------------------------------------------------------------------------------
--                                                                          --
--                         GNAT COMPILER COMPONENTS                         --
--                                                                          --
--                             P A R . C H 1 0                              --
--                                                                          --
--                                 B o d y                                  --
--                                                                          --
--          Copyright (C) 1992-2005, Free Software Foundation, Inc.         --
--                                                                          --
-- GNAT is free software;  you can  redistribute it  and/or modify it under --
-- terms of the  GNU General Public License as published  by the Free Soft- --
-- ware  Foundation;  either version 2,  or (at your option) any later ver- --
-- sion.  GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY;  without even the  implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License --
-- for  more details.  You should have  received  a copy of the GNU General --
-- Public License  distributed with GNAT;  see file COPYING.  If not, write --
-- to  the  Free Software Foundation,  51  Franklin  Street,  Fifth  Floor, --
-- Boston, MA 02110-1301, USA.                                              --
--                                                                          --
-- GNAT was originally developed  by the GNAT team at  New York University. --
-- Extensive contributions were provided by Ada Core Technologies Inc.      --
--                                                                          --
------------------------------------------------------------------------------

pragma Style_Checks (All_Checks);
--  Turn off subprogram body ordering check. Subprograms are in order
--  by RM section rather than alphabetical

with Fname.UF; use Fname.UF;
with Uname;    use Uname;

separate (Par)
package body Ch10 is

   --  Local functions, used only in this chapter

   function P_Context_Clause    return List_Id;
   function P_Subunit           return Node_Id;

   function Set_Location return Source_Ptr;
   --  The current compilation unit starts with Token at Token_Ptr. This
   --  function determines the corresponding source location for the start
   --  of the unit, including any preceding comment lines.

   procedure Unit_Display
     (Cunit      : Node_Id;
      Loc        : Source_Ptr;
      SR_Present : Boolean);
   --  This procedure is used to generate a line of output for the a unit in
   --  the source program. Cunit is the node for the compilation unit, and
   --  Loc is the source location for the start of the unit in the source
   --  file (which is not necessarily the Sloc of the Cunit node). This
   --  output is written to the standard output file for use by gnatchop.

   procedure Unit_Location (Sind : Source_File_Index; Loc : Source_Ptr);
   --  This routine has the same calling sequence as Unit_Display, but
   --  it outputs only the line number and offset of the location, Loc,
   --  using Cunit to obtain the proper source file index.

   -------------------------
   -- 10.1.1  Compilation --
   -------------------------

   --  COMPILATION ::= {COMPILATION_UNIT}

   --  There is no specific parsing routine for a compilation, since we only
   --  permit a single compilation in a source file, so there is no explicit
   --  occurrence of compilations as such (our representation of a compilation
   --  is a series of separate source files).

   ------------------------------
   -- 10.1.1  Compilation unit --
   ------------------------------

   --  COMPILATION_UNIT ::=
   --    CONTEXT_CLAUSE LIBRARY_ITEM
   --  | CONTEXT_CLAUSE SUBUNIT

   --  LIBRARY_ITEM ::=
   --    private LIBRARY_UNIT_DECLARATION
   --  | LIBRARY_UNIT_BODY
   --  | [private] LIBRARY_UNIT_RENAMING_DECLARATION

   --  LIBRARY_UNIT_DECLARATION ::=
   --    SUBPROGRAM_DECLARATION | PACKAGE_DECLARATION
   --  | GENERIC_DECLARATION    | GENERIC_INSTANTIATION

   --  LIBRARY_UNIT_RENAMING_DECLARATION ::=
   --    PACKAGE_RENAMING_DECLARATION
   --  | GENERIC_RENAMING_DECLARATION
   --  | SUBPROGRAM_RENAMING_DECLARATION

   --  LIBRARY_UNIT_BODY ::= SUBPROGRAM_BODY | PACKAGE_BODY

   --  Error recovery: cannot raise Error_Resync. If an error occurs, tokens
   --  are skipped up to the next possible beginning of a compilation unit.

   --  Note: if only configuration pragmas are found, Empty is returned

   --  Note: in syntax-only mode, it is possible for P_Compilation_Unit
   --  to return strange things that are not really compilation units.
   --  This is done to help out gnatchop when it is faced with nonsense.

   function P_Compilation_Unit return Node_Id is
      Scan_State         : Saved_Scan_State;
      Body_Node          : Node_Id;
      Specification_Node : Node_Id;
      Unit_Node          : Node_Id;
      Comp_Unit_Node     : Node_Id;
      Name_Node          : Node_Id;
      Item               : Node_Id;
      Private_Sloc       : Source_Ptr := No_Location;
      Config_Pragmas     : List_Id;
      P                  : Node_Id;
      SR_Present         : Boolean;

      Cunit_Error_Flag   : Boolean := False;
      --  This flag is set True if we have to scan for a compilation unit
      --  token. It is used to ensure clean termination in such cases by
      --  not insisting on being at the end of file, and, in the sytax only
      --  case by not scanning for additional compilation units.

      Cunit_Location : Source_Ptr;
      --  Location of unit for unit identification output (List_Unit option)

   begin
      Num_Library_Units := Num_Library_Units + 1;

      --  Set location of the compilation unit if unit list option set
      --  and we are in syntax check only mode

      if List_Units and then Operating_Mode = Check_Syntax then
         Cunit_Location := Set_Location;
      else
         Cunit_Location := No_Location;
      end if;

      --  Deal with initial pragmas

      Config_Pragmas := No_List;

      --  If we have an initial Source_Reference pragma, then remember
      --  the fact to generate an NR parameter in the output line.

      SR_Present := False;

      if Token = Tok_Pragma then
         Save_Scan_State (Scan_State);
         Item := P_Pragma;

         if Item = Error
           or else Chars (Item) /= Name_Source_Reference
         then
            Restore_Scan_State (Scan_State);

         else
            SR_Present := True;

            --  If first unit, record the file name for gnatchop use

            if Operating_Mode = Check_Syntax
              and then List_Units
              and then Num_Library_Units = 1
            then
               Write_Str ("Source_Reference pragma for file """);
               Write_Name (Full_Ref_Name (Current_Source_File));
               Write_Char ('"');
               Write_Eol;
            end if;

            Config_Pragmas := New_List (Item);
         end if;
      end if;

      --  Scan out any configuration pragmas

      while Token = Tok_Pragma loop
         Save_Scan_State (Scan_State);
         Item := P_Pragma;

         if Item = Error
           or else Chars (Item) > Last_Configuration_Pragma_Name
         then
            Restore_Scan_State (Scan_State);
            exit;
         end if;

         if Config_Pragmas = No_List then
            Config_Pragmas := Empty_List;

            if Operating_Mode = Check_Syntax and then List_Units then
               Write_Str ("Configuration pragmas at");
               Unit_Location (Current_Source_File, Cunit_Location);
               Write_Eol;
            end if;
         end if;

         Append (Item, Config_Pragmas);
         Cunit_Location := Set_Location;
      end loop;

      --  Establish compilation unit node and scan context items

      Comp_Unit_Node := New_Node (N_Compilation_Unit, No_Location);
      Set_Cunit (Current_Source_Unit, Comp_Unit_Node);
      Set_Context_Items (Comp_Unit_Node, P_Context_Clause);
      Set_Aux_Decls_Node
        (Comp_Unit_Node, New_Node (N_Compilation_Unit_Aux, No_Location));

      if Present (Config_Pragmas) then

         --  Check for case of only configuration pragmas present

         if Token = Tok_EOF
           and then Is_Empty_List (Context_Items (Comp_Unit_Node))
         then
            if Operating_Mode = Check_Syntax then
               return Empty;

            else
               Item := First (Config_Pragmas);
               Error_Msg_N
                 ("cannot compile configuration pragmas with gcc", Item);
               Error_Msg_N
                 ("use gnatchop -c to process configuration pragmas!", Item);
               raise Unrecoverable_Error;
            end if;

         --  Otherwise configuration pragmas are simply prepended to the
         --  context of the current unit.

         else
            Append_List (Context_Items (Comp_Unit_Node), Config_Pragmas);
            Set_Context_Items (Comp_Unit_Node, Config_Pragmas);
         end if;
      end if;

      --  Check for PRIVATE. Note that for the moment we allow this in
      --  Ada_83 mode, since we do not yet know if we are compiling a
      --  predefined unit, and if we are then it would be allowed anyway.

      if Token = Tok_Private then
         Private_Sloc := Token_Ptr;
         Set_Keyword_Casing (Current_Source_File, Determine_Token_Casing);
         if Style_Check then Style.Check_Indentation; end if;

         Save_Scan_State (Scan_State); -- at PRIVATE
         Scan; -- past PRIVATE

         if Token = Tok_Separate then
            Error_Msg_SP ("cannot have private subunits!");

         elsif Token = Tok_Package then
            Scan; -- past PACKAGE

            if Token = Tok_Body then
               Restore_Scan_State (Scan_State); -- to PRIVATE
               Error_Msg_SC ("cannot have private package body!");
               Scan; -- ignore PRIVATE

            else
               Restore_Scan_State (Scan_State); -- to PRIVATE
               Scan; -- past PRIVATE
               Set_Private_Present (Comp_Unit_Node, True);
            end if;

         elsif Token = Tok_Procedure
           or else Token = Tok_Function
           or else Token = Tok_Generic
         then
            Set_Private_Present (Comp_Unit_Node, True);
         end if;
      end if;

      --  Loop to find our way to a compilation unit token

      loop
         exit when Token in Token_Class_Cunit and then Token /= Tok_With;

         exit when Bad_Spelling_Of (Tok_Package)
           or else Bad_Spelling_Of (Tok_Function)
           or else Bad_Spelling_Of (Tok_Generic)
           or else Bad_Spelling_Of (Tok_Separate)
           or else Bad_Spelling_Of (Tok_Procedure);

         --  Allow task and protected for nice error recovery purposes

         exit when Token = Tok_Task
           or else Token = Tok_Protected;

         if Token = Tok_With then
            Error_Msg_SC ("misplaced WITH");
            Append_List (P_Context_Clause, Context_Items (Comp_Unit_Node));

         elsif Bad_Spelling_Of (Tok_With) then
            Append_List (P_Context_Clause, Context_Items (Comp_Unit_Node));

         else
            if Operating_Mode = Check_Syntax and then Token = Tok_EOF then
               Error_Msg_SC ("?file contains no compilation units");
            else
               Error_Msg_SC ("compilation unit expected");
               Cunit_Error_Flag := True;
               Resync_Cunit;
            end if;

            --  If we are at an end of file, then just quit, the above error
            --  message was complaint enough.

            if Token = Tok_EOF then
               return Error;
            end if;
         end if;
      end loop;

      --  We have a compilation unit token, so that's a reasonable choice for
      --  determining the standard casing convention used for keywords in case
      --  it hasn't already been done on seeing a WITH or PRIVATE.

      Set_Keyword_Casing (Current_Source_File, Determine_Token_Casing);
      if Style_Check then Style.Check_Indentation; end if;

      --  Remaining processing depends on particular type of compilation unit

      if Token = Tok_Package then

         --  A common error is to omit the body keyword after package. We can
         --  often diagnose this early on (before getting loads of errors from
         --  contained subprogram bodies), by knowing that that the file we
         --  are compiling has a name that requires a body to be found.

         Save_Scan_State (Scan_State);
         Scan; -- past Package keyword

         if Token /= Tok_Body
           and then
             Get_Expected_Unit_Type
               (File_Name (Current_Source_File)) = Expect_Body
         then
            Error_Msg_BC ("keyword BODY expected here [see file name]");
            Restore_Scan_State (Scan_State);
            Set_Unit (Comp_Unit_Node, P_Package (Pf_Pbod));
         else
            Restore_Scan_State (Scan_State);
            Set_Unit (Comp_Unit_Node, P_Package (Pf_Decl_Gins_Pbod_Rnam));
         end if;

      elsif Token = Tok_Generic then
         Set_Unit (Comp_Unit_Node, P_Generic);

      elsif Token = Tok_Separate then
         Set_Unit (Comp_Unit_Node, P_Subunit);

      elsif Token = Tok_Function
        or else Token = Tok_Not
        or else Token = Tok_Overriding
        or else Token = Tok_Procedure
      then
         Set_Unit (Comp_Unit_Node, P_Subprogram (Pf_Decl_Gins_Pbod_Rnam));

         --  A little bit of an error recovery check here. If we just scanned
         --  a subprogram declaration (as indicated by an SIS entry being
         --  active), then if the following token is BEGIN or an identifier,
         --  or a token which can reasonably start a declaration but cannot
         --  start a compilation unit, then we assume that the semicolon in
         --  the declaration should have been IS.

         if SIS_Entry_Active then

            if Token = Tok_Begin
               or else Token = Tok_Identifier
               or else Token in Token_Class_Deckn
            then
               Push_Scope_Stack;
               Scope.Table (Scope.Last).Etyp := E_Name;
               Scope.Table (Scope.Last).Sloc := SIS_Sloc;
               Scope.Table (Scope.Last).Ecol := SIS_Ecol;
               Scope.Table (Scope.Last).Lreq := False;
               SIS_Entry_Active := False;

               --  If we had a missing semicolon in the declaration, then
               --  change the message to from <missing ";"> to <missing "is">

               if SIS_Missing_Semicolon_Message /= No_Error_Msg then
                  Change_Error_Text     -- Replace: "missing "";"" "
                    (SIS_Missing_Semicolon_Message, "missing IS");

               --  Otherwise we saved the semicolon position, so complain

               else
                  Error_Msg (""";"" should be IS", SIS_Semicolon_Sloc);
               end if;

               Body_Node := Unit (Comp_Unit_Node);
               Specification_Node := Specification (Body_Node);
               Change_Node (Body_Node, N_Subprogram_Body);
               Set_Specification (Body_Node, Specification_Node);
               Parse_Decls_Begin_End (Body_Node);
               Set_Unit (Comp_Unit_Node, Body_Node);
            end if;

         --  If we scanned a subprogram body, make sure we did not have private

         elsif Private_Sloc /= No_Location
           and then
             Nkind (Unit (Comp_Unit_Node)) not in N_Subprogram_Instantiation
           and then
             Nkind (Unit (Comp_Unit_Node)) /= N_Subprogram_Renaming_Declaration
         then
            Error_Msg ("cannot have private subprogram body", Private_Sloc);

         --  P_Subprogram can yield an abstract subprogram, but this cannot
         --  be a compilation unit. Treat as a subprogram declaration.

         elsif
           Nkind (Unit (Comp_Unit_Node)) = N_Abstract_Subprogram_Declaration
         then
            Error_Msg_N
              ("compilation unit cannot be abstract subprogram",
                 Unit (Comp_Unit_Node));

            Unit_Node :=
              New_Node (N_Subprogram_Declaration, Sloc (Comp_Unit_Node));
            Set_Specification (Unit_Node,
              Specification (Unit (Comp_Unit_Node)));
            Set_Unit (Comp_Unit_Node, Unit_Node);
         end if;

      --  Otherwise we have TASK. This is not really an acceptable token,
      --  but we accept it to improve error recovery.

      elsif Token = Tok_Task then
         Scan; -- Past TASK

         if Token = Tok_Type then
            Error_Msg_SP
              ("task type cannot be used as compilation unit");
         else
            Error_Msg_SP
              ("task declaration cannot be used as compilation unit");
         end if;

         --  If in check syntax mode, accept the task anyway. This is done
         --  particularly to improve the behavior of GNATCHOP in this case.

         if Operating_Mode = Check_Syntax then
            Set_Unit (Comp_Unit_Node, P_Task);

         --  If not in syntax only mode, treat this as horrible error

         else
            Cunit_Error_Flag := True;
            return Error;
         end if;

      else pragma Assert (Token = Tok_Protected);
         Scan; -- Past PROTECTED

         if Token = Tok_Type then
            Error_Msg_SP
              ("protected type cannot be used as compilation unit");
         else
            Error_Msg_SP
              ("protected declaration cannot be used as compilation unit");
         end if;

         --  If in check syntax mode, accept protected anyway. This is done
         --  particularly to improve the behavior of GNATCHOP in this case.

         if Operating_Mode = Check_Syntax then
            Set_Unit (Comp_Unit_Node, P_Protected);

         --  If not in syntax only mode, treat this as horrible error

         else
            Cunit_Error_Flag := True;
            return Error;
         end if;
      end if;

      --  Here is where locate the compilation unit entity. This is a little
      --  tricky, since it is buried in various places.

      Unit_Node := Unit (Comp_Unit_Node);

      --  Another error from which it is hard to recover

      if Nkind (Unit_Node) = N_Subprogram_Body_Stub
        or else Nkind (Unit_Node) = N_Package_Body_Stub
      then
         Cunit_Error_Flag := True;
         return Error;
      end if;

      --  Only try this if we got an OK unit!

      if Unit_Node /= Error then
         if Nkind (Unit_Node) = N_Subunit then
            Unit_Node := Proper_Body (Unit_Node);
         end if;

         if Nkind (Unit_Node) in N_Generic_Declaration then
            Unit_Node := Specification (Unit_Node);
         end if;

         if Nkind (Unit_Node) = N_Package_Declaration
           or else Nkind (Unit_Node) = N_Subprogram_Declaration
           or else Nkind (Unit_Node) = N_Subprogram_Body
           or else Nkind (Unit_Node) = N_Subprogram_Renaming_Declaration
         then
            Unit_Node := Specification (Unit_Node);

         elsif Nkind (Unit_Node) = N_Subprogram_Renaming_Declaration then
            if Ada_Version = Ada_83 then
               Error_Msg_N
                 ("(Ada 83) library unit renaming not allowed", Unit_Node);
            end if;
         end if;

         if Nkind (Unit_Node) = N_Task_Body
           or else Nkind (Unit_Node) = N_Protected_Body
           or else Nkind (Unit_Node) = N_Task_Type_Declaration
           or else Nkind (Unit_Node) = N_Protected_Type_Declaration
           or else Nkind (Unit_Node) = N_Single_Task_Declaration
           or else Nkind (Unit_Node) = N_Single_Protected_Declaration
         then
            Name_Node := Defining_Identifier (Unit_Node);

         elsif Nkind (Unit_Node) = N_Function_Instantiation
           or else Nkind (Unit_Node) = N_Function_Specification
           or else Nkind (Unit_Node) = N_Generic_Function_Renaming_Declaration
           or else Nkind (Unit_Node) = N_Generic_Package_Renaming_Declaration
           or else Nkind (Unit_Node) = N_Generic_Procedure_Renaming_Declaration
           or else Nkind (Unit_Node) = N_Package_Body
           or else Nkind (Unit_Node) = N_Package_Instantiation
           or else Nkind (Unit_Node) = N_Package_Renaming_Declaration
           or else Nkind (Unit_Node) = N_Package_Specification
           or else Nkind (Unit_Node) = N_Procedure_Instantiation
           or else Nkind (Unit_Node) = N_Procedure_Specification
         then
            Name_Node := Defining_Unit_Name (Unit_Node);

         --  Anything else is a serious error, abandon scan

         else
            raise Error_Resync;
         end if;

         Set_Sloc (Comp_Unit_Node, Sloc (Name_Node));
         Set_Sloc (Aux_Decls_Node (Comp_Unit_Node), Sloc (Name_Node));

         --  Set Entity field in file table. Easier now that we have name!
         --  Note that this is also skipped if we had a bad unit

         if Nkind (Name_Node) = N_Defining_Program_Unit_Name then
            Set_Cunit_Entity
              (Current_Source_Unit, Defining_Identifier (Name_Node));
         else
            Set_Cunit_Entity (Current_Source_Unit, Name_Node);
         end if;

         Set_Unit_Name
           (Current_Source_Unit, Get_Unit_Name (Unit (Comp_Unit_Node)));

      --  If we had a bad unit, make sure the fatal flag is set in the file
      --  table entry, since this is surely a fatal error and also set our
      --  flag to inhibit the requirement that we be at end of file.

      else
         Cunit_Error_Flag := True;
         Set_Fatal_Error (Current_Source_Unit);
      end if;

      --  Clear away any missing semicolon indication, we are done with that
      --  unit, so what's done is done, and we don't want anything hanging
      --  around from the attempt to parse it!

      SIS_Entry_Active := False;

      --  Scan out pragmas after unit

      while Token = Tok_Pragma loop
         Save_Scan_State (Scan_State);

         --  If we are in syntax scan mode allowing multiple units, then
         --  start the next unit if we encounter a configuration pragma,
         --  or a source reference pragma. We take care not to actually
         --  scan the pragma in this case since we don't want it to take
         --  effect for the current unit.

         if Operating_Mode = Check_Syntax then
            Scan;  -- past Pragma

            if Token = Tok_Identifier
              and then
                (Token_Name in
                         First_Pragma_Name .. Last_Configuration_Pragma_Name
                   or else Token_Name = Name_Source_Reference)
            then
               Restore_Scan_State (Scan_State); -- to Pragma
               exit;
            end if;
         end if;

         --  Otherwise eat the pragma, it definitely belongs with the
         --  current unit, and not with the following unit.

         Restore_Scan_State (Scan_State); -- to Pragma
         P := P_Pragma;

         if No (Pragmas_After (Aux_Decls_Node (Comp_Unit_Node))) then
            Set_Pragmas_After
              (Aux_Decls_Node (Comp_Unit_Node), New_List);
         end if;

         Append (P, Pragmas_After (Aux_Decls_Node (Comp_Unit_Node)));
      end loop;

      --  Cancel effect of any outstanding pragma Warnings (Off)

      Set_Warnings_Mode_On (Scan_Ptr);

      --  Ada 83 error checks

      if Ada_Version = Ada_83 then

         --  Check we did not with any child units

         Item := First (Context_Items (Comp_Unit_Node));

         while Present (Item) loop
            if Nkind (Item) = N_With_Clause
              and then Nkind (Name (Item)) /= N_Identifier
            then
               Error_Msg_N ("(Ada 83) child units not allowed", Item);
            end if;

            Next (Item);
         end loop;

         --  Check that we did not have a PRIVATE keyword present

         if Private_Present (Comp_Unit_Node) then
            Error_Msg
              ("(Ada 83) private units not allowed", Private_Sloc);
         end if;
      end if;

      --  If no serious error, then output possible unit information line
      --  for gnatchop if we are in syntax only, list units mode.

      if not Cunit_Error_Flag
        and then List_Units
        and then Operating_Mode = Check_Syntax
      then
         Unit_Display (Comp_Unit_Node, Cunit_Location, SR_Present);
      end if;

      --  And now we should be at the end of file

      if Token /= Tok_EOF then

         --  If we already had to scan for a compilation unit, then don't
         --  give any further error message, since it just sems to make
         --  things worse, and we already gave a serious error message.

         if Cunit_Error_Flag then
            null;

         --  If we are in check syntax mode, then we allow multiple units
         --  so we just return with Token not set to Tok_EOF and no message.

         elsif Operating_Mode = Check_Syntax then
            return Comp_Unit_Node;

         --  We also allow multiple units if we are in multiple unit mode

         elsif Multiple_Unit_Index /= 0 then

            --  Skip tokens to end of file, so that the -gnatl listing
            --  will be complete in this situation, but no need to parse
            --  the remaining units; no style checking either.

            declare
               Save_Style_Check : constant Boolean := Style_Check;

            begin
               Style_Check := False;

               while Token /= Tok_EOF loop
                  Scan;
               end loop;

               Style_Check := Save_Style_Check;
            end;

            return Comp_Unit_Node;

         --  Otherwise we have an error. We suppress the error message
         --  if we already had a fatal error, since this stops junk
         --  cascaded messages in some situations.

         else
            if not Fatal_Error (Current_Source_Unit) then
               if Token in Token_Class_Cunit then
                  Error_Msg_SC
                    ("end of file expected, " &
                     "file can have only one compilation unit");
               else
                  Error_Msg_SC ("end of file expected");
               end if;
            end if;
         end if;

         --  Skip tokens to end of file, so that the -gnatl listing
         --  will be complete in this situation, but no error checking
         --  other than that provided at the token level.

         while Token /= Tok_EOF loop
            Scan;
         end loop;

         return Error;

      --  Normal return (we were at the end of file as expected)

      else
         return Comp_Unit_Node;
      end if;

   exception

      --  An error resync is a serious bomb, so indicate result unit no good

      when Error_Resync =>
         Set_Fatal_Error (Current_Source_Unit);
         return Error;
   end P_Compilation_Unit;

   --------------------------
   -- 10.1.1  Library Item --
   --------------------------

   --  Parsed by P_Compilation_Unit (10.1.1)

   --------------------------------------
   -- 10.1.1  Library Unit Declaration --
   --------------------------------------

   --  Parsed by P_Compilation_Unit (10.1.1)

   ------------------------------------------------
   -- 10.1.1  Library Unit Renaming Declaration  --
   ------------------------------------------------

   --  Parsed by P_Compilation_Unit (10.1.1)

   -------------------------------
   -- 10.1.1  Library Unit Body --
   -------------------------------

   --  Parsed by P_Compilation_Unit (10.1.1)

   ------------------------------
   -- 10.1.1  Parent Unit Name --
   ------------------------------

   --  Parsed (as a name) by its parent construct

   ----------------------------
   -- 10.1.2  Context Clause --
   ----------------------------

   --  CONTEXT_CLAUSE ::= {CONTEXT_ITEM}

   --  CONTEXT_ITEM ::= WITH_CLAUSE | USE_CLAUSE | WITH_TYPE_CLAUSE

   --  WITH_CLAUSE ::=
   --  [LIMITED] [PRIVATE]  with library_unit_NAME {,library_unit_NAME};
   --  Note: the two qualifiers are Ada 2005 extensions.

   --  WITH_TYPE_CLAUSE ::=
   --    with type type_NAME is access; | with type type_NAME is tagged;
   --  Note: this form is obsolete (old GNAT extension).

   --  Error recovery: Cannot raise Error_Resync

   function P_Context_Clause return List_Id is
      Item_List   : List_Id;
      Has_Limited : Boolean := False;
      Has_Private : Boolean := False;
      Scan_State  : Saved_Scan_State;
      With_Node   : Node_Id;
      First_Flag  : Boolean;

   begin
      Item_List := New_List;

      --  Get keyword casing from WITH keyword in case not set yet

      if Token = Tok_With then
         Set_Keyword_Casing (Current_Source_File, Determine_Token_Casing);
      end if;

      --  Loop through context items

      loop
         if Style_Check then Style.Check_Indentation; end if;

         --  Gather any pragmas appearing in the context clause

         P_Pragmas_Opt (Item_List);

         --  Processing for WITH clause

         --  Ada 2005 (AI-50217, AI-262): First check for LIMITED WITH,
         --  PRIVATE WITH, or both.

         if Token = Tok_Limited then
            Has_Limited := True;
            Has_Private := False;
            Scan; -- past LIMITED

            --  In the context, LIMITED can only appear in a with_clause

            if Token = Tok_Private then
               Has_Private := True;
               Scan;  -- past PRIVATE
            end if;

            if Token /= Tok_With then
               Error_Msg_SC ("unexpected LIMITED ignored");
            end if;

            if Ada_Version < Ada_05 then
               Error_Msg_SP ("LIMITED WITH is an Ada 2005 extension");
               Error_Msg_SP
                 ("\unit must be compiled with -gnat05 switch");
            end if;

         elsif Token = Tok_Private then
            Has_Limited := False;
            Has_Private := True;
            Save_Scan_State (Scan_State);
            Scan;  -- past PRIVATE

            if Token /= Tok_With then

               --  Keyword is beginning of private child unit

               Restore_Scan_State (Scan_State); -- to PRIVATE
               return Item_List;

            elsif Ada_Version < Ada_05 then
               Error_Msg_SP ("PRIVATE WITH is an Ada 2005 extension");
               Error_Msg_SP
                 ("\unit must be compiled with -gnat05 switch");
            end if;

         else
            Has_Limited := False;
            Has_Private := False;
         end if;

         if Token = Tok_With then
            Scan; -- past WITH

            if Token = Tok_Type then

               --  WITH TYPE is an GNAT specific extension

               if not Extensions_Allowed then
                  Error_Msg_SP ("`WITH TYPE` is a 'G'N'A'T extension");
                  Error_Msg_SP ("\unit must be compiled with -gnatX switch");
               end if;

               Scan;  -- past TYPE
               With_Node := New_Node (N_With_Type_Clause, Token_Ptr);
               Append (With_Node, Item_List);
               Set_Name (With_Node, P_Qualified_Simple_Name);

               T_Is;

               if Token = Tok_Tagged then
                  Set_Tagged_Present (With_Node);
                  Scan;

               elsif Token = Tok_Access then
                  Scan;

               else
                  Error_Msg_SC ("expect tagged or access qualifier");
               end if;

               TF_Semicolon;

            else
               First_Flag := True;

               --  Loop through names in one with clause, generating a separate
               --  N_With_Clause node for each nam encountered.

               loop
                  With_Node := New_Node (N_With_Clause, Token_Ptr);
                  Append (With_Node, Item_List);

                  --  Note that we allow with'ing of child units, even in
                  --  Ada 83 mode, since presumably if this is not desired,
                  --  then the compilation of the child unit itself is the
                  --  place where such an "error" should be caught.

                  Set_Name (With_Node, P_Qualified_Simple_Name);
                  Set_First_Name (With_Node, First_Flag);
                  Set_Limited_Present (With_Node, Has_Limited);
                  Set_Private_Present (With_Node, Has_Private);
                  First_Flag := False;

                  --  All done if no comma

                  exit when Token /= Tok_Comma;

                  --  If comma is followed by compilation unit token
                  --  or by USE, or PRAGMA, then it should have been a
                  --  semicolon after all

                  Save_Scan_State (Scan_State);
                  Scan; -- past comma

                  if Token in Token_Class_Cunit
                    or else Token = Tok_Use
                    or else Token = Tok_Pragma
                  then
                     Restore_Scan_State (Scan_State);
                     exit;
                  end if;
               end loop;

               Set_Last_Name (With_Node, True);
               TF_Semicolon;
            end if;

         --  Processing for USE clause

         elsif Token = Tok_Use then
            Append (P_Use_Clause, Item_List);

         --  Anything else is end of context clause

         else
            exit;
         end if;
      end loop;

      return Item_List;
   end P_Context_Clause;

   --------------------------
   -- 10.1.2  Context Item --
   --------------------------

   --  Parsed by P_Context_Clause (10.1.2)

   -------------------------
   -- 10.1.2  With Clause --
   -------------------------

   --  Parsed by P_Context_Clause (10.1.2)

   -----------------------
   -- 10.1.3  Body Stub --
   -----------------------

   --  Subprogram stub parsed by P_Subprogram (6.1)
   --  Package stub parsed by P_Package (7.1)
   --  Task stub parsed by P_Task (9.1)
   --  Protected stub parsed by P_Protected (9.4)

   ----------------------------------
   -- 10.1.3  Subprogram Body Stub --
   ----------------------------------

   --  Parsed by P_Subprogram (6.1)

   -------------------------------
   -- 10.1.3  Package Body Stub --
   -------------------------------

   --  Parsed by P_Package (7.1)

   ----------------------------
   -- 10.1.3  Task Body Stub --
   ----------------------------

   --  Parsed by P_Task (9.1)

   ---------------------------------
   -- 10.1.3  Protected Body Stub --
   ---------------------------------

   --  Parsed by P_Protected (9.4)

   ---------------------
   -- 10.1.3  Subunit --
   ---------------------

   --  SUBUNIT ::= separate (PARENT_UNIT_NAME) PROPER_BODY

   --  PARENT_UNIT_NAME ::= NAME

   --  The caller has checked that the initial token is SEPARATE

   --  Error recovery: cannot raise Error_Resync

   function P_Subunit return Node_Id is
      Subunit_Node : Node_Id;
      Body_Node    : Node_Id;

   begin
      Subunit_Node := New_Node (N_Subunit, Token_Ptr);
      Body_Node := Error; -- in case no good body found
      Scan; -- past SEPARATE;

      T_Left_Paren;
      Set_Name (Subunit_Node, P_Qualified_Simple_Name);
      T_Right_Paren;

      if Token = Tok_Semicolon then
         Error_Msg_SC ("unexpected semicolon ignored");
         Scan;
      end if;

      if Token = Tok_Function or else Token = Tok_Procedure then
         Body_Node := P_Subprogram (Pf_Pbod);

      elsif Token = Tok_Package then
         Body_Node := P_Package (Pf_Pbod);

      elsif Token = Tok_Protected then
         Scan; -- past PROTECTED

         if Token = Tok_Body then
            Body_Node := P_Protected;
         else
            Error_Msg_AP ("BODY expected");
            return Error;
         end if;

      elsif Token = Tok_Task then
         Scan; -- past TASK

         if Token = Tok_Body then
            Body_Node := P_Task;
         else
            Error_Msg_AP ("BODY expected");
            return Error;
         end if;

      else
         Error_Msg_SC ("proper body expected");
         return Error;
      end if;

      Set_Proper_Body  (Subunit_Node, Body_Node);
      return Subunit_Node;

   end P_Subunit;

   ------------------
   -- Set_Location --
   ------------------

   function Set_Location return Source_Ptr is
      Physical   : Boolean;
      Loc        : Source_Ptr;
      Scan_State : Saved_Scan_State;

   begin
      --  A special check. If the first token is pragma, and this is a
      --  Source_Reference pragma, then do NOT eat previous comments, since
      --  the Source_Reference pragma is required to be the first line in
      --  the source file.

      if Token = Tok_Pragma then
         Save_Scan_State (Scan_State);
         Scan; --  past Pragma

         if Token = Tok_Identifier
           and then Token_Name = Name_Source_Reference
         then
            Restore_Scan_State (Scan_State);
            return Token_Ptr;
         end if;

         Restore_Scan_State (Scan_State);
      end if;

      --  Otherwise acquire previous comments and blank lines

      if Prev_Token = No_Token then
         return Source_First (Current_Source_File);

      else
         Loc := Prev_Token_Ptr;
         loop
            exit when Loc = Token_Ptr;

            --  Should we worry about UTF_32 line terminators here

            if Source (Loc) in Line_Terminator then
               Skip_Line_Terminators (Loc, Physical);
               exit when Physical;
            end if;

            Loc := Loc + 1;
         end loop;

         return Loc;
      end if;
   end Set_Location;

   ------------------
   -- Unit_Display --
   ------------------

   --  The format of the generated line, as expected by GNATCHOP is

   --    Unit {unit} line {line}, file offset {offs} [, SR], file name {file}

   --  where

   --     {unit}     unit name with terminating (spec) or (body)
   --     {line}     starting line number
   --     {offs}     offset to start of text in file
   --     {file}     source file name

   --  The SR parameter is present only if a source reference pragma was
   --  scanned for this unit. The significance is that gnatchop should not
   --  attempt to add another one.

   procedure Unit_Display
     (Cunit      : Node_Id;
      Loc        : Source_Ptr;
      SR_Present : Boolean)
   is
      Unum : constant Unit_Number_Type    := Get_Cunit_Unit_Number (Cunit);
      Sind : constant Source_File_Index   := Source_Index (Unum);
      Unam : constant Unit_Name_Type      := Unit_Name (Unum);

   begin
      if List_Units then
         Write_Str ("Unit ");
         Write_Unit_Name (Unit_Name (Unum));
         Unit_Location (Sind, Loc);

         if SR_Present then
            Write_Str (", SR");
         end if;

         Write_Str (", file name ");
         Write_Name (Get_File_Name (Unam, Nkind (Unit (Cunit)) = N_Subunit));
         Write_Eol;
      end if;
   end Unit_Display;

   -------------------
   -- Unit_Location --
   -------------------

   procedure Unit_Location (Sind : Source_File_Index; Loc : Source_Ptr) is
      Line : constant Logical_Line_Number := Get_Logical_Line_Number (Loc);
      --  Should the above be the physical line number ???

   begin
      Write_Str (" line ");
      Write_Int (Int (Line));

      Write_Str (", file offset ");
      Write_Int (Int (Loc) - Int (Source_First (Sind)));
   end Unit_Location;

end Ch10;