------------------------------------------------------------------------------
--                                                                          --
--                         GNAT COMPILER COMPONENTS                         --
--                                                                          --
--                              S T Y L E S W                               --
--                                                                          --
--                                 S p e c                                  --
--                                                                          --
--          Copyright (C) 1992-2006, Free Software Foundation, Inc.         --
--                                                                          --
-- GNAT is free software;  you can  redistribute it  and/or modify it under --
-- terms of the  GNU General Public License as published  by the Free Soft- --
-- ware  Foundation;  either version 2,  or (at your option) any later ver- --
-- sion.  GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY;  without even the  implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License --
-- for  more details.  You should have  received  a copy of the GNU General --
-- Public License  distributed with GNAT;  see file COPYING.  If not, write --
-- to  the  Free Software Foundation,  51  Franklin  Street,  Fifth  Floor, --
-- Boston, MA 02110-1301, USA.                                              --
--                                                                          --
-- GNAT was originally developed  by the GNAT team at  New York University. --
-- Extensive contributions were provided by Ada Core Technologies Inc.      --
--                                                                          --
------------------------------------------------------------------------------

--  This package contains the style switches used for setting style options.
--  The only clients of this package are the body of Style and the body of
--  Switches. All other style checking issues are handled using the public
--  interfaces in the spec of Style.

with Types; use Types;

package Stylesw is

   --------------------------
   -- Style Check Switches --
   --------------------------

   --  These flags are used to control the details of the style checking
   --  options. The default values shown here correspond to no style
   --  checking. If any of these values is set to a non-default value,
   --  then Opt.Style_Check is set True to active calls to this package.

   --  The actual mechanism for setting these switches to other than
   --  default values is via the Set_Style_Check_Option procedure or
   --  through a call to Set_Default_Style_Check_Options. They should
   --  not be set directly in any other manner.

   Style_Check_Attribute_Casing : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatya switches. If
   --  it is True, then attribute names (including keywords such as
   --  digits used as attribute names) must be in mixed case.

   Style_Check_Blanks_At_End : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatyb switches. If
   --  it is True, then spaces at the end of lines are not permitted.

   Style_Check_Blank_Lines : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatyu switches. If
   --  it is True, then multiple blank lines are not permitted, and there
   --  may not be a blank line at the end of the file.

   Style_Check_Comments : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatyc switches. If
   --  it is True, then comments are style checked as follows:
   --
   --    All comments must be at the start of the line, or the first
   --    minus must be preceded by at least one space.
   --
   --    For a comment that is not at the start of a line, the only
   --    requirement is that a space follow the comment characters.
   --
   --    For a coment that is at the start of the line, one of the
   --    following conditions must hold:
   --
   --      The comment characters are the only non-blank characters on the line
   --
   --      The comment characters are followed by an exclamation point (the
   --      sequence --! is used by gnatprep for marking deleted lines).
   --
   --      The comment characters are followed by two space characters
   --
   --      The line consists entirely of minus signs
   --
   --      The comment characters are followed by a single space, and the
   --      last two characters on the line are also comment characters.
   --
   --  Note: the reason for the last two conditions is to allow "boxed"
   --  comments where only a single space separates the comment characters.

   Style_Check_DOS_Line_Terminator : Boolean := False;
   --  This can be set true by using the -gnatg or -gnatyd switches. If
   --  it is True, then the line terminator must be a single LF, without an
   --  associated CR (e.g. DOS line terminator sequence CR/LF not allowed).

   Style_Check_End_Labels : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatye switches. If
   --  it is True, then optional END labels must always be present.

   Style_Check_Form_Feeds : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatyf switches. If
   --  it is True, then form feeds and vertical tabs are not allowed in
   --  the source text.

   Style_Check_Horizontal_Tabs : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatyh switches. If
   --  it is True, then horizontal tabs are not allowed in source text.

   Style_Check_If_Then_Layout : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatyi switches. If
   --  it is True, then a THEN keyword may not appear on the line that
   --  immediately follows the line containing the corresponding IF.
   --
   --  This permits one of two styles for IF-THEN layout. Either the
   --  IF and THEN keywords are on the same line, where the condition
   --  is short enough, or the conditions are continued over to the
   --  lines following the IF and the THEN stands on its own. For
   --  example:
   --
   --    if X > Y then
   --
   --    if X > Y
   --      and then Y < Z
   --    then
   --
   --  are allowed, but
   --
   --    if X > Y
   --    then
   --
   --  is not allowed.

   Style_Check_Indentation : Column_Number range 0 .. 9 := 0;
   --  This can be set non-zero by using the -gnatg or -gnatyn (n a digit)
   --  switches. If it is non-zero it activates indentation checking with
   --  the indicated indentation value. A value of zero turns off checking.
   --  The requirement is that any new statement, line comment, declaration
   --  or keyword such as END, start on a column that is a multiple of the
   --  indentiation value.

   Style_Check_Keyword_Casing : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatyk switches. If
   --  it is True, then keywords are required to be in all lower case.
   --  This rule does not apply to keywords such as digits appearing as
   --  an attribute name.

   Style_Check_Max_Line_Length : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatym/M switches.
   --  If it is True, it activates checking for a maximum line length of
   --  Style_Max_Line_Length characters.

   Style_Check_Max_Nesting_Level : Boolean := False;
   --  This can be set True by using -gnatyLnnn with a value other than
   --  zero (a value of zero resets it to False). If True, it activates
   --  checking the maximum nesting level against Style_Max_Nesting_Level.

   Style_Check_Mode_In : Boolean := False;
   --  This can be set True by using -gnatyI. If True, it activates checking
   --  that mode IN is not used on its own (since it is the default).

   Style_Check_Order_Subprograms : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatyo switch. If it
   --  is True, then names of subprogram bodies must be in alphabetical
   --  order (not taking casing into account).

   Style_Check_Pragma_Casing : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatyp switches. If
   --  it is True, then pragma names must use mixed case.

   Style_Check_Layout : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatyl switches. If
   --  it is True, it activates checks that constructs are indented as
   --  suggested by the examples in the RM syntax, e.g. that the ELSE
   --  keyword must line up with the IF keyword.

   Style_Check_References : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatyr switches. If
   --  it is True, then all references to declared identifiers are
   --  checked. The requirement is that casing of the reference be the
   --  same as the casing of the corresponding declaration.

   Style_Check_Specs : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatys switches. If
   --  it is True, then separate specs are required to be present for
   --  all procedures except parameterless library level procedures.
   --  The exception means that typical main programs do not require
   --  separate specs.

   Style_Check_Standard : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatyn switches. If
   --  it is True, then any references to names in Standard have to be
   --  in mixed case mode (e.g. Integer, Boolean).

   Style_Check_Tokens : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatyt switches. If
   --  it is True, then the style check that requires canonical spacing
   --  between various punctuation tokens as follows:
   --
   --    ABS and NOT must be followed by a space
   --
   --    => must be surrounded by spaces
   --
   --    <> must be preceded by a space or left paren
   --
   --    Binary operators other than ** must be surrounded by spaces.
   --    There is no restriction on the layout of the ** binary operator.
   --
   --    Colon must be surrounded by spaces
   --
   --    Colon-equal (assignment) must be surrounded by spaces
   --
   --    Comma must be the first non-blank character on the line, or be
   --    immediately preceded by a non-blank character, and must be followed
   --    by a blank.
   --
   --    A space must precede a left paren following a digit or letter,
   --    and a right paren must not be followed by a space (it can be
   --    at the end of the line).
   --
   --    A right paren must either be the first non-blank character on
   --    a line, or it must be preceded by a non-blank character.
   --
   --    A semicolon must not be preceded by a blank, and must not be
   --    followed by a non-blank character.
   --
   --    A unary plus or minus may not be followed by a space
   --
   --    A vertical bar must be surrounded by spaces
   --
   --  Note that a requirement that a token be preceded by a space is
   --  met by placing the token at the start of the line, and similarly
   --  a requirement that a token be followed by a space is met by
   --  placing the token at the end of the line. Note that in the case
   --  where horizontal tabs are permitted, a horizontal tab is acceptable
   --  for meeting the requirement for a space.

   Style_Check_Xtra_Parens : Boolean := False;
   --  This can be set True by using the -gnatg or -gnatyx switch. If true,
   --  then it is not allowed to enclose entire conditional expressions
   --  in parentheses (C style).

   Style_Max_Line_Length : Int := 0;
   --  Value used to check maximum line length. Gets reset as a result of
   --  use of -gnatym or -gnatyMnnn switches (or by use of -gnatg). This
   --  value is only read if Style_Check_Max_Line_Length is True.

   Style_Max_Nesting_Level : Int := 0;
   --  Value used to check maximum nesting level. Gets reset as a result
   --  of use of the -gnatyLnnn switch. This value is only read if
   --  Style_Check_Max_Nesting_Level is True.

   -----------------
   -- Subprograms --
   -----------------

   procedure Set_Default_Style_Check_Options;
   --  This procedure is called to set the default style checking options
   --  in response to a -gnaty switch with no suboptions.

   Style_Msg_Buf : String (1 .. 80);
   Style_Msg_Len : Natural;
   --  Used to return

   procedure Set_Style_Check_Options
     (Options  : String;
      OK       : out Boolean;
      Err_Col  : out Natural);
   --  This procedure is called to set the style check options that correspond
   --  to the characters in the given Options string. If all options are valid,
   --  they are set in an additive manner: any previous options are retained
   --  unless overridden.
   --
   --  If all options given are valid, then OK is True, Err_Col is set to
   --  Options'Last + 1, and Style_Msg_Buf/Style_Msg_Len are unchanged.
   --
   --  If an invalid character is found, then OK is False on exit, and Err_Col
   --  is the index in options of the bad character. In this case Style_Msg_Len
   --  is set and Style_Msg_Buf (1 .. Style_Msg_Len) has a detailed message
   --  describing the error.

   procedure Set_Style_Check_Options (Options : String);
   --  Like the above procedure, but used when the Options string is known to
   --  be valid. This is for example appopriate for calls where the string ==
   --  was obtained by Save_Style_Check_Options.

   procedure Reset_Style_Check_Options;
   --  Sets all style check options to off

   subtype Style_Check_Options is String (1 .. 64);
   --  Long enough string to hold all options from Save call below

   procedure Save_Style_Check_Options (Options : out Style_Check_Options);
   --  Sets Options to represent current selection of options. This
   --  set can be restored by first calling Reset_Style_Check_Options,
   --  and then calling Set_Style_Check_Options with the Options string.

end Stylesw;