blob: 91450472398e0d0c555fd3f906515afa15edf03a [file] [log] [blame]
; This file verifies the behavior of the OptBisect class, which is used to
; diagnose optimization related failures. The tests check various
; invocations that result in different sets of optimization passes that
; are run in different ways.
;
; Because the exact set of optimizations that will be run is expected to
; change over time, the checks for disabling passes are written in a
; conservative way that avoids assumptions about which specific passes
; will be disabled.
; RUN: opt -disable-output -disable-verify \
; RUN: -passes=inferattrs -opt-bisect-limit=-1 %s 2>&1 \
; RUN: | FileCheck %s --check-prefix=CHECK-MODULE-PASS
; CHECK-MODULE-PASS: BISECT: running pass (1) InferFunctionAttrsPass on [module]
; RUN: opt -disable-output -disable-verify \
; RUN: -passes=inferattrs -opt-bisect-limit=0 %s 2>&1 \
; RUN: | FileCheck %s --check-prefix=CHECK-LIMIT-MODULE-PASS
; CHECK-LIMIT-MODULE-PASS: BISECT: NOT running pass (1) InferFunctionAttrsPass on [module]
; RUN: opt -disable-output -debug-pass-manager \
; RUN: -passes=inferattrs -opt-bisect-limit=-1 %s 2>&1 \
; RUN: | FileCheck %s --check-prefix=CHECK-REQUIRED-PASS
; CHECK-REQUIRED-PASS-NOT: BISECT: {{.*}} VerifierPass
; CHECK-REQUIRED-PASS: Running pass: VerifierPass
; CHECK-REQUIRED-PASS: BISECT: running pass (1) InferFunctionAttrsPass on [module]
; CHECK-REQUIRED-PASS-NOT: BISECT: {{.*}} VerifierPass
; CHECK-REQUIRED-PASS: Running pass: VerifierPass
; RUN: opt -disable-output -debug-pass-manager \
; RUN: -passes=inferattrs -opt-bisect-limit=0 %s 2>&1 \
; RUN: | FileCheck %s --check-prefix=CHECK-LIMIT-REQUIRED-PASS
; CHECK-LIMIT-REQUIRED-PASS-NOT: BISECT: {{.*}} VerifierPass
; CHECK-LIMIT-REQUIRED-PASS: Running pass: VerifierPass
; CHECK-LIMIT-REQUIRED-PASS: BISECT: NOT running pass (1) InferFunctionAttrsPass on [module]
; CHECK-LIMIT-REQUIRED-PASS-NOT: BISECT: {{.*}} VerifierPass
; CHECK-LIMIT-REQUIRED-PASS: Running pass: VerifierPass
; RUN: opt -disable-output -disable-verify \
; RUN: -passes=early-cse -opt-bisect-limit=-1 %s 2>&1 \
; RUN: | FileCheck %s --check-prefix=CHECK-FUNCTION-PASS
; CHECK-FUNCTION-PASS: BISECT: running pass (1) EarlyCSEPass on f1
; CHECK-FUNCTION-PASS: BISECT: running pass (2) EarlyCSEPass on f2
; CHECK-FUNCTION-PASS: BISECT: running pass (3) EarlyCSEPass on f3
; CHECK-FUNCTION-PASS: BISECT: running pass (4) EarlyCSEPass on f4
; RUN: opt -disable-output -disable-verify \
; RUN: -passes=early-cse -opt-bisect-limit=2 %s 2>&1 \
; RUN: | FileCheck %s --check-prefix=CHECK-LIMIT-FUNCTION-PASS
; CHECK-LIMIT-FUNCTION-PASS: BISECT: running pass (1) EarlyCSEPass on f1
; CHECK-LIMIT-FUNCTION-PASS: BISECT: running pass (2) EarlyCSEPass on f2
; CHECK-LIMIT-FUNCTION-PASS: BISECT: NOT running pass (3) EarlyCSEPass on f3
; CHECK-LIMIT-FUNCTION-PASS: BISECT: NOT running pass (4) EarlyCSEPass on f4
; RUN: opt -disable-output -disable-verify \
; RUN: -passes=function-attrs -opt-bisect-limit=-1 %s 2>&1 \
; RUN: | FileCheck %s --check-prefix=CHECK-CGSCC-PASS
; CHECK-CGSCC-PASS: BISECT: running pass (1) PostOrderFunctionAttrsPass on (f1)
; CHECK-CGSCC-PASS: BISECT: running pass (2) PostOrderFunctionAttrsPass on (f2)
; CHECK-CGSCC-PASS: BISECT: running pass (3) PostOrderFunctionAttrsPass on (f3)
; CHECK-CGSCC-PASS: BISECT: running pass (4) PostOrderFunctionAttrsPass on (f4)
; RUN: opt -disable-output -disable-verify \
; RUN: -passes=function-attrs -opt-bisect-limit=3 %s 2>&1 \
; RUN: | FileCheck %s --check-prefix=CHECK-LIMIT-CGSCC-PASS
; CHECK-LIMIT-CGSCC-PASS: BISECT: running pass (1) PostOrderFunctionAttrsPass on (f1)
; CHECK-LIMIT-CGSCC-PASS: BISECT: running pass (2) PostOrderFunctionAttrsPass on (f2)
; CHECK-LIMIT-CGSCC-PASS: BISECT: running pass (3) PostOrderFunctionAttrsPass on (f3)
; CHECK-LIMIT-CGSCC-PASS: BISECT: NOT running pass (4) PostOrderFunctionAttrsPass on (f4)
; RUN: opt -disable-output -disable-verify -opt-bisect-limit=-1 \
; RUN: -passes='inferattrs,cgscc(function-attrs,function(early-cse))' %s 2>&1 \
; RUN: | FileCheck %s --check-prefix=CHECK-MULTI-PASS
; CHECK-MULTI-PASS: BISECT: running pass (1) InferFunctionAttrsPass on [module]
; CHECK-MULTI-PASS: BISECT: running pass (2) PostOrderFunctionAttrsPass on (f1)
; CHECK-MULTI-PASS: BISECT: running pass (3) EarlyCSEPass on f1
; CHECK-MULTI-PASS: BISECT: running pass (4) PostOrderFunctionAttrsPass on (f2)
; CHECK-MULTI-PASS: BISECT: running pass (5) EarlyCSEPass on f2
; CHECK-MULTI-PASS: BISECT: running pass (6) PostOrderFunctionAttrsPass on (f3)
; CHECK-MULTI-PASS: BISECT: running pass (7) EarlyCSEPass on f3
; CHECK-MULTI-PASS: BISECT: running pass (8) PostOrderFunctionAttrsPass on (f4)
; CHECK-MULTI-PASS: BISECT: running pass (9) EarlyCSEPass on f4
; RUN: opt -disable-output -disable-verify -opt-bisect-limit=7 \
; RUN: -passes='inferattrs,cgscc(function-attrs,function(early-cse))' %s 2>&1 \
; RUN: | FileCheck %s --check-prefix=CHECK-LIMIT-MULTI-PASS
; CHECK-LIMIT-MULTI-PASS: BISECT: running pass (1) InferFunctionAttrsPass on [module]
; CHECK-LIMIT-MULTI-PASS: BISECT: running pass (2) PostOrderFunctionAttrsPass on (f1)
; CHECK-LIMIT-MULTI-PASS: BISECT: running pass (3) EarlyCSEPass on f1
; CHECK-LIMIT-MULTI-PASS: BISECT: running pass (4) PostOrderFunctionAttrsPass on (f2)
; CHECK-LIMIT-MULTI-PASS: BISECT: running pass (5) EarlyCSEPass on f2
; CHECK-LIMIT-MULTI-PASS: BISECT: running pass (6) PostOrderFunctionAttrsPass on (f3)
; CHECK-LIMIT-MULTI-PASS: BISECT: running pass (7) EarlyCSEPass on f3
; CHECK-LIMIT-MULTI-PASS: BISECT: NOT running pass (8) PostOrderFunctionAttrsPass on (f4)
; CHECK-LIMIT-MULTI-PASS: BISECT: NOT running pass (9) EarlyCSEPass on f4
; Make sure we don't skip writing the output to stdout.
; RUN: opt %s -opt-bisect-limit=0 -passes=early-cse | opt -S | FileCheck %s -check-prefix=CHECK-OUTPUT
; RUN: opt %s -opt-bisect-limit=0 -passes=early-cse -S | FileCheck %s -check-prefix=CHECK-OUTPUT
; CHECK-OUTPUT: define void @f1
declare i32 @g()
define void @f1() {
entry:
br label %loop.0
loop.0:
br i1 undef, label %loop.0.0, label %loop.1
loop.0.0:
br i1 undef, label %loop.0.0, label %loop.0.1
loop.0.1:
br i1 undef, label %loop.0.1, label %loop.0
loop.1:
br i1 undef, label %loop.1, label %loop.1.bb1
loop.1.bb1:
br i1 undef, label %loop.1, label %loop.1.bb2
loop.1.bb2:
br i1 undef, label %end, label %loop.1.0
loop.1.0:
br i1 undef, label %loop.1.0, label %loop.1
end:
ret void
}
define i32 @f2() {
entry:
ret i32 0
}
define i32 @f3() {
entry:
%temp = call i32 @g()
%icmp = icmp ugt i32 %temp, 2
br i1 %icmp, label %bb.true, label %bb.false
bb.true:
%temp2 = call i32 @f2()
ret i32 %temp2
bb.false:
ret i32 0
}
; This function is here to verify that opt-bisect can skip all passes for
; functions that contain lifetime intrinsics.
define void @f4() {
entry:
%i = alloca i32, align 4
%tmp = bitcast i32* %i to i8*
call void @llvm.lifetime.start(i64 4, i8* %tmp)
br label %for.cond
for.cond:
br i1 undef, label %for.body, label %for.end
for.body:
br label %for.cond
for.end:
ret void
}
declare void @llvm.lifetime.start(i64, i8* nocapture)