//===- DAGCombiner.cpp - Implement a DAG node combiner --------------------===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// This pass combines dag nodes to form fewer, simpler DAG nodes.  It can be run
// both before and after the DAG is legalized.
//
// This pass is not a substitute for the LLVM IR instcombine pass. This pass is
// primarily intended to handle simplification opportunities that are implicit
// in the LLVM IR and exposed by the various codegen lowering phases.
//
//===----------------------------------------------------------------------===//

#include "llvm/ADT/APFloat.h"
#include "llvm/ADT/APInt.h"
#include "llvm/ADT/ArrayRef.h"
#include "llvm/ADT/DenseMap.h"
#include "llvm/ADT/IntervalMap.h"
#include "llvm/ADT/STLExtras.h"
#include "llvm/ADT/SetVector.h"
#include "llvm/ADT/SmallBitVector.h"
#include "llvm/ADT/SmallPtrSet.h"
#include "llvm/ADT/SmallSet.h"
#include "llvm/ADT/SmallVector.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/Analysis/AliasAnalysis.h"
#include "llvm/Analysis/MemoryLocation.h"
#include "llvm/Analysis/TargetLibraryInfo.h"
#include "llvm/Analysis/ValueTracking.h"
#include "llvm/Analysis/VectorUtils.h"
#include "llvm/CodeGen/ByteProvider.h"
#include "llvm/CodeGen/DAGCombine.h"
#include "llvm/CodeGen/ISDOpcodes.h"
#include "llvm/CodeGen/MachineFunction.h"
#include "llvm/CodeGen/MachineMemOperand.h"
#include "llvm/CodeGen/SDPatternMatch.h"
#include "llvm/CodeGen/SelectionDAG.h"
#include "llvm/CodeGen/SelectionDAGAddressAnalysis.h"
#include "llvm/CodeGen/SelectionDAGNodes.h"
#include "llvm/CodeGen/SelectionDAGTargetInfo.h"
#include "llvm/CodeGen/TargetLowering.h"
#include "llvm/CodeGen/TargetRegisterInfo.h"
#include "llvm/CodeGen/TargetSubtargetInfo.h"
#include "llvm/CodeGen/ValueTypes.h"
#include "llvm/CodeGenTypes/MachineValueType.h"
#include "llvm/IR/Attributes.h"
#include "llvm/IR/Constant.h"
#include "llvm/IR/DataLayout.h"
#include "llvm/IR/DerivedTypes.h"
#include "llvm/IR/Function.h"
#include "llvm/IR/Metadata.h"
#include "llvm/Support/Casting.h"
#include "llvm/Support/CodeGen.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Compiler.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/DebugCounter.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/KnownBits.h"
#include "llvm/Support/MathExtras.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/Target/TargetMachine.h"
#include "llvm/Target/TargetOptions.h"
#include <algorithm>
#include <cassert>
#include <cstdint>
#include <functional>
#include <iterator>
#include <optional>
#include <string>
#include <tuple>
#include <utility>
#include <variant>

#include "MatchContext.h"

using namespace llvm;
using namespace llvm::SDPatternMatch;

#define DEBUG_TYPE "dagcombine"

STATISTIC(NodesCombined   , "Number of dag nodes combined");
STATISTIC(PreIndexedNodes , "Number of pre-indexed nodes created");
STATISTIC(PostIndexedNodes, "Number of post-indexed nodes created");
STATISTIC(OpsNarrowed     , "Number of load/op/store narrowed");
STATISTIC(LdStFP2Int      , "Number of fp load/store pairs transformed to int");
STATISTIC(SlicedLoads, "Number of load sliced");
STATISTIC(NumFPLogicOpsConv, "Number of logic ops converted to fp ops");

DEBUG_COUNTER(DAGCombineCounter, "dagcombine",
              "Controls whether a DAG combine is performed for a node");

static cl::opt<bool>
CombinerGlobalAA("combiner-global-alias-analysis", cl::Hidden,
                 cl::desc("Enable DAG combiner's use of IR alias analysis"));

static cl::opt<bool>
UseTBAA("combiner-use-tbaa", cl::Hidden, cl::init(true),
        cl::desc("Enable DAG combiner's use of TBAA"));

#ifndef NDEBUG
static cl::opt<std::string>
CombinerAAOnlyFunc("combiner-aa-only-func", cl::Hidden,
                   cl::desc("Only use DAG-combiner alias analysis in this"
                            " function"));
#endif

/// Hidden option to stress test load slicing, i.e., when this option
/// is enabled, load slicing bypasses most of its profitability guards.
static cl::opt<bool>
StressLoadSlicing("combiner-stress-load-slicing", cl::Hidden,
                  cl::desc("Bypass the profitability model of load slicing"),
                  cl::init(false));

static cl::opt<bool>
  MaySplitLoadIndex("combiner-split-load-index", cl::Hidden, cl::init(true),
                    cl::desc("DAG combiner may split indexing from loads"));

static cl::opt<bool>
    EnableStoreMerging("combiner-store-merging", cl::Hidden, cl::init(true),
                       cl::desc("DAG combiner enable merging multiple stores "
                                "into a wider store"));

static cl::opt<unsigned> TokenFactorInlineLimit(
    "combiner-tokenfactor-inline-limit", cl::Hidden, cl::init(2048),
    cl::desc("Limit the number of operands to inline for Token Factors"));

static cl::opt<unsigned> StoreMergeDependenceLimit(
    "combiner-store-merge-dependence-limit", cl::Hidden, cl::init(10),
    cl::desc("Limit the number of times for the same StoreNode and RootNode "
             "to bail out in store merging dependence check"));

static cl::opt<bool> EnableReduceLoadOpStoreWidth(
    "combiner-reduce-load-op-store-width", cl::Hidden, cl::init(true),
    cl::desc("DAG combiner enable reducing the width of load/op/store "
             "sequence"));

static cl::opt<bool> EnableShrinkLoadReplaceStoreWithStore(
    "combiner-shrink-load-replace-store-with-store", cl::Hidden, cl::init(true),
    cl::desc("DAG combiner enable load/<replace bytes>/store with "
             "a narrower store"));

static cl::opt<bool> EnableVectorFCopySignExtendRound(
    "combiner-vector-fcopysign-extend-round", cl::Hidden, cl::init(false),
    cl::desc(
        "Enable merging extends and rounds into FCOPYSIGN on vector types"));

static cl::opt<unsigned int>
    MaxSteps("has-predecessor-max-steps", cl::Hidden, cl::init(8192),
             cl::desc("DAG combiner limit number of steps when searching DAG "
                      "for predecessor nodes"));

namespace {

  class DAGCombiner {
    SelectionDAG &DAG;
    const TargetLowering &TLI;
    const SelectionDAGTargetInfo *STI;
    CombineLevel Level = BeforeLegalizeTypes;
    CodeGenOptLevel OptLevel;
    bool LegalDAG = false;
    bool LegalOperations = false;
    bool LegalTypes = false;
    bool ForCodeSize;
    bool DisableGenericCombines;

    /// Worklist of all of the nodes that need to be simplified.
    ///
    /// This must behave as a stack -- new nodes to process are pushed onto the
    /// back and when processing we pop off of the back.
    ///
    /// The worklist will not contain duplicates but may contain null entries
    /// due to nodes being deleted from the underlying DAG. For fast lookup and
    /// deduplication, the index of the node in this vector is stored in the
    /// node in SDNode::CombinerWorklistIndex.
    SmallVector<SDNode *, 64> Worklist;

    /// This records all nodes attempted to be added to the worklist since we
    /// considered a new worklist entry. As we keep do not add duplicate nodes
    /// in the worklist, this is different from the tail of the worklist.
    SmallSetVector<SDNode *, 32> PruningList;

    /// Map from candidate StoreNode to the pair of RootNode and count.
    /// The count is used to track how many times we have seen the StoreNode
    /// with the same RootNode bail out in dependence check. If we have seen
    /// the bail out for the same pair many times over a limit, we won't
    /// consider the StoreNode with the same RootNode as store merging
    /// candidate again.
    DenseMap<SDNode *, std::pair<SDNode *, unsigned>> StoreRootCountMap;

    // AA - Used for DAG load/store alias analysis.
    AliasAnalysis *AA;

    /// This caches all chains that have already been processed in
    /// DAGCombiner::getStoreMergeCandidates() and found to have no mergeable
    /// stores candidates.
    SmallPtrSet<SDNode *, 4> ChainsWithoutMergeableStores;

    /// When an instruction is simplified, add all users of the instruction to
    /// the work lists because they might get more simplified now.
    void AddUsersToWorklist(SDNode *N) {
      for (SDNode *Node : N->uses())
        AddToWorklist(Node);
    }

    /// Convenient shorthand to add a node and all of its user to the worklist.
    void AddToWorklistWithUsers(SDNode *N) {
      AddUsersToWorklist(N);
      AddToWorklist(N);
    }

    // Prune potentially dangling nodes. This is called after
    // any visit to a node, but should also be called during a visit after any
    // failed combine which may have created a DAG node.
    void clearAddedDanglingWorklistEntries() {
      // Check any nodes added to the worklist to see if they are prunable.
      while (!PruningList.empty()) {
        auto *N = PruningList.pop_back_val();
        if (N->use_empty())
          recursivelyDeleteUnusedNodes(N);
      }
    }

    SDNode *getNextWorklistEntry() {
      // Before we do any work, remove nodes that are not in use.
      clearAddedDanglingWorklistEntries();
      SDNode *N = nullptr;
      // The Worklist holds the SDNodes in order, but it may contain null
      // entries.
      while (!N && !Worklist.empty()) {
        N = Worklist.pop_back_val();
      }

      if (N) {
        assert(N->getCombinerWorklistIndex() >= 0 &&
               "Found a worklist entry without a corresponding map entry!");
        // Set to -2 to indicate that we combined the node.
        N->setCombinerWorklistIndex(-2);
      }
      return N;
    }

    /// Call the node-specific routine that folds each particular type of node.
    SDValue visit(SDNode *N);

  public:
    DAGCombiner(SelectionDAG &D, AliasAnalysis *AA, CodeGenOptLevel OL)
        : DAG(D), TLI(D.getTargetLoweringInfo()),
          STI(D.getSubtarget().getSelectionDAGInfo()), OptLevel(OL), AA(AA) {
      ForCodeSize = DAG.shouldOptForSize();
      DisableGenericCombines = STI && STI->disableGenericCombines(OptLevel);

      MaximumLegalStoreInBits = 0;
      // We use the minimum store size here, since that's all we can guarantee
      // for the scalable vector types.
      for (MVT VT : MVT::all_valuetypes())
        if (EVT(VT).isSimple() && VT != MVT::Other &&
            TLI.isTypeLegal(EVT(VT)) &&
            VT.getSizeInBits().getKnownMinValue() >= MaximumLegalStoreInBits)
          MaximumLegalStoreInBits = VT.getSizeInBits().getKnownMinValue();
    }

    void ConsiderForPruning(SDNode *N) {
      // Mark this for potential pruning.
      PruningList.insert(N);
    }

    /// Add to the worklist making sure its instance is at the back (next to be
    /// processed.)
    void AddToWorklist(SDNode *N, bool IsCandidateForPruning = true,
                       bool SkipIfCombinedBefore = false) {
      assert(N->getOpcode() != ISD::DELETED_NODE &&
             "Deleted Node added to Worklist");

      // Skip handle nodes as they can't usefully be combined and confuse the
      // zero-use deletion strategy.
      if (N->getOpcode() == ISD::HANDLENODE)
        return;

      if (SkipIfCombinedBefore && N->getCombinerWorklistIndex() == -2)
        return;

      if (IsCandidateForPruning)
        ConsiderForPruning(N);

      if (N->getCombinerWorklistIndex() < 0) {
        N->setCombinerWorklistIndex(Worklist.size());
        Worklist.push_back(N);
      }
    }

    /// Remove all instances of N from the worklist.
    void removeFromWorklist(SDNode *N) {
      PruningList.remove(N);
      StoreRootCountMap.erase(N);

      int WorklistIndex = N->getCombinerWorklistIndex();
      // If not in the worklist, the index might be -1 or -2 (was combined
      // before). As the node gets deleted anyway, there's no need to update
      // the index.
      if (WorklistIndex < 0)
        return; // Not in the worklist.

      // Null out the entry rather than erasing it to avoid a linear operation.
      Worklist[WorklistIndex] = nullptr;
      N->setCombinerWorklistIndex(-1);
    }

    void deleteAndRecombine(SDNode *N);
    bool recursivelyDeleteUnusedNodes(SDNode *N);

    /// Replaces all uses of the results of one DAG node with new values.
    SDValue CombineTo(SDNode *N, const SDValue *To, unsigned NumTo,
                      bool AddTo = true);

    /// Replaces all uses of the results of one DAG node with new values.
    SDValue CombineTo(SDNode *N, SDValue Res, bool AddTo = true) {
      return CombineTo(N, &Res, 1, AddTo);
    }

    /// Replaces all uses of the results of one DAG node with new values.
    SDValue CombineTo(SDNode *N, SDValue Res0, SDValue Res1,
                      bool AddTo = true) {
      SDValue To[] = { Res0, Res1 };
      return CombineTo(N, To, 2, AddTo);
    }

    void CommitTargetLoweringOpt(const TargetLowering::TargetLoweringOpt &TLO);

  private:
    unsigned MaximumLegalStoreInBits;

    /// Check the specified integer node value to see if it can be simplified or
    /// if things it uses can be simplified by bit propagation.
    /// If so, return true.
    bool SimplifyDemandedBits(SDValue Op) {
      unsigned BitWidth = Op.getScalarValueSizeInBits();
      APInt DemandedBits = APInt::getAllOnes(BitWidth);
      return SimplifyDemandedBits(Op, DemandedBits);
    }

    bool SimplifyDemandedBits(SDValue Op, const APInt &DemandedBits) {
      EVT VT = Op.getValueType();
      APInt DemandedElts = VT.isFixedLengthVector()
                               ? APInt::getAllOnes(VT.getVectorNumElements())
                               : APInt(1, 1);
      return SimplifyDemandedBits(Op, DemandedBits, DemandedElts, false);
    }

    /// Check the specified vector node value to see if it can be simplified or
    /// if things it uses can be simplified as it only uses some of the
    /// elements. If so, return true.
    bool SimplifyDemandedVectorElts(SDValue Op) {
      // TODO: For now just pretend it cannot be simplified.
      if (Op.getValueType().isScalableVector())
        return false;

      unsigned NumElts = Op.getValueType().getVectorNumElements();
      APInt DemandedElts = APInt::getAllOnes(NumElts);
      return SimplifyDemandedVectorElts(Op, DemandedElts);
    }

    bool SimplifyDemandedBits(SDValue Op, const APInt &DemandedBits,
                              const APInt &DemandedElts,
                              bool AssumeSingleUse = false);
    bool SimplifyDemandedVectorElts(SDValue Op, const APInt &DemandedElts,
                                    bool AssumeSingleUse = false);

    bool CombineToPreIndexedLoadStore(SDNode *N);
    bool CombineToPostIndexedLoadStore(SDNode *N);
    SDValue SplitIndexingFromLoad(LoadSDNode *LD);
    bool SliceUpLoad(SDNode *N);

    // Looks up the chain to find a unique (unaliased) store feeding the passed
    // load. If no such store is found, returns a nullptr.
    // Note: This will look past a CALLSEQ_START if the load is chained to it so
    //       so that it can find stack stores for byval params.
    StoreSDNode *getUniqueStoreFeeding(LoadSDNode *LD, int64_t &Offset);
    // Scalars have size 0 to distinguish from singleton vectors.
    SDValue ForwardStoreValueToDirectLoad(LoadSDNode *LD);
    bool getTruncatedStoreValue(StoreSDNode *ST, SDValue &Val);
    bool extendLoadedValueToExtension(LoadSDNode *LD, SDValue &Val);

    /// Replace an ISD::EXTRACT_VECTOR_ELT of a load with a narrowed
    ///   load.
    ///
    /// \param EVE ISD::EXTRACT_VECTOR_ELT to be replaced.
    /// \param InVecVT type of the input vector to EVE with bitcasts resolved.
    /// \param EltNo index of the vector element to load.
    /// \param OriginalLoad load that EVE came from to be replaced.
    /// \returns EVE on success SDValue() on failure.
    SDValue scalarizeExtractedVectorLoad(SDNode *EVE, EVT InVecVT,
                                         SDValue EltNo,
                                         LoadSDNode *OriginalLoad);
    void ReplaceLoadWithPromotedLoad(SDNode *Load, SDNode *ExtLoad);
    SDValue PromoteOperand(SDValue Op, EVT PVT, bool &Replace);
    SDValue SExtPromoteOperand(SDValue Op, EVT PVT);
    SDValue ZExtPromoteOperand(SDValue Op, EVT PVT);
    SDValue PromoteIntBinOp(SDValue Op);
    SDValue PromoteIntShiftOp(SDValue Op);
    SDValue PromoteExtend(SDValue Op);
    bool PromoteLoad(SDValue Op);

    SDValue foldShiftToAvg(SDNode *N);

    SDValue combineMinNumMaxNum(const SDLoc &DL, EVT VT, SDValue LHS,
                                SDValue RHS, SDValue True, SDValue False,
                                ISD::CondCode CC);

    /// Call the node-specific routine that knows how to fold each
    /// particular type of node. If that doesn't do anything, try the
    /// target-specific DAG combines.
    SDValue combine(SDNode *N);

    // Visitation implementation - Implement dag node combining for different
    // node types.  The semantics are as follows:
    // Return Value:
    //   SDValue.getNode() == 0 - No change was made
    //   SDValue.getNode() == N - N was replaced, is dead and has been handled.
    //   otherwise              - N should be replaced by the returned Operand.
    //
    SDValue visitTokenFactor(SDNode *N);
    SDValue visitMERGE_VALUES(SDNode *N);
    SDValue visitADD(SDNode *N);
    SDValue visitADDLike(SDNode *N);
    SDValue visitADDLikeCommutative(SDValue N0, SDValue N1, SDNode *LocReference);
    SDValue visitSUB(SDNode *N);
    SDValue visitADDSAT(SDNode *N);
    SDValue visitSUBSAT(SDNode *N);
    SDValue visitADDC(SDNode *N);
    SDValue visitADDO(SDNode *N);
    SDValue visitUADDOLike(SDValue N0, SDValue N1, SDNode *N);
    SDValue visitSUBC(SDNode *N);
    SDValue visitSUBO(SDNode *N);
    SDValue visitADDE(SDNode *N);
    SDValue visitUADDO_CARRY(SDNode *N);
    SDValue visitSADDO_CARRY(SDNode *N);
    SDValue visitUADDO_CARRYLike(SDValue N0, SDValue N1, SDValue CarryIn,
                                 SDNode *N);
    SDValue visitSADDO_CARRYLike(SDValue N0, SDValue N1, SDValue CarryIn,
                                 SDNode *N);
    SDValue visitSUBE(SDNode *N);
    SDValue visitUSUBO_CARRY(SDNode *N);
    SDValue visitSSUBO_CARRY(SDNode *N);
    template <class MatchContextClass> SDValue visitMUL(SDNode *N);
    SDValue visitMULFIX(SDNode *N);
    SDValue useDivRem(SDNode *N);
    SDValue visitSDIV(SDNode *N);
    SDValue visitSDIVLike(SDValue N0, SDValue N1, SDNode *N);
    SDValue visitUDIV(SDNode *N);
    SDValue visitUDIVLike(SDValue N0, SDValue N1, SDNode *N);
    SDValue visitREM(SDNode *N);
    SDValue visitMULHU(SDNode *N);
    SDValue visitMULHS(SDNode *N);
    SDValue visitAVG(SDNode *N);
    SDValue visitABD(SDNode *N);
    SDValue visitSMUL_LOHI(SDNode *N);
    SDValue visitUMUL_LOHI(SDNode *N);
    SDValue visitMULO(SDNode *N);
    SDValue visitIMINMAX(SDNode *N);
    SDValue visitAND(SDNode *N);
    SDValue visitANDLike(SDValue N0, SDValue N1, SDNode *N);
    SDValue visitOR(SDNode *N);
    SDValue visitORLike(SDValue N0, SDValue N1, const SDLoc &DL);
    SDValue visitXOR(SDNode *N);
    SDValue SimplifyVCastOp(SDNode *N, const SDLoc &DL);
    SDValue SimplifyVBinOp(SDNode *N, const SDLoc &DL);
    SDValue visitSHL(SDNode *N);
    SDValue visitSRA(SDNode *N);
    SDValue visitSRL(SDNode *N);
    SDValue visitFunnelShift(SDNode *N);
    SDValue visitSHLSAT(SDNode *N);
    SDValue visitRotate(SDNode *N);
    SDValue visitABS(SDNode *N);
    SDValue visitBSWAP(SDNode *N);
    SDValue visitBITREVERSE(SDNode *N);
    SDValue visitCTLZ(SDNode *N);
    SDValue visitCTLZ_ZERO_UNDEF(SDNode *N);
    SDValue visitCTTZ(SDNode *N);
    SDValue visitCTTZ_ZERO_UNDEF(SDNode *N);
    SDValue visitCTPOP(SDNode *N);
    SDValue visitSELECT(SDNode *N);
    SDValue visitVSELECT(SDNode *N);
    SDValue visitVP_SELECT(SDNode *N);
    SDValue visitSELECT_CC(SDNode *N);
    SDValue visitSETCC(SDNode *N);
    SDValue visitSETCCCARRY(SDNode *N);
    SDValue visitSIGN_EXTEND(SDNode *N);
    SDValue visitZERO_EXTEND(SDNode *N);
    SDValue visitANY_EXTEND(SDNode *N);
    SDValue visitAssertExt(SDNode *N);
    SDValue visitAssertAlign(SDNode *N);
    SDValue visitSIGN_EXTEND_INREG(SDNode *N);
    SDValue visitEXTEND_VECTOR_INREG(SDNode *N);
    SDValue visitTRUNCATE(SDNode *N);
    SDValue visitTRUNCATE_USAT_U(SDNode *N);
    SDValue visitBITCAST(SDNode *N);
    SDValue visitFREEZE(SDNode *N);
    SDValue visitBUILD_PAIR(SDNode *N);
    SDValue visitFADD(SDNode *N);
    SDValue visitVP_FADD(SDNode *N);
    SDValue visitVP_FSUB(SDNode *N);
    SDValue visitSTRICT_FADD(SDNode *N);
    SDValue visitFSUB(SDNode *N);
    SDValue visitFMUL(SDNode *N);
    template <class MatchContextClass> SDValue visitFMA(SDNode *N);
    SDValue visitFMAD(SDNode *N);
    SDValue visitFDIV(SDNode *N);
    SDValue visitFREM(SDNode *N);
    SDValue visitFSQRT(SDNode *N);
    SDValue visitFCOPYSIGN(SDNode *N);
    SDValue visitFPOW(SDNode *N);
    SDValue visitFCANONICALIZE(SDNode *N);
    SDValue visitSINT_TO_FP(SDNode *N);
    SDValue visitUINT_TO_FP(SDNode *N);
    SDValue visitFP_TO_SINT(SDNode *N);
    SDValue visitFP_TO_UINT(SDNode *N);
    SDValue visitXROUND(SDNode *N);
    SDValue visitFP_ROUND(SDNode *N);
    SDValue visitFP_EXTEND(SDNode *N);
    SDValue visitFNEG(SDNode *N);
    SDValue visitFABS(SDNode *N);
    SDValue visitFCEIL(SDNode *N);
    SDValue visitFTRUNC(SDNode *N);
    SDValue visitFFREXP(SDNode *N);
    SDValue visitFFLOOR(SDNode *N);
    SDValue visitFMinMax(SDNode *N);
    SDValue visitBRCOND(SDNode *N);
    SDValue visitBR_CC(SDNode *N);
    SDValue visitLOAD(SDNode *N);

    SDValue replaceStoreChain(StoreSDNode *ST, SDValue BetterChain);
    SDValue replaceStoreOfFPConstant(StoreSDNode *ST);
    SDValue replaceStoreOfInsertLoad(StoreSDNode *ST);

    bool refineExtractVectorEltIntoMultipleNarrowExtractVectorElts(SDNode *N);

    SDValue visitSTORE(SDNode *N);
    SDValue visitATOMIC_STORE(SDNode *N);
    SDValue visitLIFETIME_END(SDNode *N);
    SDValue visitINSERT_VECTOR_ELT(SDNode *N);
    SDValue visitEXTRACT_VECTOR_ELT(SDNode *N);
    SDValue visitBUILD_VECTOR(SDNode *N);
    SDValue visitCONCAT_VECTORS(SDNode *N);
    SDValue visitEXTRACT_SUBVECTOR(SDNode *N);
    SDValue visitVECTOR_SHUFFLE(SDNode *N);
    SDValue visitSCALAR_TO_VECTOR(SDNode *N);
    SDValue visitINSERT_SUBVECTOR(SDNode *N);
    SDValue visitVECTOR_COMPRESS(SDNode *N);
    SDValue visitMLOAD(SDNode *N);
    SDValue visitMSTORE(SDNode *N);
    SDValue visitMGATHER(SDNode *N);
    SDValue visitMSCATTER(SDNode *N);
    SDValue visitMHISTOGRAM(SDNode *N);
    SDValue visitVPGATHER(SDNode *N);
    SDValue visitVPSCATTER(SDNode *N);
    SDValue visitVP_STRIDED_LOAD(SDNode *N);
    SDValue visitVP_STRIDED_STORE(SDNode *N);
    SDValue visitFP_TO_FP16(SDNode *N);
    SDValue visitFP16_TO_FP(SDNode *N);
    SDValue visitFP_TO_BF16(SDNode *N);
    SDValue visitBF16_TO_FP(SDNode *N);
    SDValue visitVECREDUCE(SDNode *N);
    SDValue visitVPOp(SDNode *N);
    SDValue visitGET_FPENV_MEM(SDNode *N);
    SDValue visitSET_FPENV_MEM(SDNode *N);

    template <class MatchContextClass>
    SDValue visitFADDForFMACombine(SDNode *N);
    template <class MatchContextClass>
    SDValue visitFSUBForFMACombine(SDNode *N);
    SDValue visitFMULForFMADistributiveCombine(SDNode *N);

    SDValue XformToShuffleWithZero(SDNode *N);
    bool reassociationCanBreakAddressingModePattern(unsigned Opc,
                                                    const SDLoc &DL,
                                                    SDNode *N,
                                                    SDValue N0,
                                                    SDValue N1);
    SDValue reassociateOpsCommutative(unsigned Opc, const SDLoc &DL, SDValue N0,
                                      SDValue N1, SDNodeFlags Flags);
    SDValue reassociateOps(unsigned Opc, const SDLoc &DL, SDValue N0,
                           SDValue N1, SDNodeFlags Flags);
    SDValue reassociateReduction(unsigned RedOpc, unsigned Opc, const SDLoc &DL,
                                 EVT VT, SDValue N0, SDValue N1,
                                 SDNodeFlags Flags = SDNodeFlags());

    SDValue visitShiftByConstant(SDNode *N);

    SDValue foldSelectOfConstants(SDNode *N);
    SDValue foldVSelectOfConstants(SDNode *N);
    SDValue foldBinOpIntoSelect(SDNode *BO);
    bool SimplifySelectOps(SDNode *SELECT, SDValue LHS, SDValue RHS);
    SDValue hoistLogicOpWithSameOpcodeHands(SDNode *N);
    SDValue SimplifySelect(const SDLoc &DL, SDValue N0, SDValue N1, SDValue N2);
    SDValue SimplifySelectCC(const SDLoc &DL, SDValue N0, SDValue N1,
                             SDValue N2, SDValue N3, ISD::CondCode CC,
                             bool NotExtCompare = false);
    SDValue convertSelectOfFPConstantsToLoadOffset(
        const SDLoc &DL, SDValue N0, SDValue N1, SDValue N2, SDValue N3,
        ISD::CondCode CC);
    SDValue foldSignChangeInBitcast(SDNode *N);
    SDValue foldSelectCCToShiftAnd(const SDLoc &DL, SDValue N0, SDValue N1,
                                   SDValue N2, SDValue N3, ISD::CondCode CC);
    SDValue foldSelectOfBinops(SDNode *N);
    SDValue foldSextSetcc(SDNode *N);
    SDValue foldLogicOfSetCCs(bool IsAnd, SDValue N0, SDValue N1,
                              const SDLoc &DL);
    SDValue foldSubToUSubSat(EVT DstVT, SDNode *N, const SDLoc &DL);
    SDValue foldABSToABD(SDNode *N, const SDLoc &DL);
    SDValue foldSelectToABD(SDValue LHS, SDValue RHS, SDValue True,
                            SDValue False, ISD::CondCode CC, const SDLoc &DL);
    SDValue unfoldMaskedMerge(SDNode *N);
    SDValue unfoldExtremeBitClearingToShifts(SDNode *N);
    SDValue SimplifySetCC(EVT VT, SDValue N0, SDValue N1, ISD::CondCode Cond,
                          const SDLoc &DL, bool foldBooleans);
    SDValue rebuildSetCC(SDValue N);

    bool isSetCCEquivalent(SDValue N, SDValue &LHS, SDValue &RHS,
                           SDValue &CC, bool MatchStrict = false) const;
    bool isOneUseSetCC(SDValue N) const;

    SDValue foldAddToAvg(SDNode *N, const SDLoc &DL);
    SDValue foldSubToAvg(SDNode *N, const SDLoc &DL);

    SDValue SimplifyNodeWithTwoResults(SDNode *N, unsigned LoOp,
                                         unsigned HiOp);
    SDValue CombineConsecutiveLoads(SDNode *N, EVT VT);
    SDValue foldBitcastedFPLogic(SDNode *N, SelectionDAG &DAG,
                                 const TargetLowering &TLI);

    SDValue CombineExtLoad(SDNode *N);
    SDValue CombineZExtLogicopShiftLoad(SDNode *N);
    SDValue combineRepeatedFPDivisors(SDNode *N);
    SDValue combineFMulOrFDivWithIntPow2(SDNode *N);
    SDValue mergeInsertEltWithShuffle(SDNode *N, unsigned InsIndex);
    SDValue combineInsertEltToShuffle(SDNode *N, unsigned InsIndex);
    SDValue combineInsertEltToLoad(SDNode *N, unsigned InsIndex);
    SDValue ConstantFoldBITCASTofBUILD_VECTOR(SDNode *, EVT);
    SDValue BuildSDIV(SDNode *N);
    SDValue BuildSDIVPow2(SDNode *N);
    SDValue BuildUDIV(SDNode *N);
    SDValue BuildSREMPow2(SDNode *N);
    SDValue buildOptimizedSREM(SDValue N0, SDValue N1, SDNode *N);
    SDValue BuildLogBase2(SDValue V, const SDLoc &DL,
                          bool KnownNeverZero = false,
                          bool InexpensiveOnly = false,
                          std::optional<EVT> OutVT = std::nullopt);
    SDValue BuildDivEstimate(SDValue N, SDValue Op, SDNodeFlags Flags);
    SDValue buildRsqrtEstimate(SDValue Op, SDNodeFlags Flags);
    SDValue buildSqrtEstimate(SDValue Op, SDNodeFlags Flags);
    SDValue buildSqrtEstimateImpl(SDValue Op, SDNodeFlags Flags, bool Recip);
    SDValue buildSqrtNROneConst(SDValue Arg, SDValue Est, unsigned Iterations,
                                SDNodeFlags Flags, bool Reciprocal);
    SDValue buildSqrtNRTwoConst(SDValue Arg, SDValue Est, unsigned Iterations,
                                SDNodeFlags Flags, bool Reciprocal);
    SDValue MatchBSwapHWordLow(SDNode *N, SDValue N0, SDValue N1,
                               bool DemandHighBits = true);
    SDValue MatchBSwapHWord(SDNode *N, SDValue N0, SDValue N1);
    SDValue MatchRotatePosNeg(SDValue Shifted, SDValue Pos, SDValue Neg,
                              SDValue InnerPos, SDValue InnerNeg, bool HasPos,
                              unsigned PosOpcode, unsigned NegOpcode,
                              const SDLoc &DL);
    SDValue MatchFunnelPosNeg(SDValue N0, SDValue N1, SDValue Pos, SDValue Neg,
                              SDValue InnerPos, SDValue InnerNeg, bool HasPos,
                              unsigned PosOpcode, unsigned NegOpcode,
                              const SDLoc &DL);
    SDValue MatchRotate(SDValue LHS, SDValue RHS, const SDLoc &DL);
    SDValue MatchLoadCombine(SDNode *N);
    SDValue mergeTruncStores(StoreSDNode *N);
    SDValue reduceLoadWidth(SDNode *N);
    SDValue ReduceLoadOpStoreWidth(SDNode *N);
    SDValue splitMergedValStore(StoreSDNode *ST);
    SDValue TransformFPLoadStorePair(SDNode *N);
    SDValue convertBuildVecZextToZext(SDNode *N);
    SDValue convertBuildVecZextToBuildVecWithZeros(SDNode *N);
    SDValue reduceBuildVecExtToExtBuildVec(SDNode *N);
    SDValue reduceBuildVecTruncToBitCast(SDNode *N);
    SDValue reduceBuildVecToShuffle(SDNode *N);
    SDValue createBuildVecShuffle(const SDLoc &DL, SDNode *N,
                                  ArrayRef<int> VectorMask, SDValue VecIn1,
                                  SDValue VecIn2, unsigned LeftIdx,
                                  bool DidSplitVec);
    SDValue matchVSelectOpSizesWithSetCC(SDNode *Cast);

    /// Walk up chain skipping non-aliasing memory nodes,
    /// looking for aliasing nodes and adding them to the Aliases vector.
    void GatherAllAliases(SDNode *N, SDValue OriginalChain,
                          SmallVectorImpl<SDValue> &Aliases);

    /// Return true if there is any possibility that the two addresses overlap.
    bool mayAlias(SDNode *Op0, SDNode *Op1) const;

    /// Walk up chain skipping non-aliasing memory nodes, looking for a better
    /// chain (aliasing node.)
    SDValue FindBetterChain(SDNode *N, SDValue Chain);

    /// Try to replace a store and any possibly adjacent stores on
    /// consecutive chains with better chains. Return true only if St is
    /// replaced.
    ///
    /// Notice that other chains may still be replaced even if the function
    /// returns false.
    bool findBetterNeighborChains(StoreSDNode *St);

    // Helper for findBetterNeighborChains. Walk up store chain add additional
    // chained stores that do not overlap and can be parallelized.
    bool parallelizeChainedStores(StoreSDNode *St);

    /// Holds a pointer to an LSBaseSDNode as well as information on where it
    /// is located in a sequence of memory operations connected by a chain.
    struct MemOpLink {
      // Ptr to the mem node.
      LSBaseSDNode *MemNode;

      // Offset from the base ptr.
      int64_t OffsetFromBase;

      MemOpLink(LSBaseSDNode *N, int64_t Offset)
          : MemNode(N), OffsetFromBase(Offset) {}
    };

    // Classify the origin of a stored value.
    enum class StoreSource { Unknown, Constant, Extract, Load };
    StoreSource getStoreSource(SDValue StoreVal) {
      switch (StoreVal.getOpcode()) {
      case ISD::Constant:
      case ISD::ConstantFP:
        return StoreSource::Constant;
      case ISD::BUILD_VECTOR:
        if (ISD::isBuildVectorOfConstantSDNodes(StoreVal.getNode()) ||
            ISD::isBuildVectorOfConstantFPSDNodes(StoreVal.getNode()))
          return StoreSource::Constant;
        return StoreSource::Unknown;
      case ISD::EXTRACT_VECTOR_ELT:
      case ISD::EXTRACT_SUBVECTOR:
        return StoreSource::Extract;
      case ISD::LOAD:
        return StoreSource::Load;
      default:
        return StoreSource::Unknown;
      }
    }

    /// This is a helper function for visitMUL to check the profitability
    /// of folding (mul (add x, c1), c2) -> (add (mul x, c2), c1*c2).
    /// MulNode is the original multiply, AddNode is (add x, c1),
    /// and ConstNode is c2.
    bool isMulAddWithConstProfitable(SDNode *MulNode, SDValue AddNode,
                                     SDValue ConstNode);

    /// This is a helper function for visitAND and visitZERO_EXTEND.  Returns
    /// true if the (and (load x) c) pattern matches an extload.  ExtVT returns
    /// the type of the loaded value to be extended.
    bool isAndLoadExtLoad(ConstantSDNode *AndC, LoadSDNode *LoadN,
                          EVT LoadResultTy, EVT &ExtVT);

    /// Helper function to calculate whether the given Load/Store can have its
    /// width reduced to ExtVT.
    bool isLegalNarrowLdSt(LSBaseSDNode *LDSTN, ISD::LoadExtType ExtType,
                           EVT &MemVT, unsigned ShAmt = 0);

    /// Used by BackwardsPropagateMask to find suitable loads.
    bool SearchForAndLoads(SDNode *N, SmallVectorImpl<LoadSDNode*> &Loads,
                           SmallPtrSetImpl<SDNode*> &NodesWithConsts,
                           ConstantSDNode *Mask, SDNode *&NodeToMask);
    /// Attempt to propagate a given AND node back to load leaves so that they
    /// can be combined into narrow loads.
    bool BackwardsPropagateMask(SDNode *N);

    /// Helper function for mergeConsecutiveStores which merges the component
    /// store chains.
    SDValue getMergeStoreChains(SmallVectorImpl<MemOpLink> &StoreNodes,
                                unsigned NumStores);

    /// Helper function for mergeConsecutiveStores which checks if all the store
    /// nodes have the same underlying object. We can still reuse the first
    /// store's pointer info if all the stores are from the same object.
    bool hasSameUnderlyingObj(ArrayRef<MemOpLink> StoreNodes);

    /// This is a helper function for mergeConsecutiveStores. When the source
    /// elements of the consecutive stores are all constants or all extracted
    /// vector elements, try to merge them into one larger store introducing
    /// bitcasts if necessary.  \return True if a merged store was created.
    bool mergeStoresOfConstantsOrVecElts(SmallVectorImpl<MemOpLink> &StoreNodes,
                                         EVT MemVT, unsigned NumStores,
                                         bool IsConstantSrc, bool UseVector,
                                         bool UseTrunc);

    /// This is a helper function for mergeConsecutiveStores. Stores that
    /// potentially may be merged with St are placed in StoreNodes. On success,
    /// returns a chain predecessor to all store candidates.
    SDNode *getStoreMergeCandidates(StoreSDNode *St,
                                    SmallVectorImpl<MemOpLink> &StoreNodes);

    /// Helper function for mergeConsecutiveStores. Checks if candidate stores
    /// have indirect dependency through their operands. RootNode is the
    /// predecessor to all stores calculated by getStoreMergeCandidates and is
    /// used to prune the dependency check. \return True if safe to merge.
    bool checkMergeStoreCandidatesForDependencies(
        SmallVectorImpl<MemOpLink> &StoreNodes, unsigned NumStores,
        SDNode *RootNode);

    /// This is a helper function for mergeConsecutiveStores. Given a list of
    /// store candidates, find the first N that are consecutive in memory.
    /// Returns 0 if there are not at least 2 consecutive stores to try merging.
    unsigned getConsecutiveStores(SmallVectorImpl<MemOpLink> &StoreNodes,
                                  int64_t ElementSizeBytes) const;

    /// This is a helper function for mergeConsecutiveStores. It is used for
    /// store chains that are composed entirely of constant values.
    bool tryStoreMergeOfConstants(SmallVectorImpl<MemOpLink> &StoreNodes,
                                  unsigned NumConsecutiveStores,
                                  EVT MemVT, SDNode *Root, bool AllowVectors);

    /// This is a helper function for mergeConsecutiveStores. It is used for
    /// store chains that are composed entirely of extracted vector elements.
    /// When extracting multiple vector elements, try to store them in one
    /// vector store rather than a sequence of scalar stores.
    bool tryStoreMergeOfExtracts(SmallVectorImpl<MemOpLink> &StoreNodes,
                                 unsigned NumConsecutiveStores, EVT MemVT,
                                 SDNode *Root);

    /// This is a helper function for mergeConsecutiveStores. It is used for
    /// store chains that are composed entirely of loaded values.
    bool tryStoreMergeOfLoads(SmallVectorImpl<MemOpLink> &StoreNodes,
                              unsigned NumConsecutiveStores, EVT MemVT,
                              SDNode *Root, bool AllowVectors,
                              bool IsNonTemporalStore, bool IsNonTemporalLoad);

    /// Merge consecutive store operations into a wide store.
    /// This optimization uses wide integers or vectors when possible.
    /// \return true if stores were merged.
    bool mergeConsecutiveStores(StoreSDNode *St);

    /// Try to transform a truncation where C is a constant:
    ///     (trunc (and X, C)) -> (and (trunc X), (trunc C))
    ///
    /// \p N needs to be a truncation and its first operand an AND. Other
    /// requirements are checked by the function (e.g. that trunc is
    /// single-use) and if missed an empty SDValue is returned.
    SDValue distributeTruncateThroughAnd(SDNode *N);

    /// Helper function to determine whether the target supports operation
    /// given by \p Opcode for type \p VT, that is, whether the operation
    /// is legal or custom before legalizing operations, and whether is
    /// legal (but not custom) after legalization.
    bool hasOperation(unsigned Opcode, EVT VT) {
      return TLI.isOperationLegalOrCustom(Opcode, VT, LegalOperations);
    }

  public:
    /// Runs the dag combiner on all nodes in the work list
    void Run(CombineLevel AtLevel);

    SelectionDAG &getDAG() const { return DAG; }

    /// Convenience wrapper around TargetLowering::getShiftAmountTy.
    EVT getShiftAmountTy(EVT LHSTy) {
      return TLI.getShiftAmountTy(LHSTy, DAG.getDataLayout());
    }

    /// This method returns true if we are running before type legalization or
    /// if the specified VT is legal.
    bool isTypeLegal(const EVT &VT) {
      if (!LegalTypes) return true;
      return TLI.isTypeLegal(VT);
    }

    /// Convenience wrapper around TargetLowering::getSetCCResultType
    EVT getSetCCResultType(EVT VT) const {
      return TLI.getSetCCResultType(DAG.getDataLayout(), *DAG.getContext(), VT);
    }

    void ExtendSetCCUses(const SmallVectorImpl<SDNode *> &SetCCs,
                         SDValue OrigLoad, SDValue ExtLoad,
                         ISD::NodeType ExtType);
  };

/// This class is a DAGUpdateListener that removes any deleted
/// nodes from the worklist.
class WorklistRemover : public SelectionDAG::DAGUpdateListener {
  DAGCombiner &DC;

public:
  explicit WorklistRemover(DAGCombiner &dc)
    : SelectionDAG::DAGUpdateListener(dc.getDAG()), DC(dc) {}

  void NodeDeleted(SDNode *N, SDNode *E) override {
    DC.removeFromWorklist(N);
  }
};

class WorklistInserter : public SelectionDAG::DAGUpdateListener {
  DAGCombiner &DC;

public:
  explicit WorklistInserter(DAGCombiner &dc)
      : SelectionDAG::DAGUpdateListener(dc.getDAG()), DC(dc) {}

  // FIXME: Ideally we could add N to the worklist, but this causes exponential
  //        compile time costs in large DAGs, e.g. Halide.
  void NodeInserted(SDNode *N) override { DC.ConsiderForPruning(N); }
};

} // end anonymous namespace

//===----------------------------------------------------------------------===//
//  TargetLowering::DAGCombinerInfo implementation
//===----------------------------------------------------------------------===//

void TargetLowering::DAGCombinerInfo::AddToWorklist(SDNode *N) {
  ((DAGCombiner*)DC)->AddToWorklist(N);
}

SDValue TargetLowering::DAGCombinerInfo::
CombineTo(SDNode *N, ArrayRef<SDValue> To, bool AddTo) {
  return ((DAGCombiner*)DC)->CombineTo(N, &To[0], To.size(), AddTo);
}

SDValue TargetLowering::DAGCombinerInfo::
CombineTo(SDNode *N, SDValue Res, bool AddTo) {
  return ((DAGCombiner*)DC)->CombineTo(N, Res, AddTo);
}

SDValue TargetLowering::DAGCombinerInfo::
CombineTo(SDNode *N, SDValue Res0, SDValue Res1, bool AddTo) {
  return ((DAGCombiner*)DC)->CombineTo(N, Res0, Res1, AddTo);
}

bool TargetLowering::DAGCombinerInfo::
recursivelyDeleteUnusedNodes(SDNode *N) {
  return ((DAGCombiner*)DC)->recursivelyDeleteUnusedNodes(N);
}

void TargetLowering::DAGCombinerInfo::
CommitTargetLoweringOpt(const TargetLowering::TargetLoweringOpt &TLO) {
  return ((DAGCombiner*)DC)->CommitTargetLoweringOpt(TLO);
}

//===----------------------------------------------------------------------===//
// Helper Functions
//===----------------------------------------------------------------------===//

void DAGCombiner::deleteAndRecombine(SDNode *N) {
  removeFromWorklist(N);

  // If the operands of this node are only used by the node, they will now be
  // dead. Make sure to re-visit them and recursively delete dead nodes.
  for (const SDValue &Op : N->ops())
    // For an operand generating multiple values, one of the values may
    // become dead allowing further simplification (e.g. split index
    // arithmetic from an indexed load).
    if (Op->hasOneUse() || Op->getNumValues() > 1)
      AddToWorklist(Op.getNode());

  DAG.DeleteNode(N);
}

// APInts must be the same size for most operations, this helper
// function zero extends the shorter of the pair so that they match.
// We provide an Offset so that we can create bitwidths that won't overflow.
static void zeroExtendToMatch(APInt &LHS, APInt &RHS, unsigned Offset = 0) {
  unsigned Bits = Offset + std::max(LHS.getBitWidth(), RHS.getBitWidth());
  LHS = LHS.zext(Bits);
  RHS = RHS.zext(Bits);
}

// Return true if this node is a setcc, or is a select_cc
// that selects between the target values used for true and false, making it
// equivalent to a setcc. Also, set the incoming LHS, RHS, and CC references to
// the appropriate nodes based on the type of node we are checking. This
// simplifies life a bit for the callers.
bool DAGCombiner::isSetCCEquivalent(SDValue N, SDValue &LHS, SDValue &RHS,
                                    SDValue &CC, bool MatchStrict) const {
  if (N.getOpcode() == ISD::SETCC) {
    LHS = N.getOperand(0);
    RHS = N.getOperand(1);
    CC  = N.getOperand(2);
    return true;
  }

  if (MatchStrict &&
      (N.getOpcode() == ISD::STRICT_FSETCC ||
       N.getOpcode() == ISD::STRICT_FSETCCS)) {
    LHS = N.getOperand(1);
    RHS = N.getOperand(2);
    CC  = N.getOperand(3);
    return true;
  }

  if (N.getOpcode() != ISD::SELECT_CC || !TLI.isConstTrueVal(N.getOperand(2)) ||
      !TLI.isConstFalseVal(N.getOperand(3)))
    return false;

  if (TLI.getBooleanContents(N.getValueType()) ==
      TargetLowering::UndefinedBooleanContent)
    return false;

  LHS = N.getOperand(0);
  RHS = N.getOperand(1);
  CC  = N.getOperand(4);
  return true;
}

/// Return true if this is a SetCC-equivalent operation with only one use.
/// If this is true, it allows the users to invert the operation for free when
/// it is profitable to do so.
bool DAGCombiner::isOneUseSetCC(SDValue N) const {
  SDValue N0, N1, N2;
  if (isSetCCEquivalent(N, N0, N1, N2) && N->hasOneUse())
    return true;
  return false;
}

static bool isConstantSplatVectorMaskForType(SDNode *N, EVT ScalarTy) {
  if (!ScalarTy.isSimple())
    return false;

  uint64_t MaskForTy = 0ULL;
  switch (ScalarTy.getSimpleVT().SimpleTy) {
  case MVT::i8:
    MaskForTy = 0xFFULL;
    break;
  case MVT::i16:
    MaskForTy = 0xFFFFULL;
    break;
  case MVT::i32:
    MaskForTy = 0xFFFFFFFFULL;
    break;
  default:
    return false;
    break;
  }

  APInt Val;
  if (ISD::isConstantSplatVector(N, Val))
    return Val.getLimitedValue() == MaskForTy;

  return false;
}

// Determines if it is a constant integer or a splat/build vector of constant
// integers (and undefs).
// Do not permit build vector implicit truncation.
static bool isConstantOrConstantVector(SDValue N, bool NoOpaques = false) {
  if (ConstantSDNode *Const = dyn_cast<ConstantSDNode>(N))
    return !(Const->isOpaque() && NoOpaques);
  if (N.getOpcode() != ISD::BUILD_VECTOR && N.getOpcode() != ISD::SPLAT_VECTOR)
    return false;
  unsigned BitWidth = N.getScalarValueSizeInBits();
  for (const SDValue &Op : N->op_values()) {
    if (Op.isUndef())
      continue;
    ConstantSDNode *Const = dyn_cast<ConstantSDNode>(Op);
    if (!Const || Const->getAPIntValue().getBitWidth() != BitWidth ||
        (Const->isOpaque() && NoOpaques))
      return false;
  }
  return true;
}

// Determines if a BUILD_VECTOR is composed of all-constants possibly mixed with
// undef's.
static bool isAnyConstantBuildVector(SDValue V, bool NoOpaques = false) {
  if (V.getOpcode() != ISD::BUILD_VECTOR)
    return false;
  return isConstantOrConstantVector(V, NoOpaques) ||
         ISD::isBuildVectorOfConstantFPSDNodes(V.getNode());
}

// Determine if this an indexed load with an opaque target constant index.
static bool canSplitIdx(LoadSDNode *LD) {
  return MaySplitLoadIndex &&
         (LD->getOperand(2).getOpcode() != ISD::TargetConstant ||
          !cast<ConstantSDNode>(LD->getOperand(2))->isOpaque());
}

bool DAGCombiner::reassociationCanBreakAddressingModePattern(unsigned Opc,
                                                             const SDLoc &DL,
                                                             SDNode *N,
                                                             SDValue N0,
                                                             SDValue N1) {
  // Currently this only tries to ensure we don't undo the GEP splits done by
  // CodeGenPrepare when shouldConsiderGEPOffsetSplit is true. To ensure this,
  // we check if the following transformation would be problematic:
  // (load/store (add, (add, x, offset1), offset2)) ->
  // (load/store (add, x, offset1+offset2)).

  // (load/store (add, (add, x, y), offset2)) ->
  // (load/store (add, (add, x, offset2), y)).

  if (N0.getOpcode() != ISD::ADD)
    return false;

  // Check for vscale addressing modes.
  // (load/store (add/sub (add x, y), vscale))
  // (load/store (add/sub (add x, y), (lsl vscale, C)))
  // (load/store (add/sub (add x, y), (mul vscale, C)))
  if ((N1.getOpcode() == ISD::VSCALE ||
       ((N1.getOpcode() == ISD::SHL || N1.getOpcode() == ISD::MUL) &&
        N1.getOperand(0).getOpcode() == ISD::VSCALE &&
        isa<ConstantSDNode>(N1.getOperand(1)))) &&
      N1.getValueType().getFixedSizeInBits() <= 64) {
    int64_t ScalableOffset = N1.getOpcode() == ISD::VSCALE
                                 ? N1.getConstantOperandVal(0)
                                 : (N1.getOperand(0).getConstantOperandVal(0) *
                                    (N1.getOpcode() == ISD::SHL
                                         ? (1LL << N1.getConstantOperandVal(1))
                                         : N1.getConstantOperandVal(1)));
    if (Opc == ISD::SUB)
      ScalableOffset = -ScalableOffset;
    if (all_of(N->uses(), [&](SDNode *Node) {
          if (auto *LoadStore = dyn_cast<MemSDNode>(Node);
              LoadStore && LoadStore->getBasePtr().getNode() == N) {
            TargetLoweringBase::AddrMode AM;
            AM.HasBaseReg = true;
            AM.ScalableOffset = ScalableOffset;
            EVT VT = LoadStore->getMemoryVT();
            unsigned AS = LoadStore->getAddressSpace();
            Type *AccessTy = VT.getTypeForEVT(*DAG.getContext());
            return TLI.isLegalAddressingMode(DAG.getDataLayout(), AM, AccessTy,
                                             AS);
          }
          return false;
        }))
      return true;
  }

  if (Opc != ISD::ADD)
    return false;

  auto *C2 = dyn_cast<ConstantSDNode>(N1);
  if (!C2)
    return false;

  const APInt &C2APIntVal = C2->getAPIntValue();
  if (C2APIntVal.getSignificantBits() > 64)
    return false;

  if (auto *C1 = dyn_cast<ConstantSDNode>(N0.getOperand(1))) {
    if (N0.hasOneUse())
      return false;

    const APInt &C1APIntVal = C1->getAPIntValue();
    const APInt CombinedValueIntVal = C1APIntVal + C2APIntVal;
    if (CombinedValueIntVal.getSignificantBits() > 64)
      return false;
    const int64_t CombinedValue = CombinedValueIntVal.getSExtValue();

    for (SDNode *Node : N->uses()) {
      if (auto *LoadStore = dyn_cast<MemSDNode>(Node)) {
        // Is x[offset2] already not a legal addressing mode? If so then
        // reassociating the constants breaks nothing (we test offset2 because
        // that's the one we hope to fold into the load or store).
        TargetLoweringBase::AddrMode AM;
        AM.HasBaseReg = true;
        AM.BaseOffs = C2APIntVal.getSExtValue();
        EVT VT = LoadStore->getMemoryVT();
        unsigned AS = LoadStore->getAddressSpace();
        Type *AccessTy = VT.getTypeForEVT(*DAG.getContext());
        if (!TLI.isLegalAddressingMode(DAG.getDataLayout(), AM, AccessTy, AS))
          continue;

        // Would x[offset1+offset2] still be a legal addressing mode?
        AM.BaseOffs = CombinedValue;
        if (!TLI.isLegalAddressingMode(DAG.getDataLayout(), AM, AccessTy, AS))
          return true;
      }
    }
  } else {
    if (auto *GA = dyn_cast<GlobalAddressSDNode>(N0.getOperand(1)))
      if (GA->getOpcode() == ISD::GlobalAddress && TLI.isOffsetFoldingLegal(GA))
        return false;

    for (SDNode *Node : N->uses()) {
      auto *LoadStore = dyn_cast<MemSDNode>(Node);
      if (!LoadStore)
        return false;

      // Is x[offset2] a legal addressing mode? If so then
      // reassociating the constants breaks address pattern
      TargetLoweringBase::AddrMode AM;
      AM.HasBaseReg = true;
      AM.BaseOffs = C2APIntVal.getSExtValue();
      EVT VT = LoadStore->getMemoryVT();
      unsigned AS = LoadStore->getAddressSpace();
      Type *AccessTy = VT.getTypeForEVT(*DAG.getContext());
      if (!TLI.isLegalAddressingMode(DAG.getDataLayout(), AM, AccessTy, AS))
        return false;
    }
    return true;
  }

  return false;
}

/// Helper for DAGCombiner::reassociateOps. Try to reassociate (Opc N0, N1) if
/// \p N0 is the same kind of operation as \p Opc.
SDValue DAGCombiner::reassociateOpsCommutative(unsigned Opc, const SDLoc &DL,
                                               SDValue N0, SDValue N1,
                                               SDNodeFlags Flags) {
  EVT VT = N0.getValueType();

  if (N0.getOpcode() != Opc)
    return SDValue();

  SDValue N00 = N0.getOperand(0);
  SDValue N01 = N0.getOperand(1);

  if (DAG.isConstantIntBuildVectorOrConstantInt(N01)) {
    SDNodeFlags NewFlags;
    if (N0.getOpcode() == ISD::ADD && N0->getFlags().hasNoUnsignedWrap() &&
        Flags.hasNoUnsignedWrap())
      NewFlags |= SDNodeFlags::NoUnsignedWrap;

    if (DAG.isConstantIntBuildVectorOrConstantInt(N1)) {
      // Reassociate: (op (op x, c1), c2) -> (op x, (op c1, c2))
      if (SDValue OpNode = DAG.FoldConstantArithmetic(Opc, DL, VT, {N01, N1})) {
        NewFlags.setDisjoint(Flags.hasDisjoint() &&
                             N0->getFlags().hasDisjoint());
        return DAG.getNode(Opc, DL, VT, N00, OpNode, NewFlags);
      }
      return SDValue();
    }
    if (TLI.isReassocProfitable(DAG, N0, N1)) {
      // Reassociate: (op (op x, c1), y) -> (op (op x, y), c1)
      //              iff (op x, c1) has one use
      SDValue OpNode = DAG.getNode(Opc, SDLoc(N0), VT, N00, N1, NewFlags);
      return DAG.getNode(Opc, DL, VT, OpNode, N01, NewFlags);
    }
  }

  // Check for repeated operand logic simplifications.
  if (Opc == ISD::AND || Opc == ISD::OR) {
    // (N00 & N01) & N00 --> N00 & N01
    // (N00 & N01) & N01 --> N00 & N01
    // (N00 | N01) | N00 --> N00 | N01
    // (N00 | N01) | N01 --> N00 | N01
    if (N1 == N00 || N1 == N01)
      return N0;
  }
  if (Opc == ISD::XOR) {
    // (N00 ^ N01) ^ N00 --> N01
    if (N1 == N00)
      return N01;
    // (N00 ^ N01) ^ N01 --> N00
    if (N1 == N01)
      return N00;
  }

  if (TLI.isReassocProfitable(DAG, N0, N1)) {
    if (N1 != N01) {
      // Reassociate if (op N00, N1) already exist
      if (SDNode *NE = DAG.getNodeIfExists(Opc, DAG.getVTList(VT), {N00, N1})) {
        // if Op (Op N00, N1), N01 already exist
        // we need to stop reassciate to avoid dead loop
        if (!DAG.doesNodeExist(Opc, DAG.getVTList(VT), {SDValue(NE, 0), N01}))
          return DAG.getNode(Opc, DL, VT, SDValue(NE, 0), N01);
      }
    }

    if (N1 != N00) {
      // Reassociate if (op N01, N1) already exist
      if (SDNode *NE = DAG.getNodeIfExists(Opc, DAG.getVTList(VT), {N01, N1})) {
        // if Op (Op N01, N1), N00 already exist
        // we need to stop reassciate to avoid dead loop
        if (!DAG.doesNodeExist(Opc, DAG.getVTList(VT), {SDValue(NE, 0), N00}))
          return DAG.getNode(Opc, DL, VT, SDValue(NE, 0), N00);
      }
    }

    // Reassociate the operands from (OR/AND (OR/AND(N00, N001)), N1) to (OR/AND
    // (OR/AND(N00, N1)), N01) when N00 and N1 are comparisons with the same
    // predicate or to (OR/AND (OR/AND(N1, N01)), N00) when N01 and N1 are
    // comparisons with the same predicate. This enables optimizations as the
    // following one:
    // CMP(A,C)||CMP(B,C) => CMP(MIN/MAX(A,B), C)
    // CMP(A,C)&&CMP(B,C) => CMP(MIN/MAX(A,B), C)
    if (Opc == ISD::AND || Opc == ISD::OR) {
      if (N1->getOpcode() == ISD::SETCC && N00->getOpcode() == ISD::SETCC &&
          N01->getOpcode() == ISD::SETCC) {
        ISD::CondCode CC1 = cast<CondCodeSDNode>(N1.getOperand(2))->get();
        ISD::CondCode CC00 = cast<CondCodeSDNode>(N00.getOperand(2))->get();
        ISD::CondCode CC01 = cast<CondCodeSDNode>(N01.getOperand(2))->get();
        if (CC1 == CC00 && CC1 != CC01) {
          SDValue OpNode = DAG.getNode(Opc, SDLoc(N0), VT, N00, N1, Flags);
          return DAG.getNode(Opc, DL, VT, OpNode, N01, Flags);
        }
        if (CC1 == CC01 && CC1 != CC00) {
          SDValue OpNode = DAG.getNode(Opc, SDLoc(N0), VT, N01, N1, Flags);
          return DAG.getNode(Opc, DL, VT, OpNode, N00, Flags);
        }
      }
    }
  }

  return SDValue();
}

/// Try to reassociate commutative (Opc N0, N1) if either \p N0 or \p N1 is the
/// same kind of operation as \p Opc.
SDValue DAGCombiner::reassociateOps(unsigned Opc, const SDLoc &DL, SDValue N0,
                                    SDValue N1, SDNodeFlags Flags) {
  assert(TLI.isCommutativeBinOp(Opc) && "Operation not commutative.");

  // Floating-point reassociation is not allowed without loose FP math.
  if (N0.getValueType().isFloatingPoint() ||
      N1.getValueType().isFloatingPoint())
    if (!Flags.hasAllowReassociation() || !Flags.hasNoSignedZeros())
      return SDValue();

  if (SDValue Combined = reassociateOpsCommutative(Opc, DL, N0, N1, Flags))
    return Combined;
  if (SDValue Combined = reassociateOpsCommutative(Opc, DL, N1, N0, Flags))
    return Combined;
  return SDValue();
}

// Try to fold Opc(vecreduce(x), vecreduce(y)) -> vecreduce(Opc(x, y))
// Note that we only expect Flags to be passed from FP operations. For integer
// operations they need to be dropped.
SDValue DAGCombiner::reassociateReduction(unsigned RedOpc, unsigned Opc,
                                          const SDLoc &DL, EVT VT, SDValue N0,
                                          SDValue N1, SDNodeFlags Flags) {
  if (N0.getOpcode() == RedOpc && N1.getOpcode() == RedOpc &&
      N0.getOperand(0).getValueType() == N1.getOperand(0).getValueType() &&
      N0->hasOneUse() && N1->hasOneUse() &&
      TLI.isOperationLegalOrCustom(Opc, N0.getOperand(0).getValueType()) &&
      TLI.shouldReassociateReduction(RedOpc, N0.getOperand(0).getValueType())) {
    SelectionDAG::FlagInserter FlagsInserter(DAG, Flags);
    return DAG.getNode(RedOpc, DL, VT,
                       DAG.getNode(Opc, DL, N0.getOperand(0).getValueType(),
                                   N0.getOperand(0), N1.getOperand(0)));
  }
  return SDValue();
}

SDValue DAGCombiner::CombineTo(SDNode *N, const SDValue *To, unsigned NumTo,
                               bool AddTo) {
  assert(N->getNumValues() == NumTo && "Broken CombineTo call!");
  ++NodesCombined;
  LLVM_DEBUG(dbgs() << "\nReplacing.1 "; N->dump(&DAG); dbgs() << "\nWith: ";
             To[0].dump(&DAG);
             dbgs() << " and " << NumTo - 1 << " other values\n");
  for (unsigned i = 0, e = NumTo; i != e; ++i)
    assert((!To[i].getNode() ||
            N->getValueType(i) == To[i].getValueType()) &&
           "Cannot combine value to value of different type!");

  WorklistRemover DeadNodes(*this);
  DAG.ReplaceAllUsesWith(N, To);
  if (AddTo) {
    // Push the new nodes and any users onto the worklist
    for (unsigned i = 0, e = NumTo; i != e; ++i) {
      if (To[i].getNode())
        AddToWorklistWithUsers(To[i].getNode());
    }
  }

  // Finally, if the node is now dead, remove it from the graph.  The node
  // may not be dead if the replacement process recursively simplified to
  // something else needing this node.
  if (N->use_empty())
    deleteAndRecombine(N);
  return SDValue(N, 0);
}

void DAGCombiner::
CommitTargetLoweringOpt(const TargetLowering::TargetLoweringOpt &TLO) {
  // Replace the old value with the new one.
  ++NodesCombined;
  LLVM_DEBUG(dbgs() << "\nReplacing.2 "; TLO.Old.dump(&DAG);
             dbgs() << "\nWith: "; TLO.New.dump(&DAG); dbgs() << '\n');

  // Replace all uses.
  DAG.ReplaceAllUsesOfValueWith(TLO.Old, TLO.New);

  // Push the new node and any (possibly new) users onto the worklist.
  AddToWorklistWithUsers(TLO.New.getNode());

  // Finally, if the node is now dead, remove it from the graph.
  recursivelyDeleteUnusedNodes(TLO.Old.getNode());
}

/// Check the specified integer node value to see if it can be simplified or if
/// things it uses can be simplified by bit propagation. If so, return true.
bool DAGCombiner::SimplifyDemandedBits(SDValue Op, const APInt &DemandedBits,
                                       const APInt &DemandedElts,
                                       bool AssumeSingleUse) {
  TargetLowering::TargetLoweringOpt TLO(DAG, LegalTypes, LegalOperations);
  KnownBits Known;
  if (!TLI.SimplifyDemandedBits(Op, DemandedBits, DemandedElts, Known, TLO, 0,
                                AssumeSingleUse))
    return false;

  // Revisit the node.
  AddToWorklist(Op.getNode());

  CommitTargetLoweringOpt(TLO);
  return true;
}

/// Check the specified vector node value to see if it can be simplified or
/// if things it uses can be simplified as it only uses some of the elements.
/// If so, return true.
bool DAGCombiner::SimplifyDemandedVectorElts(SDValue Op,
                                             const APInt &DemandedElts,
                                             bool AssumeSingleUse) {
  TargetLowering::TargetLoweringOpt TLO(DAG, LegalTypes, LegalOperations);
  APInt KnownUndef, KnownZero;
  if (!TLI.SimplifyDemandedVectorElts(Op, DemandedElts, KnownUndef, KnownZero,
                                      TLO, 0, AssumeSingleUse))
    return false;

  // Revisit the node.
  AddToWorklist(Op.getNode());

  CommitTargetLoweringOpt(TLO);
  return true;
}

void DAGCombiner::ReplaceLoadWithPromotedLoad(SDNode *Load, SDNode *ExtLoad) {
  SDLoc DL(Load);
  EVT VT = Load->getValueType(0);
  SDValue Trunc = DAG.getNode(ISD::TRUNCATE, DL, VT, SDValue(ExtLoad, 0));

  LLVM_DEBUG(dbgs() << "\nReplacing.9 "; Load->dump(&DAG); dbgs() << "\nWith: ";
             Trunc.dump(&DAG); dbgs() << '\n');

  DAG.ReplaceAllUsesOfValueWith(SDValue(Load, 0), Trunc);
  DAG.ReplaceAllUsesOfValueWith(SDValue(Load, 1), SDValue(ExtLoad, 1));

  AddToWorklist(Trunc.getNode());
  recursivelyDeleteUnusedNodes(Load);
}

SDValue DAGCombiner::PromoteOperand(SDValue Op, EVT PVT, bool &Replace) {
  Replace = false;
  SDLoc DL(Op);
  if (ISD::isUNINDEXEDLoad(Op.getNode())) {
    LoadSDNode *LD = cast<LoadSDNode>(Op);
    EVT MemVT = LD->getMemoryVT();
    ISD::LoadExtType ExtType = ISD::isNON_EXTLoad(LD) ? ISD::EXTLOAD
                                                      : LD->getExtensionType();
    Replace = true;
    return DAG.getExtLoad(ExtType, DL, PVT,
                          LD->getChain(), LD->getBasePtr(),
                          MemVT, LD->getMemOperand());
  }

  unsigned Opc = Op.getOpcode();
  switch (Opc) {
  default: break;
  case ISD::AssertSext:
    if (SDValue Op0 = SExtPromoteOperand(Op.getOperand(0), PVT))
      return DAG.getNode(ISD::AssertSext, DL, PVT, Op0, Op.getOperand(1));
    break;
  case ISD::AssertZext:
    if (SDValue Op0 = ZExtPromoteOperand(Op.getOperand(0), PVT))
      return DAG.getNode(ISD::AssertZext, DL, PVT, Op0, Op.getOperand(1));
    break;
  case ISD::Constant: {
    unsigned ExtOpc =
      Op.getValueType().isByteSized() ? ISD::SIGN_EXTEND : ISD::ZERO_EXTEND;
    return DAG.getNode(ExtOpc, DL, PVT, Op);
  }
  }

  if (!TLI.isOperationLegal(ISD::ANY_EXTEND, PVT))
    return SDValue();
  return DAG.getNode(ISD::ANY_EXTEND, DL, PVT, Op);
}

SDValue DAGCombiner::SExtPromoteOperand(SDValue Op, EVT PVT) {
  if (!TLI.isOperationLegal(ISD::SIGN_EXTEND_INREG, PVT))
    return SDValue();
  EVT OldVT = Op.getValueType();
  SDLoc DL(Op);
  bool Replace = false;
  SDValue NewOp = PromoteOperand(Op, PVT, Replace);
  if (!NewOp.getNode())
    return SDValue();
  AddToWorklist(NewOp.getNode());

  if (Replace)
    ReplaceLoadWithPromotedLoad(Op.getNode(), NewOp.getNode());
  return DAG.getNode(ISD::SIGN_EXTEND_INREG, DL, NewOp.getValueType(), NewOp,
                     DAG.getValueType(OldVT));
}

SDValue DAGCombiner::ZExtPromoteOperand(SDValue Op, EVT PVT) {
  EVT OldVT = Op.getValueType();
  SDLoc DL(Op);
  bool Replace = false;
  SDValue NewOp = PromoteOperand(Op, PVT, Replace);
  if (!NewOp.getNode())
    return SDValue();
  AddToWorklist(NewOp.getNode());

  if (Replace)
    ReplaceLoadWithPromotedLoad(Op.getNode(), NewOp.getNode());
  return DAG.getZeroExtendInReg(NewOp, DL, OldVT);
}

/// Promote the specified integer binary operation if the target indicates it is
/// beneficial. e.g. On x86, it's usually better to promote i16 operations to
/// i32 since i16 instructions are longer.
SDValue DAGCombiner::PromoteIntBinOp(SDValue Op) {
  if (!LegalOperations)
    return SDValue();

  EVT VT = Op.getValueType();
  if (VT.isVector() || !VT.isInteger())
    return SDValue();

  // If operation type is 'undesirable', e.g. i16 on x86, consider
  // promoting it.
  unsigned Opc = Op.getOpcode();
  if (TLI.isTypeDesirableForOp(Opc, VT))
    return SDValue();

  EVT PVT = VT;
  // Consult target whether it is a good idea to promote this operation and
  // what's the right type to promote it to.
  if (TLI.IsDesirableToPromoteOp(Op, PVT)) {
    assert(PVT != VT && "Don't know what type to promote to!");

    LLVM_DEBUG(dbgs() << "\nPromoting "; Op.dump(&DAG));

    bool Replace0 = false;
    SDValue N0 = Op.getOperand(0);
    SDValue NN0 = PromoteOperand(N0, PVT, Replace0);

    bool Replace1 = false;
    SDValue N1 = Op.getOperand(1);
    SDValue NN1 = PromoteOperand(N1, PVT, Replace1);
    SDLoc DL(Op);

    SDValue RV =
        DAG.getNode(ISD::TRUNCATE, DL, VT, DAG.getNode(Opc, DL, PVT, NN0, NN1));

    // We are always replacing N0/N1's use in N and only need additional
    // replacements if there are additional uses.
    // Note: We are checking uses of the *nodes* (SDNode) rather than values
    //       (SDValue) here because the node may reference multiple values
    //       (for example, the chain value of a load node).
    Replace0 &= !N0->hasOneUse();
    Replace1 &= (N0 != N1) && !N1->hasOneUse();

    // Combine Op here so it is preserved past replacements.
    CombineTo(Op.getNode(), RV);

    // If operands have a use ordering, make sure we deal with
    // predecessor first.
    if (Replace0 && Replace1 && N0->isPredecessorOf(N1.getNode())) {
      std::swap(N0, N1);
      std::swap(NN0, NN1);
    }

    if (Replace0) {
      AddToWorklist(NN0.getNode());
      ReplaceLoadWithPromotedLoad(N0.getNode(), NN0.getNode());
    }
    if (Replace1) {
      AddToWorklist(NN1.getNode());
      ReplaceLoadWithPromotedLoad(N1.getNode(), NN1.getNode());
    }
    return Op;
  }
  return SDValue();
}

/// Promote the specified integer shift operation if the target indicates it is
/// beneficial. e.g. On x86, it's usually better to promote i16 operations to
/// i32 since i16 instructions are longer.
SDValue DAGCombiner::PromoteIntShiftOp(SDValue Op) {
  if (!LegalOperations)
    return SDValue();

  EVT VT = Op.getValueType();
  if (VT.isVector() || !VT.isInteger())
    return SDValue();

  // If operation type is 'undesirable', e.g. i16 on x86, consider
  // promoting it.
  unsigned Opc = Op.getOpcode();
  if (TLI.isTypeDesirableForOp(Opc, VT))
    return SDValue();

  EVT PVT = VT;
  // Consult target whether it is a good idea to promote this operation and
  // what's the right type to promote it to.
  if (TLI.IsDesirableToPromoteOp(Op, PVT)) {
    assert(PVT != VT && "Don't know what type to promote to!");

    LLVM_DEBUG(dbgs() << "\nPromoting "; Op.dump(&DAG));

    bool Replace = false;
    SDValue N0 = Op.getOperand(0);
    if (Opc == ISD::SRA)
      N0 = SExtPromoteOperand(N0, PVT);
    else if (Opc == ISD::SRL)
      N0 = ZExtPromoteOperand(N0, PVT);
    else
      N0 = PromoteOperand(N0, PVT, Replace);

    if (!N0.getNode())
      return SDValue();

    SDLoc DL(Op);
    SDValue N1 = Op.getOperand(1);
    SDValue RV =
        DAG.getNode(ISD::TRUNCATE, DL, VT, DAG.getNode(Opc, DL, PVT, N0, N1));

    if (Replace)
      ReplaceLoadWithPromotedLoad(Op.getOperand(0).getNode(), N0.getNode());

    // Deal with Op being deleted.
    if (Op && Op.getOpcode() != ISD::DELETED_NODE)
      return RV;
  }
  return SDValue();
}

SDValue DAGCombiner::PromoteExtend(SDValue Op) {
  if (!LegalOperations)
    return SDValue();

  EVT VT = Op.getValueType();
  if (VT.isVector() || !VT.isInteger())
    return SDValue();

  // If operation type is 'undesirable', e.g. i16 on x86, consider
  // promoting it.
  unsigned Opc = Op.getOpcode();
  if (TLI.isTypeDesirableForOp(Opc, VT))
    return SDValue();

  EVT PVT = VT;
  // Consult target whether it is a good idea to promote this operation and
  // what's the right type to promote it to.
  if (TLI.IsDesirableToPromoteOp(Op, PVT)) {
    assert(PVT != VT && "Don't know what type to promote to!");
    // fold (aext (aext x)) -> (aext x)
    // fold (aext (zext x)) -> (zext x)
    // fold (aext (sext x)) -> (sext x)
    LLVM_DEBUG(dbgs() << "\nPromoting "; Op.dump(&DAG));
    return DAG.getNode(Op.getOpcode(), SDLoc(Op), VT, Op.getOperand(0));
  }
  return SDValue();
}

bool DAGCombiner::PromoteLoad(SDValue Op) {
  if (!LegalOperations)
    return false;

  if (!ISD::isUNINDEXEDLoad(Op.getNode()))
    return false;

  EVT VT = Op.getValueType();
  if (VT.isVector() || !VT.isInteger())
    return false;

  // If operation type is 'undesirable', e.g. i16 on x86, consider
  // promoting it.
  unsigned Opc = Op.getOpcode();
  if (TLI.isTypeDesirableForOp(Opc, VT))
    return false;

  EVT PVT = VT;
  // Consult target whether it is a good idea to promote this operation and
  // what's the right type to promote it to.
  if (TLI.IsDesirableToPromoteOp(Op, PVT)) {
    assert(PVT != VT && "Don't know what type to promote to!");

    SDLoc DL(Op);
    SDNode *N = Op.getNode();
    LoadSDNode *LD = cast<LoadSDNode>(N);
    EVT MemVT = LD->getMemoryVT();
    ISD::LoadExtType ExtType = ISD::isNON_EXTLoad(LD) ? ISD::EXTLOAD
                                                      : LD->getExtensionType();
    SDValue NewLD = DAG.getExtLoad(ExtType, DL, PVT,
                                   LD->getChain(), LD->getBasePtr(),
                                   MemVT, LD->getMemOperand());
    SDValue Result = DAG.getNode(ISD::TRUNCATE, DL, VT, NewLD);

    LLVM_DEBUG(dbgs() << "\nPromoting "; N->dump(&DAG); dbgs() << "\nTo: ";
               Result.dump(&DAG); dbgs() << '\n');

    DAG.ReplaceAllUsesOfValueWith(SDValue(N, 0), Result);
    DAG.ReplaceAllUsesOfValueWith(SDValue(N, 1), NewLD.getValue(1));

    AddToWorklist(Result.getNode());
    recursivelyDeleteUnusedNodes(N);
    return true;
  }

  return false;
}

/// Recursively delete a node which has no uses and any operands for
/// which it is the only use.
///
/// Note that this both deletes the nodes and removes them from the worklist.
/// It also adds any nodes who have had a user deleted to the worklist as they
/// may now have only one use and subject to other combines.
bool DAGCombiner::recursivelyDeleteUnusedNodes(SDNode *N) {
  if (!N->use_empty())
    return false;

  SmallSetVector<SDNode *, 16> Nodes;
  Nodes.insert(N);
  do {
    N = Nodes.pop_back_val();
    if (!N)
      continue;

    if (N->use_empty()) {
      for (const SDValue &ChildN : N->op_values())
        Nodes.insert(ChildN.getNode());

      removeFromWorklist(N);
      DAG.DeleteNode(N);
    } else {
      AddToWorklist(N);
    }
  } while (!Nodes.empty());
  return true;
}

//===----------------------------------------------------------------------===//
//  Main DAG Combiner implementation
//===----------------------------------------------------------------------===//

void DAGCombiner::Run(CombineLevel AtLevel) {
  // set the instance variables, so that the various visit routines may use it.
  Level = AtLevel;
  LegalDAG = Level >= AfterLegalizeDAG;
  LegalOperations = Level >= AfterLegalizeVectorOps;
  LegalTypes = Level >= AfterLegalizeTypes;

  WorklistInserter AddNodes(*this);

  // Add all the dag nodes to the worklist.
  //
  // Note: All nodes are not added to PruningList here, this is because the only
  // nodes which can be deleted are those which have no uses and all other nodes
  // which would otherwise be added to the worklist by the first call to
  // getNextWorklistEntry are already present in it.
  for (SDNode &Node : DAG.allnodes())
    AddToWorklist(&Node, /* IsCandidateForPruning */ Node.use_empty());

  // Create a dummy node (which is not added to allnodes), that adds a reference
  // to the root node, preventing it from being deleted, and tracking any
  // changes of the root.
  HandleSDNode Dummy(DAG.getRoot());

  // While we have a valid worklist entry node, try to combine it.
  while (SDNode *N = getNextWorklistEntry()) {
    // If N has no uses, it is dead.  Make sure to revisit all N's operands once
    // N is deleted from the DAG, since they too may now be dead or may have a
    // reduced number of uses, allowing other xforms.
    if (recursivelyDeleteUnusedNodes(N))
      continue;

    WorklistRemover DeadNodes(*this);

    // If this combine is running after legalizing the DAG, re-legalize any
    // nodes pulled off the worklist.
    if (LegalDAG) {
      SmallSetVector<SDNode *, 16> UpdatedNodes;
      bool NIsValid = DAG.LegalizeOp(N, UpdatedNodes);

      for (SDNode *LN : UpdatedNodes)
        AddToWorklistWithUsers(LN);

      if (!NIsValid)
        continue;
    }

    LLVM_DEBUG(dbgs() << "\nCombining: "; N->dump(&DAG));

    // Add any operands of the new node which have not yet been combined to the
    // worklist as well. getNextWorklistEntry flags nodes that have been
    // combined before. Because the worklist uniques things already, this won't
    // repeatedly process the same operand.
    for (const SDValue &ChildN : N->op_values())
      AddToWorklist(ChildN.getNode(), /*IsCandidateForPruning=*/true,
                    /*SkipIfCombinedBefore=*/true);

    SDValue RV = combine(N);

    if (!RV.getNode())
      continue;

    ++NodesCombined;

    // Invalidate cached info.
    ChainsWithoutMergeableStores.clear();

    // If we get back the same node we passed in, rather than a new node or
    // zero, we know that the node must have defined multiple values and
    // CombineTo was used.  Since CombineTo takes care of the worklist
    // mechanics for us, we have no work to do in this case.
    if (RV.getNode() == N)
      continue;

    assert(N->getOpcode() != ISD::DELETED_NODE &&
           RV.getOpcode() != ISD::DELETED_NODE &&
           "Node was deleted but visit returned new node!");

    LLVM_DEBUG(dbgs() << " ... into: "; RV.dump(&DAG));

    if (N->getNumValues() == RV->getNumValues())
      DAG.ReplaceAllUsesWith(N, RV.getNode());
    else {
      assert(N->getValueType(0) == RV.getValueType() &&
             N->getNumValues() == 1 && "Type mismatch");
      DAG.ReplaceAllUsesWith(N, &RV);
    }

    // Push the new node and any users onto the worklist.  Omit this if the
    // new node is the EntryToken (e.g. if a store managed to get optimized
    // out), because re-visiting the EntryToken and its users will not uncover
    // any additional opportunities, but there may be a large number of such
    // users, potentially causing compile time explosion.
    if (RV.getOpcode() != ISD::EntryToken)
      AddToWorklistWithUsers(RV.getNode());

    // Finally, if the node is now dead, remove it from the graph.  The node
    // may not be dead if the replacement process recursively simplified to
    // something else needing this node. This will also take care of adding any
    // operands which have lost a user to the worklist.
    recursivelyDeleteUnusedNodes(N);
  }

  // If the root changed (e.g. it was a dead load, update the root).
  DAG.setRoot(Dummy.getValue());
  DAG.RemoveDeadNodes();
}

SDValue DAGCombiner::visit(SDNode *N) {
  // clang-format off
  switch (N->getOpcode()) {
  default: break;
  case ISD::TokenFactor:        return visitTokenFactor(N);
  case ISD::MERGE_VALUES:       return visitMERGE_VALUES(N);
  case ISD::ADD:                return visitADD(N);
  case ISD::SUB:                return visitSUB(N);
  case ISD::SADDSAT:
  case ISD::UADDSAT:            return visitADDSAT(N);
  case ISD::SSUBSAT:
  case ISD::USUBSAT:            return visitSUBSAT(N);
  case ISD::ADDC:               return visitADDC(N);
  case ISD::SADDO:
  case ISD::UADDO:              return visitADDO(N);
  case ISD::SUBC:               return visitSUBC(N);
  case ISD::SSUBO:
  case ISD::USUBO:              return visitSUBO(N);
  case ISD::ADDE:               return visitADDE(N);
  case ISD::UADDO_CARRY:        return visitUADDO_CARRY(N);
  case ISD::SADDO_CARRY:        return visitSADDO_CARRY(N);
  case ISD::SUBE:               return visitSUBE(N);
  case ISD::USUBO_CARRY:        return visitUSUBO_CARRY(N);
  case ISD::SSUBO_CARRY:        return visitSSUBO_CARRY(N);
  case ISD::SMULFIX:
  case ISD::SMULFIXSAT:
  case ISD::UMULFIX:
  case ISD::UMULFIXSAT:         return visitMULFIX(N);
  case ISD::MUL:                return visitMUL<EmptyMatchContext>(N);
  case ISD::SDIV:               return visitSDIV(N);
  case ISD::UDIV:               return visitUDIV(N);
  case ISD::SREM:
  case ISD::UREM:               return visitREM(N);
  case ISD::MULHU:              return visitMULHU(N);
  case ISD::MULHS:              return visitMULHS(N);
  case ISD::AVGFLOORS:
  case ISD::AVGFLOORU:
  case ISD::AVGCEILS:
  case ISD::AVGCEILU:           return visitAVG(N);
  case ISD::ABDS:
  case ISD::ABDU:               return visitABD(N);
  case ISD::SMUL_LOHI:          return visitSMUL_LOHI(N);
  case ISD::UMUL_LOHI:          return visitUMUL_LOHI(N);
  case ISD::SMULO:
  case ISD::UMULO:              return visitMULO(N);
  case ISD::SMIN:
  case ISD::SMAX:
  case ISD::UMIN:
  case ISD::UMAX:               return visitIMINMAX(N);
  case ISD::AND:                return visitAND(N);
  case ISD::OR:                 return visitOR(N);
  case ISD::XOR:                return visitXOR(N);
  case ISD::SHL:                return visitSHL(N);
  case ISD::SRA:                return visitSRA(N);
  case ISD::SRL:                return visitSRL(N);
  case ISD::ROTR:
  case ISD::ROTL:               return visitRotate(N);
  case ISD::FSHL:
  case ISD::FSHR:               return visitFunnelShift(N);
  case ISD::SSHLSAT:
  case ISD::USHLSAT:            return visitSHLSAT(N);
  case ISD::ABS:                return visitABS(N);
  case ISD::BSWAP:              return visitBSWAP(N);
  case ISD::BITREVERSE:         return visitBITREVERSE(N);
  case ISD::CTLZ:               return visitCTLZ(N);
  case ISD::CTLZ_ZERO_UNDEF:    return visitCTLZ_ZERO_UNDEF(N);
  case ISD::CTTZ:               return visitCTTZ(N);
  case ISD::CTTZ_ZERO_UNDEF:    return visitCTTZ_ZERO_UNDEF(N);
  case ISD::CTPOP:              return visitCTPOP(N);
  case ISD::SELECT:             return visitSELECT(N);
  case ISD::VSELECT:            return visitVSELECT(N);
  case ISD::SELECT_CC:          return visitSELECT_CC(N);
  case ISD::SETCC:              return visitSETCC(N);
  case ISD::SETCCCARRY:         return visitSETCCCARRY(N);
  case ISD::SIGN_EXTEND:        return visitSIGN_EXTEND(N);
  case ISD::ZERO_EXTEND:        return visitZERO_EXTEND(N);
  case ISD::ANY_EXTEND:         return visitANY_EXTEND(N);
  case ISD::AssertSext:
  case ISD::AssertZext:         return visitAssertExt(N);
  case ISD::AssertAlign:        return visitAssertAlign(N);
  case ISD::SIGN_EXTEND_INREG:  return visitSIGN_EXTEND_INREG(N);
  case ISD::SIGN_EXTEND_VECTOR_INREG:
  case ISD::ZERO_EXTEND_VECTOR_INREG:
  case ISD::ANY_EXTEND_VECTOR_INREG: return visitEXTEND_VECTOR_INREG(N);
  case ISD::TRUNCATE:           return visitTRUNCATE(N);
  case ISD::TRUNCATE_USAT_U:    return visitTRUNCATE_USAT_U(N);
  case ISD::BITCAST:            return visitBITCAST(N);
  case ISD::BUILD_PAIR:         return visitBUILD_PAIR(N);
  case ISD::FADD:               return visitFADD(N);
  case ISD::STRICT_FADD:        return visitSTRICT_FADD(N);
  case ISD::FSUB:               return visitFSUB(N);
  case ISD::FMUL:               return visitFMUL(N);
  case ISD::FMA:                return visitFMA<EmptyMatchContext>(N);
  case ISD::FMAD:               return visitFMAD(N);
  case ISD::FDIV:               return visitFDIV(N);
  case ISD::FREM:               return visitFREM(N);
  case ISD::FSQRT:              return visitFSQRT(N);
  case ISD::FCOPYSIGN:          return visitFCOPYSIGN(N);
  case ISD::FPOW:               return visitFPOW(N);
  case ISD::SINT_TO_FP:         return visitSINT_TO_FP(N);
  case ISD::UINT_TO_FP:         return visitUINT_TO_FP(N);
  case ISD::FP_TO_SINT:         return visitFP_TO_SINT(N);
  case ISD::FP_TO_UINT:         return visitFP_TO_UINT(N);
  case ISD::LROUND:
  case ISD::LLROUND:
  case ISD::LRINT:
  case ISD::LLRINT:             return visitXROUND(N);
  case ISD::FP_ROUND:           return visitFP_ROUND(N);
  case ISD::FP_EXTEND:          return visitFP_EXTEND(N);
  case ISD::FNEG:               return visitFNEG(N);
  case ISD::FABS:               return visitFABS(N);
  case ISD::FFLOOR:             return visitFFLOOR(N);
  case ISD::FMINNUM:
  case ISD::FMAXNUM:
  case ISD::FMINIMUM:
  case ISD::FMAXIMUM:
  case ISD::FMINIMUMNUM:
  case ISD::FMAXIMUMNUM:       return visitFMinMax(N);
  case ISD::FCEIL:              return visitFCEIL(N);
  case ISD::FTRUNC:             return visitFTRUNC(N);
  case ISD::FFREXP:             return visitFFREXP(N);
  case ISD::BRCOND:             return visitBRCOND(N);
  case ISD::BR_CC:              return visitBR_CC(N);
  case ISD::LOAD:               return visitLOAD(N);
  case ISD::STORE:              return visitSTORE(N);
  case ISD::ATOMIC_STORE:       return visitATOMIC_STORE(N);
  case ISD::INSERT_VECTOR_ELT:  return visitINSERT_VECTOR_ELT(N);
  case ISD::EXTRACT_VECTOR_ELT: return visitEXTRACT_VECTOR_ELT(N);
  case ISD::BUILD_VECTOR:       return visitBUILD_VECTOR(N);
  case ISD::CONCAT_VECTORS:     return visitCONCAT_VECTORS(N);
  case ISD::EXTRACT_SUBVECTOR:  return visitEXTRACT_SUBVECTOR(N);
  case ISD::VECTOR_SHUFFLE:     return visitVECTOR_SHUFFLE(N);
  case ISD::SCALAR_TO_VECTOR:   return visitSCALAR_TO_VECTOR(N);
  case ISD::INSERT_SUBVECTOR:   return visitINSERT_SUBVECTOR(N);
  case ISD::MGATHER:            return visitMGATHER(N);
  case ISD::MLOAD:              return visitMLOAD(N);
  case ISD::MSCATTER:           return visitMSCATTER(N);
  case ISD::MSTORE:             return visitMSTORE(N);
  case ISD::EXPERIMENTAL_VECTOR_HISTOGRAM: return visitMHISTOGRAM(N);
  case ISD::VECTOR_COMPRESS:    return visitVECTOR_COMPRESS(N);
  case ISD::LIFETIME_END:       return visitLIFETIME_END(N);
  case ISD::FP_TO_FP16:         return visitFP_TO_FP16(N);
  case ISD::FP16_TO_FP:         return visitFP16_TO_FP(N);
  case ISD::FP_TO_BF16:         return visitFP_TO_BF16(N);
  case ISD::BF16_TO_FP:         return visitBF16_TO_FP(N);
  case ISD::FREEZE:             return visitFREEZE(N);
  case ISD::GET_FPENV_MEM:      return visitGET_FPENV_MEM(N);
  case ISD::SET_FPENV_MEM:      return visitSET_FPENV_MEM(N);
  case ISD::FCANONICALIZE:      return visitFCANONICALIZE(N);
  case ISD::VECREDUCE_FADD:
  case ISD::VECREDUCE_FMUL:
  case ISD::VECREDUCE_ADD:
  case ISD::VECREDUCE_MUL:
  case ISD::VECREDUCE_AND:
  case ISD::VECREDUCE_OR:
  case ISD::VECREDUCE_XOR:
  case ISD::VECREDUCE_SMAX:
  case ISD::VECREDUCE_SMIN:
  case ISD::VECREDUCE_UMAX:
  case ISD::VECREDUCE_UMIN:
  case ISD::VECREDUCE_FMAX:
  case ISD::VECREDUCE_FMIN:
  case ISD::VECREDUCE_FMAXIMUM:
  case ISD::VECREDUCE_FMINIMUM:     return visitVECREDUCE(N);
#define BEGIN_REGISTER_VP_SDNODE(SDOPC, ...) case ISD::SDOPC:
#include "llvm/IR/VPIntrinsics.def"
    return visitVPOp(N);
  }
  // clang-format on
  return SDValue();
}

SDValue DAGCombiner::combine(SDNode *N) {
  if (!DebugCounter::shouldExecute(DAGCombineCounter))
    return SDValue();

  SDValue RV;
  if (!DisableGenericCombines)
    RV = visit(N);

  // If nothing happened, try a target-specific DAG combine.
  if (!RV.getNode()) {
    assert(N->getOpcode() != ISD::DELETED_NODE &&
           "Node was deleted but visit returned NULL!");

    if (N->getOpcode() >= ISD::BUILTIN_OP_END ||
        TLI.hasTargetDAGCombine((ISD::NodeType)N->getOpcode())) {

      // Expose the DAG combiner to the target combiner impls.
      TargetLowering::DAGCombinerInfo
        DagCombineInfo(DAG, Level, false, this);

      RV = TLI.PerformDAGCombine(N, DagCombineInfo);
    }
  }

  // If nothing happened still, try promoting the operation.
  if (!RV.getNode()) {
    switch (N->getOpcode()) {
    default: break;
    case ISD::ADD:
    case ISD::SUB:
    case ISD::MUL:
    case ISD::AND:
    case ISD::OR:
    case ISD::XOR:
      RV = PromoteIntBinOp(SDValue(N, 0));
      break;
    case ISD::SHL:
    case ISD::SRA:
    case ISD::SRL:
      RV = PromoteIntShiftOp(SDValue(N, 0));
      break;
    case ISD::SIGN_EXTEND:
    case ISD::ZERO_EXTEND:
    case ISD::ANY_EXTEND:
      RV = PromoteExtend(SDValue(N, 0));
      break;
    case ISD::LOAD:
      if (PromoteLoad(SDValue(N, 0)))
        RV = SDValue(N, 0);
      break;
    }
  }

  // If N is a commutative binary node, try to eliminate it if the commuted
  // version is already present in the DAG.
  if (!RV.getNode() && TLI.isCommutativeBinOp(N->getOpcode())) {
    SDValue N0 = N->getOperand(0);
    SDValue N1 = N->getOperand(1);

    // Constant operands are canonicalized to RHS.
    if (N0 != N1 && (isa<ConstantSDNode>(N0) || !isa<ConstantSDNode>(N1))) {
      SDValue Ops[] = {N1, N0};
      SDNode *CSENode = DAG.getNodeIfExists(N->getOpcode(), N->getVTList(), Ops,
                                            N->getFlags());
      if (CSENode)
        return SDValue(CSENode, 0);
    }
  }

  return RV;
}

/// Given a node, return its input chain if it has one, otherwise return a null
/// sd operand.
static SDValue getInputChainForNode(SDNode *N) {
  if (unsigned NumOps = N->getNumOperands()) {
    if (N->getOperand(0).getValueType() == MVT::Other)
      return N->getOperand(0);
    if (N->getOperand(NumOps-1).getValueType() == MVT::Other)
      return N->getOperand(NumOps-1);
    for (unsigned i = 1; i < NumOps-1; ++i)
      if (N->getOperand(i).getValueType() == MVT::Other)
        return N->getOperand(i);
  }
  return SDValue();
}

SDValue DAGCombiner::visitFCANONICALIZE(SDNode *N) {
  SDValue Operand = N->getOperand(0);
  EVT VT = Operand.getValueType();
  SDLoc dl(N);

  // Canonicalize undef to quiet NaN.
  if (Operand.isUndef()) {
    APFloat CanonicalQNaN = APFloat::getQNaN(VT.getFltSemantics());
    return DAG.getConstantFP(CanonicalQNaN, dl, VT);
  }
  return SDValue();
}

SDValue DAGCombiner::visitTokenFactor(SDNode *N) {
  // If N has two operands, where one has an input chain equal to the other,
  // the 'other' chain is redundant.
  if (N->getNumOperands() == 2) {
    if (getInputChainForNode(N->getOperand(0).getNode()) == N->getOperand(1))
      return N->getOperand(0);
    if (getInputChainForNode(N->getOperand(1).getNode()) == N->getOperand(0))
      return N->getOperand(1);
  }

  // Don't simplify token factors if optnone.
  if (OptLevel == CodeGenOptLevel::None)
    return SDValue();

  // Don't simplify the token factor if the node itself has too many operands.
  if (N->getNumOperands() > TokenFactorInlineLimit)
    return SDValue();

  // If the sole user is a token factor, we should make sure we have a
  // chance to merge them together. This prevents TF chains from inhibiting
  // optimizations.
  if (N->hasOneUse() && N->use_begin()->getOpcode() == ISD::TokenFactor)
    AddToWorklist(*(N->use_begin()));

  SmallVector<SDNode *, 8> TFs;     // List of token factors to visit.
  SmallVector<SDValue, 8> Ops;      // Ops for replacing token factor.
  SmallPtrSet<SDNode*, 16> SeenOps;
  bool Changed = false;             // If we should replace this token factor.

  // Start out with this token factor.
  TFs.push_back(N);

  // Iterate through token factors.  The TFs grows when new token factors are
  // encountered.
  for (unsigned i = 0; i < TFs.size(); ++i) {
    // Limit number of nodes to inline, to avoid quadratic compile times.
    // We have to add the outstanding Token Factors to Ops, otherwise we might
    // drop Ops from the resulting Token Factors.
    if (Ops.size() > TokenFactorInlineLimit) {
      for (unsigned j = i; j < TFs.size(); j++)
        Ops.emplace_back(TFs[j], 0);
      // Drop unprocessed Token Factors from TFs, so we do not add them to the
      // combiner worklist later.
      TFs.resize(i);
      break;
    }

    SDNode *TF = TFs[i];
    // Check each of the operands.
    for (const SDValue &Op : TF->op_values()) {
      switch (Op.getOpcode()) {
      case ISD::EntryToken:
        // Entry tokens don't need to be added to the list. They are
        // redundant.
        Changed = true;
        break;

      case ISD::TokenFactor:
        if (Op.hasOneUse() && !is_contained(TFs, Op.getNode())) {
          // Queue up for processing.
          TFs.push_back(Op.getNode());
          Changed = true;
          break;
        }
        [[fallthrough]];

      default:
        // Only add if it isn't already in the list.
        if (SeenOps.insert(Op.getNode()).second)
          Ops.push_back(Op);
        else
          Changed = true;
        break;
      }
    }
  }

  // Re-visit inlined Token Factors, to clean them up in case they have been
  // removed. Skip the first Token Factor, as this is the current node.
  for (unsigned i = 1, e = TFs.size(); i < e; i++)
    AddToWorklist(TFs[i]);

  // Remove Nodes that are chained to another node in the list. Do so
  // by walking up chains breath-first stopping when we've seen
  // another operand. In general we must climb to the EntryNode, but we can exit
  // early if we find all remaining work is associated with just one operand as
  // no further pruning is possible.

  // List of nodes to search through and original Ops from which they originate.
  SmallVector<std::pair<SDNode *, unsigned>, 8> Worklist;
  SmallVector<unsigned, 8> OpWorkCount; // Count of work for each Op.
  SmallPtrSet<SDNode *, 16> SeenChains;
  bool DidPruneOps = false;

  unsigned NumLeftToConsider = 0;
  for (const SDValue &Op : Ops) {
    Worklist.push_back(std::make_pair(Op.getNode(), NumLeftToConsider++));
    OpWorkCount.push_back(1);
  }

  auto AddToWorklist = [&](unsigned CurIdx, SDNode *Op, unsigned OpNumber) {
    // If this is an Op, we can remove the op from the list. Remark any
    // search associated with it as from the current OpNumber.
    if (SeenOps.contains(Op)) {
      Changed = true;
      DidPruneOps = true;
      unsigned OrigOpNumber = 0;
      while (OrigOpNumber < Ops.size() && Ops[OrigOpNumber].getNode() != Op)
        OrigOpNumber++;
      assert((OrigOpNumber != Ops.size()) &&
             "expected to find TokenFactor Operand");
      // Re-mark worklist from OrigOpNumber to OpNumber
      for (unsigned i = CurIdx + 1; i < Worklist.size(); ++i) {
        if (Worklist[i].second == OrigOpNumber) {
          Worklist[i].second = OpNumber;
        }
      }
      OpWorkCount[OpNumber] += OpWorkCount[OrigOpNumber];
      OpWorkCount[OrigOpNumber] = 0;
      NumLeftToConsider--;
    }
    // Add if it's a new chain
    if (SeenChains.insert(Op).second) {
      OpWorkCount[OpNumber]++;
      Worklist.push_back(std::make_pair(Op, OpNumber));
    }
  };

  for (unsigned i = 0; i < Worklist.size() && i < 1024; ++i) {
    // We need at least be consider at least 2 Ops to prune.
    if (NumLeftToConsider <= 1)
      break;
    auto CurNode = Worklist[i].first;
    auto CurOpNumber = Worklist[i].second;
    assert((OpWorkCount[CurOpNumber] > 0) &&
           "Node should not appear in worklist");
    switch (CurNode->getOpcode()) {
    case ISD::EntryToken:
      // Hitting EntryToken is the only way for the search to terminate without
      // hitting
      // another operand's search. Prevent us from marking this operand
      // considered.
      NumLeftToConsider++;
      break;
    case ISD::TokenFactor:
      for (const SDValue &Op : CurNode->op_values())
        AddToWorklist(i, Op.getNode(), CurOpNumber);
      break;
    case ISD::LIFETIME_START:
    case ISD::LIFETIME_END:
    case ISD::CopyFromReg:
    case ISD::CopyToReg:
      AddToWorklist(i, CurNode->getOperand(0).getNode(), CurOpNumber);
      break;
    default:
      if (auto *MemNode = dyn_cast<MemSDNode>(CurNode))
        AddToWorklist(i, MemNode->getChain().getNode(), CurOpNumber);
      break;
    }
    OpWorkCount[CurOpNumber]--;
    if (OpWorkCount[CurOpNumber] == 0)
      NumLeftToConsider--;
  }

  // If we've changed things around then replace token factor.
  if (Changed) {
    SDValue Result;
    if (Ops.empty()) {
      // The entry token is the only possible outcome.
      Result = DAG.getEntryNode();
    } else {
      if (DidPruneOps) {
        SmallVector<SDValue, 8> PrunedOps;
        //
        for (const SDValue &Op : Ops) {
          if (SeenChains.count(Op.getNode()) == 0)
            PrunedOps.push_back(Op);
        }
        Result = DAG.getTokenFactor(SDLoc(N), PrunedOps);
      } else {
        Result = DAG.getTokenFactor(SDLoc(N), Ops);
      }
    }
    return Result;
  }
  return SDValue();
}

/// MERGE_VALUES can always be eliminated.
SDValue DAGCombiner::visitMERGE_VALUES(SDNode *N) {
  WorklistRemover DeadNodes(*this);
  // Replacing results may cause a different MERGE_VALUES to suddenly
  // be CSE'd with N, and carry its uses with it. Iterate until no
  // uses remain, to ensure that the node can be safely deleted.
  // First add the users of this node to the work list so that they
  // can be tried again once they have new operands.
  AddUsersToWorklist(N);
  do {
    // Do as a single replacement to avoid rewalking use lists.
    SmallVector<SDValue, 8> Ops(N->ops());
    DAG.ReplaceAllUsesWith(N, Ops.data());
  } while (!N->use_empty());
  deleteAndRecombine(N);
  return SDValue(N, 0);   // Return N so it doesn't get rechecked!
}

/// If \p N is a ConstantSDNode with isOpaque() == false return it casted to a
/// ConstantSDNode pointer else nullptr.
static ConstantSDNode *getAsNonOpaqueConstant(SDValue N) {
  ConstantSDNode *Const = dyn_cast<ConstantSDNode>(N);
  return Const != nullptr && !Const->isOpaque() ? Const : nullptr;
}

// isTruncateOf - If N is a truncate of some other value, return true, record
// the value being truncated in Op and which of Op's bits are zero/one in Known.
// This function computes KnownBits to avoid a duplicated call to
// computeKnownBits in the caller.
static bool isTruncateOf(SelectionDAG &DAG, SDValue N, SDValue &Op,
                         KnownBits &Known) {
  if (N->getOpcode() == ISD::TRUNCATE) {
    Op = N->getOperand(0);
    Known = DAG.computeKnownBits(Op);
    if (N->getFlags().hasNoUnsignedWrap())
      Known.Zero.setBitsFrom(N.getScalarValueSizeInBits());
    return true;
  }

  if (N.getValueType().getScalarType() != MVT::i1 ||
      !sd_match(
          N, m_c_SetCC(m_Value(Op), m_Zero(), m_SpecificCondCode(ISD::SETNE))))
    return false;

  Known = DAG.computeKnownBits(Op);
  return (Known.Zero | 1).isAllOnes();
}

/// Return true if 'Use' is a load or a store that uses N as its base pointer
/// and that N may be folded in the load / store addressing mode.
static bool canFoldInAddressingMode(SDNode *N, SDNode *Use, SelectionDAG &DAG,
                                    const TargetLowering &TLI) {
  EVT VT;
  unsigned AS;

  if (LoadSDNode *LD = dyn_cast<LoadSDNode>(Use)) {
    if (LD->isIndexed() || LD->getBasePtr().getNode() != N)
      return false;
    VT = LD->getMemoryVT();
    AS = LD->getAddressSpace();
  } else if (StoreSDNode *ST = dyn_cast<StoreSDNode>(Use)) {
    if (ST->isIndexed() || ST->getBasePtr().getNode() != N)
      return false;
    VT = ST->getMemoryVT();
    AS = ST->getAddressSpace();
  } else if (MaskedLoadSDNode *LD = dyn_cast<MaskedLoadSDNode>(Use)) {
    if (LD->isIndexed() || LD->getBasePtr().getNode() != N)
      return false;
    VT = LD->getMemoryVT();
    AS = LD->getAddressSpace();
  } else if (MaskedStoreSDNode *ST = dyn_cast<MaskedStoreSDNode>(Use)) {
    if (ST->isIndexed() || ST->getBasePtr().getNode() != N)
      return false;
    VT = ST->getMemoryVT();
    AS = ST->getAddressSpace();
  } else {
    return false;
  }

  TargetLowering::AddrMode AM;
  if (N->getOpcode() == ISD::ADD) {
    AM.HasBaseReg = true;
    ConstantSDNode *Offset = dyn_cast<ConstantSDNode>(N->getOperand(1));
    if (Offset)
      // [reg +/- imm]
      AM.BaseOffs = Offset->getSExtValue();
    else
      // [reg +/- reg]
      AM.Scale = 1;
  } else if (N->getOpcode() == ISD::SUB) {
    AM.HasBaseReg = true;
    ConstantSDNode *Offset = dyn_cast<ConstantSDNode>(N->getOperand(1));
    if (Offset)
      // [reg +/- imm]
      AM.BaseOffs = -Offset->getSExtValue();
    else
      // [reg +/- reg]
      AM.Scale = 1;
  } else {
    return false;
  }

  return TLI.isLegalAddressingMode(DAG.getDataLayout(), AM,
                                   VT.getTypeForEVT(*DAG.getContext()), AS);
}

/// This inverts a canonicalization in IR that replaces a variable select arm
/// with an identity constant. Codegen improves if we re-use the variable
/// operand rather than load a constant. This can also be converted into a
/// masked vector operation if the target supports it.
static SDValue foldSelectWithIdentityConstant(SDNode *N, SelectionDAG &DAG,
                                              bool ShouldCommuteOperands) {
  // Match a select as operand 1. The identity constant that we are looking for
  // is only valid as operand 1 of a non-commutative binop.
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  if (ShouldCommuteOperands)
    std::swap(N0, N1);

  // TODO: Should this apply to scalar select too?
  if (N1.getOpcode() != ISD::VSELECT || !N1.hasOneUse())
    return SDValue();

  // We can't hoist all instructions because of immediate UB (not speculatable).
  // For example div/rem by zero.
  if (!DAG.isSafeToSpeculativelyExecuteNode(N))
    return SDValue();

  unsigned Opcode = N->getOpcode();
  EVT VT = N->getValueType(0);
  SDValue Cond = N1.getOperand(0);
  SDValue TVal = N1.getOperand(1);
  SDValue FVal = N1.getOperand(2);

  // This transform increases uses of N0, so freeze it to be safe.
  // binop N0, (vselect Cond, IDC, FVal) --> vselect Cond, N0, (binop N0, FVal)
  unsigned OpNo = ShouldCommuteOperands ? 0 : 1;
  if (isNeutralConstant(Opcode, N->getFlags(), TVal, OpNo)) {
    SDValue F0 = DAG.getFreeze(N0);
    SDValue NewBO = DAG.getNode(Opcode, SDLoc(N), VT, F0, FVal, N->getFlags());
    return DAG.getSelect(SDLoc(N), VT, Cond, F0, NewBO);
  }
  // binop N0, (vselect Cond, TVal, IDC) --> vselect Cond, (binop N0, TVal), N0
  if (isNeutralConstant(Opcode, N->getFlags(), FVal, OpNo)) {
    SDValue F0 = DAG.getFreeze(N0);
    SDValue NewBO = DAG.getNode(Opcode, SDLoc(N), VT, F0, TVal, N->getFlags());
    return DAG.getSelect(SDLoc(N), VT, Cond, NewBO, F0);
  }

  return SDValue();
}

SDValue DAGCombiner::foldBinOpIntoSelect(SDNode *BO) {
  assert(TLI.isBinOp(BO->getOpcode()) && BO->getNumValues() == 1 &&
         "Unexpected binary operator");

  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  auto BinOpcode = BO->getOpcode();
  EVT VT = BO->getValueType(0);
  if (TLI.shouldFoldSelectWithIdentityConstant(BinOpcode, VT)) {
    if (SDValue Sel = foldSelectWithIdentityConstant(BO, DAG, false))
      return Sel;

    if (TLI.isCommutativeBinOp(BO->getOpcode()))
      if (SDValue Sel = foldSelectWithIdentityConstant(BO, DAG, true))
        return Sel;
  }

  // Don't do this unless the old select is going away. We want to eliminate the
  // binary operator, not replace a binop with a select.
  // TODO: Handle ISD::SELECT_CC.
  unsigned SelOpNo = 0;
  SDValue Sel = BO->getOperand(0);
  if (Sel.getOpcode() != ISD::SELECT || !Sel.hasOneUse()) {
    SelOpNo = 1;
    Sel = BO->getOperand(1);

    // Peek through trunc to shift amount type.
    if ((BinOpcode == ISD::SHL || BinOpcode == ISD::SRA ||
         BinOpcode == ISD::SRL) && Sel.hasOneUse()) {
      // This is valid when the truncated bits of x are already zero.
      SDValue Op;
      KnownBits Known;
      if (isTruncateOf(DAG, Sel, Op, Known) &&
          Known.countMaxActiveBits() < Sel.getScalarValueSizeInBits())
        Sel = Op;
    }
  }

  if (Sel.getOpcode() != ISD::SELECT || !Sel.hasOneUse())
    return SDValue();

  SDValue CT = Sel.getOperand(1);
  if (!isConstantOrConstantVector(CT, true) &&
      !DAG.isConstantFPBuildVectorOrConstantFP(CT))
    return SDValue();

  SDValue CF = Sel.getOperand(2);
  if (!isConstantOrConstantVector(CF, true) &&
      !DAG.isConstantFPBuildVectorOrConstantFP(CF))
    return SDValue();

  // Bail out if any constants are opaque because we can't constant fold those.
  // The exception is "and" and "or" with either 0 or -1 in which case we can
  // propagate non constant operands into select. I.e.:
  // and (select Cond, 0, -1), X --> select Cond, 0, X
  // or X, (select Cond, -1, 0) --> select Cond, -1, X
  bool CanFoldNonConst =
      (BinOpcode == ISD::AND || BinOpcode == ISD::OR) &&
      ((isNullOrNullSplat(CT) && isAllOnesOrAllOnesSplat(CF)) ||
       (isNullOrNullSplat(CF) && isAllOnesOrAllOnesSplat(CT)));

  SDValue CBO = BO->getOperand(SelOpNo ^ 1);
  if (!CanFoldNonConst &&
      !isConstantOrConstantVector(CBO, true) &&
      !DAG.isConstantFPBuildVectorOrConstantFP(CBO))
    return SDValue();

  SDLoc DL(Sel);
  SDValue NewCT, NewCF;

  if (CanFoldNonConst) {
    // If CBO is an opaque constant, we can't rely on getNode to constant fold.
    if ((BinOpcode == ISD::AND && isNullOrNullSplat(CT)) ||
        (BinOpcode == ISD::OR && isAllOnesOrAllOnesSplat(CT)))
      NewCT = CT;
    else
      NewCT = CBO;

    if ((BinOpcode == ISD::AND && isNullOrNullSplat(CF)) ||
        (BinOpcode == ISD::OR && isAllOnesOrAllOnesSplat(CF)))
      NewCF = CF;
    else
      NewCF = CBO;
  } else {
    // We have a select-of-constants followed by a binary operator with a
    // constant. Eliminate the binop by pulling the constant math into the
    // select. Example: add (select Cond, CT, CF), CBO --> select Cond, CT +
    // CBO, CF + CBO
    NewCT = SelOpNo ? DAG.FoldConstantArithmetic(BinOpcode, DL, VT, {CBO, CT})
                    : DAG.FoldConstantArithmetic(BinOpcode, DL, VT, {CT, CBO});
    if (!NewCT)
      return SDValue();

    NewCF = SelOpNo ? DAG.FoldConstantArithmetic(BinOpcode, DL, VT, {CBO, CF})
                    : DAG.FoldConstantArithmetic(BinOpcode, DL, VT, {CF, CBO});
    if (!NewCF)
      return SDValue();
  }

  SDValue SelectOp = DAG.getSelect(DL, VT, Sel.getOperand(0), NewCT, NewCF);
  SelectOp->setFlags(BO->getFlags());
  return SelectOp;
}

static SDValue foldAddSubBoolOfMaskedVal(SDNode *N, const SDLoc &DL,
                                         SelectionDAG &DAG) {
  assert((N->getOpcode() == ISD::ADD || N->getOpcode() == ISD::SUB) &&
         "Expecting add or sub");

  // Match a constant operand and a zext operand for the math instruction:
  // add Z, C
  // sub C, Z
  bool IsAdd = N->getOpcode() == ISD::ADD;
  SDValue C = IsAdd ? N->getOperand(1) : N->getOperand(0);
  SDValue Z = IsAdd ? N->getOperand(0) : N->getOperand(1);
  auto *CN = dyn_cast<ConstantSDNode>(C);
  if (!CN || Z.getOpcode() != ISD::ZERO_EXTEND)
    return SDValue();

  // Match the zext operand as a setcc of a boolean.
  if (Z.getOperand(0).getValueType() != MVT::i1)
    return SDValue();

  // Match the compare as: setcc (X & 1), 0, eq.
  if (!sd_match(Z.getOperand(0), m_SetCC(m_And(m_Value(), m_One()), m_Zero(),
                                         m_SpecificCondCode(ISD::SETEQ))))
    return SDValue();

  // We are adding/subtracting a constant and an inverted low bit. Turn that
  // into a subtract/add of the low bit with incremented/decremented constant:
  // add (zext i1 (seteq (X & 1), 0)), C --> sub C+1, (zext (X & 1))
  // sub C, (zext i1 (seteq (X & 1), 0)) --> add C-1, (zext (X & 1))
  EVT VT = C.getValueType();
  SDValue LowBit = DAG.getZExtOrTrunc(Z.getOperand(0).getOperand(0), DL, VT);
  SDValue C1 = IsAdd ? DAG.getConstant(CN->getAPIntValue() + 1, DL, VT)
                     : DAG.getConstant(CN->getAPIntValue() - 1, DL, VT);
  return DAG.getNode(IsAdd ? ISD::SUB : ISD::ADD, DL, VT, C1, LowBit);
}

// Attempt to form avgceil(A, B) from (A | B) - ((A ^ B) >> 1)
SDValue DAGCombiner::foldSubToAvg(SDNode *N, const SDLoc &DL) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N0.getValueType();
  SDValue A, B;

  if ((!LegalOperations || hasOperation(ISD::AVGCEILU, VT)) &&
      sd_match(N, m_Sub(m_Or(m_Value(A), m_Value(B)),
                        m_Srl(m_Xor(m_Deferred(A), m_Deferred(B)), m_One())))) {
    return DAG.getNode(ISD::AVGCEILU, DL, VT, A, B);
  }
  if ((!LegalOperations || hasOperation(ISD::AVGCEILS, VT)) &&
      sd_match(N, m_Sub(m_Or(m_Value(A), m_Value(B)),
                        m_Sra(m_Xor(m_Deferred(A), m_Deferred(B)), m_One())))) {
    return DAG.getNode(ISD::AVGCEILS, DL, VT, A, B);
  }
  return SDValue();
}

/// Try to fold a 'not' shifted sign-bit with add/sub with constant operand into
/// a shift and add with a different constant.
static SDValue foldAddSubOfSignBit(SDNode *N, const SDLoc &DL,
                                   SelectionDAG &DAG) {
  assert((N->getOpcode() == ISD::ADD || N->getOpcode() == ISD::SUB) &&
         "Expecting add or sub");

  // We need a constant operand for the add/sub, and the other operand is a
  // logical shift right: add (srl), C or sub C, (srl).
  bool IsAdd = N->getOpcode() == ISD::ADD;
  SDValue ConstantOp = IsAdd ? N->getOperand(1) : N->getOperand(0);
  SDValue ShiftOp = IsAdd ? N->getOperand(0) : N->getOperand(1);
  if (!DAG.isConstantIntBuildVectorOrConstantInt(ConstantOp) ||
      ShiftOp.getOpcode() != ISD::SRL)
    return SDValue();

  // The shift must be of a 'not' value.
  SDValue Not = ShiftOp.getOperand(0);
  if (!Not.hasOneUse() || !isBitwiseNot(Not))
    return SDValue();

  // The shift must be moving the sign bit to the least-significant-bit.
  EVT VT = ShiftOp.getValueType();
  SDValue ShAmt = ShiftOp.getOperand(1);
  ConstantSDNode *ShAmtC = isConstOrConstSplat(ShAmt);
  if (!ShAmtC || ShAmtC->getAPIntValue() != (VT.getScalarSizeInBits() - 1))
    return SDValue();

  // Eliminate the 'not' by adjusting the shift and add/sub constant:
  // add (srl (not X), 31), C --> add (sra X, 31), (C + 1)
  // sub C, (srl (not X), 31) --> add (srl X, 31), (C - 1)
  if (SDValue NewC = DAG.FoldConstantArithmetic(
          IsAdd ? ISD::ADD : ISD::SUB, DL, VT,
          {ConstantOp, DAG.getConstant(1, DL, VT)})) {
    SDValue NewShift = DAG.getNode(IsAdd ? ISD::SRA : ISD::SRL, DL, VT,
                                   Not.getOperand(0), ShAmt);
    return DAG.getNode(ISD::ADD, DL, VT, NewShift, NewC);
  }

  return SDValue();
}

static bool
areBitwiseNotOfEachother(SDValue Op0, SDValue Op1) {
  return (isBitwiseNot(Op0) && Op0.getOperand(0) == Op1) ||
         (isBitwiseNot(Op1) && Op1.getOperand(0) == Op0);
}

/// Try to fold a node that behaves like an ADD (note that N isn't necessarily
/// an ISD::ADD here, it could for example be an ISD::OR if we know that there
/// are no common bits set in the operands).
SDValue DAGCombiner::visitADDLike(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N0.getValueType();
  SDLoc DL(N);

  // fold (add x, undef) -> undef
  if (N0.isUndef())
    return N0;
  if (N1.isUndef())
    return N1;

  // fold (add c1, c2) -> c1+c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::ADD, DL, VT, {N0, N1}))
    return C;

  // canonicalize constant to RHS
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
      !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return DAG.getNode(ISD::ADD, DL, VT, N1, N0);

  if (areBitwiseNotOfEachother(N0, N1))
    return DAG.getConstant(APInt::getAllOnes(VT.getScalarSizeInBits()), DL, VT);

  // fold vector ops
  if (VT.isVector()) {
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

    // fold (add x, 0) -> x, vector edition
    if (ISD::isConstantSplatVectorAllZeros(N1.getNode()))
      return N0;
  }

  // fold (add x, 0) -> x
  if (isNullConstant(N1))
    return N0;

  if (N0.getOpcode() == ISD::SUB) {
    SDValue N00 = N0.getOperand(0);
    SDValue N01 = N0.getOperand(1);

    // fold ((A-c1)+c2) -> (A+(c2-c1))
    if (SDValue Sub = DAG.FoldConstantArithmetic(ISD::SUB, DL, VT, {N1, N01}))
      return DAG.getNode(ISD::ADD, DL, VT, N0.getOperand(0), Sub);

    // fold ((c1-A)+c2) -> (c1+c2)-A
    if (SDValue Add = DAG.FoldConstantArithmetic(ISD::ADD, DL, VT, {N1, N00}))
      return DAG.getNode(ISD::SUB, DL, VT, Add, N0.getOperand(1));
  }

  // add (sext i1 X), 1 -> zext (not i1 X)
  // We don't transform this pattern:
  //   add (zext i1 X), -1 -> sext (not i1 X)
  // because most (?) targets generate better code for the zext form.
  if (N0.getOpcode() == ISD::SIGN_EXTEND && N0.hasOneUse() &&
      isOneOrOneSplat(N1)) {
    SDValue X = N0.getOperand(0);
    if ((!LegalOperations ||
         (TLI.isOperationLegal(ISD::XOR, X.getValueType()) &&
          TLI.isOperationLegal(ISD::ZERO_EXTEND, VT))) &&
        X.getScalarValueSizeInBits() == 1) {
      SDValue Not = DAG.getNOT(DL, X, X.getValueType());
      return DAG.getNode(ISD::ZERO_EXTEND, DL, VT, Not);
    }
  }

  // Fold (add (or x, c0), c1) -> (add x, (c0 + c1))
  // iff (or x, c0) is equivalent to (add x, c0).
  // Fold (add (xor x, c0), c1) -> (add x, (c0 + c1))
  // iff (xor x, c0) is equivalent to (add x, c0).
  if (DAG.isADDLike(N0)) {
    SDValue N01 = N0.getOperand(1);
    if (SDValue Add = DAG.FoldConstantArithmetic(ISD::ADD, DL, VT, {N1, N01}))
      return DAG.getNode(ISD::ADD, DL, VT, N0.getOperand(0), Add);
  }

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  // reassociate add
  if (!reassociationCanBreakAddressingModePattern(ISD::ADD, DL, N, N0, N1)) {
    if (SDValue RADD = reassociateOps(ISD::ADD, DL, N0, N1, N->getFlags()))
      return RADD;

    // Reassociate (add (or x, c), y) -> (add add(x, y), c)) if (or x, c) is
    // equivalent to (add x, c).
    // Reassociate (add (xor x, c), y) -> (add add(x, y), c)) if (xor x, c) is
    // equivalent to (add x, c).
    // Do this optimization only when adding c does not introduce instructions
    // for adding carries.
    auto ReassociateAddOr = [&](SDValue N0, SDValue N1) {
      if (DAG.isADDLike(N0) && N0.hasOneUse() &&
          isConstantOrConstantVector(N0.getOperand(1), /* NoOpaque */ true)) {
        // If N0's type does not split or is a sign mask, it does not introduce
        // add carry.
        auto TyActn = TLI.getTypeAction(*DAG.getContext(), N0.getValueType());
        bool NoAddCarry = TyActn == TargetLoweringBase::TypeLegal ||
                          TyActn == TargetLoweringBase::TypePromoteInteger ||
                          isMinSignedConstant(N0.getOperand(1));
        if (NoAddCarry)
          return DAG.getNode(
              ISD::ADD, DL, VT,
              DAG.getNode(ISD::ADD, DL, VT, N1, N0.getOperand(0)),
              N0.getOperand(1));
      }
      return SDValue();
    };
    if (SDValue Add = ReassociateAddOr(N0, N1))
      return Add;
    if (SDValue Add = ReassociateAddOr(N1, N0))
      return Add;

    // Fold add(vecreduce(x), vecreduce(y)) -> vecreduce(add(x, y))
    if (SDValue SD =
            reassociateReduction(ISD::VECREDUCE_ADD, ISD::ADD, DL, VT, N0, N1))
      return SD;
  }

  SDValue A, B, C, D;

  // fold ((0-A) + B) -> B-A
  if (sd_match(N0, m_Neg(m_Value(A))))
    return DAG.getNode(ISD::SUB, DL, VT, N1, A);

  // fold (A + (0-B)) -> A-B
  if (sd_match(N1, m_Neg(m_Value(B))))
    return DAG.getNode(ISD::SUB, DL, VT, N0, B);

  // fold (A+(B-A)) -> B
  if (sd_match(N1, m_Sub(m_Value(B), m_Specific(N0))))
    return B;

  // fold ((B-A)+A) -> B
  if (sd_match(N0, m_Sub(m_Value(B), m_Specific(N1))))
    return B;

  // fold ((A-B)+(C-A)) -> (C-B)
  if (sd_match(N0, m_Sub(m_Value(A), m_Value(B))) &&
      sd_match(N1, m_Sub(m_Value(C), m_Specific(A))))
    return DAG.getNode(ISD::SUB, DL, VT, C, B);

  // fold ((A-B)+(B-C)) -> (A-C)
  if (sd_match(N0, m_Sub(m_Value(A), m_Value(B))) &&
      sd_match(N1, m_Sub(m_Specific(B), m_Value(C))))
    return DAG.getNode(ISD::SUB, DL, VT, A, C);

  // fold (A+(B-(A+C))) to (B-C)
  // fold (A+(B-(C+A))) to (B-C)
  if (sd_match(N1, m_Sub(m_Value(B), m_Add(m_Specific(N0), m_Value(C)))))
    return DAG.getNode(ISD::SUB, DL, VT, B, C);

  // fold (A+((B-A)+or-C)) to (B+or-C)
  if (sd_match(N1,
               m_AnyOf(m_Add(m_Sub(m_Value(B), m_Specific(N0)), m_Value(C)),
                       m_Sub(m_Sub(m_Value(B), m_Specific(N0)), m_Value(C)))))
    return DAG.getNode(N1.getOpcode(), DL, VT, B, C);

  // fold (A-B)+(C-D) to (A+C)-(B+D) when A or C is constant
  if (sd_match(N0, m_OneUse(m_Sub(m_Value(A), m_Value(B)))) &&
      sd_match(N1, m_OneUse(m_Sub(m_Value(C), m_Value(D)))) &&
      (isConstantOrConstantVector(A) || isConstantOrConstantVector(C)))
    return DAG.getNode(ISD::SUB, DL, VT,
                       DAG.getNode(ISD::ADD, SDLoc(N0), VT, A, C),
                       DAG.getNode(ISD::ADD, SDLoc(N1), VT, B, D));

  // fold (add (umax X, C), -C) --> (usubsat X, C)
  if (N0.getOpcode() == ISD::UMAX && hasOperation(ISD::USUBSAT, VT)) {
    auto MatchUSUBSAT = [](ConstantSDNode *Max, ConstantSDNode *Op) {
      return (!Max && !Op) ||
             (Max && Op && Max->getAPIntValue() == (-Op->getAPIntValue()));
    };
    if (ISD::matchBinaryPredicate(N0.getOperand(1), N1, MatchUSUBSAT,
                                  /*AllowUndefs*/ true))
      return DAG.getNode(ISD::USUBSAT, DL, VT, N0.getOperand(0),
                         N0.getOperand(1));
  }

  if (SimplifyDemandedBits(SDValue(N, 0)))
    return SDValue(N, 0);

  if (isOneOrOneSplat(N1)) {
    // fold (add (xor a, -1), 1) -> (sub 0, a)
    if (isBitwiseNot(N0))
      return DAG.getNode(ISD::SUB, DL, VT, DAG.getConstant(0, DL, VT),
                         N0.getOperand(0));

    // fold (add (add (xor a, -1), b), 1) -> (sub b, a)
    if (N0.getOpcode() == ISD::ADD) {
      SDValue A, Xor;

      if (isBitwiseNot(N0.getOperand(0))) {
        A = N0.getOperand(1);
        Xor = N0.getOperand(0);
      } else if (isBitwiseNot(N0.getOperand(1))) {
        A = N0.getOperand(0);
        Xor = N0.getOperand(1);
      }

      if (Xor)
        return DAG.getNode(ISD::SUB, DL, VT, A, Xor.getOperand(0));
    }

    // Look for:
    //   add (add x, y), 1
    // And if the target does not like this form then turn into:
    //   sub y, (xor x, -1)
    if (!TLI.preferIncOfAddToSubOfNot(VT) && N0.getOpcode() == ISD::ADD &&
        N0.hasOneUse() &&
        // Limit this to after legalization if the add has wrap flags
        (Level >= AfterLegalizeDAG || (!N->getFlags().hasNoUnsignedWrap() &&
                                       !N->getFlags().hasNoSignedWrap()))) {
      SDValue Not = DAG.getNOT(DL, N0.getOperand(0), VT);
      return DAG.getNode(ISD::SUB, DL, VT, N0.getOperand(1), Not);
    }
  }

  // (x - y) + -1  ->  add (xor y, -1), x
  if (N0.getOpcode() == ISD::SUB && N0.hasOneUse() &&
      isAllOnesOrAllOnesSplat(N1, /*AllowUndefs=*/true)) {
    SDValue Not = DAG.getNOT(DL, N0.getOperand(1), VT);
    return DAG.getNode(ISD::ADD, DL, VT, Not, N0.getOperand(0));
  }

  // Fold add(mul(add(A, CA), CM), CB) -> add(mul(A, CM), CM*CA+CB).
  // This can help if the inner add has multiple uses.
  APInt CM, CA;
  if (ConstantSDNode *CB = dyn_cast<ConstantSDNode>(N1)) {
    if (VT.getScalarSizeInBits() <= 64) {
      if (sd_match(N0, m_OneUse(m_Mul(m_Add(m_Value(A), m_ConstInt(CA)),
                                      m_ConstInt(CM)))) &&
          TLI.isLegalAddImmediate(
              (CA * CM + CB->getAPIntValue()).getSExtValue())) {
        SDNodeFlags Flags;
        // If all the inputs are nuw, the outputs can be nuw. If all the input
        // are _also_ nsw the outputs can be too.
        if (N->getFlags().hasNoUnsignedWrap() &&
            N0->getFlags().hasNoUnsignedWrap() &&
            N0.getOperand(0)->getFlags().hasNoUnsignedWrap()) {
          Flags |= SDNodeFlags::NoUnsignedWrap;
          if (N->getFlags().hasNoSignedWrap() &&
              N0->getFlags().hasNoSignedWrap() &&
              N0.getOperand(0)->getFlags().hasNoSignedWrap())
            Flags |= SDNodeFlags::NoSignedWrap;
        }
        SDValue Mul = DAG.getNode(ISD::MUL, SDLoc(N1), VT, A,
                                  DAG.getConstant(CM, DL, VT), Flags);
        return DAG.getNode(
            ISD::ADD, DL, VT, Mul,
            DAG.getConstant(CA * CM + CB->getAPIntValue(), DL, VT), Flags);
      }
      // Also look in case there is an intermediate add.
      if (sd_match(N0, m_OneUse(m_Add(
                           m_OneUse(m_Mul(m_Add(m_Value(A), m_ConstInt(CA)),
                                          m_ConstInt(CM))),
                           m_Value(B)))) &&
          TLI.isLegalAddImmediate(
              (CA * CM + CB->getAPIntValue()).getSExtValue())) {
        SDNodeFlags Flags;
        // If all the inputs are nuw, the outputs can be nuw. If all the input
        // are _also_ nsw the outputs can be too.
        SDValue OMul =
            N0.getOperand(0) == B ? N0.getOperand(1) : N0.getOperand(0);
        if (N->getFlags().hasNoUnsignedWrap() &&
            N0->getFlags().hasNoUnsignedWrap() &&
            OMul->getFlags().hasNoUnsignedWrap() &&
            OMul.getOperand(0)->getFlags().hasNoUnsignedWrap()) {
          Flags |= SDNodeFlags::NoUnsignedWrap;
          if (N->getFlags().hasNoSignedWrap() &&
              N0->getFlags().hasNoSignedWrap() &&
              OMul->getFlags().hasNoSignedWrap() &&
              OMul.getOperand(0)->getFlags().hasNoSignedWrap())
            Flags |= SDNodeFlags::NoSignedWrap;
        }
        SDValue Mul = DAG.getNode(ISD::MUL, SDLoc(N1), VT, A,
                                  DAG.getConstant(CM, DL, VT), Flags);
        SDValue Add = DAG.getNode(ISD::ADD, SDLoc(N1), VT, Mul, B, Flags);
        return DAG.getNode(
            ISD::ADD, DL, VT, Add,
            DAG.getConstant(CA * CM + CB->getAPIntValue(), DL, VT), Flags);
      }
    }
  }

  if (SDValue Combined = visitADDLikeCommutative(N0, N1, N))
    return Combined;

  if (SDValue Combined = visitADDLikeCommutative(N1, N0, N))
    return Combined;

  return SDValue();
}

// Attempt to form avgfloor(A, B) from (A & B) + ((A ^ B) >> 1)
SDValue DAGCombiner::foldAddToAvg(SDNode *N, const SDLoc &DL) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N0.getValueType();
  SDValue A, B;

  if ((!LegalOperations || hasOperation(ISD::AVGFLOORU, VT)) &&
      sd_match(N, m_Add(m_And(m_Value(A), m_Value(B)),
                        m_Srl(m_Xor(m_Deferred(A), m_Deferred(B)), m_One())))) {
    return DAG.getNode(ISD::AVGFLOORU, DL, VT, A, B);
  }
  if ((!LegalOperations || hasOperation(ISD::AVGFLOORS, VT)) &&
      sd_match(N, m_Add(m_And(m_Value(A), m_Value(B)),
                        m_Sra(m_Xor(m_Deferred(A), m_Deferred(B)), m_One())))) {
    return DAG.getNode(ISD::AVGFLOORS, DL, VT, A, B);
  }

  return SDValue();
}

SDValue DAGCombiner::visitADD(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N0.getValueType();
  SDLoc DL(N);

  if (SDValue Combined = visitADDLike(N))
    return Combined;

  if (SDValue V = foldAddSubBoolOfMaskedVal(N, DL, DAG))
    return V;

  if (SDValue V = foldAddSubOfSignBit(N, DL, DAG))
    return V;

  // Try to match AVGFLOOR fixedwidth pattern
  if (SDValue V = foldAddToAvg(N, DL))
    return V;

  // fold (a+b) -> (a|b) iff a and b share no bits.
  if ((!LegalOperations || TLI.isOperationLegal(ISD::OR, VT)) &&
      DAG.haveNoCommonBitsSet(N0, N1))
    return DAG.getNode(ISD::OR, DL, VT, N0, N1, SDNodeFlags::Disjoint);

  // Fold (add (vscale * C0), (vscale * C1)) to (vscale * (C0 + C1)).
  if (N0.getOpcode() == ISD::VSCALE && N1.getOpcode() == ISD::VSCALE) {
    const APInt &C0 = N0->getConstantOperandAPInt(0);
    const APInt &C1 = N1->getConstantOperandAPInt(0);
    return DAG.getVScale(DL, VT, C0 + C1);
  }

  // fold a+vscale(c1)+vscale(c2) -> a+vscale(c1+c2)
  if (N0.getOpcode() == ISD::ADD &&
      N0.getOperand(1).getOpcode() == ISD::VSCALE &&
      N1.getOpcode() == ISD::VSCALE) {
    const APInt &VS0 = N0.getOperand(1)->getConstantOperandAPInt(0);
    const APInt &VS1 = N1->getConstantOperandAPInt(0);
    SDValue VS = DAG.getVScale(DL, VT, VS0 + VS1);
    return DAG.getNode(ISD::ADD, DL, VT, N0.getOperand(0), VS);
  }

  // Fold (add step_vector(c1), step_vector(c2)  to step_vector(c1+c2))
  if (N0.getOpcode() == ISD::STEP_VECTOR &&
      N1.getOpcode() == ISD::STEP_VECTOR) {
    const APInt &C0 = N0->getConstantOperandAPInt(0);
    const APInt &C1 = N1->getConstantOperandAPInt(0);
    APInt NewStep = C0 + C1;
    return DAG.getStepVector(DL, VT, NewStep);
  }

  // Fold a + step_vector(c1) + step_vector(c2) to a + step_vector(c1+c2)
  if (N0.getOpcode() == ISD::ADD &&
      N0.getOperand(1).getOpcode() == ISD::STEP_VECTOR &&
      N1.getOpcode() == ISD::STEP_VECTOR) {
    const APInt &SV0 = N0.getOperand(1)->getConstantOperandAPInt(0);
    const APInt &SV1 = N1->getConstantOperandAPInt(0);
    APInt NewStep = SV0 + SV1;
    SDValue SV = DAG.getStepVector(DL, VT, NewStep);
    return DAG.getNode(ISD::ADD, DL, VT, N0.getOperand(0), SV);
  }

  return SDValue();
}

SDValue DAGCombiner::visitADDSAT(SDNode *N) {
  unsigned Opcode = N->getOpcode();
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N0.getValueType();
  bool IsSigned = Opcode == ISD::SADDSAT;
  SDLoc DL(N);

  // fold (add_sat x, undef) -> -1
  if (N0.isUndef() || N1.isUndef())
    return DAG.getAllOnesConstant(DL, VT);

  // fold (add_sat c1, c2) -> c3
  if (SDValue C = DAG.FoldConstantArithmetic(Opcode, DL, VT, {N0, N1}))
    return C;

  // canonicalize constant to RHS
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
      !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return DAG.getNode(Opcode, DL, VT, N1, N0);

  // fold vector ops
  if (VT.isVector()) {
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

    // fold (add_sat x, 0) -> x, vector edition
    if (ISD::isConstantSplatVectorAllZeros(N1.getNode()))
      return N0;
  }

  // fold (add_sat x, 0) -> x
  if (isNullConstant(N1))
    return N0;

  // If it cannot overflow, transform into an add.
  if (DAG.willNotOverflowAdd(IsSigned, N0, N1))
    return DAG.getNode(ISD::ADD, DL, VT, N0, N1);

  return SDValue();
}

static SDValue getAsCarry(const TargetLowering &TLI, SDValue V,
                          bool ForceCarryReconstruction = false) {
  bool Masked = false;

  // First, peel away TRUNCATE/ZERO_EXTEND/AND nodes due to legalization.
  while (true) {
    if (V.getOpcode() == ISD::TRUNCATE || V.getOpcode() == ISD::ZERO_EXTEND) {
      V = V.getOperand(0);
      continue;
    }

    if (V.getOpcode() == ISD::AND && isOneConstant(V.getOperand(1))) {
      if (ForceCarryReconstruction)
        return V;

      Masked = true;
      V = V.getOperand(0);
      continue;
    }

    if (ForceCarryReconstruction && V.getValueType() == MVT::i1)
      return V;

    break;
  }

  // If this is not a carry, return.
  if (V.getResNo() != 1)
    return SDValue();

  if (V.getOpcode() != ISD::UADDO_CARRY && V.getOpcode() != ISD::USUBO_CARRY &&
      V.getOpcode() != ISD::UADDO && V.getOpcode() != ISD::USUBO)
    return SDValue();

  EVT VT = V->getValueType(0);
  if (!TLI.isOperationLegalOrCustom(V.getOpcode(), VT))
    return SDValue();

  // If the result is masked, then no matter what kind of bool it is we can
  // return. If it isn't, then we need to make sure the bool type is either 0 or
  // 1 and not other values.
  if (Masked ||
      TLI.getBooleanContents(V.getValueType()) ==
          TargetLoweringBase::ZeroOrOneBooleanContent)
    return V;

  return SDValue();
}

/// Given the operands of an add/sub operation, see if the 2nd operand is a
/// masked 0/1 whose source operand is actually known to be 0/-1. If so, invert
/// the opcode and bypass the mask operation.
static SDValue foldAddSubMasked1(bool IsAdd, SDValue N0, SDValue N1,
                                 SelectionDAG &DAG, const SDLoc &DL) {
  if (N1.getOpcode() == ISD::ZERO_EXTEND)
    N1 = N1.getOperand(0);

  if (N1.getOpcode() != ISD::AND || !isOneOrOneSplat(N1->getOperand(1)))
    return SDValue();

  EVT VT = N0.getValueType();
  SDValue N10 = N1.getOperand(0);
  if (N10.getValueType() != VT && N10.getOpcode() == ISD::TRUNCATE)
    N10 = N10.getOperand(0);

  if (N10.getValueType() != VT)
    return SDValue();

  if (DAG.ComputeNumSignBits(N10) != VT.getScalarSizeInBits())
    return SDValue();

  // add N0, (and (AssertSext X, i1), 1) --> sub N0, X
  // sub N0, (and (AssertSext X, i1), 1) --> add N0, X
  return DAG.getNode(IsAdd ? ISD::SUB : ISD::ADD, DL, VT, N0, N10);
}

/// Helper for doing combines based on N0 and N1 being added to each other.
SDValue DAGCombiner::visitADDLikeCommutative(SDValue N0, SDValue N1,
                                             SDNode *LocReference) {
  EVT VT = N0.getValueType();
  SDLoc DL(LocReference);

  // fold (add x, shl(0 - y, n)) -> sub(x, shl(y, n))
  SDValue Y, N;
  if (sd_match(N1, m_Shl(m_Neg(m_Value(Y)), m_Value(N))))
    return DAG.getNode(ISD::SUB, DL, VT, N0,
                       DAG.getNode(ISD::SHL, DL, VT, Y, N));

  if (SDValue V = foldAddSubMasked1(true, N0, N1, DAG, DL))
    return V;

  // Look for:
  //   add (add x, 1), y
  // And if the target does not like this form then turn into:
  //   sub y, (xor x, -1)
  if (!TLI.preferIncOfAddToSubOfNot(VT) && N0.getOpcode() == ISD::ADD &&
      N0.hasOneUse() && isOneOrOneSplat(N0.getOperand(1)) &&
      // Limit this to after legalization if the add has wrap flags
      (Level >= AfterLegalizeDAG || (!N0->getFlags().hasNoUnsignedWrap() &&
                                     !N0->getFlags().hasNoSignedWrap()))) {
    SDValue Not = DAG.getNOT(DL, N0.getOperand(0), VT);
    return DAG.getNode(ISD::SUB, DL, VT, N1, Not);
  }

  if (N0.getOpcode() == ISD::SUB && N0.hasOneUse()) {
    // Hoist one-use subtraction by non-opaque constant:
    //   (x - C) + y  ->  (x + y) - C
    // This is necessary because SUB(X,C) -> ADD(X,-C) doesn't work for vectors.
    if (isConstantOrConstantVector(N0.getOperand(1), /*NoOpaques=*/true)) {
      SDValue Add = DAG.getNode(ISD::ADD, DL, VT, N0.getOperand(0), N1);
      return DAG.getNode(ISD::SUB, DL, VT, Add, N0.getOperand(1));
    }
    // Hoist one-use subtraction from non-opaque constant:
    //   (C - x) + y  ->  (y - x) + C
    if (isConstantOrConstantVector(N0.getOperand(0), /*NoOpaques=*/true)) {
      SDValue Sub = DAG.getNode(ISD::SUB, DL, VT, N1, N0.getOperand(1));
      return DAG.getNode(ISD::ADD, DL, VT, Sub, N0.getOperand(0));
    }
  }

  // add (mul x, C), x -> mul x, C+1
  if (N0.getOpcode() == ISD::MUL && N0.getOperand(0) == N1 &&
      isConstantOrConstantVector(N0.getOperand(1), /*NoOpaques=*/true) &&
      N0.hasOneUse()) {
    SDValue NewC = DAG.getNode(ISD::ADD, DL, VT, N0.getOperand(1),
                               DAG.getConstant(1, DL, VT));
    return DAG.getNode(ISD::MUL, DL, VT, N0.getOperand(0), NewC);
  }

  // If the target's bool is represented as 0/1, prefer to make this 'sub 0/1'
  // rather than 'add 0/-1' (the zext should get folded).
  // add (sext i1 Y), X --> sub X, (zext i1 Y)
  if (N0.getOpcode() == ISD::SIGN_EXTEND &&
      N0.getOperand(0).getScalarValueSizeInBits() == 1 &&
      TLI.getBooleanContents(VT) == TargetLowering::ZeroOrOneBooleanContent) {
    SDValue ZExt = DAG.getNode(ISD::ZERO_EXTEND, DL, VT, N0.getOperand(0));
    return DAG.getNode(ISD::SUB, DL, VT, N1, ZExt);
  }

  // add X, (sextinreg Y i1) -> sub X, (and Y 1)
  if (N1.getOpcode() == ISD::SIGN_EXTEND_INREG) {
    VTSDNode *TN = cast<VTSDNode>(N1.getOperand(1));
    if (TN->getVT() == MVT::i1) {
      SDValue ZExt = DAG.getNode(ISD::AND, DL, VT, N1.getOperand(0),
                                 DAG.getConstant(1, DL, VT));
      return DAG.getNode(ISD::SUB, DL, VT, N0, ZExt);
    }
  }

  // (add X, (uaddo_carry Y, 0, Carry)) -> (uaddo_carry X, Y, Carry)
  if (N1.getOpcode() == ISD::UADDO_CARRY && isNullConstant(N1.getOperand(1)) &&
      N1.getResNo() == 0)
    return DAG.getNode(ISD::UADDO_CARRY, DL, N1->getVTList(),
                       N0, N1.getOperand(0), N1.getOperand(2));

  // (add X, Carry) -> (uaddo_carry X, 0, Carry)
  if (TLI.isOperationLegalOrCustom(ISD::UADDO_CARRY, VT))
    if (SDValue Carry = getAsCarry(TLI, N1))
      return DAG.getNode(ISD::UADDO_CARRY, DL,
                         DAG.getVTList(VT, Carry.getValueType()), N0,
                         DAG.getConstant(0, DL, VT), Carry);

  return SDValue();
}

SDValue DAGCombiner::visitADDC(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N0.getValueType();
  SDLoc DL(N);

  // If the flag result is dead, turn this into an ADD.
  if (!N->hasAnyUseOfValue(1))
    return CombineTo(N, DAG.getNode(ISD::ADD, DL, VT, N0, N1),
                     DAG.getNode(ISD::CARRY_FALSE, DL, MVT::Glue));

  // canonicalize constant to RHS.
  ConstantSDNode *N0C = dyn_cast<ConstantSDNode>(N0);
  ConstantSDNode *N1C = dyn_cast<ConstantSDNode>(N1);
  if (N0C && !N1C)
    return DAG.getNode(ISD::ADDC, DL, N->getVTList(), N1, N0);

  // fold (addc x, 0) -> x + no carry out
  if (isNullConstant(N1))
    return CombineTo(N, N0, DAG.getNode(ISD::CARRY_FALSE,
                                        DL, MVT::Glue));

  // If it cannot overflow, transform into an add.
  if (DAG.computeOverflowForUnsignedAdd(N0, N1) == SelectionDAG::OFK_Never)
    return CombineTo(N, DAG.getNode(ISD::ADD, DL, VT, N0, N1),
                     DAG.getNode(ISD::CARRY_FALSE, DL, MVT::Glue));

  return SDValue();
}

/**
 * Flips a boolean if it is cheaper to compute. If the Force parameters is set,
 * then the flip also occurs if computing the inverse is the same cost.
 * This function returns an empty SDValue in case it cannot flip the boolean
 * without increasing the cost of the computation. If you want to flip a boolean
 * no matter what, use DAG.getLogicalNOT.
 */
static SDValue extractBooleanFlip(SDValue V, SelectionDAG &DAG,
                                  const TargetLowering &TLI,
                                  bool Force) {
  if (Force && isa<ConstantSDNode>(V))
    return DAG.getLogicalNOT(SDLoc(V), V, V.getValueType());

  if (V.getOpcode() != ISD::XOR)
    return SDValue();

  if (DAG.isBoolConstant(V.getOperand(1)) == true)
    return V.getOperand(0);
  if (Force && isConstOrConstSplat(V.getOperand(1), false))
    return DAG.getLogicalNOT(SDLoc(V), V, V.getValueType());
  return SDValue();
}

SDValue DAGCombiner::visitADDO(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N0.getValueType();
  bool IsSigned = (ISD::SADDO == N->getOpcode());

  EVT CarryVT = N->getValueType(1);
  SDLoc DL(N);

  // If the flag result is dead, turn this into an ADD.
  if (!N->hasAnyUseOfValue(1))
    return CombineTo(N, DAG.getNode(ISD::ADD, DL, VT, N0, N1),
                     DAG.getUNDEF(CarryVT));

  // canonicalize constant to RHS.
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
      !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return DAG.getNode(N->getOpcode(), DL, N->getVTList(), N1, N0);

  // fold (addo x, 0) -> x + no carry out
  if (isNullOrNullSplat(N1))
    return CombineTo(N, N0, DAG.getConstant(0, DL, CarryVT));

  // If it cannot overflow, transform into an add.
  if (DAG.willNotOverflowAdd(IsSigned, N0, N1))
    return CombineTo(N, DAG.getNode(ISD::ADD, DL, VT, N0, N1),
                     DAG.getConstant(0, DL, CarryVT));

  if (IsSigned) {
    // fold (saddo (xor a, -1), 1) -> (ssub 0, a).
    if (isBitwiseNot(N0) && isOneOrOneSplat(N1))
      return DAG.getNode(ISD::SSUBO, DL, N->getVTList(),
                         DAG.getConstant(0, DL, VT), N0.getOperand(0));
  } else {
    // fold (uaddo (xor a, -1), 1) -> (usub 0, a) and flip carry.
    if (isBitwiseNot(N0) && isOneOrOneSplat(N1)) {
      SDValue Sub = DAG.getNode(ISD::USUBO, DL, N->getVTList(),
                                DAG.getConstant(0, DL, VT), N0.getOperand(0));
      return CombineTo(
          N, Sub, DAG.getLogicalNOT(DL, Sub.getValue(1), Sub->getValueType(1)));
    }

    if (SDValue Combined = visitUADDOLike(N0, N1, N))
      return Combined;

    if (SDValue Combined = visitUADDOLike(N1, N0, N))
      return Combined;
  }

  return SDValue();
}

SDValue DAGCombiner::visitUADDOLike(SDValue N0, SDValue N1, SDNode *N) {
  EVT VT = N0.getValueType();
  if (VT.isVector())
    return SDValue();

  // (uaddo X, (uaddo_carry Y, 0, Carry)) -> (uaddo_carry X, Y, Carry)
  // If Y + 1 cannot overflow.
  if (N1.getOpcode() == ISD::UADDO_CARRY && isNullConstant(N1.getOperand(1))) {
    SDValue Y = N1.getOperand(0);
    SDValue One = DAG.getConstant(1, SDLoc(N), Y.getValueType());
    if (DAG.computeOverflowForUnsignedAdd(Y, One) == SelectionDAG::OFK_Never)
      return DAG.getNode(ISD::UADDO_CARRY, SDLoc(N), N->getVTList(), N0, Y,
                         N1.getOperand(2));
  }

  // (uaddo X, Carry) -> (uaddo_carry X, 0, Carry)
  if (TLI.isOperationLegalOrCustom(ISD::UADDO_CARRY, VT))
    if (SDValue Carry = getAsCarry(TLI, N1))
      return DAG.getNode(ISD::UADDO_CARRY, SDLoc(N), N->getVTList(), N0,
                         DAG.getConstant(0, SDLoc(N), VT), Carry);

  return SDValue();
}

SDValue DAGCombiner::visitADDE(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue CarryIn = N->getOperand(2);

  // canonicalize constant to RHS
  ConstantSDNode *N0C = dyn_cast<ConstantSDNode>(N0);
  ConstantSDNode *N1C = dyn_cast<ConstantSDNode>(N1);
  if (N0C && !N1C)
    return DAG.getNode(ISD::ADDE, SDLoc(N), N->getVTList(),
                       N1, N0, CarryIn);

  // fold (adde x, y, false) -> (addc x, y)
  if (CarryIn.getOpcode() == ISD::CARRY_FALSE)
    return DAG.getNode(ISD::ADDC, SDLoc(N), N->getVTList(), N0, N1);

  return SDValue();
}

SDValue DAGCombiner::visitUADDO_CARRY(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue CarryIn = N->getOperand(2);
  SDLoc DL(N);

  // canonicalize constant to RHS
  ConstantSDNode *N0C = dyn_cast<ConstantSDNode>(N0);
  ConstantSDNode *N1C = dyn_cast<ConstantSDNode>(N1);
  if (N0C && !N1C)
    return DAG.getNode(ISD::UADDO_CARRY, DL, N->getVTList(), N1, N0, CarryIn);

  // fold (uaddo_carry x, y, false) -> (uaddo x, y)
  if (isNullConstant(CarryIn)) {
    if (!LegalOperations ||
        TLI.isOperationLegalOrCustom(ISD::UADDO, N->getValueType(0)))
      return DAG.getNode(ISD::UADDO, DL, N->getVTList(), N0, N1);
  }

  // fold (uaddo_carry 0, 0, X) -> (and (ext/trunc X), 1) and no carry.
  if (isNullConstant(N0) && isNullConstant(N1)) {
    EVT VT = N0.getValueType();
    EVT CarryVT = CarryIn.getValueType();
    SDValue CarryExt = DAG.getBoolExtOrTrunc(CarryIn, DL, VT, CarryVT);
    AddToWorklist(CarryExt.getNode());
    return CombineTo(N, DAG.getNode(ISD::AND, DL, VT, CarryExt,
                                    DAG.getConstant(1, DL, VT)),
                     DAG.getConstant(0, DL, CarryVT));
  }

  if (SDValue Combined = visitUADDO_CARRYLike(N0, N1, CarryIn, N))
    return Combined;

  if (SDValue Combined = visitUADDO_CARRYLike(N1, N0, CarryIn, N))
    return Combined;

  // We want to avoid useless duplication.
  // TODO: This is done automatically for binary operations. As UADDO_CARRY is
  // not a binary operation, this is not really possible to leverage this
  // existing mechanism for it. However, if more operations require the same
  // deduplication logic, then it may be worth generalize.
  SDValue Ops[] = {N1, N0, CarryIn};
  SDNode *CSENode =
      DAG.getNodeIfExists(ISD::UADDO_CARRY, N->getVTList(), Ops, N->getFlags());
  if (CSENode)
    return SDValue(CSENode, 0);

  return SDValue();
}

/**
 * If we are facing some sort of diamond carry propagation pattern try to
 * break it up to generate something like:
 *   (uaddo_carry X, 0, (uaddo_carry A, B, Z):Carry)
 *
 * The end result is usually an increase in operation required, but because the
 * carry is now linearized, other transforms can kick in and optimize the DAG.
 *
 * Patterns typically look something like
 *                (uaddo A, B)
 *                /          \
 *             Carry         Sum
 *               |             \
 *               | (uaddo_carry *, 0, Z)
 *               |       /
 *                \   Carry
 *                 |   /
 * (uaddo_carry X, *, *)
 *
 * But numerous variation exist. Our goal is to identify A, B, X and Z and
 * produce a combine with a single path for carry propagation.
 */
static SDValue combineUADDO_CARRYDiamond(DAGCombiner &Combiner,
                                         SelectionDAG &DAG, SDValue X,
                                         SDValue Carry0, SDValue Carry1,
                                         SDNode *N) {
  if (Carry1.getResNo() != 1 || Carry0.getResNo() != 1)
    return SDValue();
  if (Carry1.getOpcode() != ISD::UADDO)
    return SDValue();

  SDValue Z;

  /**
   * First look for a suitable Z. It will present itself in the form of
   * (uaddo_carry Y, 0, Z) or its equivalent (uaddo Y, 1) for Z=true
   */
  if (Carry0.getOpcode() == ISD::UADDO_CARRY &&
      isNullConstant(Carry0.getOperand(1))) {
    Z = Carry0.getOperand(2);
  } else if (Carry0.getOpcode() == ISD::UADDO &&
             isOneConstant(Carry0.getOperand(1))) {
    EVT VT = Carry0->getValueType(1);
    Z = DAG.getConstant(1, SDLoc(Carry0.getOperand(1)), VT);
  } else {
    // We couldn't find a suitable Z.
    return SDValue();
  }


  auto cancelDiamond = [&](SDValue A,SDValue B) {
    SDLoc DL(N);
    SDValue NewY =
        DAG.getNode(ISD::UADDO_CARRY, DL, Carry0->getVTList(), A, B, Z);
    Combiner.AddToWorklist(NewY.getNode());
    return DAG.getNode(ISD::UADDO_CARRY, DL, N->getVTList(), X,
                       DAG.getConstant(0, DL, X.getValueType()),
                       NewY.getValue(1));
  };

  /**
   *         (uaddo A, B)
   *              |
   *             Sum
   *              |
   * (uaddo_carry *, 0, Z)
   */
  if (Carry0.getOperand(0) == Carry1.getValue(0)) {
    return cancelDiamond(Carry1.getOperand(0), Carry1.getOperand(1));
  }

  /**
   * (uaddo_carry A, 0, Z)
   *         |
   *        Sum
   *         |
   *  (uaddo *, B)
   */
  if (Carry1.getOperand(0) == Carry0.getValue(0)) {
    return cancelDiamond(Carry0.getOperand(0), Carry1.getOperand(1));
  }

  if (Carry1.getOperand(1) == Carry0.getValue(0)) {
    return cancelDiamond(Carry1.getOperand(0), Carry0.getOperand(0));
  }

  return SDValue();
}

// If we are facing some sort of diamond carry/borrow in/out pattern try to
// match patterns like:
//
//          (uaddo A, B)            CarryIn
//            |  \                     |
//            |   \                    |
//    PartialSum   PartialCarryOutX   /
//            |        |             /
//            |    ____|____________/
//            |   /    |
//     (uaddo *, *)    \________
//       |  \                   \
//       |   \                   |
//       |    PartialCarryOutY   |
//       |        \              |
//       |         \            /
//   AddCarrySum    |    ______/
//                  |   /
//   CarryOut = (or *, *)
//
// And generate UADDO_CARRY (or USUBO_CARRY) with two result values:
//
//    {AddCarrySum, CarryOut} = (uaddo_carry A, B, CarryIn)
//
// Our goal is to identify A, B, and CarryIn and produce UADDO_CARRY/USUBO_CARRY
// with a single path for carry/borrow out propagation.
static SDValue combineCarryDiamond(SelectionDAG &DAG, const TargetLowering &TLI,
                                   SDValue N0, SDValue N1, SDNode *N) {
  SDValue Carry0 = getAsCarry(TLI, N0);
  if (!Carry0)
    return SDValue();
  SDValue Carry1 = getAsCarry(TLI, N1);
  if (!Carry1)
    return SDValue();

  unsigned Opcode = Carry0.getOpcode();
  if (Opcode != Carry1.getOpcode())
    return SDValue();
  if (Opcode != ISD::UADDO && Opcode != ISD::USUBO)
    return SDValue();
  // Guarantee identical type of CarryOut
  EVT CarryOutType = N->getValueType(0);
  if (CarryOutType != Carry0.getValue(1).getValueType() ||
      CarryOutType != Carry1.getValue(1).getValueType())
    return SDValue();

  // Canonicalize the add/sub of A and B (the top node in the above ASCII art)
  // as Carry0 and the add/sub of the carry in as Carry1 (the middle node).
  if (Carry1.getNode()->isOperandOf(Carry0.getNode()))
    std::swap(Carry0, Carry1);

  // Check if nodes are connected in expected way.
  if (Carry1.getOperand(0) != Carry0.getValue(0) &&
      Carry1.getOperand(1) != Carry0.getValue(0))
    return SDValue();

  // The carry in value must be on the righthand side for subtraction.
  unsigned CarryInOperandNum =
      Carry1.getOperand(0) == Carry0.getValue(0) ? 1 : 0;
  if (Opcode == ISD::USUBO && CarryInOperandNum != 1)
    return SDValue();
  SDValue CarryIn = Carry1.getOperand(CarryInOperandNum);

  unsigned NewOp = Opcode == ISD::UADDO ? ISD::UADDO_CARRY : ISD::USUBO_CARRY;
  if (!TLI.isOperationLegalOrCustom(NewOp, Carry0.getValue(0).getValueType()))
    return SDValue();

  // Verify that the carry/borrow in is plausibly a carry/borrow bit.
  CarryIn = getAsCarry(TLI, CarryIn, true);
  if (!CarryIn)
    return SDValue();

  SDLoc DL(N);
  CarryIn = DAG.getBoolExtOrTrunc(CarryIn, DL, Carry1->getValueType(1),
                                  Carry1->getValueType(0));
  SDValue Merged =
      DAG.getNode(NewOp, DL, Carry1->getVTList(), Carry0.getOperand(0),
                  Carry0.getOperand(1), CarryIn);

  // Please note that because we have proven that the result of the UADDO/USUBO
  // of A and B feeds into the UADDO/USUBO that does the carry/borrow in, we can
  // therefore prove that if the first UADDO/USUBO overflows, the second
  // UADDO/USUBO cannot. For example consider 8-bit numbers where 0xFF is the
  // maximum value.
  //
  //   0xFF + 0xFF == 0xFE with carry but 0xFE + 1 does not carry
  //   0x00 - 0xFF == 1 with a carry/borrow but 1 - 1 == 0 (no carry/borrow)
  //
  // This is important because it means that OR and XOR can be used to merge
  // carry flags; and that AND can return a constant zero.
  //
  // TODO: match other operations that can merge flags (ADD, etc)
  DAG.ReplaceAllUsesOfValueWith(Carry1.getValue(0), Merged.getValue(0));
  if (N->getOpcode() == ISD::AND)
    return DAG.getConstant(0, DL, CarryOutType);
  return Merged.getValue(1);
}

SDValue DAGCombiner::visitUADDO_CARRYLike(SDValue N0, SDValue N1,
                                          SDValue CarryIn, SDNode *N) {
  // fold (uaddo_carry (xor a, -1), b, c) -> (usubo_carry b, a, !c) and flip
  // carry.
  if (isBitwiseNot(N0))
    if (SDValue NotC = extractBooleanFlip(CarryIn, DAG, TLI, true)) {
      SDLoc DL(N);
      SDValue Sub = DAG.getNode(ISD::USUBO_CARRY, DL, N->getVTList(), N1,
                                N0.getOperand(0), NotC);
      return CombineTo(
          N, Sub, DAG.getLogicalNOT(DL, Sub.getValue(1), Sub->getValueType(1)));
    }

  // Iff the flag result is dead:
  // (uaddo_carry (add|uaddo X, Y), 0, Carry) -> (uaddo_carry X, Y, Carry)
  // Don't do this if the Carry comes from the uaddo. It won't remove the uaddo
  // or the dependency between the instructions.
  if ((N0.getOpcode() == ISD::ADD ||
       (N0.getOpcode() == ISD::UADDO && N0.getResNo() == 0 &&
        N0.getValue(1) != CarryIn)) &&
      isNullConstant(N1) && !N->hasAnyUseOfValue(1))
    return DAG.getNode(ISD::UADDO_CARRY, SDLoc(N), N->getVTList(),
                       N0.getOperand(0), N0.getOperand(1), CarryIn);

  /**
   * When one of the uaddo_carry argument is itself a carry, we may be facing
   * a diamond carry propagation. In which case we try to transform the DAG
   * to ensure linear carry propagation if that is possible.
   */
  if (auto Y = getAsCarry(TLI, N1)) {
    // Because both are carries, Y and Z can be swapped.
    if (auto R = combineUADDO_CARRYDiamond(*this, DAG, N0, Y, CarryIn, N))
      return R;
    if (auto R = combineUADDO_CARRYDiamond(*this, DAG, N0, CarryIn, Y, N))
      return R;
  }

  return SDValue();
}

SDValue DAGCombiner::visitSADDO_CARRYLike(SDValue N0, SDValue N1,
                                          SDValue CarryIn, SDNode *N) {
  // fold (saddo_carry (xor a, -1), b, c) -> (ssubo_carry b, a, !c)
  if (isBitwiseNot(N0)) {
    if (SDValue NotC = extractBooleanFlip(CarryIn, DAG, TLI, true))
      return DAG.getNode(ISD::SSUBO_CARRY, SDLoc(N), N->getVTList(), N1,
                         N0.getOperand(0), NotC);
  }

  return SDValue();
}

SDValue DAGCombiner::visitSADDO_CARRY(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue CarryIn = N->getOperand(2);
  SDLoc DL(N);

  // canonicalize constant to RHS
  ConstantSDNode *N0C = dyn_cast<ConstantSDNode>(N0);
  ConstantSDNode *N1C = dyn_cast<ConstantSDNode>(N1);
  if (N0C && !N1C)
    return DAG.getNode(ISD::SADDO_CARRY, DL, N->getVTList(), N1, N0, CarryIn);

  // fold (saddo_carry x, y, false) -> (saddo x, y)
  if (isNullConstant(CarryIn)) {
    if (!LegalOperations ||
        TLI.isOperationLegalOrCustom(ISD::SADDO, N->getValueType(0)))
      return DAG.getNode(ISD::SADDO, DL, N->getVTList(), N0, N1);
  }

  if (SDValue Combined = visitSADDO_CARRYLike(N0, N1, CarryIn, N))
    return Combined;

  if (SDValue Combined = visitSADDO_CARRYLike(N1, N0, CarryIn, N))
    return Combined;

  return SDValue();
}

// Attempt to create a USUBSAT(LHS, RHS) node with DstVT, performing a
// clamp/truncation if necessary.
static SDValue getTruncatedUSUBSAT(EVT DstVT, EVT SrcVT, SDValue LHS,
                                   SDValue RHS, SelectionDAG &DAG,
                                   const SDLoc &DL) {
  assert(DstVT.getScalarSizeInBits() <= SrcVT.getScalarSizeInBits() &&
         "Illegal truncation");

  if (DstVT == SrcVT)
    return DAG.getNode(ISD::USUBSAT, DL, DstVT, LHS, RHS);

  // If the LHS is zero-extended then we can perform the USUBSAT as DstVT by
  // clamping RHS.
  APInt UpperBits = APInt::getBitsSetFrom(SrcVT.getScalarSizeInBits(),
                                          DstVT.getScalarSizeInBits());
  if (!DAG.MaskedValueIsZero(LHS, UpperBits))
    return SDValue();

  SDValue SatLimit =
      DAG.getConstant(APInt::getLowBitsSet(SrcVT.getScalarSizeInBits(),
                                           DstVT.getScalarSizeInBits()),
                      DL, SrcVT);
  RHS = DAG.getNode(ISD::UMIN, DL, SrcVT, RHS, SatLimit);
  RHS = DAG.getNode(ISD::TRUNCATE, DL, DstVT, RHS);
  LHS = DAG.getNode(ISD::TRUNCATE, DL, DstVT, LHS);
  return DAG.getNode(ISD::USUBSAT, DL, DstVT, LHS, RHS);
}

// Try to find umax(a,b) - b or a - umin(a,b) patterns that may be converted to
// usubsat(a,b), optionally as a truncated type.
SDValue DAGCombiner::foldSubToUSubSat(EVT DstVT, SDNode *N, const SDLoc &DL) {
  if (N->getOpcode() != ISD::SUB ||
      !(!LegalOperations || hasOperation(ISD::USUBSAT, DstVT)))
    return SDValue();

  EVT SubVT = N->getValueType(0);
  SDValue Op0 = N->getOperand(0);
  SDValue Op1 = N->getOperand(1);

  // Try to find umax(a,b) - b or a - umin(a,b) patterns
  // they may be converted to usubsat(a,b).
  if (Op0.getOpcode() == ISD::UMAX && Op0.hasOneUse()) {
    SDValue MaxLHS = Op0.getOperand(0);
    SDValue MaxRHS = Op0.getOperand(1);
    if (MaxLHS == Op1)
      return getTruncatedUSUBSAT(DstVT, SubVT, MaxRHS, Op1, DAG, DL);
    if (MaxRHS == Op1)
      return getTruncatedUSUBSAT(DstVT, SubVT, MaxLHS, Op1, DAG, DL);
  }

  if (Op1.getOpcode() == ISD::UMIN && Op1.hasOneUse()) {
    SDValue MinLHS = Op1.getOperand(0);
    SDValue MinRHS = Op1.getOperand(1);
    if (MinLHS == Op0)
      return getTruncatedUSUBSAT(DstVT, SubVT, Op0, MinRHS, DAG, DL);
    if (MinRHS == Op0)
      return getTruncatedUSUBSAT(DstVT, SubVT, Op0, MinLHS, DAG, DL);
  }

  // sub(a,trunc(umin(zext(a),b))) -> usubsat(a,trunc(umin(b,SatLimit)))
  if (Op1.getOpcode() == ISD::TRUNCATE &&
      Op1.getOperand(0).getOpcode() == ISD::UMIN &&
      Op1.getOperand(0).hasOneUse()) {
    SDValue MinLHS = Op1.getOperand(0).getOperand(0);
    SDValue MinRHS = Op1.getOperand(0).getOperand(1);
    if (MinLHS.getOpcode() == ISD::ZERO_EXTEND && MinLHS.getOperand(0) == Op0)
      return getTruncatedUSUBSAT(DstVT, MinLHS.getValueType(), MinLHS, MinRHS,
                                 DAG, DL);
    if (MinRHS.getOpcode() == ISD::ZERO_EXTEND && MinRHS.getOperand(0) == Op0)
      return getTruncatedUSUBSAT(DstVT, MinLHS.getValueType(), MinRHS, MinLHS,
                                 DAG, DL);
  }

  return SDValue();
}

// Refinement of DAG/Type Legalisation (promotion) when CTLZ is used for
// counting leading ones. Broadly, it replaces the substraction with a left
// shift.
//
// * DAG Legalisation Pattern:
//
//     (sub (ctlz (zeroextend (not Src)))
//          BitWidthDiff)
//
//       if BitWidthDiff == BitWidth(Node) - BitWidth(Src)
//       -->
//
//     (ctlz_zero_undef (not (shl (anyextend Src)
//                                BitWidthDiff)))
//
// * Type Legalisation Pattern:
//
//     (sub (ctlz (and (xor Src XorMask)
//                     AndMask))
//          BitWidthDiff)
//
//       if AndMask has only trailing ones
//       and MaskBitWidth(AndMask) == BitWidth(Node) - BitWidthDiff
//       and XorMask has more trailing ones than AndMask
//       -->
//
//     (ctlz_zero_undef (not (shl Src BitWidthDiff)))
template <class MatchContextClass>
static SDValue foldSubCtlzNot(SDNode *N, SelectionDAG &DAG) {
  const SDLoc DL(N);
  SDValue N0 = N->getOperand(0);
  EVT VT = N0.getValueType();
  unsigned BitWidth = VT.getScalarSizeInBits();

  MatchContextClass Matcher(DAG, DAG.getTargetLoweringInfo(), N);

  APInt AndMask;
  APInt XorMask;
  APInt BitWidthDiff;

  SDValue CtlzOp;
  SDValue Src;

  if (!sd_context_match(
          N, Matcher, m_Sub(m_Ctlz(m_Value(CtlzOp)), m_ConstInt(BitWidthDiff))))
    return SDValue();

  if (sd_context_match(CtlzOp, Matcher, m_ZExt(m_Not(m_Value(Src))))) {
    // DAG Legalisation Pattern:
    // (sub (ctlz (zero_extend (not Op)) BitWidthDiff))
    if ((BitWidth - Src.getValueType().getScalarSizeInBits()) != BitWidthDiff)
      return SDValue();

    Src = DAG.getNode(ISD::ANY_EXTEND, DL, VT, Src);
  } else if (sd_context_match(CtlzOp, Matcher,
                              m_And(m_Xor(m_Value(Src), m_ConstInt(XorMask)),
                                    m_ConstInt(AndMask)))) {
    // Type Legalisation Pattern:
    // (sub (ctlz (and (xor Op XorMask) AndMask)) BitWidthDiff)
    unsigned AndMaskWidth = BitWidth - BitWidthDiff.getZExtValue();
    if (!(AndMask.isMask(AndMaskWidth) && XorMask.countr_one() >= AndMaskWidth))
      return SDValue();
  } else
    return SDValue();

  SDValue ShiftConst = DAG.getShiftAmountConstant(BitWidthDiff, VT, DL);
  SDValue LShift = Matcher.getNode(ISD::SHL, DL, VT, Src, ShiftConst);
  SDValue Not =
      Matcher.getNode(ISD::XOR, DL, VT, LShift, DAG.getAllOnesConstant(DL, VT));

  return Matcher.getNode(ISD::CTLZ_ZERO_UNDEF, DL, VT, Not);
}

// Since it may not be valid to emit a fold to zero for vector initializers
// check if we can before folding.
static SDValue tryFoldToZero(const SDLoc &DL, const TargetLowering &TLI, EVT VT,
                             SelectionDAG &DAG, bool LegalOperations) {
  if (!VT.isVector())
    return DAG.getConstant(0, DL, VT);
  if (!LegalOperations || TLI.isOperationLegal(ISD::BUILD_VECTOR, VT))
    return DAG.getConstant(0, DL, VT);
  return SDValue();
}

SDValue DAGCombiner::visitSUB(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N0.getValueType();
  unsigned BitWidth = VT.getScalarSizeInBits();
  SDLoc DL(N);

  auto PeekThroughFreeze = [](SDValue N) {
    if (N->getOpcode() == ISD::FREEZE && N.hasOneUse())
      return N->getOperand(0);
    return N;
  };

  if (SDValue V = foldSubCtlzNot<EmptyMatchContext>(N, DAG))
    return V;

  // fold (sub x, x) -> 0
  // FIXME: Refactor this and xor and other similar operations together.
  if (PeekThroughFreeze(N0) == PeekThroughFreeze(N1))
    return tryFoldToZero(DL, TLI, VT, DAG, LegalOperations);

  // fold (sub c1, c2) -> c3
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::SUB, DL, VT, {N0, N1}))
    return C;

  // fold vector ops
  if (VT.isVector()) {
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

    // fold (sub x, 0) -> x, vector edition
    if (ISD::isConstantSplatVectorAllZeros(N1.getNode()))
      return N0;
  }

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  // fold (sub x, c) -> (add x, -c)
  if (ConstantSDNode *N1C = getAsNonOpaqueConstant(N1))
    return DAG.getNode(ISD::ADD, DL, VT, N0,
                       DAG.getConstant(-N1C->getAPIntValue(), DL, VT));

  if (isNullOrNullSplat(N0)) {
    // Right-shifting everything out but the sign bit followed by negation is
    // the same as flipping arithmetic/logical shift type without the negation:
    // -(X >>u 31) -> (X >>s 31)
    // -(X >>s 31) -> (X >>u 31)
    if (N1->getOpcode() == ISD::SRA || N1->getOpcode() == ISD::SRL) {
      ConstantSDNode *ShiftAmt = isConstOrConstSplat(N1.getOperand(1));
      if (ShiftAmt && ShiftAmt->getAPIntValue() == (BitWidth - 1)) {
        auto NewSh = N1->getOpcode() == ISD::SRA ? ISD::SRL : ISD::SRA;
        if (!LegalOperations || TLI.isOperationLegal(NewSh, VT))
          return DAG.getNode(NewSh, DL, VT, N1.getOperand(0), N1.getOperand(1));
      }
    }

    // 0 - X --> 0 if the sub is NUW.
    if (N->getFlags().hasNoUnsignedWrap())
      return N0;

    if (DAG.MaskedValueIsZero(N1, ~APInt::getSignMask(BitWidth))) {
      // N1 is either 0 or the minimum signed value. If the sub is NSW, then
      // N1 must be 0 because negating the minimum signed value is undefined.
      if (N->getFlags().hasNoSignedWrap())
        return N0;

      // 0 - X --> X if X is 0 or the minimum signed value.
      return N1;
    }

    // Convert 0 - abs(x).
    if (N1.getOpcode() == ISD::ABS && N1.hasOneUse() &&
        !TLI.isOperationLegalOrCustom(ISD::ABS, VT))
      if (SDValue Result = TLI.expandABS(N1.getNode(), DAG, true))
        return Result;

    // Fold neg(splat(neg(x)) -> splat(x)
    if (VT.isVector()) {
      SDValue N1S = DAG.getSplatValue(N1, true);
      if (N1S && N1S.getOpcode() == ISD::SUB &&
          isNullConstant(N1S.getOperand(0)))
        return DAG.getSplat(VT, DL, N1S.getOperand(1));
    }
  }

  // Canonicalize (sub -1, x) -> ~x, i.e. (xor x, -1)
  if (isAllOnesOrAllOnesSplat(N0))
    return DAG.getNode(ISD::XOR, DL, VT, N1, N0);

  // fold (A - (0-B)) -> A+B
  if (N1.getOpcode() == ISD::SUB && isNullOrNullSplat(N1.getOperand(0)))
    return DAG.getNode(ISD::ADD, DL, VT, N0, N1.getOperand(1));

  // fold A-(A-B) -> B
  if (N1.getOpcode() == ISD::SUB && N0 == N1.getOperand(0))
    return N1.getOperand(1);

  // fold (A+B)-A -> B
  if (N0.getOpcode() == ISD::ADD && N0.getOperand(0) == N1)
    return N0.getOperand(1);

  // fold (A+B)-B -> A
  if (N0.getOpcode() == ISD::ADD && N0.getOperand(1) == N1)
    return N0.getOperand(0);

  // fold (A+C1)-C2 -> A+(C1-C2)
  if (N0.getOpcode() == ISD::ADD) {
    SDValue N01 = N0.getOperand(1);
    if (SDValue NewC = DAG.FoldConstantArithmetic(ISD::SUB, DL, VT, {N01, N1}))
      return DAG.getNode(ISD::ADD, DL, VT, N0.getOperand(0), NewC);
  }

  // fold C2-(A+C1) -> (C2-C1)-A
  if (N1.getOpcode() == ISD::ADD) {
    SDValue N11 = N1.getOperand(1);
    if (SDValue NewC = DAG.FoldConstantArithmetic(ISD::SUB, DL, VT, {N0, N11}))
      return DAG.getNode(ISD::SUB, DL, VT, NewC, N1.getOperand(0));
  }

  // fold (A-C1)-C2 -> A-(C1+C2)
  if (N0.getOpcode() == ISD::SUB) {
    SDValue N01 = N0.getOperand(1);
    if (SDValue NewC = DAG.FoldConstantArithmetic(ISD::ADD, DL, VT, {N01, N1}))
      return DAG.getNode(ISD::SUB, DL, VT, N0.getOperand(0), NewC);
  }

  // fold (c1-A)-c2 -> (c1-c2)-A
  if (N0.getOpcode() == ISD::SUB) {
    SDValue N00 = N0.getOperand(0);
    if (SDValue NewC = DAG.FoldConstantArithmetic(ISD::SUB, DL, VT, {N00, N1}))
      return DAG.getNode(ISD::SUB, DL, VT, NewC, N0.getOperand(1));
  }

  SDValue A, B, C;

  // fold ((A+(B+C))-B) -> A+C
  if (sd_match(N0, m_Add(m_Value(A), m_Add(m_Specific(N1), m_Value(C)))))
    return DAG.getNode(ISD::ADD, DL, VT, A, C);

  // fold ((A+(B-C))-B) -> A-C
  if (sd_match(N0, m_Add(m_Value(A), m_Sub(m_Specific(N1), m_Value(C)))))
    return DAG.getNode(ISD::SUB, DL, VT, A, C);

  // fold ((A-(B-C))-C) -> A-B
  if (sd_match(N0, m_Sub(m_Value(A), m_Sub(m_Value(B), m_Specific(N1)))))
    return DAG.getNode(ISD::SUB, DL, VT, A, B);

  // fold (A-(B-C)) -> A+(C-B)
  if (sd_match(N1, m_OneUse(m_Sub(m_Value(B), m_Value(C)))))
    return DAG.getNode(ISD::ADD, DL, VT, N0,
                       DAG.getNode(ISD::SUB, DL, VT, C, B));

  // A - (A & B)  ->  A & (~B)
  if (sd_match(N1, m_And(m_Specific(N0), m_Value(B))) &&
      (N1.hasOneUse() || isConstantOrConstantVector(B, /*NoOpaques=*/true)))
    return DAG.getNode(ISD::AND, DL, VT, N0, DAG.getNOT(DL, B, VT));

  // fold (A - (-B * C)) -> (A + (B * C))
  if (sd_match(N1, m_OneUse(m_Mul(m_Neg(m_Value(B)), m_Value(C)))))
    return DAG.getNode(ISD::ADD, DL, VT, N0,
                       DAG.getNode(ISD::MUL, DL, VT, B, C));

  // If either operand of a sub is undef, the result is undef
  if (N0.isUndef())
    return N0;
  if (N1.isUndef())
    return N1;

  if (SDValue V = foldAddSubBoolOfMaskedVal(N, DL, DAG))
    return V;

  if (SDValue V = foldAddSubOfSignBit(N, DL, DAG))
    return V;

  // Try to match AVGCEIL fixedwidth pattern
  if (SDValue V = foldSubToAvg(N, DL))
    return V;

  if (SDValue V = foldAddSubMasked1(false, N0, N1, DAG, DL))
    return V;

  if (SDValue V = foldSubToUSubSat(VT, N, DL))
    return V;

  // (A - B) - 1  ->  add (xor B, -1), A
  if (sd_match(N, m_Sub(m_OneUse(m_Sub(m_Value(A), m_Value(B))), m_One())))
    return DAG.getNode(ISD::ADD, DL, VT, A, DAG.getNOT(DL, B, VT));

  // Look for:
  //   sub y, (xor x, -1)
  // And if the target does not like this form then turn into:
  //   add (add x, y), 1
  if (TLI.preferIncOfAddToSubOfNot(VT) && N1.hasOneUse() && isBitwiseNot(N1)) {
    SDValue Add = DAG.getNode(ISD::ADD, DL, VT, N0, N1.getOperand(0));
    return DAG.getNode(ISD::ADD, DL, VT, Add, DAG.getConstant(1, DL, VT));
  }

  // Hoist one-use addition by non-opaque constant:
  //   (x + C) - y  ->  (x - y) + C
  if (!reassociationCanBreakAddressingModePattern(ISD::SUB, DL, N, N0, N1) &&
      N0.getOpcode() == ISD::ADD && N0.hasOneUse() &&
      isConstantOrConstantVector(N0.getOperand(1), /*NoOpaques=*/true)) {
    SDValue Sub = DAG.getNode(ISD::SUB, DL, VT, N0.getOperand(0), N1);
    return DAG.getNode(ISD::ADD, DL, VT, Sub, N0.getOperand(1));
  }
  // y - (x + C)  ->  (y - x) - C
  if (N1.getOpcode() == ISD::ADD && N1.hasOneUse() &&
      isConstantOrConstantVector(N1.getOperand(1), /*NoOpaques=*/true)) {
    SDValue Sub = DAG.getNode(ISD::SUB, DL, VT, N0, N1.getOperand(0));
    return DAG.getNode(ISD::SUB, DL, VT, Sub, N1.getOperand(1));
  }
  // (x - C) - y  ->  (x - y) - C
  // This is necessary because SUB(X,C) -> ADD(X,-C) doesn't work for vectors.
  if (N0.getOpcode() == ISD::SUB && N0.hasOneUse() &&
      isConstantOrConstantVector(N0.getOperand(1), /*NoOpaques=*/true)) {
    SDValue Sub = DAG.getNode(ISD::SUB, DL, VT, N0.getOperand(0), N1);
    return DAG.getNode(ISD::SUB, DL, VT, Sub, N0.getOperand(1));
  }
  // (C - x) - y  ->  C - (x + y)
  if (N0.getOpcode() == ISD::SUB && N0.hasOneUse() &&
      isConstantOrConstantVector(N0.getOperand(0), /*NoOpaques=*/true)) {
    SDValue Add = DAG.getNode(ISD::ADD, DL, VT, N0.getOperand(1), N1);
    return DAG.getNode(ISD::SUB, DL, VT, N0.getOperand(0), Add);
  }

  // If the target's bool is represented as 0/-1, prefer to make this 'add 0/-1'
  // rather than 'sub 0/1' (the sext should get folded).
  // sub X, (zext i1 Y) --> add X, (sext i1 Y)
  if (N1.getOpcode() == ISD::ZERO_EXTEND &&
      N1.getOperand(0).getScalarValueSizeInBits() == 1 &&
      TLI.getBooleanContents(VT) ==
          TargetLowering::ZeroOrNegativeOneBooleanContent) {
    SDValue SExt = DAG.getNode(ISD::SIGN_EXTEND, DL, VT, N1.getOperand(0));
    return DAG.getNode(ISD::ADD, DL, VT, N0, SExt);
  }

  // fold B = sra (A, size(A)-1); sub (xor (A, B), B) -> (abs A)
  if ((!LegalOperations || hasOperation(ISD::ABS, VT)) &&
      sd_match(N1, m_Sra(m_Value(A), m_SpecificInt(BitWidth - 1))) &&
      sd_match(N0, m_Xor(m_Specific(A), m_Specific(N1))))
    return DAG.getNode(ISD::ABS, DL, VT, A);

  // If the relocation model supports it, consider symbol offsets.
  if (GlobalAddressSDNode *GA = dyn_cast<GlobalAddressSDNode>(N0))
    if (!LegalOperations && TLI.isOffsetFoldingLegal(GA)) {
      // fold (sub Sym+c1, Sym+c2) -> c1-c2
      if (GlobalAddressSDNode *GB = dyn_cast<GlobalAddressSDNode>(N1))
        if (GA->getGlobal() == GB->getGlobal())
          return DAG.getConstant((uint64_t)GA->getOffset() - GB->getOffset(),
                                 DL, VT);
    }

  // sub X, (sextinreg Y i1) -> add X, (and Y 1)
  if (N1.getOpcode() == ISD::SIGN_EXTEND_INREG) {
    VTSDNode *TN = cast<VTSDNode>(N1.getOperand(1));
    if (TN->getVT() == MVT::i1) {
      SDValue ZExt = DAG.getNode(ISD::AND, DL, VT, N1.getOperand(0),
                                 DAG.getConstant(1, DL, VT));
      return DAG.getNode(ISD::ADD, DL, VT, N0, ZExt);
    }
  }

  // canonicalize (sub X, (vscale * C)) to (add X, (vscale * -C))
  if (N1.getOpcode() == ISD::VSCALE && N1.hasOneUse()) {
    const APInt &IntVal = N1.getConstantOperandAPInt(0);
    return DAG.getNode(ISD::ADD, DL, VT, N0, DAG.getVScale(DL, VT, -IntVal));
  }

  // canonicalize (sub X, step_vector(C)) to (add X, step_vector(-C))
  if (N1.getOpcode() == ISD::STEP_VECTOR && N1.hasOneUse()) {
    APInt NewStep = -N1.getConstantOperandAPInt(0);
    return DAG.getNode(ISD::ADD, DL, VT, N0,
                       DAG.getStepVector(DL, VT, NewStep));
  }

  // Prefer an add for more folding potential and possibly better codegen:
  // sub N0, (lshr N10, width-1) --> add N0, (ashr N10, width-1)
  if (!LegalOperations && N1.getOpcode() == ISD::SRL && N1.hasOneUse()) {
    SDValue ShAmt = N1.getOperand(1);
    ConstantSDNode *ShAmtC = isConstOrConstSplat(ShAmt);
    if (ShAmtC && ShAmtC->getAPIntValue() == (BitWidth - 1)) {
      SDValue SRA = DAG.getNode(ISD::SRA, DL, VT, N1.getOperand(0), ShAmt);
      return DAG.getNode(ISD::ADD, DL, VT, N0, SRA);
    }
  }

  // As with the previous fold, prefer add for more folding potential.
  // Subtracting SMIN/0 is the same as adding SMIN/0:
  // N0 - (X << BW-1) --> N0 + (X << BW-1)
  if (N1.getOpcode() == ISD::SHL) {
    ConstantSDNode *ShlC = isConstOrConstSplat(N1.getOperand(1));
    if (ShlC && ShlC->getAPIntValue() == (BitWidth - 1))
      return DAG.getNode(ISD::ADD, DL, VT, N1, N0);
  }

  // (sub (usubo_carry X, 0, Carry), Y) -> (usubo_carry X, Y, Carry)
  if (N0.getOpcode() == ISD::USUBO_CARRY && isNullConstant(N0.getOperand(1)) &&
      N0.getResNo() == 0 && N0.hasOneUse())
    return DAG.getNode(ISD::USUBO_CARRY, DL, N0->getVTList(),
                       N0.getOperand(0), N1, N0.getOperand(2));

  if (TLI.isOperationLegalOrCustom(ISD::UADDO_CARRY, VT)) {
    // (sub Carry, X)  ->  (uaddo_carry (sub 0, X), 0, Carry)
    if (SDValue Carry = getAsCarry(TLI, N0)) {
      SDValue X = N1;
      SDValue Zero = DAG.getConstant(0, DL, VT);
      SDValue NegX = DAG.getNode(ISD::SUB, DL, VT, Zero, X);
      return DAG.getNode(ISD::UADDO_CARRY, DL,
                         DAG.getVTList(VT, Carry.getValueType()), NegX, Zero,
                         Carry);
    }
  }

  // If there's no chance of borrowing from adjacent bits, then sub is xor:
  // sub C0, X --> xor X, C0
  if (ConstantSDNode *C0 = isConstOrConstSplat(N0)) {
    if (!C0->isOpaque()) {
      const APInt &C0Val = C0->getAPIntValue();
      const APInt &MaybeOnes = ~DAG.computeKnownBits(N1).Zero;
      if ((C0Val - MaybeOnes) == (C0Val ^ MaybeOnes))
        return DAG.getNode(ISD::XOR, DL, VT, N1, N0);
    }
  }

  // smax(a,b) - smin(a,b) --> abds(a,b)
  if ((!LegalOperations || hasOperation(ISD::ABDS, VT)) &&
      sd_match(N0, m_SMaxLike(m_Value(A), m_Value(B))) &&
      sd_match(N1, m_SMinLike(m_Specific(A), m_Specific(B))))
    return DAG.getNode(ISD::ABDS, DL, VT, A, B);

  // smin(a,b) - smax(a,b) --> neg(abds(a,b))
  if (hasOperation(ISD::ABDS, VT) &&
      sd_match(N0, m_SMinLike(m_Value(A), m_Value(B))) &&
      sd_match(N1, m_SMaxLike(m_Specific(A), m_Specific(B))))
    return DAG.getNegative(DAG.getNode(ISD::ABDS, DL, VT, A, B), DL, VT);

  // umax(a,b) - umin(a,b) --> abdu(a,b)
  if ((!LegalOperations || hasOperation(ISD::ABDU, VT)) &&
      sd_match(N0, m_UMaxLike(m_Value(A), m_Value(B))) &&
      sd_match(N1, m_UMinLike(m_Specific(A), m_Specific(B))))
    return DAG.getNode(ISD::ABDU, DL, VT, A, B);

  // umin(a,b) - umax(a,b) --> neg(abdu(a,b))
  if (hasOperation(ISD::ABDU, VT) &&
      sd_match(N0, m_UMinLike(m_Value(A), m_Value(B))) &&
      sd_match(N1, m_UMaxLike(m_Specific(A), m_Specific(B))))
    return DAG.getNegative(DAG.getNode(ISD::ABDU, DL, VT, A, B), DL, VT);

  return SDValue();
}

SDValue DAGCombiner::visitSUBSAT(SDNode *N) {
  unsigned Opcode = N->getOpcode();
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N0.getValueType();
  bool IsSigned = Opcode == ISD::SSUBSAT;
  SDLoc DL(N);

  // fold (sub_sat x, undef) -> 0
  if (N0.isUndef() || N1.isUndef())
    return DAG.getConstant(0, DL, VT);

  // fold (sub_sat x, x) -> 0
  if (N0 == N1)
    return DAG.getConstant(0, DL, VT);

  // fold (sub_sat c1, c2) -> c3
  if (SDValue C = DAG.FoldConstantArithmetic(Opcode, DL, VT, {N0, N1}))
    return C;

  // fold vector ops
  if (VT.isVector()) {
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

    // fold (sub_sat x, 0) -> x, vector edition
    if (ISD::isConstantSplatVectorAllZeros(N1.getNode()))
      return N0;
  }

  // fold (sub_sat x, 0) -> x
  if (isNullConstant(N1))
    return N0;

  // If it cannot overflow, transform into an sub.
  if (DAG.willNotOverflowSub(IsSigned, N0, N1))
    return DAG.getNode(ISD::SUB, DL, VT, N0, N1);

  return SDValue();
}

SDValue DAGCombiner::visitSUBC(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N0.getValueType();
  SDLoc DL(N);

  // If the flag result is dead, turn this into an SUB.
  if (!N->hasAnyUseOfValue(1))
    return CombineTo(N, DAG.getNode(ISD::SUB, DL, VT, N0, N1),
                     DAG.getNode(ISD::CARRY_FALSE, DL, MVT::Glue));

  // fold (subc x, x) -> 0 + no borrow
  if (N0 == N1)
    return CombineTo(N, DAG.getConstant(0, DL, VT),
                     DAG.getNode(ISD::CARRY_FALSE, DL, MVT::Glue));

  // fold (subc x, 0) -> x + no borrow
  if (isNullConstant(N1))
    return CombineTo(N, N0, DAG.getNode(ISD::CARRY_FALSE, DL, MVT::Glue));

  // Canonicalize (sub -1, x) -> ~x, i.e. (xor x, -1) + no borrow
  if (isAllOnesConstant(N0))
    return CombineTo(N, DAG.getNode(ISD::XOR, DL, VT, N1, N0),
                     DAG.getNode(ISD::CARRY_FALSE, DL, MVT::Glue));

  return SDValue();
}

SDValue DAGCombiner::visitSUBO(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N0.getValueType();
  bool IsSigned = (ISD::SSUBO == N->getOpcode());

  EVT CarryVT = N->getValueType(1);
  SDLoc DL(N);

  // If the flag result is dead, turn this into an SUB.
  if (!N->hasAnyUseOfValue(1))
    return CombineTo(N, DAG.getNode(ISD::SUB, DL, VT, N0, N1),
                     DAG.getUNDEF(CarryVT));

  // fold (subo x, x) -> 0 + no borrow
  if (N0 == N1)
    return CombineTo(N, DAG.getConstant(0, DL, VT),
                     DAG.getConstant(0, DL, CarryVT));

  // fold (subox, c) -> (addo x, -c)
  if (ConstantSDNode *N1C = getAsNonOpaqueConstant(N1))
    if (IsSigned && !N1C->isMinSignedValue())
      return DAG.getNode(ISD::SADDO, DL, N->getVTList(), N0,
                         DAG.getConstant(-N1C->getAPIntValue(), DL, VT));

  // fold (subo x, 0) -> x + no borrow
  if (isNullOrNullSplat(N1))
    return CombineTo(N, N0, DAG.getConstant(0, DL, CarryVT));

  // If it cannot overflow, transform into an sub.
  if (DAG.willNotOverflowSub(IsSigned, N0, N1))
    return CombineTo(N, DAG.getNode(ISD::SUB, DL, VT, N0, N1),
                     DAG.getConstant(0, DL, CarryVT));

  // Canonicalize (usubo -1, x) -> ~x, i.e. (xor x, -1) + no borrow
  if (!IsSigned && isAllOnesOrAllOnesSplat(N0))
    return CombineTo(N, DAG.getNode(ISD::XOR, DL, VT, N1, N0),
                     DAG.getConstant(0, DL, CarryVT));

  return SDValue();
}

SDValue DAGCombiner::visitSUBE(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue CarryIn = N->getOperand(2);

  // fold (sube x, y, false) -> (subc x, y)
  if (CarryIn.getOpcode() == ISD::CARRY_FALSE)
    return DAG.getNode(ISD::SUBC, SDLoc(N), N->getVTList(), N0, N1);

  return SDValue();
}

SDValue DAGCombiner::visitUSUBO_CARRY(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue CarryIn = N->getOperand(2);

  // fold (usubo_carry x, y, false) -> (usubo x, y)
  if (isNullConstant(CarryIn)) {
    if (!LegalOperations ||
        TLI.isOperationLegalOrCustom(ISD::USUBO, N->getValueType(0)))
      return DAG.getNode(ISD::USUBO, SDLoc(N), N->getVTList(), N0, N1);
  }

  return SDValue();
}

SDValue DAGCombiner::visitSSUBO_CARRY(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue CarryIn = N->getOperand(2);

  // fold (ssubo_carry x, y, false) -> (ssubo x, y)
  if (isNullConstant(CarryIn)) {
    if (!LegalOperations ||
        TLI.isOperationLegalOrCustom(ISD::SSUBO, N->getValueType(0)))
      return DAG.getNode(ISD::SSUBO, SDLoc(N), N->getVTList(), N0, N1);
  }

  return SDValue();
}

// Notice that "mulfix" can be any of SMULFIX, SMULFIXSAT, UMULFIX and
// UMULFIXSAT here.
SDValue DAGCombiner::visitMULFIX(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue Scale = N->getOperand(2);
  EVT VT = N0.getValueType();

  // fold (mulfix x, undef, scale) -> 0
  if (N0.isUndef() || N1.isUndef())
    return DAG.getConstant(0, SDLoc(N), VT);

  // Canonicalize constant to RHS (vector doesn't have to splat)
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
     !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return DAG.getNode(N->getOpcode(), SDLoc(N), VT, N1, N0, Scale);

  // fold (mulfix x, 0, scale) -> 0
  if (isNullConstant(N1))
    return DAG.getConstant(0, SDLoc(N), VT);

  return SDValue();
}

template <class MatchContextClass> SDValue DAGCombiner::visitMUL(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N0.getValueType();
  unsigned BitWidth = VT.getScalarSizeInBits();
  SDLoc DL(N);
  bool UseVP = std::is_same_v<MatchContextClass, VPMatchContext>;
  MatchContextClass Matcher(DAG, TLI, N);

  // fold (mul x, undef) -> 0
  if (N0.isUndef() || N1.isUndef())
    return DAG.getConstant(0, DL, VT);

  // fold (mul c1, c2) -> c1*c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::MUL, DL, VT, {N0, N1}))
    return C;

  // canonicalize constant to RHS (vector doesn't have to splat)
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
      !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return Matcher.getNode(ISD::MUL, DL, VT, N1, N0);

  bool N1IsConst = false;
  bool N1IsOpaqueConst = false;
  APInt ConstValue1;

  // fold vector ops
  if (VT.isVector()) {
    // TODO: Change this to use SimplifyVBinOp when it supports VP op.
    if (!UseVP)
      if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
        return FoldedVOp;

    N1IsConst = ISD::isConstantSplatVector(N1.getNode(), ConstValue1);
    assert((!N1IsConst || ConstValue1.getBitWidth() == BitWidth) &&
           "Splat APInt should be element width");
  } else {
    N1IsConst = isa<ConstantSDNode>(N1);
    if (N1IsConst) {
      ConstValue1 = N1->getAsAPIntVal();
      N1IsOpaqueConst = cast<ConstantSDNode>(N1)->isOpaque();
    }
  }

  // fold (mul x, 0) -> 0
  if (N1IsConst && ConstValue1.isZero())
    return N1;

  // fold (mul x, 1) -> x
  if (N1IsConst && ConstValue1.isOne())
    return N0;

  if (!UseVP)
    if (SDValue NewSel = foldBinOpIntoSelect(N))
      return NewSel;

  // fold (mul x, -1) -> 0-x
  if (N1IsConst && ConstValue1.isAllOnes())
    return Matcher.getNode(ISD::SUB, DL, VT, DAG.getConstant(0, DL, VT), N0);

  // fold (mul x, (1 << c)) -> x << c
  if (isConstantOrConstantVector(N1, /*NoOpaques*/ true) &&
      (!VT.isVector() || Level <= AfterLegalizeVectorOps)) {
    if (SDValue LogBase2 = BuildLogBase2(N1, DL)) {
      EVT ShiftVT = getShiftAmountTy(N0.getValueType());
      SDValue Trunc = DAG.getZExtOrTrunc(LogBase2, DL, ShiftVT);
      return Matcher.getNode(ISD::SHL, DL, VT, N0, Trunc);
    }
  }

  // fold (mul x, -(1 << c)) -> -(x << c) or (-x) << c
  if (N1IsConst && !N1IsOpaqueConst && ConstValue1.isNegatedPowerOf2()) {
    unsigned Log2Val = (-ConstValue1).logBase2();

    // FIXME: If the input is something that is easily negated (e.g. a
    // single-use add), we should put the negate there.
    return Matcher.getNode(
        ISD::SUB, DL, VT, DAG.getConstant(0, DL, VT),
        Matcher.getNode(ISD::SHL, DL, VT, N0,
                        DAG.getShiftAmountConstant(Log2Val, VT, DL)));
  }

  // Attempt to reuse an existing umul_lohi/smul_lohi node, but only if the
  // hi result is in use in case we hit this mid-legalization.
  if (!UseVP) {
    for (unsigned LoHiOpc : {ISD::UMUL_LOHI, ISD::SMUL_LOHI}) {
      if (!LegalOperations || TLI.isOperationLegalOrCustom(LoHiOpc, VT)) {
        SDVTList LoHiVT = DAG.getVTList(VT, VT);
        // TODO: Can we match commutable operands with getNodeIfExists?
        if (SDNode *LoHi = DAG.getNodeIfExists(LoHiOpc, LoHiVT, {N0, N1}))
          if (LoHi->hasAnyUseOfValue(1))
            return SDValue(LoHi, 0);
        if (SDNode *LoHi = DAG.getNodeIfExists(LoHiOpc, LoHiVT, {N1, N0}))
          if (LoHi->hasAnyUseOfValue(1))
            return SDValue(LoHi, 0);
      }
    }
  }

  // Try to transform:
  // (1) multiply-by-(power-of-2 +/- 1) into shift and add/sub.
  // mul x, (2^N + 1) --> add (shl x, N), x
  // mul x, (2^N - 1) --> sub (shl x, N), x
  // Examples: x * 33 --> (x << 5) + x
  //           x * 15 --> (x << 4) - x
  //           x * -33 --> -((x << 5) + x)
  //           x * -15 --> -((x << 4) - x) ; this reduces --> x - (x << 4)
  // (2) multiply-by-(power-of-2 +/- power-of-2) into shifts and add/sub.
  // mul x, (2^N + 2^M) --> (add (shl x, N), (shl x, M))
  // mul x, (2^N - 2^M) --> (sub (shl x, N), (shl x, M))
  // Examples: x * 0x8800 --> (x << 15) + (x << 11)
  //           x * 0xf800 --> (x << 16) - (x << 11)
  //           x * -0x8800 --> -((x << 15) + (x << 11))
  //           x * -0xf800 --> -((x << 16) - (x << 11)) ; (x << 11) - (x << 16)
  if (!UseVP && N1IsConst &&
      TLI.decomposeMulByConstant(*DAG.getContext(), VT, N1)) {
    // TODO: We could handle more general decomposition of any constant by
    //       having the target set a limit on number of ops and making a
    //       callback to determine that sequence (similar to sqrt expansion).
    unsigned MathOp = ISD::DELETED_NODE;
    APInt MulC = ConstValue1.abs();
    // The constant `2` should be treated as (2^0 + 1).
    unsigned TZeros = MulC == 2 ? 0 : MulC.countr_zero();
    MulC.lshrInPlace(TZeros);
    if ((MulC - 1).isPowerOf2())
      MathOp = ISD::ADD;
    else if ((MulC + 1).isPowerOf2())
      MathOp = ISD::SUB;

    if (MathOp != ISD::DELETED_NODE) {
      unsigned ShAmt =
          MathOp == ISD::ADD ? (MulC - 1).logBase2() : (MulC + 1).logBase2();
      ShAmt += TZeros;
      assert(ShAmt < BitWidth &&
             "multiply-by-constant generated out of bounds shift");
      SDValue Shl =
          DAG.getNode(ISD::SHL, DL, VT, N0, DAG.getConstant(ShAmt, DL, VT));
      SDValue R =
          TZeros ? DAG.getNode(MathOp, DL, VT, Shl,
                               DAG.getNode(ISD::SHL, DL, VT, N0,
                                           DAG.getConstant(TZeros, DL, VT)))
                 : DAG.getNode(MathOp, DL, VT, Shl, N0);
      if (ConstValue1.isNegative())
        R = DAG.getNegative(R, DL, VT);
      return R;
    }
  }

  // (mul (shl X, c1), c2) -> (mul X, c2 << c1)
  if (sd_context_match(N0, Matcher, m_Opc(ISD::SHL))) {
    SDValue N01 = N0.getOperand(1);
    if (SDValue C3 = DAG.FoldConstantArithmetic(ISD::SHL, DL, VT, {N1, N01}))
      return DAG.getNode(ISD::MUL, DL, VT, N0.getOperand(0), C3);
  }

  // Change (mul (shl X, C), Y) -> (shl (mul X, Y), C) when the shift has one
  // use.
  {
    SDValue Sh, Y;

    // Check for both (mul (shl X, C), Y)  and  (mul Y, (shl X, C)).
    if (sd_context_match(N0, Matcher, m_OneUse(m_Opc(ISD::SHL))) &&
        isConstantOrConstantVector(N0.getOperand(1))) {
      Sh = N0; Y = N1;
    } else if (sd_context_match(N1, Matcher, m_OneUse(m_Opc(ISD::SHL))) &&
               isConstantOrConstantVector(N1.getOperand(1))) {
      Sh = N1; Y = N0;
    }

    if (Sh.getNode()) {
      SDValue Mul = Matcher.getNode(ISD::MUL, DL, VT, Sh.getOperand(0), Y);
      return Matcher.getNode(ISD::SHL, DL, VT, Mul, Sh.getOperand(1));
    }
  }

  // fold (mul (add x, c1), c2) -> (add (mul x, c2), c1*c2)
  if (sd_context_match(N0, Matcher, m_Opc(ISD::ADD)) &&
      DAG.isConstantIntBuildVectorOrConstantInt(N1) &&
      DAG.isConstantIntBuildVectorOrConstantInt(N0.getOperand(1)) &&
      isMulAddWithConstProfitable(N, N0, N1))
    return Matcher.getNode(
        ISD::ADD, DL, VT,
        Matcher.getNode(ISD::MUL, SDLoc(N0), VT, N0.getOperand(0), N1),
        Matcher.getNode(ISD::MUL, SDLoc(N1), VT, N0.getOperand(1), N1));

  // Fold (mul (vscale * C0), C1) to (vscale * (C0 * C1)).
  ConstantSDNode *NC1 = isConstOrConstSplat(N1);
  if (!UseVP && N0.getOpcode() == ISD::VSCALE && NC1) {
    const APInt &C0 = N0.getConstantOperandAPInt(0);
    const APInt &C1 = NC1->getAPIntValue();
    return DAG.getVScale(DL, VT, C0 * C1);
  }

  // Fold (mul step_vector(C0), C1) to (step_vector(C0 * C1)).
  APInt MulVal;
  if (!UseVP && N0.getOpcode() == ISD::STEP_VECTOR &&
      ISD::isConstantSplatVector(N1.getNode(), MulVal)) {
    const APInt &C0 = N0.getConstantOperandAPInt(0);
    APInt NewStep = C0 * MulVal;
    return DAG.getStepVector(DL, VT, NewStep);
  }

  // Fold Y = sra (X, size(X)-1); mul (or (Y, 1), X) -> (abs X)
  SDValue X;
  if (!UseVP && (!LegalOperations || hasOperation(ISD::ABS, VT)) &&
      sd_context_match(
          N, Matcher,
          m_Mul(m_Or(m_Sra(m_Value(X), m_SpecificInt(BitWidth - 1)), m_One()),
                m_Deferred(X)))) {
    return Matcher.getNode(ISD::ABS, DL, VT, X);
  }

  // Fold ((mul x, 0/undef) -> 0,
  //       (mul x, 1) -> x) -> x)
  // -> and(x, mask)
  // We can replace vectors with '0' and '1' factors with a clearing mask.
  if (VT.isFixedLengthVector()) {
    unsigned NumElts = VT.getVectorNumElements();
    SmallBitVector ClearMask;
    ClearMask.reserve(NumElts);
    auto IsClearMask = [&ClearMask](ConstantSDNode *V) {
      if (!V || V->isZero()) {
        ClearMask.push_back(true);
        return true;
      }
      ClearMask.push_back(false);
      return V->isOne();
    };
    if ((!LegalOperations || TLI.isOperationLegalOrCustom(ISD::AND, VT)) &&
        ISD::matchUnaryPredicate(N1, IsClearMask, /*AllowUndefs*/ true)) {
      assert(N1.getOpcode() == ISD::BUILD_VECTOR && "Unknown constant vector");
      EVT LegalSVT = N1.getOperand(0).getValueType();
      SDValue Zero = DAG.getConstant(0, DL, LegalSVT);
      SDValue AllOnes = DAG.getAllOnesConstant(DL, LegalSVT);
      SmallVector<SDValue, 16> Mask(NumElts, AllOnes);
      for (unsigned I = 0; I != NumElts; ++I)
        if (ClearMask[I])
          Mask[I] = Zero;
      return DAG.getNode(ISD::AND, DL, VT, N0, DAG.getBuildVector(VT, DL, Mask));
    }
  }

  // reassociate mul
  // TODO: Change reassociateOps to support vp ops.
  if (!UseVP)
    if (SDValue RMUL = reassociateOps(ISD::MUL, DL, N0, N1, N->getFlags()))
      return RMUL;

  // Fold mul(vecreduce(x), vecreduce(y)) -> vecreduce(mul(x, y))
  // TODO: Change reassociateReduction to support vp ops.
  if (!UseVP)
    if (SDValue SD =
            reassociateReduction(ISD::VECREDUCE_MUL, ISD::MUL, DL, VT, N0, N1))
      return SD;

  // Simplify the operands using demanded-bits information.
  if (SimplifyDemandedBits(SDValue(N, 0)))
    return SDValue(N, 0);

  return SDValue();
}

/// Return true if divmod libcall is available.
static bool isDivRemLibcallAvailable(SDNode *Node, bool isSigned,
                                     const TargetLowering &TLI) {
  RTLIB::Libcall LC;
  EVT NodeType = Node->getValueType(0);
  if (!NodeType.isSimple())
    return false;
  switch (NodeType.getSimpleVT().SimpleTy) {
  default: return false; // No libcall for vector types.
  case MVT::i8:   LC= isSigned ? RTLIB::SDIVREM_I8  : RTLIB::UDIVREM_I8;  break;
  case MVT::i16:  LC= isSigned ? RTLIB::SDIVREM_I16 : RTLIB::UDIVREM_I16; break;
  case MVT::i32:  LC= isSigned ? RTLIB::SDIVREM_I32 : RTLIB::UDIVREM_I32; break;
  case MVT::i64:  LC= isSigned ? RTLIB::SDIVREM_I64 : RTLIB::UDIVREM_I64; break;
  case MVT::i128: LC= isSigned ? RTLIB::SDIVREM_I128:RTLIB::UDIVREM_I128; break;
  }

  return TLI.getLibcallName(LC) != nullptr;
}

/// Issue divrem if both quotient and remainder are needed.
SDValue DAGCombiner::useDivRem(SDNode *Node) {
  if (Node->use_empty())
    return SDValue(); // This is a dead node, leave it alone.

  unsigned Opcode = Node->getOpcode();
  bool isSigned = (Opcode == ISD::SDIV) || (Opcode == ISD::SREM);
  unsigned DivRemOpc = isSigned ? ISD::SDIVREM : ISD::UDIVREM;

  // DivMod lib calls can still work on non-legal types if using lib-calls.
  EVT VT = Node->getValueType(0);
  if (VT.isVector() || !VT.isInteger())
    return SDValue();

  if (!TLI.isTypeLegal(VT) && !TLI.isOperationCustom(DivRemOpc, VT))
    return SDValue();

  // If DIVREM is going to get expanded into a libcall,
  // but there is no libcall available, then don't combine.
  if (!TLI.isOperationLegalOrCustom(DivRemOpc, VT) &&
      !isDivRemLibcallAvailable(Node, isSigned, TLI))
    return SDValue();

  // If div is legal, it's better to do the normal expansion
  unsigned OtherOpcode = 0;
  if ((Opcode == ISD::SDIV) || (Opcode == ISD::UDIV)) {
    OtherOpcode = isSigned ? ISD::SREM : ISD::UREM;
    if (TLI.isOperationLegalOrCustom(Opcode, VT))
      return SDValue();
  } else {
    OtherOpcode = isSigned ? ISD::SDIV : ISD::UDIV;
    if (TLI.isOperationLegalOrCustom(OtherOpcode, VT))
      return SDValue();
  }

  SDValue Op0 = Node->getOperand(0);
  SDValue Op1 = Node->getOperand(1);
  SDValue combined;
  for (SDNode *User : Op0->uses()) {
    if (User == Node || User->getOpcode() == ISD::DELETED_NODE ||
        User->use_empty())
      continue;
    // Convert the other matching node(s), too;
    // otherwise, the DIVREM may get target-legalized into something
    // target-specific that we won't be able to recognize.
    unsigned UserOpc = User->getOpcode();
    if ((UserOpc == Opcode || UserOpc == OtherOpcode || UserOpc == DivRemOpc) &&
        User->getOperand(0) == Op0 &&
        User->getOperand(1) == Op1) {
      if (!combined) {
        if (UserOpc == OtherOpcode) {
          SDVTList VTs = DAG.getVTList(VT, VT);
          combined = DAG.getNode(DivRemOpc, SDLoc(Node), VTs, Op0, Op1);
        } else if (UserOpc == DivRemOpc) {
          combined = SDValue(User, 0);
        } else {
          assert(UserOpc == Opcode);
          continue;
        }
      }
      if (UserOpc == ISD::SDIV || UserOpc == ISD::UDIV)
        CombineTo(User, combined);
      else if (UserOpc == ISD::SREM || UserOpc == ISD::UREM)
        CombineTo(User, combined.getValue(1));
    }
  }
  return combined;
}

static SDValue simplifyDivRem(SDNode *N, SelectionDAG &DAG) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  unsigned Opc = N->getOpcode();
  bool IsDiv = (ISD::SDIV == Opc) || (ISD::UDIV == Opc);
  ConstantSDNode *N1C = isConstOrConstSplat(N1);

  // X / undef -> undef
  // X % undef -> undef
  // X / 0 -> undef
  // X % 0 -> undef
  // NOTE: This includes vectors where any divisor element is zero/undef.
  if (DAG.isUndef(Opc, {N0, N1}))
    return DAG.getUNDEF(VT);

  // undef / X -> 0
  // undef % X -> 0
  if (N0.isUndef())
    return DAG.getConstant(0, DL, VT);

  // 0 / X -> 0
  // 0 % X -> 0
  ConstantSDNode *N0C = isConstOrConstSplat(N0);
  if (N0C && N0C->isZero())
    return N0;

  // X / X -> 1
  // X % X -> 0
  if (N0 == N1)
    return DAG.getConstant(IsDiv ? 1 : 0, DL, VT);

  // X / 1 -> X
  // X % 1 -> 0
  // If this is a boolean op (single-bit element type), we can't have
  // division-by-zero or remainder-by-zero, so assume the divisor is 1.
  // TODO: Similarly, if we're zero-extending a boolean divisor, then assume
  // it's a 1.
  if ((N1C && N1C->isOne()) || (VT.getScalarType() == MVT::i1))
    return IsDiv ? N0 : DAG.getConstant(0, DL, VT);

  return SDValue();
}

SDValue DAGCombiner::visitSDIV(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  EVT CCVT = getSetCCResultType(VT);
  SDLoc DL(N);

  // fold (sdiv c1, c2) -> c1/c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::SDIV, DL, VT, {N0, N1}))
    return C;

  // fold vector ops
  if (VT.isVector())
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

  // fold (sdiv X, -1) -> 0-X
  ConstantSDNode *N1C = isConstOrConstSplat(N1);
  if (N1C && N1C->isAllOnes())
    return DAG.getNegative(N0, DL, VT);

  // fold (sdiv X, MIN_SIGNED) -> select(X == MIN_SIGNED, 1, 0)
  if (N1C && N1C->isMinSignedValue())
    return DAG.getSelect(DL, VT, DAG.getSetCC(DL, CCVT, N0, N1, ISD::SETEQ),
                         DAG.getConstant(1, DL, VT),
                         DAG.getConstant(0, DL, VT));

  if (SDValue V = simplifyDivRem(N, DAG))
    return V;

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  // If we know the sign bits of both operands are zero, strength reduce to a
  // udiv instead.  Handles (X&15) /s 4 -> X&15 >> 2
  if (DAG.SignBitIsZero(N1) && DAG.SignBitIsZero(N0))
    return DAG.getNode(ISD::UDIV, DL, N1.getValueType(), N0, N1);

  if (SDValue V = visitSDIVLike(N0, N1, N)) {
    // If the corresponding remainder node exists, update its users with
    // (Dividend - (Quotient * Divisor).
    if (SDNode *RemNode = DAG.getNodeIfExists(ISD::SREM, N->getVTList(),
                                              { N0, N1 })) {
      SDValue Mul = DAG.getNode(ISD::MUL, DL, VT, V, N1);
      SDValue Sub = DAG.getNode(ISD::SUB, DL, VT, N0, Mul);
      AddToWorklist(Mul.getNode());
      AddToWorklist(Sub.getNode());
      CombineTo(RemNode, Sub);
    }
    return V;
  }

  // sdiv, srem -> sdivrem
  // If the divisor is constant, then return DIVREM only if isIntDivCheap() is
  // true.  Otherwise, we break the simplification logic in visitREM().
  AttributeList Attr = DAG.getMachineFunction().getFunction().getAttributes();
  if (!N1C || TLI.isIntDivCheap(N->getValueType(0), Attr))
    if (SDValue DivRem = useDivRem(N))
        return DivRem;

  return SDValue();
}

static bool isDivisorPowerOfTwo(SDValue Divisor) {
  // Helper for determining whether a value is a power-2 constant scalar or a
  // vector of such elements.
  auto IsPowerOfTwo = [](ConstantSDNode *C) {
    if (C->isZero() || C->isOpaque())
      return false;
    if (C->getAPIntValue().isPowerOf2())
      return true;
    if (C->getAPIntValue().isNegatedPowerOf2())
      return true;
    return false;
  };

  return ISD::matchUnaryPredicate(Divisor, IsPowerOfTwo);
}

SDValue DAGCombiner::visitSDIVLike(SDValue N0, SDValue N1, SDNode *N) {
  SDLoc DL(N);
  EVT VT = N->getValueType(0);
  EVT CCVT = getSetCCResultType(VT);
  unsigned BitWidth = VT.getScalarSizeInBits();

  // fold (sdiv X, pow2) -> simple ops after legalize
  // FIXME: We check for the exact bit here because the generic lowering gives
  // better results in that case. The target-specific lowering should learn how
  // to handle exact sdivs efficiently.
  if (!N->getFlags().hasExact() && isDivisorPowerOfTwo(N1)) {
    // Target-specific implementation of sdiv x, pow2.
    if (SDValue Res = BuildSDIVPow2(N))
      return Res;

    // Create constants that are functions of the shift amount value.
    EVT ShiftAmtTy = getShiftAmountTy(N0.getValueType());
    SDValue Bits = DAG.getConstant(BitWidth, DL, ShiftAmtTy);
    SDValue C1 = DAG.getNode(ISD::CTTZ, DL, VT, N1);
    C1 = DAG.getZExtOrTrunc(C1, DL, ShiftAmtTy);
    SDValue Inexact = DAG.getNode(ISD::SUB, DL, ShiftAmtTy, Bits, C1);
    if (!isConstantOrConstantVector(Inexact))
      return SDValue();

    // Splat the sign bit into the register
    SDValue Sign = DAG.getNode(ISD::SRA, DL, VT, N0,
                               DAG.getConstant(BitWidth - 1, DL, ShiftAmtTy));
    AddToWorklist(Sign.getNode());

    // Add (N0 < 0) ? abs2 - 1 : 0;
    SDValue Srl = DAG.getNode(ISD::SRL, DL, VT, Sign, Inexact);
    AddToWorklist(Srl.getNode());
    SDValue Add = DAG.getNode(ISD::ADD, DL, VT, N0, Srl);
    AddToWorklist(Add.getNode());
    SDValue Sra = DAG.getNode(ISD::SRA, DL, VT, Add, C1);
    AddToWorklist(Sra.getNode());

    // Special case: (sdiv X, 1) -> X
    // Special Case: (sdiv X, -1) -> 0-X
    SDValue One = DAG.getConstant(1, DL, VT);
    SDValue AllOnes = DAG.getAllOnesConstant(DL, VT);
    SDValue IsOne = DAG.getSetCC(DL, CCVT, N1, One, ISD::SETEQ);
    SDValue IsAllOnes = DAG.getSetCC(DL, CCVT, N1, AllOnes, ISD::SETEQ);
    SDValue IsOneOrAllOnes = DAG.getNode(ISD::OR, DL, CCVT, IsOne, IsAllOnes);
    Sra = DAG.getSelect(DL, VT, IsOneOrAllOnes, N0, Sra);

    // If dividing by a positive value, we're done. Otherwise, the result must
    // be negated.
    SDValue Zero = DAG.getConstant(0, DL, VT);
    SDValue Sub = DAG.getNode(ISD::SUB, DL, VT, Zero, Sra);

    // FIXME: Use SELECT_CC once we improve SELECT_CC constant-folding.
    SDValue IsNeg = DAG.getSetCC(DL, CCVT, N1, Zero, ISD::SETLT);
    SDValue Res = DAG.getSelect(DL, VT, IsNeg, Sub, Sra);
    return Res;
  }

  // If integer divide is expensive and we satisfy the requirements, emit an
  // alternate sequence.  Targets may check function attributes for size/speed
  // trade-offs.
  AttributeList Attr = DAG.getMachineFunction().getFunction().getAttributes();
  if (isConstantOrConstantVector(N1) &&
      !TLI.isIntDivCheap(N->getValueType(0), Attr))
    if (SDValue Op = BuildSDIV(N))
      return Op;

  return SDValue();
}

SDValue DAGCombiner::visitUDIV(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  EVT CCVT = getSetCCResultType(VT);
  SDLoc DL(N);

  // fold (udiv c1, c2) -> c1/c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::UDIV, DL, VT, {N0, N1}))
    return C;

  // fold vector ops
  if (VT.isVector())
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

  // fold (udiv X, -1) -> select(X == -1, 1, 0)
  ConstantSDNode *N1C = isConstOrConstSplat(N1);
  if (N1C && N1C->isAllOnes() && CCVT.isVector() == VT.isVector()) {
    return DAG.getSelect(DL, VT, DAG.getSetCC(DL, CCVT, N0, N1, ISD::SETEQ),
                         DAG.getConstant(1, DL, VT),
                         DAG.getConstant(0, DL, VT));
  }

  if (SDValue V = simplifyDivRem(N, DAG))
    return V;

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  if (SDValue V = visitUDIVLike(N0, N1, N)) {
    // If the corresponding remainder node exists, update its users with
    // (Dividend - (Quotient * Divisor).
    if (SDNode *RemNode = DAG.getNodeIfExists(ISD::UREM, N->getVTList(),
                                              { N0, N1 })) {
      SDValue Mul = DAG.getNode(ISD::MUL, DL, VT, V, N1);
      SDValue Sub = DAG.getNode(ISD::SUB, DL, VT, N0, Mul);
      AddToWorklist(Mul.getNode());
      AddToWorklist(Sub.getNode());
      CombineTo(RemNode, Sub);
    }
    return V;
  }

  // sdiv, srem -> sdivrem
  // If the divisor is constant, then return DIVREM only if isIntDivCheap() is
  // true.  Otherwise, we break the simplification logic in visitREM().
  AttributeList Attr = DAG.getMachineFunction().getFunction().getAttributes();
  if (!N1C || TLI.isIntDivCheap(N->getValueType(0), Attr))
    if (SDValue DivRem = useDivRem(N))
        return DivRem;

  // Simplify the operands using demanded-bits information.
  // We don't have demanded bits support for UDIV so this just enables constant
  // folding based on known bits.
  if (SimplifyDemandedBits(SDValue(N, 0)))
    return SDValue(N, 0);

  return SDValue();
}

SDValue DAGCombiner::visitUDIVLike(SDValue N0, SDValue N1, SDNode *N) {
  SDLoc DL(N);
  EVT VT = N->getValueType(0);

  // fold (udiv x, (1 << c)) -> x >>u c
  if (isConstantOrConstantVector(N1, /*NoOpaques*/ true)) {
    if (SDValue LogBase2 = BuildLogBase2(N1, DL)) {
      AddToWorklist(LogBase2.getNode());

      EVT ShiftVT = getShiftAmountTy(N0.getValueType());
      SDValue Trunc = DAG.getZExtOrTrunc(LogBase2, DL, ShiftVT);
      AddToWorklist(Trunc.getNode());
      return DAG.getNode(ISD::SRL, DL, VT, N0, Trunc);
    }
  }

  // fold (udiv x, (shl c, y)) -> x >>u (log2(c)+y) iff c is power of 2
  if (N1.getOpcode() == ISD::SHL) {
    SDValue N10 = N1.getOperand(0);
    if (isConstantOrConstantVector(N10, /*NoOpaques*/ true)) {
      if (SDValue LogBase2 = BuildLogBase2(N10, DL)) {
        AddToWorklist(LogBase2.getNode());

        EVT ADDVT = N1.getOperand(1).getValueType();
        SDValue Trunc = DAG.getZExtOrTrunc(LogBase2, DL, ADDVT);
        AddToWorklist(Trunc.getNode());
        SDValue Add = DAG.getNode(ISD::ADD, DL, ADDVT, N1.getOperand(1), Trunc);
        AddToWorklist(Add.getNode());
        return DAG.getNode(ISD::SRL, DL, VT, N0, Add);
      }
    }
  }

  // fold (udiv x, c) -> alternate
  AttributeList Attr = DAG.getMachineFunction().getFunction().getAttributes();
  if (isConstantOrConstantVector(N1) &&
      !TLI.isIntDivCheap(N->getValueType(0), Attr))
    if (SDValue Op = BuildUDIV(N))
      return Op;

  return SDValue();
}

SDValue DAGCombiner::buildOptimizedSREM(SDValue N0, SDValue N1, SDNode *N) {
  if (!N->getFlags().hasExact() && isDivisorPowerOfTwo(N1) &&
      !DAG.doesNodeExist(ISD::SDIV, N->getVTList(), {N0, N1})) {
    // Target-specific implementation of srem x, pow2.
    if (SDValue Res = BuildSREMPow2(N))
      return Res;
  }
  return SDValue();
}

// handles ISD::SREM and ISD::UREM
SDValue DAGCombiner::visitREM(SDNode *N) {
  unsigned Opcode = N->getOpcode();
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  EVT CCVT = getSetCCResultType(VT);

  bool isSigned = (Opcode == ISD::SREM);
  SDLoc DL(N);

  // fold (rem c1, c2) -> c1%c2
  if (SDValue C = DAG.FoldConstantArithmetic(Opcode, DL, VT, {N0, N1}))
    return C;

  // fold (urem X, -1) -> select(FX == -1, 0, FX)
  // Freeze the numerator to avoid a miscompile with an undefined value.
  if (!isSigned && llvm::isAllOnesOrAllOnesSplat(N1, /*AllowUndefs*/ false) &&
      CCVT.isVector() == VT.isVector()) {
    SDValue F0 = DAG.getFreeze(N0);
    SDValue EqualsNeg1 = DAG.getSetCC(DL, CCVT, F0, N1, ISD::SETEQ);
    return DAG.getSelect(DL, VT, EqualsNeg1, DAG.getConstant(0, DL, VT), F0);
  }

  if (SDValue V = simplifyDivRem(N, DAG))
    return V;

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  if (isSigned) {
    // If we know the sign bits of both operands are zero, strength reduce to a
    // urem instead.  Handles (X & 0x0FFFFFFF) %s 16 -> X&15
    if (DAG.SignBitIsZero(N1) && DAG.SignBitIsZero(N0))
      return DAG.getNode(ISD::UREM, DL, VT, N0, N1);
  } else {
    if (DAG.isKnownToBeAPowerOfTwo(N1)) {
      // fold (urem x, pow2) -> (and x, pow2-1)
      SDValue NegOne = DAG.getAllOnesConstant(DL, VT);
      SDValue Add = DAG.getNode(ISD::ADD, DL, VT, N1, NegOne);
      AddToWorklist(Add.getNode());
      return DAG.getNode(ISD::AND, DL, VT, N0, Add);
    }
    // fold (urem x, (shl pow2, y)) -> (and x, (add (shl pow2, y), -1))
    // fold (urem x, (lshr pow2, y)) -> (and x, (add (lshr pow2, y), -1))
    // TODO: We should sink the following into isKnownToBePowerOfTwo
    // using a OrZero parameter analogous to our handling in ValueTracking.
    if ((N1.getOpcode() == ISD::SHL || N1.getOpcode() == ISD::SRL) &&
        DAG.isKnownToBeAPowerOfTwo(N1.getOperand(0))) {
      SDValue NegOne = DAG.getAllOnesConstant(DL, VT);
      SDValue Add = DAG.getNode(ISD::ADD, DL, VT, N1, NegOne);
      AddToWorklist(Add.getNode());
      return DAG.getNode(ISD::AND, DL, VT, N0, Add);
    }
  }

  AttributeList Attr = DAG.getMachineFunction().getFunction().getAttributes();

  // If X/C can be simplified by the division-by-constant logic, lower
  // X%C to the equivalent of X-X/C*C.
  // Reuse the SDIVLike/UDIVLike combines - to avoid mangling nodes, the
  // speculative DIV must not cause a DIVREM conversion.  We guard against this
  // by skipping the simplification if isIntDivCheap().  When div is not cheap,
  // combine will not return a DIVREM.  Regardless, checking cheapness here
  // makes sense since the simplification results in fatter code.
  if (DAG.isKnownNeverZero(N1) && !TLI.isIntDivCheap(VT, Attr)) {
    if (isSigned) {
      // check if we can build faster implementation for srem
      if (SDValue OptimizedRem = buildOptimizedSREM(N0, N1, N))
        return OptimizedRem;
    }

    SDValue OptimizedDiv =
        isSigned ? visitSDIVLike(N0, N1, N) : visitUDIVLike(N0, N1, N);
    if (OptimizedDiv.getNode() && OptimizedDiv.getNode() != N) {
      // If the equivalent Div node also exists, update its users.
      unsigned DivOpcode = isSigned ? ISD::SDIV : ISD::UDIV;
      if (SDNode *DivNode = DAG.getNodeIfExists(DivOpcode, N->getVTList(),
                                                { N0, N1 }))
        CombineTo(DivNode, OptimizedDiv);
      SDValue Mul = DAG.getNode(ISD::MUL, DL, VT, OptimizedDiv, N1);
      SDValue Sub = DAG.getNode(ISD::SUB, DL, VT, N0, Mul);
      AddToWorklist(OptimizedDiv.getNode());
      AddToWorklist(Mul.getNode());
      return Sub;
    }
  }

  // sdiv, srem -> sdivrem
  if (SDValue DivRem = useDivRem(N))
    return DivRem.getValue(1);

  return SDValue();
}

SDValue DAGCombiner::visitMULHS(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // fold (mulhs c1, c2)
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::MULHS, DL, VT, {N0, N1}))
    return C;

  // canonicalize constant to RHS.
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
      !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return DAG.getNode(ISD::MULHS, DL, N->getVTList(), N1, N0);

  if (VT.isVector()) {
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

    // fold (mulhs x, 0) -> 0
    // do not return N1, because undef node may exist.
    if (ISD::isConstantSplatVectorAllZeros(N1.getNode()))
      return DAG.getConstant(0, DL, VT);
  }

  // fold (mulhs x, 0) -> 0
  if (isNullConstant(N1))
    return N1;

  // fold (mulhs x, 1) -> (sra x, size(x)-1)
  if (isOneConstant(N1))
    return DAG.getNode(
        ISD::SRA, DL, VT, N0,
        DAG.getShiftAmountConstant(N0.getScalarValueSizeInBits() - 1, VT, DL));

  // fold (mulhs x, undef) -> 0
  if (N0.isUndef() || N1.isUndef())
    return DAG.getConstant(0, DL, VT);

  // If the type twice as wide is legal, transform the mulhs to a wider multiply
  // plus a shift.
  if (!TLI.isOperationLegalOrCustom(ISD::MULHS, VT) && VT.isSimple() &&
      !VT.isVector()) {
    MVT Simple = VT.getSimpleVT();
    unsigned SimpleSize = Simple.getSizeInBits();
    EVT NewVT = EVT::getIntegerVT(*DAG.getContext(), SimpleSize*2);
    if (TLI.isOperationLegal(ISD::MUL, NewVT)) {
      N0 = DAG.getNode(ISD::SIGN_EXTEND, DL, NewVT, N0);
      N1 = DAG.getNode(ISD::SIGN_EXTEND, DL, NewVT, N1);
      N1 = DAG.getNode(ISD::MUL, DL, NewVT, N0, N1);
      N1 = DAG.getNode(ISD::SRL, DL, NewVT, N1,
                       DAG.getShiftAmountConstant(SimpleSize, NewVT, DL));
      return DAG.getNode(ISD::TRUNCATE, DL, VT, N1);
    }
  }

  return SDValue();
}

SDValue DAGCombiner::visitMULHU(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // fold (mulhu c1, c2)
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::MULHU, DL, VT, {N0, N1}))
    return C;

  // canonicalize constant to RHS.
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
      !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return DAG.getNode(ISD::MULHU, DL, N->getVTList(), N1, N0);

  if (VT.isVector()) {
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

    // fold (mulhu x, 0) -> 0
    // do not return N1, because undef node may exist.
    if (ISD::isConstantSplatVectorAllZeros(N1.getNode()))
      return DAG.getConstant(0, DL, VT);
  }

  // fold (mulhu x, 0) -> 0
  if (isNullConstant(N1))
    return N1;

  // fold (mulhu x, 1) -> 0
  if (isOneConstant(N1))
    return DAG.getConstant(0, DL, VT);

  // fold (mulhu x, undef) -> 0
  if (N0.isUndef() || N1.isUndef())
    return DAG.getConstant(0, DL, VT);

  // fold (mulhu x, (1 << c)) -> x >> (bitwidth - c)
  if (isConstantOrConstantVector(N1, /*NoOpaques*/ true) &&
      hasOperation(ISD::SRL, VT)) {
    if (SDValue LogBase2 = BuildLogBase2(N1, DL)) {
      unsigned NumEltBits = VT.getScalarSizeInBits();
      SDValue SRLAmt = DAG.getNode(
          ISD::SUB, DL, VT, DAG.getConstant(NumEltBits, DL, VT), LogBase2);
      EVT ShiftVT = getShiftAmountTy(N0.getValueType());
      SDValue Trunc = DAG.getZExtOrTrunc(SRLAmt, DL, ShiftVT);
      return DAG.getNode(ISD::SRL, DL, VT, N0, Trunc);
    }
  }

  // If the type twice as wide is legal, transform the mulhu to a wider multiply
  // plus a shift.
  if (!TLI.isOperationLegalOrCustom(ISD::MULHU, VT) && VT.isSimple() &&
      !VT.isVector()) {
    MVT Simple = VT.getSimpleVT();
    unsigned SimpleSize = Simple.getSizeInBits();
    EVT NewVT = EVT::getIntegerVT(*DAG.getContext(), SimpleSize*2);
    if (TLI.isOperationLegal(ISD::MUL, NewVT)) {
      N0 = DAG.getNode(ISD::ZERO_EXTEND, DL, NewVT, N0);
      N1 = DAG.getNode(ISD::ZERO_EXTEND, DL, NewVT, N1);
      N1 = DAG.getNode(ISD::MUL, DL, NewVT, N0, N1);
      N1 = DAG.getNode(ISD::SRL, DL, NewVT, N1,
                       DAG.getShiftAmountConstant(SimpleSize, NewVT, DL));
      return DAG.getNode(ISD::TRUNCATE, DL, VT, N1);
    }
  }

  // Simplify the operands using demanded-bits information.
  // We don't have demanded bits support for MULHU so this just enables constant
  // folding based on known bits.
  if (SimplifyDemandedBits(SDValue(N, 0)))
    return SDValue(N, 0);

  return SDValue();
}

SDValue DAGCombiner::visitAVG(SDNode *N) {
  unsigned Opcode = N->getOpcode();
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);
  bool IsSigned = Opcode == ISD::AVGCEILS || Opcode == ISD::AVGFLOORS;

  // fold (avg c1, c2)
  if (SDValue C = DAG.FoldConstantArithmetic(Opcode, DL, VT, {N0, N1}))
    return C;

  // canonicalize constant to RHS.
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
      !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return DAG.getNode(Opcode, DL, N->getVTList(), N1, N0);

  if (VT.isVector())
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

  // fold (avg x, undef) -> x
  if (N0.isUndef())
    return N1;
  if (N1.isUndef())
    return N0;

  // fold (avg x, x) --> x
  if (N0 == N1 && Level >= AfterLegalizeTypes)
    return N0;

  // fold (avgfloor x, 0) -> x >> 1
  SDValue X, Y;
  if (sd_match(N, m_c_BinOp(ISD::AVGFLOORS, m_Value(X), m_Zero())))
    return DAG.getNode(ISD::SRA, DL, VT, X,
                       DAG.getShiftAmountConstant(1, VT, DL));
  if (sd_match(N, m_c_BinOp(ISD::AVGFLOORU, m_Value(X), m_Zero())))
    return DAG.getNode(ISD::SRL, DL, VT, X,
                       DAG.getShiftAmountConstant(1, VT, DL));

  // fold avgu(zext(x), zext(y)) -> zext(avgu(x, y))
  // fold avgs(sext(x), sext(y)) -> sext(avgs(x, y))
  if (!IsSigned &&
      sd_match(N, m_BinOp(Opcode, m_ZExt(m_Value(X)), m_ZExt(m_Value(Y)))) &&
      X.getValueType() == Y.getValueType() &&
      hasOperation(Opcode, X.getValueType())) {
    SDValue AvgU = DAG.getNode(Opcode, DL, X.getValueType(), X, Y);
    return DAG.getNode(ISD::ZERO_EXTEND, DL, VT, AvgU);
  }
  if (IsSigned &&
      sd_match(N, m_BinOp(Opcode, m_SExt(m_Value(X)), m_SExt(m_Value(Y)))) &&
      X.getValueType() == Y.getValueType() &&
      hasOperation(Opcode, X.getValueType())) {
    SDValue AvgS = DAG.getNode(Opcode, DL, X.getValueType(), X, Y);
    return DAG.getNode(ISD::SIGN_EXTEND, DL, VT, AvgS);
  }

  // Fold avgflooru(x,y) -> avgceilu(x,y-1) iff y != 0
  // Fold avgflooru(x,y) -> avgceilu(x-1,y) iff x != 0
  // Check if avgflooru isn't legal/custom but avgceilu is.
  if (Opcode == ISD::AVGFLOORU && !hasOperation(ISD::AVGFLOORU, VT) &&
      (!LegalOperations || hasOperation(ISD::AVGCEILU, VT))) {
    if (DAG.isKnownNeverZero(N1))
      return DAG.getNode(
          ISD::AVGCEILU, DL, VT, N0,
          DAG.getNode(ISD::ADD, DL, VT, N1, DAG.getAllOnesConstant(DL, VT)));
    if (DAG.isKnownNeverZero(N0))
      return DAG.getNode(
          ISD::AVGCEILU, DL, VT, N1,
          DAG.getNode(ISD::ADD, DL, VT, N0, DAG.getAllOnesConstant(DL, VT)));
  }

  // Fold avgfloor((add nw x,y), 1) -> avgceil(x,y)
  // Fold avgfloor((add nw x,1), y) -> avgceil(x,y)
  if ((Opcode == ISD::AVGFLOORU && hasOperation(ISD::AVGCEILU, VT)) ||
      (Opcode == ISD::AVGFLOORS && hasOperation(ISD::AVGCEILS, VT))) {
    SDValue Add;
    if (sd_match(N,
                 m_c_BinOp(Opcode,
                           m_AllOf(m_Value(Add), m_Add(m_Value(X), m_Value(Y))),
                           m_One())) ||
        sd_match(N, m_c_BinOp(Opcode,
                              m_AllOf(m_Value(Add), m_Add(m_Value(X), m_One())),
                              m_Value(Y)))) {

      if (IsSigned && Add->getFlags().hasNoSignedWrap())
        return DAG.getNode(ISD::AVGCEILS, DL, VT, X, Y);

      if (!IsSigned && Add->getFlags().hasNoUnsignedWrap())
        return DAG.getNode(ISD::AVGCEILU, DL, VT, X, Y);
    }
  }

  return SDValue();
}

SDValue DAGCombiner::visitABD(SDNode *N) {
  unsigned Opcode = N->getOpcode();
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // fold (abd c1, c2)
  if (SDValue C = DAG.FoldConstantArithmetic(Opcode, DL, VT, {N0, N1}))
    return C;

  // canonicalize constant to RHS.
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
      !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return DAG.getNode(Opcode, DL, N->getVTList(), N1, N0);

  if (VT.isVector())
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

  // fold (abd x, undef) -> 0
  if (N0.isUndef() || N1.isUndef())
    return DAG.getConstant(0, DL, VT);

  // fold (abd x, x) -> 0
  if (N0 == N1)
    return DAG.getConstant(0, DL, VT);

  SDValue X;

  // fold (abds x, 0) -> abs x
  if (sd_match(N, m_c_BinOp(ISD::ABDS, m_Value(X), m_Zero())) &&
      (!LegalOperations || hasOperation(ISD::ABS, VT)))
    return DAG.getNode(ISD::ABS, DL, VT, X);

  // fold (abdu x, 0) -> x
  if (sd_match(N, m_c_BinOp(ISD::ABDU, m_Value(X), m_Zero())))
    return X;

  // fold (abds x, y) -> (abdu x, y) iff both args are known positive
  if (Opcode == ISD::ABDS && hasOperation(ISD::ABDU, VT) &&
      DAG.SignBitIsZero(N0) && DAG.SignBitIsZero(N1))
    return DAG.getNode(ISD::ABDU, DL, VT, N1, N0);

  return SDValue();
}

/// Perform optimizations common to nodes that compute two values. LoOp and HiOp
/// give the opcodes for the two computations that are being performed. Return
/// true if a simplification was made.
SDValue DAGCombiner::SimplifyNodeWithTwoResults(SDNode *N, unsigned LoOp,
                                                unsigned HiOp) {
  // If the high half is not needed, just compute the low half.
  bool HiExists = N->hasAnyUseOfValue(1);
  if (!HiExists && (!LegalOperations ||
                    TLI.isOperationLegalOrCustom(LoOp, N->getValueType(0)))) {
    SDValue Res = DAG.getNode(LoOp, SDLoc(N), N->getValueType(0), N->ops());
    return CombineTo(N, Res, Res);
  }

  // If the low half is not needed, just compute the high half.
  bool LoExists = N->hasAnyUseOfValue(0);
  if (!LoExists && (!LegalOperations ||
                    TLI.isOperationLegalOrCustom(HiOp, N->getValueType(1)))) {
    SDValue Res = DAG.getNode(HiOp, SDLoc(N), N->getValueType(1), N->ops());
    return CombineTo(N, Res, Res);
  }

  // If both halves are used, return as it is.
  if (LoExists && HiExists)
    return SDValue();

  // If the two computed results can be simplified separately, separate them.
  if (LoExists) {
    SDValue Lo = DAG.getNode(LoOp, SDLoc(N), N->getValueType(0), N->ops());
    AddToWorklist(Lo.getNode());
    SDValue LoOpt = combine(Lo.getNode());
    if (LoOpt.getNode() && LoOpt.getNode() != Lo.getNode() &&
        (!LegalOperations ||
         TLI.isOperationLegalOrCustom(LoOpt.getOpcode(), LoOpt.getValueType())))
      return CombineTo(N, LoOpt, LoOpt);
  }

  if (HiExists) {
    SDValue Hi = DAG.getNode(HiOp, SDLoc(N), N->getValueType(1), N->ops());
    AddToWorklist(Hi.getNode());
    SDValue HiOpt = combine(Hi.getNode());
    if (HiOpt.getNode() && HiOpt != Hi &&
        (!LegalOperations ||
         TLI.isOperationLegalOrCustom(HiOpt.getOpcode(), HiOpt.getValueType())))
      return CombineTo(N, HiOpt, HiOpt);
  }

  return SDValue();
}

SDValue DAGCombiner::visitSMUL_LOHI(SDNode *N) {
  if (SDValue Res = SimplifyNodeWithTwoResults(N, ISD::MUL, ISD::MULHS))
    return Res;

  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // Constant fold.
  if (isa<ConstantSDNode>(N0) && isa<ConstantSDNode>(N1))
    return DAG.getNode(ISD::SMUL_LOHI, DL, N->getVTList(), N0, N1);

  // canonicalize constant to RHS (vector doesn't have to splat)
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
      !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return DAG.getNode(ISD::SMUL_LOHI, DL, N->getVTList(), N1, N0);

  // If the type is twice as wide is legal, transform the mulhu to a wider
  // multiply plus a shift.
  if (VT.isSimple() && !VT.isVector()) {
    MVT Simple = VT.getSimpleVT();
    unsigned SimpleSize = Simple.getSizeInBits();
    EVT NewVT = EVT::getIntegerVT(*DAG.getContext(), SimpleSize*2);
    if (TLI.isOperationLegal(ISD::MUL, NewVT)) {
      SDValue Lo = DAG.getNode(ISD::SIGN_EXTEND, DL, NewVT, N0);
      SDValue Hi = DAG.getNode(ISD::SIGN_EXTEND, DL, NewVT, N1);
      Lo = DAG.getNode(ISD::MUL, DL, NewVT, Lo, Hi);
      // Compute the high part as N1.
      Hi = DAG.getNode(ISD::SRL, DL, NewVT, Lo,
                       DAG.getShiftAmountConstant(SimpleSize, NewVT, DL));
      Hi = DAG.getNode(ISD::TRUNCATE, DL, VT, Hi);
      // Compute the low part as N0.
      Lo = DAG.getNode(ISD::TRUNCATE, DL, VT, Lo);
      return CombineTo(N, Lo, Hi);
    }
  }

  return SDValue();
}

SDValue DAGCombiner::visitUMUL_LOHI(SDNode *N) {
  if (SDValue Res = SimplifyNodeWithTwoResults(N, ISD::MUL, ISD::MULHU))
    return Res;

  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // Constant fold.
  if (isa<ConstantSDNode>(N0) && isa<ConstantSDNode>(N1))
    return DAG.getNode(ISD::UMUL_LOHI, DL, N->getVTList(), N0, N1);

  // canonicalize constant to RHS (vector doesn't have to splat)
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
      !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return DAG.getNode(ISD::UMUL_LOHI, DL, N->getVTList(), N1, N0);

  // (umul_lohi N0, 0) -> (0, 0)
  if (isNullConstant(N1)) {
    SDValue Zero = DAG.getConstant(0, DL, VT);
    return CombineTo(N, Zero, Zero);
  }

  // (umul_lohi N0, 1) -> (N0, 0)
  if (isOneConstant(N1)) {
    SDValue Zero = DAG.getConstant(0, DL, VT);
    return CombineTo(N, N0, Zero);
  }

  // If the type is twice as wide is legal, transform the mulhu to a wider
  // multiply plus a shift.
  if (VT.isSimple() && !VT.isVector()) {
    MVT Simple = VT.getSimpleVT();
    unsigned SimpleSize = Simple.getSizeInBits();
    EVT NewVT = EVT::getIntegerVT(*DAG.getContext(), SimpleSize*2);
    if (TLI.isOperationLegal(ISD::MUL, NewVT)) {
      SDValue Lo = DAG.getNode(ISD::ZERO_EXTEND, DL, NewVT, N0);
      SDValue Hi = DAG.getNode(ISD::ZERO_EXTEND, DL, NewVT, N1);
      Lo = DAG.getNode(ISD::MUL, DL, NewVT, Lo, Hi);
      // Compute the high part as N1.
      Hi = DAG.getNode(ISD::SRL, DL, NewVT, Lo,
                       DAG.getShiftAmountConstant(SimpleSize, NewVT, DL));
      Hi = DAG.getNode(ISD::TRUNCATE, DL, VT, Hi);
      // Compute the low part as N0.
      Lo = DAG.getNode(ISD::TRUNCATE, DL, VT, Lo);
      return CombineTo(N, Lo, Hi);
    }
  }

  return SDValue();
}

SDValue DAGCombiner::visitMULO(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N0.getValueType();
  bool IsSigned = (ISD::SMULO == N->getOpcode());

  EVT CarryVT = N->getValueType(1);
  SDLoc DL(N);

  ConstantSDNode *N0C = isConstOrConstSplat(N0);
  ConstantSDNode *N1C = isConstOrConstSplat(N1);

  // fold operation with constant operands.
  // TODO: Move this to FoldConstantArithmetic when it supports nodes with
  // multiple results.
  if (N0C && N1C) {
    bool Overflow;
    APInt Result =
        IsSigned ? N0C->getAPIntValue().smul_ov(N1C->getAPIntValue(), Overflow)
                 : N0C->getAPIntValue().umul_ov(N1C->getAPIntValue(), Overflow);
    return CombineTo(N, DAG.getConstant(Result, DL, VT),
                     DAG.getBoolConstant(Overflow, DL, CarryVT, CarryVT));
  }

  // canonicalize constant to RHS.
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
      !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return DAG.getNode(N->getOpcode(), DL, N->getVTList(), N1, N0);

  // fold (mulo x, 0) -> 0 + no carry out
  if (isNullOrNullSplat(N1))
    return CombineTo(N, DAG.getConstant(0, DL, VT),
                     DAG.getConstant(0, DL, CarryVT));

  // (mulo x, 2) -> (addo x, x)
  // FIXME: This needs a freeze.
  if (N1C && N1C->getAPIntValue() == 2 &&
      (!IsSigned || VT.getScalarSizeInBits() > 2))
    return DAG.getNode(IsSigned ? ISD::SADDO : ISD::UADDO, DL,
                       N->getVTList(), N0, N0);

  // A 1 bit SMULO overflows if both inputs are 1.
  if (IsSigned && VT.getScalarSizeInBits() == 1) {
    SDValue And = DAG.getNode(ISD::AND, DL, VT, N0, N1);
    SDValue Cmp = DAG.getSetCC(DL, CarryVT, And,
                               DAG.getConstant(0, DL, VT), ISD::SETNE);
    return CombineTo(N, And, Cmp);
  }

  // If it cannot overflow, transform into a mul.
  if (DAG.willNotOverflowMul(IsSigned, N0, N1))
    return CombineTo(N, DAG.getNode(ISD::MUL, DL, VT, N0, N1),
                     DAG.getConstant(0, DL, CarryVT));
  return SDValue();
}

// Function to calculate whether the Min/Max pair of SDNodes (potentially
// swapped around) make a signed saturate pattern, clamping to between a signed
// saturate of -2^(BW-1) and 2^(BW-1)-1, or an unsigned saturate of 0 and 2^BW.
// Returns the node being clamped and the bitwidth of the clamp in BW. Should
// work with both SMIN/SMAX nodes and setcc/select combo. The operands are the
// same as SimplifySelectCC. N0<N1 ? N2 : N3.
static SDValue isSaturatingMinMax(SDValue N0, SDValue N1, SDValue N2,
                                  SDValue N3, ISD::CondCode CC, unsigned &BW,
                                  bool &Unsigned, SelectionDAG &DAG) {
  auto isSignedMinMax = [&](SDValue N0, SDValue N1, SDValue N2, SDValue N3,
                            ISD::CondCode CC) {
    // The compare and select operand should be the same or the select operands
    // should be truncated versions of the comparison.
    if (N0 != N2 && (N2.getOpcode() != ISD::TRUNCATE || N0 != N2.getOperand(0)))
      return 0;
    // The constants need to be the same or a truncated version of each other.
    ConstantSDNode *N1C = isConstOrConstSplat(peekThroughTruncates(N1));
    ConstantSDNode *N3C = isConstOrConstSplat(peekThroughTruncates(N3));
    if (!N1C || !N3C)
      return 0;
    const APInt &C1 = N1C->getAPIntValue().trunc(N1.getScalarValueSizeInBits());
    const APInt &C2 = N3C->getAPIntValue().trunc(N3.getScalarValueSizeInBits());
    if (C1.getBitWidth() < C2.getBitWidth() || C1 != C2.sext(C1.getBitWidth()))
      return 0;
    return CC == ISD::SETLT ? ISD::SMIN : (CC == ISD::SETGT ? ISD::SMAX : 0);
  };

  // Check the initial value is a SMIN/SMAX equivalent.
  unsigned Opcode0 = isSignedMinMax(N0, N1, N2, N3, CC);
  if (!Opcode0)
    return SDValue();

  // We could only need one range check, if the fptosi could never produce
  // the upper value.
  if (N0.getOpcode() == ISD::FP_TO_SINT && Opcode0 == ISD::SMAX) {
    if (isNullOrNullSplat(N3)) {
      EVT IntVT = N0.getValueType().getScalarType();
      EVT FPVT = N0.getOperand(0).getValueType().getScalarType();
      if (FPVT.isSimple()) {
        Type *InputTy = FPVT.getTypeForEVT(*DAG.getContext());
        const fltSemantics &Semantics = InputTy->getFltSemantics();
        uint32_t MinBitWidth =
          APFloatBase::semanticsIntSizeInBits(Semantics, /*isSigned*/ true);
        if (IntVT.getSizeInBits() >= MinBitWidth) {
          Unsigned = true;
          BW = PowerOf2Ceil(MinBitWidth);
          return N0;
        }
      }
    }
  }

  SDValue N00, N01, N02, N03;
  ISD::CondCode N0CC;
  switch (N0.getOpcode()) {
  case ISD::SMIN:
  case ISD::SMAX:
    N00 = N02 = N0.getOperand(0);
    N01 = N03 = N0.getOperand(1);
    N0CC = N0.getOpcode() == ISD::SMIN ? ISD::SETLT : ISD::SETGT;
    break;
  case ISD::SELECT_CC:
    N00 = N0.getOperand(0);
    N01 = N0.getOperand(1);
    N02 = N0.getOperand(2);
    N03 = N0.getOperand(3);
    N0CC = cast<CondCodeSDNode>(N0.getOperand(4))->get();
    break;
  case ISD::SELECT:
  case ISD::VSELECT:
    if (N0.getOperand(0).getOpcode() != ISD::SETCC)
      return SDValue();
    N00 = N0.getOperand(0).getOperand(0);
    N01 = N0.getOperand(0).getOperand(1);
    N02 = N0.getOperand(1);
    N03 = N0.getOperand(2);
    N0CC = cast<CondCodeSDNode>(N0.getOperand(0).getOperand(2))->get();
    break;
  default:
    return SDValue();
  }

  unsigned Opcode1 = isSignedMinMax(N00, N01, N02, N03, N0CC);
  if (!Opcode1 || Opcode0 == Opcode1)
    return SDValue();

  ConstantSDNode *MinCOp = isConstOrConstSplat(Opcode0 == ISD::SMIN ? N1 : N01);
  ConstantSDNode *MaxCOp = isConstOrConstSplat(Opcode0 == ISD::SMIN ? N01 : N1);
  if (!MinCOp || !MaxCOp || MinCOp->getValueType(0) != MaxCOp->getValueType(0))
    return SDValue();

  const APInt &MinC = MinCOp->getAPIntValue();
  const APInt &MaxC = MaxCOp->getAPIntValue();
  APInt MinCPlus1 = MinC + 1;
  if (-MaxC == MinCPlus1 && MinCPlus1.isPowerOf2()) {
    BW = MinCPlus1.exactLogBase2() + 1;
    Unsigned = false;
    return N02;
  }

  if (MaxC == 0 && MinCPlus1.isPowerOf2()) {
    BW = MinCPlus1.exactLogBase2();
    Unsigned = true;
    return N02;
  }

  return SDValue();
}

static SDValue PerformMinMaxFpToSatCombine(SDValue N0, SDValue N1, SDValue N2,
                                           SDValue N3, ISD::CondCode CC,
                                           SelectionDAG &DAG) {
  unsigned BW;
  bool Unsigned;
  SDValue Fp = isSaturatingMinMax(N0, N1, N2, N3, CC, BW, Unsigned, DAG);
  if (!Fp || Fp.getOpcode() != ISD::FP_TO_SINT)
    return SDValue();
  EVT FPVT = Fp.getOperand(0).getValueType();
  EVT NewVT = EVT::getIntegerVT(*DAG.getContext(), BW);
  if (FPVT.isVector())
    NewVT = EVT::getVectorVT(*DAG.getContext(), NewVT,
                             FPVT.getVectorElementCount());
  unsigned NewOpc = Unsigned ? ISD::FP_TO_UINT_SAT : ISD::FP_TO_SINT_SAT;
  if (!DAG.getTargetLoweringInfo().shouldConvertFpToSat(NewOpc, FPVT, NewVT))
    return SDValue();
  SDLoc DL(Fp);
  SDValue Sat = DAG.getNode(NewOpc, DL, NewVT, Fp.getOperand(0),
                            DAG.getValueType(NewVT.getScalarType()));
  return DAG.getExtOrTrunc(!Unsigned, Sat, DL, N2->getValueType(0));
}

static SDValue PerformUMinFpToSatCombine(SDValue N0, SDValue N1, SDValue N2,
                                         SDValue N3, ISD::CondCode CC,
                                         SelectionDAG &DAG) {
  // We are looking for UMIN(FPTOUI(X), (2^n)-1), which may have come via a
  // select/vselect/select_cc. The two operands pairs for the select (N2/N3) may
  // be truncated versions of the setcc (N0/N1).
  if ((N0 != N2 &&
       (N2.getOpcode() != ISD::TRUNCATE || N0 != N2.getOperand(0))) ||
      N0.getOpcode() != ISD::FP_TO_UINT || CC != ISD::SETULT)
    return SDValue();
  ConstantSDNode *N1C = isConstOrConstSplat(N1);
  ConstantSDNode *N3C = isConstOrConstSplat(N3);
  if (!N1C || !N3C)
    return SDValue();
  const APInt &C1 = N1C->getAPIntValue();
  const APInt &C3 = N3C->getAPIntValue();
  if (!(C1 + 1).isPowerOf2() || C1.getBitWidth() < C3.getBitWidth() ||
      C1 != C3.zext(C1.getBitWidth()))
    return SDValue();

  unsigned BW = (C1 + 1).exactLogBase2();
  EVT FPVT = N0.getOperand(0).getValueType();
  EVT NewVT = EVT::getIntegerVT(*DAG.getContext(), BW);
  if (FPVT.isVector())
    NewVT = EVT::getVectorVT(*DAG.getContext(), NewVT,
                             FPVT.getVectorElementCount());
  if (!DAG.getTargetLoweringInfo().shouldConvertFpToSat(ISD::FP_TO_UINT_SAT,
                                                        FPVT, NewVT))
    return SDValue();

  SDValue Sat =
      DAG.getNode(ISD::FP_TO_UINT_SAT, SDLoc(N0), NewVT, N0.getOperand(0),
                  DAG.getValueType(NewVT.getScalarType()));
  return DAG.getZExtOrTrunc(Sat, SDLoc(N0), N3.getValueType());
}

SDValue DAGCombiner::visitIMINMAX(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N0.getValueType();
  unsigned Opcode = N->getOpcode();
  SDLoc DL(N);

  // fold operation with constant operands.
  if (SDValue C = DAG.FoldConstantArithmetic(Opcode, DL, VT, {N0, N1}))
    return C;

  // If the operands are the same, this is a no-op.
  if (N0 == N1)
    return N0;

  // canonicalize constant to RHS
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
      !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return DAG.getNode(Opcode, DL, VT, N1, N0);

  // fold vector ops
  if (VT.isVector())
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

  // reassociate minmax
  if (SDValue RMINMAX = reassociateOps(Opcode, DL, N0, N1, N->getFlags()))
    return RMINMAX;

  // Is sign bits are zero, flip between UMIN/UMAX and SMIN/SMAX.
  // Only do this if:
  // 1. The current op isn't legal and the flipped is.
  // 2. The saturation pattern is broken by canonicalization in InstCombine.
  bool IsOpIllegal = !TLI.isOperationLegal(Opcode, VT);
  bool IsSatBroken = Opcode == ISD::UMIN && N0.getOpcode() == ISD::SMAX;
  if ((IsSatBroken || IsOpIllegal) && (N0.isUndef() || DAG.SignBitIsZero(N0)) &&
      (N1.isUndef() || DAG.SignBitIsZero(N1))) {
    unsigned AltOpcode;
    switch (Opcode) {
    case ISD::SMIN: AltOpcode = ISD::UMIN; break;
    case ISD::SMAX: AltOpcode = ISD::UMAX; break;
    case ISD::UMIN: AltOpcode = ISD::SMIN; break;
    case ISD::UMAX: AltOpcode = ISD::SMAX; break;
    default: llvm_unreachable("Unknown MINMAX opcode");
    }
    if ((IsSatBroken && IsOpIllegal) || TLI.isOperationLegal(AltOpcode, VT))
      return DAG.getNode(AltOpcode, DL, VT, N0, N1);
  }

  if (Opcode == ISD::SMIN || Opcode == ISD::SMAX)
    if (SDValue S = PerformMinMaxFpToSatCombine(
            N0, N1, N0, N1, Opcode == ISD::SMIN ? ISD::SETLT : ISD::SETGT, DAG))
      return S;
  if (Opcode == ISD::UMIN)
    if (SDValue S = PerformUMinFpToSatCombine(N0, N1, N0, N1, ISD::SETULT, DAG))
      return S;

  // Fold min/max(vecreduce(x), vecreduce(y)) -> vecreduce(min/max(x, y))
  auto ReductionOpcode = [](unsigned Opcode) {
    switch (Opcode) {
    case ISD::SMIN:
      return ISD::VECREDUCE_SMIN;
    case ISD::SMAX:
      return ISD::VECREDUCE_SMAX;
    case ISD::UMIN:
      return ISD::VECREDUCE_UMIN;
    case ISD::UMAX:
      return ISD::VECREDUCE_UMAX;
    default:
      llvm_unreachable("Unexpected opcode");
    }
  };
  if (SDValue SD = reassociateReduction(ReductionOpcode(Opcode), Opcode,
                                        SDLoc(N), VT, N0, N1))
    return SD;

  // Simplify the operands using demanded-bits information.
  if (SimplifyDemandedBits(SDValue(N, 0)))
    return SDValue(N, 0);

  return SDValue();
}

/// If this is a bitwise logic instruction and both operands have the same
/// opcode, try to sink the other opcode after the logic instruction.
SDValue DAGCombiner::hoistLogicOpWithSameOpcodeHands(SDNode *N) {
  SDValue N0 = N->getOperand(0), N1 = N->getOperand(1);
  EVT VT = N0.getValueType();
  unsigned LogicOpcode = N->getOpcode();
  unsigned HandOpcode = N0.getOpcode();
  assert(ISD::isBitwiseLogicOp(LogicOpcode) && "Expected logic opcode");
  assert(HandOpcode == N1.getOpcode() && "Bad input!");

  // Bail early if none of these transforms apply.
  if (N0.getNumOperands() == 0)
    return SDValue();

  // FIXME: We should check number of uses of the operands to not increase
  //        the instruction count for all transforms.

  // Handle size-changing casts (or sign_extend_inreg).
  SDValue X = N0.getOperand(0);
  SDValue Y = N1.getOperand(0);
  EVT XVT = X.getValueType();
  SDLoc DL(N);
  if (ISD::isExtOpcode(HandOpcode) || ISD::isExtVecInRegOpcode(HandOpcode) ||
      (HandOpcode == ISD::SIGN_EXTEND_INREG &&
       N0.getOperand(1) == N1.getOperand(1))) {
    // If both operands have other uses, this transform would create extra
    // instructions without eliminating anything.
    if (!N0.hasOneUse() && !N1.hasOneUse())
      return SDValue();
    // We need matching integer source types.
    if (XVT != Y.getValueType())
      return SDValue();
    // Don't create an illegal op during or after legalization. Don't ever
    // create an unsupported vector op.
    if ((VT.isVector() || LegalOperations) &&
        !TLI.isOperationLegalOrCustom(LogicOpcode, XVT))
      return SDValue();
    // Avoid infinite looping with PromoteIntBinOp.
    // TODO: Should we apply desirable/legal constraints to all opcodes?
    if ((HandOpcode == ISD::ANY_EXTEND ||
         HandOpcode == ISD::ANY_EXTEND_VECTOR_INREG) &&
        LegalTypes && !TLI.isTypeDesirableForOp(LogicOpcode, XVT))
      return SDValue();
    // logic_op (hand_op X), (hand_op Y) --> hand_op (logic_op X, Y)
    SDValue Logic = DAG.getNode(LogicOpcode, DL, XVT, X, Y);
    if (HandOpcode == ISD::SIGN_EXTEND_INREG)
      return DAG.getNode(HandOpcode, DL, VT, Logic, N0.getOperand(1));
    return DAG.getNode(HandOpcode, DL, VT, Logic);
  }

  // logic_op (truncate x), (truncate y) --> truncate (logic_op x, y)
  if (HandOpcode == ISD::TRUNCATE) {
    // If both operands have other uses, this transform would create extra
    // instructions without eliminating anything.
    if (!N0.hasOneUse() && !N1.hasOneUse())
      return SDValue();
    // We need matching source types.
    if (XVT != Y.getValueType())
      return SDValue();
    // Don't create an illegal op during or after legalization.
    if (LegalOperations && !TLI.isOperationLegal(LogicOpcode, XVT))
      return SDValue();
    // Be extra careful sinking truncate. If it's free, there's no benefit in
    // widening a binop. Also, don't create a logic op on an illegal type.
    if (TLI.isZExtFree(VT, XVT) && TLI.isTruncateFree(XVT, VT))
      return SDValue();
    if (!TLI.isTypeLegal(XVT))
      return SDValue();
    SDValue Logic = DAG.getNode(LogicOpcode, DL, XVT, X, Y);
    return DAG.getNode(HandOpcode, DL, VT, Logic);
  }

  // For binops SHL/SRL/SRA/AND:
  //   logic_op (OP x, z), (OP y, z) --> OP (logic_op x, y), z
  if ((HandOpcode == ISD::SHL || HandOpcode == ISD::SRL ||
       HandOpcode == ISD::SRA || HandOpcode == ISD::AND) &&
      N0.getOperand(1) == N1.getOperand(1)) {
    // If either operand has other uses, this transform is not an improvement.
    if (!N0.hasOneUse() || !N1.hasOneUse())
      return SDValue();
    SDValue Logic = DAG.getNode(LogicOpcode, DL, XVT, X, Y);
    return DAG.getNode(HandOpcode, DL, VT, Logic, N0.getOperand(1));
  }

  // Unary ops: logic_op (bswap x), (bswap y) --> bswap (logic_op x, y)
  if (HandOpcode == ISD::BSWAP) {
    // If either operand has other uses, this transform is not an improvement.
    if (!N0.hasOneUse() || !N1.hasOneUse())
      return SDValue();
    SDValue Logic = DAG.getNode(LogicOpcode, DL, XVT, X, Y);
    return DAG.getNode(HandOpcode, DL, VT, Logic);
  }

  // For funnel shifts FSHL/FSHR:
  // logic_op (OP x, x1, s), (OP y, y1, s) -->
  // --> OP (logic_op x, y), (logic_op, x1, y1), s
  if ((HandOpcode == ISD::FSHL || HandOpcode == ISD::FSHR) &&
      N0.getOperand(2) == N1.getOperand(2)) {
    if (!N0.hasOneUse() || !N1.hasOneUse())
      return SDValue();
    SDValue X1 = N0.getOperand(1);
    SDValue Y1 = N1.getOperand(1);
    SDValue S = N0.getOperand(2);
    SDValue Logic0 = DAG.getNode(LogicOpcode, DL, VT, X, Y);
    SDValue Logic1 = DAG.getNode(LogicOpcode, DL, VT, X1, Y1);
    return DAG.getNode(HandOpcode, DL, VT, Logic0, Logic1, S);
  }

  // Simplify xor/and/or (bitcast(A), bitcast(B)) -> bitcast(op (A,B))
  // Only perform this optimization up until type legalization, before
  // LegalizeVectorOprs. LegalizeVectorOprs promotes vector operations by
  // adding bitcasts. For example (xor v4i32) is promoted to (v2i64), and
  // we don't want to undo this promotion.
  // We also handle SCALAR_TO_VECTOR because xor/or/and operations are cheaper
  // on scalars.
  if ((HandOpcode == ISD::BITCAST || HandOpcode == ISD::SCALAR_TO_VECTOR) &&
       Level <= AfterLegalizeTypes) {
    // Input types must be integer and the same.
    if (XVT.isInteger() && XVT == Y.getValueType() &&
        !(VT.isVector() && TLI.isTypeLegal(VT) &&
          !XVT.isVector() && !TLI.isTypeLegal(XVT))) {
      SDValue Logic = DAG.getNode(LogicOpcode, DL, XVT, X, Y);
      return DAG.getNode(HandOpcode, DL, VT, Logic);
    }
  }

  // Xor/and/or are indifferent to the swizzle operation (shuffle of one value).
  // Simplify xor/and/or (shuff(A), shuff(B)) -> shuff(op (A,B))
  // If both shuffles use the same mask, and both shuffle within a single
  // vector, then it is worthwhile to move the swizzle after the operation.
  // The type-legalizer generates this pattern when loading illegal
  // vector types from memory. In many cases this allows additional shuffle
  // optimizations.
  // There are other cases where moving the shuffle after the xor/and/or
  // is profitable even if shuffles don't perform a swizzle.
  // If both shuffles use the same mask, and both shuffles have the same first
  // or second operand, then it might still be profitable to move the shuffle
  // after the xor/and/or operation.
  if (HandOpcode == ISD::VECTOR_SHUFFLE && Level < AfterLegalizeDAG) {
    auto *SVN0 = cast<ShuffleVectorSDNode>(N0);
    auto *SVN1 = cast<ShuffleVectorSDNode>(N1);
    assert(X.getValueType() == Y.getValueType() &&
           "Inputs to shuffles are not the same type");

    // Check that both shuffles use the same mask. The masks are known to be of
    // the same length because the result vector type is the same.
    // Check also that shuffles have only one use to avoid introducing extra
    // instructions.
    if (!SVN0->hasOneUse() || !SVN1->hasOneUse() ||
        !SVN0->getMask().equals(SVN1->getMask()))
      return SDValue();

    // Don't try to fold this node if it requires introducing a
    // build vector of all zeros that might be illegal at this stage.
    SDValue ShOp = N0.getOperand(1);
    if (LogicOpcode == ISD::XOR && !ShOp.isUndef())
      ShOp = tryFoldToZero(DL, TLI, VT, DAG, LegalOperations);

    // (logic_op (shuf (A, C), shuf (B, C))) --> shuf (logic_op (A, B), C)
    if (N0.getOperand(1) == N1.getOperand(1) && ShOp.getNode()) {
      SDValue Logic = DAG.getNode(LogicOpcode, DL, VT,
                                  N0.getOperand(0), N1.getOperand(0));
      return DAG.getVectorShuffle(VT, DL, Logic, ShOp, SVN0->getMask());
    }

    // Don't try to fold this node if it requires introducing a
    // build vector of all zeros that might be illegal at this stage.
    ShOp = N0.getOperand(0);
    if (LogicOpcode == ISD::XOR && !ShOp.isUndef())
      ShOp = tryFoldToZero(DL, TLI, VT, DAG, LegalOperations);

    // (logic_op (shuf (C, A), shuf (C, B))) --> shuf (C, logic_op (A, B))
    if (N0.getOperand(0) == N1.getOperand(0) && ShOp.getNode()) {
      SDValue Logic = DAG.getNode(LogicOpcode, DL, VT, N0.getOperand(1),
                                  N1.getOperand(1));
      return DAG.getVectorShuffle(VT, DL, ShOp, Logic, SVN0->getMask());
    }
  }

  return SDValue();
}

/// Try to make (and/or setcc (LL, LR), setcc (RL, RR)) more efficient.
SDValue DAGCombiner::foldLogicOfSetCCs(bool IsAnd, SDValue N0, SDValue N1,
                                       const SDLoc &DL) {
  SDValue LL, LR, RL, RR, N0CC, N1CC;
  if (!isSetCCEquivalent(N0, LL, LR, N0CC) ||
      !isSetCCEquivalent(N1, RL, RR, N1CC))
    return SDValue();

  assert(N0.getValueType() == N1.getValueType() &&
         "Unexpected operand types for bitwise logic op");
  assert(LL.getValueType() == LR.getValueType() &&
         RL.getValueType() == RR.getValueType() &&
         "Unexpected operand types for setcc");

  // If we're here post-legalization or the logic op type is not i1, the logic
  // op type must match a setcc result type. Also, all folds require new
  // operations on the left and right operands, so those types must match.
  EVT VT = N0.getValueType();
  EVT OpVT = LL.getValueType();
  if (LegalOperations || VT.getScalarType() != MVT::i1)
    if (VT != getSetCCResultType(OpVT))
      return SDValue();
  if (OpVT != RL.getValueType())
    return SDValue();

  ISD::CondCode CC0 = cast<CondCodeSDNode>(N0CC)->get();
  ISD::CondCode CC1 = cast<CondCodeSDNode>(N1CC)->get();
  bool IsInteger = OpVT.isInteger();
  if (LR == RR && CC0 == CC1 && IsInteger) {
    bool IsZero = isNullOrNullSplat(LR);
    bool IsNeg1 = isAllOnesOrAllOnesSplat(LR);

    // All bits clear?
    bool AndEqZero = IsAnd && CC1 == ISD::SETEQ && IsZero;
    // All sign bits clear?
    bool AndGtNeg1 = IsAnd && CC1 == ISD::SETGT && IsNeg1;
    // Any bits set?
    bool OrNeZero = !IsAnd && CC1 == ISD::SETNE && IsZero;
    // Any sign bits set?
    bool OrLtZero = !IsAnd && CC1 == ISD::SETLT && IsZero;

    // (and (seteq X,  0), (seteq Y,  0)) --> (seteq (or X, Y),  0)
    // (and (setgt X, -1), (setgt Y, -1)) --> (setgt (or X, Y), -1)
    // (or  (setne X,  0), (setne Y,  0)) --> (setne (or X, Y),  0)
    // (or  (setlt X,  0), (setlt Y,  0)) --> (setlt (or X, Y),  0)
    if (AndEqZero || AndGtNeg1 || OrNeZero || OrLtZero) {
      SDValue Or = DAG.getNode(ISD::OR, SDLoc(N0), OpVT, LL, RL);
      AddToWorklist(Or.getNode());
      return DAG.getSetCC(DL, VT, Or, LR, CC1);
    }

    // All bits set?
    bool AndEqNeg1 = IsAnd && CC1 == ISD::SETEQ && IsNeg1;
    // All sign bits set?
    bool AndLtZero = IsAnd && CC1 == ISD::SETLT && IsZero;
    // Any bits clear?
    bool OrNeNeg1 = !IsAnd && CC1 == ISD::SETNE && IsNeg1;
    // Any sign bits clear?
    bool OrGtNeg1 = !IsAnd && CC1 == ISD::SETGT && IsNeg1;

    // (and (seteq X, -1), (seteq Y, -1)) --> (seteq (and X, Y), -1)
    // (and (setlt X,  0), (setlt Y,  0)) --> (setlt (and X, Y),  0)
    // (or  (setne X, -1), (setne Y, -1)) --> (setne (and X, Y), -1)
    // (or  (setgt X, -1), (setgt Y  -1)) --> (setgt (and X, Y), -1)
    if (AndEqNeg1 || AndLtZero || OrNeNeg1 || OrGtNeg1) {
      SDValue And = DAG.getNode(ISD::AND, SDLoc(N0), OpVT, LL, RL);
      AddToWorklist(And.getNode());
      return DAG.getSetCC(DL, VT, And, LR, CC1);
    }
  }

  // TODO: What is the 'or' equivalent of this fold?
  // (and (setne X, 0), (setne X, -1)) --> (setuge (add X, 1), 2)
  if (IsAnd && LL == RL && CC0 == CC1 && OpVT.getScalarSizeInBits() > 1 &&
      IsInteger && CC0 == ISD::SETNE &&
      ((isNullConstant(LR) && isAllOnesConstant(RR)) ||
       (isAllOnesConstant(LR) && isNullConstant(RR)))) {
    SDValue One = DAG.getConstant(1, DL, OpVT);
    SDValue Two = DAG.getConstant(2, DL, OpVT);
    SDValue Add = DAG.getNode(ISD::ADD, SDLoc(N0), OpVT, LL, One);
    AddToWorklist(Add.getNode());
    return DAG.getSetCC(DL, VT, Add, Two, ISD::SETUGE);
  }

  // Try more general transforms if the predicates match and the only user of
  // the compares is the 'and' or 'or'.
  if (IsInteger && TLI.convertSetCCLogicToBitwiseLogic(OpVT) && CC0 == CC1 &&
      N0.hasOneUse() && N1.hasOneUse()) {
    // and (seteq A, B), (seteq C, D) --> seteq (or (xor A, B), (xor C, D)), 0
    // or  (setne A, B), (setne C, D) --> setne (or (xor A, B), (xor C, D)), 0
    if ((IsAnd && CC1 == ISD::SETEQ) || (!IsAnd && CC1 == ISD::SETNE)) {
      SDValue XorL = DAG.getNode(ISD::XOR, SDLoc(N0), OpVT, LL, LR);
      SDValue XorR = DAG.getNode(ISD::XOR, SDLoc(N1), OpVT, RL, RR);
      SDValue Or = DAG.getNode(ISD::OR, DL, OpVT, XorL, XorR);
      SDValue Zero = DAG.getConstant(0, DL, OpVT);
      return DAG.getSetCC(DL, VT, Or, Zero, CC1);
    }

    // Turn compare of constants whose difference is 1 bit into add+and+setcc.
    if ((IsAnd && CC1 == ISD::SETNE) || (!IsAnd && CC1 == ISD::SETEQ)) {
      // Match a shared variable operand and 2 non-opaque constant operands.
      auto MatchDiffPow2 = [&](ConstantSDNode *C0, ConstantSDNode *C1) {
        // The difference of the constants must be a single bit.
        const APInt &CMax =
            APIntOps::umax(C0->getAPIntValue(), C1->getAPIntValue());
        const APInt &CMin =
            APIntOps::umin(C0->getAPIntValue(), C1->getAPIntValue());
        return !C0->isOpaque() && !C1->isOpaque() && (CMax - CMin).isPowerOf2();
      };
      if (LL == RL && ISD::matchBinaryPredicate(LR, RR, MatchDiffPow2)) {
        // and/or (setcc X, CMax, ne), (setcc X, CMin, ne/eq) -->
        // setcc ((sub X, CMin), ~(CMax - CMin)), 0, ne/eq
        SDValue Max = DAG.getNode(ISD::UMAX, DL, OpVT, LR, RR);
        SDValue Min = DAG.getNode(ISD::UMIN, DL, OpVT, LR, RR);
        SDValue Offset = DAG.getNode(ISD::SUB, DL, OpVT, LL, Min);
        SDValue Diff = DAG.getNode(ISD::SUB, DL, OpVT, Max, Min);
        SDValue Mask = DAG.getNOT(DL, Diff, OpVT);
        SDValue And = DAG.getNode(ISD::AND, DL, OpVT, Offset, Mask);
        SDValue Zero = DAG.getConstant(0, DL, OpVT);
        return DAG.getSetCC(DL, VT, And, Zero, CC0);
      }
    }
  }

  // Canonicalize equivalent operands to LL == RL.
  if (LL == RR && LR == RL) {
    CC1 = ISD::getSetCCSwappedOperands(CC1);
    std::swap(RL, RR);
  }

  // (and (setcc X, Y, CC0), (setcc X, Y, CC1)) --> (setcc X, Y, NewCC)
  // (or  (setcc X, Y, CC0), (setcc X, Y, CC1)) --> (setcc X, Y, NewCC)
  if (LL == RL && LR == RR) {
    ISD::CondCode NewCC = IsAnd ? ISD::getSetCCAndOperation(CC0, CC1, OpVT)
                                : ISD::getSetCCOrOperation(CC0, CC1, OpVT);
    if (NewCC != ISD::SETCC_INVALID &&
        (!LegalOperations ||
         (TLI.isCondCodeLegal(NewCC, LL.getSimpleValueType()) &&
          TLI.isOperationLegal(ISD::SETCC, OpVT))))
      return DAG.getSetCC(DL, VT, LL, LR, NewCC);
  }

  return SDValue();
}

static bool arebothOperandsNotSNan(SDValue Operand1, SDValue Operand2,
                                   SelectionDAG &DAG) {
  return DAG.isKnownNeverSNaN(Operand2) && DAG.isKnownNeverSNaN(Operand1);
}

static bool arebothOperandsNotNan(SDValue Operand1, SDValue Operand2,
                                  SelectionDAG &DAG) {
  return DAG.isKnownNeverNaN(Operand2) && DAG.isKnownNeverNaN(Operand1);
}

// FIXME: use FMINIMUMNUM if possible, such as for RISC-V.
static unsigned getMinMaxOpcodeForFP(SDValue Operand1, SDValue Operand2,
                                     ISD::CondCode CC, unsigned OrAndOpcode,
                                     SelectionDAG &DAG,
                                     bool isFMAXNUMFMINNUM_IEEE,
                                     bool isFMAXNUMFMINNUM) {
  // The optimization cannot be applied for all the predicates because
  // of the way FMINNUM/FMAXNUM and FMINNUM_IEEE/FMAXNUM_IEEE handle
  // NaNs. For FMINNUM_IEEE/FMAXNUM_IEEE, the optimization cannot be
  // applied at all if one of the operands is a signaling NaN.

  // It is safe to use FMINNUM_IEEE/FMAXNUM_IEEE if all the operands
  // are non NaN values.
  if (((CC == ISD::SETLT || CC == ISD::SETLE) && (OrAndOpcode == ISD::OR)) ||
      ((CC == ISD::SETGT || CC == ISD::SETGE) && (OrAndOpcode == ISD::AND)))
    return arebothOperandsNotNan(Operand1, Operand2, DAG) &&
                   isFMAXNUMFMINNUM_IEEE
               ? ISD::FMINNUM_IEEE
               : ISD::DELETED_NODE;
  else if (((CC == ISD::SETGT || CC == ISD::SETGE) &&
            (OrAndOpcode == ISD::OR)) ||
           ((CC == ISD::SETLT || CC == ISD::SETLE) &&
            (OrAndOpcode == ISD::AND)))
    return arebothOperandsNotNan(Operand1, Operand2, DAG) &&
                   isFMAXNUMFMINNUM_IEEE
               ? ISD::FMAXNUM_IEEE
               : ISD::DELETED_NODE;
  // Both FMINNUM/FMAXNUM and FMINNUM_IEEE/FMAXNUM_IEEE handle quiet
  // NaNs in the same way. But, FMINNUM/FMAXNUM and FMINNUM_IEEE/
  // FMAXNUM_IEEE handle signaling NaNs differently. If we cannot prove
  // that there are not any sNaNs, then the optimization is not valid
  // for FMINNUM_IEEE/FMAXNUM_IEEE. In the presence of sNaNs, we apply
  // the optimization using FMINNUM/FMAXNUM for the following cases. If
  // we can prove that we do not have any sNaNs, then we can do the
  // optimization using FMINNUM_IEEE/FMAXNUM_IEEE for the following
  // cases.
  else if (((CC == ISD::SETOLT || CC == ISD::SETOLE) &&
            (OrAndOpcode == ISD::OR)) ||
           ((CC == ISD::SETUGT || CC == ISD::SETUGE) &&
            (OrAndOpcode == ISD::AND)))
    return isFMAXNUMFMINNUM ? ISD::FMINNUM
                            : arebothOperandsNotSNan(Operand1, Operand2, DAG) &&
                                      isFMAXNUMFMINNUM_IEEE
                                  ? ISD::FMINNUM_IEEE
                                  : ISD::DELETED_NODE;
  else if (((CC == ISD::SETOGT || CC == ISD::SETOGE) &&
            (OrAndOpcode == ISD::OR)) ||
           ((CC == ISD::SETULT || CC == ISD::SETULE) &&
            (OrAndOpcode == ISD::AND)))
    return isFMAXNUMFMINNUM ? ISD::FMAXNUM
                            : arebothOperandsNotSNan(Operand1, Operand2, DAG) &&
                                      isFMAXNUMFMINNUM_IEEE
                                  ? ISD::FMAXNUM_IEEE
                                  : ISD::DELETED_NODE;
  return ISD::DELETED_NODE;
}

static SDValue foldAndOrOfSETCC(SDNode *LogicOp, SelectionDAG &DAG) {
  using AndOrSETCCFoldKind = TargetLowering::AndOrSETCCFoldKind;
  assert(
      (LogicOp->getOpcode() == ISD::AND || LogicOp->getOpcode() == ISD::OR) &&
      "Invalid Op to combine SETCC with");

  // TODO: Search past casts/truncates.
  SDValue LHS = LogicOp->getOperand(0);
  SDValue RHS = LogicOp->getOperand(1);
  if (LHS->getOpcode() != ISD::SETCC || RHS->getOpcode() != ISD::SETCC ||
      !LHS->hasOneUse() || !RHS->hasOneUse())
    return SDValue();

  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  AndOrSETCCFoldKind TargetPreference = TLI.isDesirableToCombineLogicOpOfSETCC(
      LogicOp, LHS.getNode(), RHS.getNode());

  SDValue LHS0 = LHS->getOperand(0);
  SDValue RHS0 = RHS->getOperand(0);
  SDValue LHS1 = LHS->getOperand(1);
  SDValue RHS1 = RHS->getOperand(1);
  // TODO: We don't actually need a splat here, for vectors we just need the
  // invariants to hold for each element.
  auto *LHS1C = isConstOrConstSplat(LHS1);
  auto *RHS1C = isConstOrConstSplat(RHS1);
  ISD::CondCode CCL = cast<CondCodeSDNode>(LHS.getOperand(2))->get();
  ISD::CondCode CCR = cast<CondCodeSDNode>(RHS.getOperand(2))->get();
  EVT VT = LogicOp->getValueType(0);
  EVT OpVT = LHS0.getValueType();
  SDLoc DL(LogicOp);

  // Check if the operands of an and/or operation are comparisons and if they
  // compare against the same value. Replace the and/or-cmp-cmp sequence with
  // min/max cmp sequence. If LHS1 is equal to RHS1, then the or-cmp-cmp
  // sequence will be replaced with min-cmp sequence:
  // (LHS0 < LHS1) | (RHS0 < RHS1) -> min(LHS0, RHS0) < LHS1
  // and and-cmp-cmp will be replaced with max-cmp sequence:
  // (LHS0 < LHS1) & (RHS0 < RHS1) -> max(LHS0, RHS0) < LHS1
  // The optimization does not work for `==` or `!=` .
  // The two comparisons should have either the same predicate or the
  // predicate of one of the comparisons is the opposite of the other one.
  bool isFMAXNUMFMINNUM_IEEE = TLI.isOperationLegal(ISD::FMAXNUM_IEEE, OpVT) &&
                               TLI.isOperationLegal(ISD::FMINNUM_IEEE, OpVT);
  bool isFMAXNUMFMINNUM = TLI.isOperationLegalOrCustom(ISD::FMAXNUM, OpVT) &&
                          TLI.isOperationLegalOrCustom(ISD::FMINNUM, OpVT);
  if (((OpVT.isInteger() && TLI.isOperationLegal(ISD::UMAX, OpVT) &&
        TLI.isOperationLegal(ISD::SMAX, OpVT) &&
        TLI.isOperationLegal(ISD::UMIN, OpVT) &&
        TLI.isOperationLegal(ISD::SMIN, OpVT)) ||
       (OpVT.isFloatingPoint() &&
        (isFMAXNUMFMINNUM_IEEE || isFMAXNUMFMINNUM))) &&
      !ISD::isIntEqualitySetCC(CCL) && !ISD::isFPEqualitySetCC(CCL) &&
      CCL != ISD::SETFALSE && CCL != ISD::SETO && CCL != ISD::SETUO &&
      CCL != ISD::SETTRUE &&
      (CCL == CCR || CCL == ISD::getSetCCSwappedOperands(CCR))) {

    SDValue CommonValue, Operand1, Operand2;
    ISD::CondCode CC = ISD::SETCC_INVALID;
    if (CCL == CCR) {
      if (LHS0 == RHS0) {
        CommonValue = LHS0;
        Operand1 = LHS1;
        Operand2 = RHS1;
        CC = ISD::getSetCCSwappedOperands(CCL);
      } else if (LHS1 == RHS1) {
        CommonValue = LHS1;
        Operand1 = LHS0;
        Operand2 = RHS0;
        CC = CCL;
      }
    } else {
      assert(CCL == ISD::getSetCCSwappedOperands(CCR) && "Unexpected CC");
      if (LHS0 == RHS1) {
        CommonValue = LHS0;
        Operand1 = LHS1;
        Operand2 = RHS0;
        CC = CCR;
      } else if (RHS0 == LHS1) {
        CommonValue = LHS1;
        Operand1 = LHS0;
        Operand2 = RHS1;
        CC = CCL;
      }
    }

    // Don't do this transform for sign bit tests. Let foldLogicOfSetCCs
    // handle it using OR/AND.
    if (CC == ISD::SETLT && isNullOrNullSplat(CommonValue))
      CC = ISD::SETCC_INVALID;
    else if (CC == ISD::SETGT && isAllOnesOrAllOnesSplat(CommonValue))
      CC = ISD::SETCC_INVALID;

    if (CC != ISD::SETCC_INVALID) {
      unsigned NewOpcode = ISD::DELETED_NODE;
      bool IsSigned = isSignedIntSetCC(CC);
      if (OpVT.isInteger()) {
        bool IsLess = (CC == ISD::SETLE || CC == ISD::SETULE ||
                       CC == ISD::SETLT || CC == ISD::SETULT);
        bool IsOr = (LogicOp->getOpcode() == ISD::OR);
        if (IsLess == IsOr)
          NewOpcode = IsSigned ? ISD::SMIN : ISD::UMIN;
        else
          NewOpcode = IsSigned ? ISD::SMAX : ISD::UMAX;
      } else if (OpVT.isFloatingPoint())
        NewOpcode =
            getMinMaxOpcodeForFP(Operand1, Operand2, CC, LogicOp->getOpcode(),
                                 DAG, isFMAXNUMFMINNUM_IEEE, isFMAXNUMFMINNUM);

      if (NewOpcode != ISD::DELETED_NODE) {
        SDValue MinMaxValue =
            DAG.getNode(NewOpcode, DL, OpVT, Operand1, Operand2);
        return DAG.getSetCC(DL, VT, MinMaxValue, CommonValue, CC);
      }
    }
  }

  if (TargetPreference == AndOrSETCCFoldKind::None)
    return SDValue();

  if (CCL == CCR &&
      CCL == (LogicOp->getOpcode() == ISD::AND ? ISD::SETNE : ISD::SETEQ) &&
      LHS0 == RHS0 && LHS1C && RHS1C && OpVT.isInteger()) {
    const APInt &APLhs = LHS1C->getAPIntValue();
    const APInt &APRhs = RHS1C->getAPIntValue();

    // Preference is to use ISD::ABS or we already have an ISD::ABS (in which
    // case this is just a compare).
    if (APLhs == (-APRhs) &&
        ((TargetPreference & AndOrSETCCFoldKind::ABS) ||
         DAG.doesNodeExist(ISD::ABS, DAG.getVTList(OpVT), {LHS0}))) {
      const APInt &C = APLhs.isNegative() ? APRhs : APLhs;
      // (icmp eq A, C) | (icmp eq A, -C)
      //    -> (icmp eq Abs(A), C)
      // (icmp ne A, C) & (icmp ne A, -C)
      //    -> (icmp ne Abs(A), C)
      SDValue AbsOp = DAG.getNode(ISD::ABS, DL, OpVT, LHS0);
      return DAG.getNode(ISD::SETCC, DL, VT, AbsOp,
                         DAG.getConstant(C, DL, OpVT), LHS.getOperand(2));
    } else if (TargetPreference &
               (AndOrSETCCFoldKind::AddAnd | AndOrSETCCFoldKind::NotAnd)) {

      // AndOrSETCCFoldKind::AddAnd:
      // A == C0 | A == C1
      //  IF IsPow2(smax(C0, C1)-smin(C0, C1))
      //    -> ((A - smin(C0, C1)) & ~(smax(C0, C1)-smin(C0, C1))) == 0
      // A != C0 & A != C1
      //  IF IsPow2(smax(C0, C1)-smin(C0, C1))
      //    -> ((A - smin(C0, C1)) & ~(smax(C0, C1)-smin(C0, C1))) != 0

      // AndOrSETCCFoldKind::NotAnd:
      // A == C0 | A == C1
      //  IF smax(C0, C1) == -1 AND IsPow2(smax(C0, C1) - smin(C0, C1))
      //    -> ~A & smin(C0, C1) == 0
      // A != C0 & A != C1
      //  IF smax(C0, C1) == -1 AND IsPow2(smax(C0, C1) - smin(C0, C1))
      //    -> ~A & smin(C0, C1) != 0

      const APInt &MaxC = APIntOps::smax(APRhs, APLhs);
      const APInt &MinC = APIntOps::smin(APRhs, APLhs);
      APInt Dif = MaxC - MinC;
      if (!Dif.isZero() && Dif.isPowerOf2()) {
        if (MaxC.isAllOnes() &&
            (TargetPreference & AndOrSETCCFoldKind::NotAnd)) {
          SDValue NotOp = DAG.getNOT(DL, LHS0, OpVT);
          SDValue AndOp = DAG.getNode(ISD::AND, DL, OpVT, NotOp,
                                      DAG.getConstant(MinC, DL, OpVT));
          return DAG.getNode(ISD::SETCC, DL, VT, AndOp,
                             DAG.getConstant(0, DL, OpVT), LHS.getOperand(2));
        } else if (TargetPreference & AndOrSETCCFoldKind::AddAnd) {

          SDValue AddOp = DAG.getNode(ISD::ADD, DL, OpVT, LHS0,
                                      DAG.getConstant(-MinC, DL, OpVT));
          SDValue AndOp = DAG.getNode(ISD::AND, DL, OpVT, AddOp,
                                      DAG.getConstant(~Dif, DL, OpVT));
          return DAG.getNode(ISD::SETCC, DL, VT, AndOp,
                             DAG.getConstant(0, DL, OpVT), LHS.getOperand(2));
        }
      }
    }
  }

  return SDValue();
}

// Combine `(select c, (X & 1), 0)` -> `(and (zext c), X)`.
// We canonicalize to the `select` form in the middle end, but the `and` form
// gets better codegen and all tested targets (arm, x86, riscv)
static SDValue combineSelectAsExtAnd(SDValue Cond, SDValue T, SDValue F,
                                     const SDLoc &DL, SelectionDAG &DAG) {
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  if (!isNullConstant(F))
    return SDValue();

  EVT CondVT = Cond.getValueType();
  if (TLI.getBooleanContents(CondVT) !=
      TargetLoweringBase::ZeroOrOneBooleanContent)
    return SDValue();

  if (T.getOpcode() != ISD::AND)
    return SDValue();

  if (!isOneConstant(T.getOperand(1)))
    return SDValue();

  EVT OpVT = T.getValueType();

  SDValue CondMask =
      OpVT == CondVT ? Cond : DAG.getBoolExtOrTrunc(Cond, DL, OpVT, CondVT);
  return DAG.getNode(ISD::AND, DL, OpVT, CondMask, T.getOperand(0));
}

/// This contains all DAGCombine rules which reduce two values combined by
/// an And operation to a single value. This makes them reusable in the context
/// of visitSELECT(). Rules involving constants are not included as
/// visitSELECT() already handles those cases.
SDValue DAGCombiner::visitANDLike(SDValue N0, SDValue N1, SDNode *N) {
  EVT VT = N1.getValueType();
  SDLoc DL(N);

  // fold (and x, undef) -> 0
  if (N0.isUndef() || N1.isUndef())
    return DAG.getConstant(0, DL, VT);

  if (SDValue V = foldLogicOfSetCCs(true, N0, N1, DL))
    return V;

  // Canonicalize:
  //   and(x, add) -> and(add, x)
  if (N1.getOpcode() == ISD::ADD)
    std::swap(N0, N1);

  // TODO: Rewrite this to return a new 'AND' instead of using CombineTo.
  if (N0.getOpcode() == ISD::ADD && N1.getOpcode() == ISD::SRL &&
      VT.isScalarInteger() && VT.getSizeInBits() <= 64 && N0->hasOneUse()) {
    if (ConstantSDNode *ADDI = dyn_cast<ConstantSDNode>(N0.getOperand(1))) {
      if (ConstantSDNode *SRLI = dyn_cast<ConstantSDNode>(N1.getOperand(1))) {
        // Look for (and (add x, c1), (lshr y, c2)). If C1 wasn't a legal
        // immediate for an add, but it is legal if its top c2 bits are set,
        // transform the ADD so the immediate doesn't need to be materialized
        // in a register.
        APInt ADDC = ADDI->getAPIntValue();
        APInt SRLC = SRLI->getAPIntValue();
        if (ADDC.getSignificantBits() <= 64 && SRLC.ult(VT.getSizeInBits()) &&
            !TLI.isLegalAddImmediate(ADDC.getSExtValue())) {
          APInt Mask = APInt::getHighBitsSet(VT.getSizeInBits(),
                                             SRLC.getZExtValue());
          if (DAG.MaskedValueIsZero(N0.getOperand(1), Mask)) {
            ADDC |= Mask;
            if (TLI.isLegalAddImmediate(ADDC.getSExtValue())) {
              SDLoc DL0(N0);
              SDValue NewAdd =
                DAG.getNode(ISD::ADD, DL0, VT,
                            N0.getOperand(0), DAG.getConstant(ADDC, DL, VT));
              CombineTo(N0.getNode(), NewAdd);
              // Return N so it doesn't get rechecked!
              return SDValue(N, 0);
            }
          }
        }
      }
    }
  }

  return SDValue();
}

bool DAGCombiner::isAndLoadExtLoad(ConstantSDNode *AndC, LoadSDNode *LoadN,
                                   EVT LoadResultTy, EVT &ExtVT) {
  if (!AndC->getAPIntValue().isMask())
    return false;

  unsigned ActiveBits = AndC->getAPIntValue().countr_one();

  ExtVT = EVT::getIntegerVT(*DAG.getContext(), ActiveBits);
  EVT LoadedVT = LoadN->getMemoryVT();

  if (ExtVT == LoadedVT &&
      (!LegalOperations ||
       TLI.isLoadExtLegal(ISD::ZEXTLOAD, LoadResultTy, ExtVT))) {
    // ZEXTLOAD will match without needing to change the size of the value being
    // loaded.
    return true;
  }

  // Do not change the width of a volatile or atomic loads.
  if (!LoadN->isSimple())
    return false;

  // Do not generate loads of non-round integer types since these can
  // be expensive (and would be wrong if the type is not byte sized).
  if (!LoadedVT.bitsGT(ExtVT) || !ExtVT.isRound())
    return false;

  if (LegalOperations &&
      !TLI.isLoadExtLegal(ISD::ZEXTLOAD, LoadResultTy, ExtVT))
    return false;

  if (!TLI.shouldReduceLoadWidth(LoadN, ISD::ZEXTLOAD, ExtVT))
    return false;

  return true;
}

bool DAGCombiner::isLegalNarrowLdSt(LSBaseSDNode *LDST,
                                    ISD::LoadExtType ExtType, EVT &MemVT,
                                    unsigned ShAmt) {
  if (!LDST)
    return false;
  // Only allow byte offsets.
  if (ShAmt % 8)
    return false;

  // Do not generate loads of non-round integer types since these can
  // be expensive (and would be wrong if the type is not byte sized).
  if (!MemVT.isRound())
    return false;

  // Don't change the width of a volatile or atomic loads.
  if (!LDST->isSimple())
    return false;

  EVT LdStMemVT = LDST->getMemoryVT();

  // Bail out when changing the scalable property, since we can't be sure that
  // we're actually narrowing here.
  if (LdStMemVT.isScalableVector() != MemVT.isScalableVector())
    return false;

  // Verify that we are actually reducing a load width here.
  if (LdStMemVT.bitsLT(MemVT))
    return false;

  // Ensure that this isn't going to produce an unsupported memory access.
  if (ShAmt) {
    assert(ShAmt % 8 == 0 && "ShAmt is byte offset");
    const unsigned ByteShAmt = ShAmt / 8;
    const Align LDSTAlign = LDST->getAlign();
    const Align NarrowAlign = commonAlignment(LDSTAlign, ByteShAmt);
    if (!TLI.allowsMemoryAccess(*DAG.getContext(), DAG.getDataLayout(), MemVT,
                                LDST->getAddressSpace(), NarrowAlign,
                                LDST->getMemOperand()->getFlags()))
      return false;
  }

  // It's not possible to generate a constant of extended or untyped type.
  EVT PtrType = LDST->getBasePtr().getValueType();
  if (PtrType == MVT::Untyped || PtrType.isExtended())
    return false;

  if (isa<LoadSDNode>(LDST)) {
    LoadSDNode *Load = cast<LoadSDNode>(LDST);
    // Don't transform one with multiple uses, this would require adding a new
    // load.
    if (!SDValue(Load, 0).hasOneUse())
      return false;

    if (LegalOperations &&
        !TLI.isLoadExtLegal(ExtType, Load->getValueType(0), MemVT))
      return false;

    // For the transform to be legal, the load must produce only two values
    // (the value loaded and the chain).  Don't transform a pre-increment
    // load, for example, which produces an extra value.  Otherwise the
    // transformation is not equivalent, and the downstream logic to replace
    // uses gets things wrong.
    if (Load->getNumValues() > 2)
      return false;

    // If the load that we're shrinking is an extload and we're not just
    // discarding the extension we can't simply shrink the load. Bail.
    // TODO: It would be possible to merge the extensions in some cases.
    if (Load->getExtensionType() != ISD::NON_EXTLOAD &&
        Load->getMemoryVT().getSizeInBits() < MemVT.getSizeInBits() + ShAmt)
      return false;

    if (!TLI.shouldReduceLoadWidth(Load, ExtType, MemVT))
      return false;
  } else {
    assert(isa<StoreSDNode>(LDST) && "It is not a Load nor a Store SDNode");
    StoreSDNode *Store = cast<StoreSDNode>(LDST);
    // Can't write outside the original store
    if (Store->getMemoryVT().getSizeInBits() < MemVT.getSizeInBits() + ShAmt)
      return false;

    if (LegalOperations &&
        !TLI.isTruncStoreLegal(Store->getValue().getValueType(), MemVT))
      return false;
  }
  return true;
}

bool DAGCombiner::SearchForAndLoads(SDNode *N,
                                    SmallVectorImpl<LoadSDNode*> &Loads,
                                    SmallPtrSetImpl<SDNode*> &NodesWithConsts,
                                    ConstantSDNode *Mask,
                                    SDNode *&NodeToMask) {
  // Recursively search for the operands, looking for loads which can be
  // narrowed.
  for (SDValue Op : N->op_values()) {
    if (Op.getValueType().isVector())
      return false;

    // Some constants may need fixing up later if they are too large.
    if (auto *C = dyn_cast<ConstantSDNode>(Op)) {
      if ((N->getOpcode() == ISD::OR || N->getOpcode() == ISD::XOR) &&
          (Mask->getAPIntValue() & C->getAPIntValue()) != C->getAPIntValue())
        NodesWithConsts.insert(N);
      continue;
    }

    if (!Op.hasOneUse())
      return false;

    switch(Op.getOpcode()) {
    case ISD::LOAD: {
      auto *Load = cast<LoadSDNode>(Op);
      EVT ExtVT;
      if (isAndLoadExtLoad(Mask, Load, Load->getValueType(0), ExtVT) &&
          isLegalNarrowLdSt(Load, ISD::ZEXTLOAD, ExtVT)) {

        // ZEXTLOAD is already small enough.
        if (Load->getExtensionType() == ISD::ZEXTLOAD &&
            ExtVT.bitsGE(Load->getMemoryVT()))
          continue;

        // Use LE to convert equal sized loads to zext.
        if (ExtVT.bitsLE(Load->getMemoryVT()))
          Loads.push_back(Load);

        continue;
      }
      return false;
    }
    case ISD::ZERO_EXTEND:
    case ISD::AssertZext: {
      unsigned ActiveBits = Mask->getAPIntValue().countr_one();
      EVT ExtVT = EVT::getIntegerVT(*DAG.getContext(), ActiveBits);
      EVT VT = Op.getOpcode() == ISD::AssertZext ?
        cast<VTSDNode>(Op.getOperand(1))->getVT() :
        Op.getOperand(0).getValueType();

      // We can accept extending nodes if the mask is wider or an equal
      // width to the original type.
      if (ExtVT.bitsGE(VT))
        continue;
      break;
    }
    case ISD::OR:
    case ISD::XOR:
    case ISD::AND:
      if (!SearchForAndLoads(Op.getNode(), Loads, NodesWithConsts, Mask,
                             NodeToMask))
        return false;
      continue;
    }

    // Allow one node which will masked along with any loads found.
    if (NodeToMask)
      return false;

    // Also ensure that the node to be masked only produces one data result.
    NodeToMask = Op.getNode();
    if (NodeToMask->getNumValues() > 1) {
      bool HasValue = false;
      for (unsigned i = 0, e = NodeToMask->getNumValues(); i < e; ++i) {
        MVT VT = SDValue(NodeToMask, i).getSimpleValueType();
        if (VT != MVT::Glue && VT != MVT::Other) {
          if (HasValue) {
            NodeToMask = nullptr;
            return false;
          }
          HasValue = true;
        }
      }
      assert(HasValue && "Node to be masked has no data result?");
    }
  }
  return true;
}

bool DAGCombiner::BackwardsPropagateMask(SDNode *N) {
  auto *Mask = dyn_cast<ConstantSDNode>(N->getOperand(1));
  if (!Mask)
    return false;

  if (!Mask->getAPIntValue().isMask())
    return false;

  // No need to do anything if the and directly uses a load.
  if (isa<LoadSDNode>(N->getOperand(0)))
    return false;

  SmallVector<LoadSDNode*, 8> Loads;
  SmallPtrSet<SDNode*, 2> NodesWithConsts;
  SDNode *FixupNode = nullptr;
  if (SearchForAndLoads(N, Loads, NodesWithConsts, Mask, FixupNode)) {
    if (Loads.empty())
      return false;

    LLVM_DEBUG(dbgs() << "Backwards propagate AND: "; N->dump());
    SDValue MaskOp = N->getOperand(1);

    // If it exists, fixup the single node we allow in the tree that needs
    // masking.
    if (FixupNode) {
      LLVM_DEBUG(dbgs() << "First, need to fix up: "; FixupNode->dump());
      SDValue And = DAG.getNode(ISD::AND, SDLoc(FixupNode),
                                FixupNode->getValueType(0),
                                SDValue(FixupNode, 0), MaskOp);
      DAG.ReplaceAllUsesOfValueWith(SDValue(FixupNode, 0), And);
      if (And.getOpcode() == ISD ::AND)
        DAG.UpdateNodeOperands(And.getNode(), SDValue(FixupNode, 0), MaskOp);
    }

    // Narrow any constants that need it.
    for (auto *LogicN : NodesWithConsts) {
      SDValue Op0 = LogicN->getOperand(0);
      SDValue Op1 = LogicN->getOperand(1);

      if (isa<ConstantSDNode>(Op0))
        Op0 =
            DAG.getNode(ISD::AND, SDLoc(Op0), Op0.getValueType(), Op0, MaskOp);

      if (isa<ConstantSDNode>(Op1))
        Op1 =
            DAG.getNode(ISD::AND, SDLoc(Op1), Op1.getValueType(), Op1, MaskOp);

      if (isa<ConstantSDNode>(Op0) && !isa<ConstantSDNode>(Op1))
        std::swap(Op0, Op1);

      DAG.UpdateNodeOperands(LogicN, Op0, Op1);
    }

    // Create narrow loads.
    for (auto *Load : Loads) {
      LLVM_DEBUG(dbgs() << "Propagate AND back to: "; Load->dump());
      SDValue And = DAG.getNode(ISD::AND, SDLoc(Load), Load->getValueType(0),
                                SDValue(Load, 0), MaskOp);
      DAG.ReplaceAllUsesOfValueWith(SDValue(Load, 0), And);
      if (And.getOpcode() == ISD ::AND)
        And = SDValue(
            DAG.UpdateNodeOperands(And.getNode(), SDValue(Load, 0), MaskOp), 0);
      SDValue NewLoad = reduceLoadWidth(And.getNode());
      assert(NewLoad &&
             "Shouldn't be masking the load if it can't be narrowed");
      CombineTo(Load, NewLoad, NewLoad.getValue(1));
    }
    DAG.ReplaceAllUsesWith(N, N->getOperand(0).getNode());
    return true;
  }
  return false;
}

// Unfold
//    x &  (-1 'logical shift' y)
// To
//    (x 'opposite logical shift' y) 'logical shift' y
// if it is better for performance.
SDValue DAGCombiner::unfoldExtremeBitClearingToShifts(SDNode *N) {
  assert(N->getOpcode() == ISD::AND);

  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);

  // Do we actually prefer shifts over mask?
  if (!TLI.shouldFoldMaskToVariableShiftPair(N0))
    return SDValue();

  // Try to match  (-1 '[outer] logical shift' y)
  unsigned OuterShift;
  unsigned InnerShift; // The opposite direction to the OuterShift.
  SDValue Y;           // Shift amount.
  auto matchMask = [&OuterShift, &InnerShift, &Y](SDValue M) -> bool {
    if (!M.hasOneUse())
      return false;
    OuterShift = M->getOpcode();
    if (OuterShift == ISD::SHL)
      InnerShift = ISD::SRL;
    else if (OuterShift == ISD::SRL)
      InnerShift = ISD::SHL;
    else
      return false;
    if (!isAllOnesConstant(M->getOperand(0)))
      return false;
    Y = M->getOperand(1);
    return true;
  };

  SDValue X;
  if (matchMask(N1))
    X = N0;
  else if (matchMask(N0))
    X = N1;
  else
    return SDValue();

  SDLoc DL(N);
  EVT VT = N->getValueType(0);

  //     tmp = x   'opposite logical shift' y
  SDValue T0 = DAG.getNode(InnerShift, DL, VT, X, Y);
  //     ret = tmp 'logical shift' y
  SDValue T1 = DAG.getNode(OuterShift, DL, VT, T0, Y);

  return T1;
}

/// Try to replace shift/logic that tests if a bit is clear with mask + setcc.
/// For a target with a bit test, this is expected to become test + set and save
/// at least 1 instruction.
static SDValue combineShiftAnd1ToBitTest(SDNode *And, SelectionDAG &DAG) {
  assert(And->getOpcode() == ISD::AND && "Expected an 'and' op");

  // Look through an optional extension.
  SDValue And0 = And->getOperand(0), And1 = And->getOperand(1);
  if (And0.getOpcode() == ISD::ANY_EXTEND && And0.hasOneUse())
    And0 = And0.getOperand(0);
  if (!isOneConstant(And1) || !And0.hasOneUse())
    return SDValue();

  SDValue Src = And0;

  // Attempt to find a 'not' op.
  // TODO: Should we favor test+set even without the 'not' op?
  bool FoundNot = false;
  if (isBitwiseNot(Src)) {
    FoundNot = true;
    Src = Src.getOperand(0);

    // Look though an optional truncation. The source operand may not be the
    // same type as the original 'and', but that is ok because we are masking
    // off everything but the low bit.
    if (Src.getOpcode() == ISD::TRUNCATE && Src.hasOneUse())
      Src = Src.getOperand(0);
  }

  // Match a shift-right by constant.
  if (Src.getOpcode() != ISD::SRL || !Src.hasOneUse())
    return SDValue();

  // This is probably not worthwhile without a supported type.
  EVT SrcVT = Src.getValueType();
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  if (!TLI.isTypeLegal(SrcVT))
    return SDValue();

  // We might have looked through casts that make this transform invalid.
  unsigned BitWidth = SrcVT.getScalarSizeInBits();
  SDValue ShiftAmt = Src.getOperand(1);
  auto *ShiftAmtC = dyn_cast<ConstantSDNode>(ShiftAmt);
  if (!ShiftAmtC || !ShiftAmtC->getAPIntValue().ult(BitWidth))
    return SDValue();

  // Set source to shift source.
  Src = Src.getOperand(0);

  // Try again to find a 'not' op.
  // TODO: Should we favor test+set even with two 'not' ops?
  if (!FoundNot) {
    if (!isBitwiseNot(Src))
      return SDValue();
    Src = Src.getOperand(0);
  }

  if (!TLI.hasBitTest(Src, ShiftAmt))
    return SDValue();

  // Turn this into a bit-test pattern using mask op + setcc:
  // and (not (srl X, C)), 1 --> (and X, 1<<C) == 0
  // and (srl (not X), C)), 1 --> (and X, 1<<C) == 0
  SDLoc DL(And);
  SDValue X = DAG.getZExtOrTrunc(Src, DL, SrcVT);
  EVT CCVT =
      TLI.getSetCCResultType(DAG.getDataLayout(), *DAG.getContext(), SrcVT);
  SDValue Mask = DAG.getConstant(
      APInt::getOneBitSet(BitWidth, ShiftAmtC->getZExtValue()), DL, SrcVT);
  SDValue NewAnd = DAG.getNode(ISD::AND, DL, SrcVT, X, Mask);
  SDValue Zero = DAG.getConstant(0, DL, SrcVT);
  SDValue Setcc = DAG.getSetCC(DL, CCVT, NewAnd, Zero, ISD::SETEQ);
  return DAG.getZExtOrTrunc(Setcc, DL, And->getValueType(0));
}

/// For targets that support usubsat, match a bit-hack form of that operation
/// that ends in 'and' and convert it.
static SDValue foldAndToUsubsat(SDNode *N, SelectionDAG &DAG, const SDLoc &DL) {
  EVT VT = N->getValueType(0);
  unsigned BitWidth = VT.getScalarSizeInBits();
  APInt SignMask = APInt::getSignMask(BitWidth);

  // (i8 X ^ 128) & (i8 X s>> 7) --> usubsat X, 128
  // (i8 X + 128) & (i8 X s>> 7) --> usubsat X, 128
  // xor/add with SMIN (signmask) are logically equivalent.
  SDValue X;
  if (!sd_match(N, m_And(m_OneUse(m_Xor(m_Value(X), m_SpecificInt(SignMask))),
                         m_OneUse(m_Sra(m_Deferred(X),
                                        m_SpecificInt(BitWidth - 1))))) &&
      !sd_match(N, m_And(m_OneUse(m_Add(m_Value(X), m_SpecificInt(SignMask))),
                         m_OneUse(m_Sra(m_Deferred(X),
                                        m_SpecificInt(BitWidth - 1))))))
    return SDValue();

  return DAG.getNode(ISD::USUBSAT, DL, VT, X,
                     DAG.getConstant(SignMask, DL, VT));
}

/// Given a bitwise logic operation N with a matching bitwise logic operand,
/// fold a pattern where 2 of the source operands are identically shifted
/// values. For example:
/// ((X0 << Y) | Z) | (X1 << Y) --> ((X0 | X1) << Y) | Z
static SDValue foldLogicOfShifts(SDNode *N, SDValue LogicOp, SDValue ShiftOp,
                                 SelectionDAG &DAG) {
  unsigned LogicOpcode = N->getOpcode();
  assert(ISD::isBitwiseLogicOp(LogicOpcode) &&
         "Expected bitwise logic operation");

  if (!LogicOp.hasOneUse() || !ShiftOp.hasOneUse())
    return SDValue();

  // Match another bitwise logic op and a shift.
  unsigned ShiftOpcode = ShiftOp.getOpcode();
  if (LogicOp.getOpcode() != LogicOpcode ||
      !(ShiftOpcode == ISD::SHL || ShiftOpcode == ISD::SRL ||
        ShiftOpcode == ISD::SRA))
    return SDValue();

  // Match another shift op inside the first logic operand. Handle both commuted
  // possibilities.
  // LOGIC (LOGIC (SH X0, Y), Z), (SH X1, Y) --> LOGIC (SH (LOGIC X0, X1), Y), Z
  // LOGIC (LOGIC Z, (SH X0, Y)), (SH X1, Y) --> LOGIC (SH (LOGIC X0, X1), Y), Z
  SDValue X1 = ShiftOp.getOperand(0);
  SDValue Y = ShiftOp.getOperand(1);
  SDValue X0, Z;
  if (LogicOp.getOperand(0).getOpcode() == ShiftOpcode &&
      LogicOp.getOperand(0).getOperand(1) == Y) {
    X0 = LogicOp.getOperand(0).getOperand(0);
    Z = LogicOp.getOperand(1);
  } else if (LogicOp.getOperand(1).getOpcode() == ShiftOpcode &&
             LogicOp.getOperand(1).getOperand(1) == Y) {
    X0 = LogicOp.getOperand(1).getOperand(0);
    Z = LogicOp.getOperand(0);
  } else {
    return SDValue();
  }

  EVT VT = N->getValueType(0);
  SDLoc DL(N);
  SDValue LogicX = DAG.getNode(LogicOpcode, DL, VT, X0, X1);
  SDValue NewShift = DAG.getNode(ShiftOpcode, DL, VT, LogicX, Y);
  return DAG.getNode(LogicOpcode, DL, VT, NewShift, Z);
}

/// Given a tree of logic operations with shape like
/// (LOGIC (LOGIC (X, Y), LOGIC (Z, Y)))
/// try to match and fold shift operations with the same shift amount.
/// For example:
/// LOGIC (LOGIC (SH X0, Y), Z), (LOGIC (SH X1, Y), W) -->
/// --> LOGIC (SH (LOGIC X0, X1), Y), (LOGIC Z, W)
static SDValue foldLogicTreeOfShifts(SDNode *N, SDValue LeftHand,
                                     SDValue RightHand, SelectionDAG &DAG) {
  unsigned LogicOpcode = N->getOpcode();
  assert(ISD::isBitwiseLogicOp(LogicOpcode) &&
         "Expected bitwise logic operation");
  if (LeftHand.getOpcode() != LogicOpcode ||
      RightHand.getOpcode() != LogicOpcode)
    return SDValue();
  if (!LeftHand.hasOneUse() || !RightHand.hasOneUse())
    return SDValue();

  // Try to match one of following patterns:
  // LOGIC (LOGIC (SH X0, Y), Z), (LOGIC (SH X1, Y), W)
  // LOGIC (LOGIC (SH X0, Y), Z), (LOGIC W, (SH X1, Y))
  // Note that foldLogicOfShifts will handle commuted versions of the left hand
  // itself.
  SDValue CombinedShifts, W;
  SDValue R0 = RightHand.getOperand(0);
  SDValue R1 = RightHand.getOperand(1);
  if ((CombinedShifts = foldLogicOfShifts(N, LeftHand, R0, DAG)))
    W = R1;
  else if ((CombinedShifts = foldLogicOfShifts(N, LeftHand, R1, DAG)))
    W = R0;
  else
    return SDValue();

  EVT VT = N->getValueType(0);
  SDLoc DL(N);
  return DAG.getNode(LogicOpcode, DL, VT, CombinedShifts, W);
}

SDValue DAGCombiner::visitAND(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N1.getValueType();
  SDLoc DL(N);

  // x & x --> x
  if (N0 == N1)
    return N0;

  // fold (and c1, c2) -> c1&c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::AND, DL, VT, {N0, N1}))
    return C;

  // canonicalize constant to RHS
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
      !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return DAG.getNode(ISD::AND, DL, VT, N1, N0);

  if (areBitwiseNotOfEachother(N0, N1))
    return DAG.getConstant(APInt::getZero(VT.getScalarSizeInBits()), DL, VT);

  // fold vector ops
  if (VT.isVector()) {
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

    // fold (and x, 0) -> 0, vector edition
    if (ISD::isConstantSplatVectorAllZeros(N1.getNode()))
      // do not return N1, because undef node may exist in N1
      return DAG.getConstant(APInt::getZero(N1.getScalarValueSizeInBits()), DL,
                             N1.getValueType());

    // fold (and x, -1) -> x, vector edition
    if (ISD::isConstantSplatVectorAllOnes(N1.getNode()))
      return N0;

    // fold (and (masked_load) (splat_vec (x, ...))) to zext_masked_load
    auto *MLoad = dyn_cast<MaskedLoadSDNode>(N0);
    ConstantSDNode *Splat = isConstOrConstSplat(N1, true, true);
    if (MLoad && MLoad->getExtensionType() == ISD::EXTLOAD && Splat) {
      EVT LoadVT = MLoad->getMemoryVT();
      EVT ExtVT = VT;
      if (TLI.isLoadExtLegal(ISD::ZEXTLOAD, ExtVT, LoadVT)) {
        // For this AND to be a zero extension of the masked load the elements
        // of the BuildVec must mask the bottom bits of the extended element
        // type
        uint64_t ElementSize =
            LoadVT.getVectorElementType().getScalarSizeInBits();
        if (Splat->getAPIntValue().isMask(ElementSize)) {
          SDValue NewLoad = DAG.getMaskedLoad(
              ExtVT, DL, MLoad->getChain(), MLoad->getBasePtr(),
              MLoad->getOffset(), MLoad->getMask(), MLoad->getPassThru(),
              LoadVT, MLoad->getMemOperand(), MLoad->getAddressingMode(),
              ISD::ZEXTLOAD, MLoad->isExpandingLoad());
          bool LoadHasOtherUsers = !N0.hasOneUse();
          CombineTo(N, NewLoad);
          if (LoadHasOtherUsers)
            CombineTo(MLoad, NewLoad.getValue(0), NewLoad.getValue(1));
          return SDValue(N, 0);
        }
      }
    }
  }

  // fold (and x, -1) -> x
  if (isAllOnesConstant(N1))
    return N0;

  // if (and x, c) is known to be zero, return 0
  unsigned BitWidth = VT.getScalarSizeInBits();
  ConstantSDNode *N1C = isConstOrConstSplat(N1);
  if (N1C && DAG.MaskedValueIsZero(SDValue(N, 0), APInt::getAllOnes(BitWidth)))
    return DAG.getConstant(0, DL, VT);

  if (SDValue R = foldAndOrOfSETCC(N, DAG))
    return R;

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  // reassociate and
  if (SDValue RAND = reassociateOps(ISD::AND, DL, N0, N1, N->getFlags()))
    return RAND;

  // Fold and(vecreduce(x), vecreduce(y)) -> vecreduce(and(x, y))
  if (SDValue SD =
          reassociateReduction(ISD::VECREDUCE_AND, ISD::AND, DL, VT, N0, N1))
    return SD;

  // fold (and (or x, C), D) -> D if (C & D) == D
  auto MatchSubset = [](ConstantSDNode *LHS, ConstantSDNode *RHS) {
    return RHS->getAPIntValue().isSubsetOf(LHS->getAPIntValue());
  };
  if (N0.getOpcode() == ISD::OR &&
      ISD::matchBinaryPredicate(N0.getOperand(1), N1, MatchSubset))
    return N1;

  if (N1C && N0.getOpcode() == ISD::ANY_EXTEND) {
    SDValue N0Op0 = N0.getOperand(0);
    EVT SrcVT = N0Op0.getValueType();
    unsigned SrcBitWidth = SrcVT.getScalarSizeInBits();
    APInt Mask = ~N1C->getAPIntValue();
    Mask = Mask.trunc(SrcBitWidth);

    // fold (and (any_ext V), c) -> (zero_ext V) if 'and' only clears top bits.
    if (DAG.MaskedValueIsZero(N0Op0, Mask))
      return DAG.getNode(ISD::ZERO_EXTEND, DL, VT, N0Op0);

    // fold (and (any_ext V), c) -> (zero_ext (and (trunc V), c)) if profitable.
    if (N1C->getAPIntValue().countLeadingZeros() >= (BitWidth - SrcBitWidth) &&
        TLI.isTruncateFree(VT, SrcVT) && TLI.isZExtFree(SrcVT, VT) &&
        TLI.isTypeDesirableForOp(ISD::AND, SrcVT) &&
        TLI.isNarrowingProfitable(N, VT, SrcVT))
      return DAG.getNode(ISD::ZERO_EXTEND, DL, VT,
                         DAG.getNode(ISD::AND, DL, SrcVT, N0Op0,
                                     DAG.getZExtOrTrunc(N1, DL, SrcVT)));
  }

  // fold (and (ext (and V, c1)), c2) -> (and (ext V), (and c1, (ext c2)))
  if (ISD::isExtOpcode(N0.getOpcode())) {
    unsigned ExtOpc = N0.getOpcode();
    SDValue N0Op0 = N0.getOperand(0);
    if (N0Op0.getOpcode() == ISD::AND &&
        (ExtOpc != ISD::ZERO_EXTEND || !TLI.isZExtFree(N0Op0, VT)) &&
        N0->hasOneUse() && N0Op0->hasOneUse()) {
      if (SDValue NewExt = DAG.FoldConstantArithmetic(ExtOpc, DL, VT,
                                                      {N0Op0.getOperand(1)})) {
        if (SDValue NewMask =
                DAG.FoldConstantArithmetic(ISD::AND, DL, VT, {N1, NewExt})) {
          return DAG.getNode(ISD::AND, DL, VT,
                             DAG.getNode(ExtOpc, DL, VT, N0Op0.getOperand(0)),
                             NewMask);
        }
      }
    }
  }

  // similarly fold (and (X (load ([non_ext|any_ext|zero_ext] V))), c) ->
  // (X (load ([non_ext|zero_ext] V))) if 'and' only clears top bits which must
  // already be zero by virtue of the width of the base type of the load.
  //
  // the 'X' node here can either be nothing or an extract_vector_elt to catch
  // more cases.
  if ((N0.getOpcode() == ISD::EXTRACT_VECTOR_ELT &&
       N0.getValueSizeInBits() == N0.getOperand(0).getScalarValueSizeInBits() &&
       N0.getOperand(0).getOpcode() == ISD::LOAD &&
       N0.getOperand(0).getResNo() == 0) ||
      (N0.getOpcode() == ISD::LOAD && N0.getResNo() == 0)) {
    auto *Load =
        cast<LoadSDNode>((N0.getOpcode() == ISD::LOAD) ? N0 : N0.getOperand(0));

    // Get the constant (if applicable) the zero'th operand is being ANDed with.
    // This can be a pure constant or a vector splat, in which case we treat the
    // vector as a scalar and use the splat value.
    APInt Constant = APInt::getZero(1);
    if (const ConstantSDNode *C = isConstOrConstSplat(
            N1, /*AllowUndef=*/false, /*AllowTruncation=*/true)) {
      Constant = C->getAPIntValue();
    } else if (BuildVectorSDNode *Vector = dyn_cast<BuildVectorSDNode>(N1)) {
      unsigned EltBitWidth = Vector->getValueType(0).getScalarSizeInBits();
      APInt SplatValue, SplatUndef;
      unsigned SplatBitSize;
      bool HasAnyUndefs;
      // Endianness should not matter here. Code below makes sure that we only
      // use the result if the SplatBitSize is a multiple of the vector element
      // size. And after that we AND all element sized parts of the splat
      // together. So the end result should be the same regardless of in which
      // order we do those operations.
      const bool IsBigEndian = false;
      bool IsSplat =
          Vector->isConstantSplat(SplatValue, SplatUndef, SplatBitSize,
                                  HasAnyUndefs, EltBitWidth, IsBigEndian);

      // Make sure that variable 'Constant' is only set if 'SplatBitSize' is a
      // multiple of 'BitWidth'. Otherwise, we could propagate a wrong value.
      if (IsSplat && (SplatBitSize % EltBitWidth) == 0) {
        // Undef bits can contribute to a possible optimisation if set, so
        // set them.
        SplatValue |= SplatUndef;

        // The splat value may be something like "0x00FFFFFF", which means 0 for
        // the first vector value and FF for the rest, repeating. We need a mask
        // that will apply equally to all members of the vector, so AND all the
        // lanes of the constant together.
        Constant = APInt::getAllOnes(EltBitWidth);
        for (unsigned i = 0, n = (SplatBitSize / EltBitWidth); i < n; ++i)
          Constant &= SplatValue.extractBits(EltBitWidth, i * EltBitWidth);
      }
    }

    // If we want to change an EXTLOAD to a ZEXTLOAD, ensure a ZEXTLOAD is
    // actually legal and isn't going to get expanded, else this is a false
    // optimisation.
    bool CanZextLoadProfitably = TLI.isLoadExtLegal(ISD::ZEXTLOAD,
                                                    Load->getValueType(0),
                                                    Load->getMemoryVT());

    // Resize the constant to the same size as the original memory access before
    // extension. If it is still the AllOnesValue then this AND is completely
    // unneeded.
    Constant = Constant.zextOrTrunc(Load->getMemoryVT().getScalarSizeInBits());

    bool B;
    switch (Load->getExtensionType()) {
    default: B = false; break;
    case ISD::EXTLOAD: B = CanZextLoadProfitably; break;
    case ISD::ZEXTLOAD:
    case ISD::NON_EXTLOAD: B = true; break;
    }

    if (B && Constant.isAllOnes()) {
      // If the load type was an EXTLOAD, convert to ZEXTLOAD in order to
      // preserve semantics once we get rid of the AND.
      SDValue NewLoad(Load, 0);

      // Fold the AND away. NewLoad may get replaced immediately.
      CombineTo(N, (N0.getNode() == Load) ? NewLoad : N0);

      if (Load->getExtensionType() == ISD::EXTLOAD) {
        NewLoad = DAG.getLoad(Load->getAddressingMode(), ISD::ZEXTLOAD,
                              Load->getValueType(0), SDLoc(Load),
                              Load->getChain(), Load->getBasePtr(),
                              Load->getOffset(), Load->getMemoryVT(),
                              Load->getMemOperand());
        // Replace uses of the EXTLOAD with the new ZEXTLOAD.
        if (Load->getNumValues() == 3) {
          // PRE/POST_INC loads have 3 values.
          SDValue To[] = { NewLoad.getValue(0), NewLoad.getValue(1),
                           NewLoad.getValue(2) };
          CombineTo(Load, To, 3, true);
        } else {
          CombineTo(Load, NewLoad.getValue(0), NewLoad.getValue(1));
        }
      }

      return SDValue(N, 0); // Return N so it doesn't get rechecked!
    }
  }

  // Try to convert a constant mask AND into a shuffle clear mask.
  if (VT.isVector())
    if (SDValue Shuffle = XformToShuffleWithZero(N))
      return Shuffle;

  if (SDValue Combined = combineCarryDiamond(DAG, TLI, N0, N1, N))
    return Combined;

  if (N0.getOpcode() == ISD::EXTRACT_SUBVECTOR && N0.hasOneUse() && N1C &&
      ISD::isExtOpcode(N0.getOperand(0).getOpcode())) {
    SDValue Ext = N0.getOperand(0);
    EVT ExtVT = Ext->getValueType(0);
    SDValue Extendee = Ext->getOperand(0);

    unsigned ScalarWidth = Extendee.getValueType().getScalarSizeInBits();
    if (N1C->getAPIntValue().isMask(ScalarWidth) &&
        (!LegalOperations || TLI.isOperationLegal(ISD::ZERO_EXTEND, ExtVT))) {
      //    (and (extract_subvector (zext|anyext|sext v) _) iN_mask)
      // => (extract_subvector (iN_zeroext v))
      SDValue ZeroExtExtendee =
          DAG.getNode(ISD::ZERO_EXTEND, DL, ExtVT, Extendee);

      return DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, VT, ZeroExtExtendee,
                         N0.getOperand(1));
    }
  }

  // fold (and (masked_gather x)) -> (zext_masked_gather x)
  if (auto *GN0 = dyn_cast<MaskedGatherSDNode>(N0)) {
    EVT MemVT = GN0->getMemoryVT();
    EVT ScalarVT = MemVT.getScalarType();

    if (SDValue(GN0, 0).hasOneUse() &&
        isConstantSplatVectorMaskForType(N1.getNode(), ScalarVT) &&
        TLI.isVectorLoadExtDesirable(SDValue(SDValue(GN0, 0)))) {
      SDValue Ops[] = {GN0->getChain(),   GN0->getPassThru(), GN0->getMask(),
                       GN0->getBasePtr(), GN0->getIndex(),    GN0->getScale()};

      SDValue ZExtLoad = DAG.getMaskedGather(
          DAG.getVTList(VT, MVT::Other), MemVT, DL, Ops, GN0->getMemOperand(),
          GN0->getIndexType(), ISD::ZEXTLOAD);

      CombineTo(N, ZExtLoad);
      AddToWorklist(ZExtLoad.getNode());
      // Avoid recheck of N.
      return SDValue(N, 0);
    }
  }

  // fold (and (load x), 255) -> (zextload x, i8)
  // fold (and (extload x, i16), 255) -> (zextload x, i8)
  if (N1C && N0.getOpcode() == ISD::LOAD && !VT.isVector())
    if (SDValue Res = reduceLoadWidth(N))
      return Res;

  if (LegalTypes) {
    // Attempt to propagate the AND back up to the leaves which, if they're
    // loads, can be combined to narrow loads and the AND node can be removed.
    // Perform after legalization so that extend nodes will already be
    // combined into the loads.
    if (BackwardsPropagateMask(N))
      return SDValue(N, 0);
  }

  if (SDValue Combined = visitANDLike(N0, N1, N))
    return Combined;

  // Simplify: (and (op x...), (op y...))  -> (op (and x, y))
  if (N0.getOpcode() == N1.getOpcode())
    if (SDValue V = hoistLogicOpWithSameOpcodeHands(N))
      return V;

  if (SDValue R = foldLogicOfShifts(N, N0, N1, DAG))
    return R;
  if (SDValue R = foldLogicOfShifts(N, N1, N0, DAG))
    return R;

  // Fold (and X, (bswap (not Y))) -> (and X, (not (bswap Y)))
  // Fold (and X, (bitreverse (not Y))) -> (and X, (not (bitreverse Y)))
  SDValue X, Y, Z, NotY;
  for (unsigned Opc : {ISD::BSWAP, ISD::BITREVERSE})
    if (sd_match(N,
                 m_And(m_Value(X), m_OneUse(m_UnaryOp(Opc, m_Value(NotY))))) &&
        sd_match(NotY, m_Not(m_Value(Y))) &&
        (TLI.hasAndNot(SDValue(N, 0)) || NotY->hasOneUse()))
      return DAG.getNode(ISD::AND, DL, VT, X,
                         DAG.getNOT(DL, DAG.getNode(Opc, DL, VT, Y), VT));

  // Fold (and X, (rot (not Y), Z)) -> (and X, (not (rot Y, Z)))
  for (unsigned Opc : {ISD::ROTL, ISD::ROTR})
    if (sd_match(N, m_And(m_Value(X),
                          m_OneUse(m_BinOp(Opc, m_Value(NotY), m_Value(Z))))) &&
        sd_match(NotY, m_Not(m_Value(Y))) &&
        (TLI.hasAndNot(SDValue(N, 0)) || NotY->hasOneUse()))
      return DAG.getNode(ISD::AND, DL, VT, X,
                         DAG.getNOT(DL, DAG.getNode(Opc, DL, VT, Y, Z), VT));

  // Fold (and (srl X, C), 1) -> (srl X, BW-1) for signbit extraction
  // If we are shifting down an extended sign bit, see if we can simplify
  // this to shifting the MSB directly to expose further simplifications.
  // This pattern often appears after sext_inreg legalization.
  APInt Amt;
  if (sd_match(N, m_And(m_Srl(m_Value(X), m_ConstInt(Amt)), m_One())) &&
      Amt.ult(BitWidth - 1) && Amt.uge(BitWidth - DAG.ComputeNumSignBits(X)))
    return DAG.getNode(ISD::SRL, DL, VT, X,
                       DAG.getShiftAmountConstant(BitWidth - 1, VT, DL));

  // Masking the negated extension of a boolean is just the zero-extended
  // boolean:
  // and (sub 0, zext(bool X)), 1 --> zext(bool X)
  // and (sub 0, sext(bool X)), 1 --> zext(bool X)
  //
  // Note: the SimplifyDemandedBits fold below can make an information-losing
  // transform, and then we have no way to find this better fold.
  if (sd_match(N, m_And(m_Sub(m_Zero(), m_Value(X)), m_One()))) {
    if (X.getOpcode() == ISD::ZERO_EXTEND &&
        X.getOperand(0).getScalarValueSizeInBits() == 1)
      return X;
    if (X.getOpcode() == ISD::SIGN_EXTEND &&
        X.getOperand(0).getScalarValueSizeInBits() == 1)
      return DAG.getNode(ISD::ZERO_EXTEND, DL, VT, X.getOperand(0));
  }

  // fold (and (sign_extend_inreg x, i16 to i32), 1) -> (and x, 1)
  // fold (and (sra)) -> (and (srl)) when possible.
  if (SimplifyDemandedBits(SDValue(N, 0)))
    return SDValue(N, 0);

  // fold (zext_inreg (extload x)) -> (zextload x)
  // fold (zext_inreg (sextload x)) -> (zextload x) iff load has one use
  if (ISD::isUNINDEXEDLoad(N0.getNode()) &&
      (ISD::isEXTLoad(N0.getNode()) ||
       (ISD::isSEXTLoad(N0.getNode()) && N0.hasOneUse()))) {
    auto *LN0 = cast<LoadSDNode>(N0);
    EVT MemVT = LN0->getMemoryVT();
    // If we zero all the possible extended bits, then we can turn this into
    // a zextload if we are running before legalize or the operation is legal.
    unsigned ExtBitSize = N1.getScalarValueSizeInBits();
    unsigned MemBitSize = MemVT.getScalarSizeInBits();
    APInt ExtBits = APInt::getHighBitsSet(ExtBitSize, ExtBitSize - MemBitSize);
    if (DAG.MaskedValueIsZero(N1, ExtBits) &&
        ((!LegalOperations && LN0->isSimple()) ||
         TLI.isLoadExtLegal(ISD::ZEXTLOAD, VT, MemVT))) {
      SDValue ExtLoad =
          DAG.getExtLoad(ISD::ZEXTLOAD, SDLoc(N0), VT, LN0->getChain(),
                         LN0->getBasePtr(), MemVT, LN0->getMemOperand());
      AddToWorklist(N);
      CombineTo(N0.getNode(), ExtLoad, ExtLoad.getValue(1));
      return SDValue(N, 0); // Return N so it doesn't get rechecked!
    }
  }

  // fold (and (or (srl N, 8), (shl N, 8)), 0xffff) -> (srl (bswap N), const)
  if (N1C && N1C->getAPIntValue() == 0xffff && N0.getOpcode() == ISD::OR) {
    if (SDValue BSwap = MatchBSwapHWordLow(N0.getNode(), N0.getOperand(0),
                                           N0.getOperand(1), false))
      return BSwap;
  }

  if (SDValue Shifts = unfoldExtremeBitClearingToShifts(N))
    return Shifts;

  if (SDValue V = combineShiftAnd1ToBitTest(N, DAG))
    return V;

  // Recognize the following pattern:
  //
  // AndVT = (and (sign_extend NarrowVT to AndVT) #bitmask)
  //
  // where bitmask is a mask that clears the upper bits of AndVT. The
  // number of bits in bitmask must be a power of two.
  auto IsAndZeroExtMask = [](SDValue LHS, SDValue RHS) {
    if (LHS->getOpcode() != ISD::SIGN_EXTEND)
      return false;

    auto *C = dyn_cast<ConstantSDNode>(RHS);
    if (!C)
      return false;

    if (!C->getAPIntValue().isMask(
            LHS.getOperand(0).getValueType().getFixedSizeInBits()))
      return false;

    return true;
  };

  // Replace (and (sign_extend ...) #bitmask) with (zero_extend ...).
  if (IsAndZeroExtMask(N0, N1))
    return DAG.getNode(ISD::ZERO_EXTEND, DL, VT, N0.getOperand(0));

  if (hasOperation(ISD::USUBSAT, VT))
    if (SDValue V = foldAndToUsubsat(N, DAG, DL))
      return V;

  // Postpone until legalization completed to avoid interference with bswap
  // folding
  if (LegalOperations || VT.isVector())
    if (SDValue R = foldLogicTreeOfShifts(N, N0, N1, DAG))
      return R;

  return SDValue();
}

/// Match (a >> 8) | (a << 8) as (bswap a) >> 16.
SDValue DAGCombiner::MatchBSwapHWordLow(SDNode *N, SDValue N0, SDValue N1,
                                        bool DemandHighBits) {
  if (!LegalOperations)
    return SDValue();

  EVT VT = N->getValueType(0);
  if (VT != MVT::i64 && VT != MVT::i32 && VT != MVT::i16)
    return SDValue();
  if (!TLI.isOperationLegalOrCustom(ISD::BSWAP, VT))
    return SDValue();

  // Recognize (and (shl a, 8), 0xff00), (and (srl a, 8), 0xff)
  bool LookPassAnd0 = false;
  bool LookPassAnd1 = false;
  if (N0.getOpcode() == ISD::AND && N0.getOperand(0).getOpcode() == ISD::SRL)
    std::swap(N0, N1);
  if (N1.getOpcode() == ISD::AND && N1.getOperand(0).getOpcode() == ISD::SHL)
    std::swap(N0, N1);
  if (N0.getOpcode() == ISD::AND) {
    if (!N0->hasOneUse())
      return SDValue();
    ConstantSDNode *N01C = dyn_cast<ConstantSDNode>(N0.getOperand(1));
    // Also handle 0xffff since the LHS is guaranteed to have zeros there.
    // This is needed for X86.
    if (!N01C || (N01C->getZExtValue() != 0xFF00 &&
                  N01C->getZExtValue() != 0xFFFF))
      return SDValue();
    N0 = N0.getOperand(0);
    LookPassAnd0 = true;
  }

  if (N1.getOpcode() == ISD::AND) {
    if (!N1->hasOneUse())
      return SDValue();
    ConstantSDNode *N11C = dyn_cast<ConstantSDNode>(N1.getOperand(1));
    if (!N11C || N11C->getZExtValue() != 0xFF)
      return SDValue();
    N1 = N1.getOperand(0);
    LookPassAnd1 = true;
  }

  if (N0.getOpcode() == ISD::SRL && N1.getOpcode() == ISD::SHL)
    std::swap(N0, N1);
  if (N0.getOpcode() != ISD::SHL || N1.getOpcode() != ISD::SRL)
    return SDValue();
  if (!N0->hasOneUse() || !N1->hasOneUse())
    return SDValue();

  ConstantSDNode *N01C = dyn_cast<ConstantSDNode>(N0.getOperand(1));
  ConstantSDNode *N11C = dyn_cast<ConstantSDNode>(N1.getOperand(1));
  if (!N01C || !N11C)
    return SDValue();
  if (N01C->getZExtValue() != 8 || N11C->getZExtValue() != 8)
    return SDValue();

  // Look for (shl (and a, 0xff), 8), (srl (and a, 0xff00), 8)
  SDValue N00 = N0->getOperand(0);
  if (!LookPassAnd0 && N00.getOpcode() == ISD::AND) {
    if (!N00->hasOneUse())
      return SDValue();
    ConstantSDNode *N001C = dyn_cast<ConstantSDNode>(N00.getOperand(1));
    if (!N001C || N001C->getZExtValue() != 0xFF)
      return SDValue();
    N00 = N00.getOperand(0);
    LookPassAnd0 = true;
  }

  SDValue N10 = N1->getOperand(0);
  if (!LookPassAnd1 && N10.getOpcode() == ISD::AND) {
    if (!N10->hasOneUse())
      return SDValue();
    ConstantSDNode *N101C = dyn_cast<ConstantSDNode>(N10.getOperand(1));
    // Also allow 0xFFFF since the bits will be shifted out. This is needed
    // for X86.
    if (!N101C || (N101C->getZExtValue() != 0xFF00 &&
                   N101C->getZExtValue() != 0xFFFF))
      return SDValue();
    N10 = N10.getOperand(0);
    LookPassAnd1 = true;
  }

  if (N00 != N10)
    return SDValue();

  // Make sure everything beyond the low halfword gets set to zero since the SRL
  // 16 will clear the top bits.
  unsigned OpSizeInBits = VT.getSizeInBits();
  if (OpSizeInBits > 16) {
    // If the left-shift isn't masked out then the only way this is a bswap is
    // if all bits beyond the low 8 are 0. In that case the entire pattern
    // reduces to a left shift anyway: leave it for other parts of the combiner.
    if (DemandHighBits && !LookPassAnd0)
      return SDValue();

    // However, if the right shift isn't masked out then it might be because
    // it's not needed. See if we can spot that too. If the high bits aren't
    // demanded, we only need bits 23:16 to be zero. Otherwise, we need all
    // upper bits to be zero.
    if (!LookPassAnd1) {
      unsigned HighBit = DemandHighBits ? OpSizeInBits : 24;
      if (!DAG.MaskedValueIsZero(N10,
                                 APInt::getBitsSet(OpSizeInBits, 16, HighBit)))
        return SDValue();
    }
  }

  SDValue Res = DAG.getNode(ISD::BSWAP, SDLoc(N), VT, N00);
  if (OpSizeInBits > 16) {
    SDLoc DL(N);
    Res = DAG.getNode(ISD::SRL, DL, VT, Res,
                      DAG.getShiftAmountConstant(OpSizeInBits - 16, VT, DL));
  }
  return Res;
}

/// Return true if the specified node is an element that makes up a 32-bit
/// packed halfword byteswap.
/// ((x & 0x000000ff) << 8) |
/// ((x & 0x0000ff00) >> 8) |
/// ((x & 0x00ff0000) << 8) |
/// ((x & 0xff000000) >> 8)
static bool isBSwapHWordElement(SDValue N, MutableArrayRef<SDNode *> Parts) {
  if (!N->hasOneUse())
    return false;

  unsigned Opc = N.getOpcode();
  if (Opc != ISD::AND && Opc != ISD::SHL && Opc != ISD::SRL)
    return false;

  SDValue N0 = N.getOperand(0);
  unsigned Opc0 = N0.getOpcode();
  if (Opc0 != ISD::AND && Opc0 != ISD::SHL && Opc0 != ISD::SRL)
    return false;

  ConstantSDNode *N1C = nullptr;
  // SHL or SRL: look upstream for AND mask operand
  if (Opc == ISD::AND)
    N1C = dyn_cast<ConstantSDNode>(N.getOperand(1));
  else if (Opc0 == ISD::AND)
    N1C = dyn_cast<ConstantSDNode>(N0.getOperand(1));
  if (!N1C)
    return false;

  unsigned MaskByteOffset;
  switch (N1C->getZExtValue()) {
  default:
    return false;
  case 0xFF:       MaskByteOffset = 0; break;
  case 0xFF00:     MaskByteOffset = 1; break;
  case 0xFFFF:
    // In case demanded bits didn't clear the bits that will be shifted out.
    // This is needed for X86.
    if (Opc == ISD::SRL || (Opc == ISD::AND && Opc0 == ISD::SHL)) {
      MaskByteOffset = 1;
      break;
    }
    return false;
  case 0xFF0000:   MaskByteOffset = 2; break;
  case 0xFF000000: MaskByteOffset = 3; break;
  }

  // Look for (x & 0xff) << 8 as well as ((x << 8) & 0xff00).
  if (Opc == ISD::AND) {
    if (MaskByteOffset == 0 || MaskByteOffset == 2) {
      // (x >> 8) & 0xff
      // (x >> 8) & 0xff0000
      if (Opc0 != ISD::SRL)
        return false;
      ConstantSDNode *C = dyn_cast<ConstantSDNode>(N0.getOperand(1));
      if (!C || C->getZExtValue() != 8)
        return false;
    } else {
      // (x << 8) & 0xff00
      // (x << 8) & 0xff000000
      if (Opc0 != ISD::SHL)
        return false;
      ConstantSDNode *C = dyn_cast<ConstantSDNode>(N0.getOperand(1));
      if (!C || C->getZExtValue() != 8)
        return false;
    }
  } else if (Opc == ISD::SHL) {
    // (x & 0xff) << 8
    // (x & 0xff0000) << 8
    if (MaskByteOffset != 0 && MaskByteOffset != 2)
      return false;
    ConstantSDNode *C = dyn_cast<ConstantSDNode>(N.getOperand(1));
    if (!C || C->getZExtValue() != 8)
      return false;
  } else { // Opc == ISD::SRL
    // (x & 0xff00) >> 8
    // (x & 0xff000000) >> 8
    if (MaskByteOffset != 1 && MaskByteOffset != 3)
      return false;
    ConstantSDNode *C = dyn_cast<ConstantSDNode>(N.getOperand(1));
    if (!C || C->getZExtValue() != 8)
      return false;
  }

  if (Parts[MaskByteOffset])
    return false;

  Parts[MaskByteOffset] = N0.getOperand(0).getNode();
  return true;
}

// Match 2 elements of a packed halfword bswap.
static bool isBSwapHWordPair(SDValue N, MutableArrayRef<SDNode *> Parts) {
  if (N.getOpcode() == ISD::OR)
    return isBSwapHWordElement(N.getOperand(0), Parts) &&
           isBSwapHWordElement(N.getOperand(1), Parts);

  if (N.getOpcode() == ISD::SRL && N.getOperand(0).getOpcode() == ISD::BSWAP) {
    ConstantSDNode *C = isConstOrConstSplat(N.getOperand(1));
    if (!C || C->getAPIntValue() != 16)
      return false;
    Parts[0] = Parts[1] = N.getOperand(0).getOperand(0).getNode();
    return true;
  }

  return false;
}

// Match this pattern:
//   (or (and (shl (A, 8)), 0xff00ff00), (and (srl (A, 8)), 0x00ff00ff))
// And rewrite this to:
//   (rotr (bswap A), 16)
static SDValue matchBSwapHWordOrAndAnd(const TargetLowering &TLI,
                                       SelectionDAG &DAG, SDNode *N, SDValue N0,
                                       SDValue N1, EVT VT) {
  assert(N->getOpcode() == ISD::OR && VT == MVT::i32 &&
         "MatchBSwapHWordOrAndAnd: expecting i32");
  if (!TLI.isOperationLegalOrCustom(ISD::ROTR, VT))
    return SDValue();
  if (N0.getOpcode() != ISD::AND || N1.getOpcode() != ISD::AND)
    return SDValue();
  // TODO: this is too restrictive; lifting this restriction requires more tests
  if (!N0->hasOneUse() || !N1->hasOneUse())
    return SDValue();
  ConstantSDNode *Mask0 = isConstOrConstSplat(N0.getOperand(1));
  ConstantSDNode *Mask1 = isConstOrConstSplat(N1.getOperand(1));
  if (!Mask0 || !Mask1)
    return SDValue();
  if (Mask0->getAPIntValue() != 0xff00ff00 ||
      Mask1->getAPIntValue() != 0x00ff00ff)
    return SDValue();
  SDValue Shift0 = N0.getOperand(0);
  SDValue Shift1 = N1.getOperand(0);
  if (Shift0.getOpcode() != ISD::SHL || Shift1.getOpcode() != ISD::SRL)
    return SDValue();
  ConstantSDNode *ShiftAmt0 = isConstOrConstSplat(Shift0.getOperand(1));
  ConstantSDNode *ShiftAmt1 = isConstOrConstSplat(Shift1.getOperand(1));
  if (!ShiftAmt0 || !ShiftAmt1)
    return SDValue();
  if (ShiftAmt0->getAPIntValue() != 8 || ShiftAmt1->getAPIntValue() != 8)
    return SDValue();
  if (Shift0.getOperand(0) != Shift1.getOperand(0))
    return SDValue();

  SDLoc DL(N);
  SDValue BSwap = DAG.getNode(ISD::BSWAP, DL, VT, Shift0.getOperand(0));
  SDValue ShAmt = DAG.getShiftAmountConstant(16, VT, DL);
  return DAG.getNode(ISD::ROTR, DL, VT, BSwap, ShAmt);
}

/// Match a 32-bit packed halfword bswap. That is
/// ((x & 0x000000ff) << 8) |
/// ((x & 0x0000ff00) >> 8) |
/// ((x & 0x00ff0000) << 8) |
/// ((x & 0xff000000) >> 8)
/// => (rotl (bswap x), 16)
SDValue DAGCombiner::MatchBSwapHWord(SDNode *N, SDValue N0, SDValue N1) {
  if (!LegalOperations)
    return SDValue();

  EVT VT = N->getValueType(0);
  if (VT != MVT::i32)
    return SDValue();
  if (!TLI.isOperationLegalOrCustom(ISD::BSWAP, VT))
    return SDValue();

  if (SDValue BSwap = matchBSwapHWordOrAndAnd(TLI, DAG, N, N0, N1, VT))
    return BSwap;

  // Try again with commuted operands.
  if (SDValue BSwap = matchBSwapHWordOrAndAnd(TLI, DAG, N, N1, N0, VT))
    return BSwap;


  // Look for either
  // (or (bswaphpair), (bswaphpair))
  // (or (or (bswaphpair), (and)), (and))
  // (or (or (and), (bswaphpair)), (and))
  SDNode *Parts[4] = {};

  if (isBSwapHWordPair(N0, Parts)) {
    // (or (or (and), (and)), (or (and), (and)))
    if (!isBSwapHWordPair(N1, Parts))
      return SDValue();
  } else if (N0.getOpcode() == ISD::OR) {
    // (or (or (or (and), (and)), (and)), (and))
    if (!isBSwapHWordElement(N1, Parts))
      return SDValue();
    SDValue N00 = N0.getOperand(0);
    SDValue N01 = N0.getOperand(1);
    if (!(isBSwapHWordElement(N01, Parts) && isBSwapHWordPair(N00, Parts)) &&
        !(isBSwapHWordElement(N00, Parts) && isBSwapHWordPair(N01, Parts)))
      return SDValue();
  } else {
    return SDValue();
  }

  // Make sure the parts are all coming from the same node.
  if (Parts[0] != Parts[1] || Parts[0] != Parts[2] || Parts[0] != Parts[3])
    return SDValue();

  SDLoc DL(N);
  SDValue BSwap = DAG.getNode(ISD::BSWAP, DL, VT,
                              SDValue(Parts[0], 0));

  // Result of the bswap should be rotated by 16. If it's not legal, then
  // do  (x << 16) | (x >> 16).
  SDValue ShAmt = DAG.getShiftAmountConstant(16, VT, DL);
  if (TLI.isOperationLegalOrCustom(ISD::ROTL, VT))
    return DAG.getNode(ISD::ROTL, DL, VT, BSwap, ShAmt);
  if (TLI.isOperationLegalOrCustom(ISD::ROTR, VT))
    return DAG.getNode(ISD::ROTR, DL, VT, BSwap, ShAmt);
  return DAG.getNode(ISD::OR, DL, VT,
                     DAG.getNode(ISD::SHL, DL, VT, BSwap, ShAmt),
                     DAG.getNode(ISD::SRL, DL, VT, BSwap, ShAmt));
}

/// This contains all DAGCombine rules which reduce two values combined by
/// an Or operation to a single value \see visitANDLike().
SDValue DAGCombiner::visitORLike(SDValue N0, SDValue N1, const SDLoc &DL) {
  EVT VT = N1.getValueType();

  // fold (or x, undef) -> -1
  if (!LegalOperations && (N0.isUndef() || N1.isUndef()))
    return DAG.getAllOnesConstant(DL, VT);

  if (SDValue V = foldLogicOfSetCCs(false, N0, N1, DL))
    return V;

  // (or (and X, C1), (and Y, C2))  -> (and (or X, Y), C3) if possible.
  if (N0.getOpcode() == ISD::AND && N1.getOpcode() == ISD::AND &&
      // Don't increase # computations.
      (N0->hasOneUse() || N1->hasOneUse())) {
    // We can only do this xform if we know that bits from X that are set in C2
    // but not in C1 are already zero.  Likewise for Y.
    if (const ConstantSDNode *N0O1C =
        getAsNonOpaqueConstant(N0.getOperand(1))) {
      if (const ConstantSDNode *N1O1C =
          getAsNonOpaqueConstant(N1.getOperand(1))) {
        // We can only do this xform if we know that bits from X that are set in
        // C2 but not in C1 are already zero.  Likewise for Y.
        const APInt &LHSMask = N0O1C->getAPIntValue();
        const APInt &RHSMask = N1O1C->getAPIntValue();

        if (DAG.MaskedValueIsZero(N0.getOperand(0), RHSMask&~LHSMask) &&
            DAG.MaskedValueIsZero(N1.getOperand(0), LHSMask&~RHSMask)) {
          SDValue X = DAG.getNode(ISD::OR, SDLoc(N0), VT,
                                  N0.getOperand(0), N1.getOperand(0));
          return DAG.getNode(ISD::AND, DL, VT, X,
                             DAG.getConstant(LHSMask | RHSMask, DL, VT));
        }
      }
    }
  }

  // (or (and X, M), (and X, N)) -> (and X, (or M, N))
  if (N0.getOpcode() == ISD::AND &&
      N1.getOpcode() == ISD::AND &&
      N0.getOperand(0) == N1.getOperand(0) &&
      // Don't increase # computations.
      (N0->hasOneUse() || N1->hasOneUse())) {
    SDValue X = DAG.getNode(ISD::OR, SDLoc(N0), VT,
                            N0.getOperand(1), N1.getOperand(1));
    return DAG.getNode(ISD::AND, DL, VT, N0.getOperand(0), X);
  }

  return SDValue();
}

/// OR combines for which the commuted variant will be tried as well.
static SDValue visitORCommutative(SelectionDAG &DAG, SDValue N0, SDValue N1,
                                  SDNode *N) {
  EVT VT = N0.getValueType();
  unsigned BW = VT.getScalarSizeInBits();
  SDLoc DL(N);

  auto peekThroughResize = [](SDValue V) {
    if (V->getOpcode() == ISD::ZERO_EXTEND || V->getOpcode() == ISD::TRUNCATE)
      return V->getOperand(0);
    return V;
  };

  SDValue N0Resized = peekThroughResize(N0);
  if (N0Resized.getOpcode() == ISD::AND) {
    SDValue N1Resized = peekThroughResize(N1);
    SDValue N00 = N0Resized.getOperand(0);
    SDValue N01 = N0Resized.getOperand(1);

    // fold or (and x, y), x --> x
    if (N00 == N1Resized || N01 == N1Resized)
      return N1;

    // fold (or (and X, (xor Y, -1)), Y) -> (or X, Y)
    // TODO: Set AllowUndefs = true.
    if (SDValue NotOperand = getBitwiseNotOperand(N01, N00,
                                                  /* AllowUndefs */ false)) {
      if (peekThroughResize(NotOperand) == N1Resized)
        return DAG.getNode(ISD::OR, DL, VT, DAG.getZExtOrTrunc(N00, DL, VT),
                           N1);
    }

    // fold (or (and (xor Y, -1), X), Y) -> (or X, Y)
    if (SDValue NotOperand = getBitwiseNotOperand(N00, N01,
                                                  /* AllowUndefs */ false)) {
      if (peekThroughResize(NotOperand) == N1Resized)
        return DAG.getNode(ISD::OR, DL, VT, DAG.getZExtOrTrunc(N01, DL, VT),
                           N1);
    }
  }

  SDValue X, Y;

  // fold or (xor X, N1), N1 --> or X, N1
  if (sd_match(N0, m_Xor(m_Value(X), m_Specific(N1))))
    return DAG.getNode(ISD::OR, DL, VT, X, N1);

  // fold or (xor x, y), (x and/or y) --> or x, y
  if (sd_match(N0, m_Xor(m_Value(X), m_Value(Y))) &&
      (sd_match(N1, m_And(m_Specific(X), m_Specific(Y))) ||
       sd_match(N1, m_Or(m_Specific(X), m_Specific(Y)))))
    return DAG.getNode(ISD::OR, DL, VT, X, Y);

  if (SDValue R = foldLogicOfShifts(N, N0, N1, DAG))
    return R;

  auto peekThroughZext = [](SDValue V) {
    if (V->getOpcode() == ISD::ZERO_EXTEND)
      return V->getOperand(0);
    return V;
  };

  // (fshl X, ?, Y) | (shl X, Y) --> fshl X, ?, Y
  if (N0.getOpcode() == ISD::FSHL && N1.getOpcode() == ISD::SHL &&
      N0.getOperand(0) == N1.getOperand(0) &&
      peekThroughZext(N0.getOperand(2)) == peekThroughZext(N1.getOperand(1)))
    return N0;

  // (fshr ?, X, Y) | (srl X, Y) --> fshr ?, X, Y
  if (N0.getOpcode() == ISD::FSHR && N1.getOpcode() == ISD::SRL &&
      N0.getOperand(1) == N1.getOperand(0) &&
      peekThroughZext(N0.getOperand(2)) == peekThroughZext(N1.getOperand(1)))
    return N0;

  // Attempt to match a legalized build_pair-esque pattern:
  // or(shl(aext(Hi),BW/2),zext(Lo))
  SDValue Lo, Hi;
  if (sd_match(N0,
               m_OneUse(m_Shl(m_AnyExt(m_Value(Hi)), m_SpecificInt(BW / 2)))) &&
      sd_match(N1, m_ZExt(m_Value(Lo))) &&
      Lo.getScalarValueSizeInBits() == (BW / 2) &&
      Lo.getValueType() == Hi.getValueType()) {
    // Fold build_pair(not(Lo),not(Hi)) -> not(build_pair(Lo,Hi)).
    SDValue NotLo, NotHi;
    if (sd_match(Lo, m_OneUse(m_Not(m_Value(NotLo)))) &&
        sd_match(Hi, m_OneUse(m_Not(m_Value(NotHi))))) {
      Lo = DAG.getNode(ISD::ZERO_EXTEND, DL, VT, NotLo);
      Hi = DAG.getNode(ISD::ANY_EXTEND, DL, VT, NotHi);
      Hi = DAG.getNode(ISD::SHL, DL, VT, Hi,
                       DAG.getShiftAmountConstant(BW / 2, VT, DL));
      return DAG.getNOT(DL, DAG.getNode(ISD::OR, DL, VT, Lo, Hi), VT);
    }
  }

  return SDValue();
}

SDValue DAGCombiner::visitOR(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N1.getValueType();
  SDLoc DL(N);

  // x | x --> x
  if (N0 == N1)
    return N0;

  // fold (or c1, c2) -> c1|c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::OR, DL, VT, {N0, N1}))
    return C;

  // canonicalize constant to RHS
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
      !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return DAG.getNode(ISD::OR, DL, VT, N1, N0);

  // fold vector ops
  if (VT.isVector()) {
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

    // fold (or x, 0) -> x, vector edition
    if (ISD::isConstantSplatVectorAllZeros(N1.getNode()))
      return N0;

    // fold (or x, -1) -> -1, vector edition
    if (ISD::isConstantSplatVectorAllOnes(N1.getNode()))
      // do not return N1, because undef node may exist in N1
      return DAG.getAllOnesConstant(DL, N1.getValueType());

    // fold (or (shuf A, V_0, MA), (shuf B, V_0, MB)) -> (shuf A, B, Mask)
    // Do this only if the resulting type / shuffle is legal.
    auto *SV0 = dyn_cast<ShuffleVectorSDNode>(N0);
    auto *SV1 = dyn_cast<ShuffleVectorSDNode>(N1);
    if (SV0 && SV1 && TLI.isTypeLegal(VT)) {
      bool ZeroN00 = ISD::isBuildVectorAllZeros(N0.getOperand(0).getNode());
      bool ZeroN01 = ISD::isBuildVectorAllZeros(N0.getOperand(1).getNode());
      bool ZeroN10 = ISD::isBuildVectorAllZeros(N1.getOperand(0).getNode());
      bool ZeroN11 = ISD::isBuildVectorAllZeros(N1.getOperand(1).getNode());
      // Ensure both shuffles have a zero input.
      if ((ZeroN00 != ZeroN01) && (ZeroN10 != ZeroN11)) {
        assert((!ZeroN00 || !ZeroN01) && "Both inputs zero!");
        assert((!ZeroN10 || !ZeroN11) && "Both inputs zero!");
        bool CanFold = true;
        int NumElts = VT.getVectorNumElements();
        SmallVector<int, 4> Mask(NumElts, -1);

        for (int i = 0; i != NumElts; ++i) {
          int M0 = SV0->getMaskElt(i);
          int M1 = SV1->getMaskElt(i);

          // Determine if either index is pointing to a zero vector.
          bool M0Zero = M0 < 0 || (ZeroN00 == (M0 < NumElts));
          bool M1Zero = M1 < 0 || (ZeroN10 == (M1 < NumElts));

          // If one element is zero and the otherside is undef, keep undef.
          // This also handles the case that both are undef.
          if ((M0Zero && M1 < 0) || (M1Zero && M0 < 0))
            continue;

          // Make sure only one of the elements is zero.
          if (M0Zero == M1Zero) {
            CanFold = false;
            break;
          }

          assert((M0 >= 0 || M1 >= 0) && "Undef index!");

          // We have a zero and non-zero element. If the non-zero came from
          // SV0 make the index a LHS index. If it came from SV1, make it
          // a RHS index. We need to mod by NumElts because we don't care
          // which operand it came from in the original shuffles.
          Mask[i] = M1Zero ? M0 % NumElts : (M1 % NumElts) + NumElts;
        }

        if (CanFold) {
          SDValue NewLHS = ZeroN00 ? N0.getOperand(1) : N0.getOperand(0);
          SDValue NewRHS = ZeroN10 ? N1.getOperand(1) : N1.getOperand(0);
          SDValue LegalShuffle =
              TLI.buildLegalVectorShuffle(VT, DL, NewLHS, NewRHS, Mask, DAG);
          if (LegalShuffle)
            return LegalShuffle;
        }
      }
    }
  }

  // fold (or x, 0) -> x
  if (isNullConstant(N1))
    return N0;

  // fold (or x, -1) -> -1
  if (isAllOnesConstant(N1))
    return N1;

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  // fold (or x, c) -> c iff (x & ~c) == 0
  ConstantSDNode *N1C = dyn_cast<ConstantSDNode>(N1);
  if (N1C && DAG.MaskedValueIsZero(N0, ~N1C->getAPIntValue()))
    return N1;

  if (SDValue R = foldAndOrOfSETCC(N, DAG))
    return R;

  if (SDValue Combined = visitORLike(N0, N1, DL))
    return Combined;

  if (SDValue Combined = combineCarryDiamond(DAG, TLI, N0, N1, N))
    return Combined;

  // Recognize halfword bswaps as (bswap + rotl 16) or (bswap + shl 16)
  if (SDValue BSwap = MatchBSwapHWord(N, N0, N1))
    return BSwap;
  if (SDValue BSwap = MatchBSwapHWordLow(N, N0, N1))
    return BSwap;

  // reassociate or
  if (SDValue ROR = reassociateOps(ISD::OR, DL, N0, N1, N->getFlags()))
    return ROR;

  // Fold or(vecreduce(x), vecreduce(y)) -> vecreduce(or(x, y))
  if (SDValue SD =
          reassociateReduction(ISD::VECREDUCE_OR, ISD::OR, DL, VT, N0, N1))
    return SD;

  // Canonicalize (or (and X, c1), c2) -> (and (or X, c2), c1|c2)
  // iff (c1 & c2) != 0 or c1/c2 are undef.
  auto MatchIntersect = [](ConstantSDNode *C1, ConstantSDNode *C2) {
    return !C1 || !C2 || C1->getAPIntValue().intersects(C2->getAPIntValue());
  };
  if (N0.getOpcode() == ISD::AND && N0->hasOneUse() &&
      ISD::matchBinaryPredicate(N0.getOperand(1), N1, MatchIntersect, true)) {
    if (SDValue COR = DAG.FoldConstantArithmetic(ISD::OR, SDLoc(N1), VT,
                                                 {N1, N0.getOperand(1)})) {
      SDValue IOR = DAG.getNode(ISD::OR, SDLoc(N0), VT, N0.getOperand(0), N1);
      AddToWorklist(IOR.getNode());
      return DAG.getNode(ISD::AND, DL, VT, COR, IOR);
    }
  }

  if (SDValue Combined = visitORCommutative(DAG, N0, N1, N))
    return Combined;
  if (SDValue Combined = visitORCommutative(DAG, N1, N0, N))
    return Combined;

  // Simplify: (or (op x...), (op y...))  -> (op (or x, y))
  if (N0.getOpcode() == N1.getOpcode())
    if (SDValue V = hoistLogicOpWithSameOpcodeHands(N))
      return V;

  // See if this is some rotate idiom.
  if (SDValue Rot = MatchRotate(N0, N1, DL))
    return Rot;

  if (SDValue Load = MatchLoadCombine(N))
    return Load;

  // Simplify the operands using demanded-bits information.
  if (SimplifyDemandedBits(SDValue(N, 0)))
    return SDValue(N, 0);

  // If OR can be rewritten into ADD, try combines based on ADD.
  if ((!LegalOperations || TLI.isOperationLegal(ISD::ADD, VT)) &&
      DAG.isADDLike(SDValue(N, 0)))
    if (SDValue Combined = visitADDLike(N))
      return Combined;

  // Postpone until legalization completed to avoid interference with bswap
  // folding
  if (LegalOperations || VT.isVector())
    if (SDValue R = foldLogicTreeOfShifts(N, N0, N1, DAG))
      return R;

  return SDValue();
}

static SDValue stripConstantMask(const SelectionDAG &DAG, SDValue Op,
                                 SDValue &Mask) {
  if (Op.getOpcode() == ISD::AND &&
      DAG.isConstantIntBuildVectorOrConstantInt(Op.getOperand(1))) {
    Mask = Op.getOperand(1);
    return Op.getOperand(0);
  }
  return Op;
}

/// Match "(X shl/srl V1) & V2" where V2 may not be present.
static bool matchRotateHalf(const SelectionDAG &DAG, SDValue Op, SDValue &Shift,
                            SDValue &Mask) {
  Op = stripConstantMask(DAG, Op, Mask);
  if (Op.getOpcode() == ISD::SRL || Op.getOpcode() == ISD::SHL) {
    Shift = Op;
    return true;
  }
  return false;
}

/// Helper function for visitOR to extract the needed side of a rotate idiom
/// from a shl/srl/mul/udiv.  This is meant to handle cases where
/// InstCombine merged some outside op with one of the shifts from
/// the rotate pattern.
/// \returns An empty \c SDValue if the needed shift couldn't be extracted.
/// Otherwise, returns an expansion of \p ExtractFrom based on the following
/// patterns:
///
///   (or (add v v) (shrl v bitwidth-1)):
///     expands (add v v) -> (shl v 1)
///
///   (or (mul v c0) (shrl (mul v c1) c2)):
///     expands (mul v c0) -> (shl (mul v c1) c3)
///
///   (or (udiv v c0) (shl (udiv v c1) c2)):
///     expands (udiv v c0) -> (shrl (udiv v c1) c3)
///
///   (or (shl v c0) (shrl (shl v c1) c2)):
///     expands (shl v c0) -> (shl (shl v c1) c3)
///
///   (or (shrl v c0) (shl (shrl v c1) c2)):
///     expands (shrl v c0) -> (shrl (shrl v c1) c3)
///
/// Such that in all cases, c3+c2==bitwidth(op v c1).
static SDValue extractShiftForRotate(SelectionDAG &DAG, SDValue OppShift,
                                     SDValue ExtractFrom, SDValue &Mask,
                                     const SDLoc &DL) {
  assert(OppShift && ExtractFrom && "Empty SDValue");
  if (OppShift.getOpcode() != ISD::SHL && OppShift.getOpcode() != ISD::SRL)
    return SDValue();

  ExtractFrom = stripConstantMask(DAG, ExtractFrom, Mask);

  // Value and Type of the shift.
  SDValue OppShiftLHS = OppShift.getOperand(0);
  EVT ShiftedVT = OppShiftLHS.getValueType();

  // Amount of the existing shift.
  ConstantSDNode *OppShiftCst = isConstOrConstSplat(OppShift.getOperand(1));

  // (add v v) -> (shl v 1)
  // TODO: Should this be a general DAG canonicalization?
  if (OppShift.getOpcode() == ISD::SRL && OppShiftCst &&
      ExtractFrom.getOpcode() == ISD::ADD &&
      ExtractFrom.getOperand(0) == ExtractFrom.getOperand(1) &&
      ExtractFrom.getOperand(0) == OppShiftLHS &&
      OppShiftCst->getAPIntValue() == ShiftedVT.getScalarSizeInBits() - 1)
    return DAG.getNode(ISD::SHL, DL, ShiftedVT, OppShiftLHS,
                       DAG.getShiftAmountConstant(1, ShiftedVT, DL));

  // Preconditions:
  //    (or (op0 v c0) (shiftl/r (op0 v c1) c2))
  //
  // Find opcode of the needed shift to be extracted from (op0 v c0).
  unsigned Opcode = ISD::DELETED_NODE;
  bool IsMulOrDiv = false;
  // Set Opcode and IsMulOrDiv if the extract opcode matches the needed shift
  // opcode or its arithmetic (mul or udiv) variant.
  auto SelectOpcode = [&](unsigned NeededShift, unsigned MulOrDivVariant) {
    IsMulOrDiv = ExtractFrom.getOpcode() == MulOrDivVariant;
    if (!IsMulOrDiv && ExtractFrom.getOpcode() != NeededShift)
      return false;
    Opcode = NeededShift;
    return true;
  };
  // op0 must be either the needed shift opcode or the mul/udiv equivalent
  // that the needed shift can be extracted from.
  if ((OppShift.getOpcode() != ISD::SRL || !SelectOpcode(ISD::SHL, ISD::MUL)) &&
      (OppShift.getOpcode() != ISD::SHL || !SelectOpcode(ISD::SRL, ISD::UDIV)))
    return SDValue();

  // op0 must be the same opcode on both sides, have the same LHS argument,
  // and produce the same value type.
  if (OppShiftLHS.getOpcode() != ExtractFrom.getOpcode() ||
      OppShiftLHS.getOperand(0) != ExtractFrom.getOperand(0) ||
      ShiftedVT != ExtractFrom.getValueType())
    return SDValue();

  // Constant mul/udiv/shift amount from the RHS of the shift's LHS op.
  ConstantSDNode *OppLHSCst = isConstOrConstSplat(OppShiftLHS.getOperand(1));
  // Constant mul/udiv/shift amount from the RHS of the ExtractFrom op.
  ConstantSDNode *ExtractFromCst =
      isConstOrConstSplat(ExtractFrom.getOperand(1));
  // TODO: We should be able to handle non-uniform constant vectors for these values
  // Check that we have constant values.
  if (!OppShiftCst || !OppShiftCst->getAPIntValue() ||
      !OppLHSCst || !OppLHSCst->getAPIntValue() ||
      !ExtractFromCst || !ExtractFromCst->getAPIntValue())
    return SDValue();

  // Compute the shift amount we need to extract to complete the rotate.
  const unsigned VTWidth = ShiftedVT.getScalarSizeInBits();
  if (OppShiftCst->getAPIntValue().ugt(VTWidth))
    return SDValue();
  APInt NeededShiftAmt = VTWidth - OppShiftCst->getAPIntValue();
  // Normalize the bitwidth of the two mul/udiv/shift constant operands.
  APInt ExtractFromAmt = ExtractFromCst->getAPIntValue();
  APInt OppLHSAmt = OppLHSCst->getAPIntValue();
  zeroExtendToMatch(ExtractFromAmt, OppLHSAmt);

  // Now try extract the needed shift from the ExtractFrom op and see if the
  // result matches up with the existing shift's LHS op.
  if (IsMulOrDiv) {
    // Op to extract from is a mul or udiv by a constant.
    // Check:
    //     c2 / (1 << (bitwidth(op0 v c0) - c1)) == c0
    //     c2 % (1 << (bitwidth(op0 v c0) - c1)) == 0
    const APInt ExtractDiv = APInt::getOneBitSet(ExtractFromAmt.getBitWidth(),
                                                 NeededShiftAmt.getZExtValue());
    APInt ResultAmt;
    APInt Rem;
    APInt::udivrem(ExtractFromAmt, ExtractDiv, ResultAmt, Rem);
    if (Rem != 0 || ResultAmt != OppLHSAmt)
      return SDValue();
  } else {
    // Op to extract from is a shift by a constant.
    // Check:
    //      c2 - (bitwidth(op0 v c0) - c1) == c0
    if (OppLHSAmt != ExtractFromAmt - NeededShiftAmt.zextOrTrunc(
                                          ExtractFromAmt.getBitWidth()))
      return SDValue();
  }

  // Return the expanded shift op that should allow a rotate to be formed.
  EVT ShiftVT = OppShift.getOperand(1).getValueType();
  EVT ResVT = ExtractFrom.getValueType();
  SDValue NewShiftNode = DAG.getConstant(NeededShiftAmt, DL, ShiftVT);
  return DAG.getNode(Opcode, DL, ResVT, OppShiftLHS, NewShiftNode);
}

// Return true if we can prove that, whenever Neg and Pos are both in the
// range [0, EltSize), Neg == (Pos == 0 ? 0 : EltSize - Pos).  This means that
// for two opposing shifts shift1 and shift2 and a value X with OpBits bits:
//
//     (or (shift1 X, Neg), (shift2 X, Pos))
//
// reduces to a rotate in direction shift2 by Pos or (equivalently) a rotate
// in direction shift1 by Neg.  The range [0, EltSize) means that we only need
// to consider shift amounts with defined behavior.
//
// The IsRotate flag should be set when the LHS of both shifts is the same.
// Otherwise if matching a general funnel shift, it should be clear.
static bool matchRotateSub(SDValue Pos, SDValue Neg, unsigned EltSize,
                           SelectionDAG &DAG, bool IsRotate) {
  const auto &TLI = DAG.getTargetLoweringInfo();
  // If EltSize is a power of 2 then:
  //
  //  (a) (Pos == 0 ? 0 : EltSize - Pos) == (EltSize - Pos) & (EltSize - 1)
  //  (b) Neg == Neg & (EltSize - 1) whenever Neg is in [0, EltSize).
  //
  // So if EltSize is a power of 2 and Neg is (and Neg', EltSize-1), we check
  // for the stronger condition:
  //
  //     Neg & (EltSize - 1) == (EltSize - Pos) & (EltSize - 1)    [A]
  //
  // for all Neg and Pos.  Since Neg & (EltSize - 1) == Neg' & (EltSize - 1)
  // we can just replace Neg with Neg' for the rest of the function.
  //
  // In other cases we check for the even stronger condition:
  //
  //     Neg == EltSize - Pos                                    [B]
  //
  // for all Neg and Pos.  Note that the (or ...) then invokes undefined
  // behavior if Pos == 0 (and consequently Neg == EltSize).
  //
  // We could actually use [A] whenever EltSize is a power of 2, but the
  // only extra cases that it would match are those uninteresting ones
  // where Neg and Pos are never in range at the same time.  E.g. for
  // EltSize == 32, using [A] would allow a Neg of the form (sub 64, Pos)
  // as well as (sub 32, Pos), but:
  //
  //     (or (shift1 X, (sub 64, Pos)), (shift2 X, Pos))
  //
  // always invokes undefined behavior for 32-bit X.
  //
  // Below, Mask == EltSize - 1 when using [A] and is all-ones otherwise.
  // This allows us to peek through any operations that only affect Mask's
  // un-demanded bits.
  //
  // NOTE: We can only do this when matching operations which won't modify the
  // least Log2(EltSize) significant bits and not a general funnel shift.
  unsigned MaskLoBits = 0;
  if (IsRotate && isPowerOf2_64(EltSize)) {
    unsigned Bits = Log2_64(EltSize);
    unsigned NegBits = Neg.getScalarValueSizeInBits();
    if (NegBits >= Bits) {
      APInt DemandedBits = APInt::getLowBitsSet(NegBits, Bits);
      if (SDValue Inner =
              TLI.SimplifyMultipleUseDemandedBits(Neg, DemandedBits, DAG)) {
        Neg = Inner;
        MaskLoBits = Bits;
      }
    }
  }

  // Check whether Neg has the form (sub NegC, NegOp1) for some NegC and NegOp1.
  if (Neg.getOpcode() != ISD::SUB)
    return false;
  ConstantSDNode *NegC = isConstOrConstSplat(Neg.getOperand(0));
  if (!NegC)
    return false;
  SDValue NegOp1 = Neg.getOperand(1);

  // On the RHS of [A], if Pos is the result of operation on Pos' that won't
  // affect Mask's demanded bits, just replace Pos with Pos'. These operations
  // are redundant for the purpose of the equality.
  if (MaskLoBits) {
    unsigned PosBits = Pos.getScalarValueSizeInBits();
    if (PosBits >= MaskLoBits) {
      APInt DemandedBits = APInt::getLowBitsSet(PosBits, MaskLoBits);
      if (SDValue Inner =
              TLI.SimplifyMultipleUseDemandedBits(Pos, DemandedBits, DAG)) {
        Pos = Inner;
      }
    }
  }

  // The condition we need is now:
  //
  //     (NegC - NegOp1) & Mask == (EltSize - Pos) & Mask
  //
  // If NegOp1 == Pos then we need:
  //
  //              EltSize & Mask == NegC & Mask
  //
  // (because "x & Mask" is a truncation and distributes through subtraction).
  //
  // We also need to account for a potential truncation of NegOp1 if the amount
  // has already been legalized to a shift amount type.
  APInt Width;
  if ((Pos == NegOp1) ||
      (NegOp1.getOpcode() == ISD::TRUNCATE && Pos == NegOp1.getOperand(0)))
    Width = NegC->getAPIntValue();

  // Check for cases where Pos has the form (add NegOp1, PosC) for some PosC.
  // Then the condition we want to prove becomes:
  //
  //     (NegC - NegOp1) & Mask == (EltSize - (NegOp1 + PosC)) & Mask
  //
  // which, again because "x & Mask" is a truncation, becomes:
  //
  //                NegC & Mask == (EltSize - PosC) & Mask
  //             EltSize & Mask == (NegC + PosC) & Mask
  else if (Pos.getOpcode() == ISD::ADD && Pos.getOperand(0) == NegOp1) {
    if (ConstantSDNode *PosC = isConstOrConstSplat(Pos.getOperand(1)))
      Width = PosC->getAPIntValue() + NegC->getAPIntValue();
    else
      return false;
  } else
    return false;

  // Now we just need to check that EltSize & Mask == Width & Mask.
  if (MaskLoBits)
    // EltSize & Mask is 0 since Mask is EltSize - 1.
    return Width.getLoBits(MaskLoBits) == 0;
  return Width == EltSize;
}

// A subroutine of MatchRotate used once we have found an OR of two opposite
// shifts of Shifted.  If Neg == <operand size> - Pos then the OR reduces
// to both (PosOpcode Shifted, Pos) and (NegOpcode Shifted, Neg), with the
// former being preferred if supported.  InnerPos and InnerNeg are Pos and
// Neg with outer conversions stripped away.
SDValue DAGCombiner::MatchRotatePosNeg(SDValue Shifted, SDValue Pos,
                                       SDValue Neg, SDValue InnerPos,
                                       SDValue InnerNeg, bool HasPos,
                                       unsigned PosOpcode, unsigned NegOpcode,
                                       const SDLoc &DL) {
  // fold (or (shl x, (*ext y)),
  //          (srl x, (*ext (sub 32, y)))) ->
  //   (rotl x, y) or (rotr x, (sub 32, y))
  //
  // fold (or (shl x, (*ext (sub 32, y))),
  //          (srl x, (*ext y))) ->
  //   (rotr x, y) or (rotl x, (sub 32, y))
  EVT VT = Shifted.getValueType();
  if (matchRotateSub(InnerPos, InnerNeg, VT.getScalarSizeInBits(), DAG,
                     /*IsRotate*/ true)) {
    return DAG.getNode(HasPos ? PosOpcode : NegOpcode, DL, VT, Shifted,
                       HasPos ? Pos : Neg);
  }

  return SDValue();
}

// A subroutine of MatchRotate used once we have found an OR of two opposite
// shifts of N0 + N1.  If Neg == <operand size> - Pos then the OR reduces
// to both (PosOpcode N0, N1, Pos) and (NegOpcode N0, N1, Neg), with the
// former being preferred if supported.  InnerPos and InnerNeg are Pos and
// Neg with outer conversions stripped away.
// TODO: Merge with MatchRotatePosNeg.
SDValue DAGCombiner::MatchFunnelPosNeg(SDValue N0, SDValue N1, SDValue Pos,
                                       SDValue Neg, SDValue InnerPos,
                                       SDValue InnerNeg, bool HasPos,
                                       unsigned PosOpcode, unsigned NegOpcode,
                                       const SDLoc &DL) {
  EVT VT = N0.getValueType();
  unsigned EltBits = VT.getScalarSizeInBits();

  // fold (or (shl x0, (*ext y)),
  //          (srl x1, (*ext (sub 32, y)))) ->
  //   (fshl x0, x1, y) or (fshr x0, x1, (sub 32, y))
  //
  // fold (or (shl x0, (*ext (sub 32, y))),
  //          (srl x1, (*ext y))) ->
  //   (fshr x0, x1, y) or (fshl x0, x1, (sub 32, y))
  if (matchRotateSub(InnerPos, InnerNeg, EltBits, DAG, /*IsRotate*/ N0 == N1)) {
    return DAG.getNode(HasPos ? PosOpcode : NegOpcode, DL, VT, N0, N1,
                       HasPos ? Pos : Neg);
  }

  // Matching the shift+xor cases, we can't easily use the xor'd shift amount
  // so for now just use the PosOpcode case if its legal.
  // TODO: When can we use the NegOpcode case?
  if (PosOpcode == ISD::FSHL && isPowerOf2_32(EltBits)) {
    auto IsBinOpImm = [](SDValue Op, unsigned BinOpc, unsigned Imm) {
      if (Op.getOpcode() != BinOpc)
        return false;
      ConstantSDNode *Cst = isConstOrConstSplat(Op.getOperand(1));
      return Cst && (Cst->getAPIntValue() == Imm);
    };

    // fold (or (shl x0, y), (srl (srl x1, 1), (xor y, 31)))
    //   -> (fshl x0, x1, y)
    if (IsBinOpImm(N1, ISD::SRL, 1) &&
        IsBinOpImm(InnerNeg, ISD::XOR, EltBits - 1) &&
        InnerPos == InnerNeg.getOperand(0) &&
        TLI.isOperationLegalOrCustom(ISD::FSHL, VT)) {
      return DAG.getNode(ISD::FSHL, DL, VT, N0, N1.getOperand(0), Pos);
    }

    // fold (or (shl (shl x0, 1), (xor y, 31)), (srl x1, y))
    //   -> (fshr x0, x1, y)
    if (IsBinOpImm(N0, ISD::SHL, 1) &&
        IsBinOpImm(InnerPos, ISD::XOR, EltBits - 1) &&
        InnerNeg == InnerPos.getOperand(0) &&
        TLI.isOperationLegalOrCustom(ISD::FSHR, VT)) {
      return DAG.getNode(ISD::FSHR, DL, VT, N0.getOperand(0), N1, Neg);
    }

    // fold (or (shl (add x0, x0), (xor y, 31)), (srl x1, y))
    //   -> (fshr x0, x1, y)
    // TODO: Should add(x,x) -> shl(x,1) be a general DAG canonicalization?
    if (N0.getOpcode() == ISD::ADD && N0.getOperand(0) == N0.getOperand(1) &&
        IsBinOpImm(InnerPos, ISD::XOR, EltBits - 1) &&
        InnerNeg == InnerPos.getOperand(0) &&
        TLI.isOperationLegalOrCustom(ISD::FSHR, VT)) {
      return DAG.getNode(ISD::FSHR, DL, VT, N0.getOperand(0), N1, Neg);
    }
  }

  return SDValue();
}

// MatchRotate - Handle an 'or' of two operands.  If this is one of the many
// idioms for rotate, and if the target supports rotation instructions, generate
// a rot[lr]. This also matches funnel shift patterns, similar to rotation but
// with different shifted sources.
SDValue DAGCombiner::MatchRotate(SDValue LHS, SDValue RHS, const SDLoc &DL) {
  EVT VT = LHS.getValueType();

  // The target must have at least one rotate/funnel flavor.
  // We still try to match rotate by constant pre-legalization.
  // TODO: Support pre-legalization funnel-shift by constant.
  bool HasROTL = hasOperation(ISD::ROTL, VT);
  bool HasROTR = hasOperation(ISD::ROTR, VT);
  bool HasFSHL = hasOperation(ISD::FSHL, VT);
  bool HasFSHR = hasOperation(ISD::FSHR, VT);

  // If the type is going to be promoted and the target has enabled custom
  // lowering for rotate, allow matching rotate by non-constants. Only allow
  // this for scalar types.
  if (VT.isScalarInteger() && TLI.getTypeAction(*DAG.getContext(), VT) ==
                                  TargetLowering::TypePromoteInteger) {
    HasROTL |= TLI.getOperationAction(ISD::ROTL, VT) == TargetLowering::Custom;
    HasROTR |= TLI.getOperationAction(ISD::ROTR, VT) == TargetLowering::Custom;
  }

  if (LegalOperations && !HasROTL && !HasROTR && !HasFSHL && !HasFSHR)
    return SDValue();

  // Check for truncated rotate.
  if (LHS.getOpcode() == ISD::TRUNCATE && RHS.getOpcode() == ISD::TRUNCATE &&
      LHS.getOperand(0).getValueType() == RHS.getOperand(0).getValueType()) {
    assert(LHS.getValueType() == RHS.getValueType());
    if (SDValue Rot = MatchRotate(LHS.getOperand(0), RHS.getOperand(0), DL)) {
      return DAG.getNode(ISD::TRUNCATE, SDLoc(LHS), LHS.getValueType(), Rot);
    }
  }

  // Match "(X shl/srl V1) & V2" where V2 may not be present.
  SDValue LHSShift;   // The shift.
  SDValue LHSMask;    // AND value if any.
  matchRotateHalf(DAG, LHS, LHSShift, LHSMask);

  SDValue RHSShift;   // The shift.
  SDValue RHSMask;    // AND value if any.
  matchRotateHalf(DAG, RHS, RHSShift, RHSMask);

  // If neither side matched a rotate half, bail
  if (!LHSShift && !RHSShift)
    return SDValue();

  // InstCombine may have combined a constant shl, srl, mul, or udiv with one
  // side of the rotate, so try to handle that here. In all cases we need to
  // pass the matched shift from the opposite side to compute the opcode and
  // needed shift amount to extract.  We still want to do this if both sides
  // matched a rotate half because one half may be a potential overshift that
  // can be broken down (ie if InstCombine merged two shl or srl ops into a
  // single one).

  // Have LHS side of the rotate, try to extract the needed shift from the RHS.
  if (LHSShift)
    if (SDValue NewRHSShift =
            extractShiftForRotate(DAG, LHSShift, RHS, RHSMask, DL))
      RHSShift = NewRHSShift;
  // Have RHS side of the rotate, try to extract the needed shift from the LHS.
  if (RHSShift)
    if (SDValue NewLHSShift =
            extractShiftForRotate(DAG, RHSShift, LHS, LHSMask, DL))
      LHSShift = NewLHSShift;

  // If a side is still missing, nothing else we can do.
  if (!RHSShift || !LHSShift)
    return SDValue();

  // At this point we've matched or extracted a shift op on each side.

  if (LHSShift.getOpcode() == RHSShift.getOpcode())
    return SDValue(); // Shifts must disagree.

  // Canonicalize shl to left side in a shl/srl pair.
  if (RHSShift.getOpcode() == ISD::SHL) {
    std::swap(LHS, RHS);
    std::swap(LHSShift, RHSShift);
    std::swap(LHSMask, RHSMask);
  }

  // Something has gone wrong - we've lost the shl/srl pair - bail.
  if (LHSShift.getOpcode() != ISD::SHL || RHSShift.getOpcode() != ISD::SRL)
    return SDValue();

  unsigned EltSizeInBits = VT.getScalarSizeInBits();
  SDValue LHSShiftArg = LHSShift.getOperand(0);
  SDValue LHSShiftAmt = LHSShift.getOperand(1);
  SDValue RHSShiftArg = RHSShift.getOperand(0);
  SDValue RHSShiftAmt = RHSShift.getOperand(1);

  auto MatchRotateSum = [EltSizeInBits](ConstantSDNode *LHS,
                                        ConstantSDNode *RHS) {
    return (LHS->getAPIntValue() + RHS->getAPIntValue()) == EltSizeInBits;
  };

  auto ApplyMasks = [&](SDValue Res) {
    // If there is an AND of either shifted operand, apply it to the result.
    if (LHSMask.getNode() || RHSMask.getNode()) {
      SDValue AllOnes = DAG.getAllOnesConstant(DL, VT);
      SDValue Mask = AllOnes;

      if (LHSMask.getNode()) {
        SDValue RHSBits = DAG.getNode(ISD::SRL, DL, VT, AllOnes, RHSShiftAmt);
        Mask = DAG.getNode(ISD::AND, DL, VT, Mask,
                           DAG.getNode(ISD::OR, DL, VT, LHSMask, RHSBits));
      }
      if (RHSMask.getNode()) {
        SDValue LHSBits = DAG.getNode(ISD::SHL, DL, VT, AllOnes, LHSShiftAmt);
        Mask = DAG.getNode(ISD::AND, DL, VT, Mask,
                           DAG.getNode(ISD::OR, DL, VT, RHSMask, LHSBits));
      }

      Res = DAG.getNode(ISD::AND, DL, VT, Res, Mask);
    }

    return Res;
  };

  // TODO: Support pre-legalization funnel-shift by constant.
  bool IsRotate = LHSShiftArg == RHSShiftArg;
  if (!IsRotate && !(HasFSHL || HasFSHR)) {
    if (TLI.isTypeLegal(VT) && LHS.hasOneUse() && RHS.hasOneUse() &&
        ISD::matchBinaryPredicate(LHSShiftAmt, RHSShiftAmt, MatchRotateSum)) {
      // Look for a disguised rotate by constant.
      // The common shifted operand X may be hidden inside another 'or'.
      SDValue X, Y;
      auto matchOr = [&X, &Y](SDValue Or, SDValue CommonOp) {
        if (!Or.hasOneUse() || Or.getOpcode() != ISD::OR)
          return false;
        if (CommonOp == Or.getOperand(0)) {
          X = CommonOp;
          Y = Or.getOperand(1);
          return true;
        }
        if (CommonOp == Or.getOperand(1)) {
          X = CommonOp;
          Y = Or.getOperand(0);
          return true;
        }
        return false;
      };

      SDValue Res;
      if (matchOr(LHSShiftArg, RHSShiftArg)) {
        // (shl (X | Y), C1) | (srl X, C2) --> (rotl X, C1) | (shl Y, C1)
        SDValue RotX = DAG.getNode(ISD::ROTL, DL, VT, X, LHSShiftAmt);
        SDValue ShlY = DAG.getNode(ISD::SHL, DL, VT, Y, LHSShiftAmt);
        Res = DAG.getNode(ISD::OR, DL, VT, RotX, ShlY);
      } else if (matchOr(RHSShiftArg, LHSShiftArg)) {
        // (shl X, C1) | (srl (X | Y), C2) --> (rotl X, C1) | (srl Y, C2)
        SDValue RotX = DAG.getNode(ISD::ROTL, DL, VT, X, LHSShiftAmt);
        SDValue SrlY = DAG.getNode(ISD::SRL, DL, VT, Y, RHSShiftAmt);
        Res = DAG.getNode(ISD::OR, DL, VT, RotX, SrlY);
      } else {
        return SDValue();
      }

      return ApplyMasks(Res);
    }

    return SDValue(); // Requires funnel shift support.
  }

  // fold (or (shl x, C1), (srl x, C2)) -> (rotl x, C1)
  // fold (or (shl x, C1), (srl x, C2)) -> (rotr x, C2)
  // fold (or (shl x, C1), (srl y, C2)) -> (fshl x, y, C1)
  // fold (or (shl x, C1), (srl y, C2)) -> (fshr x, y, C2)
  // iff C1+C2 == EltSizeInBits
  if (ISD::matchBinaryPredicate(LHSShiftAmt, RHSShiftAmt, MatchRotateSum)) {
    SDValue Res;
    if (IsRotate && (HasROTL || HasROTR || !(HasFSHL || HasFSHR))) {
      bool UseROTL = !LegalOperations || HasROTL;
      Res = DAG.getNode(UseROTL ? ISD::ROTL : ISD::ROTR, DL, VT, LHSShiftArg,
                        UseROTL ? LHSShiftAmt : RHSShiftAmt);
    } else {
      bool UseFSHL = !LegalOperations || HasFSHL;
      Res = DAG.getNode(UseFSHL ? ISD::FSHL : ISD::FSHR, DL, VT, LHSShiftArg,
                        RHSShiftArg, UseFSHL ? LHSShiftAmt : RHSShiftAmt);
    }

    return ApplyMasks(Res);
  }

  // Even pre-legalization, we can't easily rotate/funnel-shift by a variable
  // shift.
  if (!HasROTL && !HasROTR && !HasFSHL && !HasFSHR)
    return SDValue();

  // If there is a mask here, and we have a variable shift, we can't be sure
  // that we're masking out the right stuff.
  if (LHSMask.getNode() || RHSMask.getNode())
    return SDValue();

  // If the shift amount is sign/zext/any-extended just peel it off.
  SDValue LExtOp0 = LHSShiftAmt;
  SDValue RExtOp0 = RHSShiftAmt;
  if ((LHSShiftAmt.getOpcode() == ISD::SIGN_EXTEND ||
       LHSShiftAmt.getOpcode() == ISD::ZERO_EXTEND ||
       LHSShiftAmt.getOpcode() == ISD::ANY_EXTEND ||
       LHSShiftAmt.getOpcode() == ISD::TRUNCATE) &&
      (RHSShiftAmt.getOpcode() == ISD::SIGN_EXTEND ||
       RHSShiftAmt.getOpcode() == ISD::ZERO_EXTEND ||
       RHSShiftAmt.getOpcode() == ISD::ANY_EXTEND ||
       RHSShiftAmt.getOpcode() == ISD::TRUNCATE)) {
    LExtOp0 = LHSShiftAmt.getOperand(0);
    RExtOp0 = RHSShiftAmt.getOperand(0);
  }

  if (IsRotate && (HasROTL || HasROTR)) {
    SDValue TryL =
        MatchRotatePosNeg(LHSShiftArg, LHSShiftAmt, RHSShiftAmt, LExtOp0,
                          RExtOp0, HasROTL, ISD::ROTL, ISD::ROTR, DL);
    if (TryL)
      return TryL;

    SDValue TryR =
        MatchRotatePosNeg(RHSShiftArg, RHSShiftAmt, LHSShiftAmt, RExtOp0,
                          LExtOp0, HasROTR, ISD::ROTR, ISD::ROTL, DL);
    if (TryR)
      return TryR;
  }

  SDValue TryL =
      MatchFunnelPosNeg(LHSShiftArg, RHSShiftArg, LHSShiftAmt, RHSShiftAmt,
                        LExtOp0, RExtOp0, HasFSHL, ISD::FSHL, ISD::FSHR, DL);
  if (TryL)
    return TryL;

  SDValue TryR =
      MatchFunnelPosNeg(LHSShiftArg, RHSShiftArg, RHSShiftAmt, LHSShiftAmt,
                        RExtOp0, LExtOp0, HasFSHR, ISD::FSHR, ISD::FSHL, DL);
  if (TryR)
    return TryR;

  return SDValue();
}

/// Recursively traverses the expression calculating the origin of the requested
/// byte of the given value. Returns std::nullopt if the provider can't be
/// calculated.
///
/// For all the values except the root of the expression, we verify that the
/// value has exactly one use and if not then return std::nullopt. This way if
/// the origin of the byte is returned it's guaranteed that the values which
/// contribute to the byte are not used outside of this expression.

/// However, there is a special case when dealing with vector loads -- we allow
/// more than one use if the load is a vector type.  Since the values that
/// contribute to the byte ultimately come from the ExtractVectorElements of the
/// Load, we don't care if the Load has uses other than ExtractVectorElements,
/// because those operations are independent from the pattern to be combined.
/// For vector loads, we simply care that the ByteProviders are adjacent
/// positions of the same vector, and their index matches the byte that is being
/// provided. This is captured by the \p VectorIndex algorithm. \p VectorIndex
/// is the index used in an ExtractVectorElement, and \p StartingIndex is the
/// byte position we are trying to provide for the LoadCombine. If these do
/// not match, then we can not combine the vector loads. \p Index uses the
/// byte position we are trying to provide for and is matched against the
/// shl and load size. The \p Index algorithm ensures the requested byte is
/// provided for by the pattern, and the pattern does not over provide bytes.
///
///
/// The supported LoadCombine pattern for vector loads is as follows
///                              or
///                          /        \
///                         or        shl
///                       /     \      |
///                     or      shl   zext
///                   /    \     |     |
///                 shl   zext  zext  EVE*
///                  |     |     |     |
///                 zext  EVE*  EVE*  LOAD
///                  |     |     |
///                 EVE*  LOAD  LOAD
///                  |
///                 LOAD
///
/// *ExtractVectorElement
using SDByteProvider = ByteProvider<SDNode *>;

static std::optional<SDByteProvider>
calculateByteProvider(SDValue Op, unsigned Index, unsigned Depth,
                      std::optional<uint64_t> VectorIndex,
                      unsigned StartingIndex = 0) {

  // Typical i64 by i8 pattern requires recursion up to 8 calls depth
  if (Depth == 10)
    return std::nullopt;

  // Only allow multiple uses if the instruction is a vector load (in which
  // case we will use the load for every ExtractVectorElement)
  if (Depth && !Op.hasOneUse() &&
      (Op.getOpcode() != ISD::LOAD || !Op.getValueType().isVector()))
    return std::nullopt;

  // Fail to combine if we have encountered anything but a LOAD after handling
  // an ExtractVectorElement.
  if (Op.getOpcode() != ISD::LOAD && VectorIndex.has_value())
    return std::nullopt;

  unsigned BitWidth = Op.getValueSizeInBits();
  if (BitWidth % 8 != 0)
    return std::nullopt;
  unsigned ByteWidth = BitWidth / 8;
  assert(Index < ByteWidth && "invalid index requested");
  (void) ByteWidth;

  switch (Op.getOpcode()) {
  case ISD::OR: {
    auto LHS =
        calculateByteProvider(Op->getOperand(0), Index, Depth + 1, VectorIndex);
    if (!LHS)
      return std::nullopt;
    auto RHS =
        calculateByteProvider(Op->getOperand(1), Index, Depth + 1, VectorIndex);
    if (!RHS)
      return std::nullopt;

    if (LHS->isConstantZero())
      return RHS;
    if (RHS->isConstantZero())
      return LHS;
    return std::nullopt;
  }
  case ISD::SHL: {
    auto ShiftOp = dyn_cast<ConstantSDNode>(Op->getOperand(1));
    if (!ShiftOp)
      return std::nullopt;

    uint64_t BitShift = ShiftOp->getZExtValue();

    if (BitShift % 8 != 0)
      return std::nullopt;
    uint64_t ByteShift = BitShift / 8;

    // If we are shifting by an amount greater than the index we are trying to
    // provide, then do not provide anything. Otherwise, subtract the index by
    // the amount we shifted by.
    return Index < ByteShift
               ? SDByteProvider::getConstantZero()
               : calculateByteProvider(Op->getOperand(0), Index - ByteShift,
                                       Depth + 1, VectorIndex, Index);
  }
  case ISD::ANY_EXTEND:
  case ISD::SIGN_EXTEND:
  case ISD::ZERO_EXTEND: {
    SDValue NarrowOp = Op->getOperand(0);
    unsigned NarrowBitWidth = NarrowOp.getScalarValueSizeInBits();
    if (NarrowBitWidth % 8 != 0)
      return std::nullopt;
    uint64_t NarrowByteWidth = NarrowBitWidth / 8;

    if (Index >= NarrowByteWidth)
      return Op.getOpcode() == ISD::ZERO_EXTEND
                 ? std::optional<SDByteProvider>(
                       SDByteProvider::getConstantZero())
                 : std::nullopt;
    return calculateByteProvider(NarrowOp, Index, Depth + 1, VectorIndex,
                                 StartingIndex);
  }
  case ISD::BSWAP:
    return calculateByteProvider(Op->getOperand(0), ByteWidth - Index - 1,
                                 Depth + 1, VectorIndex, StartingIndex);
  case ISD::EXTRACT_VECTOR_ELT: {
    auto OffsetOp = dyn_cast<ConstantSDNode>(Op->getOperand(1));
    if (!OffsetOp)
      return std::nullopt;

    VectorIndex = OffsetOp->getZExtValue();

    SDValue NarrowOp = Op->getOperand(0);
    unsigned NarrowBitWidth = NarrowOp.getScalarValueSizeInBits();
    if (NarrowBitWidth % 8 != 0)
      return std::nullopt;
    uint64_t NarrowByteWidth = NarrowBitWidth / 8;
    // EXTRACT_VECTOR_ELT can extend the element type to the width of the return
    // type, leaving the high bits undefined.
    if (Index >= NarrowByteWidth)
      return std::nullopt;

    // Check to see if the position of the element in the vector corresponds
    // with the byte we are trying to provide for. In the case of a vector of
    // i8, this simply means the VectorIndex == StartingIndex. For non i8 cases,
    // the element will provide a range of bytes. For example, if we have a
    // vector of i16s, each element provides two bytes (V[1] provides byte 2 and
    // 3).
    if (*VectorIndex * NarrowByteWidth > StartingIndex)
      return std::nullopt;
    if ((*VectorIndex + 1) * NarrowByteWidth <= StartingIndex)
      return std::nullopt;

    return calculateByteProvider(Op->getOperand(0), Index, Depth + 1,
                                 VectorIndex, StartingIndex);
  }
  case ISD::LOAD: {
    auto L = cast<LoadSDNode>(Op.getNode());
    if (!L->isSimple() || L->isIndexed())
      return std::nullopt;

    unsigned NarrowBitWidth = L->getMemoryVT().getSizeInBits();
    if (NarrowBitWidth % 8 != 0)
      return std::nullopt;
    uint64_t NarrowByteWidth = NarrowBitWidth / 8;

    // If the width of the load does not reach byte we are trying to provide for
    // and it is not a ZEXTLOAD, then the load does not provide for the byte in
    // question
    if (Index >= NarrowByteWidth)
      return L->getExtensionType() == ISD::ZEXTLOAD
                 ? std::optional<SDByteProvider>(
                       SDByteProvider::getConstantZero())
                 : std::nullopt;

    unsigned BPVectorIndex = VectorIndex.value_or(0U);
    return SDByteProvider::getSrc(L, Index, BPVectorIndex);
  }
  }

  return std::nullopt;
}

static unsigned littleEndianByteAt(unsigned BW, unsigned i) {
  return i;
}

static unsigned bigEndianByteAt(unsigned BW, unsigned i) {
  return BW - i - 1;
}

// Check if the bytes offsets we are looking at match with either big or
// little endian value loaded. Return true for big endian, false for little
// endian, and std::nullopt if match failed.
static std::optional<bool> isBigEndian(const ArrayRef<int64_t> ByteOffsets,
                                       int64_t FirstOffset) {
  // The endian can be decided only when it is 2 bytes at least.
  unsigned Width = ByteOffsets.size();
  if (Width < 2)
    return std::nullopt;

  bool BigEndian = true, LittleEndian = true;
  for (unsigned i = 0; i < Width; i++) {
    int64_t CurrentByteOffset = ByteOffsets[i] - FirstOffset;
    LittleEndian &= CurrentByteOffset == littleEndianByteAt(Width, i);
    BigEndian &= CurrentByteOffset == bigEndianByteAt(Width, i);
    if (!BigEndian && !LittleEndian)
      return std::nullopt;
  }

  assert((BigEndian != LittleEndian) && "It should be either big endian or"
                                        "little endian");
  return BigEndian;
}

// Look through one layer of truncate or extend.
static SDValue stripTruncAndExt(SDValue Value) {
  switch (Value.getOpcode()) {
  case ISD::TRUNCATE:
  case ISD::ZERO_EXTEND:
  case ISD::SIGN_EXTEND:
  case ISD::ANY_EXTEND:
    return Value.getOperand(0);
  }
  return SDValue();
}

/// Match a pattern where a wide type scalar value is stored by several narrow
/// stores. Fold it into a single store or a BSWAP and a store if the targets
/// supports it.
///
/// Assuming little endian target:
///  i8 *p = ...
///  i32 val = ...
///  p[0] = (val >> 0) & 0xFF;
///  p[1] = (val >> 8) & 0xFF;
///  p[2] = (val >> 16) & 0xFF;
///  p[3] = (val >> 24) & 0xFF;
/// =>
///  *((i32)p) = val;
///
///  i8 *p = ...
///  i32 val = ...
///  p[0] = (val >> 24) & 0xFF;
///  p[1] = (val >> 16) & 0xFF;
///  p[2] = (val >> 8) & 0xFF;
///  p[3] = (val >> 0) & 0xFF;
/// =>
///  *((i32)p) = BSWAP(val);
SDValue DAGCombiner::mergeTruncStores(StoreSDNode *N) {
  // The matching looks for "store (trunc x)" patterns that appear early but are
  // likely to be replaced by truncating store nodes during combining.
  // TODO: If there is evidence that running this later would help, this
  //       limitation could be removed. Legality checks may need to be added
  //       for the created store and optional bswap/rotate.
  if (LegalOperations || OptLevel == CodeGenOptLevel::None)
    return SDValue();

  // We only handle merging simple stores of 1-4 bytes.
  // TODO: Allow unordered atomics when wider type is legal (see D66309)
  EVT MemVT = N->getMemoryVT();
  if (!(MemVT == MVT::i8 || MemVT == MVT::i16 || MemVT == MVT::i32) ||
      !N->isSimple() || N->isIndexed())
    return SDValue();

  // Collect all of the stores in the chain, upto the maximum store width (i64).
  SDValue Chain = N->getChain();
  SmallVector<StoreSDNode *, 8> Stores = {N};
  unsigned NarrowNumBits = MemVT.getScalarSizeInBits();
  unsigned MaxWideNumBits = 64;
  unsigned MaxStores = MaxWideNumBits / NarrowNumBits;
  while (auto *Store = dyn_cast<StoreSDNode>(Chain)) {
    // All stores must be the same size to ensure that we are writing all of the
    // bytes in the wide value.
    // This store should have exactly one use as a chain operand for another
    // store in the merging set. If there are other chain uses, then the
    // transform may not be safe because order of loads/stores outside of this
    // set may not be preserved.
    // TODO: We could allow multiple sizes by tracking each stored byte.
    if (Store->getMemoryVT() != MemVT || !Store->isSimple() ||
        Store->isIndexed() || !Store->hasOneUse())
      return SDValue();
    Stores.push_back(Store);
    Chain = Store->getChain();
    if (MaxStores < Stores.size())
      return SDValue();
  }
  // There is no reason to continue if we do not have at least a pair of stores.
  if (Stores.size() < 2)
    return SDValue();

  // Handle simple types only.
  LLVMContext &Context = *DAG.getContext();
  unsigned NumStores = Stores.size();
  unsigned WideNumBits = NumStores * NarrowNumBits;
  EVT WideVT = EVT::getIntegerVT(Context, WideNumBits);
  if (WideVT != MVT::i16 && WideVT != MVT::i32 && WideVT != MVT::i64)
    return SDValue();

  // Check if all bytes of the source value that we are looking at are stored
  // to the same base address. Collect offsets from Base address into OffsetMap.
  SDValue SourceValue;
  SmallVector<int64_t, 8> OffsetMap(NumStores, INT64_MAX);
  int64_t FirstOffset = INT64_MAX;
  StoreSDNode *FirstStore = nullptr;
  std::optional<BaseIndexOffset> Base;
  for (auto *Store : Stores) {
    // All the stores store different parts of the CombinedValue. A truncate is
    // required to get the partial value.
    SDValue Trunc = Store->getValue();
    if (Trunc.getOpcode() != ISD::TRUNCATE)
      return SDValue();
    // Other than the first/last part, a shift operation is required to get the
    // offset.
    int64_t Offset = 0;
    SDValue WideVal = Trunc.getOperand(0);
    if ((WideVal.getOpcode() == ISD::SRL || WideVal.getOpcode() == ISD::SRA) &&
        isa<ConstantSDNode>(WideVal.getOperand(1))) {
      // The shift amount must be a constant multiple of the narrow type.
      // It is translated to the offset address in the wide source value "y".
      //
      // x = srl y, ShiftAmtC
      // i8 z = trunc x
      // store z, ...
      uint64_t ShiftAmtC = WideVal.getConstantOperandVal(1);
      if (ShiftAmtC % NarrowNumBits != 0)
        return SDValue();

      // Make sure we aren't reading bits that are shifted in.
      if (ShiftAmtC > WideVal.getScalarValueSizeInBits() - NarrowNumBits)
        return SDValue();

      Offset = ShiftAmtC / NarrowNumBits;
      WideVal = WideVal.getOperand(0);
    }

    // Stores must share the same source value with different offsets.
    if (!SourceValue)
      SourceValue = WideVal;
    else if (SourceValue != WideVal) {
      // Truncate and extends can be stripped to see if the values are related.
      if (stripTruncAndExt(SourceValue) != WideVal &&
          stripTruncAndExt(WideVal) != SourceValue)
        return SDValue();

      if (WideVal.getScalarValueSizeInBits() >
          SourceValue.getScalarValueSizeInBits())
        SourceValue = WideVal;

      // Give up if the source value type is smaller than the store size.
      if (SourceValue.getScalarValueSizeInBits() < WideVT.getScalarSizeInBits())
        return SDValue();
    }

    // Stores must share the same base address.
    BaseIndexOffset Ptr = BaseIndexOffset::match(Store, DAG);
    int64_t ByteOffsetFromBase = 0;
    if (!Base)
      Base = Ptr;
    else if (!Base->equalBaseIndex(Ptr, DAG, ByteOffsetFromBase))
      return SDValue();

    // Remember the first store.
    if (ByteOffsetFromBase < FirstOffset) {
      FirstStore = Store;
      FirstOffset = ByteOffsetFromBase;
    }
    // Map the offset in the store and the offset in the combined value, and
    // early return if it has been set before.
    if (Offset < 0 || Offset >= NumStores || OffsetMap[Offset] != INT64_MAX)
      return SDValue();
    OffsetMap[Offset] = ByteOffsetFromBase;
  }

  assert(FirstOffset != INT64_MAX && "First byte offset must be set");
  assert(FirstStore && "First store must be set");

  // Check that a store of the wide type is both allowed and fast on the target
  const DataLayout &Layout = DAG.getDataLayout();
  unsigned Fast = 0;
  bool Allowed = TLI.allowsMemoryAccess(Context, Layout, WideVT,
                                        *FirstStore->getMemOperand(), &Fast);
  if (!Allowed || !Fast)
    return SDValue();

  // Check if the pieces of the value are going to the expected places in memory
  // to merge the stores.
  auto checkOffsets = [&](bool MatchLittleEndian) {
    if (MatchLittleEndian) {
      for (unsigned i = 0; i != NumStores; ++i)
        if (OffsetMap[i] != i * (NarrowNumBits / 8) + FirstOffset)
          return false;
    } else { // MatchBigEndian by reversing loop counter.
      for (unsigned i = 0, j = NumStores - 1; i != NumStores; ++i, --j)
        if (OffsetMap[j] != i * (NarrowNumBits / 8) + FirstOffset)
          return false;
    }
    return true;
  };

  // Check if the offsets line up for the native data layout of this target.
  bool NeedBswap = false;
  bool NeedRotate = false;
  if (!checkOffsets(Layout.isLittleEndian())) {
    // Special-case: check if byte offsets line up for the opposite endian.
    if (NarrowNumBits == 8 && checkOffsets(Layout.isBigEndian()))
      NeedBswap = true;
    else if (NumStores == 2 && checkOffsets(Layout.isBigEndian()))
      NeedRotate = true;
    else
      return SDValue();
  }

  SDLoc DL(N);
  if (WideVT != SourceValue.getValueType()) {
    assert(SourceValue.getValueType().getScalarSizeInBits() > WideNumBits &&
           "Unexpected store value to merge");
    SourceValue = DAG.getNode(ISD::TRUNCATE, DL, WideVT, SourceValue);
  }

  // Before legalize we can introduce illegal bswaps/rotates which will be later
  // converted to an explicit bswap sequence. This way we end up with a single
  // store and byte shuffling instead of several stores and byte shuffling.
  if (NeedBswap) {
    SourceValue = DAG.getNode(ISD::BSWAP, DL, WideVT, SourceValue);
  } else if (NeedRotate) {
    assert(WideNumBits % 2 == 0 && "Unexpected type for rotate");
    SDValue RotAmt = DAG.getConstant(WideNumBits / 2, DL, WideVT);
    SourceValue = DAG.getNode(ISD::ROTR, DL, WideVT, SourceValue, RotAmt);
  }

  SDValue NewStore =
      DAG.getStore(Chain, DL, SourceValue, FirstStore->getBasePtr(),
                   FirstStore->getPointerInfo(), FirstStore->getAlign());

  // Rely on other DAG combine rules to remove the other individual stores.
  DAG.ReplaceAllUsesWith(N, NewStore.getNode());
  return NewStore;
}

/// Match a pattern where a wide type scalar value is loaded by several narrow
/// loads and combined by shifts and ors. Fold it into a single load or a load
/// and a BSWAP if the targets supports it.
///
/// Assuming little endian target:
///  i8 *a = ...
///  i32 val = a[0] | (a[1] << 8) | (a[2] << 16) | (a[3] << 24)
/// =>
///  i32 val = *((i32)a)
///
///  i8 *a = ...
///  i32 val = (a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]
/// =>
///  i32 val = BSWAP(*((i32)a))
///
/// TODO: This rule matches complex patterns with OR node roots and doesn't
/// interact well with the worklist mechanism. When a part of the pattern is
/// updated (e.g. one of the loads) its direct users are put into the worklist,
/// but the root node of the pattern which triggers the load combine is not
/// necessarily a direct user of the changed node. For example, once the address
/// of t28 load is reassociated load combine won't be triggered:
///             t25: i32 = add t4, Constant:i32<2>
///           t26: i64 = sign_extend t25
///        t27: i64 = add t2, t26
///       t28: i8,ch = load<LD1[%tmp9]> t0, t27, undef:i64
///     t29: i32 = zero_extend t28
///   t32: i32 = shl t29, Constant:i8<8>
/// t33: i32 = or t23, t32
/// As a possible fix visitLoad can check if the load can be a part of a load
/// combine pattern and add corresponding OR roots to the worklist.
SDValue DAGCombiner::MatchLoadCombine(SDNode *N) {
  assert(N->getOpcode() == ISD::OR &&
         "Can only match load combining against OR nodes");

  // Handles simple types only
  EVT VT = N->getValueType(0);
  if (VT != MVT::i16 && VT != MVT::i32 && VT != MVT::i64)
    return SDValue();
  unsigned ByteWidth = VT.getSizeInBits() / 8;

  bool IsBigEndianTarget = DAG.getDataLayout().isBigEndian();
  auto MemoryByteOffset = [&](SDByteProvider P) {
    assert(P.hasSrc() && "Must be a memory byte provider");
    auto *Load = cast<LoadSDNode>(P.Src.value());

    unsigned LoadBitWidth = Load->getMemoryVT().getScalarSizeInBits();

    assert(LoadBitWidth % 8 == 0 &&
           "can only analyze providers for individual bytes not bit");
    unsigned LoadByteWidth = LoadBitWidth / 8;
    return IsBigEndianTarget ? bigEndianByteAt(LoadByteWidth, P.DestOffset)
                             : littleEndianByteAt(LoadByteWidth, P.DestOffset);
  };

  std::optional<BaseIndexOffset> Base;
  SDValue Chain;

  SmallPtrSet<LoadSDNode *, 8> Loads;
  std::optional<SDByteProvider> FirstByteProvider;
  int64_t FirstOffset = INT64_MAX;

  // Check if all the bytes of the OR we are looking at are loaded from the same
  // base address. Collect bytes offsets from Base address in ByteOffsets.
  SmallVector<int64_t, 8> ByteOffsets(ByteWidth);
  unsigned ZeroExtendedBytes = 0;
  for (int i = ByteWidth - 1; i >= 0; --i) {
    auto P =
        calculateByteProvider(SDValue(N, 0), i, 0, /*VectorIndex*/ std::nullopt,
                              /*StartingIndex*/ i);
    if (!P)
      return SDValue();

    if (P->isConstantZero()) {
      // It's OK for the N most significant bytes to be 0, we can just
      // zero-extend the load.
      if (++ZeroExtendedBytes != (ByteWidth - static_cast<unsigned>(i)))
        return SDValue();
      continue;
    }
    assert(P->hasSrc() && "provenance should either be memory or zero");
    auto *L = cast<LoadSDNode>(P->Src.value());

    // All loads must share the same chain
    SDValue LChain = L->getChain();
    if (!Chain)
      Chain = LChain;
    else if (Chain != LChain)
      return SDValue();

    // Loads must share the same base address
    BaseIndexOffset Ptr = BaseIndexOffset::match(L, DAG);
    int64_t ByteOffsetFromBase = 0;

    // For vector loads, the expected load combine pattern will have an
    // ExtractElement for each index in the vector. While each of these
    // ExtractElements will be accessing the same base address as determined
    // by the load instruction, the actual bytes they interact with will differ
    // due to different ExtractElement indices. To accurately determine the
    // byte position of an ExtractElement, we offset the base load ptr with
    // the index multiplied by the byte size of each element in the vector.
    if (L->getMemoryVT().isVector()) {
      unsigned LoadWidthInBit = L->getMemoryVT().getScalarSizeInBits();
      if (LoadWidthInBit % 8 != 0)
        return SDValue();
      unsigned ByteOffsetFromVector = P->SrcOffset * LoadWidthInBit / 8;
      Ptr.addToOffset(ByteOffsetFromVector);
    }

    if (!Base)
      Base = Ptr;

    else if (!Base->equalBaseIndex(Ptr, DAG, ByteOffsetFromBase))
      return SDValue();

    // Calculate the offset of the current byte from the base address
    ByteOffsetFromBase += MemoryByteOffset(*P);
    ByteOffsets[i] = ByteOffsetFromBase;

    // Remember the first byte load
    if (ByteOffsetFromBase < FirstOffset) {
      FirstByteProvider = P;
      FirstOffset = ByteOffsetFromBase;
    }

    Loads.insert(L);
  }

  assert(!Loads.empty() && "All the bytes of the value must be loaded from "
         "memory, so there must be at least one load which produces the value");
  assert(Base && "Base address of the accessed memory location must be set");
  assert(FirstOffset != INT64_MAX && "First byte offset must be set");

  bool NeedsZext = ZeroExtendedBytes > 0;

  EVT MemVT =
      EVT::getIntegerVT(*DAG.getContext(), (ByteWidth - ZeroExtendedBytes) * 8);

  if (!MemVT.isSimple())
    return SDValue();

  // Before legalize we can introduce too wide illegal loads which will be later
  // split into legal sized loads. This enables us to combine i64 load by i8
  // patterns to a couple of i32 loads on 32 bit targets.
  if (LegalOperations &&
      !TLI.isOperationLegal(NeedsZext ? ISD::ZEXTLOAD : ISD::NON_EXTLOAD,
                            MemVT))
    return SDValue();

  // Check if the bytes of the OR we are looking at match with either big or
  // little endian value load
  std::optional<bool> IsBigEndian = isBigEndian(
      ArrayRef(ByteOffsets).drop_back(ZeroExtendedBytes), FirstOffset);
  if (!IsBigEndian)
    return SDValue();

  assert(FirstByteProvider && "must be set");

  // Ensure that the first byte is loaded from zero offset of the first load.
  // So the combined value can be loaded from the first load address.
  if (MemoryByteOffset(*FirstByteProvider) != 0)
    return SDValue();
  auto *FirstLoad = cast<LoadSDNode>(FirstByteProvider->Src.value());

  // The node we are looking at matches with the pattern, check if we can
  // replace it with a single (possibly zero-extended) load and bswap + shift if
  // needed.

  // If the load needs byte swap check if the target supports it
  bool NeedsBswap = IsBigEndianTarget != *IsBigEndian;

  // Before legalize we can introduce illegal bswaps which will be later
  // converted to an explicit bswap sequence. This way we end up with a single
  // load and byte shuffling instead of several loads and byte shuffling.
  // We do not introduce illegal bswaps when zero-extending as this tends to
  // introduce too many arithmetic instructions.
  if (NeedsBswap && (LegalOperations || NeedsZext) &&
      !TLI.isOperationLegal(ISD::BSWAP, VT))
    return SDValue();

  // If we need to bswap and zero extend, we have to insert a shift. Check that
  // it is legal.
  if (NeedsBswap && NeedsZext && LegalOperations &&
      !TLI.isOperationLegal(ISD::SHL, VT))
    return SDValue();

  // Check that a load of the wide type is both allowed and fast on the target
  unsigned Fast = 0;
  bool Allowed =
      TLI.allowsMemoryAccess(*DAG.getContext(), DAG.getDataLayout(), MemVT,
                             *FirstLoad->getMemOperand(), &Fast);
  if (!Allowed || !Fast)
    return SDValue();

  SDValue NewLoad =
      DAG.getExtLoad(NeedsZext ? ISD::ZEXTLOAD : ISD::NON_EXTLOAD, SDLoc(N), VT,
                     Chain, FirstLoad->getBasePtr(),
                     FirstLoad->getPointerInfo(), MemVT, FirstLoad->getAlign());

  // Transfer chain users from old loads to the new load.
  for (LoadSDNode *L : Loads)
    DAG.makeEquivalentMemoryOrdering(L, NewLoad);

  if (!NeedsBswap)
    return NewLoad;

  SDValue ShiftedLoad =
      NeedsZext ? DAG.getNode(ISD::SHL, SDLoc(N), VT, NewLoad,
                              DAG.getShiftAmountConstant(ZeroExtendedBytes * 8,
                                                         VT, SDLoc(N)))
                : NewLoad;
  return DAG.getNode(ISD::BSWAP, SDLoc(N), VT, ShiftedLoad);
}

// If the target has andn, bsl, or a similar bit-select instruction,
// we want to unfold masked merge, with canonical pattern of:
//   |        A  |  |B|
//   ((x ^ y) & m) ^ y
//    |  D  |
// Into:
//   (x & m) | (y & ~m)
// If y is a constant, m is not a 'not', and the 'andn' does not work with
// immediates, we unfold into a different pattern:
//   ~(~x & m) & (m | y)
// If x is a constant, m is a 'not', and the 'andn' does not work with
// immediates, we unfold into a different pattern:
//   (x | ~m) & ~(~m & ~y)
// NOTE: we don't unfold the pattern if 'xor' is actually a 'not', because at
//       the very least that breaks andnpd / andnps patterns, and because those
//       patterns are simplified in IR and shouldn't be created in the DAG
SDValue DAGCombiner::unfoldMaskedMerge(SDNode *N) {
  assert(N->getOpcode() == ISD::XOR);

  // Don't touch 'not' (i.e. where y = -1).
  if (isAllOnesOrAllOnesSplat(N->getOperand(1)))
    return SDValue();

  EVT VT = N->getValueType(0);

  // There are 3 commutable operators in the pattern,
  // so we have to deal with 8 possible variants of the basic pattern.
  SDValue X, Y, M;
  auto matchAndXor = [&X, &Y, &M](SDValue And, unsigned XorIdx, SDValue Other) {
    if (And.getOpcode() != ISD::AND || !And.hasOneUse())
      return false;
    SDValue Xor = And.getOperand(XorIdx);
    if (Xor.getOpcode() != ISD::XOR || !Xor.hasOneUse())
      return false;
    SDValue Xor0 = Xor.getOperand(0);
    SDValue Xor1 = Xor.getOperand(1);
    // Don't touch 'not' (i.e. where y = -1).
    if (isAllOnesOrAllOnesSplat(Xor1))
      return false;
    if (Other == Xor0)
      std::swap(Xor0, Xor1);
    if (Other != Xor1)
      return false;
    X = Xor0;
    Y = Xor1;
    M = And.getOperand(XorIdx ? 0 : 1);
    return true;
  };

  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  if (!matchAndXor(N0, 0, N1) && !matchAndXor(N0, 1, N1) &&
      !matchAndXor(N1, 0, N0) && !matchAndXor(N1, 1, N0))
    return SDValue();

  // Don't do anything if the mask is constant. This should not be reachable.
  // InstCombine should have already unfolded this pattern, and DAGCombiner
  // probably shouldn't produce it, too.
  if (isa<ConstantSDNode>(M.getNode()))
    return SDValue();

  // We can transform if the target has AndNot
  if (!TLI.hasAndNot(M))
    return SDValue();

  SDLoc DL(N);

  // If Y is a constant, check that 'andn' works with immediates. Unless M is
  // a bitwise not that would already allow ANDN to be used.
  if (!TLI.hasAndNot(Y) && !isBitwiseNot(M)) {
    assert(TLI.hasAndNot(X) && "Only mask is a variable? Unreachable.");
    // If not, we need to do a bit more work to make sure andn is still used.
    SDValue NotX = DAG.getNOT(DL, X, VT);
    SDValue LHS = DAG.getNode(ISD::AND, DL, VT, NotX, M);
    SDValue NotLHS = DAG.getNOT(DL, LHS, VT);
    SDValue RHS = DAG.getNode(ISD::OR, DL, VT, M, Y);
    return DAG.getNode(ISD::AND, DL, VT, NotLHS, RHS);
  }

  // If X is a constant and M is a bitwise not, check that 'andn' works with
  // immediates.
  if (!TLI.hasAndNot(X) && isBitwiseNot(M)) {
    assert(TLI.hasAndNot(Y) && "Only mask is a variable? Unreachable.");
    // If not, we need to do a bit more work to make sure andn is still used.
    SDValue NotM = M.getOperand(0);
    SDValue LHS = DAG.getNode(ISD::OR, DL, VT, X, NotM);
    SDValue NotY = DAG.getNOT(DL, Y, VT);
    SDValue RHS = DAG.getNode(ISD::AND, DL, VT, NotM, NotY);
    SDValue NotRHS = DAG.getNOT(DL, RHS, VT);
    return DAG.getNode(ISD::AND, DL, VT, LHS, NotRHS);
  }

  SDValue LHS = DAG.getNode(ISD::AND, DL, VT, X, M);
  SDValue NotM = DAG.getNOT(DL, M, VT);
  SDValue RHS = DAG.getNode(ISD::AND, DL, VT, Y, NotM);

  return DAG.getNode(ISD::OR, DL, VT, LHS, RHS);
}

SDValue DAGCombiner::visitXOR(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N0.getValueType();
  SDLoc DL(N);

  // fold (xor undef, undef) -> 0. This is a common idiom (misuse).
  if (N0.isUndef() && N1.isUndef())
    return DAG.getConstant(0, DL, VT);

  // fold (xor x, undef) -> undef
  if (N0.isUndef())
    return N0;
  if (N1.isUndef())
    return N1;

  // fold (xor c1, c2) -> c1^c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::XOR, DL, VT, {N0, N1}))
    return C;

  // canonicalize constant to RHS
  if (DAG.isConstantIntBuildVectorOrConstantInt(N0) &&
      !DAG.isConstantIntBuildVectorOrConstantInt(N1))
    return DAG.getNode(ISD::XOR, DL, VT, N1, N0);

  // fold vector ops
  if (VT.isVector()) {
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

    // fold (xor x, 0) -> x, vector edition
    if (ISD::isConstantSplatVectorAllZeros(N1.getNode()))
      return N0;
  }

  // fold (xor x, 0) -> x
  if (isNullConstant(N1))
    return N0;

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  // reassociate xor
  if (SDValue RXOR = reassociateOps(ISD::XOR, DL, N0, N1, N->getFlags()))
    return RXOR;

  // Fold xor(vecreduce(x), vecreduce(y)) -> vecreduce(xor(x, y))
  if (SDValue SD =
          reassociateReduction(ISD::VECREDUCE_XOR, ISD::XOR, DL, VT, N0, N1))
    return SD;

  // fold (a^b) -> (a|b) iff a and b share no bits.
  if ((!LegalOperations || TLI.isOperationLegal(ISD::OR, VT)) &&
      DAG.haveNoCommonBitsSet(N0, N1))
    return DAG.getNode(ISD::OR, DL, VT, N0, N1, SDNodeFlags::Disjoint);

  // look for 'add-like' folds:
  // XOR(N0,MIN_SIGNED_VALUE) == ADD(N0,MIN_SIGNED_VALUE)
  if ((!LegalOperations || TLI.isOperationLegal(ISD::ADD, VT)) &&
      isMinSignedConstant(N1))
    if (SDValue Combined = visitADDLike(N))
      return Combined;

  // fold !(x cc y) -> (x !cc y)
  unsigned N0Opcode = N0.getOpcode();
  SDValue LHS, RHS, CC;
  if (TLI.isConstTrueVal(N1) &&
      isSetCCEquivalent(N0, LHS, RHS, CC, /*MatchStrict*/ true)) {
    ISD::CondCode NotCC = ISD::getSetCCInverse(cast<CondCodeSDNode>(CC)->get(),
                                               LHS.getValueType());
    if (!LegalOperations ||
        TLI.isCondCodeLegal(NotCC, LHS.getSimpleValueType())) {
      switch (N0Opcode) {
      default:
        llvm_unreachable("Unhandled SetCC Equivalent!");
      case ISD::SETCC:
        return DAG.getSetCC(SDLoc(N0), VT, LHS, RHS, NotCC);
      case ISD::SELECT_CC:
        return DAG.getSelectCC(SDLoc(N0), LHS, RHS, N0.getOperand(2),
                               N0.getOperand(3), NotCC);
      case ISD::STRICT_FSETCC:
      case ISD::STRICT_FSETCCS: {
        if (N0.hasOneUse()) {
          // FIXME Can we handle multiple uses? Could we token factor the chain
          // results from the new/old setcc?
          SDValue SetCC =
              DAG.getSetCC(SDLoc(N0), VT, LHS, RHS, NotCC,
                           N0.getOperand(0), N0Opcode == ISD::STRICT_FSETCCS);
          CombineTo(N, SetCC);
          DAG.ReplaceAllUsesOfValueWith(N0.getValue(1), SetCC.getValue(1));
          recursivelyDeleteUnusedNodes(N0.getNode());
          return SDValue(N, 0); // Return N so it doesn't get rechecked!
        }
        break;
      }
      }
    }
  }

  // fold (not (zext (setcc x, y))) -> (zext (not (setcc x, y)))
  if (isOneConstant(N1) && N0Opcode == ISD::ZERO_EXTEND && N0.hasOneUse() &&
      isSetCCEquivalent(N0.getOperand(0), LHS, RHS, CC)){
    SDValue V = N0.getOperand(0);
    SDLoc DL0(N0);
    V = DAG.getNode(ISD::XOR, DL0, V.getValueType(), V,
                    DAG.getConstant(1, DL0, V.getValueType()));
    AddToWorklist(V.getNode());
    return DAG.getNode(ISD::ZERO_EXTEND, DL, VT, V);
  }

  // fold (not (or x, y)) -> (and (not x), (not y)) iff x or y are setcc
  // fold (not (and x, y)) -> (or (not x), (not y)) iff x or y are setcc
  if (isOneConstant(N1) && VT == MVT::i1 && N0.hasOneUse() &&
      (N0Opcode == ISD::OR || N0Opcode == ISD::AND)) {
    SDValue N00 = N0.getOperand(0), N01 = N0.getOperand(1);
    if (isOneUseSetCC(N01) || isOneUseSetCC(N00)) {
      unsigned NewOpcode = N0Opcode == ISD::AND ? ISD::OR : ISD::AND;
      N00 = DAG.getNode(ISD::XOR, SDLoc(N00), VT, N00, N1); // N00 = ~N00
      N01 = DAG.getNode(ISD::XOR, SDLoc(N01), VT, N01, N1); // N01 = ~N01
      AddToWorklist(N00.getNode()); AddToWorklist(N01.getNode());
      return DAG.getNode(NewOpcode, DL, VT, N00, N01);
    }
  }
  // fold (not (or x, y)) -> (and (not x), (not y)) iff x or y are constants
  // fold (not (and x, y)) -> (or (not x), (not y)) iff x or y are constants
  if (isAllOnesConstant(N1) && N0.hasOneUse() &&
      (N0Opcode == ISD::OR || N0Opcode == ISD::AND)) {
    SDValue N00 = N0.getOperand(0), N01 = N0.getOperand(1);
    if (isa<ConstantSDNode>(N01) || isa<ConstantSDNode>(N00)) {
      unsigned NewOpcode = N0Opcode == ISD::AND ? ISD::OR : ISD::AND;
      N00 = DAG.getNode(ISD::XOR, SDLoc(N00), VT, N00, N1); // N00 = ~N00
      N01 = DAG.getNode(ISD::XOR, SDLoc(N01), VT, N01, N1); // N01 = ~N01
      AddToWorklist(N00.getNode()); AddToWorklist(N01.getNode());
      return DAG.getNode(NewOpcode, DL, VT, N00, N01);
    }
  }

  // fold (not (neg x)) -> (add X, -1)
  // FIXME: This can be generalized to (not (sub Y, X)) -> (add X, ~Y) if
  // Y is a constant or the subtract has a single use.
  if (isAllOnesConstant(N1) && N0.getOpcode() == ISD::SUB &&
      isNullConstant(N0.getOperand(0))) {
    return DAG.getNode(ISD::ADD, DL, VT, N0.getOperand(1),
                       DAG.getAllOnesConstant(DL, VT));
  }

  // fold (not (add X, -1)) -> (neg X)
  if (isAllOnesConstant(N1) && N0.getOpcode() == ISD::ADD &&
      isAllOnesOrAllOnesSplat(N0.getOperand(1))) {
    return DAG.getNegative(N0.getOperand(0), DL, VT);
  }

  // fold (xor (and x, y), y) -> (and (not x), y)
  if (N0Opcode == ISD::AND && N0.hasOneUse() && N0->getOperand(1) == N1) {
    SDValue X = N0.getOperand(0);
    SDValue NotX = DAG.getNOT(SDLoc(X), X, VT);
    AddToWorklist(NotX.getNode());
    return DAG.getNode(ISD::AND, DL, VT, NotX, N1);
  }

  // fold Y = sra (X, size(X)-1); xor (add (X, Y), Y) -> (abs X)
  if (!LegalOperations || hasOperation(ISD::ABS, VT)) {
    SDValue A = N0Opcode == ISD::ADD ? N0 : N1;
    SDValue S = N0Opcode == ISD::SRA ? N0 : N1;
    if (A.getOpcode() == ISD::ADD && S.getOpcode() == ISD::SRA) {
      SDValue A0 = A.getOperand(0), A1 = A.getOperand(1);
      SDValue S0 = S.getOperand(0);
      if ((A0 == S && A1 == S0) || (A1 == S && A0 == S0))
        if (ConstantSDNode *C = isConstOrConstSplat(S.getOperand(1)))
          if (C->getAPIntValue() == (VT.getScalarSizeInBits() - 1))
            return DAG.getNode(ISD::ABS, DL, VT, S0);
    }
  }

  // fold (xor x, x) -> 0
  if (N0 == N1)
    return tryFoldToZero(DL, TLI, VT, DAG, LegalOperations);

  // fold (xor (shl 1, x), -1) -> (rotl ~1, x)
  // Here is a concrete example of this equivalence:
  // i16   x ==  14
  // i16 shl ==   1 << 14  == 16384 == 0b0100000000000000
  // i16 xor == ~(1 << 14) == 49151 == 0b1011111111111111
  //
  // =>
  //
  // i16     ~1      == 0b1111111111111110
  // i16 rol(~1, 14) == 0b1011111111111111
  //
  // Some additional tips to help conceptualize this transform:
  // - Try to see the operation as placing a single zero in a value of all ones.
  // - There exists no value for x which would allow the result to contain zero.
  // - Values of x larger than the bitwidth are undefined and do not require a
  //   consistent result.
  // - Pushing the zero left requires shifting one bits in from the right.
  // A rotate left of ~1 is a nice way of achieving the desired result.
  if (TLI.isOperationLegalOrCustom(ISD::ROTL, VT) && N0Opcode == ISD::SHL &&
      isAllOnesConstant(N1) && isOneConstant(N0.getOperand(0))) {
    return DAG.getNode(ISD::ROTL, DL, VT, DAG.getSignedConstant(~1, DL, VT),
                       N0.getOperand(1));
  }

  // Simplify: xor (op x...), (op y...)  -> (op (xor x, y))
  if (N0Opcode == N1.getOpcode())
    if (SDValue V = hoistLogicOpWithSameOpcodeHands(N))
      return V;

  if (SDValue R = foldLogicOfShifts(N, N0, N1, DAG))
    return R;
  if (SDValue R = foldLogicOfShifts(N, N1, N0, DAG))
    return R;
  if (SDValue R = foldLogicTreeOfShifts(N, N0, N1, DAG))
    return R;

  // Unfold  ((x ^ y) & m) ^ y  into  (x & m) | (y & ~m)  if profitable
  if (SDValue MM = unfoldMaskedMerge(N))
    return MM;

  // Simplify the expression using non-local knowledge.
  if (SimplifyDemandedBits(SDValue(N, 0)))
    return SDValue(N, 0);

  if (SDValue Combined = combineCarryDiamond(DAG, TLI, N0, N1, N))
    return Combined;

  return SDValue();
}

/// If we have a shift-by-constant of a bitwise logic op that itself has a
/// shift-by-constant operand with identical opcode, we may be able to convert
/// that into 2 independent shifts followed by the logic op. This is a
/// throughput improvement.
static SDValue combineShiftOfShiftedLogic(SDNode *Shift, SelectionDAG &DAG) {
  // Match a one-use bitwise logic op.
  SDValue LogicOp = Shift->getOperand(0);
  if (!LogicOp.hasOneUse())
    return SDValue();

  unsigned LogicOpcode = LogicOp.getOpcode();
  if (LogicOpcode != ISD::AND && LogicOpcode != ISD::OR &&
      LogicOpcode != ISD::XOR)
    return SDValue();

  // Find a matching one-use shift by constant.
  unsigned ShiftOpcode = Shift->getOpcode();
  SDValue C1 = Shift->getOperand(1);
  ConstantSDNode *C1Node = isConstOrConstSplat(C1);
  assert(C1Node && "Expected a shift with constant operand");
  const APInt &C1Val = C1Node->getAPIntValue();
  auto matchFirstShift = [&](SDValue V, SDValue &ShiftOp,
                             const APInt *&ShiftAmtVal) {
    if (V.getOpcode() != ShiftOpcode || !V.hasOneUse())
      return false;

    ConstantSDNode *ShiftCNode = isConstOrConstSplat(V.getOperand(1));
    if (!ShiftCNode)
      return false;

    // Capture the shifted operand and shift amount value.
    ShiftOp = V.getOperand(0);
    ShiftAmtVal = &ShiftCNode->getAPIntValue();

    // Shift amount types do not have to match their operand type, so check that
    // the constants are the same width.
    if (ShiftAmtVal->getBitWidth() != C1Val.getBitWidth())
      return false;

    // The fold is not valid if the sum of the shift values doesn't fit in the
    // given shift amount type.
    bool Overflow = false;
    APInt NewShiftAmt = C1Val.uadd_ov(*ShiftAmtVal, Overflow);
    if (Overflow)
      return false;

    // The fold is not valid if the sum of the shift values exceeds bitwidth.
    if (NewShiftAmt.uge(V.getScalarValueSizeInBits()))
      return false;

    return true;
  };

  // Logic ops are commutative, so check each operand for a match.
  SDValue X, Y;
  const APInt *C0Val;
  if (matchFirstShift(LogicOp.getOperand(0), X, C0Val))
    Y = LogicOp.getOperand(1);
  else if (matchFirstShift(LogicOp.getOperand(1), X, C0Val))
    Y = LogicOp.getOperand(0);
  else
    return SDValue();

  // shift (logic (shift X, C0), Y), C1 -> logic (shift X, C0+C1), (shift Y, C1)
  SDLoc DL(Shift);
  EVT VT = Shift->getValueType(0);
  EVT ShiftAmtVT = Shift->getOperand(1).getValueType();
  SDValue ShiftSumC = DAG.getConstant(*C0Val + C1Val, DL, ShiftAmtVT);
  SDValue NewShift1 = DAG.getNode(ShiftOpcode, DL, VT, X, ShiftSumC);
  SDValue NewShift2 = DAG.getNode(ShiftOpcode, DL, VT, Y, C1);
  return DAG.getNode(LogicOpcode, DL, VT, NewShift1, NewShift2,
                     LogicOp->getFlags());
}

/// Handle transforms common to the three shifts, when the shift amount is a
/// constant.
/// We are looking for: (shift being one of shl/sra/srl)
///   shift (binop X, C0), C1
/// And want to transform into:
///   binop (shift X, C1), (shift C0, C1)
SDValue DAGCombiner::visitShiftByConstant(SDNode *N) {
  assert(isConstOrConstSplat(N->getOperand(1)) && "Expected constant operand");

  // Do not turn a 'not' into a regular xor.
  if (isBitwiseNot(N->getOperand(0)))
    return SDValue();

  // The inner binop must be one-use, since we want to replace it.
  SDValue LHS = N->getOperand(0);
  if (!LHS.hasOneUse() || !TLI.isDesirableToCommuteWithShift(N, Level))
    return SDValue();

  // Fold shift(bitop(shift(x,c1),y), c2) -> bitop(shift(x,c1+c2),shift(y,c2)).
  if (SDValue R = combineShiftOfShiftedLogic(N, DAG))
    return R;

  // We want to pull some binops through shifts, so that we have (and (shift))
  // instead of (shift (and)), likewise for add, or, xor, etc.  This sort of
  // thing happens with address calculations, so it's important to canonicalize
  // it.
  switch (LHS.getOpcode()) {
  default:
    return SDValue();
  case ISD::OR:
  case ISD::XOR:
  case ISD::AND:
    break;
  case ISD::ADD:
    if (N->getOpcode() != ISD::SHL)
      return SDValue(); // only shl(add) not sr[al](add).
    break;
  }

  // FIXME: disable this unless the input to the binop is a shift by a constant
  // or is copy/select. Enable this in other cases when figure out it's exactly
  // profitable.
  SDValue BinOpLHSVal = LHS.getOperand(0);
  bool IsShiftByConstant = (BinOpLHSVal.getOpcode() == ISD::SHL ||
                            BinOpLHSVal.getOpcode() == ISD::SRA ||
                            BinOpLHSVal.getOpcode() == ISD::SRL) &&
                           isa<ConstantSDNode>(BinOpLHSVal.getOperand(1));
  bool IsCopyOrSelect = BinOpLHSVal.getOpcode() == ISD::CopyFromReg ||
                        BinOpLHSVal.getOpcode() == ISD::SELECT;

  if (!IsShiftByConstant && !IsCopyOrSelect)
    return SDValue();

  if (IsCopyOrSelect && N->hasOneUse())
    return SDValue();

  // Attempt to fold the constants, shifting the binop RHS by the shift amount.
  SDLoc DL(N);
  EVT VT = N->getValueType(0);
  if (SDValue NewRHS = DAG.FoldConstantArithmetic(
          N->getOpcode(), DL, VT, {LHS.getOperand(1), N->getOperand(1)})) {
    SDValue NewShift = DAG.getNode(N->getOpcode(), DL, VT, LHS.getOperand(0),
                                   N->getOperand(1));
    return DAG.getNode(LHS.getOpcode(), DL, VT, NewShift, NewRHS);
  }

  return SDValue();
}

SDValue DAGCombiner::distributeTruncateThroughAnd(SDNode *N) {
  assert(N->getOpcode() == ISD::TRUNCATE);
  assert(N->getOperand(0).getOpcode() == ISD::AND);

  // (truncate:TruncVT (and N00, N01C)) -> (and (truncate:TruncVT N00), TruncC)
  EVT TruncVT = N->getValueType(0);
  if (N->hasOneUse() && N->getOperand(0).hasOneUse() &&
      TLI.isTypeDesirableForOp(ISD::AND, TruncVT)) {
    SDValue N01 = N->getOperand(0).getOperand(1);
    if (isConstantOrConstantVector(N01, /* NoOpaques */ true)) {
      SDLoc DL(N);
      SDValue N00 = N->getOperand(0).getOperand(0);
      SDValue Trunc00 = DAG.getNode(ISD::TRUNCATE, DL, TruncVT, N00);
      SDValue Trunc01 = DAG.getNode(ISD::TRUNCATE, DL, TruncVT, N01);
      AddToWorklist(Trunc00.getNode());
      AddToWorklist(Trunc01.getNode());
      return DAG.getNode(ISD::AND, DL, TruncVT, Trunc00, Trunc01);
    }
  }

  return SDValue();
}

SDValue DAGCombiner::visitRotate(SDNode *N) {
  SDLoc dl(N);
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  unsigned Bitsize = VT.getScalarSizeInBits();

  // fold (rot x, 0) -> x
  if (isNullOrNullSplat(N1))
    return N0;

  // fold (rot x, c) -> x iff (c % BitSize) == 0
  if (isPowerOf2_32(Bitsize) && Bitsize > 1) {
    APInt ModuloMask(N1.getScalarValueSizeInBits(), Bitsize - 1);
    if (DAG.MaskedValueIsZero(N1, ModuloMask))
      return N0;
  }

  // fold (rot x, c) -> (rot x, c % BitSize)
  bool OutOfRange = false;
  auto MatchOutOfRange = [Bitsize, &OutOfRange](ConstantSDNode *C) {
    OutOfRange |= C->getAPIntValue().uge(Bitsize);
    return true;
  };
  if (ISD::matchUnaryPredicate(N1, MatchOutOfRange) && OutOfRange) {
    EVT AmtVT = N1.getValueType();
    SDValue Bits = DAG.getConstant(Bitsize, dl, AmtVT);
    if (SDValue Amt =
            DAG.FoldConstantArithmetic(ISD::UREM, dl, AmtVT, {N1, Bits}))
      return DAG.getNode(N->getOpcode(), dl, VT, N0, Amt);
  }

  // rot i16 X, 8 --> bswap X
  auto *RotAmtC = isConstOrConstSplat(N1);
  if (RotAmtC && RotAmtC->getAPIntValue() == 8 &&
      VT.getScalarSizeInBits() == 16 && hasOperation(ISD::BSWAP, VT))
    return DAG.getNode(ISD::BSWAP, dl, VT, N0);

  // Simplify the operands using demanded-bits information.
  if (SimplifyDemandedBits(SDValue(N, 0)))
    return SDValue(N, 0);

  // fold (rot* x, (trunc (and y, c))) -> (rot* x, (and (trunc y), (trunc c))).
  if (N1.getOpcode() == ISD::TRUNCATE &&
      N1.getOperand(0).getOpcode() == ISD::AND) {
    if (SDValue NewOp1 = distributeTruncateThroughAnd(N1.getNode()))
      return DAG.getNode(N->getOpcode(), dl, VT, N0, NewOp1);
  }

  unsigned NextOp = N0.getOpcode();

  // fold (rot* (rot* x, c2), c1)
  //   -> (rot* x, ((c1 % bitsize) +- (c2 % bitsize) + bitsize) % bitsize)
  if (NextOp == ISD::ROTL || NextOp == ISD::ROTR) {
    bool C1 = DAG.isConstantIntBuildVectorOrConstantInt(N1);
    bool C2 = DAG.isConstantIntBuildVectorOrConstantInt(N0.getOperand(1));
    if (C1 && C2 && N1.getValueType() == N0.getOperand(1).getValueType()) {
      EVT ShiftVT = N1.getValueType();
      bool SameSide = (N->getOpcode() == NextOp);
      unsigned CombineOp = SameSide ? ISD::ADD : ISD::SUB;
      SDValue BitsizeC = DAG.getConstant(Bitsize, dl, ShiftVT);
      SDValue Norm1 = DAG.FoldConstantArithmetic(ISD::UREM, dl, ShiftVT,
                                                 {N1, BitsizeC});
      SDValue Norm2 = DAG.FoldConstantArithmetic(ISD::UREM, dl, ShiftVT,
                                                 {N0.getOperand(1), BitsizeC});
      if (Norm1 && Norm2)
        if (SDValue CombinedShift = DAG.FoldConstantArithmetic(
                CombineOp, dl, ShiftVT, {Norm1, Norm2})) {
          CombinedShift = DAG.FoldConstantArithmetic(ISD::ADD, dl, ShiftVT,
                                                     {CombinedShift, BitsizeC});
          SDValue CombinedShiftNorm = DAG.FoldConstantArithmetic(
              ISD::UREM, dl, ShiftVT, {CombinedShift, BitsizeC});
          return DAG.getNode(N->getOpcode(), dl, VT, N0->getOperand(0),
                             CombinedShiftNorm);
        }
    }
  }
  return SDValue();
}

SDValue DAGCombiner::visitSHL(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  if (SDValue V = DAG.simplifyShift(N0, N1))
    return V;

  SDLoc DL(N);
  EVT VT = N0.getValueType();
  EVT ShiftVT = N1.getValueType();
  unsigned OpSizeInBits = VT.getScalarSizeInBits();

  // fold (shl c1, c2) -> c1<<c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::SHL, DL, VT, {N0, N1}))
    return C;

  // fold vector ops
  if (VT.isVector()) {
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

    BuildVectorSDNode *N1CV = dyn_cast<BuildVectorSDNode>(N1);
    // If setcc produces all-one true value then:
    // (shl (and (setcc) N01CV) N1CV) -> (and (setcc) N01CV<<N1CV)
    if (N1CV && N1CV->isConstant()) {
      if (N0.getOpcode() == ISD::AND) {
        SDValue N00 = N0->getOperand(0);
        SDValue N01 = N0->getOperand(1);
        BuildVectorSDNode *N01CV = dyn_cast<BuildVectorSDNode>(N01);

        if (N01CV && N01CV->isConstant() && N00.getOpcode() == ISD::SETCC &&
            TLI.getBooleanContents(N00.getOperand(0).getValueType()) ==
                TargetLowering::ZeroOrNegativeOneBooleanContent) {
          if (SDValue C =
                  DAG.FoldConstantArithmetic(ISD::SHL, DL, VT, {N01, N1}))
            return DAG.getNode(ISD::AND, DL, VT, N00, C);
        }
      }
    }
  }

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  // if (shl x, c) is known to be zero, return 0
  if (DAG.MaskedValueIsZero(SDValue(N, 0), APInt::getAllOnes(OpSizeInBits)))
    return DAG.getConstant(0, DL, VT);

  // fold (shl x, (trunc (and y, c))) -> (shl x, (and (trunc y), (trunc c))).
  if (N1.getOpcode() == ISD::TRUNCATE &&
      N1.getOperand(0).getOpcode() == ISD::AND) {
    if (SDValue NewOp1 = distributeTruncateThroughAnd(N1.getNode()))
      return DAG.getNode(ISD::SHL, DL, VT, N0, NewOp1);
  }

  // fold (shl (shl x, c1), c2) -> 0 or (shl x, (add c1, c2))
  if (N0.getOpcode() == ISD::SHL) {
    auto MatchOutOfRange = [OpSizeInBits](ConstantSDNode *LHS,
                                          ConstantSDNode *RHS) {
      APInt c1 = LHS->getAPIntValue();
      APInt c2 = RHS->getAPIntValue();
      zeroExtendToMatch(c1, c2, 1 /* Overflow Bit */);
      return (c1 + c2).uge(OpSizeInBits);
    };
    if (ISD::matchBinaryPredicate(N1, N0.getOperand(1), MatchOutOfRange))
      return DAG.getConstant(0, DL, VT);

    auto MatchInRange = [OpSizeInBits](ConstantSDNode *LHS,
                                       ConstantSDNode *RHS) {
      APInt c1 = LHS->getAPIntValue();
      APInt c2 = RHS->getAPIntValue();
      zeroExtendToMatch(c1, c2, 1 /* Overflow Bit */);
      return (c1 + c2).ult(OpSizeInBits);
    };
    if (ISD::matchBinaryPredicate(N1, N0.getOperand(1), MatchInRange)) {
      SDValue Sum = DAG.getNode(ISD::ADD, DL, ShiftVT, N1, N0.getOperand(1));
      return DAG.getNode(ISD::SHL, DL, VT, N0.getOperand(0), Sum);
    }
  }

  // fold (shl (ext (shl x, c1)), c2) -> (shl (ext x), (add c1, c2))
  // For this to be valid, the second form must not preserve any of the bits
  // that are shifted out by the inner shift in the first form.  This means
  // the outer shift size must be >= the number of bits added by the ext.
  // As a corollary, we don't care what kind of ext it is.
  if ((N0.getOpcode() == ISD::ZERO_EXTEND ||
       N0.getOpcode() == ISD::ANY_EXTEND ||
       N0.getOpcode() == ISD::SIGN_EXTEND) &&
      N0.getOperand(0).getOpcode() == ISD::SHL) {
    SDValue N0Op0 = N0.getOperand(0);
    SDValue InnerShiftAmt = N0Op0.getOperand(1);
    EVT InnerVT = N0Op0.getValueType();
    uint64_t InnerBitwidth = InnerVT.getScalarSizeInBits();

    auto MatchOutOfRange = [OpSizeInBits, InnerBitwidth](ConstantSDNode *LHS,
                                                         ConstantSDNode *RHS) {
      APInt c1 = LHS->getAPIntValue();
      APInt c2 = RHS->getAPIntValue();
      zeroExtendToMatch(c1, c2, 1 /* Overflow Bit */);
      return c2.uge(OpSizeInBits - InnerBitwidth) &&
             (c1 + c2).uge(OpSizeInBits);
    };
    if (ISD::matchBinaryPredicate(InnerShiftAmt, N1, MatchOutOfRange,
                                  /*AllowUndefs*/ false,
                                  /*AllowTypeMismatch*/ true))
      return DAG.getConstant(0, DL, VT);

    auto MatchInRange = [OpSizeInBits, InnerBitwidth](ConstantSDNode *LHS,
                                                      ConstantSDNode *RHS) {
      APInt c1 = LHS->getAPIntValue();
      APInt c2 = RHS->getAPIntValue();
      zeroExtendToMatch(c1, c2, 1 /* Overflow Bit */);
      return c2.uge(OpSizeInBits - InnerBitwidth) &&
             (c1 + c2).ult(OpSizeInBits);
    };
    if (ISD::matchBinaryPredicate(InnerShiftAmt, N1, MatchInRange,
                                  /*AllowUndefs*/ false,
                                  /*AllowTypeMismatch*/ true)) {
      SDValue Ext = DAG.getNode(N0.getOpcode(), DL, VT, N0Op0.getOperand(0));
      SDValue Sum = DAG.getZExtOrTrunc(InnerShiftAmt, DL, ShiftVT);
      Sum = DAG.getNode(ISD::ADD, DL, ShiftVT, Sum, N1);
      return DAG.getNode(ISD::SHL, DL, VT, Ext, Sum);
    }
  }

  // fold (shl (zext (srl x, C)), C) -> (zext (shl (srl x, C), C))
  // Only fold this if the inner zext has no other uses to avoid increasing
  // the total number of instructions.
  if (N0.getOpcode() == ISD::ZERO_EXTEND && N0.hasOneUse() &&
      N0.getOperand(0).getOpcode() == ISD::SRL) {
    SDValue N0Op0 = N0.getOperand(0);
    SDValue InnerShiftAmt = N0Op0.getOperand(1);

    auto MatchEqual = [VT](ConstantSDNode *LHS, ConstantSDNode *RHS) {
      APInt c1 = LHS->getAPIntValue();
      APInt c2 = RHS->getAPIntValue();
      zeroExtendToMatch(c1, c2);
      return c1.ult(VT.getScalarSizeInBits()) && (c1 == c2);
    };
    if (ISD::matchBinaryPredicate(InnerShiftAmt, N1, MatchEqual,
                                  /*AllowUndefs*/ false,
                                  /*AllowTypeMismatch*/ true)) {
      EVT InnerShiftAmtVT = N0Op0.getOperand(1).getValueType();
      SDValue NewSHL = DAG.getZExtOrTrunc(N1, DL, InnerShiftAmtVT);
      NewSHL = DAG.getNode(ISD::SHL, DL, N0Op0.getValueType(), N0Op0, NewSHL);
      AddToWorklist(NewSHL.getNode());
      return DAG.getNode(ISD::ZERO_EXTEND, SDLoc(N0), VT, NewSHL);
    }
  }

  if (N0.getOpcode() == ISD::SRL || N0.getOpcode() == ISD::SRA) {
    auto MatchShiftAmount = [OpSizeInBits](ConstantSDNode *LHS,
                                           ConstantSDNode *RHS) {
      const APInt &LHSC = LHS->getAPIntValue();
      const APInt &RHSC = RHS->getAPIntValue();
      return LHSC.ult(OpSizeInBits) && RHSC.ult(OpSizeInBits) &&
             LHSC.getZExtValue() <= RHSC.getZExtValue();
    };

    // fold (shl (sr[la] exact X,  C1), C2) -> (shl    X, (C2-C1)) if C1 <= C2
    // fold (shl (sr[la] exact X,  C1), C2) -> (sr[la] X, (C2-C1)) if C1 >= C2
    if (N0->getFlags().hasExact()) {
      if (ISD::matchBinaryPredicate(N0.getOperand(1), N1, MatchShiftAmount,
                                    /*AllowUndefs*/ false,
                                    /*AllowTypeMismatch*/ true)) {
        SDValue N01 = DAG.getZExtOrTrunc(N0.getOperand(1), DL, ShiftVT);
        SDValue Diff = DAG.getNode(ISD::SUB, DL, ShiftVT, N1, N01);
        return DAG.getNode(ISD::SHL, DL, VT, N0.getOperand(0), Diff);
      }
      if (ISD::matchBinaryPredicate(N1, N0.getOperand(1), MatchShiftAmount,
                                    /*AllowUndefs*/ false,
                                    /*AllowTypeMismatch*/ true)) {
        SDValue N01 = DAG.getZExtOrTrunc(N0.getOperand(1), DL, ShiftVT);
        SDValue Diff = DAG.getNode(ISD::SUB, DL, ShiftVT, N01, N1);
        return DAG.getNode(N0.getOpcode(), DL, VT, N0.getOperand(0), Diff);
      }
    }

    // fold (shl (srl x, c1), c2) -> (and (shl x, (sub c2, c1), MASK) or
    //                               (and (srl x, (sub c1, c2), MASK)
    // Only fold this if the inner shift has no other uses -- if it does,
    // folding this will increase the total number of instructions.
    if (N0.getOpcode() == ISD::SRL &&
        (N0.getOperand(1) == N1 || N0.hasOneUse()) &&
        TLI.shouldFoldConstantShiftPairToMask(N, Level)) {
      if (ISD::matchBinaryPredicate(N1, N0.getOperand(1), MatchShiftAmount,
                                    /*AllowUndefs*/ false,
                                    /*AllowTypeMismatch*/ true)) {
        SDValue N01 = DAG.getZExtOrTrunc(N0.getOperand(1), DL, ShiftVT);
        SDValue Diff = DAG.getNode(ISD::SUB, DL, ShiftVT, N01, N1);
        SDValue Mask = DAG.getAllOnesConstant(DL, VT);
        Mask = DAG.getNode(ISD::SHL, DL, VT, Mask, N01);
        Mask = DAG.getNode(ISD::SRL, DL, VT, Mask, Diff);
        SDValue Shift = DAG.getNode(ISD::SRL, DL, VT, N0.getOperand(0), Diff);
        return DAG.getNode(ISD::AND, DL, VT, Shift, Mask);
      }
      if (ISD::matchBinaryPredicate(N0.getOperand(1), N1, MatchShiftAmount,
                                    /*AllowUndefs*/ false,
                                    /*AllowTypeMismatch*/ true)) {
        SDValue N01 = DAG.getZExtOrTrunc(N0.getOperand(1), DL, ShiftVT);
        SDValue Diff = DAG.getNode(ISD::SUB, DL, ShiftVT, N1, N01);
        SDValue Mask = DAG.getAllOnesConstant(DL, VT);
        Mask = DAG.getNode(ISD::SHL, DL, VT, Mask, N1);
        SDValue Shift = DAG.getNode(ISD::SHL, DL, VT, N0.getOperand(0), Diff);
        return DAG.getNode(ISD::AND, DL, VT, Shift, Mask);
      }
    }
  }

  // fold (shl (sra x, c1), c1) -> (and x, (shl -1, c1))
  if (N0.getOpcode() == ISD::SRA && N1 == N0.getOperand(1) &&
      isConstantOrConstantVector(N1, /* No Opaques */ true)) {
    SDValue AllBits = DAG.getAllOnesConstant(DL, VT);
    SDValue HiBitsMask = DAG.getNode(ISD::SHL, DL, VT, AllBits, N1);
    return DAG.getNode(ISD::AND, DL, VT, N0.getOperand(0), HiBitsMask);
  }

  // fold (shl (add x, c1), c2) -> (add (shl x, c2), c1 << c2)
  // fold (shl (or x, c1), c2) -> (or (shl x, c2), c1 << c2)
  // Variant of version done on multiply, except mul by a power of 2 is turned
  // into a shift.
  if ((N0.getOpcode() == ISD::ADD || N0.getOpcode() == ISD::OR) &&
      N0->hasOneUse() && TLI.isDesirableToCommuteWithShift(N, Level)) {
    SDValue N01 = N0.getOperand(1);
    if (SDValue Shl1 =
            DAG.FoldConstantArithmetic(ISD::SHL, SDLoc(N1), VT, {N01, N1})) {
      SDValue Shl0 = DAG.getNode(ISD::SHL, SDLoc(N0), VT, N0.getOperand(0), N1);
      AddToWorklist(Shl0.getNode());
      SDNodeFlags Flags;
      // Preserve the disjoint flag for Or.
      if (N0.getOpcode() == ISD::OR && N0->getFlags().hasDisjoint())
        Flags |= SDNodeFlags::Disjoint;
      return DAG.getNode(N0.getOpcode(), DL, VT, Shl0, Shl1, Flags);
    }
  }

  // fold (shl (sext (add_nsw x, c1)), c2) -> (add (shl (sext x), c2), c1 << c2)
  // TODO: Add zext/add_nuw variant with suitable test coverage
  // TODO: Should we limit this with isLegalAddImmediate?
  if (N0.getOpcode() == ISD::SIGN_EXTEND &&
      N0.getOperand(0).getOpcode() == ISD::ADD &&
      N0.getOperand(0)->getFlags().hasNoSignedWrap() && N0->hasOneUse() &&
      N0.getOperand(0)->hasOneUse() &&
      TLI.isDesirableToCommuteWithShift(N, Level)) {
    SDValue Add = N0.getOperand(0);
    SDLoc DL(N0);
    if (SDValue ExtC = DAG.FoldConstantArithmetic(N0.getOpcode(), DL, VT,
                                                  {Add.getOperand(1)})) {
      if (SDValue ShlC =
              DAG.FoldConstantArithmetic(ISD::SHL, DL, VT, {ExtC, N1})) {
        SDValue ExtX = DAG.getNode(N0.getOpcode(), DL, VT, Add.getOperand(0));
        SDValue ShlX = DAG.getNode(ISD::SHL, DL, VT, ExtX, N1);
        return DAG.getNode(ISD::ADD, DL, VT, ShlX, ShlC);
      }
    }
  }

  // fold (shl (mul x, c1), c2) -> (mul x, c1 << c2)
  if (N0.getOpcode() == ISD::MUL && N0->hasOneUse()) {
    SDValue N01 = N0.getOperand(1);
    if (SDValue Shl =
            DAG.FoldConstantArithmetic(ISD::SHL, SDLoc(N1), VT, {N01, N1}))
      return DAG.getNode(ISD::MUL, DL, VT, N0.getOperand(0), Shl);
  }

  ConstantSDNode *N1C = isConstOrConstSplat(N1);
  if (N1C && !N1C->isOpaque())
    if (SDValue NewSHL = visitShiftByConstant(N))
      return NewSHL;

  // fold (shl X, cttz(Y)) -> (mul (Y & -Y), X) if cttz is unsupported on the
  // target.
  if (((N1.getOpcode() == ISD::CTTZ &&
        VT.getScalarSizeInBits() <= ShiftVT.getScalarSizeInBits()) ||
       N1.getOpcode() == ISD::CTTZ_ZERO_UNDEF) &&
      N1.hasOneUse() && !TLI.isOperationLegalOrCustom(ISD::CTTZ, ShiftVT) &&
      TLI.isOperationLegalOrCustom(ISD::MUL, VT)) {
    SDValue Y = N1.getOperand(0);
    SDLoc DL(N);
    SDValue NegY = DAG.getNegative(Y, DL, ShiftVT);
    SDValue And =
        DAG.getZExtOrTrunc(DAG.getNode(ISD::AND, DL, ShiftVT, Y, NegY), DL, VT);
    return DAG.getNode(ISD::MUL, DL, VT, And, N0);
  }

  if (SimplifyDemandedBits(SDValue(N, 0)))
    return SDValue(N, 0);

  // Fold (shl (vscale * C0), C1) to (vscale * (C0 << C1)).
  if (N0.getOpcode() == ISD::VSCALE && N1C) {
    const APInt &C0 = N0.getConstantOperandAPInt(0);
    const APInt &C1 = N1C->getAPIntValue();
    return DAG.getVScale(DL, VT, C0 << C1);
  }

  // Fold (shl step_vector(C0), C1) to (step_vector(C0 << C1)).
  APInt ShlVal;
  if (N0.getOpcode() == ISD::STEP_VECTOR &&
      ISD::isConstantSplatVector(N1.getNode(), ShlVal)) {
    const APInt &C0 = N0.getConstantOperandAPInt(0);
    if (ShlVal.ult(C0.getBitWidth())) {
      APInt NewStep = C0 << ShlVal;
      return DAG.getStepVector(DL, VT, NewStep);
    }
  }

  return SDValue();
}

// Transform a right shift of a multiply into a multiply-high.
// Examples:
// (srl (mul (zext i32:$a to i64), (zext i32:$a to i64)), 32) -> (mulhu $a, $b)
// (sra (mul (sext i32:$a to i64), (sext i32:$a to i64)), 32) -> (mulhs $a, $b)
static SDValue combineShiftToMULH(SDNode *N, const SDLoc &DL, SelectionDAG &DAG,
                                  const TargetLowering &TLI) {
  assert((N->getOpcode() == ISD::SRL || N->getOpcode() == ISD::SRA) &&
         "SRL or SRA node is required here!");

  // Check the shift amount. Proceed with the transformation if the shift
  // amount is constant.
  ConstantSDNode *ShiftAmtSrc = isConstOrConstSplat(N->getOperand(1));
  if (!ShiftAmtSrc)
    return SDValue();

  // The operation feeding into the shift must be a multiply.
  SDValue ShiftOperand = N->getOperand(0);
  if (ShiftOperand.getOpcode() != ISD::MUL)
    return SDValue();

  // Both operands must be equivalent extend nodes.
  SDValue LeftOp = ShiftOperand.getOperand(0);
  SDValue RightOp = ShiftOperand.getOperand(1);

  bool IsSignExt = LeftOp.getOpcode() == ISD::SIGN_EXTEND;
  bool IsZeroExt = LeftOp.getOpcode() == ISD::ZERO_EXTEND;

  if (!IsSignExt && !IsZeroExt)
    return SDValue();

  EVT NarrowVT = LeftOp.getOperand(0).getValueType();
  unsigned NarrowVTSize = NarrowVT.getScalarSizeInBits();

  // return true if U may use the lower bits of its operands
  auto UserOfLowerBits = [NarrowVTSize](SDNode *U) {
    if (U->getOpcode() != ISD::SRL && U->getOpcode() != ISD::SRA) {
      return true;
    }
    ConstantSDNode *UShiftAmtSrc = isConstOrConstSplat(U->getOperand(1));
    if (!UShiftAmtSrc) {
      return true;
    }
    unsigned UShiftAmt = UShiftAmtSrc->getZExtValue();
    return UShiftAmt < NarrowVTSize;
  };

  // If the lower part of the MUL is also used and MUL_LOHI is supported
  // do not introduce the MULH in favor of MUL_LOHI
  unsigned MulLoHiOp = IsSignExt ? ISD::SMUL_LOHI : ISD::UMUL_LOHI;
  if (!ShiftOperand.hasOneUse() &&
      TLI.isOperationLegalOrCustom(MulLoHiOp, NarrowVT) &&
      llvm::any_of(ShiftOperand->uses(), UserOfLowerBits)) {
    return SDValue();
  }

  SDValue MulhRightOp;
  if (ConstantSDNode *Constant = isConstOrConstSplat(RightOp)) {
    unsigned ActiveBits = IsSignExt
                              ? Constant->getAPIntValue().getSignificantBits()
                              : Constant->getAPIntValue().getActiveBits();
    if (ActiveBits > NarrowVTSize)
      return SDValue();
    MulhRightOp = DAG.getConstant(
        Constant->getAPIntValue().trunc(NarrowVT.getScalarSizeInBits()), DL,
        NarrowVT);
  } else {
    if (LeftOp.getOpcode() != RightOp.getOpcode())
      return SDValue();
    // Check that the two extend nodes are the same type.
    if (NarrowVT != RightOp.getOperand(0).getValueType())
      return SDValue();
    MulhRightOp = RightOp.getOperand(0);
  }

  EVT WideVT = LeftOp.getValueType();
  // Proceed with the transformation if the wide types match.
  assert((WideVT == RightOp.getValueType()) &&
         "Cannot have a multiply node with two different operand types.");

  // Proceed with the transformation if the wide type is twice as large
  // as the narrow type.
  if (WideVT.getScalarSizeInBits() != 2 * NarrowVTSize)
    return SDValue();

  // Check the shift amount with the narrow type size.
  // Proceed with the transformation if the shift amount is the width
  // of the narrow type.
  unsigned ShiftAmt = ShiftAmtSrc->getZExtValue();
  if (ShiftAmt != NarrowVTSize)
    return SDValue();

  // If the operation feeding into the MUL is a sign extend (sext),
  // we use mulhs. Othewise, zero extends (zext) use mulhu.
  unsigned MulhOpcode = IsSignExt ? ISD::MULHS : ISD::MULHU;

  // Combine to mulh if mulh is legal/custom for the narrow type on the target
  // or if it is a vector type then we could transform to an acceptable type and
  // rely on legalization to split/combine the result.
  if (NarrowVT.isVector()) {
    EVT TransformVT = TLI.getTypeToTransformTo(*DAG.getContext(), NarrowVT);
    if (TransformVT.getVectorElementType() != NarrowVT.getVectorElementType() ||
        !TLI.isOperationLegalOrCustom(MulhOpcode, TransformVT))
      return SDValue();
  } else {
    if (!TLI.isOperationLegalOrCustom(MulhOpcode, NarrowVT))
      return SDValue();
  }

  SDValue Result =
      DAG.getNode(MulhOpcode, DL, NarrowVT, LeftOp.getOperand(0), MulhRightOp);
  bool IsSigned = N->getOpcode() == ISD::SRA;
  return DAG.getExtOrTrunc(IsSigned, Result, DL, WideVT);
}

// fold (bswap (logic_op(bswap(x),y))) -> logic_op(x,bswap(y))
// This helper function accept SDNode with opcode ISD::BSWAP and ISD::BITREVERSE
static SDValue foldBitOrderCrossLogicOp(SDNode *N, SelectionDAG &DAG) {
  unsigned Opcode = N->getOpcode();
  if (Opcode != ISD::BSWAP && Opcode != ISD::BITREVERSE)
    return SDValue();

  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);
  if (ISD::isBitwiseLogicOp(N0.getOpcode()) && N0.hasOneUse()) {
    SDValue OldLHS = N0.getOperand(0);
    SDValue OldRHS = N0.getOperand(1);

    // If both operands are bswap/bitreverse, ignore the multiuse
    // Otherwise need to ensure logic_op and bswap/bitreverse(x) have one use.
    if (OldLHS.getOpcode() == Opcode && OldRHS.getOpcode() == Opcode) {
      return DAG.getNode(N0.getOpcode(), DL, VT, OldLHS.getOperand(0),
                         OldRHS.getOperand(0));
    }

    if (OldLHS.getOpcode() == Opcode && OldLHS.hasOneUse()) {
      SDValue NewBitReorder = DAG.getNode(Opcode, DL, VT, OldRHS);
      return DAG.getNode(N0.getOpcode(), DL, VT, OldLHS.getOperand(0),
                         NewBitReorder);
    }

    if (OldRHS.getOpcode() == Opcode && OldRHS.hasOneUse()) {
      SDValue NewBitReorder = DAG.getNode(Opcode, DL, VT, OldLHS);
      return DAG.getNode(N0.getOpcode(), DL, VT, NewBitReorder,
                         OldRHS.getOperand(0));
    }
  }
  return SDValue();
}

SDValue DAGCombiner::visitSRA(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  if (SDValue V = DAG.simplifyShift(N0, N1))
    return V;

  SDLoc DL(N);
  EVT VT = N0.getValueType();
  unsigned OpSizeInBits = VT.getScalarSizeInBits();

  // fold (sra c1, c2) -> (sra c1, c2)
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::SRA, DL, VT, {N0, N1}))
    return C;

  // Arithmetic shifting an all-sign-bit value is a no-op.
  // fold (sra 0, x) -> 0
  // fold (sra -1, x) -> -1
  if (DAG.ComputeNumSignBits(N0) == OpSizeInBits)
    return N0;

  // fold vector ops
  if (VT.isVector())
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  ConstantSDNode *N1C = isConstOrConstSplat(N1);

  // fold (sra (sra x, c1), c2) -> (sra x, (add c1, c2))
  // clamp (add c1, c2) to max shift.
  if (N0.getOpcode() == ISD::SRA) {
    EVT ShiftVT = N1.getValueType();
    EVT ShiftSVT = ShiftVT.getScalarType();
    SmallVector<SDValue, 16> ShiftValues;

    auto SumOfShifts = [&](ConstantSDNode *LHS, ConstantSDNode *RHS) {
      APInt c1 = LHS->getAPIntValue();
      APInt c2 = RHS->getAPIntValue();
      zeroExtendToMatch(c1, c2, 1 /* Overflow Bit */);
      APInt Sum = c1 + c2;
      unsigned ShiftSum =
          Sum.uge(OpSizeInBits) ? (OpSizeInBits - 1) : Sum.getZExtValue();
      ShiftValues.push_back(DAG.getConstant(ShiftSum, DL, ShiftSVT));
      return true;
    };
    if (ISD::matchBinaryPredicate(N1, N0.getOperand(1), SumOfShifts)) {
      SDValue ShiftValue;
      if (N1.getOpcode() == ISD::BUILD_VECTOR)
        ShiftValue = DAG.getBuildVector(ShiftVT, DL, ShiftValues);
      else if (N1.getOpcode() == ISD::SPLAT_VECTOR) {
        assert(ShiftValues.size() == 1 &&
               "Expected matchBinaryPredicate to return one element for "
               "SPLAT_VECTORs");
        ShiftValue = DAG.getSplatVector(ShiftVT, DL, ShiftValues[0]);
      } else
        ShiftValue = ShiftValues[0];
      return DAG.getNode(ISD::SRA, DL, VT, N0.getOperand(0), ShiftValue);
    }
  }

  // fold (sra (shl X, m), (sub result_size, n))
  // -> (sign_extend (trunc (shl X, (sub (sub result_size, n), m)))) for
  // result_size - n != m.
  // If truncate is free for the target sext(shl) is likely to result in better
  // code.
  if (N0.getOpcode() == ISD::SHL && N1C) {
    // Get the two constants of the shifts, CN0 = m, CN = n.
    const ConstantSDNode *N01C = isConstOrConstSplat(N0.getOperand(1));
    if (N01C) {
      LLVMContext &Ctx = *DAG.getContext();
      // Determine what the truncate's result bitsize and type would be.
      EVT TruncVT = EVT::getIntegerVT(Ctx, OpSizeInBits - N1C->getZExtValue());

      if (VT.isVector())
        TruncVT = EVT::getVectorVT(Ctx, TruncVT, VT.getVectorElementCount());

      // Determine the residual right-shift amount.
      int ShiftAmt = N1C->getZExtValue() - N01C->getZExtValue();

      // If the shift is not a no-op (in which case this should be just a sign
      // extend already), the truncated to type is legal, sign_extend is legal
      // on that type, and the truncate to that type is both legal and free,
      // perform the transform.
      if ((ShiftAmt > 0) &&
          TLI.isOperationLegalOrCustom(ISD::SIGN_EXTEND, TruncVT) &&
          TLI.isOperationLegalOrCustom(ISD::TRUNCATE, VT) &&
          TLI.isTruncateFree(VT, TruncVT)) {
        SDValue Amt = DAG.getShiftAmountConstant(ShiftAmt, VT, DL);
        SDValue Shift = DAG.getNode(ISD::SRL, DL, VT,
                                    N0.getOperand(0), Amt);
        SDValue Trunc = DAG.getNode(ISD::TRUNCATE, DL, TruncVT,
                                    Shift);
        return DAG.getNode(ISD::SIGN_EXTEND, DL,
                           N->getValueType(0), Trunc);
      }
    }
  }

  // We convert trunc/ext to opposing shifts in IR, but casts may be cheaper.
  //   sra (add (shl X, N1C), AddC), N1C -->
  //   sext (add (trunc X to (width - N1C)), AddC')
  //   sra (sub AddC, (shl X, N1C)), N1C -->
  //   sext (sub AddC1',(trunc X to (width - N1C)))
  if ((N0.getOpcode() == ISD::ADD || N0.getOpcode() == ISD::SUB) && N1C &&
      N0.hasOneUse()) {
    bool IsAdd = N0.getOpcode() == ISD::ADD;
    SDValue Shl = N0.getOperand(IsAdd ? 0 : 1);
    if (Shl.getOpcode() == ISD::SHL && Shl.getOperand(1) == N1 &&
        Shl.hasOneUse()) {
      // TODO: AddC does not need to be a splat.
      if (ConstantSDNode *AddC =
              isConstOrConstSplat(N0.getOperand(IsAdd ? 1 : 0))) {
        // Determine what the truncate's type would be and ask the target if
        // that is a free operation.
        LLVMContext &Ctx = *DAG.getContext();
        unsigned ShiftAmt = N1C->getZExtValue();
        EVT TruncVT = EVT::getIntegerVT(Ctx, OpSizeInBits - ShiftAmt);
        if (VT.isVector())
          TruncVT = EVT::getVectorVT(Ctx, TruncVT, VT.getVectorElementCount());

        // TODO: The simple type check probably belongs in the default hook
        //       implementation and/or target-specific overrides (because
        //       non-simple types likely require masking when legalized), but
        //       that restriction may conflict with other transforms.
        if (TruncVT.isSimple() && isTypeLegal(TruncVT) &&
            TLI.isTruncateFree(VT, TruncVT)) {
          SDValue Trunc = DAG.getZExtOrTrunc(Shl.getOperand(0), DL, TruncVT);
          SDValue ShiftC =
              DAG.getConstant(AddC->getAPIntValue().lshr(ShiftAmt).trunc(
                                  TruncVT.getScalarSizeInBits()),
                              DL, TruncVT);
          SDValue Add;
          if (IsAdd)
            Add = DAG.getNode(ISD::ADD, DL, TruncVT, Trunc, ShiftC);
          else
            Add = DAG.getNode(ISD::SUB, DL, TruncVT, ShiftC, Trunc);
          return DAG.getSExtOrTrunc(Add, DL, VT);
        }
      }
    }
  }

  // fold (sra x, (trunc (and y, c))) -> (sra x, (and (trunc y), (trunc c))).
  if (N1.getOpcode() == ISD::TRUNCATE &&
      N1.getOperand(0).getOpcode() == ISD::AND) {
    if (SDValue NewOp1 = distributeTruncateThroughAnd(N1.getNode()))
      return DAG.getNode(ISD::SRA, DL, VT, N0, NewOp1);
  }

  // fold (sra (trunc (sra x, c1)), c2) -> (trunc (sra x, c1 + c2))
  // fold (sra (trunc (srl x, c1)), c2) -> (trunc (sra x, c1 + c2))
  //      if c1 is equal to the number of bits the trunc removes
  // TODO - support non-uniform vector shift amounts.
  if (N0.getOpcode() == ISD::TRUNCATE &&
      (N0.getOperand(0).getOpcode() == ISD::SRL ||
       N0.getOperand(0).getOpcode() == ISD::SRA) &&
      N0.getOperand(0).hasOneUse() &&
      N0.getOperand(0).getOperand(1).hasOneUse() && N1C) {
    SDValue N0Op0 = N0.getOperand(0);
    if (ConstantSDNode *LargeShift = isConstOrConstSplat(N0Op0.getOperand(1))) {
      EVT LargeVT = N0Op0.getValueType();
      unsigned TruncBits = LargeVT.getScalarSizeInBits() - OpSizeInBits;
      if (LargeShift->getAPIntValue() == TruncBits) {
        EVT LargeShiftVT = getShiftAmountTy(LargeVT);
        SDValue Amt = DAG.getZExtOrTrunc(N1, DL, LargeShiftVT);
        Amt = DAG.getNode(ISD::ADD, DL, LargeShiftVT, Amt,
                          DAG.getConstant(TruncBits, DL, LargeShiftVT));
        SDValue SRA =
            DAG.getNode(ISD::SRA, DL, LargeVT, N0Op0.getOperand(0), Amt);
        return DAG.getNode(ISD::TRUNCATE, DL, VT, SRA);
      }
    }
  }

  // Simplify, based on bits shifted out of the LHS.
  if (SimplifyDemandedBits(SDValue(N, 0)))
    return SDValue(N, 0);

  // If the sign bit is known to be zero, switch this to a SRL.
  if (DAG.SignBitIsZero(N0))
    return DAG.getNode(ISD::SRL, DL, VT, N0, N1);

  if (N1C && !N1C->isOpaque())
    if (SDValue NewSRA = visitShiftByConstant(N))
      return NewSRA;

  // Try to transform this shift into a multiply-high if
  // it matches the appropriate pattern detected in combineShiftToMULH.
  if (SDValue MULH = combineShiftToMULH(N, DL, DAG, TLI))
    return MULH;

  // Attempt to convert a sra of a load into a narrower sign-extending load.
  if (SDValue NarrowLoad = reduceLoadWidth(N))
    return NarrowLoad;

  if (SDValue AVG = foldShiftToAvg(N))
    return AVG;

  return SDValue();
}

SDValue DAGCombiner::visitSRL(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  if (SDValue V = DAG.simplifyShift(N0, N1))
    return V;

  SDLoc DL(N);
  EVT VT = N0.getValueType();
  EVT ShiftVT = N1.getValueType();
  unsigned OpSizeInBits = VT.getScalarSizeInBits();

  // fold (srl c1, c2) -> c1 >>u c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::SRL, DL, VT, {N0, N1}))
    return C;

  // fold vector ops
  if (VT.isVector())
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  // if (srl x, c) is known to be zero, return 0
  ConstantSDNode *N1C = isConstOrConstSplat(N1);
  if (N1C &&
      DAG.MaskedValueIsZero(SDValue(N, 0), APInt::getAllOnes(OpSizeInBits)))
    return DAG.getConstant(0, DL, VT);

  // fold (srl (srl x, c1), c2) -> 0 or (srl x, (add c1, c2))
  if (N0.getOpcode() == ISD::SRL) {
    auto MatchOutOfRange = [OpSizeInBits](ConstantSDNode *LHS,
                                          ConstantSDNode *RHS) {
      APInt c1 = LHS->getAPIntValue();
      APInt c2 = RHS->getAPIntValue();
      zeroExtendToMatch(c1, c2, 1 /* Overflow Bit */);
      return (c1 + c2).uge(OpSizeInBits);
    };
    if (ISD::matchBinaryPredicate(N1, N0.getOperand(1), MatchOutOfRange))
      return DAG.getConstant(0, DL, VT);

    auto MatchInRange = [OpSizeInBits](ConstantSDNode *LHS,
                                       ConstantSDNode *RHS) {
      APInt c1 = LHS->getAPIntValue();
      APInt c2 = RHS->getAPIntValue();
      zeroExtendToMatch(c1, c2, 1 /* Overflow Bit */);
      return (c1 + c2).ult(OpSizeInBits);
    };
    if (ISD::matchBinaryPredicate(N1, N0.getOperand(1), MatchInRange)) {
      SDValue Sum = DAG.getNode(ISD::ADD, DL, ShiftVT, N1, N0.getOperand(1));
      return DAG.getNode(ISD::SRL, DL, VT, N0.getOperand(0), Sum);
    }
  }

  if (N1C && N0.getOpcode() == ISD::TRUNCATE &&
      N0.getOperand(0).getOpcode() == ISD::SRL) {
    SDValue InnerShift = N0.getOperand(0);
    // TODO - support non-uniform vector shift amounts.
    if (auto *N001C = isConstOrConstSplat(InnerShift.getOperand(1))) {
      uint64_t c1 = N001C->getZExtValue();
      uint64_t c2 = N1C->getZExtValue();
      EVT InnerShiftVT = InnerShift.getValueType();
      EVT ShiftAmtVT = InnerShift.getOperand(1).getValueType();
      uint64_t InnerShiftSize = InnerShiftVT.getScalarSizeInBits();
      // srl (trunc (srl x, c1)), c2 --> 0 or (trunc (srl x, (add c1, c2)))
      // This is only valid if the OpSizeInBits + c1 = size of inner shift.
      if (c1 + OpSizeInBits == InnerShiftSize) {
        if (c1 + c2 >= InnerShiftSize)
          return DAG.getConstant(0, DL, VT);
        SDValue NewShiftAmt = DAG.getConstant(c1 + c2, DL, ShiftAmtVT);
        SDValue NewShift = DAG.getNode(ISD::SRL, DL, InnerShiftVT,
                                       InnerShift.getOperand(0), NewShiftAmt);
        return DAG.getNode(ISD::TRUNCATE, DL, VT, NewShift);
      }
      // In the more general case, we can clear the high bits after the shift:
      // srl (trunc (srl x, c1)), c2 --> trunc (and (srl x, (c1+c2)), Mask)
      if (N0.hasOneUse() && InnerShift.hasOneUse() &&
          c1 + c2 < InnerShiftSize) {
        SDValue NewShiftAmt = DAG.getConstant(c1 + c2, DL, ShiftAmtVT);
        SDValue NewShift = DAG.getNode(ISD::SRL, DL, InnerShiftVT,
                                       InnerShift.getOperand(0), NewShiftAmt);
        SDValue Mask = DAG.getConstant(APInt::getLowBitsSet(InnerShiftSize,
                                                            OpSizeInBits - c2),
                                       DL, InnerShiftVT);
        SDValue And = DAG.getNode(ISD::AND, DL, InnerShiftVT, NewShift, Mask);
        return DAG.getNode(ISD::TRUNCATE, DL, VT, And);
      }
    }
  }

  // fold (srl (shl x, c1), c2) -> (and (shl x, (sub c1, c2), MASK) or
  //                               (and (srl x, (sub c2, c1), MASK)
  if (N0.getOpcode() == ISD::SHL &&
      (N0.getOperand(1) == N1 || N0->hasOneUse()) &&
      TLI.shouldFoldConstantShiftPairToMask(N, Level)) {
    auto MatchShiftAmount = [OpSizeInBits](ConstantSDNode *LHS,
                                           ConstantSDNode *RHS) {
      const APInt &LHSC = LHS->getAPIntValue();
      const APInt &RHSC = RHS->getAPIntValue();
      return LHSC.ult(OpSizeInBits) && RHSC.ult(OpSizeInBits) &&
             LHSC.getZExtValue() <= RHSC.getZExtValue();
    };
    if (ISD::matchBinaryPredicate(N1, N0.getOperand(1), MatchShiftAmount,
                                  /*AllowUndefs*/ false,
                                  /*AllowTypeMismatch*/ true)) {
      SDValue N01 = DAG.getZExtOrTrunc(N0.getOperand(1), DL, ShiftVT);
      SDValue Diff = DAG.getNode(ISD::SUB, DL, ShiftVT, N01, N1);
      SDValue Mask = DAG.getAllOnesConstant(DL, VT);
      Mask = DAG.getNode(ISD::SRL, DL, VT, Mask, N01);
      Mask = DAG.getNode(ISD::SHL, DL, VT, Mask, Diff);
      SDValue Shift = DAG.getNode(ISD::SHL, DL, VT, N0.getOperand(0), Diff);
      return DAG.getNode(ISD::AND, DL, VT, Shift, Mask);
    }
    if (ISD::matchBinaryPredicate(N0.getOperand(1), N1, MatchShiftAmount,
                                  /*AllowUndefs*/ false,
                                  /*AllowTypeMismatch*/ true)) {
      SDValue N01 = DAG.getZExtOrTrunc(N0.getOperand(1), DL, ShiftVT);
      SDValue Diff = DAG.getNode(ISD::SUB, DL, ShiftVT, N1, N01);
      SDValue Mask = DAG.getAllOnesConstant(DL, VT);
      Mask = DAG.getNode(ISD::SRL, DL, VT, Mask, N1);
      SDValue Shift = DAG.getNode(ISD::SRL, DL, VT, N0.getOperand(0), Diff);
      return DAG.getNode(ISD::AND, DL, VT, Shift, Mask);
    }
  }

  // fold (srl (anyextend x), c) -> (and (anyextend (srl x, c)), mask)
  // TODO - support non-uniform vector shift amounts.
  if (N1C && N0.getOpcode() == ISD::ANY_EXTEND) {
    // Shifting in all undef bits?
    EVT SmallVT = N0.getOperand(0).getValueType();
    unsigned BitSize = SmallVT.getScalarSizeInBits();
    if (N1C->getAPIntValue().uge(BitSize))
      return DAG.getUNDEF(VT);

    if (!LegalTypes || TLI.isTypeDesirableForOp(ISD::SRL, SmallVT)) {
      uint64_t ShiftAmt = N1C->getZExtValue();
      SDLoc DL0(N0);
      SDValue SmallShift =
          DAG.getNode(ISD::SRL, DL0, SmallVT, N0.getOperand(0),
                      DAG.getShiftAmountConstant(ShiftAmt, SmallVT, DL0));
      AddToWorklist(SmallShift.getNode());
      APInt Mask = APInt::getLowBitsSet(OpSizeInBits, OpSizeInBits - ShiftAmt);
      return DAG.getNode(ISD::AND, DL, VT,
                         DAG.getNode(ISD::ANY_EXTEND, DL, VT, SmallShift),
                         DAG.getConstant(Mask, DL, VT));
    }
  }

  // fold (srl (sra X, Y), 31) -> (srl X, 31).  This srl only looks at the sign
  // bit, which is unmodified by sra.
  if (N1C && N1C->getAPIntValue() == (OpSizeInBits - 1)) {
    if (N0.getOpcode() == ISD::SRA)
      return DAG.getNode(ISD::SRL, DL, VT, N0.getOperand(0), N1);
  }

  // fold (srl (ctlz x), "5") -> x  iff x has one bit set (the low bit), and x has a power
  // of two bitwidth. The "5" represents (log2 (bitwidth x)).
  if (N1C && N0.getOpcode() == ISD::CTLZ &&
      isPowerOf2_32(OpSizeInBits) &&
      N1C->getAPIntValue() == Log2_32(OpSizeInBits)) {
    KnownBits Known = DAG.computeKnownBits(N0.getOperand(0));

    // If any of the input bits are KnownOne, then the input couldn't be all
    // zeros, thus the result of the srl will always be zero.
    if (Known.One.getBoolValue()) return DAG.getConstant(0, SDLoc(N0), VT);

    // If all of the bits input the to ctlz node are known to be zero, then
    // the result of the ctlz is "32" and the result of the shift is one.
    APInt UnknownBits = ~Known.Zero;
    if (UnknownBits == 0) return DAG.getConstant(1, SDLoc(N0), VT);

    // Otherwise, check to see if there is exactly one bit input to the ctlz.
    if (UnknownBits.isPowerOf2()) {
      // Okay, we know that only that the single bit specified by UnknownBits
      // could be set on input to the CTLZ node. If this bit is set, the SRL
      // will return 0, if it is clear, it returns 1. Change the CTLZ/SRL pair
      // to an SRL/XOR pair, which is likely to simplify more.
      unsigned ShAmt = UnknownBits.countr_zero();
      SDValue Op = N0.getOperand(0);

      if (ShAmt) {
        SDLoc DL(N0);
        Op = DAG.getNode(ISD::SRL, DL, VT, Op,
                         DAG.getShiftAmountConstant(ShAmt, VT, DL));
        AddToWorklist(Op.getNode());
      }
      return DAG.getNode(ISD::XOR, DL, VT, Op, DAG.getConstant(1, DL, VT));
    }
  }

  // fold (srl x, (trunc (and y, c))) -> (srl x, (and (trunc y), (trunc c))).
  if (N1.getOpcode() == ISD::TRUNCATE &&
      N1.getOperand(0).getOpcode() == ISD::AND) {
    if (SDValue NewOp1 = distributeTruncateThroughAnd(N1.getNode()))
      return DAG.getNode(ISD::SRL, DL, VT, N0, NewOp1);
  }

  // fold operands of srl based on knowledge that the low bits are not
  // demanded.
  if (SimplifyDemandedBits(SDValue(N, 0)))
    return SDValue(N, 0);

  if (N1C && !N1C->isOpaque())
    if (SDValue NewSRL = visitShiftByConstant(N))
      return NewSRL;

  // Attempt to convert a srl of a load into a narrower zero-extending load.
  if (SDValue NarrowLoad = reduceLoadWidth(N))
    return NarrowLoad;

  // Here is a common situation. We want to optimize:
  //
  //   %a = ...
  //   %b = and i32 %a, 2
  //   %c = srl i32 %b, 1
  //   brcond i32 %c ...
  //
  // into
  //
  //   %a = ...
  //   %b = and %a, 2
  //   %c = setcc eq %b, 0
  //   brcond %c ...
  //
  // However when after the source operand of SRL is optimized into AND, the SRL
  // itself may not be optimized further. Look for it and add the BRCOND into
  // the worklist.
  //
  // The also tends to happen for binary operations when SimplifyDemandedBits
  // is involved.
  //
  // FIXME: This is unecessary if we process the DAG in topological order,
  // which we plan to do. This workaround can be removed once the DAG is
  // processed in topological order.
  if (N->hasOneUse()) {
    SDNode *Use = *N->use_begin();

    // Look pass the truncate.
    if (Use->getOpcode() == ISD::TRUNCATE && Use->hasOneUse())
      Use = *Use->use_begin();

    if (Use->getOpcode() == ISD::BRCOND || Use->getOpcode() == ISD::AND ||
        Use->getOpcode() == ISD::OR || Use->getOpcode() == ISD::XOR)
      AddToWorklist(Use);
  }

  // Try to transform this shift into a multiply-high if
  // it matches the appropriate pattern detected in combineShiftToMULH.
  if (SDValue MULH = combineShiftToMULH(N, DL, DAG, TLI))
    return MULH;

  if (SDValue AVG = foldShiftToAvg(N))
    return AVG;

  return SDValue();
}

SDValue DAGCombiner::visitFunnelShift(SDNode *N) {
  EVT VT = N->getValueType(0);
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue N2 = N->getOperand(2);
  bool IsFSHL = N->getOpcode() == ISD::FSHL;
  unsigned BitWidth = VT.getScalarSizeInBits();
  SDLoc DL(N);

  // fold (fshl N0, N1, 0) -> N0
  // fold (fshr N0, N1, 0) -> N1
  if (isPowerOf2_32(BitWidth))
    if (DAG.MaskedValueIsZero(
            N2, APInt(N2.getScalarValueSizeInBits(), BitWidth - 1)))
      return IsFSHL ? N0 : N1;

  auto IsUndefOrZero = [](SDValue V) {
    return V.isUndef() || isNullOrNullSplat(V, /*AllowUndefs*/ true);
  };

  // TODO - support non-uniform vector shift amounts.
  if (ConstantSDNode *Cst = isConstOrConstSplat(N2)) {
    EVT ShAmtTy = N2.getValueType();

    // fold (fsh* N0, N1, c) -> (fsh* N0, N1, c % BitWidth)
    if (Cst->getAPIntValue().uge(BitWidth)) {
      uint64_t RotAmt = Cst->getAPIntValue().urem(BitWidth);
      return DAG.getNode(N->getOpcode(), DL, VT, N0, N1,
                         DAG.getConstant(RotAmt, DL, ShAmtTy));
    }

    unsigned ShAmt = Cst->getZExtValue();
    if (ShAmt == 0)
      return IsFSHL ? N0 : N1;

    // fold fshl(undef_or_zero, N1, C) -> lshr(N1, BW-C)
    // fold fshr(undef_or_zero, N1, C) -> lshr(N1, C)
    // fold fshl(N0, undef_or_zero, C) -> shl(N0, C)
    // fold fshr(N0, undef_or_zero, C) -> shl(N0, BW-C)
    if (IsUndefOrZero(N0))
      return DAG.getNode(
          ISD::SRL, DL, VT, N1,
          DAG.getConstant(IsFSHL ? BitWidth - ShAmt : ShAmt, DL, ShAmtTy));
    if (IsUndefOrZero(N1))
      return DAG.getNode(
          ISD::SHL, DL, VT, N0,
          DAG.getConstant(IsFSHL ? ShAmt : BitWidth - ShAmt, DL, ShAmtTy));

    // fold (fshl ld1, ld0, c) -> (ld0[ofs]) iff ld0 and ld1 are consecutive.
    // fold (fshr ld1, ld0, c) -> (ld0[ofs]) iff ld0 and ld1 are consecutive.
    // TODO - bigendian support once we have test coverage.
    // TODO - can we merge this with CombineConseutiveLoads/MatchLoadCombine?
    // TODO - permit LHS EXTLOAD if extensions are shifted out.
    if ((BitWidth % 8) == 0 && (ShAmt % 8) == 0 && !VT.isVector() &&
        !DAG.getDataLayout().isBigEndian()) {
      auto *LHS = dyn_cast<LoadSDNode>(N0);
      auto *RHS = dyn_cast<LoadSDNode>(N1);
      if (LHS && RHS && LHS->isSimple() && RHS->isSimple() &&
          LHS->getAddressSpace() == RHS->getAddressSpace() &&
          (LHS->hasOneUse() || RHS->hasOneUse()) && ISD::isNON_EXTLoad(RHS) &&
          ISD::isNON_EXTLoad(LHS)) {
        if (DAG.areNonVolatileConsecutiveLoads(LHS, RHS, BitWidth / 8, 1)) {
          SDLoc DL(RHS);
          uint64_t PtrOff =
              IsFSHL ? (((BitWidth - ShAmt) % BitWidth) / 8) : (ShAmt / 8);
          Align NewAlign = commonAlignment(RHS->getAlign(), PtrOff);
          unsigned Fast = 0;
          if (TLI.allowsMemoryAccess(*DAG.getContext(), DAG.getDataLayout(), VT,
                                     RHS->getAddressSpace(), NewAlign,
                                     RHS->getMemOperand()->getFlags(), &Fast) &&
              Fast) {
            SDValue NewPtr = DAG.getMemBasePlusOffset(
                RHS->getBasePtr(), TypeSize::getFixed(PtrOff), DL);
            AddToWorklist(NewPtr.getNode());
            SDValue Load = DAG.getLoad(
                VT, DL, RHS->getChain(), NewPtr,
                RHS->getPointerInfo().getWithOffset(PtrOff), NewAlign,
                RHS->getMemOperand()->getFlags(), RHS->getAAInfo());
            // Replace the old load's chain with the new load's chain.
            WorklistRemover DeadNodes(*this);
            DAG.ReplaceAllUsesOfValueWith(N1.getValue(1), Load.getValue(1));
            return Load;
          }
        }
      }
    }
  }

  // fold fshr(undef_or_zero, N1, N2) -> lshr(N1, N2)
  // fold fshl(N0, undef_or_zero, N2) -> shl(N0, N2)
  // iff We know the shift amount is in range.
  // TODO: when is it worth doing SUB(BW, N2) as well?
  if (isPowerOf2_32(BitWidth)) {
    APInt ModuloBits(N2.getScalarValueSizeInBits(), BitWidth - 1);
    if (IsUndefOrZero(N0) && !IsFSHL && DAG.MaskedValueIsZero(N2, ~ModuloBits))
      return DAG.getNode(ISD::SRL, DL, VT, N1, N2);
    if (IsUndefOrZero(N1) && IsFSHL && DAG.MaskedValueIsZero(N2, ~ModuloBits))
      return DAG.getNode(ISD::SHL, DL, VT, N0, N2);
  }

  // fold (fshl N0, N0, N2) -> (rotl N0, N2)
  // fold (fshr N0, N0, N2) -> (rotr N0, N2)
  // TODO: Investigate flipping this rotate if only one is legal.
  // If funnel shift is legal as well we might be better off avoiding
  // non-constant (BW - N2).
  unsigned RotOpc = IsFSHL ? ISD::ROTL : ISD::ROTR;
  if (N0 == N1 && hasOperation(RotOpc, VT))
    return DAG.getNode(RotOpc, DL, VT, N0, N2);

  // Simplify, based on bits shifted out of N0/N1.
  if (SimplifyDemandedBits(SDValue(N, 0)))
    return SDValue(N, 0);

  return SDValue();
}

SDValue DAGCombiner::visitSHLSAT(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  if (SDValue V = DAG.simplifyShift(N0, N1))
    return V;

  SDLoc DL(N);
  EVT VT = N0.getValueType();

  // fold (*shlsat c1, c2) -> c1<<c2
  if (SDValue C = DAG.FoldConstantArithmetic(N->getOpcode(), DL, VT, {N0, N1}))
    return C;

  ConstantSDNode *N1C = isConstOrConstSplat(N1);

  if (!LegalOperations || TLI.isOperationLegalOrCustom(ISD::SHL, VT)) {
    // fold (sshlsat x, c) -> (shl x, c)
    if (N->getOpcode() == ISD::SSHLSAT && N1C &&
        N1C->getAPIntValue().ult(DAG.ComputeNumSignBits(N0)))
      return DAG.getNode(ISD::SHL, DL, VT, N0, N1);

    // fold (ushlsat x, c) -> (shl x, c)
    if (N->getOpcode() == ISD::USHLSAT && N1C &&
        N1C->getAPIntValue().ule(
            DAG.computeKnownBits(N0).countMinLeadingZeros()))
      return DAG.getNode(ISD::SHL, DL, VT, N0, N1);
  }

  return SDValue();
}

// Given a ABS node, detect the following patterns:
// (ABS (SUB (EXTEND a), (EXTEND b))).
// (TRUNC (ABS (SUB (EXTEND a), (EXTEND b)))).
// Generates UABD/SABD instruction.
SDValue DAGCombiner::foldABSToABD(SDNode *N, const SDLoc &DL) {
  EVT SrcVT = N->getValueType(0);

  if (N->getOpcode() == ISD::TRUNCATE)
    N = N->getOperand(0).getNode();

  if (N->getOpcode() != ISD::ABS)
    return SDValue();

  EVT VT = N->getValueType(0);
  SDValue AbsOp1 = N->getOperand(0);
  SDValue Op0, Op1;

  if (AbsOp1.getOpcode() != ISD::SUB)
    return SDValue();

  Op0 = AbsOp1.getOperand(0);
  Op1 = AbsOp1.getOperand(1);

  unsigned Opc0 = Op0.getOpcode();

  // Check if the operands of the sub are (zero|sign)-extended.
  // TODO: Should we use ValueTracking instead?
  if (Opc0 != Op1.getOpcode() ||
      (Opc0 != ISD::ZERO_EXTEND && Opc0 != ISD::SIGN_EXTEND &&
       Opc0 != ISD::SIGN_EXTEND_INREG)) {
    // fold (abs (sub nsw x, y)) -> abds(x, y)
    // Don't fold this for unsupported types as we lose the NSW handling.
    if (AbsOp1->getFlags().hasNoSignedWrap() && hasOperation(ISD::ABDS, VT) &&
        TLI.preferABDSToABSWithNSW(VT)) {
      SDValue ABD = DAG.getNode(ISD::ABDS, DL, VT, Op0, Op1);
      return DAG.getZExtOrTrunc(ABD, DL, SrcVT);
    }
    return SDValue();
  }

  EVT VT0, VT1;
  if (Opc0 == ISD::SIGN_EXTEND_INREG) {
    VT0 = cast<VTSDNode>(Op0.getOperand(1))->getVT();
    VT1 = cast<VTSDNode>(Op1.getOperand(1))->getVT();
  } else {
    VT0 = Op0.getOperand(0).getValueType();
    VT1 = Op1.getOperand(0).getValueType();
  }
  unsigned ABDOpcode = (Opc0 == ISD::ZERO_EXTEND) ? ISD::ABDU : ISD::ABDS;

  // fold abs(sext(x) - sext(y)) -> zext(abds(x, y))
  // fold abs(zext(x) - zext(y)) -> zext(abdu(x, y))
  EVT MaxVT = VT0.bitsGT(VT1) ? VT0 : VT1;
  if ((VT0 == MaxVT || Op0->hasOneUse()) &&
      (VT1 == MaxVT || Op1->hasOneUse()) &&
      (!LegalTypes || hasOperation(ABDOpcode, MaxVT))) {
    SDValue ABD = DAG.getNode(ABDOpcode, DL, MaxVT,
                              DAG.getNode(ISD::TRUNCATE, DL, MaxVT, Op0),
                              DAG.getNode(ISD::TRUNCATE, DL, MaxVT, Op1));
    ABD = DAG.getNode(ISD::ZERO_EXTEND, DL, VT, ABD);
    return DAG.getZExtOrTrunc(ABD, DL, SrcVT);
  }

  // fold abs(sext(x) - sext(y)) -> abds(sext(x), sext(y))
  // fold abs(zext(x) - zext(y)) -> abdu(zext(x), zext(y))
  if (!LegalOperations || hasOperation(ABDOpcode, VT)) {
    SDValue ABD = DAG.getNode(ABDOpcode, DL, VT, Op0, Op1);
    return DAG.getZExtOrTrunc(ABD, DL, SrcVT);
  }

  return SDValue();
}

SDValue DAGCombiner::visitABS(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // fold (abs c1) -> c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::ABS, DL, VT, {N0}))
    return C;
  // fold (abs (abs x)) -> (abs x)
  if (N0.getOpcode() == ISD::ABS)
    return N0;
  // fold (abs x) -> x iff not-negative
  if (DAG.SignBitIsZero(N0))
    return N0;

  if (SDValue ABD = foldABSToABD(N, DL))
    return ABD;

  // fold (abs (sign_extend_inreg x)) -> (zero_extend (abs (truncate x)))
  // iff zero_extend/truncate are free.
  if (N0.getOpcode() == ISD::SIGN_EXTEND_INREG) {
    EVT ExtVT = cast<VTSDNode>(N0.getOperand(1))->getVT();
    if (TLI.isTruncateFree(VT, ExtVT) && TLI.isZExtFree(ExtVT, VT) &&
        TLI.isTypeDesirableForOp(ISD::ABS, ExtVT) &&
        hasOperation(ISD::ABS, ExtVT)) {
      return DAG.getNode(
          ISD::ZERO_EXTEND, DL, VT,
          DAG.getNode(ISD::ABS, DL, ExtVT,
                      DAG.getNode(ISD::TRUNCATE, DL, ExtVT, N0.getOperand(0))));
    }
  }

  return SDValue();
}

SDValue DAGCombiner::visitBSWAP(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // fold (bswap c1) -> c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::BSWAP, DL, VT, {N0}))
    return C;
  // fold (bswap (bswap x)) -> x
  if (N0.getOpcode() == ISD::BSWAP)
    return N0.getOperand(0);

  // Canonicalize bswap(bitreverse(x)) -> bitreverse(bswap(x)). If bitreverse
  // isn't supported, it will be expanded to bswap followed by a manual reversal
  // of bits in each byte. By placing bswaps before bitreverse, we can remove
  // the two bswaps if the bitreverse gets expanded.
  if (N0.getOpcode() == ISD::BITREVERSE && N0.hasOneUse()) {
    SDValue BSwap = DAG.getNode(ISD::BSWAP, DL, VT, N0.getOperand(0));
    return DAG.getNode(ISD::BITREVERSE, DL, VT, BSwap);
  }

  // fold (bswap shl(x,c)) -> (zext(bswap(trunc(shl(x,sub(c,bw/2))))))
  // iff x >= bw/2 (i.e. lower half is known zero)
  unsigned BW = VT.getScalarSizeInBits();
  if (BW >= 32 && N0.getOpcode() == ISD::SHL && N0.hasOneUse()) {
    auto *ShAmt = dyn_cast<ConstantSDNode>(N0.getOperand(1));
    EVT HalfVT = EVT::getIntegerVT(*DAG.getContext(), BW / 2);
    if (ShAmt && ShAmt->getAPIntValue().ult(BW) &&
        ShAmt->getZExtValue() >= (BW / 2) &&
        (ShAmt->getZExtValue() % 16) == 0 && TLI.isTypeLegal(HalfVT) &&
        TLI.isTruncateFree(VT, HalfVT) &&
        (!LegalOperations || hasOperation(ISD::BSWAP, HalfVT))) {
      SDValue Res = N0.getOperand(0);
      if (uint64_t NewShAmt = (ShAmt->getZExtValue() - (BW / 2)))
        Res = DAG.getNode(ISD::SHL, DL, VT, Res,
                          DAG.getShiftAmountConstant(NewShAmt, VT, DL));
      Res = DAG.getZExtOrTrunc(Res, DL, HalfVT);
      Res = DAG.getNode(ISD::BSWAP, DL, HalfVT, Res);
      return DAG.getZExtOrTrunc(Res, DL, VT);
    }
  }

  // Try to canonicalize bswap-of-logical-shift-by-8-bit-multiple as
  // inverse-shift-of-bswap:
  // bswap (X u<< C) --> (bswap X) u>> C
  // bswap (X u>> C) --> (bswap X) u<< C
  if ((N0.getOpcode() == ISD::SHL || N0.getOpcode() == ISD::SRL) &&
      N0.hasOneUse()) {
    auto *ShAmt = dyn_cast<ConstantSDNode>(N0.getOperand(1));
    if (ShAmt && ShAmt->getAPIntValue().ult(BW) &&
        ShAmt->getZExtValue() % 8 == 0) {
      SDValue NewSwap = DAG.getNode(ISD::BSWAP, DL, VT, N0.getOperand(0));
      unsigned InverseShift = N0.getOpcode() == ISD::SHL ? ISD::SRL : ISD::SHL;
      return DAG.getNode(InverseShift, DL, VT, NewSwap, N0.getOperand(1));
    }
  }

  if (SDValue V = foldBitOrderCrossLogicOp(N, DAG))
    return V;

  return SDValue();
}

SDValue DAGCombiner::visitBITREVERSE(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // fold (bitreverse c1) -> c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::BITREVERSE, DL, VT, {N0}))
    return C;

  // fold (bitreverse (bitreverse x)) -> x
  if (N0.getOpcode() == ISD::BITREVERSE)
    return N0.getOperand(0);

  SDValue X, Y;

  // fold (bitreverse (lshr (bitreverse x), y)) -> (shl x, y)
  if ((!LegalOperations || TLI.isOperationLegal(ISD::SHL, VT)) &&
      sd_match(N, m_BitReverse(m_Srl(m_BitReverse(m_Value(X)), m_Value(Y)))))
    return DAG.getNode(ISD::SHL, DL, VT, X, Y);

  // fold (bitreverse (shl (bitreverse x), y)) -> (lshr x, y)
  if ((!LegalOperations || TLI.isOperationLegal(ISD::SRL, VT)) &&
      sd_match(N, m_BitReverse(m_Shl(m_BitReverse(m_Value(X)), m_Value(Y)))))
    return DAG.getNode(ISD::SRL, DL, VT, X, Y);

  return SDValue();
}

SDValue DAGCombiner::visitCTLZ(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // fold (ctlz c1) -> c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::CTLZ, DL, VT, {N0}))
    return C;

  // If the value is known never to be zero, switch to the undef version.
  if (!LegalOperations || TLI.isOperationLegal(ISD::CTLZ_ZERO_UNDEF, VT))
    if (DAG.isKnownNeverZero(N0))
      return DAG.getNode(ISD::CTLZ_ZERO_UNDEF, DL, VT, N0);

  return SDValue();
}

SDValue DAGCombiner::visitCTLZ_ZERO_UNDEF(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // fold (ctlz_zero_undef c1) -> c2
  if (SDValue C =
          DAG.FoldConstantArithmetic(ISD::CTLZ_ZERO_UNDEF, DL, VT, {N0}))
    return C;
  return SDValue();
}

SDValue DAGCombiner::visitCTTZ(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // fold (cttz c1) -> c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::CTTZ, DL, VT, {N0}))
    return C;

  // If the value is known never to be zero, switch to the undef version.
  if (!LegalOperations || TLI.isOperationLegal(ISD::CTTZ_ZERO_UNDEF, VT))
    if (DAG.isKnownNeverZero(N0))
      return DAG.getNode(ISD::CTTZ_ZERO_UNDEF, DL, VT, N0);

  return SDValue();
}

SDValue DAGCombiner::visitCTTZ_ZERO_UNDEF(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // fold (cttz_zero_undef c1) -> c2
  if (SDValue C =
          DAG.FoldConstantArithmetic(ISD::CTTZ_ZERO_UNDEF, DL, VT, {N0}))
    return C;
  return SDValue();
}

SDValue DAGCombiner::visitCTPOP(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  unsigned NumBits = VT.getScalarSizeInBits();
  SDLoc DL(N);

  // fold (ctpop c1) -> c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::CTPOP, DL, VT, {N0}))
    return C;

  // If the source is being shifted, but doesn't affect any active bits,
  // then we can call CTPOP on the shift source directly.
  if (N0.getOpcode() == ISD::SRL || N0.getOpcode() == ISD::SHL) {
    if (ConstantSDNode *AmtC = isConstOrConstSplat(N0.getOperand(1))) {
      const APInt &Amt = AmtC->getAPIntValue();
      if (Amt.ult(NumBits)) {
        KnownBits KnownSrc = DAG.computeKnownBits(N0.getOperand(0));
        if ((N0.getOpcode() == ISD::SRL &&
             Amt.ule(KnownSrc.countMinTrailingZeros())) ||
            (N0.getOpcode() == ISD::SHL &&
             Amt.ule(KnownSrc.countMinLeadingZeros()))) {
          return DAG.getNode(ISD::CTPOP, DL, VT, N0.getOperand(0));
        }
      }
    }
  }

  // If the upper bits are known to be zero, then see if its profitable to
  // only count the lower bits.
  if (VT.isScalarInteger() && NumBits > 8 && (NumBits & 1) == 0) {
    EVT HalfVT = EVT::getIntegerVT(*DAG.getContext(), NumBits / 2);
    if (hasOperation(ISD::CTPOP, HalfVT) &&
        TLI.isTypeDesirableForOp(ISD::CTPOP, HalfVT) &&
        TLI.isTruncateFree(N0, HalfVT) && TLI.isZExtFree(HalfVT, VT)) {
      APInt UpperBits = APInt::getHighBitsSet(NumBits, NumBits / 2);
      if (DAG.MaskedValueIsZero(N0, UpperBits)) {
        SDValue PopCnt = DAG.getNode(ISD::CTPOP, DL, HalfVT,
                                     DAG.getZExtOrTrunc(N0, DL, HalfVT));
        return DAG.getZExtOrTrunc(PopCnt, DL, VT);
      }
    }
  }

  return SDValue();
}

static bool isLegalToCombineMinNumMaxNum(SelectionDAG &DAG, SDValue LHS,
                                         SDValue RHS, const SDNodeFlags Flags,
                                         const TargetLowering &TLI) {
  EVT VT = LHS.getValueType();
  if (!VT.isFloatingPoint())
    return false;

  const TargetOptions &Options = DAG.getTarget().Options;

  return (Flags.hasNoSignedZeros() || Options.NoSignedZerosFPMath) &&
         TLI.isProfitableToCombineMinNumMaxNum(VT) &&
         (Flags.hasNoNaNs() ||
          (DAG.isKnownNeverNaN(RHS) && DAG.isKnownNeverNaN(LHS)));
}

static SDValue combineMinNumMaxNumImpl(const SDLoc &DL, EVT VT, SDValue LHS,
                                       SDValue RHS, SDValue True, SDValue False,
                                       ISD::CondCode CC,
                                       const TargetLowering &TLI,
                                       SelectionDAG &DAG) {
  EVT TransformVT = TLI.getTypeToTransformTo(*DAG.getContext(), VT);
  switch (CC) {
  case ISD::SETOLT:
  case ISD::SETOLE:
  case ISD::SETLT:
  case ISD::SETLE:
  case ISD::SETULT:
  case ISD::SETULE: {
    // Since it's known never nan to get here already, either fminnum or
    // fminnum_ieee are OK. Try the ieee version first, since it's fminnum is
    // expanded in terms of it.
    unsigned IEEEOpcode = (LHS == True) ? ISD::FMINNUM_IEEE : ISD::FMAXNUM_IEEE;
    if (TLI.isOperationLegalOrCustom(IEEEOpcode, VT))
      return DAG.getNode(IEEEOpcode, DL, VT, LHS, RHS);

    unsigned Opcode = (LHS == True) ? ISD::FMINNUM : ISD::FMAXNUM;
    if (TLI.isOperationLegalOrCustom(Opcode, TransformVT))
      return DAG.getNode(Opcode, DL, VT, LHS, RHS);
    return SDValue();
  }
  case ISD::SETOGT:
  case ISD::SETOGE:
  case ISD::SETGT:
  case ISD::SETGE:
  case ISD::SETUGT:
  case ISD::SETUGE: {
    unsigned IEEEOpcode = (LHS == True) ? ISD::FMAXNUM_IEEE : ISD::FMINNUM_IEEE;
    if (TLI.isOperationLegalOrCustom(IEEEOpcode, VT))
      return DAG.getNode(IEEEOpcode, DL, VT, LHS, RHS);

    unsigned Opcode = (LHS == True) ? ISD::FMAXNUM : ISD::FMINNUM;
    if (TLI.isOperationLegalOrCustom(Opcode, TransformVT))
      return DAG.getNode(Opcode, DL, VT, LHS, RHS);
    return SDValue();
  }
  default:
    return SDValue();
  }
}

SDValue DAGCombiner::foldShiftToAvg(SDNode *N) {
  const unsigned Opcode = N->getOpcode();

  // Convert (sr[al] (add n[su]w x, y)) -> (avgfloor[su] x, y)
  if (Opcode != ISD::SRA && Opcode != ISD::SRL)
    return SDValue();

  unsigned FloorISD = 0;
  auto VT = N->getValueType(0);
  bool IsUnsigned = false;

  // Decide wether signed or unsigned.
  switch (Opcode) {
  case ISD::SRA:
    if (!hasOperation(ISD::AVGFLOORS, VT))
      return SDValue();
    FloorISD = ISD::AVGFLOORS;
    break;
  case ISD::SRL:
    IsUnsigned = true;
    if (!hasOperation(ISD::AVGFLOORU, VT))
      return SDValue();
    FloorISD = ISD::AVGFLOORU;
    break;
  default:
    return SDValue();
  }

  // Captured values.
  SDValue A, B, Add;

  // Match floor average as it is common to both floor/ceil avgs.
  if (!sd_match(N, m_BinOp(Opcode,
                           m_AllOf(m_Value(Add), m_Add(m_Value(A), m_Value(B))),
                           m_One())))
    return SDValue();

  // Can't optimize adds that may wrap.
  if (IsUnsigned && !Add->getFlags().hasNoUnsignedWrap())
    return SDValue();

  if (!IsUnsigned && !Add->getFlags().hasNoSignedWrap())
    return SDValue();

  return DAG.getNode(FloorISD, SDLoc(N), N->getValueType(0), {A, B});
}

/// Generate Min/Max node
SDValue DAGCombiner::combineMinNumMaxNum(const SDLoc &DL, EVT VT, SDValue LHS,
                                         SDValue RHS, SDValue True,
                                         SDValue False, ISD::CondCode CC) {
  if ((LHS == True && RHS == False) || (LHS == False && RHS == True))
    return combineMinNumMaxNumImpl(DL, VT, LHS, RHS, True, False, CC, TLI, DAG);

  // If we can't directly match this, try to see if we can pull an fneg out of
  // the select.
  SDValue NegTrue = TLI.getCheaperOrNeutralNegatedExpression(
      True, DAG, LegalOperations, ForCodeSize);
  if (!NegTrue)
    return SDValue();

  HandleSDNode NegTrueHandle(NegTrue);

  // Try to unfold an fneg from the select if we are comparing the negated
  // constant.
  //
  // select (setcc x, K) (fneg x), -K -> fneg(minnum(x, K))
  //
  // TODO: Handle fabs
  if (LHS == NegTrue) {
    // If we can't directly match this, try to see if we can pull an fneg out of
    // the select.
    SDValue NegRHS = TLI.getCheaperOrNeutralNegatedExpression(
        RHS, DAG, LegalOperations, ForCodeSize);
    if (NegRHS) {
      HandleSDNode NegRHSHandle(NegRHS);
      if (NegRHS == False) {
        SDValue Combined = combineMinNumMaxNumImpl(DL, VT, LHS, RHS, NegTrue,
                                                   False, CC, TLI, DAG);
        if (Combined)
          return DAG.getNode(ISD::FNEG, DL, VT, Combined);
      }
    }
  }

  return SDValue();
}

/// If a (v)select has a condition value that is a sign-bit test, try to smear
/// the condition operand sign-bit across the value width and use it as a mask.
static SDValue foldSelectOfConstantsUsingSra(SDNode *N, const SDLoc &DL,
                                             SelectionDAG &DAG) {
  SDValue Cond = N->getOperand(0);
  SDValue C1 = N->getOperand(1);
  SDValue C2 = N->getOperand(2);
  if (!isConstantOrConstantVector(C1) || !isConstantOrConstantVector(C2))
    return SDValue();

  EVT VT = N->getValueType(0);
  if (Cond.getOpcode() != ISD::SETCC || !Cond.hasOneUse() ||
      VT != Cond.getOperand(0).getValueType())
    return SDValue();

  // The inverted-condition + commuted-select variants of these patterns are
  // canonicalized to these forms in IR.
  SDValue X = Cond.getOperand(0);
  SDValue CondC = Cond.getOperand(1);
  ISD::CondCode CC = cast<CondCodeSDNode>(Cond.getOperand(2))->get();
  if (CC == ISD::SETGT && isAllOnesOrAllOnesSplat(CondC) &&
      isAllOnesOrAllOnesSplat(C2)) {
    // i32 X > -1 ? C1 : -1 --> (X >>s 31) | C1
    SDValue ShAmtC = DAG.getConstant(X.getScalarValueSizeInBits() - 1, DL, VT);
    SDValue Sra = DAG.getNode(ISD::SRA, DL, VT, X, ShAmtC);
    return DAG.getNode(ISD::OR, DL, VT, Sra, C1);
  }
  if (CC == ISD::SETLT && isNullOrNullSplat(CondC) && isNullOrNullSplat(C2)) {
    // i8 X < 0 ? C1 : 0 --> (X >>s 7) & C1
    SDValue ShAmtC = DAG.getConstant(X.getScalarValueSizeInBits() - 1, DL, VT);
    SDValue Sra = DAG.getNode(ISD::SRA, DL, VT, X, ShAmtC);
    return DAG.getNode(ISD::AND, DL, VT, Sra, C1);
  }
  return SDValue();
}

static bool shouldConvertSelectOfConstantsToMath(const SDValue &Cond, EVT VT,
                                                 const TargetLowering &TLI) {
  if (!TLI.convertSelectOfConstantsToMath(VT))
    return false;

  if (Cond.getOpcode() != ISD::SETCC || !Cond->hasOneUse())
    return true;
  if (!TLI.isOperationLegalOrCustom(ISD::SELECT_CC, VT))
    return true;

  ISD::CondCode CC = cast<CondCodeSDNode>(Cond.getOperand(2))->get();
  if (CC == ISD::SETLT && isNullOrNullSplat(Cond.getOperand(1)))
    return true;
  if (CC == ISD::SETGT && isAllOnesOrAllOnesSplat(Cond.getOperand(1)))
    return true;

  return false;
}

SDValue DAGCombiner::foldSelectOfConstants(SDNode *N) {
  SDValue Cond = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue N2 = N->getOperand(2);
  EVT VT = N->getValueType(0);
  EVT CondVT = Cond.getValueType();
  SDLoc DL(N);

  if (!VT.isInteger())
    return SDValue();

  auto *C1 = dyn_cast<ConstantSDNode>(N1);
  auto *C2 = dyn_cast<ConstantSDNode>(N2);
  if (!C1 || !C2)
    return SDValue();

  if (CondVT != MVT::i1 || LegalOperations) {
    // fold (select Cond, 0, 1) -> (xor Cond, 1)
    // We can't do this reliably if integer based booleans have different contents
    // to floating point based booleans. This is because we can't tell whether we
    // have an integer-based boolean or a floating-point-based boolean unless we
    // can find the SETCC that produced it and inspect its operands. This is
    // fairly easy if C is the SETCC node, but it can potentially be
    // undiscoverable (or not reasonably discoverable). For example, it could be
    // in another basic block or it could require searching a complicated
    // expression.
    if (CondVT.isInteger() &&
        TLI.getBooleanContents(/*isVec*/false, /*isFloat*/true) ==
            TargetLowering::ZeroOrOneBooleanContent &&
        TLI.getBooleanContents(/*isVec*/false, /*isFloat*/false) ==
            TargetLowering::ZeroOrOneBooleanContent &&
        C1->isZero() && C2->isOne()) {
      SDValue NotCond =
          DAG.getNode(ISD::XOR, DL, CondVT, Cond, DAG.getConstant(1, DL, CondVT));
      if (VT.bitsEq(CondVT))
        return NotCond;
      return DAG.getZExtOrTrunc(NotCond, DL, VT);
    }

    return SDValue();
  }

  // Only do this before legalization to avoid conflicting with target-specific
  // transforms in the other direction (create a select from a zext/sext). There
  // is also a target-independent combine here in DAGCombiner in the other
  // direction for (select Cond, -1, 0) when the condition is not i1.
  assert(CondVT == MVT::i1 && !LegalOperations);

  // select Cond, 1, 0 --> zext (Cond)
  if (C1->isOne() && C2->isZero())
    return DAG.getZExtOrTrunc(Cond, DL, VT);

  // select Cond, -1, 0 --> sext (Cond)
  if (C1->isAllOnes() && C2->isZero())
    return DAG.getSExtOrTrunc(Cond, DL, VT);

  // select Cond, 0, 1 --> zext (!Cond)
  if (C1->isZero() && C2->isOne()) {
    SDValue NotCond = DAG.getNOT(DL, Cond, MVT::i1);
    NotCond = DAG.getZExtOrTrunc(NotCond, DL, VT);
    return NotCond;
  }

  // select Cond, 0, -1 --> sext (!Cond)
  if (C1->isZero() && C2->isAllOnes()) {
    SDValue NotCond = DAG.getNOT(DL, Cond, MVT::i1);
    NotCond = DAG.getSExtOrTrunc(NotCond, DL, VT);
    return NotCond;
  }

  // Use a target hook because some targets may prefer to transform in the
  // other direction.
  if (!shouldConvertSelectOfConstantsToMath(Cond, VT, TLI))
    return SDValue();

  // For any constants that differ by 1, we can transform the select into
  // an extend and add.
  const APInt &C1Val = C1->getAPIntValue();
  const APInt &C2Val = C2->getAPIntValue();

  // select Cond, C1, C1-1 --> add (zext Cond), C1-1
  if (C1Val - 1 == C2Val) {
    Cond = DAG.getZExtOrTrunc(Cond, DL, VT);
    return DAG.getNode(ISD::ADD, DL, VT, Cond, N2);
  }

  // select Cond, C1, C1+1 --> add (sext Cond), C1+1
  if (C1Val + 1 == C2Val) {
    Cond = DAG.getSExtOrTrunc(Cond, DL, VT);
    return DAG.getNode(ISD::ADD, DL, VT, Cond, N2);
  }

  // select Cond, Pow2, 0 --> (zext Cond) << log2(Pow2)
  if (C1Val.isPowerOf2() && C2Val.isZero()) {
    Cond = DAG.getZExtOrTrunc(Cond, DL, VT);
    SDValue ShAmtC =
        DAG.getShiftAmountConstant(C1Val.exactLogBase2(), VT, DL);
    return DAG.getNode(ISD::SHL, DL, VT, Cond, ShAmtC);
  }

  // select Cond, -1, C --> or (sext Cond), C
  if (C1->isAllOnes()) {
    Cond = DAG.getSExtOrTrunc(Cond, DL, VT);
    return DAG.getNode(ISD::OR, DL, VT, Cond, N2);
  }

  // select Cond, C, -1 --> or (sext (not Cond)), C
  if (C2->isAllOnes()) {
    SDValue NotCond = DAG.getNOT(DL, Cond, MVT::i1);
    NotCond = DAG.getSExtOrTrunc(NotCond, DL, VT);
    return DAG.getNode(ISD::OR, DL, VT, NotCond, N1);
  }

  if (SDValue V = foldSelectOfConstantsUsingSra(N, DL, DAG))
    return V;

  return SDValue();
}

template <class MatchContextClass>
static SDValue foldBoolSelectToLogic(SDNode *N, const SDLoc &DL,
                                     SelectionDAG &DAG) {
  assert((N->getOpcode() == ISD::SELECT || N->getOpcode() == ISD::VSELECT ||
          N->getOpcode() == ISD::VP_SELECT) &&
         "Expected a (v)(vp.)select");
  SDValue Cond = N->getOperand(0);
  SDValue T = N->getOperand(1), F = N->getOperand(2);
  EVT VT = N->getValueType(0);
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  MatchContextClass matcher(DAG, TLI, N);

  if (VT != Cond.getValueType() || VT.getScalarSizeInBits() != 1)
    return SDValue();

  // select Cond, Cond, F --> or Cond, freeze(F)
  // select Cond, 1, F    --> or Cond, freeze(F)
  if (Cond == T || isOneOrOneSplat(T, /* AllowUndefs */ true))
    return matcher.getNode(ISD::OR, DL, VT, Cond, DAG.getFreeze(F));

  // select Cond, T, Cond --> and Cond, freeze(T)
  // select Cond, T, 0    --> and Cond, freeze(T)
  if (Cond == F || isNullOrNullSplat(F, /* AllowUndefs */ true))
    return matcher.getNode(ISD::AND, DL, VT, Cond, DAG.getFreeze(T));

  // select Cond, T, 1 --> or (not Cond), freeze(T)
  if (isOneOrOneSplat(F, /* AllowUndefs */ true)) {
    SDValue NotCond =
        matcher.getNode(ISD::XOR, DL, VT, Cond, DAG.getAllOnesConstant(DL, VT));
    return matcher.getNode(ISD::OR, DL, VT, NotCond, DAG.getFreeze(T));
  }

  // select Cond, 0, F --> and (not Cond), freeze(F)
  if (isNullOrNullSplat(T, /* AllowUndefs */ true)) {
    SDValue NotCond =
        matcher.getNode(ISD::XOR, DL, VT, Cond, DAG.getAllOnesConstant(DL, VT));
    return matcher.getNode(ISD::AND, DL, VT, NotCond, DAG.getFreeze(F));
  }

  return SDValue();
}

static SDValue foldVSelectToSignBitSplatMask(SDNode *N, SelectionDAG &DAG) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue N2 = N->getOperand(2);
  EVT VT = N->getValueType(0);
  unsigned EltSizeInBits = VT.getScalarSizeInBits();

  SDValue Cond0, Cond1;
  ISD::CondCode CC;
  if (!sd_match(N0, m_OneUse(m_SetCC(m_Value(Cond0), m_Value(Cond1),
                                     m_CondCode(CC)))) ||
      VT != Cond0.getValueType())
    return SDValue();

  // Match a signbit check of Cond0 as "Cond0 s<0". Swap select operands if the
  // compare is inverted from that pattern ("Cond0 s> -1").
  if (CC == ISD::SETLT && isNullOrNullSplat(Cond1))
    ; // This is the pattern we are looking for.
  else if (CC == ISD::SETGT && isAllOnesOrAllOnesSplat(Cond1))
    std::swap(N1, N2);
  else
    return SDValue();

  // (Cond0 s< 0) ? N1 : 0 --> (Cond0 s>> BW-1) & freeze(N1)
  if (isNullOrNullSplat(N2)) {
    SDLoc DL(N);
    SDValue ShiftAmt = DAG.getShiftAmountConstant(EltSizeInBits - 1, VT, DL);
    SDValue Sra = DAG.getNode(ISD::SRA, DL, VT, Cond0, ShiftAmt);
    return DAG.getNode(ISD::AND, DL, VT, Sra, DAG.getFreeze(N1));
  }

  // (Cond0 s< 0) ? -1 : N2 --> (Cond0 s>> BW-1) | freeze(N2)
  if (isAllOnesOrAllOnesSplat(N1)) {
    SDLoc DL(N);
    SDValue ShiftAmt = DAG.getShiftAmountConstant(EltSizeInBits - 1, VT, DL);
    SDValue Sra = DAG.getNode(ISD::SRA, DL, VT, Cond0, ShiftAmt);
    return DAG.getNode(ISD::OR, DL, VT, Sra, DAG.getFreeze(N2));
  }

  // If we have to invert the sign bit mask, only do that transform if the
  // target has a bitwise 'and not' instruction (the invert is free).
  // (Cond0 s< -0) ? 0 : N2 --> ~(Cond0 s>> BW-1) & freeze(N2)
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  if (isNullOrNullSplat(N1) && TLI.hasAndNot(N1)) {
    SDLoc DL(N);
    SDValue ShiftAmt = DAG.getShiftAmountConstant(EltSizeInBits - 1, VT, DL);
    SDValue Sra = DAG.getNode(ISD::SRA, DL, VT, Cond0, ShiftAmt);
    SDValue Not = DAG.getNOT(DL, Sra, VT);
    return DAG.getNode(ISD::AND, DL, VT, Not, DAG.getFreeze(N2));
  }

  // TODO: There's another pattern in this family, but it may require
  //       implementing hasOrNot() to check for profitability:
  //       (Cond0 s> -1) ? -1 : N2 --> ~(Cond0 s>> BW-1) | freeze(N2)

  return SDValue();
}

// Match SELECTs with absolute difference patterns.
// (select (setcc a, b, set?gt), (sub a, b), (sub b, a)) --> (abd? a, b)
// (select (setcc a, b, set?ge), (sub a, b), (sub b, a)) --> (abd? a, b)
// (select (setcc a, b, set?lt), (sub b, a), (sub a, b)) --> (abd? a, b)
// (select (setcc a, b, set?le), (sub b, a), (sub a, b)) --> (abd? a, b)
SDValue DAGCombiner::foldSelectToABD(SDValue LHS, SDValue RHS, SDValue True,
                                     SDValue False, ISD::CondCode CC,
                                     const SDLoc &DL) {
  bool IsSigned = isSignedIntSetCC(CC);
  unsigned ABDOpc = IsSigned ? ISD::ABDS : ISD::ABDU;
  EVT VT = LHS.getValueType();

  if (LegalOperations && !hasOperation(ABDOpc, VT))
    return SDValue();

  switch (CC) {
  case ISD::SETGT:
  case ISD::SETGE:
  case ISD::SETUGT:
  case ISD::SETUGE:
    if (sd_match(True, m_Sub(m_Specific(LHS), m_Specific(RHS))) &&
        sd_match(False, m_Sub(m_Specific(RHS), m_Specific(LHS))))
      return DAG.getNode(ABDOpc, DL, VT, LHS, RHS);
    if (sd_match(True, m_Sub(m_Specific(RHS), m_Specific(LHS))) &&
        sd_match(False, m_Sub(m_Specific(LHS), m_Specific(RHS))) &&
        hasOperation(ABDOpc, VT))
      return DAG.getNegative(DAG.getNode(ABDOpc, DL, VT, LHS, RHS), DL, VT);
    break;
  case ISD::SETLT:
  case ISD::SETLE:
  case ISD::SETULT:
  case ISD::SETULE:
    if (sd_match(True, m_Sub(m_Specific(RHS), m_Specific(LHS))) &&
        sd_match(False, m_Sub(m_Specific(LHS), m_Specific(RHS))))
      return DAG.getNode(ABDOpc, DL, VT, LHS, RHS);
    if (sd_match(True, m_Sub(m_Specific(LHS), m_Specific(RHS))) &&
        sd_match(False, m_Sub(m_Specific(RHS), m_Specific(LHS))) &&
        hasOperation(ABDOpc, VT))
      return DAG.getNegative(DAG.getNode(ABDOpc, DL, VT, LHS, RHS), DL, VT);
    break;
  default:
    break;
  }

  return SDValue();
}

SDValue DAGCombiner::visitSELECT(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue N2 = N->getOperand(2);
  EVT VT = N->getValueType(0);
  EVT VT0 = N0.getValueType();
  SDLoc DL(N);
  SDNodeFlags Flags = N->getFlags();

  if (SDValue V = DAG.simplifySelect(N0, N1, N2))
    return V;

  if (SDValue V = foldBoolSelectToLogic<EmptyMatchContext>(N, DL, DAG))
    return V;

  // select (not Cond), N1, N2 -> select Cond, N2, N1
  if (SDValue F = extractBooleanFlip(N0, DAG, TLI, false)) {
    SDValue SelectOp = DAG.getSelect(DL, VT, F, N2, N1);
    SelectOp->setFlags(Flags);
    return SelectOp;
  }

  if (SDValue V = foldSelectOfConstants(N))
    return V;

  // If we can fold this based on the true/false value, do so.
  if (SimplifySelectOps(N, N1, N2))
    return SDValue(N, 0); // Don't revisit N.

  if (VT0 == MVT::i1) {
    // The code in this block deals with the following 2 equivalences:
    //    select(C0|C1, x, y) <=> select(C0, x, select(C1, x, y))
    //    select(C0&C1, x, y) <=> select(C0, select(C1, x, y), y)
    // The target can specify its preferred form with the
    // shouldNormalizeToSelectSequence() callback. However we always transform
    // to the right anyway if we find the inner select exists in the DAG anyway
    // and we always transform to the left side if we know that we can further
    // optimize the combination of the conditions.
    bool normalizeToSequence =
        TLI.shouldNormalizeToSelectSequence(*DAG.getContext(), VT);
    // select (and Cond0, Cond1), X, Y
    //   -> select Cond0, (select Cond1, X, Y), Y
    if (N0->getOpcode() == ISD::AND && N0->hasOneUse()) {
      SDValue Cond0 = N0->getOperand(0);
      SDValue Cond1 = N0->getOperand(1);
      SDValue InnerSelect =
          DAG.getNode(ISD::SELECT, DL, N1.getValueType(), Cond1, N1, N2, Flags);
      if (normalizeToSequence || !InnerSelect.use_empty())
        return DAG.getNode(ISD::SELECT, DL, N1.getValueType(), Cond0,
                           InnerSelect, N2, Flags);
      // Cleanup on failure.
      if (InnerSelect.use_empty())
        recursivelyDeleteUnusedNodes(InnerSelect.getNode());
    }
    // select (or Cond0, Cond1), X, Y -> select Cond0, X, (select Cond1, X, Y)
    if (N0->getOpcode() == ISD::OR && N0->hasOneUse()) {
      SDValue Cond0 = N0->getOperand(0);
      SDValue Cond1 = N0->getOperand(1);
      SDValue InnerSelect = DAG.getNode(ISD::SELECT, DL, N1.getValueType(),
                                        Cond1, N1, N2, Flags);
      if (normalizeToSequence || !InnerSelect.use_empty())
        return DAG.getNode(ISD::SELECT, DL, N1.getValueType(), Cond0, N1,
                           InnerSelect, Flags);
      // Cleanup on failure.
      if (InnerSelect.use_empty())
        recursivelyDeleteUnusedNodes(InnerSelect.getNode());
    }

    // select Cond0, (select Cond1, X, Y), Y -> select (and Cond0, Cond1), X, Y
    if (N1->getOpcode() == ISD::SELECT && N1->hasOneUse()) {
      SDValue N1_0 = N1->getOperand(0);
      SDValue N1_1 = N1->getOperand(1);
      SDValue N1_2 = N1->getOperand(2);
      if (N1_2 == N2 && N0.getValueType() == N1_0.getValueType()) {
        // Create the actual and node if we can generate good code for it.
        if (!normalizeToSequence) {
          SDValue And = DAG.getNode(ISD::AND, DL, N0.getValueType(), N0, N1_0);
          return DAG.getNode(ISD::SELECT, DL, N1.getValueType(), And, N1_1,
                             N2, Flags);
        }
        // Otherwise see if we can optimize the "and" to a better pattern.
        if (SDValue Combined = visitANDLike(N0, N1_0, N)) {
          return DAG.getNode(ISD::SELECT, DL, N1.getValueType(), Combined, N1_1,
                             N2, Flags);
        }
      }
    }
    // select Cond0, X, (select Cond1, X, Y) -> select (or Cond0, Cond1), X, Y
    if (N2->getOpcode() == ISD::SELECT && N2->hasOneUse()) {
      SDValue N2_0 = N2->getOperand(0);
      SDValue N2_1 = N2->getOperand(1);
      SDValue N2_2 = N2->getOperand(2);
      if (N2_1 == N1 && N0.getValueType() == N2_0.getValueType()) {
        // Create the actual or node if we can generate good code for it.
        if (!normalizeToSequence) {
          SDValue Or = DAG.getNode(ISD::OR, DL, N0.getValueType(), N0, N2_0);
          return DAG.getNode(ISD::SELECT, DL, N1.getValueType(), Or, N1,
                             N2_2, Flags);
        }
        // Otherwise see if we can optimize to a better pattern.
        if (SDValue Combined = visitORLike(N0, N2_0, DL))
          return DAG.getNode(ISD::SELECT, DL, N1.getValueType(), Combined, N1,
                             N2_2, Flags);
      }
    }

    // select usubo(x, y).overflow, (sub y, x), (usubo x, y) -> abdu(x, y)
    if (N0.getOpcode() == ISD::USUBO && N0.getResNo() == 1 &&
        N2.getNode() == N0.getNode() && N2.getResNo() == 0 &&
        N1.getOpcode() == ISD::SUB && N2.getOperand(0) == N1.getOperand(1) &&
        N2.getOperand(1) == N1.getOperand(0) &&
        (!LegalOperations || TLI.isOperationLegal(ISD::ABDU, VT)))
      return DAG.getNode(ISD::ABDU, DL, VT, N0.getOperand(0), N0.getOperand(1));

    // select usubo(x, y).overflow, (usubo x, y), (sub y, x) -> neg (abdu x, y)
    if (N0.getOpcode() == ISD::USUBO && N0.getResNo() == 1 &&
        N1.getNode() == N0.getNode() && N1.getResNo() == 0 &&
        N2.getOpcode() == ISD::SUB && N2.getOperand(0) == N1.getOperand(1) &&
        N2.getOperand(1) == N1.getOperand(0) &&
        (!LegalOperations || TLI.isOperationLegal(ISD::ABDU, VT)))
      return DAG.getNegative(
          DAG.getNode(ISD::ABDU, DL, VT, N0.getOperand(0), N0.getOperand(1)),
          DL, VT);
  }

  // Fold selects based on a setcc into other things, such as min/max/abs.
  if (N0.getOpcode() == ISD::SETCC) {
    SDValue Cond0 = N0.getOperand(0), Cond1 = N0.getOperand(1);
    ISD::CondCode CC = cast<CondCodeSDNode>(N0.getOperand(2))->get();

    // select (fcmp lt x, y), x, y -> fminnum x, y
    // select (fcmp gt x, y), x, y -> fmaxnum x, y
    //
    // This is OK if we don't care what happens if either operand is a NaN.
    if (N0.hasOneUse() && isLegalToCombineMinNumMaxNum(DAG, N1, N2, Flags, TLI))
      if (SDValue FMinMax =
              combineMinNumMaxNum(DL, VT, Cond0, Cond1, N1, N2, CC))
        return FMinMax;

    // Use 'unsigned add with overflow' to optimize an unsigned saturating add.
    // This is conservatively limited to pre-legal-operations to give targets
    // a chance to reverse the transform if they want to do that. Also, it is
    // unlikely that the pattern would be formed late, so it's probably not
    // worth going through the other checks.
    if (!LegalOperations && TLI.isOperationLegalOrCustom(ISD::UADDO, VT) &&
        CC == ISD::SETUGT && N0.hasOneUse() && isAllOnesConstant(N1) &&
        N2.getOpcode() == ISD::ADD && Cond0 == N2.getOperand(0)) {
      auto *C = dyn_cast<ConstantSDNode>(N2.getOperand(1));
      auto *NotC = dyn_cast<ConstantSDNode>(Cond1);
      if (C && NotC && C->getAPIntValue() == ~NotC->getAPIntValue()) {
        // select (setcc Cond0, ~C, ugt), -1, (add Cond0, C) -->
        // uaddo Cond0, C; select uaddo.1, -1, uaddo.0
        //
        // The IR equivalent of this transform would have this form:
        //   %a = add %x, C
        //   %c = icmp ugt %x, ~C
        //   %r = select %c, -1, %a
        //   =>
        //   %u = call {iN,i1} llvm.uadd.with.overflow(%x, C)
        //   %u0 = extractvalue %u, 0
        //   %u1 = extractvalue %u, 1
        //   %r = select %u1, -1, %u0
        SDVTList VTs = DAG.getVTList(VT, VT0);
        SDValue UAO = DAG.getNode(ISD::UADDO, DL, VTs, Cond0, N2.getOperand(1));
        return DAG.getSelect(DL, VT, UAO.getValue(1), N1, UAO.getValue(0));
      }
    }

    if (TLI.isOperationLegal(ISD::SELECT_CC, VT) ||
        (!LegalOperations &&
         TLI.isOperationLegalOrCustom(ISD::SELECT_CC, VT))) {
      // Any flags available in a select/setcc fold will be on the setcc as they
      // migrated from fcmp
      Flags = N0->getFlags();
      SDValue SelectNode = DAG.getNode(ISD::SELECT_CC, DL, VT, Cond0, Cond1, N1,
                                       N2, N0.getOperand(2));
      SelectNode->setFlags(Flags);
      return SelectNode;
    }

    if (SDValue ABD = foldSelectToABD(Cond0, Cond1, N1, N2, CC, DL))
      return ABD;

    if (SDValue NewSel = SimplifySelect(DL, N0, N1, N2))
      return NewSel;
  }

  if (!VT.isVector())
    if (SDValue BinOp = foldSelectOfBinops(N))
      return BinOp;

  if (SDValue R = combineSelectAsExtAnd(N0, N1, N2, DL, DAG))
    return R;

  return SDValue();
}

// This function assumes all the vselect's arguments are CONCAT_VECTOR
// nodes and that the condition is a BV of ConstantSDNodes (or undefs).
static SDValue ConvertSelectToConcatVector(SDNode *N, SelectionDAG &DAG) {
  SDLoc DL(N);
  SDValue Cond = N->getOperand(0);
  SDValue LHS = N->getOperand(1);
  SDValue RHS = N->getOperand(2);
  EVT VT = N->getValueType(0);
  int NumElems = VT.getVectorNumElements();
  assert(LHS.getOpcode() == ISD::CONCAT_VECTORS &&
         RHS.getOpcode() == ISD::CONCAT_VECTORS &&
         Cond.getOpcode() == ISD::BUILD_VECTOR);

  // CONCAT_VECTOR can take an arbitrary number of arguments. We only care about
  // binary ones here.
  if (LHS->getNumOperands() != 2 || RHS->getNumOperands() != 2)
    return SDValue();

  // We're sure we have an even number of elements due to the
  // concat_vectors we have as arguments to vselect.
  // Skip BV elements until we find one that's not an UNDEF
  // After we find an UNDEF element, keep looping until we get to half the
  // length of the BV and see if all the non-undef nodes are the same.
  ConstantSDNode *BottomHalf = nullptr;
  for (int i = 0; i < NumElems / 2; ++i) {
    if (Cond->getOperand(i)->isUndef())
      continue;

    if (BottomHalf == nullptr)
      BottomHalf = cast<ConstantSDNode>(Cond.getOperand(i));
    else if (Cond->getOperand(i).getNode() != BottomHalf)
      return SDValue();
  }

  // Do the same for the second half of the BuildVector
  ConstantSDNode *TopHalf = nullptr;
  for (int i = NumElems / 2; i < NumElems; ++i) {
    if (Cond->getOperand(i)->isUndef())
      continue;

    if (TopHalf == nullptr)
      TopHalf = cast<ConstantSDNode>(Cond.getOperand(i));
    else if (Cond->getOperand(i).getNode() != TopHalf)
      return SDValue();
  }

  assert(TopHalf && BottomHalf &&
         "One half of the selector was all UNDEFs and the other was all the "
         "same value. This should have been addressed before this function.");
  return DAG.getNode(
      ISD::CONCAT_VECTORS, DL, VT,
      BottomHalf->isZero() ? RHS->getOperand(0) : LHS->getOperand(0),
      TopHalf->isZero() ? RHS->getOperand(1) : LHS->getOperand(1));
}

bool refineUniformBase(SDValue &BasePtr, SDValue &Index, bool IndexIsScaled,
                       SelectionDAG &DAG, const SDLoc &DL) {

  // Only perform the transformation when existing operands can be reused.
  if (IndexIsScaled)
    return false;

  if (!isNullConstant(BasePtr) && !Index.hasOneUse())
    return false;

  EVT VT = BasePtr.getValueType();

  if (SDValue SplatVal = DAG.getSplatValue(Index);
      SplatVal && !isNullConstant(SplatVal) &&
      SplatVal.getValueType() == VT) {
    BasePtr = DAG.getNode(ISD::ADD, DL, VT, BasePtr, SplatVal);
    Index = DAG.getSplat(Index.getValueType(), DL, DAG.getConstant(0, DL, VT));
    return true;
  }

  if (Index.getOpcode() != ISD::ADD)
    return false;

  if (SDValue SplatVal = DAG.getSplatValue(Index.getOperand(0));
      SplatVal && SplatVal.getValueType() == VT) {
    BasePtr = DAG.getNode(ISD::ADD, DL, VT, BasePtr, SplatVal);
    Index = Index.getOperand(1);
    return true;
  }
  if (SDValue SplatVal = DAG.getSplatValue(Index.getOperand(1));
      SplatVal && SplatVal.getValueType() == VT) {
    BasePtr = DAG.getNode(ISD::ADD, DL, VT, BasePtr, SplatVal);
    Index = Index.getOperand(0);
    return true;
  }
  return false;
}

// Fold sext/zext of index into index type.
bool refineIndexType(SDValue &Index, ISD::MemIndexType &IndexType, EVT DataVT,
                     SelectionDAG &DAG) {
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();

  // It's always safe to look through zero extends.
  if (Index.getOpcode() == ISD::ZERO_EXTEND) {
    if (TLI.shouldRemoveExtendFromGSIndex(Index, DataVT)) {
      IndexType = ISD::UNSIGNED_SCALED;
      Index = Index.getOperand(0);
      return true;
    }
    if (ISD::isIndexTypeSigned(IndexType)) {
      IndexType = ISD::UNSIGNED_SCALED;
      return true;
    }
  }

  // It's only safe to look through sign extends when Index is signed.
  if (Index.getOpcode() == ISD::SIGN_EXTEND &&
      ISD::isIndexTypeSigned(IndexType) &&
      TLI.shouldRemoveExtendFromGSIndex(Index, DataVT)) {
    Index = Index.getOperand(0);
    return true;
  }

  return false;
}

SDValue DAGCombiner::visitVPSCATTER(SDNode *N) {
  VPScatterSDNode *MSC = cast<VPScatterSDNode>(N);
  SDValue Mask = MSC->getMask();
  SDValue Chain = MSC->getChain();
  SDValue Index = MSC->getIndex();
  SDValue Scale = MSC->getScale();
  SDValue StoreVal = MSC->getValue();
  SDValue BasePtr = MSC->getBasePtr();
  SDValue VL = MSC->getVectorLength();
  ISD::MemIndexType IndexType = MSC->getIndexType();
  SDLoc DL(N);

  // Zap scatters with a zero mask.
  if (ISD::isConstantSplatVectorAllZeros(Mask.getNode()))
    return Chain;

  if (refineUniformBase(BasePtr, Index, MSC->isIndexScaled(), DAG, DL)) {
    SDValue Ops[] = {Chain, StoreVal, BasePtr, Index, Scale, Mask, VL};
    return DAG.getScatterVP(DAG.getVTList(MVT::Other), MSC->getMemoryVT(),
                            DL, Ops, MSC->getMemOperand(), IndexType);
  }

  if (refineIndexType(Index, IndexType, StoreVal.getValueType(), DAG)) {
    SDValue Ops[] = {Chain, StoreVal, BasePtr, Index, Scale, Mask, VL};
    return DAG.getScatterVP(DAG.getVTList(MVT::Other), MSC->getMemoryVT(),
                            DL, Ops, MSC->getMemOperand(), IndexType);
  }

  return SDValue();
}

SDValue DAGCombiner::visitMSCATTER(SDNode *N) {
  MaskedScatterSDNode *MSC = cast<MaskedScatterSDNode>(N);
  SDValue Mask = MSC->getMask();
  SDValue Chain = MSC->getChain();
  SDValue Index = MSC->getIndex();
  SDValue Scale = MSC->getScale();
  SDValue StoreVal = MSC->getValue();
  SDValue BasePtr = MSC->getBasePtr();
  ISD::MemIndexType IndexType = MSC->getIndexType();
  SDLoc DL(N);

  // Zap scatters with a zero mask.
  if (ISD::isConstantSplatVectorAllZeros(Mask.getNode()))
    return Chain;

  if (refineUniformBase(BasePtr, Index, MSC->isIndexScaled(), DAG, DL)) {
    SDValue Ops[] = {Chain, StoreVal, Mask, BasePtr, Index, Scale};
    return DAG.getMaskedScatter(DAG.getVTList(MVT::Other), MSC->getMemoryVT(),
                                DL, Ops, MSC->getMemOperand(), IndexType,
                                MSC->isTruncatingStore());
  }

  if (refineIndexType(Index, IndexType, StoreVal.getValueType(), DAG)) {
    SDValue Ops[] = {Chain, StoreVal, Mask, BasePtr, Index, Scale};
    return DAG.getMaskedScatter(DAG.getVTList(MVT::Other), MSC->getMemoryVT(),
                                DL, Ops, MSC->getMemOperand(), IndexType,
                                MSC->isTruncatingStore());
  }

  return SDValue();
}

SDValue DAGCombiner::visitMSTORE(SDNode *N) {
  MaskedStoreSDNode *MST = cast<MaskedStoreSDNode>(N);
  SDValue Mask = MST->getMask();
  SDValue Chain = MST->getChain();
  SDValue Value = MST->getValue();
  SDValue Ptr = MST->getBasePtr();
  SDLoc DL(N);

  // Zap masked stores with a zero mask.
  if (ISD::isConstantSplatVectorAllZeros(Mask.getNode()))
    return Chain;

  // Remove a masked store if base pointers and masks are equal.
  if (MaskedStoreSDNode *MST1 = dyn_cast<MaskedStoreSDNode>(Chain)) {
    if (MST->isUnindexed() && MST->isSimple() && MST1->isUnindexed() &&
        MST1->isSimple() && MST1->getBasePtr() == Ptr &&
        !MST->getBasePtr().isUndef() &&
        ((Mask == MST1->getMask() && MST->getMemoryVT().getStoreSize() ==
                                         MST1->getMemoryVT().getStoreSize()) ||
         ISD::isConstantSplatVectorAllOnes(Mask.getNode())) &&
        TypeSize::isKnownLE(MST1->getMemoryVT().getStoreSize(),
                            MST->getMemoryVT().getStoreSize())) {
      CombineTo(MST1, MST1->getChain());
      if (N->getOpcode() != ISD::DELETED_NODE)
        AddToWorklist(N);
      return SDValue(N, 0);
    }
  }

  // If this is a masked load with an all ones mask, we can use a unmasked load.
  // FIXME: Can we do this for indexed, compressing, or truncating stores?
  if (ISD::isConstantSplatVectorAllOnes(Mask.getNode()) && MST->isUnindexed() &&
      !MST->isCompressingStore() && !MST->isTruncatingStore())
    return DAG.getStore(MST->getChain(), SDLoc(N), MST->getValue(),
                        MST->getBasePtr(), MST->getPointerInfo(),
                        MST->getOriginalAlign(),
                        MST->getMemOperand()->getFlags(), MST->getAAInfo());

  // Try transforming N to an indexed store.
  if (CombineToPreIndexedLoadStore(N) || CombineToPostIndexedLoadStore(N))
    return SDValue(N, 0);

  if (MST->isTruncatingStore() && MST->isUnindexed() &&
      Value.getValueType().isInteger() &&
      (!isa<ConstantSDNode>(Value) ||
       !cast<ConstantSDNode>(Value)->isOpaque())) {
    APInt TruncDemandedBits =
        APInt::getLowBitsSet(Value.getScalarValueSizeInBits(),
                             MST->getMemoryVT().getScalarSizeInBits());

    // See if we can simplify the operation with
    // SimplifyDemandedBits, which only works if the value has a single use.
    if (SimplifyDemandedBits(Value, TruncDemandedBits)) {
      // Re-visit the store if anything changed and the store hasn't been merged
      // with another node (N is deleted) SimplifyDemandedBits will add Value's
      // node back to the worklist if necessary, but we also need to re-visit
      // the Store node itself.
      if (N->getOpcode() != ISD::DELETED_NODE)
        AddToWorklist(N);
      return SDValue(N, 0);
    }
  }

  // If this is a TRUNC followed by a masked store, fold this into a masked
  // truncating store.  We can do this even if this is already a masked
  // truncstore.
  // TODO: Try combine to masked compress store if possiable.
  if ((Value.getOpcode() == ISD::TRUNCATE) && Value->hasOneUse() &&
      MST->isUnindexed() && !MST->isCompressingStore() &&
      TLI.canCombineTruncStore(Value.getOperand(0).getValueType(),
                               MST->getMemoryVT(), LegalOperations)) {
    auto Mask = TLI.promoteTargetBoolean(DAG, MST->getMask(),
                                         Value.getOperand(0).getValueType());
    return DAG.getMaskedStore(Chain, SDLoc(N), Value.getOperand(0), Ptr,
                              MST->getOffset(), Mask, MST->getMemoryVT(),
                              MST->getMemOperand(), MST->getAddressingMode(),
                              /*IsTruncating=*/true);
  }

  return SDValue();
}

SDValue DAGCombiner::visitVP_STRIDED_STORE(SDNode *N) {
  auto *SST = cast<VPStridedStoreSDNode>(N);
  EVT EltVT = SST->getValue().getValueType().getVectorElementType();
  // Combine strided stores with unit-stride to a regular VP store.
  if (auto *CStride = dyn_cast<ConstantSDNode>(SST->getStride());
      CStride && CStride->getZExtValue() == EltVT.getStoreSize()) {
    return DAG.getStoreVP(SST->getChain(), SDLoc(N), SST->getValue(),
                          SST->getBasePtr(), SST->getOffset(), SST->getMask(),
                          SST->getVectorLength(), SST->getMemoryVT(),
                          SST->getMemOperand(), SST->getAddressingMode(),
                          SST->isTruncatingStore(), SST->isCompressingStore());
  }
  return SDValue();
}

SDValue DAGCombiner::visitVECTOR_COMPRESS(SDNode *N) {
  SDLoc DL(N);
  SDValue Vec = N->getOperand(0);
  SDValue Mask = N->getOperand(1);
  SDValue Passthru = N->getOperand(2);
  EVT VecVT = Vec.getValueType();

  bool HasPassthru = !Passthru.isUndef();

  APInt SplatVal;
  if (ISD::isConstantSplatVector(Mask.getNode(), SplatVal))
    return TLI.isConstTrueVal(Mask) ? Vec : Passthru;

  if (Vec.isUndef() || Mask.isUndef())
    return Passthru;

  // No need for potentially expensive compress if the mask is constant.
  if (ISD::isBuildVectorOfConstantSDNodes(Mask.getNode())) {
    SmallVector<SDValue, 16> Ops;
    EVT ScalarVT = VecVT.getVectorElementType();
    unsigned NumSelected = 0;
    unsigned NumElmts = VecVT.getVectorNumElements();
    for (unsigned I = 0; I < NumElmts; ++I) {
      SDValue MaskI = Mask.getOperand(I);
      // We treat undef mask entries as "false".
      if (MaskI.isUndef())
        continue;

      if (TLI.isConstTrueVal(MaskI)) {
        SDValue VecI = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, ScalarVT, Vec,
                                   DAG.getVectorIdxConstant(I, DL));
        Ops.push_back(VecI);
        NumSelected++;
      }
    }
    for (unsigned Rest = NumSelected; Rest < NumElmts; ++Rest) {
      SDValue Val =
          HasPassthru
              ? DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, ScalarVT, Passthru,
                            DAG.getVectorIdxConstant(Rest, DL))
              : DAG.getUNDEF(ScalarVT);
      Ops.push_back(Val);
    }
    return DAG.getBuildVector(VecVT, DL, Ops);
  }

  return SDValue();
}

SDValue DAGCombiner::visitVPGATHER(SDNode *N) {
  VPGatherSDNode *MGT = cast<VPGatherSDNode>(N);
  SDValue Mask = MGT->getMask();
  SDValue Chain = MGT->getChain();
  SDValue Index = MGT->getIndex();
  SDValue Scale = MGT->getScale();
  SDValue BasePtr = MGT->getBasePtr();
  SDValue VL = MGT->getVectorLength();
  ISD::MemIndexType IndexType = MGT->getIndexType();
  SDLoc DL(N);

  if (refineUniformBase(BasePtr, Index, MGT->isIndexScaled(), DAG, DL)) {
    SDValue Ops[] = {Chain, BasePtr, Index, Scale, Mask, VL};
    return DAG.getGatherVP(
        DAG.getVTList(N->getValueType(0), MVT::Other), MGT->getMemoryVT(), DL,
        Ops, MGT->getMemOperand(), IndexType);
  }

  if (refineIndexType(Index, IndexType, N->getValueType(0), DAG)) {
    SDValue Ops[] = {Chain, BasePtr, Index, Scale, Mask, VL};
    return DAG.getGatherVP(
        DAG.getVTList(N->getValueType(0), MVT::Other), MGT->getMemoryVT(), DL,
        Ops, MGT->getMemOperand(), IndexType);
  }

  return SDValue();
}

SDValue DAGCombiner::visitMGATHER(SDNode *N) {
  MaskedGatherSDNode *MGT = cast<MaskedGatherSDNode>(N);
  SDValue Mask = MGT->getMask();
  SDValue Chain = MGT->getChain();
  SDValue Index = MGT->getIndex();
  SDValue Scale = MGT->getScale();
  SDValue PassThru = MGT->getPassThru();
  SDValue BasePtr = MGT->getBasePtr();
  ISD::MemIndexType IndexType = MGT->getIndexType();
  SDLoc DL(N);

  // Zap gathers with a zero mask.
  if (ISD::isConstantSplatVectorAllZeros(Mask.getNode()))
    return CombineTo(N, PassThru, MGT->getChain());

  if (refineUniformBase(BasePtr, Index, MGT->isIndexScaled(), DAG, DL)) {
    SDValue Ops[] = {Chain, PassThru, Mask, BasePtr, Index, Scale};
    return DAG.getMaskedGather(
        DAG.getVTList(N->getValueType(0), MVT::Other), MGT->getMemoryVT(), DL,
        Ops, MGT->getMemOperand(), IndexType, MGT->getExtensionType());
  }

  if (refineIndexType(Index, IndexType, N->getValueType(0), DAG)) {
    SDValue Ops[] = {Chain, PassThru, Mask, BasePtr, Index, Scale};
    return DAG.getMaskedGather(
        DAG.getVTList(N->getValueType(0), MVT::Other), MGT->getMemoryVT(), DL,
        Ops, MGT->getMemOperand(), IndexType, MGT->getExtensionType());
  }

  return SDValue();
}

SDValue DAGCombiner::visitMLOAD(SDNode *N) {
  MaskedLoadSDNode *MLD = cast<MaskedLoadSDNode>(N);
  SDValue Mask = MLD->getMask();
  SDLoc DL(N);

  // Zap masked loads with a zero mask.
  if (ISD::isConstantSplatVectorAllZeros(Mask.getNode()))
    return CombineTo(N, MLD->getPassThru(), MLD->getChain());

  // If this is a masked load with an all ones mask, we can use a unmasked load.
  // FIXME: Can we do this for indexed, expanding, or extending loads?
  if (ISD::isConstantSplatVectorAllOnes(Mask.getNode()) && MLD->isUnindexed() &&
      !MLD->isExpandingLoad() && MLD->getExtensionType() == ISD::NON_EXTLOAD) {
    SDValue NewLd = DAG.getLoad(
        N->getValueType(0), SDLoc(N), MLD->getChain(), MLD->getBasePtr(),
        MLD->getPointerInfo(), MLD->getOriginalAlign(),
        MLD->getMemOperand()->getFlags(), MLD->getAAInfo(), MLD->getRanges());
    return CombineTo(N, NewLd, NewLd.getValue(1));
  }

  // Try transforming N to an indexed load.
  if (CombineToPreIndexedLoadStore(N) || CombineToPostIndexedLoadStore(N))
    return SDValue(N, 0);

  return SDValue();
}

SDValue DAGCombiner::visitMHISTOGRAM(SDNode *N) {
  MaskedHistogramSDNode *HG = cast<MaskedHistogramSDNode>(N);
  SDValue Chain = HG->getChain();
  SDValue Inc = HG->getInc();
  SDValue Mask = HG->getMask();
  SDValue BasePtr = HG->getBasePtr();
  SDValue Index = HG->getIndex();
  SDLoc DL(HG);

  EVT MemVT = HG->getMemoryVT();
  MachineMemOperand *MMO = HG->getMemOperand();
  ISD::MemIndexType IndexType = HG->getIndexType();

  if (ISD::isConstantSplatVectorAllZeros(Mask.getNode()))
    return Chain;

  SDValue Ops[] = {Chain,          Inc,           Mask, BasePtr, Index,
                   HG->getScale(), HG->getIntID()};
  if (refineUniformBase(BasePtr, Index, HG->isIndexScaled(), DAG, DL))
    return DAG.getMaskedHistogram(DAG.getVTList(MVT::Other), MemVT, DL, Ops,
                                  MMO, IndexType);

  EVT DataVT = Index.getValueType();
  if (refineIndexType(Index, IndexType, DataVT, DAG))
    return DAG.getMaskedHistogram(DAG.getVTList(MVT::Other), MemVT, DL, Ops,
                                  MMO, IndexType);
  return SDValue();
}

SDValue DAGCombiner::visitVP_STRIDED_LOAD(SDNode *N) {
  auto *SLD = cast<VPStridedLoadSDNode>(N);
  EVT EltVT = SLD->getValueType(0).getVectorElementType();
  // Combine strided loads with unit-stride to a regular VP load.
  if (auto *CStride = dyn_cast<ConstantSDNode>(SLD->getStride());
      CStride && CStride->getZExtValue() == EltVT.getStoreSize()) {
    SDValue NewLd = DAG.getLoadVP(
        SLD->getAddressingMode(), SLD->getExtensionType(), SLD->getValueType(0),
        SDLoc(N), SLD->getChain(), SLD->getBasePtr(), SLD->getOffset(),
        SLD->getMask(), SLD->getVectorLength(), SLD->getMemoryVT(),
        SLD->getMemOperand(), SLD->isExpandingLoad());
    return CombineTo(N, NewLd, NewLd.getValue(1));
  }
  return SDValue();
}

/// A vector select of 2 constant vectors can be simplified to math/logic to
/// avoid a variable select instruction and possibly avoid constant loads.
SDValue DAGCombiner::foldVSelectOfConstants(SDNode *N) {
  SDValue Cond = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue N2 = N->getOperand(2);
  EVT VT = N->getValueType(0);
  if (!Cond.hasOneUse() || Cond.getScalarValueSizeInBits() != 1 ||
      !shouldConvertSelectOfConstantsToMath(Cond, VT, TLI) ||
      !ISD::isBuildVectorOfConstantSDNodes(N1.getNode()) ||
      !ISD::isBuildVectorOfConstantSDNodes(N2.getNode()))
    return SDValue();

  // Check if we can use the condition value to increment/decrement a single
  // constant value. This simplifies a select to an add and removes a constant
  // load/materialization from the general case.
  bool AllAddOne = true;
  bool AllSubOne = true;
  unsigned Elts = VT.getVectorNumElements();
  for (unsigned i = 0; i != Elts; ++i) {
    SDValue N1Elt = N1.getOperand(i);
    SDValue N2Elt = N2.getOperand(i);
    if (N1Elt.isUndef() || N2Elt.isUndef())
      continue;
    if (N1Elt.getValueType() != N2Elt.getValueType()) {
      AllAddOne = false;
      AllSubOne = false;
      break;
    }

    const APInt &C1 = N1Elt->getAsAPIntVal();
    const APInt &C2 = N2Elt->getAsAPIntVal();
    if (C1 != C2 + 1)
      AllAddOne = false;
    if (C1 != C2 - 1)
      AllSubOne = false;
  }

  // Further simplifications for the extra-special cases where the constants are
  // all 0 or all -1 should be implemented as folds of these patterns.
  SDLoc DL(N);
  if (AllAddOne || AllSubOne) {
    // vselect <N x i1> Cond, C+1, C --> add (zext Cond), C
    // vselect <N x i1> Cond, C-1, C --> add (sext Cond), C
    auto ExtendOpcode = AllAddOne ? ISD::ZERO_EXTEND : ISD::SIGN_EXTEND;
    SDValue ExtendedCond = DAG.getNode(ExtendOpcode, DL, VT, Cond);
    return DAG.getNode(ISD::ADD, DL, VT, ExtendedCond, N2);
  }

  // select Cond, Pow2C, 0 --> (zext Cond) << log2(Pow2C)
  APInt Pow2C;
  if (ISD::isConstantSplatVector(N1.getNode(), Pow2C) && Pow2C.isPowerOf2() &&
      isNullOrNullSplat(N2)) {
    SDValue ZextCond = DAG.getZExtOrTrunc(Cond, DL, VT);
    SDValue ShAmtC = DAG.getConstant(Pow2C.exactLogBase2(), DL, VT);
    return DAG.getNode(ISD::SHL, DL, VT, ZextCond, ShAmtC);
  }

  if (SDValue V = foldSelectOfConstantsUsingSra(N, DL, DAG))
    return V;

  // The general case for select-of-constants:
  // vselect <N x i1> Cond, C1, C2 --> xor (and (sext Cond), (C1^C2)), C2
  // ...but that only makes sense if a vselect is slower than 2 logic ops, so
  // leave that to a machine-specific pass.
  return SDValue();
}

SDValue DAGCombiner::visitVP_SELECT(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue N2 = N->getOperand(2);
  SDLoc DL(N);

  if (SDValue V = DAG.simplifySelect(N0, N1, N2))
    return V;

  if (SDValue V = foldBoolSelectToLogic<VPMatchContext>(N, DL, DAG))
    return V;

  return SDValue();
}

SDValue DAGCombiner::visitVSELECT(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue N2 = N->getOperand(2);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  if (SDValue V = DAG.simplifySelect(N0, N1, N2))
    return V;

  if (SDValue V = foldBoolSelectToLogic<EmptyMatchContext>(N, DL, DAG))
    return V;

  // vselect (not Cond), N1, N2 -> vselect Cond, N2, N1
  if (SDValue F = extractBooleanFlip(N0, DAG, TLI, false))
    return DAG.getSelect(DL, VT, F, N2, N1);

  // select (sext m), (add X, C), X --> (add X, (and C, (sext m))))
  if (N1.getOpcode() == ISD::ADD && N1.getOperand(0) == N2 && N1->hasOneUse() &&
      DAG.isConstantIntBuildVectorOrConstantInt(N1.getOperand(1)) &&
      N0.getScalarValueSizeInBits() == N1.getScalarValueSizeInBits() &&
      TLI.getBooleanContents(N0.getValueType()) ==
          TargetLowering::ZeroOrNegativeOneBooleanContent) {
    return DAG.getNode(
        ISD::ADD, DL, N1.getValueType(), N2,
        DAG.getNode(ISD::AND, DL, N0.getValueType(), N1.getOperand(1), N0));
  }

  // Canonicalize integer abs.
  // vselect (setg[te] X,  0),  X, -X ->
  // vselect (setgt    X, -1),  X, -X ->
  // vselect (setl[te] X,  0), -X,  X ->
  // Y = sra (X, size(X)-1); xor (add (X, Y), Y)
  if (N0.getOpcode() == ISD::SETCC) {
    SDValue LHS = N0.getOperand(0), RHS = N0.getOperand(1);
    ISD::CondCode CC = cast<CondCodeSDNode>(N0.getOperand(2))->get();
    bool isAbs = false;
    bool RHSIsAllZeros = ISD::isBuildVectorAllZeros(RHS.getNode());

    if (((RHSIsAllZeros && (CC == ISD::SETGT || CC == ISD::SETGE)) ||
         (ISD::isBuildVectorAllOnes(RHS.getNode()) && CC == ISD::SETGT)) &&
        N1 == LHS && N2.getOpcode() == ISD::SUB && N1 == N2.getOperand(1))
      isAbs = ISD::isBuildVectorAllZeros(N2.getOperand(0).getNode());
    else if ((RHSIsAllZeros && (CC == ISD::SETLT || CC == ISD::SETLE)) &&
             N2 == LHS && N1.getOpcode() == ISD::SUB && N2 == N1.getOperand(1))
      isAbs = ISD::isBuildVectorAllZeros(N1.getOperand(0).getNode());

    if (isAbs) {
      if (TLI.isOperationLegalOrCustom(ISD::ABS, VT))
        return DAG.getNode(ISD::ABS, DL, VT, LHS);

      SDValue Shift = DAG.getNode(
          ISD::SRA, DL, VT, LHS,
          DAG.getShiftAmountConstant(VT.getScalarSizeInBits() - 1, VT, DL));
      SDValue Add = DAG.getNode(ISD::ADD, DL, VT, LHS, Shift);
      AddToWorklist(Shift.getNode());
      AddToWorklist(Add.getNode());
      return DAG.getNode(ISD::XOR, DL, VT, Add, Shift);
    }

    // vselect x, y (fcmp lt x, y) -> fminnum x, y
    // vselect x, y (fcmp gt x, y) -> fmaxnum x, y
    //
    // This is OK if we don't care about what happens if either operand is a
    // NaN.
    //
    if (N0.hasOneUse() &&
        isLegalToCombineMinNumMaxNum(DAG, LHS, RHS, N->getFlags(), TLI)) {
      if (SDValue FMinMax = combineMinNumMaxNum(DL, VT, LHS, RHS, N1, N2, CC))
        return FMinMax;
    }

    if (SDValue S = PerformMinMaxFpToSatCombine(LHS, RHS, N1, N2, CC, DAG))
      return S;
    if (SDValue S = PerformUMinFpToSatCombine(LHS, RHS, N1, N2, CC, DAG))
      return S;

    // If this select has a condition (setcc) with narrower operands than the
    // select, try to widen the compare to match the select width.
    // TODO: This should be extended to handle any constant.
    // TODO: This could be extended to handle non-loading patterns, but that
    //       requires thorough testing to avoid regressions.
    if (isNullOrNullSplat(RHS)) {
      EVT NarrowVT = LHS.getValueType();
      EVT WideVT = N1.getValueType().changeVectorElementTypeToInteger();
      EVT SetCCVT = getSetCCResultType(LHS.getValueType());
      unsigned SetCCWidth = SetCCVT.getScalarSizeInBits();
      unsigned WideWidth = WideVT.getScalarSizeInBits();
      bool IsSigned = isSignedIntSetCC(CC);
      auto LoadExtOpcode = IsSigned ? ISD::SEXTLOAD : ISD::ZEXTLOAD;
      if (LHS.getOpcode() == ISD::LOAD && LHS.hasOneUse() &&
          SetCCWidth != 1 && SetCCWidth < WideWidth &&
          TLI.isLoadExtLegalOrCustom(LoadExtOpcode, WideVT, NarrowVT) &&
          TLI.isOperationLegalOrCustom(ISD::SETCC, WideVT)) {
        // Both compare operands can be widened for free. The LHS can use an
        // extended load, and the RHS is a constant:
        //   vselect (ext (setcc load(X), C)), N1, N2 -->
        //   vselect (setcc extload(X), C'), N1, N2
        auto ExtOpcode = IsSigned ? ISD::SIGN_EXTEND : ISD::ZERO_EXTEND;
        SDValue WideLHS = DAG.getNode(ExtOpcode, DL, WideVT, LHS);
        SDValue WideRHS = DAG.getNode(ExtOpcode, DL, WideVT, RHS);
        EVT WideSetCCVT = getSetCCResultType(WideVT);
        SDValue WideSetCC = DAG.getSetCC(DL, WideSetCCVT, WideLHS, WideRHS, CC);
        return DAG.getSelect(DL, N1.getValueType(), WideSetCC, N1, N2);
      }
    }

    if (SDValue ABD = foldSelectToABD(LHS, RHS, N1, N2, CC, DL))
      return ABD;

    // Match VSELECTs into add with unsigned saturation.
    if (hasOperation(ISD::UADDSAT, VT)) {
      // Check if one of the arms of the VSELECT is vector with all bits set.
      // If it's on the left side invert the predicate to simplify logic below.
      SDValue Other;
      ISD::CondCode SatCC = CC;
      if (ISD::isConstantSplatVectorAllOnes(N1.getNode())) {
        Other = N2;
        SatCC = ISD::getSetCCInverse(SatCC, VT.getScalarType());
      } else if (ISD::isConstantSplatVectorAllOnes(N2.getNode())) {
        Other = N1;
      }

      if (Other && Other.getOpcode() == ISD::ADD) {
        SDValue CondLHS = LHS, CondRHS = RHS;
        SDValue OpLHS = Other.getOperand(0), OpRHS = Other.getOperand(1);

        // Canonicalize condition operands.
        if (SatCC == ISD::SETUGE) {
          std::swap(CondLHS, CondRHS);
          SatCC = ISD::SETULE;
        }

        // We can test against either of the addition operands.
        // x <= x+y ? x+y : ~0 --> uaddsat x, y
        // x+y >= x ? x+y : ~0 --> uaddsat x, y
        if (SatCC == ISD::SETULE && Other == CondRHS &&
            (OpLHS == CondLHS || OpRHS == CondLHS))
          return DAG.getNode(ISD::UADDSAT, DL, VT, OpLHS, OpRHS);

        if (OpRHS.getOpcode() == CondRHS.getOpcode() &&
            (OpRHS.getOpcode() == ISD::BUILD_VECTOR ||
             OpRHS.getOpcode() == ISD::SPLAT_VECTOR) &&
            CondLHS == OpLHS) {
          // If the RHS is a constant we have to reverse the const
          // canonicalization.
          // x >= ~C ? x+C : ~0 --> uaddsat x, C
          auto MatchUADDSAT = [](ConstantSDNode *Op, ConstantSDNode *Cond) {
            return Cond->getAPIntValue() == ~Op->getAPIntValue();
          };
          if (SatCC == ISD::SETULE &&
              ISD::matchBinaryPredicate(OpRHS, CondRHS, MatchUADDSAT))
            return DAG.getNode(ISD::UADDSAT, DL, VT, OpLHS, OpRHS);
        }
      }
    }

    // Match VSELECTs into sub with unsigned saturation.
    if (hasOperation(ISD::USUBSAT, VT)) {
      // Check if one of the arms of the VSELECT is a zero vector. If it's on
      // the left side invert the predicate to simplify logic below.
      SDValue Other;
      ISD::CondCode SatCC = CC;
      if (ISD::isConstantSplatVectorAllZeros(N1.getNode())) {
        Other = N2;
        SatCC = ISD::getSetCCInverse(SatCC, VT.getScalarType());
      } else if (ISD::isConstantSplatVectorAllZeros(N2.getNode())) {
        Other = N1;
      }

      // zext(x) >= y ? trunc(zext(x) - y) : 0
      // --> usubsat(trunc(zext(x)),trunc(umin(y,SatLimit)))
      // zext(x) >  y ? trunc(zext(x) - y) : 0
      // --> usubsat(trunc(zext(x)),trunc(umin(y,SatLimit)))
      if (Other && Other.getOpcode() == ISD::TRUNCATE &&
          Other.getOperand(0).getOpcode() == ISD::SUB &&
          (SatCC == ISD::SETUGE || SatCC == ISD::SETUGT)) {
        SDValue OpLHS = Other.getOperand(0).getOperand(0);
        SDValue OpRHS = Other.getOperand(0).getOperand(1);
        if (LHS == OpLHS && RHS == OpRHS && LHS.getOpcode() == ISD::ZERO_EXTEND)
          if (SDValue R = getTruncatedUSUBSAT(VT, LHS.getValueType(), LHS, RHS,
                                              DAG, DL))
            return R;
      }

      if (Other && Other.getNumOperands() == 2) {
        SDValue CondRHS = RHS;
        SDValue OpLHS = Other.getOperand(0), OpRHS = Other.getOperand(1);

        if (OpLHS == LHS) {
          // Look for a general sub with unsigned saturation first.
          // x >= y ? x-y : 0 --> usubsat x, y
          // x >  y ? x-y : 0 --> usubsat x, y
          if ((SatCC == ISD::SETUGE || SatCC == ISD::SETUGT) &&
              Other.getOpcode() == ISD::SUB && OpRHS == CondRHS)
            return DAG.getNode(ISD::USUBSAT, DL, VT, OpLHS, OpRHS);

          if (OpRHS.getOpcode() == ISD::BUILD_VECTOR ||
              OpRHS.getOpcode() == ISD::SPLAT_VECTOR) {
            if (CondRHS.getOpcode() == ISD::BUILD_VECTOR ||
                CondRHS.getOpcode() == ISD::SPLAT_VECTOR) {
              // If the RHS is a constant we have to reverse the const
              // canonicalization.
              // x > C-1 ? x+-C : 0 --> usubsat x, C
              auto MatchUSUBSAT = [](ConstantSDNode *Op, ConstantSDNode *Cond) {
                return (!Op && !Cond) ||
                       (Op && Cond &&
                        Cond->getAPIntValue() == (-Op->getAPIntValue() - 1));
              };
              if (SatCC == ISD::SETUGT && Other.getOpcode() == ISD::ADD &&
                  ISD::matchBinaryPredicate(OpRHS, CondRHS, MatchUSUBSAT,
                                            /*AllowUndefs*/ true)) {
                OpRHS = DAG.getNegative(OpRHS, DL, VT);
                return DAG.getNode(ISD::USUBSAT, DL, VT, OpLHS, OpRHS);
              }

              // Another special case: If C was a sign bit, the sub has been
              // canonicalized into a xor.
              // FIXME: Would it be better to use computeKnownBits to
              // determine whether it's safe to decanonicalize the xor?
              // x s< 0 ? x^C : 0 --> usubsat x, C
              APInt SplatValue;
              if (SatCC == ISD::SETLT && Other.getOpcode() == ISD::XOR &&
                  ISD::isConstantSplatVector(OpRHS.getNode(), SplatValue) &&
                  ISD::isConstantSplatVectorAllZeros(CondRHS.getNode()) &&
                  SplatValue.isSignMask()) {
                // Note that we have to rebuild the RHS constant here to
                // ensure we don't rely on particular values of undef lanes.
                OpRHS = DAG.getConstant(SplatValue, DL, VT);
                return DAG.getNode(ISD::USUBSAT, DL, VT, OpLHS, OpRHS);
              }
            }
          }
        }
      }
    }
  }

  if (SimplifySelectOps(N, N1, N2))
    return SDValue(N, 0);  // Don't revisit N.

  // Fold (vselect all_ones, N1, N2) -> N1
  if (ISD::isConstantSplatVectorAllOnes(N0.getNode()))
    return N1;
  // Fold (vselect all_zeros, N1, N2) -> N2
  if (ISD::isConstantSplatVectorAllZeros(N0.getNode()))
    return N2;

  // The ConvertSelectToConcatVector function is assuming both the above
  // checks for (vselect (build_vector all{ones,zeros) ...) have been made
  // and addressed.
  if (N1.getOpcode() == ISD::CONCAT_VECTORS &&
      N2.getOpcode() == ISD::CONCAT_VECTORS &&
      ISD::isBuildVectorOfConstantSDNodes(N0.getNode())) {
    if (SDValue CV = ConvertSelectToConcatVector(N, DAG))
      return CV;
  }

  if (SDValue V = foldVSelectOfConstants(N))
    return V;

  if (hasOperation(ISD::SRA, VT))
    if (SDValue V = foldVSelectToSignBitSplatMask(N, DAG))
      return V;

  if (SimplifyDemandedVectorElts(SDValue(N, 0)))
    return SDValue(N, 0);

  return SDValue();
}

SDValue DAGCombiner::visitSELECT_CC(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue N2 = N->getOperand(2);
  SDValue N3 = N->getOperand(3);
  SDValue N4 = N->getOperand(4);
  ISD::CondCode CC = cast<CondCodeSDNode>(N4)->get();
  SDLoc DL(N);

  // fold select_cc lhs, rhs, x, x, cc -> x
  if (N2 == N3)
    return N2;

  // select_cc bool, 0, x, y, seteq -> select bool, y, x
  if (CC == ISD::SETEQ && !LegalTypes && N0.getValueType() == MVT::i1 &&
      isNullConstant(N1))
    return DAG.getSelect(DL, N2.getValueType(), N0, N3, N2);

  // Determine if the condition we're dealing with is constant
  if (SDValue SCC = SimplifySetCC(getSetCCResultType(N0.getValueType()), N0, N1,
                                  CC, DL, false)) {
    AddToWorklist(SCC.getNode());

    // cond always true -> true val
    // cond always false -> false val
    if (auto *SCCC = dyn_cast<ConstantSDNode>(SCC.getNode()))
      return SCCC->isZero() ? N3 : N2;

    // When the condition is UNDEF, just return the first operand. This is
    // coherent the DAG creation, no setcc node is created in this case
    if (SCC->isUndef())
      return N2;

    // Fold to a simpler select_cc
    if (SCC.getOpcode() == ISD::SETCC) {
      SDValue SelectOp =
          DAG.getNode(ISD::SELECT_CC, DL, N2.getValueType(), SCC.getOperand(0),
                      SCC.getOperand(1), N2, N3, SCC.getOperand(2));
      SelectOp->setFlags(SCC->getFlags());
      return SelectOp;
    }
  }

  // If we can fold this based on the true/false value, do so.
  if (SimplifySelectOps(N, N2, N3))
    return SDValue(N, 0); // Don't revisit N.

  // fold select_cc into other things, such as min/max/abs
  return SimplifySelectCC(DL, N0, N1, N2, N3, CC);
}

SDValue DAGCombiner::visitSETCC(SDNode *N) {
  // setcc is very commonly used as an argument to brcond. This pattern
  // also lend itself to numerous combines and, as a result, it is desired
  // we keep the argument to a brcond as a setcc as much as possible.
  bool PreferSetCC =
      N->hasOneUse() && N->use_begin()->getOpcode() == ISD::BRCOND;

  ISD::CondCode Cond = cast<CondCodeSDNode>(N->getOperand(2))->get();
  EVT VT = N->getValueType(0);
  SDValue N0 = N->getOperand(0), N1 = N->getOperand(1);
  SDLoc DL(N);

  if (SDValue Combined = SimplifySetCC(VT, N0, N1, Cond, DL, !PreferSetCC)) {
    // If we prefer to have a setcc, and we don't, we'll try our best to
    // recreate one using rebuildSetCC.
    if (PreferSetCC && Combined.getOpcode() != ISD::SETCC) {
      SDValue NewSetCC = rebuildSetCC(Combined);

      // We don't have anything interesting to combine to.
      if (NewSetCC.getNode() == N)
        return SDValue();

      if (NewSetCC)
        return NewSetCC;
    }
    return Combined;
  }

  // Optimize
  //    1) (icmp eq/ne (and X, C0), (shift X, C1))
  // or
  //    2) (icmp eq/ne X, (rotate X, C1))
  // If C0 is a mask or shifted mask and the shift amt (C1) isolates the
  // remaining bits (i.e something like `(x64 & UINT32_MAX) == (x64 >> 32)`)
  // Then:
  // If C1 is a power of 2, then the rotate and shift+and versions are
  // equivilent, so we can interchange them depending on target preference.
  // Otherwise, if we have the shift+and version we can interchange srl/shl
  // which inturn affects the constant C0. We can use this to get better
  // constants again determined by target preference.
  if (Cond == ISD::SETNE || Cond == ISD::SETEQ) {
    auto IsAndWithShift = [](SDValue A, SDValue B) {
      return A.getOpcode() == ISD::AND &&
             (B.getOpcode() == ISD::SRL || B.getOpcode() == ISD::SHL) &&
             A.getOperand(0) == B.getOperand(0);
    };
    auto IsRotateWithOp = [](SDValue A, SDValue B) {
      return (B.getOpcode() == ISD::ROTL || B.getOpcode() == ISD::ROTR) &&
             B.getOperand(0) == A;
    };
    SDValue AndOrOp = SDValue(), ShiftOrRotate = SDValue();
    bool IsRotate = false;

    // Find either shift+and or rotate pattern.
    if (IsAndWithShift(N0, N1)) {
      AndOrOp = N0;
      ShiftOrRotate = N1;
    } else if (IsAndWithShift(N1, N0)) {
      AndOrOp = N1;
      ShiftOrRotate = N0;
    } else if (IsRotateWithOp(N0, N1)) {
      IsRotate = true;
      AndOrOp = N0;
      ShiftOrRotate = N1;
    } else if (IsRotateWithOp(N1, N0)) {
      IsRotate = true;
      AndOrOp = N1;
      ShiftOrRotate = N0;
    }

    if (AndOrOp && ShiftOrRotate && ShiftOrRotate.hasOneUse() &&
        (IsRotate || AndOrOp.hasOneUse())) {
      EVT OpVT = N0.getValueType();
      // Get constant shift/rotate amount and possibly mask (if its shift+and
      // variant).
      auto GetAPIntValue = [](SDValue Op) -> std::optional<APInt> {
        ConstantSDNode *CNode = isConstOrConstSplat(Op, /*AllowUndefs*/ false,
                                                    /*AllowTrunc*/ false);
        if (CNode == nullptr)
          return std::nullopt;
        return CNode->getAPIntValue();
      };
      std::optional<APInt> AndCMask =
          IsRotate ? std::nullopt : GetAPIntValue(AndOrOp.getOperand(1));
      std::optional<APInt> ShiftCAmt =
          GetAPIntValue(ShiftOrRotate.getOperand(1));
      unsigned NumBits = OpVT.getScalarSizeInBits();

      // We found constants.
      if (ShiftCAmt && (IsRotate || AndCMask) && ShiftCAmt->ult(NumBits)) {
        unsigned ShiftOpc = ShiftOrRotate.getOpcode();
        // Check that the constants meet the constraints.
        bool CanTransform = IsRotate;
        if (!CanTransform) {
          // Check that mask and shift compliment eachother
          CanTransform = *ShiftCAmt == (~*AndCMask).popcount();
          // Check that we are comparing all bits
          CanTransform &= (*ShiftCAmt + AndCMask->popcount()) == NumBits;
          // Check that the and mask is correct for the shift
          CanTransform &=
              ShiftOpc == ISD::SHL ? (~*AndCMask).isMask() : AndCMask->isMask();
        }

        // See if target prefers another shift/rotate opcode.
        unsigned NewShiftOpc = TLI.preferedOpcodeForCmpEqPiecesOfOperand(
            OpVT, ShiftOpc, ShiftCAmt->isPowerOf2(), *ShiftCAmt, AndCMask);
        // Transform is valid and we have a new preference.
        if (CanTransform && NewShiftOpc != ShiftOpc) {
          SDValue NewShiftOrRotate =
              DAG.getNode(NewShiftOpc, DL, OpVT, ShiftOrRotate.getOperand(0),
                          ShiftOrRotate.getOperand(1));
          SDValue NewAndOrOp = SDValue();

          if (NewShiftOpc == ISD::SHL || NewShiftOpc == ISD::SRL) {
            APInt NewMask =
                NewShiftOpc == ISD::SHL
                    ? APInt::getHighBitsSet(NumBits,
                                            NumBits - ShiftCAmt->getZExtValue())
                    : APInt::getLowBitsSet(NumBits,
                                           NumBits - ShiftCAmt->getZExtValue());
            NewAndOrOp =
                DAG.getNode(ISD::AND, DL, OpVT, ShiftOrRotate.getOperand(0),
                            DAG.getConstant(NewMask, DL, OpVT));
          } else {
            NewAndOrOp = ShiftOrRotate.getOperand(0);
          }

          return DAG.getSetCC(DL, VT, NewAndOrOp, NewShiftOrRotate, Cond);
        }
      }
    }
  }
  return SDValue();
}

SDValue DAGCombiner::visitSETCCCARRY(SDNode *N) {
  SDValue LHS = N->getOperand(0);
  SDValue RHS = N->getOperand(1);
  SDValue Carry = N->getOperand(2);
  SDValue Cond = N->getOperand(3);

  // If Carry is false, fold to a regular SETCC.
  if (isNullConstant(Carry))
    return DAG.getNode(ISD::SETCC, SDLoc(N), N->getVTList(), LHS, RHS, Cond);

  return SDValue();
}

/// Check if N satisfies:
///   N is used once.
///   N is a Load.
///   The load is compatible with ExtOpcode. It means
///     If load has explicit zero/sign extension, ExpOpcode must have the same
///     extension.
///     Otherwise returns true.
static bool isCompatibleLoad(SDValue N, unsigned ExtOpcode) {
  if (!N.hasOneUse())
    return false;

  if (!isa<LoadSDNode>(N))
    return false;

  LoadSDNode *Load = cast<LoadSDNode>(N);
  ISD::LoadExtType LoadExt = Load->getExtensionType();
  if (LoadExt == ISD::NON_EXTLOAD || LoadExt == ISD::EXTLOAD)
    return true;

  // Now LoadExt is either SEXTLOAD or ZEXTLOAD, ExtOpcode must have the same
  // extension.
  if ((LoadExt == ISD::SEXTLOAD && ExtOpcode != ISD::SIGN_EXTEND) ||
      (LoadExt == ISD::ZEXTLOAD && ExtOpcode != ISD::ZERO_EXTEND))
    return false;

  return true;
}

/// Fold
///   (sext (select c, load x, load y)) -> (select c, sextload x, sextload y)
///   (zext (select c, load x, load y)) -> (select c, zextload x, zextload y)
///   (aext (select c, load x, load y)) -> (select c, extload x, extload y)
/// This function is called by the DAGCombiner when visiting sext/zext/aext
/// dag nodes (see for example method DAGCombiner::visitSIGN_EXTEND).
static SDValue tryToFoldExtendSelectLoad(SDNode *N, const TargetLowering &TLI,
                                         SelectionDAG &DAG, const SDLoc &DL,
                                         CombineLevel Level) {
  unsigned Opcode = N->getOpcode();
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  assert((Opcode == ISD::SIGN_EXTEND || Opcode == ISD::ZERO_EXTEND ||
          Opcode == ISD::ANY_EXTEND) &&
         "Expected EXTEND dag node in input!");

  if (!(N0->getOpcode() == ISD::SELECT || N0->getOpcode() == ISD::VSELECT) ||
      !N0.hasOneUse())
    return SDValue();

  SDValue Op1 = N0->getOperand(1);
  SDValue Op2 = N0->getOperand(2);
  if (!isCompatibleLoad(Op1, Opcode) || !isCompatibleLoad(Op2, Opcode))
    return SDValue();

  auto ExtLoadOpcode = ISD::EXTLOAD;
  if (Opcode == ISD::SIGN_EXTEND)
    ExtLoadOpcode = ISD::SEXTLOAD;
  else if (Opcode == ISD::ZERO_EXTEND)
    ExtLoadOpcode = ISD::ZEXTLOAD;

  // Illegal VSELECT may ISel fail if happen after legalization (DAG
  // Combine2), so we should conservatively check the OperationAction.
  LoadSDNode *Load1 = cast<LoadSDNode>(Op1);
  LoadSDNode *Load2 = cast<LoadSDNode>(Op2);
  if (!TLI.isLoadExtLegal(ExtLoadOpcode, VT, Load1->getMemoryVT()) ||
      !TLI.isLoadExtLegal(ExtLoadOpcode, VT, Load2->getMemoryVT()) ||
      (N0->getOpcode() == ISD::VSELECT && Level >= AfterLegalizeTypes &&
       TLI.getOperationAction(ISD::VSELECT, VT) != TargetLowering::Legal))
    return SDValue();

  SDValue Ext1 = DAG.getNode(Opcode, DL, VT, Op1);
  SDValue Ext2 = DAG.getNode(Opcode, DL, VT, Op2);
  return DAG.getSelect(DL, VT, N0->getOperand(0), Ext1, Ext2);
}

/// Try to fold a sext/zext/aext dag node into a ConstantSDNode or
/// a build_vector of constants.
/// This function is called by the DAGCombiner when visiting sext/zext/aext
/// dag nodes (see for example method DAGCombiner::visitSIGN_EXTEND).
/// Vector extends are not folded if operations are legal; this is to
/// avoid introducing illegal build_vector dag nodes.
static SDValue tryToFoldExtendOfConstant(SDNode *N, const SDLoc &DL,
                                         const TargetLowering &TLI,
                                         SelectionDAG &DAG, bool LegalTypes) {
  unsigned Opcode = N->getOpcode();
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);

  assert((ISD::isExtOpcode(Opcode) || ISD::isExtVecInRegOpcode(Opcode)) &&
         "Expected EXTEND dag node in input!");

  // fold (sext c1) -> c1
  // fold (zext c1) -> c1
  // fold (aext c1) -> c1
  if (isa<ConstantSDNode>(N0))
    return DAG.getNode(Opcode, DL, VT, N0);

  // fold (sext (select cond, c1, c2)) -> (select cond, sext c1, sext c2)
  // fold (zext (select cond, c1, c2)) -> (select cond, zext c1, zext c2)
  // fold (aext (select cond, c1, c2)) -> (select cond, sext c1, sext c2)
  if (N0->getOpcode() == ISD::SELECT) {
    SDValue Op1 = N0->getOperand(1);
    SDValue Op2 = N0->getOperand(2);
    if (isa<ConstantSDNode>(Op1) && isa<ConstantSDNode>(Op2) &&
        (Opcode != ISD::ZERO_EXTEND || !TLI.isZExtFree(N0.getValueType(), VT))) {
      // For any_extend, choose sign extension of the constants to allow a
      // possible further transform to sign_extend_inreg.i.e.
      //
      // t1: i8 = select t0, Constant:i8<-1>, Constant:i8<0>
      // t2: i64 = any_extend t1
      // -->
      // t3: i64 = select t0, Constant:i64<-1>, Constant:i64<0>
      // -->
      // t4: i64 = sign_extend_inreg t3
      unsigned FoldOpc = Opcode;
      if (FoldOpc == ISD::ANY_EXTEND)
        FoldOpc = ISD::SIGN_EXTEND;
      return DAG.getSelect(DL, VT, N0->getOperand(0),
                           DAG.getNode(FoldOpc, DL, VT, Op1),
                           DAG.getNode(FoldOpc, DL, VT, Op2));
    }
  }

  // fold (sext (build_vector AllConstants) -> (build_vector AllConstants)
  // fold (zext (build_vector AllConstants) -> (build_vector AllConstants)
  // fold (aext (build_vector AllConstants) -> (build_vector AllConstants)
  EVT SVT = VT.getScalarType();
  if (!(VT.isVector() && (!LegalTypes || TLI.isTypeLegal(SVT)) &&
      ISD::isBuildVectorOfConstantSDNodes(N0.getNode())))
    return SDValue();

  // We can fold this node into a build_vector.
  unsigned VTBits = SVT.getSizeInBits();
  unsigned EVTBits = N0->getValueType(0).getScalarSizeInBits();
  SmallVector<SDValue, 8> Elts;
  unsigned NumElts = VT.getVectorNumElements();

  for (unsigned i = 0; i != NumElts; ++i) {
    SDValue Op = N0.getOperand(i);
    if (Op.isUndef()) {
      if (Opcode == ISD::ANY_EXTEND || Opcode == ISD::ANY_EXTEND_VECTOR_INREG)
        Elts.push_back(DAG.getUNDEF(SVT));
      else
        Elts.push_back(DAG.getConstant(0, DL, SVT));
      continue;
    }

    SDLoc DL(Op);
    // Get the constant value and if needed trunc it to the size of the type.
    // Nodes like build_vector might have constants wider than the scalar type.
    APInt C = Op->getAsAPIntVal().zextOrTrunc(EVTBits);
    if (Opcode == ISD::SIGN_EXTEND || Opcode == ISD::SIGN_EXTEND_VECTOR_INREG)
      Elts.push_back(DAG.getConstant(C.sext(VTBits), DL, SVT));
    else
      Elts.push_back(DAG.getConstant(C.zext(VTBits), DL, SVT));
  }

  return DAG.getBuildVector(VT, DL, Elts);
}

// ExtendUsesToFormExtLoad - Trying to extend uses of a load to enable this:
// "fold ({s|z|a}ext (load x)) -> ({s|z|a}ext (truncate ({s|z|a}extload x)))"
// transformation. Returns true if extension are possible and the above
// mentioned transformation is profitable.
static bool ExtendUsesToFormExtLoad(EVT VT, SDNode *N, SDValue N0,
                                    unsigned ExtOpc,
                                    SmallVectorImpl<SDNode *> &ExtendNodes,
                                    const TargetLowering &TLI) {
  bool HasCopyToRegUses = false;
  bool isTruncFree = TLI.isTruncateFree(VT, N0.getValueType());
  for (SDNode::use_iterator UI = N0->use_begin(), UE = N0->use_end(); UI != UE;
       ++UI) {
    SDNode *User = *UI;
    if (User == N)
      continue;
    if (UI.getUse().getResNo() != N0.getResNo())
      continue;
    // FIXME: Only extend SETCC N, N and SETCC N, c for now.
    if (ExtOpc != ISD::ANY_EXTEND && User->getOpcode() == ISD::SETCC) {
      ISD::CondCode CC = cast<CondCodeSDNode>(User->getOperand(2))->get();
      if (ExtOpc == ISD::ZERO_EXTEND && ISD::isSignedIntSetCC(CC))
        // Sign bits will be lost after a zext.
        return false;
      bool Add = false;
      for (unsigned i = 0; i != 2; ++i) {
        SDValue UseOp = User->getOperand(i);
        if (UseOp == N0)
          continue;
        if (!isa<ConstantSDNode>(UseOp))
          return false;
        Add = true;
      }
      if (Add)
        ExtendNodes.push_back(User);
      continue;
    }
    // If truncates aren't free and there are users we can't
    // extend, it isn't worthwhile.
    if (!isTruncFree)
      return false;
    // Remember if this value is live-out.
    if (User->getOpcode() == ISD::CopyToReg)
      HasCopyToRegUses = true;
  }

  if (HasCopyToRegUses) {
    bool BothLiveOut = false;
    for (SDNode::use_iterator UI = N->use_begin(), UE = N->use_end();
         UI != UE; ++UI) {
      SDUse &Use = UI.getUse();
      if (Use.getResNo() == 0 && Use.getUser()->getOpcode() == ISD::CopyToReg) {
        BothLiveOut = true;
        break;
      }
    }
    if (BothLiveOut)
      // Both unextended and extended values are live out. There had better be
      // a good reason for the transformation.
      return !ExtendNodes.empty();
  }
  return true;
}

void DAGCombiner::ExtendSetCCUses(const SmallVectorImpl<SDNode *> &SetCCs,
                                  SDValue OrigLoad, SDValue ExtLoad,
                                  ISD::NodeType ExtType) {
  // Extend SetCC uses if necessary.
  SDLoc DL(ExtLoad);
  for (SDNode *SetCC : SetCCs) {
    SmallVector<SDValue, 4> Ops;

    for (unsigned j = 0; j != 2; ++j) {
      SDValue SOp = SetCC->getOperand(j);
      if (SOp == OrigLoad)
        Ops.push_back(ExtLoad);
      else
        Ops.push_back(DAG.getNode(ExtType, DL, ExtLoad->getValueType(0), SOp));
    }

    Ops.push_back(SetCC->getOperand(2));
    CombineTo(SetCC, DAG.getNode(ISD::SETCC, DL, SetCC->getValueType(0), Ops));
  }
}

// FIXME: Bring more similar combines here, common to sext/zext (maybe aext?).
SDValue DAGCombiner::CombineExtLoad(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT DstVT = N->getValueType(0);
  EVT SrcVT = N0.getValueType();

  assert((N->getOpcode() == ISD::SIGN_EXTEND ||
          N->getOpcode() == ISD::ZERO_EXTEND) &&
         "Unexpected node type (not an extend)!");

  // fold (sext (load x)) to multiple smaller sextloads; same for zext.
  // For example, on a target with legal v4i32, but illegal v8i32, turn:
  //   (v8i32 (sext (v8i16 (load x))))
  // into:
  //   (v8i32 (concat_vectors (v4i32 (sextload x)),
  //                          (v4i32 (sextload (x + 16)))))
  // Where uses of the original load, i.e.:
  //   (v8i16 (load x))
  // are replaced with:
  //   (v8i16 (truncate
  //     (v8i32 (concat_vectors (v4i32 (sextload x)),
  //                            (v4i32 (sextload (x + 16)))))))
  //
  // This combine is only applicable to illegal, but splittable, vectors.
  // All legal types, and illegal non-vector types, are handled elsewhere.
  // This combine is controlled by TargetLowering::isVectorLoadExtDesirable.
  //
  if (N0->getOpcode() != ISD::LOAD)
    return SDValue();

  LoadSDNode *LN0 = cast<LoadSDNode>(N0);

  if (!ISD::isNON_EXTLoad(LN0) || !ISD::isUNINDEXEDLoad(LN0) ||
      !N0.hasOneUse() || !LN0->isSimple() ||
      !DstVT.isVector() || !DstVT.isPow2VectorType() ||
      !TLI.isVectorLoadExtDesirable(SDValue(N, 0)))
    return SDValue();

  SmallVector<SDNode *, 4> SetCCs;
  if (!ExtendUsesToFormExtLoad(DstVT, N, N0, N->getOpcode(), SetCCs, TLI))
    return SDValue();

  ISD::LoadExtType ExtType =
      N->getOpcode() == ISD::SIGN_EXTEND ? ISD::SEXTLOAD : ISD::ZEXTLOAD;

  // Try to split the vector types to get down to legal types.
  EVT SplitSrcVT = SrcVT;
  EVT SplitDstVT = DstVT;
  while (!TLI.isLoadExtLegalOrCustom(ExtType, SplitDstVT, SplitSrcVT) &&
         SplitSrcVT.getVectorNumElements() > 1) {
    SplitDstVT = DAG.GetSplitDestVTs(SplitDstVT).first;
    SplitSrcVT = DAG.GetSplitDestVTs(SplitSrcVT).first;
  }

  if (!TLI.isLoadExtLegalOrCustom(ExtType, SplitDstVT, SplitSrcVT))
    return SDValue();

  assert(!DstVT.isScalableVector() && "Unexpected scalable vector type");

  SDLoc DL(N);
  const unsigned NumSplits =
      DstVT.getVectorNumElements() / SplitDstVT.getVectorNumElements();
  const unsigned Stride = SplitSrcVT.getStoreSize();
  SmallVector<SDValue, 4> Loads;
  SmallVector<SDValue, 4> Chains;

  SDValue BasePtr = LN0->getBasePtr();
  for (unsigned Idx = 0; Idx < NumSplits; Idx++) {
    const unsigned Offset = Idx * Stride;

    SDValue SplitLoad =
        DAG.getExtLoad(ExtType, SDLoc(LN0), SplitDstVT, LN0->getChain(),
                       BasePtr, LN0->getPointerInfo().getWithOffset(Offset),
                       SplitSrcVT, LN0->getOriginalAlign(),
                       LN0->getMemOperand()->getFlags(), LN0->getAAInfo());

    BasePtr = DAG.getMemBasePlusOffset(BasePtr, TypeSize::getFixed(Stride), DL);

    Loads.push_back(SplitLoad.getValue(0));
    Chains.push_back(SplitLoad.getValue(1));
  }

  SDValue NewChain = DAG.getNode(ISD::TokenFactor, DL, MVT::Other, Chains);
  SDValue NewValue = DAG.getNode(ISD::CONCAT_VECTORS, DL, DstVT, Loads);

  // Simplify TF.
  AddToWorklist(NewChain.getNode());

  CombineTo(N, NewValue);

  // Replace uses of the original load (before extension)
  // with a truncate of the concatenated sextloaded vectors.
  SDValue Trunc =
      DAG.getNode(ISD::TRUNCATE, SDLoc(N0), N0.getValueType(), NewValue);
  ExtendSetCCUses(SetCCs, N0, NewValue, (ISD::NodeType)N->getOpcode());
  CombineTo(N0.getNode(), Trunc, NewChain);
  return SDValue(N, 0); // Return N so it doesn't get rechecked!
}

// fold (zext (and/or/xor (shl/shr (load x), cst), cst)) ->
//      (and/or/xor (shl/shr (zextload x), (zext cst)), (zext cst))
SDValue DAGCombiner::CombineZExtLogicopShiftLoad(SDNode *N) {
  assert(N->getOpcode() == ISD::ZERO_EXTEND);
  EVT VT = N->getValueType(0);
  EVT OrigVT = N->getOperand(0).getValueType();
  if (TLI.isZExtFree(OrigVT, VT))
    return SDValue();

  // and/or/xor
  SDValue N0 = N->getOperand(0);
  if (!ISD::isBitwiseLogicOp(N0.getOpcode()) ||
      N0.getOperand(1).getOpcode() != ISD::Constant ||
      (LegalOperations && !TLI.isOperationLegal(N0.getOpcode(), VT)))
    return SDValue();

  // shl/shr
  SDValue N1 = N0->getOperand(0);
  if (!(N1.getOpcode() == ISD::SHL || N1.getOpcode() == ISD::SRL) ||
      N1.getOperand(1).getOpcode() != ISD::Constant ||
      (LegalOperations && !TLI.isOperationLegal(N1.getOpcode(), VT)))
    return SDValue();

  // load
  if (!isa<LoadSDNode>(N1.getOperand(0)))
    return SDValue();
  LoadSDNode *Load = cast<LoadSDNode>(N1.getOperand(0));
  EVT MemVT = Load->getMemoryVT();
  if (!TLI.isLoadExtLegal(ISD::ZEXTLOAD, VT, MemVT) ||
      Load->getExtensionType() == ISD::SEXTLOAD || Load->isIndexed())
    return SDValue();


  // If the shift op is SHL, the logic op must be AND, otherwise the result
  // will be wrong.
  if (N1.getOpcode() == ISD::SHL && N0.getOpcode() != ISD::AND)
    return SDValue();

  if (!N0.hasOneUse() || !N1.hasOneUse())
    return SDValue();

  SmallVector<SDNode*, 4> SetCCs;
  if (!ExtendUsesToFormExtLoad(VT, N1.getNode(), N1.getOperand(0),
                               ISD::ZERO_EXTEND, SetCCs, TLI))
    return SDValue();

  // Actually do the transformation.
  SDValue ExtLoad = DAG.getExtLoad(ISD::ZEXTLOAD, SDLoc(Load), VT,
                                   Load->getChain(), Load->getBasePtr(),
                                   Load->getMemoryVT(), Load->getMemOperand());

  SDLoc DL1(N1);
  SDValue Shift = DAG.getNode(N1.getOpcode(), DL1, VT, ExtLoad,
                              N1.getOperand(1));

  APInt Mask = N0.getConstantOperandAPInt(1).zext(VT.getSizeInBits());
  SDLoc DL0(N0);
  SDValue And = DAG.getNode(N0.getOpcode(), DL0, VT, Shift,
                            DAG.getConstant(Mask, DL0, VT));

  ExtendSetCCUses(SetCCs, N1.getOperand(0), ExtLoad, ISD::ZERO_EXTEND);
  CombineTo(N, And);
  if (SDValue(Load, 0).hasOneUse()) {
    DAG.ReplaceAllUsesOfValueWith(SDValue(Load, 1), ExtLoad.getValue(1));
  } else {
    SDValue Trunc = DAG.getNode(ISD::TRUNCATE, SDLoc(Load),
                                Load->getValueType(0), ExtLoad);
    CombineTo(Load, Trunc, ExtLoad.getValue(1));
  }

  // N0 is dead at this point.
  recursivelyDeleteUnusedNodes(N0.getNode());

  return SDValue(N,0); // Return N so it doesn't get rechecked!
}

/// If we're narrowing or widening the result of a vector select and the final
/// size is the same size as a setcc (compare) feeding the select, then try to
/// apply the cast operation to the select's operands because matching vector
/// sizes for a select condition and other operands should be more efficient.
SDValue DAGCombiner::matchVSelectOpSizesWithSetCC(SDNode *Cast) {
  unsigned CastOpcode = Cast->getOpcode();
  assert((CastOpcode == ISD::SIGN_EXTEND || CastOpcode == ISD::ZERO_EXTEND ||
          CastOpcode == ISD::TRUNCATE || CastOpcode == ISD::FP_EXTEND ||
          CastOpcode == ISD::FP_ROUND) &&
         "Unexpected opcode for vector select narrowing/widening");

  // We only do this transform before legal ops because the pattern may be
  // obfuscated by target-specific operations after legalization. Do not create
  // an illegal select op, however, because that may be difficult to lower.
  EVT VT = Cast->getValueType(0);
  if (LegalOperations || !TLI.isOperationLegalOrCustom(ISD::VSELECT, VT))
    return SDValue();

  SDValue VSel = Cast->getOperand(0);
  if (VSel.getOpcode() != ISD::VSELECT || !VSel.hasOneUse() ||
      VSel.getOperand(0).getOpcode() != ISD::SETCC)
    return SDValue();

  // Does the setcc have the same vector size as the casted select?
  SDValue SetCC = VSel.getOperand(0);
  EVT SetCCVT = getSetCCResultType(SetCC.getOperand(0).getValueType());
  if (SetCCVT.getSizeInBits() != VT.getSizeInBits())
    return SDValue();

  // cast (vsel (setcc X), A, B) --> vsel (setcc X), (cast A), (cast B)
  SDValue A = VSel.getOperand(1);
  SDValue B = VSel.getOperand(2);
  SDValue CastA, CastB;
  SDLoc DL(Cast);
  if (CastOpcode == ISD::FP_ROUND) {
    // FP_ROUND (fptrunc) has an extra flag operand to pass along.
    CastA = DAG.getNode(CastOpcode, DL, VT, A, Cast->getOperand(1));
    CastB = DAG.getNode(CastOpcode, DL, VT, B, Cast->getOperand(1));
  } else {
    CastA = DAG.getNode(CastOpcode, DL, VT, A);
    CastB = DAG.getNode(CastOpcode, DL, VT, B);
  }
  return DAG.getNode(ISD::VSELECT, DL, VT, SetCC, CastA, CastB);
}

// fold ([s|z]ext ([s|z]extload x)) -> ([s|z]ext (truncate ([s|z]extload x)))
// fold ([s|z]ext (     extload x)) -> ([s|z]ext (truncate ([s|z]extload x)))
static SDValue tryToFoldExtOfExtload(SelectionDAG &DAG, DAGCombiner &Combiner,
                                     const TargetLowering &TLI, EVT VT,
                                     bool LegalOperations, SDNode *N,
                                     SDValue N0, ISD::LoadExtType ExtLoadType) {
  SDNode *N0Node = N0.getNode();
  bool isAExtLoad = (ExtLoadType == ISD::SEXTLOAD) ? ISD::isSEXTLoad(N0Node)
                                                   : ISD::isZEXTLoad(N0Node);
  if ((!isAExtLoad && !ISD::isEXTLoad(N0Node)) ||
      !ISD::isUNINDEXEDLoad(N0Node) || !N0.hasOneUse())
    return SDValue();

  LoadSDNode *LN0 = cast<LoadSDNode>(N0);
  EVT MemVT = LN0->getMemoryVT();
  if ((LegalOperations || !LN0->isSimple() ||
       VT.isVector()) &&
      !TLI.isLoadExtLegal(ExtLoadType, VT, MemVT))
    return SDValue();

  SDValue ExtLoad =
      DAG.getExtLoad(ExtLoadType, SDLoc(LN0), VT, LN0->getChain(),
                     LN0->getBasePtr(), MemVT, LN0->getMemOperand());
  Combiner.CombineTo(N, ExtLoad);
  DAG.ReplaceAllUsesOfValueWith(SDValue(LN0, 1), ExtLoad.getValue(1));
  if (LN0->use_empty())
    Combiner.recursivelyDeleteUnusedNodes(LN0);
  return SDValue(N, 0); // Return N so it doesn't get rechecked!
}

// fold ([s|z]ext (load x)) -> ([s|z]ext (truncate ([s|z]extload x)))
// Only generate vector extloads when 1) they're legal, and 2) they are
// deemed desirable by the target. NonNegZExt can be set to true if a zero
// extend has the nonneg flag to allow use of sextload if profitable.
static SDValue tryToFoldExtOfLoad(SelectionDAG &DAG, DAGCombiner &Combiner,
                                  const TargetLowering &TLI, EVT VT,
                                  bool LegalOperations, SDNode *N, SDValue N0,
                                  ISD::LoadExtType ExtLoadType,
                                  ISD::NodeType ExtOpc,
                                  bool NonNegZExt = false) {
  if (!ISD::isNON_EXTLoad(N0.getNode()) || !ISD::isUNINDEXEDLoad(N0.getNode()))
    return {};

  // If this is zext nneg, see if it would make sense to treat it as a sext.
  if (NonNegZExt) {
    assert(ExtLoadType == ISD::ZEXTLOAD && ExtOpc == ISD::ZERO_EXTEND &&
           "Unexpected load type or opcode");
    for (SDNode *User : N0->uses()) {
      if (User->getOpcode() == ISD::SETCC) {
        ISD::CondCode CC = cast<CondCodeSDNode>(User->getOperand(2))->get();
        if (ISD::isSignedIntSetCC(CC)) {
          ExtLoadType = ISD::SEXTLOAD;
          ExtOpc = ISD::SIGN_EXTEND;
          break;
        }
      }
    }
  }

  // TODO: isFixedLengthVector() should be removed and any negative effects on
  // code generation being the result of that target's implementation of
  // isVectorLoadExtDesirable().
  if ((LegalOperations || VT.isFixedLengthVector() ||
       !cast<LoadSDNode>(N0)->isSimple()) &&
      !TLI.isLoadExtLegal(ExtLoadType, VT, N0.getValueType()))
    return {};

  bool DoXform = true;
  SmallVector<SDNode *, 4> SetCCs;
  if (!N0.hasOneUse())
    DoXform = ExtendUsesToFormExtLoad(VT, N, N0, ExtOpc, SetCCs, TLI);
  if (VT.isVector())
    DoXform &= TLI.isVectorLoadExtDesirable(SDValue(N, 0));
  if (!DoXform)
    return {};

  LoadSDNode *LN0 = cast<LoadSDNode>(N0);
  SDValue ExtLoad = DAG.getExtLoad(ExtLoadType, SDLoc(LN0), VT, LN0->getChain(),
                                   LN0->getBasePtr(), N0.getValueType(),
                                   LN0->getMemOperand());
  Combiner.ExtendSetCCUses(SetCCs, N0, ExtLoad, ExtOpc);
  // If the load value is used only by N, replace it via CombineTo N.
  bool NoReplaceTrunc = SDValue(LN0, 0).hasOneUse();
  Combiner.CombineTo(N, ExtLoad);
  if (NoReplaceTrunc) {
    DAG.ReplaceAllUsesOfValueWith(SDValue(LN0, 1), ExtLoad.getValue(1));
    Combiner.recursivelyDeleteUnusedNodes(LN0);
  } else {
    SDValue Trunc =
        DAG.getNode(ISD::TRUNCATE, SDLoc(N0), N0.getValueType(), ExtLoad);
    Combiner.CombineTo(LN0, Trunc, ExtLoad.getValue(1));
  }
  return SDValue(N, 0); // Return N so it doesn't get rechecked!
}

static SDValue
tryToFoldExtOfMaskedLoad(SelectionDAG &DAG, const TargetLowering &TLI, EVT VT,
                         bool LegalOperations, SDNode *N, SDValue N0,
                         ISD::LoadExtType ExtLoadType, ISD::NodeType ExtOpc) {
  if (!N0.hasOneUse())
    return SDValue();

  MaskedLoadSDNode *Ld = dyn_cast<MaskedLoadSDNode>(N0);
  if (!Ld || Ld->getExtensionType() != ISD::NON_EXTLOAD)
    return SDValue();

  if ((LegalOperations || !cast<MaskedLoadSDNode>(N0)->isSimple()) &&
      !TLI.isLoadExtLegalOrCustom(ExtLoadType, VT, Ld->getValueType(0)))
    return SDValue();

  if (!TLI.isVectorLoadExtDesirable(SDValue(N, 0)))
    return SDValue();

  SDLoc dl(Ld);
  SDValue PassThru = DAG.getNode(ExtOpc, dl, VT, Ld->getPassThru());
  SDValue NewLoad = DAG.getMaskedLoad(
      VT, dl, Ld->getChain(), Ld->getBasePtr(), Ld->getOffset(), Ld->getMask(),
      PassThru, Ld->getMemoryVT(), Ld->getMemOperand(), Ld->getAddressingMode(),
      ExtLoadType, Ld->isExpandingLoad());
  DAG.ReplaceAllUsesOfValueWith(SDValue(Ld, 1), SDValue(NewLoad.getNode(), 1));
  return NewLoad;
}

// fold ([s|z]ext (atomic_load)) -> ([s|z]ext (truncate ([s|z]ext atomic_load)))
static SDValue tryToFoldExtOfAtomicLoad(SelectionDAG &DAG,
                                        const TargetLowering &TLI, EVT VT,
                                        SDValue N0,
                                        ISD::LoadExtType ExtLoadType) {
  auto *ALoad = dyn_cast<AtomicSDNode>(N0);
  if (!ALoad || ALoad->getOpcode() != ISD::ATOMIC_LOAD)
    return {};
  EVT MemoryVT = ALoad->getMemoryVT();
  if (!TLI.isAtomicLoadExtLegal(ExtLoadType, VT, MemoryVT))
    return {};
  // Can't fold into ALoad if it is already extending differently.
  ISD::LoadExtType ALoadExtTy = ALoad->getExtensionType();
  if ((ALoadExtTy == ISD::ZEXTLOAD && ExtLoadType == ISD::SEXTLOAD) ||
      (ALoadExtTy == ISD::SEXTLOAD && ExtLoadType == ISD::ZEXTLOAD))
    return {};

  EVT OrigVT = ALoad->getValueType(0);
  assert(OrigVT.getSizeInBits() < VT.getSizeInBits() && "VT should be wider.");
  auto *NewALoad = cast<AtomicSDNode>(DAG.getAtomic(
      ISD::ATOMIC_LOAD, SDLoc(ALoad), MemoryVT, VT, ALoad->getChain(),
      ALoad->getBasePtr(), ALoad->getMemOperand()));
  NewALoad->setExtensionType(ExtLoadType);
  DAG.ReplaceAllUsesOfValueWith(
      SDValue(ALoad, 0),
      DAG.getNode(ISD::TRUNCATE, SDLoc(ALoad), OrigVT, SDValue(NewALoad, 0)));
  // Update the chain uses.
  DAG.ReplaceAllUsesOfValueWith(SDValue(ALoad, 1), SDValue(NewALoad, 1));
  return SDValue(NewALoad, 0);
}

static SDValue foldExtendedSignBitTest(SDNode *N, SelectionDAG &DAG,
                                       bool LegalOperations) {
  assert((N->getOpcode() == ISD::SIGN_EXTEND ||
          N->getOpcode() == ISD::ZERO_EXTEND) && "Expected sext or zext");

  SDValue SetCC = N->getOperand(0);
  if (LegalOperations || SetCC.getOpcode() != ISD::SETCC ||
      !SetCC.hasOneUse() || SetCC.getValueType() != MVT::i1)
    return SDValue();

  SDValue X = SetCC.getOperand(0);
  SDValue Ones = SetCC.getOperand(1);
  ISD::CondCode CC = cast<CondCodeSDNode>(SetCC.getOperand(2))->get();
  EVT VT = N->getValueType(0);
  EVT XVT = X.getValueType();
  // setge X, C is canonicalized to setgt, so we do not need to match that
  // pattern. The setlt sibling is folded in SimplifySelectCC() because it does
  // not require the 'not' op.
  if (CC == ISD::SETGT && isAllOnesConstant(Ones) && VT == XVT) {
    // Invert and smear/shift the sign bit:
    // sext i1 (setgt iN X, -1) --> sra (not X), (N - 1)
    // zext i1 (setgt iN X, -1) --> srl (not X), (N - 1)
    SDLoc DL(N);
    unsigned ShCt = VT.getSizeInBits() - 1;
    const TargetLowering &TLI = DAG.getTargetLoweringInfo();
    if (!TLI.shouldAvoidTransformToShift(VT, ShCt)) {
      SDValue NotX = DAG.getNOT(DL, X, VT);
      SDValue ShiftAmount = DAG.getConstant(ShCt, DL, VT);
      auto ShiftOpcode =
        N->getOpcode() == ISD::SIGN_EXTEND ? ISD::SRA : ISD::SRL;
      return DAG.getNode(ShiftOpcode, DL, VT, NotX, ShiftAmount);
    }
  }
  return SDValue();
}

SDValue DAGCombiner::foldSextSetcc(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  if (N0.getOpcode() != ISD::SETCC)
    return SDValue();

  SDValue N00 = N0.getOperand(0);
  SDValue N01 = N0.getOperand(1);
  ISD::CondCode CC = cast<CondCodeSDNode>(N0.getOperand(2))->get();
  EVT VT = N->getValueType(0);
  EVT N00VT = N00.getValueType();
  SDLoc DL(N);

  // Propagate fast-math-flags.
  SelectionDAG::FlagInserter FlagsInserter(DAG, N0->getFlags());

  // On some architectures (such as SSE/NEON/etc) the SETCC result type is
  // the same size as the compared operands. Try to optimize sext(setcc())
  // if this is the case.
  if (VT.isVector() && !LegalOperations &&
      TLI.getBooleanContents(N00VT) ==
          TargetLowering::ZeroOrNegativeOneBooleanContent) {
    EVT SVT = getSetCCResultType(N00VT);

    // If we already have the desired type, don't change it.
    if (SVT != N0.getValueType()) {
      // We know that the # elements of the results is the same as the
      // # elements of the compare (and the # elements of the compare result
      // for that matter).  Check to see that they are the same size.  If so,
      // we know that the element size of the sext'd result matches the
      // element size of the compare operands.
      if (VT.getSizeInBits() == SVT.getSizeInBits())
        return DAG.getSetCC(DL, VT, N00, N01, CC);

      // If the desired elements are smaller or larger than the source
      // elements, we can use a matching integer vector type and then
      // truncate/sign extend.
      EVT MatchingVecType = N00VT.changeVectorElementTypeToInteger();
      if (SVT == MatchingVecType) {
        SDValue VsetCC = DAG.getSetCC(DL, MatchingVecType, N00, N01, CC);
        return DAG.getSExtOrTrunc(VsetCC, DL, VT);
      }
    }

    // Try to eliminate the sext of a setcc by zexting the compare operands.
    if (N0.hasOneUse() && TLI.isOperationLegalOrCustom(ISD::SETCC, VT) &&
        !TLI.isOperationLegalOrCustom(ISD::SETCC, SVT)) {
      bool IsSignedCmp = ISD::isSignedIntSetCC(CC);
      unsigned LoadOpcode = IsSignedCmp ? ISD::SEXTLOAD : ISD::ZEXTLOAD;
      unsigned ExtOpcode = IsSignedCmp ? ISD::SIGN_EXTEND : ISD::ZERO_EXTEND;

      // We have an unsupported narrow vector compare op that would be legal
      // if extended to the destination type. See if the compare operands
      // can be freely extended to the destination type.
      auto IsFreeToExtend = [&](SDValue V) {
        if (isConstantOrConstantVector(V, /*NoOpaques*/ true))
          return true;
        // Match a simple, non-extended load that can be converted to a
        // legal {z/s}ext-load.
        // TODO: Allow widening of an existing {z/s}ext-load?
        if (!(ISD::isNON_EXTLoad(V.getNode()) &&
              ISD::isUNINDEXEDLoad(V.getNode()) &&
              cast<LoadSDNode>(V)->isSimple() &&
              TLI.isLoadExtLegal(LoadOpcode, VT, V.getValueType())))
          return false;

        // Non-chain users of this value must either be the setcc in this
        // sequence or extends that can be folded into the new {z/s}ext-load.
        for (SDNode::use_iterator UI = V->use_begin(), UE = V->use_end();
             UI != UE; ++UI) {
          // Skip uses of the chain and the setcc.
          SDNode *User = *UI;
          if (UI.getUse().getResNo() != 0 || User == N0.getNode())
            continue;
          // Extra users must have exactly the same cast we are about to create.
          // TODO: This restriction could be eased if ExtendUsesToFormExtLoad()
          //       is enhanced similarly.
          if (User->getOpcode() != ExtOpcode || User->getValueType(0) != VT)
            return false;
        }
        return true;
      };

      if (IsFreeToExtend(N00) && IsFreeToExtend(N01)) {
        SDValue Ext0 = DAG.getNode(ExtOpcode, DL, VT, N00);
        SDValue Ext1 = DAG.getNode(ExtOpcode, DL, VT, N01);
        return DAG.getSetCC(DL, VT, Ext0, Ext1, CC);
      }
    }
  }

  // sext(setcc x, y, cc) -> (select (setcc x, y, cc), T, 0)
  // Here, T can be 1 or -1, depending on the type of the setcc and
  // getBooleanContents().
  unsigned SetCCWidth = N0.getScalarValueSizeInBits();

  // To determine the "true" side of the select, we need to know the high bit
  // of the value returned by the setcc if it evaluates to true.
  // If the type of the setcc is i1, then the true case of the select is just
  // sext(i1 1), that is, -1.
  // If the type of the setcc is larger (say, i8) then the value of the high
  // bit depends on getBooleanContents(), so ask TLI for a real "true" value
  // of the appropriate width.
  SDValue ExtTrueVal = (SetCCWidth == 1)
                           ? DAG.getAllOnesConstant(DL, VT)
                           : DAG.getBoolConstant(true, DL, VT, N00VT);
  SDValue Zero = DAG.getConstant(0, DL, VT);
  if (SDValue SCC = SimplifySelectCC(DL, N00, N01, ExtTrueVal, Zero, CC, true))
    return SCC;

  if (!VT.isVector() && !shouldConvertSelectOfConstantsToMath(N0, VT, TLI)) {
    EVT SetCCVT = getSetCCResultType(N00VT);
    // Don't do this transform for i1 because there's a select transform
    // that would reverse it.
    // TODO: We should not do this transform at all without a target hook
    // because a sext is likely cheaper than a select?
    if (SetCCVT.getScalarSizeInBits() != 1 &&
        (!LegalOperations || TLI.isOperationLegal(ISD::SETCC, N00VT))) {
      SDValue SetCC = DAG.getSetCC(DL, SetCCVT, N00, N01, CC);
      return DAG.getSelect(DL, VT, SetCC, ExtTrueVal, Zero);
    }
  }

  return SDValue();
}

SDValue DAGCombiner::visitSIGN_EXTEND(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  if (VT.isVector())
    if (SDValue FoldedVOp = SimplifyVCastOp(N, DL))
      return FoldedVOp;

  // sext(undef) = 0 because the top bit will all be the same.
  if (N0.isUndef())
    return DAG.getConstant(0, DL, VT);

  if (SDValue Res = tryToFoldExtendOfConstant(N, DL, TLI, DAG, LegalTypes))
    return Res;

  // fold (sext (sext x)) -> (sext x)
  // fold (sext (aext x)) -> (sext x)
  if (N0.getOpcode() == ISD::SIGN_EXTEND || N0.getOpcode() == ISD::ANY_EXTEND)
    return DAG.getNode(ISD::SIGN_EXTEND, DL, VT, N0.getOperand(0));

  // fold (sext (aext_extend_vector_inreg x)) -> (sext_extend_vector_inreg x)
  // fold (sext (sext_extend_vector_inreg x)) -> (sext_extend_vector_inreg x)
  if (N0.getOpcode() == ISD::ANY_EXTEND_VECTOR_INREG ||
      N0.getOpcode() == ISD::SIGN_EXTEND_VECTOR_INREG)
    return DAG.getNode(ISD::SIGN_EXTEND_VECTOR_INREG, SDLoc(N), VT,
                       N0.getOperand(0));

  // fold (sext (sext_inreg x)) -> (sext (trunc x))
  if (N0.getOpcode() == ISD::SIGN_EXTEND_INREG) {
    SDValue N00 = N0.getOperand(0);
    EVT ExtVT = cast<VTSDNode>(N0->getOperand(1))->getVT();
    if ((N00.getOpcode() == ISD::TRUNCATE || TLI.isTruncateFree(N00, ExtVT)) &&
        (!LegalTypes || TLI.isTypeLegal(ExtVT))) {
      SDValue T = DAG.getNode(ISD::TRUNCATE, DL, ExtVT, N00);
      return DAG.getNode(ISD::SIGN_EXTEND, DL, VT, T);
    }
  }

  if (N0.getOpcode() == ISD::TRUNCATE) {
    // fold (sext (truncate (load x))) -> (sext (smaller load x))
    // fold (sext (truncate (srl (load x), c))) -> (sext (smaller load (x+c/n)))
    if (SDValue NarrowLoad = reduceLoadWidth(N0.getNode())) {
      SDNode *oye = N0.getOperand(0).getNode();
      if (NarrowLoad.getNode() != N0.getNode()) {
        CombineTo(N0.getNode(), NarrowLoad);
        // CombineTo deleted the truncate, if needed, but not what's under it.
        AddToWorklist(oye);
      }
      return SDValue(N, 0);   // Return N so it doesn't get rechecked!
    }

    // See if the value being truncated is already sign extended.  If so, just
    // eliminate the trunc/sext pair.
    SDValue Op = N0.getOperand(0);
    unsigned OpBits   = Op.getScalarValueSizeInBits();
    unsigned MidBits  = N0.getScalarValueSizeInBits();
    unsigned DestBits = VT.getScalarSizeInBits();

    if (N0->getFlags().hasNoSignedWrap() ||
        DAG.ComputeNumSignBits(Op) > OpBits - MidBits) {
      if (OpBits == DestBits) {
        // Op is i32, Mid is i8, and Dest is i32.  If Op has more than 24 sign
        // bits, it is already ready.
        return Op;
      }

      if (OpBits < DestBits) {
        // Op is i32, Mid is i8, and Dest is i64.  If Op has more than 24 sign
        // bits, just sext from i32.
        return DAG.getNode(ISD::SIGN_EXTEND, DL, VT, Op);
      }

      // Op is i64, Mid is i8, and Dest is i32.  If Op has more than 56 sign
      // bits, just truncate to i32.
      SDNodeFlags Flags;
      Flags.setNoSignedWrap(true);
      Flags.setNoUnsignedWrap(N0->getFlags().hasNoUnsignedWrap());
      return DAG.getNode(ISD::TRUNCATE, DL, VT, Op, Flags);
    }

    // fold (sext (truncate x)) -> (sextinreg x).
    if (!LegalOperations || TLI.isOperationLegal(ISD::SIGN_EXTEND_INREG,
                                                 N0.getValueType())) {
      if (OpBits < DestBits)
        Op = DAG.getNode(ISD::ANY_EXTEND, SDLoc(N0), VT, Op);
      else if (OpBits > DestBits)
        Op = DAG.getNode(ISD::TRUNCATE, SDLoc(N0), VT, Op);
      return DAG.getNode(ISD::SIGN_EXTEND_INREG, DL, VT, Op,
                         DAG.getValueType(N0.getValueType()));
    }
  }

  // Try to simplify (sext (load x)).
  if (SDValue foldedExt =
          tryToFoldExtOfLoad(DAG, *this, TLI, VT, LegalOperations, N, N0,
                             ISD::SEXTLOAD, ISD::SIGN_EXTEND))
    return foldedExt;

  if (SDValue foldedExt =
          tryToFoldExtOfMaskedLoad(DAG, TLI, VT, LegalOperations, N, N0,
                                   ISD::SEXTLOAD, ISD::SIGN_EXTEND))
    return foldedExt;

  // fold (sext (load x)) to multiple smaller sextloads.
  // Only on illegal but splittable vectors.
  if (SDValue ExtLoad = CombineExtLoad(N))
    return ExtLoad;

  // Try to simplify (sext (sextload x)).
  if (SDValue foldedExt = tryToFoldExtOfExtload(
          DAG, *this, TLI, VT, LegalOperations, N, N0, ISD::SEXTLOAD))
    return foldedExt;

  // Try to simplify (sext (atomic_load x)).
  if (SDValue foldedExt =
          tryToFoldExtOfAtomicLoad(DAG, TLI, VT, N0, ISD::SEXTLOAD))
    return foldedExt;

  // fold (sext (and/or/xor (load x), cst)) ->
  //      (and/or/xor (sextload x), (sext cst))
  if (ISD::isBitwiseLogicOp(N0.getOpcode()) &&
      isa<LoadSDNode>(N0.getOperand(0)) &&
      N0.getOperand(1).getOpcode() == ISD::Constant &&
      (!LegalOperations && TLI.isOperationLegal(N0.getOpcode(), VT))) {
    LoadSDNode *LN00 = cast<LoadSDNode>(N0.getOperand(0));
    EVT MemVT = LN00->getMemoryVT();
    if (TLI.isLoadExtLegal(ISD::SEXTLOAD, VT, MemVT) &&
      LN00->getExtensionType() != ISD::ZEXTLOAD && LN00->isUnindexed()) {
      SmallVector<SDNode*, 4> SetCCs;
      bool DoXform = ExtendUsesToFormExtLoad(VT, N0.getNode(), N0.getOperand(0),
                                             ISD::SIGN_EXTEND, SetCCs, TLI);
      if (DoXform) {
        SDValue ExtLoad = DAG.getExtLoad(ISD::SEXTLOAD, SDLoc(LN00), VT,
                                         LN00->getChain(), LN00->getBasePtr(),
                                         LN00->getMemoryVT(),
                                         LN00->getMemOperand());
        APInt Mask = N0.getConstantOperandAPInt(1).sext(VT.getSizeInBits());
        SDValue And = DAG.getNode(N0.getOpcode(), DL, VT,
                                  ExtLoad, DAG.getConstant(Mask, DL, VT));
        ExtendSetCCUses(SetCCs, N0.getOperand(0), ExtLoad, ISD::SIGN_EXTEND);
        bool NoReplaceTruncAnd = !N0.hasOneUse();
        bool NoReplaceTrunc = SDValue(LN00, 0).hasOneUse();
        CombineTo(N, And);
        // If N0 has multiple uses, change other uses as well.
        if (NoReplaceTruncAnd) {
          SDValue TruncAnd =
              DAG.getNode(ISD::TRUNCATE, DL, N0.getValueType(), And);
          CombineTo(N0.getNode(), TruncAnd);
        }
        if (NoReplaceTrunc) {
          DAG.ReplaceAllUsesOfValueWith(SDValue(LN00, 1), ExtLoad.getValue(1));
        } else {
          SDValue Trunc = DAG.getNode(ISD::TRUNCATE, SDLoc(LN00),
                                      LN00->getValueType(0), ExtLoad);
          CombineTo(LN00, Trunc, ExtLoad.getValue(1));
        }
        return SDValue(N,0); // Return N so it doesn't get rechecked!
      }
    }
  }

  if (SDValue V = foldExtendedSignBitTest(N, DAG, LegalOperations))
    return V;

  if (SDValue V = foldSextSetcc(N))
    return V;

  // fold (sext x) -> (zext x) if the sign bit is known zero.
  if (!TLI.isSExtCheaperThanZExt(N0.getValueType(), VT) &&
      (!LegalOperations || TLI.isOperationLegal(ISD::ZERO_EXTEND, VT)) &&
      DAG.SignBitIsZero(N0))
    return DAG.getNode(ISD::ZERO_EXTEND, DL, VT, N0, SDNodeFlags::NonNeg);

  if (SDValue NewVSel = matchVSelectOpSizesWithSetCC(N))
    return NewVSel;

  // Eliminate this sign extend by doing a negation in the destination type:
  // sext i32 (0 - (zext i8 X to i32)) to i64 --> 0 - (zext i8 X to i64)
  if (N0.getOpcode() == ISD::SUB && N0.hasOneUse() &&
      isNullOrNullSplat(N0.getOperand(0)) &&
      N0.getOperand(1).getOpcode() == ISD::ZERO_EXTEND &&
      TLI.isOperationLegalOrCustom(ISD::SUB, VT)) {
    SDValue Zext = DAG.getZExtOrTrunc(N0.getOperand(1).getOperand(0), DL, VT);
    return DAG.getNegative(Zext, DL, VT);
  }
  // Eliminate this sign extend by doing a decrement in the destination type:
  // sext i32 ((zext i8 X to i32) + (-1)) to i64 --> (zext i8 X to i64) + (-1)
  if (N0.getOpcode() == ISD::ADD && N0.hasOneUse() &&
      isAllOnesOrAllOnesSplat(N0.getOperand(1)) &&
      N0.getOperand(0).getOpcode() == ISD::ZERO_EXTEND &&
      TLI.isOperationLegalOrCustom(ISD::ADD, VT)) {
    SDValue Zext = DAG.getZExtOrTrunc(N0.getOperand(0).getOperand(0), DL, VT);
    return DAG.getNode(ISD::ADD, DL, VT, Zext, DAG.getAllOnesConstant(DL, VT));
  }

  // fold sext (not i1 X) -> add (zext i1 X), -1
  // TODO: This could be extended to handle bool vectors.
  if (N0.getValueType() == MVT::i1 && isBitwiseNot(N0) && N0.hasOneUse() &&
      (!LegalOperations || (TLI.isOperationLegal(ISD::ZERO_EXTEND, VT) &&
                            TLI.isOperationLegal(ISD::ADD, VT)))) {
    // If we can eliminate the 'not', the sext form should be better
    if (SDValue NewXor = visitXOR(N0.getNode())) {
      // Returning N0 is a form of in-visit replacement that may have
      // invalidated N0.
      if (NewXor.getNode() == N0.getNode()) {
        // Return SDValue here as the xor should have already been replaced in
        // this sext.
        return SDValue();
      }

      // Return a new sext with the new xor.
      return DAG.getNode(ISD::SIGN_EXTEND, DL, VT, NewXor);
    }

    SDValue Zext = DAG.getNode(ISD::ZERO_EXTEND, DL, VT, N0.getOperand(0));
    return DAG.getNode(ISD::ADD, DL, VT, Zext, DAG.getAllOnesConstant(DL, VT));
  }

  if (SDValue Res = tryToFoldExtendSelectLoad(N, TLI, DAG, DL, Level))
    return Res;

  return SDValue();
}

/// Given an extending node with a pop-count operand, if the target does not
/// support a pop-count in the narrow source type but does support it in the
/// destination type, widen the pop-count to the destination type.
static SDValue widenCtPop(SDNode *Extend, SelectionDAG &DAG, const SDLoc &DL) {
  assert((Extend->getOpcode() == ISD::ZERO_EXTEND ||
          Extend->getOpcode() == ISD::ANY_EXTEND) &&
         "Expected extend op");

  SDValue CtPop = Extend->getOperand(0);
  if (CtPop.getOpcode() != ISD::CTPOP || !CtPop.hasOneUse())
    return SDValue();

  EVT VT = Extend->getValueType(0);
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  if (TLI.isOperationLegalOrCustom(ISD::CTPOP, CtPop.getValueType()) ||
      !TLI.isOperationLegalOrCustom(ISD::CTPOP, VT))
    return SDValue();

  // zext (ctpop X) --> ctpop (zext X)
  SDValue NewZext = DAG.getZExtOrTrunc(CtPop.getOperand(0), DL, VT);
  return DAG.getNode(ISD::CTPOP, DL, VT, NewZext);
}

// If we have (zext (abs X)) where X is a type that will be promoted by type
// legalization, convert to (abs (sext X)). But don't extend past a legal type.
static SDValue widenAbs(SDNode *Extend, SelectionDAG &DAG) {
  assert(Extend->getOpcode() == ISD::ZERO_EXTEND && "Expected zero extend.");

  EVT VT = Extend->getValueType(0);
  if (VT.isVector())
    return SDValue();

  SDValue Abs = Extend->getOperand(0);
  if (Abs.getOpcode() != ISD::ABS || !Abs.hasOneUse())
    return SDValue();

  EVT AbsVT = Abs.getValueType();
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  if (TLI.getTypeAction(*DAG.getContext(), AbsVT) !=
      TargetLowering::TypePromoteInteger)
    return SDValue();

  EVT LegalVT = TLI.getTypeToTransformTo(*DAG.getContext(), AbsVT);

  SDValue SExt =
      DAG.getNode(ISD::SIGN_EXTEND, SDLoc(Abs), LegalVT, Abs.getOperand(0));
  SDValue NewAbs = DAG.getNode(ISD::ABS, SDLoc(Abs), LegalVT, SExt);
  return DAG.getZExtOrTrunc(NewAbs, SDLoc(Extend), VT);
}

SDValue DAGCombiner::visitZERO_EXTEND(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  if (VT.isVector())
    if (SDValue FoldedVOp = SimplifyVCastOp(N, DL))
      return FoldedVOp;

  // zext(undef) = 0
  if (N0.isUndef())
    return DAG.getConstant(0, DL, VT);

  if (SDValue Res = tryToFoldExtendOfConstant(N, DL, TLI, DAG, LegalTypes))
    return Res;

  // fold (zext (zext x)) -> (zext x)
  // fold (zext (aext x)) -> (zext x)
  if (N0.getOpcode() == ISD::ZERO_EXTEND || N0.getOpcode() == ISD::ANY_EXTEND) {
    SDNodeFlags Flags;
    if (N0.getOpcode() == ISD::ZERO_EXTEND)
      Flags.setNonNeg(N0->getFlags().hasNonNeg());
    return DAG.getNode(ISD::ZERO_EXTEND, DL, VT, N0.getOperand(0), Flags);
  }

  // fold (zext (aext_extend_vector_inreg x)) -> (zext_extend_vector_inreg x)
  // fold (zext (zext_extend_vector_inreg x)) -> (zext_extend_vector_inreg x)
  if (N0.getOpcode() == ISD::ANY_EXTEND_VECTOR_INREG ||
      N0.getOpcode() == ISD::ZERO_EXTEND_VECTOR_INREG)
    return DAG.getNode(ISD::ZERO_EXTEND_VECTOR_INREG, DL, VT, N0.getOperand(0));

  // fold (zext (truncate x)) -> (zext x) or
  //      (zext (truncate x)) -> (truncate x)
  // This is valid when the truncated bits of x are already zero.
  SDValue Op;
  KnownBits Known;
  if (isTruncateOf(DAG, N0, Op, Known)) {
    APInt TruncatedBits =
      (Op.getScalarValueSizeInBits() == N0.getScalarValueSizeInBits()) ?
      APInt(Op.getScalarValueSizeInBits(), 0) :
      APInt::getBitsSet(Op.getScalarValueSizeInBits(),
                        N0.getScalarValueSizeInBits(),
                        std::min(Op.getScalarValueSizeInBits(),
                                 VT.getScalarSizeInBits()));
    if (TruncatedBits.isSubsetOf(Known.Zero)) {
      SDValue ZExtOrTrunc = DAG.getZExtOrTrunc(Op, DL, VT);
      DAG.salvageDebugInfo(*N0.getNode());

      return ZExtOrTrunc;
    }
  }

  // fold (zext (truncate x)) -> (and x, mask)
  if (N0.getOpcode() == ISD::TRUNCATE) {
    // fold (zext (truncate (load x))) -> (zext (smaller load x))
    // fold (zext (truncate (srl (load x), c))) -> (zext (smaller load (x+c/n)))
    if (SDValue NarrowLoad = reduceLoadWidth(N0.getNode())) {
      SDNode *oye = N0.getOperand(0).getNode();
      if (NarrowLoad.getNode() != N0.getNode()) {
        CombineTo(N0.getNode(), NarrowLoad);
        // CombineTo deleted the truncate, if needed, but not what's under it.
        AddToWorklist(oye);
      }
      return SDValue(N, 0); // Return N so it doesn't get rechecked!
    }

    EVT SrcVT = N0.getOperand(0).getValueType();
    EVT MinVT = N0.getValueType();

    if (N->getFlags().hasNonNeg()) {
      SDValue Op = N0.getOperand(0);
      unsigned OpBits = SrcVT.getScalarSizeInBits();
      unsigned MidBits = MinVT.getScalarSizeInBits();
      unsigned DestBits = VT.getScalarSizeInBits();

      if (N0->getFlags().hasNoSignedWrap() ||
          DAG.ComputeNumSignBits(Op) > OpBits - MidBits) {
        if (OpBits == DestBits) {
          // Op is i32, Mid is i8, and Dest is i32.  If Op has more than 24 sign
          // bits, it is already ready.
          return Op;
        }

        if (OpBits < DestBits) {
          // Op is i32, Mid is i8, and Dest is i64.  If Op has more than 24 sign
          // bits, just sext from i32.
          // FIXME: This can probably be ZERO_EXTEND nneg?
          return DAG.getNode(ISD::SIGN_EXTEND, DL, VT, Op);
        }

        // Op is i64, Mid is i8, and Dest is i32.  If Op has more than 56 sign
        // bits, just truncate to i32.
        SDNodeFlags Flags;
        Flags.setNoSignedWrap(true);
        Flags.setNoUnsignedWrap(true);
        return DAG.getNode(ISD::TRUNCATE, DL, VT, Op, Flags);
      }
    }

    // Try to mask before the extension to avoid having to generate a larger mask,
    // possibly over several sub-vectors.
    if (SrcVT.bitsLT(VT) && VT.isVector()) {
      if (!LegalOperations || (TLI.isOperationLegal(ISD::AND, SrcVT) &&
                               TLI.isOperationLegal(ISD::ZERO_EXTEND, VT))) {
        SDValue Op = N0.getOperand(0);
        Op = DAG.getZeroExtendInReg(Op, DL, MinVT);
        AddToWorklist(Op.getNode());
        SDValue ZExtOrTrunc = DAG.getZExtOrTrunc(Op, DL, VT);
        // Transfer the debug info; the new node is equivalent to N0.
        DAG.transferDbgValues(N0, ZExtOrTrunc);
        return ZExtOrTrunc;
      }
    }

    if (!LegalOperations || TLI.isOperationLegal(ISD::AND, VT)) {
      SDValue Op = DAG.getAnyExtOrTrunc(N0.getOperand(0), DL, VT);
      AddToWorklist(Op.getNode());
      SDValue And = DAG.getZeroExtendInReg(Op, DL, MinVT);
      // We may safely transfer the debug info describing the truncate node over
      // to the equivalent and operation.
      DAG.transferDbgValues(N0, And);
      return And;
    }
  }

  // Fold (zext (and (trunc x), cst)) -> (and x, cst),
  // if either of the casts is not free.
  if (N0.getOpcode() == ISD::AND &&
      N0.getOperand(0).getOpcode() == ISD::TRUNCATE &&
      N0.getOperand(1).getOpcode() == ISD::Constant &&
      (!TLI.isTruncateFree(N0.getOperand(0).getOperand(0), N0.getValueType()) ||
       !TLI.isZExtFree(N0.getValueType(), VT))) {
    SDValue X = N0.getOperand(0).getOperand(0);
    X = DAG.getAnyExtOrTrunc(X, SDLoc(X), VT);
    APInt Mask = N0.getConstantOperandAPInt(1).zext(VT.getSizeInBits());
    return DAG.getNode(ISD::AND, DL, VT,
                       X, DAG.getConstant(Mask, DL, VT));
  }

  // Try to simplify (zext (load x)).
  if (SDValue foldedExt = tryToFoldExtOfLoad(
          DAG, *this, TLI, VT, LegalOperations, N, N0, ISD::ZEXTLOAD,
          ISD::ZERO_EXTEND, N->getFlags().hasNonNeg()))
    return foldedExt;

  if (SDValue foldedExt =
          tryToFoldExtOfMaskedLoad(DAG, TLI, VT, LegalOperations, N, N0,
                                   ISD::ZEXTLOAD, ISD::ZERO_EXTEND))
    return foldedExt;

  // fold (zext (load x)) to multiple smaller zextloads.
  // Only on illegal but splittable vectors.
  if (SDValue ExtLoad = CombineExtLoad(N))
    return ExtLoad;

  // Try to simplify (zext (atomic_load x)).
  if (SDValue foldedExt =
          tryToFoldExtOfAtomicLoad(DAG, TLI, VT, N0, ISD::ZEXTLOAD))
    return foldedExt;

  // fold (zext (and/or/xor (load x), cst)) ->
  //      (and/or/xor (zextload x), (zext cst))
  // Unless (and (load x) cst) will match as a zextload already and has
  // additional users, or the zext is already free.
  if (ISD::isBitwiseLogicOp(N0.getOpcode()) && !TLI.isZExtFree(N0, VT) &&
      isa<LoadSDNode>(N0.getOperand(0)) &&
      N0.getOperand(1).getOpcode() == ISD::Constant &&
      (!LegalOperations && TLI.isOperationLegal(N0.getOpcode(), VT))) {
    LoadSDNode *LN00 = cast<LoadSDNode>(N0.getOperand(0));
    EVT MemVT = LN00->getMemoryVT();
    if (TLI.isLoadExtLegal(ISD::ZEXTLOAD, VT, MemVT) &&
        LN00->getExtensionType() != ISD::SEXTLOAD && LN00->isUnindexed()) {
      bool DoXform = true;
      SmallVector<SDNode*, 4> SetCCs;
      if (!N0.hasOneUse()) {
        if (N0.getOpcode() == ISD::AND) {
          auto *AndC = cast<ConstantSDNode>(N0.getOperand(1));
          EVT LoadResultTy = AndC->getValueType(0);
          EVT ExtVT;
          if (isAndLoadExtLoad(AndC, LN00, LoadResultTy, ExtVT))
            DoXform = false;
        }
      }
      if (DoXform)
        DoXform = ExtendUsesToFormExtLoad(VT, N0.getNode(), N0.getOperand(0),
                                          ISD::ZERO_EXTEND, SetCCs, TLI);
      if (DoXform) {
        SDValue ExtLoad = DAG.getExtLoad(ISD::ZEXTLOAD, SDLoc(LN00), VT,
                                         LN00->getChain(), LN00->getBasePtr(),
                                         LN00->getMemoryVT(),
                                         LN00->getMemOperand());
        APInt Mask = N0.getConstantOperandAPInt(1).zext(VT.getSizeInBits());
        SDValue And = DAG.getNode(N0.getOpcode(), DL, VT,
                                  ExtLoad, DAG.getConstant(Mask, DL, VT));
        ExtendSetCCUses(SetCCs, N0.getOperand(0), ExtLoad, ISD::ZERO_EXTEND);
        bool NoReplaceTruncAnd = !N0.hasOneUse();
        bool NoReplaceTrunc = SDValue(LN00, 0).hasOneUse();
        CombineTo(N, And);
        // If N0 has multiple uses, change other uses as well.
        if (NoReplaceTruncAnd) {
          SDValue TruncAnd =
              DAG.getNode(ISD::TRUNCATE, DL, N0.getValueType(), And);
          CombineTo(N0.getNode(), TruncAnd);
        }
        if (NoReplaceTrunc) {
          DAG.ReplaceAllUsesOfValueWith(SDValue(LN00, 1), ExtLoad.getValue(1));
        } else {
          SDValue Trunc = DAG.getNode(ISD::TRUNCATE, SDLoc(LN00),
                                      LN00->getValueType(0), ExtLoad);
          CombineTo(LN00, Trunc, ExtLoad.getValue(1));
        }
        return SDValue(N,0); // Return N so it doesn't get rechecked!
      }
    }
  }

  // fold (zext (and/or/xor (shl/shr (load x), cst), cst)) ->
  //      (and/or/xor (shl/shr (zextload x), (zext cst)), (zext cst))
  if (SDValue ZExtLoad = CombineZExtLogicopShiftLoad(N))
    return ZExtLoad;

  // Try to simplify (zext (zextload x)).
  if (SDValue foldedExt = tryToFoldExtOfExtload(
          DAG, *this, TLI, VT, LegalOperations, N, N0, ISD::ZEXTLOAD))
    return foldedExt;

  if (SDValue V = foldExtendedSignBitTest(N, DAG, LegalOperations))
    return V;

  if (N0.getOpcode() == ISD::SETCC) {
    // Propagate fast-math-flags.
    SelectionDAG::FlagInserter FlagsInserter(DAG, N0->getFlags());

    // Only do this before legalize for now.
    if (!LegalOperations && VT.isVector() &&
        N0.getValueType().getVectorElementType() == MVT::i1) {
      EVT N00VT = N0.getOperand(0).getValueType();
      if (getSetCCResultType(N00VT) == N0.getValueType())
        return SDValue();

      // We know that the # elements of the results is the same as the #
      // elements of the compare (and the # elements of the compare result for
      // that matter). Check to see that they are the same size. If so, we know
      // that the element size of the sext'd result matches the element size of
      // the compare operands.
      if (VT.getSizeInBits() == N00VT.getSizeInBits()) {
        // zext(setcc) -> zext_in_reg(vsetcc) for vectors.
        SDValue VSetCC = DAG.getNode(ISD::SETCC, DL, VT, N0.getOperand(0),
                                     N0.getOperand(1), N0.getOperand(2));
        return DAG.getZeroExtendInReg(VSetCC, DL, N0.getValueType());
      }

      // If the desired elements are smaller or larger than the source
      // elements we can use a matching integer vector type and then
      // truncate/any extend followed by zext_in_reg.
      EVT MatchingVectorType = N00VT.changeVectorElementTypeToInteger();
      SDValue VsetCC =
          DAG.getNode(ISD::SETCC, DL, MatchingVectorType, N0.getOperand(0),
                      N0.getOperand(1), N0.getOperand(2));
      return DAG.getZeroExtendInReg(DAG.getAnyExtOrTrunc(VsetCC, DL, VT), DL,
                                    N0.getValueType());
    }

    // zext(setcc x,y,cc) -> zext(select x, y, true, false, cc)
    EVT N0VT = N0.getValueType();
    EVT N00VT = N0.getOperand(0).getValueType();
    if (SDValue SCC = SimplifySelectCC(
            DL, N0.getOperand(0), N0.getOperand(1),
            DAG.getBoolConstant(true, DL, N0VT, N00VT),
            DAG.getBoolConstant(false, DL, N0VT, N00VT),
            cast<CondCodeSDNode>(N0.getOperand(2))->get(), true))
      return DAG.getNode(ISD::ZERO_EXTEND, DL, VT, SCC);
  }

  // (zext (shl (zext x), cst)) -> (shl (zext x), cst)
  if ((N0.getOpcode() == ISD::SHL || N0.getOpcode() == ISD::SRL) &&
      !TLI.isZExtFree(N0, VT)) {
    SDValue ShVal = N0.getOperand(0);
    SDValue ShAmt = N0.getOperand(1);
    if (auto *ShAmtC = dyn_cast<ConstantSDNode>(ShAmt)) {
      if (ShVal.getOpcode() == ISD::ZERO_EXTEND && N0.hasOneUse()) {
        if (N0.getOpcode() == ISD::SHL) {
          // If the original shl may be shifting out bits, do not perform this
          // transformation.
          unsigned KnownZeroBits = ShVal.getValueSizeInBits() -
                                   ShVal.getOperand(0).getValueSizeInBits();
          if (ShAmtC->getAPIntValue().ugt(KnownZeroBits)) {
            // If the shift is too large, then see if we can deduce that the
            // shift is safe anyway.

            // Check if the bits being shifted out are known to be zero.
            KnownBits KnownShVal = DAG.computeKnownBits(ShVal);
            if (ShAmtC->getAPIntValue().ugt(KnownShVal.countMinLeadingZeros()))
              return SDValue();
          }
        }

        // Ensure that the shift amount is wide enough for the shifted value.
        if (Log2_32_Ceil(VT.getSizeInBits()) > ShAmt.getValueSizeInBits())
          ShAmt = DAG.getNode(ISD::ZERO_EXTEND, DL, MVT::i32, ShAmt);

        return DAG.getNode(N0.getOpcode(), DL, VT,
                           DAG.getNode(ISD::ZERO_EXTEND, DL, VT, ShVal), ShAmt);
      }
    }
  }

  if (SDValue NewVSel = matchVSelectOpSizesWithSetCC(N))
    return NewVSel;

  if (SDValue NewCtPop = widenCtPop(N, DAG, DL))
    return NewCtPop;

  if (SDValue V = widenAbs(N, DAG))
    return V;

  if (SDValue Res = tryToFoldExtendSelectLoad(N, TLI, DAG, DL, Level))
    return Res;

  // CSE zext nneg with sext if the zext is not free.
  if (N->getFlags().hasNonNeg() && !TLI.isZExtFree(N0.getValueType(), VT)) {
    SDNode *CSENode = DAG.getNodeIfExists(ISD::SIGN_EXTEND, N->getVTList(), N0);
    if (CSENode)
      return SDValue(CSENode, 0);
  }

  return SDValue();
}

SDValue DAGCombiner::visitANY_EXTEND(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // aext(undef) = undef
  if (N0.isUndef())
    return DAG.getUNDEF(VT);

  if (SDValue Res = tryToFoldExtendOfConstant(N, DL, TLI, DAG, LegalTypes))
    return Res;

  // fold (aext (aext x)) -> (aext x)
  // fold (aext (zext x)) -> (zext x)
  // fold (aext (sext x)) -> (sext x)
  if (N0.getOpcode() == ISD::ANY_EXTEND || N0.getOpcode() == ISD::ZERO_EXTEND ||
      N0.getOpcode() == ISD::SIGN_EXTEND) {
    SDNodeFlags Flags;
    if (N0.getOpcode() == ISD::ZERO_EXTEND)
      Flags.setNonNeg(N0->getFlags().hasNonNeg());
    return DAG.getNode(N0.getOpcode(), DL, VT, N0.getOperand(0), Flags);
  }

  // fold (aext (aext_extend_vector_inreg x)) -> (aext_extend_vector_inreg x)
  // fold (aext (zext_extend_vector_inreg x)) -> (zext_extend_vector_inreg x)
  // fold (aext (sext_extend_vector_inreg x)) -> (sext_extend_vector_inreg x)
  if (N0.getOpcode() == ISD::ANY_EXTEND_VECTOR_INREG ||
      N0.getOpcode() == ISD::ZERO_EXTEND_VECTOR_INREG ||
      N0.getOpcode() == ISD::SIGN_EXTEND_VECTOR_INREG)
    return DAG.getNode(N0.getOpcode(), DL, VT, N0.getOperand(0));

  // fold (aext (truncate (load x))) -> (aext (smaller load x))
  // fold (aext (truncate (srl (load x), c))) -> (aext (small load (x+c/n)))
  if (N0.getOpcode() == ISD::TRUNCATE) {
    if (SDValue NarrowLoad = reduceLoadWidth(N0.getNode())) {
      SDNode *oye = N0.getOperand(0).getNode();
      if (NarrowLoad.getNode() != N0.getNode()) {
        CombineTo(N0.getNode(), NarrowLoad);
        // CombineTo deleted the truncate, if needed, but not what's under it.
        AddToWorklist(oye);
      }
      return SDValue(N, 0);   // Return N so it doesn't get rechecked!
    }
  }

  // fold (aext (truncate x))
  if (N0.getOpcode() == ISD::TRUNCATE)
    return DAG.getAnyExtOrTrunc(N0.getOperand(0), DL, VT);

  // Fold (aext (and (trunc x), cst)) -> (and x, cst)
  // if the trunc is not free.
  if (N0.getOpcode() == ISD::AND &&
      N0.getOperand(0).getOpcode() == ISD::TRUNCATE &&
      N0.getOperand(1).getOpcode() == ISD::Constant &&
      !TLI.isTruncateFree(N0.getOperand(0).getOperand(0), N0.getValueType())) {
    SDValue X = DAG.getAnyExtOrTrunc(N0.getOperand(0).getOperand(0), DL, VT);
    SDValue Y = DAG.getNode(ISD::ANY_EXTEND, DL, VT, N0.getOperand(1));
    assert(isa<ConstantSDNode>(Y) && "Expected constant to be folded!");
    return DAG.getNode(ISD::AND, DL, VT, X, Y);
  }

  // fold (aext (load x)) -> (aext (truncate (extload x)))
  // None of the supported targets knows how to perform load and any_ext
  // on vectors in one instruction, so attempt to fold to zext instead.
  if (VT.isVector()) {
    // Try to simplify (zext (load x)).
    if (SDValue foldedExt =
            tryToFoldExtOfLoad(DAG, *this, TLI, VT, LegalOperations, N, N0,
                               ISD::ZEXTLOAD, ISD::ZERO_EXTEND))
      return foldedExt;
  } else if (ISD::isNON_EXTLoad(N0.getNode()) &&
             ISD::isUNINDEXEDLoad(N0.getNode()) &&
             TLI.isLoadExtLegal(ISD::EXTLOAD, VT, N0.getValueType())) {
    bool DoXform = true;
    SmallVector<SDNode *, 4> SetCCs;
    if (!N0.hasOneUse())
      DoXform =
          ExtendUsesToFormExtLoad(VT, N, N0, ISD::ANY_EXTEND, SetCCs, TLI);
    if (DoXform) {
      LoadSDNode *LN0 = cast<LoadSDNode>(N0);
      SDValue ExtLoad = DAG.getExtLoad(ISD::EXTLOAD, DL, VT, LN0->getChain(),
                                       LN0->getBasePtr(), N0.getValueType(),
                                       LN0->getMemOperand());
      ExtendSetCCUses(SetCCs, N0, ExtLoad, ISD::ANY_EXTEND);
      // If the load value is used only by N, replace it via CombineTo N.
      bool NoReplaceTrunc = N0.hasOneUse();
      CombineTo(N, ExtLoad);
      if (NoReplaceTrunc) {
        DAG.ReplaceAllUsesOfValueWith(SDValue(LN0, 1), ExtLoad.getValue(1));
        recursivelyDeleteUnusedNodes(LN0);
      } else {
        SDValue Trunc =
            DAG.getNode(ISD::TRUNCATE, SDLoc(N0), N0.getValueType(), ExtLoad);
        CombineTo(LN0, Trunc, ExtLoad.getValue(1));
      }
      return SDValue(N, 0); // Return N so it doesn't get rechecked!
    }
  }

  // fold (aext (zextload x)) -> (aext (truncate (zextload x)))
  // fold (aext (sextload x)) -> (aext (truncate (sextload x)))
  // fold (aext ( extload x)) -> (aext (truncate (extload  x)))
  if (N0.getOpcode() == ISD::LOAD && !ISD::isNON_EXTLoad(N0.getNode()) &&
      ISD::isUNINDEXEDLoad(N0.getNode()) && N0.hasOneUse()) {
    LoadSDNode *LN0 = cast<LoadSDNode>(N0);
    ISD::LoadExtType ExtType = LN0->getExtensionType();
    EVT MemVT = LN0->getMemoryVT();
    if (!LegalOperations || TLI.isLoadExtLegal(ExtType, VT, MemVT)) {
      SDValue ExtLoad =
          DAG.getExtLoad(ExtType, DL, VT, LN0->getChain(), LN0->getBasePtr(),
                         MemVT, LN0->getMemOperand());
      CombineTo(N, ExtLoad);
      DAG.ReplaceAllUsesOfValueWith(SDValue(LN0, 1), ExtLoad.getValue(1));
      recursivelyDeleteUnusedNodes(LN0);
      return SDValue(N, 0);   // Return N so it doesn't get rechecked!
    }
  }

  if (N0.getOpcode() == ISD::SETCC) {
    // Propagate fast-math-flags.
    SelectionDAG::FlagInserter FlagsInserter(DAG, N0->getFlags());

    // For vectors:
    // aext(setcc) -> vsetcc
    // aext(setcc) -> truncate(vsetcc)
    // aext(setcc) -> aext(vsetcc)
    // Only do this before legalize for now.
    if (VT.isVector() && !LegalOperations) {
      EVT N00VT = N0.getOperand(0).getValueType();
      if (getSetCCResultType(N00VT) == N0.getValueType())
        return SDValue();

      // We know that the # elements of the results is the same as the
      // # elements of the compare (and the # elements of the compare result
      // for that matter).  Check to see that they are the same size.  If so,
      // we know that the element size of the sext'd result matches the
      // element size of the compare operands.
      if (VT.getSizeInBits() == N00VT.getSizeInBits())
        return DAG.getSetCC(DL, VT, N0.getOperand(0), N0.getOperand(1),
                            cast<CondCodeSDNode>(N0.getOperand(2))->get());

      // If the desired elements are smaller or larger than the source
      // elements we can use a matching integer vector type and then
      // truncate/any extend
      EVT MatchingVectorType = N00VT.changeVectorElementTypeToInteger();
      SDValue VsetCC = DAG.getSetCC(
          DL, MatchingVectorType, N0.getOperand(0), N0.getOperand(1),
          cast<CondCodeSDNode>(N0.getOperand(2))->get());
      return DAG.getAnyExtOrTrunc(VsetCC, DL, VT);
    }

    // aext(setcc x,y,cc) -> select_cc x, y, 1, 0, cc
    if (SDValue SCC = SimplifySelectCC(
            DL, N0.getOperand(0), N0.getOperand(1), DAG.getConstant(1, DL, VT),
            DAG.getConstant(0, DL, VT),
            cast<CondCodeSDNode>(N0.getOperand(2))->get(), true))
      return SCC;
  }

  if (SDValue NewCtPop = widenCtPop(N, DAG, DL))
    return NewCtPop;

  if (SDValue Res = tryToFoldExtendSelectLoad(N, TLI, DAG, DL, Level))
    return Res;

  return SDValue();
}

SDValue DAGCombiner::visitAssertExt(SDNode *N) {
  unsigned Opcode = N->getOpcode();
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT AssertVT = cast<VTSDNode>(N1)->getVT();

  // fold (assert?ext (assert?ext x, vt), vt) -> (assert?ext x, vt)
  if (N0.getOpcode() == Opcode &&
      AssertVT == cast<VTSDNode>(N0.getOperand(1))->getVT())
    return N0;

  if (N0.getOpcode() == ISD::TRUNCATE && N0.hasOneUse() &&
      N0.getOperand(0).getOpcode() == Opcode) {
    // We have an assert, truncate, assert sandwich. Make one stronger assert
    // by asserting on the smallest asserted type to the larger source type.
    // This eliminates the later assert:
    // assert (trunc (assert X, i8) to iN), i1 --> trunc (assert X, i1) to iN
    // assert (trunc (assert X, i1) to iN), i8 --> trunc (assert X, i1) to iN
    SDLoc DL(N);
    SDValue BigA = N0.getOperand(0);
    EVT BigA_AssertVT = cast<VTSDNode>(BigA.getOperand(1))->getVT();
    EVT MinAssertVT = AssertVT.bitsLT(BigA_AssertVT) ? AssertVT : BigA_AssertVT;
    SDValue MinAssertVTVal = DAG.getValueType(MinAssertVT);
    SDValue NewAssert = DAG.getNode(Opcode, DL, BigA.getValueType(),
                                    BigA.getOperand(0), MinAssertVTVal);
    return DAG.getNode(ISD::TRUNCATE, DL, N->getValueType(0), NewAssert);
  }

  // If we have (AssertZext (truncate (AssertSext X, iX)), iY) and Y is smaller
  // than X. Just move the AssertZext in front of the truncate and drop the
  // AssertSExt.
  if (N0.getOpcode() == ISD::TRUNCATE && N0.hasOneUse() &&
      N0.getOperand(0).getOpcode() == ISD::AssertSext &&
      Opcode == ISD::AssertZext) {
    SDValue BigA = N0.getOperand(0);
    EVT BigA_AssertVT = cast<VTSDNode>(BigA.getOperand(1))->getVT();
    if (AssertVT.bitsLT(BigA_AssertVT)) {
      SDLoc DL(N);
      SDValue NewAssert = DAG.getNode(Opcode, DL, BigA.getValueType(),
                                      BigA.getOperand(0), N1);
      return DAG.getNode(ISD::TRUNCATE, DL, N->getValueType(0), NewAssert);
    }
  }

  return SDValue();
}

SDValue DAGCombiner::visitAssertAlign(SDNode *N) {
  SDLoc DL(N);

  Align AL = cast<AssertAlignSDNode>(N)->getAlign();
  SDValue N0 = N->getOperand(0);

  // Fold (assertalign (assertalign x, AL0), AL1) ->
  // (assertalign x, max(AL0, AL1))
  if (auto *AAN = dyn_cast<AssertAlignSDNode>(N0))
    return DAG.getAssertAlign(DL, N0.getOperand(0),
                              std::max(AL, AAN->getAlign()));

  // In rare cases, there are trivial arithmetic ops in source operands. Sink
  // this assert down to source operands so that those arithmetic ops could be
  // exposed to the DAG combining.
  switch (N0.getOpcode()) {
  default:
    break;
  case ISD::ADD:
  case ISD::SUB: {
    unsigned AlignShift = Log2(AL);
    SDValue LHS = N0.getOperand(0);
    SDValue RHS = N0.getOperand(1);
    unsigned LHSAlignShift = DAG.computeKnownBits(LHS).countMinTrailingZeros();
    unsigned RHSAlignShift = DAG.computeKnownBits(RHS).countMinTrailingZeros();
    if (LHSAlignShift >= AlignShift || RHSAlignShift >= AlignShift) {
      if (LHSAlignShift < AlignShift)
        LHS = DAG.getAssertAlign(DL, LHS, AL);
      if (RHSAlignShift < AlignShift)
        RHS = DAG.getAssertAlign(DL, RHS, AL);
      return DAG.getNode(N0.getOpcode(), DL, N0.getValueType(), LHS, RHS);
    }
    break;
  }
  }

  return SDValue();
}

/// If the result of a load is shifted/masked/truncated to an effectively
/// narrower type, try to transform the load to a narrower type and/or
/// use an extending load.
SDValue DAGCombiner::reduceLoadWidth(SDNode *N) {
  unsigned Opc = N->getOpcode();

  ISD::LoadExtType ExtType = ISD::NON_EXTLOAD;
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  EVT ExtVT = VT;

  // This transformation isn't valid for vector loads.
  if (VT.isVector())
    return SDValue();

  // The ShAmt variable is used to indicate that we've consumed a right
  // shift. I.e. we want to narrow the width of the load by skipping to load the
  // ShAmt least significant bits.
  unsigned ShAmt = 0;
  // A special case is when the least significant bits from the load are masked
  // away, but using an AND rather than a right shift. HasShiftedOffset is used
  // to indicate that the narrowed load should be left-shifted ShAmt bits to get
  // the result.
  unsigned ShiftedOffset = 0;
  // Special case: SIGN_EXTEND_INREG is basically truncating to ExtVT then
  // extended to VT.
  if (Opc == ISD::SIGN_EXTEND_INREG) {
    ExtType = ISD::SEXTLOAD;
    ExtVT = cast<VTSDNode>(N->getOperand(1))->getVT();
  } else if (Opc == ISD::SRL || Opc == ISD::SRA) {
    // Another special-case: SRL/SRA is basically zero/sign-extending a narrower
    // value, or it may be shifting a higher subword, half or byte into the
    // lowest bits.

    // Only handle shift with constant shift amount, and the shiftee must be a
    // load.
    auto *LN = dyn_cast<LoadSDNode>(N0);
    auto *N1C = dyn_cast<ConstantSDNode>(N->getOperand(1));
    if (!N1C || !LN)
      return SDValue();
    // If the shift amount is larger than the memory type then we're not
    // accessing any of the loaded bytes.
    ShAmt = N1C->getZExtValue();
    uint64_t MemoryWidth = LN->getMemoryVT().getScalarSizeInBits();
    if (MemoryWidth <= ShAmt)
      return SDValue();
    // Attempt to fold away the SRL by using ZEXTLOAD and SRA by using SEXTLOAD.
    ExtType = Opc == ISD::SRL ? ISD::ZEXTLOAD : ISD::SEXTLOAD;
    ExtVT = EVT::getIntegerVT(*DAG.getContext(), MemoryWidth - ShAmt);
    // If original load is a SEXTLOAD then we can't simply replace it by a
    // ZEXTLOAD (we could potentially replace it by a more narrow SEXTLOAD
    // followed by a ZEXT, but that is not handled at the moment). Similarly if
    // the original load is a ZEXTLOAD and we want to use a SEXTLOAD.
    if ((LN->getExtensionType() == ISD::SEXTLOAD ||
         LN->getExtensionType() == ISD::ZEXTLOAD) &&
        LN->getExtensionType() != ExtType)
      return SDValue();
  } else if (Opc == ISD::AND) {
    // An AND with a constant mask is the same as a truncate + zero-extend.
    auto AndC = dyn_cast<ConstantSDNode>(N->getOperand(1));
    if (!AndC)
      return SDValue();

    const APInt &Mask = AndC->getAPIntValue();
    unsigned ActiveBits = 0;
    if (Mask.isMask()) {
      ActiveBits = Mask.countr_one();
    } else if (Mask.isShiftedMask(ShAmt, ActiveBits)) {
      ShiftedOffset = ShAmt;
    } else {
      return SDValue();
    }

    ExtType = ISD::ZEXTLOAD;
    ExtVT = EVT::getIntegerVT(*DAG.getContext(), ActiveBits);
  }

  // In case Opc==SRL we've already prepared ExtVT/ExtType/ShAmt based on doing
  // a right shift. Here we redo some of those checks, to possibly adjust the
  // ExtVT even further based on "a masking AND". We could also end up here for
  // other reasons (e.g. based on Opc==TRUNCATE) and that is why some checks
  // need to be done here as well.
  if (Opc == ISD::SRL || N0.getOpcode() == ISD::SRL) {
    SDValue SRL = Opc == ISD::SRL ? SDValue(N, 0) : N0;
    // Bail out when the SRL has more than one use. This is done for historical
    // (undocumented) reasons. Maybe intent was to guard the AND-masking below
    // check below? And maybe it could be non-profitable to do the transform in
    // case the SRL has multiple uses and we get here with Opc!=ISD::SRL?
    // FIXME: Can't we just skip this check for the Opc==ISD::SRL case.
    if (!SRL.hasOneUse())
      return SDValue();

    // Only handle shift with constant shift amount, and the shiftee must be a
    // load.
    auto *LN = dyn_cast<LoadSDNode>(SRL.getOperand(0));
    auto *SRL1C = dyn_cast<ConstantSDNode>(SRL.getOperand(1));
    if (!SRL1C || !LN)
      return SDValue();

    // If the shift amount is larger than the input type then we're not
    // accessing any of the loaded bytes.  If the load was a zextload/extload
    // then the result of the shift+trunc is zero/undef (handled elsewhere).
    ShAmt = SRL1C->getZExtValue();
    uint64_t MemoryWidth = LN->getMemoryVT().getSizeInBits();
    if (ShAmt >= MemoryWidth)
      return SDValue();

    // Because a SRL must be assumed to *need* to zero-extend the high bits
    // (as opposed to anyext the high bits), we can't combine the zextload
    // lowering of SRL and an sextload.
    if (LN->getExtensionType() == ISD::SEXTLOAD)
      return SDValue();

    // Avoid reading outside the memory accessed by the original load (could
    // happened if we only adjust the load base pointer by ShAmt). Instead we
    // try to narrow the load even further. The typical scenario here is:
    //   (i64 (truncate (i96 (srl (load x), 64)))) ->
    //     (i64 (truncate (i96 (zextload (load i32 + offset) from i32))))
    if (ExtVT.getScalarSizeInBits() > MemoryWidth - ShAmt) {
      // Don't replace sextload by zextload.
      if (ExtType == ISD::SEXTLOAD)
        return SDValue();
      // Narrow the load.
      ExtType = ISD::ZEXTLOAD;
      ExtVT = EVT::getIntegerVT(*DAG.getContext(), MemoryWidth - ShAmt);
    }

    // If the SRL is only used by a masking AND, we may be able to adjust
    // the ExtVT to make the AND redundant.
    SDNode *Mask = *(SRL->use_begin());
    if (SRL.hasOneUse() && Mask->getOpcode() == ISD::AND &&
        isa<ConstantSDNode>(Mask->getOperand(1))) {
      unsigned Offset, ActiveBits;
      const APInt& ShiftMask = Mask->getConstantOperandAPInt(1);
      if (ShiftMask.isMask()) {
        EVT MaskedVT =
            EVT::getIntegerVT(*DAG.getContext(), ShiftMask.countr_one());
        // If the mask is smaller, recompute the type.
        if ((ExtVT.getScalarSizeInBits() > MaskedVT.getScalarSizeInBits()) &&
            TLI.isLoadExtLegal(ExtType, SRL.getValueType(), MaskedVT))
          ExtVT = MaskedVT;
      } else if (ExtType == ISD::ZEXTLOAD &&
                 ShiftMask.isShiftedMask(Offset, ActiveBits) &&
                 (Offset + ShAmt) < VT.getScalarSizeInBits()) {
        EVT MaskedVT = EVT::getIntegerVT(*DAG.getContext(), ActiveBits);
        // If the mask is shifted we can use a narrower load and a shl to insert
        // the trailing zeros.
        if (((Offset + ActiveBits) <= ExtVT.getScalarSizeInBits()) &&
            TLI.isLoadExtLegal(ExtType, SRL.getValueType(), MaskedVT)) {
          ExtVT = MaskedVT;
          ShAmt = Offset + ShAmt;
          ShiftedOffset = Offset;
        }
      }
    }

    N0 = SRL.getOperand(0);
  }

  // If the load is shifted left (and the result isn't shifted back right), we
  // can fold a truncate through the shift. The typical scenario is that N
  // points at a TRUNCATE here so the attempted fold is:
  //   (truncate (shl (load x), c))) -> (shl (narrow load x), c)
  // ShLeftAmt will indicate how much a narrowed load should be shifted left.
  unsigned ShLeftAmt = 0;
  if (ShAmt == 0 && N0.getOpcode() == ISD::SHL && N0.hasOneUse() &&
      ExtVT == VT && TLI.isNarrowingProfitable(N, N0.getValueType(), VT)) {
    if (ConstantSDNode *N01 = dyn_cast<ConstantSDNode>(N0.getOperand(1))) {
      ShLeftAmt = N01->getZExtValue();
      N0 = N0.getOperand(0);
    }
  }

  // If we haven't found a load, we can't narrow it.
  if (!isa<LoadSDNode>(N0))
    return SDValue();

  LoadSDNode *LN0 = cast<LoadSDNode>(N0);
  // Reducing the width of a volatile load is illegal.  For atomics, we may be
  // able to reduce the width provided we never widen again. (see D66309)
  if (!LN0->isSimple() ||
      !isLegalNarrowLdSt(LN0, ExtType, ExtVT, ShAmt))
    return SDValue();

  auto AdjustBigEndianShift = [&](unsigned ShAmt) {
    unsigned LVTStoreBits =
        LN0->getMemoryVT().getStoreSizeInBits().getFixedValue();
    unsigned EVTStoreBits = ExtVT.getStoreSizeInBits().getFixedValue();
    return LVTStoreBits - EVTStoreBits - ShAmt;
  };

  // We need to adjust the pointer to the load by ShAmt bits in order to load
  // the correct bytes.
  unsigned PtrAdjustmentInBits =
      DAG.getDataLayout().isBigEndian() ? AdjustBigEndianShift(ShAmt) : ShAmt;

  uint64_t PtrOff = PtrAdjustmentInBits / 8;
  SDLoc DL(LN0);
  // The original load itself didn't wrap, so an offset within it doesn't.
  SDValue NewPtr =
      DAG.getMemBasePlusOffset(LN0->getBasePtr(), TypeSize::getFixed(PtrOff),
                               DL, SDNodeFlags::NoUnsignedWrap);
  AddToWorklist(NewPtr.getNode());

  SDValue Load;
  if (ExtType == ISD::NON_EXTLOAD)
    Load = DAG.getLoad(VT, DL, LN0->getChain(), NewPtr,
                       LN0->getPointerInfo().getWithOffset(PtrOff),
                       LN0->getOriginalAlign(),
                       LN0->getMemOperand()->getFlags(), LN0->getAAInfo());
  else
    Load = DAG.getExtLoad(ExtType, DL, VT, LN0->getChain(), NewPtr,
                          LN0->getPointerInfo().getWithOffset(PtrOff), ExtVT,
                          LN0->getOriginalAlign(),
                          LN0->getMemOperand()->getFlags(), LN0->getAAInfo());

  // Replace the old load's chain with the new load's chain.
  WorklistRemover DeadNodes(*this);
  DAG.ReplaceAllUsesOfValueWith(N0.getValue(1), Load.getValue(1));

  // Shift the result left, if we've swallowed a left shift.
  SDValue Result = Load;
  if (ShLeftAmt != 0) {
    // If the shift amount is as large as the result size (but, presumably,
    // no larger than the source) then the useful bits of the result are
    // zero; we can't simply return the shortened shift, because the result
    // of that operation is undefined.
    if (ShLeftAmt >= VT.getScalarSizeInBits())
      Result = DAG.getConstant(0, DL, VT);
    else
      Result = DAG.getNode(ISD::SHL, DL, VT, Result,
                           DAG.getShiftAmountConstant(ShLeftAmt, VT, DL));
  }

  if (ShiftedOffset != 0) {
    // We're using a shifted mask, so the load now has an offset. This means
    // that data has been loaded into the lower bytes than it would have been
    // before, so we need to shl the loaded data into the correct position in the
    // register.
    SDValue ShiftC = DAG.getConstant(ShiftedOffset, DL, VT);
    Result = DAG.getNode(ISD::SHL, DL, VT, Result, ShiftC);
    DAG.ReplaceAllUsesOfValueWith(SDValue(N, 0), Result);
  }

  // Return the new loaded value.
  return Result;
}

SDValue DAGCombiner::visitSIGN_EXTEND_INREG(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  EVT ExtVT = cast<VTSDNode>(N1)->getVT();
  unsigned VTBits = VT.getScalarSizeInBits();
  unsigned ExtVTBits = ExtVT.getScalarSizeInBits();
  SDLoc DL(N);

  // sext_vector_inreg(undef) = 0 because the top bit will all be the same.
  if (N0.isUndef())
    return DAG.getConstant(0, DL, VT);

  // fold (sext_in_reg c1) -> c1
  if (SDValue C =
          DAG.FoldConstantArithmetic(ISD::SIGN_EXTEND_INREG, DL, VT, {N0, N1}))
    return C;

  // If the input is already sign extended, just drop the extension.
  if (ExtVTBits >= DAG.ComputeMaxSignificantBits(N0))
    return N0;

  // fold (sext_in_reg (sext_in_reg x, VT2), VT1) -> (sext_in_reg x, minVT) pt2
  if (N0.getOpcode() == ISD::SIGN_EXTEND_INREG &&
      ExtVT.bitsLT(cast<VTSDNode>(N0.getOperand(1))->getVT()))
    return DAG.getNode(ISD::SIGN_EXTEND_INREG, DL, VT, N0.getOperand(0), N1);

  // fold (sext_in_reg (sext x)) -> (sext x)
  // fold (sext_in_reg (aext x)) -> (sext x)
  // if x is small enough or if we know that x has more than 1 sign bit and the
  // sign_extend_inreg is extending from one of them.
  if (N0.getOpcode() == ISD::SIGN_EXTEND || N0.getOpcode() == ISD::ANY_EXTEND) {
    SDValue N00 = N0.getOperand(0);
    unsigned N00Bits = N00.getScalarValueSizeInBits();
    if ((N00Bits <= ExtVTBits ||
         DAG.ComputeMaxSignificantBits(N00) <= ExtVTBits) &&
        (!LegalOperations || TLI.isOperationLegal(ISD::SIGN_EXTEND, VT)))
      return DAG.getNode(ISD::SIGN_EXTEND, DL, VT, N00);
  }

  // fold (sext_in_reg (*_extend_vector_inreg x)) -> (sext_vector_inreg x)
  // if x is small enough or if we know that x has more than 1 sign bit and the
  // sign_extend_inreg is extending from one of them.
  if (ISD::isExtVecInRegOpcode(N0.getOpcode())) {
    SDValue N00 = N0.getOperand(0);
    unsigned N00Bits = N00.getScalarValueSizeInBits();
    unsigned DstElts = N0.getValueType().getVectorMinNumElements();
    unsigned SrcElts = N00.getValueType().getVectorMinNumElements();
    bool IsZext = N0.getOpcode() == ISD::ZERO_EXTEND_VECTOR_INREG;
    APInt DemandedSrcElts = APInt::getLowBitsSet(SrcElts, DstElts);
    if ((N00Bits == ExtVTBits ||
         (!IsZext && (N00Bits < ExtVTBits ||
                      DAG.ComputeMaxSignificantBits(N00) <= ExtVTBits))) &&
        (!LegalOperations ||
         TLI.isOperationLegal(ISD::SIGN_EXTEND_VECTOR_INREG, VT)))
      return DAG.getNode(ISD::SIGN_EXTEND_VECTOR_INREG, DL, VT, N00);
  }

  // fold (sext_in_reg (zext x)) -> (sext x)
  // iff we are extending the source sign bit.
  if (N0.getOpcode() == ISD::ZERO_EXTEND) {
    SDValue N00 = N0.getOperand(0);
    if (N00.getScalarValueSizeInBits() == ExtVTBits &&
        (!LegalOperations || TLI.isOperationLegal(ISD::SIGN_EXTEND, VT)))
      return DAG.getNode(ISD::SIGN_EXTEND, DL, VT, N00);
  }

  // fold (sext_in_reg x) -> (zext_in_reg x) if the sign bit is known zero.
  if (DAG.MaskedValueIsZero(N0, APInt::getOneBitSet(VTBits, ExtVTBits - 1)))
    return DAG.getZeroExtendInReg(N0, DL, ExtVT);

  // fold operands of sext_in_reg based on knowledge that the top bits are not
  // demanded.
  if (SimplifyDemandedBits(SDValue(N, 0)))
    return SDValue(N, 0);

  // fold (sext_in_reg (load x)) -> (smaller sextload x)
  // fold (sext_in_reg (srl (load x), c)) -> (smaller sextload (x+c/evtbits))
  if (SDValue NarrowLoad = reduceLoadWidth(N))
    return NarrowLoad;

  // fold (sext_in_reg (srl X, 24), i8) -> (sra X, 24)
  // fold (sext_in_reg (srl X, 23), i8) -> (sra X, 23) iff possible.
  // We already fold "(sext_in_reg (srl X, 25), i8) -> srl X, 25" above.
  if (N0.getOpcode() == ISD::SRL) {
    if (auto *ShAmt = dyn_cast<ConstantSDNode>(N0.getOperand(1)))
      if (ShAmt->getAPIntValue().ule(VTBits - ExtVTBits)) {
        // We can turn this into an SRA iff the input to the SRL is already sign
        // extended enough.
        unsigned InSignBits = DAG.ComputeNumSignBits(N0.getOperand(0));
        if (((VTBits - ExtVTBits) - ShAmt->getZExtValue()) < InSignBits)
          return DAG.getNode(ISD::SRA, DL, VT, N0.getOperand(0),
                             N0.getOperand(1));
      }
  }

  // fold (sext_inreg (extload x)) -> (sextload x)
  // If sextload is not supported by target, we can only do the combine when
  // load has one use. Doing otherwise can block folding the extload with other
  // extends that the target does support.
  if (ISD::isEXTLoad(N0.getNode()) && ISD::isUNINDEXEDLoad(N0.getNode()) &&
      ExtVT == cast<LoadSDNode>(N0)->getMemoryVT() &&
      ((!LegalOperations && cast<LoadSDNode>(N0)->isSimple() &&
        N0.hasOneUse()) ||
       TLI.isLoadExtLegal(ISD::SEXTLOAD, VT, ExtVT))) {
    auto *LN0 = cast<LoadSDNode>(N0);
    SDValue ExtLoad =
        DAG.getExtLoad(ISD::SEXTLOAD, DL, VT, LN0->getChain(),
                       LN0->getBasePtr(), ExtVT, LN0->getMemOperand());
    CombineTo(N, ExtLoad);
    CombineTo(N0.getNode(), ExtLoad, ExtLoad.getValue(1));
    AddToWorklist(ExtLoad.getNode());
    return SDValue(N, 0); // Return N so it doesn't get rechecked!
  }

  // fold (sext_inreg (zextload x)) -> (sextload x) iff load has one use
  if (ISD::isZEXTLoad(N0.getNode()) && ISD::isUNINDEXEDLoad(N0.getNode()) &&
      N0.hasOneUse() && ExtVT == cast<LoadSDNode>(N0)->getMemoryVT() &&
      ((!LegalOperations && cast<LoadSDNode>(N0)->isSimple()) &&
       TLI.isLoadExtLegal(ISD::SEXTLOAD, VT, ExtVT))) {
    auto *LN0 = cast<LoadSDNode>(N0);
    SDValue ExtLoad =
        DAG.getExtLoad(ISD::SEXTLOAD, DL, VT, LN0->getChain(),
                       LN0->getBasePtr(), ExtVT, LN0->getMemOperand());
    CombineTo(N, ExtLoad);
    CombineTo(N0.getNode(), ExtLoad, ExtLoad.getValue(1));
    return SDValue(N, 0); // Return N so it doesn't get rechecked!
  }

  // fold (sext_inreg (masked_load x)) -> (sext_masked_load x)
  // ignore it if the masked load is already sign extended
  if (MaskedLoadSDNode *Ld = dyn_cast<MaskedLoadSDNode>(N0)) {
    if (ExtVT == Ld->getMemoryVT() && N0.hasOneUse() &&
        Ld->getExtensionType() != ISD::LoadExtType::NON_EXTLOAD &&
        TLI.isLoadExtLegal(ISD::SEXTLOAD, VT, ExtVT)) {
      SDValue ExtMaskedLoad = DAG.getMaskedLoad(
          VT, DL, Ld->getChain(), Ld->getBasePtr(), Ld->getOffset(),
          Ld->getMask(), Ld->getPassThru(), ExtVT, Ld->getMemOperand(),
          Ld->getAddressingMode(), ISD::SEXTLOAD, Ld->isExpandingLoad());
      CombineTo(N, ExtMaskedLoad);
      CombineTo(N0.getNode(), ExtMaskedLoad, ExtMaskedLoad.getValue(1));
      return SDValue(N, 0); // Return N so it doesn't get rechecked!
    }
  }

  // fold (sext_inreg (masked_gather x)) -> (sext_masked_gather x)
  if (auto *GN0 = dyn_cast<MaskedGatherSDNode>(N0)) {
    if (SDValue(GN0, 0).hasOneUse() && ExtVT == GN0->getMemoryVT() &&
        TLI.isVectorLoadExtDesirable(SDValue(SDValue(GN0, 0)))) {
      SDValue Ops[] = {GN0->getChain(),   GN0->getPassThru(), GN0->getMask(),
                       GN0->getBasePtr(), GN0->getIndex(),    GN0->getScale()};

      SDValue ExtLoad = DAG.getMaskedGather(
          DAG.getVTList(VT, MVT::Other), ExtVT, DL, Ops, GN0->getMemOperand(),
          GN0->getIndexType(), ISD::SEXTLOAD);

      CombineTo(N, ExtLoad);
      CombineTo(N0.getNode(), ExtLoad, ExtLoad.getValue(1));
      AddToWorklist(ExtLoad.getNode());
      return SDValue(N, 0); // Return N so it doesn't get rechecked!
    }
  }

  // Form (sext_inreg (bswap >> 16)) or (sext_inreg (rotl (bswap) 16))
  if (ExtVTBits <= 16 && N0.getOpcode() == ISD::OR) {
    if (SDValue BSwap = MatchBSwapHWordLow(N0.getNode(), N0.getOperand(0),
                                           N0.getOperand(1), false))
      return DAG.getNode(ISD::SIGN_EXTEND_INREG, DL, VT, BSwap, N1);
  }

  // Fold (iM_signext_inreg
  //        (extract_subvector (zext|anyext|sext iN_v to _) _)
  //        from iN)
  //      -> (extract_subvector (signext iN_v to iM))
  if (N0.getOpcode() == ISD::EXTRACT_SUBVECTOR && N0.hasOneUse() &&
      ISD::isExtOpcode(N0.getOperand(0).getOpcode())) {
    SDValue InnerExt = N0.getOperand(0);
    EVT InnerExtVT = InnerExt->getValueType(0);
    SDValue Extendee = InnerExt->getOperand(0);

    if (ExtVTBits == Extendee.getValueType().getScalarSizeInBits() &&
        (!LegalOperations ||
         TLI.isOperationLegal(ISD::SIGN_EXTEND, InnerExtVT))) {
      SDValue SignExtExtendee =
          DAG.getNode(ISD::SIGN_EXTEND, DL, InnerExtVT, Extendee);
      return DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, VT, SignExtExtendee,
                         N0.getOperand(1));
    }
  }

  return SDValue();
}

static SDValue foldExtendVectorInregToExtendOfSubvector(
    SDNode *N, const SDLoc &DL, const TargetLowering &TLI, SelectionDAG &DAG,
    bool LegalOperations) {
  unsigned InregOpcode = N->getOpcode();
  unsigned Opcode = DAG.getOpcode_EXTEND(InregOpcode);

  SDValue Src = N->getOperand(0);
  EVT VT = N->getValueType(0);
  EVT SrcVT = EVT::getVectorVT(*DAG.getContext(),
                               Src.getValueType().getVectorElementType(),
                               VT.getVectorElementCount());

  assert(ISD::isExtVecInRegOpcode(InregOpcode) &&
         "Expected EXTEND_VECTOR_INREG dag node in input!");

  // Profitability check: our operand must be an one-use CONCAT_VECTORS.
  // FIXME: one-use check may be overly restrictive
  if (!Src.hasOneUse() || Src.getOpcode() != ISD::CONCAT_VECTORS)
    return SDValue();

  // Profitability check: we must be extending exactly one of it's operands.
  // FIXME: this is probably overly restrictive.
  Src = Src.getOperand(0);
  if (Src.getValueType() != SrcVT)
    return SDValue();

  if (LegalOperations && !TLI.isOperationLegal(Opcode, VT))
    return SDValue();

  return DAG.getNode(Opcode, DL, VT, Src);
}

SDValue DAGCombiner::visitEXTEND_VECTOR_INREG(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  if (N0.isUndef()) {
    // aext_vector_inreg(undef) = undef because the top bits are undefined.
    // {s/z}ext_vector_inreg(undef) = 0 because the top bits must be the same.
    return N->getOpcode() == ISD::ANY_EXTEND_VECTOR_INREG
               ? DAG.getUNDEF(VT)
               : DAG.getConstant(0, DL, VT);
  }

  if (SDValue Res = tryToFoldExtendOfConstant(N, DL, TLI, DAG, LegalTypes))
    return Res;

  if (SimplifyDemandedVectorElts(SDValue(N, 0)))
    return SDValue(N, 0);

  if (SDValue R = foldExtendVectorInregToExtendOfSubvector(N, DL, TLI, DAG,
                                                           LegalOperations))
    return R;

  return SDValue();
}

SDValue DAGCombiner::visitTRUNCATE_USAT_U(SDNode *N) {
  EVT VT = N->getValueType(0);
  SDValue N0 = N->getOperand(0);

  SDValue FPVal;
  if (sd_match(N0, m_FPToUI(m_Value(FPVal))) &&
      DAG.getTargetLoweringInfo().shouldConvertFpToSat(
          ISD::FP_TO_UINT_SAT, FPVal.getValueType(), VT))
    return DAG.getNode(ISD::FP_TO_UINT_SAT, SDLoc(N0), VT, FPVal,
                       DAG.getValueType(VT.getScalarType()));

  return SDValue();
}

/// Detect patterns of truncation with unsigned saturation:
///
/// (truncate (umin (x, unsigned_max_of_dest_type)) to dest_type).
/// Return the source value x to be truncated or SDValue() if the pattern was
/// not matched.
///
static SDValue detectUSatUPattern(SDValue In, EVT VT) {
  unsigned NumDstBits = VT.getScalarSizeInBits();
  unsigned NumSrcBits = In.getScalarValueSizeInBits();
  // Saturation with truncation. We truncate from InVT to VT.
  assert(NumSrcBits > NumDstBits && "Unexpected types for truncate operation");

  SDValue Min;
  APInt UnsignedMax = APInt::getMaxValue(NumDstBits).zext(NumSrcBits);
  if (sd_match(In, m_UMin(m_Value(Min), m_SpecificInt(UnsignedMax))))
    return Min;

  return SDValue();
}

/// Detect patterns of truncation with signed saturation:
/// (truncate (smin (smax (x, signed_min_of_dest_type),
///                  signed_max_of_dest_type)) to dest_type)
/// or:
/// (truncate (smax (smin (x, signed_max_of_dest_type),
///                  signed_min_of_dest_type)) to dest_type).
///
/// Return the source value to be truncated or SDValue() if the pattern was not
/// matched.
static SDValue detectSSatSPattern(SDValue In, EVT VT) {
  unsigned NumDstBits = VT.getScalarSizeInBits();
  unsigned NumSrcBits = In.getScalarValueSizeInBits();
  // Saturation with truncation. We truncate from InVT to VT.
  assert(NumSrcBits > NumDstBits && "Unexpected types for truncate operation");

  SDValue Val;
  APInt SignedMax = APInt::getSignedMaxValue(NumDstBits).sext(NumSrcBits);
  APInt SignedMin = APInt::getSignedMinValue(NumDstBits).sext(NumSrcBits);

  if (sd_match(In, m_SMin(m_SMax(m_Value(Val), m_SpecificInt(SignedMin)),
                          m_SpecificInt(SignedMax))))
    return Val;

  if (sd_match(In, m_SMax(m_SMin(m_Value(Val), m_SpecificInt(SignedMax)),
                          m_SpecificInt(SignedMin))))
    return Val;

  return SDValue();
}

/// Detect patterns of truncation with unsigned saturation:
static SDValue detectSSatUPattern(SDValue In, EVT VT, SelectionDAG &DAG,
                                  const SDLoc &DL) {
  unsigned NumDstBits = VT.getScalarSizeInBits();
  unsigned NumSrcBits = In.getScalarValueSizeInBits();
  // Saturation with truncation. We truncate from InVT to VT.
  assert(NumSrcBits > NumDstBits && "Unexpected types for truncate operation");

  SDValue Val;
  APInt UnsignedMax = APInt::getMaxValue(NumDstBits).zext(NumSrcBits);
  // Min == 0, Max is unsigned max of destination type.
  if (sd_match(In, m_SMax(m_SMin(m_Value(Val), m_SpecificInt(UnsignedMax)),
                          m_Zero())))
    return Val;

  if (sd_match(In, m_SMin(m_SMax(m_Value(Val), m_Zero()),
                          m_SpecificInt(UnsignedMax))))
    return Val;

  if (sd_match(In, m_UMin(m_SMax(m_Value(Val), m_Zero()),
                          m_SpecificInt(UnsignedMax))))
    return Val;

  return SDValue();
}

static SDValue foldToSaturated(SDNode *N, EVT &VT, SDValue &Src, EVT &SrcVT,
                               SDLoc &DL, const TargetLowering &TLI,
                               SelectionDAG &DAG) {
  auto AllowedTruncateSat = [&](unsigned Opc, EVT SrcVT, EVT VT) -> bool {
    return (TLI.isOperationLegalOrCustom(Opc, SrcVT) &&
            TLI.isTypeDesirableForOp(Opc, VT));
  };

  if (Src.getOpcode() == ISD::SMIN || Src.getOpcode() == ISD::SMAX) {
    if (AllowedTruncateSat(ISD::TRUNCATE_SSAT_S, SrcVT, VT))
      if (SDValue SSatVal = detectSSatSPattern(Src, VT))
        return DAG.getNode(ISD::TRUNCATE_SSAT_S, DL, VT, SSatVal);
    if (AllowedTruncateSat(ISD::TRUNCATE_SSAT_U, SrcVT, VT))
      if (SDValue SSatVal = detectSSatUPattern(Src, VT, DAG, DL))
        return DAG.getNode(ISD::TRUNCATE_SSAT_U, DL, VT, SSatVal);
  } else if (Src.getOpcode() == ISD::UMIN) {
    if (AllowedTruncateSat(ISD::TRUNCATE_SSAT_U, SrcVT, VT))
      if (SDValue SSatVal = detectSSatUPattern(Src, VT, DAG, DL))
        return DAG.getNode(ISD::TRUNCATE_SSAT_U, DL, VT, SSatVal);
    if (AllowedTruncateSat(ISD::TRUNCATE_USAT_U, SrcVT, VT))
      if (SDValue USatVal = detectUSatUPattern(Src, VT))
        return DAG.getNode(ISD::TRUNCATE_USAT_U, DL, VT, USatVal);
  }

  return SDValue();
}

SDValue DAGCombiner::visitTRUNCATE(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  EVT SrcVT = N0.getValueType();
  bool isLE = DAG.getDataLayout().isLittleEndian();
  SDLoc DL(N);

  // trunc(undef) = undef
  if (N0.isUndef())
    return DAG.getUNDEF(VT);

  // fold (truncate (truncate x)) -> (truncate x)
  if (N0.getOpcode() == ISD::TRUNCATE)
    return DAG.getNode(ISD::TRUNCATE, DL, VT, N0.getOperand(0));

  // fold saturated truncate
  if (SDValue SaturatedTR = foldToSaturated(N, VT, N0, SrcVT, DL, TLI, DAG))
    return SaturatedTR;

  // fold (truncate c1) -> c1
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::TRUNCATE, DL, VT, {N0}))
    return C;

  // fold (truncate (ext x)) -> (ext x) or (truncate x) or x
  if (N0.getOpcode() == ISD::ZERO_EXTEND ||
      N0.getOpcode() == ISD::SIGN_EXTEND ||
      N0.getOpcode() == ISD::ANY_EXTEND) {
    // if the source is smaller than the dest, we still need an extend.
    if (N0.getOperand(0).getValueType().bitsLT(VT))
      return DAG.getNode(N0.getOpcode(), DL, VT, N0.getOperand(0));
    // if the source is larger than the dest, than we just need the truncate.
    if (N0.getOperand(0).getValueType().bitsGT(VT))
      return DAG.getNode(ISD::TRUNCATE, DL, VT, N0.getOperand(0));
    // if the source and dest are the same type, we can drop both the extend
    // and the truncate.
    return N0.getOperand(0);
  }

  // Try to narrow a truncate-of-sext_in_reg to the destination type:
  // trunc (sign_ext_inreg X, iM) to iN --> sign_ext_inreg (trunc X to iN), iM
  if (!LegalTypes && N0.getOpcode() == ISD::SIGN_EXTEND_INREG &&
      N0.hasOneUse()) {
    SDValue X = N0.getOperand(0);
    SDValue ExtVal = N0.getOperand(1);
    EVT ExtVT = cast<VTSDNode>(ExtVal)->getVT();
    if (ExtVT.bitsLT(VT) && TLI.preferSextInRegOfTruncate(VT, SrcVT, ExtVT)) {
      SDValue TrX = DAG.getNode(ISD::TRUNCATE, DL, VT, X);
      return DAG.getNode(ISD::SIGN_EXTEND_INREG, DL, VT, TrX, ExtVal);
    }
  }

  // If this is anyext(trunc), don't fold it, allow ourselves to be folded.
  if (N->hasOneUse() && (N->use_begin()->getOpcode() == ISD::ANY_EXTEND))
    return SDValue();

  // Fold extract-and-trunc into a narrow extract. For example:
  //   i64 x = EXTRACT_VECTOR_ELT(v2i64 val, i32 1)
  //   i32 y = TRUNCATE(i64 x)
  //        -- becomes --
  //   v16i8 b = BITCAST (v2i64 val)
  //   i8 x = EXTRACT_VECTOR_ELT(v16i8 b, i32 8)
  //
  // Note: We only run this optimization after type legalization (which often
  // creates this pattern) and before operation legalization after which
  // we need to be more careful about the vector instructions that we generate.
  if (LegalTypes && !LegalOperations && VT.isScalarInteger() && VT != MVT::i1 &&
      N0->hasOneUse()) {
    EVT TrTy = N->getValueType(0);
    SDValue Src = N0;

    // Check for cases where we shift down an upper element before truncation.
    int EltOffset = 0;
    if (Src.getOpcode() == ISD::SRL && Src.getOperand(0)->hasOneUse()) {
      if (auto ShAmt = DAG.getValidShiftAmount(Src)) {
        if ((*ShAmt % TrTy.getSizeInBits()) == 0) {
          Src = Src.getOperand(0);
          EltOffset = *ShAmt / TrTy.getSizeInBits();
        }
      }
    }

    if (Src.getOpcode() == ISD::EXTRACT_VECTOR_ELT) {
      EVT VecTy = Src.getOperand(0).getValueType();
      EVT ExTy = Src.getValueType();

      auto EltCnt = VecTy.getVectorElementCount();
      unsigned SizeRatio = ExTy.getSizeInBits() / TrTy.getSizeInBits();
      auto NewEltCnt = EltCnt * SizeRatio;

      EVT NVT = EVT::getVectorVT(*DAG.getContext(), TrTy, NewEltCnt);
      assert(NVT.getSizeInBits() == VecTy.getSizeInBits() && "Invalid Size");

      SDValue EltNo = Src->getOperand(1);
      if (isa<ConstantSDNode>(EltNo) && isTypeLegal(NVT)) {
        int Elt = EltNo->getAsZExtVal();
        int Index = isLE ? (Elt * SizeRatio + EltOffset)
                         : (Elt * SizeRatio + (SizeRatio - 1) - EltOffset);
        return DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, TrTy,
                           DAG.getBitcast(NVT, Src.getOperand(0)),
                           DAG.getVectorIdxConstant(Index, DL));
      }
    }
  }

  // trunc (select c, a, b) -> select c, (trunc a), (trunc b)
  if (N0.getOpcode() == ISD::SELECT && N0.hasOneUse() &&
      TLI.isTruncateFree(SrcVT, VT)) {
    if (!LegalOperations ||
        (TLI.isOperationLegal(ISD::SELECT, SrcVT) &&
         TLI.isNarrowingProfitable(N0.getNode(), SrcVT, VT))) {
      SDLoc SL(N0);
      SDValue Cond = N0.getOperand(0);
      SDValue TruncOp0 = DAG.getNode(ISD::TRUNCATE, SL, VT, N0.getOperand(1));
      SDValue TruncOp1 = DAG.getNode(ISD::TRUNCATE, SL, VT, N0.getOperand(2));
      return DAG.getNode(ISD::SELECT, DL, VT, Cond, TruncOp0, TruncOp1);
    }
  }

  // trunc (shl x, K) -> shl (trunc x), K => K < VT.getScalarSizeInBits()
  if (N0.getOpcode() == ISD::SHL && N0.hasOneUse() &&
      (!LegalOperations || TLI.isOperationLegal(ISD::SHL, VT)) &&
      TLI.isTypeDesirableForOp(ISD::SHL, VT)) {
    SDValue Amt = N0.getOperand(1);
    KnownBits Known = DAG.computeKnownBits(Amt);
    unsigned Size = VT.getScalarSizeInBits();
    if (Known.countMaxActiveBits() <= Log2_32(Size)) {
      EVT AmtVT = TLI.getShiftAmountTy(VT, DAG.getDataLayout());
      SDValue Trunc = DAG.getNode(ISD::TRUNCATE, DL, VT, N0.getOperand(0));
      if (AmtVT != Amt.getValueType()) {
        Amt = DAG.getZExtOrTrunc(Amt, DL, AmtVT);
        AddToWorklist(Amt.getNode());
      }
      return DAG.getNode(ISD::SHL, DL, VT, Trunc, Amt);
    }
  }

  if (SDValue V = foldSubToUSubSat(VT, N0.getNode(), DL))
    return V;

  if (SDValue ABD = foldABSToABD(N, DL))
    return ABD;

  // Attempt to pre-truncate BUILD_VECTOR sources.
  if (N0.getOpcode() == ISD::BUILD_VECTOR && !LegalOperations &&
      N0.hasOneUse() &&
      TLI.isTruncateFree(SrcVT.getScalarType(), VT.getScalarType()) &&
      // Avoid creating illegal types if running after type legalizer.
      (!LegalTypes || TLI.isTypeLegal(VT.getScalarType()))) {
    EVT SVT = VT.getScalarType();
    SmallVector<SDValue, 8> TruncOps;
    for (const SDValue &Op : N0->op_values()) {
      SDValue TruncOp = DAG.getNode(ISD::TRUNCATE, DL, SVT, Op);
      TruncOps.push_back(TruncOp);
    }
    return DAG.getBuildVector(VT, DL, TruncOps);
  }

  // trunc (splat_vector x) -> splat_vector (trunc x)
  if (N0.getOpcode() == ISD::SPLAT_VECTOR &&
      (!LegalTypes || TLI.isTypeLegal(VT.getScalarType())) &&
      (!LegalOperations || TLI.isOperationLegal(ISD::SPLAT_VECTOR, VT))) {
    EVT SVT = VT.getScalarType();
    return DAG.getSplatVector(
        VT, DL, DAG.getNode(ISD::TRUNCATE, DL, SVT, N0->getOperand(0)));
  }

  // Fold a series of buildvector, bitcast, and truncate if possible.
  // For example fold
  //   (2xi32 trunc (bitcast ((4xi32)buildvector x, x, y, y) 2xi64)) to
  //   (2xi32 (buildvector x, y)).
  if (Level == AfterLegalizeVectorOps && VT.isVector() &&
      N0.getOpcode() == ISD::BITCAST && N0.hasOneUse() &&
      N0.getOperand(0).getOpcode() == ISD::BUILD_VECTOR &&
      N0.getOperand(0).hasOneUse()) {
    SDValue BuildVect = N0.getOperand(0);
    EVT BuildVectEltTy = BuildVect.getValueType().getVectorElementType();
    EVT TruncVecEltTy = VT.getVectorElementType();

    // Check that the element types match.
    if (BuildVectEltTy == TruncVecEltTy) {
      // Now we only need to compute the offset of the truncated elements.
      unsigned BuildVecNumElts =  BuildVect.getNumOperands();
      unsigned TruncVecNumElts = VT.getVectorNumElements();
      unsigned TruncEltOffset = BuildVecNumElts / TruncVecNumElts;
      unsigned FirstElt = isLE ? 0 : (TruncEltOffset - 1);

      assert((BuildVecNumElts % TruncVecNumElts) == 0 &&
             "Invalid number of elements");

      SmallVector<SDValue, 8> Opnds;
      for (unsigned i = FirstElt, e = BuildVecNumElts; i < e;
           i += TruncEltOffset)
        Opnds.push_back(BuildVect.getOperand(i));

      return DAG.getBuildVector(VT, DL, Opnds);
    }
  }

  // fold (truncate (load x)) -> (smaller load x)
  // fold (truncate (srl (load x), c)) -> (smaller load (x+c/evtbits))
  if (!LegalTypes || TLI.isTypeDesirableForOp(N0.getOpcode(), VT)) {
    if (SDValue Reduced = reduceLoadWidth(N))
      return Reduced;

    // Handle the case where the truncated result is at least as wide as the
    // loaded type.
    if (N0.hasOneUse() && ISD::isUNINDEXEDLoad(N0.getNode())) {
      auto *LN0 = cast<LoadSDNode>(N0);
      if (LN0->isSimple() && LN0->getMemoryVT().bitsLE(VT)) {
        SDValue NewLoad = DAG.getExtLoad(
            LN0->getExtensionType(), SDLoc(LN0), VT, LN0->getChain(),
            LN0->getBasePtr(), LN0->getMemoryVT(), LN0->getMemOperand());
        DAG.ReplaceAllUsesOfValueWith(N0.getValue(1), NewLoad.getValue(1));
        return NewLoad;
      }
    }
  }

  // fold (trunc (concat ... x ...)) -> (concat ..., (trunc x), ...)),
  // where ... are all 'undef'.
  if (N0.getOpcode() == ISD::CONCAT_VECTORS && !LegalTypes) {
    SmallVector<EVT, 8> VTs;
    SDValue V;
    unsigned Idx = 0;
    unsigned NumDefs = 0;

    for (unsigned i = 0, e = N0.getNumOperands(); i != e; ++i) {
      SDValue X = N0.getOperand(i);
      if (!X.isUndef()) {
        V = X;
        Idx = i;
        NumDefs++;
      }
      // Stop if more than one members are non-undef.
      if (NumDefs > 1)
        break;

      VTs.push_back(EVT::getVectorVT(*DAG.getContext(),
                                     VT.getVectorElementType(),
                                     X.getValueType().getVectorElementCount()));
    }

    if (NumDefs == 0)
      return DAG.getUNDEF(VT);

    if (NumDefs == 1) {
      assert(V.getNode() && "The single defined operand is empty!");
      SmallVector<SDValue, 8> Opnds;
      for (unsigned i = 0, e = VTs.size(); i != e; ++i) {
        if (i != Idx) {
          Opnds.push_back(DAG.getUNDEF(VTs[i]));
          continue;
        }
        SDValue NV = DAG.getNode(ISD::TRUNCATE, SDLoc(V), VTs[i], V);
        AddToWorklist(NV.getNode());
        Opnds.push_back(NV);
      }
      return DAG.getNode(ISD::CONCAT_VECTORS, DL, VT, Opnds);
    }
  }

  // Fold truncate of a bitcast of a vector to an extract of the low vector
  // element.
  //
  // e.g. trunc (i64 (bitcast v2i32:x)) -> extract_vector_elt v2i32:x, idx
  if (N0.getOpcode() == ISD::BITCAST && !VT.isVector()) {
    SDValue VecSrc = N0.getOperand(0);
    EVT VecSrcVT = VecSrc.getValueType();
    if (VecSrcVT.isVector() && VecSrcVT.getScalarType() == VT &&
        (!LegalOperations ||
         TLI.isOperationLegal(ISD::EXTRACT_VECTOR_ELT, VecSrcVT))) {
      unsigned Idx = isLE ? 0 : VecSrcVT.getVectorNumElements() - 1;
      return DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, VT, VecSrc,
                         DAG.getVectorIdxConstant(Idx, DL));
    }
  }

  // Simplify the operands using demanded-bits information.
  if (SimplifyDemandedBits(SDValue(N, 0)))
    return SDValue(N, 0);

  // fold (truncate (extract_subvector(ext x))) ->
  //      (extract_subvector x)
  // TODO: This can be generalized to cover cases where the truncate and extract
  // do not fully cancel each other out.
  if (!LegalTypes && N0.getOpcode() == ISD::EXTRACT_SUBVECTOR) {
    SDValue N00 = N0.getOperand(0);
    if (N00.getOpcode() == ISD::SIGN_EXTEND ||
        N00.getOpcode() == ISD::ZERO_EXTEND ||
        N00.getOpcode() == ISD::ANY_EXTEND) {
      if (N00.getOperand(0)->getValueType(0).getVectorElementType() ==
          VT.getVectorElementType())
        return DAG.getNode(ISD::EXTRACT_SUBVECTOR, SDLoc(N0->getOperand(0)), VT,
                           N00.getOperand(0), N0.getOperand(1));
    }
  }

  if (SDValue NewVSel = matchVSelectOpSizesWithSetCC(N))
    return NewVSel;

  // Narrow a suitable binary operation with a non-opaque constant operand by
  // moving it ahead of the truncate. This is limited to pre-legalization
  // because targets may prefer a wider type during later combines and invert
  // this transform.
  switch (N0.getOpcode()) {
  case ISD::ADD:
  case ISD::SUB:
  case ISD::MUL:
  case ISD::AND:
  case ISD::OR:
  case ISD::XOR:
    if (!LegalOperations && N0.hasOneUse() &&
        (isConstantOrConstantVector(N0.getOperand(0), true) ||
         isConstantOrConstantVector(N0.getOperand(1), true))) {
      // TODO: We already restricted this to pre-legalization, but for vectors
      // we are extra cautious to not create an unsupported operation.
      // Target-specific changes are likely needed to avoid regressions here.
      if (VT.isScalarInteger() || TLI.isOperationLegal(N0.getOpcode(), VT)) {
        SDValue NarrowL = DAG.getNode(ISD::TRUNCATE, DL, VT, N0.getOperand(0));
        SDValue NarrowR = DAG.getNode(ISD::TRUNCATE, DL, VT, N0.getOperand(1));
        return DAG.getNode(N0.getOpcode(), DL, VT, NarrowL, NarrowR);
      }
    }
    break;
  case ISD::ADDE:
  case ISD::UADDO_CARRY:
    // (trunc adde(X, Y, Carry)) -> (adde trunc(X), trunc(Y), Carry)
    // (trunc uaddo_carry(X, Y, Carry)) ->
    //     (uaddo_carry trunc(X), trunc(Y), Carry)
    // When the adde's carry is not used.
    // We only do for uaddo_carry before legalize operation
    if (((!LegalOperations && N0.getOpcode() == ISD::UADDO_CARRY) ||
         TLI.isOperationLegal(N0.getOpcode(), VT)) &&
        N0.hasOneUse() && !N0->hasAnyUseOfValue(1)) {
      SDValue X = DAG.getNode(ISD::TRUNCATE, DL, VT, N0.getOperand(0));
      SDValue Y = DAG.getNode(ISD::TRUNCATE, DL, VT, N0.getOperand(1));
      SDVTList VTs = DAG.getVTList(VT, N0->getValueType(1));
      return DAG.getNode(N0.getOpcode(), DL, VTs, X, Y, N0.getOperand(2));
    }
    break;
  case ISD::USUBSAT:
    // Truncate the USUBSAT only if LHS is a known zero-extension, its not
    // enough to know that the upper bits are zero we must ensure that we don't
    // introduce an extra truncate.
    if (!LegalOperations && N0.hasOneUse() &&
        N0.getOperand(0).getOpcode() == ISD::ZERO_EXTEND &&
        N0.getOperand(0).getOperand(0).getScalarValueSizeInBits() <=
            VT.getScalarSizeInBits() &&
        hasOperation(N0.getOpcode(), VT)) {
      return getTruncatedUSUBSAT(VT, SrcVT, N0.getOperand(0), N0.getOperand(1),
                                 DAG, DL);
    }
    break;
  }

  return SDValue();
}

static SDNode *getBuildPairElt(SDNode *N, unsigned i) {
  SDValue Elt = N->getOperand(i);
  if (Elt.getOpcode() != ISD::MERGE_VALUES)
    return Elt.getNode();
  return Elt.getOperand(Elt.getResNo()).getNode();
}

/// build_pair (load, load) -> load
/// if load locations are consecutive.
SDValue DAGCombiner::CombineConsecutiveLoads(SDNode *N, EVT VT) {
  assert(N->getOpcode() == ISD::BUILD_PAIR);

  auto *LD1 = dyn_cast<LoadSDNode>(getBuildPairElt(N, 0));
  auto *LD2 = dyn_cast<LoadSDNode>(getBuildPairElt(N, 1));

  // A BUILD_PAIR is always having the least significant part in elt 0 and the
  // most significant part in elt 1. So when combining into one large load, we
  // need to consider the endianness.
  if (DAG.getDataLayout().isBigEndian())
    std::swap(LD1, LD2);

  if (!LD1 || !LD2 || !ISD::isNON_EXTLoad(LD1) || !ISD::isNON_EXTLoad(LD2) ||
      !LD1->hasOneUse() || !LD2->hasOneUse() ||
      LD1->getAddressSpace() != LD2->getAddressSpace())
    return SDValue();

  unsigned LD1Fast = 0;
  EVT LD1VT = LD1->getValueType(0);
  unsigned LD1Bytes = LD1VT.getStoreSize();
  if ((!LegalOperations || TLI.isOperationLegal(ISD::LOAD, VT)) &&
      DAG.areNonVolatileConsecutiveLoads(LD2, LD1, LD1Bytes, 1) &&
      TLI.allowsMemoryAccess(*DAG.getContext(), DAG.getDataLayout(), VT,
                             *LD1->getMemOperand(), &LD1Fast) && LD1Fast)
    return DAG.getLoad(VT, SDLoc(N), LD1->getChain(), LD1->getBasePtr(),
                       LD1->getPointerInfo(), LD1->getAlign());

  return SDValue();
}

static unsigned getPPCf128HiElementSelector(const SelectionDAG &DAG) {
  // On little-endian machines, bitcasting from ppcf128 to i128 does swap the Hi
  // and Lo parts; on big-endian machines it doesn't.
  return DAG.getDataLayout().isBigEndian() ? 1 : 0;
}

SDValue DAGCombiner::foldBitcastedFPLogic(SDNode *N, SelectionDAG &DAG,
                                          const TargetLowering &TLI) {
  // If this is not a bitcast to an FP type or if the target doesn't have
  // IEEE754-compliant FP logic, we're done.
  EVT VT = N->getValueType(0);
  SDValue N0 = N->getOperand(0);
  EVT SourceVT = N0.getValueType();

  if (!VT.isFloatingPoint())
    return SDValue();

  // TODO: Handle cases where the integer constant is a different scalar
  // bitwidth to the FP.
  if (VT.getScalarSizeInBits() != SourceVT.getScalarSizeInBits())
    return SDValue();

  unsigned FPOpcode;
  APInt SignMask;
  switch (N0.getOpcode()) {
  case ISD::AND:
    FPOpcode = ISD::FABS;
    SignMask = ~APInt::getSignMask(SourceVT.getScalarSizeInBits());
    break;
  case ISD::XOR:
    FPOpcode = ISD::FNEG;
    SignMask = APInt::getSignMask(SourceVT.getScalarSizeInBits());
    break;
  case ISD::OR:
    FPOpcode = ISD::FABS;
    SignMask = APInt::getSignMask(SourceVT.getScalarSizeInBits());
    break;
  default:
    return SDValue();
  }

  if (LegalOperations && !TLI.isOperationLegal(FPOpcode, VT))
    return SDValue();

  // This needs to be the inverse of logic in foldSignChangeInBitcast.
  // FIXME: I don't think looking for bitcast intrinsically makes sense, but
  // removing this would require more changes.
  auto IsBitCastOrFree = [&TLI, FPOpcode](SDValue Op, EVT VT) {
    if (Op.getOpcode() == ISD::BITCAST && Op.getOperand(0).getValueType() == VT)
      return true;

    return FPOpcode == ISD::FABS ? TLI.isFAbsFree(VT) : TLI.isFNegFree(VT);
  };

  // Fold (bitcast int (and (bitcast fp X to int), 0x7fff...) to fp) -> fabs X
  // Fold (bitcast int (xor (bitcast fp X to int), 0x8000...) to fp) -> fneg X
  // Fold (bitcast int (or (bitcast fp X to int), 0x8000...) to fp) ->
  //   fneg (fabs X)
  SDValue LogicOp0 = N0.getOperand(0);
  ConstantSDNode *LogicOp1 = isConstOrConstSplat(N0.getOperand(1), true);
  if (LogicOp1 && LogicOp1->getAPIntValue() == SignMask &&
      IsBitCastOrFree(LogicOp0, VT)) {
    SDValue CastOp0 = DAG.getNode(ISD::BITCAST, SDLoc(N), VT, LogicOp0);
    SDValue FPOp = DAG.getNode(FPOpcode, SDLoc(N), VT, CastOp0);
    NumFPLogicOpsConv++;
    if (N0.getOpcode() == ISD::OR)
      return DAG.getNode(ISD::FNEG, SDLoc(N), VT, FPOp);
    return FPOp;
  }

  return SDValue();
}

SDValue DAGCombiner::visitBITCAST(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);

  if (N0.isUndef())
    return DAG.getUNDEF(VT);

  // If the input is a BUILD_VECTOR with all constant elements, fold this now.
  // Only do this before legalize types, unless both types are integer and the
  // scalar type is legal. Only do this before legalize ops, since the target
  // maybe depending on the bitcast.
  // First check to see if this is all constant.
  // TODO: Support FP bitcasts after legalize types.
  if (VT.isVector() &&
      (!LegalTypes ||
       (!LegalOperations && VT.isInteger() && N0.getValueType().isInteger() &&
        TLI.isTypeLegal(VT.getVectorElementType()))) &&
      N0.getOpcode() == ISD::BUILD_VECTOR && N0->hasOneUse() &&
      cast<BuildVectorSDNode>(N0)->isConstant())
    return ConstantFoldBITCASTofBUILD_VECTOR(N0.getNode(),
                                             VT.getVectorElementType());

  // If the input is a constant, let getNode fold it.
  if (isIntOrFPConstant(N0)) {
    // If we can't allow illegal operations, we need to check that this is just
    // a fp -> int or int -> conversion and that the resulting operation will
    // be legal.
    if (!LegalOperations ||
        (isa<ConstantSDNode>(N0) && VT.isFloatingPoint() && !VT.isVector() &&
         TLI.isOperationLegal(ISD::ConstantFP, VT)) ||
        (isa<ConstantFPSDNode>(N0) && VT.isInteger() && !VT.isVector() &&
         TLI.isOperationLegal(ISD::Constant, VT))) {
      SDValue C = DAG.getBitcast(VT, N0);
      if (C.getNode() != N)
        return C;
    }
  }

  // (conv (conv x, t1), t2) -> (conv x, t2)
  if (N0.getOpcode() == ISD::BITCAST)
    return DAG.getBitcast(VT, N0.getOperand(0));

  // fold (conv (logicop (conv x), (c))) -> (logicop x, (conv c))
  // iff the current bitwise logicop type isn't legal
  if (ISD::isBitwiseLogicOp(N0.getOpcode()) && VT.isInteger() &&
      !TLI.isTypeLegal(N0.getOperand(0).getValueType())) {
    auto IsFreeBitcast = [VT](SDValue V) {
      return (V.getOpcode() == ISD::BITCAST &&
              V.getOperand(0).getValueType() == VT) ||
             (ISD::isBuildVectorOfConstantSDNodes(V.getNode()) &&
              V->hasOneUse());
    };
    if (IsFreeBitcast(N0.getOperand(0)) && IsFreeBitcast(N0.getOperand(1)))
      return DAG.getNode(N0.getOpcode(), SDLoc(N), VT,
                         DAG.getBitcast(VT, N0.getOperand(0)),
                         DAG.getBitcast(VT, N0.getOperand(1)));
  }

  // fold (conv (load x)) -> (load (conv*)x)
  // If the resultant load doesn't need a higher alignment than the original!
  if (ISD::isNormalLoad(N0.getNode()) && N0.hasOneUse() &&
      // Do not remove the cast if the types differ in endian layout.
      TLI.hasBigEndianPartOrdering(N0.getValueType(), DAG.getDataLayout()) ==
          TLI.hasBigEndianPartOrdering(VT, DAG.getDataLayout()) &&
      // If the load is volatile, we only want to change the load type if the
      // resulting load is legal. Otherwise we might increase the number of
      // memory accesses. We don't care if the original type was legal or not
      // as we assume software couldn't rely on the number of accesses of an
      // illegal type.
      ((!LegalOperations && cast<LoadSDNode>(N0)->isSimple()) ||
       TLI.isOperationLegal(ISD::LOAD, VT))) {
    LoadSDNode *LN0 = cast<LoadSDNode>(N0);

    if (TLI.isLoadBitCastBeneficial(N0.getValueType(), VT, DAG,
                                    *LN0->getMemOperand())) {
      SDValue Load =
          DAG.getLoad(VT, SDLoc(N), LN0->getChain(), LN0->getBasePtr(),
                      LN0->getMemOperand());
      DAG.ReplaceAllUsesOfValueWith(N0.getValue(1), Load.getValue(1));
      return Load;
    }
  }

  if (SDValue V = foldBitcastedFPLogic(N, DAG, TLI))
    return V;

  // fold (bitconvert (fneg x)) -> (xor (bitconvert x), signbit)
  // fold (bitconvert (fabs x)) -> (and (bitconvert x), (not signbit))
  //
  // For ppc_fp128:
  // fold (bitcast (fneg x)) ->
  //     flipbit = signbit
  //     (xor (bitcast x) (build_pair flipbit, flipbit))
  //
  // fold (bitcast (fabs x)) ->
  //     flipbit = (and (extract_element (bitcast x), 0), signbit)
  //     (xor (bitcast x) (build_pair flipbit, flipbit))
  // This often reduces constant pool loads.
  if (((N0.getOpcode() == ISD::FNEG && !TLI.isFNegFree(N0.getValueType())) ||
       (N0.getOpcode() == ISD::FABS && !TLI.isFAbsFree(N0.getValueType()))) &&
      N0->hasOneUse() && VT.isInteger() && !VT.isVector() &&
      !N0.getValueType().isVector()) {
    SDValue NewConv = DAG.getBitcast(VT, N0.getOperand(0));
    AddToWorklist(NewConv.getNode());

    SDLoc DL(N);
    if (N0.getValueType() == MVT::ppcf128 && !LegalTypes) {
      assert(VT.getSizeInBits() == 128);
      SDValue SignBit = DAG.getConstant(
          APInt::getSignMask(VT.getSizeInBits() / 2), SDLoc(N0), MVT::i64);
      SDValue FlipBit;
      if (N0.getOpcode() == ISD::FNEG) {
        FlipBit = SignBit;
        AddToWorklist(FlipBit.getNode());
      } else {
        assert(N0.getOpcode() == ISD::FABS);
        SDValue Hi =
            DAG.getNode(ISD::EXTRACT_ELEMENT, SDLoc(NewConv), MVT::i64, NewConv,
                        DAG.getIntPtrConstant(getPPCf128HiElementSelector(DAG),
                                              SDLoc(NewConv)));
        AddToWorklist(Hi.getNode());
        FlipBit = DAG.getNode(ISD::AND, SDLoc(N0), MVT::i64, Hi, SignBit);
        AddToWorklist(FlipBit.getNode());
      }
      SDValue FlipBits =
          DAG.getNode(ISD::BUILD_PAIR, SDLoc(N0), VT, FlipBit, FlipBit);
      AddToWorklist(FlipBits.getNode());
      return DAG.getNode(ISD::XOR, DL, VT, NewConv, FlipBits);
    }
    APInt SignBit = APInt::getSignMask(VT.getSizeInBits());
    if (N0.getOpcode() == ISD::FNEG)
      return DAG.getNode(ISD::XOR, DL, VT,
                         NewConv, DAG.getConstant(SignBit, DL, VT));
    assert(N0.getOpcode() == ISD::FABS);
    return DAG.getNode(ISD::AND, DL, VT,
                       NewConv, DAG.getConstant(~SignBit, DL, VT));
  }

  // fold (bitconvert (fcopysign cst, x)) ->
  //         (or (and (bitconvert x), sign), (and cst, (not sign)))
  // Note that we don't handle (copysign x, cst) because this can always be
  // folded to an fneg or fabs.
  //
  // For ppc_fp128:
  // fold (bitcast (fcopysign cst, x)) ->
  //     flipbit = (and (extract_element
  //                     (xor (bitcast cst), (bitcast x)), 0),
  //                    signbit)
  //     (xor (bitcast cst) (build_pair flipbit, flipbit))
  if (N0.getOpcode() == ISD::FCOPYSIGN && N0->hasOneUse() &&
      isa<ConstantFPSDNode>(N0.getOperand(0)) && VT.isInteger() &&
      !VT.isVector()) {
    unsigned OrigXWidth = N0.getOperand(1).getValueSizeInBits();
    EVT IntXVT = EVT::getIntegerVT(*DAG.getContext(), OrigXWidth);
    if (isTypeLegal(IntXVT)) {
      SDValue X = DAG.getBitcast(IntXVT, N0.getOperand(1));
      AddToWorklist(X.getNode());

      // If X has a different width than the result/lhs, sext it or truncate it.
      unsigned VTWidth = VT.getSizeInBits();
      if (OrigXWidth < VTWidth) {
        X = DAG.getNode(ISD::SIGN_EXTEND, SDLoc(N), VT, X);
        AddToWorklist(X.getNode());
      } else if (OrigXWidth > VTWidth) {
        // To get the sign bit in the right place, we have to shift it right
        // before truncating.
        SDLoc DL(X);
        X = DAG.getNode(ISD::SRL, DL,
                        X.getValueType(), X,
                        DAG.getConstant(OrigXWidth-VTWidth, DL,
                                        X.getValueType()));
        AddToWorklist(X.getNode());
        X = DAG.getNode(ISD::TRUNCATE, SDLoc(X), VT, X);
        AddToWorklist(X.getNode());
      }

      if (N0.getValueType() == MVT::ppcf128 && !LegalTypes) {
        APInt SignBit = APInt::getSignMask(VT.getSizeInBits() / 2);
        SDValue Cst = DAG.getBitcast(VT, N0.getOperand(0));
        AddToWorklist(Cst.getNode());
        SDValue X = DAG.getBitcast(VT, N0.getOperand(1));
        AddToWorklist(X.getNode());
        SDValue XorResult = DAG.getNode(ISD::XOR, SDLoc(N0), VT, Cst, X);
        AddToWorklist(XorResult.getNode());
        SDValue XorResult64 = DAG.getNode(
            ISD::EXTRACT_ELEMENT, SDLoc(XorResult), MVT::i64, XorResult,
            DAG.getIntPtrConstant(getPPCf128HiElementSelector(DAG),
                                  SDLoc(XorResult)));
        AddToWorklist(XorResult64.getNode());
        SDValue FlipBit =
            DAG.getNode(ISD::AND, SDLoc(XorResult64), MVT::i64, XorResult64,
                        DAG.getConstant(SignBit, SDLoc(XorResult64), MVT::i64));
        AddToWorklist(FlipBit.getNode());
        SDValue FlipBits =
            DAG.getNode(ISD::BUILD_PAIR, SDLoc(N0), VT, FlipBit, FlipBit);
        AddToWorklist(FlipBits.getNode());
        return DAG.getNode(ISD::XOR, SDLoc(N), VT, Cst, FlipBits);
      }
      APInt SignBit = APInt::getSignMask(VT.getSizeInBits());
      X = DAG.getNode(ISD::AND, SDLoc(X), VT,
                      X, DAG.getConstant(SignBit, SDLoc(X), VT));
      AddToWorklist(X.getNode());

      SDValue Cst = DAG.getBitcast(VT, N0.getOperand(0));
      Cst = DAG.getNode(ISD::AND, SDLoc(Cst), VT,
                        Cst, DAG.getConstant(~SignBit, SDLoc(Cst), VT));
      AddToWorklist(Cst.getNode());

      return DAG.getNode(ISD::OR, SDLoc(N), VT, X, Cst);
    }
  }

  // bitconvert(build_pair(ld, ld)) -> ld iff load locations are consecutive.
  if (N0.getOpcode() == ISD::BUILD_PAIR)
    if (SDValue CombineLD = CombineConsecutiveLoads(N0.getNode(), VT))
      return CombineLD;

  // Remove double bitcasts from shuffles - this is often a legacy of
  // XformToShuffleWithZero being used to combine bitmaskings (of
  // float vectors bitcast to integer vectors) into shuffles.
  // bitcast(shuffle(bitcast(s0),bitcast(s1))) -> shuffle(s0,s1)
  if (Level < AfterLegalizeDAG && TLI.isTypeLegal(VT) && VT.isVector() &&
      N0->getOpcode() == ISD::VECTOR_SHUFFLE && N0.hasOneUse() &&
      VT.getVectorNumElements() >= N0.getValueType().getVectorNumElements() &&
      !(VT.getVectorNumElements() % N0.getValueType().getVectorNumElements())) {
    ShuffleVectorSDNode *SVN = cast<ShuffleVectorSDNode>(N0);

    // If operands are a bitcast, peek through if it casts the original VT.
    // If operands are a constant, just bitcast back to original VT.
    auto PeekThroughBitcast = [&](SDValue Op) {
      if (Op.getOpcode() == ISD::BITCAST &&
          Op.getOperand(0).getValueType() == VT)
        return SDValue(Op.getOperand(0));
      if (Op.isUndef() || isAnyConstantBuildVector(Op))
        return DAG.getBitcast(VT, Op);
      return SDValue();
    };

    // FIXME: If either input vector is bitcast, try to convert the shuffle to
    // the result type of this bitcast. This would eliminate at least one
    // bitcast. See the transform in InstCombine.
    SDValue SV0 = PeekThroughBitcast(N0->getOperand(0));
    SDValue SV1 = PeekThroughBitcast(N0->getOperand(1));
    if (!(SV0 && SV1))
      return SDValue();

    int MaskScale =
        VT.getVectorNumElements() / N0.getValueType().getVectorNumElements();
    SmallVector<int, 8> NewMask;
    for (int M : SVN->getMask())
      for (int i = 0; i != MaskScale; ++i)
        NewMask.push_back(M < 0 ? -1 : M * MaskScale + i);

    SDValue LegalShuffle =
        TLI.buildLegalVectorShuffle(VT, SDLoc(N), SV0, SV1, NewMask, DAG);
    if (LegalShuffle)
      return LegalShuffle;
  }

  return SDValue();
}

SDValue DAGCombiner::visitBUILD_PAIR(SDNode *N) {
  EVT VT = N->getValueType(0);
  return CombineConsecutiveLoads(N, VT);
}

SDValue DAGCombiner::visitFREEZE(SDNode *N) {
  SDValue N0 = N->getOperand(0);

  if (DAG.isGuaranteedNotToBeUndefOrPoison(N0, /*PoisonOnly*/ false))
    return N0;

  // We currently avoid folding freeze over SRA/SRL, due to the problems seen
  // with (freeze (assert ext)) blocking simplifications of SRA/SRL. See for
  // example https://reviews.llvm.org/D136529#4120959.
  if (N0.getOpcode() == ISD::SRA || N0.getOpcode() == ISD::SRL)
    return SDValue();

  // Fold freeze(op(x, ...)) -> op(freeze(x), ...).
  // Try to push freeze through instructions that propagate but don't produce
  // poison as far as possible. If an operand of freeze follows three
  // conditions 1) one-use, 2) does not produce poison, and 3) has all but one
  // guaranteed-non-poison operands (or is a BUILD_VECTOR or similar) then push
  // the freeze through to the operands that are not guaranteed non-poison.
  // NOTE: we will strip poison-generating flags, so ignore them here.
  if (DAG.canCreateUndefOrPoison(N0, /*PoisonOnly*/ false,
                                 /*ConsiderFlags*/ false) ||
      N0->getNumValues() != 1 || !N0->hasOneUse())
    return SDValue();

  bool AllowMultipleMaybePoisonOperands =
      N0.getOpcode() == ISD::SELECT_CC ||
      N0.getOpcode() == ISD::SETCC ||
      N0.getOpcode() == ISD::BUILD_VECTOR ||
      N0.getOpcode() == ISD::BUILD_PAIR ||
      N0.getOpcode() == ISD::VECTOR_SHUFFLE ||
      N0.getOpcode() == ISD::CONCAT_VECTORS;

  // Avoid turning a BUILD_VECTOR that can be recognized as "all zeros", "all
  // ones" or "constant" into something that depends on FrozenUndef. We can
  // instead pick undef values to keep those properties, while at the same time
  // folding away the freeze.
  // If we implement a more general solution for folding away freeze(undef) in
  // the future, then this special handling can be removed.
  if (N0.getOpcode() == ISD::BUILD_VECTOR) {
    SDLoc DL(N0);
    EVT VT = N0.getValueType();
    if (llvm::ISD::isBuildVectorAllOnes(N0.getNode()))
      return DAG.getAllOnesConstant(DL, VT);
    if (llvm::ISD::isBuildVectorOfConstantSDNodes(N0.getNode())) {
      SmallVector<SDValue, 8> NewVecC;
      for (const SDValue &Op : N0->op_values())
        NewVecC.push_back(
            Op.isUndef() ? DAG.getConstant(0, DL, Op.getValueType()) : Op);
      return DAG.getBuildVector(VT, DL, NewVecC);
    }
  }

  SmallSet<SDValue, 8> MaybePoisonOperands;
  SmallVector<unsigned, 8> MaybePoisonOperandNumbers;
  for (auto [OpNo, Op] : enumerate(N0->ops())) {
    if (DAG.isGuaranteedNotToBeUndefOrPoison(Op, /*PoisonOnly*/ false,
                                             /*Depth*/ 1))
      continue;
    bool HadMaybePoisonOperands = !MaybePoisonOperands.empty();
    bool IsNewMaybePoisonOperand = MaybePoisonOperands.insert(Op).second;
    if (IsNewMaybePoisonOperand)
      MaybePoisonOperandNumbers.push_back(OpNo);
    if (!HadMaybePoisonOperands)
      continue;
    if (IsNewMaybePoisonOperand && !AllowMultipleMaybePoisonOperands) {
      // Multiple maybe-poison ops when not allowed - bail out.
      return SDValue();
    }
  }
  // NOTE: the whole op may be not guaranteed to not be undef or poison because
  // it could create undef or poison due to it's poison-generating flags.
  // So not finding any maybe-poison operands is fine.

  for (unsigned OpNo : MaybePoisonOperandNumbers) {
    // N0 can mutate during iteration, so make sure to refetch the maybe poison
    // operands via the operand numbers. The typical scenario is that we have
    // something like this
    //   t262: i32 = freeze t181
    //   t150: i32 = ctlz_zero_undef t262
    //   t184: i32 = ctlz_zero_undef t181
    //   t268: i32 = select_cc t181, Constant:i32<0>, t184, t186, setne:ch
    // When freezing the t181 operand we get t262 back, and then the
    // ReplaceAllUsesOfValueWith call will not only replace t181 by t262, but
    // also recursively replace t184 by t150.
    SDValue MaybePoisonOperand = N->getOperand(0).getOperand(OpNo);
    // Don't replace every single UNDEF everywhere with frozen UNDEF, though.
    if (MaybePoisonOperand.getOpcode() == ISD::UNDEF)
      continue;
    // First, freeze each offending operand.
    SDValue FrozenMaybePoisonOperand = DAG.getFreeze(MaybePoisonOperand);
    // Then, change all other uses of unfrozen operand to use frozen operand.
    DAG.ReplaceAllUsesOfValueWith(MaybePoisonOperand, FrozenMaybePoisonOperand);
    if (FrozenMaybePoisonOperand.getOpcode() == ISD::FREEZE &&
        FrozenMaybePoisonOperand.getOperand(0) == FrozenMaybePoisonOperand) {
      // But, that also updated the use in the freeze we just created, thus
      // creating a cycle in a DAG. Let's undo that by mutating the freeze.
      DAG.UpdateNodeOperands(FrozenMaybePoisonOperand.getNode(),
                             MaybePoisonOperand);
    }
  }

  // This node has been merged with another.
  if (N->getOpcode() == ISD::DELETED_NODE)
    return SDValue(N, 0);

  // The whole node may have been updated, so the value we were holding
  // may no longer be valid. Re-fetch the operand we're `freeze`ing.
  N0 = N->getOperand(0);

  // Finally, recreate the node, it's operands were updated to use
  // frozen operands, so we just need to use it's "original" operands.
  SmallVector<SDValue> Ops(N0->ops());
  // Special-handle ISD::UNDEF, each single one of them can be it's own thing.
  for (SDValue &Op : Ops) {
    if (Op.getOpcode() == ISD::UNDEF)
      Op = DAG.getFreeze(Op);
  }

  SDValue R;
  if (auto *SVN = dyn_cast<ShuffleVectorSDNode>(N0)) {
    // Special case handling for ShuffleVectorSDNode nodes.
    R = DAG.getVectorShuffle(N0.getValueType(), SDLoc(N0), Ops[0], Ops[1],
                             SVN->getMask());
  } else {
    // NOTE: this strips poison generating flags.
    R = DAG.getNode(N0.getOpcode(), SDLoc(N0), N0->getVTList(), Ops);
  }
  assert(DAG.isGuaranteedNotToBeUndefOrPoison(R, /*PoisonOnly*/ false) &&
         "Can't create node that may be undef/poison!");
  return R;
}

/// We know that BV is a build_vector node with Constant, ConstantFP or Undef
/// operands. DstEltVT indicates the destination element value type.
SDValue DAGCombiner::
ConstantFoldBITCASTofBUILD_VECTOR(SDNode *BV, EVT DstEltVT) {
  EVT SrcEltVT = BV->getValueType(0).getVectorElementType();

  // If this is already the right type, we're done.
  if (SrcEltVT == DstEltVT) return SDValue(BV, 0);

  unsigned SrcBitSize = SrcEltVT.getSizeInBits();
  unsigned DstBitSize = DstEltVT.getSizeInBits();

  // If this is a conversion of N elements of one type to N elements of another
  // type, convert each element.  This handles FP<->INT cases.
  if (SrcBitSize == DstBitSize) {
    SmallVector<SDValue, 8> Ops;
    for (SDValue Op : BV->op_values()) {
      // If the vector element type is not legal, the BUILD_VECTOR operands
      // are promoted and implicitly truncated.  Make that explicit here.
      if (Op.getValueType() != SrcEltVT)
        Op = DAG.getNode(ISD::TRUNCATE, SDLoc(BV), SrcEltVT, Op);
      Ops.push_back(DAG.getBitcast(DstEltVT, Op));
      AddToWorklist(Ops.back().getNode());
    }
    EVT VT = EVT::getVectorVT(*DAG.getContext(), DstEltVT,
                              BV->getValueType(0).getVectorNumElements());
    return DAG.getBuildVector(VT, SDLoc(BV), Ops);
  }

  // Otherwise, we're growing or shrinking the elements.  To avoid having to
  // handle annoying details of growing/shrinking FP values, we convert them to
  // int first.
  if (SrcEltVT.isFloatingPoint()) {
    // Convert the input float vector to a int vector where the elements are the
    // same sizes.
    EVT IntVT = EVT::getIntegerVT(*DAG.getContext(), SrcEltVT.getSizeInBits());
    BV = ConstantFoldBITCASTofBUILD_VECTOR(BV, IntVT).getNode();
    SrcEltVT = IntVT;
  }

  // Now we know the input is an integer vector.  If the output is a FP type,
  // convert to integer first, then to FP of the right size.
  if (DstEltVT.isFloatingPoint()) {
    EVT TmpVT = EVT::getIntegerVT(*DAG.getContext(), DstEltVT.getSizeInBits());
    SDNode *Tmp = ConstantFoldBITCASTofBUILD_VECTOR(BV, TmpVT).getNode();

    // Next, convert to FP elements of the same size.
    return ConstantFoldBITCASTofBUILD_VECTOR(Tmp, DstEltVT);
  }

  // Okay, we know the src/dst types are both integers of differing types.
  assert(SrcEltVT.isInteger() && DstEltVT.isInteger());

  // TODO: Should ConstantFoldBITCASTofBUILD_VECTOR always take a
  // BuildVectorSDNode?
  auto *BVN = cast<BuildVectorSDNode>(BV);

  // Extract the constant raw bit data.
  BitVector UndefElements;
  SmallVector<APInt> RawBits;
  bool IsLE = DAG.getDataLayout().isLittleEndian();
  if (!BVN->getConstantRawBits(IsLE, DstBitSize, RawBits, UndefElements))
    return SDValue();

  SDLoc DL(BV);
  SmallVector<SDValue, 8> Ops;
  for (unsigned I = 0, E = RawBits.size(); I != E; ++I) {
    if (UndefElements[I])
      Ops.push_back(DAG.getUNDEF(DstEltVT));
    else
      Ops.push_back(DAG.getConstant(RawBits[I], DL, DstEltVT));
  }

  EVT VT = EVT::getVectorVT(*DAG.getContext(), DstEltVT, Ops.size());
  return DAG.getBuildVector(VT, DL, Ops);
}

// Returns true if floating point contraction is allowed on the FMUL-SDValue
// `N`
static bool isContractableFMUL(const TargetOptions &Options, SDValue N) {
  assert(N.getOpcode() == ISD::FMUL);

  return Options.AllowFPOpFusion == FPOpFusion::Fast || Options.UnsafeFPMath ||
         N->getFlags().hasAllowContract();
}

// Returns true if `N` can assume no infinities involved in its computation.
static bool hasNoInfs(const TargetOptions &Options, SDValue N) {
  return Options.NoInfsFPMath || N->getFlags().hasNoInfs();
}

/// Try to perform FMA combining on a given FADD node.
template <class MatchContextClass>
SDValue DAGCombiner::visitFADDForFMACombine(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDLoc SL(N);
  MatchContextClass matcher(DAG, TLI, N);
  const TargetOptions &Options = DAG.getTarget().Options;

  bool UseVP = std::is_same_v<MatchContextClass, VPMatchContext>;

  // Floating-point multiply-add with intermediate rounding.
  // FIXME: Make isFMADLegal have specific behavior when using VPMatchContext.
  // FIXME: Add VP_FMAD opcode.
  bool HasFMAD = !UseVP && (LegalOperations && TLI.isFMADLegal(DAG, N));

  // Floating-point multiply-add without intermediate rounding.
  bool HasFMA =
      (!LegalOperations || matcher.isOperationLegalOrCustom(ISD::FMA, VT)) &&
      TLI.isFMAFasterThanFMulAndFAdd(DAG.getMachineFunction(), VT);

  // No valid opcode, do not combine.
  if (!HasFMAD && !HasFMA)
    return SDValue();

  bool AllowFusionGlobally = (Options.AllowFPOpFusion == FPOpFusion::Fast ||
                              Options.UnsafeFPMath || HasFMAD);
  // If the addition is not contractable, do not combine.
  if (!AllowFusionGlobally && !N->getFlags().hasAllowContract())
    return SDValue();

  // Folding fadd (fmul x, y), (fmul x, y) -> fma x, y, (fmul x, y) is never
  // beneficial. It does not reduce latency. It increases register pressure. It
  // replaces an fadd with an fma which is a more complex instruction, so is
  // likely to have a larger encoding, use more functional units, etc.
  if (N0 == N1)
    return SDValue();

  if (TLI.generateFMAsInMachineCombiner(VT, OptLevel))
    return SDValue();

  // Always prefer FMAD to FMA for precision.
  unsigned PreferredFusedOpcode = HasFMAD ? ISD::FMAD : ISD::FMA;
  bool Aggressive = TLI.enableAggressiveFMAFusion(VT);

  auto isFusedOp = [&](SDValue N) {
    return matcher.match(N, ISD::FMA) || matcher.match(N, ISD::FMAD);
  };

  // Is the node an FMUL and contractable either due to global flags or
  // SDNodeFlags.
  auto isContractableFMUL = [AllowFusionGlobally, &matcher](SDValue N) {
    if (!matcher.match(N, ISD::FMUL))
      return false;
    return AllowFusionGlobally || N->getFlags().hasAllowContract();
  };
  // If we have two choices trying to fold (fadd (fmul u, v), (fmul x, y)),
  // prefer to fold the multiply with fewer uses.
  if (Aggressive && isContractableFMUL(N0) && isContractableFMUL(N1)) {
    if (N0->use_size() > N1->use_size())
      std::swap(N0, N1);
  }

  // fold (fadd (fmul x, y), z) -> (fma x, y, z)
  if (isContractableFMUL(N0) && (Aggressive || N0->hasOneUse())) {
    return matcher.getNode(PreferredFusedOpcode, SL, VT, N0.getOperand(0),
                           N0.getOperand(1), N1);
  }

  // fold (fadd x, (fmul y, z)) -> (fma y, z, x)
  // Note: Commutes FADD operands.
  if (isContractableFMUL(N1) && (Aggressive || N1->hasOneUse())) {
    return matcher.getNode(PreferredFusedOpcode, SL, VT, N1.getOperand(0),
                           N1.getOperand(1), N0);
  }

  // fadd (fma A, B, (fmul C, D)), E --> fma A, B, (fma C, D, E)
  // fadd E, (fma A, B, (fmul C, D)) --> fma A, B, (fma C, D, E)
  // This also works with nested fma instructions:
  // fadd (fma A, B, (fma (C, D, (fmul (E, F))))), G -->
  // fma A, B, (fma C, D, fma (E, F, G))
  // fadd (G, (fma A, B, (fma (C, D, (fmul (E, F)))))) -->
  // fma A, B, (fma C, D, fma (E, F, G)).
  // This requires reassociation because it changes the order of operations.
  bool CanReassociate =
      Options.UnsafeFPMath || N->getFlags().hasAllowReassociation();
  if (CanReassociate) {
    SDValue FMA, E;
    if (isFusedOp(N0) && N0.hasOneUse()) {
      FMA = N0;
      E = N1;
    } else if (isFusedOp(N1) && N1.hasOneUse()) {
      FMA = N1;
      E = N0;
    }

    SDValue TmpFMA = FMA;
    while (E && isFusedOp(TmpFMA) && TmpFMA.hasOneUse()) {
      SDValue FMul = TmpFMA->getOperand(2);
      if (matcher.match(FMul, ISD::FMUL) && FMul.hasOneUse()) {
        SDValue C = FMul.getOperand(0);
        SDValue D = FMul.getOperand(1);
        SDValue CDE = matcher.getNode(PreferredFusedOpcode, SL, VT, C, D, E);
        DAG.ReplaceAllUsesOfValueWith(FMul, CDE);
        // Replacing the inner FMul could cause the outer FMA to be simplified
        // away.
        return FMA.getOpcode() == ISD::DELETED_NODE ? SDValue(N, 0) : FMA;
      }

      TmpFMA = TmpFMA->getOperand(2);
    }
  }

  // Look through FP_EXTEND nodes to do more combining.

  // fold (fadd (fpext (fmul x, y)), z) -> (fma (fpext x), (fpext y), z)
  if (matcher.match(N0, ISD::FP_EXTEND)) {
    SDValue N00 = N0.getOperand(0);
    if (isContractableFMUL(N00) &&
        TLI.isFPExtFoldable(DAG, PreferredFusedOpcode, VT,
                            N00.getValueType())) {
      return matcher.getNode(
          PreferredFusedOpcode, SL, VT,
          matcher.getNode(ISD::FP_EXTEND, SL, VT, N00.getOperand(0)),
          matcher.getNode(ISD::FP_EXTEND, SL, VT, N00.getOperand(1)), N1);
    }
  }

  // fold (fadd x, (fpext (fmul y, z))) -> (fma (fpext y), (fpext z), x)
  // Note: Commutes FADD operands.
  if (matcher.match(N1, ISD::FP_EXTEND)) {
    SDValue N10 = N1.getOperand(0);
    if (isContractableFMUL(N10) &&
        TLI.isFPExtFoldable(DAG, PreferredFusedOpcode, VT,
                            N10.getValueType())) {
      return matcher.getNode(
          PreferredFusedOpcode, SL, VT,
          matcher.getNode(ISD::FP_EXTEND, SL, VT, N10.getOperand(0)),
          matcher.getNode(ISD::FP_EXTEND, SL, VT, N10.getOperand(1)), N0);
    }
  }

  // More folding opportunities when target permits.
  if (Aggressive) {
    // fold (fadd (fma x, y, (fpext (fmul u, v))), z)
    //   -> (fma x, y, (fma (fpext u), (fpext v), z))
    auto FoldFAddFMAFPExtFMul = [&](SDValue X, SDValue Y, SDValue U, SDValue V,
                                    SDValue Z) {
      return matcher.getNode(
          PreferredFusedOpcode, SL, VT, X, Y,
          matcher.getNode(PreferredFusedOpcode, SL, VT,
                          matcher.getNode(ISD::FP_EXTEND, SL, VT, U),
                          matcher.getNode(ISD::FP_EXTEND, SL, VT, V), Z));
    };
    if (isFusedOp(N0)) {
      SDValue N02 = N0.getOperand(2);
      if (matcher.match(N02, ISD::FP_EXTEND)) {
        SDValue N020 = N02.getOperand(0);
        if (isContractableFMUL(N020) &&
            TLI.isFPExtFoldable(DAG, PreferredFusedOpcode, VT,
                                N020.getValueType())) {
          return FoldFAddFMAFPExtFMul(N0.getOperand(0), N0.getOperand(1),
                                      N020.getOperand(0), N020.getOperand(1),
                                      N1);
        }
      }
    }

    // fold (fadd (fpext (fma x, y, (fmul u, v))), z)
    //   -> (fma (fpext x), (fpext y), (fma (fpext u), (fpext v), z))
    // FIXME: This turns two single-precision and one double-precision
    // operation into two double-precision operations, which might not be
    // interesting for all targets, especially GPUs.
    auto FoldFAddFPExtFMAFMul = [&](SDValue X, SDValue Y, SDValue U, SDValue V,
                                    SDValue Z) {
      return matcher.getNode(
          PreferredFusedOpcode, SL, VT,
          matcher.getNode(ISD::FP_EXTEND, SL, VT, X),
          matcher.getNode(ISD::FP_EXTEND, SL, VT, Y),
          matcher.getNode(PreferredFusedOpcode, SL, VT,
                          matcher.getNode(ISD::FP_EXTEND, SL, VT, U),
                          matcher.getNode(ISD::FP_EXTEND, SL, VT, V), Z));
    };
    if (N0.getOpcode() == ISD::FP_EXTEND) {
      SDValue N00 = N0.getOperand(0);
      if (isFusedOp(N00)) {
        SDValue N002 = N00.getOperand(2);
        if (isContractableFMUL(N002) &&
            TLI.isFPExtFoldable(DAG, PreferredFusedOpcode, VT,
                                N00.getValueType())) {
          return FoldFAddFPExtFMAFMul(N00.getOperand(0), N00.getOperand(1),
                                      N002.getOperand(0), N002.getOperand(1),
                                      N1);
        }
      }
    }

    // fold (fadd x, (fma y, z, (fpext (fmul u, v)))
    //   -> (fma y, z, (fma (fpext u), (fpext v), x))
    if (isFusedOp(N1)) {
      SDValue N12 = N1.getOperand(2);
      if (N12.getOpcode() == ISD::FP_EXTEND) {
        SDValue N120 = N12.getOperand(0);
        if (isContractableFMUL(N120) &&
            TLI.isFPExtFoldable(DAG, PreferredFusedOpcode, VT,
                                N120.getValueType())) {
          return FoldFAddFMAFPExtFMul(N1.getOperand(0), N1.getOperand(1),
                                      N120.getOperand(0), N120.getOperand(1),
                                      N0);
        }
      }
    }

    // fold (fadd x, (fpext (fma y, z, (fmul u, v)))
    //   -> (fma (fpext y), (fpext z), (fma (fpext u), (fpext v), x))
    // FIXME: This turns two single-precision and one double-precision
    // operation into two double-precision operations, which might not be
    // interesting for all targets, especially GPUs.
    if (N1.getOpcode() == ISD::FP_EXTEND) {
      SDValue N10 = N1.getOperand(0);
      if (isFusedOp(N10)) {
        SDValue N102 = N10.getOperand(2);
        if (isContractableFMUL(N102) &&
            TLI.isFPExtFoldable(DAG, PreferredFusedOpcode, VT,
                                N10.getValueType())) {
          return FoldFAddFPExtFMAFMul(N10.getOperand(0), N10.getOperand(1),
                                      N102.getOperand(0), N102.getOperand(1),
                                      N0);
        }
      }
    }
  }

  return SDValue();
}

/// Try to perform FMA combining on a given FSUB node.
template <class MatchContextClass>
SDValue DAGCombiner::visitFSUBForFMACombine(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDLoc SL(N);
  MatchContextClass matcher(DAG, TLI, N);
  const TargetOptions &Options = DAG.getTarget().Options;

  bool UseVP = std::is_same_v<MatchContextClass, VPMatchContext>;

  // Floating-point multiply-add with intermediate rounding.
  // FIXME: Make isFMADLegal have specific behavior when using VPMatchContext.
  // FIXME: Add VP_FMAD opcode.
  bool HasFMAD = !UseVP && (LegalOperations && TLI.isFMADLegal(DAG, N));

  // Floating-point multiply-add without intermediate rounding.
  bool HasFMA =
      (!LegalOperations || matcher.isOperationLegalOrCustom(ISD::FMA, VT)) &&
      TLI.isFMAFasterThanFMulAndFAdd(DAG.getMachineFunction(), VT);

  // No valid opcode, do not combine.
  if (!HasFMAD && !HasFMA)
    return SDValue();

  const SDNodeFlags Flags = N->getFlags();
  bool AllowFusionGlobally = (Options.AllowFPOpFusion == FPOpFusion::Fast ||
                              Options.UnsafeFPMath || HasFMAD);

  // If the subtraction is not contractable, do not combine.
  if (!AllowFusionGlobally && !N->getFlags().hasAllowContract())
    return SDValue();

  if (TLI.generateFMAsInMachineCombiner(VT, OptLevel))
    return SDValue();

  // Always prefer FMAD to FMA for precision.
  unsigned PreferredFusedOpcode = HasFMAD ? ISD::FMAD : ISD::FMA;
  bool Aggressive = TLI.enableAggressiveFMAFusion(VT);
  bool NoSignedZero = Options.NoSignedZerosFPMath || Flags.hasNoSignedZeros();

  // Is the node an FMUL and contractable either due to global flags or
  // SDNodeFlags.
  auto isContractableFMUL = [AllowFusionGlobally, &matcher](SDValue N) {
    if (!matcher.match(N, ISD::FMUL))
      return false;
    return AllowFusionGlobally || N->getFlags().hasAllowContract();
  };

  // fold (fsub (fmul x, y), z) -> (fma x, y, (fneg z))
  auto tryToFoldXYSubZ = [&](SDValue XY, SDValue Z) {
    if (isContractableFMUL(XY) && (Aggressive || XY->hasOneUse())) {
      return matcher.getNode(PreferredFusedOpcode, SL, VT, XY.getOperand(0),
                             XY.getOperand(1),
                             matcher.getNode(ISD::FNEG, SL, VT, Z));
    }
    return SDValue();
  };

  // fold (fsub x, (fmul y, z)) -> (fma (fneg y), z, x)
  // Note: Commutes FSUB operands.
  auto tryToFoldXSubYZ = [&](SDValue X, SDValue YZ) {
    if (isContractableFMUL(YZ) && (Aggressive || YZ->hasOneUse())) {
      return matcher.getNode(
          PreferredFusedOpcode, SL, VT,
          matcher.getNode(ISD::FNEG, SL, VT, YZ.getOperand(0)),
          YZ.getOperand(1), X);
    }
    return SDValue();
  };

  // If we have two choices trying to fold (fsub (fmul u, v), (fmul x, y)),
  // prefer to fold the multiply with fewer uses.
  if (isContractableFMUL(N0) && isContractableFMUL(N1) &&
      (N0->use_size() > N1->use_size())) {
    // fold (fsub (fmul a, b), (fmul c, d)) -> (fma (fneg c), d, (fmul a, b))
    if (SDValue V = tryToFoldXSubYZ(N0, N1))
      return V;
    // fold (fsub (fmul a, b), (fmul c, d)) -> (fma a, b, (fneg (fmul c, d)))
    if (SDValue V = tryToFoldXYSubZ(N0, N1))
      return V;
  } else {
    // fold (fsub (fmul x, y), z) -> (fma x, y, (fneg z))
    if (SDValue V = tryToFoldXYSubZ(N0, N1))
      return V;
    // fold (fsub x, (fmul y, z)) -> (fma (fneg y), z, x)
    if (SDValue V = tryToFoldXSubYZ(N0, N1))
      return V;
  }

  // fold (fsub (fneg (fmul, x, y)), z) -> (fma (fneg x), y, (fneg z))
  if (matcher.match(N0, ISD::FNEG) && isContractableFMUL(N0.getOperand(0)) &&
      (Aggressive || (N0->hasOneUse() && N0.getOperand(0).hasOneUse()))) {
    SDValue N00 = N0.getOperand(0).getOperand(0);
    SDValue N01 = N0.getOperand(0).getOperand(1);
    return matcher.getNode(PreferredFusedOpcode, SL, VT,
                           matcher.getNode(ISD::FNEG, SL, VT, N00), N01,
                           matcher.getNode(ISD::FNEG, SL, VT, N1));
  }

  // Look through FP_EXTEND nodes to do more combining.

  // fold (fsub (fpext (fmul x, y)), z)
  //   -> (fma (fpext x), (fpext y), (fneg z))
  if (matcher.match(N0, ISD::FP_EXTEND)) {
    SDValue N00 = N0.getOperand(0);
    if (isContractableFMUL(N00) &&
        TLI.isFPExtFoldable(DAG, PreferredFusedOpcode, VT,
                            N00.getValueType())) {
      return matcher.getNode(
          PreferredFusedOpcode, SL, VT,
          matcher.getNode(ISD::FP_EXTEND, SL, VT, N00.getOperand(0)),
          matcher.getNode(ISD::FP_EXTEND, SL, VT, N00.getOperand(1)),
          matcher.getNode(ISD::FNEG, SL, VT, N1));
    }
  }

  // fold (fsub x, (fpext (fmul y, z)))
  //   -> (fma (fneg (fpext y)), (fpext z), x)
  // Note: Commutes FSUB operands.
  if (matcher.match(N1, ISD::FP_EXTEND)) {
    SDValue N10 = N1.getOperand(0);
    if (isContractableFMUL(N10) &&
        TLI.isFPExtFoldable(DAG, PreferredFusedOpcode, VT,
                            N10.getValueType())) {
      return matcher.getNode(
          PreferredFusedOpcode, SL, VT,
          matcher.getNode(
              ISD::FNEG, SL, VT,
              matcher.getNode(ISD::FP_EXTEND, SL, VT, N10.getOperand(0))),
          matcher.getNode(ISD::FP_EXTEND, SL, VT, N10.getOperand(1)), N0);
    }
  }

  // fold (fsub (fpext (fneg (fmul, x, y))), z)
  //   -> (fneg (fma (fpext x), (fpext y), z))
  // Note: This could be removed with appropriate canonicalization of the
  // input expression into (fneg (fadd (fpext (fmul, x, y)), z). However, the
  // orthogonal flags -fp-contract=fast and -enable-unsafe-fp-math prevent
  // from implementing the canonicalization in visitFSUB.
  if (matcher.match(N0, ISD::FP_EXTEND)) {
    SDValue N00 = N0.getOperand(0);
    if (matcher.match(N00, ISD::FNEG)) {
      SDValue N000 = N00.getOperand(0);
      if (isContractableFMUL(N000) &&
          TLI.isFPExtFoldable(DAG, PreferredFusedOpcode, VT,
                              N00.getValueType())) {
        return matcher.getNode(
            ISD::FNEG, SL, VT,
            matcher.getNode(
                PreferredFusedOpcode, SL, VT,
                matcher.getNode(ISD::FP_EXTEND, SL, VT, N000.getOperand(0)),
                matcher.getNode(ISD::FP_EXTEND, SL, VT, N000.getOperand(1)),
                N1));
      }
    }
  }

  // fold (fsub (fneg (fpext (fmul, x, y))), z)
  //   -> (fneg (fma (fpext x)), (fpext y), z)
  // Note: This could be removed with appropriate canonicalization of the
  // input expression into (fneg (fadd (fpext (fmul, x, y)), z). However, the
  // orthogonal flags -fp-contract=fast and -enable-unsafe-fp-math prevent
  // from implementing the canonicalization in visitFSUB.
  if (matcher.match(N0, ISD::FNEG)) {
    SDValue N00 = N0.getOperand(0);
    if (matcher.match(N00, ISD::FP_EXTEND)) {
      SDValue N000 = N00.getOperand(0);
      if (isContractableFMUL(N000) &&
          TLI.isFPExtFoldable(DAG, PreferredFusedOpcode, VT,
                              N000.getValueType())) {
        return matcher.getNode(
            ISD::FNEG, SL, VT,
            matcher.getNode(
                PreferredFusedOpcode, SL, VT,
                matcher.getNode(ISD::FP_EXTEND, SL, VT, N000.getOperand(0)),
                matcher.getNode(ISD::FP_EXTEND, SL, VT, N000.getOperand(1)),
                N1));
      }
    }
  }

  auto isReassociable = [&Options](SDNode *N) {
    return Options.UnsafeFPMath || N->getFlags().hasAllowReassociation();
  };

  auto isContractableAndReassociableFMUL = [&isContractableFMUL,
                                            &isReassociable](SDValue N) {
    return isContractableFMUL(N) && isReassociable(N.getNode());
  };

  auto isFusedOp = [&](SDValue N) {
    return matcher.match(N, ISD::FMA) || matcher.match(N, ISD::FMAD);
  };

  // More folding opportunities when target permits.
  if (Aggressive && isReassociable(N)) {
    bool CanFuse = Options.UnsafeFPMath || N->getFlags().hasAllowContract();
    // fold (fsub (fma x, y, (fmul u, v)), z)
    //   -> (fma x, y (fma u, v, (fneg z)))
    if (CanFuse && isFusedOp(N0) &&
        isContractableAndReassociableFMUL(N0.getOperand(2)) &&
        N0->hasOneUse() && N0.getOperand(2)->hasOneUse()) {
      return matcher.getNode(
          PreferredFusedOpcode, SL, VT, N0.getOperand(0), N0.getOperand(1),
          matcher.getNode(PreferredFusedOpcode, SL, VT,
                          N0.getOperand(2).getOperand(0),
                          N0.getOperand(2).getOperand(1),
                          matcher.getNode(ISD::FNEG, SL, VT, N1)));
    }

    // fold (fsub x, (fma y, z, (fmul u, v)))
    //   -> (fma (fneg y), z, (fma (fneg u), v, x))
    if (CanFuse && isFusedOp(N1) &&
        isContractableAndReassociableFMUL(N1.getOperand(2)) &&
        N1->hasOneUse() && NoSignedZero) {
      SDValue N20 = N1.getOperand(2).getOperand(0);
      SDValue N21 = N1.getOperand(2).getOperand(1);
      return matcher.getNode(
          PreferredFusedOpcode, SL, VT,
          matcher.getNode(ISD::FNEG, SL, VT, N1.getOperand(0)),
          N1.getOperand(1),
          matcher.getNode(PreferredFusedOpcode, SL, VT,
                          matcher.getNode(ISD::FNEG, SL, VT, N20), N21, N0));
    }

    // fold (fsub (fma x, y, (fpext (fmul u, v))), z)
    //   -> (fma x, y (fma (fpext u), (fpext v), (fneg z)))
    if (isFusedOp(N0) && N0->hasOneUse()) {
      SDValue N02 = N0.getOperand(2);
      if (matcher.match(N02, ISD::FP_EXTEND)) {
        SDValue N020 = N02.getOperand(0);
        if (isContractableAndReassociableFMUL(N020) &&
            TLI.isFPExtFoldable(DAG, PreferredFusedOpcode, VT,
                                N020.getValueType())) {
          return matcher.getNode(
              PreferredFusedOpcode, SL, VT, N0.getOperand(0), N0.getOperand(1),
              matcher.getNode(
                  PreferredFusedOpcode, SL, VT,
                  matcher.getNode(ISD::FP_EXTEND, SL, VT, N020.getOperand(0)),
                  matcher.getNode(ISD::FP_EXTEND, SL, VT, N020.getOperand(1)),
                  matcher.getNode(ISD::FNEG, SL, VT, N1)));
        }
      }
    }

    // fold (fsub (fpext (fma x, y, (fmul u, v))), z)
    //   -> (fma (fpext x), (fpext y),
    //           (fma (fpext u), (fpext v), (fneg z)))
    // FIXME: This turns two single-precision and one double-precision
    // operation into two double-precision operations, which might not be
    // interesting for all targets, especially GPUs.
    if (matcher.match(N0, ISD::FP_EXTEND)) {
      SDValue N00 = N0.getOperand(0);
      if (isFusedOp(N00)) {
        SDValue N002 = N00.getOperand(2);
        if (isContractableAndReassociableFMUL(N002) &&
            TLI.isFPExtFoldable(DAG, PreferredFusedOpcode, VT,
                                N00.getValueType())) {
          return matcher.getNode(
              PreferredFusedOpcode, SL, VT,
              matcher.getNode(ISD::FP_EXTEND, SL, VT, N00.getOperand(0)),
              matcher.getNode(ISD::FP_EXTEND, SL, VT, N00.getOperand(1)),
              matcher.getNode(
                  PreferredFusedOpcode, SL, VT,
                  matcher.getNode(ISD::FP_EXTEND, SL, VT, N002.getOperand(0)),
                  matcher.getNode(ISD::FP_EXTEND, SL, VT, N002.getOperand(1)),
                  matcher.getNode(ISD::FNEG, SL, VT, N1)));
        }
      }
    }

    // fold (fsub x, (fma y, z, (fpext (fmul u, v))))
    //   -> (fma (fneg y), z, (fma (fneg (fpext u)), (fpext v), x))
    if (isFusedOp(N1) && matcher.match(N1.getOperand(2), ISD::FP_EXTEND) &&
        N1->hasOneUse()) {
      SDValue N120 = N1.getOperand(2).getOperand(0);
      if (isContractableAndReassociableFMUL(N120) &&
          TLI.isFPExtFoldable(DAG, PreferredFusedOpcode, VT,
                              N120.getValueType())) {
        SDValue N1200 = N120.getOperand(0);
        SDValue N1201 = N120.getOperand(1);
        return matcher.getNode(
            PreferredFusedOpcode, SL, VT,
            matcher.getNode(ISD::FNEG, SL, VT, N1.getOperand(0)),
            N1.getOperand(1),
            matcher.getNode(
                PreferredFusedOpcode, SL, VT,
                matcher.getNode(ISD::FNEG, SL, VT,
                                matcher.getNode(ISD::FP_EXTEND, SL, VT, N1200)),
                matcher.getNode(ISD::FP_EXTEND, SL, VT, N1201), N0));
      }
    }

    // fold (fsub x, (fpext (fma y, z, (fmul u, v))))
    //   -> (fma (fneg (fpext y)), (fpext z),
    //           (fma (fneg (fpext u)), (fpext v), x))
    // FIXME: This turns two single-precision and one double-precision
    // operation into two double-precision operations, which might not be
    // interesting for all targets, especially GPUs.
    if (matcher.match(N1, ISD::FP_EXTEND) && isFusedOp(N1.getOperand(0))) {
      SDValue CvtSrc = N1.getOperand(0);
      SDValue N100 = CvtSrc.getOperand(0);
      SDValue N101 = CvtSrc.getOperand(1);
      SDValue N102 = CvtSrc.getOperand(2);
      if (isContractableAndReassociableFMUL(N102) &&
          TLI.isFPExtFoldable(DAG, PreferredFusedOpcode, VT,
                              CvtSrc.getValueType())) {
        SDValue N1020 = N102.getOperand(0);
        SDValue N1021 = N102.getOperand(1);
        return matcher.getNode(
            PreferredFusedOpcode, SL, VT,
            matcher.getNode(ISD::FNEG, SL, VT,
                            matcher.getNode(ISD::FP_EXTEND, SL, VT, N100)),
            matcher.getNode(ISD::FP_EXTEND, SL, VT, N101),
            matcher.getNode(
                PreferredFusedOpcode, SL, VT,
                matcher.getNode(ISD::FNEG, SL, VT,
                                matcher.getNode(ISD::FP_EXTEND, SL, VT, N1020)),
                matcher.getNode(ISD::FP_EXTEND, SL, VT, N1021), N0));
      }
    }
  }

  return SDValue();
}

/// Try to perform FMA combining on a given FMUL node based on the distributive
/// law x * (y + 1) = x * y + x and variants thereof (commuted versions,
/// subtraction instead of addition).
SDValue DAGCombiner::visitFMULForFMADistributiveCombine(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDLoc SL(N);

  assert(N->getOpcode() == ISD::FMUL && "Expected FMUL Operation");

  const TargetOptions &Options = DAG.getTarget().Options;

  // The transforms below are incorrect when x == 0 and y == inf, because the
  // intermediate multiplication produces a nan.
  SDValue FAdd = N0.getOpcode() == ISD::FADD ? N0 : N1;
  if (!hasNoInfs(Options, FAdd))
    return SDValue();

  // Floating-point multiply-add without intermediate rounding.
  bool HasFMA =
      isContractableFMUL(Options, SDValue(N, 0)) &&
      (!LegalOperations || TLI.isOperationLegalOrCustom(ISD::FMA, VT)) &&
      TLI.isFMAFasterThanFMulAndFAdd(DAG.getMachineFunction(), VT);

  // Floating-point multiply-add with intermediate rounding. This can result
  // in a less precise result due to the changed rounding order.
  bool HasFMAD = Options.UnsafeFPMath &&
                 (LegalOperations && TLI.isFMADLegal(DAG, N));

  // No valid opcode, do not combine.
  if (!HasFMAD && !HasFMA)
    return SDValue();

  // Always prefer FMAD to FMA for precision.
  unsigned PreferredFusedOpcode = HasFMAD ? ISD::FMAD : ISD::FMA;
  bool Aggressive = TLI.enableAggressiveFMAFusion(VT);

  // fold (fmul (fadd x0, +1.0), y) -> (fma x0, y, y)
  // fold (fmul (fadd x0, -1.0), y) -> (fma x0, y, (fneg y))
  auto FuseFADD = [&](SDValue X, SDValue Y) {
    if (X.getOpcode() == ISD::FADD && (Aggressive || X->hasOneUse())) {
      if (auto *C = isConstOrConstSplatFP(X.getOperand(1), true)) {
        if (C->isExactlyValue(+1.0))
          return DAG.getNode(PreferredFusedOpcode, SL, VT, X.getOperand(0), Y,
                             Y);
        if (C->isExactlyValue(-1.0))
          return DAG.getNode(PreferredFusedOpcode, SL, VT, X.getOperand(0), Y,
                             DAG.getNode(ISD::FNEG, SL, VT, Y));
      }
    }
    return SDValue();
  };

  if (SDValue FMA = FuseFADD(N0, N1))
    return FMA;
  if (SDValue FMA = FuseFADD(N1, N0))
    return FMA;

  // fold (fmul (fsub +1.0, x1), y) -> (fma (fneg x1), y, y)
  // fold (fmul (fsub -1.0, x1), y) -> (fma (fneg x1), y, (fneg y))
  // fold (fmul (fsub x0, +1.0), y) -> (fma x0, y, (fneg y))
  // fold (fmul (fsub x0, -1.0), y) -> (fma x0, y, y)
  auto FuseFSUB = [&](SDValue X, SDValue Y) {
    if (X.getOpcode() == ISD::FSUB && (Aggressive || X->hasOneUse())) {
      if (auto *C0 = isConstOrConstSplatFP(X.getOperand(0), true)) {
        if (C0->isExactlyValue(+1.0))
          return DAG.getNode(PreferredFusedOpcode, SL, VT,
                             DAG.getNode(ISD::FNEG, SL, VT, X.getOperand(1)), Y,
                             Y);
        if (C0->isExactlyValue(-1.0))
          return DAG.getNode(PreferredFusedOpcode, SL, VT,
                             DAG.getNode(ISD::FNEG, SL, VT, X.getOperand(1)), Y,
                             DAG.getNode(ISD::FNEG, SL, VT, Y));
      }
      if (auto *C1 = isConstOrConstSplatFP(X.getOperand(1), true)) {
        if (C1->isExactlyValue(+1.0))
          return DAG.getNode(PreferredFusedOpcode, SL, VT, X.getOperand(0), Y,
                             DAG.getNode(ISD::FNEG, SL, VT, Y));
        if (C1->isExactlyValue(-1.0))
          return DAG.getNode(PreferredFusedOpcode, SL, VT, X.getOperand(0), Y,
                             Y);
      }
    }
    return SDValue();
  };

  if (SDValue FMA = FuseFSUB(N0, N1))
    return FMA;
  if (SDValue FMA = FuseFSUB(N1, N0))
    return FMA;

  return SDValue();
}

SDValue DAGCombiner::visitVP_FADD(SDNode *N) {
  SelectionDAG::FlagInserter FlagsInserter(DAG, N);

  // FADD -> FMA combines:
  if (SDValue Fused = visitFADDForFMACombine<VPMatchContext>(N)) {
    if (Fused.getOpcode() != ISD::DELETED_NODE)
      AddToWorklist(Fused.getNode());
    return Fused;
  }
  return SDValue();
}

SDValue DAGCombiner::visitFADD(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  bool N0CFP = DAG.isConstantFPBuildVectorOrConstantFP(N0);
  bool N1CFP = DAG.isConstantFPBuildVectorOrConstantFP(N1);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);
  const TargetOptions &Options = DAG.getTarget().Options;
  SDNodeFlags Flags = N->getFlags();
  SelectionDAG::FlagInserter FlagsInserter(DAG, N);

  if (SDValue R = DAG.simplifyFPBinop(N->getOpcode(), N0, N1, Flags))
    return R;

  // fold (fadd c1, c2) -> c1 + c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FADD, DL, VT, {N0, N1}))
    return C;

  // canonicalize constant to RHS
  if (N0CFP && !N1CFP)
    return DAG.getNode(ISD::FADD, DL, VT, N1, N0);

  // fold vector ops
  if (VT.isVector())
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

  // N0 + -0.0 --> N0 (also allowed with +0.0 and fast-math)
  ConstantFPSDNode *N1C = isConstOrConstSplatFP(N1, true);
  if (N1C && N1C->isZero())
    if (N1C->isNegative() || Options.NoSignedZerosFPMath || Flags.hasNoSignedZeros())
      return N0;

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  // fold (fadd A, (fneg B)) -> (fsub A, B)
  if (!LegalOperations || TLI.isOperationLegalOrCustom(ISD::FSUB, VT))
    if (SDValue NegN1 = TLI.getCheaperNegatedExpression(
            N1, DAG, LegalOperations, ForCodeSize))
      return DAG.getNode(ISD::FSUB, DL, VT, N0, NegN1);

  // fold (fadd (fneg A), B) -> (fsub B, A)
  if (!LegalOperations || TLI.isOperationLegalOrCustom(ISD::FSUB, VT))
    if (SDValue NegN0 = TLI.getCheaperNegatedExpression(
            N0, DAG, LegalOperations, ForCodeSize))
      return DAG.getNode(ISD::FSUB, DL, VT, N1, NegN0);

  auto isFMulNegTwo = [](SDValue FMul) {
    if (!FMul.hasOneUse() || FMul.getOpcode() != ISD::FMUL)
      return false;
    auto *C = isConstOrConstSplatFP(FMul.getOperand(1), true);
    return C && C->isExactlyValue(-2.0);
  };

  // fadd (fmul B, -2.0), A --> fsub A, (fadd B, B)
  if (isFMulNegTwo(N0)) {
    SDValue B = N0.getOperand(0);
    SDValue Add = DAG.getNode(ISD::FADD, DL, VT, B, B);
    return DAG.getNode(ISD::FSUB, DL, VT, N1, Add);
  }
  // fadd A, (fmul B, -2.0) --> fsub A, (fadd B, B)
  if (isFMulNegTwo(N1)) {
    SDValue B = N1.getOperand(0);
    SDValue Add = DAG.getNode(ISD::FADD, DL, VT, B, B);
    return DAG.getNode(ISD::FSUB, DL, VT, N0, Add);
  }

  // No FP constant should be created after legalization as Instruction
  // Selection pass has a hard time dealing with FP constants.
  bool AllowNewConst = (Level < AfterLegalizeDAG);

  // If nnan is enabled, fold lots of things.
  if ((Options.NoNaNsFPMath || Flags.hasNoNaNs()) && AllowNewConst) {
    // If allowed, fold (fadd (fneg x), x) -> 0.0
    if (N0.getOpcode() == ISD::FNEG && N0.getOperand(0) == N1)
      return DAG.getConstantFP(0.0, DL, VT);

    // If allowed, fold (fadd x, (fneg x)) -> 0.0
    if (N1.getOpcode() == ISD::FNEG && N1.getOperand(0) == N0)
      return DAG.getConstantFP(0.0, DL, VT);
  }

  // If 'unsafe math' or reassoc and nsz, fold lots of things.
  // TODO: break out portions of the transformations below for which Unsafe is
  //       considered and which do not require both nsz and reassoc
  if (((Options.UnsafeFPMath && Options.NoSignedZerosFPMath) ||
       (Flags.hasAllowReassociation() && Flags.hasNoSignedZeros())) &&
      AllowNewConst) {
    // fadd (fadd x, c1), c2 -> fadd x, c1 + c2
    if (N1CFP && N0.getOpcode() == ISD::FADD &&
        DAG.isConstantFPBuildVectorOrConstantFP(N0.getOperand(1))) {
      SDValue NewC = DAG.getNode(ISD::FADD, DL, VT, N0.getOperand(1), N1);
      return DAG.getNode(ISD::FADD, DL, VT, N0.getOperand(0), NewC);
    }

    // We can fold chains of FADD's of the same value into multiplications.
    // This transform is not safe in general because we are reducing the number
    // of rounding steps.
    if (TLI.isOperationLegalOrCustom(ISD::FMUL, VT) && !N0CFP && !N1CFP) {
      if (N0.getOpcode() == ISD::FMUL) {
        bool CFP00 = DAG.isConstantFPBuildVectorOrConstantFP(N0.getOperand(0));
        bool CFP01 = DAG.isConstantFPBuildVectorOrConstantFP(N0.getOperand(1));

        // (fadd (fmul x, c), x) -> (fmul x, c+1)
        if (CFP01 && !CFP00 && N0.getOperand(0) == N1) {
          SDValue NewCFP = DAG.getNode(ISD::FADD, DL, VT, N0.getOperand(1),
                                       DAG.getConstantFP(1.0, DL, VT));
          return DAG.getNode(ISD::FMUL, DL, VT, N1, NewCFP);
        }

        // (fadd (fmul x, c), (fadd x, x)) -> (fmul x, c+2)
        if (CFP01 && !CFP00 && N1.getOpcode() == ISD::FADD &&
            N1.getOperand(0) == N1.getOperand(1) &&
            N0.getOperand(0) == N1.getOperand(0)) {
          SDValue NewCFP = DAG.getNode(ISD::FADD, DL, VT, N0.getOperand(1),
                                       DAG.getConstantFP(2.0, DL, VT));
          return DAG.getNode(ISD::FMUL, DL, VT, N0.getOperand(0), NewCFP);
        }
      }

      if (N1.getOpcode() == ISD::FMUL) {
        bool CFP10 = DAG.isConstantFPBuildVectorOrConstantFP(N1.getOperand(0));
        bool CFP11 = DAG.isConstantFPBuildVectorOrConstantFP(N1.getOperand(1));

        // (fadd x, (fmul x, c)) -> (fmul x, c+1)
        if (CFP11 && !CFP10 && N1.getOperand(0) == N0) {
          SDValue NewCFP = DAG.getNode(ISD::FADD, DL, VT, N1.getOperand(1),
                                       DAG.getConstantFP(1.0, DL, VT));
          return DAG.getNode(ISD::FMUL, DL, VT, N0, NewCFP);
        }

        // (fadd (fadd x, x), (fmul x, c)) -> (fmul x, c+2)
        if (CFP11 && !CFP10 && N0.getOpcode() == ISD::FADD &&
            N0.getOperand(0) == N0.getOperand(1) &&
            N1.getOperand(0) == N0.getOperand(0)) {
          SDValue NewCFP = DAG.getNode(ISD::FADD, DL, VT, N1.getOperand(1),
                                       DAG.getConstantFP(2.0, DL, VT));
          return DAG.getNode(ISD::FMUL, DL, VT, N1.getOperand(0), NewCFP);
        }
      }

      if (N0.getOpcode() == ISD::FADD) {
        bool CFP00 = DAG.isConstantFPBuildVectorOrConstantFP(N0.getOperand(0));
        // (fadd (fadd x, x), x) -> (fmul x, 3.0)
        if (!CFP00 && N0.getOperand(0) == N0.getOperand(1) &&
            (N0.getOperand(0) == N1)) {
          return DAG.getNode(ISD::FMUL, DL, VT, N1,
                             DAG.getConstantFP(3.0, DL, VT));
        }
      }

      if (N1.getOpcode() == ISD::FADD) {
        bool CFP10 = DAG.isConstantFPBuildVectorOrConstantFP(N1.getOperand(0));
        // (fadd x, (fadd x, x)) -> (fmul x, 3.0)
        if (!CFP10 && N1.getOperand(0) == N1.getOperand(1) &&
            N1.getOperand(0) == N0) {
          return DAG.getNode(ISD::FMUL, DL, VT, N0,
                             DAG.getConstantFP(3.0, DL, VT));
        }
      }

      // (fadd (fadd x, x), (fadd x, x)) -> (fmul x, 4.0)
      if (N0.getOpcode() == ISD::FADD && N1.getOpcode() == ISD::FADD &&
          N0.getOperand(0) == N0.getOperand(1) &&
          N1.getOperand(0) == N1.getOperand(1) &&
          N0.getOperand(0) == N1.getOperand(0)) {
        return DAG.getNode(ISD::FMUL, DL, VT, N0.getOperand(0),
                           DAG.getConstantFP(4.0, DL, VT));
      }
    }

    // Fold fadd(vecreduce(x), vecreduce(y)) -> vecreduce(fadd(x, y))
    if (SDValue SD = reassociateReduction(ISD::VECREDUCE_FADD, ISD::FADD, DL,
                                          VT, N0, N1, Flags))
      return SD;
  } // enable-unsafe-fp-math

  // FADD -> FMA combines:
  if (SDValue Fused = visitFADDForFMACombine<EmptyMatchContext>(N)) {
    if (Fused.getOpcode() != ISD::DELETED_NODE)
      AddToWorklist(Fused.getNode());
    return Fused;
  }
  return SDValue();
}

SDValue DAGCombiner::visitSTRICT_FADD(SDNode *N) {
  SDValue Chain = N->getOperand(0);
  SDValue N0 = N->getOperand(1);
  SDValue N1 = N->getOperand(2);
  EVT VT = N->getValueType(0);
  EVT ChainVT = N->getValueType(1);
  SDLoc DL(N);
  SelectionDAG::FlagInserter FlagsInserter(DAG, N);

  // fold (strict_fadd A, (fneg B)) -> (strict_fsub A, B)
  if (!LegalOperations || TLI.isOperationLegalOrCustom(ISD::STRICT_FSUB, VT))
    if (SDValue NegN1 = TLI.getCheaperNegatedExpression(
            N1, DAG, LegalOperations, ForCodeSize)) {
      return DAG.getNode(ISD::STRICT_FSUB, DL, DAG.getVTList(VT, ChainVT),
                         {Chain, N0, NegN1});
    }

  // fold (strict_fadd (fneg A), B) -> (strict_fsub B, A)
  if (!LegalOperations || TLI.isOperationLegalOrCustom(ISD::STRICT_FSUB, VT))
    if (SDValue NegN0 = TLI.getCheaperNegatedExpression(
            N0, DAG, LegalOperations, ForCodeSize)) {
      return DAG.getNode(ISD::STRICT_FSUB, DL, DAG.getVTList(VT, ChainVT),
                         {Chain, N1, NegN0});
    }
  return SDValue();
}

SDValue DAGCombiner::visitFSUB(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  ConstantFPSDNode *N0CFP = isConstOrConstSplatFP(N0, true);
  ConstantFPSDNode *N1CFP = isConstOrConstSplatFP(N1, true);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);
  const TargetOptions &Options = DAG.getTarget().Options;
  const SDNodeFlags Flags = N->getFlags();
  SelectionDAG::FlagInserter FlagsInserter(DAG, N);

  if (SDValue R = DAG.simplifyFPBinop(N->getOpcode(), N0, N1, Flags))
    return R;

  // fold (fsub c1, c2) -> c1-c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FSUB, DL, VT, {N0, N1}))
    return C;

  // fold vector ops
  if (VT.isVector())
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  // (fsub A, 0) -> A
  if (N1CFP && N1CFP->isZero()) {
    if (!N1CFP->isNegative() || Options.NoSignedZerosFPMath ||
        Flags.hasNoSignedZeros()) {
      return N0;
    }
  }

  if (N0 == N1) {
    // (fsub x, x) -> 0.0
    if (Options.NoNaNsFPMath || Flags.hasNoNaNs())
      return DAG.getConstantFP(0.0f, DL, VT);
  }

  // (fsub -0.0, N1) -> -N1
  if (N0CFP && N0CFP->isZero()) {
    if (N0CFP->isNegative() ||
        (Options.NoSignedZerosFPMath || Flags.hasNoSignedZeros())) {
      // We cannot replace an FSUB(+-0.0,X) with FNEG(X) when denormals are
      // flushed to zero, unless all users treat denorms as zero (DAZ).
      // FIXME: This transform will change the sign of a NaN and the behavior
      // of a signaling NaN. It is only valid when a NoNaN flag is present.
      DenormalMode DenormMode = DAG.getDenormalMode(VT);
      if (DenormMode == DenormalMode::getIEEE()) {
        if (SDValue NegN1 =
                TLI.getNegatedExpression(N1, DAG, LegalOperations, ForCodeSize))
          return NegN1;
        if (!LegalOperations || TLI.isOperationLegal(ISD::FNEG, VT))
          return DAG.getNode(ISD::FNEG, DL, VT, N1);
      }
    }
  }

  if (((Options.UnsafeFPMath && Options.NoSignedZerosFPMath) ||
       (Flags.hasAllowReassociation() && Flags.hasNoSignedZeros())) &&
      N1.getOpcode() == ISD::FADD) {
    // X - (X + Y) -> -Y
    if (N0 == N1->getOperand(0))
      return DAG.getNode(ISD::FNEG, DL, VT, N1->getOperand(1));
    // X - (Y + X) -> -Y
    if (N0 == N1->getOperand(1))
      return DAG.getNode(ISD::FNEG, DL, VT, N1->getOperand(0));
  }

  // fold (fsub A, (fneg B)) -> (fadd A, B)
  if (SDValue NegN1 =
          TLI.getNegatedExpression(N1, DAG, LegalOperations, ForCodeSize))
    return DAG.getNode(ISD::FADD, DL, VT, N0, NegN1);

  // FSUB -> FMA combines:
  if (SDValue Fused = visitFSUBForFMACombine<EmptyMatchContext>(N)) {
    AddToWorklist(Fused.getNode());
    return Fused;
  }

  return SDValue();
}

// Transform IEEE Floats:
//      (fmul C, (uitofp Pow2))
//          -> (bitcast_to_FP (add (bitcast_to_INT C), Log2(Pow2) << mantissa))
//      (fdiv C, (uitofp Pow2))
//          -> (bitcast_to_FP (sub (bitcast_to_INT C), Log2(Pow2) << mantissa))
//
// The rationale is fmul/fdiv by a power of 2 is just change the exponent, so
// there is no need for more than an add/sub.
//
// This is valid under the following circumstances:
// 1) We are dealing with IEEE floats
// 2) C is normal
// 3) The fmul/fdiv add/sub will not go outside of min/max exponent bounds.
// TODO: Much of this could also be used for generating `ldexp` on targets the
// prefer it.
SDValue DAGCombiner::combineFMulOrFDivWithIntPow2(SDNode *N) {
  EVT VT = N->getValueType(0);
  SDValue ConstOp, Pow2Op;

  std::optional<int> Mantissa;
  auto GetConstAndPow2Ops = [&](unsigned ConstOpIdx) {
    if (ConstOpIdx == 1 && N->getOpcode() == ISD::FDIV)
      return false;

    ConstOp = peekThroughBitcasts(N->getOperand(ConstOpIdx));
    Pow2Op = N->getOperand(1 - ConstOpIdx);
    if (Pow2Op.getOpcode() != ISD::UINT_TO_FP &&
        (Pow2Op.getOpcode() != ISD::SINT_TO_FP ||
         !DAG.computeKnownBits(Pow2Op).isNonNegative()))
      return false;

    Pow2Op = Pow2Op.getOperand(0);

    // `Log2(Pow2Op) < Pow2Op.getScalarSizeInBits()`.
    // TODO: We could use knownbits to make this bound more precise.
    int MaxExpChange = Pow2Op.getValueType().getScalarSizeInBits();

    auto IsFPConstValid = [N, MaxExpChange, &Mantissa](ConstantFPSDNode *CFP) {
      if (CFP == nullptr)
        return false;

      const APFloat &APF = CFP->getValueAPF();

      // Make sure we have normal/ieee constant.
      if (!APF.isNormal() || !APF.isIEEE())
        return false;

      // Make sure the floats exponent is within the bounds that this transform
      // produces bitwise equals value.
      int CurExp = ilogb(APF);
      // FMul by pow2 will only increase exponent.
      int MinExp =
          N->getOpcode() == ISD::FMUL ? CurExp : (CurExp - MaxExpChange);
      // FDiv by pow2 will only decrease exponent.
      int MaxExp =
          N->getOpcode() == ISD::FDIV ? CurExp : (CurExp + MaxExpChange);
      if (MinExp <= APFloat::semanticsMinExponent(APF.getSemantics()) ||
          MaxExp >= APFloat::semanticsMaxExponent(APF.getSemantics()))
        return false;

      // Finally make sure we actually know the mantissa for the float type.
      int ThisMantissa = APFloat::semanticsPrecision(APF.getSemantics()) - 1;
      if (!Mantissa)
        Mantissa = ThisMantissa;

      return *Mantissa == ThisMantissa && ThisMantissa > 0;
    };

    // TODO: We may be able to include undefs.
    return ISD::matchUnaryFpPredicate(ConstOp, IsFPConstValid);
  };

  if (!GetConstAndPow2Ops(0) && !GetConstAndPow2Ops(1))
    return SDValue();

  if (!TLI.optimizeFMulOrFDivAsShiftAddBitcast(N, ConstOp, Pow2Op))
    return SDValue();

  // Get log2 after all other checks have taken place. This is because
  // BuildLogBase2 may create a new node.
  SDLoc DL(N);
  // Get Log2 type with same bitwidth as the float type (VT).
  EVT NewIntVT = EVT::getIntegerVT(*DAG.getContext(), VT.getScalarSizeInBits());
  if (VT.isVector())
    NewIntVT = EVT::getVectorVT(*DAG.getContext(), NewIntVT,
                                VT.getVectorElementCount());

  SDValue Log2 = BuildLogBase2(Pow2Op, DL, DAG.isKnownNeverZero(Pow2Op),
                               /*InexpensiveOnly*/ true, NewIntVT);
  if (!Log2)
    return SDValue();

  // Perform actual transform.
  SDValue MantissaShiftCnt =
      DAG.getShiftAmountConstant(*Mantissa, NewIntVT, DL);
  // TODO: Sometimes Log2 is of form `(X + C)`. `(X + C) << C1` should fold to
  // `(X << C1) + (C << C1)`, but that isn't always the case because of the
  // cast. We could implement that by handle here to handle the casts.
  SDValue Shift = DAG.getNode(ISD::SHL, DL, NewIntVT, Log2, MantissaShiftCnt);
  SDValue ResAsInt =
      DAG.getNode(N->getOpcode() == ISD::FMUL ? ISD::ADD : ISD::SUB, DL,
                  NewIntVT, DAG.getBitcast(NewIntVT, ConstOp), Shift);
  SDValue ResAsFP = DAG.getBitcast(VT, ResAsInt);
  return ResAsFP;
}

SDValue DAGCombiner::visitFMUL(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  ConstantFPSDNode *N1CFP = isConstOrConstSplatFP(N1, true);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);
  const TargetOptions &Options = DAG.getTarget().Options;
  const SDNodeFlags Flags = N->getFlags();
  SelectionDAG::FlagInserter FlagsInserter(DAG, N);

  if (SDValue R = DAG.simplifyFPBinop(N->getOpcode(), N0, N1, Flags))
    return R;

  // fold (fmul c1, c2) -> c1*c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FMUL, DL, VT, {N0, N1}))
    return C;

  // canonicalize constant to RHS
  if (DAG.isConstantFPBuildVectorOrConstantFP(N0) &&
     !DAG.isConstantFPBuildVectorOrConstantFP(N1))
    return DAG.getNode(ISD::FMUL, DL, VT, N1, N0);

  // fold vector ops
  if (VT.isVector())
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  if (Options.UnsafeFPMath || Flags.hasAllowReassociation()) {
    // fmul (fmul X, C1), C2 -> fmul X, C1 * C2
    if (DAG.isConstantFPBuildVectorOrConstantFP(N1) &&
        N0.getOpcode() == ISD::FMUL) {
      SDValue N00 = N0.getOperand(0);
      SDValue N01 = N0.getOperand(1);
      // Avoid an infinite loop by making sure that N00 is not a constant
      // (the inner multiply has not been constant folded yet).
      if (DAG.isConstantFPBuildVectorOrConstantFP(N01) &&
          !DAG.isConstantFPBuildVectorOrConstantFP(N00)) {
        SDValue MulConsts = DAG.getNode(ISD::FMUL, DL, VT, N01, N1);
        return DAG.getNode(ISD::FMUL, DL, VT, N00, MulConsts);
      }
    }

    // Match a special-case: we convert X * 2.0 into fadd.
    // fmul (fadd X, X), C -> fmul X, 2.0 * C
    if (N0.getOpcode() == ISD::FADD && N0.hasOneUse() &&
        N0.getOperand(0) == N0.getOperand(1)) {
      const SDValue Two = DAG.getConstantFP(2.0, DL, VT);
      SDValue MulConsts = DAG.getNode(ISD::FMUL, DL, VT, Two, N1);
      return DAG.getNode(ISD::FMUL, DL, VT, N0.getOperand(0), MulConsts);
    }

    // Fold fmul(vecreduce(x), vecreduce(y)) -> vecreduce(fmul(x, y))
    if (SDValue SD = reassociateReduction(ISD::VECREDUCE_FMUL, ISD::FMUL, DL,
                                          VT, N0, N1, Flags))
      return SD;
  }

  // fold (fmul X, 2.0) -> (fadd X, X)
  if (N1CFP && N1CFP->isExactlyValue(+2.0))
    return DAG.getNode(ISD::FADD, DL, VT, N0, N0);

  // fold (fmul X, -1.0) -> (fsub -0.0, X)
  if (N1CFP && N1CFP->isExactlyValue(-1.0)) {
    if (!LegalOperations || TLI.isOperationLegal(ISD::FSUB, VT)) {
      return DAG.getNode(ISD::FSUB, DL, VT,
                         DAG.getConstantFP(-0.0, DL, VT), N0, Flags);
    }
  }

  // -N0 * -N1 --> N0 * N1
  TargetLowering::NegatibleCost CostN0 =
      TargetLowering::NegatibleCost::Expensive;
  TargetLowering::NegatibleCost CostN1 =
      TargetLowering::NegatibleCost::Expensive;
  SDValue NegN0 =
      TLI.getNegatedExpression(N0, DAG, LegalOperations, ForCodeSize, CostN0);
  if (NegN0) {
    HandleSDNode NegN0Handle(NegN0);
    SDValue NegN1 =
        TLI.getNegatedExpression(N1, DAG, LegalOperations, ForCodeSize, CostN1);
    if (NegN1 && (CostN0 == TargetLowering::NegatibleCost::Cheaper ||
                  CostN1 == TargetLowering::NegatibleCost::Cheaper))
      return DAG.getNode(ISD::FMUL, DL, VT, NegN0, NegN1);
  }

  // fold (fmul X, (select (fcmp X > 0.0), -1.0, 1.0)) -> (fneg (fabs X))
  // fold (fmul X, (select (fcmp X > 0.0), 1.0, -1.0)) -> (fabs X)
  if (Flags.hasNoNaNs() && Flags.hasNoSignedZeros() &&
      (N0.getOpcode() == ISD::SELECT || N1.getOpcode() == ISD::SELECT) &&
      TLI.isOperationLegal(ISD::FABS, VT)) {
    SDValue Select = N0, X = N1;
    if (Select.getOpcode() != ISD::SELECT)
      std::swap(Select, X);

    SDValue Cond = Select.getOperand(0);
    auto TrueOpnd  = dyn_cast<ConstantFPSDNode>(Select.getOperand(1));
    auto FalseOpnd = dyn_cast<ConstantFPSDNode>(Select.getOperand(2));

    if (TrueOpnd && FalseOpnd &&
        Cond.getOpcode() == ISD::SETCC && Cond.getOperand(0) == X &&
        isa<ConstantFPSDNode>(Cond.getOperand(1)) &&
        cast<ConstantFPSDNode>(Cond.getOperand(1))->isExactlyValue(0.0)) {
      ISD::CondCode CC = cast<CondCodeSDNode>(Cond.getOperand(2))->get();
      switch (CC) {
      default: break;
      case ISD::SETOLT:
      case ISD::SETULT:
      case ISD::SETOLE:
      case ISD::SETULE:
      case ISD::SETLT:
      case ISD::SETLE:
        std::swap(TrueOpnd, FalseOpnd);
        [[fallthrough]];
      case ISD::SETOGT:
      case ISD::SETUGT:
      case ISD::SETOGE:
      case ISD::SETUGE:
      case ISD::SETGT:
      case ISD::SETGE:
        if (TrueOpnd->isExactlyValue(-1.0) && FalseOpnd->isExactlyValue(1.0) &&
            TLI.isOperationLegal(ISD::FNEG, VT))
          return DAG.getNode(ISD::FNEG, DL, VT,
                   DAG.getNode(ISD::FABS, DL, VT, X));
        if (TrueOpnd->isExactlyValue(1.0) && FalseOpnd->isExactlyValue(-1.0))
          return DAG.getNode(ISD::FABS, DL, VT, X);

        break;
      }
    }
  }

  // FMUL -> FMA combines:
  if (SDValue Fused = visitFMULForFMADistributiveCombine(N)) {
    AddToWorklist(Fused.getNode());
    return Fused;
  }

  // Don't do `combineFMulOrFDivWithIntPow2` until after FMUL -> FMA has been
  // able to run.
  if (SDValue R = combineFMulOrFDivWithIntPow2(N))
    return R;

  return SDValue();
}

template <class MatchContextClass> SDValue DAGCombiner::visitFMA(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue N2 = N->getOperand(2);
  ConstantFPSDNode *N0CFP = dyn_cast<ConstantFPSDNode>(N0);
  ConstantFPSDNode *N1CFP = dyn_cast<ConstantFPSDNode>(N1);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);
  const TargetOptions &Options = DAG.getTarget().Options;
  // FMA nodes have flags that propagate to the created nodes.
  SelectionDAG::FlagInserter FlagsInserter(DAG, N);
  MatchContextClass matcher(DAG, TLI, N);

  // Constant fold FMA.
  if (SDValue C =
          DAG.FoldConstantArithmetic(N->getOpcode(), DL, VT, {N0, N1, N2}))
    return C;

  // (-N0 * -N1) + N2 --> (N0 * N1) + N2
  TargetLowering::NegatibleCost CostN0 =
      TargetLowering::NegatibleCost::Expensive;
  TargetLowering::NegatibleCost CostN1 =
      TargetLowering::NegatibleCost::Expensive;
  SDValue NegN0 =
      TLI.getNegatedExpression(N0, DAG, LegalOperations, ForCodeSize, CostN0);
  if (NegN0) {
    HandleSDNode NegN0Handle(NegN0);
    SDValue NegN1 =
        TLI.getNegatedExpression(N1, DAG, LegalOperations, ForCodeSize, CostN1);
    if (NegN1 && (CostN0 == TargetLowering::NegatibleCost::Cheaper ||
                  CostN1 == TargetLowering::NegatibleCost::Cheaper))
      return matcher.getNode(ISD::FMA, DL, VT, NegN0, NegN1, N2);
  }

  // FIXME: use fast math flags instead of Options.UnsafeFPMath
  if (Options.UnsafeFPMath) {
    if (N0CFP && N0CFP->isZero())
      return N2;
    if (N1CFP && N1CFP->isZero())
      return N2;
  }

  // FIXME: Support splat of constant.
  if (N0CFP && N0CFP->isExactlyValue(1.0))
    return matcher.getNode(ISD::FADD, DL, VT, N1, N2);
  if (N1CFP && N1CFP->isExactlyValue(1.0))
    return matcher.getNode(ISD::FADD, DL, VT, N0, N2);

  // Canonicalize (fma c, x, y) -> (fma x, c, y)
  if (DAG.isConstantFPBuildVectorOrConstantFP(N0) &&
     !DAG.isConstantFPBuildVectorOrConstantFP(N1))
    return matcher.getNode(ISD::FMA, DL, VT, N1, N0, N2);

  bool CanReassociate =
      Options.UnsafeFPMath || N->getFlags().hasAllowReassociation();
  if (CanReassociate) {
    // (fma x, c1, (fmul x, c2)) -> (fmul x, c1+c2)
    if (matcher.match(N2, ISD::FMUL) && N0 == N2.getOperand(0) &&
        DAG.isConstantFPBuildVectorOrConstantFP(N1) &&
        DAG.isConstantFPBuildVectorOrConstantFP(N2.getOperand(1))) {
      return matcher.getNode(
          ISD::FMUL, DL, VT, N0,
          matcher.getNode(ISD::FADD, DL, VT, N1, N2.getOperand(1)));
    }

    // (fma (fmul x, c1), c2, y) -> (fma x, c1*c2, y)
    if (matcher.match(N0, ISD::FMUL) &&
        DAG.isConstantFPBuildVectorOrConstantFP(N1) &&
        DAG.isConstantFPBuildVectorOrConstantFP(N0.getOperand(1))) {
      return matcher.getNode(
          ISD::FMA, DL, VT, N0.getOperand(0),
          matcher.getNode(ISD::FMUL, DL, VT, N1, N0.getOperand(1)), N2);
    }
  }

  // (fma x, -1, y) -> (fadd (fneg x), y)
  // FIXME: Support splat of constant.
  if (N1CFP) {
    if (N1CFP->isExactlyValue(1.0))
      return matcher.getNode(ISD::FADD, DL, VT, N0, N2);

    if (N1CFP->isExactlyValue(-1.0) &&
        (!LegalOperations || TLI.isOperationLegal(ISD::FNEG, VT))) {
      SDValue RHSNeg = matcher.getNode(ISD::FNEG, DL, VT, N0);
      AddToWorklist(RHSNeg.getNode());
      return matcher.getNode(ISD::FADD, DL, VT, N2, RHSNeg);
    }

    // fma (fneg x), K, y -> fma x -K, y
    if (matcher.match(N0, ISD::FNEG) &&
        (TLI.isOperationLegal(ISD::ConstantFP, VT) ||
         (N1.hasOneUse() &&
          !TLI.isFPImmLegal(N1CFP->getValueAPF(), VT, ForCodeSize)))) {
      return matcher.getNode(ISD::FMA, DL, VT, N0.getOperand(0),
                             matcher.getNode(ISD::FNEG, DL, VT, N1), N2);
    }
  }

  // FIXME: Support splat of constant.
  if (CanReassociate) {
    // (fma x, c, x) -> (fmul x, (c+1))
    if (N1CFP && N0 == N2) {
      return matcher.getNode(ISD::FMUL, DL, VT, N0,
                             matcher.getNode(ISD::FADD, DL, VT, N1,
                                             DAG.getConstantFP(1.0, DL, VT)));
    }

    // (fma x, c, (fneg x)) -> (fmul x, (c-1))
    if (N1CFP && matcher.match(N2, ISD::FNEG) && N2.getOperand(0) == N0) {
      return matcher.getNode(ISD::FMUL, DL, VT, N0,
                             matcher.getNode(ISD::FADD, DL, VT, N1,
                                             DAG.getConstantFP(-1.0, DL, VT)));
    }
  }

  // fold ((fma (fneg X), Y, (fneg Z)) -> fneg (fma X, Y, Z))
  // fold ((fma X, (fneg Y), (fneg Z)) -> fneg (fma X, Y, Z))
  if (!TLI.isFNegFree(VT))
    if (SDValue Neg = TLI.getCheaperNegatedExpression(
            SDValue(N, 0), DAG, LegalOperations, ForCodeSize))
      return matcher.getNode(ISD::FNEG, DL, VT, Neg);
  return SDValue();
}

SDValue DAGCombiner::visitFMAD(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue N2 = N->getOperand(2);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // Constant fold FMAD.
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FMAD, DL, VT, {N0, N1, N2}))
    return C;

  return SDValue();
}

// Combine multiple FDIVs with the same divisor into multiple FMULs by the
// reciprocal.
// E.g., (a / D; b / D;) -> (recip = 1.0 / D; a * recip; b * recip)
// Notice that this is not always beneficial. One reason is different targets
// may have different costs for FDIV and FMUL, so sometimes the cost of two
// FDIVs may be lower than the cost of one FDIV and two FMULs. Another reason
// is the critical path is increased from "one FDIV" to "one FDIV + one FMUL".
SDValue DAGCombiner::combineRepeatedFPDivisors(SDNode *N) {
  // TODO: Limit this transform based on optsize/minsize - it always creates at
  //       least 1 extra instruction. But the perf win may be substantial enough
  //       that only minsize should restrict this.
  bool UnsafeMath = DAG.getTarget().Options.UnsafeFPMath;
  const SDNodeFlags Flags = N->getFlags();
  if (LegalDAG || (!UnsafeMath && !Flags.hasAllowReciprocal()))
    return SDValue();

  // Skip if current node is a reciprocal/fneg-reciprocal.
  SDValue N0 = N->getOperand(0), N1 = N->getOperand(1);
  ConstantFPSDNode *N0CFP = isConstOrConstSplatFP(N0, /* AllowUndefs */ true);
  if (N0CFP && (N0CFP->isExactlyValue(1.0) || N0CFP->isExactlyValue(-1.0)))
    return SDValue();

  // Exit early if the target does not want this transform or if there can't
  // possibly be enough uses of the divisor to make the transform worthwhile.
  unsigned MinUses = TLI.combineRepeatedFPDivisors();

  // For splat vectors, scale the number of uses by the splat factor. If we can
  // convert the division into a scalar op, that will likely be much faster.
  unsigned NumElts = 1;
  EVT VT = N->getValueType(0);
  if (VT.isVector() && DAG.isSplatValue(N1))
    NumElts = VT.getVectorMinNumElements();

  if (!MinUses || (N1->use_size() * NumElts) < MinUses)
    return SDValue();

  // Find all FDIV users of the same divisor.
  // Use a set because duplicates may be present in the user list.
  SetVector<SDNode *> Users;
  for (auto *U : N1->uses()) {
    if (U->getOpcode() == ISD::FDIV && U->getOperand(1) == N1) {
      // Skip X/sqrt(X) that has not been simplified to sqrt(X) yet.
      if (U->getOperand(1).getOpcode() == ISD::FSQRT &&
          U->getOperand(0) == U->getOperand(1).getOperand(0) &&
          U->getFlags().hasAllowReassociation() &&
          U->getFlags().hasNoSignedZeros())
        continue;

      // This division is eligible for optimization only if global unsafe math
      // is enabled or if this division allows reciprocal formation.
      if (UnsafeMath || U->getFlags().hasAllowReciprocal())
        Users.insert(U);
    }
  }

  // Now that we have the actual number of divisor uses, make sure it meets
  // the minimum threshold specified by the target.
  if ((Users.size() * NumElts) < MinUses)
    return SDValue();

  SDLoc DL(N);
  SDValue FPOne = DAG.getConstantFP(1.0, DL, VT);
  SDValue Reciprocal = DAG.getNode(ISD::FDIV, DL, VT, FPOne, N1, Flags);

  // Dividend / Divisor -> Dividend * Reciprocal
  for (auto *U : Users) {
    SDValue Dividend = U->getOperand(0);
    if (Dividend != FPOne) {
      SDValue NewNode = DAG.getNode(ISD::FMUL, SDLoc(U), VT, Dividend,
                                    Reciprocal, Flags);
      CombineTo(U, NewNode);
    } else if (U != Reciprocal.getNode()) {
      // In the absence of fast-math-flags, this user node is always the
      // same node as Reciprocal, but with FMF they may be different nodes.
      CombineTo(U, Reciprocal);
    }
  }
  return SDValue(N, 0);  // N was replaced.
}

SDValue DAGCombiner::visitFDIV(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);
  const TargetOptions &Options = DAG.getTarget().Options;
  SDNodeFlags Flags = N->getFlags();
  SelectionDAG::FlagInserter FlagsInserter(DAG, N);

  if (SDValue R = DAG.simplifyFPBinop(N->getOpcode(), N0, N1, Flags))
    return R;

  // fold (fdiv c1, c2) -> c1/c2
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FDIV, DL, VT, {N0, N1}))
    return C;

  // fold vector ops
  if (VT.isVector())
    if (SDValue FoldedVOp = SimplifyVBinOp(N, DL))
      return FoldedVOp;

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  if (SDValue V = combineRepeatedFPDivisors(N))
    return V;

  // fold (fdiv X, c2) -> (fmul X, 1/c2) if there is no loss in precision, or
  // the loss is acceptable with AllowReciprocal.
  if (auto *N1CFP = isConstOrConstSplatFP(N1, true)) {
    // Compute the reciprocal 1.0 / c2.
    const APFloat &N1APF = N1CFP->getValueAPF();
    APFloat Recip = APFloat::getOne(N1APF.getSemantics());
    APFloat::opStatus st = Recip.divide(N1APF, APFloat::rmNearestTiesToEven);
    // Only do the transform if the reciprocal is a legal fp immediate that
    // isn't too nasty (eg NaN, denormal, ...).
    if (((st == APFloat::opOK && !Recip.isDenormal()) ||
         (st == APFloat::opInexact &&
          (Options.UnsafeFPMath || Flags.hasAllowReciprocal()))) &&
        (!LegalOperations ||
         // FIXME: custom lowering of ConstantFP might fail (see e.g. ARM
         // backend)... we should handle this gracefully after Legalize.
         // TLI.isOperationLegalOrCustom(ISD::ConstantFP, VT) ||
         TLI.isOperationLegal(ISD::ConstantFP, VT) ||
         TLI.isFPImmLegal(Recip, VT, ForCodeSize)))
      return DAG.getNode(ISD::FMUL, DL, VT, N0,
                         DAG.getConstantFP(Recip, DL, VT));
  }

  if (Options.UnsafeFPMath || Flags.hasAllowReciprocal()) {
    // If this FDIV is part of a reciprocal square root, it may be folded
    // into a target-specific square root estimate instruction.
    if (N1.getOpcode() == ISD::FSQRT) {
      if (SDValue RV = buildRsqrtEstimate(N1.getOperand(0), Flags))
        return DAG.getNode(ISD::FMUL, DL, VT, N0, RV);
    } else if (N1.getOpcode() == ISD::FP_EXTEND &&
               N1.getOperand(0).getOpcode() == ISD::FSQRT) {
      if (SDValue RV =
              buildRsqrtEstimate(N1.getOperand(0).getOperand(0), Flags)) {
        RV = DAG.getNode(ISD::FP_EXTEND, SDLoc(N1), VT, RV);
        AddToWorklist(RV.getNode());
        return DAG.getNode(ISD::FMUL, DL, VT, N0, RV);
      }
    } else if (N1.getOpcode() == ISD::FP_ROUND &&
               N1.getOperand(0).getOpcode() == ISD::FSQRT) {
      if (SDValue RV =
              buildRsqrtEstimate(N1.getOperand(0).getOperand(0), Flags)) {
        RV = DAG.getNode(ISD::FP_ROUND, SDLoc(N1), VT, RV, N1.getOperand(1));
        AddToWorklist(RV.getNode());
        return DAG.getNode(ISD::FMUL, DL, VT, N0, RV);
      }
    } else if (N1.getOpcode() == ISD::FMUL) {
      // Look through an FMUL. Even though this won't remove the FDIV directly,
      // it's still worthwhile to get rid of the FSQRT if possible.
      SDValue Sqrt, Y;
      if (N1.getOperand(0).getOpcode() == ISD::FSQRT) {
        Sqrt = N1.getOperand(0);
        Y = N1.getOperand(1);
      } else if (N1.getOperand(1).getOpcode() == ISD::FSQRT) {
        Sqrt = N1.getOperand(1);
        Y = N1.getOperand(0);
      }
      if (Sqrt.getNode()) {
        // If the other multiply operand is known positive, pull it into the
        // sqrt. That will eliminate the division if we convert to an estimate.
        if (Flags.hasAllowReassociation() && N1.hasOneUse() &&
            N1->getFlags().hasAllowReassociation() && Sqrt.hasOneUse()) {
          SDValue A;
          if (Y.getOpcode() == ISD::FABS && Y.hasOneUse())
            A = Y.getOperand(0);
          else if (Y == Sqrt.getOperand(0))
            A = Y;
          if (A) {
            // X / (fabs(A) * sqrt(Z)) --> X / sqrt(A*A*Z) --> X * rsqrt(A*A*Z)
            // X / (A * sqrt(A))       --> X / sqrt(A*A*A) --> X * rsqrt(A*A*A)
            SDValue AA = DAG.getNode(ISD::FMUL, DL, VT, A, A);
            SDValue AAZ =
                DAG.getNode(ISD::FMUL, DL, VT, AA, Sqrt.getOperand(0));
            if (SDValue Rsqrt = buildRsqrtEstimate(AAZ, Flags))
              return DAG.getNode(ISD::FMUL, DL, VT, N0, Rsqrt);

            // Estimate creation failed. Clean up speculatively created nodes.
            recursivelyDeleteUnusedNodes(AAZ.getNode());
          }
        }

        // We found a FSQRT, so try to make this fold:
        // X / (Y * sqrt(Z)) -> X * (rsqrt(Z) / Y)
        if (SDValue Rsqrt = buildRsqrtEstimate(Sqrt.getOperand(0), Flags)) {
          SDValue Div = DAG.getNode(ISD::FDIV, SDLoc(N1), VT, Rsqrt, Y);
          AddToWorklist(Div.getNode());
          return DAG.getNode(ISD::FMUL, DL, VT, N0, Div);
        }
      }
    }

    // Fold into a reciprocal estimate and multiply instead of a real divide.
    if (Options.NoInfsFPMath || Flags.hasNoInfs())
      if (SDValue RV = BuildDivEstimate(N0, N1, Flags))
        return RV;
  }

  // Fold X/Sqrt(X) -> Sqrt(X)
  if ((Options.NoSignedZerosFPMath || Flags.hasNoSignedZeros()) &&
      (Options.UnsafeFPMath || Flags.hasAllowReassociation()))
    if (N1.getOpcode() == ISD::FSQRT && N0 == N1.getOperand(0))
      return N1;

  // (fdiv (fneg X), (fneg Y)) -> (fdiv X, Y)
  TargetLowering::NegatibleCost CostN0 =
      TargetLowering::NegatibleCost::Expensive;
  TargetLowering::NegatibleCost CostN1 =
      TargetLowering::NegatibleCost::Expensive;
  SDValue NegN0 =
      TLI.getNegatedExpression(N0, DAG, LegalOperations, ForCodeSize, CostN0);
  if (NegN0) {
    HandleSDNode NegN0Handle(NegN0);
    SDValue NegN1 =
        TLI.getNegatedExpression(N1, DAG, LegalOperations, ForCodeSize, CostN1);
    if (NegN1 && (CostN0 == TargetLowering::NegatibleCost::Cheaper ||
                  CostN1 == TargetLowering::NegatibleCost::Cheaper))
      return DAG.getNode(ISD::FDIV, DL, VT, NegN0, NegN1);
  }

  if (SDValue R = combineFMulOrFDivWithIntPow2(N))
    return R;

  return SDValue();
}

SDValue DAGCombiner::visitFREM(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDNodeFlags Flags = N->getFlags();
  SelectionDAG::FlagInserter FlagsInserter(DAG, N);
  SDLoc DL(N);

  if (SDValue R = DAG.simplifyFPBinop(N->getOpcode(), N0, N1, Flags))
    return R;

  // fold (frem c1, c2) -> fmod(c1,c2)
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FREM, DL, VT, {N0, N1}))
    return C;

  if (SDValue NewSel = foldBinOpIntoSelect(N))
    return NewSel;

  // Lower frem N0, N1 => x - trunc(N0 / N1) * N1, providing N1 is an integer
  // power of 2.
  if (!TLI.isOperationLegal(ISD::FREM, VT) &&
      TLI.isOperationLegalOrCustom(ISD::FMUL, VT) &&
      TLI.isOperationLegalOrCustom(ISD::FDIV, VT) &&
      TLI.isOperationLegalOrCustom(ISD::FTRUNC, VT) &&
      DAG.isKnownToBeAPowerOfTwoFP(N1)) {
    bool NeedsCopySign =
        !Flags.hasNoSignedZeros() && !DAG.cannotBeOrderedNegativeFP(N0);
    SDValue Div = DAG.getNode(ISD::FDIV, DL, VT, N0, N1);
    SDValue Rnd = DAG.getNode(ISD::FTRUNC, DL, VT, Div);
    SDValue MLA;
    if (TLI.isFMAFasterThanFMulAndFAdd(DAG.getMachineFunction(), VT)) {
      MLA = DAG.getNode(ISD::FMA, DL, VT, DAG.getNode(ISD::FNEG, DL, VT, Rnd),
                        N1, N0);
    } else {
      SDValue Mul = DAG.getNode(ISD::FMUL, DL, VT, Rnd, N1);
      MLA = DAG.getNode(ISD::FSUB, DL, VT, N0, Mul);
    }
    return NeedsCopySign ? DAG.getNode(ISD::FCOPYSIGN, DL, VT, MLA, N0) : MLA;
  }

  return SDValue();
}

SDValue DAGCombiner::visitFSQRT(SDNode *N) {
  SDNodeFlags Flags = N->getFlags();
  const TargetOptions &Options = DAG.getTarget().Options;

  // Require 'ninf' flag since sqrt(+Inf) = +Inf, but the estimation goes as:
  // sqrt(+Inf) == rsqrt(+Inf) * +Inf = 0 * +Inf = NaN
  if (!Flags.hasApproximateFuncs() ||
      (!Options.NoInfsFPMath && !Flags.hasNoInfs()))
    return SDValue();

  SDValue N0 = N->getOperand(0);
  if (TLI.isFsqrtCheap(N0, DAG))
    return SDValue();

  // FSQRT nodes have flags that propagate to the created nodes.
  // TODO: If this is N0/sqrt(N0), and we reach this node before trying to
  //       transform the fdiv, we may produce a sub-optimal estimate sequence
  //       because the reciprocal calculation may not have to filter out a
  //       0.0 input.
  return buildSqrtEstimate(N0, Flags);
}

/// copysign(x, fp_extend(y)) -> copysign(x, y)
/// copysign(x, fp_round(y)) -> copysign(x, y)
/// Operands to the functions are the type of X and Y respectively.
static inline bool CanCombineFCOPYSIGN_EXTEND_ROUND(EVT XTy, EVT YTy) {
  // Always fold no-op FP casts.
  if (XTy == YTy)
    return true;

  // Do not optimize out type conversion of f128 type yet.
  // For some targets like x86_64, configuration is changed to keep one f128
  // value in one SSE register, but instruction selection cannot handle
  // FCOPYSIGN on SSE registers yet.
  if (YTy == MVT::f128)
    return false;

  return !YTy.isVector() || EnableVectorFCopySignExtendRound;
}

static inline bool CanCombineFCOPYSIGN_EXTEND_ROUND(SDNode *N) {
  SDValue N1 = N->getOperand(1);
  if (N1.getOpcode() != ISD::FP_EXTEND &&
      N1.getOpcode() != ISD::FP_ROUND)
    return false;
  EVT N1VT = N1->getValueType(0);
  EVT N1Op0VT = N1->getOperand(0).getValueType();
  return CanCombineFCOPYSIGN_EXTEND_ROUND(N1VT, N1Op0VT);
}

SDValue DAGCombiner::visitFCOPYSIGN(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // fold (fcopysign c1, c2) -> fcopysign(c1,c2)
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FCOPYSIGN, DL, VT, {N0, N1}))
    return C;

  if (ConstantFPSDNode *N1C = isConstOrConstSplatFP(N->getOperand(1))) {
    const APFloat &V = N1C->getValueAPF();
    // copysign(x, c1) -> fabs(x)       iff ispos(c1)
    // copysign(x, c1) -> fneg(fabs(x)) iff isneg(c1)
    if (!V.isNegative()) {
      if (!LegalOperations || TLI.isOperationLegal(ISD::FABS, VT))
        return DAG.getNode(ISD::FABS, DL, VT, N0);
    } else {
      if (!LegalOperations || TLI.isOperationLegal(ISD::FNEG, VT))
        return DAG.getNode(ISD::FNEG, DL, VT,
                           DAG.getNode(ISD::FABS, SDLoc(N0), VT, N0));
    }
  }

  // copysign(fabs(x), y) -> copysign(x, y)
  // copysign(fneg(x), y) -> copysign(x, y)
  // copysign(copysign(x,z), y) -> copysign(x, y)
  if (N0.getOpcode() == ISD::FABS || N0.getOpcode() == ISD::FNEG ||
      N0.getOpcode() == ISD::FCOPYSIGN)
    return DAG.getNode(ISD::FCOPYSIGN, DL, VT, N0.getOperand(0), N1);

  // copysign(x, abs(y)) -> abs(x)
  if (N1.getOpcode() == ISD::FABS)
    return DAG.getNode(ISD::FABS, DL, VT, N0);

  // copysign(x, copysign(y,z)) -> copysign(x, z)
  if (N1.getOpcode() == ISD::FCOPYSIGN)
    return DAG.getNode(ISD::FCOPYSIGN, DL, VT, N0, N1.getOperand(1));

  // copysign(x, fp_extend(y)) -> copysign(x, y)
  // copysign(x, fp_round(y)) -> copysign(x, y)
  if (CanCombineFCOPYSIGN_EXTEND_ROUND(N))
    return DAG.getNode(ISD::FCOPYSIGN, DL, VT, N0, N1.getOperand(0));

  // We only take the sign bit from the sign operand.
  EVT SignVT = N1.getValueType();
  if (SimplifyDemandedBits(N1,
                           APInt::getSignMask(SignVT.getScalarSizeInBits())))
    return SDValue(N, 0);

  // We only take the non-sign bits from the value operand
  if (SimplifyDemandedBits(N0,
                           APInt::getSignedMaxValue(VT.getScalarSizeInBits())))
    return SDValue(N, 0);

  return SDValue();
}

SDValue DAGCombiner::visitFPOW(SDNode *N) {
  ConstantFPSDNode *ExponentC = isConstOrConstSplatFP(N->getOperand(1));
  if (!ExponentC)
    return SDValue();
  SelectionDAG::FlagInserter FlagsInserter(DAG, N);

  // Try to convert x ** (1/3) into cube root.
  // TODO: Handle the various flavors of long double.
  // TODO: Since we're approximating, we don't need an exact 1/3 exponent.
  //       Some range near 1/3 should be fine.
  EVT VT = N->getValueType(0);
  if ((VT == MVT::f32 && ExponentC->getValueAPF().isExactlyValue(1.0f/3.0f)) ||
      (VT == MVT::f64 && ExponentC->getValueAPF().isExactlyValue(1.0/3.0))) {
    // pow(-0.0, 1/3) = +0.0; cbrt(-0.0) = -0.0.
    // pow(-inf, 1/3) = +inf; cbrt(-inf) = -inf.
    // pow(-val, 1/3) =  nan; cbrt(-val) = -num.
    // For regular numbers, rounding may cause the results to differ.
    // Therefore, we require { nsz ninf nnan afn } for this transform.
    // TODO: We could select out the special cases if we don't have nsz/ninf.
    SDNodeFlags Flags = N->getFlags();
    if (!Flags.hasNoSignedZeros() || !Flags.hasNoInfs() || !Flags.hasNoNaNs() ||
        !Flags.hasApproximateFuncs())
      return SDValue();

    // Do not create a cbrt() libcall if the target does not have it, and do not
    // turn a pow that has lowering support into a cbrt() libcall.
    if (!DAG.getLibInfo().has(LibFunc_cbrt) ||
        (!DAG.getTargetLoweringInfo().isOperationExpand(ISD::FPOW, VT) &&
         DAG.getTargetLoweringInfo().isOperationExpand(ISD::FCBRT, VT)))
      return SDValue();

    return DAG.getNode(ISD::FCBRT, SDLoc(N), VT, N->getOperand(0));
  }

  // Try to convert x ** (1/4) and x ** (3/4) into square roots.
  // x ** (1/2) is canonicalized to sqrt, so we do not bother with that case.
  // TODO: This could be extended (using a target hook) to handle smaller
  // power-of-2 fractional exponents.
  bool ExponentIs025 = ExponentC->getValueAPF().isExactlyValue(0.25);
  bool ExponentIs075 = ExponentC->getValueAPF().isExactlyValue(0.75);
  if (ExponentIs025 || ExponentIs075) {
    // pow(-0.0, 0.25) = +0.0; sqrt(sqrt(-0.0)) = -0.0.
    // pow(-inf, 0.25) = +inf; sqrt(sqrt(-inf)) =  NaN.
    // pow(-0.0, 0.75) = +0.0; sqrt(-0.0) * sqrt(sqrt(-0.0)) = +0.0.
    // pow(-inf, 0.75) = +inf; sqrt(-inf) * sqrt(sqrt(-inf)) =  NaN.
    // For regular numbers, rounding may cause the results to differ.
    // Therefore, we require { nsz ninf afn } for this transform.
    // TODO: We could select out the special cases if we don't have nsz/ninf.
    SDNodeFlags Flags = N->getFlags();

    // We only need no signed zeros for the 0.25 case.
    if ((!Flags.hasNoSignedZeros() && ExponentIs025) || !Flags.hasNoInfs() ||
        !Flags.hasApproximateFuncs())
      return SDValue();

    // Don't double the number of libcalls. We are trying to inline fast code.
    if (!DAG.getTargetLoweringInfo().isOperationLegalOrCustom(ISD::FSQRT, VT))
      return SDValue();

    // Assume that libcalls are the smallest code.
    // TODO: This restriction should probably be lifted for vectors.
    if (ForCodeSize)
      return SDValue();

    // pow(X, 0.25) --> sqrt(sqrt(X))
    SDLoc DL(N);
    SDValue Sqrt = DAG.getNode(ISD::FSQRT, DL, VT, N->getOperand(0));
    SDValue SqrtSqrt = DAG.getNode(ISD::FSQRT, DL, VT, Sqrt);
    if (ExponentIs025)
      return SqrtSqrt;
    // pow(X, 0.75) --> sqrt(X) * sqrt(sqrt(X))
    return DAG.getNode(ISD::FMUL, DL, VT, Sqrt, SqrtSqrt);
  }

  return SDValue();
}

static SDValue foldFPToIntToFP(SDNode *N, const SDLoc &DL, SelectionDAG &DAG,
                               const TargetLowering &TLI) {
  // We only do this if the target has legal ftrunc. Otherwise, we'd likely be
  // replacing casts with a libcall. We also must be allowed to ignore -0.0
  // because FTRUNC will return -0.0 for (-1.0, -0.0), but using integer
  // conversions would return +0.0.
  // FIXME: We should be able to use node-level FMF here.
  // TODO: If strict math, should we use FABS (+ range check for signed cast)?
  EVT VT = N->getValueType(0);
  if (!TLI.isOperationLegal(ISD::FTRUNC, VT) ||
      !DAG.getTarget().Options.NoSignedZerosFPMath)
    return SDValue();

  // fptosi/fptoui round towards zero, so converting from FP to integer and
  // back is the same as an 'ftrunc': [us]itofp (fpto[us]i X) --> ftrunc X
  SDValue N0 = N->getOperand(0);
  if (N->getOpcode() == ISD::SINT_TO_FP && N0.getOpcode() == ISD::FP_TO_SINT &&
      N0.getOperand(0).getValueType() == VT)
    return DAG.getNode(ISD::FTRUNC, DL, VT, N0.getOperand(0));

  if (N->getOpcode() == ISD::UINT_TO_FP && N0.getOpcode() == ISD::FP_TO_UINT &&
      N0.getOperand(0).getValueType() == VT)
    return DAG.getNode(ISD::FTRUNC, DL, VT, N0.getOperand(0));

  return SDValue();
}

SDValue DAGCombiner::visitSINT_TO_FP(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  EVT OpVT = N0.getValueType();
  SDLoc DL(N);

  // [us]itofp(undef) = 0, because the result value is bounded.
  if (N0.isUndef())
    return DAG.getConstantFP(0.0, DL, VT);

  // fold (sint_to_fp c1) -> c1fp
  // ...but only if the target supports immediate floating-point values
  if ((!LegalOperations || TLI.isOperationLegalOrCustom(ISD::ConstantFP, VT)))
    if (SDValue C = DAG.FoldConstantArithmetic(ISD::SINT_TO_FP, DL, VT, {N0}))
      return C;

  // If the input is a legal type, and SINT_TO_FP is not legal on this target,
  // but UINT_TO_FP is legal on this target, try to convert.
  if (!hasOperation(ISD::SINT_TO_FP, OpVT) &&
      hasOperation(ISD::UINT_TO_FP, OpVT)) {
    // If the sign bit is known to be zero, we can change this to UINT_TO_FP.
    if (DAG.SignBitIsZero(N0))
      return DAG.getNode(ISD::UINT_TO_FP, DL, VT, N0);
  }

  // The next optimizations are desirable only if SELECT_CC can be lowered.
  // fold (sint_to_fp (setcc x, y, cc)) -> (select (setcc x, y, cc), -1.0, 0.0)
  if (N0.getOpcode() == ISD::SETCC && N0.getValueType() == MVT::i1 &&
      !VT.isVector() &&
      (!LegalOperations || TLI.isOperationLegalOrCustom(ISD::ConstantFP, VT)))
    return DAG.getSelect(DL, VT, N0, DAG.getConstantFP(-1.0, DL, VT),
                         DAG.getConstantFP(0.0, DL, VT));

  // fold (sint_to_fp (zext (setcc x, y, cc))) ->
  //      (select (setcc x, y, cc), 1.0, 0.0)
  if (N0.getOpcode() == ISD::ZERO_EXTEND &&
      N0.getOperand(0).getOpcode() == ISD::SETCC && !VT.isVector() &&
      (!LegalOperations || TLI.isOperationLegalOrCustom(ISD::ConstantFP, VT)))
    return DAG.getSelect(DL, VT, N0.getOperand(0),
                         DAG.getConstantFP(1.0, DL, VT),
                         DAG.getConstantFP(0.0, DL, VT));

  if (SDValue FTrunc = foldFPToIntToFP(N, DL, DAG, TLI))
    return FTrunc;

  return SDValue();
}

SDValue DAGCombiner::visitUINT_TO_FP(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  EVT OpVT = N0.getValueType();
  SDLoc DL(N);

  // [us]itofp(undef) = 0, because the result value is bounded.
  if (N0.isUndef())
    return DAG.getConstantFP(0.0, DL, VT);

  // fold (uint_to_fp c1) -> c1fp
  // ...but only if the target supports immediate floating-point values
  if ((!LegalOperations || TLI.isOperationLegalOrCustom(ISD::ConstantFP, VT)))
    if (SDValue C = DAG.FoldConstantArithmetic(ISD::UINT_TO_FP, DL, VT, {N0}))
      return C;

  // If the input is a legal type, and UINT_TO_FP is not legal on this target,
  // but SINT_TO_FP is legal on this target, try to convert.
  if (!hasOperation(ISD::UINT_TO_FP, OpVT) &&
      hasOperation(ISD::SINT_TO_FP, OpVT)) {
    // If the sign bit is known to be zero, we can change this to SINT_TO_FP.
    if (DAG.SignBitIsZero(N0))
      return DAG.getNode(ISD::SINT_TO_FP, DL, VT, N0);
  }

  // fold (uint_to_fp (setcc x, y, cc)) -> (select (setcc x, y, cc), 1.0, 0.0)
  if (N0.getOpcode() == ISD::SETCC && !VT.isVector() &&
      (!LegalOperations || TLI.isOperationLegalOrCustom(ISD::ConstantFP, VT)))
    return DAG.getSelect(DL, VT, N0, DAG.getConstantFP(1.0, DL, VT),
                         DAG.getConstantFP(0.0, DL, VT));

  if (SDValue FTrunc = foldFPToIntToFP(N, DL, DAG, TLI))
    return FTrunc;

  return SDValue();
}

// Fold (fp_to_{s/u}int ({s/u}int_to_fpx)) -> zext x, sext x, trunc x, or x
static SDValue FoldIntToFPToInt(SDNode *N, const SDLoc &DL, SelectionDAG &DAG) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);

  if (N0.getOpcode() != ISD::UINT_TO_FP && N0.getOpcode() != ISD::SINT_TO_FP)
    return SDValue();

  SDValue Src = N0.getOperand(0);
  EVT SrcVT = Src.getValueType();
  bool IsInputSigned = N0.getOpcode() == ISD::SINT_TO_FP;
  bool IsOutputSigned = N->getOpcode() == ISD::FP_TO_SINT;

  // We can safely assume the conversion won't overflow the output range,
  // because (for example) (uint8_t)18293.f is undefined behavior.

  // Since we can assume the conversion won't overflow, our decision as to
  // whether the input will fit in the float should depend on the minimum
  // of the input range and output range.

  // This means this is also safe for a signed input and unsigned output, since
  // a negative input would lead to undefined behavior.
  unsigned InputSize = (int)SrcVT.getScalarSizeInBits() - IsInputSigned;
  unsigned OutputSize = (int)VT.getScalarSizeInBits();
  unsigned ActualSize = std::min(InputSize, OutputSize);
  const fltSemantics &Sem = N0.getValueType().getFltSemantics();

  // We can only fold away the float conversion if the input range can be
  // represented exactly in the float range.
  if (APFloat::semanticsPrecision(Sem) >= ActualSize) {
    if (VT.getScalarSizeInBits() > SrcVT.getScalarSizeInBits()) {
      unsigned ExtOp =
          IsInputSigned && IsOutputSigned ? ISD::SIGN_EXTEND : ISD::ZERO_EXTEND;
      return DAG.getNode(ExtOp, DL, VT, Src);
    }
    if (VT.getScalarSizeInBits() < SrcVT.getScalarSizeInBits())
      return DAG.getNode(ISD::TRUNCATE, DL, VT, Src);
    return DAG.getBitcast(VT, Src);
  }
  return SDValue();
}

SDValue DAGCombiner::visitFP_TO_SINT(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // fold (fp_to_sint undef) -> undef
  if (N0.isUndef())
    return DAG.getUNDEF(VT);

  // fold (fp_to_sint c1fp) -> c1
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FP_TO_SINT, DL, VT, {N0}))
    return C;

  return FoldIntToFPToInt(N, DL, DAG);
}

SDValue DAGCombiner::visitFP_TO_UINT(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // fold (fp_to_uint undef) -> undef
  if (N0.isUndef())
    return DAG.getUNDEF(VT);

  // fold (fp_to_uint c1fp) -> c1
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FP_TO_UINT, DL, VT, {N0}))
    return C;

  return FoldIntToFPToInt(N, DL, DAG);
}

SDValue DAGCombiner::visitXROUND(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);

  // fold (lrint|llrint undef) -> undef
  // fold (lround|llround undef) -> undef
  if (N0.isUndef())
    return DAG.getUNDEF(VT);

  // fold (lrint|llrint c1fp) -> c1
  // fold (lround|llround c1fp) -> c1
  if (SDValue C =
          DAG.FoldConstantArithmetic(N->getOpcode(), SDLoc(N), VT, {N0}))
    return C;

  return SDValue();
}

SDValue DAGCombiner::visitFP_ROUND(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // fold (fp_round c1fp) -> c1fp
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FP_ROUND, DL, VT, {N0, N1}))
    return C;

  // fold (fp_round (fp_extend x)) -> x
  if (N0.getOpcode() == ISD::FP_EXTEND && VT == N0.getOperand(0).getValueType())
    return N0.getOperand(0);

  // fold (fp_round (fp_round x)) -> (fp_round x)
  if (N0.getOpcode() == ISD::FP_ROUND) {
    const bool NIsTrunc = N->getConstantOperandVal(1) == 1;
    const bool N0IsTrunc = N0.getConstantOperandVal(1) == 1;

    // Avoid folding legal fp_rounds into non-legal ones.
    if (!hasOperation(ISD::FP_ROUND, VT))
      return SDValue();

    // Skip this folding if it results in an fp_round from f80 to f16.
    //
    // f80 to f16 always generates an expensive (and as yet, unimplemented)
    // libcall to __truncxfhf2 instead of selecting native f16 conversion
    // instructions from f32 or f64.  Moreover, the first (value-preserving)
    // fp_round from f80 to either f32 or f64 may become a NOP in platforms like
    // x86.
    if (N0.getOperand(0).getValueType() == MVT::f80 && VT == MVT::f16)
      return SDValue();

    // If the first fp_round isn't a value preserving truncation, it might
    // introduce a tie in the second fp_round, that wouldn't occur in the
    // single-step fp_round we want to fold to.
    // In other words, double rounding isn't the same as rounding.
    // Also, this is a value preserving truncation iff both fp_round's are.
    if (DAG.getTarget().Options.UnsafeFPMath || N0IsTrunc)
      return DAG.getNode(
          ISD::FP_ROUND, DL, VT, N0.getOperand(0),
          DAG.getIntPtrConstant(NIsTrunc && N0IsTrunc, DL, /*isTarget=*/true));
  }

  // fold (fp_round (copysign X, Y)) -> (copysign (fp_round X), Y)
  // Note: From a legality perspective, this is a two step transform.  First,
  // we duplicate the fp_round to the arguments of the copysign, then we
  // eliminate the fp_round on Y.  The second step requires an additional
  // predicate to match the implementation above.
  if (N0.getOpcode() == ISD::FCOPYSIGN && N0->hasOneUse() &&
      CanCombineFCOPYSIGN_EXTEND_ROUND(VT,
                                       N0.getValueType())) {
    SDValue Tmp = DAG.getNode(ISD::FP_ROUND, SDLoc(N0), VT,
                              N0.getOperand(0), N1);
    AddToWorklist(Tmp.getNode());
    return DAG.getNode(ISD::FCOPYSIGN, DL, VT, Tmp, N0.getOperand(1));
  }

  if (SDValue NewVSel = matchVSelectOpSizesWithSetCC(N))
    return NewVSel;

  return SDValue();
}

SDValue DAGCombiner::visitFP_EXTEND(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  if (VT.isVector())
    if (SDValue FoldedVOp = SimplifyVCastOp(N, DL))
      return FoldedVOp;

  // If this is fp_round(fpextend), don't fold it, allow ourselves to be folded.
  if (N->hasOneUse() && N->use_begin()->getOpcode() == ISD::FP_ROUND)
    return SDValue();

  // fold (fp_extend c1fp) -> c1fp
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FP_EXTEND, DL, VT, {N0}))
    return C;

  // fold (fp_extend (fp16_to_fp op)) -> (fp16_to_fp op)
  if (N0.getOpcode() == ISD::FP16_TO_FP &&
      TLI.getOperationAction(ISD::FP16_TO_FP, VT) == TargetLowering::Legal)
    return DAG.getNode(ISD::FP16_TO_FP, DL, VT, N0.getOperand(0));

  // Turn fp_extend(fp_round(X, 1)) -> x since the fp_round doesn't affect the
  // value of X.
  if (N0.getOpcode() == ISD::FP_ROUND && N0.getConstantOperandVal(1) == 1) {
    SDValue In = N0.getOperand(0);
    if (In.getValueType() == VT) return In;
    if (VT.bitsLT(In.getValueType()))
      return DAG.getNode(ISD::FP_ROUND, DL, VT, In, N0.getOperand(1));
    return DAG.getNode(ISD::FP_EXTEND, DL, VT, In);
  }

  // fold (fpext (load x)) -> (fpext (fptrunc (extload x)))
  if (ISD::isNormalLoad(N0.getNode()) && N0.hasOneUse() &&
      TLI.isLoadExtLegalOrCustom(ISD::EXTLOAD, VT, N0.getValueType())) {
    LoadSDNode *LN0 = cast<LoadSDNode>(N0);
    SDValue ExtLoad = DAG.getExtLoad(ISD::EXTLOAD, DL, VT,
                                     LN0->getChain(),
                                     LN0->getBasePtr(), N0.getValueType(),
                                     LN0->getMemOperand());
    CombineTo(N, ExtLoad);
    CombineTo(
        N0.getNode(),
        DAG.getNode(ISD::FP_ROUND, SDLoc(N0), N0.getValueType(), ExtLoad,
                    DAG.getIntPtrConstant(1, SDLoc(N0), /*isTarget=*/true)),
        ExtLoad.getValue(1));
    return SDValue(N, 0);   // Return N so it doesn't get rechecked!
  }

  if (SDValue NewVSel = matchVSelectOpSizesWithSetCC(N))
    return NewVSel;

  return SDValue();
}

SDValue DAGCombiner::visitFCEIL(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);

  // fold (fceil c1) -> fceil(c1)
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FCEIL, SDLoc(N), VT, {N0}))
    return C;

  return SDValue();
}

SDValue DAGCombiner::visitFTRUNC(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);

  // fold (ftrunc c1) -> ftrunc(c1)
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FTRUNC, SDLoc(N), VT, {N0}))
    return C;

  // fold ftrunc (known rounded int x) -> x
  // ftrunc is a part of fptosi/fptoui expansion on some targets, so this is
  // likely to be generated to extract integer from a rounded floating value.
  switch (N0.getOpcode()) {
  default: break;
  case ISD::FRINT:
  case ISD::FTRUNC:
  case ISD::FNEARBYINT:
  case ISD::FROUNDEVEN:
  case ISD::FFLOOR:
  case ISD::FCEIL:
    return N0;
  }

  return SDValue();
}

SDValue DAGCombiner::visitFFREXP(SDNode *N) {
  SDValue N0 = N->getOperand(0);

  // fold (ffrexp c1) -> ffrexp(c1)
  if (DAG.isConstantFPBuildVectorOrConstantFP(N0))
    return DAG.getNode(ISD::FFREXP, SDLoc(N), N->getVTList(), N0);
  return SDValue();
}

SDValue DAGCombiner::visitFFLOOR(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);

  // fold (ffloor c1) -> ffloor(c1)
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FFLOOR, SDLoc(N), VT, {N0}))
    return C;

  return SDValue();
}

SDValue DAGCombiner::visitFNEG(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SelectionDAG::FlagInserter FlagsInserter(DAG, N);

  // Constant fold FNEG.
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FNEG, SDLoc(N), VT, {N0}))
    return C;

  if (SDValue NegN0 =
          TLI.getNegatedExpression(N0, DAG, LegalOperations, ForCodeSize))
    return NegN0;

  // -(X-Y) -> (Y-X) is unsafe because when X==Y, -0.0 != +0.0
  // FIXME: This is duplicated in getNegatibleCost, but getNegatibleCost doesn't
  // know it was called from a context with a nsz flag if the input fsub does
  // not.
  if (N0.getOpcode() == ISD::FSUB &&
      (DAG.getTarget().Options.NoSignedZerosFPMath ||
       N->getFlags().hasNoSignedZeros()) && N0.hasOneUse()) {
    return DAG.getNode(ISD::FSUB, SDLoc(N), VT, N0.getOperand(1),
                       N0.getOperand(0));
  }

  if (SDValue Cast = foldSignChangeInBitcast(N))
    return Cast;

  return SDValue();
}

SDValue DAGCombiner::visitFMinMax(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  EVT VT = N->getValueType(0);
  const SDNodeFlags Flags = N->getFlags();
  unsigned Opc = N->getOpcode();
  bool PropagatesNaN = Opc == ISD::FMINIMUM || Opc == ISD::FMAXIMUM;
  bool IsMin = Opc == ISD::FMINNUM || Opc == ISD::FMINIMUM;
  SelectionDAG::FlagInserter FlagsInserter(DAG, N);

  // Constant fold.
  if (SDValue C = DAG.FoldConstantArithmetic(Opc, SDLoc(N), VT, {N0, N1}))
    return C;

  // Canonicalize to constant on RHS.
  if (DAG.isConstantFPBuildVectorOrConstantFP(N0) &&
      !DAG.isConstantFPBuildVectorOrConstantFP(N1))
    return DAG.getNode(N->getOpcode(), SDLoc(N), VT, N1, N0);

  if (const ConstantFPSDNode *N1CFP = isConstOrConstSplatFP(N1)) {
    const APFloat &AF = N1CFP->getValueAPF();

    // minnum(X, nan) -> X
    // maxnum(X, nan) -> X
    // minimum(X, nan) -> nan
    // maximum(X, nan) -> nan
    if (AF.isNaN())
      return PropagatesNaN ? N->getOperand(1) : N->getOperand(0);

    // In the following folds, inf can be replaced with the largest finite
    // float, if the ninf flag is set.
    if (AF.isInfinity() || (Flags.hasNoInfs() && AF.isLargest())) {
      // minnum(X, -inf) -> -inf
      // maxnum(X, +inf) -> +inf
      // minimum(X, -inf) -> -inf if nnan
      // maximum(X, +inf) -> +inf if nnan
      if (IsMin == AF.isNegative() && (!PropagatesNaN || Flags.hasNoNaNs()))
        return N->getOperand(1);

      // minnum(X, +inf) -> X if nnan
      // maxnum(X, -inf) -> X if nnan
      // minimum(X, +inf) -> X
      // maximum(X, -inf) -> X
      if (IsMin != AF.isNegative() && (PropagatesNaN || Flags.hasNoNaNs()))
        return N->getOperand(0);
    }
  }

  if (SDValue SD = reassociateReduction(
          PropagatesNaN
              ? (IsMin ? ISD::VECREDUCE_FMINIMUM : ISD::VECREDUCE_FMAXIMUM)
              : (IsMin ? ISD::VECREDUCE_FMIN : ISD::VECREDUCE_FMAX),
          Opc, SDLoc(N), VT, N0, N1, Flags))
    return SD;

  return SDValue();
}

SDValue DAGCombiner::visitFABS(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  SDLoc DL(N);

  // fold (fabs c1) -> fabs(c1)
  if (SDValue C = DAG.FoldConstantArithmetic(ISD::FABS, DL, VT, {N0}))
    return C;

  // fold (fabs (fabs x)) -> (fabs x)
  if (N0.getOpcode() == ISD::FABS)
    return N->getOperand(0);

  // fold (fabs (fneg x)) -> (fabs x)
  // fold (fabs (fcopysign x, y)) -> (fabs x)
  if (N0.getOpcode() == ISD::FNEG || N0.getOpcode() == ISD::FCOPYSIGN)
    return DAG.getNode(ISD::FABS, DL, VT, N0.getOperand(0));

  if (SDValue Cast = foldSignChangeInBitcast(N))
    return Cast;

  return SDValue();
}

SDValue DAGCombiner::visitBRCOND(SDNode *N) {
  SDValue Chain = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue N2 = N->getOperand(2);

  // BRCOND(FREEZE(cond)) is equivalent to BRCOND(cond) (both are
  // nondeterministic jumps).
  if (N1->getOpcode() == ISD::FREEZE && N1.hasOneUse()) {
    return DAG.getNode(ISD::BRCOND, SDLoc(N), MVT::Other, Chain,
                       N1->getOperand(0), N2, N->getFlags());
  }

  // Variant of the previous fold where there is a SETCC in between:
  //   BRCOND(SETCC(FREEZE(X), CONST, Cond))
  // =>
  //   BRCOND(FREEZE(SETCC(X, CONST, Cond)))
  // =>
  //   BRCOND(SETCC(X, CONST, Cond))
  // This is correct if FREEZE(X) has one use and SETCC(FREEZE(X), CONST, Cond)
  // isn't equivalent to true or false.
  // For example, SETCC(FREEZE(X), -128, SETULT) cannot be folded to
  // FREEZE(SETCC(X, -128, SETULT)) because X can be poison.
  if (N1->getOpcode() == ISD::SETCC && N1.hasOneUse()) {
    SDValue S0 = N1->getOperand(0), S1 = N1->getOperand(1);
    ISD::CondCode Cond = cast<CondCodeSDNode>(N1->getOperand(2))->get();
    ConstantSDNode *S0C = dyn_cast<ConstantSDNode>(S0);
    ConstantSDNode *S1C = dyn_cast<ConstantSDNode>(S1);
    bool Updated = false;

    // Is 'X Cond C' always true or false?
    auto IsAlwaysTrueOrFalse = [](ISD::CondCode Cond, ConstantSDNode *C) {
      bool False = (Cond == ISD::SETULT && C->isZero()) ||
                   (Cond == ISD::SETLT && C->isMinSignedValue()) ||
                   (Cond == ISD::SETUGT && C->isAllOnes()) ||
                   (Cond == ISD::SETGT && C->isMaxSignedValue());
      bool True = (Cond == ISD::SETULE && C->isAllOnes()) ||
                  (Cond == ISD::SETLE && C->isMaxSignedValue()) ||
                  (Cond == ISD::SETUGE && C->isZero()) ||
                  (Cond == ISD::SETGE && C->isMinSignedValue());
      return True || False;
    };

    if (S0->getOpcode() == ISD::FREEZE && S0.hasOneUse() && S1C) {
      if (!IsAlwaysTrueOrFalse(Cond, S1C)) {
        S0 = S0->getOperand(0);
        Updated = true;
      }
    }
    if (S1->getOpcode() == ISD::FREEZE && S1.hasOneUse() && S0C) {
      if (!IsAlwaysTrueOrFalse(ISD::getSetCCSwappedOperands(Cond), S0C)) {
        S1 = S1->getOperand(0);
        Updated = true;
      }
    }

    if (Updated)
      return DAG.getNode(
          ISD::BRCOND, SDLoc(N), MVT::Other, Chain,
          DAG.getSetCC(SDLoc(N1), N1->getValueType(0), S0, S1, Cond), N2,
          N->getFlags());
  }

  // If N is a constant we could fold this into a fallthrough or unconditional
  // branch. However that doesn't happen very often in normal code, because
  // Instcombine/SimplifyCFG should have handled the available opportunities.
  // If we did this folding here, it would be necessary to update the
  // MachineBasicBlock CFG, which is awkward.

  // fold a brcond with a setcc condition into a BR_CC node if BR_CC is legal
  // on the target.
  if (N1.getOpcode() == ISD::SETCC &&
      TLI.isOperationLegalOrCustom(ISD::BR_CC,
                                   N1.getOperand(0).getValueType())) {
    return DAG.getNode(ISD::BR_CC, SDLoc(N), MVT::Other,
                       Chain, N1.getOperand(2),
                       N1.getOperand(0), N1.getOperand(1), N2);
  }

  if (N1.hasOneUse()) {
    // rebuildSetCC calls visitXor which may change the Chain when there is a
    // STRICT_FSETCC/STRICT_FSETCCS involved. Use a handle to track changes.
    HandleSDNode ChainHandle(Chain);
    if (SDValue NewN1 = rebuildSetCC(N1))
      return DAG.getNode(ISD::BRCOND, SDLoc(N), MVT::Other,
                         ChainHandle.getValue(), NewN1, N2, N->getFlags());
  }

  return SDValue();
}

SDValue DAGCombiner::rebuildSetCC(SDValue N) {
  if (N.getOpcode() == ISD::SRL ||
      (N.getOpcode() == ISD::TRUNCATE &&
       (N.getOperand(0).hasOneUse() &&
        N.getOperand(0).getOpcode() == ISD::SRL))) {
    // Look pass the truncate.
    if (N.getOpcode() == ISD::TRUNCATE)
      N = N.getOperand(0);

    // Match this pattern so that we can generate simpler code:
    //
    //   %a = ...
    //   %b = and i32 %a, 2
    //   %c = srl i32 %b, 1
    //   brcond i32 %c ...
    //
    // into
    //
    //   %a = ...
    //   %b = and i32 %a, 2
    //   %c = setcc eq %b, 0
    //   brcond %c ...
    //
    // This applies only when the AND constant value has one bit set and the
    // SRL constant is equal to the log2 of the AND constant. The back-end is
    // smart enough to convert the result into a TEST/JMP sequence.
    SDValue Op0 = N.getOperand(0);
    SDValue Op1 = N.getOperand(1);

    if (Op0.getOpcode() == ISD::AND && Op1.getOpcode() == ISD::Constant) {
      SDValue AndOp1 = Op0.getOperand(1);

      if (AndOp1.getOpcode() == ISD::Constant) {
        const APInt &AndConst = AndOp1->getAsAPIntVal();

        if (AndConst.isPowerOf2() &&
            Op1->getAsAPIntVal() == AndConst.logBase2()) {
          SDLoc DL(N);
          return DAG.getSetCC(DL, getSetCCResultType(Op0.getValueType()),
                              Op0, DAG.getConstant(0, DL, Op0.getValueType()),
                              ISD::SETNE);
        }
      }
    }
  }

  // Transform (brcond (xor x, y)) -> (brcond (setcc, x, y, ne))
  // Transform (brcond (xor (xor x, y), -1)) -> (brcond (setcc, x, y, eq))
  if (N.getOpcode() == ISD::XOR) {
    // Because we may call this on a speculatively constructed
    // SimplifiedSetCC Node, we need to simplify this node first.
    // Ideally this should be folded into SimplifySetCC and not
    // here. For now, grab a handle to N so we don't lose it from
    // replacements interal to the visit.
    HandleSDNode XORHandle(N);
    while (N.getOpcode() == ISD::XOR) {
      SDValue Tmp = visitXOR(N.getNode());
      // No simplification done.
      if (!Tmp.getNode())
        break;
      // Returning N is form in-visit replacement that may invalidated
      // N. Grab value from Handle.
      if (Tmp.getNode() == N.getNode())
        N = XORHandle.getValue();
      else // Node simplified. Try simplifying again.
        N = Tmp;
    }

    if (N.getOpcode() != ISD::XOR)
      return N;

    SDValue Op0 = N->getOperand(0);
    SDValue Op1 = N->getOperand(1);

    if (Op0.getOpcode() != ISD::SETCC && Op1.getOpcode() != ISD::SETCC) {
      bool Equal = false;
      // (brcond (xor (xor x, y), -1)) -> (brcond (setcc x, y, eq))
      if (isBitwiseNot(N) && Op0.hasOneUse() && Op0.getOpcode() == ISD::XOR &&
          Op0.getValueType() == MVT::i1) {
        N = Op0;
        Op0 = N->getOperand(0);
        Op1 = N->getOperand(1);
        Equal = true;
      }

      EVT SetCCVT = N.getValueType();
      if (LegalTypes)
        SetCCVT = getSetCCResultType(SetCCVT);
      // Replace the uses of XOR with SETCC
      return DAG.getSetCC(SDLoc(N), SetCCVT, Op0, Op1,
                          Equal ? ISD::SETEQ : ISD::SETNE);
    }
  }

  return SDValue();
}

// Operand List for BR_CC: Chain, CondCC, CondLHS, CondRHS, DestBB.
//
SDValue DAGCombiner::visitBR_CC(SDNode *N) {
  CondCodeSDNode *CC = cast<CondCodeSDNode>(N->getOperand(1));
  SDValue CondLHS = N->getOperand(2), CondRHS = N->getOperand(3);

  // If N is a constant we could fold this into a fallthrough or unconditional
  // branch. However that doesn't happen very often in normal code, because
  // Instcombine/SimplifyCFG should have handled the available opportunities.
  // If we did this folding here, it would be necessary to update the
  // MachineBasicBlock CFG, which is awkward.

  // Use SimplifySetCC to simplify SETCC's.
  SDValue Simp = SimplifySetCC(getSetCCResultType(CondLHS.getValueType()),
                               CondLHS, CondRHS, CC->get(), SDLoc(N),
                               false);
  if (Simp.getNode()) AddToWorklist(Simp.getNode());

  // fold to a simpler setcc
  if (Simp.getNode() && Simp.getOpcode() == ISD::SETCC)
    return DAG.getNode(ISD::BR_CC, SDLoc(N), MVT::Other,
                       N->getOperand(0), Simp.getOperand(2),
                       Simp.getOperand(0), Simp.getOperand(1),
                       N->getOperand(4));

  return SDValue();
}

static bool getCombineLoadStoreParts(SDNode *N, unsigned Inc, unsigned Dec,
                                     bool &IsLoad, bool &IsMasked, SDValue &Ptr,
                                     const TargetLowering &TLI) {
  if (LoadSDNode *LD = dyn_cast<LoadSDNode>(N)) {
    if (LD->isIndexed())
      return false;
    EVT VT = LD->getMemoryVT();
    if (!TLI.isIndexedLoadLegal(Inc, VT) && !TLI.isIndexedLoadLegal(Dec, VT))
      return false;
    Ptr = LD->getBasePtr();
  } else if (StoreSDNode *ST = dyn_cast<StoreSDNode>(N)) {
    if (ST->isIndexed())
      return false;
    EVT VT = ST->getMemoryVT();
    if (!TLI.isIndexedStoreLegal(Inc, VT) && !TLI.isIndexedStoreLegal(Dec, VT))
      return false;
    Ptr = ST->getBasePtr();
    IsLoad = false;
  } else if (MaskedLoadSDNode *LD = dyn_cast<MaskedLoadSDNode>(N)) {
    if (LD->isIndexed())
      return false;
    EVT VT = LD->getMemoryVT();
    if (!TLI.isIndexedMaskedLoadLegal(Inc, VT) &&
        !TLI.isIndexedMaskedLoadLegal(Dec, VT))
      return false;
    Ptr = LD->getBasePtr();
    IsMasked = true;
  } else if (MaskedStoreSDNode *ST = dyn_cast<MaskedStoreSDNode>(N)) {
    if (ST->isIndexed())
      return false;
    EVT VT = ST->getMemoryVT();
    if (!TLI.isIndexedMaskedStoreLegal(Inc, VT) &&
        !TLI.isIndexedMaskedStoreLegal(Dec, VT))
      return false;
    Ptr = ST->getBasePtr();
    IsLoad = false;
    IsMasked = true;
  } else {
    return false;
  }
  return true;
}

/// Try turning a load/store into a pre-indexed load/store when the base
/// pointer is an add or subtract and it has other uses besides the load/store.
/// After the transformation, the new indexed load/store has effectively folded
/// the add/subtract in and all of its other uses are redirected to the
/// new load/store.
bool DAGCombiner::CombineToPreIndexedLoadStore(SDNode *N) {
  if (Level < AfterLegalizeDAG)
    return false;

  bool IsLoad = true;
  bool IsMasked = false;
  SDValue Ptr;
  if (!getCombineLoadStoreParts(N, ISD::PRE_INC, ISD::PRE_DEC, IsLoad, IsMasked,
                                Ptr, TLI))
    return false;

  // If the pointer is not an add/sub, or if it doesn't have multiple uses, bail
  // out.  There is no reason to make this a preinc/predec.
  if ((Ptr.getOpcode() != ISD::ADD && Ptr.getOpcode() != ISD::SUB) ||
      Ptr->hasOneUse())
    return false;

  // Ask the target to do addressing mode selection.
  SDValue BasePtr;
  SDValue Offset;
  ISD::MemIndexedMode AM = ISD::UNINDEXED;
  if (!TLI.getPreIndexedAddressParts(N, BasePtr, Offset, AM, DAG))
    return false;

  // Backends without true r+i pre-indexed forms may need to pass a
  // constant base with a variable offset so that constant coercion
  // will work with the patterns in canonical form.
  bool Swapped = false;
  if (isa<ConstantSDNode>(BasePtr)) {
    std::swap(BasePtr, Offset);
    Swapped = true;
  }

  // Don't create a indexed load / store with zero offset.
  if (isNullConstant(Offset))
    return false;

  // Try turning it into a pre-indexed load / store except when:
  // 1) The new base ptr is a frame index.
  // 2) If N is a store and the new base ptr is either the same as or is a
  //    predecessor of the value being stored.
  // 3) Another use of old base ptr is a predecessor of N. If ptr is folded
  //    that would create a cycle.
  // 4) All uses are load / store ops that use it as old base ptr.

  // Check #1.  Preinc'ing a frame index would require copying the stack pointer
  // (plus the implicit offset) to a register to preinc anyway.
  if (isa<FrameIndexSDNode>(BasePtr) || isa<RegisterSDNode>(BasePtr))
    return false;

  // Check #2.
  if (!IsLoad) {
    SDValue Val = IsMasked ? cast<MaskedStoreSDNode>(N)->getValue()
                           : cast<StoreSDNode>(N)->getValue();

    // Would require a copy.
    if (Val == BasePtr)
      return false;

    // Would create a cycle.
    if (Val == Ptr || Ptr->isPredecessorOf(Val.getNode()))
      return false;
  }

  // Caches for hasPredecessorHelper.
  SmallPtrSet<const SDNode *, 32> Visited;
  SmallVector<const SDNode *, 16> Worklist;
  Worklist.push_back(N);

  // If the offset is a constant, there may be other adds of constants that
  // can be folded with this one. We should do this to avoid having to keep
  // a copy of the original base pointer.
  SmallVector<SDNode *, 16> OtherUses;
  if (isa<ConstantSDNode>(Offset))
    for (SDNode::use_iterator UI = BasePtr->use_begin(),
                              UE = BasePtr->use_end();
         UI != UE; ++UI) {
      SDUse &Use = UI.getUse();
      // Skip the use that is Ptr and uses of other results from BasePtr's
      // node (important for nodes that return multiple results).
      if (Use.getUser() == Ptr.getNode() || Use != BasePtr)
        continue;

      if (SDNode::hasPredecessorHelper(Use.getUser(), Visited, Worklist,
                                       MaxSteps))
        continue;

      if (Use.getUser()->getOpcode() != ISD::ADD &&
          Use.getUser()->getOpcode() != ISD::SUB) {
        OtherUses.clear();
        break;
      }

      SDValue Op1 = Use.getUser()->getOperand((UI.getOperandNo() + 1) & 1);
      if (!isa<ConstantSDNode>(Op1)) {
        OtherUses.clear();
        break;
      }

      // FIXME: In some cases, we can be smarter about this.
      if (Op1.getValueType() != Offset.getValueType()) {
        OtherUses.clear();
        break;
      }

      OtherUses.push_back(Use.getUser());
    }

  if (Swapped)
    std::swap(BasePtr, Offset);

  // Now check for #3 and #4.
  bool RealUse = false;

  for (SDNode *Use : Ptr->uses()) {
    if (Use == N)
      continue;
    if (SDNode::hasPredecessorHelper(Use, Visited, Worklist, MaxSteps))
      return false;

    // If Ptr may be folded in addressing mode of other use, then it's
    // not profitable to do this transformation.
    if (!canFoldInAddressingMode(Ptr.getNode(), Use, DAG, TLI))
      RealUse = true;
  }

  if (!RealUse)
    return false;

  SDValue Result;
  if (!IsMasked) {
    if (IsLoad)
      Result = DAG.getIndexedLoad(SDValue(N, 0), SDLoc(N), BasePtr, Offset, AM);
    else
      Result =
          DAG.getIndexedStore(SDValue(N, 0), SDLoc(N), BasePtr, Offset, AM);
  } else {
    if (IsLoad)
      Result = DAG.getIndexedMaskedLoad(SDValue(N, 0), SDLoc(N), BasePtr,
                                        Offset, AM);
    else
      Result = DAG.getIndexedMaskedStore(SDValue(N, 0), SDLoc(N), BasePtr,
                                         Offset, AM);
  }
  ++PreIndexedNodes;
  ++NodesCombined;
  LLVM_DEBUG(dbgs() << "\nReplacing.4 "; N->dump(&DAG); dbgs() << "\nWith: ";
             Result.dump(&DAG); dbgs() << '\n');
  WorklistRemover DeadNodes(*this);
  if (IsLoad) {
    DAG.ReplaceAllUsesOfValueWith(SDValue(N, 0), Result.getValue(0));
    DAG.ReplaceAllUsesOfValueWith(SDValue(N, 1), Result.getValue(2));
  } else {
    DAG.ReplaceAllUsesOfValueWith(SDValue(N, 0), Result.getValue(1));
  }

  // Finally, since the node is now dead, remove it from the graph.
  deleteAndRecombine(N);

  if (Swapped)
    std::swap(BasePtr, Offset);

  // Replace other uses of BasePtr that can be updated to use Ptr
  for (unsigned i = 0, e = OtherUses.size(); i != e; ++i) {
    unsigned OffsetIdx = 1;
    if (OtherUses[i]->getOperand(OffsetIdx).getNode() == BasePtr.getNode())
      OffsetIdx = 0;
    assert(OtherUses[i]->getOperand(!OffsetIdx).getNode() ==
           BasePtr.getNode() && "Expected BasePtr operand");

    // We need to replace ptr0 in the following expression:
    //   x0 * offset0 + y0 * ptr0 = t0
    // knowing that
    //   x1 * offset1 + y1 * ptr0 = t1 (the indexed load/store)
    //
    // where x0, x1, y0 and y1 in {-1, 1} are given by the types of the
    // indexed load/store and the expression that needs to be re-written.
    //
    // Therefore, we have:
    //   t0 = (x0 * offset0 - x1 * y0 * y1 *offset1) + (y0 * y1) * t1

    auto *CN = cast<ConstantSDNode>(OtherUses[i]->getOperand(OffsetIdx));
    const APInt &Offset0 = CN->getAPIntValue();
    const APInt &Offset1 = Offset->getAsAPIntVal();
    int X0 = (OtherUses[i]->getOpcode() == ISD::SUB && OffsetIdx == 1) ? -1 : 1;
    int Y0 = (OtherUses[i]->getOpcode() == ISD::SUB && OffsetIdx == 0) ? -1 : 1;
    int X1 = (AM == ISD::PRE_DEC && !Swapped) ? -1 : 1;
    int Y1 = (AM == ISD::PRE_DEC && Swapped) ? -1 : 1;

    unsigned Opcode = (Y0 * Y1 < 0) ? ISD::SUB : ISD::ADD;

    APInt CNV = Offset0;
    if (X0 < 0) CNV = -CNV;
    if (X1 * Y0 * Y1 < 0) CNV = CNV + Offset1;
    else CNV = CNV - Offset1;

    SDLoc DL(OtherUses[i]);

    // We can now generate the new expression.
    SDValue NewOp1 = DAG.getConstant(CNV, DL, CN->getValueType(0));
    SDValue NewOp2 = Result.getValue(IsLoad ? 1 : 0);

    SDValue NewUse = DAG.getNode(Opcode,
                                 DL,
                                 OtherUses[i]->getValueType(0), NewOp1, NewOp2);
    DAG.ReplaceAllUsesOfValueWith(SDValue(OtherUses[i], 0), NewUse);
    deleteAndRecombine(OtherUses[i]);
  }

  // Replace the uses of Ptr with uses of the updated base value.
  DAG.ReplaceAllUsesOfValueWith(Ptr, Result.getValue(IsLoad ? 1 : 0));
  deleteAndRecombine(Ptr.getNode());
  AddToWorklist(Result.getNode());

  return true;
}

static bool shouldCombineToPostInc(SDNode *N, SDValue Ptr, SDNode *PtrUse,
                                   SDValue &BasePtr, SDValue &Offset,
                                   ISD::MemIndexedMode &AM,
                                   SelectionDAG &DAG,
                                   const TargetLowering &TLI) {
  if (PtrUse == N ||
      (PtrUse->getOpcode() != ISD::ADD && PtrUse->getOpcode() != ISD::SUB))
    return false;

  if (!TLI.getPostIndexedAddressParts(N, PtrUse, BasePtr, Offset, AM, DAG))
    return false;

  // Don't create a indexed load / store with zero offset.
  if (isNullConstant(Offset))
    return false;

  if (isa<FrameIndexSDNode>(BasePtr) || isa<RegisterSDNode>(BasePtr))
    return false;

  SmallPtrSet<const SDNode *, 32> Visited;
  for (SDNode *Use : BasePtr->uses()) {
    if (Use == Ptr.getNode())
      continue;

    // No if there's a later user which could perform the index instead.
    if (isa<MemSDNode>(Use)) {
      bool IsLoad = true;
      bool IsMasked = false;
      SDValue OtherPtr;
      if (getCombineLoadStoreParts(Use, ISD::POST_INC, ISD::POST_DEC, IsLoad,
                                   IsMasked, OtherPtr, TLI)) {
        SmallVector<const SDNode *, 2> Worklist;
        Worklist.push_back(Use);
        if (SDNode::hasPredecessorHelper(N, Visited, Worklist, MaxSteps))
          return false;
      }
    }

    // If all the uses are load / store addresses, then don't do the
    // transformation.
    if (Use->getOpcode() == ISD::ADD || Use->getOpcode() == ISD::SUB) {
      for (SDNode *UseUse : Use->uses())
        if (canFoldInAddressingMode(Use, UseUse, DAG, TLI))
          return false;
    }
  }
  return true;
}

static SDNode *getPostIndexedLoadStoreOp(SDNode *N, bool &IsLoad,
                                         bool &IsMasked, SDValue &Ptr,
                                         SDValue &BasePtr, SDValue &Offset,
                                         ISD::MemIndexedMode &AM,
                                         SelectionDAG &DAG,
                                         const TargetLowering &TLI) {
  if (!getCombineLoadStoreParts(N, ISD::POST_INC, ISD::POST_DEC, IsLoad,
                                IsMasked, Ptr, TLI) ||
      Ptr->hasOneUse())
    return nullptr;

  // Try turning it into a post-indexed load / store except when
  // 1) All uses are load / store ops that use it as base ptr (and
  //    it may be folded as addressing mmode).
  // 2) Op must be independent of N, i.e. Op is neither a predecessor
  //    nor a successor of N. Otherwise, if Op is folded that would
  //    create a cycle.
  for (SDNode *Op : Ptr->uses()) {
    // Check for #1.
    if (!shouldCombineToPostInc(N, Ptr, Op, BasePtr, Offset, AM, DAG, TLI))
      continue;

    // Check for #2.
    SmallPtrSet<const SDNode *, 32> Visited;
    SmallVector<const SDNode *, 8> Worklist;
    // Ptr is predecessor to both N and Op.
    Visited.insert(Ptr.getNode());
    Worklist.push_back(N);
    Worklist.push_back(Op);
    if (!SDNode::hasPredecessorHelper(N, Visited, Worklist, MaxSteps) &&
        !SDNode::hasPredecessorHelper(Op, Visited, Worklist, MaxSteps))
      return Op;
  }
  return nullptr;
}

/// Try to combine a load/store with a add/sub of the base pointer node into a
/// post-indexed load/store. The transformation folded the add/subtract into the
/// new indexed load/store effectively and all of its uses are redirected to the
/// new load/store.
bool DAGCombiner::CombineToPostIndexedLoadStore(SDNode *N) {
  if (Level < AfterLegalizeDAG)
    return false;

  bool IsLoad = true;
  bool IsMasked = false;
  SDValue Ptr;
  SDValue BasePtr;
  SDValue Offset;
  ISD::MemIndexedMode AM = ISD::UNINDEXED;
  SDNode *Op = getPostIndexedLoadStoreOp(N, IsLoad, IsMasked, Ptr, BasePtr,
                                         Offset, AM, DAG, TLI);
  if (!Op)
    return false;

  SDValue Result;
  if (!IsMasked)
    Result = IsLoad ? DAG.getIndexedLoad(SDValue(N, 0), SDLoc(N), BasePtr,
                                         Offset, AM)
                    : DAG.getIndexedStore(SDValue(N, 0), SDLoc(N),
                                          BasePtr, Offset, AM);
  else
    Result = IsLoad ? DAG.getIndexedMaskedLoad(SDValue(N, 0), SDLoc(N),
                                               BasePtr, Offset, AM)
                    : DAG.getIndexedMaskedStore(SDValue(N, 0), SDLoc(N),
                                                BasePtr, Offset, AM);
  ++PostIndexedNodes;
  ++NodesCombined;
  LLVM_DEBUG(dbgs() << "\nReplacing.5 "; N->dump(&DAG); dbgs() << "\nWith: ";
             Result.dump(&DAG); dbgs() << '\n');
  WorklistRemover DeadNodes(*this);
  if (IsLoad) {
    DAG.ReplaceAllUsesOfValueWith(SDValue(N, 0), Result.getValue(0));
    DAG.ReplaceAllUsesOfValueWith(SDValue(N, 1), Result.getValue(2));
  } else {
    DAG.ReplaceAllUsesOfValueWith(SDValue(N, 0), Result.getValue(1));
  }

  // Finally, since the node is now dead, remove it from the graph.
  deleteAndRecombine(N);

  // Replace the uses of Use with uses of the updated base value.
  DAG.ReplaceAllUsesOfValueWith(SDValue(Op, 0),
                                Result.getValue(IsLoad ? 1 : 0));
  deleteAndRecombine(Op);
  return true;
}

/// Return the base-pointer arithmetic from an indexed \p LD.
SDValue DAGCombiner::SplitIndexingFromLoad(LoadSDNode *LD) {
  ISD::MemIndexedMode AM = LD->getAddressingMode();
  assert(AM != ISD::UNINDEXED);
  SDValue BP = LD->getOperand(1);
  SDValue Inc = LD->getOperand(2);

  // Some backends use TargetConstants for load offsets, but don't expect
  // TargetConstants in general ADD nodes. We can convert these constants into
  // regular Constants (if the constant is not opaque).
  assert((Inc.getOpcode() != ISD::TargetConstant ||
          !cast<ConstantSDNode>(Inc)->isOpaque()) &&
         "Cannot split out indexing using opaque target constants");
  if (Inc.getOpcode() == ISD::TargetConstant) {
    ConstantSDNode *ConstInc = cast<ConstantSDNode>(Inc);
    Inc = DAG.getConstant(*ConstInc->getConstantIntValue(), SDLoc(Inc),
                          ConstInc->getValueType(0));
  }

  unsigned Opc =
      (AM == ISD::PRE_INC || AM == ISD::POST_INC ? ISD::ADD : ISD::SUB);
  return DAG.getNode(Opc, SDLoc(LD), BP.getSimpleValueType(), BP, Inc);
}

static inline ElementCount numVectorEltsOrZero(EVT T) {
  return T.isVector() ? T.getVectorElementCount() : ElementCount::getFixed(0);
}

bool DAGCombiner::getTruncatedStoreValue(StoreSDNode *ST, SDValue &Val) {
  EVT STType = Val.getValueType();
  EVT STMemType = ST->getMemoryVT();
  if (STType == STMemType)
    return true;
  if (isTypeLegal(STMemType))
    return false; // fail.
  if (STType.isFloatingPoint() && STMemType.isFloatingPoint() &&
      TLI.isOperationLegal(ISD::FTRUNC, STMemType)) {
    Val = DAG.getNode(ISD::FTRUNC, SDLoc(ST), STMemType, Val);
    return true;
  }
  if (numVectorEltsOrZero(STType) == numVectorEltsOrZero(STMemType) &&
      STType.isInteger() && STMemType.isInteger()) {
    Val = DAG.getNode(ISD::TRUNCATE, SDLoc(ST), STMemType, Val);
    return true;
  }
  if (STType.getSizeInBits() == STMemType.getSizeInBits()) {
    Val = DAG.getBitcast(STMemType, Val);
    return true;
  }
  return false; // fail.
}

bool DAGCombiner::extendLoadedValueToExtension(LoadSDNode *LD, SDValue &Val) {
  EVT LDMemType = LD->getMemoryVT();
  EVT LDType = LD->getValueType(0);
  assert(Val.getValueType() == LDMemType &&
         "Attempting to extend value of non-matching type");
  if (LDType == LDMemType)
    return true;
  if (LDMemType.isInteger() && LDType.isInteger()) {
    switch (LD->getExtensionType()) {
    case ISD::NON_EXTLOAD:
      Val = DAG.getBitcast(LDType, Val);
      return true;
    case ISD::EXTLOAD:
      Val = DAG.getNode(ISD::ANY_EXTEND, SDLoc(LD), LDType, Val);
      return true;
    case ISD::SEXTLOAD:
      Val = DAG.getNode(ISD::SIGN_EXTEND, SDLoc(LD), LDType, Val);
      return true;
    case ISD::ZEXTLOAD:
      Val = DAG.getNode(ISD::ZERO_EXTEND, SDLoc(LD), LDType, Val);
      return true;
    }
  }
  return false;
}

StoreSDNode *DAGCombiner::getUniqueStoreFeeding(LoadSDNode *LD,
                                                int64_t &Offset) {
  SDValue Chain = LD->getOperand(0);

  // Look through CALLSEQ_START.
  if (Chain.getOpcode() == ISD::CALLSEQ_START)
    Chain = Chain->getOperand(0);

  StoreSDNode *ST = nullptr;
  SmallVector<SDValue, 8> Aliases;
  if (Chain.getOpcode() == ISD::TokenFactor) {
    // Look for unique store within the TokenFactor.
    for (SDValue Op : Chain->ops()) {
      StoreSDNode *Store = dyn_cast<StoreSDNode>(Op.getNode());
      if (!Store)
        continue;
      BaseIndexOffset BasePtrLD = BaseIndexOffset::match(LD, DAG);
      BaseIndexOffset BasePtrST = BaseIndexOffset::match(Store, DAG);
      if (!BasePtrST.equalBaseIndex(BasePtrLD, DAG, Offset))
        continue;
      // Make sure the store is not aliased with any nodes in TokenFactor.
      GatherAllAliases(Store, Chain, Aliases);
      if (Aliases.empty() ||
          (Aliases.size() == 1 && Aliases.front().getNode() == Store))
        ST = Store;
      break;
    }
  } else {
    StoreSDNode *Store = dyn_cast<StoreSDNode>(Chain.getNode());
    if (Store) {
      BaseIndexOffset BasePtrLD = BaseIndexOffset::match(LD, DAG);
      BaseIndexOffset BasePtrST = BaseIndexOffset::match(Store, DAG);
      if (BasePtrST.equalBaseIndex(BasePtrLD, DAG, Offset))
        ST = Store;
    }
  }

  return ST;
}

SDValue DAGCombiner::ForwardStoreValueToDirectLoad(LoadSDNode *LD) {
  if (OptLevel == CodeGenOptLevel::None || !LD->isSimple())
    return SDValue();
  SDValue Chain = LD->getOperand(0);
  int64_t Offset;

  StoreSDNode *ST = getUniqueStoreFeeding(LD, Offset);
  // TODO: Relax this restriction for unordered atomics (see D66309)
  if (!ST || !ST->isSimple() || ST->getAddressSpace() != LD->getAddressSpace())
    return SDValue();

  EVT LDType = LD->getValueType(0);
  EVT LDMemType = LD->getMemoryVT();
  EVT STMemType = ST->getMemoryVT();
  EVT STType = ST->getValue().getValueType();

  // There are two cases to consider here:
  //  1. The store is fixed width and the load is scalable. In this case we
  //     don't know at compile time if the store completely envelops the load
  //     so we abandon the optimisation.
  //  2. The store is scalable and the load is fixed width. We could
  //     potentially support a limited number of cases here, but there has been
  //     no cost-benefit analysis to prove it's worth it.
  bool LdStScalable = LDMemType.isScalableVT();
  if (LdStScalable != STMemType.isScalableVT())
    return SDValue();

  // If we are dealing with scalable vectors on a big endian platform the
  // calculation of offsets below becomes trickier, since we do not know at
  // compile time the absolute size of the vector. Until we've done more
  // analysis on big-endian platforms it seems better to bail out for now.
  if (LdStScalable && DAG.getDataLayout().isBigEndian())
    return SDValue();

  // Normalize for Endianness. After this Offset=0 will denote that the least
  // significant bit in the loaded value maps to the least significant bit in
  // the stored value). With Offset=n (for n > 0) the loaded value starts at the
  // n:th least significant byte of the stored value.
  int64_t OrigOffset = Offset;
  if (DAG.getDataLayout().isBigEndian())
    Offset = ((int64_t)STMemType.getStoreSizeInBits().getFixedValue() -
              (int64_t)LDMemType.getStoreSizeInBits().getFixedValue()) /
                 8 -
             Offset;

  // Check that the stored value cover all bits that are loaded.
  bool STCoversLD;

  TypeSize LdMemSize = LDMemType.getSizeInBits();
  TypeSize StMemSize = STMemType.getSizeInBits();
  if (LdStScalable)
    STCoversLD = (Offset == 0) && LdMemSize == StMemSize;
  else
    STCoversLD = (Offset >= 0) && (Offset * 8 + LdMemSize.getFixedValue() <=
                                   StMemSize.getFixedValue());

  auto ReplaceLd = [&](LoadSDNode *LD, SDValue Val, SDValue Chain) -> SDValue {
    if (LD->isIndexed()) {
      // Cannot handle opaque target constants and we must respect the user's
      // request not to split indexes from loads.
      if (!canSplitIdx(LD))
        return SDValue();
      SDValue Idx = SplitIndexingFromLoad(LD);
      SDValue Ops[] = {Val, Idx, Chain};
      return CombineTo(LD, Ops, 3);
    }
    return CombineTo(LD, Val, Chain);
  };

  if (!STCoversLD)
    return SDValue();

  // Memory as copy space (potentially masked).
  if (Offset == 0 && LDType == STType && STMemType == LDMemType) {
    // Simple case: Direct non-truncating forwarding
    if (LDType.getSizeInBits() == LdMemSize)
      return ReplaceLd(LD, ST->getValue(), Chain);
    // Can we model the truncate and extension with an and mask?
    if (STType.isInteger() && LDMemType.isInteger() && !STType.isVector() &&
        !LDMemType.isVector() && LD->getExtensionType() != ISD::SEXTLOAD) {
      // Mask to size of LDMemType
      auto Mask =
          DAG.getConstant(APInt::getLowBitsSet(STType.getFixedSizeInBits(),
                                               StMemSize.getFixedValue()),
                          SDLoc(ST), STType);
      auto Val = DAG.getNode(ISD::AND, SDLoc(LD), LDType, ST->getValue(), Mask);
      return ReplaceLd(LD, Val, Chain);
    }
  }

  // Handle some cases for big-endian that would be Offset 0 and handled for
  // little-endian.
  SDValue Val = ST->getValue();
  if (DAG.getDataLayout().isBigEndian() && Offset > 0 && OrigOffset == 0) {
    if (STType.isInteger() && !STType.isVector() && LDType.isInteger() &&
        !LDType.isVector() && isTypeLegal(STType) &&
        TLI.isOperationLegal(ISD::SRL, STType)) {
      Val = DAG.getNode(ISD::SRL, SDLoc(LD), STType, Val,
                        DAG.getConstant(Offset * 8, SDLoc(LD), STType));
      Offset = 0;
    }
  }

  // TODO: Deal with nonzero offset.
  if (LD->getBasePtr().isUndef() || Offset != 0)
    return SDValue();
  // Model necessary truncations / extenstions.
  // Truncate Value To Stored Memory Size.
  do {
    if (!getTruncatedStoreValue(ST, Val))
      break;
    if (!isTypeLegal(LDMemType))
      break;
    if (STMemType != LDMemType) {
      // TODO: Support vectors? This requires extract_subvector/bitcast.
      if (!STMemType.isVector() && !LDMemType.isVector() &&
          STMemType.isInteger() && LDMemType.isInteger())
        Val = DAG.getNode(ISD::TRUNCATE, SDLoc(LD), LDMemType, Val);
      else
        break;
    }
    if (!extendLoadedValueToExtension(LD, Val))
      break;
    return ReplaceLd(LD, Val, Chain);
  } while (false);

  // On failure, cleanup dead nodes we may have created.
  if (Val->use_empty())
    deleteAndRecombine(Val.getNode());
  return SDValue();
}

SDValue DAGCombiner::visitLOAD(SDNode *N) {
  LoadSDNode *LD  = cast<LoadSDNode>(N);
  SDValue Chain = LD->getChain();
  SDValue Ptr   = LD->getBasePtr();

  // If load is not volatile and there are no uses of the loaded value (and
  // the updated indexed value in case of indexed loads), change uses of the
  // chain value into uses of the chain input (i.e. delete the dead load).
  // TODO: Allow this for unordered atomics (see D66309)
  if (LD->isSimple()) {
    if (N->getValueType(1) == MVT::Other) {
      // Unindexed loads.
      if (!N->hasAnyUseOfValue(0)) {
        // It's not safe to use the two value CombineTo variant here. e.g.
        // v1, chain2 = load chain1, loc
        // v2, chain3 = load chain2, loc
        // v3         = add v2, c
        // Now we replace use of chain2 with chain1.  This makes the second load
        // isomorphic to the one we are deleting, and thus makes this load live.
        LLVM_DEBUG(dbgs() << "\nReplacing.6 "; N->dump(&DAG);
                   dbgs() << "\nWith chain: "; Chain.dump(&DAG);
                   dbgs() << "\n");
        WorklistRemover DeadNodes(*this);
        DAG.ReplaceAllUsesOfValueWith(SDValue(N, 1), Chain);
        AddUsersToWorklist(Chain.getNode());
        if (N->use_empty())
          deleteAndRecombine(N);

        return SDValue(N, 0);   // Return N so it doesn't get rechecked!
      }
    } else {
      // Indexed loads.
      assert(N->getValueType(2) == MVT::Other && "Malformed indexed loads?");

      // If this load has an opaque TargetConstant offset, then we cannot split
      // the indexing into an add/sub directly (that TargetConstant may not be
      // valid for a different type of node, and we cannot convert an opaque
      // target constant into a regular constant).
      bool CanSplitIdx = canSplitIdx(LD);

      if (!N->hasAnyUseOfValue(0) && (CanSplitIdx || !N->hasAnyUseOfValue(1))) {
        SDValue Undef = DAG.getUNDEF(N->getValueType(0));
        SDValue Index;
        if (N->hasAnyUseOfValue(1) && CanSplitIdx) {
          Index = SplitIndexingFromLoad(LD);
          // Try to fold the base pointer arithmetic into subsequent loads and
          // stores.
          AddUsersToWorklist(N);
        } else
          Index = DAG.getUNDEF(N->getValueType(1));
        LLVM_DEBUG(dbgs() << "\nReplacing.7 "; N->dump(&DAG);
                   dbgs() << "\nWith: "; Undef.dump(&DAG);
                   dbgs() << " and 2 other values\n");
        WorklistRemover DeadNodes(*this);
        DAG.ReplaceAllUsesOfValueWith(SDValue(N, 0), Undef);
        DAG.ReplaceAllUsesOfValueWith(SDValue(N, 1), Index);
        DAG.ReplaceAllUsesOfValueWith(SDValue(N, 2), Chain);
        deleteAndRecombine(N);
        return SDValue(N, 0);   // Return N so it doesn't get rechecked!
      }
    }
  }

  // If this load is directly stored, replace the load value with the stored
  // value.
  if (auto V = ForwardStoreValueToDirectLoad(LD))
    return V;

  // Try to infer better alignment information than the load already has.
  if (OptLevel != CodeGenOptLevel::None && LD->isUnindexed() &&
      !LD->isAtomic()) {
    if (MaybeAlign Alignment = DAG.InferPtrAlign(Ptr)) {
      if (*Alignment > LD->getAlign() &&
          isAligned(*Alignment, LD->getSrcValueOffset())) {
        SDValue NewLoad = DAG.getExtLoad(
            LD->getExtensionType(), SDLoc(N), LD->getValueType(0), Chain, Ptr,
            LD->getPointerInfo(), LD->getMemoryVT(), *Alignment,
            LD->getMemOperand()->getFlags(), LD->getAAInfo());
        // NewLoad will always be N as we are only refining the alignment
        assert(NewLoad.getNode() == N);
        (void)NewLoad;
      }
    }
  }

  if (LD->isUnindexed()) {
    // Walk up chain skipping non-aliasing memory nodes.
    SDValue BetterChain = FindBetterChain(LD, Chain);

    // If there is a better chain.
    if (Chain != BetterChain) {
      SDValue ReplLoad;

      // Replace the chain to void dependency.
      if (LD->getExtensionType() == ISD::NON_EXTLOAD) {
        ReplLoad = DAG.getLoad(N->getValueType(0), SDLoc(LD),
                               BetterChain, Ptr, LD->getMemOperand());
      } else {
        ReplLoad = DAG.getExtLoad(LD->getExtensionType(), SDLoc(LD),
                                  LD->getValueType(0),
                                  BetterChain, Ptr, LD->getMemoryVT(),
                                  LD->getMemOperand());
      }

      // Create token factor to keep old chain connected.
      SDValue Token = DAG.getNode(ISD::TokenFactor, SDLoc(N),
                                  MVT::Other, Chain, ReplLoad.getValue(1));

      // Replace uses with load result and token factor
      return CombineTo(N, ReplLoad.getValue(0), Token);
    }
  }

  // Try transforming N to an indexed load.
  if (CombineToPreIndexedLoadStore(N) || CombineToPostIndexedLoadStore(N))
    return SDValue(N, 0);

  // Try to slice up N to more direct loads if the slices are mapped to
  // different register banks or pairing can take place.
  if (SliceUpLoad(N))
    return SDValue(N, 0);

  return SDValue();
}

namespace {

/// Helper structure used to slice a load in smaller loads.
/// Basically a slice is obtained from the following sequence:
/// Origin = load Ty1, Base
/// Shift = srl Ty1 Origin, CstTy Amount
/// Inst = trunc Shift to Ty2
///
/// Then, it will be rewritten into:
/// Slice = load SliceTy, Base + SliceOffset
/// [Inst = zext Slice to Ty2], only if SliceTy <> Ty2
///
/// SliceTy is deduced from the number of bits that are actually used to
/// build Inst.
struct LoadedSlice {
  /// Helper structure used to compute the cost of a slice.
  struct Cost {
    /// Are we optimizing for code size.
    bool ForCodeSize = false;

    /// Various cost.
    unsigned Loads = 0;
    unsigned Truncates = 0;
    unsigned CrossRegisterBanksCopies = 0;
    unsigned ZExts = 0;
    unsigned Shift = 0;

    explicit Cost(bool ForCodeSize) : ForCodeSize(ForCodeSize) {}

    /// Get the cost of one isolated slice.
    Cost(const LoadedSlice &LS, bool ForCodeSize)
        : ForCodeSize(ForCodeSize), Loads(1) {
      EVT TruncType = LS.Inst->getValueType(0);
      EVT LoadedType = LS.getLoadedType();
      if (TruncType != LoadedType &&
          !LS.DAG->getTargetLoweringInfo().isZExtFree(LoadedType, TruncType))
        ZExts = 1;
    }

    /// Account for slicing gain in the current cost.
    /// Slicing provide a few gains like removing a shift or a
    /// truncate. This method allows to grow the cost of the original
    /// load with the gain from this slice.
    void addSliceGain(const LoadedSlice &LS) {
      // Each slice saves a truncate.
      const TargetLowering &TLI = LS.DAG->getTargetLoweringInfo();
      if (!TLI.isTruncateFree(LS.Inst->getOperand(0), LS.Inst->getValueType(0)))
        ++Truncates;
      // If there is a shift amount, this slice gets rid of it.
      if (LS.Shift)
        ++Shift;
      // If this slice can merge a cross register bank copy, account for it.
      if (LS.canMergeExpensiveCrossRegisterBankCopy())
        ++CrossRegisterBanksCopies;
    }

    Cost &operator+=(const Cost &RHS) {
      Loads += RHS.Loads;
      Truncates += RHS.Truncates;
      CrossRegisterBanksCopies += RHS.CrossRegisterBanksCopies;
      ZExts += RHS.ZExts;
      Shift += RHS.Shift;
      return *this;
    }

    bool operator==(const Cost &RHS) const {
      return Loads == RHS.Loads && Truncates == RHS.Truncates &&
             CrossRegisterBanksCopies == RHS.CrossRegisterBanksCopies &&
             ZExts == RHS.ZExts && Shift == RHS.Shift;
    }

    bool operator!=(const Cost &RHS) const { return !(*this == RHS); }

    bool operator<(const Cost &RHS) const {
      // Assume cross register banks copies are as expensive as loads.
      // FIXME: Do we want some more target hooks?
      unsigned ExpensiveOpsLHS = Loads + CrossRegisterBanksCopies;
      unsigned ExpensiveOpsRHS = RHS.Loads + RHS.CrossRegisterBanksCopies;
      // Unless we are optimizing for code size, consider the
      // expensive operation first.
      if (!ForCodeSize && ExpensiveOpsLHS != ExpensiveOpsRHS)
        return ExpensiveOpsLHS < ExpensiveOpsRHS;
      return (Truncates + ZExts + Shift + ExpensiveOpsLHS) <
             (RHS.Truncates + RHS.ZExts + RHS.Shift + ExpensiveOpsRHS);
    }

    bool operator>(const Cost &RHS) const { return RHS < *this; }

    bool operator<=(const Cost &RHS) const { return !(RHS < *this); }

    bool operator>=(const Cost &RHS) const { return !(*this < RHS); }
  };

  // The last instruction that represent the slice. This should be a
  // truncate instruction.
  SDNode *Inst;

  // The original load instruction.
  LoadSDNode *Origin;

  // The right shift amount in bits from the original load.
  unsigned Shift;

  // The DAG from which Origin came from.
  // This is used to get some contextual information about legal types, etc.
  SelectionDAG *DAG;

  LoadedSlice(SDNode *Inst = nullptr, LoadSDNode *Origin = nullptr,
              unsigned Shift = 0, SelectionDAG *DAG = nullptr)
      : Inst(Inst), Origin(Origin), Shift(Shift), DAG(DAG) {}

  /// Get the bits used in a chunk of bits \p BitWidth large.
  /// \return Result is \p BitWidth and has used bits set to 1 and
  ///         not used bits set to 0.
  APInt getUsedBits() const {
    // Reproduce the trunc(lshr) sequence:
    // - Start from the truncated value.
    // - Zero extend to the desired bit width.
    // - Shift left.
    assert(Origin && "No original load to compare against.");
    unsigned BitWidth = Origin->getValueSizeInBits(0);
    assert(Inst && "This slice is not bound to an instruction");
    assert(Inst->getValueSizeInBits(0) <= BitWidth &&
           "Extracted slice is bigger than the whole type!");
    APInt UsedBits(Inst->getValueSizeInBits(0), 0);
    UsedBits.setAllBits();
    UsedBits = UsedBits.zext(BitWidth);
    UsedBits <<= Shift;
    return UsedBits;
  }

  /// Get the size of the slice to be loaded in bytes.
  unsigned getLoadedSize() const {
    unsigned SliceSize = getUsedBits().popcount();
    assert(!(SliceSize & 0x7) && "Size is not a multiple of a byte.");
    return SliceSize / 8;
  }

  /// Get the type that will be loaded for this slice.
  /// Note: This may not be the final type for the slice.
  EVT getLoadedType() const {
    assert(DAG && "Missing context");
    LLVMContext &Ctxt = *DAG->getContext();
    return EVT::getIntegerVT(Ctxt, getLoadedSize() * 8);
  }

  /// Get the alignment of the load used for this slice.
  Align getAlign() const {
    Align Alignment = Origin->getAlign();
    uint64_t Offset = getOffsetFromBase();
    if (Offset != 0)
      Alignment = commonAlignment(Alignment, Alignment.value() + Offset);
    return Alignment;
  }

  /// Check if this slice can be rewritten with legal operations.
  bool isLegal() const {
    // An invalid slice is not legal.
    if (!Origin || !Inst || !DAG)
      return false;

    // Offsets are for indexed load only, we do not handle that.
    if (!Origin->getOffset().isUndef())
      return false;

    const TargetLowering &TLI = DAG->getTargetLoweringInfo();

    // Check that the type is legal.
    EVT SliceType = getLoadedType();
    if (!TLI.isTypeLegal(SliceType))
      return false;

    // Check that the load is legal for this type.
    if (!TLI.isOperationLegal(ISD::LOAD, SliceType))
      return false;

    // Check that the offset can be computed.
    // 1. Check its type.
    EVT PtrType = Origin->getBasePtr().getValueType();
    if (PtrType == MVT::Untyped || PtrType.isExtended())
      return false;

    // 2. Check that it fits in the immediate.
    if (!TLI.isLegalAddImmediate(getOffsetFromBase()))
      return false;

    // 3. Check that the computation is legal.
    if (!TLI.isOperationLegal(ISD::ADD, PtrType))
      return false;

    // Check that the zext is legal if it needs one.
    EVT TruncateType = Inst->getValueType(0);
    if (TruncateType != SliceType &&
        !TLI.isOperationLegal(ISD::ZERO_EXTEND, TruncateType))
      return false;

    return true;
  }

  /// Get the offset in bytes of this slice in the original chunk of
  /// bits.
  /// \pre DAG != nullptr.
  uint64_t getOffsetFromBase() const {
    assert(DAG && "Missing context.");
    bool IsBigEndian = DAG->getDataLayout().isBigEndian();
    assert(!(Shift & 0x7) && "Shifts not aligned on Bytes are not supported.");
    uint64_t Offset = Shift / 8;
    unsigned TySizeInBytes = Origin->getValueSizeInBits(0) / 8;
    assert(!(Origin->getValueSizeInBits(0) & 0x7) &&
           "The size of the original loaded type is not a multiple of a"
           " byte.");
    // If Offset is bigger than TySizeInBytes, it means we are loading all
    // zeros. This should have been optimized before in the process.
    assert(TySizeInBytes > Offset &&
           "Invalid shift amount for given loaded size");
    if (IsBigEndian)
      Offset = TySizeInBytes - Offset - getLoadedSize();
    return Offset;
  }

  /// Generate the sequence of instructions to load the slice
  /// represented by this object and redirect the uses of this slice to
  /// this new sequence of instructions.
  /// \pre this->Inst && this->Origin are valid Instructions and this
  /// object passed the legal check: LoadedSlice::isLegal returned true.
  /// \return The last instruction of the sequence used to load the slice.
  SDValue loadSlice() const {
    assert(Inst && Origin && "Unable to replace a non-existing slice.");
    const SDValue &OldBaseAddr = Origin->getBasePtr();
    SDValue BaseAddr = OldBaseAddr;
    // Get the offset in that chunk of bytes w.r.t. the endianness.
    int64_t Offset = static_cast<int64_t>(getOffsetFromBase());
    assert(Offset >= 0 && "Offset too big to fit in int64_t!");
    if (Offset) {
      // BaseAddr = BaseAddr + Offset.
      EVT ArithType = BaseAddr.getValueType();
      SDLoc DL(Origin);
      BaseAddr = DAG->getNode(ISD::ADD, DL, ArithType, BaseAddr,
                              DAG->getConstant(Offset, DL, ArithType));
    }

    // Create the type of the loaded slice according to its size.
    EVT SliceType = getLoadedType();

    // Create the load for the slice.
    SDValue LastInst =
        DAG->getLoad(SliceType, SDLoc(Origin), Origin->getChain(), BaseAddr,
                     Origin->getPointerInfo().getWithOffset(Offset), getAlign(),
                     Origin->getMemOperand()->getFlags());
    // If the final type is not the same as the loaded type, this means that
    // we have to pad with zero. Create a zero extend for that.
    EVT FinalType = Inst->getValueType(0);
    if (SliceType != FinalType)
      LastInst =
          DAG->getNode(ISD::ZERO_EXTEND, SDLoc(LastInst), FinalType, LastInst);
    return LastInst;
  }

  /// Check if this slice can be merged with an expensive cross register
  /// bank copy. E.g.,
  /// i = load i32
  /// f = bitcast i32 i to float
  bool canMergeExpensiveCrossRegisterBankCopy() const {
    if (!Inst || !Inst->hasOneUse())
      return false;
    SDNode *Use = *Inst->use_begin();
    if (Use->getOpcode() != ISD::BITCAST)
      return false;
    assert(DAG && "Missing context");
    const TargetLowering &TLI = DAG->getTargetLoweringInfo();
    EVT ResVT = Use->getValueType(0);
    const TargetRegisterClass *ResRC =
        TLI.getRegClassFor(ResVT.getSimpleVT(), Use->isDivergent());
    const TargetRegisterClass *ArgRC =
        TLI.getRegClassFor(Use->getOperand(0).getValueType().getSimpleVT(),
                           Use->getOperand(0)->isDivergent());
    if (ArgRC == ResRC || !TLI.isOperationLegal(ISD::LOAD, ResVT))
      return false;

    // At this point, we know that we perform a cross-register-bank copy.
    // Check if it is expensive.
    const TargetRegisterInfo *TRI = DAG->getSubtarget().getRegisterInfo();
    // Assume bitcasts are cheap, unless both register classes do not
    // explicitly share a common sub class.
    if (!TRI || TRI->getCommonSubClass(ArgRC, ResRC))
      return false;

    // Check if it will be merged with the load.
    // 1. Check the alignment / fast memory access constraint.
    unsigned IsFast = 0;
    if (!TLI.allowsMemoryAccess(*DAG->getContext(), DAG->getDataLayout(), ResVT,
                                Origin->getAddressSpace(), getAlign(),
                                Origin->getMemOperand()->getFlags(), &IsFast) ||
        !IsFast)
      return false;

    // 2. Check that the load is a legal operation for that type.
    if (!TLI.isOperationLegal(ISD::LOAD, ResVT))
      return false;

    // 3. Check that we do not have a zext in the way.
    if (Inst->getValueType(0) != getLoadedType())
      return false;

    return true;
  }
};

} // end anonymous namespace

/// Check that all bits set in \p UsedBits form a dense region, i.e.,
/// \p UsedBits looks like 0..0 1..1 0..0.
static bool areUsedBitsDense(const APInt &UsedBits) {
  // If all the bits are one, this is dense!
  if (UsedBits.isAllOnes())
    return true;

  // Get rid of the unused bits on the right.
  APInt NarrowedUsedBits = UsedBits.lshr(UsedBits.countr_zero());
  // Get rid of the unused bits on the left.
  if (NarrowedUsedBits.countl_zero())
    NarrowedUsedBits = NarrowedUsedBits.trunc(NarrowedUsedBits.getActiveBits());
  // Check that the chunk of bits is completely used.
  return NarrowedUsedBits.isAllOnes();
}

/// Check whether or not \p First and \p Second are next to each other
/// in memory. This means that there is no hole between the bits loaded
/// by \p First and the bits loaded by \p Second.
static bool areSlicesNextToEachOther(const LoadedSlice &First,
                                     const LoadedSlice &Second) {
  assert(First.Origin == Second.Origin && First.Origin &&
         "Unable to match different memory origins.");
  APInt UsedBits = First.getUsedBits();
  assert((UsedBits & Second.getUsedBits()) == 0 &&
         "Slices are not supposed to overlap.");
  UsedBits |= Second.getUsedBits();
  return areUsedBitsDense(UsedBits);
}

/// Adjust the \p GlobalLSCost according to the target
/// paring capabilities and the layout of the slices.
/// \pre \p GlobalLSCost should account for at least as many loads as
/// there is in the slices in \p LoadedSlices.
static void adjustCostForPairing(SmallVectorImpl<LoadedSlice> &LoadedSlices,
                                 LoadedSlice::Cost &GlobalLSCost) {
  unsigned NumberOfSlices = LoadedSlices.size();
  // If there is less than 2 elements, no pairing is possible.
  if (NumberOfSlices < 2)
    return;

  // Sort the slices so that elements that are likely to be next to each
  // other in memory are next to each other in the list.
  llvm::sort(LoadedSlices, [](const LoadedSlice &LHS, const LoadedSlice &RHS) {
    assert(LHS.Origin == RHS.Origin && "Different bases not implemented.");
    return LHS.getOffsetFromBase() < RHS.getOffsetFromBase();
  });
  const TargetLowering &TLI = LoadedSlices[0].DAG->getTargetLoweringInfo();
  // First (resp. Second) is the first (resp. Second) potentially candidate
  // to be placed in a paired load.
  const LoadedSlice *First = nullptr;
  const LoadedSlice *Second = nullptr;
  for (unsigned CurrSlice = 0; CurrSlice < NumberOfSlices; ++CurrSlice,
                // Set the beginning of the pair.
                                                           First = Second) {
    Second = &LoadedSlices[CurrSlice];

    // If First is NULL, it means we start a new pair.
    // Get to the next slice.
    if (!First)
      continue;

    EVT LoadedType = First->getLoadedType();

    // If the types of the slices are different, we cannot pair them.
    if (LoadedType != Second->getLoadedType())
      continue;

    // Check if the target supplies paired loads for this type.
    Align RequiredAlignment;
    if (!TLI.hasPairedLoad(LoadedType, RequiredAlignment)) {
      // move to the next pair, this type is hopeless.
      Second = nullptr;
      continue;
    }
    // Check if we meet the alignment requirement.
    if (First->getAlign() < RequiredAlignment)
      continue;

    // Check that both loads are next to each other in memory.
    if (!areSlicesNextToEachOther(*First, *Second))
      continue;

    assert(GlobalLSCost.Loads > 0 && "We save more loads than we created!");
    --GlobalLSCost.Loads;
    // Move to the next pair.
    Second = nullptr;
  }
}

/// Check the profitability of all involved LoadedSlice.
/// Currently, it is considered profitable if there is exactly two
/// involved slices (1) which are (2) next to each other in memory, and
/// whose cost (\see LoadedSlice::Cost) is smaller than the original load (3).
///
/// Note: The order of the elements in \p LoadedSlices may be modified, but not
/// the elements themselves.
///
/// FIXME: When the cost model will be mature enough, we can relax
/// constraints (1) and (2).
static bool isSlicingProfitable(SmallVectorImpl<LoadedSlice> &LoadedSlices,
                                const APInt &UsedBits, bool ForCodeSize) {
  unsigned NumberOfSlices = LoadedSlices.size();
  if (StressLoadSlicing)
    return NumberOfSlices > 1;

  // Check (1).
  if (NumberOfSlices != 2)
    return false;

  // Check (2).
  if (!areUsedBitsDense(UsedBits))
    return false;

  // Check (3).
  LoadedSlice::Cost OrigCost(ForCodeSize), GlobalSlicingCost(ForCodeSize);
  // The original code has one big load.
  OrigCost.Loads = 1;
  for (unsigned CurrSlice = 0; CurrSlice < NumberOfSlices; ++CurrSlice) {
    const LoadedSlice &LS = LoadedSlices[CurrSlice];
    // Accumulate the cost of all the slices.
    LoadedSlice::Cost SliceCost(LS, ForCodeSize);
    GlobalSlicingCost += SliceCost;

    // Account as cost in the original configuration the gain obtained
    // with the current slices.
    OrigCost.addSliceGain(LS);
  }

  // If the target supports paired load, adjust the cost accordingly.
  adjustCostForPairing(LoadedSlices, GlobalSlicingCost);
  return OrigCost > GlobalSlicingCost;
}

/// If the given load, \p LI, is used only by trunc or trunc(lshr)
/// operations, split it in the various pieces being extracted.
///
/// This sort of thing is introduced by SROA.
/// This slicing takes care not to insert overlapping loads.
/// \pre LI is a simple load (i.e., not an atomic or volatile load).
bool DAGCombiner::SliceUpLoad(SDNode *N) {
  if (Level < AfterLegalizeDAG)
    return false;

  LoadSDNode *LD = cast<LoadSDNode>(N);
  if (!LD->isSimple() || !ISD::isNormalLoad(LD) ||
      !LD->getValueType(0).isInteger())
    return false;

  // The algorithm to split up a load of a scalable vector into individual
  // elements currently requires knowing the length of the loaded type,
  // so will need adjusting to work on scalable vectors.
  if (LD->getValueType(0).isScalableVector())
    return false;

  // Keep track of already used bits to detect overlapping values.
  // In that case, we will just abort the transformation.
  APInt UsedBits(LD->getValueSizeInBits(0), 0);

  SmallVector<LoadedSlice, 4> LoadedSlices;

  // Check if this load is used as several smaller chunks of bits.
  // Basically, look for uses in trunc or trunc(lshr) and record a new chain
  // of computation for each trunc.
  for (SDNode::use_iterator UI = LD->use_begin(), UIEnd = LD->use_end();
       UI != UIEnd; ++UI) {
    // Skip the uses of the chain.
    if (UI.getUse().getResNo() != 0)
      continue;

    SDNode *User = *UI;
    unsigned Shift = 0;

    // Check if this is a trunc(lshr).
    if (User->getOpcode() == ISD::SRL && User->hasOneUse() &&
        isa<ConstantSDNode>(User->getOperand(1))) {
      Shift = User->getConstantOperandVal(1);
      User = *User->use_begin();
    }

    // At this point, User is a Truncate, iff we encountered, trunc or
    // trunc(lshr).
    if (User->getOpcode() != ISD::TRUNCATE)
      return false;

    // The width of the type must be a power of 2 and greater than 8-bits.
    // Otherwise the load cannot be represented in LLVM IR.
    // Moreover, if we shifted with a non-8-bits multiple, the slice
    // will be across several bytes. We do not support that.
    unsigned Width = User->getValueSizeInBits(0);
    if (Width < 8 || !isPowerOf2_32(Width) || (Shift & 0x7))
      return false;

    // Build the slice for this chain of computations.
    LoadedSlice LS(User, LD, Shift, &DAG);
    APInt CurrentUsedBits = LS.getUsedBits();

    // Check if this slice overlaps with another.
    if ((CurrentUsedBits & UsedBits) != 0)
      return false;
    // Update the bits used globally.
    UsedBits |= CurrentUsedBits;

    // Check if the new slice would be legal.
    if (!LS.isLegal())
      return false;

    // Record the slice.
    LoadedSlices.push_back(LS);
  }

  // Abort slicing if it does not seem to be profitable.
  if (!isSlicingProfitable(LoadedSlices, UsedBits, ForCodeSize))
    return false;

  ++SlicedLoads;

  // Rewrite each chain to use an independent load.
  // By construction, each chain can be represented by a unique load.

  // Prepare the argument for the new token factor for all the slices.
  SmallVector<SDValue, 8> ArgChains;
  for (const LoadedSlice &LS : LoadedSlices) {
    SDValue SliceInst = LS.loadSlice();
    CombineTo(LS.Inst, SliceInst, true);
    if (SliceInst.getOpcode() != ISD::LOAD)
      SliceInst = SliceInst.getOperand(0);
    assert(SliceInst->getOpcode() == ISD::LOAD &&
           "It takes more than a zext to get to the loaded slice!!");
    ArgChains.push_back(SliceInst.getValue(1));
  }

  SDValue Chain = DAG.getNode(ISD::TokenFactor, SDLoc(LD), MVT::Other,
                              ArgChains);
  DAG.ReplaceAllUsesOfValueWith(SDValue(N, 1), Chain);
  AddToWorklist(Chain.getNode());
  return true;
}

/// Check to see if V is (and load (ptr), imm), where the load is having
/// specific bytes cleared out.  If so, return the byte size being masked out
/// and the shift amount.
static std::pair<unsigned, unsigned>
CheckForMaskedLoad(SDValue V, SDValue Ptr, SDValue Chain) {
  std::pair<unsigned, unsigned> Result(0, 0);

  // Check for the structure we're looking for.
  if (V->getOpcode() != ISD::AND ||
      !isa<ConstantSDNode>(V->getOperand(1)) ||
      !ISD::isNormalLoad(V->getOperand(0).getNode()))
    return Result;

  // Check the chain and pointer.
  LoadSDNode *LD = cast<LoadSDNode>(V->getOperand(0));
  if (LD->getBasePtr() != Ptr) return Result;  // Not from same pointer.

  // This only handles simple types.
  if (V.getValueType() != MVT::i16 &&
      V.getValueType() != MVT::i32 &&
      V.getValueType() != MVT::i64)
    return Result;

  // Check the constant mask.  Invert it so that the bits being masked out are
  // 0 and the bits being kept are 1.  Use getSExtValue so that leading bits
  // follow the sign bit for uniformity.
  uint64_t NotMask = ~cast<ConstantSDNode>(V->getOperand(1))->getSExtValue();
  unsigned NotMaskLZ = llvm::countl_zero(NotMask);
  if (NotMaskLZ & 7) return Result;  // Must be multiple of a byte.
  unsigned NotMaskTZ = llvm::countr_zero(NotMask);
  if (NotMaskTZ & 7) return Result;  // Must be multiple of a byte.
  if (NotMaskLZ == 64) return Result;  // All zero mask.

  // See if we have a continuous run of bits.  If so, we have 0*1+0*
  if (llvm::countr_one(NotMask >> NotMaskTZ) + NotMaskTZ + NotMaskLZ != 64)
    return Result;

  // Adjust NotMaskLZ down to be from the actual size of the int instead of i64.
  if (V.getValueType() != MVT::i64 && NotMaskLZ)
    NotMaskLZ -= 64-V.getValueSizeInBits();

  unsigned MaskedBytes = (V.getValueSizeInBits()-NotMaskLZ-NotMaskTZ)/8;
  switch (MaskedBytes) {
  case 1:
  case 2:
  case 4: break;
  default: return Result; // All one mask, or 5-byte mask.
  }

  // Verify that the first bit starts at a multiple of mask so that the access
  // is aligned the same as the access width.
  if (NotMaskTZ && NotMaskTZ/8 % MaskedBytes) return Result;

  // For narrowing to be valid, it must be the case that the load the
  // immediately preceding memory operation before the store.
  if (LD == Chain.getNode())
    ; // ok.
  else if (Chain->getOpcode() == ISD::TokenFactor &&
           SDValue(LD, 1).hasOneUse()) {
    // LD has only 1 chain use so they are no indirect dependencies.
    if (!LD->isOperandOf(Chain.getNode()))
      return Result;
  } else
    return Result; // Fail.

  Result.first = MaskedBytes;
  Result.second = NotMaskTZ/8;
  return Result;
}

/// Check to see if IVal is something that provides a value as specified by
/// MaskInfo. If so, replace the specified store with a narrower store of
/// truncated IVal.
static SDValue
ShrinkLoadReplaceStoreWithStore(const std::pair<unsigned, unsigned> &MaskInfo,
                                SDValue IVal, StoreSDNode *St,
                                DAGCombiner *DC) {
  unsigned NumBytes = MaskInfo.first;
  unsigned ByteShift = MaskInfo.second;
  SelectionDAG &DAG = DC->getDAG();

  // Check to see if IVal is all zeros in the part being masked in by the 'or'
  // that uses this.  If not, this is not a replacement.
  APInt Mask = ~APInt::getBitsSet(IVal.getValueSizeInBits(),
                                  ByteShift*8, (ByteShift+NumBytes)*8);
  if (!DAG.MaskedValueIsZero(IVal, Mask)) return SDValue();

  // Check that it is legal on the target to do this.  It is legal if the new
  // VT we're shrinking to (i8/i16/i32) is legal or we're still before type
  // legalization. If the source type is legal, but the store type isn't, see
  // if we can use a truncating store.
  MVT VT = MVT::getIntegerVT(NumBytes * 8);
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  bool UseTruncStore;
  if (DC->isTypeLegal(VT))
    UseTruncStore = false;
  else if (TLI.isTypeLegal(IVal.getValueType()) &&
           TLI.isTruncStoreLegal(IVal.getValueType(), VT))
    UseTruncStore = true;
  else
    return SDValue();

  // Can't do this for indexed stores.
  if (St->isIndexed())
    return SDValue();

  // Check that the target doesn't think this is a bad idea.
  if (St->getMemOperand() &&
      !TLI.allowsMemoryAccess(*DAG.getContext(), DAG.getDataLayout(), VT,
                              *St->getMemOperand()))
    return SDValue();

  // Okay, we can do this!  Replace the 'St' store with a store of IVal that is
  // shifted by ByteShift and truncated down to NumBytes.
  if (ByteShift) {
    SDLoc DL(IVal);
    IVal = DAG.getNode(
        ISD::SRL, DL, IVal.getValueType(), IVal,
        DAG.getShiftAmountConstant(ByteShift * 8, IVal.getValueType(), DL));
  }

  // Figure out the offset for the store and the alignment of the access.
  unsigned StOffset;
  if (DAG.getDataLayout().isLittleEndian())
    StOffset = ByteShift;
  else
    StOffset = IVal.getValueType().getStoreSize() - ByteShift - NumBytes;

  SDValue Ptr = St->getBasePtr();
  if (StOffset) {
    SDLoc DL(IVal);
    Ptr = DAG.getMemBasePlusOffset(Ptr, TypeSize::getFixed(StOffset), DL);
  }

  ++OpsNarrowed;
  if (UseTruncStore)
    return DAG.getTruncStore(St->getChain(), SDLoc(St), IVal, Ptr,
                             St->getPointerInfo().getWithOffset(StOffset),
                             VT, St->getOriginalAlign());

  // Truncate down to the new size.
  IVal = DAG.getNode(ISD::TRUNCATE, SDLoc(IVal), VT, IVal);

  return DAG
      .getStore(St->getChain(), SDLoc(St), IVal, Ptr,
                St->getPointerInfo().getWithOffset(StOffset),
                St->getOriginalAlign());
}

/// Look for sequence of load / op / store where op is one of 'or', 'xor', and
/// 'and' of immediates. If 'op' is only touching some of the loaded bits, try
/// narrowing the load and store if it would end up being a win for performance
/// or code size.
SDValue DAGCombiner::ReduceLoadOpStoreWidth(SDNode *N) {
  StoreSDNode *ST  = cast<StoreSDNode>(N);
  if (!ST->isSimple())
    return SDValue();

  SDValue Chain = ST->getChain();
  SDValue Value = ST->getValue();
  SDValue Ptr   = ST->getBasePtr();
  EVT VT = Value.getValueType();

  if (ST->isTruncatingStore() || VT.isVector())
    return SDValue();

  unsigned Opc = Value.getOpcode();

  if ((Opc != ISD::OR && Opc != ISD::XOR && Opc != ISD::AND) ||
      !Value.hasOneUse())
    return SDValue();

  // If this is "store (or X, Y), P" and X is "(and (load P), cst)", where cst
  // is a byte mask indicating a consecutive number of bytes, check to see if
  // Y is known to provide just those bytes.  If so, we try to replace the
  // load + replace + store sequence with a single (narrower) store, which makes
  // the load dead.
  if (Opc == ISD::OR && EnableShrinkLoadReplaceStoreWithStore) {
    std::pair<unsigned, unsigned> MaskedLoad;
    MaskedLoad = CheckForMaskedLoad(Value.getOperand(0), Ptr, Chain);
    if (MaskedLoad.first)
      if (SDValue NewST = ShrinkLoadReplaceStoreWithStore(MaskedLoad,
                                                  Value.getOperand(1), ST,this))
        return NewST;

    // Or is commutative, so try swapping X and Y.
    MaskedLoad = CheckForMaskedLoad(Value.getOperand(1), Ptr, Chain);
    if (MaskedLoad.first)
      if (SDValue NewST = ShrinkLoadReplaceStoreWithStore(MaskedLoad,
                                                  Value.getOperand(0), ST,this))
        return NewST;
  }

  if (!EnableReduceLoadOpStoreWidth)
    return SDValue();

  if (Value.getOperand(1).getOpcode() != ISD::Constant)
    return SDValue();

  SDValue N0 = Value.getOperand(0);
  if (ISD::isNormalLoad(N0.getNode()) && N0.hasOneUse() &&
      Chain == SDValue(N0.getNode(), 1)) {
    LoadSDNode *LD = cast<LoadSDNode>(N0);
    if (LD->getBasePtr() != Ptr ||
        LD->getPointerInfo().getAddrSpace() !=
        ST->getPointerInfo().getAddrSpace())
      return SDValue();

    // Find the type to narrow it the load / op / store to.
    SDValue N1 = Value.getOperand(1);
    unsigned BitWidth = N1.getValueSizeInBits();
    APInt Imm = N1->getAsAPIntVal();
    if (Opc == ISD::AND)
      Imm ^= APInt::getAllOnes(BitWidth);
    if (Imm == 0 || Imm.isAllOnes())
      return SDValue();
    unsigned ShAmt = Imm.countr_zero();
    unsigned MSB = BitWidth - Imm.countl_zero() - 1;
    unsigned NewBW = NextPowerOf2(MSB - ShAmt);
    EVT NewVT = EVT::getIntegerVT(*DAG.getContext(), NewBW);
    // The narrowing should be profitable, the load/store operation should be
    // legal (or custom) and the store size should be equal to the NewVT width.
    while (NewBW < BitWidth && (NewVT.getStoreSizeInBits() != NewBW ||
                                !TLI.isOperationLegalOrCustom(Opc, NewVT) ||
                                !TLI.isNarrowingProfitable(N, VT, NewVT))) {
      NewBW = NextPowerOf2(NewBW);
      NewVT = EVT::getIntegerVT(*DAG.getContext(), NewBW);
    }
    if (NewBW >= BitWidth)
      return SDValue();

    // If the lsb changed does not start at the type bitwidth boundary,
    // start at the previous one.
    if (ShAmt % NewBW)
      ShAmt = (((ShAmt + NewBW - 1) / NewBW) * NewBW) - NewBW;
    APInt Mask = APInt::getBitsSet(BitWidth, ShAmt,
                                   std::min(BitWidth, ShAmt + NewBW));
    if ((Imm & Mask) == Imm) {
      APInt NewImm = (Imm & Mask).lshr(ShAmt).trunc(NewBW);
      if (Opc == ISD::AND)
        NewImm ^= APInt::getAllOnes(NewBW);
      uint64_t PtrOff = ShAmt / 8;
      // For big endian targets, we need to adjust the offset to the pointer to
      // load the correct bytes.
      if (DAG.getDataLayout().isBigEndian())
        PtrOff = (BitWidth + 7 - NewBW) / 8 - PtrOff;

      unsigned IsFast = 0;
      Align NewAlign = commonAlignment(LD->getAlign(), PtrOff);
      if (!TLI.allowsMemoryAccess(*DAG.getContext(), DAG.getDataLayout(), NewVT,
                                  LD->getAddressSpace(), NewAlign,
                                  LD->getMemOperand()->getFlags(), &IsFast) ||
          !IsFast)
        return SDValue();

      SDValue NewPtr =
          DAG.getMemBasePlusOffset(Ptr, TypeSize::getFixed(PtrOff), SDLoc(LD));
      SDValue NewLD =
          DAG.getLoad(NewVT, SDLoc(N0), LD->getChain(), NewPtr,
                      LD->getPointerInfo().getWithOffset(PtrOff), NewAlign,
                      LD->getMemOperand()->getFlags(), LD->getAAInfo());
      SDValue NewVal = DAG.getNode(Opc, SDLoc(Value), NewVT, NewLD,
                                   DAG.getConstant(NewImm, SDLoc(Value),
                                                   NewVT));
      SDValue NewST =
          DAG.getStore(Chain, SDLoc(N), NewVal, NewPtr,
                       ST->getPointerInfo().getWithOffset(PtrOff), NewAlign);

      AddToWorklist(NewPtr.getNode());
      AddToWorklist(NewLD.getNode());
      AddToWorklist(NewVal.getNode());
      WorklistRemover DeadNodes(*this);
      DAG.ReplaceAllUsesOfValueWith(N0.getValue(1), NewLD.getValue(1));
      ++OpsNarrowed;
      return NewST;
    }
  }

  return SDValue();
}

/// For a given floating point load / store pair, if the load value isn't used
/// by any other operations, then consider transforming the pair to integer
/// load / store operations if the target deems the transformation profitable.
SDValue DAGCombiner::TransformFPLoadStorePair(SDNode *N) {
  StoreSDNode *ST  = cast<StoreSDNode>(N);
  SDValue Value = ST->getValue();
  if (ISD::isNormalStore(ST) && ISD::isNormalLoad(Value.getNode()) &&
      Value.hasOneUse()) {
    LoadSDNode *LD = cast<LoadSDNode>(Value);
    EVT VT = LD->getMemoryVT();
    if (!VT.isFloatingPoint() ||
        VT != ST->getMemoryVT() ||
        LD->isNonTemporal() ||
        ST->isNonTemporal() ||
        LD->getPointerInfo().getAddrSpace() != 0 ||
        ST->getPointerInfo().getAddrSpace() != 0)
      return SDValue();

    TypeSize VTSize = VT.getSizeInBits();

    // We don't know the size of scalable types at compile time so we cannot
    // create an integer of the equivalent size.
    if (VTSize.isScalable())
      return SDValue();

    unsigned FastLD = 0, FastST = 0;
    EVT IntVT = EVT::getIntegerVT(*DAG.getContext(), VTSize.getFixedValue());
    if (!TLI.isOperationLegal(ISD::LOAD, IntVT) ||
        !TLI.isOperationLegal(ISD::STORE, IntVT) ||
        !TLI.isDesirableToTransformToIntegerOp(ISD::LOAD, VT) ||
        !TLI.isDesirableToTransformToIntegerOp(ISD::STORE, VT) ||
        !TLI.allowsMemoryAccess(*DAG.getContext(), DAG.getDataLayout(), IntVT,
                                *LD->getMemOperand(), &FastLD) ||
        !TLI.allowsMemoryAccess(*DAG.getContext(), DAG.getDataLayout(), IntVT,
                                *ST->getMemOperand(), &FastST) ||
        !FastLD || !FastST)
      return SDValue();

    SDValue NewLD = DAG.getLoad(IntVT, SDLoc(Value), LD->getChain(),
                                LD->getBasePtr(), LD->getMemOperand());

    SDValue NewST = DAG.getStore(ST->getChain(), SDLoc(N), NewLD,
                                 ST->getBasePtr(), ST->getMemOperand());

    AddToWorklist(NewLD.getNode());
    AddToWorklist(NewST.getNode());
    WorklistRemover DeadNodes(*this);
    DAG.ReplaceAllUsesOfValueWith(Value.getValue(1), NewLD.getValue(1));
    ++LdStFP2Int;
    return NewST;
  }

  return SDValue();
}

// This is a helper function for visitMUL to check the profitability
// of folding (mul (add x, c1), c2) -> (add (mul x, c2), c1*c2).
// MulNode is the original multiply, AddNode is (add x, c1),
// and ConstNode is c2.
//
// If the (add x, c1) has multiple uses, we could increase
// the number of adds if we make this transformation.
// It would only be worth doing this if we can remove a
// multiply in the process. Check for that here.
// To illustrate:
//     (A + c1) * c3
//     (A + c2) * c3
// We're checking for cases where we have common "c3 * A" expressions.
bool DAGCombiner::isMulAddWithConstProfitable(SDNode *MulNode, SDValue AddNode,
                                              SDValue ConstNode) {
  APInt Val;

  // If the add only has one use, and the target thinks the folding is
  // profitable or does not lead to worse code, this would be OK to do.
  if (AddNode->hasOneUse() &&
      TLI.isMulAddWithConstProfitable(AddNode, ConstNode))
    return true;

  // Walk all the users of the constant with which we're multiplying.
  for (SDNode *Use : ConstNode->uses()) {
    if (Use == MulNode) // This use is the one we're on right now. Skip it.
      continue;

    if (Use->getOpcode() == ISD::MUL) { // We have another multiply use.
      SDNode *OtherOp;
      SDNode *MulVar = AddNode.getOperand(0).getNode();

      // OtherOp is what we're multiplying against the constant.
      if (Use->getOperand(0) == ConstNode)
        OtherOp = Use->getOperand(1).getNode();
      else
        OtherOp = Use->getOperand(0).getNode();

      // Check to see if multiply is with the same operand of our "add".
      //
      //     ConstNode  = CONST
      //     Use = ConstNode * A  <-- visiting Use. OtherOp is A.
      //     ...
      //     AddNode  = (A + c1)  <-- MulVar is A.
      //         = AddNode * ConstNode   <-- current visiting instruction.
      //
      // If we make this transformation, we will have a common
      // multiply (ConstNode * A) that we can save.
      if (OtherOp == MulVar)
        return true;

      // Now check to see if a future expansion will give us a common
      // multiply.
      //
      //     ConstNode  = CONST
      //     AddNode    = (A + c1)
      //     ...   = AddNode * ConstNode <-- current visiting instruction.
      //     ...
      //     OtherOp = (A + c2)
      //     Use     = OtherOp * ConstNode <-- visiting Use.
      //
      // If we make this transformation, we will have a common
      // multiply (CONST * A) after we also do the same transformation
      // to the "t2" instruction.
      if (OtherOp->getOpcode() == ISD::ADD &&
          DAG.isConstantIntBuildVectorOrConstantInt(OtherOp->getOperand(1)) &&
          OtherOp->getOperand(0).getNode() == MulVar)
        return true;
    }
  }

  // Didn't find a case where this would be profitable.
  return false;
}

SDValue DAGCombiner::getMergeStoreChains(SmallVectorImpl<MemOpLink> &StoreNodes,
                                         unsigned NumStores) {
  SmallVector<SDValue, 8> Chains;
  SmallPtrSet<const SDNode *, 8> Visited;
  SDLoc StoreDL(StoreNodes[0].MemNode);

  for (unsigned i = 0; i < NumStores; ++i) {
    Visited.insert(StoreNodes[i].MemNode);
  }

  // don't include nodes that are children or repeated nodes.
  for (unsigned i = 0; i < NumStores; ++i) {
    if (Visited.insert(StoreNodes[i].MemNode->getChain().getNode()).second)
      Chains.push_back(StoreNodes[i].MemNode->getChain());
  }

  assert(!Chains.empty() && "Chain should have generated a chain");
  return DAG.getTokenFactor(StoreDL, Chains);
}

bool DAGCombiner::hasSameUnderlyingObj(ArrayRef<MemOpLink> StoreNodes) {
  const Value *UnderlyingObj = nullptr;
  for (const auto &MemOp : StoreNodes) {
    const MachineMemOperand *MMO = MemOp.MemNode->getMemOperand();
    // Pseudo value like stack frame has its own frame index and size, should
    // not use the first store's frame index for other frames.
    if (MMO->getPseudoValue())
      return false;

    if (!MMO->getValue())
      return false;

    const Value *Obj = getUnderlyingObject(MMO->getValue());

    if (UnderlyingObj && UnderlyingObj != Obj)
      return false;

    if (!UnderlyingObj)
      UnderlyingObj = Obj;
  }

  return true;
}

bool DAGCombiner::mergeStoresOfConstantsOrVecElts(
    SmallVectorImpl<MemOpLink> &StoreNodes, EVT MemVT, unsigned NumStores,
    bool IsConstantSrc, bool UseVector, bool UseTrunc) {
  // Make sure we have something to merge.
  if (NumStores < 2)
    return false;

  assert((!UseTrunc || !UseVector) &&
         "This optimization cannot emit a vector truncating store");

  // The latest Node in the DAG.
  SDLoc DL(StoreNodes[0].MemNode);

  TypeSize ElementSizeBits = MemVT.getStoreSizeInBits();
  unsigned SizeInBits = NumStores * ElementSizeBits;
  unsigned NumMemElts = MemVT.isVector() ? MemVT.getVectorNumElements() : 1;

  std::optional<MachineMemOperand::Flags> Flags;
  AAMDNodes AAInfo;
  for (unsigned I = 0; I != NumStores; ++I) {
    StoreSDNode *St = cast<StoreSDNode>(StoreNodes[I].MemNode);
    if (!Flags) {
      Flags = St->getMemOperand()->getFlags();
      AAInfo = St->getAAInfo();
      continue;
    }
    // Skip merging if there's an inconsistent flag.
    if (Flags != St->getMemOperand()->getFlags())
      return false;
    // Concatenate AA metadata.
    AAInfo = AAInfo.concat(St->getAAInfo());
  }

  EVT StoreTy;
  if (UseVector) {
    unsigned Elts = NumStores * NumMemElts;
    // Get the type for the merged vector store.
    StoreTy = EVT::getVectorVT(*DAG.getContext(), MemVT.getScalarType(), Elts);
  } else
    StoreTy = EVT::getIntegerVT(*DAG.getContext(), SizeInBits);

  SDValue StoredVal;
  if (UseVector) {
    if (IsConstantSrc) {
      SmallVector<SDValue, 8> BuildVector;
      for (unsigned I = 0; I != NumStores; ++I) {
        StoreSDNode *St = cast<StoreSDNode>(StoreNodes[I].MemNode);
        SDValue Val = St->getValue();
        // If constant is of the wrong type, convert it now.  This comes up
        // when one of our stores was truncating.
        if (MemVT != Val.getValueType()) {
          Val = peekThroughBitcasts(Val);
          // Deal with constants of wrong size.
          if (ElementSizeBits != Val.getValueSizeInBits()) {
            auto *C = dyn_cast<ConstantSDNode>(Val);
            if (!C)
              // Not clear how to truncate FP values.
              // TODO: Handle truncation of build_vector constants
              return false;

            EVT IntMemVT =
                EVT::getIntegerVT(*DAG.getContext(), MemVT.getSizeInBits());
            Val = DAG.getConstant(C->getAPIntValue()
                                      .zextOrTrunc(Val.getValueSizeInBits())
                                      .zextOrTrunc(ElementSizeBits),
                                  SDLoc(C), IntMemVT);
          }
          // Make sure correctly size type is the correct type.
          Val = DAG.getBitcast(MemVT, Val);
        }
        BuildVector.push_back(Val);
      }
      StoredVal = DAG.getNode(MemVT.isVector() ? ISD::CONCAT_VECTORS
                                               : ISD::BUILD_VECTOR,
                              DL, StoreTy, BuildVector);
    } else {
      SmallVector<SDValue, 8> Ops;
      for (unsigned i = 0; i < NumStores; ++i) {
        StoreSDNode *St = cast<StoreSDNode>(StoreNodes[i].MemNode);
        SDValue Val = peekThroughBitcasts(St->getValue());
        // All operands of BUILD_VECTOR / CONCAT_VECTOR must be of
        // type MemVT. If the underlying value is not the correct
        // type, but it is an extraction of an appropriate vector we
        // can recast Val to be of the correct type. This may require
        // converting between EXTRACT_VECTOR_ELT and
        // EXTRACT_SUBVECTOR.
        if ((MemVT != Val.getValueType()) &&
            (Val.getOpcode() == ISD::EXTRACT_VECTOR_ELT ||
             Val.getOpcode() == ISD::EXTRACT_SUBVECTOR)) {
          EVT MemVTScalarTy = MemVT.getScalarType();
          // We may need to add a bitcast here to get types to line up.
          if (MemVTScalarTy != Val.getValueType().getScalarType()) {
            Val = DAG.getBitcast(MemVT, Val);
          } else if (MemVT.isVector() &&
                     Val.getOpcode() == ISD::EXTRACT_VECTOR_ELT) {
            Val = DAG.getNode(ISD::BUILD_VECTOR, DL, MemVT, Val);
          } else {
            unsigned OpC = MemVT.isVector() ? ISD::EXTRACT_SUBVECTOR
                                            : ISD::EXTRACT_VECTOR_ELT;
            SDValue Vec = Val.getOperand(0);
            SDValue Idx = Val.getOperand(1);
            Val = DAG.getNode(OpC, SDLoc(Val), MemVT, Vec, Idx);
          }
        }
        Ops.push_back(Val);
      }

      // Build the extracted vector elements back into a vector.
      StoredVal = DAG.getNode(MemVT.isVector() ? ISD::CONCAT_VECTORS
                                               : ISD::BUILD_VECTOR,
                              DL, StoreTy, Ops);
    }
  } else {
    // We should always use a vector store when merging extracted vector
    // elements, so this path implies a store of constants.
    assert(IsConstantSrc && "Merged vector elements should use vector store");

    APInt StoreInt(SizeInBits, 0);

    // Construct a single integer constant which is made of the smaller
    // constant inputs.
    bool IsLE = DAG.getDataLayout().isLittleEndian();
    for (unsigned i = 0; i < NumStores; ++i) {
      unsigned Idx = IsLE ? (NumStores - 1 - i) : i;
      StoreSDNode *St  = cast<StoreSDNode>(StoreNodes[Idx].MemNode);

      SDValue Val = St->getValue();
      Val = peekThroughBitcasts(Val);
      StoreInt <<= ElementSizeBits;
      if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Val)) {
        StoreInt |= C->getAPIntValue()
                        .zextOrTrunc(ElementSizeBits)
                        .zextOrTrunc(SizeInBits);
      } else if (ConstantFPSDNode *C = dyn_cast<ConstantFPSDNode>(Val)) {
        StoreInt |= C->getValueAPF()
                        .bitcastToAPInt()
                        .zextOrTrunc(ElementSizeBits)
                        .zextOrTrunc(SizeInBits);
        // If fp truncation is necessary give up for now.
        if (MemVT.getSizeInBits() != ElementSizeBits)
          return false;
      } else if (ISD::isBuildVectorOfConstantSDNodes(Val.getNode()) ||
                 ISD::isBuildVectorOfConstantFPSDNodes(Val.getNode())) {
        // Not yet handled
        return false;
      } else {
        llvm_unreachable("Invalid constant element type");
      }
    }

    // Create the new Load and Store operations.
    StoredVal = DAG.getConstant(StoreInt, DL, StoreTy);
  }

  LSBaseSDNode *FirstInChain = StoreNodes[0].MemNode;
  SDValue NewChain = getMergeStoreChains(StoreNodes, NumStores);
  bool CanReusePtrInfo = hasSameUnderlyingObj(StoreNodes);

  // make sure we use trunc store if it's necessary to be legal.
  // When generate the new widen store, if the first store's pointer info can
  // not be reused, discard the pointer info except the address space because
  // now the widen store can not be represented by the original pointer info
  // which is for the narrow memory object.
  SDValue NewStore;
  if (!UseTrunc) {
    NewStore = DAG.getStore(
        NewChain, DL, StoredVal, FirstInChain->getBasePtr(),
        CanReusePtrInfo
            ? FirstInChain->getPointerInfo()
            : MachinePointerInfo(FirstInChain->getPointerInfo().getAddrSpace()),
        FirstInChain->getAlign(), *Flags, AAInfo);
  } else { // Must be realized as a trunc store
    EVT LegalizedStoredValTy =
        TLI.getTypeToTransformTo(*DAG.getContext(), StoredVal.getValueType());
    unsigned LegalizedStoreSize = LegalizedStoredValTy.getSizeInBits();
    ConstantSDNode *C = cast<ConstantSDNode>(StoredVal);
    SDValue ExtendedStoreVal =
        DAG.getConstant(C->getAPIntValue().zextOrTrunc(LegalizedStoreSize), DL,
                        LegalizedStoredValTy);
    NewStore = DAG.getTruncStore(
        NewChain, DL, ExtendedStoreVal, FirstInChain->getBasePtr(),
        CanReusePtrInfo
            ? FirstInChain->getPointerInfo()
            : MachinePointerInfo(FirstInChain->getPointerInfo().getAddrSpace()),
        StoredVal.getValueType() /*TVT*/, FirstInChain->getAlign(), *Flags,
        AAInfo);
  }

  // Replace all merged stores with the new store.
  for (unsigned i = 0; i < NumStores; ++i)
    CombineTo(StoreNodes[i].MemNode, NewStore);

  AddToWorklist(NewChain.getNode());
  return true;
}

SDNode *
DAGCombiner::getStoreMergeCandidates(StoreSDNode *St,
                                     SmallVectorImpl<MemOpLink> &StoreNodes) {
  // This holds the base pointer, index, and the offset in bytes from the base
  // pointer. We must have a base and an offset. Do not handle stores to undef
  // base pointers.
  BaseIndexOffset BasePtr = BaseIndexOffset::match(St, DAG);
  if (!BasePtr.getBase().getNode() || BasePtr.getBase().isUndef())
    return nullptr;

  SDValue Val = peekThroughBitcasts(St->getValue());
  StoreSource StoreSrc = getStoreSource(Val);
  assert(StoreSrc != StoreSource::Unknown && "Expected known source for store");

  // Match on loadbaseptr if relevant.
  EVT MemVT = St->getMemoryVT();
  BaseIndexOffset LBasePtr;
  EVT LoadVT;
  if (StoreSrc == StoreSource::Load) {
    auto *Ld = cast<LoadSDNode>(Val);
    LBasePtr = BaseIndexOffset::match(Ld, DAG);
    LoadVT = Ld->getMemoryVT();
    // Load and store should be the same type.
    if (MemVT != LoadVT)
      return nullptr;
    // Loads must only have one use.
    if (!Ld->hasNUsesOfValue(1, 0))
      return nullptr;
    // The memory operands must not be volatile/indexed/atomic.
    // TODO: May be able to relax for unordered atomics (see D66309)
    if (!Ld->isSimple() || Ld->isIndexed())
      return nullptr;
  }
  auto CandidateMatch = [&](StoreSDNode *Other, BaseIndexOffset &Ptr,
                            int64_t &Offset) -> bool {
    // The memory operands must not be volatile/indexed/atomic.
    // TODO: May be able to relax for unordered atomics (see D66309)
    if (!Other->isSimple() || Other->isIndexed())
      return false;
    // Don't mix temporal stores with non-temporal stores.
    if (St->isNonTemporal() != Other->isNonTemporal())
      return false;
    if (!TLI.areTwoSDNodeTargetMMOFlagsMergeable(*St, *Other))
      return false;
    SDValue OtherBC = peekThroughBitcasts(Other->getValue());
    // Allow merging constants of different types as integers.
    bool NoTypeMatch = (MemVT.isInteger()) ? !MemVT.bitsEq(Other->getMemoryVT())
                                           : Other->getMemoryVT() != MemVT;
    switch (StoreSrc) {
    case StoreSource::Load: {
      if (NoTypeMatch)
        return false;
      // The Load's Base Ptr must also match.
      auto *OtherLd = dyn_cast<LoadSDNode>(OtherBC);
      if (!OtherLd)
        return false;
      BaseIndexOffset LPtr = BaseIndexOffset::match(OtherLd, DAG);
      if (LoadVT != OtherLd->getMemoryVT())
        return false;
      // Loads must only have one use.
      if (!OtherLd->hasNUsesOfValue(1, 0))
        return false;
      // The memory operands must not be volatile/indexed/atomic.
      // TODO: May be able to relax for unordered atomics (see D66309)
      if (!OtherLd->isSimple() || OtherLd->isIndexed())
        return false;
      // Don't mix temporal loads with non-temporal loads.
      if (cast<LoadSDNode>(Val)->isNonTemporal() != OtherLd->isNonTemporal())
        return false;
      if (!TLI.areTwoSDNodeTargetMMOFlagsMergeable(*cast<LoadSDNode>(Val),
                                                   *OtherLd))
        return false;
      if (!(LBasePtr.equalBaseIndex(LPtr, DAG)))
        return false;
      break;
    }
    case StoreSource::Constant:
      if (NoTypeMatch)
        return false;
      if (getStoreSource(OtherBC) != StoreSource::Constant)
        return false;
      break;
    case StoreSource::Extract:
      // Do not merge truncated stores here.
      if (Other->isTruncatingStore())
        return false;
      if (!MemVT.bitsEq(OtherBC.getValueType()))
        return false;
      if (OtherBC.getOpcode() != ISD::EXTRACT_VECTOR_ELT &&
          OtherBC.getOpcode() != ISD::EXTRACT_SUBVECTOR)
        return false;
      break;
    default:
      llvm_unreachable("Unhandled store source for merging");
    }
    Ptr = BaseIndexOffset::match(Other, DAG);
    return (BasePtr.equalBaseIndex(Ptr, DAG, Offset));
  };

  // We are looking for a root node which is an ancestor to all mergable
  // stores. We search up through a load, to our root and then down
  // through all children. For instance we will find Store{1,2,3} if
  // St is Store1, Store2. or Store3 where the root is not a load
  // which always true for nonvolatile ops. TODO: Expand
  // the search to find all valid candidates through multiple layers of loads.
  //
  // Root
  // |-------|-------|
  // Load    Load    Store3
  // |       |
  // Store1   Store2
  //
  // FIXME: We should be able to climb and
  // descend TokenFactors to find candidates as well.

  SDNode *RootNode = St->getChain().getNode();
  // Bail out if we already analyzed this root node and found nothing.
  if (ChainsWithoutMergeableStores.contains(RootNode))
    return nullptr;

  // Check if the pair of StoreNode and the RootNode already bail out many
  // times which is over the limit in dependence check.
  auto OverLimitInDependenceCheck = [&](SDNode *StoreNode,
                                        SDNode *RootNode) -> bool {
    auto RootCount = StoreRootCountMap.find(StoreNode);
    return RootCount != StoreRootCountMap.end() &&
           RootCount->second.first == RootNode &&
           RootCount->second.second > StoreMergeDependenceLimit;
  };

  auto TryToAddCandidate = [&](SDNode::use_iterator UseIter) {
    // This must be a chain use.
    if (UseIter.getOperandNo() != 0)
      return;
    if (auto *OtherStore = dyn_cast<StoreSDNode>(*UseIter)) {
      BaseIndexOffset Ptr;
      int64_t PtrDiff;
      if (CandidateMatch(OtherStore, Ptr, PtrDiff) &&
          !OverLimitInDependenceCheck(OtherStore, RootNode))
        StoreNodes.push_back(MemOpLink(OtherStore, PtrDiff));
    }
  };

  unsigned NumNodesExplored = 0;
  const unsigned MaxSearchNodes = 1024;
  if (auto *Ldn = dyn_cast<LoadSDNode>(RootNode)) {
    RootNode = Ldn->getChain().getNode();
    // Bail out if we already analyzed this root node and found nothing.
    if (ChainsWithoutMergeableStores.contains(RootNode))
      return nullptr;
    for (auto I = RootNode->use_begin(), E = RootNode->use_end();
         I != E && NumNodesExplored < MaxSearchNodes; ++I, ++NumNodesExplored) {
      if (I.getOperandNo() == 0 && isa<LoadSDNode>(*I)) { // walk down chain
        for (auto I2 = (*I)->use_begin(), E2 = (*I)->use_end(); I2 != E2; ++I2)
          TryToAddCandidate(I2);
      }
      // Check stores that depend on the root (e.g. Store 3 in the chart above).
      if (I.getOperandNo() == 0 && isa<StoreSDNode>(*I)) {
        TryToAddCandidate(I);
      }
    }
  } else {
    for (auto I = RootNode->use_begin(), E = RootNode->use_end();
         I != E && NumNodesExplored < MaxSearchNodes; ++I, ++NumNodesExplored)
      TryToAddCandidate(I);
  }

  return RootNode;
}

// We need to check that merging these stores does not cause a loop in the
// DAG. Any store candidate may depend on another candidate indirectly through
// its operands. Check in parallel by searching up from operands of candidates.
bool DAGCombiner::checkMergeStoreCandidatesForDependencies(
    SmallVectorImpl<MemOpLink> &StoreNodes, unsigned NumStores,
    SDNode *RootNode) {
  // FIXME: We should be able to truncate a full search of
  // predecessors by doing a BFS and keeping tabs the originating
  // stores from which worklist nodes come from in a similar way to
  // TokenFactor simplfication.

  SmallPtrSet<const SDNode *, 32> Visited;
  SmallVector<const SDNode *, 8> Worklist;

  // RootNode is a predecessor to all candidates so we need not search
  // past it. Add RootNode (peeking through TokenFactors). Do not count
  // these towards size check.

  Worklist.push_back(RootNode);
  while (!Worklist.empty()) {
    auto N = Worklist.pop_back_val();
    if (!Visited.insert(N).second)
      continue; // Already present in Visited.
    if (N->getOpcode() == ISD::TokenFactor) {
      for (SDValue Op : N->ops())
        Worklist.push_back(Op.getNode());
    }
  }

  // Don't count pruning nodes towards max.
  unsigned int Max = 1024 + Visited.size();
  // Search Ops of store candidates.
  for (unsigned i = 0; i < NumStores; ++i) {
    SDNode *N = StoreNodes[i].MemNode;
    // Of the 4 Store Operands:
    //   * Chain (Op 0) -> We have already considered these
    //                     in candidate selection, but only by following the
    //                     chain dependencies. We could still have a chain
    //                     dependency to a load, that has a non-chain dep to
    //                     another load, that depends on a store, etc. So it is
    //                     possible to have dependencies that consist of a mix
    //                     of chain and non-chain deps, and we need to include
    //                     chain operands in the analysis here..
    //   * Value (Op 1) -> Cycles may happen (e.g. through load chains)
    //   * Address (Op 2) -> Merged addresses may only vary by a fixed constant,
    //                       but aren't necessarily fromt the same base node, so
    //                       cycles possible (e.g. via indexed store).
    //   * (Op 3) -> Represents the pre or post-indexing offset (or undef for
    //               non-indexed stores). Not constant on all targets (e.g. ARM)
    //               and so can participate in a cycle.
    for (const SDValue &Op : N->op_values())
      Worklist.push_back(Op.getNode());
  }
  // Search through DAG. We can stop early if we find a store node.
  for (unsigned i = 0; i < NumStores; ++i)
    if (SDNode::hasPredecessorHelper(StoreNodes[i].MemNode, Visited, Worklist,
                                     Max)) {
      // If the searching bail out, record the StoreNode and RootNode in the
      // StoreRootCountMap. If we have seen the pair many times over a limit,
      // we won't add the StoreNode into StoreNodes set again.
      if (Visited.size() >= Max) {
        auto &RootCount = StoreRootCountMap[StoreNodes[i].MemNode];
        if (RootCount.first == RootNode)
          RootCount.second++;
        else
          RootCount = {RootNode, 1};
      }
      return false;
    }
  return true;
}

unsigned
DAGCombiner::getConsecutiveStores(SmallVectorImpl<MemOpLink> &StoreNodes,
                                  int64_t ElementSizeBytes) const {
  while (true) {
    // Find a store past the width of the first store.
    size_t StartIdx = 0;
    while ((StartIdx + 1 < StoreNodes.size()) &&
           StoreNodes[StartIdx].OffsetFromBase + ElementSizeBytes !=
              StoreNodes[StartIdx + 1].OffsetFromBase)
      ++StartIdx;

    // Bail if we don't have enough candidates to merge.
    if (StartIdx + 1 >= StoreNodes.size())
      return 0;

    // Trim stores that overlapped with the first store.
    if (StartIdx)
      StoreNodes.erase(StoreNodes.begin(), StoreNodes.begin() + StartIdx);

    // Scan the memory operations on the chain and find the first
    // non-consecutive store memory address.
    unsigned NumConsecutiveStores = 1;
    int64_t StartAddress = StoreNodes[0].OffsetFromBase;
    // Check that the addresses are consecutive starting from the second
    // element in the list of stores.
    for (unsigned i = 1, e = StoreNodes.size(); i < e; ++i) {
      int64_t CurrAddress = StoreNodes[i].OffsetFromBase;
      if (CurrAddress - StartAddress != (ElementSizeBytes * i))
        break;
      NumConsecutiveStores = i + 1;
    }
    if (NumConsecutiveStores > 1)
      return NumConsecutiveStores;

    // There are no consecutive stores at the start of the list.
    // Remove the first store and try again.
    StoreNodes.erase(StoreNodes.begin(), StoreNodes.begin() + 1);
  }
}

bool DAGCombiner::tryStoreMergeOfConstants(
    SmallVectorImpl<MemOpLink> &StoreNodes, unsigned NumConsecutiveStores,
    EVT MemVT, SDNode *RootNode, bool AllowVectors) {
  LLVMContext &Context = *DAG.getContext();
  const DataLayout &DL = DAG.getDataLayout();
  int64_t ElementSizeBytes = MemVT.getStoreSize();
  unsigned NumMemElts = MemVT.isVector() ? MemVT.getVectorNumElements() : 1;
  bool MadeChange = false;

  // Store the constants into memory as one consecutive store.
  while (NumConsecutiveStores >= 2) {
    LSBaseSDNode *FirstInChain = StoreNodes[0].MemNode;
    unsigned FirstStoreAS = FirstInChain->getAddressSpace();
    Align FirstStoreAlign = FirstInChain->getAlign();
    unsigned LastLegalType = 1;
    unsigned LastLegalVectorType = 1;
    bool LastIntegerTrunc = false;
    bool NonZero = false;
    unsigned FirstZeroAfterNonZero = NumConsecutiveStores;
    for (unsigned i = 0; i < NumConsecutiveStores; ++i) {
      StoreSDNode *ST = cast<StoreSDNode>(StoreNodes[i].MemNode);
      SDValue StoredVal = ST->getValue();
      bool IsElementZero = false;
      if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(StoredVal))
        IsElementZero = C->isZero();
      else if (ConstantFPSDNode *C = dyn_cast<ConstantFPSDNode>(StoredVal))
        IsElementZero = C->getConstantFPValue()->isNullValue();
      else if (ISD::isBuildVectorAllZeros(StoredVal.getNode()))
        IsElementZero = true;
      if (IsElementZero) {
        if (NonZero && FirstZeroAfterNonZero == NumConsecutiveStores)
          FirstZeroAfterNonZero = i;
      }
      NonZero |= !IsElementZero;

      // Find a legal type for the constant store.
      unsigned SizeInBits = (i + 1) * ElementSizeBytes * 8;
      EVT StoreTy = EVT::getIntegerVT(Context, SizeInBits);
      unsigned IsFast = 0;

      // Break early when size is too large to be legal.
      if (StoreTy.getSizeInBits() > MaximumLegalStoreInBits)
        break;

      if (TLI.isTypeLegal(StoreTy) &&
          TLI.canMergeStoresTo(FirstStoreAS, StoreTy,
                               DAG.getMachineFunction()) &&
          TLI.allowsMemoryAccess(Context, DL, StoreTy,
                                 *FirstInChain->getMemOperand(), &IsFast) &&
          IsFast) {
        LastIntegerTrunc = false;
        LastLegalType = i + 1;
        // Or check whether a truncstore is legal.
      } else if (TLI.getTypeAction(Context, StoreTy) ==
                 TargetLowering::TypePromoteInteger) {
        EVT LegalizedStoredValTy =
            TLI.getTypeToTransformTo(Context, StoredVal.getValueType());
        if (TLI.isTruncStoreLegal(LegalizedStoredValTy, StoreTy) &&
            TLI.canMergeStoresTo(FirstStoreAS, LegalizedStoredValTy,
                                 DAG.getMachineFunction()) &&
            TLI.allowsMemoryAccess(Context, DL, StoreTy,
                                   *FirstInChain->getMemOperand(), &IsFast) &&
            IsFast) {
          LastIntegerTrunc = true;
          LastLegalType = i + 1;
        }
      }

      // We only use vectors if the target allows it and the function is not
      // marked with the noimplicitfloat attribute.
      if (TLI.storeOfVectorConstantIsCheap(!NonZero, MemVT, i + 1, FirstStoreAS) &&
          AllowVectors) {
        // Find a legal type for the vector store.
        unsigned Elts = (i + 1) * NumMemElts;
        EVT Ty = EVT::getVectorVT(Context, MemVT.getScalarType(), Elts);
        if (TLI.isTypeLegal(Ty) && TLI.isTypeLegal(MemVT) &&
            TLI.canMergeStoresTo(FirstStoreAS, Ty, DAG.getMachineFunction()) &&
            TLI.allowsMemoryAccess(Context, DL, Ty,
                                   *FirstInChain->getMemOperand(), &IsFast) &&
            IsFast)
          LastLegalVectorType = i + 1;
      }
    }

    bool UseVector = (LastLegalVectorType > LastLegalType) && AllowVectors;
    unsigned NumElem = (UseVector) ? LastLegalVectorType : LastLegalType;
    bool UseTrunc = LastIntegerTrunc && !UseVector;

    // Check if we found a legal integer type that creates a meaningful
    // merge.
    if (NumElem < 2) {
      // We know that candidate stores are in order and of correct
      // shape. While there is no mergeable sequence from the
      // beginning one may start later in the sequence. The only
      // reason a merge of size N could have failed where another of
      // the same size would not have, is if the alignment has
      // improved or we've dropped a non-zero value. Drop as many
      // candidates as we can here.
      unsigned NumSkip = 1;
      while ((NumSkip < NumConsecutiveStores) &&
             (NumSkip < FirstZeroAfterNonZero) &&
             (StoreNodes[NumSkip].MemNode->getAlign() <= FirstStoreAlign))
        NumSkip++;

      StoreNodes.erase(StoreNodes.begin(), StoreNodes.begin() + NumSkip);
      NumConsecutiveStores -= NumSkip;
      continue;
    }

    // Check that we can merge these candidates without causing a cycle.
    if (!checkMergeStoreCandidatesForDependencies(StoreNodes, NumElem,
                                                  RootNode)) {
      StoreNodes.erase(StoreNodes.begin(), StoreNodes.begin() + NumElem);
      NumConsecutiveStores -= NumElem;
      continue;
    }

    MadeChange |= mergeStoresOfConstantsOrVecElts(StoreNodes, MemVT, NumElem,
                                                  /*IsConstantSrc*/ true,
                                                  UseVector, UseTrunc);

    // Remove merged stores for next iteration.
    StoreNodes.erase(StoreNodes.begin(), StoreNodes.begin() + NumElem);
    NumConsecutiveStores -= NumElem;
  }
  return MadeChange;
}

bool DAGCombiner::tryStoreMergeOfExtracts(
    SmallVectorImpl<MemOpLink> &StoreNodes, unsigned NumConsecutiveStores,
    EVT MemVT, SDNode *RootNode) {
  LLVMContext &Context = *DAG.getContext();
  const DataLayout &DL = DAG.getDataLayout();
  unsigned NumMemElts = MemVT.isVector() ? MemVT.getVectorNumElements() : 1;
  bool MadeChange = false;

  // Loop on Consecutive Stores on success.
  while (NumConsecutiveStores >= 2) {
    LSBaseSDNode *FirstInChain = StoreNodes[0].MemNode;
    unsigned FirstStoreAS = FirstInChain->getAddressSpace();
    Align FirstStoreAlign = FirstInChain->getAlign();
    unsigned NumStoresToMerge = 1;
    for (unsigned i = 0; i < NumConsecutiveStores; ++i) {
      // Find a legal type for the vector store.
      unsigned Elts = (i + 1) * NumMemElts;
      EVT Ty = EVT::getVectorVT(*DAG.getContext(), MemVT.getScalarType(), Elts);
      unsigned IsFast = 0;

      // Break early when size is too large to be legal.
      if (Ty.getSizeInBits() > MaximumLegalStoreInBits)
        break;

      if (TLI.isTypeLegal(Ty) &&
          TLI.canMergeStoresTo(FirstStoreAS, Ty, DAG.getMachineFunction()) &&
          TLI.allowsMemoryAccess(Context, DL, Ty,
                                 *FirstInChain->getMemOperand(), &IsFast) &&
          IsFast)
        NumStoresToMerge = i + 1;
    }

    // Check if we found a legal integer type creating a meaningful
    // merge.
    if (NumStoresToMerge < 2) {
      // We know that candidate stores are in order and of correct
      // shape. While there is no mergeable sequence from the
      // beginning one may start later in the sequence. The only
      // reason a merge of size N could have failed where another of
      // the same size would not have, is if the alignment has
      // improved. Drop as many candidates as we can here.
      unsigned NumSkip = 1;
      while ((NumSkip < NumConsecutiveStores) &&
             (StoreNodes[NumSkip].MemNode->getAlign() <= FirstStoreAlign))
        NumSkip++;

      StoreNodes.erase(StoreNodes.begin(), StoreNodes.begin() + NumSkip);
      NumConsecutiveStores -= NumSkip;
      continue;
    }

    // Check that we can merge these candidates without causing a cycle.
    if (!checkMergeStoreCandidatesForDependencies(StoreNodes, NumStoresToMerge,
                                                  RootNode)) {
      StoreNodes.erase(StoreNodes.begin(),
                       StoreNodes.begin() + NumStoresToMerge);
      NumConsecutiveStores -= NumStoresToMerge;
      continue;
    }

    MadeChange |= mergeStoresOfConstantsOrVecElts(
        StoreNodes, MemVT, NumStoresToMerge, /*IsConstantSrc*/ false,
        /*UseVector*/ true, /*UseTrunc*/ false);

    StoreNodes.erase(StoreNodes.begin(), StoreNodes.begin() + NumStoresToMerge);
    NumConsecutiveStores -= NumStoresToMerge;
  }
  return MadeChange;
}

bool DAGCombiner::tryStoreMergeOfLoads(SmallVectorImpl<MemOpLink> &StoreNodes,
                                       unsigned NumConsecutiveStores, EVT MemVT,
                                       SDNode *RootNode, bool AllowVectors,
                                       bool IsNonTemporalStore,
                                       bool IsNonTemporalLoad) {
  LLVMContext &Context = *DAG.getContext();
  const DataLayout &DL = DAG.getDataLayout();
  int64_t ElementSizeBytes = MemVT.getStoreSize();
  unsigned NumMemElts = MemVT.isVector() ? MemVT.getVectorNumElements() : 1;
  bool MadeChange = false;

  // Look for load nodes which are used by the stored values.
  SmallVector<MemOpLink, 8> LoadNodes;

  // Find acceptable loads. Loads need to have the same chain (token factor),
  // must not be zext, volatile, indexed, and they must be consecutive.
  BaseIndexOffset LdBasePtr;

  for (unsigned i = 0; i < NumConsecutiveStores; ++i) {
    StoreSDNode *St = cast<StoreSDNode>(StoreNodes[i].MemNode);
    SDValue Val = peekThroughBitcasts(St->getValue());
    LoadSDNode *Ld = cast<LoadSDNode>(Val);

    BaseIndexOffset LdPtr = BaseIndexOffset::match(Ld, DAG);
    // If this is not the first ptr that we check.
    int64_t LdOffset = 0;
    if (LdBasePtr.getBase().getNode()) {
      // The base ptr must be the same.
      if (!LdBasePtr.equalBaseIndex(LdPtr, DAG, LdOffset))
        break;
    } else {
      // Check that all other base pointers are the same as this one.
      LdBasePtr = LdPtr;
    }

    // We found a potential memory operand to merge.
    LoadNodes.push_back(MemOpLink(Ld, LdOffset));
  }

  while (NumConsecutiveStores >= 2 && LoadNodes.size() >= 2) {
    Align RequiredAlignment;
    bool NeedRotate = false;
    if (LoadNodes.size() == 2) {
      // If we have load/store pair instructions and we only have two values,
      // don't bother merging.
      if (TLI.hasPairedLoad(MemVT, RequiredAlignment) &&
          StoreNodes[0].MemNode->getAlign() >= RequiredAlignment) {
        StoreNodes.erase(StoreNodes.begin(), StoreNodes.begin() + 2);
        LoadNodes.erase(LoadNodes.begin(), LoadNodes.begin() + 2);
        break;
      }
      // If the loads are reversed, see if we can rotate the halves into place.
      int64_t Offset0 = LoadNodes[0].OffsetFromBase;
      int64_t Offset1 = LoadNodes[1].OffsetFromBase;
      EVT PairVT = EVT::getIntegerVT(Context, ElementSizeBytes * 8 * 2);
      if (Offset0 - Offset1 == ElementSizeBytes &&
          (hasOperation(ISD::ROTL, PairVT) ||
           hasOperation(ISD::ROTR, PairVT))) {
        std::swap(LoadNodes[0], LoadNodes[1]);
        NeedRotate = true;
      }
    }
    LSBaseSDNode *FirstInChain = StoreNodes[0].MemNode;
    unsigned FirstStoreAS = FirstInChain->getAddressSpace();
    Align FirstStoreAlign = FirstInChain->getAlign();
    LoadSDNode *FirstLoad = cast<LoadSDNode>(LoadNodes[0].MemNode);

    // Scan the memory operations on the chain and find the first
    // non-consecutive load memory address. These variables hold the index in
    // the store node array.

    unsigned LastConsecutiveLoad = 1;

    // This variable refers to the size and not index in the array.
    unsigned LastLegalVectorType = 1;
    unsigned LastLegalIntegerType = 1;
    bool isDereferenceable = true;
    bool DoIntegerTruncate = false;
    int64_t StartAddress = LoadNodes[0].OffsetFromBase;
    SDValue LoadChain = FirstLoad->getChain();
    for (unsigned i = 1; i < LoadNodes.size(); ++i) {
      // All loads must share the same chain.
      if (LoadNodes[i].MemNode->getChain() != LoadChain)
        break;

      int64_t CurrAddress = LoadNodes[i].OffsetFromBase;
      if (CurrAddress - StartAddress != (ElementSizeBytes * i))
        break;
      LastConsecutiveLoad = i;

      if (isDereferenceable && !LoadNodes[i].MemNode->isDereferenceable())
        isDereferenceable = false;

      // Find a legal type for the vector store.
      unsigned Elts = (i + 1) * NumMemElts;
      EVT StoreTy = EVT::getVectorVT(Context, MemVT.getScalarType(), Elts);

      // Break early when size is too large to be legal.
      if (StoreTy.getSizeInBits() > MaximumLegalStoreInBits)
        break;

      unsigned IsFastSt = 0;
      unsigned IsFastLd = 0;
      // Don't try vector types if we need a rotate. We may still fail the
      // legality checks for the integer type, but we can't handle the rotate
      // case with vectors.
      // FIXME: We could use a shuffle in place of the rotate.
      if (!NeedRotate && TLI.isTypeLegal(StoreTy) &&
          TLI.canMergeStoresTo(FirstStoreAS, StoreTy,
                               DAG.getMachineFunction()) &&
          TLI.allowsMemoryAccess(Context, DL, StoreTy,
                                 *FirstInChain->getMemOperand(), &IsFastSt) &&
          IsFastSt &&
          TLI.allowsMemoryAccess(Context, DL, StoreTy,
                                 *FirstLoad->getMemOperand(), &IsFastLd) &&
          IsFastLd) {
        LastLegalVectorType = i + 1;
      }

      // Find a legal type for the integer store.
      unsigned SizeInBits = (i + 1) * ElementSizeBytes * 8;
      StoreTy = EVT::getIntegerVT(Context, SizeInBits);
      if (TLI.isTypeLegal(StoreTy) &&
          TLI.canMergeStoresTo(FirstStoreAS, StoreTy,
                               DAG.getMachineFunction()) &&
          TLI.allowsMemoryAccess(Context, DL, StoreTy,
                                 *FirstInChain->getMemOperand(), &IsFastSt) &&
          IsFastSt &&
          TLI.allowsMemoryAccess(Context, DL, StoreTy,
                                 *FirstLoad->getMemOperand(), &IsFastLd) &&
          IsFastLd) {
        LastLegalIntegerType = i + 1;
        DoIntegerTruncate = false;
        // Or check whether a truncstore and extload is legal.
      } else if (TLI.getTypeAction(Context, StoreTy) ==
                 TargetLowering::TypePromoteInteger) {
        EVT LegalizedStoredValTy = TLI.getTypeToTransformTo(Context, StoreTy);
        if (TLI.isTruncStoreLegal(LegalizedStoredValTy, StoreTy) &&
            TLI.canMergeStoresTo(FirstStoreAS, LegalizedStoredValTy,
                                 DAG.getMachineFunction()) &&
            TLI.isLoadExtLegal(ISD::ZEXTLOAD, LegalizedStoredValTy, StoreTy) &&
            TLI.isLoadExtLegal(ISD::SEXTLOAD, LegalizedStoredValTy, StoreTy) &&
            TLI.isLoadExtLegal(ISD::EXTLOAD, LegalizedStoredValTy, StoreTy) &&
            TLI.allowsMemoryAccess(Context, DL, StoreTy,
                                   *FirstInChain->getMemOperand(), &IsFastSt) &&
            IsFastSt &&
            TLI.allowsMemoryAccess(Context, DL, StoreTy,
                                   *FirstLoad->getMemOperand(), &IsFastLd) &&
            IsFastLd) {
          LastLegalIntegerType = i + 1;
          DoIntegerTruncate = true;
        }
      }
    }

    // Only use vector types if the vector type is larger than the integer
    // type. If they are the same, use integers.
    bool UseVectorTy =
        LastLegalVectorType > LastLegalIntegerType && AllowVectors;
    unsigned LastLegalType =
        std::max(LastLegalVectorType, LastLegalIntegerType);

    // We add +1 here because the LastXXX variables refer to location while
    // the NumElem refers to array/index size.
    unsigned NumElem = std::min(NumConsecutiveStores, LastConsecutiveLoad + 1);
    NumElem = std::min(LastLegalType, NumElem);
    Align FirstLoadAlign = FirstLoad->getAlign();

    if (NumElem < 2) {
      // We know that candidate stores are in order and of correct
      // shape. While there is no mergeable sequence from the
      // beginning one may start later in the sequence. The only
      // reason a merge of size N could have failed where another of
      // the same size would not have is if the alignment or either
      // the load or store has improved. Drop as many candidates as we
      // can here.
      unsigned NumSkip = 1;
      while ((NumSkip < LoadNodes.size()) &&
             (LoadNodes[NumSkip].MemNode->getAlign() <= FirstLoadAlign) &&
             (StoreNodes[NumSkip].MemNode->getAlign() <= FirstStoreAlign))
        NumSkip++;
      StoreNodes.erase(StoreNodes.begin(), StoreNodes.begin() + NumSkip);
      LoadNodes.erase(LoadNodes.begin(), LoadNodes.begin() + NumSkip);
      NumConsecutiveStores -= NumSkip;
      continue;
    }

    // Check that we can merge these candidates without causing a cycle.
    if (!checkMergeStoreCandidatesForDependencies(StoreNodes, NumElem,
                                                  RootNode)) {
      StoreNodes.erase(StoreNodes.begin(), StoreNodes.begin() + NumElem);
      LoadNodes.erase(LoadNodes.begin(), LoadNodes.begin() + NumElem);
      NumConsecutiveStores -= NumElem;
      continue;
    }

    // Find if it is better to use vectors or integers to load and store
    // to memory.
    EVT JointMemOpVT;
    if (UseVectorTy) {
      // Find a legal type for the vector store.
      unsigned Elts = NumElem * NumMemElts;
      JointMemOpVT = EVT::getVectorVT(Context, MemVT.getScalarType(), Elts);
    } else {
      unsigned SizeInBits = NumElem * ElementSizeBytes * 8;
      JointMemOpVT = EVT::getIntegerVT(Context, SizeInBits);
    }

    SDLoc LoadDL(LoadNodes[0].MemNode);
    SDLoc StoreDL(StoreNodes[0].MemNode);

    // The merged loads are required to have the same incoming chain, so
    // using the first's chain is acceptable.

    SDValue NewStoreChain = getMergeStoreChains(StoreNodes, NumElem);
    bool CanReusePtrInfo = hasSameUnderlyingObj(StoreNodes);
    AddToWorklist(NewStoreChain.getNode());

    MachineMemOperand::Flags LdMMOFlags =
        isDereferenceable ? MachineMemOperand::MODereferenceable
                          : MachineMemOperand::MONone;
    if (IsNonTemporalLoad)
      LdMMOFlags |= MachineMemOperand::MONonTemporal;

    LdMMOFlags |= TLI.getTargetMMOFlags(*FirstLoad);

    MachineMemOperand::Flags StMMOFlags = IsNonTemporalStore
                                              ? MachineMemOperand::MONonTemporal
                                              : MachineMemOperand::MONone;

    StMMOFlags |= TLI.getTargetMMOFlags(*StoreNodes[0].MemNode);

    SDValue NewLoad, NewStore;
    if (UseVectorTy || !DoIntegerTruncate) {
      NewLoad = DAG.getLoad(
          JointMemOpVT, LoadDL, FirstLoad->getChain(), FirstLoad->getBasePtr(),
          FirstLoad->getPointerInfo(), FirstLoadAlign, LdMMOFlags);
      SDValue StoreOp = NewLoad;
      if (NeedRotate) {
        unsigned LoadWidth = ElementSizeBytes * 8 * 2;
        assert(JointMemOpVT == EVT::getIntegerVT(Context, LoadWidth) &&
               "Unexpected type for rotate-able load pair");
        SDValue RotAmt =
            DAG.getShiftAmountConstant(LoadWidth / 2, JointMemOpVT, LoadDL);
        // Target can convert to the identical ROTR if it does not have ROTL.
        StoreOp = DAG.getNode(ISD::ROTL, LoadDL, JointMemOpVT, NewLoad, RotAmt);
      }
      NewStore = DAG.getStore(
          NewStoreChain, StoreDL, StoreOp, FirstInChain->getBasePtr(),
          CanReusePtrInfo ? FirstInChain->getPointerInfo()
                          : MachinePointerInfo(FirstStoreAS),
          FirstStoreAlign, StMMOFlags);
    } else { // This must be the truncstore/extload case
      EVT ExtendedTy =
          TLI.getTypeToTransformTo(*DAG.getContext(), JointMemOpVT);
      NewLoad = DAG.getExtLoad(ISD::EXTLOAD, LoadDL, ExtendedTy,
                               FirstLoad->getChain(), FirstLoad->getBasePtr(),
                               FirstLoad->getPointerInfo(), JointMemOpVT,
                               FirstLoadAlign, LdMMOFlags);
      NewStore = DAG.getTruncStore(
          NewStoreChain, StoreDL, NewLoad, FirstInChain->getBasePtr(),
          CanReusePtrInfo ? FirstInChain->getPointerInfo()
                          : MachinePointerInfo(FirstStoreAS),
          JointMemOpVT, FirstInChain->getAlign(),
          FirstInChain->getMemOperand()->getFlags());
    }

    // Transfer chain users from old loads to the new load.
    for (unsigned i = 0; i < NumElem; ++i) {
      LoadSDNode *Ld = cast<LoadSDNode>(LoadNodes[i].MemNode);
      DAG.ReplaceAllUsesOfValueWith(SDValue(Ld, 1),
                                    SDValue(NewLoad.getNode(), 1));
    }

    // Replace all stores with the new store. Recursively remove corresponding
    // values if they are no longer used.
    for (unsigned i = 0; i < NumElem; ++i) {
      SDValue Val = StoreNodes[i].MemNode->getOperand(1);
      CombineTo(StoreNodes[i].MemNode, NewStore);
      if (Val->use_empty())
        recursivelyDeleteUnusedNodes(Val.getNode());
    }

    MadeChange = true;
    StoreNodes.erase(StoreNodes.begin(), StoreNodes.begin() + NumElem);
    LoadNodes.erase(LoadNodes.begin(), LoadNodes.begin() + NumElem);
    NumConsecutiveStores -= NumElem;
  }
  return MadeChange;
}

bool DAGCombiner::mergeConsecutiveStores(StoreSDNode *St) {
  if (OptLevel == CodeGenOptLevel::None || !EnableStoreMerging)
    return false;

  // TODO: Extend this function to merge stores of scalable vectors.
  // (i.e. two <vscale x 8 x i8> stores can be merged to one <vscale x 16 x i8>
  // store since we know <vscale x 16 x i8> is exactly twice as large as
  // <vscale x 8 x i8>). Until then, bail out for scalable vectors.
  EVT MemVT = St->getMemoryVT();
  if (MemVT.isScalableVT())
    return false;
  if (!MemVT.isSimple() || MemVT.getSizeInBits() * 2 > MaximumLegalStoreInBits)
    return false;

  // This function cannot currently deal with non-byte-sized memory sizes.
  int64_t ElementSizeBytes = MemVT.getStoreSize();
  if (ElementSizeBytes * 8 != (int64_t)MemVT.getSizeInBits())
    return false;

  // Do not bother looking at stored values that are not constants, loads, or
  // extracted vector elements.
  SDValue StoredVal = peekThroughBitcasts(St->getValue());
  const StoreSource StoreSrc = getStoreSource(StoredVal);
  if (StoreSrc == StoreSource::Unknown)
    return false;

  SmallVector<MemOpLink, 8> StoreNodes;
  // Find potential store merge candidates by searching through chain sub-DAG
  SDNode *RootNode = getStoreMergeCandidates(St, StoreNodes);

  // Check if there is anything to merge.
  if (StoreNodes.size() < 2)
    return false;

  // Sort the memory operands according to their distance from the
  // base pointer.
  llvm::sort(StoreNodes, [](MemOpLink LHS, MemOpLink RHS) {
    return LHS.OffsetFromBase < RHS.OffsetFromBase;
  });

  bool AllowVectors = !DAG.getMachineFunction().getFunction().hasFnAttribute(
      Attribute::NoImplicitFloat);
  bool IsNonTemporalStore = St->isNonTemporal();
  bool IsNonTemporalLoad = StoreSrc == StoreSource::Load &&
                           cast<LoadSDNode>(StoredVal)->isNonTemporal();

  // Store Merge attempts to merge the lowest stores. This generally
  // works out as if successful, as the remaining stores are checked
  // after the first collection of stores is merged. However, in the
  // case that a non-mergeable store is found first, e.g., {p[-2],
  // p[0], p[1], p[2], p[3]}, we would fail and miss the subsequent
  // mergeable cases. To prevent this, we prune such stores from the
  // front of StoreNodes here.
  bool MadeChange = false;
  while (StoreNodes.size() > 1) {
    unsigned NumConsecutiveStores =
        getConsecutiveStores(StoreNodes, ElementSizeBytes);
    // There are no more stores in the list to examine.
    if (NumConsecutiveStores == 0)
      return MadeChange;

    // We have at least 2 consecutive stores. Try to merge them.
    assert(NumConsecutiveStores >= 2 && "Expected at least 2 stores");
    switch (StoreSrc) {
    case StoreSource::Constant:
      MadeChange |= tryStoreMergeOfConstants(StoreNodes, NumConsecutiveStores,
                                             MemVT, RootNode, AllowVectors);
      break;

    case StoreSource::Extract:
      MadeChange |= tryStoreMergeOfExtracts(StoreNodes, NumConsecutiveStores,
                                            MemVT, RootNode);
      break;

    case StoreSource::Load:
      MadeChange |= tryStoreMergeOfLoads(StoreNodes, NumConsecutiveStores,
                                         MemVT, RootNode, AllowVectors,
                                         IsNonTemporalStore, IsNonTemporalLoad);
      break;

    default:
      llvm_unreachable("Unhandled store source type");
    }
  }

  // Remember if we failed to optimize, to save compile time.
  if (!MadeChange)
    ChainsWithoutMergeableStores.insert(RootNode);

  return MadeChange;
}

SDValue DAGCombiner::replaceStoreChain(StoreSDNode *ST, SDValue BetterChain) {
  SDLoc SL(ST);
  SDValue ReplStore;

  // Replace the chain to avoid dependency.
  if (ST->isTruncatingStore()) {
    ReplStore = DAG.getTruncStore(BetterChain, SL, ST->getValue(),
                                  ST->getBasePtr(), ST->getMemoryVT(),
                                  ST->getMemOperand());
  } else {
    ReplStore = DAG.getStore(BetterChain, SL, ST->getValue(), ST->getBasePtr(),
                             ST->getMemOperand());
  }

  // Create token to keep both nodes around.
  SDValue Token = DAG.getNode(ISD::TokenFactor, SL,
                              MVT::Other, ST->getChain(), ReplStore);

  // Make sure the new and old chains are cleaned up.
  AddToWorklist(Token.getNode());

  // Don't add users to work list.
  return CombineTo(ST, Token, false);
}

SDValue DAGCombiner::replaceStoreOfFPConstant(StoreSDNode *ST) {
  SDValue Value = ST->getValue();
  if (Value.getOpcode() == ISD::TargetConstantFP)
    return SDValue();

  if (!ISD::isNormalStore(ST))
    return SDValue();

  SDLoc DL(ST);

  SDValue Chain = ST->getChain();
  SDValue Ptr = ST->getBasePtr();

  const ConstantFPSDNode *CFP = cast<ConstantFPSDNode>(Value);

  // NOTE: If the original store is volatile, this transform must not increase
  // the number of stores.  For example, on x86-32 an f64 can be stored in one
  // processor operation but an i64 (which is not legal) requires two.  So the
  // transform should not be done in this case.

  SDValue Tmp;
  switch (CFP->getSimpleValueType(0).SimpleTy) {
  default:
    llvm_unreachable("Unknown FP type");
  case MVT::f16:    // We don't do this for these yet.
  case MVT::bf16:
  case MVT::f80:
  case MVT::f128:
  case MVT::ppcf128:
    return SDValue();
  case MVT::f32:
    if ((isTypeLegal(MVT::i32) && !LegalOperations && ST->isSimple()) ||
        TLI.isOperationLegalOrCustom(ISD::STORE, MVT::i32)) {
      Tmp = DAG.getConstant((uint32_t)CFP->getValueAPF().
                            bitcastToAPInt().getZExtValue(), SDLoc(CFP),
                            MVT::i32);
      return DAG.getStore(Chain, DL, Tmp, Ptr, ST->getMemOperand());
    }

    return SDValue();
  case MVT::f64:
    if ((TLI.isTypeLegal(MVT::i64) && !LegalOperations &&
         ST->isSimple()) ||
        TLI.isOperationLegalOrCustom(ISD::STORE, MVT::i64)) {
      Tmp = DAG.getConstant(CFP->getValueAPF().bitcastToAPInt().
                            getZExtValue(), SDLoc(CFP), MVT::i64);
      return DAG.getStore(Chain, DL, Tmp,
                          Ptr, ST->getMemOperand());
    }

    if (ST->isSimple() && TLI.isOperationLegalOrCustom(ISD::STORE, MVT::i32) &&
        !TLI.isFPImmLegal(CFP->getValueAPF(), MVT::f64)) {
      // Many FP stores are not made apparent until after legalize, e.g. for
      // argument passing.  Since this is so common, custom legalize the
      // 64-bit integer store into two 32-bit stores.
      uint64_t Val = CFP->getValueAPF().bitcastToAPInt().getZExtValue();
      SDValue Lo = DAG.getConstant(Val & 0xFFFFFFFF, SDLoc(CFP), MVT::i32);
      SDValue Hi = DAG.getConstant(Val >> 32, SDLoc(CFP), MVT::i32);
      if (DAG.getDataLayout().isBigEndian())
        std::swap(Lo, Hi);

      MachineMemOperand::Flags MMOFlags = ST->getMemOperand()->getFlags();
      AAMDNodes AAInfo = ST->getAAInfo();

      SDValue St0 = DAG.getStore(Chain, DL, Lo, Ptr, ST->getPointerInfo(),
                                 ST->getOriginalAlign(), MMOFlags, AAInfo);
      Ptr = DAG.getMemBasePlusOffset(Ptr, TypeSize::getFixed(4), DL);
      SDValue St1 = DAG.getStore(Chain, DL, Hi, Ptr,
                                 ST->getPointerInfo().getWithOffset(4),
                                 ST->getOriginalAlign(), MMOFlags, AAInfo);
      return DAG.getNode(ISD::TokenFactor, DL, MVT::Other,
                         St0, St1);
    }

    return SDValue();
  }
}

// (store (insert_vector_elt (load p), x, i), p) -> (store x, p+offset)
//
// If a store of a load with an element inserted into it has no other
// uses in between the chain, then we can consider the vector store
// dead and replace it with just the single scalar element store.
SDValue DAGCombiner::replaceStoreOfInsertLoad(StoreSDNode *ST) {
  SDLoc DL(ST);
  SDValue Value = ST->getValue();
  SDValue Ptr = ST->getBasePtr();
  SDValue Chain = ST->getChain();
  if (Value.getOpcode() != ISD::INSERT_VECTOR_ELT || !Value.hasOneUse())
    return SDValue();

  SDValue Elt = Value.getOperand(1);
  SDValue Idx = Value.getOperand(2);

  // If the element isn't byte sized or is implicitly truncated then we can't
  // compute an offset.
  EVT EltVT = Elt.getValueType();
  if (!EltVT.isByteSized() ||
      EltVT != Value.getOperand(0).getValueType().getVectorElementType())
    return SDValue();

  auto *Ld = dyn_cast<LoadSDNode>(Value.getOperand(0));
  if (!Ld || Ld->getBasePtr() != Ptr ||
      ST->getMemoryVT() != Ld->getMemoryVT() || !ST->isSimple() ||
      !ISD::isNormalStore(ST) ||
      Ld->getAddressSpace() != ST->getAddressSpace() ||
      !Chain.reachesChainWithoutSideEffects(SDValue(Ld, 1)))
    return SDValue();

  unsigned IsFast;
  if (!TLI.allowsMemoryAccess(*DAG.getContext(), DAG.getDataLayout(),
                              Elt.getValueType(), ST->getAddressSpace(),
                              ST->getAlign(), ST->getMemOperand()->getFlags(),
                              &IsFast) ||
      !IsFast)
    return SDValue();

  MachinePointerInfo PointerInfo(ST->getAddressSpace());

  // If the offset is a known constant then try to recover the pointer
  // info
  SDValue NewPtr;
  if (auto *CIdx = dyn_cast<ConstantSDNode>(Idx)) {
    unsigned COffset = CIdx->getSExtValue() * EltVT.getSizeInBits() / 8;
    NewPtr = DAG.getMemBasePlusOffset(Ptr, TypeSize::getFixed(COffset), DL);
    PointerInfo = ST->getPointerInfo().getWithOffset(COffset);
  } else {
    NewPtr = TLI.getVectorElementPointer(DAG, Ptr, Value.getValueType(), Idx);
  }

  return DAG.getStore(Chain, DL, Elt, NewPtr, PointerInfo, ST->getAlign(),
                      ST->getMemOperand()->getFlags());
}

SDValue DAGCombiner::visitATOMIC_STORE(SDNode *N) {
  AtomicSDNode *ST = cast<AtomicSDNode>(N);
  SDValue Val = ST->getVal();
  EVT VT = Val.getValueType();
  EVT MemVT = ST->getMemoryVT();

  if (MemVT.bitsLT(VT)) { // Is truncating store
    APInt TruncDemandedBits = APInt::getLowBitsSet(VT.getScalarSizeInBits(),
                                                   MemVT.getScalarSizeInBits());
    // See if we can simplify the operation with SimplifyDemandedBits, which
    // only works if the value has a single use.
    if (SimplifyDemandedBits(Val, TruncDemandedBits))
      return SDValue(N, 0);
  }

  return SDValue();
}

SDValue DAGCombiner::visitSTORE(SDNode *N) {
  StoreSDNode *ST  = cast<StoreSDNode>(N);
  SDValue Chain = ST->getChain();
  SDValue Value = ST->getValue();
  SDValue Ptr   = ST->getBasePtr();

  // If this is a store of a bit convert, store the input value if the
  // resultant store does not need a higher alignment than the original.
  if (Value.getOpcode() == ISD::BITCAST && !ST->isTruncatingStore() &&
      ST->isUnindexed()) {
    EVT SVT = Value.getOperand(0).getValueType();
    // If the store is volatile, we only want to change the store type if the
    // resulting store is legal. Otherwise we might increase the number of
    // memory accesses. We don't care if the original type was legal or not
    // as we assume software couldn't rely on the number of accesses of an
    // illegal type.
    // TODO: May be able to relax for unordered atomics (see D66309)
    if (((!LegalOperations && ST->isSimple()) ||
         TLI.isOperationLegal(ISD::STORE, SVT)) &&
        TLI.isStoreBitCastBeneficial(Value.getValueType(), SVT,
                                     DAG, *ST->getMemOperand())) {
      return DAG.getStore(Chain, SDLoc(N), Value.getOperand(0), Ptr,
                          ST->getMemOperand());
    }
  }

  // Turn 'store undef, Ptr' -> nothing.
  if (Value.isUndef() && ST->isUnindexed() && !ST->isVolatile())
    return Chain;

  // Try to infer better alignment information than the store already has.
  if (OptLevel != CodeGenOptLevel::None && ST->isUnindexed() &&
      !ST->isAtomic()) {
    if (MaybeAlign Alignment = DAG.InferPtrAlign(Ptr)) {
      if (*Alignment > ST->getAlign() &&
          isAligned(*Alignment, ST->getSrcValueOffset())) {
        SDValue NewStore =
            DAG.getTruncStore(Chain, SDLoc(N), Value, Ptr, ST->getPointerInfo(),
                              ST->getMemoryVT(), *Alignment,
                              ST->getMemOperand()->getFlags(), ST->getAAInfo());
        // NewStore will always be N as we are only refining the alignment
        assert(NewStore.getNode() == N);
        (void)NewStore;
      }
    }
  }

  // Try transforming a pair floating point load / store ops to integer
  // load / store ops.
  if (SDValue NewST = TransformFPLoadStorePair(N))
    return NewST;

  // Try transforming several stores into STORE (BSWAP).
  if (SDValue Store = mergeTruncStores(ST))
    return Store;

  if (ST->isUnindexed()) {
    // Walk up chain skipping non-aliasing memory nodes, on this store and any
    // adjacent stores.
    if (findBetterNeighborChains(ST)) {
      // replaceStoreChain uses CombineTo, which handled all of the worklist
      // manipulation. Return the original node to not do anything else.
      return SDValue(ST, 0);
    }
    Chain = ST->getChain();
  }

  // FIXME: is there such a thing as a truncating indexed store?
  if (ST->isTruncatingStore() && ST->isUnindexed() &&
      Value.getValueType().isInteger() &&
      (!isa<ConstantSDNode>(Value) ||
       !cast<ConstantSDNode>(Value)->isOpaque())) {
    // Convert a truncating store of a extension into a standard store.
    if ((Value.getOpcode() == ISD::ZERO_EXTEND ||
         Value.getOpcode() == ISD::SIGN_EXTEND ||
         Value.getOpcode() == ISD::ANY_EXTEND) &&
        Value.getOperand(0).getValueType() == ST->getMemoryVT() &&
        TLI.isOperationLegalOrCustom(ISD::STORE, ST->getMemoryVT()))
      return DAG.getStore(Chain, SDLoc(N), Value.getOperand(0), Ptr,
                          ST->getMemOperand());

    APInt TruncDemandedBits =
        APInt::getLowBitsSet(Value.getScalarValueSizeInBits(),
                             ST->getMemoryVT().getScalarSizeInBits());

    // See if we can simplify the operation with SimplifyDemandedBits, which
    // only works if the value has a single use.
    AddToWorklist(Value.getNode());
    if (SimplifyDemandedBits(Value, TruncDemandedBits)) {
      // Re-visit the store if anything changed and the store hasn't been merged
      // with another node (N is deleted) SimplifyDemandedBits will add Value's
      // node back to the worklist if necessary, but we also need to re-visit
      // the Store node itself.
      if (N->getOpcode() != ISD::DELETED_NODE)
        AddToWorklist(N);
      return SDValue(N, 0);
    }

    // Otherwise, see if we can simplify the input to this truncstore with
    // knowledge that only the low bits are being used.  For example:
    // "truncstore (or (shl x, 8), y), i8"  -> "truncstore y, i8"
    if (SDValue Shorter =
            TLI.SimplifyMultipleUseDemandedBits(Value, TruncDemandedBits, DAG))
      return DAG.getTruncStore(Chain, SDLoc(N), Shorter, Ptr, ST->getMemoryVT(),
                               ST->getMemOperand());

    // If we're storing a truncated constant, see if we can simplify it.
    // TODO: Move this to targetShrinkDemandedConstant?
    if (auto *Cst = dyn_cast<ConstantSDNode>(Value))
      if (!Cst->isOpaque()) {
        const APInt &CValue = Cst->getAPIntValue();
        APInt NewVal = CValue & TruncDemandedBits;
        if (NewVal != CValue) {
          SDValue Shorter =
              DAG.getConstant(NewVal, SDLoc(N), Value.getValueType());
          return DAG.getTruncStore(Chain, SDLoc(N), Shorter, Ptr,
                                   ST->getMemoryVT(), ST->getMemOperand());
        }
      }
  }

  // If this is a load followed by a store to the same location, then the store
  // is dead/noop. Peek through any truncates if canCombineTruncStore failed.
  // TODO: Add big-endian truncate support with test coverage.
  // TODO: Can relax for unordered atomics (see D66309)
  SDValue TruncVal = DAG.getDataLayout().isLittleEndian()
                         ? peekThroughTruncates(Value)
                         : Value;
  if (auto *Ld = dyn_cast<LoadSDNode>(TruncVal)) {
    if (Ld->getBasePtr() == Ptr && ST->getMemoryVT() == Ld->getMemoryVT() &&
        ST->isUnindexed() && ST->isSimple() &&
        Ld->getAddressSpace() == ST->getAddressSpace() &&
        // There can't be any side effects between the load and store, such as
        // a call or store.
        Chain.reachesChainWithoutSideEffects(SDValue(Ld, 1))) {
      // The store is dead, remove it.
      return Chain;
    }
  }

  // Try scalarizing vector stores of loads where we only change one element
  if (SDValue NewST = replaceStoreOfInsertLoad(ST))
    return NewST;

  // TODO: Can relax for unordered atomics (see D66309)
  if (StoreSDNode *ST1 = dyn_cast<StoreSDNode>(Chain)) {
    if (ST->isUnindexed() && ST->isSimple() &&
        ST1->isUnindexed() && ST1->isSimple()) {
      if (OptLevel != CodeGenOptLevel::None && ST1->getBasePtr() == Ptr &&
          ST1->getValue() == Value && ST->getMemoryVT() == ST1->getMemoryVT() &&
          ST->getAddressSpace() == ST1->getAddressSpace()) {
        // If this is a store followed by a store with the same value to the
        // same location, then the store is dead/noop.
        return Chain;
      }

      if (OptLevel != CodeGenOptLevel::None && ST1->hasOneUse() &&
          !ST1->getBasePtr().isUndef() &&
          ST->getAddressSpace() == ST1->getAddressSpace()) {
        // If we consider two stores and one smaller in size is a scalable
        // vector type and another one a bigger size store with a fixed type,
        // then we could not allow the scalable store removal because we don't
        // know its final size in the end.
        if (ST->getMemoryVT().isScalableVector() ||
            ST1->getMemoryVT().isScalableVector()) {
          if (ST1->getBasePtr() == Ptr &&
              TypeSize::isKnownLE(ST1->getMemoryVT().getStoreSize(),
                                  ST->getMemoryVT().getStoreSize())) {
            CombineTo(ST1, ST1->getChain());
            return SDValue(N, 0);
          }
        } else {
          const BaseIndexOffset STBase = BaseIndexOffset::match(ST, DAG);
          const BaseIndexOffset ChainBase = BaseIndexOffset::match(ST1, DAG);
          // If this is a store who's preceding store to a subset of the current
          // location and no one other node is chained to that store we can
          // effectively drop the store. Do not remove stores to undef as they
          // may be used as data sinks.
          if (STBase.contains(DAG, ST->getMemoryVT().getFixedSizeInBits(),
                              ChainBase,
                              ST1->getMemoryVT().getFixedSizeInBits())) {
            CombineTo(ST1, ST1->getChain());
            return SDValue(N, 0);
          }
        }
      }
    }
  }

  // If this is an FP_ROUND or TRUNC followed by a store, fold this into a
  // truncating store.  We can do this even if this is already a truncstore.
  if ((Value.getOpcode() == ISD::FP_ROUND ||
       Value.getOpcode() == ISD::TRUNCATE) &&
      Value->hasOneUse() && ST->isUnindexed() &&
      TLI.canCombineTruncStore(Value.getOperand(0).getValueType(),
                               ST->getMemoryVT(), LegalOperations)) {
    return DAG.getTruncStore(Chain, SDLoc(N), Value.getOperand(0),
                             Ptr, ST->getMemoryVT(), ST->getMemOperand());
  }

  // Always perform this optimization before types are legal. If the target
  // prefers, also try this after legalization to catch stores that were created
  // by intrinsics or other nodes.
  if (!LegalTypes || (TLI.mergeStoresAfterLegalization(ST->getMemoryVT()))) {
    while (true) {
      // There can be multiple store sequences on the same chain.
      // Keep trying to merge store sequences until we are unable to do so
      // or until we merge the last store on the chain.
      bool Changed = mergeConsecutiveStores(ST);
      if (!Changed) break;
      // Return N as merge only uses CombineTo and no worklist clean
      // up is necessary.
      if (N->getOpcode() == ISD::DELETED_NODE || !isa<StoreSDNode>(N))
        return SDValue(N, 0);
    }
  }

  // Try transforming N to an indexed store.
  if (CombineToPreIndexedLoadStore(N) || CombineToPostIndexedLoadStore(N))
    return SDValue(N, 0);

  // Turn 'store float 1.0, Ptr' -> 'store int 0x12345678, Ptr'
  //
  // Make sure to do this only after attempting to merge stores in order to
  //  avoid changing the types of some subset of stores due to visit order,
  //  preventing their merging.
  if (isa<ConstantFPSDNode>(ST->getValue())) {
    if (SDValue NewSt = replaceStoreOfFPConstant(ST))
      return NewSt;
  }

  if (SDValue NewSt = splitMergedValStore(ST))
    return NewSt;

  return ReduceLoadOpStoreWidth(N);
}

SDValue DAGCombiner::visitLIFETIME_END(SDNode *N) {
  const auto *LifetimeEnd = cast<LifetimeSDNode>(N);
  if (!LifetimeEnd->hasOffset())
    return SDValue();

  const BaseIndexOffset LifetimeEndBase(N->getOperand(1), SDValue(),
                                        LifetimeEnd->getOffset(), false);

  // We walk up the chains to find stores.
  SmallVector<SDValue, 8> Chains = {N->getOperand(0)};
  while (!Chains.empty()) {
    SDValue Chain = Chains.pop_back_val();
    if (!Chain.hasOneUse())
      continue;
    switch (Chain.getOpcode()) {
    case ISD::TokenFactor:
      for (unsigned Nops = Chain.getNumOperands(); Nops;)
        Chains.push_back(Chain.getOperand(--Nops));
      break;
    case ISD::LIFETIME_START:
    case ISD::LIFETIME_END:
      // We can forward past any lifetime start/end that can be proven not to
      // alias the node.
      if (!mayAlias(Chain.getNode(), N))
        Chains.push_back(Chain.getOperand(0));
      break;
    case ISD::STORE: {
      StoreSDNode *ST = dyn_cast<StoreSDNode>(Chain);
      // TODO: Can relax for unordered atomics (see D66309)
      if (!ST->isSimple() || ST->isIndexed())
        continue;
      const TypeSize StoreSize = ST->getMemoryVT().getStoreSize();
      // The bounds of a scalable store are not known until runtime, so this
      // store cannot be elided.
      if (StoreSize.isScalable())
        continue;
      const BaseIndexOffset StoreBase = BaseIndexOffset::match(ST, DAG);
      // If we store purely within object bounds just before its lifetime ends,
      // we can remove the store.
      if (LifetimeEndBase.contains(DAG, LifetimeEnd->getSize() * 8, StoreBase,
                                   StoreSize.getFixedValue() * 8)) {
        LLVM_DEBUG(dbgs() << "\nRemoving store:"; StoreBase.dump();
                   dbgs() << "\nwithin LIFETIME_END of : ";
                   LifetimeEndBase.dump(); dbgs() << "\n");
        CombineTo(ST, ST->getChain());
        return SDValue(N, 0);
      }
    }
    }
  }
  return SDValue();
}

/// For the instruction sequence of store below, F and I values
/// are bundled together as an i64 value before being stored into memory.
/// Sometimes it is more efficent to generate separate stores for F and I,
/// which can remove the bitwise instructions or sink them to colder places.
///
///   (store (or (zext (bitcast F to i32) to i64),
///              (shl (zext I to i64), 32)), addr)  -->
///   (store F, addr) and (store I, addr+4)
///
/// Similarly, splitting for other merged store can also be beneficial, like:
/// For pair of {i32, i32}, i64 store --> two i32 stores.
/// For pair of {i32, i16}, i64 store --> two i32 stores.
/// For pair of {i16, i16}, i32 store --> two i16 stores.
/// For pair of {i16, i8},  i32 store --> two i16 stores.
/// For pair of {i8, i8},   i16 store --> two i8 stores.
///
/// We allow each target to determine specifically which kind of splitting is
/// supported.
///
/// The store patterns are commonly seen from the simple code snippet below
/// if only std::make_pair(...) is sroa transformed before inlined into hoo.
///   void goo(const std::pair<int, float> &);
///   hoo() {
///     ...
///     goo(std::make_pair(tmp, ftmp));
///     ...
///   }
///
SDValue DAGCombiner::splitMergedValStore(StoreSDNode *ST) {
  if (OptLevel == CodeGenOptLevel::None)
    return SDValue();

  // Can't change the number of memory accesses for a volatile store or break
  // atomicity for an atomic one.
  if (!ST->isSimple())
    return SDValue();

  SDValue Val = ST->getValue();
  SDLoc DL(ST);

  // Match OR operand.
  if (!Val.getValueType().isScalarInteger() || Val.getOpcode() != ISD::OR)
    return SDValue();

  // Match SHL operand and get Lower and Higher parts of Val.
  SDValue Op1 = Val.getOperand(0);
  SDValue Op2 = Val.getOperand(1);
  SDValue Lo, Hi;
  if (Op1.getOpcode() != ISD::SHL) {
    std::swap(Op1, Op2);
    if (Op1.getOpcode() != ISD::SHL)
      return SDValue();
  }
  Lo = Op2;
  Hi = Op1.getOperand(0);
  if (!Op1.hasOneUse())
    return SDValue();

  // Match shift amount to HalfValBitSize.
  unsigned HalfValBitSize = Val.getValueSizeInBits() / 2;
  ConstantSDNode *ShAmt = dyn_cast<ConstantSDNode>(Op1.getOperand(1));
  if (!ShAmt || ShAmt->getAPIntValue() != HalfValBitSize)
    return SDValue();

  // Lo and Hi are zero-extended from int with size less equal than 32
  // to i64.
  if (Lo.getOpcode() != ISD::ZERO_EXTEND || !Lo.hasOneUse() ||
      !Lo.getOperand(0).getValueType().isScalarInteger() ||
      Lo.getOperand(0).getValueSizeInBits() > HalfValBitSize ||
      Hi.getOpcode() != ISD::ZERO_EXTEND || !Hi.hasOneUse() ||
      !Hi.getOperand(0).getValueType().isScalarInteger() ||
      Hi.getOperand(0).getValueSizeInBits() > HalfValBitSize)
    return SDValue();

  // Use the EVT of low and high parts before bitcast as the input
  // of target query.
  EVT LowTy = (Lo.getOperand(0).getOpcode() == ISD::BITCAST)
                  ? Lo.getOperand(0).getValueType()
                  : Lo.getValueType();
  EVT HighTy = (Hi.getOperand(0).getOpcode() == ISD::BITCAST)
                   ? Hi.getOperand(0).getValueType()
                   : Hi.getValueType();
  if (!TLI.isMultiStoresCheaperThanBitsMerge(LowTy, HighTy))
    return SDValue();

  // Start to split store.
  MachineMemOperand::Flags MMOFlags = ST->getMemOperand()->getFlags();
  AAMDNodes AAInfo = ST->getAAInfo();

  // Change the sizes of Lo and Hi's value types to HalfValBitSize.
  EVT VT = EVT::getIntegerVT(*DAG.getContext(), HalfValBitSize);
  Lo = DAG.getNode(ISD::ZERO_EXTEND, DL, VT, Lo.getOperand(0));
  Hi = DAG.getNode(ISD::ZERO_EXTEND, DL, VT, Hi.getOperand(0));

  SDValue Chain = ST->getChain();
  SDValue Ptr = ST->getBasePtr();
  // Lower value store.
  SDValue St0 = DAG.getStore(Chain, DL, Lo, Ptr, ST->getPointerInfo(),
                             ST->getOriginalAlign(), MMOFlags, AAInfo);
  Ptr =
      DAG.getMemBasePlusOffset(Ptr, TypeSize::getFixed(HalfValBitSize / 8), DL);
  // Higher value store.
  SDValue St1 = DAG.getStore(
      St0, DL, Hi, Ptr, ST->getPointerInfo().getWithOffset(HalfValBitSize / 8),
      ST->getOriginalAlign(), MMOFlags, AAInfo);
  return St1;
}

// Merge an insertion into an existing shuffle:
// (insert_vector_elt (vector_shuffle X, Y, Mask),
//                   .(extract_vector_elt X, N), InsIndex)
//   --> (vector_shuffle X, Y, NewMask)
//  and variations where shuffle operands may be CONCAT_VECTORS.
static bool mergeEltWithShuffle(SDValue &X, SDValue &Y, ArrayRef<int> Mask,
                                SmallVectorImpl<int> &NewMask, SDValue Elt,
                                unsigned InsIndex) {
  if (Elt.getOpcode() != ISD::EXTRACT_VECTOR_ELT ||
      !isa<ConstantSDNode>(Elt.getOperand(1)))
    return false;

  // Vec's operand 0 is using indices from 0 to N-1 and
  // operand 1 from N to 2N - 1, where N is the number of
  // elements in the vectors.
  SDValue InsertVal0 = Elt.getOperand(0);
  int ElementOffset = -1;

  // We explore the inputs of the shuffle in order to see if we find the
  // source of the extract_vector_elt. If so, we can use it to modify the
  // shuffle rather than perform an insert_vector_elt.
  SmallVector<std::pair<int, SDValue>, 8> ArgWorkList;
  ArgWorkList.emplace_back(Mask.size(), Y);
  ArgWorkList.emplace_back(0, X);

  while (!ArgWorkList.empty()) {
    int ArgOffset;
    SDValue ArgVal;
    std::tie(ArgOffset, ArgVal) = ArgWorkList.pop_back_val();

    if (ArgVal == InsertVal0) {
      ElementOffset = ArgOffset;
      break;
    }

    // Peek through concat_vector.
    if (ArgVal.getOpcode() == ISD::CONCAT_VECTORS) {
      int CurrentArgOffset =
          ArgOffset + ArgVal.getValueType().getVectorNumElements();
      int Step = ArgVal.getOperand(0).getValueType().getVectorNumElements();
      for (SDValue Op : reverse(ArgVal->ops())) {
        CurrentArgOffset -= Step;
        ArgWorkList.emplace_back(CurrentArgOffset, Op);
      }

      // Make sure we went through all the elements and did not screw up index
      // computation.
      assert(CurrentArgOffset == ArgOffset);
    }
  }

  // If we failed to find a match, see if we can replace an UNDEF shuffle
  // operand.
  if (ElementOffset == -1) {
    if (!Y.isUndef() || InsertVal0.getValueType() != Y.getValueType())
      return false;
    ElementOffset = Mask.size();
    Y = InsertVal0;
  }

  NewMask.assign(Mask.begin(), Mask.end());
  NewMask[InsIndex] = ElementOffset + Elt.getConstantOperandVal(1);
  assert(NewMask[InsIndex] < (int)(2 * Mask.size()) && NewMask[InsIndex] >= 0 &&
         "NewMask[InsIndex] is out of bound");
  return true;
}

// Merge an insertion into an existing shuffle:
// (insert_vector_elt (vector_shuffle X, Y), (extract_vector_elt X, N),
// InsIndex)
//   --> (vector_shuffle X, Y) and variations where shuffle operands may be
//   CONCAT_VECTORS.
SDValue DAGCombiner::mergeInsertEltWithShuffle(SDNode *N, unsigned InsIndex) {
  assert(N->getOpcode() == ISD::INSERT_VECTOR_ELT &&
         "Expected extract_vector_elt");
  SDValue InsertVal = N->getOperand(1);
  SDValue Vec = N->getOperand(0);

  auto *SVN = dyn_cast<ShuffleVectorSDNode>(Vec);
  if (!SVN || !Vec.hasOneUse())
    return SDValue();

  ArrayRef<int> Mask = SVN->getMask();
  SDValue X = Vec.getOperand(0);
  SDValue Y = Vec.getOperand(1);

  SmallVector<int, 16> NewMask(Mask);
  if (mergeEltWithShuffle(X, Y, Mask, NewMask, InsertVal, InsIndex)) {
    SDValue LegalShuffle = TLI.buildLegalVectorShuffle(
        Vec.getValueType(), SDLoc(N), X, Y, NewMask, DAG);
    if (LegalShuffle)
      return LegalShuffle;
  }

  return SDValue();
}

// Convert a disguised subvector insertion into a shuffle:
// insert_vector_elt V, (bitcast X from vector type), IdxC -->
// bitcast(shuffle (bitcast V), (extended X), Mask)
// Note: We do not use an insert_subvector node because that requires a
// legal subvector type.
SDValue DAGCombiner::combineInsertEltToShuffle(SDNode *N, unsigned InsIndex) {
  assert(N->getOpcode() == ISD::INSERT_VECTOR_ELT &&
         "Expected extract_vector_elt");
  SDValue InsertVal = N->getOperand(1);

  if (InsertVal.getOpcode() != ISD::BITCAST || !InsertVal.hasOneUse() ||
      !InsertVal.getOperand(0).getValueType().isVector())
    return SDValue();

  SDValue SubVec = InsertVal.getOperand(0);
  SDValue DestVec = N->getOperand(0);
  EVT SubVecVT = SubVec.getValueType();
  EVT VT = DestVec.getValueType();
  unsigned NumSrcElts = SubVecVT.getVectorNumElements();
  // If the source only has a single vector element, the cost of creating adding
  // it to a vector is likely to exceed the cost of a insert_vector_elt.
  if (NumSrcElts == 1)
    return SDValue();
  unsigned ExtendRatio = VT.getSizeInBits() / SubVecVT.getSizeInBits();
  unsigned NumMaskVals = ExtendRatio * NumSrcElts;

  // Step 1: Create a shuffle mask that implements this insert operation. The
  // vector that we are inserting into will be operand 0 of the shuffle, so
  // those elements are just 'i'. The inserted subvector is in the first
  // positions of operand 1 of the shuffle. Example:
  // insert v4i32 V, (v2i16 X), 2 --> shuffle v8i16 V', X', {0,1,2,3,8,9,6,7}
  SmallVector<int, 16> Mask(NumMaskVals);
  for (unsigned i = 0; i != NumMaskVals; ++i) {
    if (i / NumSrcElts == InsIndex)
      Mask[i] = (i % NumSrcElts) + NumMaskVals;
    else
      Mask[i] = i;
  }

  // Bail out if the target can not handle the shuffle we want to create.
  EVT SubVecEltVT = SubVecVT.getVectorElementType();
  EVT ShufVT = EVT::getVectorVT(*DAG.getContext(), SubVecEltVT, NumMaskVals);
  if (!TLI.isShuffleMaskLegal(Mask, ShufVT))
    return SDValue();

  // Step 2: Create a wide vector from the inserted source vector by appending
  // undefined elements. This is the same size as our destination vector.
  SDLoc DL(N);
  SmallVector<SDValue, 8> ConcatOps(ExtendRatio, DAG.getUNDEF(SubVecVT));
  ConcatOps[0] = SubVec;
  SDValue PaddedSubV = DAG.getNode(ISD::CONCAT_VECTORS, DL, ShufVT, ConcatOps);

  // Step 3: Shuffle in the padded subvector.
  SDValue DestVecBC = DAG.getBitcast(ShufVT, DestVec);
  SDValue Shuf = DAG.getVectorShuffle(ShufVT, DL, DestVecBC, PaddedSubV, Mask);
  AddToWorklist(PaddedSubV.getNode());
  AddToWorklist(DestVecBC.getNode());
  AddToWorklist(Shuf.getNode());
  return DAG.getBitcast(VT, Shuf);
}

// Combine insert(shuffle(load, <u,0,1,2>), load, 0) into a single load if
// possible and the new load will be quick. We use more loads but less shuffles
// and inserts.
SDValue DAGCombiner::combineInsertEltToLoad(SDNode *N, unsigned InsIndex) {
  EVT VT = N->getValueType(0);

  // InsIndex is expected to be the first of last lane.
  if (!VT.isFixedLengthVector() ||
      (InsIndex != 0 && InsIndex != VT.getVectorNumElements() - 1))
    return SDValue();

  // Look for a shuffle with the mask u,0,1,2,3,4,5,6 or 1,2,3,4,5,6,7,u
  // depending on the InsIndex.
  auto *Shuffle = dyn_cast<ShuffleVectorSDNode>(N->getOperand(0));
  SDValue Scalar = N->getOperand(1);
  if (!Shuffle || !all_of(enumerate(Shuffle->getMask()), [&](auto P) {
        return InsIndex == P.index() || P.value() < 0 ||
               (InsIndex == 0 && P.value() == (int)P.index() - 1) ||
               (InsIndex == VT.getVectorNumElements() - 1 &&
                P.value() == (int)P.index() + 1);
      }))
    return SDValue();

  // We optionally skip over an extend so long as both loads are extended in the
  // same way from the same type.
  unsigned Extend = 0;
  if (Scalar.getOpcode() == ISD::ZERO_EXTEND ||
      Scalar.getOpcode() == ISD::SIGN_EXTEND ||
      Scalar.getOpcode() == ISD::ANY_EXTEND) {
    Extend = Scalar.getOpcode();
    Scalar = Scalar.getOperand(0);
  }

  auto *ScalarLoad = dyn_cast<LoadSDNode>(Scalar);
  if (!ScalarLoad)
    return SDValue();

  SDValue Vec = Shuffle->getOperand(0);
  if (Extend) {
    if (Vec.getOpcode() != Extend)
      return SDValue();
    Vec = Vec.getOperand(0);
  }
  auto *VecLoad = dyn_cast<LoadSDNode>(Vec);
  if (!VecLoad || Vec.getValueType().getScalarType() != Scalar.getValueType())
    return SDValue();

  int EltSize = ScalarLoad->getValueType(0).getScalarSizeInBits();
  if (EltSize == 0 || EltSize % 8 != 0 || !ScalarLoad->isSimple() ||
      !VecLoad->isSimple() || VecLoad->getExtensionType() != ISD::NON_EXTLOAD ||
      ScalarLoad->getExtensionType() != ISD::NON_EXTLOAD ||
      ScalarLoad->getAddressSpace() != VecLoad->getAddressSpace())
    return SDValue();

  // Check that the offset between the pointers to produce a single continuous
  // load.
  if (InsIndex == 0) {
    if (!DAG.areNonVolatileConsecutiveLoads(ScalarLoad, VecLoad, EltSize / 8,
                                            -1))
      return SDValue();
  } else {
    if (!DAG.areNonVolatileConsecutiveLoads(
            VecLoad, ScalarLoad, VT.getVectorNumElements() * EltSize / 8, -1))
      return SDValue();
  }

  // And that the new unaligned load will be fast.
  unsigned IsFast = 0;
  Align NewAlign = commonAlignment(VecLoad->getAlign(), EltSize / 8);
  if (!TLI.allowsMemoryAccess(*DAG.getContext(), DAG.getDataLayout(),
                              Vec.getValueType(), VecLoad->getAddressSpace(),
                              NewAlign, VecLoad->getMemOperand()->getFlags(),
                              &IsFast) ||
      !IsFast)
    return SDValue();

  // Calculate the new Ptr and create the new load.
  SDLoc DL(N);
  SDValue Ptr = ScalarLoad->getBasePtr();
  if (InsIndex != 0)
    Ptr = DAG.getNode(ISD::ADD, DL, Ptr.getValueType(), VecLoad->getBasePtr(),
                      DAG.getConstant(EltSize / 8, DL, Ptr.getValueType()));
  MachinePointerInfo PtrInfo =
      InsIndex == 0 ? ScalarLoad->getPointerInfo()
                    : VecLoad->getPointerInfo().getWithOffset(EltSize / 8);

  SDValue Load = DAG.getLoad(VecLoad->getValueType(0), DL,
                             ScalarLoad->getChain(), Ptr, PtrInfo, NewAlign);
  DAG.makeEquivalentMemoryOrdering(ScalarLoad, Load.getValue(1));
  DAG.makeEquivalentMemoryOrdering(VecLoad, Load.getValue(1));
  return Extend ? DAG.getNode(Extend, DL, VT, Load) : Load;
}

SDValue DAGCombiner::visitINSERT_VECTOR_ELT(SDNode *N) {
  SDValue InVec = N->getOperand(0);
  SDValue InVal = N->getOperand(1);
  SDValue EltNo = N->getOperand(2);
  SDLoc DL(N);

  EVT VT = InVec.getValueType();
  auto *IndexC = dyn_cast<ConstantSDNode>(EltNo);

  // Insert into out-of-bounds element is undefined.
  if (IndexC && VT.isFixedLengthVector() &&
      IndexC->getZExtValue() >= VT.getVectorNumElements())
    return DAG.getUNDEF(VT);

  // Remove redundant insertions:
  // (insert_vector_elt x (extract_vector_elt x idx) idx) -> x
  if (InVal.getOpcode() == ISD::EXTRACT_VECTOR_ELT &&
      InVec == InVal.getOperand(0) && EltNo == InVal.getOperand(1))
    return InVec;

  if (!IndexC) {
    // If this is variable insert to undef vector, it might be better to splat:
    // inselt undef, InVal, EltNo --> build_vector < InVal, InVal, ... >
    if (InVec.isUndef() && TLI.shouldSplatInsEltVarIndex(VT))
      return DAG.getSplat(VT, DL, InVal);
    return SDValue();
  }

  if (VT.isScalableVector())
    return SDValue();

  unsigned NumElts = VT.getVectorNumElements();

  // We must know which element is being inserted for folds below here.
  unsigned Elt = IndexC->getZExtValue();

  // Handle <1 x ???> vector insertion special cases.
  if (NumElts == 1) {
    // insert_vector_elt(x, extract_vector_elt(y, 0), 0) -> y
    if (InVal.getOpcode() == ISD::EXTRACT_VECTOR_ELT &&
        InVal.getOperand(0).getValueType() == VT &&
        isNullConstant(InVal.getOperand(1)))
      return InVal.getOperand(0);
  }

  // Canonicalize insert_vector_elt dag nodes.
  // Example:
  // (insert_vector_elt (insert_vector_elt A, Idx0), Idx1)
  // -> (insert_vector_elt (insert_vector_elt A, Idx1), Idx0)
  //
  // Do this only if the child insert_vector node has one use; also
  // do this only if indices are both constants and Idx1 < Idx0.
  if (InVec.getOpcode() == ISD::INSERT_VECTOR_ELT && InVec.hasOneUse()
      && isa<ConstantSDNode>(InVec.getOperand(2))) {
    unsigned OtherElt = InVec.getConstantOperandVal(2);
    if (Elt < OtherElt) {
      // Swap nodes.
      SDValue NewOp = DAG.getNode(ISD::INSERT_VECTOR_ELT, DL, VT,
                                  InVec.getOperand(0), InVal, EltNo);
      AddToWorklist(NewOp.getNode());
      return DAG.getNode(ISD::INSERT_VECTOR_ELT, SDLoc(InVec.getNode()),
                         VT, NewOp, InVec.getOperand(1), InVec.getOperand(2));
    }
  }

  if (SDValue Shuf = mergeInsertEltWithShuffle(N, Elt))
    return Shuf;

  if (SDValue Shuf = combineInsertEltToShuffle(N, Elt))
    return Shuf;

  if (SDValue Shuf = combineInsertEltToLoad(N, Elt))
    return Shuf;

  // Attempt to convert an insert_vector_elt chain into a legal build_vector.
  if (!LegalOperations || TLI.isOperationLegal(ISD::BUILD_VECTOR, VT)) {
    // vXi1 vector - we don't need to recurse.
    if (NumElts == 1)
      return DAG.getBuildVector(VT, DL, {InVal});

    // If we haven't already collected the element, insert into the op list.
    EVT MaxEltVT = InVal.getValueType();
    auto AddBuildVectorOp = [&](SmallVectorImpl<SDValue> &Ops, SDValue Elt,
                                unsigned Idx) {
      if (!Ops[Idx]) {
        Ops[Idx] = Elt;
        if (VT.isInteger()) {
          EVT EltVT = Elt.getValueType();
          MaxEltVT = MaxEltVT.bitsGE(EltVT) ? MaxEltVT : EltVT;
        }
      }
    };

    // Ensure all the operands are the same value type, fill any missing
    // operands with UNDEF and create the BUILD_VECTOR.
    auto CanonicalizeBuildVector = [&](SmallVectorImpl<SDValue> &Ops) {
      assert(Ops.size() == NumElts && "Unexpected vector size");
      for (SDValue &Op : Ops) {
        if (Op)
          Op = VT.isInteger() ? DAG.getAnyExtOrTrunc(Op, DL, MaxEltVT) : Op;
        else
          Op = DAG.getUNDEF(MaxEltVT);
      }
      return DAG.getBuildVector(VT, DL, Ops);
    };

    SmallVector<SDValue, 8> Ops(NumElts, SDValue());
    Ops[Elt] = InVal;

    // Recurse up a INSERT_VECTOR_ELT chain to build a BUILD_VECTOR.
    for (SDValue CurVec = InVec; CurVec;) {
      // UNDEF - build new BUILD_VECTOR from already inserted operands.
      if (CurVec.isUndef())
        return CanonicalizeBuildVector(Ops);

      // BUILD_VECTOR - insert unused operands and build new BUILD_VECTOR.
      if (CurVec.getOpcode() == ISD::BUILD_VECTOR && CurVec.hasOneUse()) {
        for (unsigned I = 0; I != NumElts; ++I)
          AddBuildVectorOp(Ops, CurVec.getOperand(I), I);
        return CanonicalizeBuildVector(Ops);
      }

      // SCALAR_TO_VECTOR - insert unused scalar and build new BUILD_VECTOR.
      if (CurVec.getOpcode() == ISD::SCALAR_TO_VECTOR && CurVec.hasOneUse()) {
        AddBuildVectorOp(Ops, CurVec.getOperand(0), 0);
        return CanonicalizeBuildVector(Ops);
      }

      // INSERT_VECTOR_ELT - insert operand and continue up the chain.
      if (CurVec.getOpcode() == ISD::INSERT_VECTOR_ELT && CurVec.hasOneUse())
        if (auto *CurIdx = dyn_cast<ConstantSDNode>(CurVec.getOperand(2)))
          if (CurIdx->getAPIntValue().ult(NumElts)) {
            unsigned Idx = CurIdx->getZExtValue();
            AddBuildVectorOp(Ops, CurVec.getOperand(1), Idx);

            // Found entire BUILD_VECTOR.
            if (all_of(Ops, [](SDValue Op) { return !!Op; }))
              return CanonicalizeBuildVector(Ops);

            CurVec = CurVec->getOperand(0);
            continue;
          }

      // VECTOR_SHUFFLE - if all the operands match the shuffle's sources,
      // update the shuffle mask (and second operand if we started with unary
      // shuffle) and create a new legal shuffle.
      if (CurVec.getOpcode() == ISD::VECTOR_SHUFFLE && CurVec.hasOneUse()) {
        auto *SVN = cast<ShuffleVectorSDNode>(CurVec);
        SDValue LHS = SVN->getOperand(0);
        SDValue RHS = SVN->getOperand(1);
        SmallVector<int, 16> Mask(SVN->getMask());
        bool Merged = true;
        for (auto I : enumerate(Ops)) {
          SDValue &Op = I.value();
          if (Op) {
            SmallVector<int, 16> NewMask;
            if (!mergeEltWithShuffle(LHS, RHS, Mask, NewMask, Op, I.index())) {
              Merged = false;
              break;
            }
            Mask = std::move(NewMask);
          }
        }
        if (Merged)
          if (SDValue NewShuffle =
                  TLI.buildLegalVectorShuffle(VT, DL, LHS, RHS, Mask, DAG))
            return NewShuffle;
      }

      // If all insertions are zero value, try to convert to AND mask.
      // TODO: Do this for -1 with OR mask?
      if (!LegalOperations && llvm::isNullConstant(InVal) &&
          all_of(Ops, [InVal](SDValue Op) { return !Op || Op == InVal; }) &&
          count_if(Ops, [InVal](SDValue Op) { return Op == InVal; }) >= 2) {
        SDValue Zero = DAG.getConstant(0, DL, MaxEltVT);
        SDValue AllOnes = DAG.getAllOnesConstant(DL, MaxEltVT);
        SmallVector<SDValue, 8> Mask(NumElts);
        for (unsigned I = 0; I != NumElts; ++I)
          Mask[I] = Ops[I] ? Zero : AllOnes;
        return DAG.getNode(ISD::AND, DL, VT, CurVec,
                           DAG.getBuildVector(VT, DL, Mask));
      }

      // Failed to find a match in the chain - bail.
      break;
    }

    // See if we can fill in the missing constant elements as zeros.
    // TODO: Should we do this for any constant?
    APInt DemandedZeroElts = APInt::getZero(NumElts);
    for (unsigned I = 0; I != NumElts; ++I)
      if (!Ops[I])
        DemandedZeroElts.setBit(I);

    if (DAG.MaskedVectorIsZero(InVec, DemandedZeroElts)) {
      SDValue Zero = VT.isInteger() ? DAG.getConstant(0, DL, MaxEltVT)
                                    : DAG.getConstantFP(0, DL, MaxEltVT);
      for (unsigned I = 0; I != NumElts; ++I)
        if (!Ops[I])
          Ops[I] = Zero;

      return CanonicalizeBuildVector(Ops);
    }
  }

  return SDValue();
}

SDValue DAGCombiner::scalarizeExtractedVectorLoad(SDNode *EVE, EVT InVecVT,
                                                  SDValue EltNo,
                                                  LoadSDNode *OriginalLoad) {
  assert(OriginalLoad->isSimple());

  EVT ResultVT = EVE->getValueType(0);
  EVT VecEltVT = InVecVT.getVectorElementType();

  // If the vector element type is not a multiple of a byte then we are unable
  // to correctly compute an address to load only the extracted element as a
  // scalar.
  if (!VecEltVT.isByteSized())
    return SDValue();

  ISD::LoadExtType ExtTy =
      ResultVT.bitsGT(VecEltVT) ? ISD::EXTLOAD : ISD::NON_EXTLOAD;
  if (!TLI.isOperationLegalOrCustom(ISD::LOAD, VecEltVT) ||
      !TLI.shouldReduceLoadWidth(OriginalLoad, ExtTy, VecEltVT))
    return SDValue();

  Align Alignment = OriginalLoad->getAlign();
  MachinePointerInfo MPI;
  SDLoc DL(EVE);
  if (auto *ConstEltNo = dyn_cast<ConstantSDNode>(EltNo)) {
    int Elt = ConstEltNo->getZExtValue();
    unsigned PtrOff = VecEltVT.getSizeInBits() * Elt / 8;
    MPI = OriginalLoad->getPointerInfo().getWithOffset(PtrOff);
    Alignment = commonAlignment(Alignment, PtrOff);
  } else {
    // Discard the pointer info except the address space because the memory
    // operand can't represent this new access since the offset is variable.
    MPI = MachinePointerInfo(OriginalLoad->getPointerInfo().getAddrSpace());
    Alignment = commonAlignment(Alignment, VecEltVT.getSizeInBits() / 8);
  }

  unsigned IsFast = 0;
  if (!TLI.allowsMemoryAccess(*DAG.getContext(), DAG.getDataLayout(), VecEltVT,
                              OriginalLoad->getAddressSpace(), Alignment,
                              OriginalLoad->getMemOperand()->getFlags(),
                              &IsFast) ||
      !IsFast)
    return SDValue();

  SDValue NewPtr = TLI.getVectorElementPointer(DAG, OriginalLoad->getBasePtr(),
                                               InVecVT, EltNo);

  // We are replacing a vector load with a scalar load. The new load must have
  // identical memory op ordering to the original.
  SDValue Load;
  if (ResultVT.bitsGT(VecEltVT)) {
    // If the result type of vextract is wider than the load, then issue an
    // extending load instead.
    ISD::LoadExtType ExtType =
        TLI.isLoadExtLegal(ISD::ZEXTLOAD, ResultVT, VecEltVT) ? ISD::ZEXTLOAD
                                                              : ISD::EXTLOAD;
    Load = DAG.getExtLoad(ExtType, DL, ResultVT, OriginalLoad->getChain(),
                          NewPtr, MPI, VecEltVT, Alignment,
                          OriginalLoad->getMemOperand()->getFlags(),
                          OriginalLoad->getAAInfo());
    DAG.makeEquivalentMemoryOrdering(OriginalLoad, Load);
  } else {
    // The result type is narrower or the same width as the vector element
    Load = DAG.getLoad(VecEltVT, DL, OriginalLoad->getChain(), NewPtr, MPI,
                       Alignment, OriginalLoad->getMemOperand()->getFlags(),
                       OriginalLoad->getAAInfo());
    DAG.makeEquivalentMemoryOrdering(OriginalLoad, Load);
    if (ResultVT.bitsLT(VecEltVT))
      Load = DAG.getNode(ISD::TRUNCATE, DL, ResultVT, Load);
    else
      Load = DAG.getBitcast(ResultVT, Load);
  }
  ++OpsNarrowed;
  return Load;
}

/// Transform a vector binary operation into a scalar binary operation by moving
/// the math/logic after an extract element of a vector.
static SDValue scalarizeExtractedBinop(SDNode *ExtElt, SelectionDAG &DAG,
                                       const SDLoc &DL, bool LegalOperations) {
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  SDValue Vec = ExtElt->getOperand(0);
  SDValue Index = ExtElt->getOperand(1);
  auto *IndexC = dyn_cast<ConstantSDNode>(Index);
  if (!IndexC || !TLI.isBinOp(Vec.getOpcode()) || !Vec.hasOneUse() ||
      Vec->getNumValues() != 1)
    return SDValue();

  // Targets may want to avoid this to prevent an expensive register transfer.
  if (!TLI.shouldScalarizeBinop(Vec))
    return SDValue();

  // Extracting an element of a vector constant is constant-folded, so this
  // transform is just replacing a vector op with a scalar op while moving the
  // extract.
  SDValue Op0 = Vec.getOperand(0);
  SDValue Op1 = Vec.getOperand(1);
  APInt SplatVal;
  if (isAnyConstantBuildVector(Op0, true) ||
      ISD::isConstantSplatVector(Op0.getNode(), SplatVal) ||
      isAnyConstantBuildVector(Op1, true) ||
      ISD::isConstantSplatVector(Op1.getNode(), SplatVal)) {
    // extractelt (binop X, C), IndexC --> binop (extractelt X, IndexC), C'
    // extractelt (binop C, X), IndexC --> binop C', (extractelt X, IndexC)
    EVT VT = ExtElt->getValueType(0);
    SDValue Ext0 = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, VT, Op0, Index);
    SDValue Ext1 = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, VT, Op1, Index);
    return DAG.getNode(Vec.getOpcode(), DL, VT, Ext0, Ext1);
  }

  return SDValue();
}

// Given a ISD::EXTRACT_VECTOR_ELT, which is a glorified bit sequence extract,
// recursively analyse all of it's users. and try to model themselves as
// bit sequence extractions. If all of them agree on the new, narrower element
// type, and all of them can be modelled as ISD::EXTRACT_VECTOR_ELT's of that
// new element type, do so now.
// This is mainly useful to recover from legalization that scalarized
// the vector as wide elements, but tries to rebuild it with narrower elements.
//
// Some more nodes could be modelled if that helps cover interesting patterns.
bool DAGCombiner::refineExtractVectorEltIntoMultipleNarrowExtractVectorElts(
    SDNode *N) {
  // We perform this optimization post type-legalization because
  // the type-legalizer often scalarizes integer-promoted vectors.
  // Performing this optimization before may cause legalizaton cycles.
  if (Level != AfterLegalizeVectorOps && Level != AfterLegalizeTypes)
    return false;

  // TODO: Add support for big-endian.
  if (DAG.getDataLayout().isBigEndian())
    return false;

  SDValue VecOp = N->getOperand(0);
  EVT VecVT = VecOp.getValueType();
  assert(!VecVT.isScalableVector() && "Only for fixed vectors.");

  // We must start with a constant extraction index.
  auto *IndexC = dyn_cast<ConstantSDNode>(N->getOperand(1));
  if (!IndexC)
    return false;

  assert(IndexC->getZExtValue() < VecVT.getVectorNumElements() &&
         "Original ISD::EXTRACT_VECTOR_ELT is undefinend?");

  // TODO: deal with the case of implicit anyext of the extraction.
  unsigned VecEltBitWidth = VecVT.getScalarSizeInBits();
  EVT ScalarVT = N->getValueType(0);
  if (VecVT.getScalarType() != ScalarVT)
    return false;

  // TODO: deal with the cases other than everything being integer-typed.
  if (!ScalarVT.isScalarInteger())
    return false;

  struct Entry {
    SDNode *Producer;

    // Which bits of VecOp does it contain?
    unsigned BitPos;
    int NumBits;
    // NOTE: the actual width of \p Producer may be wider than NumBits!

    Entry(Entry &&) = default;
    Entry(SDNode *Producer_, unsigned BitPos_, int NumBits_)
        : Producer(Producer_), BitPos(BitPos_), NumBits(NumBits_) {}

    Entry() = delete;
    Entry(const Entry &) = delete;
    Entry &operator=(const Entry &) = delete;
    Entry &operator=(Entry &&) = delete;
  };
  SmallVector<Entry, 32> Worklist;
  SmallVector<Entry, 32> Leafs;

  // We start at the "root" ISD::EXTRACT_VECTOR_ELT.
  Worklist.emplace_back(N, /*BitPos=*/VecEltBitWidth * IndexC->getZExtValue(),
                        /*NumBits=*/VecEltBitWidth);

  while (!Worklist.empty()) {
    Entry E = Worklist.pop_back_val();
    // Does the node not even use any of the VecOp bits?
    if (!(E.NumBits > 0 && E.BitPos < VecVT.getSizeInBits() &&
          E.BitPos + E.NumBits <= VecVT.getSizeInBits()))
      return false; // Let's allow the other combines clean this up first.
    // Did we fail to model any of the users of the Producer?
    bool ProducerIsLeaf = false;
    // Look at each user of this Producer.
    for (SDNode *User : E.Producer->uses()) {
      switch (User->getOpcode()) {
      // TODO: support ISD::BITCAST
      // TODO: support ISD::ANY_EXTEND
      // TODO: support ISD::ZERO_EXTEND
      // TODO: support ISD::SIGN_EXTEND
      case ISD::TRUNCATE:
        // Truncation simply means we keep position, but extract less bits.
        Worklist.emplace_back(User, E.BitPos,
                              /*NumBits=*/User->getValueSizeInBits(0));
        break;
      // TODO: support ISD::SRA
      // TODO: support ISD::SHL
      case ISD::SRL:
        // We should be shifting the Producer by a constant amount.
        if (auto *ShAmtC = dyn_cast<ConstantSDNode>(User->getOperand(1));
            User->getOperand(0).getNode() == E.Producer && ShAmtC) {
          // Logical right-shift means that we start extraction later,
          // but stop it at the same position we did previously.
          unsigned ShAmt = ShAmtC->getZExtValue();
          Worklist.emplace_back(User, E.BitPos + ShAmt, E.NumBits - ShAmt);
          break;
        }
        [[fallthrough]];
      default:
        // We can not model this user of the Producer.
        // Which means the current Producer will be a ISD::EXTRACT_VECTOR_ELT.
        ProducerIsLeaf = true;
        // Profitability check: all users that we can not model
        //                      must be ISD::BUILD_VECTOR's.
        if (User->getOpcode() != ISD::BUILD_VECTOR)
          return false;
        break;
      }
    }
    if (ProducerIsLeaf)
      Leafs.emplace_back(std::move(E));
  }

  unsigned NewVecEltBitWidth = Leafs.front().NumBits;

  // If we are still at the same element granularity, give up,
  if (NewVecEltBitWidth == VecEltBitWidth)
    return false;

  // The vector width must be a multiple of the new element width.
  if (VecVT.getSizeInBits() % NewVecEltBitWidth != 0)
    return false;

  // All leafs must agree on the new element width.
  // All leafs must not expect any "padding" bits ontop of that width.
  // All leafs must start extraction from multiple of that width.
  if (!all_of(Leafs, [NewVecEltBitWidth](const Entry &E) {
        return (unsigned)E.NumBits == NewVecEltBitWidth &&
               E.Producer->getValueSizeInBits(0) == NewVecEltBitWidth &&
               E.BitPos % NewVecEltBitWidth == 0;
      }))
    return false;

  EVT NewScalarVT = EVT::getIntegerVT(*DAG.getContext(), NewVecEltBitWidth);
  EVT NewVecVT = EVT::getVectorVT(*DAG.getContext(), NewScalarVT,
                                  VecVT.getSizeInBits() / NewVecEltBitWidth);

  if (LegalTypes &&
      !(TLI.isTypeLegal(NewScalarVT) && TLI.isTypeLegal(NewVecVT)))
    return false;

  if (LegalOperations &&
      !(TLI.isOperationLegalOrCustom(ISD::BITCAST, NewVecVT) &&
        TLI.isOperationLegalOrCustom(ISD::EXTRACT_VECTOR_ELT, NewVecVT)))
    return false;

  SDValue NewVecOp = DAG.getBitcast(NewVecVT, VecOp);
  for (const Entry &E : Leafs) {
    SDLoc DL(E.Producer);
    unsigned NewIndex = E.BitPos / NewVecEltBitWidth;
    assert(NewIndex < NewVecVT.getVectorNumElements() &&
           "Creating out-of-bounds ISD::EXTRACT_VECTOR_ELT?");
    SDValue V = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, NewScalarVT, NewVecOp,
                            DAG.getVectorIdxConstant(NewIndex, DL));
    CombineTo(E.Producer, V);
  }

  return true;
}

SDValue DAGCombiner::visitEXTRACT_VECTOR_ELT(SDNode *N) {
  SDValue VecOp = N->getOperand(0);
  SDValue Index = N->getOperand(1);
  EVT ScalarVT = N->getValueType(0);
  EVT VecVT = VecOp.getValueType();
  if (VecOp.isUndef())
    return DAG.getUNDEF(ScalarVT);

  // extract_vector_elt (insert_vector_elt vec, val, idx), idx) -> val
  //
  // This only really matters if the index is non-constant since other combines
  // on the constant elements already work.
  SDLoc DL(N);
  if (VecOp.getOpcode() == ISD::INSERT_VECTOR_ELT &&
      Index == VecOp.getOperand(2)) {
    SDValue Elt = VecOp.getOperand(1);
    AddUsersToWorklist(VecOp.getNode());
    return VecVT.isInteger() ? DAG.getAnyExtOrTrunc(Elt, DL, ScalarVT) : Elt;
  }

  // (vextract (scalar_to_vector val, 0) -> val
  if (VecOp.getOpcode() == ISD::SCALAR_TO_VECTOR) {
    // Only 0'th element of SCALAR_TO_VECTOR is defined.
    if (DAG.isKnownNeverZero(Index))
      return DAG.getUNDEF(ScalarVT);

    // Check if the result type doesn't match the inserted element type.
    // The inserted element and extracted element may have mismatched bitwidth.
    // As a result, EXTRACT_VECTOR_ELT may extend or truncate the extracted vector.
    SDValue InOp = VecOp.getOperand(0);
    if (InOp.getValueType() != ScalarVT) {
      assert(InOp.getValueType().isInteger() && ScalarVT.isInteger());
      if (InOp.getValueType().bitsGT(ScalarVT))
        return DAG.getNode(ISD::TRUNCATE, DL, ScalarVT, InOp);
      return DAG.getNode(ISD::ANY_EXTEND, DL, ScalarVT, InOp);
    }
    return InOp;
  }

  // extract_vector_elt of out-of-bounds element -> UNDEF
  auto *IndexC = dyn_cast<ConstantSDNode>(Index);
  if (IndexC && VecVT.isFixedLengthVector() &&
      IndexC->getAPIntValue().uge(VecVT.getVectorNumElements()))
    return DAG.getUNDEF(ScalarVT);

  // extract_vector_elt (build_vector x, y), 1 -> y
  if (((IndexC && VecOp.getOpcode() == ISD::BUILD_VECTOR) ||
       VecOp.getOpcode() == ISD::SPLAT_VECTOR) &&
      TLI.isTypeLegal(VecVT)) {
    assert((VecOp.getOpcode() != ISD::BUILD_VECTOR ||
            VecVT.isFixedLengthVector()) &&
           "BUILD_VECTOR used for scalable vectors");
    unsigned IndexVal =
        VecOp.getOpcode() == ISD::BUILD_VECTOR ? IndexC->getZExtValue() : 0;
    SDValue Elt = VecOp.getOperand(IndexVal);
    EVT InEltVT = Elt.getValueType();

    if (VecOp.hasOneUse() || TLI.aggressivelyPreferBuildVectorSources(VecVT) ||
        isNullConstant(Elt)) {
      // Sometimes build_vector's scalar input types do not match result type.
      if (ScalarVT == InEltVT)
        return Elt;

      // TODO: It may be useful to truncate if free if the build_vector
      // implicitly converts.
    }
  }

  if (SDValue BO = scalarizeExtractedBinop(N, DAG, DL, LegalOperations))
    return BO;

  if (VecVT.isScalableVector())
    return SDValue();

  // All the code from this point onwards assumes fixed width vectors, but it's
  // possible that some of the combinations could be made to work for scalable
  // vectors too.
  unsigned NumElts = VecVT.getVectorNumElements();
  unsigned VecEltBitWidth = VecVT.getScalarSizeInBits();

  // See if the extracted element is constant, in which case fold it if its
  // a legal fp immediate.
  if (IndexC && ScalarVT.isFloatingPoint()) {
    APInt EltMask = APInt::getOneBitSet(NumElts, IndexC->getZExtValue());
    KnownBits KnownElt = DAG.computeKnownBits(VecOp, EltMask);
    if (KnownElt.isConstant()) {
      APFloat CstFP =
          APFloat(ScalarVT.getFltSemantics(), KnownElt.getConstant());
      if (TLI.isFPImmLegal(CstFP, ScalarVT))
        return DAG.getConstantFP(CstFP, DL, ScalarVT);
    }
  }

  // TODO: These transforms should not require the 'hasOneUse' restriction, but
  // there are regressions on multiple targets without it. We can end up with a
  // mess of scalar and vector code if we reduce only part of the DAG to scalar.
  if (IndexC && VecOp.getOpcode() == ISD::BITCAST && VecVT.isInteger() &&
      VecOp.hasOneUse()) {
    // The vector index of the LSBs of the source depend on the endian-ness.
    bool IsLE = DAG.getDataLayout().isLittleEndian();
    unsigned ExtractIndex = IndexC->getZExtValue();
    // extract_elt (v2i32 (bitcast i64:x)), BCTruncElt -> i32 (trunc i64:x)
    unsigned BCTruncElt = IsLE ? 0 : NumElts - 1;
    SDValue BCSrc = VecOp.getOperand(0);
    if (ExtractIndex == BCTruncElt && BCSrc.getValueType().isScalarInteger())
      return DAG.getAnyExtOrTrunc(BCSrc, DL, ScalarVT);

    if (LegalTypes && BCSrc.getValueType().isInteger() &&
        BCSrc.getOpcode() == ISD::SCALAR_TO_VECTOR) {
      // ext_elt (bitcast (scalar_to_vec i64 X to v2i64) to v4i32), TruncElt -->
      // trunc i64 X to i32
      SDValue X = BCSrc.getOperand(0);
      EVT XVT = X.getValueType();
      assert(XVT.isScalarInteger() && ScalarVT.isScalarInteger() &&
             "Extract element and scalar to vector can't change element type "
             "from FP to integer.");
      unsigned XBitWidth = X.getValueSizeInBits();
      unsigned Scale = XBitWidth / VecEltBitWidth;
      BCTruncElt = IsLE ? 0 : Scale - 1;

      // An extract element return value type can be wider than its vector
      // operand element type. In that case, the high bits are undefined, so
      // it's possible that we may need to extend rather than truncate.
      if (ExtractIndex < Scale && XBitWidth > VecEltBitWidth) {
        assert(XBitWidth % VecEltBitWidth == 0 &&
               "Scalar bitwidth must be a multiple of vector element bitwidth");

        if (ExtractIndex != BCTruncElt) {
          unsigned ShiftIndex =
              IsLE ? ExtractIndex : (Scale - 1) - ExtractIndex;
          X = DAG.getNode(
              ISD::SRL, DL, XVT, X,
              DAG.getShiftAmountConstant(ShiftIndex * VecEltBitWidth, XVT, DL));
        }

        return DAG.getAnyExtOrTrunc(X, DL, ScalarVT);
      }
    }
  }

  // Transform: (EXTRACT_VECTOR_ELT( VECTOR_SHUFFLE )) -> EXTRACT_VECTOR_ELT.
  // We only perform this optimization before the op legalization phase because
  // we may introduce new vector instructions which are not backed by TD
  // patterns. For example on AVX, extracting elements from a wide vector
  // without using extract_subvector. However, if we can find an underlying
  // scalar value, then we can always use that.
  if (IndexC && VecOp.getOpcode() == ISD::VECTOR_SHUFFLE) {
    auto *Shuf = cast<ShuffleVectorSDNode>(VecOp);
    // Find the new index to extract from.
    int OrigElt = Shuf->getMaskElt(IndexC->getZExtValue());

    // Extracting an undef index is undef.
    if (OrigElt == -1)
      return DAG.getUNDEF(ScalarVT);

    // Select the right vector half to extract from.
    SDValue SVInVec;
    if (OrigElt < (int)NumElts) {
      SVInVec = VecOp.getOperand(0);
    } else {
      SVInVec = VecOp.getOperand(1);
      OrigElt -= NumElts;
    }

    if (SVInVec.getOpcode() == ISD::BUILD_VECTOR) {
      SDValue InOp = SVInVec.getOperand(OrigElt);
      if (InOp.getValueType() != ScalarVT) {
        assert(InOp.getValueType().isInteger() && ScalarVT.isInteger());
        InOp = DAG.getSExtOrTrunc(InOp, DL, ScalarVT);
      }

      return InOp;
    }

    // FIXME: We should handle recursing on other vector shuffles and
    // scalar_to_vector here as well.

    if (!LegalOperations ||
        // FIXME: Should really be just isOperationLegalOrCustom.
        TLI.isOperationLegal(ISD::EXTRACT_VECTOR_ELT, VecVT) ||
        TLI.isOperationExpand(ISD::VECTOR_SHUFFLE, VecVT)) {
      return DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, ScalarVT, SVInVec,
                         DAG.getVectorIdxConstant(OrigElt, DL));
    }
  }

  // If only EXTRACT_VECTOR_ELT nodes use the source vector we can
  // simplify it based on the (valid) extraction indices.
  if (llvm::all_of(VecOp->uses(), [&](SDNode *Use) {
        return Use->getOpcode() == ISD::EXTRACT_VECTOR_ELT &&
               Use->getOperand(0) == VecOp &&
               isa<ConstantSDNode>(Use->getOperand(1));
      })) {
    APInt DemandedElts = APInt::getZero(NumElts);
    for (SDNode *Use : VecOp->uses()) {
      auto *CstElt = cast<ConstantSDNode>(Use->getOperand(1));
      if (CstElt->getAPIntValue().ult(NumElts))
        DemandedElts.setBit(CstElt->getZExtValue());
    }
    if (SimplifyDemandedVectorElts(VecOp, DemandedElts, true)) {
      // We simplified the vector operand of this extract element. If this
      // extract is not dead, visit it again so it is folded properly.
      if (N->getOpcode() != ISD::DELETED_NODE)
        AddToWorklist(N);
      return SDValue(N, 0);
    }
    APInt DemandedBits = APInt::getAllOnes(VecEltBitWidth);
    if (SimplifyDemandedBits(VecOp, DemandedBits, DemandedElts, true)) {
      // We simplified the vector operand of this extract element. If this
      // extract is not dead, visit it again so it is folded properly.
      if (N->getOpcode() != ISD::DELETED_NODE)
        AddToWorklist(N);
      return SDValue(N, 0);
    }
  }

  if (refineExtractVectorEltIntoMultipleNarrowExtractVectorElts(N))
    return SDValue(N, 0);

  // Everything under here is trying to match an extract of a loaded value.
  // If the result of load has to be truncated, then it's not necessarily
  // profitable.
  bool BCNumEltsChanged = false;
  EVT ExtVT = VecVT.getVectorElementType();
  EVT LVT = ExtVT;
  if (ScalarVT.bitsLT(LVT) && !TLI.isTruncateFree(LVT, ScalarVT))
    return SDValue();

  if (VecOp.getOpcode() == ISD::BITCAST) {
    // Don't duplicate a load with other uses.
    if (!VecOp.hasOneUse())
      return SDValue();

    EVT BCVT = VecOp.getOperand(0).getValueType();
    if (!BCVT.isVector() || ExtVT.bitsGT(BCVT.getVectorElementType()))
      return SDValue();
    if (NumElts != BCVT.getVectorNumElements())
      BCNumEltsChanged = true;
    VecOp = VecOp.getOperand(0);
    ExtVT = BCVT.getVectorElementType();
  }

  // extract (vector load $addr), i --> load $addr + i * size
  if (!LegalOperations && !IndexC && VecOp.hasOneUse() &&
      ISD::isNormalLoad(VecOp.getNode()) &&
      !Index->hasPredecessor(VecOp.getNode())) {
    auto *VecLoad = dyn_cast<LoadSDNode>(VecOp);
    if (VecLoad && VecLoad->isSimple())
      return scalarizeExtractedVectorLoad(N, VecVT, Index, VecLoad);
  }

  // Perform only after legalization to ensure build_vector / vector_shuffle
  // optimizations have already been done.
  if (!LegalOperations || !IndexC)
    return SDValue();

  // (vextract (v4f32 load $addr), c) -> (f32 load $addr+c*size)
  // (vextract (v4f32 s2v (f32 load $addr)), c) -> (f32 load $addr+c*size)
  // (vextract (v4f32 shuffle (load $addr), <1,u,u,u>), 0) -> (f32 load $addr)
  int Elt = IndexC->getZExtValue();
  LoadSDNode *LN0 = nullptr;
  if (ISD::isNormalLoad(VecOp.getNode())) {
    LN0 = cast<LoadSDNode>(VecOp);
  } else if (VecOp.getOpcode() == ISD::SCALAR_TO_VECTOR &&
             VecOp.getOperand(0).getValueType() == ExtVT &&
             ISD::isNormalLoad(VecOp.getOperand(0).getNode())) {
    // Don't duplicate a load with other uses.
    if (!VecOp.hasOneUse())
      return SDValue();

    LN0 = cast<LoadSDNode>(VecOp.getOperand(0));
  }
  if (auto *Shuf = dyn_cast<ShuffleVectorSDNode>(VecOp)) {
    // (vextract (vector_shuffle (load $addr), v2, <1, u, u, u>), 1)
    // =>
    // (load $addr+1*size)

    // Don't duplicate a load with other uses.
    if (!VecOp.hasOneUse())
      return SDValue();

    // If the bit convert changed the number of elements, it is unsafe
    // to examine the mask.
    if (BCNumEltsChanged)
      return SDValue();

    // Select the input vector, guarding against out of range extract vector.
    int Idx = (Elt > (int)NumElts) ? -1 : Shuf->getMaskElt(Elt);
    VecOp = (Idx < (int)NumElts) ? VecOp.getOperand(0) : VecOp.getOperand(1);

    if (VecOp.getOpcode() == ISD::BITCAST) {
      // Don't duplicate a load with other uses.
      if (!VecOp.hasOneUse())
        return SDValue();

      VecOp = VecOp.getOperand(0);
    }
    if (ISD::isNormalLoad(VecOp.getNode())) {
      LN0 = cast<LoadSDNode>(VecOp);
      Elt = (Idx < (int)NumElts) ? Idx : Idx - (int)NumElts;
      Index = DAG.getConstant(Elt, DL, Index.getValueType());
    }
  } else if (VecOp.getOpcode() == ISD::CONCAT_VECTORS && !BCNumEltsChanged &&
             VecVT.getVectorElementType() == ScalarVT &&
             (!LegalTypes ||
              TLI.isTypeLegal(
                  VecOp.getOperand(0).getValueType().getVectorElementType()))) {
    // extract_vector_elt (concat_vectors v2i16:a, v2i16:b), 0
    //      -> extract_vector_elt a, 0
    // extract_vector_elt (concat_vectors v2i16:a, v2i16:b), 1
    //      -> extract_vector_elt a, 1
    // extract_vector_elt (concat_vectors v2i16:a, v2i16:b), 2
    //      -> extract_vector_elt b, 0
    // extract_vector_elt (concat_vectors v2i16:a, v2i16:b), 3
    //      -> extract_vector_elt b, 1
    EVT ConcatVT = VecOp.getOperand(0).getValueType();
    unsigned ConcatNumElts = ConcatVT.getVectorNumElements();
    SDValue NewIdx = DAG.getConstant(Elt % ConcatNumElts, DL,
                                     Index.getValueType());

    SDValue ConcatOp = VecOp.getOperand(Elt / ConcatNumElts);
    SDValue Elt = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL,
                              ConcatVT.getVectorElementType(),
                              ConcatOp, NewIdx);
    return DAG.getNode(ISD::BITCAST, DL, ScalarVT, Elt);
  }

  // Make sure we found a non-volatile load and the extractelement is
  // the only use.
  if (!LN0 || !LN0->hasNUsesOfValue(1,0) || !LN0->isSimple())
    return SDValue();

  // If Idx was -1 above, Elt is going to be -1, so just return undef.
  if (Elt == -1)
    return DAG.getUNDEF(LVT);

  return scalarizeExtractedVectorLoad(N, VecVT, Index, LN0);
}

// Simplify (build_vec (ext )) to (bitcast (build_vec ))
SDValue DAGCombiner::reduceBuildVecExtToExtBuildVec(SDNode *N) {
  // We perform this optimization post type-legalization because
  // the type-legalizer often scalarizes integer-promoted vectors.
  // Performing this optimization before may create bit-casts which
  // will be type-legalized to complex code sequences.
  // We perform this optimization only before the operation legalizer because we
  // may introduce illegal operations.
  if (Level != AfterLegalizeVectorOps && Level != AfterLegalizeTypes)
    return SDValue();

  unsigned NumInScalars = N->getNumOperands();
  SDLoc DL(N);
  EVT VT = N->getValueType(0);

  // Check to see if this is a BUILD_VECTOR of a bunch of values
  // which come from any_extend or zero_extend nodes. If so, we can create
  // a new BUILD_VECTOR using bit-casts which may enable other BUILD_VECTOR
  // optimizations. We do not handle sign-extend because we can't fill the sign
  // using shuffles.
  EVT SourceType = MVT::Other;
  bool AllAnyExt = true;

  for (unsigned i = 0; i != NumInScalars; ++i) {
    SDValue In = N->getOperand(i);
    // Ignore undef inputs.
    if (In.isUndef()) continue;

    bool AnyExt  = In.getOpcode() == ISD::ANY_EXTEND;
    bool ZeroExt = In.getOpcode() == ISD::ZERO_EXTEND;

    // Abort if the element is not an extension.
    if (!ZeroExt && !AnyExt) {
      SourceType = MVT::Other;
      break;
    }

    // The input is a ZeroExt or AnyExt. Check the original type.
    EVT InTy = In.getOperand(0).getValueType();

    // Check that all of the widened source types are the same.
    if (SourceType == MVT::Other)
      // First time.
      SourceType = InTy;
    else if (InTy != SourceType) {
      // Multiple income types. Abort.
      SourceType = MVT::Other;
      break;
    }

    // Check if all of the extends are ANY_EXTENDs.
    AllAnyExt &= AnyExt;
  }

  // In order to have valid types, all of the inputs must be extended from the
  // same source type and all of the inputs must be any or zero extend.
  // Scalar sizes must be a power of two.
  EVT OutScalarTy = VT.getScalarType();
  bool ValidTypes =
      SourceType != MVT::Other &&
      llvm::has_single_bit<uint32_t>(OutScalarTy.getSizeInBits()) &&
      llvm::has_single_bit<uint32_t>(SourceType.getSizeInBits());

  // Create a new simpler BUILD_VECTOR sequence which other optimizations can
  // turn into a single shuffle instruction.
  if (!ValidTypes)
    return SDValue();

  // If we already have a splat buildvector, then don't fold it if it means
  // introducing zeros.
  if (!AllAnyExt && DAG.isSplatValue(SDValue(N, 0), /*AllowUndefs*/ true))
    return SDValue();

  bool isLE = DAG.getDataLayout().isLittleEndian();
  unsigned ElemRatio = OutScalarTy.getSizeInBits()/SourceType.getSizeInBits();
  assert(ElemRatio > 1 && "Invalid element size ratio");
  SDValue Filler = AllAnyExt ? DAG.getUNDEF(SourceType):
                               DAG.getConstant(0, DL, SourceType);

  unsigned NewBVElems = ElemRatio * VT.getVectorNumElements();
  SmallVector<SDValue, 8> Ops(NewBVElems, Filler);

  // Populate the new build_vector
  for (unsigned i = 0, e = N->getNumOperands(); i != e; ++i) {
    SDValue Cast = N->getOperand(i);
    assert((Cast.getOpcode() == ISD::ANY_EXTEND ||
            Cast.getOpcode() == ISD::ZERO_EXTEND ||
            Cast.isUndef()) && "Invalid cast opcode");
    SDValue In;
    if (Cast.isUndef())
      In = DAG.getUNDEF(SourceType);
    else
      In = Cast->getOperand(0);
    unsigned Index = isLE ? (i * ElemRatio) :
                            (i * ElemRatio + (ElemRatio - 1));

    assert(Index < Ops.size() && "Invalid index");
    Ops[Index] = In;
  }

  // The type of the new BUILD_VECTOR node.
  EVT VecVT = EVT::getVectorVT(*DAG.getContext(), SourceType, NewBVElems);
  assert(VecVT.getSizeInBits() == VT.getSizeInBits() &&
         "Invalid vector size");
  // Check if the new vector type is legal.
  if (!isTypeLegal(VecVT) ||
      (!TLI.isOperationLegal(ISD::BUILD_VECTOR, VecVT) &&
       TLI.isOperationLegal(ISD::BUILD_VECTOR, VT)))
    return SDValue();

  // Make the new BUILD_VECTOR.
  SDValue BV = DAG.getBuildVector(VecVT, DL, Ops);

  // The new BUILD_VECTOR node has the potential to be further optimized.
  AddToWorklist(BV.getNode());
  // Bitcast to the desired type.
  return DAG.getBitcast(VT, BV);
}

// Simplify (build_vec (trunc $1)
//                     (trunc (srl $1 half-width))
//                     (trunc (srl $1 (2 * half-width))))
// to (bitcast $1)
SDValue DAGCombiner::reduceBuildVecTruncToBitCast(SDNode *N) {
  assert(N->getOpcode() == ISD::BUILD_VECTOR && "Expected build vector");

  EVT VT = N->getValueType(0);

  // Don't run this before LegalizeTypes if VT is legal.
  // Targets may have other preferences.
  if (Level < AfterLegalizeTypes && TLI.isTypeLegal(VT))
    return SDValue();

  // Only for little endian
  if (!DAG.getDataLayout().isLittleEndian())
    return SDValue();

  SDLoc DL(N);
  EVT OutScalarTy = VT.getScalarType();
  uint64_t ScalarTypeBitsize = OutScalarTy.getSizeInBits();

  // Only for power of two types to be sure that bitcast works well
  if (!isPowerOf2_64(ScalarTypeBitsize))
    return SDValue();

  unsigned NumInScalars = N->getNumOperands();

  // Look through bitcasts
  auto PeekThroughBitcast = [](SDValue Op) {
    if (Op.getOpcode() == ISD::BITCAST)
      return Op.getOperand(0);
    return Op;
  };

  // The source value where all the parts are extracted.
  SDValue Src;
  for (unsigned i = 0; i != NumInScalars; ++i) {
    SDValue In = PeekThroughBitcast(N->getOperand(i));
    // Ignore undef inputs.
    if (In.isUndef()) continue;

    if (In.getOpcode() != ISD::TRUNCATE)
      return SDValue();

    In = PeekThroughBitcast(In.getOperand(0));

    if (In.getOpcode() != ISD::SRL) {
      // For now only build_vec without shuffling, handle shifts here in the
      // future.
      if (i != 0)
        return SDValue();

      Src = In;
    } else {
      // In is SRL
      SDValue part = PeekThroughBitcast(In.getOperand(0));

      if (!Src) {
        Src = part;
      } else if (Src != part) {
        // Vector parts do not stem from the same variable
        return SDValue();
      }

      SDValue ShiftAmtVal = In.getOperand(1);
      if (!isa<ConstantSDNode>(ShiftAmtVal))
        return SDValue();

      uint64_t ShiftAmt = In.getConstantOperandVal(1);

      // The extracted value is not extracted at the right position
      if (ShiftAmt != i * ScalarTypeBitsize)
        return SDValue();
    }
  }

  // Only cast if the size is the same
  if (!Src || Src.getValueType().getSizeInBits() != VT.getSizeInBits())
    return SDValue();

  return DAG.getBitcast(VT, Src);
}

SDValue DAGCombiner::createBuildVecShuffle(const SDLoc &DL, SDNode *N,
                                           ArrayRef<int> VectorMask,
                                           SDValue VecIn1, SDValue VecIn2,
                                           unsigned LeftIdx, bool DidSplitVec) {
  SDValue ZeroIdx = DAG.getVectorIdxConstant(0, DL);

  EVT VT = N->getValueType(0);
  EVT InVT1 = VecIn1.getValueType();
  EVT InVT2 = VecIn2.getNode() ? VecIn2.getValueType() : InVT1;

  unsigned NumElems = VT.getVectorNumElements();
  unsigned ShuffleNumElems = NumElems;

  // If we artificially split a vector in two already, then the offsets in the
  // operands will all be based off of VecIn1, even those in VecIn2.
  unsigned Vec2Offset = DidSplitVec ? 0 : InVT1.getVectorNumElements();

  uint64_t VTSize = VT.getFixedSizeInBits();
  uint64_t InVT1Size = InVT1.getFixedSizeInBits();
  uint64_t InVT2Size = InVT2.getFixedSizeInBits();

  assert(InVT2Size <= InVT1Size &&
         "Inputs must be sorted to be in non-increasing vector size order.");

  // We can't generate a shuffle node with mismatched input and output types.
  // Try to make the types match the type of the output.
  if (InVT1 != VT || InVT2 != VT) {
    if ((VTSize % InVT1Size == 0) && InVT1 == InVT2) {
      // If the output vector length is a multiple of both input lengths,
      // we can concatenate them and pad the rest with undefs.
      unsigned NumConcats = VTSize / InVT1Size;
      assert(NumConcats >= 2 && "Concat needs at least two inputs!");
      SmallVector<SDValue, 2> ConcatOps(NumConcats, DAG.getUNDEF(InVT1));
      ConcatOps[0] = VecIn1;
      ConcatOps[1] = VecIn2 ? VecIn2 : DAG.getUNDEF(InVT1);
      VecIn1 = DAG.getNode(ISD::CONCAT_VECTORS, DL, VT, ConcatOps);
      VecIn2 = SDValue();
    } else if (InVT1Size == VTSize * 2) {
      if (!TLI.isExtractSubvectorCheap(VT, InVT1, NumElems))
        return SDValue();

      if (!VecIn2.getNode()) {
        // If we only have one input vector, and it's twice the size of the
        // output, split it in two.
        VecIn2 = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, VT, VecIn1,
                             DAG.getVectorIdxConstant(NumElems, DL));
        VecIn1 = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, VT, VecIn1, ZeroIdx);
        // Since we now have shorter input vectors, adjust the offset of the
        // second vector's start.
        Vec2Offset = NumElems;
      } else {
        assert(InVT2Size <= InVT1Size &&
               "Second input is not going to be larger than the first one.");

        // VecIn1 is wider than the output, and we have another, possibly
        // smaller input. Pad the smaller input with undefs, shuffle at the
        // input vector width, and extract the output.
        // The shuffle type is different than VT, so check legality again.
        if (LegalOperations &&
            !TLI.isOperationLegal(ISD::VECTOR_SHUFFLE, InVT1))
          return SDValue();

        // Legalizing INSERT_SUBVECTOR is tricky - you basically have to
        // lower it back into a BUILD_VECTOR. So if the inserted type is
        // illegal, don't even try.
        if (InVT1 != InVT2) {
          if (!TLI.isTypeLegal(InVT2))
            return SDValue();
          VecIn2 = DAG.getNode(ISD::INSERT_SUBVECTOR, DL, InVT1,
                               DAG.getUNDEF(InVT1), VecIn2, ZeroIdx);
        }
        ShuffleNumElems = NumElems * 2;
      }
    } else if (InVT2Size * 2 == VTSize && InVT1Size == VTSize) {
      SmallVector<SDValue, 2> ConcatOps(2, DAG.getUNDEF(InVT2));
      ConcatOps[0] = VecIn2;
      VecIn2 = DAG.getNode(ISD::CONCAT_VECTORS, DL, VT, ConcatOps);
    } else if (InVT1Size / VTSize > 1 && InVT1Size % VTSize == 0) {
      if (!TLI.isExtractSubvectorCheap(VT, InVT1, NumElems) ||
          !TLI.isTypeLegal(InVT1) || !TLI.isTypeLegal(InVT2))
        return SDValue();
      // If dest vector has less than two elements, then use shuffle and extract
      // from larger regs will cost even more.
      if (VT.getVectorNumElements() <= 2 || !VecIn2.getNode())
        return SDValue();
      assert(InVT2Size <= InVT1Size &&
             "Second input is not going to be larger than the first one.");

      // VecIn1 is wider than the output, and we have another, possibly
      // smaller input. Pad the smaller input with undefs, shuffle at the
      // input vector width, and extract the output.
      // The shuffle type is different than VT, so check legality again.
      if (LegalOperations && !TLI.isOperationLegal(ISD::VECTOR_SHUFFLE, InVT1))
        return SDValue();

      if (InVT1 != InVT2) {
        VecIn2 = DAG.getNode(ISD::INSERT_SUBVECTOR, DL, InVT1,
                             DAG.getUNDEF(InVT1), VecIn2, ZeroIdx);
      }
      ShuffleNumElems = InVT1Size / VTSize * NumElems;
    } else {
      // TODO: Support cases where the length mismatch isn't exactly by a
      // factor of 2.
      // TODO: Move this check upwards, so that if we have bad type
      // mismatches, we don't create any DAG nodes.
      return SDValue();
    }
  }

  // Initialize mask to undef.
  SmallVector<int, 8> Mask(ShuffleNumElems, -1);

  // Only need to run up to the number of elements actually used, not the
  // total number of elements in the shuffle - if we are shuffling a wider
  // vector, the high lanes should be set to undef.
  for (unsigned i = 0; i != NumElems; ++i) {
    if (VectorMask[i] <= 0)
      continue;

    unsigned ExtIndex = N->getOperand(i).getConstantOperandVal(1);
    if (VectorMask[i] == (int)LeftIdx) {
      Mask[i] = ExtIndex;
    } else if (VectorMask[i] == (int)LeftIdx + 1) {
      Mask[i] = Vec2Offset + ExtIndex;
    }
  }

  // The type the input vectors may have changed above.
  InVT1 = VecIn1.getValueType();

  // If we already have a VecIn2, it should have the same type as VecIn1.
  // If we don't, get an undef/zero vector of the appropriate type.
  VecIn2 = VecIn2.getNode() ? VecIn2 : DAG.getUNDEF(InVT1);
  assert(InVT1 == VecIn2.getValueType() && "Unexpected second input type.");

  SDValue Shuffle = DAG.getVectorShuffle(InVT1, DL, VecIn1, VecIn2, Mask);
  if (ShuffleNumElems > NumElems)
    Shuffle = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, VT, Shuffle, ZeroIdx);

  return Shuffle;
}

static SDValue reduceBuildVecToShuffleWithZero(SDNode *BV, SelectionDAG &DAG) {
  assert(BV->getOpcode() == ISD::BUILD_VECTOR && "Expected build vector");

  // First, determine where the build vector is not undef.
  // TODO: We could extend this to handle zero elements as well as undefs.
  int NumBVOps = BV->getNumOperands();
  int ZextElt = -1;
  for (int i = 0; i != NumBVOps; ++i) {
    SDValue Op = BV->getOperand(i);
    if (Op.isUndef())
      continue;
    if (ZextElt == -1)
      ZextElt = i;
    else
      return SDValue();
  }
  // Bail out if there's no non-undef element.
  if (ZextElt == -1)
    return SDValue();

  // The build vector contains some number of undef elements and exactly
  // one other element. That other element must be a zero-extended scalar
  // extracted from a vector at a constant index to turn this into a shuffle.
  // Also, require that the build vector does not implicitly truncate/extend
  // its elements.
  // TODO: This could be enhanced to allow ANY_EXTEND as well as ZERO_EXTEND.
  EVT VT = BV->getValueType(0);
  SDValue Zext = BV->getOperand(ZextElt);
  if (Zext.getOpcode() != ISD::ZERO_EXTEND || !Zext.hasOneUse() ||
      Zext.getOperand(0).getOpcode() != ISD::EXTRACT_VECTOR_ELT ||
      !isa<ConstantSDNode>(Zext.getOperand(0).getOperand(1)) ||
      Zext.getValueSizeInBits() != VT.getScalarSizeInBits())
    return SDValue();

  // The zero-extend must be a multiple of the source size, and we must be
  // building a vector of the same size as the source of the extract element.
  SDValue Extract = Zext.getOperand(0);
  unsigned DestSize = Zext.getValueSizeInBits();
  unsigned SrcSize = Extract.getValueSizeInBits();
  if (DestSize % SrcSize != 0 ||
      Extract.getOperand(0).getValueSizeInBits() != VT.getSizeInBits())
    return SDValue();

  // Create a shuffle mask that will combine the extracted element with zeros
  // and undefs.
  int ZextRatio = DestSize / SrcSize;
  int NumMaskElts = NumBVOps * ZextRatio;
  SmallVector<int, 32> ShufMask(NumMaskElts, -1);
  for (int i = 0; i != NumMaskElts; ++i) {
    if (i / ZextRatio == ZextElt) {
      // The low bits of the (potentially translated) extracted element map to
      // the source vector. The high bits map to zero. We will use a zero vector
      // as the 2nd source operand of the shuffle, so use the 1st element of
      // that vector (mask value is number-of-elements) for the high bits.
      int Low = DAG.getDataLayout().isBigEndian() ? (ZextRatio - 1) : 0;
      ShufMask[i] = (i % ZextRatio == Low) ? Extract.getConstantOperandVal(1)
                                           : NumMaskElts;
    }

    // Undef elements of the build vector remain undef because we initialize
    // the shuffle mask with -1.
  }

  // buildvec undef, ..., (zext (extractelt V, IndexC)), undef... -->
  // bitcast (shuffle V, ZeroVec, VectorMask)
  SDLoc DL(BV);
  EVT VecVT = Extract.getOperand(0).getValueType();
  SDValue ZeroVec = DAG.getConstant(0, DL, VecVT);
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  SDValue Shuf = TLI.buildLegalVectorShuffle(VecVT, DL, Extract.getOperand(0),
                                             ZeroVec, ShufMask, DAG);
  if (!Shuf)
    return SDValue();
  return DAG.getBitcast(VT, Shuf);
}

// FIXME: promote to STLExtras.
template <typename R, typename T>
static auto getFirstIndexOf(R &&Range, const T &Val) {
  auto I = find(Range, Val);
  if (I == Range.end())
    return static_cast<decltype(std::distance(Range.begin(), I))>(-1);
  return std::distance(Range.begin(), I);
}

// Check to see if this is a BUILD_VECTOR of a bunch of EXTRACT_VECTOR_ELT
// operations. If the types of the vectors we're extracting from allow it,
// turn this into a vector_shuffle node.
SDValue DAGCombiner::reduceBuildVecToShuffle(SDNode *N) {
  SDLoc DL(N);
  EVT VT = N->getValueType(0);

  // Only type-legal BUILD_VECTOR nodes are converted to shuffle nodes.
  if (!isTypeLegal(VT))
    return SDValue();

  if (SDValue V = reduceBuildVecToShuffleWithZero(N, DAG))
    return V;

  // May only combine to shuffle after legalize if shuffle is legal.
  if (LegalOperations && !TLI.isOperationLegal(ISD::VECTOR_SHUFFLE, VT))
    return SDValue();

  bool UsesZeroVector = false;
  unsigned NumElems = N->getNumOperands();

  // Record, for each element of the newly built vector, which input vector
  // that element comes from. -1 stands for undef, 0 for the zero vector,
  // and positive values for the input vectors.
  // VectorMask maps each element to its vector number, and VecIn maps vector
  // numbers to their initial SDValues.

  SmallVector<int, 8> VectorMask(NumElems, -1);
  SmallVector<SDValue, 8> VecIn;
  VecIn.push_back(SDValue());

  for (unsigned i = 0; i != NumElems; ++i) {
    SDValue Op = N->getOperand(i);

    if (Op.isUndef())
      continue;

    // See if we can use a blend with a zero vector.
    // TODO: Should we generalize this to a blend with an arbitrary constant
    // vector?
    if (isNullConstant(Op) || isNullFPConstant(Op)) {
      UsesZeroVector = true;
      VectorMask[i] = 0;
      continue;
    }

    // Not an undef or zero. If the input is something other than an
    // EXTRACT_VECTOR_ELT with an in-range constant index, bail out.
    if (Op.getOpcode() != ISD::EXTRACT_VECTOR_ELT ||
        !isa<ConstantSDNode>(Op.getOperand(1)))
      return SDValue();
    SDValue ExtractedFromVec = Op.getOperand(0);

    if (ExtractedFromVec.getValueType().isScalableVector())
      return SDValue();

    const APInt &ExtractIdx = Op.getConstantOperandAPInt(1);
    if (ExtractIdx.uge(ExtractedFromVec.getValueType().getVectorNumElements()))
      return SDValue();

    // All inputs must have the same element type as the output.
    if (VT.getVectorElementType() !=
        ExtractedFromVec.getValueType().getVectorElementType())
      return SDValue();

    // Have we seen this input vector before?
    // The vectors are expected to be tiny (usually 1 or 2 elements), so using
    // a map back from SDValues to numbers isn't worth it.
    int Idx = getFirstIndexOf(VecIn, ExtractedFromVec);
    if (Idx == -1) { // A new source vector?
      Idx = VecIn.size();
      VecIn.push_back(ExtractedFromVec);
    }

    VectorMask[i] = Idx;
  }

  // If we didn't find at least one input vector, bail out.
  if (VecIn.size() < 2)
    return SDValue();

  // If all the Operands of BUILD_VECTOR extract from same
  // vector, then split the vector efficiently based on the maximum
  // vector access index and adjust the VectorMask and
  // VecIn accordingly.
  bool DidSplitVec = false;
  if (VecIn.size() == 2) {
    unsigned MaxIndex = 0;
    unsigned NearestPow2 = 0;
    SDValue Vec = VecIn.back();
    EVT InVT = Vec.getValueType();
    SmallVector<unsigned, 8> IndexVec(NumElems, 0);

    for (unsigned i = 0; i < NumElems; i++) {
      if (VectorMask[i] <= 0)
        continue;
      unsigned Index = N->getOperand(i).getConstantOperandVal(1);
      IndexVec[i] = Index;
      MaxIndex = std::max(MaxIndex, Index);
    }

    NearestPow2 = PowerOf2Ceil(MaxIndex);
    if (InVT.isSimple() && NearestPow2 > 2 && MaxIndex < NearestPow2 &&
        NumElems * 2 < NearestPow2) {
      unsigned SplitSize = NearestPow2 / 2;
      EVT SplitVT = EVT::getVectorVT(*DAG.getContext(),
                                     InVT.getVectorElementType(), SplitSize);
      if (TLI.isTypeLegal(SplitVT) &&
          SplitSize + SplitVT.getVectorNumElements() <=
              InVT.getVectorNumElements()) {
        SDValue VecIn2 = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, SplitVT, Vec,
                                     DAG.getVectorIdxConstant(SplitSize, DL));
        SDValue VecIn1 = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, SplitVT, Vec,
                                     DAG.getVectorIdxConstant(0, DL));
        VecIn.pop_back();
        VecIn.push_back(VecIn1);
        VecIn.push_back(VecIn2);
        DidSplitVec = true;

        for (unsigned i = 0; i < NumElems; i++) {
          if (VectorMask[i] <= 0)
            continue;
          VectorMask[i] = (IndexVec[i] < SplitSize) ? 1 : 2;
        }
      }
    }
  }

  // Sort input vectors by decreasing vector element count,
  // while preserving the relative order of equally-sized vectors.
  // Note that we keep the first "implicit zero vector as-is.
  SmallVector<SDValue, 8> SortedVecIn(VecIn);
  llvm::stable_sort(MutableArrayRef<SDValue>(SortedVecIn).drop_front(),
                    [](const SDValue &a, const SDValue &b) {
                      return a.getValueType().getVectorNumElements() >
                             b.getValueType().getVectorNumElements();
                    });

  // We now also need to rebuild the VectorMask, because it referenced element
  // order in VecIn, and we just sorted them.
  for (int &SourceVectorIndex : VectorMask) {
    if (SourceVectorIndex <= 0)
      continue;
    unsigned Idx = getFirstIndexOf(SortedVecIn, VecIn[SourceVectorIndex]);
    assert(Idx > 0 && Idx < SortedVecIn.size() &&
           VecIn[SourceVectorIndex] == SortedVecIn[Idx] && "Remapping failure");
    SourceVectorIndex = Idx;
  }

  VecIn = std::move(SortedVecIn);

  // TODO: Should this fire if some of the input vectors has illegal type (like
  // it does now), or should we let legalization run its course first?

  // Shuffle phase:
  // Take pairs of vectors, and shuffle them so that the result has elements
  // from these vectors in the correct places.
  // For example, given:
  // t10: i32 = extract_vector_elt t1, Constant:i64<0>
  // t11: i32 = extract_vector_elt t2, Constant:i64<0>
  // t12: i32 = extract_vector_elt t3, Constant:i64<0>
  // t13: i32 = extract_vector_elt t1, Constant:i64<1>
  // t14: v4i32 = BUILD_VECTOR t10, t11, t12, t13
  // We will generate:
  // t20: v4i32 = vector_shuffle<0,4,u,1> t1, t2
  // t21: v4i32 = vector_shuffle<u,u,0,u> t3, undef
  SmallVector<SDValue, 4> Shuffles;
  for (unsigned In = 0, Len = (VecIn.size() / 2); In < Len; ++In) {
    unsigned LeftIdx = 2 * In + 1;
    SDValue VecLeft = VecIn[LeftIdx];
    SDValue VecRight =
        (LeftIdx + 1) < VecIn.size() ? VecIn[LeftIdx + 1] : SDValue();

    if (SDValue Shuffle = createBuildVecShuffle(DL, N, VectorMask, VecLeft,
                                                VecRight, LeftIdx, DidSplitVec))
      Shuffles.push_back(Shuffle);
    else
      return SDValue();
  }

  // If we need the zero vector as an "ingredient" in the blend tree, add it
  // to the list of shuffles.
  if (UsesZeroVector)
    Shuffles.push_back(VT.isInteger() ? DAG.getConstant(0, DL, VT)
                                      : DAG.getConstantFP(0.0, DL, VT));

  // If we only have one shuffle, we're done.
  if (Shuffles.size() == 1)
    return Shuffles[0];

  // Update the vector mask to point to the post-shuffle vectors.
  for (int &Vec : VectorMask)
    if (Vec == 0)
      Vec = Shuffles.size() - 1;
    else
      Vec = (Vec - 1) / 2;

  // More than one shuffle. Generate a binary tree of blends, e.g. if from
  // the previous step we got the set of shuffles t10, t11, t12, t13, we will
  // generate:
  // t10: v8i32 = vector_shuffle<0,8,u,u,u,u,u,u> t1, t2
  // t11: v8i32 = vector_shuffle<u,u,0,8,u,u,u,u> t3, t4
  // t12: v8i32 = vector_shuffle<u,u,u,u,0,8,u,u> t5, t6
  // t13: v8i32 = vector_shuffle<u,u,u,u,u,u,0,8> t7, t8
  // t20: v8i32 = vector_shuffle<0,1,10,11,u,u,u,u> t10, t11
  // t21: v8i32 = vector_shuffle<u,u,u,u,4,5,14,15> t12, t13
  // t30: v8i32 = vector_shuffle<0,1,2,3,12,13,14,15> t20, t21

  // Make sure the initial size of the shuffle list is even.
  if (Shuffles.size() % 2)
    Shuffles.push_back(DAG.getUNDEF(VT));

  for (unsigned CurSize = Shuffles.size(); CurSize > 1; CurSize /= 2) {
    if (CurSize % 2) {
      Shuffles[CurSize] = DAG.getUNDEF(VT);
      CurSize++;
    }
    for (unsigned In = 0, Len = CurSize / 2; In < Len; ++In) {
      int Left = 2 * In;
      int Right = 2 * In + 1;
      SmallVector<int, 8> Mask(NumElems, -1);
      SDValue L = Shuffles[Left];
      ArrayRef<int> LMask;
      bool IsLeftShuffle = L.getOpcode() == ISD::VECTOR_SHUFFLE &&
                           L.use_empty() && L.getOperand(1).isUndef() &&
                           L.getOperand(0).getValueType() == L.getValueType();
      if (IsLeftShuffle) {
        LMask = cast<ShuffleVectorSDNode>(L.getNode())->getMask();
        L = L.getOperand(0);
      }
      SDValue R = Shuffles[Right];
      ArrayRef<int> RMask;
      bool IsRightShuffle = R.getOpcode() == ISD::VECTOR_SHUFFLE &&
                            R.use_empty() && R.getOperand(1).isUndef() &&
                            R.getOperand(0).getValueType() == R.getValueType();
      if (IsRightShuffle) {
        RMask = cast<ShuffleVectorSDNode>(R.getNode())->getMask();
        R = R.getOperand(0);
      }
      for (unsigned I = 0; I != NumElems; ++I) {
        if (VectorMask[I] == Left) {
          Mask[I] = I;
          if (IsLeftShuffle)
            Mask[I] = LMask[I];
          VectorMask[I] = In;
        } else if (VectorMask[I] == Right) {
          Mask[I] = I + NumElems;
          if (IsRightShuffle)
            Mask[I] = RMask[I] + NumElems;
          VectorMask[I] = In;
        }
      }

      Shuffles[In] = DAG.getVectorShuffle(VT, DL, L, R, Mask);
    }
  }
  return Shuffles[0];
}

// Try to turn a build vector of zero extends of extract vector elts into a
// a vector zero extend and possibly an extract subvector.
// TODO: Support sign extend?
// TODO: Allow undef elements?
SDValue DAGCombiner::convertBuildVecZextToZext(SDNode *N) {
  if (LegalOperations)
    return SDValue();

  EVT VT = N->getValueType(0);

  bool FoundZeroExtend = false;
  SDValue Op0 = N->getOperand(0);
  auto checkElem = [&](SDValue Op) -> int64_t {
    unsigned Opc = Op.getOpcode();
    FoundZeroExtend |= (Opc == ISD::ZERO_EXTEND);
    if ((Opc == ISD::ZERO_EXTEND || Opc == ISD::ANY_EXTEND) &&
        Op.getOperand(0).getOpcode() == ISD::EXTRACT_VECTOR_ELT &&
        Op0.getOperand(0).getOperand(0) == Op.getOperand(0).getOperand(0))
      if (auto *C = dyn_cast<ConstantSDNode>(Op.getOperand(0).getOperand(1)))
        return C->getZExtValue();
    return -1;
  };

  // Make sure the first element matches
  // (zext (extract_vector_elt X, C))
  // Offset must be a constant multiple of the
  // known-minimum vector length of the result type.
  int64_t Offset = checkElem(Op0);
  if (Offset < 0 || (Offset % VT.getVectorNumElements()) != 0)
    return SDValue();

  unsigned NumElems = N->getNumOperands();
  SDValue In = Op0.getOperand(0).getOperand(0);
  EVT InSVT = In.getValueType().getScalarType();
  EVT InVT = EVT::getVectorVT(*DAG.getContext(), InSVT, NumElems);

  // Don't create an illegal input type after type legalization.
  if (LegalTypes && !TLI.isTypeLegal(InVT))
    return SDValue();

  // Ensure all the elements come from the same vector and are adjacent.
  for (unsigned i = 1; i != NumElems; ++i) {
    if ((Offset + i) != checkElem(N->getOperand(i)))
      return SDValue();
  }

  SDLoc DL(N);
  In = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, InVT, In,
                   Op0.getOperand(0).getOperand(1));
  return DAG.getNode(FoundZeroExtend ? ISD::ZERO_EXTEND : ISD::ANY_EXTEND, DL,
                     VT, In);
}

// If this is a very simple BUILD_VECTOR with first element being a ZERO_EXTEND,
// and all other elements being constant zero's, granularize the BUILD_VECTOR's
// element width, absorbing the ZERO_EXTEND, turning it into a constant zero op.
// This patten can appear during legalization.
//
// NOTE: This can be generalized to allow more than a single
//       non-constant-zero op, UNDEF's, and to be KnownBits-based,
SDValue DAGCombiner::convertBuildVecZextToBuildVecWithZeros(SDNode *N) {
  // Don't run this after legalization. Targets may have other preferences.
  if (Level >= AfterLegalizeDAG)
    return SDValue();

  // FIXME: support big-endian.
  if (DAG.getDataLayout().isBigEndian())
    return SDValue();

  EVT VT = N->getValueType(0);
  EVT OpVT = N->getOperand(0).getValueType();
  assert(!VT.isScalableVector() && "Encountered scalable BUILD_VECTOR?");

  EVT OpIntVT = EVT::getIntegerVT(*DAG.getContext(), OpVT.getSizeInBits());

  if (!TLI.isTypeLegal(OpIntVT) ||
      (LegalOperations && !TLI.isOperationLegalOrCustom(ISD::BITCAST, OpIntVT)))
    return SDValue();

  unsigned EltBitwidth = VT.getScalarSizeInBits();
  // NOTE: the actual width of operands may be wider than that!

  // Analyze all operands of this BUILD_VECTOR. What is the largest number of
  // active bits they all have? We'll want to truncate them all to that width.
  unsigned ActiveBits = 0;
  APInt KnownZeroOps(VT.getVectorNumElements(), 0);
  for (auto I : enumerate(N->ops())) {
    SDValue Op = I.value();
    // FIXME: support UNDEF elements?
    if (auto *Cst = dyn_cast<ConstantSDNode>(Op)) {
      unsigned OpActiveBits =
          Cst->getAPIntValue().trunc(EltBitwidth).getActiveBits();
      if (OpActiveBits == 0) {
        KnownZeroOps.setBit(I.index());
        continue;
      }
      // Profitability check: don't allow non-zero constant operands.
      return SDValue();
    }
    // Profitability check: there must only be a single non-zero operand,
    // and it must be the first operand of the BUILD_VECTOR.
    if (I.index() != 0)
      return SDValue();
    // The operand must be a zero-extension itself.
    // FIXME: this could be generalized to known leading zeros check.
    if (Op.getOpcode() != ISD::ZERO_EXTEND)
      return SDValue();
    unsigned CurrActiveBits =
        Op.getOperand(0).getValueSizeInBits().getFixedValue();
    assert(!ActiveBits && "Already encountered non-constant-zero operand?");
    ActiveBits = CurrActiveBits;
    // We want to at least halve the element size.
    if (2 * ActiveBits > EltBitwidth)
      return SDValue();
  }

  // This BUILD_VECTOR must have at least one non-constant-zero operand.
  if (ActiveBits == 0)
    return SDValue();

  // We have EltBitwidth bits, the *minimal* chunk size is ActiveBits,
  // into how many chunks can we split our element width?
  EVT NewScalarIntVT, NewIntVT;
  std::optional<unsigned> Factor;
  // We can split the element into at least two chunks, but not into more
  // than |_ EltBitwidth / ActiveBits _| chunks. Find a largest split factor
  // for which the element width is a multiple of it,
  // and the resulting types/operations on that chunk width are legal.
  assert(2 * ActiveBits <= EltBitwidth &&
         "We know that half or less bits of the element are active.");
  for (unsigned Scale = EltBitwidth / ActiveBits; Scale >= 2; --Scale) {
    if (EltBitwidth % Scale != 0)
      continue;
    unsigned ChunkBitwidth = EltBitwidth / Scale;
    assert(ChunkBitwidth >= ActiveBits && "As per starting point.");
    NewScalarIntVT = EVT::getIntegerVT(*DAG.getContext(), ChunkBitwidth);
    NewIntVT = EVT::getVectorVT(*DAG.getContext(), NewScalarIntVT,
                                Scale * N->getNumOperands());
    if (!TLI.isTypeLegal(NewScalarIntVT) || !TLI.isTypeLegal(NewIntVT) ||
        (LegalOperations &&
         !(TLI.isOperationLegalOrCustom(ISD::TRUNCATE, NewScalarIntVT) &&
           TLI.isOperationLegalOrCustom(ISD::BUILD_VECTOR, NewIntVT))))
      continue;
    Factor = Scale;
    break;
  }
  if (!Factor)
    return SDValue();

  SDLoc DL(N);
  SDValue ZeroOp = DAG.getConstant(0, DL, NewScalarIntVT);

  // Recreate the BUILD_VECTOR, with elements now being Factor times smaller.
  SmallVector<SDValue, 16> NewOps;
  NewOps.reserve(NewIntVT.getVectorNumElements());
  for (auto I : enumerate(N->ops())) {
    SDValue Op = I.value();
    assert(!Op.isUndef() && "FIXME: after allowing UNDEF's, handle them here.");
    unsigned SrcOpIdx = I.index();
    if (KnownZeroOps[SrcOpIdx]) {
      NewOps.append(*Factor, ZeroOp);
      continue;
    }
    Op = DAG.getBitcast(OpIntVT, Op);
    Op = DAG.getNode(ISD::TRUNCATE, DL, NewScalarIntVT, Op);
    NewOps.emplace_back(Op);
    NewOps.append(*Factor - 1, ZeroOp);
  }
  assert(NewOps.size() == NewIntVT.getVectorNumElements());
  SDValue NewBV = DAG.getBuildVector(NewIntVT, DL, NewOps);
  NewBV = DAG.getBitcast(VT, NewBV);
  return NewBV;
}

SDValue DAGCombiner::visitBUILD_VECTOR(SDNode *N) {
  EVT VT = N->getValueType(0);

  // A vector built entirely of undefs is undef.
  if (ISD::allOperandsUndef(N))
    return DAG.getUNDEF(VT);

  // If this is a splat of a bitcast from another vector, change to a
  // concat_vector.
  // For example:
  //   (build_vector (i64 (bitcast (v2i32 X))), (i64 (bitcast (v2i32 X)))) ->
  //     (v2i64 (bitcast (concat_vectors (v2i32 X), (v2i32 X))))
  //
  // If X is a build_vector itself, the concat can become a larger build_vector.
  // TODO: Maybe this is useful for non-splat too?
  if (!LegalOperations) {
    SDValue Splat = cast<BuildVectorSDNode>(N)->getSplatValue();
    // Only change build_vector to a concat_vector if the splat value type is
    // same as the vector element type.
    if (Splat && Splat.getValueType() == VT.getVectorElementType()) {
      Splat = peekThroughBitcasts(Splat);
      EVT SrcVT = Splat.getValueType();
      if (SrcVT.isVector()) {
        unsigned NumElts = N->getNumOperands() * SrcVT.getVectorNumElements();
        EVT NewVT = EVT::getVectorVT(*DAG.getContext(),
                                     SrcVT.getVectorElementType(), NumElts);
        if (!LegalTypes || TLI.isTypeLegal(NewVT)) {
          SmallVector<SDValue, 8> Ops(N->getNumOperands(), Splat);
          SDValue Concat =
              DAG.getNode(ISD::CONCAT_VECTORS, SDLoc(N), NewVT, Ops);
          return DAG.getBitcast(VT, Concat);
        }
      }
    }
  }

  // Check if we can express BUILD VECTOR via subvector extract.
  if (!LegalTypes && (N->getNumOperands() > 1)) {
    SDValue Op0 = N->getOperand(0);
    auto checkElem = [&](SDValue Op) -> uint64_t {
      if ((Op.getOpcode() == ISD::EXTRACT_VECTOR_ELT) &&
          (Op0.getOperand(0) == Op.getOperand(0)))
        if (auto CNode = dyn_cast<ConstantSDNode>(Op.getOperand(1)))
          return CNode->getZExtValue();
      return -1;
    };

    int Offset = checkElem(Op0);
    for (unsigned i = 0; i < N->getNumOperands(); ++i) {
      if (Offset + i != checkElem(N->getOperand(i))) {
        Offset = -1;
        break;
      }
    }

    if ((Offset == 0) &&
        (Op0.getOperand(0).getValueType() == N->getValueType(0)))
      return Op0.getOperand(0);
    if ((Offset != -1) &&
        ((Offset % N->getValueType(0).getVectorNumElements()) ==
         0)) // IDX must be multiple of output size.
      return DAG.getNode(ISD::EXTRACT_SUBVECTOR, SDLoc(N), N->getValueType(0),
                         Op0.getOperand(0), Op0.getOperand(1));
  }

  if (SDValue V = convertBuildVecZextToZext(N))
    return V;

  if (SDValue V = convertBuildVecZextToBuildVecWithZeros(N))
    return V;

  if (SDValue V = reduceBuildVecExtToExtBuildVec(N))
    return V;

  if (SDValue V = reduceBuildVecTruncToBitCast(N))
    return V;

  if (SDValue V = reduceBuildVecToShuffle(N))
    return V;

  // A splat of a single element is a SPLAT_VECTOR if supported on the target.
  // Do this late as some of the above may replace the splat.
  if (TLI.getOperationAction(ISD::SPLAT_VECTOR, VT) != TargetLowering::Expand)
    if (SDValue V = cast<BuildVectorSDNode>(N)->getSplatValue()) {
      assert(!V.isUndef() && "Splat of undef should have been handled earlier");
      return DAG.getNode(ISD::SPLAT_VECTOR, SDLoc(N), VT, V);
    }

  return SDValue();
}

static SDValue combineConcatVectorOfScalars(SDNode *N, SelectionDAG &DAG) {
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  EVT OpVT = N->getOperand(0).getValueType();

  // If the operands are legal vectors, leave them alone.
  if (TLI.isTypeLegal(OpVT) || OpVT.isScalableVector())
    return SDValue();

  SDLoc DL(N);
  EVT VT = N->getValueType(0);
  SmallVector<SDValue, 8> Ops;
  EVT SVT = EVT::getIntegerVT(*DAG.getContext(), OpVT.getSizeInBits());

  // Keep track of what we encounter.
  bool AnyInteger = false;
  bool AnyFP = false;
  for (const SDValue &Op : N->ops()) {
    if (ISD::BITCAST == Op.getOpcode() &&
        !Op.getOperand(0).getValueType().isVector())
      Ops.push_back(Op.getOperand(0));
    else if (ISD::UNDEF == Op.getOpcode())
      Ops.push_back(DAG.getNode(ISD::UNDEF, DL, SVT));
    else
      return SDValue();

    // Note whether we encounter an integer or floating point scalar.
    // If it's neither, bail out, it could be something weird like x86mmx.
    EVT LastOpVT = Ops.back().getValueType();
    if (LastOpVT.isFloatingPoint())
      AnyFP = true;
    else if (LastOpVT.isInteger())
      AnyInteger = true;
    else
      return SDValue();
  }

  // If any of the operands is a floating point scalar bitcast to a vector,
  // use floating point types throughout, and bitcast everything.
  // Replace UNDEFs by another scalar UNDEF node, of the final desired type.
  if (AnyFP) {
    SVT = EVT::getFloatingPointVT(OpVT.getSizeInBits());
    if (AnyInteger) {
      for (SDValue &Op : Ops) {
        if (Op.getValueType() == SVT)
          continue;
        if (Op.isUndef())
          Op = DAG.getNode(ISD::UNDEF, DL, SVT);
        else
          Op = DAG.getBitcast(SVT, Op);
      }
    }
  }

  EVT VecVT = EVT::getVectorVT(*DAG.getContext(), SVT,
                               VT.getSizeInBits() / SVT.getSizeInBits());
  return DAG.getBitcast(VT, DAG.getBuildVector(VecVT, DL, Ops));
}

// Attempt to merge nested concat_vectors/undefs.
// Fold concat_vectors(concat_vectors(x,y,z,w),u,u,concat_vectors(a,b,c,d))
//  --> concat_vectors(x,y,z,w,u,u,u,u,u,u,u,u,a,b,c,d)
static SDValue combineConcatVectorOfConcatVectors(SDNode *N,
                                                  SelectionDAG &DAG) {
  EVT VT = N->getValueType(0);

  // Ensure we're concatenating UNDEF and CONCAT_VECTORS nodes of similar types.
  EVT SubVT;
  SDValue FirstConcat;
  for (const SDValue &Op : N->ops()) {
    if (Op.isUndef())
      continue;
    if (Op.getOpcode() != ISD::CONCAT_VECTORS)
      return SDValue();
    if (!FirstConcat) {
      SubVT = Op.getOperand(0).getValueType();
      if (!DAG.getTargetLoweringInfo().isTypeLegal(SubVT))
        return SDValue();
      FirstConcat = Op;
      continue;
    }
    if (SubVT != Op.getOperand(0).getValueType())
      return SDValue();
  }
  assert(FirstConcat && "Concat of all-undefs found");

  SmallVector<SDValue> ConcatOps;
  for (const SDValue &Op : N->ops()) {
    if (Op.isUndef()) {
      ConcatOps.append(FirstConcat->getNumOperands(), DAG.getUNDEF(SubVT));
      continue;
    }
    ConcatOps.append(Op->op_begin(), Op->op_end());
  }
  return DAG.getNode(ISD::CONCAT_VECTORS, SDLoc(N), VT, ConcatOps);
}

// Check to see if this is a CONCAT_VECTORS of a bunch of EXTRACT_SUBVECTOR
// operations. If so, and if the EXTRACT_SUBVECTOR vector inputs come from at
// most two distinct vectors the same size as the result, attempt to turn this
// into a legal shuffle.
static SDValue combineConcatVectorOfExtracts(SDNode *N, SelectionDAG &DAG) {
  EVT VT = N->getValueType(0);
  EVT OpVT = N->getOperand(0).getValueType();

  // We currently can't generate an appropriate shuffle for a scalable vector.
  if (VT.isScalableVector())
    return SDValue();

  int NumElts = VT.getVectorNumElements();
  int NumOpElts = OpVT.getVectorNumElements();

  SDValue SV0 = DAG.getUNDEF(VT), SV1 = DAG.getUNDEF(VT);
  SmallVector<int, 8> Mask;

  for (SDValue Op : N->ops()) {
    Op = peekThroughBitcasts(Op);

    // UNDEF nodes convert to UNDEF shuffle mask values.
    if (Op.isUndef()) {
      Mask.append((unsigned)NumOpElts, -1);
      continue;
    }

    if (Op.getOpcode() != ISD::EXTRACT_SUBVECTOR)
      return SDValue();

    // What vector are we extracting the subvector from and at what index?
    SDValue ExtVec = Op.getOperand(0);
    int ExtIdx = Op.getConstantOperandVal(1);

    // We want the EVT of the original extraction to correctly scale the
    // extraction index.
    EVT ExtVT = ExtVec.getValueType();
    ExtVec = peekThroughBitcasts(ExtVec);

    // UNDEF nodes convert to UNDEF shuffle mask values.
    if (ExtVec.isUndef()) {
      Mask.append((unsigned)NumOpElts, -1);
      continue;
    }

    // Ensure that we are extracting a subvector from a vector the same
    // size as the result.
    if (ExtVT.getSizeInBits() != VT.getSizeInBits())
      return SDValue();

    // Scale the subvector index to account for any bitcast.
    int NumExtElts = ExtVT.getVectorNumElements();
    if (0 == (NumExtElts % NumElts))
      ExtIdx /= (NumExtElts / NumElts);
    else if (0 == (NumElts % NumExtElts))
      ExtIdx *= (NumElts / NumExtElts);
    else
      return SDValue();

    // At most we can reference 2 inputs in the final shuffle.
    if (SV0.isUndef() || SV0 == ExtVec) {
      SV0 = ExtVec;
      for (int i = 0; i != NumOpElts; ++i)
        Mask.push_back(i + ExtIdx);
    } else if (SV1.isUndef() || SV1 == ExtVec) {
      SV1 = ExtVec;
      for (int i = 0; i != NumOpElts; ++i)
        Mask.push_back(i + ExtIdx + NumElts);
    } else {
      return SDValue();
    }
  }

  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  return TLI.buildLegalVectorShuffle(VT, SDLoc(N), DAG.getBitcast(VT, SV0),
                                     DAG.getBitcast(VT, SV1), Mask, DAG);
}

static SDValue combineConcatVectorOfCasts(SDNode *N, SelectionDAG &DAG) {
  unsigned CastOpcode = N->getOperand(0).getOpcode();
  switch (CastOpcode) {
  case ISD::SINT_TO_FP:
  case ISD::UINT_TO_FP:
  case ISD::FP_TO_SINT:
  case ISD::FP_TO_UINT:
    // TODO: Allow more opcodes?
    //  case ISD::BITCAST:
    //  case ISD::TRUNCATE:
    //  case ISD::ZERO_EXTEND:
    //  case ISD::SIGN_EXTEND:
    //  case ISD::FP_EXTEND:
    break;
  default:
    return SDValue();
  }

  EVT SrcVT = N->getOperand(0).getOperand(0).getValueType();
  if (!SrcVT.isVector())
    return SDValue();

  // All operands of the concat must be the same kind of cast from the same
  // source type.
  SmallVector<SDValue, 4> SrcOps;
  for (SDValue Op : N->ops()) {
    if (Op.getOpcode() != CastOpcode || !Op.hasOneUse() ||
        Op.getOperand(0).getValueType() != SrcVT)
      return SDValue();
    SrcOps.push_back(Op.getOperand(0));
  }

  // The wider cast must be supported by the target. This is unusual because
  // the operation support type parameter depends on the opcode. In addition,
  // check the other type in the cast to make sure this is really legal.
  EVT VT = N->getValueType(0);
  EVT SrcEltVT = SrcVT.getVectorElementType();
  ElementCount NumElts = SrcVT.getVectorElementCount() * N->getNumOperands();
  EVT ConcatSrcVT = EVT::getVectorVT(*DAG.getContext(), SrcEltVT, NumElts);
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  switch (CastOpcode) {
  case ISD::SINT_TO_FP:
  case ISD::UINT_TO_FP:
    if (!TLI.isOperationLegalOrCustom(CastOpcode, ConcatSrcVT) ||
        !TLI.isTypeLegal(VT))
      return SDValue();
    break;
  case ISD::FP_TO_SINT:
  case ISD::FP_TO_UINT:
    if (!TLI.isOperationLegalOrCustom(CastOpcode, VT) ||
        !TLI.isTypeLegal(ConcatSrcVT))
      return SDValue();
    break;
  default:
    llvm_unreachable("Unexpected cast opcode");
  }

  // concat (cast X), (cast Y)... -> cast (concat X, Y...)
  SDLoc DL(N);
  SDValue NewConcat = DAG.getNode(ISD::CONCAT_VECTORS, DL, ConcatSrcVT, SrcOps);
  return DAG.getNode(CastOpcode, DL, VT, NewConcat);
}

// See if this is a simple CONCAT_VECTORS with no UNDEF operands, and if one of
// the operands is a SHUFFLE_VECTOR, and all other operands are also operands
// to that SHUFFLE_VECTOR, create wider SHUFFLE_VECTOR.
static SDValue combineConcatVectorOfShuffleAndItsOperands(
    SDNode *N, SelectionDAG &DAG, const TargetLowering &TLI, bool LegalTypes,
    bool LegalOperations) {
  EVT VT = N->getValueType(0);
  EVT OpVT = N->getOperand(0).getValueType();
  if (VT.isScalableVector())
    return SDValue();

  // For now, only allow simple 2-operand concatenations.
  if (N->getNumOperands() != 2)
    return SDValue();

  // Don't create illegal types/shuffles when not allowed to.
  if ((LegalTypes && !TLI.isTypeLegal(VT)) ||
      (LegalOperations &&
       !TLI.isOperationLegalOrCustom(ISD::VECTOR_SHUFFLE, VT)))
    return SDValue();

  // Analyze all of the operands of the CONCAT_VECTORS. Out of all of them,
  // we want to find one that is: (1) a SHUFFLE_VECTOR (2) only used by us,
  // and (3) all operands of CONCAT_VECTORS must be either that SHUFFLE_VECTOR,
  // or one of the operands of that SHUFFLE_VECTOR (but not UNDEF!).
  // (4) and for now, the SHUFFLE_VECTOR must be unary.
  ShuffleVectorSDNode *SVN = nullptr;
  for (SDValue Op : N->ops()) {
    if (auto *CurSVN = dyn_cast<ShuffleVectorSDNode>(Op);
        CurSVN && CurSVN->getOperand(1).isUndef() && N->isOnlyUserOf(CurSVN) &&
        all_of(N->ops(), [CurSVN](SDValue Op) {
          // FIXME: can we allow UNDEF operands?
          return !Op.isUndef() &&
                 (Op.getNode() == CurSVN || is_contained(CurSVN->ops(), Op));
        })) {
      SVN = CurSVN;
      break;
    }
  }
  if (!SVN)
    return SDValue();

  // We are going to pad the shuffle operands, so any indice, that was picking
  // from the second operand, must be adjusted.
  SmallVector<int, 16> AdjustedMask;
  AdjustedMask.reserve(SVN->getMask().size());
  assert(SVN->getOperand(1).isUndef() && "Expected unary shuffle!");
  append_range(AdjustedMask, SVN->getMask());

  // Identity masks for the operands of the (padded) shuffle.
  SmallVector<int, 32> IdentityMask(2 * OpVT.getVectorNumElements());
  MutableArrayRef<int> FirstShufOpIdentityMask =
      MutableArrayRef<int>(IdentityMask)
          .take_front(OpVT.getVectorNumElements());
  MutableArrayRef<int> SecondShufOpIdentityMask =
      MutableArrayRef<int>(IdentityMask).take_back(OpVT.getVectorNumElements());
  std::iota(FirstShufOpIdentityMask.begin(), FirstShufOpIdentityMask.end(), 0);
  std::iota(SecondShufOpIdentityMask.begin(), SecondShufOpIdentityMask.end(),
            VT.getVectorNumElements());

  // New combined shuffle mask.
  SmallVector<int, 32> Mask;
  Mask.reserve(VT.getVectorNumElements());
  for (SDValue Op : N->ops()) {
    assert(!Op.isUndef() && "Not expecting to concatenate UNDEF.");
    if (Op.getNode() == SVN) {
      append_range(Mask, AdjustedMask);
      continue;
    }
    if (Op == SVN->getOperand(0)) {
      append_range(Mask, FirstShufOpIdentityMask);
      continue;
    }
    if (Op == SVN->getOperand(1)) {
      append_range(Mask, SecondShufOpIdentityMask);
      continue;
    }
    llvm_unreachable("Unexpected operand!");
  }

  // Don't create illegal shuffle masks.
  if (!TLI.isShuffleMaskLegal(Mask, VT))
    return SDValue();

  // Pad the shuffle operands with UNDEF.
  SDLoc dl(N);
  std::array<SDValue, 2> ShufOps;
  for (auto I : zip(SVN->ops(), ShufOps)) {
    SDValue ShufOp = std::get<0>(I);
    SDValue &NewShufOp = std::get<1>(I);
    if (ShufOp.isUndef())
      NewShufOp = DAG.getUNDEF(VT);
    else {
      SmallVector<SDValue, 2> ShufOpParts(N->getNumOperands(),
                                          DAG.getUNDEF(OpVT));
      ShufOpParts[0] = ShufOp;
      NewShufOp = DAG.getNode(ISD::CONCAT_VECTORS, dl, VT, ShufOpParts);
    }
  }
  // Finally, create the new wide shuffle.
  return DAG.getVectorShuffle(VT, dl, ShufOps[0], ShufOps[1], Mask);
}

SDValue DAGCombiner::visitCONCAT_VECTORS(SDNode *N) {
  // If we only have one input vector, we don't need to do any concatenation.
  if (N->getNumOperands() == 1)
    return N->getOperand(0);

  // Check if all of the operands are undefs.
  EVT VT = N->getValueType(0);
  if (ISD::allOperandsUndef(N))
    return DAG.getUNDEF(VT);

  // Optimize concat_vectors where all but the first of the vectors are undef.
  if (all_of(drop_begin(N->ops()),
             [](const SDValue &Op) { return Op.isUndef(); })) {
    SDValue In = N->getOperand(0);
    assert(In.getValueType().isVector() && "Must concat vectors");

    // If the input is a concat_vectors, just make a larger concat by padding
    // with smaller undefs.
    //
    // Legalizing in AArch64TargetLowering::LowerCONCAT_VECTORS() and combining
    // here could cause an infinite loop. That legalizing happens when LegalDAG
    // is true and input of AArch64TargetLowering::LowerCONCAT_VECTORS() is
    // scalable.
    if (In.getOpcode() == ISD::CONCAT_VECTORS && In.hasOneUse() &&
        !(LegalDAG && In.getValueType().isScalableVector())) {
      unsigned NumOps = N->getNumOperands() * In.getNumOperands();
      SmallVector<SDValue, 4> Ops(In->ops());
      Ops.resize(NumOps, DAG.getUNDEF(Ops[0].getValueType()));
      return DAG.getNode(ISD::CONCAT_VECTORS, SDLoc(N), VT, Ops);
    }

    SDValue Scalar = peekThroughOneUseBitcasts(In);

    // concat_vectors(scalar_to_vector(scalar), undef) ->
    //     scalar_to_vector(scalar)
    if (!LegalOperations && Scalar.getOpcode() == ISD::SCALAR_TO_VECTOR &&
         Scalar.hasOneUse()) {
      EVT SVT = Scalar.getValueType().getVectorElementType();
      if (SVT == Scalar.getOperand(0).getValueType())
        Scalar = Scalar.getOperand(0);
    }

    // concat_vectors(scalar, undef) -> scalar_to_vector(scalar)
    if (!Scalar.getValueType().isVector() && In.hasOneUse()) {
      // If the bitcast type isn't legal, it might be a trunc of a legal type;
      // look through the trunc so we can still do the transform:
      //   concat_vectors(trunc(scalar), undef) -> scalar_to_vector(scalar)
      if (Scalar->getOpcode() == ISD::TRUNCATE &&
          !TLI.isTypeLegal(Scalar.getValueType()) &&
          TLI.isTypeLegal(Scalar->getOperand(0).getValueType()))
        Scalar = Scalar->getOperand(0);

      EVT SclTy = Scalar.getValueType();

      if (!SclTy.isFloatingPoint() && !SclTy.isInteger())
        return SDValue();

      // Bail out if the vector size is not a multiple of the scalar size.
      if (VT.getSizeInBits() % SclTy.getSizeInBits())
        return SDValue();

      unsigned VNTNumElms = VT.getSizeInBits() / SclTy.getSizeInBits();
      if (VNTNumElms < 2)
        return SDValue();

      EVT NVT = EVT::getVectorVT(*DAG.getContext(), SclTy, VNTNumElms);
      if (!TLI.isTypeLegal(NVT) || !TLI.isTypeLegal(Scalar.getValueType()))
        return SDValue();

      SDValue Res = DAG.getNode(ISD::SCALAR_TO_VECTOR, SDLoc(N), NVT, Scalar);
      return DAG.getBitcast(VT, Res);
    }
  }

  // Fold any combination of BUILD_VECTOR or UNDEF nodes into one BUILD_VECTOR.
  // We have already tested above for an UNDEF only concatenation.
  // fold (concat_vectors (BUILD_VECTOR A, B, ...), (BUILD_VECTOR C, D, ...))
  // -> (BUILD_VECTOR A, B, ..., C, D, ...)
  auto IsBuildVectorOrUndef = [](const SDValue &Op) {
    return ISD::UNDEF == Op.getOpcode() || ISD::BUILD_VECTOR == Op.getOpcode();
  };
  if (llvm::all_of(N->ops(), IsBuildVectorOrUndef)) {
    SmallVector<SDValue, 8> Opnds;
    EVT SVT = VT.getScalarType();

    EVT MinVT = SVT;
    if (!SVT.isFloatingPoint()) {
      // If BUILD_VECTOR are from built from integer, they may have different
      // operand types. Get the smallest type and truncate all operands to it.
      bool FoundMinVT = false;
      for (const SDValue &Op : N->ops())
        if (ISD::BUILD_VECTOR == Op.getOpcode()) {
          EVT OpSVT = Op.getOperand(0).getValueType();
          MinVT = (!FoundMinVT || OpSVT.bitsLE(MinVT)) ? OpSVT : MinVT;
          FoundMinVT = true;
        }
      assert(FoundMinVT && "Concat vector type mismatch");
    }

    for (const SDValue &Op : N->ops()) {
      EVT OpVT = Op.getValueType();
      unsigned NumElts = OpVT.getVectorNumElements();

      if (ISD::UNDEF == Op.getOpcode())
        Opnds.append(NumElts, DAG.getUNDEF(MinVT));

      if (ISD::BUILD_VECTOR == Op.getOpcode()) {
        if (SVT.isFloatingPoint()) {
          assert(SVT == OpVT.getScalarType() && "Concat vector type mismatch");
          Opnds.append(Op->op_begin(), Op->op_begin() + NumElts);
        } else {
          for (unsigned i = 0; i != NumElts; ++i)
            Opnds.push_back(
                DAG.getNode(ISD::TRUNCATE, SDLoc(N), MinVT, Op.getOperand(i)));
        }
      }
    }

    assert(VT.getVectorNumElements() == Opnds.size() &&
           "Concat vector type mismatch");
    return DAG.getBuildVector(VT, SDLoc(N), Opnds);
  }

  // Fold CONCAT_VECTORS of only bitcast scalars (or undef) to BUILD_VECTOR.
  // FIXME: Add support for concat_vectors(bitcast(vec0),bitcast(vec1),...).
  if (SDValue V = combineConcatVectorOfScalars(N, DAG))
    return V;

  if (Level < AfterLegalizeVectorOps && TLI.isTypeLegal(VT)) {
    // Fold CONCAT_VECTORS of CONCAT_VECTORS (or undef) to VECTOR_SHUFFLE.
    if (SDValue V = combineConcatVectorOfConcatVectors(N, DAG))
      return V;

    // Fold CONCAT_VECTORS of EXTRACT_SUBVECTOR (or undef) to VECTOR_SHUFFLE.
    if (SDValue V = combineConcatVectorOfExtracts(N, DAG))
      return V;
  }

  if (SDValue V = combineConcatVectorOfCasts(N, DAG))
    return V;

  if (SDValue V = combineConcatVectorOfShuffleAndItsOperands(
          N, DAG, TLI, LegalTypes, LegalOperations))
    return V;

  // Type legalization of vectors and DAG canonicalization of SHUFFLE_VECTOR
  // nodes often generate nop CONCAT_VECTOR nodes. Scan the CONCAT_VECTOR
  // operands and look for a CONCAT operations that place the incoming vectors
  // at the exact same location.
  //
  // For scalable vectors, EXTRACT_SUBVECTOR indexes are implicitly scaled.
  SDValue SingleSource = SDValue();
  unsigned PartNumElem =
      N->getOperand(0).getValueType().getVectorMinNumElements();

  for (unsigned i = 0, e = N->getNumOperands(); i != e; ++i) {
    SDValue Op = N->getOperand(i);

    if (Op.isUndef())
      continue;

    // Check if this is the identity extract:
    if (Op.getOpcode() != ISD::EXTRACT_SUBVECTOR)
      return SDValue();

    // Find the single incoming vector for the extract_subvector.
    if (SingleSource.getNode()) {
      if (Op.getOperand(0) != SingleSource)
        return SDValue();
    } else {
      SingleSource = Op.getOperand(0);

      // Check the source type is the same as the type of the result.
      // If not, this concat may extend the vector, so we can not
      // optimize it away.
      if (SingleSource.getValueType() != N->getValueType(0))
        return SDValue();
    }

    // Check that we are reading from the identity index.
    unsigned IdentityIndex = i * PartNumElem;
    if (Op.getConstantOperandAPInt(1) != IdentityIndex)
      return SDValue();
  }

  if (SingleSource.getNode())
    return SingleSource;

  return SDValue();
}

// Helper that peeks through INSERT_SUBVECTOR/CONCAT_VECTORS to find
// if the subvector can be sourced for free.
static SDValue getSubVectorSrc(SDValue V, SDValue Index, EVT SubVT) {
  if (V.getOpcode() == ISD::INSERT_SUBVECTOR &&
      V.getOperand(1).getValueType() == SubVT && V.getOperand(2) == Index) {
    return V.getOperand(1);
  }
  auto *IndexC = dyn_cast<ConstantSDNode>(Index);
  if (IndexC && V.getOpcode() == ISD::CONCAT_VECTORS &&
      V.getOperand(0).getValueType() == SubVT &&
      (IndexC->getZExtValue() % SubVT.getVectorMinNumElements()) == 0) {
    uint64_t SubIdx = IndexC->getZExtValue() / SubVT.getVectorMinNumElements();
    return V.getOperand(SubIdx);
  }
  return SDValue();
}

static SDValue narrowInsertExtractVectorBinOp(SDNode *Extract,
                                              SelectionDAG &DAG,
                                              bool LegalOperations) {
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  SDValue BinOp = Extract->getOperand(0);
  unsigned BinOpcode = BinOp.getOpcode();
  if (!TLI.isBinOp(BinOpcode) || BinOp->getNumValues() != 1)
    return SDValue();

  EVT VecVT = BinOp.getValueType();
  SDValue Bop0 = BinOp.getOperand(0), Bop1 = BinOp.getOperand(1);
  if (VecVT != Bop0.getValueType() || VecVT != Bop1.getValueType())
    return SDValue();

  SDValue Index = Extract->getOperand(1);
  EVT SubVT = Extract->getValueType(0);
  if (!TLI.isOperationLegalOrCustom(BinOpcode, SubVT, LegalOperations))
    return SDValue();

  SDValue Sub0 = getSubVectorSrc(Bop0, Index, SubVT);
  SDValue Sub1 = getSubVectorSrc(Bop1, Index, SubVT);

  // TODO: We could handle the case where only 1 operand is being inserted by
  //       creating an extract of the other operand, but that requires checking
  //       number of uses and/or costs.
  if (!Sub0 || !Sub1)
    return SDValue();

  // We are inserting both operands of the wide binop only to extract back
  // to the narrow vector size. Eliminate all of the insert/extract:
  // ext (binop (ins ?, X, Index), (ins ?, Y, Index)), Index --> binop X, Y
  return DAG.getNode(BinOpcode, SDLoc(Extract), SubVT, Sub0, Sub1,
                     BinOp->getFlags());
}

/// If we are extracting a subvector produced by a wide binary operator try
/// to use a narrow binary operator and/or avoid concatenation and extraction.
static SDValue narrowExtractedVectorBinOp(SDNode *Extract, SelectionDAG &DAG,
                                          bool LegalOperations) {
  // TODO: Refactor with the caller (visitEXTRACT_SUBVECTOR), so we can share
  // some of these bailouts with other transforms.

  if (SDValue V = narrowInsertExtractVectorBinOp(Extract, DAG, LegalOperations))
    return V;

  // The extract index must be a constant, so we can map it to a concat operand.
  auto *ExtractIndexC = dyn_cast<ConstantSDNode>(Extract->getOperand(1));
  if (!ExtractIndexC)
    return SDValue();

  // We are looking for an optionally bitcasted wide vector binary operator
  // feeding an extract subvector.
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  SDValue BinOp = peekThroughBitcasts(Extract->getOperand(0));
  unsigned BOpcode = BinOp.getOpcode();
  if (!TLI.isBinOp(BOpcode) || BinOp->getNumValues() != 1)
    return SDValue();

  // Exclude the fake form of fneg (fsub -0.0, x) because that is likely to be
  // reduced to the unary fneg when it is visited, and we probably want to deal
  // with fneg in a target-specific way.
  if (BOpcode == ISD::FSUB) {
    auto *C = isConstOrConstSplatFP(BinOp.getOperand(0), /*AllowUndefs*/ true);
    if (C && C->getValueAPF().isNegZero())
      return SDValue();
  }

  // The binop must be a vector type, so we can extract some fraction of it.
  EVT WideBVT = BinOp.getValueType();
  // The optimisations below currently assume we are dealing with fixed length
  // vectors. It is possible to add support for scalable vectors, but at the
  // moment we've done no analysis to prove whether they are profitable or not.
  if (!WideBVT.isFixedLengthVector())
    return SDValue();

  EVT VT = Extract->getValueType(0);
  unsigned ExtractIndex = ExtractIndexC->getZExtValue();
  assert(ExtractIndex % VT.getVectorNumElements() == 0 &&
         "Extract index is not a multiple of the vector length.");

  // Bail out if this is not a proper multiple width extraction.
  unsigned WideWidth = WideBVT.getSizeInBits();
  unsigned NarrowWidth = VT.getSizeInBits();
  if (WideWidth % NarrowWidth != 0)
    return SDValue();

  // Bail out if we are extracting a fraction of a single operation. This can
  // occur because we potentially looked through a bitcast of the binop.
  unsigned NarrowingRatio = WideWidth / NarrowWidth;
  unsigned WideNumElts = WideBVT.getVectorNumElements();
  if (WideNumElts % NarrowingRatio != 0)
    return SDValue();

  // Bail out if the target does not support a narrower version of the binop.
  EVT NarrowBVT = EVT::getVectorVT(*DAG.getContext(), WideBVT.getScalarType(),
                                   WideNumElts / NarrowingRatio);
  if (!TLI.isOperationLegalOrCustomOrPromote(BOpcode, NarrowBVT,
                                             LegalOperations))
    return SDValue();

  // If extraction is cheap, we don't need to look at the binop operands
  // for concat ops. The narrow binop alone makes this transform profitable.
  // We can't just reuse the original extract index operand because we may have
  // bitcasted.
  unsigned ConcatOpNum = ExtractIndex / VT.getVectorNumElements();
  unsigned ExtBOIdx = ConcatOpNum * NarrowBVT.getVectorNumElements();
  if (TLI.isExtractSubvectorCheap(NarrowBVT, WideBVT, ExtBOIdx) &&
      BinOp.hasOneUse() && Extract->getOperand(0)->hasOneUse()) {
    // extract (binop B0, B1), N --> binop (extract B0, N), (extract B1, N)
    SDLoc DL(Extract);
    SDValue NewExtIndex = DAG.getVectorIdxConstant(ExtBOIdx, DL);
    SDValue X = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, NarrowBVT,
                            BinOp.getOperand(0), NewExtIndex);
    SDValue Y = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, NarrowBVT,
                            BinOp.getOperand(1), NewExtIndex);
    SDValue NarrowBinOp =
        DAG.getNode(BOpcode, DL, NarrowBVT, X, Y, BinOp->getFlags());
    return DAG.getBitcast(VT, NarrowBinOp);
  }

  // Only handle the case where we are doubling and then halving. A larger ratio
  // may require more than two narrow binops to replace the wide binop.
  if (NarrowingRatio != 2)
    return SDValue();

  // TODO: The motivating case for this transform is an x86 AVX1 target. That
  // target has temptingly almost legal versions of bitwise logic ops in 256-bit
  // flavors, but no other 256-bit integer support. This could be extended to
  // handle any binop, but that may require fixing/adding other folds to avoid
  // codegen regressions.
  if (BOpcode != ISD::AND && BOpcode != ISD::OR && BOpcode != ISD::XOR)
    return SDValue();

  // We need at least one concatenation operation of a binop operand to make
  // this transform worthwhile. The concat must double the input vector sizes.
  auto GetSubVector = [ConcatOpNum](SDValue V) -> SDValue {
    if (V.getOpcode() == ISD::CONCAT_VECTORS && V.getNumOperands() == 2)
      return V.getOperand(ConcatOpNum);
    return SDValue();
  };
  SDValue SubVecL = GetSubVector(peekThroughBitcasts(BinOp.getOperand(0)));
  SDValue SubVecR = GetSubVector(peekThroughBitcasts(BinOp.getOperand(1)));

  if (SubVecL || SubVecR) {
    // If a binop operand was not the result of a concat, we must extract a
    // half-sized operand for our new narrow binop:
    // extract (binop (concat X1, X2), (concat Y1, Y2)), N --> binop XN, YN
    // extract (binop (concat X1, X2), Y), N --> binop XN, (extract Y, IndexC)
    // extract (binop X, (concat Y1, Y2)), N --> binop (extract X, IndexC), YN
    SDLoc DL(Extract);
    SDValue IndexC = DAG.getVectorIdxConstant(ExtBOIdx, DL);
    SDValue X = SubVecL ? DAG.getBitcast(NarrowBVT, SubVecL)
                        : DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, NarrowBVT,
                                      BinOp.getOperand(0), IndexC);

    SDValue Y = SubVecR ? DAG.getBitcast(NarrowBVT, SubVecR)
                        : DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, NarrowBVT,
                                      BinOp.getOperand(1), IndexC);

    SDValue NarrowBinOp = DAG.getNode(BOpcode, DL, NarrowBVT, X, Y);
    return DAG.getBitcast(VT, NarrowBinOp);
  }

  return SDValue();
}

/// If we are extracting a subvector from a wide vector load, convert to a
/// narrow load to eliminate the extraction:
/// (extract_subvector (load wide vector)) --> (load narrow vector)
static SDValue narrowExtractedVectorLoad(SDNode *Extract, SelectionDAG &DAG) {
  // TODO: Add support for big-endian. The offset calculation must be adjusted.
  if (DAG.getDataLayout().isBigEndian())
    return SDValue();

  auto *Ld = dyn_cast<LoadSDNode>(Extract->getOperand(0));
  if (!Ld || Ld->getExtensionType() || !Ld->isSimple())
    return SDValue();

  // Allow targets to opt-out.
  EVT VT = Extract->getValueType(0);

  // We can only create byte sized loads.
  if (!VT.isByteSized())
    return SDValue();

  unsigned Index = Extract->getConstantOperandVal(1);
  unsigned NumElts = VT.getVectorMinNumElements();
  // A fixed length vector being extracted from a scalable vector
  // may not be any *smaller* than the scalable one.
  if (Index == 0 && NumElts >= Ld->getValueType(0).getVectorMinNumElements())
    return SDValue();

  // The definition of EXTRACT_SUBVECTOR states that the index must be a
  // multiple of the minimum number of elements in the result type.
  assert(Index % NumElts == 0 && "The extract subvector index is not a "
                                 "multiple of the result's element count");

  // It's fine to use TypeSize here as we know the offset will not be negative.
  TypeSize Offset = VT.getStoreSize() * (Index / NumElts);

  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  if (!TLI.shouldReduceLoadWidth(Ld, Ld->getExtensionType(), VT))
    return SDValue();

  // The narrow load will be offset from the base address of the old load if
  // we are extracting from something besides index 0 (little-endian).
  SDLoc DL(Extract);

  // TODO: Use "BaseIndexOffset" to make this more effective.
  SDValue NewAddr = DAG.getMemBasePlusOffset(Ld->getBasePtr(), Offset, DL);

  LocationSize StoreSize = LocationSize::precise(VT.getStoreSize());
  MachineFunction &MF = DAG.getMachineFunction();
  MachineMemOperand *MMO;
  if (Offset.isScalable()) {
    MachinePointerInfo MPI =
        MachinePointerInfo(Ld->getPointerInfo().getAddrSpace());
    MMO = MF.getMachineMemOperand(Ld->getMemOperand(), MPI, StoreSize);
  } else
    MMO = MF.getMachineMemOperand(Ld->getMemOperand(), Offset.getFixedValue(),
                                  StoreSize);

  SDValue NewLd = DAG.getLoad(VT, DL, Ld->getChain(), NewAddr, MMO);
  DAG.makeEquivalentMemoryOrdering(Ld, NewLd);
  return NewLd;
}

/// Given  EXTRACT_SUBVECTOR(VECTOR_SHUFFLE(Op0, Op1, Mask)),
/// try to produce  VECTOR_SHUFFLE(EXTRACT_SUBVECTOR(Op?, ?),
///                                EXTRACT_SUBVECTOR(Op?, ?),
///                                Mask'))
/// iff it is legal and profitable to do so. Notably, the trimmed mask
/// (containing only the elements that are extracted)
/// must reference at most two subvectors.
static SDValue foldExtractSubvectorFromShuffleVector(SDNode *N,
                                                     SelectionDAG &DAG,
                                                     const TargetLowering &TLI,
                                                     bool LegalOperations) {
  assert(N->getOpcode() == ISD::EXTRACT_SUBVECTOR &&
         "Must only be called on EXTRACT_SUBVECTOR's");

  SDValue N0 = N->getOperand(0);

  // Only deal with non-scalable vectors.
  EVT NarrowVT = N->getValueType(0);
  EVT WideVT = N0.getValueType();
  if (!NarrowVT.isFixedLengthVector() || !WideVT.isFixedLengthVector())
    return SDValue();

  // The operand must be a shufflevector.
  auto *WideShuffleVector = dyn_cast<ShuffleVectorSDNode>(N0);
  if (!WideShuffleVector)
    return SDValue();

  // The old shuffleneeds to go away.
  if (!WideShuffleVector->hasOneUse())
    return SDValue();

  // And the narrow shufflevector that we'll form must be legal.
  if (LegalOperations &&
      !TLI.isOperationLegalOrCustom(ISD::VECTOR_SHUFFLE, NarrowVT))
    return SDValue();

  uint64_t FirstExtractedEltIdx = N->getConstantOperandVal(1);
  int NumEltsExtracted = NarrowVT.getVectorNumElements();
  assert((FirstExtractedEltIdx % NumEltsExtracted) == 0 &&
         "Extract index is not a multiple of the output vector length.");

  int WideNumElts = WideVT.getVectorNumElements();

  SmallVector<int, 16> NewMask;
  NewMask.reserve(NumEltsExtracted);
  SmallSetVector<std::pair<SDValue /*Op*/, int /*SubvectorIndex*/>, 2>
      DemandedSubvectors;

  // Try to decode the wide mask into narrow mask from at most two subvectors.
  for (int M : WideShuffleVector->getMask().slice(FirstExtractedEltIdx,
                                                  NumEltsExtracted)) {
    assert((M >= -1) && (M < (2 * WideNumElts)) &&
           "Out-of-bounds shuffle mask?");

    if (M < 0) {
      // Does not depend on operands, does not require adjustment.
      NewMask.emplace_back(M);
      continue;
    }

    // From which operand of the shuffle does this shuffle mask element pick?
    int WideShufOpIdx = M / WideNumElts;
    // Which element of that operand is picked?
    int OpEltIdx = M % WideNumElts;

    assert((OpEltIdx + WideShufOpIdx * WideNumElts) == M &&
           "Shuffle mask vector decomposition failure.");

    // And which NumEltsExtracted-sized subvector of that operand is that?
    int OpSubvecIdx = OpEltIdx / NumEltsExtracted;
    // And which element within that subvector of that operand is that?
    int OpEltIdxInSubvec = OpEltIdx % NumEltsExtracted;

    assert((OpEltIdxInSubvec + OpSubvecIdx * NumEltsExtracted) == OpEltIdx &&
           "Shuffle mask subvector decomposition failure.");

    assert((OpEltIdxInSubvec + OpSubvecIdx * NumEltsExtracted +
            WideShufOpIdx * WideNumElts) == M &&
           "Shuffle mask full decomposition failure.");

    SDValue Op = WideShuffleVector->getOperand(WideShufOpIdx);

    if (Op.isUndef()) {
      // Picking from an undef operand. Let's adjust mask instead.
      NewMask.emplace_back(-1);
      continue;
    }

    const std::pair<SDValue, int> DemandedSubvector =
        std::make_pair(Op, OpSubvecIdx);

    if (DemandedSubvectors.insert(DemandedSubvector)) {
      if (DemandedSubvectors.size() > 2)
        return SDValue(); // We can't handle more than two subvectors.
      // How many elements into the WideVT does this subvector start?
      int Index = NumEltsExtracted * OpSubvecIdx;
      // Bail out if the extraction isn't going to be cheap.
      if (!TLI.isExtractSubvectorCheap(NarrowVT, WideVT, Index))
        return SDValue();
    }

    // Ok, but from which operand of the new shuffle will this element pick?
    int NewOpIdx =
        getFirstIndexOf(DemandedSubvectors.getArrayRef(), DemandedSubvector);
    assert((NewOpIdx == 0 || NewOpIdx == 1) && "Unexpected operand index.");

    int AdjM = OpEltIdxInSubvec + NewOpIdx * NumEltsExtracted;
    NewMask.emplace_back(AdjM);
  }
  assert(NewMask.size() == (unsigned)NumEltsExtracted && "Produced bad mask.");
  assert(DemandedSubvectors.size() <= 2 &&
         "Should have ended up demanding at most two subvectors.");

  // Did we discover that the shuffle does not actually depend on operands?
  if (DemandedSubvectors.empty())
    return DAG.getUNDEF(NarrowVT);

  // Profitability check: only deal with extractions from the first subvector
  // unless the mask becomes an identity mask.
  if (!ShuffleVectorInst::isIdentityMask(NewMask, NewMask.size()) ||
      any_of(NewMask, [](int M) { return M < 0; }))
    for (auto &DemandedSubvector : DemandedSubvectors)
      if (DemandedSubvector.second != 0)
        return SDValue();

  // We still perform the exact same EXTRACT_SUBVECTOR,  just on different
  // operand[s]/index[es], so there is no point in checking for it's legality.

  // Do not turn a legal shuffle into an illegal one.
  if (TLI.isShuffleMaskLegal(WideShuffleVector->getMask(), WideVT) &&
      !TLI.isShuffleMaskLegal(NewMask, NarrowVT))
    return SDValue();

  SDLoc DL(N);

  SmallVector<SDValue, 2> NewOps;
  for (const std::pair<SDValue /*Op*/, int /*SubvectorIndex*/>
           &DemandedSubvector : DemandedSubvectors) {
    // How many elements into the WideVT does this subvector start?
    int Index = NumEltsExtracted * DemandedSubvector.second;
    SDValue IndexC = DAG.getVectorIdxConstant(Index, DL);
    NewOps.emplace_back(DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, NarrowVT,
                                    DemandedSubvector.first, IndexC));
  }
  assert((NewOps.size() == 1 || NewOps.size() == 2) &&
         "Should end up with either one or two ops");

  // If we ended up with only one operand, pad with an undef.
  if (NewOps.size() == 1)
    NewOps.emplace_back(DAG.getUNDEF(NarrowVT));

  return DAG.getVectorShuffle(NarrowVT, DL, NewOps[0], NewOps[1], NewMask);
}

SDValue DAGCombiner::visitEXTRACT_SUBVECTOR(SDNode *N) {
  EVT NVT = N->getValueType(0);
  SDValue V = N->getOperand(0);
  uint64_t ExtIdx = N->getConstantOperandVal(1);
  SDLoc DL(N);

  // Extract from UNDEF is UNDEF.
  if (V.isUndef())
    return DAG.getUNDEF(NVT);

  if (TLI.isOperationLegalOrCustomOrPromote(ISD::LOAD, NVT))
    if (SDValue NarrowLoad = narrowExtractedVectorLoad(N, DAG))
      return NarrowLoad;

  // Combine an extract of an extract into a single extract_subvector.
  // ext (ext X, C), 0 --> ext X, C
  if (ExtIdx == 0 && V.getOpcode() == ISD::EXTRACT_SUBVECTOR && V.hasOneUse()) {
    if (TLI.isExtractSubvectorCheap(NVT, V.getOperand(0).getValueType(),
                                    V.getConstantOperandVal(1)) &&
        TLI.isOperationLegalOrCustom(ISD::EXTRACT_SUBVECTOR, NVT)) {
      return DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, NVT, V.getOperand(0),
                         V.getOperand(1));
    }
  }

  // ty1 extract_vector(ty2 splat(V))) -> ty1 splat(V)
  if (V.getOpcode() == ISD::SPLAT_VECTOR)
    if (DAG.isConstantValueOfAnyType(V.getOperand(0)) || V.hasOneUse())
      if (!LegalOperations || TLI.isOperationLegal(ISD::SPLAT_VECTOR, NVT))
        return DAG.getSplatVector(NVT, DL, V.getOperand(0));

  // extract_subvector(insert_subvector(x,y,c1),c2)
  //  --> extract_subvector(y,c2-c1)
  // iff we're just extracting from the inserted subvector.
  if (V.getOpcode() == ISD::INSERT_SUBVECTOR) {
    SDValue InsSub = V.getOperand(1);
    EVT InsSubVT = InsSub.getValueType();
    unsigned NumInsElts = InsSubVT.getVectorMinNumElements();
    unsigned InsIdx = V.getConstantOperandVal(2);
    unsigned NumSubElts = NVT.getVectorMinNumElements();
    if (InsIdx <= ExtIdx && (ExtIdx + NumSubElts) <= (InsIdx + NumInsElts) &&
        TLI.isExtractSubvectorCheap(NVT, InsSubVT, ExtIdx - InsIdx) &&
        InsSubVT.isFixedLengthVector() && NVT.isFixedLengthVector() &&
        V.getValueType().isFixedLengthVector())
      return DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, NVT, InsSub,
                         DAG.getVectorIdxConstant(ExtIdx - InsIdx, DL));
  }

  // Try to move vector bitcast after extract_subv by scaling extraction index:
  // extract_subv (bitcast X), Index --> bitcast (extract_subv X, Index')
  if (V.getOpcode() == ISD::BITCAST &&
      V.getOperand(0).getValueType().isVector() &&
      (!LegalOperations || TLI.isOperationLegal(ISD::BITCAST, NVT))) {
    SDValue SrcOp = V.getOperand(0);
    EVT SrcVT = SrcOp.getValueType();
    unsigned SrcNumElts = SrcVT.getVectorMinNumElements();
    unsigned DestNumElts = V.getValueType().getVectorMinNumElements();
    if ((SrcNumElts % DestNumElts) == 0) {
      unsigned SrcDestRatio = SrcNumElts / DestNumElts;
      ElementCount NewExtEC = NVT.getVectorElementCount() * SrcDestRatio;
      EVT NewExtVT =
          EVT::getVectorVT(*DAG.getContext(), SrcVT.getScalarType(), NewExtEC);
      if (TLI.isOperationLegalOrCustom(ISD::EXTRACT_SUBVECTOR, NewExtVT)) {
        SDValue NewIndex = DAG.getVectorIdxConstant(ExtIdx * SrcDestRatio, DL);
        SDValue NewExtract = DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, NewExtVT,
                                         V.getOperand(0), NewIndex);
        return DAG.getBitcast(NVT, NewExtract);
      }
    }
    if ((DestNumElts % SrcNumElts) == 0) {
      unsigned DestSrcRatio = DestNumElts / SrcNumElts;
      if (NVT.getVectorElementCount().isKnownMultipleOf(DestSrcRatio)) {
        ElementCount NewExtEC =
            NVT.getVectorElementCount().divideCoefficientBy(DestSrcRatio);
        EVT ScalarVT = SrcVT.getScalarType();
        if ((ExtIdx % DestSrcRatio) == 0) {
          unsigned IndexValScaled = ExtIdx / DestSrcRatio;
          EVT NewExtVT =
              EVT::getVectorVT(*DAG.getContext(), ScalarVT, NewExtEC);
          if (TLI.isOperationLegalOrCustom(ISD::EXTRACT_SUBVECTOR, NewExtVT)) {
            SDValue NewIndex = DAG.getVectorIdxConstant(IndexValScaled, DL);
            SDValue NewExtract =
                DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, NewExtVT,
                            V.getOperand(0), NewIndex);
            return DAG.getBitcast(NVT, NewExtract);
          }
          if (NewExtEC.isScalar() &&
              TLI.isOperationLegalOrCustom(ISD::EXTRACT_VECTOR_ELT, ScalarVT)) {
            SDValue NewIndex = DAG.getVectorIdxConstant(IndexValScaled, DL);
            SDValue NewExtract =
                DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, ScalarVT,
                            V.getOperand(0), NewIndex);
            return DAG.getBitcast(NVT, NewExtract);
          }
        }
      }
    }
  }

  if (V.getOpcode() == ISD::CONCAT_VECTORS) {
    unsigned ExtNumElts = NVT.getVectorMinNumElements();
    EVT ConcatSrcVT = V.getOperand(0).getValueType();
    assert(ConcatSrcVT.getVectorElementType() == NVT.getVectorElementType() &&
           "Concat and extract subvector do not change element type");
    assert((ExtIdx % ExtNumElts) == 0 &&
           "Extract index is not a multiple of the input vector length.");

    unsigned ConcatSrcNumElts = ConcatSrcVT.getVectorMinNumElements();
    unsigned ConcatOpIdx = ExtIdx / ConcatSrcNumElts;

    // If the concatenated source types match this extract, it's a direct
    // simplification:
    // extract_subvec (concat V1, V2, ...), i --> Vi
    if (NVT.getVectorElementCount() == ConcatSrcVT.getVectorElementCount())
      return V.getOperand(ConcatOpIdx);

    // If the concatenated source vectors are a multiple length of this extract,
    // then extract a fraction of one of those source vectors directly from a
    // concat operand. Example:
    //   v2i8 extract_subvec (v16i8 concat (v8i8 X), (v8i8 Y), 14 -->
    //   v2i8 extract_subvec v8i8 Y, 6
    if (NVT.isFixedLengthVector() && ConcatSrcVT.isFixedLengthVector() &&
        ConcatSrcNumElts % ExtNumElts == 0) {
      unsigned NewExtIdx = ExtIdx - ConcatOpIdx * ConcatSrcNumElts;
      assert(NewExtIdx + ExtNumElts <= ConcatSrcNumElts &&
             "Trying to extract from >1 concat operand?");
      assert(NewExtIdx % ExtNumElts == 0 &&
             "Extract index is not a multiple of the input vector length.");
      SDValue NewIndexC = DAG.getVectorIdxConstant(NewExtIdx, DL);
      return DAG.getNode(ISD::EXTRACT_SUBVECTOR, DL, NVT,
                         V.getOperand(ConcatOpIdx), NewIndexC);
    }
  }

  if (SDValue V =
          foldExtractSubvectorFromShuffleVector(N, DAG, TLI, LegalOperations))
    return V;

  V = peekThroughBitcasts(V);

  // If the input is a build vector. Try to make a smaller build vector.
  if (V.getOpcode() == ISD::BUILD_VECTOR) {
    EVT InVT = V.getValueType();
    unsigned ExtractSize = NVT.getSizeInBits();
    unsigned EltSize = InVT.getScalarSizeInBits();
    // Only do this if we won't split any elements.
    if (ExtractSize % EltSize == 0) {
      unsigned NumElems = ExtractSize / EltSize;
      EVT EltVT = InVT.getVectorElementType();
      EVT ExtractVT =
          NumElems == 1 ? EltVT
                        : EVT::getVectorVT(*DAG.getContext(), EltVT, NumElems);
      if ((Level < AfterLegalizeDAG ||
           (NumElems == 1 ||
            TLI.isOperationLegal(ISD::BUILD_VECTOR, ExtractVT))) &&
          (!LegalTypes || TLI.isTypeLegal(ExtractVT))) {
        unsigned IdxVal = (ExtIdx * NVT.getScalarSizeInBits()) / EltSize;

        if (NumElems == 1) {
          SDValue Src = V->getOperand(IdxVal);
          if (EltVT != Src.getValueType())
            Src = DAG.getNode(ISD::TRUNCATE, DL, EltVT, Src);
          return DAG.getBitcast(NVT, Src);
        }

        // Extract the pieces from the original build_vector.
        SDValue BuildVec =
            DAG.getBuildVector(ExtractVT, DL, V->ops().slice(IdxVal, NumElems));
        return DAG.getBitcast(NVT, BuildVec);
      }
    }
  }

  if (V.getOpcode() == ISD::INSERT_SUBVECTOR) {
    // Handle only simple case where vector being inserted and vector
    // being extracted are of same size.
    EVT SmallVT = V.getOperand(1).getValueType();
    if (!NVT.bitsEq(SmallVT))
      return SDValue();

    // Combine:
    //    (extract_subvec (insert_subvec V1, V2, InsIdx), ExtIdx)
    // Into:
    //    indices are equal or bit offsets are equal => V1
    //    otherwise => (extract_subvec V1, ExtIdx)
    uint64_t InsIdx = V.getConstantOperandVal(2);
    if (InsIdx * SmallVT.getScalarSizeInBits() ==
        ExtIdx * NVT.getScalarSizeInBits()) {
      if (LegalOperations && !TLI.isOperationLegal(ISD::BITCAST, NVT))
        return SDValue();

      return DAG.getBitcast(NVT, V.getOperand(1));
    }
    return DAG.getNode(
        ISD::EXTRACT_SUBVECTOR, DL, NVT,
        DAG.getBitcast(N->getOperand(0).getValueType(), V.getOperand(0)),
        N->getOperand(1));
  }

  if (SDValue NarrowBOp = narrowExtractedVectorBinOp(N, DAG, LegalOperations))
    return NarrowBOp;

  if (SimplifyDemandedVectorElts(SDValue(N, 0)))
    return SDValue(N, 0);

  return SDValue();
}

/// Try to convert a wide shuffle of concatenated vectors into 2 narrow shuffles
/// followed by concatenation. Narrow vector ops may have better performance
/// than wide ops, and this can unlock further narrowing of other vector ops.
/// Targets can invert this transform later if it is not profitable.
static SDValue foldShuffleOfConcatUndefs(ShuffleVectorSDNode *Shuf,
                                         SelectionDAG &DAG) {
  SDValue N0 = Shuf->getOperand(0), N1 = Shuf->getOperand(1);
  if (N0.getOpcode() != ISD::CONCAT_VECTORS || N0.getNumOperands() != 2 ||
      N1.getOpcode() != ISD::CONCAT_VECTORS || N1.getNumOperands() != 2 ||
      !N0.getOperand(1).isUndef() || !N1.getOperand(1).isUndef())
    return SDValue();

  // Split the wide shuffle mask into halves. Any mask element that is accessing
  // operand 1 is offset down to account for narrowing of the vectors.
  ArrayRef<int> Mask = Shuf->getMask();
  EVT VT = Shuf->getValueType(0);
  unsigned NumElts = VT.getVectorNumElements();
  unsigned HalfNumElts = NumElts / 2;
  SmallVector<int, 16> Mask0(HalfNumElts, -1);
  SmallVector<int, 16> Mask1(HalfNumElts, -1);
  for (unsigned i = 0; i != NumElts; ++i) {
    if (Mask[i] == -1)
      continue;
    // If we reference the upper (undef) subvector then the element is undef.
    if ((Mask[i] % NumElts) >= HalfNumElts)
      continue;
    int M = Mask[i] < (int)NumElts ? Mask[i] : Mask[i] - (int)HalfNumElts;
    if (i < HalfNumElts)
      Mask0[i] = M;
    else
      Mask1[i - HalfNumElts] = M;
  }

  // Ask the target if this is a valid transform.
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  EVT HalfVT = EVT::getVectorVT(*DAG.getContext(), VT.getScalarType(),
                                HalfNumElts);
  if (!TLI.isShuffleMaskLegal(Mask0, HalfVT) ||
      !TLI.isShuffleMaskLegal(Mask1, HalfVT))
    return SDValue();

  // shuffle (concat X, undef), (concat Y, undef), Mask -->
  // concat (shuffle X, Y, Mask0), (shuffle X, Y, Mask1)
  SDValue X = N0.getOperand(0), Y = N1.getOperand(0);
  SDLoc DL(Shuf);
  SDValue Shuf0 = DAG.getVectorShuffle(HalfVT, DL, X, Y, Mask0);
  SDValue Shuf1 = DAG.getVectorShuffle(HalfVT, DL, X, Y, Mask1);
  return DAG.getNode(ISD::CONCAT_VECTORS, DL, VT, Shuf0, Shuf1);
}

// Tries to turn a shuffle of two CONCAT_VECTORS into a single concat,
// or turn a shuffle of a single concat into simpler shuffle then concat.
static SDValue partitionShuffleOfConcats(SDNode *N, SelectionDAG &DAG) {
  EVT VT = N->getValueType(0);
  unsigned NumElts = VT.getVectorNumElements();

  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  ShuffleVectorSDNode *SVN = cast<ShuffleVectorSDNode>(N);
  ArrayRef<int> Mask = SVN->getMask();

  SmallVector<SDValue, 4> Ops;
  EVT ConcatVT = N0.getOperand(0).getValueType();
  unsigned NumElemsPerConcat = ConcatVT.getVectorNumElements();
  unsigned NumConcats = NumElts / NumElemsPerConcat;

  auto IsUndefMaskElt = [](int i) { return i == -1; };

  // Special case: shuffle(concat(A,B)) can be more efficiently represented
  // as concat(shuffle(A,B),UNDEF) if the shuffle doesn't set any of the high
  // half vector elements.
  if (NumElemsPerConcat * 2 == NumElts && N1.isUndef() &&
      llvm::all_of(Mask.slice(NumElemsPerConcat, NumElemsPerConcat),
                   IsUndefMaskElt)) {
    N0 = DAG.getVectorShuffle(ConcatVT, SDLoc(N), N0.getOperand(0),
                              N0.getOperand(1),
                              Mask.slice(0, NumElemsPerConcat));
    N1 = DAG.getUNDEF(ConcatVT);
    return DAG.getNode(ISD::CONCAT_VECTORS, SDLoc(N), VT, N0, N1);
  }

  // Look at every vector that's inserted. We're looking for exact
  // subvector-sized copies from a concatenated vector
  for (unsigned I = 0; I != NumConcats; ++I) {
    unsigned Begin = I * NumElemsPerConcat;
    ArrayRef<int> SubMask = Mask.slice(Begin, NumElemsPerConcat);

    // Make sure we're dealing with a copy.
    if (llvm::all_of(SubMask, IsUndefMaskElt)) {
      Ops.push_back(DAG.getUNDEF(ConcatVT));
      continue;
    }

    int OpIdx = -1;
    for (int i = 0; i != (int)NumElemsPerConcat; ++i) {
      if (IsUndefMaskElt(SubMask[i]))
        continue;
      if ((SubMask[i] % (int)NumElemsPerConcat) != i)
        return SDValue();
      int EltOpIdx = SubMask[i] / NumElemsPerConcat;
      if (0 <= OpIdx && EltOpIdx != OpIdx)
        return SDValue();
      OpIdx = EltOpIdx;
    }
    assert(0 <= OpIdx && "Unknown concat_vectors op");

    if (OpIdx < (int)N0.getNumOperands())
      Ops.push_back(N0.getOperand(OpIdx));
    else
      Ops.push_back(N1.getOperand(OpIdx - N0.getNumOperands()));
  }

  return DAG.getNode(ISD::CONCAT_VECTORS, SDLoc(N), VT, Ops);
}

// Attempt to combine a shuffle of 2 inputs of 'scalar sources' -
// BUILD_VECTOR or SCALAR_TO_VECTOR into a single BUILD_VECTOR.
//
// SHUFFLE(BUILD_VECTOR(), BUILD_VECTOR()) -> BUILD_VECTOR() is always
// a simplification in some sense, but it isn't appropriate in general: some
// BUILD_VECTORs are substantially cheaper than others. The general case
// of a BUILD_VECTOR requires inserting each element individually (or
// performing the equivalent in a temporary stack variable). A BUILD_VECTOR of
// all constants is a single constant pool load.  A BUILD_VECTOR where each
// element is identical is a splat.  A BUILD_VECTOR where most of the operands
// are undef lowers to a small number of element insertions.
//
// To deal with this, we currently use a bunch of mostly arbitrary heuristics.
// We don't fold shuffles where one side is a non-zero constant, and we don't
// fold shuffles if the resulting (non-splat) BUILD_VECTOR would have duplicate
// non-constant operands. This seems to work out reasonably well in practice.
static SDValue combineShuffleOfScalars(ShuffleVectorSDNode *SVN,
                                       SelectionDAG &DAG,
                                       const TargetLowering &TLI) {
  EVT VT = SVN->getValueType(0);
  unsigned NumElts = VT.getVectorNumElements();
  SDValue N0 = SVN->getOperand(0);
  SDValue N1 = SVN->getOperand(1);

  if (!N0->hasOneUse())
    return SDValue();

  // If only one of N1,N2 is constant, bail out if it is not ALL_ZEROS as
  // discussed above.
  if (!N1.isUndef()) {
    if (!N1->hasOneUse())
      return SDValue();

    bool N0AnyConst = isAnyConstantBuildVector(N0);
    bool N1AnyConst = isAnyConstantBuildVector(N1);
    if (N0AnyConst && !N1AnyConst && !ISD::isBuildVectorAllZeros(N0.getNode()))
      return SDValue();
    if (!N0AnyConst && N1AnyConst && !ISD::isBuildVectorAllZeros(N1.getNode()))
      return SDValue();
  }

  // If both inputs are splats of the same value then we can safely merge this
  // to a single BUILD_VECTOR with undef elements based on the shuffle mask.
  bool IsSplat = false;
  auto *BV0 = dyn_cast<BuildVectorSDNode>(N0);
  auto *BV1 = dyn_cast<BuildVectorSDNode>(N1);
  if (BV0 && BV1)
    if (SDValue Splat0 = BV0->getSplatValue())
      IsSplat = (Splat0 == BV1->getSplatValue());

  SmallVector<SDValue, 8> Ops;
  SmallSet<SDValue, 16> DuplicateOps;
  for (int M : SVN->getMask()) {
    SDValue Op = DAG.getUNDEF(VT.getScalarType());
    if (M >= 0) {
      int Idx = M < (int)NumElts ? M : M - NumElts;
      SDValue &S = (M < (int)NumElts ? N0 : N1);
      if (S.getOpcode() == ISD::BUILD_VECTOR) {
        Op = S.getOperand(Idx);
      } else if (S.getOpcode() == ISD::SCALAR_TO_VECTOR) {
        SDValue Op0 = S.getOperand(0);
        Op = Idx == 0 ? Op0 : DAG.getUNDEF(Op0.getValueType());
      } else {
        // Operand can't be combined - bail out.
        return SDValue();
      }
    }

    // Don't duplicate a non-constant BUILD_VECTOR operand unless we're
    // generating a splat; semantically, this is fine, but it's likely to
    // generate low-quality code if the target can't reconstruct an appropriate
    // shuffle.
    if (!Op.isUndef() && !isIntOrFPConstant(Op))
      if (!IsSplat && !DuplicateOps.insert(Op).second)
        return SDValue();

    Ops.push_back(Op);
  }

  // BUILD_VECTOR requires all inputs to be of the same type, find the
  // maximum type and extend them all.
  EVT SVT = VT.getScalarType();
  if (SVT.isInteger())
    for (SDValue &Op : Ops)
      SVT = (SVT.bitsLT(Op.getValueType()) ? Op.getValueType() : SVT);
  if (SVT != VT.getScalarType())
    for (SDValue &Op : Ops)
      Op = Op.isUndef() ? DAG.getUNDEF(SVT)
                        : (TLI.isZExtFree(Op.getValueType(), SVT)
                               ? DAG.getZExtOrTrunc(Op, SDLoc(SVN), SVT)
                               : DAG.getSExtOrTrunc(Op, SDLoc(SVN), SVT));
  return DAG.getBuildVector(VT, SDLoc(SVN), Ops);
}

// Match shuffles that can be converted to *_vector_extend_in_reg.
// This is often generated during legalization.
// e.g. v4i32 <0,u,1,u> -> (v2i64 any_vector_extend_in_reg(v4i32 src)),
// and returns the EVT to which the extension should be performed.
// NOTE: this assumes that the src is the first operand of the shuffle.
static std::optional<EVT> canCombineShuffleToExtendVectorInreg(
    unsigned Opcode, EVT VT, std::function<bool(unsigned)> Match,
    SelectionDAG &DAG, const TargetLowering &TLI, bool LegalTypes,
    bool LegalOperations) {
  bool IsBigEndian = DAG.getDataLayout().isBigEndian();

  // TODO Add support for big-endian when we have a test case.
  if (!VT.isInteger() || IsBigEndian)
    return std::nullopt;

  unsigned NumElts = VT.getVectorNumElements();
  unsigned EltSizeInBits = VT.getScalarSizeInBits();

  // Attempt to match a '*_extend_vector_inreg' shuffle, we just search for
  // power-of-2 extensions as they are the most likely.
  // FIXME: should try Scale == NumElts case too,
  for (unsigned Scale = 2; Scale < NumElts; Scale *= 2) {
    // The vector width must be a multiple of Scale.
    if (NumElts % Scale != 0)
      continue;

    EVT OutSVT = EVT::getIntegerVT(*DAG.getContext(), EltSizeInBits * Scale);
    EVT OutVT = EVT::getVectorVT(*DAG.getContext(), OutSVT, NumElts / Scale);

    if ((LegalTypes && !TLI.isTypeLegal(OutVT)) ||
        (LegalOperations && !TLI.isOperationLegalOrCustom(Opcode, OutVT)))
      continue;

    if (Match(Scale))
      return OutVT;
  }

  return std::nullopt;
}

// Match shuffles that can be converted to any_vector_extend_in_reg.
// This is often generated during legalization.
// e.g. v4i32 <0,u,1,u> -> (v2i64 any_vector_extend_in_reg(v4i32 src))
static SDValue combineShuffleToAnyExtendVectorInreg(ShuffleVectorSDNode *SVN,
                                                    SelectionDAG &DAG,
                                                    const TargetLowering &TLI,
                                                    bool LegalOperations) {
  EVT VT = SVN->getValueType(0);
  bool IsBigEndian = DAG.getDataLayout().isBigEndian();

  // TODO Add support for big-endian when we have a test case.
  if (!VT.isInteger() || IsBigEndian)
    return SDValue();

  // shuffle<0,-1,1,-1> == (v2i64 anyextend_vector_inreg(v4i32))
  auto isAnyExtend = [NumElts = VT.getVectorNumElements(),
                      Mask = SVN->getMask()](unsigned Scale) {
    for (unsigned i = 0; i != NumElts; ++i) {
      if (Mask[i] < 0)
        continue;
      if ((i % Scale) == 0 && Mask[i] == (int)(i / Scale))
        continue;
      return false;
    }
    return true;
  };

  unsigned Opcode = ISD::ANY_EXTEND_VECTOR_INREG;
  SDValue N0 = SVN->getOperand(0);
  // Never create an illegal type. Only create unsupported operations if we
  // are pre-legalization.
  std::optional<EVT> OutVT = canCombineShuffleToExtendVectorInreg(
      Opcode, VT, isAnyExtend, DAG, TLI, /*LegalTypes=*/true, LegalOperations);
  if (!OutVT)
    return SDValue();
  return DAG.getBitcast(VT, DAG.getNode(Opcode, SDLoc(SVN), *OutVT, N0));
}

// Match shuffles that can be converted to zero_extend_vector_inreg.
// This is often generated during legalization.
// e.g. v4i32 <0,z,1,u> -> (v2i64 zero_extend_vector_inreg(v4i32 src))
static SDValue combineShuffleToZeroExtendVectorInReg(ShuffleVectorSDNode *SVN,
                                                     SelectionDAG &DAG,
                                                     const TargetLowering &TLI,
                                                     bool LegalOperations) {
  bool LegalTypes = true;
  EVT VT = SVN->getValueType(0);
  assert(!VT.isScalableVector() && "Encountered scalable shuffle?");
  unsigned NumElts = VT.getVectorNumElements();
  unsigned EltSizeInBits = VT.getScalarSizeInBits();

  // TODO: add support for big-endian when we have a test case.
  bool IsBigEndian = DAG.getDataLayout().isBigEndian();
  if (!VT.isInteger() || IsBigEndian)
    return SDValue();

  SmallVector<int, 16> Mask(SVN->getMask());
  auto ForEachDecomposedIndice = [NumElts, &Mask](auto Fn) {
    for (int &Indice : Mask) {
      if (Indice < 0)
        continue;
      int OpIdx = (unsigned)Indice < NumElts ? 0 : 1;
      int OpEltIdx = (unsigned)Indice < NumElts ? Indice : Indice - NumElts;
      Fn(Indice, OpIdx, OpEltIdx);
    }
  };

  // Which elements of which operand does this shuffle demand?
  std::array<APInt, 2> OpsDemandedElts;
  for (APInt &OpDemandedElts : OpsDemandedElts)
    OpDemandedElts = APInt::getZero(NumElts);
  ForEachDecomposedIndice(
      [&OpsDemandedElts](int &Indice, int OpIdx, int OpEltIdx) {
        OpsDemandedElts[OpIdx].setBit(OpEltIdx);
      });

  // Element-wise(!), which of these demanded elements are know to be zero?
  std::array<APInt, 2> OpsKnownZeroElts;
  for (auto I : zip(SVN->ops(), OpsDemandedElts, OpsKnownZeroElts))
    std::get<2>(I) =
        DAG.computeVectorKnownZeroElements(std::get<0>(I), std::get<1>(I));

  // Manifest zeroable element knowledge in the shuffle mask.
  // NOTE: we don't have 'zeroable' sentinel value in generic DAG,
  //       this is a local invention, but it won't leak into DAG.
  // FIXME: should we not manifest them, but just check when matching?
  bool HadZeroableElts = false;
  ForEachDecomposedIndice([&OpsKnownZeroElts, &HadZeroableElts](
                              int &Indice, int OpIdx, int OpEltIdx) {
    if (OpsKnownZeroElts[OpIdx][OpEltIdx]) {
      Indice = -2; // Zeroable element.
      HadZeroableElts = true;
    }
  });

  // Don't proceed unless we've refined at least one zeroable mask indice.
  // If we didn't, then we are still trying to match the same shuffle mask
  // we previously tried to match as ISD::ANY_EXTEND_VECTOR_INREG,
  // and evidently failed. Proceeding will lead to endless combine loops.
  if (!HadZeroableElts)
    return SDValue();

  // The shuffle may be more fine-grained than we want. Widen elements first.
  // FIXME: should we do this before manifesting zeroable shuffle mask indices?
  SmallVector<int, 16> ScaledMask;
  getShuffleMaskWithWidestElts(Mask, ScaledMask);
  assert(Mask.size() >= ScaledMask.size() &&
         Mask.size() % ScaledMask.size() == 0 && "Unexpected mask widening.");
  int Prescale = Mask.size() / ScaledMask.size();

  NumElts = ScaledMask.size();
  EltSizeInBits *= Prescale;

  EVT PrescaledVT = EVT::getVectorVT(
      *DAG.getContext(), EVT::getIntegerVT(*DAG.getContext(), EltSizeInBits),
      NumElts);

  if (LegalTypes && !TLI.isTypeLegal(PrescaledVT) && TLI.isTypeLegal(VT))
    return SDValue();

  // For example,
  // shuffle<0,z,1,-1> == (v2i64 zero_extend_vector_inreg(v4i32))
  // But not shuffle<z,z,1,-1> and not shuffle<0,z,z,-1> ! (for same types)
  auto isZeroExtend = [NumElts, &ScaledMask](unsigned Scale) {
    assert(Scale >= 2 && Scale <= NumElts && NumElts % Scale == 0 &&
           "Unexpected mask scaling factor.");
    ArrayRef<int> Mask = ScaledMask;
    for (unsigned SrcElt = 0, NumSrcElts = NumElts / Scale;
         SrcElt != NumSrcElts; ++SrcElt) {
      // Analyze the shuffle mask in Scale-sized chunks.
      ArrayRef<int> MaskChunk = Mask.take_front(Scale);
      assert(MaskChunk.size() == Scale && "Unexpected mask size.");
      Mask = Mask.drop_front(MaskChunk.size());
      // The first indice in this chunk must be SrcElt, but not zero!
      // FIXME: undef should be fine, but that results in more-defined result.
      if (int FirstIndice = MaskChunk[0]; (unsigned)FirstIndice != SrcElt)
        return false;
      // The rest of the indices in this chunk must be zeros.
      // FIXME: undef should be fine, but that results in more-defined result.
      if (!all_of(MaskChunk.drop_front(1),
                  [](int Indice) { return Indice == -2; }))
        return false;
    }
    assert(Mask.empty() && "Did not process the whole mask?");
    return true;
  };

  unsigned Opcode = ISD::ZERO_EXTEND_VECTOR_INREG;
  for (bool Commuted : {false, true}) {
    SDValue Op = SVN->getOperand(!Commuted ? 0 : 1);
    if (Commuted)
      ShuffleVectorSDNode::commuteMask(ScaledMask);
    std::optional<EVT> OutVT = canCombineShuffleToExtendVectorInreg(
        Opcode, PrescaledVT, isZeroExtend, DAG, TLI, LegalTypes,
        LegalOperations);
    if (OutVT)
      return DAG.getBitcast(VT, DAG.getNode(Opcode, SDLoc(SVN), *OutVT,
                                            DAG.getBitcast(PrescaledVT, Op)));
  }
  return SDValue();
}

// Detect 'truncate_vector_inreg' style shuffles that pack the lower parts of
// each source element of a large type into the lowest elements of a smaller
// destination type. This is often generated during legalization.
// If the source node itself was a '*_extend_vector_inreg' node then we should
// then be able to remove it.
static SDValue combineTruncationShuffle(ShuffleVectorSDNode *SVN,
                                        SelectionDAG &DAG) {
  EVT VT = SVN->getValueType(0);
  bool IsBigEndian = DAG.getDataLayout().isBigEndian();

  // TODO Add support for big-endian when we have a test case.
  if (!VT.isInteger() || IsBigEndian)
    return SDValue();

  SDValue N0 = peekThroughBitcasts(SVN->getOperand(0));

  unsigned Opcode = N0.getOpcode();
  if (!ISD::isExtVecInRegOpcode(Opcode))
    return SDValue();

  SDValue N00 = N0.getOperand(0);
  ArrayRef<int> Mask = SVN->getMask();
  unsigned NumElts = VT.getVectorNumElements();
  unsigned EltSizeInBits = VT.getScalarSizeInBits();
  unsigned ExtSrcSizeInBits = N00.getScalarValueSizeInBits();
  unsigned ExtDstSizeInBits = N0.getScalarValueSizeInBits();

  if (ExtDstSizeInBits % ExtSrcSizeInBits != 0)
    return SDValue();
  unsigned ExtScale = ExtDstSizeInBits / ExtSrcSizeInBits;

  // (v4i32 truncate_vector_inreg(v2i64)) == shuffle<0,2-1,-1>
  // (v8i16 truncate_vector_inreg(v4i32)) == shuffle<0,2,4,6,-1,-1,-1,-1>
  // (v8i16 truncate_vector_inreg(v2i64)) == shuffle<0,4,-1,-1,-1,-1,-1,-1>
  auto isTruncate = [&Mask, &NumElts](unsigned Scale) {
    for (unsigned i = 0; i != NumElts; ++i) {
      if (Mask[i] < 0)
        continue;
      if ((i * Scale) < NumElts && Mask[i] == (int)(i * Scale))
        continue;
      return false;
    }
    return true;
  };

  // At the moment we just handle the case where we've truncated back to the
  // same size as before the extension.
  // TODO: handle more extension/truncation cases as cases arise.
  if (EltSizeInBits != ExtSrcSizeInBits)
    return SDValue();

  // We can remove *extend_vector_inreg only if the truncation happens at
  // the same scale as the extension.
  if (isTruncate(ExtScale))
    return DAG.getBitcast(VT, N00);

  return SDValue();
}

// Combine shuffles of splat-shuffles of the form:
// shuffle (shuffle V, undef, splat-mask), undef, M
// If splat-mask contains undef elements, we need to be careful about
// introducing undef's in the folded mask which are not the result of composing
// the masks of the shuffles.
static SDValue combineShuffleOfSplatVal(ShuffleVectorSDNode *Shuf,
                                        SelectionDAG &DAG) {
  EVT VT = Shuf->getValueType(0);
  unsigned NumElts = VT.getVectorNumElements();

  if (!Shuf->getOperand(1).isUndef())
    return SDValue();

  // See if this unary non-splat shuffle actually *is* a splat shuffle,
  // in disguise, with all demanded elements being identical.
  // FIXME: this can be done per-operand.
  if (!Shuf->isSplat()) {
    APInt DemandedElts(NumElts, 0);
    for (int Idx : Shuf->getMask()) {
      if (Idx < 0)
        continue; // Ignore sentinel indices.
      assert((unsigned)Idx < NumElts && "Out-of-bounds shuffle indice?");
      DemandedElts.setBit(Idx);
    }
    assert(DemandedElts.popcount() > 1 && "Is a splat shuffle already?");
    APInt UndefElts;
    if (DAG.isSplatValue(Shuf->getOperand(0), DemandedElts, UndefElts)) {
      // Even if all demanded elements are splat, some of them could be undef.
      // Which lowest demanded element is *not* known-undef?
      std::optional<unsigned> MinNonUndefIdx;
      for (int Idx : Shuf->getMask()) {
        if (Idx < 0 || UndefElts[Idx])
          continue; // Ignore sentinel indices, and undef elements.
        MinNonUndefIdx = std::min<unsigned>(Idx, MinNonUndefIdx.value_or(~0U));
      }
      if (!MinNonUndefIdx)
        return DAG.getUNDEF(VT); // All undef - result is undef.
      assert(*MinNonUndefIdx < NumElts && "Expected valid element index.");
      SmallVector<int, 8> SplatMask(Shuf->getMask());
      for (int &Idx : SplatMask) {
        if (Idx < 0)
          continue; // Passthrough sentinel indices.
        // Otherwise, just pick the lowest demanded non-undef element.
        // Or sentinel undef, if we know we'd pick a known-undef element.
        Idx = UndefElts[Idx] ? -1 : *MinNonUndefIdx;
      }
      assert(SplatMask != Shuf->getMask() && "Expected mask to change!");
      return DAG.getVectorShuffle(VT, SDLoc(Shuf), Shuf->getOperand(0),
                                  Shuf->getOperand(1), SplatMask);
    }
  }

  // If the inner operand is a known splat with no undefs, just return that directly.
  // TODO: Create DemandedElts mask from Shuf's mask.
  // TODO: Allow undef elements and merge with the shuffle code below.
  if (DAG.isSplatValue(Shuf->getOperand(0), /*AllowUndefs*/ false))
    return Shuf->getOperand(0);

  auto *Splat = dyn_cast<ShuffleVectorSDNode>(Shuf->getOperand(0));
  if (!Splat || !Splat->isSplat())
    return SDValue();

  ArrayRef<int> ShufMask = Shuf->getMask();
  ArrayRef<int> SplatMask = Splat->getMask();
  assert(ShufMask.size() == SplatMask.size() && "Mask length mismatch");

  // Prefer simplifying to the splat-shuffle, if possible. This is legal if
  // every undef mask element in the splat-shuffle has a corresponding undef
  // element in the user-shuffle's mask or if the composition of mask elements
  // would result in undef.
  // Examples for (shuffle (shuffle v, undef, SplatMask), undef, UserMask):
  // * UserMask=[0,2,u,u], SplatMask=[2,u,2,u] -> [2,2,u,u]
  //   In this case it is not legal to simplify to the splat-shuffle because we
  //   may be exposing the users of the shuffle an undef element at index 1
  //   which was not there before the combine.
  // * UserMask=[0,u,2,u], SplatMask=[2,u,2,u] -> [2,u,2,u]
  //   In this case the composition of masks yields SplatMask, so it's ok to
  //   simplify to the splat-shuffle.
  // * UserMask=[3,u,2,u], SplatMask=[2,u,2,u] -> [u,u,2,u]
  //   In this case the composed mask includes all undef elements of SplatMask
  //   and in addition sets element zero to undef. It is safe to simplify to
  //   the splat-shuffle.
  auto CanSimplifyToExistingSplat = [](ArrayRef<int> UserMask,
                                       ArrayRef<int> SplatMask) {
    for (unsigned i = 0, e = UserMask.size(); i != e; ++i)
      if (UserMask[i] != -1 && SplatMask[i] == -1 &&
          SplatMask[UserMask[i]] != -1)
        return false;
    return true;
  };
  if (CanSimplifyToExistingSplat(ShufMask, SplatMask))
    return Shuf->getOperand(0);

  // Create a new shuffle with a mask that is composed of the two shuffles'
  // masks.
  SmallVector<int, 32> NewMask;
  for (int Idx : ShufMask)
    NewMask.push_back(Idx == -1 ? -1 : SplatMask[Idx]);

  return DAG.getVectorShuffle(Splat->getValueType(0), SDLoc(Splat),
                              Splat->getOperand(0), Splat->getOperand(1),
                              NewMask);
}

// Combine shuffles of bitcasts into a shuffle of the bitcast type, providing
// the mask can be treated as a larger type.
static SDValue combineShuffleOfBitcast(ShuffleVectorSDNode *SVN,
                                       SelectionDAG &DAG,
                                       const TargetLowering &TLI,
                                       bool LegalOperations) {
  SDValue Op0 = SVN->getOperand(0);
  SDValue Op1 = SVN->getOperand(1);
  EVT VT = SVN->getValueType(0);
  if (Op0.getOpcode() != ISD::BITCAST)
    return SDValue();
  EVT InVT = Op0.getOperand(0).getValueType();
  if (!InVT.isVector() ||
      (!Op1.isUndef() && (Op1.getOpcode() != ISD::BITCAST ||
                          Op1.getOperand(0).getValueType() != InVT)))
    return SDValue();
  if (isAnyConstantBuildVector(Op0.getOperand(0)) &&
      (Op1.isUndef() || isAnyConstantBuildVector(Op1.getOperand(0))))
    return SDValue();

  int VTLanes = VT.getVectorNumElements();
  int InLanes = InVT.getVectorNumElements();
  if (VTLanes <= InLanes || VTLanes % InLanes != 0 ||
      (LegalOperations &&
       !TLI.isOperationLegalOrCustom(ISD::VECTOR_SHUFFLE, InVT)))
    return SDValue();
  int Factor = VTLanes / InLanes;

  // Check that each group of lanes in the mask are either undef or make a valid
  // mask for the wider lane type.
  ArrayRef<int> Mask = SVN->getMask();
  SmallVector<int> NewMask;
  if (!widenShuffleMaskElts(Factor, Mask, NewMask))
    return SDValue();

  if (!TLI.isShuffleMaskLegal(NewMask, InVT))
    return SDValue();

  // Create the new shuffle with the new mask and bitcast it back to the
  // original type.
  SDLoc DL(SVN);
  Op0 = Op0.getOperand(0);
  Op1 = Op1.isUndef() ? DAG.getUNDEF(InVT) : Op1.getOperand(0);
  SDValue NewShuf = DAG.getVectorShuffle(InVT, DL, Op0, Op1, NewMask);
  return DAG.getBitcast(VT, NewShuf);
}

/// Combine shuffle of shuffle of the form:
/// shuf (shuf X, undef, InnerMask), undef, OuterMask --> splat X
static SDValue formSplatFromShuffles(ShuffleVectorSDNode *OuterShuf,
                                     SelectionDAG &DAG) {
  if (!OuterShuf->getOperand(1).isUndef())
    return SDValue();
  auto *InnerShuf = dyn_cast<ShuffleVectorSDNode>(OuterShuf->getOperand(0));
  if (!InnerShuf || !InnerShuf->getOperand(1).isUndef())
    return SDValue();

  ArrayRef<int> OuterMask = OuterShuf->getMask();
  ArrayRef<int> InnerMask = InnerShuf->getMask();
  unsigned NumElts = OuterMask.size();
  assert(NumElts == InnerMask.size() && "Mask length mismatch");
  SmallVector<int, 32> CombinedMask(NumElts, -1);
  int SplatIndex = -1;
  for (unsigned i = 0; i != NumElts; ++i) {
    // Undef lanes remain undef.
    int OuterMaskElt = OuterMask[i];
    if (OuterMaskElt == -1)
      continue;

    // Peek through the shuffle masks to get the underlying source element.
    int InnerMaskElt = InnerMask[OuterMaskElt];
    if (InnerMaskElt == -1)
      continue;

    // Initialize the splatted element.
    if (SplatIndex == -1)
      SplatIndex = InnerMaskElt;

    // Non-matching index - this is not a splat.
    if (SplatIndex != InnerMaskElt)
      return SDValue();

    CombinedMask[i] = InnerMaskElt;
  }
  assert((all_of(CombinedMask, [](int M) { return M == -1; }) ||
          getSplatIndex(CombinedMask) != -1) &&
         "Expected a splat mask");

  // TODO: The transform may be a win even if the mask is not legal.
  EVT VT = OuterShuf->getValueType(0);
  assert(VT == InnerShuf->getValueType(0) && "Expected matching shuffle types");
  if (!DAG.getTargetLoweringInfo().isShuffleMaskLegal(CombinedMask, VT))
    return SDValue();

  return DAG.getVectorShuffle(VT, SDLoc(OuterShuf), InnerShuf->getOperand(0),
                              InnerShuf->getOperand(1), CombinedMask);
}

/// If the shuffle mask is taking exactly one element from the first vector
/// operand and passing through all other elements from the second vector
/// operand, return the index of the mask element that is choosing an element
/// from the first operand. Otherwise, return -1.
static int getShuffleMaskIndexOfOneElementFromOp0IntoOp1(ArrayRef<int> Mask) {
  int MaskSize = Mask.size();
  int EltFromOp0 = -1;
  // TODO: This does not match if there are undef elements in the shuffle mask.
  // Should we ignore undefs in the shuffle mask instead? The trade-off is
  // removing an instruction (a shuffle), but losing the knowledge that some
  // vector lanes are not needed.
  for (int i = 0; i != MaskSize; ++i) {
    if (Mask[i] >= 0 && Mask[i] < MaskSize) {
      // We're looking for a shuffle of exactly one element from operand 0.
      if (EltFromOp0 != -1)
        return -1;
      EltFromOp0 = i;
    } else if (Mask[i] != i + MaskSize) {
      // Nothing from operand 1 can change lanes.
      return -1;
    }
  }
  return EltFromOp0;
}

/// If a shuffle inserts exactly one element from a source vector operand into
/// another vector operand and we can access the specified element as a scalar,
/// then we can eliminate the shuffle.
static SDValue replaceShuffleOfInsert(ShuffleVectorSDNode *Shuf,
                                      SelectionDAG &DAG) {
  // First, check if we are taking one element of a vector and shuffling that
  // element into another vector.
  ArrayRef<int> Mask = Shuf->getMask();
  SmallVector<int, 16> CommutedMask(Mask);
  SDValue Op0 = Shuf->getOperand(0);
  SDValue Op1 = Shuf->getOperand(1);
  int ShufOp0Index = getShuffleMaskIndexOfOneElementFromOp0IntoOp1(Mask);
  if (ShufOp0Index == -1) {
    // Commute mask and check again.
    ShuffleVectorSDNode::commuteMask(CommutedMask);
    ShufOp0Index = getShuffleMaskIndexOfOneElementFromOp0IntoOp1(CommutedMask);
    if (ShufOp0Index == -1)
      return SDValue();
    // Commute operands to match the commuted shuffle mask.
    std::swap(Op0, Op1);
    Mask = CommutedMask;
  }

  // The shuffle inserts exactly one element from operand 0 into operand 1.
  // Now see if we can access that element as a scalar via a real insert element
  // instruction.
  // TODO: We can try harder to locate the element as a scalar. Examples: it
  // could be an operand of SCALAR_TO_VECTOR, BUILD_VECTOR, or a constant.
  assert(Mask[ShufOp0Index] >= 0 && Mask[ShufOp0Index] < (int)Mask.size() &&
         "Shuffle mask value must be from operand 0");
  if (Op0.getOpcode() != ISD::INSERT_VECTOR_ELT)
    return SDValue();

  auto *InsIndexC = dyn_cast<ConstantSDNode>(Op0.getOperand(2));
  if (!InsIndexC || InsIndexC->getSExtValue() != Mask[ShufOp0Index])
    return SDValue();

  // There's an existing insertelement with constant insertion index, so we
  // don't need to check the legality/profitability of a replacement operation
  // that differs at most in the constant value. The target should be able to
  // lower any of those in a similar way. If not, legalization will expand this
  // to a scalar-to-vector plus shuffle.
  //
  // Note that the shuffle may move the scalar from the position that the insert
  // element used. Therefore, our new insert element occurs at the shuffle's
  // mask index value, not the insert's index value.
  // shuffle (insertelt v1, x, C), v2, mask --> insertelt v2, x, C'
  SDValue NewInsIndex = DAG.getVectorIdxConstant(ShufOp0Index, SDLoc(Shuf));
  return DAG.getNode(ISD::INSERT_VECTOR_ELT, SDLoc(Shuf), Op0.getValueType(),
                     Op1, Op0.getOperand(1), NewInsIndex);
}

/// If we have a unary shuffle of a shuffle, see if it can be folded away
/// completely. This has the potential to lose undef knowledge because the first
/// shuffle may not have an undef mask element where the second one does. So
/// only call this after doing simplifications based on demanded elements.
static SDValue simplifyShuffleOfShuffle(ShuffleVectorSDNode *Shuf) {
  // shuf (shuf0 X, Y, Mask0), undef, Mask
  auto *Shuf0 = dyn_cast<ShuffleVectorSDNode>(Shuf->getOperand(0));
  if (!Shuf0 || !Shuf->getOperand(1).isUndef())
    return SDValue();

  ArrayRef<int> Mask = Shuf->getMask();
  ArrayRef<int> Mask0 = Shuf0->getMask();
  for (int i = 0, e = (int)Mask.size(); i != e; ++i) {
    // Ignore undef elements.
    if (Mask[i] == -1)
      continue;
    assert(Mask[i] >= 0 && Mask[i] < e && "Unexpected shuffle mask value");

    // Is the element of the shuffle operand chosen by this shuffle the same as
    // the element chosen by the shuffle operand itself?
    if (Mask0[Mask[i]] != Mask0[i])
      return SDValue();
  }
  // Every element of this shuffle is identical to the result of the previous
  // shuffle, so we can replace this value.
  return Shuf->getOperand(0);
}

SDValue DAGCombiner::visitVECTOR_SHUFFLE(SDNode *N) {
  EVT VT = N->getValueType(0);
  unsigned NumElts = VT.getVectorNumElements();

  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);

  assert(N0.getValueType() == VT && "Vector shuffle must be normalized in DAG");

  // Canonicalize shuffle undef, undef -> undef
  if (N0.isUndef() && N1.isUndef())
    return DAG.getUNDEF(VT);

  ShuffleVectorSDNode *SVN = cast<ShuffleVectorSDNode>(N);

  // Canonicalize shuffle v, v -> v, undef
  if (N0 == N1)
    return DAG.getVectorShuffle(VT, SDLoc(N), N0, DAG.getUNDEF(VT),
                                createUnaryMask(SVN->getMask(), NumElts));

  // Canonicalize shuffle undef, v -> v, undef.  Commute the shuffle mask.
  if (N0.isUndef())
    return DAG.getCommutedVectorShuffle(*SVN);

  // Remove references to rhs if it is undef
  if (N1.isUndef()) {
    bool Changed = false;
    SmallVector<int, 8> NewMask;
    for (unsigned i = 0; i != NumElts; ++i) {
      int Idx = SVN->getMaskElt(i);
      if (Idx >= (int)NumElts) {
        Idx = -1;
        Changed = true;
      }
      NewMask.push_back(Idx);
    }
    if (Changed)
      return DAG.getVectorShuffle(VT, SDLoc(N), N0, N1, NewMask);
  }

  if (SDValue InsElt = replaceShuffleOfInsert(SVN, DAG))
    return InsElt;

  // A shuffle of a single vector that is a splatted value can always be folded.
  if (SDValue V = combineShuffleOfSplatVal(SVN, DAG))
    return V;

  if (SDValue V = formSplatFromShuffles(SVN, DAG))
    return V;

  // If it is a splat, check if the argument vector is another splat or a
  // build_vector.
  if (SVN->isSplat() && SVN->getSplatIndex() < (int)NumElts) {
    int SplatIndex = SVN->getSplatIndex();
    if (N0.hasOneUse() && TLI.isExtractVecEltCheap(VT, SplatIndex) &&
        TLI.isBinOp(N0.getOpcode()) && N0->getNumValues() == 1) {
      // splat (vector_bo L, R), Index -->
      // splat (scalar_bo (extelt L, Index), (extelt R, Index))
      SDValue L = N0.getOperand(0), R = N0.getOperand(1);
      SDLoc DL(N);
      EVT EltVT = VT.getScalarType();
      SDValue Index = DAG.getVectorIdxConstant(SplatIndex, DL);
      SDValue ExtL = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, EltVT, L, Index);
      SDValue ExtR = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, EltVT, R, Index);
      SDValue NewBO =
          DAG.getNode(N0.getOpcode(), DL, EltVT, ExtL, ExtR, N0->getFlags());
      SDValue Insert = DAG.getNode(ISD::SCALAR_TO_VECTOR, DL, VT, NewBO);
      SmallVector<int, 16> ZeroMask(VT.getVectorNumElements(), 0);
      return DAG.getVectorShuffle(VT, DL, Insert, DAG.getUNDEF(VT), ZeroMask);
    }

    // splat(scalar_to_vector(x), 0) -> build_vector(x,...,x)
    // splat(insert_vector_elt(v, x, c), c) -> build_vector(x,...,x)
    if ((!LegalOperations || TLI.isOperationLegal(ISD::BUILD_VECTOR, VT)) &&
        N0.hasOneUse()) {
      if (N0.getOpcode() == ISD::SCALAR_TO_VECTOR && SplatIndex == 0)
        return DAG.getSplatBuildVector(VT, SDLoc(N), N0.getOperand(0));

      if (N0.getOpcode() == ISD::INSERT_VECTOR_ELT)
        if (auto *Idx = dyn_cast<ConstantSDNode>(N0.getOperand(2)))
          if (Idx->getAPIntValue() == SplatIndex)
            return DAG.getSplatBuildVector(VT, SDLoc(N), N0.getOperand(1));

      // Look through a bitcast if LE and splatting lane 0, through to a
      // scalar_to_vector or a build_vector.
      if (N0.getOpcode() == ISD::BITCAST && N0.getOperand(0).hasOneUse() &&
          SplatIndex == 0 && DAG.getDataLayout().isLittleEndian() &&
          (N0.getOperand(0).getOpcode() == ISD::SCALAR_TO_VECTOR ||
           N0.getOperand(0).getOpcode() == ISD::BUILD_VECTOR)) {
        EVT N00VT = N0.getOperand(0).getValueType();
        if (VT.getScalarSizeInBits() <= N00VT.getScalarSizeInBits() &&
            VT.isInteger() && N00VT.isInteger()) {
          EVT InVT =
              TLI.getTypeToTransformTo(*DAG.getContext(), VT.getScalarType());
          SDValue Op = DAG.getZExtOrTrunc(N0.getOperand(0).getOperand(0),
                                          SDLoc(N), InVT);
          return DAG.getSplatBuildVector(VT, SDLoc(N), Op);
        }
      }
    }

    // If this is a bit convert that changes the element type of the vector but
    // not the number of vector elements, look through it.  Be careful not to
    // look though conversions that change things like v4f32 to v2f64.
    SDNode *V = N0.getNode();
    if (V->getOpcode() == ISD::BITCAST) {
      SDValue ConvInput = V->getOperand(0);
      if (ConvInput.getValueType().isVector() &&
          ConvInput.getValueType().getVectorNumElements() == NumElts)
        V = ConvInput.getNode();
    }

    if (V->getOpcode() == ISD::BUILD_VECTOR) {
      assert(V->getNumOperands() == NumElts &&
             "BUILD_VECTOR has wrong number of operands");
      SDValue Base;
      bool AllSame = true;
      for (unsigned i = 0; i != NumElts; ++i) {
        if (!V->getOperand(i).isUndef()) {
          Base = V->getOperand(i);
          break;
        }
      }
      // Splat of <u, u, u, u>, return <u, u, u, u>
      if (!Base.getNode())
        return N0;
      for (unsigned i = 0; i != NumElts; ++i) {
        if (V->getOperand(i) != Base) {
          AllSame = false;
          break;
        }
      }
      // Splat of <x, x, x, x>, return <x, x, x, x>
      if (AllSame)
        return N0;

      // Canonicalize any other splat as a build_vector.
      SDValue Splatted = V->getOperand(SplatIndex);
      SmallVector<SDValue, 8> Ops(NumElts, Splatted);
      SDValue NewBV = DAG.getBuildVector(V->getValueType(0), SDLoc(N), Ops);

      // We may have jumped through bitcasts, so the type of the
      // BUILD_VECTOR may not match the type of the shuffle.
      if (V->getValueType(0) != VT)
        NewBV = DAG.getBitcast(VT, NewBV);
      return NewBV;
    }
  }

  // Simplify source operands based on shuffle mask.
  if (SimplifyDemandedVectorElts(SDValue(N, 0)))
    return SDValue(N, 0);

  // This is intentionally placed after demanded elements simplification because
  // it could eliminate knowledge of undef elements created by this shuffle.
  if (SDValue ShufOp = simplifyShuffleOfShuffle(SVN))
    return ShufOp;

  // Match shuffles that can be converted to any_vector_extend_in_reg.
  if (SDValue V =
          combineShuffleToAnyExtendVectorInreg(SVN, DAG, TLI, LegalOperations))
    return V;

  // Combine "truncate_vector_in_reg" style shuffles.
  if (SDValue V = combineTruncationShuffle(SVN, DAG))
    return V;

  if (N0.getOpcode() == ISD::CONCAT_VECTORS &&
      Level < AfterLegalizeVectorOps &&
      (N1.isUndef() ||
      (N1.getOpcode() == ISD::CONCAT_VECTORS &&
       N0.getOperand(0).getValueType() == N1.getOperand(0).getValueType()))) {
    if (SDValue V = partitionShuffleOfConcats(N, DAG))
      return V;
  }

  // A shuffle of a concat of the same narrow vector can be reduced to use
  // only low-half elements of a concat with undef:
  // shuf (concat X, X), undef, Mask --> shuf (concat X, undef), undef, Mask'
  if (N0.getOpcode() == ISD::CONCAT_VECTORS && N1.isUndef() &&
      N0.getNumOperands() == 2 &&
      N0.getOperand(0) == N0.getOperand(1)) {
    int HalfNumElts = (int)NumElts / 2;
    SmallVector<int, 8> NewMask;
    for (unsigned i = 0; i != NumElts; ++i) {
      int Idx = SVN->getMaskElt(i);
      if (Idx >= HalfNumElts) {
        assert(Idx < (int)NumElts && "Shuffle mask chooses undef op");
        Idx -= HalfNumElts;
      }
      NewMask.push_back(Idx);
    }
    if (TLI.isShuffleMaskLegal(NewMask, VT)) {
      SDValue UndefVec = DAG.getUNDEF(N0.getOperand(0).getValueType());
      SDValue NewCat = DAG.getNode(ISD::CONCAT_VECTORS, SDLoc(N), VT,
                                   N0.getOperand(0), UndefVec);
      return DAG.getVectorShuffle(VT, SDLoc(N), NewCat, N1, NewMask);
    }
  }

  // See if we can replace a shuffle with an insert_subvector.
  // e.g. v2i32 into v8i32:
  // shuffle(lhs,concat(rhs0,rhs1,rhs2,rhs3),0,1,2,3,10,11,6,7).
  // --> insert_subvector(lhs,rhs1,4).
  if (Level < AfterLegalizeVectorOps && TLI.isTypeLegal(VT) &&
      TLI.isOperationLegalOrCustom(ISD::INSERT_SUBVECTOR, VT)) {
    auto ShuffleToInsert = [&](SDValue LHS, SDValue RHS, ArrayRef<int> Mask) {
      // Ensure RHS subvectors are legal.
      assert(RHS.getOpcode() == ISD::CONCAT_VECTORS && "Can't find subvectors");
      EVT SubVT = RHS.getOperand(0).getValueType();
      int NumSubVecs = RHS.getNumOperands();
      int NumSubElts = SubVT.getVectorNumElements();
      assert((NumElts % NumSubElts) == 0 && "Subvector mismatch");
      if (!TLI.isTypeLegal(SubVT))
        return SDValue();

      // Don't bother if we have an unary shuffle (matches undef + LHS elts).
      if (all_of(Mask, [NumElts](int M) { return M < (int)NumElts; }))
        return SDValue();

      // Search [NumSubElts] spans for RHS sequence.
      // TODO: Can we avoid nested loops to increase performance?
      SmallVector<int> InsertionMask(NumElts);
      for (int SubVec = 0; SubVec != NumSubVecs; ++SubVec) {
        for (int SubIdx = 0; SubIdx != (int)NumElts; SubIdx += NumSubElts) {
          // Reset mask to identity.
          std::iota(InsertionMask.begin(), InsertionMask.end(), 0);

          // Add subvector insertion.
          std::iota(InsertionMask.begin() + SubIdx,
                    InsertionMask.begin() + SubIdx + NumSubElts,
                    NumElts + (SubVec * NumSubElts));

          // See if the shuffle mask matches the reference insertion mask.
          bool MatchingShuffle = true;
          for (int i = 0; i != (int)NumElts; ++i) {
            int ExpectIdx = InsertionMask[i];
            int ActualIdx = Mask[i];
            if (0 <= ActualIdx && ExpectIdx != ActualIdx) {
              MatchingShuffle = false;
              break;
            }
          }

          if (MatchingShuffle)
            return DAG.getNode(ISD::INSERT_SUBVECTOR, SDLoc(N), VT, LHS,
                               RHS.getOperand(SubVec),
                               DAG.getVectorIdxConstant(SubIdx, SDLoc(N)));
        }
      }
      return SDValue();
    };
    ArrayRef<int> Mask = SVN->getMask();
    if (N1.getOpcode() == ISD::CONCAT_VECTORS)
      if (SDValue InsertN1 = ShuffleToInsert(N0, N1, Mask))
        return InsertN1;
    if (N0.getOpcode() == ISD::CONCAT_VECTORS) {
      SmallVector<int> CommuteMask(Mask);
      ShuffleVectorSDNode::commuteMask(CommuteMask);
      if (SDValue InsertN0 = ShuffleToInsert(N1, N0, CommuteMask))
        return InsertN0;
    }
  }

  // If we're not performing a select/blend shuffle, see if we can convert the
  // shuffle into a AND node, with all the out-of-lane elements are known zero.
  if (Level < AfterLegalizeDAG && TLI.isTypeLegal(VT)) {
    bool IsInLaneMask = true;
    ArrayRef<int> Mask = SVN->getMask();
    SmallVector<int, 16> ClearMask(NumElts, -1);
    APInt DemandedLHS = APInt::getZero(NumElts);
    APInt DemandedRHS = APInt::getZero(NumElts);
    for (int I = 0; I != (int)NumElts; ++I) {
      int M = Mask[I];
      if (M < 0)
        continue;
      ClearMask[I] = M == I ? I : (I + NumElts);
      IsInLaneMask &= (M == I) || (M == (int)(I + NumElts));
      if (M != I) {
        APInt &Demanded = M < (int)NumElts ? DemandedLHS : DemandedRHS;
        Demanded.setBit(M % NumElts);
      }
    }
    // TODO: Should we try to mask with N1 as well?
    if (!IsInLaneMask && (!DemandedLHS.isZero() || !DemandedRHS.isZero()) &&
        (DemandedLHS.isZero() || DAG.MaskedVectorIsZero(N0, DemandedLHS)) &&
        (DemandedRHS.isZero() || DAG.MaskedVectorIsZero(N1, DemandedRHS))) {
      SDLoc DL(N);
      EVT IntVT = VT.changeVectorElementTypeToInteger();
      EVT IntSVT = VT.getVectorElementType().changeTypeToInteger();
      // Transform the type to a legal type so that the buildvector constant
      // elements are not illegal. Make sure that the result is larger than the
      // original type, incase the value is split into two (eg i64->i32).
      if (!TLI.isTypeLegal(IntSVT) && LegalTypes)
        IntSVT = TLI.getTypeToTransformTo(*DAG.getContext(), IntSVT);
      if (IntSVT.getSizeInBits() >= IntVT.getScalarSizeInBits()) {
        SDValue ZeroElt = DAG.getConstant(0, DL, IntSVT);
        SDValue AllOnesElt = DAG.getAllOnesConstant(DL, IntSVT);
        SmallVector<SDValue, 16> AndMask(NumElts, DAG.getUNDEF(IntSVT));
        for (int I = 0; I != (int)NumElts; ++I)
          if (0 <= Mask[I])
            AndMask[I] = Mask[I] == I ? AllOnesElt : ZeroElt;

        // See if a clear mask is legal instead of going via
        // XformToShuffleWithZero which loses UNDEF mask elements.
        if (TLI.isVectorClearMaskLegal(ClearMask, IntVT))
          return DAG.getBitcast(
              VT, DAG.getVectorShuffle(IntVT, DL, DAG.getBitcast(IntVT, N0),
                                      DAG.getConstant(0, DL, IntVT), ClearMask));

        if (TLI.isOperationLegalOrCustom(ISD::AND, IntVT))
          return DAG.getBitcast(
              VT, DAG.getNode(ISD::AND, DL, IntVT, DAG.getBitcast(IntVT, N0),
                              DAG.getBuildVector(IntVT, DL, AndMask)));
      }
    }
  }

  // Attempt to combine a shuffle of 2 inputs of 'scalar sources' -
  // BUILD_VECTOR or SCALAR_TO_VECTOR into a single BUILD_VECTOR.
  if (Level < AfterLegalizeDAG && TLI.isTypeLegal(VT))
    if (SDValue Res = combineShuffleOfScalars(SVN, DAG, TLI))
      return Res;

  // If this shuffle only has a single input that is a bitcasted shuffle,
  // attempt to merge the 2 shuffles and suitably bitcast the inputs/output
  // back to their original types.
  if (N0.getOpcode() == ISD::BITCAST && N0.hasOneUse() &&
      N1.isUndef() && Level < AfterLegalizeVectorOps &&
      TLI.isTypeLegal(VT)) {

    SDValue BC0 = peekThroughOneUseBitcasts(N0);
    if (BC0.getOpcode() == ISD::VECTOR_SHUFFLE && BC0.hasOneUse()) {
      EVT SVT = VT.getScalarType();
      EVT InnerVT = BC0->getValueType(0);
      EVT InnerSVT = InnerVT.getScalarType();

      // Determine which shuffle works with the smaller scalar type.
      EVT ScaleVT = SVT.bitsLT(InnerSVT) ? VT : InnerVT;
      EVT ScaleSVT = ScaleVT.getScalarType();

      if (TLI.isTypeLegal(ScaleVT) &&
          0 == (InnerSVT.getSizeInBits() % ScaleSVT.getSizeInBits()) &&
          0 == (SVT.getSizeInBits() % ScaleSVT.getSizeInBits())) {
        int InnerScale = InnerSVT.getSizeInBits() / ScaleSVT.getSizeInBits();
        int OuterScale = SVT.getSizeInBits() / ScaleSVT.getSizeInBits();

        // Scale the shuffle masks to the smaller scalar type.
        ShuffleVectorSDNode *InnerSVN = cast<ShuffleVectorSDNode>(BC0);
        SmallVector<int, 8> InnerMask;
        SmallVector<int, 8> OuterMask;
        narrowShuffleMaskElts(InnerScale, InnerSVN->getMask(), InnerMask);
        narrowShuffleMaskElts(OuterScale, SVN->getMask(), OuterMask);

        // Merge the shuffle masks.
        SmallVector<int, 8> NewMask;
        for (int M : OuterMask)
          NewMask.push_back(M < 0 ? -1 : InnerMask[M]);

        // Test for shuffle mask legality over both commutations.
        SDValue SV0 = BC0->getOperand(0);
        SDValue SV1 = BC0->getOperand(1);
        bool LegalMask = TLI.isShuffleMaskLegal(NewMask, ScaleVT);
        if (!LegalMask) {
          std::swap(SV0, SV1);
          ShuffleVectorSDNode::commuteMask(NewMask);
          LegalMask = TLI.isShuffleMaskLegal(NewMask, ScaleVT);
        }

        if (LegalMask) {
          SV0 = DAG.getBitcast(ScaleVT, SV0);
          SV1 = DAG.getBitcast(ScaleVT, SV1);
          return DAG.getBitcast(
              VT, DAG.getVectorShuffle(ScaleVT, SDLoc(N), SV0, SV1, NewMask));
        }
      }
    }
  }

  // Match shuffles of bitcasts, so long as the mask can be treated as the
  // larger type.
  if (SDValue V = combineShuffleOfBitcast(SVN, DAG, TLI, LegalOperations))
    return V;

  // Compute the combined shuffle mask for a shuffle with SV0 as the first
  // operand, and SV1 as the second operand.
  // i.e. Merge SVN(OtherSVN, N1) -> shuffle(SV0, SV1, Mask) iff Commute = false
  //      Merge SVN(N1, OtherSVN) -> shuffle(SV0, SV1, Mask') iff Commute = true
  auto MergeInnerShuffle =
      [NumElts, &VT](bool Commute, ShuffleVectorSDNode *SVN,
                     ShuffleVectorSDNode *OtherSVN, SDValue N1,
                     const TargetLowering &TLI, SDValue &SV0, SDValue &SV1,
                     SmallVectorImpl<int> &Mask) -> bool {
    // Don't try to fold splats; they're likely to simplify somehow, or they
    // might be free.
    if (OtherSVN->isSplat())
      return false;

    SV0 = SV1 = SDValue();
    Mask.clear();

    for (unsigned i = 0; i != NumElts; ++i) {
      int Idx = SVN->getMaskElt(i);
      if (Idx < 0) {
        // Propagate Undef.
        Mask.push_back(Idx);
        continue;
      }

      if (Commute)
        Idx = (Idx < (int)NumElts) ? (Idx + NumElts) : (Idx - NumElts);

      SDValue CurrentVec;
      if (Idx < (int)NumElts) {
        // This shuffle index refers to the inner shuffle N0. Lookup the inner
        // shuffle mask to identify which vector is actually referenced.
        Idx = OtherSVN->getMaskElt(Idx);
        if (Idx < 0) {
          // Propagate Undef.
          Mask.push_back(Idx);
          continue;
        }
        CurrentVec = (Idx < (int)NumElts) ? OtherSVN->getOperand(0)
                                          : OtherSVN->getOperand(1);
      } else {
        // This shuffle index references an element within N1.
        CurrentVec = N1;
      }

      // Simple case where 'CurrentVec' is UNDEF.
      if (CurrentVec.isUndef()) {
        Mask.push_back(-1);
        continue;
      }

      // Canonicalize the shuffle index. We don't know yet if CurrentVec
      // will be the first or second operand of the combined shuffle.
      Idx = Idx % NumElts;
      if (!SV0.getNode() || SV0 == CurrentVec) {
        // Ok. CurrentVec is the left hand side.
        // Update the mask accordingly.
        SV0 = CurrentVec;
        Mask.push_back(Idx);
        continue;
      }
      if (!SV1.getNode() || SV1 == CurrentVec) {
        // Ok. CurrentVec is the right hand side.
        // Update the mask accordingly.
        SV1 = CurrentVec;
        Mask.push_back(Idx + NumElts);
        continue;
      }

      // Last chance - see if the vector is another shuffle and if it
      // uses one of the existing candidate shuffle ops.
      if (auto *CurrentSVN = dyn_cast<ShuffleVectorSDNode>(CurrentVec)) {
        int InnerIdx = CurrentSVN->getMaskElt(Idx);
        if (InnerIdx < 0) {
          Mask.push_back(-1);
          continue;
        }
        SDValue InnerVec = (InnerIdx < (int)NumElts)
                               ? CurrentSVN->getOperand(0)
                               : CurrentSVN->getOperand(1);
        if (InnerVec.isUndef()) {
          Mask.push_back(-1);
          continue;
        }
        InnerIdx %= NumElts;
        if (InnerVec == SV0) {
          Mask.push_back(InnerIdx);
          continue;
        }
        if (InnerVec == SV1) {
          Mask.push_back(InnerIdx + NumElts);
          continue;
        }
      }

      // Bail out if we cannot convert the shuffle pair into a single shuffle.
      return false;
    }

    if (llvm::all_of(Mask, [](int M) { return M < 0; }))
      return true;

    // Avoid introducing shuffles with illegal mask.
    //   shuffle(shuffle(A, B, M0), C, M1) -> shuffle(A, B, M2)
    //   shuffle(shuffle(A, B, M0), C, M1) -> shuffle(A, C, M2)
    //   shuffle(shuffle(A, B, M0), C, M1) -> shuffle(B, C, M2)
    //   shuffle(shuffle(A, B, M0), C, M1) -> shuffle(B, A, M2)
    //   shuffle(shuffle(A, B, M0), C, M1) -> shuffle(C, A, M2)
    //   shuffle(shuffle(A, B, M0), C, M1) -> shuffle(C, B, M2)
    if (TLI.isShuffleMaskLegal(Mask, VT))
      return true;

    std::swap(SV0, SV1);
    ShuffleVectorSDNode::commuteMask(Mask);
    return TLI.isShuffleMaskLegal(Mask, VT);
  };

  if (Level < AfterLegalizeDAG && TLI.isTypeLegal(VT)) {
    // Canonicalize shuffles according to rules:
    //  shuffle(A, shuffle(A, B)) -> shuffle(shuffle(A,B), A)
    //  shuffle(B, shuffle(A, B)) -> shuffle(shuffle(A,B), B)
    //  shuffle(B, shuffle(A, Undef)) -> shuffle(shuffle(A, Undef), B)
    if (N1.getOpcode() == ISD::VECTOR_SHUFFLE &&
        N0.getOpcode() != ISD::VECTOR_SHUFFLE) {
      // The incoming shuffle must be of the same type as the result of the
      // current shuffle.
      assert(N1->getOperand(0).getValueType() == VT &&
             "Shuffle types don't match");

      SDValue SV0 = N1->getOperand(0);
      SDValue SV1 = N1->getOperand(1);
      bool HasSameOp0 = N0 == SV0;
      bool IsSV1Undef = SV1.isUndef();
      if (HasSameOp0 || IsSV1Undef || N0 == SV1)
        // Commute the operands of this shuffle so merging below will trigger.
        return DAG.getCommutedVectorShuffle(*SVN);
    }

    // Canonicalize splat shuffles to the RHS to improve merging below.
    //  shuffle(splat(A,u), shuffle(C,D)) -> shuffle'(shuffle(C,D), splat(A,u))
    if (N0.getOpcode() == ISD::VECTOR_SHUFFLE &&
        N1.getOpcode() == ISD::VECTOR_SHUFFLE &&
        cast<ShuffleVectorSDNode>(N0)->isSplat() &&
        !cast<ShuffleVectorSDNode>(N1)->isSplat()) {
      return DAG.getCommutedVectorShuffle(*SVN);
    }

    // Try to fold according to rules:
    //   shuffle(shuffle(A, B, M0), C, M1) -> shuffle(A, B, M2)
    //   shuffle(shuffle(A, B, M0), C, M1) -> shuffle(A, C, M2)
    //   shuffle(shuffle(A, B, M0), C, M1) -> shuffle(B, C, M2)
    // Don't try to fold shuffles with illegal type.
    // Only fold if this shuffle is the only user of the other shuffle.
    // Try matching shuffle(C,shuffle(A,B)) commutted patterns as well.
    for (int i = 0; i != 2; ++i) {
      if (N->getOperand(i).getOpcode() == ISD::VECTOR_SHUFFLE &&
          N->isOnlyUserOf(N->getOperand(i).getNode())) {
        // The incoming shuffle must be of the same type as the result of the
        // current shuffle.
        auto *OtherSV = cast<ShuffleVectorSDNode>(N->getOperand(i));
        assert(OtherSV->getOperand(0).getValueType() == VT &&
               "Shuffle types don't match");

        SDValue SV0, SV1;
        SmallVector<int, 4> Mask;
        if (MergeInnerShuffle(i != 0, SVN, OtherSV, N->getOperand(1 - i), TLI,
                              SV0, SV1, Mask)) {
          // Check if all indices in Mask are Undef. In case, propagate Undef.
          if (llvm::all_of(Mask, [](int M) { return M < 0; }))
            return DAG.getUNDEF(VT);

          return DAG.getVectorShuffle(VT, SDLoc(N),
                                      SV0 ? SV0 : DAG.getUNDEF(VT),
                                      SV1 ? SV1 : DAG.getUNDEF(VT), Mask);
        }
      }
    }

    // Merge shuffles through binops if we are able to merge it with at least
    // one other shuffles.
    // shuffle(bop(shuffle(x,y),shuffle(z,w)),undef)
    // shuffle(bop(shuffle(x,y),shuffle(z,w)),bop(shuffle(a,b),shuffle(c,d)))
    unsigned SrcOpcode = N0.getOpcode();
    if (TLI.isBinOp(SrcOpcode) && N->isOnlyUserOf(N0.getNode()) &&
        (N1.isUndef() ||
         (SrcOpcode == N1.getOpcode() && N->isOnlyUserOf(N1.getNode())))) {
      // Get binop source ops, or just pass on the undef.
      SDValue Op00 = N0.getOperand(0);
      SDValue Op01 = N0.getOperand(1);
      SDValue Op10 = N1.isUndef() ? N1 : N1.getOperand(0);
      SDValue Op11 = N1.isUndef() ? N1 : N1.getOperand(1);
      // TODO: We might be able to relax the VT check but we don't currently
      // have any isBinOp() that has different result/ops VTs so play safe until
      // we have test coverage.
      if (Op00.getValueType() == VT && Op10.getValueType() == VT &&
          Op01.getValueType() == VT && Op11.getValueType() == VT &&
          (Op00.getOpcode() == ISD::VECTOR_SHUFFLE ||
           Op10.getOpcode() == ISD::VECTOR_SHUFFLE ||
           Op01.getOpcode() == ISD::VECTOR_SHUFFLE ||
           Op11.getOpcode() == ISD::VECTOR_SHUFFLE)) {
        auto CanMergeInnerShuffle = [&](SDValue &SV0, SDValue &SV1,
                                        SmallVectorImpl<int> &Mask, bool LeftOp,
                                        bool Commute) {
          SDValue InnerN = Commute ? N1 : N0;
          SDValue Op0 = LeftOp ? Op00 : Op01;
          SDValue Op1 = LeftOp ? Op10 : Op11;
          if (Commute)
            std::swap(Op0, Op1);
          // Only accept the merged shuffle if we don't introduce undef elements,
          // or the inner shuffle already contained undef elements.
          auto *SVN0 = dyn_cast<ShuffleVectorSDNode>(Op0);
          return SVN0 && InnerN->isOnlyUserOf(SVN0) &&
                 MergeInnerShuffle(Commute, SVN, SVN0, Op1, TLI, SV0, SV1,
                                   Mask) &&
                 (llvm::any_of(SVN0->getMask(), [](int M) { return M < 0; }) ||
                  llvm::none_of(Mask, [](int M) { return M < 0; }));
        };

        // Ensure we don't increase the number of shuffles - we must merge a
        // shuffle from at least one of the LHS and RHS ops.
        bool MergedLeft = false;
        SDValue LeftSV0, LeftSV1;
        SmallVector<int, 4> LeftMask;
        if (CanMergeInnerShuffle(LeftSV0, LeftSV1, LeftMask, true, false) ||
            CanMergeInnerShuffle(LeftSV0, LeftSV1, LeftMask, true, true)) {
          MergedLeft = true;
        } else {
          LeftMask.assign(SVN->getMask().begin(), SVN->getMask().end());
          LeftSV0 = Op00, LeftSV1 = Op10;
        }

        bool MergedRight = false;
        SDValue RightSV0, RightSV1;
        SmallVector<int, 4> RightMask;
        if (CanMergeInnerShuffle(RightSV0, RightSV1, RightMask, false, false) ||
            CanMergeInnerShuffle(RightSV0, RightSV1, RightMask, false, true)) {
          MergedRight = true;
        } else {
          RightMask.assign(SVN->getMask().begin(), SVN->getMask().end());
          RightSV0 = Op01, RightSV1 = Op11;
        }

        if (MergedLeft || MergedRight) {
          SDLoc DL(N);
          SDValue LHS = DAG.getVectorShuffle(
              VT, DL, LeftSV0 ? LeftSV0 : DAG.getUNDEF(VT),
              LeftSV1 ? LeftSV1 : DAG.getUNDEF(VT), LeftMask);
          SDValue RHS = DAG.getVectorShuffle(
              VT, DL, RightSV0 ? RightSV0 : DAG.getUNDEF(VT),
              RightSV1 ? RightSV1 : DAG.getUNDEF(VT), RightMask);
          return DAG.getNode(SrcOpcode, DL, VT, LHS, RHS);
        }
      }
    }
  }

  if (SDValue V = foldShuffleOfConcatUndefs(SVN, DAG))
    return V;

  // Match shuffles that can be converted to ISD::ZERO_EXTEND_VECTOR_INREG.
  // Perform this really late, because it could eliminate knowledge
  // of undef elements created by this shuffle.
  if (Level < AfterLegalizeTypes)
    if (SDValue V = combineShuffleToZeroExtendVectorInReg(SVN, DAG, TLI,
                                                          LegalOperations))
      return V;

  return SDValue();
}

SDValue DAGCombiner::visitSCALAR_TO_VECTOR(SDNode *N) {
  EVT VT = N->getValueType(0);
  if (!VT.isFixedLengthVector())
    return SDValue();

  // Try to convert a scalar binop with an extracted vector element to a vector
  // binop. This is intended to reduce potentially expensive register moves.
  // TODO: Check if both operands are extracted.
  // TODO: How to prefer scalar/vector ops with multiple uses of the extact?
  // TODO: Generalize this, so it can be called from visitINSERT_VECTOR_ELT().
  SDValue Scalar = N->getOperand(0);
  unsigned Opcode = Scalar.getOpcode();
  EVT VecEltVT = VT.getScalarType();
  if (Scalar.hasOneUse() && Scalar->getNumValues() == 1 &&
      TLI.isBinOp(Opcode) && Scalar.getValueType() == VecEltVT &&
      Scalar.getOperand(0).getValueType() == VecEltVT &&
      Scalar.getOperand(1).getValueType() == VecEltVT &&
      Scalar->isOnlyUserOf(Scalar.getOperand(0).getNode()) &&
      Scalar->isOnlyUserOf(Scalar.getOperand(1).getNode()) &&
      DAG.isSafeToSpeculativelyExecute(Opcode) && hasOperation(Opcode, VT)) {
    // Match an extract element and get a shuffle mask equivalent.
    SmallVector<int, 8> ShufMask(VT.getVectorNumElements(), -1);

    for (int i : {0, 1}) {
      // s2v (bo (extelt V, Idx), C) --> shuffle (bo V, C'), {Idx, -1, -1...}
      // s2v (bo C, (extelt V, Idx)) --> shuffle (bo C', V), {Idx, -1, -1...}
      SDValue EE = Scalar.getOperand(i);
      auto *C = dyn_cast<ConstantSDNode>(Scalar.getOperand(i ? 0 : 1));
      if (C && EE.getOpcode() == ISD::EXTRACT_VECTOR_ELT &&
          EE.getOperand(0).getValueType() == VT &&
          isa<ConstantSDNode>(EE.getOperand(1))) {
        // Mask = {ExtractIndex, undef, undef....}
        ShufMask[0] = EE.getConstantOperandVal(1);
        // Make sure the shuffle is legal if we are crossing lanes.
        if (TLI.isShuffleMaskLegal(ShufMask, VT)) {
          SDLoc DL(N);
          SDValue V[] = {EE.getOperand(0),
                         DAG.getConstant(C->getAPIntValue(), DL, VT)};
          SDValue VecBO = DAG.getNode(Opcode, DL, VT, V[i], V[1 - i]);
          return DAG.getVectorShuffle(VT, DL, VecBO, DAG.getUNDEF(VT),
                                      ShufMask);
        }
      }
    }
  }

  // Replace a SCALAR_TO_VECTOR(EXTRACT_VECTOR_ELT(V,C0)) pattern
  // with a VECTOR_SHUFFLE and possible truncate.
  if (Opcode != ISD::EXTRACT_VECTOR_ELT ||
      !Scalar.getOperand(0).getValueType().isFixedLengthVector())
    return SDValue();

  // If we have an implicit truncate, truncate here if it is legal.
  if (VecEltVT != Scalar.getValueType() &&
      Scalar.getValueType().isScalarInteger() && isTypeLegal(VecEltVT)) {
    SDValue Val = DAG.getNode(ISD::TRUNCATE, SDLoc(Scalar), VecEltVT, Scalar);
    return DAG.getNode(ISD::SCALAR_TO_VECTOR, SDLoc(N), VT, Val);
  }

  auto *ExtIndexC = dyn_cast<ConstantSDNode>(Scalar.getOperand(1));
  if (!ExtIndexC)
    return SDValue();

  SDValue SrcVec = Scalar.getOperand(0);
  EVT SrcVT = SrcVec.getValueType();
  unsigned SrcNumElts = SrcVT.getVectorNumElements();
  unsigned VTNumElts = VT.getVectorNumElements();
  if (VecEltVT == SrcVT.getScalarType() && VTNumElts <= SrcNumElts) {
    // Create a shuffle equivalent for scalar-to-vector: {ExtIndex, -1, -1, ...}
    SmallVector<int, 8> Mask(SrcNumElts, -1);
    Mask[0] = ExtIndexC->getZExtValue();
    SDValue LegalShuffle = TLI.buildLegalVectorShuffle(
        SrcVT, SDLoc(N), SrcVec, DAG.getUNDEF(SrcVT), Mask, DAG);
    if (!LegalShuffle)
      return SDValue();

    // If the initial vector is the same size, the shuffle is the result.
    if (VT == SrcVT)
      return LegalShuffle;

    // If not, shorten the shuffled vector.
    if (VTNumElts != SrcNumElts) {
      SDValue ZeroIdx = DAG.getVectorIdxConstant(0, SDLoc(N));
      EVT SubVT = EVT::getVectorVT(*DAG.getContext(),
                                   SrcVT.getVectorElementType(), VTNumElts);
      return DAG.getNode(ISD::EXTRACT_SUBVECTOR, SDLoc(N), SubVT, LegalShuffle,
                         ZeroIdx);
    }
  }

  return SDValue();
}

SDValue DAGCombiner::visitINSERT_SUBVECTOR(SDNode *N) {
  EVT VT = N->getValueType(0);
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue N2 = N->getOperand(2);
  uint64_t InsIdx = N->getConstantOperandVal(2);

  // If inserting an UNDEF, just return the original vector.
  if (N1.isUndef())
    return N0;

  // If this is an insert of an extracted vector into an undef vector, we can
  // just use the input to the extract if the types match, and can simplify
  // in some cases even if they don't.
  if (N0.isUndef() && N1.getOpcode() == ISD::EXTRACT_SUBVECTOR &&
      N1.getOperand(1) == N2) {
    EVT SrcVT = N1.getOperand(0).getValueType();
    if (SrcVT == VT)
      return N1.getOperand(0);
    // TODO: To remove the zero check, need to adjust the offset to
    // a multiple of the new src type.
    if (isNullConstant(N2)) {
      if (VT.knownBitsGE(SrcVT) &&
          !(VT.isFixedLengthVector() && SrcVT.isScalableVector()))
        return DAG.getNode(ISD::INSERT_SUBVECTOR, SDLoc(N),
                           VT, N0, N1.getOperand(0), N2);
      else if (VT.knownBitsLE(SrcVT) &&
               !(VT.isScalableVector() && SrcVT.isFixedLengthVector()))
        return DAG.getNode(ISD::EXTRACT_SUBVECTOR, SDLoc(N),
                           VT, N1.getOperand(0), N2);
    }
  }

  // Handle case where we've ended up inserting back into the source vector
  // we extracted the subvector from.
  // insert_subvector(N0, extract_subvector(N0, N2), N2) --> N0
  if (N1.getOpcode() == ISD::EXTRACT_SUBVECTOR && N1.getOperand(0) == N0 &&
      N1.getOperand(1) == N2)
    return N0;

  // Simplify scalar inserts into an undef vector:
  // insert_subvector undef, (splat X), N2 -> splat X
  if (N0.isUndef() && N1.getOpcode() == ISD::SPLAT_VECTOR)
    if (DAG.isConstantValueOfAnyType(N1.getOperand(0)) || N1.hasOneUse())
      return DAG.getNode(ISD::SPLAT_VECTOR, SDLoc(N), VT, N1.getOperand(0));

  // If we are inserting a bitcast value into an undef, with the same
  // number of elements, just use the bitcast input of the extract.
  // i.e. INSERT_SUBVECTOR UNDEF (BITCAST N1) N2 ->
  //        BITCAST (INSERT_SUBVECTOR UNDEF N1 N2)
  if (N0.isUndef() && N1.getOpcode() == ISD::BITCAST &&
      N1.getOperand(0).getOpcode() == ISD::EXTRACT_SUBVECTOR &&
      N1.getOperand(0).getOperand(1) == N2 &&
      N1.getOperand(0).getOperand(0).getValueType().getVectorElementCount() ==
          VT.getVectorElementCount() &&
      N1.getOperand(0).getOperand(0).getValueType().getSizeInBits() ==
          VT.getSizeInBits()) {
    return DAG.getBitcast(VT, N1.getOperand(0).getOperand(0));
  }

  // If both N1 and N2 are bitcast values on which insert_subvector
  // would makes sense, pull the bitcast through.
  // i.e. INSERT_SUBVECTOR (BITCAST N0) (BITCAST N1) N2 ->
  //        BITCAST (INSERT_SUBVECTOR N0 N1 N2)
  if (N0.getOpcode() == ISD::BITCAST && N1.getOpcode() == ISD::BITCAST) {
    SDValue CN0 = N0.getOperand(0);
    SDValue CN1 = N1.getOperand(0);
    EVT CN0VT = CN0.getValueType();
    EVT CN1VT = CN1.getValueType();
    if (CN0VT.isVector() && CN1VT.isVector() &&
        CN0VT.getVectorElementType() == CN1VT.getVectorElementType() &&
        CN0VT.getVectorElementCount() == VT.getVectorElementCount()) {
      SDValue NewINSERT = DAG.getNode(ISD::INSERT_SUBVECTOR, SDLoc(N),
                                      CN0.getValueType(), CN0, CN1, N2);
      return DAG.getBitcast(VT, NewINSERT);
    }
  }

  // Combine INSERT_SUBVECTORs where we are inserting to the same index.
  // INSERT_SUBVECTOR( INSERT_SUBVECTOR( Vec, SubOld, Idx ), SubNew, Idx )
  // --> INSERT_SUBVECTOR( Vec, SubNew, Idx )
  if (N0.getOpcode() == ISD::INSERT_SUBVECTOR &&
      N0.getOperand(1).getValueType() == N1.getValueType() &&
      N0.getOperand(2) == N2)
    return DAG.getNode(ISD::INSERT_SUBVECTOR, SDLoc(N), VT, N0.getOperand(0),
                       N1, N2);

  // Eliminate an intermediate insert into an undef vector:
  // insert_subvector undef, (insert_subvector undef, X, 0), 0 -->
  // insert_subvector undef, X, 0
  if (N0.isUndef() && N1.getOpcode() == ISD::INSERT_SUBVECTOR &&
      N1.getOperand(0).isUndef() && isNullConstant(N1.getOperand(2)) &&
      isNullConstant(N2))
    return DAG.getNode(ISD::INSERT_SUBVECTOR, SDLoc(N), VT, N0,
                       N1.getOperand(1), N2);

  // Push subvector bitcasts to the output, adjusting the index as we go.
  // insert_subvector(bitcast(v), bitcast(s), c1)
  // -> bitcast(insert_subvector(v, s, c2))
  if ((N0.isUndef() || N0.getOpcode() == ISD::BITCAST) &&
      N1.getOpcode() == ISD::BITCAST) {
    SDValue N0Src = peekThroughBitcasts(N0);
    SDValue N1Src = peekThroughBitcasts(N1);
    EVT N0SrcSVT = N0Src.getValueType().getScalarType();
    EVT N1SrcSVT = N1Src.getValueType().getScalarType();
    if ((N0.isUndef() || N0SrcSVT == N1SrcSVT) &&
        N0Src.getValueType().isVector() && N1Src.getValueType().isVector()) {
      EVT NewVT;
      SDLoc DL(N);
      SDValue NewIdx;
      LLVMContext &Ctx = *DAG.getContext();
      ElementCount NumElts = VT.getVectorElementCount();
      unsigned EltSizeInBits = VT.getScalarSizeInBits();
      if ((EltSizeInBits % N1SrcSVT.getSizeInBits()) == 0) {
        unsigned Scale = EltSizeInBits / N1SrcSVT.getSizeInBits();
        NewVT = EVT::getVectorVT(Ctx, N1SrcSVT, NumElts * Scale);
        NewIdx = DAG.getVectorIdxConstant(InsIdx * Scale, DL);
      } else if ((N1SrcSVT.getSizeInBits() % EltSizeInBits) == 0) {
        unsigned Scale = N1SrcSVT.getSizeInBits() / EltSizeInBits;
        if (NumElts.isKnownMultipleOf(Scale) && (InsIdx % Scale) == 0) {
          NewVT = EVT::getVectorVT(Ctx, N1SrcSVT,
                                   NumElts.divideCoefficientBy(Scale));
          NewIdx = DAG.getVectorIdxConstant(InsIdx / Scale, DL);
        }
      }
      if (NewIdx && hasOperation(ISD::INSERT_SUBVECTOR, NewVT)) {
        SDValue Res = DAG.getBitcast(NewVT, N0Src);
        Res = DAG.getNode(ISD::INSERT_SUBVECTOR, DL, NewVT, Res, N1Src, NewIdx);
        return DAG.getBitcast(VT, Res);
      }
    }
  }

  // Canonicalize insert_subvector dag nodes.
  // Example:
  // (insert_subvector (insert_subvector A, Idx0), Idx1)
  // -> (insert_subvector (insert_subvector A, Idx1), Idx0)
  if (N0.getOpcode() == ISD::INSERT_SUBVECTOR && N0.hasOneUse() &&
      N1.getValueType() == N0.getOperand(1).getValueType()) {
    unsigned OtherIdx = N0.getConstantOperandVal(2);
    if (InsIdx < OtherIdx) {
      // Swap nodes.
      SDValue NewOp = DAG.getNode(ISD::INSERT_SUBVECTOR, SDLoc(N), VT,
                                  N0.getOperand(0), N1, N2);
      AddToWorklist(NewOp.getNode());
      return DAG.getNode(ISD::INSERT_SUBVECTOR, SDLoc(N0.getNode()),
                         VT, NewOp, N0.getOperand(1), N0.getOperand(2));
    }
  }

  // If the input vector is a concatenation, and the insert replaces
  // one of the pieces, we can optimize into a single concat_vectors.
  if (N0.getOpcode() == ISD::CONCAT_VECTORS && N0.hasOneUse() &&
      N0.getOperand(0).getValueType() == N1.getValueType() &&
      N0.getOperand(0).getValueType().isScalableVector() ==
          N1.getValueType().isScalableVector()) {
    unsigned Factor = N1.getValueType().getVectorMinNumElements();
    SmallVector<SDValue, 8> Ops(N0->ops());
    Ops[InsIdx / Factor] = N1;
    return DAG.getNode(ISD::CONCAT_VECTORS, SDLoc(N), VT, Ops);
  }

  // Simplify source operands based on insertion.
  if (SimplifyDemandedVectorElts(SDValue(N, 0)))
    return SDValue(N, 0);

  return SDValue();
}

SDValue DAGCombiner::visitFP_TO_FP16(SDNode *N) {
  SDValue N0 = N->getOperand(0);

  // fold (fp_to_fp16 (fp16_to_fp op)) -> op
  if (N0->getOpcode() == ISD::FP16_TO_FP)
    return N0->getOperand(0);

  return SDValue();
}

SDValue DAGCombiner::visitFP16_TO_FP(SDNode *N) {
  auto Op = N->getOpcode();
  assert((Op == ISD::FP16_TO_FP || Op == ISD::BF16_TO_FP) &&
         "opcode should be FP16_TO_FP or BF16_TO_FP.");
  SDValue N0 = N->getOperand(0);

  // fold fp16_to_fp(op & 0xffff) -> fp16_to_fp(op) or
  // fold bf16_to_fp(op & 0xffff) -> bf16_to_fp(op)
  if (!TLI.shouldKeepZExtForFP16Conv() && N0->getOpcode() == ISD::AND) {
    ConstantSDNode *AndConst = getAsNonOpaqueConstant(N0.getOperand(1));
    if (AndConst && AndConst->getAPIntValue() == 0xffff) {
      return DAG.getNode(Op, SDLoc(N), N->getValueType(0), N0.getOperand(0));
    }
  }

  // Sometimes constants manage to survive very late in the pipeline, e.g.,
  // because they are wrapped inside the <1 x f16> type. Try one last time to
  // get rid of them.
  SDValue Folded = DAG.FoldConstantArithmetic(N->getOpcode(), SDLoc(N),
                                              N->getValueType(0), {N0});
  return Folded;
}

SDValue DAGCombiner::visitFP_TO_BF16(SDNode *N) {
  SDValue N0 = N->getOperand(0);

  // fold (fp_to_bf16 (bf16_to_fp op)) -> op
  if (N0->getOpcode() == ISD::BF16_TO_FP)
    return N0->getOperand(0);

  return SDValue();
}

SDValue DAGCombiner::visitBF16_TO_FP(SDNode *N) {
  // fold bf16_to_fp(op & 0xffff) -> bf16_to_fp(op)
  return visitFP16_TO_FP(N);
}

SDValue DAGCombiner::visitVECREDUCE(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N0.getValueType();
  unsigned Opcode = N->getOpcode();

  // VECREDUCE over 1-element vector is just an extract.
  if (VT.getVectorElementCount().isScalar()) {
    SDLoc dl(N);
    SDValue Res =
        DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, VT.getVectorElementType(), N0,
                    DAG.getVectorIdxConstant(0, dl));
    if (Res.getValueType() != N->getValueType(0))
      Res = DAG.getNode(ISD::ANY_EXTEND, dl, N->getValueType(0), Res);
    return Res;
  }

  // On an boolean vector an and/or reduction is the same as a umin/umax
  // reduction. Convert them if the latter is legal while the former isn't.
  if (Opcode == ISD::VECREDUCE_AND || Opcode == ISD::VECREDUCE_OR) {
    unsigned NewOpcode = Opcode == ISD::VECREDUCE_AND
        ? ISD::VECREDUCE_UMIN : ISD::VECREDUCE_UMAX;
    if (!TLI.isOperationLegalOrCustom(Opcode, VT) &&
        TLI.isOperationLegalOrCustom(NewOpcode, VT) &&
        DAG.ComputeNumSignBits(N0) == VT.getScalarSizeInBits())
      return DAG.getNode(NewOpcode, SDLoc(N), N->getValueType(0), N0);
  }

  // vecreduce_or(insert_subvector(zero or undef, val)) -> vecreduce_or(val)
  // vecreduce_and(insert_subvector(ones or undef, val)) -> vecreduce_and(val)
  if (N0.getOpcode() == ISD::INSERT_SUBVECTOR &&
      TLI.isTypeLegal(N0.getOperand(1).getValueType())) {
    SDValue Vec = N0.getOperand(0);
    SDValue Subvec = N0.getOperand(1);
    if ((Opcode == ISD::VECREDUCE_OR &&
         (N0.getOperand(0).isUndef() || isNullOrNullSplat(Vec))) ||
        (Opcode == ISD::VECREDUCE_AND &&
         (N0.getOperand(0).isUndef() || isAllOnesOrAllOnesSplat(Vec))))
      return DAG.getNode(Opcode, SDLoc(N), N->getValueType(0), Subvec);
  }

  // vecreduce_or(sext(x)) -> sext(vecreduce_or(x))
  // Same for zext and anyext, and for and/or/xor reductions.
  if ((Opcode == ISD::VECREDUCE_OR || Opcode == ISD::VECREDUCE_AND ||
       Opcode == ISD::VECREDUCE_XOR) &&
      (N0.getOpcode() == ISD::SIGN_EXTEND ||
       N0.getOpcode() == ISD::ZERO_EXTEND ||
       N0.getOpcode() == ISD::ANY_EXTEND) &&
      TLI.isOperationLegalOrCustom(Opcode, N0.getOperand(0).getValueType())) {
    SDValue Red = DAG.getNode(Opcode, SDLoc(N),
                              N0.getOperand(0).getValueType().getScalarType(),
                              N0.getOperand(0));
    return DAG.getNode(N0.getOpcode(), SDLoc(N), N->getValueType(0), Red);
  }
  return SDValue();
}

SDValue DAGCombiner::visitVP_FSUB(SDNode *N) {
  SelectionDAG::FlagInserter FlagsInserter(DAG, N);

  // FSUB -> FMA combines:
  if (SDValue Fused = visitFSUBForFMACombine<VPMatchContext>(N)) {
    AddToWorklist(Fused.getNode());
    return Fused;
  }
  return SDValue();
}

SDValue DAGCombiner::visitVPOp(SDNode *N) {

  if (N->getOpcode() == ISD::VP_GATHER)
    if (SDValue SD = visitVPGATHER(N))
      return SD;

  if (N->getOpcode() == ISD::VP_SCATTER)
    if (SDValue SD = visitVPSCATTER(N))
      return SD;

  if (N->getOpcode() == ISD::EXPERIMENTAL_VP_STRIDED_LOAD)
    if (SDValue SD = visitVP_STRIDED_LOAD(N))
      return SD;

  if (N->getOpcode() == ISD::EXPERIMENTAL_VP_STRIDED_STORE)
    if (SDValue SD = visitVP_STRIDED_STORE(N))
      return SD;

  // VP operations in which all vector elements are disabled - either by
  // determining that the mask is all false or that the EVL is 0 - can be
  // eliminated.
  bool AreAllEltsDisabled = false;
  if (auto EVLIdx = ISD::getVPExplicitVectorLengthIdx(N->getOpcode()))
    AreAllEltsDisabled |= isNullConstant(N->getOperand(*EVLIdx));
  if (auto MaskIdx = ISD::getVPMaskIdx(N->getOpcode()))
    AreAllEltsDisabled |=
        ISD::isConstantSplatVectorAllZeros(N->getOperand(*MaskIdx).getNode());

  // This is the only generic VP combine we support for now.
  if (!AreAllEltsDisabled) {
    switch (N->getOpcode()) {
    case ISD::VP_FADD:
      return visitVP_FADD(N);
    case ISD::VP_FSUB:
      return visitVP_FSUB(N);
    case ISD::VP_FMA:
      return visitFMA<VPMatchContext>(N);
    case ISD::VP_SELECT:
      return visitVP_SELECT(N);
    case ISD::VP_MUL:
      return visitMUL<VPMatchContext>(N);
    case ISD::VP_SUB:
      return foldSubCtlzNot<VPMatchContext>(N, DAG);
    default:
      break;
    }
    return SDValue();
  }

  // Binary operations can be replaced by UNDEF.
  if (ISD::isVPBinaryOp(N->getOpcode()))
    return DAG.getUNDEF(N->getValueType(0));

  // VP Memory operations can be replaced by either the chain (stores) or the
  // chain + undef (loads).
  if (const auto *MemSD = dyn_cast<MemSDNode>(N)) {
    if (MemSD->writeMem())
      return MemSD->getChain();
    return CombineTo(N, DAG.getUNDEF(N->getValueType(0)), MemSD->getChain());
  }

  // Reduction operations return the start operand when no elements are active.
  if (ISD::isVPReduction(N->getOpcode()))
    return N->getOperand(0);

  return SDValue();
}

SDValue DAGCombiner::visitGET_FPENV_MEM(SDNode *N) {
  SDValue Chain = N->getOperand(0);
  SDValue Ptr = N->getOperand(1);
  EVT MemVT = cast<FPStateAccessSDNode>(N)->getMemoryVT();

  // Check if the memory, where FP state is written to, is used only in a single
  // load operation.
  LoadSDNode *LdNode = nullptr;
  for (auto *U : Ptr->uses()) {
    if (U == N)
      continue;
    if (auto *Ld = dyn_cast<LoadSDNode>(U)) {
      if (LdNode && LdNode != Ld)
        return SDValue();
      LdNode = Ld;
      continue;
    }
    return SDValue();
  }
  if (!LdNode || !LdNode->isSimple() || LdNode->isIndexed() ||
      !LdNode->getOffset().isUndef() || LdNode->getMemoryVT() != MemVT ||
      !LdNode->getChain().reachesChainWithoutSideEffects(SDValue(N, 0)))
    return SDValue();

  // Check if the loaded value is used only in a store operation.
  StoreSDNode *StNode = nullptr;
  for (auto I = LdNode->use_begin(), E = LdNode->use_end(); I != E; ++I) {
    SDUse &U = I.getUse();
    if (U.getResNo() == 0) {
      if (auto *St = dyn_cast<StoreSDNode>(U.getUser())) {
        if (StNode)
          return SDValue();
        StNode = St;
      } else {
        return SDValue();
      }
    }
  }
  if (!StNode || !StNode->isSimple() || StNode->isIndexed() ||
      !StNode->getOffset().isUndef() || StNode->getMemoryVT() != MemVT ||
      !StNode->getChain().reachesChainWithoutSideEffects(SDValue(LdNode, 1)))
    return SDValue();

  // Create new node GET_FPENV_MEM, which uses the store address to write FP
  // environment.
  SDValue Res = DAG.getGetFPEnv(Chain, SDLoc(N), StNode->getBasePtr(), MemVT,
                                StNode->getMemOperand());
  CombineTo(StNode, Res, false);
  return Res;
}

SDValue DAGCombiner::visitSET_FPENV_MEM(SDNode *N) {
  SDValue Chain = N->getOperand(0);
  SDValue Ptr = N->getOperand(1);
  EVT MemVT = cast<FPStateAccessSDNode>(N)->getMemoryVT();

  // Check if the address of FP state is used also in a store operation only.
  StoreSDNode *StNode = nullptr;
  for (auto *U : Ptr->uses()) {
    if (U == N)
      continue;
    if (auto *St = dyn_cast<StoreSDNode>(U)) {
      if (StNode && StNode != St)
        return SDValue();
      StNode = St;
      continue;
    }
    return SDValue();
  }
  if (!StNode || !StNode->isSimple() || StNode->isIndexed() ||
      !StNode->getOffset().isUndef() || StNode->getMemoryVT() != MemVT ||
      !Chain.reachesChainWithoutSideEffects(SDValue(StNode, 0)))
    return SDValue();

  // Check if the stored value is loaded from some location and the loaded
  // value is used only in the store operation.
  SDValue StValue = StNode->getValue();
  auto *LdNode = dyn_cast<LoadSDNode>(StValue);
  if (!LdNode || !LdNode->isSimple() || LdNode->isIndexed() ||
      !LdNode->getOffset().isUndef() || LdNode->getMemoryVT() != MemVT ||
      !StNode->getChain().reachesChainWithoutSideEffects(SDValue(LdNode, 1)))
    return SDValue();

  // Create new node SET_FPENV_MEM, which uses the load address to read FP
  // environment.
  SDValue Res =
      DAG.getSetFPEnv(LdNode->getChain(), SDLoc(N), LdNode->getBasePtr(), MemVT,
                      LdNode->getMemOperand());
  return Res;
}

/// Returns a vector_shuffle if it able to transform an AND to a vector_shuffle
/// with the destination vector and a zero vector.
/// e.g. AND V, <0xffffffff, 0, 0xffffffff, 0>. ==>
///      vector_shuffle V, Zero, <0, 4, 2, 4>
SDValue DAGCombiner::XformToShuffleWithZero(SDNode *N) {
  assert(N->getOpcode() == ISD::AND && "Unexpected opcode!");

  EVT VT = N->getValueType(0);
  SDValue LHS = N->getOperand(0);
  SDValue RHS = peekThroughBitcasts(N->getOperand(1));
  SDLoc DL(N);

  // Make sure we're not running after operation legalization where it
  // may have custom lowered the vector shuffles.
  if (LegalOperations)
    return SDValue();

  if (RHS.getOpcode() != ISD::BUILD_VECTOR)
    return SDValue();

  EVT RVT = RHS.getValueType();
  unsigned NumElts = RHS.getNumOperands();

  // Attempt to create a valid clear mask, splitting the mask into
  // sub elements and checking to see if each is
  // all zeros or all ones - suitable for shuffle masking.
  auto BuildClearMask = [&](int Split) {
    int NumSubElts = NumElts * Split;
    int NumSubBits = RVT.getScalarSizeInBits() / Split;

    SmallVector<int, 8> Indices;
    for (int i = 0; i != NumSubElts; ++i) {
      int EltIdx = i / Split;
      int SubIdx = i % Split;
      SDValue Elt = RHS.getOperand(EltIdx);
      // X & undef --> 0 (not undef). So this lane must be converted to choose
      // from the zero constant vector (same as if the element had all 0-bits).
      if (Elt.isUndef()) {
        Indices.push_back(i + NumSubElts);
        continue;
      }

      APInt Bits;
      if (auto *Cst = dyn_cast<ConstantSDNode>(Elt))
        Bits = Cst->getAPIntValue();
      else if (auto *CstFP = dyn_cast<ConstantFPSDNode>(Elt))
        Bits = CstFP->getValueAPF().bitcastToAPInt();
      else
        return SDValue();

      // Extract the sub element from the constant bit mask.
      if (DAG.getDataLayout().isBigEndian())
        Bits = Bits.extractBits(NumSubBits, (Split - SubIdx - 1) * NumSubBits);
      else
        Bits = Bits.extractBits(NumSubBits, SubIdx * NumSubBits);

      if (Bits.isAllOnes())
        Indices.push_back(i);
      else if (Bits == 0)
        Indices.push_back(i + NumSubElts);
      else
        return SDValue();
    }

    // Let's see if the target supports this vector_shuffle.
    EVT ClearSVT = EVT::getIntegerVT(*DAG.getContext(), NumSubBits);
    EVT ClearVT = EVT::getVectorVT(*DAG.getContext(), ClearSVT, NumSubElts);
    if (!TLI.isVectorClearMaskLegal(Indices, ClearVT))
      return SDValue();

    SDValue Zero = DAG.getConstant(0, DL, ClearVT);
    return DAG.getBitcast(VT, DAG.getVectorShuffle(ClearVT, DL,
                                                   DAG.getBitcast(ClearVT, LHS),
                                                   Zero, Indices));
  };

  // Determine maximum split level (byte level masking).
  int MaxSplit = 1;
  if (RVT.getScalarSizeInBits() % 8 == 0)
    MaxSplit = RVT.getScalarSizeInBits() / 8;

  for (int Split = 1; Split <= MaxSplit; ++Split)
    if (RVT.getScalarSizeInBits() % Split == 0)
      if (SDValue S = BuildClearMask(Split))
        return S;

  return SDValue();
}

/// If a vector binop is performed on splat values, it may be profitable to
/// extract, scalarize, and insert/splat.
static SDValue scalarizeBinOpOfSplats(SDNode *N, SelectionDAG &DAG,
                                      const SDLoc &DL, bool LegalTypes) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  unsigned Opcode = N->getOpcode();
  EVT VT = N->getValueType(0);
  EVT EltVT = VT.getVectorElementType();
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();

  // TODO: Remove/replace the extract cost check? If the elements are available
  //       as scalars, then there may be no extract cost. Should we ask if
  //       inserting a scalar back into a vector is cheap instead?
  int Index0, Index1;
  SDValue Src0 = DAG.getSplatSourceVector(N0, Index0);
  SDValue Src1 = DAG.getSplatSourceVector(N1, Index1);
  // Extract element from splat_vector should be free.
  // TODO: use DAG.isSplatValue instead?
  bool IsBothSplatVector = N0.getOpcode() == ISD::SPLAT_VECTOR &&
                           N1.getOpcode() == ISD::SPLAT_VECTOR;
  if (!Src0 || !Src1 || Index0 != Index1 ||
      Src0.getValueType().getVectorElementType() != EltVT ||
      Src1.getValueType().getVectorElementType() != EltVT ||
      !(IsBothSplatVector || TLI.isExtractVecEltCheap(VT, Index0)) ||
      // If before type legalization, allow scalar types that will eventually be
      // made legal.
      !TLI.isOperationLegalOrCustom(
          Opcode, LegalTypes
                      ? EltVT
                      : TLI.getTypeToTransformTo(*DAG.getContext(), EltVT)))
    return SDValue();

  // FIXME: Type legalization can't handle illegal MULHS/MULHU.
  if ((Opcode == ISD::MULHS || Opcode == ISD::MULHU) && !TLI.isTypeLegal(EltVT))
    return SDValue();

  SDValue IndexC = DAG.getVectorIdxConstant(Index0, DL);
  SDValue X = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, EltVT, Src0, IndexC);
  SDValue Y = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, EltVT, Src1, IndexC);
  SDValue ScalarBO = DAG.getNode(Opcode, DL, EltVT, X, Y, N->getFlags());

  // If all lanes but 1 are undefined, no need to splat the scalar result.
  // TODO: Keep track of undefs and use that info in the general case.
  if (N0.getOpcode() == ISD::BUILD_VECTOR && N0.getOpcode() == N1.getOpcode() &&
      count_if(N0->ops(), [](SDValue V) { return !V.isUndef(); }) == 1 &&
      count_if(N1->ops(), [](SDValue V) { return !V.isUndef(); }) == 1) {
    // bo (build_vec ..undef, X, undef...), (build_vec ..undef, Y, undef...) -->
    // build_vec ..undef, (bo X, Y), undef...
    SmallVector<SDValue, 8> Ops(VT.getVectorNumElements(), DAG.getUNDEF(EltVT));
    Ops[Index0] = ScalarBO;
    return DAG.getBuildVector(VT, DL, Ops);
  }

  // bo (splat X, Index), (splat Y, Index) --> splat (bo X, Y), Index
  return DAG.getSplat(VT, DL, ScalarBO);
}

/// Visit a vector cast operation, like FP_EXTEND.
SDValue DAGCombiner::SimplifyVCastOp(SDNode *N, const SDLoc &DL) {
  EVT VT = N->getValueType(0);
  assert(VT.isVector() && "SimplifyVCastOp only works on vectors!");
  EVT EltVT = VT.getVectorElementType();
  unsigned Opcode = N->getOpcode();

  SDValue N0 = N->getOperand(0);
  const TargetLowering &TLI = DAG.getTargetLoweringInfo();

  // TODO: promote operation might be also good here?
  int Index0;
  SDValue Src0 = DAG.getSplatSourceVector(N0, Index0);
  if (Src0 &&
      (N0.getOpcode() == ISD::SPLAT_VECTOR ||
       TLI.isExtractVecEltCheap(VT, Index0)) &&
      TLI.isOperationLegalOrCustom(Opcode, EltVT) &&
      TLI.preferScalarizeSplat(N)) {
    EVT SrcVT = N0.getValueType();
    EVT SrcEltVT = SrcVT.getVectorElementType();
    SDValue IndexC = DAG.getVectorIdxConstant(Index0, DL);
    SDValue Elt =
        DAG.getNode(ISD::EXTRACT_VECTOR_ELT, DL, SrcEltVT, Src0, IndexC);
    SDValue ScalarBO = DAG.getNode(Opcode, DL, EltVT, Elt, N->getFlags());
    if (VT.isScalableVector())
      return DAG.getSplatVector(VT, DL, ScalarBO);
    SmallVector<SDValue, 8> Ops(VT.getVectorNumElements(), ScalarBO);
    return DAG.getBuildVector(VT, DL, Ops);
  }

  return SDValue();
}

/// Visit a binary vector operation, like ADD.
SDValue DAGCombiner::SimplifyVBinOp(SDNode *N, const SDLoc &DL) {
  EVT VT = N->getValueType(0);
  assert(VT.isVector() && "SimplifyVBinOp only works on vectors!");

  SDValue LHS = N->getOperand(0);
  SDValue RHS = N->getOperand(1);
  unsigned Opcode = N->getOpcode();
  SDNodeFlags Flags = N->getFlags();

  // Move unary shuffles with identical masks after a vector binop:
  // VBinOp (shuffle A, Undef, Mask), (shuffle B, Undef, Mask))
  //   --> shuffle (VBinOp A, B), Undef, Mask
  // This does not require type legality checks because we are creating the
  // same types of operations that are in the original sequence. We do have to
  // restrict ops like integer div that have immediate UB (eg, div-by-zero)
  // though. This code is adapted from the identical transform in instcombine.
  if (DAG.isSafeToSpeculativelyExecute(Opcode)) {
    auto *Shuf0 = dyn_cast<ShuffleVectorSDNode>(LHS);
    auto *Shuf1 = dyn_cast<ShuffleVectorSDNode>(RHS);
    if (Shuf0 && Shuf1 && Shuf0->getMask().equals(Shuf1->getMask()) &&
        LHS.getOperand(1).isUndef() && RHS.getOperand(1).isUndef() &&
        (LHS.hasOneUse() || RHS.hasOneUse() || LHS == RHS)) {
      SDValue NewBinOp = DAG.getNode(Opcode, DL, VT, LHS.getOperand(0),
                                     RHS.getOperand(0), Flags);
      SDValue UndefV = LHS.getOperand(1);
      return DAG.getVectorShuffle(VT, DL, NewBinOp, UndefV, Shuf0->getMask());
    }

    // Try to sink a splat shuffle after a binop with a uniform constant.
    // This is limited to cases where neither the shuffle nor the constant have
    // undefined elements because that could be poison-unsafe or inhibit
    // demanded elements analysis. It is further limited to not change a splat
    // of an inserted scalar because that may be optimized better by
    // load-folding or other target-specific behaviors.
    if (isConstOrConstSplat(RHS) && Shuf0 && all_equal(Shuf0->getMask()) &&
        Shuf0->hasOneUse() && Shuf0->getOperand(1).isUndef() &&
        Shuf0->getOperand(0).getOpcode() != ISD::INSERT_VECTOR_ELT) {
      // binop (splat X), (splat C) --> splat (binop X, C)
      SDValue X = Shuf0->getOperand(0);
      SDValue NewBinOp = DAG.getNode(Opcode, DL, VT, X, RHS, Flags);
      return DAG.getVectorShuffle(VT, DL, NewBinOp, DAG.getUNDEF(VT),
                                  Shuf0->getMask());
    }
    if (isConstOrConstSplat(LHS) && Shuf1 && all_equal(Shuf1->getMask()) &&
        Shuf1->hasOneUse() && Shuf1->getOperand(1).isUndef() &&
        Shuf1->getOperand(0).getOpcode() != ISD::INSERT_VECTOR_ELT) {
      // binop (splat C), (splat X) --> splat (binop C, X)
      SDValue X = Shuf1->getOperand(0);
      SDValue NewBinOp = DAG.getNode(Opcode, DL, VT, LHS, X, Flags);
      return DAG.getVectorShuffle(VT, DL, NewBinOp, DAG.getUNDEF(VT),
                                  Shuf1->getMask());
    }
  }

  // The following pattern is likely to emerge with vector reduction ops. Moving
  // the binary operation ahead of insertion may allow using a narrower vector
  // instruction that has better performance than the wide version of the op:
  // VBinOp (ins undef, X, Z), (ins undef, Y, Z) --> ins VecC, (VBinOp X, Y), Z
  if (LHS.getOpcode() == ISD::INSERT_SUBVECTOR && LHS.getOperand(0).isUndef() &&
      RHS.getOpcode() == ISD::INSERT_SUBVECTOR && RHS.getOperand(0).isUndef() &&
      LHS.getOperand(2) == RHS.getOperand(2) &&
      (LHS.hasOneUse() || RHS.hasOneUse())) {
    SDValue X = LHS.getOperand(1);
    SDValue Y = RHS.getOperand(1);
    SDValue Z = LHS.getOperand(2);
    EVT NarrowVT = X.getValueType();
    if (NarrowVT == Y.getValueType() &&
        TLI.isOperationLegalOrCustomOrPromote(Opcode, NarrowVT,
                                              LegalOperations)) {
      // (binop undef, undef) may not return undef, so compute that result.
      SDValue VecC =
          DAG.getNode(Opcode, DL, VT, DAG.getUNDEF(VT), DAG.getUNDEF(VT));
      SDValue NarrowBO = DAG.getNode(Opcode, DL, NarrowVT, X, Y);
      return DAG.getNode(ISD::INSERT_SUBVECTOR, DL, VT, VecC, NarrowBO, Z);
    }
  }

  // Make sure all but the first op are undef or constant.
  auto ConcatWithConstantOrUndef = [](SDValue Concat) {
    return Concat.getOpcode() == ISD::CONCAT_VECTORS &&
           all_of(drop_begin(Concat->ops()), [](const SDValue &Op) {
             return Op.isUndef() ||
                    ISD::isBuildVectorOfConstantSDNodes(Op.getNode());
           });
  };

  // The following pattern is likely to emerge with vector reduction ops. Moving
  // the binary operation ahead of the concat may allow using a narrower vector
  // instruction that has better performance than the wide version of the op:
  // VBinOp (concat X, undef/constant), (concat Y, undef/constant) -->
  //   concat (VBinOp X, Y), VecC
  if (ConcatWithConstantOrUndef(LHS) && ConcatWithConstantOrUndef(RHS) &&
      (LHS.hasOneUse() || RHS.hasOneUse())) {
    EVT NarrowVT = LHS.getOperand(0).getValueType();
    if (NarrowVT == RHS.getOperand(0).getValueType() &&
        TLI.isOperationLegalOrCustomOrPromote(Opcode, NarrowVT)) {
      unsigned NumOperands = LHS.getNumOperands();
      SmallVector<SDValue, 4> ConcatOps;
      for (unsigned i = 0; i != NumOperands; ++i) {
        // This constant fold for operands 1 and up.
        ConcatOps.push_back(DAG.getNode(Opcode, DL, NarrowVT, LHS.getOperand(i),
                                        RHS.getOperand(i)));
      }

      return DAG.getNode(ISD::CONCAT_VECTORS, DL, VT, ConcatOps);
    }
  }

  if (SDValue V = scalarizeBinOpOfSplats(N, DAG, DL, LegalTypes))
    return V;

  return SDValue();
}

SDValue DAGCombiner::SimplifySelect(const SDLoc &DL, SDValue N0, SDValue N1,
                                    SDValue N2) {
  assert(N0.getOpcode() == ISD::SETCC &&
         "First argument must be a SetCC node!");

  SDValue SCC = SimplifySelectCC(DL, N0.getOperand(0), N0.getOperand(1), N1, N2,
                                 cast<CondCodeSDNode>(N0.getOperand(2))->get());

  // If we got a simplified select_cc node back from SimplifySelectCC, then
  // break it down into a new SETCC node, and a new SELECT node, and then return
  // the SELECT node, since we were called with a SELECT node.
  if (SCC.getNode()) {
    // Check to see if we got a select_cc back (to turn into setcc/select).
    // Otherwise, just return whatever node we got back, like fabs.
    if (SCC.getOpcode() == ISD::SELECT_CC) {
      const SDNodeFlags Flags = N0->getFlags();
      SDValue SETCC = DAG.getNode(ISD::SETCC, SDLoc(N0),
                                  N0.getValueType(),
                                  SCC.getOperand(0), SCC.getOperand(1),
                                  SCC.getOperand(4), Flags);
      AddToWorklist(SETCC.getNode());
      SDValue SelectNode = DAG.getSelect(SDLoc(SCC), SCC.getValueType(), SETCC,
                                         SCC.getOperand(2), SCC.getOperand(3));
      SelectNode->setFlags(Flags);
      return SelectNode;
    }

    return SCC;
  }
  return SDValue();
}

/// Given a SELECT or a SELECT_CC node, where LHS and RHS are the two values
/// being selected between, see if we can simplify the select.  Callers of this
/// should assume that TheSelect is deleted if this returns true.  As such, they
/// should return the appropriate thing (e.g. the node) back to the top-level of
/// the DAG combiner loop to avoid it being looked at.
bool DAGCombiner::SimplifySelectOps(SDNode *TheSelect, SDValue LHS,
                                    SDValue RHS) {
  // fold (select (setcc x, [+-]0.0, *lt), NaN, (fsqrt x))
  // The select + setcc is redundant, because fsqrt returns NaN for X < 0.
  if (const ConstantFPSDNode *NaN = isConstOrConstSplatFP(LHS)) {
    if (NaN->isNaN() && RHS.getOpcode() == ISD::FSQRT) {
      // We have: (select (setcc ?, ?, ?), NaN, (fsqrt ?))
      SDValue Sqrt = RHS;
      ISD::CondCode CC;
      SDValue CmpLHS;
      const ConstantFPSDNode *Zero = nullptr;

      if (TheSelect->getOpcode() == ISD::SELECT_CC) {
        CC = cast<CondCodeSDNode>(TheSelect->getOperand(4))->get();
        CmpLHS = TheSelect->getOperand(0);
        Zero = isConstOrConstSplatFP(TheSelect->getOperand(1));
      } else {
        // SELECT or VSELECT
        SDValue Cmp = TheSelect->getOperand(0);
        if (Cmp.getOpcode() == ISD::SETCC) {
          CC = cast<CondCodeSDNode>(Cmp.getOperand(2))->get();
          CmpLHS = Cmp.getOperand(0);
          Zero = isConstOrConstSplatFP(Cmp.getOperand(1));
        }
      }
      if (Zero && Zero->isZero() &&
          Sqrt.getOperand(0) == CmpLHS && (CC == ISD::SETOLT ||
          CC == ISD::SETULT || CC == ISD::SETLT)) {
        // We have: (select (setcc x, [+-]0.0, *lt), NaN, (fsqrt x))
        CombineTo(TheSelect, Sqrt);
        return true;
      }
    }
  }
  // Cannot simplify select with vector condition
  if (TheSelect->getOperand(0).getValueType().isVector()) return false;

  // If this is a select from two identical things, try to pull the operation
  // through the select.
  if (LHS.getOpcode() != RHS.getOpcode() ||
      !LHS.hasOneUse() || !RHS.hasOneUse())
    return false;

  // If this is a load and the token chain is identical, replace the select
  // of two loads with a load through a select of the address to load from.
  // This triggers in things like "select bool X, 10.0, 123.0" after the FP
  // constants have been dropped into the constant pool.
  if (LHS.getOpcode() == ISD::LOAD) {
    LoadSDNode *LLD = cast<LoadSDNode>(LHS);
    LoadSDNode *RLD = cast<LoadSDNode>(RHS);

    // Token chains must be identical.
    if (LHS.getOperand(0) != RHS.getOperand(0) ||
        // Do not let this transformation reduce the number of volatile loads.
        // Be conservative for atomics for the moment
        // TODO: This does appear to be legal for unordered atomics (see D66309)
        !LLD->isSimple() || !RLD->isSimple() ||
        // FIXME: If either is a pre/post inc/dec load,
        // we'd need to split out the address adjustment.
        LLD->isIndexed() || RLD->isIndexed() ||
        // If this is an EXTLOAD, the VT's must match.
        LLD->getMemoryVT() != RLD->getMemoryVT() ||
        // If this is an EXTLOAD, the kind of extension must match.
        (LLD->getExtensionType() != RLD->getExtensionType() &&
         // The only exception is if one of the extensions is anyext.
         LLD->getExtensionType() != ISD::EXTLOAD &&
         RLD->getExtensionType() != ISD::EXTLOAD) ||
        // FIXME: this discards src value information.  This is
        // over-conservative. It would be beneficial to be able to remember
        // both potential memory locations.  Since we are discarding
        // src value info, don't do the transformation if the memory
        // locations are not in the default address space.
        LLD->getPointerInfo().getAddrSpace() != 0 ||
        RLD->getPointerInfo().getAddrSpace() != 0 ||
        // We can't produce a CMOV of a TargetFrameIndex since we won't
        // generate the address generation required.
        LLD->getBasePtr().getOpcode() == ISD::TargetFrameIndex ||
        RLD->getBasePtr().getOpcode() == ISD::TargetFrameIndex ||
        !TLI.isOperationLegalOrCustom(TheSelect->getOpcode(),
                                      LLD->getBasePtr().getValueType()))
      return false;

    // The loads must not depend on one another.
    if (LLD->isPredecessorOf(RLD) || RLD->isPredecessorOf(LLD))
      return false;

    // Check that the select condition doesn't reach either load.  If so,
    // folding this will induce a cycle into the DAG.  If not, this is safe to
    // xform, so create a select of the addresses.

    SmallPtrSet<const SDNode *, 32> Visited;
    SmallVector<const SDNode *, 16> Worklist;

    // Always fail if LLD and RLD are not independent. TheSelect is a
    // predecessor to all Nodes in question so we need not search past it.

    Visited.insert(TheSelect);
    Worklist.push_back(LLD);
    Worklist.push_back(RLD);

    if (SDNode::hasPredecessorHelper(LLD, Visited, Worklist) ||
        SDNode::hasPredecessorHelper(RLD, Visited, Worklist))
      return false;

    SDValue Addr;
    if (TheSelect->getOpcode() == ISD::SELECT) {
      // We cannot do this optimization if any pair of {RLD, LLD} is a
      // predecessor to {RLD, LLD, CondNode}. As we've already compared the
      // Loads, we only need to check if CondNode is a successor to one of the
      // loads. We can further avoid this if there's no use of their chain
      // value.
      SDNode *CondNode = TheSelect->getOperand(0).getNode();
      Worklist.push_back(CondNode);

      if ((LLD->hasAnyUseOfValue(1) &&
           SDNode::hasPredecessorHelper(LLD, Visited, Worklist)) ||
          (RLD->hasAnyUseOfValue(1) &&
           SDNode::hasPredecessorHelper(RLD, Visited, Worklist)))
        return false;

      Addr = DAG.getSelect(SDLoc(TheSelect),
                           LLD->getBasePtr().getValueType(),
                           TheSelect->getOperand(0), LLD->getBasePtr(),
                           RLD->getBasePtr());
    } else {  // Otherwise SELECT_CC
      // We cannot do this optimization if any pair of {RLD, LLD} is a
      // predecessor to {RLD, LLD, CondLHS, CondRHS}. As we've already compared
      // the Loads, we only need to check if CondLHS/CondRHS is a successor to
      // one of the loads. We can further avoid this if there's no use of their
      // chain value.

      SDNode *CondLHS = TheSelect->getOperand(0).getNode();
      SDNode *CondRHS = TheSelect->getOperand(1).getNode();
      Worklist.push_back(CondLHS);
      Worklist.push_back(CondRHS);

      if ((LLD->hasAnyUseOfValue(1) &&
           SDNode::hasPredecessorHelper(LLD, Visited, Worklist)) ||
          (RLD->hasAnyUseOfValue(1) &&
           SDNode::hasPredecessorHelper(RLD, Visited, Worklist)))
        return false;

      Addr = DAG.getNode(ISD::SELECT_CC, SDLoc(TheSelect),
                         LLD->getBasePtr().getValueType(),
                         TheSelect->getOperand(0),
                         TheSelect->getOperand(1),
                         LLD->getBasePtr(), RLD->getBasePtr(),
                         TheSelect->getOperand(4));
    }

    SDValue Load;
    // It is safe to replace the two loads if they have different alignments,
    // but the new load must be the minimum (most restrictive) alignment of the
    // inputs.
    Align Alignment = std::min(LLD->getAlign(), RLD->getAlign());
    MachineMemOperand::Flags MMOFlags = LLD->getMemOperand()->getFlags();
    if (!RLD->isInvariant())
      MMOFlags &= ~MachineMemOperand::MOInvariant;
    if (!RLD->isDereferenceable())
      MMOFlags &= ~MachineMemOperand::MODereferenceable;
    if (LLD->getExtensionType() == ISD::NON_EXTLOAD) {
      // FIXME: Discards pointer and AA info.
      Load = DAG.getLoad(TheSelect->getValueType(0), SDLoc(TheSelect),
                         LLD->getChain(), Addr, MachinePointerInfo(), Alignment,
                         MMOFlags);
    } else {
      // FIXME: Discards pointer and AA info.
      Load = DAG.getExtLoad(
          LLD->getExtensionType() == ISD::EXTLOAD ? RLD->getExtensionType()
                                                  : LLD->getExtensionType(),
          SDLoc(TheSelect), TheSelect->getValueType(0), LLD->getChain(), Addr,
          MachinePointerInfo(), LLD->getMemoryVT(), Alignment, MMOFlags);
    }

    // Users of the select now use the result of the load.
    CombineTo(TheSelect, Load);

    // Users of the old loads now use the new load's chain.  We know the
    // old-load value is dead now.
    CombineTo(LHS.getNode(), Load.getValue(0), Load.getValue(1));
    CombineTo(RHS.getNode(), Load.getValue(0), Load.getValue(1));
    return true;
  }

  return false;
}

/// Try to fold an expression of the form (N0 cond N1) ? N2 : N3 to a shift and
/// bitwise 'and'.
SDValue DAGCombiner::foldSelectCCToShiftAnd(const SDLoc &DL, SDValue N0,
                                            SDValue N1, SDValue N2, SDValue N3,
                                            ISD::CondCode CC) {
  // If this is a select where the false operand is zero and the compare is a
  // check of the sign bit, see if we can perform the "gzip trick":
  // select_cc setlt X, 0, A, 0 -> and (sra X, size(X)-1), A
  // select_cc setgt X, 0, A, 0 -> and (not (sra X, size(X)-1)), A
  EVT XType = N0.getValueType();
  EVT AType = N2.getValueType();
  if (!isNullConstant(N3) || !XType.bitsGE(AType))
    return SDValue();

  // If the comparison is testing for a positive value, we have to invert
  // the sign bit mask, so only do that transform if the target has a bitwise
  // 'and not' instruction (the invert is free).
  if (CC == ISD::SETGT && TLI.hasAndNot(N2)) {
    // (X > -1) ? A : 0
    // (X >  0) ? X : 0 <-- This is canonical signed max.
    if (!(isAllOnesConstant(N1) || (isNullConstant(N1) && N0 == N2)))
      return SDValue();
  } else if (CC == ISD::SETLT) {
    // (X <  0) ? A : 0
    // (X <  1) ? X : 0 <-- This is un-canonicalized signed min.
    if (!(isNullConstant(N1) || (isOneConstant(N1) && N0 == N2)))
      return SDValue();
  } else {
    return SDValue();
  }

  // and (sra X, size(X)-1), A -> "and (srl X, C2), A" iff A is a single-bit
  // constant.
  auto *N2C = dyn_cast<ConstantSDNode>(N2.getNode());
  if (N2C && ((N2C->getAPIntValue() & (N2C->getAPIntValue() - 1)) == 0)) {
    unsigned ShCt = XType.getSizeInBits() - N2C->getAPIntValue().logBase2() - 1;
    if (!TLI.shouldAvoidTransformToShift(XType, ShCt)) {
      SDValue ShiftAmt = DAG.getShiftAmountConstant(ShCt, XType, DL);
      SDValue Shift = DAG.getNode(ISD::SRL, DL, XType, N0, ShiftAmt);
      AddToWorklist(Shift.getNode());

      if (XType.bitsGT(AType)) {
        Shift = DAG.getNode(ISD::TRUNCATE, DL, AType, Shift);
        AddToWorklist(Shift.getNode());
      }

      if (CC == ISD::SETGT)
        Shift = DAG.getNOT(DL, Shift, AType);

      return DAG.getNode(ISD::AND, DL, AType, Shift, N2);
    }
  }

  unsigned ShCt = XType.getSizeInBits() - 1;
  if (TLI.shouldAvoidTransformToShift(XType, ShCt))
    return SDValue();

  SDValue ShiftAmt = DAG.getShiftAmountConstant(ShCt, XType, DL);
  SDValue Shift = DAG.getNode(ISD::SRA, DL, XType, N0, ShiftAmt);
  AddToWorklist(Shift.getNode());

  if (XType.bitsGT(AType)) {
    Shift = DAG.getNode(ISD::TRUNCATE, DL, AType, Shift);
    AddToWorklist(Shift.getNode());
  }

  if (CC == ISD::SETGT)
    Shift = DAG.getNOT(DL, Shift, AType);

  return DAG.getNode(ISD::AND, DL, AType, Shift, N2);
}

// Fold select(cc, binop(), binop()) -> binop(select(), select()) etc.
SDValue DAGCombiner::foldSelectOfBinops(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue N2 = N->getOperand(2);
  SDLoc DL(N);

  unsigned BinOpc = N1.getOpcode();
  if (!TLI.isBinOp(BinOpc) || (N2.getOpcode() != BinOpc) ||
      (N1.getResNo() != N2.getResNo()))
    return SDValue();

  // The use checks are intentionally on SDNode because we may be dealing
  // with opcodes that produce more than one SDValue.
  // TODO: Do we really need to check N0 (the condition operand of the select)?
  //       But removing that clause could cause an infinite loop...
  if (!N0->hasOneUse() || !N1->hasOneUse() || !N2->hasOneUse())
    return SDValue();

  // Binops may include opcodes that return multiple values, so all values
  // must be created/propagated from the newly created binops below.
  SDVTList OpVTs = N1->getVTList();

  // Fold select(cond, binop(x, y), binop(z, y))
  //  --> binop(select(cond, x, z), y)
  if (N1.getOperand(1) == N2.getOperand(1)) {
    SDValue N10 = N1.getOperand(0);
    SDValue N20 = N2.getOperand(0);
    SDValue NewSel = DAG.getSelect(DL, N10.getValueType(), N0, N10, N20);
    SDValue NewBinOp = DAG.getNode(BinOpc, DL, OpVTs, NewSel, N1.getOperand(1));
    NewBinOp->setFlags(N1->getFlags());
    NewBinOp->intersectFlagsWith(N2->getFlags());
    return SDValue(NewBinOp.getNode(), N1.getResNo());
  }

  // Fold select(cond, binop(x, y), binop(x, z))
  //  --> binop(x, select(cond, y, z))
  if (N1.getOperand(0) == N2.getOperand(0)) {
    SDValue N11 = N1.getOperand(1);
    SDValue N21 = N2.getOperand(1);
    // Second op VT might be different (e.g. shift amount type)
    if (N11.getValueType() == N21.getValueType()) {
      SDValue NewSel = DAG.getSelect(DL, N11.getValueType(), N0, N11, N21);
      SDValue NewBinOp =
          DAG.getNode(BinOpc, DL, OpVTs, N1.getOperand(0), NewSel);
      NewBinOp->setFlags(N1->getFlags());
      NewBinOp->intersectFlagsWith(N2->getFlags());
      return SDValue(NewBinOp.getNode(), N1.getResNo());
    }
  }

  // TODO: Handle isCommutativeBinOp patterns as well?
  return SDValue();
}

// Transform (fneg/fabs (bitconvert x)) to avoid loading constant pool values.
SDValue DAGCombiner::foldSignChangeInBitcast(SDNode *N) {
  SDValue N0 = N->getOperand(0);
  EVT VT = N->getValueType(0);
  bool IsFabs = N->getOpcode() == ISD::FABS;
  bool IsFree = IsFabs ? TLI.isFAbsFree(VT) : TLI.isFNegFree(VT);

  if (IsFree || N0.getOpcode() != ISD::BITCAST || !N0.hasOneUse())
    return SDValue();

  SDValue Int = N0.getOperand(0);
  EVT IntVT = Int.getValueType();

  // The operand to cast should be integer.
  if (!IntVT.isInteger() || IntVT.isVector())
    return SDValue();

  // (fneg (bitconvert x)) -> (bitconvert (xor x sign))
  // (fabs (bitconvert x)) -> (bitconvert (and x ~sign))
  APInt SignMask;
  if (N0.getValueType().isVector()) {
    // For vector, create a sign mask (0x80...) or its inverse (for fabs,
    // 0x7f...) per element and splat it.
    SignMask = APInt::getSignMask(N0.getScalarValueSizeInBits());
    if (IsFabs)
      SignMask = ~SignMask;
    SignMask = APInt::getSplat(IntVT.getSizeInBits(), SignMask);
  } else {
    // For scalar, just use the sign mask (0x80... or the inverse, 0x7f...)
    SignMask = APInt::getSignMask(IntVT.getSizeInBits());
    if (IsFabs)
      SignMask = ~SignMask;
  }
  SDLoc DL(N0);
  Int = DAG.getNode(IsFabs ? ISD::AND : ISD::XOR, DL, IntVT, Int,
                    DAG.getConstant(SignMask, DL, IntVT));
  AddToWorklist(Int.getNode());
  return DAG.getBitcast(VT, Int);
}

/// Turn "(a cond b) ? 1.0f : 2.0f" into "load (tmp + ((a cond b) ? 0 : 4)"
/// where "tmp" is a constant pool entry containing an array with 1.0 and 2.0
/// in it. This may be a win when the constant is not otherwise available
/// because it replaces two constant pool loads with one.
SDValue DAGCombiner::convertSelectOfFPConstantsToLoadOffset(
    const SDLoc &DL, SDValue N0, SDValue N1, SDValue N2, SDValue N3,
    ISD::CondCode CC) {
  if (!TLI.reduceSelectOfFPConstantLoads(N0.getValueType()))
    return SDValue();

  // If we are before legalize types, we want the other legalization to happen
  // first (for example, to avoid messing with soft float).
  auto *TV = dyn_cast<ConstantFPSDNode>(N2);
  auto *FV = dyn_cast<ConstantFPSDNode>(N3);
  EVT VT = N2.getValueType();
  if (!TV || !FV || !TLI.isTypeLegal(VT))
    return SDValue();

  // If a constant can be materialized without loads, this does not make sense.
  if (TLI.getOperationAction(ISD::ConstantFP, VT) == TargetLowering::Legal ||
      TLI.isFPImmLegal(TV->getValueAPF(), TV->getValueType(0), ForCodeSize) ||
      TLI.isFPImmLegal(FV->getValueAPF(), FV->getValueType(0), ForCodeSize))
    return SDValue();

  // If both constants have multiple uses, then we won't need to do an extra
  // load. The values are likely around in registers for other users.
  if (!TV->hasOneUse() && !FV->hasOneUse())
    return SDValue();

  Constant *Elts[] = { const_cast<ConstantFP*>(FV->getConstantFPValue()),
                       const_cast<ConstantFP*>(TV->getConstantFPValue()) };
  Type *FPTy = Elts[0]->getType();
  const DataLayout &TD = DAG.getDataLayout();

  // Create a ConstantArray of the two constants.
  Constant *CA = ConstantArray::get(ArrayType::get(FPTy, 2), Elts);
  SDValue CPIdx = DAG.getConstantPool(CA, TLI.getPointerTy(DAG.getDataLayout()),
                                      TD.getPrefTypeAlign(FPTy));
  Align Alignment = cast<ConstantPoolSDNode>(CPIdx)->getAlign();

  // Get offsets to the 0 and 1 elements of the array, so we can select between
  // them.
  SDValue Zero = DAG.getIntPtrConstant(0, DL);
  unsigned EltSize = (unsigned)TD.getTypeAllocSize(Elts[0]->getType());
  SDValue One = DAG.getIntPtrConstant(EltSize, SDLoc(FV));
  SDValue Cond =
      DAG.getSetCC(DL, getSetCCResultType(N0.getValueType()), N0, N1, CC);
  AddToWorklist(Cond.getNode());
  SDValue CstOffset = DAG.getSelect(DL, Zero.getValueType(), Cond, One, Zero);
  AddToWorklist(CstOffset.getNode());
  CPIdx = DAG.getNode(ISD::ADD, DL, CPIdx.getValueType(), CPIdx, CstOffset);
  AddToWorklist(CPIdx.getNode());
  return DAG.getLoad(TV->getValueType(0), DL, DAG.getEntryNode(), CPIdx,
                     MachinePointerInfo::getConstantPool(
                         DAG.getMachineFunction()), Alignment);
}

/// Simplify an expression of the form (N0 cond N1) ? N2 : N3
/// where 'cond' is the comparison specified by CC.
SDValue DAGCombiner::SimplifySelectCC(const SDLoc &DL, SDValue N0, SDValue N1,
                                      SDValue N2, SDValue N3, ISD::CondCode CC,
                                      bool NotExtCompare) {
  // (x ? y : y) -> y.
  if (N2 == N3) return N2;

  EVT CmpOpVT = N0.getValueType();
  EVT CmpResVT = getSetCCResultType(CmpOpVT);
  EVT VT = N2.getValueType();
  auto *N1C = dyn_cast<ConstantSDNode>(N1.getNode());
  auto *N2C = dyn_cast<ConstantSDNode>(N2.getNode());
  auto *N3C = dyn_cast<ConstantSDNode>(N3.getNode());

  // Determine if the condition we're dealing with is constant.
  if (SDValue SCC = DAG.FoldSetCC(CmpResVT, N0, N1, CC, DL)) {
    AddToWorklist(SCC.getNode());
    if (auto *SCCC = dyn_cast<ConstantSDNode>(SCC)) {
      // fold select_cc true, x, y -> x
      // fold select_cc false, x, y -> y
      return !(SCCC->isZero()) ? N2 : N3;
    }
  }

  if (SDValue V =
          convertSelectOfFPConstantsToLoadOffset(DL, N0, N1, N2, N3, CC))
    return V;

  if (SDValue V = foldSelectCCToShiftAnd(DL, N0, N1, N2, N3, CC))
    return V;

  // fold (select_cc seteq (and x, y), 0, 0, A) -> (and (sra (shl x)) A)
  // where y is has a single bit set.
  // A plaintext description would be, we can turn the SELECT_CC into an AND
  // when the condition can be materialized as an all-ones register.  Any
  // single bit-test can be materialized as an all-ones register with
  // shift-left and shift-right-arith.
  if (CC == ISD::SETEQ && N0->getOpcode() == ISD::AND &&
      N0->getValueType(0) == VT && isNullConstant(N1) && isNullConstant(N2)) {
    SDValue AndLHS = N0->getOperand(0);
    auto *ConstAndRHS = dyn_cast<ConstantSDNode>(N0->getOperand(1));
    if (ConstAndRHS && ConstAndRHS->getAPIntValue().popcount() == 1) {
      // Shift the tested bit over the sign bit.
      const APInt &AndMask = ConstAndRHS->getAPIntValue();
      if (TLI.shouldFoldSelectWithSingleBitTest(VT, AndMask)) {
        unsigned ShCt = AndMask.getBitWidth() - 1;
        SDValue ShlAmt = DAG.getShiftAmountConstant(AndMask.countl_zero(), VT,
                                                    SDLoc(AndLHS));
        SDValue Shl = DAG.getNode(ISD::SHL, SDLoc(N0), VT, AndLHS, ShlAmt);

        // Now arithmetic right shift it all the way over, so the result is
        // either all-ones, or zero.
        SDValue ShrAmt = DAG.getShiftAmountConstant(ShCt, VT, SDLoc(Shl));
        SDValue Shr = DAG.getNode(ISD::SRA, SDLoc(N0), VT, Shl, ShrAmt);

        return DAG.getNode(ISD::AND, DL, VT, Shr, N3);
      }
    }
  }

  // fold select C, 16, 0 -> shl C, 4
  bool Fold = N2C && isNullConstant(N3) && N2C->getAPIntValue().isPowerOf2();
  bool Swap = N3C && isNullConstant(N2) && N3C->getAPIntValue().isPowerOf2();

  if ((Fold || Swap) &&
      TLI.getBooleanContents(CmpOpVT) ==
          TargetLowering::ZeroOrOneBooleanContent &&
      (!LegalOperations || TLI.isOperationLegal(ISD::SETCC, CmpOpVT))) {

    if (Swap) {
      CC = ISD::getSetCCInverse(CC, CmpOpVT);
      std::swap(N2C, N3C);
    }

    // If the caller doesn't want us to simplify this into a zext of a compare,
    // don't do it.
    if (NotExtCompare && N2C->isOne())
      return SDValue();

    SDValue Temp, SCC;
    // zext (setcc n0, n1)
    if (LegalTypes) {
      SCC = DAG.getSetCC(DL, CmpResVT, N0, N1, CC);
      Temp = DAG.getZExtOrTrunc(SCC, SDLoc(N2), VT);
    } else {
      SCC = DAG.getSetCC(SDLoc(N0), MVT::i1, N0, N1, CC);
      Temp = DAG.getNode(ISD::ZERO_EXTEND, SDLoc(N2), VT, SCC);
    }

    AddToWorklist(SCC.getNode());
    AddToWorklist(Temp.getNode());

    if (N2C->isOne())
      return Temp;

    unsigned ShCt = N2C->getAPIntValue().logBase2();
    if (TLI.shouldAvoidTransformToShift(VT, ShCt))
      return SDValue();

    // shl setcc result by log2 n2c
    return DAG.getNode(
        ISD::SHL, DL, N2.getValueType(), Temp,
        DAG.getShiftAmountConstant(ShCt, N2.getValueType(), SDLoc(Temp)));
  }

  // select_cc seteq X, 0, sizeof(X), ctlz(X) -> ctlz(X)
  // select_cc seteq X, 0, sizeof(X), ctlz_zero_undef(X) -> ctlz(X)
  // select_cc seteq X, 0, sizeof(X), cttz(X) -> cttz(X)
  // select_cc seteq X, 0, sizeof(X), cttz_zero_undef(X) -> cttz(X)
  // select_cc setne X, 0, ctlz(X), sizeof(X) -> ctlz(X)
  // select_cc setne X, 0, ctlz_zero_undef(X), sizeof(X) -> ctlz(X)
  // select_cc setne X, 0, cttz(X), sizeof(X) -> cttz(X)
  // select_cc setne X, 0, cttz_zero_undef(X), sizeof(X) -> cttz(X)
  if (N1C && N1C->isZero() && (CC == ISD::SETEQ || CC == ISD::SETNE)) {
    SDValue ValueOnZero = N2;
    SDValue Count = N3;
    // If the condition is NE instead of E, swap the operands.
    if (CC == ISD::SETNE)
      std::swap(ValueOnZero, Count);
    // Check if the value on zero is a constant equal to the bits in the type.
    if (auto *ValueOnZeroC = dyn_cast<ConstantSDNode>(ValueOnZero)) {
      if (ValueOnZeroC->getAPIntValue() == VT.getSizeInBits()) {
        // If the other operand is cttz/cttz_zero_undef of N0, and cttz is
        // legal, combine to just cttz.
        if ((Count.getOpcode() == ISD::CTTZ ||
             Count.getOpcode() == ISD::CTTZ_ZERO_UNDEF) &&
            N0 == Count.getOperand(0) &&
            (!LegalOperations || TLI.isOperationLegal(ISD::CTTZ, VT)))
          return DAG.getNode(ISD::CTTZ, DL, VT, N0);
        // If the other operand is ctlz/ctlz_zero_undef of N0, and ctlz is
        // legal, combine to just ctlz.
        if ((Count.getOpcode() == ISD::CTLZ ||
             Count.getOpcode() == ISD::CTLZ_ZERO_UNDEF) &&
            N0 == Count.getOperand(0) &&
            (!LegalOperations || TLI.isOperationLegal(ISD::CTLZ, VT)))
          return DAG.getNode(ISD::CTLZ, DL, VT, N0);
      }
    }
  }

  // Fold select_cc setgt X, -1, C, ~C -> xor (ashr X, BW-1), C
  // Fold select_cc setlt X, 0, C, ~C -> xor (ashr X, BW-1), ~C
  if (!NotExtCompare && N1C && N2C && N3C &&
      N2C->getAPIntValue() == ~N3C->getAPIntValue() &&
      ((N1C->isAllOnes() && CC == ISD::SETGT) ||
       (N1C->isZero() && CC == ISD::SETLT)) &&
      !TLI.shouldAvoidTransformToShift(VT, CmpOpVT.getScalarSizeInBits() - 1)) {
    SDValue ASR = DAG.getNode(
        ISD::SRA, DL, CmpOpVT, N0,
        DAG.getConstant(CmpOpVT.getScalarSizeInBits() - 1, DL, CmpOpVT));
    return DAG.getNode(ISD::XOR, DL, VT, DAG.getSExtOrTrunc(ASR, DL, VT),
                       DAG.getSExtOrTrunc(CC == ISD::SETLT ? N3 : N2, DL, VT));
  }

  if (SDValue S = PerformMinMaxFpToSatCombine(N0, N1, N2, N3, CC, DAG))
    return S;
  if (SDValue S = PerformUMinFpToSatCombine(N0, N1, N2, N3, CC, DAG))
    return S;
  if (SDValue ABD = foldSelectToABD(N0, N1, N2, N3, CC, DL))
    return ABD;

  return SDValue();
}

/// This is a stub for TargetLowering::SimplifySetCC.
SDValue DAGCombiner::SimplifySetCC(EVT VT, SDValue N0, SDValue N1,
                                   ISD::CondCode Cond, const SDLoc &DL,
                                   bool foldBooleans) {
  TargetLowering::DAGCombinerInfo
    DagCombineInfo(DAG, Level, false, this);
  return TLI.SimplifySetCC(VT, N0, N1, Cond, foldBooleans, DagCombineInfo, DL);
}

/// Given an ISD::SDIV node expressing a divide by constant, return
/// a DAG expression to select that will generate the same value by multiplying
/// by a magic number.
/// Ref: "Hacker's Delight" or "The PowerPC Compiler Writer's Guide".
SDValue DAGCombiner::BuildSDIV(SDNode *N) {
  // when optimising for minimum size, we don't want to expand a div to a mul
  // and a shift.
  if (DAG.getMachineFunction().getFunction().hasMinSize())
    return SDValue();

  SmallVector<SDNode *, 8> Built;
  if (SDValue S = TLI.BuildSDIV(N, DAG, LegalOperations, LegalTypes, Built)) {
    for (SDNode *N : Built)
      AddToWorklist(N);
    return S;
  }

  return SDValue();
}

/// Given an ISD::SDIV node expressing a divide by constant power of 2, return a
/// DAG expression that will generate the same value by right shifting.
SDValue DAGCombiner::BuildSDIVPow2(SDNode *N) {
  ConstantSDNode *C = isConstOrConstSplat(N->getOperand(1));
  if (!C)
    return SDValue();

  // Avoid division by zero.
  if (C->isZero())
    return SDValue();

  SmallVector<SDNode *, 8> Built;
  if (SDValue S = TLI.BuildSDIVPow2(N, C->getAPIntValue(), DAG, Built)) {
    for (SDNode *N : Built)
      AddToWorklist(N);
    return S;
  }

  return SDValue();
}

/// Given an ISD::UDIV node expressing a divide by constant, return a DAG
/// expression that will generate the same value by multiplying by a magic
/// number.
/// Ref: "Hacker's Delight" or "The PowerPC Compiler Writer's Guide".
SDValue DAGCombiner::BuildUDIV(SDNode *N) {
  // when optimising for minimum size, we don't want to expand a div to a mul
  // and a shift.
  if (DAG.getMachineFunction().getFunction().hasMinSize())
    return SDValue();

  SmallVector<SDNode *, 8> Built;
  if (SDValue S = TLI.BuildUDIV(N, DAG, LegalOperations, LegalTypes, Built)) {
    for (SDNode *N : Built)
      AddToWorklist(N);
    return S;
  }

  return SDValue();
}

/// Given an ISD::SREM node expressing a remainder by constant power of 2,
/// return a DAG expression that will generate the same value.
SDValue DAGCombiner::BuildSREMPow2(SDNode *N) {
  ConstantSDNode *C = isConstOrConstSplat(N->getOperand(1));
  if (!C)
    return SDValue();

  // Avoid division by zero.
  if (C->isZero())
    return SDValue();

  SmallVector<SDNode *, 8> Built;
  if (SDValue S = TLI.BuildSREMPow2(N, C->getAPIntValue(), DAG, Built)) {
    for (SDNode *N : Built)
      AddToWorklist(N);
    return S;
  }

  return SDValue();
}

// This is basically just a port of takeLog2 from InstCombineMulDivRem.cpp
//
// Returns the node that represents `Log2(Op)`. This may create a new node. If
// we are unable to compute `Log2(Op)` its return `SDValue()`.
//
// All nodes will be created at `DL` and the output will be of type `VT`.
//
// This will only return `Log2(Op)` if we can prove `Op` is non-zero. Set
// `AssumeNonZero` if this function should simply assume (not require proving
// `Op` is non-zero).
static SDValue takeInexpensiveLog2(SelectionDAG &DAG, const SDLoc &DL, EVT VT,
                                   SDValue Op, unsigned Depth,
                                   bool AssumeNonZero) {
  assert(VT.isInteger() && "Only integer types are supported!");

  auto PeekThroughCastsAndTrunc = [](SDValue V) {
    while (true) {
      switch (V.getOpcode()) {
      case ISD::TRUNCATE:
      case ISD::ZERO_EXTEND:
        V = V.getOperand(0);
        break;
      default:
        return V;
      }
    }
  };

  if (VT.isScalableVector())
    return SDValue();

  Op = PeekThroughCastsAndTrunc(Op);

  // Helper for determining whether a value is a power-2 constant scalar or a
  // vector of such elements.
  SmallVector<APInt> Pow2Constants;
  auto IsPowerOfTwo = [&Pow2Constants](ConstantSDNode *C) {
    if (C->isZero() || C->isOpaque())
      return false;
    // TODO: We may also be able to support negative powers of 2 here.
    if (C->getAPIntValue().isPowerOf2()) {
      Pow2Constants.emplace_back(C->getAPIntValue());
      return true;
    }
    return false;
  };

  if (ISD::matchUnaryPredicate(Op, IsPowerOfTwo)) {
    if (!VT.isVector())
      return DAG.getConstant(Pow2Constants.back().logBase2(), DL, VT);
    // We need to create a build vector
    if (Op.getOpcode() == ISD::SPLAT_VECTOR)
      return DAG.getSplat(VT, DL,
                          DAG.getConstant(Pow2Constants.back().logBase2(), DL,
                                          VT.getScalarType()));
    SmallVector<SDValue> Log2Ops;
    for (const APInt &Pow2 : Pow2Constants)
      Log2Ops.emplace_back(
          DAG.getConstant(Pow2.logBase2(), DL, VT.getScalarType()));
    return DAG.getBuildVector(VT, DL, Log2Ops);
  }

  if (Depth >= DAG.MaxRecursionDepth)
    return SDValue();

  auto CastToVT = [&](EVT NewVT, SDValue ToCast) {
    ToCast = PeekThroughCastsAndTrunc(ToCast);
    EVT CurVT = ToCast.getValueType();
    if (NewVT == CurVT)
      return ToCast;

    if (NewVT.getSizeInBits() == CurVT.getSizeInBits())
      return DAG.getBitcast(NewVT, ToCast);

    return DAG.getZExtOrTrunc(ToCast, DL, NewVT);
  };

  // log2(X << Y) -> log2(X) + Y
  if (Op.getOpcode() == ISD::SHL) {
    // 1 << Y and X nuw/nsw << Y are all non-zero.
    if (AssumeNonZero || Op->getFlags().hasNoUnsignedWrap() ||
        Op->getFlags().hasNoSignedWrap() || isOneConstant(Op.getOperand(0)))
      if (SDValue LogX = takeInexpensiveLog2(DAG, DL, VT, Op.getOperand(0),
                                             Depth + 1, AssumeNonZero))
        return DAG.getNode(ISD::ADD, DL, VT, LogX,
                           CastToVT(VT, Op.getOperand(1)));
  }

  // c ? X : Y -> c ? Log2(X) : Log2(Y)
  if ((Op.getOpcode() == ISD::SELECT || Op.getOpcode() == ISD::VSELECT) &&
      Op.hasOneUse()) {
    if (SDValue LogX = takeInexpensiveLog2(DAG, DL, VT, Op.getOperand(1),
                                           Depth + 1, AssumeNonZero))
      if (SDValue LogY = takeInexpensiveLog2(DAG, DL, VT, Op.getOperand(2),
                                             Depth + 1, AssumeNonZero))
        return DAG.getSelect(DL, VT, Op.getOperand(0), LogX, LogY);
  }

  // log2(umin(X, Y)) -> umin(log2(X), log2(Y))
  // log2(umax(X, Y)) -> umax(log2(X), log2(Y))
  if ((Op.getOpcode() == ISD::UMIN || Op.getOpcode() == ISD::UMAX) &&
      Op.hasOneUse()) {
    // Use AssumeNonZero as false here. Otherwise we can hit case where
    // log2(umax(X, Y)) != umax(log2(X), log2(Y)) (because overflow).
    if (SDValue LogX =
            takeInexpensiveLog2(DAG, DL, VT, Op.getOperand(0), Depth + 1,
                                /*AssumeNonZero*/ false))
      if (SDValue LogY =
              takeInexpensiveLog2(DAG, DL, VT, Op.getOperand(1), Depth + 1,
                                  /*AssumeNonZero*/ false))
        return DAG.getNode(Op.getOpcode(), DL, VT, LogX, LogY);
  }

  return SDValue();
}

/// Determines the LogBase2 value for a non-null input value using the
/// transform: LogBase2(V) = (EltBits - 1) - ctlz(V).
SDValue DAGCombiner::BuildLogBase2(SDValue V, const SDLoc &DL,
                                   bool KnownNonZero, bool InexpensiveOnly,
                                   std::optional<EVT> OutVT) {
  EVT VT = OutVT ? *OutVT : V.getValueType();
  SDValue InexpensiveLogBase2 =
      takeInexpensiveLog2(DAG, DL, VT, V, /*Depth*/ 0, KnownNonZero);
  if (InexpensiveLogBase2 || InexpensiveOnly || !DAG.isKnownToBeAPowerOfTwo(V))
    return InexpensiveLogBase2;

  SDValue Ctlz = DAG.getNode(ISD::CTLZ, DL, VT, V);
  SDValue Base = DAG.getConstant(VT.getScalarSizeInBits() - 1, DL, VT);
  SDValue LogBase2 = DAG.getNode(ISD::SUB, DL, VT, Base, Ctlz);
  return LogBase2;
}

/// Newton iteration for a function: F(X) is X_{i+1} = X_i - F(X_i)/F'(X_i)
/// For the reciprocal, we need to find the zero of the function:
///   F(X) = 1/X - A [which has a zero at X = 1/A]
///     =>
///   X_{i+1} = X_i (2 - A X_i) = X_i + X_i (1 - A X_i) [this second form
///     does not require additional intermediate precision]
/// For the last iteration, put numerator N into it to gain more precision:
///   Result = N X_i + X_i (N - N A X_i)
SDValue DAGCombiner::BuildDivEstimate(SDValue N, SDValue Op,
                                      SDNodeFlags Flags) {
  if (LegalDAG)
    return SDValue();

  // TODO: Handle extended types?
  EVT VT = Op.getValueType();
  if (VT.getScalarType() != MVT::f16 && VT.getScalarType() != MVT::f32 &&
      VT.getScalarType() != MVT::f64)
    return SDValue();

  // If estimates are explicitly disabled for this function, we're done.
  MachineFunction &MF = DAG.getMachineFunction();
  int Enabled = TLI.getRecipEstimateDivEnabled(VT, MF);
  if (Enabled == TLI.ReciprocalEstimate::Disabled)
    return SDValue();

  // Estimates may be explicitly enabled for this type with a custom number of
  // refinement steps.
  int Iterations = TLI.getDivRefinementSteps(VT, MF);
  if (SDValue Est = TLI.getRecipEstimate(Op, DAG, Enabled, Iterations)) {
    AddToWorklist(Est.getNode());

    SDLoc DL(Op);
    if (Iterations) {
      SDValue FPOne = DAG.getConstantFP(1.0, DL, VT);

      // Newton iterations: Est = Est + Est (N - Arg * Est)
      // If this is the last iteration, also multiply by the numerator.
      for (int i = 0; i < Iterations; ++i) {
        SDValue MulEst = Est;

        if (i == Iterations - 1) {
          MulEst = DAG.getNode(ISD::FMUL, DL, VT, N, Est, Flags);
          AddToWorklist(MulEst.getNode());
        }

        SDValue NewEst = DAG.getNode(ISD::FMUL, DL, VT, Op, MulEst, Flags);
        AddToWorklist(NewEst.getNode());

        NewEst = DAG.getNode(ISD::FSUB, DL, VT,
                             (i == Iterations - 1 ? N : FPOne), NewEst, Flags);
        AddToWorklist(NewEst.getNode());

        NewEst = DAG.getNode(ISD::FMUL, DL, VT, Est, NewEst, Flags);
        AddToWorklist(NewEst.getNode());

        Est = DAG.getNode(ISD::FADD, DL, VT, MulEst, NewEst, Flags);
        AddToWorklist(Est.getNode());
      }
    } else {
      // If no iterations are available, multiply with N.
      Est = DAG.getNode(ISD::FMUL, DL, VT, Est, N, Flags);
      AddToWorklist(Est.getNode());
    }

    return Est;
  }

  return SDValue();
}

/// Newton iteration for a function: F(X) is X_{i+1} = X_i - F(X_i)/F'(X_i)
/// For the reciprocal sqrt, we need to find the zero of the function:
///   F(X) = 1/X^2 - A [which has a zero at X = 1/sqrt(A)]
///     =>
///   X_{i+1} = X_i (1.5 - A X_i^2 / 2)
/// As a result, we precompute A/2 prior to the iteration loop.
SDValue DAGCombiner::buildSqrtNROneConst(SDValue Arg, SDValue Est,
                                         unsigned Iterations,
                                         SDNodeFlags Flags, bool Reciprocal) {
  EVT VT = Arg.getValueType();
  SDLoc DL(Arg);
  SDValue ThreeHalves = DAG.getConstantFP(1.5, DL, VT);

  // We now need 0.5 * Arg which we can write as (1.5 * Arg - Arg) so that
  // this entire sequence requires only one FP constant.
  SDValue HalfArg = DAG.getNode(ISD::FMUL, DL, VT, ThreeHalves, Arg, Flags);
  HalfArg = DAG.getNode(ISD::FSUB, DL, VT, HalfArg, Arg, Flags);

  // Newton iterations: Est = Est * (1.5 - HalfArg * Est * Est)
  for (unsigned i = 0; i < Iterations; ++i) {
    SDValue NewEst = DAG.getNode(ISD::FMUL, DL, VT, Est, Est, Flags);
    NewEst = DAG.getNode(ISD::FMUL, DL, VT, HalfArg, NewEst, Flags);
    NewEst = DAG.getNode(ISD::FSUB, DL, VT, ThreeHalves, NewEst, Flags);
    Est = DAG.getNode(ISD::FMUL, DL, VT, Est, NewEst, Flags);
  }

  // If non-reciprocal square root is requested, multiply the result by Arg.
  if (!Reciprocal)
    Est = DAG.getNode(ISD::FMUL, DL, VT, Est, Arg, Flags);

  return Est;
}

/// Newton iteration for a function: F(X) is X_{i+1} = X_i - F(X_i)/F'(X_i)
/// For the reciprocal sqrt, we need to find the zero of the function:
///   F(X) = 1/X^2 - A [which has a zero at X = 1/sqrt(A)]
///     =>
///   X_{i+1} = (-0.5 * X_i) * (A * X_i * X_i + (-3.0))
SDValue DAGCombiner::buildSqrtNRTwoConst(SDValue Arg, SDValue Est,
                                         unsigned Iterations,
                                         SDNodeFlags Flags, bool Reciprocal) {
  EVT VT = Arg.getValueType();
  SDLoc DL(Arg);
  SDValue MinusThree = DAG.getConstantFP(-3.0, DL, VT);
  SDValue MinusHalf = DAG.getConstantFP(-0.5, DL, VT);

  // This routine must enter the loop below to work correctly
  // when (Reciprocal == false).
  assert(Iterations > 0);

  // Newton iterations for reciprocal square root:
  // E = (E * -0.5) * ((A * E) * E + -3.0)
  for (unsigned i = 0; i < Iterations; ++i) {
    SDValue AE = DAG.getNode(ISD::FMUL, DL, VT, Arg, Est, Flags);
    SDValue AEE = DAG.getNode(ISD::FMUL, DL, VT, AE, Est, Flags);
    SDValue RHS = DAG.getNode(ISD::FADD, DL, VT, AEE, MinusThree, Flags);

    // When calculating a square root at the last iteration build:
    // S = ((A * E) * -0.5) * ((A * E) * E + -3.0)
    // (notice a common subexpression)
    SDValue LHS;
    if (Reciprocal || (i + 1) < Iterations) {
      // RSQRT: LHS = (E * -0.5)
      LHS = DAG.getNode(ISD::FMUL, DL, VT, Est, MinusHalf, Flags);
    } else {
      // SQRT: LHS = (A * E) * -0.5
      LHS = DAG.getNode(ISD::FMUL, DL, VT, AE, MinusHalf, Flags);
    }

    Est = DAG.getNode(ISD::FMUL, DL, VT, LHS, RHS, Flags);
  }

  return Est;
}

/// Build code to calculate either rsqrt(Op) or sqrt(Op). In the latter case
/// Op*rsqrt(Op) is actually computed, so additional postprocessing is needed if
/// Op can be zero.
SDValue DAGCombiner::buildSqrtEstimateImpl(SDValue Op, SDNodeFlags Flags,
                                           bool Reciprocal) {
  if (LegalDAG)
    return SDValue();

  // TODO: Handle extended types?
  EVT VT = Op.getValueType();
  if (VT.getScalarType() != MVT::f16 && VT.getScalarType() != MVT::f32 &&
      VT.getScalarType() != MVT::f64)
    return SDValue();

  // If estimates are explicitly disabled for this function, we're done.
  MachineFunction &MF = DAG.getMachineFunction();
  int Enabled = TLI.getRecipEstimateSqrtEnabled(VT, MF);
  if (Enabled == TLI.ReciprocalEstimate::Disabled)
    return SDValue();

  // Estimates may be explicitly enabled for this type with a custom number of
  // refinement steps.
  int Iterations = TLI.getSqrtRefinementSteps(VT, MF);

  bool UseOneConstNR = false;
  if (SDValue Est =
      TLI.getSqrtEstimate(Op, DAG, Enabled, Iterations, UseOneConstNR,
                          Reciprocal)) {
    AddToWorklist(Est.getNode());

    if (Iterations > 0)
      Est = UseOneConstNR
            ? buildSqrtNROneConst(Op, Est, Iterations, Flags, Reciprocal)
            : buildSqrtNRTwoConst(Op, Est, Iterations, Flags, Reciprocal);
    if (!Reciprocal) {
      SDLoc DL(Op);
      // Try the target specific test first.
      SDValue Test = TLI.getSqrtInputTest(Op, DAG, DAG.getDenormalMode(VT));

      // The estimate is now completely wrong if the input was exactly 0.0 or
      // possibly a denormal. Force the answer to 0.0 or value provided by
      // target for those cases.
      Est = DAG.getNode(
          Test.getValueType().isVector() ? ISD::VSELECT : ISD::SELECT, DL, VT,
          Test, TLI.getSqrtResultForDenormInput(Op, DAG), Est);
    }
    return Est;
  }

  return SDValue();
}

SDValue DAGCombiner::buildRsqrtEstimate(SDValue Op, SDNodeFlags Flags) {
  return buildSqrtEstimateImpl(Op, Flags, true);
}

SDValue DAGCombiner::buildSqrtEstimate(SDValue Op, SDNodeFlags Flags) {
  return buildSqrtEstimateImpl(Op, Flags, false);
}

/// Return true if there is any possibility that the two addresses overlap.
bool DAGCombiner::mayAlias(SDNode *Op0, SDNode *Op1) const {

  struct MemUseCharacteristics {
    bool IsVolatile;
    bool IsAtomic;
    SDValue BasePtr;
    int64_t Offset;
    LocationSize NumBytes;
    MachineMemOperand *MMO;
  };

  auto getCharacteristics = [](SDNode *N) -> MemUseCharacteristics {
    if (const auto *LSN = dyn_cast<LSBaseSDNode>(N)) {
      int64_t Offset = 0;
      if (auto *C = dyn_cast<ConstantSDNode>(LSN->getOffset()))
        Offset = (LSN->getAddressingMode() == ISD::PRE_INC) ? C->getSExtValue()
                 : (LSN->getAddressingMode() == ISD::PRE_DEC)
                     ? -1 * C->getSExtValue()
                     : 0;
      TypeSize Size = LSN->getMemoryVT().getStoreSize();
      return {LSN->isVolatile(),           LSN->isAtomic(),
              LSN->getBasePtr(),           Offset /*base offset*/,
              LocationSize::precise(Size), LSN->getMemOperand()};
    }
    if (const auto *LN = cast<LifetimeSDNode>(N))
      return {false /*isVolatile*/,
              /*isAtomic*/ false,
              LN->getOperand(1),
              (LN->hasOffset()) ? LN->getOffset() : 0,
              (LN->hasOffset()) ? LocationSize::precise(LN->getSize())
                                : LocationSize::beforeOrAfterPointer(),
              (MachineMemOperand *)nullptr};
    // Default.
    return {false /*isvolatile*/,
            /*isAtomic*/ false,
            SDValue(),
            (int64_t)0 /*offset*/,
            LocationSize::beforeOrAfterPointer() /*size*/,
            (MachineMemOperand *)nullptr};
  };

  MemUseCharacteristics MUC0 = getCharacteristics(Op0),
                        MUC1 = getCharacteristics(Op1);

  // If they are to the same address, then they must be aliases.
  if (MUC0.BasePtr.getNode() && MUC0.BasePtr == MUC1.BasePtr &&
      MUC0.Offset == MUC1.Offset)
    return true;

  // If they are both volatile then they cannot be reordered.
  if (MUC0.IsVolatile && MUC1.IsVolatile)
    return true;

  // Be conservative about atomics for the moment
  // TODO: This is way overconservative for unordered atomics (see D66309)
  if (MUC0.IsAtomic && MUC1.IsAtomic)
    return true;

  if (MUC0.MMO && MUC1.MMO) {
    if ((MUC0.MMO->isInvariant() && MUC1.MMO->isStore()) ||
        (MUC1.MMO->isInvariant() && MUC0.MMO->isStore()))
      return false;
  }

  // If NumBytes is scalable and offset is not 0, conservatively return may
  // alias
  if ((MUC0.NumBytes.hasValue() && MUC0.NumBytes.isScalable() &&
       MUC0.Offset != 0) ||
      (MUC1.NumBytes.hasValue() && MUC1.NumBytes.isScalable() &&
       MUC1.Offset != 0))
    return true;
  // Try to prove that there is aliasing, or that there is no aliasing. Either
  // way, we can return now. If nothing can be proved, proceed with more tests.
  bool IsAlias;
  if (BaseIndexOffset::computeAliasing(Op0, MUC0.NumBytes, Op1, MUC1.NumBytes,
                                       DAG, IsAlias))
    return IsAlias;

  // The following all rely on MMO0 and MMO1 being valid. Fail conservatively if
  // either are not known.
  if (!MUC0.MMO || !MUC1.MMO)
    return true;

  // If one operation reads from invariant memory, and the other may store, they
  // cannot alias. These should really be checking the equivalent of mayWrite,
  // but it only matters for memory nodes other than load /store.
  if ((MUC0.MMO->isInvariant() && MUC1.MMO->isStore()) ||
      (MUC1.MMO->isInvariant() && MUC0.MMO->isStore()))
    return false;

  // If we know required SrcValue1 and SrcValue2 have relatively large
  // alignment compared to the size and offset of the access, we may be able
  // to prove they do not alias. This check is conservative for now to catch
  // cases created by splitting vector types, it only works when the offsets are
  // multiples of the size of the data.
  int64_t SrcValOffset0 = MUC0.MMO->getOffset();
  int64_t SrcValOffset1 = MUC1.MMO->getOffset();
  Align OrigAlignment0 = MUC0.MMO->getBaseAlign();
  Align OrigAlignment1 = MUC1.MMO->getBaseAlign();
  LocationSize Size0 = MUC0.NumBytes;
  LocationSize Size1 = MUC1.NumBytes;

  if (OrigAlignment0 == OrigAlignment1 && SrcValOffset0 != SrcValOffset1 &&
      Size0.hasValue() && Size1.hasValue() && !Size0.isScalable() &&
      !Size1.isScalable() && Size0 == Size1 &&
      OrigAlignment0 > Size0.getValue().getKnownMinValue() &&
      SrcValOffset0 % Size0.getValue().getKnownMinValue() == 0 &&
      SrcValOffset1 % Size1.getValue().getKnownMinValue() == 0) {
    int64_t OffAlign0 = SrcValOffset0 % OrigAlignment0.value();
    int64_t OffAlign1 = SrcValOffset1 % OrigAlignment1.value();

    // There is no overlap between these relatively aligned accesses of
    // similar size. Return no alias.
    if ((OffAlign0 + static_cast<int64_t>(
                         Size0.getValue().getKnownMinValue())) <= OffAlign1 ||
        (OffAlign1 + static_cast<int64_t>(
                         Size1.getValue().getKnownMinValue())) <= OffAlign0)
      return false;
  }

  bool UseAA = CombinerGlobalAA.getNumOccurrences() > 0
                   ? CombinerGlobalAA
                   : DAG.getSubtarget().useAA();
#ifndef NDEBUG
  if (CombinerAAOnlyFunc.getNumOccurrences() &&
      CombinerAAOnlyFunc != DAG.getMachineFunction().getName())
    UseAA = false;
#endif

  if (UseAA && AA && MUC0.MMO->getValue() && MUC1.MMO->getValue() &&
      Size0.hasValue() && Size1.hasValue() &&
      // Can't represent a scalable size + fixed offset in LocationSize
      (!Size0.isScalable() || SrcValOffset0 == 0) &&
      (!Size1.isScalable() || SrcValOffset1 == 0)) {
    // Use alias analysis information.
    int64_t MinOffset = std::min(SrcValOffset0, SrcValOffset1);
    int64_t Overlap0 =
        Size0.getValue().getKnownMinValue() + SrcValOffset0 - MinOffset;
    int64_t Overlap1 =
        Size1.getValue().getKnownMinValue() + SrcValOffset1 - MinOffset;
    LocationSize Loc0 =
        Size0.isScalable() ? Size0 : LocationSize::precise(Overlap0);
    LocationSize Loc1 =
        Size1.isScalable() ? Size1 : LocationSize::precise(Overlap1);
    if (AA->isNoAlias(
            MemoryLocation(MUC0.MMO->getValue(), Loc0,
                           UseTBAA ? MUC0.MMO->getAAInfo() : AAMDNodes()),
            MemoryLocation(MUC1.MMO->getValue(), Loc1,
                           UseTBAA ? MUC1.MMO->getAAInfo() : AAMDNodes())))
      return false;
  }

  // Otherwise we have to assume they alias.
  return true;
}

/// Walk up chain skipping non-aliasing memory nodes,
/// looking for aliasing nodes and adding them to the Aliases vector.
void DAGCombiner::GatherAllAliases(SDNode *N, SDValue OriginalChain,
                                   SmallVectorImpl<SDValue> &Aliases) {
  SmallVector<SDValue, 8> Chains;     // List of chains to visit.
  SmallPtrSet<SDNode *, 16> Visited;  // Visited node set.

  // Get alias information for node.
  // TODO: relax aliasing for unordered atomics (see D66309)
  const bool IsLoad = isa<LoadSDNode>(N) && cast<LoadSDNode>(N)->isSimple();

  // Starting off.
  Chains.push_back(OriginalChain);
  unsigned Depth = 0;

  // Attempt to improve chain by a single step
  auto ImproveChain = [&](SDValue &C) -> bool {
    switch (C.getOpcode()) {
    case ISD::EntryToken:
      // No need to mark EntryToken.
      C = SDValue();
      return true;
    case ISD::LOAD:
    case ISD::STORE: {
      // Get alias information for C.
      // TODO: Relax aliasing for unordered atomics (see D66309)
      bool IsOpLoad = isa<LoadSDNode>(C.getNode()) &&
                      cast<LSBaseSDNode>(C.getNode())->isSimple();
      if ((IsLoad && IsOpLoad) || !mayAlias(N, C.getNode())) {
        // Look further up the chain.
        C = C.getOperand(0);
        return true;
      }
      // Alias, so stop here.
      return false;
    }

    case ISD::CopyFromReg:
      // Always forward past CopyFromReg.
      C = C.getOperand(0);
      return true;

    case ISD::LIFETIME_START:
    case ISD::LIFETIME_END: {
      // We can forward past any lifetime start/end that can be proven not to
      // alias the memory access.
      if (!mayAlias(N, C.getNode())) {
        // Look further up the chain.
        C = C.getOperand(0);
        return true;
      }
      return false;
    }
    default:
      return false;
    }
  };

  // Look at each chain and determine if it is an alias.  If so, add it to the
  // aliases list.  If not, then continue up the chain looking for the next
  // candidate.
  while (!Chains.empty()) {
    SDValue Chain = Chains.pop_back_val();

    // Don't bother if we've seen Chain before.
    if (!Visited.insert(Chain.getNode()).second)
      continue;

    // For TokenFactor nodes, look at each operand and only continue up the
    // chain until we reach the depth limit.
    //
    // FIXME: The depth check could be made to return the last non-aliasing
    // chain we found before we hit a tokenfactor rather than the original
    // chain.
    if (Depth > TLI.getGatherAllAliasesMaxDepth()) {
      Aliases.clear();
      Aliases.push_back(OriginalChain);
      return;
    }

    if (Chain.getOpcode() == ISD::TokenFactor) {
      // We have to check each of the operands of the token factor for "small"
      // token factors, so we queue them up.  Adding the operands to the queue
      // (stack) in reverse order maintains the original order and increases the
      // likelihood that getNode will find a matching token factor (CSE.)
      if (Chain.getNumOperands() > 16) {
        Aliases.push_back(Chain);
        continue;
      }
      for (unsigned n = Chain.getNumOperands(); n;)
        Chains.push_back(Chain.getOperand(--n));
      ++Depth;
      continue;
    }
    // Everything else
    if (ImproveChain(Chain)) {
      // Updated Chain Found, Consider new chain if one exists.
      if (Chain.getNode())
        Chains.push_back(Chain);
      ++Depth;
      continue;
    }
    // No Improved Chain Possible, treat as Alias.
    Aliases.push_back(Chain);
  }
}

/// Walk up chain skipping non-aliasing memory nodes, looking for a better chain
/// (aliasing node.)
SDValue DAGCombiner::FindBetterChain(SDNode *N, SDValue OldChain) {
  if (OptLevel == CodeGenOptLevel::None)
    return OldChain;

  // Ops for replacing token factor.
  SmallVector<SDValue, 8> Aliases;

  // Accumulate all the aliases to this node.
  GatherAllAliases(N, OldChain, Aliases);

  // If no operands then chain to entry token.
  if (Aliases.empty())
    return DAG.getEntryNode();

  // If a single operand then chain to it.  We don't need to revisit it.
  if (Aliases.size() == 1)
    return Aliases[0];

  // Construct a custom tailored token factor.
  return DAG.getTokenFactor(SDLoc(N), Aliases);
}

// This function tries to collect a bunch of potentially interesting
// nodes to improve the chains of, all at once. This might seem
// redundant, as this function gets called when visiting every store
// node, so why not let the work be done on each store as it's visited?
//
// I believe this is mainly important because mergeConsecutiveStores
// is unable to deal with merging stores of different sizes, so unless
// we improve the chains of all the potential candidates up-front
// before running mergeConsecutiveStores, it might only see some of
// the nodes that will eventually be candidates, and then not be able
// to go from a partially-merged state to the desired final
// fully-merged state.

bool DAGCombiner::parallelizeChainedStores(StoreSDNode *St) {
  SmallVector<StoreSDNode *, 8> ChainedStores;
  StoreSDNode *STChain = St;
  // Intervals records which offsets from BaseIndex have been covered. In
  // the common case, every store writes to the immediately previous address
  // space and thus merged with the previous interval at insertion time.

  using IMap = llvm::IntervalMap<int64_t, std::monostate, 8,
                                 IntervalMapHalfOpenInfo<int64_t>>;
  IMap::Allocator A;
  IMap Intervals(A);

  // This holds the base pointer, index, and the offset in bytes from the base
  // pointer.
  const BaseIndexOffset BasePtr = BaseIndexOffset::match(St, DAG);

  // We must have a base and an offset.
  if (!BasePtr.getBase().getNode())
    return false;

  // Do not handle stores to undef base pointers.
  if (BasePtr.getBase().isUndef())
    return false;

  // Do not handle stores to opaque types
  if (St->getMemoryVT().isZeroSized())
    return false;

  // BaseIndexOffset assumes that offsets are fixed-size, which
  // is not valid for scalable vectors where the offsets are
  // scaled by `vscale`, so bail out early.
  if (St->getMemoryVT().isScalableVT())
    return false;

  // Add ST's interval.
  Intervals.insert(0, (St->getMemoryVT().getSizeInBits() + 7) / 8,
                   std::monostate{});

  while (StoreSDNode *Chain = dyn_cast<StoreSDNode>(STChain->getChain())) {
    if (Chain->getMemoryVT().isScalableVector())
      return false;

    // If the chain has more than one use, then we can't reorder the mem ops.
    if (!SDValue(Chain, 0)->hasOneUse())
      break;
    // TODO: Relax for unordered atomics (see D66309)
    if (!Chain->isSimple() || Chain->isIndexed())
      break;

    // Find the base pointer and offset for this memory node.
    const BaseIndexOffset Ptr = BaseIndexOffset::match(Chain, DAG);
    // Check that the base pointer is the same as the original one.
    int64_t Offset;
    if (!BasePtr.equalBaseIndex(Ptr, DAG, Offset))
      break;
    int64_t Length = (Chain->getMemoryVT().getSizeInBits() + 7) / 8;
    // Make sure we don't overlap with other intervals by checking the ones to
    // the left or right before inserting.
    auto I = Intervals.find(Offset);
    // If there's a next interval, we should end before it.
    if (I != Intervals.end() && I.start() < (Offset + Length))
      break;
    // If there's a previous interval, we should start after it.
    if (I != Intervals.begin() && (--I).stop() <= Offset)
      break;
    Intervals.insert(Offset, Offset + Length, std::monostate{});

    ChainedStores.push_back(Chain);
    STChain = Chain;
  }

  // If we didn't find a chained store, exit.
  if (ChainedStores.empty())
    return false;

  // Improve all chained stores (St and ChainedStores members) starting from
  // where the store chain ended and return single TokenFactor.
  SDValue NewChain = STChain->getChain();
  SmallVector<SDValue, 8> TFOps;
  for (unsigned I = ChainedStores.size(); I;) {
    StoreSDNode *S = ChainedStores[--I];
    SDValue BetterChain = FindBetterChain(S, NewChain);
    S = cast<StoreSDNode>(DAG.UpdateNodeOperands(
        S, BetterChain, S->getOperand(1), S->getOperand(2), S->getOperand(3)));
    TFOps.push_back(SDValue(S, 0));
    ChainedStores[I] = S;
  }

  // Improve St's chain. Use a new node to avoid creating a loop from CombineTo.
  SDValue BetterChain = FindBetterChain(St, NewChain);
  SDValue NewST;
  if (St->isTruncatingStore())
    NewST = DAG.getTruncStore(BetterChain, SDLoc(St), St->getValue(),
                              St->getBasePtr(), St->getMemoryVT(),
                              St->getMemOperand());
  else
    NewST = DAG.getStore(BetterChain, SDLoc(St), St->getValue(),
                         St->getBasePtr(), St->getMemOperand());

  TFOps.push_back(NewST);

  // If we improved every element of TFOps, then we've lost the dependence on
  // NewChain to successors of St and we need to add it back to TFOps. Do so at
  // the beginning to keep relative order consistent with FindBetterChains.
  auto hasImprovedChain = [&](SDValue ST) -> bool {
    return ST->getOperand(0) != NewChain;
  };
  bool AddNewChain = llvm::all_of(TFOps, hasImprovedChain);
  if (AddNewChain)
    TFOps.insert(TFOps.begin(), NewChain);

  SDValue TF = DAG.getTokenFactor(SDLoc(STChain), TFOps);
  CombineTo(St, TF);

  // Add TF and its operands to the worklist.
  AddToWorklist(TF.getNode());
  for (const SDValue &Op : TF->ops())
    AddToWorklist(Op.getNode());
  AddToWorklist(STChain);
  return true;
}

bool DAGCombiner::findBetterNeighborChains(StoreSDNode *St) {
  if (OptLevel == CodeGenOptLevel::None)
    return false;

  const BaseIndexOffset BasePtr = BaseIndexOffset::match(St, DAG);

  // We must have a base and an offset.
  if (!BasePtr.getBase().getNode())
    return false;

  // Do not handle stores to undef base pointers.
  if (BasePtr.getBase().isUndef())
    return false;

  // Directly improve a chain of disjoint stores starting at St.
  if (parallelizeChainedStores(St))
    return true;

  // Improve St's Chain..
  SDValue BetterChain = FindBetterChain(St, St->getChain());
  if (St->getChain() != BetterChain) {
    replaceStoreChain(St, BetterChain);
    return true;
  }
  return false;
}

/// This is the entry point for the file.
void SelectionDAG::Combine(CombineLevel Level, AliasAnalysis *AA,
                           CodeGenOptLevel OptLevel) {
  /// This is the main entry point to this class.
  DAGCombiner(*this, AA, OptLevel).Run(Level);
}