEXT:    [[SWITCH_OFFSET:%.*]] = add i32 [[X]], 10
; CHECK-NEXT:    [[R_0:%.*]] = select i1 [[TMP0]], i32 [[SWITCH_OFFSET]], i32 0
; CHECK-NEXT:    [[CMP:%.*]] = icmp eq i32 [[R_0]], 0
; CHECK-NEXT:    [[DOTR_0:%.*]] = select i1 [[INVERTED_CMP]], i32 100, i32 [[R_0]]
; CHECK-NEXT:    ret i32 [[DOTR_0]]
;
entry:
  switch i32 %x, label %sw.default [
  i32 0, label %sw.bb
  i32 1, label %sw.bb1
  i32 2, label %sw.bb2
  i32 3, label %sw.bb3
  ]
sw.bb: br label %sw.epilog
sw.bb1: br label %sw.epilog
sw.bb2: br label %sw.epilog
sw.bb3: br label %sw.epilog
sw.default: br label %sw.epilog
sw.epilog:
  %r.0 = phi i32 [ 0, %sw.default ], [ 13, %sw.bb3 ], [ 12, %sw.bb2 ], [ 11, %sw.bb1 ], [ 10, %sw.bb ]
  %cmp = icmp eq i32 %r.0, 0       ; This compare can be "replaced".
  br i1 %cmp, label %if.then, label %if.end
if.then: br label %return
if.end: br label %return
return:
  %retval.0 = phi i32 [ 100, %if.then ], [ %r.0, %if.end ]
  ret i32 %retval.0
}

; Reuse the table range compare.
define i32 @reuse_cmp2(i32 %x) {
; CHECK-LABEL: @reuse_cmp2(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[X:%.*]], 4
; CHECK-NEXT:    [[X_:%.*]] = select i1 [[TMP0]], i32 [[X]], i32 4
; CHECK-NEXT:    [[CMP:%.*]] = icmp ne i32 [[X_]], 4
; CHECK-NEXT:    [[RETVAL_0:%.*]] = select i1 [[TMP0]], i32 [[X_]], i32 100
; CHECK-NEXT:    ret i32 [[RETVAL_0]]
;
entry:
  switch i32 %x, label %sw.default [
  i32 0, label %sw.bb
  i32 1, label %sw.bb1
  i32 2, label %sw.bb2
  i32 3, label %sw.bb3
  ]
sw.bb: br label %sw.epilog
sw.bb1: br label %sw.epilog
sw.bb2: br label %sw.epilog
sw.bb3: br label %sw.epilog
sw.default: br label %sw.epilog
sw.epilog:
  %r.0 = phi i32 [ 4, %sw.default ], [ 3, %sw.bb3 ], [ 2, %sw.bb2 ], [ 1, %sw.bb1 ], [ 0, %sw.bb ]
  %cmp = icmp ne i32 %r.0, 4       ; This compare can be "replaced".
  br i1 %cmp, label %if.then, label %if.end
if.then: br label %return
if.end: br label %return
return:
  %retval.0 = phi i32 [ %r.0, %if.then ], [ 100, %if.end ]
  ret i32 %retval.0
}

; Cannot reuse the table range compare, because the default value is the same
; as one of the case values.
define i32 @no_reuse_cmp(i32 %x) {
; CHECK-LABEL: @no_reuse_cmp(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[X:%.*]], 4
; CHECK-NEXT:    [[SWITCH_OFFSET:%.*]] = add i32 [[X]], 10
; CHECK-NEXT:    [[R_0:%.*]] = select i1 [[TMP0]], i32 [[SWITCH_OFFSET]], i32 12
; CHECK-NEXT:    [[CMP:%.*]] = icmp ne i32 [[R_0]], 0
; CHECK-NEXT:    [[R_0_:%.*]] = select i1 [[CMP]], i32 [[R_0]], i32 100
; CHECK-NEXT:    ret i32 [[R_0_]]
;
entry:
  switch i32 %x, label %sw.default [
  i32 0, label %sw.bb
  i32 1, label %sw.bb1
  i32 2, label %sw.bb2
  i32 3, label %sw.bb3
  ]
sw.bb: br label %sw.epilog
sw.bb1: br label %sw.epilog
sw.bb2: br label %sw.epilog
sw.bb3: br label %sw.epilog
sw.default: br label %sw.epilog
sw.epilog:
  %r.0 = phi i32 [ 12, %sw.default ], [ 13, %sw.bb3 ], [ 12, %sw.bb2 ], [ 11, %sw.bb1 ], [ 10, %sw.bb ]
  %cmp = icmp ne i32 %r.0, 0
  br i1 %cmp, label %if.then, label %if.end
if.then: br label %return
if.end: br label %return
return:
  %retval.0 = phi i32 [ %r.0, %if.then ], [ 100, %if.end ]
  ret i32 %retval.0
}

; Cannot reuse the table range compare, because the phi at the switch merge
; point is not dominated by the switch.
define i32 @no_reuse_cmp2(i32 %x, i32 %y) {
; CHECK-LABEL: @no_reuse_cmp2(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[EC:%.*]] = icmp ne i32 [[Y:%.*]], 0
; CHECK-NEXT:    [[TMP0:%.*]] = icmp ult i32 [[X:%.*]], 4
; CHECK-NEXT:    [[SWITCH_OFFSET:%.*]] = add i32 [[X]], 10
; CHECK-NEXT:    [[SPEC_SELECT:%.*]] = select i1 [[TMP0]], i32 [[SWITCH_OFFSET]], i32 0
; CHECK-NEXT:    [[R_0:%.*]] = select i1 [[EC]], i32 [[SPEC_SELECT]], i32 100
; CHECK-NEXT:    [[CMP:%.*]] = icmp eq i32 [[R_0]], 0
; CHECK-NEXT:    [[DOTR_0:%.*]] = select i1 [[CMP]], i32 100, i32 [[R_0]]
; CHECK-NEXT:    ret i32 [[DOTR_0]]
;
entry:
  %ec = icmp ne i32 %y, 0
  br i1 %ec, label %switch.entry, label %sw.epilog
switch.entry:
  switch i32 %x, label %sw.default [
  i32 0, label %sw.bb
  i32 1, label %sw.bb1
  i32 2, label %sw.bb2
  i32 3, label %sw.bb3
  ]
sw.bb: br label %sw.epilog
sw.bb1: br label %sw.epilog
sw.bb2: br label %sw.epilog
sw.bb3: br label %sw.epilog
sw.default: br label %sw.epilog
sw.epilog:
  %r.0 = phi i32 [100, %entry], [ 0, %sw.default ], [ 13, %sw.bb3 ], [ 12, %sw.bb2 ], [ 11, %sw.bb1 ], [ 10, %sw.bb ]
  %cmp = icmp eq i32 %r.0, 0       ; This compare can be "replaced".
  br i1 %cmp, label %if.then, label %if.end
if.then: br label %return
if.end: br label %return
return:
  %retval.0 = phi i32 [ 100, %if.then ], [ %r.0, %if.end ]
  ret i32 %retval.0
}

define void @pr20210(i8 %x, i1 %y) {
; %z has uses outside of its BB or the phi it feeds into,
; so doing a table lookup and jumping directly to while.cond would
; cause %z to cease dominating all its uses.
; CHECK-LABEL: @pr20210(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    br i1 [[Y:%.*]], label [[SW:%.*]], label [[INTERMEDIATE:%.*]]
; CHECK:       sw:
; CHECK-NEXT:    switch i8 [[X:%.*]], label [[END:%.*]] [
; CHECK-NEXT:    i8 7, label [[INTERMEDIATE]]
; CHECK-NEXT:    i8 3, label [[INTERMEDIATE]]
; CHECK-NEXT:    i8 2, label [[INTERMEDIATE]]
; CHECK-NEXT:    i8 1, label [[INTERMEDIATE]]
; CHECK-NEXT:    i8 0, label [[INTERMEDIATE]]
; CHECK-NEXT:    ]
; CHECK:       intermediate:
; CHECK-NEXT:    [[Z:%.*]] = zext i8 [[X]] to i32
; CHECK-NEXT:    br label [[WHILE_COND:%.*]]
; CHECK:       while.cond:
; CHECK-NEXT:    [[I:%.*]] = phi i32 [ [[Z]], [[INTERMEDIATE]] ], [ [[J:%.*]], [[WHILE_BODY:%.*]] ]
; CHECK-NEXT:    [[B:%.*]] = icmp ne i32 [[I]], 7
; CHECK-NEXT:    br i1 [[B]], label [[WHILE_BODY]], label [[WHILE_END:%.*]]
; CHECK:       while.body:
; CHECK-NEXT:    [[J]] = add i32 [[I]], 1
; CHECK-NEXT:    br label [[WHILE_COND]]
; CHECK:       while.end:
; CHECK-NEXT:    call void @exit(i32 [[Z]])
; CHECK-NEXT:    unreachable
; CHECK:       end:
; CHECK-NEXT:    ret void
;
entry:
  br i1 %y, label %sw, label %intermediate

sw:
  switch i8 %x, label %end [
  i8 7, label %intermediate
  i8 3, label %intermediate
  i8 2, label %intermediate
  i8 1, label %intermediate
  i8 0, label %intermediate
  ]

intermediate:
  %z = zext i8 %x to i32
  br label %while.cond

while.cond:
  %i = phi i32 [ %z, %intermediate ], [ %j, %while.body ]
  %b = icmp ne i32 %i, 7
  br i1 %b, label %while.body, label %while.end

while.body:
  %j = add i32 %i, 1
  br label %while.cond

while.end:
  call void @exit(i32 %z)
  unreachable

end:
  ret void
}

; Make sure we do not crash due to trying to generate an unguarded
; lookup (since i3 can only hold values in the range of explicit
; values) and simultaneously trying to generate a branch to deal with
; the fact that we have holes in the range.
define i32 @covered_switch_with_bit_tests(i3) {
; CHECK-LABEL: @covered_switch_with_bit_tests(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    [[SWITCH_TABLEIDX:%.*]] = sub i3 [[TMP0:%.*]], -4
; CHECK-NEXT:    [[SWITCH_MASKINDEX:%.*]] = zext i3 [[SWITCH_TABLEIDX]] to i8
; CHECK-NEXT:    [[SWITCH_SHIFTED:%.*]] = lshr i8 -61, [[SWITCH_MASKINDEX]]
; CHECK-NEXT:    [[SWITCH_LOBIT:%.*]] = trunc i8 [[SWITCH_SHIFTED]] to i1
; CHECK-NEXT:    br i1 [[SWITCH_LOBIT]], label [[SWITCH_LOOKUP:%.*]], label [[L6:%.*]]
; CHECK:       switch.lookup:
; CHECK-NEXT:    [[SWITCH_TABLEIDX_ZEXT:%.*]] = zext i3 [[SWITCH_TABLEIDX]] to i4
; CHECK-NEXT:    [[SWITCH_GEP:%.*]] = getelementptr inbounds [8 x i32], [8 x i32]* @switch.table.covered_switch_with_bit_tests, i32 0, i4 [[SWITCH_TABLEIDX_ZEXT]]
; CHECK-NEXT:    [[SWITCH_LOAD:%.*]] = load i32, i32* [[SWITCH_GEP]], align 4
; CHECK-NEXT:    br label [[L6]]
; CHECK:       l6:
; CHECK-NEXT:    [[R:%.*]] = phi i32 [ 0, [[ENTRY:%.*]] ], [ [[SWITCH_LOAD]], [[SWITCH_LOOKUP]] ]
; CHECK-NEXT:    ret i32 [[R]]
;
entry:
  switch i3 %0, label %l6 [
  i3 -3, label %l5
  i3 -4, label %l5
  i3 3, label %l1
  i3 2, label %l1
  ]

l1: br label %l2

l2:
  %x = phi i32 [ 1, %l1 ], [ 2, %l5 ]
  br label %l6

l5: br label %l2

l6:
  %r = phi i32 [ %x, %l2 ], [ 0, %entry ]
  ret i32 %r
}

; Speculation depth must be limited to avoid a zero-cost instruction cycle.

define i32 @PR26308(i1 %B, i64 %load) {
; CHECK-LABEL: @PR26308(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    br label [[CLEANUP4:%.*]]
; CHECK:       cleanup4:
; CHECK-NEXT:    br label [[CLEANUP4]]
;
entry:
  br label %while.body

while.body:
  br label %cleanup

cleanup:
  %cleanup.dest.slot.0 = phi i1 [ false, %while.body ]
  br i1 %cleanup.dest.slot.0, label %for.cond, label %cleanup4

for.cond:
  %e.0 = phi i64* [ undef, %cleanup ], [ %incdec.ptr, %for.cond2 ]
  %pi = ptrtoint i64* %e.0 to i64
  %incdec.ptr = getelementptr inbounds i64, i64* %e.0, i64 1
  br label %for.cond2

for.cond2:
  %storemerge = phi i64 [ %pi, %for.cond ], [ %load, %for.cond2 ]
  br i1 %B, label %for.cond2, label %for.cond

cleanup4:
  br label %while.body
}

declare void @throw(i1)

define void @wineh_test(i64 %val) personality i32 (...)* @__CxxFrameHandler3 {
; CHECK-LABEL: @wineh_test(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    invoke void @throw(i1 false)
; CHECK-NEXT:    to label [[UNREACHABLE:%.*]] unwind label [[CLEANUP1:%.*]]
; CHECK:       unreachable:
; CHECK-NEXT:    unreachable
; CHECK:       cleanup1:
; CHECK-NEXT:    [[CLEANUPPAD1:%.*]] = cleanuppad within none []
; CHECK-NEXT:    switch i64 [[VAL:%.*]], label [[CLEANUPDONE2:%.*]] [
; CHECK-NEXT:    i64 0, label [[CLEANUPDONE1:%.*]]
; CHECK-NEXT:    i64 1, label [[CLEANUPDONE1]]
; CHECK-NEXT:    i64 6, label [[CLEANUPDONE1]]
; CHECK-NEXT:    ]
; CHECK:       cleanupdone1:
; CHECK-NEXT:    cleanupret from [[CLEANUPPAD1]] unwind label [[CLEANUP2:%.*]]
; CHECK:       cleanupdone2:
; CHECK-NEXT:    cleanupret from [[CLEANUPPAD1]] unwind label [[CLEANUP2]]
; CHECK:       cleanup2:
; CHECK-NEXT:    [[PHI:%.*]] = phi i1 [ true, [[CLEANUPDONE1]] ], [ false, [[CLEANUPDONE2]] ]
; CHECK-NEXT:    [[CLEANUPPAD2:%.*]] = cleanuppad within none []
; CHECK-NEXT:    call void @throw(i1 [[PHI]]) [ "funclet"(token [[CLEANUPPAD2]]) ]
; CHECK-NEXT:    unreachable
;
entry:
  invoke void @throw(i1 false)
  to label %unreachable unwind label %cleanup1

unreachable:
  unreachable

cleanup1:
  %cleanuppad1 = cleanuppad within none []
  switch i64 %val, label %cleanupdone2 [
  i64 0, label %cleanupdone1
  i64 1, label %cleanupdone1
  i64 6, label %cleanupdone1
  ]

cleanupdone1:
  cleanupret from %cleanuppad1 unwind label %cleanup2

cleanupdone2:
  cleanupret from %cleanuppad1 unwind label %cleanup2

cleanup2:
  %phi = phi i1 [ true, %cleanupdone1 ], [ false, %cleanupdone2 ]
  %cleanuppad2 = cleanuppad within none []
  call void @throw(i1 %phi) [ "funclet"(token %cleanuppad2) ]
  unreachable
}

declare i32 @__CxxFrameHandler3(...)