//===---- Parallelism.cpp - OpenMP GPU parallel implementation ---- C++ -*-===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// Parallel implementation in the GPU. Here is the pattern:
//
//    while (not finished) {
//
//    if (master) {
//      sequential code, decide which par loop to do, or if finished
//     __kmpc_kernel_prepare_parallel() // exec by master only
//    }
//    syncthreads // A
//    __kmpc_kernel_parallel() // exec by all
//    if (this thread is included in the parallel) {
//      switch () for all parallel loops
//      __kmpc_kernel_end_parallel() // exec only by threads in parallel
//    }
//
//
//    The reason we don't exec end_parallel for the threads not included
//    in the parallel loop is that for each barrier in the parallel
//    region, these non-included threads will cycle through the
//    syncthread A. Thus they must preserve their current threadId that
//    is larger than thread in team.
//
//    To make a long story short...
//
//===----------------------------------------------------------------------===//

#include "Debug.h"
#include "DeviceTypes.h"
#include "DeviceUtils.h"
#include "Interface.h"
#include "LibC.h"
#include "Mapping.h"
#include "State.h"
#include "Synchronization.h"

using namespace ompx;

namespace {

void numThreadsStrictError(int32_t nt_strict, int32_t nt_severity,
                           const char *nt_message, int32_t requested,
                           int32_t actual) {
  if (nt_message)
    printf("%s\n", nt_message);
  else
    printf("The computed number of threads (%u) does not match the requested "
           "number of threads (%d). Consider that it might not be supported "
           "to select exactly %d threads on this target device.\n",
           actual, requested, requested);
  if (nt_severity == severity_fatal)
    __builtin_trap();
}

uint32_t determineNumberOfThreads(int32_t NumThreadsClause,
                                  int32_t nt_strict = false,
                                  int32_t nt_severity = severity_fatal,
                                  const char *nt_message = nullptr) {
  uint32_t NThreadsICV =
      NumThreadsClause != -1 ? NumThreadsClause : icv::NThreads;
  uint32_t NumThreads = mapping::getMaxTeamThreads();

  if (NThreadsICV != 0 && NThreadsICV < NumThreads)
    NumThreads = NThreadsICV;

  // SPMD mode allows any number of threads, for generic mode we round down to a
  // multiple of WARPSIZE since it is legal to do so in OpenMP.
  if (!mapping::isSPMDMode()) {
    if (NumThreads < mapping::getWarpSize())
      NumThreads = 1;
    else
      NumThreads = (NumThreads & ~((uint32_t)mapping::getWarpSize() - 1));
  }

  if (NumThreadsClause != -1 && nt_strict &&
      NumThreads != static_cast<uint32_t>(NumThreadsClause))
    numThreadsStrictError(nt_strict, nt_severity, nt_message, NumThreadsClause,
                          NumThreads);

  return NumThreads;
}

// Invoke an outlined parallel function unwrapping arguments (up to 32).
[[clang::always_inline]] void invokeMicrotask(int32_t global_tid,
                                              int32_t bound_tid, void *fn,
                                              void **args, int64_t nargs) {
  switch (nargs) {
#include "generated_microtask_cases.gen"
  default:
    printf("Too many arguments in kmp_invoke_microtask, aborting execution.\n");
    __builtin_trap();
  }
}

} // namespace

extern "C" {

[[clang::always_inline]] void
__kmpc_parallel_spmd(IdentTy *ident, int32_t num_threads, void *fn, void **args,
                     const int64_t nargs, int32_t nt_strict = false,
                     int32_t nt_severity = severity_fatal,
                     const char *nt_message = nullptr) {
  uint32_t TId = mapping::getThreadIdInBlock();
  uint32_t NumThreads =
      determineNumberOfThreads(num_threads, nt_strict, nt_severity, nt_message);
  uint32_t PTeamSize =
      NumThreads == mapping::getMaxTeamThreads() ? 0 : NumThreads;
  // Avoid the race between the read of the `icv::Level` above and the write
  // below by synchronizing all threads here.
  synchronize::threadsAligned(atomic::seq_cst);
  {
    // Note that the order here is important. `icv::Level` has to be updated
    // last or the other updates will cause a thread specific state to be
    // created.
    state::ValueRAII ParallelTeamSizeRAII(state::ParallelTeamSize, PTeamSize,
                                          1u, TId == 0, ident,
                                          /*ForceTeamState=*/true);
    state::ValueRAII ActiveLevelRAII(icv::ActiveLevel, 1u, 0u, TId == 0, ident,
                                     /*ForceTeamState=*/true);
    state::ValueRAII LevelRAII(icv::Level, 1u, 0u, TId == 0, ident,
                               /*ForceTeamState=*/true);

    // Synchronize all threads after the main thread (TId == 0) set up the
    // team state properly.
    synchronize::threadsAligned(atomic::acq_rel);

    state::ParallelTeamSize.assert_eq(PTeamSize, ident,
                                      /*ForceTeamState=*/true);
    icv::ActiveLevel.assert_eq(1u, ident, /*ForceTeamState=*/true);
    icv::Level.assert_eq(1u, ident, /*ForceTeamState=*/true);

    // Ensure we synchronize before we run user code to avoid invalidating the
    // assumptions above.
    synchronize::threadsAligned(atomic::relaxed);

    if (!PTeamSize || TId < PTeamSize)
      invokeMicrotask(TId, 0, fn, args, nargs);

    // Synchronize all threads at the end of a parallel region.
    synchronize::threadsAligned(atomic::seq_cst);
  }

  // Synchronize all threads to make sure every thread exits the scope above;
  // otherwise the following assertions and the assumption in
  // __kmpc_target_deinit may not hold.
  synchronize::threadsAligned(atomic::acq_rel);

  state::ParallelTeamSize.assert_eq(1u, ident, /*ForceTeamState=*/true);
  icv::ActiveLevel.assert_eq(0u, ident, /*ForceTeamState=*/true);
  icv::Level.assert_eq(0u, ident, /*ForceTeamState=*/true);

  // Ensure we synchronize to create an aligned region around the assumptions.
  synchronize::threadsAligned(atomic::relaxed);

  return;
}

[[clang::always_inline]] void __kmpc_parallel_51(
    IdentTy *ident, int32_t, int32_t if_expr, int32_t num_threads,
    int proc_bind, void *fn, void *wrapper_fn, void **args, int64_t nargs,
    int32_t nt_strict = false, int32_t nt_severity = severity_fatal,
    const char *nt_message = nullptr) {
  uint32_t TId = mapping::getThreadIdInBlock();

  // Assert the parallelism level is zero if disabled by the user.
  ASSERT((config::mayUseNestedParallelism() || icv::Level == 0),
         "nested parallelism while disabled");

  // Handle the serialized case first, same for SPMD/non-SPMD:
  // 1) if-clause(0)
  // 2) parallel in task or other thread state inducing construct
  // 3) nested parallel regions
  if (OMP_UNLIKELY(!if_expr || state::HasThreadState ||
                   (config::mayUseNestedParallelism() && icv::Level))) {
    // OpenMP 6.0 12.1.2 requires the num_threads 'strict' modifier to also have
    // effect when parallel execution is disabled by a corresponding if clause
    // attached to the parallel directive.
    if (nt_strict && num_threads > 1)
      numThreadsStrictError(nt_strict, nt_severity, nt_message, num_threads, 1);
    state::DateEnvironmentRAII DERAII(ident);
    ++icv::Level;
    invokeMicrotask(TId, 0, fn, args, nargs);
    return;
  }

  // From this point forward we know that there is no thread state used.
  ASSERT(state::HasThreadState == false, nullptr);

  if (mapping::isSPMDMode()) {
    // This was moved to its own routine so it could be called directly
    // in certain situations to avoid resource consumption of unused
    // logic in parallel_51.
    __kmpc_parallel_spmd(ident, num_threads, fn, args, nargs, nt_strict,
                         nt_severity, nt_message);

    return;
  }

  uint32_t NumThreads =
      determineNumberOfThreads(num_threads, nt_strict, nt_severity, nt_message);
  uint32_t MaxTeamThreads = mapping::getMaxTeamThreads();
  uint32_t PTeamSize = NumThreads == MaxTeamThreads ? 0 : NumThreads;

  // We do *not* create a new data environment because all threads in the team
  // that are active are now running this parallel region. They share the
  // TeamState, which has an increase level-var and potentially active-level
  // set, but they do not have individual ThreadStates yet. If they ever
  // modify the ICVs beyond this point a ThreadStates will be allocated.

  bool IsActiveParallelRegion = NumThreads > 1;
  if (!IsActiveParallelRegion) {
    state::ValueRAII LevelRAII(icv::Level, 1u, 0u, true, ident);
    invokeMicrotask(TId, 0, fn, args, nargs);
    return;
  }

  void **GlobalArgs = nullptr;
  if (nargs) {
    __kmpc_begin_sharing_variables(&GlobalArgs, nargs);
    switch (nargs) {
    default:
      for (int I = 0; I < nargs; I++)
        GlobalArgs[I] = args[I];
      break;
    case 16:
      GlobalArgs[15] = args[15];
      [[fallthrough]];
    case 15:
      GlobalArgs[14] = args[14];
      [[fallthrough]];
    case 14:
      GlobalArgs[13] = args[13];
      [[fallthrough]];
    case 13:
      GlobalArgs[12] = args[12];
      [[fallthrough]];
    case 12:
      GlobalArgs[11] = args[11];
      [[fallthrough]];
    case 11:
      GlobalArgs[10] = args[10];
      [[fallthrough]];
    case 10:
      GlobalArgs[9] = args[9];
      [[fallthrough]];
    case 9:
      GlobalArgs[8] = args[8];
      [[fallthrough]];
    case 8:
      GlobalArgs[7] = args[7];
      [[fallthrough]];
    case 7:
      GlobalArgs[6] = args[6];
      [[fallthrough]];
    case 6:
      GlobalArgs[5] = args[5];
      [[fallthrough]];
    case 5:
      GlobalArgs[4] = args[4];
      [[fallthrough]];
    case 4:
      GlobalArgs[3] = args[3];
      [[fallthrough]];
    case 3:
      GlobalArgs[2] = args[2];
      [[fallthrough]];
    case 2:
      GlobalArgs[1] = args[1];
      [[fallthrough]];
    case 1:
      GlobalArgs[0] = args[0];
      [[fallthrough]];
    case 0:
      break;
    }
  }

  {
    // Note that the order here is important. `icv::Level` has to be updated
    // last or the other updates will cause a thread specific state to be
    // created.
    state::ValueRAII ParallelTeamSizeRAII(state::ParallelTeamSize, PTeamSize,
                                          1u, true, ident,
                                          /*ForceTeamState=*/true);
    state::ValueRAII ParallelRegionFnRAII(state::ParallelRegionFn, wrapper_fn,
                                          (void *)nullptr, true, ident,
                                          /*ForceTeamState=*/true);
    state::ValueRAII ActiveLevelRAII(icv::ActiveLevel, 1u, 0u, true, ident,
                                     /*ForceTeamState=*/true);
    state::ValueRAII LevelRAII(icv::Level, 1u, 0u, true, ident,
                               /*ForceTeamState=*/true);

    // Master signals work to activate workers.
    synchronize::threads(atomic::seq_cst);
    // Master waits for workers to signal.
    synchronize::threads(atomic::seq_cst);
  }

  if (nargs)
    __kmpc_end_sharing_variables();
}

[[clang::always_inline]] void __kmpc_parallel_60(
    IdentTy *ident, int32_t id, int32_t if_expr, int32_t num_threads,
    int proc_bind, void *fn, void *wrapper_fn, void **args, int64_t nargs,
    int32_t nt_strict = false, int32_t nt_severity = severity_fatal,
    const char *nt_message = nullptr) {
  return __kmpc_parallel_51(ident, id, if_expr, num_threads, proc_bind, fn,
                            wrapper_fn, args, nargs, nt_strict, nt_severity,
                            nt_message);
}

[[clang::noinline]] bool __kmpc_kernel_parallel(ParallelRegionFnTy *WorkFn) {
  // Work function and arguments for L1 parallel region.
  *WorkFn = state::ParallelRegionFn;

  // If this is the termination signal from the master, quit early.
  if (!*WorkFn)
    return false;

  // Set to true for workers participating in the parallel region.
  uint32_t TId = mapping::getThreadIdInBlock();
  bool ThreadIsActive = TId < state::getEffectivePTeamSize();
  return ThreadIsActive;
}

[[clang::noinline]] void __kmpc_kernel_end_parallel() {
  // In case we have modified an ICV for this thread before a ThreadState was
  // created. We drop it now to not contaminate the next parallel region.
  ASSERT(!mapping::isSPMDMode(), nullptr);
  uint32_t TId = mapping::getThreadIdInBlock();
  state::resetStateForThread(TId);
  ASSERT(!mapping::isSPMDMode(), nullptr);
}

uint16_t __kmpc_parallel_level(IdentTy *, uint32_t) { return omp_get_level(); }

int32_t __kmpc_global_thread_num(IdentTy *) { return omp_get_thread_num(); }

void __kmpc_push_num_teams(IdentTy *loc, int32_t tid, int32_t num_teams,
                           int32_t thread_limit) {}

void __kmpc_push_proc_bind(IdentTy *loc, uint32_t tid, int proc_bind) {}
}