| -- CXG2017.A |
| -- |
| -- Grant of Unlimited Rights |
| -- |
| -- Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687, |
| -- F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained |
| -- unlimited rights in the software and documentation contained herein. |
| -- Unlimited rights are defined in DFAR 252.227-7013(a)(19). By making |
| -- this public release, the Government intends to confer upon all |
| -- recipients unlimited rights equal to those held by the Government. |
| -- These rights include rights to use, duplicate, release or disclose the |
| -- released technical data and computer software in whole or in part, in |
| -- any manner and for any purpose whatsoever, and to have or permit others |
| -- to do so. |
| -- |
| -- DISCLAIMER |
| -- |
| -- ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR |
| -- DISCLOSED ARE AS IS. THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED |
| -- WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE |
| -- SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE |
| -- OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A |
| -- PARTICULAR PURPOSE OF SAID MATERIAL. |
| --* |
| -- |
| -- OBJECTIVE: |
| -- Check that the TANH function returns |
| -- a result that is within the error bound allowed. |
| -- |
| -- TEST DESCRIPTION: |
| -- This test consists of a generic package that is |
| -- instantiated to check both Float and a long float type. |
| -- The test for each floating point type is divided into |
| -- several parts: |
| -- Special value checks where the result is a known constant. |
| -- Checks that use an identity for determining the result. |
| -- |
| -- SPECIAL REQUIREMENTS |
| -- The Strict Mode for the numerical accuracy must be |
| -- selected. The method by which this mode is selected |
| -- is implementation dependent. |
| -- |
| -- APPLICABILITY CRITERIA: |
| -- This test applies only to implementations supporting the |
| -- Numerics Annex. |
| -- This test only applies to the Strict Mode for numerical |
| -- accuracy. |
| -- |
| -- |
| -- CHANGE HISTORY: |
| -- 20 Mar 96 SAIC Initial release for 2.1 |
| -- 17 Aug 96 SAIC Incorporated reviewer comments. |
| -- 03 Jun 98 EDS Add parens to remove the potential for overflow. |
| -- Remove the invocation of Identity_Test that checks |
| -- Tanh values that are too close to zero for the |
| -- test's error bounds. |
| --! |
| |
| -- |
| -- References: |
| -- |
| -- Software Manual for the Elementary Functions |
| -- William J. Cody, Jr. and William Waite |
| -- Prentice-Hall, 1980 |
| -- |
| -- CRC Standard Mathematical Tables |
| -- 23rd Edition |
| -- |
| -- Implementation and Testing of Function Software |
| -- W. J. Cody |
| -- Problems and Methodologies in Mathematical Software Production |
| -- editors P. C. Messina and A. Murli |
| -- Lecture Notes in Computer Science Volume 142 |
| -- Springer Verlag, 1982 |
| -- |
| |
| with System; |
| with Report; |
| with Ada.Numerics.Generic_Elementary_Functions; |
| procedure CXG2017 is |
| Verbose : constant Boolean := False; |
| Max_Samples : constant := 1000; |
| |
| E : constant := Ada.Numerics.E; |
| |
| generic |
| type Real is digits <>; |
| package Generic_Check is |
| procedure Do_Test; |
| end Generic_Check; |
| |
| package body Generic_Check is |
| package Elementary_Functions is new |
| Ada.Numerics.Generic_Elementary_Functions (Real); |
| |
| function Tanh (X : Real) return Real renames |
| Elementary_Functions.Tanh; |
| |
| function Log (X : Real) return Real renames |
| Elementary_Functions.Log; |
| |
| -- flag used to terminate some tests early |
| Accuracy_Error_Reported : Boolean := False; |
| |
| |
| -- The following value is a lower bound on the accuracy |
| -- required. It is normally 0.0 so that the lower bound |
| -- is computed from Model_Epsilon. However, for tests |
| -- where the expected result is only known to a certain |
| -- amount of precision this bound takes on a non-zero |
| -- value to account for that level of precision. |
| Error_Low_Bound : Real := 0.0; |
| |
| procedure Check (Actual, Expected : Real; |
| Test_Name : String; |
| MRE : Real) is |
| Max_Error : Real; |
| Rel_Error : Real; |
| Abs_Error : Real; |
| begin |
| -- In the case where the expected result is very small or 0 |
| -- we compute the maximum error as a multiple of Model_Small instead |
| -- of Model_Epsilon and Expected. |
| Rel_Error := MRE * abs Expected * Real'Model_Epsilon; |
| Abs_Error := MRE * Real'Model_Small; |
| if Rel_Error > Abs_Error then |
| Max_Error := Rel_Error; |
| else |
| Max_Error := Abs_Error; |
| end if; |
| -- take into account the low bound on the error |
| if Max_Error < Error_Low_Bound then |
| Max_Error := Error_Low_Bound; |
| end if; |
| |
| if abs (Actual - Expected) > Max_Error then |
| Accuracy_Error_Reported := True; |
| Report.Failed (Test_Name & |
| " actual: " & Real'Image (Actual) & |
| " expected: " & Real'Image (Expected) & |
| " difference: " & Real'Image (Actual - Expected) & |
| " max err:" & Real'Image (Max_Error) ); |
| elsif Verbose then |
| if Actual = Expected then |
| Report.Comment (Test_Name & " exact result"); |
| else |
| Report.Comment (Test_Name & " passed"); |
| end if; |
| end if; |
| end Check; |
| |
| |
| procedure Special_Value_Test is |
| -- In the following tests the expected result is accurate |
| -- to the machine precision so the minimum guaranteed error |
| -- bound can be used. |
| Minimum_Error : constant := 8.0; |
| E2 : constant := E * E; |
| begin |
| Check (Tanh (1.0), |
| (E - 1.0 / E) / (E + 1.0 / E), |
| "tanh(1)", |
| Minimum_Error); |
| Check (Tanh (2.0), |
| (E2 - 1.0 / E2) / (E2 + 1.0 / E2), |
| "tanh(2)", |
| Minimum_Error); |
| exception |
| when Constraint_Error => |
| Report.Failed ("Constraint_Error raised in special value test"); |
| when others => |
| Report.Failed ("exception in special value test"); |
| end Special_Value_Test; |
| |
| |
| |
| procedure Exact_Result_Test is |
| No_Error : constant := 0.0; |
| begin |
| -- A.5.1(38);6.0 |
| Check (Tanh (0.0), 0.0, "tanh(0)", No_Error); |
| exception |
| when Constraint_Error => |
| Report.Failed ("Constraint_Error raised in Exact_Result Test"); |
| when others => |
| Report.Failed ("exception in Exact_Result Test"); |
| end Exact_Result_Test; |
| |
| |
| procedure Identity_Test (A, B : Real) is |
| -- For this test we use the identity |
| -- TANH(u+v) = [TANH(u) + TANH(v)] / [1 + TANH(u)*TANH(v)] |
| -- which is transformed to |
| -- TANH(x) = [TANH(y)+C] / [1 + TANH(y) * C] |
| -- where C = TANH(1/8) and y = x - 1/8 |
| -- |
| -- see Cody pg 248-249 for details on the error analysis. |
| -- The net result is a relative error bound of 16 * Model_Epsilon. |
| -- |
| -- The second part of this test checks the identity |
| -- TANH(-x) = -TANH(X) |
| |
| X, Y : Real; |
| Actual1, Actual2 : Real; |
| C : constant := 1.2435300177159620805e-1; |
| begin |
| if Real'Digits > 20 then |
| -- constant C is accurate to 20 digits. Set the low bound |
| -- on the error to 16*10**-20 |
| Error_Low_Bound := 0.00000_00000_00000_00016; |
| Report.Comment ("tanh accuracy checked to 20 digits"); |
| end if; |
| |
| Accuracy_Error_Reported := False; -- reset |
| for I in 1..Max_Samples loop |
| X := (B - A) * (Real (I) / Real (Max_Samples)) + A; |
| Actual1 := Tanh(X); |
| |
| -- TANH(x) = [TANH(y)+C] / [1 + TANH(y) * C] |
| Y := X - (1.0 / 8.0); |
| Actual2 := (Tanh (Y) + C) / (1.0 + Tanh(Y) * C); |
| |
| Check (Actual1, Actual2, |
| "Identity_1_Test " & Integer'Image (I) & ": tanh(" & |
| Real'Image (X) & ") ", |
| 16.0); |
| |
| -- TANH(-x) = -TANH(X) |
| Actual2 := Tanh(-X); |
| Check (-Actual1, Actual2, |
| "Identity_2_Test " & Integer'Image (I) & ": tanh(" & |
| Real'Image (X) & ") ", |
| 16.0); |
| |
| if Accuracy_Error_Reported then |
| -- only report the first error in this test in order to keep |
| -- lots of failures from producing a huge error log |
| return; |
| end if; |
| |
| end loop; |
| Error_Low_Bound := 0.0; -- reset |
| exception |
| when Constraint_Error => |
| Report.Failed |
| ("Constraint_Error raised in Identity_Test" & |
| " for X=" & Real'Image (X)); |
| when others => |
| Report.Failed ("exception in Identity_Test" & |
| " for X=" & Real'Image (X)); |
| end Identity_Test; |
| |
| |
| |
| procedure Do_Test is |
| begin |
| Special_Value_Test; |
| Exact_Result_Test; |
| -- cover a large range |
| Identity_Test (1.0, Real'Safe_Last); |
| end Do_Test; |
| end Generic_Check; |
| |
| ----------------------------------------------------------------------- |
| ----------------------------------------------------------------------- |
| package Float_Check is new Generic_Check (Float); |
| |
| -- check the floating point type with the most digits |
| type A_Long_Float is digits System.Max_Digits; |
| package A_Long_Float_Check is new Generic_Check (A_Long_Float); |
| |
| ----------------------------------------------------------------------- |
| ----------------------------------------------------------------------- |
| |
| |
| begin |
| Report.Test ("CXG2017", |
| "Check the accuracy of the TANH function"); |
| |
| if Verbose then |
| Report.Comment ("checking Standard.Float"); |
| end if; |
| |
| Float_Check.Do_Test; |
| |
| if Verbose then |
| Report.Comment ("checking a digits" & |
| Integer'Image (System.Max_Digits) & |
| " floating point type"); |
| end if; |
| |
| A_Long_Float_Check.Do_Test; |
| |
| |
| Report.Result; |
| end CXG2017; |