2006-12-18  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libfortran/30145
	* io/transfer.c (transfer_array):  Check for negative extent.

2006-12-15  Richard Guenther  <rguenther@suse.de>

	Backport from mainline:
	2006-12-13  Richard Guenther  <rguenther@suse.de>

	PR fortran/30115
	* runtime/memory.c (allocate_size): Change interface to
	void *()(size_t, GFC_INTEGER_4 *).
	(allocate): Likewise.
	(allocate64): Likewise.
	(allocate_array): Change interface to
	void *()(void *, size_t, GFC_INTEGER_4 *).
	(allocate64_array): Likewise.
	(deallocate): Change interface to
	void ()(void *, GFC_INTEGER_4 *).

2006-12-10  Thomas Koenig  <Thomas.Koenig@online.de>

	PR libfortran/29568
	* libgfortran/libgfortran.h (compile_options_t):  Add
	record_marker. (top level):  Define GFC_MAX_SUBRECORD_LENGTH.
	* runtime/compile_options.c (set_record_marker):  Change
	default to four-byte record marker.
	(set_max_subrecord_length):  New function.
	* runtime/error.c (translate_error):  Change error message
	for short record on unformatted read.
	* io/io.h (gfc_unit):  Add recl_subrecord, bytes_left_subrecord
	and continued.
	* io/file_pos.c (unformatted_backspace):  Change default of record
	marker size to four bytes.  Loop over subrecords.
	* io/open.c:  Default recl is max_offset.  If
	compile_options.max_subrecord_length has been set, set set
	u->recl_subrecord to its value, to the maximum value otherwise.
	* io/transfer.c (top level):  Add prototypes for us_read, us_write,
	next_record_r_unf and next_record_w_unf.
	(read_block_direct):  Separate codepaths for unformatted direct
	and unformatted sequential.  If a recl has been set by the
	user, use the number of bytes left for the record if it is smaller
	than the read request.  Loop over subrecords.  Set an error if the
	user has set a recl and the read was short.
	(write_buf):  Separate codepaths for unformatted direct and
	unformatted sequential. If a recl has been set by the
	user, use the number of bytes left for the record if it is smaller
	than the read request.  Loop over subrecords.  Set an error if the
	user has set a recl and the read was short.
	(us_read):  Add parameter continued (to indicate that bytes_left
	should not be intialized).  Change default of record marker size
	to four bytes. Use subrecord.  If the subrecord length is smaller than
	zero, this indicates a continuation.
	(us_write):  Add parameter continued (to indicate that the continued
	flag should be set).  Use subrecord.
	(pre_position):  Use 0 for continued on us_write and us_read calls.
	(skip_record):  New function.
	(next_record_r_unf):  New function.
	(next_record_r):  Use next_record_r_unf.
	(write_us_marker):  Default size for record markers is four bytes.
	(next_record_w_unf):  New function.
	(next_record_w):  Use next_record_w_unf.
	PR libfortran/30009
	PR libfortran/30056
	* libgfortran.h:  Add ERROR_CORRUPT_FILE to error_codes.
	* runtime/error.c (translate_error):  Add handling for
	ERROR_CORRUPT_FILE.
	* io/transfer.c (read_block_direct):  Add comment about
	EOR for stream files.
	Remove test for no bytes left for direct access files.
	Generate an ERROR_SHORT_RECORD if the read was short.
	For unformatted sequential files:  Check endfile condition.
	Remove test for no bytes left.  End of file here means
	that the file structure has been corrupted.  Pre-position
	the file for the next record in case of error.
	(write_buf):  Whitespace fix.  Subtract the number of bytes
	written from bytes_left.

2006-12-06  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	PR libfortran/29810
	* intrinsics/c99_functions.c (fmodf, fmodl, floorl): New functions.
	* c99_protos.h (fmodf, fmodl, floorl): New prototypes.
	* configure.ac: Check for fmodf, fmod and fmodl.
	* configure: Regenerate.
	* config.h.in: Regenerate.
	* aclocal.m4: Regenerate.
	* Makefile.in: Regenerate.

2006-11-24  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/29936
	* io/io.h (unit_flags): Add new flag has_recl.
	* io.open.c (new_unit): Set flag if RECL= was specified.
	* io/transfer.c (us_write): If flag set, leave recl as initialized by
	new_unit.

2006-11-13  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	PR libfortran/27895
	* intrinsics/reshape_generic.c (reshape_internal): Fix so that it
	works correctly for zero-sized arrays.
	* m4/reshape.m4: Likewise.
	* generated/reshape_r16.c: Regenerate.
	* generated/reshape_c4.c: Regenerate.
	* generated/reshape_i4.c: Regenerate.
	* generated/reshape_c16.c: Regenerate.
	* generated/reshape_r10.c: Regenerate.
	* generated/reshape_r8.c: Regenerate.
	* generated/reshape_c10.c: Regenerate.
	* generated/reshape_c8.c: Regenerate.
	* generated/reshape_i8.c: Regenerate.
	* generated/reshape_i16.c: Regenerate.
	* generated/reshape_r4.c: Regenerate.

2006-11-08  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/29752
	* io/transfer.c (finalize_transfer): Flush on ADVANCE_NO.

2006-11-05  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/25545
	* io/transfer.c (write_block): Cleanup code paths between
	stream and non-stream I/O.
	(write_buf):  Cleanup.
	(read_block): Cleanup.
	(finalize_transfer): Call next_record for '$' edit descriptor handling
	of internal unit. Cleanup code for readability.

2006-11-03  Thomas Koenig  <Thomas.Koenig@online.de>

	PR libfortran/29627
	Backport from trunk
	* libgfortran.h: Add ERROR_SHORT_RECORD
	* runtime/error.c (translate_error): Add case
	for ERROR_SHORT_RECORD.
	* io/transfer.c (read_block_direct):  Separate codepaths
	for stream and record unformatted I/O.  Remove unneeded
	tests for standard input, padding and formatted I/O.
	If the record is short, read in as much data as possible,
	then raise the error.

2006-10-26  Tobias Burnus  <burnus@net-b.de>

	PR fortran/29452
	* runtime/string.c (compare0): Check whether string lengths match.

2006-10-26  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/29563
	* io/io.h (st_parameter_dt): Add new flag at_eof.
	* io/list_read.c (next_char): Set flag when EOF and return '\n' to
	signal EOR.  Check flag on next call and jump out.
	* io/unit.c (get_internal_unit): Initialize new flag.

2006-10-20  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	* generated/minval_r8.c: Regenerate.
	* generated/maxloc1_4_r8.c: Regenerate.
	* generated/minloc1_16_r16.c: Regenerate.
	* generated/sum_i8.c: Regenerate.
	* generated/eoshift3_4.c: Regenerate.
	* generated/any_l16.c: Regenerate.
	* generated/eoshift1_8.c: Regenerate.
	* generated/reshape_r16.c: Regenerate.
	* generated/product_r4.c: Regenerate.
	* generated/maxloc1_8_i4.c: Regenerate.
	* generated/maxloc0_4_r4.c: Regenerate.
	* generated/in_unpack_i8.c: Regenerate.
	* generated/minloc0_4_r16.c: Regenerate.
	* generated/reshape_c4.c: Regenerate.
	* generated/maxloc0_4_r16.c: Regenerate.
	* generated/minloc1_8_r16.c: Regenerate.
	* generated/maxloc1_8_r16.c: Regenerate.
	* generated/in_unpack_i16.c: Regenerate.
	* generated/maxloc0_8_i8.c: Regenerate.
	* generated/sum_r16.c: Regenerate.
	* generated/minloc1_4_r8.c: Regenerate.
	* generated/maxloc1_16_r16.c: Regenerate.
	* generated/minloc1_16_i4.c: Regenerate.
	* generated/maxloc1_16_i4.c: Regenerate.
	* generated/minloc0_16_i8.c: Regenerate.
	* generated/maxloc0_16_i8.c: Regenerate.
	* generated/maxval_r16.c: Regenerate.
	* generated/count_16_l16.c: Regenerate.
	* generated/count_8_l8.c: Regenerate.
	* generated/product_c10.c: Regenerate.
	* generated/minloc1_8_i4.c: Regenerate.
	* generated/minloc0_16_i16.c: Regenerate.
	* generated/eoshift1_16.c: Regenerate.
	* generated/minloc0_4_r4.c: Regenerate.
	* generated/product_c4.c: Regenerate.
	* generated/sum_r4.c: Regenerate.
	* generated/in_pack_c16.c: Regenerate.
	* generated/reshape_i4.c: Regenerate.
	* generated/minloc0_8_i8.c: Regenerate.
	* generated/minloc1_16_r10.c: Regenerate.
	* generated/in_pack_c4.c: Regenerate.
	* generated/all_l16.c: Regenerate.
	* generated/reshape_c16.c: Regenerate.
	* generated/maxloc1_8_r8.c: Regenerate.
	* generated/minval_i16.c: Regenerate.
	* generated/reshape_r10.c: Regenerate.
	* generated/maxval_i4.c: Regenerate.
	* generated/any_l4.c: Regenerate.
	* generated/minval_i8.c: Regenerate.
	* generated/maxloc1_4_i8.c: Regenerate.
	* generated/maxloc0_16_i16.c: Regenerate.
	* generated/maxloc0_8_r4.c: Regenerate.
	* generated/minloc1_4_i16.c: Regenerate.
	* generated/minloc0_4_r10.c: Regenerate.
	* generated/maxloc1_4_i16.c: Regenerate.
	* generated/minloc0_8_i16.c: Regenerate.
	* generated/maxloc0_4_r10.c: Regenerate.
	* generated/maxloc0_8_i16.c: Regenerate.
	* generated/minloc1_8_r10.c: Regenerate.
	* generated/product_i4.c: Regenerate.
	* generated/minloc0_16_r4.c: Regenerate.
	* generated/sum_c16.c: Regenerate.
	* generated/maxloc1_8_r10.c: Regenerate.
	* generated/maxloc0_16_r4.c: Regenerate.
	* generated/minloc1_16_r8.c: Regenerate.
	* generated/maxloc0_4_i4.c: Regenerate.
	* generated/maxloc1_16_r8.c: Regenerate.
	* generated/cshift1_4.c: Regenerate.
	* generated/sum_r10.c: Regenerate.
	* generated/sum_c4.c: Regenerate.
	* generated/maxloc1_16_r10.c: Regenerate.
	* generated/count_4_l16.c: Regenerate.
	* generated/in_pack_i4.c: Regenerate.
	* generated/minloc1_8_r8.c: Regenerate.
	* generated/count_4_l4.c: Regenerate.
	* generated/maxval_r10.c: Regenerate.
	* generated/minloc1_4_i8.c: Regenerate.
	* generated/in_unpack_c4.c: Regenerate.
	* generated/minloc0_8_r4.c: Regenerate.
	* generated/product_i16.c: Regenerate.
	* generated/minloc0_16_r16.c: Regenerate.
	* generated/reshape_r8.c: Regenerate.
	* generated/all_l4.c: Regenerate.
	* generated/in_pack_c10.c: Regenerate.
	* generated/minloc0_4_i4.c: Regenerate.
	* generated/reshape_c10.c: Regenerate.
	* generated/minval_r4.c: Regenerate.
	* generated/maxloc1_4_r4.c: Regenerate.
	* generated/sum_i4.c: Regenerate.
	* generated/count_16_l8.c: Regenerate.
	* generated/maxval_r8.c: Regenerate.
	* generated/eoshift1_4.c: Regenerate.
	* generated/eoshift3_8.c: Regenerate.
	* generated/minval_r16.c: Regenerate.
	* generated/product_r8.c: Regenerate.
	* generated/maxloc1_8_i8.c: Regenerate.
	* generated/maxloc0_4_r8.c: Regenerate.
	* generated/maxloc0_16_r16.c: Regenerate.
	* generated/in_unpack_i4.c: Regenerate.
	* generated/sum_c10.c: Regenerate.
	* generated/minloc1_4_r16.c: Regenerate.
	* generated/maxloc1_4_r16.c: Regenerate.
	* generated/in_unpack_c16.c: Regenerate.
	* generated/minloc0_8_r16.c: Regenerate.
	* generated/reshape_c8.c: Regenerate.
	* generated/maxloc0_8_r16.c: Regenerate.
	* generated/maxloc0_8_i4.c: Regenerate.
	* generated/minloc1_4_r4.c: Regenerate.
	* generated/minloc0_16_i4.c: Regenerate.
	* generated/maxloc0_16_i4.c: Regenerate.
	* generated/minloc1_16_i8.c: Regenerate.
	* generated/maxloc1_16_i8.c: Regenerate.
	* generated/count_8_l4.c: Regenerate.
	* generated/minloc0_16_r10.c: Regenerate.
	* generated/minloc1_8_i8.c: Regenerate.
	* generated/minloc0_4_r8.c: Regenerate.
	* generated/product_r16.c: Regenerate.
	* generated/product_c8.c: Regenerate.
	* generated/sum_r8.c: Regenerate.
	* generated/in_pack_i16.c: Regenerate.
	* generated/minloc0_8_i4.c: Regenerate.
	* generated/minloc1_16_i16.c: Regenerate.
	* generated/reshape_i8.c: Regenerate.
	* generated/in_pack_c8.c: Regenerate.
	* generated/maxloc1_8_r4.c: Regenerate.
	* generated/reshape_i16.c: Regenerate.
	* generated/minval_r10.c: Regenerate.
	* generated/minval_i4.c: Regenerate.
	* generated/maxloc1_4_i4.c: Regenerate.
	* generated/maxval_i8.c: Regenerate.
	* generated/eoshift3_16.c: Regenerate.
	* generated/any_l8.c: Regenerate.
	* generated/maxloc0_16_r10.c: Regenerate.
	* generated/minloc0_4_i16.c: Regenerate.
	* generated/maxloc0_8_r8.c: Regenerate.
	* generated/maxloc0_4_i16.c: Regenerate.
	* generated/minloc1_4_r10.c: Regenerate.
	* generated/minloc1_8_i16.c: Regenerate.
	* generated/maxloc1_4_r10.c: Regenerate.
	* generated/minloc0_8_r10.c: Regenerate.
	* generated/maxloc1_8_i16.c: Regenerate.
	* generated/in_unpack_c10.c: Regenerate.
	* generated/maxloc0_8_r10.c: Regenerate.
	* generated/minloc1_16_r4.c: Regenerate.
	* generated/maxloc1_16_r4.c: Regenerate.
	* generated/minloc0_16_r8.c: Regenerate.
	* generated/product_i8.c: Regenerate.
	* generated/maxloc0_16_r8.c: Regenerate.
	* generated/sum_i16.c: Regenerate.
	* generated/maxloc0_4_i8.c: Regenerate.
	* generated/cshift1_8.c: Regenerate.
	* generated/maxloc1_16_i16.c: Regenerate.
	* generated/minloc1_8_r4.c: Regenerate.
	* generated/sum_c8.c: Regenerate.
	* generated/count_8_l16.c: Regenerate.
	* generated/in_pack_i8.c: Regenerate.
	* generated/maxval_i16.c: Regenerate.
	* generated/count_4_l8.c: Regenerate.
	* generated/minloc1_4_i4.c: Regenerate.
	* generated/product_c16.c: Regenerate.
	* generated/reshape_r4.c: Regenerate.
	* generated/minloc0_8_r8.c: Regenerate.
	* generated/in_unpack_c8.c: Regenerate.
	* generated/product_r10.c: Regenerate.
	* generated/cshift1_16.c: Regenerate.
	* generated/all_l8.c: Regenerate.
	* generated/minloc0_4_i8.c: Regenerate.
	* generated/maxval_r4.c: Regenerate.
	* generated/count_16_l4.c: Regenerate.

2006-10-19  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	PR libfortran/27895
	* intrinsics/cshift0.c: Special cases for zero-sized arrays.
	* intrinsics/pack_generic.c: Likewise.
	* intrinsics/spread_generic.c: Likewise.

2006-10-18  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/29277
	* io/write.c (write_a): Add conversion of LF to CR-LF for systems with
	#define HAVE_CRLF.

2006-10-18  Tobias Burnus  <burnus@net-b.de>

	* m4/in_pack.m4: Fixed a typo.
	* m4/iforeach.m4: Fixed a typo.
	* m4/eoshift1.m4: Fixed a typo.
	* m4/eoshift3.m4: Fixed a typo.
	* m4/cshift1.m4: Fixed a typo.
	* m4/in_unpack.m4: Fixed a typo.
	* m4/reshape.m4: Fixed a typo.
	* m4/ifunction.m4: Fixed a typo.
	* runtime/environ.c: Fixed a typo.
	* runtime/in_pack_generic.c: Fixed a typo.
	* runtime/in_unpack_generic.c: Fixed a typo.
	* runtime/memory.c: Fixed a typo.
	* intrinsics/cshift0.c: Fixed a typo.
	* intrinsics/cpu_time.c: Fixed a typo.
	* intrinsics/pack_generic.c: Fixed a typo.
	* intrinsics/unpack_generic.c: Fixed a typo.
	* intrinsics/eoshift0.c: Fixed a typo.
	* intrinsics/eoshift2.c: Fixed a typo.
	* intrinsics/reshape_generic.c: Fixed a typo.
	* io/open.c: Fixed a typo.
	* io/list_read.c: Fixed a typo.
	* io/io.h: Fixed a typo.
	* io/transfer.c: Fixed a typo.
	* io/write.c: Fixed a typo.

2006-10-17  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/29277
	* io/list_read.c (next_char): Update strm_pos.
	(eat_separator): Delete extra call to unget_char.
	* io/transfer.c (read_block): Use read_sf for formatted stream I/O.
	(next_record_r): Update strm_pos for formatted stream I/O and handle
	end-of-record correctly.
	(next_record_w): Ditto.
	(next_record): Enable next record (r/w) functions and update strm_pos.
	(finalize_transfer): Call next_record to finish the record.

2006-10-13  Steven G. Kargl  <kargl@gcc.gnu.org>

	* m4/spacing.m4: Use scalbn[f,l] if ldexp[f,l] is unavailable.
	* m4/rrspacing.m4: Ditto.
	* generated/spacing_r4.c: Regenerated.
	* generated/spacing_r8.c: Ditto.
	* generated/spacing_r10.c: Ditto.
	* generated/spacing_r16.c: Ditto.
	* generated/rrspacing_r4.c: Ditto.
	* generated/rrspacing_r8.c: Ditto.
	* generated/rrspacing_r10.c: Ditto.
	* generated/rrspacing_r16.c: Ditto.

2006-10-06  Steven G. Kargl  <kargl@gcc.gnu.org>

	PR fortran/15441
	PR fortran/29312
	* configure.ac: Add HAVE_LDEXPF, HAVE_LDEXP, and HAVE_LDEXPL
	* m4/spacing.m4: New file.  Use new HAVE_* defines.
	* m4/rrspacing.m4: Ditto.
	* Makefile.am: Handle new files.
	* configure: Regenerated.
	* Makefile.in: Ditto.
	* config.h.in: Ditto.
	* generated/spacing_r4.c: Generated.
	* generated/spacing_r8.c: Ditto.
	* generated/spacing_r10.c: Ditto.
	* generated/spacing_r16.c: Ditto.
	* generated/rrspacing_r4.c: Ditto.
	* generated/rrspacing_r8.c: Ditto.
	* generated/rrspacing_r10.c: Ditto.
	* generated/rrspacing_r16.c: Ditto.

2006-10-08  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	* intrinsics/hyper.c: Remove file.
	* intrinsics/c99_functions.c: Add fallback functions asinhf,
	acoshf and atanhf.
	* Makefile.am: Remove file intrinsics/hyper.c.
	* Makefile.in: Regenerate.

2006-10-08  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	* c99_protos.h: Correctly protect definitions of prototypes for
	asinhf, acoshf and atanhf to be the same as in intrinsics/hyper.c.

2006-10-08  Paul Thomas  <pault@gcc.gnu.org>
	    Erik Edelmann  <edelmann@gcc.gnu.org>

	PR libgfortran/20541
	* Makefile.in : Add move_alloc.
	* intrinsics/move_alloc.c: New function.
	* Makefile.am : Add move_alloc.

2006-10-08  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	PR libfortran/26540
	* intrinsics/signal.c (signal_sub, signal_sub_int): Use intptr_t
	if available to cast function pointers to int and back.
	* configure.ac: Check for intptr_t.
	* config.h.in: Regenerate.
	* configure: Regenerate.

2006-10-01  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	PR fortran/16580
	PR fortran/29288
	* libgfortran/Makefile.am: Add the new files to the build
	process, and rules to build them.
	* libgfortran/Makefile.in: Regenerate.
	* libgfortran/m4/misc_specifics.m4: New file.
	* libgfortran/m4/specific.m4: Add new special cases for function
	with complex argument and real result, like abs_c* and aimag_c*.
	* libgfortran/intrinsics/f2c_specifics.F90: Add specifics for
	AIMAG, ASINH, ACOSH and ATANH.
	* libgfortran/generated/_aimag_c4.F90: New file.
	* libgfortran/generated/_aimag_c8.F90: New file.
	* libgfortran/generated/_asinh_r10.F90: New file.
	* libgfortran/generated/_acosh_r16.F90: New file.
	* libgfortran/generated/_aimag_c10.F90: New file.
	* libgfortran/generated/_atanh_r16.F90: New file.
	* libgfortran/generated/_acosh_r4.F90: New file.
	* libgfortran/generated/_acosh_r8.F90: New file.
	* libgfortran/generated/_asinh_r4.F90: New file.
	* libgfortran/generated/_asinh_r8.F90: New file.
	* libgfortran/generated/_asinh_r16.F90: New file.
	* libgfortran/generated/_atanh_r4.F90: New file.
	* libgfortran/generated/_atanh_r8.F90: New file.
	* libgfortran/generated/_acosh_r10.F90: New file.
	* libgfortran/generated/misc_specifics.F90: New file.
	* libgfortran/generated/_aimag_c16.F90: New file.
	* libgfortran/generated/_atanh_r10.F90: New file.

2006-10-05  Danny Smith  <dannysmith@users.sourceforge.net>

	* acinclude.m4 (HAVE_ATTRIBUTE_ALIAS): Remove __USER_LABEL_PREFIX__
	from test.
	* configure: Regenerate.

2006-10-05  Steven G. Kargl  <kargl@gcc.gnu.org>

	* Makefile.am: Use $(M4) instead of m4.
	* Makefile.in: Regenerated.

2006-10-01  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	* libgfortran.h: Add prototype for internal_unpack_c16.

2006-09-29  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	PR libfortran/18791
	* m4/specific.m4: Special-case cabs so that its return type is
	real. Special-case conjg so that their suffices are _4, _8, _10 and
	_16 instead of _c4, _c8, _c10 and _c16.
	* intrinsics/f2c_specifics.F90: Special-case conjg functions so
	that their suffices are _4 and _8 instead of _c4 and _c8.
	* generated/_conjg_c4.F90: Regenerate.
	* generated/_conjg_c8.F90: Regenerate.
	* generated/_conjg_c10.F90: Regenerate.
	* generated/_conjg_c16.F90: Regenerate.
	* generated/_abs_c4.F90: Regenerate.
	* generated/_abs_c8.F90: Regenerate.
	* generated/_abs_c10.F90: Regenerate.
	* generated/_abs_c16.F90: Regenerate.

2006-09-29  Steven G. Kargl  <kargl@gcc.gnu.org>

	* intrinsics/cpu_time.c:  Add cpu_time_10 and cpu_time_16 routines.

2006-09-28  Francois-Xavier Coudert  <coudert@clipper.ens.fr>
D
	* Makefile.am: Install libgfortranbegin inside compiler libraries
	directory instead of system libraries directory.
	* Makefile.in: Regenerate.

2006-09-24  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	* Makefile.am: Remove dependency on gfortypes.h.
	* Makefile.in: Regenerate.

2006-09-22  Danny Smith  <dannysmith@users.sourceforge.net>

	PR libfortran/27964
	* configure.ac: Check for setmode() function.
	* configure: Regenerate.
	* config.h.in: Regenerate.
	* io/unix.c (output_stream): Force stdout to binary mode. 
	(error_stream): Force stderr to binary mode.

2006-09-15  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/29099
	* intrinsics/date_and_time.c (secnds): Fix case of zero time.

2006-09-15  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/29053
	* io.h (gfc_unit): Add variable, strm_pos, to track
	STREAM I/O file position.
	* file_pos.c (st_rewind): Set strm_pos to beginning.
	* open.c (new_unit): Initialize strm_pos.
	* read.c (read_x): Bump strm_pos.
	* inquire.c (inquire_via_unit): Return strm_pos value.
	* transfer.c (read_block),(read_block_direct),(write_block)
	(write_buf): Seek to strm_pos - 1.  Update strm_pos when done.
	(pre_position): Initialize strm_pos.
	(data_transfer_init): Set strm_pos if DT_HAS_REC.
	(finalize_transfer): Flush file, no need to update strm_pos.

2006-09-10  Paul Thomas  <pault@gcc.gnu.org>

	PR libfortran/28947
	* m4/matmul.m4: For the case where the second input argument is
	transposed, ensure that the case with rank (a) == 1 is
	correctly calculated.
	* generated/matmul_r4.c: Regenerate.
	* generated/matmul_r8.c: Regenerate.
	* generated/matmul_r10.c: Regenerate.
	* generated/matmul_r16.c: Regenerate.
	* generated/matmul_c4.c: Regenerate.
	* generated/matmul_c8.c: Regenerate.
	* generated/matmul_c10.c: Regenerate.
	* generated/matmul_c16.c: Regenerate.
	* generated/matmul_i4.c: Regenerate.
	* generated/matmul_i8.c: Regenerate.
	* generated/matmul_i16.c: Regenerate.

2006-08-27  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/28354
	* io/write.c: Check for special case of zero precision in format
	and pre-round the real value.

2006-08-15  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/25828
	* libgfortran.h: Rename GFC_LARGE_IO_INT to GFC_IO_INT.
	* io/file_pos.c (st_backspace): Ignore if access=STREAM.
	(st_rewind): Handle case of access=STREAM.
	* io/open.c (access_opt): Add STREAM_ACCESS.
	(edit_modes): Set current_record to zero only if not STREAM.
	(new_unit): Initialize maxrec, recl, and last_record for STREAM.
	* io/read.c (read_x): Advance file position for STREAM.
	* io/io.h (enum unit_access): Align IOPARM flags with frontend.
	Add ACCESS_STREAM. Add prototype for is_stream_io () function.
	Use GFC_IO_INT.
	* io/inquire.c (inquire_via_unit): Add text for access = "STREAM".
	* io/unit.c (is_stream_io): New function to return true if access =
	STREAM.
	* io/transfer.c (file_mode): Add modes for unformatted stream and
	formatted stream. (current_mode): Return appropriate file mode based
	on access flags.
	(read_block): Handle formatted stream reads.
	(read_block_direct): Handle unformatted stream reads.
	(write_block): Handle formatted stream writes.
	(write_buf): Handle unformatted stream writes.
	(unformatted_read): Fix up, use temporary for size.
	(pre_position): Position file for STREAM access.
	(data_transfer_init): Initialize for stream access, skip irrelevent
	error checks.
	(next_record_r),(next_record_w), and (next_record): Do nothing for
	stream I/O.
	(finalize_transfer): Flush when all done if stream I/O.

2006-08-12  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	* intrinsics/bessel.c: Add prototypes for all functions.

2006-08-05  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	* intrinsics/access.c (access_func): Remove export directive.

2006-08-02  Thomas Koenig  <Thomas.Koenig@online.de>

	* Makefile.in:  Regenerate using automake 1.9.6.
	* aclocal.m4:  Revert to previous version.

2006-08-01  Thomas Koenig  <Thomas.Koenig@online.de>

	PR libfortran/28452
	* Makefile.am:  Remove normalize.c.
	* aclocal.m4:  Regenerate using aclocal 1.9.3.
	* Makefile.in:  Regenerate using automake 1.9.3.
	* libgfortran.h:  #include <float.h>.
	Define GFC_REAL_*_DIGITS and GFC_REAL_*_RADIX.
	Remove prototypes for normalize_r4_i4 and normalize_r8_i8.
	* intrinsics/random.c (top level): Add prototypes for
	random_r10, arandom_r10, random_r16 and arandom_r16.
	(rnumber_4):  New static function.
	(rnumber_8):  New static function.
	(rnumber_10): New static function.
	(rnumber_16): New static function.
	(top level):  Set to kiss_size to 12 if we have
	REAL(KIND=16), to 8 otherwise.
	Define KISS_DEFAULT_SEED_1, KISS_DEFAULT_SEED_2 and
	KISS_DEFAULT_SEED_3.
	(kiss_random_kernel):  Take argument to differentiate
	between different random number generators.
	(random_r4):  Add argument to call to kiss_random_kernel,
	use rnumber_*.
	(random_r8):  Likewise.
	(random_r10):  New function.
	(random_r16):  New function.
	(arandom_r4):  Add argument to call to kiss_random_kernel,
	use_rnumber_*.
	(arandom_r8):  Likewise.
	(arandom_r10):  New function.
	(arandom_r16):  New function.
	* intrinsics/rand.c (rand):  Use shift and mask.
	* runtime/normalize.c:  Remove.

2006-07-30  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/28335
	* file_position.c (st_flush): Add clearer error when UNIT does not
	exist. Add reference to standard in comment.

2006-07-30  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/28335
	* close.c (st_close): Revert previous patch and add comment.
	* file_position.c (st_flush): Revert previous patch and add comment.

2006-07-30  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	* intrinsics/date_and_time.c: Add functions for GMTIME and LTIME.
	* intrinsics/access.c: New file.
	* intrinsics/chmod.c: New file.
	* configure.ac: Add checks for <sys/wait.h>, access, fork,execl
	and wait.
	* Makefile.am: Add new files intrinsics/access.c and
	intrinsics/chmod.c.
	* configure: Regenerate.
	* config.h.in: Regenerate.
	* Makefile.in: Regenerate.

2006-07-30  Janne Blomqvist  <jb@gcc.gnu.org>

	* io/transfer.c (transfer_array): Remove stride0 fix.
	
2006-07-26  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	* configure.ac: Check for function clock.
	* Makefile.am: Compile new file intrinsics/clock.c.
	* intrinsics/clock.c: New file.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* config.h.in: Regenerate.
	* intrinsics/stat.c: Rename the old stat_i?_sub functions to
	helper functions stat_i?_sub_0, and use them for both STAT and
	LSTAT.

2006-07-25  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/28335
	* close.c (st_close): Add error when UNIT does not exist.
	* file_position.c (st_flush): Add error when UNIT does not exist.

2006-07-25  Paolo Bonzini  <bonzini@gnu.org>

	PR build/26188
	* configure: Regenerate.

2006-07-23  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/25289
	* libgfortran.h: Add conditional definition of GFC_LARGE_IO_INT type.
	* io/io.h (st_parameter_dt): Define rec as type GFC_LARGE_IO_INT.

2006-07-21  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/28339
	* io/transfer.c (next_record_w): Use next_array_record result to set
	END_FILE. (write_block): Test for END_FILE before the next write occurs.
	* io/unit.c (get_internal_unit): Initialize iunit->endfile for internal
	unit.

2006-07-19  Janne Blomqvist  <jb@gcc.gnu.org>

	PR fortran/27919
	* m4/dotprodc.m4: Remove.
	* m4/dotprodl.m4: Remove.
	* m4/dotprod.m4: Remove.
	* generated/dotprod_*.c: Remove.
	* Makefile.am: Remove any references to dot_product
	implementation.
	* Makefile.in: Regenerated.
	
2006-07-18  Paolo Bonzini  <bonzini@gnu.org>

	* configure: Regenerate.

2006-07-15  Steven G. Kargl  <kargls@comcast.net>

	* intrinsics/etime.c: Remove etime_
	* libtool-version: Bump from libgfortran.so.1 to libgfortran.so.2

2006-07-12  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	PR fortran/28163
	* intrinsics/string_intrinsics.c (copy_string): Remove function.

2006-07-04  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	* intrinsics/date_and_time.c (itime0,idate0,itime_i4,itime_i8,
	idate_i4,idate_i8): New functions.

2006-07-03  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/27704
	* runtime/error.c (notify_std): Pass common flags into function. Use
	flags to show locus of error or warning.
	* libgfortran.h: Add enum try.  Add prototype for notify_std.
	* io/open.c (edit_modes): Allow status="old" and add extension to
	allow status="scratch"
	*io/list_read.c (nml_read_obj): Update call to notify_std.
	*io/io.h: Remove enum try and prototype for notify_std.
	*io/transfer.c (read_sf): Update call to notify_std.
	*io/format.c (parse_format_list): Update call to notify_std.

2006-06-25  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	* io/io.h: Move proto for unit_to_fd...
	* libgfortran.h: ...here.

2006-06-24  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	* intrinsics/ierrno.c: Don't include "io/io.h".
	* intrinsics/sleep.c: Likewise.
	* intrinsics/perror.c: Likewise.
	* intrinsics/stat.c: Likewise.
	* intrinsics/kill.c: Likewise.
	* intrinsics/time.c: Likewise.
	* intrinsics/fnum.c: Likewise.
	* intrinsics/rename.c: Likewise.
	* intrinsics/symlnk.c: Likewise.
	* intrinsics/chdir.c: Likewise.
	* intrinsics/link.c: Likewise.
	* intrinsics/random.c: Don't include "io/io.h". Include	<gthr.h>.
	* intrinsics/rand.c: Likewise.

2006-06-24  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	PR fortran/28094
	* Makefile.am: Add _mod_r10.F90 and _mod_r16.F90.
	* Makefile.in: Regenerate.
	* generated/_mod_r10.F90: New file.
	* generated/_mod_r16.F90: New file.

2006-06-22  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	PR libfortran/26769
	* Makefile.am: Add r4 and r8 versions of reshape and transpose.
	* Makefile.in: Regenerate.
	* generated/reshape_r4.c: New file.
	* generated/reshape_r8.c: New file.
	* generated/transpose_r4.c: New file.
	* generated/transpose_r8.c: New file.

2006-06-20  Paul Thomas  <pault@gcc.gnu.org>

	PR libfortran/28005
	* m4/matmul.m4: aystride = 1 does not uniquely detect the
	presence of a temporary transpose; an array element in the
	first dimension produces the same signature.  Detect this
	using the rank of a and add specific code.
	* generated/matmul_r4.c: Regenerate.
	* generated/matmul_r8.c: Regenerate.
	* generated/matmul_r10.c: Regenerate.
	* generated/matmul_r16.c: Regenerate.
	* generated/matmul_c4.c: Regenerate.
	* generated/matmul_c8.c: Regenerate.
	* generated/matmul_c10.c: Regenerate.
	* generated/matmul_c16.c: Regenerate.
	* generated/matmul_i4.c: Regenerate.
	* generated/matmul_i8.c: Regenerate.
	* generated/matmul_i16.c: Regenerate.

2006-06-18  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	PR libgomp/27254
	* io/unit.c (get_internal_unit): Initialize and lock thread mutex
	for internal units.

2006-06-06  Janne Blomqvist  <jb@gcc.gnu.org>

	* m4/in_pack.m4: Add TODO comment about detecting temporaries,
	remove test for stride 0, update copyright year.
	* m4/transpose.m4: Remove test for stride 0, update copyright
	year.
	* m4/iforeach.m4: Likewise.
	* m4/shape.m4: Likewise.
	* m4/in_unpack.m4: Likewise.
	* m4/reshape.m4: Likewise.
	* m4/ifunction.m4: Likewise.
	* m4/matmul.m4: Likewise.
	* m4/matmull.m4: Likewise.
	* intrinsics/etime.c: Likewise.
	* intrinsics/transpose_generic.c: Likewise.
	* intrinsics/spread_generic.c: Likewise.
	* intrinsics/stat.c: Likewise.
	* intrinsics/reshape_generic.c: Likewise.
	* intrinsics/random.c: Likewise.
	* generated/*: Regenerated from above changed m4 files.
	
2006-05-29  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/27757
	* io/unix.c (fd_seek): Set active to zero.

2006-05-29  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/27634
	* io/format.c (parse_format_list): Allow missing period in format only
	if -std=legacy.

2006-05-28  Thomas Koenig  <Thomas.Koenig@online.de>

	* intrinsics/string_intrinsics.c (compare_string):
	Use memcmp instead of strncmp to avoid tripping over
	CHAR(0) in a string.

2006-05-27  Janne Blomqvist  <jb@gcc.gnu.org>

	* io/io.h (find_or_create_unit): Correct export declaration.
	
2006-05-27  Janne Blomqvist  <jb@gcc.gnu.org>

	* intrinsics/abort.c (abort_): Remove.

2006-05-26  Janne Blomqvist  <jb@gcc.gnu.org>

	* configure.ac: Remove AC_FUNC_MMAP.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
	* config.h.in: Regenerated.
	* aclocal.m4: Regenerated.

2006-05-25  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	* intrinsics/associated.c (associated): Zero-sized arrays should
	not be reported as ASSOCIATED.

2006-05-24  Carlos O'Donell  <carlos@codesourcery.com>

	* Makefile.am: Add install-html target. Add install-html to .PHONY
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	
2006-05-20  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/24459
	* io/list_read.c (nml_parse_qualifier): Leave loop spec end value
	at default value unless -std=f95 or if an array section
	is specified in namelist input.  Warn if -pedantic.
	* io/io.h (st_parameter_dt): Add expanded_read flag.

2006-05-19  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/22423
	* io/transfer.c (read_block): Return NULL instead of nothing.
	
2006-05-16  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/27575
	* io/transfer.c (read_block):  Add check for end file condition.
	(read_block_direct): Add check for end file condition.

2006-05-05  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	PR libfortran/26985
	* m4/matmul.m4: Correct the condition for the memset call,
	and remove the unneeded call to size0.
	* generated/matmul_r4.c: Regenerate.
	* generated/matmul_r8.c: Regenerate.
	* generated/matmul_r10.c: Regenerate.
	* generated/matmul_r16.c: Regenerate.
	* generated/matmul_c4.c: Regenerate.
	* generated/matmul_c8.c: Regenerate.
	* generated/matmul_c10.c: Regenerate.
	* generated/matmul_c16.c: Regenerate.
	* generated/matmul_i4.c: Regenerate.
	* generated/matmul_i8.c: Regenerate.
	* generated/matmul_i16.c: Regenerate.

2006-04-29  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/27360
	* io/list_read.c (read_logical):  Free line_buffer and free saved.

2006-04-28  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/27304
	* io/transfer.c (formatted_transfer_scalar):  Generate error if data
	descriptors are exhausted.
	* io/format.c (next_format0): Fix comment.

2006-04-22  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/20257
	* io/io.h: Add prototypes for get_internal_unit and free_internal_unit.
	* io/unit.c (get_internal_unit): Initialize unit number, not zero.
	(free_internal_unit): New function to consolidate freeing memory.
	(get_unit): Initialize internal_unit_desc to NULL when unit is
	external.
	* io/unix.c (mem_close): Check for not NULL before freeing memory.
	* io/transfer.c (read_block): Reset bytes_left and skip error if unit
	is preconnected and default record length is reached.
	(read_block_direct): Ditto.
	(write_block): Ditto.
	(write_buf): Ditto.
	(data_transfer_init): Only flush if not internal unit.
	(finalize_transfer): Ditto and delete code to free memory used by
	internal units.
	(st_read_done): Use new function - free_internal_unit.
	(st_write_done): Use new function - free_internal unit.

2006-04-22  Jakub Jelinek  <jakub@redhat.com>

	PR fortran/26769
	* Makefile.am (i_transpose_c): Add generated/transpose_r16.c.
	(i_reshape_c): Add generated/reshape_r16.c.
	* Makefile.in: Regenerated.
	* generated/transpose_r16.c: Generated new file.
	* generated/redhape_r16.c: Generated new file.

2006-04-14  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/27138
	* io/list_read.c (eat_line): New function.
	(parse_repeat): Use new function and free_saved.
	(read_logical): Same.
	(read_integer): Use new function.
	(parse_real): Use nml_bad_return and new function.
	(read_complex): Use new function and free_saved.
	(read_real): Same.

2006-04-12  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/26766
	* io/io.h: Add bit to identify associated unit as internal.
	* io/unit.c (get_external_unit): Renamed the find_unit_1 function to
	reflect the external unit functionality vs internal unit.
	(get_internal_unit): New function to allocate and initialize an internal
	unit structure.
	(get_unit): Use get_internal_unit and get_external_unit.
	(is_internal_unit): Revised to use new bit added in io.h.
	* io/transfer.c (data_transfer_init): Fix line width.
	(st_read_done): Free memory allocated for internal unit.
	(st_write_done): Add test to only flush and truncate when not an
	internal unit.  Free memory allocated for internal unit.

2006-04-11  Jakub Jelinek  <jakub@redhat.com>

	* io/io.h (st_parameter_dt): Revert 2005-12-10 change to
	u.pad, fix comment.
	(check_st_parameter_dt): New compile time assert.

2006-04-10  Jakub Jelinek  <jakub@redhat.com>

	PR libgfortran/24685
	* io/write.c (MIN_FIELD_WIDTH, STR, STR1): Define.
	(output_float): Increase buffer sizes for IEEE quad and IBM extended
	long double.
	(write_real): Output REAL(16) as 1PG43.34E4 rather than 1PG40.31E4.

2006-04-07  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/26890
	* io/io.h: Revert change to pad size made on 2006-03-30.
	Add comment explaining dependency with fortran/trans-io.c.
	
2006-04-03  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	* io/write.c (output_float): Update condition to not error when
	decimal precision in format specifier is zero.

2006-04-01  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	* config/fpu-387.h: Use previously added SSE code in all
	cases, as it really is the right thing to do.

2006-03-30  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/26890
	* io/io.h: Add size_used to st_parameter_dt, adjust pad size.
	*io/transfer.c (data_transfer_init): Initialize size_used to zero.
	(read_sf): Use size_used.
	(read_block): Likewise.
	(read_block_direct): Likewise.
	(write_block): Likewise.
	(write_buf): Likewise and eliminate erroneous FAILURE return.
	(finalize_transfer): Assign value of size_used to *dtp->size.

2006-03-30  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	PR libfortran/26712
	* config/fpu-387.h: Add special case for handling of SSE
	control bit on i386-darwin.

2006-03-30  Thomas Koenig  <Thomas.Koenig@online.de>

	PR fortran/25031
	* runtime/memory.c (allocate_array):  If stat is present and
	the variable is already allocated, free the variable, do
	the allocation and set stat.
	(allocate_array_64):  Likewise.  Whitespace fix.

2006-03-26  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/26880
	* io/file_pos.c (st_rewind): Clear read_bad flag.

2006-03-25  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/26661
	* io/io.h: Add read_sf so it can be used by read_x.
	* io/transfer.c (read_sf): Pass no_error flag to read_sf.  Use it to
	break out rather than error on EOF or EOR conditions.
	(read_block): Update call to read_sf.
	(read_block_direct): Ditto.
	* io/read.c (read_x): Use the modified read_sf instead of read_block.

2006-03-25  Thomas Koenig  <Thomas.Koenig@online.de>

	PR libfortran/26735
	* io/transfer.c (data_transfer_init):  Set u_flags.convert
	on an unopened unit if specified by environment variable
	(via get_unformatted_convert) or by compile-time option.

2006-03-25  Thomas Koenig  <Thomas.Koenig@online.de>

	PR fortran/26769
	* Makefile.am:  Add transpose_r10.c and reshape_r10.c.
	* aclocal.m4:  Regenerate using aclocal 1.9.3.
	* Makefile.in:  Regenerate using automake 1.9.3.
	* m4/iparm.m4 (rtype_ccode):  If rtype_letter is `i',
	evaluate to rtype_kind, otherwise to rtype_code.
	* generated/transpose_r10.c:  Add.
	* generated/reshape_r10.c:  Add.

2006-03-22  Thomas Koenig  <Thomas.Koenig@online.de>

	PR fortran/19303
	* libgfortran.h (compile_options_t):  Add record_marker.
	* runtime/compile_options.c (set_record_marker):
	New function.
	* io/open.c:  If we have four-byte record markers, use
	GFC_INTEGER_4_HUGE as default record length.
	* io/file_pos.c (unformatted_backspace):  Handle
	different size record markers.
	* io/transfer.c (us_read):  Likewise.
	(us_write):  Likewise.
	(next_record_r):  Likewise.
	(write_us_marker):  Likewise.
	(next_record_w):  Likewise.

2006-03-20  Thomas Koenig  <Thomas.Koenig@online.de>

	PR fortran/20935
	* m4/iforeach.m4:  Add SCALAR_FOREACH_FUNCTION macro.
	* m4/ifunction.m4:  Add SCALAR_ARRAY_FUNCTION macro.
	* m4/minloc0.m4:  Use SCALAR_FOREACH_FUNCTION.
	* m4/minloc1.m4:  Use SCALAR_ARRAY_FUNCTION.
	* m4/maxloc0.m4:  Use SCALAR_FOREACH_FUNCTION.
	* m4/maxloc1.m4:  Use SCALAR_ARRAY_FUNCTION.
	* m4/minval.m4:  Likewise.
	* m4/maxval.m4:  Likewise.
	* m4/product.m4:  Likewise.
	* m4/sum.m4:  Likewise.
	* minloc0_16_i16.c : Regenerated.
	* minloc0_16_i4.c : Regenerated.
	* minloc0_16_i8.c : Regenerated.
	* minloc0_16_r10.c : Regenerated.
	* minloc0_16_r16.c : Regenerated.
	* minloc0_16_r4.c : Regenerated.
	* minloc0_16_r8.c : Regenerated.
	* minloc0_4_i16.c : Regenerated.
	* minloc0_4_i4.c : Regenerated.
	* minloc0_4_i8.c : Regenerated.
	* minloc0_4_r10.c : Regenerated.
	* minloc0_4_r16.c : Regenerated.
	* minloc0_4_r4.c : Regenerated.
	* minloc0_4_r8.c : Regenerated.
	* minloc0_8_i16.c : Regenerated.
	* minloc0_8_i4.c : Regenerated.
	* minloc0_8_i8.c : Regenerated.
	* minloc0_8_r10.c : Regenerated.
	* minloc0_8_r16.c : Regenerated.
	* minloc0_8_r4.c : Regenerated.
	* minloc0_8_r8.c : Regenerated.
	* minloc1_16_i16.c : Regenerated.
	* minloc1_16_i4.c : Regenerated.
	* minloc1_16_i8.c : Regenerated.
	* minloc1_16_r10.c : Regenerated.
	* minloc1_16_r16.c : Regenerated.
	* minloc1_16_r4.c : Regenerated.
	* minloc1_16_r8.c : Regenerated.
	* minloc1_4_i16.c : Regenerated.
	* minloc1_4_i4.c : Regenerated.
	* minloc1_4_i8.c : Regenerated.
	* minloc1_4_r10.c : Regenerated.
	* minloc1_4_r16.c : Regenerated.
	* minloc1_4_r4.c : Regenerated.
	* minloc1_4_r8.c : Regenerated.
	* minloc1_8_i16.c : Regenerated.
	* minloc1_8_i4.c : Regenerated.
	* minloc1_8_i8.c : Regenerated.
	* minloc1_8_r10.c : Regenerated.
	* minloc1_8_r16.c : Regenerated.
	* minloc1_8_r4.c : Regenerated.
	* minloc1_8_r8.c : Regenerated.
	* maxloc0_16_i16.c : Regenerated.
	* maxloc0_16_i4.c : Regenerated.
	* maxloc0_16_i8.c : Regenerated.
	* maxloc0_16_r10.c : Regenerated.
	* maxloc0_16_r16.c : Regenerated.
	* maxloc0_16_r4.c : Regenerated.
	* maxloc0_16_r8.c : Regenerated.
	* maxloc0_4_i16.c : Regenerated.
	* maxloc0_4_i4.c : Regenerated.
	* maxloc0_4_i8.c : Regenerated.
	* maxloc0_4_r10.c : Regenerated.
	* maxloc0_4_r16.c : Regenerated.
	* maxloc0_4_r4.c : Regenerated.
	* maxloc0_4_r8.c : Regenerated.
	* maxloc0_8_i16.c : Regenerated.
	* maxloc0_8_i4.c : Regenerated.
	* maxloc0_8_i8.c : Regenerated.
	* maxloc0_8_r10.c : Regenerated.
	* maxloc0_8_r16.c : Regenerated.
	* maxloc0_8_r4.c : Regenerated.
	* maxloc0_8_r8.c : Regenerated.
	* maxloc1_16_i16.c : Regenerated.
	* maxloc1_16_i4.c : Regenerated.
	* maxloc1_16_i8.c : Regenerated.
	* maxloc1_16_r10.c : Regenerated.
	* maxloc1_16_r16.c : Regenerated.
	* maxloc1_16_r4.c : Regenerated.
	* maxloc1_16_r8.c : Regenerated.
	* maxloc1_4_i16.c : Regenerated.
	* maxloc1_4_i4.c : Regenerated.
	* maxloc1_4_i8.c : Regenerated.
	* maxloc1_4_r10.c : Regenerated.
	* maxloc1_4_r16.c : Regenerated.
	* maxloc1_4_r4.c : Regenerated.
	* maxloc1_4_r8.c : Regenerated.
	* maxloc1_8_i16.c : Regenerated.
	* maxloc1_8_i4.c : Regenerated.
	* maxloc1_8_i8.c : Regenerated.
	* maxloc1_8_r10.c : Regenerated.
	* maxloc1_8_r16.c : Regenerated.
	* maxloc1_8_r4.c : Regenerated.
	* maxloc1_8_r8.c : Regenerated.
	* maxval_i16.c : Regenerated.
	* maxval_i4.c : Regenerated.
	* maxval_i8.c : Regenerated.
	* maxval_r10.c : Regenerated.
	* maxval_r16.c : Regenerated.
	* maxval_r4.c : Regenerated.
	* maxval_r8.c : Regenerated.
	* minval_i16.c : Regenerated.
	* minval_i4.c : Regenerated.
	* minval_i8.c : Regenerated.
	* minval_r10.c : Regenerated.
	* minval_r16.c : Regenerated.
	* minval_r4.c : Regenerated.
	* minval_r8.c : Regenerated.
	* sum_c10.c : Regenerated.
	* sum_c16.c : Regenerated.
	* sum_c4.c : Regenerated.
	* sum_c8.c : Regenerated.
	* sum_i16.c : Regenerated.
	* sum_i4.c : Regenerated.
	* sum_i8.c : Regenerated.
	* sum_r10.c : Regenerated.
	* sum_r16.c : Regenerated.
	* sum_r4.c : Regenerated.
	* sum_r8.c : Regenerated.
	* product_c10.c : Regenerated.
	* product_c16.c : Regenerated.
	* product_c4.c : Regenerated.
	* product_c8.c : Regenerated.
	* product_i16.c : Regenerated.
	* product_i4.c : Regenerated.
	* product_i8.c : Regenerated.
	* product_r10.c : Regenerated.
	* product_r16.c : Regenerated.
	* product_r4.c : Regenerated.
	* product_r8.c : Regenerated.

2006-03-17  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/26509
	* libgfortran.h: Add ERROR_DIRECT_EOR.
	* runtime/error.c (translate_error): Add translation for new error.
	* io/transfer.c (write_buf): Add check for EOR when mode is 
	direct access.

2006-03-13  Paul Thomas  <pault@gcc.gnu.org>

	PR fortran/25378
	* libgfortran/m4/minloc1.m4: Set the initial position to zero and
	modify the condition for updating it, to implement the F2003
	requirement for all(mask).eq.false.
	* libgfortran/m4/maxloc1.m4: The same.
	* libgfortran/m4/iforeach.m4: The same.
	* libgfortran/m4/minloc0.m4: The same.
	* libgfortran/m4/maxloc0.m4: The same.
	* libgfortran/generated/maxloc0_16_i16.c: Regenerated, together
	with 41 others.
	* libgfortran/generated/minloc0_16_i16.c: Regenerated, together
	with 41 others.

2006-03-09  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/26499
	* io/file_pos (st_rewind): Flush always.
	* io/unix.c (fd_truncate): Return SUCCESS rather than FAILURE for
	special files like /dev/null.
	* io/transfer.c (st_write_done): Remove broken logic that
	prevented calling fd_truncate.

2006-03-05  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/26554
	* io/list_read.c (read_logical): Return the value if not in namelist
	mode.

2006-03-03  Thomas Koenig  <Thomas.Koenig@online.de>

	PR fortran/25031
	* runtime/memory.c:  Adjust copyright years.
	(allocate_array):  New function.
	(allocate64_array):  New function.
	* libgfortran.h (error_codes):  Add ERROR_ALLOCATION.

2006-02-28  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/26136
	* io/io.h: Add flag for reading from line_buffer.
	* io/list_read.c (l_push_char): New function to save namelist
	input when reading logicals.
	(free_line): New function to free line_buffer memory.
	(next_char): Added feature to read from line_buffer.
	(read_logical): Use new functions to test for '=' after reading a
	logical value, checking for possible variable name.
	(namelist_read): Use free_line when all done.

2006-02-27  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/26464
	* io/file_pos.c (st_backspace): Flush and truncate file
	when in AFTER_ENDFILE condition.
	* io/transfer.c (st_read_done): Remove flush, no longer needed.

2006-02-24  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/26423
	* io/unix.c (fd_seek): Revert change from 25949.
	(fd_read): Same.
	(fd_write): Same.

2006-02-19  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	* io/open.c (edit_modes): Correct abusive copy-pasting.

2006-02-16  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	PR libfortran/24903
	* m4/dotprodc.m4: Use __builtin_conj instead of assigning real
	and imaginary parts separately.
	* generated/dotprod_c4.c: Regenerated.
	* generated/dotprod_c8.c: Regenerated.
	* generated/dotprod_c10.c: Regenerated.
	* generated/dotprod_c16.c: Regenerated.

2006-02-12  Janne Blomqvist  <jb@gcc.gnu.org>

	PR libgfortran/25949
	* io/io.h: Add set function pointer to struct stream.  
	* io/unix.c (fd_seek): Only update offset, don't seek.
	(fd_sset): New function.
	(fd_read): Call lseek directly if necessary.
	(fd_write): Likewise.
	(fd_open): Set pointer to fd_sset.
	(mem_set): New function.
	(open_internal): Set pointer to mem_set.
	* io/transfer.c (write_block_direct): Rename to write_buf, add
	error return, non-pointer length argument.
	(unformatted_write): Update to use write_buf.
	(us_write): Simplify by using swrite instead of salloc_w.
	(write_us_marker): New function.
	(new_record_w): Use sset instead of memset, use write_us_marker,
	simplify by using swrite instead of salloc_w.

2006-02-08  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	PR libfortran/25425
	* libgfortran.h: Add pedantic field to compile_options struct.
	* io/write.c (calculate_G_format): Depending on the standard,
	choose E or F format for list-directed output of 0.0.
	* runtime/error.c (notify_std): Make warning and error dependent
	on pedanticity.
	* runtime/compile_options.c (set_std): Use new pedantic argument.

2006-02-07  Dale Ranta  <dir@lanl.gov>

	PR fortran/25577
	* intrinsics/mvbits.c: Shift '(TYPE)1' type when building 'lenmask'.

2006-02-07  Rainer Emrich <r.emrich@de.tecosim.com>

	* intrinsics/c99_functions.c: Work around incompatible
	declarations of cabs{,f,l} on pre-C99 IRIX systems.

2005-02-06  Thomas Koenig  <Thomas.Koenig@online.de>

	PR libfortran/23815
	* runtime/environ.c (init_unformatted):  Add GFORTRAN_CONVERT_UNIT
	environment variable.
	(top level):  Add defines, type and static variables for
	GFORTRAN_CONVERT_UNIT handling.
	(search_unit):  New function.
	(match_word): New function.
	(match_integer): New function.
	(next_token): New function.
	(push_token): New function.
	(mark_single): New function.
	(mark_range): New funciton.
	(do_parse): New function.
	(init_unformatted): New function.
	(get_unformatted_convert): New function.
	* runtime/compile_options.c:  Add set_convert().
	* libgfortran.h:  Add convert to compile_options_t.
	* io/open.c (st_open): Call get_unformatted_convert to get
	unit default; if CONVERT_NONE is returned, check for
	the presence of a CONVERT specifier and use it.
	As default, use compile_options.convert.
	* io/io.h (top level): Add CONVERT_NONE to unit_convert, to signal
	"nothing has been set".
	(top level): Add prototype for get_unformatted_convert.

2006-02-06  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

	PR libfortran/24685
	* io/write.c (write_real): Widen the default format for real(10)
	variables output.

2006-01-24  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/25835
	* io/transfer.c (st_read_done): Flush buffers when read is done.

2006-01-17  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/25697
	* io/transfer.c (us_read): Detect end of file condition from previous
	operations and bail out (no need to pre-position).

2006-01-17  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/25631
	* io/transfer.c (formatted_transfer_scalar): Adjust pending_spaces and
	skips so that TL works correctly when no bytes_used yet.  

2006-01-16  Roger Sayle  <roger@eyesopen.com>

	* configure.ac (CFLAGS): Update to include -std=gnu99 so that
	the configure tests will be run with the same environment as
	used to compile the libgfortran source code.
	* configure: Regenerate.

2006-01-12  Roger Sayle  <roger@eyesopen.com>

	* intrinsics/c99_functions.c: Add function prototypes to avoid
	warnings from -Wstrict-prototypes -Wmissing-prototypes.  On Tru64
	work around a brain-dead libm by redirecting calls to cabs{,f,l}
	to a local __gfc_cabs{,f,l}.

2006-01-07  Janne Blomqvist  <jb@gcc.gnu.org>

	* configure.ac: Remove check for sys/mman.h.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
	* config.h.in: Regenerated.
	* aclocal.m4: Regenerated.
	
2006-01-05  Jerry DeLisle  <jvdelisle@gcc.gnu.org>

	PR libgfortran/25598
	* io/file_pos.c (unformatted_backspace): Assure the new file position
	to seek is not less than zero.
	(st_backspace): Set unit bytes_left to zero.
	* io/transfer.c (next_record_r): Fix line lengths, no functional change.

2006-01-02  Paolo Bonzini  <bonzini@gnu.org>

	PR target/25259
	* configure.ac: Use GCC_HEADER_STDINT.
	* libgfortran.h: Include gstdint.h.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

2006-01-01  Steven G. Kargl  <kargls@comcast.net>

	* ChangeLog: Split into years ...
	* ChangeLog-2002: here.
	* ChangeLog-2003: here.
	* ChangeLog-2004: here.
	* ChangeLog-2005: here.