//===-- Utils which wrap MPFR ---------------------------------------------===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//

#include "MPFRUtils.h"

#include "src/__support/CPP/array.h"
#include "src/__support/CPP/string.h"
#include "src/__support/CPP/string_view.h"
#include "src/__support/CPP/stringstream.h"
#include "src/__support/FPUtil/FPBits.h"
#include "src/__support/FPUtil/cast.h"
#include "src/__support/FPUtil/fpbits_str.h"
#include "src/__support/macros/config.h"
#include "src/__support/macros/properties/types.h"

#include <stdint.h>

#include "mpfr_inc.h"

#ifdef LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE
extern "C" {
int mpfr_set_float128(mpfr_ptr, float128, mpfr_rnd_t);
float128 mpfr_get_float128(mpfr_srcptr, mpfr_rnd_t);
}
#endif

template <typename T> using FPBits = LIBC_NAMESPACE::fputil::FPBits<T>;

namespace LIBC_NAMESPACE_DECL {
namespace testing {
namespace mpfr {

// A precision value which allows sufficiently large additional
// precision compared to the floating point precision.
template <typename T> struct ExtraPrecision;

#ifdef LIBC_TYPES_HAS_FLOAT16
template <> struct ExtraPrecision<float16> {
  static constexpr unsigned int VALUE = 128;
};
#endif

template <> struct ExtraPrecision<float> {
  static constexpr unsigned int VALUE = 128;
};

template <> struct ExtraPrecision<double> {
  static constexpr unsigned int VALUE = 256;
};

template <> struct ExtraPrecision<long double> {
#ifdef LIBC_TYPES_LONG_DOUBLE_IS_FLOAT128
  static constexpr unsigned int VALUE = 512;
#else
  static constexpr unsigned int VALUE = 256;
#endif
};

#if defined(LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE)
template <> struct ExtraPrecision<float128> {
  static constexpr unsigned int VALUE = 512;
};
#endif // LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE

// If the ulp tolerance is less than or equal to 0.5, we would check that the
// result is rounded correctly with respect to the rounding mode by using the
// same precision as the inputs.
template <typename T>
static inline unsigned int get_precision(double ulp_tolerance) {
  if (ulp_tolerance <= 0.5) {
    return LIBC_NAMESPACE::fputil::FPBits<T>::FRACTION_LEN + 1;
  } else {
    return ExtraPrecision<T>::VALUE;
  }
}

static inline mpfr_rnd_t get_mpfr_rounding_mode(RoundingMode mode) {
  switch (mode) {
  case RoundingMode::Upward:
    return MPFR_RNDU;
    break;
  case RoundingMode::Downward:
    return MPFR_RNDD;
    break;
  case RoundingMode::TowardZero:
    return MPFR_RNDZ;
    break;
  case RoundingMode::Nearest:
    return MPFR_RNDN;
    break;
  }
  __builtin_unreachable();
}

class MPFRNumber {
  unsigned int mpfr_precision;
  mpfr_rnd_t mpfr_rounding;

  mpfr_t value;

public:
  MPFRNumber() : mpfr_precision(256), mpfr_rounding(MPFR_RNDN) {
    mpfr_init2(value, mpfr_precision);
  }

  // We use explicit EnableIf specializations to disallow implicit
  // conversions. Implicit conversions can potentially lead to loss of
  // precision. We exceptionally allow implicit conversions from float16
  // to float, as the MPFR API does not support float16, thus requiring
  // conversion to a higher-precision format.
  template <typename XType,
            cpp::enable_if_t<cpp::is_same_v<float, XType>
#ifdef LIBC_TYPES_HAS_FLOAT16
                                 || cpp::is_same_v<float16, XType>
#endif
                             ,
                             int> = 0>
  explicit MPFRNumber(XType x,
                      unsigned int precision = ExtraPrecision<XType>::VALUE,
                      RoundingMode rounding = RoundingMode::Nearest)
      : mpfr_precision(precision),
        mpfr_rounding(get_mpfr_rounding_mode(rounding)) {
    mpfr_init2(value, mpfr_precision);
    mpfr_set_flt(value, x, mpfr_rounding);
  }

  template <typename XType,
            cpp::enable_if_t<cpp::is_same_v<double, XType>, int> = 0>
  explicit MPFRNumber(XType x,
                      unsigned int precision = ExtraPrecision<XType>::VALUE,
                      RoundingMode rounding = RoundingMode::Nearest)
      : mpfr_precision(precision),
        mpfr_rounding(get_mpfr_rounding_mode(rounding)) {
    mpfr_init2(value, mpfr_precision);
    mpfr_set_d(value, x, mpfr_rounding);
  }

  template <typename XType,
            cpp::enable_if_t<cpp::is_same_v<long double, XType>, int> = 0>
  explicit MPFRNumber(XType x,
                      unsigned int precision = ExtraPrecision<XType>::VALUE,
                      RoundingMode rounding = RoundingMode::Nearest)
      : mpfr_precision(precision),
        mpfr_rounding(get_mpfr_rounding_mode(rounding)) {
    mpfr_init2(value, mpfr_precision);
    mpfr_set_ld(value, x, mpfr_rounding);
  }

#ifdef LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE
  template <typename XType,
            cpp::enable_if_t<cpp::is_same_v<float128, XType>, int> = 0>
  explicit MPFRNumber(XType x,
                      unsigned int precision = ExtraPrecision<XType>::VALUE,
                      RoundingMode rounding = RoundingMode::Nearest)
      : mpfr_precision(precision),
        mpfr_rounding(get_mpfr_rounding_mode(rounding)) {
    mpfr_init2(value, mpfr_precision);
    mpfr_set_float128(value, x, mpfr_rounding);
  }
#endif // LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE

  template <typename XType,
            cpp::enable_if_t<cpp::is_integral_v<XType>, int> = 0>
  explicit MPFRNumber(XType x,
                      unsigned int precision = ExtraPrecision<float>::VALUE,
                      RoundingMode rounding = RoundingMode::Nearest)
      : mpfr_precision(precision),
        mpfr_rounding(get_mpfr_rounding_mode(rounding)) {
    mpfr_init2(value, mpfr_precision);
    mpfr_set_sj(value, x, mpfr_rounding);
  }

  MPFRNumber(const MPFRNumber &other)
      : mpfr_precision(other.mpfr_precision),
        mpfr_rounding(other.mpfr_rounding) {
    mpfr_init2(value, mpfr_precision);
    mpfr_set(value, other.value, mpfr_rounding);
  }

  MPFRNumber(const MPFRNumber &other, unsigned int precision)
      : mpfr_precision(precision), mpfr_rounding(other.mpfr_rounding) {
    mpfr_init2(value, mpfr_precision);
    mpfr_set(value, other.value, mpfr_rounding);
  }

  ~MPFRNumber() { mpfr_clear(value); }

  MPFRNumber &operator=(const MPFRNumber &rhs) {
    mpfr_precision = rhs.mpfr_precision;
    mpfr_rounding = rhs.mpfr_rounding;
    mpfr_set(value, rhs.value, mpfr_rounding);
    return *this;
  }

  bool is_nan() const { return mpfr_nan_p(value); }

  MPFRNumber abs() const {
    MPFRNumber result(*this);
    mpfr_abs(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber acos() const {
    MPFRNumber result(*this);
    mpfr_acos(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber acosh() const {
    MPFRNumber result(*this);
    mpfr_acosh(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber add(const MPFRNumber &b) const {
    MPFRNumber result(*this);
    mpfr_add(result.value, value, b.value, mpfr_rounding);
    return result;
  }

  MPFRNumber asin() const {
    MPFRNumber result(*this);
    mpfr_asin(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber asinh() const {
    MPFRNumber result(*this);
    mpfr_asinh(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber atan() const {
    MPFRNumber result(*this);
    mpfr_atan(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber atan2(const MPFRNumber &b) {
    MPFRNumber result(*this);
    mpfr_atan2(result.value, value, b.value, mpfr_rounding);
    return result;
  }

  MPFRNumber atanh() const {
    MPFRNumber result(*this);
    mpfr_atanh(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber cbrt() const {
    MPFRNumber result(*this);
    mpfr_cbrt(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber ceil() const {
    MPFRNumber result(*this);
    mpfr_ceil(result.value, value);
    return result;
  }

  MPFRNumber cos() const {
    MPFRNumber result(*this);
    mpfr_cos(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber cosh() const {
    MPFRNumber result(*this);
    mpfr_cosh(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber cospi() const {
    MPFRNumber result(*this);

#if MPFR_VERSION_MAJOR > 4 ||                                                  \
    (MPFR_VERSION_MAJOR == 4 && MPFR_VERSION_MINOR >= 2)
    mpfr_cospi(result.value, value, mpfr_rounding);
    return result;
#else
    if (mpfr_integer_p(value)) {
      mpz_t integer;
      mpz_init(integer);
      mpfr_get_z(integer, value, mpfr_rounding);

      int d = mpz_tstbit(integer, 0);
      mpfr_set_si(result.value, d ? -1 : 1, mpfr_rounding);
      mpz_clear(integer);
      return result;
    }

    MPFRNumber value_pi(0.0, 1280);
    mpfr_const_pi(value_pi.value, MPFR_RNDN);
    mpfr_mul(value_pi.value, value_pi.value, value, MPFR_RNDN);
    mpfr_cos(result.value, value_pi.value, mpfr_rounding);

    return result;
#endif
  }

  MPFRNumber erf() const {
    MPFRNumber result(*this);
    mpfr_erf(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber exp() const {
    MPFRNumber result(*this);
    mpfr_exp(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber exp2() const {
    MPFRNumber result(*this);
    mpfr_exp2(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber exp2m1() const {
    // TODO: Only use mpfr_exp2m1 once CI and buildbots get MPFR >= 4.2.0.
#if MPFR_VERSION_MAJOR > 4 ||                                                  \
    (MPFR_VERSION_MAJOR == 4 && MPFR_VERSION_MINOR >= 2)
    MPFRNumber result(*this);
    mpfr_exp2m1(result.value, value, mpfr_rounding);
    return result;
#else
    unsigned int prec = mpfr_precision * 3;
    MPFRNumber result(*this, prec);

    float f = mpfr_get_flt(abs().value, mpfr_rounding);
    if (f > 0.5f && f < 0x1.0p30f) {
      mpfr_exp2(result.value, value, mpfr_rounding);
      mpfr_sub_ui(result.value, result.value, 1, mpfr_rounding);
      return result;
    }

    MPFRNumber ln2(2.0f, prec);
    // log(2)
    mpfr_log(ln2.value, ln2.value, mpfr_rounding);
    // x * log(2)
    mpfr_mul(result.value, value, ln2.value, mpfr_rounding);
    // e^(x * log(2)) - 1
    int ex = mpfr_expm1(result.value, result.value, mpfr_rounding);
    mpfr_subnormalize(result.value, ex, mpfr_rounding);
    return result;
#endif
  }

  MPFRNumber exp10() const {
    MPFRNumber result(*this);
    mpfr_exp10(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber exp10m1() const {
    // TODO: Only use mpfr_exp10m1 once CI and buildbots get MPFR >= 4.2.0.
#if MPFR_VERSION_MAJOR > 4 ||                                                  \
    (MPFR_VERSION_MAJOR == 4 && MPFR_VERSION_MINOR >= 2)
    MPFRNumber result(*this);
    mpfr_exp10m1(result.value, value, mpfr_rounding);
    return result;
#else
    unsigned int prec = mpfr_precision * 3;
    MPFRNumber result(*this, prec);

    MPFRNumber ln10(10.0f, prec);
    // log(10)
    mpfr_log(ln10.value, ln10.value, mpfr_rounding);
    // x * log(10)
    mpfr_mul(result.value, value, ln10.value, mpfr_rounding);
    // e^(x * log(10)) - 1
    int ex = mpfr_expm1(result.value, result.value, mpfr_rounding);
    mpfr_subnormalize(result.value, ex, mpfr_rounding);
    return result;
#endif
  }

  MPFRNumber expm1() const {
    MPFRNumber result(*this);
    mpfr_expm1(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber div(const MPFRNumber &b) const {
    MPFRNumber result(*this);
    mpfr_div(result.value, value, b.value, mpfr_rounding);
    return result;
  }

  MPFRNumber floor() const {
    MPFRNumber result(*this);
    mpfr_floor(result.value, value);
    return result;
  }

  MPFRNumber fmod(const MPFRNumber &b) {
    MPFRNumber result(*this);
    mpfr_fmod(result.value, value, b.value, mpfr_rounding);
    return result;
  }

  MPFRNumber frexp(int &exp) {
    MPFRNumber result(*this);
    mpfr_exp_t resultExp;
    mpfr_frexp(&resultExp, result.value, value, mpfr_rounding);
    exp = resultExp;
    return result;
  }

  MPFRNumber hypot(const MPFRNumber &b) {
    MPFRNumber result(*this);
    mpfr_hypot(result.value, value, b.value, mpfr_rounding);
    return result;
  }

  MPFRNumber log() const {
    MPFRNumber result(*this);
    mpfr_log(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber log2() const {
    MPFRNumber result(*this);
    mpfr_log2(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber log10() const {
    MPFRNumber result(*this);
    mpfr_log10(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber log1p() const {
    MPFRNumber result(*this);
    mpfr_log1p(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber pow(const MPFRNumber &b) {
    MPFRNumber result(*this);
    mpfr_pow(result.value, value, b.value, mpfr_rounding);
    return result;
  }

  MPFRNumber remquo(const MPFRNumber &divisor, int &quotient) {
    MPFRNumber remainder(*this);
    long q;
    mpfr_remquo(remainder.value, &q, value, divisor.value, mpfr_rounding);
    quotient = q;
    return remainder;
  }

  MPFRNumber round() const {
    MPFRNumber result(*this);
    mpfr_round(result.value, value);
    return result;
  }

  MPFRNumber roundeven() const {
    MPFRNumber result(*this);
#if MPFR_VERSION_MAJOR >= 4
    mpfr_roundeven(result.value, value);
#else
    mpfr_rint(result.value, value, MPFR_RNDN);
#endif
    return result;
  }

  bool round_to_long(long &result) const {
    // We first calculate the rounded value. This way, when converting
    // to long using mpfr_get_si, the rounding direction of MPFR_RNDN
    // (or any other rounding mode), does not have an influence.
    MPFRNumber roundedValue = round();
    mpfr_clear_erangeflag();
    result = mpfr_get_si(roundedValue.value, MPFR_RNDN);
    return mpfr_erangeflag_p();
  }

  bool round_to_long(mpfr_rnd_t rnd, long &result) const {
    MPFRNumber rint_result(*this);
    mpfr_rint(rint_result.value, value, rnd);
    return rint_result.round_to_long(result);
  }

  MPFRNumber rint(mpfr_rnd_t rnd) const {
    MPFRNumber result(*this);
    mpfr_rint(result.value, value, rnd);
    return result;
  }

  MPFRNumber mod_2pi() const {
    MPFRNumber result(0.0, 1280);
    MPFRNumber _2pi(0.0, 1280);
    mpfr_const_pi(_2pi.value, MPFR_RNDN);
    mpfr_mul_si(_2pi.value, _2pi.value, 2, MPFR_RNDN);
    mpfr_fmod(result.value, value, _2pi.value, MPFR_RNDN);
    return result;
  }

  MPFRNumber mod_pi_over_2() const {
    MPFRNumber result(0.0, 1280);
    MPFRNumber pi_over_2(0.0, 1280);
    mpfr_const_pi(pi_over_2.value, MPFR_RNDN);
    mpfr_mul_d(pi_over_2.value, pi_over_2.value, 0.5, MPFR_RNDN);
    mpfr_fmod(result.value, value, pi_over_2.value, MPFR_RNDN);
    return result;
  }

  MPFRNumber mod_pi_over_4() const {
    MPFRNumber result(0.0, 1280);
    MPFRNumber pi_over_4(0.0, 1280);
    mpfr_const_pi(pi_over_4.value, MPFR_RNDN);
    mpfr_mul_d(pi_over_4.value, pi_over_4.value, 0.25, MPFR_RNDN);
    mpfr_fmod(result.value, value, pi_over_4.value, MPFR_RNDN);
    return result;
  }

  MPFRNumber sin() const {
    MPFRNumber result(*this);
    mpfr_sin(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber sinpi() const {
    MPFRNumber result(*this);

#if MPFR_VERSION_MAJOR > 4 ||                                                  \
    (MPFR_VERSION_MAJOR == 4 && MPFR_VERSION_MINOR >= 2)

    mpfr_sinpi(result.value, value, mpfr_rounding);
    return result;
#else
    if (mpfr_integer_p(value)) {
      mpfr_set_si(result.value, 0, mpfr_rounding);
      return result;
    }

    MPFRNumber value_mul_two(*this);
    mpfr_mul_si(value_mul_two.value, value, 2, MPFR_RNDN);

    if (mpfr_integer_p(value_mul_two.value)) {
      auto d = mpfr_get_si(value, MPFR_RNDD);
      mpfr_set_si(result.value, (d & 1) ? -1 : 1, mpfr_rounding);
      return result;
    }

    MPFRNumber value_pi(0.0, 1280);
    mpfr_const_pi(value_pi.value, MPFR_RNDN);
    mpfr_mul(value_pi.value, value_pi.value, value, MPFR_RNDN);
    mpfr_sin(result.value, value_pi.value, mpfr_rounding);
    return result;
#endif
  }

  MPFRNumber sinh() const {
    MPFRNumber result(*this);
    mpfr_sinh(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber sqrt() const {
    MPFRNumber result(*this);
    mpfr_sqrt(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber sub(const MPFRNumber &b) const {
    MPFRNumber result(*this);
    mpfr_sub(result.value, value, b.value, mpfr_rounding);
    return result;
  }

  MPFRNumber tan() const {
    MPFRNumber result(*this);
    mpfr_tan(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber tanh() const {
    MPFRNumber result(*this);
    mpfr_tanh(result.value, value, mpfr_rounding);
    return result;
  }

  MPFRNumber tanpi() const {
    MPFRNumber result(*this);

#if MPFR_VERSION_MAJOR > 4 ||                                                  \
    (MPFR_VERSION_MAJOR == 4 && MPFR_VERSION_MINOR >= 2)

    mpfr_tanpi(result.value, value, mpfr_rounding);
    return result;
#else
    MPFRNumber value_ret_exact(*this);
    MPFRNumber value_one(*this);
    mpfr_set_si(value_one.value, 1, MPFR_RNDN);
    mpfr_fmod(value_ret_exact.value, value, value_one.value, mpfr_rounding);
    mpfr_mul_si(value_ret_exact.value, value_ret_exact.value, 4, MPFR_RNDN);

    if (mpfr_integer_p(value_ret_exact.value)) {
      int mod = mpfr_get_si(value_ret_exact.value, MPFR_RNDN);
      mod = (mod < 0 ? -1 * mod : mod);

      switch (mod) {
      case 0:
        mpfr_set_si(result.value, 0, mpfr_rounding);
        break;
      case 1:
        mpfr_set_si(result.value, (mpfr_signbit(value) ? -1 : 1),
                    mpfr_rounding);
        break;
      case 2: {
        auto d = mpfr_get_si(value, MPFR_RNDZ);
        d += mpfr_sgn(value) > 0 ? 0 : 1;
        mpfr_set_inf(result.value, (d & 1) ? -1 : 1);
        break;
      }
      case 3:
        mpfr_set_si(result.value, (mpfr_signbit(value) ? 1 : -1),
                    mpfr_rounding);
        break;
      }

      return result;
    }

    MPFRNumber value_pi(0.0, 1280);
    mpfr_const_pi(value_pi.value, MPFR_RNDN);
    mpfr_mul(value_pi.value, value_pi.value, value, MPFR_RNDN);
    mpfr_tan(result.value, value_pi.value, mpfr_rounding);
    return result;
#endif
  }

  MPFRNumber trunc() const {
    MPFRNumber result(*this);
    mpfr_trunc(result.value, value);
    return result;
  }

  MPFRNumber fma(const MPFRNumber &b, const MPFRNumber &c) {
    MPFRNumber result(*this);
    mpfr_fma(result.value, value, b.value, c.value, mpfr_rounding);
    return result;
  }

  MPFRNumber mul(const MPFRNumber &b) {
    MPFRNumber result(*this);
    mpfr_mul(result.value, value, b.value, mpfr_rounding);
    return result;
  }

  cpp::string str() const {
    // 200 bytes should be more than sufficient to hold a 100-digit number
    // plus additional bytes for the decimal point, '-' sign etc.
    constexpr size_t printBufSize = 200;
    char buffer[printBufSize];
    mpfr_snprintf(buffer, printBufSize, "%100.50Rf", value);
    cpp::string_view view(buffer);
    // Trim whitespaces
    const char whitespace = ' ';
    while (!view.empty() && view.front() == whitespace)
      view.remove_prefix(1);
    while (!view.empty() && view.back() == whitespace)
      view.remove_suffix(1);
    return cpp::string(view.data());
  }

  // These functions are useful for debugging.
  template <typename T> T as() const;

  void dump(const char *msg) const { mpfr_printf("%s%.128g\n", msg, value); }

  // Return the ULP (units-in-the-last-place) difference between the
  // stored MPFR and a floating point number.
  //
  // We define ULP difference as follows:
  //   If exponents of this value and the |input| are same, then:
  //     ULP(this_value, input) = abs(this_value - input) / eps(input)
  //   else:
  //     max = max(abs(this_value), abs(input))
  //     min = min(abs(this_value), abs(input))
  //     maxExponent = exponent(max)
  //     ULP(this_value, input) = (max - 2^maxExponent) / eps(max) +
  //                              (2^maxExponent - min) / eps(min)
  //
  // Remarks:
  // 1. A ULP of 0.0 will imply that the value is correctly rounded.
  // 2. We expect that this value and the value to be compared (the [input]
  //    argument) are reasonable close, and we will provide an upper bound
  //    of ULP value for testing.  Morever, most of the fractional parts of
  //    ULP value do not matter much, so using double as the return type
  //    should be good enough.
  // 3. For close enough values (values which don't diff in their exponent by
  //    not more than 1), a ULP difference of N indicates a bit distance
  //    of N between this number and [input].
  // 4. A values of +0.0 and -0.0 are treated as equal.
  template <typename T>
  cpp::enable_if_t<cpp::is_floating_point_v<T>, MPFRNumber>
  ulp_as_mpfr_number(T input) {
    T thisAsT = as<T>();
    if (thisAsT == input)
      return MPFRNumber(0.0);

    if (is_nan()) {
      if (FPBits<T>(input).is_nan())
        return MPFRNumber(0.0);
      return MPFRNumber(FPBits<T>::inf().get_val());
    }

    int thisExponent = FPBits<T>(thisAsT).get_exponent();
    int inputExponent = FPBits<T>(input).get_exponent();
    // Adjust the exponents for denormal numbers.
    if (FPBits<T>(thisAsT).is_subnormal())
      ++thisExponent;
    if (FPBits<T>(input).is_subnormal())
      ++inputExponent;

    if (thisAsT * input < 0 || thisExponent == inputExponent) {
      MPFRNumber inputMPFR(input);
      mpfr_sub(inputMPFR.value, value, inputMPFR.value, MPFR_RNDN);
      mpfr_abs(inputMPFR.value, inputMPFR.value, MPFR_RNDN);
      mpfr_mul_2si(inputMPFR.value, inputMPFR.value,
                   -thisExponent + FPBits<T>::FRACTION_LEN, MPFR_RNDN);
      return inputMPFR;
    }

    // If the control reaches here, it means that this number and input are
    // of the same sign but different exponent. In such a case, ULP error is
    // calculated as sum of two parts.
    thisAsT = FPBits<T>(thisAsT).abs().get_val();
    input = FPBits<T>(input).abs().get_val();
    T min = thisAsT > input ? input : thisAsT;
    T max = thisAsT > input ? thisAsT : input;
    int minExponent = FPBits<T>(min).get_exponent();
    int maxExponent = FPBits<T>(max).get_exponent();
    // Adjust the exponents for denormal numbers.
    if (FPBits<T>(min).is_subnormal())
      ++minExponent;
    if (FPBits<T>(max).is_subnormal())
      ++maxExponent;

    MPFRNumber minMPFR(min);
    MPFRNumber maxMPFR(max);

    MPFRNumber pivot(uint32_t(1));
    mpfr_mul_2si(pivot.value, pivot.value, maxExponent, MPFR_RNDN);

    mpfr_sub(minMPFR.value, pivot.value, minMPFR.value, MPFR_RNDN);
    mpfr_mul_2si(minMPFR.value, minMPFR.value,
                 -minExponent + FPBits<T>::FRACTION_LEN, MPFR_RNDN);

    mpfr_sub(maxMPFR.value, maxMPFR.value, pivot.value, MPFR_RNDN);
    mpfr_mul_2si(maxMPFR.value, maxMPFR.value,
                 -maxExponent + FPBits<T>::FRACTION_LEN, MPFR_RNDN);

    mpfr_add(minMPFR.value, minMPFR.value, maxMPFR.value, MPFR_RNDN);
    return minMPFR;
  }

  template <typename T>
  cpp::enable_if_t<cpp::is_floating_point_v<T>, cpp::string>
  ulp_as_string(T input) {
    MPFRNumber num = ulp_as_mpfr_number(input);
    return num.str();
  }

  template <typename T>
  cpp::enable_if_t<cpp::is_floating_point_v<T>, double> ulp(T input) {
    MPFRNumber num = ulp_as_mpfr_number(input);
    return num.as<double>();
  }
};

template <> float MPFRNumber::as<float>() const {
  return mpfr_get_flt(value, mpfr_rounding);
}

template <> double MPFRNumber::as<double>() const {
  return mpfr_get_d(value, mpfr_rounding);
}

template <> long double MPFRNumber::as<long double>() const {
  return mpfr_get_ld(value, mpfr_rounding);
}

#ifdef LIBC_TYPES_HAS_FLOAT16
template <> float16 MPFRNumber::as<float16>() const {
  // TODO: Either prove that this cast won't cause double-rounding errors, or
  // find a better way to get a float16.
  return fputil::cast<float16>(mpfr_get_d(value, mpfr_rounding));
}
#endif

#ifdef LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE
template <> float128 MPFRNumber::as<float128>() const {
  return mpfr_get_float128(value, mpfr_rounding);
}

#endif // LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE

namespace internal {

template <typename InputType>
cpp::enable_if_t<cpp::is_floating_point_v<InputType>, MPFRNumber>
unary_operation(Operation op, InputType input, unsigned int precision,
                RoundingMode rounding) {
  MPFRNumber mpfrInput(input, precision, rounding);
  switch (op) {
  case Operation::Abs:
    return mpfrInput.abs();
  case Operation::Acos:
    return mpfrInput.acos();
  case Operation::Acosh:
    return mpfrInput.acosh();
  case Operation::Asin:
    return mpfrInput.asin();
  case Operation::Asinh:
    return mpfrInput.asinh();
  case Operation::Atan:
    return mpfrInput.atan();
  case Operation::Atanh:
    return mpfrInput.atanh();
  case Operation::Cbrt:
    return mpfrInput.cbrt();
  case Operation::Ceil:
    return mpfrInput.ceil();
  case Operation::Cos:
    return mpfrInput.cos();
  case Operation::Cosh:
    return mpfrInput.cosh();
  case Operation::Cospi:
    return mpfrInput.cospi();
  case Operation::Erf:
    return mpfrInput.erf();
  case Operation::Exp:
    return mpfrInput.exp();
  case Operation::Exp2:
    return mpfrInput.exp2();
  case Operation::Exp2m1:
    return mpfrInput.exp2m1();
  case Operation::Exp10:
    return mpfrInput.exp10();
  case Operation::Exp10m1:
    return mpfrInput.exp10m1();
  case Operation::Expm1:
    return mpfrInput.expm1();
  case Operation::Floor:
    return mpfrInput.floor();
  case Operation::Log:
    return mpfrInput.log();
  case Operation::Log2:
    return mpfrInput.log2();
  case Operation::Log10:
    return mpfrInput.log10();
  case Operation::Log1p:
    return mpfrInput.log1p();
  case Operation::Mod2PI:
    return mpfrInput.mod_2pi();
  case Operation::ModPIOver2:
    return mpfrInput.mod_pi_over_2();
  case Operation::ModPIOver4:
    return mpfrInput.mod_pi_over_4();
  case Operation::Round:
    return mpfrInput.round();
  case Operation::RoundEven:
    return mpfrInput.roundeven();
  case Operation::Sin:
    return mpfrInput.sin();
  case Operation::Sinpi:
    return mpfrInput.sinpi();
  case Operation::Sinh:
    return mpfrInput.sinh();
  case Operation::Sqrt:
    return mpfrInput.sqrt();
  case Operation::Tan:
    return mpfrInput.tan();
  case Operation::Tanh:
    return mpfrInput.tanh();
  case Operation::Tanpi:
    return mpfrInput.tanpi();
  case Operation::Trunc:
    return mpfrInput.trunc();
  default:
    __builtin_unreachable();
  }
}

template <typename InputType>
cpp::enable_if_t<cpp::is_floating_point_v<InputType>, MPFRNumber>
unary_operation_two_outputs(Operation op, InputType input, int &output,
                            unsigned int precision, RoundingMode rounding) {
  MPFRNumber mpfrInput(input, precision, rounding);
  switch (op) {
  case Operation::Frexp:
    return mpfrInput.frexp(output);
  default:
    __builtin_unreachable();
  }
}

template <typename InputType>
cpp::enable_if_t<cpp::is_floating_point_v<InputType>, MPFRNumber>
binary_operation_one_output(Operation op, InputType x, InputType y,
                            unsigned int precision, RoundingMode rounding) {
  MPFRNumber inputX(x, precision, rounding);
  MPFRNumber inputY(y, precision, rounding);
  switch (op) {
  case Operation::Add:
    return inputX.add(inputY);
  case Operation::Atan2:
    return inputX.atan2(inputY);
  case Operation::Div:
    return inputX.div(inputY);
  case Operation::Fmod:
    return inputX.fmod(inputY);
  case Operation::Hypot:
    return inputX.hypot(inputY);
  case Operation::Mul:
    return inputX.mul(inputY);
  case Operation::Pow:
    return inputX.pow(inputY);
  case Operation::Sub:
    return inputX.sub(inputY);
  default:
    __builtin_unreachable();
  }
}

template <typename InputType>
cpp::enable_if_t<cpp::is_floating_point_v<InputType>, MPFRNumber>
binary_operation_two_outputs(Operation op, InputType x, InputType y,
                             int &output, unsigned int precision,
                             RoundingMode rounding) {
  MPFRNumber inputX(x, precision, rounding);
  MPFRNumber inputY(y, precision, rounding);
  switch (op) {
  case Operation::RemQuo:
    return inputX.remquo(inputY, output);
  default:
    __builtin_unreachable();
  }
}

template <typename InputType>
cpp::enable_if_t<cpp::is_floating_point_v<InputType>, MPFRNumber>
ternary_operation_one_output(Operation op, InputType x, InputType y,
                             InputType z, unsigned int precision,
                             RoundingMode rounding) {
  // For FMA function, we just need to compare with the mpfr_fma with the same
  // precision as InputType.  Using higher precision as the intermediate results
  // to compare might incorrectly fail due to double-rounding errors.
  MPFRNumber inputX(x, precision, rounding);
  MPFRNumber inputY(y, precision, rounding);
  MPFRNumber inputZ(z, precision, rounding);
  switch (op) {
  case Operation::Fma:
    return inputX.fma(inputY, inputZ);
  default:
    __builtin_unreachable();
  }
}

// Remark: For all the explain_*_error functions, we will use std::stringstream
// to build the complete error messages before sending it to the outstream `OS`
// once at the end.  This will stop the error messages from interleaving when
// the tests are running concurrently.
template <typename InputType, typename OutputType>
void explain_unary_operation_single_output_error(Operation op, InputType input,
                                                 OutputType matchValue,
                                                 double ulp_tolerance,
                                                 RoundingMode rounding) {
  unsigned int precision = get_precision<InputType>(ulp_tolerance);
  MPFRNumber mpfrInput(input, precision);
  MPFRNumber mpfr_result;
  mpfr_result = unary_operation(op, input, precision, rounding);
  MPFRNumber mpfrMatchValue(matchValue);
  cpp::array<char, 1024> msg_buf;
  cpp::StringStream msg(msg_buf);
  msg << "Match value not within tolerance value of MPFR result:\n"
      << "  Input decimal: " << mpfrInput.str() << '\n';
  msg << "     Input bits: " << str(FPBits<InputType>(input)) << '\n';
  msg << '\n' << "  Match decimal: " << mpfrMatchValue.str() << '\n';
  msg << "     Match bits: " << str(FPBits<OutputType>(matchValue)) << '\n';
  msg << '\n' << "    MPFR result: " << mpfr_result.str() << '\n';
  msg << "   MPFR rounded: "
      << str(FPBits<OutputType>(mpfr_result.as<OutputType>())) << '\n';
  msg << '\n';
  msg << "      ULP error: " << mpfr_result.ulp_as_mpfr_number(matchValue).str()
      << '\n';
  if (msg.overflow())
    __builtin_unreachable();
  tlog << msg.str();
}

template void explain_unary_operation_single_output_error(Operation op, float,
                                                          float, double,
                                                          RoundingMode);
template void explain_unary_operation_single_output_error(Operation op, double,
                                                          double, double,
                                                          RoundingMode);
template void explain_unary_operation_single_output_error(Operation op,
                                                          long double,
                                                          long double, double,
                                                          RoundingMode);
template void explain_unary_operation_single_output_error(Operation op, double,
                                                          float, double,
                                                          RoundingMode);
template void explain_unary_operation_single_output_error(Operation op,
                                                          long double, float,
                                                          double, RoundingMode);
template void explain_unary_operation_single_output_error(Operation op,
                                                          long double, double,
                                                          double, RoundingMode);

#ifdef LIBC_TYPES_HAS_FLOAT16
template void explain_unary_operation_single_output_error(Operation op, float16,
                                                          float16, double,
                                                          RoundingMode);
template void explain_unary_operation_single_output_error(Operation op, float,
                                                          float16, double,
                                                          RoundingMode);
template void explain_unary_operation_single_output_error(Operation op, double,
                                                          float16, double,
                                                          RoundingMode);
template void explain_unary_operation_single_output_error(Operation op,
                                                          long double, float16,
                                                          double, RoundingMode);
#ifdef LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE
template void explain_unary_operation_single_output_error(Operation op,
                                                          float128, float16,
                                                          double, RoundingMode);
#endif // LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE
#endif // LIBC_TYPES_HAS_FLOAT16

#ifdef LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE
template void explain_unary_operation_single_output_error(Operation op,
                                                          float128, float128,
                                                          double, RoundingMode);
template void explain_unary_operation_single_output_error(Operation op,
                                                          float128, float,
                                                          double, RoundingMode);
template void explain_unary_operation_single_output_error(Operation op,
                                                          float128, double,
                                                          double, RoundingMode);
template void explain_unary_operation_single_output_error(Operation op,
                                                          float128, long double,
                                                          double, RoundingMode);
#endif // LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE

template <typename T>
void explain_unary_operation_two_outputs_error(
    Operation op, T input, const BinaryOutput<T> &libc_result,
    double ulp_tolerance, RoundingMode rounding) {
  unsigned int precision = get_precision<T>(ulp_tolerance);
  MPFRNumber mpfrInput(input, precision);
  int mpfrIntResult;
  MPFRNumber mpfr_result = unary_operation_two_outputs(op, input, mpfrIntResult,
                                                       precision, rounding);

  if (mpfrIntResult != libc_result.i) {
    tlog << "MPFR integral result: " << mpfrIntResult << '\n'
         << "Libc integral result: " << libc_result.i << '\n';
  } else {
    tlog << "Integral result from libc matches integral result from MPFR.\n";
  }

  MPFRNumber mpfrMatchValue(libc_result.f);
  tlog
      << "Libc floating point result is not within tolerance value of the MPFR "
      << "result.\n\n";

  tlog << "            Input decimal: " << mpfrInput.str() << "\n\n";

  tlog << "Libc floating point value: " << mpfrMatchValue.str() << '\n';
  tlog << " Libc floating point bits: " << str(FPBits<T>(libc_result.f))
       << '\n';
  tlog << "\n\n";

  tlog << "              MPFR result: " << mpfr_result.str() << '\n';
  tlog << "             MPFR rounded: " << str(FPBits<T>(mpfr_result.as<T>()))
       << '\n';
  tlog << '\n'
       << "                ULP error: "
       << mpfr_result.ulp_as_mpfr_number(libc_result.f).str() << '\n';
}

template void explain_unary_operation_two_outputs_error<float>(
    Operation, float, const BinaryOutput<float> &, double, RoundingMode);
template void explain_unary_operation_two_outputs_error<double>(
    Operation, double, const BinaryOutput<double> &, double, RoundingMode);
template void explain_unary_operation_two_outputs_error<long double>(
    Operation, long double, const BinaryOutput<long double> &, double,
    RoundingMode);

template <typename T>
void explain_binary_operation_two_outputs_error(
    Operation op, const BinaryInput<T> &input,
    const BinaryOutput<T> &libc_result, double ulp_tolerance,
    RoundingMode rounding) {
  unsigned int precision = get_precision<T>(ulp_tolerance);
  MPFRNumber mpfrX(input.x, precision);
  MPFRNumber mpfrY(input.y, precision);
  int mpfrIntResult;
  MPFRNumber mpfr_result = binary_operation_two_outputs(
      op, input.x, input.y, mpfrIntResult, precision, rounding);
  MPFRNumber mpfrMatchValue(libc_result.f);

  tlog << "Input decimal: x: " << mpfrX.str() << " y: " << mpfrY.str() << '\n'
       << "MPFR integral result: " << mpfrIntResult << '\n'
       << "Libc integral result: " << libc_result.i << '\n'
       << "Libc floating point result: " << mpfrMatchValue.str() << '\n'
       << "               MPFR result: " << mpfr_result.str() << '\n';
  tlog << "Libc floating point result bits: " << str(FPBits<T>(libc_result.f))
       << '\n';
  tlog << "              MPFR rounded bits: "
       << str(FPBits<T>(mpfr_result.as<T>())) << '\n';
  tlog << "ULP error: " << mpfr_result.ulp_as_mpfr_number(libc_result.f).str()
       << '\n';
}

template void explain_binary_operation_two_outputs_error<float>(
    Operation, const BinaryInput<float> &, const BinaryOutput<float> &, double,
    RoundingMode);
template void explain_binary_operation_two_outputs_error<double>(
    Operation, const BinaryInput<double> &, const BinaryOutput<double> &,
    double, RoundingMode);
template void explain_binary_operation_two_outputs_error<long double>(
    Operation, const BinaryInput<long double> &,
    const BinaryOutput<long double> &, double, RoundingMode);

template <typename InputType, typename OutputType>
void explain_binary_operation_one_output_error(
    Operation op, const BinaryInput<InputType> &input, OutputType libc_result,
    double ulp_tolerance, RoundingMode rounding) {
  unsigned int precision = get_precision<InputType>(ulp_tolerance);
  MPFRNumber mpfrX(input.x, precision);
  MPFRNumber mpfrY(input.y, precision);
  FPBits<InputType> xbits(input.x);
  FPBits<InputType> ybits(input.y);
  MPFRNumber mpfr_result =
      binary_operation_one_output(op, input.x, input.y, precision, rounding);
  MPFRNumber mpfrMatchValue(libc_result);

  tlog << "Input decimal: x: " << mpfrX.str() << " y: " << mpfrY.str() << '\n';
  tlog << "First input bits: " << str(FPBits<InputType>(input.x)) << '\n';
  tlog << "Second input bits: " << str(FPBits<InputType>(input.y)) << '\n';

  tlog << "Libc result: " << mpfrMatchValue.str() << '\n'
       << "MPFR result: " << mpfr_result.str() << '\n';
  tlog << "Libc floating point result bits: "
       << str(FPBits<OutputType>(libc_result)) << '\n';
  tlog << "              MPFR rounded bits: "
       << str(FPBits<OutputType>(mpfr_result.as<OutputType>())) << '\n';
  tlog << "ULP error: " << mpfr_result.ulp_as_mpfr_number(libc_result).str()
       << '\n';
}

template void
explain_binary_operation_one_output_error(Operation, const BinaryInput<float> &,
                                          float, double, RoundingMode);
template void explain_binary_operation_one_output_error(
    Operation, const BinaryInput<double> &, float, double, RoundingMode);
template void explain_binary_operation_one_output_error(
    Operation, const BinaryInput<double> &, double, double, RoundingMode);
template void explain_binary_operation_one_output_error(
    Operation, const BinaryInput<long double> &, float, double, RoundingMode);
template void explain_binary_operation_one_output_error(
    Operation, const BinaryInput<long double> &, double, double, RoundingMode);
template void
explain_binary_operation_one_output_error(Operation,
                                          const BinaryInput<long double> &,
                                          long double, double, RoundingMode);
#ifdef LIBC_TYPES_HAS_FLOAT16
template void explain_binary_operation_one_output_error(
    Operation, const BinaryInput<float16> &, float16, double, RoundingMode);
template void
explain_binary_operation_one_output_error(Operation, const BinaryInput<float> &,
                                          float16, double, RoundingMode);
template void explain_binary_operation_one_output_error(
    Operation, const BinaryInput<double> &, float16, double, RoundingMode);
template void explain_binary_operation_one_output_error(
    Operation, const BinaryInput<long double> &, float16, double, RoundingMode);
#endif

template <typename InputType, typename OutputType>
void explain_ternary_operation_one_output_error(
    Operation op, const TernaryInput<InputType> &input, OutputType libc_result,
    double ulp_tolerance, RoundingMode rounding) {
  unsigned int precision = get_precision<InputType>(ulp_tolerance);
  MPFRNumber mpfrX(input.x, precision);
  MPFRNumber mpfrY(input.y, precision);
  MPFRNumber mpfrZ(input.z, precision);
  FPBits<InputType> xbits(input.x);
  FPBits<InputType> ybits(input.y);
  FPBits<InputType> zbits(input.z);
  MPFRNumber mpfr_result = ternary_operation_one_output(
      op, input.x, input.y, input.z, precision, rounding);
  MPFRNumber mpfrMatchValue(libc_result);

  tlog << "Input decimal: x: " << mpfrX.str() << " y: " << mpfrY.str()
       << " z: " << mpfrZ.str() << '\n';
  tlog << " First input bits: " << str(FPBits<InputType>(input.x)) << '\n';
  tlog << "Second input bits: " << str(FPBits<InputType>(input.y)) << '\n';
  tlog << " Third input bits: " << str(FPBits<InputType>(input.z)) << '\n';

  tlog << "Libc result: " << mpfrMatchValue.str() << '\n'
       << "MPFR result: " << mpfr_result.str() << '\n';
  tlog << "Libc floating point result bits: "
       << str(FPBits<OutputType>(libc_result)) << '\n';
  tlog << "              MPFR rounded bits: "
       << str(FPBits<OutputType>(mpfr_result.as<OutputType>())) << '\n';
  tlog << "ULP error: " << mpfr_result.ulp_as_mpfr_number(libc_result).str()
       << '\n';
}

template void explain_ternary_operation_one_output_error(
    Operation, const TernaryInput<float> &, float, double, RoundingMode);
template void explain_ternary_operation_one_output_error(
    Operation, const TernaryInput<double> &, float, double, RoundingMode);
template void explain_ternary_operation_one_output_error(
    Operation, const TernaryInput<double> &, double, double, RoundingMode);
template void explain_ternary_operation_one_output_error(
    Operation, const TernaryInput<long double> &, float, double, RoundingMode);
template void explain_ternary_operation_one_output_error(
    Operation, const TernaryInput<long double> &, double, double, RoundingMode);
template void
explain_ternary_operation_one_output_error(Operation,
                                           const TernaryInput<long double> &,
                                           long double, double, RoundingMode);

#ifdef LIBC_TYPES_HAS_FLOAT16
template void explain_ternary_operation_one_output_error(
    Operation, const TernaryInput<float> &, float16, double, RoundingMode);
template void explain_ternary_operation_one_output_error(
    Operation, const TernaryInput<double> &, float16, double, RoundingMode);
template void
explain_ternary_operation_one_output_error(Operation,
                                           const TernaryInput<long double> &,
                                           float16, double, RoundingMode);
#endif

template <typename InputType, typename OutputType>
bool compare_unary_operation_single_output(Operation op, InputType input,
                                           OutputType libc_result,
                                           double ulp_tolerance,
                                           RoundingMode rounding) {
  unsigned int precision = get_precision<InputType>(ulp_tolerance);
  MPFRNumber mpfr_result;
  mpfr_result = unary_operation(op, input, precision, rounding);
  double ulp = mpfr_result.ulp(libc_result);
  return (ulp <= ulp_tolerance);
}

template bool compare_unary_operation_single_output(Operation, float, float,
                                                    double, RoundingMode);
template bool compare_unary_operation_single_output(Operation, double, double,
                                                    double, RoundingMode);
template bool compare_unary_operation_single_output(Operation, long double,
                                                    long double, double,
                                                    RoundingMode);
template bool compare_unary_operation_single_output(Operation, double, float,
                                                    double, RoundingMode);
template bool compare_unary_operation_single_output(Operation, long double,
                                                    float, double,
                                                    RoundingMode);
template bool compare_unary_operation_single_output(Operation, long double,
                                                    double, double,
                                                    RoundingMode);
#ifdef LIBC_TYPES_HAS_FLOAT16
template bool compare_unary_operation_single_output(Operation, float16, float16,
                                                    double, RoundingMode);
template bool compare_unary_operation_single_output(Operation, float, float16,
                                                    double, RoundingMode);
template bool compare_unary_operation_single_output(Operation, double, float16,
                                                    double, RoundingMode);
template bool compare_unary_operation_single_output(Operation, long double,
                                                    float16, double,
                                                    RoundingMode);
#ifdef LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE
template bool compare_unary_operation_single_output(Operation, float128,
                                                    float16, double,
                                                    RoundingMode);
#endif // LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE
#endif // LIBC_TYPES_HAS_FLOAT16

#ifdef LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE
template bool compare_unary_operation_single_output(Operation, float128,
                                                    float128, double,
                                                    RoundingMode);
template bool compare_unary_operation_single_output(Operation, float128, float,
                                                    double, RoundingMode);
template bool compare_unary_operation_single_output(Operation, float128, double,
                                                    double, RoundingMode);
template bool compare_unary_operation_single_output(Operation, float128,
                                                    long double, double,
                                                    RoundingMode);
#endif // LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE

template <typename T>
bool compare_unary_operation_two_outputs(Operation op, T input,
                                         const BinaryOutput<T> &libc_result,
                                         double ulp_tolerance,
                                         RoundingMode rounding) {
  int mpfrIntResult;
  unsigned int precision = get_precision<T>(ulp_tolerance);
  MPFRNumber mpfr_result = unary_operation_two_outputs(op, input, mpfrIntResult,
                                                       precision, rounding);
  double ulp = mpfr_result.ulp(libc_result.f);

  if (mpfrIntResult != libc_result.i)
    return false;

  return (ulp <= ulp_tolerance);
}

template bool compare_unary_operation_two_outputs<float>(
    Operation, float, const BinaryOutput<float> &, double, RoundingMode);
template bool compare_unary_operation_two_outputs<double>(
    Operation, double, const BinaryOutput<double> &, double, RoundingMode);
template bool compare_unary_operation_two_outputs<long double>(
    Operation, long double, const BinaryOutput<long double> &, double,
    RoundingMode);

template <typename T>
bool compare_binary_operation_two_outputs(Operation op,
                                          const BinaryInput<T> &input,
                                          const BinaryOutput<T> &libc_result,
                                          double ulp_tolerance,
                                          RoundingMode rounding) {
  int mpfrIntResult;
  unsigned int precision = get_precision<T>(ulp_tolerance);
  MPFRNumber mpfr_result = binary_operation_two_outputs(
      op, input.x, input.y, mpfrIntResult, precision, rounding);
  double ulp = mpfr_result.ulp(libc_result.f);

  if (mpfrIntResult != libc_result.i) {
    if (op == Operation::RemQuo) {
      if ((0x7 & mpfrIntResult) != (0x7 & libc_result.i))
        return false;
    } else {
      return false;
    }
  }

  return (ulp <= ulp_tolerance);
}

template bool compare_binary_operation_two_outputs<float>(
    Operation, const BinaryInput<float> &, const BinaryOutput<float> &, double,
    RoundingMode);
template bool compare_binary_operation_two_outputs<double>(
    Operation, const BinaryInput<double> &, const BinaryOutput<double> &,
    double, RoundingMode);
template bool compare_binary_operation_two_outputs<long double>(
    Operation, const BinaryInput<long double> &,
    const BinaryOutput<long double> &, double, RoundingMode);

template <typename InputType, typename OutputType>
bool compare_binary_operation_one_output(Operation op,
                                         const BinaryInput<InputType> &input,
                                         OutputType libc_result,
                                         double ulp_tolerance,
                                         RoundingMode rounding) {
  unsigned int precision = get_precision<InputType>(ulp_tolerance);
  MPFRNumber mpfr_result =
      binary_operation_one_output(op, input.x, input.y, precision, rounding);
  double ulp = mpfr_result.ulp(libc_result);

  return (ulp <= ulp_tolerance);
}

template bool compare_binary_operation_one_output(Operation,
                                                  const BinaryInput<float> &,
                                                  float, double, RoundingMode);
template bool compare_binary_operation_one_output(Operation,
                                                  const BinaryInput<double> &,
                                                  double, double, RoundingMode);
template bool
compare_binary_operation_one_output(Operation, const BinaryInput<long double> &,
                                    float, double, RoundingMode);
template bool
compare_binary_operation_one_output(Operation, const BinaryInput<long double> &,
                                    double, double, RoundingMode);
template bool
compare_binary_operation_one_output(Operation, const BinaryInput<long double> &,
                                    long double, double, RoundingMode);

template bool compare_binary_operation_one_output(Operation,
                                                  const BinaryInput<double> &,
                                                  float, double, RoundingMode);
#ifdef LIBC_TYPES_HAS_FLOAT16
template bool compare_binary_operation_one_output(Operation,
                                                  const BinaryInput<float16> &,
                                                  float16, double,
                                                  RoundingMode);
template bool compare_binary_operation_one_output(Operation,
                                                  const BinaryInput<float> &,
                                                  float16, double,
                                                  RoundingMode);
template bool compare_binary_operation_one_output(Operation,
                                                  const BinaryInput<double> &,
                                                  float16, double,
                                                  RoundingMode);
template bool
compare_binary_operation_one_output(Operation, const BinaryInput<long double> &,
                                    float16, double, RoundingMode);
#endif

template <typename InputType, typename OutputType>
bool compare_ternary_operation_one_output(Operation op,
                                          const TernaryInput<InputType> &input,
                                          OutputType libc_result,
                                          double ulp_tolerance,
                                          RoundingMode rounding) {
  unsigned int precision = get_precision<InputType>(ulp_tolerance);
  MPFRNumber mpfr_result = ternary_operation_one_output(
      op, input.x, input.y, input.z, precision, rounding);
  double ulp = mpfr_result.ulp(libc_result);

  return (ulp <= ulp_tolerance);
}

template bool compare_ternary_operation_one_output(Operation,
                                                   const TernaryInput<float> &,
                                                   float, double, RoundingMode);
template bool compare_ternary_operation_one_output(Operation,
                                                   const TernaryInput<double> &,
                                                   float, double, RoundingMode);
template bool compare_ternary_operation_one_output(Operation,
                                                   const TernaryInput<double> &,
                                                   double, double,
                                                   RoundingMode);
template bool compare_ternary_operation_one_output(
    Operation, const TernaryInput<long double> &, float, double, RoundingMode);
template bool compare_ternary_operation_one_output(
    Operation, const TernaryInput<long double> &, double, double, RoundingMode);
template bool
compare_ternary_operation_one_output(Operation,
                                     const TernaryInput<long double> &,
                                     long double, double, RoundingMode);

#ifdef LIBC_TYPES_HAS_FLOAT16
template bool compare_ternary_operation_one_output(Operation,
                                                   const TernaryInput<float> &,
                                                   float16, double,
                                                   RoundingMode);
template bool compare_ternary_operation_one_output(Operation,
                                                   const TernaryInput<double> &,
                                                   float16, double,
                                                   RoundingMode);
template bool
compare_ternary_operation_one_output(Operation,
                                     const TernaryInput<long double> &, float16,
                                     double, RoundingMode);
#endif

} // namespace internal

template <typename T> bool round_to_long(T x, long &result) {
  MPFRNumber mpfr(x);
  return mpfr.round_to_long(result);
}

template bool round_to_long<float>(float, long &);
template bool round_to_long<double>(double, long &);
template bool round_to_long<long double>(long double, long &);

#ifdef LIBC_TYPES_HAS_FLOAT16
template bool round_to_long<float16>(float16, long &);
#endif // LIBC_TYPES_HAS_FLOAT16

#ifdef LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE
template bool round_to_long<float128>(float128, long &);
#endif // LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE

template <typename T> bool round_to_long(T x, RoundingMode mode, long &result) {
  MPFRNumber mpfr(x);
  return mpfr.round_to_long(get_mpfr_rounding_mode(mode), result);
}

template bool round_to_long<float>(float, RoundingMode, long &);
template bool round_to_long<double>(double, RoundingMode, long &);
template bool round_to_long<long double>(long double, RoundingMode, long &);

#ifdef LIBC_TYPES_HAS_FLOAT16
template bool round_to_long<float16>(float16, RoundingMode, long &);
#endif // LIBC_TYPES_HAS_FLOAT16

#ifdef LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE
template bool round_to_long<float128>(float128, RoundingMode, long &);
#endif // LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE

template <typename T> T round(T x, RoundingMode mode) {
  MPFRNumber mpfr(x);
  MPFRNumber result = mpfr.rint(get_mpfr_rounding_mode(mode));
  return result.as<T>();
}

template float round<float>(float, RoundingMode);
template double round<double>(double, RoundingMode);
template long double round<long double>(long double, RoundingMode);

#ifdef LIBC_TYPES_HAS_FLOAT16
template float16 round<float16>(float16, RoundingMode);
#endif // LIBC_TYPES_HAS_FLOAT16

#ifdef LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE
template float128 round<float128>(float128, RoundingMode);
#endif // LIBC_TYPES_FLOAT128_IS_NOT_LONG_DOUBLE

} // namespace mpfr
} // namespace testing
} // namespace LIBC_NAMESPACE_DECL