| //===-- CaymanInstructions.td - CM Instruction defs -------*- tablegen -*-===// |
| // |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. |
| // See https://llvm.org/LICENSE.txt for license information. |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // TableGen definitions for instructions which are available only on Cayman |
| // family GPUs. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| def isCayman : Predicate<"Subtarget->hasCaymanISA()">; |
| |
| //===----------------------------------------------------------------------===// |
| // Cayman Instructions |
| //===----------------------------------------------------------------------===// |
| |
| let SubtargetPredicate = isCayman in { |
| |
| def MULADD_INT24_cm : R600_3OP <0x08, "MULADD_INT24", |
| [(set i32:$dst, (AMDGPUmad_i24 i32:$src0, i32:$src1, i32:$src2))], VecALU |
| >; |
| def MUL_INT24_cm : R600_2OP <0x5B, "MUL_INT24", |
| [(set i32:$dst, (AMDGPUmul_i24 i32:$src0, i32:$src1))], VecALU |
| >; |
| |
| def : IMad24Pat<MULADD_INT24_cm>; |
| |
| let isVector = 1 in { |
| |
| def RECIP_IEEE_cm : RECIP_IEEE_Common<0x86>; |
| |
| def MULLO_INT_cm : MULLO_INT_Common<0x8F>; |
| def MULHI_INT_cm : MULHI_INT_Common<0x90>; |
| def MULLO_UINT_cm : MULLO_UINT_Common<0x91>; |
| def MULHI_UINT_cm : MULHI_UINT_Common<0x92>; |
| def MULHI_INT_cm24 : MULHI_INT24_Common<0x5c>; |
| def MULHI_UINT_cm24 : MULHI_UINT24_Common<0xb2>; |
| |
| def RECIPSQRT_CLAMPED_cm : RECIPSQRT_CLAMPED_Common<0x87>; |
| def EXP_IEEE_cm : EXP_IEEE_Common<0x81>; |
| def LOG_IEEE_cm : LOG_IEEE_Common<0x83>; |
| def RECIP_CLAMPED_cm : RECIP_CLAMPED_Common<0x84>; |
| def RECIPSQRT_IEEE_cm : RECIPSQRT_IEEE_Common<0x89>; |
| def SIN_cm : SIN_Common<0x8D>; |
| def COS_cm : COS_Common<0x8E>; |
| } // End isVector = 1 |
| |
| def : SqrtPat<RECIPSQRT_IEEE_cm, RECIP_IEEE_cm>; |
| |
| def : POW_Common <LOG_IEEE_cm, EXP_IEEE_cm, MUL>; |
| |
| defm DIV_cm : DIV_Common<RECIP_IEEE_cm>; |
| |
| // RECIP_UINT emulation for Cayman |
| // The multiplication scales from [0,1) to the unsigned integer range, |
| // rounding down a bit to avoid unwanted overflow. |
| def : R600Pat < |
| (AMDGPUurecip i32:$src0), |
| (FLT_TO_UINT_eg (MUL_IEEE (RECIP_IEEE_cm (UINT_TO_FLT_eg $src0)), |
| (MOV_IMM_I32 CONST.FP_4294966784))) |
| >; |
| |
| def CF_END_CM : CF_CLAUSE_EG<32, (ins), "CF_END"> { |
| let ADDR = 0; |
| let POP_COUNT = 0; |
| let COUNT = 0; |
| } |
| |
| |
| |
| class RAT_STORE_DWORD <RegisterClass rc, ValueType vt, bits<4> mask> : |
| CF_MEM_RAT_CACHELESS <0x14, 0, mask, |
| (ins rc:$rw_gpr, R600_TReg32_X:$index_gpr), |
| "STORE_DWORD $rw_gpr, $index_gpr", |
| [(store_global vt:$rw_gpr, i32:$index_gpr)]> { |
| let eop = 0; // This bit is not used on Cayman. |
| } |
| |
| def RAT_STORE_DWORD32 : RAT_STORE_DWORD <R600_TReg32_X, i32, 0x1>; |
| def RAT_STORE_DWORD64 : RAT_STORE_DWORD <R600_Reg64, v2i32, 0x3>; |
| def RAT_STORE_DWORD128 : RAT_STORE_DWORD <R600_Reg128, v4i32, 0xf>; |
| |
| def RAT_STORE_TYPED_cm: CF_MEM_RAT_STORE_TYPED<0> { |
| let eop = 0; // This bit is not used on Cayman. |
| } |
| |
| class VTX_READ_cm <string name, dag outs> |
| : VTX_WORD0_cm, VTX_READ<name, outs, []> { |
| |
| // Static fields |
| let VC_INST = 0; |
| let FETCH_TYPE = 2; |
| let FETCH_WHOLE_QUAD = 0; |
| let SRC_REL = 0; |
| // XXX: We can infer this field based on the SRC_GPR. This would allow us |
| // to store vertex addresses in any channel, not just X. |
| let SRC_SEL_X = 0; |
| let SRC_SEL_Y = 0; |
| let STRUCTURED_READ = 0; |
| let LDS_REQ = 0; |
| let COALESCED_READ = 0; |
| |
| let Inst{31-0} = Word0; |
| } |
| |
| def VTX_READ_8_cm |
| : VTX_READ_cm <"VTX_READ_8 $dst_gpr, $src_gpr", |
| (outs R600_TReg32_X:$dst_gpr)> { |
| |
| let DST_SEL_X = 0; |
| let DST_SEL_Y = 7; // Masked |
| let DST_SEL_Z = 7; // Masked |
| let DST_SEL_W = 7; // Masked |
| let DATA_FORMAT = 1; // FMT_8 |
| } |
| |
| def VTX_READ_16_cm |
| : VTX_READ_cm <"VTX_READ_16 $dst_gpr, $src_gpr", |
| (outs R600_TReg32_X:$dst_gpr)> { |
| let DST_SEL_X = 0; |
| let DST_SEL_Y = 7; // Masked |
| let DST_SEL_Z = 7; // Masked |
| let DST_SEL_W = 7; // Masked |
| let DATA_FORMAT = 5; // FMT_16 |
| |
| } |
| |
| def VTX_READ_32_cm |
| : VTX_READ_cm <"VTX_READ_32 $dst_gpr, $src_gpr", |
| (outs R600_TReg32_X:$dst_gpr)> { |
| |
| let DST_SEL_X = 0; |
| let DST_SEL_Y = 7; // Masked |
| let DST_SEL_Z = 7; // Masked |
| let DST_SEL_W = 7; // Masked |
| let DATA_FORMAT = 0xD; // COLOR_32 |
| |
| // This is not really necessary, but there were some GPU hangs that appeared |
| // to be caused by ALU instructions in the next instruction group that wrote |
| // to the $src_gpr registers of the VTX_READ. |
| // e.g. |
| // %t3_x = VTX_READ_PARAM_32_eg killed %t2_x, 24 |
| // %t2_x = MOV %zero |
| //Adding this constraint prevents this from happening. |
| let Constraints = "$src_gpr.ptr = $dst_gpr"; |
| } |
| |
| def VTX_READ_64_cm |
| : VTX_READ_cm <"VTX_READ_64 $dst_gpr.XY, $src_gpr", |
| (outs R600_Reg64:$dst_gpr)> { |
| |
| let DST_SEL_X = 0; |
| let DST_SEL_Y = 1; |
| let DST_SEL_Z = 7; |
| let DST_SEL_W = 7; |
| let DATA_FORMAT = 0x1D; // COLOR_32_32 |
| } |
| |
| def VTX_READ_128_cm |
| : VTX_READ_cm <"VTX_READ_128 $dst_gpr.XYZW, $src_gpr", |
| (outs R600_Reg128:$dst_gpr)> { |
| |
| let DST_SEL_X = 0; |
| let DST_SEL_Y = 1; |
| let DST_SEL_Z = 2; |
| let DST_SEL_W = 3; |
| let DATA_FORMAT = 0x22; // COLOR_32_32_32_32 |
| |
| // XXX: Need to force VTX_READ_128 instructions to write to the same register |
| // that holds its buffer address to avoid potential hangs. We can't use |
| // the same constraint as VTX_READ_32_eg, because the $src_gpr.ptr and $dst |
| // registers are different sizes. |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // VTX Read from parameter memory space |
| //===----------------------------------------------------------------------===// |
| def : R600Pat<(i32:$dst_gpr (vtx_id3_az_extloadi8 ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_8_cm MEMxi:$src_gpr, 3)>; |
| def : R600Pat<(i32:$dst_gpr (vtx_id3_az_extloadi16 ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_16_cm MEMxi:$src_gpr, 3)>; |
| def : R600Pat<(i32:$dst_gpr (vtx_id3_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_32_cm MEMxi:$src_gpr, 3)>; |
| def : R600Pat<(v2i32:$dst_gpr (vtx_id3_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_64_cm MEMxi:$src_gpr, 3)>; |
| def : R600Pat<(v4i32:$dst_gpr (vtx_id3_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_128_cm MEMxi:$src_gpr, 3)>; |
| |
| //===----------------------------------------------------------------------===// |
| // VTX Read from constant memory space |
| //===----------------------------------------------------------------------===// |
| def : R600Pat<(i32:$dst_gpr (vtx_id2_az_extloadi8 ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_8_cm MEMxi:$src_gpr, 2)>; |
| def : R600Pat<(i32:$dst_gpr (vtx_id2_az_extloadi16 ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_16_cm MEMxi:$src_gpr, 2)>; |
| def : R600Pat<(i32:$dst_gpr (vtx_id2_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_32_cm MEMxi:$src_gpr, 2)>; |
| def : R600Pat<(v2i32:$dst_gpr (vtx_id2_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_64_cm MEMxi:$src_gpr, 2)>; |
| def : R600Pat<(v4i32:$dst_gpr (vtx_id2_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_128_cm MEMxi:$src_gpr, 2)>; |
| |
| //===----------------------------------------------------------------------===// |
| // VTX Read from global memory space |
| //===----------------------------------------------------------------------===// |
| def : R600Pat<(i32:$dst_gpr (vtx_id1_az_extloadi8 ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_8_cm MEMxi:$src_gpr, 1)>; |
| def : R600Pat<(i32:$dst_gpr (vtx_id1_az_extloadi16 ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_16_cm MEMxi:$src_gpr, 1)>; |
| def : R600Pat<(i32:$dst_gpr (vtx_id1_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_32_cm MEMxi:$src_gpr, 1)>; |
| def : R600Pat<(v2i32:$dst_gpr (vtx_id1_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_64_cm MEMxi:$src_gpr, 1)>; |
| def : R600Pat<(v4i32:$dst_gpr (vtx_id1_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_128_cm MEMxi:$src_gpr, 1)>; |
| |
| } // End let SubtargetPredicate = isCayman |