-- C760009.A
--
--                             Grant of Unlimited Rights
--
--     Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687,
--     F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained 
--     unlimited rights in the software and documentation contained herein.
--     Unlimited rights are defined in DFAR 252.227-7013(a)(19).  By making 
--     this public release, the Government intends to confer upon all 
--     recipients unlimited rights  equal to those held by the Government.  
--     These rights include rights to use, duplicate, release or disclose the 
--     released technical data and computer software in whole or in part, in 
--     any manner and for any purpose whatsoever, and to have or permit others 
--     to do so.
--
--                                    DISCLAIMER
--
--     ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR
--     DISCLOSED ARE AS IS.  THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED 
--     WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE
--     SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE 
--     OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A
--     PARTICULAR PURPOSE OF SAID MATERIAL.
--*
--
-- OBJECTIVE:
--      Check that for an extension_aggregate whose ancestor_part is a
--      subtype_mark (i.e. Typemark'( Subtype with Field => x, etc.) )
--      Initialize is called on all controlled subcomponents of the
--      ancestor part; if the type of the ancestor part is itself controlled,
--      the Initialize procedure of the ancestor type is called, unless that
--      Initialize procedure is abstract.
--
--      Check that the utilization of a controlled type for a generic actual
--      parameter supports the correct behavior in the instantiated package.
--
-- TEST DESCRIPTION:
--      Declares a generic package instantiated to check that controlled
--      types are not impacted by the "generic boundary."
--      This instance is then used to perform the tests of various
--      aggregate formations of the controlled type.  After each operation
--      in the main program that should cause implicit calls, the "state" of
--      the software is checked.  The "state" of the software is maintained in
--      several variables which count the calls to the Initialize, Adjust and
--      Finalize procedures in each context.  Given the nature of the
--      language rules, the test specifies a minimum number of times that
--      these subprograms should have been called.  The test also checks cases
--      where the subprograms should not have been called.
--     
--      As per the example in AARM 7.6(11a..d);6.0, the distinctions between
--      the presence/absence of default values is tested.
--
-- DATA STRUCTURES
--
--      C760009_3.Master_Control is derived from
--        C760009_2.Control is derived from
--          Ada.Finalization.Controlled
--
--      C760009_1.Simple_Control is derived from
--        Ada.Finalization.Controlled
--
--      C760009_3.Master_Control contains
--        Standard.Integer
--
--      C760009_2.Control contains
--        C760009_1.Simple_Control (default value)
--        C760009_1.Simple_Control (default initialized)
--
--
-- CHANGE HISTORY:
--      01 MAY 95   SAIC    Initial version
--      19 FEB 96   SAIC    Fixed elaboration Initialize count
--      14 NOV 96   SAIC    Allowed for 7.6(21) optimizations
--      13 FEB 97   PWB.CTA Initialized counters at lines 127-129
--      26 JUN 98   EDS     Added pragma Elaborate_Body to C760009_0
--                          to avoid possible instantiation error
--!

---------------------------------------------------------------- C760009_0

with Ada.Finalization;
generic

  type Private_Formal is private;

  with procedure TC_Validate( APF: in out Private_Formal );

package C760009_0 is -- Check_1

  pragma Elaborate_Body;
  procedure TC_Check_1( APF: in     Private_Formal );
  procedure TC_Check_2( APF:    out Private_Formal );
  procedure TC_Check_3( APF: in out Private_Formal );

end C760009_0;
 
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

with Report;
package body C760009_0 is -- Check_1

    procedure TC_Check_1( APF: in     Private_Formal ) is
      Local : Private_Formal;
    begin
      Local := APF;
      TC_Validate( Local );
    end TC_Check_1;

    procedure TC_Check_2( APF:    out Private_Formal ) is
      Local : Private_Formal;  -- initialized by virtue of actual being
                               -- Controlled
    begin
      APF := Local;
      TC_Validate( APF );
    end TC_Check_2;

    procedure TC_Check_3( APF: in out Private_Formal ) is
      Local : Private_Formal;
    begin
      Local := APF;
      TC_Validate( Local );
    end TC_Check_3;

end C760009_0;
 
---------------------------------------------------------------- C760009_1

with Ada.Finalization;
package C760009_1 is

  Initialize_Called : Natural := 0;
  Adjust_Called     : Natural := 0;
  Finalize_Called   : Natural := 0;

  procedure Reset_Counters;

  type Simple_Control is new Ada.Finalization.Controlled with private;

  procedure Initialize( AV: in out Simple_Control );
  procedure Adjust    ( AV: in out Simple_Control );
  procedure Finalize  ( AV: in out Simple_Control );
  procedure Validate  ( AV: in out Simple_Control );

  function Item( AV: Simple_Control'Class ) return String;

  Empty : constant Simple_Control;

  procedure TC_Trace( Message: String );

private
  type Simple_Control is new Ada.Finalization.Controlled with record
    Item: Natural;
  end record;

  Empty : constant Simple_Control := ( Ada.Finalization.Controlled with 0 );

end C760009_1;
 
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

with Report;
package body C760009_1 is

  -- Maintenance_Mode and TC_Trace are for the test writers and compiler
  -- developers to get more information from this test as it executes.
  -- Maintenance_Mode is always False for validation purposes.

  Maintenance_Mode : constant Boolean := False;

  procedure TC_Trace( Message: String ) is
  begin
    if Maintenance_Mode then
      Report.Comment( Message );
    end if;
  end TC_Trace;

  procedure Reset_Counters is
  begin
    Initialize_Called := 0;
    Adjust_Called     := 0;
    Finalize_Called   := 0;
  end Reset_Counters;

  Master_Count : Natural := 100;  -- Help distinguish values

  procedure Initialize( AV: in out Simple_Control ) is
  begin
    Initialize_Called := Initialize_Called +1;
    AV.Item := Master_Count;
    Master_Count := Master_Count +100;
    TC_Trace( "Initialize _1.Simple_Control" );
  end Initialize;

  procedure Adjust    ( AV: in out Simple_Control ) is
  begin
    Adjust_Called := Adjust_Called +1;
    AV.Item := AV.Item +1;
    TC_Trace( "Adjust _1.Simple_Control" );
  end Adjust;

  procedure Finalize  ( AV: in out Simple_Control ) is
  begin
    Finalize_Called := Finalize_Called +1;
    AV.Item := AV.Item +1;
    TC_Trace( "Finalize _1.Simple_Control" );
  end Finalize;

  procedure Validate  ( AV: in out Simple_Control ) is
  begin
    Report.Failed("Attempt to Validate at Simple_Control level");
  end Validate;

  function Item( AV: Simple_Control'Class ) return String is
  begin
    return Natural'Image(AV.Item);
  end Item;

end C760009_1;
 
---------------------------------------------------------------- C760009_2

with C760009_1;
with Ada.Finalization;
package C760009_2 is

  type Control is new Ada.Finalization.Controlled with record
    Element_1 : C760009_1.Simple_Control;
    Element_2 : C760009_1.Simple_Control := C760009_1.Empty;
  end record;

  procedure Initialize( AV: in out Control );
  procedure Finalize  ( AV: in out Control );

  Initialized : Natural := 0;
  Finalized   : Natural := 0;

end C760009_2;
 
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

package body C760009_2 is

  procedure Initialize( AV: in out Control ) is
  begin
    Initialized := Initialized +1;
    C760009_1.TC_Trace( "Initialize _2.Control" );
  end Initialize;

  procedure Finalize  ( AV: in out Control ) is
  begin
    Finalized := Finalized +1;
    C760009_1.TC_Trace( "Finalize _2.Control" );
  end Finalize;

end C760009_2;
 
---------------------------------------------------------------- C760009_3

with C760009_0;
with C760009_2;
package C760009_3 is

  type Master_Control is new C760009_2.Control with record
    Data: Integer;
  end record;

  procedure Initialize( AC: in out Master_Control );
  -- calls C760009_2.Initialize
  -- embedded data causes 1 call to C760009_1.Initialize

  -- Adjusting operation will
  -- make 1 call to C760009_2.Adjust 
  -- make 2 call to C760009_1.Adjust 

  -- Finalize operation will
  -- make 1 call to C760009_2.Finalize 
  -- make 2 call to C760009_1.Finalize 

  procedure Validate( AC: in out Master_Control );

  package Check_1 is
    new C760009_0(Master_Control, Validate);

end C760009_3;
 
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

with Report;
with C760009_1;
package body C760009_3 is

  procedure Initialize( AC: in out Master_Control ) is
  begin
    AC.Data := 42;
    C760009_2.Initialize(C760009_2.Control(AC));
    C760009_1.TC_Trace( "Initialize Master_Control" );
  end Initialize;

  procedure Validate( AC: in out Master_Control ) is
  begin
    if AC.Data not in 0..1000 then
      Report.Failed("C760009_3.Control did not Initialize" );
    end if;
  end Validate;

end C760009_3;
 
--------------------------------------------------------------------- C760009

with Report;
with C760009_1;
with C760009_2;
with C760009_3;
procedure C760009 is

  -- Comment following declaration indicates expected calls in the order:
  -- Initialize of a C760009_2 value
  -- Finalize   of a C760009_2 value
  -- Initialize of a C760009_1 value
  -- Adjust     of a C760009_1 value
  -- Finalize   of a C760009_1 value

  Global_Control : C760009_3.Master_Control;
  -- 1, 0, 1, 1, 0

  Parent_Control : C760009_2.Control;
  -- 1, 0, 1, 1, 0

  -- Global_Control is a derived tagged type, the parent type
  --   of Master_Control, Control, is derived from Controlled, and contains
  --   two components of a Controlled type, Simple_Control.  One of these
  --   components has a default value, the other does not.

  procedure Fail( Which: String; Expect, Got: Natural ) is
  begin
    Report.Failed(Which & " Expected" & Natural'Image(Expect)
                        & " got" & Natural'Image(Got) );
  end Fail;

  procedure Master_Assertion( Layer_2_Inits   : Natural;
                              Layer_2_Finals  : Natural;
                              Layer_1_Inits   : Natural;
                              Layer_1_Adjs    : Natural;
                              Layer_1_Finals  : Natural;
                              Failing_Message : String ) is

  begin


   if C760009_2.Initialized /= Layer_2_Inits then
     Fail("C760009_2.Initialize " & Failing_Message,
          Layer_2_Inits, C760009_2.Initialized );
   end if;

   if C760009_2.Finalized not in Layer_2_Finals..Layer_2_Finals*2 then
     Fail("C760009_2.Finalize " & Failing_Message,
           Layer_2_Finals, C760009_2.Finalized );
   end if;

   if C760009_1.Initialize_Called /= Layer_1_Inits then
     Fail("C760009_1.Initialize " & Failing_Message,
           Layer_1_Inits,
          C760009_1.Initialize_Called );
   end if;

   if C760009_1.Adjust_Called not in Layer_1_Adjs..Layer_1_Adjs*2 then
     Fail("C760009_1.Adjust " & Failing_Message,
           Layer_1_Adjs, C760009_1.Adjust_Called );
   end if;

   if C760009_1.Finalize_Called not in Layer_1_Finals..Layer_1_Finals*2 then
     Fail("C760009_1.Finalize " & Failing_Message,
           Layer_1_Finals, C760009_1.Finalize_Called );
   end if;

   C760009_1.Reset_Counters;
   C760009_2.Initialized := 0;
   C760009_2.Finalized   := 0;

  end Master_Assertion;

  procedure Lesser_Assertion( Layer_2_Inits   : Natural;
                              Layer_2_Finals  : Natural;
                              Layer_1_Inits   : Natural;
                              Layer_1_Adjs    : Natural;
                              Layer_1_Finals  : Natural;
                              Failing_Message : String ) is
  begin


   if C760009_2.Initialized > Layer_2_Inits then
     Fail("C760009_2.Initialize " & Failing_Message,
           Layer_2_Inits, C760009_2.Initialized );
   end if;

   if C760009_2.Finalized < Layer_2_Inits 
      or C760009_2.Finalized > Layer_2_Finals*2 then
     Fail("C760009_2.Finalize " & Failing_Message,
           Layer_2_Finals, C760009_2.Finalized );
   end if;

   if C760009_1.Initialize_Called > Layer_1_Inits then
     Fail("C760009_1.Initialize " & Failing_Message,
           Layer_1_Inits,
          C760009_1.Initialize_Called );
   end if;

   if C760009_1.Adjust_Called > Layer_1_Adjs*2 then
     Fail("C760009_1.Adjust " & Failing_Message,
           Layer_1_Adjs, C760009_1.Adjust_Called );
   end if;

   if C760009_1.Finalize_Called < Layer_1_Inits
      or C760009_1.Finalize_Called > Layer_1_Finals*2 then
     Fail("C760009_1.Finalize " & Failing_Message,
           Layer_1_Finals, C760009_1.Finalize_Called );
   end if;

   C760009_1.Reset_Counters;
   C760009_2.Initialized := 0;
   C760009_2.Finalized   := 0;

  end Lesser_Assertion;

begin  -- Main test procedure.

  Report.Test ("C760009", "Check that for an extension_aggregate whose " &
                          "ancestor_part is a subtype_mark, Initialize " &
                          "is called on all controlled subcomponents of " &
                          "the ancestor part.  Also check that the " &
                          "utilization of a controlled type for a generic " &
                          "actual parameter supports the correct behavior " &
                          "in the instantiated software" );

  C760009_1.TC_Trace( "=====> Case 0 <=====" );

  C760009_1.Reset_Counters;
  C760009_2.Initialized := 0;
  C760009_2.Finalized   := 0;

  C760009_3.Validate( Global_Control ); -- check that it Initialized correctly

  C760009_1.TC_Trace( "=====> Case 1 <=====" );

  C760009_3.Check_1.TC_Check_1( ( C760009_2.Control with Data => 1 ) );
  Lesser_Assertion( 2, 3, 2, 3, 6, "Check_1.TC_Check_1" );
  --                |  |  |  |  + Finalize 2 embedded in aggregate
  --                |  |  |  |  + Finalize 2 at assignment in TC_Check_1
  --                |  |  |  |  + Finalize 2 embedded in local variable
  --                |  |  |  + Adjust 2 caused by assignment in TC_Check_1
  --                |  |  |  + Adjust at declaration in TC_Check_1
  --                |  |  + Initialize at declaration in TC_Check_1
  --                |  |  + Initialize of aggregate object
  --                |  + Finalize of assignment target
  --                |  + Finalize of local variable
  --                |  + Finalize of aggregate object
  --               + Initialize of aggregate object
  --               + Initialize of local variable


  C760009_1.TC_Trace( "=====> Case 2 <=====" );

  C760009_3.Check_1.TC_Check_2( Global_Control );
  Master_Assertion( 1, 2, 1, 3, 4, "Check_1.TC_Check_2" );
  --                |  |  |  |  + Finalize 2 at assignment in TC_Check_2
  --                |  |  |  |  + Finalize 2 embedded in local variable
  --                |  |  |  + Adjust 2 caused by assignment in TC_Check_2
  --                |  |  |  + Adjust at declaration in TC_Check_2
  --                |  |  + Initialize at declaration in TC_Check_2
  --                |  + Finalize of assignment target
  --                |  + Finalize of local variable
  --               + Initialize of local variable


  C760009_1.TC_Trace( "=====> Case 3 <=====" );

  Global_Control := ( C760009_2.Control with Data => 2 );
  Lesser_Assertion( 1, 1, 1, 3, 2, "Aggregate -> object" );
  --                |  |  |  |  + Finalize 2 by assignment
  --                |  |  |  + Adjust 2 caused by assignment
  --                |  |  |  + Adjust in aggregate creation
  --                |  |  + Initialize of aggregate object
  --                |  + Finalize of assignment target
  --               + Initialize of aggregate object


  C760009_1.TC_Trace( "=====> Case 4 <=====" );

  C760009_3.Check_1.TC_Check_3( Global_Control );
  Master_Assertion( 1, 2, 1, 3, 4, "Check_1.TC_Check_3" );
  --                |  |  |  |  + Finalize 2 at assignment in TC_Check_3
  --                |  |  |  |  + Finalize 2 embedded in local variable
  --                |  |  |  + Adjust 2 at assignment in TC_Check_3
  --                |  |  |  + Adjust in local variable creation
  --                |  |  + Initialize of local variable in TC_Check_3
  --                |  + Finalize of assignment target
  --                |  + Finalize of local variable
  --               + Initialize of local variable


  C760009_1.TC_Trace( "=====> Case 5 <=====" );

  Global_Control := ( Parent_Control with Data => 3 );
  Lesser_Assertion( 1, 1, 1, 3, 2, "Object Aggregate -> object" );
  --                |  |  |  |  + Finalize 2 by assignment
  --                |  |  |  + Adjust 2 caused by assignment
  --                |  |  |  + Adjust in aggregate creation
  --                |  |  + Initialize of aggregate object
  --                |  + Finalize of assignment target
  --               + Initialize of aggregate object


  C760009_1.TC_Trace( "=====> Case 6 <=====" );

  -- perform this check a second time to make sure nothing is "remembered"

  C760009_3.Check_1.TC_Check_3( Global_Control );
  Master_Assertion( 1, 2, 1, 3, 4, "Check_1.TC_Check_3 second time" );
  --                |  |  |  |  + Finalize 2 at assignment in TC_Check_3
  --                |  |  |  |  + Finalize 2 embedded in local variable
  --                |  |  |  + Adjust 2 at assignment in TC_Check_3
  --                |  |  |  + Adjust in local variable creation
  --                |  |  + Initialize of local variable in TC_Check_3
  --                |  + Finalize of assignment target
  --                |  + Finalize of local variable
  --               + Initialize of local variable


  Report.Result;

end C760009;