# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@


srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
DIST_COMMON = $(glibcxxinstall_HEADERS) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(top_srcdir)/fragment.am
subdir = libsupc++
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/enable.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/multi.m4 \
	$(top_srcdir)/../config/no-executables.m4 \
	$(top_srcdir)/../config/unwind_ipinfo.m4 \
	$(top_srcdir)/../libtool.m4 $(top_srcdir)/crossconfig.m4 \
	$(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/../config/tls.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(toolexeclibdir)" \
	"$(DESTDIR)$(glibcxxinstalldir)"
toolexeclibLTLIBRARIES_INSTALL = $(INSTALL)
LTLIBRARIES = $(noinst_LTLIBRARIES) $(toolexeclib_LTLIBRARIES)
libsupc___la_LIBADD =
am__libsupc___la_SOURCES_DIST = del_op.cc del_opnt.cc del_opv.cc \
	del_opvnt.cc eh_alloc.cc eh_arm.cc eh_aux_runtime.cc \
	eh_call.cc eh_catch.cc eh_exception.cc eh_globals.cc \
	eh_personality.cc eh_term_handler.cc eh_terminate.cc \
	eh_throw.cc eh_type.cc eh_unex_handler.cc guard.cc \
	new_handler.cc new_op.cc new_opnt.cc new_opv.cc new_opvnt.cc \
	pure.cc tinfo.cc tinfo2.cc vec.cc vterminate.cc cp-demangle.c
am__objects_1 = del_op.lo del_opnt.lo del_opv.lo del_opvnt.lo \
	eh_alloc.lo eh_arm.lo eh_aux_runtime.lo eh_call.lo eh_catch.lo \
	eh_exception.lo eh_globals.lo eh_personality.lo \
	eh_term_handler.lo eh_terminate.lo eh_throw.lo eh_type.lo \
	eh_unex_handler.lo guard.lo new_handler.lo new_op.lo \
	new_opnt.lo new_opv.lo new_opvnt.lo pure.lo tinfo.lo tinfo2.lo \
	vec.lo vterminate.lo
@GLIBCXX_HOSTED_TRUE@am__objects_2 = cp-demangle.lo
am_libsupc___la_OBJECTS = $(am__objects_1) $(am__objects_2)
libsupc___la_OBJECTS = $(am_libsupc___la_OBJECTS)
libsupc__convenience_la_LIBADD =
am__libsupc__convenience_la_SOURCES_DIST = del_op.cc del_opnt.cc \
	del_opv.cc del_opvnt.cc eh_alloc.cc eh_arm.cc \
	eh_aux_runtime.cc eh_call.cc eh_catch.cc eh_exception.cc \
	eh_globals.cc eh_personality.cc eh_term_handler.cc \
	eh_terminate.cc eh_throw.cc eh_type.cc eh_unex_handler.cc \
	guard.cc new_handler.cc new_op.cc new_opnt.cc new_opv.cc \
	new_opvnt.cc pure.cc tinfo.cc tinfo2.cc vec.cc vterminate.cc \
	cp-demangle.c
am_libsupc__convenience_la_OBJECTS = $(am__objects_1) $(am__objects_2)
libsupc__convenience_la_OBJECTS =  \
	$(am_libsupc__convenience_la_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
depcomp =
am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
SOURCES = $(libsupc___la_SOURCES) $(libsupc__convenience_la_SOURCES)
DIST_SOURCES = $(am__libsupc___la_SOURCES_DIST) \
	$(am__libsupc__convenience_la_SOURCES_DIST)
glibcxxinstallHEADERS_INSTALL = $(INSTALL_HEADER)
HEADERS = $(glibcxxinstall_HEADERS)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@
ACLOCAL = @ACLOCAL@
ALLOCATOR_H = @ALLOCATOR_H@
ALLOCATOR_NAME = @ALLOCATOR_NAME@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@
ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BASIC_FILE_CC = @BASIC_FILE_CC@
BASIC_FILE_H = @BASIC_FILE_H@
CC = @CC@
CCODECVT_CC = @CCODECVT_CC@
CCOLLATE_CC = @CCOLLATE_CC@
CCTYPE_CC = @CCTYPE_CC@
CFLAGS = @CFLAGS@
CLOCALE_CC = @CLOCALE_CC@
CLOCALE_H = @CLOCALE_H@
CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@
CMESSAGES_CC = @CMESSAGES_CC@
CMESSAGES_H = @CMESSAGES_H@
CMONEY_CC = @CMONEY_CC@
CNUMERIC_CC = @CNUMERIC_CC@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@
CSTDIO_H = @CSTDIO_H@
CTIME_CC = @CTIME_CC@
CTIME_H = @CTIME_H@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
C_INCLUDE_DIR = @C_INCLUDE_DIR@
DEBUG_FLAGS = @DEBUG_FLAGS@
DEFS = @DEFS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ENABLE_SYMVERS_DARWIN_FALSE = @ENABLE_SYMVERS_DARWIN_FALSE@
ENABLE_SYMVERS_DARWIN_TRUE = @ENABLE_SYMVERS_DARWIN_TRUE@
ENABLE_SYMVERS_FALSE = @ENABLE_SYMVERS_FALSE@
ENABLE_SYMVERS_GNU_FALSE = @ENABLE_SYMVERS_GNU_FALSE@
ENABLE_SYMVERS_GNU_NAMESPACE_FALSE = @ENABLE_SYMVERS_GNU_NAMESPACE_FALSE@
ENABLE_SYMVERS_GNU_NAMESPACE_TRUE = @ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@
ENABLE_SYMVERS_GNU_TRUE = @ENABLE_SYMVERS_GNU_TRUE@
ENABLE_SYMVERS_TRUE = @ENABLE_SYMVERS_TRUE@
ENABLE_VISIBILITY_FALSE = @ENABLE_VISIBILITY_FALSE@
ENABLE_VISIBILITY_TRUE = @ENABLE_VISIBILITY_TRUE@
EXEEXT = @EXEEXT@
EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@
GLIBCXX_BUILD_DEBUG_FALSE = @GLIBCXX_BUILD_DEBUG_FALSE@
GLIBCXX_BUILD_DEBUG_TRUE = @GLIBCXX_BUILD_DEBUG_TRUE@
GLIBCXX_BUILD_PCH_FALSE = @GLIBCXX_BUILD_PCH_FALSE@
GLIBCXX_BUILD_PCH_TRUE = @GLIBCXX_BUILD_PCH_TRUE@
GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE = @GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE@
GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE = @GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE@
GLIBCXX_C_HEADERS_C_FALSE = @GLIBCXX_C_HEADERS_C_FALSE@
GLIBCXX_C_HEADERS_C_STD_FALSE = @GLIBCXX_C_HEADERS_C_STD_FALSE@
GLIBCXX_C_HEADERS_C_STD_TRUE = @GLIBCXX_C_HEADERS_C_STD_TRUE@
GLIBCXX_C_HEADERS_C_TRUE = @GLIBCXX_C_HEADERS_C_TRUE@
GLIBCXX_HOSTED_FALSE = @GLIBCXX_HOSTED_FALSE@
GLIBCXX_HOSTED_TRUE = @GLIBCXX_HOSTED_TRUE@
GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@
GLIBCXX_LDBL_COMPAT_FALSE = @GLIBCXX_LDBL_COMPAT_FALSE@
GLIBCXX_LDBL_COMPAT_TRUE = @GLIBCXX_LDBL_COMPAT_TRUE@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LIBICONV = @LIBICONV@
LIBMATHOBJS = @LIBMATHOBJS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
OBJEXT = @OBJEXT@
OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@
OPT_LDFLAGS = @OPT_LDFLAGS@
OS_INC_SRCDIR = @OS_INC_SRCDIR@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SECTION_FLAGS = @SECTION_FLAGS@
SECTION_LDFLAGS = @SECTION_LDFLAGS@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
SYMVER_FILE = @SYMVER_FILE@
TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_FLAGS = @WARN_FLAGS@
WERROR = @WERROR@
ac_ct_AR = @ac_ct_AR@
ac_ct_AS = @ac_ct_AS@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
baseline_dir = @baseline_dir@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
check_msgfmt = @check_msgfmt@
datadir = @datadir@
enable_shared = @enable_shared@
enable_static = @enable_static@
exec_prefix = @exec_prefix@
glibcxx_MOFILES = @glibcxx_MOFILES@
glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@
glibcxx_POFILES = @glibcxx_POFILES@
glibcxx_builddir = @glibcxx_builddir@
glibcxx_localedir = @glibcxx_localedir@
glibcxx_prefixdir = @glibcxx_prefixdir@
glibcxx_srcdir = @glibcxx_srcdir@
glibcxx_thread_h = @glibcxx_thread_h@
glibcxx_toolexecdir = @glibcxx_toolexecdir@
glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@
gxx_include_dir = @gxx_include_dir@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libtool_VERSION = @libtool_VERSION@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
oldincludedir = @oldincludedir@
port_specific_symbol_files = @port_specific_symbol_files@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
toplevel_srcdir = @toplevel_srcdir@

# May be used by various substitution variables.
gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
MAINT_CHARSET = latin1
mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
PWD_COMMAND = $${PWDCMD-pwd}
STAMP = echo timestamp >
toolexecdir = $(glibcxx_toolexecdir)
toolexeclibdir = $(glibcxx_toolexeclibdir)

# These bits are all figured out from configure.  Look in acinclude.m4
# or configure.ac to see how they are set.  See GLIBCXX_EXPORT_FLAGS.
CONFIG_CXXFLAGS = \
	$(SECTION_FLAGS) $(EXTRA_CXX_FLAGS)

WARN_CXXFLAGS = \
	$(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once


# -I/-D flags to pass when compiling.
AM_CPPFLAGS = $(GLIBCXX_INCLUDES)

# Need this library to both be part of libstdc++.a, and installed
# separately too.
# 1) separate libsupc++.la
toolexeclib_LTLIBRARIES = libsupc++.la
# 2) integrated libsupc++convenience.la that is to be a part of libstdc++.a
noinst_LTLIBRARIES = libsupc++convenience.la
headers = \
	exception new typeinfo cxxabi.h exception_defines.h

@GLIBCXX_HOSTED_TRUE@c_sources = \
@GLIBCXX_HOSTED_TRUE@	cp-demangle.c 

sources = \
	del_op.cc \
	del_opnt.cc \
	del_opv.cc \
	del_opvnt.cc \
	eh_alloc.cc \
	eh_arm.cc \
	eh_aux_runtime.cc \
	eh_call.cc \
	eh_catch.cc \
	eh_exception.cc \
	eh_globals.cc \
	eh_personality.cc \
	eh_term_handler.cc \
	eh_terminate.cc \
	eh_throw.cc \
	eh_type.cc \
	eh_unex_handler.cc \
	guard.cc \
	new_handler.cc \
	new_op.cc \
	new_opnt.cc \
	new_opv.cc \
	new_opvnt.cc \
	pure.cc \
	tinfo.cc \
	tinfo2.cc \
	vec.cc \
	vterminate.cc

libsupc___la_SOURCES = $(sources) $(c_sources)
libsupc__convenience_la_SOURCES = $(sources) $(c_sources)
glibcxxinstalldir = $(gxx_include_dir)
glibcxxinstall_HEADERS = $(headers)

# AM_CXXFLAGS needs to be in each subdirectory so that it can be
# modified in a per-library or per-sub-library way.  Need to manually
# set this option because CONFIG_CXXFLAGS has to be after
# OPTIMIZE_CXXFLAGS on the compile line so that -O2 can be overridden
# as the occasion call for it.
AM_CXXFLAGS = \
	-fno-implicit-templates \
	$(LIBSUPCXX_PICFLAGS) \
	$(WARN_CXXFLAGS) \
	$(OPTIMIZE_CXXFLAGS) \
	$(CONFIG_CXXFLAGS)

AM_MAKEFLAGS = \
	"gxx_include_dir=$(gxx_include_dir)"


# Use special rules for pulling things out of libiberty.  These
# objects should be compiled with the "C" compiler, not the C++
# compiler, and also should not use the C++ includes.
C_INCLUDES = -I.. -I$(toplevel_srcdir)/libiberty -I$(toplevel_srcdir)/include
C_COMPILE = \
	$(CC) $(DEFS) $(C_INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)


# LTCOMPILE is copied from LTCXXCOMPILE below.
LTCOMPILE = $(LIBTOOL) --tag CC --tag disable-shared --mode=compile $(CC) \
	    $(DEFS) $(C_INCLUDES) $(LIBSUPCXX_PICFLAGS) \
            $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)


# libstdc++ libtool notes

# 1) Need to explicitly set LTCXXCOMPILE so that AM_CXXFLAGS is
# last. (That way, things like -O2 passed down from the toplevel can
# be overridden by --enable-debug.)

# 2) In general, libtool expects an argument such as `--tag=CXX' when
# using the C++ compiler, because that will enable the settings
# detected when C++ support was being configured.  However, when no
# such flag is given in the command line, libtool attempts to figure
# it out by matching the compiler name in each configuration section
# against a prefix of the command line.  The problem is that, if the
# compiler name and its initial flags stored in the libtool
# configuration file don't match those in the command line, libtool
# can't decide which configuration to use, and it gives up.  The
# correct solution is to add `--tag CXX' to LTCXXCOMPILE and maybe
# CXXLINK, just after $(LIBTOOL), so that libtool doesn't have to
# attempt to infer which configuration to use.
#
# We have to put --tag disable-shared after --tag CXX lest things
# CXX undo the affect of disable-shared.
LTCXXCOMPILE = $(LIBTOOL) --tag CXX --tag disable-shared \
	       --mode=compile $(CXX) $(TOPLEVEL_INCLUDES) \
	       $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) 

LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/../libtool-ldflags $(LDFLAGS))

# 3) We'd have a problem when building the shared libstdc++ object if
# the rules automake generates would be used.  We cannot allow g++ to
# be used since this would add -lstdc++ to the link line which of
# course is problematic at this point.  So, we get the top-level
# directory to configure libstdc++-v3 to use gcc as the C++
# compilation driver.
CXXLINK = $(LIBTOOL) --tag CXX --tag disable-shared \
	  --mode=link $(CXX) \
	  $(OPT_LDFLAGS) $(SECTION_LDFLAGS) $(AM_CXXFLAGS) $(LTLDFLAGS) -o $@

all: all-am

.SUFFIXES:
.SUFFIXES: .c .cc .lo .o .obj
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  --ignore-deps libsupc++/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  --ignore-deps libsupc++/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

clean-noinstLTLIBRARIES:
	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
	@list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	test -z "$(toolexeclibdir)" || $(mkdir_p) "$(DESTDIR)$(toolexeclibdir)"
	@list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    f=$(am__strip_dir) \
	    echo " $(LIBTOOL) --mode=install $(toolexeclibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(toolexeclibdir)/$$f'"; \
	    $(LIBTOOL) --mode=install $(toolexeclibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(toolexeclibdir)/$$f"; \
	  else :; fi; \
	done

uninstall-toolexeclibLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@set -x; list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
	  p=$(am__strip_dir) \
	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$p'"; \
	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$p"; \
	done

clean-toolexeclibLTLIBRARIES:
	-test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES)
	@list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
libsupc++.la: $(libsupc___la_OBJECTS) $(libsupc___la_DEPENDENCIES) 
	$(CXXLINK) -rpath $(toolexeclibdir) $(libsupc___la_LDFLAGS) $(libsupc___la_OBJECTS) $(libsupc___la_LIBADD) $(LIBS)
libsupc++convenience.la: $(libsupc__convenience_la_OBJECTS) $(libsupc__convenience_la_DEPENDENCIES) 
	$(CXXLINK)  $(libsupc__convenience_la_LDFLAGS) $(libsupc__convenience_la_OBJECTS) $(libsupc__convenience_la_LIBADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

.c.o:
	$(COMPILE) -c $<

.c.obj:
	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
	$(LTCOMPILE) -c -o $@ $<

.cc.o:
	$(CXXCOMPILE) -c -o $@ $<

.cc.obj:
	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.cc.lo:
	$(LTCXXCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(mkdir_p) $(distdir)/..
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(LTLIBRARIES) $(HEADERS)
installdirs:
	for dir in "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(glibcxxinstalldir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
	clean-toolexeclibLTLIBRARIES mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-libtool distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-glibcxxinstallHEADERS

install-exec-am: install-toolexeclibLTLIBRARIES

install-info: install-info-am

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-glibcxxinstallHEADERS uninstall-info-am \
	uninstall-toolexeclibLTLIBRARIES

.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
	clean-libtool clean-noinstLTLIBRARIES \
	clean-toolexeclibLTLIBRARIES ctags distclean distclean-compile \
	distclean-generic distclean-libtool distclean-tags distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-exec install-exec-am \
	install-glibcxxinstallHEADERS install-info install-info-am \
	install-man install-strip install-toolexeclibLTLIBRARIES \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags uninstall uninstall-am uninstall-glibcxxinstallHEADERS \
	uninstall-info-am uninstall-toolexeclibLTLIBRARIES


cp-demangle.c:
	rm -f $@
	$(LN_S) $(toplevel_srcdir)/libiberty/cp-demangle.c $@
cp-demangle.lo: cp-demangle.c
	$(LTCOMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $<
cp-demangle.o: cp-demangle.c
	$(C_COMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $<

# We have to have rules modified from the default to counteract SUN make
# prepending each of $(glibcxxinstall_HEADERS) with VPATH below.
install-glibcxxinstallHEADERS: $(glibcxxinstall_HEADERS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(glibcxxinstalldir)
	@list='$(glibcxxinstall_HEADERS)'; for p in $$list; do \
	  q=`echo $$p | sed -e 's,.*/,,'`; \
	  if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(glibcxxinstalldir)/$$q"; \
	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(glibcxxinstalldir)/$$q; \
	done

uninstall-glibcxxinstallHEADERS:
	@$(NORMAL_UNINSTALL)
	list='$(glibcxxinstall_HEADERS)'; for p in $$list; do \
	  q=`echo $$p | sed -e 's,.*/,,'`; \
	  rm -f $(DESTDIR)$(glibcxxinstalldir)/$$q; \
	done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: