| ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py |
| ; RUN: opt < %s -instcombine -S | FileCheck %s |
| |
| target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64" |
| target triple = "x86_64-apple-darwin10.0.0" |
| |
| ; Bitcasts between vectors and scalars are valid. |
| ; PR4487 |
| define i32 @test1(i64 %a) { |
| ; CHECK-LABEL: @test1( |
| ; CHECK-NEXT: ret i32 0 |
| ; |
| %t1 = bitcast i64 %a to <2 x i32> |
| %t2 = bitcast i64 %a to <2 x i32> |
| %t3 = xor <2 x i32> %t1, %t2 |
| %t4 = extractelement <2 x i32> %t3, i32 0 |
| ret i32 %t4 |
| } |
| |
| ; Perform the bitwise logic in the source type of the operands to eliminate bitcasts. |
| |
| define <2 x i32> @xor_two_vector_bitcasts(<1 x i64> %a, <1 x i64> %b) { |
| ; CHECK-LABEL: @xor_two_vector_bitcasts( |
| ; CHECK-NEXT: [[T31:%.*]] = xor <1 x i64> [[A:%.*]], [[B:%.*]] |
| ; CHECK-NEXT: [[T3:%.*]] = bitcast <1 x i64> [[T31]] to <2 x i32> |
| ; CHECK-NEXT: ret <2 x i32> [[T3]] |
| ; |
| %t1 = bitcast <1 x i64> %a to <2 x i32> |
| %t2 = bitcast <1 x i64> %b to <2 x i32> |
| %t3 = xor <2 x i32> %t1, %t2 |
| ret <2 x i32> %t3 |
| } |
| |
| ; No change. Bitcasts are canonicalized above bitwise logic. |
| |
| define <2 x i32> @xor_bitcast_vec_to_vec(<1 x i64> %a) { |
| ; CHECK-LABEL: @xor_bitcast_vec_to_vec( |
| ; CHECK-NEXT: [[T1:%.*]] = bitcast <1 x i64> [[A:%.*]] to <2 x i32> |
| ; CHECK-NEXT: [[T2:%.*]] = xor <2 x i32> [[T1]], <i32 1, i32 2> |
| ; CHECK-NEXT: ret <2 x i32> [[T2]] |
| ; |
| %t1 = bitcast <1 x i64> %a to <2 x i32> |
| %t2 = xor <2 x i32> <i32 1, i32 2>, %t1 |
| ret <2 x i32> %t2 |
| } |
| |
| ; No change. Bitcasts are canonicalized above bitwise logic. |
| |
| define i64 @and_bitcast_vec_to_int(<2 x i32> %a) { |
| ; CHECK-LABEL: @and_bitcast_vec_to_int( |
| ; CHECK-NEXT: [[T1:%.*]] = bitcast <2 x i32> [[A:%.*]] to i64 |
| ; CHECK-NEXT: [[T2:%.*]] = and i64 [[T1]], 3 |
| ; CHECK-NEXT: ret i64 [[T2]] |
| ; |
| %t1 = bitcast <2 x i32> %a to i64 |
| %t2 = and i64 %t1, 3 |
| ret i64 %t2 |
| } |
| |
| ; No change. Bitcasts are canonicalized above bitwise logic. |
| |
| define <2 x i32> @or_bitcast_int_to_vec(i64 %a) { |
| ; CHECK-LABEL: @or_bitcast_int_to_vec( |
| ; CHECK-NEXT: [[T1:%.*]] = bitcast i64 [[A:%.*]] to <2 x i32> |
| ; CHECK-NEXT: [[T2:%.*]] = or <2 x i32> [[T1]], <i32 1, i32 2> |
| ; CHECK-NEXT: ret <2 x i32> [[T2]] |
| ; |
| %t1 = bitcast i64 %a to <2 x i32> |
| %t2 = or <2 x i32> %t1, <i32 1, i32 2> |
| ret <2 x i32> %t2 |
| } |
| |
| ; PR26702 - https://bugs.llvm.org//show_bug.cgi?id=26702 |
| ; Bitcast is canonicalized above logic, so we can see the not-not pattern. |
| |
| define <2 x i64> @is_negative(<4 x i32> %x) { |
| ; CHECK-LABEL: @is_negative( |
| ; CHECK-NEXT: [[LOBIT:%.*]] = ashr <4 x i32> [[X:%.*]], <i32 31, i32 31, i32 31, i32 31> |
| ; CHECK-NEXT: [[TMP1:%.*]] = bitcast <4 x i32> [[LOBIT]] to <2 x i64> |
| ; CHECK-NEXT: ret <2 x i64> [[TMP1]] |
| ; |
| %lobit = ashr <4 x i32> %x, <i32 31, i32 31, i32 31, i32 31> |
| %not = xor <4 x i32> %lobit, <i32 -1, i32 -1, i32 -1, i32 -1> |
| %bc = bitcast <4 x i32> %not to <2 x i64> |
| %notnot = xor <2 x i64> %bc, <i64 -1, i64 -1> |
| ret <2 x i64> %notnot |
| } |
| |
| ; This variation has an extra bitcast at the end. This means that the 2nd xor |
| ; can be done in <4 x i32> to eliminate a bitcast regardless of canonicalizaion. |
| |
| define <4 x i32> @is_negative_bonus_bitcast(<4 x i32> %x) { |
| ; CHECK-LABEL: @is_negative_bonus_bitcast( |
| ; CHECK-NEXT: [[LOBIT:%.*]] = ashr <4 x i32> [[X:%.*]], <i32 31, i32 31, i32 31, i32 31> |
| ; CHECK-NEXT: ret <4 x i32> [[LOBIT]] |
| ; |
| %lobit = ashr <4 x i32> %x, <i32 31, i32 31, i32 31, i32 31> |
| %not = xor <4 x i32> %lobit, <i32 -1, i32 -1, i32 -1, i32 -1> |
| %bc = bitcast <4 x i32> %not to <2 x i64> |
| %notnot = xor <2 x i64> %bc, <i64 -1, i64 -1> |
| %bc2 = bitcast <2 x i64> %notnot to <4 x i32> |
| ret <4 x i32> %bc2 |
| } |
| |
| ; Bitcasts are canonicalized above bitwise logic. |
| |
| define <2 x i8> @canonicalize_bitcast_logic_with_constant(<4 x i4> %x) { |
| ; CHECK-LABEL: @canonicalize_bitcast_logic_with_constant( |
| ; CHECK-NEXT: [[TMP1:%.*]] = bitcast <4 x i4> [[X:%.*]] to <2 x i8> |
| ; CHECK-NEXT: [[B:%.*]] = and <2 x i8> [[TMP1]], <i8 -128, i8 -128> |
| ; CHECK-NEXT: ret <2 x i8> [[B]] |
| ; |
| %a = and <4 x i4> %x, <i4 0, i4 8, i4 0, i4 8> |
| %b = bitcast <4 x i4> %a to <2 x i8> |
| ret <2 x i8> %b |
| } |
| |
| ; PR27925 - https://llvm.org/bugs/show_bug.cgi?id=27925 |
| |
| define <4 x i32> @bitcasts_and_bitcast(<4 x i32> %a, <8 x i16> %b) { |
| ; CHECK-LABEL: @bitcasts_and_bitcast( |
| ; CHECK-NEXT: [[TMP1:%.*]] = bitcast <8 x i16> [[B:%.*]] to <4 x i32> |
| ; CHECK-NEXT: [[BC3:%.*]] = and <4 x i32> [[TMP1]], [[A:%.*]] |
| ; CHECK-NEXT: ret <4 x i32> [[BC3]] |
| ; |
| %bc1 = bitcast <4 x i32> %a to <2 x i64> |
| %bc2 = bitcast <8 x i16> %b to <2 x i64> |
| %and = and <2 x i64> %bc2, %bc1 |
| %bc3 = bitcast <2 x i64> %and to <4 x i32> |
| ret <4 x i32> %bc3 |
| } |
| |
| ; The destination must have an integer element type. |
| ; FIXME: We can still eliminate one bitcast in this test by doing the logic op |
| ; in the type of the input that has an integer element type. |
| |
| define <4 x float> @bitcasts_and_bitcast_to_fp(<4 x float> %a, <8 x i16> %b) { |
| ; CHECK-LABEL: @bitcasts_and_bitcast_to_fp( |
| ; CHECK-NEXT: [[BC1:%.*]] = bitcast <4 x float> [[A:%.*]] to <2 x i64> |
| ; CHECK-NEXT: [[BC2:%.*]] = bitcast <8 x i16> [[B:%.*]] to <2 x i64> |
| ; CHECK-NEXT: [[AND:%.*]] = and <2 x i64> [[BC2]], [[BC1]] |
| ; CHECK-NEXT: [[BC3:%.*]] = bitcast <2 x i64> [[AND]] to <4 x float> |
| ; CHECK-NEXT: ret <4 x float> [[BC3]] |
| ; |
| %bc1 = bitcast <4 x float> %a to <2 x i64> |
| %bc2 = bitcast <8 x i16> %b to <2 x i64> |
| %and = and <2 x i64> %bc2, %bc1 |
| %bc3 = bitcast <2 x i64> %and to <4 x float> |
| ret <4 x float> %bc3 |
| } |
| |
| ; FIXME: Transform limited from changing vector op to integer op to avoid codegen problems. |
| |
| define i128 @bitcast_or_bitcast(i128 %a, <2 x i64> %b) { |
| ; CHECK-LABEL: @bitcast_or_bitcast( |
| ; CHECK-NEXT: [[BC1:%.*]] = bitcast i128 [[A:%.*]] to <2 x i64> |
| ; CHECK-NEXT: [[OR:%.*]] = or <2 x i64> [[BC1]], [[B:%.*]] |
| ; CHECK-NEXT: [[BC2:%.*]] = bitcast <2 x i64> [[OR]] to i128 |
| ; CHECK-NEXT: ret i128 [[BC2]] |
| ; |
| %bc1 = bitcast i128 %a to <2 x i64> |
| %or = or <2 x i64> %b, %bc1 |
| %bc2 = bitcast <2 x i64> %or to i128 |
| ret i128 %bc2 |
| } |
| |
| ; FIXME: Transform limited from changing integer op to vector op to avoid codegen problems. |
| |
| define <4 x i32> @bitcast_xor_bitcast(<4 x i32> %a, i128 %b) { |
| ; CHECK-LABEL: @bitcast_xor_bitcast( |
| ; CHECK-NEXT: [[BC1:%.*]] = bitcast <4 x i32> [[A:%.*]] to i128 |
| ; CHECK-NEXT: [[XOR:%.*]] = xor i128 [[BC1]], [[B:%.*]] |
| ; CHECK-NEXT: [[BC2:%.*]] = bitcast i128 [[XOR]] to <4 x i32> |
| ; CHECK-NEXT: ret <4 x i32> [[BC2]] |
| ; |
| %bc1 = bitcast <4 x i32> %a to i128 |
| %xor = xor i128 %bc1, %b |
| %bc2 = bitcast i128 %xor to <4 x i32> |
| ret <4 x i32> %bc2 |
| } |
| |
| ; https://llvm.org/bugs/show_bug.cgi?id=6137#c6 |
| |
| define <4 x float> @bitcast_vector_select(<4 x float> %x, <2 x i64> %y, <4 x i1> %cmp) { |
| ; CHECK-LABEL: @bitcast_vector_select( |
| ; CHECK-NEXT: [[TMP1:%.*]] = bitcast <2 x i64> [[Y:%.*]] to <4 x float> |
| ; CHECK-NEXT: [[T7:%.*]] = select <4 x i1> [[CMP:%.*]], <4 x float> [[X:%.*]], <4 x float> [[TMP1]] |
| ; CHECK-NEXT: ret <4 x float> [[T7]] |
| ; |
| %t4 = bitcast <4 x float> %x to <4 x i32> |
| %t5 = bitcast <2 x i64> %y to <4 x i32> |
| %t6 = select <4 x i1> %cmp, <4 x i32> %t4, <4 x i32> %t5 |
| %t7 = bitcast <4 x i32> %t6 to <4 x float> |
| ret <4 x float> %t7 |
| } |
| |
| define float @bitcast_scalar_select_of_scalars(float %x, i32 %y, i1 %cmp) { |
| ; CHECK-LABEL: @bitcast_scalar_select_of_scalars( |
| ; CHECK-NEXT: [[TMP1:%.*]] = bitcast i32 [[Y:%.*]] to float |
| ; CHECK-NEXT: [[T7:%.*]] = select i1 [[CMP:%.*]], float [[X:%.*]], float [[TMP1]] |
| ; CHECK-NEXT: ret float [[T7]] |
| ; |
| %t4 = bitcast float %x to i32 |
| %t6 = select i1 %cmp, i32 %t4, i32 %y |
| %t7 = bitcast i32 %t6 to float |
| ret float %t7 |
| } |
| |
| ; FIXME: We should change the select operand types to scalars, but we need to make |
| ; sure the backend can reverse that transform if needed. |
| |
| define float @bitcast_scalar_select_type_mismatch1(float %x, <4 x i8> %y, i1 %cmp) { |
| ; CHECK-LABEL: @bitcast_scalar_select_type_mismatch1( |
| ; CHECK-NEXT: [[T4:%.*]] = bitcast float [[X:%.*]] to <4 x i8> |
| ; CHECK-NEXT: [[T6:%.*]] = select i1 [[CMP:%.*]], <4 x i8> [[T4]], <4 x i8> [[Y:%.*]] |
| ; CHECK-NEXT: [[T7:%.*]] = bitcast <4 x i8> [[T6]] to float |
| ; CHECK-NEXT: ret float [[T7]] |
| ; |
| %t4 = bitcast float %x to <4 x i8> |
| %t6 = select i1 %cmp, <4 x i8> %t4, <4 x i8> %y |
| %t7 = bitcast <4 x i8> %t6 to float |
| ret float %t7 |
| } |
| |
| ; FIXME: We should change the select operand types to vectors, but we need to make |
| ; sure the backend can reverse that transform if needed. |
| |
| define <4 x i8> @bitcast_scalar_select_type_mismatch2(<4 x i8> %x, float %y, i1 %cmp) { |
| ; CHECK-LABEL: @bitcast_scalar_select_type_mismatch2( |
| ; CHECK-NEXT: [[T4:%.*]] = bitcast <4 x i8> [[X:%.*]] to float |
| ; CHECK-NEXT: [[T6:%.*]] = select i1 [[CMP:%.*]], float [[T4]], float [[Y:%.*]] |
| ; CHECK-NEXT: [[T7:%.*]] = bitcast float [[T6]] to <4 x i8> |
| ; CHECK-NEXT: ret <4 x i8> [[T7]] |
| ; |
| %t4 = bitcast <4 x i8> %x to float |
| %t6 = select i1 %cmp, float %t4, float %y |
| %t7 = bitcast float %t6 to <4 x i8> |
| ret <4 x i8> %t7 |
| } |
| |
| define <4 x float> @bitcast_scalar_select_of_vectors(<4 x float> %x, <2 x i64> %y, i1 %cmp) { |
| ; CHECK-LABEL: @bitcast_scalar_select_of_vectors( |
| ; CHECK-NEXT: [[TMP1:%.*]] = bitcast <2 x i64> [[Y:%.*]] to <4 x float> |
| ; CHECK-NEXT: [[T7:%.*]] = select i1 [[CMP:%.*]], <4 x float> [[X:%.*]], <4 x float> [[TMP1]] |
| ; CHECK-NEXT: ret <4 x float> [[T7]] |
| ; |
| %t4 = bitcast <4 x float> %x to <4 x i32> |
| %t5 = bitcast <2 x i64> %y to <4 x i32> |
| %t6 = select i1 %cmp, <4 x i32> %t4, <4 x i32> %t5 |
| %t7 = bitcast <4 x i32> %t6 to <4 x float> |
| ret <4 x float> %t7 |
| } |
| |
| ; Can't change the type of the vector select if the dest type is scalar. |
| |
| define float @bitcast_vector_select_no_fold1(float %x, <2 x i16> %y, <4 x i1> %cmp) { |
| ; CHECK-LABEL: @bitcast_vector_select_no_fold1( |
| ; CHECK-NEXT: [[T4:%.*]] = bitcast float [[X:%.*]] to <4 x i8> |
| ; CHECK-NEXT: [[T5:%.*]] = bitcast <2 x i16> [[Y:%.*]] to <4 x i8> |
| ; CHECK-NEXT: [[T6:%.*]] = select <4 x i1> [[CMP:%.*]], <4 x i8> [[T4]], <4 x i8> [[T5]] |
| ; CHECK-NEXT: [[T7:%.*]] = bitcast <4 x i8> [[T6]] to float |
| ; CHECK-NEXT: ret float [[T7]] |
| ; |
| %t4 = bitcast float %x to <4 x i8> |
| %t5 = bitcast <2 x i16> %y to <4 x i8> |
| %t6 = select <4 x i1> %cmp, <4 x i8> %t4, <4 x i8> %t5 |
| %t7 = bitcast <4 x i8> %t6 to float |
| ret float %t7 |
| } |
| |
| ; Can't change the type of the vector select if the number of elements in the dest type is not the same. |
| |
| define <2 x float> @bitcast_vector_select_no_fold2(<2 x float> %x, <4 x i16> %y, <8 x i1> %cmp) { |
| ; CHECK-LABEL: @bitcast_vector_select_no_fold2( |
| ; CHECK-NEXT: [[T4:%.*]] = bitcast <2 x float> [[X:%.*]] to <8 x i8> |
| ; CHECK-NEXT: [[T5:%.*]] = bitcast <4 x i16> [[Y:%.*]] to <8 x i8> |
| ; CHECK-NEXT: [[T6:%.*]] = select <8 x i1> [[CMP:%.*]], <8 x i8> [[T4]], <8 x i8> [[T5]] |
| ; CHECK-NEXT: [[T7:%.*]] = bitcast <8 x i8> [[T6]] to <2 x float> |
| ; CHECK-NEXT: ret <2 x float> [[T7]] |
| ; |
| %t4 = bitcast <2 x float> %x to <8 x i8> |
| %t5 = bitcast <4 x i16> %y to <8 x i8> |
| %t6 = select <8 x i1> %cmp, <8 x i8> %t4, <8 x i8> %t5 |
| %t7 = bitcast <8 x i8> %t6 to <2 x float> |
| ret <2 x float> %t7 |
| } |
| |
| ; Optimize bitcasts that are extracting low element of vector. This happens because of SRoA. |
| ; rdar://7892780 |
| define float @test2(<2 x float> %A, <2 x i32> %B) { |
| ; CHECK-LABEL: @test2( |
| ; CHECK-NEXT: [[TMP24:%.*]] = extractelement <2 x float> [[A:%.*]], i32 0 |
| ; CHECK-NEXT: [[BC:%.*]] = bitcast <2 x i32> [[B:%.*]] to <2 x float> |
| ; CHECK-NEXT: [[TMP4:%.*]] = extractelement <2 x float> [[BC]], i32 0 |
| ; CHECK-NEXT: [[ADD:%.*]] = fadd float [[TMP24]], [[TMP4]] |
| ; CHECK-NEXT: ret float [[ADD]] |
| ; |
| %tmp28 = bitcast <2 x float> %A to i64 ; <i64> [#uses=2] |
| %tmp23 = trunc i64 %tmp28 to i32 ; <i32> [#uses=1] |
| %tmp24 = bitcast i32 %tmp23 to float ; <float> [#uses=1] |
| |
| %tmp = bitcast <2 x i32> %B to i64 |
| %tmp2 = trunc i64 %tmp to i32 ; <i32> [#uses=1] |
| %tmp4 = bitcast i32 %tmp2 to float ; <float> [#uses=1] |
| |
| %add = fadd float %tmp24, %tmp4 |
| ret float %add |
| } |
| |
| ; Optimize bitcasts that are extracting other elements of a vector. This happens because of SRoA. |
| ; rdar://7892780 |
| define float @test3(<2 x float> %A, <2 x i64> %B) { |
| ; CHECK-LABEL: @test3( |
| ; CHECK-NEXT: [[TMP24:%.*]] = extractelement <2 x float> [[A:%.*]], i32 1 |
| ; CHECK-NEXT: [[BC2:%.*]] = bitcast <2 x i64> [[B:%.*]] to <4 x float> |
| ; CHECK-NEXT: [[TMP4:%.*]] = extractelement <4 x float> [[BC2]], i32 2 |
| ; CHECK-NEXT: [[ADD:%.*]] = fadd float [[TMP24]], [[TMP4]] |
| ; CHECK-NEXT: ret float [[ADD]] |
| ; |
| %tmp28 = bitcast <2 x float> %A to i64 |
| %tmp29 = lshr i64 %tmp28, 32 |
| %tmp23 = trunc i64 %tmp29 to i32 |
| %tmp24 = bitcast i32 %tmp23 to float |
| |
| %tmp = bitcast <2 x i64> %B to i128 |
| %tmp1 = lshr i128 %tmp, 64 |
| %tmp2 = trunc i128 %tmp1 to i32 |
| %tmp4 = bitcast i32 %tmp2 to float |
| |
| %add = fadd float %tmp24, %tmp4 |
| ret float %add |
| } |
| |
| ; Both bitcasts are unnecessary; change the extractelement. |
| |
| define float @bitcast_extelt1(<2 x float> %A) { |
| ; CHECK-LABEL: @bitcast_extelt1( |
| ; CHECK-NEXT: [[BC2:%.*]] = extractelement <2 x float> [[A:%.*]], i32 0 |
| ; CHECK-NEXT: ret float [[BC2]] |
| ; |
| %bc1 = bitcast <2 x float> %A to <2 x i32> |
| %ext = extractelement <2 x i32> %bc1, i32 0 |
| %bc2 = bitcast i32 %ext to float |
| ret float %bc2 |
| } |
| |
| ; Second bitcast can be folded into the first. |
| |
| define i64 @bitcast_extelt2(<4 x float> %A) { |
| ; CHECK-LABEL: @bitcast_extelt2( |
| ; CHECK-NEXT: [[BC:%.*]] = bitcast <4 x float> [[A:%.*]] to <2 x i64> |
| ; CHECK-NEXT: [[BC2:%.*]] = extractelement <2 x i64> [[BC]], i32 1 |
| ; CHECK-NEXT: ret i64 [[BC2]] |
| ; |
| %bc1 = bitcast <4 x float> %A to <2 x double> |
| %ext = extractelement <2 x double> %bc1, i32 1 |
| %bc2 = bitcast double %ext to i64 |
| ret i64 %bc2 |
| } |
| |
| ; TODO: This should return %A. |
| |
| define <2 x i32> @bitcast_extelt3(<2 x i32> %A) { |
| ; CHECK-LABEL: @bitcast_extelt3( |
| ; CHECK-NEXT: [[BC1:%.*]] = bitcast <2 x i32> [[A:%.*]] to <1 x i64> |
| ; CHECK-NEXT: [[EXT:%.*]] = extractelement <1 x i64> [[BC1]], i32 0 |
| ; CHECK-NEXT: [[BC2:%.*]] = bitcast i64 [[EXT]] to <2 x i32> |
| ; CHECK-NEXT: ret <2 x i32> [[BC2]] |
| ; |
| %bc1 = bitcast <2 x i32> %A to <1 x i64> |
| %ext = extractelement <1 x i64> %bc1, i32 0 |
| %bc2 = bitcast i64 %ext to <2 x i32> |
| ret <2 x i32> %bc2 |
| } |
| |
| ; Handle the case where the input is not a vector. |
| |
| define double @bitcast_extelt4(i128 %A) { |
| ; CHECK-LABEL: @bitcast_extelt4( |
| ; CHECK-NEXT: [[BC:%.*]] = bitcast i128 [[A:%.*]] to <2 x double> |
| ; CHECK-NEXT: [[BC2:%.*]] = extractelement <2 x double> [[BC]], i32 0 |
| ; CHECK-NEXT: ret double [[BC2]] |
| ; |
| %bc1 = bitcast i128 %A to <2 x i64> |
| %ext = extractelement <2 x i64> %bc1, i32 0 |
| %bc2 = bitcast i64 %ext to double |
| ret double %bc2 |
| } |
| |
| define <2 x i32> @test4(i32 %A, i32 %B){ |
| ; CHECK-LABEL: @test4( |
| ; CHECK-NEXT: [[TMP1:%.*]] = insertelement <2 x i32> poison, i32 [[A:%.*]], i32 0 |
| ; CHECK-NEXT: [[TMP2:%.*]] = insertelement <2 x i32> [[TMP1]], i32 [[B:%.*]], i32 1 |
| ; CHECK-NEXT: ret <2 x i32> [[TMP2]] |
| ; |
| %tmp38 = zext i32 %A to i64 |
| %tmp32 = zext i32 %B to i64 |
| %tmp33 = shl i64 %tmp32, 32 |
| %ins35 = or i64 %tmp33, %tmp38 |
| %tmp43 = bitcast i64 %ins35 to <2 x i32> |
| ret <2 x i32> %tmp43 |
| } |
| |
| ; rdar://8360454 |
| define <2 x float> @test5(float %A, float %B) { |
| ; CHECK-LABEL: @test5( |
| ; CHECK-NEXT: [[TMP1:%.*]] = insertelement <2 x float> poison, float [[A:%.*]], i32 0 |
| ; CHECK-NEXT: [[TMP2:%.*]] = insertelement <2 x float> [[TMP1]], float [[B:%.*]], i32 1 |
| ; CHECK-NEXT: ret <2 x float> [[TMP2]] |
| ; |
| %tmp37 = bitcast float %A to i32 |
| %tmp38 = zext i32 %tmp37 to i64 |
| %tmp31 = bitcast float %B to i32 |
| %tmp32 = zext i32 %tmp31 to i64 |
| %tmp33 = shl i64 %tmp32, 32 |
| %ins35 = or i64 %tmp33, %tmp38 |
| %tmp43 = bitcast i64 %ins35 to <2 x float> |
| ret <2 x float> %tmp43 |
| } |
| |
| define <2 x float> @test6(float %A){ |
| ; CHECK-LABEL: @test6( |
| ; CHECK-NEXT: [[TMP1:%.*]] = insertelement <2 x float> <float 4.200000e+01, float poison>, float [[A:%.*]], i32 1 |
| ; CHECK-NEXT: ret <2 x float> [[TMP1]] |
| ; |
| %tmp23 = bitcast float %A to i32 |
| %tmp24 = zext i32 %tmp23 to i64 |
| %tmp25 = shl i64 %tmp24, 32 |
| %mask20 = or i64 %tmp25, 1109917696 |
| %tmp35 = bitcast i64 %mask20 to <2 x float> |
| ret <2 x float> %tmp35 |
| } |
| |
| define i64 @ISPC0(i64 %in) { |
| ; CHECK-LABEL: @ISPC0( |
| ; CHECK-NEXT: ret i64 0 |
| ; |
| %out = and i64 %in, xor (i64 bitcast (<4 x i16> <i16 -1, i16 -1, i16 -1, i16 -1> to i64), i64 -1) |
| ret i64 %out |
| } |
| |
| |
| define i64 @Vec2(i64 %in) { |
| ; CHECK-LABEL: @Vec2( |
| ; CHECK-NEXT: ret i64 0 |
| ; |
| %out = and i64 %in, xor (i64 bitcast (<4 x i16> <i16 0, i16 0, i16 0, i16 0> to i64), i64 0) |
| ret i64 %out |
| } |
| |
| define i64 @All11(i64 %in) { |
| ; CHECK-LABEL: @All11( |
| ; CHECK-NEXT: ret i64 0 |
| ; |
| %out = and i64 %in, xor (i64 bitcast (<2 x float> bitcast (i64 -1 to <2 x float>) to i64), i64 -1) |
| ret i64 %out |
| } |
| |
| |
| define i32 @All111(i32 %in) { |
| ; CHECK-LABEL: @All111( |
| ; CHECK-NEXT: ret i32 0 |
| ; |
| %out = and i32 %in, xor (i32 bitcast (<1 x float> bitcast (i32 -1 to <1 x float>) to i32), i32 -1) |
| ret i32 %out |
| } |
| |
| define <2 x i16> @BitcastInsert(i32 %a) { |
| ; CHECK-LABEL: @BitcastInsert( |
| ; CHECK-NEXT: [[R:%.*]] = bitcast i32 [[A:%.*]] to <2 x i16> |
| ; CHECK-NEXT: ret <2 x i16> [[R]] |
| ; |
| %v = insertelement <1 x i32> poison, i32 %a, i32 0 |
| %r = bitcast <1 x i32> %v to <2 x i16> |
| ret <2 x i16> %r |
| } |
| |
| ; PR17293 |
| define <2 x i64> @test7(<2 x i8*>* %arg) nounwind { |
| ; CHECK-LABEL: @test7( |
| ; CHECK-NEXT: [[CAST:%.*]] = bitcast <2 x i8*>* [[ARG:%.*]] to <2 x i64>* |
| ; CHECK-NEXT: [[LOAD:%.*]] = load <2 x i64>, <2 x i64>* [[CAST]], align 16 |
| ; CHECK-NEXT: ret <2 x i64> [[LOAD]] |
| ; |
| %cast = bitcast <2 x i8*>* %arg to <2 x i64>* |
| %load = load <2 x i64>, <2 x i64>* %cast, align 16 |
| ret <2 x i64> %load |
| } |
| |
| define i8 @test8() { |
| ; CHECK-LABEL: @test8( |
| ; CHECK-NEXT: ret i8 -85 |
| ; |
| %res = bitcast <8 x i1> <i1 true, i1 true, i1 false, i1 true, i1 false, i1 true, i1 false, i1 true> to i8 |
| ret i8 %res |
| } |
| |
| @g = internal unnamed_addr global i32 undef |
| |
| define void @constant_fold_vector_to_double() { |
| ; CHECK-LABEL: @constant_fold_vector_to_double( |
| ; CHECK-NEXT: store volatile double 1.000000e+00, double* undef, align 8 |
| ; CHECK-NEXT: store volatile double 1.000000e+00, double* undef, align 8 |
| ; CHECK-NEXT: store volatile double 1.000000e+00, double* undef, align 8 |
| ; CHECK-NEXT: store volatile double 1.000000e+00, double* undef, align 8 |
| ; CHECK-NEXT: store volatile double 0xFFFFFFFFFFFFFFFF, double* undef, align 8 |
| ; CHECK-NEXT: store volatile double 0x162E000004D2, double* undef, align 8 |
| ; CHECK-NEXT: store volatile double bitcast (<2 x i32> <i32 1234, i32 ptrtoint (i32* @g to i32)> to double), double* undef, align 8 |
| ; CHECK-NEXT: store volatile double 0x400000003F800000, double* undef, align 8 |
| ; CHECK-NEXT: store volatile double 0.000000e+00, double* undef, align 8 |
| ; CHECK-NEXT: store volatile double 0.000000e+00, double* undef, align 8 |
| ; CHECK-NEXT: store volatile double 0.000000e+00, double* undef, align 8 |
| ; CHECK-NEXT: store volatile double 0.000000e+00, double* undef, align 8 |
| ; CHECK-NEXT: store volatile double 0.000000e+00, double* undef, align 8 |
| ; CHECK-NEXT: store volatile double 0.000000e+00, double* undef, align 8 |
| ; CHECK-NEXT: ret void |
| ; |
| store volatile double bitcast (<1 x i64> <i64 4607182418800017408> to double), double* undef |
| store volatile double bitcast (<2 x i32> <i32 0, i32 1072693248> to double), double* undef |
| store volatile double bitcast (<4 x i16> <i16 0, i16 0, i16 0, i16 16368> to double), double* undef |
| store volatile double bitcast (<8 x i8> <i8 0, i8 0, i8 0, i8 0, i8 0, i8 0, i8 240, i8 63> to double), double* undef |
| |
| store volatile double bitcast (<2 x i32> <i32 -1, i32 -1> to double), double* undef |
| store volatile double bitcast (<2 x i32> <i32 1234, i32 5678> to double), double* undef |
| |
| store volatile double bitcast (<2 x i32> <i32 1234, i32 ptrtoint (i32* @g to i32)> to double), double* undef |
| store volatile double bitcast (<2 x float> <float 1.0, float 2.0> to double), double* undef |
| |
| store volatile double bitcast (<2 x i32> zeroinitializer to double), double* undef |
| store volatile double bitcast (<4 x i16> zeroinitializer to double), double* undef |
| store volatile double bitcast (<8 x i8> zeroinitializer to double), double* undef |
| store volatile double bitcast (<16 x i4> zeroinitializer to double), double* undef |
| store volatile double bitcast (<32 x i2> zeroinitializer to double), double* undef |
| store volatile double bitcast (<64 x i1> zeroinitializer to double), double* undef |
| ret void |
| } |
| |
| define void @constant_fold_vector_to_float() { |
| ; CHECK-LABEL: @constant_fold_vector_to_float( |
| ; CHECK-NEXT: store volatile float 1.000000e+00, float* undef, align 4 |
| ; CHECK-NEXT: store volatile float 1.000000e+00, float* undef, align 4 |
| ; CHECK-NEXT: store volatile float 1.000000e+00, float* undef, align 4 |
| ; CHECK-NEXT: store volatile float 1.000000e+00, float* undef, align 4 |
| ; CHECK-NEXT: ret void |
| ; |
| store volatile float bitcast (<1 x i32> <i32 1065353216> to float), float* undef |
| store volatile float bitcast (<2 x i16> <i16 0, i16 16256> to float), float* undef |
| store volatile float bitcast (<4 x i8> <i8 0, i8 0, i8 128, i8 63> to float), float* undef |
| store volatile float bitcast (<32 x i1> <i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 0, i1 1, i1 1, i1 1, i1 1, i1 1, i1 1, i1 1, i1 0, i1 0> to float), float* undef |
| |
| ret void |
| } |
| |
| define void @constant_fold_vector_to_half() { |
| ; CHECK-LABEL: @constant_fold_vector_to_half( |
| ; CHECK-NEXT: store volatile half 0xH4000, half* undef, align 2 |
| ; CHECK-NEXT: store volatile half 0xH4000, half* undef, align 2 |
| ; CHECK-NEXT: ret void |
| ; |
| store volatile half bitcast (<2 x i8> <i8 0, i8 64> to half), half* undef |
| store volatile half bitcast (<4 x i4> <i4 0, i4 0, i4 0, i4 4> to half), half* undef |
| ret void |
| } |
| |
| ; Ensure that we do not crash when looking at such a weird bitcast. |
| define i8* @bitcast_from_single_element_pointer_vector_to_pointer(<1 x i8*> %ptrvec) { |
| ; CHECK-LABEL: @bitcast_from_single_element_pointer_vector_to_pointer( |
| ; CHECK-NEXT: [[TMP1:%.*]] = extractelement <1 x i8*> [[PTRVEC:%.*]], i32 0 |
| ; CHECK-NEXT: ret i8* [[TMP1]] |
| ; |
| %ptr = bitcast <1 x i8*> %ptrvec to i8* |
| ret i8* %ptr |
| } |