| # REQUIRES: x86 |
| |
| # RUN: llvm-mc -filetype=obj -triple x86_64-pc-linux %s -o %t |
| # RUN: %lldb %t -o "settings set interpreter.stop-command-source-on-error false" \ |
| # RUN: -o "settings set stop-disassembly-max-size 8000" \ |
| # RUN: -s %S/Inputs/command-disassemble.lldbinit -o exit 2>&1 | FileCheck %s |
| |
| # CHECK: (lldb) disassemble |
| # CHECK-NEXT: error: Cannot disassemble around the current function without a selected frame. |
| # CHECK-NEXT: (lldb) disassemble --line |
| # CHECK-NEXT: error: Cannot disassemble around the current line without a selected frame. |
| # CHECK-NEXT: (lldb) disassemble --frame |
| # CHECK-NEXT: error: Cannot disassemble around the current function without a selected frame. |
| # CHECK-NEXT: (lldb) disassemble --pc |
| # CHECK-NEXT: error: Cannot disassemble around the current PC without a selected frame. |
| # CHECK-NEXT: (lldb) disassemble --start-address 0x0 |
| # CHECK-NEXT: command-disassemble.s.tmp`foo: |
| # CHECK-NEXT: command-disassemble.s.tmp[0x0] <+0>: int $0x10 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x2] <+2>: int $0x11 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x4] <+4>: int $0x12 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x6] <+6>: int $0x13 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x8] <+8>: int $0x14 |
| # CHECK-NEXT: command-disassemble.s.tmp[0xa] <+10>: int $0x15 |
| # CHECK-NEXT: command-disassemble.s.tmp[0xc] <+12>: int $0x16 |
| # CHECK-EMPTY: |
| # CHECK-NEXT: command-disassemble.s.tmp`bar: |
| # CHECK-NEXT: command-disassemble.s.tmp[0xe] <+0>: int $0x17 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x10] <+2>: int $0x18 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x12] <+4>: int $0x19 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x14] <+6>: int $0x1a |
| # CHECK-NEXT: command-disassemble.s.tmp[0x16] <+8>: int $0x1b |
| # CHECK-NEXT: command-disassemble.s.tmp[0x18] <+10>: int $0x1c |
| # CHECK-NEXT: command-disassemble.s.tmp[0x1a] <+12>: int $0x1d |
| # CHECK-NEXT: command-disassemble.s.tmp[0x1c] <+14>: int $0x1e |
| # CHECK-NEXT: command-disassemble.s.tmp[0x1e] <+16>: int $0x1f |
| # CHECK-NEXT: (lldb) disassemble --start-address 0x4 --end-address 0x8 |
| # CHECK-NEXT: command-disassemble.s.tmp`foo: |
| # CHECK-NEXT: command-disassemble.s.tmp[0x4] <+4>: int $0x12 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x6] <+6>: int $0x13 |
| # CHECK-NEXT: (lldb) disassemble --start-address 0x8 --end-address 0x4 |
| # CHECK-NEXT: error: End address before start address. |
| # CHECK-NEXT: (lldb) disassemble --address 0x0 |
| # CHECK-NEXT: command-disassemble.s.tmp`foo: |
| # CHECK-NEXT: command-disassemble.s.tmp[0x0] <+0>: int $0x10 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x2] <+2>: int $0x11 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x4] <+4>: int $0x12 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x6] <+6>: int $0x13 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x8] <+8>: int $0x14 |
| # CHECK-NEXT: command-disassemble.s.tmp[0xa] <+10>: int $0x15 |
| # CHECK-NEXT: command-disassemble.s.tmp[0xc] <+12>: int $0x16 |
| # CHECK-NEXT: (lldb) disassemble --address 0xdeadb |
| # CHECK-NEXT: error: Could not find function bounds for address 0xdeadb |
| # CHECK-NEXT: (lldb) disassemble --address 0x100 |
| # CHECK-NEXT: error: Not disassembling the function because it is very large [0x0000000000000040-0x0000000000002040). To disassemble specify an instruction count limit, start/stop addresses or use the --force option. |
| # CHECK-NEXT: (lldb) disassemble --address 0x100 --count 3 |
| # CHECK-NEXT: command-disassemble.s.tmp`very_long: |
| # CHECK-NEXT: command-disassemble.s.tmp[0x40] <+0>: int $0x2a |
| # CHECK-NEXT: command-disassemble.s.tmp[0x42] <+2>: int $0x2a |
| # CHECK-NEXT: command-disassemble.s.tmp[0x44] <+4>: int $0x2a |
| # CHECK-NEXT: (lldb) disassemble --address 0x100 --force |
| # CHECK-NEXT: command-disassemble.s.tmp`very_long: |
| # CHECK-NEXT: command-disassemble.s.tmp[0x40] <+0>: int $0x2a |
| # CHECK: command-disassemble.s.tmp[0x203e] <+8190>: int $0x2a |
| # CHECK-NEXT: (lldb) disassemble --start-address 0x0 --count 7 |
| # CHECK-NEXT: command-disassemble.s.tmp`foo: |
| # CHECK-NEXT: command-disassemble.s.tmp[0x0] <+0>: int $0x10 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x2] <+2>: int $0x11 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x4] <+4>: int $0x12 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x6] <+6>: int $0x13 |
| # CHECK-NEXT: command-disassemble.s.tmp[0x8] <+8>: int $0x14 |
| # CHECK-NEXT: command-disassemble.s.tmp[0xa] <+10>: int $0x15 |
| # CHECK-NEXT: command-disassemble.s.tmp[0xc] <+12>: int $0x16 |
| # CHECK-NEXT: (lldb) disassemble --start-address 0x0 --end-address 0x20 --count 7 |
| # CHECK-NEXT: error: invalid combination of options for the given command |
| # CHECK-NEXT: (lldb) disassemble --name case1 |
| # CHECK-NEXT: command-disassemble.s.tmp`n1::case1: |
| # CHECK-NEXT: command-disassemble.s.tmp[0x2040] <+0>: int $0x30 |
| # CHECK-EMPTY: |
| # CHECK-NEXT: command-disassemble.s.tmp`n2::case1: |
| # CHECK-NEXT: command-disassemble.s.tmp[0x2042] <+0>: int $0x31 |
| # CHECK-EMPTY: |
| # CHECK-NEXT: (lldb) disassemble --name case2 |
| # CHECK-NEXT: command-disassemble.s.tmp`n1::case2: |
| # CHECK-NEXT: command-disassemble.s.tmp[0x2044] <+0>: int $0x32 |
| # CHECK-NEXT: warning: Not disassembling a range because it is very large [0x0000000000002046-0x0000000000004046). To disassemble specify an instruction count limit, start/stop addresses or use the --force option. |
| # CHECK-NEXT: (lldb) disassemble --name case3 |
| # CHECK-NEXT: error: Not disassembling a range because it is very large [0x0000000000004046-0x0000000000006046). To disassemble specify an instruction count limit, start/stop addresses or use the --force option. |
| # CHECK-NEXT: Not disassembling a range because it is very large [0x0000000000006046-0x0000000000008046). To disassemble specify an instruction count limit, start/stop addresses or use the --force option. |
| # CHECK-NEXT: (lldb) disassemble --name case3 --count 3 |
| # CHECK-NEXT: command-disassemble.s.tmp`n1::case3: |
| # CHECK-NEXT: command-disassemble.s.tmp[0x4046] <+0>: int $0x2a |
| # CHECK-NEXT: command-disassemble.s.tmp[0x4048] <+2>: int $0x2a |
| # CHECK-NEXT: command-disassemble.s.tmp[0x404a] <+4>: int $0x2a |
| # CHECK-EMPTY: |
| # CHECK-NEXT: command-disassemble.s.tmp`n2::case3: |
| # CHECK-NEXT: command-disassemble.s.tmp[0x6046] <+0>: int $0x2a |
| # CHECK-NEXT: command-disassemble.s.tmp[0x6048] <+2>: int $0x2a |
| # CHECK-NEXT: command-disassemble.s.tmp[0x604a] <+4>: int $0x2a |
| # CHECK-EMPTY: |
| |
| |
| .text |
| foo: |
| int $0x10 |
| int $0x11 |
| int $0x12 |
| int $0x13 |
| int $0x14 |
| int $0x15 |
| int $0x16 |
| bar: |
| int $0x17 |
| int $0x18 |
| int $0x19 |
| int $0x1a |
| int $0x1b |
| int $0x1c |
| int $0x1d |
| int $0x1e |
| int $0x1f |
| int $0x20 |
| int $0x21 |
| int $0x22 |
| int $0x23 |
| int $0x24 |
| int $0x25 |
| int $0x26 |
| int $0x27 |
| int $0x28 |
| int $0x29 |
| int $0x2a |
| int $0x2b |
| int $0x2c |
| int $0x2d |
| int $0x2e |
| int $0x2f |
| |
| very_long: |
| .rept 0x1000 |
| int $42 |
| .endr |
| |
| _ZN2n15case1Ev: |
| int $0x30 |
| |
| _ZN2n25case1Ev: |
| int $0x31 |
| |
| _ZN2n15case2Ev: |
| int $0x32 |
| |
| _ZN2n25case2Ev: |
| .rept 0x1000 |
| int $42 |
| .endr |
| |
| _ZN2n15case3Ev: |
| .rept 0x1000 |
| int $42 |
| .endr |
| |
| _ZN2n25case3Ev: |
| .rept 0x1000 |
| int $42 |
| .endr |
