; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
; RUN: opt < %s -instcombine -S | FileCheck %s

define i32 @select_0_or_1_from_bool(i1 %x) {
; CHECK-LABEL: @select_0_or_1_from_bool(
; CHECK-NEXT:    [[NOT_X:%.*]] = xor i1 [[X:%.*]], true
; CHECK-NEXT:    [[ADD:%.*]] = zext i1 [[NOT_X]] to i32
; CHECK-NEXT:    ret i32 [[ADD]]
;
  %ext = sext i1 %x to i32
  %add = add i32 %ext, 1
  ret i32 %add
}

define <2 x i32> @select_0_or_1_from_bool_vec(<2 x i1> %x) {
; CHECK-LABEL: @select_0_or_1_from_bool_vec(
; CHECK-NEXT:    [[NOT_X:%.*]] = xor <2 x i1> [[X:%.*]], <i1 true, i1 true>
; CHECK-NEXT:    [[ADD:%.*]] = zext <2 x i1> [[NOT_X]] to <2 x i32>
; CHECK-NEXT:    ret <2 x i32> [[ADD]]
;
  %ext = sext <2 x i1> %x to <2 x i32>
  %add = add <2 x i32> %ext, <i32 1, i32 1>
  ret <2 x i32> %add
}

define i32 @select_C_minus_1_or_C_from_bool(i1 %x) {
; CHECK-LABEL: @select_C_minus_1_or_C_from_bool(
; CHECK-NEXT:    [[ADD:%.*]] = select i1 [[X:%.*]], i32 41, i32 42
; CHECK-NEXT:    ret i32 [[ADD]]
;
  %ext = sext i1 %x to i32
  %add = add i32 %ext, 42
  ret i32 %add
}

define <2 x i32> @select_C_minus_1_or_C_from_bool_vec(<2 x i1> %x) {
; CHECK-LABEL: @select_C_minus_1_or_C_from_bool_vec(
; CHECK-NEXT:    [[ADD:%.*]] = select <2 x i1> [[X:%.*]], <2 x i32> <i32 41, i32 42>, <2 x i32> <i32 42, i32 43>
; CHECK-NEXT:    ret <2 x i32> [[ADD]]
;
  %ext = sext <2 x i1> %x to <2 x i32>
  %add = add <2 x i32> %ext, <i32 42, i32 43>
  ret <2 x i32> %add
}

; This is an 'andn' of the low bit.

define i32 @flip_and_mask(i32 %x) {
; CHECK-LABEL: @flip_and_mask(
; CHECK-NEXT:    [[TMP1:%.*]] = and i32 [[X:%.*]], 1
; CHECK-NEXT:    [[INC:%.*]] = xor i32 [[TMP1]], 1
; CHECK-NEXT:    ret i32 [[INC]]
;
  %shl = shl i32 %x, 31
  %shr = ashr i32 %shl, 31
  %inc = add i32 %shr, 1
  ret i32 %inc
}

define <2 x i8> @flip_and_mask_splat(<2 x i8> %x) {
; CHECK-LABEL: @flip_and_mask_splat(
; CHECK-NEXT:    [[TMP1:%.*]] = and <2 x i8> [[X:%.*]], <i8 1, i8 1>
; CHECK-NEXT:    [[INC:%.*]] = xor <2 x i8> [[TMP1]], <i8 1, i8 1>
; CHECK-NEXT:    ret <2 x i8> [[INC]]
;
  %shl = shl <2 x i8> %x, <i8 7, i8 7>
  %shr = ashr <2 x i8> %shl, <i8 7, i8 7>
  %inc = add <2 x i8> %shr, <i8 1, i8 1>
  ret <2 x i8> %inc
}

define i32 @test1(i32 %A) {
; CHECK-LABEL: @test1(
; CHECK-NEXT:    ret i32 [[A:%.*]]
;
  %B = add i32 %A, 0
  ret i32 %B
}

define i32 @test2(i32 %A) {
; CHECK-LABEL: @test2(
; CHECK-NEXT:    ret i32 [[A:%.*]]
;
  %B = add i32 %A, 5
  %C = add i32 %B, -5
  ret i32 %C
}

define i32 @test3(i32 %A) {
; CHECK-LABEL: @test3(
; CHECK-NEXT:    ret i32 [[A:%.*]]
;
  %B = add i32 %A, 5
  %C = sub i32 %B, 5
  ret i32 %C
}

; D = B + -A = B - A
define i32 @test4(i32 %A, i32 %B) {
; CHECK-LABEL: @test4(
; CHECK-NEXT:    [[D:%.*]] = sub i32 [[B:%.*]], [[A:%.*]]
; CHECK-NEXT:    ret i32 [[D]]
;
  %C = sub i32 0, %A
  %D = add i32 %B, %C
  ret i32 %D
}

; D = -A + B = B - A
define i32 @test5(i32 %A, i32 %B) {
; CHECK-LABEL: @test5(
; CHECK-NEXT:    [[D:%.*]] = sub i32 [[B:%.*]], [[A:%.*]]
; CHECK-NEXT:    ret i32 [[D]]
;
  %C = sub i32 0, %A
  %D = add i32 %C, %B
  ret i32 %D
}

define <2 x i8> @neg_op0_vec_undef_elt(<2 x i8> %a, <2 x i8> %b) {
; CHECK-LABEL: @neg_op0_vec_undef_elt(
; CHECK-NEXT:    [[R:%.*]] = sub <2 x i8> [[B:%.*]], [[A:%.*]]
; CHECK-NEXT:    ret <2 x i8> [[R]]
;
  %nega = sub <2 x i8> <i8 0, i8 undef>, %a
  %r = add <2 x i8> %nega, %b
  ret <2 x i8> %r
}

define <2 x i8> @neg_neg_vec_undef_elt(<2 x i8> %a, <2 x i8> %b) {
; CHECK-LABEL: @neg_neg_vec_undef_elt(
; CHECK-NEXT:    [[TMP1:%.*]] = add <2 x i8> [[A:%.*]], [[B:%.*]]
; CHECK-NEXT:    [[R:%.*]] = sub <2 x i8> zeroinitializer, [[TMP1]]
; CHECK-NEXT:    ret <2 x i8> [[R]]
;
  %nega = sub <2 x i8> <i8 undef, i8 0>, %a
  %negb = sub <2 x i8> <i8 undef, i8 0>, %b
  %r = add <2 x i8> %nega, %negb
  ret <2 x i8> %r
}

; C = 7*A+A == 8*A == A << 3
define i32 @test6(i32 %A) {
; CHECK-LABEL: @test6(
; CHECK-NEXT:    [[C:%.*]] = shl i32 [[A:%.*]], 3
; CHECK-NEXT:    ret i32 [[C]]
;
  %B = mul i32 7, %A
  %C = add i32 %B, %A
  ret i32 %C
}

; C = A+7*A == 8*A == A << 3
define i32 @test7(i32 %A) {
; CHECK-LABEL: @test7(
; CHECK-NEXT:    [[C:%.*]] = shl i32 [[A:%.*]], 3
; CHECK-NEXT:    ret i32 [[C]]
;
  %B = mul i32 7, %A
  %C = add i32 %A, %B
  ret i32 %C
}

; (A & C1)+(B & C2) -> (A & C1)|(B & C2) iff C1&C2 == 0
define i32 @test8(i32 %A, i32 %B) {
; CHECK-LABEL: @test8(
; CHECK-NEXT:    [[A1:%.*]] = and i32 [[A:%.*]], 7
; CHECK-NEXT:    [[B1:%.*]] = and i32 [[B:%.*]], 128
; CHECK-NEXT:    [[C:%.*]] = or i32 [[A1]], [[B1]]
; CHECK-NEXT:    ret i32 [[C]]
;
  %A1 = and i32 %A, 7
  %B1 = and i32 %B, 128
  %C = add i32 %A1, %B1
  ret i32 %C
}

define i32 @test9(i32 %A) {
; CHECK-LABEL: @test9(
; CHECK-NEXT:    [[C:%.*]] = shl i32 [[A:%.*]], 5
; CHECK-NEXT:    ret i32 [[C]]
;
  %B = shl i32 %A, 4
  %C = add i32 %B, %B
  ret i32 %C
}

; a != -b
define i1 @test10(i8 %a, i8 %b) {
; CHECK-LABEL: @test10(
; CHECK-NEXT:    [[ADD:%.*]] = sub i8 0, [[B:%.*]]
; CHECK-NEXT:    [[C:%.*]] = icmp ne i8 [[ADD]], [[A:%.*]]
; CHECK-NEXT:    ret i1 [[C]]
;
  %add = add i8 %a, %b
  %c = icmp ne i8 %add, 0
  ret i1 %c
}

define <2 x i1> @test10vec(<2 x i8> %a, <2 x i8> %b) {
; CHECK-LABEL: @test10vec(
; CHECK-NEXT:    [[C:%.*]] = sub <2 x i8> zeroinitializer, [[B:%.*]]
; CHECK-NEXT:    [[D:%.*]] = icmp ne <2 x i8> [[C]], [[A:%.*]]
; CHECK-NEXT:    ret <2 x i1> [[D]]
;
  %c = add <2 x i8> %a, %b
  %d = icmp ne <2 x i8> %c, zeroinitializer
  ret <2 x i1> %d
}

define i1 @test11(i8 %A) {
; CHECK-LABEL: @test11(
; CHECK-NEXT:    [[C:%.*]] = icmp ne i8 [[A:%.*]], 1
; CHECK-NEXT:    ret i1 [[C]]
;
  %B = add i8 %A, -1
  %c = icmp ne i8 %B, 0
  ret i1 %c
}

define <2 x i1> @test11vec(<2 x i8> %a) {
; CHECK-LABEL: @test11vec(
; CHECK-NEXT:    [[C:%.*]] = icmp ne <2 x i8> [[A:%.*]], <i8 1, i8 1>
; CHECK-NEXT:    ret <2 x i1> [[C]]
;
  %b = add <2 x i8> %a, <i8 -1, i8 -1>
  %c = icmp ne <2 x i8> %b, zeroinitializer
  ret <2 x i1> %c
}

define i8 @reassoc_shl1(i8 %x, i8 %y) {
; CHECK-LABEL: @reassoc_shl1(
; CHECK-NEXT:    [[REASS_ADD:%.*]] = shl i8 [[X:%.*]], 1
; CHECK-NEXT:    [[R:%.*]] = add i8 [[REASS_ADD]], [[Y:%.*]]
; CHECK-NEXT:    ret i8 [[R]]
;
  %a = add i8 %y, %x
  %r = add i8 %a, %x
  ret i8 %r
}

define <2 x i8> @reassoc_shl1_commute1(<2 x i8> %x, <2 x i8> %y) {
; CHECK-LABEL: @reassoc_shl1_commute1(
; CHECK-NEXT:    [[REASS_ADD:%.*]] = shl <2 x i8> [[X:%.*]], <i8 1, i8 1>
; CHECK-NEXT:    [[R:%.*]] = add <2 x i8> [[REASS_ADD]], [[Y:%.*]]
; CHECK-NEXT:    ret <2 x i8> [[R]]
;
  %a = add <2 x i8> %x, %y
  %r = add <2 x i8> %a, %x
  ret <2 x i8> %r
}

define i8 @reassoc_shl1_commute2(i8 %px, i8 %py) {
; CHECK-LABEL: @reassoc_shl1_commute2(
; CHECK-NEXT:    [[X:%.*]] = sdiv i8 42, [[PX:%.*]]
; CHECK-NEXT:    [[Y:%.*]] = sdiv i8 43, [[PY:%.*]]
; CHECK-NEXT:    [[REASS_ADD:%.*]] = shl i8 [[X]], 1
; CHECK-NEXT:    [[R:%.*]] = add i8 [[Y]], [[REASS_ADD]]
; CHECK-NEXT:    ret i8 [[R]]
;
  %x = sdiv i8 42, %px ; thwart complexity-based canonicalization
  %y = sdiv i8 43, %py ; thwart complexity-based canonicalization
  %a = add i8 %y, %x
  %r = add i8 %x, %a
  ret i8 %r
}

define i8 @reassoc_shl1_commute3(i8 %px, i8 %py) {
; CHECK-LABEL: @reassoc_shl1_commute3(
; CHECK-NEXT:    [[X:%.*]] = sdiv i8 42, [[PX:%.*]]
; CHECK-NEXT:    [[Y:%.*]] = sdiv i8 43, [[PY:%.*]]
; CHECK-NEXT:    [[REASS_ADD:%.*]] = shl i8 [[X]], 1
; CHECK-NEXT:    [[R:%.*]] = add i8 [[Y]], [[REASS_ADD]]
; CHECK-NEXT:    ret i8 [[R]]
;
  %x = sdiv i8 42, %px ; thwart complexity-based canonicalization
  %y = sdiv i8 43, %py ; thwart complexity-based canonicalization
  %a = add i8 %x, %y
  %r = add i8 %x, %a
  ret i8 %r
}

declare void @use(i8)

define i8 @reassoc_shl1_extra_use(i8 %x, i8 %y) {
; CHECK-LABEL: @reassoc_shl1_extra_use(
; CHECK-NEXT:    [[A:%.*]] = add i8 [[Y:%.*]], [[X:%.*]]
; CHECK-NEXT:    call void @use(i8 [[A]])
; CHECK-NEXT:    [[R:%.*]] = add i8 [[A]], [[X]]
; CHECK-NEXT:    ret i8 [[R]]
;
  %a = add i8 %y, %x
  call void @use(i8 %a)
  %r = add i8 %a, %x
  ret i8 %r
}

;; TODO: shl A, 1?
define i32 @test13(i32 %A, i32 %B, i32 %C) {
; CHECK-LABEL: @test13(
; CHECK-NEXT:    [[D_OK:%.*]] = add i32 [[A:%.*]], [[B:%.*]]
; CHECK-NEXT:    [[E_OK:%.*]] = add i32 [[D_OK]], [[C:%.*]]
; CHECK-NEXT:    [[F:%.*]] = add i32 [[E_OK]], [[A]]
; CHECK-NEXT:    ret i32 [[F]]
;
  %D_OK = add i32 %A, %B
  %E_OK = add i32 %D_OK, %C
  %F = add i32 %E_OK, %A
  ret i32 %F
}

define i32 @test14(i32 %offset, i32 %difference) {
; CHECK-LABEL: @test14(
; CHECK-NEXT:    [[TMP_2:%.*]] = and i32 [[DIFFERENCE:%.*]], 3
; CHECK-NEXT:    [[TMP_3_OK:%.*]] = add i32 [[TMP_2]], [[OFFSET:%.*]]
; CHECK-NEXT:    [[TMP_5_MASK:%.*]] = and i32 [[DIFFERENCE]], -4
; CHECK-NEXT:    [[TMP_8:%.*]] = add i32 [[TMP_3_OK]], [[TMP_5_MASK]]
; CHECK-NEXT:    ret i32 [[TMP_8]]
;
  %tmp.2 = and i32 %difference, 3
  %tmp.3_OK = add i32 %tmp.2, %offset
  %tmp.5.mask = and i32 %difference, -4
  ; == add %offset, %difference
  %tmp.8 = add i32 %tmp.3_OK, %tmp.5.mask
  ret i32 %tmp.8
}

; Only one bit set
define i8 @test15(i8 %A) {
; CHECK-LABEL: @test15(
; CHECK-NEXT:    [[C:%.*]] = and i8 [[A:%.*]], 16
; CHECK-NEXT:    ret i8 [[C]]
;
  %B = add i8 %A, -64
  %C = and i8 %B, 16
  ret i8 %C
}

define i32 @test17(i32 %A) {
; CHECK-LABEL: @test17(
; CHECK-NEXT:    [[C:%.*]] = sub i32 0, [[A:%.*]]
; CHECK-NEXT:    ret i32 [[C]]
;
  %B = xor i32 %A, -1
  %C = add i32 %B, 1
  ret i32 %C
}

define i8 @test18(i8 %A) {
; CHECK-LABEL: @test18(
; CHECK-NEXT:    [[C:%.*]] = sub i8 16, [[A:%.*]]
; CHECK-NEXT:    ret i8 [[C]]
;
  %B = xor i8 %A, -1
  %C = add i8 %B, 17
  ret i8 %C
}

define <2 x i64> @test18vec(<2 x i64> %A) {
; CHECK-LABEL: @test18vec(
; CHECK-NEXT:    [[ADD:%.*]] = sub <2 x i64> <i64 1, i64 2>, [[A:%.*]]
; CHECK-NEXT:    ret <2 x i64> [[ADD]]
;
  %xor = xor <2 x i64> %A, <i64 -1, i64 -1>
  %add = add <2 x i64> %xor, <i64 2, i64 3>
  ret <2 x i64> %add
}

define i32 @test19(i1 %C) {
; CHECK-LABEL: @test19(
; CHECK-NEXT:    [[V:%.*]] = select i1 [[C:%.*]], i32 1123, i32 133
; CHECK-NEXT:    ret i32 [[V]]
;
  %A = select i1 %C, i32 1000, i32 10
  %V = add i32 %A, 123
  ret i32 %V
}

define <2 x i32> @test19vec(i1 %C) {
; CHECK-LABEL: @test19vec(
; CHECK-NEXT:    [[V:%.*]] = select i1 [[C:%.*]], <2 x i32> <i32 1123, i32 1123>, <2 x i32> <i32 133, i32 133>
; CHECK-NEXT:    ret <2 x i32> [[V]]
;
  %A = select i1 %C, <2 x i32> <i32 1000, i32 1000>, <2 x i32> <i32 10, i32 10>
  %V = add <2 x i32> %A, <i32 123, i32 123>
  ret <2 x i32> %V
}

; This is an InstSimplify fold, but test it here to make sure that
; InstCombine does not prevent the fold.
; With NSW, add of sign bit -> or of sign bit.

define i32 @test20(i32 %x) {
; CHECK-LABEL: @test20(
; CHECK-NEXT:    ret i32 [[X:%.*]]
;
  %y = xor i32 %x, -2147483648
  %z = add nsw i32 %y, -2147483648
  ret i32 %z
}

define i32 @xor_sign_bit(i32 %x) {
; CHECK-LABEL: @xor_sign_bit(
; CHECK-NEXT:    [[ADD:%.*]] = add i32 [[X:%.*]], -2147483606
; CHECK-NEXT:    ret i32 [[ADD]]
;
  %xor = xor i32 %x, 2147483648
  %add = add i32 %xor, 42
  ret i32 %add
}

define <2 x i32> @xor_sign_bit_vec_splat(<2 x i32> %x) {
; CHECK-LABEL: @xor_sign_bit_vec_splat(
; CHECK-NEXT:    [[ADD:%.*]] = add <2 x i32> [[X:%.*]], <i32 -2147483606, i32 -2147483606>
; CHECK-NEXT:    ret <2 x i32> [[ADD]]
;
  %xor = xor <2 x i32> %x, <i32 2147483648, i32 2147483648>
  %add = add <2 x i32> %xor, <i32 42, i32 42>
  ret <2 x i32> %add
}

; No-wrap info allows converting the add to 'or'.

define i8 @add_nsw_signbit(i8 %x) {
; CHECK-LABEL: @add_nsw_signbit(
; CHECK-NEXT:    [[Y:%.*]] = or i8 [[X:%.*]], -128
; CHECK-NEXT:    ret i8 [[Y]]
;
  %y = add nsw i8 %x, -128
  ret i8 %y
}

; No-wrap info allows converting the add to 'or'.

define i8 @add_nuw_signbit(i8 %x) {
; CHECK-LABEL: @add_nuw_signbit(
; CHECK-NEXT:    [[Y:%.*]] = or i8 [[X:%.*]], -128
; CHECK-NEXT:    ret i8 [[Y]]
;
  %y = add nuw i8 %x, 128
  ret i8 %y
}

define i32 @add_nsw_sext_add(i8 %x) {
; CHECK-LABEL: @add_nsw_sext_add(
; CHECK-NEXT:    [[TMP1:%.*]] = sext i8 [[X:%.*]] to i32
; CHECK-NEXT:    [[R:%.*]] = add nsw i32 [[TMP1]], 398
; CHECK-NEXT:    ret i32 [[R]]
;
  %add = add nsw i8 %x, 42
  %ext = sext i8 %add to i32
  %r = add i32 %ext, 356
  ret i32 %r
}

; Negative test - extra use of the sext means increase of instructions.

define i32 @add_nsw_sext_add_extra_use_1(i8 %x, i32* %p) {
; CHECK-LABEL: @add_nsw_sext_add_extra_use_1(
; CHECK-NEXT:    [[ADD:%.*]] = add nsw i8 [[X:%.*]], 42
; CHECK-NEXT:    [[EXT:%.*]] = sext i8 [[ADD]] to i32
; CHECK-NEXT:    store i32 [[EXT]], i32* [[P:%.*]], align 4
; CHECK-NEXT:    [[R:%.*]] = add nsw i32 [[EXT]], 356
; CHECK-NEXT:    ret i32 [[R]]
;
  %add = add nsw i8 %x, 42
  %ext = sext i8 %add to i32
  store i32 %ext, i32* %p
  %r = add i32 %ext, 356
  ret i32 %r
}

define <2 x i32> @add_nsw_sext_add_vec_extra_use_2(<2 x i8> %x, <2 x i8>* %p) {
; CHECK-LABEL: @add_nsw_sext_add_vec_extra_use_2(
; CHECK-NEXT:    [[ADD:%.*]] = add nsw <2 x i8> [[X:%.*]], <i8 42, i8 -5>
; CHECK-NEXT:    store <2 x i8> [[ADD]], <2 x i8>* [[P:%.*]], align 2
; CHECK-NEXT:    [[TMP1:%.*]] = sext <2 x i8> [[X]] to <2 x i32>
; CHECK-NEXT:    [[R:%.*]] = add nsw <2 x i32> [[TMP1]], <i32 398, i32 7>
; CHECK-NEXT:    ret <2 x i32> [[R]]
;
  %add = add nsw <2 x i8> %x, <i8 42, i8 -5>
  store <2 x i8> %add, <2 x i8>* %p
  %ext = sext <2 x i8> %add to <2 x i32>
  %r = add <2 x i32> %ext, <i32 356, i32 12>
  ret <2 x i32> %r
}

define <2 x i32> @add_nuw_zext_add_vec(<2 x i16> %x) {
; CHECK-LABEL: @add_nuw_zext_add_vec(
; CHECK-NEXT:    [[TMP1:%.*]] = zext <2 x i16> [[X:%.*]] to <2 x i32>
; CHECK-NEXT:    [[R:%.*]] = add nsw <2 x i32> [[TMP1]], <i32 65850, i32 -7>
; CHECK-NEXT:    ret <2 x i32> [[R]]
;
  %add = add nuw <2 x i16> %x, <i16 -42, i16 5>
  %ext = zext <2 x i16> %add to <2 x i32>
  %r = add <2 x i32> %ext, <i32 356, i32 -12>
  ret <2 x i32> %r
}

; Negative test - extra use of the zext means increase of instructions.

define i64 @add_nuw_zext_add_extra_use_1(i8 %x, i64* %p) {
; CHECK-LABEL: @add_nuw_zext_add_extra_use_1(
; CHECK-NEXT:    [[ADD:%.*]] = add nuw i8 [[X:%.*]], 42
; CHECK-NEXT:    [[EXT:%.*]] = zext i8 [[ADD]] to i64
; CHECK-NEXT:    store i64 [[EXT]], i64* [[P:%.*]], align 4
; CHECK-NEXT:    [[R:%.*]] = add nuw nsw i64 [[EXT]], 356
; CHECK-NEXT:    ret i64 [[R]]
;
  %add = add nuw i8 %x, 42
  %ext = zext i8 %add to i64
  store i64 %ext, i64* %p
  %r = add i64 %ext, 356
  ret i64 %r
}

define i64 @add_nuw_zext_add_extra_use_2(i8 %x, i8* %p) {
; CHECK-LABEL: @add_nuw_zext_add_extra_use_2(
; CHECK-NEXT:    [[ADD:%.*]] = add nuw i8 [[X:%.*]], 42
; CHECK-NEXT:    store i8 [[ADD]], i8* [[P:%.*]], align 1
; CHECK-NEXT:    [[TMP1:%.*]] = zext i8 [[X]] to i64
; CHECK-NEXT:    [[R:%.*]] = add nuw nsw i64 [[TMP1]], -314
; CHECK-NEXT:    ret i64 [[R]]
;
  %add = add nuw i8 %x, 42
  store i8 %add, i8* %p
  %ext = zext i8 %add to i64
  %r = add i64 %ext, -356
  ret i64 %r
}

define i1 @test21(i32 %x) {
; CHECK-LABEL: @test21(
; CHECK-NEXT:    [[Y:%.*]] = icmp eq i32 [[X:%.*]], 119
; CHECK-NEXT:    ret i1 [[Y]]
;
  %t = add i32 %x, 4
  %y = icmp eq i32 %t, 123
  ret i1 %y
}

define <2 x i1> @test21vec(<2 x i32> %x) {
; CHECK-LABEL: @test21vec(
; CHECK-NEXT:    [[Y:%.*]] = icmp eq <2 x i32> [[X:%.*]], <i32 119, i32 119>
; CHECK-NEXT:    ret <2 x i1> [[Y]]
;
  %t = add <2 x i32> %x, <i32 4, i32 4>
  %y = icmp eq <2 x i32> %t, <i32 123, i32 123>
  ret <2 x i1> %y
}

define i32 @test22(i32 %V) {
; CHECK-LABEL: @test22(
; CHECK-NEXT:    switch i32 [[V:%.*]], label [[DEFAULT:%.*]] [
; CHECK-NEXT:    i32 10, label [[LAB1:%.*]]
; CHECK-NEXT:    i32 20, label [[LAB2:%.*]]
; CHECK-NEXT:    ]
; CHECK:       Default:
; CHECK-NEXT:    ret i32 123
; CHECK:       Lab1:
; CHECK-NEXT:    ret i32 12312
; CHECK:       Lab2:
; CHECK-NEXT:    ret i32 1231231
;
  %V2 = add i32 %V, 10
  switch i32 %V2, label %Default [
  i32 20, label %Lab1
  i32 30, label %Lab2
  ]

Default:                ; preds = %0
  ret i32 123

Lab1:           ; preds = %0
  ret i32 12312

Lab2:           ; preds = %0
  ret i32 1231231
}

define i32 @test23(i1 %C, i32 %a) {
; CHECK-LABEL: @test23(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    br i1 [[C:%.*]], label [[ENDIF:%.*]], label [[ELSE:%.*]]
; CHECK:       else:
; CHECK-NEXT:    br label [[ENDIF]]
; CHECK:       endif:
; CHECK-NEXT:    [[B_0:%.*]] = phi i32 [ 1, [[ENTRY:%.*]] ], [ 2, [[ELSE]] ]
; CHECK-NEXT:    ret i32 [[B_0]]
;
entry:
  br i1 %C, label %endif, label %else

else:           ; preds = %entry
  br label %endif

endif:          ; preds = %else, %entry
  %b.0 = phi i32 [ 0, %entry ], [ 1, %else ]
  %tmp.4 = add i32 %b.0, 1
  ret i32 %tmp.4
}

define i32 @test24(i32 %A) {
; CHECK-LABEL: @test24(
; CHECK-NEXT:    [[B:%.*]] = shl i32 [[A:%.*]], 1
; CHECK-NEXT:    ret i32 [[B]]
;
  %B = add i32 %A, 1
  %C = shl i32 %B, 1
  %D = sub i32 %C, 2
  ret i32 %D
}

define i64 @test25(i64 %Y) {
; CHECK-LABEL: @test25(
; CHECK-NEXT:    [[TMP_8:%.*]] = shl i64 [[Y:%.*]], 3
; CHECK-NEXT:    ret i64 [[TMP_8]]
;
  %tmp.4 = shl i64 %Y, 2
  %tmp.12 = shl i64 %Y, 2
  %tmp.8 = add i64 %tmp.4, %tmp.12
  ret i64 %tmp.8
}

define i32 @test26(i32 %A, i32 %B) {
; CHECK-LABEL: @test26(
; CHECK-NEXT:    ret i32 [[A:%.*]]
;
  %C = add i32 %A, %B
  %D = sub i32 %C, %B
  ret i32 %D
}

; Fold add through select.
define i32 @test27(i1 %C, i32 %X, i32 %Y) {
; CHECK-LABEL: @test27(
; CHECK-NEXT:    [[C_UPGRD_1_V:%.*]] = select i1 [[C:%.*]], i32 [[X:%.*]], i32 123
; CHECK-NEXT:    ret i32 [[C_UPGRD_1_V]]
;
  %A = add i32 %X, %Y
  %B = add i32 %Y, 123
  %C.upgrd.1 = select i1 %C, i32 %A, i32 %B
  %D = sub i32 %C.upgrd.1, %Y
  ret i32 %D
}

define i32 @test28(i32 %X) {
; CHECK-LABEL: @test28(
; CHECK-NEXT:    [[Z:%.*]] = sub i32 -1192, [[X:%.*]]
; CHECK-NEXT:    ret i32 [[Z]]
;
  %Y = add i32 %X, 1234
  %Z = sub i32 42, %Y
  ret i32 %Z
}

define i32 @test29(i32 %x, i32 %y) {
; CHECK-LABEL: @test29(
; CHECK-NEXT:    [[TMP_2:%.*]] = sub i32 [[X:%.*]], [[Y:%.*]]
; CHECK-NEXT:    [[TMP_7:%.*]] = and i32 [[X]], 63
; CHECK-NEXT:    [[TMP_9:%.*]] = and i32 [[TMP_2]], -64
; CHECK-NEXT:    [[TMP_10:%.*]] = or i32 [[TMP_7]], [[TMP_9]]
; CHECK-NEXT:    ret i32 [[TMP_10]]
;
  %tmp.2 = sub i32 %x, %y
  %tmp.2.mask = and i32 %tmp.2, 63
  %tmp.6 = add i32 %tmp.2.mask, %y
  %tmp.7 = and i32 %tmp.6, 63
  %tmp.9 = and i32 %tmp.2, -64
  %tmp.10 = or i32 %tmp.7, %tmp.9
  ret i32 %tmp.10
}

; Add of sign bit -> xor of sign bit.
define i64 @test30(i64 %x) {
; CHECK-LABEL: @test30(
; CHECK-NEXT:    ret i64 [[X:%.*]]
;
  %tmp.2 = xor i64 %x, -9223372036854775808
  %tmp.4 = add i64 %tmp.2, -9223372036854775808
  ret i64 %tmp.4
}

define i32 @test31(i32 %A) {
; CHECK-LABEL: @test31(
; CHECK-NEXT:    [[TMP1:%.*]] = mul i32 [[A:%.*]], 5
; CHECK-NEXT:    ret i32 [[TMP1]]
;
  %B = add i32 %A, 4
  %C = mul i32 %B, 5
  %D = sub i32 %C, 20
  ret i32 %D
}

define i32 @test32(i32 %A) {
; CHECK-LABEL: @test32(
; CHECK-NEXT:    [[B:%.*]] = shl i32 [[A:%.*]], 2
; CHECK-NEXT:    ret i32 [[B]]
;
  %B = add i32 %A, 4
  %C = shl i32 %B, 2
  %D = sub i32 %C, 16
  ret i32 %D
}

define i8 @test33(i8 %A) {
; CHECK-LABEL: @test33(
; CHECK-NEXT:    [[C:%.*]] = or i8 [[A:%.*]], 1
; CHECK-NEXT:    ret i8 [[C]]
;
  %B = and i8 %A, -2
  %C = add i8 %B, 1
  ret i8 %C
}

define i8 @test34(i8 %A) {
; CHECK-LABEL: @test34(
; CHECK-NEXT:    [[C:%.*]] = and i8 [[A:%.*]], 12
; CHECK-NEXT:    ret i8 [[C]]
;
  %B = add i8 %A, 64
  %C = and i8 %B, 12
  ret i8 %C
}

; If all bits affected by the add are included
; in the mask, do the add before the mask op.

define i8 @masked_add(i8 %x) {
; CHECK-LABEL: @masked_add(
; CHECK-NEXT:    [[TMP1:%.*]] = add i8 [[X:%.*]], 96
; CHECK-NEXT:    [[R:%.*]] = and i8 [[TMP1]], -16
; CHECK-NEXT:    ret i8 [[R]]
;
  %and = and i8 %x, 240 ; 0xf0
  %r = add i8 %and, 96  ; 0x60
  ret i8 %r
}

define <2 x i8> @masked_add_splat(<2 x i8> %x) {
; CHECK-LABEL: @masked_add_splat(
; CHECK-NEXT:    [[TMP1:%.*]] = add <2 x i8> [[X:%.*]], <i8 64, i8 64>
; CHECK-NEXT:    [[R:%.*]] = and <2 x i8> [[TMP1]], <i8 -64, i8 -64>
; CHECK-NEXT:    ret <2 x i8> [[R]]
;
  %and = and <2 x i8> %x, <i8 192, i8 192> ; 0xc0
  %r = add <2 x i8> %and, <i8 64, i8 64>  ; 0x40
  ret <2 x i8> %r
}

define i8 @not_masked_add(i8 %x) {
; CHECK-LABEL: @not_masked_add(
; CHECK-NEXT:    [[AND:%.*]] = and i8 [[X:%.*]], 112
; CHECK-NEXT:    [[R:%.*]] = add nuw i8 [[AND]], 96
; CHECK-NEXT:    ret i8 [[R]]
;
  %and = and i8 %x, 112 ; 0x70
  %r = add i8 %and, 96  ; 0x60
  ret i8 %r
}

define i32 @test35(i32 %a) {
; CHECK-LABEL: @test35(
; CHECK-NEXT:    ret i32 -1
;
  %tmpnot = xor i32 %a, -1
  %tmp2 = add i32 %tmpnot, %a
  ret i32 %tmp2
}

define i32 @test36(i32 %a) {
; CHECK-LABEL: @test36(
; CHECK-NEXT:    ret i32 0
;
  %x = and i32 %a, -2
  %y = and i32 %a, -126
  %z = add i32 %x, %y
  %q = and i32 %z, 1  ; always zero
  ret i32 %q
}

define i1 @test37(i32 %a, i32 %b) {
; CHECK-LABEL: @test37(
; CHECK-NEXT:    [[CMP:%.*]] = icmp eq i32 [[B:%.*]], 0
; CHECK-NEXT:    ret i1 [[CMP]]
;
  %add = add i32 %a, %b
  %cmp = icmp eq i32 %add, %a
  ret i1 %cmp
}

define i1 @test38(i32 %a, i32 %b) {
; CHECK-LABEL: @test38(
; CHECK-NEXT:    [[CMP:%.*]] = icmp eq i32 [[A:%.*]], 0
; CHECK-NEXT:    ret i1 [[CMP]]
;
  %add = add i32 %a, %b
  %cmp = icmp eq i32 %add, %b
  ret i1 %cmp
}

define i1 @test39(i32 %a, i32 %b) {
; CHECK-LABEL: @test39(
; CHECK-NEXT:    [[CMP:%.*]] = icmp eq i32 [[B:%.*]], 0
; CHECK-NEXT:    ret i1 [[CMP]]
;
  %add = add i32 %b, %a
  %cmp = icmp eq i32 %add, %a
  ret i1 %cmp
}

define i1 @test40(i32 %a, i32 %b) {
; CHECK-LABEL: @test40(
; CHECK-NEXT:    [[CMP:%.*]] = icmp eq i32 [[A:%.*]], 0
; CHECK-NEXT:    ret i1 [[CMP]]
;
  %add = add i32 %b, %a
  %cmp = icmp eq i32 %add, %b
  ret i1 %cmp
}

; (add (zext (add nuw X, C2)), C) --> (zext (add nuw X, C2 + C))

define i64 @test41(i32 %a) {
; CHECK-LABEL: @test41(
; CHECK-NEXT:    [[TMP1:%.*]] = add nuw i32 [[A:%.*]], 15
; CHECK-NEXT:    [[SUB:%.*]] = zext i32 [[TMP1]] to i64
; CHECK-NEXT:    ret i64 [[SUB]]
;
  %add = add nuw i32 %a, 16
  %zext = zext i32 %add to i64
  %sub = add i64 %zext, -1
  ret i64 %sub
}

; (add (zext (add nuw X, C2)), C) --> (zext (add nuw X, C2 + C))

define <2 x i64> @test41vec(<2 x i32> %a) {
; CHECK-LABEL: @test41vec(
; CHECK-NEXT:    [[TMP1:%.*]] = add nuw <2 x i32> [[A:%.*]], <i32 15, i32 15>
; CHECK-NEXT:    [[SUB:%.*]] = zext <2 x i32> [[TMP1]] to <2 x i64>
; CHECK-NEXT:    ret <2 x i64> [[SUB]]
;
  %add = add nuw <2 x i32> %a, <i32 16, i32 16>
  %zext = zext <2 x i32> %add to <2 x i64>
  %sub = add <2 x i64> %zext, <i64 -1, i64 -1>
  ret <2 x i64> %sub
}

define <2 x i64> @test41vec_and_multiuse(<2 x i32> %a) {
; CHECK-LABEL: @test41vec_and_multiuse(
; CHECK-NEXT:    [[ADD:%.*]] = add nuw <2 x i32> [[A:%.*]], <i32 16, i32 16>
; CHECK-NEXT:    [[ZEXT:%.*]] = zext <2 x i32> [[ADD]] to <2 x i64>
; CHECK-NEXT:    [[REASS_ADD:%.*]] = shl nuw nsw <2 x i64> [[ZEXT]], <i64 1, i64 1>
; CHECK-NEXT:    [[EXTRAUSE:%.*]] = add nsw <2 x i64> [[REASS_ADD]], <i64 -1, i64 -1>
; CHECK-NEXT:    ret <2 x i64> [[EXTRAUSE]]
;
  %add = add nuw <2 x i32> %a, <i32 16, i32 16>
  %zext = zext <2 x i32> %add to <2 x i64>
  %sub = add <2 x i64> %zext, <i64 -1, i64 -1>
  %extrause = add <2 x i64> %zext, %sub
  ret <2 x i64> %extrause
}

define i32 @test42(i1 %C) {
; CHECK-LABEL: @test42(
; CHECK-NEXT:    [[V:%.*]] = select i1 [[C:%.*]], i32 1123, i32 133
; CHECK-NEXT:    ret i32 [[V]]
;
  %A = select i1 %C, i32 1000, i32 10
  %V = add i32 123, %A
  ret i32 %V
}

define <2 x i32> @test42vec(i1 %C) {
; CHECK-LABEL: @test42vec(
; CHECK-NEXT:    [[V:%.*]] = select i1 [[C:%.*]], <2 x i32> <i32 1123, i32 1123>, <2 x i32> <i32 133, i32 133>
; CHECK-NEXT:    ret <2 x i32> [[V]]
;
  %A = select i1 %C, <2 x i32> <i32 1000, i32 1000>, <2 x i32> <i32 10, i32 10>
  %V = add <2 x i32> <i32 123, i32 123>, %A
  ret <2 x i32> %V
}

define <2 x i32> @test42vec2(i1 %C) {
; CHECK-LABEL: @test42vec2(
; CHECK-NEXT:    [[V:%.*]] = select i1 [[C:%.*]], <2 x i32> <i32 1123, i32 2833>, <2 x i32> <i32 133, i32 363>
; CHECK-NEXT:    ret <2 x i32> [[V]]
;
  %A = select i1 %C, <2 x i32> <i32 1000, i32 2500>, <2 x i32> <i32 10, i32 30>
  %V = add <2 x i32> <i32 123, i32 333>, %A
  ret <2 x i32> %V
}

define i32 @test55(i1 %which) {
; CHECK-LABEL: @test55(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    br i1 [[WHICH:%.*]], label [[FINAL:%.*]], label [[DELAY:%.*]]
; CHECK:       delay:
; CHECK-NEXT:    br label [[FINAL]]
; CHECK:       final:
; CHECK-NEXT:    [[A:%.*]] = phi i32 [ 1123, [[ENTRY:%.*]] ], [ 133, [[DELAY]] ]
; CHECK-NEXT:    ret i32 [[A]]
;
entry:
  br i1 %which, label %final, label %delay

delay:
  br label %final

final:
  %A = phi i32 [ 1000, %entry ], [ 10, %delay ]
  %value = add i32 123, %A
  ret i32 %value
}

define <2 x i32> @test43vec(i1 %which) {
; CHECK-LABEL: @test43vec(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    br i1 [[WHICH:%.*]], label [[FINAL:%.*]], label [[DELAY:%.*]]
; CHECK:       delay:
; CHECK-NEXT:    br label [[FINAL]]
; CHECK:       final:
; CHECK-NEXT:    [[A:%.*]] = phi <2 x i32> [ <i32 1123, i32 1123>, [[ENTRY:%.*]] ], [ <i32 133, i32 133>, [[DELAY]] ]
; CHECK-NEXT:    ret <2 x i32> [[A]]
;
entry:
  br i1 %which, label %final, label %delay

delay:
  br label %final

final:
  %A = phi <2 x i32> [ <i32 1000, i32 1000>, %entry ], [ <i32 10, i32 10>, %delay ]
  %value = add <2 x i32> <i32 123, i32 123>, %A
  ret <2 x i32> %value
}

define <2 x i32> @test43vec2(i1 %which) {
; CHECK-LABEL: @test43vec2(
; CHECK-NEXT:  entry:
; CHECK-NEXT:    br i1 [[WHICH:%.*]], label [[FINAL:%.*]], label [[DELAY:%.*]]
; CHECK:       delay:
; CHECK-NEXT:    br label [[FINAL]]
; CHECK:       final:
; CHECK-NEXT:    [[A:%.*]] = phi <2 x i32> [ <i32 1123, i32 2833>, [[ENTRY:%.*]] ], [ <i32 133, i32 363>, [[DELAY]] ]
; CHECK-NEXT:    ret <2 x i32> [[A]]
;
entry:
  br i1 %which, label %final, label %delay

delay:
  br label %final

final:
  %A = phi <2 x i32> [ <i32 1000, i32 2500>, %entry ], [ <i32 10, i32 30>, %delay ]
  %value = add <2 x i32> <i32 123, i32 333>, %A
  ret <2 x i32> %value
}

; E = (A + 1) + ~B = A - B
define i32 @add_not_increment(i32 %A, i32 %B) {
; CHECK-LABEL: @add_not_increment(
; CHECK-NEXT:    [[E:%.*]] = sub i32 [[A:%.*]], [[B:%.*]]
; CHECK-NEXT:    ret i32 [[E]]
;
  %C = xor i32 %B, -1
  %D = add i32 %A, 1
  %E = add i32 %D, %C
  ret i32 %E
}

; E = (A + 1) + ~B = A - B
define <2 x i32> @add_not_increment_vec(<2 x i32> %A, <2 x i32> %B) {
; CHECK-LABEL: @add_not_increment_vec(
; CHECK-NEXT:    [[E:%.*]] = sub <2 x i32> [[A:%.*]], [[B:%.*]]
; CHECK-NEXT:    ret <2 x i32> [[E]]
;
  %C = xor <2 x i32> %B, <i32 -1, i32 -1>
  %D = add <2 x i32> %A, <i32 1, i32 1>
  %E = add <2 x i32> %D, %C
  ret <2 x i32> %E
}

; E = ~B + (1 + A) = A - B
define i32 @add_not_increment_commuted(i32 %A, i32 %B) {
; CHECK-LABEL: @add_not_increment_commuted(
; CHECK-NEXT:    [[E:%.*]] = sub i32 [[A:%.*]], [[B:%.*]]
; CHECK-NEXT:    ret i32 [[E]]
;
  %C = xor i32 %B, -1
  %D = add i32 %A, 1
  %E = add i32 %C, %D
  ret i32 %E
}

; E = (A + ~B) + 1 = A - B
define i32 @add_to_sub(i32 %M, i32 %B) {
; CHECK-LABEL: @add_to_sub(
; CHECK-NEXT:    [[A:%.*]] = mul i32 [[M:%.*]], 42
; CHECK-NEXT:    [[E:%.*]] = sub i32 [[A]], [[B:%.*]]
; CHECK-NEXT:    ret i32 [[E]]
;
  %A = mul i32 %M, 42          ; thwart complexity-based ordering
  %C = xor i32 %B, -1
  %D = add i32 %A, %C
  %E = add i32 %D, 1
  ret i32 %E
}

; E = (~B + A) + 1 = A - B
define i32 @add_to_sub2(i32 %A, i32 %M) {
; CHECK-LABEL: @add_to_sub2(
; CHECK-NEXT:    [[B_NEG:%.*]] = mul i32 [[M:%.*]], -42
; CHECK-NEXT:    [[E:%.*]] = add i32 [[B_NEG]], [[A:%.*]]
; CHECK-NEXT:    ret i32 [[E]]
;
  %B = mul i32 %M, 42          ; thwart complexity-based ordering
  %C = xor i32 %B, -1
  %D = add i32 %C, %A
  %E = add i32 %D, 1
  ret i32 %E
}

; (X | C1) + C2 --> (X | C1) ^ C1 iff (C1 == -C2)
define i32 @test44(i32 %A) {
; CHECK-LABEL: @test44(
; CHECK-NEXT:    [[TMP1:%.*]] = and i32 [[A:%.*]], -124
; CHECK-NEXT:    ret i32 [[TMP1]]
;
  %B = or i32 %A, 123
  %C = add i32 %B, -123
  ret i32 %C
}

define i32 @test44_extra_use(i32 %A) {
; CHECK-LABEL: @test44_extra_use(
; CHECK-NEXT:    [[B:%.*]] = or i32 [[A:%.*]], 123
; CHECK-NEXT:    [[TMP1:%.*]] = and i32 [[A]], -124
; CHECK-NEXT:    [[D:%.*]] = mul i32 [[B]], [[TMP1]]
; CHECK-NEXT:    ret i32 [[D]]
;
  %B = or i32 %A, 123
  %C = add i32 %B, -123
  %D = mul i32 %B, %C
  ret i32 %D
}

define i32 @test44_non_matching(i32 %A) {
; CHECK-LABEL: @test44_non_matching(
; CHECK-NEXT:    [[B:%.*]] = or i32 [[A:%.*]], 123
; CHECK-NEXT:    [[C:%.*]] = add i32 [[B]], -321
; CHECK-NEXT:    ret i32 [[C]]
;
  %B = or i32 %A, 123
  %C = add i32 %B, -321
  ret i32 %C
}

define <2 x i32> @test44_vec(<2 x i32> %A) {
; CHECK-LABEL: @test44_vec(
; CHECK-NEXT:    [[TMP1:%.*]] = and <2 x i32> [[A:%.*]], <i32 -124, i32 -124>
; CHECK-NEXT:    ret <2 x i32> [[TMP1]]
;
  %B = or <2 x i32> %A, <i32 123, i32 123>
  %C = add <2 x i32> %B, <i32 -123, i32 -123>
  ret <2 x i32> %C
}

define <2 x i32> @test44_vec_non_matching(<2 x i32> %A) {
; CHECK-LABEL: @test44_vec_non_matching(
; CHECK-NEXT:    [[B:%.*]] = or <2 x i32> [[A:%.*]], <i32 123, i32 123>
; CHECK-NEXT:    [[C:%.*]] = add <2 x i32> [[B]], <i32 -321, i32 -321>
; CHECK-NEXT:    ret <2 x i32> [[C]]
;
  %B = or <2 x i32> %A, <i32 123, i32 123>
  %C = add <2 x i32> %B, <i32 -321, i32 -321>
  ret <2 x i32> %C
}

define <2 x i32> @test44_vec_undef(<2 x i32> %A) {
; CHECK-LABEL: @test44_vec_undef(
; CHECK-NEXT:    [[B:%.*]] = or <2 x i32> [[A:%.*]], <i32 123, i32 undef>
; CHECK-NEXT:    [[C:%.*]] = add <2 x i32> [[B]], <i32 -123, i32 undef>
; CHECK-NEXT:    ret <2 x i32> [[C]]
;
  %B = or <2 x i32> %A, <i32 123, i32 undef>
  %C = add <2 x i32> %B, <i32 -123, i32 undef>
  ret <2 x i32> %C
}

define <2 x i32> @test44_vec_non_splat(<2 x i32> %A) {
; CHECK-LABEL: @test44_vec_non_splat(
; CHECK-NEXT:    [[B:%.*]] = or <2 x i32> [[A:%.*]], <i32 123, i32 456>
; CHECK-NEXT:    [[C:%.*]] = add <2 x i32> [[B]], <i32 -123, i32 -456>
; CHECK-NEXT:    ret <2 x i32> [[C]]
;
  %B = or <2 x i32> %A, <i32 123, i32 456>
  %C = add <2 x i32> %B, <i32 -123, i32 -456>
  ret <2 x i32> %C
}

define i32 @lshr_add(i1 %x, i1 %y) {
; CHECK-LABEL: @lshr_add(
; CHECK-NEXT:    [[TMP1:%.*]] = xor i1 [[X:%.*]], true
; CHECK-NEXT:    [[TMP2:%.*]] = and i1 [[TMP1]], [[Y:%.*]]
; CHECK-NEXT:    [[R:%.*]] = zext i1 [[TMP2]] to i32
; CHECK-NEXT:    ret i32 [[R]]
;
  %xz = zext i1 %x to i32
  %ys = sext i1 %y to i32
  %sub = add i32 %xz, %ys
  %r = lshr i32 %sub, 31
  ret i32 %r
}

define i5 @and_add(i1 %x, i1 %y) {
; CHECK-LABEL: @and_add(
; CHECK-NEXT:    [[TMP1:%.*]] = xor i1 [[X:%.*]], true
; CHECK-NEXT:    [[TMP2:%.*]] = and i1 [[TMP1]], [[Y:%.*]]
; CHECK-NEXT:    [[R:%.*]] = select i1 [[TMP2]], i5 -2, i5 0
; CHECK-NEXT:    ret i5 [[R]]
;
  %xz = zext i1 %x to i5
  %ys = sext i1 %y to i5
  %sub = add i5 %xz, %ys
  %r = and i5 %sub, 30
  ret i5 %r
}

define <2 x i8> @ashr_add_commute(<2 x i1> %x, <2 x i1> %y) {
; CHECK-LABEL: @ashr_add_commute(
; CHECK-NEXT:    [[TMP1:%.*]] = xor <2 x i1> [[X:%.*]], <i1 true, i1 true>
; CHECK-NEXT:    [[TMP2:%.*]] = and <2 x i1> [[TMP1]], [[Y:%.*]]
; CHECK-NEXT:    [[TMP3:%.*]] = sext <2 x i1> [[TMP2]] to <2 x i8>
; CHECK-NEXT:    ret <2 x i8> [[TMP3]]
;
  %xz = zext <2 x i1> %x to <2 x i8>
  %ys = sext <2 x i1> %y to <2 x i8>
  %sub = add nsw <2 x i8> %ys, %xz
  %r = ashr <2 x i8> %sub, <i8 1, i8 1>
  ret <2 x i8> %r
}

define i32 @cmp_math(i32 %x, i32 %y) {
; CHECK-LABEL: @cmp_math(
; CHECK-NEXT:    [[LT:%.*]] = icmp ult i32 [[X:%.*]], [[Y:%.*]]
; CHECK-NEXT:    [[R:%.*]] = zext i1 [[LT]] to i32
; CHECK-NEXT:    ret i32 [[R]]
;
  %gt = icmp ugt i32 %x, %y
  %lt = icmp ult i32 %x, %y
  %xz = zext i1 %gt to i32
  %yz = zext i1 %lt to i32
  %s = sub i32 %xz, %yz
  %r = lshr i32 %s, 31
  ret i32 %r
}

; Negative test - wrong type

define i32 @lshr_add_nonbool(i2 %x, i1 %y) {
; CHECK-LABEL: @lshr_add_nonbool(
; CHECK-NEXT:    [[XZ:%.*]] = zext i2 [[X:%.*]] to i32
; CHECK-NEXT:    [[YS:%.*]] = sext i1 [[Y:%.*]] to i32
; CHECK-NEXT:    [[SUB:%.*]] = add nsw i32 [[XZ]], [[YS]]
; CHECK-NEXT:    [[R:%.*]] = lshr i32 [[SUB]], 31
; CHECK-NEXT:    ret i32 [[R]]
;
  %xz = zext i2 %x to i32
  %ys = sext i1 %y to i32
  %sub = add i32 %xz, %ys
  %r = lshr i32 %sub, 31
  ret i32 %r
}

; Negative test - wrong demand

define i32 @and31_add(i1 %x, i1 %y) {
; CHECK-LABEL: @and31_add(
; CHECK-NEXT:    [[XZ:%.*]] = zext i1 [[X:%.*]] to i32
; CHECK-NEXT:    [[YS:%.*]] = sext i1 [[Y:%.*]] to i32
; CHECK-NEXT:    [[SUB:%.*]] = add nsw i32 [[XZ]], [[YS]]
; CHECK-NEXT:    [[R:%.*]] = and i32 [[SUB]], 31
; CHECK-NEXT:    ret i32 [[R]]
;
  %xz = zext i1 %x to i32
  %ys = sext i1 %y to i32
  %sub = add i32 %xz, %ys
  %r = and i32 %sub, 31
  ret i32 %r
}

; Negative test - extra use

define i32 @lshr_add_use(i1 %x, i1 %y, i32* %p) {
; CHECK-LABEL: @lshr_add_use(
; CHECK-NEXT:    [[XZ:%.*]] = zext i1 [[X:%.*]] to i32
; CHECK-NEXT:    store i32 [[XZ]], i32* [[P:%.*]], align 4
; CHECK-NEXT:    [[YS:%.*]] = sext i1 [[Y:%.*]] to i32
; CHECK-NEXT:    [[SUB:%.*]] = add nsw i32 [[XZ]], [[YS]]
; CHECK-NEXT:    [[R:%.*]] = lshr i32 [[SUB]], 31
; CHECK-NEXT:    ret i32 [[R]]
;
  %xz = zext i1 %x to i32
  store i32 %xz, i32* %p
  %ys = sext i1 %y to i32
  %sub = add i32 %xz, %ys
  %r = lshr i32 %sub, 31
  ret i32 %r
}

; Negative test - extra use

define i32 @lshr_add_use2(i1 %x, i1 %y, i32* %p) {
; CHECK-LABEL: @lshr_add_use2(
; CHECK-NEXT:    [[XZ:%.*]] = zext i1 [[X:%.*]] to i32
; CHECK-NEXT:    [[YS:%.*]] = sext i1 [[Y:%.*]] to i32
; CHECK-NEXT:    store i32 [[YS]], i32* [[P:%.*]], align 4
; CHECK-NEXT:    [[SUB:%.*]] = add nsw i32 [[XZ]], [[YS]]
; CHECK-NEXT:    [[R:%.*]] = lshr i32 [[SUB]], 31
; CHECK-NEXT:    ret i32 [[R]]
;
  %xz = zext i1 %x to i32
  %ys = sext i1 %y to i32
  store i32 %ys, i32* %p
  %sub = add i32 %xz, %ys
  %r = lshr i32 %sub, 31
  ret i32 %r
}

define i32 @lshr_add_sexts(i1 %x, i1 %y) {
; CHECK-LABEL: @lshr_add_sexts(
; CHECK-NEXT:    [[TMP1:%.*]] = or i1 [[X:%.*]], [[Y:%.*]]
; CHECK-NEXT:    [[R:%.*]] = zext i1 [[TMP1]] to i32
; CHECK-NEXT:    ret i32 [[R]]
;
  %xs = sext i1 %x to i32
  %ys = sext i1 %y to i32
  %sub = add i32 %xs, %ys
  %r = lshr i32 %sub, 31
  ret i32 %r
}

define i5 @and_add_sexts(i1 %x, i1 %y) {
; CHECK-LABEL: @and_add_sexts(
; CHECK-NEXT:    [[TMP1:%.*]] = or i1 [[X:%.*]], [[Y:%.*]]
; CHECK-NEXT:    [[R:%.*]] = select i1 [[TMP1]], i5 -2, i5 0
; CHECK-NEXT:    ret i5 [[R]]
;
  %xs = sext i1 %x to i5
  %ys = sext i1 %y to i5
  %sub = add i5 %xs, %ys
  %r = and i5 %sub, 30
  ret i5 %r
}

define <2 x i8> @ashr_add_sexts(<2 x i1> %x, <2 x i1> %y) {
; CHECK-LABEL: @ashr_add_sexts(
; CHECK-NEXT:    [[TMP1:%.*]] = or <2 x i1> [[Y:%.*]], [[X:%.*]]
; CHECK-NEXT:    [[TMP2:%.*]] = sext <2 x i1> [[TMP1]] to <2 x i8>
; CHECK-NEXT:    ret <2 x i8> [[TMP2]]
;
  %xs = sext <2 x i1> %x to <2 x i8>
  %ys = sext <2 x i1> %y to <2 x i8>
  %sub = add nsw <2 x i8> %ys, %xs
  %r = ashr <2 x i8> %sub, <i8 1, i8 1>
  ret <2 x i8> %r
}

define i32 @cmp_math_sexts(i32 %x, i32 %y) {
; CHECK-LABEL: @cmp_math_sexts(
; CHECK-NEXT:    [[TMP1:%.*]] = icmp ne i32 [[X:%.*]], [[Y:%.*]]
; CHECK-NEXT:    [[R:%.*]] = zext i1 [[TMP1]] to i32
; CHECK-NEXT:    ret i32 [[R]]
;
  %gt = icmp ugt i32 %x, %y
  %lt = icmp ult i32 %x, %y
  %xz = sext i1 %gt to i32
  %yz = zext i1 %lt to i32
  %s = sub i32 %xz, %yz
  %r = lshr i32 %s, 31
  ret i32 %r
}

; Negative test - wrong type

define i32 @lshr_add_nonbool_sexts(i2 %x, i1 %y) {
; CHECK-LABEL: @lshr_add_nonbool_sexts(
; CHECK-NEXT:    [[XS:%.*]] = sext i2 [[X:%.*]] to i32
; CHECK-NEXT:    [[YS:%.*]] = sext i1 [[Y:%.*]] to i32
; CHECK-NEXT:    [[SUB:%.*]] = add nsw i32 [[XS]], [[YS]]
; CHECK-NEXT:    [[R:%.*]] = lshr i32 [[SUB]], 31
; CHECK-NEXT:    ret i32 [[R]]
;
  %xs = sext i2 %x to i32
  %ys = sext i1 %y to i32
  %sub = add i32 %xs, %ys
  %r = lshr i32 %sub, 31
  ret i32 %r
}

; Negative test - wrong demand

define i32 @and31_add_sexts(i1 %x, i1 %y) {
; CHECK-LABEL: @and31_add_sexts(
; CHECK-NEXT:    [[XS:%.*]] = sext i1 [[X:%.*]] to i32
; CHECK-NEXT:    [[YS:%.*]] = sext i1 [[Y:%.*]] to i32
; CHECK-NEXT:    [[SUB:%.*]] = add nsw i32 [[XS]], [[YS]]
; CHECK-NEXT:    [[R:%.*]] = and i32 [[SUB]], 31
; CHECK-NEXT:    ret i32 [[R]]
;
  %xs = sext i1 %x to i32
  %ys = sext i1 %y to i32
  %sub = add i32 %xs, %ys
  %r = and i32 %sub, 31
  ret i32 %r
}

; Negative test - extra use

define i32 @lshr_add_use_sexts(i1 %x, i1 %y, i32* %p) {
; CHECK-LABEL: @lshr_add_use_sexts(
; CHECK-NEXT:    [[XS:%.*]] = sext i1 [[X:%.*]] to i32
; CHECK-NEXT:    store i32 [[XS]], i32* [[P:%.*]], align 4
; CHECK-NEXT:    [[YS:%.*]] = sext i1 [[Y:%.*]] to i32
; CHECK-NEXT:    [[SUB:%.*]] = add nsw i32 [[XS]], [[YS]]
; CHECK-NEXT:    [[R:%.*]] = lshr i32 [[SUB]], 31
; CHECK-NEXT:    ret i32 [[R]]
;
  %xs = sext i1 %x to i32
  store i32 %xs, i32* %p
  %ys = sext i1 %y to i32
  %sub = add i32 %xs, %ys
  %r = lshr i32 %sub, 31
  ret i32 %r
}

; Negative test - extra use

define i32 @lshr_add_use2_sexts(i1 %x, i1 %y, i32* %p) {
; CHECK-LABEL: @lshr_add_use2_sexts(
; CHECK-NEXT:    [[XS:%.*]] = sext i1 [[X:%.*]] to i32
; CHECK-NEXT:    [[YS:%.*]] = sext i1 [[Y:%.*]] to i32
; CHECK-NEXT:    store i32 [[YS]], i32* [[P:%.*]], align 4
; CHECK-NEXT:    [[SUB:%.*]] = add nsw i32 [[XS]], [[YS]]
; CHECK-NEXT:    [[R:%.*]] = lshr i32 [[SUB]], 31
; CHECK-NEXT:    ret i32 [[R]]
;
  %xs = sext i1 %x to i32
  %ys = sext i1 %y to i32
  store i32 %ys, i32* %p
  %sub = add i32 %xs, %ys
  %r = lshr i32 %sub, 31
  ret i32 %r
}