;; GCC machine description for SSE instructions ;; Copyright (C) 2005 ;; Free Software Foundation, Inc. ;; ;; This file is part of GCC. ;; ;; GCC is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 2, or (at your option) ;; any later version. ;; ;; GCC is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; ;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING. If not, write to ;; the Free Software Foundation, 59 Temple Place - Suite 330, ;; Boston, MA 02111-1307, USA.
;; 16 byte integral modes handled by SSE, minus TImode, which gets ;; special-cased for TARGET_64BIT. (define_mode_macro SSEMODEI [V16QI V8HI V4SI V2DI])
;; All 16-byte vector modes handled by SSE (define_mode_macro SSEMODE [V16QI V8HI V4SI V2DI V4SF V2DF])
;; Mix-n-match (define_mode_macro SSEMODE12 [V16QI V8HI]) (define_mode_macro SSEMODE24 [V8HI V4SI]) (define_mode_macro SSEMODE124 [V16QI V8HI V4SI]) (define_mode_macro SSEMODE248 [V8HI V4SI V2DI])
;; Mapping from integer vector mode to mnemonic suffix (define_mode_attr ssevecsize [(V16QI “b”) (V8HI “w”) (V4SI “d”) (V2DI “q”)])
;; Patterns whose name begins with “sse{,2,3}_” are invoked by intrinsics.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Move patterns ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; All of these patterns are enabled for SSE1 as well as SSE2. ;; This is essential for maintaining stable calling conventions.
(define_expand “mov” [(set (match_operand:SSEMODEI 0 “nonimmediate_operand” "") (match_operand:SSEMODEI 1 “nonimmediate_operand” ""))] “TARGET_SSE” { ix86_expand_vector_move (mode, operands); DONE; })
;; APPLE LOCAL begin mainline (define_insn “*mov_internal” [(set (match_operand:SSEMODEI 0 “nonimmediate_operand” “=x,x ,m”) (match_operand:SSEMODEI 1 “nonimmediate_or_sse_const_operand” “C ,xm,x”))] ;; APPLE LOCAL end mainline “TARGET_SSE && !(MEM_P (operands[0]) && MEM_P (operands[1]))” { switch (which_alternative) { case 0: /* APPLE LOCAL mainline */ return standard_sse_constant_opcode (insn, operands[1]); case 1: case 2: if (get_attr_mode (insn) == MODE_V4SF) return “movaps\t{%1, %0|%0, %1}”; else return “movdqa\t{%1, %0|%0, %1}”; default: abort (); } } [(set_attr “type” “sselog1,ssemov,ssemov”) (set (attr “mode”) (cond [(eq (symbol_ref “TARGET_SSE2”) (const_int 0)) (const_string “V4SF”)
(eq_attr "alternative" "0,1")
(if_then_else
(ne (symbol_ref "optimize_size")
(const_int 0))
(const_string "V4SF")
(const_string "TI"))
(eq_attr "alternative" "2")
(if_then_else
(ior (ne (symbol_ref "TARGET_SSE_TYPELESS_STORES")
(const_int 0))
(ne (symbol_ref "optimize_size")
(const_int 0)))
(const_string "V4SF")
(const_string "TI"))]
(const_string "TI")))])
(define_expand “movv4sf” [(set (match_operand:V4SF 0 “nonimmediate_operand” "") (match_operand:V4SF 1 “nonimmediate_operand” ""))] “TARGET_SSE” { ix86_expand_vector_move (V4SFmode, operands); DONE; })
;; APPLE LOCAL begin mainline (define_insn “*movv4sf_internal” [(set (match_operand:V4SF 0 “nonimmediate_operand” “=x,x,m”) (match_operand:V4SF 1 “nonimmediate_or_sse_const_operand” “C,xm,x”))] “TARGET_SSE” { switch (which_alternative) { case 0: return standard_sse_constant_opcode (insn, operands[1]); case 1: case 2: return “movaps\t{%1, %0|%0, %1}”; default: abort(); } } [(set_attr “type” “sselog1,ssemov,ssemov”) (set_attr “mode” “V4SF”)])
;; APPLE LOCAL end mainline (define_split [(set (match_operand:V4SF 0 “register_operand” "") (match_operand:V4SF 1 “zero_extended_scalar_load_operand” ""))] “TARGET_SSE && reload_completed” [(set (match_dup 0) (vec_merge:V4SF (vec_duplicate:V4SF (match_dup 1)) (match_dup 2) (const_int 1)))] { operands[1] = simplify_gen_subreg (SFmode, operands[1], V4SFmode, 0); operands[2] = CONST0_RTX (V4SFmode); })
(define_expand “movv2df” [(set (match_operand:V2DF 0 “nonimmediate_operand” "") (match_operand:V2DF 1 “nonimmediate_operand” ""))] “TARGET_SSE” { ix86_expand_vector_move (V2DFmode, operands); DONE; })
;; APPLE LOCAL begin mainline (define_insn “*movv2df_internal” [(set (match_operand:V2DF 0 “nonimmediate_operand” “=x,x,m”) (match_operand:V2DF 1 “nonimmediate_or_sse_const_operand” “C,xm,x”))] “TARGET_SSE && !(MEM_P (operands[0]) && MEM_P (operands[1]))” { switch (which_alternative) { case 0: return standard_sse_constant_opcode (insn, operands[1]); case 1: case 2: if (get_attr_mode (insn) == MODE_V4SF) return “movaps\t{%1, %0|%0, %1}”; else return “movapd\t{%1, %0|%0, %1}”; default: abort (); } } [(set_attr “type” “sselog1,ssemov,ssemov”) (set (attr “mode”) (cond [(eq (symbol_ref “TARGET_SSE2”) (const_int 0)) (const_string “V4SF”) (eq_attr “alternative” “0,1”) (if_then_else (ne (symbol_ref “optimize_size”) (const_int 0)) (const_string “V4SF”) (const_string “V2DF”)) (eq_attr “alternative” “2”) (if_then_else (ior (ne (symbol_ref “TARGET_SSE_TYPELESS_STORES”) (const_int 0)) (ne (symbol_ref “optimize_size”) (const_int 0))) (const_string “V4SF”) (const_string “V2DF”))] (const_string “V2DF”)))])
;; APPLE LOCAL end mainline (define_split [(set (match_operand:V2DF 0 “register_operand” "") (match_operand:V2DF 1 “zero_extended_scalar_load_operand” ""))] “TARGET_SSE2 && reload_completed” [(set (match_dup 0) (vec_concat:V2DF (match_dup 1) (match_dup 2)))] { operands[1] = simplify_gen_subreg (DFmode, operands[1], V2DFmode, 0); operands[2] = CONST0_RTX (DFmode); })
(define_expand “push1” [(match_operand:SSEMODE 0 “register_operand” "")] “TARGET_SSE” { ix86_expand_push (mode, operands[0]); DONE; })
(define_expand “movmisalign” [(set (match_operand:SSEMODE 0 “nonimmediate_operand” "") (match_operand:SSEMODE 1 “nonimmediate_operand” ""))] “TARGET_SSE” { ix86_expand_vector_move_misalign (mode, operands); DONE; })
(define_insn “sse_movups” [(set (match_operand:V4SF 0 “nonimmediate_operand” “=x,m”) (unspec:V4SF [(match_operand:V4SF 1 “nonimmediate_operand” “xm,x”)] UNSPEC_MOVU))] “TARGET_SSE && !(MEM_P (operands[0]) && MEM_P (operands[1]))” “movups\t{%1, %0|%0, %1}” [(set_attr “type” “ssemov”) (set_attr “mode” “V2DF”)])
(define_insn “sse2_movupd” [(set (match_operand:V2DF 0 “nonimmediate_operand” “=x,m”) (unspec:V2DF [(match_operand:V2DF 1 “nonimmediate_operand” “xm,x”)] UNSPEC_MOVU))] “TARGET_SSE2 && !(MEM_P (operands[0]) && MEM_P (operands[1]))” “movupd\t{%1, %0|%0, %1}” [(set_attr “type” “ssemov”) (set_attr “mode” “V2DF”)])
(define_insn “sse2_movdqu” [(set (match_operand:V16QI 0 “nonimmediate_operand” “=x,m”) (unspec:V16QI [(match_operand:V16QI 1 “nonimmediate_operand” “xm,x”)] UNSPEC_MOVU))] “TARGET_SSE2 && !(MEM_P (operands[0]) && MEM_P (operands[1]))” “movdqu\t{%1, %0|%0, %1}” [(set_attr “type” “ssemov”) (set_attr “mode” “TI”)])
(define_insn “sse_movntv4sf” [(set (match_operand:V4SF 0 “memory_operand” “=m”) (unspec:V4SF [(match_operand:V4SF 1 “register_operand” “x”)] UNSPEC_MOVNT))] “TARGET_SSE” “movntps\t{%1, %0|%0, %1}” [(set_attr “type” “ssemov”) (set_attr “mode” “V4SF”)])
(define_insn “sse2_movntv2df” [(set (match_operand:V2DF 0 “memory_operand” “=m”) (unspec:V2DF [(match_operand:V2DF 1 “register_operand” “x”)] UNSPEC_MOVNT))] “TARGET_SSE2” “movntpd\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “V2DF”)])
(define_insn “sse2_movntv2di” [(set (match_operand:V2DI 0 “memory_operand” “=m”) (unspec:V2DI [(match_operand:V2DI 1 “register_operand” “x”)] UNSPEC_MOVNT))] “TARGET_SSE2” “movntdq\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “TI”)])
(define_insn “sse2_movntsi” [(set (match_operand:SI 0 “memory_operand” “=m”) (unspec:SI [(match_operand:SI 1 “register_operand” “r”)] UNSPEC_MOVNT))] “TARGET_SSE2” “movnti\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “V2DF”)])
;; APPLE LOCAL begin 4099020, 4121692 (define_insn “sse_loadqv4si” [(set (match_operand:V4SI 0 “register_operand” “=rx”) (unspec:V4SI [(zero_extend:V4SI (match_operand:V2SI 1 “memory_operand” “m”))] UNSPEC_LDQ))] “TARGET_SSE” “movq\t{%1, %0|%0, %1}”)
;; APPLE LOCAL begin 4279065 (define_insn “sse_storeqv4si” [(set (match_operand:V2SI 0 “memory_operand” “=m”) (unspec:V2SI [(match_operand:V4SI 1 “register_operand” “x”)] UNSPEC_STOQ))] “TARGET_SSE” “movq\t{%1, %0|%0, %1}”) ;; APPLE LOCAL end 4279065
(define_insn “sse_movqv4si” [(set (match_operand:V4SI 0 “register_operand” “=x”) (unspec:V4SI [(zero_extend:V4SI (subreg:V2SI (match_operand:V4SI 1 “register_operand” “x”) 0))] UNSPEC_MOVQ))] “TARGET_SSE” “movq\t{%1, %0|%0, %1}”) ;; APPLE LOCAL end 4099020, 4121692
(define_insn “sse3_lddqu” [(set (match_operand:V16QI 0 “register_operand” “=x”) (unspec:V16QI [(match_operand:V16QI 1 “memory_operand” “m”)] UNSPEC_LDQQU))] “TARGET_SSE3” “lddqu\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “TI”)])
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Parallel single-precision floating point arithmetic ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(define_expand “negv4sf2” [(set (match_operand:V4SF 0 “register_operand” "") (neg:V4SF (match_operand:V4SF 1 “nonimmediate_operand” "")))] “TARGET_SSE” “ix86_expand_fp_absneg_operator (NEG, V4SFmode, operands); DONE;”)
(define_expand “absv4sf2” [(set (match_operand:V4SF 0 “register_operand” "") (abs:V4SF (match_operand:V4SF 1 “nonimmediate_operand” "")))] “TARGET_SSE” “ix86_expand_fp_absneg_operator (ABS, V4SFmode, operands); DONE;”)
(define_expand “addv4sf3” [(set (match_operand:V4SF 0 “register_operand” "") (plus:V4SF (match_operand:V4SF 1 “nonimmediate_operand” "") (match_operand:V4SF 2 “nonimmediate_operand” "")))] “TARGET_SSE” “ix86_fixup_binary_operands_no_copy (PLUS, V4SFmode, operands);”)
(define_insn “*addv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (plus:V4SF (match_operand:V4SF 1 “nonimmediate_operand” “%0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE && ix86_binary_operator_ok (PLUS, V4SFmode, operands)” “addps\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “V4SF”)])
; APPLE LOCAL begin mainline (define_insn “sse_vmaddv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_merge:V4SF (plus:V4SF (match_operand:V4SF 1 “nonimmediate_operand” “0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)) (match_dup 1) (const_int 1)))] “TARGET_SSE && ix86_binary_operator_ok (PLUS, V4SFmode, operands)” “addss\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “SF”)]) ; APPLE LOCAL end mainline
(define_expand “subv4sf3” [(set (match_operand:V4SF 0 “register_operand” "") (minus:V4SF (match_operand:V4SF 1 “register_operand” "") (match_operand:V4SF 2 “nonimmediate_operand” "")))] “TARGET_SSE” “ix86_fixup_binary_operands_no_copy (MINUS, V4SFmode, operands);”)
(define_insn “*subv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (minus:V4SF (match_operand:V4SF 1 “register_operand” “0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE” “subps\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “V4SF”)])
(define_insn “sse_vmsubv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_merge:V4SF (minus:V4SF (match_operand:V4SF 1 “register_operand” “0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)) (match_dup 1) (const_int 1)))] “TARGET_SSE” “subss\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “SF”)])
(define_expand “mulv4sf3” [(set (match_operand:V4SF 0 “register_operand” "") (mult:V4SF (match_operand:V4SF 1 “nonimmediate_operand” "") (match_operand:V4SF 2 “nonimmediate_operand” "")))] “TARGET_SSE” “ix86_fixup_binary_operands_no_copy (MULT, V4SFmode, operands);”)
(define_insn “*mulv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (mult:V4SF (match_operand:V4SF 1 “nonimmediate_operand” “%0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE && ix86_binary_operator_ok (MULT, V4SFmode, operands)” “mulps\t{%2, %0|%0, %2}” [(set_attr “type” “ssemul”) (set_attr “mode” “V4SF”)])
; APPLE LOCAL begin mainline (define_insn “sse_vmmulv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_merge:V4SF (mult:V4SF (match_operand:V4SF 1 “nonimmediate_operand” “0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)) (match_dup 1) (const_int 1)))] “TARGET_SSE && ix86_binary_operator_ok (MULT, V4SFmode, operands)” “mulss\t{%2, %0|%0, %2}” [(set_attr “type” “ssemul”) (set_attr “mode” “SF”)]) ; APPLE LOCAL end mainline
(define_expand “divv4sf3” [(set (match_operand:V4SF 0 “register_operand” "") (div:V4SF (match_operand:V4SF 1 “register_operand” "") (match_operand:V4SF 2 “nonimmediate_operand” "")))] “TARGET_SSE” “ix86_fixup_binary_operands_no_copy (DIV, V4SFmode, operands);”)
(define_insn “*divv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (div:V4SF (match_operand:V4SF 1 “register_operand” “0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE” “divps\t{%2, %0|%0, %2}” [(set_attr “type” “ssediv”) (set_attr “mode” “V4SF”)])
(define_insn “sse_vmdivv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_merge:V4SF (div:V4SF (match_operand:V4SF 1 “register_operand” “0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)) (match_dup 1) (const_int 1)))] “TARGET_SSE” “divss\t{%2, %0|%0, %2}” [(set_attr “type” “ssediv”) (set_attr “mode” “SF”)])
(define_insn “sse_rcpv4sf2” [(set (match_operand:V4SF 0 “register_operand” “=x”) (unspec:V4SF [(match_operand:V4SF 1 “nonimmediate_operand” “xm”)] UNSPEC_RCP))] “TARGET_SSE” “rcpps\t{%1, %0|%0, %1}” [(set_attr “type” “sse”) (set_attr “mode” “V4SF”)])
(define_insn “sse_vmrcpv4sf2” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_merge:V4SF (unspec:V4SF [(match_operand:V4SF 1 “nonimmediate_operand” “xm”)] UNSPEC_RCP) (match_operand:V4SF 2 “register_operand” “0”) (const_int 1)))] “TARGET_SSE” “rcpss\t{%1, %0|%0, %1}” [(set_attr “type” “sse”) (set_attr “mode” “SF”)])
(define_insn “sse_rsqrtv4sf2” [(set (match_operand:V4SF 0 “register_operand” “=x”) (unspec:V4SF [(match_operand:V4SF 1 “nonimmediate_operand” “xm”)] UNSPEC_RSQRT))] “TARGET_SSE” “rsqrtps\t{%1, %0|%0, %1}” [(set_attr “type” “sse”) (set_attr “mode” “V4SF”)])
(define_insn “sse_vmrsqrtv4sf2” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_merge:V4SF (unspec:V4SF [(match_operand:V4SF 1 “nonimmediate_operand” “xm”)] UNSPEC_RSQRT) (match_operand:V4SF 2 “register_operand” “0”) (const_int 1)))] “TARGET_SSE” “rsqrtss\t{%1, %0|%0, %1}” [(set_attr “type” “sse”) (set_attr “mode” “SF”)])
(define_insn “sqrtv4sf2” [(set (match_operand:V4SF 0 “register_operand” “=x”) (sqrt:V4SF (match_operand:V4SF 1 “nonimmediate_operand” “xm”)))] “TARGET_SSE” “sqrtps\t{%1, %0|%0, %1}” [(set_attr “type” “sse”) (set_attr “mode” “V4SF”)])
(define_insn “sse_vmsqrtv4sf2” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_merge:V4SF (sqrt:V4SF (match_operand:V4SF 1 “nonimmediate_operand” “xm”)) (match_operand:V4SF 2 “register_operand” “0”) (const_int 1)))] “TARGET_SSE” “sqrtss\t{%1, %0|%0, %1}” [(set_attr “type” “sse”) (set_attr “mode” “SF”)])
;; ??? For !flag_finite_math_only, the representation with SMIN/SMAX ;; isn‘t really correct, as those rtl operators aren’t defined when ;; applied to NaNs. Hopefully the optimizers won't get too smart on us.
(define_expand “smaxv4sf3” [(set (match_operand:V4SF 0 “register_operand” "") (smax:V4SF (match_operand:V4SF 1 “nonimmediate_operand” "") (match_operand:V4SF 2 “nonimmediate_operand” "")))] “TARGET_SSE” { if (!flag_finite_math_only) operands[1] = force_reg (V4SFmode, operands[1]); ix86_fixup_binary_operands_no_copy (SMAX, V4SFmode, operands); })
(define_insn “*smaxv4sf3_finite” [(set (match_operand:V4SF 0 “register_operand” “=x”) (smax:V4SF (match_operand:V4SF 1 “nonimmediate_operand” “%0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE && flag_finite_math_only && ix86_binary_operator_ok (SMAX, V4SFmode, operands)” “maxps\t{%2, %0|%0, %2}” [(set_attr “type” “sse”) (set_attr “mode” “V4SF”)])
(define_insn “*smaxv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (smax:V4SF (match_operand:V4SF 1 “register_operand” “0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE” “maxps\t{%2, %0|%0, %2}” [(set_attr “type” “sse”) (set_attr “mode” “V4SF”)])
; APPLE LOCAL mainline ; sse_vmsmaxv4sf3_finite deleted
(define_insn “sse_vmsmaxv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_merge:V4SF (smax:V4SF (match_operand:V4SF 1 “register_operand” “0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)) (match_dup 1) (const_int 1)))] “TARGET_SSE” “maxss\t{%2, %0|%0, %2}” [(set_attr “type” “sse”) (set_attr “mode” “SF”)])
(define_expand “sminv4sf3” [(set (match_operand:V4SF 0 “register_operand” "") (smin:V4SF (match_operand:V4SF 1 “nonimmediate_operand” "") (match_operand:V4SF 2 “nonimmediate_operand” "")))] “TARGET_SSE” { if (!flag_finite_math_only) operands[1] = force_reg (V4SFmode, operands[1]); ix86_fixup_binary_operands_no_copy (SMIN, V4SFmode, operands); })
(define_insn “*sminv4sf3_finite” [(set (match_operand:V4SF 0 “register_operand” “=x”) (smin:V4SF (match_operand:V4SF 1 “nonimmediate_operand” “%0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE && flag_finite_math_only && ix86_binary_operator_ok (SMIN, V4SFmode, operands)” “minps\t{%2, %0|%0, %2}” [(set_attr “type” “sse”) (set_attr “mode” “V4SF”)])
(define_insn “*sminv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (smin:V4SF (match_operand:V4SF 1 “register_operand” “0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE” “minps\t{%2, %0|%0, %2}” [(set_attr “type” “sse”) (set_attr “mode” “V4SF”)])
; APPLE LOCAL mainline ; sse_vmsminv4sf3_finite deleted
(define_insn “sse_vmsminv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_merge:V4SF (smin:V4SF (match_operand:V4SF 1 “register_operand” “0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)) (match_dup 1) (const_int 1)))] “TARGET_SSE” “minss\t{%2, %0|%0, %2}” [(set_attr “type” “sse”) (set_attr “mode” “SF”)])
(define_insn “sse3_addsubv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_merge:V4SF (plus:V4SF (match_operand:V4SF 1 “register_operand” “0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)) (minus:V4SF (match_dup 1) (match_dup 2)) (const_int 5)))] “TARGET_SSE3” “addsubps\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “V4SF”)])
(define_insn “sse3_haddv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_concat:V4SF (vec_concat:V2SF (plus:SF (vec_select:SF (match_operand:V4SF 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:SF (match_dup 1) (parallel [(const_int 1)]))) (plus:SF (vec_select:SF (match_dup 1) (parallel [(const_int 2)])) (vec_select:SF (match_dup 1) (parallel [(const_int 3)])))) (vec_concat:V2SF (plus:SF (vec_select:SF (match_operand:V4SF 2 “nonimmediate_operand” “xm”) (parallel [(const_int 0)])) (vec_select:SF (match_dup 2) (parallel [(const_int 1)]))) (plus:SF (vec_select:SF (match_dup 2) (parallel [(const_int 2)])) (vec_select:SF (match_dup 2) (parallel [(const_int 3)]))))))] “TARGET_SSE3” “haddps\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “V4SF”)])
(define_insn “sse3_hsubv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_concat:V4SF (vec_concat:V2SF (minus:SF (vec_select:SF (match_operand:V4SF 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:SF (match_dup 1) (parallel [(const_int 1)]))) (minus:SF (vec_select:SF (match_dup 1) (parallel [(const_int 2)])) (vec_select:SF (match_dup 1) (parallel [(const_int 3)])))) (vec_concat:V2SF (minus:SF (vec_select:SF (match_operand:V4SF 2 “nonimmediate_operand” “xm”) (parallel [(const_int 0)])) (vec_select:SF (match_dup 2) (parallel [(const_int 1)]))) (minus:SF (vec_select:SF (match_dup 2) (parallel [(const_int 2)])) (vec_select:SF (match_dup 2) (parallel [(const_int 3)]))))))] “TARGET_SSE3” “hsubps\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “V4SF”)])
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Parallel single-precision floating point comparisons ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(define_insn “sse_maskcmpv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (match_operator:V4SF 3 “sse_comparison_operator” [(match_operand:V4SF 1 “register_operand” “0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)]))] “TARGET_SSE” “cmp%D3ps\t{%2, %0|%0, %2}” [(set_attr “type” “ssecmp”) (set_attr “mode” “V4SF”)])
(define_insn “sse_vmmaskcmpv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_merge:V4SF (match_operator:V4SF 3 “sse_comparison_operator” [(match_operand:V4SF 1 “register_operand” “0”) (match_operand:V4SF 2 “register_operand” “x”)]) (match_dup 1) (const_int 1)))] “TARGET_SSE” “cmp%D3ss\t{%2, %0|%0, %2}” [(set_attr “type” “ssecmp”) (set_attr “mode” “SF”)])
(define_insn “sse_comi” [(set (reg:CCFP FLAGS_REG) (compare:CCFP (vec_select:SF (match_operand:V4SF 0 “register_operand” “x”) (parallel [(const_int 0)])) (vec_select:SF (match_operand:V4SF 1 “nonimmediate_operand” “xm”) (parallel [(const_int 0)]))))] “TARGET_SSE” “comiss\t{%1, %0|%0, %1}” [(set_attr “type” “ssecomi”) (set_attr “mode” “SF”)])
(define_insn “sse_ucomi” [(set (reg:CCFPU FLAGS_REG) (compare:CCFPU (vec_select:SF (match_operand:V4SF 0 “register_operand” “x”) (parallel [(const_int 0)])) (vec_select:SF (match_operand:V4SF 1 “nonimmediate_operand” “xm”) (parallel [(const_int 0)]))))] “TARGET_SSE” “ucomiss\t{%1, %0|%0, %1}” [(set_attr “type” “ssecomi”) (set_attr “mode” “SF”)])
;; APPLE LOCAL begin mainline April 14, 2005 Radar 4053179 (define_expand “vcondv4sf” [(set (match_operand:V4SF 0 “register_operand” "") (if_then_else:V4SF (match_operator 3 "" [(match_operand:V4SF 4 “nonimmediate_operand” "") (match_operand:V4SF 5 “nonimmediate_operand” "")]) (match_operand:V4SF 1 “general_operand” "") (match_operand:V4SF 2 “general_operand” "")))] “TARGET_SSE” { if (ix86_expand_fp_vcond (operands)) DONE; else FAIL; }) ;; APPLE LOCAL end mainline April 14, 2005 Radar 4053179 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Parallel single-precision floating point logical operations ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(define_expand “andv4sf3” [(set (match_operand:V4SF 0 “register_operand” "") (and:V4SF (match_operand:V4SF 1 “nonimmediate_operand” "") (match_operand:V4SF 2 “nonimmediate_operand” "")))] “TARGET_SSE” “ix86_fixup_binary_operands_no_copy (AND, V4SFmode, operands);”)
(define_insn “*andv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (and:V4SF (match_operand:V4SF 1 “nonimmediate_operand” “%0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE && ix86_binary_operator_ok (AND, V4SFmode, operands)” “andps\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V4SF”)])
(define_insn “sse_nandv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (and:V4SF (not:V4SF (match_operand:V4SF 1 “register_operand” “0”)) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE” “andnps\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V4SF”)])
(define_expand “iorv4sf3” [(set (match_operand:V4SF 0 “register_operand” "") (ior:V4SF (match_operand:V4SF 1 “nonimmediate_operand” "") (match_operand:V4SF 2 “nonimmediate_operand” "")))] “TARGET_SSE” “ix86_fixup_binary_operands_no_copy (IOR, V4SFmode, operands);”)
(define_insn “*iorv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (ior:V4SF (match_operand:V4SF 1 “nonimmediate_operand” “%0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE && ix86_binary_operator_ok (IOR, V4SFmode, operands)” “orps\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V4SF”)])
(define_expand “xorv4sf3” [(set (match_operand:V4SF 0 “register_operand” "") (xor:V4SF (match_operand:V4SF 1 “nonimmediate_operand” "") (match_operand:V4SF 2 “nonimmediate_operand” "")))] “TARGET_SSE” “ix86_fixup_binary_operands_no_copy (XOR, V4SFmode, operands);”)
(define_insn “*xorv4sf3” [(set (match_operand:V4SF 0 “register_operand” “=x”) (xor:V4SF (match_operand:V4SF 1 “nonimmediate_operand” “%0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE && ix86_binary_operator_ok (XOR, V4SFmode, operands)” “xorps\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V4SF”)])
;; APPLE LOCAL begin mainline April 14, 2005 Radar 4053179 ;; Also define scalar versions. These are used for abs, neg, and ;; conditional move. Using subregs into vector modes causes regiser ;; allocation lossage. These patterns do not allow memory operands ;; because the native instructions read the full 128-bits.
(define_insn “*andsf3” [(set (match_operand:SF 0 “register_operand” “=x”) (and:SF (match_operand:SF 1 “register_operand” “0”) (match_operand:SF 2 “register_operand” “x”)))] “TARGET_SSE” “andps\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V4SF”)])
(define_insn “*nandsf3” [(set (match_operand:SF 0 “register_operand” “=x”) (and:SF (not:SF (match_operand:SF 1 “register_operand” “0”)) (match_operand:SF 2 “register_operand” “x”)))] “TARGET_SSE” “andnps\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V4SF”)])
(define_insn “*iorsf3” [(set (match_operand:SF 0 “register_operand” “=x”) (ior:SF (match_operand:SF 1 “register_operand” “0”) (match_operand:SF 2 “register_operand” “x”)))] “TARGET_SSE” “orps\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V4SF”)])
(define_insn “*xorsf3” [(set (match_operand:SF 0 “register_operand” “=x”) (xor:SF (match_operand:SF 1 “register_operand” “0”) (match_operand:SF 2 “register_operand” “x”)))] “TARGET_SSE” “xorps\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V4SF”)]) ;; APPLE LOCAL end mainline April 14, 2005 Radar 4053179 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Parallel single-precision floating point conversion operations ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(define_insn “sse_cvtpi2ps” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_merge:V4SF (vec_duplicate:V4SF (float:V2SF (match_operand:V2SI 2 “nonimmediate_operand” “ym”))) (match_operand:V4SF 1 “register_operand” “0”) (const_int 3)))] “TARGET_SSE” “cvtpi2ps\t{%2, %0|%0, %2}” [(set_attr “type” “ssecvt”) (set_attr “mode” “V4SF”)])
(define_insn “sse_cvtps2pi” [(set (match_operand:V2SI 0 “register_operand” “=y”) (vec_select:V2SI (unspec:V4SI [(match_operand:V4SF 1 “nonimmediate_operand” “xm”)] UNSPEC_FIX_NOTRUNC) (parallel [(const_int 0) (const_int 1)])))] “TARGET_SSE” “cvtps2pi\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “DI”)])
(define_insn “sse_cvttps2pi” [(set (match_operand:V2SI 0 “register_operand” “=y”) (vec_select:V2SI (fix:V4SI (match_operand:V4SF 1 “nonimmediate_operand” “xm”)) (parallel [(const_int 0) (const_int 1)])))] “TARGET_SSE” “cvttps2pi\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “SF”)])
(define_insn “sse_cvtsi2ss” [(set (match_operand:V4SF 0 “register_operand” “=x,x”) (vec_merge:V4SF (vec_duplicate:V4SF (float:SF (match_operand:SI 2 “nonimmediate_operand” “r,m”))) (match_operand:V4SF 1 “register_operand” “0,0”) (const_int 1)))] “TARGET_SSE” “cvtsi2ss\t{%2, %0|%0, %2}” [(set_attr “type” “sseicvt”) (set_attr “athlon_decode” “vector,double”) (set_attr “mode” “SF”)])
(define_insn “sse_cvtsi2ssq” [(set (match_operand:V4SF 0 “register_operand” “=x,x”) (vec_merge:V4SF (vec_duplicate:V4SF (float:SF (match_operand:DI 2 “nonimmediate_operand” “r,rm”))) (match_operand:V4SF 1 “register_operand” “0,0”) (const_int 1)))] “TARGET_SSE && TARGET_64BIT” “cvtsi2ssq\t{%2, %0|%0, %2}” [(set_attr “type” “sseicvt”) (set_attr “athlon_decode” “vector,double”) (set_attr “mode” “SF”)])
(define_insn “sse_cvtss2si” [(set (match_operand:SI 0 “register_operand” “=r,r”) (unspec:SI [(vec_select:SF (match_operand:V4SF 1 “nonimmediate_operand” “x,m”) (parallel [(const_int 0)]))] UNSPEC_FIX_NOTRUNC))] “TARGET_SSE” “cvtss2si\t{%1, %0|%0, %1}” [(set_attr “type” “sseicvt”) (set_attr “athlon_decode” “double,vector”) (set_attr “mode” “SI”)])
(define_insn “sse_cvtss2siq” [(set (match_operand:DI 0 “register_operand” “=r,r”) (unspec:DI [(vec_select:SF (match_operand:V4SF 1 “nonimmediate_operand” “x,m”) (parallel [(const_int 0)]))] UNSPEC_FIX_NOTRUNC))] “TARGET_SSE && TARGET_64BIT” “cvtss2siq\t{%1, %0|%0, %1}” [(set_attr “type” “sseicvt”) (set_attr “athlon_decode” “double,vector”) (set_attr “mode” “DI”)])
(define_insn “sse_cvttss2si” [(set (match_operand:SI 0 “register_operand” “=r,r”) (fix:SI (vec_select:SF (match_operand:V4SF 1 “nonimmediate_operand” “x,m”) (parallel [(const_int 0)]))))] “TARGET_SSE” “cvttss2si\t{%1, %0|%0, %1}” [(set_attr “type” “sseicvt”) (set_attr “athlon_decode” “double,vector”) (set_attr “mode” “SI”)])
(define_insn “sse_cvttss2siq” [(set (match_operand:DI 0 “register_operand” “=r,r”) (fix:DI (vec_select:SF (match_operand:V4SF 1 “nonimmediate_operand” “x,m”) (parallel [(const_int 0)]))))] “TARGET_SSE && TARGET_64BIT” “cvttss2siq\t{%1, %0|%0, %1}” [(set_attr “type” “sseicvt”) (set_attr “athlon_decode” “double,vector”) (set_attr “mode” “DI”)])
(define_insn “sse2_cvtdq2ps” [(set (match_operand:V4SF 0 “register_operand” “=x”) (float:V4SF (match_operand:V4SI 1 “nonimmediate_operand” “xm”)))] “TARGET_SSE2” “cvtdq2ps\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “V2DF”)])
(define_insn “sse2_cvtps2dq” [(set (match_operand:V4SI 0 “register_operand” “=x”) (unspec:V4SI [(match_operand:V4SF 1 “nonimmediate_operand” “xm”)] UNSPEC_FIX_NOTRUNC))] “TARGET_SSE2” “cvtps2dq\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “TI”)])
(define_insn “sse2_cvttps2dq” [(set (match_operand:V4SI 0 “register_operand” “=x”) (fix:V4SI (match_operand:V4SF 1 “nonimmediate_operand” “xm”)))] “TARGET_SSE2” “cvttps2dq\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “TI”)])
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Parallel single-precision floating point element swizzling ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; APPLE LOCAL begin 4332318 (define_insn “sse_movhlps” [(set (match_operand:V4SF 0 “nonimmediate_operand” “=x,x,m”) (vec_select:V4SF (vec_concat:V8SF (match_operand:V4SF 1 “nonimmediate_operand” " 0,0,0") (match_operand:V4SF 2 “nonimmediate_operand” " x,o,x")) (parallel [(const_int 6) (const_int 7) (const_int 2) (const_int 3)])))] “TARGET_SSE && !(MEM_P (operands[1]) && MEM_P (operands[2]))” “@ movhlps\t{%2, %0|%0, %2} movlps\t{%H2, %0|%0, %H2} movhps\t{%2, %0|%0, %2}” [(set_attr “type” “ssemov”) (set_attr “mode” “V4SF,V2SF,V2SF”)]) ;; APPLE LOCAL end 4332318
; APPLE LOCAL begin radar 4099352 (define_insn “sse_movlhps” [(set (match_operand:V4SF 0 “nonimmediate_operand” “=x,x,x,o”) (vec_select:V4SF (vec_concat:V8SF (match_operand:V4SF 1 “nonimmediate_operand” " 0,0,0,0") /* APPLE LOCAL mainline */ (match_operand:V4SF 2 “nonimmediate_or_0_operand” " C,x,m,x")) (parallel [(const_int 0) (const_int 1) (const_int 4) (const_int 5)])))] “TARGET_SSE && ix86_binary_operator_ok (UNKNOWN, V4SFmode, operands)” “@ xorps\t%0, %0 movlhps\t{%2, %0|%0, %2} movhps\t{%2, %0|%0, %2} movlps\t{%2, %H0|%H0, %2}” [(set_attr “type” “ssemov”) (set_attr “mode” “V4SF,V4SF,V2SF,V2SF”)]) ; APPLE LOCAL end radar 4099352
(define_insn “sse_unpckhps” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_select:V4SF (vec_concat:V8SF (match_operand:V4SF 1 “register_operand” “0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)) (parallel [(const_int 2) (const_int 6) (const_int 3) (const_int 7)])))] “TARGET_SSE” “unpckhps\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V4SF”)])
(define_insn “sse_unpcklps” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_select:V4SF (vec_concat:V8SF (match_operand:V4SF 1 “register_operand” “0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)) (parallel [(const_int 0) (const_int 4) (const_int 1) (const_int 5)])))] “TARGET_SSE” “unpcklps\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V4SF”)])
;; These are modeled with the same vec_concat as the others so that we ;; capture users of shufps that can use the new instructions (define_insn “sse3_movshdup” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_select:V4SF (vec_concat:V8SF (match_operand:V4SF 1 “nonimmediate_operand” “xm”) (match_dup 1)) (parallel [(const_int 1) (const_int 1) (const_int 7) (const_int 7)])))] “TARGET_SSE3” “movshdup\t{%1, %0|%0, %1}” [(set_attr “type” “sse”) (set_attr “mode” “V4SF”)])
(define_insn “sse3_movsldup” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_select:V4SF (vec_concat:V8SF (match_operand:V4SF 1 “nonimmediate_operand” “xm”) (match_dup 1)) (parallel [(const_int 0) (const_int 0) (const_int 6) (const_int 6)])))] “TARGET_SSE3” “movsldup\t{%1, %0|%0, %1}” [(set_attr “type” “sse”) (set_attr “mode” “V4SF”)])
(define_expand “sse_shufps” [(match_operand:V4SF 0 “register_operand” "") (match_operand:V4SF 1 “register_operand” "") (match_operand:V4SF 2 “nonimmediate_operand” "") (match_operand:SI 3 “const_int_operand” "")] “TARGET_SSE” { int mask = INTVAL (operands[3]); emit_insn (gen_sse_shufps_1 (operands[0], operands[1], operands[2], GEN_INT ((mask >> 0) & 3), GEN_INT ((mask >> 2) & 3), GEN_INT (((mask >> 4) & 3) + 4), GEN_INT (((mask >> 6) & 3) + 4))); DONE; })
(define_insn “sse_shufps_1” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_select:V4SF (vec_concat:V8SF (match_operand:V4SF 1 “register_operand” “0”) (match_operand:V4SF 2 “nonimmediate_operand” “xm”)) (parallel [(match_operand 3 “const_0_to_3_operand” "") (match_operand 4 “const_0_to_3_operand” "") (match_operand 5 “const_4_to_7_operand” "") (match_operand 6 “const_4_to_7_operand” "")])))] “TARGET_SSE” { int mask = 0; mask |= INTVAL (operands[3]) << 0; mask |= INTVAL (operands[4]) << 2; mask |= (INTVAL (operands[5]) - 4) << 4; mask |= (INTVAL (operands[6]) - 4) << 6; operands[3] = GEN_INT (mask);
return “shufps\t{%3, %2, %0|%0, %2, %3}”; } [(set_attr “type” “sselog”) (set_attr “mode” “V4SF”)])
(define_insn “sse_storehps” [(set (match_operand:V2SF 0 “nonimmediate_operand” “=m,x,x”) (vec_select:V2SF (match_operand:V4SF 1 “nonimmediate_operand” “x,x,o”) (parallel [(const_int 2) (const_int 3)])))] “TARGET_SSE” “@ movhps\t{%1, %0|%0, %1} movhlps\t{%1, %0|%0, %1} movlps\t{%H1, %0|%0, %H1}” [(set_attr “type” “ssemov”) (set_attr “mode” “V2SF,V4SF,V2SF”)])
(define_insn “sse_loadhps” [(set (match_operand:V4SF 0 “nonimmediate_operand” “=x,x,o”) (vec_concat:V4SF (vec_select:V2SF (match_operand:V4SF 1 “nonimmediate_operand” “0,0,0”) (parallel [(const_int 0) (const_int 1)])) (match_operand:V2SF 2 “nonimmediate_operand” “m,x,x”)))] “TARGET_SSE” “@ movhps\t{%2, %0|%0, %2} movlhps\t{%2, %0|%0, %2} movlps\t{%2, %H0|%H0, %2}” [(set_attr “type” “ssemov”) (set_attr “mode” “V2SF,V4SF,V2SF”)])
(define_insn “sse_storelps” [(set (match_operand:V2SF 0 “nonimmediate_operand” “=m,x,x”) (vec_select:V2SF (match_operand:V4SF 1 “nonimmediate_operand” “x,x,m”) (parallel [(const_int 0) (const_int 1)])))] “TARGET_SSE” “@ movlps\t{%1, %0|%0, %1} movaps\t{%1, %0|%0, %1} movlps\t{%1, %0|%0, %1}” [(set_attr “type” “ssemov”) (set_attr “mode” “V2SF,V4SF,V2SF”)])
(define_insn “sse_loadlps” [(set (match_operand:V4SF 0 “nonimmediate_operand” “=x,x,m”) (vec_concat:V4SF (match_operand:V2SF 2 “nonimmediate_operand” “0,m,x”) (vec_select:V2SF (match_operand:V4SF 1 “nonimmediate_operand” “x,0,0”) (parallel [(const_int 2) (const_int 3)]))))] “TARGET_SSE” “@ shufps\t{$0xe4, %1, %0|%0, %1, 0xe4} movlps\t{%2, %0|%0, %2} movlps\t{%2, %0|%0, %2}” [(set_attr “type” “sselog,ssemov,ssemov”) (set_attr “mode” “V4SF,V2SF,V2SF”)])
(define_insn “sse_movss” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_merge:V4SF (match_operand:V4SF 2 “register_operand” “x”) (match_operand:V4SF 1 “register_operand” “0”) (const_int 1)))] “TARGET_SSE” “movss\t{%2, %0|%0, %2}” [(set_attr “type” “ssemov”) (set_attr “mode” “SF”)])
(define_insn “*vec_dupv4sf” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_duplicate:V4SF (match_operand:SF 1 “register_operand” “0”)))] “TARGET_SSE” “shufps\t{$0, %0, %0|%0, %0, 0}” [(set_attr “type” “sselog1”) (set_attr “mode” “V4SF”)])
;; ??? In theory we can match memory for the MMX alternative, but allowing ;; nonimmediate_operand for operand 2 and not allowing memory for the SSE ;; alternatives pretty much forces the MMX alternative to be chosen. (define_insn “*sse_concatv2sf” [(set (match_operand:V2SF 0 “register_operand” “=x,x,*y,*y”) (vec_concat:V2SF (match_operand:SF 1 “nonimmediate_operand” " 0,m, 0, m") /* APPLE LOCAL mainline */ (match_operand:SF 2 “nonimmediate_or_0_operand” " x,C,*y, C")))] “TARGET_SSE” “@ unpcklps\t{%2, %0|%0, %2} movss\t{%1, %0|%0, %1} punpckldq\t{%2, %0|%0, %2} movd\t{%1, %0|%0, %1}” [(set_attr “type” “sselog,ssemov,mmxcvt,mmxmov”) (set_attr “mode” “V4SF,SF,DI,DI”)])
(define_insn “*sse_concatv4sf” [(set (match_operand:V4SF 0 “register_operand” “=x,x”) (vec_concat:V4SF (match_operand:V2SF 1 “register_operand” " 0,0") (match_operand:V2SF 2 “nonimmediate_operand” " x,m")))] “TARGET_SSE” “@ movlhps\t{%2, %0|%0, %2} movhps\t{%2, %0|%0, %2}” [(set_attr “type” “ssemov”) (set_attr “mode” “V4SF,V2SF”)])
(define_expand “vec_initv4sf” [(match_operand:V4SF 0 “register_operand” "") (match_operand 1 "" "")] “TARGET_SSE” { ix86_expand_vector_init (false, operands[0], operands[1]); DONE; })
(define_insn “*vec_setv4sf_0” [(set (match_operand:V4SF 0 “nonimmediate_operand” “=x,x,Y ,m”) (vec_merge:V4SF (vec_duplicate:V4SF (match_operand:SF 2 “general_operand” " x,m,r,xrfF")) /* APPLE LOCAL mainline */ (match_operand:V4SF 1 “nonimmediate_or_0_operand” " 0,C,C ,0") (const_int 1)))] “TARGET_SSE” “@ movss\t{%2, %0|%0, %2} movss\t{%2, %0|%0, %2} movd\t{%2, %0|%0, %2} #” [(set_attr “type” “ssemov”) (set_attr “mode” “SF”)])
(define_split [(set (match_operand:V4SF 0 “memory_operand” "") (vec_merge:V4SF (vec_duplicate:V4SF (match_operand:SF 1 “nonmemory_operand” "")) (match_dup 0) (const_int 1)))] “TARGET_SSE && reload_completed” [(const_int 0)] { emit_move_insn (adjust_address (operands[0], SFmode, 0), operands[1]); DONE; })
(define_expand “vec_setv4sf” [(match_operand:V4SF 0 “register_operand” "") (match_operand:SF 1 “register_operand” "") (match_operand 2 “const_int_operand” "")] “TARGET_SSE” { ix86_expand_vector_set (false, operands[0], operands[1], INTVAL (operands[2])); DONE; })
(define_insn_and_split “*vec_extractv4sf_0” [(set (match_operand:SF 0 “nonimmediate_operand” “=x,m,fr”) (vec_select:SF (match_operand:V4SF 1 “nonimmediate_operand” “xm,x,m”) (parallel [(const_int 0)])))] “TARGET_SSE && !(MEM_P (operands[0]) && MEM_P (operands[1]))” “#” “&& reload_completed” [(const_int 0)] { rtx op1 = operands[1]; if (REG_P (op1)) op1 = gen_rtx_REG (SFmode, REGNO (op1)); else op1 = gen_lowpart (SFmode, op1); emit_move_insn (operands[0], op1); DONE; })
(define_expand “vec_extractv4sf” [(match_operand:SF 0 “register_operand” "") (match_operand:V4SF 1 “register_operand” "") (match_operand 2 “const_int_operand” "")] “TARGET_SSE” { ix86_expand_vector_extract (false, operands[0], operands[1], INTVAL (operands[2])); DONE; })
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Parallel double-precision floating point arithmetic ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(define_expand “negv2df2” [(set (match_operand:V2DF 0 “register_operand” "") (neg:V2DF (match_operand:V2DF 1 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_expand_fp_absneg_operator (NEG, V2DFmode, operands); DONE;”)
(define_expand “absv2df2” [(set (match_operand:V2DF 0 “register_operand” "") (abs:V2DF (match_operand:V2DF 1 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_expand_fp_absneg_operator (ABS, V2DFmode, operands); DONE;”)
(define_expand “addv2df3” [(set (match_operand:V2DF 0 “register_operand” "") (plus:V2DF (match_operand:V2DF 1 “nonimmediate_operand” "") (match_operand:V2DF 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (PLUS, V2DFmode, operands);”)
(define_insn “*addv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (plus:V2DF (match_operand:V2DF 1 “nonimmediate_operand” “%0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (PLUS, V2DFmode, operands)” “addpd\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “V2DF”)])
; APPLE LOCAL begin mainline (define_insn “sse2_vmaddv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_merge:V2DF (plus:V2DF (match_operand:V2DF 1 “nonimmediate_operand” “0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)) (match_dup 1) (const_int 1)))] “TARGET_SSE2 && ix86_binary_operator_ok (PLUS, V4SFmode, operands)” “addsd\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “DF”)]) ; APPLE LOCAL end mainline
(define_expand “subv2df3” [(set (match_operand:V2DF 0 “register_operand” "") (minus:V2DF (match_operand:V2DF 1 “nonimmediate_operand” "") (match_operand:V2DF 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (MINUS, V2DFmode, operands);”)
(define_insn “*subv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (minus:V2DF (match_operand:V2DF 1 “register_operand” “0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2” “subpd\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “V2DF”)])
(define_insn “sse2_vmsubv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_merge:V2DF (minus:V2DF (match_operand:V2DF 1 “register_operand” “0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)) (match_dup 1) (const_int 1)))] “TARGET_SSE2” “subsd\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “DF”)])
(define_expand “mulv2df3” [(set (match_operand:V2DF 0 “register_operand” "") (mult:V2DF (match_operand:V2DF 1 “nonimmediate_operand” "") (match_operand:V2DF 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (MULT, V2DFmode, operands);”)
(define_insn “*mulv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (mult:V2DF (match_operand:V2DF 1 “nonimmediate_operand” “%0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (MULT, V2DFmode, operands)” “mulpd\t{%2, %0|%0, %2}” [(set_attr “type” “ssemul”) (set_attr “mode” “V2DF”)])
; APPLE LOCAL begin mainline (define_insn “sse2_vmmulv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_merge:V2DF (mult:V2DF (match_operand:V2DF 1 “nonimmediate_operand” “0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)) (match_dup 1) (const_int 1)))] “TARGET_SSE2 && ix86_binary_operator_ok (MULT, V2DFmode, operands)” “mulsd\t{%2, %0|%0, %2}” [(set_attr “type” “ssemul”) (set_attr “mode” “DF”)]) ; APPLE LOCAL end mainline
(define_expand “divv2df3” [(set (match_operand:V2DF 0 “register_operand” "") (div:V2DF (match_operand:V2DF 1 “register_operand” "") (match_operand:V2DF 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (DIV, V2DFmode, operands);”)
(define_insn “*divv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (div:V2DF (match_operand:V2DF 1 “register_operand” “0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2” “divpd\t{%2, %0|%0, %2}” [(set_attr “type” “ssediv”) (set_attr “mode” “V2DF”)])
(define_insn “sse2_vmdivv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_merge:V2DF (div:V2DF (match_operand:V2DF 1 “register_operand” “0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)) (match_dup 1) (const_int 1)))] “TARGET_SSE2” “divsd\t{%2, %0|%0, %2}” [(set_attr “type” “ssediv”) (set_attr “mode” “DF”)])
(define_insn “sqrtv2df2” [(set (match_operand:V2DF 0 “register_operand” “=x”) (sqrt:V2DF (match_operand:V2DF 1 “nonimmediate_operand” “xm”)))] “TARGET_SSE2” “sqrtpd\t{%1, %0|%0, %1}” [(set_attr “type” “sse”) (set_attr “mode” “V2DF”)])
(define_insn “sse2_vmsqrtv2df2” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_merge:V2DF (sqrt:V2DF (match_operand:V2DF 1 “register_operand” “xm”)) (match_operand:V2DF 2 “register_operand” “0”) (const_int 1)))] “TARGET_SSE2” “sqrtsd\t{%1, %0|%0, %1}” [(set_attr “type” “sse”) (set_attr “mode” “SF”)])
;; ??? For !flag_finite_math_only, the representation with SMIN/SMAX ;; isn‘t really correct, as those rtl operators aren’t defined when ;; applied to NaNs. Hopefully the optimizers won't get too smart on us.
(define_expand “smaxv2df3” [(set (match_operand:V2DF 0 “register_operand” "") (smax:V2DF (match_operand:V2DF 1 “nonimmediate_operand” "") (match_operand:V2DF 2 “nonimmediate_operand” "")))] “TARGET_SSE2” { if (!flag_finite_math_only) operands[1] = force_reg (V2DFmode, operands[1]); ix86_fixup_binary_operands_no_copy (SMAX, V2DFmode, operands); })
(define_insn “*smaxv2df3_finite” [(set (match_operand:V2DF 0 “register_operand” “=x”) (smax:V2DF (match_operand:V2DF 1 “nonimmediate_operand” “%0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && flag_finite_math_only && ix86_binary_operator_ok (SMAX, V2DFmode, operands)” “maxpd\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “V2DF”)])
(define_insn “*smaxv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (smax:V2DF (match_operand:V2DF 1 “register_operand” “0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2” “maxpd\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “V2DF”)])
; APPLE LOCAL mainline ; sse2_vmsmaxv2df3_finite deleted
(define_insn “sse2_vmsmaxv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_merge:V2DF (smax:V2DF (match_operand:V2DF 1 “register_operand” “0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)) (match_dup 1) (const_int 1)))] “TARGET_SSE2” “maxsd\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “DF”)])
(define_expand “sminv2df3” [(set (match_operand:V2DF 0 “register_operand” "") (smin:V2DF (match_operand:V2DF 1 “nonimmediate_operand” "") (match_operand:V2DF 2 “nonimmediate_operand” "")))] “TARGET_SSE2” { if (!flag_finite_math_only) operands[1] = force_reg (V2DFmode, operands[1]); ix86_fixup_binary_operands_no_copy (SMIN, V2DFmode, operands); })
(define_insn “*sminv2df3_finite” [(set (match_operand:V2DF 0 “register_operand” “=x”) (smin:V2DF (match_operand:V2DF 1 “nonimmediate_operand” “%0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && flag_finite_math_only && ix86_binary_operator_ok (SMIN, V2DFmode, operands)” “minpd\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “V2DF”)])
(define_insn “*sminv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (smin:V2DF (match_operand:V2DF 1 “register_operand” “0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2” “minpd\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “V2DF”)])
; APPLE LOCAL mainline ; sse2_vmsminv2df3_finite deleted
(define_insn “sse2_vmsminv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_merge:V2DF (smin:V2DF (match_operand:V2DF 1 “register_operand” “0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)) (match_dup 1) (const_int 1)))] “TARGET_SSE2” “minsd\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “DF”)])
(define_insn “sse3_addsubv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_merge:V2DF (plus:V2DF (match_operand:V2DF 1 “register_operand” “0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)) (minus:V2DF (match_dup 1) (match_dup 2)) (const_int 1)))] “TARGET_SSE3” “addsubpd\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “V2DF”)])
(define_insn “sse3_haddv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_concat:V2DF (plus:DF (vec_select:DF (match_operand:V2DF 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:DF (match_dup 1) (parallel [(const_int 1)]))) (plus:DF (vec_select:DF (match_operand:V2DF 2 “nonimmediate_operand” “xm”) (parallel [(const_int 0)])) (vec_select:DF (match_dup 2) (parallel [(const_int 1)])))))] “TARGET_SSE3” “haddpd\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “V2DF”)])
(define_insn “sse3_hsubv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_concat:V2DF (minus:DF (vec_select:DF (match_operand:V2DF 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:DF (match_dup 1) (parallel [(const_int 1)]))) (minus:DF (vec_select:DF (match_operand:V2DF 2 “nonimmediate_operand” “xm”) (parallel [(const_int 0)])) (vec_select:DF (match_dup 2) (parallel [(const_int 1)])))))] “TARGET_SSE3” “hsubpd\t{%2, %0|%0, %2}” [(set_attr “type” “sseadd”) (set_attr “mode” “V2DF”)])
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Parallel double-precision floating point comparisons ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(define_insn “sse2_maskcmpv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (match_operator:V2DF 3 “sse_comparison_operator” [(match_operand:V2DF 1 “register_operand” “0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)]))] “TARGET_SSE2” “cmp%D3pd\t{%2, %0|%0, %2}” [(set_attr “type” “ssecmp”) (set_attr “mode” “V2DF”)])
(define_insn “sse2_vmmaskcmpv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_merge:V2DF (match_operator:V2DF 3 “sse_comparison_operator” [(match_operand:V2DF 1 “register_operand” “0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)]) (match_dup 1) (const_int 1)))] “TARGET_SSE2” “cmp%D3sd\t{%2, %0|%0, %2}” [(set_attr “type” “ssecmp”) (set_attr “mode” “DF”)])
(define_insn “sse2_comi” [(set (reg:CCFP FLAGS_REG) (compare:CCFP (vec_select:DF (match_operand:V2DF 0 “register_operand” “x”) (parallel [(const_int 0)])) (vec_select:DF (match_operand:V2DF 1 “nonimmediate_operand” “xm”) (parallel [(const_int 0)]))))] “TARGET_SSE2” “comisd\t{%1, %0|%0, %1}” [(set_attr “type” “ssecomi”) (set_attr “mode” “DF”)])
(define_insn “sse2_ucomi” [(set (reg:CCFPU FLAGS_REG) (compare:CCFPU (vec_select:DF (match_operand:V2DF 0 “register_operand” “x”) (parallel [(const_int 0)])) (vec_select:DF (match_operand:V2DF 1 “nonimmediate_operand” “xm”) (parallel [(const_int 0)]))))] “TARGET_SSE2” “ucomisd\t{%1, %0|%0, %1}” [(set_attr “type” “ssecomi”) (set_attr “mode” “DF”)])
;; APPLE LOCAL begin mainline April 14, 2005 Radar 4053179 (define_expand “vcondv2df” [(set (match_operand:V2DF 0 “register_operand” "") (if_then_else:V2DF (match_operator 3 "" [(match_operand:V2DF 4 “nonimmediate_operand” "") (match_operand:V2DF 5 “nonimmediate_operand” "")]) (match_operand:V2DF 1 “general_operand” "") (match_operand:V2DF 2 “general_operand” "")))] “TARGET_SSE2” { if (ix86_expand_fp_vcond (operands)) DONE; else FAIL; }) ;; APPLE LOCAL end mainline April 14, 2005 Radar 4053179 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Parallel double-precision floating point logical operations ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(define_expand “andv2df3” [(set (match_operand:V2DF 0 “register_operand” "") (and:V2DF (match_operand:V2DF 1 “nonimmediate_operand” "") (match_operand:V2DF 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (AND, V2DFmode, operands);”)
(define_insn “*andv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (and:V2DF (match_operand:V2DF 1 “nonimmediate_operand” “%0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)))] ;; APPLE LOCAL mainline April 14, 2005 Radar 4053179 “TARGET_SSE2 && ix86_binary_operator_ok (AND, V2DFmode, operands)” “andpd\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V2DF”)])
(define_insn “sse2_nandv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (and:V2DF (not:V2DF (match_operand:V2DF 1 “register_operand” “0”)) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2” “andnpd\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V2DF”)])
(define_expand “iorv2df3” [(set (match_operand:V2DF 0 “register_operand” "") (ior:V2DF (match_operand:V2DF 1 “nonimmediate_operand” "") (match_operand:V2DF 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (IOR, V2DFmode, operands);”)
(define_insn “*iorv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (ior:V2DF (match_operand:V2DF 1 “nonimmediate_operand” “%0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (IOR, V2DFmode, operands)” “orpd\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V2DF”)])
(define_expand “xorv2df3” [(set (match_operand:V2DF 0 “register_operand” "") (xor:V2DF (match_operand:V2DF 1 “nonimmediate_operand” "") (match_operand:V2DF 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (XOR, V2DFmode, operands);”)
(define_insn “*xorv2df3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (xor:V2DF (match_operand:V2DF 1 “nonimmediate_operand” “%0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (XOR, V2DFmode, operands)” “xorpd\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V2DF”)])
;; APPLE LOCAL begin mainline April 14, 2005 Radar 4053179 ;; Also define scalar versions. These are used for abs, neg, and ;; conditional move. Using subregs into vector modes causes regiser ;; allocation lossage. These patterns do not allow memory operands ;; because the native instructions read the full 128-bits.
(define_insn “*anddf3” [(set (match_operand:DF 0 “register_operand” “=x”) (and:DF (match_operand:DF 1 “register_operand” “0”) (match_operand:DF 2 “register_operand” “x”)))] “TARGET_SSE2” “andpd\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V2DF”)])
(define_insn “*nanddf3” [(set (match_operand:DF 0 “register_operand” “=x”) (and:DF (not:DF (match_operand:DF 1 “register_operand” “0”)) (match_operand:DF 2 “register_operand” “x”)))] “TARGET_SSE2” “andnpd\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V2DF”)])
(define_insn “*iordf3” [(set (match_operand:DF 0 “register_operand” “=x”) (ior:DF (match_operand:DF 1 “register_operand” “0”) (match_operand:DF 2 “register_operand” “x”)))] “TARGET_SSE2” “orpd\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V2DF”)])
(define_insn “*xordf3” [(set (match_operand:DF 0 “register_operand” “=x”) (xor:DF (match_operand:DF 1 “register_operand” “0”) (match_operand:DF 2 “register_operand” “x”)))] “TARGET_SSE2” “xorpd\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “V2DF”)]) ;; APPLE LOCAL end mainline April 14, 2005 Radar 4053179 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Parallel double-precision floating point conversion operations ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(define_insn “sse2_cvtpi2pd” [(set (match_operand:V2DF 0 “register_operand” “=x”) (float:V2DF (match_operand:V2SI 1 “nonimmediate_operand” “ym”)))] “TARGET_SSE2” “cvtpi2pd\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “V2DF”)])
(define_insn “sse2_cvtpd2pi” [(set (match_operand:V2SI 0 “register_operand” “=y”) (unspec:V2SI [(match_operand:V2DF 1 “nonimmediate_operand” “xm”)] UNSPEC_FIX_NOTRUNC))] “TARGET_SSE2” “cvtpd2pi\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “DI”)])
(define_insn “sse2_cvttpd2pi” [(set (match_operand:V2SI 0 “register_operand” “=y”) (fix:V2SI (match_operand:V2DF 1 “nonimmediate_operand” “xm”)))] “TARGET_SSE2” “cvttpd2pi\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “TI”)])
(define_insn “sse2_cvtsi2sd” [(set (match_operand:V2DF 0 “register_operand” “=x,x”) (vec_merge:V2DF (vec_duplicate:V2DF (float:DF (match_operand:SI 2 “nonimmediate_operand” “r,m”))) (match_operand:V2DF 1 “register_operand” “0,0”) (const_int 1)))] “TARGET_SSE2” “cvtsi2sd\t{%2, %0|%0, %2}” [(set_attr “type” “sseicvt”) (set_attr “mode” “DF”) (set_attr “athlon_decode” “double,direct”)])
(define_insn “sse2_cvtsi2sdq” [(set (match_operand:V2DF 0 “register_operand” “=x,x”) (vec_merge:V2DF (vec_duplicate:V2DF (float:DF (match_operand:DI 2 “nonimmediate_operand” “r,m”))) (match_operand:V2DF 1 “register_operand” “0,0”) (const_int 1)))] “TARGET_SSE2 && TARGET_64BIT” “cvtsi2sdq\t{%2, %0|%0, %2}” [(set_attr “type” “sseicvt”) (set_attr “mode” “DF”) (set_attr “athlon_decode” “double,direct”)])
(define_insn “sse2_cvtsd2si” [(set (match_operand:SI 0 “register_operand” “=r,r”) (unspec:SI [(vec_select:DF (match_operand:V2DF 1 “nonimmediate_operand” “x,m”) (parallel [(const_int 0)]))] UNSPEC_FIX_NOTRUNC))] “TARGET_SSE2” “cvtsd2si\t{%1, %0|%0, %1}” [(set_attr “type” “sseicvt”) (set_attr “athlon_decode” “double,vector”) (set_attr “mode” “SI”)])
(define_insn “sse2_cvtsd2siq” [(set (match_operand:DI 0 “register_operand” “=r,r”) (unspec:DI [(vec_select:DF (match_operand:V2DF 1 “nonimmediate_operand” “x,m”) (parallel [(const_int 0)]))] UNSPEC_FIX_NOTRUNC))] “TARGET_SSE2 && TARGET_64BIT” “cvtsd2siq\t{%1, %0|%0, %1}” [(set_attr “type” “sseicvt”) (set_attr “athlon_decode” “double,vector”) (set_attr “mode” “DI”)])
(define_insn “sse2_cvttsd2si” [(set (match_operand:SI 0 “register_operand” “=r,r”) (fix:SI (vec_select:DF (match_operand:V2DF 1 “nonimmediate_operand” “x,m”) (parallel [(const_int 0)]))))] “TARGET_SSE2” “cvttsd2si\t{%1, %0|%0, %1}” [(set_attr “type” “sseicvt”) (set_attr “mode” “SI”) (set_attr “athlon_decode” “double,vector”)])
(define_insn “sse2_cvttsd2siq” [(set (match_operand:DI 0 “register_operand” “=r,r”) (fix:DI (vec_select:DF (match_operand:V2DF 1 “nonimmediate_operand” “x,m”) (parallel [(const_int 0)]))))] “TARGET_SSE2 && TARGET_64BIT” “cvttsd2siq\t{%1, %0|%0, %1}” [(set_attr “type” “sseicvt”) (set_attr “mode” “DI”) (set_attr “athlon_decode” “double,vector”)])
(define_insn “sse2_cvtdq2pd” [(set (match_operand:V2DF 0 “register_operand” “=x”) (float:V2DF (vec_select:V2SI (match_operand:V4SI 1 “nonimmediate_operand” “xm”) (parallel [(const_int 0) (const_int 1)]))))] “TARGET_SSE2” “cvtdq2pd\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “V2DF”)])
(define_expand “sse2_cvtpd2dq” [(set (match_operand:V4SI 0 “register_operand” "") (vec_concat:V4SI (unspec:V2SI [(match_operand:V2DF 1 “nonimmediate_operand” "")] UNSPEC_FIX_NOTRUNC) (match_dup 2)))] “TARGET_SSE2” “operands[2] = CONST0_RTX (V2SImode);”)
(define_insn “*sse2_cvtpd2dq” [(set (match_operand:V4SI 0 “register_operand” “=x”) (vec_concat:V4SI (unspec:V2SI [(match_operand:V2DF 1 “nonimmediate_operand” “xm”)] UNSPEC_FIX_NOTRUNC) (match_operand:V2SI 2 “const0_operand” "")))] “TARGET_SSE2” “cvtpd2dq\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “TI”)])
(define_expand “sse2_cvttpd2dq” [(set (match_operand:V4SI 0 “register_operand” "") (vec_concat:V4SI (fix:V2SI (match_operand:V2DF 1 “nonimmediate_operand” "")) (match_dup 2)))] “TARGET_SSE2” “operands[2] = CONST0_RTX (V2SImode);”)
(define_insn “*sse2_cvttpd2dq” [(set (match_operand:V4SI 0 “register_operand” “=x”) (vec_concat:V4SI (fix:V2SI (match_operand:V2DF 1 “nonimmediate_operand” “xm”)) (match_operand:V2SI 2 “const0_operand” "")))] “TARGET_SSE2” “cvttpd2dq\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “TI”)])
(define_insn “sse2_cvtsd2ss” [(set (match_operand:V4SF 0 “register_operand” “=x,x”) (vec_merge:V4SF (vec_duplicate:V4SF (float_truncate:V2SF (match_operand:V2DF 2 “nonimmediate_operand” “x,m”))) (match_operand:V4SF 1 “register_operand” “0,0”) (const_int 1)))] “TARGET_SSE2” “cvtsd2ss\t{%2, %0|%0, %2}” [(set_attr “type” “ssecvt”) (set_attr “athlon_decode” “vector,double”) (set_attr “mode” “SF”)])
(define_insn “sse2_cvtss2sd” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_merge:V2DF (float_extend:V2DF (vec_select:V2SF (match_operand:V4SF 2 “nonimmediate_operand” “xm”) (parallel [(const_int 0) (const_int 1)]))) (match_operand:V2DF 1 “register_operand” “0”) (const_int 1)))] “TARGET_SSE2” “cvtss2sd\t{%2, %0|%0, %2}” [(set_attr “type” “ssecvt”) (set_attr “mode” “DF”)])
(define_expand “sse2_cvtpd2ps” [(set (match_operand:V4SF 0 “register_operand” "") (vec_concat:V4SF (float_truncate:V2SF (match_operand:V2DF 1 “nonimmediate_operand” “xm”)) (match_dup 2)))] “TARGET_SSE2” “operands[2] = CONST0_RTX (V2SFmode);”)
(define_insn “*sse2_cvtpd2ps” [(set (match_operand:V4SF 0 “register_operand” “=x”) (vec_concat:V4SF (float_truncate:V2SF (match_operand:V2DF 1 “nonimmediate_operand” “xm”)) (match_operand:V2SF 2 “const0_operand” "")))] “TARGET_SSE2” “cvtpd2ps\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “V4SF”)])
(define_insn “sse2_cvtps2pd” [(set (match_operand:V2DF 0 “register_operand” “=x”) (float_extend:V2DF (vec_select:V2SF (match_operand:V4SF 1 “nonimmediate_operand” “xm”) (parallel [(const_int 0) (const_int 1)]))))] “TARGET_SSE2” “cvtps2pd\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “V2DF”)])
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Parallel double-precision floating point element swizzling ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(define_insn “sse2_unpckhpd” [(set (match_operand:V2DF 0 “nonimmediate_operand” “=x,x,m”) (vec_select:V2DF (vec_concat:V4DF (match_operand:V2DF 1 “nonimmediate_operand” " 0,o,x") (match_operand:V2DF 2 “nonimmediate_operand” " x,0,0")) (parallel [(const_int 1) (const_int 3)])))] “TARGET_SSE2 && !(MEM_P (operands[1]) && MEM_P (operands[2]))” “@ unpckhpd\t{%2, %0|%0, %2} movlpd\t{%H1, %0|%0, %H1} movhpd\t{%1, %0|%0, %1}” [(set_attr “type” “sselog,ssemov,ssemov”) (set_attr “mode” “V2DF,V1DF,V1DF”)])
(define_insn “*sse3_movddup” [(set (match_operand:V2DF 0 “nonimmediate_operand” “=x,o”) (vec_select:V2DF (vec_concat:V4DF (match_operand:V2DF 1 “nonimmediate_operand” “xm,x”) (match_dup 1)) (parallel [(const_int 0) (const_int 2)])))] “TARGET_SSE3 && !(MEM_P (operands[1]) && MEM_P (operands[2]))” “@ movddup\t{%1, %0|%0, %1} #” [(set_attr “type” “sselog,ssemov”) (set_attr “mode” “V2DF”)])
(define_split [(set (match_operand:V2DF 0 “memory_operand” "") (vec_select:V2DF (vec_concat:V4DF (match_operand:V2DF 1 “register_operand” "") (match_dup 1)) (parallel [(const_int 0) (const_int 2)])))] “TARGET_SSE3 && reload_completed” [(const_int 0)] { rtx low = gen_rtx_REG (DFmode, REGNO (operands[1])); emit_move_insn (adjust_address (operands[0], DFmode, 0), low); emit_move_insn (adjust_address (operands[0], DFmode, 8), low); DONE; })
(define_insn “sse2_unpcklpd” [(set (match_operand:V2DF 0 “nonimmediate_operand” “=x,x,o”) (vec_select:V2DF (vec_concat:V4DF (match_operand:V2DF 1 “nonimmediate_operand” " 0,0,0") (match_operand:V2DF 2 “nonimmediate_operand” " x,m,x")) (parallel [(const_int 0) (const_int 2)])))] “TARGET_SSE2 && !(MEM_P (operands[1]) && MEM_P (operands[2]))” “@ unpcklpd\t{%2, %0|%0, %2} movhpd\t{%2, %0|%0, %2} movlpd\t{%2, %H0|%H0, %2}” [(set_attr “type” “sselog,ssemov,ssemov”) (set_attr “mode” “V2DF,V1DF,V1DF”)])
(define_expand “sse2_shufpd” [(match_operand:V2DF 0 “register_operand” "") (match_operand:V2DF 1 “register_operand” "") (match_operand:V2DF 2 “nonimmediate_operand” "") (match_operand:SI 3 “const_int_operand” "")] “TARGET_SSE2” { int mask = INTVAL (operands[3]); emit_insn (gen_sse2_shufpd_1 (operands[0], operands[1], operands[2], GEN_INT (mask & 1), GEN_INT (mask & 2 ? 3 : 2))); DONE; })
(define_insn “sse2_shufpd_1” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_select:V2DF (vec_concat:V4DF (match_operand:V2DF 1 “register_operand” “0”) (match_operand:V2DF 2 “nonimmediate_operand” “xm”)) (parallel [(match_operand 3 “const_0_to_1_operand” "") (match_operand 4 “const_2_to_3_operand” "")])))] “TARGET_SSE2” { int mask; mask = INTVAL (operands[3]); mask |= (INTVAL (operands[4]) - 2) << 1; operands[3] = GEN_INT (mask);
return “shufpd\t{%3, %2, %0|%0, %2, %3}”; } [(set_attr “type” “sselog”) (set_attr “mode” “V2DF”)])
(define_insn “sse2_storehpd” [(set (match_operand:DF 0 “nonimmediate_operand” “=m,x,x*fr”) (vec_select:DF (match_operand:V2DF 1 “nonimmediate_operand” " x,0,o") (parallel [(const_int 1)])))] “TARGET_SSE2 && !(MEM_P (operands[0]) && MEM_P (operands[1]))” “@ movhpd\t{%1, %0|%0, %1} unpckhpd\t%0, %0 #” [(set_attr “type” “ssemov,sselog1,ssemov”) (set_attr “mode” “V1DF,V2DF,DF”)])
(define_split [(set (match_operand:DF 0 “register_operand” "") (vec_select:DF (match_operand:V2DF 1 “memory_operand” "") (parallel [(const_int 1)])))] “TARGET_SSE2 && reload_completed” [(set (match_dup 0) (match_dup 1))] { operands[1] = adjust_address (operands[1], DFmode, 8); })
(define_insn “sse2_storelpd” [(set (match_operand:DF 0 “nonimmediate_operand” “=m,x,x*fr”) (vec_select:DF (match_operand:V2DF 1 “nonimmediate_operand” " x,x,m") (parallel [(const_int 0)])))] “TARGET_SSE2 && !(MEM_P (operands[0]) && MEM_P (operands[1]))” "@ movlpd\t{%1, %0|%0, %1}
#" [(set_attr “type” “ssemov”) (set_attr “mode” “V1DF,DF,DF”)])
(define_split [(set (match_operand:DF 0 “register_operand” "") (vec_select:DF (match_operand:V2DF 1 “nonimmediate_operand” "") (parallel [(const_int 0)])))] “TARGET_SSE2 && reload_completed” [(const_int 0)] { rtx op1 = operands[1]; if (REG_P (op1)) op1 = gen_rtx_REG (DFmode, REGNO (op1)); else op1 = gen_lowpart (DFmode, op1); emit_move_insn (operands[0], op1); DONE; })
(define_insn “sse2_loadhpd” [(set (match_operand:V2DF 0 “nonimmediate_operand” “=x,x,x,o”) (vec_concat:V2DF (vec_select:DF (match_operand:V2DF 1 “nonimmediate_operand” " 0,0,x,0") (parallel [(const_int 0)])) (match_operand:DF 2 “nonimmediate_operand” " m,x,0,x*fr")))] “TARGET_SSE2 && !(MEM_P (operands[1]) && MEM_P (operands[2]))” “@ movhpd\t{%2, %0|%0, %2} unpcklpd\t{%2, %0|%0, %2} shufpd\t{$1, %1, %0|%0, %1, 1} #” [(set_attr “type” “ssemov,sselog,sselog,other”) (set_attr “mode” “V1DF,V2DF,V2DF,DF”)])
(define_split [(set (match_operand:V2DF 0 “memory_operand” "") (vec_concat:V2DF (vec_select:DF (match_dup 0) (parallel [(const_int 0)])) (match_operand:DF 1 “register_operand” "")))] “TARGET_SSE2 && reload_completed” [(set (match_dup 0) (match_dup 1))] { operands[0] = adjust_address (operands[0], DFmode, 8); })
(define_insn “sse2_loadlpd” [(set (match_operand:V2DF 0 “nonimmediate_operand” “=x,x,x,x,x,m”) (vec_concat:V2DF (match_operand:DF 2 “nonimmediate_operand” " m,m,x,0,0,xfr") (vec_select:DF / APPLE LOCAL mainline */ (match_operand:V2DF 1 “nonimmediate_or_0_operand” " C,0,0,x,o,0") (parallel [(const_int 1)]))))] “TARGET_SSE2 && !(MEM_P (operands[1]) && MEM_P (operands[2]))” “@ movsd\t{%2, %0|%0, %2} movlpd\t{%2, %0|%0, %2} movsd\t{%2, %0|%0, %2} shufpd\t{$2, %2, %0|%0, %2, 2} movhpd\t{%H1, %0|%0, %H1} #” [(set_attr “type” “ssemov,ssemov,ssemov,sselog,ssemov,other”) (set_attr “mode” “DF,V1DF,V1DF,V2DF,V1DF,DF”)])
(define_split [(set (match_operand:V2DF 0 “memory_operand” "") (vec_concat:V2DF (match_operand:DF 1 “register_operand” "") (vec_select:DF (match_dup 0) (parallel [(const_int 1)]))))] “TARGET_SSE2 && reload_completed” [(set (match_dup 0) (match_dup 1))] { operands[0] = adjust_address (operands[0], DFmode, 8); })
(define_insn “sse2_movsd” [(set (match_operand:V2DF 0 “nonimmediate_operand” “=x,x,m,x,x,o”) (vec_merge:V2DF (match_operand:V2DF 2 “nonimmediate_operand” " x,m,x,0,0,0") (match_operand:V2DF 1 “nonimmediate_operand” " 0,0,0,x,o,x") (const_int 1)))] “TARGET_SSE2” ;; APPLE LOCAL begin mainline 4736174 “@ movsd\t{%2, %0|%0, %2} movlpd\t{%2, %0|%0, %2} movlpd\t{%2, %0|%0, %2} shufpd\t{$2, %2, %0|%0, %2, 2} movhps\t{%H1, %0|%0, %H1} movhps\t{%1, %H0|%H0, %1}” ;; APPLE LOCAL end mainline 4736174 [(set_attr “type” “ssemov,ssemov,ssemov,sselog,ssemov,ssemov”) (set_attr “mode” “DF,V1DF,V1DF,V2DF,V1DF,V1DF”)])
(define_insn “*vec_dupv2df_sse3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_duplicate:V2DF (match_operand:DF 1 “nonimmediate_operand” “xm”)))] “TARGET_SSE3” “movddup\t{%1, %0|%0, %1}” [(set_attr “type” “sselog1”) (set_attr “mode” “DF”)])
(define_insn “*vec_dupv2df” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_duplicate:V2DF (match_operand:DF 1 “register_operand” “0”)))] “TARGET_SSE2” “unpcklpd\t%0, %0” [(set_attr “type” “sselog1”) (set_attr “mode” “V4SF”)])
(define_insn “*vec_concatv2df_sse3” [(set (match_operand:V2DF 0 “register_operand” “=x”) (vec_concat:V2DF (match_operand:DF 1 “nonimmediate_operand” “xm”) (match_dup 1)))] “TARGET_SSE3” “movddup\t{%1, %0|%0, %1}” [(set_attr “type” “sselog1”) (set_attr “mode” “DF”)])
(define_insn “*vec_concatv2df” [(set (match_operand:V2DF 0 “register_operand” “=Y,Y,Y,x,x”) (vec_concat:V2DF (match_operand:DF 1 “nonimmediate_operand” " 0,0,m,0,0") /* APPLE LOCAL mainline */ (match_operand:DF 2 “nonimmediate_or_0_operand” " Y,m,C,x,m")))] “TARGET_SSE” “@ unpcklpd\t{%2, %0|%0, %2} movhpd\t{%2, %0|%0, %2} movsd\t{%1, %0|%0, %1} movlhps\t{%2, %0|%0, %2} movhps\t{%2, %0|%0, %2}” [(set_attr “type” “sselog,ssemov,ssemov,ssemov,ssemov”) (set_attr “mode” “V2DF,V1DF,DF,V4SF,V2SF”)])
(define_expand “vec_setv2df” [(match_operand:V2DF 0 “register_operand” "") (match_operand:DF 1 “register_operand” "") (match_operand 2 “const_int_operand” "")] “TARGET_SSE” { ix86_expand_vector_set (false, operands[0], operands[1], INTVAL (operands[2])); DONE; })
(define_expand “vec_extractv2df” [(match_operand:DF 0 “register_operand” "") (match_operand:V2DF 1 “register_operand” "") (match_operand 2 “const_int_operand” "")] “TARGET_SSE” { ix86_expand_vector_extract (false, operands[0], operands[1], INTVAL (operands[2])); DONE; })
(define_expand “vec_initv2df” [(match_operand:V2DF 0 “register_operand” "") (match_operand 1 "" "")] “TARGET_SSE” { ix86_expand_vector_init (false, operands[0], operands[1]); DONE; })
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Parallel integral arithmetic ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(define_expand “neg2” [(set (match_operand:SSEMODEI 0 “register_operand” "") (minus:SSEMODEI (match_dup 2) (match_operand:SSEMODEI 1 “nonimmediate_operand” "")))] “TARGET_SSE2” “operands[2] = force_reg (mode, CONST0_RTX (mode));”)
(define_expand “add3” [(set (match_operand:SSEMODEI 0 “register_operand” "") (plus:SSEMODEI (match_operand:SSEMODEI 1 “nonimmediate_operand” "") (match_operand:SSEMODEI 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (PLUS, mode, operands);”)
(define_insn “*add3” [(set (match_operand:SSEMODEI 0 “register_operand” “=x”) (plus:SSEMODEI (match_operand:SSEMODEI 1 “nonimmediate_operand” “%0”) (match_operand:SSEMODEI 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (PLUS, mode, operands)” “padd\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_insn “sse2_ssadd3” [(set (match_operand:SSEMODE12 0 “register_operand” “=x”) (ss_plus:SSEMODE12 (match_operand:SSEMODE12 1 “nonimmediate_operand” “%0”) (match_operand:SSEMODE12 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (SS_PLUS, mode, operands)” “padds\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_insn “sse2_usadd3” [(set (match_operand:SSEMODE12 0 “register_operand” “=x”) (us_plus:SSEMODE12 (match_operand:SSEMODE12 1 “nonimmediate_operand” “%0”) (match_operand:SSEMODE12 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (US_PLUS, mode, operands)” “paddus\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_expand “sub3” [(set (match_operand:SSEMODEI 0 “register_operand” "") (minus:SSEMODEI (match_operand:SSEMODEI 1 “register_operand” "") (match_operand:SSEMODEI 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (MINUS, mode, operands);”)
(define_insn “*sub3” [(set (match_operand:SSEMODEI 0 “register_operand” “=x”) (minus:SSEMODEI (match_operand:SSEMODEI 1 “register_operand” “0”) (match_operand:SSEMODEI 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2” “psub\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_insn “sse2_sssub3” [(set (match_operand:SSEMODE12 0 “register_operand” “=x”) (ss_minus:SSEMODE12 (match_operand:SSEMODE12 1 “register_operand” “0”) (match_operand:SSEMODE12 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2” “psubs\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_insn “sse2_ussub3” [(set (match_operand:SSEMODE12 0 “register_operand” “=x”) (us_minus:SSEMODE12 (match_operand:SSEMODE12 1 “register_operand” “0”) (match_operand:SSEMODE12 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2” “psubus\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_expand “mulv8hi3” [(set (match_operand:V8HI 0 “register_operand” "") (mult:V8HI (match_operand:V8HI 1 “nonimmediate_operand” "") (match_operand:V8HI 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (MULT, V8HImode, operands);”)
(define_insn “*mulv8hi3” [(set (match_operand:V8HI 0 “register_operand” “=x”) (mult:V8HI (match_operand:V8HI 1 “nonimmediate_operand” “%0”) (match_operand:V8HI 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (MULT, V8HImode, operands)” “pmullw\t{%2, %0|%0, %2}” [(set_attr “type” “sseimul”) (set_attr “mode” “TI”)])
(define_insn “sse2_smulv8hi3_highpart” [(set (match_operand:V8HI 0 “register_operand” “=x”) (truncate:V8HI (lshiftrt:V8SI (mult:V8SI (sign_extend:V8SI (match_operand:V8HI 1 “nonimmediate_operand” “%0”)) (sign_extend:V8SI (match_operand:V8HI 2 “nonimmediate_operand” “xm”))) (const_int 16))))] “TARGET_SSE2 && ix86_binary_operator_ok (MULT, V8HImode, operands)” “pmulhw\t{%2, %0|%0, %2}” [(set_attr “type” “sseimul”) (set_attr “mode” “TI”)])
(define_insn “sse2_umulv8hi3_highpart” [(set (match_operand:V8HI 0 “register_operand” “=x”) (truncate:V8HI (lshiftrt:V8SI (mult:V8SI (zero_extend:V8SI (match_operand:V8HI 1 “nonimmediate_operand” “%0”)) (zero_extend:V8SI (match_operand:V8HI 2 “nonimmediate_operand” “xm”))) (const_int 16))))] “TARGET_SSE2 && ix86_binary_operator_ok (MULT, V8HImode, operands)” “pmulhuw\t{%2, %0|%0, %2}” [(set_attr “type” “sseimul”) (set_attr “mode” “TI”)])
(define_insn “sse2_umulv2siv2di3” [(set (match_operand:V2DI 0 “register_operand” “=x”) (mult:V2DI (zero_extend:V2DI (vec_select:V2SI (match_operand:V4SI 1 “nonimmediate_operand” “%0”) (parallel [(const_int 0) (const_int 2)]))) (zero_extend:V2DI (vec_select:V2SI (match_operand:V4SI 2 “nonimmediate_operand” “xm”) (parallel [(const_int 0) (const_int 2)])))))] “TARGET_SSE2 && ix86_binary_operator_ok (MULT, V8HImode, operands)” “pmuludq\t{%2, %0|%0, %2}” [(set_attr “type” “sseimul”) (set_attr “mode” “TI”)])
(define_insn “sse2_pmaddwd” [(set (match_operand:V4SI 0 “register_operand” “=x”) (plus:V4SI (mult:V4SI (sign_extend:V4SI (vec_select:V4HI (match_operand:V8HI 1 “nonimmediate_operand” “%0”) (parallel [(const_int 0) (const_int 2) (const_int 4) (const_int 6)]))) (sign_extend:V4SI (vec_select:V4HI (match_operand:V8HI 2 “nonimmediate_operand” “xm”) (parallel [(const_int 0) (const_int 2) (const_int 4) (const_int 6)])))) (mult:V4SI (sign_extend:V4SI (vec_select:V4HI (match_dup 1) (parallel [(const_int 1) (const_int 3) (const_int 5) (const_int 7)]))) (sign_extend:V4SI (vec_select:V4HI (match_dup 2) (parallel [(const_int 1) (const_int 3) (const_int 5) (const_int 7)]))))))] “TARGET_SSE2” “pmaddwd\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_insn “ashr3” [(set (match_operand:SSEMODE24 0 “register_operand” “=x”) (ashiftrt:SSEMODE24 (match_operand:SSEMODE24 1 “register_operand” “0”) (match_operand:SI 2 “nonmemory_operand” “xi”)))] “TARGET_SSE2” “psra\t{%2, %0|%0, %2}” [(set_attr “type” “sseishft”) (set_attr “mode” “TI”)])
(define_insn “lshr3” [(set (match_operand:SSEMODE248 0 “register_operand” “=x”) (lshiftrt:SSEMODE248 (match_operand:SSEMODE248 1 “register_operand” “0”) (match_operand:SI 2 “nonmemory_operand” “xi”)))] “TARGET_SSE2” “psrl\t{%2, %0|%0, %2}” [(set_attr “type” “sseishft”) (set_attr “mode” “TI”)])
(define_insn “ashl3” [(set (match_operand:SSEMODE248 0 “register_operand” “=x”) (ashift:SSEMODE248 (match_operand:SSEMODE248 1 “register_operand” “0”) (match_operand:SI 2 “nonmemory_operand” “xi”)))] “TARGET_SSE2” “psll\t{%2, %0|%0, %2}” [(set_attr “type” “sseishft”) (set_attr “mode” “TI”)])
(define_insn “sse2_ashlti3” [(set (match_operand:TI 0 “register_operand” “=x”) (ashift:TI (match_operand:TI 1 “register_operand” “0”) (match_operand:SI 2 “const_0_to_255_mul_8_operand” “n”)))] “TARGET_SSE2” { operands[2] = GEN_INT (INTVAL (operands[2]) / 8); return “pslldq\t{%2, %0|%0, %2}”; } [(set_attr “type” “sseishft”) (set_attr “mode” “TI”)])
(define_insn “sse2_lshrti3” [(set (match_operand:TI 0 “register_operand” “=x”) (lshiftrt:TI (match_operand:TI 1 “register_operand” “0”) (match_operand:SI 2 “const_0_to_255_mul_8_operand” “n”)))] “TARGET_SSE2” { operands[2] = GEN_INT (INTVAL (operands[2]) / 8); return “psrldq\t{%2, %0|%0, %2}”; } [(set_attr “type” “sseishft”) (set_attr “mode” “TI”)])
(define_expand “umaxv16qi3” [(set (match_operand:V16QI 0 “register_operand” "") (umax:V16QI (match_operand:V16QI 1 “nonimmediate_operand” "") (match_operand:V16QI 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (UMAX, V16QImode, operands);”)
(define_insn “*umaxv16qi3” [(set (match_operand:V16QI 0 “register_operand” “=x”) (umax:V16QI (match_operand:V16QI 1 “nonimmediate_operand” “%0”) (match_operand:V16QI 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (UMAX, V16QImode, operands)” “pmaxub\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_expand “smaxv8hi3” [(set (match_operand:V8HI 0 “register_operand” "") (smax:V8HI (match_operand:V8HI 1 “nonimmediate_operand” "") (match_operand:V8HI 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (SMAX, V8HImode, operands);”)
(define_insn “*smaxv8hi3” [(set (match_operand:V8HI 0 “register_operand” “=x”) (smax:V8HI (match_operand:V8HI 1 “nonimmediate_operand” “%0”) (match_operand:V8HI 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (SMAX, V8HImode, operands)” “pmaxsw\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_expand “uminv16qi3” [(set (match_operand:V16QI 0 “register_operand” "") (umin:V16QI (match_operand:V16QI 1 “nonimmediate_operand” "") (match_operand:V16QI 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (UMAX, V16QImode, operands);”)
(define_insn “*uminv16qi3” [(set (match_operand:V16QI 0 “register_operand” “=x”) (umin:V16QI (match_operand:V16QI 1 “nonimmediate_operand” “%0”) (match_operand:V16QI 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (UMIN, V16QImode, operands)” “pminub\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_expand “sminv8hi3” [(set (match_operand:V8HI 0 “register_operand” "") (smin:V8HI (match_operand:V8HI 1 “nonimmediate_operand” "") (match_operand:V8HI 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (SMIN, V8HImode, operands);”)
(define_insn “*sminv8hi3” [(set (match_operand:V8HI 0 “register_operand” “=x”) (smin:V8HI (match_operand:V8HI 1 “nonimmediate_operand” “%0”) (match_operand:V8HI 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (SMIN, V8HImode, operands)” “pminsw\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Parallel integral comparisons ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(define_insn “sse2_eq3” [(set (match_operand:SSEMODE124 0 “register_operand” “=x”) (eq:SSEMODE124 (match_operand:SSEMODE124 1 “nonimmediate_operand” “%0”) (match_operand:SSEMODE124 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (EQ, mode, operands)” “pcmpeq\t{%2, %0|%0, %2}” [(set_attr “type” “ssecmp”) (set_attr “mode” “TI”)])
(define_insn “sse2_gt3” [(set (match_operand:SSEMODE124 0 “register_operand” “=x”) (gt:SSEMODE124 (match_operand:SSEMODE124 1 “register_operand” “0”) (match_operand:SSEMODE124 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2” “pcmpgt\t{%2, %0|%0, %2}” [(set_attr “type” “ssecmp”) (set_attr “mode” “TI”)])
;; APPLE LOCAL begin mainline April 14, 2005 Radar 4053179 (define_expand “vcond” [(set (match_operand:SSEMODE124 0 “register_operand” "") (if_then_else:SSEMODE124 (match_operator 3 "" [(match_operand:SSEMODE124 4 “nonimmediate_operand” "") (match_operand:SSEMODE124 5 “nonimmediate_operand” "")]) (match_operand:SSEMODE124 1 “general_operand” "") (match_operand:SSEMODE124 2 “general_operand” "")))] “TARGET_SSE2” { if (ix86_expand_int_vcond (operands, false)) DONE; else FAIL; })
(define_expand “vcondu” [(set (match_operand:SSEMODE12 0 “register_operand” "") (if_then_else:SSEMODE12 (match_operator 3 "" [(match_operand:SSEMODE12 4 “nonimmediate_operand” "") (match_operand:SSEMODE12 5 “nonimmediate_operand” "")]) (match_operand:SSEMODE12 1 “general_operand” "") (match_operand:SSEMODE12 2 “general_operand” "")))] “TARGET_SSE2” { if (ix86_expand_int_vcond (operands, true)) DONE; else FAIL; }) ;; APPLE LOCAL end mainline April 14, 2005 Radar 4053179 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Parallel integral logical operations ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(define_expand “one_cmpl2” [(set (match_operand:SSEMODEI 0 “register_operand” "") (xor:SSEMODEI (match_operand:SSEMODEI 1 “nonimmediate_operand” "") (match_dup 2)))] “TARGET_SSE2” { int i, n = GET_MODE_NUNITS (mode); rtvec v = rtvec_alloc (n);
for (i = 0; i < n; ++i) RTVEC_ELT (v, i) = constm1_rtx;
operands[2] = force_reg (mode, gen_rtx_CONST_VECTOR (mode, v)); })
(define_expand “and3” [(set (match_operand:SSEMODEI 0 “register_operand” "") (and:SSEMODEI (match_operand:SSEMODEI 1 “nonimmediate_operand” "") (match_operand:SSEMODEI 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (AND, mode, operands);”)
(define_insn “*and3” [(set (match_operand:SSEMODEI 0 “register_operand” “=x”) (and:SSEMODEI (match_operand:SSEMODEI 1 “nonimmediate_operand” “%0”) (match_operand:SSEMODEI 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (AND, mode, operands)” “pand\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_insn “sse2_nand3” [(set (match_operand:SSEMODEI 0 “register_operand” “=x”) (and:SSEMODEI (not:SSEMODEI (match_operand:SSEMODEI 1 “register_operand” “0”)) (match_operand:SSEMODEI 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2” “pandn\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_expand “ior3” [(set (match_operand:SSEMODEI 0 “register_operand” "") (ior:SSEMODEI (match_operand:SSEMODEI 1 “nonimmediate_operand” "") (match_operand:SSEMODEI 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (IOR, mode, operands);”)
(define_insn “*ior3” [(set (match_operand:SSEMODEI 0 “register_operand” “=x”) (ior:SSEMODEI (match_operand:SSEMODEI 1 “nonimmediate_operand” “%0”) (match_operand:SSEMODEI 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (IOR, mode, operands)” “por\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_expand “xor3” [(set (match_operand:SSEMODEI 0 “register_operand” "") (xor:SSEMODEI (match_operand:SSEMODEI 1 “nonimmediate_operand” "") (match_operand:SSEMODEI 2 “nonimmediate_operand” "")))] “TARGET_SSE2” “ix86_fixup_binary_operands_no_copy (XOR, mode, operands);”)
(define_insn “*xor3” [(set (match_operand:SSEMODEI 0 “register_operand” “=x”) (xor:SSEMODEI (match_operand:SSEMODEI 1 “nonimmediate_operand” “%0”) (match_operand:SSEMODEI 2 “nonimmediate_operand” “xm”)))] “TARGET_SSE2 && ix86_binary_operator_ok (XOR, mode, operands)” “pxor\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Parallel integral element swizzling ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(define_insn “sse2_packsswb” [(set (match_operand:V16QI 0 “register_operand” “=x”) (vec_concat:V16QI (ss_truncate:V8QI (match_operand:V8HI 1 “register_operand” “0”)) (ss_truncate:V8QI (match_operand:V8HI 2 “nonimmediate_operand” “xm”))))] “TARGET_SSE2” “packsswb\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_insn “sse2_packssdw” [(set (match_operand:V8HI 0 “register_operand” “=x”) (vec_concat:V8HI (ss_truncate:V4HI (match_operand:V4SI 1 “register_operand” “0”)) (ss_truncate:V4HI (match_operand:V4SI 2 “nonimmediate_operand” “xm”))))] “TARGET_SSE2” “packssdw\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_insn “sse2_packuswb” [(set (match_operand:V16QI 0 “register_operand” “=x”) (vec_concat:V16QI (us_truncate:V8QI (match_operand:V8HI 1 “register_operand” “0”)) (us_truncate:V8QI (match_operand:V8HI 2 “nonimmediate_operand” “xm”))))] “TARGET_SSE2” “packuswb\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_insn “sse2_punpckhbw” [(set (match_operand:V16QI 0 “register_operand” “=x”) (vec_select:V16QI (vec_concat:V32QI (match_operand:V16QI 1 “register_operand” “0”) (match_operand:V16QI 2 “nonimmediate_operand” “xm”)) (parallel [(const_int 8) (const_int 24) (const_int 9) (const_int 25) (const_int 10) (const_int 26) (const_int 11) (const_int 27) (const_int 12) (const_int 28) (const_int 13) (const_int 29) (const_int 14) (const_int 30) (const_int 15) (const_int 31)])))] “TARGET_SSE2” “punpckhbw\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_insn “sse2_punpcklbw” [(set (match_operand:V16QI 0 “register_operand” “=x”) (vec_select:V16QI (vec_concat:V32QI (match_operand:V16QI 1 “register_operand” “0”) (match_operand:V16QI 2 “nonimmediate_operand” “xm”)) (parallel [(const_int 0) (const_int 16) (const_int 1) (const_int 17) (const_int 2) (const_int 18) (const_int 3) (const_int 19) (const_int 4) (const_int 20) (const_int 5) (const_int 21) (const_int 6) (const_int 22) (const_int 7) (const_int 23)])))] “TARGET_SSE2” “punpcklbw\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_insn “sse2_punpckhwd” [(set (match_operand:V8HI 0 “register_operand” “=x”) (vec_select:V8HI (vec_concat:V16HI (match_operand:V8HI 1 “register_operand” “0”) (match_operand:V8HI 2 “nonimmediate_operand” “xm”)) (parallel [(const_int 4) (const_int 12) (const_int 5) (const_int 13) (const_int 6) (const_int 14) (const_int 7) (const_int 15)])))] “TARGET_SSE2” “punpckhwd\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_insn “sse2_punpcklwd” [(set (match_operand:V8HI 0 “register_operand” “=x”) (vec_select:V8HI (vec_concat:V16HI (match_operand:V8HI 1 “register_operand” “0”) (match_operand:V8HI 2 “nonimmediate_operand” “xm”)) (parallel [(const_int 0) (const_int 8) (const_int 1) (const_int 9) (const_int 2) (const_int 10) (const_int 3) (const_int 11)])))] “TARGET_SSE2” “punpcklwd\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_insn “sse2_punpckhdq” [(set (match_operand:V4SI 0 “register_operand” “=x”) (vec_select:V4SI (vec_concat:V8SI (match_operand:V4SI 1 “register_operand” “0”) (match_operand:V4SI 2 “nonimmediate_operand” “xm”)) (parallel [(const_int 2) (const_int 6) (const_int 3) (const_int 7)])))] “TARGET_SSE2” “punpckhdq\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_insn “sse2_punpckldq” [(set (match_operand:V4SI 0 “register_operand” “=x”) (vec_select:V4SI (vec_concat:V8SI (match_operand:V4SI 1 “register_operand” “0”) (match_operand:V4SI 2 “nonimmediate_operand” “xm”)) (parallel [(const_int 0) (const_int 4) (const_int 1) (const_int 5)])))] “TARGET_SSE2” “punpckldq\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_insn “sse2_punpckhqdq” [(set (match_operand:V2DI 0 “register_operand” “=x”) (vec_select:V2DI (vec_concat:V4DI (match_operand:V2DI 1 “register_operand” “0”) (match_operand:V2DI 2 “nonimmediate_operand” “xm”)) (parallel [(const_int 1) (const_int 3)])))] “TARGET_SSE2” “punpckhqdq\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_insn “sse2_punpcklqdq” [(set (match_operand:V2DI 0 “register_operand” “=x”) (vec_select:V2DI (vec_concat:V4DI (match_operand:V2DI 1 “register_operand” “0”) (match_operand:V2DI 2 “nonimmediate_operand” “xm”)) (parallel [(const_int 0) (const_int 2)])))] “TARGET_SSE2” “punpcklqdq\t{%2, %0|%0, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_expand “sse2_pinsrw” [(set (match_operand:V8HI 0 “register_operand” "") (vec_merge:V8HI (vec_duplicate:V8HI (match_operand:SI 2 “nonimmediate_operand” "")) (match_operand:V8HI 1 “register_operand” "") (match_operand:SI 3 “const_0_to_7_operand” "")))] “TARGET_SSE2” { operands[2] = gen_lowpart (HImode, operands[2]); operands[3] = GEN_INT ((1 << INTVAL (operands[3]))); })
(define_insn “*sse2_pinsrw” [(set (match_operand:V8HI 0 “register_operand” “=x”) (vec_merge:V8HI (vec_duplicate:V8HI (match_operand:HI 2 “nonimmediate_operand” “rm”)) (match_operand:V8HI 1 “register_operand” “0”) (match_operand:SI 3 “const_pow2_1_to_128_operand” “n”)))] “TARGET_SSE2” { operands[3] = GEN_INT (exact_log2 (INTVAL (operands[3]))); return “pinsrw\t{%3, %k2, %0|%0, %k2, %3}”; } [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_insn “sse2_pextrw” [(set (match_operand:SI 0 “register_operand” “=r”) (zero_extend:SI (vec_select:HI (match_operand:V8HI 1 “register_operand” “x”) (parallel [(match_operand:SI 2 “const_0_to_7_operand” “n”)]))))] “TARGET_SSE2” “pextrw\t{%2, %1, %0|%0, %1, %2}” [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_expand “sse2_pshufd” [(match_operand:V4SI 0 “register_operand” "") (match_operand:V4SI 1 “nonimmediate_operand” "") (match_operand:SI 2 “const_int_operand” "")] “TARGET_SSE2” { int mask = INTVAL (operands[2]); emit_insn (gen_sse2_pshufd_1 (operands[0], operands[1], GEN_INT ((mask >> 0) & 3), GEN_INT ((mask >> 2) & 3), GEN_INT ((mask >> 4) & 3), GEN_INT ((mask >> 6) & 3))); DONE; })
(define_insn “sse2_pshufd_1” [(set (match_operand:V4SI 0 “register_operand” “=x”) (vec_select:V4SI (match_operand:V4SI 1 “nonimmediate_operand” “xm”) (parallel [(match_operand 2 “const_0_to_3_operand” "") (match_operand 3 “const_0_to_3_operand” "") (match_operand 4 “const_0_to_3_operand” "") (match_operand 5 “const_0_to_3_operand” "")])))] “TARGET_SSE2” { int mask = 0; mask |= INTVAL (operands[2]) << 0; mask |= INTVAL (operands[3]) << 2; mask |= INTVAL (operands[4]) << 4; mask |= INTVAL (operands[5]) << 6; operands[2] = GEN_INT (mask);
return “pshufd\t{%2, %1, %0|%0, %1, %2}”; } [(set_attr “type” “sselog1”) (set_attr “mode” “TI”)])
(define_expand “sse2_pshuflw” [(match_operand:V8HI 0 “register_operand” "") (match_operand:V8HI 1 “nonimmediate_operand” "") (match_operand:SI 2 “const_int_operand” "")] “TARGET_SSE2” { int mask = INTVAL (operands[2]); emit_insn (gen_sse2_pshuflw_1 (operands[0], operands[1], GEN_INT ((mask >> 0) & 3), GEN_INT ((mask >> 2) & 3), GEN_INT ((mask >> 4) & 3), GEN_INT ((mask >> 6) & 3))); DONE; })
(define_insn “sse2_pshuflw_1” [(set (match_operand:V8HI 0 “register_operand” “=x”) (vec_select:V8HI (match_operand:V8HI 1 “nonimmediate_operand” “xm”) (parallel [(match_operand 2 “const_0_to_3_operand” "") (match_operand 3 “const_0_to_3_operand” "") (match_operand 4 “const_0_to_3_operand” "") (match_operand 5 “const_0_to_3_operand” "") (const_int 4) (const_int 5) (const_int 6) (const_int 7)])))] “TARGET_SSE2” { int mask = 0; mask |= INTVAL (operands[2]) << 0; mask |= INTVAL (operands[3]) << 2; mask |= INTVAL (operands[4]) << 4; mask |= INTVAL (operands[5]) << 6; operands[2] = GEN_INT (mask);
return “pshuflw\t{%2, %1, %0|%0, %1, %2}”; } [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_expand “sse2_pshufhw” [(match_operand:V8HI 0 “register_operand” "") (match_operand:V8HI 1 “nonimmediate_operand” "") (match_operand:SI 2 “const_int_operand” "")] “TARGET_SSE2” { int mask = INTVAL (operands[2]); emit_insn (gen_sse2_pshufhw_1 (operands[0], operands[1], GEN_INT (((mask >> 0) & 3) + 4), GEN_INT (((mask >> 2) & 3) + 4), GEN_INT (((mask >> 4) & 3) + 4), GEN_INT (((mask >> 6) & 3) + 4))); DONE; })
(define_insn “sse2_pshufhw_1” [(set (match_operand:V8HI 0 “register_operand” “=x”) (vec_select:V8HI (match_operand:V8HI 1 “nonimmediate_operand” “xm”) (parallel [(const_int 0) (const_int 1) (const_int 2) (const_int 3) (match_operand 2 “const_4_to_7_operand” "") (match_operand 3 “const_4_to_7_operand” "") (match_operand 4 “const_4_to_7_operand” "") (match_operand 5 “const_4_to_7_operand” "")])))] “TARGET_SSE2” { int mask = 0; mask |= (INTVAL (operands[2]) - 4) << 0; mask |= (INTVAL (operands[3]) - 4) << 2; mask |= (INTVAL (operands[4]) - 4) << 4; mask |= (INTVAL (operands[5]) - 4) << 6; operands[2] = GEN_INT (mask);
return “pshufhw\t{%2, %1, %0|%0, %1, %2}”; } [(set_attr “type” “sselog”) (set_attr “mode” “TI”)])
(define_expand “sse2_loadd” [(set (match_operand:V4SI 0 “register_operand” "") (vec_merge:V4SI (vec_duplicate:V4SI (match_operand:SI 1 “nonimmediate_operand” "")) (match_dup 2) (const_int 1)))] “TARGET_SSE” “operands[2] = CONST0_RTX (V4SImode);”)
(define_insn “sse2_loadld” [(set (match_operand:V4SI 0 “register_operand” “=Y,x,x”) (vec_merge:V4SI (vec_duplicate:V4SI (match_operand:SI 2 “nonimmediate_operand” “mr,m,x”)) /* APPLE LOCAL mainline */ (match_operand:V4SI 1 “nonimmediate_or_0_operand” " C,C,0") (const_int 1)))] “TARGET_SSE” “@ movd\t{%2, %0|%0, %2} movss\t{%2, %0|%0, %2} movss\t{%2, %0|%0, %2}” [(set_attr “type” “ssemov”) (set_attr “mode” “TI,V4SF,SF”)])
;; ??? The hardware supports more, but TARGET_INTER_UNIT_MOVES must ;; be taken into account, and movdi isn't fully populated even without. (define_insn_and_split “sse2_stored” ;; APPLE LOCAL begin radar 4412214, 4172200 [(set (match_operand:SI 0 “nonimmediate_operand” “=mxr”) ;; APPLE LOCAL end radar 4412214, 4172200 (vec_select:SI (match_operand:V4SI 1 “register_operand” “x”) (parallel [(const_int 0)])))] “TARGET_SSE” “#” “&& reload_completed” [(set (match_dup 0) (match_dup 1))] { operands[1] = gen_rtx_REG (SImode, REGNO (operands[1])); })
(define_expand “sse_storeq” [(set (match_operand:DI 0 “nonimmediate_operand” "") (vec_select:DI (match_operand:V2DI 1 “register_operand” "") (parallel [(const_int 0)])))] “TARGET_SSE” "")
;; ??? The hardware supports more, but TARGET_INTER_UNIT_MOVES must ;; be taken into account, and movdi isn't fully populated even without. (define_insn “*sse2_storeq” [(set (match_operand:DI 0 “nonimmediate_operand” “=mx”) (vec_select:DI (match_operand:V2DI 1 “register_operand” “x”) (parallel [(const_int 0)])))] “TARGET_SSE” “#”)
(define_split [(set (match_operand:DI 0 “nonimmediate_operand” "") (vec_select:DI (match_operand:V2DI 1 “register_operand” "") (parallel [(const_int 0)])))] “TARGET_SSE && reload_completed” [(set (match_dup 0) (match_dup 1))] { operands[1] = gen_rtx_REG (DImode, REGNO (operands[1])); })
(define_insn “*vec_dupv4si” [(set (match_operand:V4SI 0 “register_operand” “=Y,x”) (vec_duplicate:V4SI (match_operand:SI 1 “register_operand” " Y,0")))] “TARGET_SSE” “@ pshufd\t{$0, %1, %0|%0, %1, 0} shufps\t{$0, %0, %0|%0, %0, 0}” [(set_attr “type” “sselog1”) (set_attr “mode” “TI,V4SF”)])
(define_insn “*vec_dupv2di” [(set (match_operand:V2DI 0 “register_operand” “=Y,x”) (vec_duplicate:V2DI (match_operand:DI 1 “register_operand” " 0,0")))] “TARGET_SSE” “@ punpcklqdq\t%0, %0 movlhps\t%0, %0” [(set_attr “type” “sselog1,ssemov”) (set_attr “mode” “TI,V4SF”)])
;; ??? In theory we can match memory for the MMX alternative, but allowing ;; nonimmediate_operand for operand 2 and not allowing memory for the SSE ;; alternatives pretty much forces the MMX alternative to be chosen. (define_insn “*sse2_concatv2si” [(set (match_operand:V2SI 0 “register_operand” “=Y, Y,*y,*y”) (vec_concat:V2SI (match_operand:SI 1 “nonimmediate_operand” " 0,rm, 0,rm") (match_operand:SI 2 “reg_or_0_operand” " Y, C,*y, C")))] “TARGET_SSE2” “@ punpckldq\t{%2, %0|%0, %2} movd\t{%1, %0|%0, %1} punpckldq\t{%2, %0|%0, %2} movd\t{%1, %0|%0, %1}” [(set_attr “type” “sselog,ssemov,mmxcvt,mmxmov”) (set_attr “mode” “TI,TI,DI,DI”)])
(define_insn “*sse1_concatv2si” [(set (match_operand:V2SI 0 “register_operand” “=x,x,*y,*y”) (vec_concat:V2SI (match_operand:SI 1 “nonimmediate_operand” " 0,m, 0,*rm") (match_operand:SI 2 “reg_or_0_operand” " x,C,*y,C")))] “TARGET_SSE” “@ unpcklps\t{%2, %0|%0, %2} movss\t{%1, %0|%0, %1} punpckldq\t{%2, %0|%0, %2} movd\t{%1, %0|%0, %1}” [(set_attr “type” “sselog,ssemov,mmxcvt,mmxmov”) (set_attr “mode” “V4SF,V4SF,DI,DI”)])
(define_insn “*vec_concatv4si_1” [(set (match_operand:V4SI 0 “register_operand” “=Y,x,x”) (vec_concat:V4SI (match_operand:V2SI 1 “register_operand” " 0,0,0") (match_operand:V2SI 2 “nonimmediate_operand” " Y,x,m")))] “TARGET_SSE” “@ punpcklqdq\t{%2, %0|%0, %2} movlhps\t{%2, %0|%0, %2} movhps\t{%2, %0|%0, %2}” [(set_attr “type” “sselog,ssemov,ssemov”) (set_attr “mode” “TI,V4SF,V2SF”)])
(define_insn “*vec_concatv2di” [(set (match_operand:V2DI 0 “register_operand” “=Y,?Y,Y,x,x,x”) (vec_concat:V2DI (match_operand:DI 1 “nonimmediate_operand” " m,y,0,0,0,m") / APPLE LOCAL mainline */ (match_operand:DI 2 “nonimmediate_or_0_operand” " C, C,Y,x,m,0")))] “TARGET_SSE” “@ movq\t{%1, %0|%0, %1} movq2dq\t{%1, %0|%0, %1} punpcklqdq\t{%2, %0|%0, %2} movlhps\t{%2, %0|%0, %2} movhps\t{%2, %0|%0, %2} movlps\t{%1, %0|%0, %1}” [(set_attr “type” “ssemov,ssemov,sselog,ssemov,ssemov,ssemov”) (set_attr “mode” “TI,TI,TI,V4SF,V2SF,V2SF”)])
(define_expand “vec_setv2di” [(match_operand:V2DI 0 “register_operand” "") (match_operand:DI 1 “register_operand” "") (match_operand 2 “const_int_operand” "")] “TARGET_SSE” { ix86_expand_vector_set (false, operands[0], operands[1], INTVAL (operands[2])); DONE; })
(define_expand “vec_extractv2di” [(match_operand:DI 0 “register_operand” "") (match_operand:V2DI 1 “register_operand” "") (match_operand 2 “const_int_operand” "")] “TARGET_SSE” { ix86_expand_vector_extract (false, operands[0], operands[1], INTVAL (operands[2])); DONE; })
(define_expand “vec_initv2di” [(match_operand:V2DI 0 “register_operand” "") (match_operand 1 "" "")] “TARGET_SSE” { ix86_expand_vector_init (false, operands[0], operands[1]); DONE; })
(define_expand “vec_setv4si” [(match_operand:V4SI 0 “register_operand” "") (match_operand:SI 1 “register_operand” "") (match_operand 2 “const_int_operand” "")] “TARGET_SSE” { ix86_expand_vector_set (false, operands[0], operands[1], INTVAL (operands[2])); DONE; })
(define_expand “vec_extractv4si” [(match_operand:SI 0 “register_operand” "") (match_operand:V4SI 1 “register_operand” "") (match_operand 2 “const_int_operand” "")] “TARGET_SSE” { ix86_expand_vector_extract (false, operands[0], operands[1], INTVAL (operands[2])); DONE; })
(define_expand “vec_initv4si” [(match_operand:V4SI 0 “register_operand” "") (match_operand 1 "" "")] “TARGET_SSE” { ix86_expand_vector_init (false, operands[0], operands[1]); DONE; })
(define_expand “vec_setv8hi” [(match_operand:V8HI 0 “register_operand” "") (match_operand:HI 1 “register_operand” "") (match_operand 2 “const_int_operand” "")] “TARGET_SSE” { ix86_expand_vector_set (false, operands[0], operands[1], INTVAL (operands[2])); DONE; })
(define_expand “vec_extractv8hi” [(match_operand:HI 0 “register_operand” "") (match_operand:V8HI 1 “register_operand” "") (match_operand 2 “const_int_operand” "")] “TARGET_SSE” { ix86_expand_vector_extract (false, operands[0], operands[1], INTVAL (operands[2])); DONE; })
(define_expand “vec_initv8hi” [(match_operand:V8HI 0 “register_operand” "") (match_operand 1 "" "")] “TARGET_SSE” { ix86_expand_vector_init (false, operands[0], operands[1]); DONE; })
(define_expand “vec_setv16qi” [(match_operand:V16QI 0 “register_operand” "") (match_operand:QI 1 “register_operand” "") (match_operand 2 “const_int_operand” "")] “TARGET_SSE” { ix86_expand_vector_set (false, operands[0], operands[1], INTVAL (operands[2])); DONE; })
(define_expand “vec_extractv16qi” [(match_operand:QI 0 “register_operand” "") (match_operand:V16QI 1 “register_operand” "") (match_operand 2 “const_int_operand” "")] “TARGET_SSE” { ix86_expand_vector_extract (false, operands[0], operands[1], INTVAL (operands[2])); DONE; })
(define_expand “vec_initv16qi” [(match_operand:V16QI 0 “register_operand” "") (match_operand 1 "" "")] “TARGET_SSE” { ix86_expand_vector_init (false, operands[0], operands[1]); DONE; })
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Miscellaneous ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(define_insn “sse2_uavgv16qi3” [(set (match_operand:V16QI 0 “register_operand” “=x”) (truncate:V16QI (lshiftrt:V16HI (plus:V16HI (plus:V16HI (zero_extend:V16HI (match_operand:V16QI 1 “nonimmediate_operand” “%0”)) (zero_extend:V16HI (match_operand:V16QI 2 “nonimmediate_operand” “xm”))) (const_vector:V16QI [(const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1)])) (const_int 1))))] “TARGET_SSE2 && ix86_binary_operator_ok (PLUS, V16QImode, operands)” “pavgb\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_insn “sse2_uavgv8hi3” [(set (match_operand:V8HI 0 “register_operand” “=x”) (truncate:V8HI (lshiftrt:V8SI (plus:V8SI (plus:V8SI (zero_extend:V8SI (match_operand:V8HI 1 “nonimmediate_operand” “%0”)) (zero_extend:V8SI (match_operand:V8HI 2 “nonimmediate_operand” “xm”))) (const_vector:V8HI [(const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1)])) (const_int 1))))] “TARGET_SSE2 && ix86_binary_operator_ok (PLUS, V8HImode, operands)” “pavgw\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
;; The correct representation for this is absolutely enormous, and ;; surely not generally useful. (define_insn “sse2_psadbw” [(set (match_operand:V2DI 0 “register_operand” “=x”) (unspec:V2DI [(match_operand:V16QI 1 “register_operand” “0”) (match_operand:V16QI 2 “nonimmediate_operand” “xm”)] UNSPEC_PSADBW))] “TARGET_SSE2” “psadbw\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_insn “sse_movmskps” [(set (match_operand:SI 0 “register_operand” “=r”) (unspec:SI [(match_operand:V4SF 1 “register_operand” “x”)] UNSPEC_MOVMSK))] “TARGET_SSE” “movmskps\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “V4SF”)])
(define_insn “sse2_movmskpd” [(set (match_operand:SI 0 “register_operand” “=r”) (unspec:SI [(match_operand:V2DF 1 “register_operand” “x”)] UNSPEC_MOVMSK))] “TARGET_SSE2” “movmskpd\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “V2DF”)])
(define_insn “sse2_pmovmskb” [(set (match_operand:SI 0 “register_operand” “=r”) (unspec:SI [(match_operand:V16QI 1 “register_operand” “x”)] UNSPEC_MOVMSK))] “TARGET_SSE2” “pmovmskb\t{%1, %0|%0, %1}” [(set_attr “type” “ssecvt”) (set_attr “mode” “V2DF”)])
(define_expand “sse2_maskmovdqu” [(set (match_operand:V16QI 0 “memory_operand” "") (unspec:V16QI [(match_operand:V16QI 1 “register_operand” “x”) (match_operand:V16QI 2 “register_operand” “x”) (match_dup 0)] UNSPEC_MASKMOV))] “TARGET_SSE2” "")
(define_insn “*sse2_maskmovdqu” [(set (mem:V16QI (match_operand:SI 0 “register_operand” “D”)) (unspec:V16QI [(match_operand:V16QI 1 “register_operand” “x”) (match_operand:V16QI 2 “register_operand” “x”) (mem:V16QI (match_dup 0))] UNSPEC_MASKMOV))] “TARGET_SSE2 && !TARGET_64BIT” ;; @@@ check ordering of operands in intel/nonintel syntax “maskmovdqu\t{%2, %1|%1, %2}” [(set_attr “type” “ssecvt”) (set_attr “mode” “TI”)])
(define_insn “*sse2_maskmovdqu_rex64” [(set (mem:V16QI (match_operand:DI 0 “register_operand” “D”)) (unspec:V16QI [(match_operand:V16QI 1 “register_operand” “x”) (match_operand:V16QI 2 “register_operand” “x”) (mem:V16QI (match_dup 0))] UNSPEC_MASKMOV))] “TARGET_SSE2 && TARGET_64BIT” ;; @@@ check ordering of operands in intel/nonintel syntax “maskmovdqu\t{%2, %1|%1, %2}” [(set_attr “type” “ssecvt”) (set_attr “mode” “TI”)])
(define_insn “sse_ldmxcsr” [(unspec_volatile [(match_operand:SI 0 “memory_operand” “m”)] UNSPECV_LDMXCSR)] “TARGET_SSE” “ldmxcsr\t%0” [(set_attr “type” “sse”) (set_attr “memory” “load”)])
(define_insn “sse_stmxcsr” [(set (match_operand:SI 0 “memory_operand” “=m”) (unspec_volatile:SI [(const_int 0)] UNSPECV_STMXCSR))] “TARGET_SSE” “stmxcsr\t%0” [(set_attr “type” “sse”) (set_attr “memory” “store”)])
(define_expand “sse_sfence” [(set (match_dup 0) (unspec:BLK [(match_dup 0)] UNSPEC_SFENCE))] “TARGET_SSE || TARGET_3DNOW_A” { operands[0] = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode)); MEM_VOLATILE_P (operands[0]) = 1; })
(define_insn “*sse_sfence” [(set (match_operand:BLK 0 "" "") (unspec:BLK [(match_dup 0)] UNSPEC_SFENCE))] “TARGET_SSE || TARGET_3DNOW_A” “sfence” [(set_attr “type” “sse”) (set_attr “memory” “unknown”)])
(define_insn “sse2_clflush” [(unspec_volatile [(match_operand 0 “address_operand” “p”)] UNSPECV_CLFLUSH)] “TARGET_SSE2” “clflush\t%a0” [(set_attr “type” “sse”) (set_attr “memory” “unknown”)])
(define_expand “sse2_mfence” [(set (match_dup 0) (unspec:BLK [(match_dup 0)] UNSPEC_MFENCE))] “TARGET_SSE2” { operands[0] = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode)); MEM_VOLATILE_P (operands[0]) = 1; })
(define_insn “*sse2_mfence” [(set (match_operand:BLK 0 "" "") (unspec:BLK [(match_dup 0)] UNSPEC_MFENCE))] “TARGET_SSE2” “mfence” [(set_attr “type” “sse”) (set_attr “memory” “unknown”)])
(define_expand “sse2_lfence” [(set (match_dup 0) (unspec:BLK [(match_dup 0)] UNSPEC_LFENCE))] “TARGET_SSE2” { operands[0] = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode)); MEM_VOLATILE_P (operands[0]) = 1; })
(define_insn “*sse2_lfence” [(set (match_operand:BLK 0 "" "") (unspec:BLK [(match_dup 0)] UNSPEC_LFENCE))] “TARGET_SSE2” “lfence” [(set_attr “type” “sse”) (set_attr “memory” “unknown”)])
(define_insn “sse3_mwait” [(unspec_volatile [(match_operand:SI 0 “register_operand” “a”) (match_operand:SI 1 “register_operand” “c”)] UNSPECV_MWAIT)] “TARGET_SSE3” “mwait\t%0, %1” [(set_attr “length” “3”)])
(define_insn “sse3_monitor” [(unspec_volatile [(match_operand:SI 0 “register_operand” “a”) (match_operand:SI 1 “register_operand” “c”) (match_operand:SI 2 “register_operand” “d”)] UNSPECV_MONITOR)] “TARGET_SSE3” “monitor\t%0, %1, %2” [(set_attr “length” “3”)]) ; APPLE LOCAL begin ssse3 4424835 ;; SSSE3 (define_insn “ssse3_phaddwv8hi3” [(set (match_operand:V8HI 0 “register_operand” “=x”) (vec_concat:V8HI (vec_concat:V4HI (vec_concat:V2HI (plus:HI (vec_select:HI (match_operand:V8HI 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 1) (parallel [(const_int 1)]))) (plus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 2)])) (vec_select:HI (match_dup 1) (parallel [(const_int 3)])))) (vec_concat:V2HI (plus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 4)])) (vec_select:HI (match_dup 1) (parallel [(const_int 5)]))) (plus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 6)])) (vec_select:HI (match_dup 1) (parallel [(const_int 7)]))))) (vec_concat:V4HI (vec_concat:V2HI (plus:HI (vec_select:HI (match_operand:V8HI 2 “nonimmediate_operand” “xm”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 2) (parallel [(const_int 1)]))) (plus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 2)])) (vec_select:HI (match_dup 2) (parallel [(const_int 3)])))) (vec_concat:V2HI (plus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 4)])) (vec_select:HI (match_dup 2) (parallel [(const_int 5)]))) (plus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 6)])) (vec_select:HI (match_dup 2) (parallel [(const_int 7)])))))))] “TARGET_SSSE3” “phaddw\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_insn “ssse3_phaddwv4hi3” [(set (match_operand:V4HI 0 “register_operand” “=y”) (vec_concat:V4HI (vec_concat:V2HI (plus:HI (vec_select:HI (match_operand:V4HI 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 1) (parallel [(const_int 1)]))) (plus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 2)])) (vec_select:HI (match_dup 1) (parallel [(const_int 3)])))) (vec_concat:V2HI (plus:HI (vec_select:HI (match_operand:V4HI 2 “nonimmediate_operand” “ym”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 2) (parallel [(const_int 1)]))) (plus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 2)])) (vec_select:HI (match_dup 2) (parallel [(const_int 3)]))))))] “TARGET_SSSE3” “phaddw\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “DI”)])
(define_insn “ssse3_phadddv4si3” [(set (match_operand:V4SI 0 “register_operand” “=x”) (vec_concat:V4SI (vec_concat:V2SI (plus:SI (vec_select:SI (match_operand:V4SI 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:SI (match_dup 1) (parallel [(const_int 1)]))) (plus:SI (vec_select:SI (match_dup 1) (parallel [(const_int 2)])) (vec_select:SI (match_dup 1) (parallel [(const_int 3)])))) (vec_concat:V2SI (plus:SI (vec_select:SI (match_operand:V4SI 2 “nonimmediate_operand” “xm”) (parallel [(const_int 0)])) (vec_select:SI (match_dup 2) (parallel [(const_int 1)]))) (plus:SI (vec_select:SI (match_dup 2) (parallel [(const_int 2)])) (vec_select:SI (match_dup 2) (parallel [(const_int 3)]))))))] “TARGET_SSSE3” “phaddd\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_insn “ssse3_phadddv2si3” [(set (match_operand:V2SI 0 “register_operand” “=y”) (vec_concat:V2SI (plus:SI (vec_select:SI (match_operand:V2SI 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:SI (match_dup 1) (parallel [(const_int 1)]))) (plus:SI (vec_select:SI (match_operand:V2SI 2 “nonimmediate_operand” “ym”) (parallel [(const_int 0)])) (vec_select:SI (match_dup 2) (parallel [(const_int 1)])))))] “TARGET_SSSE3” “phaddd\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “DI”)])
(define_insn “ssse3_phaddswv8hi3” [(set (match_operand:V8HI 0 “register_operand” “=x”) (vec_concat:V8HI (vec_concat:V4HI (vec_concat:V2HI (ss_plus:HI (vec_select:HI (match_operand:V8HI 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 1) (parallel [(const_int 1)]))) (ss_plus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 2)])) (vec_select:HI (match_dup 1) (parallel [(const_int 3)])))) (vec_concat:V2HI (ss_plus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 4)])) (vec_select:HI (match_dup 1) (parallel [(const_int 5)]))) (ss_plus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 6)])) (vec_select:HI (match_dup 1) (parallel [(const_int 7)]))))) (vec_concat:V4HI (vec_concat:V2HI (ss_plus:HI (vec_select:HI (match_operand:V8HI 2 “nonimmediate_operand” “xm”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 2) (parallel [(const_int 1)]))) (ss_plus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 2)])) (vec_select:HI (match_dup 2) (parallel [(const_int 3)])))) (vec_concat:V2HI (ss_plus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 4)])) (vec_select:HI (match_dup 2) (parallel [(const_int 5)]))) (ss_plus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 6)])) (vec_select:HI (match_dup 2) (parallel [(const_int 7)])))))))] “TARGET_SSSE3” “phaddsw\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_insn “ssse3_phaddswv4hi3” [(set (match_operand:V4HI 0 “register_operand” “=y”) (vec_concat:V4HI (vec_concat:V2HI (ss_plus:HI (vec_select:HI (match_operand:V4HI 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 1) (parallel [(const_int 1)]))) (ss_plus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 2)])) (vec_select:HI (match_dup 1) (parallel [(const_int 3)])))) (vec_concat:V2HI (ss_plus:HI (vec_select:HI (match_operand:V4HI 2 “nonimmediate_operand” “ym”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 2) (parallel [(const_int 1)]))) (ss_plus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 2)])) (vec_select:HI (match_dup 2) (parallel [(const_int 3)]))))))] “TARGET_SSSE3” “phaddsw\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “DI”)])
(define_insn “ssse3_phsubwv8hi3” [(set (match_operand:V8HI 0 “register_operand” “=x”) (vec_concat:V8HI (vec_concat:V4HI (vec_concat:V2HI (minus:HI (vec_select:HI (match_operand:V8HI 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 1) (parallel [(const_int 1)]))) (minus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 2)])) (vec_select:HI (match_dup 1) (parallel [(const_int 3)])))) (vec_concat:V2HI (minus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 4)])) (vec_select:HI (match_dup 1) (parallel [(const_int 5)]))) (minus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 6)])) (vec_select:HI (match_dup 1) (parallel [(const_int 7)]))))) (vec_concat:V4HI (vec_concat:V2HI (minus:HI (vec_select:HI (match_operand:V8HI 2 “nonimmediate_operand” “xm”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 2) (parallel [(const_int 1)]))) (minus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 2)])) (vec_select:HI (match_dup 2) (parallel [(const_int 3)])))) (vec_concat:V2HI (minus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 4)])) (vec_select:HI (match_dup 2) (parallel [(const_int 5)]))) (minus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 6)])) (vec_select:HI (match_dup 2) (parallel [(const_int 7)])))))))] “TARGET_SSSE3” “phsubw\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_insn “ssse3_phsubwv4hi3” [(set (match_operand:V4HI 0 “register_operand” “=y”) (vec_concat:V4HI (vec_concat:V2HI (minus:HI (vec_select:HI (match_operand:V4HI 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 1) (parallel [(const_int 1)]))) (minus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 2)])) (vec_select:HI (match_dup 1) (parallel [(const_int 3)])))) (vec_concat:V2HI (minus:HI (vec_select:HI (match_operand:V4HI 2 “nonimmediate_operand” “ym”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 2) (parallel [(const_int 1)]))) (minus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 2)])) (vec_select:HI (match_dup 2) (parallel [(const_int 3)]))))))] “TARGET_SSSE3” “phsubw\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “DI”)])
(define_insn “ssse3_phsubdv4si3” [(set (match_operand:V4SI 0 “register_operand” “=x”) (vec_concat:V4SI (vec_concat:V2SI (minus:SI (vec_select:SI (match_operand:V4SI 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:SI (match_dup 1) (parallel [(const_int 1)]))) (minus:SI (vec_select:SI (match_dup 1) (parallel [(const_int 2)])) (vec_select:SI (match_dup 1) (parallel [(const_int 3)])))) (vec_concat:V2SI (minus:SI (vec_select:SI (match_operand:V4SI 2 “nonimmediate_operand” “xm”) (parallel [(const_int 0)])) (vec_select:SI (match_dup 2) (parallel [(const_int 1)]))) (minus:SI (vec_select:SI (match_dup 2) (parallel [(const_int 2)])) (vec_select:SI (match_dup 2) (parallel [(const_int 3)]))))))] “TARGET_SSSE3” “phsubd\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_insn “ssse3_phsubdv2si3” [(set (match_operand:V2SI 0 “register_operand” “=y”) (vec_concat:V2SI (minus:SI (vec_select:SI (match_operand:V2SI 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:SI (match_dup 1) (parallel [(const_int 1)]))) (minus:SI (vec_select:SI (match_operand:V2SI 2 “nonimmediate_operand” “ym”) (parallel [(const_int 0)])) (vec_select:SI (match_dup 2) (parallel [(const_int 1)])))))] “TARGET_SSSE3” “phsubd\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “DI”)])
(define_insn “ssse3_phsubswv8hi3” [(set (match_operand:V8HI 0 “register_operand” “=x”) (vec_concat:V8HI (vec_concat:V4HI (vec_concat:V2HI (ss_minus:HI (vec_select:HI (match_operand:V8HI 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 1) (parallel [(const_int 1)]))) (ss_minus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 2)])) (vec_select:HI (match_dup 1) (parallel [(const_int 3)])))) (vec_concat:V2HI (ss_minus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 4)])) (vec_select:HI (match_dup 1) (parallel [(const_int 5)]))) (ss_minus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 6)])) (vec_select:HI (match_dup 1) (parallel [(const_int 7)]))))) (vec_concat:V4HI (vec_concat:V2HI (ss_minus:HI (vec_select:HI (match_operand:V8HI 2 “nonimmediate_operand” “xm”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 2) (parallel [(const_int 1)]))) (ss_minus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 2)])) (vec_select:HI (match_dup 2) (parallel [(const_int 3)])))) (vec_concat:V2HI (ss_minus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 4)])) (vec_select:HI (match_dup 2) (parallel [(const_int 5)]))) (ss_minus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 6)])) (vec_select:HI (match_dup 2) (parallel [(const_int 7)])))))))] “TARGET_SSSE3” “phsubsw\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_insn “ssse3_phsubswv4hi3” [(set (match_operand:V4HI 0 “register_operand” “=y”) (vec_concat:V4HI (vec_concat:V2HI (ss_minus:HI (vec_select:HI (match_operand:V4HI 1 “register_operand” “0”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 1) (parallel [(const_int 1)]))) (ss_minus:HI (vec_select:HI (match_dup 1) (parallel [(const_int 2)])) (vec_select:HI (match_dup 1) (parallel [(const_int 3)])))) (vec_concat:V2HI (ss_minus:HI (vec_select:HI (match_operand:V4HI 2 “nonimmediate_operand” “ym”) (parallel [(const_int 0)])) (vec_select:HI (match_dup 2) (parallel [(const_int 1)]))) (ss_minus:HI (vec_select:HI (match_dup 2) (parallel [(const_int 2)])) (vec_select:HI (match_dup 2) (parallel [(const_int 3)]))))))] “TARGET_SSSE3” “phsubsw\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “DI”)])
(define_insn “ssse3_pmaddubswv8hi3” [(set (match_operand:V8HI 0 “register_operand” “=x”) (ss_plus:V8HI (mult:V8HI (zero_extend:V8HI (vec_select:V4QI (match_operand:V16QI 1 “nonimmediate_operand” “%0”) (parallel [(const_int 0) (const_int 2) (const_int 4) (const_int 6) (const_int 8) (const_int 10) (const_int 12) (const_int 14)]))) (sign_extend:V8HI (vec_select:V8QI (match_operand:V16QI 2 “nonimmediate_operand” “xm”) (parallel [(const_int 0) (const_int 2) (const_int 4) (const_int 6) (const_int 8) (const_int 10) (const_int 12) (const_int 14)])))) (mult:V8HI (zero_extend:V8HI (vec_select:V16QI (match_dup 1) (parallel [(const_int 1) (const_int 3) (const_int 5) (const_int 7) (const_int 9) (const_int 11) (const_int 13) (const_int 15)]))) (sign_extend:V8HI (vec_select:V16QI (match_dup 2) (parallel [(const_int 1) (const_int 3) (const_int 5) (const_int 7) (const_int 9) (const_int 11) (const_int 13) (const_int 15)]))))))] “TARGET_SSSE3” “pmaddubsw\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “TI”)])
(define_insn “ssse3_pmaddubswv4hi3” [(set (match_operand:V4HI 0 “register_operand” “=y”) (ss_plus:V4HI (mult:V4HI (zero_extend:V4HI (vec_select:V4QI (match_operand:V8QI 1 “nonimmediate_operand” “%0”) (parallel [(const_int 0) (const_int 2) (const_int 4) (const_int 6)]))) (sign_extend:V4HI (vec_select:V4QI (match_operand:V8QI 2 “nonimmediate_operand” “ym”) (parallel [(const_int 0) (const_int 2) (const_int 4) (const_int 6)])))) (mult:V4HI (zero_extend:V4HI (vec_select:V8QI (match_dup 1) (parallel [(const_int 1) (const_int 3) (const_int 5) (const_int 7)]))) (sign_extend:V4HI (vec_select:V8QI (match_dup 2) (parallel [(const_int 1) (const_int 3) (const_int 5) (const_int 7)]))))))] “TARGET_SSSE3” “pmaddubsw\t{%2, %0|%0, %2}” [(set_attr “type” “sseiadd”) (set_attr “mode” “DI”)])
(define_insn “ssse3_pmulhrswv8hi3” [(set (match_operand:V8HI 0 “register_operand” “=x”) (truncate:V8HI (lshiftrt:V8SI (plus:V8SI (lshiftrt:V8SI (mult:V8SI (sign_extend:V8SI (match_operand:V8HI 1 “nonimmediate_operand” “%0”)) (sign_extend:V8SI (match_operand:V8HI 2 “nonimmediate_operand” “xm”))) (const_int 14)) (const_vector:V8HI [(const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1) (const_int 1)])) (const_int 1))))] “TARGET_SSSE3 && ix86_binary_operator_ok (MULT, V8HImode, operands)” “pmulhrsw\t{%2, %0|%0, %2}” [(set_attr “type” “sseimul”) (set_attr “mode” “TI”)])
(define_insn “ssse3_pmulhrswv4hi3” [(set (match_operand:V4HI 0 “register_operand” “=y”) (truncate:V4HI (lshiftrt:V4SI (plus:V4SI (lshiftrt:V4SI (mult:V4SI (sign_extend:V4SI (match_operand:V4HI 1 “nonimmediate_operand” “%0”)) (sign_extend:V4SI (match_operand:V4HI 2 “nonimmediate_operand” “ym”))) (const_int 14)) (const_vector:V4HI [(const_int 1) (const_int 1) (const_int 1) (const_int 1)])) (const_int 1))))] “TARGET_SSSE3 && ix86_binary_operator_ok (MULT, V4HImode, operands)” “pmulhrsw\t{%2, %0|%0, %2}” [(set_attr “type” “sseimul”) (set_attr “mode” “DI”)])
(define_insn “ssse3_pshufbv16qi3” [(set (match_operand:V16QI 0 “register_operand” “=x”) (unspec:V16QI [(match_operand:V16QI 1 “register_operand” “0”) (match_operand:V16QI 2 “nonimmediate_operand” “xm”)] UNSPEC_PSHUFB))] “TARGET_SSSE3” “pshufb\t{%2, %0|%0, %2}”; [(set_attr “type” “sselog1”) (set_attr “mode” “TI”)])
(define_insn “ssse3_pshufbv8qi3” [(set (match_operand:V8QI 0 “register_operand” “=y”) (unspec:V8QI [(match_operand:V8QI 1 “register_operand” “0”) (match_operand:V8QI 2 “nonimmediate_operand” “ym”)] UNSPEC_PSHUFB))] “TARGET_SSSE3” “pshufb\t{%2, %0|%0, %2}”; [(set_attr “type” “sselog1”) (set_attr “mode” “DI”)])
(define_insn “ssse3_psign3” [(set (match_operand:SSEMODE124 0 “register_operand” “=x”) (unspec:SSEMODE124 [(match_operand:SSEMODE124 1 “register_operand” “0”) (match_operand:SSEMODE124 2 “nonimmediate_operand” “xm”)] UNSPEC_PSIGN))] “TARGET_SSSE3” “psign\t{%2, %0|%0, %2}”; [(set_attr “type” “sselog1”) (set_attr “mode” “TI”)])
;; APPLE LOCAL begin 4656532 use V1DImode for _m64 (define_insn “ssse3_psign3” [(set (match_operand:MMXMODE124 0 “register_operand” “=y”) (unspec:MMXMODE124 [(match_operand:MMXMODE124 1 “register_operand” “0”) (match_operand:MMXMODE124 2 “nonimmediate_operand” “ym”)] UNSPEC_PSIGN))] “TARGET_SSSE3” “psign\t{%2, %0|%0, %2}”; [(set_attr “type” “sselog1”) (set_attr “mode” “DI”)]) ;; APPLE LOCAL end 4656532 use V1DImode for _m64
(define_insn “ssse3_palignrti” [(set (match_operand:TI 0 “register_operand” “=x”) (unspec:TI [(match_operand:TI 1 “register_operand” “0”) (match_operand:TI 2 “nonimmediate_operand” “xm”) (match_operand:SI 3 “const_0_to_255_mul_8_operand” “n”)] UNSPEC_PALIGNR))] “TARGET_SSSE3” { operands[3] = GEN_INT (INTVAL (operands[3]) / 8); return “palignr\t{%3, %2, %0|%0, %2, %3}”; } [(set_attr “type” “sseishft”) (set_attr “mode” “TI”)])
;; APPLE LOCAL begin 4656532 use V1DImode for _m64 (define_insn “ssse3_palignrv1di” [(set (match_operand:V1DI 0 “register_operand” “=y”) (unspec:V1DI [(match_operand:V1DI 1 “register_operand” “0”) (match_operand:V1DI 2 “nonimmediate_operand” “ym”) (match_operand:SI 3 “const_0_to_255_mul_8_operand” “n”)] UNSPEC_PALIGNR))] “TARGET_SSSE3” { operands[3] = GEN_INT (INTVAL (operands[3]) / 8); return “palignr\t{%3, %2, %0|%0, %2, %3}”; } [(set_attr “type” “sseishft”) (set_attr “mode” “DI”)]) ;; APPLE LOCAL end 4656532 use V1DImode for _m64
(define_insn “ssse3_pabs2” [(set (match_operand:SSEMODE124 0 “register_operand” “=x”) (abs:SSEMODE124 (match_operand:SSEMODE124 1 “nonimmediate_operand” “xm”)))] “TARGET_SSSE3” “pabs\t{%1, %0|%0, %1}”; [(set_attr “type” “sselog1”) (set_attr “mode” “TI”)])
;; APPLE LOCAL begin 4656532 use V1DImode for _m64 (define_insn “ssse3_pabs2” [(set (match_operand:MMXMODE124 0 “register_operand” “=y”) (abs:MMXMODE124 (match_operand:MMXMODE124 1 “nonimmediate_operand” “ym”)))] “TARGET_SSSE3” “pabs\t{%1, %0|%0, %1}”; [(set_attr “type” “sselog1”) (set_attr “mode” “DI”)]) ;; APPLE LOCAL end 4656532 use V1DImode for _m64 ; APPLE LOCAL end ssse3