; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
; RUN: opt -S -instcombine < %s | FileCheck %s

; Combine equality comparisons of adjacent extracted integers parts into
; a comparison of a larger part. Start with some examples...

declare void @use.i32(i32)
declare void @use.i8(i8)
declare void @use.i1(i1)

define i1 @eq_10(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_10(
; CHECK-NEXT:    [[TMP1:%.*]] = trunc i32 [[X:%.*]] to i16
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i32 [[Y:%.*]] to i16
; CHECK-NEXT:    [[TMP3:%.*]] = icmp eq i16 [[TMP1]], [[TMP2]]
; CHECK-NEXT:    ret i1 [[TMP3]]
;
  %x.0 = trunc i32 %x to i8
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %y.0 = trunc i32 %y to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %c.0 = icmp eq i8 %x.0, %y.0
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.10 = and i1 %c.0, %c.1
  ret i1 %c.10
}

define i1 @eq_210(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_210(
; CHECK-NEXT:    [[TMP1:%.*]] = trunc i32 [[X:%.*]] to i24
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i32 [[Y:%.*]] to i24
; CHECK-NEXT:    [[TMP3:%.*]] = icmp eq i24 [[TMP1]], [[TMP2]]
; CHECK-NEXT:    ret i1 [[TMP3]]
;
  %x.0 = trunc i32 %x to i8
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.0 = trunc i32 %y to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.0 = icmp eq i8 %x.0, %y.0
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.10 = and i1 %c.0, %c.1
  %c.210 = and i1 %c.2, %c.10
  ret i1 %c.210
}

define i1 @eq_3210(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_3210(
; CHECK-NEXT:    [[TMP1:%.*]] = icmp eq i32 [[X:%.*]], [[Y:%.*]]
; CHECK-NEXT:    ret i1 [[TMP1]]
;
  %x.0 = trunc i32 %x to i8
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %x.3.ext = lshr i32 %x, 24
  %x.3 = trunc i32 %x.3.ext to i8
  %y.0 = trunc i32 %y to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %y.3.ext = lshr i32 %y, 24
  %y.3 = trunc i32 %y.3.ext to i8
  %c.0 = icmp eq i8 %x.0, %y.0
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.3 = icmp eq i8 %x.3, %y.3
  %c.10 = and i1 %c.0, %c.1
  %c.210 = and i1 %c.2, %c.10
  %c.3210 = and i1 %c.3, %c.210
  ret i1 %c.3210
}

define i1 @eq_21(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_21(
; CHECK-NEXT:    [[TMP1:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i32 [[TMP1]] to i16
; CHECK-NEXT:    [[TMP3:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[TMP4:%.*]] = trunc i32 [[TMP3]] to i16
; CHECK-NEXT:    [[TMP5:%.*]] = icmp eq i16 [[TMP2]], [[TMP4]]
; CHECK-NEXT:    ret i1 [[TMP5]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = and i1 %c.2, %c.1
  ret i1 %c.210
}

; Test commuted variants of eq_21.

define i1 @eq_21_comm_and(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_21_comm_and(
; CHECK-NEXT:    [[TMP1:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i32 [[TMP1]] to i16
; CHECK-NEXT:    [[TMP3:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[TMP4:%.*]] = trunc i32 [[TMP3]] to i16
; CHECK-NEXT:    [[TMP5:%.*]] = icmp eq i16 [[TMP2]], [[TMP4]]
; CHECK-NEXT:    ret i1 [[TMP5]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = and i1 %c.1, %c.2
  ret i1 %c.210
}

define i1 @eq_21_comm_eq(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_21_comm_eq(
; CHECK-NEXT:    [[TMP1:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i32 [[TMP1]] to i16
; CHECK-NEXT:    [[TMP3:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[TMP4:%.*]] = trunc i32 [[TMP3]] to i16
; CHECK-NEXT:    [[TMP5:%.*]] = icmp eq i16 [[TMP2]], [[TMP4]]
; CHECK-NEXT:    ret i1 [[TMP5]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %y.2, %x.2
  %c.210 = and i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @eq_21_comm_eq2(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_21_comm_eq2(
; CHECK-NEXT:    [[TMP1:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i32 [[TMP1]] to i16
; CHECK-NEXT:    [[TMP3:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[TMP4:%.*]] = trunc i32 [[TMP3]] to i16
; CHECK-NEXT:    [[TMP5:%.*]] = icmp eq i16 [[TMP2]], [[TMP4]]
; CHECK-NEXT:    ret i1 [[TMP5]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %y.1, %x.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = and i1 %c.2, %c.1
  ret i1 %c.210
}

; Test vector variant.

define <2x i1> @eq_21_vector(<2x i32> %x, <2x i32> %y) {
; CHECK-LABEL: @eq_21_vector(
; CHECK-NEXT:    [[TMP1:%.*]] = lshr <2 x i32> [[X:%.*]], <i32 8, i32 8>
; CHECK-NEXT:    [[TMP2:%.*]] = trunc <2 x i32> [[TMP1]] to <2 x i16>
; CHECK-NEXT:    [[TMP3:%.*]] = lshr <2 x i32> [[Y:%.*]], <i32 8, i32 8>
; CHECK-NEXT:    [[TMP4:%.*]] = trunc <2 x i32> [[TMP3]] to <2 x i16>
; CHECK-NEXT:    [[TMP5:%.*]] = icmp eq <2 x i16> [[TMP2]], [[TMP4]]
; CHECK-NEXT:    ret <2 x i1> [[TMP5]]
;
  %x.321 = lshr <2x i32> %x, <i32 8, i32 8>
  %x.1 = trunc <2x i32> %x.321 to <2x i8>
  %x.32 = lshr <2x i32> %x, <i32 16, i32 16>
  %x.2 = trunc <2x i32> %x.32 to <2x i8>
  %y.321 = lshr <2x i32> %y, <i32 8, i32 8>
  %y.1 = trunc <2x i32> %y.321 to <2x i8>
  %y.32 = lshr <2x i32> %y, <i32 16, i32 16>
  %y.2 = trunc <2x i32> %y.32 to <2x i8>
  %c.1 = icmp eq <2x i8> %x.1, %y.1
  %c.2 = icmp eq <2x i8> %x.2, %y.2
  %c.210 = and <2x i1> %c.2, %c.1
  ret <2 x i1> %c.210
}

; Test irregular bit widths. This also tests the case where
; all the involved bit widths and offsets are different.

define i1 @eq_irregular_bit_widths(i31 %x, i31 %y) {
; CHECK-LABEL: @eq_irregular_bit_widths(
; CHECK-NEXT:    [[TMP1:%.*]] = lshr i31 [[X:%.*]], 7
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i31 [[TMP1]] to i11
; CHECK-NEXT:    [[TMP3:%.*]] = lshr i31 [[Y:%.*]], 7
; CHECK-NEXT:    [[TMP4:%.*]] = trunc i31 [[TMP3]] to i11
; CHECK-NEXT:    [[TMP5:%.*]] = icmp eq i11 [[TMP2]], [[TMP4]]
; CHECK-NEXT:    ret i1 [[TMP5]]
;
  %x.321 = lshr i31 %x, 7
  %x.1 = trunc i31 %x.321 to i6
  %x.32 = lshr i31 %x, 13
  %x.2 = trunc i31 %x.32 to i5
  %y.321 = lshr i31 %y, 7
  %y.1 = trunc i31 %y.321 to i6
  %y.32 = lshr i31 %y, 13
  %y.2 = trunc i31 %y.32 to i5
  %c.1 = icmp eq i6 %x.1, %y.1
  %c.2 = icmp eq i5 %x.2, %y.2
  %c.210 = and i1 %c.2, %c.1
  ret i1 %c.210
}

; Test variants with extra uses.

define i1 @eq_21_extra_use_lshr(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_21_extra_use_lshr(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    call void @use.i32(i32 [[X_321]])
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp eq i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp eq i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = and i1 [[C_1]], [[C_2]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  call void @use.i32(i32 %x.321)
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = and i1 %c.1, %c.2
  ret i1 %c.210
}

define i1 @eq_21_extra_use_trunc(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_21_extra_use_trunc(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    call void @use.i8(i8 [[X_1]])
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp eq i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp eq i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = and i1 [[C_1]], [[C_2]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  call void @use.i8(i8 %x.1)
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = and i1 %c.1, %c.2
  ret i1 %c.210
}

define i1 @eq_21_extra_use_eq1(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_21_extra_use_eq1(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp eq i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    call void @use.i1(i1 [[C_1]])
; CHECK-NEXT:    [[C_2:%.*]] = icmp eq i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = and i1 [[C_1]], [[C_2]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  call void @use.i1(i1 %c.1)
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = and i1 %c.1, %c.2
  ret i1 %c.210
}

define i1 @eq_21_extra_use_eq2(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_21_extra_use_eq2(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp eq i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp eq i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    call void @use.i1(i1 [[C_2]])
; CHECK-NEXT:    [[C_210:%.*]] = and i1 [[C_1]], [[C_2]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  call void @use.i1(i1 %c.2)
  %c.210 = and i1 %c.1, %c.2
  ret i1 %c.210
}

; Logical and instead of bitwise and.

define i1 @eq_21_logical(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_21_logical(
; CHECK-NEXT:    [[TMP1:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i32 [[TMP1]] to i16
; CHECK-NEXT:    [[TMP3:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[TMP4:%.*]] = trunc i32 [[TMP3]] to i16
; CHECK-NEXT:    [[TMP5:%.*]] = icmp eq i16 [[TMP2]], [[TMP4]]
; CHECK-NEXT:    ret i1 [[TMP5]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = select i1 %c.2, i1 %c.1, i1 false
  ret i1 %c.210
}

; Negative tests.

define i1 @eq_21_wrong_op1(i32 %x, i32 %y, i32 %z) {
; CHECK-LABEL: @eq_21_wrong_op1(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[Z:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X:%.*]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp eq i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp eq i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = and i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %z, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = and i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @eq_21_wrong_op2(i32 %x, i32 %y, i32 %z) {
; CHECK-LABEL: @eq_21_wrong_op2(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[Z:%.*]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp eq i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp eq i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = and i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %z, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = and i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @eq_21_wrong_op3(i32 %x, i32 %y, i32 %z) {
; CHECK-LABEL: @eq_21_wrong_op3(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Z:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y:%.*]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp eq i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp eq i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = and i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %z, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = and i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @eq_21_wrong_op4(i32 %x, i32 %y, i32 %z) {
; CHECK-LABEL: @eq_21_wrong_op4(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Z:%.*]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp eq i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp eq i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = and i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %z, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = and i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @eq_21_wrong_shift1(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_21_wrong_shift1(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 7
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp eq i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp eq i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = and i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 7
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = and i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @eq_21_wrong_shift2(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_21_wrong_shift2(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 15
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp eq i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp eq i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = and i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 15
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = and i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @eq_21_not_adjacent(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_21_not_adjacent(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 17
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 17
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp eq i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp eq i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = and i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 17
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 17
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = and i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @eq_shift_in_zeros(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_shift_in_zeros(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i24
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i24
; CHECK-NEXT:    [[C_1:%.*]] = icmp eq i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp eq i24 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = and i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i24
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i24
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i24 %x.2, %y.2
  %c.210 = and i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @eq_21_wrong_pred1(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_21_wrong_pred1(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp eq i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp ne i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = and i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = and i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @eq_21_wrong_pred2(i32 %x, i32 %y) {
; CHECK-LABEL: @eq_21_wrong_pred2(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp ne i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp ne i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = and i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = and i1 %c.2, %c.1
  ret i1 %c.210
}

;
; Now the same thing again, but for or ne instead of and eq.
;

define i1 @ne_10(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_10(
; CHECK-NEXT:    [[TMP1:%.*]] = trunc i32 [[X:%.*]] to i16
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i32 [[Y:%.*]] to i16
; CHECK-NEXT:    [[TMP3:%.*]] = icmp ne i16 [[TMP1]], [[TMP2]]
; CHECK-NEXT:    ret i1 [[TMP3]]
;
  %x.0 = trunc i32 %x to i8
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %y.0 = trunc i32 %y to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %c.0 = icmp ne i8 %x.0, %y.0
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.10 = or i1 %c.0, %c.1
  ret i1 %c.10
}

define i1 @ne_210(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_210(
; CHECK-NEXT:    [[TMP1:%.*]] = trunc i32 [[X:%.*]] to i24
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i32 [[Y:%.*]] to i24
; CHECK-NEXT:    [[TMP3:%.*]] = icmp ne i24 [[TMP1]], [[TMP2]]
; CHECK-NEXT:    ret i1 [[TMP3]]
;
  %x.0 = trunc i32 %x to i8
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.0 = trunc i32 %y to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.0 = icmp ne i8 %x.0, %y.0
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.10 = or i1 %c.0, %c.1
  %c.210 = or i1 %c.2, %c.10
  ret i1 %c.210
}

define i1 @ne_3210(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_3210(
; CHECK-NEXT:    [[TMP1:%.*]] = icmp ne i32 [[X:%.*]], [[Y:%.*]]
; CHECK-NEXT:    ret i1 [[TMP1]]
;
  %x.0 = trunc i32 %x to i8
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %x.3.ext = lshr i32 %x, 24
  %x.3 = trunc i32 %x.3.ext to i8
  %y.0 = trunc i32 %y to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %y.3.ext = lshr i32 %y, 24
  %y.3 = trunc i32 %y.3.ext to i8
  %c.0 = icmp ne i8 %x.0, %y.0
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.3 = icmp ne i8 %x.3, %y.3
  %c.10 = or i1 %c.0, %c.1
  %c.210 = or i1 %c.2, %c.10
  %c.3210 = or i1 %c.3, %c.210
  ret i1 %c.3210
}

define i1 @ne_21(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_21(
; CHECK-NEXT:    [[TMP1:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i32 [[TMP1]] to i16
; CHECK-NEXT:    [[TMP3:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[TMP4:%.*]] = trunc i32 [[TMP3]] to i16
; CHECK-NEXT:    [[TMP5:%.*]] = icmp ne i16 [[TMP2]], [[TMP4]]
; CHECK-NEXT:    ret i1 [[TMP5]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = or i1 %c.2, %c.1
  ret i1 %c.210
}

; Test commuted variants of ne_21.

define i1 @ne_21_comm_or(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_21_comm_or(
; CHECK-NEXT:    [[TMP1:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i32 [[TMP1]] to i16
; CHECK-NEXT:    [[TMP3:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[TMP4:%.*]] = trunc i32 [[TMP3]] to i16
; CHECK-NEXT:    [[TMP5:%.*]] = icmp ne i16 [[TMP2]], [[TMP4]]
; CHECK-NEXT:    ret i1 [[TMP5]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = or i1 %c.1, %c.2
  ret i1 %c.210
}

define i1 @ne_21_comm_ne(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_21_comm_ne(
; CHECK-NEXT:    [[TMP1:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i32 [[TMP1]] to i16
; CHECK-NEXT:    [[TMP3:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[TMP4:%.*]] = trunc i32 [[TMP3]] to i16
; CHECK-NEXT:    [[TMP5:%.*]] = icmp ne i16 [[TMP2]], [[TMP4]]
; CHECK-NEXT:    ret i1 [[TMP5]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %y.2, %x.2
  %c.210 = or i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @ne_21_comm_ne2(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_21_comm_ne2(
; CHECK-NEXT:    [[TMP1:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i32 [[TMP1]] to i16
; CHECK-NEXT:    [[TMP3:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[TMP4:%.*]] = trunc i32 [[TMP3]] to i16
; CHECK-NEXT:    [[TMP5:%.*]] = icmp ne i16 [[TMP2]], [[TMP4]]
; CHECK-NEXT:    ret i1 [[TMP5]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %y.1, %x.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = or i1 %c.2, %c.1
  ret i1 %c.210
}

; Test vector variant.

define <2x i1> @ne_21_vector(<2x i32> %x, <2x i32> %y) {
; CHECK-LABEL: @ne_21_vector(
; CHECK-NEXT:    [[TMP1:%.*]] = lshr <2 x i32> [[X:%.*]], <i32 8, i32 8>
; CHECK-NEXT:    [[TMP2:%.*]] = trunc <2 x i32> [[TMP1]] to <2 x i16>
; CHECK-NEXT:    [[TMP3:%.*]] = lshr <2 x i32> [[Y:%.*]], <i32 8, i32 8>
; CHECK-NEXT:    [[TMP4:%.*]] = trunc <2 x i32> [[TMP3]] to <2 x i16>
; CHECK-NEXT:    [[TMP5:%.*]] = icmp ne <2 x i16> [[TMP2]], [[TMP4]]
; CHECK-NEXT:    ret <2 x i1> [[TMP5]]
;
  %x.321 = lshr <2x i32> %x, <i32 8, i32 8>
  %x.1 = trunc <2x i32> %x.321 to <2x i8>
  %x.32 = lshr <2x i32> %x, <i32 16, i32 16>
  %x.2 = trunc <2x i32> %x.32 to <2x i8>
  %y.321 = lshr <2x i32> %y, <i32 8, i32 8>
  %y.1 = trunc <2x i32> %y.321 to <2x i8>
  %y.32 = lshr <2x i32> %y, <i32 16, i32 16>
  %y.2 = trunc <2x i32> %y.32 to <2x i8>
  %c.1 = icmp ne <2x i8> %x.1, %y.1
  %c.2 = icmp ne <2x i8> %x.2, %y.2
  %c.210 = or <2x i1> %c.2, %c.1
  ret <2 x i1> %c.210
}

; Test irregular bit widths. This also tests the case where
; all the involved bit widths or offsets are different.

define i1 @ne_irregular_bit_widths(i31 %x, i31 %y) {
; CHECK-LABEL: @ne_irregular_bit_widths(
; CHECK-NEXT:    [[TMP1:%.*]] = lshr i31 [[X:%.*]], 7
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i31 [[TMP1]] to i11
; CHECK-NEXT:    [[TMP3:%.*]] = lshr i31 [[Y:%.*]], 7
; CHECK-NEXT:    [[TMP4:%.*]] = trunc i31 [[TMP3]] to i11
; CHECK-NEXT:    [[TMP5:%.*]] = icmp ne i11 [[TMP2]], [[TMP4]]
; CHECK-NEXT:    ret i1 [[TMP5]]
;
  %x.321 = lshr i31 %x, 7
  %x.1 = trunc i31 %x.321 to i6
  %x.32 = lshr i31 %x, 13
  %x.2 = trunc i31 %x.32 to i5
  %y.321 = lshr i31 %y, 7
  %y.1 = trunc i31 %y.321 to i6
  %y.32 = lshr i31 %y, 13
  %y.2 = trunc i31 %y.32 to i5
  %c.1 = icmp ne i6 %x.1, %y.1
  %c.2 = icmp ne i5 %x.2, %y.2
  %c.210 = or i1 %c.2, %c.1
  ret i1 %c.210
}

; Test variants with extra uses.

define i1 @ne_21_extra_use_lshr(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_21_extra_use_lshr(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    call void @use.i32(i32 [[X_321]])
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp ne i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp ne i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = or i1 [[C_1]], [[C_2]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  call void @use.i32(i32 %x.321)
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = or i1 %c.1, %c.2
  ret i1 %c.210
}

define i1 @ne_21_extra_use_trunc(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_21_extra_use_trunc(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    call void @use.i8(i8 [[X_1]])
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp ne i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp ne i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = or i1 [[C_1]], [[C_2]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  call void @use.i8(i8 %x.1)
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = or i1 %c.1, %c.2
  ret i1 %c.210
}

define i1 @ne_21_extra_use_ne1(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_21_extra_use_ne1(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp ne i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    call void @use.i1(i1 [[C_1]])
; CHECK-NEXT:    [[C_2:%.*]] = icmp ne i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = or i1 [[C_1]], [[C_2]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  call void @use.i1(i1 %c.1)
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = or i1 %c.1, %c.2
  ret i1 %c.210
}

define i1 @ne_21_extra_use_ne2(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_21_extra_use_ne2(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp ne i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp ne i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    call void @use.i1(i1 [[C_2]])
; CHECK-NEXT:    [[C_210:%.*]] = or i1 [[C_1]], [[C_2]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  call void @use.i1(i1 %c.2)
  %c.210 = or i1 %c.1, %c.2
  ret i1 %c.210
}

; Logical or instead of bitwise or.

define i1 @ne_21_logical(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_21_logical(
; CHECK-NEXT:    [[TMP1:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[TMP2:%.*]] = trunc i32 [[TMP1]] to i16
; CHECK-NEXT:    [[TMP3:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[TMP4:%.*]] = trunc i32 [[TMP3]] to i16
; CHECK-NEXT:    [[TMP5:%.*]] = icmp ne i16 [[TMP2]], [[TMP4]]
; CHECK-NEXT:    ret i1 [[TMP5]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = select i1 %c.2, i1 true, i1 %c.1
  ret i1 %c.210
}

; Negative tests.

define i1 @ne_21_wrong_op1(i32 %x, i32 %y, i32 %z) {
; CHECK-LABEL: @ne_21_wrong_op1(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[Z:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X:%.*]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp ne i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp ne i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = or i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %z, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = or i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @ne_21_wrong_op2(i32 %x, i32 %y, i32 %z) {
; CHECK-LABEL: @ne_21_wrong_op2(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[Z:%.*]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp ne i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp ne i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = or i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %z, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = or i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @ne_21_wrong_op3(i32 %x, i32 %y, i32 %z) {
; CHECK-LABEL: @ne_21_wrong_op3(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Z:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y:%.*]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp ne i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp ne i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = or i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %z, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = or i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @ne_21_wrong_op4(i32 %x, i32 %y, i32 %z) {
; CHECK-LABEL: @ne_21_wrong_op4(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Z:%.*]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp ne i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp ne i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = or i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %z, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = or i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @ne_21_wrong_shift1(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_21_wrong_shift1(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 7
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp ne i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp ne i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = or i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 7
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = or i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @ne_21_wrong_shift2(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_21_wrong_shift2(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 15
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp ne i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp ne i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = or i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 15
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = or i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @ne_21_not_adjacent(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_21_not_adjacent(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 17
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 17
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp ne i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp ne i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = or i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 17
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 17
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i8 %x.2, %y.2
  %c.210 = or i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @ne_shift_in_zeros(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_shift_in_zeros(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i24
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i24
; CHECK-NEXT:    [[C_1:%.*]] = icmp ne i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp ne i24 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = or i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i24
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i24
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp ne i24 %x.2, %y.2
  %c.210 = or i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @ne_21_wrong_pred1(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_21_wrong_pred1(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp ne i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp eq i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = or i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp ne i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = or i1 %c.2, %c.1
  ret i1 %c.210
}

define i1 @ne_21_wrong_pred2(i32 %x, i32 %y) {
; CHECK-LABEL: @ne_21_wrong_pred2(
; CHECK-NEXT:    [[X_321:%.*]] = lshr i32 [[X:%.*]], 8
; CHECK-NEXT:    [[X_1:%.*]] = trunc i32 [[X_321]] to i8
; CHECK-NEXT:    [[X_32:%.*]] = lshr i32 [[X]], 16
; CHECK-NEXT:    [[X_2:%.*]] = trunc i32 [[X_32]] to i8
; CHECK-NEXT:    [[Y_321:%.*]] = lshr i32 [[Y:%.*]], 8
; CHECK-NEXT:    [[Y_1:%.*]] = trunc i32 [[Y_321]] to i8
; CHECK-NEXT:    [[Y_32:%.*]] = lshr i32 [[Y]], 16
; CHECK-NEXT:    [[Y_2:%.*]] = trunc i32 [[Y_32]] to i8
; CHECK-NEXT:    [[C_1:%.*]] = icmp eq i8 [[X_1]], [[Y_1]]
; CHECK-NEXT:    [[C_2:%.*]] = icmp eq i8 [[X_2]], [[Y_2]]
; CHECK-NEXT:    [[C_210:%.*]] = or i1 [[C_2]], [[C_1]]
; CHECK-NEXT:    ret i1 [[C_210]]
;
  %x.321 = lshr i32 %x, 8
  %x.1 = trunc i32 %x.321 to i8
  %x.32 = lshr i32 %x, 16
  %x.2 = trunc i32 %x.32 to i8
  %y.321 = lshr i32 %y, 8
  %y.1 = trunc i32 %y.321 to i8
  %y.32 = lshr i32 %y, 16
  %y.2 = trunc i32 %y.32 to i8
  %c.1 = icmp eq i8 %x.1, %y.1
  %c.2 = icmp eq i8 %x.2, %y.2
  %c.210 = or i1 %c.2, %c.1
  ret i1 %c.210
}