Fortran Extensions supported by Flang
.. contents::
:local:
As a general principle, this compiler will accept by default and without complaint many legacy features, extensions to the standard language, and features that have been deleted from the standard, so long as the recognition of those features would not cause a standard-conforming program to be rejected or misinterpreted.
Other non-standard features, which do conflict with the current standard specification of the Fortran programming language, are accepted if enabled by command-line options.
Intentional violations of the standard
- Scalar
INTEGER
actual argument expressions (not variables!) are converted to the kinds of scalar INTEGER
dummy arguments when the interface is explicit and the kinds differ. This conversion allows the results of the intrinsics like SIZE
that (as mentioned below) may return non-default INTEGER
results by default to be passed. A warning is emitted when truncation is possible. These conversions are not applied in calls to non-intrinsic generic procedures. - We are not strict on the contents of
BLOCK DATA
subprograms so long as they contain no executable code, no internal subprograms, and allocate no storage outside a named COMMON
block. (C1415) - Delimited list-directed (and NAMELIST) character output is required to emit contiguous doubled instances of the delimiter character when it appears in the output value. When fixed-size records are being emitted, as is the case with internal output, this is not possible when the problematic character falls on the last position of a record. No two other Fortran compilers do the same thing in this situation so there is no good precedent to follow. Because it seems least wrong, we emit one copy of the delimiter as the last character of the current record and another as the first character of the next record. (The second-least-wrong alternative might be to flag a runtime error, but that seems harsh since it's not an explicit error in the standard, and the output may not have to be usable later as input anyway.) Consequently, the output is not suitable for use as list-directed or NAMELIST input. If a later standard were to clarify this case, this behavior will change as needed to conform.
character(11) :: buffer(3)
character(10) :: quotes = '""""""""""'
write(buffer,*,delim="QUOTE") quotes
print "('>',a10,'<')", buffer
end
- The name of the control variable in an implied DO loop in an array constructor or DATA statement has a scope over the value-list only, not the bounds of the implied DO loop. It is not advisable to use an object of the same name as the index variable in a bounds expression, but it will work, instead of being needlessly undefined.
- If both the
COUNT=
and the COUNT_MAX=
optional arguments are present on the same call to the intrinsic subroutine SYSTEM_CLOCK
, we require that their types have the same integer kind, since the kind of these arguments is used to select the clock rate. In common with some other compilers, the clock is in milliseconds for kinds <= 4 and nanoseconds otherwise where the target system supports these rates.
Extensions, deletions, and legacy features supported by default
- Tabs in source
<>
as synonym for .NE.
and /=
$
and @
as legal characters in names- Initialization in type declaration statements using
/values/
- Kind specification with
*
, e.g. REAL*4
DOUBLE COMPLEX
- Signed complex literal constants
- DEC
STRUCTURE
, RECORD
, UNION
, and MAP
- Structure field access with
.field
BYTE
as synonym for INTEGER(KIND=1)
- Quad precision REAL literals with
Q
X
prefix/suffix as synonym for Z
on hexadecimal literalsB
, O
, Z
, and X
accepted as suffixes as well as prefixes- Triplets allowed in array constructors
%LOC
, %VAL
, and %REF
- Leading comma allowed before I/O item list
- Empty parentheses allowed in
PROGRAM P()
- Missing parentheses allowed in
FUNCTION F
- Cray based
POINTER(p,x)
and LOC()
intrinsic (with %LOC()
as an alias) - Arithmetic
IF
. (Which branch should NaN take? Fall through?) ASSIGN
statement, assigned GO TO
, and assigned formatPAUSE
statement- Hollerith literals and edit descriptors
NAMELIST
allowed in the execution part- Omitted colons on type declaration statements with attributes
- COMPLEX constructor expression, e.g.
(x+y,z)
+
and -
before all primary expressions, e.g. x*-y
.NOT. .NOT.
acceptedNAME=
as synonym for FILE=
- Data edit descriptors without width or other details
D
lines in fixed form as comments or debug codeCARRIAGECONTROL=
on the OPEN and INQUIRE statementsCONVERT=
on the OPEN and INQUIRE statementsDISPOSE=
on the OPEN and INQUIRE statements- Leading semicolons are ignored before any statement that could have a label
- The character
&
in column 1 in fixed form source is a variant form of continuation line. - Character literals as elements of an array constructor without an explicit type specifier need not have the same length; the longest literal determines the length parameter of the implicit type, not the first.
- Outside a character literal, a comment after a continuation marker (&) need not begin with a comment marker (!).
- Classic C-style /comments/ are skipped, so multi-language header files are easier to write and use.
- $ and \ edit descriptors are supported in FORMAT to suppress newline output on user prompts.
- Tabs in format strings (not
FORMAT
statements) are allowed on output. - REAL and DOUBLE PRECISION variable and bounds in DO loops
- Integer literals without explicit kind specifiers that are out of range for the default kind of INTEGER are assumed to have the least larger kind that can hold them, if one exists.
- BOZ literals can be used as INTEGER values in contexts where the type is unambiguous: the right hand sides of assigments and initializations of INTEGER entities, and as actual arguments to a few intrinsic functions (ACHAR, BTEST, CHAR). BOZ literals are interpreted as default INTEGER when they appear as the first items of array constructors with no explicit type. Otherwise, they generally cannot be used if the type would not be known (e.g.,
IAND(X'1',X'2')
). - BOZ literals can also be used as REAL values in some contexts where the type is unambiguous, such as initializations of REAL parameters.
- EQUIVALENCE of numeric and character sequences (a ubiquitous extension)
- Values for whole anonymous parent components in structure constructors (e.g.,
EXTENDEDTYPE(PARENTTYPE(1,2,3))
rather than EXTENDEDTYPE(1,2,3)
or EXTENDEDTYPE(PARENTTYPE=PARENTTYPE(1,2,3))
). - Some intrinsic functions are specified in the standard as requiring the same type and kind for their arguments (viz., ATAN with two arguments, ATAN2, DIM, HYPOT, MAX, MIN, MOD, and MODULO); we allow distinct types to be used, promoting the arguments as if they were operands to an intrinsic
+
operator, and defining the result type accordingly. - DOUBLE COMPLEX intrinsics DREAL, DCMPLX, DCONJG, and DIMAG.
- The DFLOAT intrinsic function.
- INT_PTR_KIND intrinsic returns the kind of c_intptr_t.
- Restricted specific conversion intrinsics FLOAT, SNGL, IDINT, IFIX, DREAL, and DCMPLX accept arguments of any kind instead of only the default kind or double precision kind. Their result kinds remain as specified.
- Specific intrinsics AMAX0, AMAX1, AMIN0, AMIN1, DMAX1, DMIN1, MAX0, MAX1, MIN0, and MIN1 accept more argument types than specified. They are replaced by the related generics followed by conversions to the specified result types.
- When a scalar CHARACTER actual argument of the same kind is known to have a length shorter than the associated dummy argument, it is extended on the right with blanks, similar to assignment.
- When a dummy argument is
POINTER
or ALLOCATABLE
and is INTENT(IN)
, we relax enforcement of some requirements on actual arguments that must otherwise hold true for definable arguments. - Assignment of
LOGICAL
to INTEGER
and vice versa (but not other types) is allowed. The values are normalized. - An effectively empty source file (no program unit) is accepted and produces an empty relocatable output file.
- A
RETURN
statement may appear in a main program. - DATA statement initialization is allowed for procedure pointers outside structure constructors.
- Nonstandard intrinsic functions: ISNAN, SIZEOF
- A forward reference to a default INTEGER scalar dummy argument is permitted to appear in a specification expression, such as an array bound, in a scope with IMPLICIT NONE(TYPE) if the name of the dummy argument would have caused it to be implicitly typed as default INTEGER if IMPLICIT NONE(TYPE) were absent.
- OPEN(ACCESS=‘APPEND’) is interpreted as OPEN(POSITION=‘APPEND’) to ease porting from Sun Fortran.
- Intrinsic subroutines EXIT([status]) and ABORT()
- The definition of simple contiguity in 9.5.4 applies only to arrays; we also treat scalars as being trivially contiguous, so that they can be used in contexts like data targets in pointer assignments with bounds remapping.
- We support some combinations of specific procedures in generic interfaces that a strict reading of the standard would preclude when their calls must nonetheless be distinguishable. Specifically,
ALLOCATABLE
dummy arguments are distinguishing if an actual argument acceptable to one could not be passed to the other & vice versa because exactly one is polymorphic or exactly one is unlimited polymorphic). - External unit 0 is predefined and connected to the standard error output, and defined as
ERROR_UNIT
in the intrinsic ISO_FORTRAN_ENV
module.
Extensions supported when enabled by options
- C-style backslash escape sequences in quoted CHARACTER literals (but not Hollerith) [-fbackslash]
- Logical abbreviations
.T.
, .F.
, .N.
, .A.
, .O.
, and .X.
[-flogical-abbreviations] .XOR.
as a synonym for .NEQV.
[-fxor-operator]- The default
INTEGER
type is required by the standard to occupy the same amount of storage as the default REAL
type. Default REAL
is of course 32-bit IEEE-754 floating-point today. This legacy rule imposes an artificially small constraint in some cases where Fortran mandates that something have the default INTEGER
type: specifically, the results of references to the intrinsic functions SIZE
, STORAGE_SIZE
,LBOUND
, UBOUND
, SHAPE
, and the location reductions FINDLOC
, MAXLOC
, and MINLOC
in the absence of an explicit KIND=
actual argument. We return INTEGER(KIND=8)
by default in these cases when the -flarge-sizes
option is enabled. SIZEOF
and C_SIZEOF
always return INTEGER(KIND=8)
. - Treat each specification-part like is has
IMPLICIT NONE
[-fimplicit-none-type-always] - Ignore occurrences of
IMPLICIT NONE
and IMPLICIT NONE(TYPE)
[-fimplicit-none-type-never] - Old-style
PARAMETER pi=3.14
statement without parentheses [-falternative-parameter-statement]
Extensions and legacy features deliberately not supported
.LG.
as synonym for .NE.
REDIMENSION
- Allocatable
COMMON
- Expressions in formats
ACCEPT
as synonym for READ *
TYPE
as synonym for PRINT
ARRAY
as synonym for DIMENSION
VIRTUAL
as synonym for DIMENSION
ENCODE
and DECODE
as synonyms for internal I/OIMPLICIT AUTOMATIC
, IMPLICIT STATIC
- Default exponent of zero, e.g.
3.14159E
- Characters in defined operators that are neither letters nor digits
B
suffix on unquoted octal constantsZ
prefix on unquoted hexadecimal constants (dangerous)T
and F
as abbreviations for .TRUE.
and .FALSE.
in DATA (PGI/XLF)- Use of host FORMAT labels in internal subprograms (PGI-only feature)
- ALLOCATE(TYPE(derived)::...) as variant of correct ALLOCATE(derived::...) (PGI only)
- Defining an explicit interface for a subprogram within itself (PGI only)
- USE association of a procedure interface within that same procedure's definition
- NULL() as a structure constructor expression for an ALLOCATABLE component (PGI).
- Conversion of LOGICAL to INTEGER in expressions.
- IF (integer expression) THEN ... END IF (PGI/Intel)
- Comparsion of LOGICAL with ==/.EQ. rather than .EQV. (also .NEQV.) (PGI/Intel)
- Procedure pointers in COMMON blocks (PGI/Intel)
- Underindexing multi-dimensional arrays (e.g., A(1) rather than A(1,1)) (PGI only)
- Legacy PGI
NCHARACTER
type and NC
Kanji character literals - Using non-integer expressions for array bounds (e.g., REAL A(3.14159)) (PGI/Intel)
- Mixing INTEGER types as operands to bit intrinsics (e.g., IAND); only two compilers support it, and they disagree on sign extension.
- Module & program names that conflict with an object inside the unit (PGI only).
- When the same name is brought into scope via USE association from multiple modules, the name must refer to a generic interface; PGI allows a name to be a procedure from one module and a generic interface from another.
- Type parameter declarations must come first in a derived type definition; some compilers allow them to follow
PRIVATE
, or be intermixed with the component declarations. - Wrong argument types in calls to specific intrinsics that have different names than the related generics. Some accepted exceptions are listed above in the allowed extensions. PGI, Intel, and XLF support this in ways that are not numerically equivalent. PGI converts the arguments while Intel and XLF replace the specific by the related generic.
Preprocessing behavior
- The preprocessor is always run, whatever the filename extension may be.
- We respect Fortran comments in macro actual arguments (like GNU, Intel, NAG; unlike PGI and XLF) on the principle that macro calls should be treated like function references. Fortran's line continuation methods also work.
Standard features not silently accepted
- Fortran explicitly ignores type declaration statements when they attempt to type the name of a generic intrinsic function (8.2 p3). One can declare
CHARACTER::COS
and still get a real result from COS(3.14159)
, for example. f18 will complain when a generic intrinsic function's inferred result type does not match an explicit declaration. This message is a warning.
Standard features that might as well not be
- f18 supports designators with constant expressions, properly constrained, as initial data targets for data pointers in initializers of variable and component declarations and in
DATA
statements; e.g., REAL, POINTER :: P => T(1:10:2)
. This Fortran 2008 feature might as well be viewed like an extension; no other compiler that we've tested can handle it yet.
Behavior in cases where the standard is ambiguous or indefinite
- When an inner procedure of a subprogram uses the value or an attribute of an undeclared name in a specification expression and that name does not appear in the host, it is not clear in the standard whether that name is an implicitly typed local variable of the inner procedure or a host association with an implicitly typed local variable of the host. For example:
module module
contains
subroutine host(j)
! Although "m" never appears in the specification or executable
! parts of this subroutine, both of its contained subroutines
! might be accessing it via host association.
integer, intent(in out) :: j
call inner1(j)
call inner2(j)
contains
subroutine inner1(n)
integer(kind(m)), intent(in) :: n
m = n + 1
end subroutine
subroutine inner2(n)
integer(kind(m)), intent(out) :: n
n = m + 2
end subroutine
end subroutine
end module
program demo
use module
integer :: k
k = 0
call host(k)
print *, k, " should be 3"
end
Other Fortran compilers disagree in their interpretations of this example; some seem to treat the references to m
as if they were host associations to an implicitly typed variable (and print 3
), while others seem to treat them as references to implicitly typed local variabless, and load uninitialized values.
In f18, we chose to emit an error message for this case since the standard is unclear, the usage is not portable, and the issue can be easily resolved by adding a declaration.
- In subclause 7.5.6.2 of Fortran 2018 the standard defines a partial ordering of the final subroutine calls for finalizable objects, their non-parent components, and then their parent components. (The object is finalized, then the non-parent components of each element, and then the parent component.) Some have argued that the standard permits an implementation to finalize the parent component before finalizing an allocatable component in the context of deallocation, and the next revision of the language may codify this option. In the interest of avoiding needless confusion, this compiler implements what we believe to be the least surprising order of finalization. Specifically: all non-parent components are finalized before the parent, allocatable or not; all finalization takes place before any deallocation; and no object or subobject will be finalized more than once.