| //===-- MachThread.cpp ------------------------------------------*- C++ -*-===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // Created by Greg Clayton on 6/19/07. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #include "MachThread.h" |
| #include "MachProcess.h" |
| #include "DNBLog.h" |
| #include "DNB.h" |
| |
| static uint32_t |
| GetSequenceID() |
| { |
| static uint32_t g_nextID = 0; |
| return ++g_nextID; |
| } |
| |
| MachThread::MachThread (MachProcess *process, thread_t tid) : |
| m_process (process), |
| m_tid (tid), |
| m_seq_id (GetSequenceID()), |
| m_state (eStateUnloaded), |
| m_state_mutex (PTHREAD_MUTEX_RECURSIVE), |
| m_break_id (INVALID_NUB_BREAK_ID), |
| m_suspend_count (0), |
| m_stop_exception (), |
| m_arch_ap (DNBArchProtocol::Create (this)), |
| m_reg_sets (NULL), |
| m_num_reg_sets (0) |
| #ifdef THREAD_IDENTIFIER_INFO_COUNT |
| , m_ident_info(), |
| m_proc_threadinfo(), |
| m_dispatch_queue_name() |
| #endif |
| { |
| nub_size_t num_reg_sets = 0; |
| m_reg_sets = m_arch_ap->GetRegisterSetInfo (&num_reg_sets); |
| m_num_reg_sets = num_reg_sets; |
| |
| // Get the thread state so we know if a thread is in a state where we can't |
| // muck with it and also so we get the suspend count correct in case it was |
| // already suspended |
| GetBasicInfo(); |
| DNBLogThreadedIf(LOG_THREAD | LOG_VERBOSE, "MachThread::MachThread ( process = %p, tid = 0x%4.4x, seq_id = %u )", &m_process, m_tid, m_seq_id); |
| } |
| |
| MachThread::~MachThread() |
| { |
| DNBLogThreadedIf(LOG_THREAD | LOG_VERBOSE, "MachThread::~MachThread() for tid = 0x%4.4x (%u)", m_tid, m_seq_id); |
| } |
| |
| |
| |
| void |
| MachThread::Suspend() |
| { |
| DNBLogThreadedIf(LOG_THREAD | LOG_VERBOSE, "MachThread::%s ( )", __FUNCTION__); |
| if (ThreadIDIsValid(m_tid)) |
| { |
| DNBError err(::thread_suspend (m_tid), DNBError::MachKernel); |
| if (err.Success()) |
| m_suspend_count++; |
| if (DNBLogCheckLogBit(LOG_THREAD) || err.Fail()) |
| err.LogThreaded("::thread_suspend (%4.4x)", m_tid); |
| } |
| } |
| |
| void |
| MachThread::Resume(bool others_stopped) |
| { |
| DNBLogThreadedIf(LOG_THREAD | LOG_VERBOSE, "MachThread::%s ( )", __FUNCTION__); |
| if (ThreadIDIsValid(m_tid)) |
| { |
| SetSuspendCountBeforeResume(others_stopped); |
| } |
| } |
| |
| bool |
| MachThread::SetSuspendCountBeforeResume(bool others_stopped) |
| { |
| DNBLogThreadedIf(LOG_THREAD | LOG_VERBOSE, "MachThread::%s ( )", __FUNCTION__); |
| DNBError err; |
| if (ThreadIDIsValid(m_tid) == false) |
| return false; |
| |
| size_t times_to_resume; |
| |
| if (others_stopped) |
| { |
| if (GetBasicInfo()) |
| { |
| times_to_resume = m_basic_info.suspend_count; |
| m_suspend_count = - (times_to_resume - m_suspend_count); |
| } |
| else |
| times_to_resume = 0; |
| } |
| else |
| { |
| times_to_resume = m_suspend_count; |
| m_suspend_count = 0; |
| } |
| |
| if (times_to_resume > 0) |
| { |
| while (times_to_resume > 0) |
| { |
| err = ::thread_resume (m_tid); |
| if (DNBLogCheckLogBit(LOG_THREAD) || err.Fail()) |
| err.LogThreaded("::thread_resume (%4.4x)", m_tid); |
| if (err.Success()) |
| --times_to_resume; |
| else |
| { |
| if (GetBasicInfo()) |
| times_to_resume = m_basic_info.suspend_count; |
| else |
| times_to_resume = 0; |
| } |
| } |
| } |
| return true; |
| } |
| |
| bool |
| MachThread::RestoreSuspendCountAfterStop () |
| { |
| DNBLogThreadedIf(LOG_THREAD | LOG_VERBOSE, "MachThread::%s ( )", __FUNCTION__); |
| DNBError err; |
| if (ThreadIDIsValid(m_tid) == false) |
| return false; |
| |
| if (m_suspend_count > 0) |
| { |
| while (m_suspend_count > 0) |
| { |
| err = ::thread_resume (m_tid); |
| if (DNBLogCheckLogBit(LOG_THREAD) || err.Fail()) |
| err.LogThreaded("::thread_resume (%4.4x)", m_tid); |
| if (err.Success()) |
| --m_suspend_count; |
| else |
| { |
| if (GetBasicInfo()) |
| m_suspend_count = m_basic_info.suspend_count; |
| else |
| m_suspend_count = 0; |
| return false; // ??? |
| } |
| } |
| } |
| else if (m_suspend_count < 0) |
| { |
| while (m_suspend_count < 0) |
| { |
| err = ::thread_suspend (m_tid); |
| if (err.Success()) |
| ++m_suspend_count; |
| if (DNBLogCheckLogBit(LOG_THREAD) || err.Fail()) |
| { |
| err.LogThreaded("::thread_suspend (%4.4x)", m_tid); |
| return false; |
| } |
| } |
| } |
| return true; |
| } |
| |
| |
| const char * |
| MachThread::GetBasicInfoAsString () const |
| { |
| static char g_basic_info_string[1024]; |
| struct thread_basic_info basicInfo; |
| |
| if (GetBasicInfo(m_tid, &basicInfo)) |
| { |
| |
| // char run_state_str[32]; |
| // size_t run_state_str_size = sizeof(run_state_str); |
| // switch (basicInfo.run_state) |
| // { |
| // case TH_STATE_RUNNING: strncpy(run_state_str, "running", run_state_str_size); break; |
| // case TH_STATE_STOPPED: strncpy(run_state_str, "stopped", run_state_str_size); break; |
| // case TH_STATE_WAITING: strncpy(run_state_str, "waiting", run_state_str_size); break; |
| // case TH_STATE_UNINTERRUPTIBLE: strncpy(run_state_str, "uninterruptible", run_state_str_size); break; |
| // case TH_STATE_HALTED: strncpy(run_state_str, "halted", run_state_str_size); break; |
| // default: snprintf(run_state_str, run_state_str_size, "%d", basicInfo.run_state); break; // ??? |
| // } |
| float user = (float)basicInfo.user_time.seconds + (float)basicInfo.user_time.microseconds / 1000000.0f; |
| float system = (float)basicInfo.user_time.seconds + (float)basicInfo.user_time.microseconds / 1000000.0f; |
| snprintf(g_basic_info_string, sizeof(g_basic_info_string), "Thread 0x%4.4x: user=%f system=%f cpu=%d sleep_time=%d", |
| InferiorThreadID(), |
| user, |
| system, |
| basicInfo.cpu_usage, |
| basicInfo.sleep_time); |
| |
| return g_basic_info_string; |
| } |
| return NULL; |
| } |
| |
| thread_t |
| MachThread::InferiorThreadID() const |
| { |
| mach_msg_type_number_t i; |
| mach_port_name_array_t names; |
| mach_port_type_array_t types; |
| mach_msg_type_number_t ncount, tcount; |
| thread_t inferior_tid = INVALID_NUB_THREAD; |
| task_t my_task = ::mach_task_self(); |
| task_t task = m_process->Task().TaskPort(); |
| |
| kern_return_t kret = ::mach_port_names (task, &names, &ncount, &types, &tcount); |
| if (kret == KERN_SUCCESS) |
| { |
| |
| for (i = 0; i < ncount; i++) |
| { |
| mach_port_t my_name; |
| mach_msg_type_name_t my_type; |
| |
| kret = ::mach_port_extract_right (task, names[i], MACH_MSG_TYPE_COPY_SEND, &my_name, &my_type); |
| if (kret == KERN_SUCCESS) |
| { |
| ::mach_port_deallocate (my_task, my_name); |
| if (my_name == m_tid) |
| { |
| inferior_tid = names[i]; |
| break; |
| } |
| } |
| } |
| // Free up the names and types |
| ::vm_deallocate (my_task, (vm_address_t) names, ncount * sizeof (mach_port_name_t)); |
| ::vm_deallocate (my_task, (vm_address_t) types, tcount * sizeof (mach_port_type_t)); |
| } |
| return inferior_tid; |
| } |
| |
| bool |
| MachThread::IsUserReady() |
| { |
| if (m_basic_info.run_state == 0) |
| GetBasicInfo (); |
| |
| switch (m_basic_info.run_state) |
| { |
| default: |
| case TH_STATE_UNINTERRUPTIBLE: |
| break; |
| |
| case TH_STATE_RUNNING: |
| case TH_STATE_STOPPED: |
| case TH_STATE_WAITING: |
| case TH_STATE_HALTED: |
| return true; |
| } |
| return false; |
| } |
| |
| struct thread_basic_info * |
| MachThread::GetBasicInfo () |
| { |
| if (MachThread::GetBasicInfo(m_tid, &m_basic_info)) |
| return &m_basic_info; |
| return NULL; |
| } |
| |
| |
| bool |
| MachThread::GetBasicInfo(thread_t thread, struct thread_basic_info *basicInfoPtr) |
| { |
| if (ThreadIDIsValid(thread)) |
| { |
| unsigned int info_count = THREAD_BASIC_INFO_COUNT; |
| kern_return_t err = ::thread_info (thread, THREAD_BASIC_INFO, (thread_info_t) basicInfoPtr, &info_count); |
| if (err == KERN_SUCCESS) |
| return true; |
| } |
| ::memset (basicInfoPtr, 0, sizeof (struct thread_basic_info)); |
| return false; |
| } |
| |
| |
| bool |
| MachThread::ThreadIDIsValid(thread_t thread) |
| { |
| return thread != THREAD_NULL; |
| } |
| |
| bool |
| MachThread::GetRegisterState(int flavor, bool force) |
| { |
| return m_arch_ap->GetRegisterState(flavor, force) == KERN_SUCCESS; |
| } |
| |
| bool |
| MachThread::SetRegisterState(int flavor) |
| { |
| return m_arch_ap->SetRegisterState(flavor) == KERN_SUCCESS; |
| } |
| |
| uint64_t |
| MachThread::GetPC(uint64_t failValue) |
| { |
| // Get program counter |
| return m_arch_ap->GetPC(failValue); |
| } |
| |
| bool |
| MachThread::SetPC(uint64_t value) |
| { |
| // Set program counter |
| return m_arch_ap->SetPC(value); |
| } |
| |
| uint64_t |
| MachThread::GetSP(uint64_t failValue) |
| { |
| // Get stack pointer |
| return m_arch_ap->GetSP(failValue); |
| } |
| |
| nub_process_t |
| MachThread::ProcessID() const |
| { |
| if (m_process) |
| return m_process->ProcessID(); |
| return INVALID_NUB_PROCESS; |
| } |
| |
| void |
| MachThread::Dump(uint32_t index) |
| { |
| const char * thread_run_state = NULL; |
| |
| switch (m_basic_info.run_state) |
| { |
| case TH_STATE_RUNNING: thread_run_state = "running"; break; // 1 thread is running normally |
| case TH_STATE_STOPPED: thread_run_state = "stopped"; break; // 2 thread is stopped |
| case TH_STATE_WAITING: thread_run_state = "waiting"; break; // 3 thread is waiting normally |
| case TH_STATE_UNINTERRUPTIBLE: thread_run_state = "uninter"; break; // 4 thread is in an uninterruptible wait |
| case TH_STATE_HALTED: thread_run_state = "halted "; break; // 5 thread is halted at a |
| default: thread_run_state = "???"; break; |
| } |
| |
| DNBLogThreaded("[%3u] #%3u tid: 0x%4.4x, pc: 0x%16.16llx, sp: 0x%16.16llx, breakID: %3d, user: %d.%6.6d, system: %d.%6.6d, cpu: %2d, policy: %2d, run_state: %2d (%s), flags: %2d, suspend_count: %2d (current %2d), sleep_time: %d", |
| index, |
| m_seq_id, |
| m_tid, |
| GetPC(INVALID_NUB_ADDRESS), |
| GetSP(INVALID_NUB_ADDRESS), |
| m_break_id, |
| m_basic_info.user_time.seconds, m_basic_info.user_time.microseconds, |
| m_basic_info.system_time.seconds, m_basic_info.system_time.microseconds, |
| m_basic_info.cpu_usage, |
| m_basic_info.policy, |
| m_basic_info.run_state, |
| thread_run_state, |
| m_basic_info.flags, |
| m_basic_info.suspend_count, m_suspend_count, |
| m_basic_info.sleep_time); |
| //DumpRegisterState(0); |
| } |
| |
| void |
| MachThread::ThreadWillResume(const DNBThreadResumeAction *thread_action, bool others_stopped) |
| { |
| if (thread_action->addr != INVALID_NUB_ADDRESS) |
| SetPC (thread_action->addr); |
| |
| SetState (thread_action->state); |
| switch (thread_action->state) |
| { |
| case eStateStopped: |
| case eStateSuspended: |
| assert (others_stopped == false); |
| Suspend(); |
| break; |
| |
| case eStateRunning: |
| case eStateStepping: |
| Resume(others_stopped); |
| break; |
| default: |
| break; |
| } |
| m_arch_ap->ThreadWillResume(); |
| m_stop_exception.Clear(); |
| } |
| |
| nub_break_t |
| MachThread::CurrentBreakpoint() |
| { |
| return m_process->Breakpoints().FindIDByAddress(GetPC()); |
| } |
| |
| bool |
| MachThread::ShouldStop(bool &step_more) |
| { |
| // See if this thread is at a breakpoint? |
| nub_break_t breakID = CurrentBreakpoint(); |
| |
| if (NUB_BREAK_ID_IS_VALID(breakID)) |
| { |
| // This thread is sitting at a breakpoint, ask the breakpoint |
| // if we should be stopping here. |
| if (Process()->Breakpoints().ShouldStop(ProcessID(), ThreadID(), breakID)) |
| return true; |
| else |
| { |
| // The breakpoint said we shouldn't stop, but we may have gotten |
| // a signal or the user may have requested to stop in some other |
| // way. Stop if we have a valid exception (this thread won't if |
| // another thread was the reason this process stopped) and that |
| // exception, is NOT a breakpoint exception (a common case would |
| // be a SIGINT signal). |
| if (GetStopException().IsValid() && !GetStopException().IsBreakpoint()) |
| return true; |
| } |
| } |
| else |
| { |
| if (m_arch_ap->StepNotComplete()) |
| { |
| step_more = true; |
| return false; |
| } |
| // The thread state is used to let us know what the thread was |
| // trying to do. MachThread::ThreadWillResume() will set the |
| // thread state to various values depending if the thread was |
| // the current thread and if it was to be single stepped, or |
| // resumed. |
| if (GetState() == eStateRunning) |
| { |
| // If our state is running, then we should continue as we are in |
| // the process of stepping over a breakpoint. |
| return false; |
| } |
| else |
| { |
| // Stop if we have any kind of valid exception for this |
| // thread. |
| if (GetStopException().IsValid()) |
| return true; |
| } |
| } |
| return false; |
| } |
| bool |
| MachThread::IsStepping() |
| { |
| #if ENABLE_AUTO_STEPPING_OVER_BP |
| // Return true if this thread is currently being stepped. |
| // MachThread::ThreadWillResume currently determines this by looking if we |
| // have been asked to single step, or if we are at a breakpoint instruction |
| // and have been asked to resume. In the latter case we need to disable the |
| // breakpoint we are at, single step, re-enable and continue. |
| nub_state_t state = GetState(); |
| return ((state == eStateStepping) || |
| (state == eStateRunning && NUB_BREAK_ID_IS_VALID(CurrentBreakpoint()))); |
| #else |
| return GetState() == eStateStepping; |
| #endif |
| } |
| |
| |
| bool |
| MachThread::ThreadDidStop() |
| { |
| // This thread has existed prior to resuming under debug nub control, |
| // and has just been stopped. Do any cleanup that needs to be done |
| // after running. |
| |
| // The thread state and breakpoint will still have the same values |
| // as they had prior to resuming the thread, so it makes it easy to check |
| // if we were trying to step a thread, or we tried to resume while being |
| // at a breakpoint. |
| |
| // When this method gets called, the process state is still in the |
| // state it was in while running so we can act accordingly. |
| m_arch_ap->ThreadDidStop(); |
| |
| |
| // We may have suspended this thread so the primary thread could step |
| // without worrying about race conditions, so lets restore our suspend |
| // count. |
| RestoreSuspendCountAfterStop(); |
| |
| // Update the basic information for a thread |
| MachThread::GetBasicInfo(m_tid, &m_basic_info); |
| |
| #if ENABLE_AUTO_STEPPING_OVER_BP |
| // See if we were at a breakpoint when we last resumed that we disabled, |
| // re-enable it. |
| nub_break_t breakID = CurrentBreakpoint(); |
| |
| if (NUB_BREAK_ID_IS_VALID(breakID)) |
| { |
| m_process->EnableBreakpoint(breakID); |
| if (m_basic_info.suspend_count > 0) |
| { |
| SetState(eStateSuspended); |
| } |
| else |
| { |
| // If we last were at a breakpoint and we single stepped, our state |
| // will be "running" to indicate we need to continue after stepping |
| // over the breakpoint instruction. If we step over a breakpoint |
| // instruction, we need to stop. |
| if (GetState() == eStateRunning) |
| { |
| // Leave state set to running so we will continue automatically |
| // from this breakpoint |
| } |
| else |
| { |
| SetState(eStateStopped); |
| } |
| } |
| } |
| else |
| { |
| if (m_basic_info.suspend_count > 0) |
| { |
| SetState(eStateSuspended); |
| } |
| else |
| { |
| SetState(eStateStopped); |
| } |
| } |
| #else |
| if (m_basic_info.suspend_count > 0) |
| SetState(eStateSuspended); |
| else |
| SetState(eStateStopped); |
| #endif |
| return true; |
| } |
| |
| bool |
| MachThread::NotifyException(MachException::Data& exc) |
| { |
| // Allow the arch specific protocol to process (MachException::Data &)exc |
| // first before possible reassignment of m_stop_exception with exc. |
| // See also MachThread::GetStopException(). |
| bool handled = m_arch_ap->NotifyException(exc); |
| |
| if (m_stop_exception.IsValid()) |
| { |
| // We may have more than one exception for a thread, but we need to |
| // only remember the one that we will say is the reason we stopped. |
| // We may have been single stepping and also gotten a signal exception, |
| // so just remember the most pertinent one. |
| if (m_stop_exception.IsBreakpoint()) |
| m_stop_exception = exc; |
| } |
| else |
| { |
| m_stop_exception = exc; |
| } |
| |
| return handled; |
| } |
| |
| |
| nub_state_t |
| MachThread::GetState() |
| { |
| // If any other threads access this we will need a mutex for it |
| PTHREAD_MUTEX_LOCKER (locker, m_state_mutex); |
| return m_state; |
| } |
| |
| void |
| MachThread::SetState(nub_state_t state) |
| { |
| PTHREAD_MUTEX_LOCKER (locker, m_state_mutex); |
| m_state = state; |
| DNBLogThreadedIf(LOG_THREAD, "MachThread::SetState ( %s ) for tid = 0x%4.4x", DNBStateAsString(state), m_tid); |
| } |
| |
| uint32_t |
| MachThread::GetNumRegistersInSet(int regSet) const |
| { |
| if (regSet < m_num_reg_sets) |
| return m_reg_sets[regSet].num_registers; |
| return 0; |
| } |
| |
| const char * |
| MachThread::GetRegisterSetName(int regSet) const |
| { |
| if (regSet < m_num_reg_sets) |
| return m_reg_sets[regSet].name; |
| return NULL; |
| } |
| |
| const DNBRegisterInfo * |
| MachThread::GetRegisterInfo(int regSet, int regIndex) const |
| { |
| if (regSet < m_num_reg_sets) |
| if (regIndex < m_reg_sets[regSet].num_registers) |
| return &m_reg_sets[regSet].registers[regIndex]; |
| return NULL; |
| } |
| void |
| MachThread::DumpRegisterState(int regSet) |
| { |
| if (regSet == REGISTER_SET_ALL) |
| { |
| for (regSet = 1; regSet < m_num_reg_sets; regSet++) |
| DumpRegisterState(regSet); |
| } |
| else |
| { |
| if (m_arch_ap->RegisterSetStateIsValid(regSet)) |
| { |
| const size_t numRegisters = GetNumRegistersInSet(regSet); |
| size_t regIndex = 0; |
| DNBRegisterValueClass reg; |
| for (regIndex = 0; regIndex < numRegisters; ++regIndex) |
| { |
| if (m_arch_ap->GetRegisterValue(regSet, regIndex, ®)) |
| { |
| reg.Dump(NULL, NULL); |
| } |
| } |
| } |
| else |
| { |
| DNBLog("%s: registers are not currently valid.", GetRegisterSetName(regSet)); |
| } |
| } |
| } |
| |
| const DNBRegisterSetInfo * |
| MachThread::GetRegisterSetInfo(nub_size_t *num_reg_sets ) const |
| { |
| *num_reg_sets = m_num_reg_sets; |
| return &m_reg_sets[0]; |
| } |
| |
| bool |
| MachThread::GetRegisterValue ( uint32_t set, uint32_t reg, DNBRegisterValue *value ) |
| { |
| return m_arch_ap->GetRegisterValue(set, reg, value); |
| } |
| |
| bool |
| MachThread::SetRegisterValue ( uint32_t set, uint32_t reg, const DNBRegisterValue *value ) |
| { |
| return m_arch_ap->SetRegisterValue(set, reg, value); |
| } |
| |
| nub_size_t |
| MachThread::GetRegisterContext (void *buf, nub_size_t buf_len) |
| { |
| return m_arch_ap->GetRegisterContext(buf, buf_len); |
| } |
| |
| nub_size_t |
| MachThread::SetRegisterContext (const void *buf, nub_size_t buf_len) |
| { |
| return m_arch_ap->SetRegisterContext(buf, buf_len); |
| } |
| |
| uint32_t |
| MachThread::EnableHardwareBreakpoint (const DNBBreakpoint *bp) |
| { |
| if (bp != NULL && bp->IsBreakpoint()) |
| return m_arch_ap->EnableHardwareBreakpoint(bp->Address(), bp->ByteSize()); |
| return INVALID_NUB_HW_INDEX; |
| } |
| |
| uint32_t |
| MachThread::EnableHardwareWatchpoint (const DNBBreakpoint *wp) |
| { |
| if (wp != NULL && wp->IsWatchpoint()) |
| return m_arch_ap->EnableHardwareWatchpoint(wp->Address(), wp->ByteSize(), wp->WatchpointRead(), wp->WatchpointWrite()); |
| return INVALID_NUB_HW_INDEX; |
| } |
| |
| // Provide a chance to update the global view of the hardware watchpoint state. |
| void |
| MachThread::HardwareWatchpointStateChanged () |
| { |
| m_arch_ap->HardwareWatchpointStateChanged(); |
| } |
| |
| bool |
| MachThread::DisableHardwareBreakpoint (const DNBBreakpoint *bp) |
| { |
| if (bp != NULL && bp->IsHardware()) |
| return m_arch_ap->DisableHardwareBreakpoint(bp->GetHardwareIndex()); |
| return false; |
| } |
| |
| bool |
| MachThread::DisableHardwareWatchpoint (const DNBBreakpoint *wp) |
| { |
| if (wp != NULL && wp->IsHardware()) |
| return m_arch_ap->DisableHardwareWatchpoint(wp->GetHardwareIndex()); |
| return false; |
| } |
| |
| bool |
| MachThread::GetIdentifierInfo () |
| { |
| #ifdef THREAD_IDENTIFIER_INFO_COUNT |
| // Don't try to get the thread info once and cache it for the life of the thread. It changes over time, for instance |
| // if the thread name changes, then the thread_handle also changes... So you have to refetch it every time. |
| mach_msg_type_number_t count = THREAD_IDENTIFIER_INFO_COUNT; |
| kern_return_t kret = ::thread_info (ThreadID(), THREAD_IDENTIFIER_INFO, (thread_info_t) &m_ident_info, &count); |
| return kret == KERN_SUCCESS; |
| #endif |
| |
| return false; |
| } |
| |
| |
| const char * |
| MachThread::GetName () |
| { |
| if (GetIdentifierInfo ()) |
| { |
| int len = ::proc_pidinfo (m_process->ProcessID(), PROC_PIDTHREADINFO, m_ident_info.thread_handle, &m_proc_threadinfo, sizeof (m_proc_threadinfo)); |
| |
| if (len && m_proc_threadinfo.pth_name[0]) |
| return m_proc_threadinfo.pth_name; |
| } |
| return NULL; |
| } |
| |
