# RUN: llc -run-pass arm-cp-islands %s -o - | FileCheck %s

--- |
  ; ModuleID = '<stdin>'
  source_filename = "<stdin>"
  target datalayout = "e-m:e-p:32:32-i64:64-v128:64:128-a:0:32-n32-S64"
  target triple = "thumbv6m--none-eabi"

  declare void @exit0()

  declare void @exit1(i32)

  declare void @exit2()

  declare void @exit3()

  declare void @exit4()

  define void @jump_table(i32 %val, i32 %arg2, i32 %arg3, i32 %arg4) {
  entry:
    switch i32 %val, label %default [
      i32 1, label %lab1
      i32 2, label %lab2
      i32 3, label %lab3
      i32 4, label %lab4
    ]

  default:                                          ; preds = %entry
    tail call void @exit0()
    ret void

  lab1:                                             ; preds = %entry
    %b = sub i32 %val, 1
    %a = shl i32 %b, 2
    tail call void @exit1(i32 %a)
    ret void

  lab2:                                             ; preds = %entry
    tail call void @exit2()
    ret void

  lab3:                                             ; preds = %entry
    tail call void @exit3()
    ret void

  lab4:                                             ; preds = %entry
    tail call void @exit4()
    ret void
  }

  ; Function Attrs: nounwind
  declare void @llvm.stackprotector(i8*, i8**) #0

  attributes #0 = { nounwind }

...
---
name:            jump_table
alignment:       2
exposesReturnsTwice: false
legalized:       false
regBankSelected: false
selected:        false
tracksRegLiveness: true
liveins:
  - { reg: '$r0' }
calleeSavedRegisters: [ '$lr', '$d8', '$d9', '$d10', '$d11', '$d12', '$d13',
                        '$d14', '$d15', '$q4', '$q5', '$q6', '$q7', '$r4',
                        '$r5', '$r6', '$r7', '$r8', '$r9', '$r10', '$r11',
                        '$s16', '$s17', '$s18', '$s19', '$s20', '$s21',
                        '$s22', '$s23', '$s24', '$s25', '$s26', '$s27',
                        '$s28', '$s29', '$s30', '$s31', '$d8_d10', '$d9_d11',
                        '$d10_d12', '$d11_d13', '$d12_d14', '$d13_d15',
                        '$q4_q5', '$q5_q6', '$q6_q7', '$q4_q5_q6_q7', '$r4_r5',
                        '$r6_r7', '$r8_r9', '$r10_r11', '$d8_d9_d10', '$d9_d10_d11',
                        '$d10_d11_d12', '$d11_d12_d13', '$d12_d13_d14',
                        '$d13_d14_d15', '$d8_d10_d12', '$d9_d11_d13', '$d10_d12_d14',
                        '$d11_d13_d15', '$d8_d10_d12_d14', '$d9_d11_d13_d15',
                        '$d9_d10', '$d11_d12', '$d13_d14', '$d9_d10_d11_d12',
                        '$d11_d12_d13_d14' ]
frameInfo:
  isFrameAddressTaken: false
  isReturnAddressTaken: false
  hasStackMap:     false
  hasPatchPoint:   false
  stackSize:       8
  offsetAdjustment: 0
  maxAlignment:    4
  adjustsStack:    true
  hasCalls:        true
  maxCallFrameSize: 0
  hasOpaqueSPAdjustment: false
  hasVAStart:      false
  hasMustTailInVarArgFunc: false
stack:
  - { id: 0, type: spill-slot, offset: -4, size: 4, alignment: 4, callee-saved-register: '$lr', callee-saved-restored: false }
  - { id: 1, type: spill-slot, offset: -8, size: 4, alignment: 4, callee-saved-register: '$r7' }
jumpTable:
  kind:            inline
  entries:
    - id:              0
      blocks:          [ '%bb.3.lab1', '%bb.4.lab2', '%bb.5.lab3', '%bb.6.lab4' ]
# r1 is redefined in the middle of the recognizable jump sequence - it shouldn't be clobbered!
# CHECK-NOT: tTBB_JT

body:             |
  bb.0.entry:
    successors: %bb.2.default(0x19999998), %bb.1.entry(0x66666668)
    liveins: $r0, $r7, $lr

    frame-setup tPUSH 14, $noreg, killed $r7, killed $lr, implicit-def $sp, implicit $sp
    frame-setup CFI_INSTRUCTION def_cfa_offset 8
    frame-setup CFI_INSTRUCTION offset $lr, -4
    frame-setup CFI_INSTRUCTION offset $r7, -8
    $r1, dead $cpsr = tSUBi3 $r0, 1, 14, $noreg
    tCMPi8 $r1, 3, 14, $noreg, implicit-def $cpsr
    tBcc %bb.2.default, 8, killed $cpsr

  bb.1.entry:
    successors: %bb.3.lab1(0x20000000), %bb.4.lab2(0x20000000), %bb.5.lab3(0x20000000), %bb.6.lab4(0x20000000)
    liveins: $r0, $r1

    $r1, dead $cpsr = tLSLri killed $r1, 2, 14, $noreg
    $r2 = tLEApcrelJT %jump-table.0, 14, $noreg
    $r2 = tLDRr killed $r1, killed $r2, 14, $noreg :: (load (s32) from jump-table)
    $r1, dead $cpsr = tLSLri $r2, 2, 14, $noreg
    tBR_JTr killed $r2, %jump-table.0

  bb.2.default:
    tBL 14, $noreg, @exit0, csr_aapcs, implicit-def dead $lr, implicit $sp, implicit-def $sp
    tPOP_RET 14, $noreg, def $r7, def $pc, implicit-def $sp, implicit $sp

  bb.3.lab1:
    liveins: $r0,$r1

    tBL 14, $noreg, @exit1, csr_aapcs, implicit-def dead $lr, implicit $sp, implicit $r0, implicit-def $sp
    tPOP_RET 14, $noreg, def $r7, def $pc, implicit-def $sp, implicit $sp

  bb.4.lab2:
    tBL 14, $noreg, @exit2, csr_aapcs, implicit-def dead $lr, implicit $sp, implicit-def $sp
    tPOP_RET 14, $noreg, def $r7, def $pc, implicit-def $sp, implicit $sp

  bb.5.lab3:
    tBL 14, $noreg, @exit3, csr_aapcs, implicit-def dead $lr, implicit $sp, implicit-def $sp
    tPOP_RET 14, $noreg, def $r7, def $pc, implicit-def $sp, implicit $sp

  bb.6.lab4:
    tBL 14, $noreg, @exit4, csr_aapcs, implicit-def dead $lr, implicit $sp, implicit-def $sp
    tPOP_RET 14, $noreg, def $r7, def $pc, implicit-def $sp, implicit $sp

...