‘spv’ Dialect

This document describes the design of the SPIR-V dialect in MLIR. It lists various design choices we made for modeling different SPIR-V mechanisms, and their rationale.

This document also explains in a high-level manner how different components are organized and implemented in the code and gives steps to follow for extending them.

This document assumes familiarity with SPIR-V. SPIR-V is the Khronos Group’s binary intermediate language for representing graphics shaders and compute kernels. It is adopted by multiple Khronos Group’s APIs, including Vulkan and OpenCL. It is fully defined in a human-readable specification; the syntax of various SPIR-V instructions are encoded in a machine-readable grammar.

Design Guidelines

SPIR-V is a binary intermediate language that serves dual purpose: on one side, it is an intermediate language to represent graphics shaders and compute kernels for high-level languages to target; on the other side, it defines a stable binary format for hardware driver consumption. As a result, SPIR-V has design principles pertain to not only intermediate language, but also binary format. For example, regularity is one of the design goals of SPIR-V. All concepts are represented as SPIR-V instructions, including declaring extensions and capabilities, defining types and constants, defining functions, attaching additional properties to computation results, etc. This way favors binary encoding and decoding for driver consumption but not necessarily compiler transformations.

Dialect design principles

The main objective of the SPIR-V dialect is to be a proper intermediate representation (IR) to facilitate compiler transformations. While we still aim to support serializing to and deserializing from the binary format for various good reasons, the binary format and its concerns play less a role in the design of the SPIR-V dialect: when there is a trade-off to be made between favoring IR and supporting binary format, we lean towards the former.

On the IR aspect, the SPIR-V dialect aims to model SPIR-V at the same semantic level. It is not intended to be a higher level or lower level abstraction than the SPIR-V specification. Those abstractions are easily outside the domain of SPIR-V and should be modeled with other proper dialects so they can be shared among various compilation paths. Because of the dual purpose of SPIR-V, SPIR-V dialect staying at the same semantic level as the SPIR-V specification also means we can still have straightforward serialization and deserialization for the majority of functionalities.

To summarize, the SPIR-V dialect follows the following design principles:

  • Stay as the same semantic level as the SPIR-V specification by having one-to-one mapping for most concepts and entities.
  • Adopt SPIR-V specification's syntax if possible, but deviate intentionally to utilize MLIR mechanisms if it results in better representation and benefits transformation.
  • Be straightforward to serialize into and deserialize from the SPIR-V binary format.

SPIR-V is designed to be consumed by hardware drivers, so its representation is quite clear, yet verbose for some cases. Allowing representational deviation gives us the flexibility to reduce the verbosity by using MLIR mechanisms.

Dialect scopes

SPIR-V supports multiple execution environments, specified by client APIs. Notable adopters include Vulkan and OpenCL. It follows that the SPIR-V dialect should support multiple execution environments if to be a proper proxy of SPIR-V in MLIR systems. The SPIR-V dialect is designed with these considerations: it has proper support for versions, extensions, and capabilities and is as extensible as SPIR-V specification.


The SPIR-V dialect adopts the following conventions for IR:

  • The prefix for all SPIR-V types and operations are spv..
  • All instructions in an extended instruction set are further qualified with the extended instruction set's prefix. For example, all operations in the GLSL extended instruction set have the prefix of spv.GLSL..
  • Ops that directly mirror instructions in the specification have CamelCase names that are the same as the instruction opnames (without the Op prefix). For example, spv.FMul is a direct mirror of OpFMul in the specification. Such an op will be serialized into and deserialized from one SPIR-V instruction.
  • Ops with snake_case names are those that have different representation from corresponding instructions (or concepts) in the specification. These ops are mostly for defining the SPIR-V structure. For example, spv.module and spv.Constant. They may correspond to one or more instructions during (de)serialization.
  • Ops with mlir.snake_case names are those that have no corresponding instructions (or concepts) in the binary format. They are introduced to satisfy MLIR structural requirements. For example, spv.mlir.merge. They map to no instructions during (de)serialization.

(TODO: consider merging the last two cases and adopting spv.mlir. prefix for them.)


A SPIR-V module is defined via the spv.module op, which has one region that contains one block. Model-level instructions, including function definitions, are all placed inside the block. Functions are defined using the builtin func op.

We choose to model a SPIR-V module with a dedicated spv.module op based on the following considerations:

  • It maps cleanly to a SPIR-V module in the specification.
  • We can enforce SPIR-V specific verification that is suitable to be performed at the module-level.
  • We can attach additional model-level attributes.
  • We can control custom assembly form.

The spv.module op‘s region cannot capture SSA values from outside, neither implicitly nor explicitly. The spv.module op’s region is closed as to what ops can appear inside: apart from the builtin func op, it can only contain ops from the SPIR-V dialect. The spv.module op's verifier enforces this rule. This meaningfully guarantees that a spv.module can be the entry point and boundary for serialization.

Module-level operations

SPIR-V binary format defines the following sections:

  1. Capabilities required by the module.
  2. Extensions required by the module.
  3. Extended instructions sets required by the module.
  4. Addressing and memory model specification.
  5. Entry point specifications.
  6. Execution mode declarations.
  7. Debug instructions.
  8. Annotation/decoration instructions.
  9. Type, constant, global variables.
  10. Function declarations.
  11. Function definitions.

Basically, a SPIR-V binary module contains multiple module-level instructions followed by a list of functions. Those module-level instructions are essential and they can generate result ids referenced by functions, notably, declaring resource variables to interact with the execution environment.

Compared to the binary format, we adjust how these module-level SPIR-V instructions are represented in the SPIR-V dialect:

Use MLIR attributes for metadata

  • Requirements for capabilities, extensions, extended instruction sets, addressing model, and memory model are conveyed using spv.module attributes. This is considered better because these information are for the execution environment. It's easier to probe them if on the module op itself.
  • Annotations/decoration instructions are “folded” into the instructions they decorate and represented as attributes on those ops. This eliminates potential forward references of SSA values, improves IR readability, and makes querying the annotations more direct. More discussions can be found in the Decorations section.

Model types with MLIR custom types

  • Types are represented using MLIR builtin types and SPIR-V dialect specific types. There are no type declaration ops in the SPIR-V dialect. More discussions can be found in the Types section later.

Unify and localize constants

  • Various normal constant instructions are represented by the same spv.Constant op. Those instructions are just for constants of different types; using one op to represent them reduces IR verbosity and makes transformations less tedious.
  • Normal constants are not placed in spv.module's region; they are localized into functions. This is to make functions in the SPIR-V dialect to be isolated and explicit capturing. Constants are cheap to duplicate given attributes are made unique in MLIRContext.

Adopt symbol-based global variables and specialization constant

  • Global variables are defined with the spv.GlobalVariable op. They do not generate SSA values. Instead they have symbols and should be referenced via symbols. To use global variables in a function block, spv.mlir.addressof is needed to turn the symbol into an SSA value.
  • Specialization constants are defined with the spv.SpecConstant op. Similar to global variables, they do not generate SSA values and have symbols for reference, too. spv.mlir.referenceof is needed to turn the symbol into an SSA value for use in a function block.

The above choices enables functions in the SPIR-V dialect to be isolated and explicit capturing.

Disallow implicit capturing in functions

  • In SPIR-V specification, functions support implicit capturing: they can reference SSA values defined in modules. In the SPIR-V dialect functions are defined with func op, which disallows implicit capturing. This is more friendly to compiler analyses and transformations. More discussions can be found in the Function section later.

Model entry points and execution models as normal ops

  • A SPIR-V module can have multiple entry points. And these entry points refer to the function and interface variables. It’s not suitable to model them as spv.module op attributes. We can model them as normal ops of using symbol references.
  • Similarly for execution modes, which are coupled with entry points, we can model them as normal ops in spv.module's region.


Annotations/decorations provide additional information on result ids. In SPIR-V, all instructions can generate result ids, including value-computing and type-defining ones.

For decorations on value result ids, we can just have a corresponding attribute attached to the operation generating the SSA value. For example, for the following SPIR-V:

OpDecorate %v1 RelaxedPrecision
OpDecorate %v2 NoContraction
%v1 = OpFMul %float %0 %0
%v2 = OpFMul %float %1 %1

We can represent them in the SPIR-V dialect as:

%v1 = "spv.FMul"(%0, %0) {RelaxedPrecision: unit} : (f32, f32) -> (f32)
%v2 = "spv.FMul"(%1, %1) {NoContraction: unit} : (f32, f32) -> (f32)

This approach benefits transformations. Essentially those decorations are just additional properties of the result ids (and thus their defining instructions). In SPIR-V binary format, they are just represented as instructions. Literally following SPIR-V binary format means we need to through def-use chains to find the decoration instructions and query information from them.

For decorations on type result ids, notice that practically, only result ids generated from composite types (e.g., OpTypeArray, OpTypeStruct) need to be decorated for memory layouting purpose (e.g., ArrayStride, Offset, etc.); scalar/vector types are required to be uniqued in SPIR-V. Therefore, we can just encode them directly in the dialect-specific type.


Theoretically we can define all SPIR-V types using MLIR extensible type system, but other than representational purity, it does not buy us more. Instead, we need to maintain the code and invest in pretty printing them. So we prefer to use builtin types if possible.

The SPIR-V dialect reuses builtin integer, float, and vector types:

OpTypeFloat <bitwidth>f<bitwidth>
OpTypeVector <scalar-type> <count>vector<<count> x <scalar-type>>

For integer types, the SPIR-V dialect supports all signedness semantics (signless, signed, unsigned) in order to ease transformations from higher level dialects. However, SPIR-V spec only defines two signedness semantics state: 0 indicates unsigned, or no signedness semantics, 1 indicates signed semantics. So both iN and uiN are serialized into the same OpTypeInt N 0. For deserialization, we always treat OpTypeInt N 0 as iN.

mlir::NoneType is used for SPIR-V OpTypeVoid; builtin function types are used for SPIR-V OpTypeFunction types.

The SPIR-V dialect and defines the following dialect-specific types:

spirv-type ::= array-type
             | image-type
             | pointer-type
             | runtime-array-type
             | sampled-image-type
             | struct-type

Array type

This corresponds to SPIR-V array type. Its syntax is

element-type ::= integer-type
               | floating-point-type
               | vector-type
               | spirv-type

array-type ::= `!spv.array` `<` integer-literal `x` element-type
               (`,` `stride` `=` integer-literal)? `>`

For example,

!spv.array<4 x i32>
!spv.array<4 x i32, stride = 4>
!spv.array<16 x vector<4 x f32>>

Image type

This corresponds to SPIR-V image type. Its syntax is

dim ::= `1D` | `2D` | `3D` | `Cube` | <and other SPIR-V Dim specifiers...>

depth-info ::= `NoDepth` | `IsDepth` | `DepthUnknown`

arrayed-info ::= `NonArrayed` | `Arrayed`

sampling-info ::= `SingleSampled` | `MultiSampled`

sampler-use-info ::= `SamplerUnknown` | `NeedSampler` | `NoSampler`

format ::= `Unknown` | `Rgba32f` | <and other SPIR-V Image Formats...>

image-type ::= `!spv.image<` element-type `,` dim `,` depth-info `,`
                           arrayed-info `,` sampling-info `,`
                           sampler-use-info `,` format `>`

For example,

!spv.image<f32, 1D, NoDepth, NonArrayed, SingleSampled, SamplerUnknown, Unknown>
!spv.image<f32, Cube, IsDepth, Arrayed, MultiSampled, NeedSampler, Rgba32f>

Pointer type

This corresponds to SPIR-V pointer type. Its syntax is

storage-class ::= `UniformConstant`
                | `Uniform`
                | `Workgroup`
                | <and other storage classes...>

pointer-type ::= `!spv.ptr<` element-type `,` storage-class `>`

For example,

!spv.ptr<i32, Function>
!spv.ptr<vector<4 x f32>, Uniform>

Runtime array type

This corresponds to SPIR-V runtime array type. Its syntax is

runtime-array-type ::= `!spv.rtarray` `<` element-type (`,` `stride` `=` integer-literal)? `>`

For example,

!spv.rtarray<i32, stride=4>
!spv.rtarray<vector<4 x f32>>

Sampled image type

This corresponds to SPIR-V sampled image type. Its syntax is

sampled-image-type ::= `!spv.sampled_image<!spv.image<` element-type `,` dim `,` depth-info `,`
                                                        arrayed-info `,` sampling-info `,`
                                                        sampler-use-info `,` format `>>`

For example,

!spv.sampled_image<!spv.image<f32, Dim1D, NoDepth, NonArrayed, SingleSampled, NoSampler, Unknown>>
!spv.sampled_image<!spv.image<i32, Rect, DepthUnknown, Arrayed, MultiSampled, NeedSampler, R8ui>>

Struct type

This corresponds to SPIR-V struct type. Its syntax is

struct-member-decoration ::= integer-literal? spirv-decoration*
struct-type ::= `!spv.struct<` spirv-type (`[` struct-member-decoration `]`)?
                     (`, ` spirv-type (`[` struct-member-decoration `]`)?

For Example,

!spv.struct<f32 [0]>
!spv.struct<f32, !spv.image<f32, 1D, NoDepth, NonArrayed, SingleSampled, SamplerUnknown, Unknown>>
!spv.struct<f32 [0], i32 [4]>


In SPIR-V, a function construct consists of multiple instructions involving OpFunction, OpFunctionParameter, OpLabel, OpFunctionEnd.

// int f(int v) { return v; }
%1 = OpTypeInt 32 0
%2 = OpTypeFunction %1 %1
%3 = OpFunction %1 %2
%4 = OpFunctionParameter %1
%5 = OpLabel
%6 = OpReturnValue %4

This construct is very clear yet quite verbose. It is intended for driver consumption. There is little benefit to literally replicate this construct in the SPIR-V dialect. Instead, we reuse the builtin func op to express functions more concisely:

func @f(%arg: i32) -> i32 {
  "spv.ReturnValue"(%arg) : (i32) -> (i32)

A SPIR-V function can have at most one result. It cannot contain nested functions or non-SPIR-V operations. spv.module verifies these requirements.

A major difference between the SPIR-V dialect and the SPIR-V specification for functions is that the former are isolated and require explicit capturing, while the latter allows implicit capturing. In SPIR-V specification, functions can refer to SSA values (generated by constants, global variables, etc.) defined in modules. The SPIR-V dialect adjusted how constants and global variables are modeled to enable isolated functions. Isolated functions are more friendly to compiler analyses and transformations. This also enables the SPIR-V dialect to better utilize core infrastructure: many functionalities in the core infrastructure require ops to be isolated, e.g., the greedy pattern rewriter can only act on ops isolated from above.

(TODO: create a dedicated spv.fn op for SPIR-V functions.)


In SPIR-V, instruction is a generalized concept; a SPIR-V module is just a sequence of instructions. Declaring types, expressing computations, annotating result ids, expressing control flows and others are all in the form of instructions.

We only discuss instructions expressing computations here, which can be represented via SPIR-V dialect ops. Module-level instructions for declarations and definitions are represented differently in the SPIR-V dialect as explained earlier in the Module-level operations section.

An instruction computes zero or one result from zero or more operands. The result is a new result id. An operand can be a result id generated by a previous instruction, an immediate value, or a case of an enum type. We can model result id operands and results with MLIR SSA values; for immediate value and enum cases, we can model them with MLIR attributes.

For example,

%i32 = OpTypeInt 32 0
%c42 = OpConstant %i32 42
%3 = OpVariable %i32 Function 42
%4 = OpIAdd %i32 %c42 %c42

can be represented in the dialect as

%0 = "spv.Constant"() { value = 42 : i32 } : () -> i32
%1 = "spv.Variable"(%0) { storage_class = "Function" } : (i32) -> !spv.ptr<i32, Function>
%2 = "spv.IAdd"(%0, %0) : (i32, i32) -> i32

Operation documentation is written in each op's Op Definition Spec using TableGen. A markdown version of the doc can be generated using mlir-tblgen -gen-doc and is attached in the Operation definitions section.

Ops from extended instruction sets

Analogically extended instruction set is a mechanism to import SPIR-V instructions within another namespace. GLSL.std.450 is an extended instruction set that provides common mathematical routines that should be supported. Instead of modeling OpExtInstImport as a separate op and use a single op to model OpExtInst for all extended instructions, we model each SPIR-V instruction in an extended instruction set as a separate op with the proper name prefix. For example, for

%glsl = OpExtInstImport "GLSL.std.450"

%f32 = OpTypeFloat 32
%cst = OpConstant %f32 ...

%1 = OpExtInst %f32 %glsl 28 %cst
%2 = OpExtInst %f32 %glsl 31 %cst

we can have

%1 = "spv.GLSL.Log"(%cst) : (f32) -> (f32)
%2 = "spv.GLSL.Sqrt"(%cst) : (f32) -> (f32)

Control Flow

SPIR-V binary format uses merge instructions (OpSelectionMerge and OpLoopMerge) to declare structured control flow. They explicitly declare a header block before the control flow diverges and a merge block where control flow subsequently converges. These blocks delimit constructs that must nest, and can only be entered and exited in structured ways.

In the SPIR-V dialect, we use regions to mark the boundary of a structured control flow construct. With this approach, it's easier to discover all blocks belonging to a structured control flow construct. It is also more idiomatic to MLIR system.

We introduce a spv.mlir.selection and spv.mlir.loop op for structured selections and loops, respectively. The merge targets are the next ops following them. Inside their regions, a special terminator, spv.mlir.merge is introduced for branching to the merge target.


spv.mlir.selection defines a selection construct. It contains one region. The region should contain at least two blocks: one selection header block and one merge block.

  • The selection header block should be the first block. It should contain the spv.BranchConditional or spv.Switch op.
  • The merge block should be the last block. The merge block should only contain a spv.mlir.merge op. Any block can branch to the merge block for early exit.
               | header block |                 (may have multiple outgoing branches)
                    / | \

   +---------+   +---------+   +---------+
   | case #0 |   | case #1 |   | case #2 |  ... (may have branches between each other)
   +---------+   +---------+   +---------+

                    \ | /
               | merge block |                  (may have multiple incoming branches)

For example, for the given function

void loop(bool cond) {
  int x = 0;
  if (cond) {
    x = 1;
  } else {
    x = 2;
  // ...

It will be represented as

func @selection(%cond: i1) -> () {
  %zero = spv.Constant 0: i32
  %one = spv.Constant 1: i32
  %two = spv.Constant 2: i32
  %x = spv.Variable init(%zero) : !spv.ptr<i32, Function>

  spv.mlir.selection {
    spv.BranchConditional %cond, ^then, ^else

    spv.Store "Function" %x, %one : i32
    spv.Branch ^merge

    spv.Store "Function" %x, %two : i32
    spv.Branch ^merge


  // ...


spv.mlir.loop defines a loop construct. It contains one region. The region should contain at least four blocks: one entry block, one loop header block, one loop continue block, one merge block.

  • The entry block should be the first block and it should jump to the loop header block, which is the second block.
  • The merge block should be the last block. The merge block should only contain a spv.mlir.merge op. Any block except the entry block can branch to the merge block for early exit.
  • The continue block should be the second to last block and it should have a branch to the loop header block.
  • The loop continue block should be the only block, except the entry block, branching to the loop header block.
    | entry block |           (one outgoing branch)
    +-------------+           (two incoming branches)
    | loop header | <-----+   (may have one or two outgoing branches)
    +-------------+       |
          ...             |
         \ | /            |
           v              |
   +---------------+      |   (may have multiple incoming branches)
   | loop continue | -----+   (may have one or two outgoing branches)

         \ | /
    +-------------+           (may have multiple incoming branches)
    | merge block |

The reason to have another entry block instead of directly using the loop header block as the entry block is to satisfy region‘s requirement: entry block of region may not have predecessors. We have a merge block so that branch ops can reference it as successors. The loop continue block here corresponds to “continue construct” using SPIR-V spec’s term; it does not mean the “continue block” as defined in the SPIR-V spec, which is “a block containing a branch to an OpLoopMerge instruction’s Continue Target.”

For example, for the given function

void loop(int count) {
  for (int i = 0; i < count; ++i) {
    // ...

It will be represented as

func @loop(%count : i32) -> () {
  %zero = spv.Constant 0: i32
  %one = spv.Constant 1: i32
  %var = spv.Variable init(%zero) : !spv.ptr<i32, Function>

  spv.mlir.loop {
    spv.Branch ^header

    %val0 = spv.Load "Function" %var : i32
    %cmp = spv.SLessThan %val0, %count : i32
    spv.BranchConditional %cmp, ^body, ^merge

    // ...
    spv.Branch ^continue

    %val1 = spv.Load "Function" %var : i32
    %add = spv.IAdd %val1, %one : i32
    spv.Store "Function" %var, %add : i32
    spv.Branch ^header


Block argument for Phi

There are no direct Phi operations in the SPIR-V dialect; SPIR-V OpPhi instructions are modelled as block arguments in the SPIR-V dialect. (See the Rationale doc for “Block Arguments vs Phi nodes”.) Each block argument corresponds to one OpPhi instruction in the SPIR-V binary format. For example, for the following SPIR-V function foo:

  %foo = OpFunction %void None ...
%entry = OpLabel
  %var = OpVariable %_ptr_Function_int Function
         OpSelectionMerge %merge None
         OpBranchConditional %true %true %false
 %true = OpLabel
         OpBranch %phi
%false = OpLabel
         OpBranch %phi
  %phi = OpLabel
  %val = OpPhi %int %int_1 %false %int_0 %true
         OpStore %var %val
%merge = OpLabel

It will be represented as:

func @foo() -> () {
  %var = spv.Variable : !spv.ptr<i32, Function>

  spv.mlir.selection {
    %true = spv.Constant true
    spv.BranchConditional %true, ^true, ^false

    %zero = spv.Constant 0 : i32
    spv.Branch ^phi(%zero: i32)

    %one = spv.Constant 1 : i32
    spv.Branch ^phi(%one: i32)

  ^phi(%arg: i32):
    spv.Store "Function" %var, %arg : i32


Version, extensions, capabilities

SPIR-V supports versions, extensions, and capabilities as ways to indicate the availability of various features (types, ops, enum cases) on target hardware. For example, non-uniform group operations were missing before v1.3, and they require special capabilities like GroupNonUniformArithmetic to be used. These availability information relates to target environment and affects the legality of patterns during dialect conversion.

SPIR-V ops' availability requirements are modeled with op interfaces:

  • QueryMinVersionInterface and QueryMaxVersionInterface for version requirements
  • QueryExtensionInterface for extension requirements
  • QueryCapabilityInterface for capability requirements

These interface declarations are auto-generated from TableGen definitions included in SPIRVBase.td. At the moment all SPIR-V ops implement the above interfaces.

SPIR-V ops' availability implementation methods are automatically synthesized from the availability specification on each op and enum attribute in TableGen. An op needs to look into not only the opcode but also operands to derive its availability requirements. For example, spv.ControlBarrier requires no special capability if the execution scope is Subgroup, but it will require the VulkanMemoryModel capability if the scope is QueueFamily.

SPIR-V types' availability implementation methods are manually written as overrides in the SPIR-V type hierarchy.

These availability requirements serve as the “ingredients” for the SPIRVConversionTarget and SPIRVTypeConverter to perform op and type conversions, by following the requirements in target environment.

Target environment

SPIR-V aims to support multiple execution environments as specified by client APIs. These execution environments affect the availability of certain SPIR-V features. For example, a Vulkan 1.1 implementation must support the 1.0, 1.1, 1.2, and 1.3 versions of SPIR-V and the 1.0 version of the SPIR-V extended instructions for GLSL. Further Vulkan extensions may enable more SPIR-V instructions.

SPIR-V compilation should also take into consideration of the execution environment, so we generate SPIR-V modules valid for the target environment. This is conveyed by the spv.target_env (spirv::TargetEnvAttr) attribute. It should be of #spv.target_env attribute kind, which is defined as:

spirv-version    ::= `v1.0` | `v1.1` | ...
spirv-extension  ::= `SPV_KHR_16bit_storage` | `SPV_EXT_physical_storage_buffer` | ...
spirv-capability ::= `Shader` | `Kernel` | `GroupNonUniform` | ...

spirv-extension-list     ::= `[` (spirv-extension-elements)? `]`
spirv-extension-elements ::= spirv-extension (`,` spirv-extension)*

spirv-capability-list     ::= `[` (spirv-capability-elements)? `]`
spirv-capability-elements ::= spirv-capability (`,` spirv-capability)*

spirv-resource-limits ::= dictionary-attribute

spirv-vce-attribute ::= `#` `spv.vce` `<`
                            spirv-version `,`
                            spirv-capability-list `,`
                            spirv-extensions-list `>`

spirv-vendor-id ::= `AMD` | `NVIDIA` | ...
spirv-device-type ::= `DiscreteGPU` | `IntegratedGPU` | `CPU` | ...
spirv-device-id ::= integer-literal
spirv-device-info ::= spirv-vendor-id (`:` spirv-device-type (`:` spirv-device-id)?)?

spirv-target-env-attribute ::= `#` `spv.target_env` `<`
                                  (spirv-device-info `,`)?
                                  spirv-resource-limits `>`

The attribute has a few fields:

  • A #spv.vce (spirv::VerCapExtAttr) attribute:
    • The target SPIR-V version.
    • A list of SPIR-V extensions for the target.
    • A list of SPIR-V capabilities for the target.
  • A dictionary of target resource limits (see the Vulkan spec for explanation):
    • max_compute_workgroup_invocations
    • max_compute_workgroup_size

For example,

module attributes {
spv.target_env = #spv.target_env<
    #spv.vce<v1.3, [Shader, GroupNonUniform], [SPV_KHR_8bit_storage]>,
      max_compute_workgroup_invocations = 128 : i32,
      max_compute_workgroup_size = dense<[128, 128, 64]> : vector<3xi32>
} { ... }

Dialect conversion framework will utilize the information in spv.target_env to properly filter out patterns and ops not available in the target execution environment. When targeting SPIR-V, one needs to create a SPIRVConversionTarget by providing such an attribute.

Shader interface (ABI)

SPIR-V itself is just expressing computation happening on GPU device. SPIR-V programs themselves are not enough for running workloads on GPU; a companion host application is needed to manage the resources referenced by SPIR-V programs and dispatch the workload. For the Vulkan execution environment, the host application will be written using Vulkan API. Unlike CUDA, the SPIR-V program and the Vulkan application are typically authored with different front-end languages, which isolates these two worlds. Yet they still need to match interfaces: the variables declared in a SPIR-V program for referencing resources need to match with the actual resources managed by the application regarding their parameters.

Still using Vulkan as an example execution environment, there are two primary resource types in Vulkan: buffers and images. They are used to back various uses that may differ regarding the classes of operations (load, store, atomic) to be performed. These uses are differentiated via descriptor types. (For example, uniform storage buffer descriptors can only support load operations while storage buffer descriptors can support load, store, and atomic operations.) Vulkan uses a binding model for resources. Resources are associated with descriptors and descriptors are further grouped into sets. Each descriptor thus has a set number and a binding number. Descriptors in the application corresponds to variables in the SPIR-V program. Their parameters must match, including but not limited to set and binding numbers.

Apart from buffers and images, there is other data that is set up by Vulkan and referenced inside the SPIR-V program, for example, push constants. They also have parameters that require matching between the two worlds.

The interface requirements are external information to the SPIR-V compilation path in MLIR. Besides, each Vulkan application may want to handle resources differently. To avoid duplication and to share common utilities, a SPIR-V shader interface specification needs to be defined to provide the external requirements to and guide the SPIR-V compilation path.

Shader interface attributes

The SPIR-V dialect defines a few attributes for specifying these interfaces:

  • spv.entry_point_abi is a struct attribute that should be attached to the entry function. It contains:
    • local_size for specifying the local work group size for the dispatch.
  • spv.interface_var_abi is attribute that should be attached to each operand and result of the entry function. It should be of #spv.interface_var_abi attribute kind, which is defined as:
spv-storage-class     ::= `StorageBuffer` | ...
spv-descriptor-set    ::= integer-literal
spv-binding           ::= integer-literal
spv-interface-var-abi ::= `#` `spv.interface_var_abi` `<(` spv-descriptor-set
                          `,` spv-binding `)` (`,` spv-storage-class)? `>`

For example,

#spv.interface_var_abi<(0, 0), StorageBuffer>
#spv.interface_var_abi<(0, 1)>

The attribute has a few fields:

  • Descriptor set number for the corresponding resource variable.
  • Binding number for the corresponding resource variable.
  • Storage class for the corresponding resource variable.

The SPIR-V dialect provides a LowerABIAttributesPass that uses this information to lower the entry point function and its ABI consistent with the Vulkan validation rules. Specifically,

  • Creates spv.GlobalVariables for the arguments, and replaces all uses of the argument with this variable. The SSA value used for replacement is obtained using the spv.mlir.addressof operation.
  • Adds the spv.EntryPoint and spv.ExecutionMode operations into the spv.module for the entry function.

Serialization and deserialization

Although the main objective of the SPIR-V dialect is to act as a proper IR for compiler transformations, being able to serialize to and deserialize from the binary format is still very valuable for many good reasons. Serialization enables the artifacts of SPIR-V compilation to be consumed by an execution environment; deserialization allows us to import SPIR-V binary modules and run transformations on them. So serialization and deserialization are supported from the very beginning of the development of the SPIR-V dialect.

The serialization library provides two entry points, mlir::spirv::serialize() and mlir::spirv::deserialize(), for converting a MLIR SPIR-V module to binary format and back. The Code organization explains more about this.

Given that the focus is transformations, which inevitably means changes to the binary module; so serialization is not designed to be a general tool for investigating the SPIR-V binary module and does not guarantee roundtrip equivalence (at least for now). For the latter, please use the assembler/disassembler in the SPIRV-Tools project.

A few transformations are performed in the process of serialization because of the representational differences between SPIR-V dialect and binary format:

  • Attributes on spv.module are emitted as their corresponding SPIR-V instructions.
  • Types are serialized into OpType* instructions in the SPIR-V binary module section for types, constants, and global variables.
  • spv.Constants are unified and placed in the SPIR-V binary module section for types, constants, and global variables.
  • Attributes on ops, if not part of the op's binary encoding, are emitted as OpDecorate* instructions in the SPIR-V binary module section for decorations.
  • spv.mlir.selections and spv.mlir.loops are emitted as basic blocks with Op*Merge instructions in the header block as required by the binary format.
  • Block arguments are materialized as OpPhi instructions at the beginning of the corresponding blocks.

Similarly, a few transformations are performed during deserialization:

  • Instructions for execution environment requirements (extensions, capabilities, extended instruction sets, etc.) will be placed as attributes on spv.module.
  • OpType* instructions will be converted into proper mlir::Types.
  • OpConstant* instructions are materialized as spv.Constant at each use site.
  • OpVariable instructions will be converted to spv.GlobalVariable ops if in module-level; otherwise they will be converted into spv.Variable ops.
  • Every use of a module-level OpVariable instruction will materialize a spv.mlir.addressof op to turn the symbol of the corresponding spv.GlobalVariable into an SSA value.
  • Every use of a OpSpecConstant instruction will materialize a spv.mlir.referenceof op to turn the symbol of the corresponding spv.SpecConstant into an SSA value.
  • OpPhi instructions are converted to block arguments.
  • Structured control flow are placed inside spv.mlir.selection and spv.mlir.loop.


One of the main features of MLIR is the ability to progressively lower from dialects that capture programmer abstraction into dialects that are closer to a machine representation, like SPIR-V dialect. This progressive lowering through multiple dialects is enabled through the use of the DialectConversion framework in MLIR. To simplify targeting SPIR-V dialect using the Dialect Conversion framework, two utility classes are provided.

(Note : While SPIR-V has some validation rules, additional rules are imposed by Vulkan execution environment. The lowering described below implements both these requirements.)


The mlir::spirv::SPIRVConversionTarget class derives from the mlir::ConversionTarget class and serves as a utility to define a conversion target satisfying a given spv.target_env. It registers proper hooks to check the dynamic legality of SPIR-V ops. Users can further register other legality constraints into the returned SPIRVConversionTarget.

spirv::lookupTargetEnvOrDefault() is a handy utility function to query an spv.target_env attached in the input IR or use the default to construct a SPIRVConversionTarget.


The mlir::SPIRVTypeConverter derives from mlir::TypeConverter and provides type conversion for builtin types to SPIR-V types conforming to the target environment it is constructed with. If the required extension/capability for the resultant type is not available in the given target environment, convertType() will return a null type.

Standard scalar types are converted to their corresponding SPIR-V scalar types.

(TODO: Note that if the bitwidth is not available in the target environment, it will be unconditionally converted to 32-bit. This should be switched to properly emulating non-32-bit scalar types.)

Standard index type need special handling since they are not directly supported in SPIR-V. Currently the index type is converted to i32.

(TODO: Allow for configuring the integer width to use for index types in the SPIR-V dialect)

SPIR-V only supports vectors of 2/3/4 elements; so standard vector types of these lengths can be converted directly.

(TODO: Convert other vectors of lengths to scalars or arrays)

Standard memref types with static shape and stride are converted to spv.ptr<spv.struct<spv.array<...>>>s. The resultant SPIR-V array types have the same element type as the source memref and its number of elements is obtained from the layout specification of the memref. The storage class of the pointer type are derived from the memref's memory space with SPIRVTypeConverter::getStorageClassForMemorySpace().

Utility functions for lowering

Setting layout for shader interface variables

SPIR-V validation rules for shaders require composite objects to be explicitly laid out. If a spv.GlobalVariable is not explicitly laid out, the utility method mlir::spirv::decorateType implements a layout consistent with the Vulkan shader requirements.

Creating builtin variables

In SPIR-V dialect, builtins are represented using spv.GlobalVariables, with spv.mlir.addressof used to get a handle to the builtin as an SSA value. The method mlir::spirv::getBuiltinVariableValue creates a spv.GlobalVariable for the builtin in the current spv.module if it does not exist already, and returns an SSA value generated from an spv.mlir.addressof operation.

Current conversions to SPIR-V

Using the above infrastructure, conversions are implemented from

  • Standard Dialect : Only arithmetic and logical operations conversions are implemented.
  • GPU Dialect : A gpu.module is converted to a spv.module. A gpu.function within this module is lowered as an entry function.

Code organization

We aim to provide multiple libraries with clear dependencies for SPIR-V related functionalities in MLIR so developers can just choose the needed components without pulling in the whole world.

The dialect

The code for the SPIR-V dialect resides in a few places:

The whole SPIR-V dialect is exposed via multiple headers for better organization:

The dialect itself, including all types and ops, is in the MLIRSPIRV library. Serialization functionalities are in the MLIRSPIRVSerialization library.

Op definitions

We use Op Definition Spec to define all SPIR-V ops. They are written in TableGen syntax and placed in various *Ops.td files in the header directory. Those *Ops.td files are organized according to the instruction categories used in the SPIR-V specification, for example, an op belonging to the “Atomics Instructions” section is put in the SPIRVAtomicOps.td file.

SPIRVOps.td serves as the main op definition file that includes all files for specific categories.

SPIRVBase.td defines common classes and utilities used by various op definitions. It contains the TableGen SPIR-V dialect definition, SPIR-V versions, known extensions, various SPIR-V enums, TableGen SPIR-V types, and base op classes, etc.

Many of the contents in SPIRVBase.td, e.g., the opcodes and various enums, and all *Ops.td files can be automatically updated via a Python script, which queries the SPIR-V specification and grammar. This greatly reduces the burden of supporting new ops and keeping updated with the SPIR-V spec. More details on this automated development can be found in the Automated development flow section.

Dialect conversions

The code for conversions from other dialects to the SPIR-V dialect also resides in a few places:

These dialect to dialect conversions have their dedicated libraries, MLIRGPUToSPIRV and MLIRStandardToSPIRV, respectively.

There are also common utilities when targeting SPIR-V from any dialect:

These common utilities are implemented in the MLIRSPIRVConversion and MLIRSPIRVTransforms library, respectively.


Lowering memrefs to !spv.array<..> and !spv.rtarray<..>.

The LLVM dialect lowers memref types to a MemrefDescriptor:

struct MemrefDescriptor {
  void *allocated_ptr; // Pointer to the base allocation.
  void *aligned_ptr;   // Pointer within base allocation which is aligned to
                       // the value set in the memref.
  size_t offset;       // Offset from aligned_ptr from where to get values
                       // corresponding to the memref.
  size_t shape[rank];  // Shape of the memref.
  size_t stride[rank]; // Strides used while accessing elements of the memref.

In SPIR-V dialect, we chose not to use a MemrefDescriptor. Instead a memref is lowered directly to a !spv.ptr<!spv.array<nelts x elem_type>> when the memref is statically shaped, and !spv.ptr<!spv.rtarray<elem_type>> when the memref is dynamically shaped. The rationale behind this choice is described below.

  1. Inputs/output buffers to a SPIR-V kernel are specified using OpVariable inside interface storage classes (e.g., Uniform, StorageBuffer, etc.), while kernel private variables reside in non-interface storage classes (e.g., Function, Workgroup, etc.). By default, Vulkan-flavored SPIR-V requires logical addressing mode: one cannot load/store pointers from/to variables and cannot perform pointer arithmetic. Expressing a struct like MemrefDescriptor in interface storage class requires special addressing mode (PhysicalStorageBuffer) and manipulating such a struct in non-interface storage classes requires special capabilities (VariablePointers). Requiring these two extensions together will significantly limit the Vulkan-capable device we can target; basically ruling out mobile support..

  2. An alternative to having one level of indirection (as is the case with MemrefDescriptors), is to embed the !spv.array or !spv.rtarray directly in the MemrefDescriptor, Having such a descriptor at the ABI boundary implies that the first few bytes of the input/output buffers would need to be reserved for shape/stride information. This adds an unnecessary burden on the host side.

  3. A more performant approach would be to have the data be an OpVariable, with the shape and strides passed using a separate OpVariable. This has further advantages:

    • All the dynamic shape/stride information of the memref can be combined into a single descriptor. Descriptors are limited resources on many Vulkan hardware. So combining them would help make the generated code more portable across devices.
    • If the shape/stride information is small enough, they could be accessed using PushConstants that are faster to access and avoid buffer allocation overheads. These would be unnecessary if all shapes are static. In the dynamic shape cases, a few parameters are typically enough to compute the shape of all memrefs used/referenced within the kernel making the use of PushConstants possible.
    • The shape/stride information (typically) needs to be update less frequently than the data stored in the buffers. They could be part of different descriptor sets.


All kinds of contributions are highly appreciated! :) We have GitHub issues for tracking the dialect and lowering development. You can find todo tasks there. The Code organization section gives an overview of how SPIR-V related functionalities are implemented in MLIR. This section gives more concrete steps on how to contribute.

Automated development flow

One of the goals of SPIR-V dialect development is to leverage both the SPIR-V human-readable specification and machine-readable grammar to auto-generate as much contents as possible. Specifically, the following tasks can be automated (partially or fully):

  • Adding support for a new operation.
  • Adding support for a new SPIR-V enum.
  • Serialization and deserialization of a new operation.

We achieve this using the Python script gen_spirv_dialect.py. It fetches the human-readable specification and machine-readable grammar directly from the Internet and updates various SPIR-V *.td files in place. The script gives us an automated flow for adding support for new ops or enums.

Afterwards, we have SPIR-V specific mlir-tblgen backends for reading the Op Definition Spec and generate various components, including (de)serialization logic for ops. Together with standard mlir-tblgen backends, we auto-generate all op classes, enum classes, etc.

In the following subsections, we list the detailed steps to follow for common tasks.

Add a new op

To add a new op, invoke the define_inst.sh script wrapper in utils/spirv. define_inst.sh requires a few parameters:

./define_inst.sh <filename> <base-class-name> <opname>

For example, to define the op for OpIAdd, invoke

./define_inst.sh SPIRVArithmeticOps.td ArithmeticBinaryOp OpIAdd

where SPIRVArithmeticOps.td is the filename for hosting the new op and ArithmeticBinaryOp is the direct base class the newly defined op will derive from.

Similarly, to define the op for OpAtomicAnd,

./define_inst.sh SPIRVAtomicOps.td AtomicUpdateWithValueOp OpAtomicAnd

Note that the generated SPIR-V op definition is just a best-effort template; it is still expected to be updated to have more accurate traits, arguments, and results.

It is also expected that a custom assembly form is defined for the new op, which will require providing the parser and printer. The EBNF form of the custom assembly should be described in the op's description and the parser and printer should be placed in SPIRVOps.cpp with the following signatures:

static ParseResult parse<spirv-op-symbol>Op(OpAsmParser &parser,
                                            OperationState &state);
static void print(spirv::<spirv-op-symbol>Op op, OpAsmPrinter &printer);

See any existing op as an example.

Verification should be provided for the new op to cover all the rules described in the SPIR-V specification. Choosing the proper ODS types and attribute kinds, which can be found in SPIRVBase.td, can help here. Still sometimes we need to manually write additional verification logic in SPIRVOps.cpp in a function with the following signature:

static LogicalResult verify(spirv::<spirv-op-symbol>Op op);

See any such function in SPIRVOps.cpp as an example.

If no additional verification is needed, one needs to add the following to the op's Op Definition Spec:

let verifier = [{ return success(); }];

To suppress the requirement of the above C++ verification function.

Tests for the op's custom assembly form and verification should be added to the proper file in test/Dialect/SPIRV/.

The generated op will automatically gain the logic for (de)serialization. However, tests still need to be coupled with the change to make sure no surprises. Serialization tests live in test/Dialect/SPIRV/Serialization.

Add a new enum

To add a new enum, invoke the define_enum.sh script wrapper in utils/spirv. define_enum.sh expects the following parameters:

./define_enum.sh <enum-class-name>

For example, to add the definition for SPIR-V storage class in to SPIRVBase.td:

./define_enum.sh StorageClass

Add a new custom type

SPIR-V specific types are defined in SPIRVTypes.h. See examples there and the tutorial for defining new custom types.

Add a new conversion

To add conversion for a type update the mlir::spirv::SPIRVTypeConverter to return the converted type (must be a valid SPIR-V type). See Type Conversion for more details.

To lower an operation into SPIR-V dialect, implement a conversion pattern. If the conversion requires type conversion as well, the pattern must inherit from the mlir::spirv::SPIRVOpLowering class to get access to mlir::spirv::SPIRVTypeConverter. If the operation has a region, signature conversion might be needed as well.

Note: The current validation rules of spv.module require that all operations contained within its region are valid operations in the SPIR-V dialect.

Operation definitions

[include “Dialects/SPIRVOps.md”]