blob: ca64bbd7f3b310778058a3a404d699f5a84e0907 [file] [log] [blame]
// Copyright 2015 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package dwarf
import (
"errors"
"fmt"
"io"
"path"
)
// A LineReader reads a sequence of LineEntry structures from a DWARF
// "line" section for a single compilation unit. LineEntries occur in
// order of increasing PC and each LineEntry gives metadata for the
// instructions from that LineEntry's PC to just before the next
// LineEntry's PC. The last entry will have its EndSequence field set.
type LineReader struct {
buf buf
// Original .debug_line section data. Used by Seek.
section []byte
// Header information
version uint16
minInstructionLength int
maxOpsPerInstruction int
defaultIsStmt bool
lineBase int
lineRange int
opcodeBase int
opcodeLengths []int
directories []string
fileEntries []*LineFile
programOffset Offset // section offset of line number program
endOffset Offset // section offset of byte following program
initialFileEntries int // initial length of fileEntries
// Current line number program state machine registers
state LineEntry // public state
fileIndex int // private state
}
// A LineEntry is a row in a DWARF line table.
type LineEntry struct {
// Address is the program-counter value of a machine
// instruction generated by the compiler. This LineEntry
// applies to each instruction from Address to just before the
// Address of the next LineEntry.
Address uint64
// OpIndex is the index of an operation within a VLIW
// instruction. The index of the first operation is 0. For
// non-VLIW architectures, it will always be 0. Address and
// OpIndex together form an operation pointer that can
// reference any individual operation within the instruction
// stream.
OpIndex int
// File is the source file corresponding to these
// instructions.
File *LineFile
// Line is the source code line number corresponding to these
// instructions. Lines are numbered beginning at 1. It may be
// 0 if these instructions cannot be attributed to any source
// line.
Line int
// Column is the column number within the source line of these
// instructions. Columns are numbered beginning at 1. It may
// be 0 to indicate the "left edge" of the line.
Column int
// IsStmt indicates that Address is a recommended breakpoint
// location, such as the beginning of a line, statement, or a
// distinct subpart of a statement.
IsStmt bool
// BasicBlock indicates that Address is the beginning of a
// basic block.
BasicBlock bool
// PrologueEnd indicates that Address is one (of possibly
// many) PCs where execution should be suspended for a
// breakpoint on entry to the containing function.
//
// Added in DWARF 3.
PrologueEnd bool
// EpilogueBegin indicates that Address is one (of possibly
// many) PCs where execution should be suspended for a
// breakpoint on exit from this function.
//
// Added in DWARF 3.
EpilogueBegin bool
// ISA is the instruction set architecture for these
// instructions. Possible ISA values should be defined by the
// applicable ABI specification.
//
// Added in DWARF 3.
ISA int
// Discriminator is an arbitrary integer indicating the block
// to which these instructions belong. It serves to
// distinguish among multiple blocks that may all have with
// the same source file, line, and column. Where only one
// block exists for a given source position, it should be 0.
//
// Added in DWARF 3.
Discriminator int
// EndSequence indicates that Address is the first byte after
// the end of a sequence of target machine instructions. If it
// is set, only this and the Address field are meaningful. A
// line number table may contain information for multiple
// potentially disjoint instruction sequences. The last entry
// in a line table should always have EndSequence set.
EndSequence bool
}
// A LineFile is a source file referenced by a DWARF line table entry.
type LineFile struct {
Name string
Mtime uint64 // Implementation defined modification time, or 0 if unknown
Length int // File length, or 0 if unknown
}
// LineReader returns a new reader for the line table of compilation
// unit cu, which must be an Entry with tag TagCompileUnit.
//
// If this compilation unit has no line table, it returns nil, nil.
func (d *Data) LineReader(cu *Entry) (*LineReader, error) {
if d.line == nil {
// No line tables available.
return nil, nil
}
// Get line table information from cu.
off, ok := cu.Val(AttrStmtList).(int64)
if !ok {
// cu has no line table.
return nil, nil
}
if off > int64(len(d.line)) {
return nil, errors.New("AttrStmtList value out of range")
}
// AttrCompDir is optional if all file names are absolute. Use
// the empty string if it's not present.
compDir, _ := cu.Val(AttrCompDir).(string)
// Create the LineReader.
u := &d.unit[d.offsetToUnit(cu.Offset)]
buf := makeBuf(d, u, "line", Offset(off), d.line[off:])
// The compilation directory is implicitly directories[0].
r := LineReader{buf: buf, section: d.line, directories: []string{compDir}}
// Read the header.
if err := r.readHeader(); err != nil {
return nil, err
}
// Initialize line reader state.
r.Reset()
return &r, nil
}
// readHeader reads the line number program header from r.buf and sets
// all of the header fields in r.
func (r *LineReader) readHeader() error {
buf := &r.buf
// Read basic header fields [DWARF2 6.2.4].
hdrOffset := buf.off
unitLength, dwarf64 := buf.unitLength()
r.endOffset = buf.off + unitLength
if r.endOffset > buf.off+Offset(len(buf.data)) {
return DecodeError{"line", hdrOffset, fmt.Sprintf("line table end %d exceeds section size %d", r.endOffset, buf.off+Offset(len(buf.data)))}
}
r.version = buf.uint16()
if buf.err == nil && (r.version < 2 || r.version > 4) {
// DWARF goes to all this effort to make new opcodes
// backward-compatible, and then adds fields right in
// the middle of the header in new versions, so we're
// picky about only supporting known line table
// versions.
return DecodeError{"line", hdrOffset, fmt.Sprintf("unknown line table version %d", r.version)}
}
var headerLength Offset
if dwarf64 {
headerLength = Offset(buf.uint64())
} else {
headerLength = Offset(buf.uint32())
}
r.programOffset = buf.off + headerLength
r.minInstructionLength = int(buf.uint8())
if r.version >= 4 {
// [DWARF4 6.2.4]
r.maxOpsPerInstruction = int(buf.uint8())
} else {
r.maxOpsPerInstruction = 1
}
r.defaultIsStmt = buf.uint8() != 0
r.lineBase = int(int8(buf.uint8()))
r.lineRange = int(buf.uint8())
// Validate header.
if buf.err != nil {
return buf.err
}
if r.maxOpsPerInstruction == 0 {
return DecodeError{"line", hdrOffset, "invalid maximum operations per instruction: 0"}
}
if r.lineRange == 0 {
return DecodeError{"line", hdrOffset, "invalid line range: 0"}
}
// Read standard opcode length table. This table starts with opcode 1.
r.opcodeBase = int(buf.uint8())
r.opcodeLengths = make([]int, r.opcodeBase)
for i := 1; i < r.opcodeBase; i++ {
r.opcodeLengths[i] = int(buf.uint8())
}
// Validate opcode lengths.
if buf.err != nil {
return buf.err
}
for i, length := range r.opcodeLengths {
if known, ok := knownOpcodeLengths[i]; ok && known != length {
return DecodeError{"line", hdrOffset, fmt.Sprintf("opcode %d expected to have length %d, but has length %d", i, known, length)}
}
}
// Read include directories table. The caller already set
// directories[0] to the compilation directory.
for {
directory := buf.string()
if buf.err != nil {
return buf.err
}
if len(directory) == 0 {
break
}
if !path.IsAbs(directory) {
// Relative paths are implicitly relative to
// the compilation directory.
directory = path.Join(r.directories[0], directory)
}
r.directories = append(r.directories, directory)
}
// Read file name list. File numbering starts with 1, so leave
// the first entry nil.
r.fileEntries = make([]*LineFile, 1)
for {
if done, err := r.readFileEntry(); err != nil {
return err
} else if done {
break
}
}
r.initialFileEntries = len(r.fileEntries)
return buf.err
}
// readFileEntry reads a file entry from either the header or a
// DW_LNE_define_file extended opcode and adds it to r.fileEntries. A
// true return value indicates that there are no more entries to read.
func (r *LineReader) readFileEntry() (bool, error) {
name := r.buf.string()
if r.buf.err != nil {
return false, r.buf.err
}
if len(name) == 0 {
return true, nil
}
off := r.buf.off
dirIndex := int(r.buf.uint())
if !path.IsAbs(name) {
if dirIndex >= len(r.directories) {
return false, DecodeError{"line", off, "directory index too large"}
}
name = path.Join(r.directories[dirIndex], name)
}
mtime := r.buf.uint()
length := int(r.buf.uint())
r.fileEntries = append(r.fileEntries, &LineFile{name, mtime, length})
return false, nil
}
// updateFile updates r.state.File after r.fileIndex has
// changed or r.fileEntries has changed.
func (r *LineReader) updateFile() {
if r.fileIndex < len(r.fileEntries) {
r.state.File = r.fileEntries[r.fileIndex]
} else {
r.state.File = nil
}
}
// Next sets *entry to the next row in this line table and moves to
// the next row. If there are no more entries and the line table is
// properly terminated, it returns io.EOF.
//
// Rows are always in order of increasing entry.Address, but
// entry.Line may go forward or backward.
func (r *LineReader) Next(entry *LineEntry) error {
if r.buf.err != nil {
return r.buf.err
}
// Execute opcodes until we reach an opcode that emits a line
// table entry.
for {
if len(r.buf.data) == 0 {
return io.EOF
}
emit := r.step(entry)
if r.buf.err != nil {
return r.buf.err
}
if emit {
return nil
}
}
}
// knownOpcodeLengths gives the opcode lengths (in varint arguments)
// of known standard opcodes.
var knownOpcodeLengths = map[int]int{
lnsCopy: 0,
lnsAdvancePC: 1,
lnsAdvanceLine: 1,
lnsSetFile: 1,
lnsNegateStmt: 0,
lnsSetBasicBlock: 0,
lnsConstAddPC: 0,
lnsSetPrologueEnd: 0,
lnsSetEpilogueBegin: 0,
lnsSetISA: 1,
// lnsFixedAdvancePC takes a uint8 rather than a varint; it's
// unclear what length the header is supposed to claim, so
// ignore it.
}
// step processes the next opcode and updates r.state. If the opcode
// emits a row in the line table, this updates *entry and returns
// true.
func (r *LineReader) step(entry *LineEntry) bool {
opcode := int(r.buf.uint8())
if opcode >= r.opcodeBase {
// Special opcode [DWARF2 6.2.5.1, DWARF4 6.2.5.1]
adjustedOpcode := opcode - r.opcodeBase
r.advancePC(adjustedOpcode / r.lineRange)
lineDelta := r.lineBase + int(adjustedOpcode)%r.lineRange
r.state.Line += lineDelta
goto emit
}
switch opcode {
case 0:
// Extended opcode [DWARF2 6.2.5.3]
length := Offset(r.buf.uint())
startOff := r.buf.off
opcode := r.buf.uint8()
switch opcode {
case lneEndSequence:
r.state.EndSequence = true
*entry = r.state
r.resetState()
case lneSetAddress:
r.state.Address = r.buf.addr()
case lneDefineFile:
if done, err := r.readFileEntry(); err != nil {
r.buf.err = err
return false
} else if done {
r.buf.err = DecodeError{"line", startOff, "malformed DW_LNE_define_file operation"}
return false
}
r.updateFile()
case lneSetDiscriminator:
// [DWARF4 6.2.5.3]
r.state.Discriminator = int(r.buf.uint())
}
r.buf.skip(int(startOff + length - r.buf.off))
if opcode == lneEndSequence {
return true
}
// Standard opcodes [DWARF2 6.2.5.2]
case lnsCopy:
goto emit
case lnsAdvancePC:
r.advancePC(int(r.buf.uint()))
case lnsAdvanceLine:
r.state.Line += int(r.buf.int())
case lnsSetFile:
r.fileIndex = int(r.buf.uint())
r.updateFile()
case lnsSetColumn:
r.state.Column = int(r.buf.uint())
case lnsNegateStmt:
r.state.IsStmt = !r.state.IsStmt
case lnsSetBasicBlock:
r.state.BasicBlock = true
case lnsConstAddPC:
r.advancePC((255 - r.opcodeBase) / r.lineRange)
case lnsFixedAdvancePC:
r.state.Address += uint64(r.buf.uint16())
// DWARF3 standard opcodes [DWARF3 6.2.5.2]
case lnsSetPrologueEnd:
r.state.PrologueEnd = true
case lnsSetEpilogueBegin:
r.state.EpilogueBegin = true
case lnsSetISA:
r.state.ISA = int(r.buf.uint())
default:
// Unhandled standard opcode. Skip the number of
// arguments that the prologue says this opcode has.
for i := 0; i < r.opcodeLengths[opcode]; i++ {
r.buf.uint()
}
}
return false
emit:
*entry = r.state
r.state.BasicBlock = false
r.state.PrologueEnd = false
r.state.EpilogueBegin = false
r.state.Discriminator = 0
return true
}
// advancePC advances "operation pointer" (the combination of Address
// and OpIndex) in r.state by opAdvance steps.
func (r *LineReader) advancePC(opAdvance int) {
opIndex := r.state.OpIndex + opAdvance
r.state.Address += uint64(r.minInstructionLength * (opIndex / r.maxOpsPerInstruction))
r.state.OpIndex = opIndex % r.maxOpsPerInstruction
}
// A LineReaderPos represents a position in a line table.
type LineReaderPos struct {
// off is the current offset in the DWARF line section.
off Offset
// numFileEntries is the length of fileEntries.
numFileEntries int
// state and fileIndex are the statement machine state at
// offset off.
state LineEntry
fileIndex int
}
// Tell returns the current position in the line table.
func (r *LineReader) Tell() LineReaderPos {
return LineReaderPos{r.buf.off, len(r.fileEntries), r.state, r.fileIndex}
}
// Seek restores the line table reader to a position returned by Tell.
//
// The argument pos must have been returned by a call to Tell on this
// line table.
func (r *LineReader) Seek(pos LineReaderPos) {
r.buf.off = pos.off
r.buf.data = r.section[r.buf.off:r.endOffset]
r.fileEntries = r.fileEntries[:pos.numFileEntries]
r.state = pos.state
r.fileIndex = pos.fileIndex
}
// Reset repositions the line table reader at the beginning of the
// line table.
func (r *LineReader) Reset() {
// Reset buffer to the line number program offset.
r.buf.off = r.programOffset
r.buf.data = r.section[r.buf.off:r.endOffset]
// Reset file entries list.
r.fileEntries = r.fileEntries[:r.initialFileEntries]
// Reset line number program state.
r.resetState()
}
// resetState resets r.state to its default values
func (r *LineReader) resetState() {
// Reset the state machine registers to the defaults given in
// [DWARF4 6.2.2].
r.state = LineEntry{
Address: 0,
OpIndex: 0,
File: nil,
Line: 1,
Column: 0,
IsStmt: r.defaultIsStmt,
BasicBlock: false,
PrologueEnd: false,
EpilogueBegin: false,
ISA: 0,
Discriminator: 0,
}
r.fileIndex = 1
r.updateFile()
}
// ErrUnknownPC is the error returned by LineReader.ScanPC when the
// seek PC is not covered by any entry in the line table.
var ErrUnknownPC = errors.New("ErrUnknownPC")
// SeekPC sets *entry to the LineEntry that includes pc and positions
// the reader on the next entry in the line table. If necessary, this
// will seek backwards to find pc.
//
// If pc is not covered by any entry in this line table, SeekPC
// returns ErrUnknownPC. In this case, *entry and the final seek
// position are unspecified.
//
// Note that DWARF line tables only permit sequential, forward scans.
// Hence, in the worst case, this takes time linear in the size of the
// line table. If the caller wishes to do repeated fast PC lookups, it
// should build an appropriate index of the line table.
func (r *LineReader) SeekPC(pc uint64, entry *LineEntry) error {
if err := r.Next(entry); err != nil {
return err
}
if entry.Address > pc {
// We're too far. Start at the beginning of the table.
r.Reset()
if err := r.Next(entry); err != nil {
return err
}
if entry.Address > pc {
// The whole table starts after pc.
r.Reset()
return ErrUnknownPC
}
}
// Scan until we pass pc, then back up one.
for {
var next LineEntry
pos := r.Tell()
if err := r.Next(&next); err != nil {
if err == io.EOF {
return ErrUnknownPC
}
return err
}
if next.Address > pc {
if entry.EndSequence {
// pc is in a hole in the table.
return ErrUnknownPC
}
// entry is the desired entry. Back up the
// cursor to "next" and return success.
r.Seek(pos)
return nil
}
*entry = next
}
}